[Bug 997978] Re: KVM images lose connectivity with bridged network

Jonathan Tullett j+launchpad.net at jkt.im
Tue May 15 19:12:54 UTC 2012


It took a few days, but we've finally had a failure of VM instance 2.
It died 2.5 hours ago. Logging into the dom0 host shows the arp table
dead for that host:

mailer02.xxxx.com               (incomplete)
br0

Logging into the machine itself via console:

root:~# ifconfig
eth0      Link encap:Ethernet  HWaddr 52:54:00:d3:8f:91  
          inet addr:212.XX.239.101  Bcast:212.XX.239.111  Mask:255.255.255.240
          inet6 addr: fe80::5054:ff:fed3:8f91/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:6893246 errors:0 dropped:0 overruns:0 frame:0
          TX packets:8242152 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:2290922658 (2.2 GB)  TX bytes:3314395798 (3.3 GB)

root:~# route -n
Kernel IP routing table
Destination     Gateway         Genmask         Flags Metric Ref    Use Iface
0.0.0.0         212.XX.239.97   0.0.0.0         UG    100    0        0 eth0
212.XX.239.96   0.0.0.0         255.255.255.240 U     0      0        0 eth0

Restarting the network on the vm (/etc/init.d/networking restart) does
nothing. Rebooting the VM brings it back to life.

I'm happy to try with the container again, but using the instructions
provided (even with some additional research online), I can't get it
running.  Please advise.

Thanks.

-- 
You received this bug notification because you are a member of Ubuntu
Foundations Bugs, which is subscribed to bridge-utils in Ubuntu.
https://bugs.launchpad.net/bugs/997978

Title:
  KVM images lose connectivity with bridged network

Status in “bridge-utils” package in Ubuntu:
  New
Status in “libvirt” package in Ubuntu:
  Incomplete

Bug description:
  System:
  -----------
  Dell R410 Dual processor 2.4Ghz w/16G RAM
  Distributor ID: Ubuntu
  Description:    Ubuntu 12.04 LTS
  Release:        12.04
  Codename:       precise

  Setup:
  ---------
  We're running 3 KVM guests, all Ubuntu 12.04 LTS using bridged networking. 

  From the host:
  # cat /etc/network/interfaces
  auto br0
  iface br0 inet static
          address 212.XX.239.98
          netmask 255.255.255.240
          gateway 212.XX.239.97
          bridge_ports eth0
          bridge_fd 9
          bridge_hello 2
          bridge_maxage 12
          bridge_stp off

  # ifconfig eth0
  eth0      Link encap:Ethernet  HWaddr d4:ae:52:84:2d:5a  
            UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
            RX packets:11278363 errors:0 dropped:3128 overruns:0 frame:0
            TX packets:14437384 errors:0 dropped:0 overruns:0 carrier:0
            collisions:0 txqueuelen:1000 
            RX bytes:4115980743 (4.1 GB)  TX bytes:5451961979 (5.4 GB)
            Interrupt:36 Memory:da000000-da012800 

  # ifconfig br0
  br0       Link encap:Ethernet  HWaddr d4:ae:52:84:2d:5a  
            inet addr:212.XX.239.98  Bcast:212.XX.239.111  Mask:255.255.255.240
            inet6 addr: fe80::d6ae:52ff:fe84:2d5a/64 Scope:Link
            UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
            RX packets:1720861 errors:0 dropped:0 overruns:0 frame:0
            TX packets:1708622 errors:0 dropped:0 overruns:0 carrier:0
            collisions:0 txqueuelen:0 
            RX bytes:210152198 (210.1 MB)  TX bytes:300858508 (300.8 MB)

  # brctl show
  bridge name     bridge id               STP enabled     interfaces
  br0             8000.d4ae52842d5a       no              eth0

  I have no default network configured to autostart in libvirt as we're using bridged networking:
  # virsh net-list --all
  Name                 State      Autostart
  -----------------------------------------
  default              inactive   no        

  # arp
  Address                  HWtype  HWaddress           Flags Mask            Iface
  mailer03.xxxx.com       ether   52:54:00:82:5f:0f   C                     br0
  mailer01.xxxx.com       ether   52:54:00:d2:f7:31   C                     br0
  mailer02.xxxx.com       ether   52:54:00:d3:8f:91   C                     br0
  dxi-gw2.xxxx.com        ether   00:1a:30:2a:b1:c0   C                     br0

