[Bug 1761294] Re: Network configuration doesn't survive reboots after bionic dist-upgrade

[Andres Rodriguez]

*** This bug is a duplicate of bug 1756846 ***
    https://bugs.launchpad.net/bugs/1756846

Thanks to the investigation from Steve, it seems that during the dist-
upgrade process ifupdown was removed due a transient conflict during the
devel cycle. This caused it to be removed. It being removed didn't
provide network. So this bug is basically a duplicate of #1756846.

17:21 < slangasek> roaksoax: according to your logs, during that upgrade the ifupdown package was removed (because of a transient conflict 
                   during the devel cycle). you do not have the ifupdown package installed.
17:22 < slangasek> roaksoax: reinstalling ifupdown will fix this, and this is basically a duplicate of LP: #1756846


** This bug has been marked a duplicate of bug 1756846
   bridge-utils incompatible with ifupdown on bionic

-- 
You received this bug notification because you are a member of Ubuntu
Foundations Bugs, which is subscribed to netplan.io in Ubuntu.
Matching subscriptions: foundations-bugs
https://bugs.launchpad.net/bugs/1761294

Title:
  Network configuration doesn't survive reboots after bionic dist-
  upgrade

Status in cloud-init package in Ubuntu:
  Invalid
Status in ifupdown package in Ubuntu:
  New
Status in netplan.io package in Ubuntu:
  Invalid

Bug description:
  I deployed Xenial in this machine with MAAS. After deployment i had
  re-configured interfaces manually (on /etc/network/interfaces), and
  removed /etc/network/interfaces.d. At some point, I upgraded the
  machine from Xenial to Bionic, and everything was working just fine
  with /e/n/i.

  About 2/3 weeks ago, I dist-upgraded bionic for the latest packages,
  and after reboot, networking didn't come up.


  To recover the machine, what i did is:

  1. From the console, brought up the interfaces manually (eno1)
  2. added an IP address manually (ip addr add)
  3. Configured netplan and applied the config: 

  network:
      version: 2
      renderer: networkd
      ethernets:
          eno1:
              dhcp4: no
              dhcp6: no
              addresses: [192.168.1.13/24]
              gateway4: 192.168.1.1
              nameservers:
                  addresses: [8.8.8.8, 8.8.4.4]
          usb0:
              dhcp4: no
      bridges:
          br0:
              interfaces: [usb0]
              dhcp4: no
              addresses: [10.90.90.1/24]
              parameters:
                  stp: false
                  forward-delay: 0
                  max-age: 0

  5. Interfaces dont get configured correctly:

  1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
      link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
      inet 127.0.0.1/8 scope host lo
         valid_lft forever preferred_lft forever
      inet6 ::1/128 scope host
         valid_lft forever preferred_lft forever
  17: eno1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP group default qlen 1000
      link/ether ec:a8:6b:fd:ac:70 brd ff:ff:ff:ff:ff:ff
      inet 192.168.1.13/24 scope global eno1
         valid_lft forever preferred_lft forever
      inet6 fe80::eea8:6bff:fefd:ac70/64 scope link
         valid_lft forever preferred_lft forever
  19: usb0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP group default qlen 1000
      link/ether 00:0e:c6:88:b7:9f brd ff:ff:ff:ff:ff:ff
      inet6 fe80::20e:c6ff:fe88:b79f/64 scope link
         valid_lft forever preferred_lft forever
  22: wlp2s0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000
      link/ether c4:d9:87:5b:42:62 brd ff:ff:ff:ff:ff:ff

  6. on reboot, the machine goes back to have no networking again, at
  all.

  Note that I also have /e/n/i configured.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/cloud-init/+bug/1761294/+subscriptions