[Bug 43951] Re: [Bug 43951] Re: Background displays, but gnome panel doesn't start
Justin Butterfield
jbutterfield at law.harvard.edu
Wed May 10 20:45:06 UTC 2006
dmesg:
[4294667.296000] Linux version 2.6.15-21-386 (buildd at rothera) (gcc
version 4.0.3 (Ubuntu 4.0.3-1ubuntu5)) #1 PREEMPT Fri Apr 21 16:43:33
UTC 2006
[4294667.296000] BIOS-provided physical RAM map:
[4294667.296000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[4294667.296000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[4294667.296000] BIOS-e820: 00000000000d0000 - 00000000000d4000 (reserved)
[4294667.296000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
[4294667.296000] BIOS-e820: 0000000000100000 - 000000003ff70000 (usable)
[4294667.296000] BIOS-e820: 000000003ff70000 - 000000003ff7b000 (ACPI data)
[4294667.296000] BIOS-e820: 000000003ff7b000 - 000000003ff80000 (ACPI NVS)
[4294667.296000] BIOS-e820: 000000003ff80000 - 0000000040000000 (reserved)
[4294667.296000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[4294667.296000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[4294667.296000] BIOS-e820: 00000000ff800000 - 00000000ffc00000 (reserved)
[4294667.296000] BIOS-e820: 00000000fffffc00 - 0000000100000000 (reserved)
[4294667.296000] 127MB HIGHMEM available.
[4294667.296000] 896MB LOWMEM available.
[4294667.296000] found SMP MP-table at 000f6670
[4294667.296000] On node 0 totalpages: 262000
[4294667.296000] DMA zone: 4096 pages, LIFO batch:0
[4294667.296000] DMA32 zone: 0 pages, LIFO batch:0
[4294667.296000] Normal zone: 225280 pages, LIFO batch:31
[4294667.296000] HighMem zone: 32624 pages, LIFO batch:7
[4294667.296000] DMI present.
[4294667.296000] ACPI: RSDP (v000 PTLTD
) @ 0x000f66e0
[4294667.296000] ACPI: RSDT (v001 PTLTD RSDT 0x06040000 LTP
0x00000000) @ 0x3ff76ae3
[4294667.296000] ACPI: FADT (v001 Clevo SPDG 0x06040000 PTL
0x00000003) @ 0x3ff7aecf
[4294667.296000] ACPI: MADT (v001 PTLTD APIC 0x06040000 LTP
0x00000000) @ 0x3ff7af43
[4294667.296000] ACPI: BOOT (v001 PTLTD $SBFTBL$ 0x06040000 LTP
0x00000001) @ 0x3ff7afa1
[4294667.296000] ACPI: SSDT (v001 PTLTD ACPIHT 0x06040000 LTP
0x00000001) @ 0x3ff7afc9
[4294667.296000] ACPI: DSDT (v001 INTEL SPRGDLEG 0x06040000 MSFT
0x0100000e) @ 0x00000000
[4294667.296000] ACPI: PM-Timer IO Port: 0x1008
[4294667.296000] ACPI: Local APIC address 0xfee00000
[4294667.296000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[4294667.296000] Processor #0 15:2 APIC version 20
[4294667.296000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[4294667.296000] Processor #1 15:2 APIC version 20
[4294667.296000] WARNING: NR_CPUS limit of 1 reached. Processor ignored.
[4294667.296000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[4294667.296000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[4294667.296000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[4294667.296000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000,
GSI 0-23
[4294667.296000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[4294667.296000] ACPI: IRQ9 used by override.
[4294667.296000] Enabling APIC mode: Flat. Using 1 I/O APICs
[4294667.296000] Using ACPI (MADT) for SMP configuration information
[4294667.296000] Allocating PCI resources starting at 50000000 (gap:
40000000:bec00000)
[4294667.296000] Built 1 zonelists
[4294667.296000] Kernel command line: BOOT_IMAGE=/install/vmlinuz
boot=casper initrd=/install/initrd.gz ramdisk_size=1048576 root=/dev/ram
rw quiet splash --
[4294667.296000] mapped APIC to ffffd000 (fee00000)
[4294667.296000] mapped IOAPIC to ffffc000 (fec00000)
[4294667.296000] Initializing CPU#0
[4294667.296000] PID hash table entries: 4096 (order: 12, 65536 bytes)
[4294667.296000] Detected 3401.032 MHz processor.
