[ubuntu/cosmic-proposed] ubuntustudio-controls 1.5 (Accepted)

Sun Aug 12 02:31:11 UTC 2018

ubuntustudio-controls (1.5) cosmic; urgency=medium

  [ Len Ovens ]
  * Rewrote so that GUI does not run sudo.
  * Added functionality to Audio settings
  * GUI correctly writes file, jack starts and connects to pulse
    correctly
  * fix not loading values from rc file, zita likes lower buffer size
  * fix jack checkbox, fix extra device reading from rc file
  * Add readme file
  * Changed device name to card,device,sub with some info
  * add etc/ to install so autostart gets installed
  * More GUI tweaks for easier understanding
  * Rewrite autojack as a python daemon
  * Rewrite ubuntustudio-controls to talk to new daemon
  * Add USB device hotplug detect
  * Fix README and remove some comments
  * udev detection should ignore non-usb devices
  * Ubuntu now uses systemd to start ondemand
  * Switched to git
  * Use USB if plugged in at session start
  * session start works the same as if usb plugged later
  * fixed lots of corner cases
  * kill_slave no longer assumes device,0,0
  * added cadence to Conflicts
  * Added soft reconfig many things don't restart jack
  * Bridged devices may have more than 2 channels
  * always rebuild usb master list before showing
  * Stop or Start Jack keeps state over reboot
  * start autojack backend if not running
  * Add missing depends
  * nohup is too slow, removed
  * default internal should be slaved when starting with USB master
  * if ~/.log does not exist yet, create it
  * switched autojack to python3 so we just rely one python3
  * Added man pages

  [ Simon Quigley ]
  * Run wrap-and-sort.
  * Update Standards-version to 4.2.0, no changes needed.
  * Bump debhelper compat to 11, no changes needed.
  * Modernize the copyright file.
  * Make Vcs-* and Homepage current.
  * Fix the description.

  [ Ross Gammon ]
  * Drop duplicate "Section" field in debian/control
  * New version ready for upload (LP: #1785418)

Date: Sat, 11 Aug 2018 21:30:07 -0500
Changed-By: Simon Quigley <tsimonq2 at ubuntu.com>
Maintainer: Ubuntu Studio Development Team <ubuntu-studio-devel at lists.ubuntu.com>
https://launchpad.net/ubuntu/+source/ubuntustudio-controls/1.5
-------------- next part --------------
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA512

Format: 1.8
Date: Sat, 11 Aug 2018 21:30:07 -0500
Source: ubuntustudio-controls
Binary: ubuntustudio-controls
Architecture: source
Version: 1.5
Distribution: cosmic
Urgency: medium
Maintainer: Ubuntu Studio Development Team <ubuntu-studio-devel at lists.ubuntu.com>
Changed-By: Simon Quigley <tsimonq2 at ubuntu.com>
Description:
 ubuntustudio-controls - Ubuntu Studio Controls
Launchpad-Bugs-Fixed: 1785418
Changes:
 ubuntustudio-controls (1.5) cosmic; urgency=medium
 .
   [ Len Ovens ]
   * Rewrote so that GUI does not run sudo.
   * Added functionality to Audio settings
   * GUI correctly writes file, jack starts and connects to pulse
     correctly
   * fix not loading values from rc file, zita likes lower buffer size
   * fix jack checkbox, fix extra device reading from rc file
   * Add readme file
   * Changed device name to card,device,sub with some info
   * add etc/ to install so autostart gets installed
   * More GUI tweaks for easier understanding
   * Rewrite autojack as a python daemon
   * Rewrite ubuntustudio-controls to talk to new daemon
   * Add USB device hotplug detect
   * Fix README and remove some comments
   * udev detection should ignore non-usb devices
   * Ubuntu now uses systemd to start ondemand
   * Switched to git
   * Use USB if plugged in at session start
   * session start works the same as if usb plugged later
   * fixed lots of corner cases
   * kill_slave no longer assumes device,0,0
   * added cadence to Conflicts
   * Added soft reconfig many things don't restart jack
   * Bridged devices may have more than 2 channels
   * always rebuild usb master list before showing
   * Stop or Start Jack keeps state over reboot
   * start autojack backend if not running
   * Add missing depends
   * nohup is too slow, removed
   * default internal should be slaved when starting with USB master
   * if ~/.log does not exist yet, create it
   * switched autojack to python3 so we just rely one python3
   * Added man pages
 .
   [ Simon Quigley ]
   * Run wrap-and-sort.
   * Update Standards-version to 4.2.0, no changes needed.
   * Bump debhelper compat to 11, no changes needed.
   * Modernize the copyright file.
   * Make Vcs-* and Homepage current.
   * Fix the description.
 .
   [ Ross Gammon ]
   * Drop duplicate "Section" field in debian/control
   * New version ready for upload (LP: #1785418)
Checksums-Sha1:
 91c95761f7dd4f4d3770bc2155423de140a747fe 1672 ubuntustudio-controls_1.5.dsc
 f7afc9e0092942864937d523501fa97d743a6f08 64124 ubuntustudio-controls_1.5.tar.xz
 c90373092e7fda6f5ce8193f419011fdb7af1401 6718 ubuntustudio-controls_1.5_source.buildinfo
Checksums-Sha256:
 0a3cc5238a43096a1612efa079b6fdea5838ed9221fcbb29c40259bae86113ec 1672 ubuntustudio-controls_1.5.dsc
 f392af9d93b0bea092686e02842c944152eb09e4e69de1a5106cf4a903154b77 64124 ubuntustudio-controls_1.5.tar.xz
 85c923f9f2bbe64a37012d0a080dae05512138c83163c06f9bccfdbc3d838ebc 6718 ubuntustudio-controls_1.5_source.buildinfo
Files:
 8bb125d20af3fb1fcc6cb72b90950982 1672 admin optional ubuntustudio-controls_1.5.dsc
 fffbbee810a598da9319e7f48e575e27 64124 admin optional ubuntustudio-controls_1.5.tar.xz
 24d862b51eb764a776b8b37c5c6cee6a 6718 admin optional ubuntustudio-controls_1.5_source.buildinfo

-----BEGIN PGP SIGNATURE-----
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=cuOa
-----END PGP SIGNATURE-----