[ubuntu-cloud-archive/train-proposed] debhelper (Accepted)
Corey Bryant
corey.bryant at canonical.com
Thu Aug 22 15:20:39 UTC 2019
debhelper (12.1.1ubuntu1~cloud0) bionic-train; urgency=medium
.
* New upstream release for the Ubuntu Cloud Archive.
.
debhelper (12.1.1ubuntu1) eoan; urgency=medium
.
* Merge from Debian testing. Remaining changes:
- Generate ddebs from debhelper instead of pkg-create-dbgsym:
+ Make debhelper Conflict/Replace pkg-create-dbgsym to force it off.
+ Set DBGSYM_PACKAGE_TYPE to ddeb to get correct debian/files output.
- dh_installchangelogs: Do not install upstream changelog in compat
level 7 and higher to avoid pointlessly bloating installed packages.
.
debhelper (12.1.1) unstable; urgency=medium
.
* dh_installinitramfs: Install hooks as executable rather than
plan files. Thanks to Thorsten Glaser for the report.
(Closes: #922990)
* dh_compress: Fix bug where examples where compressed when a
doc package shipped examples for another package. Thanks to
Christian Kastner for reporting this. (Closes: #922267)
.
debhelper (12.1) unstable; urgency=medium
.
[ Xavier Guimard ]
* dh_fixperms: add .node in mode_0644_patterns.
.
[ Sylvestre Ledru ]
* dh_strip: Print a warning when an ELF binary does not have a
build-id (or when dh_strip cannot find it).
.
[ Niels Thykier ]
* Dh_Lib.pm: Strip leading and trailing whitespace from lines in
regular debhelper config files. Whitespace-only lines from
executable config files are now explicitly detected and triggers
a human readable error message early rather than warnings/errors
about uninitialized variables. Thanks to Ben Finney for the
suggestion and the initial patch. (Closes: #919853)
* meson.pm: Dump "meson-logs/testlog.txt" if testing fails with
an error. Thanks to Jeremy Bicha for the suggestion.
(Closes: #918066)
* dh_missing: Clarify the documentation about when -X with other
helpers can may dh_missing ignore paths that are not installed.
Thanks to Hilko Bengen for reporting the original documentation
was unsufficient. (Closes: #917362)
* d/control: Bump Standards-Version to 4.3.0 - no changes required.
.
[ Baptiste Jammet ]
* fr.po: Update French translation. (Closes: #921254)
.
debhelper (12ubuntu1) disco; urgency=medium
.
* Merge from Debian Sid. Remaining changes:
- Generate ddebs from debhelper instead of pkg-create-dbgsym:
+ Make debhelper Conflict/Replace pkg-create-dbgsym to force it off.
+ Set DBGSYM_PACKAGE_TYPE to ddeb to get correct debian/files output.
- dh_installchangelogs: Do not install upstream changelog in compat
level 7 and higher to avoid pointlessly bloating installed packages.
.
debhelper (12) unstable; urgency=medium
.
[ Niels Thykier ]
* Release debhelper/12 marking compat 12 as stable.
* dh: Special NOOP PROMISE of cli-options() to always allow skipping
the helper (as we know no option can make it change behaviour).
.
[ Dmitry Shachnev ]
* dh_compress: Do not compress mkdocs search indices
(search_index.json).
.
debhelper (11.5.4) unstable; urgency=medium
.
[ Niels Thykier ]
* Dh_Lib.pm: Reopen stdin to read from /dev/null in doit (and its sibling
functions) to prevent issues when stdin is open in write-only mode
(which is what nohup(1) does). Thanks to Julian Gilbey for reporting
the issue and providing a sample patch for it as well.
(Closes: #913663)
* fr.po: Add missing dash in "--parallel" in a translation. Thanks to
Christian Marillat for reporting the issue. (Closes: #915255)
* debhelper.7: Document that the "python-distutils" build system is
removed in compat 12. Thanks to Axel Beckert for reporting the
omission. (Closes: #915530)
.
[ Luca Boccassi ]
* makefile.pm: revert passing V=0/1 to makefiles. Fixes FTBFS in apcupsd
(and possibly more).
(Closes: #914419)
.
debhelper (11.5.3ubuntu1) disco; urgency=medium
.
