[Bug 14147] ndiswrapper freezes on boot while searching

Thu Sep 22 20:31:22 UTC 2005

Please do not reply to this email.  You can add comments at
http://bugzilla.ubuntu.com/show_bug.cgi?id=14147
Ubuntu | linux

spayne at evolutioncolt.com changed:

           What    |Removed                     |Added
----------------------------------------------------------------------------
           Severity|normal                      |critical

------- Additional Comments From spayne at evolutioncolt.com  2005-09-22 21:31 UTC -------
My /var/log/kern.log:

Sep 22 21:21:13 amarillo kernel: Inspecting /boot/System.map-2.6.12-8-686
Sep 22 21:21:13 amarillo kernel: Loaded 28222 symbols from
/boot/System.map-2.6.12-8-686.
Sep 22 21:21:13 amarillo kernel: Symbols match kernel version 2.6.12.
Sep 22 21:21:13 amarillo kernel: No module symbols loaded - kernel modules not
enabled. 
Sep 22 21:21:13 amarillo kernel: upt Link [LNK0] (IRQs 5 7 10 *11)
Sep 22 21:21:13 amarillo kernel: [4294668.115000] ACPI: PCI Interrupt Link
[LNK1] (IRQs 5 7 *10 11)
Sep 22 21:21:13 amarillo kernel: [4294668.116000] ACPI: PCI Interrupt Link
[LNK2] (IRQs 5 7 10 *11)
Sep 22 21:21:13 amarillo kernel: [4294668.116000] ACPI: PCI Interrupt Link
[LNK3] (IRQs *5 7 10 11)
Sep 22 21:21:13 amarillo kernel: [4294668.117000] ACPI: Embedded Controller
[EC0] (gpe 7)
Sep 22 21:21:13 amarillo kernel: [4294668.126000] ACPI: Power Resource [PUT2] (on)
Sep 22 21:21:13 amarillo kernel: [4294668.126000] ACPI: PCI Interrupt Routing
Table [\_SB_.PCI0.P2P_._PRT]
Sep 22 21:21:14 amarillo kernel: [4294668.127000] ACPI: Power Resource [PFA1] (off)
Sep 22 21:21:14 amarillo kernel: [4294668.127000] Linux Plug and Play Support
v0.97 (c) Adam Belay
Sep 22 21:21:14 amarillo kernel: [4294668.127000] pnp: PnP ACPI init
Sep 22 21:21:14 amarillo kernel: [4294668.130000] pnp: PnP ACPI: found 11 devices
Sep 22 21:21:14 amarillo kernel: [4294668.130000] PnPBIOS: Disabled by ACPI PNP
Sep 22 21:21:14 amarillo kernel: [4294668.131000] PCI: Using ACPI for IRQ routing
Sep 22 21:21:14 amarillo kernel: [4294668.131000] PCI: If a device doesn't work,
try "pci=routeirq".  If it helps, post a report
Sep 22 21:21:14 amarillo kernel: [4294668.133000] pnp: 00:06: ioport range
0x200-0x20f has been reserved
Sep 22 21:21:14 amarillo kernel: [4294668.133000] pnp: 00:06: ioport range
0x280-0x29f has been reserved
Sep 22 21:21:14 amarillo kernel: [4294668.133000] pnp: 00:06: ioport range
0x40b-0x40b has been reserved
Sep 22 21:21:14 amarillo kernel: [4294668.133000] Simple Boot Flag at 0x37 set
to 0x1
Sep 22 21:21:14 amarillo kernel: [4294668.134000] audit: initializing netlink
socket (disabled)
Sep 22 21:21:14 amarillo kernel: [4294668.134000] audit: initialized
Sep 22 21:21:14 amarillo kernel: [4294668.134000] VFS: Disk quotas dquot_6.5.1
Sep 22 21:21:14 amarillo kernel: [4294668.134000] Dquot-cache hash table
entries: 1024 (order 0, 4096 bytes)
Sep 22 21:21:14 amarillo kernel: [4294668.134000] devfs: 2004-01-31 Richard
Gooch (rgooch at atnf.csiro.au)
Sep 22 21:21:14 amarillo kernel: [4294668.134000] devfs: boot_options: 0x0
Sep 22 21:21:14 amarillo kernel: [4294668.134000] Initializing Cryptographic API
Sep 22 21:21:14 amarillo kernel: [4294668.134000] isapnp: Scanning for PnP cards...