[4294667.296000] Using pmtmr for high-res timesource
[4294667.296000] Console: colour VGA+ 80x25
[4294671.465000] Dentry cache hash table entries: 131072 (order: 7,
524288 bytes)
[4294671.465000] Inode-cache hash table entries: 65536 (order: 6, 262144
bytes)
[4294671.485000] Memory: 1028184k/1048000k available (1974k kernel code,
19112k reserved, 604k data, 288k init, 130496k highmem)
[4294671.485000] Checking if this processor honours the WP bit even in
supervisor mode... Ok.
[4294671.545000] Calibrating delay using timer specific routine..
6803.91 BogoMIPS (lpj=3401956)
[4294671.545000] Security Framework v1.0.0 initialized
[4294671.545000] SELinux: Disabled at boot.
[4294671.545000] Mount-cache hash table entries: 512
[4294671.545000] CPU: After generic identify, caps: bfebfbff 00000000
00000000 00000000 00004400 00000000 00000000
[4294671.545000] CPU: After vendor identify, caps: bfebfbff 00000000
00000000 00000000 00004400 00000000 00000000
[4294671.545000] CPU: Trace cache: 12K uops, L1 D cache: 8K
[4294671.545000] CPU: L2 cache: 512K
[4294671.545000] CPU: After all inits, caps: bfebfbff 00000000 00000000
00000080 00004400 00000000 00000000
[4294671.545000] mtrr: v2.0 (20020519)
[4294671.545000] CPU: Intel(R) Pentium(R) 4 CPU 3.40GHz stepping 09
[4294671.545000] Enabling fast FPU save and restore... done.
[4294671.545000] Enabling unmasked SIMD FPU exception support... done.
[4294671.545000] Checking 'hlt' instruction... OK.
[4294671.549000] checking if image is initramfs... it is
[4294671.958000] Freeing initrd memory: 6798k freed
[4294671.964000] ACPI: Looking for DSDT ... not found!
[4294671.967000] ENABLING IO-APIC IRQs
[4294671.967000] ..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
[4294672.078000] NET: Registered protocol family 16
[4294672.078000] EISA bus registered
[4294672.078000] ACPI: bus type pci registered
[4294672.078000] PCI: PCI BIOS revision 2.10 entry at 0xfd9b2, last bus=3
[4294672.078000] PCI: Using configuration type 1
[4294672.079000] ACPI: Subsystem revision 20051216
[4294672.080000] ACPI: Interpreter enabled
[4294672.080000] ACPI: Using IOAPIC for interrupt routing
[4294672.081000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[4294672.081000] PCI: Probing PCI hardware (bus 00)
[4294672.085000] PCI quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO
[4294672.085000] PCI quirk: region 1180-11bf claimed by ICH4 GPIO
[4294672.085000] PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
[4294672.085000] Boot video device is 0000:01:00.0
[4294672.085000] PCI: Transparent bridge - 0000:00:1e.0
[4294672.085000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[4294672.087000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[4294672.087000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[4294672.088000] ACPI: PCI Interrupt Link [LNKA] (IRQs *11)
[4294672.088000] ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
[4294672.089000] ACPI: PCI Interrupt Link [LNKC] (IRQs *5)
[4294672.089000] ACPI: PCI Interrupt Link [LNKD] (IRQs *11)
[4294672.089000] ACPI: PCI Interrupt Link [LNKE] (IRQs 5) *0, disabled.
[4294672.089000] ACPI: PCI Interrupt Link [LNKF] (IRQs *11)
[4294672.089000] ACPI: PCI Interrupt Link [LNKG] (IRQs *5)
[4294672.089000] ACPI: PCI Interrupt Link [LNKH] (IRQs *5)
[4294672.091000] ACPI: Embedded Controller [EC] (gpe 28) interrupt mode.
