[ubuntu/artful-proposed] dbus 1.10.18-1ubuntu2 (Accepted)

Jeremy Bicha jbicha at ubuntu.com
Mon Jun 19 01:47:13 UTC 2017


dbus (1.10.18-1ubuntu2) artful; urgency=medium

  * Restore accidentally dropped debian/rules modification
    to not start D-Bus on package installation

dbus (1.10.18-1ubuntu1) artful; urgency=medium

  * Sync with Debian. Remaining changes:
    - Clean up /etc/init/dbus.conf on upgrades. This needs to be kept until
      after 18.04 LTS.
    - Add dont-stop-dbus.patch: Don't stop D-Bus in the service unit
      (see patch header and upstream bug for details). Fixes various
      causes of shutdown hangs, particularly with remote file systems.
      (LP: #1438612) (LP: #1540282)
    - debian/dbus.postinst, debian/rules: Don't start D-Bus on package
      installation, as that doesn't work any more with dont-stop-dbus.patch.
      Instead, start dbus.socket in postinst, which will then start D-Bus
      on demand after package installation.
    - Add aa-get-connection-apparmor-security-context.patch: This is not
      intended for upstream inclusion. It implements a bus method
      (GetConnectionAppArmorSecurityContext) to get a connection's AppArmor
      security context but upstream D-Bus has recently added a generic way of
      getting a connection's security credentials (GetConnectionCredentials).
      Ubuntu should carry this patch until packages in the archive are moved
      over to the new, generic method of getting a connection's credentials.
  * Dropped changes:
    - make-uid-0-immune-to-timeout.patch: Applied in new release
    - debian/dbus.user-session.upstart

dbus (1.10.18-1) unstable; urgency=medium

  * New upstream stable release
    - On SELinux systems, make sure the thread that reads AVC
      notifications retains the ability to write the audit log
      (Closes: #857660)
    - Fix a read overflow and some memory leaks in a unit test
      (no effect on production systems)

dbus (1.10.16-1) unstable; urgency=medium

  * New upstream release
    - Contains a security fix for a potential symlink attack in the
      nonce-tcp transport. That transport is not normally used (or
      recommended) on Unix.

dbus (1.10.14-1) unstable; urgency=medium

  * New upstream release

dbus (1.10.12-1) unstable; urgency=medium

  * New upstream release
  * d/p/backports/Replace-DBUS_USE_TEST_BINARY-with-DBUS_TEST_DBUS_LAUNCH.patch:
    backport a change from 1.11.2 to make the debug build of libdbus
    reproducible under varying build paths
  * Move Debian-specific patches to debian/patches/debian (corresponding
    to "Gbp-pq: Topic debian" on the patch queue branch)
  * debian/*.lintian-overrides:
    - override systemd-service-file-missing-install-key for dbus.service,
      which is intentionally statically enabled
    - override embedded-javascript-library for Doxygen's jquery.js,
      which is not actually libjs-jquery (see #736360)
  * Move to debhelper compat level 10
    - drop options and overrides that are now the default

dbus (1.10.10-1) unstable; urgency=medium

  * New upstream stable release 1.10.10
  * Provide new virtual packages for other packages to depend on:
    - dbus-session-bus: any implementation of the D-Bus well-known session bus
      (provided by: dbus-user-session, dbus-x11)
    - default-dbus-session-bus: the recommended implementation of
      dbus-session-bus (currently provided by: dbus-user-session)
  * Add arm64, mips64el, ppc64el to the list of architectures that
    have valgrind
  * debian/gbp.conf: use DEP-14 branch names
  * Standards-Version: 3.9.8 (no changes needed)
  * debian/rules: fail the build if "make install" installs anything we
    don't package or delete. Only do this for final releases (suite
    in debian/changelog is not UNRELEASED) to facilitate future
    autobuilding of new upstream releases.
  * debian/rules: do not require symbols file to be complete if the
    suite in debian/changelog is UNRELEASED, again to facilitate
    autobuilding new upstream releases.
  * debian/source/options: don't fail dpkg-source on changes to
    build-aux/{compile,depcomp,missing}. We regenerate that directory anyway,
    and during a snapshot build they might become symlinks.
  * debian/rules: do the build in debian/build-* so it's easier to .gitignore
  * debian/.gitignore: update
  * Use the correct systemctl for Debian even if not installed on the build
    system. (Regression in 1.10.2)