Sep 22 21:21:14 amarillo kernel: [4294668.487000] isapnp: No Plug & Play device
found
Sep 22 21:21:14 amarillo kernel: [4294668.519000] PNP: PS/2 Controller
[PNP0303:KBC0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
Sep 22 21:21:14 amarillo kernel: [4294668.522000] serio: i8042 AUX port at
0x60,0x64 irq 12
Sep 22 21:21:14 amarillo kernel: [4294668.522000] serio: i8042 KBD port at
0x60,0x64 irq 1
Sep 22 21:21:14 amarillo kernel: [4294668.522000] Serial: 8250/16550 driver
$Revision: 1.90 $ 48 ports, IRQ sharing enabled
Sep 22 21:21:14 amarillo kernel: [4294668.523000] ttyS2 at I/O 0x3e8 (irq = 4)
is a 16550A
Sep 22 21:21:14 amarillo kernel: [4294668.526000] ACPI: PCI Interrupt
0000:00:14.6[B] -> GSI 17 (level, low) -> IRQ 17
Sep 22 21:21:14 amarillo kernel: [4294668.526000] ACPI: PCI interrupt for device
0000:00:14.6 disabled
Sep 22 21:21:14 amarillo kernel: [4294668.526000] io scheduler noop registered
Sep 22 21:21:14 amarillo kernel: [4294668.526000] io scheduler anticipatory
registered
Sep 22 21:21:14 amarillo kernel: [4294668.526000] io scheduler deadline registered
Sep 22 21:21:14 amarillo kernel: [4294668.526000] io scheduler cfq registered
Sep 22 21:21:14 amarillo kernel: [4294668.526000] RAMDISK driver initialized: 16
RAM disks of 8192K size 1024 blocksize
Sep 22 21:21:14 amarillo kernel: [4294668.526000] NET: Registered protocol family 2
Sep 22 21:21:14 amarillo kernel: [4294668.536000] IP: routing cache hash table
of 8192 buckets, 64Kbytes
Sep 22 21:21:14 amarillo kernel: [4294668.536000] TCP established hash table
entries: 131072 (order: 8, 1048576 bytes)
Sep 22 21:21:14 amarillo kernel: [4294668.538000] TCP bind hash table entries:
65536 (order: 6, 262144 bytes)
Sep 22 21:21:14 amarillo kernel: [4294668.538000] TCP: Hash tables configured
(established 131072 bind 65536)
Sep 22 21:21:14 amarillo kernel: [4294668.539000] NET: Registered protocol family 8
Sep 22 21:21:14 amarillo kernel: [4294668.539000] NET: Registered protocol family 20
Sep 22 21:21:14 amarillo kernel: [4294668.539000] ACPI wakeup devices: 
Sep 22 21:21:14 amarillo kernel: [4294668.539000]  LID USB0 USB1 USB2 MC97  P2P
LAN0 
Sep 22 21:21:14 amarillo kernel: [4294668.539000] ACPI: (supports S0 S3 S4 S5)
Sep 22 21:21:14 amarillo kernel: [4294668.539000] Freeing unused kernel memory:
168k freed
Sep 22 21:21:14 amarillo kernel: [4294668.558000] input: AT Translated Set 2
keyboard on isa0060/serio0
Sep 22 21:21:14 amarillo kernel: [4294668.575000] Capability LSM initialized
Sep 22 21:21:14 amarillo kernel: [4294668.592000] NET: Registered protocol family 1
Sep 22 21:21:14 amarillo kernel: [4294668.617000] usbcore: registered new driver
usbfs
Sep 22 21:21:14 amarillo kernel: [4294668.617000] usbcore: registered new driver hub
Sep 22 21:21:14 amarillo kernel: [4294668.618000] ohci_hcd: 2004 Nov 08 USB 1.1
'Open' Host Controller (OHCI) Driver (PCI)
Sep 22 21:21:14 amarillo kernel: [4294668.618000] ACPI: PCI Interrupt
0000:00:13.0[A] -> GSI 19 (level, low) -> IRQ 19
Sep 22 21:21:14 amarillo kernel: [4294668.618000] ohci_hcd 0000:00:13.0: ATI
Technologies Inc OHCI USB Controller #1
Sep 22 21:21:14 amarillo kernel: [4294668.618000] ohci_hcd 0000:00:13.0: new USB
bus registered, assigned bus number 1
Sep 22 21:21:14 amarillo kernel: [4294668.618000] ohci_hcd 0000:00:13.0: irq 19,
io mem 0xf0001000
Sep 22 21:21:14 amarillo kernel: [4294668.633000] hub 1-0:1.0: USB hub found
Sep 22 21:21:14 amarillo kernel: [4294668.633000] hub 1-0:1.0: 3 ports detected
Sep 22 21:21:14 amarillo kernel: [4294668.638000] ACPI: PCI Interrupt
0000:00:13.1[A] -> GSI 19 (level, low) -> IRQ 19
Sep 22 21:21:14 amarillo kernel: [4294668.638000] ohci_hcd 0000:00:13.1: ATI