[4294672.092000] Linux Plug and Play Support v0.97 (c) Adam Belay
[4294672.092000] pnp: PnP ACPI init
[4294672.096000] pnp: PnP ACPI: found 11 devices
[4294672.096000] PnPBIOS: Disabled by ACPI PNP
[4294672.096000] PCI: Using ACPI for IRQ routing
[4294672.096000] PCI: If a device doesn't work, try "pci=routeirq". If
it helps, post a report
[4294672.102000] PCI: Bridge: 0000:00:01.0
[4294672.102000] IO window: 3000-3fff
[4294672.102000] MEM window: e8100000-e81fffff
[4294672.102000] PREFETCH window: f0000000-f7ffffff
[4294672.102000] PCI: Bus 4, cardbus bridge: 0000:03:00.0
[4294672.102000] IO window: 00004400-000044ff
[4294672.102000] IO window: 00004800-000048ff
[4294672.102000] PREFETCH window: 50000000-51ffffff
[4294672.102000] MEM window: 54000000-55ffffff
[4294672.102000] PCI: Bridge: 0000:00:1e.0
[4294672.102000] IO window: 4000-4fff
[4294672.102000] MEM window: e8200000-e82fffff
[4294672.102000] PREFETCH window: 50000000-52ffffff
[4294672.102000] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[4294672.102000] PCI: Enabling device 0000:03:00.0 (0000 -> 0003)
[4294672.102000] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 16 (level,
low) -> IRQ 177
[4294672.102000] Simple Boot Flag at 0x37 set to 0x1
[4294672.103000] audit: initializing netlink socket (disabled)
[4294672.103000] audit(1147278119.102:1): initialized
[4294672.103000] highmem bounce pool size: 64 pages
[4294672.103000] VFS: Disk quotas dquot_6.5.1
[4294672.103000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[4294672.103000] Initializing Cryptographic API
[4294672.103000] io scheduler noop registered
[4294672.103000] io scheduler anticipatory registered
[4294672.103000] io scheduler deadline registered
[4294672.103000] io scheduler cfq registered
[4294672.103000] isapnp: Scanning for PnP cards...
[4294672.460000] isapnp: No Plug & Play device found
[4294672.472000] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at
0x60,0x64 irq 1,12
[4294672.473000] i8042.c: Detected active multiplexing controller, rev 1.1.
[4294672.474000] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[4294672.474000] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[4294672.475000] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[4294672.475000] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[4294672.475000] serio: i8042 KBD port at 0x60,0x64 irq 1
[4294672.475000] Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports,
IRQ sharing enabled
[4294672.475000] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 8250
[4294672.477000] ACPI: PCI Interrupt 0000:00:1f.6[B] -> GSI 17 (level,
low) -> IRQ 185
[4294672.477000] ACPI: PCI interrupt for device 0000:00:1f.6 disabled
[4294672.477000] RAMDISK driver initialized: 16 RAM disks of 1048576K
size 1024 blocksize
[4294672.477000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[4294672.477000] ide: Assuming 33MHz system bus speed for PIO modes;
override with idebus=xx
[4294672.477000] mice: PS/2 mouse device common for all mice
[4294672.477000] EISA: Probing bus 0 at eisa.0
[4294672.477000] Cannot allocate resource for EISA slot 1
[4294672.478000] Cannot allocate resource for EISA slot 2
[4294672.478000] Cannot allocate resource for EISA slot 3
[4294672.478000] Cannot allocate resource for EISA slot 4
[4294672.478000] EISA: Detected 0 cards.
