[ubuntu/groovy-proposed] fprintd 1.90.9-1~ubuntu20.10.1 (Accepted)
Marco Trevisan (Treviño)
marco at ubuntu.com
Wed Feb 24 00:45:47 UTC 2021
fprintd (1.90.9-1~ubuntu20.10.1) groovy; urgency=medium
* Backport to groovy
fprintd (1.90.9-1) unstable; urgency=medium
[ Marco Trevisan (Treviño) ]
* New upstream release:
- Fix multiple daemon lockup issues (#97)
- Fix print garbage collection to not delete used prints
- pam: Use the device with the most prints
* debian/control: Mark fprintd-doc as Multi-Arch: foreign
[ Helmut Grohne ]
* Fix nocheck FTFBS: Drop <!nocheck> from non-optional dependencies.
(Closes: #977395)
fprintd (1.90.8-1~ubuntu20.10.1) groovy; urgency=medium
* No-change backport to groovy (LP: #1908119)
* debian/{control,gbp.conf}: Prepare for ubuntu groovy branching
fprintd (1.90.8-1) unstable; urgency=medium
* New upstream release
- pam: Only listen to NameOwnerChanged after fprintd is known to run
- Place new ObjectManager DBus API at /net/reactivated/Fprint
* debian/patches: Remove all patches, applied upstream or not needed anymore
* debian/control: Depend on systemd 235, but only in linux
* debian/rules: Require systemd and set unit path only on linux
* debian/fprintd.install: Use dh-exec to filter linux-only files
fprintd (1.90.7-1) unstable; urgency=medium
* New upstream release
- Fix fprintd DBus configuration (Closes: #976990)
- Change details of what requires authorization
- Fix various race conditions in pam_fprintd
- Permit interactive authorization from fprintd utilities
- Do not allow deletion while another operation is ongoing
- pam: Guard strdup calls against NULL pointers
* debian/patches:
- Refresh
- Ignore NameOwnerChanged until fprintd is running
fprintd (1.90.5-2) unstable; urgency=medium
* debian/patches: Make tests run with actual required libfprint version
* debian/control: Remove test-only dependency on libfprint 1.90.4.
Tests are now working with older libfprint versions too
* debian/control: Add myself to Uploaders
* debian/gbp.conf: Include suggested settings by GNOME team.
Even if fprintd is not part of GNOME I think these settings are good
practice anyways.
fprintd (1.90.5-1) unstable; urgency=medium
* New upstream release:
- Permit building with polkit older than 0.114
- Fix possible issues with PAM test
- Fix incorrect DBus policy
- Fix build so that CFLAGS environment is correctly used
- Skip hotplug test with older libfprint (which times out otherwise)
* debian/patches: Drop patches applied upstream
fprintd (1.90.4-1) unstable; urgency=medium
* Team upload.
[ Marco Trevisan (Treviño) ]
* New upstream release:
- Use GDBus and async Polkit checks
- Authentication is now required to enroll a new print (LP: #1532264,
Closes: #719004)
- Add support for the libfprint early reporting mechanism
- Proper hotplug support together with libfprint 1.90.4
- Handle STATE_DIRECTORY containing multiple paths
- Various memory fixes (LP: #1888495)
* debian/control:
- Remove build dependency on dbus-glib (Closes: #955893)
- Mark as <!nocheck> the packages required only for testing
- Use debhelper 13
- Bump libfprint-2 dependency on 1.90.4 on test case
* debian/rules:
- remove unneeded override to force --fail-missing (as per dh 13)
- Increase tests timeout multiplier
* debian/patches:
- Refresh
- Define auto-pointers functions if not defined:
Fixes a build failure with debian polkit version.
- Cleanup pam-wrapper temporary dir when running tests
- Fix dbus-policy file to address lintian
- Ensure we generate debug symbols in debian builds
[ Laurent Bigonville ]
* debian/control: Bump Standards-Version to 4.5.1 (no further changes)
fprintd (1.90.1-2) unstable; urgency=low
* Team upload.
* Simplify the installation of the pam-config, do not install one
configuration file per architecture
* debian/NEWS: Add an news entry explaining that the user will have to
re-enroll their fingerprints upon update to 1.90.1.
Date: Mon, 22 Feb 2021 16:14:02 +0100
Changed-By: Marco Trevisan (Treviño) <marco at ubuntu.com>
Maintainer: Ubuntu Developers <ubuntu-devel-discuss at lists.ubuntu.com>
Signed-By: Iain Lane <iain at orangesquash.org.uk>
https://launchpad.net/ubuntu/+source/fprintd/1.90.9-1~ubuntu20.10.1
-------------- next part --------------
Format: 1.8
Date: Mon, 22 Feb 2021 16:14:02 +0100
Source: fprintd
Architecture: source
Version: 1.90.9-1~ubuntu20.10.1
Distribution: groovy
Urgency: medium
Maintainer: Ubuntu Developers <ubuntu-devel-discuss at lists.ubuntu.com>
Changed-By: Marco Trevisan (Treviño) <marco at ubuntu.com>
Closes: 719004 955893 976990 977395
Launchpad-Bugs-Fixed: 1532264 1888495 1908119
Changes:
fprintd (1.90.9-1~ubuntu20.10.1) groovy; urgency=medium
.
* Backport to groovy
.
fprintd (1.90.9-1) unstable; urgency=medium
.
[ Marco Trevisan (Treviño) ]
* New upstream release:
- Fix multiple daemon lockup issues (#97)
- Fix print garbage collection to not delete used prints
- pam: Use the device with the most prints
* debian/control: Mark fprintd-doc as Multi-Arch: foreign
.
