From will at whizzy.org Sat Apr 1 00:06:14 2006 From: will at whizzy.org (WillCooke) Date: Sat, 01 Apr 2006 00:06:14 -0000 Subject: [Bug 5820] Ubuntu Dapper does not recognise Realtek 8201CL Ethernet Controller at Install References: <20051215184929.24631.84035.malonedeb@gangotri.ubuntu.com> Message-ID: <20060401000614.5415.17253.launchpad@canonical@gangotri.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Assignee: Ben Collins Status: Unconfirmed Description: Package name may be incorrect, it's was my best guess. I downloaded today's (15 Dec 05) installer daily CD image and booted on an ASUS K8U-X motherboard, but it tells me no network cards were found. There is a RealTek 8201CL on board, which is likely to make an appearance on more and more MB's because it's cheap! This isn't totally unexpected, as I went to the Realtek website: http://www.realtek.com.tw/downloads/phyDesc.aspx So, it is most likely that chipset (ULi M1689) drivers will need to be loaded as well before this NIC will work, unless a custom driver can be made? Before booting off this CD I had upgraded from Breezy (which also doesnt support this NIC) because the newer kernel has support for it and I wanted to find out if it would work in Dapper, and it does! Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Assignee: Ben Collins Status: Unconfirmed Description: Package name may be incorrect, it's was my best guess. I downloaded today's (15 Dec 05) installer daily CD image and booted on an ASUS K8U-X motherboard, but it tells me no network cards were found. There is a RealTek 8201CL on board, which is likely to make an appearance on more and more MB's because it's cheap! This isn't totally unexpected, as I went to the Realtek website: http://www.realtek.com.tw/downloads/phyDesc.aspx So, it is most likely that chipset (ULi M1689) drivers will need to be loaded as well before this NIC will work, unless a custom driver can be made? Before booting off this CD I had upgraded from Breezy (which also doesnt support this NIC) because the newer kernel has support for it and I wanted to find out if it would work in Dapper, and it does! -- Ubuntu Dapper does not recognise Realtek 8201CL Ethernet Controller at Install https://launchpad.net/malone/bugs/5820 From mdz at ubuntu.com Sat Apr 1 00:06:13 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Sat, 01 Apr 2006 00:06:13 -0000 Subject: [Bug 5820] Re: Ubuntu Dapper does not recognise Realtek 8201CL Ethernet Controller at Install References: <20051215184929.24631.84035.malonedeb@gangotri.ubuntu.com> Message-ID: <20060401000614.5415.61994.launchpad@gangotri.ubuntu.com> ** Changed in: debian-installer (Ubuntu) Sourcepackagename: debian-installer => linux-source-2.6.15 Assignee: (unassigned) => Ben Collins -- Ubuntu Dapper does not recognise Realtek 8201CL Ethernet Controller at Install https://launchpad.net/malone/bugs/5820 From vincent.trouilliez at modulonet.fr Sat Apr 1 00:21:56 2006 From: vincent.trouilliez at modulonet.fr (Trouilliez vincent) Date: Sat, 01 Apr 2006 00:21:56 -0000 Subject: [Bug 27233] CPU temperature always reported as 22 References: <20060113145332.21012.37435.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060401002156.23733.99956.launchpad@canonical@gandwana.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: Medium Assignee: Ben Collins Status: Unconfirmed Description: To read the temperature of the CPU, I read this file: /proc/acpi/thermal_zone/THRM/temperature. That worked perfectly with Hoary. However with Breezy, things deteriorated... the file would contain "22", regardless of the actual CPU temp. It would always read 22, go figure. Now with Dapper, it's even worse... it doesn't report "22", it reports ... nothing at all ! Yep, the file is empty, aaaaabsolutely..... empty. :-/ I have an old "nForce" motherboard with an Athlon CPU. I have to use the "athcool" package (universe), in order to significantly lower the temp of the CPU when it's idling (most of the time ie), and checking this "temperature" file is the only way I had to actually monitor the CPU temp to make sure that "athcool" does it job and that the CPU isn't overheating. So I kinda need this thing to work ! I will do anything you want to troubleshoot it, just ask, and I will do it... Do you want me to attach the output of "dmidecode" for more info, would that help ? Some other command ?? Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: Medium Assignee: Ben Collins Status: Unconfirmed Description: To read the temperature of the CPU, I read this file: /proc/acpi/thermal_zone/THRM/temperature. That worked perfectly with Hoary. However with Breezy, things deteriorated... the file would contain "22", regardless of the actual CPU temp. It would always read 22, go figure. Now with Dapper, it's even worse... it doesn't report "22", it reports ... nothing at all ! Yep, the file is empty, aaaaabsolutely..... empty. :-/ I have an old "nForce" motherboard with an Athlon CPU. I have to use the "athcool" package (universe), in order to significantly lower the temp of the CPU when it's idling (most of the time ie), and checking this "temperature" file is the only way I had to actually monitor the CPU temp to make sure that "athcool" does it job and that the CPU isn't overheating. So I kinda need this thing to work ! I will do anything you want to troubleshoot it, just ask, and I will do it... Do you want me to attach the output of "dmidecode" for more info, would that help ? Some other command ?? -- CPU temperature always reported as 22 https://launchpad.net/malone/bugs/27233 From vincent.trouilliez at modulonet.fr Sat Apr 1 00:23:20 2006 From: vincent.trouilliez at modulonet.fr (Trouilliez vincent) Date: Sat, 01 Apr 2006 00:23:20 -0000 Subject: [Bug 27454] Hibernation problem with SCSI controller References: <20060113145435.21012.82266.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060401002320.23733.52538.launchpad@canonical@gandwana.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Minor Priority: Medium Assignee: Ben Collins Status: Unconfirmed Description: With Breezy and Dapper, Hibernation works fine on my Desktop machine...except when I put my SCSI controller card in the machine. When the SCSI card is present in the machine, I can hibernate fine, but when I restart the machine, it reads the data/"pages" from the swap, but as soo as this is done, instead of starting to restore the desktop, the screen goes all black, the "Caps Lock" light on the keyboard, flashes, and the machine hangs and is completely unresponsive. I must press the reset button, and then it goes through a "normal" boot sequence. I checked in /var/log/messages, but I can't see any relevant kernel message in there. I think the machine locks so early in the "boot"/resume process, that there is no logging yet activated. The SCSI card is an old Adaptec 29xx which uses the "aic7xxx" module, the motherboard is has an 'nForce' chipset. Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Minor Priority: Medium Assignee: Ben Collins Status: Unconfirmed Description: With Breezy and Dapper, Hibernation works fine on my Desktop machine...except when I put my SCSI controller card in the machine. When the SCSI card is present in the machine, I can hibernate fine, but when I restart the machine, it reads the data/"pages" from the swap, but as soo as this is done, instead of starting to restore the desktop, the screen goes all black, the "Caps Lock" light on the keyboard, flashes, and the machine hangs and is completely unresponsive. I must press the reset button, and then it goes through a "normal" boot sequence. I checked in /var/log/messages, but I can't see any relevant kernel message in there. I think the machine locks so early in the "boot"/resume process, that there is no logging yet activated. The SCSI card is an old Adaptec 29xx which uses the "aic7xxx" module, the motherboard is has an 'nForce' chipset. -- Hibernation problem with SCSI controller https://launchpad.net/malone/bugs/27454 From rob.markovic at gmail.com Sat Apr 1 00:26:46 2006 From: rob.markovic at gmail.com (Robi) Date: Sat, 01 Apr 2006 00:26:46 -0000 Subject: [Bug 27422] USB Wi-Fi AirVast not detected References: <20060113145426.21012.92636.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060401002646.5415.3057.launchpad@canonical@gangotri.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: Medium Assignee: Ben Collins Status: Needs Info Description: On a Shuttle SFF PC, SN85G4, built in Wi-Fi card, recognized in lsusb as: Bus 001 Device 003: ID 124a:4023 AirVast not detected by prism2_usb (if that's the right driver), or prism54. aka Blitzz BWU713, IOGEAR GWU513,Shuttle PN15 (Airvast WM168g) no wireless device created (wlan0) Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: Medium Assignee: Ben Collins Status: Needs Info Description: On a Shuttle SFF PC, SN85G4, built in Wi-Fi card, recognized in lsusb as: Bus 001 Device 003: ID 124a:4023 AirVast not detected by prism2_usb (if that's the right driver), or prism54. aka Blitzz BWU713, IOGEAR GWU513,Shuttle PN15 (Airvast WM168g) no wireless device created (wlan0) -- USB Wi-Fi AirVast not detected https://launchpad.net/malone/bugs/27422 From werchowyna at epf.pl Sat Apr 1 00:27:19 2006 From: werchowyna at epf.pl (shiechka) Date: Sat, 01 Apr 2006 00:27:19 -0000 Subject: [Bug 27416] built-in 4in1 card reader doesn't work References: <20060113145424.21012.36434.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060401002719.5441.55428.launchpad@canonical@gangotri.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: Medium Assignee: Ben Collins Status: Unconfirmed Description: Breezy. After I insert an SD 1GB card into my built-in 4in1 reader (SD/MS/MMC/MSPRO) it is not available as a storage device, although the system recognizes the device presence: maciek at sorbus:~$ dmesg | tail [4294985.428000] sdb: Write Protect is off [4294985.428000] sdb: Mode Sense: 00 00 00 00 [4294985.428000] sdb: assuming drive cache: write through [4294985.435000] sdb : READ CAPACITY failed. [4294985.435000] sdb : status=0, message=00, host=7, driver=00 [4294985.435000] sdb : sense not available. [4294985.436000] sdb: Write Protect is off [4294985.436000] sdb: Mode Sense: 00 00 00 00 [4294985.436000] sdb: assuming drive cache: write through [4294985.436000] /dev/scsi/host2/bus0/target0/lun0: unable to read partition table My hardware is Fujitsu Siemens Amilo 1437G laptop. Specs: http://www.fujitsu-siemens.nl/Resources/19/321597266.pdf Same happens in Hoary. Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: Medium Assignee: Ben Collins Status: Unconfirmed Description: Breezy. After I insert an SD 1GB card into my built-in 4in1 reader (SD/MS/MMC/MSPRO) it is not available as a storage device, although the system recognizes the device presence: maciek at sorbus:~$ dmesg | tail [4294985.428000] sdb: Write Protect is off [4294985.428000] sdb: Mode Sense: 00 00 00 00 [4294985.428000] sdb: assuming drive cache: write through [4294985.435000] sdb : READ CAPACITY failed. [4294985.435000] sdb : status=0, message=00, host=7, driver=00 [4294985.435000] sdb : sense not available. [4294985.436000] sdb: Write Protect is off [4294985.436000] sdb: Mode Sense: 00 00 00 00 [4294985.436000] sdb: assuming drive cache: write through [4294985.436000] /dev/scsi/host2/bus0/target0/lun0: unable to read partition table My hardware is Fujitsu Siemens Amilo 1437G laptop. Specs: http://www.fujitsu-siemens.nl/Resources/19/321597266.pdf Same happens in Hoary. -- built-in 4in1 card reader doesn't work https://launchpad.net/malone/bugs/27416 From mdz at ubuntu.com Sat Apr 1 00:23:20 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Sat, 01 Apr 2006 00:23:20 -0000 Subject: [Bug 27454] Re: Hibernation problem with SCSI controller References: <20060113145435.21012.82266.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060401002320.23733.50872.malone@gandwana.ubuntu.com> Send lspci and lspci -n output so we can see exactly which SCSI controller you have ** Changed in: acpi (Ubuntu) Sourcepackagename: acpi => linux-source-2.6.15 Binarypackagename: acpi => None Severity: Normal => Minor Assignee: (unassigned) => Ben Collins -- Hibernation problem with SCSI controller https://launchpad.net/malone/bugs/27454 From mdz at ubuntu.com Sat Apr 1 00:21:56 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Sat, 01 Apr 2006 00:21:56 -0000 Subject: [Bug 27233] Re: CPU temperature always reported as 22 References: <20060113145332.21012.37435.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060401002156.23733.52425.malone@gandwana.ubuntu.com> It's normal for the files to appear to be 0 bytes; /proc is special. Please test with current Dapper and report whether this bug still exists for you ** Summary changed: - CPU temperature not reported anymore + CPU temperature always reported as 22 ** Changed in: acpi (Ubuntu) Sourcepackagename: acpi => linux-source-2.6.15 Binarypackagename: acpi => None Assignee: (unassigned) => Ben Collins -- CPU temperature always reported as 22 https://launchpad.net/malone/bugs/27233 From mikael.olenfalk at gmail.com Sat Apr 1 00:30:20 2006 From: mikael.olenfalk at gmail.com (Mikael Olenfalk) Date: Sat, 01 Apr 2006 00:30:20 -0000 Subject: [Bug 27384] The sound module is not loaded on boot References: <20060113145415.21012.80741.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060401003020.5441.76295.launchpad@canonical@gangotri.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: Medium Assignee: Ben Collins Status: Unconfirmed Description: I need to manually modprobe snd-intel8x0 to get my sound working. This is my sound card: 0000:00:04.0 Multimedia audio controller: nVidia Corporation CK804 AC'97 Audio Controller (rev a2) Subsystem: ASUSTeK Computer Inc. K8N4-E Mainboard Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- TAbort- SERR- Message-ID: <20060401002719.5441.8347.launchpad@gangotri.ubuntu.com> ** Changed in: libusb libusb-dev (Ubuntu) Sourcepackagename: libusb => linux-source-2.6.15 Binarypackagename: libusb-dev => None Assignee: (unassigned) => Ben Collins -- built-in 4in1 card reader doesn't work https://launchpad.net/malone/bugs/27416 From mdz at ubuntu.com Sat Apr 1 00:29:57 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Sat, 01 Apr 2006 00:29:57 -0000 Subject: [Bug 27413] Re: it8212 ide controller support not available in Breezy References: <20060113145424.21012.29488.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060401002957.5415.9429.launchpad@gangotri.ubuntu.com> ** Changed in: linux-meta linux-image-k7 (Ubuntu) Sourcepackagename: linux-meta => linux-source-2.6.15 Binarypackagename: linux-image-k7 => None Severity: Normal => Wishlist Assignee: (unassigned) => Ben Collins -- it8212 ide controller support not available in Breezy https://launchpad.net/malone/bugs/27413 From mdz at ubuntu.com Sat Apr 1 00:26:45 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Sat, 01 Apr 2006 00:26:45 -0000 Subject: [Bug 27422] Re: USB Wi-Fi AirVast not detected References: <20060113145426.21012.92636.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060401002645.5415.51405.malone@gangotri.ubuntu.com> Is this still the case in current Dapper? ** Changed in: linux-wlan-ng (Ubuntu) Sourcepackagename: linux-wlan-ng => linux-source-2.6.15 Binarypackagename: linux-wlan-ng => None Assignee: (unassigned) => Ben Collins Status: Unconfirmed => Needs Info -- USB Wi-Fi AirVast not detected https://launchpad.net/malone/bugs/27422 From mdz at ubuntu.com Sat Apr 1 00:30:20 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Sat, 01 Apr 2006 00:30:20 -0000 Subject: [Bug 27384] Re: The sound module is not loaded on boot References: <20060113145415.21012.80741.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060401003020.5441.54146.launchpad@gangotri.ubuntu.com> ** Changed in: alsa-driver alsa-base (Ubuntu) Sourcepackagename: alsa-driver => linux-source-2.6.15 Binarypackagename: alsa-base => None Assignee: (unassigned) => Ben Collins -- The sound module is not loaded on boot https://launchpad.net/malone/bugs/27384 From mdz at ubuntu.com Sat Apr 1 00:30:41 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Sat, 01 Apr 2006 00:30:41 -0000 Subject: [Bug 27382] Re: xircom_tulip_cb not included References: <20060113145414.21012.31752.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060401003041.23707.38723.launchpad@gandwana.ubuntu.com> ** Changed in: linux-meta linux-image-k7 (Ubuntu) Sourcepackagename: linux-meta => linux-source-2.6.15 Binarypackagename: linux-image-k7 => None Assignee: (unassigned) => Ben Collins -- xircom_tulip_cb not included https://launchpad.net/malone/bugs/27382 From frederik.van.slycken at gmail.com Sat Apr 1 00:50:23 2006 From: frederik.van.slycken at gmail.com (Black Horizon) Date: Sat, 01 Apr 2006 00:50:23 -0000 Subject: [Bug 6029] screen flickers with vga16fb References: <20051221214735.24631.23284.malonedeb@gangotri.ubuntu.com> Message-ID: <20060401005023.5415.38981.launchpad@canonical@gangotri.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Assignee: Ben Collins Status: Needs Info Description: When I install ubuntu on my laptop, my screen flickers all the time. as soon as it is in a more graphical part, it runs as normal, but during all those blue-background text-and-some-colors install parts (with the running percentages and such), my screen flickers quite fast. The laptop is an ASUS A4B00K 64 bit (installing the 64 bit-ubuntu), but a mate had the same problem with another ASUS laptop, installing the 32-bit ubuntu.. (both breezy badger) the screen also flickers when I boot, during the "loading modules", "initializing /dev" and stuff, that entire list (in brown, under a brown ubuntu-logo), and when shutting down, the checklist of the shutting down... P.S. I do not know if this is the right Source Package Name, please forgive me if I was wrong (probably) Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Assignee: Ben Collins Status: Needs Info Description: When I install ubuntu on my laptop, my screen flickers all the time. as soon as it is in a more graphical part, it runs as normal, but during all those blue-background text-and-some-colors install parts (with the running percentages and such), my screen flickers quite fast. The laptop is an ASUS A4B00K 64 bit (installing the 64 bit-ubuntu), but a mate had the same problem with another ASUS laptop, installing the 32-bit ubuntu.. (both breezy badger) the screen also flickers when I boot, during the "loading modules", "initializing /dev" and stuff, that entire list (in brown, under a brown ubuntu-logo), and when shutting down, the checklist of the shutting down... P.S. I do not know if this is the right Source Package Name, please forgive me if I was wrong (probably) -- screen flickers with vga16fb https://launchpad.net/malone/bugs/6029 From mdz at ubuntu.com Sat Apr 1 00:50:22 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Sat, 01 Apr 2006 00:50:22 -0000 Subject: [Bug 6029] Re: screen flickers with vga16fb References: <20051221214735.24631.23284.malonedeb@gangotri.ubuntu.com> Message-ID: <20060401005022.5415.45614.malone@gangotri.ubuntu.com> Is this still true in current Dapper? ** Summary changed: - screen flickers while installing on laptop + screen flickers with vga16fb ** Changed in: debian-installer (Ubuntu) Sourcepackagename: debian-installer => linux-source-2.6.15 Assignee: (unassigned) => Ben Collins Status: Unconfirmed => Needs Info -- screen flickers with vga16fb https://launchpad.net/malone/bugs/6029 From mdz at ubuntu.com Sat Apr 1 00:55:16 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Sat, 01 Apr 2006 00:55:16 -0000 Subject: [Bug 27551] Re: cpu frequency is wrong References: <20060113151808.29386.65945.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060401005516.23733.27632.launchpad@gandwana.ubuntu.com> ** Changed in: linux-meta linux-image-k7 (Ubuntu) Sourcepackagename: linux-meta => linux-source-2.6.15 Binarypackagename: linux-image-k7 => None Assignee: (unassigned) => Ben Collins -- cpu frequency is wrong https://launchpad.net/malone/bugs/27551 From HyDr0g3n at hotmail.com Sat Apr 1 01:42:00 2006 From: HyDr0g3n at hotmail.com (Christophe Dumez) Date: Sat, 01 Apr 2006 01:42:00 -0000 Subject: [Bug 27888] [DAPPER] ndiswrapper not working with kernel 2.6.15 (AMD64) References: <20060113151945.29386.46469.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060401014200.23707.65879.launchpad@canonical@gandwana.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: Medium Assignee: Ben Collins Status: Unconfirmed Description: I'm using latest Dapper AMD64. I tried to install my INPROCOM IPN 2220 wireless card which used to work under Breezy. I get an error in dmesg concerning an error in kernel 2.6.15.. Dmesg : [ 36.915463] ndiswrapper version 1.5 loaded (preempt=yes,smp=yes) [ 37.060378] ndiswrapper (load_pe_images:582): fixing KI_USER_SHARED_DATA address in the driver [ 37.061194] ndiswrapper: driver neti2220x64 () loaded [ 37.061376] ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 21 (level, low) -> IRQ 209 [ 37.094600] ----------- [cut here ] --------- [please bite here ] --------- [ 37.094604] Kernel BUG at include/linux/gfp.h:80 [ 37.094607] invalid operand: 0000 [1] PREEMPT SMP [ 37.094610] CPU 0 [ 37.094612] Modules linked in: ndiswrapper nls_iso8859_1 nls_cp437 vfat fat dm_mod sr_mod sbp2 scsi_mod lp usblp snd_seq_dummy snd_seq_oss snd_seq_midi snd_seq_midi_event usbhid snd_seq i2c_viapro i2c_core snd_via82xx gameport snd_via82xx_modem snd_ac97_codec snd_ac97_bus pcmcia snd_pcm_oss snd_mixer_oss snd_pcm snd_mpu401_uart psmouse rtc parport_pc parport pcspkr snd_rawmidi snd_seq_device serio_raw snd_timer ehci_hcd via_ircc uhci_hcd r8169 nsc_ircc ohci1394 ieee1394 snd snd_page_alloc usbcore soundcore irda nvidia crc_ccitt yenta_socket shpchp pci_hotplug rsrc_nonstatic pcmcia_core evdev md_mod ext3 jbd ide_generic ide_cd cdrom ide_disk via82cxxx generic thermal processor fan capability commoncap vga16fb cfbcopyarea vgastate cfbimgblt cfbfillrect fbcon tileblit font bitblit softcursor [ 37.094649] Pid: 3414, comm: loadndisdriver Tainted: P 2.6.15-10-amd64-k8 #1 [ 37.094652] RIP: 0010:[] {dma_alloc_pages+79} [ 37.094661] RSP: 0018:ffff81001a5f58f0 EFLAGS: 00010202 [ 37.094664] RAX: 0000000000000005 RBX: 00000000000004d5 RCX: ffff81000000bc00 [ 37.094668] RDX: 0000000000000006 RSI: 0000000000000006 RDI: ffff81001f9eb870 [ 37.094671] RBP: 0000000000024e10 R08: 00000000000004d5 R09: ffffffff8883a020 [ 37.094675] R10: 0000000000000000 R11: ffffffff8880d3f0 R12: 0000000000000000 [ 37.094678] R13: 0000000000000049 R14: ffffc2000032c338 R15: 00000000ffffffff [ 37.094683] FS: 00002aaaaadf96d0(0000) GS:ffffffff80426800(0000) knlGS:0000000000000000 [ 37.094686] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 37.094689] CR2: 00002aaaaac525e0 CR3: 000000001a526000 CR4: 00000000000006e0 [ 37.094694] Process loadndisdriver (pid: 3414, threadinfo ffff81001a5f4000, task ffff81001d7242c0) [ 37.094696] Stack: ffff81001f924c80 ffffffff80123e93 ffff81001a5f5958 0000000000024e10 [ 37.094704] ffff81001f9eb870 0000000000000000 0000000000024e10 0000000000000000 [ 37.094708] ffffc2000032c328 ffffc2000032c338 [ 37.094712] Call Trace:{dma_alloc_coherent+131} {:ndiswrapper:NdisMAllocateSharedMemory+72} [ 37.094754] {:ndiswrapper:ExAllocatePoolWithTag+60} [ 37.094775] {lock_timer_base+41} {:ndiswrapper:lin_to_win6+30} [ 37.094817] {:ndiswrapper:miniport_init+302} {:ndiswrapper:ndiswrapper_start_device+23} [ 37.094864] {pci_bus_read_config_byte+116} {pci_conf1_read+223} [ 37.094880] {mp_register_gsi+67} {acpi_register_gsi+90} [ 37.094892] {kzalloc+43} {__request_region+153} [ 37.094905] {pci_request_region+211} {:ndiswrapper:ndiswrapper_add_pci_device+495} [ 37.094929] {pci_device_probe+243} {driver_probe_device+77} [ 37.094945] {__driver_attach+0} {__driver_attach+64} [ 37.094952] {__driver_attach+0} {bus_for_each_dev+73} [ 37.094962] {bus_add_driver+128} {__pci_register_driver+178} [ 37.094977] {:ndiswrapper:register_devices+1049} [ 37.094994] {:ndiswrapper:wrapper_ioctl+108} {do_ioctl+105} [ 37.095024] {vfs_ioctl+683} {mntput_no_expire+28} [ 37.095034] {sys_ioctl+108} {system_call+126} [ 37.095047] [ 37.095055] [ 37.095056] Code: 0f 0b 68 f1 88 32 80 c2 50 00 66 66 66 90 66 66 90 48 63 d0 [ 37.095065] RIP {dma_alloc_pages+79} RSP [ 37.095071] <3>ndiswrapper (wrapper_init:1830): loadndiswrapper failed (11); check system log for messages from 'loadndisdriver' [ 37.095659] Unable to handle kernel NULL pointer dereference at 0000000000000000 RIP: [ 37.095663] {_spin_lock+21} [ 37.095671] PGD 1a492067 PUD 1a493067 PMD 0 [ 37.095675] Oops: 0002 [2] PREEMPT SMP [ 37.095677] CPU 0 [ 37.095679] Modules linked in: ndiswrapper nls_iso8859_1 nls_cp437 vfat fat dm_mod sr_mod sbp2 scsi_mod lp usblp snd_seq_dummy snd_seq_oss snd_seq_midi snd_seq_midi_event usbhid snd_seq i2c_viapro i2c_core snd_via82xx gameport snd_via82xx_modem snd_ac97_codec snd_ac97_bus pcmcia snd_pcm_oss snd_mixer_oss snd_pcm snd_mpu401_uart psmouse rtc parport_pc parport pcspkr snd_rawmidi snd_seq_device serio_raw snd_timer ehci_hcd via_ircc uhci_hcd r8169 nsc_ircc ohci1394 ieee1394 snd snd_page_alloc usbcore soundcore irda nvidia crc_ccitt yenta_socket shpchp pci_hotplug rsrc_nonstatic pcmcia_core evdev md_mod ext3 jbd ide_generic ide_cd cdrom ide_disk via82cxxx generic thermal processor fan capability commoncap vga16fb cfbcopyarea vgastate cfbimgblt cfbfillrect fbcon tileblit font bitblit softcursor [ 37.095717] Pid: 3408, comm: modprobe Tainted: P 2.6.15-10-amd64-k8 #1 [ 37.095720] RIP: 0010:[] {_spin_lock+21} [ 37.095726] RSP: 0018:ffff81001a4b7e58 EFLAGS: 00010246 [ 37.095728] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000034 [ 37.095731] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 [ 37.095734] RBP: ffffffff88839a50 R08: 0000000000000003 R09: 0000000000000001 [ 37.095738] R10: 0000000000000000 R11: ffffffff80272030 R12: 0000000000000000 [ 37.095742] R13: ffffffff888394c0 R14: ffffffff803780a0 R15: 00002aaaaaac4000 [ 37.095746] FS: 00002aaaaadf96d0(0000) GS:ffffffff80426800(0000) knlGS:0000000000000000 [ 37.095749] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 37.095752] CR2: 0000000000000000 CR3: 000000001a48d000 CR4: 00000000000006e0 [ 37.095756] Process modprobe (pid: 3408, threadinfo ffff81001a4b6000, task ffff81001c1536e0) [ 37.095759] Stack: ffffffff88839af8 ffffffff8030ee4c 0000000000000000 ffffffff88839a60 [ 37.095765] ffffffff80385220 ffffffff802712d2 ffffffff88839a60 000000000004f120 [ 37.095771] ffffffff88839b68 ffffffff80271cdd [ 37.095775] Call Trace:{klist_remove+28} {bus_remove_driver+114} [ 37.095785] {driver_unregister+13} {pci_unregister_driver+23} [ 37.095795] {:ndiswrapper:loader_exit+154} {:ndiswrapper:module_cleanup+6} [ 37.095835] {:ndiswrapper:wrapper_init+412} {stop_machine_run+69} [ 37.095857] {sys_init_module+257} {system_call+126} [ 37.095870] [ 37.095879] [ 37.095880] Code: 87 03 85 c0 7f 49 65 48 8b 04 25 10 00 00 00 ff 88 44 e0 ff [ 37.095889] RIP {_spin_lock+21} RSP [ 37.095895] CR2: 0000000000000000 [ 37.095896] <6>note: modprobe[3408] exited with preempt_count 1 Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: Medium Assignee: Ben Collins Status: Unconfirmed Description: I'm using latest Dapper AMD64. I tried to install my INPROCOM IPN 2220 wireless card which used to work under Breezy. I get an error in dmesg concerning an error in kernel 2.6.15.. Dmesg : [ 36.915463] ndiswrapper version 1.5 loaded (preempt=yes,smp=yes) [ 37.060378] ndiswrapper (load_pe_images:582): fixing KI_USER_SHARED_DATA address in the driver [ 37.061194] ndiswrapper: driver neti2220x64 () loaded [ 37.061376] ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 21 (level, low) -> IRQ 209 [ 37.094600] ----------- [cut here ] --------- [please bite here ] --------- [ 37.094604] Kernel BUG at include/linux/gfp.h:80 [ 37.094607] invalid operand: 0000 [1] PREEMPT SMP [ 37.094610] CPU 0 [ 37.094612] Modules linked in: ndiswrapper nls_iso8859_1 nls_cp437 vfat fat dm_mod sr_mod sbp2 scsi_mod lp usblp snd_seq_dummy snd_seq_oss snd_seq_midi snd_seq_midi_event usbhid snd_seq i2c_viapro i2c_core snd_via82xx gameport snd_via82xx_modem snd_ac97_codec snd_ac97_bus pcmcia snd_pcm_oss snd_mixer_oss snd_pcm snd_mpu401_uart psmouse rtc parport_pc parport pcspkr snd_rawmidi snd_seq_device serio_raw snd_timer ehci_hcd via_ircc uhci_hcd r8169 nsc_ircc ohci1394 ieee1394 snd snd_page_alloc usbcore soundcore irda nvidia crc_ccitt yenta_socket shpchp pci_hotplug rsrc_nonstatic pcmcia_core evdev md_mod ext3 jbd ide_generic ide_cd cdrom ide_disk via82cxxx generic thermal processor fan capability commoncap vga16fb cfbcopyarea vgastate cfbimgblt cfbfillrect fbcon tileblit font bitblit softcursor [ 37.094649] Pid: 3414, comm: loadndisdriver Tainted: P 2.6.15-10-amd64-k8 #1 [ 37.094652] RIP: 0010:[] {dma_alloc_pages+79} [ 37.094661] RSP: 0018:ffff81001a5f58f0 EFLAGS: 00010202 [ 37.094664] RAX: 0000000000000005 RBX: 00000000000004d5 RCX: ffff81000000bc00 [ 37.094668] RDX: 0000000000000006 RSI: 0000000000000006 RDI: ffff81001f9eb870 [ 37.094671] RBP: 0000000000024e10 R08: 00000000000004d5 R09: ffffffff8883a020 [ 37.094675] R10: 0000000000000000 R11: ffffffff8880d3f0 R12: 0000000000000000 [ 37.094678] R13: 0000000000000049 R14: ffffc2000032c338 R15: 00000000ffffffff [ 37.094683] FS: 00002aaaaadf96d0(0000) GS:ffffffff80426800(0000) knlGS:0000000000000000 [ 37.094686] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 37.094689] CR2: 00002aaaaac525e0 CR3: 000000001a526000 CR4: 00000000000006e0 [ 37.094694] Process loadndisdriver (pid: 3414, threadinfo ffff81001a5f4000, task ffff81001d7242c0) [ 37.094696] Stack: ffff81001f924c80 ffffffff80123e93 ffff81001a5f5958 0000000000024e10 [ 37.094704] ffff81001f9eb870 0000000000000000 0000000000024e10 0000000000000000 [ 37.094708] ffffc2000032c328 ffffc2000032c338 [ 37.094712] Call Trace:{dma_alloc_coherent+131} {:ndiswrapper:NdisMAllocateSharedMemory+72} [ 37.094754] {:ndiswrapper:ExAllocatePoolWithTag+60} [ 37.094775] {lock_timer_base+41} {:ndiswrapper:lin_to_win6+30} [ 37.094817] {:ndiswrapper:miniport_init+302} {:ndiswrapper:ndiswrapper_start_device+23} [ 37.094864] {pci_bus_read_config_byte+116} {pci_conf1_read+223} [ 37.094880] {mp_register_gsi+67} {acpi_register_gsi+90} [ 37.094892] {kzalloc+43} {__request_region+153} [ 37.094905] {pci_request_region+211} {:ndiswrapper:ndiswrapper_add_pci_device+495} [ 37.094929] {pci_device_probe+243} {driver_probe_device+77} [ 37.094945] {__driver_attach+0} {__driver_attach+64} [ 37.094952] {__driver_attach+0} {bus_for_each_dev+73} [ 37.094962] {bus_add_driver+128} {__pci_register_driver+178} [ 37.094977] {:ndiswrapper:register_devices+1049} [ 37.094994] {:ndiswrapper:wrapper_ioctl+108} {do_ioctl+105} [ 37.095024] {vfs_ioctl+683} {mntput_no_expire+28} [ 37.095034] {sys_ioctl+108} {system_call+126} [ 37.095047] [ 37.095055] [ 37.095056] Code: 0f 0b 68 f1 88 32 80 c2 50 00 66 66 66 90 66 66 90 48 63 d0 [ 37.095065] RIP {dma_alloc_pages+79} RSP [ 37.095071] <3>ndiswrapper (wrapper_init:1830): loadndiswrapper failed (11); check system log for messages from 'loadndisdriver' [ 37.095659] Unable to handle kernel NULL pointer dereference at 0000000000000000 RIP: [ 37.095663] {_spin_lock+21} [ 37.095671] PGD 1a492067 PUD 1a493067 PMD 0 [ 37.095675] Oops: 0002 [2] PREEMPT SMP [ 37.095677] CPU 0 [ 37.095679] Modules linked in: ndiswrapper nls_iso8859_1 nls_cp437 vfat fat dm_mod sr_mod sbp2 scsi_mod lp usblp snd_seq_dummy snd_seq_oss snd_seq_midi snd_seq_midi_event usbhid snd_seq i2c_viapro i2c_core snd_via82xx gameport snd_via82xx_modem snd_ac97_codec snd_ac97_bus pcmcia snd_pcm_oss snd_mixer_oss snd_pcm snd_mpu401_uart psmouse rtc parport_pc parport pcspkr snd_rawmidi snd_seq_device serio_raw snd_timer ehci_hcd via_ircc uhci_hcd r8169 nsc_ircc ohci1394 ieee1394 snd snd_page_alloc usbcore soundcore irda nvidia crc_ccitt yenta_socket shpchp pci_hotplug rsrc_nonstatic pcmcia_core evdev md_mod ext3 jbd ide_generic ide_cd cdrom ide_disk via82cxxx generic thermal processor fan capability commoncap vga16fb cfbcopyarea vgastate cfbimgblt cfbfillrect fbcon tileblit font bitblit softcursor [ 37.095717] Pid: 3408, comm: modprobe Tainted: P 2.6.15-10-amd64-k8 #1 [ 37.095720] RIP: 0010:[] {_spin_lock+21} [ 37.095726] RSP: 0018:ffff81001a4b7e58 EFLAGS: 00010246 [ 37.095728] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000034 [ 37.095731] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 [ 37.095734] RBP: ffffffff88839a50 R08: 0000000000000003 R09: 0000000000000001 [ 37.095738] R10: 0000000000000000 R11: ffffffff80272030 R12: 0000000000000000 [ 37.095742] R13: ffffffff888394c0 R14: ffffffff803780a0 R15: 00002aaaaaac4000 [ 37.095746] FS: 00002aaaaadf96d0(0000) GS:ffffffff80426800(0000) knlGS:0000000000000000 [ 37.095749] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 37.095752] CR2: 0000000000000000 CR3: 000000001a48d000 CR4: 00000000000006e0 [ 37.095756] Process modprobe (pid: 3408, threadinfo ffff81001a4b6000, task ffff81001c1536e0) [ 37.095759] Stack: ffffffff88839af8 ffffffff8030ee4c 0000000000000000 ffffffff88839a60 [ 37.095765] ffffffff80385220 ffffffff802712d2 ffffffff88839a60 000000000004f120 [ 37.095771] ffffffff88839b68 ffffffff80271cdd [ 37.095775] Call Trace:{klist_remove+28} {bus_remove_driver+114} [ 37.095785] {driver_unregister+13} {pci_unregister_driver+23} [ 37.095795] {:ndiswrapper:loader_exit+154} {:ndiswrapper:module_cleanup+6} [ 37.095835] {:ndiswrapper:wrapper_init+412} {stop_machine_run+69} [ 37.095857] {sys_init_module+257} {system_call+126} [ 37.095870] [ 37.095879] [ 37.095880] Code: 87 03 85 c0 7f 49 65 48 8b 04 25 10 00 00 00 ff 88 44 e0 ff [ 37.095889] RIP {_spin_lock+21} RSP [ 37.095895] CR2: 0000000000000000 [ 37.095896] <6>note: modprobe[3408] exited with preempt_count 1 -- [DAPPER] ndiswrapper not working with kernel 2.6.15 (AMD64) https://launchpad.net/malone/bugs/27888 From raywood at magma.ca Sat Apr 1 01:47:12 2006 From: raywood at magma.ca (R. Wood) Date: Sat, 01 Apr 2006 01:47:12 -0000 Subject: [Bug 6354] Onboard ALC655 soundcard not supported References: <20060102002823.29335.6537.malonedeb@gangotri.ubuntu.com> Message-ID: <20060401014712.23707.43277.launchpad@canonical@gandwana.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Assignee: Ben Collins Status: Unconfirmed Description: This bug report was requested by 'crimsun' in freenode/#ubuntu. crimsun intends to follow-up this bug upstream. Mainboard Manufacturer: Biostar(?); AMD(?) Mainboard Model: CRU51-M7 Additional Soundcard info: Onboard AC'97 Sound Codec; Chip = ALC655: http://www.realtek.com.tw/products/products1-2.aspx?modelid=2003051 Purpose of Bug Report: to provide information to identify PCI ID's for my hardware; output for 'lspci -v' and 'lspci -nv' follows below. lspci -v output: ---- 8< ---- 0000:00:00.0 RAM memory: nVidia Corporation: Unknown device 02f1 (rev a2) Flags: bus master, 66MHz, fast devsel, latency 0 Capabilities: [44] #08 [01e0] Capabilities: [e0] #08 [a800] 0000:00:00.1 RAM memory: nVidia Corporation: Unknown device 02fa (rev a2) Flags: 66MHz, fast devsel 0000:00:00.2 RAM memory: nVidia Corporation: Unknown device 02fe (rev a2) Flags: 66MHz, fast devsel 0000:00:00.3 RAM memory: nVidia Corporation: Unknown device 02f8 (rev a2) Flags: 66MHz, fast devsel 0000:00:00.4 RAM memory: nVidia Corporation: Unknown device 02f9 (rev a2) Flags: bus master, 66MHz, fast devsel, latency 0 0000:00:00.5 RAM memory: nVidia Corporation: Unknown device 02ff (rev a2) Flags: bus master, 66MHz, fast devsel, latency 0 Capabilities: [44] #00 [00fe] Capabilities: [fc] #00 [0000] 0000:00:00.6 RAM memory: nVidia Corporation: Unknown device 027f (rev a2) Flags: 66MHz, fast devsel 0000:00:00.7 RAM memory: nVidia Corporation: Unknown device 027e (rev a2) Flags: 66MHz, fast devsel 0000:00:02.0 PCI bridge: nVidia Corporation: Unknown device 02fc (rev a1) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 0000a000-0000afff Memory behind bridge: fd700000-fd7fffff Prefetchable memory behind bridge: 00000000fde00000-00000000fde00000 Capabilities: [40] #0d [0000] Capabilities: [48] Power Management version 2 Capabilities: [50] Message Signalled Interrupts: 64bit+ Queue=0/1 Enable- Capabilities: [60] #08 [a800] Capabilities: [80] #10 [0141] 0000:00:03.0 PCI bridge: nVidia Corporation: Unknown device 02fd (rev a1) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 00009000-00009fff Memory behind bridge: fdd00000-fddfffff Prefetchable memory behind bridge: 00000000fdc00000-00000000fdc00000 Capabilities: [40] #0d [0000] Capabilities: [48] Power Management version 2 Capabilities: [50] Message Signalled Interrupts: 64bit+ Queue=0/1 Enable- Capabilities: [60] #08 [a800] Capabilities: [80] #10 [0141] 0000:00:04.0 PCI bridge: nVidia Corporation: Unknown device 02fb (rev a1) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 I/O behind bridge: 0000b000-0000bfff Memory behind bridge: fd900000-fd9fffff Prefetchable memory behind bridge: 00000000fd800000-00000000fd800000 Capabilities: [40] #0d [0000] Capabilities: [48] Power Management version 2 Capabilities: [50] Message Signalled Interrupts: 64bit+ Queue=0/1 Enable- Capabilities: [60] #08 [a800] Capabilities: [80] #10 [0141] 0000:00:05.0 VGA compatible controller: nVidia Corporation: Unknown device 0242 (rev a2) (prog-if 00 [VGA]) Subsystem: Biostar Microtech Int'l Corp: Unknown device 1401 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 16 Memory at fb000000 (32-bit, non-prefetchable) [size=16M] Memory at d0000000 (64-bit, prefetchable) [size=256M] Memory at fc000000 (64-bit, non-prefetchable) [size=16M] Capabilities: [48] Power Management version 2 Capabilities: [50] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable- 0000:00:09.0 RAM memory: nVidia Corporation: Unknown device 0270 (rev a2) Subsystem: nVidia Corporation: Unknown device cb84 Flags: bus master, 66MHz, fast devsel, latency 0 Capabilities: [44] #08 [01e9] Capabilities: [e0] #08 [a800] 0000:00:0a.0 ISA bridge: nVidia Corporation: Unknown device 0261 (rev a2) Subsystem: Biostar Microtech Int'l Corp: Unknown device 3402 Flags: bus master, 66MHz, fast devsel, latency 0 0000:00:0a.1 SMBus: nVidia Corporation: Unknown device 0264 (rev a2) Subsystem: Biostar Microtech Int'l Corp: Unknown device 3402 Flags: 66MHz, fast devsel, IRQ 10 I/O ports at 1c00 [size=64] I/O ports at 1c40 [size=64] Capabilities: [44] Power Management version 2 0000:00:0a.2 RAM memory: nVidia Corporation: Unknown device 0272 (rev a2) Subsystem: Biostar Microtech Int'l Corp: Unknown device 3402 Flags: 66MHz, fast devsel 0000:00:0b.0 USB Controller: nVidia Corporation: Unknown device 026d (rev a2) (prog-if 10 [OHCI]) Subsystem: Biostar Microtech Int'l Corp: Unknown device 3402 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 22 Memory at fe02f000 (32-bit, non-prefetchable) [size=4K] Capabilities: [44] Power Management version 2 0000:00:0b.1 USB Controller: nVidia Corporation: Unknown device 026e (rev a2) (prog-if 20 [EHCI]) Subsystem: Biostar Microtech Int'l Corp: Unknown device 3402 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 21 Memory at fe02e000 (32-bit, non-prefetchable) [size=256] Capabilities: [44] #0a [2098] Capabilities: [80] Power Management version 2 0000:00:0d.0 IDE interface: nVidia Corporation: Unknown device 0265 (rev a1) (prog-if 8a [Master SecP PriP]) Subsystem: Biostar Microtech Int'l Corp: Unknown device 3402 Flags: bus master, 66MHz, fast devsel, latency 0 I/O ports at f400 [size=16] Capabilities: [44] Power Management version 2 0000:00:0e.0 IDE interface: nVidia Corporation: Unknown device 0266 (rev a1) (prog-if 85 [Master SecO PriO]) Subsystem: Biostar Microtech Int'l Corp: Unknown device 5401 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 23 I/O ports at 09f0 [size=8] I/O ports at 0bf0 [size=4] I/O ports at 0970 [size=8] I/O ports at 0b70 [size=4] I/O ports at e000 [size=16] Memory at fe02d000 (32-bit, non-prefetchable) [size=4K] Capabilities: [44] Power Management version 2 Capabilities: [b0] Message Signalled Interrupts: 64bit+ Queue=0/2 Enable- Capabilities: [cc] #08 [a802] 0000:00:10.0 PCI bridge: nVidia Corporation: Unknown device 026f (rev a2) (prog-if 01 [Subtractive decode]) Flags: bus master, 66MHz, fast devsel, latency 0 Bus: primary=00, secondary=04, subordinate=04, sec-latency=32 I/O behind bridge: 0000c000-0000cfff Memory behind bridge: fdb00000-fdbfffff Prefetchable memory behind bridge: fda00000-fdafffff Capabilities: [b8] #0d [0000] Capabilities: [8c] #08 [a800] 0000:00:10.2 Multimedia audio controller: nVidia Corporation: Unknown device 026b (rev a2) Subsystem: Biostar Microtech Int'l Corp: Unknown device 8213 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 5 I/O ports at dc00 [size=256] I/O ports at d800 [size=256] Memory at fe02c000 (32-bit, non-prefetchable) [size=4K] Capabilities: [44] Power Management version 2 0000:00:14.0 Bridge: nVidia Corporation: Unknown device 0269 (rev a1) Subsystem: Biostar Microtech Int'l Corp: Unknown device 2501 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 20 Memory at fe02b000 (32-bit, non-prefetchable) [size=4K] I/O ports at d400 [size=8] Capabilities: [44] Power Management version 2 0000:00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge Flags: fast devsel Capabilities: [80] #08 [2101] 0000:00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge Flags: fast devsel 0000:00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge Flags: fast devsel 0000:00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge Flags: fast devsel ---- >8 ---- lspci -nv output: ---- 8< ---- 0000:00:00.0 0500: 10de:02f1 (rev a2) Flags: bus master, 66MHz, fast devsel, latency 0 Capabilities: [44] #08 [01e0] Capabilities: [e0] #08 [a800] 0000:00:00.1 0500: 10de:02fa (rev a2) Flags: 66MHz, fast devsel 0000:00:00.2 0500: 10de:02fe (rev a2) Flags: 66MHz, fast devsel 0000:00:00.3 0500: 10de:02f8 (rev a2) Flags: 66MHz, fast devsel 0000:00:00.4 0500: 10de:02f9 (rev a2) Flags: bus master, 66MHz, fast devsel, latency 0 0000:00:00.5 0500: 10de:02ff (rev a2) Flags: bus master, 66MHz, fast devsel, latency 0 Capabilities: [44] #00 [00fe] Capabilities: [fc] #00 [0000] 0000:00:00.6 0500: 10de:027f (rev a2) Flags: 66MHz, fast devsel 0000:00:00.7 0500: 10de:027e (rev a2) Flags: 66MHz, fast devsel 0000:00:02.0 0604: 10de:02fc (rev a1) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 0000a000-0000afff Memory behind bridge: fd700000-fd7fffff Prefetchable memory behind bridge: 00000000fde00000-00000000fde00000 Capabilities: [40] #0d [0000] Capabilities: [48] Power Management version 2 Capabilities: [50] Message Signalled Interrupts: 64bit+ Queue=0/1 Enable- Capabilities: [60] #08 [a800] Capabilities: [80] #10 [0141] 0000:00:03.0 0604: 10de:02fd (rev a1) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 00009000-00009fff Memory behind bridge: fdd00000-fddfffff Prefetchable memory behind bridge: 00000000fdc00000-00000000fdc00000 Capabilities: [40] #0d [0000] Capabilities: [48] Power Management version 2 Capabilities: [50] Message Signalled Interrupts: 64bit+ Queue=0/1 Enable- Capabilities: [60] #08 [a800] Capabilities: [80] #10 [0141] 0000:00:04.0 0604: 10de:02fb (rev a1) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 I/O behind bridge: 0000b000-0000bfff Memory behind bridge: fd900000-fd9fffff Prefetchable memory behind bridge: 00000000fd800000-00000000fd800000 Capabilities: [40] #0d [0000] Capabilities: [48] Power Management version 2 Capabilities: [50] Message Signalled Interrupts: 64bit+ Queue=0/1 Enable- Capabilities: [60] #08 [a800] Capabilities: [80] #10 [0141] 0000:00:05.0 0300: 10de:0242 (rev a2) Subsystem: 1565:1401 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 16 Memory at fb000000 (32-bit, non-prefetchable) [size=16M] Memory at d0000000 (64-bit, prefetchable) [size=256M] Memory at fc000000 (64-bit, non-prefetchable) [size=16M] Capabilities: [48] Power Management version 2 Capabilities: [50] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable- 0000:00:09.0 0500: 10de:0270 (rev a2) Subsystem: 10de:cb84 Flags: bus master, 66MHz, fast devsel, latency 0 Capabilities: [44] #08 [01e9] Capabilities: [e0] #08 [a800] 0000:00:0a.0 0601: 10de:0261 (rev a2) Subsystem: 1565:3402 Flags: bus master, 66MHz, fast devsel, latency 0 0000:00:0a.1 0c05: 10de:0264 (rev a2) Subsystem: 1565:3402 Flags: 66MHz, fast devsel, IRQ 10 I/O ports at 1c00 [size=64] I/O ports at 1c40 [size=64] Capabilities: [44] Power Management version 2 0000:00:0a.2 0500: 10de:0272 (rev a2) Subsystem: 1565:3402 Flags: 66MHz, fast devsel 0000:00:0b.0 0c03: 10de:026d (rev a2) (prog-if 10) Subsystem: 1565:3402 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 22 Memory at fe02f000 (32-bit, non-prefetchable) [size=4K] Capabilities: [44] Power Management version 2 0000:00:0b.1 0c03: 10de:026e (rev a2) (prog-if 20) Subsystem: 1565:3402 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 21 Memory at fe02e000 (32-bit, non-prefetchable) [size=256] Capabilities: [44] #0a [2098] Capabilities: [80] Power Management version 2 0000:00:0d.0 0101: 10de:0265 (rev a1) (prog-if 8a [Master SecP PriP]) Subsystem: 1565:3402 Flags: bus master, 66MHz, fast devsel, latency 0 I/O ports at f400 [size=16] Capabilities: [44] Power Management version 2 0000:00:0e.0 0101: 10de:0266 (rev a1) (prog-if 85 [Master SecO PriO]) Subsystem: 1565:5401 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 23 I/O ports at 09f0 [size=8] I/O ports at 0bf0 [size=4] I/O ports at 0970 [size=8] I/O ports at 0b70 [size=4] I/O ports at e000 [size=16] Memory at fe02d000 (32-bit, non-prefetchable) [size=4K] Capabilities: [44] Power Management version 2 Capabilities: [b0] Message Signalled Interrupts: 64bit+ Queue=0/2 Enable- Capabilities: [cc] #08 [a802] 0000:00:10.0 0604: 10de:026f (rev a2) (prog-if 01) Flags: bus master, 66MHz, fast devsel, latency 0 Bus: primary=00, secondary=04, subordinate=04, sec-latency=32 I/O behind bridge: 0000c000-0000cfff Memory behind bridge: fdb00000-fdbfffff Prefetchable memory behind bridge: fda00000-fdafffff Capabilities: [b8] #0d [0000] Capabilities: [8c] #08 [a800] 0000:00:10.2 0401: 10de:026b (rev a2) Subsystem: 1565:8213 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 5 I/O ports at dc00 [size=256] I/O ports at d800 [size=256] Memory at fe02c000 (32-bit, non-prefetchable) [size=4K] Capabilities: [44] Power Management version 2 0000:00:14.0 0680: 10de:0269 (rev a1) Subsystem: 1565:2501 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 20 Memory at fe02b000 (32-bit, non-prefetchable) [size=4K] I/O ports at d400 [size=8] Capabilities: [44] Power Management version 2 0000:00:18.0 0600: 1022:1100 Flags: fast devsel Capabilities: [80] #08 [2101] 0000:00:18.1 0600: 1022:1101 Flags: fast devsel 0000:00:18.2 0600: 1022:1102 Flags: fast devsel 0000:00:18.3 0600: 1022:1103 Flags: fast devsel ---- >8 ---- Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Assignee: Ben Collins Status: Unconfirmed Description: This bug report was requested by 'crimsun' in freenode/#ubuntu. crimsun intends to follow-up this bug upstream. Mainboard Manufacturer: Biostar(?); AMD(?) Mainboard Model: CRU51-M7 Additional Soundcard info: Onboard AC'97 Sound Codec; Chip = ALC655: http://www.realtek.com.tw/products/products1-2.aspx?modelid=2003051 Purpose of Bug Report: to provide information to identify PCI ID's for my hardware; output for 'lspci -v' and 'lspci -nv' follows below. lspci -v output: ---- 8< ---- 0000:00:00.0 RAM memory: nVidia Corporation: Unknown device 02f1 (rev a2) Flags: bus master, 66MHz, fast devsel, latency 0 Capabilities: [44] #08 [01e0] Capabilities: [e0] #08 [a800] 0000:00:00.1 RAM memory: nVidia Corporation: Unknown device 02fa (rev a2) Flags: 66MHz, fast devsel 0000:00:00.2 RAM memory: nVidia Corporation: Unknown device 02fe (rev a2) Flags: 66MHz, fast devsel 0000:00:00.3 RAM memory: nVidia Corporation: Unknown device 02f8 (rev a2) Flags: 66MHz, fast devsel 0000:00:00.4 RAM memory: nVidia Corporation: Unknown device 02f9 (rev a2) Flags: bus master, 66MHz, fast devsel, latency 0 0000:00:00.5 RAM memory: nVidia Corporation: Unknown device 02ff (rev a2) Flags: bus master, 66MHz, fast devsel, latency 0 Capabilities: [44] #00 [00fe] Capabilities: [fc] #00 [0000] 0000:00:00.6 RAM memory: nVidia Corporation: Unknown device 027f (rev a2) Flags: 66MHz, fast devsel 0000:00:00.7 RAM memory: nVidia Corporation: Unknown device 027e (rev a2) Flags: 66MHz, fast devsel 0000:00:02.0 PCI bridge: nVidia Corporation: Unknown device 02fc (rev a1) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 0000a000-0000afff Memory behind bridge: fd700000-fd7fffff Prefetchable memory behind bridge: 00000000fde00000-00000000fde00000 Capabilities: [40] #0d [0000] Capabilities: [48] Power Management version 2 Capabilities: [50] Message Signalled Interrupts: 64bit+ Queue=0/1 Enable- Capabilities: [60] #08 [a800] Capabilities: [80] #10 [0141] 0000:00:03.0 PCI bridge: nVidia Corporation: Unknown device 02fd (rev a1) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 00009000-00009fff Memory behind bridge: fdd00000-fddfffff Prefetchable memory behind bridge: 00000000fdc00000-00000000fdc00000 Capabilities: [40] #0d [0000] Capabilities: [48] Power Management version 2 Capabilities: [50] Message Signalled Interrupts: 64bit+ Queue=0/1 Enable- Capabilities: [60] #08 [a800] Capabilities: [80] #10 [0141] 0000:00:04.0 PCI bridge: nVidia Corporation: Unknown device 02fb (rev a1) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 I/O behind bridge: 0000b000-0000bfff Memory behind bridge: fd900000-fd9fffff Prefetchable memory behind bridge: 00000000fd800000-00000000fd800000 Capabilities: [40] #0d [0000] Capabilities: [48] Power Management version 2 Capabilities: [50] Message Signalled Interrupts: 64bit+ Queue=0/1 Enable- Capabilities: [60] #08 [a800] Capabilities: [80] #10 [0141] 0000:00:05.0 VGA compatible controller: nVidia Corporation: Unknown device 0242 (rev a2) (prog-if 00 [VGA]) Subsystem: Biostar Microtech Int'l Corp: Unknown device 1401 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 16 Memory at fb000000 (32-bit, non-prefetchable) [size=16M] Memory at d0000000 (64-bit, prefetchable) [size=256M] Memory at fc000000 (64-bit, non-prefetchable) [size=16M] Capabilities: [48] Power Management version 2 Capabilities: [50] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable- 0000:00:09.0 RAM memory: nVidia Corporation: Unknown device 0270 (rev a2) Subsystem: nVidia Corporation: Unknown device cb84 Flags: bus master, 66MHz, fast devsel, latency 0 Capabilities: [44] #08 [01e9] Capabilities: [e0] #08 [a800] 0000:00:0a.0 ISA bridge: nVidia Corporation: Unknown device 0261 (rev a2) Subsystem: Biostar Microtech Int'l Corp: Unknown device 3402 Flags: bus master, 66MHz, fast devsel, latency 0 0000:00:0a.1 SMBus: nVidia Corporation: Unknown device 0264 (rev a2) Subsystem: Biostar Microtech Int'l Corp: Unknown device 3402 Flags: 66MHz, fast devsel, IRQ 10 I/O ports at 1c00 [size=64] I/O ports at 1c40 [size=64] Capabilities: [44] Power Management version 2 0000:00:0a.2 RAM memory: nVidia Corporation: Unknown device 0272 (rev a2) Subsystem: Biostar Microtech Int'l Corp: Unknown device 3402 Flags: 66MHz, fast devsel 0000:00:0b.0 USB Controller: nVidia Corporation: Unknown device 026d (rev a2) (prog-if 10 [OHCI]) Subsystem: Biostar Microtech Int'l Corp: Unknown device 3402 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 22 Memory at fe02f000 (32-bit, non-prefetchable) [size=4K] Capabilities: [44] Power Management version 2 0000:00:0b.1 USB Controller: nVidia Corporation: Unknown device 026e (rev a2) (prog-if 20 [EHCI]) Subsystem: Biostar Microtech Int'l Corp: Unknown device 3402 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 21 Memory at fe02e000 (32-bit, non-prefetchable) [size=256] Capabilities: [44] #0a [2098] Capabilities: [80] Power Management version 2 0000:00:0d.0 IDE interface: nVidia Corporation: Unknown device 0265 (rev a1) (prog-if 8a [Master SecP PriP]) Subsystem: Biostar Microtech Int'l Corp: Unknown device 3402 Flags: bus master, 66MHz, fast devsel, latency 0 I/O ports at f400 [size=16] Capabilities: [44] Power Management version 2 0000:00:0e.0 IDE interface: nVidia Corporation: Unknown device 0266 (rev a1) (prog-if 85 [Master SecO PriO]) Subsystem: Biostar Microtech Int'l Corp: Unknown device 5401 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 23 I/O ports at 09f0 [size=8] I/O ports at 0bf0 [size=4] I/O ports at 0970 [size=8] I/O ports at 0b70 [size=4] I/O ports at e000 [size=16] Memory at fe02d000 (32-bit, non-prefetchable) [size=4K] Capabilities: [44] Power Management version 2 Capabilities: [b0] Message Signalled Interrupts: 64bit+ Queue=0/2 Enable- Capabilities: [cc] #08 [a802] 0000:00:10.0 PCI bridge: nVidia Corporation: Unknown device 026f (rev a2) (prog-if 01 [Subtractive decode]) Flags: bus master, 66MHz, fast devsel, latency 0 Bus: primary=00, secondary=04, subordinate=04, sec-latency=32 I/O behind bridge: 0000c000-0000cfff Memory behind bridge: fdb00000-fdbfffff Prefetchable memory behind bridge: fda00000-fdafffff Capabilities: [b8] #0d [0000] Capabilities: [8c] #08 [a800] 0000:00:10.2 Multimedia audio controller: nVidia Corporation: Unknown device 026b (rev a2) Subsystem: Biostar Microtech Int'l Corp: Unknown device 8213 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 5 I/O ports at dc00 [size=256] I/O ports at d800 [size=256] Memory at fe02c000 (32-bit, non-prefetchable) [size=4K] Capabilities: [44] Power Management version 2 0000:00:14.0 Bridge: nVidia Corporation: Unknown device 0269 (rev a1) Subsystem: Biostar Microtech Int'l Corp: Unknown device 2501 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 20 Memory at fe02b000 (32-bit, non-prefetchable) [size=4K] I/O ports at d400 [size=8] Capabilities: [44] Power Management version 2 0000:00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge Flags: fast devsel Capabilities: [80] #08 [2101] 0000:00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge Flags: fast devsel 0000:00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge Flags: fast devsel 0000:00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge Flags: fast devsel ---- >8 ---- lspci -nv output: ---- 8< ---- 0000:00:00.0 0500: 10de:02f1 (rev a2) Flags: bus master, 66MHz, fast devsel, latency 0 Capabilities: [44] #08 [01e0] Capabilities: [e0] #08 [a800] 0000:00:00.1 0500: 10de:02fa (rev a2) Flags: 66MHz, fast devsel 0000:00:00.2 0500: 10de:02fe (rev a2) Flags: 66MHz, fast devsel 0000:00:00.3 0500: 10de:02f8 (rev a2) Flags: 66MHz, fast devsel 0000:00:00.4 0500: 10de:02f9 (rev a2) Flags: bus master, 66MHz, fast devsel, latency 0 0000:00:00.5 0500: 10de:02ff (rev a2) Flags: bus master, 66MHz, fast devsel, latency 0 Capabilities: [44] #00 [00fe] Capabilities: [fc] #00 [0000] 0000:00:00.6 0500: 10de:027f (rev a2) Flags: 66MHz, fast devsel 0000:00:00.7 0500: 10de:027e (rev a2) Flags: 66MHz, fast devsel 0000:00:02.0 0604: 10de:02fc (rev a1) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 0000a000-0000afff Memory behind bridge: fd700000-fd7fffff Prefetchable memory behind bridge: 00000000fde00000-00000000fde00000 Capabilities: [40] #0d [0000] Capabilities: [48] Power Management version 2 Capabilities: [50] Message Signalled Interrupts: 64bit+ Queue=0/1 Enable- Capabilities: [60] #08 [a800] Capabilities: [80] #10 [0141] 0000:00:03.0 0604: 10de:02fd (rev a1) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 00009000-00009fff Memory behind bridge: fdd00000-fddfffff Prefetchable memory behind bridge: 00000000fdc00000-00000000fdc00000 Capabilities: [40] #0d [0000] Capabilities: [48] Power Management version 2 Capabilities: [50] Message Signalled Interrupts: 64bit+ Queue=0/1 Enable- Capabilities: [60] #08 [a800] Capabilities: [80] #10 [0141] 0000:00:04.0 0604: 10de:02fb (rev a1) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 I/O behind bridge: 0000b000-0000bfff Memory behind bridge: fd900000-fd9fffff Prefetchable memory behind bridge: 00000000fd800000-00000000fd800000 Capabilities: [40] #0d [0000] Capabilities: [48] Power Management version 2 Capabilities: [50] Message Signalled Interrupts: 64bit+ Queue=0/1 Enable- Capabilities: [60] #08 [a800] Capabilities: [80] #10 [0141] 0000:00:05.0 0300: 10de:0242 (rev a2) Subsystem: 1565:1401 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 16 Memory at fb000000 (32-bit, non-prefetchable) [size=16M] Memory at d0000000 (64-bit, prefetchable) [size=256M] Memory at fc000000 (64-bit, non-prefetchable) [size=16M] Capabilities: [48] Power Management version 2 Capabilities: [50] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable- 0000:00:09.0 0500: 10de:0270 (rev a2) Subsystem: 10de:cb84 Flags: bus master, 66MHz, fast devsel, latency 0 Capabilities: [44] #08 [01e9] Capabilities: [e0] #08 [a800] 0000:00:0a.0 0601: 10de:0261 (rev a2) Subsystem: 1565:3402 Flags: bus master, 66MHz, fast devsel, latency 0 0000:00:0a.1 0c05: 10de:0264 (rev a2) Subsystem: 1565:3402 Flags: 66MHz, fast devsel, IRQ 10 I/O ports at 1c00 [size=64] I/O ports at 1c40 [size=64] Capabilities: [44] Power Management version 2 0000:00:0a.2 0500: 10de:0272 (rev a2) Subsystem: 1565:3402 Flags: 66MHz, fast devsel 0000:00:0b.0 0c03: 10de:026d (rev a2) (prog-if 10) Subsystem: 1565:3402 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 22 Memory at fe02f000 (32-bit, non-prefetchable) [size=4K] Capabilities: [44] Power Management version 2 0000:00:0b.1 0c03: 10de:026e (rev a2) (prog-if 20) Subsystem: 1565:3402 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 21 Memory at fe02e000 (32-bit, non-prefetchable) [size=256] Capabilities: [44] #0a [2098] Capabilities: [80] Power Management version 2 0000:00:0d.0 0101: 10de:0265 (rev a1) (prog-if 8a [Master SecP PriP]) Subsystem: 1565:3402 Flags: bus master, 66MHz, fast devsel, latency 0 I/O ports at f400 [size=16] Capabilities: [44] Power Management version 2 0000:00:0e.0 0101: 10de:0266 (rev a1) (prog-if 85 [Master SecO PriO]) Subsystem: 1565:5401 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 23 I/O ports at 09f0 [size=8] I/O ports at 0bf0 [size=4] I/O ports at 0970 [size=8] I/O ports at 0b70 [size=4] I/O ports at e000 [size=16] Memory at fe02d000 (32-bit, non-prefetchable) [size=4K] Capabilities: [44] Power Management version 2 Capabilities: [b0] Message Signalled Interrupts: 64bit+ Queue=0/2 Enable- Capabilities: [cc] #08 [a802] 0000:00:10.0 0604: 10de:026f (rev a2) (prog-if 01) Flags: bus master, 66MHz, fast devsel, latency 0 Bus: primary=00, secondary=04, subordinate=04, sec-latency=32 I/O behind bridge: 0000c000-0000cfff Memory behind bridge: fdb00000-fdbfffff Prefetchable memory behind bridge: fda00000-fdafffff Capabilities: [b8] #0d [0000] Capabilities: [8c] #08 [a800] 0000:00:10.2 0401: 10de:026b (rev a2) Subsystem: 1565:8213 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 5 I/O ports at dc00 [size=256] I/O ports at d800 [size=256] Memory at fe02c000 (32-bit, non-prefetchable) [size=4K] Capabilities: [44] Power Management version 2 0000:00:14.0 0680: 10de:0269 (rev a1) Subsystem: 1565:2501 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 20 Memory at fe02b000 (32-bit, non-prefetchable) [size=4K] I/O ports at d400 [size=8] Capabilities: [44] Power Management version 2 0000:00:18.0 0600: 1022:1100 Flags: fast devsel Capabilities: [80] #08 [2101] 0000:00:18.1 0600: 1022:1101 Flags: fast devsel 0000:00:18.2 0600: 1022:1102 Flags: fast devsel 0000:00:18.3 0600: 1022:1103 Flags: fast devsel ---- >8 ---- -- Onboard ALC655 soundcard not supported https://launchpad.net/malone/bugs/6354 From mdz at ubuntu.com Sat Apr 1 01:41:59 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Sat, 01 Apr 2006 01:41:59 -0000 Subject: [Bug 27888] Re: [DAPPER] ndiswrapper not working with kernel 2.6.15 (AMD64) References: <20060113151945.29386.46469.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060401014200.23707.60441.launchpad@gandwana.ubuntu.com> ** Changed in: ndiswrapper (Ubuntu) Sourcepackagename: ndiswrapper => linux-source-2.6.15 Assignee: (unassigned) => Ben Collins -- [DAPPER] ndiswrapper not working with kernel 2.6.15 (AMD64) https://launchpad.net/malone/bugs/27888 From mdz at ubuntu.com Sat Apr 1 01:47:11 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Sat, 01 Apr 2006 01:47:11 -0000 Subject: [Bug 6354] Re: Onboard ALC655 soundcard not supported References: <20060102002823.29335.6537.malonedeb@gangotri.ubuntu.com> Message-ID: <20060401014712.23707.98663.launchpad@gandwana.ubuntu.com> ** Changed in: alsa-driver (Ubuntu) Sourcepackagename: alsa-driver => linux-source-2.6.15 Assignee: (unassigned) => Ben Collins -- Onboard ALC655 soundcard not supported https://launchpad.net/malone/bugs/6354 From rob.markovic at gmail.com Sat Apr 1 01:51:37 2006 From: rob.markovic at gmail.com (Robi) Date: Sat, 01 Apr 2006 01:51:37 -0000 Subject: [Bug 27422] Re: [Bug 27422] Re: USB Wi-Fi AirVast not detected References: <20060113145426.21012.92636.launchpad@macquarie.warthogs.hbd.com> <20060401002645.5415.51405.malone@gangotri.ubuntu.com> Message-ID: <97a9d8c80603311751h74510e41oc469c03ebeef3237@mail.gmail.com> I have tried it in the dapper flight2 release, but not recent. If code hasn't changed since then, good bet it's still broken. -- Rob On 3/31/06, Matt Zimmerman wrote: > Is this still the case in current Dapper? > > ** Changed in: linux-wlan-ng (Ubuntu) > Sourcepackagename: linux-wlan-ng => linux-source-2.6.15 > Binarypackagename: linux-wlan-ng => None > Assignee: (unassigned) => Ben Collins > Status: Unconfirmed => Needs Info > -- > USB Wi-Fi AirVast not detected > https://launchpad.net/malone/bugs/27422 > -- USB Wi-Fi AirVast not detected https://launchpad.net/malone/bugs/27422 From keifer.miller at gmail.com Sat Apr 1 02:02:25 2006 From: keifer.miller at gmail.com (keifer miller) Date: Sat, 01 Apr 2006 02:02:25 -0000 Subject: [Bug 34508] Re: 2.6.15 kernel fails to boot on ppc machine References: <20060311210305.30082.75520.malonedeb@gandwana.ubuntu.com> Message-ID: <20060401020225.5441.72139.malone@gangotri.ubuntu.com> Installed the kernel on a (kubuntu) install, and it worked for me -- sort of. The kernel sets at "loading ramdisk" for a loooonish (tm) time. It takes much longer to load than reasonable, but it does. Once it loads, it appears to jump straight to gdm/kdm/etc; skiping any initrd/bootsplash messages. I'm guessing that it isn't actualy hanging at the 'ramdisk' line, but rather, it stops printing output until X11 kicks in. Also, booting with "Linux debug" still doesn't seem to work for me. But hey, it's progress. -- 2.6.15 kernel fails to boot on ppc machine https://launchpad.net/malone/bugs/34508 From zooko at zooko.com Sat Apr 1 03:31:58 2006 From: zooko at zooko.com (Zooko O'Whielacronx) Date: Sat, 01 Apr 2006 03:31:58 -0000 Subject: [Bug 6032] sound doesn't work (via 8233/ac97) References: <20051222003637.24593.90397.malonedeb@gangotri.ubuntu.com> Message-ID: <20060401033158.23733.32621.launchpad@canonical@gandwana.ubuntu.com> Public bug reported: Affects: alsa-driver (upstream) Severity: Unknown Priority: Unknown Status: Unknown Affects: alsa-utils (Ubuntu) Severity: Normal Priority: (none set) Status: Rejected Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: Wontfix Assignee: Ubuntu Kernel Team Status: Confirmed Description: Sound is burst/spotty and sometimes stops for good. I experimented by rmmod'ing all of the sound modules (there were a lot of them, including, it seems, both oss and alsa modules), and then modprobing snd-via82xx. This allows "aplay bong.au" to work, but when I run "ogg123 last\ call.ogg" then it goes back into burst/spotty/silent mode. Whenever I modprobe snd-via82xx (after first rmmodding everything), my syslog gets this: Dec 21 20:00:44 localhost kernel: [ 1127.904611] via82xx: Assuming DXS channels with 48k fixed sample rate. Dec 21 20:00:44 localhost kernel: [ 1127.904619] Please try dxs_support=5 option Dec 21 20:00:44 localhost kernel: [ 1127.904623] and report if it works on your machine. Dec 21 20:00:44 localhost kernel: [ 1127.904626] For more details, read ALSA-Configuration.txt. Dec 21 20:00:44 localhost kernel: [ 1127.904680] PCI: Setting latency timer of device 0000:00:11.5 to 64 aplay -l says this: **** List of PLAYBACK Hardware Devices **** card 0: V8237 [VIA 8237], device 0: VIA 8237 [VIA 8237] Subdevices: 4/4 Subdevice #0: subdevice #0 Subdevice #1: subdevice #1 Subdevice #2: subdevice #2 Subdevice #3: subdevice #3 card 0: V8237 [VIA 8237], device 1: VIA 8237 [VIA 8237] Subdevices: 1/1 Subdevice #0: subdevice #0 lspci says: 0000:00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 60) uname -a says: Linux newcomputer 2.6.12-10-386 #1 Fri Nov 18 11:51:02 UTC 2005 i686 GNU/Linux Public bug reported: Affects: alsa-driver (upstream) Severity: Unknown Priority: Unknown Status: Unknown Affects: alsa-utils (Ubuntu) Severity: Normal Priority: (none set) Status: Rejected Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: Wontfix Assignee: Ubuntu Kernel Team Status: Confirmed Description: Sound is burst/spotty and sometimes stops for good. I experimented by rmmod'ing all of the sound modules (there were a lot of them, including, it seems, both oss and alsa modules), and then modprobing snd-via82xx. This allows "aplay bong.au" to work, but when I run "ogg123 last\ call.ogg" then it goes back into burst/spotty/silent mode. Whenever I modprobe snd-via82xx (after first rmmodding everything), my syslog gets this: Dec 21 20:00:44 localhost kernel: [ 1127.904611] via82xx: Assuming DXS channels with 48k fixed sample rate. Dec 21 20:00:44 localhost kernel: [ 1127.904619] Please try dxs_support=5 option Dec 21 20:00:44 localhost kernel: [ 1127.904623] and report if it works on your machine. Dec 21 20:00:44 localhost kernel: [ 1127.904626] For more details, read ALSA-Configuration.txt. Dec 21 20:00:44 localhost kernel: [ 1127.904680] PCI: Setting latency timer of device 0000:00:11.5 to 64 aplay -l says this: **** List of PLAYBACK Hardware Devices **** card 0: V8237 [VIA 8237], device 0: VIA 8237 [VIA 8237] Subdevices: 4/4 Subdevice #0: subdevice #0 Subdevice #1: subdevice #1 Subdevice #2: subdevice #2 Subdevice #3: subdevice #3 card 0: V8237 [VIA 8237], device 1: VIA 8237 [VIA 8237] Subdevices: 1/1 Subdevice #0: subdevice #0 lspci says: 0000:00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 60) uname -a says: Linux newcomputer 2.6.12-10-386 #1 Fri Nov 18 11:51:02 UTC 2005 i686 GNU/Linux -- sound doesn't work (via 8233/ac97) https://launchpad.net/malone/bugs/6032 From mdz at ubuntu.com Sat Apr 1 03:33:13 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Sat, 01 Apr 2006 03:33:13 -0000 Subject: [Bug 28017] Re: Clock runs fast on Athlon 64 Dual Core References: <20060113152023.29386.93719.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060401033313.5415.34685.launchpad@gangotri.ubuntu.com> *** This bug is a duplicate of bug 25922 *** ** This bug has been marked a duplicate of bug 25922 Large clock skew with dual-core amd64 -- Clock runs fast on Athlon 64 Dual Core https://launchpad.net/malone/bugs/28017 From mdz at ubuntu.com Sat Apr 1 03:33:13 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Sat, 01 Apr 2006 03:33:13 -0000 Subject: [Bug 25922] Re: Large clock skew with dual-core amd64 References: <20060113144658.21012.7149.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060401033313.5415.8926.launchpad@gangotri.ubuntu.com> ** Bug 28017 has been marked a duplicate of this bug -- Large clock skew with dual-core amd64 https://launchpad.net/malone/bugs/25922 From mdz at ubuntu.com Sat Apr 1 03:31:41 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Sat, 01 Apr 2006 03:31:41 -0000 Subject: [Bug 6032] Re: sound doesn't work (via 8233/ac97) References: <20051222003637.24593.90397.malonedeb@gangotri.ubuntu.com> Message-ID: <20060401033141.5441.34307.malone@gangotri.ubuntu.com> There is no bug in alsa-utils here, and this bug is already attached to the kernel where it belongs ** Changed in: alsa-utils (Ubuntu) Status: Unconfirmed => Rejected ** Changed in: linux-source-2.6.12 (Ubuntu) Sourcepackagename: linux-source-2.6.12 => linux-source-2.6.15 -- sound doesn't work (via 8233/ac97) https://launchpad.net/malone/bugs/6032 From killallthehumans at gmail.com Sat Apr 1 05:20:27 2006 From: killallthehumans at gmail.com (Bizzeh) Date: Sat, 01 Apr 2006 05:20:27 -0000 Subject: [Bug 29460] Boot Crash with SMP K8 Kernel References: <20060123165300.28395.60982.malonedeb@gangotri.ubuntu.com> Message-ID: <20060401052027.5415.90662.launchpad@canonical@gangotri.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Assignee: Ben Collins Status: Needs Info Description: Ubuntu 5.10 standard install, Upgraded to amd64-k8-smp kernel, when i rebooted, i loaded the new kernel with grub and it loads as normal untill it gets to syncing clock with ntp.ubuntu..... then it just locks and does nothing. everything works fine with a non-smp kernel. hardware: Motherboard: GIGABYTE K8NF9 (nForce4 Chipset) CPU: AMD64 x2 4200 RAM: 1.5gb Unbranded DDR400 Network: Onboard nForce4 1Gbit WireLess: MSI PC54G2 (PCI) (Ralink RT2500 Chipset) Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Assignee: Ben Collins Status: Needs Info Description: Ubuntu 5.10 standard install, Upgraded to amd64-k8-smp kernel, when i rebooted, i loaded the new kernel with grub and it loads as normal untill it gets to syncing clock with ntp.ubuntu..... then it just locks and does nothing. everything works fine with a non-smp kernel. hardware: Motherboard: GIGABYTE K8NF9 (nForce4 Chipset) CPU: AMD64 x2 4200 RAM: 1.5gb Unbranded DDR400 Network: Onboard nForce4 1Gbit WireLess: MSI PC54G2 (PCI) (Ralink RT2500 Chipset) -- Boot Crash with SMP K8 Kernel https://launchpad.net/malone/bugs/29460 From mdz at ubuntu.com Sat Apr 1 05:20:26 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Sat, 01 Apr 2006 05:20:26 -0000 Subject: [Bug 29460] Re: Boot Crash with SMP K8 Kernel References: <20060123165300.28395.60982.malonedeb@gangotri.ubuntu.com> Message-ID: <20060401052027.5415.34899.malone@gangotri.ubuntu.com> Please follow the instructions at https://wiki.ubuntu.com/DebuggingSystemCrash ** Changed in: Ubuntu Sourcepackagename: None => linux-source-2.6.15 Assignee: (unassigned) => Ben Collins Status: Unconfirmed => Needs Info -- Boot Crash with SMP K8 Kernel https://launchpad.net/malone/bugs/29460 From autocrosser at macdialup.com Sat Apr 1 06:13:19 2006 From: autocrosser at macdialup.com (Dean Loros) Date: Sat, 01 Apr 2006 06:13:19 -0000 Subject: [Bug 37553] Timing error with kernel References: <20060401061319.5415.17446.malonedeb@gangotri.ubuntu.com> Message-ID: <20060401061319.5415.17446.malonedeb@gangotri.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 linux-image-2.6.15-19-powerpc-smp (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: Time/date will randomly go from current time/date to a time/date in the future or past--will cause most apps to crash randomly or start randomly (xscreensaver--gnomescreensaver will start repeatedly within a matter of minutes) Dial up will "time-out" within seconds--seems to be a timing issue between the two processors--single processor kernel acts normally with all else the same. -- Timing error with kernel https://launchpad.net/malone/bugs/37553 From vyruss at freemail.gr Sat Apr 1 06:21:48 2006 From: vyruss at freemail.gr (Jimmy Angelakos) Date: Sat, 01 Apr 2006 06:21:48 -0000 Subject: [Bug 37554] USB Printing problem References: <20060401062148.5415.53902.malonedeb@gangotri.ubuntu.com> Message-ID: <20060401062148.5415.53902.malonedeb@gangotri.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: I was unable to print on my Konica Minolta PagePro 1300W ever since I switched from Breezy to Dapper. I've tried solutions involving drivers and CUPS but everything appears to work normally except I can't print, and CUPS simply says: Printer off-line. However I was made very suspicious by this thread: http://www.linuxprinting.org/forums.cgi?group=linuxprinting.minolta.general;article=578 and now I believe that the Kernel is to blame for this. My printer appears to be connected normally, and I can install it perfectly well from gnome-cups-manager. However it does not receive any data (the light does not flash) when the GUI shows it is supposed to be printing. -- USB Printing problem https://launchpad.net/malone/bugs/37554 From vyruss at freemail.gr Sat Apr 1 06:22:45 2006 From: vyruss at freemail.gr (Jimmy Angelakos) Date: Sat, 01 Apr 2006 06:22:45 -0000 Subject: [Bug 37554] Re: USB Printing problem References: <20060401062148.5415.53902.malonedeb@gangotri.ubuntu.com> Message-ID: <20060401062245.5441.89874.malone@gangotri.ubuntu.com> When I turn on my printer, dmesg says: [4295953.738000] usb 2-2: new full speed USB device using uhci_hcd and address 4 [4295953.871000] drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 4 if 0 alt 0 proto 2 vid 0x0686 pid 0x300C -- USB Printing problem https://launchpad.net/malone/bugs/37554 From vyruss at freemail.gr Sat Apr 1 06:27:02 2006 From: vyruss at freemail.gr (Jimmy Angelakos) Date: Sat, 01 Apr 2006 06:27:02 -0000 Subject: [Bug 37554] Re: USB Printing problem References: <20060401062148.5415.53902.malonedeb@gangotri.ubuntu.com> Message-ID: <20060401062702.23733.18332.malone@gandwana.ubuntu.com> When I try to print a test page, /var/log/cups/error_log says: I [01/Apr/2006:09:25:49 +0300] Adding start banner page "none" to job 4. I [01/Apr/2006:09:25:49 +0300] Adding end banner page "none" to job 4. I [01/Apr/2006:09:25:49 +0300] Job 4 queued on "PagePro-1300W" by "vyruss". I [01/Apr/2006:09:25:49 +0300] Started filter /usr/lib/cups/filter/pstops (PID 8711) for job 4. I [01/Apr/2006:09:25:49 +0300] Started filter /usr/lib/cups/filter/foomatic-rip (PID 8712) for job 4. I [01/Apr/2006:09:25:49 +0300] Started backend /usr/lib/cups/backend/usb (PID 8713) for job 4. W [01/Apr/2006:09:25:49 +0300] [Job 4] Printer off-line. and it continues saying "Printer off-line" forever. -- USB Printing problem https://launchpad.net/malone/bugs/37554 From crimsun at fungus.sh.nu Sat Apr 1 07:11:25 2006 From: crimsun at fungus.sh.nu (Daniel T. Chen) Date: Sat, 01 Apr 2006 07:11:25 -0000 Subject: [Bug 6354] Re: Onboard ALC655 soundcard not supported References: <20060102002823.29335.6537.malonedeb@gangotri.ubuntu.com> Message-ID: <20060401071125.5441.61802.malone@gangotri.ubuntu.com> https://lists.ubuntu.com/archives/kernel-team/2006-April/000794.html ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Unconfirmed => Fix Committed -- Onboard ALC655 soundcard not supported https://launchpad.net/malone/bugs/6354 From crimsun at fungus.sh.nu Sat Apr 1 07:22:10 2006 From: crimsun at fungus.sh.nu (Daniel T. Chen) Date: Sat, 01 Apr 2006 07:22:10 -0000 Subject: [Bug 6032] Re: sound doesn't work (via 8233/ac97) References: <20051222003637.24593.90397.malonedeb@gangotri.ubuntu.com> Message-ID: <20060401072210.5415.27814.malone@gangotri.ubuntu.com> Zooko, please test a live cd of Dapper Flight 6 (just released), and attach the output from ``lspci -v && lspci -nv && tail -2 /proc/asound/oss/sndstat && amixer -c0''. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Confirmed => Needs Info -- sound doesn't work (via 8233/ac97) https://launchpad.net/malone/bugs/6032 From 84yelo3 at gmail.com Sat Apr 1 08:53:18 2006 From: 84yelo3 at gmail.com (=?utf-8?q?Nicol=C3=B2_Chieffo?=) Date: Sat, 01 Apr 2006 08:53:18 -0000 Subject: [Bug 36885] Re: Asus laptop hangs on TFT/VGA video switch (Fn-F8) References: <20060327182219.6279.42415.malonedeb@gandwana.ubuntu.com> Message-ID: <20060401085318.23733.346.malone@gandwana.ubuntu.com> I tried it with a monitod connected to my VGA connector. Unfortunately I got the same results. (and the monitor was always black, after starting X and again after pressing the hotkey) -- Asus laptop hangs on TFT/VGA video switch (Fn-F8) https://launchpad.net/malone/bugs/36885 From cjwatson at canonical.com Sat Apr 1 09:31:56 2006 From: cjwatson at canonical.com (Colin Watson) Date: Sat, 01 Apr 2006 09:31:56 -0000 Subject: [Bug 13575] Re: NTFS-fs error (device sdaX): ntfs_ucstonls(): Unicode name contains characters that cannot be converted to character set cp437 References: <20060113133155.21012.39265.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060401093156.5415.79051.malone@gangotri.ubuntu.com> I've made the installer set UTF-8 by default now, so at least new installations of dapper will be fine. I don't think we can really change this on upgrades. partman-basicfilesystems (46ubuntu3) dapper; urgency=low * Mount FAT with iocharset=utf8; see previous comment about NTFS. -- Colin Watson Sat, 1 Apr 2006 10:28:44 +0100 partman-basicfilesystems (46ubuntu2) dapper; urgency=low * Mount FAT and NTFS filesystems at boot (fstab pass 1). * Mount NTFS with nls=utf8, which is always correct for Ubuntu systems and avoids files going missing due to their names containing unconvertable characters (suggestion from Malone bug #25071). * Mount FAT and NTFS with umask=007,gid=46 (static group plugdev), so that users can easily be given privileges to read/write mounted Windows filesystems, and so that the first user can do so automatically (closes: Malone #8048, #25071). -- Colin Watson Sat, 1 Apr 2006 09:59:59 +0100 ** Changed in: Ubuntu Sourcepackagename: None => partman-basicfilesystems Status: Unconfirmed => Fix Released -- NTFS-fs error (device sdaX): ntfs_ucstonls(): Unicode name contains characters that cannot be converted to character set cp437 https://launchpad.net/malone/bugs/13575 From frederik.van.slycken at gmail.com Sat Apr 1 09:45:54 2006 From: frederik.van.slycken at gmail.com (Black Horizon) Date: Sat, 01 Apr 2006 09:45:54 -0000 Subject: [Bug 6029] Re: screen flickers with vga16fb References: <20051221214735.24631.23284.malonedeb@gangotri.ubuntu.com> Message-ID: <20060401094554.5441.80566.malone@gangotri.ubuntu.com> I currently do not have Dapper, is that a stable release already or not? all downloads seem to be for 5.10 (Breezy) I have however upgraded everything with Synaptic (including kernel and all) and the problem is still the same -- screen flickers with vga16fb https://launchpad.net/malone/bugs/6029 From federico.sassi1 at studenti.unipr.it Sat Apr 1 10:41:18 2006 From: federico.sassi1 at studenti.unipr.it (Federico Sassi) Date: Sat, 01 Apr 2006 10:41:18 -0000 Subject: [Bug 25673] Re: Keyboard and touchpad doesn't work after suspend-to-ram on a Fujitsu-Siemens Amilo M1420 References: <20060113143457.21012.29014.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060401104118.5415.24138.malone@gangotri.ubuntu.com> I've just tested over my 2.6.15-19-686 kernel in dapper. With fglrx driver running the hibernation work flawlessy, but the system doesn't even go into suspend. With open-source driver (ati) the hibernation works great. When I suspend to ram the system suspends correctly but when it wakes up I got NO keyboard and NO touchpad....exactly like in breezy! If you need more info, just tell me! Thanks really much! Federico -- Keyboard and touchpad doesn't work after suspend-to-ram on a Fujitsu-Siemens Amilo M1420 https://launchpad.net/malone/bugs/25673 From vincent.trouilliez at modulonet.fr Sat Apr 1 10:52:07 2006 From: vincent.trouilliez at modulonet.fr (Trouilliez vincent) Date: Sat, 01 Apr 2006 10:52:07 -0000 Subject: [Bug 27233] Re: CPU temperature always reported as 22 References: <20060113145332.21012.37435.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060401105207.23733.85649.malone@gandwana.ubuntu.com> Yes, the problem is still exactly the same in up to date Dapper. -- CPU temperature always reported as 22 https://launchpad.net/malone/bugs/27233 From cjwatson at canonical.com Sat Apr 1 11:08:09 2006 From: cjwatson at canonical.com (Colin Watson) Date: Sat, 01 Apr 2006 11:08:09 -0000 Subject: [Bug 36791] Re: Wireless adapter Broadcom 4306 does not activate References: <20060326230519.20514.38613.malonedeb@gangotri.ubuntu.com> Message-ID: <20060401110809.5415.80515.malone@gangotri.ubuntu.com> You need to get firmware for the BCM43xx cards; we don't have a licence to distribute that firmware so we can't make this work automatically. If you haven't done so already, try installing the bcm43xx-fwcutter package from universe and running the /usr/share/bcm43xx-fwcutter/install_bcm43xx_firmware.sh script. -- Wireless adapter Broadcom 4306 does not activate https://launchpad.net/malone/bugs/36791 From javiermon at gmail.com Sat Apr 1 11:15:47 2006 From: javiermon at gmail.com (kmon) Date: Sat, 01 Apr 2006 11:15:47 -0000 Subject: [Bug 37576] APIC error on CPU0: 40(40) References: <20060401111547.5441.66321.malonedeb@gangotri.ubuntu.com> Message-ID: <20060401111547.5441.66321.malonedeb@gangotri.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: Hi I keep getting this kind of errors on dmesg. I'm using dapper up to date, on an acer ferrari 4005. Thanxs ** Attachment added: "dmesg > dmesg.txt" http://librarian.launchpad.net/1903678/dmesg.txt -- APIC error on CPU0: 40(40) https://launchpad.net/malone/bugs/37576 From javiermon at gmail.com Sat Apr 1 11:19:20 2006 From: javiermon at gmail.com (kmon) Date: Sat, 01 Apr 2006 11:19:20 -0000 Subject: [Bug 37576] Re: APIC error on CPU0: 40(40) References: <20060401111547.5441.66321.malonedeb@gangotri.ubuntu.com> Message-ID: <20060401111920.5441.79287.malone@gangotri.ubuntu.com> Using dapper up to date. Amd64 arch. -- APIC error on CPU0: 40(40) https://launchpad.net/malone/bugs/37576 From javiermon at gmail.com Sat Apr 1 11:14:06 2006 From: javiermon at gmail.com (kmon) Date: Sat, 01 Apr 2006 11:14:06 -0000 Subject: [Bug 37575] bcm43 errors & no wifi References: <20060401111406.23707.88085.malonedeb@gandwana.ubuntu.com> Message-ID: <20060401111406.23707.88085.malonedeb@gandwana.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: Hi I have an acer ferrari 4005. This laptop has a broadcom wifi card as reported by lspci: 0000:06:02.0 Network controller: Broadcom Corporation BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller (rev 02) I get this error on dmesg: 01/04/06 13:12:13 turion kernel [ 889.343183] bcm43xx: FATAL ERROR: BCM43xx_IRQ_XMIT_ERROR and I can't connect to my wifi router under linux with knetworkmanager, probably because of this kind of errors. Thanxs -- bcm43 errors & no wifi https://launchpad.net/malone/bugs/37575 From javiermon at gmail.com Sat Apr 1 11:19:03 2006 From: javiermon at gmail.com (kmon) Date: Sat, 01 Apr 2006 11:19:03 -0000 Subject: [Bug 37575] Re: bcm43 errors & no wifi References: <20060401111406.23707.88085.malonedeb@gandwana.ubuntu.com> Message-ID: <20060401111903.5415.40082.malone@gangotri.ubuntu.com> ... forgot again to say i'm using amd64 arch -- bcm43 errors & no wifi https://launchpad.net/malone/bugs/37575 From javiermon at gmail.com Sat Apr 1 11:18:38 2006 From: javiermon at gmail.com (kmon) Date: Sat, 01 Apr 2006 11:18:38 -0000 Subject: [Bug 37575] Re: bcm43 errors & no wifi References: <20060401111406.23707.88085.malonedeb@gandwana.ubuntu.com> Message-ID: <20060401111838.5441.90735.malone@gangotri.ubuntu.com> I forgot to say I'm using dapper up to date & the new bcm4x kernel driver (no ndiswrapper) -- bcm43 errors & no wifi https://launchpad.net/malone/bugs/37575 From grzegon at poczta.onet.pl Sat Apr 1 11:31:48 2006 From: grzegon at poczta.onet.pl (Grzegorz "McCartney" Oledzki) Date: Sat, 01 Apr 2006 11:31:48 -0000 Subject: [Bug 37576] Re: APIC error on CPU0: 40(40) References: <20060401111547.5441.66321.malonedeb@gangotri.ubuntu.com> Message-ID: <20060401113148.23707.65210.malone@gandwana.ubuntu.com> I have Acer Aspire 5024WLMi and have had the same problem. Try adding "noapic" to kernel boot options (in LILO/GRUB). ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Unconfirmed => Confirmed -- APIC error on CPU0: 40(40) https://launchpad.net/malone/bugs/37576 From cjwatson at canonical.com Sat Apr 1 11:55:13 2006 From: cjwatson at canonical.com (Colin Watson) Date: Sat, 01 Apr 2006 11:55:13 -0000 Subject: [Bug 20985] Re: Installing Yaboot hangs at 50% during install References: <20060113141014.21012.77400.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060401115513.5441.62673.malone@gangotri.ubuntu.com> *** This bug is a duplicate of bug 20967 *** I think this is very likely a duplicate of bug 20967. If you didn't have a Mac OS partition, then it isn't; please let me know in that case. ** This bug has been marked a duplicate of bug 20967 os-prober hangs -- Installing Yaboot hangs at 50% during install https://launchpad.net/malone/bugs/20985 From cjwatson at canonical.com Sat Apr 1 11:55:20 2006 From: cjwatson at canonical.com (Colin Watson) Date: Sat, 01 Apr 2006 11:55:20 -0000 Subject: [Bug 20967] Re: os-prober hangs References: <20060113141009.21012.44842.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060401115520.5441.45778.launchpad@gangotri.ubuntu.com> ** Bug 20985 has been marked a duplicate of this bug -- os-prober hangs https://launchpad.net/malone/bugs/20967 From andrew+ubuntu at jorgensenfamily.us Sat Apr 1 13:10:47 2006 From: andrew+ubuntu at jorgensenfamily.us (Andrew Jorgensen) Date: Sat, 01 Apr 2006 13:10:47 -0000 Subject: [Bug 37120] wpasupplicant doesn't work properly with rt2500 driver References: <20060329054652.7313.48354.malonedeb@gangotri.ubuntu.com> Message-ID: <20060401131047.5441.38700.launchpad@canonical@gangotri.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Confirmed Description: Using version 0.4.8-0ubuntu2 on dapper with network-manager 0.6.1 (from main). I cannot connect to any wireless networks (unencrypted even) because wpasupplicant claims that it cannot associate with the AP. This claim is false because it does, in fact, associate with the AP. Here is an example of the log output: Starting AP scan (broadcast SSID) Scan timeout - try to get results of scan results (2 BSSes) Scan results: 2 Selecting BSS from priority group 0 0: 00:13:10:35:e4:23 ssid='Jorgensen' wpa_ie_len=0 rsn_ie_len=0 caps=0x1 skip - no WPA/RSN IE 1: 00:14:bf:03:0c:a5 ssid='' wpa_ie_len=0 rsn_ie_len=0 caps=0x1 skip - no WPA/RSN IE selected non-WPA AP 00:13:10:35:e4:23 ssid='Jorgensen' Trying to associate with 00:13:10:35:e4:23 (SSID='Jorgensen' freq=0 MHz) CTRL_IFACE monitor send - hexdump(len=42): 2f 76 61 72 2f 72 75 6e 2f 4e 65 74 77 6f 72 6b 4d 61 6e 61 67 65 72 2f 77 70 61 5f 63 74 72 6c 5f 33 39 37 39 2d 31 00 00 00 Cancelling scan request WPA: clearing own WPA/RSN IE Automatic auth_alg selection: 0x1 WPA: clearing AP WPA IE WPA: clearing AP RSN IE WPA: clearing own WPA/RSN IE No keys have been configured - skip key clearing wpa_driver_wext_set_drop_unencrypted State: SCANNING -> ASSOCIATING wpa_driver_wext_associate Association request to the driver failed Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Confirmed Description: Using version 0.4.8-0ubuntu2 on dapper with network-manager 0.6.1 (from main). I cannot connect to any wireless networks (unencrypted even) because wpasupplicant claims that it cannot associate with the AP. This claim is false because it does, in fact, associate with the AP. Here is an example of the log output: Starting AP scan (broadcast SSID) Scan timeout - try to get results of scan results (2 BSSes) Scan results: 2 Selecting BSS from priority group 0 0: 00:13:10:35:e4:23 ssid='Jorgensen' wpa_ie_len=0 rsn_ie_len=0 caps=0x1 skip - no WPA/RSN IE 1: 00:14:bf:03:0c:a5 ssid='' wpa_ie_len=0 rsn_ie_len=0 caps=0x1 skip - no WPA/RSN IE selected non-WPA AP 00:13:10:35:e4:23 ssid='Jorgensen' Trying to associate with 00:13:10:35:e4:23 (SSID='Jorgensen' freq=0 MHz) CTRL_IFACE monitor send - hexdump(len=42): 2f 76 61 72 2f 72 75 6e 2f 4e 65 74 77 6f 72 6b 4d 61 6e 61 67 65 72 2f 77 70 61 5f 63 74 72 6c 5f 33 39 37 39 2d 31 00 00 00 Cancelling scan request WPA: clearing own WPA/RSN IE Automatic auth_alg selection: 0x1 WPA: clearing AP WPA IE WPA: clearing AP RSN IE WPA: clearing own WPA/RSN IE No keys have been configured - skip key clearing wpa_driver_wext_set_drop_unencrypted State: SCANNING -> ASSOCIATING wpa_driver_wext_associate Association request to the driver failed -- wpasupplicant doesn't work properly with rt2500 driver https://launchpad.net/malone/bugs/37120 From re2824 at safe-mail.net Sat Apr 1 13:14:27 2006 From: re2824 at safe-mail.net (Jaime) Date: Sat, 01 Apr 2006 13:14:27 -0000 Subject: [Bug 37590] "device" field of uevents still says "/proc/bus/usb" (should say "/dev/bus/usb") References: <20060401131427.5441.7299.malonedeb@gangotri.ubuntu.com> Message-ID: <20060401131427.5441.7299.malonedeb@gangotri.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: If I run "udevmonitor --env" and plug something into one of my usb ports, any uevents that contain the "device" field say something like: DEVICE=/proc/bus/usb/001/002 But the /proc/bus/usb tree is no longer populated: root at t21jt:/# ls -al /proc/bus/usb/001/002 ls: /proc/bus/usb/001/002: No such file or directory Instead, these devices are now located under /dev/bus/usb: root at t21jt:/# ls -al /dev/bus/usb/001/002 crw-rw-r-- 1 root root 189, 1 2006-04-01 14:50 /dev/bus/usb/001/002 BTW, please excuse the error if this is actually a problem with udevmonitor - I assumed that it's a kernel problem because the error occurs in both uevent AND udev entries (i.e. both before AND after udev processing has occurred). Hope this helps. -- "device" field of uevents still says "/proc/bus/usb" (should say "/dev/bus/usb") https://launchpad.net/malone/bugs/37590 From siretart at tauware.de Sat Apr 1 13:10:46 2006 From: siretart at tauware.de (Reinhard Tartler) Date: Sat, 01 Apr 2006 13:10:46 -0000 Subject: [Bug 37120] Re: wpasupplicant doesn't work properly with rt2500 driver References: <20060329054652.7313.48354.malonedeb@gangotri.ubuntu.com> Message-ID: <20060401131047.5441.21028.malone@gangotri.ubuntu.com> reassigning to the correct package. If the driver doesn't support WPA properly, there is nothing that we can do about that in wpasupplicant ** Changed in: wpasupplicant (Ubuntu) Sourcepackagename: wpasupplicant => linux-source-2.6.15 -- wpasupplicant doesn't work properly with rt2500 driver https://launchpad.net/malone/bugs/37120 From javiermon at gmail.com Sat Apr 1 13:37:29 2006 From: javiermon at gmail.com (kmon) Date: Sat, 01 Apr 2006 13:37:29 -0000 Subject: [Bug 37576] Re: APIC error on CPU0: 40(40) References: <20060401111547.5441.66321.malonedeb@gangotri.ubuntu.com> Message-ID: <20060401133729.23707.15186.malone@gandwana.ubuntu.com> Hi I've tried some kernel parameters: noapic nolapic : This made my boot process MUCH longer and with various errors, like bluetooth not starting, etc. noapic : Same as above nolapic: Everything stayed the same (i.e. I still got the acpi error.) Thanxs. -- APIC error on CPU0: 40(40) https://launchpad.net/malone/bugs/37576 From vincent.trouilliez at modulonet.fr Sat Apr 1 14:35:50 2006 From: vincent.trouilliez at modulonet.fr (Trouilliez vincent) Date: Sat, 01 Apr 2006 14:35:50 -0000 Subject: [Bug 27454] Re: Hibernation problem with SCSI controller References: <20060113145435.21012.82266.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060401143550.5441.36113.malone@gangotri.ubuntu.com> Hi, I have since changed SCSI card (in an attempt to rule out the H/W). So I am now using an Adaptec AVA-2904 (simpler card than the AHA 2940, it doesn't have a BIOS). The chip on the board is stamped as "Adaptec AIC-7856T". The symptoms are still 100% the same with either card: /dev/sg0 does exist upon resume from suspend to disk, but xsane hangs when trying to detect the available devices. lspci reports: 0000:01:02.0 SCSI storage controller: Adaptec AHA-7850 (rev 03) lspci -n report: 0000:01:02.0 0100: 9004:5078 (rev 03) It doesn't quite match the actual chip on the card: 7850 not 7856T, might be a problem ? ** Attachment added: "lspci and lspci -n" http://librarian.launchpad.net/1904283/lspci%20%26%20lspci%20-n -- Hibernation problem with SCSI controller https://launchpad.net/malone/bugs/27454 From zulcss at gmail.com Sat Apr 1 16:09:47 2006 From: zulcss at gmail.com (zul) Date: Sat, 01 Apr 2006 16:09:47 -0000 Subject: [Bug 36955] Re: /dev/net/tun has no user permissions References: <20060328052518.20514.82849.malonedeb@gangotri.ubuntu.com> Message-ID: <20060401160947.5415.49321.malone@gangotri.ubuntu.com> I think this more of a udev issue ** Changed in: linux-source-2.6.15 (Ubuntu) Sourcepackagename: linux-source-2.6.15 => udev -- /dev/net/tun has no user permissions https://launchpad.net/malone/bugs/36955 From imsoblue at bluewin.ch Sat Apr 1 16:11:36 2006 From: imsoblue at bluewin.ch (Jonathan Blue) Date: Sat, 01 Apr 2006 16:11:36 -0000 Subject: [Bug 35044] Re: speedstep-smi doesn't load anymore on thinkpad t20 References: <20060315125056.30057.65261.malonedeb@gandwana.ubuntu.com> Message-ID: <20060401161136.23733.67192.malone@gandwana.ubuntu.com> Same here, using a Thinkpad T22 with a Pentium III Mobile @ 900 Mhz. It used to work in Breezy. processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 8 model name : Pentium III (Coppermine) stepping : 10 cpu MHz : 697.080 cache size : 256 KB fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 2 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov pat pse36 mmx fxsr sse bogomips : 1394.89 -- speedstep-smi doesn't load anymore on thinkpad t20 https://launchpad.net/malone/bugs/35044 From zulcss at gmail.com Sat Apr 1 16:49:32 2006 From: zulcss at gmail.com (zul) Date: Sat, 01 Apr 2006 16:49:32 -0000 Subject: [Bug 35215] Re: ipw3945 driver required for functionality on new Intel PRO/Wireless 3945ABG Mini-PCI Express Adapters References: <20060316173707.11105.89035.malonedeb@gandwana.ubuntu.com> Message-ID: <20060401164932.5441.82323.malone@gangotri.ubuntu.com> I have a patch for this, needs to be compiled tested. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Confirmed => In Progress -- ipw3945 driver required for functionality on new Intel PRO/Wireless 3945ABG Mini-PCI Express Adapters https://launchpad.net/malone/bugs/35215 From andrew+ubuntu at jorgensenfamily.us Sat Apr 1 17:10:21 2006 From: andrew+ubuntu at jorgensenfamily.us (Andrew Jorgensen) Date: Sat, 01 Apr 2006 17:10:21 -0000 Subject: [Bug 37120] Re: wpasupplicant doesn't work properly with rt2500 driver References: <20060329054652.7313.48354.malonedeb@gangotri.ubuntu.com> Message-ID: <20060401171021.5441.26930.malone@gangotri.ubuntu.com> It's not that it doesn't support WPA, it's that it doesn't support the wireless extensions used by wpasupplicant's wext driver. A wpasupplicant driver could be written to support the ioctls that rt2500 does use. Another possibility is that wpasupplicant could be fixed to recognize what level of extensions are supported and fall back to only controlling the ssid. Or better yet, network-manager could recognize the problem and fall back to controlling the device directly. In some reasonable way I'd love to see this fixed. I used to be able to use network-manager and now I can't (there's a bug elsewhere about network-manager not actually working without wpasupplicant like it claims it can). In a later release, possibly dapper+1, we should be able to replace the rt2500 driver with the rt2x00 driver which does support the latest extensions. I can't test that driver right now because it requires kernel 2.6.16. -- wpasupplicant doesn't work properly with rt2500 driver https://launchpad.net/malone/bugs/37120 From zulcss at gmail.com Sat Apr 1 17:13:41 2006 From: zulcss at gmail.com (zul) Date: Sat, 01 Apr 2006 17:13:41 -0000 Subject: [Bug 18347] Re: Compaq 1850R crash during install and while running References: <20060113135555.21012.28144.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060401171341.23707.73752.malone@gandwana.ubuntu.com> No response from user. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Needs Info => Rejected -- Compaq 1850R crash during install and while running https://launchpad.net/malone/bugs/18347 From zulcss at gmail.com Sat Apr 1 17:17:18 2006 From: zulcss at gmail.com (zul) Date: Sat, 01 Apr 2006 17:17:18 -0000 Subject: [Bug 20723] Re: Sound looping on VIA chipset without "noapic" References: <20060113140850.21012.875.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060401171718.5441.89557.malone@gangotri.ubuntu.com> No response assuming fixed. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Needs Info => Fix Committed -- Sound looping on VIA chipset without "noapic" https://launchpad.net/malone/bugs/20723 From zulcss at gmail.com Sat Apr 1 17:21:51 2006 From: zulcss at gmail.com (zul) Date: Sat, 01 Apr 2006 17:21:51 -0000 Subject: [Bug 18740] Re: linux-image-2.6.12-3-k7: Mustek Scanner MFS-06000CX not working anymore References: <20060113135756.21012.58879.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060401172152.5441.52314.malone@gangotri.ubuntu.com> No response from user, assuming fixed. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Needs Info => Fix Released -- linux-image-2.6.12-3-k7: Mustek Scanner MFS-06000CX not working anymore https://launchpad.net/malone/bugs/18740 From zulcss at gmail.com Sat Apr 1 17:30:43 2006 From: zulcss at gmail.com (zul) Date: Sat, 01 Apr 2006 17:30:43 -0000 Subject: [Bug 19300] Re: [psmouse] ps/2 mouse misdetected, badly mapped References: <20060113140054.21012.76451.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060401173043.5415.82588.malone@gangotri.ubuntu.com> Assumed fixed no response from user ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Needs Info => Fix Released -- [psmouse] ps/2 mouse misdetected, badly mapped https://launchpad.net/malone/bugs/19300 From zulcss at gmail.com Sat Apr 1 17:48:28 2006 From: zulcss at gmail.com (zul) Date: Sat, 01 Apr 2006 17:48:28 -0000 Subject: [Bug 20332] Re: Plextor PX-71SA doesn't work with kernel version 2.6.12 References: <20060113140647.21012.75610.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060401174828.23733.20000.malone@gandwana.ubuntu.com> This should work with the ubuntu kernel now. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Needs Info => Fix Committed -- Plextor PX-71SA doesn't work with kernel version 2.6.12 https://launchpad.net/malone/bugs/20332 From zulcss at gmail.com Sat Apr 1 17:55:26 2006 From: zulcss at gmail.com (zul) Date: Sat, 01 Apr 2006 17:55:26 -0000 Subject: [Bug 21292] Re: CardBus not functional, no IRQ, ENE CB1410 CardBus References: <20060113141202.21012.23126.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060401175527.5415.11705.malone@gangotri.ubuntu.com> This should be fixed in dapper. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Needs Info => Fix Released -- CardBus not functional, no IRQ, ENE CB1410 CardBus https://launchpad.net/malone/bugs/21292 From zulcss at gmail.com Sat Apr 1 17:56:46 2006 From: zulcss at gmail.com (zul) Date: Sat, 01 Apr 2006 17:56:46 -0000 Subject: [Bug 20686] Re: usb devices not detected References: <20060113140838.21012.42368.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060401175646.5415.98410.malone@gangotri.ubuntu.com> No response from user, closing. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Needs Info => Rejected -- usb devices not detected https://launchpad.net/malone/bugs/20686 From zulcss at gmail.com Sat Apr 1 18:11:10 2006 From: zulcss at gmail.com (zul) Date: Sat, 01 Apr 2006 18:11:10 -0000 Subject: [Bug 23675] Re: breezy server automatic network card detecting References: <20060113142502.21012.37399.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060401181111.23707.60343.malone@gandwana.ubuntu.com> No response form user. closing ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Needs Info => Rejected -- breezy server automatic network card detecting https://launchpad.net/malone/bugs/23675 From zulcss at gmail.com Sat Apr 1 18:19:45 2006 From: zulcss at gmail.com (zul) Date: Sat, 01 Apr 2006 18:19:45 -0000 Subject: [Bug 27413] Re: it8212 ide controller support not available in Breezy References: <20060113145424.21012.29488.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060401181945.5415.41980.malone@gangotri.ubuntu.com> There is support in 2.6.15 (dapper), Please upgrade I doubt it will be backported to breezy. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Unconfirmed => Fix Released -- it8212 ide controller support not available in Breezy https://launchpad.net/malone/bugs/27413 From zulcss at gmail.com Sat Apr 1 18:18:18 2006 From: zulcss at gmail.com (zul) Date: Sat, 01 Apr 2006 18:18:18 -0000 Subject: [Bug 27382] Re: xircom_tulip_cb not included References: <20060113145414.21012.31752.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060401181818.23733.60513.malone@gandwana.ubuntu.com> This has been resolved. :/lib/modules/2.6.15-18-386 $ find . -name "xircom*" -print ./kernel/drivers/net/tulip/xircom_tulip_cb.ko ./kernel/drivers/net/tulip/xircom_cb.ko ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Fix Committed => Fix Released -- xircom_tulip_cb not included https://launchpad.net/malone/bugs/27382 From zulcss at gmail.com Sat Apr 1 18:17:21 2006 From: zulcss at gmail.com (zul) Date: Sat, 01 Apr 2006 18:17:21 -0000 Subject: [Bug 27382] Re: xircom_tulip_cb not included References: <20060113145414.21012.31752.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060401181721.23707.73127.malone@gandwana.ubuntu.com> This has been resolved. :/lib/modules/2.6.15-18-386 $ find . -name "xircom*" -print ./kernel/drivers/net/tulip/xircom_tulip_cb.ko ./kernel/drivers/net/tulip/xircom_cb.ko ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Unconfirmed => Fix Committed -- xircom_tulip_cb not included https://launchpad.net/malone/bugs/27382 From samtygier at yahoo.co.uk Sat Apr 1 18:22:47 2006 From: samtygier at yahoo.co.uk (sam tygier) Date: Sat, 01 Apr 2006 18:22:47 -0000 Subject: [Bug 37120] Re: wpasupplicant doesn't work properly with rt2500 driver References: <20060329054652.7313.48354.malonedeb@gangotri.ubuntu.com> Message-ID: <20060401182247.5415.42950.malone@gangotri.ubuntu.com> i am pretty sure that network manager 0.5 did not use wpasupplicant. -- wpasupplicant doesn't work properly with rt2500 driver https://launchpad.net/malone/bugs/37120 From samtygier at yahoo.co.uk Sat Apr 1 19:35:35 2006 From: samtygier at yahoo.co.uk (sam tygier) Date: Sat, 01 Apr 2006 19:35:35 -0000 Subject: [Bug 30963] Re: [dapper] snd_powermac does not recognize sound card References: <20060209122327.25235.98036.malonedeb@gangotri.ubuntu.com> Message-ID: <20060401193535.23733.97642.malone@gandwana.ubuntu.com> could this be an installer bug? i did a reinstall from flight5 and dist-upgrade. sound works fine. -- [dapper] snd_powermac does not recognize sound card https://launchpad.net/malone/bugs/30963 From edal at freestart.hu Sat Apr 1 20:24:45 2006 From: edal at freestart.hu (edal) Date: Sat, 01 Apr 2006 20:24:45 -0000 Subject: [Bug 2962] Update on Bug (Dapper Tests) References: <20051008140639.14682.11809.malonedeb@gangotri.ubuntu.com> Message-ID: <3233704.1143923085875.JavaMail.www-data@www2> OK, I downloaded Dapper Flight 6 then applied all the updates so that I was working with the latest software. Here's what happens. On power up the power status display indicates that there is zero battery charge (single red line) and that the laptop is running on mains power. What does work (this is new) is that the display dims when the mains cord is removed then comes back to full brightness when it is replaced. Throughout this the battery charge and power indicators do not change. Running the mouse pointer over the battery icon gives a popup message telling me that no battery is present and the laptop is running on mains power. I then removed the battery pack (with mains power applied) and then reinserted it. After a few seconds the battery charge indicator now shows the charge state. I also get an indication of power source, battery or mains. When I remove the power cord the display dims and I get a message in the top-left corner telling me that the laptop is now on battery power. All indicators and icons then work correctly until the laptop is shut down. This would seem to indicate an initilization failure in the battery detection when the laptop first starts up, everything else works. Ed Almos ____________________________________________________________________ Miert fizetsz az internetert? Korlatlan, ingyenes internet hozzaferes a FreeStarttol Probald ki most! http://www.freestart.hu -- Register of Power Status Change Requires Removal & Reinsertion of Battery https://launchpad.net/malone/bugs/2962 From tfheen at canonical.com Sat Apr 1 21:28:31 2006 From: tfheen at canonical.com (Tollef Fog Heen) Date: Sat, 01 Apr 2006 21:28:31 -0000 Subject: [Bug 30848] Re: Korean/latin key(Hangul key) doesn't work. References: <20060208164242.11100.37112.malonedeb@gandwana.ubuntu.com> Message-ID: <20060401212831.5415.21909.malone@gangotri.ubuntu.com> The X and debian-installer part of this bug should be fixed now. -- Korean/latin key(Hangul key) doesn't work. https://launchpad.net/malone/bugs/30848 From mail at scheuler.de Sat Apr 1 21:35:28 2006 From: mail at scheuler.de (bugfriend) Date: Sat, 01 Apr 2006 21:35:28 -0000 Subject: [Bug 33368] Re: X freeze the computer (Dapper - glcore) References: <20060302082234.17525.50004.malonedeb@gangotri.ubuntu.com> Message-ID: <20060401213528.23707.73505.malone@gandwana.ubuntu.com> I found out, that this could be a timing thing. After booting recovery mode, i started kdm, no problem. So i got the idea to insert a little sleep to the /etc/init.d/kdm script.............and it worked. After inserting a "sleep 3" to the script, i got no more hangups when booting my T21. -- X freeze the computer (Dapper - glcore) https://launchpad.net/malone/bugs/33368 From mdz at ubuntu.com Sat Apr 1 22:39:38 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Sat, 01 Apr 2006 22:39:38 -0000 Subject: [Bug 32599] Re: kernel's PHP^Wpnp subsystem is broken References: <20060223124419.14968.52544.malonedeb@gangotri.ubuntu.com> Message-ID: <20060401223938.23733.31865.malone@gandwana.ubuntu.com> Is this related? [4294671.598000] pnp: PnP ACPI init [4294671.598000] pnp: PnPACPI: unknown resource type 7 [4294671.598000] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0c01 [4294671.598000] pnp: PnPACPI: unknown resource type 7 [4294671.598000] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0c02 [4294671.598000] pnp: PnPACPI: unknown resource type 7 [4294671.598000] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0200 [4294671.598000] pnp: PnPACPI: unknown resource type 7 [4294671.598000] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0b00 [4294671.598000] pnp: PnPACPI: unknown resource type 7 [4294671.598000] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0800 [4294671.598000] pnp: PnPACPI: unknown resource type 7 [4294671.598000] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0c04 [4294671.598000] pnp: PnPACPI: unknown resource type 7 [4294671.598000] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0700 [4294671.599000] pnp: PnPACPI: unknown resource type 7 [4294671.599000] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0501 [4294671.600000] pnp: PnPACPI: unknown resource type 7 [4294671.600000] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0401 [4294671.600000] pnp: PnPACPI: unknown resource type 7 [4294671.600000] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0303 [4294671.600000] pnp: PnP ACPI: found 0 devices [4294671.600000] PnPBIOS: Disabled by ACPI PNP -- kernel's PHP^Wpnp subsystem is broken https://launchpad.net/malone/bugs/32599 From cybaix at gmail.com Sat Apr 1 22:48:12 2006 From: cybaix at gmail.com (Mark Dehus) Date: Sat, 01 Apr 2006 22:48:12 -0000 Subject: [Bug 37648] Kernel <= 2.6.15-19 + Tecra A4 /w ACPI = No network/pci.. References: <20060401224812.23733.23703.malonedeb@gandwana.ubuntu.com> Message-ID: <20060401224812.23733.23703.malonedeb@gandwana.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 kernel-image-2.6.15-19-386-di (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: If I boot the laptop by default I have no network connectivity. The cards (wireless & wired) are recognized but they fail to obtain DHCP or communicate with the network (if a static address is assigned). If I pass the pci=noacpi option to the kernel the network/pci works till I try to query something (IE cat /proc/acpi/etc/etc), after that the network/pci no longer works till the computer is rebooted. If I pass the acpi=off option to the kernel everything works fine. I have tried both the 1.60 and 1.70 versions of the BIOS. I started off with Kernel 2.6.12-9 from Breezy, then upgraded to Dapper with Kernel 2.6.15-19 to try and resolve the issue but that did not fix it. Having no ACPI sucks (Can't speedstep, computer won't shutdown by itself, etc). :( -- Kernel <= 2.6.15-19 + Tecra A4 /w ACPI = No network/pci.. https://launchpad.net/malone/bugs/37648 From cybaix at gmail.com Sat Apr 1 23:11:12 2006 From: cybaix at gmail.com (Mark Dehus) Date: Sat, 01 Apr 2006 23:11:12 -0000 Subject: [Bug 37648] Re: Kernel <= 2.6.15-19 + Tecra A4 /w ACPI = No network/pci.. References: <20060401224812.23733.23703.malonedeb@gandwana.ubuntu.com> Message-ID: <20060401231112.23733.39360.malone@gandwana.ubuntu.com> My dmseg and lspci output can be found at.. http://csel.cs.colorado.edu/~dehus/dmesg http://csel.cs.colorado.edu/~dehus/lspci -- Kernel <= 2.6.15-19 + Tecra A4 /w ACPI = No network/pci.. https://launchpad.net/malone/bugs/37648 From tskisner.public at gmail.com Sat Apr 1 23:37:43 2006 From: tskisner.public at gmail.com (TedKisner) Date: Sat, 01 Apr 2006 23:37:43 -0000 Subject: [Bug 35170] Re: ACPI brightness, volume (everything) won't work in Dapper (Panasonic CF-Y4) References: <20060316081106.6510.58992.malonedeb@gangotri.ubuntu.com> Message-ID: <20060401233743.23707.76064.malone@gandwana.ubuntu.com> This is a duplicate of bug #33855. An old version of kernel driver pcc_acpi causes a kernel oops when it receives keystrokes from the various keys (brightness, volume, etc). The fix (newer driver) has been committed by Ben, so I suggest we close this bug... Note that the acpi-support package does not currently include scripts to handle volume changes, but that belongs in a separate bug-report (will open soon with patch). -- ACPI brightness, volume (everything) won't work in Dapper (Panasonic CF-Y4) https://launchpad.net/malone/bugs/35170 From rafa at dedaloingenieros.com Sun Apr 2 00:16:20 2006 From: rafa at dedaloingenieros.com (Rafael Jesus Alcantara Perez) Date: Sun, 02 Apr 2006 00:16:20 -0000 Subject: [Bug 37659] The IPAQ module does not support WinCE Smart-phones References: <20060402001620.23733.73589.malonedeb@gandwana.ubuntu.com> Message-ID: <20060402001620.23733.73589.malonedeb@gandwana.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: I've tested the latest kernel image (2.6.15-19.29) and I've found that the 'ipaq' module does not support WinCE smart-phones as, in an Ubuntu forum is exposed [1]. In that page is also shown a link to the patch [2] that fixes that module. [1] http://www.ubuntuforums.org/archive/index.php/t-86302.html [2] http://synce.sourceforge.net/tmp/kernel-2.6-driver.tar.gz -- The IPAQ module does not support WinCE Smart-phones https://launchpad.net/malone/bugs/37659 From ihatepickles at gmail.com Sun Apr 2 01:11:22 2006 From: ihatepickles at gmail.com (Steve Smith) Date: Sun, 02 Apr 2006 01:11:22 -0000 Subject: [Bug 37287] Re: No sound on Inspiron 9400 with Dapper References: <20060330074302.7863.60106.malonedeb@gangotri.ubuntu.com> Message-ID: <20060402011122.5415.83863.malone@gangotri.ubuntu.com> I'm also experiencing this on my Dell e1505 (aka Inspiron 6400) as well. When I first installed Flight 5 sound was functional and after full patching sound was dead. The gist I've been able to glean from Ubuntu Forums is that this is a known issue among the developers and will be corrected on the next kernel update. Acer and Travelmate laptops seem to have the same chipset and are also experiencing the issue. lspci: 0000:00:1b.0 0403: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 01) -- No sound on Inspiron 9400 with Dapper https://launchpad.net/malone/bugs/37287 From mas at mylug.org Sun Apr 2 04:53:53 2006 From: mas at mylug.org (mas) Date: Sun, 02 Apr 2006 04:53:53 -0000 Subject: [Bug 6550] Re: Grub wont uncompress kernel image References: <20060108150918.15433.4157.malonedeb@gangotri.ubuntu.com> Message-ID: <20060402045353.23707.25248.malone@gandwana.ubuntu.com> *** This bug is a duplicate of bug 33939 *** Tried flight-6 on my machine. The non-booting issue still persists. Would it cause major problems if EDD support is not enabled? I have been running without that being enabled and so far have not seen any problems. -- Grub wont uncompress kernel image https://launchpad.net/malone/bugs/6550 From matt.kuiken at verizon.net Sun Apr 2 05:06:39 2006 From: matt.kuiken at verizon.net (mtkuiken) Date: Sun, 02 Apr 2006 05:06:39 -0000 Subject: [Bug 30014] Re: Sound is muted by default on Vaio FS115 with HDA/RealTek References: <20060129215006.9306.97651.malonedeb@gandwana.ubuntu.com> Message-ID: <20060402050639.5415.59652.malone@gangotri.ubuntu.com> On installing Dapper Flight 6, in order to get sound from my PC speakers on a Sony Vaio TX650P, I must open gnome-volume-manager, enter 'File'->'Change Device'->'Realtek ALC260 (OSS Mixer)' and increase the Volume slider which is set at minimum. Prior to this, no sound can be heard. Also, the volume applet defaults to Headphone, but the pc speaker volume is controlled by PCM. This issue is much less important than setting the volume correctly, IMO. The device is the HDA/RealTek. -- Sound is muted by default on Vaio FS115 with HDA/RealTek https://launchpad.net/malone/bugs/30014 From ribs at riblet.plus.com Sun Apr 2 08:28:11 2006 From: ribs at riblet.plus.com (Richard Brooklyn) Date: Sun, 02 Apr 2006 08:28:11 -0000 Subject: [Bug 37695] Kernel 2.6.15-19-amd64-k8 fails to boot References: <20060402082811.5415.84396.malonedeb@gangotri.ubuntu.com> Message-ID: <20060402082811.5415.84396.malonedeb@gangotri.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 linux-image-2.6.15-19-amd64-k8 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: Last night I decided to upgrade my Breezy install to a Dapper install by changing the /etc/apt/sources.lst file and running apt-get dist-upgrade. Amongst other things, this process installed a new kernel for me. I am using the k8 kernel as it works better with my amd64 CPU. So I decide to reboot to get this new kernel in affect. This is where my problems started. I've not had issues with the Breezy k8 kernel, but the Dapper kernel is currently unusable. When attempting to boot, I get massive screen corruption (it actually shows the BIOS screen again, which has cleared by time grub loads), and nothing else. When attempting to boot into recovery mode, I get beyond the screen corruption, but the kernel cannot find my hard drive. It waits for a couple of minutes whilst it tries to find it, then gives up and drops me into a limited shell. I am unable to find out why this is happening. The breezy kernel does still boot, but I loose my nVidia graphical driver (expected), and networking (not expected). Oddly, I also lost my USB keyboard as well until I turned on a compatability option in my BIOS. I was forced to boot into the AMD64 LiveCD in order to access my Ubuntu enviroment via chrooting into it. After posting this bug, I will attach camera shots so this can be verified. I will also try the generic kernel, to see if that helps. ** Attachment added: "Graphical corruption when trying to boot normally" http://librarian.launchpad.net/1914504/PICT0006.JPG ** Attachment added: "Recovery mode picture" http://librarian.launchpad.net/1914508/PICT0010.JPG -- Kernel 2.6.15-19-amd64-k8 fails to boot https://launchpad.net/malone/bugs/37695 From jason at subterrific.net Sun Apr 2 08:44:30 2006 From: jason at subterrific.net (Jason Toffaletti) Date: Sun, 02 Apr 2006 08:44:30 -0000 Subject: [Bug 33116] Re: powernow-k8 refuses to load References: <20060228031323.27016.20737.malonedeb@gangotri.ubuntu.com> Message-ID: <20060402084430.23733.29790.malone@gandwana.ubuntu.com> still having this issue with: 2.6.15-19-k7 [4294959.425000] powernow-k8: Found 1 AMD Athlon 64 / Opteron processors (version 1.50.4) [4294959.425000] powernow-k8: MP systems not supported by PSB BIOS structure -- powernow-k8 refuses to load https://launchpad.net/malone/bugs/33116 From ribs at riblet.plus.com Sun Apr 2 08:45:17 2006 From: ribs at riblet.plus.com (Richard Brooklyn) Date: Sun, 02 Apr 2006 08:45:17 -0000 Subject: [Bug 37695] Re: Kernel 2.6.15-19-amd64-k8 fails to boot References: <20060402082811.5415.84396.malonedeb@gangotri.ubuntu.com> Message-ID: <20060402084517.5441.208.malone@gangotri.ubuntu.com> I've booted into the generic version of this kernel without issues. So obviously something has gone wrong in the transition to the k8 kernel. -- Kernel 2.6.15-19-amd64-k8 fails to boot https://launchpad.net/malone/bugs/37695 From timo.jyrinki at iki.fi Sun Apr 2 09:24:14 2006 From: timo.jyrinki at iki.fi (Timo Jyrinki) Date: Sun, 02 Apr 2006 09:24:14 -0000 Subject: [Bug 29789] Re: tv card audio not working References: <20060126170552.26274.32755.malonedeb@gangotri.ubuntu.com> Message-ID: <20060402092414.5415.54764.malone@gangotri.ubuntu.com> My bt878 card did work without problems in Ubuntu 5.10 when recording from the TV-card's line-out, so it'd seem like a regression. It's a weird combination of loading order and "modules handling the same thing" stuff. blacklisting bt878 allows snd_bt87x to function properly (without blacklisting snd_bt87x is loaded but nothing seems to be initialized). A complexicating thing is also the amount of methods that may be used for recording. Recording from line-out shouldn't require snd_bt87x at all, snd_bt87x is for directly recording from the tv card either the analog way or digital way (both provided by snd_bt87x, and supported only by some cards). In 5.10, I didn't even try the direct recording, but now some of this new ALSA/DVB (?) stuff is breaking even the sound output from line-out to line-in depending on the modules loaded. And if that's not enough, I have recording problems even using Gnome's sound recorder with my HDAudio sound, but at least the sound should be heard when the TV card is connected to line in. Also, there isn't even a good documentation available about what _is_ the relationship between bttv, bt878, btaudio (gone?), snd-bt87x... modules. I don't even have a digital TV card but still apparently some DVB stuff is also included in some of those modules? And some forum messages are indicating that that "dvb stuff" is also trying to "handle" the audio part. I hope there is at least someone that actually understands the whole picture. -- tv card audio not working https://launchpad.net/malone/bugs/29789 From idan at fastmail.fm Sun Apr 2 09:29:04 2006 From: idan at fastmail.fm (Idan Gazit) Date: Sun, 02 Apr 2006 09:29:04 -0000 Subject: [Bug 33116] Re: powernow-k8 refuses to load References: <20060228031323.27016.20737.malonedeb@gangotri.ubuntu.com> Message-ID: <20060402092904.5415.81103.malone@gangotri.ubuntu.com> Same here, still not fixed in 2.6.15-19-k7. -- powernow-k8 refuses to load https://launchpad.net/malone/bugs/33116 From ubuntu-bugs at henrik.synth.no Sun Apr 2 10:56:49 2006 From: ubuntu-bugs at henrik.synth.no (neu) Date: Sun, 02 Apr 2006 10:56:49 -0000 Subject: [Bug 37703] linux-image-2.6.15 fails to boot on Lifebook B2131 References: <20060402105649.23733.91763.malonedeb@gandwana.ubuntu.com> Message-ID: <20060402105649.23733.91763.malonedeb@gandwana.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 linux-image-2.6.15-19-386 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: When trying to boot from linux-image-2.6.15-19-386, the computer crashes directly after the 'ok, booting linux' message. There might be a message (two or three lines) like '..error inserting...' just before the crash, but it's too brief to see properly. Here is a picture of the garbled on-screen image I get when I crash: http://henrik.synth.no/ubuntu/crash-2.6.15.jpg If I remove 'splash' from the grub boot line, the computer just freezes after 'ok booting linux'. No more info is displayed. I have a Fujitsu-Siemens Lifebook B2131 laptop with xubuntu- desktop/dapper installed. Here is the dmesg when booting (succesfully) with the latest 2.6.12 kernel, it might give some clues on my hardware: [4294667.296000] Linux version 2.6.12-10-386 (buildd at terranova) (gcc version 3.4.5 20050809 (prerelease) (Ubuntu 3.4.4-6ubuntu8.1)) #1 Sat Mar 11 16:13:17 UTC 2006 [4294667.296000] BIOS-provided physical RAM map: [4294667.296000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [4294667.296000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [4294667.296000] BIOS-e820: 00000000000ec400 - 0000000000100000 (reserved) [4294667.296000] BIOS-e820: 0000000000100000 - 0000000007fe0000 (usable) [4294667.296000] BIOS-e820: 0000000007fe0000 - 0000000007fefc00 (ACPI data) [4294667.296000] BIOS-e820: 0000000007fefc00 - 0000000007ff0000 (ACPI NVS) [4294667.296000] BIOS-e820: 0000000007ff0000 - 0000000007ff1000 (reserved) [4294667.296000] BIOS-e820: 0000000007ff1000 - 0000000008000000 (usable) [4294667.296000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) [4294667.296000] 0MB HIGHMEM available. [4294667.296000] 128MB LOWMEM available. [4294667.296000] On node 0 totalpages: 32768 [4294667.296000] DMA zone: 4096 pages, LIFO batch:1 [4294667.296000] Normal zone: 28672 pages, LIFO batch:15 [4294667.296000] HighMem zone: 0 pages, LIFO batch:1 [4294667.296000] DMI 2.3 present. [4294667.296000] ACPI: RSDP (v000 FUJ ) @ 0x000f68d0 [4294667.296000] ACPI: RSDT (v001 FUJ CHIFFON 0x01080000 FUJ 0x00001000) @ 0x07fecb24 [4294667.296000] ACPI: FADT (v001 FUJ CHIFFON 0x01080000 FUJ 0x00001000) @ 0x07fefb8c [4294667.296000] ACPI: DSDT (v001 FUJ CHIFFON 0x01080000 MSFT 0x01000007) @ 0x00000000 [4294667.296000] ACPI: PM-Timer IO Port: 0xff08 [4294667.296000] Allocating PCI resources starting at 08000000 (gap: 08000000:f7f00000) [4294667.296000] Built 1 zonelists [4294667.296000] Kernel command line: root=/dev/hda2 ro quiet splash [4294667.296000] Local APIC disabled by BIOS -- you can enable it with "lapic" [4294667.296000] mapped APIC to ffffd000 (01101000) [4294667.296000] Initializing CPU#0 [4294667.296000] PID hash table entries: 1024 (order: 10, 16384 bytes) [4294667.296000] Detected 398.293 MHz processor. [4294667.296000] Using pmtmr for high-res timesource [4294667.296000] Console: colour VGA+ 80x25 [4294667.728000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) [4294667.729000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) [4294667.746000] Memory: 121092k/131072k available (1416k kernel code, 9224k reserved, 762k data, 224k init, 0k highmem) [4294667.746000] Checking if this processor honours the WP bit even in supervisor mode... Ok. [4294667.746000] Calibrating delay loop... 788.48 BogoMIPS (lpj=394240) [4294667.769000] Security Framework v1.0.0 initialized [4294667.769000] SELinux: Disabled at boot. [4294667.769000] Mount-cache hash table entries: 512 [4294667.769000] CPU: After generic identify, caps: 0383f9ff 00000000 00000000 00000000 00000000 00000000 00000000 [4294667.769000] CPU: After vendor identify, caps: 0383f9ff 00000000 00000000 00000000 00000000 00000000 00000000 [4294667.769000] CPU: L1 I cache: 16K, L1 D cache: 16K [4294667.769000] CPU: L2 cache: 128K [4294667.769000] CPU: After all inits, caps: 0383f9ff 00000000 00000000 00000040 00000000 00000000 00000000 [4294667.769000] CPU: Intel Celeron (Coppermine) stepping 01 [4294667.769000] Enabling fast FPU save and restore... done. [4294667.769000] Enabling unmasked SIMD FPU exception support... done. [4294667.769000] Checking 'hlt' instruction... OK. [4294667.773000] Checking for popad bug... OK. [4294667.773000] checking if image is initramfs... it is [4294669.808000] Freeing initrd memory: 5319k freed [4294669.812000] ACPI: Looking for DSDT in initrd... not found! [4294670.119000] not found! [4294670.183000] NET: Registered protocol family 16 [4294670.184000] EISA bus registered [4294670.184000] ACPI: bus type pci registered [4294670.185000] PCI: PCI BIOS revision 2.10 entry at 0xfd9be, last bus=1 [4294670.185000] PCI: Using configuration type 1 [4294670.185000] mtrr: v2.0 (20020519) [4294670.186000] ACPI: Subsystem revision 20050729 [4294670.211000] ACPI: Interpreter enabled [4294670.211000] ACPI: Using PIC for interrupt routing [4294670.212000] ACPI: PCI Root Bridge [PCI0] (0000:00) [4294670.212000] PCI: Probing PCI hardware (bus 00) [4294670.212000] ACPI: Assume root bridge [\_SB_.PCI0] segment is 0 [4294670.212000] ACPI: Assume root bridge [\_SB_.PCI0] bus is 0 [4294670.225000] Boot video device is 0000:00:14.0 [4294670.230000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [4294670.236000] burst-mode-ec-10-Aug [4294670.236000] ACPI: Embedded Controller [EC] (gpe 44) [4294670.251000] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 *9 10 11) [4294670.253000] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *9 10 11) [4294670.254000] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 *9 10 11) [4294670.256000] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 *9 10 11) [4294670.257000] ACPI: Power Resource [USBP] (on) [4294670.261000] Linux Plug and Play Support v0.97 (c) Adam Belay [4294670.261000] pnp: PnP ACPI init [4294670.277000] pnp: PnP ACPI: found 10 devices [4294670.277000] PnPBIOS: Disabled by ACPI PNP [4294670.277000] PCI: Using ACPI for IRQ routing [4294670.277000] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report[4294670.280000] pnp: 00:00: ioport range 0x4d0-0x4d1 has been reserved [4294670.280000] pnp: 00:00: ioport range 0xff00-0xff3f could not be reserved [4294670.280000] pnp: 00:00: ioport range 0xf800-0xf87f has been reserved [4294670.282000] audit: initializing netlink socket (disabled) [4294670.282000] audit: initialized [4294670.283000] VFS: Disk quotas dquot_6.5.1 [4294670.283000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [4294670.283000] devfs: 2004-01-31 Richard Gooch (rgooch at atnf.csiro.au) [4294670.283000] devfs: boot_options: 0x0 [4294670.283000] Initializing Cryptographic API [4294670.284000] isapnp: Scanning for PnP cards... [4294670.637000] isapnp: No Plug & Play device found [4294670.744000] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [4294670.747000] serio: i8042 AUX port at 0x60,0x64 irq 12 [4294670.747000] serio: i8042 KBD port at 0x60,0x64 irq 1 [4294670.747000] Serial: 8250/16550 driver $Revision: 1.90 $ 54 ports, IRQ sharing enabled [4294670.759000] io scheduler noop registered [4294670.760000] io scheduler anticipatory registered [4294670.760000] io scheduler deadline registered [4294670.760000] io scheduler cfq registered [4294670.762000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [4294670.763000] EISA: Probing bus 0 at eisa.0 [4294670.763000] Cannot allocate resource for EISA slot 1 [4294670.763000] EISA: Detected 0 cards. [4294670.763000] NET: Registered protocol family 2 [4294670.773000] IP: routing cache hash table of 1024 buckets, 8Kbytes [4294670.773000] TCP established hash table entries: 8192 (order: 4, 65536 bytes) [4294670.773000] TCP bind hash table entries: 8192 (order: 3, 32768 bytes) [4294670.774000] TCP: Hash tables configured (established 8192 bind 8192) [4294670.774000] NET: Registered protocol family 8 [4294670.774000] NET: Registered protocol family 20 [4294670.774000] ACPI wakeup devices: [4294670.774000] PCI0 LID [4294670.774000] ACPI: (supports S0 S1 S3 S4 S5) [4294670.776000] Freeing unused kernel memory: 224k freed [4294670.803000] input: AT Translated Set 2 keyboard on isa0060/serio0 [4294671.096000] vga16fb: initializing [4294671.096000] vga16fb: mapped to 0xc00a0000 [4294671.170000] Console: switching to colour frame buffer device 80x30 [4294671.170000] fb0: VGA16 VGA frame buffer device [4294672.338000] Capability LSM initialized [4294672.398000] NET: Registered protocol family 1 [4294672.482000] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [4294672.482000] ACPI: Processor [CPU0] (supports 8 throttling states) [4294672.629000] ACPI: Thermal Zone [TZ1] (53 C) [4294673.085000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [4294673.085000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [4294673.085000] ACPI: bus type ide registered [4294673.089000] Probing IDE interface ide0... [4294673.473000] hda: IC25N040ATCS04-0, ATA DISK drive [4294674.085000] Probing IDE interface ide1... [4294674.598000] Probing IDE interface ide2... [4294675.111000] Probing IDE interface ide3... [4294675.624000] Probing IDE interface ide4... [4294676.137000] Probing IDE interface ide5... [4294676.650000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [4294676.677000] hda: max request size: 128KiB [4294676.697000] hda: 78140160 sectors (40007 MB) w/1768KiB Cache, CHS=65535/16/63 [4294676.697000] hda: cache flushes not supported [4294676.697000] /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 < p5 > [4294677.880000] Attempting manual resume [4294677.881000] swsusp: Suspend partition has wrong signature? [4294677.950000] kjournald starting. Commit interval 5 seconds [4294677.951000] EXT3-fs: mounted filesystem with ordered data mode. [4294690.910000] usbcore: registered new driver usbfs [4294690.910000] usbcore: registered new driver hub [4294691.073000] USB Universal Host Controller Interface driver v2.2 [4294691.073000] PCI: Enabling device 0000:00:07.2 (0000 -> 0001) [4294691.074000] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 9 [4294691.074000] PCI: setting IRQ 9 as level-triggered [4294691.074000] ACPI: PCI Interrupt 0000:00:07.2[D] -> Link [LNKD] -> GSI 9 (level, low) -> IRQ 9 [4294691.074000] uhci_hcd 0000:00:07.2: Intel Corporation 82440MX USB Universal Host Controller[4294691.144000] uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1 [4294691.145000] uhci_hcd 0000:00:07.2: irq 9, io base 0x000014a0 [4294691.148000] hub 1-0:1.0: USB hub found [4294691.149000] hub 1-0:1.0: 2 ports detected [4294691.383000] lp: driver loaded but no devices found [4294691.732000] mice: PS/2 mouse device common for all mice [4294692.260000] input.c: calling hotplug without a hotplug agent defined [4294692.260000] input: PS/2 Generic Mouse on isa0060/serio1 [4294692.354000] ndiswrapper version 1.1 loaded (preempt=no,smp=no) [4294692.981000] ndiswrapper (wrapper_init:1534): loadndiswrapper failed (1280); check system log for messages from 'loadndisdriver' [4294693.247000] Adding 369452k swap on /dev/hda5. Priority:-1 extents:1 [4294694.505000] EXT3 FS on hda2, internal journal [4294695.562000] md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27 [4294696.653000] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel at redhat.com [4294699.876000] ndiswrapper version 1.1 loaded (preempt=no,smp=no) [4294701.445000] NET: Registered protocol family 17 [4294701.825000] Linux Kernel Card Services [4294701.825000] options: [pci] [cardbus] [pm] [4294701.847000] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 9 [4294701.847000] ACPI: PCI Interrupt 0000:00:13.0[A] -> Link [LNKA] -> GSI 9 (level, low) -> IRQ 9 [4294701.847000] Yenta: CardBus bridge found at 0000:00:13.0 [10cf:10c6] [4294701.848000] Yenta: adjusting diagnostic: 41 -> 61 [4294701.848000] Yenta: Using CSCINT to route CSC interrupts to PCI [4294701.848000] Yenta: Routing CardBus interrupts to PCI [4294701.848000] Yenta TI: socket 0000:00:13.0, mfunc 0x01d11622, devctl 0x46 [4294702.069000] Yenta: ISA IRQ mask 0x0cb8, PCI irq 9 [4294702.069000] Socket status: 30000020 [4294703.019000] ndiswrapper: driver lstinds (Linksys,03/10/2004,6.0.0.18) loaded [4294703.020000] PCI: Enabling device 0000:01:00.0 (0000 -> 0002) [4294703.020000] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 9 (level, low) -> IRQ 9 [4294703.021000] PCI: Setting latency timer of device 0000:01:00.0 to 64 [4294703.709000] ndiswrapper: using irq 9 [4294704.070000] spurious 8259A interrupt: IRQ7. [4294704.248000] wlan0: ndiswrapper ethernet device 00:14:bf:09:b8:8f using driver lstinds, configuration file 104C:9066:1737:0033.5.conf [4294704.249000] wlan0: encryption modes supported: WEP, WPA with TKIP [4294704.358000] cs: IO port probe 0x100-0x4ff: clean. [4294704.360000] cs: IO port probe 0xc00-0xcf7: clean. [4294704.360000] cs: IO port probe 0xa00-0xaff: clean. [4294704.951000] Real Time Clock Driver v1.12 [4294705.026000] Generic RTC Driver v1.07 [4294706.664000] ACPI: AC Adapter [AC] (on-line) [4294706.840000] ACPI: Battery Slot [CMB1] (battery present) [4294706.916000] ACPI: Power Button (FF) [PWRF] [4294706.916000] ACPI: Power Button (CM) [PWRB] [4294706.916000] ACPI: Lid Switch [LID] [4294707.305000] ibm_acpi: ec object not found [4294707.725000] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) [4294726.170000] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) [4294726.170000] apm: overridden by ACPI. [4294726.321000] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) [4294726.321000] apm: disabled on user request. [4294733.758000] SCSI subsystem initialized [4294739.590000] NET: Registered protocol family 10 [4294739.590000] Disabled Privacy Extensions on device c02eb280(lo) [4294739.591000] IPv6 over IPv4 tunneling driver [4294753.704000] wlan0: no IPv6 routers present [4294906.313000] spurious 8259A interrupt: IRQ15. -- linux-image-2.6.15 fails to boot on Lifebook B2131 https://launchpad.net/malone/bugs/37703 From javiermon at gmail.com Sun Apr 2 11:04:04 2006 From: javiermon at gmail.com (kmon) Date: Sun, 02 Apr 2006 11:04:04 -0000 Subject: [Bug 37575] Re: bcm43 errors & no wifi References: <20060401111406.23707.88085.malonedeb@gandwana.ubuntu.com> Message-ID: <20060402110404.23733.29747.malone@gandwana.ubuntu.com> Hi I found some info. Apparently, this kernel driver doesn't support WPA/WEP with a rate different than 11M. So, doing: sudo iwconfig eth1 rate 11M resolved the connection failures. ** Summary changed: - bcm43 errors & no wifi + bcm43 errors & no wifi with rate=54M -- bcm43 errors & no wifi with rate=54M https://launchpad.net/malone/bugs/37575 From javiermon at gmail.com Sun Apr 2 11:05:35 2006 From: javiermon at gmail.com (kmon) Date: Sun, 02 Apr 2006 11:05:35 -0000 Subject: [Bug 37575] Re: bcm43 errors & no wifi with rate=54M References: <20060401111406.23707.88085.malonedeb@gandwana.ubuntu.com> Message-ID: <20060402110535.23707.85770.malone@gandwana.ubuntu.com> Changed description of the bug to include my recent rate discovers. -- bcm43 errors & no wifi with rate=54M https://launchpad.net/malone/bugs/37575 From samtygier at yahoo.co.uk Sun Apr 2 11:20:01 2006 From: samtygier at yahoo.co.uk (sam tygier) Date: Sun, 02 Apr 2006 11:20:01 -0000 Subject: [Bug 37112] Re: iBook G4, on resume from sleep, enables touch-to-click despite my preferences References: <20060329032925.6253.87634.malonedeb@gandwana.ubuntu.com> Message-ID: <20060402112001.23733.59501.malone@gandwana.ubuntu.com> confirmed on a titanium g4 powerbook. -- iBook G4, on resume from sleep, enables touch-to-click despite my preferences https://launchpad.net/malone/bugs/37112 From samtygier at yahoo.co.uk Sun Apr 2 11:21:10 2006 From: samtygier at yahoo.co.uk (sam tygier) Date: Sun, 02 Apr 2006 11:21:10 -0000 Subject: [Bug 37112] Re: iBook G4, on resume from sleep, enables touch-to-click despite my preferences References: <20060329032925.6253.87634.malonedeb@gandwana.ubuntu.com> Message-ID: <20060402112111.5441.6406.malone@gangotri.ubuntu.com> i think pbbuttonsd is responsible for these sorts of things ** Changed in: Ubuntu Sourcepackagename: None => pbbuttonsd Status: Unconfirmed => Confirmed -- iBook G4, on resume from sleep, enables touch-to-click despite my preferences https://launchpad.net/malone/bugs/37112 From avilella at gmail.com Sun Apr 2 11:51:58 2006 From: avilella at gmail.com (Albert Vilella) Date: Sun, 02 Apr 2006 11:51:58 -0000 Subject: [Bug 35319] Re: no Fn at all Vaio SZ1XP Dapper References: <20060317124552.11105.6446.malonedeb@gandwana.ubuntu.com> Message-ID: <20060402115158.23733.30249.malone@gandwana.ubuntu.com> Still happening with 2.6.15-19 and latest packages from update-manager. -- no Fn at all Vaio SZ1XP Dapper https://launchpad.net/malone/bugs/35319 From ulrik.sverdrup at gmail.com Sun Apr 2 12:29:26 2006 From: ulrik.sverdrup at gmail.com (Ulrik Sverdrup) Date: Sun, 02 Apr 2006 12:29:26 -0000 Subject: [Bug 37714] Sound garbled after resume after suspend References: <20060402122926.5415.33178.malonedeb@gangotri.ubuntu.com> Message-ID: <20060402122926.5415.33178.malonedeb@gangotri.ubuntu.com> Public bug reported: Affects: linux-meta linux-image-2.6-powerpc (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: I have an ibook G4 and suspend/resume works fine. In breezy: Sounds is muted after resume. Push a volume key and it comes back to normal. Regressed in dapper: Sound is muted after resume. Push a volume key and it comes back, but any sound playback stutters. Gaim sounds _almost_ like normal but if you try to play music it sounds horrible. The only thing I've seen in the kernel log shown when suspend/resuming is "failed to set volume" just before suspending [this is probably related to the volume thing and not the distortion] [that error message is probably from Linux/sound/ppc/tumbler.c, the ppc sound driver] -- Sound garbled after resume after suspend https://launchpad.net/malone/bugs/37714 From danilopiazza at gmail.com Sun Apr 2 12:59:19 2006 From: danilopiazza at gmail.com (Danilo Piazzalunga) Date: Sun, 02 Apr 2006 12:59:19 -0000 Subject: [Bug 30395] Re: X-Server Crashes when switch back from terminal tty References: <20060203130714.29848.23643.malonedeb@gangotri.ubuntu.com> Message-ID: <20060402125919.5441.50113.malone@gangotri.ubuntu.com> I experienced this issue as well, but only if I switch to a text console while Gnome is starting. Once it is up and running, I can switch freely. My hardware is a Toshiba Satellite M70 with an Intel i915gm graphics controller. ** Attachment added: "Xorg log file of a crashing session" http://librarian.launchpad.net/1915985/Xorg.0.log.2006-03-31.1 -- X-Server Crashes when switch back from terminal tty https://launchpad.net/malone/bugs/30395 From josef86 at gmail.com Sun Apr 2 13:48:11 2006 From: josef86 at gmail.com (isodude) Date: Sun, 02 Apr 2006 13:48:11 -0000 Subject: [Bug 34870] No time. References: <20060314104909.30082.87848.malonedeb@gandwana.ubuntu.com> Message-ID: <20060402134811.23733.77651.malone@gandwana.ubuntu.com> I'm got kernel panic ( with information ) now, don't know how it relates. This is with -19 kernel. My lockups where hard ones. Could'nt do nothing, everything died. It has still occured once in a while, where random though, like once per day, have been doing alot testing around opengl and fglrx drivers. My system consist of a Radeon 9600XT, AMD 64 3000+ s754 512MB PC3200, Creative PCI128, sata disks and pata disks. The motherboard is a Asus KV80. I'm going to do my time in the military tomorrow, so my time for testing is running out. Hope you solve this, I'm going back to Breezy now. -- ipw2200 repeatedly crashes. https://launchpad.net/malone/bugs/34870 From matt.price at utoronto.ca Sun Apr 2 14:24:49 2006 From: matt.price at utoronto.ca (Matt Price) Date: Sun, 02 Apr 2006 14:24:49 -0000 Subject: [Bug 29825] dapper kernel doesn't boot from scsi disk on b/w G2 (powerpc) References: <20060127015708.26274.24833.malonedeb@gangotri.ubuntu.com> Message-ID: <20060402142449.5441.5294.launchpad@canonical@gangotri.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: [couldn't assign the bug to the kernel image, which was not in the list of options, so stuck it to ubuntu-meta!] While install & live cd's boot fine, and I can also boot off of an ide disk, neither the breezy northe dapper kernels boot off of my scsi disks. Presumably this is a problem with the initrd/initramfs's, which I guess can't find my scsi bus (or possibly get confused by the existence of the legacy "MESH" scsi bus which was uselessly implanted on blue&white G3's). I was able to roll my own 2.6.15 kernel & fix the problem, using an older debian kernel of my own as a model. This kernel does not use an initrd, so perhaps not a good model, but I would be willing to try out other options in an effort to fix the bug -- especially if I can get some guidance on this, since I'm just a li'l old user. config of my kernel attached (assuming I can do that through malone). Matt Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: [couldn't assign the bug to the kernel image, which was not in the list of options, so stuck it to ubuntu-meta!] While install & live cd's boot fine, and I can also boot off of an ide disk, neither the breezy northe dapper kernels boot off of my scsi disks. Presumably this is a problem with the initrd/initramfs's, which I guess can't find my scsi bus (or possibly get confused by the existence of the legacy "MESH" scsi bus which was uselessly implanted on blue&white G3's). I was able to roll my own 2.6.15 kernel & fix the problem, using an older debian kernel of my own as a model. This kernel does not use an initrd, so perhaps not a good model, but I would be willing to try out other options in an effort to fix the bug -- especially if I can get some guidance on this, since I'm just a li'l old user. config of my kernel attached (assuming I can do that through malone). Matt -- dapper kernel doesn't boot from scsi disk on b/w G2 (powerpc) https://launchpad.net/malone/bugs/29825 From elemmers at ebdynamics.com Sun Apr 2 14:27:43 2006 From: elemmers at ebdynamics.com (Ed Lemmers) Date: Sun, 02 Apr 2006 14:27:43 -0000 Subject: [Bug 29955] Ubuntu for AMD 64 won't install on WinBook References: <20060128225753.26234.30450.malonedeb@gangotri.ubuntu.com> Message-ID: <20060402142743.5441.5379.launchpad@canonical@gangotri.ubuntu.com> Public bug reported: Affects: easyubuntu (upstream) Severity: Normal Priority: (none set) Status: Rejected Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Needs Info Description: Install freezes very early on in install just after "input : AT Translated Set 2 keyboard on isa0060/serio0" on Winbook model A710 which has an AMD64 processor. Note that x386 does not do this. Public bug reported: Affects: easyubuntu (upstream) Severity: Normal Priority: (none set) Status: Rejected Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Needs Info Description: Install freezes very early on in install just after "input : AT Translated Set 2 keyboard on isa0060/serio0" on Winbook model A710 which has an AMD64 processor. Note that x386 does not do this. -- Ubuntu for AMD 64 won't install on WinBook https://launchpad.net/malone/bugs/29955 From samtygier at yahoo.co.uk Sun Apr 2 14:28:52 2006 From: samtygier at yahoo.co.uk (sam tygier) Date: Sun, 02 Apr 2006 14:28:52 -0000 Subject: [Bug 29971] Re: Ubuntu doesn't detect and install my wireless orinoco_usb chipset References: <20060129095757.9344.91081.malonedeb@gandwana.ubuntu.com> Message-ID: <20060402142852.23733.59916.malone@gandwana.ubuntu.com> this is not a rejection, just a tidy up, the bug does not need to be against ubuntu and linux-source-2.6.15 ** Changed in: Ubuntu Status: Unconfirmed => Rejected -- Ubuntu doesn't detect and install my wireless orinoco_usb chipset https://launchpad.net/malone/bugs/29971 From samtygier at yahoo.co.uk Sun Apr 2 14:24:48 2006 From: samtygier at yahoo.co.uk (sam tygier) Date: Sun, 02 Apr 2006 14:24:48 -0000 Subject: [Bug 29825] Re: dapper kernel doesn't boot from scsi disk on b/w G2 (powerpc) References: <20060127015708.26274.24833.malonedeb@gangotri.ubuntu.com> Message-ID: <20060402142449.5441.18411.launchpad@gangotri.ubuntu.com> ** Changed in: Ubuntu Sourcepackagename: None => linux-source-2.6.15 ** Summary changed: - dapper kernel doesn't boot from scsi disk on b/w G2 (powerpc) + dapper kernel doesn't boot from scsi disk on b/w G3 (powerpc) -- dapper kernel doesn't boot from scsi disk on b/w G3 (powerpc) https://launchpad.net/malone/bugs/29825 From samtygier at yahoo.co.uk Sun Apr 2 14:27:42 2006 From: samtygier at yahoo.co.uk (sam tygier) Date: Sun, 02 Apr 2006 14:27:42 -0000 Subject: [Bug 29955] Re: Ubuntu for AMD 64 won't install on WinBook References: <20060128225753.26234.30450.malonedeb@gangotri.ubuntu.com> Message-ID: <20060402142743.5441.45605.malone@gangotri.ubuntu.com> can you try again with dapper flight 6 http://cdimage.ubuntu.com/releases/dapper/ thanks ** Changed in: Ubuntu Sourcepackagename: None => linux-source-2.6.15 Status: Unconfirmed => Needs Info ** Bug 30024 has been marked a duplicate of this bug -- Ubuntu for AMD 64 won't install on WinBook https://launchpad.net/malone/bugs/29955 From samtygier at yahoo.co.uk Sun Apr 2 14:30:51 2006 From: samtygier at yahoo.co.uk (sam tygier) Date: Sun, 02 Apr 2006 14:30:51 -0000 Subject: [Bug 30024] Re: Install and Live hangs on Winbook References: <20060129234338.9306.75784.malonedeb@gandwana.ubuntu.com> Message-ID: <20060402143051.5415.95680.launchpad@gangotri.ubuntu.com> *** This bug is a duplicate of bug 29955 *** ** This bug has been marked a duplicate of bug 29955 Ubuntu for AMD 64 won't install on WinBook -- Install and Live hangs on Winbook https://launchpad.net/malone/bugs/30024 From xavier.verne at free.fr Sun Apr 2 14:57:13 2006 From: xavier.verne at free.fr (Xavier Verne) Date: Sun, 02 Apr 2006 14:57:13 -0000 Subject: [Bug 33531] Re: IPW3945 driver support References: <20060303102711.22115.46177.malonedeb@gandwana.ubuntu.com> Message-ID: <20060402145713.5441.46477.malone@gangotri.ubuntu.com> *** This bug is a duplicate of bug 35215 *** Oops, clicked on "Needs fixing here" button by mistake. Don't know how to revert, so adding this comment. -- IPW3945 driver support https://launchpad.net/malone/bugs/33531 From lukasz.halman at gmail.com Sun Apr 2 15:23:37 2006 From: lukasz.halman at gmail.com (=?utf-8?q?