Technologies Inc OHCI USB Controller #2
Sep 22 21:21:14 amarillo kernel: [4294668.638000] ohci_hcd 0000:00:13.1: new USB
bus registered, assigned bus number 2
Sep 22 21:21:14 amarillo kernel: [4294668.638000] ohci_hcd 0000:00:13.1: irq 19,
io mem 0xf0002000
Sep 22 21:21:14 amarillo kernel: [4294668.693000] hub 2-0:1.0: USB hub found
Sep 22 21:21:14 amarillo kernel: [4294668.693000] hub 2-0:1.0: 3 ports detected
Sep 22 21:21:14 amarillo kernel: [4294668.714000] PCI: Enabling device
0000:00:13.2 (0000 -> 0002)
Sep 22 21:21:14 amarillo kernel: [4294668.714000] ACPI: PCI Interrupt
0000:00:13.2[A] -> GSI 19 (level, low) -> IRQ 19
Sep 22 21:21:14 amarillo kernel: [4294668.714000] ehci_hcd 0000:00:13.2: ATI
Technologies Inc EHCI USB Controller
Sep 22 21:21:14 amarillo kernel: [4294668.714000] ehci_hcd 0000:00:13.2: new USB
bus registered, assigned bus number 3
Sep 22 21:21:14 amarillo kernel: [4294668.714000] ehci_hcd 0000:00:13.2: irq 19,
io mem 0x2c000000
Sep 22 21:21:14 amarillo kernel: [4294668.714000] ehci_hcd 0000:00:13.2: USB 2.0
initialized, EHCI 1.00, driver 10 Dec 2004
Sep 22 21:21:14 amarillo kernel: [4294668.714000] hub 3-0:1.0: USB hub found
Sep 22 21:21:14 amarillo kernel: [4294668.714000] hub 3-0:1.0: 6 ports detected
Sep 22 21:21:14 amarillo kernel: [4294668.752000] Uniform Multi-Platform E-IDE
driver Revision: 7.00alpha2
Sep 22 21:21:14 amarillo kernel: [4294668.752000] ide: Assuming 33MHz system bus
speed for PIO modes; override with idebus=xx
Sep 22 21:21:14 amarillo kernel: [4294668.752000] ACPI: bus type ide registered
Sep 22 21:21:14 amarillo kernel: [4294668.806000] 8139cp: 10/100 PCI Ethernet
driver v1.2 (Mar 22, 2004)
Sep 22 21:21:14 amarillo kernel: [4294668.806000] 8139cp: pci dev 0000:02:07.0
(id 10ec:8139 rev 10) is not an 8139C+ compatible chip
Sep 22 21:21:14 amarillo kernel: [4294668.806000] 8139cp: Try the "8139too"
driver instead.
Sep 22 21:21:14 amarillo kernel: [4294668.808000] 8139too Fast Ethernet driver
0.9.27
Sep 22 21:21:14 amarillo kernel: [4294668.808000] ACPI: PCI Interrupt
0000:02:07.0[A] -> GSI 18 (level, low) -> IRQ 18
Sep 22 21:21:14 amarillo kernel: [4294668.808000] eth0: RealTek RTL8139 at
0xa000, 00:a0:d1:b8:1a:7a, IRQ 18
Sep 22 21:21:14 amarillo kernel: [4294668.808000] eth0:  Identified 8139 chip
type 'RTL-8100B/8139D'
Sep 22 21:21:14 amarillo kernel: [4294668.989000] usb 3-3: new high speed USB
device using ehci_hcd and address 2
Sep 22 21:21:14 amarillo kernel: [4294670.852000] ATIIXP: IDE controller at PCI
slot 0000:00:14.1
Sep 22 21:21:14 amarillo kernel: [4294670.852000] ACPI: PCI Interrupt
0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 16
Sep 22 21:21:14 amarillo kernel: [4294670.852000] ATIIXP: chipset revision 0
Sep 22 21:21:14 amarillo kernel: [4294670.852000] ATIIXP: not 100%% native mode:
will probe irqs later
Sep 22 21:21:14 amarillo kernel: [4294670.852000]     ide0: BM-DMA at
0x8070-0x8077, BIOS settings: hda:DMA, hdb:pio
Sep 22 21:21:14 amarillo kernel: [4294670.852000]     ide1: BM-DMA at
0x8078-0x807f, BIOS settings: hdc:DMA, hdd:pio
Sep 22 21:21:14 amarillo kernel: [4294670.852000] Probing IDE interface ide0...
Sep 22 21:21:14 amarillo kernel: [4294671.167000] hda: FUJITSU MHT2040AT, ATA
DISK drive
Sep 22 21:21:14 amarillo kernel: [4294671.780000] ide0 at 0x1f0-0x1f7,0x3f6 on
irq 14
Sep 22 21:21:14 amarillo kernel: [4294671.780000] Probing IDE interface ide1...
Sep 22 21:21:14 amarillo kernel: [4294672.452000] hdc: MATSHITADVD-RAM UJ-820S,
ATAPI CD/DVD-ROM drive
Sep 22 21:21:14 amarillo kernel: [4294672.758000] ide1 at 0x170-0x177,0x376 on
irq 15
Sep 22 21:21:14 amarillo kernel: [4294672.758000] ide2: I/O resource 0x3EE-0x3EE
not free.
