[Bug 1057054] Re: poor performance after upgrade to Precise

[Peter Petrakis]

Have you verified that the rdac driver is loaded? Also please account for
the contents of /etc/initramfs-tools/modules,  scsi_dh_rdac must be
loaded at boot time to be discovered correctly.

** Changed in: multipath-tools (Ubuntu)
       Status: New => Incomplete

-- 
You received this bug notification because you are a member of Ubuntu
Foundations Bugs, which is subscribed to multipath-tools in Ubuntu.
https://bugs.launchpad.net/bugs/1057054

Title:
  poor performance after upgrade to Precise

Status in “multipath-tools” package in Ubuntu:
  Incomplete

Bug description:
  I had a Lucid x64 server working with a Dell MD3000i with 4 paths and
  worked as expected.  I added the "prio rdac" line to the conf file,
  then upgraded to Precise, and removed the old mpath_rdac line and
  reboot one more time, just to be sure.  I did this based on a section
  in https://help.ubuntu.com/12.04/serverguide/serverguide.pdf

  as a "sanity check" test, I'm doing 'pv < /dev/mapper/dellsas1 >
  /dev/null' (friendly names enabled).  On Lucid i'd get about 100MB/s
  After upgrading to Precise I get an almost solid 768kB/s.  If I
  instead use the 4 underlying /dev/sd* devices, 2 give errors as
  expected, and 2 run at about 100MB/s as expected so iscsi seems to be
  working correctly and multipath not.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/multipath-tools/+bug/1057054/+subscriptions