=C5=81ukasz_Halman?=) Date: Sun, 02 Apr 2006 15:23:37 -0000 Subject: [Bug 37132] Fan non-stop on after long suspend - MSI S260 References: <20060329082822.7863.46602.malonedeb@gangotri.ubuntu.com> Message-ID: <20060402152337.23707.57870.launchpad@canonical@gandwana.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: If I let my MSI S260 in suspend state over night, when I resume it on the next day the cpu fan won't turn off. It's spinning at maximum speed all the time, despite the fact that cpu temperature is around 30C, which is 10C less than normally. Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: If I let my MSI S260 in suspend state over night, when I resume it on the next day the cpu fan won't turn off. It's spinning at maximum speed all the time, despite the fact that cpu temperature is around 30C, which is 10C less than normally. -- Fan non-stop on after long suspend - MSI S260 https://launchpad.net/malone/bugs/37132 From mdz at ubuntu.com Sun Apr 2 15:23:36 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Sun, 02 Apr 2006 15:23:36 -0000 Subject: [Bug 37132] Re: Fan non-stop on after long suspend - MSI S260 References: <20060329082822.7863.46602.malonedeb@gangotri.ubuntu.com> Message-ID: <20060402152337.23707.83672.launchpad@gandwana.ubuntu.com> ** Changed in: acpi-support (Ubuntu) Sourcepackagename: acpi-support => linux-source-2.6.15 Binarypackagename: acpi-support => None -- Fan non-stop on after long suspend - MSI S260 https://launchpad.net/malone/bugs/37132 From ubuntu at paul.sladen.org Sun Apr 2 15:25:43 2006 From: ubuntu at paul.sladen.org (Paul Sladen) Date: Sun, 02 Apr 2006 15:25:43 -0000 Subject: [Bug 35215] Re: ipw3945 driver required for functionality on new Intel PRO/Wireless 3945ABG Mini-PCI Express Adapters References: <20060316173707.11105.89035.malonedeb@gandwana.ubuntu.com> Message-ID: <20060402152543.23707.19823.malone@gandwana.ubuntu.com> Can we get it into the kernels so that if can be tested? -- ipw3945 driver required for functionality on new Intel PRO/Wireless 3945ABG Mini-PCI Express Adapters https://launchpad.net/malone/bugs/35215 From manu.cornet at gmail.com Sun Apr 2 16:47:13 2006 From: manu.cornet at gmail.com (Manu Cornet) Date: Sun, 02 Apr 2006 16:47:13 -0000 Subject: [Bug 28543] Re: USB and PCI cards don't work on a recent motherboard References: <20060114143255.6048.44490.malonedeb@gangotri.ubuntu.com> Message-ID: <20060402164713.23733.52279.malone@gandwana.ubuntu.com> The same problem happens while booting with a flight 6 live CD (if I don't provide acpi=noirq as a boot option, all USB devices freeze after a few minutes). If there is an entry about this motherboard, shouldn't the live CD boot without providing any extra info ? Reopening the bug. Tell me if I should do something else (like opening a new bug report instead of reopening this one). ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Fix Released => Unconfirmed -- USB and PCI cards don't work on a recent motherboard https://launchpad.net/malone/bugs/28543 From 84yelo3 at gmail.com Sun Apr 2 17:19:36 2006 From: 84yelo3 at gmail.com (=?utf-8?q?Nicol=C3=B2_Chieffo?=) Date: Sun, 02 Apr 2006 17:19:36 -0000 Subject: [Bug 6029] Re: screen flickers with vga16fb References: <20051221214735.24631.23284.malonedeb@gangotri.ubuntu.com> Message-ID: <20060402171936.23733.94205.malone@gandwana.ubuntu.com> currently I own an asus M6Ne series and SOMETIMES I had this bug too... see https://launchpad.net/malone/24270 -- screen flickers with vga16fb https://launchpad.net/malone/bugs/6029 From kleeman at cims.nyu.edu Sun Apr 2 19:54:16 2006 From: kleeman at cims.nyu.edu (Richard Kleeman) Date: Sun, 02 Apr 2006 19:54:16 -0000 Subject: [Bug 14394] Re: cdrecord/k3b/nautilus problem References: <20060113133632.21012.3776.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060402195416.23733.60885.malone@gandwana.ubuntu.com> Reinstalled dapper from a fresh breezy install using apt-get dist-upgrade. The latest kernel (2.6.15-19) with version 3.0 of aic79xx now boots however during the boot the same error message as previously occurs. I have listed it: [4294705.439000] SCSI device sda: 286749488 512-byte hdwr sectors (146816 MB) [4294705.954000] scsi1: Invalid Sequencer interrupt occurred. [4294705.954000] >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<< [4294705.954000] scsi1: Dumping Card State at program address 0x236 Mode 0x0 [4294705.954000] Card was paused [4294705.954000] INTSTAT[0x0] SELOID[0x4] SELID[0x0] [4294705.954000] HS_MAILBOX[0x0] INTCTL[0x80]:(SWTMINTMASK) [4294705.954000] SEQINTSTAT[0x0] SAVED_MODE[0x11] [4294705.954000] DFFSTAT[0x33]:(CURRFIFO_NONE|FIFO0FREE|FIFO1FREE) [4294705.954000] SCSISIGI[0x0]:(P_DATAOUT) SCSIPHASE[0x0] [4294705.954000] SCSIBUS[0x0] LASTPHASE[0x1]:(P_DATAOUT|P_BUSFREE) [4294705.954000] SCSISEQ0[0x0] SCSISEQ1[0x12]:(ENAUTOATNP|ENRSELI) [4294705.954000] SEQCTL0[0x0] SEQINTCTL[0x6]:(INTMASK1|INTMASK2) [4294705.954000] SEQ_FLAGS[0x0] SEQ_FLAGS2[0x0] QFREEZE_COUNT[0x1] [4294705.954000] KERNEL_QFREEZE_COUNT[0x1] MK_MESSAGE_SCB[0xff00] [4294705.954000] MK_MESSAGE_SCSIID[0xff] SSTAT0[0x0] [4294705.954000] SSTAT1[0x0] SSTAT2[0x0] SSTAT3[0x0] [4294705.954000] PERRDIAG[0x0] SIMODE1[0xa4]:(ENSCSIPERR|ENSCSIRST|ENSELTIMO) [4294705.954000] LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0] [4294705.954000] LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0xe1]:(LQOSTOP0|LQOPKT) [4294705.954000] [4294705.954000] SCB Count = 4 CMDS_PENDING = 0 LASTSCB 0xffff CURRSCB 0x3 NEXTSCB 0xff80 [4294705.954000] qinstart = 30 qinfifonext = 30 [4294705.954000] QINFIFO: [4294705.954000] WAITING_TID_QUEUES: [4294705.954000] Pending list: [4294705.954000] Total 0 [4294705.954000] Kernel Free SCB list: 2 3 1 0 [4294705.954000] Sequencer Complete DMA-inprog list: [4294705.954000] Sequencer Complete list: [4294705.954000] Sequencer DMA-Up and Complete list: [4294705.954000] Sequencer On QFreeze and Complete list: [4294705.954000] [4294705.954000] [4294705.954000] scsi1: FIFO0 Free, LONGJMP == 0x8000, SCB 0x2 [4294705.954000] SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS) [4294705.954000] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL) [4294705.954000] SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] [4294705.954000] DFFSXFRCTL[0x0] SOFFCNT[0x0] MDFFSTAT[0x5]:(FIFOFREE|DLZERO) [4294705.954000] SHADDR = 0x00, SHCNT = 0x0 HADDR = 0x00, HCNT = 0x0 [4294705.954000] CCSGCTL[0x10]:(SG_CACHE_AVAIL) [4294705.954000] [4294705.954000] scsi1: FIFO1 Free, LONGJMP == 0x8063, SCB 0x3 [4294705.954000] SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS) [4294705.954000] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL) [4294705.954000] SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] [4294705.954000] DFFSXFRCTL[0x0] SOFFCNT[0x0] MDFFSTAT[0x5]:(FIFOFREE|DLZERO) [4294705.954000] SHADDR = 0x00, SHCNT = 0x0 HADDR = 0x00, HCNT = 0x0 [4294705.954000] CCSGCTL[0x10]:(SG_CACHE_AVAIL) [4294705.954000] LQIN: 0x8 0x0 0x0 0x2 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 [4294705.954000] scsi1: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52 [4294705.954000] scsi1: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x1 [4294705.954000] scsi1: SAVED_SCSIID = 0x0 SAVED_LUN = 0x0 [4294705.954000] SIMODE0[0xc]:(ENOVERRUN|ENIOERR) [4294705.954000] CCSCBCTL[0x4]:(CCSCBDIR) [4294705.954000] scsi1: REG0 == 0x4d60, SINDEX = 0x10e, DINDEX = 0x10a [4294705.954000] scsi1: SCBPTR == 0x2, SCB_NEXT == 0xff80, SCB_NEXT2 == 0xff81 [4294705.954000] CDB 1a 0 8 80 8 68 [4294705.954000] STACK: 0x1a 0x0 0x0 0x0 0x0 0x0 0x0 0x0 [4294705.954000] <<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>> [4294707.265000] scsi1: Invalid Sequencer interrupt occurred. [4294707.265000] >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<< [4294707.265000] scsi1: Dumping Card State at program address 0x236 Mode 0x0 [4294707.265000] Card was paused [4294707.265000] INTSTAT[0x0] SELOID[0xa] SELID[0x0] [4294707.265000] HS_MAILBOX[0x0] INTCTL[0x80]:(SWTMINTMASK) [4294707.265000] SEQINTSTAT[0x0] SAVED_MODE[0x11] [4294707.265000] DFFSTAT[0x33]:(CURRFIFO_NONE|FIFO0FREE|FIFO1FREE) [4294707.265000] SCSISIGI[0x0]:(P_DATAOUT) SCSIPHASE[0x0] [4294707.265000] SCSIBUS[0x0] LASTPHASE[0x1]:(P_DATAOUT|P_BUSFREE) [4294707.265000] SCSISEQ0[0x0] SCSISEQ1[0x12]:(ENAUTOATNP|ENRSELI) [4294707.265000] SEQCTL0[0x0] SEQINTCTL[0x6]:(INTMASK1|INTMASK2) [4294707.265000] SEQ_FLAGS[0x0] SEQ_FLAGS2[0x0] QFREEZE_COUNT[0x2] [4294707.265000] KERNEL_QFREEZE_COUNT[0x2] MK_MESSAGE_SCB[0xff00] [4294707.265000] MK_MESSAGE_SCSIID[0xff] SSTAT0[0x0] [4294707.265000] SSTAT1[0x0] SSTAT2[0x0] SSTAT3[0x0] [4294707.265000] PERRDIAG[0x0] SIMODE1[0xa4]:(ENSCSIPERR|ENSCSIRST|ENSELTIMO) [4294707.265000] LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0] [4294707.265000] LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0xe1]:(LQOSTOP0|LQOPKT) [4294707.265000] [4294707.265000] SCB Count = 4 CMDS_PENDING = 0 LASTSCB 0xffff CURRSCB 0x2 NEXTSCB 0xffc0 [4294707.265000] qinstart = 38 qinfifonext = 38 [4294707.265000] QINFIFO: [4294707.265000] WAITING_TID_QUEUES: [4294707.265000] Pending list: [4294707.265000] Total 0 [4294707.265000] Kernel Free SCB list: 3 2 1 0 [4294707.265000] Sequencer Complete DMA-inprog list: [4294707.265000] Sequencer Complete list: [4294707.265000] Sequencer DMA-Up and Complete list: [4294707.265000] Sequencer On QFreeze and Complete list: [4294707.265000] [4294707.265000] [4294707.265000] scsi1: FIFO0 Free, LONGJMP == 0x8000, SCB 0x3 [4294707.265000] SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS) [4294707.265000] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL) [4294707.265000] SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] [4294707.265000] DFFSXFRCTL[0x0] SOFFCNT[0x0] MDFFSTAT[0x5]:(FIFOFREE|DLZERO) [4294707.265000] SHADDR = 0x00, SHCNT = 0x0 HADDR = 0x00, HCNT = 0x0 [4294707.265000] CCSGCTL[0x10]:(SG_CACHE_AVAIL) [4294707.265000] [4294707.265000] scsi1: FIFO1 Free, LONGJMP == 0x8063, SCB 0x3 [4294707.265000] SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS) [4294707.265000] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL) [4294707.265000] SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] [4294707.265000] DFFSXFRCTL[0x0] SOFFCNT[0x0] MDFFSTAT[0x5]:(FIFOFREE|DLZERO) [4294707.265000] SHADDR = 0x00, SHCNT = 0x0 HADDR = 0x00, HCNT = 0x0 [4294707.265000] CCSGCTL[0x10]:(SG_CACHE_AVAIL) [4294707.265000] LQIN: 0x8 0x0 0x0 0x3 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 [4294707.265000] scsi1: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52 [4294707.265000] scsi1: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x1 [4294707.265000] scsi1: SAVED_SCSIID = 0x0 SAVED_LUN = 0x0 [4294707.265000] SIMODE0[0xc]:(ENOVERRUN|ENIOERR) [4294707.265000] CCSCBCTL[0x4]:(CCSCBDIR) [4294707.265000] scsi1: REG0 == 0x4d60, SINDEX = 0x10e, DINDEX = 0x116 [4294707.265000] scsi1: SCBPTR == 0x3, SCB_NEXT == 0xffc0, SCB_NEXT2 == 0xff81 [4294707.265000] CDB 1a 0 8 80 8 6c [4294707.265000] STACK: 0x1a 0x0 0x0 0x0 0x0 0x0 0x0 0x0 [4294707.265000] <<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>> After booting into the new dapper I inserted a written CD-R in the burner and similar error messages as above occur but not kernel lockups occur now at least. -- cdrecord/k3b/nautilus problem https://launchpad.net/malone/bugs/14394 From ubuntu at chabada.sk Sun Apr 2 21:18:06 2006 From: ubuntu at chabada.sk (Peter Chabada) Date: Sun, 02 Apr 2006 21:18:06 -0000 Subject: [Bug 37771] network interface (marvell gigabit ethernet) stop working after a time References: <20060402211806.23707.89986.malonedeb@gandwana.ubuntu.com> Message-ID: <20060402211806.23707.89986.malonedeb@gandwana.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 linux-image-2.6.15-19-686 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: Up-to-date Dapper installation (2006-Apr-02). In my testing server I have 2 network interfaces. Intel EtherExpress Pro 100 that I use to connect to internet and is working properly. The second one is Marvell Gigabit Ethernet Controller (88E8053) integrated onboard (motherboard is Asus P5GD1Pro) which I'm using to connect to my home network. I have setup NAT to allow computers in my home network to access internet. I also setup sharing some folders (/var/cache/apt/archives/) on server for computers in home network (samba, nfs, ssh). Computers from home network can access internet, can browse web, use mail and while this uses small bandwitch (~2 Mbps) everything works fine. They can also download small files from shares. But when they try to download files in total 100+ MiB from shares (in higher speed - 100 Mbps) the Marvell ethernet interface stops working. Computers from network cannot ping this interface (even after restart of these computers) and cannot go through NAT. Server is able to ping this interface but cannot ping computers on home network. After "ifdown eth1; ifup eth1" is everything OK (for a time). Thats why I cannot download big or many files from shares on server and it does not mather if it is samba, nfs or ssh share. While accessing internet from home network through NAT interface broke only once (download of 180 MiB iso image with download manager). I made a watchdog which is looking if is network accessible and if not it make ifdown and ifup. But this is not solution. For details about Marvell ethernet controller see http://img100.imageshack.us/my.php?image=marvellethernetcontroller3mv.png In Breezy worked everything fine. -- network interface (marvell gigabit ethernet) stop working after a time https://launchpad.net/malone/bugs/37771 From pelikandr at beltav.hu Sun Apr 2 21:19:01 2006 From: pelikandr at beltav.hu (pelikandr) Date: Sun, 02 Apr 2006 21:19:01 -0000 Subject: [Bug 23763] Re: no sound on Clevo D900T References: <20060113142528.21012.36962.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060402211901.23733.2185.malone@gandwana.ubuntu.com> I haven't noticed that the "Front" channel in Alsa Mixer was muted by default. After enableing this channel the sound was ok. -- no sound on Clevo D900T https://launchpad.net/malone/bugs/23763 From siretart at tauware.de Sun Apr 2 21:24:30 2006 From: siretart at tauware.de (Reinhard Tartler) Date: Sun, 02 Apr 2006 21:24:30 -0000 Subject: [Bug 37120] Re: wpasupplicant doesn't work properly with rt2500 driver References: <20060329054652.7313.48354.malonedeb@gangotri.ubuntu.com> Message-ID: <20060402212430.5415.1912.malone@gangotri.ubuntu.com> wpasupplicant indeed had a driver backend for rt2500 based cards, but this backend never really worked and was therefore disabled in the package. You can try to recompile wpasupplicant with that support, but don't hope too much. The only real solution at this point seems to me to either make rt2500 provide the needed extensions or to switch to rt2x00, which is a dapper+1 think. IOW: I don't see wpa support for rt2500 based cards in dapper. Sorry. -- wpasupplicant doesn't work properly with rt2500 driver https://launchpad.net/malone/bugs/37120 From samtygier at yahoo.co.uk Sun Apr 2 21:35:13 2006 From: samtygier at yahoo.co.uk (sam tygier) Date: Sun, 02 Apr 2006 21:35:13 -0000 Subject: [Bug 37120] Re: wpasupplicant doesn't work properly with rt2500 driver References: <20060329054652.7313.48354.malonedeb@gangotri.ubuntu.com> Message-ID: <20060402213513.23733.11527.malone@gandwana.ubuntu.com> this will also mean no network-manager for rt2500 in dapper, as NM is using wpasupplicant as a back end now. -- wpasupplicant doesn't work properly with rt2500 driver https://launchpad.net/malone/bugs/37120 From ryan.sammartino at gmail.com Sun Apr 2 22:03:18 2006 From: ryan.sammartino at gmail.com (Ryan T. Sammartino) Date: Sun, 02 Apr 2006 22:03:18 -0000 Subject: [Bug 37775] drivers/usb/input/hid-core.c: usb_submit_urb(ctrl) failed References: <20060402220318.23733.70083.malonedeb@gandwana.ubuntu.com> Message-ID: <20060402220318.23733.70083.malonedeb@gandwana.ubuntu.com> Public bug reported: Affects: linux-source-2.6.12 linux-image-2.6.12-10-686 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: (See also http://bugzilla.kernel.org/show_bug.cgi?id=6134). Particulars: $ uname -a Linux ubuntu 2.6.12-10-686 #1 Sat Mar 11 16:22:51 UTC 2006 i686 GNU/Linux Hardware profile ID: c2e57c9fcdbe3a4de54681ee816b6659 Running a fresh install of Breezy. Plugging in a Logitech Dual Action joypad produces the following output in dmesg: [4294999.502000] usb 3-1: new low speed USB device using uhci_hcd and address 2 [4295009.641000] drivers/usb/input/hid-core.c: usb_submit_urb(ctrl) failed [4295009.641000] drivers/usb/input/hid-core.c: timeout initializing reports [4295009.641000] [4295009.647000] input: USB HID v1.10 Joystick [Logitech Logitech Dual Action] on usb-0000:00:1d.2-1 Eventually the system will freeze. If the joypad is plugged in during boot, a very long pause will happen during the splash screen at "Loading modules". Eventually I am dumped back to the console, where the usb_submit_urb(ctrl) failed message appears, and the system continues booting (except a guaranteed freeze will happen within 5-10 minutes). This behaviour is not observed on another system that I have (Mandriva SE 2006, 2.6.12-17mdksmp). Plugging in other USB joypads that I have access to (e.g. Xbox 360 controller, Gravis GamePad Pro) does not produce this "failed" message. -- drivers/usb/input/hid-core.c: usb_submit_urb(ctrl) failed https://launchpad.net/malone/bugs/37775 From achalil at gmail.com Sun Apr 2 23:54:08 2006 From: achalil at gmail.com (capacman) Date: Sun, 02 Apr 2006 23:54:08 -0000 Subject: [Bug 37784] sky2 ethernet driver is freezing References: <20060402235408.5441.13560.malonedeb@gangotri.ubuntu.com> Message-ID: <20060402235408.5441.13560.malonedeb@gangotri.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 linux-image-2.6.15-19-686 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: sky2 ethernet driver is freezing whenever i want to upload some data bigger than say 300kb (so make it unusable with samba ftp...). Error is reproducible. After upload i could not do any thing with eth0 interface even pinging. After ifdown and ifup on eth0 again eth0 can be made functionale. I think this bug is already reported but still not fixed in dapper drake. Also I read in some forums ,it caused by old sky2 version.The version in linux-image-2.6.15-19-686(also in 386 i could not check other images )is 0.11,but current version is i think 1.1 and the bug related to this is already fixed. In the meantime, there is some other bug reports about sky2 which is probably related to this bug. So please someone mark this bug as confirmed and mark other bugs as duplicates. -- sky2 ethernet driver is freezing https://launchpad.net/malone/bugs/37784 From seth at ubuntu.com Mon Apr 3 02:48:26 2006 From: seth at ubuntu.com (Seth Kinast) Date: Mon, 03 Apr 2006 02:48:26 -0000 Subject: [Bug 37575] Re: bcm43 errors & no wifi with rate=54M References: <20060401111406.23707.88085.malonedeb@gandwana.ubuntu.com> Message-ID: <20060403024826.23733.11724.launchpad@gandwana.ubuntu.com> *** This bug is a duplicate of bug 36525 *** ** This bug has been marked a duplicate of bug 36525 bcm43xx Driver only works @ 11Mb/s -- bcm43 errors & no wifi with rate=54M https://launchpad.net/malone/bugs/37575 From seth at ubuntu.com Mon Apr 3 02:48:26 2006 From: seth at ubuntu.com (Seth Kinast) Date: Mon, 03 Apr 2006 02:48:26 -0000 Subject: [Bug 36525] Re: bcm43xx Driver only works @ 11Mb/s References: <20060325040432.6253.74364.malonedeb@gandwana.ubuntu.com> Message-ID: <20060403024826.23733.36234.launchpad@gandwana.ubuntu.com> ** Bug 37575 has been marked a duplicate of this bug -- bcm43xx Driver only works @ 11Mb/s https://launchpad.net/malone/bugs/36525 From ihatepickles at gmail.com Mon Apr 3 03:00:16 2006 From: ihatepickles at gmail.com (Steve Smith) Date: Mon, 03 Apr 2006 03:00:16 -0000 Subject: [Bug 35215] Re: ipw3945 driver required for functionality on new Intel PRO/Wireless 3945ABG Mini-PCI Express Adapters References: <20060316173707.11105.89035.malonedeb@gandwana.ubuntu.com> Message-ID: <20060403030017.23733.95863.malone@gandwana.ubuntu.com> I too would like inclusion of the driver into the next kernel build so it can be tested. The driver needs the ieee80211 subsystem to also be updated to >=1.1.11. I'm using ieee80211 1.1.12 with success along with the 0.0.73 driver manually installed. -- ipw3945 driver required for functionality on new Intel PRO/Wireless 3945ABG Mini-PCI Express Adapters https://launchpad.net/malone/bugs/35215 From zzking at free.fr Mon Apr 3 07:31:49 2006 From: zzking at free.fr (gerard) Date: Mon, 03 Apr 2006 07:31:49 -0000 Subject: [Bug 28833] Dapper 3: problem w/ USB devices References: <20060117223914.20195.11185.malonedeb@gandwana.ubuntu.com> Message-ID: <20060403073149.20962.30741.launchpad@canonical@gangotri.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: Hi everyone I've got the following strange thing w/ USB removable devices: Detected, read/ write - USB1 128M key But the following is not even detected: - USB2 256M key - USB2 20M HD For your info, all this is detected by Breezy Hope you can fix it, Thx in advance Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: Hi everyone I've got the following strange thing w/ USB removable devices: Detected, read/ write - USB1 128M key But the following is not even detected: - USB2 256M key - USB2 20M HD For your info, all this is detected by Breezy Hope you can fix it, Thx in advance -- Dapper 3: problem w/ USB devices https://launchpad.net/malone/bugs/28833 From samtygier at yahoo.co.uk Mon Apr 3 07:31:48 2006 From: samtygier at yahoo.co.uk (sam tygier) Date: Mon, 03 Apr 2006 07:31:48 -0000 Subject: [Bug 28833] Re: Dapper 3: problem w/ USB devices References: <20060117223914.20195.11185.malonedeb@gandwana.ubuntu.com> Message-ID: <20060403073149.20962.15560.launchpad@gangotri.ubuntu.com> ** Changed in: Ubuntu Sourcepackagename: None => linux-source-2.6.15 Status: Needs Info => Unconfirmed -- Dapper 3: problem w/ USB devices https://launchpad.net/malone/bugs/28833 From ubuntu at paul.sladen.org Mon Apr 3 08:43:41 2006 From: ubuntu at paul.sladen.org (Paul Sladen) Date: Mon, 03 Apr 2006 08:43:41 -0000 Subject: [Bug 37132] Re: Fan non-stop on after long suspend - MSI S260 References: <20060329082822.7863.46602.malonedeb@gangotri.ubuntu.com> Message-ID: <20060403084341.23707.40136.malone@gandwana.ubuntu.com> Hi Łukasz, Googling around for "msi s260 fan" suggests that lots of people are experiencing loud fans and that a BIOS update from: http://www.msi.com.tw/program/support/download/dld/spt_dld_detail.php?UID=607&kind=11 may be the solution. Does this work for you? -- Fan non-stop on after long suspend - MSI S260 https://launchpad.net/malone/bugs/37132 From serge.claus at free.fr Mon Apr 3 09:00:14 2006 From: serge.claus at free.fr (sergecl) Date: Mon, 03 Apr 2006 09:00:14 -0000 Subject: [Bug 34351] Re: Pinnacle PCTV Rave saa7134 References: <20060310194801.17018.83828.malonedeb@gangotri.ubuntu.com> Message-ID: <20060403090014.23733.18304.malone@gandwana.ubuntu.com> I have the same problem with a PCTV pro Card (bug: 29535). Works fine in Breezy, but not in Dapper. -- Pinnacle PCTV Rave saa7134 https://launchpad.net/malone/bugs/34351 From lukasz.halman at gmail.com Mon Apr 3 09:10:36 2006 From: lukasz.halman at gmail.com (=?utf-8?q?=C5=81ukasz_Halman?=) Date: Mon, 03 Apr 2006 09:10:36 -0000 Subject: [Bug 37132] Re: Fan non-stop on after long suspend - MSI S260 References: <20060329082822.7863.46602.malonedeb@gangotri.ubuntu.com> Message-ID: <20060403091036.20988.54352.malone@gangotri.ubuntu.com> I have the latest BIOS and don't have the issue you mentioned. My problem was that after notebook resumed from long sleep [several hours] the cpu fan was turning off at all. Temperature wasn't even near 40C, which is the default for this machine, and fan was blowing at full speed without turning off. I cannot provide any additional info, because at this moment if I let notebook sleep for a longer time, longer than few minutes that is, it won't wake up. :/ -- Fan non-stop on after long suspend - MSI S260 https://launchpad.net/malone/bugs/37132 From hellan at acm.org Mon Apr 3 09:55:37 2006 From: hellan at acm.org (=?utf-8?q?Jon_K=C3=A5re_Hellan?=) Date: Mon, 03 Apr 2006 09:55:37 -0000 Subject: [Bug 28984] Re: Kernel doesn't find root file system References: <20060119133204.16602.30528.malonedeb@gandwana.ubuntu.com> Message-ID: <20060403095538.23733.87053.malone@gandwana.ubuntu.com> I am the original bug reporter. I have no finally found out what the problem was: For a while, I experimented with the bootchart package from dapper. I uninstalled it a long time ago, but only recently discovered that it pulled in dapper's version of libklibc and klibc-utils. After downgrading those to breezy, the problem went away. Sorry for the inconvenience. -- Kernel doesn't find root file system https://launchpad.net/malone/bugs/28984 From ubuntu-de at e-monkey.ch Mon Apr 3 10:22:27 2006 From: ubuntu-de at e-monkey.ch (emonkey) Date: Mon, 03 Apr 2006 10:22:27 -0000 Subject: [Bug 33368] Re: X freeze the computer (Dapper - glcore) References: <20060302082234.17525.50004.malonedeb@gangotri.ubuntu.com> Message-ID: <20060403102227.20962.49759.malone@gangotri.ubuntu.com> Nice idea but it don't work for me and I think my problem is different. I've removed kdm and use the startx command to start X. -- X freeze the computer (Dapper - glcore) https://launchpad.net/malone/bugs/33368 From adconrad at 0c3.net Mon Apr 3 10:31:42 2006 From: adconrad at 0c3.net (Adam Conrad) Date: Mon, 03 Apr 2006 10:31:42 -0000 Subject: [Bug 28984] Re: Kernel doesn't find root file system References: <20060119133204.16602.30528.malonedeb@gandwana.ubuntu.com> Message-ID: <20060403103142.23707.31138.malone@gandwana.ubuntu.com> Rejecting, since using dapper's klibc and friends with breezy's initramfs-tools isn't really a supported configuration. ** Changed in: initramfs-tools (Ubuntu) Status: Unconfirmed => Rejected -- Kernel doesn't find root file system https://launchpad.net/malone/bugs/28984 From fred at ubuntu.com Mon Apr 3 10:39:20 2006 From: fred at ubuntu.com (FredStrauss) Date: Mon, 03 Apr 2006 10:39:20 -0000 Subject: [Bug 34161] Re: No nfs kernel support in mini.iso References: <20060309004352.28582.76396.malonedeb@gandwana.ubuntu.com> Message-ID: <20060403103920.20962.50101.malone@gangotri.ubuntu.com> I can confirm this bug. I'm doing installs for an LPI training lab and even in Dapper Flight 6 the nfs modules in not included in netboot's initrd -- No nfs kernel support in mini.iso https://launchpad.net/malone/bugs/34161 From ubuntu at paul.sladen.org Mon Apr 3 10:46:58 2006 From: ubuntu at paul.sladen.org (Paul Sladen) Date: Mon, 03 Apr 2006 10:46:58 -0000 Subject: [Bug 37132] Re: Fan non-stop on after long suspend - MSI S260 References: <20060329082822.7863.46602.malonedeb@gangotri.ubuntu.com> Message-ID: <20060403104658.23707.46485.malone@gandwana.ubuntu.com> So at the moment, the non-stop fan doesn't actually occur, because it is not possible to unsuspend? -- Fan non-stop on after long suspend - MSI S260 https://launchpad.net/malone/bugs/37132 From mjg59 at codon.org.uk Mon Apr 3 13:31:03 2006 From: mjg59 at codon.org.uk (Matthew Garrett) Date: Mon, 03 Apr 2006 13:31:03 -0000 Subject: [Bug 36983] Re: Acer Travelmate 8103 needs "noapic" to boot installer References: <20060328105503.6279.36895.malonedeb@gandwana.ubuntu.com> Message-ID: <20060403133104.25863.57923.malone@gangotri.ubuntu.com> Should be fixed in git - the next kernel upload ought to fix this. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Needs Info => Fix Committed -- Acer Travelmate 8103 needs "noapic" to boot installer https://launchpad.net/malone/bugs/36983 From jjesse at iserv.net Mon Apr 3 13:31:53 2006 From: jjesse at iserv.net (Jonathan Jesse) Date: Mon, 03 Apr 2006 13:31:53 -0000 Subject: [Bug 18691] Re: Computer gets hotter if no USB port is used. References: <20060113135741.21012.41956.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060403133153.23082.74842.malone@gandwana.ubuntu.com> Have you had a chance to upgrade to Kubuntu 6.06? I have not had any problems with using USB devices, whether hard drives or mice with any version of Kubuntu. Have any updates fixed the problem? -- Computer gets hotter if no USB port is used. https://launchpad.net/malone/bugs/18691 From vyruss at freemail.gr Mon Apr 3 14:34:10 2006 From: vyruss at freemail.gr (Jimmy Angelakos) Date: Mon, 03 Apr 2006 14:34:10 -0000 Subject: [Bug 37876] Kernel does not read DVDs, no automount References: <20060403143410.25863.56627.malonedeb@gangotri.ubuntu.com> Message-ID: <20060403143410.25863.56627.malonedeb@gangotri.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: CDs are automounted normally and an icon appears on the desktop. This is not the case with DVDs, my drive's light flashes on and off for many seconds, then after it stops the DVD is not mounted. -- Kernel does not read DVDs, no automount https://launchpad.net/malone/bugs/37876 From vyruss at freemail.gr Mon Apr 3 14:35:56 2006 From: vyruss at freemail.gr (Jimmy Angelakos) Date: Mon, 03 Apr 2006 14:35:56 -0000 Subject: [Bug 37876] Re: Kernel does not read DVDs, no automount References: <20060403143410.25863.56627.malonedeb@gangotri.ubuntu.com> Message-ID: <20060403143556.25863.3692.malone@gangotri.ubuntu.com> When I insert a DVD, dmesg looks like this: [4317221.619000] attempt to access beyond end of device [4317221.619000] hdc: rw=0, want=68, limit=4 [4317221.623000] attempt to access beyond end of device [4317221.623000] hdc: rw=0, want=1252, limit=4 [4317221.624000] attempt to access beyond end of device [4317221.624000] hdc: rw=0, want=1028, limit=4 [4317221.624000] UDF-fs: No partition found (1) [4317221.652000] attempt to access beyond end of device [4317221.652000] hdc: rw=0, want=68, limit=4 [4317221.656000] attempt to access beyond end of device [4317221.656000] hdc: rw=0, want=1252, limit=4 [4317221.656000] attempt to access beyond end of device [4317221.656000] hdc: rw=0, want=1028, limit=4 [4317221.656000] UDF-fs: No partition found (1) [4317221.815000] attempt to access beyond end of device [4317221.815000] hdc: rw=0, want=68, limit=4 [4317221.815000] isofs_fill_super: bread failed, dev=hdc, iso_blknum=16, block=16 [4317221.843000] attempt to access beyond end of device [4317221.844000] hdc: rw=0, want=68, limit=4 [4317221.844000] isofs_fill_super: bread failed, dev=hdc, iso_blknum=16, block=16 [4317221.871000] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! [4317221.871000] FAT: bogus number of reserved sectors [4317221.871000] VFS: Can't find a valid FAT filesystem on dev hdc. [4317221.898000] FAT: bogus number of reserved sectors [4317221.898000] VFS: Can't find a valid FAT filesystem on dev hdc. [4317221.935000] NTFS-fs warning (device hdc): parse_options(): Option iocharset is deprecated. Please use option nls= in the future. [4317221.935000] NTFS-fs error (device hdc): ntfs_fill_super(): Device has unsupported hardsect_size. [4317221.964000] NTFS-fs error (device hdc): ntfs_fill_super(): Device has unsupported hardsect_size. [4317222.042000] HFS+-fs: unable to find HFS+ superblock [4317222.072000] HFS+-fs: unable to find HFS+ superblock [4317222.147000] VFS: Can't find a HFS filesystem on dev hdc. [4317222.176000] VFS: Can't find a HFS filesystem on dev hdc. [4317222.208000] VFS: Can't find ext3 filesystem on dev hdc. [4317222.238000] VFS: Can't find ext3 filesystem on dev hdc. [4317222.307000] VFS: Can't find an ext2 filesystem on dev hdc. [4317222.336000] VFS: Can't find an ext2 filesystem on dev hdc. [4317222.439000] attempt to access beyond end of device [4317222.439000] hdc: rw=0, want=20, limit=4 [4317222.439000] ReiserFS: hdc: warning: sh-2006: read_super_block: bread failed (dev hdc, block 4, size 2048) [4317222.439000] attempt to access beyond end of device [4317222.439000] hdc: rw=0, want=132, limit=4 [4317222.439000] ReiserFS: hdc: warning: sh-2006: read_super_block: bread failed (dev hdc, block 32, size 2048) [4317222.439000] ReiserFS: hdc: warning: sh-2021: reiserfs_fill_super: can not find reiserfs on hdc [4317222.467000] attempt to access beyond end of device [4317222.468000] hdc: rw=0, want=20, limit=4 [4317222.468000] ReiserFS: hdc: warning: sh-2006: read_super_block: bread failed (dev hdc, block 4, size 2048) [4317222.468000] attempt to access beyond end of device [4317222.468000] hdc: rw=0, want=132, limit=4 [4317222.468000] ReiserFS: hdc: warning: sh-2006: read_super_block: bread failed (dev hdc, block 32, size 2048) [4317222.468000] ReiserFS: hdc: warning: sh-2021: reiserfs_fill_super: can not find reiserfs on hdc [4317222.641000] SGI XFS with ACLs, security attributes, realtime, large block numbers, no debug enabled [4317222.641000] SGI XFS Quota Management subsystem [4317222.669000] attempt to access beyond end of device [4317222.669000] hdc: rw=0, want=8, limit=4 [4317222.669000] XFS: SB read failed [4317222.696000] attempt to access beyond end of device [4317222.697000] hdc: rw=0, want=8, limit=4 [4317222.697000] XFS: SB read failed [4317222.759000] JFS: nTxBlock = 8083, nTxLock = 64666 [4317222.813000] attempt to access beyond end of device [4317222.813000] hdc: rw=0, want=72, limit=4 [4317222.813000] attempt to access beyond end of device [4317222.813000] hdc: rw=0, want=128, limit=4 [4317222.848000] attempt to access beyond end of device [4317222.848000] hdc: rw=0, want=72, limit=4 [4317222.848000] attempt to access beyond end of device [4317222.848000] hdc: rw=0, want=128, limit=4 -- Kernel does not read DVDs, no automount https://launchpad.net/malone/bugs/37876 From vyruss at freemail.gr Mon Apr 3 14:47:10 2006 From: vyruss at freemail.gr (Jimmy Angelakos) Date: Mon, 03 Apr 2006 14:47:10 -0000 Subject: [Bug 37876] Re: Kernel does not read DVDs, no automount References: <20060403143410.25863.56627.malonedeb@gangotri.ubuntu.com> Message-ID: <20060403144710.23108.54738.malone@gandwana.ubuntu.com> The DVD I used for this attempt was a data DVD burned with K3B with Rock Ridge and Joliet extensions enabled. Options were: Allow 31 character ISO9660 filenames, ISO Level 2. I believe these are K3B's defaults. IMPORTANT: This does not happen with commercial video DVDs (UDF): [4317714.417000] UDF-fs INFO UDF 0.9.8.1 (2004/29/09) Mounting volume 'BlackAdder', timestamp 2036/02/07 04:58 (10b4) -- Kernel does not read DVDs, no automount https://launchpad.net/malone/bugs/37876 From jon at kapla.se Mon Apr 3 14:51:03 2006 From: jon at kapla.se (Jon Kapla) Date: Mon, 03 Apr 2006 14:51:03 -0000 Subject: [Bug 30963] Re: [dapper] snd_powermac does not recognize sound card References: <20060209122327.25235.98036.malonedeb@gangotri.ubuntu.com> Message-ID: <20060403145103.25836.36612.malone@gangotri.ubuntu.com> To check if you're right, I reinstalled with flight 6. But the bug is still present... -- [dapper] snd_powermac does not recognize sound card https://launchpad.net/malone/bugs/30963 From dn at offspringnet.net Mon Apr 3 15:09:36 2006 From: dn at offspringnet.net (grendel970) Date: Mon, 03 Apr 2006 15:09:36 -0000 Subject: [Bug 37881] Parallel port printer not working References: <20060403150937.23108.72392.malonedeb@gandwana.ubuntu.com> Message-ID: <20060403150937.23108.72392.malonedeb@gandwana.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 linux-image-2.6.15-19-386 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: I have an HP Deskjet 722c connected via parallel port which does not work. The system recognizes it and attaches lp0. I have applied the / to - change from bug #32085, cups seems to behave better and it looks like the jobs complete successfully, but the printer still does not work. I have tried: 1. installing ppd file for this printer from linuxprinting.org (after changing / to - in *NickName*) 2. chmod 666 on /dev/lp0, not a permissions problem 3. turned debugging on in cups 4. Tried many different bios changes, ECP mode, irq 7 reserved and not reserved, PNP off and on,, etc, the printer is always recognized through these changes, but no go. Even resetting bios to defaults which is 0x378/SPP/irq7 does not work. 5. dpkg-reconfigure cupsys Unfortunately I cannot echo anything raw to the printer. I know the parallel port and printer work fine as I can boot into my other distro (FC3) and bing, it works. I did not try the printer in breezy, I just installed and did an upgrade to dapper, but from the bootup in the breezy kernel I did get the "PnPBIOS parallel port detected..." message, which I have not receieved since going to the 2.6.15 dapper kernel. -- Parallel port printer not working https://launchpad.net/malone/bugs/37881 From avilella at gmail.com Mon Apr 3 15:19:24 2006 From: avilella at gmail.com (Albert Vilella) Date: Mon, 03 Apr 2006 15:19:24 -0000 Subject: [Bug 37784] Re: sky2 ethernet driver is freezing References: <20060402235408.5441.13560.malonedeb@gangotri.ubuntu.com> Message-ID: <20060403151924.23108.60349.malone@gandwana.ubuntu.com> this is also happening to me. Only ocassionally. Bug #37164 -- sky2 ethernet driver is freezing https://launchpad.net/malone/bugs/37784 From michael.prior at gmail.com Mon Apr 3 15:16:13 2006 From: michael.prior at gmail.com (telepathetic) Date: Mon, 03 Apr 2006 15:16:13 -0000 Subject: [Bug 35993] Re: hang on an IBM NetVista PC References: <20060322114239.4578.60173.malonedeb@gandwana.ubuntu.com> Message-ID: <20060403151613.23082.64763.malone@gandwana.ubuntu.com> i've finally found someone else who has felt my pain!! If you ever figure this out please please please post it to the forum link below. I have EXACTLY the same problem and also have a NetVista. I've had the problem on Breezy as well as the latest Dapper. Here's a link to the thread i've got going on the ubuntu forums-- still no fix in sight yet :( http://ubuntuforums.org/showthread.php?t=152371&highlight=telepathetic -- hang on an IBM NetVista PC https://launchpad.net/malone/bugs/35993 From avilella at gmail.com Mon Apr 3 15:22:41 2006 From: avilella at gmail.com (Albert Vilella) Date: Mon, 03 Apr 2006 15:22:41 -0000 Subject: [Bug 37496] Re: Critical temperature reached (255 C) when using i810 References: <20060331161934.23707.1672.malonedeb@gandwana.ubuntu.com> Message-ID: <20060403152241.25863.19456.malone@gangotri.ubuntu.com> *** This bug is a duplicate of bug 37884 *** this may be better reported in acpi. Marked as duplicate. ** This bug has been marked a duplicate of bug 37884 Critical temperature reached (255 C) very soon at boot when using i810 -- Critical temperature reached (255 C) when using i810 https://launchpad.net/malone/bugs/37496 From jerome.lacoste at gmail.com Mon Apr 3 15:41:23 2006 From: jerome.lacoste at gmail.com (Jerome Lacoste) Date: Mon, 03 Apr 2006 15:41:23 -0000 Subject: [Bug 35993] Re: [Bug 35993] Re: hang on an IBM NetVista PC References: <20060322114239.4578.60173.malonedeb@gandwana.ubuntu.com> <20060403151613.23082.64763.malone@gandwana.ubuntu.com> Message-ID: <5a2cf1f60604030841j34861951iddfa1cdd1dd0b435@mail.gmail.com> On 4/3/06, telepathetic wrote: > i've finally found someone else who has felt my pain!! If you ever figure this out please please please post it to the forum link below. I have EXACTLY the same problem and also have a NetVista. I've had the problem on Breezy as well as the latest Dapper. Here's a link to the thread i've got going on the ubuntu forums-- still no fix in sight yet :( > http://ubuntuforums.org/showthread.php?t=152371&highlight=telepathetic Haven't started investigating it but I will have to fix it within the week. Some of the things I am going to try: - connect to the box using ssh after or before touching the keyboard (is it still responsive?) - change power management options - compile my own kernel (i.e. without any ubuntu patches) Jerome -- hang on an IBM NetVista PC https://launchpad.net/malone/bugs/35993 From rob.gilbert at yahoo.ca Mon Apr 3 15:53:44 2006 From: rob.gilbert at yahoo.ca (RGilbert) Date: Mon, 03 Apr 2006 15:53:44 -0000 Subject: [Bug 29254] Parallel port scanners are not autodetected References: <20060121030711.28441.62841.malonedeb@gangotri.ubuntu.com> Message-ID: <20060403155344.25836.65274.launchpad@canonical@gangotri.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Minor Priority: (none set) Status: Confirmed Description: Usability issue. XSANE cannot find scanner on parallel port for default user. XSANE recognizes parallel port scanner when called using sudo. scanner should be detected and xscan should execute for default user without the need to change user permissions. Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Minor Priority: (none set) Status: Confirmed Description: Usability issue. XSANE cannot find scanner on parallel port for default user. XSANE recognizes parallel port scanner when called using sudo. scanner should be detected and xscan should execute for default user without the need to change user permissions. -- Parallel port scanners are not autodetected https://launchpad.net/malone/bugs/29254 From schirrer at gmail.com Mon Apr 3 15:54:43 2006 From: schirrer at gmail.com (Nicolas Schirrer) Date: Mon, 03 Apr 2006 15:54:43 -0000 Subject: [Bug 35301] Re: ueagle-atm driver does not work References: <20060317103454.6537.10258.malonedeb@gangotri.ubuntu.com> Message-ID: <20060403155443.23108.911.malone@gandwana.ubuntu.com> @Arthemis : Could you please post an explanation on how you got ueagle-usb working on dapper ? Kind of a tutorial if you can. Thanks -- ueagle-atm driver does not work https://launchpad.net/malone/bugs/35301 From metatux at gmx.net Mon Apr 3 16:03:36 2006 From: metatux at gmx.net (Markus Ehrlich) Date: Mon, 03 Apr 2006 16:03:36 -0000 Subject: [Bug 37883] EVO N610c does not wake up again References: <20060403151835.23108.4584.malonedeb@gandwana.ubuntu.com> Message-ID: <20060403160336.25863.27929.launchpad@canonical@gangotri.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: In Progress Description: After going into suspend same as hibernation the laptop does not wake up again. Waking up from suspend causes: ---------- [4351904.26500] Stopping tasks: =============================== =============================================================== ========================| [4351904.26500] Freeing memory ... done [4351929.39800] GTM info 78,14,78,3c,1f [4351940.69100] GTM info 78,14,78,3c,1f [4351941.25700] ACPI: PCI interrupt for device 0000:06:05:8 disabled [4351941.25800] ACPI: PCI interrupt for device 0000:00:1b:0 disabled [4351941.25800] resume = option should be used to set suspend device ................................. ..... swsup: need to copy 53645 pages and there is no more way than a hard-reboot. Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: In Progress Description: After going into suspend same as hibernation the laptop does not wake up again. Waking up from suspend causes: ---------- [4351904.26500] Stopping tasks: =============================== =============================================================== ========================| [4351904.26500] Freeing memory ... done [4351929.39800] GTM info 78,14,78,3c,1f [4351940.69100] GTM info 78,14,78,3c,1f [4351941.25700] ACPI: PCI interrupt for device 0000:06:05:8 disabled [4351941.25800] ACPI: PCI interrupt for device 0000:00:1b:0 disabled [4351941.25800] resume = option should be used to set suspend device ................................. ..... swsup: need to copy 53645 pages and there is no more way than a hard-reboot. -- EVO N610c does not wake up again https://launchpad.net/malone/bugs/37883 From avilella at gmail.com Mon Apr 3 16:03:56 2006 From: avilella at gmail.com (Albert Vilella) Date: Mon, 03 Apr 2006 16:03:56 -0000 Subject: [Bug 37884] Critical temperature reached (255 C) very soon at boot when using i810 References: <20060403152126.23108.73899.malonedeb@gandwana.ubuntu.com> Message-ID: <20060403160356.25863.1748.launchpad@canonical@gangotri.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: Hi, This is a problem I have with a Sony Vaio SZ1XP. This computer has two graphic cards, one i945GM and an NVIDIA GeForce Go 7400. There is a switch close to the power button that will allow the user to use the NVIDIA chip (Speed) or the Intel chip (Stamina) depending on if one wants good graphic performance or better battery life. When I try to load the kernel with the Intel chip, as soon as it loads the essential modules, an acpi warning appears stating: [bignumber.bignumber] Critical temperature reached (255 C) And the laptop will do a controlled halt. Somehow it seems that when using the Intel chip, the bios/acpi is giving unrealistic thermal info, which won't let the kernel to load. Typical: pci=noacpi or acpi=off or noapic flags don't help at all. Any hints? Albert. Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: Hi, This is a problem I have with a Sony Vaio SZ1XP. This computer has two graphic cards, one i945GM and an NVIDIA GeForce Go 7400. There is a switch close to the power button that will allow the user to use the NVIDIA chip (Speed) or the Intel chip (Stamina) depending on if one wants good graphic performance or better battery life. When I try to load the kernel with the Intel chip, as soon as it loads the essential modules, an acpi warning appears stating: [bignumber.bignumber] Critical temperature reached (255 C) And the laptop will do a controlled halt. Somehow it seems that when using the Intel chip, the bios/acpi is giving unrealistic thermal info, which won't let the kernel to load. Typical: pci=noacpi or acpi=off or noapic flags don't help at all. Any hints? Albert. -- Critical temperature reached (255 C) very soon at boot when using i810 https://launchpad.net/malone/bugs/37884 From scott at ubuntu.com Mon Apr 3 15:59:37 2006 From: scott at ubuntu.com (Scott James Remnant) Date: Mon, 03 Apr 2006 15:59:37 -0000 Subject: [Bug 37500] Re: parpart modules loaded, but parprt devices are not created References: <20060331170455.23707.34651.malonedeb@gandwana.ubuntu.com> Message-ID: <20060403155937.23082.71053.launchpad@gandwana.ubuntu.com> *** This bug is a duplicate of bug 29254 *** ** This bug has been marked a duplicate of bug 29254 No uevents for parport devices when parport modules loaded -- parpart modules loaded, but parprt devices are not created https://launchpad.net/malone/bugs/37500 From scott at ubuntu.com Mon Apr 3 15:54:43 2006 From: scott at ubuntu.com (Scott James Remnant) Date: Mon, 03 Apr 2006 15:54:43 -0000 Subject: [Bug 29254] Re: Parallel port scanners are not autodetected References: <20060121030711.28441.62841.malonedeb@gangotri.ubuntu.com> Message-ID: <20060403155443.25836.9086.malone@gangotri.ubuntu.com> udevmonitor prints the received event from the kernel [UEVENT] and the event which udev sends out after rule processing [UDEV] UEVENT[1144079673.271567] add@/module/parport ACTION=add DEVPATH=/module/parport SUBSYSTEM=module SEQNUM=2600 UDEV [1144079673.272915] add@/module/parport UDEV_LOG=3 ACTION=add DEVPATH=/module/parport SUBSYSTEM=module SEQNUM=2600 UDEVD_EVENT=1 UEVENT[1144079675.194001] add@/module/parport_pc ACTION=add DEVPATH=/module/parport_pc SUBSYSTEM=module SEQNUM=2601 UEVENT[1144079675.194121] add@/bus/pnp/drivers/parport_pc ACTION=add DEVPATH=/bus/pnp/drivers/parport_pc SUBSYSTEM=drivers SEQNUM=2602 UDEV [1144079675.195067] add@/module/parport_pc UDEV_LOG=3 ACTION=add DEVPATH=/module/parport_pc SUBSYSTEM=module SEQNUM=2601 UDEVD_EVENT=1 UDEV [1144079675.195313] add@/bus/pnp/drivers/parport_pc UDEV_LOG=3 ACTION=add DEVPATH=/bus/pnp/drivers/parport_pc SUBSYSTEM=drivers SEQNUM=2602 UDEVD_EVENT=1 UEVENT[1144079675.400077] add@/bus/pci/drivers/parport_pc ACTION=add DEVPATH=/bus/pci/drivers/parport_pc SUBSYSTEM=drivers SEQNUM=2603 UDEV [1144079675.401065] add@/bus/pci/drivers/parport_pc UDEV_LOG=3 ACTION=add DEVPATH=/bus/pci/drivers/parport_pc SUBSYSTEM=drivers SEQNUM=2603 ** Changed in: udev (Ubuntu) Sourcepackagename: udev => linux-source-2.6.15 ** Summary changed: - Parallel port scanners are not autodetected + No uevents for parport devices when parport modules loaded ** Bug 37500 has been marked a duplicate of this bug -- No uevents for parport devices when parport modules loaded https://launchpad.net/malone/bugs/29254 From mjg59 at codon.org.uk Mon Apr 3 16:03:55 2006 From: mjg59 at codon.org.uk (Matthew Garrett) Date: Mon, 03 Apr 2006 16:03:55 -0000 Subject: [Bug 37884] Re: Critical temperature reached (255 C) very soon at boot when using i810 References: <20060403152126.23108.73899.malonedeb@gandwana.ubuntu.com> Message-ID: <20060403160356.25863.24793.launchpad@gangotri.ubuntu.com> ** Changed in: acpi (Ubuntu) Sourcepackagename: acpi => linux-source-2.6.15 -- Critical temperature reached (255 C) very soon at boot when using i810 https://launchpad.net/malone/bugs/37884 From mjg59 at codon.org.uk Mon Apr 3 16:03:25 2006 From: mjg59 at codon.org.uk (Matthew Garrett) Date: Mon, 03 Apr 2006 16:03:25 -0000 Subject: [Bug 37883] Re: EVO N610c does not wake up again References: <20060403151835.23108.4584.malonedeb@gandwana.ubuntu.com> Message-ID: <20060403160325.23082.51224.malone@gandwana.ubuntu.com> Should be fixed in the next kernel release. ** Changed in: acpi-support (Ubuntu) Status: Unconfirmed => In Progress ** Changed in: acpi-support (Ubuntu) Sourcepackagename: acpi-support => linux-source-2.6.15 Binarypackagename: acpi-support => None -- EVO N610c does not wake up again https://launchpad.net/malone/bugs/37883 From scott at ubuntu.com Mon Apr 3 16:02:48 2006 From: scott at ubuntu.com (Scott James Remnant) Date: Mon, 03 Apr 2006 16:02:48 -0000 Subject: [Bug 37434] Re: hotplug trouble with USB CD-ROM References: <20060331051019.5415.66332.malonedeb@gangotri.ubuntu.com> Message-ID: <20060403160248.25836.47542.malone@gangotri.ubuntu.com> I've assigned this to the kernel to deal with the "dead devices should fail faster" part here. I don't think there's a udev bug, because this is a design "feature" of the installer, so have assigned back to hw-detect. -- hotplug trouble with USB CD-ROM https://launchpad.net/malone/bugs/37434 From scott at ubuntu.com Mon Apr 3 16:01:44 2006 From: scott at ubuntu.com (Scott James Remnant) Date: Mon, 03 Apr 2006 16:01:44 -0000 Subject: [Bug 37434] Re: hotplug trouble with USB CD-ROM References: <20060331051019.5415.66332.malonedeb@gangotri.ubuntu.com> Message-ID: <20060403160144.25836.82884.malone@gangotri.ubuntu.com> The problem here is simply that the kernel didn't respond fast enough to the device being forcibly unplugged; and once it responded, and the device was plugged in, there's no rule to cause it to be remounted because the installer works on hw-detect cycles, rather than udev rules. ** Also affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed ** Changed in: udev (Ubuntu) Sourcepackagename: udev => hw-detect -- hotplug trouble with USB CD-ROM https://launchpad.net/malone/bugs/37434 From mdz at ubuntu.com Mon Apr 3 16:02:36 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Mon, 03 Apr 2006 16:02:36 -0000 Subject: [Bug 28375] Re: oops after CD/DVD drive I/O errors References: <20060113152210.29386.55638.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060403160236.23082.38951.launchpad@gandwana.ubuntu.com> ** Changed in: linux-meta linux-image-k7 (Ubuntu) Sourcepackagename: linux-meta => linux-source-2.6.15 Binarypackagename: linux-image-k7 => None Assignee: (unassigned) => Ben Collins -- oops after CD/DVD drive I/O errors https://launchpad.net/malone/bugs/28375 From scott at ubuntu.com Mon Apr 3 16:05:15 2006 From: scott at ubuntu.com (Scott James Remnant) Date: Mon, 03 Apr 2006 16:05:15 -0000 Subject: [Bug 36955] Re: /dev/net/tun has no user permissions References: <20060328052518.20514.82849.malonedeb@gangotri.ubuntu.com> Message-ID: <20060403160515.25836.36102.malone@gangotri.ubuntu.com> It's up to the system administrator to device on the permissions of this device; you can adjust it quite simply by adding a file named /etc/udev/rules.d/45-tunnel.rules with the following contents: KERNEL=="tun", GROUP="plugdev", MODE="0660" Or whatever custom group and permissions you wish to assign to it. By default we only ship it as root r/w because of the sensitive nature of this device in ordinary circumstances. ** Changed in: udev linux-source-2.6.15 (Ubuntu) Binarypackagename: linux-source-2.6.15 => None Assignee: (unassigned) => Scott James Remnant Status: Unconfirmed => Rejected -- /dev/net/tun has no user permissions https://launchpad.net/malone/bugs/36955 From scott at ubuntu.com Mon Apr 3 16:13:57 2006 From: scott at ubuntu.com (Scott James Remnant) Date: Mon, 03 Apr 2006 16:13:57 -0000 Subject: [Bug 29789] Re: tv card audio not working References: <20060126170552.26274.32755.malonedeb@gangotri.ubuntu.com> Message-ID: <20060403161357.23082.31823.malone@gandwana.ubuntu.com> The easiest "quick fix" for this is to do the following: echo bt878 > /etc/modprobe.d/blacklist-bt878 echo bt878 >> /etc/modules This blacklists bt878 (and thus bttv, which is what breaks snd_bt87x) from being automatically loaded for the device, leaving only snd_bt87x loaded; and then causes bt878 to be loaded manually later in the boot sequence, thus forcing the load order. This is a "hack" though, the correct fix is to stop bttv from breaking snd_bt87x in the first place and allow them to be loaded in any order. -- tv card audio not working https://launchpad.net/malone/bugs/29789 From frederic.paugam at laposte.net Mon Apr 3 16:16:15 2006 From: frederic.paugam at laposte.net (arthemis) Date: Mon, 03 Apr 2006 16:16:15 -0000 Subject: [Bug 35301] Howto make this driver work References: <20060317103454.6537.10258.malonedeb@gangotri.ubuntu.com> Message-ID: <20060403161615.23108.23184.malone@gandwana.ubuntu.com> Take a look at the following link http://lea-linux.org/pho/read/4/285053 where the right links (those that allowed me to make this driver work) can be found. The main point is that one must install the ueagle-atm and usbatm files from svn repository of ueagle-atm page in order to have the most recent version. -- ueagle-atm driver does not work https://launchpad.net/malone/bugs/35301 From michael.prior at gmail.com Mon Apr 3 16:21:33 2006 From: michael.prior at gmail.com (telepathetic) Date: Mon, 03 Apr 2006 16:21:33 -0000 Subject: [Bug 35993] Re: hang on an IBM NetVista PC References: <20060322114239.4578.60173.malonedeb@gandwana.ubuntu.com> Message-ID: <20060403162133.23108.84853.malone@gandwana.ubuntu.com> oooh!!-- just found this: http://ubuntuforums.org/showthread.php?t=47330&highlight=netvista hopefully this will fix yours and my problems -- hang on an IBM NetVista PC https://launchpad.net/malone/bugs/35993 From ubuntu-de at e-monkey.ch Mon Apr 3 16:21:45 2006 From: ubuntu-de at e-monkey.ch (emonkey) Date: Mon, 03 Apr 2006 16:21:45 -0000 Subject: [Bug 33368] Re: X freeze the computer (Dapper - glcore) References: <20060302082234.17525.50004.malonedeb@gangotri.ubuntu.com> Message-ID: <20060403162145.23082.7299.malone@gandwana.ubuntu.com> Till some update the computer don't freeze anymore, only the screen becomes black. Remote login with SSH still works and it seems like I still can use the local shell but without any output on the screen. If I comment out "load GLcore" in Section Module, the computer freeze immediately after the startx command. Here is the /var/log/Xorg.0.log: http://www.kubuntu.de/forum/forum.php?req=thread&download=15791&inline=1&key=21BED1E4 Knoppix 4.0.2 DVD with pci=noacpi acpi=off and kernel 2.6.12 works fine. Ubuntu with 2.6.12 don't work so I think there's a problem with xorg7. I'm not a specialist, my speculations really could be wrong. Keep on the good work and thanks for your effort! -- X freeze the computer (Dapper - glcore) https://launchpad.net/malone/bugs/33368 From jhaukkala at yahoo.com Mon Apr 3 16:32:23 2006 From: jhaukkala at yahoo.com (Jaakko Haukkala) Date: Mon, 03 Apr 2006 16:32:23 -0000 Subject: [Bug 28406] Acer 1362LC suspend to ram doesn't wake up References: <20060113152219.29386.83071.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060403163223.25863.74662.launchpad@canonical@gangotri.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: Medium Status: Needs Info Description: I have Acer 1362LC laptop with pcmcia wlan card from ralink. If I suspend it, it will go to sleep nicely. But when I try to wake it up, it just starts hard drive and fan, but nothing else happens. It is totally locked up and only thing I can do is to shut it down with power button. The led that indicates that the computer is in sleep mode is still on. It makes no difference if I eject wlan card and try to suspend without it. Software spec: Breezy with 2.6.12.10 kernel Hardware spec: AMD mobile sempron 512 MB via chipset (K8N800) Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: Medium Status: Needs Info Description: I have Acer 1362LC laptop with pcmcia wlan card from ralink. If I suspend it, it will go to sleep nicely. But when I try to wake it up, it just starts hard drive and fan, but nothing else happens. It is totally locked up and only thing I can do is to shut it down with power button. The led that indicates that the computer is in sleep mode is still on. It makes no difference if I eject wlan card and try to suspend without it. Software spec: Breezy with 2.6.12.10 kernel Hardware spec: AMD mobile sempron 512 MB via chipset (K8N800) -- Acer 1362LC suspend to ram doesn't wake up https://launchpad.net/malone/bugs/28406 From frederic.paugam at laposte.net Mon Apr 3 16:32:57 2006 From: frederic.paugam at laposte.net (arthemis) Date: Mon, 03 Apr 2006 16:32:57 -0000 Subject: [Bug 35301] A first small howto on this problem: please improve it References: <20060317103454.6537.10258.malonedeb@gangotri.ubuntu.com> Message-ID: <20060403163257.23082.21026.malone@gandwana.ubuntu.com> http://doc.ubuntu-fr.org//materiel/ueagle-atm -- ueagle-atm driver does not work https://launchpad.net/malone/bugs/35301 From mdz at ubuntu.com Mon Apr 3 16:32:23 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Mon, 03 Apr 2006 16:32:23 -0000 Subject: [Bug 28406] Re: Acer 1362LC suspend to ram doesn't wake up References: <20060113152219.29386.83071.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060403163223.25863.59341.malone@gangotri.ubuntu.com> Can you test with Dapper Flight 6 and see if this bug is still present? ** Changed in: acpi (Ubuntu) Sourcepackagename: acpi => linux-source-2.6.15 Binarypackagename: acpi => None Status: Unconfirmed => Needs Info -- Acer 1362LC suspend to ram doesn't wake up https://launchpad.net/malone/bugs/28406 From metatux at gmx.net Mon Apr 3 16:38:05 2006 From: metatux at gmx.net (Markus Ehrlich) Date: Mon, 03 Apr 2006 16:38:05 -0000 Subject: [Bug 37883] Re: [Bug 37883] Re: EVO N610c does not wake up again References: <20060403151835.23108.4584.malonedeb@gandwana.ubuntu.com> <20060403160325.23082.51224.malone@gandwana.ubuntu.com> Message-ID: <44314F6D.9050004@gmx.net> Hi Matthew, Matthew Garrett wrote: > Should be fixed in the next kernel release. wow. that would be nice. > ** Changed in: acpi-support (Ubuntu) > Status: Unconfirmed => In Progress > > ** Changed in: acpi-support (Ubuntu) > Sourcepackagename: acpi-support => linux-source-2.6.15 > Binarypackagename: acpi-support => None ok thanks. Greetings, Markus -- Registered GNU/Linux user 392004|Machine number 292924 irc.freenode.net: #linux-plug,#linuxperu,#flisol-peru,#linux.mx, #debian-peru,#debian-co,#ubuntu-pe,#ubuntu-de,#ubuntu-co,#apesol http://www.netmeister.org/news/learn2quote.html http://www.sindominio.net/ayuda/preguntas-inteligentes.html -- EVO N610c does not wake up again https://launchpad.net/malone/bugs/37883 From iwj at ubuntu.com Mon Apr 3 16:56:25 2006 From: iwj at ubuntu.com (Ian Jackson) Date: Mon, 03 Apr 2006 16:56:25 -0000 Subject: [Bug 36849] Re: [Bug 36849] Re: initrd creation error ignored => unbootable system References: <20060327135223.6279.11012.malonedeb@gandwana.ubuntu.com> <20060331114231.23733.77194.malone@gandwana.ubuntu.com> Message-ID: <17457.21433.43263.298508@davenant.relativity.greenend.org.uk> Colin Watson writes ("[Bug 36849] Re: initrd creation error ignored => unbootable system"): > Adam and I think that the disappearance of /lib/modules/2.6.12-9-386 > here must be a dpkg bug, since those files are shipped by > linux-image-2.6.12-9-386.deb. Ian, is there any ENOSPC circumstance > under which dpkg might get confused enough to delete those files? > Sascha, could you please post the result of 'dpkg -L > linux-image-2.6.12-9-386' and 'df'? Was linux-image-2.6.12-9-386 still installed ? I would be surprised if dpkg managed to delete files under these kind of conditions - it's normally pretty careful. Do the maintainer scripts mess with these files ? Would you like me to take a look at the relevant .debs ? Ian. -- initrd creation error ignored => unbootable system https://launchpad.net/malone/bugs/36849 From level at ventosus.ubuntuserver.be Mon Apr 3 16:59:14 2006 From: level at ventosus.ubuntuserver.be (Opaschi Octav) Date: Mon, 03 Apr 2006 16:59:14 -0000 Subject: [Bug 31527] Re: DRI locks up the machine when starting X on a Radeon 9250 References: <20060215163856.15884.24165.malonedeb@gangotri.ubuntu.com> Message-ID: <20060403165914.23108.938.malone@gandwana.ubuntu.com> Usually this ATI card has a lot of problems with Ubuntu. Xgl does not work corectly and I can get rendering only with fglrx proprietary ati drivers... I think it's ATI who produces bad low end cards. -- DRI locks up the machine when starting X on a Radeon 9250 https://launchpad.net/malone/bugs/31527 From umarmung at planet.ms Mon Apr 3 17:23:40 2006 From: umarmung at planet.ms (Holger Bauer) Date: Mon, 03 Apr 2006 17:23:40 -0000 Subject: [Bug 33161] Re: PnPACPI errors on boot and no /dev/fd0 References: <20060228154107.17498.36793.malonedeb@gangotri.ubuntu.com> Message-ID: <20060403172341.25863.14227.malone@gangotri.ubuntu.com> /dev/fd0 ist still missing in 2.6.15-19.29. However the pnp errors don't show up in dmesg anymore. ** Changed in: linux-source-2.6.15 linux-image-2.6.15-16-386 (Ubuntu) Status: Unconfirmed => Confirmed -- PnPACPI errors on boot and no /dev/fd0 https://launchpad.net/malone/bugs/33161 From tsml at szczepanek.de Mon Apr 3 18:25:38 2006 From: tsml at szczepanek.de (cygnus) Date: Mon, 03 Apr 2006 18:25:38 -0000 Subject: [Bug 32334] Re: Doesn't work correctly with xorg's Xinerama. References: <20060221173747.23543.11263.malonedeb@gandwana.ubuntu.com> Message-ID: <20060403182538.23082.9119.malone@gandwana.ubuntu.com> I have the same problem using two ATI X300 cards on a SLI mainboard. Running with just one card and one display works fine without problems. Adding the second head using the working breezy xorg.conf or using the dapper flight 6 xorg.conf and adding the second screen results in a complete system hang. I am using the ati driver. Tested on x86 and amd64 dapper flight 6. AFAIR dapper flight 4 worked fine. -- Doesn't work correctly with xorg's Xinerama. https://launchpad.net/malone/bugs/32334 From phibxr at gmail.com Mon Apr 3 18:46:29 2006 From: phibxr at gmail.com (phibxr) Date: Mon, 03 Apr 2006 18:46:29 -0000 Subject: [Bug 34508] Re: 2.6.15 kernel fails to boot on ppc machine References: <20060311210305.30082.75520.malonedeb@gandwana.ubuntu.com> Message-ID: <20060403184629.25836.17514.malone@gangotri.ubuntu.com> I left Dapper Flight 6 install CD on for about half an hour today, and it still freezes at the Ramdisk line. Although, my mouse flashes shortly afterwards, so I guess it is loading in modules and then freezes. Maybe a module that is loaded causes this? I have unplugged every unpluggable piece of hardware, so it should be some hardware built into this generation of iMacs thet. -- 2.6.15 kernel fails to boot on ppc machine https://launchpad.net/malone/bugs/34508 From jonesypeter at hotmail.com Mon Apr 3 19:35:50 2006 From: jonesypeter at hotmail.com (Peter) Date: Mon, 03 Apr 2006 19:35:50 -0000 Subject: [Bug 35635] Re: Halts on Boot after Installation References: <20060319201635.12254.13260.malonedeb@gandwana.ubuntu.com> Message-ID: <20060403193550.23082.52258.launchpad@gandwana.ubuntu.com> ** Description changed: - After installing Kubuntu or Ubuntu Flight 5 on my AMD1800XP with 512MB - RAM, Nvidia Graphics card and Nvidia Chipset, the boot starts with what - appears to be opening the kernal, the message 'boot' appears then the - system halts! Help. I can install and run 5.10 fine! + After installing Kubuntu or Ubuntu Flight 5 (Also just tried Flight 6!) + on my AMD1800XP with 512MB RAM, Nvidia Graphics card and Nvidia Chipset, + the boot starts with what appears to be opening the kernal, the message + 'boot' appears then the system halts! Help. I can install and run 5.10 + fine! -- Halts on Boot after Installation https://launchpad.net/malone/bugs/35635 From mdz at ubuntu.com Mon Apr 3 20:18:53 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Mon, 03 Apr 2006 20:18:53 -0000 Subject: [Bug 28833] Re: Dapper 3: problem w/ USB devices References: <20060117223914.20195.11185.malonedeb@gandwana.ubuntu.com> Message-ID: <20060403201853.23108.8748.launchpad@gandwana.ubuntu.com> ** Changed in: linux-source-2.6.15 (Ubuntu) Assignee: (unassigned) => Ben Collins -- Dapper 3: problem w/ USB devices https://launchpad.net/malone/bugs/28833 From mdz at ubuntu.com Mon Apr 3 20:22:09 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Mon, 03 Apr 2006 20:22:09 -0000 Subject: [Bug 28791] Re: With the new kernel my Powerbook G3 don't boot with bootx References: <20060117153955.20157.15011.malonedeb@gandwana.ubuntu.com> Message-ID: <20060403202209.25863.60651.launchpad@gangotri.ubuntu.com> ** Changed in: kernel-package (Ubuntu) Sourcepackagename: kernel-package => linux-source-2.6.15 Assignee: (unassigned) => Ben Collins -- With the new kernel my Powerbook G3 don't boot with bootx https://launchpad.net/malone/bugs/28791 From mdz at ubuntu.com Mon Apr 3 20:41:42 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Mon, 03 Apr 2006 20:41:42 -0000 Subject: [Bug 29211] Re: Plugging in power supply crashes laptop, using 2.6.12-10-686. References: <20060120173924.28395.75174.malonedeb@gangotri.ubuntu.com> Message-ID: <20060403204142.23082.60619.malone@gandwana.ubuntu.com> Looks like a kernel issue, not acpi-support ** Changed in: linux-source-2.6.12 (Ubuntu) Sourcepackagename: linux-source-2.6.12 => linux-source-2.6.15 ** Changed in: linux-source-2.6.15 (Ubuntu) Priority: Wontfix => Medium ** Changed in: acpi-support (Ubuntu) Status: Unconfirmed => Rejected -- Plugging in power supply crashes laptop, using 2.6.12-10-686. https://launchpad.net/malone/bugs/29211 From kleeman at cims.nyu.edu Mon Apr 3 21:02:50 2006 From: kleeman at cims.nyu.edu (Richard Kleeman) Date: Mon, 03 Apr 2006 21:02:50 -0000 Subject: [Bug 14394] Re: cdrecord/k3b/nautilus problem References: <20060113133632.21012.3776.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060403210250.25836.98702.malone@gangotri.ubuntu.com> I checked the 2.6.17-rc1 changes just released by Linus and I note the following: Hannes Reinecke: [SCSI] aic79xx: remove qfrozen [SCSI] aic79xx: use tcq functions [SCSI] aic79xx: Remove dead code [SCSI] aic79xx: Update error recovery [SCSI] aic79xx: Invalid Sequencer interrupt occured [SCSI] aic79xx: use BIOS settings [SCSI] aic79xx: Avoid renegotiation on inquiry Note that "qfrozen" and "Invalid Sequencer interrupt occured" are in the error messages I have listed above. I will try this kernel and see what happens. -- cdrecord/k3b/nautilus problem https://launchpad.net/malone/bugs/14394 From roland.lezuo at chello.at Mon Apr 3 21:09:30 2006 From: roland.lezuo at chello.at (iroli) Date: Mon, 03 Apr 2006 21:09:30 -0000 Subject: [Bug 35067] Re: powerbook freezes on wakeup (bcm43xx problem) References: <20060315162509.11079.58921.malonedeb@gandwana.ubuntu.com> Message-ID: <20060403210930.25836.17449.malone@gangotri.ubuntu.com> Same problem here, but i did not move it away from the access point. -- powerbook freezes on wakeup (bcm43xx problem) https://launchpad.net/malone/bugs/35067 From federico.sassi1 at studenti.unipr.it Mon Apr 3 21:32:06 2006 From: federico.sassi1 at studenti.unipr.it (Federico Sassi) Date: Mon, 03 Apr 2006 21:32:06 -0000 Subject: [Bug 25673] Re: Keyboard and touchpad doesn't work after suspend-to-ram on a Fujitsu-Siemens Amilo M1420 References: <20060113143457.21012.29014.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060403213206.25836.71963.malone@gangotri.ubuntu.com> Sorry, I've tested a little bit further. With fglrx the hibernation works ok just for few minutes... if I leave my system hibernated for a few hours then when I turn it on the screen is full of garbage... I haven't tested yet with open source driver... Federico -- Keyboard and touchpad doesn't work after suspend-to-ram on a Fujitsu-Siemens Amilo M1420 https://launchpad.net/malone/bugs/25673 From mdz at ubuntu.com Mon Apr 3 22:02:52 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Mon, 03 Apr 2006 22:02:52 -0000 Subject: [Bug 29420] Re: Strange clock behaviour on powerpc-smp References: <20060123071446.16602.91711.malonedeb@gandwana.ubuntu.com> Message-ID: <20060403220252.25836.87763.launchpad@gangotri.ubuntu.com> ** Summary changed: - Problem with development 2.6.15-12 & 13 powerpc-smp kernel + Strange clock behaviour on powerpc-smp -- Strange clock behaviour on powerpc-smp https://launchpad.net/malone/bugs/29420 From mdz at ubuntu.com Mon Apr 3 22:14:58 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Mon, 03 Apr 2006 22:14:58 -0000 Subject: [Bug 29535] Re: Pinnacle PCTV Pro Cards don't work in Dapper (no sound). References: <20060124130353.16602.5284.malonedeb@gandwana.ubuntu.com> Message-ID: <20060403221458.23082.99116.malone@gandwana.ubuntu.com> Does it help to specify any parameters to the bttv module? tuner or radio perhaps? ** Changed in: kernel-package (Ubuntu) Sourcepackagename: kernel-package => linux-source-2.6.15 Status: Unconfirmed => Needs Info -- Pinnacle PCTV Pro Cards don't work in Dapper (no sound). https://launchpad.net/malone/bugs/29535 From ulrik.sverdrup at gmail.com Mon Apr 3 22:34:33 2006 From: ulrik.sverdrup at gmail.com (Ulrik Sverdrup) Date: Mon, 03 Apr 2006 22:34:33 -0000 Subject: [Bug 37714] Re: Sound garbled after resume after suspend References: <20060402122926.5415.33178.malonedeb@gangotri.ubuntu.com> Message-ID: <20060403223433.23108.16034.malone@gandwana.ubuntu.com> This effect is transient. I 'sudo killall esd', restart rhythmbox and after a few play/pause cycles it's back to normal. Not an acceptable workaround -- Sound garbled after resume after suspend https://launchpad.net/malone/bugs/37714 From webmistress at suzansworld.com Mon Apr 3 22:37:10 2006 From: webmistress at suzansworld.com (Suzan) Date: Mon, 03 Apr 2006 22:37:10 -0000 Subject: [Bug 29535] Re: Pinnacle PCTV Pro Cards don't work in Dapper (no sound). References: <20060124130353.16602.5284.malonedeb@gandwana.ubuntu.com> Message-ID: <20060403223710.23082.58409.malone@gandwana.ubuntu.com> I think, it's related to this bug: https://launchpad.net/distros/ubuntu/+source/linux-source-2.6.15/+bug/29789 It seems to be a kernel bug. The bttv module is loaded, rather than snd_bt87x module. A dirty fix is to unload the bttv module and then load the modules in the right order: $ sudo modprobe -r bt878 bttv $ sudo modprobe snd_bt87x $ sudo modprobe bt878 But it's very annoying indeed. -- Pinnacle PCTV Pro Cards don't work in Dapper (no sound). https://launchpad.net/malone/bugs/29535 From mdz at ubuntu.com Mon Apr 3 22:55:15 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Mon, 03 Apr 2006 22:55:15 -0000 Subject: [Bug 29971] Re: Ubuntu doesn't detect and install my wireless orinoco_usb chipset References: <20060129095757.9344.91081.malonedeb@gandwana.ubuntu.com> Message-ID: <20060403225515.25836.46257.launchpad@gangotri.ubuntu.com> ** Changed in: linux-source-2.6.15 (Ubuntu) Assignee: (unassigned) => Ben Collins -- Ubuntu doesn't detect and install my wireless orinoco_usb chipset https://launchpad.net/malone/bugs/29971 From mathieu.perona at ens.fr Mon Apr 3 23:10:42 2006 From: mathieu.perona at ens.fr (Mathieu Perona) Date: Mon, 03 Apr 2006 23:10:42 -0000 Subject: [Bug 30144] kernel oops related to Wifi event References: <20060131111818.26234.41237.malonedeb@gangotri.ubuntu.com> Message-ID: <20060403231042.23108.61899.launchpad@canonical@gandwana.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Assignee: Ben Collins Status: Needs Info Description: Wifi card : NetGear WG511, chipset Marvel ndiswrapper 1.7 (installed in /opt, the breezy ndiswrapper being too old) using the windows XP drivers on the Netgear CD I get the following kernel oops : [4302485.201000] wlan0 (WE) : Wireless Event too big (407) [4302485.211000] Unable to handle kernel paging request at virtual address 6365648d [4302485.211000] printing eip: [4302485.211000] c0120790 [4302485.211000] *pde = 00000000 [4302485.211000] Oops: 0000 [#1] Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Assignee: Ben Collins Status: Needs Info Description: Wifi card : NetGear WG511, chipset Marvel ndiswrapper 1.7 (installed in /opt, the breezy ndiswrapper being too old) using the windows XP drivers on the Netgear CD I get the following kernel oops : [4302485.201000] wlan0 (WE) : Wireless Event too big (407) [4302485.211000] Unable to handle kernel paging request at virtual address 6365648d [4302485.211000] printing eip: [4302485.211000] c0120790 [4302485.211000] *pde = 00000000 [4302485.211000] Oops: 0000 [#1] -- kernel oops related to Wifi event https://launchpad.net/malone/bugs/30144 From mdz at ubuntu.com Mon Apr 3 23:10:42 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Mon, 03 Apr 2006 23:10:42 -0000 Subject: [Bug 30144] Re: kernel oops related to Wifi event References: <20060131111818.26234.41237.malonedeb@gangotri.ubuntu.com> Message-ID: <20060403231042.23108.41065.malone@gandwana.ubuntu.com> You haven't sent the complete oops here; there should be many more lines below that ** Changed in: ndiswrapper (Ubuntu) Sourcepackagename: ndiswrapper => linux-source-2.6.15 Assignee: (unassigned) => Ben Collins Status: Unconfirmed => Needs Info -- kernel oops related to Wifi event https://launchpad.net/malone/bugs/30144 From ubu.petr at seznam.cz Mon Apr 3 23:24:02 2006 From: ubu.petr at seznam.cz (UbuPetr) Date: Mon, 03 Apr 2006 23:24:02 -0000 Subject: [Bug 30051] Iptables or Kernel BUG References: <20060130121820.26234.63355.malonedeb@gangotri.ubuntu.com> Message-ID: <20060403232402.23108.63245.launchpad@canonical@gandwana.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: Package: iptables Version: 1.3.x or Package: linux-image-2.6, linux-image-2.4 Version: all versions After start Forwarding through SNAT or MASQUERADE and the stop SNAT or MASQUERADE you must unload end load again IPTables and NAT modules, otherwise Forwarding will not work! Even further if you Flush NAT IPTables, you must echo 0 > ip_forward before unload IPTables and NAT modules! Demontration: I disovered partial solution: Operating sequence: ---disappear further hell things--- echo "0" > /proc/sys/net/ipv4/ip_forward iptables -t mangle -F iptables -t nat -F iptables -F reboot ---switch on - choose a) or b)--- a) iptables -t nat -A POSTROUTING -o eth0 -s 192.168.2.4 -j SNAT --to-source 10.10.2.6 b) iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE -s 192.168.2.4 echo "1" > /proc/sys/net/ipv4/ip_forward Listen the base of the problem. If wanna do with iptable_nat another things, we must always switch off and switch on again, it will not proof itself! Do you know, that is bug in kernel or iptables? If we switch on SNAT: ---switch off iptables--- iptables -t nat -D POSTROUTING -o eth0 -s 192.168.2.4 -j SNAT --to-source 10.10.2.6 modprobe -r iptable_nat iptable_filter ---switch on iptables--- modprobe iptable_nat iptables -t nat -A POSTROUTING -o eth0 -s 192.168.2.4 -j SNAT --to-source 10.10.2.6 If we switch on MASQUERADE: ---switch off iptables--- iptables -t nat -D POSTROUTING -o eth0 -j MASQUERADE -s 192.168.2.4 modprobe -r ipt_MASQUERADE iptable_nat iptable_filter ---switch on iptables--- modprobe iptable_nat iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE -s 192.168.2.4 If we switch on SNAT and wanna use "iptables -t nat -F": ---switch off iptables--- echo "0" > /proc/sys/net/ipv4/ip_forward iptables -t nat -F modprobe -r iptable_nat iptable_filter ---switch on iptables--- modprobe iptable_nat iptables -t nat -A POSTROUTING -o eth0 -s 192.168.2.4 -j SNAT --to-source 10.10.2.6 echo "1" > /proc/sys/net/ipv4/ip_forward If we switch on MASQUERADE and wanna use "iptables -t nat -F": ---switch off iptables--- echo "0" > /proc/sys/net/ipv4/ip_forward iptables -t nat -F modprobe -r ipt_MASQUERADE iptable_nat iptable_filter ---switch on iptables--- modprobe iptable_nat iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE -s 192.168.2.4 echo "1" > /proc/sys/net/ipv4/ip_forward This is the important thing, if we use "iptables -t nat -F", we must do "echo "0" > /proc/sys/net/ipv4/ip_forward". If missed some step from this operating sequence or failed the order of procedure this operating sequence, forwarding evidently will not working anymore. My PC: CPU: P4 Prescott 2,66 GHz (533 FSB) MB: FIC P4M-800M/T2 (Via PT800CE) Memory: 1GB DDR 400 MHz single channel (2 x 512MB) eth0: Realtek 8100C = RTL-8139/8139C/8139C+ (rev 10) eth1: Edimax EN-9150TXL = VT6105 [Rhine-III] (rev 8b) Affected Distros: Ubuntu/Kubuntu 5.10 (The Breezy Badger), Debian Etch/Sid and maybe more Affected Kernels: 2.4.x, 2.6.x Your's Sincerely, Petr Novák ubu.petr at seznam.cz PS: Excuse me for my bad english. (http://groups.google.com/group/cz.comp.linux/browse_thread/thread/4013e2f5b22aeb26/517f96af44bae92b?hl=cs#517f96af44bae92b) Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: Package: iptables Version: 1.3.x or Package: linux-image-2.6, linux-image-2.4 Version: all versions After start Forwarding through SNAT or MASQUERADE and the stop SNAT or MASQUERADE you must unload end load again IPTables and NAT modules, otherwise Forwarding will not work! Even further if you Flush NAT IPTables, you must echo 0 > ip_forward before unload IPTables and NAT modules! Demontration: I disovered partial solution: Operating sequence: ---disappear further hell things--- echo "0" > /proc/sys/net/ipv4/ip_forward iptables -t mangle -F iptables -t nat -F iptables -F reboot ---switch on - choose a) or b)--- a) iptables -t nat -A POSTROUTING -o eth0 -s 192.168.2.4 -j SNAT --to-source 10.10.2.6 b) iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE -s 192.168.2.4 echo "1" > /proc/sys/net/ipv4/ip_forward Listen the base of the problem. If wanna do with iptable_nat another things, we must always switch off and switch on again, it will not proof itself! Do you know, that is bug in kernel or iptables? If we switch on SNAT: ---switch off iptables--- iptables -t nat -D POSTROUTING -o eth0 -s 192.168.2.4 -j SNAT --to-source 10.10.2.6 modprobe -r iptable_nat iptable_filter ---switch on iptables--- modprobe iptable_nat iptables -t nat -A POSTROUTING -o eth0 -s 192.168.2.4 -j SNAT --to-source 10.10.2.6 If we switch on MASQUERADE: ---switch off iptables--- iptables -t nat -D POSTROUTING -o eth0 -j MASQUERADE -s 192.168.2.4 modprobe -r ipt_MASQUERADE iptable_nat iptable_filter ---switch on iptables--- modprobe iptable_nat iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE -s 192.168.2.4 If we switch on SNAT and wanna use "iptables -t nat -F": ---switch off iptables--- echo "0" > /proc/sys/net/ipv4/ip_forward iptables -t nat -F modprobe -r iptable_nat iptable_filter ---switch on iptables--- modprobe iptable_nat iptables -t nat -A POSTROUTING -o eth0 -s 192.168.2.4 -j SNAT --to-source 10.10.2.6 echo "1" > /proc/sys/net/ipv4/ip_forward If we switch on MASQUERADE and wanna use "iptables -t nat -F": ---switch off iptables--- echo "0" > /proc/sys/net/ipv4/ip_forward iptables -t nat -F modprobe -r ipt_MASQUERADE iptable_nat iptable_filter ---switch on iptables--- modprobe iptable_nat iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE -s 192.168.2.4 echo "1" > /proc/sys/net/ipv4/ip_forward This is the important thing, if we use "iptables -t nat -F", we must do "echo "0" > /proc/sys/net/ipv4/ip_forward". If missed some step from this operating sequence or failed the order of procedure this operating sequence, forwarding evidently will not working anymore. My PC: CPU: P4 Prescott 2,66 GHz (533 FSB) MB: FIC P4M-800M/T2 (Via PT800CE) Memory: 1GB DDR 400 MHz single channel (2 x 512MB) eth0: Realtek 8100C = RTL-8139/8139C/8139C+ (rev 10) eth1: Edimax EN-9150TXL = VT6105 [Rhine-III] (rev 8b) Affected Distros: Ubuntu/Kubuntu 5.10 (The Breezy Badger), Debian Etch/Sid and maybe more Affected Kernels: 2.4.x, 2.6.x Your's Sincerely, Petr Novák ubu.petr at seznam.cz PS: Excuse me for my bad english. (http://groups.google.com/group/cz.comp.linux/browse_thread/thread/4013e2f5b22aeb26/517f96af44bae92b?hl=cs#517f96af44bae92b) -- Iptables or Kernel BUG https://launchpad.net/malone/bugs/30051 From mdz at ubuntu.com Mon Apr 3 23:24:02 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Mon, 03 Apr 2006 23:24:02 -0000 Subject: [Bug 30051] Re: Iptables or Kernel BUG References: <20060130121820.26234.63355.malonedeb@gangotri.ubuntu.com> Message-ID: <20060403232402.23108.50774.launchpad@gandwana.ubuntu.com> ** Changed in: iptables (Ubuntu) Sourcepackagename: iptables => linux-source-2.6.15 -- Iptables or Kernel BUG https://launchpad.net/malone/bugs/30051 From mdz at ubuntu.com Mon Apr 3 23:58:49 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Mon, 03 Apr 2006 23:58:49 -0000 Subject: [Bug 30476] Re: e1000_clean_tx_irq: Detected Tx Unit Hang References: <20060204150702.11612.24781.malonedeb@gandwana.ubuntu.com> Message-ID: <20060403235849.25863.30064.launchpad@gangotri.ubuntu.com> ** Changed in: linux-source-2.6.15 linux-image-2.6.15-14-386 (Ubuntu) Assignee: (unassigned) => Ben Collins -- e1000_clean_tx_irq: Detected Tx Unit Hang https://launchpad.net/malone/bugs/30476 From lakin.wecker at gmail.com Tue Apr 4 00:05:19 2006 From: lakin.wecker at gmail.com (Lakin Wecker) Date: Tue, 04 Apr 2006 00:05:19 -0000 Subject: [Bug 29498] Acer Ferrari 4005 Fails to resume from suspend to RAM References: <20060123232219.15826.52517.malonedeb@gandwana.ubuntu.com> Message-ID: <20060404000519.25836.2087.launchpad@canonical@gangotri.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Confirmed Description: To suspend the computer I selected Suspend from the logout dialog. It quickly blanks the screen and appears to suspend correctly. When I press a key to resume, the power is restored and their is some brief disk activity(3s) and then nothing more happens. I have to hard reboot the computer in order to get back to something useable. This is on flight 3 installed fresh today, and then fully upgraded to the newest available packages as of about 4 hours ago. Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Confirmed Description: To suspend the computer I selected Suspend from the logout dialog. It quickly blanks the screen and appears to suspend correctly. When I press a key to resume, the power is restored and their is some brief disk activity(3s) and then nothing more happens. I have to hard reboot the computer in order to get back to something useable. This is on flight 3 installed fresh today, and then fully upgraded to the newest available packages as of about 4 hours ago. -- Acer Ferrari 4005 Fails to resume from suspend to RAM https://launchpad.net/malone/bugs/29498 From mdz at ubuntu.com Tue Apr 4 00:03:49 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Tue, 04 Apr 2006 00:03:49 -0000 Subject: [Bug 33014] Re: Battery not detected for Vaio PCG-K195HP References: <20060227080445.16580.71813.malonedeb@gandwana.ubuntu.com> Message-ID: <20060404000349.25836.88957.launchpad@gangotri.ubuntu.com> ** Changed in: linux-meta linux-image-2.6-686 (Ubuntu) Assignee: Ubuntu Laptop Team => (unassigned) -- Battery not detected for Vaio PCG-K195HP https://launchpad.net/malone/bugs/33014 From mdz at ubuntu.com Tue Apr 4 00:04:43 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Tue, 04 Apr 2006 00:04:43 -0000 Subject: [Bug 29767] Re: IBM Thinkpad X41 suspend to disk unsatisfactory regression References: <20060126124346.26274.53643.malonedeb@gangotri.ubuntu.com> Message-ID: <20060404000443.25836.8516.launchpad@gangotri.ubuntu.com> ** Changed in: linux-source-2.6.15 (Ubuntu) Assignee: Ubuntu Laptop Team => (unassigned) -- IBM Thinkpad X41 suspend to disk unsatisfactory regression https://launchpad.net/malone/bugs/29767 From mdz at ubuntu.com Tue Apr 4 00:05:19 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Tue, 04 Apr 2006 00:05:19 -0000 Subject: [Bug 29498] Re: Acer Ferrari 4005 Fails to resume from suspend to RAM References: <20060123232219.15826.52517.malonedeb@gandwana.ubuntu.com> Message-ID: <20060404000519.25836.49526.launchpad@gangotri.ubuntu.com> ** Changed in: acpi-support (Ubuntu) Sourcepackagename: acpi-support => linux-source-2.6.15 Assignee: Ubuntu Laptop Team => (unassigned) -- Acer Ferrari 4005 Fails to resume from suspend to RAM https://launchpad.net/malone/bugs/29498 From mdz at ubuntu.com Tue Apr 4 00:27:21 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Tue, 04 Apr 2006 00:27:21 -0000 Subject: [Bug 30372] Re: IBM ThinkCentre critically freezing up and requires hard reset after leaving idle overnight References: <20060203053612.11612.56857.malonedeb@gandwana.ubuntu.com> Message-ID: <20060404002722.23082.81628.launchpad@gandwana.ubuntu.com> ** Changed in: linux-source-2.6.15 (Ubuntu) Assignee: (unassigned) => Ben Collins -- IBM ThinkCentre critically freezing up and requires hard reset after leaving idle overnight https://launchpad.net/malone/bugs/30372 From kristian.hermansen at gmail.com Tue Apr 4 00:58:59 2006 From: kristian.hermansen at gmail.com (Kristian Hermansen) Date: Tue, 04 Apr 2006 00:58:59 -0000 Subject: [Bug 30372] Re: IBM ThinkCentre critically freezing up and requires hard reset after leaving idle overnight References: <20060203053612.11612.56857.malonedeb@gandwana.ubuntu.com> Message-ID: <20060404005859.23108.21966.malone@gandwana.ubuntu.com> Yes, BIOS upgrade also fixed my issue. Could someone post the exact cause of the failure if they find it out? Thanks... -- Kristian Hermansen -- IBM ThinkCentre critically freezing up and requires hard reset after leaving idle overnight https://launchpad.net/malone/bugs/30372 From mdz at ubuntu.com Tue Apr 4 01:00:58 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Tue, 04 Apr 2006 01:00:58 -0000 Subject: [Bug 31035] Re: Fails to recognise drives on DAC 960 Raid controller References: <20060210101324.25275.91459.malonedeb@gangotri.ubuntu.com> Message-ID: <20060404010058.25836.75206.launchpad@gangotri.ubuntu.com> ** Changed in: initramfs-tools (Ubuntu) Status: Unconfirmed => Needs Info -- Fails to recognise drives on DAC 960 Raid controller https://launchpad.net/malone/bugs/31035 From crimsun at fungus.sh.nu Tue Apr 4 01:02:45 2006 From: crimsun at fungus.sh.nu (Daniel T. Chen) Date: Tue, 04 Apr 2006 01:02:45 -0000 Subject: [Bug 26142] Re: kubuntu has darla24 sound card drivers missing References: <20060113144807.21012.22863.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060404010245.25863.6198.malone@gangotri.ubuntu.com> Note that the darla24 (and other Echoaudio chipsets) driver _is_ available in the alsa-source tarball in Ubuntu's universe. John-Paul, you may use the instructions in /usr/share/doc/alsa-source/README.Debian to generate an installable package (.deb) for your current linux-headers-$(uname -r). A bit of background: Upstream ALSA devs maintain alsa-driver and alsa-kernel branches in CVS. The former contains drivers for more chipsets than what's included with the kernel proper (Linux 2.6, and thus, Ubuntu's kernels), which syncs with alsa-kernel. Debian's/Ubuntu's alsa-driver source package (which generates the alsa-source binary package) mirrors upstream ALSA's alsa-driver tarball. When ALSA developers feel that a driver exclusively in the alsa-driver branch is mature enough to migrate to the alsa-kernel branch, they do so. Currently the Echoaudio drivers remain solely in the alsa-driver branch, so I am disinclined to think that supporting them is wise for Dapper. -- kubuntu has darla24 sound card drivers missing https://launchpad.net/malone/bugs/26142 From mdz at ubuntu.com Tue Apr 4 01:06:39 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Tue, 04 Apr 2006 01:06:39 -0000 Subject: [Bug 30995] Re: dm_mod causes false busy on mount attempts References: <20060209201318.25235.10186.malonedeb@gangotri.ubuntu.com> Message-ID: <20060404010639.23108.9369.malone@gandwana.ubuntu.com> I haven't seen any similar reports; the only case I know of where this happens is with EVMS compatibility volumes, but that has been fixed for ages in Ubuntu kernels. Perhaps you disabled evms/lvm startup in userland but not in initramfs. -- dm_mod causes false busy on mount attempts https://launchpad.net/malone/bugs/30995 From mdz at ubuntu.com Tue Apr 4 01:06:58 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Tue, 04 Apr 2006 01:06:58 -0000 Subject: [Bug 30995] Re: dm_mod causes false busy on mount attempts References: <20060209201318.25235.10186.malonedeb@gangotri.ubuntu.com> Message-ID: <20060404010658.23082.2523.malone@gandwana.ubuntu.com> (of course, that doesn't explain the original problem, unless you're using a non-Ubuntu kernel there too) -- dm_mod causes false busy on mount attempts https://launchpad.net/malone/bugs/30995 From mdz at ubuntu.com Tue Apr 4 01:22:13 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Tue, 04 Apr 2006 01:22:13 -0000 Subject: [Bug 30372] Re: IBM ThinkCentre critically freezing up and requires hard reset after leaving idle overnight References: <20060203053612.11612.56857.malonedeb@gandwana.ubuntu.com> Message-ID: <20060404012213.23108.51725.launchpad@gandwana.ubuntu.com> *** This bug is a duplicate of bug 8341 *** ** This bug has been marked a duplicate of bug 8341 System locks up at boot with 686 and 686-smp kernels -- IBM ThinkCentre critically freezing up and requires hard reset after leaving idle overnight https://launchpad.net/malone/bugs/30372 From mdz at ubuntu.com Tue Apr 4 01:23:51 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Tue, 04 Apr 2006 01:23:51 -0000 Subject: [Bug 29789] Re: tv card audio not working References: <20060126170552.26274.32755.malonedeb@gangotri.ubuntu.com> Message-ID: <20060404012351.25836.80841.malone@gangotri.ubuntu.com> It should work to use snd_bt87x with bttv (which drives the video portion of the card) -- tv card audio not working https://launchpad.net/malone/bugs/29789 From mdz at ubuntu.com Tue Apr 4 01:22:13 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Tue, 04 Apr 2006 01:22:13 -0000 Subject: [Bug 8341] Re: System locks up at boot with 686 and 686-smp kernels References: <20060113130311.21012.18424.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060404012213.23108.55287.launchpad@gandwana.ubuntu.com> ** Bug 30372 has been marked a duplicate of this bug -- System locks up at boot with 686 and 686-smp kernels https://launchpad.net/malone/bugs/8341 From mdz at ubuntu.com Tue Apr 4 01:28:35 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Tue, 04 Apr 2006 01:28:35 -0000 Subject: [Bug 31073] Re: Network not work with this kernel on my laptop HP NX7010 References: <20060210180357.11382.69470.malonedeb@gandwana.ubuntu.com> Message-ID: <20060404012835.23108.95506.malone@gandwana.ubuntu.com> Rejecting bogus extra task; fear not, the bug is still open ** Changed in: linux-image-2.6.15-15-686 (Ubuntu) Sourcepackagename: linux-image-2.6.15-15-686 => None ** Changed in: Ubuntu Status: Unconfirmed => Rejected -- Network not work with this kernel on my laptop HP NX7010 https://launchpad.net/malone/bugs/31073 From mdz at ubuntu.com Tue Apr 4 01:38:31 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Tue, 04 Apr 2006 01:38:31 -0000 Subject: [Bug 31126] Re: Kernel panic after installation of linux-386 [Dapper] References: <20060211062813.25235.10693.malonedeb@gangotri.ubuntu.com> Message-ID: <20060404013831.25836.95918.malone@gangotri.ubuntu.com> initramfs-tools is already cautious about this; it doesn't move the initramfs into place until it has been successfully created. Are you sure that the package installation didn't fail? Do you have a log? -- Kernel panic after installation of linux-386 [Dapper] https://launchpad.net/malone/bugs/31126 From mdz at ubuntu.com Tue Apr 4 01:46:23 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Tue, 04 Apr 2006 01:46:23 -0000 Subject: [Bug 31219] Re: USB stack dies when I disconnect my mobile phone's USB cable References: <20060212122502.1195.20135.malonedeb@gandwana.ubuntu.com> Message-ID: <20060404014623.25836.11725.launchpad@gangotri.ubuntu.com> ** Changed in: linux-source-2.6.15 (Ubuntu) Assignee: (unassigned) => Ben Collins -- USB stack dies when I disconnect my mobile phone's USB cable https://launchpad.net/malone/bugs/31219 From mdz at ubuntu.com Tue Apr 4 01:51:26 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Tue, 04 Apr 2006 01:51:26 -0000 Subject: [Bug 31298] Re: kernel updates overwrite lock protection in grub config References: <20060213104506.1498.89083.malonedeb@gangotri.ubuntu.com> Message-ID: <20060404015126.25863.22027.launchpad@gangotri.ubuntu.com> *** This bug is a duplicate of bug 21412 *** ** This bug has been marked a duplicate of bug 21412 Default update-grub behaviour is not intuitive -- kernel updates overwrite lock protection in grub config https://launchpad.net/malone/bugs/31298 From mdz at ubuntu.com Tue Apr 4 01:51:13 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Tue, 04 Apr 2006 01:51:13 -0000 Subject: [Bug 21412] Re: Default update-grub behaviour is not intuitive References: <20060113141241.21012.46008.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060404015113.25863.89361.launchpad@gangotri.ubuntu.com> ** Bug 31298 has been marked a duplicate of this bug -- Default update-grub behaviour is not intuitive https://launchpad.net/malone/bugs/21412 From linux at strigen.com Tue Apr 4 02:08:24 2006 From: linux at strigen.com (Tor Harald Thorland) Date: Tue, 04 Apr 2006 02:08:24 -0000 Subject: [Bug 31351] Epson Stylus CX 6400 Not Working in Dapper References: <20060213220313.1498.92763.malonedeb@gangotri.ubuntu.com> Message-ID: <20060404020824.23082.22127.launchpad@canonical@gandwana.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Assignee: Ben Collins Status: Unconfirmed Description: My Epson Stylus CX 6400 Printer/Scanner is not working in Dapper. It doesn't show up as it used to in Breezy (Where it was working) It is not detected in the printer setup dialog. In the var/log messages I'll get the following: Feb 13 19:21:48 localhost kernel: [4294877.076000] usb 5-6: new high speed USB device using ehci_hcd and address 4 Feb 13 19:21:48 localhost kernel: [4294877.467000] drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 4 if 1 alt 0 proto 2 vid 0x04B8 pid 0x0805 Feb 13 19:21:48 localhost kernel: [4294877.468000] usbcore: registered new driver usblp Feb 13 19:21:48 localhost kernel: [4294877.468000] drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver Feb 13 19:21:48 localhost kernel: [4294877.547000] Initializing USB Mass Storage driver... Feb 13 19:21:48 localhost kernel: [4294877.548000] scsi2 : SCSI emulation for USB Mass Storage devices Feb 13 19:21:48 localhost kernel: [4294877.548000] usbcore: registered new driver usb-storage Feb 13 19:21:48 localhost kernel: [4294877.548000] USB Mass Storage support registered. Feb 13 19:21:53 localhost kernel: [4294882.559000] Vendor: EPSON Model: Stylus Storage Rev: 1.00 Feb 13 19:21:53 localhost kernel: [4294882.559000] Type: Direct-Access ANSI SCSI revision: 02 Feb 13 19:21:53 localhost kernel: [4294882.563000] sd 2:0:0:0: Attached scsi removable disk sdb Feb 13 19:21:53 localhost kernel: [4294882.563000] sd 2:0:0:0: Attached scsi generic sg2 type 0 Feb 13 19:24:02 localhost kernel: [4295011.771000] sdb : READ CAPACITY failed. Feb 13 19:24:02 localhost kernel: [4295011.771000] sdb : status=0, message=00, host=7, driver=00 Feb 13 19:24:02 localhost kernel: [4295011.771000] sdb : sense not available. Feb 13 19:24:02 localhost kernel: [4295011.772000] sdb: Write Protect is off Feb 13 19:24:02 localhost kernel: [4295011.775000] sdb : READ CAPACITY failed. Feb 13 19:24:02 localhost kernel: [4295011.775000] sdb : status=0, message=00, host=7, driver=00 Feb 13 19:24:02 localhost kernel: [4295011.775000] sdb : sense not available. Feb 13 19:24:02 localhost kernel: [4295011.776000] sdb: Write Protect is off Feb 13 19:24:02 localhost kernel: [4295011.776000] sdb:<3>Buffer I/O error on device sdb, logical block 0 Feb 13 19:24:02 localhost kernel: [4295011.776000] unable to read partition table Feb 13 19:24:02 localhost kernel: [4295011.783000] sdb : READ CAPACITY failed. Feb 13 19:24:02 localhost kernel: [4295011.783000] sdb : status=0, message=00, host=7, driver=00 Feb 13 19:24:02 localhost kernel: [4295011.784000] sdb : sense not available. Feb 13 19:24:02 localhost kernel: [4295011.784000] sdb: Write Protect is off Feb 13 19:24:02 localhost kernel: [4295011.789000] sdb : READ CAPACITY failed. Feb 13 19:24:02 localhost kernel: [4295011.789000] sdb : status=0, message=00, host=7, driver=00 Feb 13 19:24:02 localhost kernel: [4295011.789000] sdb : sense not available. Feb 13 19:24:02 localhost kernel: [4295011.790000] sdb: Write Protect is off Feb 13 19:24:02 localhost kernel: [4295011.790000] sdb:<3>Buffer I/O error on device sdb, logical block 0 Feb 13 19:24:02 localhost kernel: [4295011.790000] unable to read partition table Feb 13 19:24:02 localhost kernel: [4295011.901000] usb 5-6: USB disconnect, address 4 Feb 13 19:24:02 localhost kernel: [4295011.901000] drivers/usb/class/usblp.c: usblp0: removed Please advice me how to give you more info about it. Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Assignee: Ben Collins Status: Unconfirmed Description: My Epson Stylus CX 6400 Printer/Scanner is not working in Dapper. It doesn't show up as it used to in Breezy (Where it was working) It is not detected in the printer setup dialog. In the var/log messages I'll get the following: Feb 13 19:21:48 localhost kernel: [4294877.076000] usb 5-6: new high speed USB device using ehci_hcd and address 4 Feb 13 19:21:48 localhost kernel: [4294877.467000] drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 4 if 1 alt 0 proto 2 vid 0x04B8 pid 0x0805 Feb 13 19:21:48 localhost kernel: [4294877.468000] usbcore: registered new driver usblp Feb 13 19:21:48 localhost kernel: [4294877.468000] drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver Feb 13 19:21:48 localhost kernel: [4294877.547000] Initializing USB Mass Storage driver... Feb 13 19:21:48 localhost kernel: [4294877.548000] scsi2 : SCSI emulation for USB Mass Storage devices Feb 13 19:21:48 localhost kernel: [4294877.548000] usbcore: registered new driver usb-storage Feb 13 19:21:48 localhost kernel: [4294877.548000] USB Mass Storage support registered. Feb 13 19:21:53 localhost kernel: [4294882.559000] Vendor: EPSON Model: Stylus Storage Rev: 1.00 Feb 13 19:21:53 localhost kernel: [4294882.559000] Type: Direct-Access ANSI SCSI revision: 02 Feb 13 19:21:53 localhost kernel: [4294882.563000] sd 2:0:0:0: Attached scsi removable disk sdb Feb 13 19:21:53 localhost kernel: [4294882.563000] sd 2:0:0:0: Attached scsi generic sg2 type 0 Feb 13 19:24:02 localhost kernel: [4295011.771000] sdb : READ CAPACITY failed. Feb 13 19:24:02 localhost kernel: [4295011.771000] sdb : status=0, message=00, host=7, driver=00 Feb 13 19:24:02 localhost kernel: [4295011.771000] sdb : sense not available. Feb 13 19:24:02 localhost kernel: [4295011.772000] sdb: Write Protect is off Feb 13 19:24:02 localhost kernel: [4295011.775000] sdb : READ CAPACITY failed. Feb 13 19:24:02 localhost kernel: [4295011.775000] sdb : status=0, message=00, host=7, driver=00 Feb 13 19:24:02 localhost kernel: [4295011.775000] sdb : sense not available. Feb 13 19:24:02 localhost kernel: [4295011.776000] sdb: Write Protect is off Feb 13 19:24:02 localhost kernel: [4295011.776000] sdb:<3>Buffer I/O error on device sdb, logical block 0 Feb 13 19:24:02 localhost kernel: [4295011.776000] unable to read partition table Feb 13 19:24:02 localhost kernel: [4295011.783000] sdb : READ CAPACITY failed. Feb 13 19:24:02 localhost kernel: [4295011.783000] sdb : status=0, message=00, host=7, driver=00 Feb 13 19:24:02 localhost kernel: [4295011.784000] sdb : sense not available. Feb 13 19:24:02 localhost kernel: [4295011.784000] sdb: Write Protect is off Feb 13 19:24:02 localhost kernel: [4295011.789000] sdb : READ CAPACITY failed. Feb 13 19:24:02 localhost kernel: [4295011.789000] sdb : status=0, message=00, host=7, driver=00 Feb 13 19:24:02 localhost kernel: [4295011.789000] sdb : sense not available. Feb 13 19:24:02 localhost kernel: [4295011.790000] sdb: Write Protect is off Feb 13 19:24:02 localhost kernel: [4295011.790000] sdb:<3>Buffer I/O error on device sdb, logical block 0 Feb 13 19:24:02 localhost kernel: [4295011.790000] unable to read partition table Feb 13 19:24:02 localhost kernel: [4295011.901000] usb 5-6: USB disconnect, address 4 Feb 13 19:24:02 localhost kernel: [4295011.901000] drivers/usb/class/usblp.c: usblp0: removed Please advice me how to give you more info about it. -- Epson Stylus CX 6400 Not Working in Dapper https://launchpad.net/malone/bugs/31351 From mdz at ubuntu.com Tue Apr 4 02:08:24 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Tue, 04 Apr 2006 02:08:24 -0000 Subject: [Bug 31351] Re: Epson Stylus CX 6400 Not Working in Dapper References: <20060213220313.1498.92763.malonedeb@gangotri.ubuntu.com> Message-ID: <20060404020824.23082.85824.malone@gandwana.ubuntu.com> The USB device is seen as disconnected by the kernel; the problem is there, and not with the layers above ** Changed in: gutenprint (Ubuntu) Sourcepackagename: gutenprint => linux-source-2.6.15 Assignee: (unassigned) => Ben Collins -- Epson Stylus CX 6400 Not Working in Dapper https://launchpad.net/malone/bugs/31351 From mdz at ubuntu.com Tue Apr 4 02:13:43 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Tue, 04 Apr 2006 02:13:43 -0000 Subject: [Bug 31526] Re: [Dapper Flight 3] error en syslog, apic and drive_cmd References: <20060215161626.19528.2243.malonedeb@gandwana.ubuntu.com> Message-ID: <20060404021343.23108.47949.malone@gandwana.ubuntu.com> Have you tried updating your BIOS? -- [Dapper Flight 3] error en syslog, apic and drive_cmd https://launchpad.net/malone/bugs/31526 From mdz at ubuntu.com Tue Apr 4 02:19:11 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Tue, 04 Apr 2006 02:19:11 -0000 Subject: [Bug 31730] Re: JFS is flakey References: <20060217052633.795.42803.malonedeb@gandwana.ubuntu.com> Message-ID: <20060404021911.23082.99393.malone@gandwana.ubuntu.com> Ubuntu doesn't use JFS by default ** Changed in: linux-meta linux-amd64-k8 (Ubuntu) Sourcepackagename: linux-meta => linux-source-2.6.15 Binarypackagename: linux-amd64-k8 => None ** Changed in: linux-source-2.6.15 (Ubuntu) Severity: Normal => Minor -- JFS is flakey https://launchpad.net/malone/bugs/31730 From adconrad at 0c3.net Tue Apr 4 02:23:49 2006 From: adconrad at 0c3.net (Adam Conrad) Date: Tue, 04 Apr 2006 02:23:49 -0000 Subject: [Bug 31126] Re: Kernel panic after installation of linux-386 [Dapper] References: <20060211062813.25235.10693.malonedeb@gangotri.ubuntu.com> Message-ID: <20060404022349.23082.21910.malone@gandwana.ubuntu.com> Actually, Matt, it's a longstanding bug in initramfs-tools (and one I refuse to let myself forget to fix before dapper) that initramfs-tools doesn't have much in the way of useful error conditions, and certainly doesn't fail it if runs out of space. This bug if very real (and very annoying, and very getting fixed next week, with several other "Eek, initramfs-tools is broken in weird ways, but we never noticed until now" bugs. ** Changed in: initramfs-tools (Ubuntu) Severity: Normal => Major Priority: None => High Status: Unconfirmed => Confirmed -- Kernel panic after installation of linux-386 [Dapper] https://launchpad.net/malone/bugs/31126 From mdz at ubuntu.com Tue Apr 4 02:33:29 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Tue, 04 Apr 2006 02:33:29 -0000 Subject: [Bug 31857] Re: r818x driver freezes randomly References: <20060218061331.1387.68568.malonedeb@gangotri.ubuntu.com> Message-ID: <20060404023329.23108.86669.launchpad@gandwana.ubuntu.com> ** Changed in: linux-source-2.6.15 linux-image-2.6.15-15-686 (Ubuntu) Assignee: (unassigned) => Ben Collins -- r818x driver freezes randomly https://launchpad.net/malone/bugs/31857 From mdz at ubuntu.com Tue Apr 4 02:36:08 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Tue, 04 Apr 2006 02:36:08 -0000 Subject: [Bug 31806] Re: Hangs during boot at init-premount References: <20060217195521.833.69281.malonedeb@gandwana.ubuntu.com> Message-ID: <20060404023608.25836.14919.malone@gangotri.ubuntu.com> According to comments, this problem is no longer present in recent Dapper milestones. If the fact that you need to use noapic with this machine is not already reported as a bug, please file it separately. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Unconfirmed => Rejected -- Hangs during boot at init-premount https://launchpad.net/malone/bugs/31806 From mdz at ubuntu.com Tue Apr 4 02:40:27 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Tue, 04 Apr 2006 02:40:27 -0000 Subject: [Bug 31126] Re: [Bug 31126] Re: Kernel panic after installation of linux-386 [Dapper] References: <20060211062813.25235.10693.malonedeb@gangotri.ubuntu.com> <20060404022349.23082.21910.malone@gandwana.ubuntu.com> Message-ID: <20060404024027.GJ11734@alcor.net> On Tue, Apr 04, 2006 at 02:23:49AM -0000, Adam Conrad wrote: > Actually, Matt, it's a longstanding bug in initramfs-tools (and one I > refuse to let myself forget to fix before dapper) that initramfs-tools > doesn't have much in the way of useful error conditions, and certainly > doesn't fail it if runs out of space. This bug if very real (and very > annoying, and very getting fixed next week, with several other "Eek, > initramfs-tools is broken in weird ways, but we never noticed until now" > bugs. I see; so the kernel is dutifully paying attention to error returns from initramfs-tools...which it doesn't provide. ;-) -- - mdz -- Kernel panic after installation of linux-386 [Dapper] https://launchpad.net/malone/bugs/31126 From kleeman at cims.nyu.edu Tue Apr 4 02:48:37 2006 From: kleeman at cims.nyu.edu (Richard Kleeman) Date: Tue, 04 Apr 2006 02:48:37 -0000 Subject: [Bug 14394] Re: cdrecord/k3b/nautilus problem References: <20060113133632.21012.3776.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060404024837.23082.14396.malone@gandwana.ubuntu.com> EXCELLENT NEWS! The 2.6.17-rc1 kernel makes this bug virtually disappear. cd-r disks mount as expected cd-rw disks can be written to successfully using nautilus. None of the previous nasty kernel error messages occur. The remaining wrinkle is that the following messages occur in dmesg during a burn: [4319535.861000] scsi: unknown opcode 0xe9 [4319535.861000] scsi: unknown opcode 0xed [4319538.762000] scsi: unknown opcode 0x01 and two others. However there appear no bad side effects and I noted that similar messages occured with the breezy kernel. So I would say this bug might be able to be closed if the aic79xx changes noted above could be backported to dapper. Ben is that possible??? PLEASE! Note: I do not know whether aic7xxx is fixed in rc1 however..... -- cdrecord/k3b/nautilus problem https://launchpad.net/malone/bugs/14394 From tskisner.public at gmail.com Tue Apr 4 03:21:43 2006 From: tskisner.public at gmail.com (TedKisner) Date: Tue, 04 Apr 2006 03:21:43 -0000 Subject: [Bug 33855] Re: A new Panasonic ACPI driver is required for kernel-2.6.15 References: <20060306024325.22115.48779.malonedeb@gandwana.ubuntu.com> Message-ID: <20060404032143.25836.37732.malone@gangotri.ubuntu.com> I just wanted to confirm that the new driver in the original report works correctly on a Panasonic R4. I don't think the rejected patch (changing PCC_KEYINPUT to 1) is necessary. With the unmodified new driver, the panasonic brightness events are handled correctly (after fixing the panabright.sh script- see tarball in #16424). The audio events simply need some handler scripts for the events. See the scripts I proposed to the acpi-support bug #16424. The final "strangeness" that occurs is that acpi_fakekey {113, 114, or 115} produces X keycodes of 160, 174, and 176. I have successfully got the keys working under KDE by using xmodmap to map the keycodes to fake function keys, and then using these function keys to adjust the mixer. This acpi_fakekey problem is not related to the pcc_acpi driver, and I'm guessing indicates that something is wrong with the X keymap or keyboard layout. The kernel key layout (from getkeycodes) has the correct scancode --> keycode mapping... So to recap, the 3 separate problems are 1. need new pcc_acpi driver - already committed according this report. this fixes the kernel oops. 2. (unrelated to this bug) need new panabright.sh that computes brightness increments dynamically plus audio handling scripts. Found in tarball in bug #16242. 3. (unrelated to this bug) need to have acpi_fakekey 113, 114, and 115 actually generate the same keycodes under X. (or work around by using xmodmap). If anyone has clues about how to fix number 3 above, let me know and we can file a bug against acpi-support so that these laptops work "out of the box". -Ted -- A new Panasonic ACPI driver is required for kernel-2.6.15 https://launchpad.net/malone/bugs/33855 From mattdill at alumni.rice.edu Tue Apr 4 03:21:58 2006 From: mattdill at alumni.rice.edu (MDill) Date: Tue, 04 Apr 2006 03:21:58 -0000 Subject: [Bug 19054] Re: pcmcia modem References: <20060113135933.21012.1792.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060404032158.25863.61318.malone@gangotri.ubuntu.com> Sorry, I should have posted back sooner. I got it to work by explicitly excluding every irq except 11 in /etc/pcmcia/config.opts -- pcmcia modem https://launchpad.net/malone/bugs/19054 From dieguito at gmail.com Tue Apr 4 04:31:27 2006 From: dieguito at gmail.com (dieguito) Date: Tue, 04 Apr 2006 04:31:27 -0000 Subject: [Bug 31857] Re: r818x driver freezes randomly References: <20060218061331.1387.68568.malonedeb@gangotri.ubuntu.com> Message-ID: <20060404043127.23082.61400.malone@gandwana.ubuntu.com> I can confirm that using ndiswrapper works like a charm. I have the same modules blacklisted. Also I should add that doing NFS transmissions (sending, not receiving) freezes the system. SMB seems to have the same problems but very few times. -- r818x driver freezes randomly https://launchpad.net/malone/bugs/31857 From autocrosser at macdialup.com Tue Apr 4 04:36:29 2006 From: autocrosser at macdialup.com (Dean Loros) Date: Tue, 04 Apr 2006 04:36:29 -0000 Subject: [Bug 29420] Re: [Bug 29420] Re: Strange clock behaviour on powerpc-smp References: <20060123071446.16602.91711.malonedeb@gandwana.ubuntu.com> <20060403220252.25836.87763.launchpad@gangotri.ubuntu.com> Message-ID: <4431F7CD.7090608@macdialup.com> Hello Matt-- I have reported on this problem several times over the last few months--every kernel after 15-11-smp has had this strange clock/timing issue--I am running a very stock Dual MDD 1.25 Mac with 2 gig of memory--I re-installed Dapper about a month ago in the hope that a fresh install would fix the problem--the only change is that the desktop is slightly more stable--I still can not use a smp kernel for my daily use--Other than this issue, Dapper has been MUCH better than Breezy. Thank you for your time. Dean Loros Performance by Design Ltd. Matt Zimmerman wrote: > ** Summary changed: > > - Problem with development 2.6.15-12 & 13 powerpc-smp kernel > + Strange clock behaviour on powerpc-smp > -- Strange clock behaviour on powerpc-smp https://launchpad.net/malone/bugs/29420 From lenz at cs.wisc.edu Tue Apr 4 05:19:45 2006 From: lenz at cs.wisc.edu (John Lenz) Date: Tue, 04 Apr 2006 05:19:45 -0000 Subject: [Bug 37971] System freeze when using agpgart References: <20060404051945.25836.15834.malonedeb@gangotri.ubuntu.com> Message-ID: <20060404051945.25836.15834.malonedeb@gangotri.ubuntu.com> Public bug reported: Affects: linux-source-2.6.12 linux-image-2.6.12-9-amd64-generic (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: Running Breezy Badger I have a dual monitor setup, with a Radeon 9200 AGP (RV280) and Nvidia RIVA TNT2 Model 64 PCI card. What happens is if I try and run both video cards at 1280x1024, about 3-4 seconds after logging in the system completly freezes... Ctrl-Alt-Backspace no longer restarts X, mouse doesn't move, numlock doesn't work anymore, etc.... If I run the TNT2 PCI card at 1024x768 resolution, everything works just fine. Also, if I block agpgart (and radeon, and drm) modules from loading into the kernel (by sticking some stuff into /etc/modules.d), I can run both video cards at 1280x1024. So, without agpgart loaded, both run fine at 1280x1024, but with agpgart loaded I can run PCI card at 1024x768 but it freezes at 1280x1024. I looked through kern.log, but no oopses are in there. Here is some output from kern.log when loading agpgart pr 3 23:07:13 localhost kernel: [ 16.814772] agpgart: Detected AGP bridge 0 Apr 3 23:07:13 localhost kernel: [ 16.819005] agpgart: AGP aperture is 128M @ 0xe0000000 Apr 3 23:07:23 localhost kernel: [ 64.092212] agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0. Apr 3 23:07:23 localhost kernel: [ 64.092225] agpgart: Putting AGP V3 device at 0000:00:00.0 into 4x mode Apr 3 23:07:23 localhost kernel: [ 64.092250] agpgart: Putting AGP V3 device at 0000:01:00.0 into 4x mode 0000:01:00.0 is the AGP card, and 0000:00:00.0 is the PCI card. My first guess is some sort of buffer overflow in agpgart, when using the higher resolution. I find it odd that agpgart is setting both cards up, when only one is AGP and the other is a normal PCI card. -- System freeze when using agpgart https://launchpad.net/malone/bugs/37971 From ryan at spacecoaster.org Tue Apr 4 05:16:14 2006 From: ryan at spacecoaster.org (Ryan Lovett) Date: Tue, 04 Apr 2006 05:16:14 -0000 Subject: [Bug 30995] Re: [Bug 30995] Re: dm_mod causes false busy on mount attempts References: <20060209201318.25235.10186.malonedeb@gangotri.ubuntu.com> <20060404010658.23082.2523.malone@gandwana.ubuntu.com> Message-ID: <20060404051614.GB4520@spacecoaster.org> On Tue, Apr 04, 2006 at 01:06:58AM -0000, Matt Zimmerman wrote: > (of course, that doesn't explain the original problem, unless you're > using a non-Ubuntu kernel there too) > -- > dm_mod causes false busy on mount attempts > https://launchpad.net/malone/bugs/30995 Yes, "I tried building a kernel from kernel.org (2.6.15.3), but that produces the same problem on Breezy." also because there is no working kernel for AMD64/SMP in breezy: https://launchpad.net/distros/ubuntu/+source/linux-source-2.6.15/+bug/18997 Ryan -- dm_mod causes false busy on mount attempts https://launchpad.net/malone/bugs/30995 From robitaille at gmail.com Tue Apr 4 05:47:52 2006 From: robitaille at gmail.com (Daniel Robitaille) Date: Tue, 04 Apr 2006 05:47:52 -0000 Subject: [Bug 14750] Re: No ethernet, nor sata-disks with AMD64/K8S-MX References: <20060113133826.21012.37806.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060404054752.25863.53759.malone@gangotri.ubuntu.com> Thanks for testing that the ethernet and SATA works with the kernel in Dapper. I'll mark this bug as fixed. As for the sound problem, please open a new bug report about that specific problem (if you haven't done so yet). ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Needs Info => Fix Released -- No ethernet, nor sata-disks with AMD64/K8S-MX https://launchpad.net/malone/bugs/14750 From dn at offspringnet.net Tue Apr 4 06:09:34 2006 From: dn at offspringnet.net (grendel970) Date: Tue, 04 Apr 2006 06:09:34 -0000 Subject: [Bug 37977] kernel floppy module does not load References: <20060404060934.25863.89639.malonedeb@gangotri.ubuntu.com> Message-ID: <20060404060934.25863.89639.malonedeb@gangotri.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 linux-image-2.6.15-19-386 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: The kernel floppy module does not load. Under breezy it loaded automatically. If I load it by hand via: # insmod floppy.ko it works fine. I have an asus p4s800d-x motherboard. It doesn't automatically load with pnp turned off or on in the bios. Anything else to try? -- kernel floppy module does not load https://launchpad.net/malone/bugs/37977 From axl000 at gmail.com Tue Apr 4 06:06:57 2006 From: axl000 at gmail.com (Rodrigo Olivares) Date: Tue, 04 Apr 2006 06:06:57 -0000 Subject: [Bug 37975] no sound in my laptop References: <20060404060657.23082.46696.malonedeb@gandwana.ubuntu.com> Message-ID: <20060404060657.23082.46696.malonedeb@gandwana.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: i have no sound in my centrino, please help me. some info. root at axlmachine:~# lspci -v && lspci -nv && cat /proc/asound/cards 0000:00:00.0 Host bridge: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller (rev 03) Subsystem: QUANTA Computer Inc: Unknown device 0745 Flags: bus master, fast devsel, latency 0 Capabilities: [e0] #09 [2109] 0000:00:02.0 VGA compatible controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 03) (prog-if 00 [VGA]) Subsystem: QUANTA Computer Inc: Unknown device 0745 Flags: bus master, fast devsel, latency 0, IRQ 177 Memory at b0080000 (32-bit, non-prefetchable) [size=512K] I/O ports at 1800 [size=8] Memory at c0000000 (32-bit, prefetchable) [size=256M] Memory at b0000000 (32-bit, non-prefetchable) [size=256K] Capabilities: [d0] Power Management version 2 0000:00:02.1 Display controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 03) Subsystem: QUANTA Computer Inc: Unknown device 0745 Flags: fast devsel Memory at 32000000 (32-bit, non-prefetchable) [disabled] [size=512K] Capabilities: [d0] Power Management version 2 0000:00:1c.0 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 (rev 04) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 Capabilities: [40] #10 [0141] Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0 Enable+ Capabilities: [90] #0d [0000] Capabilities: [a0] Power Management version 2 0000:00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 04) (prog-if 00 [UHCI]) Subsystem: QUANTA Computer Inc: Unknown device 0745 Flags: bus master, medium devsel, latency 0, IRQ 217 I/O ports at 1820 [size=32] 0000:00:1d.1 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 04) (prog-if 00 [UHCI]) Subsystem: QUANTA Computer Inc: Unknown device 0745 Flags: bus master, medium devsel, latency 0, IRQ 225 I/O ports at 1840 [size=32] 0000:00:1d.2 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 04) (prog-if 00 [UHCI]) Subsystem: QUANTA Computer Inc: Unknown device 0745 Flags: bus master, medium devsel, latency 0, IRQ 209 I/O ports at 1860 [size=32] 0000:00:1d.3 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 (rev 04) (prog-if 00 [UHCI]) Subsystem: QUANTA Computer Inc: Unknown device 0745 Flags: bus master, medium devsel, latency 0, IRQ 177 I/O ports at 1880 [size=32] 0000:00:1d.7 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 04) (prog-if 20 [EHCI]) Subsystem: QUANTA Computer Inc: Unknown device 0745 Flags: bus master, medium devsel, latency 0, IRQ 217 Memory at b0040000 (32-bit, non-prefetchable) [size=1K] Capabilities: [50] Power Management version 2 Capabilities: [58] #0a [20a0] 0000:00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev d4) (prog-if 01 [Subtractive decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=06, subordinate=07, sec-latency=216 I/O behind bridge: 00004000-00004fff Memory behind bridge: b8000000-b80fffff Prefetchable memory behind bridge: 0000000030000000-0000000031f00000 Capabilities: [50] #0d [0000] 0000:00:1e.2 Multimedia audio controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Audio Controller (rev 04) Subsystem: QUANTA Computer Inc: Unknown device 0745 Flags: bus master, medium devsel, latency 0, IRQ 169 I/O ports at 1c00 [size=256] I/O ports at 18c0 [size=64] Memory at b0040800 (32-bit, non-prefetchable) [size=512] Memory at b0040400 (32-bit, non-prefetchable) [size=256] Capabilities: [50] Power Management version 2 0000:00:1e.3 Modem: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Modem Controller (rev 04) (prog-if 00 [Generic]) Subsystem: QUANTA Computer Inc: Unknown device 0745 Flags: medium devsel, IRQ 201 I/O ports at 2400 [size=256] I/O ports at 2000 [size=128] Capabilities: [50] Power Management version 2 0000:00:1f.0 ISA bridge: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge (rev 04) Subsystem: QUANTA Computer Inc: Unknown device 0745 Flags: bus master, medium devsel, latency 0 0000:00:1f.1 IDE interface: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) IDE Controller (rev 04) (prog-if 8a [Master SecP PriP]) Subsystem: QUANTA Computer Inc: Unknown device 0745 Flags: bus master, medium devsel, latency 0, IRQ 209 I/O ports at I/O ports at I/O ports at I/O ports at I/O ports at 1810 [size=16] 0000:00:1f.3 SMBus: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller (rev 04) Subsystem: QUANTA Computer Inc: Unknown device 0745 Flags: medium devsel, IRQ 11 I/O ports at 20a0 [size=32] 0000:06:01.0 CardBus bridge: Texas Instruments PCIxx21/x515 Cardbus Controller Subsystem: QUANTA Computer Inc: Unknown device 0745 Flags: bus master, medium devsel, latency 168, IRQ 177 Memory at b8006000 (32-bit, non-prefetchable) [size=4K] Bus: primary=06, secondary=07, subordinate=0a, sec-latency=176 Memory window 0: 30000000-31fff000 (prefetchable) Memory window 1: 34000000-35fff000 I/O window 0: 00004400-000044ff I/O window 1: 00004800-000048ff 16-bit legacy interface ports at 0001 0000:06:01.2 FireWire (IEEE 1394): Texas Instruments OHCI Compliant IEEE 1394 Host Controller (prog-if 10 [OHCI]) Subsystem: QUANTA Computer Inc: Unknown device 0745 Flags: bus master, medium devsel, latency 32, IRQ 177 Memory at b8007000 (32-bit, non-prefetchable) [size=2K] Memory at b8000000 (32-bit, non-prefetchable) [size=16K] Capabilities: [44] Power Management version 2 0000:06:01.3 Mass storage controller: Texas Instruments PCIxx21 Integrated FlashMedia Controller Subsystem: QUANTA Computer Inc: Unknown device 0745 Flags: bus master, medium devsel, latency 57, IRQ 10 Memory at b8004000 (32-bit, non-prefetchable) [size=8K] Capabilities: [44] Power Management version 2 0000:06:03.0 Network controller: Intel Corporation PRO/Wireless 2200BG (rev 05) Subsystem: Intel Corporation: Unknown device 2701 Flags: bus master, medium devsel, latency 32, IRQ 169 Memory at b8008000 (32-bit, non-prefetchable) [size=4K] Capabilities: [dc] Power Management version 2 0000:06:08.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) Subsystem: QUANTA Computer Inc: Unknown device 0745 Flags: bus master, medium devsel, latency 32, IRQ 177 I/O ports at 4000 [size=256] Memory at b8007800 (32-bit, non-prefetchable) [size=256] Capabilities: [50] Power Management version 2 0000:00:00.0 0600: 8086:2590 (rev 03) Subsystem: 152d:0745 Flags: bus master, fast devsel, latency 0 Capabilities: [e0] #09 [2109] 0000:00:02.0 0300: 8086:2592 (rev 03) Subsystem: 152d:0745 Flags: bus master, fast devsel, latency 0, IRQ 177 Memory at b0080000 (32-bit, non-prefetchable) [size=512K] I/O ports at 1800 [size=8] Memory at c0000000 (32-bit, prefetchable) [size=256M] Memory at b0000000 (32-bit, non-prefetchable) [size=256K] Capabilities: [d0] Power Management version 2 0000:00:02.1 0380: 8086:2792 (rev 03) Subsystem: 152d:0745 Flags: fast devsel Memory at 32000000 (32-bit, non-prefetchable) [disabled] [size=512K] Capabilities: [d0] Power Management version 2 0000:00:1c.0 0604: 8086:2660 (rev 04) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 Capabilities: [40] #10 [0141] Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0 Enable+ Capabilities: [90] #0d [0000] Capabilities: [a0] Power Management version 2 0000:00:1d.0 0c03: 8086:2658 (rev 04) Subsystem: 152d:0745 Flags: bus master, medium devsel, latency 0, IRQ 217 I/O ports at 1820 [size=32] 0000:00:1d.1 0c03: 8086:2659 (rev 04) Subsystem: 152d:0745 Flags: bus master, medium devsel, latency 0, IRQ 225 I/O ports at 1840 [size=32] 0000:00:1d.2 0c03: 8086:265a (rev 04) Subsystem: 152d:0745 Flags: bus master, medium devsel, latency 0, IRQ 209 I/O ports at 1860 [size=32] 0000:00:1d.3 0c03: 8086:265b (rev 04) Subsystem: 152d:0745 Flags: bus master, medium devsel, latency 0, IRQ 177 I/O ports at 1880 [size=32] 0000:00:1d.7 0c03: 8086:265c (rev 04) (prog-if 20) Subsystem: 152d:0745 Flags: bus master, medium devsel, latency 0, IRQ 217 Memory at b0040000 (32-bit, non-prefetchable) [size=1K] Capabilities: [50] Power Management version 2 Capabilities: [58] #0a [20a0] 0000:00:1e.0 0604: 8086:2448 (rev d4) (prog-if 01) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=06, subordinate=07, sec-latency=216 I/O behind bridge: 00004000-00004fff Memory behind bridge: b8000000-b80fffff Prefetchable memory behind bridge: 0000000030000000-0000000031f00000 Capabilities: [50] #0d [0000] 0000:00:1e.2 0401: 8086:266e (rev 04) Subsystem: 152d:0745 Flags: bus master, medium devsel, latency 0, IRQ 169 I/O ports at 1c00 [size=256] I/O ports at 18c0 [size=64] Memory at b0040800 (32-bit, non-prefetchable) [size=512] Memory at b0040400 (32-bit, non-prefetchable) [size=256] Capabilities: [50] Power Management version 2 0000:00:1e.3 0703: 8086:266d (rev 04) Subsystem: 152d:0745 Flags: medium devsel, IRQ 201 I/O ports at 2400 [size=256] I/O ports at 2000 [size=128] Capabilities: [50] Power Management version 2 0000:00:1f.0 0601: 8086:2641 (rev 04) Subsystem: 152d:0745 Flags: bus master, medium devsel, latency 0 0000:00:1f.1 0101: 8086:266f (rev 04) (prog-if 8a [Master SecP PriP]) Subsystem: 152d:0745 Flags: bus master, medium devsel, latency 0, IRQ 209 I/O ports at I/O ports at I/O ports at I/O ports at I/O ports at 1810 [size=16] 0000:00:1f.3 0c05: 8086:266a (rev 04) Subsystem: 152d:0745 Flags: medium devsel, IRQ 11 I/O ports at 20a0 [size=32] 0000:06:01.0 0607: 104c:8031 Subsystem: 152d:0745 Flags: bus master, medium devsel, latency 168, IRQ 177 Memory at b8006000 (32-bit, non-prefetchable) [size=4K] Bus: primary=06, secondary=07, subordinate=0a, sec-latency=176 Memory window 0: 30000000-31fff000 (prefetchable) Memory window 1: 34000000-35fff000 I/O window 0: 00004400-000044ff I/O window 1: 00004800-000048ff 16-bit legacy interface ports at 0001 0000:06:01.2 0c00: 104c:8032 (prog-if 10) Subsystem: 152d:0745 Flags: bus master, medium devsel, latency 32, IRQ 177 Memory at b8007000 (32-bit, non-prefetchable) [size=2K] Memory at b8000000 (32-bit, non-prefetchable) [size=16K] Capabilities: [44] Power Management version 2 0000:06:01.3 0180: 104c:8033 Subsystem: 152d:0745 Flags: bus master, medium devsel, latency 57, IRQ 10 Memory at b8004000 (32-bit, non-prefetchable) [size=8K] Capabilities: [44] Power Management version 2 0000:06:03.0 0280: 8086:4220 (rev 05) Subsystem: 8086:2701 Flags: bus master, medium devsel, latency 32, IRQ 169 Memory at b8008000 (32-bit, non-prefetchable) [size=4K] Capabilities: [dc] Power Management version 2 0000:06:08.0 0200: 10ec:8139 (rev 10) Subsystem: 152d:0745 Flags: bus master, medium devsel, latency 32, IRQ 177 I/O ports at 4000 [size=256] Memory at b8007800 (32-bit, non-prefetchable) [size=256] Capabilities: [50] Power Management version 2 0 [ICH6 ]: ICH4 - Intel ICH6 Intel ICH6 with unknown codec at 0xb0040800, irq 169 root at axlmachine:~# -- no sound in my laptop https://launchpad.net/malone/bugs/37975 From ep at erichpawlik.de Tue Apr 4 06:36:23 2006 From: ep at erichpawlik.de (Erich Pawlik) Date: Tue, 04 Apr 2006 06:36:23 -0000 Subject: [Bug 31126] Re: Kernel panic after installation of linux-386 [Dapper] References: <20060211062813.25235.10693.malonedeb@gangotri.ubuntu.com> Message-ID: <20060404063623.23108.92139.malone@gandwana.ubuntu.com> To Matt's question: Do you still need a log and if yes, where can I find it? I am not sure whether the installation failed. Synaptic didn't bring up an error. However what happened (and this happened several times on several machines with Hoary and Dapper - I never did get deep into Breezy because I perceived it too buggy): - /boot partition (quite small, I have taken over my partitioning from another distribution that recommends small /boot partitions) is full - The error message occurs when booting into the latest kernel - Booting into older kernel works - After deinstallation of an older kernel version and reinstallation of the latest kernel version, everything is fine. I am not sure whether I like the idea that the installation of the new kernel aborts in case of missing disk space. I rather would prefer that an older kernel version gets deinstalled (I don't need four or five kernel versions, two is enough, the new one and the latest working) Regards Erich -- Kernel panic after installation of linux-386 [Dapper] https://launchpad.net/malone/bugs/31126 From javiermon at gmail.com Tue Apr 4 06:42:55 2006 From: javiermon at gmail.com (kmon) Date: Tue, 04 Apr 2006 06:42:55 -0000 Subject: [Bug 29601] Re: linux-386 boots, but linux-686 doesn't boot. References: <20060124214540.28441.86685.malonedeb@gangotri.ubuntu.com> Message-ID: <20060404064255.23108.67070.malone@gandwana.ubuntu.com> Hi I no longer have this laptop, so I'm afraid I can't help anymore with this bug. If someone else sees this behaviour please help Ben, if not, you can close this bug. Thanxs -- linux-386 boots, but linux-686 doesn't boot. https://launchpad.net/malone/bugs/29601 From steven.w.j.brown at gmail.com Tue Apr 4 06:53:01 2006 From: steven.w.j.brown at gmail.com (Steven Brown) Date: Tue, 04 Apr 2006 06:53:01 -0000 Subject: [Bug 35101] Re: Wacom support completely broken now References: <20060315201206.6537.5926.malonedeb@gangotri.ubuntu.com> Message-ID: <20060404065301.23108.55148.malone@gandwana.ubuntu.com> I'd like to help test this, if possible. I would love for tablet support to be included in Dapper out-of-the-box. Just let me know what I can do. I've dist-upgraded within the last day, which included wacom-tools-0.7.2 (see bug#28846), but my tablet still cannot register pressure in Gimp. :( -- Wacom support completely broken now https://launchpad.net/malone/bugs/35101 From mark at veravirtus.com Tue Apr 4 08:09:44 2006 From: mark at veravirtus.com (Mark Manashirov) Date: Tue, 04 Apr 2006 08:09:44 -0000 Subject: [Bug 22599] Re: enabling DMA on CD-ROMs causes hal failures References: <20060113141913.21012.8978.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060404080944.23108.88102.malone@gandwana.ubuntu.com> Correction: I meant kernel 2.6.15-19. Anyway. I decided to test it with 2.6.16.1 from kernel.org and it's working so I guess it's fixed. -- enabling DMA on CD-ROMs causes hal failures https://launchpad.net/malone/bugs/22599 From steven.w.j.brown at gmail.com Tue Apr 4 08:22:58 2006 From: steven.w.j.brown at gmail.com (Steven Brown) Date: Tue, 04 Apr 2006 08:22:58 -0000 Subject: [Bug 35101] Re: Wacom support completely broken now References: <20060315201206.6537.5926.malonedeb@gangotri.ubuntu.com> Message-ID: <20060404082258.23082.5461.malone@gandwana.ubuntu.com> I'd like to help test this, if possible. I would love for tablet support to be included in Dapper out-of-the-box. Just let me know what I can do. I've dist-upgraded within the last day, which included wacom-tools-0.7.2 (see bug#28846), but my tablet still cannot register pressure in Gimp. :( -- Wacom support completely broken now https://launchpad.net/malone/bugs/35101 From frlinux at gmail.com Tue Apr 4 09:05:23 2006 From: frlinux at gmail.com (FRLinux) Date: Tue, 04 Apr 2006 09:05:23 -0000 Subject: [Bug 37862] kernel panic on IRQ allocation References: <20060403125606.25836.84932.malonedeb@gangotri.ubuntu.com> Message-ID: <20060404090523.25836.34864.launchpad@canonical@gangotri.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: Brand new install of Dapper flight6 on a Sony Vaio laptop (VGN-S5M/S) with latest BIOS. All the install went fine but on reboot, even with options such as pci=noacpi noapic, the laptop kernel panics on IRQ routing. Note: the original reporter indicated the bug was in package 'linux-image-2.6'; however, that package was not published in Ubuntu. Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: Brand new install of Dapper flight6 on a Sony Vaio laptop (VGN-S5M/S) with latest BIOS. All the install went fine but on reboot, even with options such as pci=noacpi noapic, the laptop kernel panics on IRQ routing. Note: the original reporter indicated the bug was in package 'linux-image-2.6'; however, that package was not published in Ubuntu. -- kernel panic on IRQ allocation https://launchpad.net/malone/bugs/37862 From viriiguy at gmail.com Tue Apr 4 09:10:36 2006 From: viriiguy at gmail.com (ViriiGuy) Date: Tue, 04 Apr 2006 09:10:36 -0000 Subject: [Bug 37765] No matter what it simply will not connect. It scan and sees the networks, but it cannot connect. References: <20060402194212.5415.86136.malonedeb@gangotri.ubuntu.com> Message-ID: <20060404091036.23082.92030.launchpad@canonical@gandwana.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: I am using a Broadcom 4306 wireless card in my Emachines M6805 laptop. I have installed fwcutter and used it to load the needed files. I can scan and see my wireless networks.. One is only secured by MAC address and one is secured by 128bit WEP. But I cannot connect to either. I then installed Network manager and nm-applet. I commented out my metwork devices as instructed and it is working fine. It sees my wireless networks, but again simply cannot connect. On the WEP secured network, it will ask me for the key. I put it in and it never connects. On the MAC Secured network, it doe snot ask for a key but again it cannot connect. I have included a text file with the various log snippits I have been asked for on the forums. Ok I cannot find the upload button, but here is the text. dmesg | grep ipw Nothing returned dmesg |grep eth0 Code: [4294710.548000] ADDRCONF(NETDEV_UP): eth0: link is not ready dmesg | grep ieee80211 Code: [4294691.427000] ieee80211_crypt: registered algorithm 'NULL' [4294691.441000] ieee80211: 802.11 data/management/control stack, git-1.1.7 [4294691.441000] ieee80211: Copyright (C) 2004-2005 Intel Corporation lsmod | grep ipw Nothing returned. route -n Code: Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1 0.0.0.0 192.168.1.1 0.0.0.0 UG 0 0 0 eth1 contents of ls /lib/firmware/`uname -r` Code: acx bcm43xx_initval05.fw atmel_at76c502_3com.bin bcm43xx_initval06.fw atmel_at76c502_3com-wpa.bin bcm43xx_initval07.fw atmel_at76c502.bin bcm43xx_initval09.fw atmel_at76c502d.bin bcm43xx_initval10.fw atmel_at76c502d-wpa.bin bcm43xx_microcode2.fw atmel_at76c502e.bin bcm43xx_microcode4.fw atmel_at76c502e-wpa.bin bcm43xx_microcode5.fw atmel_at76c502-wpa.bin bcm43xx_pcm4.fw atmel_at76c503-i3861.bin bcm43xx_pcm5.fw atmel_at76c503-i3863.bin ipw2100-1.3.fw atmel_at76c503-rfmd-0.90.2-140.bin ipw2100-1.3-i.fw atmel_at76c503-rfmd- acc.bin ipw2100-1.3-p.fw atmel_at76c503-rfmd.bin ipw2200-bss.fw atmel_at76c504_2958-wpa.bin ipw2200-ibss.fw atmel_at76c504a_2958-wpa.bin ipw2200-sniffer.fw atmel_at76c504.bin isl3890 atmel_at76c504c-wpa.bin zd1211b-WS11Ub.fw atmel_at76c505a-rfmd2958.bin zd1211b-WS11UPh.fw atmel_at76c505-rfmd2958.bin zd1211b-WS11UPhm.fw atmel_at76c505-rfmd.bin zd1211b-WS11UPhR.fw atmel_at76c506.bin zd1211b-WS11Ur.fw atmel_at76c506-wpa.bin zd1211-WS11Ub.fw bcm43xx_initval01.fw zd1211-WS11UPh.fw bcm43xx_initval02.fw zd1211-WS11UPhm.fw bcm43xx_initval03.fw zd1211-WS11UPhR.fw bcm43xx_initval04.fw zd1211-WS11Ur.fw iwconfig Code: lo no wireless extensions. eth0 IEEE 802.11b/g ESSID:off/any Nickname:"Broadcom 4306" Mode:Managed Frequency=2.437 GHz Access Point: Invalid Bit Rate=54 Mb/s Tx-Power=15 dBm RTS thr:off Fragment thr:off eth1 no wireless extensions. sit0 no wireless extensions. iwlist eth0 scan Code: eth0 Scan completed : Cell 01 - Address: 00:13:10:4B:FD:18 ESSID:"Sneezer" Protocol:IEEE 802.11g Mode:Master Channel:6 Encryption key:on Bit Rates:54 Mb/s Extra: Rates (Mb/s): 1 2 5.5 6 9 11 12 18 24 36 48 54 Quality=100/100 Signal level=-32 dBm Extra: Last beacon: 8ms ago Cell 02 - Address: 00:0F:3D:5A:3A:C0 ESSID:"default" Protocol:IEEE 802.11bg Mode:Master Channel:6 Encryption key:on Bit Rates:54 Mb/s Extra: Rates (Mb/s): 1 2 5.5 6 9 11 12 18 24 36 48 54 Quality=100/100 Signal level=-80 dBm Extra: Last beacon: 5716ms ago ping 192.168.1.1 Code: PING 192.168.1.1 (192.168.1.1) 56(84) bytes of data. 64 bytes from 192.168.1.1: icmp_seq=1 ttl=64 time=1.81 ms 64 bytes from 192.168.1.1: icmp_seq=2 ttl=64 time=0.783 ms 64 bytes from 192.168.1.1: icmp_seq=3 ttl=64 time=0.730 ms 64 bytes from 192.168.1.1: icmp_seq=4 ttl=64 time=0.730 ms 64 bytes from 192.168.1.1: icmp_seq=5 ttl=64 time=0.728 ms 64 bytes from 192.168.1.1: icmp_seq=6 ttl=64 time=0.718 ms 64 bytes from 192.168.1.1: icmp_seq=7 ttl=64 time=0.719 ms 64 bytes from 192.168.1.1: icmp_seq=8 ttl=64 time=0.790 ms 64 bytes from 192.168.1.1: icmp_seq=9 ttl=64 time=0.716 ms 64 bytes from 192.168.1.1: icmp_seq=10 ttl=64 time=0.717 ms 64 bytes from 192.168.1.1: icmp_seq=11 ttl=64 time=0.720 ms 64 bytes from 192.168.1.1: icmp_seq=12 ttl=64 time=0.718 ms 64 bytes from 192.168.1.1: icmp_seq=13 ttl=64 time=0.706 ms Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: I am using a Broadcom 4306 wireless card in my Emachines M6805 laptop. I have installed fwcutter and used it to load the needed files. I can scan and see my wireless networks.. One is only secured by MAC address and one is secured by 128bit WEP. But I cannot connect to either. I then installed Network manager and nm-applet. I commented out my metwork devices as instructed and it is working fine. It sees my wireless networks, but again simply cannot connect. On the WEP secured network, it will ask me for the key. I put it in and it never connects. On the MAC Secured network, it doe snot ask for a key but again it cannot connect. I have included a text file with the various log snippits I have been asked for on the forums. Ok I cannot find the upload button, but here is the text. dmesg | grep ipw Nothing returned dmesg |grep eth0 Code: [4294710.548000] ADDRCONF(NETDEV_UP): eth0: link is not ready dmesg | grep ieee80211 Code: [4294691.427000] ieee80211_crypt: registered algorithm 'NULL' [4294691.441000] ieee80211: 802.11 data/management/control stack, git-1.1.7 [4294691.441000] ieee80211: Copyright (C) 2004-2005 Intel Corporation lsmod | grep ipw Nothing returned. route -n Code: Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1 0.0.0.0 192.168.1.1 0.0.0.0 UG 0 0 0 eth1 contents of ls /lib/firmware/`uname -r` Code: acx bcm43xx_initval05.fw atmel_at76c502_3com.bin bcm43xx_initval06.fw atmel_at76c502_3com-wpa.bin bcm43xx_initval07.fw atmel_at76c502.bin bcm43xx_initval09.fw atmel_at76c502d.bin bcm43xx_initval10.fw atmel_at76c502d-wpa.bin bcm43xx_microcode2.fw atmel_at76c502e.bin bcm43xx_microcode4.fw atmel_at76c502e-wpa.bin bcm43xx_microcode5.fw atmel_at76c502-wpa.bin bcm43xx_pcm4.fw atmel_at76c503-i3861.bin bcm43xx_pcm5.fw atmel_at76c503-i3863.bin ipw2100-1.3.fw atmel_at76c503-rfmd-0.90.2-140.bin ipw2100-1.3-i.fw atmel_at76c503-rfmd- acc.bin ipw2100-1.3-p.fw atmel_at76c503-rfmd.bin ipw2200-bss.fw atmel_at76c504_2958-wpa.bin ipw2200-ibss.fw atmel_at76c504a_2958-wpa.bin ipw2200-sniffer.fw atmel_at76c504.bin isl3890 atmel_at76c504c-wpa.bin zd1211b-WS11Ub.fw atmel_at76c505a-rfmd2958.bin zd1211b-WS11UPh.fw atmel_at76c505-rfmd2958.bin zd1211b-WS11UPhm.fw atmel_at76c505-rfmd.bin zd1211b-WS11UPhR.fw atmel_at76c506.bin zd1211b-WS11Ur.fw atmel_at76c506-wpa.bin zd1211-WS11Ub.fw bcm43xx_initval01.fw zd1211-WS11UPh.fw bcm43xx_initval02.fw zd1211-WS11UPhm.fw bcm43xx_initval03.fw zd1211-WS11UPhR.fw bcm43xx_initval04.fw zd1211-WS11Ur.fw iwconfig Code: lo no wireless extensions. eth0 IEEE 802.11b/g ESSID:off/any Nickname:"Broadcom 4306" Mode:Managed Frequency=2.437 GHz Access Point: Invalid Bit Rate=54 Mb/s Tx-Power=15 dBm RTS thr:off Fragment thr:off eth1 no wireless extensions. sit0 no wireless extensions. iwlist eth0 scan Code: eth0 Scan completed : Cell 01 - Address: 00:13:10:4B:FD:18 ESSID:"Sneezer" Protocol:IEEE 802.11g Mode:Master Channel:6 Encryption key:on Bit Rates:54 Mb/s Extra: Rates (Mb/s): 1 2 5.5 6 9 11 12 18 24 36 48 54 Quality=100/100 Signal level=-32 dBm Extra: Last beacon: 8ms ago Cell 02 - Address: 00:0F:3D:5A:3A:C0 ESSID:"default" Protocol:IEEE 802.11bg Mode:Master Channel:6 Encryption key:on Bit Rates:54 Mb/s Extra: Rates (Mb/s): 1 2 5.5 6 9 11 12 18 24 36 48 54 Quality=100/100 Signal level=-80 dBm Extra: Last beacon: 5716ms ago ping 192.168.1.1 Code: PING 192.168.1.1 (192.168.1.1) 56(84) bytes of data. 64 bytes from 192.168.1.1: icmp_seq=1 ttl=64 time=1.81 ms 64 bytes from 192.168.1.1: icmp_seq=2 ttl=64 time=0.783 ms 64 bytes from 192.168.1.1: icmp_seq=3 ttl=64 time=0.730 ms 64 bytes from 192.168.1.1: icmp_seq=4 ttl=64 time=0.730 ms 64 bytes from 192.168.1.1: icmp_seq=5 ttl=64 time=0.728 ms 64 bytes from 192.168.1.1: icmp_seq=6 ttl=64 time=0.718 ms 64 bytes from 192.168.1.1: icmp_seq=7 ttl=64 time=0.719 ms 64 bytes from 192.168.1.1: icmp_seq=8 ttl=64 time=0.790 ms 64 bytes from 192.168.1.1: icmp_seq=9 ttl=64 time=0.716 ms 64 bytes from 192.168.1.1: icmp_seq=10 ttl=64 time=0.717 ms 64 bytes from 192.168.1.1: icmp_seq=11 ttl=64 time=0.720 ms 64 bytes from 192.168.1.1: icmp_seq=12 ttl=64 time=0.718 ms 64 bytes from 192.168.1.1: icmp_seq=13 ttl=64 time=0.706 ms -- No matter what it simply will not connect. It scan and sees the networks, but it cannot connect. https://launchpad.net/malone/bugs/37765 From goldenear at free.fr Tue Apr 4 09:14:20 2006 From: goldenear at free.fr (goldenear) Date: Tue, 04 Apr 2006 09:14:20 -0000 Subject: [Bug 37680] nfs + vlan = kernel panic References: <20060402033252.23707.34124.malonedeb@gandwana.ubuntu.com> Message-ID: <20060404091420.23082.98754.launchpad@canonical@gandwana.