[4294672.478000] NET: Registered protocol family 2
[4294672.488000] IP route cache hash table entries: 65536 (order: 6,
262144 bytes)
[4294672.488000] TCP established hash table entries: 262144 (order: 8,
1048576 bytes)
[4294672.488000] TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
[4294672.488000] TCP: Hash tables configured (established 262144 bind 65536)
[4294672.488000] TCP reno registered
[4294672.489000] TCP bic registered
[4294672.489000] NET: Registered protocol family 1
[4294672.489000] NET: Registered protocol family 8
[4294672.489000] NET: Registered protocol family 20
[4294672.489000] Using IPI Shortcut mode
[4294672.489000] ACPI wakeup devices:
[4294672.489000] LID SLPB PWRB CRD0 LANC AC97
[4294672.489000] ACPI: (supports S0 S3 S4 S5)
[4294672.489000] Freeing unused kernel memory: 288k freed
[4294672.542000] vga16fb: initializing
[4294672.542000] vga16fb: mapped to 0xc00a0000
[4294672.628000] input: AT Translated Set 2 keyboard as /class/input/input0
[4294672.650000] Console: switching to colour frame buffer device 80x25
[4294672.650000] fb0: VGA16 VGA frame buffer device
[4294673.809000] Capability LSM initialized
[4294673.838000] ACPI: Processor [CPU0] (supports 8 throttling states)
[4294673.840000] ACPI: Thermal Zone [THM0] (53 C)
[4294674.296000] ICH5: IDE controller at PCI slot 0000:00:1f.1
[4294674.296000] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level,
low) -> IRQ 193
[4294674.296000] ICH5: chipset revision 2
[4294674.296000] ICH5: not 100% native mode: will probe irqs later
[4294674.296000] ide0: BM-DMA at 0x2060-0x2067, BIOS settings:
hda:DMA, hdb:pio
[4294674.296000] ide1: BM-DMA at 0x2068-0x206f, BIOS settings:
hdc:DMA, hdd:DMA
[4294674.296000] Probing IDE interface ide0...
[4294674.560000] hda: HTS726060M9AT00, ATA DISK drive
[4294675.172000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[4294675.538000] Probing IDE interface ide1...
[4294676.210000] hdc: DVD+RW RW8165, ATAPI CD/DVD-ROM drive
[4294676.465000] hdd: HTS726060M9AT00, ATA DISK drive
[4294676.516000] ide1 at 0x170-0x177,0x376 on irq 15
[4294676.896000] hda: max request size: 1024KiB
[4294676.906000] hda: 117210240 sectors (60011 MB) w/7877KiB Cache,
CHS=16383/255/63, UDMA(100)
[4294676.906000] hda: cache flushes supported
[4294676.906000] hda: hda1
[4294676.928000] hdd: max request size: 1024KiB
[4294676.928000] hdd: 117210240 sectors (60011 MB) w/7877KiB Cache,
CHS=16383/255/63, UDMA(33)
[4294676.929000] hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 8192kB Cache,
UDMA(33)
[4294676.929000] Uniform CD-ROM driver Revision: 3.20
[4294676.929000] hdd: cache flushes supported
[4294676.929000] hdd: hdd1 hdd2 hdd4 < hdd5 >
[4294677.036000] hdd2: <bsd: hdd6 hdd7 hdd8 hdd9 hdd10 >
[4294677.606000] usbcore: registered new driver usbfs
[4294677.607000] usbcore: registered new driver hub
[4294677.608000] USB Universal Host Controller Interface driver v2.3
[4294677.608000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level,
low) -> IRQ 177
[4294677.608000] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[4294677.608000] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[4294677.609000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned
bus number 1
[4294677.609000] uhci_hcd 0000:00:1d.0: irq 177, io base 0x00001cc0
[4294677.610000] hub 1-0:1.0: USB hub found
[4294677.610000] hub 1-0:1.0: 2 ports detected
[4294677.664000] ieee1394: Initialized config rom entry `ip1394'
[4294677.711000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level,
low) -> IRQ 201
[4294677.711000] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[4294677.711000] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[4294677.711000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned
bus number 2
[4294677.711000] uhci_hcd 0000:00:1d.1: irq 201, io base 0x00001ce0
[4294677.711000] hub 2-0:1.0: USB hub found
[4294677.711000] hub 2-0:1.0: 2 ports detected