  From one of the guests:
  <domain type='kvm' id='4'>
    <name>mailer01</name>
    <uuid>d41d1355-84e8-ae23-e84e-227bc0231b97</uuid>
    <memory>2097152</memory>
    <currentMemory>2097152</currentMemory>
    <vcpu>1</vcpu>
    <os>
      <type arch='x86_64' machine='pc-1.0'>hvm</type>
      <boot dev='hd'/>
    </os>
    <features>
      <acpi/>
    </features>
    <clock offset='utc'/>
    <on_poweroff>destroy</on_poweroff>
    <on_reboot>restart</on_reboot>
    <on_crash>destroy</on_crash>
    <devices>
      <emulator>/usr/bin/kvm</emulator>
      <disk type='file' device='disk'>
        <driver name='qemu' type='raw'/>
        <source file='/dev/mapper/vg_main-mailer01--root'/>
        <target dev='hda' bus='ide'/>
        <alias name='ide0-0-0'/>
        <address type='drive' controller='0' bus='0' unit='0'/>
      </disk>
      <disk type='file' device='disk'>
        <driver name='qemu' type='raw'/>
        <source file='/dev/mapper/vg_main-mailer01--swap'/>
        <target dev='hdb' bus='ide'/>
        <alias name='ide0-0-1'/>
        <address type='drive' controller='0' bus='0' unit='1'/>
      </disk>
      <controller type='ide' index='0'>
        <alias name='ide0'/>
        <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x1'/>
      </controller>
      <interface type='bridge'>
        <mac address='52:54:00:d2:f7:31'/>
        <source bridge='br0'/>
        <target dev='vnet0'/>
        <model type='virtio'/>
        <alias name='net0'/>
        <address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/>
      </interface>
      <serial type='pty'>
        <source path='/dev/pts/0'/>
        <target port='0'/>
        <alias name='serial0'/>
      </serial>
      <console type='pty' tty='/dev/pts/0'>
        <source path='/dev/pts/0'/>
        <target type='serial' port='0'/>
        <alias name='serial0'/>
      </console>
      <input type='mouse' bus='ps2'/>
      <graphics type='vnc' port='5900' autoport='yes' listen='127.0.0.1'>
        <listen type='address' address='127.0.0.1'/>
      </graphics>
      <video>
        <model type='cirrus' vram='9216' heads='1'/>
        <alias name='video0'/>
        <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x0'/>
      </video>
      <memballoon model='virtio'>
        <alias name='balloon0'/>
        <address type='pci' domain='0x0000' bus='0x00' slot='0x04' function='0x0'/>
      </memballoon>
    </devices>
    <seclabel type='dynamic' model='apparmor' relabel='yes'>
      <label>libvirt-d41d1355-84e8-ae23-e84e-227bc0231b97</label>
      <imagelabel>libvirt-d41d1355-84e8-ae23-e84e-227bc0231b97</imagelabel>
    </seclabel>
  </domain>

  From within the guest:
  # cat /etc/network/interfaces 
  # The primary network interface
  auto eth0
  iface eth0 inet static
          address 212.XX.239.100
          netmask 255.255.255.240 
          network 212.XX.239.96
          broadcast 212.XX.239.111
          gateway 212.XX.239.97

  # ifconfig
  eth0      Link encap:Ethernet  HWaddr 52:54:00:d2:f7:31  
            inet addr:212.XX.239.100  Bcast:212.XX.239.111  Mask:255.255.255.240
            inet6 addr: fe80::5054:ff:fed2:f731/64 Scope:Link
            UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
            RX packets:5631830 errors:0 dropped:0 overruns:0 frame:0
            TX packets:6683416 errors:0 dropped:0 overruns:0 carrier:0
            collisions:0 txqueuelen:1000 
            RX bytes:2027322829 (2.0 GB)  TX bytes:2076698690 (2.0 GB)

  
  A commandline which starts the KVM guest:
  /usr/bin/kvm -S -M pc-1.0 -enable-kvm -m 2048 -smp 1,sockets=1,cores=1,threads=1 -name mailer01 -uuid d41d1355-84e8-ae23-e84e-227bc0231b97 -nodefconfig -nodefaults -chardev socket,id=charmonitor,path=/var/lib/libvirt/qemu/mailer01.monitor,server,nowait -mon chardev=charmonitor,id=monitor,mode=control -rtc base=utc -no-shutdown -drive file=/dev/mapper/vg_main-mailer01--root,if=none,id=drive-ide0-0-0,format=raw -device ide-drive,bus=ide.0,unit=0,drive=drive-ide0-0-0,id=ide0-0-0,bootindex=1 -drive file=/dev/mapper/vg_main-mailer01--swap,if=none,id=drive-ide0-0-1,format=raw -device ide-drive,bus=ide.0,unit=1,drive=drive-ide0-0-1,id=ide0-0-1 -netdev tap,fd=18,id=hostnet0 -device virtio-net-pci,netdev=hostnet0,id=net0,mac=52:54:00:d2:f7:31,bus=pci.0,addr=0x3 -chardev pty,id=charserial0 -device isa-serial,chardev=charserial0,id=serial0 -usb -vnc 127.0.0.1:0 -vga cirrus -device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x4

  Problem:
  ------------
  Periodically (at least once a day), one or more of the guests lose network connectivity.  Ping responds with 'host unreachable', even from the dom host. Logging in via the serial console shows no problems: eth0 is up, can ping the local host, but no outside connectivity.  Restart the network (/etc/init.d/networking restart) does nothing. Reboot the machine and it comes alive again.

  I've verified there's no arp games going on on the primary host (the
  arp tables remain the same before - when it had connectivity - and
  after - when it doesn't.

  This is a critical issue affecting production services on the latest
  LTS release of Ubuntu. It's similar to an issue which was 'resolved'
  in 10.04 but appears to have risen its ugly head again.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/bridge-utils/+bug/997978/+subscriptions




More information about the foundations-bugs mailing list