No subject

[ranil at senaratne.dk]

We are a internet cafe, in Denmark, based on volunteer work. we are
experimenting, with edubuntu for our internet pc's. We had several
problems wit the network, i think there is some conflict with our hardware
router, which have the ip 192.168.0.254.
So we decided to install a server an try it on one thin client, without
internet access. we made a default install with the settings suggested at
edubuntu.org
the install went fine and we connected the switch and the thin client. We
booted the thin client and it got its IP from the server and i could see
it was booting from the server.
I was under the impression that i should get a login screen, but all that
happened was this
"
PXELINUX 3.11 Debian-2006-03-16 Copyright (C) 1994-2005 H.Peter Anvin
UNDI data segment at:  	00098E40
UNDI data size:		4D30
UNDI code segment at:	0009DB70
UNDI code segment size:	1F40
PXE entry point found (we hope) at 9DB7:0106
My IP adress seems C0A800FA 192.168.0.250
ip=192.168.0.250:192.168.0.254:192.168.0.1:255.255.255.0
TFTP prefix: /ltsp/
Trying to load : pxelinux.cfg/01-00-02-b3-4c-f3-1f
Trying to load : pxelinux.cfg/C0A800FA
Trying to load : pxelinux.cfg/C0A800F
Trying to load : pxelinux.cfg/C0A800
Trying to load : pxelinux.cfg/C0A80
Trying to load : pxelinux.cfg/C0A8
Trying to load : pxelinux.cfg/C0A
Trying to load : pxelinux.cfg/C0
Trying to load : pxelinux.cfg/C
Trying to load : pxelinux.cfg/default
Loading vmlinuz.........................................................
Loading
initrd.img.................................................................................................................
Ready.
"

Any suggestions what to do next or whats wrong ????

/ Ranil Senaratne, Denmark