* Merge from Debian testing. Remaining changes:
- Generate ddebs from debhelper instead of pkg-create-dbgsym
+ Make debhelper Conflict/Replace pkg-create-dbgsym to force it off.
+ Set DBGSYM_PACKAGE_TYPE to ddeb to get correct debian/files output.
- dh_installchangelogs: Do not install upstream changelog in compat
level 7 and higher to avoid pointlessly bloating installed packages.
.
debhelper (11.5.3) unstable; urgency=medium
.
[ Helmut Grohne ]
* cmake.pm: Pass the usual CMAKE_SYSTEM_PROCESSOR for ppc64el
when cross compiling. (Closes: #913425)
.
debhelper (11.5.2) unstable; urgency=medium
.
[ Luca Boccassi ]
* makefile.pm: Pass V=0 or V=1 to the make file depending on
whether "terse" is set in DEB_BUILD_OPTIONS.
.
[ Niels Thykier ]
* dh_gconf: Mark dh_gconf as deprecated (see #908845).
* Dh_Lib.pm: Separate lowest non-deprecated compat level and
the lowest compat level we generate "debhelper-compat (= X)"
relations for.
* Dh_Lib.pm: Open compat level 13 as an experimental compat
level.
* meson.pm: In compat 13, run tests with "meson test" rather
than "ninja test". Thanks to Simon McVittie for the
suggestion. (Closes: #912560)
* dh: Correctly include dh_installsystemduser in the sequence
in compat 12. It was excluded due to an inverted boolean
meaning it was added in compat up to (and incl.) compat 11.
Thanks to Michael Biebl for reporting the issue.
(Closes: #913329)
* fr.po: Correct translations for dh_installman.1 which
incorrectly implied that dh_installman was deprecated.
Thanks to Laurent Bigonville for reporting the issue.
(Closes: #912978)
.
[ Helmut Grohne ]
* cmake.pm: Pass QMAKE_EXECUTABLE when cross-building.
(Closes: #913415)
.
debhelper (11.5.1) unstable; urgency=medium
.
* dh_systemd_start: Fix bug introduced in debhelper/11.5 where
dh_systemd_start would fail to substitute a token in the
generated maintscript for maintainer scripts when using
"--restart-after-upgrade" (including when the option is
on by default). Thanks to Colin Watson for reporting the
bug. (Closes: #912420)
.
debhelper (11.5) unstable; urgency=medium
.
[ Daniele Nicolodi ]
* dh_installsystemduser: New helper responsible for istalling package
maintainer supplied systemd user instance units and to produce
postinst and postrm maintiner scripts code blocks to appropriately
enable, mask and disable units when the package is installed,
upgraded, or removed. (Closes: #764678)
.
[ Niels Thykier ]
* dh_installsystemd.1: Improve the documentation for --name to make
it more clear that it also changes the name of the source files in
the debian directory. Thanks to Emel Hasdal for reporting the
issue and reviewing the change. (Closes: #899983)
.
debhelper (11.4.1) unstable; urgency=medium
.
[ Niels Thykier ]
* debhelper.pod: Quote the value of INSTALL in description of
compat level 11. Thanks to Josh Triplett for the suggestion
(Closes: #908906)
* d/changelog: Fix typos in old entries.
* dh_strip: Remove empty /usr/lib/debug directories left over
by dh_dwz. Thanks to Ferenc Wgner for reporting the issue.
(Closes: #909303)
* dh: Disable optimization to skip tools based on command-line
parameters when dh is passed long options. Since debhelper
had implicit support for auto-abbrevation of long options
and people have started to rely on it, the optimization in
debhelper/11.4 caused regressions. The optimization is
still enabled for short options. (Closes: #909704)
.
[ Josh Triplett ]
* debhelper.pod: Document how to declare the debhelper compat
level via the "debhelper-compat (= X)"-method.
(Closes: #908909)
* debhelper.pod: Document that we do not provide debhelper-compat
for experimental/beta versions of compat levels.
(Closes: #908907)
* doc/PROGRAMMING: Fix typos.
.
debhelper (11.4) unstable; urgency=medium
.
[ Niels Thykier ]
* dh_dwz.1: Remove now obsolete note in manpage claming that dh_dwz
was experimental. Since debhelper/11.3, dh_dwz was no longer
experimental.
* cmake.pm: Explicitly set CMAKE_INSTALL_LIBDIR on native builds.