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: I'm running a NFS server under ubuntu 5.10 (recent apt-get upgrade). this server is connected to different networks using 802.1q VLANs (a switch separates the VLANs into différent physical LANs). The issue is that the server crash in this configuration (Kernel Panic). when disabling VLANs everything works OK. Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: I'm running a NFS server under ubuntu 5.10 (recent apt-get upgrade). this server is connected to different networks using 802.1q VLANs (a switch separates the VLANs into différent physical LANs). The issue is that the server crash in this configuration (Kernel Panic). when disabling VLANs everything works OK. -- nfs + vlan = kernel panic https://launchpad.net/malone/bugs/37680 From cjwatson at canonical.com Tue Apr 4 09:05:23 2006 From: cjwatson at canonical.com (Colin Watson) Date: Tue, 04 Apr 2006 09:05:23 -0000 Subject: [Bug 37862] Re: kernel panic on IRQ allocation References: <20060403125606.25836.84932.malonedeb@gangotri.ubuntu.com> Message-ID: <20060404090523.25836.10008.launchpad@gangotri.ubuntu.com> ** Changed in: Ubuntu Sourcepackagename: None => linux-source-2.6.15 -- kernel panic on IRQ allocation https://launchpad.net/malone/bugs/37862 From mjg59 at codon.org.uk Tue Apr 4 09:08:33 2006 From: mjg59 at codon.org.uk (Matthew Garrett) Date: Tue, 04 Apr 2006 09:08:33 -0000 Subject: [Bug 33855] Re: A new Panasonic ACPI driver is required for kernel-2.6.15 References: <20060306024325.22115.48779.malonedeb@gandwana.ubuntu.com> Message-ID: <20060404090833.25863.27019.malone@gangotri.ubuntu.com> No, the acpi_fakekey behaviour is entirely correct. acpi_fakekey generates kernel keycodes. These are then heavily remapped by the kernel before they hit X, which then remaps them further. -- A new Panasonic ACPI driver is required for kernel-2.6.15 https://launchpad.net/malone/bugs/33855 From cjwatson at canonical.com Tue Apr 4 09:10:36 2006 From: cjwatson at canonical.com (Colin Watson) Date: Tue, 04 Apr 2006 09:10:36 -0000 Subject: [Bug 37765] Re: No matter what it simply will not connect. It scan and sees the networks, but it cannot connect. References: <20060402194212.5415.86136.malonedeb@gangotri.ubuntu.com> Message-ID: <20060404091036.23082.39628.launchpad@gandwana.ubuntu.com> ** Changed in: bcm43xx-fwcutter (Ubuntu) Sourcepackagename: bcm43xx-fwcutter => linux-source-2.6.15 Binarypackagename: bcm43xx-fwcutter => None -- No matter what it simply will not connect. It scan and sees the networks, but it cannot connect. https://launchpad.net/malone/bugs/37765 From cjwatson at canonical.com Tue Apr 4 09:14:56 2006 From: cjwatson at canonical.com (Colin Watson) Date: Tue, 04 Apr 2006 09:14:56 -0000 Subject: [Bug 37680] Re: nfs + vlan = kernel panic References: <20060402033252.23707.34124.malonedeb@gandwana.ubuntu.com> Message-ID: <20060404091456.23108.88001.malone@gandwana.ubuntu.com> Can you attach the backtrace of the kernel panic (you'll probably find it in /var/log/syslog) to this bug, please? ** Changed in: Ubuntu Sourcepackagename: None => linux-source-2.6.15 ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Unconfirmed => Needs Info -- nfs + vlan = kernel panic https://launchpad.net/malone/bugs/37680 From anthony_guichard at hotmail.fr Tue Apr 4 09:25:03 2006 From: anthony_guichard at hotmail.fr (Louis XVI with a gun) Date: Tue, 04 Apr 2006 09:25:03 -0000 Subject: [Bug 37472] the keyboard don't work perfectly on laptops acer travelmate 2300 series with Dapper References: <20060331122206.23707.692.malonedeb@gandwana.ubuntu.com> Message-ID: <20060404092503.23082.37198.launchpad@canonical@gandwana.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Needs Info Description: The keyboard is capricious, it often refuses to type a letter or when one presses once on the key, there leaves three times the same letter . There are no particulars conditions so that that occurs , it ' s permanent Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Needs Info Description: The keyboard is capricious, it often refuses to type a letter or when one presses once on the key, there leaves three times the same letter . There are no particulars conditions so that that occurs , it ' s permanent -- the keyboard don't work perfectly on laptops acer travelmate 2300 series with Dapper https://launchpad.net/malone/bugs/37472 From vetsel.patrice at wanadoo.fr Tue Apr 4 09:19:09 2006 From: vetsel.patrice at wanadoo.fr (VETSEL Patrice) Date: Tue, 04 Apr 2006 09:19:09 -0000 Subject: [Bug 37472] Re: the keyboard don't work perfectly on laptops acer travelmate 2300 series with Dapper References: <20060331122206.23707.692.malonedeb@gandwana.ubuntu.com> Message-ID: <20060404091910.23082.46886.launchpad@gandwana.ubuntu.com> ** Changed in: Ubuntu Sourcepackagename: None => acpi-support -- the keyboard don't work perfectly on laptops acer travelmate 2300 series with Dapper https://launchpad.net/malone/bugs/37472 From mjg59 at codon.org.uk Tue Apr 4 09:25:03 2006 From: mjg59 at codon.org.uk (Matthew Garrett) Date: Tue, 04 Apr 2006 09:25:03 -0000 Subject: [Bug 37472] Re: the keyboard don't work perfectly on laptops acer travelmate 2300 series with Dapper References: <20060331122206.23707.692.malonedeb@gandwana.ubuntu.com> Message-ID: <20060404092503.23082.75060.launchpad@gandwana.ubuntu.com> ** Changed in: acpi-support (Ubuntu) Sourcepackagename: acpi-support => linux-source-2.6.15 -- the keyboard don't work perfectly on laptops acer travelmate 2300 series with Dapper https://launchpad.net/malone/bugs/37472 From mathieu.perona at ens.fr Tue Apr 4 09:22:45 2006 From: mathieu.perona at ens.fr (Mathieu Perona) Date: Tue, 04 Apr 2006 09:22:45 -0000 Subject: [Bug 17899] Re: Ubuntu (Breezy) freezes after wireless config change (ndiswrapper) References: <20060113135349.21012.61976.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060404092245.23108.46994.malone@gandwana.ubuntu.com> Same thing with the Netgear WG511 card, with the Marvel chipset. The reason of your freeze is probably a kernel Oops (I get one each time), so rebooting is indeed the best thing to do. Part of the problem (this is a wild guess) that the ndisgtk frontend does not do the depmod -a before loading the ndiswrapper module. I have had this bug since 2.6.15-12, and still have in one on my machines on 2.6.15-19. I managed to get rid of on the other machine (same installation, same card), but I do not remember how. -- Ubuntu (Breezy) freezes after wireless config change (ndiswrapper) https://launchpad.net/malone/bugs/17899 From doko at ubuntu.com Tue Apr 4 10:07:43 2006 From: doko at ubuntu.com (Matthias Klose) Date: Tue, 04 Apr 2006 10:07:43 -0000 Subject: [Bug 38000] xserver-xorg-driver-ati needs radeon kernel module v1.23, finds 1.19 only References: <20060404100743.23108.60998.malonedeb@gandwana.ubuntu.com> Message-ID: <20060404100743.23108.60998.malonedeb@gandwana.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: current dapper from 2006-04-04 (II) RADEON(0): Will try to use DMA for Xv image transfers (WW) RADEON(0): [dri] limiting video memory to one aperture of 65536K (WW) RADEON(0): [dri] detected radeon kernel module version 1.19 but 1.23 or newer is required for full memory mapping. (II) RADEON(0): Detected total video RAM=131072K, accessible=65536K (PCI BAR=131072K) (--) RADEON(0): Mapped VideoRAM: 65536 kByte (128 bit DDR SDRAM) -- xserver-xorg-driver-ati needs radeon kernel module v1.23, finds 1.19 only https://launchpad.net/malone/bugs/38000 From lukasz.halman at gmail.com Tue Apr 4 10:08:06 2006 From: lukasz.halman at gmail.com (=?utf-8?q?=C5=81ukasz_Halman?=) Date: Tue, 04 Apr 2006 10:08:06 -0000 Subject: [Bug 37132] Re: [Bug 37132] Re: Fan non-stop on after long suspend - MSI S260 References: <20060329082822.7863.46602.malonedeb@gangotri.ubuntu.com> <20060403104658.23707.46485.malone@gandwana.ubuntu.com> Message-ID: <846cb8c00604040308w360bce34i83e8c53f4ab245d6@mail.gmail.com> That's right. I'm trying to figure out what is causing this, because I didn't do any updates and it stopped working. I suspect my X.org configuration I messed with recently. I'll try to revert these changes and come up with overall status. -- Fan non-stop on after long suspend - MSI S260 https://launchpad.net/malone/bugs/37132 From andrew.conkling at gmail.com Tue Apr 4 10:36:24 2006 From: andrew.conkling at gmail.com (Andrew Conkling) Date: Tue, 04 Apr 2006 10:36:24 -0000 Subject: [Bug 37472] Re: the keyboard don't work perfectly on laptops acer travelmate 2300 series with Dapper References: <20060331122206.23707.692.malonedeb@gandwana.ubuntu.com> Message-ID: <20060404103624.23108.87856.malone@gandwana.ubuntu.com> Can you confirm whether or not this happens on another distribution of Linux or a different OS? Somehow this doesn't sound like an Ubuntu bug.... -- the keyboard don't work perfectly on laptops acer travelmate 2300 series with Dapper https://launchpad.net/malone/bugs/37472 From anthony_guichard at hotmail.fr Tue Apr 4 10:53:51 2006 From: anthony_guichard at hotmail.fr (Louis XVI with a gun) Date: Tue, 04 Apr 2006 10:53:51 -0000 Subject: [Bug 37472] RE: [Bug 37472] Re: the keyboard don't work perfectly on laptops acertravelmate References: <20060331122206.23707.692.malonedeb@gandwana.ubuntu.com> <20060404103624.23108.87856.malone@gandwana.ubuntu.com> Message-ID: I have this problem only on ubuntu dapper drake . On suse , mandrake , ubuntu 5.10 I didn ' t have this problem . When my travelmate was powered with ubuntu breezy badger I didn ' t have this problem nb : I stay with dapper because the travelmate have now acpi support maybe it s an acpi problem that affect the keybord ..... _________________________________________________________________ MSN Hotmail : créez votre adresse e-mail gratuite & à vie ! http://www.imagine-msn.com/Messenger/?locale=fr-fr -- the keyboard don't work perfectly on laptops acer travelmate 2300 series with Dapper https://launchpad.net/malone/bugs/37472 From ubuntu-bugs at henrik.synth.no Tue Apr 4 11:09:55 2006 From: ubuntu-bugs at henrik.synth.no (neu) Date: Tue, 04 Apr 2006 11:09:55 -0000 Subject: [Bug 37703] Vanilla linux-image-2.6.15 boots, Ubuntu version doesn't. References: <20060402105649.23733.91763.malonedeb@gandwana.ubuntu.com> Message-ID: <20060404110955.23082.81181.malone@gandwana.ubuntu.com> I downloaded a vanilla linux-2.6.15.7 from kernel.org, and compiled it using the Ubuntu config from /boot/config*. The vanilla kernel boots just fine. There must be something in the Ubuntu patches that causes this crash. -- linux-image-2.6.15 fails to boot on Lifebook B2131 https://launchpad.net/malone/bugs/37703 From ubuntu-bugs at henrik.synth.no Tue Apr 4 11:15:06 2006 From: ubuntu-bugs at henrik.synth.no (neu) Date: Tue, 04 Apr 2006 11:15:06 -0000 Subject: [Bug 37703] Re: linux-image-2.6.15 fails to boot on Lifebook B2131 References: <20060402105649.23733.91763.malonedeb@gandwana.ubuntu.com> Message-ID: <20060404111507.25863.27286.launchpad@gangotri.ubuntu.com> ** Changed in: linux-source-2.6.15 linux-image-2.6.15-19-386 (Ubuntu) Severity: Normal => Critical -- linux-image-2.6.15 fails to boot on Lifebook B2131 https://launchpad.net/malone/bugs/37703 From sam at robots.org.uk Tue Apr 4 11:29:11 2006 From: sam at robots.org.uk (Sam Morris) Date: Tue, 04 Apr 2006 11:29:11 -0000 Subject: [Bug 38012] After plugging in a usb mass storage device, lsb is inoperable References: <20060404112912.25863.88362.malonedeb@gangotri.ubuntu.com> Message-ID: <20060404112912.25863.88362.malonedeb@gangotri.ubuntu.com> Public bug reported: Affects: linux-source-2.6.12 linux-image-2.6.12-10-k7 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: The device is an Xclef HD-500 mp3 player. After plugging it in, I left it for a while but it never showed up as a scsi device. After a while I unplugged it and I got a kernel oops. From then on any program trying to access the usb buss got locked in uninterruptable sleep (for example, CUPS and lsusb). The only way to fix this is to reboot the machine. This happens about one in about three times that I hook the device up to the computer. ** Attachment added: "kernel message log" http://librarian.launchpad.net/1927915/kern.log.0 -- After plugging in a usb mass storage device, lsb is inoperable https://launchpad.net/malone/bugs/38012 From cyrilb856 at gmail.com Tue Apr 4 11:40:11 2006 From: cyrilb856 at gmail.com (marseillai) Date: Tue, 04 Apr 2006 11:40:11 -0000 Subject: [Bug 37589] at boot usb hard drive is not always mount References: <20060401130538.23707.51582.malonedeb@gandwana.ubuntu.com> Message-ID: <20060404114011.25836.18571.launchpad@canonical@gangotri.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Affects: udev (Ubuntu) Severity: Normal Priority: (none set) Status: Rejected Description: at boot udev don't always see my usb hard drive. When he is sleeping udev don't wait he wakes up and doesn't mount it and i have to mount it after the boot. When the hard drive is not sleeping it works fine. In breezy i never had this problem. Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Affects: udev (Ubuntu) Severity: Normal Priority: (none set) Status: Rejected Description: at boot udev don't always see my usb hard drive. When he is sleeping udev don't wait he wakes up and doesn't mount it and i have to mount it after the boot. When the hard drive is not sleeping it works fine. In breezy i never had this problem. -- at boot usb hard drive is not always mount https://launchpad.net/malone/bugs/37589 From martin.pitt at ubuntu.com Tue Apr 4 11:39:43 2006 From: martin.pitt at ubuntu.com (Martin Pitt) Date: Tue, 04 Apr 2006 11:39:43 -0000 Subject: [Bug 37589] Re: at boot usb hard drive is not always mount References: <20060401130538.23707.51582.malonedeb@gandwana.ubuntu.com> Message-ID: <20060404113943.25836.73447.malone@gangotri.ubuntu.com> It should work with your udev and fstab configuration, too; I just wanted to get the debug information under Ubuntu's default configuration. So, if the device is not automatically mounted, and even 'mount' fails to do it, then the cause is really the sleeping, which would again make it a kernel bug. -- cannot mount usb hard drive when it's in sleep mode https://launchpad.net/malone/bugs/37589 From martin.pitt at ubuntu.com Tue Apr 4 11:39:56 2006 From: martin.pitt at ubuntu.com (Martin Pitt) Date: Tue, 04 Apr 2006 11:39:56 -0000 Subject: [Bug 37589] Re: at boot usb hard drive is not always mount References: <20060401130538.23707.51582.malonedeb@gandwana.ubuntu.com> Message-ID: <20060404113956.25836.7721.malone@gangotri.ubuntu.com> Closing udev task ** Changed in: udev (Ubuntu) Status: Unconfirmed => Rejected ** Changed in: hal (Ubuntu) Sourcepackagename: hal => linux-source-2.6.15 Status: Needs Info => Unconfirmed ** Summary changed: - at boot usb hard drive is not always mount + cannot mount usb hard drive when it's in sleep mode -- cannot mount usb hard drive when it's in sleep mode https://launchpad.net/malone/bugs/37589 From ariel.vardi at gmail.com Tue Apr 4 13:52:13 2006 From: ariel.vardi at gmail.com (Ariel Vardi) Date: Tue, 04 Apr 2006 13:52:13 -0000 Subject: [Bug 35319] Re: no Fn at all Vaio SZ1XP Dapper References: <20060317124552.11105.6446.malonedeb@gandwana.ubuntu.com> Message-ID: <20060404135213.25515.30302.malone@gangotri.ubuntu.com> Albert, have you tried suspending your SZ, and then tried the fn keys? It worked for me sometimes... Can you confirm the same behavior on yours? (Suspend somewhat works with the intel chipset) Anyone: Any idea why this is happening? I think not having the fn keys working is a pretty major issue. It's particularly annoying when you're booting gnome in the classroom with the volume at its max and you can't do anything to mute it! :) -- no Fn at all Vaio SZ1XP Dapper https://launchpad.net/malone/bugs/35319 From avilella at gmail.com Tue Apr 4 14:10:46 2006 From: avilella at gmail.com (Albert Vilella) Date: Tue, 04 Apr 2006 14:10:46 -0000 Subject: [Bug 35319] Re: no Fn at all Vaio SZ1XP Dapper References: <20060317124552.11105.6446.malonedeb@gandwana.ubuntu.com> Message-ID: <20060404141046.25515.60502.malone@gangotri.ubuntu.com> The problem is that I cannot use the i810 at all: https://launchpad.net/distros/ubuntu/+source/linux-source-2.6.15/+bug/37884 and the suspend to RAM doesn't work with either nvidia or nv drivers. And yes, it is very inconvenient not being able to use the Fn keys. I don't know if this is a sonypi-only problem, or there are other things messing up here. If anyone knows what else can we report to solve this issue, please say so. About the volume... you can always plug your hearphones before the welcome theme starts :) -- no Fn at all Vaio SZ1XP Dapper https://launchpad.net/malone/bugs/35319 From ariel.vardi at gmail.com Tue Apr 4 14:39:18 2006 From: ariel.vardi at gmail.com (Ariel Vardi) Date: Tue, 04 Apr 2006 14:39:18 -0000 Subject: [Bug 35319] Re: [Bug 35319] Re: no Fn at all Vaio SZ1XP Dapper References: <20060317124552.11105.6446.malonedeb@gandwana.ubuntu.com> <20060404141046.25515.60502.malone@gangotri.ubuntu.com> Message-ID: <1144161558.7210.8.camel@localhost.localdomain> I've just sent an email to the author of Sonypi to see if he could help us on the fn key issue. On Tue, 2006-04-04 at 14:10 +0000, Albert Vilella wrote: > The problem is that I cannot use the i810 at all: > > https://launchpad.net/distros/ubuntu/+source/linux-source-2.6.15/+bug/37884 > > and the suspend to RAM doesn't work with either nvidia or nv drivers. > > And yes, it is very inconvenient not being able to use the Fn keys. I don't know if this is a sonypi-only problem, or there are other things messing up here. If anyone knows what else can we report to solve this issue, please say so. > > About the volume... you can always plug your hearphones before the welcome theme starts :) -- no Fn at all Vaio SZ1XP Dapper https://launchpad.net/malone/bugs/35319 From ariel.vardi at gmail.com Tue Apr 4 14:40:26 2006 From: ariel.vardi at gmail.com (Ariel Vardi) Date: Tue, 04 Apr 2006 14:40:26 -0000 Subject: [Bug 37884] Re: Critical temperature reached (255 C) very soon at boot when using i810 References: <20060403152126.23108.73899.malonedeb@gandwana.ubuntu.com> Message-ID: <20060404144026.25515.94583.malone@gangotri.ubuntu.com> I don't have this bug on my Sony Vaio SZ110. I can boot linux fine and it works even better than with the nvidia chipset -- Critical temperature reached (255 C) very soon at boot when using i810 https://launchpad.net/malone/bugs/37884 From ariel.vardi at gmail.com Tue Apr 4 14:42:15 2006 From: ariel.vardi at gmail.com (Ariel Vardi) Date: Tue, 04 Apr 2006 14:42:15 -0000 Subject: [Bug 37884] Re: Critical temperature reached (255 C) very soon at boot when using i810 References: <20060403152126.23108.73899.malonedeb@gandwana.ubuntu.com> Message-ID: <20060404144215.14649.34380.malone@gandwana.ubuntu.com> what kernel are you using? I'm using the 2.6.15-19 ubuntu package -- Critical temperature reached (255 C) very soon at boot when using i810 https://launchpad.net/malone/bugs/37884 From mdz at ubuntu.com Tue Apr 4 14:48:45 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Tue, 04 Apr 2006 14:48:45 -0000 Subject: [Bug 31126] Re: [Bug 31126] Re: Kernel panic after installation of linux-386 [Dapper] References: <20060211062813.25235.10693.malonedeb@gangotri.ubuntu.com> <20060404063623.23108.92139.malone@gandwana.ubuntu.com> Message-ID: <20060404144845.GM11734@alcor.net> On Tue, Apr 04, 2006 at 06:36:23AM -0000, Erich Pawlik wrote: > To Matt's question: Do you still need a log and if yes, where can I find it? No, thanks. It seems likely that indeed the problem was caused by running out of disk space on /boot, and Adam has acknowledged that that case isn't handled correctly at the moment. > I am not sure whether I like the idea that the installation of the new > kernel aborts in case of missing disk space. I rather would prefer that an > older kernel version gets deinstalled (I don't need four or five kernel > versions, two is enough, the new one and the latest working) It is important to keep the solution simple in these cases in order to maintain robustness; the installation should simply abort. Note that a separate /boot is only needed in very special configurations today (e.g., RAID-5 or LVM root), so in general this should be a rare occurrence. -- - mdz -- Kernel panic after installation of linux-386 [Dapper] https://launchpad.net/malone/bugs/31126 From avilella at gmail.com Tue Apr 4 14:55:10 2006 From: avilella at gmail.com (Albert Vilella) Date: Tue, 04 Apr 2006 14:55:10 -0000 Subject: [Bug 37884] Re: Critical temperature reached (255 C) very soon at boot when using i810 References: <20060403152126.23108.73899.malonedeb@gandwana.ubuntu.com> Message-ID: <20060404145510.25542.64210.malone@gangotri.ubuntu.com> avilella at magneto:~$ uname -a Linux magneto 2.6.15-19-686 #1 SMP PREEMPT Mon Mar 20 17:33:20 UTC 2006 i686 GNU/Linux Maybe this is related to the patched DSDT that I build. If you haven't done that, this may be the only difference between our computers. The thing is that I tried to boot using the Intel chip after taking the patched DSDT out of where it is read: sudo mv /etc/mkinitramfs/DSDT.aml ~/ And again it complained about the Critical Temperature. Is there anything else that should be done to revert the patched DSDT.aml from being used? -- Critical temperature reached (255 C) very soon at boot when using i810 https://launchpad.net/malone/bugs/37884 From ariel.vardi at gmail.com Tue Apr 4 15:09:13 2006 From: ariel.vardi at gmail.com (Ariel Vardi) Date: Tue, 04 Apr 2006 15:09:13 -0000 Subject: [Bug 35319] Re: no Fn at all Vaio SZ1XP Dapper References: <20060317124552.11105.6446.malonedeb@gandwana.ubuntu.com> Message-ID: <20060404150913.14649.58908.malone@gandwana.ubuntu.com> stelian seems to think that we should look into an acpi related issue providing the fact that the keys work after a suspend-to-ram. I don't really know how I could debug this. Paul, could you help us? -- no Fn at all Vaio SZ1XP Dapper https://launchpad.net/malone/bugs/35319 From nickybatts at gmail.com Tue Apr 4 15:26:45 2006 From: nickybatts at gmail.com (Nickybatts) Date: Tue, 04 Apr 2006 15:26:45 -0000 Subject: [Bug 34259] Re: flashing waiting mouse with NVIDIA drivers References: <20060309234822.28582.64475.malonedeb@gandwana.ubuntu.com> Message-ID: <20060404152645.25542.51153.malone@gangotri.ubuntu.com> So the mouse works okay, but the animation is broken with Flight 4? Is this the only problem detected? -- flashing waiting mouse with NVIDIA drivers https://launchpad.net/malone/bugs/34259 From andrew.conkling at gmail.com Tue Apr 4 15:30:16 2006 From: andrew.conkling at gmail.com (Andrew Conkling) Date: Tue, 04 Apr 2006 15:30:16 -0000 Subject: [Bug 37884] Re: Critical temperature reached (255 C) very soon at boot when using i810 References: <20060403152126.23108.73899.malonedeb@gandwana.ubuntu.com> Message-ID: <20060404153016.14649.6931.malone@gandwana.ubuntu.com> Of course you would need to use the official kernel package if you want to file this bug. Reopen if you find this behavior with the 2.6.15 kernel package in Dapper. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Unconfirmed => Rejected -- Critical temperature reached (255 C) very soon at boot when using i810 https://launchpad.net/malone/bugs/37884 From avilella at gmail.com Tue Apr 4 15:50:19 2006 From: avilella at gmail.com (Albert Vilella) Date: Tue, 04 Apr 2006 15:50:19 -0000 Subject: [Bug 37884] Re: Critical temperature reached (255 C) very soon at boot when using i810 References: <20060403152126.23108.73899.malonedeb@gandwana.ubuntu.com> Message-ID: <20060404155019.25515.11254.malone@gangotri.ubuntu.com> Sorry for the misunderstanding: this _happens_ with the official kernel as well. -- Critical temperature reached (255 C) very soon at boot when using i810 https://launchpad.net/malone/bugs/37884 From dan at danfreak.net Tue Apr 4 15:57:44 2006 From: dan at danfreak.net (Daniel Turner) Date: Tue, 04 Apr 2006 15:57:44 -0000 Subject: [Bug 30963] Re: [dapper] snd_powermac does not recognize sound card References: <20060209122327.25235.98036.malonedeb@gangotri.ubuntu.com> Message-ID: <20060404155744.14649.4961.malone@gandwana.ubuntu.com> The soundcard works perfectly on the Flight 6 live CD, but once installed (with expresso) no soundcard found! This is with an iBook G4, 1.0 Ghz. -- [dapper] snd_powermac does not recognize sound card https://launchpad.net/malone/bugs/30963 From ariel.vardi at gmail.com Tue Apr 4 16:08:58 2006 From: ariel.vardi at gmail.com (Ariel Vardi) Date: Tue, 04 Apr 2006 16:08:58 -0000 Subject: [Bug 35319] Re: no Fn at all Vaio SZ1XP Dapper References: <20060317124552.11105.6446.malonedeb@gandwana.ubuntu.com> Message-ID: <20060404160858.25515.43434.malone@gangotri.ubuntu.com> I ran a little test. 1) Booted the OS, tried the fn keys while reading /proc/acpi/event - no output at all 2) Suspended to ram the laptop, and tried again - no output at all 3) Suspended once more, don't think I did anything different than the first time - a new line for each fn key pressed: sony/hotkey SPIC 00000001 0000003b sony/hotkey SPIC 00000001 00000014 sony/hotkey SPIC 00000001 0000003b sony/hotkey SPIC 00000001 00000015 sony/hotkey SPIC 00000001 0000003b sony/hotkey SPIC 00000001 00000015 sony/hotkey SPIC 00000001 0000003b sony/hotkey SPIC 00000001 00000016 sony/hotkey SPIC 00000001 0000003b sony/hotkey SPIC 00000001 00000017 sony/hotkey SPIC 00000001 00000017 sony/hotkey SPIC 00000001 0000000c sony/hotkey SPIC 00000001 0000003b sony/hotkey SPIC 00000001 0000000d sony/hotkey SPIC 00000001 0000003b sony/hotkey SPIC 00000001 0000000e sony/hotkey SPIC 00000001 0000003b Anyone has any idea why suspending the laptop affects the behavior of the fn keys? -- no Fn at all Vaio SZ1XP Dapper https://launchpad.net/malone/bugs/35319 From ariel.vardi at gmail.com Tue Apr 4 16:11:35 2006 From: ariel.vardi at gmail.com (Ariel Vardi) Date: Tue, 04 Apr 2006 16:11:35 -0000 Subject: [Bug 35319] Re: no Fn at all Vaio SZ1XP Dapper References: <20060317124552.11105.6446.malonedeb@gandwana.ubuntu.com> Message-ID: <20060404161136.14649.85759.malone@gandwana.ubuntu.com> - sonypi maintainer says it's probably acpi related as the keys work after a suspend-to-ram. - This bug is more than minor as it prevents the use of this laptop in a professional environment where quickly muting the sound or changing the brightness to save battery can be critical. ** Changed in: linux-source-2.6.15 (Ubuntu) Severity: Minor => Normal Status: Needs Info => Confirmed -- no Fn at all Vaio SZ1XP Dapper https://launchpad.net/malone/bugs/35319 From zzking at free.fr Tue Apr 4 16:44:45 2006 From: zzking at free.fr (gerard) Date: Tue, 04 Apr 2006 16:44:45 -0000 Subject: [Bug 33934] USB key works in Breezy not in Dapper References: <20060306212812.9003.74492.malonedeb@gandwana.ubuntu.com> Message-ID: <20060404164445.14649.90763.launchpad@canonical@gandwana.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: Here is the analysis I made regarding this strange behaviour. From: System > Admin > Disks Under Breezy storage list: hard disk properties: USB BAR 250 MiB /dev/sda partition: partition 1 periph: /dev/sda1 file system: vfat access path: /media/usbdisk size: 243 MiB Under Dapper: storage list: hard disk properties: unknown /dev/fd0 partition: there aren't known partition in the disk My interrogations: 1- Why doesn't Dapper recognize an existing partition seen under Breezy? 2- Why is the device called /dev/fd0 (fd as floppy disk?) under Dapper and a more appropriate /dev/sda1 under Breezy? Any chance to solve that please? I saw other people w/ the same problem on the Ubuntu-fr.org forum, so it's not an isolated case, please help, Thx. Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: Here is the analysis I made regarding this strange behaviour. From: System > Admin > Disks Under Breezy storage list: hard disk properties: USB BAR 250 MiB /dev/sda partition: partition 1 periph: /dev/sda1 file system: vfat access path: /media/usbdisk size: 243 MiB Under Dapper: storage list: hard disk properties: unknown /dev/fd0 partition: there aren't known partition in the disk My interrogations: 1- Why doesn't Dapper recognize an existing partition seen under Breezy? 2- Why is the device called /dev/fd0 (fd as floppy disk?) under Dapper and a more appropriate /dev/sda1 under Breezy? Any chance to solve that please? I saw other people w/ the same problem on the Ubuntu-fr.org forum, so it's not an isolated case, please help, Thx. -- USB key works in Breezy not in Dapper https://launchpad.net/malone/bugs/33934 From scott at ubuntu.com Tue Apr 4 16:44:44 2006 From: scott at ubuntu.com (Scott James Remnant) Date: Tue, 04 Apr 2006 16:44:44 -0000 Subject: [Bug 33934] Re: USB key works in Breezy not in Dapper References: <20060306212812.9003.74492.malonedeb@gandwana.ubuntu.com> Message-ID: <20060404164445.14649.13398.malone@gandwana.ubuntu.com> Then this is a kernel bug ... Ben, no events received when their "faulty" USB key is plugged in; yet it works on breezy. ** Changed in: udev (Ubuntu) Sourcepackagename: udev => linux-source-2.6.15 Assignee: Scott James Remnant => (unassigned) Status: Needs Info => Unconfirmed -- USB key works in Breezy not in Dapper https://launchpad.net/malone/bugs/33934 From andrew.conkling at gmail.com Tue Apr 4 16:47:39 2006 From: andrew.conkling at gmail.com (Andrew Conkling) Date: Tue, 04 Apr 2006 16:47:39 -0000 Subject: [Bug 37884] Re: Critical temperature reached (255 C) very soon at boot when using i810 References: <20060403152126.23108.73899.malonedeb@gandwana.ubuntu.com> Message-ID: <20060404164739.14572.94597.malone@gandwana.ubuntu.com> Ah, OK. Reopening then. ;) And I'm going to take the liberty to bump up the severity as well, since temperature is a big deal. ** Changed in: linux-source-2.6.15 (Ubuntu) Severity: Normal => Major Status: Rejected => Unconfirmed -- Critical temperature reached (255 C) very soon at boot when using i810 https://launchpad.net/malone/bugs/37884 From zzking at free.fr Tue Apr 4 16:59:20 2006 From: zzking at free.fr (gerard) Date: Tue, 04 Apr 2006 16:59:20 -0000 Subject: [Bug 33934] Re: [Bug 33934] Re: USB key works in Breezy not in Dapper References: <20060306212812.9003.74492.malonedeb@gandwana.ubuntu.com> <20060404164445.14649.13398.malone@gandwana.ubuntu.com> Message-ID: <4432A5E8.5030409@free.fr> Thx for the follow-up and ... the solution .... maybe!! (I hope !) Scott James Remnant a écrit : > Then this is a kernel bug ... Ben, no events received when their "faulty" USB key is plugged in; yet it works on breezy. > > ** Changed in: udev (Ubuntu) > Sourcepackagename: udev => linux-source-2.6.15 > Assignee: Scott James Remnant => (unassigned) > Status: Needs Info => Unconfirmed > -- USB key works in Breezy not in Dapper https://launchpad.net/malone/bugs/33934 From martin.pitt at ubuntu.com Tue Apr 4 17:14:33 2006 From: martin.pitt at ubuntu.com (Martin Pitt) Date: Tue, 04 Apr 2006 17:14:33 -0000 Subject: [Bug 30963] Re: [Bug 30963] Re: [dapper] snd_powermac does not recognize sound card References: <20060209122327.25235.98036.malonedeb@gangotri.ubuntu.com> <20060404155744.14649.4961.malone@gandwana.ubuntu.com> Message-ID: <20060404171433.GA5587@piware.de> Hi, Daniel Turner [2006-04-04 15:57 -0000]: > The soundcard works perfectly on the Flight 6 live CD, but once > installed (with expresso) no soundcard found! This is with an iBook > G4, 1.0 Ghz. [dapper] snd_powermac does not recognize sound card > https://launchpad.net/malone/bugs/30963 Does /etc/modules contain snd_powermac? Martin -- [dapper] snd_powermac does not recognize sound card https://launchpad.net/malone/bugs/30963 From tskisner.public at gmail.com Tue Apr 4 17:22:29 2006 From: tskisner.public at gmail.com (TedKisner) Date: Tue, 04 Apr 2006 17:22:29 -0000 Subject: [Bug 33855] Re: A new Panasonic ACPI driver is required for kernel-2.6.15 References: <20060306024325.22115.48779.malonedeb@gandwana.ubuntu.com> Message-ID: <20060404172229.25515.98772.malone@gangotri.ubuntu.com> yes, sorry- I didn't look at the acpi_fakekey source before posting, I see now that it just generates kernel input events. So the problem is with the kernel to X keymap conversion. Perhaps this is just a laptop-specific issue that we will have to deal with on the wiki page. Thanks for the feedback. -Ted -- A new Panasonic ACPI driver is required for kernel-2.6.15 https://launchpad.net/malone/bugs/33855 From mjg59 at codon.org.uk Tue Apr 4 17:54:58 2006 From: mjg59 at codon.org.uk (Matthew Garrett) Date: Tue, 04 Apr 2006 17:54:58 -0000 Subject: [Bug 33855] Re: A new Panasonic ACPI driver is required for kernel-2.6.15 References: <20060306024325.22115.48779.malonedeb@gandwana.ubuntu.com> Message-ID: <20060404175458.14649.19209.malone@gandwana.ubuntu.com> No, there *is* *no* *problem*. Kernel keycode get remapped to X keycodes. The mapping is consistent. That's fine. The only issue is over having X tie those to appropriate keysyms. -- A new Panasonic ACPI driver is required for kernel-2.6.15 https://launchpad.net/malone/bugs/33855 From mdz at ubuntu.com Tue Apr 4 17:52:54 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Tue, 04 Apr 2006 17:52:54 -0000 Subject: [Bug 32334] Re: Doesn't work correctly with xorg's Xinerama. References: <20060221173747.23543.11263.malonedeb@gandwana.ubuntu.com> Message-ID: <20060404175254.14649.82165.launchpad@gandwana.ubuntu.com> ** Changed in: linux-source-2.6.15 linux-image-2.6.15-16-686 (Ubuntu) Sourcepackagename: linux-source-2.6.15 => xorg Binarypackagename: linux-image-2.6.15-16-686 => None Status: Unconfirmed => Confirmed -- Doesn't work correctly with xorg's Xinerama. https://launchpad.net/malone/bugs/32334 From djturner at blueyonder.co.uk Tue Apr 4 18:28:04 2006 From: djturner at blueyonder.co.uk (Trip) Date: Tue, 04 Apr 2006 18:28:04 -0000 Subject: [Bug 38058] Everything locks up References: <20060404181106.25542.45586.malonedeb@gangotri.ubuntu.com> Message-ID: <20060404182804.25542.10749.launchpad@canonical@gangotri.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 ekiga (Ubuntu) Severity: Normal Priority: (none set) Assignee: Ubuntu Kernel Team Status: Unconfirmed Description: Upgraded from Breezy to Dapper 6.06, Kernel 2.6.15-19-386, Senston is the name of the webcam (only thing written on it). It's a night cam with 6 led's inside & a light sensor, if that makes any difference? Webcam seems to work fine with Wengo Phone (not fully tested in call yet, but it displays fine in preference's), but 9 times out of 10 fully locks up the computer when used with Ekiga. Everything completely locks up & I have to do a hard shutdown by holding down the power button, before I can use the computer again. dmesg output when attached to comp.. [4302558.915000] usb 3-1: new full speed USB device using uhci_hcd and address 3[4302559.185000] Linux video capture interface: v1.00 [4302559.231000] drivers/usb/media/spca5xx/spca5xx-main.c: USB SPCA5XX camera found. Type Vimicro Zc301P 0x301b [4302559.348000] usbcore: registered new driver spca5xx [4302559.348000] drivers/usb/media/spca5xx/spca5xx-main.c: spca5xx driver 00.57.08 registered Not too sure how to go about de-bugging it, with having to restart everytime. Public bug reported: Affects: linux-source-2.6.15 ekiga (Ubuntu) Severity: Normal Priority: (none set) Assignee: Ubuntu Kernel Team Status: Unconfirmed Description: Upgraded from Breezy to Dapper 6.06, Kernel 2.6.15-19-386, Senston is the name of the webcam (only thing written on it). It's a night cam with 6 led's inside & a light sensor, if that makes any difference? Webcam seems to work fine with Wengo Phone (not fully tested in call yet, but it displays fine in preference's), but 9 times out of 10 fully locks up the computer when used with Ekiga. Everything completely locks up & I have to do a hard shutdown by holding down the power button, before I can use the computer again. dmesg output when attached to comp.. [4302558.915000] usb 3-1: new full speed USB device using uhci_hcd and address 3[4302559.185000] Linux video capture interface: v1.00 [4302559.231000] drivers/usb/media/spca5xx/spca5xx-main.c: USB SPCA5XX camera found. Type Vimicro Zc301P 0x301b [4302559.348000] usbcore: registered new driver spca5xx [4302559.348000] drivers/usb/media/spca5xx/spca5xx-main.c: spca5xx driver 00.57.08 registered Not too sure how to go about de-bugging it, with having to restart everytime. -- Everything locks up https://launchpad.net/malone/bugs/38058 From daniel.holbach at ubuntu.com Tue Apr 4 18:28:03 2006 From: daniel.holbach at ubuntu.com (Daniel Holbach) Date: Tue, 04 Apr 2006 18:28:03 -0000 Subject: [Bug 38058] Re: Everything locks up References: <20060404181106.25542.45586.malonedeb@gangotri.ubuntu.com> Message-ID: <20060404182804.25542.23884.launchpad@gangotri.ubuntu.com> ** Changed in: ekiga (Ubuntu) Sourcepackagename: ekiga => linux-source-2.6.15 Assignee: (unassigned) => Ubuntu Kernel Team -- Everything locks up https://launchpad.net/malone/bugs/38058 From viriiguy at gmail.com Tue Apr 4 18:37:44 2006 From: viriiguy at gmail.com (ViriiGuy) Date: Tue, 04 Apr 2006 18:37:44 -0000 Subject: [Bug 37765] Re: No matter what it simply will not connect. It scan and sees the networks, but it cannot connect. References: <20060402194212.5415.86136.malonedeb@gangotri.ubuntu.com> Message-ID: <20060404183744.14572.21669.malone@gandwana.ubuntu.com> I cannot even make mine work from terminal. I have been trying and trying and trying. I never see a request for IP on my router from my laptop under linux. I am utterly convinced that for whatever reason my card is only able to recieve but not send. At least this is how it seems to me. I have tried on every type of wireless network you can imagine. Under none of the options do the results change. The card DOES work, I use it in windows on a nearly daily basis for gaming. -- No matter what it simply will not connect. It scan and sees the networks, but it cannot connect. https://launchpad.net/malone/bugs/37765 From ariel.vardi at gmail.com Tue Apr 4 18:43:06 2006 From: ariel.vardi at gmail.com (Ariel Vardi) Date: Tue, 04 Apr 2006 18:43:06 -0000 Subject: [Bug 35319] Re: no Fn at all Vaio SZ1XP Dapper References: <20060317124552.11105.6446.malonedeb@gandwana.ubuntu.com> Message-ID: <20060404184307.14572.68231.malone@gandwana.ubuntu.com> I can capture the Fn keys by reading /dev/input/event4 Albert, can you confirm this? Just cat /dev/input/event4, press the fn keys and check if there is any output. On my SZ110, the customizable keys S1 and S2 are also captured on event4. Does anyone know how to use these events to create shortcuts in gnome? -- no Fn at all Vaio SZ1XP Dapper https://launchpad.net/malone/bugs/35319 From tskisner.public at gmail.com Tue Apr 4 18:47:31 2006 From: tskisner.public at gmail.com (TedKisner) Date: Tue, 04 Apr 2006 18:47:31 -0000 Subject: [Bug 33855] Re: A new Panasonic ACPI driver is required for kernel-2.6.15 References: <20060306024325.22115.48779.malonedeb@gandwana.ubuntu.com> Message-ID: <20060404184731.25542.62960.malone@gangotri.ubuntu.com> OK, so users just need to use the appropriate Gnome/KDE/X tools to map these keys to their desired actions. Sorry that this thread has diverged from the original topic. cheers, -Ted -- A new Panasonic ACPI driver is required for kernel-2.6.15 https://launchpad.net/malone/bugs/33855 From dan at danfreak.net Tue Apr 4 18:45:30 2006 From: dan at danfreak.net (Daniel Turner) Date: Tue, 04 Apr 2006 18:45:30 -0000 Subject: [Bug 30963] Re: [Bug 30963] Re: [Bug 30963] Re: [dapper] snd_powermac does not recognize sound card References: <20060209122327.25235.98036.malonedeb@gangotri.ubuntu.com> <20060404155744.14649.4961.malone@gandwana.ubuntu.com> <20060404171433.GA5587@piware.de> Message-ID: <4432BECA.8040704@danfreak.net> Hi Martin, Yup, snd-powermac is listed there ok... Good luck! Dan Martin Pitt wrote: >Hi, > >Daniel Turner [2006-04-04 15:57 -0000]: > > >>The soundcard works perfectly on the Flight 6 live CD, but once >>installed (with expresso) no soundcard found! This is with an iBook >>G4, 1.0 Ghz. [dapper] snd_powermac does not recognize sound card >>https://launchpad.net/malone/bugs/30963 >> >> > >Does /etc/modules contain snd_powermac? > >Martin > > > -- [dapper] snd_powermac does not recognize sound card https://launchpad.net/malone/bugs/30963 From ubuntu at paul.sladen.org Tue Apr 4 19:10:29 2006 From: ubuntu at paul.sladen.org (Paul Sladen) Date: Tue, 04 Apr 2006 19:10:29 -0000 Subject: [Bug 37132] Re: Fan non-stop on after long suspend - MSI S260 References: <20060329082822.7863.46602.malonedeb@gangotri.ubuntu.com> Message-ID: <20060404191029.14572.47810.malone@gandwana.ubuntu.com> Back to the original bug; is this perhaps 'totem' crashing when you unsuspend and then using 100% CPU? -- Fan non-stop on after long suspend - MSI S260 https://launchpad.net/malone/bugs/37132 From tskisner.public at gmail.com Tue Apr 4 19:11:39 2006 From: tskisner.public at gmail.com (TedKisner) Date: Tue, 04 Apr 2006 19:11:39 -0000 Subject: [Bug 33855] Re: A new Panasonic ACPI driver is required for kernel-2.6.15 References: <20060306024325.22115.48779.malonedeb@gandwana.ubuntu.com> Message-ID: <20060404191139.25542.60847.malone@gangotri.ubuntu.com> OK, so users just need to use the appropriate Gnome/KDE/X tools to map these keys to their desired actions. Sorry that this thread has diverged from the original topic. cheers, -Ted -- A new Panasonic ACPI driver is required for kernel-2.6.15 https://launchpad.net/malone/bugs/33855 From vetsel.patrice at wanadoo.fr Tue Apr 4 19:18:38 2006 From: vetsel.patrice at wanadoo.fr (VETSEL Patrice) Date: Tue, 04 Apr 2006 19:18:38 -0000 Subject: [Bug 37472] Re: the keyboard don't work perfectly on laptops acer travelmate 2300 series with Dapper References: <20060331122206.23707.692.malonedeb@gandwana.ubuntu.com> Message-ID: <20060404191839.14572.34635.launchpad@gandwana.ubuntu.com> ** Changed in: linux-source-2.6.15 (Ubuntu) Sourcepackagename: linux-source-2.6.15 => acpi-support ** Changed in: acpi-support (Ubuntu) Sourcepackagename: acpi-support => linux-source-2.6.15 -- the keyboard don't work perfectly on laptops acer travelmate 2300 series with Dapper https://launchpad.net/malone/bugs/37472 From ariel.vardi at gmail.com Tue Apr 4 19:32:16 2006 From: ariel.vardi at gmail.com (Ariel Vardi) Date: Tue, 04 Apr 2006 19:32:16 -0000 Subject: [Bug 35319] Re: no Fn at all Vaio SZ1XP Dapper References: <20060317124552.11105.6446.malonedeb@gandwana.ubuntu.com> Message-ID: <20060404193216.25542.78654.malone@gangotri.ubuntu.com> i thought that the event4 was working all the time, but actually it's not. I've just rebooted the laptop, and there's no output whatsoever in event4 now. It would probably show up again after a suspend-to-ram -- no Fn at all Vaio SZ1XP Dapper https://launchpad.net/malone/bugs/35319 From jense_mann1 at gmx.de Tue Apr 4 20:04:20 2006 From: jense_mann1 at gmx.de (Jens) Date: Tue, 04 Apr 2006 20:04:20 -0000 Subject: [Bug 38081] ndiswrapper-utils not installed automatically References: <20060404200420.25515.23897.malonedeb@gangotri.ubuntu.com> Message-ID: <20060404200420.25515.23897.malonedeb@gangotri.ubuntu.com> Public bug reported: Affects: ndiswrapper ndiswrapper-utils (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: Dapper Flight 6: What I do miss are the automatically installed ndiswrapper-utils to install the driver for my pci-wlan-card. Wpa is supported, that´s very good, but I can´t run my card without ndiswrapper. By Jens -- ndiswrapper-utils not installed automatically https://launchpad.net/malone/bugs/38081 From ep at erichpawlik.de Tue Apr 4 20:09:49 2006 From: ep at erichpawlik.de (Erich Pawlik) Date: Tue, 04 Apr 2006 20:09:49 -0000 Subject: [Bug 31126] Re: Kernel panic after installation of linux-386 [Dapper] References: <20060211062813.25235.10693.malonedeb@gangotri.ubuntu.com> Message-ID: <20060404200949.25515.95734.malone@gangotri.ubuntu.com> I don't think that aborting the installation is a robust behavior - it is simple to program, but robustness to my opinion is not a question of programming simplicity, but of ease of use. If a kernel update fails, a lot of people with not few technical skills (the Ubuntu target group I guess) will be out in the dark and don't know where to proceed from there. In addition, aborting a program is only simple it you accept to leave your garbage lying around all over the place. Again not very appropriate for the target group. On the other hand, I agree that this error is very unlikely to happen to somebody else. The usual suspects such as Google and the Ubuntu forums didn't help.So, aborting will not hurt a lot of people. I am not very pleased that a lot of kernels are lying around, but can deal with this manually. -- Kernel panic after installation of linux-386 [Dapper] https://launchpad.net/malone/bugs/31126 From mdz at ubuntu.com Tue Apr 4 20:27:18 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Tue, 04 Apr 2006 20:27:18 -0000 Subject: [Bug 31126] Re: [Bug 31126] Re: Kernel panic after installation of linux-386 [Dapper] References: <20060211062813.25235.10693.malonedeb@gangotri.ubuntu.com> <20060404200949.25515.95734.malone@gangotri.ubuntu.com> Message-ID: <20060404202718.GY11734@alcor.net> On Tue, Apr 04, 2006 at 08:09:49PM -0000, Erich Pawlik wrote: > I don't think that aborting the installation is a robust behavior - it is > simple to program, but robustness to my opinion is not a question of > programming simplicity, but of ease of use. If a kernel update fails, a > lot of people with not few technical skills (the Ubuntu target group I > guess) will be out in the dark and don't know where to proceed from there. > In addition, aborting a program is only simple it you accept to leave your > garbage lying around all over the place. Again not very appropriate for > the target group. In practical terms, there are cases where an error unwind is simply inherently riskier than aborting. Re-entrantly invoking the package manager to try to dynamically free up space during the installation of another package...that is one of these cases. An error message explaining that available space is exhausted, with a button to retry, would go a lot further toward a robust AND usable solution. > I am not very pleased that a lot of kernels are lying around, but can deal > with this manually. We are aware of this issue, but have not solved it yet. -- - mdz -- Kernel panic after installation of linux-386 [Dapper] https://launchpad.net/malone/bugs/31126 From surak at surak.eti.br Tue Apr 4 21:14:01 2006 From: surak at surak.eti.br (Alexandre Otto Strube) Date: Tue, 04 Apr 2006 21:14:01 -0000 Subject: [Bug 31527] Re: DRI locks up the machine when starting X on a Radeon 9250 References: <20060215163856.15884.24165.malonedeb@gangotri.ubuntu.com> Message-ID: <20060404211401.14649.93551.malone@gandwana.ubuntu.com> Can we change this bug's status to confirmed? -- DRI locks up the machine when starting X on a Radeon 9250 https://launchpad.net/malone/bugs/31527 From viriiguy at gmail.com Tue Apr 4 21:21:21 2006 From: viriiguy at gmail.com (ViriiGuy) Date: Tue, 04 Apr 2006 21:21:21 -0000 Subject: [Bug 37765] Re: No matter what it simply will not connect. It scan and sees the networks, but it cannot connect. References: <20060402194212.5415.86136.malonedeb@gangotri.ubuntu.com> Message-ID: <20060404212121.25515.52687.malone@gangotri.ubuntu.com> I cannot even make mine work from terminal. I have been trying and trying and trying. I never see a request for IP on my router from my laptop under linux. I am utterly convinced that for whatever reason my card is only able to recieve but not send. At least this is how it seems to me. I have tried on every type of wireless network you can imagine. Under none of the options do the results change. The card DOES work, I use it in windows on a nearly daily basis for gaming. -- No matter what it simply will not connect. It scan and sees the networks, but it cannot connect. https://launchpad.net/malone/bugs/37765 From cbinusa at gmail.com Tue Apr 4 21:46:19 2006 From: cbinusa at gmail.com (cbinusa) Date: Tue, 04 Apr 2006 21:46:19 -0000 Subject: [Bug 38097] Presario 900 sleeps w/o waking References: <20060404214619.14649.43257.malonedeb@gandwana.ubuntu.com> Message-ID: <20060404214619.14649.43257.malonedeb@gandwana.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 linux-image-2.6.15-19-686 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: My laptop readily sleeps but dark screen only comes on. Must reboot to fully awaken. PS Noobie but I really like ubuntu. Bye Bye Windows. -- Presario 900 sleeps w/o waking https://launchpad.net/malone/bugs/38097 From davim at isec.pt Tue Apr 4 21:55:49 2006 From: davim at isec.pt (Davim) Date: Tue, 04 Apr 2006 21:55:49 -0000 Subject: [Bug 38097] Re: Presario 900 sleeps w/o waking References: <20060404214619.14649.43257.malonedeb@gandwana.ubuntu.com> Message-ID: <20060404215549.14572.12757.malone@gandwana.ubuntu.com> I have the same problem but my laptop is a CLASUS challenger aw15 with a AMD turion64 -- Presario 900 sleeps w/o waking https://launchpad.net/malone/bugs/38097 From JMBALADO at terra.es Tue Apr 4 22:08:39 2006 From: JMBALADO at terra.es (Jose) Date: Tue, 04 Apr 2006 22:08:39 -0000 Subject: [Bug 18691] Re: [Bug 18691] Re: Computer gets hotter if no USB port is used. References: <20060113135741.21012.41956.launchpad@macquarie.warthogs.hbd.com> <20060403133153.23082.74842.malone@gandwana.ubuntu.com> Message-ID: <1144188519.8368.9.camel@localhost.localdomain> On Mon, 2006-04-03 at 13:31 +0000, Jonathan Jesse wrote: > Have you had a chance to upgrade to Kubuntu 6.06? I have not had any problems with using USB devices, whether hard drives or mice with any version of Kubuntu. Have any updates fixed the problem? USB works very well, the only problem is if I want to travel with the computer because I must plug some device in any USB port so the CPU temperature doesn't start to go up, reducing greatly the battery life. I'll try to update to kubuntu 6.06 as soon as I can. Best regards, Jose -- Computer gets hotter if no USB port is used. https://launchpad.net/malone/bugs/18691 From mattw at cat.pdx.edu Tue Apr 4 22:21:44 2006 From: mattw at cat.pdx.edu (Matt Whiteley) Date: Tue, 04 Apr 2006 22:21:44 -0000 Subject: [Bug 38100] sky2.ko not included in nic-modules udeb References: <20060404222144.14649.39331.malonedeb@gandwana.ubuntu.com> Message-ID: <20060404222144.14649.39331.malonedeb@gandwana.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: The linux-image-2.6.15-19-386_2.6.15-19.29_i386.deb includes a working sky2.ko module. This module isn't included in nic- modules-2.6.15-19-386-di_2.6.15-19.29_i386.udeb. The module isn't included in the nic-modules manifest for the udeb. I rebuilt a mini.iso with the module included and it boots as expected. --- linux-source-2.6.15-2.6.15/debian/d-i/shared/modules/nic-modules.orig 2006-03-02 13:18:37.000000000 -0800 +++ linux-source-2.6.15-2.6.15/debian/d-i/shared/modules/nic-modules 2006-04-04 15:16:21.000000000 -0700 @@ -102,9 +102,10 @@ s2io shaper sis900 +sk98lin ? skfp ? skge -sk98lin ? +sky2 ? smc9194 ? smc-ultra ? smc-ultra32 ? -- sky2.ko not included in nic-modules udeb https://launchpad.net/malone/bugs/38100 From djturner at blueyonder.co.uk Tue Apr 4 23:17:13 2006 From: djturner at blueyonder.co.uk (Trip) Date: Tue, 04 Apr 2006 23:17:13 -0000 Subject: [Bug 38058] Re: Everything locks up References: <20060404181106.25542.45586.malonedeb@gangotri.ubuntu.com> Message-ID: <20060404231713.14572.98960.malone@gandwana.ubuntu.com> Tested in call now & it works fine in wengo. -- Everything locks up https://launchpad.net/malone/bugs/38058 From lakin.wecker at gmail.com Tue Apr 4 23:33:41 2006 From: lakin.wecker at gmail.com (Lakin Wecker) Date: Tue, 04 Apr 2006 23:33:41 -0000 Subject: [Bug 29499] Acer Ferrari 4005 Fails to resume from Hibernate References: <20060123232532.28441.7930.malonedeb@gangotri.ubuntu.com> Message-ID: <20060404233341.14649.82828.launchpad@canonical@gandwana.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Fix Released Description: My acer ferrari laptop goes through all the right motions when I choose hibernate from the logout dialog: the screen blanks, there is some disk activity and after some seconds(15-25) the computer power is turned off. When resuming from this state I get to the screen shown in the attached screenshot. This is similar to the bug: https://launchpad.net/distros/ubuntu/+source /acpi-support/+bug/29218 This is on flight 3 installed fresh today, and then fully upgraded to the newest available packages as of about 4 hours ago. Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Fix Released Description: My acer ferrari laptop goes through all the right motions when I choose hibernate from the logout dialog: the screen blanks, there is some disk activity and after some seconds(15-25) the computer power is turned off. When resuming from this state I get to the screen shown in the attached screenshot. This is similar to the bug: https://launchpad.net/distros/ubuntu/+source /acpi-support/+bug/29218 This is on flight 3 installed fresh today, and then fully upgraded to the newest available packages as of about 4 hours ago. -- Acer Ferrari 4005 Fails to resume from Hibernate https://launchpad.net/malone/bugs/29499 From ervin at kde.org Tue Apr 4 23:34:42 2006 From: ervin at kde.org (ervin) Date: Tue, 04 Apr 2006 23:34:42 -0000 Subject: [Bug 30662] Hang on resume after hibernation with vga16fb References: <20060206160730.11709.45378.malonedeb@gandwana.ubuntu.com> Message-ID: <20060404233442.25542.11289.launchpad@canonical@gangotri.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 acpi-support (Ubuntu) Severity: Normal Priority: (none set) Assignee: Matthew Garrett Status: Fix Released Description: Today I decided to find why hibernation didn't work on my laptop (HP Pavilion dv4275). I'm currently using Kubuntu dapper. The laptop goes to hibernation just well, but hang with a blank screen on resume. I thought that i was caused by the fglrx driver, but even when using free drivers it was broken. Then, I took some time booted in failsafe mode and experimented loading one more module at a time. Finally, I think that I've found the culprit, it seems to be vga16fb. It's automatically loaded because of usplash. After removing "splash" from the kernel command line hibernation works like a charm. Current kernel version is 2.6.15-14-386. Public bug reported: Affects: linux-source-2.6.15 acpi-support (Ubuntu) Severity: Normal Priority: (none set) Assignee: Matthew Garrett Status: Fix Released Description: Today I decided to find why hibernation didn't work on my laptop (HP Pavilion dv4275). I'm currently using Kubuntu dapper. The laptop goes to hibernation just well, but hang with a blank screen on resume. I thought that i was caused by the fglrx driver, but even when using free drivers it was broken. Then, I took some time booted in failsafe mode and experimented loading one more module at a time. Finally, I think that I've found the culprit, it seems to be vga16fb. It's automatically loaded because of usplash. After removing "splash" from the kernel command line hibernation works like a charm. Current kernel version is 2.6.15-14-386. -- Hang on resume after hibernation with vga16fb https://launchpad.net/malone/bugs/30662 From mjg59 at codon.org.uk Tue Apr 4 23:32:30 2006 From: mjg59 at codon.org.uk (Matthew Garrett) Date: Tue, 04 Apr 2006 23:32:30 -0000 Subject: [Bug 34587] Re: Hibernating 1GB of RAM doesn't work anymore with 2.6.15-18 & -19 References: <20060312123742.17044.83867.malonedeb@gangotri.ubuntu.com> Message-ID: <20060404233231.14572.97935.malone@gandwana.ubuntu.com> Should be fixed in the 2.6.15-20 that's just been released. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Fix Committed => Fix Released -- Hibernating 1GB of RAM doesn't work anymore with 2.6.15-18 & -19 https://launchpad.net/malone/bugs/34587 From mjg59 at codon.org.uk Tue Apr 4 23:34:42 2006 From: mjg59 at codon.org.uk (Matthew Garrett) Date: Tue, 04 Apr 2006 23:34:42 -0000 Subject: [Bug 30662] Re: Hang on resume after hibernation with vga16fb References: <20060206160730.11709.45378.malonedeb@gandwana.ubuntu.com> Message-ID: <20060404233442.25542.41056.malone@gangotri.ubuntu.com> Should be fixed in the 2.6.15-20 kernel that's just been released. ** Changed in: acpi-support (Ubuntu) Sourcepackagename: acpi-support => linux-source-2.6.15 Status: Confirmed => Fix Released -- Hang on resume after hibernation with vga16fb https://launchpad.net/malone/bugs/30662 From mjg59 at codon.org.uk Tue Apr 4 23:33:40 2006 From: mjg59 at codon.org.uk (Matthew Garrett) Date: Tue, 04 Apr 2006 23:33:40 -0000 Subject: [Bug 29499] Re: Acer Ferrari 4005 Fails to resume from Hibernate References: <20060123232532.28441.7930.malonedeb@gangotri.ubuntu.com> Message-ID: <20060404233341.14649.6903.malone@gandwana.ubuntu.com> Should be fixed in the 2.6.15-20 kernel that's just been released ** Changed in: acpi-support (Ubuntu) Sourcepackagename: acpi-support => linux-source-2.6.15 Status: Confirmed => Fix Released -- Acer Ferrari 4005 Fails to resume from Hibernate https://launchpad.net/malone/bugs/29499 From bfiser at cableone.net Tue Apr 4 23:47:18 2006 From: bfiser at cableone.net (Bill Fiser) Date: Tue, 04 Apr 2006 23:47:18 -0000 Subject: [Bug 22619] Hibernation resume failure on Dell 600m (regression from Hoary) References: <20060113141920.21012.3973.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060404234718.25542.58247.launchpad@canonical@gangotri.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Major Priority: Medium Assignee: Matthew Garrett Status: Fix Released Description: When I hibernate in Breezy on my Dell 600m laptop, everything seems to work fine. When I try to resume from the hibernation, all that I get is a gray screen with a blinking cursor in the middle left side of the screen. The computer is completely unresponsive. Hibernate and Resume worked fine for me in Hoary. Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Major Priority: Medium Assignee: Matthew Garrett Status: Fix Released Description: When I hibernate in Breezy on my Dell 600m laptop, everything seems to work fine. When I try to resume from the hibernation, all that I get is a gray screen with a blinking cursor in the middle left side of the screen. The computer is completely unresponsive. Hibernate and Resume worked fine for me in Hoary. -- Hibernation resume failure on Dell 600m (regression from Hoary) https://launchpad.net/malone/bugs/22619 From mjg59 at codon.org.uk Tue Apr 4 23:40:52 2006 From: mjg59 at codon.org.uk (Matthew Garrett) Date: Tue, 04 Apr 2006 23:40:52 -0000 Subject: [Bug 35139] Re: resume from hibernate hangs References: <20060316000416.6537.80846.malonedeb@gangotri.ubuntu.com> Message-ID: <20060404234052.14572.20862.malone@gandwana.ubuntu.com> Should be fixed in the 2.6.15-20 kernel that's just been released ** Changed in: linux-meta linux-source (Ubuntu) Sourcepackagename: linux-meta => linux-source-2.6.15 Status: Unconfirmed => Fix Committed -- resume from hibernate hangs https://launchpad.net/malone/bugs/35139 From mdz at ubuntu.com Tue Apr 4 23:44:30 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Tue, 04 Apr 2006 23:44:30 -0000 Subject: [Bug 32509] Re: My computer freeze during the time config in the boot process References: <20060222202506.15743.66610.malonedeb@gandwana.ubuntu.com> Message-ID: <20060404234430.25542.77659.malone@gangotri.ubuntu.com> Note that you marked this bug as confidential, so no one saw it until now. ** Visibility changed to: Public -- My computer freeze during the time config in the boot process https://launchpad.net/malone/bugs/32509 From mdz at ubuntu.com Tue Apr 4 23:44:15 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Tue, 04 Apr 2006 23:44:15 -0000 Subject: [Bug 32509] Re: My computer freeze during the time config in the boot process References: <20060222202506.15743.66610.malonedeb@gandwana.ubuntu.com> Message-ID: <20060404234415.25515.19956.malone@gangotri.ubuntu.com> Please try the latest milestone (currently Flight 6) and see if your problem persists. If so, please follow the instructions at https://wiki.ubuntu.com/DebuggingSystemCrash ** Changed in: debian-installer (Ubuntu) Sourcepackagename: debian-installer => linux-source-2.6.15 Binarypackagename: debian-installer => None Status: Unconfirmed => Needs Info -- My computer freeze during the time config in the boot process https://launchpad.net/malone/bugs/32509 From mjg59 at codon.org.uk Tue Apr 4 23:47:18 2006 From: mjg59 at codon.org.uk (Matthew Garrett) Date: Tue, 04 Apr 2006 23:47:18 -0000 Subject: [Bug 22619] Re: Hibernation resume failure on Dell 600m (regression from Hoary) References: <20060113141920.21012.3973.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060404234718.25542.79131.malone@gangotri.ubuntu.com> Should be fixed in the latest kernel (2.6.15-20) ** Changed in: Ubuntu Sourcepackagename: None => linux-source-2.6.15 Status: Confirmed => Fix Released -- Hibernation resume failure on Dell 600m (regression from Hoary) https://launchpad.net/malone/bugs/22619 From wuduguru.gentoo-bugzilla.nospam at mnet-online.de Tue Apr 4 23:52:16 2006 From: wuduguru.gentoo-bugzilla.nospam at mnet-online.de (Tobias Vogel) Date: Tue, 04 Apr 2006 23:52:16 -0000 Subject: [Bug 38104] Thinkpad R50p: Hibernation takes some minutes when running on battery References: <20060404235217.25542.51089.malonedeb@gangotri.ubuntu.com> Message-ID: <20060404235217.25542.51089.malonedeb@gangotri.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 linux-image-2.6.15-19-686 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: My Thinkpad R50p shows some strange behaviour with suspend to disk in Dapper 6.06. When powered on AC, suspend to disk works as expected and powers down the laptop within some seconds. If I try the same, when running on battery, the shutdown process takes about 3-5 minutes with high CPU load (fan rotating at high rpm) until the laptop finally shuts down. This bug seems to be related to #29767 https://launchpad.net/distros/ubuntu/+source/linux-source-2.6.15/+bug/29767 (Problems hibernating with docked Thinkpad) Valentijn Sessink brought up a workaround in the comments of this bug, by disabling HD write caching in /etc/laptop-mode/laptop-mode.conf [CONTROL_HD_WRITECACHE=0]. This setting solves the problem and hibernation works as expected when running on battery. As this setting is described as potentially harmfull (possible data losses), I filed this bug, to document the behaviour for others and maybe there's another solution which isn't considered as problematic as the workaround. If I can help you out with any further details, let me know. -- Thinkpad R50p: Hibernation takes some minutes when running on battery https://launchpad.net/malone/bugs/38104 From sebastien.estienne at gmail.com Tue Apr 4 23:52:37 2006 From: sebastien.estienne at gmail.com (Sebastien Estienne) Date: Tue, 04 Apr 2006 23:52:37 -0000 Subject: [Bug 35991] Re: dapper: Regression with sound support between kernel 2.6.15-18 and -19 References: <20060322113416.30442.75959.malonedeb@gangotri.ubuntu.com> Message-ID: <20060404235237.14649.84625.launchpad@gandwana.ubuntu.com> ** Changed in: linux-source-2.6.15 linux-image-2.6.15-19-386 (Ubuntu) Status: Fix Committed => Fix Released -- dapper: Regression with sound support between kernel 2.6.15-18 and -19 https://launchpad.net/malone/bugs/35991 From Lamego at PT-link.net Wed Apr 5 00:07:02 2006 From: Lamego at PT-link.net (=?utf-8?q?Jo=C3=A3o_Pinto?=) Date: Wed, 05 Apr 2006 00:07:02 -0000 Subject: [Bug 32504] LCD Out of Range during graphical boot References: <20060222194110.15743.11424.malonedeb@gandwana.ubuntu.com> Message-ID: <20060405000702.25542.54523.launchpad@canonical@gangotri.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: I have an SONY SDM-HX73 LCD 17', after upgrading to dapper during the graphical boot I get the "OUT OF RANGE 35.7KHz/80Hz" warning and the screen enters power saving mode in a few seconds. I had to remove the "splash" option from boot to be able to "use the screen". Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: I have an SONY SDM-HX73 LCD 17', after upgrading to dapper during the graphical boot I get the "OUT OF RANGE 35.7KHz/80Hz" warning and the screen enters power saving mode in a few seconds. I had to remove the "splash" option from boot to be able to "use the screen". -- LCD Out of Range during graphical boot https://launchpad.net/malone/bugs/32504 From mdz at ubuntu.com Wed Apr 5 00:07:24 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Wed, 05 Apr 2006 00:07:24 -0000 Subject: [Bug 32504] Re: LCD Out of Range during graphical boot References: <20060222194110.15743.11424.malonedeb@gandwana.ubuntu.com> Message-ID: <20060405000724.14649.58449.malone@gandwana.ubuntu.com> Adam: looks like fallout from 640x400? ** Changed in: gfxboot (Ubuntu) Sourcepackagename: gfxboot => linux-source-2.6.15 Binarypackagename: gfxboot => None -- LCD Out of Range during graphical boot https://launchpad.net/malone/bugs/32504 From mdz at ubuntu.com Wed Apr 5 00:19:30 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Wed, 05 Apr 2006 00:19:30 -0000 Subject: [Bug 32582] Re: After Install menu, flight4 installer hangs on MP IBM X350 (the old netfinity 6000R type machine) References: <20060223081721.14968.69652.malonedeb@gangotri.ubuntu.com> Message-ID: <20060405001930.14649.4794.malone@gandwana.ubuntu.com> Please follow the instructions at https://wiki.ubuntu.com/DebuggingSystemCrash to get a trace from the crash ** Changed in: linux-source-2.6.15 (Ubuntu) Assignee: (unassigned) => Ben Collins Status: Unconfirmed => Needs Info -- After Install menu, flight4 installer hangs on MP IBM X350 (the old netfinity 6000R type machine) https://launchpad.net/malone/bugs/32582 From mdz at ubuntu.com Wed Apr 5 00:17:10 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Wed, 05 Apr 2006 00:17:10 -0000 Subject: [Bug 32593] Re: Dell X1 fails to resume with mmc_core and sdhci modules loaded References: <20060223111634.15768.50276.malonedeb@gandwana.ubuntu.com> Message-ID: <20060405001710.14649.64356.malone@gandwana.ubuntu.com> Is this still happening with current Dapper? ** Changed in: linux-meta linux (Ubuntu) Sourcepackagename: linux-meta => linux-source-2.6.15 Binarypackagename: linux => None -- Dell X1 fails to resume with mmc_core and sdhci modules loaded https://launchpad.net/malone/bugs/32593 From mdz at ubuntu.com Wed Apr 5 00:38:32 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Wed, 05 Apr 2006 00:38:32 -0000 Subject: [Bug 32519] Re: root disk not found when booting on Sony Vaio PGN-S3XP References: <20060222213438.15768.684.malonedeb@gandwana.ubuntu.com> Message-ID: <20060405003832.25515.21885.malone@gangotri.ubuntu.com> Is this still happening with current Dapper? How did you determine that you need to load sg (you shouldn't)? What is the name of your root device? Please send: cat /proc/cmdline lspci lspci -n ** Changed in: initramfs-tools (Ubuntu) Sourcepackagename: initramfs-tools => None Assignee: (unassigned) => Scott James Remnant Status: Unconfirmed => Needs Info -- root disk not found when booting on Sony Vaio PGN-S3XP https://launchpad.net/malone/bugs/32519 From j.quigley at serviomatic.com Wed Apr 5 00:56:26 2006 From: j.quigley at serviomatic.com (Jason Quigley) Date: Wed, 05 Apr 2006 00:56:26 -0000 Subject: [Bug 32751] Include mh2 patch from bluez.org in future kernels References: <20060224171842.16580.17242.malonedeb@gandwana.ubuntu.com> Message-ID: <20060405005626.14572.82986.launchpad@canonical@gandwana.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Wishlist Priority: (none set) Assignee: Ben Collins Status: Unconfirmed Description: Hi! It would be great to get the mh2 patch from bluez.org included in future kernels as this solved *ALL* bluetooth related problems I was having. These problems were: DiNovo media keys not working Unable to pair using Logitech DiNovo mouse cradle Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Wishlist Priority: (none set) Assignee: Ben Collins Status: Unconfirmed Description: Hi! It would be great to get the mh2 patch from bluez.org included in future kernels as this solved *ALL* bluetooth related problems I was having. These problems were: DiNovo media keys not working Unable to pair using Logitech DiNovo mouse cradle -- Include mh2 patch from bluez.org in future kernels https://launchpad.net/malone/bugs/32751 From herbert at linuxhacker.at Wed Apr 5 00:59:06 2006 From: herbert at linuxhacker.at (Herbert Straub) Date: Wed, 05 Apr 2006 00:59:06 -0000 Subject: [Bug 32714] Installation problem on HP Blade with the ILO Remote Console References: <20060224130217.27067.43704.malonedeb@gangotri.ubuntu.com> Message-ID: <20060405005906.25515.12313.launchpad@canonical@gangotri.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Assignee: Ben Collins Status: Unconfirmed Description: I have problems installing Dapper Flight 4 on a HP Blade over the ILO Remote Console (works with Firefox and JAVA). After booting the system with attached Flight 4 CD the installation menu is displayed correctly. But if i select server and hit return, the Linux kernel starts and after few seconds the Conole display is black. I try to change the VGA Mode with F3 to 600 x 600 x 24 and this works. The normal installation procedure starts. The first boot shows the same problem. The screen is after the Grub message black. I changed the grub kernel line to: kernel /boot/vmlinuz-2.6.15-15-amd64-generic root=/dev/cciss/c0d0p1 ro fb800x600 quiet Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Assignee: Ben Collins Status: Unconfirmed Description: I have problems installing Dapper Flight 4 on a HP Blade over the ILO Remote Console (works with Firefox and JAVA). After booting the system with attached Flight 4 CD the installation menu is displayed correctly. But if i select server and hit return, the Linux kernel starts and after few seconds the Conole display is black. I try to change the VGA Mode with F3 to 600 x 600 x 24 and this works. The normal installation procedure starts. The first boot shows the same problem. The screen is after the Grub message black. I changed the grub kernel line to: kernel /boot/vmlinuz-2.6.15-15-amd64-generic root=/dev/cciss/c0d0p1 ro fb800x600 quiet -- Installation problem on HP Blade with the ILO Remote Console https://launchpad.net/malone/bugs/32714 From mdz at ubuntu.com Wed Apr 5 00:56:26 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Wed, 05 Apr 2006 00:56:26 -0000 Subject: [Bug 32751] Re: Include mh2 patch from bluez.org in future kernels References: <20060224171842.16580.17242.malonedeb@gandwana.ubuntu.com> Message-ID: <20060405005626.14572.71842.launchpad@gandwana.ubuntu.com> ** Changed in: bluez-utils (Ubuntu) Sourcepackagename: bluez-utils => linux-source-2.6.15 Severity: Normal => Wishlist Assignee: (unassigned) => Ben Collins ** Changed in: linux-source-2.6.15 (Ubuntu) Severity: Wishlist => Normal -- Include mh2 patch from bluez.org in future kernels https://launchpad.net/malone/bugs/32751 From mdz at ubuntu.com Wed Apr 5 00:59:06 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Wed, 05 Apr 2006 00:59:06 -0000 Subject: [Bug 32714] Re: Installation problem on HP Blade with the ILO Remote Console References: <20060224130217.27067.43704.malonedeb@gangotri.ubuntu.com> Message-ID: <20060405005906.25515.34193.launchpad@gangotri.ubuntu.com> ** Changed in: debian-installer (Ubuntu) Sourcepackagename: debian-installer => linux-source-2.6.15 Binarypackagename: debian-installer => None Assignee: (unassigned) => Ben Collins -- Installation problem on HP Blade with the ILO Remote Console https://launchpad.net/malone/bugs/32714 From viriiguy at gmail.com Wed Apr 5 01:05:13 2006 From: viriiguy at gmail.com (ViriiGuy) Date: Wed, 05 Apr 2006 01:05:13 -0000 Subject: [Bug 37765] Re: No matter what it simply will not connect. It scan and sees the networks, but it cannot connect. References: <20060402194212.5415.86136.malonedeb@gangotri.ubuntu.com> Message-ID: <20060405010513.14572.67238.malone@gandwana.ubuntu.com> I cannot even make mine work from terminal. I have been trying and trying and trying. I never see a request for IP on my router from my laptop under linux. I am utterly convinced that for whatever reason my card is only able to recieve but not send. At least this is how it seems to me. I have tried on every type of wireless network you can imagine. Under none of the options do the results change. The card DOES work, I use it in windows on a nearly daily basis for gaming. -- No matter what it simply will not connect. It scan and sees the networks, but it cannot connect. https://launchpad.net/malone/bugs/37765 From rwgould at gmail.com Wed Apr 5 01:22:21 2006 From: rwgould at gmail.com (Richard Gould) Date: Wed, 05 Apr 2006 01:22:21 -0000 Subject: [Bug 37642] Sleep/Hibernate do not work on Sony VAIO VGN-FS660/W in Dapper References: <20060401212742.5441.63396.malonedeb@gangotri.ubuntu.com> Message-ID: <20060405012221.25542.35499.launchpad@canonical@gangotri.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: Testing the latest version of Dapper on my Sony VAIO VGN-FS660/W, and both sleep and hibernate do not work. Choosing Logout->Sleep or Hibernate will shut the system down (and the sleep light will flash if I chose sleep), but the machine will not wake up afterwards. All I get is a blank screen. The attached USB mouse still retains power after resuming from sleep, but not after resuming from hibernate. uname -r returns "2.6.15-19-386" I am not sure what else is helpful, so please let me know if I can assist in any other way. Here is the contents of /var/log/acpid: [Sat Apr 1 08:12:27 2006] starting up [Sat Apr 1 08:12:27 2006] 50 rules loaded [Sat Apr 1 08:12:31 2006] client connected from 3897[108:108] [Sat Apr 1 08:12:31 2006] 1 client rule loaded [Sat Apr 1 10:56:36 2006] exiting [Sat Apr 1 10:56:38 2006] starting up [Sat Apr 1 10:56:38 2006] 53 rules loaded [Sat Apr 1 10:56:41 2006] client connected from 3897[108:108] [Sat Apr 1 10:56:41 2006] 1 client rule loaded [Sat Apr 1 11:09:34 2006] exiting [Sat Apr 1 11:12:51 2006] starting up [Sat Apr 1 11:12:51 2006] 53 rules loaded [Sat Apr 1 11:12:53 2006] client connected from 4228[113:113] [Sat Apr 1 11:12:53 2006] 1 client rule loaded [Sat Apr 1 11:41:49 2006] received event "battery BAT0 00000080 00000001" [Sat Apr 1 11:41:49 2006] notifying client 4228[113:113] [Sat Apr 1 11:41:49 2006] executing action "/etc/acpi/power.sh" [Sat Apr 1 11:41:49 2006] BEGIN HANDLER MESSAGES [Sat Apr 1 11:41:50 2006] END HANDLER MESSAGES [Sat Apr 1 11:41:50 2006] action exited with status 0 [Sat Apr 1 11:41:50 2006] completed event "battery BAT0 00000080 00000001" [Sat Apr 1 11:41:50 2006] received event "processor CPU0 00000080 00000000" [Sat Apr 1 11:41:50 2006] notifying client 4228[113:113] [Sat Apr 1 11:41:50 2006] completed event "processor CPU0 00000080 00000000" [Sat Apr 1 11:41:50 2006] received event "processor CPU0 00000081 00000000" [Sat Apr 1 11:41:50 2006] notifying client 4228[113:113] [Sat Apr 1 11:41:50 2006] completed event "processor CPU0 00000081 00000000" [Sat Apr 1 11:41:53 2006] received event "battery BAT0 00000080 00000001" [Sat Apr 1 11:41:53 2006] notifying client 4228[113:113] [Sat Apr 1 11:41:53 2006] executing action "/etc/acpi/power.sh" [Sat Apr 1 11:41:53 2006] BEGIN HANDLER MESSAGES [Sat Apr 1 11:41:53 2006] END HANDLER MESSAGES [Sat Apr 1 11:41:53 2006] action exited with status 0 [Sat Apr 1 11:41:53 2006] completed event "battery BAT0 00000080 00000001" Laptop mode enabled, active. [Sat Apr 1 11:41:59 2006] received event "battery BAT0 00000080 00000001" [Sat Apr 1 11:41:59 2006] notifying client 4228[113:113] [Sat Apr 1 11:41:59 2006] executing action "/etc/acpi/power.sh" [Sat Apr 1 11:41:59 2006] BEGIN HANDLER MESSAGES [Sat Apr 1 11:41:59 2006] END HANDLER MESSAGES [Sat Apr 1 11:41:59 2006] action exited with status 0 [Sat Apr 1 11:41:59 2006] completed event "battery BAT0 00000080 00000001" [Sat Apr 1 11:42:09 2006] received event "battery BAT0 00000080 00000001" [Sat Apr 1 11:42:09 2006] notifying client 4228[113:113] [Sat Apr 1 11:42:09 2006] executing action "/etc/acpi/power.sh" [Sat Apr 1 11:42:09 2006] BEGIN HANDLER MESSAGES [Sat Apr 1 11:42:09 2006] END HANDLER MESSAGES [Sat Apr 1 11:42:09 2006] action exited with status 0 [Sat Apr 1 11:42:09 2006] completed event "battery BAT0 00000080 00000001" [Sat Apr 1 11:42:15 2006] received event "battery BAT0 00000080 00000001" [Sat Apr 1 11:42:15 2006] notifying client 4228[113:113] [Sat Apr 1 11:42:15 2006] executing action "/etc/acpi/power.sh" [Sat Apr 1 11:42:15 2006] BEGIN HANDLER MESSAGES [Sat Apr 1 11:42:15 2006] END HANDLER MESSAGES [Sat Apr 1 11:42:15 2006] action exited with status 0 [Sat Apr 1 11:42:15 2006] completed event "battery BAT0 00000080 00000001" [Sat Apr 1 11:42:25 2006] received event "battery BAT0 00000080 00000001" [Sat Apr 1 11:42:25 2006] notifying client 4228[113:113] [Sat Apr 1 11:42:25 2006] executing action "/etc/acpi/power.sh" [Sat Apr 1 11:42:25 2006] BEGIN HANDLER MESSAGES [Sat Apr 1 11:42:26 2006] END HANDLER MESSAGES [Sat Apr 1 11:42:26 2006] action exited with status 0 [Sat Apr 1 11:42:26 2006] completed event "battery BAT0 00000080 00000001" [Sat Apr 1 11:42:36 2006] received event "battery BAT0 00000080 00000001" [Sat Apr 1 11:42:36 2006] notifying client 4228[113:113] [Sat Apr 1 11:42:36 2006] executing action "/etc/acpi/power.sh" [Sat Apr 1 11:42:36 2006] BEGIN HANDLER MESSAGES [Sat Apr 1 11:42:36 2006] END HANDLER MESSAGES [Sat Apr 1 11:42:36 2006] action exited with status 0 [Sat Apr 1 11:42:36 2006] completed event "battery BAT0 00000080 00000001" [Sat Apr 1 11:42:52 2006] received event "battery BAT0 00000080 00000001" [Sat Apr 1 11:42:52 2006] notifying client 4228[113:113] [Sat Apr 1 11:42:52 2006] executing action "/etc/acpi/power.sh" [Sat Apr 1 11:42:52 2006] BEGIN HANDLER MESSAGES [Sat Apr 1 11:42:52 2006] END HANDLER MESSAGES [Sat Apr 1 11:42:52 2006] action exited with status 0 [Sat Apr 1 11:42:52 2006] completed event "battery BAT0 00000080 00000001" [Sat Apr 1 11:43:14 2006] received event "battery BAT0 00000080 00000001" [Sat Apr 1 11:43:14 2006] notifying client 4228[113:113] [Sat Apr 1 11:43:14 2006] executing action "/etc/acpi/power.sh" [Sat Apr 1 11:43:14 2006] BEGIN HANDLER MESSAGES [Sat Apr 1 11:43:14 2006] END HANDLER MESSAGES [Sat Apr 1 11:43:14 2006] action exited with status 0 [Sat Apr 1 11:43:14 2006] completed event "battery BAT0 00000080 00000001" [Sat Apr 1 11:43:19 2006] received event "battery BAT0 00000080 00000001" [Sat Apr 1 11:43:19 2006] notifying client 4228[113:113] [Sat Apr 1 11:43:19 2006] executing action "/etc/acpi/power.sh" [Sat Apr 1 11:43:19 2006] BEGIN HANDLER MESSAGES [Sat Apr 1 11:43:19 2006] END HANDLER MESSAGES [Sat Apr 1 11:43:19 2006] action exited with status 0 [Sat Apr 1 11:43:19 2006] completed event "battery BAT0 00000080 00000001" [Sat Apr 1 11:43:30 2006] received event "battery BAT0 00000080 00000001" [Sat Apr 1 11:43:30 2006] notifying client 4228[113:113] [Sat Apr 1 11:43:30 2006] executing action "/etc/acpi/power.sh" [Sat Apr 1 11:43:30 2006] BEGIN HANDLER MESSAGES [Sat Apr 1 11:43:30 2006] END HANDLER MESSAGES [Sat Apr 1 11:43:30 2006] action exited with status 0 [Sat Apr 1 11:43:30 2006] completed event "battery BAT0 00000080 00000001" [Sat Apr 1 11:43:40 2006] received event "battery BAT0 00000080 00000001" [Sat Apr 1 11:43:40 2006] notifying client 4228[113:113] [Sat Apr 1 11:43:40 2006] executing action "/etc/acpi/power.sh" [Sat Apr 1 11:43:40 2006] BEGIN HANDLER MESSAGES [Sat Apr 1 11:43:40 2006] END HANDLER MESSAGES [Sat Apr 1 11:43:40 2006] action exited with status 0 [Sat Apr 1 11:43:40 2006] completed event "battery BAT0 00000080 00000001" [Sat Apr 1 11:43:40 2006] received event "processor CPU0 00000080 00000000" [Sat Apr 1 11:43:40 2006] notifying client 4228[113:113] [Sat Apr 1 11:43:40 2006] completed event "processor CPU0 00000080 00000000" [Sat Apr 1 11:43:41 2006] received event "processor CPU0 00000081 00000000" [Sat Apr 1 11:43:41 2006] notifying client 4228[113:113] [Sat Apr 1 11:43:41 2006] completed event "processor CPU0 00000081 00000000" Laptop mode enabled, not active. [Sat Apr 1 11:45:17 2006] received event "battery BAT0 00000080 00000001" [Sat Apr 1 11:45:17 2006] notifying client 4228[113:113] [Sat Apr 1 11:45:17 2006] executing action "/etc/acpi/power.sh" [Sat Apr 1 11:45:17 2006] BEGIN HANDLER MESSAGES [Sat Apr 1 11:45:17 2006] END HANDLER MESSAGES [Sat Apr 1 11:45:17 2006] action exited with status 0 [Sat Apr 1 11:45:17 2006] completed event "battery BAT0 00000080 00000001" [Sat Apr 1 11:52:05 2006] received event "battery BAT0 00000080 00000001" [Sat Apr 1 11:52:05 2006] notifying client 4228[113:113] [Sat Apr 1 11:52:05 2006] executing action "/etc/acpi/power.sh" [Sat Apr 1 11:52:05 2006] BEGIN HANDLER MESSAGES [Sat Apr 1 11:52:05 2006] END HANDLER MESSAGES [Sat Apr 1 11:52:05 2006] action exited with status 0 [Sat Apr 1 11:52:05 2006] completed event "battery BAT0 00000080 00000001" [Sat Apr 1 11:57:54 2006] received event "battery BAT0 00000080 00000001" [Sat Apr 1 11:57:54 2006] notifying client 4228[113:113] [Sat Apr 1 11:57:54 2006] executing action "/etc/acpi/power.sh" [Sat Apr 1 11:57:54 2006] BEGIN HANDLER MESSAGES [Sat Apr 1 11:57:55 2006] END HANDLER MESSAGES [Sat Apr 1 11:57:55 2006] action exited with status 0 [Sat Apr 1 11:57:55 2006] completed event "battery BAT0 00000080 00000001" [Sat Apr 1 12:01:45 2006] received event "battery BAT0 00000080 00000001" [Sat Apr 1 12:01:45 2006] notifying client 4228[113:113] [Sat Apr 1 12:01:45 2006] executing action "/etc/acpi/power.sh" [Sat Apr 1 12:01:45 2006] BEGIN HANDLER MESSAGES [Sat Apr 1 12:01:45 2006] END HANDLER MESSAGES [Sat Apr 1 12:01:45 2006] action exited with status 0 [Sat Apr 1 12:01:45 2006] completed event "battery BAT0 00000080 00000001" [Sat Apr 1 12:05:36 2006] received event "battery BAT0 00000080 00000001" [Sat Apr 1 12:05:36 2006] notifying client 4228[113:113] [Sat Apr 1 12:05:36 2006] executing action "/etc/acpi/power.sh" [Sat Apr 1 12:05:36 2006] BEGIN HANDLER MESSAGES [Sat Apr 1 12:05:36 2006] END HANDLER MESSAGES [Sat Apr 1 12:05:36 2006] action exited with status 0 [Sat Apr 1 12:05:36 2006] completed event "battery BAT0 00000080 00000001" [Sat Apr 1 12:09:32 2006] received event "battery BAT0 00000080 00000001" [Sat Apr 1 12:09:32 2006] notifying client 4228[113:113] [Sat Apr 1 12:09:32 2006] executing action "/etc/acpi/power.sh" [Sat Apr 1 12:09:32 2006] BEGIN HANDLER MESSAGES [Sat Apr 1 12:09:32 2006] END HANDLER MESSAGES [Sat Apr 1 12:09:32 2006] action exited with status 0 [Sat Apr 1 12:09:32 2006] completed event "battery BAT0 00000080 00000001" [Sat Apr 1 12:13:23 2006] received event "battery BAT0 00000080 00000001" [Sat Apr 1 12:13:23 2006] notifying client 4228[113:113] [Sat Apr 1 12:13:23 2006] executing action "/etc/acpi/power.sh" [Sat Apr 1 12:13:23 2006] BEGIN HANDLER MESSAGES [Sat Apr 1 12:13:23 2006] END HANDLER MESSAGES [Sat Apr 1 12:13:23 2006] action exited with status 0 [Sat Apr 1 12:13:23 2006] completed event "battery BAT0 00000080 00000001" [Sat Apr 1 12:17:14 2006] received event "battery BAT0 00000080 00000001" [Sat Apr 1 12:17:14 2006] notifying client 4228[113:113] [Sat Apr 1 12:17:14 2006] executing action "/etc/acpi/power.sh" [Sat Apr 1 12:17:14 2006] BEGIN HANDLER MESSAGES [Sat Apr 1 12:17:14 2006] END HANDLER MESSAGES [Sat Apr 1 12:17:14 2006] action exited with status 0 [Sat Apr 1 12:17:14 2006] completed event "battery BAT0 00000080 00000001" [Sat Apr 1 12:21:10 2006] received event "battery BAT0 00000080 00000001" [Sat Apr 1 12:21:10 2006] notifying client 4228[113:113] [Sat Apr 1 12:21:10 2006] executing action "/etc/acpi/power.sh" [Sat Apr 1 12:21:10 2006] BEGIN HANDLER MESSAGES [Sat Apr 1 12:21:10 2006] END HANDLER MESSAGES [Sat Apr 1 12:21:10 2006] action exited with status 0 [Sat Apr 1 12:21:10 2006] completed event "battery BAT0 00000080 00000001" [Sat Apr 1 12:25:01 2006] received event "battery BAT0 00000080 00000001" [Sat Apr 1 12:25:01 2006] notifying client 4228[113:113] [Sat Apr 1 12:25:01 2006] executing action "/etc/acpi/power.sh" [Sat Apr 1 12:25:01 2006] BEGIN HANDLER MESSAGES [Sat Apr 1 12:25:01 2006] END HANDLER MESSAGES [Sat Apr 1 12:25:01 2006] action exited with status 0 [Sat Apr 1 12:25:01 2006] completed event "battery BAT0 00000080 00000001" [Sat Apr 1 12:33:34 2006] received event "battery BAT0 00000080 00000001" [Sat Apr 1 12:33:34 2006] notifying client 4228[113:113] [Sat Apr 1 12:33:34 2006] executing action "/etc/acpi/power.sh" [Sat Apr 1 12:33:34 2006] BEGIN HANDLER MESSAGES [Sat Apr 1 12:33:34 2006] END HANDLER MESSAGES [Sat Apr 1 12:33:34 2006] action exited with status 0 [Sat Apr 1 12:33:34 2006] completed event "battery BAT0 00000080 00000001" [Sat Apr 1 12:33:34 2006] received event "processor CPU0 00000080 00000000" [Sat Apr 1 12:33:34 2006] notifying client 4228[113:113] [Sat Apr 1 12:33:34 2006] completed event "processor CPU0 00000080 00000000" [Sat Apr 1 12:33:34 2006] received event "processor CPU0 00000081 00000000" [Sat Apr 1 12:33:34 2006] notifying client 4228[113:113] [Sat Apr 1 12:33:34 2006] completed event "processor CPU0 00000081 00000000" [Sat Apr 1 12:33:37 2006] received event "battery BAT0 00000080 00000001" [Sat Apr 1 12:33:37 2006] notifying client 4228[113:113] [Sat Apr 1 12:33:37 2006] executing action "/etc/acpi/power.sh" [Sat Apr 1 12:33:37 2006] BEGIN HANDLER MESSAGES [Sat Apr 1 12:33:37 2006] END HANDLER MESSAGES [Sat Apr 1 12:33:37 2006] action exited with status 0 [Sat Apr 1 12:33:37 2006] completed event "battery BAT0 00000080 00000001" Laptop mode enabled, active. [Sat Apr 1 12:33:47 2006] received event "battery BAT0 00000080 00000001" [Sat Apr 1 12:33:47 2006] notifying client 4228[113:113] [Sat Apr 1 12:33:47 2006] executing action "/etc/acpi/power.sh" [Sat Apr 1 12:33:47 2006] BEGIN HANDLER MESSAGES [Sat Apr 1 12:33:48 2006] END HANDLER MESSAGES [Sat Apr 1 12:33:48 2006] action exited with status 0 [Sat Apr 1 12:33:48 2006] completed event "battery BAT0 00000080 00000001" [Sat Apr 1 12:33:53 2006] received event "battery BAT0 00000080 00000001" [Sat Apr 1 12:33:53 2006] notifying client 4228[113:113] [Sat Apr 1 12:33:53 2006] executing action "/etc/acpi/power.sh" [Sat Apr 1 12:33:53 2006] BEGIN HANDLER MESSAGES [Sat Apr 1 12:33:53 2006] END HANDLER MESSAGES [Sat Apr 1 12:33:53 2006] action exited with status 0 [Sat Apr 1 12:33:53 2006] completed event "battery BAT0 00000080 00000001" [Sat Apr 1 12:33:54 2006] received event "battery BAT0 00000080 00000001" [Sat Apr 1 12:33:54 2006] notifying client 4228[113:113] [Sat Apr 1 12:33:54 2006] executing action "/etc/acpi/power.sh" [Sat Apr 1 12:33:54 2006] BEGIN HANDLER MESSAGES [Sat Apr 1 12:33:54 2006] END HANDLER MESSAGES [Sat Apr 1 12:33:54 2006] action exited with status 0 [Sat Apr 1 12:33:54 2006] completed event "battery BAT0 00000080 00000001" [Sat Apr 1 12:33:54 2006] received event "processor CPU0 00000080 00000000" [Sat Apr 1 12:33:54 2006] notifying client 4228[113:113] [Sat Apr 1 12:33:54 2006] completed event "processor CPU0 00000080 00000000" [Sat Apr 1 12:33:55 2006] received event "processor CPU0 00000081 00000000" [Sat Apr 1 12:33:55 2006] notifying client 4228[113:113] [Sat Apr 1 12:33:55 2006] completed event "processor CPU0 00000081 00000000" Laptop mode enabled, not active. [Sat Apr 1 12:34:04 2006] received event "battery BAT0 00000080 00000001" [Sat Apr 1 12:34:04 2006] notifying client 4228[113:113] [Sat Apr 1 12:34:04 2006] executing action "/etc/acpi/power.sh" [Sat Apr 1 12:34:04 2006] BEGIN HANDLER MESSAGES [Sat Apr 1 12:34:04 2006] END HANDLER MESSAGES [Sat Apr 1 12:34:04 2006] action exited with status 0 [Sat Apr 1 12:34:04 2006] completed event "battery BAT0 00000080 00000001" [Sat Apr 1 12:34:04 2006] received event "processor CPU0 00000080 00000000" [Sat Apr 1 12:34:04 2006] notifying client 4228[113:113] [Sat Apr 1 12:34:04 2006] completed event "processor CPU0 00000080 00000000" [Sat Apr 1 12:34:04 2006] received event "processor CPU0 00000081 00000000" [Sat Apr 1 12:34:04 2006] notifying client 4228[113:113] [Sat Apr 1 12:34:04 2006] completed event "processor CPU0 00000081 00000000" [Sat Apr 1 12:34:09 2006] received event "battery BAT0 00000080 00000001" [Sat Apr 1 12:34:09 2006] notifying client 4228[113:113] [Sat Apr 1 12:34:09 2006] executing action "/etc/acpi/power.sh" [Sat Apr 1 12:34:09 2006] BEGIN HANDLER MESSAGES [Sat Apr 1 12:34:09 2006] END HANDLER MESSAGES [Sat Apr 1 12:34:09 2006] action exited with status 0 [Sat Apr 1 12:34:09 2006] completed event "battery BAT0 00000080 00000001" Laptop mode enabled, active[Sat Apr 1 12:36:42 2006] starting up [Sat Apr 1 12:36:42 2006] 53 rules loaded [Sat Apr 1 12:36:43 2006] client connected from 4014[113:113] [Sat Apr 1 12:36:43 2006] 1 client rule loaded [Sat Apr 1 12:38:21 2006] received event "processor CPU0 00000080 00000000" [Sat Apr 1 12:38:21 2006] notifying client 4014[113:113] [Sat Apr 1 12:38:21 2006] completed event "processor CPU0 00000080 00000000" [Sat Apr 1 12:38:22 2006] received event "processor CPU0 00000081 00000000" [Sat Apr 1 12:38:22 2006] notifying client 4014[113:113] [Sat Apr 1 12:38:22 2006] completed event "processor CPU0 00000081 00000000" [Sat Apr 1 12:38:22 2006] received event "battery BAT0 00000080 00000001" [Sat Apr 1 12:38:22 2006] notifying client 4014[113:113] [Sat Apr 1 12:38:22 2006] executing action "/etc/acpi/power.sh" [Sat Apr 1 12:38:22 2006] BEGIN HANDLER MESSAGES [Sat Apr 1 12:38:33 2006] END HANDLER MESSAGES [Sat Apr 1 12:38:33 2006] action exited with status 0 [Sat Apr 1 12:38:33 2006] completed event "battery BAT0 00000080 00000001" [Sat Apr 1 12:38:33 2006] received event "battery BAT0 00000081 00000001" [Sat Apr 1 12:38:33 2006] notifying client 4014[113:113] [Sat Apr 1 12:38:33 2006] executing action "/etc/acpi/power.sh" [Sat Apr 1 12:38:33 2006] BEGIN HANDLER MESSAGES [Sat Apr 1 12:38:44 2006] END HANDLER MESSAGES [Sat Apr 1 12:38:44 2006] action exited with status 0 [Sat Apr 1 12:38:44 2006] completed event "battery BAT0 00000081 00000001" [Sat Apr 1 12:38:44 2006] received event "processor CPU0 00000080 00000000" [Sat Apr 1 12:38:44 2006] notifying client 4014[113:113] [Sat Apr 1 12:38:44 2006] completed event "processor CPU0 00000080 00000000" [Sat Apr 1 12:38:44 2006] received event "processor CPU0 00000081 00000000" [Sat Apr 1 12:38:44 2006] notifying client 4014[113:113] [Sat Apr 1 12:38:44 2006] completed event "processor CPU0 00000081 00000000" [Sat Apr 1 12:38:46 2006] received event "battery BAT0 00000080 00000001" [Sat Apr 1 12:38:46 2006] notifying client 4014[113:113] [Sat Apr 1 12:38:46 2006] executing action "/etc/acpi/power.sh" [Sat Apr 1 12:38:46 2006] BEGIN HANDLER MESSAGES [Sat Apr 1 12:38:48 2006] END HANDLER MESSAGES [Sat Apr 1 12:38:48 2006] action exited with status 0 [Sat Apr 1 12:38:48 2006] completed event "battery BAT0 00000080 00000001" [Sat Apr 1 12:38:48 2006] received event "processor CPU0 00000080 00000000" [Sat Apr 1 12:38:48 2006] notifying client 4014[113:113] [Sat Apr 1 12:38:48 2006] completed event "processor CPU0 00000080 00000000" [Sat Apr 1 12:38:48 2006] received event "processor CPU0 00000081 00000000" [Sat Apr 1 12:38:48 2006] notifying client 4014[113:113] [Sat Apr 1 12:38:48 2006] completed event "processor CPU0 00000081 00000000" [Sat Apr 1 12:38:50 2006] received event "button/power PWRF 00000080 00000001" [Sat Apr 1 12:38:50 2006] notifying client 4014[113:113] [Sat Apr 1 12:38:55 2006] executing action "/etc/acpi/powerbtn.sh" [Sat Apr 1 12:38:55 2006] BEGIN HANDLER MESSAGES [Sat Apr 1 12:38:55 2006] END HANDLER MESSAGES [Sat Apr 1 12:38:55 2006] action exited with status 0 [Sat Apr 1 12:38:55 2006] completed event "button/power PWRF 00000080 00000001" [Sat Apr 1 12:39:04 2006] received event "button/power PWRF 00000080 00000002" [Sat Apr 1 12:39:04 2006] notifying client 4014[113:113] [Sat Apr 1 12:39:04 2006] executing action "/etc/acpi/powerbtn.sh" [Sat Apr 1 12:39:04 2006] BEGIN HANDLER MESSAGES [Sat Apr 1 12:39:04 2006] END HANDLER MESSAGES [Sat Apr 1 12:39:04 2006] action exited with status 0 [Sat Apr 1 12:39:04 2006] completed event "button/power PWRF 00000080 00000002" enabled, not active [unchanged]. [Sat Apr 1 20:40:03 2006] starting up [Sat Apr 1 20:40:03 2006] 53 rules loaded [Sat Apr 1 20:40:05 2006] client connected from 4009[113:113] [Sat Apr 1 20:40:05 2006] 1 client rule loaded [Sat Apr 1 12:44:41 2006] starting up [Sat Apr 1 12:44:41 2006] 53 rules loaded [Sat Apr 1 12:44:43 2006] client connected from 4007[113:113] [Sat Apr 1 12:44:43 2006] 1 client rule loaded [Sat Apr 1 12:51:14 2006] received event "battery BAT0 00000080 00000001" [Sat Apr 1 12:51:14 2006] notifying client 4007[113:113] [Sat Apr 1 12:51:14 2006] executing action "/etc/acpi/power.sh" [Sat Apr 1 12:51:14 2006] BEGIN HANDLER MESSAGES [Sat Apr 1 12:51:14 2006] END HANDLER MESSAGES [Sat Apr 1 12:51:14 2006] action exited with status 0 [Sat Apr 1 12:51:14 2006] completed event "battery BAT0 00000080 00000001" [Sat Apr 1 12:58:45 2006] received event "battery BAT0 00000080 00000001" [Sat Apr 1 12:58:45 2006] notifying client 4007[113:113] [Sat Apr 1 12:58:45 2006] executing action "/etc/acpi/power.sh" [Sat Apr 1 12:58:45 2006] BEGIN HANDLER MESSAGES [Sat Apr 1 12:58:45 2006] END HANDLER MESSAGES [Sat Apr 1 12:58:45 2006] action exited with status 0 [Sat Apr 1 12:58:45 2006] completed event "battery BAT0 00000080 00000001" Output of lspci -vv: 0000:00:00.0 Host bridge: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller (rev 03) Subsystem: Sony Corporation: Unknown device 81b7 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- 0000:00:01.0 PCI bridge: Intel Corporation Mobile 915GM/PM Express PCI Express Root Port (rev 03) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Reset- FastB2B- Capabilities: 0000:00:1b.0 0403: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller (rev 03) Subsystem: Sony Corporation: Unknown device 81bb Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- 0000:00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 03) (prog-if 00 [UHCI]) Subsystem: Sony Corporation: Unknown device 81b9 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- 0000:00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev d3) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Reset- FastB2B- Capabilities: 0000:00:1f.0 ISA bridge: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge (rev 03) Subsystem: Sony Corporation: Unknown device 81b9 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- Region 1: I/O ports at Region 2: I/O ports at Region 3: I/O ports at Region 4: I/O ports at 1880 [size=16] 0000:00:1f.3 SMBus: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller (rev 03) Subsystem: Sony Corporation: Unknown device 81b9 Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- 0000:06:03.0 CardBus bridge: Texas Instruments PCI7420 CardBus Controller Subsystem: Sony Corporation: Unknown device 818f Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- Reset+ 16bInt+ PostWrite+ 16-bit legacy interface ports at 0001 0000:06:03.2 FireWire (IEEE 1394): Texas Instruments PCI7x20 1394a-2000 OHCI Two-Port PHY/Link-Layer Controller (prog-if 10 [OHCI]) Subsystem: Sony Corporation: Unknown device 818f Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- 0000:06:03.3 Mass storage controller: Texas Instruments PCI7420/PCI7620 Dual Socket CardBus and Smart Card Cont. w/ 1394a-2000 OHCI Two-Port PHY/Link-Layer Cont. an Subsystem: Sony Corporation: Unknown device 8190 Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- 0000:06:04.0 Network controller: Intel Corporation PRO/Wireless 2200BG (rev 05) Subsystem: Intel Corporation: Unknown device 2751 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- 0000:06:08.0 Ethernet controller: Intel Corporation 82562ET/EZ/GT/GZ - PRO/100 VE (LOM) Ethernet Controller Mobile (rev 03) Subsystem: Sony Corporation: Unknown device 81d0 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: Testing the latest version of Dapper on my Sony VAIO VGN-FS660/W, and both sleep and hibernate do not work. Choosing Logout->Sleep or Hibernate will shut the system down (and the sleep light will flash if I chose sleep), but the machine will not wake up afterwards. All I get is a blank screen. The attached USB mouse still retains power after resuming from sleep, but not after resuming from hibernate. uname -r returns "2.6.15-19-386" I am not sure what else is helpful, so please let me know if I can assist in any other way. Here is the contents of /var/log/acpid: [Sat Apr 1 08:12:27 2006] starting up [Sat Apr 1 08:12:27 2006] 50 rules loaded [Sat Apr 1 08:12:31 2006] client connected from 3897[108:108] [Sat Apr 1 08:12:31 2006] 1 client rule loaded [Sat Apr 1 10:56:36 2006] exiting [Sat Apr 1 10:56:38 2006] starting up [Sat Apr 1 10:56:38 2006] 53 rules loaded [Sat Apr 1 10:56:41 2006] client connected from 3897[108:108] [Sat Apr 1 10:56:41 2006] 1 client rule loaded [Sat Apr 1 11:09:34 2006] exiting [Sat Apr 1 11:12:51 2006] starting up [Sat Apr 1 11:12:51 2006] 53 rules loaded [Sat Apr 1 11:12:53 2006] client connected from 4228[113:113] [Sat Apr 1 11:12:53 2006] 1 client rule loaded [Sat Apr 1 11:41:49 2006] received event "battery BAT0 00000080 00000001" [Sat Apr 1 11:41:49 2006] notifying client 4228[113:113] [Sat Apr 1 11:41:49 2006] executing action "/etc/acpi/power.sh" [Sat Apr 1 11:41:49 2006] BEGIN HANDLER MESSAGES [Sat Apr 1 11:41:50 2006] END HANDLER MESSAGES [Sat Apr 1 11:41:50 2006] action exited with status 0 [Sat Apr 1 11:41:50 2006] completed event "battery BAT0 00000080 00000001" [Sat Apr 1 11:41:50 2006] received event "processor CPU0 00000080 00000000" [Sat Apr 1 11:41:50 2006] notifying client 4228[113:113] [Sat Apr 1 11:41:50 2006] completed event "processor CPU0 00000080 00000000" [Sat Apr 1 11:41:50 2006] received event "processor CPU0 00000081 00000000" [Sat Apr 1 11:41:50 2006] notifying client 4228[113:113] [Sat Apr 1 11:41:50 2006] completed event "processor CPU0 00000081 00000000" [Sat Apr 1 11:41:53 2006] received event "battery BAT0 00000080 00000001" [Sat Apr 1 11:41:53 2006] notifying client 4228[113:113] [Sat Apr 1 11:41:53 2006] executing action "/etc/acpi/power.sh" [Sat Apr 1 11:41:53 2006] BEGIN HANDLER MESSAGES [Sat Apr 1 11:41:53 2006] END HANDLER MESSAGES [Sat Apr 1 11:41:53 2006] action exited with status 0 [Sat Apr 1 11:41:53 2006] completed event "battery BAT0 00000080 00000001" Laptop mode enabled, active. [Sat Apr 1 11:41:59 2006] received event "battery BAT0 00000080 00000001" [Sat Apr 1 11:41:59 2006] notifying client 4228[113:113] [Sat Apr 1 11:41:59 2006] executing action "/etc/acpi/power.sh" [Sat Apr 1 11:41:59 2006] BEGIN HANDLER MESSAGES [Sat Apr 1 11:41:59 2006] END HANDLER MESSAGES [Sat Apr 1 11:41:59 2006] action exited with status 0 [Sat Apr 1 11:41:59 2006] completed event "battery BAT0 00000080 00000001" [Sat Apr 1 11:42:09 2006] received event "battery BAT0 00000080 00000001" [Sat Apr 1 11:42:09 2006] notifying client 4228[113:113] [Sat Apr 1 11:42:09 2006] executing action "/etc/acpi/power.sh" [Sat Apr 1 11:42:09 2006] BEGIN HANDLER MESSAGES [Sat Apr 1 11:42:09 2006] END HANDLER MESSAGES [Sat Apr 1 11:42:09 2006] action exited with status 0 [Sat Apr 1 11:42:09 2006] completed event "battery BAT0 00000080 00000001" [Sat Apr 1 11:42:15 2006] received event "battery BAT0 00000080 00000001" [Sat Apr 1 11:42:15 2006] notifying client 4228[113:113] [Sat Apr 1 11:42:15 2006] executing action "/etc/acpi/power.sh" [Sat Apr 1 11:42:15 2006] BEGIN HANDLER MESSAGES [Sat Apr 1 11:42:15 2006] END HANDLER MESSAGES [Sat Apr 1 11:42:15 2006] action exited with status 0 [Sat Apr 1 11:42:15 2006] completed event "battery BAT0 00000080 00000001" [Sat Apr 1 11:42:25 2006] received event "battery BAT0 00000080 00000001" [Sat Apr 1 11:42:25 2006] notifying client 4228[113:113] [Sat Apr 1 11:42:25 2006] executing action "/etc/acpi/power.sh" [Sat Apr 1 11:42:25 2006] BEGIN HANDLER MESSAGES [Sat Apr 1 11:42:26 2006] END HANDLER MESSAGES [Sat Apr 1 11:42:26 2006] action exited with status 0 [Sat Apr 1 11:42:26 2006] completed event "battery BAT0 00000080 00000001" [Sat Apr 1 11:42:36 2006] received event "battery BAT0 00000080 00000001" [Sat Apr 1 11:42:36 2006] notifying client 4228[113:113] [Sat Apr 1 11:42:36 2006] executing action "/etc/acpi/power.sh" [Sat Apr 1 11:42:36 2006] BEGIN HANDLER MESSAGES [Sat Apr 1 11:42:36 2006] END HANDLER MESSAGES [Sat Apr 1 11:42:36 2006] action exited with status 0 [Sat Apr 1 11:42:36 2006] completed event "battery BAT0 00000080 00000001" [Sat Apr 1 11:42:52 2006] received event "battery BAT0 00000080 00000001" [Sat Apr 1 11:42:52 2006] notifying client 4228[113:113] [Sat Apr 1 11:42:52 2006] executing action "/etc/acpi/power.sh" [Sat Apr 1 11:42:52 2006] BEGIN HANDLER MESSAGES [Sat Apr 1 11:42:52 2006] END HANDLER MESSAGES [Sat Apr 1 11:42:52 2006] action exited with status 0 [Sat Apr 1 11:42:52 2006] completed event "battery BAT0 00000080 00000001" [Sat Apr 1 11:43:14 2006] received event "battery BAT0 00000080 00000001" [Sat Apr 1 11:43:14 2006] notifying client 4228[113:113] [Sat Apr 1 11:43:14 2006] executing action "/etc/acpi/power.sh" [Sat Apr 1 11:43:14 2006] BEGIN HANDLER MESSAGES [Sat Apr 1 11:43:14 2006] END HANDLER MESSAGES [Sat Apr 1 11:43:14 2006] action exited with status 0 [Sat Apr 1 11:43:14 2006] completed event "battery BAT0 00000080 00000001" [Sat Apr 1 11:43:19 2006] received event "battery BAT0 00000080 00000001" [Sat Apr 1 11:43:19 2006] notifying client 4228[113:113] [Sat Apr 1 11:43:19 2006] executing action "/etc/acpi/power.sh" [Sat Apr 1 11:43:19 2006] BEGIN HANDLER MESSAGES [Sat Apr 1 11:43:19 2006] END HANDLER MESSAGES [Sat Apr 1 11:43:19 2006] action exited with status 0 [Sat Apr 1 11:43:19 2006] completed event "battery BAT0 00000080 00000001" [Sat Apr 1 11:43:30 2006] received event "battery BAT0 00000080 00000001" [Sat Apr 1 11:43:30 2006] notifying client 4228[113:113] [Sat Apr 1 11:43:30 2006] executing action "/etc/acpi/power.sh" [Sat Apr 1 11:43:30 2006] BEGIN HANDLER MESSAGES [Sat Apr 1 11:43:30 2006] END HANDLER MESSAGES [Sat Apr 1 11:43:30 2006] action exited with status 0 [Sat Apr 1 11:43:30 2006] completed event "battery BAT0 00000080 00000001" [Sat Apr 1 11:43:40 2006] received event "battery BAT0 00000080 00000001" [Sat Apr 1 11:43:40 2006] notifying client 4228[113:113] [Sat Apr 1 11:43:40 2006] executing action "/etc/acpi/power.sh" [Sat Apr 1 11:43:40 2006] BEGIN HANDLER MESSAGES [Sat Apr 1 11:43:40 2006] END HANDLER MESSAGES [Sat Apr 1 11:43:40 2006] action exited with status 0 [Sat Apr 1 11:43:40 2006] completed event "battery BAT0 00000080 00000001" [Sat Apr 1 11:43:40 2006] received event "processor CPU0 00000080 00000000" [Sat Apr 1 11:43:40 2006] notifying client 4228[113:113] [Sat Apr 1 11:43:40 2006] completed event "processor CPU0 00000080 00000000" [Sat Apr 1 11:43:41 2006] received event "processor CPU0 00000081 00000000" [Sat Apr 1 11:43:41 2006] notifying client 4228[113:113] [Sat Apr 1 11:43:41 2006] completed event "processor CPU0 00000081 00000000" Laptop mode enabled, not active. [Sat Apr 1 11:45:17 2006] received event "battery BAT0 00000080 00000001" [Sat Apr 1 11:45:17 2006] notifying client 4228[113:113] [Sat Apr 1 11:45:17 2006] executing action "/etc/acpi/power.sh" [Sat Apr 1 11:45:17 2006] BEGIN HANDLER MESSAGES [Sat Apr 1 11:45:17 2006] END HANDLER MESSAGES [Sat Apr 1 11:45:17 2006] action exited with status 0 [Sat Apr 1 11:45:17 2006] completed event "battery BAT0 00000080 00000001" [Sat Apr 1 11:52:05 2006] received event "battery BAT0 00000080 00000001" [Sat Apr 1 11:52:05 2006] notifying client 4228[113:113] [Sat Apr 1 11:52:05 2006] executing action "/etc/acpi/power.sh" [Sat Apr 1 11:52:05 2006] BEGIN HANDLER MESSAGES [Sat Apr 1 11:52:05 2006] END HANDLER MESSAGES [Sat Apr 1 11:52:05 2006] action exited with status 0 [Sat Apr 1 11:52:05 2006] completed event "battery BAT0 00000080 00000001" [Sat Apr 1 11:57:54 2006] received event "battery BAT0 00000080 00000001" [Sat Apr 1 11:57:54 2006] notifying client 4228[113:113] [Sat Apr 1 11:57:54 2006] executing action "/etc/acpi/power.sh" [Sat Apr 1 11:57:54 2006] BEGIN HANDLER MESSAGES [Sat Apr 1 11:57:55 2006] END HANDLER MESSAGES [Sat Apr 1 11:57:55 2006] action exited with status 0 [Sat Apr 1 11:57:55 2006] completed event "battery BAT0 00000080 00000001" [Sat Apr 1 12:01:45 2006] received event "battery BAT0 00000080 00000001" [Sat Apr 1 12:01:45 2006] notifying client 4228[113:113] [Sat Apr 1 12:01:45 2006] executing action "/etc/acpi/power.sh" [Sat Apr 1 12:01:45 2006] BEGIN HANDLER MESSAGES [Sat Apr 1 12:01:45 2006] END HANDLER MESSAGES [Sat Apr 1 12:01:45 2006] action exited with status 0 [Sat Apr 1 12:01:45 2006] completed event "battery BAT0 00000080 00000001" [Sat Apr 1 12:05:36 2006] received event "battery BAT0 00000080 00000001" [Sat Apr 1 12:05:36 2006] notifying client 4228[113:113] [Sat Apr 1 12:05:36 2006] executing action "/etc/acpi/power.sh" [Sat Apr 1 12:05:36 2006] BEGIN HANDLER MESSAGES [Sat Apr 1 12:05:36 2006] END HANDLER MESSAGES [Sat Apr 1 12:05:36 2006] action exited with status 0 [Sat Apr 1 12:05:36 2006] completed event "battery BAT0 00000080 00000001" [Sat Apr 1 12:09:32 2006] received event "battery BAT0 00000080 00000001" [Sat Apr 1 12:09:32 2006] notifying client 4228[113:113] [Sat Apr 1 12:09:32 2006] executing action "/etc/acpi/power.sh" [Sat Apr 1 12:09:32 2006] BEGIN HANDLER MESSAGES [Sat Apr 1 12:09:32 2006] END HANDLER MESSAGES [Sat Apr 1 12:09:32 2006] action exited with status 0 [Sat Apr 1 12:09:32 2006] completed event "battery BAT0 00000080 00000001" [Sat Apr 1 12:13:23 2006] received event "battery BAT0 00000080 00000001" [Sat Apr 1 12:13:23 2006] notifying client 4228[113:113] [Sat Apr 1 12:13:23 2006] executing action "/etc/acpi/power.sh" [Sat Apr 1 12:13:23 2006] BEGIN HANDLER MESSAGES [Sat Apr 1 12:13:23 2006] END HANDLER MESSAGES [Sat Apr 1 12:13:23 2006] action exited with status 0 [Sat Apr 1 12:13:23 2006] completed event "battery BAT0 00000080 00000001" [Sat Apr 1 12:17:14 2006] received event "battery BAT0 00000080 00000001" [Sat Apr 1 12:17:14 2006] notifying client 4228[113:113] [Sat Apr 1 12:17:14 2006] executing action "/etc/acpi/power.sh" [Sat Apr 1 12:17:14 2006] BEGIN HANDLER MESSAGES [Sat Apr 1 12:17:14 2006] END HANDLER MESSAGES [Sat Apr 1 12:17:14 2006] action exited with status 0 [Sat Apr 1 12:17:14 2006] completed event "battery BAT0 00000080 00000001" [Sat Apr 1 12:21:10 2006] received event "battery BAT0 00000080 00000001" [Sat Apr 1 12:21:10 2006] notifying client 4228[113:113] [Sat Apr 1 12:21:10 2006] executing action "/etc/acpi/power.sh" [Sat Apr 1 12:21:10 2006] BEGIN HANDLER MESSAGES [Sat Apr 1 12:21:10 2006] END HANDLER MESSAGES [Sat Apr 1 12:21:10 2006] action exited with status 0 [Sat Apr 1 12:21:10 2006] completed event "battery BAT0 00000080 00000001" [Sat Apr 1 12:25:01 2006] received event "battery BAT0 00000080 00000001" [Sat Apr 1 12:25:01 2006] notifying client 4228[113:113] [Sat Apr 1 12:25:01 2006] executing action "/etc/acpi/power.sh" [Sat Apr 1 12:25:01 2006] BEGIN HANDLER MESSAGES [Sat Apr 1 12:25:01 2006] END HANDLER MESSAGES [Sat Apr 1 12:25:01 2006] action exited with status 0 [Sat Apr 1 12:25:01 2006] completed event "battery BAT0 00000080 00000001" [Sat Apr 1 12:33:34 2006] received event "battery BAT0 00000080 00000001" [Sat Apr 1 12:33:34 2006] notifying client 4228[113:113] [Sat Apr 1 12:33:34 2006] executing action "/etc/acpi/power.sh" [Sat Apr 1 12:33:34 2006] BEGIN HANDLER MESSAGES [Sat Apr 1 12:33:34 2006] END HANDLER MESSAGES [Sat Apr 1 12:33:34 2006] action exited with status 0 [Sat Apr 1 12:33:34 2006] completed event "battery BAT0 00000080 00000001" [Sat Apr 1 12:33:34 2006] received event "processor CPU0 00000080 00000000" [Sat Apr 1 12:33:34 2006] notifying client 4228[113:113] [Sat Apr 1 12:33:34 2006] completed event "processor CPU0 00000080 00000000" [Sat Apr 1 12:33:34 2006] received event "processor CPU0 00000081 00000000" [Sat Apr 1 12:33:34 2006] notifying client 4228[113:113] [Sat Apr 1 12:33:34 2006] completed event "processor CPU0 00000081 00000000" [Sat Apr 1 12:33:37 2006] received event "battery BAT0 00000080 00000001" [Sat Apr 1 12:33:37 2006] notifying client 4228[113:113] [Sat Apr 1 12:33:37 2006] executing action "/etc/acpi/power.sh" [Sat Apr 1 12:33:37 2006] BEGIN HANDLER MESSAGES [Sat Apr 1 12:33:37 2006] END HANDLER MESSAGES [Sat Apr 1 12:33:37 2006] action exited with status 0 [Sat Apr 1 12:33:37 2006] completed event "battery BAT0 00000080 00000001" Laptop mode enabled, active. [Sat Apr 1 12:33:47 2006] received event "battery BAT0 00000080 00000001" [Sat Apr 1 12:33:47 2006] notifying client 4228[113:113] [Sat Apr 1 12:33:47 2006] executing action "/etc/acpi/power.sh" [Sat Apr 1 12:33:47 2006] BEGIN HANDLER MESSAGES [Sat Apr 1 12:33:48 2006] END HANDLER MESSAGES [Sat Apr 1 12:33:48 2006] action exited with status 0 [Sat Apr 1 12:33:48 2006] completed event "battery BAT0 00000080 00000001" [Sat Apr 1 12:33:53 2006] received event "battery BAT0 00000080 00000001" [Sat Apr 1 12:33:53 2006] notifying client 4228[113:113] [Sat Apr 1 12:33:53 2006] executing action "/etc/acpi/power.sh" [Sat Apr 1 12:33:53 2006] BEGIN HANDLER MESSAGES [Sat Apr 1 12:33:53 2006] END HANDLER MESSAGES [Sat Apr 1 12:33:53 2006] action exited with status 0 [Sat Apr 1 12:33:53 2006] completed event "battery BAT0 00000080 00000001" [Sat Apr 1 12:33:54 2006] received event "battery BAT0 00000080 00000001" [Sat Apr 1 12:33:54 2006] notifying client 4228[113:113] [Sat Apr 1 12:33:54 2006] executing action "/etc/acpi/power.sh" [Sat Apr 1 12:33:54 2006] BEGIN HANDLER MESSAGES [Sat Apr 1 12:33:54 2006] END HANDLER MESSAGES [Sat Apr 1 12:33:54 2006] action exited with status 0 [Sat Apr 1 12:33:54 2006] completed event "battery BAT0 00000080 00000001" [Sat Apr 1 12:33:54 2006] received event "processor CPU0 00000080 00000000" [Sat Apr 1 12:33:54 2006] notifying client 4228[113:113] [Sat Apr 1 12:33:54 2006] completed event "processor CPU0 00000080 00000000" [Sat Apr 1 12:33:55 2006] received event "processor CPU0 00000081 00000000" [Sat Apr 1 12:33:55 2006] notifying client 4228[113:113] [Sat Apr 1 12:33:55 2006] completed event "processor CPU0 00000081 00000000" Laptop mode enabled, not active. [Sat Apr 1 12:34:04 2006] received event "battery BAT0 00000080 00000001" [Sat Apr 1 12:34:04 2006] notifying client 4228[113:113] [Sat Apr 1 12:34:04 2006] executing action "/etc/acpi/power.sh" [Sat Apr 1 12:34:04 2006] BEGIN HANDLER MESSAGES [Sat Apr 1 12:34:04 2006] END HANDLER MESSAGES [Sat Apr 1 12:34:04 2006] action exited with status 0 [Sat Apr 1 12:34:04 2006] completed event "battery BAT0 00000080 00000001" [Sat Apr 1 12:34:04 2006] received event "processor CPU0 00000080 00000000" [Sat Apr 1 12:34:04 2006] notifying client 4228[113:113] [Sat Apr 1 12:34:04 2006] completed event "processor CPU0 00000080 00000000" [Sat Apr 1 12:34:04 2006] received event "processor CPU0 00000081 00000000" [Sat Apr 1 12:34:04 2006] notifying client 4228[113:113] [Sat Apr 1 12:34:04 2006] completed event "processor CPU0 00000081 00000000" [Sat Apr 1 12:34:09 2006] received event "battery BAT0 00000080 00000001" [Sat Apr 1 12:34:09 2006] notifying client 4228[113:113] [Sat Apr 1 12:34:09 2006] executing action "/etc/acpi/power.sh" [Sat Apr 1 12:34:09 2006] BEGIN HANDLER MESSAGES [Sat Apr 1 12:34:09 2006] END HANDLER MESSAGES [Sat Apr 1 12:34:09 2006] action exited with status 0 [Sat Apr 1 12:34:09 2006] completed event "battery BAT0 00000080 00000001" Laptop mode enabled, active[Sat Apr 1 12:36:42 2006] starting up [Sat Apr 1 12:36:42 2006] 53 rules loaded [Sat Apr 1 12:36:43 2006] client connected from 4014[113:113] [Sat Apr 1 12:36:43 2006] 1 client rule loaded [Sat Apr 1 12:38:21 2006] received event "processor CPU0 00000080 00000000" [Sat Apr 1 12:38:21 2006] notifying client 4014[113:113] [Sat Apr 1 12:38:21 2006] completed event "processor CPU0 00000080 00000000" [Sat Apr 1 12:38:22 2006] received event "processor CPU0 00000081 00000000" [Sat Apr 1 12:38:22 2006] notifying client 4014[113:113] [Sat Apr 1 12:38:22 2006] completed event "processor CPU0 00000081 00000000" [Sat Apr 1 12:38:22 2006] received event "battery BAT0 00000080 00000001" [Sat Apr 1 12:38:22 2006] notifying client 4014[113:113] [Sat Apr 1 12:38:22 2006] executing action "/etc/acpi/power.sh" [Sat Apr 1 12:38:22 2006] BEGIN HANDLER MESSAGES [Sat Apr 1 12:38:33 2006] END HANDLER MESSAGES [Sat Apr 1 12:38:33 2006] action exited with status 0 [Sat Apr 1 12:38:33 2006] completed event "battery BAT0 00000080 00000001" [Sat Apr 1 12:38:33 2006] received event "battery BAT0 00000081 00000001" [Sat Apr 1 12:38:33 2006] notifying client 4014[113:113] [Sat Apr 1 12:38:33 2006] executing action "/etc/acpi/power.sh" [Sat Apr 1 12:38:33 2006] BEGIN HANDLER MESSAGES [Sat Apr 1 12:38:44 2006] END HANDLER MESSAGES [Sat Apr 1 12:38:44 2006] action exited with status 0 [Sat Apr 1 12:38:44 2006] completed event "battery BAT0 00000081 00000001" [Sat Apr 1 12:38:44 2006] received event "processor CPU0 00000080 00000000" [Sat Apr 1 12:38:44 2006] notifying client 4014[113:113] [Sat Apr 1 12:38:44 2006] completed event "processor CPU0 00000080 00000000" [Sat Apr 1 12:38:44 2006] received event "processor CPU0 00000081 00000000" [Sat Apr 1 12:38:44 2006] notifying client 4014[113:113] [Sat Apr 1 12:38:44 2006] completed event "processor CPU0 00000081 00000000" [Sat Apr 1 12:38:46 2006] received event "battery BAT0 00000080 00000001" [Sat Apr 1 12:38:46 2006] notifying client 4014[113:113] [Sat Apr 1 12:38:46 2006] executing action "/etc/acpi/power.sh" [Sat Apr 1 12:38:46 2006] BEGIN HANDLER MESSAGES [Sat Apr 1 12:38:48 2006] END HANDLER MESSAGES [Sat Apr 1 12:38:48 2006] action exited with status 0 [Sat Apr 1 12:38:48 2006] completed event "battery BAT0 00000080 00000001" [Sat Apr 1 12:38:48 2006] received event "processor CPU0 00000080 00000000" [Sat Apr 1 12:38:48 2006] notifying client 4014[113:113] [Sat Apr 1 12:38:48 2006] completed event "processor CPU0 00000080 00000000" [Sat Apr 1 12:38:48 2006] received event "processor CPU0 00000081 00000000" [Sat Apr 1 12:38:48 2006] notifying client 4014[113:113] [Sat Apr 1 12:38:48 2006] completed event "processor CPU0 00000081 00000000" [Sat Apr 1 12:38:50 2006] received event "button/power PWRF 00000080 00000001" [Sat Apr 1 12:38:50 2006] notifying client 4014[113:113] [Sat Apr 1 12:38:55 2006] executing action "/etc/acpi/powerbtn.sh" [Sat Apr 1 12:38:55 2006] BEGIN HANDLER MESSAGES [Sat Apr 1 12:38:55 2006] END HANDLER MESSAGES [Sat Apr 1 12:38:55 2006] action exited with status 0 [Sat Apr 1 12:38:55 2006] completed event "button/power PWRF 00000080 00000001" [Sat Apr 1 12:39:04 2006] received event "button/power PWRF 00000080 00000002" [Sat Apr 1 12:39:04 2006] notifying client 4014[113:113] [Sat Apr 1 12:39:04 2006] executing action "/etc/acpi/powerbtn.sh" [Sat Apr 1 12:39:04 2006] BEGIN HANDLER MESSAGES [Sat Apr 1 12:39:04 2006] END HANDLER MESSAGES [Sat Apr 1 12:39:04 2006] action exited with status 0 [Sat Apr 1 12:39:04 2006] completed event "button/power PWRF 00000080 00000002" enabled, not active [unchanged]. [Sat Apr 1 20:40:03 2006] starting up [Sat Apr 1 20:40:03 2006] 53 rules loaded [Sat Apr 1 20:40:05 2006] client connected from 4009[113:113] [Sat Apr 1 20:40:05 2006] 1 client rule loaded [Sat Apr 1 12:44:41 2006] starting up [Sat Apr 1 12:44:41 2006] 53 rules loaded [Sat Apr 1 12:44:43 2006] client connected from 4007[113:113] [Sat Apr 1 12:44:43 2006] 1 client rule loaded [Sat Apr 1 12:51:14 2006] received event "battery BAT0 00000080 00000001" [Sat Apr 1 12:51:14 2006] notifying client 4007[113:113] [Sat Apr 1 12:51:14 2006] executing action "/etc/acpi/power.sh" [Sat Apr 1 12:51:14 2006] BEGIN HANDLER MESSAGES [Sat Apr 1 12:51:14 2006] END HANDLER MESSAGES [Sat Apr 1 12:51:14 2006] action exited with status 0 [Sat Apr 1 12:51:14 2006] completed event "battery BAT0 00000080 00000001" [Sat Apr 1 12:58:45 2006] received event "battery BAT0 00000080 00000001" [Sat Apr 1 12:58:45 2006] notifying client 4007[113:113] [Sat Apr 1 12:58:45 2006] executing action "/etc/acpi/power.sh" [Sat Apr 1 12:58:45 2006] BEGIN HANDLER MESSAGES [Sat Apr 1 12:58:45 2006] END HANDLER MESSAGES [Sat Apr 1 12:58:45 2006] action exited with status 0 [Sat Apr 1 12:58:45 2006] completed event "battery BAT0 00000080 00000001" Output of lspci -vv: 0000:00:00.0 Host bridge: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller (rev 03) Subsystem: Sony Corporation: Unknown device 81b7 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- 0000:00:01.0 PCI bridge: Intel Corporation Mobile 915GM/PM Express PCI Express Root Port (rev 03) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Reset- FastB2B- Capabilities: 0000:00:1b.0 0403: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller (rev 03) Subsystem: Sony Corporation: Unknown device 81bb Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- 0000:00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 03) (prog-if 00 [UHCI]) Subsystem: Sony Corporation: Unknown device 81b9 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- 0000:00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev d3) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Reset- FastB2B- Capabilities: 0000:00:1f.0 ISA bridge: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge (rev 03) Subsystem: Sony Corporation: Unknown device 81b9 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- Region 1: I/O ports at Region 2: I/O ports at Region 3: I/O ports at Region 4: I/O ports at 1880 [size=16] 0000:00:1f.3 SMBus: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller (rev 03) Subsystem: Sony Corporation: Unknown device 81b9 Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- 0000:06:03.0 CardBus bridge: Texas Instruments PCI7420 CardBus Controller Subsystem: Sony Corporation: Unknown device 818f Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- Reset+ 16bInt+ PostWrite+ 16-bit legacy interface ports at 0001 0000:06:03.2 FireWire (IEEE 1394): Texas Instruments PCI7x20 1394a-2000 OHCI Two-Port PHY/Link-Layer Controller (prog-if 10 [OHCI]) Subsystem: Sony Corporation: Unknown device 818f Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- 0000:06:03.3 Mass storage controller: Texas Instruments PCI7420/PCI7620 Dual Socket CardBus and Smart Card Cont. w/ 1394a-2000 OHCI Two-Port PHY/Link-Layer Cont. an Subsystem: Sony Corporation: Unknown device 8190 Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- 0000:06:04.0 Network controller: Intel Corporation PRO/Wireless 2200BG (rev 05) Subsystem: Intel Corporation: Unknown device 2751 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- 0000:06:08.0 Ethernet controller: Intel Corporation 82562ET/EZ/GT/GZ - PRO/100 VE (LOM) Ethernet Controller Mobile (rev 03) Subsystem: Sony Corporation: Unknown device 81d0 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- -- Sleep/Hibernate do not work on Sony VAIO VGN-FS660/W in Dapper https://launchpad.net/malone/bugs/37642 From viriiguy at gmail.com Wed Apr 5 01:17:04 2006 From: viriiguy at gmail.com (ViriiGuy) Date: Wed, 05 Apr 2006 01:17:04 -0000 Subject: [Bug 37765] Re: No matter what it simply will not connect. It scan and sees the networks, but it cannot connect. References: <20060402194212.5415.86136.malonedeb@gangotri.ubuntu.com> Message-ID: <20060405011704.25542.83068.malone@gangotri.ubuntu.com> Whoops!! I don't know exactly how that happened. My bad. -- No matter what it simply will not connect. It scan and sees the networks, but it cannot connect. https://launchpad.net/malone/bugs/37765 From adconrad at 0c3.net Wed Apr 5 01:16:01 2006 From: adconrad at 0c3.net (Adam Conrad) Date: Wed, 05 Apr 2006 01:16:01 -0000 Subject: [Bug 32504] Re: LCD Out of Range during graphical boot References: <20060222194110.15743.11424.malonedeb@gandwana.ubuntu.com> Message-ID: <20060405011601.25542.5640.malone@gangotri.ubuntu.com> Can you confirm for sure that it says "35.7KHz/80Hz"? Also, is this on a classic PC system, with an Award/AMI/Phoenix BIOS? Do the BIOS screens show up during boot just fine? -- LCD Out of Range during graphical boot https://launchpad.net/malone/bugs/32504 From mjg59 at codon.org.uk Wed Apr 5 01:22:20 2006 From: mjg59 at codon.org.uk (Matthew Garrett) Date: Wed, 05 Apr 2006 01:22:20 -0000 Subject: [Bug 37642] Re: Sleep/Hibernate do not work on Sony VAIO VGN-FS660/W in Dapper References: <20060401212742.5441.63396.malonedeb@gangotri.ubuntu.com> Message-ID: <20060405012221.25542.97564.launchpad@gangotri.ubuntu.com> ** Changed in: acpi-support (Ubuntu) Sourcepackagename: acpi-support => linux-source-2.6.15 -- Sleep/Hibernate do not work on Sony VAIO VGN-FS660/W in Dapper https://launchpad.net/malone/bugs/37642 From scott at ubuntu.com Wed Apr 5 01:24:43 2006 From: scott at ubuntu.com (Scott James Remnant) Date: Wed, 05 Apr 2006 01:24:43 -0000 Subject: [Bug 35795] Re: Kernel hangs on Acer travelmate Laptops References: <20060321002339.22884.75529.malonedeb@gangotri.ubuntu.com> Message-ID: <20060405012443.14572.24264.launchpad@gandwana.ubuntu.com> ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Fix Committed => Fix Released -- Kernel hangs on Acer travelmate Laptops https://launchpad.net/malone/bugs/35795 From scott at ubuntu.com Wed Apr 5 01:23:44 2006 From: scott at ubuntu.com (Scott James Remnant) Date: Wed, 05 Apr 2006 01:23:44 -0000 Subject: [Bug 27842] Re: [dapper] Live and install CDs hang detecting network hardware on M810 system References: <20060113151932.29386.56805.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060405012345.14649.53245.launchpad@gandwana.ubuntu.com> ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Fix Committed => Fix Released -- [dapper] Live and install CDs hang detecting network hardware on M810 system https://launchpad.net/malone/bugs/27842 From burner at suppressingfire.org Wed Apr 5 01:34:09 2006 From: burner at suppressingfire.org (Michael R. Head) Date: Wed, 05 Apr 2006 01:34:09 -0000 Subject: [Bug 38109] [dapper] g4-based Mac Mini's bcm43xx wireless fails to work References: <20060405013409.25542.83349.malonedeb@gangotri.ubuntu.com> Message-ID: <20060405013409.25542.83349.malonedeb@gangotri.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: I've got a powerpc Mac Mini and the bcm43xx driver doesn't seem to work. I have obtained a copy of the necessary firmware, as far as I know, but I can't convince dhclient to obtain a DHCP address, and when I set a static address, I can't ping other addresses on the same subnet. Oddly, network-manager can detect the networks in my area, but when I select my local (open) wireless, nm-applet spins until it obtains an address via autoconf. It also is unable to determine the link quality on the local networks (it finds the names, but the link quality bars go to 100%). Here are the lspci lines: 0001:10:12.0 Network controller: Broadcom Corporation BCM4306 802.11b/g Wireless LAN Controller (rev 03) Subsystem: Apple Computer Inc. AirPort Extreme Flags: bus master, fast devsel, latency 16, IRQ 52 Memory at 80084000 (32-bit, non-prefetchable) [size=8K] Capabilities: -- [dapper] g4-based Mac Mini's bcm43xx wireless fails to work https://launchpad.net/malone/bugs/38109 From scott at ubuntu.com Wed Apr 5 01:39:43 2006 From: scott at ubuntu.com (Scott James Remnant) Date: Wed, 05 Apr 2006 01:39:43 -0000 Subject: [Bug 6354] Re: Onboard ALC655 soundcard not supported References: <20060102002823.29335.6537.malonedeb@gangotri.ubuntu.com> Message-ID: <20060405013943.25542.50992.launchpad@gangotri.ubuntu.com> ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Fix Committed => Fix Released -- Onboard ALC655 soundcard not supported https://launchpad.net/malone/bugs/6354 From scott at ubuntu.com Wed Apr 5 01:48:00 2006 From: scott at ubuntu.com (Scott James Remnant) Date: Wed, 05 Apr 2006 01:48:00 -0000 Subject: [Bug 28691] Re: amd64 kernel locks on firewire ipod unplugging References: <20060116152545.30333.48749.malonedeb@gangotri.ubuntu.com> Message-ID: <20060405014801.25515.42441.launchpad@gangotri.ubuntu.com> ** Changed in: linux-source-2.6.12 (Ubuntu) Status: Fix Committed => Fix Released -- amd64 kernel locks on firewire ipod unplugging https://launchpad.net/malone/bugs/28691 From scott at ubuntu.com Wed Apr 5 01:46:58 2006 From: scott at ubuntu.com (Scott James Remnant) Date: Wed, 05 Apr 2006 01:46:58 -0000 Subject: [Bug 28647] Re: sbp2 hot plug causes hard crashes References: <20060116010423.6087.7224.malonedeb@gangotri.ubuntu.com> Message-ID: <20060405014658.25515.86164.launchpad@gangotri.ubuntu.com> ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Fix Committed => Fix Released -- sbp2 hot plug causes hard crashes https://launchpad.net/malone/bugs/28647 From mdz at ubuntu.com Wed Apr 5 01:51:58 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Wed, 05 Apr 2006 01:51:58 -0000 Subject: [Bug 33008] Re: Time/Date problem-Gnome-panel crash-Xserver problem References: <20060227042310.27067.3552.malonedeb@gangotri.ubuntu.com> Message-ID: <20060405015159.25515.55345.launchpad@gangotri.ubuntu.com> *** This bug is a duplicate of bug 29420 *** ** This bug has been marked a duplicate of bug 29420 Strange clock behaviour on powerpc-smp -- Time/Date problem-Gnome-panel crash-Xserver problem https://launchpad.net/malone/bugs/33008 From mdz at ubuntu.com Wed Apr 5 01:51:58 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Wed, 05 Apr 2006 01:51:58 -0000 Subject: [Bug 29420] Re: Strange clock behaviour on powerpc-smp References: <20060123071446.16602.91711.malonedeb@gandwana.ubuntu.com> Message-ID: <20060405015159.25515.33345.launchpad@gangotri.ubuntu.com> ** Bug 33008 has been marked a duplicate of this bug -- Strange clock behaviour on powerpc-smp https://launchpad.net/malone/bugs/29420 From mdz at ubuntu.com Wed Apr 5 02:03:15 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Wed, 05 Apr 2006 02:03:15 -0000 Subject: [Bug 33162] Re: Acer Travel Mate 3210 needs acpi=off References: <20060228154534.17498.22123.malonedeb@gangotri.ubuntu.com> Message-ID: <20060405020315.25542.84857.launchpad@gangotri.ubuntu.com> ** Summary changed: - dapper does not has an intuitive noacpi option + Acer Travel Mate 3210 needs acpi=off ** Changed in: debian-installer (Ubuntu) Sourcepackagename: debian-installer => linux-source-2.6.15 Assignee: (unassigned) => Ben Collins -- Acer Travel Mate 3210 needs acpi=off https://launchpad.net/malone/bugs/33162 From mdz at ubuntu.com Wed Apr 5 02:05:03 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Wed, 05 Apr 2006 02:05:03 -0000 Subject: [Bug 33142] Re: Wrong boot hdd is selected in installer References: <20060228115839.17498.71156.malonedeb@gangotri.ubuntu.com> Message-ID: <20060405020503.25515.92493.launchpad@gangotri.ubuntu.com> *** This bug is a duplicate of bug 21412 *** ** This bug has been marked a duplicate of bug 21412 Default update-grub behaviour is not intuitive -- Wrong boot hdd is selected in installer https://launchpad.net/malone/bugs/33142 From mdz at ubuntu.com Wed Apr 5 02:05:03 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Wed, 05 Apr 2006 02:05:03 -0000 Subject: [Bug 21412] Re: Default update-grub behaviour is not intuitive References: <20060113141241.21012.46008.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060405020503.25515.83923.launchpad@gangotri.ubuntu.com> ** Bug 33142 has been marked a duplicate of this bug -- Default update-grub behaviour is not intuitive https://launchpad.net/malone/bugs/21412 From mdz at ubuntu.com Wed Apr 5 02:07:05 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Wed, 05 Apr 2006 02:07:05 -0000 Subject: [Bug 33122] Re: ppp_mppe randomly loses the plot References: <20060228053721.16580.72241.malonedeb@gandwana.ubuntu.com> Message-ID: <20060405020705.14649.32944.launchpad@gandwana.ubuntu.com> ** Changed in: linux-meta linux-image-2.6-386 (Ubuntu) Assignee: (unassigned) => Ben Collins -- ppp_mppe randomly loses the plot https://launchpad.net/malone/bugs/33122 From mdz at ubuntu.com Wed Apr 5 02:07:40 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Wed, 05 Apr 2006 02:07:40 -0000 Subject: [Bug 33096] Re: "DVICO Fusion HDTV DVB Plus" tv tuner card will not lock on to channel References: <20060227230332.16580.85365.malonedeb@gandwana.ubuntu.com> Message-ID: <20060405020740.14649.69119.launchpad@gandwana.ubuntu.com> ** Changed in: linux-source-2.6.15 linux-image-2.6.15-16-amd64-k8 (Ubuntu) Assignee: (unassigned) => Ben Collins -- "DVICO Fusion HDTV DVB Plus" tv tuner card will not lock on to channel https://launchpad.net/malone/bugs/33096 From scott at ubuntu.com Wed Apr 5 02:14:46 2006 From: scott at ubuntu.com (Scott James Remnant) Date: Wed, 05 Apr 2006 02:14:46 -0000 Subject: [Bug 19542] Re: (Breezy) Promise PDC20378 PATA Support Gone? References: <20060113140214.21012.98107.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060405021446.25515.13606.launchpad@gangotri.ubuntu.com> ** Changed in: linux-meta (Ubuntu) Status: Fix Committed => Fix Released -- (Breezy) Promise PDC20378 PATA Support Gone? https://launchpad.net/malone/bugs/19542 From mdz at ubuntu.com Wed Apr 5 02:15:51 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Wed, 05 Apr 2006 02:15:51 -0000 Subject: [Bug 33243] Re: /lib/modules//volatile remains mounted on tmpfs References: <20060301110100.22115.62705.malonedeb@gandwana.ubuntu.com> Message-ID: <20060405021551.14572.63552.malone@gandwana.ubuntu.com> This is intentional and not a bug. ** Changed in: linux-meta linux (Ubuntu) Sourcepackagename: linux-meta => linux-restricted-modules-2.6.15 Binarypackagename: linux => None Severity: Normal => Wishlist Status: Unconfirmed => Confirmed ** Summary changed: - /lib/modules//volatile remains mounted on tmpfs + tmpfs setup is unexpected -- tmpfs setup is unexpected https://launchpad.net/malone/bugs/33243 From mdz at ubuntu.com Wed Apr 5 02:19:14 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Wed, 05 Apr 2006 02:19:14 -0000 Subject: [Bug 33196] Re: reboot/shutting down hangs on ToshibaSatelliteL10-120 References: <20060228221014.17525.39189.malonedeb@gangotri.ubuntu.com> Message-ID: <20060405021914.14649.52977.launchpad@gandwana.ubuntu.com> ** Changed in: linux-source-2.6.15 (Ubuntu) Assignee: (unassigned) => Ben Collins -- reboot/shutting down hangs on ToshibaSatelliteL10-120 https://launchpad.net/malone/bugs/33196 From mdz at ubuntu.com Wed Apr 5 02:18:51 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Wed, 05 Apr 2006 02:18:51 -0000 Subject: [Bug 33204] Re: PCI-Express Cards not working References: <20060301012201.22115.51286.malonedeb@gandwana.ubuntu.com> Message-ID: <20060405021851.25515.88895.launchpad@gangotri.ubuntu.com> ** Changed in: linux-source-2.6.15 (Ubuntu) Assignee: (unassigned) => Ben Collins -- PCI-Express Cards not working https://launchpad.net/malone/bugs/33204 From scott at ubuntu.com Wed Apr 5 02:17:08 2006 From: scott at ubuntu.com (Scott James Remnant) Date: Wed, 05 Apr 2006 02:17:08 -0000 Subject: [Bug 20723] Re: Sound looping on VIA chipset without "noapic" References: <20060113140850.21012.875.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060405021708.25542.93372.launchpad@gangotri.ubuntu.com> ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Fix Committed => Fix Released -- Sound looping on VIA chipset without "noapic" https://launchpad.net/malone/bugs/20723 From scott at ubuntu.com Wed Apr 5 02:15:15 2006 From: scott at ubuntu.com (Scott James Remnant) Date: Wed, 05 Apr 2006 02:15:15 -0000 Subject: [Bug 20332] Re: Plextor PX-71SA doesn't work with kernel version 2.6.12 References: <20060113140647.21012.75610.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060405021515.25515.24863.launchpad@gangotri.ubuntu.com> ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Fix Committed => Fix Released -- Plextor PX-71SA doesn't work with kernel version 2.6.12 https://launchpad.net/malone/bugs/20332 From benoit.ansieau at wanadoo.fr Wed Apr 5 02:31:23 2006 From: benoit.ansieau at wanadoo.fr (Benoit) Date: Wed, 05 Apr 2006 02:31:23 -0000 Subject: [Bug 31926] Nidiswrapper / acx_pci conflict. References: <20060218233809.833.64474.malonedeb@gandwana.ubuntu.com> Message-ID: <20060405023123.25542.7422.launchpad@canonical@gangotri.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Assignee: Ben Collins Status: Needs Info Description: Some wirlesse card, like Netgear WG311 don't work with the acx_pci driver, but have an acx chipset. Il work good with ndiswrapper. But the problem was the acx_pci driver is the first loaded and "lock" the card. Ndiswrapper and wireless card don't work. It was posible to delete or inibate the acx_pci driver ? Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Assignee: Ben Collins Status: Needs Info Description: Some wirlesse card, like Netgear WG311 don't work with the acx_pci driver, but have an acx chipset. Il work good with ndiswrapper. But the problem was the acx_pci driver is the first loaded and "lock" the card. Ndiswrapper and wireless card don't work. It was posible to delete or inibate the acx_pci driver ? -- Nidiswrapper / acx_pci conflict. https://launchpad.net/malone/bugs/31926 From mdz at ubuntu.com Wed Apr 5 02:31:23 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Wed, 05 Apr 2006 02:31:23 -0000 Subject: [Bug 31926] Re: Nidiswrapper / acx_pci conflict. References: <20060218233809.833.64474.malonedeb@gandwana.ubuntu.com> Message-ID: <20060405023123.25542.48173.malone@gangotri.ubuntu.com> If acx_pci declares support for your card (which it does, if it was automatically loaded), then either there is a bug which should be fixed, or the driver should not list your card. It is better to report this situation and get it fixed than to work around the problem. Please send "lspci" and "lspci -n" output showing the card ** Changed in: ndiswrapper (Ubuntu) Sourcepackagename: ndiswrapper => linux-source-2.6.15 Assignee: (unassigned) => Ben Collins Status: Unconfirmed => Needs Info -- Nidiswrapper / acx_pci conflict. https://launchpad.net/malone/bugs/31926 From clarkec8 at hotmail.com Wed Apr 5 02:51:28 2006 From: clarkec8 at hotmail.com (listerthrawn) Date: Wed, 05 Apr 2006 02:51:28 -0000 Subject: [Bug 32175] Laptop segfaults when shut down References: <20060220195431.795.64162.malonedeb@gandwana.ubuntu.com> Message-ID: <20060405025128.14649.76258.launchpad@canonical@gandwana.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Needs Info Description: The computer segfaults when the halt instruction is issued from within S90shutdown. This appears to be an acpi issue as when I boot with acpi=off as a kernel variable it does not do this. It doesn't shut the computer down, just halts it. It also messes up my audio. Laptop is a NEC Versa S260 This effects both Breezy and Dapper Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Needs Info Description: The computer segfaults when the halt instruction is issued from within S90shutdown. This appears to be an acpi issue as when I boot with acpi=off as a kernel variable it does not do this. It doesn't shut the computer down, just halts it. It also messes up my audio. Laptop is a NEC Versa S260 This effects both Breezy and Dapper -- Laptop segfaults when shut down https://launchpad.net/malone/bugs/32175 From shingarov at ca.istop.com Wed Apr 5 02:53:10 2006 From: shingarov at ca.istop.com (shingarov) Date: Wed, 05 Apr 2006 02:53:10 -0000 Subject: [Bug 32081] Kernel crash accessing a SCSI disk as regular user, after upgrading userland from Hoary to Breezy References: <20060220050635.833.12258.malonedeb@gandwana.ubuntu.com> Message-ID: <20060405025310.25542.51963.launchpad@canonical@gangotri.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Assignee: Ben Collins Status: Unconfirmed Description: Had a Hoary/AMD64 installation running fine on an IBM eServer xSeries 226 (model 8648-1AU with 2 Xeon Nocona CPUs, 1GB RAM and an AIC7902 SCSI HBA). Ubuntu-built EM64-SMP kernel image, as well as custom built vanilla kernels worked fine. After performing an upgrade to Breezy, the system boots up fine but when I attempt to log in as a normal user, a flurry of SCSI errors comes and the system is inpoerable. HOWEVER, if I first log in as root, and touch the /home filesystem which is mounted on the SCSI disk (e.g. by doing ls /home), everything works fine, and after that I can log in as a normal user. After a few minutes, however, the SCSI error will be back again, and the only possible action would be cutting power. The next boot, the machine may or may not be operable, resulting in the SCSI error at the stage of fscking the unclean partition, with the same output (see below). After that, I can only repair the machine by booting into SuSE which I have on another drive, and issue an fsck on /dev/hdb1. Sorry I am not sure even which package to log this against. There was no kernel change at the time of userland upgrade, and this problem is happening with different kernel versions some of which (2.6.13.4-vanilla and 2.6.8.1-vanilla) are exactly the same as what I use in SuSE and that works just fine. Full kernel output follows: Bootdata ok (command line is root=/dev/sda3 ro console=tty0 vga=0x318 ide0=ata66) Linux version 2.6.13.4 (root at parmenides) (gcc version 4.0.2 20050808 (prerelease) (Ubuntu 4.0.1-4ubuntu9)) #11 SMP Sat Dec 24 21:36:07 EST 2005 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009b400 (usable) BIOS-e820: 000000000009b400 - 00000000000a0000 (reserved) BIOS-e820: 00000000000d0000 - 00000000000dc000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003ff60000 (usable) BIOS-e820: 000000003ff60000 - 000000003ff76000 (ACPI data) BIOS-e820: 000000003ff76000 - 000000003ff80000 (ACPI NVS) BIOS-e820: 000000003ff80000 - 0000000040000000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ff800000 - 00000000ffc00000 (reserved) BIOS-e820: 00000000fffffc00 - 0000000100000000 (reserved) ACPI: RSDP (v000 PTLTD ) @ 0x00000000000f6c30 ACPI: RSDT (v001 PTLTD RSDT 0x06040000 LTP 0x00000000) @ 0x000000003ff70c64 ACPI: FADT (v001 INTEL LINDHRST 0x06040000 PTL 0x00000003) @ 0x000000003ff75d91 ACPI: MCFG (v001 PTLTD MCFG 0x06040000 LTP 0x00000000) @ 0x000000003ff75e05 ACPI: SPCR (v001 PTLTD $UCRTBL$ 0x06040000 PTL 0x00000001) @ 0x000000003ff75e45 ACPI: MADT (v001 PTLTD APIC 0x06040000 LTP 0x00000000) @ 0x000000003ff75e95 ACPI: BOOT (v001 PTLTD $SBFTBL$ 0x06040000 LTP 0x00000001) @ 0x000000003ff75f31 ACPI: ASF! (v032 MBI 0x06040000 0x00000000) @ 0x000000003ff75f59 ACPI: SSDT (v001 PmRef CpuPm 0x00003000 INTL 0x20030224) @ 0x000000003ff70ca4 ACPI: DSDT (v001 Intel LINDHRST 0x06040000 MSFT 0x0100000e) @ 0x0000000000000000 On node 0 totalpages: 261883 DMA zone: 3995 pages, LIFO batch:1 Normal zone: 257888 pages, LIFO batch:31 HighMem zone: 0 pages, LIFO batch:1 ACPI: PM-Timer IO Port: 0x1008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 15:3 APIC version 16 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x06] enabled) Processor #6 15:3 APIC version 16 ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) Processor #1 15:3 APIC version 16 ACPI: LAPIC (acpi_id[0x03] lapic_id[0x07] enabled) Processor #7 15:3 APIC version 16 ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 ACPI: IOAPIC (id[0x03] address[0xfec81000] gsi_base[24]) IOAPIC[1]: apic_id 3, version 32, address 0xfec81000, GSI 24-47 ACPI: IOAPIC (id[0x04] address[0xfec81400] gsi_base[48]) IOAPIC[2]: apic_id 4, version 32, address 0xfec81400, GSI 48-71 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Setting APIC routing to flat Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 40000000 (gap: 40000000:a0000000) Built 1 zonelists Kernel command line: root=/dev/sda3 ro console=tty0 vga=0x318 ide0=ata66 ide_setup: ide0=ata66 -- OBSOLETE OPTION, WILL BE REMOVED SOON! Initializing CPU#0 PID hash table entries: 4096 (order: 12, 131072 bytes) time.c: Using 3.579545 MHz PM timer. time.c: Detected 3000.242 MHz processor. Console: colour dummy device 80x25 Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) Memory: 1027348k/1047936k available (1969k kernel code, 19940k reserved, 1169k data, 172k init) Calibrating delay using timer specific routine.. 6009.02 BogoMIPS (lpj=12018040) Security Framework v1.0.0 initialized Mount-cache hash table entries: 256 CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 1024K using mwait in idle threads. CPU: Physical Processor ID: 0 CPU0: Thermal monitoring enabled (TM1) mtrr: v2.0 (20020519) Using local APIC timer interrupts. Detected 12.500 MHz APIC timer. Booting processor 1/4 APIC 0x6 Initializing CPU#1 Calibrating delay using timer specific routine.. 6000.67 BogoMIPS (lpj=12001342) CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 1024K CPU: Physical Processor ID: 3 CPU1: Thermal monitoring enabled (TM1) Intel(R) Xeon(TM) CPU 3.00GHz stepping 04 APIC error on CPU1: 00(40) CPU 1: Syncing TSC to CPU 0. CPU 1: synchronized TSC with CPU 0 (last diff 12 cycles, maxerr 1192 cycles) Booting processor 2/4 APIC 0x1 Initializing CPU#2 Calibrating delay using timer specific routine.. 6000.72 BogoMIPS (lpj=12001456) CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 1024K CPU: Physical Processor ID: 0 CPU2: Thermal monitoring enabled (TM1) Intel(R) Xeon(TM) CPU 3.00GHz stepping 04 APIC error on CPU2: 00(40) CPU 2: Syncing TSC to CPU 0. CPU 2: synchronized TSC with CPU 0 (last diff -146 cycles, maxerr 930 cycles) Booting processor 3/4 APIC 0x7 Initializing CPU#3 Calibrating delay using timer specific routine.. 