[Bug 1578505] Re: Raspberry Pi 3 support

[Ryan Finnie]

** Patch added: "flash-kernel-3.0~rc.4ubuntu63.debdiff"
   https://bugs.launchpad.net/ubuntu/+source/flash-kernel/+bug/1578505/+attachment/4656132/+files/flash-kernel-3.0~rc.4ubuntu63.debdiff

** Description changed:

- Debdiff to follow.
- 
  Note that this makes a few assumptions:
  
  1) Will not work as-is; updated u-boot and linux-firmware-raspi2 will
  also be required.  I'm testing with u-boot HEAD and raspberrypi/firmware
  HEAD.  Details at https://wiki.ubuntu.com/ARM/RaspberryPi/RaspberryPi3
  
  2) For some reason, u-boot mkenvimage creates a uboot.env using the RPi2
  config which u-boot just doesn't read, citing a CRC error.  This occurs
  even when using mkenvimage from HEAD.  I'm still trying to determine if
  it's a bug with u-boot, but boot.scr works fine.  I've translated the
  uboot.env to its equivalent boot.scr script and it works fine, so I
  don't see why we can't just use boot.scr on the RPi3.  (saveenv within
  the u-boot shell writes a uboot.env which it can subsequently re-read,
  interestingly.)
  
  3) The all.db entry, minus the move to boot.scr, is based on the RPi2
  entry above, right down to the "XXX".

** Description changed:

  Note that this makes a few assumptions:
  
  1) Will not work as-is; updated u-boot and linux-firmware-raspi2 will
  also be required.  I'm testing with u-boot HEAD and raspberrypi/firmware
  HEAD.  Details at https://wiki.ubuntu.com/ARM/RaspberryPi/RaspberryPi3
  
  2) For some reason, u-boot mkenvimage creates a uboot.env using the RPi2
- config which u-boot just doesn't read, citing a CRC error.  This occurs
- even when using mkenvimage from HEAD.  I'm still trying to determine if
- it's a bug with u-boot, but boot.scr works fine.  I've translated the
- uboot.env to its equivalent boot.scr script and it works fine, so I
- don't see why we can't just use boot.scr on the RPi3.  (saveenv within
- the u-boot shell writes a uboot.env which it can subsequently re-read,
- interestingly.)
+ config which u-boot HEAD just doesn't read, citing a CRC error.  This
+ occurs even when using mkenvimage from HEAD.  I'm still trying to
+ determine if it's a bug with u-boot, but boot.scr works fine.  I've
+ translated the uboot.env to its equivalent boot.scr script and it works
+ fine, so I don't see why we can't just use boot.scr on the RPi3.
+ (saveenv within the u-boot shell writes a uboot.env which it can
+ subsequently re-read, interestingly.)
  
  3) The all.db entry, minus the move to boot.scr, is based on the RPi2
  entry above, right down to the "XXX".

-- 
You received this bug notification because you are a member of Ubuntu
Foundations Bugs, which is subscribed to flash-kernel in Ubuntu.
https://bugs.launchpad.net/bugs/1578505

Title:
  Raspberry Pi 3 support

Status in flash-kernel package in Ubuntu:
  New

Bug description:
  Note that this makes a few assumptions:

  1) Will not work as-is; updated u-boot and linux-firmware-raspi2 will
  also be required.  I'm testing with u-boot HEAD and
  raspberrypi/firmware HEAD.  Details at
  https://wiki.ubuntu.com/ARM/RaspberryPi/RaspberryPi3

  2) For some reason, u-boot mkenvimage creates a uboot.env using the
  RPi2 config which u-boot HEAD just doesn't read, citing a CRC error.
  This occurs even when using mkenvimage from HEAD.  I'm still trying to
  determine if it's a bug with u-boot, but boot.scr works fine.  I've
  translated the uboot.env to its equivalent boot.scr script and it
  works fine, so I don't see why we can't just use boot.scr on the RPi3.
  (saveenv within the u-boot shell writes a uboot.env which it can
  subsequently re-read, interestingly.)

  3) The all.db entry, minus the move to boot.scr, is based on the RPi2
  entry above, right down to the "XXX".

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/flash-kernel/+bug/1578505/+subscriptions