[Bug 1677385] [NEW] Grub boot loader didn't install so OS not able to boot up after installation with multipath enable

[Launchpad Bug Tracker]

You have been subscribed to a public bug:

On UCS-S3260-DHBA IT-HBA card with multipath enabled during the
installation, Grub boot loader didn't seem to install on mutipath device
so after installation it will not boot into OS. Seeing issue with Legacy
boot install on Ubuntu 16.04/16.04.01 and UEFI installation was fine
with multipath enabled during the installation.

Tried installing without multipath enabled during the installation and
it failed to install after choosing the drive.

Ubuntu 14.04.05 with multipath enabled during the installation on this
UCS-S3260-DHBA IT-HBA controller was fine.

Ubuntu 16.04/16.04.01 with multipath enabled during the install on CSC-
C3X60-HBA IT-HBA controller was fine as well. So we are expecting it
should work on UCS-S3260-DHBA IT-HBA controller.

As of now, on UCS-S3260-DHBA IT-HBA controller, user has to install
regular OS install without editing "install disk-
detect/multipath/enable=true" at installer prompt.

** Affects: multipath-tools (Ubuntu)
     Importance: Undecided
         Status: New


** Tags: bot-comment
-- 
Grub boot loader didn't install so OS not able to boot up after installation with multipath enable
https://bugs.launchpad.net/bugs/1677385
You received this bug notification because you are a member of Ubuntu Foundations Bugs, which is subscribed to multipath-tools in Ubuntu.