[4294677.812000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level,
low) -> IRQ 193
[4294677.812000] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[4294677.812000] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[4294677.812000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned
bus number 3
[4294677.812000] uhci_hcd 0000:00:1d.2: irq 193, io base 0x00002000
[4294677.812000] hub 3-0:1.0: USB hub found
[4294677.812000] hub 3-0:1.0: 2 ports detected
[4294677.913000] ACPI: PCI Interrupt 0000:00:1d.3[A] -> GSI 16 (level,
low) -> IRQ 177
[4294677.913000] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[4294677.913000] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[4294677.913000] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned
bus number 4
[4294677.913000] uhci_hcd 0000:00:1d.3: irq 177, io base 0x00002020
[4294677.913000] hub 4-0:1.0: USB hub found
[4294677.913000] hub 4-0:1.0: 2 ports detected
[4294677.917000] usb 1-1: new low speed USB device using uhci_hcd and
address 2
[4294678.016000] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level,
low) -> IRQ 209
[4294678.016000] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[4294678.016000] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[4294678.016000] ehci_hcd 0000:00:1d.7: debug port 1
[4294678.016000] PCI: cache line size of 128 is not supported by device
0000:00:1d.7
[4294678.016000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned
bus number 5
[4294678.016000] ehci_hcd 0000:00:1d.7: irq 209, io mem 0xe8000000
[4294678.020000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00,
driver 10 Dec 2004
[4294678.020000] hub 5-0:1.0: USB hub found
[4294678.020000] hub 5-0:1.0: 8 ports detected
[4294678.121000] ohci1394: $Rev: 1313 $ Ben Collins <bcollins at debian.org>
[4294678.121000] ACPI: PCI Interrupt 0000:03:01.0[A] -> GSI 21 (level,
low) -> IRQ 217
[4294678.171000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[217]
MMIO=[e8214000-e82147ff] Max Packet=[2048]
[4294678.433000] usb 1-1: device not accepting address 2, error -71
[4294679.104000] usb 1-1: new low speed USB device using uhci_hcd and
address 4
[4294679.259000] ISO 9660 Extensions: Microsoft Joliet Level 3
[4294679.296000] ISO 9660 Extensions: RRIP_1991A
[4294679.328000] loop: loaded (max 8 devices)
[4294679.427000] ieee1394: Host added: ID:BUS[0-00:1023]
GUID[0090f50000234d41]
[4294679.474000] usb 3-1: new full speed USB device using uhci_hcd and
address 2
[4294679.605000] usbcore: registered new driver hiddev
[4294679.627000] input: B16_b_02 USB-PS/2 Optical Mouse as
/class/input/input1
[4294679.627000] input: USB HID v1.10 Mouse [B16_b_02 USB-PS/2 Optical
Mouse] on usb-0000:00:1d.0-1
[4294679.627000] usbcore: registered new driver usbhid
[4294679.627000] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[4294679.649000] Registering unionfs 1.1.2
[4294679.757000] squashfs: version 3.0prerelease (2006/1/24) Phillip Lougher
[4294718.186000] r8169 Gigabit Ethernet driver 2.2LK loaded
[4294718.186000] ACPI: PCI Interrupt 0000:03:03.0[A] -> GSI 22 (level,
low) -> IRQ 225
[4294718.187000] eth0: Identified chip type is 'RTL8169s/8110s'.
[4294718.187000] eth0: RTL8169 at 0xf89dc800, 00:90:f5:23:4d:41, IRQ 225
[4294729.082000] ts: Compaq touchscreen protocol output
[4294730.199000] Linux agpgart interface v0.101 (c) Dave Jones
[4294730.346000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[4294730.626000] r8169: eth0: link up
[4294730.882000] agpgart: Detected an Intel 865 Chipset.
[4294730.887000] agpgart: AGP aperture is 128M @ 0xd0000000
[4294730.930000] shpchp: Standard Hot Plug PCI Controller Driver
version: 0.4
[4294731.292000] hw_random hardware driver 1.0.0 loaded
[4294731.644000] irda_init()
[4294731.644000] NET: Registered protocol family 23
[4294731.857000] Real Time Clock Driver v1.12
[4294731.859000] ath_hal: module license 'Proprietary' taints kernel.
