[Bug 2085903] Re: [SRU] Please merge rpi-eeprom 26

[Brian Murray]

Hello Dave, or anyone else affected,

Accepted rpi-eeprom into oracular-proposed. The package will build now
and be available at https://launchpad.net/ubuntu/+source/rpi-
eeprom/26.3-0ubuntu0.24.10.1 in a few hours, and then in the -proposed
repository.

Please help us by testing this new package.  See
https://wiki.ubuntu.com/Testing/EnableProposed for documentation on how
to enable and use -proposed.  Your feedback will aid us getting this
update out to other Ubuntu users.

If this package fixes the bug for you, please add a comment to this bug,
mentioning the version of the package you tested, what testing has been
performed on the package and change the tag from verification-needed-
oracular to verification-done-oracular. If it does not fix the bug for
you, please add a comment stating that, and change the tag to
verification-failed-oracular. In either case, without details of your
testing we will not be able to proceed.

Further information regarding the verification process can be found at
https://wiki.ubuntu.com/QATeam/PerformingSRUVerification .  Thank you in
advance for helping!

N.B. The updated package will be released to -updates after the bug(s)
fixed by this package have been verified and the package has been in
-proposed for a minimum of 7 days.

** Changed in: rpi-eeprom (Ubuntu Oracular)
       Status: Triaged => Fix Committed

** Tags added: verification-needed verification-needed-oracular

-- 
You received this bug notification because you are a member of Ubuntu
Foundations Bugs, which is subscribed to rpi-eeprom in Ubuntu.
https://bugs.launchpad.net/bugs/2085903

Title:
  [SRU] Please merge rpi-eeprom 26

Status in rpi-eeprom package in Ubuntu:
  Fix Released
Status in rpi-eeprom source package in Noble:
  Triaged
Status in rpi-eeprom source package in Oracular:
  Fix Committed

Bug description:
  [ Impact ]

  The newer boot firmware is required to successfully boot newer
  hardware, including the CM5, and to support recently released addon
  hardware (e.g. the new DSI touch-panel).

  There are also packaging changes here to split the firmware blobs into
  their own architecture independent package, which is to enable the
  next version bump of the rpiboot package (which has now grown a
  dependency on rpi-eeprom upstream). Without this packaging change, we
  cannot bump rpiboot, which in turn means Ubuntu users will be unable
  to flash the CM5 (or possibly future variants of the CM4).

  [ Test Plan ]

  The majority of the changes are to the closed-source boot firmware.
  This is only used on Pi models from the 4 onwards, but does include
  the compute module variants. Due to the packaging changes (split of
  rpi-eeprom-firmware) we must also test the upgrade route works for
  existing users.

  WARNING:
  This test plan should only be carried out by those comfortable recovering from flashing a bad rom. The purpose of this test plan is to uncover boot issues. If you are uncomfortable following the bootloader recovery process [1], please do not attempt the test plan.

  [1]: https://www.raspberrypi.com/documentation/computers/raspberry-
  pi.html#eeprom-boot-flow

  NOTE:
  The test plan may require adjustment of the BOOT_ORDER value stored in the EEPROM configuration, via rpi-eeprom-config. Testers are strongly advised to leave 0x1 (SD card) somewhere in the modified boot order while testing, to allow for easier recovery in the event of issues.

  To cover the upgrade path and boot operation on all relevant models,
  the following test plan is proposed for all proposed $series:

  * Flash the Ubuntu Server for Raspberry Pi pre-installed image for the relevant series to $media
  * Boot the card and wait for cloud-init to complete
  * Login
  * sudo apt update
  * sudo apt install -t $series-proposed rpi-eeprom
  * Ensure rpi-eeprom-firmware is automatically pulled in during update
  * sudo rpi-eeprom-update
  * This will report the current bootloader version installed on the board's EEPROM and the latest available
  * If EEPROM is out of date: sudo rpi-eeprom-update -a
  * If EEPROM is not out of date, force the update:
    - For Pi/CM 5: sudo rpi-eeprom-update /lib/firmware/raspberrypi/bootloader-2712/default/pieeprom-2024-09-23.bin
    - For Pi/CM 4: sudo rpi-eeprom-update /lib/firmware/raspberrypi/bootloader-2711/default/pieeprom-2024-04-15.bin
  * sudo reboot
  * Ensure subsequent boot completes successfully

  Repeat this procedure (including freshly flashed image) for the
  following models:

  * Pi 4B 2GB/4GB/8GB
  * CM4 (as many variants as we have available)
  * Pi 5 2GB/4GB/8GB (2GB specifically to cover the D0 stepping case)
  * CM5

  Repeat this procedure for the following boot $media:

  * SD card (where applicable)
  * USB-attached SSD (all models)
  * NVMe (Pi 5 only)

  [ Risk Analysis ]

  Bumping rpi-eeprom is always potentially risky, given it's flashed to
  the board's EEPROM with all the attendant risks running the gamut all
  the way up to "bricked boards". In mitigation, the version being
  proposed has been used in RaspiOS for some months, and the test plan
  attempts to cover all affected boards, all relevant boot media, and
  includes coverage of the package upgrade.

  [ Original Description ]

  This is required to support LP: #2032178 (merge current rpiboot)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/rpi-eeprom/+bug/2085903/+subscriptions