Sep 22 21:21:14 amarillo kernel: [4294672.758000] ide2: ports already in use,
skipping probe
Sep 22 21:21:14 amarillo kernel: [4294672.758000] Probing IDE interface ide3...
Sep 22 21:21:14 amarillo kernel: [4294673.271000] Probing IDE interface ide4...
Sep 22 21:21:14 amarillo kernel: [4294673.784000] Probing IDE interface ide5...
Sep 22 21:21:14 amarillo kernel: [4294674.300000] hda: max request size: 128KiB
Sep 22 21:21:14 amarillo kernel: [4294674.365000] hda: 78140160 sectors (40007
MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100)
Sep 22 21:21:14 amarillo kernel: [4294674.367000] hda: cache flushes supported
Sep 22 21:21:14 amarillo kernel: [4294674.367000] 
/dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 >
Sep 22 21:21:14 amarillo kernel: [4294674.410000] hdc: ATAPI 24X DVD-ROM
DVD-R-RAM CD-R/RW drive, 2048kB Cache
Sep 22 21:21:14 amarillo kernel: [4294674.410000] Uniform CD-ROM driver
Revision: 3.20
Sep 22 21:21:14 amarillo kernel: [4294674.962000] ACPI: Fan [FAN1] (off)
Sep 22 21:21:14 amarillo kernel: [4294674.965000] ACPI: CPU0 (power states:
C1[C1] C2[C2])
Sep 22 21:21:14 amarillo kernel: [4294674.996000] ACPI: Thermal Zone [THZN] (46 C)
Sep 22 21:21:14 amarillo kernel: [4294675.108000] Attempting manual resume
Sep 22 21:21:14 amarillo kernel: [4294675.135000] swsusp: Suspend partition has
wrong signature?
Sep 22 21:21:14 amarillo kernel: [4294675.169000] kjournald starting.  Commit
interval 5 seconds
Sep 22 21:21:14 amarillo kernel: [4294675.169000] EXT3-fs: mounted filesystem
with ordered data mode.
Sep 22 21:21:14 amarillo kernel: [4294677.211000] md: md driver 0.90.1
MAX_MD_DEVS=256, MD_SB_DISKS=27
Sep 22 21:21:14 amarillo kernel: [4294681.247000] Adding 1622524k swap on
/dev/hda5.  Priority:-1 extents:1
Sep 22 21:21:14 amarillo kernel: [4294681.472000] EXT3 FS on hda1, internal journal
Sep 22 21:21:14 amarillo kernel: [4294690.170000] parport: PnPBIOS parport detected.
Sep 22 21:21:14 amarillo kernel: [4294690.170000] parport0: PC-style at 0x378
(0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
Sep 22 21:21:14 amarillo kernel: [4294690.255000] lp0: using parport0
(interrupt-driven).
Sep 22 21:21:14 amarillo kernel: [4294690.270000] mice: PS/2 mouse device common
for all mice
Sep 22 21:21:14 amarillo kernel: [4294690.299000] ieee1394: Initialized config
rom entry `ip1394'
Sep 22 21:21:14 amarillo kernel: [4294690.304000] SCSI subsystem initialized
Sep 22 21:21:14 amarillo kernel: [4294690.307000] sbp2: $Rev: 1219 $ Ben Collins
<bcollins at debian.org>
Sep 22 21:21:14 amarillo kernel: [4294690.332000] ndiswrapper version 1.1 loaded
(preempt=no,smp=no)
Sep 22 21:21:14 amarillo kernel: [4294690.413000] ndiswrapper: driver netrtusb
(D-Link,04/01/2004, 1.00.00.0000) loaded
Sep 22 21:21:14 amarillo kernel: [4294690.586000] usb 3-3: reset high speed USB
device using ehci_hcd and address 2
Sep 22 21:21:14 amarillo kernel: [4294690.844000] usb 3-3: reset high speed USB
device using ehci_hcd and address 2
Sep 22 21:21:14 amarillo kernel: [4294690.982000] Synaptics Touchpad, model: 1,
fw: 5.9, id: 0xa56eb1, caps: 0x804713/0x0
Sep 22 21:21:14 amarillo kernel: [4294690.986000] input: SynPS/2 Synaptics
TouchPad on isa0060/serio1
Sep 22 21:21:14 amarillo kernel: [4294691.102000] usb 3-3: reset high speed USB
device using ehci_hcd and address 2
Sep 22 21:21:14 amarillo kernel: [4294691.360000] usb 3-3: reset high speed USB
device using ehci_hcd and address 2
Sep 22 21:21:14 amarillo kernel: [4294691.618000] usb 3-3: reset high speed USB
device using ehci_hcd and address 2
Sep 22 21:21:14 amarillo kernel: [4294691.876000] usb 3-3: reset high speed USB
device using ehci_hcd and address 2
Sep 22 21:21:14 amarillo kernel: [4294692.134000] usb 3-3: reset high speed USB
device using ehci_hcd and address 2
Sep 22 21:21:14 amarillo kernel: [4294692.392000] usb 3-3: reset high speed USB
device using ehci_hcd and address 2
Sep 22 21:21:14 amarillo kernel: [4294692.650000] usb 3-3: reset high speed USB
device using ehci_hcd and address 2