Date: Sun, 18 Jun 2017 21:44:39 -0400
Changed-By: Jeremy Bicha <jbicha at ubuntu.com>
Maintainer: Ubuntu Developers <ubuntu-devel-discuss at lists.ubuntu.com>
https://launchpad.net/ubuntu/+source/dbus/1.10.18-1ubuntu2
-------------- next part --------------
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA512

Format: 1.8
Date: Sun, 18 Jun 2017 21:44:39 -0400
Source: dbus
Binary: dbus dbus-1-dbg dbus-1-doc dbus-tests dbus-udeb dbus-user-session dbus-x11 libdbus-1-3 libdbus-1-3-udeb libdbus-1-dev
Architecture: source
Version: 1.10.18-1ubuntu2
Distribution: artful
Urgency: medium
Maintainer: Ubuntu Developers <ubuntu-devel-discuss at lists.ubuntu.com>
Changed-By: Jeremy Bicha <jbicha at ubuntu.com>
Description:
 dbus       - simple interprocess messaging system (daemon and utilities)
 dbus-1-dbg - simple interprocess messaging system (debug symbols)
 dbus-1-doc - simple interprocess messaging system (documentation)
 dbus-tests - simple interprocess messaging system (test infrastructure)
 dbus-udeb  - simple interprocess messaging system (minimal runtime) (udeb)
 dbus-user-session - simple interprocess messaging system (systemd --user integration)
 dbus-x11   - simple interprocess messaging system (X11 deps)
 libdbus-1-3 - simple interprocess messaging system (library)
 libdbus-1-3-udeb - simple interprocess messaging system (minimal library) (udeb)
 libdbus-1-dev - simple interprocess messaging system (development headers)
Closes: 857660
Launchpad-Bugs-Fixed: 1438612 1540282
Changes:
 dbus (1.10.18-1ubuntu2) artful; urgency=medium
 .
   * Restore accidentally dropped debian/rules modification
     to not start D-Bus on package installation
 .
 dbus (1.10.18-1ubuntu1) artful; urgency=medium
 .
   * Sync with Debian. Remaining changes:
     - Clean up /etc/init/dbus.conf on upgrades. This needs to be kept until
       after 18.04 LTS.
     - Add dont-stop-dbus.patch: Don't stop D-Bus in the service unit
       (see patch header and upstream bug for details). Fixes various
       causes of shutdown hangs, particularly with remote file systems.
       (LP: #1438612) (LP: #1540282)
     - debian/dbus.postinst, debian/rules: Don't start D-Bus on package
       installation, as that doesn't work any more with dont-stop-dbus.patch.
       Instead, start dbus.socket in postinst, which will then start D-Bus
       on demand after package installation.
     - Add aa-get-connection-apparmor-security-context.patch: This is not
       intended for upstream inclusion. It implements a bus method
       (GetConnectionAppArmorSecurityContext) to get a connection's AppArmor
       security context but upstream D-Bus has recently added a generic way of
       getting a connection's security credentials (GetConnectionCredentials).
       Ubuntu should carry this patch until packages in the archive are moved
       over to the new, generic method of getting a connection's credentials.
   * Dropped changes:
     - make-uid-0-immune-to-timeout.patch: Applied in new release
     - debian/dbus.user-session.upstart
 .
 dbus (1.10.18-1) unstable; urgency=medium
 .
   * New upstream stable release
     - On SELinux systems, make sure the thread that reads AVC
       notifications retains the ability to write the audit log
       (Closes: #857660)
     - Fix a read overflow and some memory leaks in a unit test
       (no effect on production systems)
 .
 dbus (1.10.16-1) unstable; urgency=medium
 .
   * New upstream release
     - Contains a security fix for a potential symlink attack in the
