[PATCH 3/5][FWTS-TEST] arg-show-tests-full-0001: update log to keep in sync with fwts
Keng-Yu Lin
kengyu at canonical.com
Wed Jan 16 08:04:16 UTC 2013
On Tue, Jan 15, 2013 at 6:45 PM, Colin King <colin.king at canonical.com> wrote:
> From: Colin Ian King <colin.king at canonical.com>
>
> fwts added some extra spacing in the output and also added a new
> test uefirtmisc and some new subtests, so update this test to
> keep in sync with fwts
>
> Signed-off-by: Colin Ian King <colin.king at canonical.com>
> ---
> .../arg-show-tests-full-0001.log | 130 +++++++++++----------
> 1 file changed, 69 insertions(+), 61 deletions(-)
>
> diff --git a/arg-show-tests-full-0001/arg-show-tests-full-0001.log b/arg-show-tests-full-0001/arg-show-tests-full-0001.log
> index 431c2b4..4b811fd 100644
> --- a/arg-show-tests-full-0001/arg-show-tests-full-0001.log
> +++ b/arg-show-tests-full-0001/arg-show-tests-full-0001.log
> @@ -1,58 +1,59 @@
> Batch tests:
> - acpiinfo (3 tests):
> + acpiinfo (3 tests):
> Determine Kernel ACPI version.
> Determine machines ACPI version.
> Determine AML compiler.
> - acpitables (1 test):
> + acpitables (1 test):
> Check ACPI tables.
> - apicedge (1 test):
> + apicedge (1 test):
> Legacy and PCI Interrupt Edge/Level trigger checks.
> - apicinstance (1 test):
> + apicinstance (1 test):
> Check single instance of APIC/MADT table.
> - aspm (2 tests):
> + aspm (2 tests):
> PCIe ASPM ACPI test.
> PCIe ASPM registers test.
> - bios32 (1 test):
> + bios32 (1 test):
> Check BIOS32 Service Directory.
> - bios_info (1 test):
> + bios_info (1 test):
> Gather BIOS DMI information
> - checksum (1 test):
> + checksum (1 test):
> Check ACPI table checksums.
> - cpufreq (1 test):
> + cpufreq (1 test):
> CPU P-State Checks.
> - crs (1 test):
> + crs (1 test):
> Check PCI host bridge configuration using _CRS.
> - csm (1 test):
> + csm (1 test):
> Check for UEFI Compatibility Support Module.
> - cstates (1 test):
> + cstates (1 test):
> Check all CPUs C-states.
> - dmar (1 test):
> + dmar (1 test):
> Check DMA Remapping.
> - dmi_decode (1 test):
> + dmi_decode (1 test):
> Test DMI/SMBIOS tables for errors.
> - ebda (1 test):
> + ebda (1 test):
> Check EBDA is reserved in E820 table.
> - fadt (1 test):
> + fadt (1 test):
> Check FADT SCI_EN bit is enabled.
> - fan (2 tests):
> + fan (2 tests):
> Check fan status.
> Load system, check CPU fan status.
> - hda_audio (1 test):
> + hda_audio (1 test):
> Check HDA Audio Pin Configs.
> - hpet_check (3 tests):
> + hpet_check (4 tests):
> Check HPET base in kernel log.
> - Sanity check HPET configuration.
> + Check HPET base in HPET table.
> Check HPET base in DSDT and/or SSDT.
> - klog (1 test):
> + Sanity check HPET configuration.
> + klog (1 test):
> Kernel log error check.
> - maxfreq (1 test):
> + maxfreq (1 test):
> Maximum CPU frequency check.
> - maxreadreq (1 test):
> + maxreadreq (1 test):
> Check firmware settings MaxReadReq for PCI Express devices.
> - mcfg (2 tests):
> + mcfg (2 tests):
> Validate MCFG table.
> Validate MCFG PCI config space.
> - method (139 tests):
> + method (139 tests):
> Check Method Names.
> Check _AEI.
> Check _DDN (DOS Device Name).
> @@ -192,9 +193,9 @@ Batch tests:
> Check _ROM (Get ROM Data).
> Check _SPD (Set POST Device).
> Check _VPO (Video POST Options).
> - microcode (1 test):
> + microcode (1 test):
> Check for most recent microcode being loaded.
> - mpcheck (9 tests):
> + mpcheck (9 tests):
> Check MP header.
> Check MP CPU entries.
> Check MP Bus entries.
> @@ -204,107 +205,114 @@ Batch tests:
> Check MP System Address entries.
> Check MP Bus Hierarchy entries.
> Check MP Compatible Bus Address Space entries.
> - msr (5 tests):
> + msr (5 tests):
> Check CPU generic MSRs.
> Check CPU specific model MSRs.
> Check all P State Ratios.
> Check C1 and C3 autodemotion.
> Check SMRR MSR registers.