[ Helmut Grohne ]
* Fix nocheck FTFBS: Drop <!nocheck> from non-optional dependencies.
(Closes: #977395)
.
fprintd (1.90.8-1~ubuntu20.10.1) groovy; urgency=medium
.
* No-change backport to groovy (LP: #1908119)
* debian/{control,gbp.conf}: Prepare for ubuntu groovy branching
.
fprintd (1.90.8-1) unstable; urgency=medium
.
* New upstream release
- pam: Only listen to NameOwnerChanged after fprintd is known to run
- Place new ObjectManager DBus API at /net/reactivated/Fprint
* debian/patches: Remove all patches, applied upstream or not needed anymore
* debian/control: Depend on systemd 235, but only in linux
* debian/rules: Require systemd and set unit path only on linux
* debian/fprintd.install: Use dh-exec to filter linux-only files
.
fprintd (1.90.7-1) unstable; urgency=medium
.
* New upstream release
- Fix fprintd DBus configuration (Closes: #976990)
- Change details of what requires authorization
- Fix various race conditions in pam_fprintd
- Permit interactive authorization from fprintd utilities
- Do not allow deletion while another operation is ongoing
- pam: Guard strdup calls against NULL pointers
* debian/patches:
- Refresh
- Ignore NameOwnerChanged until fprintd is running
.
fprintd (1.90.5-2) unstable; urgency=medium
.
* debian/patches: Make tests run with actual required libfprint version
* debian/control: Remove test-only dependency on libfprint 1.90.4.
Tests are now working with older libfprint versions too
* debian/control: Add myself to Uploaders
* debian/gbp.conf: Include suggested settings by GNOME team.
Even if fprintd is not part of GNOME I think these settings are good
practice anyways.
.
fprintd (1.90.5-1) unstable; urgency=medium
.
* New upstream release:
- Permit building with polkit older than 0.114
- Fix possible issues with PAM test
- Fix incorrect DBus policy
- Fix build so that CFLAGS environment is correctly used
- Skip hotplug test with older libfprint (which times out otherwise)
* debian/patches: Drop patches applied upstream
.
fprintd (1.90.4-1) unstable; urgency=medium
.
* Team upload.
[ Marco Trevisan (Treviño) ]
* New upstream release:
- Use GDBus and async Polkit checks
- Authentication is now required to enroll a new print (LP: #1532264,
Closes: #719004)
- Add support for the libfprint early reporting mechanism
- Proper hotplug support together with libfprint 1.90.4
- Handle STATE_DIRECTORY containing multiple paths
- Various memory fixes (LP: #1888495)
* debian/control:
- Remove build dependency on dbus-glib (Closes: #955893)
- Mark as <!nocheck> the packages required only for testing
- Use debhelper 13
- Bump libfprint-2 dependency on 1.90.4 on test case
* debian/rules:
- remove unneeded override to force --fail-missing (as per dh 13)
- Increase tests timeout multiplier
* debian/patches:
- Refresh
- Define auto-pointers functions if not defined:
Fixes a build failure with debian polkit version.
- Cleanup pam-wrapper temporary dir when running tests
- Fix dbus-policy file to address lintian
- Ensure we generate debug symbols in debian builds
.
[ Laurent Bigonville ]
* debian/control: Bump Standards-Version to 4.5.1 (no further changes)
.
fprintd (1.90.1-2) unstable; urgency=low
.
* Team upload.
* Simplify the installation of the pam-config, do not install one
configuration file per architecture
* debian/NEWS: Add an news entry explaining that the user will have to
re-enroll their fingerprints upon update to 1.90.1.
Checksums-Sha1:
ca6bbdde021dd20880331abe37cf4d90e16dc5a6 2699 fprintd_1.90.9-1~ubuntu20.10.1.dsc
b5b12025ac7afdd15b83ca451289e859e76c6495 636538 fprintd_1.90.9.orig.tar.bz2
f531ce9527e300822e138aa53c61bf3f3d17abe0 7088 fprintd_1.90.9-1~ubuntu20.10.1.debian.tar.xz
fef8aa2f09b136b80f73d915b2f9f7a5d062efc4 12389 fprintd_1.90.9-1~ubuntu20.10.1_source.buildinfo
Checksums-Sha256:
f575da0a86df101a1e3aa60e2df2a81a2d10275db517d27e9b23f2b79f077658 2699 fprintd_1.90.9-1~ubuntu20.10.1.dsc
9c9dcef205be0dfc669e2c892b28224dcd517674214aba745697e7341e3aef6f 636538 fprintd_1.90.9.orig.tar.bz2
15ae88f9fbd765a746a9ee298a0621d4319c38b4452c59378b22e9cc883ec5e7 7088 fprintd_1.90.9-1~ubuntu20.10.1.debian.tar.xz
0f921c568178a0f7d214f6b854bf2d05a905c1fc2e7667e2c51748d0c243b65e 12389 fprintd_1.90.9-1~ubuntu20.10.1_source.buildinfo
Files:
bffff73e58120bc8e9ff897b89b62d49 2699 misc optional fprintd_1.90.9-1~ubuntu20.10.1.dsc
9e29cedc0e6648ec556ce78c245467a0 636538 misc optional fprintd_1.90.9.orig.tar.bz2
1f21ddf1fcaf8a6ffd2d94b4ed7a536f 7088 misc optional fprintd_1.90.9-1~ubuntu20.10.1.debian.tar.xz
33cc85608815fac47218d34a6bbdedca 12389 misc optional fprintd_1.90.9-1~ubuntu20.10.1_source.buildinfo
Original-Maintainer: FingerForce Team <fingerforce-devel at lists.alioth.debian.org>
More information about the Groovy-changes
mailing list