No login after boot

[ranil at senaratne.dk]

I posted this earlier, but since i didnt reply to it properly i will try and
post it again, sorry for the inconvenience

> We are a internet cafe, in Denmark, based on volunteer work. we are
> experimenting, with edubuntu for our internet pc's. We had several
> problems wit the network, i think there is some conflict with our hardware
> router, which have the ip 192.168.0.254.
> So we decided to install a server an try it on one thin client, without
> internet access. we made a default install with the settings suggested at
> edubuntu.org
> the install went fine and we connected the switch and the thin client. We
> booted the thin client and it got its IP from the server and i could see
> it was booting from the server.
> I was under the impression that i should get a login screen, but all that
> happened was this
> "
> PXELINUX 3.11 Debian-2006-03-16 Copyright (C) 1994-2005 H.Peter Anvin
> UNDI data segment at:          00098E40
> UNDI data size:                4D30
> UNDI code segment at:        0009DB70
> UNDI code segment size:        1F40
> PXE entry point found (we hope) at 9DB7:0106
> My IP adress seems C0A800FA 192.168.0.250
> ip=192.168.0.250:192.168.0.254:192.168.0.1:255.255.255.0
> TFTP prefix: /ltsp/
> Trying to load : pxelinux.cfg/01-00-02-b3-4c-f3-1f
> Trying to load : pxelinux.cfg/C0A800FA
> Trying to load : pxelinux.cfg/C0A800F
> Trying to load : pxelinux.cfg/C0A800
> Trying to load : pxelinux.cfg/C0A80
> Trying to load : pxelinux.cfg/C0A8
> Trying to load : pxelinux.cfg/C0A
> Trying to load : pxelinux.cfg/C0
> Trying to load : pxelinux.cfg/C
> Trying to load : pxelinux.cfg/default
> Loading vmlinuz.........................................................
> Loading
> initrd.img.................................................................................................................
> Ready.
> "
>
> Any suggestions what to do next or whats wrong ????
>
> / Ranil Senaratne, Denmark
>