> - mtrr (3 tests):
> + mtrr (3 tests):
> Validate the kernel MTRR IOMEM setup.
> Validate the MTRR setup across all processors.
> Check for AMD MtrrFixDramModEn being cleared by the BIOS.
> - nx (3 tests):
> + nx (3 tests):
> Check CPU NX capability.
> Check all CPUs have same BIOS set NX flag.
> Check all CPUs have same msr setting in MSR 0x1a0.
> - oops (1 test):
> + oops (1 test):
> Kernel log oops check.
> - os2gap (1 test):
> + os2gap (1 test):
> Check the OS/2 15Mb memory hole is absent.
> - osilinux (1 test):
> + osilinux (1 test):
> Disassemble DSDT to check for _OSI("Linux").
> - pcc (1 test):
> + pcc (1 test):
> Check PCCH.
> - pciirq (1 test):
> + pciirq (1 test):
> PCI IRQ Routing Table.
> - pnp (1 test):
> + pnp (1 test):
> Check PnP BIOS Support Installation structure.
> - smbios (1 test):
> + smbios (1 test):
> Find and Check SMBIOS Table Entry Point.
> - syntaxcheck (2 tests):
> + syntaxcheck (2 tests):
> Disassemble and reassemble DSDT
> Disassemble and reassemble SSDT
> - version (3 tests):
> + version (3 tests):
> Gather kernel signature.
> Gather kernel system information.
> Gather APCI driver version.
> - virt (1 test):
> + virt (1 test):
> Check CPU Virtualisation Configuration.
> - wakealarm (4 tests):
> + wakealarm (4 tests):
> Check existence of /sys/class/rtc/rtc0/wakealarm.
> Trigger wakealarm for 1 seconds in the future.
> Check if wakealarm is fired.
> Multiple wakealarm firing tests.
> - wmi (2 tests):
> + wmi (2 tests):
> Check Windows Management Instrumentation in DSDT
> Check Windows Management Instrumentation in SSDT
>
> Interactive tests:
> - ac_adapter (3 tests):
> + ac_adapter (3 tests):
> Test ACPI ac_adapter state.
> Test ac_adapter initial on-line state.
> Test ac_adapter state changes.
> - battery (1 test):
> + battery (1 test):
> Check batteries.
> - brightness (5 tests):
> + brightness (5 tests):
> Check for maximum and actual brightness.
> Change actual brightness.
> Observe all brightness changes.
> Observe min, max brightness changes.
> Check brightness hotkeys.
> - hotkey (1 test):
> + hotkey (1 test):
> Hotkey keypress checks.
> - lid (3 tests):
> + lid (3 tests):
> Test LID buttons report open correctly.
> Test LID buttons on a single open/close.
> Test LID buttons on multiple open/close events.
> - power_button (1 test):
> + power_button (1 test):
> Test press of power button and ACPI event.
>
> Power States tests:
> - s3 (1 test):
> + s3 (1 test):
> S3 suspend/resume test.
> - s3power (1 test):
> + s3power (1 test):
> S3 power loss during suspend test.
> - s4 (1 test):
> + s4 (1 test):
> S4 hibernate/resume test.
>
> Utilities:
> - acpidump (1 test):
> + acpidump (1 test):
> Dump ACPI tables.
> - cmosdump (1 test):
> + cmosdump (1 test):
> Dump CMOS Memory.
> - ebdadump (1 test):
> + ebdadump (1 test):
> Dump EBDA region.
> - memmapdump (1 test):
> + memmapdump (1 test):
> Dump system memory map.
> - mpdump (1 test):
> + mpdump (1 test):
> Dump Multi Processor Data.
> - romdump (1 test):
> + romdump (1 test):
> Dump ROM data.
> - uefidump (1 test):
> + uefidump (1 test):
> Dump UEFI Variables.
>
> Unsafe tests:
> - uefirttime (4 tests):
> + uefirtmisc (2 tests):
> + Test for UEFI miscellaneous runtime service interfaces.
> + Stress test for UEFI miscellaneous runtime service interfaces.
> + uefirttime (4 tests):
> Test UEFI RT service get time interface.
> Test UEFI RT service set time interface.
> Test UEFI RT service get wakeup time interface.
> Test UEFI RT service set wakeup time interface.
> - uefirtvariabl (3 tests):
> + uefirtvariable (7 tests):
> Test UEFI RT service get variable interface.
> Test UEFI RT service get next variable name interface.
> Test UEFI RT service set variable interface.
> + Test UEFI RT service query variable info interface.
> + Test UEFI RT service variable interface stress test.
> + Test UEFI RT service set variable interface stress test.
> + Test UEFI RT service query variable info interface stress test.
>
> -Total of 240 tests
> +Total of 247 tests
> --
> 1.8.0
>
Acked-by: Keng-Yu Lin <kengyu at canonical.com>
More information about the fwts-devel
mailing list