This should not make any pratical difference but aligns the
behaviour of native and cross builds. Thanks to Simon McVittie
for the suggestion. (Closes: #903042)
* autoconf.pm: Leave --libexecdir at upstream default (/usr/libexec)
in compat 12 and later. (Closes: #859724)
* meson.pm: Ditto.
* dh: Support implicitly loading addons via "dh-sequence-${name}"
relations in Build-Depends (which would imply "dh ... --with ${name}").
Only simple relations in Build-Depends are considered at the moment.
* debian/control: Provide dh-sequence-dwz, dh-sequence-installinitramfs,
and dh-sequence-systemd, which enables packages to use the new
feature to implicitly autoload dh addons via Build-Depends.
* dh_md5sums: Rewrite handling of conffiles and excludes to better
support an arbitrary number of files that should be omitted from the
md5sums file. Previously, dh_md5sums could fail with the error:
"""... "/bin/sh": Argument list too long at ..."""
(Closes: #864182)
* dh_installinit.1: Correct documentation which was inaccurate in relation
to which compat levels where dh_installinit still supported systemd
items and upstart jobs. Thanks to Theodore Y. Ts'o for bring up the
issue.
* dh_installdeb: In compat 12, ignore the maintainer provided conffiles.
It has not been useful since compat 3.
* Dh_Lib.pm: isnative() now also resets $dh{VERSION} as a side-effect when
using the cache to answer the request. This is mostly useful because
it enables the following optimization.
* Dh_Lib.pm: Have isnative() special-case debian/changelog to avoid
reparsing that file over and over in the same helper.
* dh_gconf: Explicitly declare the --priority parameter with the intention
to remove it from the default debhelper options.
* dh_installemacsen: Ditto.
* dh_installgsettings: Ditto.
* dh_installudev: Ditto.
* dh_installwm: Ditto.
* Dh_Getopt.pm: Remove --priority from the list of options supported by all
debhelper tools. The only external consumer was dh_installtex from
tex-common, which was fixed in 6.10.
* dh_installinit: In compat 12, pass --skip-systemd-native to update-rc.d
to make it ignore systemd services.
* dh_installsystemd: In compat 12, avoid relying on dh_installinit's
shell snippets for starting services. (Closes: #887904, #887900)
* dh_installinit: Drop unnecessary "systemctl daemon-reload" in
auto-generated postrm script. The systemd package has a trigger for
handling sysvinit scripts and dh_installsystemd handles the requirement
for native systemd unit files.
* dh_clean: Explicitly declare the -k/--keep parameter with the intention
to remove it from the default debhelper options.
* dh_installchangelogs: Ditto.
* dh_strip: Ditto.
* Dh_Getopt.pm: Remove -k/--keep from the list of options supported by all
debhelper tools. The only external consumer was dh_gtkmodules which is now
deprecated and a "noop" command. No consumers of dh_gtkmodules appear to
pass -k/--keep to dh_gtkmodules any longer.
* dh: Rewrite command line optimization logic to enable support for a new
NOOP PROMISE for command line options. This will make dh able to skip
helpers in some cases even when passed options. (Closes: #866581)
* dh_*: Add a NOOP PROMISE for command options where applicable.
* dh: Remove old compatibility code from compat 10 that never worked.
* Dh_Getopt.pm: Fix a bug that would make "-S" be interpreted as "-s" when
"-S" was not given an argument.
* debian/control: Bump Standards-Versions to 4.2.1 - no changes required.
* debhelper.pod: Declare compat 12 in beta testing.
.
[ Juhani Numminen ]
* dh_installsystemd.1: Fix typo in manpage.
* dh_installinit.1: Ditto.
.
[ Fabian Wolff ]
* dh_installdocs.1: Fix typo.
* dh_link.1: Ditto.
.
[ Nicholas Guriev ]
* cmake.pm, autoconf.pm: honor QUIET setting (closes: #907738).
* Dh_Lib.pm: use terse build option to set QUIET setting (closes: #907595).
.
[ Clment Hermann ]
* debhelper.pod: Document dh_golang's DH_GOLANG_EXCLUDES behaviour change
for compat 12 (closes: #908656)
.
debhelper (11.3.5) unstable; urgency=medium
.
* Dh_Lib.pm: Introduce a new glob_expand error handler to
better emulate the old style glob code to fail when a
non-glob entry in the config file is missing.