Sep 22 21:21:14 amarillo kernel: [4294692.908000] usb 3-3: reset high speed USB
device using ehci_hcd and address 2
Sep 22 21:21:14 amarillo kernel: [4294693.166000] usb 3-3: reset high speed USB
device using ehci_hcd and address 2
Sep 22 21:21:14 amarillo kernel: [4294693.424000] usb 3-3: reset high speed USB
device using ehci_hcd and address 2
Sep 22 21:21:14 amarillo kernel: [4294693.682000] usb 3-3: reset high speed USB
device using ehci_hcd and address 2
Sep 22 21:21:14 amarillo kernel: [4294693.940000] usb 3-3: reset high speed USB
device using ehci_hcd and address 2
Sep 22 21:21:14 amarillo kernel: [4294694.198000] usb 3-3: reset high speed USB
device using ehci_hcd and address 2
Sep 22 21:21:14 amarillo kernel: [4294694.456000] usb 3-3: reset high speed USB
device using ehci_hcd and address 2
Sep 22 21:21:14 amarillo kernel: [4294694.714000] usb 3-3: reset high speed USB
device using ehci_hcd and address 2
Sep 22 21:21:14 amarillo kernel: [4294694.972000] usb 3-3: reset high speed USB
device using ehci_hcd and address 2
Sep 22 21:21:14 amarillo kernel: [4294695.230000] usb 3-3: reset high speed USB
device using ehci_hcd and address 2
Sep 22 21:21:14 amarillo kernel: [4294695.488000] usb 3-3: reset high speed USB
device using ehci_hcd and address 2
Sep 22 21:21:14 amarillo kernel: [4294695.746000] usb 3-3: reset high speed USB
device using ehci_hcd and address 2
Sep 22 21:21:14 amarillo kernel: [4294696.004000] usb 3-3: reset high speed USB
device using ehci_hcd and address 2
Sep 22 21:21:14 amarillo kernel: [4294696.262000] usb 3-3: reset high speed USB
device using ehci_hcd and address 2
Sep 22 21:21:14 amarillo kernel: [4294696.520000] usb 3-3: reset high speed USB
device using ehci_hcd and address 2
Sep 22 21:21:14 amarillo kernel: [4294696.778000] usb 3-3: reset high speed USB
device using ehci_hcd and address 2
Sep 22 21:21:14 amarillo kernel: [4294697.036000] usb 3-3: reset high speed USB
device using ehci_hcd and address 2
Sep 22 21:21:14 amarillo kernel: [4294697.294000] usb 3-3: reset high speed USB
device using ehci_hcd and address 2
Sep 22 21:21:14 amarillo kernel: [4294697.552000] usb 3-3: reset high speed USB
device using ehci_hcd and address 2
Sep 22 21:21:14 amarillo kernel: [4294697.810000] usb 3-3: reset high speed USB
device using ehci_hcd and address 2
Sep 22 21:21:14 amarillo kernel: [4294698.068000] usb 3-3: reset high speed USB
device using ehci_hcd and address 2
Sep 22 21:21:14 amarillo kernel: [4294698.326000] usb 3-3: reset high speed USB
device using ehci_hcd and address 2
Sep 22 21:21:14 amarillo kernel: [4294698.584000] usb 3-3: reset high speed USB
device using ehci_hcd and address 2
Sep 22 21:21:14 amarillo kernel: [4294698.842000] usb 3-3: reset high speed USB
device using ehci_hcd and address 2
Sep 22 21:21:14 amarillo kernel: [4294699.242000] ndiswrapper
(usb_reset_port:633): usb_reset_device() = -19
Sep 22 21:21:14 amarillo kernel: [4294699.242000] ndiswrapper
(usb_reset_port:633): usb_reset_device() = -22
Sep 22 21:21:14 amarillo kernel: [4294699.242000] ndiswrapper
(ndiswrapper_add_one_usb_dev:312): Windows driver couldn't initialize the device
(C0000001)
Sep 22 21:21:14 amarillo kernel: [4294699.242000] ndiswrapper: probe of 3-3:1.0
failed with error -22
Sep 22 21:21:14 amarillo kernel: [4294699.242000] usbcore: registered new driver
ndiswrapper
Sep 22 21:21:14 amarillo kernel: [4294699.242000] usb 3-3: USB disconnect, address 2
Sep 22 21:21:14 amarillo kernel: [4294700.805000] hub 3-0:1.0: connect-debounce
failed, port 3 disabled
Sep 22 21:21:14 amarillo kernel: [4294700.805000] hub 3-0:1.0: over-current
change on port 2
Sep 22 21:21:14 amarillo kernel: [4294701.003000] usb 1-3: new full speed USB
device using ohci_hcd and address 2
Sep 22 21:21:14 amarillo kernel: [4294701.137000] usb 1-3: not running at top
speed; connect to a high speed hub
Sep 22 21:21:14 amarillo kernel: [4294701.545000] device-mapper: 4.4.0-ioctl
(2005-01-12) initialised: dm-devel at redhat.com
Sep 22 21:21:14 amarillo kernel: [4294702.391000] cdrom: open failed.
