Using maas+juju to deploy openstack, I can't run 02-maasdeploy.sh successfully.

[Narinder Gupta]

Hi Yuanyou,
Will you please let me know your host environment and I am wondering you
are using root user? I have not tested 02-maasdeploy.sh script with root
user yet. Will you please try it with ubuntu user?

Will you please try this with latest git repository as i checked in few
changes recently within couple of days for JOID.

In new version i have added default lab which is very much like you
are trying the MAAS on.  I tried to configure the ssh appropriately in
script before i copy the values. So may be running as ubuntu user should be
good. Also in yaml file try the ubuntu user.

Same was tested by 4 different labs so far it is working.


Thanks and Regards,
Narinder Gupta (PMP)                   narinder.gupta at canonical.com
Canonical, Ltd.                    narindergupta [irc.freenode.net]
+1.281.736.5150                            narindergupta2007[skype]

Ubuntu- Linux for human beings | www.ubuntu.com | www.canonical.com


On Fri, Dec 4, 2015 at 8:35 PM, zhangyuanyou <zhangyuanyou at huawei.com>
wrote:

> Hi  Artur Tyloch,
>    I'm working on maas+juju to deploy openstack,now I edit the
> 02-maasdeploy.sh and excute it.
> But this line "maas-deployer -c deployment.yaml -d --force" can't pass ,it
> always let me to input the password like this:
>
> *2015-12-04 17:45:54,032 DEBUG Executing: 'virt-install --connect
> qemu:///system --name opnfv-maas-intel --ram 4096 --vcpus 4 --disk
> vol=default/opnfv-maas-intel-root.img,format=qcow2,bus=virtio,io=native
> --disk
> vol=default/opnfv-maas-intel-seed.img,format=raw,bus=virtio,io=native
> --network bridge=brAdm,model=virtio --network bridge=brData,model=virtio
> --network bridge=brPublic,model=virtio --noautoconsole --vnc --import'
> stdin=''*
> *2015-12-04 17:45:55,145 DEBUG Executing: 'virsh -c qemu:///system
> autostart opnfv-maas-intel' stdin=''*
> *2015-12-04 17:45:55,162 DEBUG Waiting for MAAS vm to come up for ssh..*
> *2015-12-04 17:45:55,163 DEBUG Using ip address specified: 192.168.212.140*
> *2015-12-04 17:45:55,163 DEBUG Executing: 'ssh -i /root/.ssh/id_maas -o
> UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no
> root at 192.168.212.140 <root at 192.168.212.140> true' stdin=''*
>
>
> *root at 192.168.212.140's <root at 192.168.212.140's> password: *I edited the
> file deployment.yaml like this:
> *demo-maas:*
> *    maas:*
> *        # Defines the general setup for the MAAS environment, including
> the*
> *        # username and password for the host as well as the MAAS server.*
> *        user: root*
> *        password: root*
>
> *        # Contains the virtual machine parameters for creating the MAAS
> virtual*
> *        # server. Here you can configure the name of the virsh domain,
> the*
> *        # parameters for how the network is attached.*
> *        name: opnfv-maas-intel*
> *        interfaces:
> ['bridge=brAdm,model=virtio','bridge=brData,model=virtio','bridge=brPublic,model=virtio']*
> *        memory: 4096*
> *        vcpus: 4*
> *        arch: amd64*
> *        pool: default*
> *        disk_size: 160G*
>
> *        # Apt http proxy setting(s)*
> *        apt_http_proxy:*
>
> *        apt_sources:*
> *          - ppa:maas/stable*
> *          - ppa:juju/stable*
>
> *        # Virsh power settings*
> *        # Specifies the uri and keys to use for virsh power control of
> the *
> *        # juju virtual machine. If the uri is omitted, the value for the*
> *        # --remote is used. If no power settings are desired, then do not*
> *        # supply the virsh block.*
> *        virsh:*
> *            rsa_priv_key: /home/ubuntu/.ssh/id_rsa*
> *            rsa_pub_key: /home/ubuntu/.ssh/id_rsa.pub*
> *#            uri: qemu+ssh://ubuntu@10.4.1.1/system
> <http://ubuntu@10.4.1.1/system>*
>
> *        # Defines the IP Address that the configuration script will use
> to*
> *        # to access the MAAS controller via SSH.*
>         ip_address: 192.168.212.140
>
> Could you help me to resolve the question ? Any assistance is greatly
> appreciated.
>
> Thanks.
> Yuanyou
>
>
>
>
>
> --
> Juju mailing list
> Juju at lists.ubuntu.com
> Modify settings or unsubscribe at:
> https://lists.ubuntu.com/mailman/listinfo/juju
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.ubuntu.com/archives/juju/attachments/20151205/8e6e7119/attachment.html>