* dh_installdocs: Use the new glob_expand error handler to
restore the behaviour to that of debhelper/10.5.1 and older.
Thanks to Christoph Berg for reporting the issue.
(Closes: #902355)
* dh_installexamples: Ditto.
* dh_installinfo: Ditto.
* dh_installman: Ditto.
* Dh_Lib.pm: Fix a bug where ending debian/control on (what
debhelper believed was) a comment line could cause debhelper
to omit the last package listed in the file. Thanks to
Santiago Vila for reporting the bug. (Closes: #902748)
.
debhelper (11.3.4) unstable; urgency=medium
.
* Dh_Lib.pm: Fix bug that made the parser assign the wrong
value from the Build-Profiles field. Thanks to Sven Joachim
for reporting the bug. (Closes: #902268)
* debhelper.pod: Rewrite the compat 11 change on "main doc
packages" in an attempt to clarify what is happening in
compat 11. Thanks to Paul Gevers for pointing out some of
the confusing aspects.
.
debhelper (11.3.3) unstable; urgency=medium
.
[ Niels Thykier ]
* d/control: Remove versioned Breaks on qt5-qmake as it
prevents others from backporting qt5 packages to
stable-backports. The Breaks was added to assist
cross-building in buster and it has already served that
purpose by now.
* Dh_Lib.pm: Provide a more helpful diagnostic message when
an executable config file fails and it does not have a
#!-line (and is not an ELF binary). Thanks to Nadav
Ruskin for the suggestion. (Closes: #902214)
* debhelper.pod: Make a dedicated subsection about executable
debhelper config files to make them more prominent. Thanks
to Nadav Ruskin for the suggestion. (Closes: #901715)
* Dh_Lib.pm: Avoid forking a shell when running executable
debhelper config files.
* Dh_Lib.pm: Validate package names according the rules for
Debian packages. Thanks to Raphael Geissert and Tim
Dsterhus for the suggestion. (Closes: #567178)
* Dh_Lib.pm: Rewrite deb822 parser to validate d/control
more strictly. Particularly, debhelper no longer permits
the same field twice in a stanza. Thanks to Tim Dsterhus
for the suggestion.
* Dh_Lib.pm: Ensure that at most once definition of
(X-)Package-Type is used per stanza.
.
[ Roberto C. Snchez ]
* cmake.pm: Reorder arguments to cmake to make "-D FOO=BAR"
work. This form only works if it is before the directory
passed to cmake.
.
[ Daniele Nicolodi ]
* dh_installsystemd: Improve man page.
* dh_installsystemd: Tighten error handling: fail immediately if an unit
name not installed by the package is specified on the command line.
* dh_installsystemd: Fix the undocumented '--no-also' command line
option to do not affect handling of the Alias= directives.
* dh_installsystemd: Add timer units to the list of units considered
when the '--name' option is specified.
.
debhelper (11.3.2ubuntu1) cosmic; urgency=medium
.
* Merge from Debian testing. Remaining changes:
- Generate ddebs from debhelper instead of pkg-create-dbgsym
+ Make debhelper Conflict/Replace pkg-create-dbgsym to force it off.
+ Set DBGSYM_PACKAGE_TYPE to ddeb to get correct debian/files output.
- dh_installchangelogs: Do not install upstream changelog in compat
level 7 and higher to avoid pointlessly bloating installed packages.
.
debhelper (11.3.2) unstable; urgency=medium
.
* dh_installchangelogs: Fix a second regression that made
dh_installchangelogs ignore upstream changelogs in the
source directories. Thanks to gregor herrmann for
reporting the imcomplete fix. (Closes: #899248)
.
debhelper (11.3.1) unstable; urgency=medium
.
* dh_installchangelogs: Fix logic error that made
dh_installchangelogs incorrectly ignore explicitly passed
changelogs. Thanks to Sven Joachim and Rene Engelhard
for reporting the bug. (Closes: #899248)
.
debhelper (11.3) unstable; urgency=medium
.
[ Niels Thykier ]
* Buildsystem.pm: Fix use of undefined variable in certain
error conditions.
* dh_makeshlibs: Support -VUpstream-Version and -VNone as
alternative to passing -V or omitting -V respectively.
