Accepted moblin-image-creator 0.4 (source)

Tollef Fog Heen tfheen at ubuntu.com
Mon Jul 16 21:40:23 BST 2007


Accepted:
 OK: moblin-image-creator_0.4.tar.gz
 OK: moblin-image-creator_0.4.dsc
     -> Component: universe Section: devel

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Format: 1.7
Date: Mon, 16 Jul 2007 21:47:36 +0200
Source: moblin-image-creator
Binary: moblin-image-creator
Architecture: source
Version: 0.4
Distribution: gutsy
Urgency: low
Maintainer: Rusty Lynch <rusty.lynch at intel.com>
Changed-By: Tollef Fog Heen <tfheen at ubuntu.com>
Description: 
 moblin-image-creator - Mobile-Linux Image Creator
Changes: 
 moblin-image-creator (0.4) gutsy; urgency=low
 .
   [ Rusty Lynch ]
   * Changed the entry level script from 'project-builder
     to 'image-creator', and fixed a few random locations that
     were still using the old name.
   * Reworked the usb installation script, and the usb and disk initramfs
     scripts to work correctly with the ubuntu kernel now that the HD shows
     up as /dev/sda.  Also performed some cleanup in the early boot process.
   * Cleaning up the mccaslin base fset by removing references to the
     zi9, making the core fset use the ubuntu 386 kernel and removing the
     previous 'ubuntu-flavored-core'
   * Removing local apt repository code from both menlow and mccaslin
     platforms since it has proved itself to not be needed and as a
     result was just complicating the build process
   * Adding 'umount-project' and 'umount-target' command line options
   * Adding 'run-project' and 'run-target' command line options
     that allow for arbitrary execution of commands in either the buildroot
     or target root file-system
   * reworked the pdk_utils.exeCommand command to use the normal stdout/stderr
     when an output array is not passed in.
   * reworked the mccaslin base fset to fit with packaging changes from the
     ubuntu gutsy sprint
 .
   [ Tollef Fog Heen ]
   * Add a Depends on bzip2.
   * Add restricted to the default list of sources.list.
   * Make the Samsung Q1 image use linux-generic, not linux-image-generic.  This
     should enable more of the hardware.
Files: 
 d36ce9423b9d751f6519b327c78cf1a5 666 devel extra moblin-image-creator_0.4.dsc
 a8cda7e0b2ae54e7f92699289b209ff5 58404 devel extra moblin-image-creator_0.4.tar.gz

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.6 (GNU/Linux)

iQCVAwUBRpvXC8cmO3YsB1PjAQIJHwQAiekeiy0A1ukLG/kuZCSMjDgsAjWFetY3
kiq9ra3dDm42u85dCLJWPq5fdTbWbnHdlZP12AC1Ir/c+WGuk+IlToy8mUdEH0l7
+IAPpdKzGi5tgVGVgBKR+9Zwnmx7qThS2XNiVejJlonGK+a5Ka7v2K2XccZB2HTC
cPC8IDISZG0=
=1lti
-----END PGP SIGNATURE-----





More information about the gutsy-changes mailing list