[Bug 15054] Breezy Installation : Network cannot be configured automatically

[bugzilla-daemon at bugzilla.ubuntu.com]

Please do not reply to this email.  You can add comments at
http://bugzilla.ubuntu.com/show_bug.cgi?id=15054
Ubuntu | linux





------- Additional Comments From getaceres at gmail.com  2005-09-22 20:20 UTC -------
This is the output:

jose at ubuntu:~$ sudo mii-diag eth0
Password:
Basic registers of MII PHY #24:  1100 182d 0000 0000 0061 0020 c000 0000.
 Basic mode control register 0x1100: Auto-negotiation enabled.
 You have link beat, and everything is working OK.
 Your link partner is generating 10baseT link beat  (no autonegotiation).
   End of basic transceiver information.

The /var/log/installer/syslog is attached in the following message.
I made some installations:
On the first I got the DHCP timeot but in the next screen I selected to retry
giving the IP direction of the DHCP server and it worked. The problem is that,
after rebooting the network was not configured again. Then I upgraded the system
and I got the udev breakage of yesterday.
In the next install, I got the timeout again but this time, when prompted, I
selected to configure the network manually. This time it worked and after
rebooting my configuration was saved and I got connection with the network.

Today, that time in the network config dialog, I selected DHCP in the
configuration only to prove what happens. The result is that it took more than
one minute to reboot the network card with the new configuration, but in the
end, it worked. Anyway, due to the delay of DHCP I configured the network again
manually and it took a few seconds to reboot the network card.
That delay didn't happen in Hoary or Debian Sid, so It's not a server problem,
but a client problem.


-- 
Configure bugmail: http://bugzilla.ubuntu.com/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the QA contact for the bug, or are watching the QA contact.