[Bug 2110263] [NEW] subiquity generates netplan that has PCI ordering sensitivity (bad move)

Fri May 9 01:27:17 UTC 2025

Public bug reported:

Using Ubuntu server, With details reported by inxi as:

$ inxi -Fz
System:
  Kernel: 6.8.0-59-generic arch: x86_64 bits: 64
  Console: pty pts/0 Distro: Ubuntu 24.04.1 LTS (Noble Numbat)
Machine:
  Type: Desktop System: Dell product: Vostro 420 Series v: N/A serial: <superuser required>
  Mobo: Dell model: 0N185P v: A02 serial: <superuser required> BIOS: Dell v: 1.1.4
    date: 04/17/2009
CPU:
  Info: quad core model: Intel Core2 Quad Q8200 bits: 64 type: MCP cache: L2: 4 MiB
  Speed (MHz): avg: 2078 min/max: 1995/2328 cores: 1: 2328 2: 1995 3: 1995 4: 1995
Graphics:
  Device-1: Intel 4 Series Integrated Graphics driver: i915 v: kernel
  Display: server: No display server data found. Headless machine? tty: 225x106
    resolution: 1440x900
  API: EGL v: 1.5 drivers: swrast platforms: surfaceless,device
  API: OpenGL v: 4.5 vendor: mesa v: 24.2.8-1ubuntu1~24.04.1 note: console (EGL sourced)
    renderer: llvmpipe (LLVM 19.1.1 128 bits)
Audio:
  Message: No device data found.
Network:
  Device-1: Realtek RTL8111/8168/8211/8411 PCI Express Gigabit Ethernet driver: r8169
  IF: enp3s0 state: up speed: 100 Mbps duplex: full mac: <filter>
RAID:
  Hardware-1: Intel SATA Controller [RAID mode] driver: ahci
  Device-1: md126 type: mdraid level: mirror status: active size: 1.82 TiB report: 2/2 UU
  Components: Online: 0: sdb 1: sdc
  Device-2: md127 type: mdraid level: N/A status: inactive size: N/A report: N/A
  Components: Online: N/A Spare: 0: sdb 1: sdc
Drives:
  Local Storage: total: raw: 4.09 TiB usable: -1465131160 used: 543.71 GiB
  ID-1: /dev/sda vendor: Toshiba model: DT01ACA050 size: 465.76 GiB
  ID-2: /dev/sdb vendor: Seagate model: ST2000VN004-2E4164 size: 1.82 TiB
  ID-3: /dev/sdc vendor: Seagate model: ST2000VN004-2E4164 size: 1.82 TiB
Partition:
  ID-1: / size: 465.76 GiB used: 52.13 GiB (11.2%) fs: btrfs dev: /dev/sda2
Swap:
  Alert: No swap data was found.
Sensors:
  System Temperatures: cpu: 43.0 C mobo: N/A
  Fan Speeds (rpm): cpu: 1662 mobo: 745
Info:
  Memory: total: 6 GiB available: 5.75 GiB used: 1.32 GiB (23.0%)
  Processes: 235 Uptime: 14h 52m Init: systemd target: graphical (5) Shell: Bash inxi: 3.3.34

I removed a GeForce graphic (PCI) card (not needed using this box in server context) and rebooted. The network did not come up. 

Traced it to this:

$ cat /etc/netplan/00-installer-config.yaml 
# This is the network config written by 'subiquity'
network:
  ethernets:
    enp4s0:
      dhcp4: true
  version: 2

But `ip link` reported an interface `enp3s0` that was DOWN. I could bring it up and all was good. 

So I fixed the netplan to:

$ cat /etc/netplan/00-installer-config.yaml 
# This is the network config written by 'subiquity'
network:
  ethernets:
    enp3s0:
      dhcp4: true
  version: 2

and rebooted and all was good. System is now fine. 

Conclusion. The kernel is naming the ethernet device based on some
hardware ordering. Removing a PCI card saw the device name change.

Given the time this cost me to diagnose, find and fix, and that it
boiled down to a perceived sensitivity of the OS configuration, to
hardware cards, that can be inserted or removed, that can cause it to
fail - in this case to go online and hence be reachable, so had to boot
on a console) and that I believe it's possible to write a netplan more
robustly, I considered this a bug worth fixing (low priority).

My (provisional) conclusion: subiquity should write a netplan that is
robust against PCI card insertion/removal (and associated device name
changes).