       nonce-tcp transport. That transport is not normally used (or
       recommended) on Unix.
 .
 dbus (1.10.14-1) unstable; urgency=medium
 .
   * New upstream release
 .
 dbus (1.10.12-1) unstable; urgency=medium
 .
   * New upstream release
   * d/p/backports/Replace-DBUS_USE_TEST_BINARY-with-DBUS_TEST_DBUS_LAUNCH.patch:
     backport a change from 1.11.2 to make the debug build of libdbus
     reproducible under varying build paths
   * Move Debian-specific patches to debian/patches/debian (corresponding
     to "Gbp-pq: Topic debian" on the patch queue branch)
   * debian/*.lintian-overrides:
     - override systemd-service-file-missing-install-key for dbus.service,
       which is intentionally statically enabled
     - override embedded-javascript-library for Doxygen's jquery.js,
       which is not actually libjs-jquery (see #736360)
   * Move to debhelper compat level 10
     - drop options and overrides that are now the default
 .
 dbus (1.10.10-1) unstable; urgency=medium
 .
   * New upstream stable release 1.10.10
   * Provide new virtual packages for other packages to depend on:
     - dbus-session-bus: any implementation of the D-Bus well-known session bus
       (provided by: dbus-user-session, dbus-x11)
     - default-dbus-session-bus: the recommended implementation of
       dbus-session-bus (currently provided by: dbus-user-session)
   * Add arm64, mips64el, ppc64el to the list of architectures that
     have valgrind
   * debian/gbp.conf: use DEP-14 branch names
   * Standards-Version: 3.9.8 (no changes needed)
   * debian/rules: fail the build if "make install" installs anything we
     don't package or delete. Only do this for final releases (suite
     in debian/changelog is not UNRELEASED) to facilitate future
     autobuilding of new upstream releases.
   * debian/rules: do not require symbols file to be complete if the
     suite in debian/changelog is UNRELEASED, again to facilitate
     autobuilding new upstream releases.
   * debian/source/options: don't fail dpkg-source on changes to
     build-aux/{compile,depcomp,missing}. We regenerate that directory anyway,
     and during a snapshot build they might become symlinks.
   * debian/rules: do the build in debian/build-* so it's easier to .gitignore
   * debian/.gitignore: update
   * Use the correct systemctl for Debian even if not installed on the build
     system. (Regression in 1.10.2)
Checksums-Sha1:
 7ef4cf2842ac19811a64493d1cdee15a8fea09db 3148 dbus_1.10.18-1ubuntu2.dsc
 c7b5669fa54b9535bdef6d5938fad830f6a85841 59112 dbus_1.10.18-1ubuntu2.debian.tar.xz
 3010aba43a8e158fe1529ef7f835f097c75e84c4 7423 dbus_1.10.18-1ubuntu2_source.buildinfo
Checksums-Sha256:
 090af09d4ac193e68a29b7f590aad7d9c3ebb6ff70ee8fd2f1f958f237ae4961 3148 dbus_1.10.18-1ubuntu2.dsc
 c86d927d09c8cbfac254cc3b17685d958e12ebc495b44b26edb748f540cea8a5 59112 dbus_1.10.18-1ubuntu2.debian.tar.xz
 aa29582f958e0fc06f50adffcd773e7b30f76bd5b78b05ed8e690ad0b253f769 7423 dbus_1.10.18-1ubuntu2_source.buildinfo
Files:
 1ef243b80fee3d7082419f88dd2edd41 3148 admin optional dbus_1.10.18-1ubuntu2.dsc
 2e976c0f855c2a87413b589268bd6f86 59112 admin optional dbus_1.10.18-1ubuntu2.debian.tar.xz
 25fa6ab2919d91008eff2a9407d5bfde 7423 admin optional dbus_1.10.18-1ubuntu2_source.buildinfo
Original-Maintainer: Utopia Maintenance Team <pkg-utopia-maintainers at lists.alioth.debian.org>

-----BEGIN PGP SIGNATURE-----
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=s2V/
-----END PGP SIGNATURE-----


More information about the Artful-changes mailing list