Sep 22 21:21:14 amarillo kernel: [4294704.807000] Linux agpgart interface v0.101
(c) Dave Jones
Sep 22 21:21:14 amarillo kernel: [4294704.820000] agpgart: Detected Ati
IGP7000/M chipset
Sep 22 21:21:14 amarillo kernel: [4294704.841000] agpgart: AGP aperture is 64M @
0xb0000000
Sep 22 21:21:14 amarillo kernel: [4294704.954000] pci_hotplug: PCI Hot Plug PCI
Core version: 0.5
Sep 22 21:21:14 amarillo kernel: [4294704.965000] wlan0: ndiswrapper ethernet
device 00:11:95:8d:36:a7 using driver netrtusb, configuration file 2001:3C00.0.conf
Sep 22 21:21:14 amarillo kernel: [4294704.969000] shpchp:
acpi_shpchprm:\_SB_.PCI0 evaluate _BBN fail=0x5
Sep 22 21:21:14 amarillo kernel: [4294704.969000] shpchp:
acpi_shpchprm:get_device PCI ROOT HID fail=0x5
Sep 22 21:21:14 amarillo kernel: [4294705.074000] wlan0: encryption modes
supported: WEP, WPA with TKIP, WPA with AES/CCMP
Sep 22 21:21:14 amarillo kernel: [4294705.658000] ACPI: PCI Interrupt
0000:00:14.5[B] -> GSI 17 (level, low) -> IRQ 17
Sep 22 21:21:14 amarillo kernel: [4294705.659000] atiixp: codec reset timeout
Sep 22 21:21:14 amarillo kernel: [4294706.818000] ACPI: PCI Interrupt
0000:00:14.6[B] -> GSI 17 (level, low) -> IRQ 17
Sep 22 21:21:14 amarillo kernel: [4294707.094000] Linux Kernel Card Services
Sep 22 21:21:14 amarillo kernel: [4294707.094000]   options:  [pci] [cardbus] [pm]
Sep 22 21:21:14 amarillo kernel: [4294707.114000] ACPI: PCI Interrupt
0000:02:06.0[A] -> GSI 19 (level, low) -> IRQ 19
Sep 22 21:21:14 amarillo kernel: [4294707.114000] Yenta: CardBus bridge found at
0000:02:06.0 [1179:ff10]
Sep 22 21:21:14 amarillo kernel: [4294707.114000] Yenta: Enabling burst memory
read transactions
Sep 22 21:21:14 amarillo kernel: [4294707.114000] Yenta: Using CSCINT to route
CSC interrupts to PCI
Sep 22 21:21:14 amarillo kernel: [4294707.114000] Yenta: Routing CardBus
interrupts to PCI
Sep 22 21:21:14 amarillo kernel: [4294707.114000] Yenta TI: socket 0000:02:06.0,
mfunc 0x01111122, devctl 0x64
Sep 22 21:21:14 amarillo kernel: [4294707.335000] Yenta: ISA IRQ mask 0x0c78,
PCI irq 19
Sep 22 21:21:14 amarillo kernel: [4294707.335000] Socket status: 30000006
Sep 22 21:21:14 amarillo kernel: [4294707.336000] ndiswrapper
(usb_submit_nt_urb:612): usb_reset_pipe() = -110
Sep 22 21:21:14 amarillo kernel: [4294707.542000] ndiswrapper
(usb_reset_port:633): usb_reset_device() = -19
Sep 22 21:21:14 amarillo kernel: [4294707.589000] usb 1-3: USB disconnect, address 2
Sep 22 21:21:14 amarillo kernel: [4294707.597000] ndiswrapper: device wlan0 removed
Sep 22 21:21:14 amarillo kernel: [4294707.618000] ohci1394: $Rev: 1250 $ Ben
Collins <bcollins at debian.org>
Sep 22 21:21:14 amarillo kernel: [4294707.618000] ACPI: PCI Interrupt
0000:02:0a.0[A] -> GSI 19 (level, low) -> IRQ 19
Sep 22 21:21:14 amarillo kernel: [4294707.676000] ohci1394: fw-host0: OHCI-1394
1.1 (PCI): IRQ=[19]  MMIO=[d0000000-d00007ff]  Max Packet=[2048]
Sep 22 21:21:14 amarillo kernel: [4294708.939000] ieee1394: Host added:
ID:BUS[0-00:1023]  GUID[00080da0d1b81a7a]
Sep 22 21:21:14 amarillo kernel: [4294708.985000] hub 3-0:1.0: over-current
change on port 2
Sep 22 21:21:14 amarillo kernel: [4294709.154000] Real Time Clock Driver v1.12
Sep 22 21:21:14 amarillo kernel: [4294709.172000] usb 3-3: new high speed USB
device using ehci_hcd and address 3
Sep 22 21:21:14 amarillo kernel: [4294709.245000] input: PC Speaker
