[ubuntu/artful-proposed] system-config-printer 1.5.9+20170523-0ubuntu2 (Accepted)
Till Kamppeter
till.kamppeter at gmail.com
Thu May 25 00:49:14 UTC 2017
system-config-printer (1.5.9+20170523-0ubuntu2) artful; urgency=medium
* Merged in changes from the Debian package, remaining Ubuntu changes:
- debian/control.in:
+ Have system-config-printer depend on gir1.2-gnomekeyring-1.0 and
gir1.2-packagekitglib-1.0, recommend avahi-utils, and only suggest
python3-smbc. Also Breaks/Replaces: system-config-printer-gnome
+ Have system-config-printer-udev recommend ippusbxd
+ Let system-config-printer-gnome be a transitional package.
- debian/local/70-printers.rules,
debian/local/udev-configure-printer at .service:
+ Let systemd do the UDEV-triggered call of udev-configure-printer in a
way so that systemd does not kill ippusbxd after some minutes.
- debian/local/source_system-config-printer.py:
+ Apport hook
- debian/patches/0010-no-start-printer-applet-gnome.patch
+ Also do not start printer applet with Unity and LXDE.
- debian/patches/03_install_layout.patch
+ Install with --install-layout=deb
- debian/patches/05_menu_entries.patch:
+ Show 'Printers' in Unity Settings app.
- debian/patches/06_rename_settings_panel.patch:
+ Rename app name to 'Printers' for better UI consistency with Unity
- debian/patches/07_driver-auto-download-configuration.patch:
+ Allow installing packages and non-free software via OpenPrinting
- debian/patches/33_ipp-over-usb-support.patch:
+ debian/patches/support for IPP-over-USB printers using ippusbxd
- debian/patches/40_do-not-show-media-col-option.patch:
+ Suppress the display of the "media-col" attribute since this is not a
user-configurable option
- debian/patches/43_options-py-use-debugprint.patch, 45_ppds-py-use-debugprint.patch:
+ Silence console output
- debian/patches/47_installpackage-return-only-if-installation-complete.patch:
+ Don't exit when installing a package via installpackage.py until the
package is completely installed.
- debian/patches/50_newprinter-support-smb-printer-setup-without-samba-installed.patch:
+ Allow setup of SMB printers without Samba client software installed.
Install the software as soon as it is needed for browsing the network
and using the printer.
- debian/patches/53_fix-connections-list-in-new-printer-window.patch:
+ Fixed connection type list for detected/discovered printers on the
"Devices" tab of the new-printer window. The list was too small so
that the options were not visible.
- debian/patches/55_fix-identifying-network-printers-as-same-host.patch:
+ In some cases two entries under the discovered network printers were
not identified as coming from the same host (= physical printer).
Fixed.
- debian/patches/57_mark-ipp-printer-discovered-by-driverless-utility.patch:
+ If an IPP printer is discovered by the "driverless" utility from
cups-filters, give it a "driverless" mark in the list of possible
connections for the network printers, to guide the user to an easy
way to set up the printer.
- debian/patches/60_prioritize-ipp-in-connections-list.patch:
+ As IPP is the most modern and sophisticated network printing protocol
and especially supports driverless printing, let IPP options show first
in the list of possible connections for a discovered network printer.
Only HPLIP stays more highly prioritized as for HP multi-function
devices as HPLIP print queue is required for the scanner to work.
- debian/patches/63_do-not-use-driverless-ppd-on-non-ipp-connection.patch:
+ Make sure that auto-generated PPD files for driverless printing are
not used when another connection type than IPP is used for the printer.
In driverless printing options are sent to the printers as IPP
attributes.
- debian/patches/65_prefer-driverless-ppds.patch:
+ Prioritize auto-generated PPD files for driverless printing, as
they poll the properties from the printer, they represent the
printer best.
- debian/patches/67_display-correct-icons.patch:
+ Fixed display of printer icons in the main window, now the icons
correctly represent local printers and network prrinters.
- debian/python3-cupshelpers.install:
+ Install debug.py and smburi.py into python3-cupshelpers package,
needed by the patches.
+ Fixed mask for *.egg-info file.
- debian/system-config-printer-common.install:
+ Install Apport hook.
- debian/system-config-printer-udev.install:
+ Install UDEV and systemd files for ippusbxd support.
* Refreshed patches with quilt:
- 05_menu_entries.patch
* Added "Requires=cups.socket" and "After=cups.socket" to
debian/local/udev-configure-printer at .service
Date: Wed, 24 May 2017 16:23:30 -0300
Changed-By: Till Kamppeter <till.kamppeter at gmail.com>
Maintainer: Ubuntu Developers <ubuntu-devel-discuss at lists.ubuntu.com>
https://launchpad.net/ubuntu/+source/system-config-printer/1.5.9+20170523-0ubuntu2
-------------- next part --------------
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Format: 1.8
Date: Wed, 24 May 2017 16:23:30 -0300
Source: system-config-printer
Binary: system-config-printer system-config-printer-common python3-cupshelpers system-config-printer-udev system-config-printer-gnome
Architecture: source
Version: 1.5.9+20170523-0ubuntu2
Distribution: artful
Urgency: medium
Maintainer: Ubuntu Developers <ubuntu-devel-discuss at lists.ubuntu.com>
Changed-By: Till Kamppeter <till.kamppeter at gmail.com>
Description:
python3-cupshelpers - Python utility modules around the CUPS printing system
system-config-printer - graphical interface to configure the printing system
system-config-printer-common - backend and the translation files for system-config-printer
system-config-printer-gnome - graphical interface to configure printers (transitional package)
system-config-printer-udev - Utilities to detect and configure printers automatically
Changes:
system-config-printer (1.5.9+20170523-0ubuntu2) artful; urgency=medium
.
