[Bug 8059] cdrecord/k3b/nautilus problem

Fri Dec 9 21:51:55 UTC 2005

Please do not reply to this email.  You can add comments at
http://bugzilla.ubuntu.com/show_bug.cgi?id=8059
Ubuntu | linux

------- Additional Comments From kleeman at cims.nyu.edu  2005-12-09 21:51 UTC -------
Followed the instructions and rebooted with a cd-rw (written) in the drive. No
longer produced hard lockup however similar kernel error messages were produced
(see below) and the drive was unusable. here are the last 200 lines or so of
dmesg following the insertion of a blank cdrw (nothing occured with nautilus):

[17180937.072000] VFS: busy inodes on changed media.
[17180937.080000] VFS: busy inodes on changed media.
[17180937.092000] VFS: busy inodes on changed media.
[17180937.100000] VFS: busy inodes on changed media.
[17180937.112000] VFS: busy inodes on changed media.
[17180939.124000] VFS: busy inodes on changed media.
[17180939.132000] VFS: busy inodes on changed media.
[17180941.148000] VFS: busy inodes on changed media.
[17180941.156000] VFS: busy inodes on changed media.
[17180943.172000] VFS: busy inodes on changed media.
[17180943.180000] VFS: busy inodes on changed media.
[17180945.196000] VFS: busy inodes on changed media.
[17180945.204000] VFS: busy inodes on changed media.
[17180947.220000] VFS: busy inodes on changed media.
[17180947.228000] VFS: busy inodes on changed media.
[17180949.244000] VFS: busy inodes on changed media.
[17180949.252000] VFS: busy inodes on changed media.
[17180951.268000] VFS: busy inodes on changed media.
[17180951.276000] VFS: busy inodes on changed media.
[17180953.292000] VFS: busy inodes on changed media.
[17180953.300000] VFS: busy inodes on changed media.
[17180955.316000] VFS: busy inodes on changed media.
[17180955.328000] VFS: busy inodes on changed media.
[17180957.340000] VFS: busy inodes on changed media.
[17180957.348000] VFS: busy inodes on changed media.
[17180976.152000] VFS: busy inodes on changed media.
[17180976.168000] VFS: busy inodes on changed media.
[17180976.172000] (scsi4:A:4:0): No or incomplete CDB sent to device.
[17180976.172000] scsi4: Issued Channel A Bus Reset. 1 SCBs aborted
[17180976.388000] (scsi4:A:4:0): No or incomplete CDB sent to device.
[17180976.388000] (scsi4:A:4:0): Protocol violation in Message-in phase. 
Attempting to abort.
[17180976.388000] (scsi4:A:4:0): Unexpected busfree in Message-in phase, 1 SCBs
aborted, PRGMCNT == 0x199
[17180976.388000] >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
[17180976.388000] scsi4: Dumping Card State at program address 0x197 Mode 0x11
[17180976.388000] Card was paused
[17180976.388000] HS_MAILBOX[0x0] INTCTL[0x80]:(SWTMINTMASK)
[17180976.388000] SEQINTSTAT[0x0] SAVED_MODE[0x11]
[17180976.388000] DFFSTAT[0x13]:(CURRFIFO_NONE|FIFO0FREE)
[17180976.388000] SCSISIGI[0x0]:(P_DATAOUT) SCSIPHASE[0x0]
[17180976.388000] SCSIBUS[0x0] LASTPHASE[0xe0]:(P_MESGIN)
[17180976.388000] SCSISEQ0[0x0] SCSISEQ1[0x12]:(ENAUTOATNP|ENRSELI)
[17180976.388000] SEQCTL0[0x0] SEQINTCTL[0x0] SEQ_FLAGS[0x40]:(NO_CDB_SENT)
[17180976.388000] SEQ_FLAGS2[0x0] SSTAT0[0x0] SSTAT1[0x8]:(BUSFREE)
[17180976.388000] SSTAT2[0xc0]:(BUSFREE_DFF1) SSTAT3[0x0]
[17180976.388000] PERRDIAG[0xc0]:(HIPERR|HIZERO)
SIMODE1[0xac]:(ENSCSIPERR|ENBUSFREE|ENSCSIRST|ENSELTIMO)
[17180976.388000] LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0]
[17180976.388000] LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0x0]
[17180976.388000]
[17180976.388000] SCB Count = 4 CMDS_PENDING = 1 LASTSCB 0xffff CURRSCB 0x3
NEXTSCB 0x0
[17180976.388000] qinstart = 2788 qinfifonext = 2788
[17180976.388000] QINFIFO:
[17180976.388000] WAITING_TID_QUEUES:
[17180976.388000] Pending list:
[17180976.388000] Total 0
[17180976.388000] Kernel Free SCB list: 3 2 1 0
[17180976.388000] Sequencer Complete DMA-inprog list:
[17180976.388000] Sequencer Complete list:
[17180976.388000] Sequencer DMA-Up and Complete list:
[17180976.388000]
[17180976.388000] scsi4: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0
[17180976.388000]
SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS)
[17180976.388000] SEQINTSRC[0x0] DFCNTRL[0x0]
DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL)
[17180976.388000] SG_CACHE_SHADOW[0x2]:(LAST_SEG)
[17180976.388000] SG_STATE[0x0] DFFSXFRCTL[0x0] SOFFCNT[0x0]
[17180976.388000] MDFFSTAT[0x5]:(FIFOFREE|DLZERO) SHADDR = 0x00, SHCNT = 0x0
[17180976.388000] HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL)
[17180976.388000] scsi4: FIFO1 Active, LONGJMP == 0x8063, SCB 0x3
[17180976.388000]
SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS)
[17180976.388000] SEQINTSRC[0x0] DFCNTRL[0x4]:(DIRECTION)
[17180976.388000] DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL)
[17180976.388000] SG_CACHE_SHADOW[0x2]:(LAST_SEG)
[17180976.388000] SG_STATE[0x0] DFFSXFRCTL[0x0] SOFFCNT[0x0]
[17180976.388000] MDFFSTAT[0xc]:(DLZERO|SHVALID) SHADDR = 0x0a, SHCNT = 0x2
[17180976.388000] HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL)
[17180976.388000] LQIN: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
0x0 0x0 0x0 0x0 0x0 0x0
[17180976.388000] scsi4: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52
[17180976.388000] scsi4: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0
[17180976.388000]
[17180976.388000] SIMODE0[0xc]:(ENOVERRUN|ENIOERR)
[17180976.388000] CCSCBCTL[0x4]:(CCSCBDIR)
[17180976.388000] scsi4: REG0 == 0x3, SINDEX = 0x103, DINDEX = 0xe1
[17180976.388000] scsi4: SCBPTR == 0x3, SCB_NEXT == 0xffc0, SCB_NEXT2 == 0xffba
[17180976.388000] CDB 4a 1 0 0 10 0
[17180976.388000] STACK: 0xc9 0x0 0x0 0x0 0x0 0x0 0x0 0x0
[17180976.388000] <<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
[17180976.388000] (scsi4:A:4:0): No or incomplete CDB sent to device.
[17180976.388000] scsi4: Issued Channel A Bus Reset. 1 SCBs aborted
[17180976.400000] sr 4:0:4:0: SCSI error: return code = 0x70000

-- 
Configure bugmail: http://bugzilla.ubuntu.com/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the QA contact for the bug, or are watching the QA contact.