* dh_makeshlibs: Make -VUpstream-Version the default in
compat 12 when -V is omitted. (Closes: #896464)
* dh_makeshlibs: Correct handling of an explicit -V when
a source builds multiple library packages and provides
explicit shlibs files for a subset of them. Previously,
the -V option could have been ignored for some of the
packages containing libraries.
* Dh_Lib.pm: Fall back to a regular mv(1) when rename fails
with EXDEV (cross mount point moves). This restores
debhelper's ability to move files between mount points,
which can happen in dh_builddeb has to correct the
extension of a binary package built by dpkg-deb.
Thanks to Evan Krall for the report. (Closes: #897569)
* dh_missing.1: Consistently mention that dh_missing
defaults to --list-missing in compat 12. Thanks to
Robie Basak for spotting the contradicting documentation.
(Closes: #898161)
* dh_compress: Avoid adding a duplicate ".gz" extension on
a symlink if it already has it. This can happen e.g. with
dh_installman recompresses a manpage that was compressed and
had a valid symlink to it. Thanks to Andreas Hasenack for
reporting the bug. (Closes: LP: #1765851)
* debian/control: Depend on dwz for dh_dwz.
* dh_dwz: Generate a per-package multifile by default. This
feature can be disabled by --no-dwz-multifile.
* dh: Run dh_dwz by default in compat 12.
* dh_dwz: Remove warning about the dwz feature being experimental.
* dwz.pm: Ditto.
* dh_installsystemd: Use the basename of the "tmpfiles" config
files. This makes "systemd-tmpfiles --create" search for it
in both /usr/lib/tmpfiles.d and in /etc/tmpfiles.d. With
this change the system administrator can now override the
"tmpfiles" config shipped by the package in
/usr/libtmpfiles.d. Thanks to Nick Groenen and Seyeong Kim
for filing the bug. (Closes: #894510)
* dh_installinit: Ditto.
* dh_installchangelogs: Look for changelog files installed by the
upstream build system in the package build dir (i.e. d/<pkg>/
and *not* debian/tmp!) and use them in preference to the one in the
source package where available. This avoids some cases of duplicated
upstream changelogs. Thanks to Evgeni Golov for the suggestion.
(Closes: #513521)
* dh_md5sums: Stop deleting empty md5sums files as dpkg (now) creates
the empty file on install if absent. Thanks to Rhonda D'Vine for
suggesting the improvement. (Closes: #776853)
* Dh_Lib.pm: Re-organise exports.
* Dh_Lib.pm: Retract "print_and_complex_doit"; the only potential
consumer went with a different code snippet.
* dh_installinitramfs: New tool to install initramfs hook scripts and
handle related maintscripts. Thanks to Evgeni Golov for the
suggestion. (Closes: #491027)
* installinitramfs.pm: New sequence to enable dh_installinitramfs in
compat 11 and earlier.
* dh_installdirs: Add --(no-)create-in-sourcedir option to make
dh_installdirs create directories in the source directory in addition
in the package build directory. Furthermore, dh_installdirs now
accepts --sourcedir to overrule the default source directory (just
like e.g. dh_install). Thanks to Robert Luberda for the suggestion.
(Closes: #816332)
* Buildsystem.pm: Move code from Dh_Buildsystems.pm to Buildsystem.pm
to make the latter independent of the former. This makes it possible
to load Buildsystem.pm without debian/control being present. Thanks
to Andreas Tille for the bug report. (Closes: #897026)
* dh_installinit.1: Fix some incorrect markup in the documentation of
--no-enable.
* makefile.pm: Revert the use of -O/-Oline for make, which helps
debugging what commands time out on the buildds. Thanks to
Adrian Bunk for the report. (Closes: #895196)
* dh_testroot.1: Update R documentation to reflect the current
implementation and not the initial draft. Thanks to Jens Reyer
for reporting the inconsistency. (Closes: #899125)
* d/changelog: Retroactively add Closes for LP bug #1766102 in 11.2
release.
* Dh_Lib.pm: Correct control parser to permit zero or more leading
space after the "Section" field (instead of "exactly one" space).
* python_distutils.pm: Deprecate the python-distutils build system
and mark it as removed in compat 12. Users are recommended to
migrate to the third-party build system called "pybuild". This
deprecation implies that python3 (among other) will not be
supported in the python-distutils build system.
(Closes: #568033, #597105, #597342, #769840, #813686, #898347)
* Dh_Lib.pm: Remove warning for using "debhelper-compat"
build-dependency.