6000.77 BogoMIPS (lpj=12001540) CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 1024K CPU: Physical Processor ID: 3 CPU3: Thermal monitoring enabled (TM1) Intel(R) Xeon(TM) CPU 3.00GHz stepping 04 APIC error on CPU3: 00(40) CPU 3: Syncing TSC to CPU 0. CPU 3: synchronized TSC with CPU 0 (last diff 15 cycles, maxerr 1192 cycles) Brought up 4 CPUs time.c: Using PIT/TSC based timekeeping. testing NMI watchdog ... OK. NET: Registered protocol family 16 ACPI: bus type pci registered PCI: Using configuration type 1 ACPI: Subsystem revision 20050408 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) ACPI: Assume root bridge [\_SB_.PCI0] segment is 0 PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 PCI: PXH quirk detected, disabling MSI for SHPC device PCI: PXH quirk detected, disabling MSI for SHPC device Boot video device is 0000:05:00.0 PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3.PXHA._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3.PXHB._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 6 7 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 14 15) ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 6 7 *10 11 14 15) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 11 devices SCSI subsystem initialized usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report PCI: Bridge: 0000:00:02.0 IO window: disabled. MEM window: c0100000-c01fffff PREFETCH window: disabled. PCI: Bridge: 0000:02:00.0 IO window: 2000-2fff MEM window: c0300000-c03fffff PREFETCH window: 40000000-400fffff PCI: Bridge: 0000:02:00.2 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:03.0 IO window: 2000-2fff MEM window: c0200000-c03fffff PREFETCH window: 40000000-400fffff PCI: Bridge: 0000:00:04.0 IO window: disabled. MEM window: c1000000-c7ffffff PREFETCH window: d0000000-d7ffffff PCI: Bridge: 0000:00:1e.0 IO window: 3000-3fff MEM window: c8000000-c80fffff PREFETCH window: d8000000-dfffffff ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:02.0 to 64 ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:03.0 to 64 PCI: Setting latency timer of device 0000:02:00.0 to 64 PCI: Setting latency timer of device 0000:02:00.2 to 64 ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:04.0 to 64 PCI: Setting latency timer of device 0000:00:1e.0 to 64 Simple Boot Flag at 0x39 set to 0x1 IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $ Initializing Cryptographic API ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:02.0 to 64 Allocate Port Service[pcie00] ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:03.0 to 64 Allocate Port Service[pcie00] ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:04.0 to 64 Allocate Port Service[pcie00] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc20000080000, using 6144k, total 131072k vesafb: mode is 1024x768x32, linelength=4096, pages=1 vesafb: scrolling: redraw vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 Console: switching to colour frame buffer device 128x48 fb0: VESA VGA frame buffer device Real Time Clock Driver v1.12 [drm] Initialized drm 1.0.0 20040925 PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH5: IDE controller at PCI slot 0000:00:1f.1 ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 17 ICH5: chipset revision 2 ICH5: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x14a0-0x14a7, BIOS settings: hda:DMA, hdb:pio Probing IDE interface ide0... hda: PIONEER DVD-RW DVR-110D, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... Probing IDE interface ide2... Probing IDE interface ide3... Probing IDE interface ide4... Probing IDE interface ide5... hda: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2000kB Cache, UDMA(66) Uniform CD-ROM driver Revision: 3.20 libata version 1.12 loaded. ata_piix version 1.04 ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 18 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1f.2 to 64 ata1: SATA max UDMA/133 cmd 0x14E0 ctl 0x14DA bmdma 0x14B0 irq 17 ata2: SATA max UDMA/133 cmd 0x14D0 ctl 0x14C6 bmdma 0x14B8 irq 17 ata1: dev 0 cfg 49:2f00 82:7c6b 83:7b09 84:4003 85:7c69 86:3a01 87:4003 88:207f ata1: dev 0 ATA, max UDMA/133, 240121728 sectors: ata1: dev 0 configured for UDMA/133 scsi0 : ata_piix ata2: SATA port has no device. scsi1 : ata_piix Vendor: ATA Model: Maxtor 6Y120M0 Rev: YAR5 Type: Direct-Access ANSI SCSI revision: 05 SCSI device sda: 240121728 512-byte hdwr sectors (122942 MB) SCSI device sda: drive cache: write back SCSI device sda: 240121728 512-byte hdwr sectors (122942 MB) SCSI device sda: drive cache: write back sda: sda1 sda2 sda3 Attached scsi disk sda at scsi0, channel 0, id 0, lun 0 Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0, type 0 usbmon: debugfs is not available NET: Registered protocol family 2 input: AT Translated Set 2 keyboard on isa0060/serio0 IP route cache hash table entries: 32768 (order: 6, 262144 bytes) TCP established hash table entries: 131072 (order: 9, 2097152 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered TCP bic registered EXT3-fs: INFO: recovery required on readonly filesystem. EXT3-fs: write access will be enabled during recovery. kjournald starting. Commit interval 5 seconds EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 172k freed NET: Registered protocol family 1 Adding 979952k swap on /dev/sda2. Priority:-1 extents:1 EXT3 FS on sda3, internal journal ACPI: PCI Interrupt 0000:03:03.0[A] -> GSI 30 (level, low) -> IRQ 18 ACPI: PCI Interrupt 0000:03:03.1[B] -> GSI 31 (level, low) -> IRQ 19 scsi2 : Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev 1.3.11 aic7902: Ultra320 Wide Channel A, SCSI Id=7, PCI-X 67-100Mhz, 512 SCBs scsi3 : Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev 1.3.11 aic7902: Ultra320 Wide Channel B, SCSI Id=7, PCI-X 67-100Mhz, 512 SCBs (scsi3:A:3): 320.000MB/s transfers (160.000MHz RDSTRM|DT|IU|RTI, 16bit) Vendor: IBM-ESXS Model: ST336607LC FN Rev: B25H Type: Direct-Access ANSI SCSI revision: 03 scsi3:A:3:0: Tagged Queuing enabled. Depth 32 SCSI device sdb: 71096640 512-byte hdwr sectors (36401 MB) SCSI device sdb: drive cache: write through SCSI device sdb: 71096640 512-byte hdwr sectors (36401 MB) SCSI device sdb: drive cache: write through sdb: sdb1 Attached scsi disk sdb at scsi3, channel 0, id 3, lun 0 Attached scsi generic sg1 at scsi3, channel 0, id 3, lun 0, type 0 Vendor: IBM Model: 02R0980a S320 1 Rev: 1 Type: Processor ANSI SCSI revision: 02 Attached scsi generic sg2 at scsi3, channel 0, id 8, lun 0, type 3 mice: PS/2 mouse device common for all mice nvidia: module license 'NVIDIA' taints kernel. ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:05:00.0 to 64 NVRM: loading NVIDIA Linux x86_64 NVIDIA Kernel Module 1.0-7676 Fri Jul 29 13:15:16 PDT 2005 cdrom: open failed. SCSI error : <3 0 3 0> return code = 0x10 end_request: I/O error, dev sdb, sector 1315928 Buffer I/O error on device sdb1, logical block 164487 scsi3:0:3:0: Attempting to abort cmd ffff81003eaa5a80: 0x28 0x0 0x0 0x3a 0x22 0x70 0x0 0x0 0x8 0x0 scsi3: At time of recovery, card was not paused >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<< scsi3: Dumping Card State at program address 0x21 Mode 0x33 Card was paused HS_MAILBOX[0x0] INTCTL[0x80]:(SWTMINTMASK) SEQINTSTAT[0x0] SAVED_MODE[0x11] DFFSTAT[0x33]:(CURRFIFO_NONE|FIFO0FREE|FIFO1FREE) SCSISIGI[0x86]:(P_COMMAND|REQI|BSYI) SCSIPHASE[0x0] SCSIBUS[0x0] LASTPHASE[0x1]:(P_DATAOUT|P_BUSFREE) SCSISEQ0[0x0] SCSISEQ1[0x12]:(ENAUTOATNP|ENRSELI) SEQCTL0[0x0] SEQINTCTL[0x0] SEQ_FLAGS[0xc0]:(NO_CDB_SENT|NOT_IDENTIFIED) SEQ_FLAGS2[0x0] SSTAT0[0x0] SSTAT1[0x8]:(BUSFREE) SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0x0] SIMODE1[0xa4]:(ENSCSIPERR|ENSCSIRST|ENSELTIMO) LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0] LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0xe1]:(LQOSTOP0|LQOPKT) SCB Count = 4 CMDS_PENDING = 2 LASTSCB 0x3 CURRSCB 0x3 NEXTSCB 0xff80 qinstart = 96 qinfifonext = 96 QINFIFO: WAITING_TID_QUEUES: 3 ( 0x3 ) Pending list: 3 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x37] 2 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x37] Total 2 Kernel Free SCB list: 1 0 Sequencer Complete DMA-inprog list: Sequencer Complete list: Sequencer DMA-Up and Complete list: scsi3: FIFO0 Free, LONGJMP == 0x8251, SCB 0x3 SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS) SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL) SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0] SOFFCNT[0x0] MDFFSTAT[0x5]:(FIFOFREE|DLZERO) SHADDR = 0x00, SHCNT = 0x0 HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL) scsi3: FIFO1 Free, LONGJMP == 0x8261, SCB 0x3 SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS) SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL) SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0] SOFFCNT[0x0] MDFFSTAT[0x5]:(FIFOFREE|DLZERO) SHADDR = 0x00, SHCNT = 0x0 HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL) LQIN: 0x8 0x0 0x0 0x3 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0xc 0x0 0x0 0x0 0x0 scsi3: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52 scsi3: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x2 SIMODE0[0xc]:(ENOVERRUN|ENIOERR) CCSCBCTL[0x4]:(CCSCBDIR) scsi3: REG0 == 0x3, SINDEX = 0x108, DINDEX = 0x108 scsi3: SCBPTR == 0x3, SCB_NEXT == 0xffc0, SCB_NEXT2 == 0xff50 CDB 28 0 0 14 14 60 STACK: 0x13 0x0 0x0 0x0 0x0 0x0 0x0 0x0 <<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>> DevQ(0:3:0): 0 waiting DevQ(0:8:0): 0 waiting scsi3:0:3:0: Cmd aborted from QINFIFO scsi3:0:3:0: Attempting to abort cmd ffff81003eaa5a80: 0x0 0x0 0x0 0x0 0x0 0x0 scsi3: At time of recovery, card was not paused >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<< scsi3: Dumping Card State at program address 0x12 Mode 0x33 Card was paused HS_MAILBOX[0x0] INTCTL[0x80]:(SWTMINTMASK) SEQINTSTAT[0x0] SAVED_MODE[0x11] DFFSTAT[0x33]:(CURRFIFO_NONE|FIFO0FREE|FIFO1FREE) SCSISIGI[0x86]:(P_COMMAND|REQI|BSYI) SCSIPHASE[0x0] SCSIBUS[0x0] LASTPHASE[0x1]:(P_DATAOUT|P_BUSFREE) SCSISEQ0[0x0] SCSISEQ1[0x12]:(ENAUTOATNP|ENRSELI) SEQCTL0[0x0] SEQINTCTL[0x0] SEQ_FLAGS[0xc0]:(NO_CDB_SENT|NOT_IDENTIFIED) SEQ_FLAGS2[0x0] SSTAT0[0x0] SSTAT1[0x8]:(BUSFREE) SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0x0] SIMODE1[0xa4]:(ENSCSIPERR|ENSCSIRST|ENSELTIMO) LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0] LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0xe1]:(LQOSTOP0|LQOPKT) SCB Count = 4 CMDS_PENDING = 2 LASTSCB 0x3 CURRSCB 0x3 NEXTSCB 0xff80 qinstart = 97 qinfifonext = 97 QINFIFO: WAITING_TID_QUEUES: 3 ( 0x3 ) Pending list: 3 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x37] 2 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x37] Total 2 Kernel Free SCB list: 1 0 Sequencer Complete DMA-inprog list: Sequencer Complete list: Sequencer DMA-Up and Complete list: scsi3: FIFO0 Free, LONGJMP == 0x8251, SCB 0x3 SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS) SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL) SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0] SOFFCNT[0x0] MDFFSTAT[0x5]:(FIFOFREE|DLZERO) SHADDR = 0x00, SHCNT = 0x0 HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL) scsi3: FIFO1 Free, LONGJMP == 0x8261, SCB 0x3 SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS) SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL) SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0] SOFFCNT[0x0] MDFFSTAT[0x5]:(FIFOFREE|DLZERO) SHADDR = 0x00, SHCNT = 0x0 HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL) LQIN: 0x8 0x0 0x0 0x3 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0xc 0x0 0x0 0x0 0x0 scsi3: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52 scsi3: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x2 SIMODE0[0xc]:(ENOVERRUN|ENIOERR) CCSCBCTL[0x4]:(CCSCBDIR) scsi3: REG0 == 0x3, SINDEX = 0x108, DINDEX = 0x108 scsi3: SCBPTR == 0x3, SCB_NEXT == 0xff80, SCB_NEXT2 == 0xff50 CDB 0 0 0 0 0 0 STACK: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 <<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>> DevQ(0:3:0): 0 waiting DevQ(0:8:0): 0 waiting scsi3:0:3:0: Cmd aborted from QINFIFO scsi3:0:3:0: Attempting to abort cmd ffff81003eaa5880: 0x28 0x0 0x0 0x14 0x14 0x60 0x0 0x0 0x78 0x0 scsi3:0:3:0: Command not found scsi3:0:3:0: Attempting to abort cmd ffff81003eaa5880: 0x0 0x0 0x0 0x0 0x0 0x0 scsi3: At time of recovery, card was not paused >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<< scsi3: Dumping Card State at program address 0x26 Mode 0x22 Card was paused HS_MAILBOX[0x0] INTCTL[0x80]:(SWTMINTMASK) SEQINTSTAT[0x0] SAVED_MODE[0x11] DFFSTAT[0x33]:(CURRFIFO_NONE|FIFO0FREE|FIFO1FREE) SCSISIGI[0x86]:(P_COMMAND|REQI|BSYI) SCSIPHASE[0x0] SCSIBUS[0x0] LASTPHASE[0x1]:(P_DATAOUT|P_BUSFREE) SCSISEQ0[0x0] SCSISEQ1[0x12]:(ENAUTOATNP|ENRSELI) SEQCTL0[0x0] SEQINTCTL[0x0] SEQ_FLAGS[0xc0]:(NO_CDB_SENT|NOT_IDENTIFIED) SEQ_FLAGS2[0x0] SSTAT0[0x0] SSTAT1[0x0] SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0x0] SIMODE1[0xa4]:(ENSCSIPERR|ENSCSIRST|ENSELTIMO) LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0] LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0xe1]:(LQOSTOP0|LQOPKT) SCB Count = 4 CMDS_PENDING = 2 LASTSCB 0x3 CURRSCB 0x3 NEXTSCB 0xff80 qinstart = 98 qinfifonext = 98 QINFIFO: WAITING_TID_QUEUES: 3 ( 0x3 ) Pending list: 3 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x37] 2 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x37] Total 2 Kernel Free SCB list: 1 0 Sequencer Complete DMA-inprog list: Sequencer Complete list: Sequencer DMA-Up and Complete list: scsi3: FIFO0 Free, LONGJMP == 0x8251, SCB 0x3 SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS) SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL) SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0] SOFFCNT[0x0] MDFFSTAT[0x5]:(FIFOFREE|DLZERO) SHADDR = 0x00, SHCNT = 0x0 HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL) scsi3: FIFO1 Free, LONGJMP == 0x8261, SCB 0x3 SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS) SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL) SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0] SOFFCNT[0x0] MDFFSTAT[0x5]:(FIFOFREE|DLZERO) SHADDR = 0x00, SHCNT = 0x0 HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL) LQIN: 0x8 0x0 0x0 0x3 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0xc 0x0 0x0 0x0 0x0 scsi3: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52 scsi3: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x2 SIMODE0[0xc]:(ENOVERRUN|ENIOERR) CCSCBCTL[0x4]:(CCSCBDIR) scsi3: REG0 == 0x3, SINDEX = 0x108, DINDEX = 0x108 scsi3: SCBPTR == 0xff00, SCB_NEXT == 0xff00, SCB_NEXT2 == 0x0 CDB 0 1 0 0 0 0 STACK: 0x14 0x0 0x0 0x0 0x0 0x0 0x0 0x0 <<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>> DevQ(0:3:0): 0 waiting DevQ(0:8:0): 0 waiting scsi3:0:3:0: Cmd aborted from QINFIFO Recovery code sleeping Recovery code awake Timer Expired scsi3: Device reset returning 0x2003 Recovery SCB completes scsi3:0:3:0: Attempting to abort cmd ffff81003eaa5a80: 0x0 0x0 0x0 0x0 0x0 0x0 scsi3: At time of recovery, card was not paused >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<< scsi3: Dumping Card State at program address 0x26 Mode 0x33 Card was paused HS_MAILBOX[0x0] INTCTL[0x80]:(SWTMINTMASK) SEQINTSTAT[0x0] SAVED_MODE[0x11] DFFSTAT[0x24]:(CURRFIFO_0|FIFO1FREE) SCSISIGI[0x64]:(P_DATAIN_DT|BSYI) SCSIPHASE[0x0] SCSIBUS[0x3a] LASTPHASE[0x1]:(P_DATAOUT|P_BUSFREE) SCSISEQ0[0x0] SCSISEQ1[0x12]:(ENAUTOATNP|ENRSELI) SEQCTL0[0x0] SEQINTCTL[0x0] SEQ_FLAGS[0x0] SEQ_FLAGS2[0x4]:(SELECTOUT_QFROZEN) SSTAT0[0x0] SSTAT1[0x8]:(BUSFREE) SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0x0] SIMODE1[0xa4]:(ENSCSIPERR|ENSCSIRST|ENSELTIMO) LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x80]:(PACKETIZED) LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0xe1]:(LQOSTOP0|LQOPKT) SCB Count = 4 CMDS_PENDING = 1 LASTSCB 0x3 CURRSCB 0x2 NEXTSCB 0xff80 qinstart = 101 qinfifonext = 101 QINFIFO: WAITING_TID_QUEUES: Pending list: 2 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x37] Total 1 Kernel Free SCB list: 3 1 0 Sequencer Complete DMA-inprog list: Sequencer Complete list: Sequencer DMA-Up and Complete list: scsi3: FIFO0 Active, LONGJMP == 0x261, SCB 0x2 SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS) SEQINTSRC[0x0] DFCNTRL[0x28]:(HDMAEN|SCSIEN) DFSTATUS[0x80]:(PRELOAD_AVAIL) SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0] SOFFCNT[0x0] MDFFSTAT[0xc]:(DLZERO|SHVALID) SHADDR = 0x03d9f321e, SHCNT = 0xe2 HADDR = 0x03d9f3200, HCNT = 0x100 CCSGCTL[0x10]:(SG_CACHE_AVAIL) scsi3: FIFO1 Free, LONGJMP == 0x8061, SCB 0x3 SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS) SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL) SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0] SOFFCNT[0x0] MDFFSTAT[0x5]:(FIFOFREE|DLZERO) SHADDR = 0x00, SHCNT = 0x0 HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL) LQIN: 0x8 0x0 0x0 0x2 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x1e 0x0 0x0 0x0 0x0 scsi3: LQISTATE = 0x2a, LQOSTATE = 0x0, OPTIONMODE = 0x52 scsi3: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x1 SIMODE0[0xc]:(ENOVERRUN|ENIOERR) CCSCBCTL[0x4]:(CCSCBDIR) scsi3: REG0 == 0x3, SINDEX = 0x108, DINDEX = 0x108 scsi3: SCBPTR == 0x2, SCB_NEXT == 0xff80, SCB_NEXT2 == 0xff50 CDB 0 0 0 0 0 0 STACK: 0x12 0x0 0x0 0x0 0x0 0x0 0x0 0x0 <<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>> DevQ(0:3:0): 0 waiting DevQ(0:8:0): 0 waiting scsi3:0:3:0: Unable to deliver message scsi3:0:3:0: Attempting to abort cmd ffff81003eaa5880: 0x0 0x0 0x0 0x0 0x0 0x0 scsi3: At time of recovery, card was not paused >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<< scsi3: Dumping Card State at program address 0x12 Mode 0x33 Card was paused HS_MAILBOX[0x0] INTCTL[0x80]:(SWTMINTMASK) SEQINTSTAT[0x0] SAVED_MODE[0x11] DFFSTAT[0x24]:(CURRFIFO_0|FIFO1FREE) SCSISIGI[0x64]:(P_DATAIN_DT|BSYI) SCSIPHASE[0x0] SCSIBUS[0x3a] LASTPHASE[0x1]:(P_DATAOUT|P_BUSFREE) SCSISEQ0[0x0] SCSISEQ1[0x12]:(ENAUTOATNP|ENRSELI) SEQCTL0[0x0] SEQINTCTL[0x0] SEQ_FLAGS[0x0] SEQ_FLAGS2[0x4]:(SELECTOUT_QFROZEN) SSTAT0[0x0] SSTAT1[0x8]:(BUSFREE) SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0x0] SIMODE1[0xa4]:(ENSCSIPERR|ENSCSIRST|ENSELTIMO) LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x80]:(PACKETIZED) LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0xe1]:(LQOSTOP0|LQOPKT) SCB Count = 4 CMDS_PENDING = 1 LASTSCB 0x3 CURRSCB 0x2 NEXTSCB 0xff80 qinstart = 101 qinfifonext = 102 QINFIFO: 0x3 WAITING_TID_QUEUES: Pending list: 3 FIFO_USE[0x0] SCB_CONTROL[0x0] SCB_SCSIID[0x37] 2 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x37] Total 2 Kernel Free SCB list: 1 0 Sequencer Complete DMA-inprog list: Sequencer Complete list: Sequencer DMA-Up and Complete list: scsi3: FIFO0 Active, LONGJMP == 0x261, SCB 0x2 SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS) SEQINTSRC[0x0] DFCNTRL[0x28]:(HDMAEN|SCSIEN) DFSTATUS[0x80]:(PRELOAD_AVAIL) SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0] SOFFCNT[0x0] MDFFSTAT[0xc]:(DLZERO|SHVALID) SHADDR = 0x03d9f321e, SHCNT = 0xe2 HADDR = 0x03d9f3200, HCNT = 0x100 CCSGCTL[0x10]:(SG_CACHE_AVAIL) scsi3: FIFO1 Free, LONGJMP == 0x8061, SCB 0x3 SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS) SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL) SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0] SOFFCNT[0x0] MDFFSTAT[0x5]:(FIFOFREE|DLZERO) SHADDR = 0x00, SHCNT = 0x0 HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL) LQIN: 0x8 0x0 0x0 0x2 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x1e 0x0 0x0 0x0 0x0 scsi3: LQISTATE = 0x2a, LQOSTATE = 0x0, OPTIONMODE = 0x52 scsi3: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x1 SIMODE0[0xc]:(ENOVERRUN|ENIOERR) CCSCBCTL[0x4]:(CCSCBDIR) scsi3: REG0 == 0x3, SINDEX = 0x108, DINDEX = 0x108 scsi3: SCBPTR == 0x2, SCB_NEXT == 0xff80, SCB_NEXT2 == 0xff50 CDB 0 0 0 0 0 0 STACK: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 <<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>> DevQ(0:3:0): 0 waiting DevQ(0:8:0): 0 waiting scsi3:0:3:0: Cmd aborted from QINFIFO scsi: Device offlined - not ready after error recovery: host 3 channel 0 id 3 lun 0 scsi: Device offlined - not ready after error recovery: host 3 channel 0 id 3 lun 0 scsi3 (3:0): rejecting I/O to offline device Buffer I/O error on device sdb1, logical block 476234 SCSI error : <3 0 3 0> return code = 0x50000 end_request: I/O error, dev sdb, sector 1315936 Buffer I/O error on device sdb1, logical block 164488 scsi3 (3:0): rejecting I/O to offline device Buffer I/O error on device sdb1, logical block 164489 Buffer I/O error on device sdb1, logical block 164490 Buffer I/O error on device sdb1, logical block 164491 Buffer I/O error on device sdb1, logical block 164492 Buffer I/O error on device sdb1, logical block 164493 Buffer I/O error on device sdb1, logical block 164494 Buffer I/O error on device sdb1, logical block 164495 Buffer I/O error on device sdb1, logical block 164496 scsi3 (3:0): rejecting I/O to offline device scsi3 (3:0): rejecting I/O to offline device scsi3 (3:0): rejecting I/O to offline device Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Assignee: Ben Collins Status: Unconfirmed Description: Had a Hoary/AMD64 installation running fine on an IBM eServer xSeries 226 (model 8648-1AU with 2 Xeon Nocona CPUs, 1GB RAM and an AIC7902 SCSI HBA). Ubuntu-built EM64-SMP kernel image, as well as custom built vanilla kernels worked fine. After performing an upgrade to Breezy, the system boots up fine but when I attempt to log in as a normal user, a flurry of SCSI errors comes and the system is inpoerable. HOWEVER, if I first log in as root, and touch the /home filesystem which is mounted on the SCSI disk (e.g. by doing ls /home), everything works fine, and after that I can log in as a normal user. After a few minutes, however, the SCSI error will be back again, and the only possible action would be cutting power. The next boot, the machine may or may not be operable, resulting in the SCSI error at the stage of fscking the unclean partition, with the same output (see below). After that, I can only repair the machine by booting into SuSE which I have on another drive, and issue an fsck on /dev/hdb1. Sorry I am not sure even which package to log this against. There was no kernel change at the time of userland upgrade, and this problem is happening with different kernel versions some of which (2.6.13.4-vanilla and 2.6.8.1-vanilla) are exactly the same as what I use in SuSE and that works just fine. Full kernel output follows: Bootdata ok (command line is root=/dev/sda3 ro console=tty0 vga=0x318 ide0=ata66) Linux version 2.6.13.4 (root at parmenides) (gcc version 4.0.2 20050808 (prerelease) (Ubuntu 4.0.1-4ubuntu9)) #11 SMP Sat Dec 24 21:36:07 EST 2005 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009b400 (usable) BIOS-e820: 000000000009b400 - 00000000000a0000 (reserved) BIOS-e820: 00000000000d0000 - 00000000000dc000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003ff60000 (usable) BIOS-e820: 000000003ff60000 - 000000003ff76000 (ACPI data) BIOS-e820: 000000003ff76000 - 000000003ff80000 (ACPI NVS) BIOS-e820: 000000003ff80000 - 0000000040000000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ff800000 - 00000000ffc00000 (reserved) BIOS-e820: 00000000fffffc00 - 0000000100000000 (reserved) ACPI: RSDP (v000 PTLTD ) @ 0x00000000000f6c30 ACPI: RSDT (v001 PTLTD RSDT 0x06040000 LTP 0x00000000) @ 0x000000003ff70c64 ACPI: FADT (v001 INTEL LINDHRST 0x06040000 PTL 0x00000003) @ 0x000000003ff75d91 ACPI: MCFG (v001 PTLTD MCFG 0x06040000 LTP 0x00000000) @ 0x000000003ff75e05 ACPI: SPCR (v001 PTLTD $UCRTBL$ 0x06040000 PTL 0x00000001) @ 0x000000003ff75e45 ACPI: MADT (v001 PTLTD APIC 0x06040000 LTP 0x00000000) @ 0x000000003ff75e95 ACPI: BOOT (v001 PTLTD $SBFTBL$ 0x06040000 LTP 0x00000001) @ 0x000000003ff75f31 ACPI: ASF! (v032 MBI 0x06040000 0x00000000) @ 0x000000003ff75f59 ACPI: SSDT (v001 PmRef CpuPm 0x00003000 INTL 0x20030224) @ 0x000000003ff70ca4 ACPI: DSDT (v001 Intel LINDHRST 0x06040000 MSFT 0x0100000e) @ 0x0000000000000000 On node 0 totalpages: 261883 DMA zone: 3995 pages, LIFO batch:1 Normal zone: 257888 pages, LIFO batch:31 HighMem zone: 0 pages, LIFO batch:1 ACPI: PM-Timer IO Port: 0x1008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 15:3 APIC version 16 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x06] enabled) Processor #6 15:3 APIC version 16 ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) Processor #1 15:3 APIC version 16 ACPI: LAPIC (acpi_id[0x03] lapic_id[0x07] enabled) Processor #7 15:3 APIC version 16 ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 ACPI: IOAPIC (id[0x03] address[0xfec81000] gsi_base[24]) IOAPIC[1]: apic_id 3, version 32, address 0xfec81000, GSI 24-47 ACPI: IOAPIC (id[0x04] address[0xfec81400] gsi_base[48]) IOAPIC[2]: apic_id 4, version 32, address 0xfec81400, GSI 48-71 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Setting APIC routing to flat Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 40000000 (gap: 40000000:a0000000) Built 1 zonelists Kernel command line: root=/dev/sda3 ro console=tty0 vga=0x318 ide0=ata66 ide_setup: ide0=ata66 -- OBSOLETE OPTION, WILL BE REMOVED SOON! Initializing CPU#0 PID hash table entries: 4096 (order: 12, 131072 bytes) time.c: Using 3.579545 MHz PM timer. time.c: Detected 3000.242 MHz processor. Console: colour dummy device 80x25 Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) Memory: 1027348k/1047936k available (1969k kernel code, 19940k reserved, 1169k data, 172k init) Calibrating delay using timer specific routine.. 6009.02 BogoMIPS (lpj=12018040) Security Framework v1.0.0 initialized Mount-cache hash table entries: 256 CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 1024K using mwait in idle threads. CPU: Physical Processor ID: 0 CPU0: Thermal monitoring enabled (TM1) mtrr: v2.0 (20020519) Using local APIC timer interrupts. Detected 12.500 MHz APIC timer. Booting processor 1/4 APIC 0x6 Initializing CPU#1 Calibrating delay using timer specific routine.. 6000.67 BogoMIPS (lpj=12001342) CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 1024K CPU: Physical Processor ID: 3 CPU1: Thermal monitoring enabled (TM1) Intel(R) Xeon(TM) CPU 3.00GHz stepping 04 APIC error on CPU1: 00(40) CPU 1: Syncing TSC to CPU 0. CPU 1: synchronized TSC with CPU 0 (last diff 12 cycles, maxerr 1192 cycles) Booting processor 2/4 APIC 0x1 Initializing CPU#2 Calibrating delay using timer specific routine.. 6000.72 BogoMIPS (lpj=12001456) CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 1024K CPU: Physical Processor ID: 0 CPU2: Thermal monitoring enabled (TM1) Intel(R) Xeon(TM) CPU 3.00GHz stepping 04 APIC error on CPU2: 00(40) CPU 2: Syncing TSC to CPU 0. CPU 2: synchronized TSC with CPU 0 (last diff -146 cycles, maxerr 930 cycles) Booting processor 3/4 APIC 0x7 Initializing CPU#3 Calibrating delay using timer specific routine.. 6000.77 BogoMIPS (lpj=12001540) CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 1024K CPU: Physical Processor ID: 3 CPU3: Thermal monitoring enabled (TM1) Intel(R) Xeon(TM) CPU 3.00GHz stepping 04 APIC error on CPU3: 00(40) CPU 3: Syncing TSC to CPU 0. CPU 3: synchronized TSC with CPU 0 (last diff 15 cycles, maxerr 1192 cycles) Brought up 4 CPUs time.c: Using PIT/TSC based timekeeping. testing NMI watchdog ... OK. NET: Registered protocol family 16 ACPI: bus type pci registered PCI: Using configuration type 1 ACPI: Subsystem revision 20050408 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) ACPI: Assume root bridge [\_SB_.PCI0] segment is 0 PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 PCI: PXH quirk detected, disabling MSI for SHPC device PCI: PXH quirk detected, disabling MSI for SHPC device Boot video device is 0000:05:00.0 PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3.PXHA._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3.PXHB._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 6 7 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 14 15) ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 6 7 *10 11 14 15) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 11 devices SCSI subsystem initialized usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report PCI: Bridge: 0000:00:02.0 IO window: disabled. MEM window: c0100000-c01fffff PREFETCH window: disabled. PCI: Bridge: 0000:02:00.0 IO window: 2000-2fff MEM window: c0300000-c03fffff PREFETCH window: 40000000-400fffff PCI: Bridge: 0000:02:00.2 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:03.0 IO window: 2000-2fff MEM window: c0200000-c03fffff PREFETCH window: 40000000-400fffff PCI: Bridge: 0000:00:04.0 IO window: disabled. MEM window: c1000000-c7ffffff PREFETCH window: d0000000-d7ffffff PCI: Bridge: 0000:00:1e.0 IO window: 3000-3fff MEM window: c8000000-c80fffff PREFETCH window: d8000000-dfffffff ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:02.0 to 64 ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:03.0 to 64 PCI: Setting latency timer of device 0000:02:00.0 to 64 PCI: Setting latency timer of device 0000:02:00.2 to 64 ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:04.0 to 64 PCI: Setting latency timer of device 0000:00:1e.0 to 64 Simple Boot Flag at 0x39 set to 0x1 IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $ Initializing Cryptographic API ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:02.0 to 64 Allocate Port Service[pcie00] ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:03.0 to 64 Allocate Port Service[pcie00] ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:04.0 to 64 Allocate Port Service[pcie00] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc20000080000, using 6144k, total 131072k vesafb: mode is 1024x768x32, linelength=4096, pages=1 vesafb: scrolling: redraw vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 Console: switching to colour frame buffer device 128x48 fb0: VESA VGA frame buffer device Real Time Clock Driver v1.12 [drm] Initialized drm 1.0.0 20040925 PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH5: IDE controller at PCI slot 0000:00:1f.1 ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 17 ICH5: chipset revision 2 ICH5: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x14a0-0x14a7, BIOS settings: hda:DMA, hdb:pio Probing IDE interface ide0... hda: PIONEER DVD-RW DVR-110D, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... Probing IDE interface ide2... Probing IDE interface ide3... Probing IDE interface ide4... Probing IDE interface ide5... hda: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2000kB Cache, UDMA(66) Uniform CD-ROM driver Revision: 3.20 libata version 1.12 loaded. ata_piix version 1.04 ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 18 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1f.2 to 64 ata1: SATA max UDMA/133 cmd 0x14E0 ctl 0x14DA bmdma 0x14B0 irq 17 ata2: SATA max UDMA/133 cmd 0x14D0 ctl 0x14C6 bmdma 0x14B8 irq 17 ata1: dev 0 cfg 49:2f00 82:7c6b 83:7b09 84:4003 85:7c69 86:3a01 87:4003 88:207f ata1: dev 0 ATA, max UDMA/133, 240121728 sectors: ata1: dev 0 configured for UDMA/133 scsi0 : ata_piix ata2: SATA port has no device. scsi1 : ata_piix Vendor: ATA Model: Maxtor 6Y120M0 Rev: YAR5 Type: Direct-Access ANSI SCSI revision: 05 SCSI device sda: 240121728 512-byte hdwr sectors (122942 MB) SCSI device sda: drive cache: write back SCSI device sda: 240121728 512-byte hdwr sectors (122942 MB) SCSI device sda: drive cache: write back sda: sda1 sda2 sda3 Attached scsi disk sda at scsi0, channel 0, id 0, lun 0 Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0, type 0 usbmon: debugfs is not available NET: Registered protocol family 2 input: AT Translated Set 2 keyboard on isa0060/serio0 IP route cache hash table entries: 32768 (order: 6, 262144 bytes) TCP established hash table entries: 131072 (order: 9, 2097152 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered TCP bic registered EXT3-fs: INFO: recovery required on readonly filesystem. EXT3-fs: write access will be enabled during recovery. kjournald starting. Commit interval 5 seconds EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 172k freed NET: Registered protocol family 1 Adding 979952k swap on /dev/sda2. Priority:-1 extents:1 EXT3 FS on sda3, internal journal ACPI: PCI Interrupt 0000:03:03.0[A] -> GSI 30 (level, low) -> IRQ 18 ACPI: PCI Interrupt 0000:03:03.1[B] -> GSI 31 (level, low) -> IRQ 19 scsi2 : Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev 1.3.11 aic7902: Ultra320 Wide Channel A, SCSI Id=7, PCI-X 67-100Mhz, 512 SCBs scsi3 : Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev 1.3.11 aic7902: Ultra320 Wide Channel B, SCSI Id=7, PCI-X 67-100Mhz, 512 SCBs (scsi3:A:3): 320.000MB/s transfers (160.000MHz RDSTRM|DT|IU|RTI, 16bit) Vendor: IBM-ESXS Model: ST336607LC FN Rev: B25H Type: Direct-Access ANSI SCSI revision: 03 scsi3:A:3:0: Tagged Queuing enabled. Depth 32 SCSI device sdb: 71096640 512-byte hdwr sectors (36401 MB) SCSI device sdb: drive cache: write through SCSI device sdb: 71096640 512-byte hdwr sectors (36401 MB) SCSI device sdb: drive cache: write through sdb: sdb1 Attached scsi disk sdb at scsi3, channel 0, id 3, lun 0 Attached scsi generic sg1 at scsi3, channel 0, id 3, lun 0, type 0 Vendor: IBM Model: 02R0980a S320 1 Rev: 1 Type: Processor ANSI SCSI revision: 02 Attached scsi generic sg2 at scsi3, channel 0, id 8, lun 0, type 3 mice: PS/2 mouse device common for all mice nvidia: module license 'NVIDIA' taints kernel. ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:05:00.0 to 64 NVRM: loading NVIDIA Linux x86_64 NVIDIA Kernel Module 1.0-7676 Fri Jul 29 13:15:16 PDT 2005 cdrom: open failed. SCSI error : <3 0 3 0> return code = 0x10 end_request: I/O error, dev sdb, sector 1315928 Buffer I/O error on device sdb1, logical block 164487 scsi3:0:3:0: Attempting to abort cmd ffff81003eaa5a80: 0x28 0x0 0x0 0x3a 0x22 0x70 0x0 0x0 0x8 0x0 scsi3: At time of recovery, card was not paused >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<< scsi3: Dumping Card State at program address 0x21 Mode 0x33 Card was paused HS_MAILBOX[0x0] INTCTL[0x80]:(SWTMINTMASK) SEQINTSTAT[0x0] SAVED_MODE[0x11] DFFSTAT[0x33]:(CURRFIFO_NONE|FIFO0FREE|FIFO1FREE) SCSISIGI[0x86]:(P_COMMAND|REQI|BSYI) SCSIPHASE[0x0] SCSIBUS[0x0] LASTPHASE[0x1]:(P_DATAOUT|P_BUSFREE) SCSISEQ0[0x0] SCSISEQ1[0x12]:(ENAUTOATNP|ENRSELI) SEQCTL0[0x0] SEQINTCTL[0x0] SEQ_FLAGS[0xc0]:(NO_CDB_SENT|NOT_IDENTIFIED) SEQ_FLAGS2[0x0] SSTAT0[0x0] SSTAT1[0x8]:(BUSFREE) SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0x0] SIMODE1[0xa4]:(ENSCSIPERR|ENSCSIRST|ENSELTIMO) LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0] LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0xe1]:(LQOSTOP0|LQOPKT) SCB Count = 4 CMDS_PENDING = 2 LASTSCB 0x3 CURRSCB 0x3 NEXTSCB 0xff80 qinstart = 96 qinfifonext = 96 QINFIFO: WAITING_TID_QUEUES: 3 ( 0x3 ) Pending list: 3 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x37] 2 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x37] Total 2 Kernel Free SCB list: 1 0 Sequencer Complete DMA-inprog list: Sequencer Complete list: Sequencer DMA-Up and Complete list: scsi3: FIFO0 Free, LONGJMP == 0x8251, SCB 0x3 SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS) SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL) SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0] SOFFCNT[0x0] MDFFSTAT[0x5]:(FIFOFREE|DLZERO) SHADDR = 0x00, SHCNT = 0x0 HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL) scsi3: FIFO1 Free, LONGJMP == 0x8261, SCB 0x3 SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS) SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL) SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0] SOFFCNT[0x0] MDFFSTAT[0x5]:(FIFOFREE|DLZERO) SHADDR = 0x00, SHCNT = 0x0 HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL) LQIN: 0x8 0x0 0x0 0x3 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0xc 0x0 0x0 0x0 0x0 scsi3: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52 scsi3: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x2 SIMODE0[0xc]:(ENOVERRUN|ENIOERR) CCSCBCTL[0x4]:(CCSCBDIR) scsi3: REG0 == 0x3, SINDEX = 0x108, DINDEX = 0x108 scsi3: SCBPTR == 0x3, SCB_NEXT == 0xffc0, SCB_NEXT2 == 0xff50 CDB 28 0 0 14 14 60 STACK: 0x13 0x0 0x0 0x0 0x0 0x0 0x0 0x0 <<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>> DevQ(0:3:0): 0 waiting DevQ(0:8:0): 0 waiting scsi3:0:3:0: Cmd aborted from QINFIFO scsi3:0:3:0: Attempting to abort cmd ffff81003eaa5a80: 0x0 0x0 0x0 0x0 0x0 0x0 scsi3: At time of recovery, card was not paused >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<< scsi3: Dumping Card State at program address 0x12 Mode 0x33 Card was paused HS_MAILBOX[0x0] INTCTL[0x80]:(SWTMINTMASK) SEQINTSTAT[0x0] SAVED_MODE[0x11] DFFSTAT[0x33]:(CURRFIFO_NONE|FIFO0FREE|FIFO1FREE) SCSISIGI[0x86]:(P_COMMAND|REQI|BSYI) SCSIPHASE[0x0] SCSIBUS[0x0] LASTPHASE[0x1]:(P_DATAOUT|P_BUSFREE) SCSISEQ0[0x0] SCSISEQ1[0x12]:(ENAUTOATNP|ENRSELI) SEQCTL0[0x0] SEQINTCTL[0x0] SEQ_FLAGS[0xc0]:(NO_CDB_SENT|NOT_IDENTIFIED) SEQ_FLAGS2[0x0] SSTAT0[0x0] SSTAT1[0x8]:(BUSFREE) SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0x0] SIMODE1[0xa4]:(ENSCSIPERR|ENSCSIRST|ENSELTIMO) LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0] LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0xe1]:(LQOSTOP0|LQOPKT) SCB Count = 4 CMDS_PENDING = 2 LASTSCB 0x3 CURRSCB 0x3 NEXTSCB 0xff80 qinstart = 97 qinfifonext = 97 QINFIFO: WAITING_TID_QUEUES: 3 ( 0x3 ) Pending list: 3 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x37] 2 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x37] Total 2 Kernel Free SCB list: 1 0 Sequencer Complete DMA-inprog list: Sequencer Complete list: Sequencer DMA-Up and Complete list: scsi3: FIFO0 Free, LONGJMP == 0x8251, SCB 0x3 SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS) SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL) SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0] SOFFCNT[0x0] MDFFSTAT[0x5]:(FIFOFREE|DLZERO) SHADDR = 0x00, SHCNT = 0x0 HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL) scsi3: FIFO1 Free, LONGJMP == 0x8261, SCB 0x3 SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS) SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL) SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0] SOFFCNT[0x0] MDFFSTAT[0x5]:(FIFOFREE|DLZERO) SHADDR = 0x00, SHCNT = 0x0 HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL) LQIN: 0x8 0x0 0x0 0x3 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0xc 0x0 0x0 0x0 0x0 scsi3: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52 scsi3: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x2 SIMODE0[0xc]:(ENOVERRUN|ENIOERR) CCSCBCTL[0x4]:(CCSCBDIR) scsi3: REG0 == 0x3, SINDEX = 0x108, DINDEX = 0x108 scsi3: SCBPTR == 0x3, SCB_NEXT == 0xff80, SCB_NEXT2 == 0xff50 CDB 0 0 0 0 0 0 STACK: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 <<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>> DevQ(0:3:0): 0 waiting DevQ(0:8:0): 0 waiting scsi3:0:3:0: Cmd aborted from QINFIFO scsi3:0:3:0: Attempting to abort cmd ffff81003eaa5880: 0x28 0x0 0x0 0x14 0x14 0x60 0x0 0x0 0x78 0x0 scsi3:0:3:0: Command not found scsi3:0:3:0: Attempting to abort cmd ffff81003eaa5880: 0x0 0x0 0x0 0x0 0x0 0x0 scsi3: At time of recovery, card was not paused >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<< scsi3: Dumping Card State at program address 0x26 Mode 0x22 Card was paused HS_MAILBOX[0x0] INTCTL[0x80]:(SWTMINTMASK) SEQINTSTAT[0x0] SAVED_MODE[0x11] DFFSTAT[0x33]:(CURRFIFO_NONE|FIFO0FREE|FIFO1FREE) SCSISIGI[0x86]:(P_COMMAND|REQI|BSYI) SCSIPHASE[0x0] SCSIBUS[0x0] LASTPHASE[0x1]:(P_DATAOUT|P_BUSFREE) SCSISEQ0[0x0] SCSISEQ1[0x12]:(ENAUTOATNP|ENRSELI) SEQCTL0[0x0] SEQINTCTL[0x0] SEQ_FLAGS[0xc0]:(NO_CDB_SENT|NOT_IDENTIFIED) SEQ_FLAGS2[0x0] SSTAT0[0x0] SSTAT1[0x0] SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0x0] SIMODE1[0xa4]:(ENSCSIPERR|ENSCSIRST|ENSELTIMO) LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0] LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0xe1]:(LQOSTOP0|LQOPKT) SCB Count = 4 CMDS_PENDING = 2 LASTSCB 0x3 CURRSCB 0x3 NEXTSCB 0xff80 qinstart = 98 qinfifonext = 98 QINFIFO: WAITING_TID_QUEUES: 3 ( 0x3 ) Pending list: 3 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x37] 2 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x37] Total 2 Kernel Free SCB list: 1 0 Sequencer Complete DMA-inprog list: Sequencer Complete list: Sequencer DMA-Up and Complete list: scsi3: FIFO0 Free, LONGJMP == 0x8251, SCB 0x3 SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS) SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL) SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0] SOFFCNT[0x0] MDFFSTAT[0x5]:(FIFOFREE|DLZERO) SHADDR = 0x00, SHCNT = 0x0 HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL) scsi3: FIFO1 Free, LONGJMP == 0x8261, SCB 0x3 SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS) SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL) SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0] SOFFCNT[0x0] MDFFSTAT[0x5]:(FIFOFREE|DLZERO) SHADDR = 0x00, SHCNT = 0x0 HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL) LQIN: 0x8 0x0 0x0 0x3 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0xc 0x0 0x0 0x0 0x0 scsi3: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52 scsi3: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x2 SIMODE0[0xc]:(ENOVERRUN|ENIOERR) CCSCBCTL[0x4]:(CCSCBDIR) scsi3: REG0 == 0x3, SINDEX = 0x108, DINDEX = 0x108 scsi3: SCBPTR == 0xff00, SCB_NEXT == 0xff00, SCB_NEXT2 == 0x0 CDB 0 1 0 0 0 0 STACK: 0x14 0x0 0x0 0x0 0x0 0x0 0x0 0x0 <<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>> DevQ(0:3:0): 0 waiting DevQ(0:8:0): 0 waiting scsi3:0:3:0: Cmd aborted from QINFIFO Recovery code sleeping Recovery code awake Timer Expired scsi3: Device reset returning 0x2003 Recovery SCB completes scsi3:0:3:0: Attempting to abort cmd ffff81003eaa5a80: 0x0 0x0 0x0 0x0 0x0 0x0 scsi3: At time of recovery, card was not paused >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<< scsi3: Dumping Card State at program address 0x26 Mode 0x33 Card was paused HS_MAILBOX[0x0] INTCTL[0x80]:(SWTMINTMASK) SEQINTSTAT[0x0] SAVED_MODE[0x11] DFFSTAT[0x24]:(CURRFIFO_0|FIFO1FREE) SCSISIGI[0x64]:(P_DATAIN_DT|BSYI) SCSIPHASE[0x0] SCSIBUS[0x3a] LASTPHASE[0x1]:(P_DATAOUT|P_BUSFREE) SCSISEQ0[0x0] SCSISEQ1[0x12]:(ENAUTOATNP|ENRSELI) SEQCTL0[0x0] SEQINTCTL[0x0] SEQ_FLAGS[0x0] SEQ_FLAGS2[0x4]:(SELECTOUT_QFROZEN) SSTAT0[0x0] SSTAT1[0x8]:(BUSFREE) SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0x0] SIMODE1[0xa4]:(ENSCSIPERR|ENSCSIRST|ENSELTIMO) LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x80]:(PACKETIZED) LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0xe1]:(LQOSTOP0|LQOPKT) SCB Count = 4 CMDS_PENDING = 1 LASTSCB 0x3 CURRSCB 0x2 NEXTSCB 0xff80 qinstart = 101 qinfifonext = 101 QINFIFO: WAITING_TID_QUEUES: Pending list: 2 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x37] Total 1 Kernel Free SCB list: 3 1 0 Sequencer Complete DMA-inprog list: Sequencer Complete list: Sequencer DMA-Up and Complete list: scsi3: FIFO0 Active, LONGJMP == 0x261, SCB 0x2 SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS) SEQINTSRC[0x0] DFCNTRL[0x28]:(HDMAEN|SCSIEN) DFSTATUS[0x80]:(PRELOAD_AVAIL) SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0] SOFFCNT[0x0] MDFFSTAT[0xc]:(DLZERO|SHVALID) SHADDR = 0x03d9f321e, SHCNT = 0xe2 HADDR = 0x03d9f3200, HCNT = 0x100 CCSGCTL[0x10]:(SG_CACHE_AVAIL) scsi3: FIFO1 Free, LONGJMP == 0x8061, SCB 0x3 SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS) SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL) SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0] SOFFCNT[0x0] MDFFSTAT[0x5]:(FIFOFREE|DLZERO) SHADDR = 0x00, SHCNT = 0x0 HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL) LQIN: 0x8 0x0 0x0 0x2 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x1e 0x0 0x0 0x0 0x0 scsi3: LQISTATE = 0x2a, LQOSTATE = 0x0, OPTIONMODE = 0x52 scsi3: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x1 SIMODE0[0xc]:(ENOVERRUN|ENIOERR) CCSCBCTL[0x4]:(CCSCBDIR) scsi3: REG0 == 0x3, SINDEX = 0x108, DINDEX = 0x108 scsi3: SCBPTR == 0x2, SCB_NEXT == 0xff80, SCB_NEXT2 == 0xff50 CDB 0 0 0 0 0 0 STACK: 0x12 0x0 0x0 0x0 0x0 0x0 0x0 0x0 <<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>> DevQ(0:3:0): 0 waiting DevQ(0:8:0): 0 waiting scsi3:0:3:0: Unable to deliver message scsi3:0:3:0: Attempting to abort cmd ffff81003eaa5880: 0x0 0x0 0x0 0x0 0x0 0x0 scsi3: At time of recovery, card was not paused >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<< scsi3: Dumping Card State at program address 0x12 Mode 0x33 Card was paused HS_MAILBOX[0x0] INTCTL[0x80]:(SWTMINTMASK) SEQINTSTAT[0x0] SAVED_MODE[0x11] DFFSTAT[0x24]:(CURRFIFO_0|FIFO1FREE) SCSISIGI[0x64]:(P_DATAIN_DT|BSYI) SCSIPHASE[0x0] SCSIBUS[0x3a] LASTPHASE[0x1]:(P_DATAOUT|P_BUSFREE) SCSISEQ0[0x0] SCSISEQ1[0x12]:(ENAUTOATNP|ENRSELI) SEQCTL0[0x0] SEQINTCTL[0x0] SEQ_FLAGS[0x0] SEQ_FLAGS2[0x4]:(SELECTOUT_QFROZEN) SSTAT0[0x0] SSTAT1[0x8]:(BUSFREE) SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0x0] SIMODE1[0xa4]:(ENSCSIPERR|ENSCSIRST|ENSELTIMO) LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x80]:(PACKETIZED) LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0xe1]:(LQOSTOP0|LQOPKT) SCB Count = 4 CMDS_PENDING = 1 LASTSCB 0x3 CURRSCB 0x2 NEXTSCB 0xff80 qinstart = 101 qinfifonext = 102 QINFIFO: 0x3 WAITING_TID_QUEUES: Pending list: 3 FIFO_USE[0x0] SCB_CONTROL[0x0] SCB_SCSIID[0x37] 2 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x37] Total 2 Kernel Free SCB list: 1 0 Sequencer Complete DMA-inprog list: Sequencer Complete list: Sequencer DMA-Up and Complete list: scsi3: FIFO0 Active, LONGJMP == 0x261, SCB 0x2 SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS) SEQINTSRC[0x0] DFCNTRL[0x28]:(HDMAEN|SCSIEN) DFSTATUS[0x80]:(PRELOAD_AVAIL) SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0] SOFFCNT[0x0] MDFFSTAT[0xc]:(DLZERO|SHVALID) SHADDR = 0x03d9f321e, SHCNT = 0xe2 HADDR = 0x03d9f3200, HCNT = 0x100 CCSGCTL[0x10]:(SG_CACHE_AVAIL) scsi3: FIFO1 Free, LONGJMP == 0x8061, SCB 0x3 SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS) SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL) SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0] SOFFCNT[0x0] MDFFSTAT[0x5]:(FIFOFREE|DLZERO) SHADDR = 0x00, SHCNT = 0x0 HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL) LQIN: 0x8 0x0 0x0 0x2 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x1e 0x0 0x0 0x0 0x0 scsi3: LQISTATE = 0x2a, LQOSTATE = 0x0, OPTIONMODE = 0x52 scsi3: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x1 SIMODE0[0xc]:(ENOVERRUN|ENIOERR) CCSCBCTL[0x4]:(CCSCBDIR) scsi3: REG0 == 0x3, SINDEX = 0x108, DINDEX = 0x108 scsi3: SCBPTR == 0x2, SCB_NEXT == 0xff80, SCB_NEXT2 == 0xff50 CDB 0 0 0 0 0 0 STACK: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 <<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>> DevQ(0:3:0): 0 waiting DevQ(0:8:0): 0 waiting scsi3:0:3:0: Cmd aborted from QINFIFO scsi: Device offlined - not ready after error recovery: host 3 channel 0 id 3 lun 0 scsi: Device offlined - not ready after error recovery: host 3 channel 0 id 3 lun 0 scsi3 (3:0): rejecting I/O to offline device Buffer I/O error on device sdb1, logical block 476234 SCSI error : <3 0 3 0> return code = 0x50000 end_request: I/O error, dev sdb, sector 1315936 Buffer I/O error on device sdb1, logical block 164488 scsi3 (3:0): rejecting I/O to offline device Buffer I/O error on device sdb1, logical block 164489 Buffer I/O error on device sdb1, logical block 164490 Buffer I/O error on device sdb1, logical block 164491 Buffer I/O error on device sdb1, logical block 164492 Buffer I/O error on device sdb1, logical block 164493 Buffer I/O error on device sdb1, logical block 164494 Buffer I/O error on device sdb1, logical block 164495 Buffer I/O error on device sdb1, logical block 164496 scsi3 (3:0): rejecting I/O to offline device scsi3 (3:0): rejecting I/O to offline device scsi3 (3:0): rejecting I/O to offline device -- Kernel crash accessing a SCSI disk as regular user, after upgrading userland from Hoary to Breezy https://launchpad.net/malone/bugs/32081 From mdz at ubuntu.com Wed Apr 5 02:47:23 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Wed, 05 Apr 2006 02:47:23 -0000 Subject: [Bug 31983] Re: Kernel security update renders system unbootable References: <20060219133514.1427.22950.malonedeb@gangotri.ubuntu.com> Message-ID: <20060405024723.25515.67170.launchpad@gangotri.ubuntu.com> ** Changed in: initramfs-tools (Ubuntu) Assignee: (unassigned) => Adam Conrad -- Kernel security update renders system unbootable https://launchpad.net/malone/bugs/31983 From ppadman at india.hp.com Wed Apr 5 02:55:59 2006 From: ppadman at india.hp.com (Pappan) Date: Wed, 05 Apr 2006 02:55:59 -0000 Subject: [Bug 33265] reboot does not do a reboot in sony laptop References: <20060301141057.22115.68933.malonedeb@gandwana.ubuntu.com> Message-ID: <20060405025559.25515.47709.launchpad@canonical@gangotri.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Assignee: Ben Collins Status: Unconfirmed Description: i am using sony vaio laptop and running Ubuntu 5.10 Breezy Badger. But when i do a reboot ubuntu it turns off the monitor but never turns off the power and never reboots. Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Assignee: Ben Collins Status: Unconfirmed Description: i am using sony vaio laptop and running Ubuntu 5.10 Breezy Badger. But when i do a reboot ubuntu it turns off the monitor but never turns off the power and never reboots. -- reboot does not do a reboot in sony laptop https://launchpad.net/malone/bugs/33265 From mdz at ubuntu.com Wed Apr 5 02:51:27 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Wed, 05 Apr 2006 02:51:27 -0000 Subject: [Bug 32175] Re: Laptop segfaults when shut down References: <20060220195431.795.64162.malonedeb@gandwana.ubuntu.com> Message-ID: <20060405025128.14649.70906.malone@gandwana.ubuntu.com> What do you mean by "the computer segfaults"? Do you get a kernel panic? Does the halt(8) program itself segfault? ** Changed in: acpi (Ubuntu) Sourcepackagename: acpi => linux-source-2.6.15 Binarypackagename: acpi => None Status: Unconfirmed => Needs Info -- Laptop segfaults when shut down https://launchpad.net/malone/bugs/32175 From mdz at ubuntu.com Wed Apr 5 02:53:54 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Wed, 05 Apr 2006 02:53:54 -0000 Subject: [Bug 32072] Re: bugs in k8 SMP kernel References: <20060220040755.1387.38329.malonedeb@gangotri.ubuntu.com> Message-ID: <20060405025354.14649.94346.launchpad@gandwana.ubuntu.com> ** Changed in: linux-meta linux-amd64-k8-smp (Ubuntu) Sourcepackagename: linux-meta => linux-source-2.6.15 Binarypackagename: linux-amd64-k8-smp => None Assignee: (unassigned) => Ben Collins -- bugs in k8 SMP kernel https://launchpad.net/malone/bugs/32072 From mdz at ubuntu.com Wed Apr 5 02:54:08 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Wed, 05 Apr 2006 02:54:08 -0000 Subject: [Bug 32070] Re: AMD 280 Kernel OOPS on Bootup (dapper Flight4 Live CD) References: <20060220035658.1427.32076.malonedeb@gangotri.ubuntu.com> Message-ID: <20060405025408.14572.94219.launchpad@gandwana.ubuntu.com> ** Changed in: linux-source-2.6.15 (Ubuntu) Assignee: (unassigned) => Ben Collins -- AMD 280 Kernel OOPS on Bootup (dapper Flight4 Live CD) https://launchpad.net/malone/bugs/32070 From mdz at ubuntu.com Wed Apr 5 02:54:21 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Wed, 05 Apr 2006 02:54:21 -0000 Subject: [Bug 32055] Re: Dapper flight 4 randomly crashes/freezes References: <20060220003757.1427.80656.malonedeb@gangotri.ubuntu.com> Message-ID: <20060405025421.14649.13790.launchpad@gandwana.ubuntu.com> ** Changed in: linux-source-2.6.15 kernel-image-2.6.15-15-386-di (Ubuntu) Assignee: (unassigned) => Ben Collins -- Dapper flight 4 randomly crashes/freezes https://launchpad.net/malone/bugs/32055 From mdz at ubuntu.com Wed Apr 5 02:53:10 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Wed, 05 Apr 2006 02:53:10 -0000 Subject: [Bug 32081] Re: Kernel crash accessing a SCSI disk as regular user, after upgrading userland from Hoary to Breezy References: <20060220050635.833.12258.malonedeb@gandwana.ubuntu.com> Message-ID: <20060405025310.25542.60509.launchpad@gangotri.ubuntu.com> ** Changed in: e2fsprogs e2fslibs (Ubuntu) Sourcepackagename: e2fsprogs => linux-source-2.6.15 Binarypackagename: e2fslibs => None Assignee: (unassigned) => Ben Collins -- Kernel crash accessing a SCSI disk as regular user, after upgrading userland from Hoary to Breezy https://launchpad.net/malone/bugs/32081 From mdz at ubuntu.com Wed Apr 5 02:55:58 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Wed, 05 Apr 2006 02:55:58 -0000 Subject: [Bug 33265] Re: reboot does not do a reboot in sony laptop References: <20060301141057.22115.68933.malonedeb@gandwana.ubuntu.com> Message-ID: <20060405025558.25515.95809.launchpad@gangotri.ubuntu.com> ** Changed in: debian-installer-utils di-utils-reboot (Ubuntu) Sourcepackagename: debian-installer-utils => linux-source-2.6.15 Binarypackagename: di-utils-reboot => None Assignee: (unassigned) => Ben Collins -- reboot does not do a reboot in sony laptop https://launchpad.net/malone/bugs/33265 From burlap at poczta.onet.pl Wed Apr 5 03:40:49 2006 From: burlap at poczta.onet.pl (=?utf-8?b?UmFmYcWCIFByw7NjaG5pYWs=?=) Date: Wed, 05 Apr 2006 03:40:49 -0000 Subject: [Bug 30766] default firmware not working for acx d-link dwl-g650+ References: <20060207221213.32736.87495.malonedeb@gandwana.ubuntu.com> Message-ID: <20060405034049.25542.49030.launchpad@canonical@gangotri.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Assignee: Ben Collins Status: Unconfirmed Description: As in the summary, acx111-based d-link dwl-g650+ does not work with the default firmware. It works with 1.2.1.34 (tiacx111c16) - this is the firmware recommended (as the better of the only two working) on acx100 development website - see http://acx100.sourceforge.net/wiki/Firmware Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Assignee: Ben Collins Status: Unconfirmed Description: As in the summary, acx111-based d-link dwl-g650+ does not work with the default firmware. It works with 1.2.1.34 (tiacx111c16) - this is the firmware recommended (as the better of the only two working) on acx100 development website - see http://acx100.sourceforge.net/wiki/Firmware -- default firmware not working for acx d-link dwl-g650+ https://launchpad.net/malone/bugs/30766 From hile at iki.fi Wed Apr 5 03:48:51 2006 From: hile at iki.fi (Ilkka Tuohela) Date: Wed, 05 Apr 2006 03:48:51 -0000 Subject: [Bug 32602] Wrong firmware selected for a acx111 card References: <20060223131001.14968.23308.malonedeb@gangotri.ubuntu.com> Message-ID: <20060405034851.14572.59804.launchpad@canonical@gandwana.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Assignee: Ben Collins Status: Unconfirmed Description: I tested a zyxel G-162 wireless card, and noticed it uses incorrect firmware. Correct line to load this card is to use firmware_ver=1.2.0.30 at least for this revision I tested... Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Assignee: Ben Collins Status: Unconfirmed Description: I tested a zyxel G-162 wireless card, and noticed it uses incorrect firmware. Correct line to load this card is to use firmware_ver=1.2.0.30 at least for this revision I tested... -- Wrong firmware selected for a acx111 card https://launchpad.net/malone/bugs/32602 From adconrad at 0c3.net Wed Apr 5 03:40:48 2006 From: adconrad at 0c3.net (Adam Conrad) Date: Wed, 05 Apr 2006 03:40:48 -0000 Subject: [Bug 30766] Re: default firmware not working for acx d-link dwl-g650+ References: <20060207221213.32736.87495.malonedeb@gandwana.ubuntu.com> Message-ID: <20060405034048.25542.5868.malone@gangotri.ubuntu.com> The firmware selection based on PCI ID is handled by linux-source, LRM just ships the firmware. ** Changed in: linux-restricted-modules-2.6.15 linux-restricted-modules-2.6.15-14-386 (Ubuntu) Sourcepackagename: linux-restricted-modules-2.6.15 => linux-source-2.6.15 Binarypackagename: linux-restricted-modules-2.6.15-14-386 => None Assignee: (unassigned) => Ben Collins -- default firmware not working for acx d-link dwl-g650+ https://launchpad.net/malone/bugs/30766 From adconrad at 0c3.net Wed Apr 5 03:48:51 2006 From: adconrad at 0c3.net (Adam Conrad) Date: Wed, 05 Apr 2006 03:48:51 -0000 Subject: [Bug 32602] Re: Wrong firmware selected for a acx111 card References: <20060223131001.14968.23308.malonedeb@gangotri.ubuntu.com> Message-ID: <20060405034851.14572.77110.malone@gandwana.ubuntu.com> acx firmware selection is handled by the kernel, LRM just ships the binaries. ** Changed in: linux-restricted-modules-2.6.15 linux-restricted-modules-2.6.15-16-686 (Ubuntu) Sourcepackagename: linux-restricted-modules-2.6.15 => linux-source-2.6.15 Binarypackagename: linux-restricted-modules-2.6.15-16-686 => None Assignee: (unassigned) => Ben Collins -- Wrong firmware selected for a acx111 card https://launchpad.net/malone/bugs/32602 From mdz at ubuntu.com Wed Apr 5 03:51:46 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Wed, 05 Apr 2006 03:51:46 -0000 Subject: [Bug 18489] Re: mice detected as imps2 not as ps2++ References: <20060113135641.21012.86896.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060405035146.25515.56910.launchpad@gangotri.ubuntu.com> ** Changed in: Ubuntu Sourcepackagename: None => linux-source-2.6.15 -- mice detected as imps2 not as ps2++ https://launchpad.net/malone/bugs/18489 From magelance at yahoo.com Wed Apr 5 04:02:59 2006 From: magelance at yahoo.com (PuMpErNiCkEl) Date: Wed, 05 Apr 2006 04:02:59 -0000 Subject: [Bug 35808] sound failure, modprobe error in Dapper References: <20060321025303.8118.32594.malonedeb@gandwana.ubuntu.com> Message-ID: <20060405040259.25542.93403.launchpad@canonical@gangotri.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: douglt at Dudester:~$ sudo modprobe snd-intel8x0 Password: FATAL: Error inserting snd (/lib/modules/2.6.15-19-686/kernel/sound/core/snd.ko): Unknown symbol in module, or unknown parameter (see dmesg) WARNING: Error running install command for snd WARNING: Error inserting snd_timer (/lib/modules/2.6.15-19-686/kernel/sound/core/snd-timer.ko): Unknown symbol in module, or unknown parameter (see dmesg) FATAL: Error inserting snd (/lib/modules/2.6.15-19-686/kernel/sound/core/snd.ko): Unknown symbol in module, or unknown parameter (see dmesg) WARNING: Error running install command for snd WARNING: Error inserting snd_timer (/lib/modules/2.6.15-19-686/kernel/sound/core/snd-timer.ko): Unknown symbol in module, or unknown parameter (see dmesg) FATAL: Error inserting snd_pcm (/lib/modules/2.6.15-19-686/kernel/sound/core/snd-pcm.ko): Unknown symbol in module, or unknown parameter (see dmesg) WARNING: Error running install command for snd_pcm WARNING: Error inserting snd_ac97_codec (/lib/modules/2.6.15-19-686/kernel/sound/pci/ac97/snd-ac97-codec.ko): Unknown symbol in module, or unknown parameter (see dmesg) FATAL: Error inserting snd_intel8x0 (/lib/modules/2.6.15-19-686/kernel/sound/pci/snd-intel8x0.ko): Unknown symbol in module, or unknown parameter (see dmesg) douglt at Dudester:~$ dmesg | tail [4295140.144000] snd_intel8x0: Unknown symbol snd_card_set_pm_callback [4295140.145000] snd_intel8x0: Unknown symbol snd_pcm_hw_constraint_list [4295140.145000] snd_intel8x0: Unknown symbol snd_device_new [4295140.145000] snd_intel8x0: Unknown symbol snd_ac97_get_short_name [4295140.145000] snd_intel8x0: Unknown symbol snd_pcm_suspend_all [4295140.145000] snd_intel8x0: Unknown symbol snd_ac97_pcm_assign [4295140.145000] snd_intel8x0: Unknown symbol snd_pcm_hw_constraint_integer [4295140.146000] snd_intel8x0: Unknown symbol snd_pcm_hw_constraint_msbits [4295140.146000] snd_intel8x0: Unknown symbol snd_pcm_period_elapsed [4295140.146000] snd_intel8x0: Unknown symbol snd_ac97_tune_hardware Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: douglt at Dudester:~$ sudo modprobe snd-intel8x0 Password: FATAL: Error inserting snd (/lib/modules/2.6.15-19-686/kernel/sound/core/snd.ko): Unknown symbol in module, or unknown parameter (see dmesg) WARNING: Error running install command for snd WARNING: Error inserting snd_timer (/lib/modules/2.6.15-19-686/kernel/sound/core/snd-timer.ko): Unknown symbol in module, or unknown parameter (see dmesg) FATAL: Error inserting snd (/lib/modules/2.6.15-19-686/kernel/sound/core/snd.ko): Unknown symbol in module, or unknown parameter (see dmesg) WARNING: Error running install command for snd WARNING: Error inserting snd_timer (/lib/modules/2.6.15-19-686/kernel/sound/core/snd-timer.ko): Unknown symbol in module, or unknown parameter (see dmesg) FATAL: Error inserting snd_pcm (/lib/modules/2.6.15-19-686/kernel/sound/core/snd-pcm.ko): Unknown symbol in module, or unknown parameter (see dmesg) WARNING: Error running install command for snd_pcm WARNING: Error inserting snd_ac97_codec (/lib/modules/2.6.15-19-686/kernel/sound/pci/ac97/snd-ac97-codec.ko): Unknown symbol in module, or unknown parameter (see dmesg) FATAL: Error inserting snd_intel8x0 (/lib/modules/2.6.15-19-686/kernel/sound/pci/snd-intel8x0.ko): Unknown symbol in module, or unknown parameter (see dmesg) douglt at Dudester:~$ dmesg | tail [4295140.144000] snd_intel8x0: Unknown symbol snd_card_set_pm_callback [4295140.145000] snd_intel8x0: Unknown symbol snd_pcm_hw_constraint_list [4295140.145000] snd_intel8x0: Unknown symbol snd_device_new [4295140.145000] snd_intel8x0: Unknown symbol snd_ac97_get_short_name [4295140.145000] snd_intel8x0: Unknown symbol snd_pcm_suspend_all [4295140.145000] snd_intel8x0: Unknown symbol snd_ac97_pcm_assign [4295140.145000] snd_intel8x0: Unknown symbol snd_pcm_hw_constraint_integer [4295140.146000] snd_intel8x0: Unknown symbol snd_pcm_hw_constraint_msbits [4295140.146000] snd_intel8x0: Unknown symbol snd_pcm_period_elapsed [4295140.146000] snd_intel8x0: Unknown symbol snd_ac97_tune_hardware -- sound failure, modprobe error in Dapper https://launchpad.net/malone/bugs/35808 From dn at offspringnet.net Wed Apr 5 03:55:48 2006 From: dn at offspringnet.net (grendel970) Date: Wed, 05 Apr 2006 03:55:48 -0000 Subject: [Bug 37881] Re: Parallel port printer not working References: <20060403150937.23108.72392.malonedeb@gandwana.ubuntu.com> Message-ID: <20060405035548.25515.96782.malone@gangotri.ubuntu.com> this seems related to bug #33161. -- Parallel port printer not working https://launchpad.net/malone/bugs/37881 From dn at offspringnet.net Wed Apr 5 03:57:19 2006 From: dn at offspringnet.net (grendel970) Date: Wed, 05 Apr 2006 03:57:19 -0000 Subject: [Bug 33161] Re: PnPACPI errors on boot and no /dev/fd0 References: <20060228154107.17498.36793.malonedeb@gangotri.ubuntu.com> Message-ID: <20060405035719.14649.3355.malone@gandwana.ubuntu.com> I am getting these errors in 2.6.15-19, fd0 is missing, and this will not allow my parallel port to work ala: PnPACPI: METHOD_NAME__CRS failure for PNP0400 which I have filed in bug #37881. I have a total of 13 of these PNPid's on boot. -- PnPACPI errors on boot and no /dev/fd0 https://launchpad.net/malone/bugs/33161 From adconrad at 0c3.net Wed Apr 5 04:02:58 2006 From: adconrad at 0c3.net (Adam Conrad) Date: Wed, 05 Apr 2006 04:02:58 -0000 Subject: [Bug 35808] Re: sound failure, modprobe error in Dapper References: <20060321025303.8118.32594.malonedeb@gandwana.ubuntu.com> Message-ID: <20060405040258.25542.38297.launchpad@gangotri.ubuntu.com> ** Changed in: linux-restricted-modules-2.6.15 linux-restricted-modules-2.6.15-19-686 (Ubuntu) Sourcepackagename: linux-restricted-modules-2.6.15 => linux-source-2.6.15 Binarypackagename: linux-restricted-modules-2.6.15-19-686 => None -- sound failure, modprobe error in Dapper https://launchpad.net/malone/bugs/35808 From crimsun at fungus.sh.nu Wed Apr 5 04:09:39 2006 From: crimsun at fungus.sh.nu (Daniel T. Chen) Date: Wed, 05 Apr 2006 04:09:39 -0000 Subject: [Bug 37975] Re: no sound in my laptop References: <20060404060657.23082.46696.malonedeb@gandwana.ubuntu.com> Message-ID: <20060405040939.14649.13478.malone@gandwana.ubuntu.com> Please attach output from ``tail -2 /proc/asound/oss/sndstat''. ** Changed in: linux-source-2.6.15 (Ubuntu) Binarypackagename: linux-source-2.6.15 => None Assignee: (unassigned) => Ben Collins -- no sound in my laptop https://launchpad.net/malone/bugs/37975 From woldacc at gmail.com Wed Apr 5 04:22:14 2006 From: woldacc at gmail.com (Fabio Silva) Date: Wed, 05 Apr 2006 04:22:14 -0000 Subject: [Bug 36322] module 'mrv8k' doesn't load References: <20060323231357.18295.12928.malonedeb@gandwana.ubuntu.com> Message-ID: <20060405042214.14649.1834.launchpad@canonical@gandwana.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: I'm an owner of an Asus WL-138G (Marvell W8300) wifi card. I hadn't problems with it in Breezy+ndiswrapper+XP CD driver. But in dapper the system tries to load (unfortunately) the mrv8k module, as you can see: ------------------------------------- 4294685.511000] mrv8k: Marvel 8xxx Wireless driver, 0.0.2 [4294685.511000] mrv8k: Copyright(c) 2005 Luc Saillard [4294685.511000] mrv8k: mrv8k_init_one: enter [4294685.511000] ACPI: PCI Interrupt 0000:00:08.0[A] -> GSI 19 (level, low) -> IRQ 177 [4294685.511000] mrv8k: bar1 (0xdfff0000) relocated at 0xe0f80000 [4294685.511000] mrv8k: bar2 (0xdffe0000) relocated at 0xe0fa0000 [4294685.593000] 8139too Fast Ethernet driver 0.9.27 [4294685.698000] mrv8k: Firmware 'mrv8k-b.fw' not available or load failed. [4294685.698000] mrv8k: mrv8k_init_one: return -2 [4294685.698000] mrv8k: Command SET_RADIO. len=12 state=off preamble=auto [4294685.698000] mrv8k: queue command (dbde4200) [4294685.698000] mrv8k: kickoff command (dbde4200) (...) [4294686.705000] mrv8k: mrv8k_init_one: return -2 [4294686.705000] mrv8k: probe of 0000:00:08.0 failed with error -2 ------------------------------------ So I 'blacklisted' the module and installed ndiswrapper-utils. The .INF driver loaded successfully, but when I do 'modprobe ndiswrapper' the system freezes some seconds later :-( I hadn't this problems in Breezy... Isn't this a downgrade? Thank you! Fábio Silva - PORTUGAL (EU) Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: I'm an owner of an Asus WL-138G (Marvell W8300) wifi card. I hadn't problems with it in Breezy+ndiswrapper+XP CD driver. But in dapper the system tries to load (unfortunately) the mrv8k module, as you can see: ------------------------------------- 4294685.511000] mrv8k: Marvel 8xxx Wireless driver, 0.0.2 [4294685.511000] mrv8k: Copyright(c) 2005 Luc Saillard [4294685.511000] mrv8k: mrv8k_init_one: enter [4294685.511000] ACPI: PCI Interrupt 0000:00:08.0[A] -> GSI 19 (level, low) -> IRQ 177 [4294685.511000] mrv8k: bar1 (0xdfff0000) relocated at 0xe0f80000 [4294685.511000] mrv8k: bar2 (0xdffe0000) relocated at 0xe0fa0000 [4294685.593000] 8139too Fast Ethernet driver 0.9.27 [4294685.698000] mrv8k: Firmware 'mrv8k-b.fw' not available or load failed. [4294685.698000] mrv8k: mrv8k_init_one: return -2 [4294685.698000] mrv8k: Command SET_RADIO. len=12 state=off preamble=auto [4294685.698000] mrv8k: queue command (dbde4200) [4294685.698000] mrv8k: kickoff command (dbde4200) (...) [4294686.705000] mrv8k: mrv8k_init_one: return -2 [4294686.705000] mrv8k: probe of 0000:00:08.0 failed with error -2 ------------------------------------ So I 'blacklisted' the module and installed ndiswrapper-utils. The .INF driver loaded successfully, but when I do 'modprobe ndiswrapper' the system freezes some seconds later :-( I hadn't this problems in Breezy... Isn't this a downgrade? Thank you! Fábio Silva - PORTUGAL (EU) -- module 'mrv8k' doesn't load https://launchpad.net/malone/bugs/36322 From adconrad at 0c3.net Wed Apr 5 04:22:13 2006 From: adconrad at 0c3.net (Adam Conrad) Date: Wed, 05 Apr 2006 04:22:13 -0000 Subject: [Bug 36322] Re: module 'mrv8k' doesn't load References: <20060323231357.18295.12928.malonedeb@gandwana.ubuntu.com> Message-ID: <20060405042213.14649.46616.launchpad@gandwana.ubuntu.com> ** Changed in: linux-restricted-modules-2.6.15 (Ubuntu) Sourcepackagename: linux-restricted-modules-2.6.15 => linux-source-2.6.15 -- module 'mrv8k' doesn't load https://launchpad.net/malone/bugs/36322 From dn at offspringnet.net Wed Apr 5 04:31:38 2006 From: dn at offspringnet.net (grendel970) Date: Wed, 05 Apr 2006 04:31:38 -0000 Subject: [Bug 37881] Re: Parallel port printer not working References: <20060403150937.23108.72392.malonedeb@gandwana.ubuntu.com> Message-ID: <20060405043138.25542.23689.malone@gangotri.ubuntu.com> The following is my printer, this is one of 13 not configured to the acpi problem. pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0400 I have tried: pnpacpi=off pci=noapic,routeirq pci=routeirq acpi=off acpi=strict I have tried pnpacpi=off with ACPI v2.0 turned on at bios (off by default). All of these were with 0x378 and irq 7 set for the parallel port in bios with spp mode, and mostly with irq7 reserved. I think this is definitely an acpi problem. pnpacpi=off removes the error messages, and throughout all of these the printer is recognized, but it still will not work. I am guessing the magic point is (like in breezy) where I get acpi pnp configuring all devices, specifically my parallel port. -- Parallel port printer not working https://launchpad.net/malone/bugs/37881 From axl000 at gmail.com Wed Apr 5 05:26:33 2006 From: axl000 at gmail.com (Rodrigo Olivares) Date: Wed, 05 Apr 2006 05:26:33 -0000 Subject: [Bug 37975] Re: no sound in my laptop References: <20060404060657.23082.46696.malonedeb@gandwana.ubuntu.com> Message-ID: <20060405052633.14649.35894.malone@gandwana.ubuntu.com> root at axlmachine:/etc/modprobe.d# tail -2 /proc/asound/oss/sndstat Mixers: 0: Conexant id 31 -- no sound in my laptop https://launchpad.net/malone/bugs/37975 From hile at iki.fi Wed Apr 5 05:50:02 2006 From: hile at iki.fi (Ilkka Tuohela) Date: Wed, 05 Apr 2006 05:50:02 -0000 Subject: [Bug 32602] Re: Wrong firmware selected for a acx111 card References: <20060223131001.14968.23308.malonedeb@gangotri.ubuntu.com> Message-ID: <20060405055007.14649.66481.malone@gandwana.ubuntu.com> Yes, it is handled by kernel, but Ubuntu package has this comment in /lib/firmware/2.6.15-19-686/acx/readme.txt: The acx loads the firmware marked "default", unless you pass it another version using the firmware_ver=XXXX module parameter. If your card requires other than the default, please file a bug report to Ubuntu with the output of "lspci -vv", "lspci -vvn" and "lsusb". So, either this bug is to be handled by a ubuntu patch or this readme file is misleading (if the patch should go to upstream kernel). -- Wrong firmware selected for a acx111 card https://launchpad.net/malone/bugs/32602 From jeff250 at gmail.com Wed Apr 5 07:06:37 2006 From: jeff250 at gmail.com (Jeff250) Date: Wed, 05 Apr 2006 07:06:37 -0000 Subject: [Bug 35098] Re: Headphone Jack doesn't disable speakers References: <20060315193931.6537.15347.malonedeb@gangotri.ubuntu.com> Message-ID: <20060405070637.25542.47208.malone@gangotri.ubuntu.com> I can confirm this issue too. -- Headphone Jack doesn't disable speakers https://launchpad.net/malone/bugs/35098 From daniel.holbach at ubuntu.com Wed Apr 5 07:23:36 2006 From: daniel.holbach at ubuntu.com (Daniel Holbach) Date: Wed, 05 Apr 2006 07:23:36 -0000 Subject: [Bug 38058] Re: Everything locks up References: <20060404181106.25542.45586.malonedeb@gangotri.ubuntu.com> Message-ID: <20060405072337.14649.65920.malone@gandwana.ubuntu.com> Thanks for following up. ** Changed in: linux-source-2.6.15 ekiga (Ubuntu) Status: Unconfirmed => Fix Released -- Everything locks up https://launchpad.net/malone/bugs/38058 From tfheen at canonical.com Wed Apr 5 07:46:33 2006 From: tfheen at canonical.com (Tollef Fog Heen) Date: Wed, 05 Apr 2006 07:46:33 -0000 Subject: [Bug 33162] Re: Acer Travel Mate 3210 needs acpi=off References: <20060228154534.17498.22123.malonedeb@gangotri.ubuntu.com> Message-ID: <20060405074633.14572.57389.malone@gandwana.ubuntu.com> Ben, I tried your latest git kernel a few days ago and it worked fine on a Acer 3210, so if the original submitter could try again with dapper (either upgrade and test or a live cd), that'd be nice. It should work fine now, without acpi=off or noapic. -- Acer Travel Mate 3210 needs acpi=off https://launchpad.net/malone/bugs/33162 From lukasz.halman at gmail.com Wed Apr 5 08:02:23 2006 From: lukasz.halman at gmail.com (=?utf-8?q?=C5=81ukasz_Halman?=) Date: Wed, 05 Apr 2006 08:02:23 -0000 Subject: [Bug 37132] Re: Fan non-stop on after long suspend - MSI S260 References: <20060329082822.7863.46602.malonedeb@gangotri.ubuntu.com> Message-ID: <20060405080223.14572.32142.malone@gandwana.ubuntu.com> No, I didn't use totem and system load normal [~0%]. I can't reproduce it any longer, today notebook woke up without this problem after I had left it for whole night. Please close this bug. I'll reopen if it will happen again . -- Fan non-stop on after long suspend - MSI S260 https://launchpad.net/malone/bugs/37132 From pd at cipherfunk.org Wed Apr 5 08:16:47 2006 From: pd at cipherfunk.org (Paul Drain) Date: Wed, 05 Apr 2006 08:16:47 -0000 Subject: [Bug 32055] Re: Dapper flight 4 randomly crashes/freezes References: <20060220003757.1427.80656.malonedeb@gangotri.ubuntu.com> Message-ID: <20060405081647.25515.40421.malone@gangotri.ubuntu.com> on machines that are acpi-only (no apm), booting with pci=routeirq also seems to help. ... although, my machine with stable with Flight 4, the hardlocking problem started after Flight 5. -- Dapper flight 4 randomly crashes/freezes https://launchpad.net/malone/bugs/32055 From jon at tgpsolutions.com Wed Apr 5 08:39:50 2006 From: jon at tgpsolutions.com (Jon) Date: Wed, 05 Apr 2006 08:39:50 -0000 Subject: [Bug 35036] Re: No Thermal Fan support for PowerMac G5 1.8 References: <20060315123759.17018.76493.malonedeb@gangotri.ubuntu.com> Message-ID: <20060405083950.25542.1998.malone@gangotri.ubuntu.com> My PowerMac G5 does this as well; see my comment on https://launchpad.net/distros/ubuntu/+source/initramfs-tools/+bug/27269 for more details about my system. -- No Thermal Fan support for PowerMac G5 1.8 https://launchpad.net/malone/bugs/35036 From ingbert.braun at gmx.de Wed Apr 5 08:40:42 2006 From: ingbert.braun at gmx.de (ingbraun) Date: Wed, 05 Apr 2006 08:40:42 -0000 Subject: [Bug 37120] Re: wpasupplicant doesn't work properly with rt2500 driver References: <20060329054652.7313.48354.malonedeb@gangotri.ubuntu.com> Message-ID: <20060405084042.14572.78531.malone@gandwana.ubuntu.com> I have a similar problem with wpasupplicant in Flight 6. I use wpasupplicant with ndiswrapper driver (for DWL-510) and it worked with the same configuration in breezy (and fedora core 5), but on dapper its broken. On the debug output I get the same error as above for my ap/ssid: skip - no WPA/RSN IE Ndiswrapper sais hardware present and working and wpasupplicant can also detect ssids in the area, but can not associate to ap. Can anyone help? -- wpasupplicant doesn't work properly with rt2500 driver https://launchpad.net/malone/bugs/37120 From matk at gmx.de Wed Apr 5 09:03:50 2006 From: matk at gmx.de (matyk) Date: Wed, 05 Apr 2006 09:03:50 -0000 Subject: [Bug 33161] Re: PnPACPI errors on boot and no /dev/fd0 References: <20060228154107.17498.36793.malonedeb@gangotri.ubuntu.com> Message-ID: <20060405090350.25542.8365.launchpad@gangotri.ubuntu.com> ** Changed in: linux-source-2.6.15 linux-image-2.6.15-16-386 (Ubuntu) Severity: Normal => Critical Priority: None => High -- PnPACPI errors on boot and no /dev/fd0 https://launchpad.net/malone/bugs/33161 From milouny at gmx.net Wed Apr 5 09:16:26 2006 From: milouny at gmx.net (Eric Feliksik) Date: Wed, 05 Apr 2006 09:16:26 -0000 Subject: [Bug 37218] Re: system-crash, possibly because of bad video-driver References: <20060329203320.7863.83293.malonedeb@gangotri.ubuntu.com> Message-ID: <20060405091626.25515.56611.malone@gangotri.ubuntu.com> Note: I also followed the instruction of DebuggingSystemCrash to load the bios failsave defaults, because of AGP video issues. After that I only enabled my USB devices. The savage8-chip is on a shuttle sk41g motherboard. ** Attachment added: "kern.log directly after crash" http://librarian.launchpad.net/1932499/kern.log -- system-crash, possibly because of bad video-driver https://launchpad.net/malone/bugs/37218 From siretart at tauware.de Wed Apr 5 09:29:08 2006 From: siretart at tauware.de (Reinhard Tartler) Date: Wed, 05 Apr 2006 09:29:08 -0000 Subject: [Bug 37120] Re: [Bug 37120] Re: wpasupplicant doesn't work properly with rt2500 driver References: <20060329054652.7313.48354.malonedeb@gangotri.ubuntu.com> <20060405084042.14572.78531.malone@gandwana.ubuntu.com> Message-ID: <20060405092908.GH7346@tauware.de> > skip - no WPA/RSN IE usually this means that wpasupplicant has detected that the AP in question does not provide WPA > -- wpasupplicant doesn't work properly with rt2500 driver https://launchpad.net/malone/bugs/37120 From cjwatson at canonical.com Wed Apr 5 09:45:49 2006 From: cjwatson at canonical.com (Colin Watson) Date: Wed, 05 Apr 2006 09:45:49 -0000 Subject: [Bug 34161] Re: No nfs kernel support in mini.iso References: <20060309004352.28582.76396.malonedeb@gandwana.ubuntu.com> Message-ID: <20060405094549.14649.60464.malone@gandwana.ubuntu.com> debian-installer (20051026ubuntu27) dapper; urgency=low * debian/rules: Calculate SUITE correctly for uploads to pockets (e.g. dapper-security). * Add nfs-modules to all netboot initrds, except powerpc where yaboot won't be able to load the initrd if it gets much bigger (closes: Malone #34161). * Move to 2.6.15-20 kernels. -- Colin Watson Wed, 5 Apr 2006 10:14:33 +0100 ** Changed in: debian-installer (Ubuntu) Assignee: (unassigned) => Colin Watson Status: Unconfirmed => Fix Released -- No nfs kernel support in mini.iso https://launchpad.net/malone/bugs/34161 From casualprogrammer at yahoo.com Wed Apr 5 10:03:38 2006 From: casualprogrammer at yahoo.com (casualprogrammer) Date: Wed, 05 Apr 2006 10:03:38 -0000 Subject: [Bug 38130] Notebook (Sony Vaio PCG-SRX51P)does not recover from sleep mode References: <20060405055506.25515.44310.malonedeb@gangotri.ubuntu.com> Message-ID: <20060405100338.25542.67276.launchpad@canonical@gangotri.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: Not sure wether apm-sleep is the correct package to address, anyway X-11 does not seem to be the problem. This is happening with Dapper Drake flight 5 all updates as of 2006-04-05 07:00 applied. Hibernate works fine. Sleep mode looks good on first looks, everything goes off, only the power light blinks. On recovery, everything seems to be coming up alright, judging by the various lights indicating the process as disc activity and so on. The screen does not come alive. The keyboard seems to be accessible, as pressing keys causes disk activity. Pressing FN+F5, FN+F6 ( brightness control ) achieves nothing, pressing FN+F7 ( switching to/from external monitor neither ). Pressing CTL+ALT+DEL reboots correctly. The relevant portion ov /var/log/messages is: Enter Sleep mode: Apr 5 07:20:44 localhost gconfd (cjp-5001): SIGHUP empfangen, alle Datenbanken werden neu geladen Apr 5 07:20:45 localhost gconfd (cjp-5001): Die Adresse »xml:readonly:/etc/gconf/gconf.xml.mandatory« wurde an der Position 0 zu einer nur lesbaren Konfigurationsquelle aufgelöst Apr 5 07:20:45 localhost gconfd (cjp-5001): Die Adresse »xml:readwrite:/home/cjp/.gconf« wurde an der Position 1 zu einer schreibbaren Konfigurationsquelle aufgelöst Apr 5 07:20:45 localhost gconfd (cjp-5001): Die Adresse »xml:readonly:/etc/gconf/gconf.xml.defaults« wurde an der Position 2 zu einer nur lesbaren Konfigurationsquelle aufgelöst Apr 5 07:20:45 localhost gconfd (cjp-5001): Die Adresse »xml:readonly:/var/lib/gconf/debian.defaults« wurde an der Position 3 zu einer nur lesbaren Konfigurationsquelle aufgelöst Apr 5 07:20:45 localhost gconfd (cjp-5001): Die Adresse »xml:readonly:/var/lib/gconf/defaults« wurde an der Position 4 zu einer nur lesbaren Konfigurationsquelle aufgelöst Apr 5 07:21:14 localhost gconfd (cjp-5001): SIGHUP empfangen, alle Datenbanken werden neu geladen Apr 5 07:21:15 localhost gconfd (cjp-5001): Die Adresse »xml:readonly:/etc/gconf/gconf.xml.mandatory« wurde an der Position 0 zu einer nur lesbaren Konfigurationsquelle aufgelöst Apr 5 07:21:15 localhost gconfd (cjp-5001): Die Adresse »xml:readwrite:/home/cjp/.gconf« wurde an der Position 1 zu einer schreibbaren Konfigurationsquelle aufgelöst Apr 5 07:21:15 localhost gconfd (cjp-5001): Die Adresse »xml:readonly:/etc/gconf/gconf.xml.defaults« wurde an der Position 2 zu einer nur lesbaren Konfigurationsquelle aufgelöst Apr 5 07:21:15 localhost gconfd (cjp-5001): Die Adresse »xml:readonly:/var/lib/gconf/debian.defaults« wurde an der Position 3 zu einer nur lesbaren Konfigurationsquelle aufgelöst Apr 5 07:21:15 localhost gconfd (cjp-5001): Die Adresse »xml:readonly:/var/lib/gconf/defaults« wurde an der Position 4 zu einer nur lesbaren Konfigurationsquelle aufgelöst Apr 5 07:21:44 localhost gconfd (root-6038): (Version 2.14.0) wird gestartet, Prozesskennung 6038, Benutzer »root« Apr 5 07:21:44 localhost gconfd (root-6038): Die Adresse »xml:readonly:/etc/gconf/gconf.xml.mandatory« wurde an der Position 0 zu einer nur lesbaren Konfigurationsquelle aufgelöst Apr 5 07:21:44 localhost gconfd (root-6038): Die Adresse »xml:readwrite:/root/.gconf« wurde an der Position 1 zu einer schreibbaren Konfigurationsquelle aufgelöst Apr 5 07:21:44 localhost gconfd (root-6038): Die Adresse »xml:readonly:/etc/gconf/gconf.xml.defaults« wurde an der Position 2 zu einer nur lesbaren Konfigurationsquelle aufgelöst Apr 5 07:21:44 localhost gconfd (root-6038): Die Adresse »xml:readonly:/var/lib/gconf/debian.defaults« wurde an der Position 3 zu einer nur lesbaren Konfigurationsquelle aufgelöst Apr 5 07:21:44 localhost gconfd (root-6038): Die Adresse »xml:readonly:/var/lib/gconf/defaults« wurde an der Position 4 zu einer nur lesbaren Konfigurationsquelle aufgelöst Apr 5 07:24:14 localhost gconfd (root-6038): Der GConf-Server wird nicht verwendet und daher beendet. Apr 5 07:24:14 localhost gconfd (root-6038): Beenden Apr 5 07:24:17 localhost kernel: [4295516.711000] pcmcia: Detected deprecated PCMCIA ioctl usage. Apr 5 07:24:17 localhost kernel: [4295516.711000] pcmcia: This interface will soon be removed from the kernel; please expect breakage unless you upgrade to new tools. Apr 5 07:24:17 localhost kernel: [4295516.712000] pcmcia: see http://www.kernel.org/pub/linux/utils/kernel/pcmcia/pcmcia.html for details. Apr 5 07:24:17 localhost kernel: [4295516.712000] pccard: card ejected from slot 1 Apr 5 07:24:18 localhost kernel: [4295517.782000] ACPI: PCI interrupt for device 0000:01:08.0 disabled Apr 5 07:24:38 localhost kernel: [4295520.449000] Stopping tasks: ======================================================================================| Apr 5 07:24:38 localhost kernel: [4295520.456000] hci_usb 2-2:1.1: no suspend for driver hci_usb? Apr 5 07:24:38 localhost kernel: [4295520.456000] hci_usb 2-2:1.0: no suspend for driver hci_usb? Apr 5 07:24:38 localhost kernel: [4295520.459000] GTM info 78,14,ffffffff,ffffffff,3 Apr 5 07:24:38 localhost kernel: [4295521.085000] ACPI: PCI interrupt for device 0000:01:05.0 disabled Apr 5 07:24:38 localhost kernel: [4295521.085000] ACPI: PCI interrupt for device 0000:01:02.0 disabled Apr 5 07:24:38 localhost kernel: [4295521.085000] ACPI: PCI interrupt for device 0000:00:1f.5 disabled Apr 5 07:24:38 localhost kernel: [4295521.085000] ACPI: PCI interrupt for device 0000:00:1f.4 disabled Apr 5 07:24:38 localhost kernel: [4295521.085000] ACPI: PCI interrupt for device 0000:00:1f.2 disabled Apr 5 07:24:38 localhost kernel: [4295536.085000] **** SET: Misaligned resource pointer: c6e437c2 Type 07 Len 0 Apr 5 07:24:38 localhost last message repeated 6 times Apr 5 07:24:38 localhost kernel: [4295536.097000] ACPI: PCI Interrupt 0000:00:1f.2[D] -> Link [LNKD] -> GSI 9 (level, low) -> IRQ 9 Apr 5 07:24:38 localhost kernel: [4295536.098000] ACPI: PCI Interrupt 0000:00:1f.4[C] -> Link [LNKH] -> GSI 9 (level, low) -> IRQ 9 Apr 5 07:24:38 localhost kernel: [4295536.098000] ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 9 (level, low) -> IRQ 9 Apr 5 07:24:38 localhost kernel: [4295536.100000] PCI: Enabling device 0000:01:00.0 (0000 -> 0002) Apr 5 07:24:38 localhost kernel: [4295536.100000] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 9 (level, low) -> IRQ 9 Apr 5 07:24:38 localhost kernel: [4295536.100000] ACPI: PCI Interrupt 0000:01:02.0[A] -> Link [LNKC] -> GSI 9 (level, low) -> IRQ 9 Apr 5 07:24:38 localhost kernel: [4295536.100000] ACPI: PCI Interrupt 0000:01:05.0[A] -> Link [LNKF] -> GSI 9 (level, low) -> IRQ 9 Apr 5 07:24:38 localhost kernel: [4295536.165000] Start STM Apr 5 07:24:38 localhost kernel: [4295536.168000] start GTF Apr 5 07:24:38 localhost kernel: [4295536.168000] data 3,c,0,0,0,a0,ef Apr 5 07:24:38 localhost kernel: [4295536.168000] data 3,45,0,0,0,a0,ef Apr 5 07:24:38 localhost kernel: [4295538.411000] hci_usb 2-2:1.0: no resume for driver hci_usb? Apr 5 07:24:38 localhost kernel: [4295538.411000] hci_usb 2-2:1.1: no resume for driver hci_usb? Apr 5 07:24:38 localhost kernel: [4295538.661000] Restarting tasks...<6>usb 1-1: USB disconnect, address 2 Apr 5 07:24:38 localhost kernel: [4295538.748000] done Apr 5 07:24:38 localhost kernel: [4295538.816000] usb 2-1: reset full speed USB device using uhci_hcd and address 2 Apr 5 07:24:38 localhost kernel: [4295539.041000] usb 1-1: new low speed USB device using uhci_hcd and address 3 Apr 5 07:24:39 localhost kernel: [4295539.262000] input: JPC JPC USB MOUSE as /class/input/input6 Apr 5 07:24:39 localhost kernel: [4295539.262000] input: USB HID v1.00 Mouse [JPC JPC USB MOUSE] on usb-0000:00:1f.2-1 Apr 5 07:24:39 localhost kernel: [4295539.273000] usb 2-2: USB disconnect, address 3 Apr 5 07:24:39 localhost kernel: [4295539.329000] input: PS/2 Mouse as /class/input/input7 Apr 5 07:24:39 localhost kernel: [4295539.346000] input: AlpsPS/2 ALPS GlidePoint as /class/input/input8 Apr 5 07:24:39 localhost kernel: [4295539.731000] usb 2-2: new full speed USB device using uhci_hcd and address 4 Apr 5 07:24:41 localhost kernel: [4295541.801000] e100: Intel(R) PRO/100 Network Driver, 3.4.14-k4-NAPI Apr 5 07:24:41 localhost kernel: [4295541.802000] e100: Copyright(c) 1999-2005 Intel Corporation Apr 5 07:24:41 localhost kernel: [4295541.804000] ACPI: PCI Interrupt 0000:01:08.0[A] -> Link [LNKE] -> GSI 9 (level, low) -> IRQ 9 Apr 5 07:24:41 localhost kernel: [4295541.831000] e100: eth0: e100_probe: addr 0xf4100000, irq 9, MAC addr 08:00:46:54:1D:75 Apr 5 07:24:42 localhost kernel: [4295542.471000] pccard: PCMCIA card inserted into slot 1 Apr 5 07:24:42 localhost kernel: [4295542.471000] pcmcia: registering new device pcmcia1.0 Apr 5 07:24:45 localhost kernel: [4295543.370000] ADDRCONF(NETDEV_UP): eth1: link is not ready Apr 5 07:24:45 localhost kernel: [4295543.478000] eth1: New link status: Connected (0001) Apr 5 07:24:45 localhost kernel: [4295543.478000] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready Apr 5 07:24:46 localhost kernel: [4295544.249000] ACPI: Lid Switch [LID] Apr 5 07:24:46 localhost kernel: [4295544.250000] ACPI: Power Button (CM) [PWRB] Apr 5 07:24:47 localhost kernel: [4295545.408000] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) Apr 5 07:24:47 localhost kernel: [4295545.409000] ACPI: Processor [CPU0] (supports 8 throttling states) Apr 5 07:24:47 localhost kernel: [4295545.420000] ACPI: Thermal Zone [ATF0] (54 C) Apr 5 07:24:51 localhost gconfd (cjp-5001): Signal 15 erhalten, ordungsgemäßes Herunterfahren Apr 5 07:24:51 localhost gconfd (cjp-5001): Beenden Apr 5 07:24:52 localhost gconfd (cjp-6618): (Version 2.14.0) wird gestartet, Prozesskennung 6618, Benutzer »cjp« Apr 5 07:24:52 localhost gconfd (cjp-6618): Die Adresse »xml:readonly:/etc/gconf/gconf.xml.mandatory« wurde an der Position 0 zu einer nur lesbaren Konfigurationsquelle aufgelöst Apr 5 07:24:52 localhost gconfd (cjp-6618): Die Adresse »xml:readwrite:/home/cjp/.gconf« wurde an der Position 1 zu einer schreibbaren Konfigurationsquelle aufgelöst Apr 5 07:24:52 localhost gconfd (cjp-6618): Die Adresse »xml:readonly:/etc/gconf/gconf.xml.defaults« wurde an der Position 2 zu einer nur lesbaren Konfigurationsquelle aufgelöst Apr 5 07:24:52 localhost gconfd (cjp-6618): Die Adresse »xml:readonly:/var/lib/gconf/debian.defaults« wurde an der Position 3 zu einer nur lesbaren Konfigurationsquelle aufgelöst Apr 5 07:24:52 localhost gconfd (cjp-6618): Die Adresse »xml:readonly:/var/lib/gconf/defaults« wurde an der Position 4 zu einer nur lesbaren Konfigurationsquelle aufgelöst Apr 5 07:25:22 localhost gconfd (cjp-6618): Der GConf-Server wird nicht verwendet und daher beendet. Pressing CTL+ALT+DEL Apr 5 07:25:22 localhost gconfd (cjp-6618): Beenden Apr 5 07:26:53 localhost shutdown[6768]: shutting down for system reboot Apr 5 07:27:03 localhost kernel: [4295682.180000] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) Apr 5 07:27:03 localhost kernel: [4295682.180000] apm: disabled on user request. Apr 5 07:27:06 localhost kernel: Kernel logging (proc) stopped. Apr 5 07:27:06 localhost kernel: Kernel log daemon terminating. Apr 5 07:27:06 localhost exiting on signal 15 Apr 5 07:28:10 localhost syslogd 1.4.1#17ubuntu5: restart. Apr 5 07:28:10 localhost kernel: Inspecting /boot/System.map-2.6.15-19-386 Apr 5 07:28:11 localhost kernel: Loaded 22973 symbols from /boot/System.map-2.6.15-19-386. Apr 5 07:28:11 localhost kernel: Symbols match kernel version 2.6.15. Apr 5 07:28:11 localhost kernel: No module symbols loaded - kernel modules not enabled. Apr 5 07:28:11 localhost kernel: [4294667.296000] Linux version 2.6.15-19-386 (buildd at rothera) (gcc version 4.0.3 (Ubuntu 4.0.3-1ubuntu3)) #1 PREEMPT Mon Mar 20 16:46:02 UTC 2006 Apr 5 07:28:11 localhost kernel: [4294667.296000] BIOS-provided physical RAM map: Apr 5 07:28:11 localhost kernel: [4294667.296000] BIOS-e820: 0000000000000000 - 000000000009e800 (usable) Apr 5 07:28:11 localhost kernel: [4294667.296000] BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved) Apr 5 07:28:11 localhost kernel: [4294667.296000] BIOS-e820: 00000000000c0000 - 00000000000cc000 (reserved) Apr 5 07:28:11 localhost kernel: [4294667.296000] BIOS-e820: 00000000000d8000 - 0000000000100000 (reserved) Apr 5 07:28:11 localhost kernel: [4294667.296000] BIOS-e820: 0000000000100000 - 000000000fcf0000 (usable) Apr 5 07:28:11 localhost kernel: [4294667.296000] BIOS-e820: 000000000fcf0000 - 000000000fcfc000 (ACPI data) Apr 5 07:28:11 localhost kernel: [4294667.296000] BIOS-e820: 000000000fcfc000 - 000000000fd00000 (ACPI NVS) Apr 5 07:28:11 localhost kernel: [4294667.296000] BIOS-e820: 000000000fd00000 - 000000000fe80000 (usable) Apr 5 07:28:11 localhost kernel: [4294667.296000] BIOS-e820: 000000000fe80000 - 0000000010000000 (reserved) Apr 5 07:28:11 localhost kernel: [4294667.296000] BIOS-e820: 00000000ff800000 - 00000000ffc00000 (reserved) Apr 5 07:28:11 localhost kernel: [4294667.296000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) Apr 5 07:28:11 localhost kernel: [4294667.296000] 0MB HIGHMEM available. Apr 5 07:28:11 localhost kernel: [4294667.296000] 254MB LOWMEM available. Apr 5 07:28:11 localhost kernel: [4294667.296000] DMI present. Apr 5 07:28:11 localhost kernel: [4294667.296000] ACPI: PM-Timer IO Port: 0x1008 Apr 5 07:28:11 localhost kernel: [4294667.296000] Allocating PCI resources starting at 20000000 (gap: 10000000:ef800000) Apr 5 07:28:11 localhost kernel: [4294667.296000] Built 1 zonelists Apr 5 07:28:11 localhost kernel: [4294667.296000] Kernel command line: root=/dev/hda3 ro quiet splash Apr 5 07:28:11 localhost kernel: [4294667.296000] Local APIC disabled by BIOS (or by default) -- you can enable it with "lapic" Apr 5 07:28:11 localhost kernel: [4294667.296000] Initializing CPU#0 Apr 5 07:28:11 localhost kernel: [4294667.296000] PID hash table entries: 1024 (order: 10, 16384 bytes) Apr 5 07:28:11 localhost kernel: [4294667.296000] Detected 795.184 MHz processor. Apr 5 07:28:11 localhost kernel: [4294667.296000] Using pmtmr for high-res timesource Apr 5 07:28:11 localhost kernel: [4294667.296000] Console: colour VGA+ 80x25 Apr 5 07:28:11 localhost kernel: [4294667.425000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) Apr 5 07:28:11 localhost kernel: [4294667.426000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) Apr 5 07:28:11 localhost kernel: [4294667.448000] Memory: 248108k/260608k available (1971k kernel code, 11920k reserved, 599k data, 288k init, 0k highmem) Apr 5 07:28:11 localhost kernel: [4294667.448000] Checking if this processor honours the WP bit even in supervisor mode... Ok. Apr 5 07:28:11 localhost kernel: [4294667.508000] Calibrating delay using timer specific routine.. 1625.33 BogoMIPS (lpj=812665) Apr 5 07:28:11 localhost kernel: [4294667.508000] Security Framework v1.0.0 initialized Apr 5 07:28:11 localhost kernel: [4294667.508000] SELinux: Disabled at boot. Apr 5 07:28:11 localhost kernel: [4294667.508000] Mount-cache hash table entries: 512 Apr 5 07:28:11 localhost kernel: [4294667.508000] CPU: L1 I cache: 16K, L1 D cache: 16K Apr 5 07:28:11 localhost kernel: [4294667.508000] CPU: L2 cache: 512K Apr 5 07:28:11 localhost kernel: [4294667.508000] mtrr: v2.0 (20020519) Apr 5 07:28:11 localhost kernel: [4294667.508000] CPU: Intel(R) Pentium(R) III Mobile CPU 800MHz stepping 01 Apr 5 07:28:11 localhost kernel: [4294667.508000] Enabling fast FPU save and restore... done. Apr 5 07:28:11 localhost kernel: [4294667.508000] Enabling unmasked SIMD FPU exception support... done. Apr 5 07:28:11 localhost kernel: [4294667.508000] Checking 'hlt' instruction... OK. Apr 5 07:28:11 localhost kernel: [4294667.512000] checking if image is initramfs... it is Apr 5 07:28:11 localhost kernel: [4294669.482000] Freeing initrd memory: 6381k freed Apr 5 07:28:11 localhost kernel: [4294669.519000] ACPI: Looking for DSDT ... not found! Apr 5 07:28:11 localhost kernel: [4294669.528000] NET: Registered protocol family 16 Apr 5 07:28:11 localhost kernel: [4294669.528000] EISA bus registered Apr 5 07:28:11 localhost kernel: [4294669.528000] ACPI: bus type pci registered Apr 5 07:28:11 localhost kernel: [4294669.529000] PCI: PCI BIOS revision 2.10 entry at 0xfd9b0, last bus=1 Apr 5 07:28:11 localhost kernel: [4294669.529000] PCI: Using configuration type 1 Apr 5 07:28:11 localhost kernel: [4294669.530000] ACPI: Subsystem revision 20051216 Apr 5 07:28:11 localhost kernel: [4294669.536000] ACPI: Interpreter enabled Apr 5 07:28:11 localhost kernel: [4294669.536000] ACPI: Using PIC for interrupt routing Apr 5 07:28:11 localhost kernel: [4294669.536000] ACPI: PCI Root Bridge [PCI0] (0000:00) Apr 5 07:28:11 localhost kernel: [4294669.544000] PCI quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO Apr 5 07:28:11 localhost kernel: [4294669.544000] PCI quirk: region 1180-11bf claimed by ICH4 GPIO Apr 5 07:28:11 localhost kernel: [4294669.544000] PCI: Transparent bridge - 0000:00:1e.0 Apr 5 07:28:11 localhost kernel: [4294669.552000] ACPI: Embedded Controller [EC0] (gpe 28) interrupt mode. Apr 5 07:28:11 localhost kernel: [4294669.557000] ACPI: PCI Interrupt Link [LNKA] (IRQs *9) Apr 5 07:28:11 localhost kernel: [4294669.558000] ACPI: PCI Interrupt Link [LNKB] (IRQs *9) Apr 5 07:28:11 localhost kernel: [4294669.559000] ACPI: PCI Interrupt Link [LNKC] (IRQs 9) *0 Apr 5 07:28:11 localhost kernel: [4294669.559000] ACPI: PCI Interrupt Link [LNKD] (IRQs *9) Apr 5 07:28:11 localhost kernel: [4294669.560000] ACPI: PCI Interrupt Link [LNKE] (IRQs *9) Apr 5 07:28:11 localhost kernel: [4294669.560000] ACPI: PCI Interrupt Link [LNKF] (IRQs 9) *0, disabled. Apr 5 07:28:11 localhost kernel: [4294669.561000] ACPI: PCI Interrupt Link [LNKG] (IRQs 9) *0, disabled. Apr 5 07:28:11 localhost kernel: [4294669.562000] ACPI: PCI Interrupt Link [LNKH] (IRQs *9) Apr 5 07:28:11 localhost kernel: [4294669.562000] Linux Plug and Play Support v0.97 (c) Adam Belay Apr 5 07:28:11 localhost kernel: [4294669.562000] pnp: PnP ACPI init Apr 5 07:28:11 localhost kernel: [4294669.562000] pnp: PnPACPI: unknown resource type 7 Apr 5 07:28:11 localhost kernel: [4294669.562000] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0c02 Apr 5 07:28:11 localhost kernel: [4294669.563000] pnp: PnPACPI: unknown resource type 7 Apr 5 07:28:11 localhost kernel: [4294669.563000] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0c02 Apr 5 07:28:11 localhost kernel: [4294669.563000] pnp: PnPACPI: unknown resource type 7 Apr 5 07:28:11 localhost kernel: [4294669.563000] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0200 Apr 5 07:28:11 localhost kernel: [4294669.563000] pnp: PnPACPI: unknown resource type 7 Apr 5 07:28:11 localhost kernel: [4294669.563000] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0c04 Apr 5 07:28:11 localhost kernel: [4294669.563000] pnp: PnPACPI: unknown resource type 7 Apr 5 07:28:11 localhost kernel: [4294669.563000] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0b00 Apr 5 07:28:11 localhost kernel: [4294669.563000] pnp: PnPACPI: unknown resource type 7 Apr 5 07:28:11 localhost kernel: [4294669.563000] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0800 Apr 5 07:28:11 localhost kernel: [4294669.563000] pnp: PnPACPI: unknown resource type 7 Apr 5 07:28:11 localhost kernel: [4294669.563000] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0303 Apr 5 07:28:11 localhost kernel: [4294669.564000] pnp: PnPACPI: unknown resource type 7 Apr 5 07:28:11 localhost kernel: [4294669.564000] pnp: PnPACPI: METHOD_NAME__CRS failure for SNY9002 Apr 5 07:28:11 localhost kernel: [4294669.565000] pnp: PnPACPI: unknown resource type 7 Apr 5 07:28:11 localhost kernel: [4294669.565000] pnp: PnPACPI: METHOD_NAME__PRS failure for SNY6001 Apr 5 07:28:11 localhost kernel: [4294669.566000] pnp: PnP ACPI: found 1 devices Apr 5 07:28:11 localhost kernel: [4294669.566000] PnPBIOS: Disabled by ACPI PNP Apr 5 07:28:11 localhost kernel: [4294669.566000] PCI: Using ACPI for IRQ routing Apr 5 07:28:11 localhost kernel: [4294669.566000] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report Apr 5 07:28:11 localhost kernel: [4294669.572000] PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0 Apr 5 07:28:11 localhost kernel: [4294669.572000] PCI: Bus 2, cardbus bridge: 0000:01:02.0 Apr 5 07:28:11 localhost kernel: [4294669.572000] IO window: 00003400-000034ff Apr 5 07:28:11 localhost kernel: [4294669.572000] IO window: 00003800-000038ff Apr 5 07:28:11 localhost kernel: [4294669.572000] PREFETCH window: 20000000-21ffffff Apr 5 07:28:11 localhost kernel: [4294669.572000] MEM window: 24000000-25ffffff Apr 5 07:28:11 localhost kernel: [4294669.572000] PCI: Bus 6, cardbus bridge: 0000:01:05.0 Apr 5 07:28:11 localhost kernel: [4294669.572000] IO window: 00003c00-00003cff Apr 5 07:28:11 localhost kernel: [4294669.572000] IO window: 00001400-000014ff Apr 5 07:28:11 localhost kernel: [4294669.572000] PREFETCH window: 22000000-23ffffff Apr 5 07:28:11 localhost kernel: [4294669.572000] MEM window: 26000000-27ffffff Apr 5 07:28:11 localhost kernel: [4294669.572000] PCI: Bridge: 0000:00:1e.0 Apr 5 07:28:11 localhost kernel: [4294669.572000] IO window: 3000-3fff Apr 5 07:28:11 localhost kernel: [4294669.572000] MEM window: f4100000-f41fffff Apr 5 07:28:11 localhost kernel: [4294669.572000] PREFETCH window: 20000000-23ffffff Apr 5 07:28:11 localhost kernel: [4294669.572000] **** SET: Misaligned resource pointer: cf79d5e2 Type 07 Len 0 Apr 5 07:28:11 localhost kernel: [4294669.572000] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 9 Apr 5 07:28:11 localhost kernel: [4294669.572000] PCI: setting IRQ 9 as level-triggered Apr 5 07:28:11 localhost kernel: [4294669.572000] ACPI: PCI Interrupt 0000:01:02.0[A] -> Link [LNKC] -> GSI 9 (level, low) -> IRQ 9 Apr 5 07:28:11 localhost kernel: [4294669.572000] PCI: Enabling device 0000:01:05.0 (0000 -> 0003) Apr 5 07:28:11 localhost kernel: [4294669.572000] **** SET: Misaligned resource pointer: cf79d5e2 Type 07 Len 0 Apr 5 07:28:11 localhost kernel: [4294669.573000] ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 9 Apr 5 07:28:11 localhost kernel: [4294669.573000] ACPI: PCI Interrupt 0000:01:05.0[A] -> Link [LNKF] -> GSI 9 (level, low) -> IRQ 9 Apr 5 07:28:11 localhost kernel: [4294669.573000] Simple Boot Flag at 0x36 set to 0x1 Apr 5 07:28:11 localhost kernel: [4294669.574000] audit: initializing netlink socket (disabled) Apr 5 07:28:11 localhost kernel: [4294669.574000] audit(1144222054.573:1): initialized Apr 5 07:28:11 localhost kernel: [4294669.574000] VFS: Disk quotas dquot_6.5.1 Apr 5 07:28:11 localhost kernel: [4294669.574000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Apr 5 07:28:11 localhost kernel: [4294669.574000] Initializing Cryptographic API Apr 5 07:28:11 localhost kernel: [4294669.574000] io scheduler noop registered Apr 5 07:28:11 localhost kernel: [4294669.574000] io scheduler anticipatory registered Apr 5 07:28:11 localhost kernel: [4294669.574000] io scheduler deadline registered Apr 5 07:28:11 localhost kernel: [4294669.574000] io scheduler cfq registered Apr 5 07:28:11 localhost kernel: [4294669.575000] isapnp: Scanning for PnP cards... Apr 5 07:28:11 localhost kernel: [4294669.940000] isapnp: No Plug & Play device found Apr 5 07:28:11 localhost kernel: [4294669.973000] PNP: No PS/2 controller found. Probing ports directly. Apr 5 07:28:11 localhost kernel: [4294669.975000] serio: i8042 AUX port at 0x60,0x64 irq 12 Apr 5 07:28:11 localhost kernel: [4294669.975000] serio: i8042 KBD port at 0x60,0x64 irq 1 Apr 5 07:28:11 localhost kernel: [4294669.975000] Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled Apr 5 07:28:11 localhost kernel: [4294669.980000] **** SET: Misaligned resource pointer: cea75222 Type 07 Len 0 Apr 5 07:28:11 localhost kernel: [4294669.981000] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 9 Apr 5 07:28:11 localhost kernel: [4294669.981000] ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 9 (level, low) -> IRQ 9 Apr 5 07:28:11 localhost kernel: [4294669.981000] ACPI: PCI interrupt for device 0000:00:1f.6 disabled Apr 5 07:28:11 localhost kernel: [4294669.982000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize Apr 5 07:28:11 localhost kernel: [4294669.982000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 Apr 5 07:28:11 localhost kernel: [4294669.982000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx Apr 5 07:28:11 localhost kernel: [4294669.982000] ACPI: bus type ide registered Apr 5 07:28:11 localhost kernel: [4294669.982000] mice: PS/2 mouse device common for all mice Apr 5 07:28:11 localhost kernel: [4294669.983000] EISA: Probing bus 0 at eisa.0 Apr 5 07:28:11 localhost kernel: [4294669.983000] Cannot allocate resource for EISA slot 1 Apr 5 07:28:11 localhost kernel: [4294669.983000] Cannot allocate resource for EISA slot 2 Apr 5 07:28:11 localhost kernel: [4294669.983000] Cannot allocate resource for EISA slot 3 Apr 5 07:28:11 localhost kernel: [4294669.983000] EISA: Detected 0 cards. Apr 5 07:28:11 localhost kernel: [4294669.983000] NET: Registered protocol family 2 Apr 5 07:28:11 localhost kernel: [4294669.993000] IP route cache hash table entries: 2048 (order: 1, 8192 bytes) Apr 5 07:28:11 localhost kernel: [4294669.993000] TCP established hash table entries: 8192 (order: 3, 32768 bytes) Apr 5 07:28:11 localhost kernel: [4294669.993000] TCP bind hash table entries: 8192 (order: 3, 32768 bytes) Apr 5 07:28:11 localhost kernel: [4294669.993000] TCP: Hash tables configured (established 8192 bind 8192) Apr 5 07:28:11 localhost kernel: [4294669.993000] TCP reno registered Apr 5 07:28:11 localhost kernel: [4294669.994000] TCP bic registered Apr 5 07:28:11 localhost kernel: [4294669.994000] NET: Registered protocol family 1 Apr 5 07:28:11 localhost kernel: [4294669.994000] NET: Registered protocol family 8 Apr 5 07:28:11 localhost kernel: [4294669.994000] NET: Registered protocol family 20 Apr 5 07:28:11 localhost kernel: [4294669.994000] Using IPI Shortcut mode Apr 5 07:28:11 localhost kernel: [4294669.994000] ACPI wakeup devices: Apr 5 07:28:11 localhost kernel: [4294669.994000] PWRB LAN EC0 USB1 USB2 MODE Apr 5 07:28:11 localhost kernel: [4294669.994000] ACPI: (supports S0 S3 S4 S5) Apr 5 07:28:11 localhost kernel: [4294669.994000] Freeing unused kernel memory: 288k freed Apr 5 07:28:11 localhost kernel: [4294670.013000] input: AT Translated Set 2 keyboard as /class/input/input0 Apr 5 07:28:11 localhost kernel: [4294670.155000] vga16fb: mapped to 0xc00a0000 Apr 5 07:28:11 localhost kernel: [4294670.270000] Console: switching to colour frame buffer device 80x25 Apr 5 07:28:11 localhost kernel: [4294670.270000] fb0: VGA16 VGA frame buffer device Apr 5 07:28:11 localhost kernel: [4294671.391000] Real Time Clock Driver v1.12 Apr 5 07:28:11 localhost kernel: [4294671.402000] Capability LSM initialized Apr 5 07:28:11 localhost kernel: [4294671.472000] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) Apr 5 07:28:11 localhost kernel: [4294671.472000] ACPI: Processor [CPU0] (supports 8 throttling states) Apr 5 07:28:11 localhost kernel: [4294671.478000] ACPI: Thermal Zone [ATF0] (60 C) Apr 5 07:28:11 localhost kernel: [4294672.280000] ICH2M: IDE controller at PCI slot 0000:00:1f.1 Apr 5 07:28:11 localhost kernel: [4294672.280000] ICH2M: chipset revision 3 Apr 5 07:28:11 localhost kernel: [4294672.280000] ICH2M: not 100%% native mode: will probe irqs later Apr 5 07:28:11 localhost kernel: [4294672.280000] ide0: BM-DMA at 0x1800-0x1807, BIOS settings: hda:DMA, hdb:pio Apr 5 07:28:11 localhost kernel: [4294672.749000] hda: SAMSUNG MP0804H, ATA DISK drive Apr 5 07:28:11 localhost kernel: [4294673.361000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Apr 5 07:28:11 localhost kernel: [4294673.375000] hda: max request size: 1024KiB Apr 5 07:28:11 localhost kernel: [4294673.821000] hda: 156368016 sectors (80060 MB) w/8192KiB Cache, CHS=16383/255/63, UDMA(100) Apr 5 07:28:11 localhost kernel: [4294673.822000] hda: cache flushes supported Apr 5 07:28:11 localhost kernel: [4294673.822000] hda: hda1 hda2 hda3 hda4 < hda5 > Apr 5 07:28:11 localhost kernel: [4294674.325000] usbcore: registered new driver usbfs Apr 5 07:28:11 localhost kernel: [4294674.325000] usbcore: registered new driver hub Apr 5 07:28:11 localhost kernel: [4294674.330000] USB Universal Host Controller Interface driver v2.3 Apr 5 07:28:11 localhost kernel: [4294674.330000] **** SET: Misaligned resource pointer: ceac67e2 Type 07 Len 0 Apr 5 07:28:11 localhost kernel: [4294674.331000] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 9 Apr 5 07:28:11 localhost kernel: [4294674.331000] ACPI: PCI Interrupt 0000:00:1f.2[D] -> Link [LNKD] -> GSI 9 (level, low) -> IRQ 9 Apr 5 07:28:11 localhost kernel: [4294674.331000] uhci_hcd 0000:00:1f.2: UHCI Host Controller Apr 5 07:28:11 localhost kernel: [4294674.332000] uhci_hcd 0000:00:1f.2: new USB bus registered, assigned bus number 1 Apr 5 07:28:11 localhost kernel: [4294674.332000] uhci_hcd 0000:00:1f.2: irq 9, io base 0x00001820 Apr 5 07:28:11 localhost kernel: [4294674.333000] hub 1-0:1.0: USB hub found Apr 5 07:28:11 localhost kernel: [4294674.333000] hub 1-0:1.0: 2 ports detected Apr 5 07:28:11 localhost kernel: [4294674.434000] **** SET: Misaligned resource pointer: ceac64e2 Type 07 Len 0 Apr 5 07:28:11 localhost kernel: [4294674.435000] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 9 Apr 5 07:28:11 localhost kernel: [4294674.435000] ACPI: PCI Interrupt 0000:00:1f.4[C] -> Link [LNKH] -> GSI 9 (level, low) -> IRQ 9 Apr 5 07:28:11 localhost kernel: [4294674.435000] uhci_hcd 0000:00:1f.4: UHCI Host Controller Apr 5 07:28:11 localhost kernel: [4294674.435000] uhci_hcd 0000:00:1f.4: new USB bus registered, assigned bus number 2 Apr 5 07:28:11 localhost kernel: [4294674.435000] uhci_hcd 0000:00:1f.4: irq 9, io base 0x00002400 Apr 5 07:28:11 localhost kernel: [4294674.435000] hub 2-0:1.0: USB hub found Apr 5 07:28:11 localhost kernel: [4294674.435000] hub 2-0:1.0: 2 ports detected Apr 5 07:28:11 localhost kernel: [4294674.640000] usb 1-1: new low speed USB device using uhci_hcd and address 2 Apr 5 07:28:11 localhost kernel: [4294675.025000] usb 2-1: new full speed USB device using uhci_hcd and address 2 Apr 5 07:28:11 localhost kernel: [4294675.185000] SCSI subsystem initialized Apr 5 07:28:11 localhost kernel: [4294675.191000] Initializing USB Mass Storage driver... Apr 5 07:28:11 localhost kernel: [4294675.362000] usb 2-2: new full speed USB device using uhci_hcd and address 3 Apr 5 07:28:11 localhost kernel: [4294675.580000] usbcore: registered new driver hiddev Apr 5 07:28:11 localhost kernel: [4294675.581000] scsi0 : SCSI emulation for USB Mass Storage devices Apr 5 07:28:11 localhost kernel: [4294675.582000] usbcore: registered new driver usb-storage Apr 5 07:28:11 localhost kernel: [4294675.582000] USB Mass Storage support registered. Apr 5 07:28:11 localhost kernel: [4294675.606000] input: JPC JPC USB MOUSE as /class/input/input1 Apr 5 07:28:11 localhost kernel: [4294675.606000] input: USB HID v1.00 Mouse [JPC JPC USB MOUSE] on usb-0000:00:1f.2-1 Apr 5 07:28:11 localhost kernel: [4294675.606000] usbcore: registered new driver usbhid Apr 5 07:28:11 localhost kernel: [4294675.606000] drivers/usb/input/hid-core.c: v2.6:USB HID core driver Apr 5 07:28:11 localhost kernel: [4294675.825000] Attempting manual resume Apr 5 07:28:11 localhost kernel: [4294675.870000] EXT3-fs: mounted filesystem with ordered data mode. Apr 5 07:28:11 localhost kernel: [4294675.873000] kjournald starting. Commit interval 5 seconds Apr 5 07:28:11 localhost kernel: [4294680.584000] Vendor: Sony Model: MSC-U03 Rev: 1.00 Apr 5 07:28:11 localhost kernel: [4294680.584000] Type: Direct-Access ANSI SCSI revision: 00 Apr 5 07:28:11 localhost kernel: [4294687.844000] SCSI device sda: 253696 512-byte hdwr sectors (130 MB) Apr 5 07:28:11 localhost kernel: [4294687.846000] sda: Write Protect is off Apr 5 07:28:11 localhost kernel: [4294687.913000] SCSI device sda: 253696 512-byte hdwr sectors (130 MB) Apr 5 07:28:11 localhost kernel: [4294687.918000] sda: Write Protect is off Apr 5 07:28:11 localhost kernel: [4294687.918000] sda: sda1 Apr 5 07:28:11 localhost kernel: [4294687.930000] sd 0:0:0:0: Attached scsi removable disk sda Apr 5 07:28:11 localhost kernel: [4294687.962000] sd 0:0:0:0: Attached scsi generic sg0 type 0 Apr 5 07:28:11 localhost kernel: [4294688.457000] ts: Compaq touchscreen protocol output Apr 5 07:28:11 localhost kernel: [4294691.577000] Linux agpgart interface v0.101 (c) Dave Jones Apr 5 07:28:11 localhost kernel: [4294691.661000] agpgart: Detected an Intel i815 Chipset. Apr 5 07:28:11 localhost kernel: [4294691.699000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 Apr 5 07:28:11 localhost kernel: [4294691.934000] agpgart: AGP aperture is 64M @ 0xf8000000 Apr 5 07:28:11 localhost kernel: [4294691.934000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 Apr 5 07:28:11 localhost kernel: [4294691.958000] i810_smbus 0000:00:02.0: i810/i815 i2c device found. Apr 5 07:28:11 localhost kernel: [4294692.759000] ohci1394: $Rev: 1313 $ Ben Collins Apr 5 07:28:11 localhost kernel: [4294692.759000] **** SET: Misaligned resource pointer: cb7f7aa2 Type 07 Len 0 Apr 5 07:28:11 localhost kernel: [4294692.762000] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 9 Apr 5 07:28:11 localhost kernel: [4294692.762000] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 9 (level, low) -> IRQ 9 Apr 5 07:28:11 localhost kernel: [4294692.828000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[9] MMIO=[f4101000-f41017ff] Max Packet=[2048] Apr 5 07:28:11 localhost kernel: [4294692.894000] Bluetooth: Core ver 2.8 Apr 5 07:28:11 localhost kernel: [4294692.894000] NET: Registered protocol family 31 Apr 5 07:28:11 localhost kernel: [4294692.894000] Bluetooth: HCI device and connection manager initialized Apr 5 07:28:11 localhost kernel: [4294692.894000] Bluetooth: HCI socket layer initialized Apr 5 07:28:11 localhost kernel: [4294692.920000] ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 9 (level, low) -> IRQ 9 Apr 5 07:28:11 localhost kernel: [4294692.967000] Bluetooth: HCI USB driver ver 2.9 Apr 5 07:28:11 localhost kernel: [4294692.969000] usbcore: registered new driver hci_usb Apr 5 07:28:11 localhost kernel: [4294693.177000] input: PS/2 Mouse as /class/input/input2 Apr 5 07:28:11 localhost kernel: [4294693.194000] input: AlpsPS/2 ALPS GlidePoint as /class/input/input3 Apr 5 07:28:11 localhost kernel: [4294693.479000] intel8x0_measure_ac97_clock: measured 50314 usecs Apr 5 07:28:11 localhost kernel: [4294693.479000] intel8x0: clocking to 48000 Apr 5 07:28:11 localhost kernel: [4294693.967000] ACPI: PCI Interrupt 0000:01:02.0[A] -> Link [LNKC] -> GSI 9 (level, low) -> IRQ 9 Apr 5 07:28:11 localhost kernel: [4294693.967000] Yenta: CardBus bridge found at 0000:01:02.0 [104d:80f2] Apr 5 07:28:11 localhost kernel: [4294694.089000] Yenta: ISA IRQ mask 0x0cb8, PCI irq 9 Apr 5 07:28:11 localhost kernel: [4294694.089000] Socket status: 30000006 Apr 5 07:28:11 localhost kernel: [4294694.089000] pcmcia: parent PCI bridge I/O window: 0x3000 - 0x3fff Apr 5 07:28:11 localhost kernel: [4294694.089000] cs: IO port probe 0x3000-0x3fff: clean. Apr 5 07:28:11 localhost kernel: [4294694.090000] pcmcia: parent PCI bridge Memory window: 0xf4100000 - 0xf41fffff Apr 5 07:28:11 localhost kernel: [4294694.090000] pcmcia: parent PCI bridge Memory window: 0x20000000 - 0x23ffffff Apr 5 07:28:11 localhost kernel: [4294694.257000] ACPI: PCI Interrupt 0000:01:05.0[A] -> Link [LNKF] -> GSI 9 (level, low) -> IRQ 9 Apr 5 07:28:11 localhost kernel: [4294694.257000] Yenta: CardBus bridge found at 0000:01:05.0 [12a3:ab01] Apr 5 07:28:11 localhost kernel: [4294694.257000] Yenta: Enabling burst memory read transactions Apr 5 07:28:11 localhost kernel: [4294694.257000] Yenta: Using CSCINT to route CSC interrupts to PCI Apr 5 07:28:11 localhost kernel: [4294694.257000] Yenta: Routing CardBus interrupts to PCI Apr 5 07:28:11 localhost kernel: [4294694.257000] Yenta TI: socket 0000:01:05.0, mfunc 0x01000002, devctl 0x60 Apr 5 07:28:11 localhost kernel: [4294694.368000] e100: Intel(R) PRO/100 Network Driver, 3.4.14-k4-NAPI Apr 5 07:28:11 localhost kernel: [4294694.368000] e100: Copyright(c) 1999-2005 Intel Corporation Apr 5 07:28:11 localhost kernel: [4294694.480000] Yenta: ISA IRQ mask 0x0000, PCI irq 9 Apr 5 07:28:11 localhost kernel: [4294694.480000] Socket status: 30000011 Apr 5 07:28:11 localhost kernel: [4294694.480000] pcmcia: parent PCI bridge I/O window: 0x3000 - 0x3fff Apr 5 07:28:11 localhost kernel: [4294694.480000] cs: IO port probe 0x3000-0x3fff: clean. Apr 5 07:28:11 localhost kernel: [4294694.481000] pcmcia: parent PCI bridge Memory window: 0xf4100000 - 0xf41fffff Apr 5 07:28:11 localhost kernel: [4294694.481000] pcmcia: parent PCI bridge Memory window: 0x20000000 - 0x23ffffff Apr 5 07:28:11 localhost kernel: [4294694.495000] **** SET: Misaligned resource pointer: cab0bde2 Type 07 Len 0 Apr 5 07:28:11 localhost kernel: [4294694.495000] ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 9 Apr 5 07:28:11 localhost kernel: [4294694.495000] ACPI: PCI Interrupt 0000:01:08.0[A] -> Link [LNKE] -> GSI 9 (level, low) -> IRQ 9 Apr 5 07:28:11 localhost kernel: [4294694.521000] e100: eth0: e100_probe: addr 0xf4100000, irq 9, MAC addr 08:00:46:54:1D:75 Apr 5 07:28:11 localhost kernel: [4294695.209000] pccard: PCMCIA card inserted into slot 1 Apr 5 07:28:11 localhost kernel: [4294695.209000] cs: memory probe 0xf4100000-0xf41fffff: excluding 0xf4100000-0xf410ffff Apr 5 07:28:11 localhost kernel: [4294695.217000] pcmcia: registering new device pcmcia1.0 Apr 5 07:28:11 localhost kernel: [4294695.368000] cs: IO port probe 0x100-0x3af: clean. Apr 5 07:28:11 localhost kernel: [4294695.370000] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7 Apr 5 07:28:11 localhost kernel: [4294695.370000] cs: IO port probe 0x820-0x8ff: clean. Apr 5 07:28:11 localhost kernel: [4294695.371000] cs: IO port probe 0xc00-0xcf7: clean. Apr 5 07:28:11 localhost kernel: [4294695.372000] cs: IO port probe 0xa00-0xaff: clean. Apr 5 07:28:11 localhost kernel: [4294695.426000] cs: IO port probe 0x100-0x3af: clean. Apr 5 07:28:11 localhost kernel: [4294695.428000] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7 Apr 5 07:28:11 localhost kernel: [4294695.429000] cs: IO port probe 0x820-0x8ff: clean. Apr 5 07:28:11 localhost kernel: [4294695.429000] cs: IO port probe 0xc00-0xcf7: clean. Apr 5 07:28:11 localhost kernel: [4294695.430000] cs: IO port probe 0xa00-0xaff: clean. Apr 5 07:28:11 localhost kernel: [4294695.618000] hostap_cs: 0.4.4-kernel (Jouni Malinen ) Apr 5 07:28:11 localhost kernel: [4294696.112000] lp: driver loaded but no devices found Apr 5 07:28:11 localhost kernel: [4294696.167000] eth1: New link status: Connected (0001) Apr 5 07:28:11 localhost kernel: [4294696.191000] sbp2: $Rev: 1306 $ Ben Collins Apr 5 07:28:11 localhost kernel: [4294696.191000] ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1) Apr 5 07:28:11 localhost kernel: [4294696.191000] ieee1394: sbp2: Try serialize_io=0 for better performance Apr 5 07:28:11 localhost kernel: [4294696.342000] Adding 698788k swap on /dev/hda5. Priority:-1 extents:1 across:698788k Apr 5 07:28:11 localhost kernel: [4294696.483000] EXT3 FS on hda3, internal journal Apr 5 07:28:11 localhost kernel: [4294696.733000] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 Apr 5 07:28:11 localhost kernel: [4294696.733000] md: bitmap version 4.39 Apr 5 07:28:11 localhost kernel: [4294697.361000] NET: Registered protocol family 17 Apr 5 07:28:11 localhost kernel: [4294697.612000] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel at redhat.com Apr 5 07:28:11 localhost kernel: [4294699.539000] NTFS driver 2.1.25 [Flags: R/O MODULE]. Apr 5 07:28:11 localhost kernel: [4294699.611000] NTFS volume version 3.1. Apr 5 07:28:11 localhost kernel: [4294699.645000] NTFS volume version 3.1. Apr 5 07:28:11 localhost kernel: [4294701.457000] NET: Registered protocol family 10 Apr 5 07:28:11 localhost kernel: [4294701.457000] lo: Disabled Privacy Extensions Apr 5 07:28:11 localhost kernel: [4294701.458000] IPv6 over IPv4 tunneling driver Apr 5 07:28:11 localhost kernel: [4294704.574000] ACPI: AC Adapter [ACAD] (on-line) Apr 5 07:28:11 localhost kernel: [4294704.583000] ACPI: Battery Slot [BAT1] (battery present) Apr 5 07:28:11 localhost kernel: [4294704.753000] ACPI: Lid Switch [LID] Apr 5 07:28:11 localhost kernel: [4294704.753000] ACPI: Power Button (CM) [PWRB] Apr 5 07:28:11 localhost kernel: [4294705.075000] ACPI Sony Notebook Control Driver v0.2 successfully installed Apr 5 07:28:11 localhost kernel: [4294705.227000] ACPI: Video Device [GCH0] (multi-head: yes rom: yes post: no) Apr 5 07:28:21 localhost hpiod: 0.9.6 accepting connections at 4671... Apr 5 07:28:22 localhost kernel: [4294718.296000] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) Apr 5 07:28:22 localhost kernel: [4294718.296000] apm: overridden by ACPI. Apr 5 07:28:23 localhost kernel: [4294718.709000] input: Sony Vaio Jogdial as /class/input/input4 Apr 5 07:28:23 localhost kernel: [4294718.710000] input: Sony Vaio Keys as /class/input/input5 Apr 5 07:28:23 localhost kernel: [4294719.067000] sonypi: Sony Programmable I/O Controller Driverv1.26. Apr 5 07:28:23 localhost kernel: [4294719.067000] sonypi: detected type2 model, verbose = 0, fnkeyinit = off, camera = off, compat = off, mask = 0xffffffff, useinput = on, acpi = on Apr 5 07:28:23 localhost kernel: [4294719.067000] sonypi: enabled at irq=11, port1=0x1080, port2=0x1084 Apr 5 07:28:23 localhost kernel: [4294719.067000] sonypi: device allocated minor is 61 Apr 5 07:28:26 localhost kernel: [4294722.376000] Bluetooth: L2CAP ver 2.8 Apr 5 07:28:26 localhost kernel: [4294722.376000] Bluetooth: L2CAP socket layer initialized Apr 5 07:28:27 localhost kernel: [4294722.575000] Bluetooth: RFCOMM socket layer initialized Apr 5 07:28:27 localhost kernel: [4294722.575000] Bluetooth: RFCOMM TTY layer initialized Apr 5 07:28:27 localhost kernel: [4294722.575000] Bluetooth: RFCOMM ver 1.7 Apr 5 07:28:38 localhost gconfd (cjp-4999): (Version 2.14.0) wird gestartet, Prozesskennung 4999, Benutzer »cjp« Apr 5 07:28:38 localhost gconfd (cjp-4999): Die Adresse »xml:readonly:/etc/gconf/gconf.xml.mandatory« wurde an der Position 0 zu einer nur lesbaren Konfigurationsquelle aufgelöst Apr 5 07:28:38 localhost gconfd (cjp-4999): Die Adresse »xml:readwrite:/home/cjp/.gconf« wurde an der Position 1 zu einer schreibbaren Konfigurationsquelle aufgelöst Apr 5 07:28:38 localhost gconfd (cjp-4999): Die Adresse »xml:readonly:/etc/gconf/gconf.xml.defaults« wurde an der Position 2 zu einer nur lesbaren Konfigurationsquelle aufgelöst Apr 5 07:28:38 localhost gconfd (cjp-4999): Die Adresse »xml:readonly:/var/lib/gconf/debian.defaults« wurde an der Position 3 zu einer nur lesbaren Konfigurationsquelle aufgelöst Apr 5 07:28:38 localhost gconfd (cjp-4999): Die Adresse »xml:readonly:/var/lib/gconf/defaults« wurde an der Position 4 zu einer nur lesbaren Konfigurationsquelle aufgelöst Apr 5 07:28:45 localhost gconfd (cjp-4999): Die Adresse »xml:readwrite:/home/cjp/.gconf« wurde an der Position 0 zu einer schreibbaren Konfigurationsquelle aufgelöst Apr 5 07:29:28 localhost gconfd (root-5162): (Version 2.14.0) wird gestartet, Prozesskennung 5162, Benutzer »root« Apr 5 07:29:28 localhost gconfd (root-5162): Die Adresse »xml:readonly:/etc/gconf/gconf.xml.mandatory« wurde an der Position 0 zu einer nur lesbaren Konfigurationsquelle aufgelöst Apr 5 07:29:28 localhost gconfd (root-5162): Die Adresse »xml:readwrite:/root/.gconf« wurde an der Position 1 zu einer schreibbaren Konfigurationsquelle aufgelöst Apr 5 07:29:28 localhost gconfd (root-5162): Die Adresse »xml:readonly:/etc/gconf/gconf.xml.defaults« wurde an der Position 2 zu einer nur lesbaren Konfigurationsquelle aufgelöst Apr 5 07:29:28 localhost gconfd (root-5162): Die Adresse »xml:readonly:/var/lib/gconf/debian.defaults« wurde an der Position 3 zu einer nur lesbaren Konfigurationsquelle aufgelöst Apr 5 07:29:28 localhost gconfd (root-5162): Die Adresse »xml:readonly:/var/lib/gconf/defaults« wurde an der Position 4 zu einer nur lesbaren Konfigurationsquelle aufgelöst Note: the original reporter indicated the bug was in package 'apm-sleep'; however, that package was not published in Ubuntu. Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: Not sure wether apm-sleep is the correct package to address, anyway X-11 does not seem to be the problem. This is happening with Dapper Drake flight 5 all updates as of 2006-04-05 07:00 applied. Hibernate works fine. Sleep mode looks good on first looks, everything goes off, only the power light blinks. On recovery, everything seems to be coming up alright, judging by the various lights indicating the process as disc activity and so on. The screen does not come alive. The keyboard seems to be accessible, as pressing keys causes disk activity. Pressing FN+F5, FN+F6 ( brightness control ) achieves nothing, pressing FN+F7 ( switching to/from external monitor neither ). Pressing CTL+ALT+DEL reboots correctly. The relevant portion ov /var/log/messages is: Enter Sleep mode: Apr 5 07:20:44 localhost gconfd (cjp-5001): SIGHUP empfangen, alle Datenbanken werden neu geladen Apr 5 07:20:45 localhost gconfd (cjp-5001): Die Adresse »xml:readonly:/etc/gconf/gconf.xml.mandatory« wurde an der Position 0 zu einer nur lesbaren Konfigurationsquelle aufgelöst Apr 5 07:20:45 localhost gconfd (cjp-5001): Die Adresse »xml:readwrite:/home/cjp/.gconf« wurde an der Position 1 zu einer schreibbaren Konfigurationsquelle aufgelöst Apr 5 07:20:45 localhost gconfd (cjp-5001): Die Adresse »xml:readonly:/etc/gconf/gconf.xml.defaults« wurde an der Position 2 zu einer nur lesbaren Konfigurationsquelle aufgelöst Apr 5 07:20:45 localhost gconfd (cjp-5001): Die Adresse »xml:readonly:/var/lib/gconf/debian.defaults« wurde an der Position 3 zu einer nur lesbaren Konfigurationsquelle aufgelöst Apr 5 07:20:45 localhost gconfd (cjp-5001): Die Adresse »xml:readonly:/var/lib/gconf/defaults« wurde an der Position 4 zu einer nur lesbaren Konfigurationsquelle aufgelöst Apr 5 07:21:14 localhost gconfd (cjp-5001): SIGHUP empfangen, alle Datenbanken werden neu geladen Apr 5 07:21:15 localhost gconfd (cjp-5001): Die Adresse »xml:readonly:/etc/gconf/gconf.xml.mandatory« wurde an der Position 0 zu einer nur lesbaren Konfigurationsquelle aufgelöst Apr 5 07:21:15 localhost gconfd (cjp-5001): Die Adresse »xml:readwrite:/home/cjp/.gconf« wurde an der Position 1 zu einer schreibbaren Konfigurationsquelle aufgelöst Apr 5 07:21:15 localhost gconfd (cjp-5001): Die Adresse »xml:readonly:/etc/gconf/gconf.xml.defaults« wurde an der Position 2 zu einer nur lesbaren Konfigurationsquelle aufgelöst Apr 5 07:21:15 localhost gconfd (cjp-5001): Die Adresse »xml:readonly:/var/lib/gconf/debian.defaults« wurde an der Position 3 zu einer nur lesbaren Konfigurationsquelle aufgelöst Apr 5 07:21:15 localhost gconfd (cjp-5001): Die Adresse »xml:readonly:/var/lib/gconf/defaults« wurde an der Position 4 zu einer nur lesbaren Konfigurationsquelle aufgelöst Apr 5 07:21:44 localhost gconfd (root-6038): (Version 2.14.0) wird gestartet, Prozesskennung 6038, Benutzer »root« Apr 5 07:21:44 localhost gconfd (root-6038): Die Adresse »xml:readonly:/etc/gconf/gconf.xml.mandatory« wurde an der Position 0 zu einer nur lesbaren Konfigurationsquelle aufgelöst Apr 5 07:21:44 localhost gconfd (root-6038): Die Adresse »xml:readwrite:/root/.gconf« wurde an der Position 1 zu einer schreibbaren Konfigurationsquelle aufgelöst Apr 5 07:21:44 localhost gconfd (root-6038): Die Adresse »xml:readonly:/etc/gconf/gconf.xml.defaults« wurde an der Position 2 zu einer nur lesbaren Konfigurationsquelle aufgelöst Apr 5 07:21:44 localhost gconfd (root-6038): Die Adresse »xml:readonly:/var/lib/gconf/debian.defaults« wurde an der Position 3 zu einer nur lesbaren Konfigurationsquelle aufgelöst Apr 5 07:21:44 localhost gconfd (root-6038): Die Adresse »xml:readonly:/var/lib/gconf/defaults« wurde an der Position 4 zu einer nur lesbaren Konfigurationsquelle aufgelöst Apr 5 07:24:14 localhost gconfd (root-6038): Der GConf-Server wird nicht verwendet und daher beendet. Apr 5 07:24:14 localhost gconfd (root-6038): Beenden Apr 5 07:24:17 localhost kernel: [4295516.711000] pcmcia: Detected deprecated PCMCIA ioctl usage. Apr 5 07:24:17 localhost kernel: [4295516.711000] pcmcia: This interface will soon be removed from the kernel; please expect breakage unless you upgrade to new tools. Apr 5 07:24:17 localhost kernel: [4295516.712000] pcmcia: see http://www.kernel.org/pub/linux/utils/kernel/pcmcia/pcmcia.html for details. Apr 5 07:24:17 localhost kernel: [4295516.712000] pccard: card ejected from slot 1 Apr 5 07:24:18 localhost kernel: [4295517.782000] ACPI: PCI interrupt for device 0000:01:08.0 disabled Apr 5 07:24:38 localhost kernel: [4295520.449000] Stopping tasks: ======================================================================================| Apr 5 07:24:38 localhost kernel: [4295520.456000] hci_usb 2-2:1.1: no suspend for driver hci_usb? Apr 5 07:24:38 localhost kernel: [4295520.456000] hci_usb 2-2:1.0: no suspend for driver hci_usb? Apr 5 07:24:38 localhost kernel: [4295520.459000] GTM info 78,14,ffffffff,ffffffff,3 Apr 5 07:24:38 localhost kernel: [4295521.085000] ACPI: PCI interrupt for device 0000:01:05.0 disabled Apr 5 07:24:38 localhost kernel: [4295521.085000] ACPI: PCI interrupt for device 0000:01:02.0 disabled Apr 5 07:24:38 localhost kernel: [4295521.085000] ACPI: PCI interrupt for device 0000:00:1f.5 disabled Apr 5 07:24:38 localhost kernel: [4295521.085000] ACPI: PCI interrupt for device 0000:00:1f.4 disabled Apr 5 07:24:38 localhost kernel: [4295521.085000] ACPI: PCI interrupt for device 0000:00:1f.2 disabled Apr 5 07:24:38 localhost kernel: [4295536.085000] **** SET: Misaligned resource pointer: c6e437c2 Type 07 Len 0 Apr 5 07:24:38 localhost last message repeated 6 times Apr 5 07:24:38 localhost kernel: [4295536.097000] ACPI: PCI Interrupt 0000:00:1f.2[D] -> Link [LNKD] -> GSI 9 (level, low) -> IRQ 9 Apr 5 07:24:38 localhost kernel: [4295536.098000] ACPI: PCI Interrupt 0000:00:1f.4[C] -> Link [LNKH] -> GSI 9 (level, low) -> IRQ 9 Apr 5 07:24:38 localhost kernel: [4295536.098000] ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 9 (level, low) -> IRQ 9 Apr 5 07:24:38 localhost kernel: [4295536.100000] PCI: Enabling device 0000:01:00.0 (0000 -> 0002) Apr 5 07:24:38 localhost kernel: [4295536.100000] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 9 (level, low) -> IRQ 9 Apr 5 07:24:38 localhost kernel: [4295536.100000] ACPI: PCI Interrupt 0000:01:02.0[A] -> Link [LNKC] -> GSI 9 (level, low) -> IRQ 9 Apr 5 07:24:38 localhost kernel: [4295536.100000] ACPI: PCI Interrupt 0000:01:05.0[A] -> Link [LNKF] -> GSI 9 (level, low) -> IRQ 9 Apr 5 07:24:38 localhost kernel: [4295536.165000] Start STM Apr 5 07:24:38 localhost kernel: [4295536.168000] start GTF Apr 5 07:24:38 localhost kernel: [4295536.168000] data 3,c,0,0,0,a0,ef Apr 5 07:24:38 localhost kernel: [4295536.168000] data 3,45,0,0,0,a0,ef Apr 5 07:24:38 localhost kernel: [4295538.411000] hci_usb 2-2:1.0: no resume for driver hci_usb? Apr 5 07:24:38 localhost kernel: [4295538.411000] hci_usb 2-2:1.1: no resume for driver hci_usb? Apr 5 07:24:38 localhost kernel: [4295538.661000] Restarting tasks...<6>usb 1-1: USB disconnect, address 2 Apr 5 07:24:38 localhost kernel: [4295538.748000] done Apr 5 07:24:38 localhost kernel: [4295538.816000] usb 2-1: reset full speed USB device using uhci_hcd and address 2 Apr 5 07:24:38 localhost kernel: [4295539.041000] usb 1-1: new low speed USB device using uhci_hcd and address 3 Apr 5 07:24:39 localhost kernel: [4295539.262000] input: JPC JPC USB MOUSE as /class/input/input6 Apr 5 07:24:39 localhost kernel: [4295539.262000] input: USB HID v1.00 Mouse [JPC JPC USB MOUSE] on usb-0000:00:1f.2-1 Apr 5 07:24:39 localhost kernel: [4295539.273000] usb 2-2: USB disconnect, address 3 Apr 5 07:24:39 localhost kernel: [4295539.329000] input: PS/2 Mouse as /class/input/input7 Apr 5 07:24:39 localhost kernel: [4295539.346000] input: AlpsPS/2 ALPS GlidePoint as /class/input/input8 Apr 5 07:24:39 localhost kernel: [4295539.731000] usb 2-2: new full speed USB device using uhci_hcd and address 4 Apr 5 07:24:41 localhost kernel: [4295541.801000] e100: Intel(R) PRO/100 Network Driver, 3.4.14-k4-NAPI Apr 5 07:24:41 localhost kernel: [4295541.802000] e100: Copyright(c) 1999-2005 Intel Corporation Apr 5 07:24:41 localhost kernel: [4295541.804000] ACPI: PCI Interrupt 0000:01:08.0[A] -> Link [LNKE] -> GSI 9 (level, low) -> IRQ 9 Apr 5 07:24:41 localhost kernel: [4295541.831000] e100: eth0: e100_probe: addr 0xf4100000, irq 9, MAC addr 08:00:46:54:1D:75 Apr 5 07:24:42 localhost kernel: [4295542.471000] pccard: PCMCIA card inserted into slot 1 Apr 5 07:24:42 localhost kernel: [4295542.471000] pcmcia: registering new device pcmcia1.0 Apr 5 07:24:45 localhost kernel: [4295543.370000] ADDRCONF(NETDEV_UP): eth1: link is not ready Apr 5 07:24:45 localhost kernel: [4295543.478000] eth1: New link status: Connected (0001) Apr 5 07:24:45 localhost kernel: [4295543.478000] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready Apr 5 07:24:46 localhost kernel: [4295544.249000] ACPI: Lid Switch [LID] Apr 5 07:24:46 localhost kernel: [4295544.250000] ACPI: Power Button (CM) [PWRB] Apr 5 07:24:47 localhost kernel: [4295545.408000] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) Apr 5 07:24:47 localhost kernel: [4295545.409000] ACPI: Processor [CPU0] (supports 8 throttling states) Apr 5 07:24:47 localhost kernel: [4295545.420000] ACPI: Thermal Zone [ATF0] (54 C) Apr 5 07:24:51 localhost gconfd (cjp-5001): Signal 15 erhalten, ordungsgemäßes Herunterfahren Apr 5 07:24:51 localhost gconfd (cjp-5001): Beenden Apr 5 07:24:52 localhost gconfd (cjp-6618): (Version 2.14.0) wird gestartet, Prozesskennung 6618, Benutzer »cjp« Apr 5 07:24:52 localhost gconfd (cjp-6618): Die Adresse »xml:readonly:/etc/gconf/gconf.xml.mandatory« wurde an der Position 0 zu einer nur lesbaren Konfigurationsquelle aufgelöst Apr 5 07:24:52 localhost gconfd (cjp-6618): Die Adresse »xml:readwrite:/home/cjp/.gconf« wurde an der Position 1 zu einer schreibbaren Konfigurationsquelle aufgelöst Apr 5 07:24:52 localhost gconfd (cjp-6618): Die Adresse »xml:readonly:/etc/gconf/gconf.xml.defaults« wurde an der Position 2 zu einer nur lesbaren Konfigurationsquelle aufgelöst Apr 5 07:24:52 localhost gconfd (cjp-6618): Die Adresse »xml:readonly:/var/lib/gconf/debian.defaults« wurde an der Position 3 zu einer nur lesbaren Konfigurationsquelle aufgelöst Apr 5 07:24:52 localhost gconfd (cjp-6618): Die Adresse »xml:readonly:/var/lib/gconf/defaults« wurde an der Position 4 zu einer nur lesbaren Konfigurationsquelle aufgelöst Apr 5 07:25:22 localhost gconfd (cjp-6618): Der GConf-Server wird nicht verwendet und daher beendet. Pressing CTL+ALT+DEL Apr 5 07:25:22 localhost gconfd (cjp-6618): Beenden Apr 5 07:26:53 localhost shutdown[6768]: shutting down for system reboot Apr 5 07:27:03 localhost kernel: [4295682.180000] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) Apr 5 07:27:03 localhost kernel: [4295682.180000] apm: disabled on user request. Apr 5 07:27:06 localhost kernel: Kernel logging (proc) stopped. Apr 5 07:27:06 localhost kernel: Kernel log daemon terminating. Apr 5 07:27:06 localhost exiting on signal 15 Apr 5 07:28:10 localhost syslogd 1.4.1#17ubuntu5: restart. Apr 5 07:28:10 localhost kernel: Inspecting /boot/System.map-2.6.15-19-386 Apr 5 07:28:11 localhost kernel: Loaded 22973 symbols from /boot/System.map-2.6.15-19-386. Apr 5 07:28:11 localhost kernel: Symbols match kernel version 2.6.15. Apr 5 07:28:11 localhost kernel: No module symbols loaded - kernel modules not enabled. Apr 5 07:28:11 localhost kernel: [4294667.296000] Linux version 2.6.15-19-386 (buildd at rothera) (gcc version 4.0.3 (Ubuntu 4.0.3-1ubuntu3)) #1 PREEMPT Mon Mar 20 16:46:02 UTC 2006 Apr 5 07:28:11 localhost kernel: [4294667.296000] BIOS-provided physical RAM map: Apr 5 07:28:11 localhost kernel: [4294667.296000] BIOS-e820: 0000000000000000 - 000000000009e800 (usable) Apr 5 07:28:11 localhost kernel: [4294667.296000] BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved) Apr 5 07:28:11 localhost kernel: [4294667.296000] BIOS-e820: 00000000000c0000 - 00000000000cc000 (reserved) Apr 5 07:28:11 localhost kernel: [4294667.296000] BIOS-e820: 00000000000d8000 - 0000000000100000 (reserved) Apr 5 07:28:11 localhost kernel: [4294667.296000] BIOS-e820: 0000000000100000 - 000000000fcf0000 (usable) Apr 5 07:28:11 localhost kernel: [4294667.296000] BIOS-e820: 000000000fcf0000 - 000000000fcfc000 (ACPI data) Apr 5 07:28:11 localhost kernel: [4294667.296000] BIOS-e820: 000000000fcfc000 - 000000000fd00000 (ACPI NVS) Apr 5 07:28:11 localhost kernel: [4294667.296000] BIOS-e820: 000000000fd00000 - 000000000fe80000 (usable) Apr 5 07:28:11 localhost kernel: [4294667.296000] BIOS-e820: 000000000fe80000 - 0000000010000000 (reserved) Apr 5 07:28:11 localhost kernel: [4294667.296000] BIOS-e820: 00000000ff800000 - 00000000ffc00000 (reserved) Apr 5 07:28:11 localhost kernel: [4294667.296000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) Apr 5 07:28:11 localhost kernel: [4294667.296000] 0MB HIGHMEM available. Apr 5 07:28:11 localhost kernel: [4294667.296000] 254MB LOWMEM available. Apr 5 07:28:11 localhost kernel: [4294667.296000] DMI present. Apr 5 07:28:11 localhost kernel: [4294667.296000] ACPI: PM-Timer IO Port: 0x1008 Apr 5 07:28:11 localhost kernel: [4294667.296000] Allocating PCI resources starting at 20000000 (gap: 10000000:ef800000) Apr 5 07:28:11 localhost kernel: [4294667.296000] Built 1 zonelists Apr 5 07:28:11 localhost kernel: [4294667.296000] Kernel command line: root=/dev/hda3 ro quiet splash Apr 5 07:28:11 localhost kernel: [4294667.296000] Local APIC disabled by BIOS (or by default) -- you can enable it with "lapic" Apr 5 07:28:11 localhost kernel: [4294667.296000] Initializing CPU#0 Apr 5 07:28:11 localhost kernel: [4294667.296000] PID hash table entries: 1024 (order: 10, 16384 bytes) Apr 5 07:28:11 localhost kernel: [4294667.296000] Detected 795.184 MHz processor. Apr 5 07:28:11 localhost kernel: [4294667.296000] Using pmtmr for high-res timesource Apr 5 07:28:11 localhost kernel: [4294667.296000] Console: colour VGA+ 80x25 Apr 5 07:28:11 localhost kernel: [4294667.425000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) Apr 5 07:28:11 localhost kernel: [4294667.426000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) Apr 5 07:28:11 localhost kernel: [4294667.448000] Memory: 248108k/260608k available (1971k kernel code, 11920k reserved, 599k data, 288k init, 0k highmem) Apr 5 07:28:11 localhost kernel: [4294667.448000] Checking if this processor honours the WP bit even in supervisor mode... Ok. Apr 5 07:28:11 localhost kernel: [4294667.508000] Calibrating delay using timer specific routine.. 