* Merged in changes from the Debian package, remaining Ubuntu changes:
- debian/control.in:
+ Have system-config-printer depend on gir1.2-gnomekeyring-1.0 and
gir1.2-packagekitglib-1.0, recommend avahi-utils, and only suggest
python3-smbc. Also Breaks/Replaces: system-config-printer-gnome
+ Have system-config-printer-udev recommend ippusbxd
+ Let system-config-printer-gnome be a transitional package.
- debian/local/70-printers.rules,
debian/local/udev-configure-printer at .service:
+ Let systemd do the UDEV-triggered call of udev-configure-printer in a
way so that systemd does not kill ippusbxd after some minutes.
- debian/local/source_system-config-printer.py:
+ Apport hook
- debian/patches/0010-no-start-printer-applet-gnome.patch
+ Also do not start printer applet with Unity and LXDE.
- debian/patches/03_install_layout.patch
+ Install with --install-layout=deb
- debian/patches/05_menu_entries.patch:
+ Show 'Printers' in Unity Settings app.
- debian/patches/06_rename_settings_panel.patch:
+ Rename app name to 'Printers' for better UI consistency with Unity
- debian/patches/07_driver-auto-download-configuration.patch:
+ Allow installing packages and non-free software via OpenPrinting
- debian/patches/33_ipp-over-usb-support.patch:
+ debian/patches/support for IPP-over-USB printers using ippusbxd
- debian/patches/40_do-not-show-media-col-option.patch:
+ Suppress the display of the "media-col" attribute since this is not a
user-configurable option
- debian/patches/43_options-py-use-debugprint.patch, 45_ppds-py-use-debugprint.patch:
+ Silence console output
- debian/patches/47_installpackage-return-only-if-installation-complete.patch:
+ Don't exit when installing a package via installpackage.py until the
package is completely installed.
- debian/patches/50_newprinter-support-smb-printer-setup-without-samba-installed.patch:
+ Allow setup of SMB printers without Samba client software installed.
Install the software as soon as it is needed for browsing the network
and using the printer.
- debian/patches/53_fix-connections-list-in-new-printer-window.patch:
+ Fixed connection type list for detected/discovered printers on the
"Devices" tab of the new-printer window. The list was too small so
that the options were not visible.
- debian/patches/55_fix-identifying-network-printers-as-same-host.patch:
+ In some cases two entries under the discovered network printers were
not identified as coming from the same host (= physical printer).
Fixed.
- debian/patches/57_mark-ipp-printer-discovered-by-driverless-utility.patch:
+ If an IPP printer is discovered by the "driverless" utility from
cups-filters, give it a "driverless" mark in the list of possible
connections for the network printers, to guide the user to an easy
way to set up the printer.
- debian/patches/60_prioritize-ipp-in-connections-list.patch:
+ As IPP is the most modern and sophisticated network printing protocol
and especially supports driverless printing, let IPP options show first
in the list of possible connections for a discovered network printer.
Only HPLIP stays more highly prioritized as for HP multi-function
devices as HPLIP print queue is required for the scanner to work.
- debian/patches/63_do-not-use-driverless-ppd-on-non-ipp-connection.patch:
+ Make sure that auto-generated PPD files for driverless printing are
not used when another connection type than IPP is used for the printer.
In driverless printing options are sent to the printers as IPP
attributes.
- debian/patches/65_prefer-driverless-ppds.patch:
+ Prioritize auto-generated PPD files for driverless printing, as
they poll the properties from the printer, they represent the
printer best.
- debian/patches/67_display-correct-icons.patch:
+ Fixed display of printer icons in the main window, now the icons
correctly represent local printers and network prrinters.
- debian/python3-cupshelpers.install:
+ Install debug.py and smburi.py into python3-cupshelpers package,
needed by the patches.
+ Fixed mask for *.egg-info file.
- debian/system-config-printer-common.install:
+ Install Apport hook.
- debian/system-config-printer-udev.install:
+ Install UDEV and systemd files for ippusbxd support.
* Refreshed patches with quilt:
- 05_menu_entries.patch
* Added "Requires=cups.socket" and "After=cups.socket" to
debian/local/udev-configure-printer at .service
Checksums-Sha1:
f73d39f4740bc62171bb254d1aa2ef388581eda1 2228 system-config-printer_1.5.9+20170523-0ubuntu2.dsc
59dc75190232884ab5a8b5eda4095418c76652b7 28736 system-config-printer_1.5.9+20170523-0ubuntu2.debian.tar.xz
Checksums-Sha256:
155c9a7ee1b9afa1c47e61c014b278102c957c829fe00c8323c3e0bcb91ddb4b 2228 system-config-printer_1.5.9+20170523-0ubuntu2.dsc
22cee714d59e7d034deb4fbce4eec44201cecfce3665de0a4cbe0139e7342797 28736 system-config-printer_1.5.9+20170523-0ubuntu2.debian.tar.xz
Files:
eaad0960efb42b81631f3c2241837e97 2228 gnome optional system-config-printer_1.5.9+20170523-0ubuntu2.dsc
ef230eae543c60843dc51439cca5cb1d 28736 gnome optional system-config-printer_1.5.9+20170523-0ubuntu2.debian.tar.xz
Original-Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers at lists.alioth.debian.org>
-----BEGIN PGP SIGNATURE-----
iEYEARECAAYFAlkmKcMACgkQTuVatl/cKEmqgACeOq6F8momwbCHWZcXll0NAe6j
f80AoKHDBveRxaF6KEJ0/0UgbDpHaWlk
=TQgC
-----END PGP SIGNATURE-----
More information about the Artful-changes
mailing list