.
[ Dmitry Shachnev ]
* qmake.pm: Use ${DEB_HOST_GNU_TYPE}-qmake wrapper for
cross-compilation. (Closes: #895286)
.
[ Helmut Grohne ]
* cmake: Pass CC/CXX environment variables down during native
compilation as well. (Closes: #897083)
.
[ Chris Lamb ]
* dh_listpackages.1: Document that packages are listed in the
order that they appear in debian/control.
(Closes: #897949)
.
[ Peter Pentchev ]
* Dh_Lib: Permit leading and trailing whitespace around the
debhelper-compat dependency when it is the first or the last
relation listed. (Closes: #897937)
.
[ Jakub Wilk ]
* dh_usrlocal: Fix invalid POD markup.
.
debhelper (11.2.1ubuntu1) cosmic; urgency=medium
.
* Merge from Debian unstable. Remaining changes:
- Generate ddebs from debhelper instead of pkg-create-dbgsym
+ Make debhelper Conflict/Replace pkg-create-dbgsym to force it off.
+ Set DBGSYM_PACKAGE_TYPE to ddeb to get correct debian/files output.
- dh_installchangelogs: Do not install upstream changelog in compat
level 7 and higher to avoid pointlessly bloating installed packages.
.
debhelper (11.2.1) unstable; urgency=medium
.
* Buildsystem.pm: Correctly pass build directory values to
target buildsystems. Thanks to Helmut Grohne, Adrian Bunk
and Tobias Frost for the reports and debugging.
(Closes: #895174, #895181)
* Buildsystems: Avoid choosing a build system for the clean
step if it is not necessary. Previously, debhelper could
choose a "random" build system that would prefer building
in a separate build directory on the basis that the build
directory should be removed. With this, change we only
choose such a build system if there is a build directory
to remove.
.
debhelper (11.2) unstable; urgency=medium
.
[ Niels Thykier ]
* debhelper.7: Add a ~ to the suggested Build-Depends to ensure
backports also work for debhelper with single integer versions.
Thanks to Trent W. Buck for the suggestion. (Closes: #894666)
* makefile.pm: Use -Oline with make. This avoids make mistaking
a target name for a value for -O and should make build time
outs less likely for "long" targets. (Closes: #894573)
* Dh_Lib.pm: Fix bug that make debhelper trip on packages with
the version "0". Thanks to Chris Lamb for reporting the bug
plus debugging the issue. (Closes: #894895, LP: #1766102)
* Buildsystem.pm: Rewrite to support build systems that generate
build files for another build system (without using
inheritance). This enables generator build systems to have
multiple backends.
* cmake.pm: Support ninja as alternative backend (by using the
build system cmake+ninja). Thanks to Kyle Edwards for the
suggestion. (Closes: #895044)
* meson.pm: Rewrite as a generator build system with ninja as
the only backend.
* debhelper.7: Recommend packagers to use "debian/<pkg>.<file>"
over "debian/<file>" in most cases. Thanks to Johannes
Schauer for the suggestion.
* dh_usrlocal: Implement a simple guard for directories that
will likely cause issues in the shell snippets.
* dh_usrlocal: Use the new rules from Debian Policy 4.1.4 to
determine the default ownership and mode for directories.
* d/control: Bump Standards-Versions to 4.1.4. Beyond the
dh_usrlocal change listed above, no changes were required.
.
[ Nicolas Boulenguez ]
* dh_installxfonts: Fix typo that causes a misc:Depends on
non-existing xfont-utils. (Closes: #894835)
* dh_installwm.1: Document --all. (Closes: #895011)
* dh_usrlocal: Fix bug where the generated prerm script generated
by dh_usrlocal could remove a directory directly in /usr/local.
(Closes: #894549)
.
[ Mattia Rizzolo ]
* Lower the version restrictions on dpkg and dpkg-dev. They are not
needed anymore, as R support is not implied anymore, but requires
an environment variable to be passed.
Date: Tue, 25 Jun 2019 10:03:39 +0000
Changed-By: Openstack Ubuntu Testing Bot <openstack-testing-bot at ubuntu.com>
Signed-By: Openstack Ubuntu Testing Bot
Published-By: Corey Bryant <corey.bryant at canonical.com>
More information about the Cloud-archive-changes
mailing list