1625.33 BogoMIPS (lpj=812665) Apr 5 07:28:11 localhost kernel: [4294667.508000] Security Framework v1.0.0 initialized Apr 5 07:28:11 localhost kernel: [4294667.508000] SELinux: Disabled at boot. Apr 5 07:28:11 localhost kernel: [4294667.508000] Mount-cache hash table entries: 512 Apr 5 07:28:11 localhost kernel: [4294667.508000] CPU: L1 I cache: 16K, L1 D cache: 16K Apr 5 07:28:11 localhost kernel: [4294667.508000] CPU: L2 cache: 512K Apr 5 07:28:11 localhost kernel: [4294667.508000] mtrr: v2.0 (20020519) Apr 5 07:28:11 localhost kernel: [4294667.508000] CPU: Intel(R) Pentium(R) III Mobile CPU 800MHz stepping 01 Apr 5 07:28:11 localhost kernel: [4294667.508000] Enabling fast FPU save and restore... done. Apr 5 07:28:11 localhost kernel: [4294667.508000] Enabling unmasked SIMD FPU exception support... done. Apr 5 07:28:11 localhost kernel: [4294667.508000] Checking 'hlt' instruction... OK. Apr 5 07:28:11 localhost kernel: [4294667.512000] checking if image is initramfs... it is Apr 5 07:28:11 localhost kernel: [4294669.482000] Freeing initrd memory: 6381k freed Apr 5 07:28:11 localhost kernel: [4294669.519000] ACPI: Looking for DSDT ... not found! Apr 5 07:28:11 localhost kernel: [4294669.528000] NET: Registered protocol family 16 Apr 5 07:28:11 localhost kernel: [4294669.528000] EISA bus registered Apr 5 07:28:11 localhost kernel: [4294669.528000] ACPI: bus type pci registered Apr 5 07:28:11 localhost kernel: [4294669.529000] PCI: PCI BIOS revision 2.10 entry at 0xfd9b0, last bus=1 Apr 5 07:28:11 localhost kernel: [4294669.529000] PCI: Using configuration type 1 Apr 5 07:28:11 localhost kernel: [4294669.530000] ACPI: Subsystem revision 20051216 Apr 5 07:28:11 localhost kernel: [4294669.536000] ACPI: Interpreter enabled Apr 5 07:28:11 localhost kernel: [4294669.536000] ACPI: Using PIC for interrupt routing Apr 5 07:28:11 localhost kernel: [4294669.536000] ACPI: PCI Root Bridge [PCI0] (0000:00) Apr 5 07:28:11 localhost kernel: [4294669.544000] PCI quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO Apr 5 07:28:11 localhost kernel: [4294669.544000] PCI quirk: region 1180-11bf claimed by ICH4 GPIO Apr 5 07:28:11 localhost kernel: [4294669.544000] PCI: Transparent bridge - 0000:00:1e.0 Apr 5 07:28:11 localhost kernel: [4294669.552000] ACPI: Embedded Controller [EC0] (gpe 28) interrupt mode. Apr 5 07:28:11 localhost kernel: [4294669.557000] ACPI: PCI Interrupt Link [LNKA] (IRQs *9) Apr 5 07:28:11 localhost kernel: [4294669.558000] ACPI: PCI Interrupt Link [LNKB] (IRQs *9) Apr 5 07:28:11 localhost kernel: [4294669.559000] ACPI: PCI Interrupt Link [LNKC] (IRQs 9) *0 Apr 5 07:28:11 localhost kernel: [4294669.559000] ACPI: PCI Interrupt Link [LNKD] (IRQs *9) Apr 5 07:28:11 localhost kernel: [4294669.560000] ACPI: PCI Interrupt Link [LNKE] (IRQs *9) Apr 5 07:28:11 localhost kernel: [4294669.560000] ACPI: PCI Interrupt Link [LNKF] (IRQs 9) *0, disabled. Apr 5 07:28:11 localhost kernel: [4294669.561000] ACPI: PCI Interrupt Link [LNKG] (IRQs 9) *0, disabled. Apr 5 07:28:11 localhost kernel: [4294669.562000] ACPI: PCI Interrupt Link [LNKH] (IRQs *9) Apr 5 07:28:11 localhost kernel: [4294669.562000] Linux Plug and Play Support v0.97 (c) Adam Belay Apr 5 07:28:11 localhost kernel: [4294669.562000] pnp: PnP ACPI init Apr 5 07:28:11 localhost kernel: [4294669.562000] pnp: PnPACPI: unknown resource type 7 Apr 5 07:28:11 localhost kernel: [4294669.562000] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0c02 Apr 5 07:28:11 localhost kernel: [4294669.563000] pnp: PnPACPI: unknown resource type 7 Apr 5 07:28:11 localhost kernel: [4294669.563000] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0c02 Apr 5 07:28:11 localhost kernel: [4294669.563000] pnp: PnPACPI: unknown resource type 7 Apr 5 07:28:11 localhost kernel: [4294669.563000] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0200 Apr 5 07:28:11 localhost kernel: [4294669.563000] pnp: PnPACPI: unknown resource type 7 Apr 5 07:28:11 localhost kernel: [4294669.563000] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0c04 Apr 5 07:28:11 localhost kernel: [4294669.563000] pnp: PnPACPI: unknown resource type 7 Apr 5 07:28:11 localhost kernel: [4294669.563000] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0b00 Apr 5 07:28:11 localhost kernel: [4294669.563000] pnp: PnPACPI: unknown resource type 7 Apr 5 07:28:11 localhost kernel: [4294669.563000] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0800 Apr 5 07:28:11 localhost kernel: [4294669.563000] pnp: PnPACPI: unknown resource type 7 Apr 5 07:28:11 localhost kernel: [4294669.563000] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0303 Apr 5 07:28:11 localhost kernel: [4294669.564000] pnp: PnPACPI: unknown resource type 7 Apr 5 07:28:11 localhost kernel: [4294669.564000] pnp: PnPACPI: METHOD_NAME__CRS failure for SNY9002 Apr 5 07:28:11 localhost kernel: [4294669.565000] pnp: PnPACPI: unknown resource type 7 Apr 5 07:28:11 localhost kernel: [4294669.565000] pnp: PnPACPI: METHOD_NAME__PRS failure for SNY6001 Apr 5 07:28:11 localhost kernel: [4294669.566000] pnp: PnP ACPI: found 1 devices Apr 5 07:28:11 localhost kernel: [4294669.566000] PnPBIOS: Disabled by ACPI PNP Apr 5 07:28:11 localhost kernel: [4294669.566000] PCI: Using ACPI for IRQ routing Apr 5 07:28:11 localhost kernel: [4294669.566000] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report Apr 5 07:28:11 localhost kernel: [4294669.572000] PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0 Apr 5 07:28:11 localhost kernel: [4294669.572000] PCI: Bus 2, cardbus bridge: 0000:01:02.0 Apr 5 07:28:11 localhost kernel: [4294669.572000] IO window: 00003400-000034ff Apr 5 07:28:11 localhost kernel: [4294669.572000] IO window: 00003800-000038ff Apr 5 07:28:11 localhost kernel: [4294669.572000] PREFETCH window: 20000000-21ffffff Apr 5 07:28:11 localhost kernel: [4294669.572000] MEM window: 24000000-25ffffff Apr 5 07:28:11 localhost kernel: [4294669.572000] PCI: Bus 6, cardbus bridge: 0000:01:05.0 Apr 5 07:28:11 localhost kernel: [4294669.572000] IO window: 00003c00-00003cff Apr 5 07:28:11 localhost kernel: [4294669.572000] IO window: 00001400-000014ff Apr 5 07:28:11 localhost kernel: [4294669.572000] PREFETCH window: 22000000-23ffffff Apr 5 07:28:11 localhost kernel: [4294669.572000] MEM window: 26000000-27ffffff Apr 5 07:28:11 localhost kernel: [4294669.572000] PCI: Bridge: 0000:00:1e.0 Apr 5 07:28:11 localhost kernel: [4294669.572000] IO window: 3000-3fff Apr 5 07:28:11 localhost kernel: [4294669.572000] MEM window: f4100000-f41fffff Apr 5 07:28:11 localhost kernel: [4294669.572000] PREFETCH window: 20000000-23ffffff Apr 5 07:28:11 localhost kernel: [4294669.572000] **** SET: Misaligned resource pointer: cf79d5e2 Type 07 Len 0 Apr 5 07:28:11 localhost kernel: [4294669.572000] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 9 Apr 5 07:28:11 localhost kernel: [4294669.572000] PCI: setting IRQ 9 as level-triggered Apr 5 07:28:11 localhost kernel: [4294669.572000] ACPI: PCI Interrupt 0000:01:02.0[A] -> Link [LNKC] -> GSI 9 (level, low) -> IRQ 9 Apr 5 07:28:11 localhost kernel: [4294669.572000] PCI: Enabling device 0000:01:05.0 (0000 -> 0003) Apr 5 07:28:11 localhost kernel: [4294669.572000] **** SET: Misaligned resource pointer: cf79d5e2 Type 07 Len 0 Apr 5 07:28:11 localhost kernel: [4294669.573000] ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 9 Apr 5 07:28:11 localhost kernel: [4294669.573000] ACPI: PCI Interrupt 0000:01:05.0[A] -> Link [LNKF] -> GSI 9 (level, low) -> IRQ 9 Apr 5 07:28:11 localhost kernel: [4294669.573000] Simple Boot Flag at 0x36 set to 0x1 Apr 5 07:28:11 localhost kernel: [4294669.574000] audit: initializing netlink socket (disabled) Apr 5 07:28:11 localhost kernel: [4294669.574000] audit(1144222054.573:1): initialized Apr 5 07:28:11 localhost kernel: [4294669.574000] VFS: Disk quotas dquot_6.5.1 Apr 5 07:28:11 localhost kernel: [4294669.574000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Apr 5 07:28:11 localhost kernel: [4294669.574000] Initializing Cryptographic API Apr 5 07:28:11 localhost kernel: [4294669.574000] io scheduler noop registered Apr 5 07:28:11 localhost kernel: [4294669.574000] io scheduler anticipatory registered Apr 5 07:28:11 localhost kernel: [4294669.574000] io scheduler deadline registered Apr 5 07:28:11 localhost kernel: [4294669.574000] io scheduler cfq registered Apr 5 07:28:11 localhost kernel: [4294669.575000] isapnp: Scanning for PnP cards... Apr 5 07:28:11 localhost kernel: [4294669.940000] isapnp: No Plug & Play device found Apr 5 07:28:11 localhost kernel: [4294669.973000] PNP: No PS/2 controller found. Probing ports directly. Apr 5 07:28:11 localhost kernel: [4294669.975000] serio: i8042 AUX port at 0x60,0x64 irq 12 Apr 5 07:28:11 localhost kernel: [4294669.975000] serio: i8042 KBD port at 0x60,0x64 irq 1 Apr 5 07:28:11 localhost kernel: [4294669.975000] Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled Apr 5 07:28:11 localhost kernel: [4294669.980000] **** SET: Misaligned resource pointer: cea75222 Type 07 Len 0 Apr 5 07:28:11 localhost kernel: [4294669.981000] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 9 Apr 5 07:28:11 localhost kernel: [4294669.981000] ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 9 (level, low) -> IRQ 9 Apr 5 07:28:11 localhost kernel: [4294669.981000] ACPI: PCI interrupt for device 0000:00:1f.6 disabled Apr 5 07:28:11 localhost kernel: [4294669.982000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize Apr 5 07:28:11 localhost kernel: [4294669.982000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 Apr 5 07:28:11 localhost kernel: [4294669.982000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx Apr 5 07:28:11 localhost kernel: [4294669.982000] ACPI: bus type ide registered Apr 5 07:28:11 localhost kernel: [4294669.982000] mice: PS/2 mouse device common for all mice Apr 5 07:28:11 localhost kernel: [4294669.983000] EISA: Probing bus 0 at eisa.0 Apr 5 07:28:11 localhost kernel: [4294669.983000] Cannot allocate resource for EISA slot 1 Apr 5 07:28:11 localhost kernel: [4294669.983000] Cannot allocate resource for EISA slot 2 Apr 5 07:28:11 localhost kernel: [4294669.983000] Cannot allocate resource for EISA slot 3 Apr 5 07:28:11 localhost kernel: [4294669.983000] EISA: Detected 0 cards. Apr 5 07:28:11 localhost kernel: [4294669.983000] NET: Registered protocol family 2 Apr 5 07:28:11 localhost kernel: [4294669.993000] IP route cache hash table entries: 2048 (order: 1, 8192 bytes) Apr 5 07:28:11 localhost kernel: [4294669.993000] TCP established hash table entries: 8192 (order: 3, 32768 bytes) Apr 5 07:28:11 localhost kernel: [4294669.993000] TCP bind hash table entries: 8192 (order: 3, 32768 bytes) Apr 5 07:28:11 localhost kernel: [4294669.993000] TCP: Hash tables configured (established 8192 bind 8192) Apr 5 07:28:11 localhost kernel: [4294669.993000] TCP reno registered Apr 5 07:28:11 localhost kernel: [4294669.994000] TCP bic registered Apr 5 07:28:11 localhost kernel: [4294669.994000] NET: Registered protocol family 1 Apr 5 07:28:11 localhost kernel: [4294669.994000] NET: Registered protocol family 8 Apr 5 07:28:11 localhost kernel: [4294669.994000] NET: Registered protocol family 20 Apr 5 07:28:11 localhost kernel: [4294669.994000] Using IPI Shortcut mode Apr 5 07:28:11 localhost kernel: [4294669.994000] ACPI wakeup devices: Apr 5 07:28:11 localhost kernel: [4294669.994000] PWRB LAN EC0 USB1 USB2 MODE Apr 5 07:28:11 localhost kernel: [4294669.994000] ACPI: (supports S0 S3 S4 S5) Apr 5 07:28:11 localhost kernel: [4294669.994000] Freeing unused kernel memory: 288k freed Apr 5 07:28:11 localhost kernel: [4294670.013000] input: AT Translated Set 2 keyboard as /class/input/input0 Apr 5 07:28:11 localhost kernel: [4294670.155000] vga16fb: mapped to 0xc00a0000 Apr 5 07:28:11 localhost kernel: [4294670.270000] Console: switching to colour frame buffer device 80x25 Apr 5 07:28:11 localhost kernel: [4294670.270000] fb0: VGA16 VGA frame buffer device Apr 5 07:28:11 localhost kernel: [4294671.391000] Real Time Clock Driver v1.12 Apr 5 07:28:11 localhost kernel: [4294671.402000] Capability LSM initialized Apr 5 07:28:11 localhost kernel: [4294671.472000] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) Apr 5 07:28:11 localhost kernel: [4294671.472000] ACPI: Processor [CPU0] (supports 8 throttling states) Apr 5 07:28:11 localhost kernel: [4294671.478000] ACPI: Thermal Zone [ATF0] (60 C) Apr 5 07:28:11 localhost kernel: [4294672.280000] ICH2M: IDE controller at PCI slot 0000:00:1f.1 Apr 5 07:28:11 localhost kernel: [4294672.280000] ICH2M: chipset revision 3 Apr 5 07:28:11 localhost kernel: [4294672.280000] ICH2M: not 100%% native mode: will probe irqs later Apr 5 07:28:11 localhost kernel: [4294672.280000] ide0: BM-DMA at 0x1800-0x1807, BIOS settings: hda:DMA, hdb:pio Apr 5 07:28:11 localhost kernel: [4294672.749000] hda: SAMSUNG MP0804H, ATA DISK drive Apr 5 07:28:11 localhost kernel: [4294673.361000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Apr 5 07:28:11 localhost kernel: [4294673.375000] hda: max request size: 1024KiB Apr 5 07:28:11 localhost kernel: [4294673.821000] hda: 156368016 sectors (80060 MB) w/8192KiB Cache, CHS=16383/255/63, UDMA(100) Apr 5 07:28:11 localhost kernel: [4294673.822000] hda: cache flushes supported Apr 5 07:28:11 localhost kernel: [4294673.822000] hda: hda1 hda2 hda3 hda4 < hda5 > Apr 5 07:28:11 localhost kernel: [4294674.325000] usbcore: registered new driver usbfs Apr 5 07:28:11 localhost kernel: [4294674.325000] usbcore: registered new driver hub Apr 5 07:28:11 localhost kernel: [4294674.330000] USB Universal Host Controller Interface driver v2.3 Apr 5 07:28:11 localhost kernel: [4294674.330000] **** SET: Misaligned resource pointer: ceac67e2 Type 07 Len 0 Apr 5 07:28:11 localhost kernel: [4294674.331000] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 9 Apr 5 07:28:11 localhost kernel: [4294674.331000] ACPI: PCI Interrupt 0000:00:1f.2[D] -> Link [LNKD] -> GSI 9 (level, low) -> IRQ 9 Apr 5 07:28:11 localhost kernel: [4294674.331000] uhci_hcd 0000:00:1f.2: UHCI Host Controller Apr 5 07:28:11 localhost kernel: [4294674.332000] uhci_hcd 0000:00:1f.2: new USB bus registered, assigned bus number 1 Apr 5 07:28:11 localhost kernel: [4294674.332000] uhci_hcd 0000:00:1f.2: irq 9, io base 0x00001820 Apr 5 07:28:11 localhost kernel: [4294674.333000] hub 1-0:1.0: USB hub found Apr 5 07:28:11 localhost kernel: [4294674.333000] hub 1-0:1.0: 2 ports detected Apr 5 07:28:11 localhost kernel: [4294674.434000] **** SET: Misaligned resource pointer: ceac64e2 Type 07 Len 0 Apr 5 07:28:11 localhost kernel: [4294674.435000] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 9 Apr 5 07:28:11 localhost kernel: [4294674.435000] ACPI: PCI Interrupt 0000:00:1f.4[C] -> Link [LNKH] -> GSI 9 (level, low) -> IRQ 9 Apr 5 07:28:11 localhost kernel: [4294674.435000] uhci_hcd 0000:00:1f.4: UHCI Host Controller Apr 5 07:28:11 localhost kernel: [4294674.435000] uhci_hcd 0000:00:1f.4: new USB bus registered, assigned bus number 2 Apr 5 07:28:11 localhost kernel: [4294674.435000] uhci_hcd 0000:00:1f.4: irq 9, io base 0x00002400 Apr 5 07:28:11 localhost kernel: [4294674.435000] hub 2-0:1.0: USB hub found Apr 5 07:28:11 localhost kernel: [4294674.435000] hub 2-0:1.0: 2 ports detected Apr 5 07:28:11 localhost kernel: [4294674.640000] usb 1-1: new low speed USB device using uhci_hcd and address 2 Apr 5 07:28:11 localhost kernel: [4294675.025000] usb 2-1: new full speed USB device using uhci_hcd and address 2 Apr 5 07:28:11 localhost kernel: [4294675.185000] SCSI subsystem initialized Apr 5 07:28:11 localhost kernel: [4294675.191000] Initializing USB Mass Storage driver... Apr 5 07:28:11 localhost kernel: [4294675.362000] usb 2-2: new full speed USB device using uhci_hcd and address 3 Apr 5 07:28:11 localhost kernel: [4294675.580000] usbcore: registered new driver hiddev Apr 5 07:28:11 localhost kernel: [4294675.581000] scsi0 : SCSI emulation for USB Mass Storage devices Apr 5 07:28:11 localhost kernel: [4294675.582000] usbcore: registered new driver usb-storage Apr 5 07:28:11 localhost kernel: [4294675.582000] USB Mass Storage support registered. Apr 5 07:28:11 localhost kernel: [4294675.606000] input: JPC JPC USB MOUSE as /class/input/input1 Apr 5 07:28:11 localhost kernel: [4294675.606000] input: USB HID v1.00 Mouse [JPC JPC USB MOUSE] on usb-0000:00:1f.2-1 Apr 5 07:28:11 localhost kernel: [4294675.606000] usbcore: registered new driver usbhid Apr 5 07:28:11 localhost kernel: [4294675.606000] drivers/usb/input/hid-core.c: v2.6:USB HID core driver Apr 5 07:28:11 localhost kernel: [4294675.825000] Attempting manual resume Apr 5 07:28:11 localhost kernel: [4294675.870000] EXT3-fs: mounted filesystem with ordered data mode. Apr 5 07:28:11 localhost kernel: [4294675.873000] kjournald starting. Commit interval 5 seconds Apr 5 07:28:11 localhost kernel: [4294680.584000] Vendor: Sony Model: MSC-U03 Rev: 1.00 Apr 5 07:28:11 localhost kernel: [4294680.584000] Type: Direct-Access ANSI SCSI revision: 00 Apr 5 07:28:11 localhost kernel: [4294687.844000] SCSI device sda: 253696 512-byte hdwr sectors (130 MB) Apr 5 07:28:11 localhost kernel: [4294687.846000] sda: Write Protect is off Apr 5 07:28:11 localhost kernel: [4294687.913000] SCSI device sda: 253696 512-byte hdwr sectors (130 MB) Apr 5 07:28:11 localhost kernel: [4294687.918000] sda: Write Protect is off Apr 5 07:28:11 localhost kernel: [4294687.918000] sda: sda1 Apr 5 07:28:11 localhost kernel: [4294687.930000] sd 0:0:0:0: Attached scsi removable disk sda Apr 5 07:28:11 localhost kernel: [4294687.962000] sd 0:0:0:0: Attached scsi generic sg0 type 0 Apr 5 07:28:11 localhost kernel: [4294688.457000] ts: Compaq touchscreen protocol output Apr 5 07:28:11 localhost kernel: [4294691.577000] Linux agpgart interface v0.101 (c) Dave Jones Apr 5 07:28:11 localhost kernel: [4294691.661000] agpgart: Detected an Intel i815 Chipset. Apr 5 07:28:11 localhost kernel: [4294691.699000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 Apr 5 07:28:11 localhost kernel: [4294691.934000] agpgart: AGP aperture is 64M @ 0xf8000000 Apr 5 07:28:11 localhost kernel: [4294691.934000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 Apr 5 07:28:11 localhost kernel: [4294691.958000] i810_smbus 0000:00:02.0: i810/i815 i2c device found. Apr 5 07:28:11 localhost kernel: [4294692.759000] ohci1394: $Rev: 1313 $ Ben Collins Apr 5 07:28:11 localhost kernel: [4294692.759000] **** SET: Misaligned resource pointer: cb7f7aa2 Type 07 Len 0 Apr 5 07:28:11 localhost kernel: [4294692.762000] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 9 Apr 5 07:28:11 localhost kernel: [4294692.762000] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 9 (level, low) -> IRQ 9 Apr 5 07:28:11 localhost kernel: [4294692.828000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[9] MMIO=[f4101000-f41017ff] Max Packet=[2048] Apr 5 07:28:11 localhost kernel: [4294692.894000] Bluetooth: Core ver 2.8 Apr 5 07:28:11 localhost kernel: [4294692.894000] NET: Registered protocol family 31 Apr 5 07:28:11 localhost kernel: [4294692.894000] Bluetooth: HCI device and connection manager initialized Apr 5 07:28:11 localhost kernel: [4294692.894000] Bluetooth: HCI socket layer initialized Apr 5 07:28:11 localhost kernel: [4294692.920000] ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 9 (level, low) -> IRQ 9 Apr 5 07:28:11 localhost kernel: [4294692.967000] Bluetooth: HCI USB driver ver 2.9 Apr 5 07:28:11 localhost kernel: [4294692.969000] usbcore: registered new driver hci_usb Apr 5 07:28:11 localhost kernel: [4294693.177000] input: PS/2 Mouse as /class/input/input2 Apr 5 07:28:11 localhost kernel: [4294693.194000] input: AlpsPS/2 ALPS GlidePoint as /class/input/input3 Apr 5 07:28:11 localhost kernel: [4294693.479000] intel8x0_measure_ac97_clock: measured 50314 usecs Apr 5 07:28:11 localhost kernel: [4294693.479000] intel8x0: clocking to 48000 Apr 5 07:28:11 localhost kernel: [4294693.967000] ACPI: PCI Interrupt 0000:01:02.0[A] -> Link [LNKC] -> GSI 9 (level, low) -> IRQ 9 Apr 5 07:28:11 localhost kernel: [4294693.967000] Yenta: CardBus bridge found at 0000:01:02.0 [104d:80f2] Apr 5 07:28:11 localhost kernel: [4294694.089000] Yenta: ISA IRQ mask 0x0cb8, PCI irq 9 Apr 5 07:28:11 localhost kernel: [4294694.089000] Socket status: 30000006 Apr 5 07:28:11 localhost kernel: [4294694.089000] pcmcia: parent PCI bridge I/O window: 0x3000 - 0x3fff Apr 5 07:28:11 localhost kernel: [4294694.089000] cs: IO port probe 0x3000-0x3fff: clean. Apr 5 07:28:11 localhost kernel: [4294694.090000] pcmcia: parent PCI bridge Memory window: 0xf4100000 - 0xf41fffff Apr 5 07:28:11 localhost kernel: [4294694.090000] pcmcia: parent PCI bridge Memory window: 0x20000000 - 0x23ffffff Apr 5 07:28:11 localhost kernel: [4294694.257000] ACPI: PCI Interrupt 0000:01:05.0[A] -> Link [LNKF] -> GSI 9 (level, low) -> IRQ 9 Apr 5 07:28:11 localhost kernel: [4294694.257000] Yenta: CardBus bridge found at 0000:01:05.0 [12a3:ab01] Apr 5 07:28:11 localhost kernel: [4294694.257000] Yenta: Enabling burst memory read transactions Apr 5 07:28:11 localhost kernel: [4294694.257000] Yenta: Using CSCINT to route CSC interrupts to PCI Apr 5 07:28:11 localhost kernel: [4294694.257000] Yenta: Routing CardBus interrupts to PCI Apr 5 07:28:11 localhost kernel: [4294694.257000] Yenta TI: socket 0000:01:05.0, mfunc 0x01000002, devctl 0x60 Apr 5 07:28:11 localhost kernel: [4294694.368000] e100: Intel(R) PRO/100 Network Driver, 3.4.14-k4-NAPI Apr 5 07:28:11 localhost kernel: [4294694.368000] e100: Copyright(c) 1999-2005 Intel Corporation Apr 5 07:28:11 localhost kernel: [4294694.480000] Yenta: ISA IRQ mask 0x0000, PCI irq 9 Apr 5 07:28:11 localhost kernel: [4294694.480000] Socket status: 30000011 Apr 5 07:28:11 localhost kernel: [4294694.480000] pcmcia: parent PCI bridge I/O window: 0x3000 - 0x3fff Apr 5 07:28:11 localhost kernel: [4294694.480000] cs: IO port probe 0x3000-0x3fff: clean. Apr 5 07:28:11 localhost kernel: [4294694.481000] pcmcia: parent PCI bridge Memory window: 0xf4100000 - 0xf41fffff Apr 5 07:28:11 localhost kernel: [4294694.481000] pcmcia: parent PCI bridge Memory window: 0x20000000 - 0x23ffffff Apr 5 07:28:11 localhost kernel: [4294694.495000] **** SET: Misaligned resource pointer: cab0bde2 Type 07 Len 0 Apr 5 07:28:11 localhost kernel: [4294694.495000] ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 9 Apr 5 07:28:11 localhost kernel: [4294694.495000] ACPI: PCI Interrupt 0000:01:08.0[A] -> Link [LNKE] -> GSI 9 (level, low) -> IRQ 9 Apr 5 07:28:11 localhost kernel: [4294694.521000] e100: eth0: e100_probe: addr 0xf4100000, irq 9, MAC addr 08:00:46:54:1D:75 Apr 5 07:28:11 localhost kernel: [4294695.209000] pccard: PCMCIA card inserted into slot 1 Apr 5 07:28:11 localhost kernel: [4294695.209000] cs: memory probe 0xf4100000-0xf41fffff: excluding 0xf4100000-0xf410ffff Apr 5 07:28:11 localhost kernel: [4294695.217000] pcmcia: registering new device pcmcia1.0 Apr 5 07:28:11 localhost kernel: [4294695.368000] cs: IO port probe 0x100-0x3af: clean. Apr 5 07:28:11 localhost kernel: [4294695.370000] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7 Apr 5 07:28:11 localhost kernel: [4294695.370000] cs: IO port probe 0x820-0x8ff: clean. Apr 5 07:28:11 localhost kernel: [4294695.371000] cs: IO port probe 0xc00-0xcf7: clean. Apr 5 07:28:11 localhost kernel: [4294695.372000] cs: IO port probe 0xa00-0xaff: clean. Apr 5 07:28:11 localhost kernel: [4294695.426000] cs: IO port probe 0x100-0x3af: clean. Apr 5 07:28:11 localhost kernel: [4294695.428000] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7 Apr 5 07:28:11 localhost kernel: [4294695.429000] cs: IO port probe 0x820-0x8ff: clean. Apr 5 07:28:11 localhost kernel: [4294695.429000] cs: IO port probe 0xc00-0xcf7: clean. Apr 5 07:28:11 localhost kernel: [4294695.430000] cs: IO port probe 0xa00-0xaff: clean. Apr 5 07:28:11 localhost kernel: [4294695.618000] hostap_cs: 0.4.4-kernel (Jouni Malinen ) Apr 5 07:28:11 localhost kernel: [4294696.112000] lp: driver loaded but no devices found Apr 5 07:28:11 localhost kernel: [4294696.167000] eth1: New link status: Connected (0001) Apr 5 07:28:11 localhost kernel: [4294696.191000] sbp2: $Rev: 1306 $ Ben Collins Apr 5 07:28:11 localhost kernel: [4294696.191000] ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1) Apr 5 07:28:11 localhost kernel: [4294696.191000] ieee1394: sbp2: Try serialize_io=0 for better performance Apr 5 07:28:11 localhost kernel: [4294696.342000] Adding 698788k swap on /dev/hda5. Priority:-1 extents:1 across:698788k Apr 5 07:28:11 localhost kernel: [4294696.483000] EXT3 FS on hda3, internal journal Apr 5 07:28:11 localhost kernel: [4294696.733000] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 Apr 5 07:28:11 localhost kernel: [4294696.733000] md: bitmap version 4.39 Apr 5 07:28:11 localhost kernel: [4294697.361000] NET: Registered protocol family 17 Apr 5 07:28:11 localhost kernel: [4294697.612000] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel at redhat.com Apr 5 07:28:11 localhost kernel: [4294699.539000] NTFS driver 2.1.25 [Flags: R/O MODULE]. Apr 5 07:28:11 localhost kernel: [4294699.611000] NTFS volume version 3.1. Apr 5 07:28:11 localhost kernel: [4294699.645000] NTFS volume version 3.1. Apr 5 07:28:11 localhost kernel: [4294701.457000] NET: Registered protocol family 10 Apr 5 07:28:11 localhost kernel: [4294701.457000] lo: Disabled Privacy Extensions Apr 5 07:28:11 localhost kernel: [4294701.458000] IPv6 over IPv4 tunneling driver Apr 5 07:28:11 localhost kernel: [4294704.574000] ACPI: AC Adapter [ACAD] (on-line) Apr 5 07:28:11 localhost kernel: [4294704.583000] ACPI: Battery Slot [BAT1] (battery present) Apr 5 07:28:11 localhost kernel: [4294704.753000] ACPI: Lid Switch [LID] Apr 5 07:28:11 localhost kernel: [4294704.753000] ACPI: Power Button (CM) [PWRB] Apr 5 07:28:11 localhost kernel: [4294705.075000] ACPI Sony Notebook Control Driver v0.2 successfully installed Apr 5 07:28:11 localhost kernel: [4294705.227000] ACPI: Video Device [GCH0] (multi-head: yes rom: yes post: no) Apr 5 07:28:21 localhost hpiod: 0.9.6 accepting connections at 4671... Apr 5 07:28:22 localhost kernel: [4294718.296000] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) Apr 5 07:28:22 localhost kernel: [4294718.296000] apm: overridden by ACPI. Apr 5 07:28:23 localhost kernel: [4294718.709000] input: Sony Vaio Jogdial as /class/input/input4 Apr 5 07:28:23 localhost kernel: [4294718.710000] input: Sony Vaio Keys as /class/input/input5 Apr 5 07:28:23 localhost kernel: [4294719.067000] sonypi: Sony Programmable I/O Controller Driverv1.26. Apr 5 07:28:23 localhost kernel: [4294719.067000] sonypi: detected type2 model, verbose = 0, fnkeyinit = off, camera = off, compat = off, mask = 0xffffffff, useinput = on, acpi = on Apr 5 07:28:23 localhost kernel: [4294719.067000] sonypi: enabled at irq=11, port1=0x1080, port2=0x1084 Apr 5 07:28:23 localhost kernel: [4294719.067000] sonypi: device allocated minor is 61 Apr 5 07:28:26 localhost kernel: [4294722.376000] Bluetooth: L2CAP ver 2.8 Apr 5 07:28:26 localhost kernel: [4294722.376000] Bluetooth: L2CAP socket layer initialized Apr 5 07:28:27 localhost kernel: [4294722.575000] Bluetooth: RFCOMM socket layer initialized Apr 5 07:28:27 localhost kernel: [4294722.575000] Bluetooth: RFCOMM TTY layer initialized Apr 5 07:28:27 localhost kernel: [4294722.575000] Bluetooth: RFCOMM ver 1.7 Apr 5 07:28:38 localhost gconfd (cjp-4999): (Version 2.14.0) wird gestartet, Prozesskennung 4999, Benutzer »cjp« Apr 5 07:28:38 localhost gconfd (cjp-4999): Die Adresse »xml:readonly:/etc/gconf/gconf.xml.mandatory« wurde an der Position 0 zu einer nur lesbaren Konfigurationsquelle aufgelöst Apr 5 07:28:38 localhost gconfd (cjp-4999): Die Adresse »xml:readwrite:/home/cjp/.gconf« wurde an der Position 1 zu einer schreibbaren Konfigurationsquelle aufgelöst Apr 5 07:28:38 localhost gconfd (cjp-4999): Die Adresse »xml:readonly:/etc/gconf/gconf.xml.defaults« wurde an der Position 2 zu einer nur lesbaren Konfigurationsquelle aufgelöst Apr 5 07:28:38 localhost gconfd (cjp-4999): Die Adresse »xml:readonly:/var/lib/gconf/debian.defaults« wurde an der Position 3 zu einer nur lesbaren Konfigurationsquelle aufgelöst Apr 5 07:28:38 localhost gconfd (cjp-4999): Die Adresse »xml:readonly:/var/lib/gconf/defaults« wurde an der Position 4 zu einer nur lesbaren Konfigurationsquelle aufgelöst Apr 5 07:28:45 localhost gconfd (cjp-4999): Die Adresse »xml:readwrite:/home/cjp/.gconf« wurde an der Position 0 zu einer schreibbaren Konfigurationsquelle aufgelöst Apr 5 07:29:28 localhost gconfd (root-5162): (Version 2.14.0) wird gestartet, Prozesskennung 5162, Benutzer »root« Apr 5 07:29:28 localhost gconfd (root-5162): Die Adresse »xml:readonly:/etc/gconf/gconf.xml.mandatory« wurde an der Position 0 zu einer nur lesbaren Konfigurationsquelle aufgelöst Apr 5 07:29:28 localhost gconfd (root-5162): Die Adresse »xml:readwrite:/root/.gconf« wurde an der Position 1 zu einer schreibbaren Konfigurationsquelle aufgelöst Apr 5 07:29:28 localhost gconfd (root-5162): Die Adresse »xml:readonly:/etc/gconf/gconf.xml.defaults« wurde an der Position 2 zu einer nur lesbaren Konfigurationsquelle aufgelöst Apr 5 07:29:28 localhost gconfd (root-5162): Die Adresse »xml:readonly:/var/lib/gconf/debian.defaults« wurde an der Position 3 zu einer nur lesbaren Konfigurationsquelle aufgelöst Apr 5 07:29:28 localhost gconfd (root-5162): Die Adresse »xml:readonly:/var/lib/gconf/defaults« wurde an der Position 4 zu einer nur lesbaren Konfigurationsquelle aufgelöst Note: the original reporter indicated the bug was in package 'apm-sleep'; however, that package was not published in Ubuntu. -- Notebook (Sony Vaio PCG-SRX51P)does not recover from sleep mode https://launchpad.net/malone/bugs/38130 From casualprogrammer at yahoo.com Wed Apr 5 10:03:37 2006 From: casualprogrammer at yahoo.com (casualprogrammer) Date: Wed, 05 Apr 2006 10:03:37 -0000 Subject: [Bug 38130] Re: Notebook (Sony Vaio PCG-SRX51P)does not recover from sleep mode References: <20060405055506.25515.44310.malonedeb@gangotri.ubuntu.com> Message-ID: <20060405100338.25542.60839.malone@gangotri.ubuntu.com> linux-source-2.6.15 seems the best choice, since the sleep mode is probably built into the kernel. ** Changed in: Ubuntu Sourcepackagename: None => linux-source-2.6.15 -- Notebook (Sony Vaio PCG-SRX51P)does not recover from sleep mode https://launchpad.net/malone/bugs/38130 From ubuntu at paul.sladen.org Wed Apr 5 10:21:09 2006 From: ubuntu at paul.sladen.org (Paul Sladen) Date: Wed, 05 Apr 2006 10:21:09 -0000 Subject: [Bug 37132] Re: Fan non-stop on after long suspend - MSI S260 References: <20060329082822.7863.46602.malonedeb@gangotri.ubuntu.com> Message-ID: <20060405102110.25515.13179.malone@gangotri.ubuntu.com> Closing at request of the reporter. Please open again if it reoccurs. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Unconfirmed => Rejected -- Fan non-stop on after long suspend - MSI S260 https://launchpad.net/malone/bugs/37132 From ondrej at sury.org Wed Apr 5 10:29:35 2006 From: ondrej at sury.org (=?utf-8?b?T25kxZllaiBTdXLDvQ==?=) Date: Wed, 05 Apr 2006 10:29:35 -0000 Subject: [Bug 32519] Re: root disk not found when booting on Sony Vaio PGN-S3XP References: <20060222213438.15768.684.malonedeb@gandwana.ubuntu.com> Message-ID: <20060405102935.25542.86615.malone@gangotri.ubuntu.com> I will try to remove manual modules from /etc/mkinitramfs/modules, regenerate initramfs and reboot and we will see, meanwhile: root at ookami:~# cat /proc/cmdline root=/dev/sda1 ro quiet splash root at ookami:~# lspci 0000:00:00.0 Host bridge: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller (rev 03) 0000:00:01.0 PCI bridge: Intel Corporation Mobile 915GM/PM Express PCI Express Root Port (rev 03) 0000:00:1b.0 0403: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller (rev 03) 0000:00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 03) 0000:00:1d.1 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 03) 0000:00:1d.2 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 03) 0000:00:1d.3 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 (rev 03) 0000:00:1d.7 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 03) 0000:00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev d3) 0000:00:1f.0 ISA bridge: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge (rev 03) 0000:00:1f.1 IDE interface: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) IDE Controller (rev 03) 0000:00:1f.2 IDE interface: Intel Corporation 82801FBM (ICH6M) SATA Controller (rev 03) 0000:00:1f.3 SMBus: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller (rev 03) 0000:01:00.0 VGA compatible controller: nVidia Corporation GeForce Go 6200 TurboCache (rev a1) 0000:06:05.0 CardBus bridge: Texas Instruments PCI7420 CardBus Controller 0000:06:05.2 FireWire (IEEE 1394): Texas Instruments PCI7x20 1394a-2000 OHCI Two-Port PHY/Link-Layer Controller 0000:06:05.3 Mass storage controller: Texas Instruments PCI7420/PCI7620 Dual Socket CardBus and Smart Card Cont. w/ 1394a-2000 OHCI Two-Port PHY/Link-Layer Cont. an 0000:06:08.0 Ethernet controller: Intel Corporation 82562ET/EZ/GT/GZ - PRO/100 VE (LOM) Ethernet Controller Mobile (rev 03) 0000:06:0b.0 Network controller: Intel Corporation PRO/Wireless 2200BG (rev 05) root at ookami:~# lspci -n 0000:00:00.0 0600: 8086:2590 (rev 03) 0000:00:01.0 0604: 8086:2591 (rev 03) 0000:00:1b.0 0403: 8086:2668 (rev 03) 0000:00:1d.0 0c03: 8086:2658 (rev 03) 0000:00:1d.1 0c03: 8086:2659 (rev 03) 0000:00:1d.2 0c03: 8086:265a (rev 03) 0000:00:1d.3 0c03: 8086:265b (rev 03) 0000:00:1d.7 0c03: 8086:265c (rev 03) 0000:00:1e.0 0604: 8086:2448 (rev d3) 0000:00:1f.0 0601: 8086:2641 (rev 03) 0000:00:1f.1 0101: 8086:266f (rev 03) 0000:00:1f.2 0101: 8086:2653 (rev 03) 0000:00:1f.3 0c05: 8086:266a (rev 03) 0000:01:00.0 0300: 10de:0167 (rev a1) 0000:06:05.0 0607: 104c:ac8e 0000:06:05.2 0c00: 104c:802e 0000:06:05.3 0180: 104c:ac8f 0000:06:08.0 0200: 8086:1068 (rev 03) 0000:06:0b.0 0280: 8086:4220 (rev 05) root at ookami:~# -- root disk not found when booting on Sony Vaio PGN-S3XP https://launchpad.net/malone/bugs/32519 From ingbert.braun at gmx.de Wed Apr 5 10:24:20 2006 From: ingbert.braun at gmx.de (ingbraun) Date: Wed, 05 Apr 2006 10:24:20 -0000 Subject: [Bug 37120] Re: wpasupplicant doesn't work properly with rt2500 driver References: <20060329054652.7313.48354.malonedeb@gangotri.ubuntu.com> Message-ID: <20060405102420.14649.48831.malone@gandwana.ubuntu.com> >usually this means that wpasupplicant has detected that the AP in question does not provide WPA In fact, it does provide WPA. As I wrote, the same ap with the same wpa_supplicant.conf works fine with breezy and Fedora... -- wpasupplicant doesn't work properly with rt2500 driver https://launchpad.net/malone/bugs/37120 From ingbert.braun at gmx.de Wed Apr 5 10:28:38 2006 From: ingbert.braun at gmx.de (ingbraun) Date: Wed, 05 Apr 2006 10:28:38 -0000 Subject: [Bug 37120] Re: wpasupplicant doesn't work properly with rt2500 driver References: <20060329054652.7313.48354.malonedeb@gangotri.ubuntu.com> Message-ID: <20060405102839.14649.96553.malone@gandwana.ubuntu.com> >usually this means that wpasupplicant has detected that the AP in question does not provide WPA In fact, it does provide WPA. As I wrote, the same ap with the same wpa_supplicant.conf works fine with breezy and Fedora... -- wpasupplicant doesn't work properly with rt2500 driver https://launchpad.net/malone/bugs/37120 From ingbert.braun at gmx.de Wed Apr 5 10:50:56 2006 From: ingbert.braun at gmx.de (ingbraun) Date: Wed, 05 Apr 2006 10:50:56 -0000 Subject: [Bug 37120] Re: wpasupplicant doesn't work properly with rt2500 driver References: <20060329054652.7313.48354.malonedeb@gangotri.ubuntu.com> Message-ID: <20060405105056.25515.36442.malone@gangotri.ubuntu.com> >usually this means that wpasupplicant has detected that the AP in question does not provide WPA In fact, it does provide WPA. As I wrote, the same ap with the same wpa_supplicant.conf works fine with breezy and Fedora... -- wpasupplicant doesn't work properly with rt2500 driver https://launchpad.net/malone/bugs/37120 From ondrej at sury.org Wed Apr 5 10:55:05 2006 From: ondrej at sury.org (=?utf-8?b?T25kxZllaiBTdXLDvQ==?=) Date: Wed, 05 Apr 2006 10:55:05 -0000 Subject: [Bug 32519] Re: root disk not found when booting on Sony Vaio PGN-S3XP References: <20060222213438.15768.684.malonedeb@gandwana.ubuntu.com> Message-ID: <20060405105505.14649.86981.malone@gandwana.ubuntu.com> Looks like it boots fine with linux-image-2.6.15-19-686 2.6.15-19.29 ** Changed in: Ubuntu Status: Needs Info => Fix Released -- root disk not found when booting on Sony Vaio PGN-S3XP https://launchpad.net/malone/bugs/32519 From ingbert.braun at gmx.de Wed Apr 5 12:00:57 2006 From: ingbert.braun at gmx.de (ingbraun) Date: Wed, 05 Apr 2006 12:00:57 -0000 Subject: [Bug 37120] Re: wpasupplicant doesn't work properly with rt2500 driver References: <20060329054652.7313.48354.malonedeb@gangotri.ubuntu.com> Message-ID: <20060405120057.25515.73477.malone@gangotri.ubuntu.com> >usually this means that wpasupplicant has detected that the AP in question does not provide WPA In fact, it does provide WPA. As I wrote, the same ap with the same wpa_supplicant.conf works fine with breezy and Fedora... -- wpasupplicant doesn't work properly with rt2500 driver https://launchpad.net/malone/bugs/37120 From dominikowski at gmail.com Wed Apr 5 13:27:50 2006 From: dominikowski at gmail.com (Tomasz Dominikowski) Date: Wed, 05 Apr 2006 13:27:50 -0000 Subject: [Bug 38174] Power management doesn't work on N340S8 laptop. References: <20060405114042.14572.96835.malonedeb@gandwana.ubuntu.com> Message-ID: <20060405132750.14572.45637.launchpad@canonical@gandwana.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Wishlist Priority: (none set) Status: Confirmed Description: Whether acpi is the culprit I don't know. It worked in Breezy. Now, in fresh, fully dist-upgraded Dapper with default services running, things that don't work: - battery not detected by HAL (I've checked it in hal-device-manager) - when I close the lid, screen doesn't blank - Power button forcefully powers the computer down (instead of shutting the system down first) - when I shut the system down, it stops at "sending the TERM signal..." and the laptop doesn't power off. - of course sleep/hibernate doesn't work ( <- never tested these two things in breezy though) I've fondled around with the new power management (in gconf-editor too) after I discovered these flaws, but to no avail. It's an old laptop, SiS630S chipset. Celeron 800MHz. 320MB RAM. I can provide more details, logs when requested, because I have no idea what is failing and I'm not experienced in debugging, so if you want a debuglog/log please provide commands to obtain them. Thanks for bothering with this report! Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Wishlist Priority: (none set) Status: Confirmed Description: Whether acpi is the culprit I don't know. It worked in Breezy. Now, in fresh, fully dist-upgraded Dapper with default services running, things that don't work: - battery not detected by HAL (I've checked it in hal-device-manager) - when I close the lid, screen doesn't blank - Power button forcefully powers the computer down (instead of shutting the system down first) - when I shut the system down, it stops at "sending the TERM signal..." and the laptop doesn't power off. - of course sleep/hibernate doesn't work ( <- never tested these two things in breezy though) I've fondled around with the new power management (in gconf-editor too) after I discovered these flaws, but to no avail. It's an old laptop, SiS630S chipset. Celeron 800MHz. 320MB RAM. I can provide more details, logs when requested, because I have no idea what is failing and I'm not experienced in debugging, so if you want a debuglog/log please provide commands to obtain them. Thanks for bothering with this report! -- Power management doesn't work on N340S8 laptop. https://launchpad.net/malone/bugs/38174 From mjg59 at codon.org.uk Wed Apr 5 13:27:49 2006 From: mjg59 at codon.org.uk (Matthew Garrett) Date: Wed, 05 Apr 2006 13:27:49 -0000 Subject: [Bug 38174] Re: Power management doesn't work on N340S8 laptop. References: <20060405114042.14572.96835.malonedeb@gandwana.ubuntu.com> Message-ID: <20060405132750.14572.36727.malone@gandwana.ubuntu.com> [4294667.296000] ACPI: BIOS age (1997) fails cutoff (2000), acpi=force is required to enable ACPI Ok, there's the problem. Your BIOS claims to be from 1997, with the result that Linux will ignore it. Editing /boot/grub/menu.lst and changing the line starting #kopt to have acpi=force at the end, and then running sudo update-grub should improve things. If you can attach the output of sudo dmidecode then there's a chance that we can whitelist your hardware. ** Changed in: acpi (Ubuntu) Sourcepackagename: acpi => linux-source-2.6.15 Binarypackagename: acpi => None Severity: Normal => Wishlist -- Power management doesn't work on N340S8 laptop. https://launchpad.net/malone/bugs/38174 From ariel.vardi at gmail.com Wed Apr 5 13:28:44 2006 From: ariel.vardi at gmail.com (Ariel Vardi) Date: Wed, 05 Apr 2006 13:28:44 -0000 Subject: [Bug 35319] Re: no Fn at all Vaio SZ1XP Dapper References: <20060317124552.11105.6446.malonedeb@gandwana.ubuntu.com> Message-ID: <20060405132844.14572.53538.launchpad@gandwana.ubuntu.com> ** Changed in: linux-source-2.6.15 (Ubuntu) Assignee: (unassigned) => Ubuntu Laptop Team -- no Fn at all Vaio SZ1XP Dapper https://launchpad.net/malone/bugs/35319 From giuseppe at iuculano.it Wed Apr 5 13:33:41 2006 From: giuseppe at iuculano.it (Giuseppe) Date: Wed, 05 Apr 2006 13:33:41 -0000 Subject: [Bug 38188] Last kernel upgrade on Dapper hangs and block apt/aptitude References: <20060405133341.14572.88724.malonedeb@gandwana.ubuntu.com> Message-ID: <20060405133341.14572.88724.malonedeb@gandwana.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 linux-image-2.6.15-20-686 (Ubuntu) Severity: Critical Priority: (none set) Status: Unconfirmed Description: Hello, linux-image-2.6.15-20-686 today on dapper block apt and dpkg and makes it unusuable Actualy this is my ps uxa: root 19142 0.0 0.1 5588 2824 pts/0 S+ 15:29 0:00 /usr/bin/perl /var/lib/dpkg/info/linux-image-2.6.15-20-686.postinst configure root 19144 0.0 0.0 3700 1448 pts/0 S+ 15:29 0:00 /bin/sh /usr/sbin/update-initramfs -c -k 2.6.15-20-686 root 19145 0.1 0.1 3816 1620 pts/0 S+ 15:29 0:00 /bin/sh /usr/sbin/mkinitramfs -o /boot/initrd.img-2.6.15-20-686 2.6.15-20-686 root 20507 0.0 0.0 3712 1464 pts/0 S+ 15:29 0:00 /bin/sh /usr/share/initramfs-tools/hooks/evms root 20550 0.0 0.0 3712 680 pts/0 S+ 15:29 0:00 /bin/sh /usr/share/initramfs-tools/hooks/evms root 20551 0.0 0.1 13744 2204 pts/0 Dl+ 15:29 0:00 /usr/sbin/evms_query info root 20552 0.0 0.0 2896 844 pts/0 S+ 15:29 0:00 grep EVMS Version root 20553 0.0 0.0 1776 476 pts/0 S+ 15:29 0:00 awk { print $3; } -- Last kernel upgrade on Dapper hangs and block apt/aptitude https://launchpad.net/malone/bugs/38188 From giuseppe at iuculano.it Wed Apr 5 13:34:57 2006 From: giuseppe at iuculano.it (Giuseppe) Date: Wed, 05 Apr 2006 13:34:57 -0000 Subject: [Bug 38188] Re: Last kernel upgrade on Dapper hangs and block apt/aptitude References: <20060405133341.14572.88724.malonedeb@gandwana.ubuntu.com> Message-ID: <20060405133457.14649.58362.malone@gandwana.ubuntu.com> dpkg and apt is unusable E: dpkg was interrupted, you must manually run 'dpkg --configure -a' to correct the problem. E: Couldn't rebuild package cache root at SD6-Casa:~# dpkg --configure -a Configuro linux-image-2.6.15-20-686 (2.6.15-20.30) ... ... Minutes and minutes... apt is dead sigh ** Changed in: linux-source-2.6.15 linux-image-2.6.15-20-686 (Ubuntu) Severity: Normal => Critical -- Last kernel upgrade on Dapper hangs and block apt/aptitude https://launchpad.net/malone/bugs/38188 From mila.kuchta at atlas.cz Wed Apr 5 13:44:13 2006 From: mila.kuchta at atlas.cz (Mila Kuchta) Date: Wed, 05 Apr 2006 13:44:13 -0000 Subject: [Bug 38191] Anydata CDMA modem driver not working References: <20060405134413.25542.96344.malonedeb@gangotri.ubuntu.com> Message-ID: <20060405134413.25542.96344.malonedeb@gangotri.ubuntu.com> Public bug reported: Affects: linux-meta linux-k7 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: It successfully recognize device, load particular driver, bind /dev/ttyUSB0 and /dev/ttyUSB1 but sending data to modem doesn't do anything... -- Anydata CDMA modem driver not working https://launchpad.net/malone/bugs/38191 From ingbert.braun at gmx.de Wed Apr 5 13:44:51 2006 From: ingbert.braun at gmx.de (ingbraun) Date: Wed, 05 Apr 2006 13:44:51 -0000 Subject: [Bug 37120] Re: wpasupplicant doesn't work properly with rt2500 driver References: <20060329054652.7313.48354.malonedeb@gangotri.ubuntu.com> Message-ID: <20060405134452.25515.81672.malone@gangotri.ubuntu.com> >usually this means that wpasupplicant has detected that the AP in question does not provide WPA In fact, it does provide WPA. As I wrote, the same ap with the same wpa_supplicant.conf works fine with breezy and Fedora... -- wpasupplicant doesn't work properly with rt2500 driver https://launchpad.net/malone/bugs/37120 From nk at iname.com Wed Apr 5 13:48:07 2006 From: nk at iname.com (Norbert Kiesel) Date: Wed, 05 Apr 2006 13:48:07 -0000 Subject: [Bug 38193] kernel panic with "modprobe bcm43xx" References: <20060405134807.25515.93618.malonedeb@gangotri.ubuntu.com> Message-ID: <20060405134807.25515.93618.malonedeb@gangotri.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 linux-image-2.6.15-20-amd64-k8 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: Hi, I get a kernel panic when running "modprobe bcm43xx". I have it currently blacklisted (in /etc/modprobe.d/blacklist) as it did not work for me with -19, so I did a manual modprobe. Nothing in the log files though, but i will try to scribble down the concrete message from the screen later. Was something with interrupts in bcm43xx xmit. -- kernel panic with "modprobe bcm43xx" https://launchpad.net/malone/bugs/38193 From dominikowski at gmail.com Wed Apr 5 14:34:14 2006 From: dominikowski at gmail.com (Tomasz Dominikowski) Date: Wed, 05 Apr 2006 14:34:14 -0000 Subject: [Bug 38174] Re: Power management doesn't work on N340S8 laptop. References: <20060405114042.14572.96835.malonedeb@gandwana.ubuntu.com> Message-ID: <20060405143414.14649.89681.malone@gandwana.ubuntu.com> Hmm, putting acpi=force at the end of the # kopt line doesn't change anything. dmesg still says acpi is disabled. -- Power management doesn't work on N340S8 laptop. https://launchpad.net/malone/bugs/38174 From ervin at kde.org Wed Apr 5 12:14:19 2006 From: ervin at kde.org (ervin) Date: Wed, 05 Apr 2006 12:14:19 -0000 Subject: [Bug 30662] Re: Hang on resume after hibernation with vga16fb References: <20060206160730.11709.45378.malonedeb@gandwana.ubuntu.com> Message-ID: <20060405121420.25515.91307.malone@gangotri.ubuntu.com> I can confirm that it works flawlessly now. Thanks a lot and keep up the good work. -- Hang on resume after hibernation with vga16fb https://launchpad.net/malone/bugs/30662 From susancragin at earthlink.net Wed Apr 5 13:14:31 2006 From: susancragin at earthlink.net (susancragin) Date: Wed, 05 Apr 2006 13:14:31 -0000 Subject: [Bug 26075] Re: HP Pavilion dv1000 laptop wireless button will not enable and disable wireless References: <20060113144745.21012.65346.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060405131431.25515.14032.malone@gangotri.ubuntu.com> I should have added that I just installed the latest Dapper 6. -- HP Pavilion dv1000 laptop wireless button will not enable and disable wireless https://launchpad.net/malone/bugs/26075 From susancragin at earthlink.net Wed Apr 5 13:11:34 2006 From: susancragin at earthlink.net (susancragin) Date: Wed, 05 Apr 2006 13:11:34 -0000 Subject: [Bug 26075] Re: HP Pavilion dv1000 laptop wireless button will not enable and disable wireless References: <20060113144745.21012.65346.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060405131134.14572.1567.malone@gandwana.ubuntu.com> Wireless button does not work on my Acer Ferrari 4005 but I also have had other wireless problems. On load, both wireless card and lan are detected, but wireless config does not find my (unsecure) wireless network. I can load Ubuntu with wired connection no problem, but then cannot configure wireless. Button does not work and no icon appears on screen to add WLAN0 or whatever, per instruction below. http://ccsd.msoe.edu/faq/linux/Ubuntu.jsp?IDFaq=223 Maybe I am doing it wrong, but there seems to be a problem. -- HP Pavilion dv1000 laptop wireless button will not enable and disable wireless https://launchpad.net/malone/bugs/26075 From apeeters at lashout.net Wed Apr 5 11:24:05 2006 From: apeeters at lashout.net (Adriaan Peeters) Date: Wed, 05 Apr 2006 11:24:05 -0000 Subject: [Bug 24172] Re: headphone control disappeared References: <20060113142741.21012.36571.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060405112405.14649.27113.malone@gandwana.ubuntu.com> The Dapper Flight 6 cd does not yet fix the problem. Upstream apparently didn't look at it anymore. -- headphone control disappeared https://launchpad.net/malone/bugs/24172 From ploum at ubuntu.com Wed Apr 5 13:03:11 2006 From: ploum at ubuntu.com (Lionel Dricot) Date: Wed, 05 Apr 2006 13:03:11 -0000 Subject: [Bug 21057] Re: Sound from ES1978 Maestro 2E garbled when USB CD-ROM drive plugged in References: <20060113141036.21012.76826.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060405130311.25542.59464.malone@gangotri.ubuntu.com> The bug is still present in latest Dapper. Unfortunatly... ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Needs Info => Confirmed -- Sound from ES1978 Maestro 2E garbled when USB CD-ROM drive plugged in https://launchpad.net/malone/bugs/21057 From ben.collins at ubuntu.com Wed Apr 5 12:51:15 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Wed, 05 Apr 2006 12:51:15 -0000 Subject: [Bug 14887] Re: Kernel 2.6.10 APM and usb_his IRQ Conflicts Thinkpad 600 References: <20060113133913.21012.49992.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060405125115.14649.99956.malone@gandwana.ubuntu.com> Yeah, but a major issue where? Our main concern is if this still occurs in dapper. Please make sure to test it there. -- Kernel 2.6.10 APM and usb_his IRQ Conflicts Thinkpad 600 https://launchpad.net/malone/bugs/14887 From ben.collins at ubuntu.com Wed Apr 5 12:47:32 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Wed, 05 Apr 2006 12:47:32 -0000 Subject: [Bug 14394] Re: cdrecord/k3b/nautilus problem References: <20060113133632.21012.3776.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060405124732.14649.45762.launchpad@gandwana.ubuntu.com> ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Confirmed => Fix Committed -- cdrecord/k3b/nautilus problem https://launchpad.net/malone/bugs/14394 From ben.collins at ubuntu.com Wed Apr 5 12:30:02 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Wed, 05 Apr 2006 12:30:02 -0000 Subject: [Bug 14312] Re: Q-TEC external 3.5" Harddisk Case is not recognized in Hoary References: <20060113133559.21012.22660.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060405123003.25542.89071.malone@gangotri.ubuntu.com> It's also pretty old, and no responses from the submitter. Please reopen of this is confirmed in dapper. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Needs Info => Rejected -- Q-TEC external 3.5" Harddisk Case is not recognized in Hoary https://launchpad.net/malone/bugs/14312 From goldenear at free.fr Wed Apr 5 14:36:06 2006 From: goldenear at free.fr (goldenear) Date: Wed, 05 Apr 2006 14:36:06 -0000 Subject: [Bug 37680] Re: [Bug 37680] Re: nfs + vlan = kernel panic References: <20060402033252.23707.34124.malonedeb@gandwana.ubuntu.com> <20060404091456.23108.88001.malone@gandwana.ubuntu.com> Message-ID: <4433D5D6.6020901@free.fr> I don't have any backtrace of the kernel panic in my log any more. I have disable vlan two weeks ago, and since that, everything is ok. I will repoduce the kernel panic at the end of the week (I don't wan't to hang the server when people are working on it ;) ). Until then, I guess you can easily reproduce the "bug". I explain here my configuration : Each nfs client uses a 100 Mbit Ethernet link to connect to a (VLAN featured) switch. The switch uses a Gigabit Ethernet uplink to the server. The server is a dhcp (dhcp3), dns (bind9) and nfs (kernel-nfs-server) server. Each client can be on a diffirent subnet/VLAN depending the port it is connect to (at the moment port 1->12 : VLAN 21, port 13->24 : VLAN 22). The Gigabit uplink carries all the VLANs to the server. The server has the vlan package installed and is listening on eth0 (default/untagged VLAN, 192.168.20.0/24), eth0.21 (VLAN 21, 192.168.21.0/24) and eth0.22 (VLAN 22, 192.168.22.0/24). The server also has an eth1 interface to connect to the internet (public IP). /etc/exports contains only the line " /home/ 192.168.0.0/16(rw,sync,insecure)" Now here is what happens : 1) if all the clients are on the default/untagged VLAN (eth0, 192.168.20.0/24), the server crashes after a few hours. 2) if at least one client is on VLAN 21 or 22, the server crashes after a few minutes. When I say the server crashes, sometimes it means Kernel Panic and sometimes it means freeze. I hope this will help fixing the bug.If still useful, I will try to send a backtrace of kernel panic as soon as possible (I have to reactivate VLANs on the server to make it crashes first). Regards. Nicolas Colin Watson a écrit : >Can you attach the backtrace of the kernel panic (you'll probably find it in /var/log/syslog) to this bug, please? > >** Changed in: Ubuntu >Sourcepackagename: None => linux-source-2.6.15 > >** Changed in: linux-source-2.6.15 (Ubuntu) > Status: Unconfirmed => Needs Info > > -- nfs + vlan = kernel panic https://launchpad.net/malone/bugs/37680 From dominikowski at gmail.com Wed Apr 5 14:43:39 2006 From: dominikowski at gmail.com (Tomasz Dominikowski) Date: Wed, 05 Apr 2006 14:43:39 -0000 Subject: [Bug 38174] Re: Power management doesn't work on N340S8 laptop. References: <20060405114042.14572.96835.malonedeb@gandwana.ubuntu.com> Message-ID: <20060405144339.32233.22807.malone@gandwana.ubuntu.com> No wait, my mistake, IT WORKS :D Here's my dmidecode output, appreciate the help: http://tomasz.nukysrealm.net/dmidecode.txt -- Power management doesn't work on N340S8 laptop. https://launchpad.net/malone/bugs/38174 From javiermon at gmail.com Wed Apr 5 14:44:27 2006 From: javiermon at gmail.com (kmon) Date: Wed, 05 Apr 2006 14:44:27 -0000 Subject: [Bug 29498] Re: Acer Ferrari 4005 Fails to resume from suspend to RAM References: <20060123232219.15826.52517.malonedeb@gandwana.ubuntu.com> Message-ID: <20060405144427.32233.94697.malone@gandwana.ubuntu.com> Same here. I'm using dapper up to date. Amd64 arch. Fglrx driver. ** Changed in: linux-source-2.6.15 (Ubuntu) Assignee: (unassigned) => Ubuntu Laptop Team -- Acer Ferrari 4005 Fails to resume from suspend to RAM https://launchpad.net/malone/bugs/29498 From torrb at musiker.nu Wed Apr 5 14:57:41 2006 From: torrb at musiker.nu (torb) Date: Wed, 05 Apr 2006 14:57:41 -0000 Subject: [Bug 35237] Re: noapic required on asus L5800DF References: <20060316200937.11079.96503.malonedeb@gandwana.ubuntu.com> Message-ID: <20060405145741.32313.40337.malone@gandwana.ubuntu.com> I still need noapic to boot with the new -20 kernel. -- noapic required on asus L5800DF https://launchpad.net/malone/bugs/35237 From crimsun at fungus.sh.nu Wed Apr 5 15:23:12 2006 From: crimsun at fungus.sh.nu (Daniel T. Chen) Date: Wed, 05 Apr 2006 15:23:12 -0000 Subject: [Bug 21057] Re: Sound from ES1978 Maestro 2E garbled when USB CD-ROM drive plugged in References: <20060113141036.21012.76826.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060405152312.24486.86662.malone@gangotri.ubuntu.com> By "latest Dapper," do you mean you're running the latest 20.30 kernel? $ cat /proc/version Linux version 2.6.15-20-686 (buildd at vernadsky) (gcc version 4.0.3 (Ubuntu 4.0.3-1ubuntu3)) #1 SMP PREEMPT Tue Apr 4 18:37:00 UTC 2006 ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Confirmed => Needs Info -- Sound from ES1978 Maestro 2E garbled when USB CD-ROM drive plugged in https://launchpad.net/malone/bugs/21057 From grard at de-vos.net Wed Apr 5 15:37:53 2006 From: grard at de-vos.net (Grard) Date: Wed, 05 Apr 2006 15:37:53 -0000 Subject: [Bug 34651] Re: ACPI does not work on Asus motherboard with nForce chipset References: <20060312213644.17044.65036.malonedeb@gangotri.ubuntu.com> Message-ID: <20060405153753.24486.60805.malone@gangotri.ubuntu.com> I have the same motherboard and the same problem: no forcedeth, sata,.. both x86 and AMD64 2.6.15 kernels. tested with flight5 & 6 Adding "pci=nommconf" to the kernel parameters fixes it for me too. -- ACPI does not work on Asus motherboard with nForce chipset https://launchpad.net/malone/bugs/34651 From ben.collins at ubuntu.com Wed Apr 5 15:53:52 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Wed, 05 Apr 2006 15:53:52 -0000 Subject: [Bug 19054] Re: pcmcia modem References: <20060113135933.21012.1792.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060405155353.24516.81217.malone@gangotri.ubuntu.com> That's great. However, we'd still like to know if this is fixed in dapper or not. -- pcmcia modem https://launchpad.net/malone/bugs/19054 From ben.collins at ubuntu.com Wed Apr 5 15:52:30 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Wed, 05 Apr 2006 15:52:30 -0000 Subject: [Bug 18691] Re: Computer gets hotter if no USB port is used. References: <20060113135741.21012.41956.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060405155230.24486.508.malone@gangotri.ubuntu.com> What sort of USB device are you talking about? I can only explain this as a hardware issue, not one that the kernel can control. -- Computer gets hotter if no USB port is used. https://launchpad.net/malone/bugs/18691 From ben.collins at ubuntu.com Wed Apr 5 15:50:43 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Wed, 05 Apr 2006 15:50:43 -0000 Subject: [Bug 18489] Re: mice detected as imps2 not as ps2++ References: <20060113135641.21012.86896.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060405155043.24516.5330.malone@gangotri.ubuntu.com> If there's a difference between liveCD and install on how modules get loaded, it generally has to be udev. ** Changed in: linux-source-2.6.15 (Ubuntu) Sourcepackagename: linux-source-2.6.15 => udev -- mice detected as imps2 not as ps2++ https://launchpad.net/malone/bugs/18489 From ben.collins at ubuntu.com Wed Apr 5 15:55:23 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Wed, 05 Apr 2006 15:55:23 -0000 Subject: [Bug 19466] Re: The boot process often stay at EVMS. References: <20060113140151.21012.13505.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060405155523.24516.17210.launchpad@gangotri.ubuntu.com> ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Needs Info => Fix Released -- The boot process often stay at EVMS. https://launchpad.net/malone/bugs/19466 From ben.collins at ubuntu.com Wed Apr 5 16:05:03 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Wed, 05 Apr 2006 16:05:03 -0000 Subject: [Bug 20781] Re: pcmcia detection locks up my laptop [also dapper flight 5] References: <20060113140912.21012.22149.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060405160503.24516.70600.launchpad@gangotri.ubuntu.com> ** Changed in: linux-source-2.6.15 (Ubuntu) Sourcepackagename: linux-source-2.6.15 => pcmcia-cs Binarypackagename: linux-source-2.6.15 => None -- pcmcia detection locks up my laptop [also dapper flight 5] https://launchpad.net/malone/bugs/20781 From ben.collins at ubuntu.com Wed Apr 5 16:00:18 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Wed, 05 Apr 2006 16:00:18 -0000 Subject: [Bug 20125] Re: USB mouse freezing under Xorg with linux-image-2.6.12 References: <20060113140530.21012.7485.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060405160018.32313.74331.launchpad@gandwana.ubuntu.com> ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Needs Info => Fix Committed -- USB mouse freezing under Xorg with linux-image-2.6.12 https://launchpad.net/malone/bugs/20125 From ben.collins at ubuntu.com Wed Apr 5 16:09:10 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Wed, 05 Apr 2006 16:09:10 -0000 Subject: [Bug 20943] Re: module insertion hangs in apic/irq setup References: <20060113141001.21012.82199.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060405160910.32313.1621.malone@gandwana.ubuntu.com> This should be fixed with recent (probably atleast -20) kernels. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Needs Info => Fix Committed -- module insertion hangs in apic/irq setup https://launchpad.net/malone/bugs/20943 From mdz at ubuntu.com Wed Apr 5 16:05:43 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Wed, 05 Apr 2006 16:05:43 -0000 Subject: [Bug 18489] Re: [Bug 18489] Re: mice detected as imps2 not as ps2++ References: <20060113135641.21012.86896.launchpad@macquarie.warthogs.hbd.com> <20060405155043.24516.5330.malone@gangotri.ubuntu.com> Message-ID: <20060405160543.GM11734@alcor.net> On Wed, Apr 05, 2006 at 03:50:43PM -0000, Ben Collins wrote: > If there's a difference between liveCD and install on how modules get loaded, it generally has to be udev. > > ** Changed in: linux-source-2.6.15 (Ubuntu) > Sourcepackagename: linux-source-2.6.15 => udev There really shouldn't be a difference, and that's been the case for over a year now. Do you know of any reason why uhci-hcd and psmouse should interact at all? -- - mdz -- mice detected as imps2 not as ps2++ https://launchpad.net/malone/bugs/18489 From mdz at ubuntu.com Wed Apr 5 16:06:25 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Wed, 05 Apr 2006 16:06:25 -0000 Subject: [Bug 18489] Re: mice detected as imps2 not as ps2++ References: <20060113135641.21012.86896.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060405160625.24516.90110.malone@gangotri.ubuntu.com> This report is rather old; please test with a more recent Ubuntu (5.10 or Dapper Flight 6) and let us know whether you are still having this problem ** Changed in: udev (Ubuntu) Assignee: Matt Zimmerman => (unassigned) -- mice detected as imps2 not as ps2++ https://launchpad.net/malone/bugs/18489 From teppic74 at hotmail.com Wed Apr 5 16:13:44 2006 From: teppic74 at hotmail.com (Barry Shilliday) Date: Wed, 05 Apr 2006 16:13:44 -0000 Subject: [Bug 38218] sky2 module update broken References: <20060405161344.32313.90376.malonedeb@gandwana.ubuntu.com> Message-ID: <20060405161344.32313.90376.malonedeb@gandwana.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 linux-image-2.6.15-20-686 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: In kernel 2.6.15-19 there is no problem. The 2.6.15-20 image contains an update to the sky2 module, and networking no longer works at all. The module loads but I cannot get anything from the network - no address by dhcp and setting the IP address manually also does nothing. Hardware: 03:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8053 PCI-E Gigabit Ethernet Controller (rev 15) -- sky2 module update broken https://launchpad.net/malone/bugs/38218 From hostmaster at grawert.net Wed Apr 5 16:14:46 2006 From: hostmaster at grawert.net (Oliver Grawert) Date: Wed, 05 Apr 2006 16:14:46 -0000 Subject: [Bug 18489] Re: mice detected as imps2 not as ps2++ References: <20060113135641.21012.86896.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060405161446.24516.39309.malone@gangotri.ubuntu.com> i wonder why thats not assigned to xserver-xorg are mouse protocols used anywhere in the kernel or udev ? would be news to me ... -- mice detected as imps2 not as ps2++ https://launchpad.net/malone/bugs/18489 From lakin.wecker at gmail.com Wed Apr 5 16:12:29 2006 From: lakin.wecker at gmail.com (Lakin Wecker) Date: Wed, 05 Apr 2006 16:12:29 -0000 Subject: [Bug 29499] Re: Acer Ferrari 4005 Fails to resume from Hibernate References: <20060123232532.28441.7930.malonedeb@gangotri.ubuntu.com> Message-ID: <20060405161229.24486.90061.malone@gangotri.ubuntu.com> It works for me. Thanks Matthew, you and whomever else worked on this rock. -- Acer Ferrari 4005 Fails to resume from Hibernate https://launchpad.net/malone/bugs/29499 From derrygeuther at wanadoo.nl Wed Apr 5 16:21:01 2006 From: derrygeuther at wanadoo.nl (Derry Geuther) Date: Wed, 05 Apr 2006 16:21:01 -0000 Subject: [Bug 38219] Gnome freezes after log in References: <20060405162101.24486.32586.malonedeb@gangotri.ubuntu.com> Message-ID: <20060405162101.24486.32586.malonedeb@gangotri.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: Hello, Concerning Ubuntu 6.06 Dapper Drake with dayly update. After doing a clean install (Apr, 03) I could log in and get automatic update. Then I had to reboot. When I logged in and Gnome started, the screen freezed and the loggin sound hung. Nothing I could do but doing a hard reboot. Tried to log in again. Freezed again. Reboot again, this time using recovery option. From the command line I run: # init 5 I came in the loggin screen. Logged in and Gnome started just fine.Tested my hardware and some programs; all seemed to be O.K. Still whenever I boot with default option and log in, Gnome freezes within 2,3 seconds. Note that this is the first time I report a bug. I'm just a new user of Linux/GPL/Free (as in freedom) Software, but I'm learning it. I've looked if similar bug has been reported and found some, though not exactly the same. Found this too http://ubuntuforums.org/showthread.php?t=132895&page=2. If you need more information, I'm eager to help. Greeting, Derry -- Gnome freezes after log in https://launchpad.net/malone/bugs/38219 From ben.collins at ubuntu.com Wed Apr 5 16:22:27 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Wed, 05 Apr 2006 16:22:27 -0000 Subject: [Bug 22195] Re: acx_111 pcmcia not working References: <20060113141656.21012.31766.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060405162227.32313.60055.malone@gandwana.ubuntu.com> Please read /lib/firmware/`uname -r`/acx/readme.txt This will tell you how to provide the right information. -- acx_111 pcmcia not working https://launchpad.net/malone/bugs/22195 From ben.collins at ubuntu.com Wed Apr 5 16:28:31 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Wed, 05 Apr 2006 16:28:31 -0000 Subject: [Bug 22449] Re: Sis 190 network driver References: <20060113141825.21012.85759.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060405162831.32313.60248.malone@gandwana.ubuntu.com> Added sis190 to nic-modules udeb. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Unconfirmed => Fix Committed -- Sis 190 network driver https://launchpad.net/malone/bugs/22449 From ben.collins at ubuntu.com Wed Apr 5 16:26:22 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Wed, 05 Apr 2006 16:26:22 -0000 Subject: [Bug 18489] Re: mice detected as imps2 not as ps2++ References: <20060113135641.21012.86896.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060405162622.32313.45583.malone@gandwana.ubuntu.com> That's what I was wondering as well. If the output of dmesg and /proc/bus/input/devices doesn't change, then it's very much an xorg issue. -- mice detected as imps2 not as ps2++ https://launchpad.net/malone/bugs/18489 From jstueve at verizon.net Wed Apr 5 16:40:18 2006 From: jstueve at verizon.net (jstueve) Date: Wed, 05 Apr 2006 16:40:18 -0000 Subject: [Bug 38220] Xorg [dri] i915 kernel module is 1.1 References: <20060405164018.24486.5077.malonedeb@gangotri.ubuntu.com> Message-ID: <20060405164018.24486.5077.malonedeb@gangotri.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: DRI is disabled after updating to kernel 2.6.15.20 (restricted-modules are up to date) pertainent part of Xorg.0.log ---------- (EE) I810(0): [dri] I830DRIScreenInit failed because of a version mismatch. [dri] i915 kernel module version is 1.1.0 but version 1.4 or greater is needed. [dri] Disabling DRI ---------- Same configuration works fine with 2.6.15.19 kernel. -- Xorg [dri] i915 kernel module is 1.1 https://launchpad.net/malone/bugs/38220 From ben.collins at ubuntu.com Wed Apr 5 16:48:34 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Wed, 05 Apr 2006 16:48:34 -0000 Subject: [Bug 23445] Re: iMac G5 will freeze after booting up References: <20060113142343.21012.90472.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060405164834.24486.73271.malone@gangotri.ubuntu.com> Reverting the tumbler portions of my ppc-snd rework. Hopefully this will fix a lot of problems. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Needs Info => Fix Committed -- iMac G5 will freeze after booting up https://launchpad.net/malone/bugs/23445 From ben.collins at ubuntu.com Wed Apr 5 16:46:40 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Wed, 05 Apr 2006 16:46:40 -0000 Subject: [Bug 22450] Re: Vaio A497XP doesn't reboot References: <20060113141825.21012.10593.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060405164640.32233.68417.malone@gandwana.ubuntu.com> Try booting the machine with reboot=h, and see if that allows the machine to reboot properly. If so, then please attach the output of "sudo dmidecode > dmi.txt" -- Vaio A497XP doesn't reboot https://launchpad.net/malone/bugs/22450 From dth at dth.net Wed Apr 5 16:50:07 2006 From: dth at dth.net (Danny) Date: Wed, 05 Apr 2006 16:50:07 -0000 Subject: [Bug 35951] Re: [Bug 35951] no audio output (card recognised) References: <20060322044815.30471.23828.malonedeb@gangotri.ubuntu.com> Message-ID: <20060405165007.GA31884@dth.net> Quoting Daniel T. Chen (crimsun at fungus.sh.nu): > This was my fault, sorry, due to an accidental paste error. The fix has > already been merged in our git tree and will be released as > 2.6.15-20.30. great job! Works like a dream (upgraded this morning) Thanks! Danny -- In science it often happens that scientists say, 'You know that's a really good argument; my position is mistaken,' and then they actually change their minds and you never hear that old view from them again. They really do it. It doesn't happen as often as it should, because scientists are human and change is sometimes painful. But it happens every day. I cannot recall the last time something like that happened in politics or religion. -- Carl Sagan, 1987 CSICOP keynote address -- no audio output (card recognised) https://launchpad.net/malone/bugs/35951 From Lamego at PT-link.net Wed Apr 5 16:50:23 2006 From: Lamego at PT-link.net (=?utf-8?q?Jo=C3=A3o_Pinto?=) Date: Wed, 05 Apr 2006 16:50:23 -0000 Subject: [Bug 32504] Re: LCD Out of Range during graphical boot References: <20060222194110.15743.11424.malonedeb@gandwana.ubuntu.com> Message-ID: <20060405165023.24516.45834.malone@gangotri.ubuntu.com> Hello, this was some time ago, meanwhile I have reinstalled from a newer flight cd, and explicitly selected a lower resolution for the installation so I don't have a problem anymore. I am sure it displayed "35.7KHz/80Hz" and yes I do have classic PC (The cpu is an amd atlhon xp 1.3 MHz). The BIOS logo does show up correctly during boot. The grub menu did show up correctly, the LCD got out of sync immediately after grub. -- LCD Out of Range during graphical boot https://launchpad.net/malone/bugs/32504 From ben.collins at ubuntu.com Wed Apr 5 16:54:50 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Wed, 05 Apr 2006 16:54:50 -0000 Subject: [Bug 24468] Re: Breezy install kernel panics References: <20060113142913.21012.72125.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060405165450.24516.66371.malone@gangotri.ubuntu.com> Thanks for looking into this. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Needs Info => Rejected -- Breezy install kernel panics https://launchpad.net/malone/bugs/24468 From ben.collins at ubuntu.com Wed Apr 5 16:52:42 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Wed, 05 Apr 2006 16:52:42 -0000 Subject: [Bug 23763] Re: no sound on Clevo D900T References: <20060113142528.21012.36962.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060405165243.24486.4448.launchpad@gangotri.ubuntu.com> ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Needs Info => Rejected -- no sound on Clevo D900T https://launchpad.net/malone/bugs/23763 From ben.collins at ubuntu.com Wed Apr 5 16:51:18 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Wed, 05 Apr 2006 16:51:18 -0000 Subject: [Bug 23587] Re: ipw2200 firmware error and restarting in 1.0.6 References: <20060113142433.21012.86993.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060405165118.24516.6622.malone@gangotri.ubuntu.com> Not sure what you people are using, but we surely have 1.1.1 and related patches in dapper now. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Unconfirmed => Fix Released -- ipw2200 firmware error and restarting in 1.0.6 https://launchpad.net/malone/bugs/23587 From hostmaster at grawert.net Wed Apr 5 17:02:29 2006 From: hostmaster at grawert.net (Oliver Grawert) Date: Wed, 05 Apr 2006 17:02:29 -0000 Subject: [Bug 18489] Re: mice detected as imps2 not as ps2++ References: <20060113135641.21012.86896.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060405170229.24486.33301.malone@gangotri.ubuntu.com> here is the responsible snippet from breezys dexconf, i already had a hard time with ltsp with these hardcoded values ... (in dapper "ExplorerPS/2" is hardcoded instead of ImPS/2) exec 4>"$DEXCONFTMPDIR/InputDeviceMouse" cat >&4 <
&4 fi -- mice detected as imps2 not as ps2++ https://launchpad.net/malone/bugs/18489 From tiagomatos at gmail.com Wed Apr 5 17:11:32 2006 From: tiagomatos at gmail.com (Rui Matos) Date: Wed, 05 Apr 2006 17:11:32 -0000 Subject: [Bug 33161] Re: PnPACPI errors on boot and no /dev/fd0 References: <20060228154107.17498.36793.malonedeb@gangotri.ubuntu.com> Message-ID: <20060405171132.32313.92742.malone@gandwana.ubuntu.com> Please check the 2.6.15-20 kernel. -- PnPACPI errors on boot and no /dev/fd0 https://launchpad.net/malone/bugs/33161 From tiagomatos at gmail.com Wed Apr 5 17:16:20 2006 From: tiagomatos at gmail.com (Rui Matos) Date: Wed, 05 Apr 2006 17:16:20 -0000 Subject: [Bug 32289] Re: PnPACPI: METHOD_NAME__CRS failure for PNP0c02 References: <20060221123652.31322.22459.malonedeb@gangotri.ubuntu.com> Message-ID: <20060405171620.24486.76715.malone@gangotri.ubuntu.com> This seems to be completly fixed in 2.6.15-20. Even my speaker beep works again :-) -- PnPACPI: METHOD_NAME__CRS failure for PNP0c02 https://launchpad.net/malone/bugs/32289 From oyvind at repvik.org Wed Apr 5 17:28:01 2006 From: oyvind at repvik.org (repvik) Date: Wed, 05 Apr 2006 17:28:01 -0000 Subject: [Bug 38228] ACPI broken on IBM ThinkPad R40e (fix) References: <20060405172801.24486.46855.malonedeb@gangotri.ubuntu.com> Message-ID: <20060405172801.24486.46855.malonedeb@gangotri.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 kernel-image-2.6.15-19-386-di (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: The BIOS on the R40e is broken, hangs when the processor module is loaded. The fix for this is adding the following lines to processor_idle.c: {set_max_cstate, "IBM ThinkPad R40e", { DMI_MATCH(DMI_BIOS_VENDOR, "IBM"), DMI_MATCH(DMI_BIOS_VERSION, "1SET70WW") }, (void*)1}, The other revisions of the same BIOS has been blacklisted, this one has not. It should go directly after the entry for "1SET68WW". I'm currently unable to create a diff to do it. -- ACPI broken on IBM ThinkPad R40e (fix) https://launchpad.net/malone/bugs/38228 From harbaugh at ncifcrf.gov Wed Apr 5 17:50:02 2006 From: harbaugh at ncifcrf.gov (Toni Harbaugh-Blackford) Date: Wed, 05 Apr 2006 17:50:02 -0000 Subject: [Bug 33431] powerpc64 install via firewire cd fails References: <20060302162626.17525.23476.malonedeb@gangotri.ubuntu.com> Message-ID: <20060405175002.24486.29741.launchpad@canonical@gangotri.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Assignee: Ben Collins Status: Unconfirmed Description: I attempted to install the ubuntu-server powerpc dialy build from yesterday on a headless Xserve G5 system (serial console, no internal cd) via an external firewire cd. The installation gets as far as loading the ram disk, then hangs at DO-QUIESCE finished The installation was started with the following boot line: boot: expert-powerpc64 video=ofonly console=ttyS0,57600 by comparison, on debian testing the installation continues past this point successfully. Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Assignee: Ben Collins Status: Unconfirmed Description: I attempted to install the ubuntu-server powerpc dialy build from yesterday on a headless Xserve G5 system (serial console, no internal cd) via an external firewire cd. The installation gets as far as loading the ram disk, then hangs at DO-QUIESCE finished The installation was started with the following boot line: boot: expert-powerpc64 video=ofonly console=ttyS0,57600 by comparison, on debian testing the installation continues past this point successfully. -- powerpc64 install via firewire cd fails https://launchpad.net/malone/bugs/33431 From mpcolino at gmail.com Wed Apr 5 17:43:07 2006 From: mpcolino at gmail.com (Miguel P.C.) Date: Wed, 05 Apr 2006 17:43:07 -0000 Subject: [Bug 37391] Re: SD Card Reader not working References: <20060330203528.5415.6123.malonedeb@gangotri.ubuntu.com> Message-ID: <20060405174307.24486.30768.malone@gangotri.ubuntu.com> Solved using linux-image-2.6.15-20. ** Changed in: linux-source-2.6.15 linux-image-2.6.15-19-386 (Ubuntu) Assignee: (unassigned) => Miguel P.C. Status: Unconfirmed => Fix Released -- SD Card Reader not working https://launchpad.net/malone/bugs/37391 From mdz at ubuntu.com Wed Apr 5 17:50:01 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Wed, 05 Apr 2006 17:50:01 -0000 Subject: [Bug 33431] Re: powerpc64 install via firewire cd fails References: <20060302162626.17525.23476.malonedeb@gangotri.ubuntu.com> Message-ID: <20060405175002.24486.59158.launchpad@gangotri.ubuntu.com> ** Changed in: yaboot-installer (Ubuntu) Sourcepackagename: yaboot-installer => linux-source-2.6.15 Binarypackagename: yaboot-installer => None Assignee: (unassigned) => Ben Collins -- powerpc64 install via firewire cd fails https://launchpad.net/malone/bugs/33431 From mdz at ubuntu.com Wed Apr 5 17:52:07 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Wed, 05 Apr 2006 17:52:07 -0000 Subject: [Bug 33401] Re: SD Card Reader stopped working References: <20060302130216.22140.36667.malonedeb@gandwana.ubuntu.com> Message-ID: <20060405175207.32313.89333.malone@gandwana.ubuntu.com> Please attach dmesg output from both kernels, showing the card reader being detected (or not) ** Changed in: linux-source-2.6.15 linux-image-2.6.15-16-686 (Ubuntu) Assignee: (unassigned) => Ben Collins Status: Unconfirmed => Needs Info -- SD Card Reader stopped working https://launchpad.net/malone/bugs/33401 From mdz at ubuntu.com Wed Apr 5 17:54:32 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Wed, 05 Apr 2006 17:54:32 -0000 Subject: [Bug 33387] Re: Creative webcam plus driver does not work. References: <20060302105223.22115.76729.malonedeb@gandwana.ubuntu.com> Message-ID: <20060405175432.32313.24452.launchpad@gandwana.ubuntu.com> ** Changed in: linux-source-2.6.15 linux-image-2.6.15-16-686 (Ubuntu) Assignee: (unassigned) => Ben Collins Status: Unconfirmed => Confirmed -- Creative webcam plus driver does not work. https://launchpad.net/malone/bugs/33387 From burner at suppressingfire.org Wed Apr 5 17:58:13 2006 From: burner at suppressingfire.org (Michael R. Head) Date: Wed, 05 Apr 2006 17:58:13 -0000 Subject: [Bug 38109] Re: [dapper] g4-based Mac Mini's bcm43xx wireless fails to work References: <20060405013409.25542.83349.malonedeb@gangotri.ubuntu.com> Message-ID: <20060405175813.32313.93273.malone@gandwana.ubuntu.com> Gotta test against the -20 kernel tonight. -- [dapper] g4-based Mac Mini's bcm43xx wireless fails to work https://launchpad.net/malone/bugs/38109 From jos_dehaes at fastmail.fm Wed Apr 5 18:02:21 2006 From: jos_dehaes at fastmail.fm (Jos Dehaes) Date: Wed, 05 Apr 2006 18:02:21 -0000 Subject: [Bug 38238] prism54 no longer works References: <20060405180221.24486.72499.malonedeb@gangotri.ubuntu.com> Message-ID: <20060405180221.24486.72499.malonedeb@gangotri.ubuntu.com> Public bug reported: Affects: linux-meta linux-source (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: With inux-source-2.6.15_2.6.15-20.30 my wifi does no longer work. In -19 it's fine. Relevant snips from /var/log/messages: Apr 5 19:43:05 localhost kernel: [4294699.152000] Loaded prism54 driver, version 1.2 and from daemon.log: Apr 5 19:43:36 localhost firmware_helper[5282]: main: error loading '/lib/firmware/isl3886' for device '/class/firmware/0000:07:00.0' with driver 'islsm_pci' Apr 5 19:43:59 localhost firmware_helper[5285]: main: error loading '/lib/firmware/isl3886' for device '/class/firmware/0000:07:00.0' with driver 'islsm_pci' Apr 5 19:44:17 localhost NetworkManager: ^IUpdating allowed wireless network lists. Apr 5 19:44:22 localhost firmware_helper[5441]: main: error loading '/lib/firmware/isl3886' for device '/class/firmware/0000:07:00.0' with driver 'islsm_pci' Apr 5 19:44:45 localhost firmware_helper[5534]: main: error loading '/lib/firmware/isl3886' for device '/class/firmware/0000:07:00.0' with driver 'islsm_pci' Apr 5 19:44:58 localhost NetworkManager: ^IDeactivating device eth2. Apr 5 19:45:00 localhost NetworkManager: ^I nm_device_802_11_wireless_set_wep_enc_key (): error setting key for device eth2: Unknown error 524 That firmware file is not at the location it looks. Here is the contents of /lib/firmware: jos at hamerkeuh:~$ ls /lib/firmware/ 2.6.15-19-686 2.6.15-20-686 jos at hamerkeuh:~$ ls /lib/firmware/2.6.15-20-686/ acx atmel_at76c505-rfmd.bin atmel_at76c502_3com.bin atmel_at76c506.bin atmel_at76c502_3com-wpa.bin atmel_at76c506-wpa.bin atmel_at76c502.bin ipw2100-1.3.fw atmel_at76c502d.bin ipw2100-1.3-i.fw atmel_at76c502d-wpa.bin ipw2100-1.3-p.fw atmel_at76c502e.bin ipw2200-bss.fw atmel_at76c502e-wpa.bin ipw2200-ibss.fw atmel_at76c502-wpa.bin ipw2200-sniffer.fw atmel_at76c503-i3861.bin isl3890 atmel_at76c503-i3863.bin zd1211b-WS11Ub.fw atmel_at76c503-rfmd-0.90.2-140.bin zd1211b-WS11UPh.fw atmel_at76c503-rfmd-acc.bin zd1211b-WS11UPhm.fw atmel_at76c503-rfmd.bin zd1211b-WS11UPhR.fw atmel_at76c504_2958-wpa.bin zd1211b-WS11Ur.fw atmel_at76c504a_2958-wpa.bin zd1211-WS11Ub.fw atmel_at76c504.bin zd1211-WS11UPh.fw atmel_at76c504c-wpa.bin zd1211-WS11UPhm.fw atmel_at76c505a-rfmd2958.bin zd1211-WS11UPhR.fw atmel_at76c505-rfmd2958.bin zd1211-WS11Ur.fw -- prism54 no longer works https://launchpad.net/malone/bugs/38238 From launchpad.net.tormod at xoxy.net Wed Apr 5 18:03:32 2006 From: launchpad.net.tormod at xoxy.net (Tormod Volden) Date: Wed, 05 Apr 2006 18:03:32 -0000 Subject: [Bug 32599] Re: kernel's PHP^Wpnp subsystem is broken References: <20060223124419.14968.52544.malonedeb@gangotri.ubuntu.com> Message-ID: <20060405180332.24486.66938.malone@gangotri.ubuntu.com> The "floppy" module still has to be loaded manually in Flight-6. A msdos floppy is also not recognised, because the "msdos" module is not loaded. -- kernel's PHP^Wpnp subsystem is broken https://launchpad.net/malone/bugs/32599 From launchpad.net.tormod at xoxy.net Wed Apr 5 18:09:23 2006 From: launchpad.net.tormod at xoxy.net (Tormod Volden) Date: Wed, 05 Apr 2006 18:09:23 -0000 Subject: [Bug 37977] Re: kernel floppy module does not load References: <20060404060934.25863.89639.malonedeb@gangotri.ubuntu.com> Message-ID: <20060405180923.24516.1347.malone@gangotri.ubuntu.com> *** This bug is a duplicate of bug 32599 *** Thanks for the bug report! This issue is already discussed in bug #32599. In general, "modprobe floppy" is the preferred way. ** This bug has been marked a duplicate of bug 32599 kernel's PHP^Wpnp subsystem is broken -- kernel floppy module does not load https://launchpad.net/malone/bugs/37977 From launchpad.net.tormod at xoxy.net Wed Apr 5 18:09:42 2006 From: launchpad.net.tormod at xoxy.net (Tormod Volden) Date: Wed, 05 Apr 2006 18:09:42 -0000 Subject: [Bug 32599] Re: kernel's PHP^Wpnp subsystem is broken References: <20060223124419.14968.52544.malonedeb@gangotri.ubuntu.com> Message-ID: <20060405180942.24516.40089.launchpad@gangotri.ubuntu.com> ** Bug 37977 has been marked a duplicate of this bug -- kernel's PHP^Wpnp subsystem is broken https://launchpad.net/malone/bugs/32599 From jos_dehaes at fastmail.fm Wed Apr 5 18:16:11 2006 From: jos_dehaes at fastmail.fm (Jos Dehaes) Date: Wed, 05 Apr 2006 18:16:11 -0000 Subject: [Bug 38238] Re: prism54 no longer works References: <20060405180221.24486.72499.malonedeb@gangotri.ubuntu.com> Message-ID: <20060405181611.24486.57563.launchpad@gangotri.ubuntu.com> ** Changed in: linux-meta linux-source (Ubuntu) Severity: Normal => Major -- prism54 no longer works https://launchpad.net/malone/bugs/38238 From lucas at lucas-nussbaum.net Wed Apr 5 18:26:22 2006 From: lucas at lucas-nussbaum.net (Lucas Nussbaum) Date: Wed, 05 Apr 2006 18:26:22 -0000 Subject: [Bug 34155] Re: sleep and hibernate don't work on Dell C640 (regression from breezy) References: <20060308232941.29403.57547.malonedeb@gangotri.ubuntu.com> Message-ID: <20060405182622.24516.9307.malone@gangotri.ubuntu.com> Hi, This has been reported a month ago, and is extremly annoying. Are there some guidelines somewhere about helping to debug this ? ** Changed in: linux-source-2.6.15 (Ubuntu) Sourcepackagename: linux-source-2.6.15 => None -- sleep and hibernate don't work on Dell C640 (regression from breezy) https://launchpad.net/malone/bugs/34155 From giuseppe at iuculano.it Wed Apr 5 18:37:06 2006 From: giuseppe at iuculano.it (Giuseppe) Date: Wed, 05 Apr 2006 18:37:06 -0000 Subject: [Bug 38188] Re: Last kernel upgrade on Dapper hangs and block apt/aptitude References: <20060405133341.14572.88724.malonedeb@gandwana.ubuntu.com> Message-ID: <20060405183706.24486.95617.malone@gangotri.ubuntu.com> About 15 minutes and configuration is ok... switch to normal severity ** Changed in: linux-source-2.6.15 linux-image-2.6.15-20-686 (Ubuntu) Severity: Critical => Normal -- Last kernel upgrade on Dapper hangs and block apt/aptitude https://launchpad.net/malone/bugs/38188 From hove99 at gmail.com Wed Apr 5 18:36:20 2006 From: hove99 at gmail.com (hove99) Date: Wed, 05 Apr 2006 18:36:20 -0000 Subject: [Bug 33401] Re: SD Card Reader stopped working References: <20060302130216.22140.36667.malonedeb@gandwana.ubuntu.com> Message-ID: <20060405183620.24516.26492.malone@gangotri.ubuntu.com> Just today the problem solved itself, as Ubuntu Dapper Drake updated itself to kernel 2.6.15-20-686 The other kernels since and including 2.6.15-16-686 have all had the problem But now it open my sd cards just fine. -- SD Card Reader stopped working https://launchpad.net/malone/bugs/33401 From jukka.hellen at gmail.com Wed Apr 5 19:45:54 2006 From: jukka.hellen at gmail.com (jhellen) Date: Wed, 05 Apr 2006 19:45:54 -0000 Subject: [Bug 33716] System freeze with [SiS] USB 2.0 References: <20060304164103.22115.35400.malonedeb@gandwana.ubuntu.com> Message-ID: <20060405194554.32233.58973.launchpad@canonical@gandwana.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Assignee: Ben Collins Status: Unconfirmed Description: I've tried to plug in an old HP camera and some usb-drives to this motherboard and the system freezes everytime. Not even possible to restart X. It's a MSI motherboard (about 2 years old). Has been the only reason why my dad hasn't switched to Linux. Dapper F4 with latest updates. 0000:00:00.0 Host bridge: Silicon Integrated Systems [SiS] 645xx (rev 50) 0000:00:01.0 PCI bridge: Silicon Integrated Systems [SiS] SiS AGP Port (virtual PCI-to-PCI bridge) 0000:00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS963 [MuTIOL Media I O] (rev 25) 0000:00:02.1 SMBus: Silicon Integrated Systems [SiS] SiS961/2 SMBus Controller 0000:00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] 0000:00:02.7 Multimedia audio controller: Silicon Integrated Systems [SiS] Sound Controller (rev a0) 0000:00:03.0 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 0f) 0000:00:03.1 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 0f) 0000:00:03.3 USB Controller: Silicon Integrated Systems [SiS] USB 2.0 Controller 0000:00:04.0 Ethernet controller: Silicon Integrated Systems [SiS] SiS900 PCI Fa st Ethernet (rev 90) 0000:00:06.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host Control ler (rev 46) 0000:00:07.0 Multimedia video controller: Brooktree Corporation Bt879(??) Video Capture (rev 11) 0000:00:07.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (r ev 11) 0000:00:09.0 USB Controller: NEC Corporation USB (rev 43) 0000:00:09.1 USB Controller: NEC Corporation USB (rev 43) 0000:00:09.2 USB Controller: NEC Corporation USB 2.0 (rev 04) 0000:01:00.0 VGA compatible controller: nVidia Corporation NV34 [GeForce FX 5200 ] (rev a1) Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Assignee: Ben Collins Status: Unconfirmed Description: I've tried to plug in an old HP camera and some usb-drives to this motherboard and the system freezes everytime. Not even possible to restart X. It's a MSI motherboard (about 2 years old). Has been the only reason why my dad hasn't switched to Linux. Dapper F4 with latest updates. 0000:00:00.0 Host bridge: Silicon Integrated Systems [SiS] 645xx (rev 50) 0000:00:01.0 PCI bridge: Silicon Integrated Systems [SiS] SiS AGP Port (virtual PCI-to-PCI bridge) 0000:00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS963 [MuTIOL Media I O] (rev 25) 0000:00:02.1 SMBus: Silicon Integrated Systems [SiS] SiS961/2 SMBus Controller 0000:00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] 0000:00:02.7 Multimedia audio controller: Silicon Integrated Systems [SiS] Sound Controller (rev a0) 0000:00:03.0 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 0f) 0000:00:03.1 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 0f) 0000:00:03.3 USB Controller: Silicon Integrated Systems [SiS] USB 2.0 Controller 0000:00:04.0 Ethernet controller: Silicon Integrated Systems [SiS] SiS900 PCI Fa st Ethernet (rev 90) 0000:00:06.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host Control ler (rev 46) 0000:00:07.0 Multimedia video controller: Brooktree Corporation Bt879(??) Video Capture (rev 11) 0000:00:07.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (r ev 11) 0000:00:09.0 USB Controller: NEC Corporation USB (rev 43) 0000:00:09.1 USB Controller: NEC Corporation USB (rev 43) 0000:00:09.2 USB Controller: NEC Corporation USB 2.0 (rev 04) 0000:01:00.0 VGA compatible controller: nVidia Corporation NV34 [GeForce FX 5200 ] (rev a1) -- System freeze with [SiS] USB 2.0 https://launchpad.net/malone/bugs/33716 From alberto.botti at yoda2000.net Wed Apr 5 19:43:42 2006 From: alberto.botti at yoda2000.net (ath) Date: Wed, 05 Apr 2006 19:43:42 -0000 Subject: [Bug 31527] Re: DRI locks up the machine when starting X on a Radeon 9250 References: <20060215163856.15884.24165.malonedeb@gangotri.ubuntu.com> Message-ID: <20060405194342.32313.88893.malone@gandwana.ubuntu.com> > Usually this ATI card has a lot of problems with Ubuntu. The card is working perfectly with many other distributions (and even different OSs), including heavy 3D games, so it isn't an hardware problem, just a driver bug. And I can't even get the fglrx driver shipped with Dapper to work, the system just locks up in a similar way (but I'm known to hate binary drivers anyway :)). The RV280 is one of the better supported cards under Linux using only free drivers, it's a pity it doesn't work with Dapper just because of a patch altready accepted in mainline... -- DRI locks up the machine when starting X on a Radeon 9250 https://launchpad.net/malone/bugs/31527 From asraniel at fryx.ch Wed Apr 5 19:47:06 2006 From: asraniel at fryx.ch (Asraniel) Date: Wed, 05 Apr 2006 19:47:06 -0000 Subject: [Bug 38263] freeze at startup References: <20060405194706.24486.46138.malonedeb@gangotri.ubuntu.com> Message-ID: <20060405194706.24486.46138.malonedeb@gangotri.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 linux-image-2.6.15-20-386 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: when booting with the latest dapper kernel this computer: Barebone: Shuttle XPC ST20G5, ATI Radeon Express 200, Socket 939 CPU: AMD Athlon 64 3200+ BOX, Socket 939, Venice GPU: Asus N6200/TD, Geforce 6200, 128MB, DVI, TV-out, low profile RAM: Corsair ValueSelect 512MB DDR-DIMM PC3200 C2.5 HD: Samsung SP2004C, SpinPoint P120, 7200rpm, 200GB, SATA-II CD/DVD Laufwerk: NEC ND-4550 silber, 16x DVD±RW Writer, Double-Layer, Bulk freezes after this error messages: Uncompressing Linux...Ok, booting the kernel. [4294671.433000]..MP-BIOS bug: 8254 timer not connected to IO-APIC [4294671.433000] PCI: Cannot allocate resource of region 3 of device 0000:00:00.0 [4294671.433000] PCI: Cannot allocate resource of region 3 of device 0000:01:00.0 [4294671.433000] PCI: Cannot allocate resource of region 0 of device 0000:02:00.0 after looking at the changelog, perhaps this patch is responsible for it? * 33704: Better patch for ATI IO-APIC timer bugginess. -- freeze at startup https://launchpad.net/malone/bugs/38263 From mdz at ubuntu.com Wed Apr 5 19:49:00 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Wed, 05 Apr 2006 19:49:00 -0000 Subject: [Bug 33869] Re: NETDEV WATCHDOG: wlan0: transmit timed out References: <20060306105112.3720.50330.malonedeb@gandwana.ubuntu.com> Message-ID: <20060405194900.24516.62728.launchpad@gangotri.ubuntu.com> ** Changed in: linux-source-2.6.15 (Ubuntu) Assignee: (unassigned) => Ben Collins -- NETDEV WATCHDOG: wlan0: transmit timed out https://launchpad.net/malone/bugs/33869 From mdz at ubuntu.com Wed Apr 5 19:49:40 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Wed, 05 Apr 2006 19:49:40 -0000 Subject: [Bug 33854] Re: Compile fails with CONFIG_NOHIGHMEM=y References: <20060306021739.22140.97859.malonedeb@gandwana.ubuntu.com> Message-ID: <20060405194940.32313.98142.launchpad@gandwana.ubuntu.com> ** Changed in: linux-source-2.6.15 (Ubuntu) Assignee: (unassigned) => Ben Collins -- Compile fails with CONFIG_NOHIGHMEM=y https://launchpad.net/malone/bugs/33854 From mdz at ubuntu.com Wed Apr 5 19:45:27 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Wed, 05 Apr 2006 19:45:27 -0000 Subject: [Bug 33716] Re: System freeze with [SiS] USB 2.0 References: <20060304164103.22115.35400.malonedeb@gandwana.ubuntu.com> Message-ID: <20060405194527.32313.24159.launchpad@gandwana.ubuntu.com> ** Bug watch added: Red Hat Bugzilla #149171 https://bugzilla.redhat.com/bugzilla//show_bug.cgi?id=149171 ** Changed in: libusb (Ubuntu) Sourcepackagename: libusb => linux-source-2.6.15 Assignee: (unassigned) => Ben Collins -- System freeze with [SiS] USB 2.0 https://launchpad.net/malone/bugs/33716 From mcpolu at gmail.com Wed Apr 5 19:54:41 2006 From: mcpolu at gmail.com (McPolu) Date: Wed, 05 Apr 2006 19:54:41 -0000 Subject: [Bug 35703] Fixed :) References: <20060320113114.8195.71315.malonedeb@gandwana.ubuntu.com> Message-ID: <20060405195441.32313.98476.malone@gandwana.ubuntu.com> Today I upgraded to kernel 2.6.15-20 and it works. It loads the rigth firmware now :D I think we should leave this defect still open. When you release a new .iso file including last changes, I will do a clean install and I will test it again. Thank you very much. -- Alternative firmware needed for LG LW5400N wifi card based on TI acx111 https://launchpad.net/malone/bugs/35703 From ben.collins at ubuntu.com Wed Apr 5 20:03:24 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Wed, 05 Apr 2006 20:03:24 -0000 Subject: [Bug 24801] Re: Onboard Ethernet on ASRock 939DUAL-SATA2 not working References: <20060113143053.21012.33190.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060405200324.32233.10627.malone@gandwana.ubuntu.com> Yes, it was fixed. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Confirmed => Fix Released -- Onboard Ethernet on ASRock 939DUAL-SATA2 not working https://launchpad.net/malone/bugs/24801 From mdz at ubuntu.com Wed Apr 5 20:05:42 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Wed, 05 Apr 2006 20:05:42 -0000 Subject: [Bug 33646] Re: USB References: <20060304024059.17498.59692.malonedeb@gangotri.ubuntu.com> Message-ID: <20060405200542.32233.6119.launchpad@gandwana.ubuntu.com> ** Changed in: linux-source-2.6.15 kernel-image-2.6.15-15-386-di (Ubuntu) Binarypackagename: kernel-image-2.6.15-15-386-di => None Assignee: (unassigned) => Ben Collins -- USB https://launchpad.net/malone/bugs/33646 From ben.collins at ubuntu.com Wed Apr 5 20:05:49 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Wed, 05 Apr 2006 20:05:49 -0000 Subject: [Bug 25922] Re: Large clock skew with dual-core amd64 References: <20060113144658.21012.7149.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060405200550.32313.45522.malone@gandwana.ubuntu.com> Thanks. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Needs Info => Fix Released -- Large clock skew with dual-core amd64 https://launchpad.net/malone/bugs/25922 From launchpad at news.mh.hampelnet.de Wed Apr 5 20:11:11 2006 From: launchpad at news.mh.hampelnet.de (Matthias Hampel) Date: Wed, 05 Apr 2006 20:11:11 -0000 Subject: [Bug 33230] Re: sky2 hangs on large data transfers (upstream fix available) References: <20060301081029.22115.81038.malonedeb@gandwana.ubuntu.com> Message-ID: <20060405201111.32313.52375.malone@gandwana.ubuntu.com> I also have problems with this driver (Mainboard ASUS P5WDG2-WS) on heavy activity and would appreciate a fix very much! The network hangs completely. -- sky2 hangs on large data transfers (upstream fix available) https://launchpad.net/malone/bugs/33230 From dicicat at free.fr Wed Apr 5 20:21:09 2006 From: dicicat at free.fr (DiCiCat) Date: Wed, 05 Apr 2006 20:21:09 -0000 Subject: [Bug 38273] new driver islsm don't work with isl3886 wireless card References: <20060405202109.32233.72666.malonedeb@gandwana.ubuntu.com> Message-ID: <20060405202109.32233.72666.malonedeb@gandwana.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 linux-image-2.6.15-20-686 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: the system detect an isl3886 based card, load the islsm_pci, islsm_device and islsm modules but nothing more append. A dmesg give an error message unable to load firmware isl3886 , error -2 no firmware isl3886 in /lib/firmware/2.6.15-20-686 -- new driver islsm don't work with isl3886 wireless card https://launchpad.net/malone/bugs/38273 From mdz at ubuntu.com Wed Apr 5 20:22:47 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Wed, 05 Apr 2006 20:22:47 -0000 Subject: [Bug 33934] Re: USB key works in Breezy not in Dapper References: <20060306212812.9003.74492.malonedeb@gandwana.ubuntu.com> Message-ID: <20060405202247.24486.14956.launchpad@gangotri.ubuntu.com> ** Changed in: linux-source-2.6.15 (Ubuntu) Assignee: (unassigned) => Ben Collins -- USB key works in Breezy not in Dapper https://launchpad.net/malone/bugs/33934 From mdz at ubuntu.com Wed Apr 5 20:25:38 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Wed, 05 Apr 2006 20:25:38 -0000 Subject: [Bug 34022] Re: via-rhine load fails with error -5 References: <20060307223747.26210.58166.malonedeb@gangotri.ubuntu.com> Message-ID: <20060405202538.32233.95228.launchpad@gandwana.ubuntu.com> ** Changed in: linux-source-2.6.15 (Ubuntu) Assignee: (unassigned) => Ben Collins -- via-rhine load fails with error -5 https://launchpad.net/malone/bugs/34022 From dicicat at free.fr Wed Apr 5 20:32:44 2006 From: dicicat at free.fr (DiCiCat) Date: Wed, 05 Apr 2006 20:32:44 -0000 Subject: [Bug 38273] Re: new driver islsm don't work with isl3886 wireless card References: <20060405202109.32233.72666.malonedeb@gandwana.ubuntu.com> Message-ID: <20060405203245.32313.55467.malone@gandwana.ubuntu.com> complete error message in dmesg is: [4294714.357000] islusb: Request firmware for 'isl3886' failed: -2 [4294714.358000] eth2: could not upload firmware ('isl3886') [4294714.358000] eth2: islpci_reset: failure [4294714.408000] islusb: unable to boot device [4294717.697000] islusb: Request firmware for 'isl3886' failed: -2 [4294717.697000] eth2: could not upload firmware ('isl3886') [4294717.697000] eth2: islpci_reset: failure [4294717.747000] islusb: unable to boot device ** Changed in: linux-source-2.6.15 linux-image-2.6.15-20-686 (Ubuntu) Priority: None => Medium -- new driver islsm don't work with isl3886 wireless card https://launchpad.net/malone/bugs/38273 From benjamin.dauvergne at gmail.com Wed Apr 5 20:41:11 2006 From: benjamin.dauvergne at gmail.com (Benjamin Dauvergne) Date: Wed, 05 Apr 2006 20:41:11 -0000 Subject: [Bug 34067] Opendir allocate 131Kb by directory opened References: <20060308120028.14318.29993.malonedeb@gangotri.ubuntu.com> Message-ID: <20060405204111.32313.48981.launchpad@canonical@gandwana.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: I'm using dapper, glibc 2.3.6-ubuntu8. Using this code http://benjamin.dauvergne.free.fr/testdiropen.c compiled with gcc -DGLIBC -o testdiropen testdiropen.c and launched like this ./testdiropen 10 I get that opendir is making malloc of 131Kb, using dietlibc or testing with a fedora i get malloc of 4Kb. Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: I'm using dapper, glibc 2.3.6-ubuntu8. Using this code http://benjamin.dauvergne.free.fr/testdiropen.c compiled with gcc -DGLIBC -o testdiropen testdiropen.c and launched like this ./testdiropen 10 I get that opendir is making malloc of 131Kb, using dietlibc or testing with a fedora i get malloc of 4Kb. -- Opendir allocate 131Kb by directory opened https://launchpad.net/malone/bugs/34067 From jani at ubuntu.com Wed Apr 5 20:42:08 2006 From: jani at ubuntu.com (Jani Monoses) Date: Wed, 05 Apr 2006 20:42:08 -0000 Subject: [Bug 34066] usb mouse dead on resume References: <20060308112717.14318.84205.malonedeb@gangotri.ubuntu.com> Message-ID: <20060405204208.24516.69237.launchpad@canonical@gangotri.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: On a HP nx8220 laptop there's a problem with usb and suspend. The situation in which the mouse does ot work is resuming from hiberate _after_ a previous suspend/resume to RAM. A suspend/resume to RAM brings the mouse back always. Resume from hibernate leaves it in a working state only after a reboot. So it seems suspend to RAM does something to usb which breaks resume from disk in usb's case. The lines hci_usb 2-2:1.1: no suspend for driver hci_usb? and hci_usb 2-2:1.0: no resume for driver hci_usb? appear in dmesg before/after both types of suspend/resuming but STR does not seem to be affected by it. The problem is solved if I uncomment the usb modules part in /etc/acpi/prepare.sh. Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: On a HP nx8220 laptop there's a problem with usb and suspend. The situation in which the mouse does ot work is resuming from hiberate _after_ a previous suspend/resume to RAM. A suspend/resume to RAM brings the mouse back always. Resume from hibernate leaves it in a working state only after a reboot. So it seems suspend to RAM does something to usb which breaks resume from disk in usb's case. The lines hci_usb 2-2:1.1: no suspend for driver hci_usb? and hci_usb 2-2:1.0: no resume for driver hci_usb? appear in dmesg before/after both types of suspend/resuming but STR does not seem to be affected by it. The problem is solved if I uncomment the usb modules part in /etc/acpi/prepare.sh. -- usb mouse dead on resume https://launchpad.net/malone/bugs/34066 From vetsel.patrice at wanadoo.fr Wed Apr 5 20:39:26 2006 From: vetsel.patrice at wanadoo.fr (VETSEL Patrice) Date: Wed, 05 Apr 2006 20:39:26 -0000 Subject: [Bug 38278] wifi card don't work. isl3886 is required but not installed References: <20060405203926.24486.7083.malonedeb@gangotri.ubuntu.com> Message-ID: <20060405203926.24486.7083.malonedeb@gangotri.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Assignee: Matthew Garrett Status: Unconfirmed Description: Since upgrade from linux-source 2.6.15-19 to 2.6.15-20 islsm_pci is used instead of prism54. Since hoary prism54 used the isl3890 firmware (provided) and wifi card works. Now in /var/log/syslog islsm_pci complain about the lack of isl3886 # Apr 5 20:58:03 localhost firmware_helper[5681]: main: error loading '/lib/firmware/isl3886' for device '/class/firmware/0000:00:0a.0' with driver 'islsm_pci' # Apr 5 20:58:03 localhost kernel: [4294968.012000] islusb: Request firmware for 'isl3886' failed: -2 # Apr 5 20:58:03 localhost kernel: [4294968.012000] eth0: could not upload firmware ('isl3886') # Apr 5 20:58:03 localhost kernel: [4294968.012000] eth0: islpci_reset: failure # Apr 5 20:58:03 localhost kernel: [4294968.063000] islusb: unable to boot device # Apr 5 21:00:06 localhost firmware_helper[5732]: main: error loading '/lib/firmware/isl3886' for device '/class/firmware/0000:00:0a.0' with driver 'islsm_pci' # Apr 5 21:00:06 localhost kernel: [4295091.210000] islusb: Request firmware for 'isl3886' failed: -2 # Apr 5 21:00:06 localhost kernel: [4295091.210000] eth0: could not upload firmware ('isl3886') # Apr 5 21:00:06 localhost kernel: [4295091.210000] eth0: islpci_reset: failure # Apr 5 21:00:06 localhost kernel: [4295091.260000] islusb: unable to boot device ** Changed in: linux-source-2.6.15 (Ubuntu) Assignee: (unassigned) => Matthew Garrett -- wifi card don't work. isl3886 is required but not installed https://launchpad.net/malone/bugs/38278 From mdz at ubuntu.com Wed Apr 5 20:41:44 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Wed, 05 Apr 2006 20:41:44 -0000 Subject: [Bug 34067] Re: Opendir allocate 131Kb by directory opened References: <20060308120028.14318.29993.malonedeb@gangotri.ubuntu.com> Message-ID: <20060405204144.32233.23187.malone@gandwana.ubuntu.com> Ben, is this a bug? ** Changed in: glibc (Ubuntu) Sourcepackagename: glibc => linux-source-2.6.15 ** Summary changed: - Opendir allocate 131Kb by directory opened + reiserfs reports huge I/O block size? ** Changed in: linux-source-2.6.15 (Ubuntu) Assignee: (unassigned) => Ben Collins -- reiserfs reports huge I/O block size? https://launchpad.net/malone/bugs/34067 From mdz at ubuntu.com Wed Apr 5 20:42:08 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Wed, 05 Apr 2006 20:42:08 -0000 Subject: [Bug 34066] Re: usb mouse dead on resume References: <20060308112717.14318.84205.malonedeb@gangotri.ubuntu.com> Message-ID: <20060405204208.24516.36731.launchpad@gangotri.ubuntu.com> ** Changed in: acpi-support (Ubuntu) Sourcepackagename: acpi-support => linux-source-2.6.15 Binarypackagename: acpi-support => None -- usb mouse dead on resume https://launchpad.net/malone/bugs/34066 From mdz at ubuntu.com Wed Apr 5 20:40:08 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Wed, 05 Apr 2006 20:40:08 -0000 Subject: [Bug 34068] Re: USR5410 not working References: <20060308120049.10830.52259.malonedeb@gandwana.ubuntu.com> Message-ID: <20060405204008.24486.75224.launchpad@gangotri.ubuntu.com> ** Changed in: linux-source-2.6.15 nic-firmware-2.6.15-17-386-di (Ubuntu) Assignee: (unassigned) => Ben Collins -- USR5410 not working https://launchpad.net/malone/bugs/34068 From sdier at cs.umn.edu Wed Apr 5 20:54:53 2006 From: sdier at cs.umn.edu (Scott Dier) Date: Wed, 05 Apr 2006 20:54:53 -0000 Subject: [Bug 38280] md on the -server kernel reports wacky (overinflated) estimates on rebuilds References: <20060405205453.32313.91906.malonedeb@gandwana.ubuntu.com> Message-ID: <20060405205453.32313.91906.malonedeb@gandwana.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: Personalities : [raid5] md0 : active raid5 sdb1[0] sde1[3] sdd1[2] sdc1[1] 430115904 blocks level 5, 64k chunk, algorithm 2 [4/4] [UUUU] [======>..............] resync = 34.6% (49652544/143371968) finish=2.7min speed=563516K/sec 'actual' speed should be something closer to '12000K/sec'. Machine is dell poweredge 6600. [42949372.960000] Linux version 2.6.15-20-server (buildd at vernadsky) (gcc version 4.0.3 (Ubuntu 4.0.3-1ubuntu3)) #1 SMP Tue Apr 4 20:15:45 UTC 2006 [42949372.960000] BIOS-provided physical RAM map: [42949372.960000] BIOS-e820: 0000000000000000 - 00000000000a0000 (usable) [42949372.960000] BIOS-e820: 0000000000100000 - 00000000effe0000 (usable) [42949372.960000] BIOS-e820: 00000000effe0000 - 00000000effefc00 (ACPI data) [42949372.960000] BIOS-e820: 00000000effefc00 - 00000000effff000 (reserved) [42949372.960000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [42949372.960000] BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved) [42949372.960000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) [42949372.960000] BIOS-e820: 0000000100000000 - 0000000180000000 (usable) [42949372.960000] 5248MB HIGHMEM available. [42949372.960000] 896MB LOWMEM available. [42949372.960000] found SMP MP-table at 000fe710 [42949372.960000] On node 0 totalpages: 1572864 [42949372.960000] DMA zone: 4096 pages, LIFO batch:0 [42949372.960000] DMA32 zone: 0 pages, LIFO batch:0 [42949372.960000] Normal zone: 225280 pages, LIFO batch:31 [42949372.960000] HighMem zone: 1343488 pages, LIFO batch:31 [42949372.960000] DMI 2.3 present. [42949372.960000] ACPI: RSDP (v000 DELL ) @ 0x000fdc00 [42949372.960000] ACPI: RSDT (v001 DELL PE6600 0x00000001 MSFT 0x0100000a) @ 0x000fdc14 [42949372.960000] ACPI: FADT (v001 DELL PE6600 0x00000001 MSFT 0x0100000a) @ 0x000fdc44 [42949372.960000] ACPI: MADT (v001 DELL PE6600 0x00000001 MSFT 0x0100000a) @ 0x000fdcb8 [42949372.960000] ACPI: SPCR (v001 DELL PE6600 0x00000001 MSFT 0x0100000a) @ 0x000fdd78 [42949372.960000] ACPI: DSDT (v001 DELL PE6600 0x00000001 MSFT 0x0100000a) @ 0x00000000 [42949372.960000] ACPI: PM-Timer IO Port: 0x808 [42949372.960000] ACPI: Local APIC address 0xfee00000 [42949372.960000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [42949372.960000] Processor #0 15:2 APIC version 20 [42949372.960000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [42949372.960000] Processor #2 15:2 APIC version 20 [42949372.960000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled) [42949372.960000] Processor #4 15:2 APIC version 20 [42949372.960000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled) [42949372.960000] Processor #6 15:2 APIC version 20 [42949372.960000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled) [42949372.960000] Processor #1 15:2 APIC version 20 [42949372.960000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled) [42949372.960000] Processor #3 15:2 APIC version 20 [42949372.960000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled) [42949372.960000] Processor #5 15:2 APIC version 20 [42949372.960000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled) [42949372.960000] Processor #7 15:2 APIC version 20 [42949372.960000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [42949372.960000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [42949372.960000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [42949372.960000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) [42949372.960000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) [42949372.960000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) [42949372.960000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) [42949372.960000] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1]) [42949372.960000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) [42949372.960000] IOAPIC[0]: apic_id 8, version 17, address 0xfec00000, GSI 0-15[42949372.960000] ACPI: IOAPIC (id[0x09] address[0xfec01000] gsi_base[16]) [42949372.960000] IOAPIC[1]: apic_id 9, version 17, address 0xfec01000, GSI 16-31 [42949372.960000] ACPI: IOAPIC (id[0x0a] address[0xfec02000] gsi_base[32]) [42949372.960000] IOAPIC[2]: apic_id 10, version 17, address 0xfec02000, GSI 32-47 [42949372.960000] ACPI: IRQ9 used by override. [42949372.960000] Enabling APIC mode: Flat. Using 3 I/O APICs [42949372.960000] Using ACPI (MADT) for SMP configuration information [42949372.960000] Allocating PCI resources starting at f0000000 (gap: effff000:0ec01000) [42949372.960000] Built 1 zonelists [42949372.960000] Kernel command line: root=/dev/sda1 ro quiet splash [42949372.960000] mapped APIC to ffffd000 (fee00000) [42949372.960000] mapped IOAPIC to ffffc000 (fec00000) [42949372.960000] mapped IOAPIC to ffffb000 (fec01000) [42949372.960000] mapped IOAPIC to ffffa000 (fec02000) [42949372.960000] Initializing CPU#0 [42949372.960000] PID hash table entries: 4096 (order: 12, 65536 bytes) [42949372.960000] Detected 1993.621 MHz processor. [42949372.960000] Using pmtmr for high-res timesource [42949372.960000] Console: colour VGA+ 80x25 [42949376.260000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [42949376.260000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)[42949376.880000] Memory: 5967592k/6291456k available (2067k kernel code, 60328k reserved, 616k data, 332k init, 5111680k highmem) [42949376.880000] Checking if this processor honours the WP bit even in supervisor mode... Ok. [42949377.030000] Calibrating delay using timer specific routine.. 3991.08 BogoMIPS (lpj=19955400) [42949377.030000] Security Framework v1.0.0 initialized [42949377.030000] SELinux: Disabled at boot. [42949377.030000] Mount-cache hash table entries: 512 [42949377.030000] CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000 [42949377.030000] CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000 [42949377.030000] CPU: Trace cache: 12K uops, L1 D cache: 8K [42949377.030000] CPU: L2 cache: 512K [42949377.030000] CPU: L3 cache: 1024K [42949377.030000] CPU: Hyper-Threading is disabled [42949377.030000] CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 00004400 00000000 00000000 [42949377.030000] mtrr: v2.0 (20020519) [42949377.030000] Enabling fast FPU save and restore... done. [42949377.030000] Enabling unmasked SIMD FPU exception support... done. [42949377.030000] Checking 'hlt' instruction... OK. [42949377.070000] checking if image is initramfs... it is [42949377.690000] Freeing initrd memory: 6541k freed [42949377.700000] ACPI: Looking for DSDT ... not found! [42949377.800000] CPU0: Intel(R) Xeon(TM) MP CPU 2.00GHz stepping 05 [42949377.800000] Booting processor 1/1 eip 3000 [42949377.810000] Initializing CPU#1 [42949377.960000] Calibrating delay using timer specific routine.. 3987.19 BogoMIPS (lpj=19935960) [42949377.960000] CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000 [42949377.960000] CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000 [42949377.960000] CPU: Trace cache: 12K uops, L1 D cache: 8K [42949377.960000] CPU: L2 cache: 512K [42949377.960000] CPU: L3 cache: 1024K [42949377.960000] CPU: Hyper-Threading is disabled [42949377.960000] CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 00004400 00000000 00000000 [42949377.960000] CPU1: Intel(R) Xeon(TM) MP CPU 2.00GHz stepping 05 [42949377.960000] Booting processor 2/2 eip 3000 [42949377.970000] Initializing CPU#2 [42949378.120000] Calibrating delay using timer specific routine.. 3987.40 BogoMIPS (lpj=19937014) [42949378.120000] CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000 [42949378.120000] CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000 [42949378.120000] CPU: Trace cache: 12K uops, L1 D cache: 8K [42949378.120000] CPU: L2 cache: 512K [42949378.120000] CPU: L3 cache: 1024K [42949378.120000] CPU: Hyper-Threading is disabled [42949378.120000] CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 00004400 00000000 00000000 [42949378.120000] CPU2: Intel(R) Xeon(TM) MP CPU 2.00GHz stepping 05 [42949378.120000] Booting processor 3/3 eip 3000 [42949378.130000] Initializing CPU#3 [42949378.280000] Calibrating delay using timer specific routine.. 3987.38 BogoMIPS (lpj=19936947) [42949378.280000] CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000 [42949378.280000] CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000 [42949378.280000] CPU: Trace cache: 12K uops, L1 D cache: 8K [42949378.280000] CPU: L2 cache: 512K [42949378.280000] CPU: L3 cache: 1024K [42949378.280000] CPU: Hyper-Threading is disabled [42949378.280000] CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 00004400 00000000 00000000 [42949378.280000] CPU3: Intel(R) Xeon(TM) MP CPU 2.00GHz stepping 05 [42949378.280000] Booting processor 4/4 eip 3000 [42949378.290000] Initializing CPU#4 [42949378.440000] Calibrating delay using timer specific routine.. 3987.33 BogoMIPS (lpj=19936684) [42949378.440000] CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000 [42949378.440000] CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000 [42949378.440000] CPU: Trace cache: 12K uops, L1 D cache: 8K [42949378.440000] CPU: L2 cache: 512K [42949378.440000] CPU: L3 cache: 1024K [42949378.440000] CPU: Hyper-Threading is disabled [42949378.440000] CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 00004400 00000000 00000000 [42949378.440000] CPU4: Intel(R) Xeon(TM) MP CPU 2.00GHz stepping 05 [42949378.440000] Booting processor 5/5 eip 3000 [42949378.450000] Initializing CPU#5 [42949378.600000] Calibrating delay using timer specific routine.. 3987.45 BogoMIPS (lpj=19937284) [42949378.600000] CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000 [42949378.600000] CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000 [42949378.600000] CPU: Trace cache: 12K uops, L1 D cache: 8K [42949378.600000] CPU: L2 cache: 512K [42949378.600000] CPU: L3 cache: 1024K [42949378.600000] CPU: Hyper-Threading is disabled [42949378.600000] CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 00004400 00000000 00000000 [42949378.600000] CPU5: Intel(R) Xeon(TM) MP CPU 2.00GHz stepping 05 [42949378.600000] Booting processor 6/6 eip 3000 [42949378.610000] Initializing CPU#6 [42949378.760000] Calibrating delay using timer specific routine.. 3987.28 BogoMIPS (lpj=19936426) [42949378.760000] CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000 [42949378.760000] CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000 [42949378.760000] CPU: Trace cache: 12K uops, L1 D cache: 8K [42949378.760000] CPU: L2 cache: 512K [42949378.760000] CPU: L3 cache: 1024K [42949378.760000] CPU: Hyper-Threading is disabled [42949378.760000] CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 00004400 00000000 00000000 [42949378.760000] CPU6: Intel(R) Xeon(TM) MP CPU 2.00GHz stepping 05 [42949378.760000] Booting processor 7/7 eip 3000 [42949378.770000] Initializing CPU#7 [42949378.920000] Calibrating delay using timer specific routine.. 3987.24 BogoMIPS (lpj=19936240) [42949378.920000] CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000 [42949378.920000] CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000 [42949378.920000] CPU: Trace cache: 12K uops, L1 D cache: 8K [42949378.920000] CPU: L2 cache: 512K [42949378.920000] CPU: L3 cache: 1024K [42949378.920000] CPU: Hyper-Threading is disabled [42949378.920000] CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 00004400 00000000 00000000 [42949378.920000] CPU7: Intel(R) Xeon(TM) MP CPU 2.00GHz stepping 05 [42949378.920000] Total of 8 processors activated (31902.39 BogoMIPS). [42949378.920000] ENABLING IO-APIC IRQs [42949378.920000] ..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1 [42949379.130000] checking TSC synchronization across 8 CPUs: [42949379.130000] CPU#7 had 0 usecs TSC skew, fixed it up. [42949379.200000] Brought up 8 CPUs [42949379.200000] NET: Registered protocol family 16 [42949379.200000] EISA bus registered [42949379.200000] ACPI: bus type pci registered [42949379.200000] PCI: PCI BIOS revision 2.10 entry at 0xfc65a, last bus=24 [42949379.200000] PCI: Using configuration type 1 [42949379.210000] ACPI: Subsystem revision 20051216 [42949379.230000] ACPI: Interpreter enabled [42949379.230000] ACPI: Using IOAPIC for interrupt routing [42949379.230000] ACPI: PCI Root Bridge [PCI0] (0000:00) [42949379.230000] PCI: Probing PCI hardware (bus 00) [42949379.290000] Boot video device is 0000:00:04.0 [42949379.290000] PCI: Ignoring BAR0-3 of IDE controller 0000:00:0f.1 [42949379.290000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [42949379.340000] ACPI: PCI Root Bridge [PCI1] (0000:03) [42949379.340000] PCI: Probing PCI hardware (bus 03) [42949379.390000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1._PRT] [42949379.400000] ACPI: PCI Root Bridge [PCI2] (0000:08) [42949379.400000] PCI: Probing PCI hardware (bus 08) [42949379.450000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI2._PRT] [42949379.450000] ACPI: PCI Root Bridge [PCI3] (0000:09) [42949379.450000] PCI: Probing PCI hardware (bus 09) [42949379.510000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI3._PRT] [42949379.520000] ACPI: PCI Root Bridge [PCI4] (0000:0e) [42949379.520000] PCI: Probing PCI hardware (bus 0e) [42949379.560000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI4._PRT] [42949379.570000] ACPI: PCI Root Bridge [PCI5] (0000:13) [42949379.570000] PCI: Probing PCI hardware (bus 13) [42949379.620000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI5._PRT] [42949379.620000] ACPI: PCI Root Bridge [PCI6] (0000:18) [42949379.620000] PCI: Probing PCI hardware (bus 18) [42949379.670000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI6._PRT] [42949379.680000] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 *11 12 14) [42949379.680000] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 *5 6 7 9 10 11 12 14) [42949379.680000] ACPI: PCI Interrupt Link [LNK2] (IRQs *3 4 5 6 7 9 10 11 12 14) [42949379.680000] ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled. [42949379.690000] ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled. [42949379.690000] ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled. [42949379.690000] ACPI: PCI Interrupt Link [LNK6] (IRQs 3 4 5 6 *7 9 10 11 12 14) [42949379.690000] ACPI: PCI Interrupt Link [LNK7] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled. [42949379.690000] ACPI: PCI Interrupt Link [LNK8] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled. [42949379.690000] ACPI: PCI Interrupt Link [LNK9] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled. [42949379.700000] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled. [42949379.700000] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled. [42949379.700000] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled. [42949379.700000] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled. [42949379.700000] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled. [42949379.700000] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled. [42949379.710000] ACPI: PCI Interrupt Link [LK10] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled. [42949379.710000] ACPI: PCI Interrupt Link [LK11] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled. [42949379.710000] ACPI: PCI Interrupt Link [LK12] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled. [42949379.710000] ACPI: PCI Interrupt Link [LK13] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled. [42949379.710000] ACPI: PCI Interrupt Link [LK14] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled. [42949379.710000] ACPI: PCI Interrupt Link [LK15] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled. [42949379.710000] ACPI: PCI Interrupt Link [LK16] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled. [42949379.720000] ACPI: PCI Interrupt Link [LK17] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled. [42949379.720000] ACPI: PCI Interrupt Link [LK18] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled. [42949379.720000] ACPI: PCI Interrupt Link [LK19] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled. [42949379.720000] ACPI: PCI Interrupt Link [LK1A] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled. [42949379.720000] ACPI: PCI Interrupt Link [LK1B] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled. [42949379.720000] ACPI: PCI Interrupt Link [LK1C] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled. [42949379.730000] ACPI: PCI Interrupt Link [LK1D] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled. [42949379.730000] ACPI: PCI Interrupt Link [LK1E] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled. [42949379.730000] ACPI: PCI Interrupt Link [LK1F] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled. [42949379.730000] ACPI: PCI Interrupt Link [LUSB] (IRQs 3 4 5 6 7 *10 11 12 14) [42949379.730000] Linux Plug and Play Support v0.97 (c) Adam Belay [42949379.730000] pnp: PnP ACPI init [42949379.780000] pnp: PnP ACPI: found 8 devices [42949379.780000] PnPBIOS: Disabled by ACPI PNP [42949379.780000] PCI: Using ACPI for IRQ routing [42949379.780000] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [42949379.810000] pnp: 00:07: ioport range 0x800-0x87f could not be reserved [42949379.810000] pnp: 00:07: ioport range 0x8a0-0x8af has been reserved [42949379.810000] pnp: 00:07: ioport range 0x8e0-0x8e3 has been reserved [42949379.810000] pnp: 00:07: ioport range 0xc00-0xcd7 has been reserved [42949379.810000] pnp: 00:07: ioport range 0xf50-0xf58 has been reserved [42949379.810000] audit: initializing netlink socket (disabled) [42949379.810000] audit(1144267756.800:1): initialized [42949379.810000] highmem bounce pool size: 64 pages [42949379.810000] VFS: Disk quotas dquot_6.5.1 [42949379.810000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [42949379.810000] Initializing Cryptographic API [42949379.810000] io scheduler noop registered [42949379.810000] io scheduler anticipatory registered [42949379.810000] io scheduler deadline registered [42949379.810000] io scheduler cfq registered [42949379.810000] isapnp: Scanning for PnP cards... [42949380.170000] isapnp: No Plug & Play device found [42949380.200000] PNP: PS/2 Controller [PNP0303:KBD] at 0x60,0x64 irq 1 [42949380.200000] PNP: PS/2 controller doesn't have AUX irq; using default 12 [42949380.200000] serio: i8042 AUX port at 0x60,0x64 irq 12 [42949380.200000] serio: i8042 KBD port at 0x60,0x64 irq 1 [42949380.200000] Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled [42949380.200000] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [42949380.200000] 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [42949380.200000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [42949380.200000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [42949380.200000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [42949380.200000] ACPI: bus type ide registered [42949380.200000] mice: PS/2 mouse device common for all mice [42949380.200000] EISA: Probing bus 0 at eisa.0 [42949380.200000] EISA: Cannot allocate resource for mainboard [42949380.200000] EISA: Detected 0 cards. [42949380.200000] NET: Registered protocol family 2 [42949380.280000] input: AT Translated Set 2 keyboard as /class/input/input0 [42949380.370000] IP route cache hash table entries: 262144 (order: 8, 1048576 bytes) [42949380.370000] TCP established hash table entries: 524288 (order: 10, 4194304 bytes) [42949380.370000] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [42949380.370000] TCP: Hash tables configured (established 524288 bind 65536) [42949380.370000] TCP reno registered [42949380.370000] TCP bic registered [42949380.370000] NET: Registered protocol family 1 [42949380.370000] NET: Registered protocol family 8 [42949380.370000] NET: Registered protocol family 20 [42949380.370000] Starting balanced_irq [42949380.370000] Using IPI No-Shortcut mode [42949380.370000] ACPI wakeup devices: [42949380.370000] [42949380.370000] ACPI: (supports S0 S4 S5) [42949380.370000] Freeing unused kernel memory: 332k freed [42949380.430000] Capability LSM initialized [42949381.190000] SCSI subsystem initialized [42949381.200000] ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 16 (level, low) -> IRQ 177 [42949396.420000] scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0 [42949396.420000] [42949396.420000] aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs [42949396.420000] [42949396.430000] Vendor: SEAGATE Model: ST336607LC Rev: DS09 [42949396.430000] Type: Direct-Access ANSI SCSI revision: 03 [42949396.430000] scsi0:A:0:0: Tagged Queuing enabled. Depth 8 [42949396.430000] target0:0:0: Beginning Domain Validation [42949396.430000] target0:0:0: wide asynchronous. [42949396.430000] target0:0:0: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 63) [42949396.440000] target0:0:0: Ending Domain Validation [42949396.440000] Vendor: IBM Model: IC35L146UCDY10-0 Rev: S27F [42949396.440000] Type: Direct-Access ANSI SCSI revision: 03 [42949396.440000] scsi0:A:1:0: Tagged Queuing enabled. Depth 8 [42949396.440000] target0:0:1: Beginning Domain Validation [42949396.440000] target0:0:1: wide asynchronous. [42949396.440000] target0:0:1: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 127) [42949396.450000] target0:0:1: Ending Domain Validation [42949396.450000] Vendor: IBM Model: IC35L146UCDY10-0 Rev: S27F [42949396.450000] Type: Direct-Access ANSI SCSI revision: 03 [42949396.450000] scsi0:A:2:0: Tagged Queuing enabled. Depth 8 [42949396.450000] target0:0:2: Beginning Domain Validation [42949396.450000] target0:0:2: wide asynchronous. [42949396.450000] target0:0:2: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 127) [42949396.460000] target0:0:2: Ending Domain Validation [42949396.460000] Vendor: IBM Model: IC35L146UCDY10-0 Rev: S27F [42949396.460000] Type: Direct-Access ANSI SCSI revision: 03 [42949396.460000] scsi0:A:3:0: Tagged Queuing enabled. Depth 8 [42949396.460000] target0:0:3: Beginning Domain Validation [42949396.460000] target0:0:3: wide asynchronous. [42949396.460000] target0:0:3: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 127) [42949396.470000] target0:0:3: Ending Domain Validation [42949396.470000] Vendor: IBM Model: IC35L146UCDY10-0 Rev: S27F [42949396.470000] Type: Direct-Access ANSI SCSI revision: 03 [42949396.470000] scsi0:A:4:0: Tagged Queuing enabled. Depth 8 [42949396.470000] target0:0:4: Beginning Domain Validation [42949396.470000] target0:0:4: wide asynchronous. [42949396.470000] target0:0:4: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 127) [42949396.480000] target0:0:4: Ending Domain Validation [42949396.750000] Vendor: PE/PV Model: 1x8 SCSI BP Rev: 1.1 [42949396.750000] Type: Processor ANSI SCSI revision: 02 [42949396.750000] target0:0:6: Beginning Domain Validation [42949396.790000] target0:0:6: Ending Domain Validation [42949398.890000] SCSI device sda: 71132959 512-byte hdwr sectors (36420 MB) [42949398.890000] SCSI device sda: drive cache: write through [42949398.890000] SCSI device sda: 71132959 512-byte hdwr sectors (36420 MB) [42949398.890000] SCSI device sda: drive cache: write through [42949398.890000] sda: sda1 sda2 [42949398.910000] sd 0:0:0:0: Attached scsi disk sda [42949398.910000] SCSI device sdb: 286749480 512-byte hdwr sectors (146816 MB) [42949398.910000] SCSI device sdb: drive cache: write through [42949398.910000] SCSI device sdb: 286749480 512-byte hdwr sectors (146816 MB) [42949398.920000] SCSI device sdb: drive cache: write through [42949398.920000] sdb: sdb1 [42949398.930000] sd 0:0:1:0: Attached scsi disk sdb [42949398.930000] SCSI device sdc: 286749480 512-byte hdwr sectors (146816 MB) [42949398.930000] SCSI device sdc: drive cache: write through [42949398.930000] SCSI device sdc: 286749480 512-byte hdwr sectors (146816 MB) [42949398.930000] SCSI device sdc: drive cache: write through [42949398.930000] sdc: sdc1 [42949398.940000] sd 0:0:2:0: Attached scsi disk sdc [42949398.940000] SCSI device sdd: 286749480 512-byte hdwr sectors (146816 MB) [42949398.940000] SCSI device sdd: drive cache: write through [42949398.940000] SCSI device sdd: 286749480 512-byte hdwr sectors (146816 MB) [42949398.940000] SCSI device sdd: drive cache: write through [42949398.940000] sdd: sdd1 [42949398.950000] sd 0:0:3:0: Attached scsi disk sdd [42949398.950000] SCSI device sde: 286749480 512-byte hdwr sectors (146816 MB) [42949398.950000] SCSI device sde: drive cache: write through [42949398.950000] SCSI device sde: 286749480 512-byte hdwr sectors (146816 MB) [42949398.950000] SCSI device sde: drive cache: write through [42949398.950000] sde: sde1 [42949398.960000] sd 0:0:4:0: Attached scsi disk sde [42949399.110000] SvrWks CSB5: IDE controller at PCI slot 0000:00:0f.1 [42949399.110000] SvrWks CSB5: chipset revision 147 [42949399.110000] SvrWks CSB5: not 100% native mode: will probe irqs later [42949399.110000] SvrWks CSB5: simplex device: DMA forced [42949399.110000] ide0: BM-DMA at 0x08b0-0x08b7, BIOS settings: hda:DMA, hdb:pio [42949399.110000] SvrWks CSB5: simplex device: DMA forced [42949399.110000] ide1: BM-DMA at 0x08b8-0x08bf, BIOS settings: hdc:DMA, hdd:DMA [42949399.110000] Probing IDE interface ide0... [42949399.910000] hda: TEAC CD-ROM CD-224E, ATAPI CD/DVD-ROM drive [42949400.640000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [42949400.640000] Probing IDE interface ide1... [42949401.260000] hda: ATAPI 24X CD-ROM drive, 128kB Cache, UDMA(33) [42949401.260000] Uniform CD-ROM driver Revision: 3.20 [42949401.300000] 3ware 9000 Storage Controller device driver for Linux v2.26.02.004. [42949401.300000] ACPI: PCI Interrupt 0000:03:02.0[A] -> GSI 22 (level, low) -> IRQ 185 [42949402.080000] scsi1 : 3ware 9000 Storage Controller [42949402.080000] 3w-9xxx: scsi1: Found a 3ware 9000 Storage Controller at 0xfcf00000, IRQ: 185. [42949402.440000] 3w-9xxx: scsi1: Firmware FE9X 2.06.00.009, BIOS BE9X 2.03.01.051, Ports: 4. [42949402.450000] Vendor: AMCC Model: 9500S-4LP DISK Rev: 2.06 [42949402.450000] Type: Direct-Access ANSI SCSI revision: 03 [42949402.450000] SCSI device sdf: 1757749248 512-byte hdwr sectors (899968 MB) [42949402.450000] SCSI device sdf: drive cache: write back, no read (daft) [42949402.450000] SCSI device sdf: 1757749248 512-byte hdwr sectors (899968 MB) [42949402.450000] SCSI device sdf: drive cache: write back, no read (daft) [42949402.450000] sdf: sdf1 [42949402.470000] sd 1:0:0:0: Attached scsi disk sdf [42949402.720000] usbcore: registered new driver usbfs [42949402.720000] usbcore: registered new driver hub [42949402.720000] ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) [42949402.720000] **** SET: Misaligned resource pointer: df85d9c2 Type 07 Len 0 [42949402.720000] ACPI: PCI Interrupt Link [LUSB] enabled at IRQ 10 [42949402.720000] ACPI: PCI Interrupt 0000:00:0f.2[A] -> Link [LUSB] -> GSI 10 (level, low) -> IRQ 10 [42949402.720000] ohci_hcd 0000:00:0f.2: OHCI Host Controller [42949402.750000] ohci_hcd 0000:00:0f.2: new USB bus registered, assigned bus number 1 [42949402.750000] ohci_hcd 0000:00:0f.2: irq 10, io mem 0xfe100000 [42949402.820000] hub 1-0:1.0: USB hub found [42949402.820000] hub 1-0:1.0: 2 ports detected [42949402.970000] Probing IDE interface ide1... [42949403.620000] raid5: automatically using best checksumming function: pIII_sse [42949403.670000] pIII_sse : 2594.400 MB/sec [42949403.670000] raid5: using function: pIII_sse (2594.400 MB/sec) [42949403.670000] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 [42949403.670000] md: bitmap version 4.39 [42949403.670000] md: raid5 personality registered as nr 4 [42949403.970000] md: md0 stopped. [42949403.990000] md: bind [42949404.000000] md: bind [42949404.000000] md: bind [42949404.010000] md: bind [42949404.010000] md: md0: raid array is not clean -- starting background reconstruction [42949404.010000] raid5: device sdb1 operational as raid disk 0 [42949404.010000] raid5: device sde1 operational as raid disk 3 [42949404.010000] raid5: device sdd1 operational as raid disk 2 [42949404.010000] raid5: device sdc1 operational as raid disk 1 [42949404.010000] raid5: allocated 4203kB for md0 [42949404.010000] raid5: raid level 5 set md0 active with 4 out of 4 devices, algorithm 2 [42949404.010000] RAID5 conf printout: [42949404.010000] --- rd:4 wd:4 fd:0 [42949404.010000] disk 0, o:1, dev:sdb1 [42949404.010000] disk 1, o:1, dev:sdc1 [42949404.010000] disk 2, o:1, dev:sdd1 [42949404.010000] disk 3, o:1, dev:sde1 [42949404.010000] md: syncing RAID array md0 [42949404.010000] md: minimum _guaranteed_ reconstruction speed: 1000 KB/sec/disc. [42949404.010000] md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for reconstruction. [42949404.010000] md: using 128k window, over a total of 143371968 blocks. [42949404.010000] md: resuming recovery of md0 from checkpoint. [42949404.050000] Attempting manual resume [42949404.090000] kjournald starting. Commit interval 5 seconds [42949404.090000] EXT3-fs: mounted filesystem with ordered data mode. [42949408.540000] sd 0:0:0:0: Attached scsi generic sg0 type 0 [42949408.540000] sd 0:0:1:0: Attached scsi generic sg1 type 0 [42949408.540000] sd 0:0:2:0: Attached scsi generic sg2 type 0 [42949408.540000] sd 0:0:3:0: Attached scsi generic sg3 type 0 [42949408.540000] sd 0:0:4:0: Attached scsi generic sg4 type 0 [42949408.540000] 0:0:6:0: Attached scsi generic sg5 type 3 [42949408.540000] sd 1:0:0:0: Attached scsi generic sg6 type 0 [42949409.270000] input: PC Speaker as /class/input/input1 [42949409.330000] tg3.c:v3.47 (Dec 28, 2005) [42949409.330000] ACPI: PCI Interrupt 0000:08:01.0[A] -> GSI 17 (level, low) -> IRQ 193 [42949410.070000] eth0: Tigon3 [partno(BCM95700A6) rev 7104 PHY(5411)] (PCI:66MHz:64-bit) 10/100/1000BaseT Ethernet 00:0d:56:70:ee:00 [42949410.070000] eth0: RXcsums[1] LinkChgREG[1] MIirq[1] ASF[0] Split[0] WireSpeed[0] TSOcap[0] [42949410.070000] eth0: dma_rwctrl[76ff000f] [42949410.070000] ACPI: PCI Interrupt 0000:08:02.0[A] -> GSI 18 (level, low) -> IRQ 201 [42949410.760000] eth1: Tigon3 [partno(BCM95700A6) rev 7104 PHY(5411)] (PCI:66MHz:64-bit) 10/100/1000BaseT Ethernet 00:0d:56:70:ee:02 [42949410.760000] eth1: RXcsums[1] LinkChgREG[1] MIirq[1] ASF[0] Split[0] WireSpeed[0] TSOcap[0] [42949410.760000] eth1: dma_rwctrl[76ff000f] [42949410.760000] Real Time Clock Driver v1.12 [42949410.770000] Linux agpgart interface v0.101 (c) Dave Jones [42949410.770000] sworks_agp: Unknown symbol agp_bridge [42949410.770000] sworks_agp: Unknown symbol global_cache_flush [42949410.770000] sworks_agp: Unknown symbol agp_device_command [42949410.770000] sworks_agp: Unknown symbol agp_generic_destroy_page [42949410.770000] sworks_agp: Unknown symbol agp_off [42949410.770000] sworks_agp: Unknown symbol agp_remove_bridge [42949410.770000] sworks_agp: Unknown symbol agp_generic_mask_memory [42949410.770000] sworks_agp: Unknown symbol agp_generic_alloc_by_type [42949410.770000] sworks_agp: Unknown symbol agp_generic_free_by_type [42949410.770000] sworks_agp: Unknown symbol agp_collect_device_status [42949410.770000] sworks_agp: Unknown symbol agp_alloc_bridge [42949410.770000] sworks_agp: Unknown symbol agp_add_bridge [42949410.770000] sworks_agp: Unknown symbol agp_generic_alloc_page [42949410.770000] sworks_agp: Unknown symbol agp_put_bridge [42949410.800000] Floppy drive(s): fd0 is 1.44M [42949410.830000] scb2_flash: warning - can't reserve rom window, continuing [42949410.840000] FDC 0 is a National Semiconductor PC87306 [42949410.920000] CFI: Found no SCB2 BIOS Flash device at location zero [42949410.920000] scb2_flash: flash probe failed! [42949411.260000] piix4_smbus 0000:00:0f.0: Found 0000:00:0f.0 device [42949411.260000] piix4_smbus 0000:00:0f.0: Host SMBus controller not enabled! [42949411.770000] lp: driver loaded but no devices found [42949411.980000] Adding 6265340k swap on /dev/sda2. Priority:-1 extents:1 across:6265340k [42949412.160000] EXT3 FS on sda1, internal journal [42949412.620000] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel at redhat.com [42949414.020000] hda: packet command error: status=0x51 { DriveReady SeekComplete Error } [42949414.020000] hda: packet command error: error=0x54 { AbortedCommand LastFailedSense=0x05 } [42949414.020000] ide: failed opcode was: unknown [42949414.020000] cdrom: open failed. [42949415.170000] tg3: eth0: Link is up at 1000 Mbps, full duplex. [42949415.170000] tg3: eth0: Flow control is off for TX and off for RX. [42949416.460000] kjournald starting. Commit interval 5 seconds [42949416.560000] EXT3 FS on md0, internal journal [42949416.560000] EXT3-fs: mounted filesystem with ordered data mode. [42949416.650000] kjournald starting. Commit interval 5 seconds [42949416.650000] EXT3 FS on sdf1, internal journal [42949416.650000] EXT3-fs: mounted filesystem with ordered data mode. [42949421.700000] NET: Registered protocol family 10 [42949421.700000] lo: Disabled Privacy Extensions [42949421.700000] IPv6 over IPv4 tunneling driver [42949432.640000] eth0: no IPv6 routers present [42949792.720000] hda: packet command error: status=0x51 { DriveReady SeekComplete Error } [42949792.720000] hda: packet command error: error=0x54 { AbortedCommand LastFailedSense=0x05 } [42949792.720000] ide: failed opcode was: unknown [42949792.720000] cdrom: open failed. [42949792.780000] hda: packet command error: status=0x51 { DriveReady SeekComplete Error } [42949792.780000] hda: packet command error: error=0x54 { AbortedCommand LastFailedSense=0x05 } [42949792.780000] ide: failed opcode was: unknown [42949792.790000] cdrom: open failed. -- md on the -server kernel reports wacky (overinflated) estimates on rebuilds https://launchpad.net/malone/bugs/38280 From pruzilla42 at yahoo.de Wed Apr 5 20:59:09 2006 From: pruzilla42 at yahoo.de (rubinstein) Date: Wed, 05 Apr 2006 20:59:09 -0000 Subject: [Bug 35101] Re: Wacom support completely broken now References: <20060315201206.6537.5926.malonedeb@gangotri.ubuntu.com> Message-ID: <20060405205909.24486.44483.malone@gangotri.ubuntu.com> With linux-image-2.6.15-19 my wacom tablet worked (with the new 0.7.2 driver), now with the new linux-image-2.6.15-20 today it is broken. Booted to the old kernel, it works again. -- Wacom support completely broken now https://launchpad.net/malone/bugs/35101 From mat at apinc.org Wed Apr 5 21:02:03 2006 From: mat at apinc.org (Mathieu Pillard) Date: Wed, 05 Apr 2006 21:02:03 -0000 Subject: [Bug 37391] Re: SD Card Reader not working References: <20060330203528.5415.6123.malonedeb@gangotri.ubuntu.com> Message-ID: <20060405210203.32313.31801.launchpad@gandwana.ubuntu.com> ** Bug 33401 has been marked a duplicate of this bug -- SD Card Reader not working https://launchpad.net/malone/bugs/37391 From mdz at ubuntu.com Wed Apr 5 21:00:23 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Wed, 05 Apr 2006 21:00:23 -0000 Subject: [Bug 34065] Re: hard disks are powered down (even in -server kernels) References: <20060308112603.14318.51120.malonedeb@gangotri.ubuntu.com> Message-ID: <20060405210023.24516.30900.malone@gangotri.ubuntu.com> What kind of disks? If IDE, check the hdparm settings. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Unconfirmed => Needs Info -- hard disks are powered down (even in -server kernels) https://launchpad.net/malone/bugs/34065 From mat at apinc.org Wed Apr 5 21:03:41 2006 From: mat at apinc.org (Mathieu Pillard) Date: Wed, 05 Apr 2006 21:03:41 -0000 Subject: [Bug 33401] Re: SD Card Reader stopped working References: <20060302130216.22140.36667.malonedeb@gandwana.ubuntu.com> Message-ID: <20060405210341.32233.60224.malone@gandwana.ubuntu.com> *** This bug is a duplicate of bug 37391 *** Erm, I marked this bug as a duplicate even though it's older than the other one, sorry about that. Anyway it's fixed though it doesn't matter :-) ** This bug has been marked a duplicate of bug 37391 SD Card Reader not working -- SD Card Reader stopped working https://launchpad.net/malone/bugs/33401 From mjg59 at codon.org.uk Wed Apr 5 21:11:27 2006 From: mjg59 at codon.org.uk (Matthew Garrett) Date: Wed, 05 Apr 2006 21:11:27 -0000 Subject: [Bug 38278] Re: wifi card don't work. isl3886 is required but not installed References: <20060405203926.24486.7083.malonedeb@gangotri.ubuntu.com> Message-ID: <20060405211128.32313.58514.malone@gandwana.ubuntu.com> There are two issues here: 1) islsm_pci is loaded before prism54. We should prefer prism54 to islsm_pci - it's a more fully-featured driver at the moment. However, it's not able to drive all cards with this PCI ID. 2) We're missing the softmac firmware. ** Changed in: linux-source-2.6.15 (Ubuntu) Assignee: Matthew Garrett => Ben Collins -- wifi card don't work. isl3886 is required but not installed https://launchpad.net/malone/bugs/38278 From mdz at ubuntu.com Wed Apr 5 21:28:27 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Wed, 05 Apr 2006 21:28:27 -0000 Subject: [Bug 34039] Re: bcm43xx module is highly unstable References: <20060308023058.26210.62368.malonedeb@gangotri.ubuntu.com> Message-ID: <20060405212827.24486.87393.malone@gangotri.ubuntu.com> Please use the procedure at https://wiki.ubuntu.com/DebuggingSystemCrash to get a backtrace from the crash ** Changed in: linux-source-2.6.15 (Ubuntu) Assignee: (unassigned) => Ben Collins Status: Unconfirmed => Needs Info -- bcm43xx module is highly unstable https://launchpad.net/malone/bugs/34039 From ricardo at iesdonana.org Wed Apr 5 21:33:11 2006 From: ricardo at iesdonana.org (=?utf-8?b?UmljYXJkbyBQw6lyZXogTMOzcGV6?=) Date: Wed, 05 Apr 2006 21:33:11 -0000 Subject: [Bug 38285] Version 2.6.15.19 depends of linux-image-2.6.15-20-k7 References: <20060405213311.24486.4040.malonedeb@gangotri.ubuntu.com> Message-ID: <20060405213311.24486.4040.malonedeb@gangotri.ubuntu.com> Public bug reported: Affects: linux-meta linux-image-k7 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: ricardo at yuggoth:~ $ apt-cache show linux-image-k7 Package: linux-image-k7 Priority: optional Section: base Installed-Size: 52 Maintainer: Ubuntu Kernel Team Architecture: i386 Source: linux-meta Version: 2.6.15.19 Depends: linux-image-2.6.15-20-k7 Filename: pool/main/l/linux-meta/linux-image-k7_2.6.15.19_i386.deb Size: 23262 MD5sum: a3603de72021c39fec45cb799dd6f921 Description: Linux kernel image on AMD K7. This package will always depend on the latest kernel image available for AMD Duron/Athlon. Bugs: mailto:ubuntu-users at lists.ubuntu.com Origin: Ubuntu I think linux-image-k7 must be versioned to 2.6.15.20. Nevertheless, it works well and does not causes problems during installation/upgrading. -- Version 2.6.15.19 depends of linux-image-2.6.15-20-k7 https://launchpad.net/malone/bugs/38285 From mdz at ubuntu.com Wed Apr 5 21:35:32 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Wed, 05 Apr 2006 21:35:32 -0000 Subject: [Bug 34144] Re: sis 760 + radeon 9250 = no acceleration References: <20060308221458.29403.93806.malonedeb@gangotri.ubuntu.com> Message-ID: <20060405213532.32233.57336.launchpad@gandwana.ubuntu.com> ** Changed in: linux-source-2.6.15 linux-image-2.6.15-17-386 (Ubuntu) Assignee: (unassigned) => Ben Collins -- sis 760 + radeon 9250 = no acceleration https://launchpad.net/malone/bugs/34144 From rcaskey at uga.edu Wed Apr 5 21:47:14 2006 From: rcaskey at uga.edu (Rob Caskey) Date: Wed, 05 Apr 2006 21:47:14 -0000 Subject: [Bug 34237] Powermac G5 plays audio from internal speaker when speakers are connected References: <20060309184436.29433.80815.malonedeb@gangotri.ubuntu.com> Message-ID: <20060405214714.32233.31136.launchpad@canonical@gandwana.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: Until I did today's dist-upgrade audio worked fine for me in dapper through my external speakers (dunno if the internal was working or not). Now all sound playback is through the internal speakers and nothing comes through the external speakers. Stock dual powermac G5. Will attach lspci -n -v output. Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: Until I did today's dist-upgrade audio worked fine for me in dapper through my external speakers (dunno if the internal was working or not). Now all sound playback is through the internal speakers and nothing comes through the external speakers. Stock dual powermac G5. Will attach lspci -n -v output. -- Powermac G5 plays audio from internal speaker when speakers are connected https://launchpad.net/malone/bugs/34237 From roshan.shariff at gmail.com Wed Apr 5 21:43:29 2006 From: roshan.shariff at gmail.com (Roshan Shariff) Date: Wed, 05 Apr 2006 21:43:29 -0000 Subject: [Bug 38288] IP Masq doesn't work with a bridge and IPv6 blocked References: <20060405214329.32233.39622.malonedeb@gandwana.ubuntu.com> Message-ID: <20060405214329.32233.39622.malonedeb@gandwana.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: Description: Masquerading does not work for connections from a bridge if the default policy for IPv6 forwarding in ip6tables is 'drop'. The IPv6 policy should not have any effect on IPv4 traffic. I encountered this bug while setting up shorewall 3.0.4 on dapper with kernel 2.6.15 amd64 smp. I have determined that the problem is not specific to shorewall and also occurs on breezy's 2.6.12 amd64 kernel (non-smp). The discussion that led to the discovery of this bug can be found on the shorewall-users list at [1]. Network configuration: bridge (lan0) with one port (eth0) internet access through PPPoE link ppp0 Steps to Reproduce: 1. Create a bridge with "brctl addbr lan0" 2. Add eth0 to the bridge with "brctl addif lan0 eth0" and "ifconfig eth0 0.0.0.0 up" 3. Configure lan0 with a static IP address 4. Enable IP Forwarding with "echo 1 > /proc/sys/net/ipv4/ip_forward" 2. Enable masquerading wih "iptables -t nat -A POSTROUTING -o ppp0 -s 192.168.1.0/24 -j MASQUERADE" 2a. At this point masquerading works fine 3. Disable forwarding of IPv6 with "ip6tables -P FORWARD DROP" Expected Results: Masquerading should work fine and systems on lan0 should be able to access the internet through ppp0 Actual results: Systems on the lan cannot connect to the Internet. However everything works fine if the ip6tables drop policy is not added. Setting the policy of the INPUT and OUTPUT IPv6 chains to DROP doesn't affect access to/from the firewall host. Only forwarding is affected. This should not happen since blocking IPv6 traffic should not have any effect on IPv4 traffic. Apart from this, the problem only occurs when the internal interface is a bridge, not when it is a normal interface. Tom Eastep (the author of Shorewall) says that it is a security breach to allow IPv6 traffic through the firewall, since an attacker could just send IPv6 traffic to bypass the firewall. I will attach the output of tcpdump -nvvi ppp0 port 80 with the IPv6 policy set to 'drop' and with it set to 'accept', while trying to browse www.google.com [1] http://sourceforge.net/mailarchive/forum.php?thread_id=10103319&forum_id=2270 -- IP Masq doesn't work with a bridge and IPv6 blocked https://launchpad.net/malone/bugs/38288 From mdz at ubuntu.com Wed Apr 5 21:47:13 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Wed, 05 Apr 2006 21:47:13 -0000 Subject: [Bug 34237] Re: Powermac G5 plays audio from internal speaker when speakers are connected References: <20060309184436.29433.80815.malonedeb@gangotri.ubuntu.com> Message-ID: <20060405214714.32233.6620.launchpad@gandwana.ubuntu.com> ** Changed in: alsa-driver (Ubuntu) Sourcepackagename: alsa-driver => linux-source-2.6.15 -- Powermac G5 plays audio from internal speaker when speakers are connected https://launchpad.net/malone/bugs/34237 From jon at kapla.se Wed Apr 5 21:49:13 2006 From: jon at kapla.se (Jon Kapla) Date: Wed, 05 Apr 2006 21:49:13 -0000 Subject: [Bug 30963] Re: [Bug 30963] Re: [dapper] snd_powermac does not recognize sound card References: <20060209122327.25235.98036.malonedeb@gangotri.ubuntu.com> <20060404155744.14649.4961.malone@gandwana.ubuntu.com> Message-ID: <44343B59.1080008@kapla.se> Daniel Turner wrote: >The soundcard works perfectly on the Flight 6 live CD, but once installed (with expresso) no soundcard found! This is with an iBook G4, 1.0 Ghz. > > I tried the flight6 live cd on my ibook g3 700 MHz, but I get the same result with that. No soundcards found. Upgraded my installed dapper to the new 2.6.15-20 kernel but no change. -- [dapper] snd_powermac does not recognize sound card https://launchpad.net/malone/bugs/30963 From JMBALADO at terra.es Wed Apr 5 21:49:46 2006 From: JMBALADO at terra.es (Jose) Date: Wed, 05 Apr 2006 21:49:46 -0000 Subject: [Bug 18691] Re: [Bug 18691] Re: Computer gets hotter if no USB port is used. References: <20060113135741.21012.41956.launchpad@macquarie.warthogs.hbd.com> <20060405155230.24486.508.malone@gangotri.ubuntu.com> Message-ID: <1144273786.8348.4.camel@localhost.localdomain> On Wed, 2006-04-05 at 15:52 +0000, Ben Collins wrote: > What sort of USB device are you talking about? I can only explain this as a hardware issue, not one that the kernel can control. Nothing to do whith any sort of USB device, the problem is the USB itself consuming all the cpu time if I left unplugged all USB ports. Perhaps a problem with hotplug, or any other demon taking care if something is plugged but I don't know. -- Computer gets hotter if no USB port is used. https://launchpad.net/malone/bugs/18691 From simos.ubuntu at gmail.com Wed Apr 5 21:59:43 2006 From: simos.ubuntu at gmail.com (Simos Xenitellis) Date: Wed, 05 Apr 2006 21:59:43 -0000 Subject: [Bug 37795] zd1211 wireless driver broken, too old (20050315) References: <20060403011323.23733.67873.malonedeb@gandwana.ubuntu.com> Message-ID: <20060405215943.24486.84109.launchpad@canonical@gangotri.