[Bug 575053] Re: aoetools mount problem during boot after upgrade to server 10.04

[Stephan Fabel]

>From /etc/fstab:

# CORAID STORAGE
/dev/etherd/e64.1			  /mnt/storage	  ext4	  defaults,_netdev,nobarrier	  0	  0
/dev/etherd/e64.2			  /srv/backup	          xfs	         defaults,_netdev,nobarrier	  0	  0
/dev/etherd/e64.3 			  /srv/coefiles	  xfs	        defaults,_netdev,nobarrier	  0	  0

/etc/defaults/aoetools only specifies eth1 as the interface, nothing
else.

/etc/network/interfaces looks like this for eth1:

auto eth1
iface eth1 inet manual
      pre-up ifconfig $IFACE up
      post-down ifconfig $IFACE down

-- 
You received this bug notification because you are a member of Ubuntu
Foundations Bugs, which is subscribed to mountall in Ubuntu.
https://bugs.launchpad.net/bugs/575053

Title:
  aoetools mount problem during boot after upgrade to server 10.04

Status in “mountall” package in Ubuntu:
  Incomplete

Bug description:
  Binary package hint: mountall

  After upgrade from server 9.10 to server 10.04, previously working
  mount of Coraid SR1521 Etherdrive is causing server wait for user
  input (press S to skip, or M ...). The message shown is that the drive
  is not ready and not possible to mount to its mount point /mnt/coraid.

  Pressing S skips mounting, but after loging into system the etherdrive
  is active and mounted.

  /etc/fstab setting for mount:

  /dev/etherd/e1.1        /mnt/coraid     ext4    rw      0       0

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/mountall/+bug/575053/+subscriptions