[4294731.859000] ath_hal: 0.9.14.9 (AR5210, AR5211, AR5212, RF5111,
RF5112, RF2413)
[4294732.040000] FDC 0 is a National Semiconductor PC87306
[4294732.423000] wlan: 0.8.6.0 (EXPERIMENTAL)
[4294732.425000] ath_rate_sample: 1.2
[4294732.430000] ath_pci: 0.9.6.0 (EXPERIMENTAL)
[4294732.430000] ACPI: PCI Interrupt 0000:03:04.0[A] -> GSI 19 (level,
low) -> IRQ 201
[4294732.517000] NET: Registered protocol family 17
[4294732.653000] Build date: Apr 23 2006
[4294732.653000] Debugging version (IEEE80211)
[4294732.653000] ath0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
[4294732.653000] ath0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps
12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
[4294732.653000] ath0: turboG rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps
36Mbps 48Mbps 54Mbps
[4294732.653000] ath0: H/W encryption support: WEP AES AES_CCM TKIP
[4294732.653000] ath0: mac 5.6 phy 4.1 radio 4.6
[4294732.653000] ath0: Use hw queue 1 for WME_AC_BE traffic
[4294732.653000] ath0: Use hw queue 0 for WME_AC_BK traffic
[4294732.653000] ath0: Use hw queue 2 for WME_AC_VI traffic
[4294732.653000] ath0: Use hw queue 3 for WME_AC_VO traffic
[4294732.653000] ath0: Use hw queue 8 for CAB traffic
[4294732.653000] ath0: Use hw queue 9 for beacons
[4294732.653000] Debugging version (ATH)
[4294732.653000] ath0: Atheros 5212: mem=0xe8200000, irq=201
[4294732.671000] parport: PnPBIOS parport detected.
[4294732.671000] parport0: PC-style at 0x378 (0x778), irq 7, dma 1
[PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[4294732.817000] input: PC Speaker as /class/input/input2
[4294732.906000] Synaptics Touchpad, model: 1, fw: 5.6, id: 0x9244b1,
caps: 0x80471b/0x0
[4294732.942000] input: SynPS/2 Synaptics TouchPad as /class/input/input3
[4294733.790000] nsc_ircc_pnp_probe() : Found cfg_base 0x000 ; firbase
0x3F8 ; irq 3 ; dma 3.
[4294733.790000] nsc-ircc, Found chip at base=0x000
[4294733.790000] nsc-ircc, driver loaded (Dag Brattli)
[4294733.791000] IrDA: Registered device irda0
[4294733.791000] nsc-ircc, Found dongle: HP HSDL-1100/HSDL-2100
[4294733.791000] nsc-ircc, Found chip at base=0x02e
[4294733.791000] nsc-ircc, driver loaded (Dag Brattli)
[4294733.791000] nsc_ircc_open(), can't get iobase of 0x3f8
[4294734.027000] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 16 (level,
low) -> IRQ 177
[4294734.027000] Yenta: CardBus bridge found at 0000:03:00.0 [1558:0500]
[4294734.027000] Yenta: Using CSCINT to route CSC interrupts to PCI
[4294734.027000] Yenta: Routing CardBus interrupts to PCI
[4294734.027000] Yenta TI: socket 0000:03:00.0, mfunc 0x00001002, devctl
0x44
[4294734.272000] Yenta: ISA IRQ mask 0x0810, PCI irq 177
[4294734.272000] Socket status: 30000006
[4294734.272000] pcmcia: parent PCI bridge I/O window: 0x4000 - 0x4fff
[4294734.272000] cs: IO port probe 0x4000-0x4fff: clean.
[4294734.272000] pcmcia: parent PCI bridge Memory window: 0xe8200000 -
0xe82fffff
[4294734.272000] pcmcia: parent PCI bridge Memory window: 0x50000000 -
0x52ffffff
[4294734.487000] drivers/usb/class/usblp.c: usblp0: USB Bidirectional
printer dev 2 if 0 alt 0 proto 2 vid 0x04E8 pid 0x324C
[4294734.487000] usbcore: registered new driver usblp
[4294734.487000] drivers/usb/class/usblp.c: v0.13: USB Printer Device
Class driver
[4294734.853000] ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level,
low) -> IRQ 185
[4294734.853000] PCI: Setting latency timer of device 0000:00:1f.5 to 64
[4294734.981000] cs: IO port probe 0x100-0x3af: clean.
[4294734.982000] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
[4294734.983000] cs: IO port probe 0x820-0x8ff: clean.
[4294734.984000] cs: IO port probe 0xc00-0xcf7: clean.