Sep 22 21:21:14 amarillo kernel: [4294709.587000] usb 3-3: reset high speed USB
device using ehci_hcd and address 3
Sep 22 21:21:14 amarillo kernel: [4294709.845000] usb 3-3: reset high speed USB
device using ehci_hcd and address 3
Sep 22 21:21:14 amarillo kernel: [4294709.888000] ts: Compaq touchscreen
protocol output
Sep 22 21:21:14 amarillo kernel: [4294710.105000] usb 3-3: reset high speed USB
device using ehci_hcd and address 3
Sep 22 21:21:14 amarillo kernel: [4294710.363000] usb 3-3: reset high speed USB
device using ehci_hcd and address 3
Sep 22 21:21:14 amarillo kernel: [4294710.642000] usb 3-3: reset high speed USB
device using ehci_hcd and address 3
Sep 22 21:21:14 amarillo kernel: [4294710.900000] usb 3-3: reset high speed USB
device using ehci_hcd and address 3
Sep 22 21:21:14 amarillo kernel: [4294711.019000] eth0: link down
Sep 22 21:21:14 amarillo kernel: [4294711.118000] NET: Registered protocol family 17
Sep 22 21:21:14 amarillo kernel: [4294711.158000] usb 3-3: reset high speed USB
device using ehci_hcd and address 3
Sep 22 21:21:14 amarillo kernel: [4294711.416000] usb 3-3: reset high speed USB
device using ehci_hcd and address 3
Sep 22 21:21:14 amarillo kernel: [4294711.676000] usb 3-3: reset high speed USB
device using ehci_hcd and address 3
Sep 22 21:21:14 amarillo kernel: [4294711.936000] usb 3-3: reset high speed USB
device using ehci_hcd and address 3
Sep 22 21:21:14 amarillo kernel: [4294712.194000] usb 3-3: reset high speed USB
device using ehci_hcd and address 3
Sep 22 21:21:14 amarillo kernel: [4294712.308000] ACPI: AC Adapter [AC] (off-line)
Sep 22 21:21:14 amarillo kernel: [4294712.373000] ACPI: Battery Slot [BAT1]
(battery present)
Sep 22 21:21:14 amarillo kernel: [4294712.399000] ACPI: Power Button (FF) [PWRF]
Sep 22 21:21:14 amarillo kernel: [4294712.399000] ACPI: Lid Switch [LID]
Sep 22 21:21:14 amarillo kernel: [4294712.399000] ACPI: Power Button (CM) [PWRB]
Sep 22 21:21:14 amarillo kernel: [4294712.454000] usb 3-3: reset high speed USB
device using ehci_hcd and address 3
Sep 22 21:21:14 amarillo kernel: [4294712.503000] Using specific hotkey driver
Sep 22 21:21:14 amarillo kernel: [4294712.551000] ibm_acpi: ec object not found
Sep 22 21:21:16 amarillo kernel: [4294715.815000] wlan0: ndiswrapper ethernet
device 00:11:95:8d:36:a7 using driver netrtusb, configuration file 2001:3C00.0.conf
Sep 22 21:21:16 amarillo kernel: [4294715.815000] wlan0: encryption modes
supported: WEP, WPA with TKIP, WPA with AES/CCMP
Sep 22 21:21:19 amarillo kernel: [4294718.830000] [drm] Initialized drm 1.0.0
20040925
Sep 22 21:21:19 amarillo kernel: [4294718.834000] ACPI: PCI Interrupt
0000:01:05.0[A] -> GSI 16 (level, low) -> IRQ 16
Sep 22 21:21:19 amarillo kernel: [4294718.837000] [drm] Initialized radeon
1.16.0 20050311 on minor 0: ATI Technologies Inc Radeon Mobility 7000 IGP
Sep 22 21:21:19 amarillo kernel: [4294718.838000] agpgart: Found an AGP 2.0
compliant device at 0000:00:00.0.
Sep 22 21:21:19 amarillo kernel: [4294718.838000] agpgart: Putting AGP V2 device
at 0000:00:00.0 into 4x mode
Sep 22 21:21:19 amarillo kernel: [4294718.838000] agpgart: Putting AGP V2 device
at 0000:01:05.0 into 4x mode
Sep 22 21:21:24 amarillo kernel: [4294724.264000] apm: BIOS version 1.2 Flags
0x03 (Driver version 1.16ac)
Sep 22 21:21:24 amarillo kernel: [4294724.264000] apm: overridden by ACPI.