** Affects: subiquity (Ubuntu)
     Importance: Undecided
         Status: New

-- 
You received this bug notification because you are a member of Ubuntu
Foundations Bugs, which is subscribed to subiquity in Ubuntu.
https://bugs.launchpad.net/bugs/2110263

Title:
  subiquity generates netplan that has PCI ordering sensitivity (bad
  move)

Status in subiquity package in Ubuntu:
  New

Bug description:
  Using Ubuntu server, With details reported by inxi as:

  $ inxi -Fz
  System:
    Kernel: 6.8.0-59-generic arch: x86_64 bits: 64
    Console: pty pts/0 Distro: Ubuntu 24.04.1 LTS (Noble Numbat)
  Machine:
    Type: Desktop System: Dell product: Vostro 420 Series v: N/A serial: <superuser required>
    Mobo: Dell model: 0N185P v: A02 serial: <superuser required> BIOS: Dell v: 1.1.4
      date: 04/17/2009
  CPU:
    Info: quad core model: Intel Core2 Quad Q8200 bits: 64 type: MCP cache: L2: 4 MiB
    Speed (MHz): avg: 2078 min/max: 1995/2328 cores: 1: 2328 2: 1995 3: 1995 4: 1995
  Graphics:
    Device-1: Intel 4 Series Integrated Graphics driver: i915 v: kernel
    Display: server: No display server data found. Headless machine? tty: 225x106
      resolution: 1440x900
    API: EGL v: 1.5 drivers: swrast platforms: surfaceless,device
    API: OpenGL v: 4.5 vendor: mesa v: 24.2.8-1ubuntu1~24.04.1 note: console (EGL sourced)
      renderer: llvmpipe (LLVM 19.1.1 128 bits)
  Audio:
    Message: No device data found.
  Network:
    Device-1: Realtek RTL8111/8168/8211/8411 PCI Express Gigabit Ethernet driver: r8169
    IF: enp3s0 state: up speed: 100 Mbps duplex: full mac: <filter>
  RAID:
    Hardware-1: Intel SATA Controller [RAID mode] driver: ahci
    Device-1: md126 type: mdraid level: mirror status: active size: 1.82 TiB report: 2/2 UU
    Components: Online: 0: sdb 1: sdc
    Device-2: md127 type: mdraid level: N/A status: inactive size: N/A report: N/A
    Components: Online: N/A Spare: 0: sdb 1: sdc
  Drives:
    Local Storage: total: raw: 4.09 TiB usable: -1465131160 used: 543.71 GiB
    ID-1: /dev/sda vendor: Toshiba model: DT01ACA050 size: 465.76 GiB
    ID-2: /dev/sdb vendor: Seagate model: ST2000VN004-2E4164 size: 1.82 TiB
    ID-3: /dev/sdc vendor: Seagate model: ST2000VN004-2E4164 size: 1.82 TiB
  Partition:
    ID-1: / size: 465.76 GiB used: 52.13 GiB (11.2%) fs: btrfs dev: /dev/sda2
  Swap:
    Alert: No swap data was found.
  Sensors:
    System Temperatures: cpu: 43.0 C mobo: N/A
    Fan Speeds (rpm): cpu: 1662 mobo: 745
  Info:
    Memory: total: 6 GiB available: 5.75 GiB used: 1.32 GiB (23.0%)
    Processes: 235 Uptime: 14h 52m Init: systemd target: graphical (5) Shell: Bash inxi: 3.3.34

  I removed a GeForce graphic (PCI) card (not needed using this box in server context) and rebooted. The network did not come up. 

  Traced it to this:

  $ cat /etc/netplan/00-installer-config.yaml 
  # This is the network config written by 'subiquity'
  network:
    ethernets:
      enp4s0:
        dhcp4: true
    version: 2

  But `ip link` reported an interface `enp3s0` that was DOWN. I could bring it up and all was good. 

  So I fixed the netplan to:

  $ cat /etc/netplan/00-installer-config.yaml 
  # This is the network config written by 'subiquity'
  network:
    ethernets:
      enp3s0:
        dhcp4: true
    version: 2

  and rebooted and all was good. System is now fine. 

  Conclusion. The kernel is naming the ethernet device based on some
  hardware ordering. Removing a PCI card saw the device name change.

  Given the time this cost me to diagnose, find and fix, and that it
  boiled down to a perceived sensitivity of the OS configuration, to
  hardware cards, that can be inserted or removed, that can cause it to
  fail - in this case to go online and hence be reachable, so had to
  boot on a console) and that I believe it's possible to write a netplan
  more robustly, I considered this a bug worth fixing (low priority).

  My (provisional) conclusion: subiquity should write a netplan that is
  robust against PCI card insertion/removal (and associated device name
  changes).

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/subiquity/+bug/2110263/+subscriptions