[4294734.984000] cs: IO port probe 0xa00-0xaff: clean.
[4294735.664000] intel8x0_measure_ac97_clock: measured 50433 usecs
[4294735.664000] intel8x0: clocking to 48000
[4294736.899000] Adding 2040212k swap on /dev/hdd5. Priority:-1
extents:1 across:2040212k
[4294737.136000] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
[4294737.136000] md: bitmap version 4.39
[4294737.766000] device-mapper: 4.4.0-ioctl (2005-01-12) initialised:
dm-devel at redhat.com
[4294746.436000] NET: Registered protocol family 10
[4294746.436000] lo: Disabled Privacy Extensions
[4294746.436000] IPv6 over IPv4 tunneling driver
[4294756.347000] ACPI: AC Adapter [ADP0] (on-line)
[4294756.461000] ath0: no IPv6 routers present
[4294756.489000] ACPI: Battery Slot [BAT0] (battery present)
[4294756.489000] ACPI: Battery Slot [BAT1] (battery absent)
[4294756.533000] ACPI: Lid Switch [LID]
[4294756.533000] ACPI: Sleep Button (CM) [SLPB]
[4294756.533000] ACPI: Power Button (CM) [PWRB]
[4294756.608000] ibm_acpi: ec object not found
[4294756.626000] pcc_acpi: loading...
[4294756.886000] eth0: no IPv6 routers present
[4294771.651000] [drm] Initialized drm 1.0.0 20040925
[4294771.906000] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 23 (level,
low) -> IRQ 209
[4294771.906000] [drm] Initialized radeon 1.19.0 20050911 on minor 0:
[4294772.991000] agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
[4294772.991000] agpgart: Putting AGP V3 device at 0000:00:00.0 into 4x mode
[4294772.991000] agpgart: Putting AGP V3 device at 0000:01:00.0 into 4x mode
[4294773.213000] [drm] Loading R300 Microcode
[4294773.537000] irq 185: nobody cared (try booting with the "irqpoll"
option)
[4294773.537000] [<c013ee42>] __report_bad_irq+0x22/0x80
[4294773.537000] [<c013ef38>] note_interrupt+0x68/0xc0
[4294773.537000] [<c013e7fc>] __do_IRQ+0xbc/0xe0
[4294773.537000] [<c010597a>] do_IRQ+0x1a/0x30
[4294773.537000] [<c01040ea>] common_interrupt+0x1a/0x20
[4294773.537000] [<c010106a>] default_idle+0x3a/0x70
[4294773.537000] [<c01010dc>] cpu_idle+0x1c/0x60
[4294773.537000] [<c03887c6>] start_kernel+0x176/0x1d0
[4294773.537000] handlers:
[4294773.537000] [<f8bc2800>] (snd_intel8x0_interrupt+0x0/0x2a0
[snd_intel8x0])
[4294773.537000] Disabling IRQ #185
[4294780.187000] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[4294780.187000] apm: overridden by ACPI.
[4294795.834000] hdc: drive_cmd: status=0x51 { DriveReady SeekComplete
Error }
[4294795.834000] hdc: drive_cmd: error=0x04 { AbortedCommand }
[4294795.834000] ide: failed opcode was: 0xec
[4294796.394000] hdc: drive_cmd: status=0x51 { DriveReady SeekComplete
Error }
[4294796.394000] hdc: drive_cmd: error=0x04 { AbortedCommand }
[4294796.394000] ide: failed opcode was: 0xec
[4294797.628000] Bluetooth: Core ver 2.8
[4294797.628000] NET: Registered protocol family 31
[4294797.628000] Bluetooth: HCI device and connection manager initialized
[4294797.628000] Bluetooth: HCI socket layer initialized
[4294797.839000] Bluetooth: L2CAP ver 2.8
[4294797.839000] Bluetooth: L2CAP socket layer initialized
[4294798.264000] Bluetooth: RFCOMM socket layer initialized
[4294798.264000] Bluetooth: RFCOMM TTY layer initialized
[4294798.264000] Bluetooth: RFCOMM ver 1.7
--
Background displays, but gnome panel doesn't start
https://launchpad.net/bugs/43951
More information about the desktop-bugs
mailing list