Sep 22 21:21:25 amarillo kernel: [4294725.170000] cs: IO port probe 0x100-0x4ff:
excluding 0x220-0x227 0x300-0x307 0x310-0x317 0x4d0-0x4d7
Sep 22 21:21:25 amarillo kernel: [4294725.172000] cs: IO port probe 0xc00-0xcf7:
excluding 0xc00-0xc07 0xc10-0xc17 0xc50-0xc57 0xc68-0xc6f 0xcd0-0xcd7
Sep 22 21:21:25 amarillo kernel: [4294725.173000] cs: IO port probe 0xa00-0xaff:
clean.
Sep 22 21:21:26 amarillo kernel: [4294725.654000] Bluetooth: Core ver 2.7
Sep 22 21:21:26 amarillo kernel: [4294725.654000] NET: Registered protocol family 31
Sep 22 21:21:26 amarillo kernel: [4294725.654000] Bluetooth: HCI device and
connection manager initialized
Sep 22 21:21:26 amarillo kernel: [4294725.654000] Bluetooth: HCI socket layer
initialized
Sep 22 21:21:26 amarillo kernel: [4294725.671000] Bluetooth: L2CAP ver 2.7
Sep 22 21:21:26 amarillo kernel: [4294725.671000] Bluetooth: L2CAP socket layer
initialized
Sep 22 21:21:26 amarillo kernel: [4294725.741000] Bluetooth: RFCOMM ver 1.5
Sep 22 21:21:26 amarillo kernel: [4294725.741000] Bluetooth: RFCOMM socket layer
initialized
Sep 22 21:21:26 amarillo kernel: [4294725.741000] Bluetooth: RFCOMM TTY layer
initialized
Sep 22 21:21:28 amarillo kernel: [4294728.204000] hdc: drive_cmd: status=0x51 {
DriveReady SeekComplete Error }
Sep 22 21:21:28 amarillo kernel: [4294728.204000] hdc: drive_cmd: error=0x04 {
AbortedCommand }
Sep 22 21:21:28 amarillo kernel: [4294728.204000] ide: failed opcode was: 0xe3
Sep 22 21:21:33 amarillo kernel: [4294732.420000] NET: Registered protocol family 10
Sep 22 21:21:33 amarillo kernel: [4294732.420000] Disabled Privacy Extensions on
device c031eb40(lo)
Sep 22 21:21:33 amarillo kernel: [4294732.421000] IPv6 over IPv4 tunneling driver
Sep 22 21:21:43 amarillo kernel: [4294743.329000] eth0: no IPv6 routers present
Sep 22 21:22:32 amarillo kernel: [4294792.174000] ndiswrapper
(usb_submit_nt_urb:612): usb_reset_pipe() = -71
Sep 22 21:22:32 amarillo kernel: [4294792.237000] usb 3-3: reset high speed USB
device using ehci_hcd and address 3
Sep 22 21:22:33 amarillo kernel: [4294792.413000] ndiswrapper
(usb_submit_nt_urb:612): usb_reset_pipe() = -71
Sep 22 21:22:33 amarillo kernel: [4294792.819000] ndiswrapper
(usb_reset_port:633): usb_reset_device() = -19
Sep 22 21:22:33 amarillo kernel: [4294792.819000] usb 3-3: USB disconnect, address 3
Sep 22 21:22:33 amarillo kernel: [4294792.826000] ndiswrapper: device wlan0 removed
Sep 22 21:22:35 amarillo kernel: [4294794.447000] hub 3-0:1.0: connect-debounce
failed, port 3 disabled
Sep 22 21:22:36 amarillo kernel: [4294795.485000] hub 3-0:1.0: over-current
change on port 2
Sep 22 21:22:36 amarillo kernel: [4294795.815000] usb 1-3: new full speed USB
device using ohci_hcd and address 3
Sep 22 21:22:36 amarillo kernel: [4294795.892000] usb 1-3: device descriptor
read/64, error -110
Sep 22 21:22:36 amarillo kernel: [4294796.129000] usb 1-3: not running at top
speed; connect to a high speed hub
Sep 22 21:22:40 amarillo kernel: [4294799.951000] wlan0: ndiswrapper ethernet
device 00:11:95:8d:36:a7 using driver netrtusb, configuration file 2001:3C00.0.conf
Sep 22 21:22:40 amarillo kernel: [4294800.060000] wlan0: encryption modes
supported: WEP, WPA with TKIP, WPA with AES/CCMP
Sep 22 21:23:08 amarillo kernel: [4294827.849000] eth0: link down
Sep 22 21:23:13 amarillo kernel: [4294833.388000] wlan0: no IPv6 routers present
Sep 22 21:23:18 amarillo kernel: [4294838.271000] eth0: no IPv6 routers present
Sep 22 21:25:04 amarillo kernel: [4294943.679000] ndiswrapper
(usb_submit_nt_urb:612): usb_reset_pipe() = -110
Sep 22 21:25:05 amarillo kernel: [4294944.419000] usb 1

As you said, I suspect this is a problem with USB and hotplug but I hope this is
some help.

-- 
Configure bugmail: http://bugzilla.ubuntu.com/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the QA contact for the bug, or are watching the QA contact.