[Bug 1540407] Re: multipathd drops paths of a temporarily lost device

[Ryan Harper]

Thorsten,

Here's my PPA with the merged multipath-tools package for s390x:

https://launchpad.net/~raharper/+archive/ubuntu/merges/

You can add it via:

sudo add-apt-repository ppa:raharper/merges
sudo apt-get update
sudo apt-cache policy multipath-tools

The last command should show you a newer version from the ppa as
Candidate.

Then you can update the multpath-tools binaries (and kpartx friends)
with:

sudo apt-get install kpartx kpartx-boot multipath-tools multipath-tools-
boot

This package in the PPA is not in final form; but any testing/feedback on it will help us
close any issues with the merge to latest debian.

-- 
You received this bug notification because you are a member of Ubuntu
Foundations Bugs, which is subscribed to multipath-tools in Ubuntu.
https://bugs.launchpad.net/bugs/1540407

Title:
  multipathd drops paths of a temporarily lost device

Status in multipath-tools package in Ubuntu:
  Triaged

Bug description:
  == Comment: #0 - Thorsten Diehl <thorsten.diehl at de.ibm.com> - 2016-02-01 08:57:28 ==
  # uname -a
  Linux s83lp31 4.4.0-1-generic #15-Ubuntu SMP Thu Jan 21 22:19:04 UTC 2016 s390x s390x s390x GNU/Linux

  # dpkg -s multipath-tools|grep ^Version:
  Version: 0.5.0-7ubuntu9

  # cat /etc/multipath.conf
  defaults {
      default_features "1 queue_if_no_path"
      user_friendly_names yes
      path_grouping_policy multibus
      dev_loss_tmo 2147483647
      fast_io_fail_tmo 5
  }

  blacklist {
      devnode '*'
  }

  blacklist_exceptions {
      devnode "^sd[a-z]+"
  }

  ---------------------------------------
  On a z Systems LPAR with a single LUN, 2 zfcp devices, 2 storage ports, and the following multipath topology:

  mpatha (36005076304ffc3e80000000000003050) dm-0 IBM,2107900
  size=1.0G features='1 queue_if_no_path' hwhandler='0' wp=rw
  `-+- policy='round-robin 0' prio=1 status=active
    |- 0:0:0:1079001136 sda 8:0  active ready running
    |- 0:0:1:1079001136 sdb 8:16 active ready running
    |- 1:0:0:1079001136 sdc 8:32 active ready running
    `- 1:0:1:1079001136 sdd 8:48 active ready running

  I observed the following:
  When I deconfigure one of the two zfcp devices (e.g. via chchp -c 0, or directly on the HMC), the multipathd removes the two paths via these devices from the pathgroup after 10 seconds. When the zfcp devices comes back, it runs through zfcp error recovery and is being set up properly, and also the mid layer objects are looking fine. However, the multipathd does not add them to the path group again.

  Expected behaviour: multipathd does not remove the paths from topology
  list, but holds them as "failed faulty offline" until dev_loss_tmo
  timout is reached (which is infinite here).

  I discussed this already with zfcp development, and it looks most
  likely as a problem with multipathd, rather than zfcp or mid-layer.

  Easy to reproduce: you need two zfcp devices, one LUN, and preferably
  two ports on the storage server (WWPNs). Configure LUN via 2 zfcp
  devices * 2 WWPNs = 4 paths.

  This can be also reproduced on a z/VM guest. Instead of configuing the
  CHPID off, just detach one zfcp device and re-attach it after 30....60
  seconds. Same problem.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/multipath-tools/+bug/1540407/+subscriptions