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Assignee: Ben Collins Status: Unconfirmed Description: I could not get zd1211 work and several other people have issues: http://www.ubuntuforums.org/showthread.php?t=135682&highlight=zd1211 The driver version that I got with Dapper Flight 6 is 2005-03-15, which is a year old. There are several revisions to the driver that make it much more robust. I tried to use the driver with WEP. dmesg showed several errors (I'll include here once I get the box online). Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Assignee: Ben Collins Status: Unconfirmed Description: I could not get zd1211 work and several other people have issues: http://www.ubuntuforums.org/showthread.php?t=135682&highlight=zd1211 The driver version that I got with Dapper Flight 6 is 2005-03-15, which is a year old. There are several revisions to the driver that make it much more robust. I tried to use the driver with WEP. dmesg showed several errors (I'll include here once I get the box online). -- zd1211 wireless driver broken, too old (20050315) https://launchpad.net/malone/bugs/37795 From roshan.shariff at gmail.com Wed Apr 5 21:48:38 2006 From: roshan.shariff at gmail.com (Roshan Shariff) Date: Wed, 05 Apr 2006 21:48:38 -0000 Subject: [Bug 38288] Re: IP Masq doesn't work with a bridge and IPv6 blocked References: <20060405214329.32233.39622.malonedeb@gandwana.ubuntu.com> Message-ID: <20060405214838.24516.66517.launchpad@gangotri.ubuntu.com> ** Attachment added: "Tcpdump output (working)" http://librarian.launchpad.net/1944317/tcpdump.working.gz ** Attachment added: "Tcpdump output (not working)" http://librarian.launchpad.net/1944318/tcpdump.notworking.gz -- IP Masq doesn't work with a bridge and IPv6 blocked https://launchpad.net/malone/bugs/38288 From mdz at ubuntu.com Wed Apr 5 21:59:43 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Wed, 05 Apr 2006 21:59:43 -0000 Subject: [Bug 37795] Re: zd1211 wireless driver broken, too old (20050315) References: <20060403011323.23733.67873.malonedeb@gandwana.ubuntu.com> Message-ID: <20060405215943.24486.78838.launchpad@gangotri.ubuntu.com> ** Changed in: zd1211 (Ubuntu) Sourcepackagename: zd1211 => linux-source-2.6.15 Assignee: (unassigned) => Ben Collins -- zd1211 wireless driver broken, too old (20050315) https://launchpad.net/malone/bugs/37795 From mdz at ubuntu.com Wed Apr 5 22:01:29 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Wed, 05 Apr 2006 22:01:29 -0000 Subject: [Bug 34209] Re: 2.6.15-17-k7 doesn't boot on Athlon 2000+ References: <20060309134308.29403.37559.malonedeb@gangotri.ubuntu.com> Message-ID: <20060405220129.32233.54954.launchpad@gandwana.ubuntu.com> ** Changed in: linux-source-2.6.15 linux-image-2.6.15-17-k7 (Ubuntu) Severity: Normal => Major Assignee: (unassigned) => Ben Collins -- 2.6.15-17-k7 doesn't boot on Athlon 2000+ https://launchpad.net/malone/bugs/34209 From burner at suppressingfire.org Wed Apr 5 22:11:38 2006 From: burner at suppressingfire.org (Michael R. Head) Date: Wed, 05 Apr 2006 22:11:38 -0000 Subject: [Bug 38109] Re: [dapper] g4-based Mac Mini's bcm43xx wireless fails to work References: <20060405013409.25542.83349.malonedeb@gangotri.ubuntu.com> Message-ID: <20060405221138.32313.1001.malone@gandwana.ubuntu.com> Still no luck with -20. -- [dapper] g4-based Mac Mini's bcm43xx wireless fails to work https://launchpad.net/malone/bugs/38109 From javiermon at gmail.com Wed Apr 5 22:13:25 2006 From: javiermon at gmail.com (kmon) Date: Wed, 05 Apr 2006 22:13:25 -0000 Subject: [Bug 35814] Re: bcm43xx MAX syspend failed References: <20060321031914.8118.81768.malonedeb@gandwana.ubuntu.com> Message-ID: <20060405221325.24516.80750.malone@gangotri.ubuntu.com> Hi Can you please try 2.6.15-20 kernel? This has solved many issues with bcm43xx driver. -- bcm43xx MAX syspend failed https://launchpad.net/malone/bugs/35814 From javiermon at gmail.com Wed Apr 5 22:10:48 2006 From: javiermon at gmail.com (kmon) Date: Wed, 05 Apr 2006 22:10:48 -0000 Subject: [Bug 37576] Re: APIC error on CPU0: 40(40) References: <20060401111547.5441.66321.malonedeb@gangotri.ubuntu.com> Message-ID: <20060405221048.32233.62112.malone@gandwana.ubuntu.com> Fixed on 2.6.15-20 ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Confirmed => Fix Released -- APIC error on CPU0: 40(40) https://launchpad.net/malone/bugs/37576 From mdz at ubuntu.com Wed Apr 5 22:36:14 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Wed, 05 Apr 2006 22:36:14 -0000 Subject: [Bug 34306] Re: all powerpc kernel images should install additional utilities References: <20060310122853.17018.56138.malonedeb@gangotri.ubuntu.com> Message-ID: <20060405223618.32233.64278.launchpad@gandwana.ubuntu.com> ** Changed in: linux-meta linux-image-powerpc (Ubuntu) Assignee: (unassigned) => Ben Collins -- all powerpc kernel images should install additional utilities https://launchpad.net/malone/bugs/34306 From mdz at ubuntu.com Wed Apr 5 22:46:32 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Wed, 05 Apr 2006 22:46:32 -0000 Subject: [Bug 34259] Re: flashing waiting mouse with NVIDIA drivers References: <20060309234822.28582.64475.malonedeb@gandwana.ubuntu.com> Message-ID: <20060405224632.24486.86.launchpad@gangotri.ubuntu.com> ** Changed in: xorg (Ubuntu) Status: Unconfirmed => Needs Info -- flashing waiting mouse with NVIDIA drivers https://launchpad.net/malone/bugs/34259 From doko at ubuntu.com Wed Apr 5 22:54:04 2006 From: doko at ubuntu.com (Matthias Klose) Date: Wed, 05 Apr 2006 22:54:04 -0000 Subject: [Bug 34065] Re: hard disks are powered down (even in -server kernels) References: <20060308112603.14318.51120.malonedeb@gangotri.ubuntu.com> Message-ID: <20060405225404.24486.99161.malone@gangotri.ubuntu.com> these were SATA disks, in the meantime confirmed by Fabio. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Needs Info => Confirmed -- hard disks are powered down (even in -server kernels) https://launchpad.net/malone/bugs/34065 From mail at carthik.net Wed Apr 5 22:59:57 2006 From: mail at carthik.net (Carthik Sharma) Date: Wed, 05 Apr 2006 22:59:57 -0000 Subject: [Bug 38296] After upgrade to dapper, even old kernel fails - no pcmcia - error inserting genrtc References: <20060405225957.24516.75810.malonedeb@gangotri.ubuntu.com> Message-ID: <20060405225957.24516.75810.malonedeb@gangotri.ubuntu.com> Public bug reported: Affects: linux-source-2.6.12 linux-image-2.6.12-10-686 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: Hi, I dist-upgraded from breezy to dapper. The latest kernel does not work. Refer to Bug #38287 for details. The older kernel, which worked well with Breezy is also not working. When booting with kernel 2.6.12-10-686, I get amessage that says: starting pcmcia services ... fail then an Error message that says "Error failed to inset genrtc (genrtc.ko)" and also the errors: "calling hotplug without a hotplug agent defined" This is on an Acer Travelmate 290 LMi laptop that worked perfectly well before. Please let me know if I can provide more information, and also where to find the information on the system. I would have attached the output of dmesg and the contents of /var/log/messages, but since the internet is not working now on that laptop, I cannot do so :( Thank you. -- After upgrade to dapper, even old kernel fails - no pcmcia - error inserting genrtc https://launchpad.net/malone/bugs/38296 From midfield at gmail.com Wed Apr 5 23:16:02 2006 From: midfield at gmail.com (Ben) Date: Wed, 05 Apr 2006 23:16:02 -0000 Subject: [Bug 34389] Lid state is incorrect References: <20060311001407.17018.11482.malonedeb@gangotri.ubuntu.com> Message-ID: <20060405231602.24516.266.launchpad@canonical@gangotri.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: On latest Dapper, Dell Inspiron 700m: ben at catbee:~$ cat /proc/acpi/button/lid/LID0/state state: open I close the lid, wait for the computer to suspend. Then I open the lid, the computer resumes. ben at catbee:~$ cat /proc/acpi/button/lid/LID0/state state: closed This is a problem, for example, if i unplug the compute from AC, it triggers a "power" event, which seeing the lid is "closed" causes my computer to go to sleep, which is annoying. I can make the lid state go back to "open" by quickly closing and opening the lid, without letting the computer sleep. If the lid is in the "closed" state, it seems to persist across reboots. Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: On latest Dapper, Dell Inspiron 700m: ben at catbee:~$ cat /proc/acpi/button/lid/LID0/state state: open I close the lid, wait for the computer to suspend. Then I open the lid, the computer resumes. ben at catbee:~$ cat /proc/acpi/button/lid/LID0/state state: closed This is a problem, for example, if i unplug the compute from AC, it triggers a "power" event, which seeing the lid is "closed" causes my computer to go to sleep, which is annoying. I can make the lid state go back to "open" by quickly closing and opening the lid, without letting the computer sleep. If the lid is in the "closed" state, it seems to persist across reboots. -- Lid state is incorrect https://launchpad.net/malone/bugs/34389 From mdz at ubuntu.com Wed Apr 5 23:16:33 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Wed, 05 Apr 2006 23:16:33 -0000 Subject: [Bug 34389] Re: Lid state is incorrect References: <20060311001407.17018.11482.malonedeb@gangotri.ubuntu.com> Message-ID: <20060405231633.32233.73452.malone@gandwana.ubuntu.com> Please attach the output from "dmesg" and "sudo dmidecode" ** Changed in: acpi (Ubuntu) Sourcepackagename: acpi => linux-source-2.6.15 Binarypackagename: acpi => None ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Unconfirmed => Needs Info -- Lid state is incorrect https://launchpad.net/malone/bugs/34389 From mdz at ubuntu.com Wed Apr 5 23:28:20 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Wed, 05 Apr 2006 23:28:20 -0000 Subject: [Bug 34351] Re: Pinnacle PCTV Rave saa7134 References: <20060310194801.17018.83828.malonedeb@gangotri.ubuntu.com> Message-ID: <20060405232820.32233.89687.malone@gandwana.ubuntu.com> Please attach dmesg and lspci output ** Changed in: linux-source-2.6.15 (Ubuntu) Assignee: (unassigned) => Ben Collins Status: Unconfirmed => Needs Info -- Pinnacle PCTV Rave saa7134 https://launchpad.net/malone/bugs/34351 From mdz at ubuntu.com Wed Apr 5 23:34:43 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Wed, 05 Apr 2006 23:34:43 -0000 Subject: [Bug 34468] Re: No irda on Compal CL56 laptop References: <20060311160401.17018.74603.malonedeb@gangotri.ubuntu.com> Message-ID: <20060405233443.24486.83944.launchpad@gangotri.ubuntu.com> ** Changed in: linux-source-2.6.15 (Ubuntu) Sourcepackagename: linux-source-2.6.15 => irda-utils -- No irda on Compal CL56 laptop https://launchpad.net/malone/bugs/34468 From mark at markvdb.be Wed Apr 5 23:46:08 2006 From: mark at markvdb.be (Mark Van den Borre) Date: Wed, 05 Apr 2006 23:46:08 -0000 Subject: [Bug 34524] installer locks up on via VT82c586 IDE interface References: <20060311232318.17018.8220.malonedeb@gangotri.ubuntu.com> Message-ID: <20060405234608.32233.25212.launchpad@canonical@gandwana.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Assignee: Ben Collins Status: Unconfirmed Description: Hi, On my test machine with a a VIA VT82C586 IDE chipset and a CD-RW as the only optical drive, about all distro's installers I've ever tested hangs. Dapper 2006/03/10 daily image is no exception if I don't explicitly pass pci=noacpi and ide=nodma options. I couldn't find the ide=nodma option mentioned amongst the startup options. Maybe I overlooked it? I contribute this bug report in the hope of doing something useful. Please close this bug if that is not the case! Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Assignee: Ben Collins Status: Unconfirmed Description: Hi, On my test machine with a a VIA VT82C586 IDE chipset and a CD-RW as the only optical drive, about all distro's installers I've ever tested hangs. Dapper 2006/03/10 daily image is no exception if I don't explicitly pass pci=noacpi and ide=nodma options. I couldn't find the ide=nodma option mentioned amongst the startup options. Maybe I overlooked it? I contribute this bug report in the hope of doing something useful. Please close this bug if that is not the case! -- installer locks up on via VT82c586 IDE interface https://launchpad.net/malone/bugs/34524 From mdz at ubuntu.com Wed Apr 5 23:46:07 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Wed, 05 Apr 2006 23:46:07 -0000 Subject: [Bug 34524] Re: installer locks up on via VT82c586 IDE interface References: <20060311232318.17018.8220.malonedeb@gangotri.ubuntu.com> Message-ID: <20060405234608.32233.56108.launchpad@gandwana.ubuntu.com> ** Changed in: debian-installer (Ubuntu) Sourcepackagename: debian-installer => linux-source-2.6.15 Assignee: (unassigned) => Ben Collins -- installer locks up on via VT82c586 IDE interface https://launchpad.net/malone/bugs/34524 From jbinpg at shaw.ca Wed Apr 5 23:59:20 2006 From: jbinpg at shaw.ca (Jack Bowling) Date: Wed, 05 Apr 2006 23:59:20 -0000 Subject: [Bug 34551] scanimage not accessing epson perfection 2450 References: <20060312025347.17044.47942.malonedeb@gangotri.ubuntu.com> Message-ID: <20060405235920.32313.19454.launchpad@canonical@gandwana.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Needs Info Description: scanimage is blocking when trying to read my Epson Perfection 2450 USB 2.0 scanner in breezy. $uname -r 2.6.15-18-386 $sudo dpkg -S libusb libusb-0.1-4: /lib/libusb-0.1.so.4.4.2 libusb-0.1-4: /lib/libusb-0.1.so.4 libusb-0.1-4: /usr/share/doc/libusb-0.1-4/changelog.Debian.gz libusb-0.1-4: /usr/share/doc/libusb-0.1-4/README.Debian libusb-0.1-4: /usr/share/doc/libusb-0.1-4/copyright libusb-0.1-4: /usr/share/doc/libusb-0.1-4/changelog.gz libusb-0.1-4: /usr/share/doc/libusb-0.1-4 ================================ Detailed log available upon request. This is a showstopper for me. Worked fine in Hoary with hotplug. udev seems to be a trouble spot for usb. Jack Bowling jbinpg at shaw.ca Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Needs Info Description: scanimage is blocking when trying to read my Epson Perfection 2450 USB 2.0 scanner in breezy. $uname -r 2.6.15-18-386 $sudo dpkg -S libusb libusb-0.1-4: /lib/libusb-0.1.so.4.4.2 libusb-0.1-4: /lib/libusb-0.1.so.4 libusb-0.1-4: /usr/share/doc/libusb-0.1-4/changelog.Debian.gz libusb-0.1-4: /usr/share/doc/libusb-0.1-4/README.Debian libusb-0.1-4: /usr/share/doc/libusb-0.1-4/copyright libusb-0.1-4: /usr/share/doc/libusb-0.1-4/changelog.gz libusb-0.1-4: /usr/share/doc/libusb-0.1-4 ================================ Detailed log available upon request. This is a showstopper for me. Worked fine in Hoary with hotplug. udev seems to be a trouble spot for usb. Jack Bowling jbinpg at shaw.ca -- scanimage not accessing epson perfection 2450 https://launchpad.net/malone/bugs/34551 From mdz at ubuntu.com Wed Apr 5 23:59:20 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Wed, 05 Apr 2006 23:59:20 -0000 Subject: [Bug 34551] Re: scanimage not accessing epson perfection 2450 References: <20060312025347.17044.47942.malonedeb@gangotri.ubuntu.com> Message-ID: <20060405235920.32313.95467.malone@gandwana.ubuntu.com> What does dmesg say after this happens? ** Changed in: libusb (Ubuntu) Sourcepackagename: libusb => linux-source-2.6.15 Status: Unconfirmed => Needs Info -- scanimage not accessing epson perfection 2450 https://launchpad.net/malone/bugs/34551 From mdz at ubuntu.com Thu Apr 6 00:01:30 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Thu, 06 Apr 2006 00:01:30 -0000 Subject: [Bug 34651] Re: ACPI does not work on Asus motherboard with nForce chipset References: <20060312213644.17044.65036.malonedeb@gangotri.ubuntu.com> Message-ID: <20060406000131.32233.99215.launchpad@gandwana.ubuntu.com> ** Changed in: linux-source-2.6.15 kernel-image-2.6.15-18-386-di (Ubuntu) Assignee: (unassigned) => Ben Collins ** Changed in: linux-source-2.6.15 kernel-image-2.6.15-18-386-di (Ubuntu) Status: Unconfirmed => Confirmed -- ACPI does not work on Asus motherboard with nForce chipset https://launchpad.net/malone/bugs/34651 From mdz at ubuntu.com Thu Apr 6 00:02:51 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Thu, 06 Apr 2006 00:02:51 -0000 Subject: [Bug 34645] Re: static in sound output with alc880 References: <20060312204837.30057.4099.malonedeb@gandwana.ubuntu.com> Message-ID: <20060406000251.32233.66422.launchpad@gandwana.ubuntu.com> ** Changed in: linux-source-2.6.15 linux-image-2.6.15-18-k7 (Ubuntu) Assignee: (unassigned) => Ben Collins -- static in sound output with alc880 https://launchpad.net/malone/bugs/34645 From mdz at ubuntu.com Thu Apr 6 00:03:19 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Thu, 06 Apr 2006 00:03:19 -0000 Subject: [Bug 34640] Re: The ksoftirqd process is running at around 25% References: <20060312202819.17044.10548.malonedeb@gangotri.ubuntu.com> Message-ID: <20060406000319.32313.22067.launchpad@gandwana.ubuntu.com> ** Changed in: linux-source-2.6.15 kernel-image-2.6.15-18-386-di (Ubuntu) Binarypackagename: kernel-image-2.6.15-18-386-di => None Severity: Normal => Minor Assignee: (unassigned) => Ben Collins -- The ksoftirqd process is running at around 25% https://launchpad.net/malone/bugs/34640 From mdz at ubuntu.com Thu Apr 6 00:11:45 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Thu, 06 Apr 2006 00:11:45 -0000 Subject: [Bug 34723] Re: iMac G5 Thermal Fan Support References: <20060313091457.30057.2443.malonedeb@gandwana.ubuntu.com> Message-ID: <20060406001145.24486.89302.launchpad@gangotri.ubuntu.com> ** Changed in: linux-source-2.6.15 (Ubuntu) Severity: Normal => Minor Assignee: (unassigned) => Ben Collins -- iMac G5 Thermal Fan Support https://launchpad.net/malone/bugs/34723 From mdz at ubuntu.com Thu Apr 6 00:19:14 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Thu, 06 Apr 2006 00:19:14 -0000 Subject: [Bug 34780] Re: bridge module, misbehaviour after suspending (or hibernating) References: <20060313155837.17018.55204.malonedeb@gangotri.ubuntu.com> Message-ID: <20060406001914.32313.72369.malone@gandwana.ubuntu.com> ubuntu-laptop folk: is it likely this can be fixed in the kernel, or should it be worked around in acpi-support? ** Changed in: linux-meta (Ubuntu) Sourcepackagename: linux-meta => linux-source-2.6.15 Assignee: (unassigned) => Ben Collins -- bridge module, misbehaviour after suspending (or hibernating) https://launchpad.net/malone/bugs/34780 From villi at iki.fi Thu Apr 6 00:29:46 2006 From: villi at iki.fi (Ville Lindfors) Date: Thu, 06 Apr 2006 00:29:46 -0000 Subject: [Bug 38304] Prism 2.5 firmware load failed References: <20060406002946.32233.83854.malonedeb@gandwana.ubuntu.com> Message-ID: <20060406002946.32233.83854.malonedeb@gandwana.ubuntu.com> Public bug reported: Affects: linux-meta linux-image-2.6-686 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: See below for uname and dmesg output #uname -a Linux viila 2.6.15-20-686 #1 SMP PREEMPT Tue Apr 4 18:37:00 UTC 2006 i686 GNU/Linux #dmesg [4295270.573000] pccard: CardBus card inserted into slot 0 [4295270.841000] ieee80211_crypt: registered algorithm 'NULL' [4295270.847000] ieee80211: 802.11 data/management/control stack, git-1.1.7 [4295270.847000] ieee80211: Copyright (C) 2004-2005 Intel Corporation [4295270.911000] Loaded islsm_pci driver, version 0 [4295270.912000] PCI: Enabling device 0000:02:00.0 (0000 -> 0002) [4295270.912000] ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10 [4295271.005000] Loaded prism54 driver, version 1.2 [4295271.638000] islusb: Request firmware for 'isl3886' failed: -2 [4295271.639000] eth1: could not upload firmware ('isl3886') [4295271.639000] eth1: islpci_reset: failure [4295271.703000] islusb: unable to boot device [4295271.774000] islusb: Request firmware for 'isl3886' failed: -2 [4295271.775000] eth1: could not upload firmware ('isl3886') [4295271.775000] eth1: islpci_reset: failure [4295271.840000] islusb: unable to boot device -- Prism 2.5 firmware load failed https://launchpad.net/malone/bugs/38304 From villi at iki.fi Thu Apr 6 00:32:25 2006 From: villi at iki.fi (Ville Lindfors) Date: Thu, 06 Apr 2006 00:32:25 -0000 Subject: [Bug 38304] Re: Prism 2.5 firmware load failed References: <20060406002946.32233.83854.malonedeb@gandwana.ubuntu.com> Message-ID: <20060406003225.32233.76310.malone@gandwana.ubuntu.com> Works on previous kernel 2.6.15-19-686 and also earlier versions. -- Prism 2.5 firmware load failed https://launchpad.net/malone/bugs/38304 From villi at iki.fi Thu Apr 6 00:34:39 2006 From: villi at iki.fi (Ville Lindfors) Date: Thu, 06 Apr 2006 00:34:39 -0000 Subject: [Bug 38304] Re: Prism 2.5 firmware load failed References: <20060406002946.32233.83854.malonedeb@gandwana.ubuntu.com> Message-ID: <20060406003439.24486.55062.malone@gangotri.ubuntu.com> lspci output 0000:02:00.0 Network controller: Intersil Corporation Intersil ISL3890 [Prism GT/Prism Duette] (rev 01) -- Prism 2.5 firmware load failed https://launchpad.net/malone/bugs/38304 From mjg59 at codon.org.uk Thu Apr 6 00:32:16 2006 From: mjg59 at codon.org.uk (Matthew Garrett) Date: Thu, 06 Apr 2006 00:32:16 -0000 Subject: [Bug 34780] Re: bridge module, misbehaviour after suspending (or hibernating) References: <20060313155837.17018.55204.malonedeb@gangotri.ubuntu.com> Message-ID: <20060406003216.24516.12147.malone@gangotri.ubuntu.com> The best that could be done in acpi-support would be to unload and reload the module, which would lose any configuration. Best to figure out why it's causing problems and fix it in the kernel. -- bridge module, misbehaviour after suspending (or hibernating) https://launchpad.net/malone/bugs/34780 From tanarrifujitsu at optusnet.com.au Thu Apr 6 01:20:51 2006 From: tanarrifujitsu at optusnet.com.au (William Grant) Date: Thu, 06 Apr 2006 01:20:51 -0000 Subject: [Bug 36512] Dell Inspiron 630m sound is broken References: <20060325001401.20484.4103.malonedeb@gangotri.ubuntu.com> Message-ID: <20060406012051.32233.41861.launchpad@canonical@gandwana.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: Low Assignee: Ben Collins Status: In Progress Description: The Dell Inspiron 630m's sound is broken. All it can do is play sounds through the speakers. Applications attempting to use the microphone hang, and alsamixer is very bare (basically just Master and PCM sliders, with a disfunctional Microphone one). This is probably because the Intel HDA Audio in the laptop uses the Sigmatel STAC9750, which is not entirely supported by ALSA, it would appear. Here are details of the device, as returned by lspci -vv: 0000:00:1b.0 0403: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller (rev 03) Subsystem: Dell: Unknown device 01b5 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- TAbort- SERR- Message-ID: <20060406012015.24486.49284.malone@gangotri.ubuntu.com> *** This bug is a duplicate of bug 35098 *** See comment in #35098. ** Changed in: alsa-driver (Ubuntu) Sourcepackagename: alsa-driver => linux-source-2.6.15 Priority: None => Low Assignee: (unassigned) => Ben Collins Status: Unconfirmed => In Progress ** This bug has been marked a duplicate of bug 35098 Using headphone jack on stac9xxx codecs (HDA) doesn't disable speakers -- Dell Inspiron 630m sound is broken https://launchpad.net/malone/bugs/36512 From crimsun at fungus.sh.nu Thu Apr 6 01:16:52 2006 From: crimsun at fungus.sh.nu (Daniel T. Chen) Date: Thu, 06 Apr 2006 01:16:52 -0000 Subject: [Bug 35098] Re: Headphone Jack doesn't disable speakers References: <20060315193931.6537.15347.malonedeb@gangotri.ubuntu.com> Message-ID: <20060406011653.24486.70718.malone@gangotri.ubuntu.com> I accidentally broke patch_sigmatel in 19.29. It's fixed in 20.30, which has been available for about a day in Dapper (actually long before then if you track BenC's git). I'll look at the patch and tweak as necessary against our tree. ** Changed in: linux-source-2.6.12 linux-image-2.6.12-10-686 (Ubuntu) Sourcepackagename: linux-source-2.6.12 => linux-source-2.6.15 Binarypackagename: linux-image-2.6.12-10-686 => None Priority: Medium => Low Assignee: (unassigned) => Ben Collins Status: Unconfirmed => In Progress ** Summary changed: - Headphone Jack doesn't disable speakers + Using headphone jack on stac9xxx codecs (HDA) doesn't disable speakers ** Bug 36512 has been marked a duplicate of this bug -- Using headphone jack on stac9xxx codecs (HDA) doesn't disable speakers https://launchpad.net/malone/bugs/35098 From crimsun at fungus.sh.nu Thu Apr 6 01:46:05 2006 From: crimsun at fungus.sh.nu (Daniel T. Chen) Date: Thu, 06 Apr 2006 01:46:05 -0000 Subject: [Bug 35951] Re: no audio output (card recognised) References: <20060322044815.30471.23828.malonedeb@gangotri.ubuntu.com> Message-ID: <20060406014605.32313.27488.malone@gandwana.ubuntu.com> https://lists.ubuntu.com/archives/dapper-changes/2006-April/008708.html ** Changed in: linux-source-2.6.15 linux-image-2.6.15-19-amd64-generic (Ubuntu) Status: Fix Committed => Fix Released -- no audio output (card recognised) https://launchpad.net/malone/bugs/35951 From crimsun at fungus.sh.nu Thu Apr 6 01:49:00 2006 From: crimsun at fungus.sh.nu (Daniel T. Chen) Date: Thu, 06 Apr 2006 01:49:00 -0000 Subject: [Bug 34645] Re: static in sound output with alc880 References: <20060312204837.30057.4099.malonedeb@gandwana.ubuntu.com> Message-ID: <20060406014901.24486.72487.malone@gangotri.ubuntu.com> Is this problem reproducible on current Dapper (i.e., with linux-image-2.6.15-20-k7)? ** Changed in: linux-source-2.6.15 linux-image-2.6.15-18-k7 (Ubuntu) Status: Unconfirmed => Needs Info -- static in sound output with alc880 https://launchpad.net/malone/bugs/34645 From djturner at blueyonder.co.uk Thu Apr 6 01:56:27 2006 From: djturner at blueyonder.co.uk (Trip) Date: Thu, 06 Apr 2006 01:56:27 -0000 Subject: [Bug 38058] Re: Everything locks up References: <20060404181106.25542.45586.malonedeb@gangotri.ubuntu.com> Message-ID: <20060406015627.24486.33185.malone@gangotri.ubuntu.com> Just thought that I'd let you know that I updated to kernel 2.6.15-20-386 today & the problem seems to have been sorted. I've started Ekiga about 15 time's within the past 4 hours after fresh restarts & it hasn't crashed once. I'll still keep an eye on it though just to make sure. Thanks! -- Everything locks up https://launchpad.net/malone/bugs/38058 From elanthis at awesomeplay.com Thu Apr 6 01:58:28 2006 From: elanthis at awesomeplay.com (Sean Middleditch) Date: Thu, 06 Apr 2006 01:58:28 -0000 Subject: [Bug 34645] Re: static in sound output with alc880 References: <20060312204837.30057.4099.malonedeb@gandwana.ubuntu.com> Message-ID: <20060406015828.32313.59382.malone@gandwana.ubuntu.com> It doesn't seem to be. I didn't do a complete reboot, but I unloaded the snd-hda-intel module, remove the position_fix line from my modutils configuration, reloaded the module, and now music in Banshee still sounds crystal clear. If you want me to do a complete reboot and a fresh module load, I can test again tomorrow. -- static in sound output with alc880 https://launchpad.net/malone/bugs/34645 From midfield at gmail.com Thu Apr 6 02:15:44 2006 From: midfield at gmail.com (Ben) Date: Thu, 06 Apr 2006 02:15:44 -0000 Subject: [Bug 34389] Re: Lid state is incorrect References: <20060311001407.17018.11482.malonedeb@gangotri.ubuntu.com> <20060405231633.32233.73452.malone@gandwana.ubuntu.com> Message-ID: <9157df230604051915m4d652633s7f96d3dbe7388ac0@mail.gmail.com> i've attached the dmesg and dimedecode as you've requested. thanks, Ben On 4/5/06, Matt Zimmerman wrote: > Please attach the output from "dmesg" and "sudo dmidecode" > > ** Changed in: acpi (Ubuntu) > Sourcepackagename: acpi => linux-source-2.6.15 > Binarypackagename: acpi => None > > ** Changed in: linux-source-2.6.15 (Ubuntu) > Status: Unconfirmed => Needs Info > -- > Lid state is incorrect > https://launchpad.net/malone/bugs/34389 > ** Attachment added: "dmesg" http://librarian.launchpad.net/1953884/dmesg.out ** Attachment added: "dmidecode.out" http://librarian.launchpad.net/1953885/dmidecode.out -- Lid state is incorrect https://launchpad.net/malone/bugs/34389 From jeff250 at gmail.com Thu Apr 6 03:17:22 2006 From: jeff250 at gmail.com (Jeff250) Date: Thu, 06 Apr 2006 03:17:22 -0000 Subject: [Bug 35098] Re: Using headphone jack on stac9xxx codecs (HDA) doesn't disable speakers References: <20060315193931.6537.15347.malonedeb@gangotri.ubuntu.com> Message-ID: <20060406031722.32233.62935.malone@gandwana.ubuntu.com> The .20 kernel seems to restore audio and mute the speakers with headphone plugging. Great! -- Using headphone jack on stac9xxx codecs (HDA) doesn't disable speakers https://launchpad.net/malone/bugs/35098 From jason at subterrific.net Thu Apr 6 03:25:58 2006 From: jason at subterrific.net (Jason Toffaletti) Date: Thu, 06 Apr 2006 03:25:58 -0000 Subject: [Bug 33116] Re: powernow-k8 refuses to load References: <20060228031323.27016.20737.malonedeb@gangotri.ubuntu.com> Message-ID: <20060406032558.24486.95394.malone@gangotri.ubuntu.com> Fixed in 2.6.15-20-k7, thank you! -- powernow-k8 refuses to load https://launchpad.net/malone/bugs/33116 From tskisner.public at gmail.com Thu Apr 6 03:25:54 2006 From: tskisner.public at gmail.com (TedKisner) Date: Thu, 06 Apr 2006 03:25:54 -0000 Subject: [Bug 33855] Re: A new Panasonic ACPI driver is required for kernel-2.6.15 References: <20060306024325.22115.48779.malonedeb@gandwana.ubuntu.com> Message-ID: <20060406032554.24516.70287.malone@gangotri.ubuntu.com> The updated pcc_acpi driver is now part of kernel 2.6.15-20, and is available in dapper. Hotkeys now work fine on a Panasonic R4 with this standard kernel. Can the original poster confirm that the new kernel package resolves this bug? -- A new Panasonic ACPI driver is required for kernel-2.6.15 https://launchpad.net/malone/bugs/33855 From djturner at blueyonder.co.uk Thu Apr 6 03:55:54 2006 From: djturner at blueyonder.co.uk (Trip) Date: Thu, 06 Apr 2006 03:55:54 -0000 Subject: [Bug 35319] Re: no Fn at all Vaio SZ1XP Dapper References: <20060317124552.11105.6446.malonedeb@gandwana.ubuntu.com> Message-ID: <20060406035554.24516.89725.malone@gangotri.ubuntu.com> You've probably checked this already but just in case.. On my Sony VAIO VGN-FS215E in the bios (press F2 when comps first turned on to get into bios) there is an option to change the HotKey Event. You can change it between type1,2 or 3. Is it the same on your machine? Hope it helps! -- no Fn at all Vaio SZ1XP Dapper https://launchpad.net/malone/bugs/35319 From crimsun at fungus.sh.nu Thu Apr 6 04:02:11 2006 From: crimsun at fungus.sh.nu (Daniel T. Chen) Date: Thu, 06 Apr 2006 04:02:11 -0000 Subject: [Bug 34645] Re: static in sound output with alc880 References: <20060312204837.30057.4099.malonedeb@gandwana.ubuntu.com> Message-ID: <20060406040211.32313.87502.malone@gandwana.ubuntu.com> Yes, please confirm with a complete reboot and fresh module load. -- static in sound output with alc880 https://launchpad.net/malone/bugs/34645 From crimsun at fungus.sh.nu Thu Apr 6 04:03:49 2006 From: crimsun at fungus.sh.nu (Daniel T. Chen) Date: Thu, 06 Apr 2006 04:03:49 -0000 Subject: [Bug 35098] Re: Using headphone jack on stac9xxx codecs (HDA) doesn't disable speakers References: <20060315193931.6537.15347.malonedeb@gangotri.ubuntu.com> Message-ID: <20060406040349.32313.25163.malone@gandwana.ubuntu.com> Thanks for the affirmation, Jeff. Comments from others? -- Using headphone jack on stac9xxx codecs (HDA) doesn't disable speakers https://launchpad.net/malone/bugs/35098 From Ben.Stanley at exemail.com.au Thu Apr 6 04:07:39 2006 From: Ben.Stanley at exemail.com.au (Ben Stanley) Date: Thu, 06 Apr 2006 04:07:39 -0000 Subject: [Bug 34508] 2.6.15-19 kernel fails to boot on ppc machine References: <20060311210305.30082.75520.malonedeb@gandwana.ubuntu.com> Message-ID: <20060406040739.32313.793.malone@gandwana.ubuntu.com> I updated from a perfectly working Breezy to Dapper by apt-get dist-upgrade on 5/4/06, and now I have a wonderful paperweight that won't boot. The machine is a 2000 PowerBook "Pismo" model. (/proc/cpuinfo says PowerBook3). The installed kernel version is 2.6.15-19-powerpc. When the machine tries to boot using the default (2.6.15-19) kernel, it displays only the following message: [ 24.007715] no framebuffer address found for /pci at f0000000/ATY,RageM3pParent at 10/ATY,RageM3pB It then hangs for a few minutes and then displays the following message: ALERT! /dev/hda13 does not exist. Dropping to a shell! then drops into BusyBox. If I try to boot using the previously working Breezy kernel (2.6.12-10), I get the following behaviour: [ ??.??????] aty128fb: Invalid ROM signature 0 should be 0xaa55 [ ??.??????] no framebuffer address found for /pci at f0000000/ATY,RageM3pParent at 10/ATY,RageM3pB Segmentation fault ALERT! /dev/hda13 does not exist. Dropping to a shell! [Note that the messages about aty128fb and RageM3p were also displayed during normal operation of Breezy.] If I try to boot using Linux debug at the yaboot prompt, it probes the ide devices (not the partition tables), starts up the TCP stack, and the last few messags are: [ 28.852783] Freeing unused kernel memory: 180k init [ 29.013427] Capability LSM initialized [ 29.121935] Found KeyWest i2c on "uni-n", 2 channels, stepping: 4 bits [ 29.128864] Found KeyWest i2c on "mac-io", 1 channel, stepping: 4 bits Then it hangs for a little while and drops into BusyBox. These tests were conducted with the laptop connected only to the power supply, an ethernet and a Logitech 3 button USB wheelmouse. Removing the mouse did not seem to have any effect. The issue I am describing here seems to be a little different from that described by others. -- 2.6.15 kernel fails to boot on ppc machine https://launchpad.net/malone/bugs/34508 From ariel.vardi at gmail.com Thu Apr 6 04:20:44 2006 From: ariel.vardi at gmail.com (Ariel Vardi) Date: Thu, 06 Apr 2006 04:20:44 -0000 Subject: [Bug 35319] Re: [Bug 35319] Re: no Fn at all Vaio SZ1XP Dapper References: <20060317124552.11105.6446.malonedeb@gandwana.ubuntu.com> <20060406035554.24516.89725.malone@gangotri.ubuntu.com> Message-ID: <1144297244.5532.0.camel@localhost.localdomain> Unfortunately there's no such option in the SZ Bios :( On Thu, 2006-04-06 at 03:55 +0000, Trip wrote: > You've probably checked this already but just in case.. > On my Sony VAIO VGN-FS215E in the bios (press F2 when comps first turned on to get into bios) there is an option to change the HotKey Event. > You can change it between type1,2 or 3. > Is it the same on your machine? > > Hope it helps! -- no Fn at all Vaio SZ1XP Dapper https://launchpad.net/malone/bugs/35319 From andrew.bennetts at canonical.com Thu Apr 6 04:27:25 2006 From: andrew.bennetts at canonical.com (Andrew Bennetts) Date: Thu, 06 Apr 2006 04:27:25 -0000 Subject: [Bug 35098] Re: Using headphone jack on stac9xxx codecs (HDA) doesn't disable speakers References: <20060315193931.6537.15347.malonedeb@gangotri.ubuntu.com> Message-ID: <20060406042725.24516.87700.malone@gangotri.ubuntu.com> See my comment on #36512: with -20, headphone plugging mutes the speakers, but no sound comes through the headphones, and unplugging doesn't unmute the speakers. Suspend/resume restores the speaker sound, and then headphone plugging takes no further effect. -- Using headphone jack on stac9xxx codecs (HDA) doesn't disable speakers https://launchpad.net/malone/bugs/35098 From robitaille at gmail.com Thu Apr 6 04:48:33 2006 From: robitaille at gmail.com (Daniel Robitaille) Date: Thu, 06 Apr 2006 04:48:33 -0000 Subject: [Bug 22075] [Breezy] pcmcia modem card not recognized as a modem References: <20060113141619.21012.25641.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060406044833.32313.13154.launchpad@canonical@gandwana.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 pcmcia-cs (Ubuntu) Severity: Normal Priority: (none set) Status: Confirmed Description: I was trying out an old 14,400 faxmodem pcmcia card (Megahertz XJ1144) in my laptop, and it isn't recognized as a modem by the network-admin gui. The modem doesn't appear as one of the available network device. Looking in the device manager, it seems the card is known in it as a unknown serial device. Here is the output from cardctl info: $ cardctl info PRODID_1="MEGAHERTZ" PRODID_2="XJ1144" PRODID_3="A5" PRODID_4="PCMCIA MODEM" MANFID=0102,0005 FUNCID=2 Public bug reported: Affects: linux-source-2.6.15 pcmcia-cs (Ubuntu) Severity: Normal Priority: (none set) Status: Confirmed Description: I was trying out an old 14,400 faxmodem pcmcia card (Megahertz XJ1144) in my laptop, and it isn't recognized as a modem by the network-admin gui. The modem doesn't appear as one of the available network device. Looking in the device manager, it seems the card is known in it as a unknown serial device. Here is the output from cardctl info: $ cardctl info PRODID_1="MEGAHERTZ" PRODID_2="XJ1144" PRODID_3="A5" PRODID_4="PCMCIA MODEM" MANFID=0102,0005 FUNCID=2 -- [Breezy] pcmcia modem card not recognized as a modem https://launchpad.net/malone/bugs/22075 From scott at ubuntu.com Thu Apr 6 04:48:32 2006 From: scott at ubuntu.com (Scott James Remnant) Date: Thu, 06 Apr 2006 04:48:32 -0000 Subject: [Bug 22075] Re: [Breezy] pcmcia modem card not recognized as a modem References: <20060113141619.21012.25641.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060406044833.32313.72241.malone@gandwana.ubuntu.com> No kernel modules for these that I can see ... ** Changed in: pcmcia-cs (Ubuntu) Sourcepackagename: pcmcia-cs => linux-source-2.6.15 Assignee: Matthew Garrett => (unassigned) -- [Breezy] pcmcia modem card not recognized as a modem https://launchpad.net/malone/bugs/22075 From dn at offspringnet.net Thu Apr 6 04:52:26 2006 From: dn at offspringnet.net (grendel970) Date: Thu, 06 Apr 2006 04:52:26 -0000 Subject: [Bug 33161] Re: PnPACPI errors on boot and no /dev/fd0 References: <20060228154107.17498.36793.malonedeb@gangotri.ubuntu.com> Message-ID: <20060406045226.32233.64646.malone@gandwana.ubuntu.com> Fixed in 2.6.15-20. -- PnPACPI errors on boot and no /dev/fd0 https://launchpad.net/malone/bugs/33161 From crimsun at fungus.sh.nu Thu Apr 6 05:10:24 2006 From: crimsun at fungus.sh.nu (Daniel T. Chen) Date: Thu, 06 Apr 2006 05:10:24 -0000 Subject: [Bug 35098] Re: Using headphone jack on stac9xxx codecs (HDA) doesn't disable speakers References: <20060315193931.6537.15347.malonedeb@gangotri.ubuntu.com> Message-ID: <20060406051024.24486.53069.malone@gangotri.ubuntu.com> Andrew, please attach the output from ``lspci -nv && tail -2 /proc/asound/oss/sndstat'', thanks. -- Using headphone jack on stac9xxx codecs (HDA) doesn't disable speakers https://launchpad.net/malone/bugs/35098 From dn at offspringnet.net Thu Apr 6 05:15:28 2006 From: dn at offspringnet.net (grendel970) Date: Thu, 06 Apr 2006 05:15:28 -0000 Subject: [Bug 37881] Re: Parallel port printer not working References: <20060403150937.23108.72392.malonedeb@gandwana.ubuntu.com> Message-ID: <20060406051528.32233.69494.malone@gandwana.ubuntu.com> 2.6.15-20 does not fix, the acpi pnp fix does make it detect properly but it still does not work, tried: irq7,0x378 above w/ irq7 reserved ecp mode with above and dma0 oddly enough when tracing cups parallel writer, I get the following repeatedly on descriptor 4? read(4, 0xbfb21dae, 1024) = -1 EBADF (Bad file descriptor) ** Changed in: linux-source-2.6.15 linux-image-2.6.15-19-386 (Ubuntu) Binarypackagename: linux-image-2.6.15-19-386 => linux-image-2.6.15-20-386 -- Parallel port printer not working https://launchpad.net/malone/bugs/37881 From scott at ubuntu.com Thu Apr 6 05:17:10 2006 From: scott at ubuntu.com (Scott James Remnant) Date: Thu, 06 Apr 2006 05:17:10 -0000 Subject: [Bug 32519] Re: root disk not found when booting on Sony Vaio PGN-S3XP References: <20060222213438.15768.684.malonedeb@gandwana.ubuntu.com> Message-ID: <20060406051710.32313.25813.malone@gandwana.ubuntu.com> Almost certainly a lack of ahci in the initramfs, that. Glad it works for you now. -- root disk not found when booting on Sony Vaio PGN-S3XP https://launchpad.net/malone/bugs/32519 From scott at ubuntu.com Thu Apr 6 05:22:12 2006 From: scott at ubuntu.com (Scott James Remnant) Date: Thu, 06 Apr 2006 05:22:12 -0000 Subject: [Bug 18489] Re: mice detected as imps2 not as ps2++ References: <20060113135641.21012.86896.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060406052212.24516.40261.malone@gangotri.ubuntu.com> How the hell did this get to udev?! Isn't this just the "dexconf hard-codes the mouse driver" bitch? ** Changed in: udev (Ubuntu) Sourcepackagename: udev => x11-common -- mice detected as imps2 not as ps2++ https://launchpad.net/malone/bugs/18489 From andrew.bennetts at canonical.com Thu Apr 6 05:30:02 2006 From: andrew.bennetts at canonical.com (Andrew Bennetts) Date: Thu, 06 Apr 2006 05:30:02 -0000 Subject: [Bug 35098] Re: Using headphone jack on stac9xxx codecs (HDA) doesn't disable speakers References: <20060315193931.6537.15347.malonedeb@gangotri.ubuntu.com> Message-ID: <20060406053002.32233.18415.launchpad@gandwana.ubuntu.com> ** Attachment added: "Output of lspci -nv && tail -2 /proc/asound/oss/sndstat" http://librarian.launchpad.net/1956174/sound-info.txt ** Attachment added: "Output of lspci -nv && tail -2 /proc/asound/oss/sndstat run as root." http://librarian.launchpad.net/1956214/sound-info.txt -- Using headphone jack on stac9xxx codecs (HDA) doesn't disable speakers https://launchpad.net/malone/bugs/35098 From michael.favia at insitesinc.com Thu Apr 6 05:27:49 2006 From: michael.favia at insitesinc.com (Michael Favia) Date: Thu, 06 Apr 2006 05:27:49 -0000 Subject: [Bug 35101] Re: Wacom support completely broken now References: <20060315201206.6537.5926.malonedeb@gangotri.ubuntu.com> Message-ID: <20060406052749.32313.92643.malone@gandwana.ubuntu.com> wfm. 64bit maybe? michaelfavia at lithium:~$ uname -a Linux lithium 2.6.15-20-386 #1 PREEMPT Tue Apr 4 17:48:51 UTC 2006 i686 GNU/Linux -- Wacom support completely broken now https://launchpad.net/malone/bugs/35101 From michael.favia at insitesinc.com Thu Apr 6 05:30:32 2006 From: michael.favia at insitesinc.com (Michael Favia) Date: Thu, 06 Apr 2006 05:30:32 -0000 Subject: [Bug 35101] Re: Wacom support completely broken now References: <20060315201206.6537.5926.malonedeb@gangotri.ubuntu.com> Message-ID: <20060406053032.24516.30358.malone@gangotri.ubuntu.com> SB: have you made sure you "enabled" the eraser and stylus in gimp preferences under "Input devices" the correct selection is "screen" to enable pressure for me in gimp. -- Wacom support completely broken now https://launchpad.net/malone/bugs/35101 From ersplus at free.fr Thu Apr 6 05:58:40 2006 From: ersplus at free.fr (Ersplus) Date: Thu, 06 Apr 2006 05:58:40 -0000 Subject: [Bug 35684] Re: saa7134 sound cuts after 3s References: <20060320082849.22884.76996.malonedeb@gangotri.ubuntu.com> Message-ID: <20060406055840.24516.25181.launchpad@gangotri.ubuntu.com> ** Changed in: linux-source-2.6.15 linux-image-2.6.15-18-386 (Ubuntu) Sourcepackagename: linux-source-2.6.15 => linux-image-2.6.15-20-386 -- saa7134 sound cuts after 3s https://launchpad.net/malone/bugs/35684 From ersplus at free.fr Thu Apr 6 06:01:11 2006 From: ersplus at free.fr (Ersplus) Date: Thu, 06 Apr 2006 06:01:11 -0000 Subject: [Bug 34351] Re: Pinnacle PCTV Rave saa7134 References: <20060310194801.17018.83828.malonedeb@gangotri.ubuntu.com> Message-ID: <20060406060111.32233.84694.malone@gandwana.ubuntu.com> lspci : 0000:00:00.0 Host bridge: VIA Technologies, Inc. VT8385 [K8T800 AGP] Host Bridge (rev 01) 0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI bridge [K8T800/K8T890 South] 0000:00:06.0 Multimedia controller: Philips Semiconductors SAA7134 Video Broadcast Decoder (rev 01) 0000:00:07.0 Network controller: RaLink Ralink RT2500 802.11 Cardbus Reference Card (rev 01) 0000:00:08.0 Communication controller: Intel Corporation 536EP Data Fax Modem 0000:00:0e.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host Controller (rev 80) 0000:00:0f.0 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06) 0000:00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81) 0000:00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81) 0000:00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81) 0000:00:10.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81) 0000:00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 86) 0000:00:11.0 ISA bridge: VIA Technologies, Inc. VT8237 ISA bridge [KT600/K8T800/K8T890 South] 0000:00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 60) 0000:00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration 0000:00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map 0000:00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller 0000:00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control 0000:01:00.0 VGA compatible controller: nVidia Corporation NV36.4 [GeForce FX 5700VE] (rev a1) -- Pinnacle PCTV Rave saa7134 https://launchpad.net/malone/bugs/34351 From ersplus at free.fr Thu Apr 6 06:02:31 2006 From: ersplus at free.fr (Ersplus) Date: Thu, 06 Apr 2006 06:02:31 -0000 Subject: [Bug 34351] Re: Pinnacle PCTV Rave saa7134 References: <20060310194801.17018.83828.malonedeb@gangotri.ubuntu.com> Message-ID: <20060406060231.32233.43975.malone@gandwana.ubuntu.com> dmesg [4294667.296000] Linux version 2.6.15-20-k7 (buildd at vernadsky) (gcc version 4.0.3 (Ubuntu 4.0.3-1ubuntu3)) #1 SMP PREEMPT Tue Apr 4 19:26:13 UTC 2006 [4294667.296000] BIOS-provided physical RAM map: [4294667.296000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [4294667.296000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [4294667.296000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [4294667.296000] BIOS-e820: 0000000000100000 - 000000002fff0000 (usable) [4294667.296000] BIOS-e820: 000000002fff0000 - 000000002fff3000 (ACPI NVS) [4294667.296000] BIOS-e820: 000000002fff3000 - 0000000030000000 (ACPI data) [4294667.296000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [4294667.296000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [4294667.296000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) [4294667.296000] 0MB HIGHMEM available. [4294667.296000] 767MB LOWMEM available. [4294667.296000] found SMP MP-table at 000f55d0 [4294667.296000] On node 0 totalpages: 196592 [4294667.296000] DMA zone: 4096 pages, LIFO batch:0 [4294667.296000] DMA32 zone: 0 pages, LIFO batch:0 [4294667.296000] Normal zone: 192496 pages, LIFO batch:31 [4294667.296000] HighMem zone: 0 pages, LIFO batch:0 [4294667.296000] DMI 2.3 present. [4294667.296000] ACPI: RSDP (v000 VIAK8 ) @ 0x000f6f60 [4294667.296000] ACPI: RSDT (v001 VIAK8 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x2fff3000 [4294667.296000] ACPI: FADT (v001 VIAK8 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x2fff3040 [4294667.296000] ACPI: MADT (v001 VIAK8 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x2fff7ec0 [4294667.296000] ACPI: DSDT (v001 VIAK8 AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x00000000 [4294667.296000] ACPI: PM-Timer IO Port: 0x4008 [4294667.296000] ACPI: Local APIC address 0xfee00000 [4294667.296000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [4294667.296000] Processor #0 15:4 APIC version 16 [4294667.296000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [4294667.296000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [4294667.296000] IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23 [4294667.296000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [4294667.296000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [4294667.296000] ACPI: IRQ0 used by override. [4294667.296000] ACPI: IRQ2 used by override. [4294667.296000] ACPI: IRQ9 used by override. [4294667.296000] Enabling APIC mode: Flat. Using 1 I/O APICs [4294667.296000] Using ACPI (MADT) for SMP configuration information [4294667.296000] Allocating PCI resources starting at 40000000 (gap: 30000000:cec00000) [4294667.296000] Built 1 zonelists [4294667.296000] Kernel command line: root=/dev/hda6 ro quiet splash [4294667.296000] mapped APIC to ffffd000 (fee00000) [4294667.296000] mapped IOAPIC to ffffc000 (fec00000) [4294667.296000] Initializing CPU#0 [4294667.296000] PID hash table entries: 4096 (order: 12, 65536 bytes) [4294667.296000] Detected 2005.635 MHz processor. [4294667.296000] Using pmtmr for high-res timesource [4294667.296000] Console: colour VGA+ 80x25 [4294669.593000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [4294669.594000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [4294669.609000] Memory: 767744k/786368k available (2083k kernel code, 18012k reserved, 595k data, 328k init, 0k highmem) [4294669.609000] Checking if this processor honours the WP bit even in supervisor mode... Ok. [4294669.669000] Calibrating delay using timer specific routine.. 4011.98 BogoMIPS (lpj=2005993) [4294669.669000] Security Framework v1.0.0 initialized [4294669.669000] SELinux: Disabled at boot. [4294669.669000] Mount-cache hash table entries: 512 [4294669.669000] CPU: After generic identify, caps: 078bfbff e1d3fbff 00000000 00000000 00000000 00000000 00000000 [4294669.669000] CPU: After vendor identify, caps: 078bfbff e1d3fbff 00000000 00000000 00000000 00000000 00000000 [4294669.669000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [4294669.669000] CPU: L2 Cache: 1024K (64 bytes/line) [4294669.669000] CPU: After all inits, caps: 078bfbff e1d3fbff 00000000 00000010 00000000 00000000 00000000 [4294669.669000] mtrr: v2.0 (20020519) [4294669.669000] Enabling fast FPU save and restore... done. [4294669.669000] Enabling unmasked SIMD FPU exception support... done. [4294669.669000] Checking 'hlt' instruction... OK. [4294669.673000] SMP alternatives: switching to UP code [4294669.673000] checking if image is initramfs... it is [4294670.163000] Freeing initrd memory: 6529k freed [4294670.174000] ACPI: Looking for DSDT ... not found! [4294670.177000] CPU0: AMD Athlon(tm) 64 Processor 3200+ stepping 0a [4294670.178000] Total of 1 processors activated (4011.98 BogoMIPS). [4294670.178000] ENABLING IO-APIC IRQs [4294670.178000] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [4294670.289000] Brought up 1 CPUs [4294670.289000] NET: Registered protocol family 16 [4294670.289000] EISA bus registered [4294670.289000] ACPI: bus type pci registered [4294670.292000] PCI: PCI BIOS revision 2.10 entry at 0xfb8e0, last bus=1 [4294670.292000] PCI: Using configuration type 1 [4294670.292000] ACPI: Subsystem revision 20051216 [4294670.298000] ACPI: Interpreter enabled [4294670.298000] ACPI: Using IOAPIC for interrupt routing [4294670.298000] ACPI: PCI Root Bridge [PCI0] (0000:00) [4294670.298000] PCI: Probing PCI hardware (bus 00) [4294670.301000] Boot video device is 0000:01:00.0 [4294670.301000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [4294670.347000] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 10 11 *12) [4294670.347000] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 11 12) *5 [4294670.347000] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 *11 12) [4294670.347000] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 *11 12) [4294670.348000] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12) *0, disabled. [4294670.348000] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12) *0, disabled. [4294670.348000] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 6 7 10 11 12) *0, disabled. [4294670.349000] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 6 7 10 11 12) *0, disabled. [4294670.349000] ACPI: PCI Interrupt Link [ALKA] (IRQs 20) *0, disabled. [4294670.349000] ACPI: PCI Interrupt Link [ALKB] (IRQs 21) *0, disabled. [4294670.350000] ACPI: PCI Interrupt Link [ALKC] (IRQs 22) *0, disabled. [4294670.350000] ACPI: PCI Interrupt Link [ALKD] (IRQs 23) *0, disabled. [4294670.352000] Linux Plug and Play Support v0.97 (c) Adam Belay [4294670.352000] pnp: PnP ACPI init [4294670.356000] pnp: PnP ACPI: found 13 devices [4294670.356000] PnPBIOS: Disabled by ACPI PNP [4294670.356000] PCI: Using ACPI for IRQ routing [4294670.356000] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [4294670.377000] pnp: 00:01: ioport range 0x4000-0x407f could not be reserved [4294670.377000] pnp: 00:01: ioport range 0x5000-0x500f has been reserved [4294670.377000] PCI: Bridge: 0000:00:01.0 [4294670.377000] IO window: disabled. [4294670.377000] MEM window: e8000000-e9ffffff [4294670.377000] PREFETCH window: d0000000-dfffffff [4294670.377000] PCI: Setting latency timer of device 0000:00:01.0 to 64 [4294670.377000] audit: initializing netlink socket (disabled) [4294670.377000] audit(1144306260.375:1): initialized [4294670.377000] VFS: Disk quotas dquot_6.5.1 [4294670.377000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [4294670.377000] Initializing Cryptographic API [4294670.377000] io scheduler noop registered [4294670.377000] io scheduler anticipatory registered [4294670.377000] io scheduler deadline registered [4294670.377000] io scheduler cfq registered [4294670.378000] isapnp: Scanning for PnP cards... [4294670.734000] isapnp: No Plug & Play device found [4294670.745000] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [4294670.745000] PNP: PS/2 controller doesn't have AUX irq; using default 12 [4294670.745000] serio: i8042 AUX port at 0x60,0x64 irq 12 [4294670.745000] serio: i8042 KBD port at 0x60,0x64 irq 1 [4294670.745000] Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled [4294670.745000] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [4294670.746000] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [4294670.747000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [4294670.747000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [4294670.747000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [4294670.747000] ACPI: bus type ide registered [4294670.747000] mice: PS/2 mouse device common for all mice [4294670.747000] EISA: Probing bus 0 at eisa.0 [4294670.747000] Cannot allocate resource for EISA slot 4 [4294670.747000] Cannot allocate resource for EISA slot 5 [4294670.747000] EISA: Detected 0 cards. [4294670.747000] NET: Registered protocol family 2 [4294670.757000] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [4294670.757000] TCP established hash table entries: 131072 (order: 8, 1572864 bytes) [4294670.759000] TCP bind hash table entries: 65536 (order: 7, 786432 bytes) [4294670.760000] TCP: Hash tables configured (established 131072 bind 65536) [4294670.760000] TCP reno registered [4294670.760000] TCP bic registered [4294670.760000] NET: Registered protocol family 1 [4294670.760000] NET: Registered protocol family 8 [4294670.760000] NET: Registered protocol family 20 [4294670.760000] Using IPI No-Shortcut mode [4294670.760000] ACPI wakeup devices: [4294670.760000] PCI0 USB0 USB1 USB2 USB3 USB4 USB5 USB6 LAN0 AC97 UAR1 [4294670.760000] ACPI: (supports S0 S3 S4 S5) [4294670.760000] Freeing unused kernel memory: 328k freed [4294670.796000] input: AT Translated Set 2 keyboard as /class/input/input0 [4294670.817000] vga16fb: initializing [4294670.817000] vga16fb: mapped to 0xc00a0000 [4294670.944000] Console: switching to colour frame buffer device 80x25 [4294670.944000] fb0: VGA16 VGA frame buffer device [4294672.067000] Capability LSM initialized [4294672.092000] ACPI: Fan [FAN] (on) [4294672.097000] ACPI: Thermal Zone [THRM] (14 C) [4294672.518000] VP_IDE: IDE controller at PCI slot 0000:00:0f.0 [4294672.518000] **** SET: Misaligned resource pointer: ef3add02 Type 07 Len 0 [4294672.519000] ACPI: PCI Interrupt Link [ALKA] BIOS reported IRQ 0, using IRQ 20 [4294672.519000] ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 20 [4294672.519000] ACPI: PCI Interrupt 0000:00:0f.0[A] -> Link [ALKA] -> GSI 20 (level, low) -> IRQ 169 [4294672.519000] PCI: Via IRQ fixup for 0000:00:0f.0, from 255 to 9 [4294672.519000] VP_IDE: chipset revision 6 [4294672.519000] VP_IDE: not 100% native mode: will probe irqs later [4294672.519000] VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.0 [4294672.519000] ide0: BM-DMA at 0xd400-0xd407, BIOS settings: hda:DMA, hdb:pio [4294672.519000] ide1: BM-DMA at 0xd408-0xd40f, BIOS settings: hdc:DMA, hdd:DMA [4294672.519000] Probing IDE interface ide0... [4294672.908000] hda: ST3200021A, ATA DISK drive [4294673.521000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [4294673.521000] Probing IDE interface ide1... [4294674.317000] hdc: SONY DVD RW DW-U18A, ATAPI CD/DVD-ROM drive [4294675.032000] hdd: SONY DVD-ROM DDU1612, ATAPI CD/DVD-ROM drive [4294675.084000] ide1 at 0x170-0x177,0x376 on irq 15 [4294675.089000] hda: max request size: 1024KiB [4294675.098000] hda: 390721968 sectors (200049 MB) w/2048KiB Cache, CHS=24321/255/63, UDMA(100) [4294675.099000] hda: cache flushes supported [4294675.099000] hda: hda1 hda2 < hda5 hda6 hda7 hda8 hda9 hda10 > [4294675.182000] hdc: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33) [4294675.182000] Uniform CD-ROM driver Revision: 3.20 [4294675.190000] hdd: ATAPI 40X DVD-ROM drive, 512kB Cache, UDMA(33) [4294675.605000] usbcore: registered new driver usbfs [4294675.605000] usbcore: registered new driver hub [4294675.607000] USB Universal Host Controller Interface driver v2.3 [4294675.608000] **** SET: Misaligned resource pointer: ef3ad942 Type 07 Len 0 [4294675.608000] ACPI: PCI Interrupt Link [ALKB] BIOS reported IRQ 0, using IRQ 21 [4294675.608000] ACPI: PCI Interrupt Link [ALKB] enabled at IRQ 21 [4294675.608000] ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 177 [4294675.608000] PCI: Via IRQ fixup for 0000:00:10.0, from 12 to 1 [4294675.608000] uhci_hcd 0000:00:10.0: UHCI Host Controller [4294675.609000] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1 [4294675.609000] uhci_hcd 0000:00:10.0: irq 177, io base 0x0000d800 [4294675.610000] hub 1-0:1.0: USB hub found [4294675.610000] hub 1-0:1.0: 2 ports detected [4294675.712000] ACPI: PCI Interrupt 0000:00:10.1[A] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 177 [4294675.712000] PCI: Via IRQ fixup for 0000:00:10.1, from 12 to 1 [4294675.712000] uhci_hcd 0000:00:10.1: UHCI Host Controller [4294675.712000] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2 [4294675.712000] uhci_hcd 0000:00:10.1: irq 177, io base 0x0000dc00 [4294675.712000] hub 2-0:1.0: USB hub found [4294675.712000] hub 2-0:1.0: 2 ports detected [4294675.813000] ACPI: PCI Interrupt 0000:00:10.2[B] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 177 [4294675.813000] PCI: Via IRQ fixup for 0000:00:10.2, from 5 to 1 [4294675.813000] uhci_hcd 0000:00:10.2: UHCI Host Controller [4294675.814000] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3 [4294675.814000] uhci_hcd 0000:00:10.2: irq 177, io base 0x0000e000 [4294675.814000] hub 3-0:1.0: USB hub found [4294675.814000] hub 3-0:1.0: 2 ports detected [4294675.915000] ACPI: PCI Interrupt 0000:00:10.3[B] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 177 [4294675.915000] PCI: Via IRQ fixup for 0000:00:10.3, from 5 to 1 [4294675.915000] uhci_hcd 0000:00:10.3: UHCI Host Controller [4294675.916000] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4 [4294675.916000] uhci_hcd 0000:00:10.3: irq 177, io base 0x0000e400 [4294675.916000] hub 4-0:1.0: USB hub found [4294675.916000] hub 4-0:1.0: 2 ports detected [4294675.917000] usb 1-1: new low speed USB device using uhci_hcd and address 2 [4294676.020000] ACPI: PCI Interrupt 0000:00:10.4[C] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 177 [4294676.020000] PCI: Via IRQ fixup for 0000:00:10.4, from 11 to 1 [4294676.020000] ehci_hcd 0000:00:10.4: EHCI Host Controller [4294676.020000] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 5 [4294676.020000] ehci_hcd 0000:00:10.4: irq 177, io mem 0xea404000 [4294676.020000] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [4294676.020000] hub 5-0:1.0: USB hub found [4294676.020000] hub 5-0:1.0: 8 ports detected [4294676.288000] Attempting manual resume [4294676.317000] EXT3-fs: mounted filesystem with ordered data mode. [4294676.317000] kjournald starting. Commit interval 5 seconds [4294676.436000] usb 1-1: device not accepting address 2, error -71 [4294678.197000] usb 1-1: new low speed USB device using uhci_hcd and address 4 [4294678.574000] usb 1-2: new full speed USB device using uhci_hcd and address 5[4294679.027000] usb 2-1: new full speed USB device using uhci_hcd and address 2[4294679.141000] usb 2-1: device descriptor read/64, error -71 [4294679.356000] usb 2-1: device descriptor read/64, error -71 [4294679.559000] usb 2-1: new full speed USB device using uhci_hcd and address 3[4294679.673000] usb 2-1: device descriptor read/64, error -71 [4294679.888000] usb 2-1: device descriptor read/64, error -71 [4294680.091000] usb 2-1: new full speed USB device using uhci_hcd and address 4[4294680.501000] usb 2-1: device not accepting address 4, error -71 [4294680.603000] usb 2-1: new full speed USB device using uhci_hcd and address 5[4294681.013000] usb 2-1: device not accepting address 5, error -71 [4294681.219000] usb 3-2: new full speed USB device using uhci_hcd and address 2[4294681.563000] usb 4-1: new low speed USB device using uhci_hcd and address 2 [4294684.995000] Linux video capture interface: v1.00 [4294685.261000] Linux agpgart interface v0.101 (c) Dave Jones [4294685.262000] agpgart: Detected AGP bridge 0 [4294685.266000] agpgart: AGP aperture is 128M @ 0xe0000000 [4294685.277000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [4294685.321000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [4294685.379000] ieee1394: Initialized config rom entry `ip1394' [4294685.388000] ohci1394: $Rev: 1313 $ Ben Collins [4294685.388000] ACPI: PCI Interrupt 0000:00:0e.0[A] -> GSI 19 (level, low) -> IRQ 185 [4294685.388000] PCI: Via IRQ fixup for 0000:00:0e.0, from 11 to 9 [4294685.397000] saa7130/34: v4l2 driver version 0.2.14 loaded [4294685.397000] ACPI: PCI Interrupt 0000:00:06.0[A] -> GSI 17 (level, low) -> IRQ 193 [4294685.398000] saa7134[0]: found at 0000:00:06.0, rev: 1, irq: 193, latency: 32, mmio: 0xea402000 [4294685.398000] saa7134[0]: subsystem: 16be:0003, board: Medion 7134 [card=12,autodetected] [4294685.398000] saa7134[0]: board init: gpio is 0 [4294685.442000] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[185] MMIO=[ea403000-ea4037ff] Max Packet=[2048] [4294685.521000] saa7134[0]: i2c eeprom 00: be 16 03 00 08 20 1c 55 43 43 a9 1c 55 43 43 a9 [4294685.521000] saa7134[0]: i2c eeprom 10: ff ff ff ff 15 00 0e 01 0c c0 08 00 00 00 00 00 [4294685.521000] saa7134[0]: i2c eeprom 20: 00 00 00 e3 ff ff ff ff ff ff ff ff ff ff ff ff [4294685.521000] saa7134[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [4294685.521000] saa7134[0]: i2c eeprom 40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [4294685.521000] saa7134[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [4294685.521000] saa7134[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [4294685.521000] saa7134[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [4294685.527000] saa7134[0] Tuner type is 38 [4294685.573000] tuner 0-0060: All bytes are equal. It is not a TEA5767 [4294685.573000] tuner 0-0060: chip found @ 0xc0 (saa7134[0]) [4294685.573000] tuner 0-0060: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3)) [4294685.596000] nvidia: module license 'NVIDIA' taints kernel. [4294685.609000] tda9887 0-0043: chip found @ 0x86 (saa7134[0]) [4294685.612000] saa7134[0]: registered device video0 [v4l2] [4294685.612000] saa7134[0]: registered device vbi0 [4294685.612000] saa7134[0]: registered device radio0 [4294685.618000] ACPI: PCI Interrupt 0000:00:07.0[A] -> GSI 18 (level, low) -> IRQ 201 [4294685.618000] rt2500 1.1.0 BETA3 2005/07/31 http://rt2x00.serialmonkey.com [4294685.618000] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 209 [4294685.619000] NVRM: loading NVIDIA Linux x86 NVIDIA Kernel Module 1.0-8178 Wed Dec 14 16:22:51 PST 2005 [4294685.994000] Real Time Clock Driver v1.12 [4294686.006000] input: PC Speaker as /class/input/input1 [4294686.054000] Floppy drive(s): fd0 is 1.44M [4294686.070000] FDC 0 is a post-1991 82077 [4294686.126000] usbcore: registered new driver hiddev [4294686.155000] input: Microsoft Microsoft IntelliMouse� Optical as /class/input/input2 [4294686.155000] input: USB HID v1.00 Mouse [Microsoft Microsoft IntelliMouse� Optical] on usb-0000:00:10.0-1 [4294686.155000] usbcore: registered new driver usbhid [4294686.155000] drivers/usb/input/hid-core.c: v2.6:USB HID core driver [4294686.165000] parport: PnPBIOS parport detected. [4294686.165000] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA] [4294686.479000] ts: Compaq touchscreen protocol output [4294686.543000] SCSI subsystem initialized [4294686.577000] input: X10 Wireless Technology Inc USB Receiver as /class/input/input3 [4294686.577000] usbcore: registered new driver ati_remote [4294686.577000] drivers/usb/input/ati_remote.c: Registered USB driver ATI/X10 RF USB Remote Control v. 2.2.1 [4294686.584000] drivers/usb/input/ati_remote.c: Weird data, len=1 ff 00 00 00 00 00 ... [4294686.670000] pwc Philips webcam module version 10.0.7-unofficial loaded. [4294686.670000] pwc Supports Philips PCA645/646, PCVC675/680/690, PCVC720[40]/730/740/750 & PCVC830/840. [4294686.670000] pwc Also supports the Askey VC010, various Logitech Quickcams, Samsung MPC-C10 and MPC-C30, [4294686.670000] pwc the Creative WebCam 5 & Pro Ex, SOTEC Afina Eye and Visionite VCS-UC300 and VCS-UM100. [4294686.670000] pwc Trace options: 0x00a1 [4294686.670000] pwc Philips PCVC730K (ToUCam Fun)/PCVC830 (ToUCam II) USB webcam detected. [4294686.697000] pwc Registered as /dev/video1. [4294686.697000] usbcore: registered new driver Philips webcam [4294686.703000] Initializing USB Mass Storage driver... [4294686.711000] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0010dc000056ebb4][4294686.737000] via82xx: Assuming DXS channels with 48k fixed sample rate. [4294686.737000] Please try dxs_support=5 option [4294686.737000] and report if it works on your machine. [4294686.737000] For more details, read ALSA-Configuration.txt. [4294686.737000] **** SET: Misaligned resource pointer: e9a5ff02 Type 07 Len 0 [4294686.737000] ACPI: PCI Interrupt Link [ALKC] BIOS reported IRQ 0, using IRQ 22 [4294686.737000] ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22 [4294686.737000] ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [ALKC] -> GSI 22 (level, low) -> IRQ 217 [4294686.737000] PCI: Via IRQ fixup for 0000:00:11.5, from 11 to 9 [4294686.737000] PCI: Setting latency timer of device 0000:00:11.5 to 64 [4294686.750000] usbcore: registered new driver snd-usb-audio [4294686.754000] scsi0 : SCSI emulation for USB Mass Storage devices [4294686.754000] usb-storage: device found at 2 [4294686.754000] usb-storage: waiting for device to settle before scanning [4294686.754000] usbcore: registered new driver usb-storage [4294686.754000] USB Mass Storage support registered. [4294687.634000] lp0: using parport0 (interrupt-driven). [4294687.658000] sbp2: $Rev: 1306 $ Ben Collins [4294687.658000] ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1)[4294687.658000] ieee1394: sbp2: Try serialize_io=0 for better performance [4294687.705000] Adding 979924k swap on /dev/hda7. Priority:-1 extents:1 across:979924k [4294687.819000] EXT3 FS on hda6, internal journal [4294687.949000] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 [4294687.949000] md: bitmap version 4.39 [4294688.621000] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel at redhat.com [4294688.668000] NET: Registered protocol family 10 [4294688.668000] lo: Disabled Privacy Extensions [4294688.668000] IPv6 over IPv4 tunneling driver [4294688.986000] cdrom: open failed. [4294689.432000] cdrom: open failed. [4294689.433000] cdrom: open failed. [4294691.791000] Vendor: Generic Model: Card Reader CF Rev: v1.0 [4294691.791000] Type: Direct-Access ANSI SCSI revision: 00 [4294691.795000] Vendor: Generic Model: Card Reader MS Rev: v1.0 [4294691.795000] Type: Direct-Access ANSI SCSI revision: 00 [4294691.798000] Vendor: Generic Model: Card ReadeMMC/SD Rev: v1.0 [4294691.798000] Type: Direct-Access ANSI SCSI revision: 00 [4294691.801000] Vendor: Generic Model: Card Reader SM Rev: v1.0 [4294691.801000] Type: Direct-Access ANSI SCSI revision: 00 [4294691.802000] usb-storage: device scan complete [4294691.872000] sd 0:0:0:0: Attached scsi removable disk sda [4294691.887000] sd 0:0:0:1: Attached scsi removable disk sdb [4294691.902000] sd 0:0:0:2: Attached scsi removable disk sdc [4294691.916000] sd 0:0:0:3: Attached scsi removable disk sdd [4294691.943000] sd 0:0:0:0: Attached scsi generic sg0 type 0 [4294691.943000] sd 0:0:0:1: Attached scsi generic sg1 type 0 [4294691.943000] sd 0:0:0:2: Attached scsi generic sg2 type 0 [4294691.944000] sd 0:0:0:3: Attached scsi generic sg3 type 0 [4294694.369000] kjournald starting. Commit interval 5 seconds [4294694.369000] EXT3 FS on hda8, internal journal [4294694.369000] EXT3-fs: mounted filesystem with ordered data mode. [4294694.559000] kjournald starting. Commit interval 5 seconds [4294694.559000] EXT3 FS on hda10, internal journal [4294694.559000] EXT3-fs: mounted filesystem with ordered data mode. [4294695.583000] ACPI: Power Button (FF) [PWRF] [4294695.583000] ACPI: Power Button (CM) [PWRB] [4294695.661000] ibm_acpi: ec object not found [4294695.679000] pcc_acpi: loading... [4294696.092000] powernow-k8: Found 1 AMD Athlon 64 / Opteron processors (version 1.50.4) [4294696.092000] powernow-k8: 0 : fid 0xc (2000 MHz), vid 0x2 (1500 mV) [4294696.092000] powernow-k8: 1 : fid 0xa (1800 MHz), vid 0x6 (1400 mV) [4294696.092000] powernow-k8: 2 : fid 0x2 (1000 MHz), vid 0x12 (1100 mV) [4294696.092000] cpu_init done, current fid 0xc, vid 0x2 [4294698.669000] ra0: no IPv6 routers present [4294698.978000] NVRM: not using NVAGP, an AGPGART backend is loaded! [4294699.211000] NVRM: not using NVAGP, an AGPGART backend is loaded! [4294700.868000] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac) [4294700.868000] apm: overridden by ACPI. [4294701.909000] ra0 (WE) : Driver using old /proc/net/wireless support, please fix driver ! [4294704.766000] hdc: drive_cmd: status=0x51 { DriveReady SeekComplete Error } [4294704.766000] hdc: drive_cmd: error=0x04 { AbortedCommand } [4294704.766000] ide: failed opcode was: 0xec [4294704.771000] hdd: drive_cmd: status=0x51 { DriveReady SeekComplete Error } [4294704.771000] hdd: drive_cmd: error=0x04 { AbortedCommand } [4294704.771000] ide: failed opcode was: 0xec [4294705.103000] hdc: drive_cmd: status=0x51 { DriveReady SeekComplete Error } [4294705.103000] hdc: drive_cmd: error=0x04 { AbortedCommand } [4294705.103000] ide: failed opcode was: 0xec [4294705.108000] hdd: drive_cmd: status=0x51 { DriveReady SeekComplete Error } [4294705.108000] hdd: drive_cmd: error=0x04 { AbortedCommand } [4294705.108000] ide: failed opcode was: 0xec [4294705.698000] Bluetooth: Core ver 2.8 [4294705.698000] NET: Registered protocol family 31 [4294705.698000] Bluetooth: HCI device and connection manager initialized [4294705.698000] Bluetooth: HCI socket layer initialized [4294705.774000] Bluetooth: L2CAP ver 2.8 [4294705.774000] Bluetooth: L2CAP socket layer initialized [4294705.834000] Bluetooth: RFCOMM socket layer initialized [4294705.834000] Bluetooth: RFCOMM TTY layer initialized [4294705.834000] Bluetooth: RFCOMM ver 1.7 [4298016.211000] saa7134[0]/irq[10,3048915]: r=0x20 s=0x10 PE [4298016.211000] saa7134[0]/irq: looping -- clearing PE (parity error!) enable b ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Needs Info => Confirmed -- Pinnacle PCTV Rave saa7134 https://launchpad.net/malone/bugs/34351 From petra at pegu.de Thu Apr 6 06:15:54 2006 From: petra at pegu.de (gelbehexe) Date: Thu, 06 Apr 2006 06:15:54 -0000 Subject: [Bug 38327] nvidia-gx driver seems not to work since 2.6.15-19 References: <20060406061555.24516.98284.malonedeb@gangotri.ubuntu.com> Message-ID: <20060406061555.24516.98284.malonedeb@gangotri.ubuntu.com> Public bug reported: Affects: linux-meta linux-image-k7 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: Since upgrade to linux-image 2.6.15-19-k7 the nvidia kernel module fails to load. This also affects 2.6.15-20-k7. In both cases the 386 build works. Also 2.6.15-18-k7 works fine. My system: AMD K7 1800 Nvidia FX5200 1 GB RAM my Xorg.0.log: X Window System Version 7.0.0 Release Date: 21 December 2005 X Protocol Version 11, Revision 0, Release 7.0 Build Operating System:Linux 2.6.12 i686 Current Operating System: Linux wspetra 2.6.15-20-k7 #1 SMP PREEMPT Tue Apr 4 19:26:13 UTC 2006 i686 Build Date: 16 March 2006 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Module Loader present Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Thu Apr 6 07:40:15 2006 (==) Using config file: "/etc/X11/xorg.conf" (==) ServerLayout "Default Layout" (**) |-->Screen "Default Screen" (0) (**) | |-->Monitor "Standardbildschirm" (**) | |-->Device "Standardgrafikkarte" (**) |-->Input Device "Generic Keyboard" (**) |-->Input Device "Configured Mouse" (WW) The directory "/usr/share/X11/fonts/cyrillic" does not exist. Entry deleted from font path. (**) FontPath set to "/usr/share/X11/fonts/misc,/usr/share/X11/fonts/100dpi/:unscaled,/usr/share/X11/fonts/75dpi/:unscaled,/usr/share/X11/fonts/Type1,/usr/share/X11/fonts/100dpi,/usr/share/X11/fonts/75dpi,/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" (==) RgbPath set to "/etc/X11/rgb" (==) ModulePath set to "/usr/lib/xorg/modules" (II) Module ABI versions: X.Org ANSI C Emulation: 0.2 X.Org Video Driver: 0.8 X.Org XInput driver : 0.5 X.Org Server Extension : 0.2 X.Org Font Renderer : 0.4 (II) Loader running on linux (II) LoadModule: "bitmap" (II) Loading /usr/lib/xorg/modules/fonts/libbitmap.so (II) Module bitmap: vendor="X.Org Foundation" compiled for 7.0.0, module version = 1.0.0 Module class: X.Org Font Renderer ABI class: X.Org Font Renderer, version 0.4 (II) Loading font Bitmap (II) LoadModule: "pcidata" (II) Loading /usr/lib/xorg/modules/libpcidata.so (II) Module pcidata: vendor="X.Org Foundation" compiled for 7.0.0, module version = 1.0.0 ABI class: X.Org Video Driver, version 0.8 (--) using VT number 7 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 1039,0745 card 0000,0000 rev 01 class 06,00,00 hdr 80 (II) PCI: 00:01:0: chip 1039,0001 card 0000,0000 rev 00 class 06,04,00 hdr 01 (II) PCI: 00:02:0: chip 1039,0018 card 0000,0000 rev 00 class 06,01,00 hdr 80 (II) PCI: 00:02:1: chip 1039,0016 card 0000,0000 rev 00 class 0c,05,00 hdr 00 (II) PCI: 00:02:2: chip 1039,7001 card 1019,0a41 rev 07 class 0c,03,10 hdr 00 (II) PCI: 00:02:3: chip 1039,7001 card 1019,0a41 rev 07 class 0c,03,10 hdr 00 (II) PCI: 00:02:5: chip 1039,5513 card 1019,0a41 rev d0 class 01,01,80 hdr 80 (II) PCI: 00:02:7: chip 1039,7012 card 1019,0a41 rev a0 class 04,01,00 hdr 00 (II) PCI: 00:0b:0: chip 1106,3106 card 1186,1403 rev 86 class 02,00,00 hdr 00 (II) PCI: 00:0d:0: chip 1131,7134 card 4e42,0138 rev 01 class 04,80,00 hdr 00 (II) PCI: 01:00:0: chip 10de,0322 card 1043,80df rev a1 class 03,00,00 hdr 00 (II) PCI: End of PCI scan (II) Host-to-PCI bridge: (II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set) (II) Bus 0 I/O range: [0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B] (II) Bus 0 non-prefetchable memory range: [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] (II) Bus 0 prefetchable memory range: [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] (II) PCI-to-PCI bridge: (II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000e (VGA_EN is set) (II) Bus 1 non-prefetchable memory range: [0] -1 0 0xec000000 - 0xedffffff (0x2000000) MX[B] (II) Bus 1 prefetchable memory range: [0] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[B] (II) PCI-to-ISA bridge: (II) Bus -1: bridge is at (0:2:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set) (--) PCI:*(1:0:0) nVidia Corporation NV34 [GeForce FX 5200] rev 161, Mem @ 0xec000000/24, 0xe0000000/27 (II) Addressable bus resource ranges are [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] [1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B] (II) OS-reported resource ranges: [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] (II) PCI Memory resource overlap reduced 0xe8000000 from 0xebffffff to 0xe7ffffff (II) Active PCI resource ranges: [0] -1 0 0xef003000 - 0xef0033ff (0x400) MX[B] [1] -1 0 0xef001000 - 0xef0010ff (0x100) MX[B] [2] -1 0 0xef000000 - 0xef000fff (0x1000) MX[B] [3] -1 0 0xef002000 - 0xef002fff (0x1000) MX[B] [4] -1 0 0xe8000000 - 0xe7ffffff (0x0) MX[B]O [5] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[B](B) [6] -1 0 0xec000000 - 0xecffffff (0x1000000) MX[B](B) [7] -1 0 0x0000e000 - 0x0000e0ff (0x100) IX[B] [8] -1 0 0x0000dc00 - 0x0000dc3f (0x40) IX[B] [9] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B] [10] -1 0 0x00004000 - 0x0000400f (0x10) IX[B] [11] -1 0 0x00005080 - 0x0000509f (0x20) IX[B] (II) Active PCI resource ranges after removing overlaps: [0] -1 0 0xef003000 - 0xef0033ff (0x400) MX[B] [1] -1 0 0xef001000 - 0xef0010ff (0x100) MX[B] [2] -1 0 0xef000000 - 0xef000fff (0x1000) MX[B] [3] -1 0 0xef002000 - 0xef002fff (0x1000) MX[B] [4] -1 0 0xe8000000 - 0xe7ffffff (0x0) MX[B]O [5] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[B](B) [6] -1 0 0xec000000 - 0xecffffff (0x1000000) MX[B](B) [7] -1 0 0x0000e000 - 0x0000e0ff (0x100) IX[B] [8] -1 0 0x0000dc00 - 0x0000dc3f (0x40) IX[B] [9] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B] [10] -1 0 0x00004000 - 0x0000400f (0x10) IX[B] [11] -1 0 0x00005080 - 0x0000509f (0x20) IX[B] (II) OS-reported resource ranges after removing overlaps with PCI: [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] (II) All system resource ranges: [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0 0xef003000 - 0xef0033ff (0x400) MX[B] [6] -1 0 0xef001000 - 0xef0010ff (0x100) MX[B] [7] -1 0 0xef000000 - 0xef000fff (0x1000) MX[B] [8] -1 0 0xef002000 - 0xef002fff (0x1000) MX[B] [9] -1 0 0xe8000000 - 0xe7ffffff (0x0) MX[B]O [10] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[B](B) [11] -1 0 0xec000000 - 0xecffffff (0x1000000) MX[B](B) [12] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [13] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [14] -1 0 0x0000e000 - 0x0000e0ff (0x100) IX[B] [15] -1 0 0x0000dc00 - 0x0000dc3f (0x40) IX[B] [16] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B] [17] -1 0 0x00004000 - 0x0000400f (0x10) IX[B] [18] -1 0 0x00005080 - 0x0000509f (0x20) IX[B] (II) LoadModule: "bitmap" (II) Reloading /usr/lib/xorg/modules/fonts/libbitmap.so (II) Loading font Bitmap (II) LoadModule: "ddc" (II) Loading /usr/lib/xorg/modules/libddc.so (II) Module ddc: vendor="X.Org Foundation" compiled for 7.0.0, module version = 1.0.0 ABI class: X.Org Video Driver, version 0.8 (II) LoadModule: "extmod" (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so (II) Module extmod: vendor="X.Org Foundation" compiled for 7.0.0, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 0.2 (II) Loading extension SHAPE (II) Loading extension MIT-SUNDRY-NONSTANDARD (II) Loading extension BIG-REQUESTS (II) Loading extension SYNC (II) Loading extension MIT-SCREEN-SAVER (II) Loading extension XC-MISC (II) Loading extension XFree86-VidModeExtension (II) Loading extension XFree86-Misc (II) Loading extension XFree86-DGA (II) Loading extension DPMS (II) Loading extension TOG-CUP (II) Loading extension Extended-Visual-Information (II) Loading extension XVideo (II) Loading extension XVideo-MotionCompensation (II) Loading extension X-Resource (II) LoadModule: "freetype" (II) Loading /usr/lib/xorg/modules/fonts/libfreetype.so (II) Module freetype: vendor="X.Org Foundation & the After X-TT Project" compiled for 7.0.0, module version = 2.1.0 Module class: X.Org Font Renderer ABI class: X.Org Font Renderer, version 0.4 (II) Loading font FreeType (II) LoadModule: "glx" (II) Loading /usr/lib/xorg/modules/libglx.so (II) Module glx: vendor="NVIDIA Corporation" compiled for 4.0.2, module version = 1.0.8178 Module class: XFree86 Server Extension ABI class: XFree86 Server Extension, version 0.1 (II) Loading extension GLX (II) LoadModule: "int10" (II) Loading /usr/lib/xorg/modules/libint10.so (II) Module int10: vendor="X.Org Foundation" compiled for 7.0.0, module version = 1.0.0 ABI class: X.Org Video Driver, version 0.8 (II) LoadModule: "type1" (II) Loading /usr/lib/xorg/modules/fonts/libtype1.so (II) Module type1: vendor="X.Org Foundation" compiled for 7.0.0, module version = 1.0.2 Module class: X.Org Font Renderer ABI class: X.Org Font Renderer, version 0.4 (II) Loading font Type1 (II) LoadModule: "vbe" (II) Loading /usr/lib/xorg/modules/libvbe.so (II) Module vbe: vendor="X.Org Foundation" compiled for 7.0.0, module version = 1.1.0 ABI class: X.Org Video Driver, version 0.8 (II) LoadModule: "nvidia" (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.o (II) Module nvidia: vendor="NVIDIA Corporation" compiled for 4.0.2, module version = 1.0.8178 Module class: XFree86 Video Driver (II) LoadModule: "kbd" (II) Loading /usr/lib/xorg/modules/input/kbd_drv.so (II) Module kbd: vendor="X.Org Foundation" compiled for 7.0.0, module version = 1.0.1 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 0.5 (II) LoadModule: "mouse" (II) Loading /usr/lib/xorg/modules/input/mouse_drv.so (II) Module mouse: vendor="X.Org Foundation" compiled for 6.99.99.904, module version = 1.0.3 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 0.5 (II) NVIDIA X Driver 1.0-8178 Wed Dec 14 16:25:22 PST 2005 (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs (II) Primary Device is: PCI 01:00:0 (--) Chipset NVIDIA GPU found (II) resource ranges after xf86ClaimFixedResources() call: [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0 0xef003000 - 0xef0033ff (0x400) MX[B] [6] -1 0 0xef001000 - 0xef0010ff (0x100) MX[B] [7] -1 0 0xef000000 - 0xef000fff (0x1000) MX[B] [8] -1 0 0xef002000 - 0xef002fff (0x1000) MX[B] [9] -1 0 0xe8000000 - 0xe7ffffff (0x0) MX[B]O [10] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[B](B) [11] -1 0 0xec000000 - 0xecffffff (0x1000000) MX[B](B) [12] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [13] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [14] -1 0 0x0000e000 - 0x0000e0ff (0x100) IX[B] [15] -1 0 0x0000dc00 - 0x0000dc3f (0x40) IX[B] [16] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B] [17] -1 0 0x00004000 - 0x0000400f (0x10) IX[B] [18] -1 0 0x00005080 - 0x0000509f (0x20) IX[B] (II) resource ranges after probing: [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0 0xef003000 - 0xef0033ff (0x400) MX[B] [6] -1 0 0xef001000 - 0xef0010ff (0x100) MX[B] [7] -1 0 0xef000000 - 0xef000fff (0x1000) MX[B] [8] -1 0 0xef002000 - 0xef002fff (0x1000) MX[B] [9] -1 0 0xe8000000 - 0xe7ffffff (0x0) MX[B]O [10] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[B](B) [11] -1 0 0xec000000 - 0xecffffff (0x1000000) MX[B](B) [12] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B] [13] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B] [14] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B] [15] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [16] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [17] -1 0 0x0000e000 - 0x0000e0ff (0x100) IX[B] [18] -1 0 0x0000dc00 - 0x0000dc3f (0x40) IX[B] [19] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B] [20] -1 0 0x00004000 - 0x0000400f (0x10) IX[B] [21] -1 0 0x00005080 - 0x0000509f (0x20) IX[B] [22] 0 0 0xed0003b0 - 0xed0003bb (0xc) IS[B] [23] 0 0 0xed0003c0 - 0xed0003df (0x20) IS[B] (II) Setting vga for screen 0. (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32 (==) NVIDIA(0): RGB weight 888 (==) NVIDIA(0): Default visual is TrueColor (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0) (EE) NVIDIA(0): Failed to load the NVIDIA kernel module! (EE) NVIDIA(0): *** Aborting *** (II) UnloadModule: "nvidia" (EE) Screen(s) found, but none have a usable configuration. Fatal server error: no screens found -- nvidia-gx driver seems not to work since 2.6.15-19 https://launchpad.net/malone/bugs/38327 From martin.pitt at ubuntu.com Thu Apr 6 06:36:22 2006 From: martin.pitt at ubuntu.com (Martin Pitt) Date: Thu, 06 Apr 2006 06:36:22 -0000 Subject: [Bug 38329] bcm43xx needs manual treatment after resume References: <20060406063622.24516.46464.malonedeb@gangotri.ubuntu.com> Message-ID: <20060406063622.24516.46464.malonedeb@gangotri.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: With network-manager, the Airport Extreme (on ppc) works smooth as silk with the current (20.30) kernel. Even without the initial iwconfig calls that are required to make it work with ifupdown :). However, it still needs manual intervention after resuming. After that, scanning for networks (or connecting to the previous SSID) doesn't work any more. I have to manually do 'iwconfig ethX rate auto', then it works again. Is it possible to fix that in the driver itself, so that we don't need to spread a special /etc/apm/resume.d script? -- bcm43xx needs manual treatment after resume https://launchpad.net/malone/bugs/38329 From robitaille at gmail.com Thu Apr 6 06:58:23 2006 From: robitaille at gmail.com (Daniel Robitaille) Date: Thu, 06 Apr 2006 06:58:23 -0000 Subject: [Bug 38333] Hibernation stopped working with Flight 6 on Dell Latitude 110l References: <20060406065824.24486.88971.malonedeb@gangotri.ubuntu.com> Message-ID: <20060406065824.24486.88971.malonedeb@gangotri.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: Since installing Flight 6, hibernation doesn't work on my Dell Latitude 110l. It was working fine with Flight 5 (and before in Dapper and Breezy). When attempted a hibernation, the laptop turns itself off normally. But on the way back up, it simply does a normal boot. And everytime a hibernation is attempted, my swap partition ends up being corrupted, and I have to reformat it as swap (using gparted) to be usable again. This bug was seen with linux-image-2.6.15-20.30_i386 released a few hours ago. -- Hibernation stopped working with Flight 6 on Dell Latitude 110l https://launchpad.net/malone/bugs/38333 From sfabel at gmx.net Thu Apr 6 07:15:09 2006 From: sfabel at gmx.net (Stephan Fabel) Date: Thu, 06 Apr 2006 07:15:09 -0000 Subject: [Bug 32072] Re: bugs in k8 SMP kernel References: <20060220040755.1387.38329.malonedeb@gangotri.ubuntu.com> Message-ID: <20060406071509.24486.43244.malone@gangotri.ubuntu.com> Same thing happened here with newest Dapper (Flight-6 default install) when trying to mount an XFS partition. PC is down at the moment, so can't post more, but it was the default packages of the i386 CD on a AMD64 X2 Dual-Core system. This behavior didn't change even after installing the SMP-k7 kernel packages. Flight-5 AMD64 CD worked fine. -- bugs in k8 SMP kernel https://launchpad.net/malone/bugs/32072 From hostmaster at grawert.net Thu Apr 6 07:39:04 2006 From: hostmaster at grawert.net (Oliver Grawert) Date: Thu, 06 Apr 2006 07:39:04 -0000 Subject: [Bug 18489] Re: mice detected as imps2 not as ps2++ References: <20060113135641.21012.86896.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060406073905.32313.42060.malone@gandwana.ubuntu.com> yes, and thus belongs to xserver-xorg, not x11-common :) ** Changed in: x11-common (Ubuntu) Sourcepackagename: x11-common => xserver-xorg -- mice detected as imps2 not as ps2++ https://launchpad.net/malone/bugs/18489 From steven.w.j.brown at gmail.com Thu Apr 6 07:42:08 2006 From: steven.w.j.brown at gmail.com (Steven Brown) Date: Thu, 06 Apr 2006 07:42:08 -0000 Subject: [Bug 35101] Re: Wacom support completely broken now References: <20060315201206.6537.5926.malonedeb@gangotri.ubuntu.com> Message-ID: <20060406074208.32313.14940.malone@gandwana.ubuntu.com> MF: Gimp wasn't even detecting any extended input devices. It seems the tablet works if I have it plugged in when starting X, and until I unplug it. But if I plug it in any time after starting - it is handled as a regular input device using uhci_hcd. -- Wacom support completely broken now https://launchpad.net/malone/bugs/35101 From 84yelo3 at gmail.com Thu Apr 6 07:42:20 2006 From: 84yelo3 at gmail.com (=?utf-8?q?Nicol=C3=B2_Chieffo?=) Date: Thu, 06 Apr 2006 07:42:20 -0000 Subject: [Bug 24270] Re: Screen flickering References: <20060113142814.21012.74045.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060406074220.32233.35703.malone@gandwana.ubuntu.com> Nobody seems to have this bug assigned! let's put it to unconfirmed to see if any mantainer gets it ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Confirmed => Unconfirmed -- Screen flickering https://launchpad.net/malone/bugs/24270 From r.steiger at quick.cz Thu Apr 6 07:45:15 2006 From: r.steiger at quick.cz (lyon) Date: Thu, 06 Apr 2006 07:45:15 -0000 Subject: [Bug 38342] initrd missing References: <20060406074515.32313.67931.malonedeb@gandwana.ubuntu.com> Message-ID: <20060406074515.32313.67931.malonedeb@gandwana.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 linux-image-2.6.15-20-386 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: It seems like initrd.img is missing in this kernel release. Apt fails to complete setting up package. Ubuntu Dapper (up-to-dated on 6. 4. 2006) linux-image-2.6.15-20-386_2.6.15-20.30_i386.deb -- initrd missing https://launchpad.net/malone/bugs/38342 From scott at ubuntu.com Thu Apr 6 07:46:48 2006 From: scott at ubuntu.com (Scott James Remnant) Date: Thu, 06 Apr 2006 07:46:48 -0000 Subject: [Bug 18489] Re: mice detected as imps2 not as ps2++ References: <20060113135641.21012.86896.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060406074648.24486.68400.malone@gangotri.ubuntu.com> oh, x11-common was the package that owned /usr/bin/dexconf :) -- mice detected as imps2 not as ps2++ https://launchpad.net/malone/bugs/18489 From dicicat at free.fr Thu Apr 6 07:57:04 2006 From: dicicat at free.fr (DiCiCat) Date: Thu, 06 Apr 2006 07:57:04 -0000 Subject: [Bug 38278] Re: wifi card don't work. isl3886 is required but not installed References: <20060405203926.24486.7083.malonedeb@gangotri.ubuntu.com> Message-ID: <20060406075705.24516.97094.malone@gangotri.ubuntu.com> Same "bug" as 38273. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Unconfirmed => Confirmed -- wifi card don't work. isl3886 is required but not installed https://launchpad.net/malone/bugs/38278 From dennis at kaarsemaker.net Thu Apr 6 08:08:45 2006 From: dennis at kaarsemaker.net (Dennis Kaarsemaker) Date: Thu, 06 Apr 2006 08:08:45 -0000 Subject: [Bug 38285] Re: [Bug 38285] Version 2.6.15.19 depends of linux-image-2.6.15-20-k7 References: <20060405213311.24486.4040.malonedeb@gangotri.ubuntu.com> Message-ID: <1144310925.5339.22.camel@mirage> severity Minor status Confirmed ** Changed in: linux-meta linux-image-k7 (Ubuntu) Severity: Normal => Minor Status: Unconfirmed => Confirmed -- Version 2.6.15.19 depends of linux-image-2.6.15-20-k7 https://launchpad.net/malone/bugs/38285 From 84yelo3 at gmail.com Thu Apr 6 08:07:54 2006 From: 84yelo3 at gmail.com (=?utf-8?q?Nicol=C3=B2_Chieffo?=) Date: Thu, 06 Apr 2006 08:07:54 -0000 Subject: [Bug 36403] Re: suspend hangs ipw2200 References: <20060324110342.4831.93832.malonedeb@gandwana.ubuntu.com> Message-ID: <20060406080754.32233.4376.malone@gandwana.ubuntu.com> I can add more debug now ieee80211_crypt: unregistered algorithm 'NULL' ieee80211_crypt: registered algorithm 'NULL' ieee80211: 802.11 data/management/control stack, git-1.1.7 ieee80211: Copyright (C) 2004-2005 Intel Corporation ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.1.1 ipw2200: Copyright(c) 2003-2006 Intel Corporation ACPI: PCI Interrupt 0000:02:02.0[A] -> Link [LNKB] -> GSI 4 (level, low) -> IRQ 4 ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection ipw2200: Unable to load ucode: -22 ipw2200: Unable to load firmware: -22 ipw2200: failed to register network device ACPI: PCI interrupt for device 0000:02:02.0 disabled ipw2200: probe of 0000:02:02.0 failed with error -5 -- suspend hangs ipw2200 https://launchpad.net/malone/bugs/36403 From avilella at gmail.com Thu Apr 6 08:17:34 2006 From: avilella at gmail.com (Albert Vilella) Date: Thu, 06 Apr 2006 08:17:34 -0000 Subject: [Bug 35319] Re: no Fn at all Vaio SZ1XP Dapper References: <20060317124552.11105.6446.malonedeb@gandwana.ubuntu.com> Message-ID: <20060406081734.24486.38194.malone@gangotri.ubuntu.com> As I can't awake the laptop from suspend mode, I can only test /dev/input/event4 from a normal boot up, and it isn't giving any prompt when pressing any Fn combination. -- no Fn at all Vaio SZ1XP Dapper https://launchpad.net/malone/bugs/35319 From vetsel.patrice at wanadoo.fr Thu Apr 6 08:28:01 2006 From: vetsel.patrice at wanadoo.fr (VETSEL Patrice) Date: Thu, 06 Apr 2006 08:28:01 -0000 Subject: [Bug 38278] Re: wifi card don't work. isl3886 is required but not installed References: <20060405203926.24486.7083.malonedeb@gangotri.ubuntu.com> Message-ID: <20060406082801.24516.46763.launchpad@gangotri.ubuntu.com> ** Bug 38273 has been marked a duplicate of this bug -- wifi card don't work. isl3886 is required but not installed https://launchpad.net/malone/bugs/38278 From vetsel.patrice at wanadoo.fr Thu Apr 6 08:28:01 2006 From: vetsel.patrice at wanadoo.fr (VETSEL Patrice) Date: Thu, 06 Apr 2006 08:28:01 -0000 Subject: [Bug 38273] Re: new driver islsm don't work with isl3886 wireless card References: <20060405202109.32233.72666.malonedeb@gandwana.ubuntu.com> Message-ID: <20060406082801.24516.62459.launchpad@gangotri.ubuntu.com> *** This bug is a duplicate of bug 38278 *** ** This bug has been marked a duplicate of bug 38278 wifi card don't work. isl3886 is required but not installed -- new driver islsm don't work with isl3886 wireless card https://launchpad.net/malone/bugs/38273 From dennis at kaarsemaker.net Thu Apr 6 08:37:21 2006 From: dennis at kaarsemaker.net (Dennis Kaarsemaker) Date: Thu, 06 Apr 2006 08:37:21 -0000 Subject: [Bug 38342] Re: [Bug 38342] initrd missing References: <20060406074515.32313.67931.malonedeb@gandwana.ubuntu.com> Message-ID: <1144312641.5339.24.camel@mirage> initrd.img is created by the postinstall. What are the error messages you get? -- initrd missing https://launchpad.net/malone/bugs/38342 From 84yelo3 at gmail.com Thu Apr 6 08:38:14 2006 From: 84yelo3 at gmail.com (=?utf-8?q?Nicol=C3=B2_Chieffo?=) Date: Thu, 06 Apr 2006 08:38:14 -0000 Subject: [Bug 37010] Re: ipw2200 doesn't retain sleep status after sleep/hibernate/reboot References: <20060328141614.20484.54456.malonedeb@gangotri.ubuntu.com> Message-ID: <20060406083814.24516.65479.malone@gangotri.ubuntu.com> duplicate removed. When I reported the bug I was not talking about interface status, but wireless card status! (radio status!) ** This bug is no longer a duplicate of bug 37515 Doesn't restore interface state correctly on resume -- ipw2200 doesn't retain sleep status after sleep/hibernate/reboot https://launchpad.net/malone/bugs/37010 From vetsel.patrice at wanadoo.fr Thu Apr 6 08:45:37 2006 From: vetsel.patrice at wanadoo.fr (VETSEL Patrice) Date: Thu, 06 Apr 2006 08:45:37 -0000 Subject: [Bug 38278] Re: wifi card don't work. isl3886 is required but not installed References: <20060405203926.24486.7083.malonedeb@gangotri.ubuntu.com> Message-ID: <20060406084537.32233.51426.malone@gandwana.ubuntu.com> So how can we change order to load prism54 before islsm_pci ?! -- wifi card don't work. isl3886 is required but not installed https://launchpad.net/malone/bugs/38278 From scott at ubuntu.com Thu Apr 6 08:58:25 2006 From: scott at ubuntu.com (Scott James Remnant) Date: Thu, 06 Apr 2006 08:58:25 -0000 Subject: [Bug 38278] Re: wifi card don't work. isl3886 is required but not installed References: <20060405203926.24486.7083.malonedeb@gangotri.ubuntu.com> Message-ID: <20060406085825.24486.24782.malone@gangotri.ubuntu.com> You can't. Instead the modules should be fixed so the load order doesn't matter. -- wifi card don't work. isl3886 is required but not installed https://launchpad.net/malone/bugs/38278 From mika.fischer at gmx.de Thu Apr 6 09:18:32 2006 From: mika.fischer at gmx.de (Mika Fischer) Date: Thu, 06 Apr 2006 09:18:32 -0000 Subject: [Bug 21025] Irda: nsc-ircc needs module options to work correctly References: <20060113141026.21012.47822.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060406091832.24486.93513.launchpad@canonical@gangotri.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Minor Priority: Low Assignee: Scott James Remnant Status: Unconfirmed Description: Hi! This is an IBM ThinkPad R40 2722-CDG. The irda auto-configuration works so far. It loads the right module (nsc-ircc). Unfortunately my Irda port works correctly only if I add the following module options: io=0x2f8 irq=3 dma=3 io and irq can be easily gotten from the corresponding serial port. I don't know where to get the dma port from, though... With these options the device works correctly. If I leave out the any of the three options (io, irq, dma), dmesg gives me: [ 3444.211480] pnp: Device 00:0a disabled. [ 3444.213477] pnp: Device 00:0a activated. [ 3444.264198] irda_init() [ 3444.264233] NET: Registered protocol family 23 [ 3444.275679] nsc-ircc, Found chip at base=0x02e [ 3444.275712] nsc-ircc, driver loaded (Dag Brattli) [ 3444.283080] IrDA: Registered device irda0 [ 3444.283092] nsc-ircc, Using dongle: IBM31T1100 or Temic TFDS6000/TFDS6500 [ 3519.263493] nsc-ircc, unable to allocate dma=0 Let me know if you need more info. Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Minor Priority: Low Assignee: Scott James Remnant Status: Unconfirmed Description: Hi! This is an IBM ThinkPad R40 2722-CDG. The irda auto-configuration works so far. It loads the right module (nsc-ircc). Unfortunately my Irda port works correctly only if I add the following module options: io=0x2f8 irq=3 dma=3 io and irq can be easily gotten from the corresponding serial port. I don't know where to get the dma port from, though... With these options the device works correctly. If I leave out the any of the three options (io, irq, dma), dmesg gives me: [ 3444.211480] pnp: Device 00:0a disabled. [ 3444.213477] pnp: Device 00:0a activated. [ 3444.264198] irda_init() [ 3444.264233] NET: Registered protocol family 23 [ 3444.275679] nsc-ircc, Found chip at base=0x02e [ 3444.275712] nsc-ircc, driver loaded (Dag Brattli) [ 3444.283080] IrDA: Registered device irda0 [ 3444.283092] nsc-ircc, Using dongle: IBM31T1100 or Temic TFDS6000/TFDS6500 [ 3519.263493] nsc-ircc, unable to allocate dma=0 Let me know if you need more info. -- Irda: nsc-ircc needs module options to work correctly https://launchpad.net/malone/bugs/21025 From mjg59 at codon.org.uk Thu Apr 6 09:18:32 2006 From: mjg59 at codon.org.uk (Matthew Garrett) Date: Thu, 06 Apr 2006 09:18:32 -0000 Subject: [Bug 21025] Re: Irda: nsc-ircc needs module options to work correctly References: <20060113141026.21012.47822.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060406091832.24486.13310.malone@gangotri.ubuntu.com> It's a bug in the PnP patches for the driver - it tries to register its ioports twice. ** Changed in: irda-utils (Ubuntu) Sourcepackagename: irda-utils => linux-source-2.6.15 Binarypackagename: irda-utils => None -- Irda: nsc-ircc needs module options to work correctly https://launchpad.net/malone/bugs/21025 From yoop at bballizlife.com Thu Apr 6 09:43:24 2006 From: yoop at bballizlife.com (Loic Mathaud) Date: Thu, 06 Apr 2006 09:43:24 -0000 Subject: [Bug 34752] breezy->dapper wifi lost: signal power to 0 References: <20060313122743.17044.67675.malonedeb@gangotri.ubuntu.com> Message-ID: <20060406094324.24486.51285.launchpad@canonical@gangotri.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Confirmed Description: Under Breezy, the wifi works out of the box. With Dapper, the wifi network is scanned but the pcmcia card can't connect to it because the signal power is at 0. I have a PCMCIA wifi card on my laptop with atmel chipset. Under Breezy, it works out of the box. I just had to plug and play. I dist-upgraded to dapper (kernel 2.6.15-18). Since then, my card is still recognized, it can scan the wifi network available, but it can't connect to it. The Signal power is to zero. I made a test : - using Breezy live CD : works good - using Dapper live CD Flight 5 : can't connect (signal power 0) So here they are infos under breezy : ubuntu at derfel:~$ cat /proc/net/wireless Inter-| sta-| Quality | Discarded packets | Missed | WE face | tus | link level noise | nwid crypt frag retry misc | beacon | 17 eth1: 0004 63. 27. 0. 0 0 0 0 0 1 ubuntu at derfel:~$ iwconfig eth1 eth1 IEEE 802.11-DS ESSID:off/any Mode:Managed Frequency:2.412 GHz Access Point: 00:30:BD:C1:9A:1E Bit Rate:11 Mb/s Retry min limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality=69/100 Signal level=47/100 Noise level=0/0 Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:1 ubuntu at derfel:~$ iwlist eth1 scanning eth1 Scan completed : Cell 01 - Address: 00:30:BD:C1:9A:1E ESSID:"Weazou" Mode:Managed Channel:1 Encryption key:off ubuntu at derfel:~$ dmesg|grep eth1 eth1: MAC address 00:0b:10:00:ca:ee eth1: Atmel at76c50x wireless. Version 0.96 simon at thekelleys.org.uk eth1: 11WAVE WaveBuddy index 0x01: Vcc 3.3, irq 7, io 0x0100-0x011f eth1: no IPv6 routers present ubuntu at derfel:~$ lsmod |grep atmel atmel_cs 9348 1 atmel 32260 1 atmel_cs firmware_class 9728 1 atmel pcmcia 21380 3 atmel_cs pcmcia_core 53568 3 atmel_cs,pcmcia,yenta_socket And now, under Dapper : bballizlife at derfel:~$ cat /proc/net/wireless Inter-| sta-| Quality | Discarded packets | Missed | WE face | tus | link level noise | nwid crypt frag retry misc | beacon | 19 eth1: 0007 0 0 0 0 0 0 0 0 0 bballizlife at derfel:~$ iwconfig eth1 eth1 IEEE 802.11-DS ESSID:"Weazou" Mode:Managed Frequency:2.412 GHz Access Point: 00:30:BD:C1:9A:1E Bit Rate:11 Mb/s Retry min limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality:0 Signal level:0 Noise level:0 Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 bballizlife at derfel:~$ iwlist eth1 scanning eth1 Scan completed : Cell 01 - Address: 00:30:BD:C1:9A:1E ESSID:"Weazou" Mode:Managed Channel:1 Encryption key:off bballizlife at derfel:~$ dmesg [4297861.347000] pccard: card ejected from slot 0 [4297862.579000] pccard: PCMCIA card inserted into slot 0 [4297862.579000] pcmcia: registering new device pcmcia0.0 [4297863.315000] eth1: Atmel at76c50x. Version 0.98. MAC 00:0b:10:00:ca:ee [4297864.656000] ADDRCONF(NETDEV_UP): eth1: link is not ready bballizlife at derfel:~$ lsmod|grep atmel atmel_cs 8964 1 atmel 36740 1 atmel_cs pcmcia 40508 1 atmel_cs Hope this will help. Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Confirmed Description: Under Breezy, the wifi works out of the box. With Dapper, the wifi network is scanned but the pcmcia card can't connect to it because the signal power is at 0. I have a PCMCIA wifi card on my laptop with atmel chipset. Under Breezy, it works out of the box. I just had to plug and play. I dist-upgraded to dapper (kernel 2.6.15-18). Since then, my card is still recognized, it can scan the wifi network available, but it can't connect to it. The Signal power is to zero. I made a test : - using Breezy live CD : works good - using Dapper live CD Flight 5 : can't connect (signal power 0) So here they are infos under breezy : ubuntu at derfel:~$ cat /proc/net/wireless Inter-| sta-| Quality | Discarded packets | Missed | WE face | tus | link level noise | nwid crypt frag retry misc | beacon | 17 eth1: 0004 63. 27. 0. 0 0 0 0 0 1 ubuntu at derfel:~$ iwconfig eth1 eth1 IEEE 802.11-DS ESSID:off/any Mode:Managed Frequency:2.412 GHz Access Point: 00:30:BD:C1:9A:1E Bit Rate:11 Mb/s Retry min limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality=69/100 Signal level=47/100 Noise level=0/0 Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:1 ubuntu at derfel:~$ iwlist eth1 scanning eth1 Scan completed : Cell 01 - Address: 00:30:BD:C1:9A:1E ESSID:"Weazou" Mode:Managed Channel:1 Encryption key:off ubuntu at derfel:~$ dmesg|grep eth1 eth1: MAC address 00:0b:10:00:ca:ee eth1: Atmel at76c50x wireless. Version 0.96 simon at thekelleys.org.uk eth1: 11WAVE WaveBuddy index 0x01: Vcc 3.3, irq 7, io 0x0100-0x011f eth1: no IPv6 routers present ubuntu at derfel:~$ lsmod |grep atmel atmel_cs 9348 1 atmel 32260 1 atmel_cs firmware_class 9728 1 atmel pcmcia 21380 3 atmel_cs pcmcia_core 53568 3 atmel_cs,pcmcia,yenta_socket And now, under Dapper : bballizlife at derfel:~$ cat /proc/net/wireless Inter-| sta-| Quality | Discarded packets | Missed | WE face | tus | link level noise | nwid crypt frag retry misc | beacon | 19 eth1: 0007 0 0 0 0 0 0 0 0 0 bballizlife at derfel:~$ iwconfig eth1 eth1 IEEE 802.11-DS ESSID:"Weazou" Mode:Managed Frequency:2.412 GHz Access Point: 00:30:BD:C1:9A:1E Bit Rate:11 Mb/s Retry min limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality:0 Signal level:0 Noise level:0 Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 bballizlife at derfel:~$ iwlist eth1 scanning eth1 Scan completed : Cell 01 - Address: 00:30:BD:C1:9A:1E ESSID:"Weazou" Mode:Managed Channel:1 Encryption key:off bballizlife at derfel:~$ dmesg [4297861.347000] pccard: card ejected from slot 0 [4297862.579000] pccard: PCMCIA card inserted into slot 0 [4297862.579000] pcmcia: registering new device pcmcia0.0 [4297863.315000] eth1: Atmel at76c50x. Version 0.98. MAC 00:0b:10:00:ca:ee [4297864.656000] ADDRCONF(NETDEV_UP): eth1: link is not ready bballizlife at derfel:~$ lsmod|grep atmel atmel_cs 8964 1 atmel 36740 1 atmel_cs pcmcia 40508 1 atmel_cs Hope this will help. -- breezy->dapper wifi lost: signal power to 0 https://launchpad.net/malone/bugs/34752 From jeremie.corbier at resel.enst-bretagne.fr Thu Apr 6 09:43:24 2006 From: jeremie.corbier at resel.enst-bretagne.fr (=?utf-8?b?SsOpcsOpbWllIENvcmJpZXI=?=) Date: Thu, 06 Apr 2006 09:43:24 -0000 Subject: [Bug 34752] Re: breezy->dapper wifi lost: signal power to 0 References: <20060313122743.17044.67675.malonedeb@gangotri.ubuntu.com> Message-ID: <20060406094324.24486.9966.malone@gangotri.ubuntu.com> Thanks for the bug report. I assign it to linux-source-2.6.15 as the atmel driver is built in the kernel and I set status to Confimed since Michiel experiences the same issue. ** Changed in: Ubuntu Sourcepackagename: None => linux-source-2.6.15 Status: Unconfirmed => Confirmed -- breezy->dapper wifi lost: signal power to 0 https://launchpad.net/malone/bugs/34752 From lyon at pvfree.net Thu Apr 6 09:54:58 2006 From: lyon at pvfree.net (lyon) Date: Thu, 06 Apr 2006 09:54:58 -0000 Subject: [Bug 38342] Re: initrd missing References: <20060406074515.32313.67931.malonedeb@gandwana.ubuntu.com> Message-ID: <20060406095459.24516.48171.malone@gangotri.ubuntu.com> The apt-get install process went into endless silence during Setting up.. part and only what I got was an empty initrd.img file. But! Now I tried to install that package to Dapper under the chroot environment in Debian (i have Deb+Ubu dualboot), and it passed ok. A bit strange, I'll try to reinstall that booted in Ubuntu later. -- initrd missing https://launchpad.net/malone/bugs/38342 From launchpad.net.tormod at xoxy.net Thu Apr 6 10:06:46 2006 From: launchpad.net.tormod at xoxy.net (Tormod Volden) Date: Thu, 06 Apr 2006 10:06:46 -0000 Subject: [Bug 32599] Re: kernel's PHP^Wpnp subsystem is broken References: <20060223124419.14968.52544.malonedeb@gangotri.ubuntu.com> Message-ID: <20060406100646.32233.92699.malone@gandwana.ubuntu.com> After recent updates, notably kernel 2.6.15-20, the "floppy" module is automatically loaded. However "msdos" is not. -- kernel's PHP^Wpnp subsystem is broken https://launchpad.net/malone/bugs/32599 From scott at ubuntu.com Thu Apr 6 10:19:39 2006 From: scott at ubuntu.com (Scott James Remnant) Date: Thu, 06 Apr 2006 10:19:39 -0000 Subject: [Bug 32599] Re: kernel's PHP^Wpnp subsystem is broken References: <20060223124419.14968.52544.malonedeb@gangotri.ubuntu.com> Message-ID: <20060406101939.32313.80944.malone@gandwana.ubuntu.com> msdos will be automatically loaded should you try and mount a filesystem of that type chances are that "vfat" will be loaded instead, of course -- kernel's PHP^Wpnp subsystem is broken https://launchpad.net/malone/bugs/32599 From sfabel at gmx.net Thu Apr 6 10:23:14 2006 From: sfabel at gmx.net (Stephan Fabel) Date: Thu, 06 Apr 2006 10:23:14 -0000 Subject: [Bug 38388] Crashes on mount References: <20060406102314.32233.71871.malonedeb@gandwana.ubuntu.com> Message-ID: <20060406102314.32233.71871.malonedeb@gandwana.ubuntu.com> Public bug reported: Affects: linux-meta linux-k7-smp (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: Running Kubuntu Dapper Flight-6 i386 with newest upgrades installed. System is a AMD64 X2 Dual-Core 4000 MHz. Kernel: Linux gemini 2.6.15-20-k7 #1 SMP PREEMPT Tue Apr 4 19:26:13 UTC 2006 i686 GNU/Linux The XFS Kernel Module crashes when I try to mount an XFS-formatted LVM Volume. dmesg output: 06.04.2006 12:17:12 gemini kernel [4298039.584000] SGI XFS Quota Management subsystem 06.04.2006 12:17:12 gemini kernel [4298039.584000] SGI XFS with ACLs, security attributes, realtime, large block numbers, no debug enabled 06.04.2006 12:17:12 gemini kernel [4298039.587000] XFS mounting filesystem dm-0 06.04.2006 12:17:12 gemini kernel [4298039.668000] Starting XFS recovery on filesystem: dm-0 (logdev: internal) 06.04.2006 12:17:12 gemini kernel [4298039.693000] 00000001 f7501240 ec3bd148 fb9165f6 ec3bd148 00000050 f7e75c00 ec3bd060 06.04.2006 12:17:12 gemini kernel [4298039.693000] [_atomic_dec_and_lock+37/80] _atomic_dec_and_lock+0x25/0x50 06.04.2006 12:17:12 gemini kernel [4298039.693000] c015c4d7 06.04.2006 12:17:12 gemini kernel [4298039.693000] Call Trace: 06.04.2006 12:17:12 gemini kernel [4298039.693000] Code: e0 06 05 00 b9 42 c0 c3 8d b6 00 00 00 00 8d bf 00 00 00 00 83 ec 14 89 5c 24 04 8b 5c 24 18 89 74 24 08 89 7c 24 0c 89 6c 24 10 <8b> 03 c1 e8 1e 8b 14 85 5c dc 39 c0 8b 82 8c 03 00 00 05 00 0c 06.04.2006 12:17:12 gemini kernel [4298039.693000] [copy_mount_options+116/192] copy_mount_options+0x74/0xc0 06.04.2006 12:17:12 gemini kernel [4298039.693000] CPU: 0 06.04.2006 12:17:12 gemini kernel [4298039.693000] [disk_name+213/240] disk_name+0xd5/0xf0 06.04.2006 12:17:12 gemini kernel [4298039.693000] [do_kern_mount+219/400] do_kern_mount+0xdb/0x190 06.04.2006 12:17:12 gemini kernel [4298039.693000] [do_mount+508/544] do_mount+0x1fc/0x220 06.04.2006 12:17:12 gemini kernel [4298039.693000] [do_new_mount+154/224] do_new_mount+0x9a/0xe0 06.04.2006 12:17:12 gemini kernel [4298039.693000] ds: 007b es: 007b ss: 0068 06.04.2006 12:17:12 gemini kernel [4298039.693000] eax: 00000000 ebx: 00000000 ecx: ec3bd060 edx: 00000000 06.04.2006 12:17:12 gemini kernel [4298039.693000] EFLAGS: 00010296 (2.6.15-20-k7) 06.04.2006 12:17:12 gemini kernel [4298039.693000] EIP: 0060:[page_address+23/192] Tainted: P VLI 06.04.2006 12:17:12 gemini kernel [4298039.693000] EIP is at page_address+0x17/0xc0 06.04.2006 12:17:12 gemini kernel [4298039.693000] esi: ebc899c0 edi: ebc899c0 ebp: f75012e0 esp: ec80da6c 06.04.2006 12:17:12 gemini kernel [4298039.693000] fb916892 ec3bd060 00000010 048281a0 00000000 00004000 fb9316c0 ec3bd148 06.04.2006 12:17:12 gemini kernel [4298039.693000] [get_sb_bdev+282/352] get_sb_bdev+0x11a/0x160 06.04.2006 12:17:12 gemini kernel [4298039.693000] Modules linked in: xfs exportfs rfcomm l2cap bluetooth ipv6 powernow_k8 cpufreq_userspace cpufreq_stats freq_table cpufreq_powersave cpufreq_ondemand cpufreq_conservative video tc1100_wmi sony_acpi pcc_acpi hotkey dev_acpi container button acpi_sbs battery ac i2c_acpi_ec af_packet dm_mod md_mod sr_mod sbp2 lp tsdev dvb_usb_vp7045 dvb_usb dvb_core i2c_core serio_raw snd_atiixp dvb_pll parport_pc snd_ac97_codec snd_ac97_bus psmouse parport rtc snd_pcm_oss snd_mixer_oss usb_storage pcspkr snd_pcm snd_timer snd soundcore snd_page_alloc ohci1394 ieee1394 nvidia 8139cp 8139too mii shpchp pci_hotplug ati_agp agpgart sg evdev ext3 jbd ide_generic ehci_hcd ohci_hcd usbcore ide_disk ide_cd cdrom atiixp sd_mod generic sata_sil libata scsi_mod thermal processor fan capability commoncap vesafb fbcon tileblit font bitblit softcursor 06.04.2006 12:17:12 gemini kernel [4298039.693000] Oops: 0000 [#1] 06.04.2006 12:17:12 gemini kernel [4298039.693000] *pde = 00000000 06.04.2006 12:17:12 gemini kernel [4298039.693000] [pg0+994814699/1069192192] xfs_log_mount+0xab/0x170 [xfs] 06.04.2006 12:17:12 gemini kernel [4298039.693000] [pg0+994842102/1069192192] xlog_recover_do_buffer_trans+0x306/0x3a0 [xfs] 06.04.2006 12:17:12 gemini kernel [4298039.693000] [pg0+994842770/1069192192] xlog_recover_do_inode_trans+0x202/0xb30 [xfs] 06.04.2006 12:17:12 gemini kernel [4298039.693000] [pg0+994846500/1069192192] xlog_recover_do_trans+0x114/0x1b0 [xfs] 06.04.2006 12:17:12 gemini kernel [4298039.693000] [pg0+994846875/1069192192] xlog_recover_commit_trans+0x4b/0x70 [xfs] 06.04.2006 12:17:12 gemini kernel [4298039.693000] [pg0+994847165/1069192192] xlog_recover_process_data+0xdd/0x250 [xfs] 06.04.2006 12:17:12 gemini kernel [4298039.693000] [pg0+994851820/1069192192] xlog_do_recovery_pass+0x2cc/0xb10 [xfs] 06.04.2006 12:17:12 gemini kernel [4298039.693000] [pg0+994854079/1069192192] xlog_do_log_recovery+0x8f/0xd0 [xfs] 06.04.2006 12:17:12 gemini kernel [4298039.693000] [pg0+994854203/1069192192] xlog_do_recover+0x3b/0x190 [xfs] 06.04.2006 12:17:12 gemini kernel [4298039.693000] [pg0+994854757/1069192192] xlog_recover+0xd5/0x100 [xfs] 06.04.2006 12:17:12 gemini kernel [4298039.693000] [pg0+994861988/1069192192] xfs_mountfs+0xb54/0xfd0 [xfs] 06.04.2006 12:17:12 gemini kernel [4298039.693000] [pg0+994894287/1069192192] xfs_mount+0x4af/0x500 [xfs] 06.04.2006 12:17:12 gemini kernel [4298039.693000] [pg0+994951092/1069192192] xfs_buf_read_flags+0x34/0xb0 [xfs] 06.04.2006 12:17:12 gemini kernel [4298039.693000] [pg0+994952184/1069192192] pagebuf_rele+0x28/0xc0 [xfs] 06.04.2006 12:17:12 gemini kernel [4298039.693000] [pg0+994952896/1069192192] pagebuf_iostart+0x30/0xa0 [xfs] 06.04.2006 12:17:12 gemini kernel [4298039.693000] [pg0+994954702/1069192192] pagebuf_offset+0x2e/0x40 [xfs] 06.04.2006 12:17:12 gemini kernel [4298039.693000] [pg0+994955664/1069192192] xfs_setsize_buftarg_flags+0x40/0xd0 [xfs] 06.04.2006 12:17:12 gemini kernel [4298039.693000] [pg0+994986112/1069192192] linvfs_fill_super+0x0/0x220 [xfs] 06.04.2006 12:17:12 gemini kernel [4298039.693000] [pg0+994986278/1069192192] linvfs_fill_super+0xa6/0x220 [xfs] 06.04.2006 12:17:12 gemini kernel [4298039.693000] [pg0+994986703/1069192192] linvfs_get_sb+0x2f/0x40 [xfs] 06.04.2006 12:17:12 gemini kernel [4298039.693000] PREEMPT SMP 06.04.2006 12:17:12 gemini kernel [4298039.693000] printing eip: 06.04.2006 12:17:12 gemini kernel [4298039.693000] Process mount (pid: 6572, threadinfo=ec80c000 task=f79a7030) 06.04.2006 12:17:12 gemini kernel [4298039.693000] [sb_set_blocksize+31/80] sb_set_blocksize+0x1f/0x50 06.04.2006 12:17:12 gemini kernel [4298039.693000] [schedule+1329/3360] schedule+0x531/0xd20 06.04.2006 12:17:12 gemini kernel [4298039.693000] [snprintf+43/48] snprintf+0x2b/0x30 06.04.2006 12:17:12 gemini kernel [4298039.693000] Stack: fb930fb4 00000010 ebc899c0 ebc899c0 f75012e0 fb931dce 00000000 ebc90e80 06.04.2006 12:17:12 gemini kernel [4298039.693000] [sysenter_past_esp+84/117] sysenter_past_esp+0x54/0x75 06.04.2006 12:17:12 gemini kernel [4298039.693000] [sys_mount+157/224] sys_mount+0x9d/0xe0 06.04.2006 12:17:12 gemini kernel [4298039.693000] Unable to handle kernel NULL pointer dereference at virtual address 00000000 -- Crashes on mount https://launchpad.net/malone/bugs/38388 From m.escardo at cs.bham.ac.uk Thu Apr 6 10:29:53 2006 From: m.escardo at cs.bham.ac.uk (Martin Escardo) Date: Thu, 06 Apr 2006 10:29:53 -0000 Subject: [Bug 35213] Re: hibernate fails when not on AC power on HP Pavilion ZT3000 - regression from breezy References: <20060316170910.6510.54248.malonedeb@gangotri.ubuntu.com> Message-ID: <20060406102953.24516.26622.malone@gangotri.ubuntu.com> I have the same problem with a Dell D410. All said above holds for this laptop too. -- hibernate fails when not on AC power on HP Pavilion ZT3000 - regression from breezy https://launchpad.net/malone/bugs/35213 From petra at pegu.de Thu Apr 6 10:40:43 2006 From: petra at pegu.de (gelbehexe) Date: Thu, 06 Apr 2006 10:40:43 -0000 Subject: [Bug 38327] Re: nvidia-gx driver seems not to work since 2.6.15-19 References: <20060406061555.24516.98284.malonedeb@gangotri.ubuntu.com> Message-ID: <20060406104043.32313.36150.malone@gandwana.ubuntu.com> Sorry, it seems that is was my fault: During installation linux-image-386 and linux-restricted-modules-386 have been installed. When I found out, I installed current linux-image-XXXX-k7 to correct this and all worked fine - till next kernel-update. I started a new try to update to current kernelversion and now I saw that the restricted modules package for my kernel-version was not installed. So I did this - and now it works! I guess I had to install package linux-image-k7 AND linux-restricted-modules-k7, to get allways the correct packages updated. -- nvidia-gx driver seems not to work since 2.6.15-19 https://launchpad.net/malone/bugs/38327 From punkrockguy318 at comcast.net Thu Apr 6 11:08:15 2006 From: punkrockguy318 at comcast.net (Lukas Sabota) Date: Thu, 06 Apr 2006 11:08:15 -0000 Subject: [Bug 37243] Re: Will not resume from hibernation or sleep References: <20060329230445.7863.72248.malonedeb@gangotri.ubuntu.com> Message-ID: <20060406110815.24486.36858.malone@gangotri.ubuntu.com> Hibernate and sleep still yield the same results with the new -20 kernel upload -- Will not resume from hibernation or sleep https://launchpad.net/malone/bugs/37243 From launchpad.net.tormod at xoxy.net Thu Apr 6 11:21:44 2006 From: launchpad.net.tormod at xoxy.net (Tormod Volden) Date: Thu, 06 Apr 2006 11:21:44 -0000 Subject: [Bug 32599] Re: kernel's PHP^Wpnp subsystem is broken References: <20060223124419.14968.52544.malonedeb@gangotri.ubuntu.com> Message-ID: <20060406112144.32233.12352.malone@gandwana.ubuntu.com> Yes, if I manually do mount -t msdos /dev/fd0 /mnt it works. My point is that double clicking on the floppy icon in gnome won't work, neither would using mount without specifying fs (autodetection). After loading the module, autodetection works. $ sudo mount /dev/fd0 /mnt mount: you must specify the filesystem type $ sudo modprobe msdos $ sudo mount /dev/fd0 /mnt $ -- kernel's PHP^Wpnp subsystem is broken https://launchpad.net/malone/bugs/32599 From martin.pitt at ubuntu.com Thu Apr 6 11:36:59 2006 From: martin.pitt at ubuntu.com (Martin Pitt) Date: Thu, 06 Apr 2006 11:36:59 -0000 Subject: [Bug 37112] Re: iBook G4, on resume from sleep, enables touch-to-click despite my preferences References: <20060329032925.6253.87634.malonedeb@gandwana.ubuntu.com> Message-ID: <20060406113659.32233.53185.malone@gandwana.ubuntu.com> Closing kernel task, pbbuttonsd is the right package. ** Changed in: linux-meta linux-image-2.6-powerpc (Ubuntu) Status: Unconfirmed => Rejected -- iBook G4, on resume from sleep, enables touch-to-click despite my preferences https://launchpad.net/malone/bugs/37112 From scott at ubuntu.com Thu Apr 6 11:37:17 2006 From: scott at ubuntu.com (Scott James Remnant) Date: Thu, 06 Apr 2006 11:37:17 -0000 Subject: [Bug 32599] Re: kernel's PHP^Wpnp subsystem is broken References: <20060223124419.14968.52544.malonedeb@gangotri.ubuntu.com> Message-ID: <20060406113717.24486.92687.malone@gangotri.ubuntu.com> This is a known bug, and there are ways to fix it; HAL has recently gained support for knowing the type of a filesystem before it's mounted so the right arguments can be passed to mount. -- kernel's PHP^Wpnp subsystem is broken https://launchpad.net/malone/bugs/32599 From martin.pitt at ubuntu.com Thu Apr 6 11:39:43 2006 From: martin.pitt at ubuntu.com (Martin Pitt) Date: Thu, 06 Apr 2006 11:39:43 -0000 Subject: [Bug 37112] Re: iBook G4, on resume from sleep, enables touch-to-click despite my preferences References: <20060329032925.6253.87634.malonedeb@gandwana.ubuntu.com> Message-ID: <20060406113943.24516.38816.malone@gangotri.ubuntu.com> confirmed here as well. -- iBook G4, on resume from sleep, enables touch-to-click despite my preferences https://launchpad.net/malone/bugs/37112 From lists at whitehouse.org.nz Thu Apr 6 11:41:13 2006 From: lists at whitehouse.org.nz (Luna-Tick) Date: Thu, 06 Apr 2006 11:41:13 -0000 Subject: [Bug 36664] Re: Installer should configure /etc/hdparm.conf References: <20060326015154.6279.34415.malonedeb@gandwana.ubuntu.com> Message-ID: <20060406114113.24516.13057.launchpad@gangotri.ubuntu.com> ** Changed in: linux-source-2.6.15 (Ubuntu) Severity: Normal => Wishlist Status: Unconfirmed => Confirmed -- Installer should configure /etc/hdparm.conf https://launchpad.net/malone/bugs/36664 From dennis at kaarsemaker.net Thu Apr 6 12:22:15 2006 From: dennis at kaarsemaker.net (Dennis Kaarsemaker) Date: Thu, 06 Apr 2006 12:22:15 -0000 Subject: [Bug 24270] Re: Screen flickering References: <20060113142814.21012.74045.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060406122215.32313.57982.malone@gandwana.ubuntu.com> Relax... the kernel team is subscribed to the bug so it will be noticed. -- Screen flickering https://launchpad.net/malone/bugs/24270 From francesco.it at gmail.com Thu Apr 6 12:54:15 2006 From: francesco.it at gmail.com (Francesco Frassinelli) Date: Thu, 06 Apr 2006 12:54:15 -0000 Subject: [Bug 35215] Re: ipw3945 driver required for functionality on new Intel PRO/Wireless 3945ABG Mini-PCI Express Adapters References: <20060316173707.11105.89035.malonedeb@gandwana.ubuntu.com> Message-ID: <20060406125415.24486.46478.malone@gangotri.ubuntu.com> It's very important. I too would like inclusion of the driver into the next kernel. I'm seeing a lot of Centrino Duo processors. I've bought an Asus A6JC-Q008H and it use it too. -- ipw3945 driver required for functionality on new Intel PRO/Wireless 3945ABG Mini-PCI Express Adapters https://launchpad.net/malone/bugs/35215 From r.steiger at quick.cz Thu Apr 6 13:02:24 2006 From: r.steiger at quick.cz (lyon) Date: Thu, 06 Apr 2006 13:02:24 -0000 Subject: [Bug 38342] Re: initrd missing References: <20060406074515.32313.67931.malonedeb@gandwana.ubuntu.com> Message-ID: <20060406130224.24516.74577.malone@gangotri.ubuntu.com> Back in the Ubuntu, back with the error :( 'ps a' output: 7945 R+ 0:00 apt-get install linux-image-2.6.15-20-386 7971 S+ 0:00 /usr/bin/dpkg --status-fd 17 --configure linux-image-2.6.15-20-386 7972 S+ 0:00 /usr/bin/perl /var/lib/dpkg/info/linux-image-2.6.15-20-386.postinst configure 2.6.15-20.30 7974 S+ 0:00 /bin/sh /usr/sbin/update-initramfs -u -k 2.6.15-20-386 7975 S+ 0:00 /bin/sh /usr/sbin/mkinitramfs -o /boot/initrd.img-2.6.15-20-386 2.6.15-20-386 9321 S+ 0:00 /bin/sh /usr/share/initramfs-tools/hooks/evms 9364 S+ 0:00 /bin/sh /usr/share/initramfs-tools/hooks/evms 9365 Zl+ 0:00 [evms_query] 9366 S+ 0:00 grep EVMS Version 9367 S+ 0:00 awk { print $3; } If i break the process bz hitting ctrl+c, i get this output (dpkg -i ends the same way): Setting up linux-image-2.6.15-20-386 (2.6.15-20.30) ... Failed to create initrd image. dpkg: error processing linux-image-2.6.15-20-386 (--configure): subprocess post-installation script returned error exit status 2 Errors were encountered while processing: linux-image-2.6.15-20-386 E: Sub-process /usr/bin/dpkg returned an error code (1) -- initrd missing https://launchpad.net/malone/bugs/38342 From Ben.Stanley at exemail.com.au Thu Apr 6 13:05:44 2006 From: Ben.Stanley at exemail.com.au (Ben Stanley) Date: Thu, 06 Apr 2006 13:05:44 -0000 Subject: [Bug 34508] Re: 2.6.15 kernel fails to boot on ppc machine References: <20060311210305.30082.75520.malonedeb@gandwana.ubuntu.com> Message-ID: <20060406130544.32313.4063.malone@gandwana.ubuntu.com> My problem could be related to bug #38287, although that one is on i386! -- 2.6.15 kernel fails to boot on ppc machine https://launchpad.net/malone/bugs/34508 From r.steiger at quick.cz Thu Apr 6 13:38:38 2006 From: r.steiger at quick.cz (lyon) Date: Thu, 06 Apr 2006 13:38:38 -0000 Subject: [Bug 38342] Re: initrd missing References: <20060406074515.32313.67931.malonedeb@gandwana.ubuntu.com> Message-ID: <20060406133838.32313.37799.malone@gandwana.ubuntu.com> Oops, sorry for filling this page but I have been investigating a bit and found out that this is not the image-related problem. The post-install process fails on every linux-image i'm trying to install, beside this I got a kernel oops in dmesg, so this could explain the ability to complete the image installation from different system in chroot (Debian, in my case). Maybe a bug in linux-image-2.6.15-19-386 a have booted on now, so I'll try to put on a different image and will post the result. -- initrd missing https://launchpad.net/malone/bugs/38342 From j.quigley at serviomatic.com Thu Apr 6 13:35:28 2006 From: j.quigley at serviomatic.com (Jason Quigley) Date: Thu, 06 Apr 2006 13:35:28 -0000 Subject: [Bug 9238] Re: 'mh2' driver is missing, affects Logitech Dinovo Media Desktop Bluetooth References: <20060113130851.21012.14767.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060406133528.24516.19479.malone@gangotri.ubuntu.com> The patch is at http://www.holtmann.org/linux/kernel/patch-2.6.15-mh2.gz This patch can't be in dapper, or if it is, it doesn't work. I tried this with kernel 2.6.15-19-k7 and my volume keys don't work. I reboot into my custom kernel and everything works perfectly. -- 'mh2' driver is missing, affects Logitech Dinovo Media Desktop Bluetooth https://launchpad.net/malone/bugs/9238 From r.steiger at quick.cz Thu Apr 6 13:50:01 2006 From: r.steiger at quick.cz (lyon) Date: Thu, 06 Apr 2006 13:50:01 -0000 Subject: [Bug 38342] Re: initrd missing References: <20060406074515.32313.67931.malonedeb@gandwana.ubuntu.com> Message-ID: <20060406135001.32313.91096.malone@gandwana.ubuntu.com> Great, it's all working with different image loaded, so there is no need to worry, until you put the 2.6.15-19 image version in the final release. I'm happy to finding out the solution, this bug report could be removed anyway. -- initrd missing https://launchpad.net/malone/bugs/38342 From matthias at web-junkies.de Thu Apr 6 13:46:32 2006 From: matthias at web-junkies.de (Matthias Klein) Date: Thu, 06 Apr 2006 13:46:32 -0000 Subject: [Bug 38238] Re: prism54 no longer works References: <20060405180221.24486.72499.malonedeb@gangotri.ubuntu.com> Message-ID: <20060406134632.24516.47790.malone@gangotri.ubuntu.com> The same here. My Netgear WG511 does not work with linux-source-2.6.15_2.6.15-20.30. Now i have reinstalled Dapper Flight 6 and everything works fine. -- prism54 no longer works https://launchpad.net/malone/bugs/38238 From matthias at web-junkies.de Thu Apr 6 13:47:14 2006 From: matthias at web-junkies.de (Matthias Klein) Date: Thu, 06 Apr 2006 13:47:14 -0000 Subject: [Bug 38304] Re: Prism 2.5 firmware load failed References: <20060406002946.32233.83854.malonedeb@gandwana.ubuntu.com> Message-ID: <20060406134714.24486.23201.malone@gangotri.ubuntu.com> The same here. My Netgear WG511 does not work with linux-source-2.6.15_2.6.15-20.30. Now i have reinstalled Dapper Flight 6 and everything works fine. -- Prism 2.5 firmware load failed https://launchpad.net/malone/bugs/38304 From dave at solutionsfirst.com.au Thu Apr 6 14:23:18 2006 From: dave at solutionsfirst.com.au (davekempe) Date: Thu, 06 Apr 2006 14:23:18 -0000 Subject: [Bug 38421] no aic94xx support in dapper kernel References: <20060406142318.24516.55253.malonedeb@gangotri.ubuntu.com> Message-ID: <20060406142318.24516.55253.malonedeb@gangotri.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: Hi, I know this is probably a big ask, but I think it would be a great idea if we could figure out a way to pull in the aic94xx SAS driver into the dapper kernel. This is a SAS chipset present on base-model IBM 1RU servers like the x306m, and is going to be more and more prevalent in the next 12months, not to mention 5 years. There is a kernel.org git tree here: http://www.kernel.org/git/?p=linux/kernel/git/jejb/aic94xx-sas-2.6.git;a=summary I know Dapper seems to support the SAS drivers that the Sun servers use - the mptsas driver I believe. Flight 5 started working fine on my 4200s and 4100s. I would love Dapper main to work with these IBMS - the only other alternative is redhat :( We have tried unsuccessfully to pull the git tree into the dapper kernel and apply the patch cleanly. Perhaps your kernel gurus might have better luck or advice for how to get Dapper onto one of these boxes. More information about the driver is here: http://linux.adaptec.com/sas/index.html There appears to be some binary drivers for Redhat and Suse here: http://www-1.ibm.com/support/docview.wss?rs=0&q1=x306m&uid=psg1MIGR-61878&loc=en_US&cs=utf-8&cc=us&lang=en (these are pre-built binarys for the distro installers to support the boxes at install time). Obviously, we need to install on these machines so the dapper kernel will need to be SAS-sata enabled. I realise the hardware is kinda crap - but unfortunately, this is the base model IBM. Lots of em are going to sell :/ -- no aic94xx support in dapper kernel https://launchpad.net/malone/bugs/38421 From 84yelo3 at gmail.com Thu Apr 6 14:25:23 2006 From: 84yelo3 at gmail.com (=?utf-8?q?Nicol=C3=B2_Chieffo?=) Date: Thu, 06 Apr 2006 14:25:23 -0000 Subject: [Bug 38423] suspend-resume-hibernate-resume fails something related to temperature References: <20060406142523.32233.80007.malonedeb@gandwana.ubuntu.com> Message-ID: <20060406142523.32233.80007.malonedeb@gandwana.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: after a cycle of sleep+resume and hibernate+resume the system decides to shut down because af temperature of 255°C which is a bit impossible... I'll try to have a list of modules after the two resumes to see if some modules are not loaded. -- suspend-resume-hibernate-resume fails something related to temperature https://launchpad.net/malone/bugs/38423 From ben.collins at ubuntu.com Thu Apr 6 14:43:05 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Thu, 06 Apr 2006 14:43:05 -0000 Subject: [Bug 24270] Re: Screen flickering References: <20060113142814.21012.74045.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060406144305.24516.17638.malone@gangotri.ubuntu.com> Does it flicker in X aswell? ** Changed in: linux-source-2.6.15 (Ubuntu) Assignee: (unassigned) => Ben Collins -- Screen flickering https://launchpad.net/malone/bugs/24270 From ben.collins at ubuntu.com Thu Apr 6 14:44:54 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Thu, 06 Apr 2006 14:44:54 -0000 Subject: [Bug 27416] Re: built-in 4in1 card reader doesn't work References: <20060113145424.21012.36434.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060406144454.24486.10232.malone@gangotri.ubuntu.com> That's correct, and it probably wont. Dapper, however, should support it fine. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Unconfirmed => Fix Released -- built-in 4in1 card reader doesn't work https://launchpad.net/malone/bugs/27416 From ben.collins at ubuntu.com Thu Apr 6 14:49:30 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Thu, 06 Apr 2006 14:49:30 -0000 Subject: [Bug 27421] Re: Logitech RX300 mouse extra-buttons without kernel events References: <20060113145426.21012.68118.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060406144930.32233.70670.malone@gandwana.ubuntu.com> Is it that it's not sending these events any longer, or that it never sent them? If the events exist, and are standard HID stuff, then the event layer should be processing them. If they are some special protocol, like something that needs a driver under Windows, then there's probably not much to support. I'm going to attach two test programs to the bug report to help identify the problem. -- Logitech RX300 mouse extra-buttons without kernel events https://launchpad.net/malone/bugs/27421 From 84yelo3 at gmail.com Thu Apr 6 14:59:31 2006 From: 84yelo3 at gmail.com (=?utf-8?q?Nicol=C3=B2_Chieffo?=) Date: Thu, 06 Apr 2006 14:59:31 -0000 Subject: [Bug 38423] Re: suspend-resume-hibernate-resume fails something related to temperature References: <20060406142523.32233.80007.malonedeb@gandwana.ubuntu.com> Message-ID: <20060406145931.24516.86164.malone@gangotri.ubuntu.com> modules loaded are the same before and after the resume which causes the critical temperature shutdown. I will attach the syslog ** Attachment added: "critical temperature reached syslog file" http://librarian.launchpad.net/1961610/criticaltemperature -- suspend-resume-hibernate-resume fails something related to temperature https://launchpad.net/malone/bugs/38423 From ben.collins at ubuntu.com Thu Apr 6 15:02:25 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Thu, 06 Apr 2006 15:02:25 -0000 Subject: [Bug 27422] Re: USB Wi-Fi AirVast not detected References: <20060113145426.21012.92636.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060406150226.32233.91924.malone@gandwana.ubuntu.com> It has changed _a lot_. Please retest, not just with flight 6, but also make sure you upgrade to the latest -20 kernel. -- USB Wi-Fi AirVast not detected https://launchpad.net/malone/bugs/27422 From ben.collins at ubuntu.com Thu Apr 6 15:00:18 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Thu, 06 Apr 2006 15:00:18 -0000 Subject: [Bug 27421] Re: Logitech RX300 mouse extra-buttons without kernel events References: <20060113145426.21012.68118.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060406150018.24486.36984.launchpad@gangotri.ubuntu.com> ** Attachment added: "Event Test" http://librarian.launchpad.net/1961611/evtest.c -- Logitech RX300 mouse extra-buttons without kernel events https://launchpad.net/malone/bugs/27421 From 84yelo3 at gmail.com Thu Apr 6 15:03:06 2006 From: 84yelo3 at gmail.com (=?utf-8?q?Nicol=C3=B2_Chieffo?=) Date: Thu, 06 Apr 2006 15:03:06 -0000 Subject: [Bug 24270] Re: [Bug 24270] Re: Screen flickering References: <20060113142814.21012.74045.launchpad@macquarie.warthogs.hbd.com> <20060406144305.24516.17638.malone@gangotri.ubuntu.com> Message-ID: <641322f90604060803x3432bbdeofd1d8b7d979f12aa@mail.gmail.com> yes, also X flickers sometimes ctrl alt f1 (flickering too), alt f7 (restores normal graphic) -- Screen flickering https://launchpad.net/malone/bugs/24270 From qgil at desdeamericaconamor.org Thu Apr 6 15:07:58 2006 From: qgil at desdeamericaconamor.org (Quim Gil) Date: Thu, 06 Apr 2006 15:07:58 -0000 Subject: [Bug 35991] Re: dapper: Regression with sound support between kernel 2.6.15-18 and -19 References: <20060322113416.30442.75959.malonedeb@gangotri.ubuntu.com> Message-ID: <20060406150758.32233.21225.malone@gandwana.ubuntu.com> Confirmed. It works with 2.6.15-20 Thank you! -- dapper: Regression with sound support between kernel 2.6.15-18 and -19 https://launchpad.net/malone/bugs/35991 From ben.collins at ubuntu.com Thu Apr 6 15:12:57 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Thu, 06 Apr 2006 15:12:57 -0000 Subject: [Bug 27454] Re: Hibernation problem with SCSI controller References: <20060113145435.21012.82266.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060406151257.32233.89008.malone@gandwana.ubuntu.com> This may just be one of those drivers that needs to be unloaded/reloaded for suspend/resume cycles. Edit /etc/default/acpi-support, and add aic7xxx to the MODULES variable there. See if that resolves this for you. -- Hibernation problem with SCSI controller https://launchpad.net/malone/bugs/27454 From ben.collins at ubuntu.com Thu Apr 6 15:16:36 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Thu, 06 Apr 2006 15:16:36 -0000 Subject: [Bug 27551] Re: cpu frequency is wrong References: <20060113151808.29386.65945.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060406151636.24516.92993.malone@gangotri.ubuntu.com> This isn't really a bug I think. My cpuinfo on my amd64 shows 1100Mhz while cpu freq scaling is enabled. When I bump the load (like running while true; do true; done), It shows the corrected cpu freq at full throttle, of 2200Mhz. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Unconfirmed => Rejected -- cpu frequency is wrong https://launchpad.net/malone/bugs/27551 From gioppo at gmail.com Thu Apr 6 15:27:47 2006 From: gioppo at gmail.com (Gabriele Postorino) Date: Thu, 06 Apr 2006 15:27:47 -0000 Subject: [Bug 27551] Re: cpu frequency is wrong References: <20060113151808.29386.65945.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060406152747.32313.61809.malone@gandwana.ubuntu.com> Things changed with new kernel build. Now cpuinfo shows real values. Thanks -- cpu frequency is wrong https://launchpad.net/malone/bugs/27551 From ben.collins at ubuntu.com Thu Apr 6 15:33:12 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Thu, 06 Apr 2006 15:33:12 -0000 Subject: [Bug 28406] Re: Acer 1362LC suspend to ram doesn't wake up References: <20060113152219.29386.83071.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060406153312.24516.31453.malone@gangotri.ubuntu.com> You've shown this to be a breezy bug report. Please test against dapper aswell. ** Changed in: linux-source-2.6.15 (Ubuntu) Sourcepackagename: linux-source-2.6.15 => linux-source-2.6.12 -- Acer 1362LC suspend to ram doesn't wake up https://launchpad.net/malone/bugs/28406 From ben.collins at ubuntu.com Thu Apr 6 15:32:00 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Thu, 06 Apr 2006 15:32:00 -0000 Subject: [Bug 28375] Re: oops after CD/DVD drive I/O errors References: <20060113152210.29386.55638.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060406153200.24516.5168.malone@gangotri.ubuntu.com> This is against breezy. Please test against dapper aswell. ** Changed in: linux-source-2.6.15 (Ubuntu) Sourcepackagename: linux-source-2.6.15 => linux-source-2.6.12 -- oops after CD/DVD drive I/O errors https://launchpad.net/malone/bugs/28375 From leon.cordingley at lineone.net Thu Apr 6 15:37:58 2006 From: leon.cordingley at lineone.net (aces21) Date: Thu, 06 Apr 2006 15:37:58 -0000 Subject: [Bug 35301] ueagle-atm howto References: <20060317103454.6537.10258.malonedeb@gangotri.ubuntu.com> Message-ID: <20060406153758.24516.79119.malone@gangotri.ubuntu.com> you could take a look at my howto here: http://www.ubuntuforums.org/showthread.php?t=144468&highlight=ueagle apparently your mileage may vary. I am not sure if these modems could be made to work out of the box due to firmware, but if ueagle-atm and a working usbatm module were in the dapper kernel (they should be in stock linux kernel from 2.6-16 anyway) it would be a lot easier. -- ueagle-atm driver does not work https://launchpad.net/malone/bugs/35301 From ben.collins at ubuntu.com Thu Apr 6 15:39:52 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Thu, 06 Apr 2006 15:39:52 -0000 Subject: [Bug 28543] Re: USB and PCI cards don't work on a recent motherboard References: <20060114143255.6048.44490.malonedeb@gangotri.ubuntu.com> Message-ID: <20060406153952.32233.23265.malone@gandwana.ubuntu.com> It should, I'll have to recheck to make sure I added the correct information. -- USB and PCI cards don't work on a recent motherboard https://launchpad.net/malone/bugs/28543 From nk at iname.com Thu Apr 6 15:38:31 2006 From: nk at iname.com (Norbert Kiesel) Date: Thu, 06 Apr 2006 15:38:31 -0000 Subject: [Bug 35814] Re: [Bug 35814] Re: bcm43xx MAX syspend failed References: <20060321031914.8118.81768.malonedeb@gandwana.ubuntu.com> <20060405221325.24516.80750.malone@gangotri.ubuntu.com> Message-ID: <1144337911.32336.22.camel@titan.tbdnetworks.com> On Wed, 2006-04-05 at 22:13 +0000, kmon wrote: > Hi > > Can you please try 2.6.15-20 kernel? This has solved many issues with bcm43xx driver. I now get kernel panics on "modprobe bcm43xx" (not every time but 4 out of 5 attempts). I scribbled the hopefully relevant part off the screen: Pid: 12722, comm: udevd Not tainted 2.6.15-20-amd64-k8 #1 RIP: 0010:[] {:bcm43xx:bcm43xx_dma_handle_xmitstatus+201 ... Process udevd (pid: 12722, threadinfo ffff810012070000, task ffff8100280d7200) Stack: 0000000000000000 0000000100000000 0000000000000000 ffff8100042d4cc8 ffffffff803d8ed8 0000000000000000 0000000000000000 ffffffff884a094b ffff8100042d4d74 0000000000000202 Call Trace: {:bcm43xx:bcm43xx_interrupt_tasklet+1659} {process_timeout+0} {tasklet_action+102} {__do_softirq+100} {call_softirq+31} {do_softirq+44} {irq_exit+72} {do_IRQ+52} {ret_from_intr+0} code: 8b 92 80 00 00 00 41 83 e4 01 48 83 c7 70 e8 b4 33 c7 f7 48 RIP: {:bcm43xx:bcm43xx_dma_handle_xmitstatus+201} RSP CR2: 0000000000000080 <0> Kernel panic - not syncing: Aiee, killing interrupt handler! -- bcm43xx MAX syspend failed https://launchpad.net/malone/bugs/35814 From km_eriksen at yahoo.dk Thu Apr 6 15:54:10 2006 From: km_eriksen at yahoo.dk (kme) Date: Thu, 06 Apr 2006 15:54:10 -0000 Subject: [Bug 37004] Wireless USB keyboard/mouse not working References: <20060328133936.20484.26593.malonedeb@gangotri.ubuntu.com> Message-ID: <20060406155410.24516.5465.launchpad@canonical@gangotri.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Needs Info Description: (Not necessarily a xorg problem - just a guess) A combined keyboard/mouse, wireless with USB interface doesn't work at all with Dapper Flight 5. The keyboard/mouse is a Ruwida (http://www.ruwido.com/en/platform_hip.htm). The keyboard works during POST - e.g. I can go into the BIOS and change values normally. However, as soon a Dapper Drake boots neigher the keyboard, nor the mouse works at all. If I boot the same pc on a Knoppix 3.8 CD the keyboard/mouse is fine. If I take the keyboard/mouse to my other pc running both Windows 2000 and Breezy Badger it works correctly in both OS'es. Hardware: MSI K8NGM2 motherboard (nVidia 6150/430 chip set), SATA hard disk, IDE DVD-RW. Useful (?) outputs: kme at mmc:~$ lsusb Bus 002 Device 002: ID 119b:0400 ruwido austria GmbH Infrared Keyboard V2.01 Bus 002 Device 001: ID 0000:0000 Bus 001 Device 001: ID 0000:0000 kme at mmc:~$ grep ruwido /var/log/dmesg [4294674.449000] input: ruwido austria GmbH ruwido austria GmbH USB Infrared Keyboard V2.01 as /class/input/input0 [4294674.449000] input: USB HID v1.10 Keyboard [ruwido austria GmbH ruwido austria GmbH USB Infrared Keyboard V2.01] on usb-0000:00:0b.0-2 [4294674.464000] input: ruwido austria GmbH ruwido austria GmbH USB Infrared Keyboard V2.01 as /class/input/input1 [4294674.464000] input: USB HID v1.10 Mouse [ruwido austria GmbH ruwido austria GmbH USB Infrared Keyboard V2.01] on usb-0000:00:0b.0-2 kme at mmc:~$ cat /proc/version Linux version 2.6.15-19-k7 (buildd at rothera) (gcc version 4.0.3 (Ubuntu 4.0.3-1ubuntu3)) #1 SMP PREEMPT Mon Mar 20 18:21:44 UTC 2006 Up-to-date by apt-get update && apt-get upgrade as of March 28th 2006. Thx. Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Needs Info Description: (Not necessarily a xorg problem - just a guess) A combined keyboard/mouse, wireless with USB interface doesn't work at all with Dapper Flight 5. The keyboard/mouse is a Ruwida (http://www.ruwido.com/en/platform_hip.htm). The keyboard works during POST - e.g. I can go into the BIOS and change values normally. However, as soon a Dapper Drake boots neigher the keyboard, nor the mouse works at all. If I boot the same pc on a Knoppix 3.8 CD the keyboard/mouse is fine. If I take the keyboard/mouse to my other pc running both Windows 2000 and Breezy Badger it works correctly in both OS'es. Hardware: MSI K8NGM2 motherboard (nVidia 6150/430 chip set), SATA hard disk, IDE DVD-RW. Useful (?) outputs: kme at mmc:~$ lsusb Bus 002 Device 002: ID 119b:0400 ruwido austria GmbH Infrared Keyboard V2.01 Bus 002 Device 001: ID 0000:0000 Bus 001 Device 001: ID 0000:0000 kme at mmc:~$ grep ruwido /var/log/dmesg [4294674.449000] input: ruwido austria GmbH ruwido austria GmbH USB Infrared Keyboard V2.01 as /class/input/input0 [4294674.449000] input: USB HID v1.10 Keyboard [ruwido austria GmbH ruwido austria GmbH USB Infrared Keyboard V2.01] on usb-0000:00:0b.0-2 [4294674.464000] input: ruwido austria GmbH ruwido austria GmbH USB Infrared Keyboard V2.01 as /class/input/input1 [4294674.464000] input: USB HID v1.10 Mouse [ruwido austria GmbH ruwido austria GmbH USB Infrared Keyboard V2.01] on usb-0000:00:0b.0-2 kme at mmc:~$ cat /proc/version Linux version 2.6.15-19-k7 (buildd at rothera) (gcc version 4.0.3 (Ubuntu 4.0.3-1ubuntu3)) #1 SMP PREEMPT Mon Mar 20 18:21:44 UTC 2006 Up-to-date by apt-get update && apt-get upgrade as of March 28th 2006. Thx. -- Wireless USB keyboard/mouse not working https://launchpad.net/malone/bugs/37004 From christoph.rauch at gmail.com Thu Apr 6 15:50:41 2006 From: christoph.rauch at gmail.com (luckystarr) Date: Thu, 06 Apr 2006 15:50:41 -0000 Subject: [Bug 38443] Kernel panic upon finished syncing software-raid device References: <20060406155041.32313.13847.malonedeb@gandwana.ubuntu.com> Message-ID: <20060406155041.32313.13847.malonedeb@gandwana.ubuntu.com> Public bug reported: Affects: linux-source-2.6.12 (Ubuntu) Severity: Major Priority: (none set) Status: Unconfirmed Description: Setup is: 2 Maxtor 6Y120L0 harddrives both connected as master to its own channel on a Promise PDC20267. I created a type "fd" partitions on both disks and created a raid1 device of them. Two SATA drives also running as software-raid1 are running fine. In the very moment the sync is finished I get this: [] __do_IRQ+0xa3/0xb1 [] do_IRQ+0x19/0x24 [] common_interrupt+0x1a/0x20 [] __make_request [] generic_make_request [] autoremove_wake_function [] autoremove_wake_function [] __do_IRQ [] __do_IRQ [] sync_request_write [] __generic_unplug_device [] unplug_slaves [raid1] [] raid1d [raid1] [] md_thread [md] [] autoremove_wake_function [] ret_from_fork [] autoremove_wake_function [] md_thread [md] [] kernel_thread_helper Code: <0>Kernel panic - not syncing: Fatal exception in interrupt I didn't write down all the data... if you need it I'll add it here. The error is reproducible. -- Kernel panic upon finished syncing software-raid device https://launchpad.net/malone/bugs/38443 From nk at iname.com Thu Apr 6 15:50:13 2006 From: nk at iname.com (Norbert Kiesel) Date: Thu, 06 Apr 2006 15:50:13 -0000 Subject: [Bug 38193] Re: kernel panic with "modprobe bcm43xx" References: <20060405134807.25515.93618.malonedeb@gangotri.ubuntu.com> Message-ID: <20060406155013.32233.44412.malone@gandwana.ubuntu.com> Here is a hand-copied part of the crash. it does not crash all the time (something like 75%). I can crash it again if something is missing. Pid: 12722, comm: udevd Not tainted 2.6.15-20-amd64-k8 #1 RIP: 0010:[] {:bcm43xx:bcm43xx_dma_handle_xmitstatus+201 ... Process udevd (pid: 12722, threadinfo ffff810012070000, task ffff8100280d7200) Stack: 0000000000000000 0000000100000000 0000000000000000 ffff8100042d4cc8 ffffffff803d8ed8 0000000000000000 0000000000000000 ffffffff884a094b ffff8100042d4d74 0000000000000202 Call Trace: {:bcm43xx:bcm43xx_interrupt_tasklet+1659} {process_timeout+0} {tasklet_action+102} {__do_softirq+100} {call_softirq+31} {do_softirq+44} {irq_exit+72} {do_IRQ+52} {ret_from_intr+0} code: 8b 92 80 00 00 00 41 83 e4 01 48 83 c7 70 e8 b4 33 c7 f7 48 RIP: {:bcm43xx:bcm43xx_dma_handle_xmitstatus+201} RSP CR2: 0000000000000080 <0> Kernel panic - not syncing: Aiee, killing interrupt handler! -- kernel panic with "modprobe bcm43xx" https://launchpad.net/malone/bugs/38193 From jgotangco at ubuntu.com Thu Apr 6 15:54:10 2006 From: jgotangco at ubuntu.com (Jerome S. Gotangco) Date: Thu, 06 Apr 2006 15:54:10 -0000 Subject: [Bug 37004] Re: Wireless USB keyboard/mouse not working References: <20060328133936.20484.26593.malonedeb@gangotri.ubuntu.com> Message-ID: <20060406155410.24516.98720.malone@gangotri.ubuntu.com> ok moving this to linux-source. Hi Ben, this doesn't seem to be an xorg issue at all, would this be kernel-related? ** Changed in: xorg (Ubuntu) Sourcepackagename: xorg => linux-source-2.6.15 -- Wireless USB keyboard/mouse not working https://launchpad.net/malone/bugs/37004 From christoph.rauch at gmail.com Thu Apr 6 15:57:45 2006 From: christoph.rauch at gmail.com (luckystarr) Date: Thu, 06 Apr 2006 15:57:45 -0000 Subject: [Bug 38443] Re: Kernel panic upon finished syncing software-raid device References: <20060406155041.32313.13847.malonedeb@gandwana.ubuntu.com> Message-ID: <20060406155746.24516.91371.launchpad@gangotri.ubuntu.com> ** Changed in: linux-source-2.6.12 (Ubuntu) Severity: Normal => Major -- Kernel panic upon finished syncing software-raid device https://launchpad.net/malone/bugs/38443 From vincent.trouilliez at modulonet.fr Thu Apr 6 16:04:59 2006 From: vincent.trouilliez at modulonet.fr (Trouilliez vincent) Date: Thu, 06 Apr 2006 16:04:59 -0000 Subject: [Bug 27454] Re: Hibernation problem with SCSI controller References: <20060113145435.21012.82266.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060406160459.32313.11484.malone@gandwana.ubuntu.com> Thanks Ben ! It seems to have fixed the problem ! I did 3 hibernate/resume cycles in a row, to test it, and it never failed :o) Bug closed :-) -- Hibernation problem with SCSI controller https://launchpad.net/malone/bugs/27454 From etienner at student.ethz.ch Thu Apr 6 16:23:21 2006 From: etienner at student.ethz.ch (etienner) Date: Thu, 06 Apr 2006 16:23:21 -0000 Subject: [Bug 38447] Acer TravelMate stucks my typing Fn+F5 References: <20060406162321.32233.99792.malonedeb@gandwana.ubuntu.com> Message-ID: <20060406162321.32233.99792.malonedeb@gandwana.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: When I type Fn+F5 (CRT/LCD) on my laptop, it stuks, the only thing that can be done is to press for 5 sec the power button. Therefore I recomend to save everything before trying it! I use Kubuntu breezy 5.10, my laptop is an Acer TravelMate 290 ** Summary changed: - Acer TravelMate stucks my typing Fn+F5 + Acer TravelMate stucks by typing Fn+F5 -- Acer TravelMate stucks by typing Fn+F5 https://launchpad.net/malone/bugs/38447 From elanthis at awesomeplay.com Thu Apr 6 16:37:21 2006 From: elanthis at awesomeplay.com (Sean Middleditch) Date: Thu, 06 Apr 2006 16:37:21 -0000 Subject: [Bug 34645] Re: static in sound output with alc880 References: <20060312204837.30057.4099.malonedeb@gandwana.ubuntu.com> Message-ID: <20060406163721.32233.84512.malone@gandwana.ubuntu.com> I can't get 2.6.15-20-k7 to boot (kernel panic unloading the ramdisk), but the sound is crystal clear under 2.6.15-19-k7. -- static in sound output with alc880 https://launchpad.net/malone/bugs/34645 From dennis at kaarsemaker.net Thu Apr 6 16:37:47 2006 From: dennis at kaarsemaker.net (Dennis Kaarsemaker) Date: Thu, 06 Apr 2006 16:37:47 -0000 Subject: [Bug 33161] Re: PnPACPI errors on boot and no /dev/fd0 References: <20060228154107.17498.36793.malonedeb@gangotri.ubuntu.com> Message-ID: <20060406163748.32313.85604.malone@gandwana.ubuntu.com> This has been fixed in -20, please reopen if further issues occur with the latest kernel pakages. ** Changed in: linux-source-2.6.15 linux-image-2.6.15-16-386 (Ubuntu) Binarypackagename: linux-image-2.6.15-16-386 => None Status: Confirmed => Fix Released -- PnPACPI errors on boot and no /dev/fd0 https://launchpad.net/malone/bugs/33161 From ben.collins at ubuntu.com Thu Apr 6 16:36:35 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Thu, 06 Apr 2006 16:36:35 -0000 Subject: [Bug 28749] Re: when Airport Extreme should work, the system won't boot References: <20060117103833.25106.73289.malonedeb@gangotri.ubuntu.com> Message-ID: <20060406163635.32313.22978.malone@gandwana.ubuntu.com> Pretty certain this is fixed. My 1.6ghz G4 PowerBook has been working fine. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Needs Info => Fix Released -- when Airport Extreme should work, the system won't boot https://launchpad.net/malone/bugs/28749 From crimsun at fungus.sh.nu Thu Apr 6 16:48:37 2006 From: crimsun at fungus.sh.nu (Daniel T. Chen) Date: Thu, 06 Apr 2006 16:48:37 -0000 Subject: [Bug 34645] Re: static in sound output with alc880 References: <20060312204837.30057.4099.malonedeb@gandwana.ubuntu.com> Message-ID: <20060406164837.24516.73329.malone@gangotri.ubuntu.com> Ok, please file a separate bug regarding initrd (same source package, linux-source-2.6.15). I'm closing this bug per your reports, thanks. ** Changed in: linux-source-2.6.15 linux-image-2.6.15-18-k7 (Ubuntu) Status: Needs Info => Fix Released -- static in sound output with alc880 https://launchpad.net/malone/bugs/34645 From ben.collins at ubuntu.com Thu Apr 6 16:49:35 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Thu, 06 Apr 2006 16:49:35 -0000 Subject: [Bug 29460] Re: Boot Crash with SMP K8 Kernel References: <20060123165300.28395.60982.malonedeb@gangotri.ubuntu.com> Message-ID: <20060406164935.32313.11471.malone@gandwana.ubuntu.com> This is definitely breezy, not dapper. I am fairly certain this bug is fixed in dapper. ** Changed in: linux-source-2.6.15 (Ubuntu) Sourcepackagename: linux-source-2.6.15 => linux-source-2.6.12 -- Boot Crash with SMP K8 Kernel https://launchpad.net/malone/bugs/29460 From ben.collins at ubuntu.com Thu Apr 6 16:57:19 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Thu, 06 Apr 2006 16:57:19 -0000 Subject: [Bug 29695] Re: after sleep+resume I can't restart the system References: <20060125205542.26274.38074.malonedeb@gangotri.ubuntu.com> Message-ID: <20060406165719.32313.58799.malone@gandwana.ubuntu.com> Try booting with the reboot=h command line option, and see if that resolves things. If it does, please attach the output of "sudo dmidecode > dmi.txt". ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Unconfirmed => Needs Info -- after sleep+resume I can't restart the system https://launchpad.net/malone/bugs/29695 From ben.collins at ubuntu.com Thu Apr 6 16:55:44 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Thu, 06 Apr 2006 16:55:44 -0000 Subject: [Bug 2962] Re: Register of Power Status Change Requires Removal & Reinsertion of Battery References: <20051008140639.14682.11809.malonedeb@gangotri.ubuntu.com> Message-ID: <20060406165544.24516.99812.malone@gangotri.ubuntu.com> This could be indicative of an ACPI bug in your bios. Check with Sony to see if there is an updated BIOS. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Needs Info => Unconfirmed -- Register of Power Status Change Requires Removal & Reinsertion of Battery https://launchpad.net/malone/bugs/2962 From mdz at ubuntu.com Thu Apr 6 17:00:51 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Thu, 06 Apr 2006 17:00:51 -0000 Subject: [Bug 34817] Re: Bttv radio tuner just gives noise References: <20060313214024.30082.68440.malonedeb@gandwana.ubuntu.com> Message-ID: <20060406170051.24486.49035.launchpad@gangotri.ubuntu.com> ** Changed in: linux-source-2.6.15 linux-image-2.6.15-17-powerpc (Ubuntu) Assignee: (unassigned) => Ben Collins -- Bttv radio tuner just gives noise https://launchpad.net/malone/bugs/34817 From mdz at ubuntu.com Thu Apr 6 17:06:30 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Thu, 06 Apr 2006 17:06:30 -0000 Subject: [Bug 34781] Re: [Dapper] boot fails on HP Pavilion dv5000 References: <20060313160554.17044.88668.malonedeb@gangotri.ubuntu.com> Message-ID: <20060406170630.32233.86048.launchpad@gandwana.ubuntu.com> ** Changed in: linux-meta linux-amd64-generic (Ubuntu) Sourcepackagename: linux-meta => linux-source-2.6.15 Binarypackagename: linux-amd64-generic => None Assignee: (unassigned) => Ben Collins -- [Dapper] boot fails on HP Pavilion dv5000 https://launchpad.net/malone/bugs/34781 From ben.collins at ubuntu.com Thu Apr 6 17:11:25 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Thu, 06 Apr 2006 17:11:25 -0000 Subject: [Bug 29789] Re: tv card audio not working References: <20060126170552.26274.32755.malonedeb@gangotri.ubuntu.com> Message-ID: <20060406171125.24516.5363.malone@gangotri.ubuntu.com> I have a question though, does bttv still work under these conditions? The problem I have is that the bttv driver doesn't seem to bind to the Video Capture device, it only binds to the Audio Capture pci device (or rather, it only matches, and becomes autoloaded when it sees a Bt878 or Bt879 Audio Capture device). So I can't just disable this in the bttv driver, else it just plain breaks it. -- tv card audio not working https://launchpad.net/malone/bugs/29789 From mdz at ubuntu.com Thu Apr 6 17:18:46 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Thu, 06 Apr 2006 17:18:46 -0000 Subject: [Bug 34958] Re: IRQ 11 disabled, no network, desktop / kernel freeze (Averatec laptop) - regression from Breezy References: <20060314220405.17018.47701.malonedeb@gangotri.ubuntu.com> Message-ID: <20060406171846.32233.50289.malone@gandwana.ubuntu.com> Please supply the requested information ** Changed in: linux-source-2.6.15 linux-image-2.6.15-18-386 (Ubuntu) Status: Unconfirmed => Needs Info -- IRQ 11 disabled, no network, desktop / kernel freeze (Averatec laptop) - regression from Breezy https://launchpad.net/malone/bugs/34958 From mdz at ubuntu.com Thu Apr 6 17:15:05 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Thu, 06 Apr 2006 17:15:05 -0000 Subject: [Bug 34919] Re: update-initramfs doesn't check for free disk space References: <20060314162143.30082.81761.malonedeb@gandwana.ubuntu.com> Message-ID: <20060406171505.32233.48554.launchpad@gandwana.ubuntu.com> *** This bug is a duplicate of bug 31126 *** ** This bug has been marked a duplicate of bug 31126 Doesn't check for failure due to full filesystem -- update-initramfs doesn't check for free disk space https://launchpad.net/malone/bugs/34919 From mdz at ubuntu.com Thu Apr 6 17:14:55 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Thu, 06 Apr 2006 17:14:55 -0000 Subject: [Bug 31126] Re: Doesn't check for failure due to full filesystem References: <20060211062813.25235.10693.malonedeb@gangotri.ubuntu.com> Message-ID: <20060406171455.32233.6948.launchpad@gandwana.ubuntu.com> ** Summary changed: - Kernel panic after installation of linux-386 [Dapper] + Doesn't check for failure due to full filesystem ** Bug 34919 has been marked a duplicate of this bug -- Doesn't check for failure due to full filesystem https://launchpad.net/malone/bugs/31126 From zupop at email.it Thu Apr 6 17:27:43 2006 From: zupop at email.it (Zupop) Date: Thu, 06 Apr 2006 17:27:43 -0000 Subject: [Bug 35057] Cannot read LCD status References: <20060315144109.11105.73961.malonedeb@gandwana.ubuntu.com> Message-ID: <20060406172743.24516.5868.launchpad@canonical@gangotri.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Needs Info Description: Working on Kubuntu 6.04 Flight 5 sometimes I obtain reset messages from my LCD screen ("Display changed : LCD on"). I can work, but it's not normal. Error occurs on Flight 4 and 5 of Kubuntu. On flight 4 error was more frequent. It doesn't occurs on Ubuntu 5.10. LCD is clearly bad managed. If I try with dmesg I obtain two error messages every 0.1 sec, just like this : [4295069.987000] Asus ACPI: Error reading LCD status [4295069.987000] Asus ACPI: Error reading LCD status [4295070.087000] Asus ACPI: Error reading LCD status [4295070.087000] Asus ACPI: Error reading LCD status Hence, I think it's someting regarding ACPI, but it could also be something regarding SVGA (Nvidia GeForce Go 6200) or X server. I run Kubuntu on a ASUS A6BOOK laptop. Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Needs Info Description: Working on Kubuntu 6.04 Flight 5 sometimes I obtain reset messages from my LCD screen ("Display changed : LCD on"). I can work, but it's not normal. Error occurs on Flight 4 and 5 of Kubuntu. On flight 4 error was more frequent. It doesn't occurs on Ubuntu 5.10. LCD is clearly bad managed. If I try with dmesg I obtain two error messages every 0.1 sec, just like this : [4295069.987000] Asus ACPI: Error reading LCD status [4295069.987000] Asus ACPI: Error reading LCD status [4295070.087000] Asus ACPI: Error reading LCD status [4295070.087000] Asus ACPI: Error reading LCD status Hence, I think it's someting regarding ACPI, but it could also be something regarding SVGA (Nvidia GeForce Go 6200) or X server. I run Kubuntu on a ASUS A6BOOK laptop. -- Cannot read LCD status https://launchpad.net/malone/bugs/35057 From mdz at ubuntu.com Thu Apr 6 17:23:37 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Thu, 06 Apr 2006 17:23:37 -0000 Subject: [Bug 34976] Re: Orinoco gold wireless card isn't detected correctly/installed References: <20060315014818.30082.24042.malonedeb@gandwana.ubuntu.com> Message-ID: <20060406172338.24516.42479.launchpad@gangotri.ubuntu.com> ** Changed in: linux-source-2.6.15 kernel-image-2.6.15-18-386-di (Ubuntu) Binarypackagename: kernel-image-2.6.15-18-386-di => None Assignee: (unassigned) => Ben Collins Status: Unconfirmed => Confirmed -- Orinoco gold wireless card isn't detected correctly/installed https://launchpad.net/malone/bugs/34976 From mdz at ubuntu.com Thu Apr 6 17:27:42 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Thu, 06 Apr 2006 17:27:42 -0000 Subject: [Bug 35057] Re: Cannot read LCD status References: <20060315144109.11105.73961.malonedeb@gandwana.ubuntu.com> Message-ID: <20060406172742.24516.77631.malone@gangotri.ubuntu.com> Please attach "sudo dmidecode" output ** Changed in: acpi (Ubuntu) Sourcepackagename: acpi => linux-source-2.6.15 Binarypackagename: acpi => None Status: Unconfirmed => Needs Info -- Cannot read LCD status https://launchpad.net/malone/bugs/35057 From mdz at ubuntu.com Thu Apr 6 17:28:13 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Thu, 06 Apr 2006 17:28:13 -0000 Subject: [Bug 35056] Re: Package description should also name "Turion" References: <20060315142801.6510.90091.malonedeb@gangotri.ubuntu.com> Message-ID: <20060406172813.32233.57071.launchpad@gandwana.ubuntu.com> ** Changed in: linux-meta linux-image-amd64-k8 (Ubuntu) Severity: Normal => Minor Assignee: (unassigned) => Ben Collins Status: Unconfirmed => Confirmed -- Package description should also name "Turion" https://launchpad.net/malone/bugs/35056 From mdz at ubuntu.com Thu Apr 6 17:29:13 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Thu, 06 Apr 2006 17:29:13 -0000 Subject: [Bug 35054] Re: Cannot mount FAT partitions References: <20060315140318.6537.81237.malonedeb@gangotri.ubuntu.com> Message-ID: <20060406172913.24516.63011.malone@gangotri.ubuntu.com> Do you see this problem with any filesystem small enough that you could send us a copy to test? ** Changed in: linux-source-2.6.15 (Ubuntu) Assignee: (unassigned) => Ben Collins Status: Unconfirmed => Needs Info -- Cannot mount FAT partitions https://launchpad.net/malone/bugs/35054 From mdz at ubuntu.com Thu Apr 6 17:37:08 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Thu, 06 Apr 2006 17:37:08 -0000 Subject: [Bug 35044] Re: speedstep-smi doesn't load anymore on thinkpad t20 References: <20060315125056.30057.65261.malonedeb@gandwana.ubuntu.com> Message-ID: <20060406173708.24516.84648.launchpad@gangotri.ubuntu.com> ** Changed in: linux-source-2.6.15 (Ubuntu) Assignee: (unassigned) => Ben Collins -- speedstep-smi doesn't load anymore on thinkpad t20 https://launchpad.net/malone/bugs/35044 From mdz at ubuntu.com Thu Apr 6 17:39:41 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Thu, 06 Apr 2006 17:39:41 -0000 Subject: [Bug 34998] Re: Wireless card doesn't work (airo module) References: <20060315065622.30057.57904.malonedeb@gandwana.ubuntu.com> Message-ID: <20060406173941.24516.92224.malone@gangotri.ubuntu.com> (in the future, please include lengthy output as an attachment rather than as a comment; it makes the bug difficult to read) ** Changed in: linux-source-2.6.15 kernel-image-2.6.15-18-386-di (Ubuntu) Assignee: (unassigned) => Ben Collins -- Wireless card doesn't work (airo module) https://launchpad.net/malone/bugs/34998 From mdz at ubuntu.com Thu Apr 6 17:41:01 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Thu, 06 Apr 2006 17:41:01 -0000 Subject: [Bug 34998] Re: Wireless card doesn't work (airo module) References: <20060315065622.30057.57904.malonedeb@gandwana.ubuntu.com> Message-ID: <20060406174101.32313.74412.malone@gandwana.ubuntu.com> Rejecting spurious bug task; bug remains open ** Changed in: kernel-image-2.6.15-18-386-di (Ubuntu) Status: Unconfirmed => Rejected -- Wireless card doesn't work (airo module) https://launchpad.net/malone/bugs/34998 From mdz at ubuntu.com Thu Apr 6 17:47:41 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Thu, 06 Apr 2006 17:47:41 -0000 Subject: [Bug 35067] Re: powerbook freezes on wakeup (bcm43xx problem) References: <20060315162509.11079.58921.malonedeb@gandwana.ubuntu.com> Message-ID: <20060406174741.32233.54595.launchpad@gandwana.ubuntu.com> ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Unconfirmed => Confirmed -- powerbook freezes on wakeup (bcm43xx problem) https://launchpad.net/malone/bugs/35067 From tschaeck at web.de Thu Apr 6 18:08:39 2006 From: tschaeck at web.de (Jakob Kohl) Date: Thu, 06 Apr 2006 18:08:39 -0000 Subject: [Bug 35057] Re: Cannot read LCD status References: <20060315144109.11105.73961.malonedeb@gandwana.ubuntu.com> Message-ID: <20060406180840.24486.705.launchpad@gangotri.ubuntu.com> ** Attachment added: "dmidecode output" http://librarian.launchpad.net/1964311/dmidecode.txt -- Cannot read LCD status https://launchpad.net/malone/bugs/35057 From david at allouche.net Thu Apr 6 18:22:15 2006 From: david at allouche.net (David Allouche) Date: Thu, 06 Apr 2006 18:22:15 -0000 Subject: [Bug 38461] unstable ordering of eth devices References: <20060406182215.24516.22276.malonedeb@gangotri.ubuntu.com> Message-ID: <20060406182215.24516.22276.malonedeb@gangotri.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 linux-image-2.6.15-20-686 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: On my ThinkPad T42p, the ipw2200 and e1000 devices are not always associated to the same device names. Observed behaviour: On Dapper, the most frequent configuration is ipw2200 on eth1 and e1000 on eth2. But sometimes (for no apparent reason) they are reversed after bootup and e1000 is eth1 and ipw2200 is eth2. When that happens, I do "rmmod e1000; rmmod ipw2200; modprobe ipw2200; modprobe e1000" to associate ipw2200 to eth1 and e1000 to eth2, allowing my network configuration to work correctly. Expected behaviour: On Brezzy (and previous releases), e1000 was always eth0, and ipw2200 was always eth1. -- unstable ordering of eth devices https://launchpad.net/malone/bugs/38461 From 84yelo3 at gmail.com Thu Apr 6 18:29:02 2006 From: 84yelo3 at gmail.com (=?utf-8?q?Nicol=C3=B2_Chieffo?=) Date: Thu, 06 Apr 2006 18:29:02 -0000 Subject: [Bug 29695] Re: [Bug 29695] Re: after sleep+resume I can't restart the system References: <20060125205542.26274.38074.malonedeb@gangotri.ubuntu.com> <20060406165719.32313.58799.malone@gandwana.ubuntu.com> Message-ID: <641322f90604061129h5b88ae92ka2141ff31a641bfc@mail.gmail.com> no, it doesn't solve the problem -- after sleep+resume I can't restart the system https://launchpad.net/malone/bugs/29695 From pascal at tipisoft.dk Thu Apr 6 18:44:08 2006 From: pascal at tipisoft.dk (Pascal) Date: Thu, 06 Apr 2006 18:44:08 -0000 Subject: [Bug 35125] Dap. F5: lvm forces reboot References: <20060315222928.11079.99268.malonedeb@gandwana.ubuntu.com> Message-ID: <20060406184408.32313.69513.launchpad@canonical@gandwana.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Major Priority: (none set) Assignee: Ben Collins Status: Needs Info Description: I just installed kubuntu dapper F5 on my external Maxtor Onetouch harddisk. But when I wanted to reboot into my system, first it stopped while saying "Setting up lvm vol group" and rebooted after showing some information about my harddrive(/dev/sda) The next time, and ever since, it has been doing the same thing, except now it has just been after "Starting enterprise volume managent" It worked fine on Flight 4 and the only difference I made was the first time I unplugged my /dev/hda while installing on /dev/sda Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Major Priority: (none set) Assignee: Ben Collins Status: Needs Info Description: I just installed kubuntu dapper F5 on my external Maxtor Onetouch harddisk. But when I wanted to reboot into my system, first it stopped while saying "Setting up lvm vol group" and rebooted after showing some information about my harddrive(/dev/sda) The next time, and ever since, it has been doing the same thing, except now it has just been after "Starting enterprise volume managent" It worked fine on Flight 4 and the only difference I made was the first time I unplugged my /dev/hda while installing on /dev/sda -- Dap. F5: lvm forces reboot https://launchpad.net/malone/bugs/35125 From andrew.conkling at gmail.com Thu Apr 6 18:35:54 2006 From: andrew.conkling at gmail.com (Andrew Conkling) Date: Thu, 06 Apr 2006 18:35:54 -0000 Subject: [Bug 38464] Power management stopped working on Dell Inspiron 6000 References: <20060406183554.24516.21959.malonedeb@gangotri.ubuntu.com> Message-ID: <20060406183554.24516.21959.malonedeb@gangotri.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 linux-image-2.6.15-20-686 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: When I upgraded to 2.6.15-20, my power management stopped working on my Dell Inspiron 6000. - When I close my lid, the screen does not blank. (This is what I have set in g-p-m settings). - System | Lock Screen does not work. - The screensaver does not activate after the session is idle (as set in the Screensaver preferences). -- Power management stopped working on Dell Inspiron 6000 https://launchpad.net/malone/bugs/38464 From mdz at ubuntu.com Thu Apr 6 18:42:59 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Thu, 06 Apr 2006 18:42:59 -0000 Subject: [Bug 35134] Re: Resume (from RAM) fails References: <20060315230705.11105.24738.malonedeb@gandwana.ubuntu.com> Message-ID: <20060406184300.32313.24576.malone@gandwana.ubuntu.com> Are you able to reproduce the problem anymore? ** Changed in: linux-meta linux-image-2.6-686 (Ubuntu) Sourcepackagename: linux-meta => linux-source-2.6.15 Binarypackagename: linux-image-2.6-686 => None Assignee: (unassigned) => Ben Collins ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Unconfirmed => Needs Info -- Resume (from RAM) fails https://launchpad.net/malone/bugs/35134 From mdz at ubuntu.com Thu Apr 6 18:44:08 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Thu, 06 Apr 2006 18:44:08 -0000 Subject: [Bug 35125] Re: Dap. F5: lvm forces reboot References: <20060315222928.11079.99268.malonedeb@gandwana.ubuntu.com> Message-ID: <20060406184408.32313.46966.malone@gandwana.ubuntu.com> Please attach full dmesg output showing all of your disks ** Changed in: debian-installer (Ubuntu) Sourcepackagename: debian-installer => linux-source-2.6.15 Assignee: (unassigned) => Ben Collins Status: Unconfirmed => Needs Info ** Summary changed: - Dap. F5: lvm forces reboot + Spurious reboot during hard disk device access -- Spurious reboot during hard disk device access https://launchpad.net/malone/bugs/35125 From s.pb at laposte.net Thu Apr 6 19:07:52 2006 From: s.pb at laposte.net (PB) Date: Thu, 06 Apr 2006 19:07:52 -0000 Subject: [Bug 35292] network manager freezes !! References: <20060317090412.6510.42733.malonedeb@gangotri.ubuntu.com> Message-ID: <20060406190752.24516.58288.launchpad@canonical@gangotri.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Assignee: Ben Collins Status: Needs Info Description: according to someone who comments my last bug report, I re-write here my pb : when I want to setup my both ethernet and wifi connections in the network manager, my computer (AVERATEC 3250 HX) freezes ! ! I dont really understand because I was on a Ubuntu Breezy before and there was NO pb with wifi which has been recognized immediatly by breezy and NO pb with ethernet connection ! Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Assignee: Ben Collins Status: Needs Info Description: according to someone who comments my last bug report, I re-write here my pb : when I want to setup my both ethernet and wifi connections in the network manager, my computer (AVERATEC 3250 HX) freezes ! ! I dont really understand because I was on a Ubuntu Breezy before and there was NO pb with wifi which has been recognized immediatly by breezy and NO pb with ethernet connection ! -- network manager freezes !! https://launchpad.net/malone/bugs/35292 From gioppo at gmail.com Thu Apr 6 19:09:16 2006 From: gioppo at gmail.com (Gabriele Postorino) Date: Thu, 06 Apr 2006 19:09:16 -0000 Subject: [Bug 33714] ndiswrapper-utils1.8 doesn't work References: <20060304162930.17525.6725.malonedeb@gangotri.ubuntu.com> Message-ID: <20060406190916.24486.35725.launchpad@canonical@gangotri.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Assignee: Ben Collins Status: Unconfirmed Description: ndiswrapper-utils-1.8-ubuntu2 and latest kernel package is not working with my realtek 8180 card; well it works with open wireless network, but it breaks with wep or wpa encryption. ndiswrapper-1.5 is working good with 2.6.15-8-386 kernel. Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Assignee: Ben Collins Status: Unconfirmed Description: ndiswrapper-utils-1.8-ubuntu2 and latest kernel package is not working with my realtek 8180 card; well it works with open wireless network, but it breaks with wep or wpa encryption. ndiswrapper-1.5 is working good with 2.6.15-8-386 kernel. -- ndiswrapper-utils1.8 doesn't work https://launchpad.net/malone/bugs/33714 From dennis at kaarsemaker.net Thu Apr 6 18:59:09 2006 From: dennis at kaarsemaker.net (Dennis Kaarsemaker) Date: Thu, 06 Apr 2006 18:59:09 -0000 Subject: [Bug 33401] Re: [Bug 33401] Re: SD Card Reader stopped working References: <20060302130216.22140.36667.malonedeb@gandwana.ubuntu.com> <20060405210341.32233.60224.malone@gandwana.ubuntu.com> Message-ID: <1144349949.32193.7.camel@mirage> *** This bug is a duplicate of bug 37391 *** status FixReleased ** Changed in: linux-source-2.6.15 linux-image-2.6.15-16-686 (Ubuntu) Status: Needs Info => Fix Released -- SD Card Reader stopped working https://launchpad.net/malone/bugs/33401 From samuellb at bredband.net Thu Apr 6 19:00:34 2006 From: samuellb at bredband.net (=?utf-8?q?Samuel_Lid=C3=A9n_Borell?=) Date: Thu, 06 Apr 2006 19:00:34 -0000 Subject: [Bug 34781] Re: [Dapper] boot fails on HP Pavilion dv5000 References: <20060313160554.17044.88668.malonedeb@gangotri.ubuntu.com> Message-ID: <20060406190034.32313.71763.malone@gandwana.ubuntu.com> After updating Dapper today it boots without the "noapic" option (it still needs acpi=off), but then the integrated NIC doesn't work. With both command line options it works. -- [Dapper] boot fails on HP Pavilion dv5000 https://launchpad.net/malone/bugs/34781 From mdz at ubuntu.com Thu Apr 6 19:07:52 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Thu, 06 Apr 2006 19:07:52 -0000 Subject: [Bug 35292] Re: network manager freezes !! References: <20060317090412.6510.42733.malonedeb@gangotri.ubuntu.com> Message-ID: <20060406190752.24516.45818.malone@gangotri.ubuntu.com> Please get a backtrace from the crash by following https://wiki.ubuntu.com/DebuggingSystemCrash ** Changed in: network-manager (Ubuntu) Sourcepackagename: network-manager => linux-source-2.6.15 Assignee: (unassigned) => Ben Collins Status: Unconfirmed => Needs Info -- network manager freezes !! https://launchpad.net/malone/bugs/35292 From cbinusa at gmail.com Thu Apr 6 19:07:02 2006 From: cbinusa at gmail.com (cbinusa) Date: Thu, 06 Apr 2006 19:07:02 -0000 Subject: [Bug 38473] DWL-g650 not configurable References: <20060406190702.24516.69199.malonedeb@gangotri.ubuntu.com> Message-ID: <20060406190702.24516.69199.malonedeb@gangotri.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: My DWL-g650 wireless card worked fine in Ubuntu 5.1. In Dapper flight 6, it does not show up as a configurable network device even though the system recognizes it as a device. So,I cannot configure it. -- DWL-g650 not configurable https://launchpad.net/malone/bugs/38473 From dennis at kaarsemaker.net Thu Apr 6 19:09:16 2006 From: dennis at kaarsemaker.net (Dennis Kaarsemaker) Date: Thu, 06 Apr 2006 19:09:16 -0000 Subject: [Bug 33714] Re: ndiswrapper-utils1.8 doesn't work References: <20060304162930.17525.6725.malonedeb@gangotri.ubuntu.com> Message-ID: <20060406190916.24486.93528.launchpad@gangotri.ubuntu.com> ** Changed in: ndiswrapper ndiswrapper-utils (Ubuntu) Sourcepackagename: ndiswrapper => linux-source-2.6.15 Binarypackagename: ndiswrapper-utils => None ** Summary changed: - ndiswrapper-utils1.8 doesn't work + r818x not working ** Description changed: - ndiswrapper-utils-1.8-ubuntu2 and latest kernel package is not working - with my realtek 8180 card; well it works with open wireless network, but - it breaks with wep or wpa encryption. ndiswrapper-1.5 is working good - with 2.6.15-8-386 kernel. + r818x does not support this realtek 8180 card, ndiswrapper does. Maybe + it should be blacklisted? -- r818x not working https://launchpad.net/malone/bugs/33714 From edal at freestart.hu Thu Apr 6 19:23:52 2006 From: edal at freestart.hu (edal) Date: Thu, 06 Apr 2006 19:23:52 -0000 Subject: [Bug 2962] Re: Register of Power Status Change Requires Removal & Reinsertion of Battery References: <20051008140639.14682.11809.malonedeb@gangotri.ubuntu.com> Message-ID: <20060406192352.32313.89218.malone@gandwana.ubuntu.com> Maybe, but I have been researching this and I have some more data. If I type acpi -V I get temperature and power status information correctly displayed on the terminal screen, WITHOUT having to remove the battery. I assume the acpi command gets its data from a BIOS call. Ed Almos -- Register of Power Status Change Requires Removal & Reinsertion of Battery https://launchpad.net/malone/bugs/2962 From edal at freestart.hu Thu Apr 6 19:29:38 2006 From: edal at freestart.hu (edal) Date: Thu, 06 Apr 2006 19:29:38 -0000 Subject: [Bug 2962] Output From acpi -V References: <20051008140639.14682.11809.malonedeb@gangotri.ubuntu.com> Message-ID: <20060406192938.32313.40523.malone@gandwana.ubuntu.com> edal at athena:~$ acpi -V Battery 1: charging, 100%, until charged Thermal 1: ok, 51.0 degrees C AC Adapter 1: on-line edal at athena:~$ acpi -V <----------------------AC UNPLUGGED HERE Battery 1: discharging, 99%, 02:32:21 remaining Thermal 1: ok, 51.0 degrees C AC Adapter 1: off-line edal at athena:~$ acpi -V <------------------------AC RESTORED HERE Battery 1: charging, 98%, 00:03:41 until charged Thermal 1: ok, 50.0 degrees C AC Adapter 1: on-line edal at athena:~$ Throughout this the icon for the battery monitor app remained unchanged. Ed Almos -- Register of Power Status Change Requires Removal & Reinsertion of Battery https://launchpad.net/malone/bugs/2962 From launchpad.net at spam.ennes.net Thu Apr 6 19:34:12 2006 From: launchpad.net at spam.ennes.net (Skion) Date: Thu, 06 Apr 2006 19:34:12 -0000 Subject: [Bug 38478] rt2500 seems of no use in SMP kernel package References: <20060406193412.32313.93906.malonedeb@gandwana.ubuntu.com> Message-ID: <20060406193412.32313.93906.malonedeb@gandwana.ubuntu.com> Public bug reported: Affects: linux-meta linux-image-2.6-686 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: Since SMP is the default in Dapper, the module rt2500 seems to be of no use, as it doesn't work with SMP. With the recent kernels (2.6.15) the following happens when the PCMCIA card is inserted: --- (dmesg) [4302852.755000] pccard: CardBus card inserted into slot 1 [4302854.188000] PCI: Enabling device 0000:06:00.0 (0000 -> 0002) [4302854.188000] ACPI: PCI Interrupt 0000:06:00.0[A] -> Link [PILB] -> GSI 11 (level, low) -> IRQ 11 [4302854.188000] rt2500 1.1.0 BETA3 2005/07/31 http://rt2x00.serialmonkey.com [4302854.188000] PCI: Setting latency timer of device 0000:06:00.0 to 64 [4302854.198000] ra0 (WE) : Driver using old /proc/net/wireless support, please fix driver ! [4302856.257000] ------------[ cut here ]------------ [4302856.257000] kernel BUG at kernel/timer.c:211! [4302856.257000] invalid operand: 0000 [#1] [4302856.257000] PREEMPT SMP [4302856.257000] Modules linked in: rt2500 binfmt_misc tun speedstep_smi speedstep_lib cpufreq_userspace cpufreq_stats freq_table cpufreq_powersave cpufreq_ondemand cpufreq_conservative video tc1100_wmi sony_acpi pcc_acpi hotkey dev_acpi container button acpi_sbs battery ac i2c_acpi_ec md_mod dm_mod ipv6 lp af_packet snd_es1938 gameport snd_pcm_oss snd_mixer_oss snd_pcm snd_page_alloc snd_opl3_lib snd_timer snd_hwdep snd_mpu401_uart snd_rawmidi snd_seq_device joydev tsdev pcmcia e100 mii snd psmouse rtc serio_raw yenta_socket rsrc_nonstatic i2c_piix4 pcmcia_core i2c_core parport_pc parport floppy shpchp pci_hotplug pcspkr intel_agp agpgart soundcore evdev ext3 jbd ide_generic uhci_hcd usbcore ide_cd cdrom ide_disk piix generic thermal processor fan capability commoncap vga16fb vgastate fbcon tileblit font bitblit softcursor [4302856.257000] CPU: 0 [4302856.257000] EIP: 0060:[] Not tainted VLI [4302856.257000] EFLAGS: 00210246 (2.6.15-20-686) [4302856.257000] EIP is at __mod_timer+0xa3/0xc0 [4302856.257000] eax: 00786042 ebx: c0b059e4 ecx: 00000000 edx: 00000000 [4302856.257000] esi: c0b059e4 edi: c0b002a0 ebp: 00000000 esp: c5d15e14 [4302856.257000] ds: 007b es: 007b ss: 0068 [4302856.257000] Process iwconfig (pid: 8284, threadinfo=c5d14000 task=cd0ffab0) [4302856.257000] Stack: cc57db7c b7f17000 c5d15e88 c0b059e4 c0b002a0 c0b002a0 d0b8d786 c0b059e4 [4302856.257000] 00786042 00000001 09151612 c5d15f1c c0b002a0 c0b00000 d0ba70fc c0b002a0 [4302856.257000] 00000009 00059b80 c030e3a0 00000005 31379b80 00000100 00786041 c0b002a0 [4302856.257000] Call Trace: [4302856.257000] [] AsicLockChannel+0x36/0xf0 [rt2500] [4302856.257000] [] RT2500_ioctl+0xdc/0x1040 [rt2500] [4302856.257000] [] scheduler_tick+0xcd/0x3c0 [4302856.257000] [] wireless_process_ioctl+0x2be/0x7d0 [4302856.257000] [] dev_load+0x2d/0x70 [4302856.257000] [] dev_ioctl+0x28d/0x2f0 [4302856.257000] [] do_ioctl+0x3b/0xa0 [4302856.257000] [] vfs_ioctl+0x6b/0x230 [4302856.257000] [] sys_ioctl+0x88/0xa0 [4302856.257000] [] sysenter_past_esp+0x54/0x75 [4302856.257000] Code: 00 89 5e 14 8b 44 24 20 89 46 08 89 74 24 04 89 1c 24 e8 11 fe ff ff 89 d8 8b 54 24 08 e8 06 b8 1d 00 89 f8 83 c4 0c 5b 5e 5f c3 <0f> 0b d3 00 c9 ca 31 c0 e9 65 ff ff ff 89 cb eb c8 8d b6 00 00 [4302856.257000] --- After that, the whole networking layer seems out of order. -- rt2500 seems of no use in SMP kernel package https://launchpad.net/malone/bugs/38478 From dennis at kaarsemaker.net Thu Apr 6 19:29:34 2006 From: dennis at kaarsemaker.net (Dennis Kaarsemaker) Date: Thu, 06 Apr 2006 19:29:34 -0000 Subject: [Bug 38296] Re: [Bug 38296] After upgrade to dapper, even old kernel fails - no pcmcia - error inserting genrtc References: <20060405225957.24516.75810.malonedeb@gangotri.ubuntu.com> Message-ID: <1144351775.32193.13.camel@mirage> status Rejected That is normal since dapper no longer uses hotplug and uses a udev that's incompatible with breezy kernels. ** Changed in: linux-source-2.6.12 linux-image-2.6.12-10-686 (Ubuntu) Status: Unconfirmed => Rejected -- After upgrade to dapper, even old kernel fails - no pcmcia - error inserting genrtc https://launchpad.net/malone/bugs/38296 From petrme at gmail.com Thu Apr 6 19:49:59 2006 From: petrme at gmail.com (petrme) Date: Thu, 06 Apr 2006 19:49:59 -0000 Subject: [Bug 37287] Re: No sound on Inspiron 9400 with Dapper References: <20060330074302.7863.60106.malonedeb@gangotri.ubuntu.com> Message-ID: <20060406194959.32233.13919.malone@gandwana.ubuntu.com> It's the same here. There is no sound on my TravelMate 3012WTMi with latest Dapper's updates. lspci: 0000:00:1b.0 0403: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 02) -- No sound on Inspiron 9400 with Dapper https://launchpad.net/malone/bugs/37287 From dennis at kaarsemaker.net Thu Apr 6 19:54:18 2006 From: dennis at kaarsemaker.net (Dennis Kaarsemaker) Date: Thu, 06 Apr 2006 19:54:18 -0000 Subject: [Bug 38342] Re: [Bug 38342] Re: initrd missing References: <20060406074515.32313.67931.malonedeb@gandwana.ubuntu.com> <20060406135001.32313.91096.malone@gandwana.ubuntu.com> Message-ID: <1144353258.32193.19.camel@mirage> On do, 2006-04-06 at 13:50 +0000, lyon wrote: > Great, it's all working with different image loaded, so there is no > need to worry, until you put the 2.6.15-19 image version in the final > release. 2.6.15-20 is out already - can you please test it? -- Dennis K. - Linux for human beings - http://www.ubuntu.com - Linux voor iedereen - http://www.ubuntu-nl.org -- initrd missing https://launchpad.net/malone/bugs/38342 From lyon at pvfree.net Thu Apr 6 20:14:20 2006 From: lyon at pvfree.net (lyon) Date: Thu, 06 Apr 2006 20:14:20 -0000 Subject: [Bug 38342] Re: initrd missing References: <20060406074515.32313.67931.malonedeb@gandwana.ubuntu.com> Message-ID: <20060406201420.24486.70940.malone@gangotri.ubuntu.com> All OK with 2.6.15-20-686. =) -- initrd missing https://launchpad.net/malone/bugs/38342 From mdz at ubuntu.com Thu Apr 6 20:25:31 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Thu, 06 Apr 2006 20:25:31 -0000 Subject: [Bug 35274] Re: NetVista 6824 becomes unresponsive after some time after boot References: <20060317044901.6510.45231.malonedeb@gangotri.ubuntu.com> Message-ID: <20060406202531.24486.34831.launchpad@gangotri.ubuntu.com> ** Summary changed: - It's abnormal that install ubuntu on IBM NetVista 6824 + NetVista 6824 becomes unresponsive after some time after boot ** Summary changed: - NetVista 6824 becomes unresponsive after some time after boot + NetVista 6824 becomes unresponsive after some time, OK after reboot -- NetVista 6824 becomes unresponsive after some time, OK after reboot https://launchpad.net/malone/bugs/35274 From samtygier at yahoo.co.uk Thu Apr 6 20:35:35 2006 From: samtygier at yahoo.co.uk (sam tygier) Date: Thu, 06 Apr 2006 20:35:35 -0000 Subject: [Bug 37112] Re: iBook G4, on resume from sleep, enables touch-to-click despite my preferences References: <20060329032925.6253.87634.malonedeb@gandwana.ubuntu.com> Message-ID: <20060406203535.24486.93161.malone@gangotri.ubuntu.com> running sudo /etc/init.d/pbbuttonsd start fixes it. i guess pbbuttons does not survive the sleepwake cycle. -- iBook G4, on resume from sleep, enables touch-to-click despite my preferences https://launchpad.net/malone/bugs/37112 From vincent.trouilliez at modulonet.fr Thu Apr 6 20:45:08 2006 From: vincent.trouilliez at modulonet.fr (Trouilliez vincent) Date: Thu, 06 Apr 2006 20:45:08 -0000 Subject: [Bug 27454] Re: Hibernation problem with SCSI controller References: <20060113145435.21012.82266.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060406204508.32233.53437.launchpad@gandwana.ubuntu.com> ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Unconfirmed => Fix Released -- Hibernation problem with SCSI controller https://launchpad.net/malone/bugs/27454 From gregswinford at gmail.com Thu Apr 6 20:54:41 2006 From: gregswinford at gmail.com (gregswinford) Date: Thu, 06 Apr 2006 20:54:41 -0000 Subject: [Bug 28464] Re: Include OSS driver for Ralink wireless chipset? References: <20060113174232.6087.20307.malonedeb@gangotri.ubuntu.com> Message-ID: <20060406205441.24486.28499.malone@gangotri.ubuntu.com> A generic driver for RT2x00 (including RT2500 and RT61 amongst others) is being developed here: http://rt2x00.serialmonkey.com/ This driver is currently in beta testing, but should greatly increase support for RT61 cards. Could this be incorporated into Dapper? (Not sure of timescale of this driver) Cheers. -- Include OSS driver for Ralink wireless chipset? https://launchpad.net/malone/bugs/28464 From cpinto at yimports.com Thu Apr 6 21:05:11 2006 From: cpinto at yimports.com (Celso Pinto) Date: Thu, 06 Apr 2006 21:05:11 -0000 Subject: [Bug 32784] Re: Trying to access nonexistent block-device mmcblk0 References: <20060224220659.27067.81540.malonedeb@gangotri.ubuntu.com> Message-ID: <20060406210511.32313.45488.malone@gandwana.ubuntu.com> OK, I've installed Flight 6 and it's working flawlessly. Many thanks! -- Trying to access nonexistent block-device mmcblk0 https://launchpad.net/malone/bugs/32784 From seb128 at ubuntu.com Thu Apr 6 22:16:40 2006 From: seb128 at ubuntu.com (Sebastien Bacher) Date: Thu, 06 Apr 2006 22:16:40 -0000 Subject: [Bug 38076] Re: Disk mount applet fails to mount IPod after unmounting References: <20060404192600.25515.47709.malonedeb@gangotri.ubuntu.com> Message-ID: <20060406221640.32313.87181.malone@gandwana.ubuntu.com> *** This bug is a duplicate of bug 33451 *** Looks like a duplicate of bug #33451, feel free to reopen if you disagree ** Changed in: gnome-applets (Ubuntu) Assignee: (unassigned) => Ubuntu Desktop Bugs ** This bug has been marked a duplicate of bug 33451 do not show volumeless non-removable drives -- Disk mount applet fails to mount IPod after unmounting https://launchpad.net/malone/bugs/38076 From seb128 at ubuntu.com Thu Apr 6 22:16:46 2006 From: seb128 at ubuntu.com (Sebastien Bacher) Date: Thu, 06 Apr 2006 22:16:46 -0000 Subject: [Bug 33451] Re: do not show volumeless non-removable drives References: <20060302174317.22115.59403.malonedeb@gandwana.ubuntu.com> Message-ID: <20060406221646.32313.29374.launchpad@gandwana.ubuntu.com> ** Bug 38076 has been marked a duplicate of this bug -- do not show volumeless non-removable drives https://launchpad.net/malone/bugs/33451 From petsov at googlemail.com Thu Apr 6 22:44:10 2006 From: petsov at googlemail.com (rado_london) Date: Thu, 06 Apr 2006 22:44:10 -0000 Subject: [Bug 38508] HP Pavilion dv4145ea Suspend to Ram References: <20060406224410.24486.29018.malonedeb@gangotri.ubuntu.com> Message-ID: <20060406224410.24486.29018.malonedeb@gangotri.ubuntu.com> Public bug reported: Affects: linux-meta linux-image-2.6-386 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: As I mentioned above my laptop has problem with the suspention to ram. It goes to sleep just fine, and when I try to wake it up it just hangs. The screen stays blank. I cannot even record any log or something like that. I use 2.6.15-19-386 kernel. This is my first bug report so if you need any additional information I would love to show it to you. By the way the distro is Ubuntu Flight 6 -- HP Pavilion dv4145ea Suspend to Ram https://launchpad.net/malone/bugs/38508 From ben.collins at ubuntu.com Thu Apr 6 22:44:16 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Thu, 06 Apr 2006 22:44:16 -0000 Subject: [Bug 2962] Re: [Bug 2962] Re: Register of Power Status Change Requires Removal & Reinsertion of Battery References: <20051008140639.14682.11809.malonedeb@gangotri.ubuntu.com> <20060406192352.32313.89218.malone@gandwana.ubuntu.com> Message-ID: <1144363456.4474.106.camel@grayson> On Thu, 2006-04-06 at 19:23 +0000, edal wrote: > Maybe, but I have been researching this and I have some more data. > > If I type acpi -V I get temperature and power status information correctly displayed on the terminal screen, WITHOUT having to remove the battery. I assume the acpi command gets its data from a BIOS call. If that works, and the gnome-applet doesn't, then I suspect it's a bug somewhere else. The acpi comment gets its info from the kernel. -- Register of Power Status Change Requires Removal & Reinsertion of Battery https://launchpad.net/malone/bugs/2962 From ben.collins at ubuntu.com Thu Apr 6 22:47:45 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Thu, 06 Apr 2006 22:47:45 -0000 Subject: [Bug 38473] Re: DWL-g650 not configurable References: <20060406190702.24516.69199.malonedeb@gangotri.ubuntu.com> Message-ID: <20060406224745.24516.5748.malone@gangotri.ubuntu.com> Please provide the output of dmesg and lspci -vv, and lspci -vvn. Be sure to attach these seperately, uncompressed, to the bug report. Thanks ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Unconfirmed => Needs Info -- DWL-g650 not configurable https://launchpad.net/malone/bugs/38473 From ben.collins at ubuntu.com Thu Apr 6 22:50:43 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Thu, 06 Apr 2006 22:50:43 -0000 Subject: [Bug 38464] Re: Power management stopped working on Dell Inspiron 6000 References: <20060406183554.24516.21959.malonedeb@gangotri.ubuntu.com> Message-ID: <20060406225044.24516.11422.malone@gangotri.ubuntu.com> This really sounds like something in gnome-power-manager. I know mainly that the lock screen and screen saver portions are not part of the kernel. The screen blank on lid close may also be a part of the same problem. ** Changed in: linux-source-2.6.15 linux-image-2.6.15-20-686 (Ubuntu) Sourcepackagename: linux-source-2.6.15 => gnome-power-manager Binarypackagename: linux-image-2.6.15-20-686 => None -- Power management stopped working on Dell Inspiron 6000 https://launchpad.net/malone/bugs/38464 From ben.collins at ubuntu.com Thu Apr 6 22:52:57 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Thu, 06 Apr 2006 22:52:57 -0000 Subject: [Bug 38447] Re: Acer TravelMate stucks by typing Fn+F5 References: <20060406162321.32233.99792.malonedeb@gandwana.ubuntu.com> Message-ID: <20060406225257.24516.10469.malone@gangotri.ubuntu.com> Can you please test this on dapper? ** Changed in: linux-source-2.6.15 (Ubuntu) Sourcepackagename: linux-source-2.6.15 => linux-source-2.6.12 Status: Unconfirmed => Needs Info -- Acer TravelMate stucks by typing Fn+F5 https://launchpad.net/malone/bugs/38447 From ben.collins at ubuntu.com Thu Apr 6 22:52:13 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Thu, 06 Apr 2006 22:52:13 -0000 Subject: [Bug 38461] Re: unstable ordering of eth devices References: <20060406182215.24516.22276.malonedeb@gangotri.ubuntu.com> Message-ID: <20060406225213.32233.50983.malone@gandwana.ubuntu.com> The kernel has no control over this, and the module loading order is in fact handled by udev. However, this problem can only be fixed by creating a /etc/iftab that will ensure that udev always names your network devices consistently. ** Changed in: linux-source-2.6.15 linux-image-2.6.15-20-686 (Ubuntu) Status: Unconfirmed => Rejected -- unstable ordering of eth devices https://launchpad.net/malone/bugs/38461 From ben.collins at ubuntu.com Thu Apr 6 22:59:53 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Thu, 06 Apr 2006 22:59:53 -0000 Subject: [Bug 38423] Re: suspend-resume-hibernate-resume fails something related to temperature References: <20060406142523.32233.80007.malonedeb@gandwana.ubuntu.com> Message-ID: <20060406225953.24516.51491.malone@gangotri.ubuntu.com> This really looks like it might be a hardware bug. Two things I need, 1) Is this dapper, and if so, which kernel version. 2) Please check for updates for your laptop's BIOS. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Unconfirmed => Needs Info -- suspend-resume-hibernate-resume fails something related to temperature https://launchpad.net/malone/bugs/38423 From ben.collins at ubuntu.com Thu Apr 6 22:59:45 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Thu, 06 Apr 2006 22:59:45 -0000 Subject: [Bug 38421] Re: no aic94xx support in dapper kernel References: <20060406142318.24516.55253.malonedeb@gangotri.ubuntu.com> Message-ID: <20060406225945.24516.48099.malone@gangotri.ubuntu.com> Unfortunately this late in the release cycle we may not have to to introduce a new driver. ** Changed in: linux-source-2.6.15 (Ubuntu) Severity: Normal => Minor -- no aic94xx support in dapper kernel https://launchpad.net/malone/bugs/38421 From dennis at kaarsemaker.net Thu Apr 6 22:57:17 2006 From: dennis at kaarsemaker.net (Dennis Kaarsemaker) Date: Thu, 06 Apr 2006 22:57:17 -0000 Subject: [Bug 38342] Re: [Bug 38342] Re: initrd missing References: <20060406074515.32313.67931.malonedeb@gandwana.ubuntu.com> <20060406201420.24486.70940.malone@gangotri.ubuntu.com> Message-ID: <1144364237.9686.2.camel@mirage> Awesome! status FixReleased ** Changed in: linux-source-2.6.15 linux-image-2.6.15-20-386 (Ubuntu) Status: Unconfirmed => Fix Released -- initrd missing https://launchpad.net/malone/bugs/38342 From ben.collins at ubuntu.com Thu Apr 6 23:02:25 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Thu, 06 Apr 2006 23:02:25 -0000 Subject: [Bug 38333] Re: Hibernation stopped working with Flight 6 on Dell Latitude 110l References: <20060406065824.24486.88971.malonedeb@gangotri.ubuntu.com> Message-ID: <20060406230225.32233.71498.malone@gandwana.ubuntu.com> Can you attach /var/log/kern.log from a full hibernate/resume attempt? ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Unconfirmed => Needs Info -- Hibernation stopped working with Flight 6 on Dell Latitude 110l https://launchpad.net/malone/bugs/38333 From ihatepickles at gmail.com Thu Apr 6 23:13:01 2006 From: ihatepickles at gmail.com (Steve Smith) Date: Thu, 06 Apr 2006 23:13:01 -0000 Subject: [Bug 37287] Re: No sound on Inspiron 9400 with Dapper References: <20060330074302.7863.60106.malonedeb@gangotri.ubuntu.com> Message-ID: <20060406231301.24486.11482.malone@gangotri.ubuntu.com> The kernel update from earlier this week fixed my sound issue, I'm now running 2.6.15-20-686 SMP with no sound problems. -- No sound on Inspiron 9400 with Dapper https://launchpad.net/malone/bugs/37287 From ben.collins at ubuntu.com Thu Apr 6 23:20:07 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Thu, 06 Apr 2006 23:20:07 -0000 Subject: [Bug 38228] Re: ACPI broken on IBM ThinkPad R40e (fix) References: <20060405172801.24486.46855.malonedeb@gangotri.ubuntu.com> Message-ID: <20060406232007.32233.30731.launchpad@gandwana.ubuntu.com> ** Changed in: linux-source-2.6.15 kernel-image-2.6.15-19-386-di (Ubuntu) Status: Unconfirmed => Fix Committed -- ACPI broken on IBM ThinkPad R40e (fix) https://launchpad.net/malone/bugs/38228 From ben.collins at ubuntu.com Thu Apr 6 23:25:17 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Thu, 06 Apr 2006 23:25:17 -0000 Subject: [Bug 38220] Re: Xorg [dri] i915 kernel module is 1.1 References: <20060405164018.24486.5077.malonedeb@gangotri.ubuntu.com> Message-ID: <20060406232517.24486.83408.malone@gangotri.ubuntu.com> Nothing in the kernel changed. Latest version of the driver is 1.1.0 (even 2.6.17-git is 1.1.0 for the i915). Something must be whacked in the xorg driver. ** Changed in: linux-source-2.6.15 (Ubuntu) Sourcepackagename: linux-source-2.6.15 => xserver-xorg-driver-i810 -- Xorg [dri] i915 kernel module is 1.1 https://launchpad.net/malone/bugs/38220 From ben.collins at ubuntu.com Thu Apr 6 23:26:50 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Thu, 06 Apr 2006 23:26:50 -0000 Subject: [Bug 38219] Re: Gnome freezes after log in References: <20060405162101.24486.32586.malonedeb@gangotri.ubuntu.com> Message-ID: <20060406232650.32313.84320.malone@gandwana.ubuntu.com> Does sound also work when logging in from the workaround? -- Gnome freezes after log in https://launchpad.net/malone/bugs/38219 From ben.collins at ubuntu.com Thu Apr 6 23:27:42 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Thu, 06 Apr 2006 23:27:42 -0000 Subject: [Bug 38218] Re: sky2 module update broken References: <20060405161344.32313.90376.malonedeb@gandwana.ubuntu.com> Message-ID: <20060406232743.24516.49089.malone@gangotri.ubuntu.com> Please attach the file produced by "dmesg > dmesg.txt". ** Changed in: linux-source-2.6.15 linux-image-2.6.15-20-686 (Ubuntu) Status: Unconfirmed => Needs Info -- sky2 module update broken https://launchpad.net/malone/bugs/38218 From ben.collins at ubuntu.com Thu Apr 6 23:29:52 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Thu, 06 Apr 2006 23:29:52 -0000 Subject: [Bug 38188] Re: Last kernel upgrade on Dapper hangs and block apt/aptitude References: <20060405133341.14572.88724.malonedeb@gandwana.ubuntu.com> Message-ID: <20060406232952.24486.37558.malone@gangotri.ubuntu.com> The initial problem seems to be that you killed dpkg/apt during the kernel installation, and left it in a bad state. The "hang" is nothing more than the post-install creating the initramfs image. ** Changed in: linux-source-2.6.15 linux-image-2.6.15-20-686 (Ubuntu) Status: Unconfirmed => Rejected -- Last kernel upgrade on Dapper hangs and block apt/aptitude https://launchpad.net/malone/bugs/38188 From robitaille at gmail.com Thu Apr 6 23:37:22 2006 From: robitaille at gmail.com (Daniel Robitaille) Date: Thu, 06 Apr 2006 23:37:22 -0000 Subject: [Bug 38333] Re: Hibernation stopped working with Flight 6 on Dell Latitude 110l References: <20060406065824.24486.88971.malonedeb@gangotri.ubuntu.com> Message-ID: <20060406233722.32233.97966.launchpad@gandwana.ubuntu.com> ** Attachment added: "/var/log/kern.log" http://librarian.launchpad.net/1966132/kern.log -- Hibernation stopped working with Flight 6 on Dell Latitude 110l https://launchpad.net/malone/bugs/38333 From david.latreyte at wanadoo.fr Thu Apr 6 23:59:46 2006 From: david.latreyte at wanadoo.fr (Dl) Date: Thu, 06 Apr 2006 23:59:46 -0000 Subject: [Bug 37182] 2.6.15.* kernels fail to boot on amd machine with nvidia chipset References: <20060329155808.7863.44273.malonedeb@gangotri.ubuntu.com> Message-ID: <20060406235946.24486.87412.launchpad@canonical@gangotri.ubuntu.com> Public bug reported: Affects: Ubuntu Severity: Normal Priority: (none set) Status: Rejected Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: The 2.6.15.* kernels fail to boot on Dapper with amd 1700+ cpu and nVidia Corporation nForce chipset. (here the result of lspci bash: lspci: command not found [mats at Aqua ~]$ /sbin/lspci 00:00.0 Host bridge: nVidia Corporation nForce CPU bridge (rev b2) 00:00.1 RAM memory: nVidia Corporation nForce 220/420 Memory Controller (rev b2) 00:00.2 RAM memory: nVidia Corporation nForce 220/420 Memory Controller (rev b2) 00:00.3 RAM memory: nVidia Corporation nForce 420 Memory Controller (DDR) (rev b 2) 00:01.0 ISA bridge: nVidia Corporation nForce ISA Bridge (rev c3) 00:01.1 SMBus: nVidia Corporation nForce PCI System Management (rev c1) 00:02.0 USB Controller: nVidia Corporation nForce USB Controller (rev c3) 00:03.0 USB Controller: nVidia Corporation nForce USB Controller (rev c3) 00:05.0 Multimedia audio controller: nVidia Corporation nForce Audio (rev c2) 00:06.0 Multimedia audio controller: nVidia Corporation nForce Audio (rev c2) 00:08.0 PCI bridge: nVidia Corporation nForce PCI-to-PCI bridge (rev c2) 00:09.0 IDE interface: nVidia Corporation nForce IDE (rev c3) 00:1e.0 PCI bridge: nVidia Corporation nForce AGP to PCI Bridge (rev b2) 01:07.0 USB Controller: ALi Corporation USB 1.1 Controller (rev 03) 01:07.1 USB Controller: ALi Corporation USB 1.1 Controller (rev 03) 01:07.2 USB Controller: ALi Corporation USB 1.1 Controller (rev 03) 01:07.3 USB Controller: ALi Corporation USB 2.0 Controller (rev 01) 01:08.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139 C+ (rev 10) 02:00.0 VGA compatible controller: nVidia Corporation NV11 [GeForce2 MX/MX 400] (rev b2) ) The boot process appears to stop with : Booting 'Ubuntu, kernel 2.6.15-18-386' root (hd0,0) Filesystme tye is ext2fs, partition type 0x83 kernel /boot/vmlinuz-2.6.15-18-386 root=/dev/hda1 ro quiet splash [Linux-bzimage, setup=0x1e00, size=0x156718] initrd /boot/initrd.img-2.6.15-18-386 [Linux-initrd @ 0x1f9ac000, 0x62fcba bytes] savedefault boot I have four partitions: /boot (ext2), /swap, / (ext3), /home (ext3). I haven't any problem with the kernels from breezy and the Suse's 2.6.16 kernel. Note: the original reporter indicated the bug was in package 'kernel- image-2.6.15-9-386-di'; however, that package was not published in Ubuntu. Public bug reported: Affects: Ubuntu Severity: Normal Priority: (none set) Status: Rejected Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: The 2.6.15.* kernels fail to boot on Dapper with amd 1700+ cpu and nVidia Corporation nForce chipset. (here the result of lspci bash: lspci: command not found [mats at Aqua ~]$ /sbin/lspci 00:00.0 Host bridge: nVidia Corporation nForce CPU bridge (rev b2) 00:00.1 RAM memory: nVidia Corporation nForce 220/420 Memory Controller (rev b2) 00:00.2 RAM memory: nVidia Corporation nForce 220/420 Memory Controller (rev b2) 00:00.3 RAM memory: nVidia Corporation nForce 420 Memory Controller (DDR) (rev b 2) 00:01.0 ISA bridge: nVidia Corporation nForce ISA Bridge (rev c3) 00:01.1 SMBus: nVidia Corporation nForce PCI System Management (rev c1) 00:02.0 USB Controller: nVidia Corporation nForce USB Controller (rev c3) 00:03.0 USB Controller: nVidia Corporation nForce USB Controller (rev c3) 00:05.0 Multimedia audio controller: nVidia Corporation nForce Audio (rev c2) 00:06.0 Multimedia audio controller: nVidia Corporation nForce Audio (rev c2) 00:08.0 PCI bridge: nVidia Corporation nForce PCI-to-PCI bridge (rev c2) 00:09.0 IDE interface: nVidia Corporation nForce IDE (rev c3) 00:1e.0 PCI bridge: nVidia Corporation nForce AGP to PCI Bridge (rev b2) 01:07.0 USB Controller: ALi Corporation USB 1.1 Controller (rev 03) 01:07.1 USB Controller: ALi Corporation USB 1.1 Controller (rev 03) 01:07.2 USB Controller: ALi Corporation USB 1.1 Controller (rev 03) 01:07.3 USB Controller: ALi Corporation USB 2.0 Controller (rev 01) 01:08.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139 C+ (rev 10) 02:00.0 VGA compatible controller: nVidia Corporation NV11 [GeForce2 MX/MX 400] (rev b2) ) The boot process appears to stop with : Booting 'Ubuntu, kernel 2.6.15-18-386' root (hd0,0) Filesystme tye is ext2fs, partition type 0x83 kernel /boot/vmlinuz-2.6.15-18-386 root=/dev/hda1 ro quiet splash [Linux-bzimage, setup=0x1e00, size=0x156718] initrd /boot/initrd.img-2.6.15-18-386 [Linux-initrd @ 0x1f9ac000, 0x62fcba bytes] savedefault boot I have four partitions: /boot (ext2), /swap, / (ext3), /home (ext3). I haven't any problem with the kernels from breezy and the Suse's 2.6.16 kernel. Note: the original reporter indicated the bug was in package 'kernel- image-2.6.15-9-386-di'; however, that package was not published in Ubuntu. -- 2.6.15.* kernels fail to boot on amd machine with nvidia chipset https://launchpad.net/malone/bugs/37182 From dennis at kaarsemaker.net Thu Apr 6 23:59:12 2006 From: dennis at kaarsemaker.net (Dennis Kaarsemaker) Date: Thu, 06 Apr 2006 23:59:12 -0000 Subject: [Bug 37182] Re: 2.6.15.* kernels fail to boot on amd machine with nvidia chipset References: <20060329155808.7863.44273.malonedeb@gangotri.ubuntu.com> Message-ID: <20060406235912.24486.97308.malone@gangotri.ubuntu.com> no need for two tasks in one report ** Changed in: Ubuntu Status: Unconfirmed => Rejected -- 2.6.15.* kernels fail to boot on amd machine with nvidia chipset https://launchpad.net/malone/bugs/37182 From dennis at kaarsemaker.net Thu Apr 6 23:59:46 2006 From: dennis at kaarsemaker.net (Dennis Kaarsemaker) Date: Thu, 06 Apr 2006 23:59:46 -0000 Subject: [Bug 37182] Re: 2.6.15.* kernels fail to boot on amd machine with nvidia chipset References: <20060329155808.7863.44273.malonedeb@gangotri.ubuntu.com> Message-ID: <20060406235946.24486.52267.malone@gangotri.ubuntu.com> Have you tested with the latest kernel (2.6.15-20)? ** Changed in: linux-image-386 (Ubuntu) Sourcepackagename: linux-image-386 => linux-source-2.6.15 -- 2.6.15.* kernels fail to boot on amd machine with nvidia chipset https://launchpad.net/malone/bugs/37182 From peter at bozen.org Fri Apr 7 00:12:42 2006 From: peter at bozen.org (pkupp) Date: Fri, 07 Apr 2006 00:12:42 -0000 Subject: [Bug 35397] ICH6 ALC203 - sound bud mixer does not work References: <20060317211201.12186.68004.malonedeb@gandwana.ubuntu.com> Message-ID: <20060407001242.24516.26142.launchpad@canonical@gangotri.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: I did a new install on Dapper Flight4 - daily updates since then I have a Fujitsu-Siemens 8020 Laptop Sound works - playback Midi not detected When I change something in Mixer like Volume it has no Effect External Mic Input does not work Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: I did a new install on Dapper Flight4 - daily updates since then I have a Fujitsu-Siemens 8020 Laptop Sound works - playback Midi not detected When I change something in Mixer like Volume it has no Effect External Mic Input does not work -- ICH6 ALC203 - sound bud mixer does not work https://launchpad.net/malone/bugs/35397 From cbinusa at gmail.com Fri Apr 7 00:05:54 2006 From: cbinusa at gmail.com (cbinusa) Date: Fri, 07 Apr 2006 00:05:54 -0000 Subject: [Bug 38473] Re: DWL-g650 not configurable References: <20060406190702.24516.69199.malonedeb@gangotri.ubuntu.com> <20060406224745.24516.5748.malone@gangotri.ubuntu.com> Message-ID: Done. Thanks for looking into it. On 4/6/06, Ben Collins wrote: > Please provide the output of dmesg and lspci -vv, and lspci -vvn. Be sure to attach these seperately, uncompressed, to the bug report. > > Thanks > > ** Changed in: linux-source-2.6.15 (Ubuntu) > Status: Unconfirmed => Needs Info > -- > DWL-g650 not configurable > https://launchpad.net/malone/bugs/38473 > ** Attachment added: "dmesg" http://librarian.launchpad.net/1966153/dmesg ** Attachment added: "lspcivv" http://librarian.launchpad.net/1966154/lspcivv ** Attachment added: "lspcivvn" http://librarian.launchpad.net/1966155/lspcivvn ** Attachment added: "screenshot" http://librarian.launchpad.net/1966160/DeviceMan ** Attachment added: "Connection screenshot" http://librarian.launchpad.net/1966162/connction%20properties -- DWL-g650 not configurable https://launchpad.net/malone/bugs/38473 From mdz at ubuntu.com Fri Apr 7 00:12:41 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Fri, 07 Apr 2006 00:12:41 -0000 Subject: [Bug 35397] Re: ICH6 ALC203 - sound bud mixer does not work References: <20060317211201.12186.68004.malonedeb@gandwana.ubuntu.com> Message-ID: <20060407001242.24516.99210.launchpad@gangotri.ubuntu.com> ** Changed in: alsa-driver (Ubuntu) Sourcepackagename: alsa-driver => linux-source-2.6.15 -- ICH6 ALC203 - sound bud mixer does not work https://launchpad.net/malone/bugs/35397 From paindistributor at web.de Fri Apr 7 00:28:33 2006 From: paindistributor at web.de (Benjamin Kuhnert) Date: Fri, 07 Apr 2006 00:28:33 -0000 Subject: [Bug 35389] Dapper flight 5: Installation hangs at formating harddisk progress References: <20060317203252.26204.93137.malonedeb@gangotri.ubuntu.com> Message-ID: <20060407002833.24486.88119.launchpad@canonical@gangotri.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Assignee: Ben Collins Status: Unconfirmed Description: Hi Ubuntu team, i've tried to install dapper flight 5 on my workstation, but the installation stucked at the formating progress. I've noticed two different behaviours at the installation: first one: 1. boot from cd "Install to the harddisk" 2. select language and keyboard settings to german 3. setup network with dhcp 4. partitioning setup: -> harddisk 1: 3 partitions, first is "/" (ext3), second is swap, third is data (ext3) -> harddisk 2: 3 windows partitions, first is ntfs, second is ntfs, third is fat32 5. accept to format the first and second partition of the first harddisk (other partitions remain) 6. format progress bar loads to 100% and hangs (no harddisk activities) second one: -> all steps from the first one but... -> ...format progress bar finished at 100% and disappears -> the blue screen remains and nothing happens then (no harddisk activities ) A look in the dmesg output shows the error message that appears every 10-20 seconds. "[4294898.494000] ata1: command 0x25 timeout, stat 0x50 host_stat 0x24" In both cases i'm not able to restart the pc with CRTL+ALT+DEL. After that i boot the pc with the cd into a shell and tried to setup the partitions by hand. I've noticed the same behavior (and error messages) by running the "mkfs.ext3" command. Perhaps it's an driver issue. ------------------------ Hardware: - AMD Spempron 2500+ - 1280MB DDR memory (1x 1024, 1x 256) - MSI K8NGM-V Mainboard with NFORCE410 and NVIDIA C51G Chipset (USB, network, sata, pcie) - pcie Geforce GT 6600 - Creative Soundblaster Audigy 2 - Samsung IDE DVD-RW drive - 80Gb Samsung SATA2 HD080HJ drive (first boot drive) -> 1 partition (ext3), 1 partition (swap), 1 partition (ext3) - 80Gb Maxtor 4D060H3 IDE drive -> 2 partitions (windows ntfs), 1 partition (fat32) ------------------------ dmesg: 48576 bytes) [4294669.706000] TCP bind hash table entries: 65536 (order: 6, 262144 bytes) [4294669.706000] TCP: Hash tables configured (established 262144 bind 65536) [4294669.706000] TCP reno registered [4294669.707000] TCP bic registered [4294669.707000] NET: Registered protocol family 1 [4294669.707000] NET: Registered protocol family 8 [4294669.707000] NET: Registered protocol family 20 [4294669.707000] Using IPI Shortcut mode [4294669.707000] Freeing unused kernel memory: 288k freed [4294669.740000] input: AT Translated Set 2 keyboard as /class/input/input0 [4294670.249000] SCSI subsystem initialized [4294670.250000] libata version 1.20 loaded. [4294670.251000] sata_nv 0000:00:0e.0: version 0.8 [4294670.251000] PCI: Setting latency timer of device 0000:00:0e.0 to 64 [4294670.251000] ata1: SATA max UDMA/133 cmd 0xD800 ctl 0xD482 bmdma 0xD000 irq 5 [4294670.251000] ata2: SATA max UDMA/133 cmd 0xD400 ctl 0xD082 bmdma 0xD008 irq 5 [4294670.297000] ieee1394: Initialized config rom entry `ip1394' [4294670.349000] usbcore: registered new driver usbfs [4294670.349000] usbcore: registered new driver hub [4294670.350000] ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) [4294670.350000] PCI: Setting latency timer of device 0000:00:0b.0 to 64 [4294670.350000] ohci_hcd 0000:00:0b.0: OHCI Host Controller [4294670.350000] ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 1 [4294670.350000] ohci_hcd 0000:00:0b.0: irq 5, io mem 0xf7fbe000 [4294670.408000] hub 1-0:1.0: USB hub found [4294670.408000] hub 1-0:1.0: 8 ports detected [4294670.542000] PCI: Setting latency timer of device 0000:00:0b.1 to 64 [4294670.542000] ehci_hcd 0000:00:0b.1: EHCI Host Controller [4294670.542000] ehci_hcd 0000:00:0b.1: debug port 1 [4294670.542000] PCI: cache line size of 64 is not supported by device 0000:00:0b.1 [4294670.542000] ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 2 [4294670.542000] ehci_hcd 0000:00:0b.1: irq 7, io mem 0xf7fbfc00 [4294670.542000] ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [4294670.542000] hub 2-0:1.0: USB hub found [4294670.542000] hub 2-0:1.0: 8 ports detected [4294670.622000] ata1: dev 0 cfg 49:2f00 82:746b 83:7f01 84:4023 85:7469 86:3c01 87:4023 88:40ff [4294670.622000] ata1: dev 0 ATA-7, max UDMA7, 156301488 sectors: LBA48 [4294670.622000] ata1: dev 0 configured for UDMA/133 [4294670.622000] scsi0 : sata_nv [4294670.823000] ata2: no device found (phy stat 00000000) [4294670.823000] scsi1 : sata_nv [4294670.823000] Vendor: ATA Model: SAMSUNG HD080HJ Rev: ZH10 [4294670.823000] Type: Direct-Access ANSI SCSI revision: 05 [4294670.830000] NFORCE-MCP51: IDE controller at PCI slot 0000:00:0d.0 [4294670.830000] NFORCE-MCP51: chipset revision 161 [4294670.830000] NFORCE-MCP51: not 100% native mode: will probe irqs later [4294670.830000] NFORCE-MCP51: 0000:00:0d.0 (rev a1) UDMA133 controller [4294670.830000] ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio [4294670.830000] ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:pio [4294670.830000] Probing IDE interface ide0... [4294670.839000] ohci1394: $Rev: 1313 $ Ben Collins [4294670.890000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[5] MMIO=[febff800-febfffff] Max Packet=[2048] [4294670.923000] SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB) [4294670.923000] SCSI device sda: drive cache: write back [4294670.932000] SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB) [4294670.932000] SCSI device sda: drive cache: write back [4294670.932000] sda: sda1 sda2 sda3 [4294670.956000] sd 0:0:0:0: Attached scsi disk sda [4294670.959000] sd 0:0:0:0: Attached scsi generic sg0 type 0 [4294671.094000] hda: Maxtor 4D060H3, ATA DISK drive [4294671.296000] usb 1-2: new low speed USB device using ohci_hcd and address 2 [4294671.663000] usb 1-4: new full speed USB device using ohci_hcd and address 3 [4294671.706000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [4294671.706000] Probing IDE interface ide1... [4294671.811000] usbcore: registered new driver hiddev [4294672.146000] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00023c009101f149] [4294672.378000] hdc: TSSTcorpCD/DVDW TS-H552U, ATAPI CD/DVD-ROM drive [4294672.990000] ide1 at 0x170-0x177,0x376 on irq 15 [4294672.995000] hda: max request size: 128KiB [4294673.002000] hda: 120069936 sectors (61475 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100) [4294673.002000] hda: cache flushes not supported [4294673.002000] hda: hda1 hda2 < hda5 hda6 > [4294673.044000] hdc: ATAPI 32X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33) [4294673.045000] Uniform CD-ROM driver Revision: 3.20 [4294681.822000] drivers/usb/input/hid-core.c: timeout initializing reports [4294681.822000] [4294681.822000] input: Logitech Inc. iFeel Mouse as /class/input/input1 [4294681.822000] input: USB HID v1.00 Mouse [Logitech Inc. iFeel Mouse ] on usb-0000:00:0b.0-2 [4294681.822000] usbcore: registered new driver usbhid [4294681.822000] drivers/usb/input/hid-core.c: v2.6:USB HID core driver [4294682.525000] usbcore: registered new driver usbkbd [4294682.525000] drivers/usb/input/usbkbd.c: :USB HID Boot Protocol keyboard driver [4294682.539000] usbcore: registered new driver usbserial [4294682.539000] drivers/usb/serial/usb-serial.c: USB Serial support registered for generic [4294682.540000] usbcore: registered new driver usbserial_generic [4294682.540000] drivers/usb/serial/usb-serial.c: USB Serial Driver core [4294682.816000] vesafb: framebuffer at 0xd8000000, mapped to 0xf8a00000, using 3750k, total 131072k [4294682.817000] vesafb: mode is 800x600x32, linelength=3200, pages=1 [4294682.817000] vesafb: protected mode interface info at c000:d6b0 [4294682.817000] vesafb: scrolling: redraw [4294682.817000] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [4294682.817000] vesafb: Mode is VGA compatible [4294682.817000] fb0: VESA VGA frame buffer device [4294682.839000] Console: switching to colour frame buffer device 100x37 [4294699.785000] Initializing USB Mass Storage driver... [4294699.785000] usbcore: registered new driver usb-storage [4294699.786000] USB Mass Storage support registered. [4294702.839000] floppy0: no floppy controllers found [4294703.863000] ide-floppy driver 0.99.newide [4294703.999000] sbp2: $Rev: 1306 $ Ben Collins [4294704.000000] ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1) [4294704.000000] ieee1394: sbp2: Try serialize_io=0 for better performance [4294704.245000] Intel ISA PCIC probe: not found. [4294708.671000] ISO 9660 Extensions: Microsoft Joliet Level 3 [4294708.735000] ISO 9660 Extensions: RRIP_1991A [4294726.422000] forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.48. [4294726.422000] PCI: Setting latency timer of device 0000:00:14.0 to 64 [4294726.934000] eth0: forcedeth.c: subsystem: 01462:7228 bound to 0000:00:14.0 [4294730.558000] floppy0: no floppy controllers found [4294730.783000] Intel ISA PCIC probe: not found. [4294736.048000] NET: Registered protocol family 17 [4294816.654000] floppy0: no floppy controllers found [4294816.877000] Intel ISA PCIC probe: not found. [4294822.627000] JFS: nTxBlock = 8192, nTxLock = 65536 [4294822.786000] SGI XFS with ACLs, security attributes, realtime, large block numbers, no debug enabled [4294822.786000] SGI XFS Quota Management subsystem [4294859.939000] Adding 1052248k swap on /dev/sda3. Priority:-1 extents:1 across:1052248k [4294898.494000] ata1: command 0x25 timeout, stat 0x50 host_stat 0x24 [4294928.500000] ata1: command 0x25 timeout, stat 0x50 host_stat 0x24 ------------------------ ps -ax: (setup hangs at this time) PID Uid VmSize Stat Command 1 root 448 S init 2 root SWN [ksoftirqd/0] 3 root SW [watchdog/0] 4 root SW< [events/0] 5 root SW< [khelper] 6 root SW< [kthread] 8 root SW< [kblockd/0] 90 root SW [pdflush] 92 root SW [kswapd0] 93 root SW< [aio/0] 687 root SW< [kseriod] 795 root 360 S < udevd --daemon 1484 root SW< [ata/0] 1485 root SW< [scsi_eh_0] 1486 root SW< [scsi_eh_1] 1511 root SW< [khubd] 1497 root SW [khpsbpkt] 1597 root SW [knodemgrd_0] 1833 root 356 S /sbin/syslogd -m 0 -O /var/log/syslog -S 1836 root 344 S /sbin/klogd -c 2 2108 root 472 S /bin/sh /sbin/debian-installer 2116 root 332 S /usr/bin/tail -f /var/log/messages 2119 root 336 S /usr/bin/tail -f /var/log/syslog 2122 root 668 R /bin/sh 2176 root 720 S /usr/bin/bterm -f /lib/unifont.bgf -l C.UTF-8 /lib/debian-installer/menu 2177 root 9900 S debconf -o d-i /usr/bin/main-menu 2178 root 572 S /usr/bin/main-menu 15370 root 616 S udpkg --configure --force-configure partman-base 15371 root 496 S /bin/sh /var/lib/dpkg/info/partman-base.postinst configure 15372 root 664 S /bin/sh /bin/partman 15769 root SW [jfsIO] 15770 root SW [jfsCommit] 15771 root SW [jfsSync] 15936 root SW< [xfslogd/0] 15937 root SW< [xfsdatad/0] 15938 root SW< [xfsbufd] 15979 root 852 S parted_server 23894 root 636 S /bin/sh /lib/partman/commit.d/50format_ext3 24624 root SW [pdflush] 24632 root 404 S log-output -t partman --pass-stdout /sbin/tune2fs -j /dev/sda1 24633 root 1356 D /sbin/tune2fs -j /dev/sda1 24642 root 540 R ps -ax ------------------------ lsmod: Module Size Used by nls_iso8859_1 4224 1 xfs 589656 0 exportfs 6272 1 xfs reiserfs 268016 0 jfs 195780 0 ext3 135688 0 jbd 58772 1 ext3 vfat 13440 1 fat 53020 1 vfat ext2 68360 0 af_packet 22920 2 forcedeth 23556 0 nls_cp437 5888 2 rsrc_nonstatic 13440 0 pcmcia_core 42640 1 rsrc_nonstatic sr_mod 16932 0 sbp2 24196 0 isofs 37688 1 ide_floppy 19328 0 ide_generic 1536 0 pdc202xx_new 9600 0 aec62xx 7936 0 alim15x3 12428 0 [permanent] atiixp 6800 0 cmd64x 12444 0 cs5520 5248 0 cs5530 5632 0 [permanent] cy82c693 4740 0 [permanent] hpt34x 5632 0 ns87415 4552 0 [permanent] opti621 4484 0 [permanent] pdc202xx_old 11392 0 piix 11012 0 rz1000 3200 0 sc1200 7552 0 [permanent] serverworks 9736 0 [permanent] siimage 12672 0 sis5513 17032 0 slc90e66 6016 0 [permanent] triflex 3968 0 [permanent] trm290 4868 0 via82cxxx 9988 0 [permanent] usb_storage 74176 0 fbcon 42784 68 tileblit 2816 1 fbcon font 8320 1 fbcon bitblit 6272 1 fbcon softcursor 2304 1 bitblit vesafb 8476 2 usbserial 31336 0 usbkbd 7040 0 processor 23360 0 ide_cd 33028 1 cdrom 38560 2 sr_mod,ide_cd ide_disk 17664 2 usbhid 38368 0 sg 37920 0 sd_mod 19984 3 amd74xx 15132 0 [permanent] generic 5124 0 ehci_hcd 32008 0 psmouse 36100 0 ohci_hcd 21892 0 usbcore 129668 7 usb_storage,usbserial,usbkbd,usbhid,ehci_hcd,ohci_hcd ohci1394 35124 0 ieee1394 299832 2 sbp2,ohci1394 sata_nv 9732 2 libata 61704 1 sata_nv scsi_mod 138984 6 sr_mod,sbp2,usb_storage,sg,sd_mod,libata evdev 9856 0 Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Assignee: Ben Collins Status: Unconfirmed Description: Hi Ubuntu team, i've tried to install dapper flight 5 on my workstation, but the installation stucked at the formating progress. I've noticed two different behaviours at the installation: first one: 1. boot from cd "Install to the harddisk" 2. select language and keyboard settings to german 3. setup network with dhcp 4. partitioning setup: -> harddisk 1: 3 partitions, first is "/" (ext3), second is swap, third is data (ext3) -> harddisk 2: 3 windows partitions, first is ntfs, second is ntfs, third is fat32 5. accept to format the first and second partition of the first harddisk (other partitions remain) 6. format progress bar loads to 100% and hangs (no harddisk activities) second one: -> all steps from the first one but... -> ...format progress bar finished at 100% and disappears -> the blue screen remains and nothing happens then (no harddisk activities ) A look in the dmesg output shows the error message that appears every 10-20 seconds. "[4294898.494000] ata1: command 0x25 timeout, stat 0x50 host_stat 0x24" In both cases i'm not able to restart the pc with CRTL+ALT+DEL. After that i boot the pc with the cd into a shell and tried to setup the partitions by hand. I've noticed the same behavior (and error messages) by running the "mkfs.ext3" command. Perhaps it's an driver issue. ------------------------ Hardware: - AMD Spempron 2500+ - 1280MB DDR memory (1x 1024, 1x 256) - MSI K8NGM-V Mainboard with NFORCE410 and NVIDIA C51G Chipset (USB, network, sata, pcie) - pcie Geforce GT 6600 - Creative Soundblaster Audigy 2 - Samsung IDE DVD-RW drive - 80Gb Samsung SATA2 HD080HJ drive (first boot drive) -> 1 partition (ext3), 1 partition (swap), 1 partition (ext3) - 80Gb Maxtor 4D060H3 IDE drive -> 2 partitions (windows ntfs), 1 partition (fat32) ------------------------ dmesg: 48576 bytes) [4294669.706000] TCP bind hash table entries: 65536 (order: 6, 262144 bytes) [4294669.706000] TCP: Hash tables configured (established 262144 bind 65536) [4294669.706000] TCP reno registered [4294669.707000] TCP bic registered [4294669.707000] NET: Registered protocol family 1 [4294669.707000] NET: Registered protocol family 8 [4294669.707000] NET: Registered protocol family 20 [4294669.707000] Using IPI Shortcut mode [4294669.707000] Freeing unused kernel memory: 288k freed [4294669.740000] input: AT Translated Set 2 keyboard as /class/input/input0 [4294670.249000] SCSI subsystem initialized [4294670.250000] libata version 1.20 loaded. [4294670.251000] sata_nv 0000:00:0e.0: version 0.8 [4294670.251000] PCI: Setting latency timer of device 0000:00:0e.0 to 64 [4294670.251000] ata1: SATA max UDMA/133 cmd 0xD800 ctl 0xD482 bmdma 0xD000 irq 5 [4294670.251000] ata2: SATA max UDMA/133 cmd 0xD400 ctl 0xD082 bmdma 0xD008 irq 5 [4294670.297000] ieee1394: Initialized config rom entry `ip1394' [4294670.349000] usbcore: registered new driver usbfs [4294670.349000] usbcore: registered new driver hub [4294670.350000] ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) [4294670.350000] PCI: Setting latency timer of device 0000:00:0b.0 to 64 [4294670.350000] ohci_hcd 0000:00:0b.0: OHCI Host Controller [4294670.350000] ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 1 [4294670.350000] ohci_hcd 0000:00:0b.0: irq 5, io mem 0xf7fbe000 [4294670.408000] hub 1-0:1.0: USB hub found [4294670.408000] hub 1-0:1.0: 8 ports detected [4294670.542000] PCI: Setting latency timer of device 0000:00:0b.1 to 64 [4294670.542000] ehci_hcd 0000:00:0b.1: EHCI Host Controller [4294670.542000] ehci_hcd 0000:00:0b.1: debug port 1 [4294670.542000] PCI: cache line size of 64 is not supported by device 0000:00:0b.1 [4294670.542000] ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 2 [4294670.542000] ehci_hcd 0000:00:0b.1: irq 7, io mem 0xf7fbfc00 [4294670.542000] ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [4294670.542000] hub 2-0:1.0: USB hub found [4294670.542000] hub 2-0:1.0: 8 ports detected [4294670.622000] ata1: dev 0 cfg 49:2f00 82:746b 83:7f01 84:4023 85:7469 86:3c01 87:4023 88:40ff [4294670.622000] ata1: dev 0 ATA-7, max UDMA7, 156301488 sectors: LBA48 [4294670.622000] ata1: dev 0 configured for UDMA/133 [4294670.622000] scsi0 : sata_nv [4294670.823000] ata2: no device found (phy stat 00000000) [4294670.823000] scsi1 : sata_nv [4294670.823000] Vendor: ATA Model: SAMSUNG HD080HJ Rev: ZH10 [4294670.823000] Type: Direct-Access ANSI SCSI revision: 05 [4294670.830000] NFORCE-MCP51: IDE controller at PCI slot 0000:00:0d.0 [4294670.830000] NFORCE-MCP51: chipset revision 161 [4294670.830000] NFORCE-MCP51: not 100% native mode: will probe irqs later [4294670.830000] NFORCE-MCP51: 0000:00:0d.0 (rev a1) UDMA133 controller [4294670.830000] ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio [4294670.830000] ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:pio [4294670.830000] Probing IDE interface ide0... [4294670.839000] ohci1394: $Rev: 1313 $ Ben Collins [4294670.890000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[5] MMIO=[febff800-febfffff] Max Packet=[2048] [4294670.923000] SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB) [4294670.923000] SCSI device sda: drive cache: write back [4294670.932000] SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB) [4294670.932000] SCSI device sda: drive cache: write back [4294670.932000] sda: sda1 sda2 sda3 [4294670.956000] sd 0:0:0:0: Attached scsi disk sda [4294670.959000] sd 0:0:0:0: Attached scsi generic sg0 type 0 [4294671.094000] hda: Maxtor 4D060H3, ATA DISK drive [4294671.296000] usb 1-2: new low speed USB device using ohci_hcd and address 2 [4294671.663000] usb 1-4: new full speed USB device using ohci_hcd and address 3 [4294671.706000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [4294671.706000] Probing IDE interface ide1... [4294671.811000] usbcore: registered new driver hiddev [4294672.146000] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00023c009101f149] [4294672.378000] hdc: TSSTcorpCD/DVDW TS-H552U, ATAPI CD/DVD-ROM drive [4294672.990000] ide1 at 0x170-0x177,0x376 on irq 15 [4294672.995000] hda: max request size: 128KiB [4294673.002000] hda: 120069936 sectors (61475 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100) [4294673.002000] hda: cache flushes not supported [4294673.002000] hda: hda1 hda2 < hda5 hda6 > [4294673.044000] hdc: ATAPI 32X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33) [4294673.045000] Uniform CD-ROM driver Revision: 3.20 [4294681.822000] drivers/usb/input/hid-core.c: timeout initializing reports [4294681.822000] [4294681.822000] input: Logitech Inc. iFeel Mouse as /class/input/input1 [4294681.822000] input: USB HID v1.00 Mouse [Logitech Inc. iFeel Mouse ] on usb-0000:00:0b.0-2 [4294681.822000] usbcore: registered new driver usbhid [4294681.822000] drivers/usb/input/hid-core.c: v2.6:USB HID core driver [4294682.525000] usbcore: registered new driver usbkbd [4294682.525000] drivers/usb/input/usbkbd.c: :USB HID Boot Protocol keyboard driver [4294682.539000] usbcore: registered new driver usbserial [4294682.539000] drivers/usb/serial/usb-serial.c: USB Serial support registered for generic [4294682.540000] usbcore: registered new driver usbserial_generic [4294682.540000] drivers/usb/serial/usb-serial.c: USB Serial Driver core [4294682.816000] vesafb: framebuffer at 0xd8000000, mapped to 0xf8a00000, using 3750k, total 131072k [4294682.817000] vesafb: mode is 800x600x32, linelength=3200, pages=1 [4294682.817000] vesafb: protected mode interface info at c000:d6b0 [4294682.817000] vesafb: scrolling: redraw [4294682.817000] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [4294682.817000] vesafb: Mode is VGA compatible [4294682.817000] fb0: VESA VGA frame buffer device [4294682.839000] Console: switching to colour frame buffer device 100x37 [4294699.785000] Initializing USB Mass Storage driver... [4294699.785000] usbcore: registered new driver usb-storage [4294699.786000] USB Mass Storage support registered. [4294702.839000] floppy0: no floppy controllers found [4294703.863000] ide-floppy driver 0.99.newide [4294703.999000] sbp2: $Rev: 1306 $ Ben Collins [4294704.000000] ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1) [4294704.000000] ieee1394: sbp2: Try serialize_io=0 for better performance [4294704.245000] Intel ISA PCIC probe: not found. [4294708.671000] ISO 9660 Extensions: Microsoft Joliet Level 3 [4294708.735000] ISO 9660 Extensions: RRIP_1991A [4294726.422000] forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.48. [4294726.422000] PCI: Setting latency timer of device 0000:00:14.0 to 64 [4294726.934000] eth0: forcedeth.c: subsystem: 01462:7228 bound to 0000:00:14.0 [4294730.558000] floppy0: no floppy controllers found [4294730.783000] Intel ISA PCIC probe: not found. [4294736.048000] NET: Registered protocol family 17 [4294816.654000] floppy0: no floppy controllers found [4294816.877000] Intel ISA PCIC probe: not found. [4294822.627000] JFS: nTxBlock = 8192, nTxLock = 65536 [4294822.786000] SGI XFS with ACLs, security attributes, realtime, large block numbers, no debug enabled [4294822.786000] SGI XFS Quota Management subsystem [4294859.939000] Adding 1052248k swap on /dev/sda3. Priority:-1 extents:1 across:1052248k [4294898.494000] ata1: command 0x25 timeout, stat 0x50 host_stat 0x24 [4294928.500000] ata1: command 0x25 timeout, stat 0x50 host_stat 0x24 ------------------------ ps -ax: (setup hangs at this time) PID Uid VmSize Stat Command 1 root 448 S init 2 root SWN [ksoftirqd/0] 3 root SW [watchdog/0] 4 root SW< [events/0] 5 root SW< [khelper] 6 root SW< [kthread] 8 root SW< [kblockd/0] 90 root SW [pdflush] 92 root SW [kswapd0] 93 root SW< [aio/0] 687 root SW< [kseriod] 795 root 360 S < udevd --daemon 1484 root SW< [ata/0] 1485 root SW< [scsi_eh_0] 1486 root SW< [scsi_eh_1] 1511 root SW< [khubd] 1497 root SW [khpsbpkt] 1597 root SW [knodemgrd_0] 1833 root 356 S /sbin/syslogd -m 0 -O /var/log/syslog -S 1836 root 344 S /sbin/klogd -c 2 2108 root 472 S /bin/sh /sbin/debian-installer 2116 root 332 S /usr/bin/tail -f /var/log/messages 2119 root 336 S /usr/bin/tail -f /var/log/syslog 2122 root 668 R /bin/sh 2176 root 720 S /usr/bin/bterm -f /lib/unifont.bgf -l C.UTF-8 /lib/debian-installer/menu 2177 root 9900 S debconf -o d-i /usr/bin/main-menu 2178 root 572 S /usr/bin/main-menu 15370 root 616 S udpkg --configure --force-configure partman-base 15371 root 496 S /bin/sh /var/lib/dpkg/info/partman-base.postinst configure 15372 root 664 S /bin/sh /bin/partman 15769 root SW [jfsIO] 15770 root SW [jfsCommit] 15771 root SW [jfsSync] 15936 root SW< [xfslogd/0] 15937 root SW< [xfsdatad/0] 15938 root SW< [xfsbufd] 15979 root 852 S parted_server 23894 root 636 S /bin/sh /lib/partman/commit.d/50format_ext3 24624 root SW [pdflush] 24632 root 404 S log-output -t partman --pass-stdout /sbin/tune2fs -j /dev/sda1 24633 root 1356 D /sbin/tune2fs -j /dev/sda1 24642 root 540 R ps -ax ------------------------ lsmod: Module Size Used by nls_iso8859_1 4224 1 xfs 589656 0 exportfs 6272 1 xfs reiserfs 268016 0 jfs 195780 0 ext3 135688 0 jbd 58772 1 ext3 vfat 13440 1 fat 53020 1 vfat ext2 68360 0 af_packet 22920 2 forcedeth 23556 0 nls_cp437 5888 2 rsrc_nonstatic 13440 0 pcmcia_core 42640 1 rsrc_nonstatic sr_mod 16932 0 sbp2 24196 0 isofs 37688 1 ide_floppy 19328 0 ide_generic 1536 0 pdc202xx_new 9600 0 aec62xx 7936 0 alim15x3 12428 0 [permanent] atiixp 6800 0 cmd64x 12444 0 cs5520 5248 0 cs5530 5632 0 [permanent] cy82c693 4740 0 [permanent] hpt34x 5632 0 ns87415 4552 0 [permanent] opti621 4484 0 [permanent] pdc202xx_old 11392 0 piix 11012 0 rz1000 3200 0 sc1200 7552 0 [permanent] serverworks 9736 0 [permanent] siimage 12672 0 sis5513 17032 0 slc90e66 6016 0 [permanent] triflex 3968 0 [permanent] trm290 4868 0 via82cxxx 9988 0 [permanent] usb_storage 74176 0 fbcon 42784 68 tileblit 2816 1 fbcon font 8320 1 fbcon bitblit 6272 1 fbcon softcursor 2304 1 bitblit vesafb 8476 2 usbserial 31336 0 usbkbd 7040 0 processor 23360 0 ide_cd 33028 1 cdrom 38560 2 sr_mod,ide_cd ide_disk 17664 2 usbhid 38368 0 sg 37920 0 sd_mod 19984 3 amd74xx 15132 0 [permanent] generic 5124 0 ehci_hcd 32008 0 psmouse 36100 0 ohci_hcd 21892 0 usbcore 129668 7 usb_storage,usbserial,usbkbd,usbhid,ehci_hcd,ohci_hcd ohci1394 35124 0 ieee1394 299832 2 sbp2,ohci1394 sata_nv 9732 2 libata 61704 1 sata_nv scsi_mod 138984 6 sr_mod,sbp2,usb_storage,sg,sd_mod,libata evdev 9856 0 -- Dapper flight 5: Installation hangs at formating harddisk progress https://launchpad.net/malone/bugs/35389 From mdz at ubuntu.com Fri Apr 7 00:28:33 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Fri, 07 Apr 2006 00:28:33 -0000 Subject: [Bug 35389] Re: Dapper flight 5: Installation hangs at formating harddisk progress References: <20060317203252.26204.93137.malonedeb@gangotri.ubuntu.com> Message-ID: <20060407002833.24486.45596.launchpad@gangotri.ubuntu.com> ** Changed in: partman (Ubuntu) Sourcepackagename: partman => linux-source-2.6.15 Assignee: (unassigned) => Ben Collins -- Dapper flight 5: Installation hangs at formating harddisk progress https://launchpad.net/malone/bugs/35389 From peter at liedler.at Fri Apr 7 00:36:52 2006 From: peter at liedler.at (Peter Liedler) Date: Fri, 07 Apr 2006 00:36:52 -0000 Subject: [Bug 35436] network interfaces References: <20060318065353.12186.64301.malonedeb@gandwana.ubuntu.com> Message-ID: <20060407003652.24486.38966.launchpad@canonical@gangotri.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 base-installer (Ubuntu) Severity: Normal Priority: (none set) Assignee: Ben Collins Status: Unconfirmed Description: Trying to install flight-5 (problem occured on prvious versions too). The step where network interfaces should be detected doesn't work for me. Here is what I get on breezy, where the eth0 nic is detected on setup and the ra0 was installed manually: 0000:02:06.0 Network controller: RaLink Ralink RT2500 802.11 Cardbus Reference Card (rev 01) 0000:02:07.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host Controller (rev 80) 0000:02:08.0 Ethernet controller: Marvell Technology Group Ltd. Yukon Gigabit Ethernet 10/100/1000Base-T Adapter (rev 13) --> everything works fine on breezy. However during setup of dapper flight-5 it loads the floppy module (in the step where the nic should be detected) and then displays no nic found but firewire. Then I'm asked if I want to configure the firewire port for ethernet. Installing the module manually works. But why isn't the onboard ethernet controller detected? Public bug reported: Affects: linux-source-2.6.15 base-installer (Ubuntu) Severity: Normal Priority: (none set) Assignee: Ben Collins Status: Unconfirmed Description: Trying to install flight-5 (problem occured on prvious versions too). The step where network interfaces should be detected doesn't work for me. Here is what I get on breezy, where the eth0 nic is detected on setup and the ra0 was installed manually: 0000:02:06.0 Network controller: RaLink Ralink RT2500 802.11 Cardbus Reference Card (rev 01) 0000:02:07.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host Controller (rev 80) 0000:02:08.0 Ethernet controller: Marvell Technology Group Ltd. Yukon Gigabit Ethernet 10/100/1000Base-T Adapter (rev 13) --> everything works fine on breezy. However during setup of dapper flight-5 it loads the floppy module (in the step where the nic should be detected) and then displays no nic found but firewire. Then I'm asked if I want to configure the firewire port for ethernet. Installing the module manually works. But why isn't the onboard ethernet controller detected? -- network interfaces https://launchpad.net/malone/bugs/35436 From mdz at ubuntu.com Fri Apr 7 00:34:50 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Fri, 07 Apr 2006 00:34:50 -0000 Subject: [Bug 35445] Re: Laptop freeze on battery References: <20060318090356.26236.54158.malonedeb@gangotri.ubuntu.com> Message-ID: <20060407003450.24516.92180.launchpad@gangotri.ubuntu.com> *** This bug is a duplicate of bug 12483 *** ** This bug has been marked a duplicate of bug 12483 laptop-mode/IDE-APM hang on various laptops -- Laptop freeze on battery https://launchpad.net/malone/bugs/35445 From mdz at ubuntu.com Fri Apr 7 00:34:50 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Fri, 07 Apr 2006 00:34:50 -0000 Subject: [Bug 12483] Re: laptop-mode/IDE-APM hang on various laptops References: <20060113132548.21012.74332.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060407003450.24516.94709.launchpad@gangotri.ubuntu.com> ** Bug 35445 has been marked a duplicate of this bug -- laptop-mode/IDE-APM hang on various laptops https://launchpad.net/malone/bugs/12483 From mdz at ubuntu.com Fri Apr 7 00:36:52 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Fri, 07 Apr 2006 00:36:52 -0000 Subject: [Bug 35436] Re: network interfaces References: <20060318065353.12186.64301.malonedeb@gandwana.ubuntu.com> Message-ID: <20060407003652.24486.65297.launchpad@gangotri.ubuntu.com> ** Changed in: base-installer (Ubuntu) Sourcepackagename: base-installer => linux-source-2.6.15 Assignee: (unassigned) => Ben Collins ** Summary changed: - network interfaces + Marvell Yukon not detected -- Marvell Yukon not detected https://launchpad.net/malone/bugs/35436 From mdz at ubuntu.com Fri Apr 7 00:46:43 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Fri, 07 Apr 2006 00:46:43 -0000 Subject: [Bug 35492] Re: "Cannot enable port 1. Maybe the USB cable is bad?" with usb mouse on toshiba laptop References: <20060318190809.26236.8241.malonedeb@gangotri.ubuntu.com> Message-ID: <20060407004643.24516.64227.launchpad@gangotri.ubuntu.com> ** Changed in: linux-source-2.6.15 (Ubuntu) Assignee: (unassigned) => Ben Collins -- "Cannot enable port 1. Maybe the USB cable is bad?" with usb mouse on toshiba laptop https://launchpad.net/malone/bugs/35492 From crimsun at fungus.sh.nu Fri Apr 7 01:12:13 2006 From: crimsun at fungus.sh.nu (Daniel T. Chen) Date: Fri, 07 Apr 2006 01:12:13 -0000 Subject: [Bug 35397] Re: ICH6 ALC203 - sound bud mixer does not work References: <20060317211201.12186.68004.malonedeb@gandwana.ubuntu.com> Message-ID: <20060407011214.24486.86765.malone@gangotri.ubuntu.com> Peter, if changing the PCM volume works to control sound (but the Master one doesn't), then choose Volume Control's Preference to adjust the PCM volume. Your separate (and second) issue is different altogether and should be filed as a separate bug against the hotkey-setup package. ** Changed in: linux-source-2.6.15 (Ubuntu) Assignee: (unassigned) => Ben Collins Status: Unconfirmed => Needs Info ** Summary changed: - ICH6 ALC203 - sound bud mixer does not work + Master element for ALC203 fails to adjust volume -- Master element for ALC203 fails to adjust volume https://launchpad.net/malone/bugs/35397 From mdz at ubuntu.com Fri Apr 7 01:31:21 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Fri, 07 Apr 2006 01:31:21 -0000 Subject: [Bug 35575] Re: Missing dependency's References: <20060319112347.26204.81169.malonedeb@gangotri.ubuntu.com> Message-ID: <20060407013121.32313.7977.malone@gandwana.ubuntu.com> Package: linux-k7 Priority: optional Section: restricted/base Installed-Size: 52 Maintainer: Ubuntu Kernel Team Architecture: i386 Source: linux-meta Version: 2.6.15.19 Depends: linux-image-k7, linux-restricted-modules-k7 The dependencies are correct; please check that you do in fact have the linux-k7 package installed, and not only linux-image-k7. ** Changed in: linux-meta linux-k7 (Ubuntu) Status: Unconfirmed => Needs Info -- Missing dependency's https://launchpad.net/malone/bugs/35575 From gioppo at gmail.com Fri Apr 7 01:44:28 2006 From: gioppo at gmail.com (Gabriele Postorino) Date: Fri, 07 Apr 2006 01:44:28 -0000 Subject: [Bug 33714] Re: r818x not working References: <20060304162930.17525.6725.malonedeb@gangotri.ubuntu.com> Message-ID: <20060407014428.32313.98665.malone@gandwana.ubuntu.com> lspci output referring to my wireless card 0000:00:09.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8180L 802.11b MAC (rev 20) lspci -n output 0000:00:09.0 0200: 10ec:8180 (rev 20) -- r818x not working https://launchpad.net/malone/bugs/33714 From ben.collins at ubuntu.com Fri Apr 7 03:27:56 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Fri, 07 Apr 2006 03:27:56 -0000 Subject: [Bug 37182] Re: 2.6.15.* kernels fail to boot on amd machine with nvidia chipset References: <20060329155808.7863.44273.malonedeb@gangotri.ubuntu.com> Message-ID: <20060407032757.24486.67343.malone@gangotri.ubuntu.com> Fixed in -20.30 ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Unconfirmed => Fix Released -- 2.6.15.* kernels fail to boot on amd machine with nvidia chipset https://launchpad.net/malone/bugs/37182 From autocrosser at macdialup.com Fri Apr 7 05:14:57 2006 From: autocrosser at macdialup.com (Dean Loros) Date: Fri, 07 Apr 2006 05:14:57 -0000 Subject: [Bug 29420] Current 15-20-smp kernel for PPC (Mac) References: <20060123071446.16602.91711.malonedeb@gandwana.ubuntu.com> Message-ID: <4435F551.1050306@macdialup.com> I have tried the new kernel & still have the problems listed in bug 29420. Time was rapidly changing from current date/time to either May 20 at 6:20 am or July 17 at 7:10am--Gnome-panel "worked" with this for about 15 minutes & then stopped responding--System "froze" within seconds of panel non-operation & I had to hard reboot. -- Strange clock behaviour on powerpc-smp https://launchpad.net/malone/bugs/29420 From dn at offspringnet.net Fri Apr 7 05:32:53 2006 From: dn at offspringnet.net (grendel970) Date: Fri, 07 Apr 2006 05:32:53 -0000 Subject: [Bug 37881] Re: Parallel port printer not working References: <20060403150937.23108.72392.malonedeb@gandwana.ubuntu.com> Message-ID: <20060407053253.24486.11321.malone@gangotri.ubuntu.com> Actually it turns out the problem was somewhere in cups or the filters because with the recent cups updates the printer now works, and I tried on on 2.6.15-19 with broken acpi pnp and it still worked. Nice job ubuntu guys! -- Parallel port printer not working https://launchpad.net/malone/bugs/37881 From robhuls at gmail.com Fri Apr 7 07:12:26 2006 From: robhuls at gmail.com (Armitage) Date: Fri, 07 Apr 2006 07:12:26 -0000 Subject: [Bug 30153] Re: IBM X31 freeze under X, shortly after boot References: <20060131145310.3946.53937.malonedeb@gangotri.ubuntu.com> Message-ID: <20060407071226.32233.85690.malone@gandwana.ubuntu.com> I seem to have similar problems. The system sometimes boots and sometimes it doesn't. When it doesn't, I get the following messages: hda: timeout waiting for dma hda: drive not ready for command hdb: timeout waiting for dma hdb: drive not ready for command If I wait for a long time it will go on booting, but it never seems to reach login, the last service it start is ssh. Solution is 'simple'. I push the on/off button for five seconds, switch the system back on, second boot always seems to be succesful. In the syslog file I see, for the first (failed) boot: hda: dma_intr: status=0xd0 { Busy } hda: DMA disabled The same for hdb. For the succesfull boot, I still have messages: Apr 7 08:26:48 localhost kernel: [4294686.931000] hda: dma_intr: status=0x58 { DriveReady SeekComplete DataRequest } Apr 7 08:26:48 localhost kernel: [4294707.214000] hda: dma_timer_expiry: dma status == 0x60 Apr 7 08:26:48 localhost kernel: [4294707.214000] hda: DMA timeout retry Apr 7 08:26:48 localhost kernel: [4294707.214000] hda: timeout waiting for DMA But once the system runs, there seem to be no more errors in the syslog file. Could be related a bad cable maybe, but under windows I have no problems (or just don't see them?), and the problems arose around the time I upgraded from Breezy to Dapper. Kernel: 2.6.15-20-k7 #1 SMP PREEMPT (but problems were also there in 19,18) VIA KT400 chipset: P_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci0000:00:11.1 -- IBM X31 freeze under X, shortly after boot https://launchpad.net/malone/bugs/30153 From tenshu at gmail.com Fri Apr 7 07:23:17 2006 From: tenshu at gmail.com (tenshu) Date: Fri, 07 Apr 2006 07:23:17 -0000 Subject: [Bug 28464] Re: Include OSS driver for Ralink wireless chipset? References: <20060113174232.6087.20307.malonedeb@gangotri.ubuntu.com> Message-ID: <20060407072317.24516.20789.malone@gangotri.ubuntu.com> think it should be a great thing. It very frustrating to reboot under windows to have access to internet... -- Include OSS driver for Ralink wireless chipset? https://launchpad.net/malone/bugs/28464 From ach at mpe.mpg.de Fri Apr 7 07:28:34 2006 From: ach at mpe.mpg.de (allee) Date: Fri, 07 Apr 2006 07:28:34 -0000 Subject: [Bug 38555] usb mouse not properly initialized References: <20060407072834.24486.931.malonedeb@gangotri.ubuntu.com> Message-ID: <20060407072834.24486.931.malonedeb@gangotri.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 linux-image-2.6.15-20-686 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: When I plug in my USB mouse in a Dell D600 laptop running Kubuntu/Dapper the xserver-xorg-driver-ati (6.5.7.3-0ubuntu4) the USB mouse is not working (internal touchpad, and mousestick are okay). Alt-F1,Alt-F8 fixes the problem. Reason I file this bug against kernel and not xorg driver is, that when I unplug and plug mouse in again, cat /dev/input/mouse2 does not give any output. So it looks to me the kernel isn't activating the mouse. Further I found: unplug, plug mouse, cat /dev/input/mouse2, move mouse -> no output. Alt-F1, Alt-f8, mouse mouse still no output and xserver does not use the mouse but when I abort then cat /dev/input/mouse2, then Alt-F1, Alt-F8, then cat /dev/input/mouse2 again, I get output and Xserver uses the mouse. I normally use a bluetooth mouse without problems but I've forgot it at work today. Therefore I can't tell if this bug is a regression of -20 kernel installed yesterday or if this bug with the USB mouse exists for a longer time. Next Monday at work I can try what's the case. Achim -- usb mouse not properly initialized https://launchpad.net/malone/bugs/38555 From casualprogrammer at yahoo.com Fri Apr 7 07:45:28 2006 From: casualprogrammer at yahoo.com (casualprogrammer) Date: Fri, 07 Apr 2006 07:45:28 -0000 Subject: [Bug 38555] Re: usb mouse not properly initialized References: <20060407072834.24486.931.malonedeb@gangotri.ubuntu.com> Message-ID: <20060407074528.24486.843.launchpad@gangotri.ubuntu.com> ** Bug 37366 has been marked a duplicate of this bug -- usb mouse not properly initialized https://launchpad.net/malone/bugs/38555 From juho.vuori at helsinki.fi Fri Apr 7 08:07:34 2006 From: juho.vuori at helsinki.fi (Juho Vuori) Date: Fri, 07 Apr 2006 08:07:34 -0000 Subject: [Bug 38558] nx6110 (celeron) fails to resume after suspend to ram References: <20060407080734.24516.51877.malonedeb@gangotri.ubuntu.com> Message-ID: <20060407080734.24516.51877.malonedeb@gangotri.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: Celeron version of HP nx6110 laptop fails to resume after suspend to RAM. It does work sometimes but say every other time the computer hangs (display stays blank and capslock&numlock leds start blinking). Also sometimes the machine resumes and works for a while, but eventually the kernel panics. It has been reported that pentium M version of nx6110 works fine, but the chipset of the celeron version is different and this porobably explains it. I've tried this with two different motherboards of the same machine and also with gentoo distribution, so it must be a kernel thing. The same has happened with many different versions of linux-2.6.x. -- nx6110 (celeron) fails to resume after suspend to ram https://launchpad.net/malone/bugs/38558 From olive at deep-ocean.net Fri Apr 7 08:08:00 2006 From: olive at deep-ocean.net (Olivier Cortes) Date: Fri, 07 Apr 2006 08:08:00 -0000 Subject: [Bug 30153] Re: [Bug 30153] Re: IBM X31 freeze under X, shortly after boot References: <20060131145310.3946.53937.malonedeb@gangotri.ubuntu.com> <20060407071226.32233.85690.malone@gandwana.ubuntu.com> Message-ID: <44361DE0.9050808@deep-ocean.net> -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Sorry, i don't seem this can be related. I experienced *no* DMA problems at all under ubuntu. Just a freeze which generate corrupted data. please run smartctl tests (package "smartmontools") to see if your disk is healthy. regards, Olivier Armitage a écrit : > I seem to have similar problems. The system sometimes boots and sometimes it doesn't. When it doesn't, I get the following messages: > hda: timeout waiting for dma > hda: drive not ready for command > hdb: timeout waiting for dma > hdb: drive not ready for command > If I wait for a long time it will go on booting, but it never seems to reach login, the last service it start is ssh. Solution is 'simple'. I push the on/off button for five seconds, switch the system back on, second boot always seems to be succesful. In the syslog file I see, for the first (failed) boot: > hda: dma_intr: status=0xd0 { Busy } > hda: DMA disabled > The same for hdb. For the succesfull boot, I still have messages: > Apr 7 08:26:48 localhost kernel: [4294686.931000] hda: dma_intr: status=0x58 { DriveReady SeekComplete DataRequest } > Apr 7 08:26:48 localhost kernel: [4294707.214000] hda: dma_timer_expiry: dma status == 0x60 > Apr 7 08:26:48 localhost kernel: [4294707.214000] hda: DMA timeout retry > Apr 7 08:26:48 localhost kernel: [4294707.214000] hda: timeout waiting for DMA > > But once the system runs, there seem to be no more errors in the syslog file. Could be related a bad cable maybe, but under windows I have no problems (or just don't see them?), and the problems arose around the time I upgraded from Breezy to Dapper. > > Kernel: 2.6.15-20-k7 #1 SMP PREEMPT (but problems were also there in 19,18) > VIA KT400 chipset: P_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci0000:00:11.1 > > > > -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.2.2 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFENh3g6FdkvuQNMIwRAvaDAJ95cRfC0gIyK9O6aRMuRkC2Z30cXgCfSDSu 18/HTe4MoTq0ah7H15BLDEo= =IiDw -----END PGP SIGNATURE----- -- IBM X31 freeze under X, shortly after boot https://launchpad.net/malone/bugs/30153 From dennis at kaarsemaker.net Fri Apr 7 08:13:11 2006 From: dennis at kaarsemaker.net (Dennis Kaarsemaker) Date: Fri, 07 Apr 2006 08:13:11 -0000 Subject: [Bug 35703] Re: [Bug 35703] Fixed :) References: <20060320113114.8195.71315.malonedeb@gandwana.ubuntu.com> <20060405195441.32313.98476.malone@gandwana.ubuntu.com> Message-ID: <1144397591.9686.93.camel@mirage> status FixReleased The new kernel will be on the new daily isos :) ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Fix Committed => Fix Released -- Alternative firmware needed for LG LW5400N wifi card based on TI acx111 https://launchpad.net/malone/bugs/35703 From juho.vuori at helsinki.fi Fri Apr 7 08:23:49 2006 From: juho.vuori at helsinki.fi (Juho Vuori) Date: Fri, 07 Apr 2006 08:23:49 -0000 Subject: [Bug 38563] bcm43xx module does not work on HP nx6110 References: <20060407082349.32313.19836.malonedeb@gandwana.ubuntu.com> Message-ID: <20060407082349.32313.19836.malonedeb@gandwana.ubuntu.com> Public bug reported: Affects: linux-meta linux-source (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: The broadcom WLAN native driver bcm43xx does not work on HP nx6100 laptop. The adapter shows on iwconfig, but it is unable to connect to a AP. Also the WLAN-led on the laptop never gets on. The adapter works fine with ndiswrapper. This caused problems installing dapper flight-5 over wlan. -- bcm43xx module does not work on HP nx6110 https://launchpad.net/malone/bugs/38563 From jjchico at dte.us.es Fri Apr 7 08:19:17 2006 From: jjchico at dte.us.es (Jorge Juan) Date: Fri, 07 Apr 2006 08:19:17 -0000 Subject: [Bug 38562] ich6 + sata suspend/hibernate problem References: <20060407081917.32313.78119.malonedeb@gandwana.ubuntu.com> Message-ID: <20060407081917.32313.78119.malonedeb@gandwana.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 linux-image-2.6.15-20-686 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: My laptop, Fujitsu-Siemens S7020 Supreme does not suspend or hibernate. After issuing hibernate action (both GUI or pmi command) the screen turns off, disk activity stops but the laptop does not power off. After reseting, the system boots in a regular way. Manually removing network and pcmcia modules before hibernation (including ieee80211 and ieee80211_crypt) does not help. ACPI_SLEEP_MODE=standby in /etc/default/acpi-support does not help either. Some links report working suspend/hibernate in this laptop with a 2.6.16 kernel (it is in French): http://community.inelis.fr/documentations/laptop_FS_s7020/ Also, a probably related e-mail list thread is at: http://www.ussg.iu.edu/hypermail/linux/kernel/0602.2/1907.html regarding some suspend issues with sata controllers. I am using current dapper, updated daily. Installed from dapper Flight-6 CD. Full details are attached next. ** Attachment added: "kernel version" http://librarian.launchpad.net/1966627/data.txt ** Attachment added: "lspci" http://librarian.launchpad.net/1966628/lspci.txt ** Attachment added: "lsmod" http://librarian.launchpad.net/1966629/lsmod.txt ** Attachment added: "dmesg" http://librarian.launchpad.net/1966630/syslog -- ich6 + sata suspend/hibernate problem https://launchpad.net/malone/bugs/38562 From 84yelo3 at gmail.com Fri Apr 7 08:23:33 2006 From: 84yelo3 at gmail.com (=?utf-8?q?Nicol=C3=B2_Chieffo?=) Date: Fri, 07 Apr 2006 08:23:33 -0000 Subject: [Bug 38423] Re: [Bug 38423] Re: suspend-resume-hibernate-resume fails something related to temperature References: <20060406142523.32233.80007.malonedeb@gandwana.ubuntu.com> <20060406225953.24516.51491.malone@gangotri.ubuntu.com> Message-ID: <641322f90604070123u7f5521easd16ca9a0ee72e919@mail.gmail.com> yes, it's dapper and I'm using linux-image-2.6.15-20-686, unfortunately my laptop manufacturer (asus) doesn't seem interested to develop any newer bios... I can try to rollback to latest stable bios, but I need msdos to run the bios updater which can rollback and I don't know how to obtain it... anyway brezy could suspend with no problems -- suspend-resume-hibernate-resume fails something related to temperature https://launchpad.net/malone/bugs/38423 From dennis at kaarsemaker.net Fri Apr 7 08:34:04 2006 From: dennis at kaarsemaker.net (Dennis Kaarsemaker) Date: Fri, 07 Apr 2006 08:34:04 -0000 Subject: [Bug 38563] Re: [Bug 38563] bcm43xx module does not work on HP nx6110 References: <20060407082349.32313.19836.malonedeb@gandwana.ubuntu.com> Message-ID: <1144398844.9686.102.camel@mirage> Did you install the firmware yourself? Ubuntu does not have permisison to distribute the firmware. -- bcm43xx module does not work on HP nx6110 https://launchpad.net/malone/bugs/38563 From saua at gmx.net Fri Apr 7 08:46:24 2006 From: saua at gmx.net (rentar) Date: Fri, 07 Apr 2006 08:46:24 -0000 Subject: [Bug 38568] 2.6.15-20 broke Prism GT WLAN Card References: <20060407084624.24486.68190.malonedeb@gangotri.ubuntu.com> Message-ID: <20060407084624.24486.68190.malonedeb@gangotri.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: I've been using Dapper Drake (installed from Flight CD 6, updated regularly). My Netgear PCMCIA WLAN card worked ok, until I've updated the kernel to linux-image-2.6.15-20 (before I used 2.6.15-19). It didn't detect my network-card. dmesg revealed that it tried to load the firmware "isl3886". This firmware is not present in -19 or -20. When booting the same system with -19 it just logs that it successfully loaded the firmware (not telling me which one). Checking the changelog I found the following entry: * prism54: Via mjg59: - Load firmware before bring up interface. - Add prism54 softmac driver. That sure looks like it's related. lspci output: 0000:02:00.0 Network controller: Intersil Corporation Intersil ISL3890 [Prism GT/Prism Duette] (rev 01) -- 2.6.15-20 broke Prism GT WLAN Card https://launchpad.net/malone/bugs/38568 From herzi at gnome-de.org Fri Apr 7 08:48:32 2006 From: herzi at gnome-de.org (Sven Herzberg) Date: Fri, 07 Apr 2006 08:48:32 -0000 Subject: [Bug 38220] Re: Xorg [dri] i915 kernel module is 1.1 References: <20060405164018.24486.5077.malonedeb@gangotri.ubuntu.com> Message-ID: <20060407084832.24516.84983.malone@gangotri.ubuntu.com> It just depends on the latest version of the dri project. -- Xorg [dri] i915 kernel module is 1.1 https://launchpad.net/malone/bugs/38220 From juho.vuori at helsinki.fi Fri Apr 7 08:56:03 2006 From: juho.vuori at helsinki.fi (Juho Vuori) Date: Fri, 07 Apr 2006 08:56:03 -0000 Subject: [Bug 38563] Re: [Bug 38563] Re: [Bug 38563] bcm43xx module does not work on HP nx6110 References: <20060407082349.32313.19836.malonedeb@gandwana.ubuntu.com> <1144398844.9686.102.camel@mirage> Message-ID: <44362923.7020802@helsinki.fi> Aha, no, I didn't do anything about it, so this is not a bug in the end. However, I'd say this is a minor installer issue. It would be a good idea to inform the user about this. Juho Dennis Kaarsemaker wrote: > Did you install the firmware yourself? Ubuntu does not have permisison > to distribute the firmware. > > -- bcm43xx module does not work on HP nx6110 https://launchpad.net/malone/bugs/38563 From olive at deep-ocean.net Fri Apr 7 09:09:04 2006 From: olive at deep-ocean.net (Olivier Cortes) Date: Fri, 07 Apr 2006 09:09:04 -0000 Subject: [Bug 30153] Re: [Bug 30153] IBM X31 freeze under X, shortly after boot References: <20060131145310.3946.53937.malonedeb@gangotri.ubuntu.com> <20060307142114.26236.46255.malone@gangotri.ubuntu.com> Message-ID: <44362C30.5030704@deep-ocean.net> -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Cinquero a écrit : > Public bug report changed: > https://launchpad.net/malone/bugs/30153 > > Comment: > Have you tried to disable kernel preemption and GLX usage? no. what is the kernel "append" command to disable preemtion ? For GLX i know how to do that in xorg.conf. thanks, olivier -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.2.2 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFENiww6FdkvuQNMIwRAr7NAJ9VSd1qiDIaLJ8RQmnA5TTg0ccjdwCfQSNw DhiMkFvCeDAiFA/SrFXCg0s= =RSQ6 -----END PGP SIGNATURE----- -- IBM X31 freeze under X, shortly after boot https://launchpad.net/malone/bugs/30153 From sergiollanos at hotmail.com Fri Apr 7 09:36:10 2006 From: sergiollanos at hotmail.com (tioantonio) Date: Fri, 07 Apr 2006 09:36:10 -0000 Subject: [Bug 36462] optical mouse problem References: <20060324175400.6279.66012.malonedeb@gandwana.ubuntu.com> Message-ID: <20060407093610.24516.59732.launchpad@canonical@gangotri.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Assignee: Ubuntu Kernel Team Status: Needs Info Description: problems with my optical mouse "soyntec", don't work fine, go to de up- right corner and don't move more, the butons works but.... Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Assignee: Ubuntu Kernel Team Status: Needs Info Description: problems with my optical mouse "soyntec", don't work fine, go to de up- right corner and don't move more, the butons works but.... -- optical mouse problem https://launchpad.net/malone/bugs/36462 From fabbione at ubuntu.com Fri Apr 7 09:36:09 2006 From: fabbione at ubuntu.com (Fabio Massimo Di Nitto) Date: Fri, 07 Apr 2006 09:36:09 -0000 Subject: [Bug 36462] Re: optical mouse problem References: <20060324175400.6279.66012.malonedeb@gandwana.ubuntu.com> Message-ID: <20060407093610.24516.67363.malone@gangotri.ubuntu.com> Ben is there any obvious change in the input layer that might fix this? ** Changed in: xorg (Ubuntu) Sourcepackagename: xorg => linux-source-2.6.15 Severity: Major => Normal Assignee: (unassigned) => Ubuntu Kernel Team -- optical mouse problem https://launchpad.net/malone/bugs/36462 From teppic74 at hotmail.com Fri Apr 7 10:01:47 2006 From: teppic74 at hotmail.com (Barry Shilliday) Date: Fri, 07 Apr 2006 10:01:47 -0000 Subject: [Bug 38218] Re: sky2 module update broken References: <20060405161344.32313.90376.malonedeb@gandwana.ubuntu.com> Message-ID: <20060407100147.24516.88698.launchpad@gangotri.ubuntu.com> ** Attachment added: "dmesg output" http://librarian.launchpad.net/1966685/dmesg.txt -- sky2 module update broken https://launchpad.net/malone/bugs/38218 From casualprogrammer at yahoo.com Fri Apr 7 10:02:43 2006 From: casualprogrammer at yahoo.com (casualprogrammer) Date: Fri, 07 Apr 2006 10:02:43 -0000 Subject: [Bug 37366] Re: The mouse is detected, but refuses to work References: <20060330173732.5415.12100.malonedeb@gangotri.ubuntu.com> Message-ID: <20060407100243.24516.21990.malone@gangotri.ubuntu.com> *** This bug is a duplicate of bug 36339 *** Actual (reproducible) state is Ubuntu 6.06 "Dapper Drake" Development Branch \n \l 1. boot system 2. plug in usb mouse 3. if it does not work "$ sudo rmmod usbhid" 4. without removing the mouse "$ sudo modprobe usbhid" 5. the mouse works. ** This bug has been marked a duplicate of bug 36339 USB mouse does not work if usbhid loaded before plugging in -- The mouse is detected, but refuses to work https://launchpad.net/malone/bugs/37366 From kalium at gmx.de Fri Apr 7 10:04:25 2006 From: kalium at gmx.de (Cinquero) Date: Fri, 07 Apr 2006 10:04:25 -0000 Subject: [Bug 30153] Re: IBM X31 freeze under X, shortly after boot References: <20060131145310.3946.53937.malonedeb@gangotri.ubuntu.com> Message-ID: <20060407100425.32233.83571.malone@gandwana.ubuntu.com> You have to recompile the kernel. It worked for me once, but instabilities have arisen just recently again... we really need hardware recommendations for buying. Argh. -- IBM X31 freeze under X, shortly after boot https://launchpad.net/malone/bugs/30153 From casualprogrammer at yahoo.com Fri Apr 7 10:06:07 2006 From: casualprogrammer at yahoo.com (casualprogrammer) Date: Fri, 07 Apr 2006 10:06:07 -0000 Subject: [Bug 36339] Re: USB mouse does not work if usbhid loaded before plugging in References: <20060324035730.5352.52525.malonedeb@gangotri.ubuntu.com> Message-ID: <20060407100607.24486.99402.malone@gangotri.ubuntu.com> #37366, 37059, 38555 seem to address same issue. ** Bug 37366 has been marked a duplicate of this bug -- USB mouse does not work if usbhid loaded before plugging in https://launchpad.net/malone/bugs/36339 From romnes at stud.ntnu.no Fri Apr 7 10:32:45 2006 From: romnes at stud.ntnu.no (Skrot) Date: Fri, 07 Apr 2006 10:32:45 -0000 Subject: [Bug 34870] Re: ipw2200 repeatedly crashes. References: <20060314104909.30082.87848.malonedeb@gandwana.ubuntu.com> Message-ID: <20060407103245.32233.5050.malone@gandwana.ubuntu.com> I'm experiencing this bug also. I've got a Acer Travelmate 3004TWMi, running kubuntu dapper flight 6 with a self compiled kernel based on linux-source 2.6.15-20.30. I've also compiled ipw2200 from version 1.1.1, using firmware 3.0 and ieee80211-driver version 1.1.12. The problem has lasted about 2 months now, with different versions of ipw2200 driver, kernel-source, firmware, ieee80211 etc. It [the bug] doesn't seem to be version bound. Here are some logs and my kernel configuration: http://www.idi.ntnu.no/~romnes/kubuntu/ kern.log syslog messages dmideocde.log kernel.conf Hope they help, though I've been unable to find any valuable information in the log files relevant to the freezes. The freezes occur almost randomly. Often as soon as I'm connected and I've got DHCP-info. Also, some times it does not freeze at all. I don't use any form of crypto on my access point. Please let me know if further information is needed, I'd be happy to oblige. :) -- ipw2200 repeatedly crashes. https://launchpad.net/malone/bugs/34870 From teppic74 at hotmail.com Fri Apr 7 10:39:57 2006 From: teppic74 at hotmail.com (Barry Shilliday) Date: Fri, 07 Apr 2006 10:39:57 -0000 Subject: [Bug 38218] Re: sky2 module update broken References: <20060405161344.32313.90376.malonedeb@gandwana.ubuntu.com> Message-ID: <20060407103957.24486.79250.launchpad@gangotri.ubuntu.com> ** Attachment added: "Some more information" http://librarian.launchpad.net/1966706/extra.txt -- sky2 module update broken https://launchpad.net/malone/bugs/38218 From cyrilb856 at gmail.com Fri Apr 7 10:41:50 2006 From: cyrilb856 at gmail.com (marseillai) Date: Fri, 07 Apr 2006 10:41:50 -0000 Subject: [Bug 37589] Re: cannot mount usb hard drive when it's in sleep mode References: <20060401130538.23707.51582.malonedeb@gandwana.ubuntu.com> Message-ID: <20060407104150.24486.40412.malone@gangotri.ubuntu.com> what can i do know? is there anything to help or only wait? -- cannot mount usb hard drive when it's in sleep mode https://launchpad.net/malone/bugs/37589 From ccooke-ubuntubugs at gkhs.net Fri Apr 7 10:40:35 2006 From: ccooke-ubuntubugs at gkhs.net (C. Cooke) Date: Fri, 07 Apr 2006 10:40:35 -0000 Subject: [Bug 37287] Re: No sound on Inspiron 9400 with Dapper References: <20060330074302.7863.60106.malonedeb@gangotri.ubuntu.com> Message-ID: <20060407104035.24516.71819.malone@gangotri.ubuntu.com> I have the same problem with my Sony Vaio VGN-A397XP. This one uses the hda driver on an ICH6 chipset: 0000:00:1b.0 0403: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller (rev 04) The update to 2.6.15-20 does *Not* fix the problem here. 2.6.15-18 works correctly, 2.6.15-19 does not. -- No sound on Inspiron 9400 with Dapper https://launchpad.net/malone/bugs/37287 From kamping_kaiser at internode.on.net Fri Apr 7 11:12:40 2006 From: kamping_kaiser at internode.on.net (KarlGoetz) Date: Fri, 07 Apr 2006 11:12:40 -0000 Subject: [Bug 38587] Compaq Armada E500 doesnt resume properly in Breezy References: <20060407111240.24486.39164.malonedeb@gangotri.ubuntu.com> Message-ID: <20060407111240.24486.39164.malonedeb@gangotri.ubuntu.com> Public bug reported: Affects: linux-source-2.6.12 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: The Compaq armada E500 series laptops dont resume properly aproximately 1 in 10 times. The fix we found at ITShare is as follows: Edit `/etc/default/acpi-support` Uncomment 'ACPI_SLEEP=true' Edit `/boot/grub/menu.lst` find `2.6.12-[9,10]-386` Append `acpi_sleep=s3_bios` to the beginning of the kernel line reboot I dont know if this is still required in dapper (i will try asap though), but the resume problem seems to happen on the 12-10 breezy kernels as well. kk -- Compaq Armada E500 doesnt resume properly in Breezy https://launchpad.net/malone/bugs/38587 From mark at prevented.net Fri Apr 7 11:20:17 2006 From: mark at prevented.net (Mark Schouten) Date: Fri, 07 Apr 2006 11:20:17 -0000 Subject: [Bug 35575] Re: Missing dependency's References: <20060319112347.26204.81169.malonedeb@gangotri.ubuntu.com> Message-ID: <20060407112017.32233.40830.malone@gandwana.ubuntu.com> You're right. I did not have that package installed. Thanks, AFAIC, this bug can be closed. :) -- Missing dependency's https://launchpad.net/malone/bugs/35575 From hiro at dusk.org Fri Apr 7 11:56:33 2006 From: hiro at dusk.org (Adam Wiggins) Date: Fri, 07 Apr 2006 11:56:33 -0000 Subject: [Bug 38589] Dapper flight6: availble kernels selection References: <20060407115633.24516.55871.malonedeb@gangotri.ubuntu.com> Message-ID: <20060407115633.24516.55871.malonedeb@gangotri.ubuntu.com> Public bug reported: Affects: linux-meta linux-386 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: When installing Dapper i386 flight6 I was promoted to select an "Available kernel" as follows: linux-386 linux-image-386 linux-image-2.6.15-19-386 I assume these are all just aliases of the same thing. I selected the second one on the list and that worked fine. But, this seems like the sort of thing that would stop any newbie dead in their tracks as the sort of scary question they don't want to answer. :) There was nothing special about the machine, just an ordinary cheapo Athlon workstation. -- Dapper flight6: availble kernels selection https://launchpad.net/malone/bugs/38589 From ben.collins at ubuntu.com Fri Apr 7 12:16:32 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Fri, 07 Apr 2006 12:16:32 -0000 Subject: [Bug 38568] Re: 2.6.15-20 broke Prism GT WLAN Card References: <20060407084624.24486.68190.malonedeb@gangotri.ubuntu.com> Message-ID: <20060407121632.32313.99156.launchpad@gandwana.ubuntu.com> *** This bug is a duplicate of bug 38278 *** ** This bug has been marked a duplicate of bug 38278 wifi card don't work. isl3886 is required but not installed -- 2.6.15-20 broke Prism GT WLAN Card https://launchpad.net/malone/bugs/38568 From ben.collins at ubuntu.com Fri Apr 7 12:16:32 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Fri, 07 Apr 2006 12:16:32 -0000 Subject: [Bug 38278] Re: wifi card don't work. isl3886 is required but not installed References: <20060405203926.24486.7083.malonedeb@gangotri.ubuntu.com> Message-ID: <20060407121632.32313.96630.launchpad@gandwana.ubuntu.com> ** Bug 38568 has been marked a duplicate of this bug -- wifi card don't work. isl3886 is required but not installed https://launchpad.net/malone/bugs/38278 From ben.collins at ubuntu.com Fri Apr 7 12:24:33 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Fri, 07 Apr 2006 12:24:33 -0000 Subject: [Bug 38100] Re: sky2.ko not included in nic-modules udeb References: <20060404222144.14649.39331.malonedeb@gandwana.ubuntu.com> Message-ID: <20060407122434.24486.55447.launchpad@gangotri.ubuntu.com> ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Unconfirmed => Fix Released -- sky2.ko not included in nic-modules udeb https://launchpad.net/malone/bugs/38100 From ben.collins at ubuntu.com Fri Apr 7 12:23:51 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Fri, 07 Apr 2006 12:23:51 -0000 Subject: [Bug 38000] Re: xserver-xorg-driver-ati needs radeon kernel module v1.23, finds 1.19 only References: <20060404100743.23108.60998.malonedeb@gandwana.ubuntu.com> Message-ID: <20060407122352.24516.99859.malone@gangotri.ubuntu.com> This is just a warning, plus it's not something I can "fix" in the kernel. Basically the driver can support a newer version of the radeon kernel drm, but that driver is not available in our kernel yet (and wont be for dapper). This will fix itelf naturally in dapper+1 when we move to a newer kernel. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Unconfirmed => Rejected -- xserver-xorg-driver-ati needs radeon kernel module v1.23, finds 1.19 only https://launchpad.net/malone/bugs/38000 From info at dragonfly-computers.nl Fri Apr 7 12:24:56 2006 From: info at dragonfly-computers.nl (Michiel Dijcks) Date: Fri, 07 Apr 2006 12:24:56 -0000 Subject: [Bug 34752] Re: breezy->dapper wifi lost: signal power to 0 References: <20060313122743.17044.67675.malonedeb@gangotri.ubuntu.com> Message-ID: <20060407122456.24486.89451.malone@gangotri.ubuntu.com> Extra info: When tcpdumping, broadcast packets from the rest of the network are received, but when trying to associate with the ap no packeges a sent/ received. -- breezy->dapper wifi lost: signal power to 0 https://launchpad.net/malone/bugs/34752 From ben.collins at ubuntu.com Fri Apr 7 12:26:24 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Fri, 07 Apr 2006 12:26:24 -0000 Subject: [Bug 37975] Re: no sound in my laptop References: <20060404060657.23082.46696.malonedeb@gandwana.ubuntu.com> Message-ID: <20060407122624.32313.47009.malone@gandwana.ubuntu.com> More information, like what kernel and version of ubuntu you are using, is needed for this bug report. Also, please attach the output of dmesg. Do not paste large output (like the lspci output you did before) in comments. Attach the files uncompressed to the bug report. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Unconfirmed => Needs Info -- no sound in my laptop https://launchpad.net/malone/bugs/37975 From ben.collins at ubuntu.com Fri Apr 7 12:29:29 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Fri, 07 Apr 2006 12:29:29 -0000 Subject: [Bug 37434] Re: hotplug trouble with USB CD-ROM References: <20060331051019.5415.66332.malonedeb@gangotri.ubuntu.com> Message-ID: <20060407122929.32233.43673.malone@gandwana.ubuntu.com> Kernel can't fail much faster. The scsi and USB subsystems have a natural timeout for all devices (USB falls under the scsi subsystem), just in case things are just a little quirky, but not seriously broken. The failure actually happens very quickly, but the scsi subsystem will retry a few times before giving up. We don't want to change this behavior as it can cause devices to fail to easily in other cirumstances. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Unconfirmed => Rejected -- hotplug trouble with USB CD-ROM https://launchpad.net/malone/bugs/37434 From ben.collins at ubuntu.com Fri Apr 7 12:31:59 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Fri, 07 Apr 2006 12:31:59 -0000 Subject: [Bug 37884] Re: Critical temperature reached (255 C) very soon at boot when using i810 References: <20060403152126.23108.73899.malonedeb@gandwana.ubuntu.com> Message-ID: <20060407123159.24486.72368.malone@gangotri.ubuntu.com> After moving the DSDT.aml file, you need to rebuild the initramfs for it to actually not use it, with: sudo update-initramfs -u -k `uname -r` ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Unconfirmed => Needs Info -- Critical temperature reached (255 C) very soon at boot when using i810 https://launchpad.net/malone/bugs/37884 From launchpad at bzzt.net Fri Apr 7 12:41:25 2006 From: launchpad at bzzt.net (raboof) Date: Fri, 07 Apr 2006 12:41:25 -0000 Subject: [Bug 35398] bmac ethernet card no longer autodetected References: <20060317213039.26236.71408.malonedeb@gangotri.ubuntu.com> Message-ID: <20060407124125.24516.52908.launchpad@canonical@gangotri.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: When booting the Dapper flight5 livecd on a Powermac G3 B/W, the ethernet card is not autodetected, and thus networking does not work. after modprobing bmac manually I could successfully use ethernet. I'm not entirely sure this is the correct package to file this bug against, please reassign as needed. Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: When booting the Dapper flight5 livecd on a Powermac G3 B/W, the ethernet card is not autodetected, and thus networking does not work. after modprobing bmac manually I could successfully use ethernet. I'm not entirely sure this is the correct package to file this bug against, please reassign as needed. -- bmac ethernet card no longer autodetected https://launchpad.net/malone/bugs/35398 From ben.collins at ubuntu.com Fri Apr 7 12:39:57 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Fri, 07 Apr 2006 12:39:57 -0000 Subject: [Bug 35575] Re: Missing dependency's References: <20060319112347.26204.81169.malonedeb@gangotri.ubuntu.com> Message-ID: <20060407123957.24516.74800.launchpad@gangotri.ubuntu.com> ** Changed in: linux-meta linux-k7 (Ubuntu) Status: Needs Info => Rejected -- Missing dependency's https://launchpad.net/malone/bugs/35575 From ben.collins at ubuntu.com Fri Apr 7 12:38:48 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Fri, 07 Apr 2006 12:38:48 -0000 Subject: [Bug 34870] Re: ipw2200 repeatedly crashes. References: <20060314104909.30082.87848.malonedeb@gandwana.ubuntu.com> Message-ID: <20060407123848.32313.15524.malone@gandwana.ubuntu.com> Lot of crud in this bug report. Can someone confirm it using a clean install of dapper with no externally compiled modules? Not sure why someone would compile ipw2200 1.1.1 with 2.6.15-20.30, since that's exactly what is in that kernel anyway. Again, I need this tested on a clean system, be it liveCD or freshly installed. ** Changed in: linux-image-2.6.15-19-686 (Ubuntu) Sourcepackagename: linux-image-2.6.15-19-686 => linux-source-2.6.15 -- ipw2200 repeatedly crashes. https://launchpad.net/malone/bugs/34870 From ben.collins at ubuntu.com Fri Apr 7 12:42:34 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Fri, 07 Apr 2006 12:42:34 -0000 Subject: [Bug 36462] Re: optical mouse problem References: <20060324175400.6279.66012.malonedeb@gandwana.ubuntu.com> Message-ID: <20060407124234.32313.6004.malone@gandwana.ubuntu.com> Nothing that I know of. Sounds like buggy hardware to me. I need someone to verify this against a 2.6.15-20 kernel. -- optical mouse problem https://launchpad.net/malone/bugs/36462 From scott at ubuntu.com Fri Apr 7 12:41:24 2006 From: scott at ubuntu.com (Scott James Remnant) Date: Fri, 07 Apr 2006 12:41:24 -0000 Subject: [Bug 35398] Re: bmac ethernet card no longer autodetected References: <20060317213039.26236.71408.malonedeb@gangotri.ubuntu.com> Message-ID: <20060407124125.24516.64858.malone@gangotri.ubuntu.com> Ben, no MODALIAS in the OF-generated uevent; but the driver has aliases. ** Changed in: Ubuntu Sourcepackagename: None => linux-source-2.6.15 Assignee: Scott James Remnant => (unassigned) ** Also affects: udev (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed -- bmac ethernet card not autodetected (no MODALIAS in uevent) https://launchpad.net/malone/bugs/35398 From scott at ubuntu.com Fri Apr 7 12:44:59 2006 From: scott at ubuntu.com (Scott James Remnant) Date: Fri, 07 Apr 2006 12:44:59 -0000 Subject: [Bug 35398] Re: bmac ethernet card not autodetected (no MODALIAS in uevent) References: <20060317213039.26236.71408.malonedeb@gangotri.ubuntu.com> Message-ID: <20060407124459.24516.21481.malone@gangotri.ubuntu.com> raboof, for now just add bmac to the /etc/modules file in your system. -- bmac ethernet card not autodetected (no MODALIAS in uevent) https://launchpad.net/malone/bugs/35398 From scott at ubuntu.com Fri Apr 7 12:42:22 2006 From: scott at ubuntu.com (Scott James Remnant) Date: Fri, 07 Apr 2006 12:42:22 -0000 Subject: [Bug 35398] Re: bmac ethernet card no longer autodetected References: <20060317213039.26236.71408.malonedeb@gangotri.ubuntu.com> Message-ID: <20060407124222.32313.12883.malone@gandwana.ubuntu.com> If we don't expect MODALIAS-from-OF in dapper+1 timeframe, probably worth a udev helper as there are at least *some* variables in the uevent that should help us. ** Changed in: udev (Ubuntu) Severity: Normal => Wishlist Priority: None => Low Assignee: (unassigned) => Scott James Remnant ** Summary changed: - bmac ethernet card no longer autodetected + bmac ethernet card not autodetected (no MODALIAS in uevent) -- bmac ethernet card not autodetected (no MODALIAS in uevent) https://launchpad.net/malone/bugs/35398 From ach at mpe.mpg.de Fri Apr 7 12:45:06 2006 From: ach at mpe.mpg.de (allee) Date: Fri, 07 Apr 2006 12:45:06 -0000 Subject: [Bug 38555] Re: usb mouse not properly initialized References: <20060407072834.24486.931.malonedeb@gangotri.ubuntu.com> Message-ID: <20060407124506.32313.6634.malone@gandwana.ubuntu.com> I switched to console with alt-f1. Plugged in the USB mouse and cat /dev/input/mice gives output on mouse movements. So /dev/input/mouse does not work when Xserver is active (alt-f7 then plug in mouse). But is recognized when on console (alt-f1 then plugin mouse). ** Changed in: linux-source-2.6.15 linux-image-2.6.15-20-686 (Ubuntu) Sourcepackagename: linux-source-2.6.15 => None Binarypackagename: linux-image-2.6.15-20-686 => xserver-xorg-input-mouse -- usb mouse not properly initialized https://launchpad.net/malone/bugs/38555 From ben.collins at ubuntu.com Fri Apr 7 12:55:03 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Fri, 07 Apr 2006 12:55:03 -0000 Subject: [Bug 38563] Re: bcm43xx module does not work on HP nx6110 References: <20060407082349.32313.19836.malonedeb@gandwana.ubuntu.com> Message-ID: <20060407125504.24516.53098.malone@gangotri.ubuntu.com> This is something that will be mentioned in the release notes. ** Changed in: linux-meta linux-source (Ubuntu) Status: Unconfirmed => Rejected -- bcm43xx module does not work on HP nx6110 https://launchpad.net/malone/bugs/38563 From ben.collins at ubuntu.com Fri Apr 7 12:49:52 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Fri, 07 Apr 2006 12:49:52 -0000 Subject: [Bug 37589] Re: cannot mount usb hard drive when it's in sleep mode References: <20060401130538.23707.51582.malonedeb@gandwana.ubuntu.com> Message-ID: <20060407124952.32233.36325.malone@gandwana.ubuntu.com> >From the dmesg, it's clear that the device is being detected. Not sure what else I can do. Can you test this on a fresh install or liveCD? ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Unconfirmed => Needs Info -- cannot mount usb hard drive when it's in sleep mode https://launchpad.net/malone/bugs/37589 From ben.collins at ubuntu.com Fri Apr 7 12:50:44 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Fri, 07 Apr 2006 12:50:44 -0000 Subject: [Bug 37881] Re: Parallel port printer not working References: <20060403150937.23108.72392.malonedeb@gandwana.ubuntu.com> Message-ID: <20060407125044.32233.47109.launchpad@gandwana.ubuntu.com> ** Changed in: linux-source-2.6.15 linux-image-2.6.15-20-386 (Ubuntu) Status: Unconfirmed => Fix Released -- Parallel port printer not working https://launchpad.net/malone/bugs/37881 From ben.collins at ubuntu.com Fri Apr 7 12:57:16 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Fri, 07 Apr 2006 12:57:16 -0000 Subject: [Bug 38589] Re: Dapper flight6: availble kernels selection References: <20060407115633.24516.55871.malonedeb@gangotri.ubuntu.com> Message-ID: <20060407125716.32233.14913.launchpad@gandwana.ubuntu.com> ** Changed in: linux-meta linux-386 (Ubuntu) Sourcepackagename: linux-meta => debian-installer -- Dapper flight6: availble kernels selection https://launchpad.net/malone/bugs/38589 From ben.collins at ubuntu.com Fri Apr 7 12:59:58 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Fri, 07 Apr 2006 12:59:58 -0000 Subject: [Bug 37883] Re: EVO N610c does not wake up again References: <20060403151835.23108.4584.malonedeb@gandwana.ubuntu.com> Message-ID: <20060407125958.32313.84475.launchpad@gandwana.ubuntu.com> ** Changed in: linux-source-2.6.15 (Ubuntu) Status: In Progress => Fix Released -- EVO N610c does not wake up again https://launchpad.net/malone/bugs/37883 From ulrik.sverdrup at gmail.com Fri Apr 7 12:59:41 2006 From: ulrik.sverdrup at gmail.com (Ulrik Sverdrup) Date: Fri, 07 Apr 2006 12:59:41 -0000 Subject: [Bug 37714] Re: Sound garbled after resume after suspend References: <20060402122926.5415.33178.malonedeb@gangotri.ubuntu.com> Message-ID: <20060407125941.32313.96176.malone@gandwana.ubuntu.com> Steps to reproduce: 1. Play a song in rythmbox 2. While the song is playing, or paused, suspend the computer 3. Resume and raise volume (set to 0 on resume), click play if paused => The sound is garbled, it's recognizable but somehow in random order. To come back to normal: 1. Start playing a new song in rhythmbox. This is not only an issue with rhythmbox, though. The above applies to mpg321 too, with the addition that changing song doesn't change anything, you have to restart mpg321 -- Sound garbled after resume after suspend https://launchpad.net/malone/bugs/37714 From cyrilb856 at gmail.com Fri Apr 7 12:59:03 2006 From: cyrilb856 at gmail.com (marseillai) Date: Fri, 07 Apr 2006 12:59:03 -0000 Subject: [Bug 37589] Re: cannot mount usb hard drive when it's in sleep mode References: <20060401130538.23707.51582.malonedeb@gandwana.ubuntu.com> Message-ID: <20060407125903.24516.64238.malone@gangotri.ubuntu.com> i'll try on my laptop! i've just install kubuntu DF6 this day. -- cannot mount usb hard drive when it's in sleep mode https://launchpad.net/malone/bugs/37589 From ben.collins at ubuntu.com Fri Apr 7 13:02:05 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Fri, 07 Apr 2006 13:02:05 -0000 Subject: [Bug 37876] Re: Kernel does not read DVDs, no automount References: <20060403143410.25863.56627.malonedeb@gangotri.ubuntu.com> Message-ID: <20060407130205.24486.61818.malone@gangotri.ubuntu.com> It's very likely that your DVD drive does not like burned DVD's. If store bought DVD's work, this is surely the case. The linux driver for this device doesn't differentiate between the media type in the drive. So if anything is causing a problem like this, it's the actual hardware. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Unconfirmed => Rejected -- Kernel does not read DVDs, no automount https://launchpad.net/malone/bugs/37876 From ben.collins at ubuntu.com Fri Apr 7 13:03:02 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Fri, 07 Apr 2006 13:03:02 -0000 Subject: [Bug 37862] Re: kernel panic on IRQ allocation References: <20060403125606.25836.84932.malonedeb@gangotri.ubuntu.com> Message-ID: <20060407130302.32313.8380.malone@gandwana.ubuntu.com> Can you take a photo of the screen when this OOPS occurs? ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Unconfirmed => Needs Info -- kernel panic on IRQ allocation https://launchpad.net/malone/bugs/37862 From ben.collins at ubuntu.com Fri Apr 7 13:05:11 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Fri, 07 Apr 2006 13:05:11 -0000 Subject: [Bug 37784] Re: sky2 ethernet driver is freezing References: <20060402235408.5441.13560.malonedeb@gangotri.ubuntu.com> Message-ID: <20060407130511.24486.57951.launchpad@gangotri.ubuntu.com> ** Changed in: linux-source-2.6.15 linux-image-2.6.15-19-686 (Ubuntu) Binarypackagename: linux-image-2.6.15-19-686 => None Status: Unconfirmed => Confirmed ** Bug 37771 has been marked a duplicate of this bug -- sky2 ethernet driver is freezing https://launchpad.net/malone/bugs/37784 From ben.collins at ubuntu.com Fri Apr 7 13:05:18 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Fri, 07 Apr 2006 13:05:18 -0000 Subject: [Bug 37771] Re: network interface (marvell gigabit ethernet) stop working after a time References: <20060402211806.23707.89986.malonedeb@gandwana.ubuntu.com> Message-ID: <20060407130519.24486.1598.launchpad@gangotri.ubuntu.com> *** This bug is a duplicate of bug 37784 *** ** This bug has been marked a duplicate of bug 37784 sky2 ethernet driver is freezing -- network interface (marvell gigabit ethernet) stop working after a time https://launchpad.net/malone/bugs/37771 From scott at ubuntu.com Fri Apr 7 13:18:50 2006 From: scott at ubuntu.com (Scott James Remnant) Date: Fri, 07 Apr 2006 13:18:50 -0000 Subject: [Bug 38597] fsam7400 is fucking stupid References: <20060407131850.32313.51827.malonedeb@gandwana.ubuntu.com> Message-ID: <20060407131850.32313.51827.malonedeb@gandwana.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: The fsam7400 module (SW RF kill switch for ...) is fucking stupid, it removes and loads the ipw2100 module breaking the world. Instead it should just turn the radio on and off like sensible, well- behaved modules. ** Attachment added: "Patch to fix it" http://librarian.launchpad.net/1976770/fsam7400_fucking-stupid.patch -- fsam7400 is fucking stupid https://launchpad.net/malone/bugs/38597 From avilella at gmail.com Fri Apr 7 13:49:53 2006 From: avilella at gmail.com (Albert Vilella) Date: Fri, 07 Apr 2006 13:49:53 -0000 Subject: [Bug 37884] Re: Critical temperature reached (255 C) very soon at boot when using i810 References: <20060403152126.23108.73899.malonedeb@gandwana.ubuntu.com> Message-ID: <20060407134953.32233.43129.malone@gandwana.ubuntu.com> Aaaand that solved the "Critical Temperature" problem. See attached original and modified dsdt.dsl just to see how did I could broke the whole lot :) ** Attachment added: "original dsdt.dsl" http://librarian.launchpad.net/1976875/dsdt.dsl.orig ** Attachment added: "modified dsdl.dsl" http://librarian.launchpad.net/1976879/dsdt.dsl -- Critical temperature reached (255 C) very soon at boot when using i810 https://launchpad.net/malone/bugs/37884 From jgotangco at ubuntu.com Fri Apr 7 13:50:19 2006 From: jgotangco at ubuntu.com (Jerome S. Gotangco) Date: Fri, 07 Apr 2006 13:50:19 -0000 Subject: [Bug 33368] Re: X freeze the computer (Dapper - glcore) References: <20060302082234.17525.50004.malonedeb@gangotri.ubuntu.com> Message-ID: <20060407135019.24516.88934.malone@gangotri.ubuntu.com> Can you attach your Xorg.0.log and xorg.conf (click "Add Attachment" at the left side of this page). The thread of the link you listed here does not exist anymore thanks. ** Changed in: xorg (Ubuntu) Status: Unconfirmed => Needs Info -- X freeze the computer (Dapper - glcore) https://launchpad.net/malone/bugs/33368 From etienner at student.ethz.ch Fri Apr 7 14:07:56 2006 From: etienner at student.ethz.ch (etienner) Date: Fri, 07 Apr 2006 14:07:56 -0000 Subject: [Bug 38447] Re: Acer TravelMate stucks by typing Fn+F5 References: <20060406162321.32233.99792.malonedeb@gandwana.ubuntu.com> Message-ID: <20060407140756.32313.18032.malone@gandwana.ubuntu.com> So I have downloaded Kubuntu 6.06 (Dapper Drake) Flight CD 6 [Live] and I tried 2 times to type Fn+F5, the results: It doesn't stuck the first time I type it, typing it several times (~10) it does the same as before. In addition I tried to type the keys also during the startup (right after it loads the kernel) and It stucks, too. (After the first try) I tried it in my installed Breezy and with the Live CD I mentioned. I made a Photo of the screen, and if you want I can uploade somewhere on the web... If I have to do other tests, I'm ready to do them :-) -- Acer TravelMate stucks by typing Fn+F5 https://launchpad.net/malone/bugs/38447 From tasadarf at gmail.com Fri Apr 7 16:06:51 2006 From: tasadarf at gmail.com (tasadar_f) Date: Fri, 07 Apr 2006 16:06:51 -0000 Subject: [Bug 20125] Re: USB mouse freezing under Xorg with linux-image-2.6.12 References: <20060113140530.21012.7485.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060407160651.32313.39008.malone@gandwana.ubuntu.com> I have the same problem with breezy and dapper flight6. Please patch kernel 2.6.15. My solution is disconect and conect the usb mouse when the problem appear. lsusb Bus 001 Device 004: ID 046d:c00b Logitech, Inc. MouseMan Wheel -- USB mouse freezing under Xorg with linux-image-2.6.12 https://launchpad.net/malone/bugs/20125 From derrygeuther at wanadoo.nl Fri Apr 7 16:14:42 2006 From: derrygeuther at wanadoo.nl (Derry Geuther) Date: Fri, 07 Apr 2006 16:14:42 -0000 Subject: [Bug 38219] Re: Gnome freezes after log in References: <20060405162101.24486.32586.malonedeb@gangotri.ubuntu.com> Message-ID: <20060407161442.24486.77132.malone@gangotri.ubuntu.com> Yes, it does. Even after creating anew user account from the workaround and trying to log in with this new account, Gnome still freezes. Btw. when in I got a new kermel update to 2.6.15-20-386, a new option (actually 2, default and recovery modes) has been added to the Grub bootloader. Logging in from default mode with either the new or old account, didn't work either. -- Gnome freezes after log in https://launchpad.net/malone/bugs/38219 From vyruss at freemail.gr Fri Apr 7 16:14:59 2006 From: vyruss at freemail.gr (Jimmy Angelakos) Date: Fri, 07 Apr 2006 16:14:59 -0000 Subject: [Bug 37876] Re: Kernel does not read DVDs, no automount References: <20060403143410.25863.56627.malonedeb@gangotri.ubuntu.com> Message-ID: <20060407161459.32233.47785.malone@gandwana.ubuntu.com> Hold on a minute here, this is a "mainstream" drive and thousands of people have it, and it works flawlessly. It *used to work* perfectly well in Breezy under 2.6.12. It also works in Windows. And it does read burned DVDs, but not the ones that I burn with K3B. The ones that have been burnt in Windows' Nero work (I haven't figured out why). I think all of these point to that it is *definitely not* the hardware. Otherwise it wouldn't work under Breezy either and would read no burnt DVDs at all, and I wouldn't have filed this bug :) I do think that you have rejected this bug prematurely, and I'm changing it back to unconfirmed. This drive worked under Breezy, this is a regression. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Rejected => Unconfirmed -- Kernel does not read DVDs, no automount https://launchpad.net/malone/bugs/37876 From vyruss at freemail.gr Fri Apr 7 16:26:13 2006 From: vyruss at freemail.gr (Jimmy Angelakos) Date: Fri, 07 Apr 2006 16:26:13 -0000 Subject: [Bug 37876] Re: Kernel does not read DVDs, no automount References: <20060403143410.25863.56627.malonedeb@gangotri.ubuntu.com> Message-ID: <20060407162613.32233.31170.malone@gandwana.ubuntu.com> Same result, different error with my TEAC DV-516D DVD reader. I get: Apr 7 19:23:12 localhost kernel: [4372747.764000] cdrom: This disc doesn't have any tracks I recognize! This drive also worked perfectly in Breezy. -- Kernel does not read DVDs, no automount https://launchpad.net/malone/bugs/37876 From nafallo at magicalforest.se Fri Apr 7 16:47:43 2006 From: nafallo at magicalforest.se (=?utf-8?q?Christian_Bj=C3=A4levik?=) Date: Fri, 07 Apr 2006 16:47:43 -0000 Subject: [Bug 38546] Master and Headphone should be one on this device. References: <20060407061807.32233.31706.malonedeb@gandwana.ubuntu.com> Message-ID: <20060407164743.24516.65198.launchpad@canonical@gangotri.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Assignee: Ben Collins Status: In Progress Description: Hi! On my device: nafallo at darkelf:~ $ lspci -vns11.5 0000:00:11.5 0401: 1106:3059 (rev 50) Subsystem: 161f:2032 Flags: medium devsel, IRQ 209 I/O ports at 1000 [size=256] I need to set: options snd-via82xx ac97_quirk=hp_only in /etc/modprobe.d/alsa-base, otherwise I can only control Master Volume through GNOME. When I have headphones plugged in Master can't control Headphones, so the quirk above is needed to remove Master and rename Headphones to Master (IIUC). Could this be done automatically? Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Assignee: Ben Collins Status: In Progress Description: Hi! On my device: nafallo at darkelf:~ $ lspci -vns11.5 0000:00:11.5 0401: 1106:3059 (rev 50) Subsystem: 161f:2032 Flags: medium devsel, IRQ 209 I/O ports at 1000 [size=256] I need to set: options snd-via82xx ac97_quirk=hp_only in /etc/modprobe.d/alsa-base, otherwise I can only control Master Volume through GNOME. When I have headphones plugged in Master can't control Headphones, so the quirk above is needed to remove Master and rename Headphones to Master (IIUC). Could this be done automatically? -- Master and Headphone should be one on this device. https://launchpad.net/malone/bugs/38546 From ubuntu at chabada.sk Fri Apr 7 16:43:38 2006 From: ubuntu at chabada.sk (Peter Chabada) Date: Fri, 07 Apr 2006 16:43:38 -0000 Subject: [Bug 37784] Re: sky2 ethernet driver is freezing References: <20060402235408.5441.13560.malonedeb@gangotri.ubuntu.com> Message-ID: <20060407164338.32233.61731.malone@gandwana.ubuntu.com> Another bugreport for same problem: Bug #37771 -- sky2 ethernet driver is freezing https://launchpad.net/malone/bugs/37784 From crimsun at fungus.sh.nu Fri Apr 7 16:47:42 2006 From: crimsun at fungus.sh.nu (Daniel T. Chen) Date: Fri, 07 Apr 2006 16:47:42 -0000 Subject: [Bug 38546] Re: Master and Headphone should be one on this device. References: <20060407061807.32233.31706.malonedeb@gandwana.ubuntu.com> Message-ID: <20060407164743.24516.90450.launchpad@gangotri.ubuntu.com> ** Changed in: alsa-driver alsa-base (Ubuntu) Sourcepackagename: alsa-driver => linux-source-2.6.15 Binarypackagename: alsa-base => None Assignee: (unassigned) => Ben Collins Status: Unconfirmed => In Progress ** Summary changed: - Master and Headphone should be one on this device. + Add hp_only quirk for pci id [1106:3059] to via82xx ALSA driver -- Add hp_only quirk for pci id [1106:3059] to via82xx ALSA driver https://launchpad.net/malone/bugs/38546 From 84yelo3 at gmail.com Fri Apr 7 17:14:35 2006 From: 84yelo3 at gmail.com (=?utf-8?q?Nicol=C3=B2_Chieffo?=) Date: Fri, 07 Apr 2006 17:14:35 -0000 Subject: [Bug 38625] hibernate not working if on battery References: <20060407171435.24516.51893.malonedeb@gangotri.ubuntu.com> Message-ID: <20060407171435.24516.51893.malonedeb@gangotri.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: hello, my laptop is an ASUSTeK Computer Inc M6Ne (taken from dmidecode) when the AC is plugged I can correctly hibernate and resume when I'm on battery the hibernate process hangs the pc. the screen is black so I can't view any output except the syslog the pc hangs whith the HARD DISK LED on (even if the hd doesn't emit any noise) before having written to swap partition. here's the syslog. ** Attachment added: "syslog" http://librarian.launchpad.net/1979835/syslog.hibernate-battery -- hibernate not working if on battery https://launchpad.net/malone/bugs/38625 From aetherane at gmail.com Fri Apr 7 17:57:25 2006 From: aetherane at gmail.com (Benjamin Prosnitz) Date: Fri, 07 Apr 2006 17:57:25 -0000 Subject: [Bug 34870] Re: [Bug 34870] Re: ipw2200 repeatedly crashes. References: <20060314104909.30082.87848.malonedeb@gandwana.ubuntu.com> <20060407123848.32313.15524.malone@gandwana.ubuntu.com> Message-ID: I got it after a clean install of dapper flight 5 and I get it still with the latest kernel and updates. On 4/7/06, Ben Collins wrote: > > Lot of crud in this bug report. Can someone confirm it using a clean > install of dapper with no externally compiled modules? Not sure why someone > would compile ipw2200 1.1.1 with 2.6.15-20.30, since that's exactly what > is in that kernel anyway. > > Again, I need this tested on a clean system, be it liveCD or freshly > installed. > > ** Changed in: linux-image-2.6.15-19-686 (Ubuntu) > Sourcepackagename: linux-image-2.6.15-19-686 => linux-source-2.6.15 > -- > ipw2200 repeatedly crashes. > https://launchpad.net/malone/bugs/34870 > -- ipw2200 repeatedly crashes. https://launchpad.net/malone/bugs/34870 From jstueve at verizon.net Fri Apr 7 18:07:33 2006 From: jstueve at verizon.net (jstueve) Date: Fri, 07 Apr 2006 18:07:33 -0000 Subject: [Bug 38220] Re: Xorg [dri] i915 kernel module is 1.1 References: <20060405164018.24486.5077.malonedeb@gangotri.ubuntu.com> Message-ID: <20060407180733.24486.32193.malone@gangotri.ubuntu.com> I was able to re-enable by reinstalling the latest i915 driver from the snapshots at dri.freekdesktop.org -- Xorg [dri] i915 kernel module is 1.1 https://launchpad.net/malone/bugs/38220 From ubuntu-de at e-monkey.ch Fri Apr 7 18:47:07 2006 From: ubuntu-de at e-monkey.ch (emonkey) Date: Fri, 07 Apr 2006 18:47:07 -0000 Subject: [Bug 33368] Re: X freeze the computer (Dapper - glcore) References: <20060302082234.17525.50004.malonedeb@gangotri.ubuntu.com> Message-ID: <20060407184707.24486.88625.launchpad@gangotri.ubuntu.com> ** Attachment added: "Xorg.0.log 2005-04-07 emonkey" http://librarian.launchpad.net/1980605/Xorg.0.log -- X freeze the computer (Dapper - glcore) https://launchpad.net/malone/bugs/33368 From j.quigley at serviomatic.com Fri Apr 7 18:52:33 2006 From: j.quigley at serviomatic.com (Jason Quigley) Date: Fri, 07 Apr 2006 18:52:33 -0000 Subject: [Bug 9238] Re: 'mh2' driver is missing, affects Logitech Dinovo Media Desktop Bluetooth References: <20060113130851.21012.14767.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060407185233.24486.1031.malone@gangotri.ubuntu.com> Okay, it appears that by reselecting the keyboard layout made things work in the stock kernel. Dapper is killer! :-) -- 'mh2' driver is missing, affects Logitech Dinovo Media Desktop Bluetooth https://launchpad.net/malone/bugs/9238 From ubuntu-de at e-monkey.ch Fri Apr 7 18:58:20 2006 From: ubuntu-de at e-monkey.ch (emonkey) Date: Fri, 07 Apr 2006 18:58:20 -0000 Subject: [Bug 33368] Re: X freeze the computer (Dapper - glcore) References: <20060302082234.17525.50004.malonedeb@gangotri.ubuntu.com> Message-ID: <20060407185821.24486.15320.launchpad@gangotri.ubuntu.com> ** Attachment added: "xorg.conf 2005-04-07 emonkey" http://librarian.launchpad.net/1980689/xorg.conf -- X freeze the computer (Dapper - glcore) https://launchpad.net/malone/bugs/33368 From henrik at ubuntu.com Fri Apr 7 19:09:25 2006 From: henrik at ubuntu.com (Henrik Nilsen Omma) Date: Fri, 07 Apr 2006 19:09:25 -0000 Subject: [Bug 34259] Re: flashing waiting mouse with NVIDIA drivers References: <20060309234822.28582.64475.malonedeb@gandwana.ubuntu.com> Message-ID: <20060407190925.24516.84808.malone@gangotri.ubuntu.com> Sounds like a driver problem. Re-assigning bug to nvidia-glx. More info such as your full xorg.conf would probably also be helpful. - Henrik ** Changed in: xorg (Ubuntu) Sourcepackagename: xorg => nvidia-glx -- flashing waiting mouse with NVIDIA drivers https://launchpad.net/malone/bugs/34259 From ubuntu-de at e-monkey.ch Fri Apr 7 19:10:37 2006 From: ubuntu-de at e-monkey.ch (emonkey) Date: Fri, 07 Apr 2006 19:10:37 -0000 Subject: [Bug 33368] Re: X freeze the computer (Dapper - glcore) References: <20060302082234.17525.50004.malonedeb@gangotri.ubuntu.com> Message-ID: <20060407191037.24516.26679.launchpad@gangotri.ubuntu.com> ** Attachment added: "Xorg.0.log 2005-04-07 emonkey (2nd partition)" http://librarian.launchpad.net/1980906/Xorg.0.log ** Attachment added: "xorg.conf 2005-04-07 emonkey (2nd partition)" http://librarian.launchpad.net/1980910/xorg.conf -- X freeze the computer (Dapper - glcore) https://launchpad.net/malone/bugs/33368 From rlaager at users.sf.net Fri Apr 7 19:28:16 2006 From: rlaager at users.sf.net (Richard Laager) Date: Fri, 07 Apr 2006 19:28:16 -0000 Subject: [Bug 38253] RFE: ipw3495 Support References: <20060405190932.24516.9409.malonedeb@gangotri.ubuntu.com> Message-ID: <20060407192816.24516.98140.launchpad@canonical@gangotri.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Wishlist Priority: (none set) Status: Unconfirmed Description: As far as I can tell, Ubuntu and NetworkManager do not currently support the ipw3945 driver: http://ipw3945.sourceforge.net/ Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Wishlist Priority: (none set) Status: Unconfirmed Description: As far as I can tell, Ubuntu and NetworkManager do not currently support the ipw3945 driver: http://ipw3945.sourceforge.net/ -- RFE: ipw3495 Support https://launchpad.net/malone/bugs/38253 From zupop at email.it Fri Apr 7 19:21:14 2006 From: zupop at email.it (Zupop) Date: Fri, 07 Apr 2006 19:21:14 -0000 Subject: [Bug 35057] Re: Cannot read LCD status References: <20060315144109.11105.73961.malonedeb@gandwana.ubuntu.com> Message-ID: <20060407192114.32233.93039.launchpad@gandwana.ubuntu.com> ** Attachment added: "Here it is " http://librarian.launchpad.net/1980982/dmidecode.txt -- Cannot read LCD status https://launchpad.net/malone/bugs/35057 From lure.net at gmail.com Fri Apr 7 19:28:15 2006 From: lure.net at gmail.com (Luka Renko) Date: Fri, 07 Apr 2006 19:28:15 -0000 Subject: [Bug 38253] Re: RFE: ipw3495 Support References: <20060405190932.24516.9409.malonedeb@gangotri.ubuntu.com> Message-ID: <20060407192816.24516.70776.malone@gangotri.ubuntu.com> This is wishlist and first the driver need to get included into kernel. ** Changed in: network-manager (Ubuntu) Sourcepackagename: network-manager => linux-source-2.6.15 Severity: Normal => Wishlist -- RFE: ipw3495 Support https://launchpad.net/malone/bugs/38253 From mdz at ubuntu.com Fri Apr 7 19:27:57 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Fri, 07 Apr 2006 19:27:57 -0000 Subject: [Bug 35635] Re: Halts on Boot after Installation References: <20060319201635.12254.13260.malonedeb@gandwana.ubuntu.com> Message-ID: <20060407192757.24516.20464.malone@gangotri.ubuntu.com> Dropping unnecessary Ubuntu task; bug remains open on linux-source-2.6.15 ** Changed in: Ubuntu Status: Unconfirmed => Rejected -- Halts on Boot after Installation https://launchpad.net/malone/bugs/35635 From paul5082 at sio.midco.net Fri Apr 7 19:37:32 2006 From: paul5082 at sio.midco.net (Paul Sharp) Date: Fri, 07 Apr 2006 19:37:32 -0000 Subject: [Bug 35624] Broadcom BCM4306 wireless - unable to connect References: <20060319184821.12254.30538.malonedeb@gandwana.ubuntu.com> Message-ID: <20060407193732.24486.25491.launchpad@canonical@gangotri.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: The system correctly recognizes the BCM4306 802.11b/g Wireless LAN, it shows in the network list, but it won't connect - it gives the following error: Check that the settings are correct for this network and that the computer is correctly connected to it. The Broadcom wired works fine, an SMC PCMCIA card detects and is instantly working. The Broadcom worked fine in 5.10 using the Windows Wireless tool. I'm unsure what its case is, and it failed to initialize the wireless as well during the install, even though it was correctly recognized during setup. I had to hardwire the network to install 6.04. It says it could not enable Eth1 (which Eth* could be any card. The only thing I can see it's recognizing [u'net', u'net.80203'] instead of u'net.80211. Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: The system correctly recognizes the BCM4306 802.11b/g Wireless LAN, it shows in the network list, but it won't connect - it gives the following error: Check that the settings are correct for this network and that the computer is correctly connected to it. The Broadcom wired works fine, an SMC PCMCIA card detects and is instantly working. The Broadcom worked fine in 5.10 using the Windows Wireless tool. I'm unsure what its case is, and it failed to initialize the wireless as well during the install, even though it was correctly recognized during setup. I had to hardwire the network to install 6.04. It says it could not enable Eth1 (which Eth* could be any card. The only thing I can see it's recognizing [u'net', u'net.80203'] instead of u'net.80211. -- Broadcom BCM4306 wireless - unable to connect https://launchpad.net/malone/bugs/35624 From mdz at ubuntu.com Fri Apr 7 19:37:32 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Fri, 07 Apr 2006 19:37:32 -0000 Subject: [Bug 35624] Re: Broadcom BCM4306 wireless - unable to connect References: <20060319184821.12254.30538.malonedeb@gandwana.ubuntu.com> Message-ID: <20060407193732.24486.34586.malone@gangotri.ubuntu.com> I don't see any issues related to wireless-tools; driver issues lie with the kernel ** Changed in: wireless-tools (Ubuntu) Sourcepackagename: wireless-tools => linux-source-2.6.15 Binarypackagename: wireless-tools => None -- Broadcom BCM4306 wireless - unable to connect https://launchpad.net/malone/bugs/35624 From specialboy.johnson at gmail.com Fri Apr 7 19:38:24 2006 From: specialboy.johnson at gmail.com (Specialboy) Date: Fri, 07 Apr 2006 19:38:24 -0000 Subject: [Bug 34259] Re: [Bug 34259] Re: flashing waiting mouse with NVIDIA drivers References: <20060309234822.28582.64475.malonedeb@gandwana.ubuntu.com> <20060407190925.24516.84808.malone@gangotri.ubuntu.com> Message-ID: unfortunatly I have gone back to win2k due ot the postponed release of dapper. Sorry. But I did get the configuration off ubuntuforums On 4/7/06, Henrik Nilsen Omma wrote: > > Sounds like a driver problem. Re-assigning bug to nvidia-glx. More info > such as your full xorg.conf would probably also be helpful. > > - Henrik > > ** Changed in: xorg (Ubuntu) > Sourcepackagename: xorg => nvidia-glx > -- > flashing waiting mouse with NVIDIA drivers > https://launchpad.net/malone/bugs/34259 > -- flashing waiting mouse with NVIDIA drivers https://launchpad.net/malone/bugs/34259 From mdz at ubuntu.com Fri Apr 7 19:48:51 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Fri, 07 Apr 2006 19:48:51 -0000 Subject: [Bug 30963] Re: [dapper] snd_powermac does not recognize sound card References: <20060209122327.25235.98036.malonedeb@gangotri.ubuntu.com> Message-ID: <20060407194852.24516.42013.malone@gangotri.ubuntu.com> Nothing to do with alsa-utils, rejecting, bug remains open on linux-source-2.6.15 ** Changed in: alsa-utils (Ubuntu) Status: Unconfirmed => Rejected -- [dapper] snd_powermac does not recognize sound card https://launchpad.net/malone/bugs/30963 From fmccormick at videotron.ca Fri Apr 7 19:58:50 2006 From: fmccormick at videotron.ca (Frank McCormick) Date: Fri, 07 Apr 2006 19:58:50 -0000 Subject: [Bug 38026] Dapper won't boot under 686 kernel References: <20060404133858.23082.93873.malonedeb@gandwana.ubuntu.com> Message-ID: <20060407195850.24486.77147.launchpad@canonical@gangotri.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 kernel-image-2.6-686 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: My Dapper installation now won't boot under the i686 kernel installed via Synaptic. It stalls at "Loading Hardware drivers". Shutdown is the only way out. Until today the only problem was the fact that under the 686 kernel showdown left the computer live - the HD was shutdown. The 386 kernel shutsdown EVERYTHING. This Dapper is flight 3 upgraded daily, the latest was this morning April 4th. Public bug reported: Affects: linux-source-2.6.15 kernel-image-2.6-686 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: My Dapper installation now won't boot under the i686 kernel installed via Synaptic. It stalls at "Loading Hardware drivers". Shutdown is the only way out. Until today the only problem was the fact that under the 686 kernel showdown left the computer live - the HD was shutdown. The 386 kernel shutsdown EVERYTHING. This Dapper is flight 3 upgraded daily, the latest was this morning April 4th. -- Dapper won't boot under 686 kernel https://launchpad.net/malone/bugs/38026 From lure.net at gmail.com Fri Apr 7 19:58:49 2006 From: lure.net at gmail.com (Luka Renko) Date: Fri, 07 Apr 2006 19:58:49 -0000 Subject: [Bug 38026] Re: Dapper won't boot under 686 kernel References: <20060404133858.23082.93873.malonedeb@gandwana.ubuntu.com> Message-ID: <20060407195850.24486.37112.launchpad@gangotri.ubuntu.com> ** Changed in: kernel-image-2.6.7-i386 kernel-image-2.6-686 (Ubuntu) Sourcepackagename: kernel-image-2.6.7-i386 => linux-source-2.6.15 -- Dapper won't boot under 686 kernel https://launchpad.net/malone/bugs/38026 From metatux at gmx.net Fri Apr 7 20:56:01 2006 From: metatux at gmx.net (Markus Ehrlich) Date: Fri, 07 Apr 2006 20:56:01 -0000 Subject: [Bug 37883] Re: [Bug 37883] Re: EVO N610c does not wake up again References: <20060403151835.23108.4584.malonedeb@gandwana.ubuntu.com> <20060407125958.32313.84475.launchpad@gandwana.ubuntu.com> Message-ID: <4436D1E1.2060506@gmx.net> Hi, Ben Collins wrote: > ** Changed in: linux-source-2.6.15 (Ubuntu) > Status: In Progress => Fix Released wow ok. thank you. Bye, Markus -- Registered GNU/Linux user 392004|Machine number 292924 irc.freenode.net: #linux-plug,#linuxperu,#flisol-peru,#linux.mx, #debian-peru,#debian-co,#ubuntu-pe,#ubuntu-de,#ubuntu-co,#apesol http://www.netmeister.org/news/learn2quote.html http://www.sindominio.net/ayuda/preguntas-inteligentes.html http://www.justfuckinggoogleit.com/ :D:D:D -- EVO N610c does not wake up again https://launchpad.net/malone/bugs/37883 From paul5082 at sio.midco.net Fri Apr 7 20:59:04 2006 From: paul5082 at sio.midco.net (Paul Sharp) Date: Fri, 07 Apr 2006 20:59:04 -0000 Subject: [Bug 35624] Re: Broadcom BCM4306 wireless - unable to connect References: <20060319184821.12254.30538.malonedeb@gandwana.ubuntu.com> Message-ID: <20060407205904.24516.37597.malone@gangotri.ubuntu.com> I don't believe it's the wireless-tools either, but somewhere the BCM4306 is wrongly recognized with this version of Ubuntu, as it worked fantastic with Ubuntu 5.10. I've done lots of digging and can't find where it's going wrong, but then I'm not the programmer either. By rights, the way the BCM4306 wireless is recognized with 6.04, it should just work, as it calls it wireless and knows what it is, but it's unable to connect OR configure without using the wireless-tools. It's all the same hardware and configuration that worked flawlessly with 5.10. -- Broadcom BCM4306 wireless - unable to connect https://launchpad.net/malone/bugs/35624 From ubuntu-bugs at henrik.synth.no Fri Apr 7 20:56:07 2006 From: ubuntu-bugs at henrik.synth.no (neu) Date: Fri, 07 Apr 2006 20:56:07 -0000 Subject: [Bug 37703] Re: linux-image-2.6.15 fails to boot on Lifebook B2131 References: <20060402105649.23733.91763.malonedeb@gandwana.ubuntu.com> Message-ID: <20060407205608.32313.11277.malone@gandwana.ubuntu.com> This bug is fixed in linux-image-2.6.15-20. -- linux-image-2.6.15 fails to boot on Lifebook B2131 https://launchpad.net/malone/bugs/37703 From ubuntu-bugs at henrik.synth.no Fri Apr 7 20:57:33 2006 From: ubuntu-bugs at henrik.synth.no (neu) Date: Fri, 07 Apr 2006 20:57:33 -0000 Subject: [Bug 37703] Re: linux-image-2.6.15 fails to boot on Lifebook B2131 References: <20060402105649.23733.91763.malonedeb@gandwana.ubuntu.com> Message-ID: <20060407205733.24516.29145.malone@gangotri.ubuntu.com> fixed in linux-image-2.6.15-20 ** Changed in: linux-source-2.6.15 linux-image-2.6.15-19-386 (Ubuntu) Status: Unconfirmed => Fix Released -- linux-image-2.6.15 fails to boot on Lifebook B2131 https://launchpad.net/malone/bugs/37703 From chantry.xavier at gmail.com Fri Apr 7 21:12:51 2006 From: chantry.xavier at gmail.com (Xavier) Date: Fri, 07 Apr 2006 21:12:51 -0000 Subject: [Bug 38238] Re: prism54 no longer works References: <20060405180221.24486.72499.malonedeb@gangotri.ubuntu.com> Message-ID: <20060407211252.24486.32233.malone@gangotri.ubuntu.com> Same problem. My chipset normally use the isl3890 firmware, I've no idea why it tries to load this non existent isl3886 firmware with the new kernel. -- prism54 no longer works https://launchpad.net/malone/bugs/38238 From geocritter at earthlink.net Fri Apr 7 21:45:48 2006 From: geocritter at earthlink.net (Dan) Date: Fri, 07 Apr 2006 21:45:48 -0000 Subject: [Bug 35750] ACPI issues References: <20060320174920.22884.89276.malonedeb@gangotri.ubuntu.com> Message-ID: <20060407214548.24516.24151.launchpad@canonical@gangotri.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: On Toshiba M55-S3314, in Dapper, acpi is acting strangely. Battery performance correct, but suspend, restart, and shutdown only work intermittantly. Shutdown generally only working to shut down the system, but to not power it down (I have to hold the power button to actually turn the unit off completely). These were working ok in Breezy. Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: On Toshiba M55-S3314, in Dapper, acpi is acting strangely. Battery performance correct, but suspend, restart, and shutdown only work intermittantly. Shutdown generally only working to shut down the system, but to not power it down (I have to hold the power button to actually turn the unit off completely). These were working ok in Breezy. -- ACPI issues https://launchpad.net/malone/bugs/35750 From mdz at ubuntu.com Fri Apr 7 21:41:43 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Fri, 07 Apr 2006 21:41:43 -0000 Subject: [Bug 35788] Re: panic on boot with 2.6.15-18-amd64-generic References: <20060320224342.22884.40303.malonedeb@gangotri.ubuntu.com> Message-ID: <20060407214143.24516.82883.malone@gangotri.ubuntu.com> Can you attach a full dmesg from the working kernel? Does the generic kernel boot with nosmp? ** Changed in: linux-source-2.6.15 linux-image-2.6.15-18-amd64-k8 (Ubuntu) Status: Unconfirmed => Needs Info -- panic on boot with 2.6.15-18-amd64-generic https://launchpad.net/malone/bugs/35788 From mdz at ubuntu.com Fri Apr 7 21:46:28 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Fri, 07 Apr 2006 21:46:28 -0000 Subject: [Bug 35750] Re: ACPI issues References: <20060320174920.22884.89276.malonedeb@gangotri.ubuntu.com> Message-ID: <20060407214628.24516.89895.malone@gangotri.ubuntu.com> Please attach /var/log/dmesg and the output of "sudo dmidecode" ** Changed in: acpi (Ubuntu) Sourcepackagename: acpi => linux-source-2.6.15 Binarypackagename: acpi => None ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Unconfirmed => Needs Info -- ACPI issues https://launchpad.net/malone/bugs/35750 From mdz at ubuntu.com Fri Apr 7 21:47:03 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Fri, 07 Apr 2006 21:47:03 -0000 Subject: [Bug 35746] Re: Missing files in deb generated by make-kpkg kernel_headers References: <20060320174118.22857.83847.malonedeb@gangotri.ubuntu.com> Message-ID: <20060407214703.32233.16053.malone@gandwana.ubuntu.com> Patch available for review ** Changed in: kernel-package (Ubuntu) Assignee: (unassigned) => Ben Collins -- Missing files in deb generated by make-kpkg kernel_headers https://launchpad.net/malone/bugs/35746 From laurent.perrin at gmail.com Fri Apr 7 22:00:05 2006 From: laurent.perrin at gmail.com (taloche) Date: Fri, 07 Apr 2006 22:00:05 -0000 Subject: [Bug 35788] Re: panic on boot with 2.6.15-18-amd64-generic References: <20060320224342.22884.40303.malonedeb@gangotri.ubuntu.com> Message-ID: <20060407220005.32313.85140.launchpad@gandwana.ubuntu.com> ** Attachment added: "working kernel dmesg" http://librarian.launchpad.net/1982116/boot.log -- panic on boot with 2.6.15-18-amd64-generic https://launchpad.net/malone/bugs/35788 From ubuntu at ytene.org Fri Apr 7 22:04:33 2006 From: ubuntu at ytene.org (ytene) Date: Fri, 07 Apr 2006 22:04:33 -0000 Subject: [Bug 26859] Re: general: 2.6.12-10 regressions from 2.6.12-9 References: <20060113145140.21012.69410.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060407220433.24516.28235.malone@gangotri.ubuntu.com> Fabio, Ben, I've just completed some [very preliminary] testing with Dapper. So far, I can advise that [on the Thunder K8W dual-Opteron board, at least] this bug appears to have been eliminated. [I do appreciate that Dapper uses a much later kernel, but hey, this is progress...] Basic testing shows that the installer auto-detects the 2nd [SMP] processor and the machine is configured to handle this from the outset. Intrestingly, neither uname -r, nor Synaptic list -SMP specific kernels for this release, even though it's clearly an SMP kernel, as ably demonstrated by, for example, GNOME System Monitor. I must go read the release notes in more detail... Obviously Dapper is still at Flight-6 alpha release stage, but on the basis of a couple of hours basic GNOME/KDE app/functionality testing this is looking mightily impressive. Am currently running the Breezy i386-SMP kernel quite comfortably on the K8W, but now looking to jump to Dapper in June, once the release is declared stable. Not sure if either of you have been involved in the Dapper kernel development, by my thanks and appreciation to all that have! Regards, Clive -- general: 2.6.12-10 regressions from 2.6.12-9 https://launchpad.net/malone/bugs/26859 From lloyd.meinholz at bmpcoe.org Fri Apr 7 22:21:12 2006 From: lloyd.meinholz at bmpcoe.org (Lloyd H. Meinholz) Date: Fri, 07 Apr 2006 22:21:12 -0000 Subject: [Bug 23731] 5.10 amd64 audigy sound static References: <20060113142520.21012.53625.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060407222112.24516.62992.launchpad@canonical@gangotri.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: Low Assignee: Ben Collins Status: Fix Released Description: My sound comes out as only static. I have enabled sound server startup under System -> Preferences -> Sound. It lists Audigy 2ZS [SB0350] as my sound card. When I play any of the sound events I just get a staticy sound. The same happens when I try aplay or xmms. lspci reports my sound card: 0000:01:06.0 Multimedia audio controller: Creative Labs SB Audigy (rev 04) 0000:01:06.1 Input device controller: Creative Labs SB Audigy MIDI/Game port (rev 04) The drivers seem to be loaded, here is lsmod: emu10k1_gp 4480 0 gameport 16392 2 emu10k1_gp snd_emu10k1_synth 7680 0 snd_emux_synth 35072 1 snd_emu10k1_synth snd_seq_virmidi 7808 1 snd_emux_synth snd_seq_midi_emul 7168 1 snd_emux_synth snd_seq_dummy 4484 0 snd_seq_oss 32128 0 snd_seq_midi 9920 0 snd_seq_midi_event 8064 3 snd_seq_virmidi,snd_seq_oss,snd_seq_midi snd_seq 52032 9 snd_emux_synth,snd_seq_virmidi,snd_seq_midi_emul,snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event snd_emu10k1 109476 2 snd_emu10k1_synth snd_rawmidi 27040 3 snd_seq_virmidi,snd_seq_midi,snd_emu10k1 snd_seq_device 9488 8 snd_emu10k1_synth,snd_emux_synth,snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq,snd_emu10k1,snd_rawmidi snd_ac97_codec 87000 1 snd_emu10k1 snd_pcm_oss 51232 0 snd_mixer_oss 17664 1 snd_pcm_oss snd_pcm 91020 3 snd_emu10k1,snd_ac97_codec,snd_pcm_oss snd_timer 24200 3 snd_seq,snd_emu10k1,snd_pcm snd_page_alloc 11408 2 snd_emu10k1,snd_pcm snd_util_mem 5376 2 snd_emux_synth,snd_emu10k1 snd_hwdep 10784 2 snd_emux_synth,snd_emu10k1 snd 55784 15 snd_emux_synth,snd_seq_virmidi,snd_seq_oss,snd_seq,snd_emu10k1,snd_rawmidi,snd_seq_device,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer,snd_hwdep soundcore 10912 1 snd Here is the only thing I noticed in dmesg: [ 70.522996] Installing spdif_bug patch: Audigy 2 ZS [SB0350] [ 71.081769] gameport: EMU10K1 is pci0000:01:06.1/gameport0, io 0x8c00, speed 1053kHz I didn't find anything that looked useful in /var/log/messages. Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: Low Assignee: Ben Collins Status: Fix Released Description: My sound comes out as only static. I have enabled sound server startup under System -> Preferences -> Sound. It lists Audigy 2ZS [SB0350] as my sound card. When I play any of the sound events I just get a staticy sound. The same happens when I try aplay or xmms. lspci reports my sound card: 0000:01:06.0 Multimedia audio controller: Creative Labs SB Audigy (rev 04) 0000:01:06.1 Input device controller: Creative Labs SB Audigy MIDI/Game port (rev 04) The drivers seem to be loaded, here is lsmod: emu10k1_gp 4480 0 gameport 16392 2 emu10k1_gp snd_emu10k1_synth 7680 0 snd_emux_synth 35072 1 snd_emu10k1_synth snd_seq_virmidi 7808 1 snd_emux_synth snd_seq_midi_emul 7168 1 snd_emux_synth snd_seq_dummy 4484 0 snd_seq_oss 32128 0 snd_seq_midi 9920 0 snd_seq_midi_event 8064 3 snd_seq_virmidi,snd_seq_oss,snd_seq_midi snd_seq 52032 9 snd_emux_synth,snd_seq_virmidi,snd_seq_midi_emul,snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event snd_emu10k1 109476 2 snd_emu10k1_synth snd_rawmidi 27040 3 snd_seq_virmidi,snd_seq_midi,snd_emu10k1 snd_seq_device 9488 8 snd_emu10k1_synth,snd_emux_synth,snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq,snd_emu10k1,snd_rawmidi snd_ac97_codec 87000 1 snd_emu10k1 snd_pcm_oss 51232 0 snd_mixer_oss 17664 1 snd_pcm_oss snd_pcm 91020 3 snd_emu10k1,snd_ac97_codec,snd_pcm_oss snd_timer 24200 3 snd_seq,snd_emu10k1,snd_pcm snd_page_alloc 11408 2 snd_emu10k1,snd_pcm snd_util_mem 5376 2 snd_emux_synth,snd_emu10k1 snd_hwdep 10784 2 snd_emux_synth,snd_emu10k1 snd 55784 15 snd_emux_synth,snd_seq_virmidi,snd_seq_oss,snd_seq,snd_emu10k1,snd_rawmidi,snd_seq_device,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer,snd_hwdep soundcore 10912 1 snd Here is the only thing I noticed in dmesg: [ 70.522996] Installing spdif_bug patch: Audigy 2 ZS [SB0350] [ 71.081769] gameport: EMU10K1 is pci0000:01:06.1/gameport0, io 0x8c00, speed 1053kHz I didn't find anything that looked useful in /var/log/messages. -- 5.10 amd64 audigy sound static https://launchpad.net/malone/bugs/23731 From crimsun at fungus.sh.nu Fri Apr 7 22:21:11 2006 From: crimsun at fungus.sh.nu (Daniel T. Chen) Date: Fri, 07 Apr 2006 22:21:11 -0000 Subject: [Bug 23731] Re: 5.10 amd64 audigy sound static References: <20060113142520.21012.53625.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060407222112.24516.19326.malone@gangotri.ubuntu.com> This issue was fixed in git commit 85c6716a5c51fbd6b09946ab6d1842566b147f3f (2.6.15-15.20). Please reopen if still exhibited. ** Changed in: Ubuntu Sourcepackagename: None => linux-source-2.6.15 Priority: Medium => Low Assignee: (unassigned) => Ben Collins ** Summary changed: - 5.10 amd64 audigy sound static + Distorted audio on Ubuntu 5.10 on amd64 with Audigy 2ZS [SB0350] -- Distorted audio on Ubuntu 5.10 on amd64 with Audigy 2ZS [SB0350] https://launchpad.net/malone/bugs/23731 From crimsun at fungus.sh.nu Fri Apr 7 22:32:26 2006 From: crimsun at fungus.sh.nu (Daniel T. Chen) Date: Fri, 07 Apr 2006 22:32:26 -0000 Subject: [Bug 38546] Re: Add hp_only quirk for pci id [161f:2032] to via82xx ALSA driver References: <20060407061807.32233.31706.malonedeb@gandwana.ubuntu.com> Message-ID: <20060407223226.32313.54496.launchpad@gandwana.ubuntu.com> ** Summary changed: - Add hp_only quirk for pci id [1106:3059] to via82xx ALSA driver + Add hp_only quirk for pci id [161f:2032] to via82xx ALSA driver -- Add hp_only quirk for pci id [161f:2032] to via82xx ALSA driver https://launchpad.net/malone/bugs/38546 From spd106 at lycos.co.uk Fri Apr 7 22:33:01 2006 From: spd106 at lycos.co.uk (Stephen Drake) Date: Fri, 07 Apr 2006 22:33:01 -0000 Subject: [Bug 21057] Re: Sound from ES1978 Maestro 2E garbled when USB CD-ROM drive plugged in References: <20060113141036.21012.76826.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060407223301.32233.60876.malone@gandwana.ubuntu.com> It is still present in standard install of dapper flight 6. Though the effects are reduced, it still occurs. cat /proc/version Linux version 2.6.15-19-386 (buildd at rothera) (gcc version 4.0.3 (Ubuntu 4.0.3-1u buntu3)) #1 PREEMPT Mon Mar 20 16:46:02 UTC 2006 I'll update and check again with the latest kernel. -- Sound from ES1978 Maestro 2E garbled when USB CD-ROM drive plugged in https://launchpad.net/malone/bugs/21057 From crimsun at fungus.sh.nu Fri Apr 7 22:52:18 2006 From: crimsun at fungus.sh.nu (Daniel T. Chen) Date: Fri, 07 Apr 2006 22:52:18 -0000 Subject: [Bug 38546] Re: Add hp_only quirk for pci id [161f:2032] to via82xx ALSA driver References: <20060407061807.32233.31706.malonedeb@gandwana.ubuntu.com> Message-ID: <20060407225218.24516.85976.malone@gangotri.ubuntu.com> https://lists.ubuntu.com/archives/kernel-team/2006-April/000805.html ** Changed in: linux-source-2.6.15 (Ubuntu) Status: In Progress => Fix Committed -- Add hp_only quirk for pci id [161f:2032] to via82xx ALSA driver https://launchpad.net/malone/bugs/38546 From tskisner.public at gmail.com Fri Apr 7 23:27:51 2006 From: tskisner.public at gmail.com (TedKisner) Date: Fri, 07 Apr 2006 23:27:51 -0000 Subject: [Bug 38673] prism54 driver requires new firmware name References: <20060407232751.24516.74228.malonedeb@gangotri.ubuntu.com> Message-ID: <20060407232751.24516.74228.malonedeb@gangotri.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 linux-image-2.6.15-20-686 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: In kernel version 2.6.15-20, the prism54 driver attempts to load a non existant firmware file: Loaded prism54 driver, version 1.2 islusb: Request firmware for 'isl3886' failed: -2 eth2: could not upload firmware ('isl3886') eth2: islpci_reset: failure islusb: unable to boot device The firmware file exists in /lib/firmware/2.6.15-20-*, but it has the old name "isl3890". The card I am using is an older "fullmac" prism54, rather than one of the new "softmac" varieties. From reading the prism54.org website, it sounds like the latest kernel driver is now unified and supports both types of prism54 chipsets. I'm assuming this is why the required firmware name has changed to "isl3886", which is the name of the newer softmac chips. Renaming the file (isl3890 --> isl3886) solves this problem. The firmware is then successfully uploaded to the card. cheers, -Ted Kisner -- prism54 driver requires new firmware name https://launchpad.net/malone/bugs/38673 From dennis at kaarsemaker.net Fri Apr 7 23:24:35 2006 From: dennis at kaarsemaker.net (Dennis Kaarsemaker) Date: Fri, 07 Apr 2006 23:24:35 -0000 Subject: [Bug 34259] Re: [Bug 34259] Re: [Bug 34259] Re: flashing waiting mouse with NVIDIA drivers References: <20060309234822.28582.64475.malonedeb@gandwana.ubuntu.com> <20060407190925.24516.84808.malone@gangotri.ubuntu.com> Message-ID: <1144452275.5369.30.camel@mirage> Sorry, but if you cannot test it or give information, we can do nothing but close this report. status Rejected ** Changed in: nvidia-glx (Ubuntu) Status: Needs Info => Rejected -- flashing waiting mouse with NVIDIA drivers https://launchpad.net/malone/bugs/34259 From zulcss at gmail.com Sat Apr 8 00:06:33 2006 From: zulcss at gmail.com (zul) Date: Sat, 08 Apr 2006 00:06:33 -0000 Subject: [Bug 30547] Re: cardbus bridge problem? cards not recognised References: <20060205112038.11612.25982.malonedeb@gandwana.ubuntu.com> Message-ID: <20060408000633.24486.61371.malone@gangotri.ubuntu.com> Patch sent. ** Changed in: linux-source-2.6.15 linux-image-2.6.15-14-686 (Ubuntu) Status: In Progress => Fix Committed -- cardbus bridge problem? cards not recognised https://launchpad.net/malone/bugs/30547 From zulcss at gmail.com Sat Apr 8 00:17:26 2006 From: zulcss at gmail.com (zul) Date: Sat, 08 Apr 2006 00:17:26 -0000 Subject: [Bug 38597] Re: fsam7400 is fucking stupid References: <20060407131850.32313.51827.malonedeb@gandwana.ubuntu.com> Message-ID: <20060408001727.24486.38649.malone@gangotri.ubuntu.com> Patch sent to Ben. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Unconfirmed => Fix Committed -- fsam7400 is fucking stupid https://launchpad.net/malone/bugs/38597 From mdz at ubuntu.com Sat Apr 8 00:20:10 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Sat, 08 Apr 2006 00:20:10 -0000 Subject: [Bug 35814] Re: bcm43xx: MAC suspend failed, ATAL ERROR: BCM43xx_IRQ_XMIT_ERROR References: <20060321031914.8118.81768.malonedeb@gandwana.ubuntu.com> Message-ID: <20060408002011.32313.34638.launchpad@gandwana.ubuntu.com> ** Summary changed: - bcm43xx MAX syspend failed + bcm43xx: MAC suspend failed, ATAL ERROR: BCM43xx_IRQ_XMIT_ERROR ** Summary changed: - bcm43xx: MAC suspend failed, ATAL ERROR: BCM43xx_IRQ_XMIT_ERROR + panic in bcm43xx_interrupt_tasklet -- panic in bcm43xx_interrupt_tasklet https://launchpad.net/malone/bugs/35814 From mdz at ubuntu.com Sat Apr 8 00:22:55 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Sat, 08 Apr 2006 00:22:55 -0000 Subject: [Bug 35808] Re: sound failure, modprobe error in Dapper References: <20060321025303.8118.32594.malonedeb@gandwana.ubuntu.com> Message-ID: <20060408002255.32233.43124.malone@gandwana.ubuntu.com> Was there an error while upgrading your kernel? Send the dmesg output from "sudo modprobe snd"; the rest is just fallout from that failing. Is this still happening after upgrading to the latest kernel? ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Unconfirmed => Needs Info -- sound failure, modprobe error in Dapper https://launchpad.net/malone/bugs/35808 From andrew.conkling at gmail.com Sat Apr 8 00:28:39 2006 From: andrew.conkling at gmail.com (Andrew Conkling) Date: Sat, 08 Apr 2006 00:28:39 -0000 Subject: [Bug 38464] Re: Power management stopped working on Dell Inspiron 6000 References: <20060406183554.24516.21959.malonedeb@gangotri.ubuntu.com> Message-ID: <20060408002839.24516.26002.malone@gangotri.ubuntu.com> Going on your hunch, I manually ran gnome-screensaver (g-p-m was already running) and found that it worked. I was unable to reproduce this after rebooting; the screensaver worked fine. Sorry for the noise. ** Changed in: gnome-power-manager (Ubuntu) Status: Unconfirmed => Rejected -- Power management stopped working on Dell Inspiron 6000 https://launchpad.net/malone/bugs/38464 From zulcss at gmail.com Sat Apr 8 00:33:49 2006 From: zulcss at gmail.com (zul) Date: Sat, 08 Apr 2006 00:33:49 -0000 Subject: [Bug 35444] Re: freeze References: <20060318090243.12186.10868.malonedeb@gandwana.ubuntu.com> Message-ID: <20060408003349.32313.36396.malone@gandwana.ubuntu.com> Can you please attach the ouptut of sudo dmidecode > dmi.txt Thanks Chuck ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Unconfirmed => Needs Info -- freeze https://launchpad.net/malone/bugs/35444 From david at allouche.net Sat Apr 8 01:26:30 2006 From: david at allouche.net (David Allouche) Date: Sat, 08 Apr 2006 01:26:30 -0000 Subject: [Bug 38461] Re: unstable ordering of eth devices References: <20060406182215.24516.22276.malonedeb@gangotri.ubuntu.com> Message-ID: <20060408012631.32313.3977.malone@gandwana.ubuntu.com> Thank you for the clarification. Then it's an upgrade bug. The observable behaviour is that in previous Ubuntu releases, the ordering of the network devices was consistent, but that after upgrading to Dapper it changed arbitrarily and is no longer stable. I found my iftab contained a single line "eth0 mac 00:0d:60:f8:d1:db", while (according to hal-device-mana) the mac address of my network adapters are 00:11:25:b3:ea:47 (e1000) and 00:0e:35:52:56:3a (ipw2200). ** Changed in: linux-source-2.6.15 linux-image-2.6.15-20-686 (Ubuntu) Sourcepackagename: linux-source-2.6.15 => udev Binarypackagename: linux-image-2.6.15-20-686 => udev Status: Rejected => Unconfirmed -- unstable ordering of eth devices https://launchpad.net/malone/bugs/38461 From jasongrieves at hotmail.com Sat Apr 8 01:27:38 2006 From: jasongrieves at hotmail.com (Jason Grieves) Date: Sat, 08 Apr 2006 01:27:38 -0000 Subject: [Bug 16247] Re: Dell Inspiron 600m - ndiswrapper hangs on boot if running on battery References: <20060113134532.21012.77031.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060408012738.32233.53986.malone@gandwana.ubuntu.com> I want to share that this occurs with my Inspiron 8600 with dapper drake with most recent kernel *20. the computer locks up at manual drivers, doing a recovery mode shows ndiswrapper laoding the correct hardware, but locoking up at irq. This is a major problem for laptop use :) -- Dell Inspiron 600m - ndiswrapper hangs on boot if running on battery https://launchpad.net/malone/bugs/16247 From seth at ubuntu.com Sat Apr 8 01:42:16 2006 From: seth at ubuntu.com (Seth Kinast) Date: Sat, 08 Apr 2006 01:42:16 -0000 Subject: [Bug 16247] Re: Dell Inspiron 600m - ndiswrapper hangs on boot if running on battery References: <20060113134532.21012.77031.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060408014216.24516.92914.malone@gangotri.ubuntu.com> This bug is no longer an issue for me because the bcm43xx driver is working fabulously. Ndiswrapper still exhibits this issue, however. -- Dell Inspiron 600m - ndiswrapper hangs on boot if running on battery https://launchpad.net/malone/bugs/16247 From fmccormick at videotron.ca Sat Apr 8 01:46:52 2006 From: fmccormick at videotron.ca (Frank McCormick) Date: Sat, 08 Apr 2006 01:46:52 -0000 Subject: [Bug 29601] Re: linux-386 boots, but linux-686 doesn't boot. References: <20060124214540.28441.86685.malonedeb@gangotri.ubuntu.com> Message-ID: <20060408014652.32233.80207.malone@gandwana.ubuntu.com> I'm running kernel 2-6-15-19 - until I read this discussion my HP Vectra (Pentium 3) wouldn't boot with the 686 version - adding NOAPIC to the Kernel command line solved the problem. To ensure my network card was not sharing an IRQ I already had acpi=noirq on the command line. But everything still **seems** to work. We'll see. -- linux-386 boots, but linux-686 doesn't boot. https://launchpad.net/malone/bugs/29601 From carl at system76.com Sat Apr 8 05:25:22 2006 From: carl at system76.com (Carl Richell) Date: Sat, 08 Apr 2006 05:25:22 -0000 Subject: [Bug 35742] Re: Missing support for 945GM chipset References: <20060320171618.8118.14819.malonedeb@gandwana.ubuntu.com> Message-ID: <20060408052522.24516.60997.malone@gangotri.ubuntu.com> Direct rendering is now working on the Asus Z62F laptop with the 945GM chipset; however, the resolution is still wrong. Should this be a new bug? -- Missing support for 945GM chipset https://launchpad.net/malone/bugs/35742 From acornejo at ieee.org Sat Apr 8 07:04:20 2006 From: acornejo at ieee.org (Alejandro Cornejo) Date: Sat, 08 Apr 2006 07:04:20 -0000 Subject: [Bug 38688] unable to boot References: <20060408070420.32313.56814.malonedeb@gandwana.ubuntu.com> Message-ID: <20060408070420.32313.56814.malonedeb@gandwana.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 linux-image-2.6.15-20-amd64-k8 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: It fails to boot, after mounting the filesystems it displays a message saying something like: waiting for root filesystem... It hangs there indefinetly, this did not happen with kernel 2.6.15-19. I dont know if it is relevant, but my HD is SATA, and my partition is formated to ext3. I have a single hard disk installed, which has four partitions, here I list the information reported by fdisk: Disk /dev/sda: 160.0 GB, 160000000000 bytes 255 heads, 63 sectors/track, 19452 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/sda1 1 5 40131 de Dell Utility /dev/sda2 * 6 1280 10241437+ 7 HPFS/NTFS /dev/sda3 1281 8929 61440592+ 83 Linux /dev/sda4 8930 19452 84525997+ b W95 FAT32 -- unable to boot https://launchpad.net/malone/bugs/38688 From jsestri2 at uiuc.edu Sat Apr 8 07:14:27 2006 From: jsestri2 at uiuc.edu (JJ) Date: Sat, 08 Apr 2006 07:14:27 -0000 Subject: [Bug 38689] sky2 network driver issue References: <20060408071427.32313.1607.malonedeb@gandwana.ubuntu.com> Message-ID: <20060408071427.32313.1607.malonedeb@gandwana.ubuntu.com> Public bug reported: Affects: linux-meta linux-386 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: There appears to be an issue related to transmit/recieve buffers with the Marvell Yukon PCI-E gigabit LAN NIC, that appears to be correctable with the official drivers in windows, but has not been fixed for the sky2 driver. Currently I am running the kernel version 2.6.15-16-386. The problem mostly is repeated when I attempt to use some remote programs via ssh with some graphical XWindows. It seems to be fairly repeatable that once the network has been used a lot it appears the driver has hung, and the network interface must be restarted to get it going again. Here is a link that describes fixing the problem with official drivers: http://www.planetamd64.com/lofiversion/index.php/t9643.html (it's towards the bottom.) I dont know if it will help solve the problem or not. Hopefully this is all the needed info. -- sky2 network driver issue https://launchpad.net/malone/bugs/38689 From lydickaw at ruffledpenguin.org Sat Apr 8 07:36:18 2006 From: lydickaw at ruffledpenguin.org (Adam Lydick) Date: Sat, 08 Apr 2006 07:36:18 -0000 Subject: [Bug 37434] Re: hotplug trouble with USB CD-ROM References: <20060331051019.5415.66332.malonedeb@gangotri.ubuntu.com> Message-ID: <20060408073618.24486.44884.malone@gangotri.ubuntu.com> Hmmm. What I'm observing is that the usb disconnect never seems to trigger an unmount. How long should it take for the kernel to realize the device is really dead? I waited for several minutes and it was still lingering -- that seems odd Is hotplug normally responsible for the unmount (on a fully installed system)? Note that the kernel seems to be aware that the underlying block device is no longer available (see: "rejecting command to dead device" in the syslog). Does it log this even while retrying? -- hotplug trouble with USB CD-ROM https://launchpad.net/malone/bugs/37434 From toojays at toojays.net Sat Apr 8 07:39:25 2006 From: toojays at toojays.net (John Steele Scott) Date: Sat, 08 Apr 2006 07:39:25 -0000 Subject: [Bug 38691] oops in prism2_usb from 2.6.15-20 References: <20060408073925.32233.43866.malonedeb@gandwana.ubuntu.com> Message-ID: <20060408073925.32233.43866.malonedeb@gandwana.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: I was playing around with some network settings today, and managed to cause an oops in the prism2_usb module. I'm not sure exactly how, but it seems to have happened straight after the link came up. After the oops, my keyboard was no longer responsive. I couldn't switch virtual terminals, had to do a Ctrl-Apple-Power to reboot. This is with 2.6.15-20, on an iBook G4. Apr 8 08:34:39 fuzz kernel: [18725.327909] linkstatus=DISCONNECTED (unhandled) Apr 8 08:34:39 fuzz kernel: [18725.798924] linkstatus=CONNECTED Apr 8 08:34:39 fuzz kernel: [18725.805982] kernel BUG in add_timer at include/linux/timer.h:83! Apr 8 08:34:39 fuzz kernel: [18725.806001] Oops: Exception in kernel mode, sig: 5 [#1] Apr 8 08:34:39 fuzz kernel: [18725.806009] Modules linked in: prism2_usb arc4 ieee80211_crypt_wep binfmt_misc rfcomm l2cap bluetooth af_packet nfsd exportfs lockd sunrpc autofs4 radeon drm cpufreq_powersave cpufreq_stats cpufreq_userspace cpufreq_ondemand cpufreq_conservative dm_mod md_mod therm_adt746x sr_mod ipv6 snd_powermac snd_pcm_oss snd_mixer_oss snd_pcm snd_timer snd soundcore snd_page_alloc sbp2 scsi_mod apm_emu yenta_socket rsrc_nonstatic pcmcia_core sungem sungem_phy ohci1394 ieee1394 ieee80211softmac ieee80211 ieee80211_crypt uninorth_agp agpgart tsdev evdev usbhid reiserfs ehci_hcd ohci_hcd usbcore ide_disk ide_cd cdrom i2c_keywest capability commoncap Apr 8 08:34:39 fuzz kernel: [18725.806134] NIP: DA85008C LR: DA850054 CTR: C0061BC0 Apr 8 08:34:39 fuzz kernel: [18725.806145] REGS: c1fd3e40 TRAP: 0700 Not tainted (2.6.15-20-powerpc) Apr 8 08:34:39 fuzz kernel: [18725.806154] MSR: 00029032 CR: 84008022 XER: 20000000 Apr 8 08:34:39 fuzz kernel: [18725.806175] TASK = d7fc0610[4] 'events/0' THREAD: c1fd2000 Apr 8 08:34:39 fuzz kernel: [18725.806183] GPR00: 00000001 C1FD3EF0 D7FC0610 DA85A75C DA8595CC 00000002 D6D64BE1 00000000 Apr 8 08:34:39 fuzz kernel: [18725.806203] GPR08: D6D64BE4 C0347A57 C0347A58 004625ED 24008022 00000000 00000000 41400000 Apr 8 08:34:39 fuzz kernel: [18725.806225] GPR16: 0171D4BC 0171D4C0 00240D18 00240D64 00240D1C 0171C478 0166F758 D6D64C04 Apr 8 08:34:39 fuzz kernel: [18725.806246] GPR24: D6D64000 D3C9A000 D7FEC870 D7FEC878 00000001 00009032 D7FEC868 D6D64000 Apr 8 08:34:39 fuzz kernel: [18725.806268] NIP [DA85008C] prism2sta_commsqual_defer+0x8c/0xf0 [prism2_usb] Apr 8 08:34:39 fuzz kernel: [18725.806318] LR [DA850054] prism2sta_commsqual_defer+0x54/0xf0 [prism2_usb] Apr 8 08:34:39 fuzz kernel: [18725.806343] Call Trace: Apr 8 08:34:39 fuzz kernel: [18725.806350] [C1FD3EF0] [DA850054] prism2sta_commsqual_defer+0x54/0xf0 [prism2_usb] (unreliable) Apr 8 08:34:39 fuzz kernel: [18725.806380] [C1FD3F00] [DA850550] prism2sta_processing_defer+0x460/0x5e0 [prism2_usb] Apr 8 08:34:39 fuzz kernel: [18725.806408] [C1FD3F60] [C0040A98] worker_thread+0x188/0x230 Apr 8 08:34:39 fuzz kernel: [18725.806427] [C1FD3FC0] [C00463A8] kthread+0x108/0x110 Apr 8 08:34:39 fuzz kernel: [18725.806445] [C1FD3FF0] [C00128F8] kernel_thread+0x44/0x60 Apr 8 08:34:39 fuzz kernel: [18725.806465] Instruction dump: Apr 8 08:34:39 fuzz kernel: [18725.806473] 2f830000 3c60da86 388495cc 3863a75c 409e0064 3d20c02b 815f0be4 81690624 Apr 8 08:34:39 fuzz kernel: [18725.806494] 312affff 7c095110 396b00fa 917f0bec <0f000000> 80880008 7d034378 48007479 -- oops in prism2_usb from 2.6.15-20 https://launchpad.net/malone/bugs/38691 From toojays at toojays.net Sat Apr 8 07:40:41 2006 From: toojays at toojays.net (John Steele Scott) Date: Sat, 08 Apr 2006 07:40:41 -0000 Subject: [Bug 38691] Re: oops in prism2_usb from 2.6.15-20 References: <20060408073925.32233.43866.malonedeb@gandwana.ubuntu.com> Message-ID: <20060408074041.24486.27052.malone@gangotri.ubuntu.com> I should add that I have used this interface since with no problems; i.e. I haven't been able to reproduce this again. -- oops in prism2_usb from 2.6.15-20 https://launchpad.net/malone/bugs/38691 From crimsun at fungus.sh.nu Sat Apr 8 08:17:05 2006 From: crimsun at fungus.sh.nu (Daniel T. Chen) Date: Sat, 08 Apr 2006 08:17:05 -0000 Subject: [Bug 28544] Re: kernel BUG at net/ieee80211/ieee80211_geo.c:81! (2.6.15-12.17) References: <20060114143449.6048.12639.malonedeb@gangotri.ubuntu.com> Message-ID: <20060408081705.24486.51427.malone@gangotri.ubuntu.com> Closing this bug, please reopen if original issue is reproducible with current Dapper. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: In Progress => Fix Released -- kernel BUG at net/ieee80211/ieee80211_geo.c:81! (2.6.15-12.17) https://launchpad.net/malone/bugs/28544 From crimsun at fungus.sh.nu Sat Apr 8 08:21:40 2006 From: crimsun at fungus.sh.nu (Daniel T. Chen) Date: Sat, 08 Apr 2006 08:21:40 -0000 Subject: [Bug 28840] Re: rhythmbox dies when trying to play to USB soundcard References: <20060118004501.25106.26702.malonedeb@gangotri.ubuntu.com> Message-ID: <20060408082140.24486.53765.malone@gangotri.ubuntu.com> Are either of these usb sound devices plugged into a usb hub? -- rhythmbox dies when trying to play to USB soundcard https://launchpad.net/malone/bugs/28840 From crimsun at fungus.sh.nu Sat Apr 8 08:27:03 2006 From: crimsun at fungus.sh.nu (Daniel T. Chen) Date: Sat, 08 Apr 2006 08:27:03 -0000 Subject: [Bug 30014] Re: Sound is muted by default on Vaio FS115 with HDA/RealTek References: <20060129215006.9306.97651.malonedeb@gandwana.ubuntu.com> Message-ID: <20060408082703.32313.11950.malone@gandwana.ubuntu.com> Please attach output from ``lspci -v && lspci -nv && tail -2 /proc/asound/oss/sndstat && amixer -c0''. -- Sound is muted by default on Vaio FS115 with HDA/RealTek https://launchpad.net/malone/bugs/30014 From luizhcamargo at gmail.com Sat Apr 8 08:36:16 2006 From: luizhcamargo at gmail.com (Luiz Henrique) Date: Sat, 08 Apr 2006 08:36:16 -0000 Subject: [Bug 36040] Inaudible sound for snd-ali5451 after dist-upgrade from Hoary to Breezy References: <20060322175928.4578.34558.malonedeb@gandwana.ubuntu.com> Message-ID: <20060408083616.32233.64901.launchpad@canonical@gandwana.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Assignee: Ben Collins Status: Needs Info Description: I upgraded my PC and bought an ASUS K8U-X Motherboard. By the time I was still using Hoary, the sound "Just Worked". Then, after installing Breezy, the sound wasn't working anymore. I think it must a newer kernels' incompatibility. Not even on Dapper Flight 4 it works. The soundcard is an AD1888 with it's ALi M5455 chipset controller. This is the #cat /proc/asound/cards 0 [M5455 ]: ICH - ALi M5455 ALi M5455 with AD1888 at 0x0, irq 18 This was done on a custom install. Hoary's base (via server install) with Breezy apps. Thanks. Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Assignee: Ben Collins Status: Needs Info Description: I upgraded my PC and bought an ASUS K8U-X Motherboard. By the time I was still using Hoary, the sound "Just Worked". Then, after installing Breezy, the sound wasn't working anymore. I think it must a newer kernels' incompatibility. Not even on Dapper Flight 4 it works. The soundcard is an AD1888 with it's ALi M5455 chipset controller. This is the #cat /proc/asound/cards 0 [M5455 ]: ICH - ALi M5455 ALi M5455 with AD1888 at 0x0, irq 18 This was done on a custom install. Hoary's base (via server install) with Breezy apps. Thanks. -- Inaudible sound for snd-ali5451 after dist-upgrade from Hoary to Breezy https://launchpad.net/malone/bugs/36040 From crimsun at fungus.sh.nu Sat Apr 8 08:35:59 2006 From: crimsun at fungus.sh.nu (Daniel T. Chen) Date: Sat, 08 Apr 2006 08:35:59 -0000 Subject: [Bug 36040] Re: Inaudible sound for snd-ali5451 after dist-upgrade from Hoary to Breezy References: <20060322175928.4578.34558.malonedeb@gandwana.ubuntu.com> Message-ID: <20060408083559.32233.32183.malone@gandwana.ubuntu.com> Please test with current Dapper. ** Changed in: alsa-driver (Ubuntu) Assignee: Ubuntu Audio Team => Ben Collins Status: Unconfirmed => Needs Info ** Changed in: alsa-driver (Ubuntu) Sourcepackagename: alsa-driver => linux-source-2.6.15 -- Inaudible sound for snd-ali5451 after dist-upgrade from Hoary to Breezy https://launchpad.net/malone/bugs/36040 From elitepenguin at gmx.net Sat Apr 8 09:13:02 2006 From: elitepenguin at gmx.net (Nils) Date: Sat, 08 Apr 2006 09:13:02 -0000 Subject: [Bug 38702] sound does not work References: <20060408091302.32233.60251.malonedeb@gandwana.ubuntu.com> Message-ID: <20060408091302.32233.60251.malonedeb@gandwana.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 linux-image-2.6.15-20-686 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: I updated to linux-image-2.6.15-20-686 and noticed that the sound does not work anymore. I also tried to kill esd and write some stuff manually to /dev/dsp. But I didn't hear anything. Not beeing able to figure out why I don't hear anything I rebooted with linux-image-2.6.15-19-686, then sound worked again. My sound chip: 0000:00:1b.0 0403: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 01) -- sound does not work https://launchpad.net/malone/bugs/38702 From casualprogrammer at yahoo.com Sat Apr 8 09:46:47 2006 From: casualprogrammer at yahoo.com (casualprogrammer) Date: Sat, 08 Apr 2006 09:46:47 -0000 Subject: [Bug 36339] Re: USB mouse does not work if usbhid loaded before plugging in References: <20060324035730.5352.52525.malonedeb@gangotri.ubuntu.com> Message-ID: <20060408094647.32233.93125.malone@gandwana.ubuntu.com> I currently use a workaround for this issue, which might be acceptable for the rest of you: In "/etc/modprobe.d/blacklist" find: # these drivers are very simple, the HID drivers are usually preferred blacklist usbmouse blacklist usbkbd add blacklist usbhid and comment out the entries for usbmouse / usbkbd as needed. I.e. # these drivers are very simple, the HID drivers are usually preferred #blacklist usbmouse blacklist usbkbd blacklist usbhid -- USB mouse does not work if usbhid loaded before plugging in https://launchpad.net/malone/bugs/36339 From simon at swat.me.uk Sat Apr 8 09:46:52 2006 From: simon at swat.me.uk (Simon Watson) Date: Sat, 08 Apr 2006 09:46:52 -0000 Subject: [Bug 28840] Re: rhythmbox dies when trying to play to USB soundcard References: <20060118004501.25106.26702.malonedeb@gangotri.ubuntu.com> Message-ID: <20060408094652.32313.81618.malone@gandwana.ubuntu.com> Yes - it was, and it did resolve itself when plugged directly into the computer. But obviously, the device did work in windows when plugged into the USB hub -- rhythmbox dies when trying to play to USB soundcard https://launchpad.net/malone/bugs/28840 From chantry.xavier at gmail.com Sat Apr 8 10:27:10 2006 From: chantry.xavier at gmail.com (Xavier) Date: Sat, 08 Apr 2006 10:27:10 -0000 Subject: [Bug 38278] Re: wifi card don't work. isl3886 is required but not installed References: <20060405203926.24486.7083.malonedeb@gangotri.ubuntu.com> Message-ID: <20060408102710.24486.57256.malone@gangotri.ubuntu.com> And 38238. Maybe islsm_pci should be removed until things are fixed, this driver was added in the 20 kernel, right? -- wifi card don't work. isl3886 is required but not installed https://launchpad.net/malone/bugs/38278 From chantry.xavier at gmail.com Sat Apr 8 10:31:12 2006 From: chantry.xavier at gmail.com (Xavier) Date: Sat, 08 Apr 2006 10:31:12 -0000 Subject: [Bug 38673] Re: prism54 driver requires new firmware name References: <20060407232751.24516.74228.malonedeb@gangotri.ubuntu.com> Message-ID: <20060408103112.32313.91381.malone@gandwana.ubuntu.com> *** This bug is a duplicate of bug 38278 *** This bug has already been reported three times, please check before posting. However, I tried to copy isl3890 to isl3886 as well, but it didn't work (using 2.6.15-19, it works fine again) ** This bug has been marked a duplicate of bug 38278 wifi card don't work. isl3886 is required but not installed -- prism54 driver requires new firmware name https://launchpad.net/malone/bugs/38673 From chantry.xavier at gmail.com Sat Apr 8 10:33:10 2006 From: chantry.xavier at gmail.com (Xavier) Date: Sat, 08 Apr 2006 10:33:10 -0000 Subject: [Bug 38278] Re: wifi card don't work. isl3886 is required but not installed References: <20060405203926.24486.7083.malonedeb@gangotri.ubuntu.com> Message-ID: <20060408103310.32233.54354.launchpad@gandwana.ubuntu.com> ** Bug 38673 has been marked a duplicate of this bug ** Bug 38238 has been marked a duplicate of this bug -- wifi card don't work. isl3886 is required but not installed https://launchpad.net/malone/bugs/38278 From chantry.xavier at gmail.com Sat Apr 8 10:35:01 2006 From: chantry.xavier at gmail.com (Xavier) Date: Sat, 08 Apr 2006 10:35:01 -0000 Subject: [Bug 38238] Re: prism54 no longer works References: <20060405180221.24486.72499.malonedeb@gangotri.ubuntu.com> Message-ID: <20060408103501.24516.31097.launchpad@gangotri.ubuntu.com> *** This bug is a duplicate of bug 38278 *** ** This bug has been marked a duplicate of bug 38278 wifi card don't work. isl3886 is required but not installed -- prism54 no longer works https://launchpad.net/malone/bugs/38238 From exidefix at gmail.com Sat Apr 8 11:28:21 2006 From: exidefix at gmail.com (IdefiX666) Date: Sat, 08 Apr 2006 11:28:21 -0000 Subject: [Bug 38693] kubuntu install error: 4294675.149000 ohci1394: fw-host0: SelfID recived outside of bus reset sequence References: <20060408080343.24486.99839.malonedeb@gangotri.ubuntu.com> Message-ID: <20060408112821.24516.47615.launchpad@canonical@gangotri.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: Hi. I have just downloaded newest kubuntu, and I have problem installing it... After I try to install this error shows: Uncompressing Linux... OK, booting Kernel 4294675.149000 ohci1394: fw-host0: SelfID recived outside of bus reset sequence athlon-xp 2000+ AbitNF7-SL mobo 512 ram Audigy 2 ZS sound card I was browsing the internet, and i thing that it is somethinf with fire-wire controler... I have 2 fire wire controlers... one is in mother board, and second is in my audigy sound card. When I disable motherboard fire-wire suportin bios that error dont show 4294675.149000 ohci1394: fw-host0: SelfID reacived outside of bus reset sequence but id stopping at "Uncompressing Linux... OK, booting Kernel" I reall need help... I can's slove this myself... Ps: I'm running "dapper-dvd-i386.iso 03-Apr-2006 21:16 3.0G " THX in advance Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: Hi. I have just downloaded newest kubuntu, and I have problem installing it... After I try to install this error shows: Uncompressing Linux... OK, booting Kernel 4294675.149000 ohci1394: fw-host0: SelfID recived outside of bus reset sequence athlon-xp 2000+ AbitNF7-SL mobo 512 ram Audigy 2 ZS sound card I was browsing the internet, and i thing that it is somethinf with fire-wire controler... I have 2 fire wire controlers... one is in mother board, and second is in my audigy sound card. When I disable motherboard fire-wire suportin bios that error dont show 4294675.149000 ohci1394: fw-host0: SelfID reacived outside of bus reset sequence but id stopping at "Uncompressing Linux... OK, booting Kernel" I reall need help... I can's slove this myself... Ps: I'm running "dapper-dvd-i386.iso 03-Apr-2006 21:16 3.0G " THX in advance -- kubuntu install error: 4294675.149000 ohci1394: fw-host0: SelfID recived outside of bus reset sequence https://launchpad.net/malone/bugs/38693 From dennis at kaarsemaker.net Sat Apr 8 11:28:21 2006 From: dennis at kaarsemaker.net (Dennis Kaarsemaker) Date: Sat, 08 Apr 2006 11:28:21 -0000 Subject: [Bug 38693] Re: kubuntu install error: 4294675.149000 ohci1394: fw-host0: SelfID recived outside of bus reset sequence References: <20060408080343.24486.99839.malonedeb@gangotri.ubuntu.com> Message-ID: <20060408112821.24516.16600.malone@gangotri.ubuntu.com> A new Ubuntu kernel was released a day after that iso was built. Please try the latest install cd. ** Changed in: kubuntu-meta kubuntu-desktop (Ubuntu) Sourcepackagename: kubuntu-meta => linux-source-2.6.15 Binarypackagename: kubuntu-desktop => None -- kubuntu install error: 4294675.149000 ohci1394: fw-host0: SelfID recived outside of bus reset sequence https://launchpad.net/malone/bugs/38693 From dennis at kaarsemaker.net Sat Apr 8 11:25:12 2006 From: dennis at kaarsemaker.net (Dennis Kaarsemaker) Date: Sat, 08 Apr 2006 11:25:12 -0000 Subject: [Bug 38689] Re: [Bug 38689] sky2 network driver issue References: <20060408071427.32313.1607.malonedeb@gandwana.ubuntu.com> Message-ID: <1144495512.5369.72.camel@mirage> > Currently I am running the kernel version 2.6.15-16-386. Please upgrade to the latest Ubuntu packages and try again. -- sky2 network driver issue https://launchpad.net/malone/bugs/38689 From steve at secomputing.co.uk Sat Apr 8 13:29:09 2006 From: steve at secomputing.co.uk (Stephen English) Date: Sat, 08 Apr 2006 13:29:09 -0000 Subject: [Bug 38238] Re: prism54 no longer works References: <20060405180221.24486.72499.malonedeb@gangotri.ubuntu.com> Message-ID: <20060408132909.32313.21551.malone@gandwana.ubuntu.com> *** This bug is a duplicate of bug 38278 *** Same here with fully up-to-date packages as of 2006-04-08 14:25. Symlinking firmware/2.6.15-20-386/isl3890 to firmware/isl3886 also fails with: Apr 8 14:27:11 localhost kernel: [4295969.441000] islusb: Request firmware for 'isl3886' failed: -2 Apr 8 14:27:11 localhost kernel: [4295969.442000] eth2: could not upload firmware ('isl3886') Apr 8 14:27:11 localhost kernel: [4295969.442000] eth2: islpci_reset: failure Apr 8 14:27:11 localhost kernel: [4295969.495000] islusb: unable to boot device Apr 8 14:27:11 localhost firmware_helper[6192]: main: error loading '/lib/firmware/isl3886' for device '/class/firmware/0000:02:03.0' with driver 'islsm_pci' -- prism54 no longer works https://launchpad.net/malone/bugs/38238 From igor4u at gmail.com Sat Apr 8 13:26:59 2006 From: igor4u at gmail.com (Igor Zubarev) Date: Sat, 08 Apr 2006 13:26:59 -0000 Subject: [Bug 30014] Re: [Bug 30014] Re: Sound is muted by default on Vaio FS115 with HDA/RealTek References: <20060129215006.9306.97651.malonedeb@gandwana.ubuntu.com> <20060408082703.32313.11950.malone@gandwana.ubuntu.com> Message-ID: <277109730604080626k41c14572rab7fa14198114d89@mail.gmail.com> 2006/4/8, Daniel T. Chen : > > Please attach output from ``lspci -v && lspci -nv && tail -2 > /proc/asound/oss/sndstat && amixer -c0''. > -- > Sound is muted by default on Vaio FS115 with HDA/RealTek > https://launchpad.net/malone/bugs/30014 > ubuntu at ubuntu:~$ lspci -v 0000:00:00.0 Host bridge: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller (rev 03) Subsystem: Sony Corporation: Unknown device 81b7 Flags: bus master, fast devsel, latency 0 Capabilities: 0000:00:01.0 PCI bridge: Intel Corporation Mobile 915GM/PM Express PCI Express Root Port (rev 03) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 Memory behind bridge: 90000000-afffffff Prefetchable memory behind bridge: c0000000-cfffffff Capabilities: 0000:00:1b.0 0403: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller (rev 04) Subsystem: Sony Corporation: Unknown device 81bb Flags: bus master, fast devsel, latency 0, IRQ 169 Memory at 80000000 (64-bit, non-prefetchable) [size=16K] Capabilities: 0000:00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 04) (prog-if 00 [UHCI]) Subsystem: Sony Corporation: Unknown device 81b9 Flags: bus master, medium devsel, latency 0, IRQ 201 I/O ports at 1800 [size=32] 0000:00:1d.1 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 04) (prog-if 00 [UHCI]) Subsystem: Sony Corporation: Unknown device 81b9 Flags: bus master, medium devsel, latency 0, IRQ 209 I/O ports at 1820 [size=32] 0000:00:1d.2 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 04) (prog-if 00 [UHCI]) Subsystem: Sony Corporation: Unknown device 81b9 Flags: bus master, medium devsel, latency 0, IRQ 193 I/O ports at 1840 [size=32] 0000:00:1d.3 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 (rev 04) (prog-if 00 [UHCI]) Subsystem: Sony Corporation: Unknown device 81b9 Flags: bus master, medium devsel, latency 0, IRQ 169 I/O ports at 1860 [size=32] 0000:00:1d.7 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 04) (prog-if 20 [EHCI]) Subsystem: Sony Corporation: Unknown device 81b9 Flags: bus master, medium devsel, latency 0, IRQ 201 Memory at 80004000 (32-bit, non-prefetchable) [size=1K] Capabilities: 0000:00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev d4) (prog-if 01 [Subtractive decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=06, subordinate=07, sec-latency=32 I/O behind bridge: 00002000-00002fff Memory behind bridge: b0000000-b00fffff Prefetchable memory behind bridge: 0000000030000000-0000000031f00000 Capabilities: 0000:00:1f.0 ISA bridge: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge (rev 04) Subsystem: Sony Corporation: Unknown device 81b9 Flags: bus master, medium devsel, latency 0 0000:00:1f.1 IDE interface: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) IDE Controller (rev 04) (prog-if 8a [Master SecP PriP]) Subsystem: Sony Corporation: Unknown device 81b9 Flags: bus master, medium devsel, latency 0, IRQ 193 I/O ports at I/O ports at I/O ports at I/O ports at I/O ports at 1880 [size=16] 0000:00:1f.3 SMBus: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller (rev 04) Subsystem: Sony Corporation: Unknown device 81b9 Flags: medium devsel, IRQ 10 I/O ports at 18a0 [size=32] 0000:01:00.0 VGA compatible controller: nVidia Corporation GeForce Go 6200 TurboCache (rev a1) (prog-if 00 [VGA]) Subsystem: Sony Corporation: Unknown device 81c2 Flags: bus master, fast devsel, latency 0, IRQ 169 Memory at a0000000 (32-bit, non-prefetchable) [size=16M] Memory at c0000000 (64-bit, prefetchable) [size=256M] Memory at 90000000 (64-bit, non-prefetchable) [size=16M] Expansion ROM at 91000000 [disabled] [size=128K] Capabilities: 0000:06:03.0 CardBus bridge: Texas Instruments PCI7420 CardBus Controller Subsystem: Sony Corporation: Unknown device 818f Flags: bus master, medium devsel, latency 168, IRQ 169 Memory at b0008000 (32-bit, non-prefetchable) [size=4K] Bus: primary=06, secondary=07, subordinate=0a, sec-latency=176 Memory window 0: 30000000-31fff000 (prefetchable) Memory window 1: 32000000-33fff000 I/O window 0: 00002400-000024ff I/O window 1: 00002800-000028ff 16-bit legacy interface ports at 0001 0000:06:03.2 FireWire (IEEE 1394): Texas Instruments PCI7x20 1394a-2000 OHCI Two-Port PHY/Link-Layer Controller (prog-if 10 [OHCI]) Subsystem: Sony Corporation: Unknown device 818f Flags: bus master, medium devsel, latency 32, IRQ 193 Memory at b0004000 (32-bit, non-prefetchable) [size=2K] Memory at b0000000 (32-bit, non-prefetchable) [size=16K] Capabilities: 0000:06:03.3 Mass storage controller: Texas Instruments PCI7420/PCI7620 Dual Socket CardBus and Smart Card Cont. w/ 1394a-2000 OHCI Two-Port PHY/Link-Layer Cont. an Subsystem: Sony Corporation: Unknown device 8190 Flags: medium devsel, IRQ 4 Memory at b0005000 (32-bit, non-prefetchable) [size=4K] Capabilities: 0000:06:04.0 Network controller: Intel Corporation PRO/Wireless 2200BG (rev 05) Subsystem: Intel Corporation: Unknown device 2753 Flags: bus master, medium devsel, latency 32, IRQ 225 Memory at b0006000 (32-bit, non-prefetchable) [size=4K] Capabilities: 0000:06:08.0 Ethernet controller: Intel Corporation 82562ET/EZ/GT/GZ - PRO/100 VE (LOM) Ethernet Controller Mobile (rev 04) Subsystem: Sony Corporation: Unknown device 81d0 Flags: bus master, medium devsel, latency 66, IRQ 217 Memory at b0007000 (32-bit, non-prefetchable) [size=4K] I/O ports at 2000 [size=64] Capabilities: ubuntu at ubuntu:~$ lspci -nv 0000:00:00.0 0600: 8086:2590 (rev 03) Subsystem: 104d:81b7 Flags: bus master, fast devsel, latency 0 Capabilities: 0000:00:01.0 0604: 8086:2591 (rev 03) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 Memory behind bridge: 90000000-afffffff Prefetchable memory behind bridge: c0000000-cfffffff Capabilities: 0000:00:1b.0 0403: 8086:2668 (rev 04) Subsystem: 104d:81bb Flags: bus master, fast devsel, latency 0, IRQ 169 Memory at 80000000 (64-bit, non-prefetchable) [size=16K] Capabilities: 0000:00:1d.0 0c03: 8086:2658 (rev 04) Subsystem: 104d:81b9 Flags: bus master, medium devsel, latency 0, IRQ 201 I/O ports at 1800 [size=32] 0000:00:1d.1 0c03: 8086:2659 (rev 04) Subsystem: 104d:81b9 Flags: bus master, medium devsel, latency 0, IRQ 209 I/O ports at 1820 [size=32] 0000:00:1d.2 0c03: 8086:265a (rev 04) Subsystem: 104d:81b9 Flags: bus master, medium devsel, latency 0, IRQ 193 I/O ports at 1840 [size=32] 0000:00:1d.3 0c03: 8086:265b (rev 04) Subsystem: 104d:81b9 Flags: bus master, medium devsel, latency 0, IRQ 169 I/O ports at 1860 [size=32] 0000:00:1d.7 0c03: 8086:265c (rev 04) (prog-if 20) Subsystem: 104d:81b9 Flags: bus master, medium devsel, latency 0, IRQ 201 Memory at 80004000 (32-bit, non-prefetchable) [size=1K] Capabilities: 0000:00:1e.0 0604: 8086:2448 (rev d4) (prog-if 01) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=06, subordinate=07, sec-latency=32 I/O behind bridge: 00002000-00002fff Memory behind bridge: b0000000-b00fffff Prefetchable memory behind bridge: 0000000030000000-0000000031f00000 Capabilities: 0000:00:1f.0 0601: 8086:2641 (rev 04) Subsystem: 104d:81b9 Flags: bus master, medium devsel, latency 0 0000:00:1f.1 0101: 8086:266f (rev 04) (prog-if 8a [Master SecP PriP]) Subsystem: 104d:81b9 Flags: bus master, medium devsel, latency 0, IRQ 193 I/O ports at I/O ports at I/O ports at I/O ports at I/O ports at 1880 [size=16] 0000:00:1f.3 0c05: 8086:266a (rev 04) Subsystem: 104d:81b9 Flags: medium devsel, IRQ 10 I/O ports at 18a0 [size=32] 0000:01:00.0 0300: 10de:0167 (rev a1) Subsystem: 104d:81c2 Flags: bus master, fast devsel, latency 0, IRQ 169 Memory at a0000000 (32-bit, non-prefetchable) [size=16M] Memory at c0000000 (64-bit, prefetchable) [size=256M] Memory at 90000000 (64-bit, non-prefetchable) [size=16M] Expansion ROM at 91000000 [disabled] [size=128K] Capabilities: 0000:06:03.0 0607: 104c:ac8e Subsystem: 104d:818f Flags: bus master, medium devsel, latency 168, IRQ 169 Memory at b0008000 (32-bit, non-prefetchable) [size=4K] Bus: primary=06, secondary=07, subordinate=0a, sec-latency=176 Memory window 0: 30000000-31fff000 (prefetchable) Memory window 1: 32000000-33fff000 I/O window 0: 00002400-000024ff I/O window 1: 00002800-000028ff 16-bit legacy interface ports at 0001 0000:06:03.2 0c00: 104c:802e (prog-if 10) Subsystem: 104d:818f Flags: bus master, medium devsel, latency 32, IRQ 193 Memory at b0004000 (32-bit, non-prefetchable) [size=2K] Memory at b0000000 (32-bit, non-prefetchable) [size=16K] Capabilities: 0000:06:03.3 0180: 104c:ac8f Subsystem: 104d:8190 Flags: medium devsel, IRQ 4 Memory at b0005000 (32-bit, non-prefetchable) [size=4K] Capabilities: 0000:06:04.0 0280: 8086:4220 (rev 05) Subsystem: 8086:2753 Flags: bus master, medium devsel, latency 32, IRQ 225 Memory at b0006000 (32-bit, non-prefetchable) [size=4K] Capabilities: 0000:06:08.0 0200: 8086:1068 (rev 04) Subsystem: 104d:81d0 Flags: bus master, medium devsel, latency 66, IRQ 217 Memory at b0007000 (32-bit, non-prefetchable) [size=4K] I/O ports at 2000 [size=64] Capabilities: ubuntu at ubuntu:~$ tail -2 /proc/asound/oss/sndstat Mixers: 0: Realtek ALC260 ubuntu at ubuntu:~$ amixer -c0 Simple mixer control 'Headphone',0 Capabilities: pvolume pswitch Playback channels: Front Left - Front Right Limits: Playback 0 - 64 Mono: Front Left: Playback 45 [70%] [on] Front Right: Playback 45 [70%] [on] Simple mixer control 'PCM',0 Capabilities: pvolume Playback channels: Front Left - Front Right Limits: Playback 0 - 255 Mono: Front Left: Playback 255 [100%] Front Right: Playback 255 [100%] Simple mixer control 'Front',0 Capabilities: pvolume pswitch Playback channels: Front Left - Front Right Limits: Playback 0 - 64 Mono: Front Left: Playback 0 [0%] [off] Front Right: Playback 0 [0%] [off] Simple mixer control 'Front Mic',0 Capabilities: pvolume pswitch Playback channels: Front Left - Front Right Limits: Playback 0 - 65 Mono: Front Left: Playback 35 [54%] [off] Front Right: Playback 35 [54%] [off] Simple mixer control 'Line',0 Capabilities: pvolume pswitch Playback channels: Front Left - Front Right Limits: Playback 0 - 65 Mono: Front Left: Playback 0 [0%] [on] Front Right: Playback 0 [0%] [on] Simple mixer control 'CD',0 Capabilities: pvolume pswitch Playback channels: Front Left - Front Right Limits: Playback 0 - 65 Mono: Front Left: Playback 52 [80%] [on] Front Right: Playback 52 [80%] [on] Simple mixer control 'Mic',0 Capabilities: pvolume pswitch Playback channels: Front Left - Front Right Limits: Playback 0 - 65 Mono: Front Left: Playback 0 [0%] [off] Front Right: Playback 0 [0%] [off] Simple mixer control 'PC Speaker',0 Capabilities: pvolume pswitch Playback channels: Front Left - Front Right Limits: Playback 0 - 65 Mono: Front Left: Playback 35 [54%] [off] Front Right: Playback 35 [54%] [off] Simple mixer control 'Mono',0 Capabilities: pvolume pvolume-joined pswitch pswitch-joined Playback channels: Mono Limits: Playback 0 - 65 Mono: Playback 0 [0%] [off] Simple mixer control 'Capture',0 Capabilities: cvolume cswitch Capture channels: Front Left - Front Right Limits: Capture 0 - 35 Front Left: Capture 0 [0%] [on] Front Right: Capture 0 [0%] [on] Simple mixer control 'Capture',1 Capabilities: cvolume cswitch Capture channels: Front Left - Front Right Limits: Capture 0 - 35 Front Left: Capture 0 [0%] [on] Front Right: Capture 0 [0%] [on] Simple mixer control 'Input Source',0 Capabilities: enum Items: 'Mic' 'Front Mic' 'Line' 'CD' Item0: 'Mic' Simple mixer control 'Input Source',1 Capabilities: enum Items: 'Mic' 'Front Mic' 'Line' 'CD' Item0: 'Mic' ubuntu at ubuntu:~$ -- Sound is muted by default on Vaio FS115 with HDA/RealTek https://launchpad.net/malone/bugs/30014 From bastian.doetsch at gmx.de Sat Apr 8 13:31:24 2006 From: bastian.doetsch at gmx.de (Bastian Doetsch) Date: Sat, 08 Apr 2006 13:31:24 -0000 Subject: [Bug 38731] Cannot delete on external FAT USB Drive References: <20060408133124.32313.1153.malonedeb@gandwana.ubuntu.com> Message-ID: <20060408133124.32313.1153.malonedeb@gandwana.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Major Priority: (none set) Status: Unconfirmed Description: Hi, I'm running dapper with the most current updates (...on the german mirror...). uname -a returns the following: Linux basti 2.6.15-20-k7 #1 SMP PREEMPT Tue Apr 4 19:26:13 UTC 2006 i686 GNU/Linux Unfortunately, as I tried to delete something from my external usb harddrive, it just panicked and switched to read-only mode. here the dmesg output (of several tries, including mounting, unmounting) [4294733.329000] ISO 9660 Extensions: Microsoft Joliet Level 3 [4294733.466000] ISOFS: changing to secondary root [4294734.065000] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! [4294825.545000] FAT: Filesystem panic (dev sde1) [4294825.545000] fat_free_clusters: deleting FAT entry beyond EOF [4294825.545000] File system has been set read-only [4295143.017000] usb 5-2: reset high speed USB device using ehci_hcd and address 3 [4295164.063000] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! [4295194.165000] usb 5-2: reset high speed USB device using ehci_hcd and address 3 [4295195.268000] usb 5-2: device descriptor read/64, error -71 [4295236.210000] FAT: Filesystem panic (dev sde1) [4295236.210000] fat_free_clusters: deleting FAT entry beyond EOF [4295236.210000] File system has been set read-only [4295276.428000] Warning: /proc/ide/hd?/settings interface is obsolete, and will be removed soon! [4295276.730000] NTFS driver 2.1.25 [Flags: R/O MODULE]. [4295276.772000] NTFS volume version 3.1. lsusb shows the following for the drive (a philips SPD5110CC): Bus 005 Device 003: ID 0471:0829 Philips ** Changed in: linux-source-2.6.15 (Ubuntu) Severity: Normal => Major -- Cannot delete on external FAT USB Drive https://launchpad.net/malone/bugs/38731 From igor4u at gmail.com Sat Apr 8 13:33:41 2006 From: igor4u at gmail.com (Igor Zubarev) Date: Sat, 08 Apr 2006 13:33:41 -0000 Subject: [Bug 30014] Re: [Bug 30014] Sound is muted by default References: <20060129215006.9306.97651.malonedeb@gandwana.ubuntu.com> Message-ID: <277109730604080633n5de22555i7fab5e9f1f780b86@mail.gmail.com> After trying Live CD Dapper Flight 6: ubuntu at ubuntu:~$ lspci -v 0000:00:00.0 Host bridge: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller (rev 03) Subsystem: Sony Corporation: Unknown device 81b7 Flags: bus master, fast devsel, latency 0 Capabilities: 0000:00:01.0 PCI bridge: Intel Corporation Mobile 915GM/PM Express PCI Express Root Port (rev 03) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 Memory behind bridge: 90000000-afffffff Prefetchable memory behind bridge: c0000000-cfffffff Capabilities: 0000:00:1b.0 0403: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller (rev 04) Subsystem: Sony Corporation: Unknown device 81bb Flags: bus master, fast devsel, latency 0, IRQ 169 Memory at 80000000 (64-bit, non-prefetchable) [size=16K] Capabilities: 0000:00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 04) (prog-if 00 [UHCI]) Subsystem: Sony Corporation: Unknown device 81b9 Flags: bus master, medium devsel, latency 0, IRQ 201 I/O ports at 1800 [size=32] 0000:00:1d.1 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 04) (prog-if 00 [UHCI]) Subsystem: Sony Corporation: Unknown device 81b9 Flags: bus master, medium devsel, latency 0, IRQ 209 I/O ports at 1820 [size=32] 0000:00:1d.2 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 04) (prog-if 00 [UHCI]) Subsystem: Sony Corporation: Unknown device 81b9 Flags: bus master, medium devsel, latency 0, IRQ 193 I/O ports at 1840 [size=32] 0000:00:1d.3 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 (rev 04) (prog-if 00 [UHCI]) Subsystem: Sony Corporation: Unknown device 81b9 Flags: bus master, medium devsel, latency 0, IRQ 169 I/O ports at 1860 [size=32] 0000:00:1d.7 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 04) (prog-if 20 [EHCI]) Subsystem: Sony Corporation: Unknown device 81b9 Flags: bus master, medium devsel, latency 0, IRQ 201 Memory at 80004000 (32-bit, non-prefetchable) [size=1K] Capabilities: 0000:00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev d4) (prog-if 01 [Subtractive decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=06, subordinate=07, sec-latency=32 I/O behind bridge: 00002000-00002fff Memory behind bridge: b0000000-b00fffff Prefetchable memory behind bridge: 0000000030000000-0000000031f00000 Capabilities: 0000:00:1f.0 ISA bridge: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge (rev 04) Subsystem: Sony Corporation: Unknown device 81b9 Flags: bus master, medium devsel, latency 0 0000:00:1f.1 IDE interface: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) IDE Controller (rev 04) (prog-if 8a [Master SecP PriP]) Subsystem: Sony Corporation: Unknown device 81b9 Flags: bus master, medium devsel, latency 0, IRQ 193 I/O ports at I/O ports at I/O ports at I/O ports at I/O ports at 1880 [size=16] 0000:00:1f.3 SMBus: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller (rev 04) Subsystem: Sony Corporation: Unknown device 81b9 Flags: medium devsel, IRQ 10 I/O ports at 18a0 [size=32] 0000:01:00.0 VGA compatible controller: nVidia Corporation GeForce Go 6200 TurboCache (rev a1) (prog-if 00 [VGA]) Subsystem: Sony Corporation: Unknown device 81c2 Flags: bus master, fast devsel, latency 0, IRQ 169 Memory at a0000000 (32-bit, non-prefetchable) [size=16M] Memory at c0000000 (64-bit, prefetchable) [size=256M] Memory at 90000000 (64-bit, non-prefetchable) [size=16M] Expansion ROM at 91000000 [disabled] [size=128K] Capabilities: 0000:06:03.0 CardBus bridge: Texas Instruments PCI7420 CardBus Controller Subsystem: Sony Corporation: Unknown device 818f Flags: bus master, medium devsel, latency 168, IRQ 169 Memory at b0008000 (32-bit, non-prefetchable) [size=4K] Bus: primary=06, secondary=07, subordinate=0a, sec-latency=176 Memory window 0: 30000000-31fff000 (prefetchable) Memory window 1: 32000000-33fff000 I/O window 0: 00002400-000024ff I/O window 1: 00002800-000028ff 16-bit legacy interface ports at 0001 0000:06:03.2 FireWire (IEEE 1394): Texas Instruments PCI7x20 1394a-2000 OHCI Two-Port PHY/Link-Layer Controller (prog-if 10 [OHCI]) Subsystem: Sony Corporation: Unknown device 818f Flags: bus master, medium devsel, latency 32, IRQ 193 Memory at b0004000 (32-bit, non-prefetchable) [size=2K] Memory at b0000000 (32-bit, non-prefetchable) [size=16K] Capabilities: 0000:06:03.3 Mass storage controller: Texas Instruments PCI7420/PCI7620 Dual Socket CardBus and Smart Card Cont. w/ 1394a-2000 OHCI Two-Port PHY/Link-Layer Cont. an Subsystem: Sony Corporation: Unknown device 8190 Flags: medium devsel, IRQ 4 Memory at b0005000 (32-bit, non-prefetchable) [size=4K] Capabilities: 0000:06:04.0 Network controller: Intel Corporation PRO/Wireless 2200BG (rev 05) Subsystem: Intel Corporation: Unknown device 2753 Flags: bus master, medium devsel, latency 32, IRQ 225 Memory at b0006000 (32-bit, non-prefetchable) [size=4K] Capabilities: 0000:06:08.0 Ethernet controller: Intel Corporation 82562ET/EZ/GT/GZ - PRO/100 VE (LOM) Ethernet Controller Mobile (rev 04) Subsystem: Sony Corporation: Unknown device 81d0 Flags: bus master, medium devsel, latency 66, IRQ 217 Memory at b0007000 (32-bit, non-prefetchable) [size=4K] I/O ports at 2000 [size=64] Capabilities: ubuntu at ubuntu:~$ lspci -nv 0000:00:00.0 0600: 8086:2590 (rev 03) Subsystem: 104d:81b7 Flags: bus master, fast devsel, latency 0 Capabilities: 0000:00:01.0 0604: 8086:2591 (rev 03) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 Memory behind bridge: 90000000-afffffff Prefetchable memory behind bridge: c0000000-cfffffff Capabilities: 0000:00:1b.0 0403: 8086:2668 (rev 04) Subsystem: 104d:81bb Flags: bus master, fast devsel, latency 0, IRQ 169 Memory at 80000000 (64-bit, non-prefetchable) [size=16K] Capabilities: 0000:00:1d.0 0c03: 8086:2658 (rev 04) Subsystem: 104d:81b9 Flags: bus master, medium devsel, latency 0, IRQ 201 I/O ports at 1800 [size=32] 0000:00:1d.1 0c03: 8086:2659 (rev 04) Subsystem: 104d:81b9 Flags: bus master, medium devsel, latency 0, IRQ 209 I/O ports at 1820 [size=32] 0000:00:1d.2 0c03: 8086:265a (rev 04) Subsystem: 104d:81b9 Flags: bus master, medium devsel, latency 0, IRQ 193 I/O ports at 1840 [size=32] 0000:00:1d.3 0c03: 8086:265b (rev 04) Subsystem: 104d:81b9 Flags: bus master, medium devsel, latency 0, IRQ 169 I/O ports at 1860 [size=32] 0000:00:1d.7 0c03: 8086:265c (rev 04) (prog-if 20) Subsystem: 104d:81b9 Flags: bus master, medium devsel, latency 0, IRQ 201 Memory at 80004000 (32-bit, non-prefetchable) [size=1K] Capabilities: 0000:00:1e.0 0604: 8086:2448 (rev d4) (prog-if 01) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=06, subordinate=07, sec-latency=32 I/O behind bridge: 00002000-00002fff Memory behind bridge: b0000000-b00fffff Prefetchable memory behind bridge: 0000000030000000-0000000031f00000 Capabilities: 0000:00:1f.0 0601: 8086:2641 (rev 04) Subsystem: 104d:81b9 Flags: bus master, medium devsel, latency 0 0000:00:1f.1 0101: 8086:266f (rev 04) (prog-if 8a [Master SecP PriP]) Subsystem: 104d:81b9 Flags: bus master, medium devsel, latency 0, IRQ 193 I/O ports at I/O ports at I/O ports at I/O ports at I/O ports at 1880 [size=16] 0000:00:1f.3 0c05: 8086:266a (rev 04) Subsystem: 104d:81b9 Flags: medium devsel, IRQ 10 I/O ports at 18a0 [size=32] 0000:01:00.0 0300: 10de:0167 (rev a1) Subsystem: 104d:81c2 Flags: bus master, fast devsel, latency 0, IRQ 169 Memory at a0000000 (32-bit, non-prefetchable) [size=16M] Memory at c0000000 (64-bit, prefetchable) [size=256M] Memory at 90000000 (64-bit, non-prefetchable) [size=16M] Expansion ROM at 91000000 [disabled] [size=128K] Capabilities: 0000:06:03.0 0607: 104c:ac8e Subsystem: 104d:818f Flags: bus master, medium devsel, latency 168, IRQ 169 Memory at b0008000 (32-bit, non-prefetchable) [size=4K] Bus: primary=06, secondary=07, subordinate=0a, sec-latency=176 Memory window 0: 30000000-31fff000 (prefetchable) Memory window 1: 32000000-33fff000 I/O window 0: 00002400-000024ff I/O window 1: 00002800-000028ff 16-bit legacy interface ports at 0001 0000:06:03.2 0c00: 104c:802e (prog-if 10) Subsystem: 104d:818f Flags: bus master, medium devsel, latency 32, IRQ 193 Memory at b0004000 (32-bit, non-prefetchable) [size=2K] Memory at b0000000 (32-bit, non-prefetchable) [size=16K] Capabilities: 0000:06:03.3 0180: 104c:ac8f Subsystem: 104d:8190 Flags: medium devsel, IRQ 4 Memory at b0005000 (32-bit, non-prefetchable) [size=4K] Capabilities: 0000:06:04.0 0280: 8086:4220 (rev 05) Subsystem: 8086:2753 Flags: bus master, medium devsel, latency 32, IRQ 225 Memory at b0006000 (32-bit, non-prefetchable) [size=4K] Capabilities: 0000:06:08.0 0200: 8086:1068 (rev 04) Subsystem: 104d:81d0 Flags: bus master, medium devsel, latency 66, IRQ 217 Memory at b0007000 (32-bit, non-prefetchable) [size=4K] I/O ports at 2000 [size=64] Capabilities: ubuntu at ubuntu:~$ tail -2 /proc/asound/oss/sndstat Mixers: 0: Realtek ALC260 ubuntu at ubuntu:~$ amixer -c0 Simple mixer control 'Headphone',0 Capabilities: pvolume pswitch Playback channels: Front Left - Front Right Limits: Playback 0 - 64 Mono: Front Left: Playback 45 [70%] [on] Front Right: Playback 45 [70%] [on] Simple mixer control 'PCM',0 Capabilities: pvolume Playback channels: Front Left - Front Right Limits: Playback 0 - 255 Mono: Front Left: Playback 255 [100%] Front Right: Playback 255 [100%] Simple mixer control 'Front',0 Capabilities: pvolume pswitch Playback channels: Front Left - Front Right Limits: Playback 0 - 64 Mono: Front Left: Playback 0 [0%] [off] Front Right: Playback 0 [0%] [off] Simple mixer control 'Front Mic',0 Capabilities: pvolume pswitch Playback channels: Front Left - Front Right Limits: Playback 0 - 65 Mono: Front Left: Playback 35 [54%] [off] Front Right: Playback 35 [54%] [off] Simple mixer control 'Line',0 Capabilities: pvolume pswitch Playback channels: Front Left - Front Right Limits: Playback 0 - 65 Mono: Front Left: Playback 0 [0%] [on] Front Right: Playback 0 [0%] [on] Simple mixer control 'CD',0 Capabilities: pvolume pswitch Playback channels: Front Left - Front Right Limits: Playback 0 - 65 Mono: Front Left: Playback 52 [80%] [on] Front Right: Playback 52 [80%] [on] Simple mixer control 'Mic',0 Capabilities: pvolume pswitch Playback channels: Front Left - Front Right Limits: Playback 0 - 65 Mono: Front Left: Playback 0 [0%] [off] Front Right: Playback 0 [0%] [off] Simple mixer control 'PC Speaker',0 Capabilities: pvolume pswitch Playback channels: Front Left - Front Right Limits: Playback 0 - 65 Mono: Front Left: Playback 35 [54%] [off] Front Right: Playback 35 [54%] [off] Simple mixer control 'Mono',0 Capabilities: pvolume pvolume-joined pswitch pswitch-joined Playback channels: Mono Limits: Playback 0 - 65 Mono: Playback 0 [0%] [off] Simple mixer control 'Capture',0 Capabilities: cvolume cswitch Capture channels: Front Left - Front Right Limits: Capture 0 - 35 Front Left: Capture 0 [0%] [on] Front Right: Capture 0 [0%] [on] Simple mixer control 'Capture',1 Capabilities: cvolume cswitch Capture channels: Front Left - Front Right Limits: Capture 0 - 35 Front Left: Capture 0 [0%] [on] Front Right: Capture 0 [0%] [on] Simple mixer control 'Input Source',0 Capabilities: enum Items: 'Mic' 'Front Mic' 'Line' 'CD' Item0: 'Mic' Simple mixer control 'Input Source',1 Capabilities: enum Items: 'Mic' 'Front Mic' 'Line' 'CD' Item0: 'Mic' ubuntu at ubuntu:~$ -- Sound is muted by default on Vaio FS115 with HDA/RealTek https://launchpad.net/malone/bugs/30014 From zulcss at gmail.com Sat Apr 8 13:53:54 2006 From: zulcss at gmail.com (zul) Date: Sat, 08 Apr 2006 13:53:54 -0000 Subject: [Bug 35444] Re: Computer freezes with nvidia-glx and via-rhine References: <20060318090243.12186.10868.malonedeb@gandwana.ubuntu.com> Message-ID: <20060408135354.24486.49344.launchpad@gangotri.ubuntu.com> ** Summary changed: - freeze + Computer freezes with nvidia-glx and via-rhine -- Computer freezes with nvidia-glx and via-rhine https://launchpad.net/malone/bugs/35444 From aleksander at lukasiewicz.org Sat Apr 8 13:51:22 2006 From: aleksander at lukasiewicz.org (Laestrygo) Date: Sat, 08 Apr 2006 13:51:22 -0000 Subject: [Bug 34870] Re: ipw2200 repeatedly crashes. References: <20060314104909.30082.87848.malonedeb@gandwana.ubuntu.com> Message-ID: <20060408135123.24486.64731.launchpad@gangotri.ubuntu.com> ** Attachment added: "It still crashes in Flight 6" http://librarian.launchpad.net/1983970/messages.txt -- ipw2200 repeatedly crashes. https://launchpad.net/malone/bugs/34870 From amantia at freemail.hu Sat Apr 8 14:25:28 2006 From: amantia at freemail.hu (Andras Mantia) Date: Sat, 08 Apr 2006 14:25:28 -0000 Subject: [Bug 38160] Include ASUS AC97 workaround References: <20060405103435.14649.98856.malonedeb@gandwana.ubuntu.com> Message-ID: <20060408142528.24486.75651.launchpad@canonical@gangotri.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Fix Committed Description: VT8237 based boards that have an onboard sound card tend to disable the sound card if a PCI sound card is installed. There is a simple workaround (pci/quirks.c patch) that enables the onboard card at boot time that can be found on the linux kernel mailing list (search for ASUS A8V Deluxe). Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Fix Committed Description: VT8237 based boards that have an onboard sound card tend to disable the sound card if a PCI sound card is installed. There is a simple workaround (pci/quirks.c patch) that enables the onboard card at boot time that can be found on the linux kernel mailing list (search for ASUS A8V Deluxe). -- Include ASUS AC97 workaround https://launchpad.net/malone/bugs/38160 From zulcss at gmail.com Sat Apr 8 14:25:28 2006 From: zulcss at gmail.com (zul) Date: Sat, 08 Apr 2006 14:25:28 -0000 Subject: [Bug 38160] Re: Include ASUS AC97 workaround References: <20060405103435.14649.98856.malonedeb@gandwana.ubuntu.com> Message-ID: <20060408142528.24486.20874.malone@gangotri.ubuntu.com> Have sent patch already. ** Changed in: Ubuntu Sourcepackagename: None => linux-source-2.6.15 Status: Unconfirmed => Fix Committed -- Include ASUS AC97 workaround https://launchpad.net/malone/bugs/38160 From fmccormick at videotron.ca Sat Apr 8 14:25:39 2006 From: fmccormick at videotron.ca (Frank McCormick) Date: Sat, 08 Apr 2006 14:25:39 -0000 Subject: [Bug 38026] Re: Dapper won't boot under 686 kernel References: <20060404133858.23082.93873.malonedeb@gandwana.ubuntu.com> Message-ID: <20060408142539.32233.79708.malone@gandwana.ubuntu.com> NOAPIC on the kernel command line allow the 686 kernel to boot. I guess you can close this bug -- Dapper won't boot under 686 kernel https://launchpad.net/malone/bugs/38026 From david.latreyte at wanadoo.fr Sat Apr 8 14:28:34 2006 From: david.latreyte at wanadoo.fr (Dl) Date: Sat, 08 Apr 2006 14:28:34 -0000 Subject: [Bug 37182] Re: 2.6.15.* kernels fail to boot on amd machine with nvidia chipset References: <20060329155808.7863.44273.malonedeb@gangotri.ubuntu.com> Message-ID: <20060408142834.32233.37118.malone@gandwana.ubuntu.com> >>Fixed in -20.30 correct. Thank you -- 2.6.15.* kernels fail to boot on amd machine with nvidia chipset https://launchpad.net/malone/bugs/37182 From david.latreyte at wanadoo.fr Sat Apr 8 14:29:56 2006 From: david.latreyte at wanadoo.fr (Dl) Date: Sat, 08 Apr 2006 14:29:56 -0000 Subject: [Bug 37182] Re: [Bug 37182] Re: 2.6.15.* kernels fail to boot on amd machine with nvidia chipset References: <20060329155808.7863.44273.malonedeb@gangotri.ubuntu.com> <20060407032757.24486.67343.malone@gangotri.ubuntu.com> Message-ID: <200604081629.56718.david.latreyte@wanadoo.fr> Le Vendredi 7 Avril 2006 05:27, Ben Collins a écrit : > Fixed in -20.30 > > ** Changed in: linux-source-2.6.15 (Ubuntu) > Status: Unconfirmed => Fix Released thank you. I've just tested it. ----- Latreyte David -- 2.6.15.* kernels fail to boot on amd machine with nvidia chipset https://launchpad.net/malone/bugs/37182 From milo_casagrande at yahoo.it Sat Apr 8 15:03:46 2006 From: milo_casagrande at yahoo.it (MiloCasagrande) Date: Sat, 08 Apr 2006 15:03:46 -0000 Subject: [Bug 24153] Re: ACPI on ASUS L4500R doesn't work, the CPU frequency scaling works, battery and backlight switch don't References: <20060113142735.21012.49495.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060408150346.32233.48714.malone@gandwana.ubuntu.com> Update to 2.6.16-20 but ACPI still doesn't work... -- ACPI on ASUS L4500R doesn't work, the CPU frequency scaling works, battery and backlight switch don't https://launchpad.net/malone/bugs/24153 From dennis at kaarsemaker.net Sat Apr 8 15:08:02 2006 From: dennis at kaarsemaker.net (Dennis Kaarsemaker) Date: Sat, 08 Apr 2006 15:08:02 -0000 Subject: [Bug 2962] Re: [Bug 2962] Output From acpi -V References: <20051008140639.14682.11809.malonedeb@gangotri.ubuntu.com> <20060406192938.32313.40523.malone@gandwana.ubuntu.com> Message-ID: <1144508882.5369.115.camel@mirage> Dapper has 2 battery applets, as you may have noticed: gnome-power-manager and the traditional battstat applet. Are both failing? If not: which one is failing? -- Register of Power Status Change Requires Removal & Reinsertion of Battery https://launchpad.net/malone/bugs/2962 From ivan.matveich at gmail.com Sat Apr 8 15:19:43 2006 From: ivan.matveich at gmail.com (Ivan Matveich) Date: Sat, 08 Apr 2006 15:19:43 -0000 Subject: [Bug 38329] I confirm this bug w/ latest dapper + ibook g4 12" References: <20060406063622.24516.46464.malonedeb@gangotri.ubuntu.com> Message-ID: <20060408151943.32233.11194.malone@gandwana.ubuntu.com> Except I restart the interface with "ifup"; your iwconfig rate workaround does not work for me. I also have to restart /etc/init.d/pbbuttonsd because my "notap" touchpad preference is forgotten during suspend. And the gnome batter-status indicator displays a "suspend failed" message even though the suspend did not fail, for some reason. These two latter bugs are probably connected. -- bcm43xx needs manual treatment after resume https://launchpad.net/malone/bugs/38329 From ivan.matveich at gmail.com Sat Apr 8 15:27:03 2006 From: ivan.matveich at gmail.com (Ivan Matveich) Date: Sat, 08 Apr 2006 15:27:03 -0000 Subject: [Bug 37112] I confirm this: ibook g4 12" References: <20060329032925.6253.87634.malonedeb@gandwana.ubuntu.com> Message-ID: <20060408152703.24516.20868.malone@gangotri.ubuntu.com> I had to /etc/init.d/pbbuttonsd restart in my /etc/apm/resume.d/. And for some reason my gnome battery-status indicator says "suspend failed" after I resume. Weird. -- iBook G4, on resume from sleep, enables touch-to-click despite my preferences https://launchpad.net/malone/bugs/37112 From ivan.matveich at gmail.com Sat Apr 8 15:32:17 2006 From: ivan.matveich at gmail.com (Ivan Matveich) Date: Sat, 08 Apr 2006 15:32:17 -0000 Subject: [Bug 36525] rate 54M works for me w/ ibook g4 12" References: <20060325040432.6253.74364.malonedeb@gandwana.ubuntu.com> Message-ID: <20060408153217.32233.30302.malone@gandwana.ubuntu.com> /etc/network/interfaces stanza: auto wireless iface wireless inet static address 192.168.2.2 netmask 255.255.255.0 gateway 192.168.2.1 dns-nameservers 192.168.1.1 wireless-essid TV wireless-rate 54M wireless-channel 10 up iwlist scan stanza for access point (atheros card): auto wireless iface wireless inet static address 192.168.2.1 netmask 255.255.255.0 wireless-essid TV wireless-mode Master wireless-rate 54M wireless-channel 10 pre-up iwpriv wireless mode 3 -- bcm43xx Driver only works @ 11Mb/s https://launchpad.net/malone/bugs/36525 From ivan.matveich at gmail.com Sat Apr 8 15:39:24 2006 From: ivan.matveich at gmail.com (Ivan Matveich) Date: Sat, 08 Apr 2006 15:39:24 -0000 Subject: [Bug 38752] bcm43xx does not associate unless "iwlist scan" is invoked. References: <20060408153924.32313.6926.malonedeb@gandwana.ubuntu.com> Message-ID: <20060408153924.32313.6926.malonedeb@gandwana.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: My bcm43xx (ibook g4 12") does not associate with the access point (ie, packets go nowhere) unless I run "iwlist scan" after bringing up the interface. /etc/network/interfaces stanza: auto wireless iface wireless inet static address 192.168.2.2 netmask 255.255.255.0 gateway 192.168.2.1 dns-nameservers 192.168.1.1 wireless-essid TV wireless-rate 54M wireless-channel 10 up iwlist scan The "up iwlist scan" makes it work obviously. access point is atheros on ubuntu-dapper-current: auto wireless iface wireless inet static address 192.168.2.1 netmask 255.255.255.0 wireless-essid TV wireless-mode Master wireless-rate 54M wireless-channel 10 pre-up iwpriv wireless mode 3 -- bcm43xx does not associate unless "iwlist scan" is invoked. https://launchpad.net/malone/bugs/38752 From manuelsspace-registros at yahoo.com Sat Apr 8 15:40:23 2006 From: manuelsspace-registros at yahoo.com (manuel) Date: Sat, 08 Apr 2006 15:40:23 -0000 Subject: [Bug 33162] Re: Acer Travel Mate 3210 needs acpi=off References: <20060228154534.17498.22123.malonedeb@gangotri.ubuntu.com> Message-ID: <20060408154023.32313.253.malone@gandwana.ubuntu.com> I've downloaded latest release Flight 6 - released Mar 31 2006 and it fail again. I've to add “acpi=off” The exact machine is Acer TravelMate 3210WXCi There are some Travelmates which has additional Acer's effort to be Windows exclusive, for example, the reported model now has the WLan turned off until W$ enable it, previous models start w/it turned on and the problem exist only after the kill switch was pressed. -- Acer Travel Mate 3210 needs acpi=off https://launchpad.net/malone/bugs/33162 From antonio.distante at gmail.com Sat Apr 8 16:13:34 2006 From: antonio.distante at gmail.com (Antonio Distante) Date: Sat, 08 Apr 2006 16:13:34 -0000 Subject: [Bug 23682] Re: No input from microphone on ALI5451 References: <20060113142504.21012.99258.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060408161334.24516.43310.malone@gangotri.ubuntu.com> Latest gstreamer update fixed the problem. Thanks -- No input from microphone on ALI5451 https://launchpad.net/malone/bugs/23682 From dennis at kaarsemaker.net Sat Apr 8 16:36:36 2006 From: dennis at kaarsemaker.net (Dennis Kaarsemaker) Date: Sat, 08 Apr 2006 16:36:36 -0000 Subject: [Bug 26075] Re: [Bug 26075] Re: HP Pavilion dv1000 laptop wireless button will not enable and disable wireless References: <20060113144745.21012.65346.launchpad@macquarie.warthogs.hbd.com> <20060405131134.14572.1567.malone@gandwana.ubuntu.com> Message-ID: <1144514196.3414.9.camel@mirage> Susan, that's different hardware so a different bug. -- HP Pavilion dv1000 laptop wireless button will not enable and disable wireless https://launchpad.net/malone/bugs/26075 From mats at wichmann.us Sat Apr 8 17:16:23 2006 From: mats at wichmann.us (Mats Wichmann) Date: Sat, 08 Apr 2006 17:16:23 -0000 Subject: [Bug 38760] ata timeout with sony vgn-s580 laptop References: <20060408171624.24516.54726.malonedeb@gangotri.ubuntu.com> Message-ID: <20060408171624.24516.54726.malonedeb@gangotri.ubuntu.com> Public bug reported: Affects: linux-meta (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: Filing bug details per request on https://launchpad.net/distros/ubuntu/+ticket/577. Shortly after boot, this laptop (Sony VGN-S580, also known as the VGN- S5M outside the USA) crashes with a disk problem. Since it's a SATA disk and there are lots of other problems reported on such combinations this would seem to be a possible culprit, for example see notes here, Thinkpad-specific: http://www.thinkwiki.org/wiki/Problems_with_SATA_and_Linux. I'm able to run this laptop successfully using Fedora Core 5, but the Dapper kernel (currently have 2.6.15-19-686) fails as follows: ata1: handling error/timeout ata1: port reset, p_is 0 is 0 pis 0 cmd 4017 tf d0 ss 113 se 0 ata1: status=0x50 { DriveReady SeekComplete } sda: Current: sense key: No Sense Additional sense: No additional sense information The system is completely dead and I cannot capture more information at this point. Since the FC5 installation works, I've been able to maintain Dapper in a chroot on a separate partition and am able to do tests on request. I'm pasting a couple of lspci captures per the request in ticket 577: 1. lspci -vv from FC5: 00:00.0 Host bridge: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller (rev 03) Subsystem: Sony Corporation Unknown device 81b7 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- 00:02.0 VGA compatible controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 03) (prog-if 00 [VGA]) Subsystem: Sony Corporation Unknown device 81b8 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- 00:02.1 Display controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 03) Subsystem: Sony Corporation Unknown device 81b8 Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- 00:1b.0 Audio device: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller (rev 03) Subsystem: Sony Corporation Unknown device 81cc Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- 00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 03) (prog-if 00 [UHCI]) Subsystem: Sony Corporation Unknown device 81b9 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev d3) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- TAbort- Reset- FastB2B- Capabilities: 00:1f.0 ISA bridge: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge (rev 03) Subsystem: Sony Corporation Unknown device 81b9 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- Region 1: I/O ports at Region 2: I/O ports at Region 3: I/O ports at Region 4: I/O ports at 1810 [size=16] 00:1f.2 IDE interface: Intel Corporation 82801FBM (ICH6M) SATA Controller (rev 03) (prog-if 8f [Master SecP SecO PriP PriO]) Subsystem: Sony Corporation Unknown device 81ba Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- 00:1f.3 SMBus: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller (rev 03) Subsystem: Sony Corporation Unknown device 81b9 Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- Reset+ 16bInt+ PostWrite+ 16-bit legacy interface ports at 0001 06:05.2 FireWire (IEEE 1394): Texas Instruments PCI7x20 1394a-2000 OHCI Two-Port PHY/Link-Layer Controller (prog-if 10 [OHCI]) Subsystem: Sony Corporation Unknown device 818f Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- 06:05.3 Mass storage controller: Subsystem: Sony Corporation Unknown device 8190 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- 06:08.0 Ethernet controller: Intel Corporation 82562ET/EZ/GT/GZ - PRO/100 VE (LOM) Ethernet Controller Mobile (rev 03) Subsystem: Sony Corporation Unknown device 81d0 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- 06:0b.0 Network controller: Intel Corporation PRO/Wireless 2915ABG MiniPCI Adapter (rev 05) Subsystem: Intel Corporation Unknown device 1050 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- ================================= 2. lspci -vv from Dapper, single-user mode (in the 30 seconds or so before it crashes) 0000:00:00.0 Host bridge: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller (rev 03) Subsystem: Sony Corporation: Unknown device 81b7 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- Reset- FastB2B- Capabilities: [50] #0d [0000] 0000:00:1f.0 ISA bridge: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge (rev 03) Subsystem: Sony Corporation: Unknown device 81b9 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- Region 1: I/O ports at Region 2: I/O ports at Region 3: I/O ports at Region 4: I/O ports at 1810 [size=16] 0000:00:1f.2 IDE interface: Intel Corporation 82801FBM (ICH6M) SATA Controller (rev 03) (prog-if 8f [Master SecP SecO PriP PriO]) Subsystem: Sony Corporation: Unknown device 81ba Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- TAbort- SERR- Reset+ 16bInt+ PostWrite+ 16-bit legacy interface ports at 0001 0000:06:05.2 FireWire (IEEE 1394): Texas Instruments PCI7x20 1394a-2000 OHCI Two-Port PHY/Link-Layer Controller (prog-if 10 [OHCI]) Subsystem: Sony Corporation: Unknown device 818f Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- Message-ID: <20060408171602.32233.65478.malone@gandwana.ubuntu.com> Now this gets complicated and I may need help. The applet which is failing was added to my top panel under /Add to Panel/System & Hardware/Battery Charge Monitor. I have just loaded gnome-power-manager but I cannot find out how to add the icon to my panel. Under /System/Preferences/Power Preferences/Advanced I have Display Main Icon ticked but cannot see it. Can someone help me out here? Ed Almos -- Register of Power Status Change Requires Removal & Reinsertion of Battery https://launchpad.net/malone/bugs/2962 From susancragin at earthlink.net Sat Apr 8 17:51:51 2006 From: susancragin at earthlink.net (susancragin) Date: Sat, 08 Apr 2006 17:51:51 -0000 Subject: [Bug 38766] Wireless not properly detected. References: <20060408175151.24516.78847.malonedeb@gangotri.ubuntu.com> Message-ID: <20060408175151.24516.78847.malonedeb@gangotri.ubuntu.com> Public bug reported: Affects: ndiswrapper (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: Acer Ferrari 4005 laptop with Broadcom 802.11g network adapter. On load, both wireless card and lan are detected, but wireless config does not find my (unsecure) wireless network. I can load Ubuntu with wired connection no problem, but still cannot configure wireless. On/off button does not work and no icon appears on screen to add WLAN0 or whatever, per instruction below. http://ccsd.msoe.edu/faq/linux/Ubuntu.jsp?IDFaq=223 Maybe I am doing it wrong, but there seems to be a problem. -- Wireless not properly detected. https://launchpad.net/malone/bugs/38766 From susancragin at earthlink.net Sat Apr 8 18:04:27 2006 From: susancragin at earthlink.net (susancragin) Date: Sat, 08 Apr 2006 18:04:27 -0000 Subject: [Bug 38766] Re: Wireless not properly detected. References: <20060408175151.24516.78847.malonedeb@gangotri.ubuntu.com> Message-ID: <20060408180427.24486.6373.launchpad@gangotri.ubuntu.com> ** Description changed: Acer Ferrari 4005 laptop with Broadcom 802.11g network adapter. + Location: PCI bus 6, device 2, function 0 On load, both wireless card and lan are detected, but wireless config does not find my (unsecure) wireless network. I can load Ubuntu with wired connection no problem, but still cannot configure wireless. On/off button does not work and no icon appears on screen to add WLAN0 or whatever, per instruction below. http://ccsd.msoe.edu/faq/linux/Ubuntu.jsp?IDFaq=223 Maybe I am doing it wrong, but there seems to be a problem. -- Wireless not properly detected. https://launchpad.net/malone/bugs/38766 From dennis at kaarsemaker.net Sat Apr 8 18:07:31 2006 From: dennis at kaarsemaker.net (Dennis Kaarsemaker) Date: Sat, 08 Apr 2006 18:07:31 -0000 Subject: [Bug 2962] Re: [Bug 2962] Re: Register of Power Status Change Requires Removal & Reinsertion of Battery References: <20051008140639.14682.11809.malonedeb@gangotri.ubuntu.com> <20060408171602.32233.65478.malone@gandwana.ubuntu.com> Message-ID: <1144519651.3414.21.camel@mirage> What's the value of /apps/gnome-power-manager/display_icon_policy -- Register of Power Status Change Requires Removal & Reinsertion of Battery https://launchpad.net/malone/bugs/2962 From dennis at kaarsemaker.net Sat Apr 8 18:16:22 2006 From: dennis at kaarsemaker.net (Dennis Kaarsemaker) Date: Sat, 08 Apr 2006 18:16:22 -0000 Subject: [Bug 37659] Re: [Bug 37659] The IPAQ module does not support WinCE Smart-phones References: <20060402001620.23733.73589.malonedeb@gandwana.ubuntu.com> Message-ID: <1144520182.3414.23.camel@mirage> Can you please try the -20 kernel? -- The IPAQ module does not support WinCE Smart-phones https://launchpad.net/malone/bugs/37659 From specialboy.johnson at gmail.com Sat Apr 8 18:40:48 2006 From: specialboy.johnson at gmail.com (Specialboy) Date: Sat, 08 Apr 2006 18:40:48 -0000 Subject: [Bug 34259] Re: [Bug 34259] Re: [Bug 34259] Re: [Bug 34259] Re: flashing waiting mouse with NVIDIA drivers References: <20060309234822.28582.64475.malonedeb@gandwana.ubuntu.com> <20060407190925.24516.84808.malone@gangotri.ubuntu.com> <1144452275.5369.30.camel@mirage> Message-ID: okay, fair enough, no skin off my nose.... On 4/8/06, Dennis Kaarsemaker wrote: > > Sorry, but if you cannot test it or give information, we can do nothing > but close this report. > > status Rejected > > > ** Changed in: nvidia-glx (Ubuntu) > Status: Needs Info => Rejected > -- > flashing waiting mouse with NVIDIA drivers > https://launchpad.net/malone/bugs/34259 > -- flashing waiting mouse with NVIDIA drivers https://launchpad.net/malone/bugs/34259 From burner at suppressingfire.org Sat Apr 8 19:07:26 2006 From: burner at suppressingfire.org (Michael R. Head) Date: Sat, 08 Apr 2006 19:07:26 -0000 Subject: [Bug 38109] Re: [dapper] g4-based Mac Mini's bcm43xx wireless fails to work References: <20060405013409.25542.83349.malonedeb@gangotri.ubuntu.com> Message-ID: <20060408190726.32233.27509.malone@gandwana.ubuntu.com> Somehow it's now somewhat working. I'm submitting this bug report comment via a the wireless connection. I can now often get network-manager to get a proper IP address over DHCP (though sometimes it times out and gives me an autoip address). One problem that remains is that it is still unable to measure signal strength, so when connected, nm-applet shows four blank bars even though I'm 10 feet from the transmitter. -- [dapper] g4-based Mac Mini's bcm43xx wireless fails to work https://launchpad.net/malone/bugs/38109 From jsestri2 at uiuc.edu Sat Apr 8 19:27:11 2006 From: jsestri2 at uiuc.edu (JJ) Date: Sat, 08 Apr 2006 19:27:11 -0000 Subject: [Bug 38689] Re: sky2 network driver issue References: <20060408071427.32313.1607.malonedeb@gandwana.ubuntu.com> Message-ID: <20060408192711.24516.96328.malone@gangotri.ubuntu.com> I ran the full upgrade this morning, and within 40 minutes of stress it failed on me again. The latest packages did not fix my problems. -- sky2 network driver issue https://launchpad.net/malone/bugs/38689 From ribs at riblet.plus.com Sat Apr 8 19:30:16 2006 From: ribs at riblet.plus.com (Richard Brooklyn) Date: Sat, 08 Apr 2006 19:30:16 -0000 Subject: [Bug 37695] Re: Kernel 2.6.15-19-amd64-k8 fails to boot References: <20060402082811.5415.84396.malonedeb@gangotri.ubuntu.com> Message-ID: <20060408193016.24486.36145.malone@gangotri.ubuntu.com> 2.6.15-20 has been released which fixes this bug. -- Kernel 2.6.15-19-amd64-k8 fails to boot https://launchpad.net/malone/bugs/37695 From punkrockguy318 at comcast.net Sat Apr 8 19:44:30 2006 From: punkrockguy318 at comcast.net (Lukas Sabota) Date: Sat, 08 Apr 2006 19:44:30 -0000 Subject: [Bug 38780] Floppy module NOT loaded References: <20060408194430.24486.53632.malonedeb@gangotri.ubuntu.com> Message-ID: <20060408194430.24486.53632.malonedeb@gangotri.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: Floppies currently do not mount in Dapper. The floppy driver must be loaded manually before any floppies will be mounted. Why isn't the floppy module loaded when a floppy drive is detected? -- Floppy module NOT loaded https://launchpad.net/malone/bugs/38780 From dennis at kaarsemaker.net Sat Apr 8 19:59:53 2006 From: dennis at kaarsemaker.net (Dennis Kaarsemaker) Date: Sat, 08 Apr 2006 19:59:53 -0000 Subject: [Bug 38780] Re: [Bug 38780] Floppy module NOT loaded References: <20060408194430.24486.53632.malonedeb@gangotri.ubuntu.com> Message-ID: <1144526393.3414.32.camel@mirage> Are you using the latest (2.6.15-20) kernel? -- Floppy module NOT loaded https://launchpad.net/malone/bugs/38780 From cyrilb856 at gmail.com Sat Apr 8 20:11:59 2006 From: cyrilb856 at gmail.com (marseillai) Date: Sat, 08 Apr 2006 20:11:59 -0000 Subject: [Bug 37589] Re: cannot mount usb hard drive when it's in sleep mode References: <20060401130538.23707.51582.malonedeb@gandwana.ubuntu.com> Message-ID: <20060408201159.32233.43128.malone@gandwana.ubuntu.com> After test it doesn't work on this fresh df6 install ... -- cannot mount usb hard drive when it's in sleep mode https://launchpad.net/malone/bugs/37589 From mihai.ile at gmail.com Sat Apr 8 20:19:18 2006 From: mihai.ile at gmail.com (mihai007) Date: Sat, 08 Apr 2006 20:19:18 -0000 Subject: [Bug 29498] Re: Acer Ferrari 4005 Fails to resume from suspend to RAM References: <20060123232219.15826.52517.malonedeb@gandwana.ubuntu.com> Message-ID: <20060408201918.32233.29535.malone@gandwana.ubuntu.com> Acer Aspire 1694wlmi same stuff. someone a fix? -- Acer Ferrari 4005 Fails to resume from suspend to RAM https://launchpad.net/malone/bugs/29498 From edal at freestart.hu Sat Apr 8 20:20:09 2006 From: edal at freestart.hu (edal) Date: Sat, 08 Apr 2006 20:20:09 -0000 Subject: [Bug 2962] Re: Register of Power Status Change Requires References: <20051008140639.14682.11809.malonedeb@gangotri.ubuntu.com> Message-ID: <33267410.1144527609653.JavaMail.www-data@www2> Hi Dennis Rather than fill the bug list with my troubles please could you tell me where to find this file? I do not have a subdirectory off root called /apps. Once I find the file I will post a reply to the bug list 2006.04.08. 19:07-kor Dennis Kaarsemaker írta: > What's the value of /apps/gnome-power-manager/display_icon_policy > -- > Register of Power Status Change Requires Removal & Reinsertion of Battery > https://launchpad.net/malone/bugs/2962 ____________________________________________________________________ Miert fizetsz az internetert? Korlatlan, ingyenes internet hozzaferes a FreeStarttol Probald ki most! http://www.freestart.hu -- Register of Power Status Change Requires Removal & Reinsertion of Battery https://launchpad.net/malone/bugs/2962 From dennis at kaarsemaker.net Sat Apr 8 20:51:15 2006 From: dennis at kaarsemaker.net (Dennis Kaarsemaker) Date: Sat, 08 Apr 2006 20:51:15 -0000 Subject: [Bug 2962] Re: [Bug 2962] Re: Register of Power Status Change Requires References: <20051008140639.14682.11809.malonedeb@gangotri.ubuntu.com> <33267410.1144527609653.JavaMail.www-data@www2> Message-ID: <1144529475.3414.47.camel@mirage> Sorry, I meant in gconf (gconf-editor). If you set the value to always, the icon definitely should be visible. -- Register of Power Status Change Requires Removal & Reinsertion of Battery https://launchpad.net/malone/bugs/2962 From sitsofe at yahoo.com Sat Apr 8 21:37:03 2006 From: sitsofe at yahoo.com (Sitsofe Wheeler) Date: Sat, 08 Apr 2006 21:37:03 -0000 Subject: [Bug 38780] Re: Floppy module NOT loaded References: <20060408194430.24486.53632.malonedeb@gangotri.ubuntu.com> Message-ID: <20060408213703.32313.16968.launchpad@gandwana.ubuntu.com> ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Unconfirmed => Needs Info -- Floppy module NOT loaded https://launchpad.net/malone/bugs/38780 From sitsofe at yahoo.com Sat Apr 8 21:42:30 2006 From: sitsofe at yahoo.com (Sitsofe Wheeler) Date: Sat, 08 Apr 2006 21:42:30 -0000 Subject: [Bug 38731] Re: Cannot delete on external FAT USB Drive References: <20060408133124.32313.1153.malonedeb@gandwana.ubuntu.com> Message-ID: <20060408214230.32313.22335.malone@gandwana.ubuntu.com> This looks like your USB key's filesytem has become corrupt. You can try recovering it but assuming you don't need the data on it you are better off reformatting it... -- Cannot delete on external FAT USB Drive https://launchpad.net/malone/bugs/38731 From dennis at kaarsemaker.net Sat Apr 8 21:42:05 2006 From: dennis at kaarsemaker.net (Dennis Kaarsemaker) Date: Sat, 08 Apr 2006 21:42:05 -0000 Subject: [Bug 38689] Re: sky2 network driver issue References: <20060408071427.32313.1607.malonedeb@gandwana.ubuntu.com> Message-ID: <20060408214205.32313.80964.malone@gandwana.ubuntu.com> Thanks for testing. ** Changed in: linux-meta linux-386 (Ubuntu) Sourcepackagename: linux-meta => linux-source-2.6.15 Binarypackagename: linux-386 => None -- sky2 network driver issue https://launchpad.net/malone/bugs/38689 From dgerard at gmail.com Sat Apr 8 21:41:29 2006 From: dgerard at gmail.com (David Gerard) Date: Sat, 08 Apr 2006 21:41:29 -0000 Subject: [Bug 29971] Re: Ubuntu doesn't detect and install my wireless orinoco_usb chipset References: <20060129095757.9344.91081.malonedeb@gandwana.ubuntu.com> Message-ID: <20060408214129.32233.923.malone@gandwana.ubuntu.com> I was sent here to report this as a bug ... I can confirm this. This is (a) important because the W200 is the standard wifi for the Compaq laptops with Multiport adapter on the lid (N400c, N410c, N600c, N610c, some others) (b) at the moment there's no support except if you compile orinoco_usb yourself (c) if you do, it works perfectly. The adapter itself is an Orinoco chipset. orinoco_pci works for this, but the W200 uses USB. The Orinoco project does support this, but they consider it beta at best. However, it's the *only* way to get this module to work. And following the wiki page instructions work well for me. Suggested solution: include a precompiled orinoco_usb module, per directions on the wiki page, and this adapter will Just Work. I'm currently running Breezy on my N410c, but can use a Dapper liveCD to confirm a fix if you can't find anyone else with a W200. -- Ubuntu doesn't detect and install my wireless orinoco_usb chipset https://launchpad.net/malone/bugs/29971 From ralphsmail at btinternet.com Sat Apr 8 21:52:28 2006 From: ralphsmail at btinternet.com (essexman) Date: Sat, 08 Apr 2006 21:52:28 -0000 Subject: [Bug 38508] Re: HP Pavilion dv4145ea Suspend to Ram References: <20060406224410.24486.29018.malonedeb@gangotri.ubuntu.com> Message-ID: <20060408215228.32313.32494.malone@gandwana.ubuntu.com> Possible Duplicate of #37367 -- HP Pavilion dv4145ea Suspend to Ram https://launchpad.net/malone/bugs/38508 From ralphsmail at btinternet.com Sat Apr 8 21:54:02 2006 From: ralphsmail at btinternet.com (essexman) Date: Sat, 08 Apr 2006 21:54:02 -0000 Subject: [Bug 38508] Re: HP Pavilion dv4145ea Suspend to Ram References: <20060406224410.24486.29018.malonedeb@gangotri.ubuntu.com> Message-ID: <20060408215402.32313.60810.malone@gandwana.ubuntu.com> Also possibly #23674 -- HP Pavilion dv4145ea Suspend to Ram https://launchpad.net/malone/bugs/38508 From dennis at kaarsemaker.net Sat Apr 8 22:02:47 2006 From: dennis at kaarsemaker.net (Dennis Kaarsemaker) Date: Sat, 08 Apr 2006 22:02:47 -0000 Subject: [Bug 38508] Re: HP Pavilion dv4145ea Suspend to Ram References: <20060406224410.24486.29018.malonedeb@gangotri.ubuntu.com> Message-ID: <20060408220247.32233.9788.launchpad@gandwana.ubuntu.com> *** This bug is a duplicate of bug 37367 *** ** Changed in: linux-meta linux-image-2.6-386 (Ubuntu) Sourcepackagename: linux-meta => linux-source-2.6.15 Binarypackagename: linux-image-2.6-386 => None ** This bug has been marked a duplicate of bug 37367 The suspension to ram doesnt work in Dapper -- HP Pavilion dv4145ea Suspend to Ram https://launchpad.net/malone/bugs/38508 From d.knip at comcast.net Sat Apr 8 22:26:19 2006 From: d.knip at comcast.net (Daniel Knip) Date: Sat, 08 Apr 2006 22:26:19 -0000 Subject: [Bug 26075] RE: [Bug 26075] Re: [Bug 26075] Re: HP Pavilion dv1000 laptop wirelessbutton will not enable and disable wireless References: <20060113144745.21012.65346.launchpad@macquarie.warthogs.hbd.com> <20060405131134.14572.1567.malone@gandwana.ubuntu.com> <1144514196.3414.9.camel@mirage> Message-ID: <000801c65b5b$75afe0d0$6901a8c0@1300intel> Dennis, I tried flight 6 but my wireless card lite did not illuminate. I don't THINK it is my hardware, it works fine with xp so for what that is worth. -----Original Message----- From: bounces at canonical.com [mailto:bounces at canonical.com] On Behalf Of Dennis Kaarsemaker Sent: Saturday, April 08, 2006 9:37 AM To: d.knip at comcast.net Subject: [Bug 26075] Re: [Bug 26075] Re: HP Pavilion dv1000 laptop wirelessbutton will not enable and disable wireless Susan, that's different hardware so a different bug. -- HP Pavilion dv1000 laptop wireless button will not enable and disable wireless https://launchpad.net/malone/bugs/26075 -- HP Pavilion dv1000 laptop wireless button will not enable and disable wireless https://launchpad.net/malone/bugs/26075 From matt.andruff at gmail.com Sat Apr 8 23:48:34 2006 From: matt.andruff at gmail.com (trubblelmaker) Date: Sat, 08 Apr 2006 23:48:34 -0000 Subject: [Bug 36525] Re: bcm43xx Driver only works @ 11Mb/s References: <20060325040432.6253.74364.malonedeb@gandwana.ubuntu.com> Message-ID: <20060408234834.24516.60515.malone@gangotri.ubuntu.com> sorry atheros isn't bcm4306 or bcm4318 and isn't actually related to bcm43xx driver at all, so thanks for the input but your on a different chipset, with your own driver -- bcm43xx Driver only works @ 11Mb/s https://launchpad.net/malone/bugs/36525 From matt.andruff at gmail.com Sun Apr 9 00:38:27 2006 From: matt.andruff at gmail.com (trubblelmaker) Date: Sun, 09 Apr 2006 00:38:27 -0000 Subject: [Bug 38752] Re: bcm43xx does not associate unless "iwlist scan" is invoked. References: <20060408153924.32313.6926.malonedeb@gandwana.ubuntu.com> Message-ID: <20060409003827.32313.10831.malone@gandwana.ubuntu.com> what's your output from running lspci | grep Broadcom dmesg | grep bcm iwconfig just after booting, (before you run iwlist scan) -- bcm43xx does not associate unless "iwlist scan" is invoked. https://launchpad.net/malone/bugs/38752 From cpinto at yimports.com Sun Apr 9 00:40:55 2006 From: cpinto at yimports.com (Celso Pinto) Date: Sun, 09 Apr 2006 00:40:55 -0000 Subject: [Bug 26075] Re: HP Pavilion dv1000 laptop wireless button will not enable and disable wireless References: <20060113144745.21012.65346.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060409004055.32313.35648.malone@gandwana.ubuntu.com> The led on dv1000 is disabled by default. You can enable wlan leds with the following command as root: % echo 1 > /sys/bus/pci/drivers/ipw2200/0000\:02\:06.0/led This applies for dv1245ea which is of the dv1000 family. The led not being enable has no interference with radio kill switch operations. Since Flight6 ships with network-manager, it's easy to discover if the switch is on or off: if you see a network you have it on, otherwise it's off. By default, the kill switch is off so after boot you have the ability to join any network you wish. -- HP Pavilion dv1000 laptop wireless button will not enable and disable wireless https://launchpad.net/malone/bugs/26075 From crimsun at fungus.sh.nu Sun Apr 9 02:14:23 2006 From: crimsun at fungus.sh.nu (Daniel T. Chen) Date: Sun, 09 Apr 2006 02:14:23 -0000 Subject: [Bug 30014] Re: Sound is muted by default on Vaio FS115 with HDA/RealTek References: <20060129215006.9306.97651.malonedeb@gandwana.ubuntu.com> Message-ID: <20060409021423.32313.6221.launchpad@gandwana.ubuntu.com> ** Changed in: linux-source-2.6.15 (Ubuntu) Assignee: Ubuntu Desktop Bugs => Ben Collins -- Sound is muted by default on Vaio FS115 with HDA/RealTek https://launchpad.net/malone/bugs/30014 From crimsun at fungus.sh.nu Sun Apr 9 02:22:54 2006 From: crimsun at fungus.sh.nu (Daniel T. Chen) Date: Sun, 09 Apr 2006 02:22:54 -0000 Subject: [Bug 30014] Re: Sound is muted by default on Vaio FS115 with HDA/RealTek References: <20060129215006.9306.97651.malonedeb@gandwana.ubuntu.com> Message-ID: <20060409022255.24516.63500.malone@gangotri.ubuntu.com> Hi, in the future please use the "Add Attachment" link in the left bar for attaching info instead of placing it in comments. Thanks. This issue has been resolved with the latest upload of alsa-utils, which unmutes the 'Front' element and sets it to a sane default (which seems to be required for many HDA codecs). alsa-utils (1.0.10-1ubuntu9) dapper; urgency=low * debian/init: Unmute 'Front' element for HDA Intel (hda-intel), and unmute 'Analog Front' element for SB Live 7.1/24-bit (ca0106). Closes: LP#35775 -- Daniel T Chen Mon, 27 Mar 2006 18:02:00 -0500 Closing bug, please reopen if a daily-live iso or daily iso still exhibits the original issue. ** Changed in: linux-source-2.6.15 (Ubuntu) Sourcepackagename: linux-source-2.6.15 => alsa-utils Assignee: Ben Collins => Daniel T. Chen Status: Needs Info => Fix Released -- Sound is muted by default on Vaio FS115 with HDA/RealTek https://launchpad.net/malone/bugs/30014 From crimsun at fungus.sh.nu Sun Apr 9 02:27:28 2006 From: crimsun at fungus.sh.nu (Daniel T. Chen) Date: Sun, 09 Apr 2006 02:27:28 -0000 Subject: [Bug 6608] Re: Mute is off on Sony Vaio FSxxx (Realtek/HDA audio routeing) References: <20060110143309.5372.30050.malonedeb@gangotri.ubuntu.com> Message-ID: <20060409022728.24486.61970.malone@gangotri.ubuntu.com> *** This bug is a duplicate of bug 30014 *** alsa-utils (1.0.10-1ubuntu9) dapper; urgency=low * debian/init: Unmute 'Front' element for HDA Intel (hda-intel), and unmute 'Analog Front' element for SB Live 7.1/24-bit (ca0106). Closes: LP#35775 -- Daniel T Chen Mon, 27 Mar 2006 18:02:00 -0500 ** Changed in: alsa-utils (Ubuntu) Assignee: (unassigned) => Daniel T. Chen Status: Unconfirmed => Fix Released -- Mute is off on Sony Vaio FSxxx (Realtek/HDA audio routeing) https://launchpad.net/malone/bugs/6608 From eric at el-studio.com Sun Apr 9 03:39:58 2006 From: eric at el-studio.com (Eric Johnson) Date: Sun, 09 Apr 2006 03:39:58 -0000 Subject: [Bug 29767] Re: IBM Thinkpad X41 suspend to disk unsatisfactory regression References: <20060126124346.26274.53643.malonedeb@gangotri.ubuntu.com> Message-ID: <20060409033958.32233.21743.malone@gandwana.ubuntu.com> Valentijn's suggestion for turning off laptop-mode.conf's "CONTROL_HD_WRITECACHE" seems to work on my Thinkpad X22 (radeon xorg driver). It also significantly speeds restore from hibernate. Any way to get this to be the default for laptop-mode in these machines? -- IBM Thinkpad X41 suspend to disk unsatisfactory regression https://launchpad.net/malone/bugs/29767 From torrance123 at gmail.com Sun Apr 9 04:00:12 2006 From: torrance123 at gmail.com (Torrance) Date: Sun, 09 Apr 2006 04:00:12 -0000 Subject: [Bug 27979] Re: Dapper boot failure from external USB hard drive References: <20060113152011.29386.81523.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060409040012.24486.17023.malone@gangotri.ubuntu.com> I believe I have a similar problem, and can shed some light: I have installed both Ubuntu (Breezy, and Flight 5 & 6) and openSUSE 10.1 (beta 9) on an external USB drive - openSUSE worked, Ubuntu did not. The issue seems to be the order that the Ubuntu installer is listing the drives during install. For openSUSE my internal is listed as sda, and my external as sdb, whereas the Ubuntu installer lists my internal as sdb, and my external as sda. The problem here is that "sda" should always be the primary internal drive. What this means is that when I try to boot, Ubuntu attempts to boot off an sda partition (whereas it should be booting off te external drive, ie. sdb), but of course the booting system believes this is referring to the internal drive, and of course there is no internal partition set for Ubuntu. I tried to work around this by loading up my Ubuntu system (from another distro's install CD) and fixing the yaboot.conf file to point to the right partitions/drives. This worked, but problems remained as there are obviously other drive relationships set up during install that I had not changed, and, for example, a drive scan during startup failed. I am not entirely sure if this is the same problem as above - if not, please let me know and I will file it as a separate bug. -- Dapper boot failure from external USB hard drive https://launchpad.net/malone/bugs/27979 From torrance123 at gmail.com Sun Apr 9 04:07:45 2006 From: torrance123 at gmail.com (Torrance) Date: Sun, 09 Apr 2006 04:07:45 -0000 Subject: [Bug 34723] Re: iMac G5 Thermal Fan Support References: <20060313091457.30057.2443.malonedeb@gandwana.ubuntu.com> Message-ID: <20060409040745.24516.30253.malone@gangotri.ubuntu.com> There is an option for iMacG5 thermal control during the 2.6.15 kernal compile. This should be set by default in Ubuntu. I also understand this support only applies to the iMac G5 revison a (and possibly b). Kernel 2.6.15 has full support for all iMac G5 models. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Unconfirmed => Confirmed -- iMac G5 Thermal Fan Support https://launchpad.net/malone/bugs/34723 From mas at mylug.org Sun Apr 9 05:04:44 2006 From: mas at mylug.org (mas) Date: Sun, 09 Apr 2006 05:04:44 -0000 Subject: [Bug 6550] Re: Grub wont uncompress kernel image References: <20060108150918.15433.4157.malonedeb@gangotri.ubuntu.com> Message-ID: <20060409050444.24516.16175.malone@gangotri.ubuntu.com> *** This bug is a duplicate of bug 33939 *** A big thanks for the developers. The new kernel image 2.6.15-20 has removed the EDD and now my machine boots with the stock kernel. -- Grub wont uncompress kernel image https://launchpad.net/malone/bugs/6550 From pbeeson_14 at yahoo.com Sun Apr 9 05:12:46 2006 From: pbeeson_14 at yahoo.com (pfb) Date: Sun, 09 Apr 2006 05:12:46 -0000 Subject: [Bug 28840] Re: rhythmbox dies when trying to play to USB soundcard References: <20060118004501.25106.26702.malonedeb@gangotri.ubuntu.com> Message-ID: <20060409051246.32313.1169.malone@gandwana.ubuntu.com> I have this problem as well, but I'm using a Soundblaster Live! 24-bit PCI card. I think it could be alsa and Soundblaster. -- rhythmbox dies when trying to play to USB soundcard https://launchpad.net/malone/bugs/28840 From pbeeson_14 at yahoo.com Sun Apr 9 05:24:54 2006 From: pbeeson_14 at yahoo.com (pfb) Date: Sun, 09 Apr 2006 05:24:54 -0000 Subject: [Bug 28840] Re: rhythmbox dies when trying to play to USB soundcard References: <20060118004501.25106.26702.malonedeb@gangotri.ubuntu.com> Message-ID: <20060409052454.32233.51573.malone@gandwana.ubuntu.com> Actually, for me it doesn't bomb, it just gives me the red circle with the white dash in it. If I click on that is says "internal data flow error". But, my sound works greak with xxms, wit hthe gnome login and logout sounds. Right now, it's just rhythmbox. -- rhythmbox dies when trying to play to USB soundcard https://launchpad.net/malone/bugs/28840 From pbeeson_14 at yahoo.com Sun Apr 9 05:41:16 2006 From: pbeeson_14 at yahoo.com (pfb) Date: Sun, 09 Apr 2006 05:41:16 -0000 Subject: [Bug 28840] Re: rhythmbox dies when trying to play to USB soundcard References: <20060118004501.25106.26702.malonedeb@gangotri.ubuntu.com> Message-ID: <20060409054116.24516.40632.malone@gangotri.ubuntu.com> I fixed my problem, and maybe it'll help others fix their problem too, though the more I read other posting here, the more I think that this is unrelated to the USB problems discussed above. Since I have multiple sound cards, I tried the trick of adding a /etc/asound.conf file with the usual pcm.!default blah blah blah to use my soundblaster card. This made rhythmbox not work properly even though other audio worked fine. I removed that file and simply chose the coundcard under my Preferences->Sound menu, and it started working ok (after I restarted alsa to use the new ~/.asoundrc file). In breezy, this menu didn't work, which is when I learned to do the asound.conf thing, but now it does work and the asound.conf thing didn't. Hope this helps, but if not, sorry. -- rhythmbox dies when trying to play to USB soundcard https://launchpad.net/malone/bugs/28840 From tskisner.public at gmail.com Sun Apr 9 06:16:05 2006 From: tskisner.public at gmail.com (TedKisner) Date: Sun, 09 Apr 2006 06:16:05 -0000 Subject: [Bug 38673] Re: prism54 driver requires new firmware name References: <20060407232751.24516.74228.malonedeb@gangotri.ubuntu.com> Message-ID: <20060409061605.32313.21795.malone@gandwana.ubuntu.com> *** This bug is a duplicate of bug 38278 *** sorry for the dupe. As mentioned in the other reports, the prism54 driver conflicts with the new islm infrastructure (which gets loaded first). If you manually unload all the islm modules and then modprobe prism54, everything works. Somebody close this bug, sorry for the noise... -Ted -- prism54 driver requires new firmware name https://launchpad.net/malone/bugs/38673 From ivan.matveich at gmail.com Sun Apr 9 08:14:03 2006 From: ivan.matveich at gmail.com (Ivan Matveich) Date: Sun, 09 Apr 2006 08:14:03 -0000 Subject: [Bug 38752] Re: [Bug 38752] Re: bcm43xx does not associate unless "iwlist scan" is invoked. References: <20060408153924.32313.6926.malonedeb@gandwana.ubuntu.com> <20060409003827.32313.10831.malone@gandwana.ubuntu.com> Message-ID: I commented out the "up iwlist scan" line and rebooted; the interface is non-functional as expected. Requested output is (I cross my fingers) attached. BTW: I've since reconfigured my interfaces to run at rate 11M; ignore that discrepancy. On 4/8/06, trubblelmaker wrote: > what's your output from running > lspci | grep Broadcom > dmesg | grep bcm > iwconfig > > just after booting, (before you run iwlist scan) > -- > bcm43xx does not associate unless "iwlist scan" is invoked. > https://launchpad.net/malone/bugs/38752 > book:~$ sudo -s book:~# lspci | grep Broadcom 0001:10:12.0 Network controller: Broadcom Corporation BCM4306 802.11b/g Wireless LAN Controller (rev 03) book:~# dmesg | grep bcm [ 52.776369] bcm43xx: driver book:~# iwconfig lo no wireless extensions. wireless IEEE 802.11b/g ESSID:"TV" Nickname:"Broadcom 4306" Mode:Managed Frequency=2.457 GHz Access Point: Invalid Bit Rate:11 Mb/s Tx-Power=15 dBm RTS thr:off Fragment thr:off Encryption key:off ethernet no wireless extensions. sit0 no wireless extensions. book:~# iwlist scan lo Interface doesn't support scanning. wireless Scan completed : Cell 01 - Address: 00:14:A5:04:C9:99 ESSID:"TV" Protocol:IEEE 802.11bg Mode:Master Channel:10 Encryption key:off Bit Rates:54 Mb/s Extra: Rates (Mb/s): 1 2 5.5 11 6 9 12 18 24 36 48 54 Quality=100/100 Signal level=-30 dBm Extra: Last beacon: 4ms ago ethernet Interface doesn't support scanning. sit0 Interface doesn't support scanning. book:~# iwconfig wireless wireless IEEE 802.11b/g ESSID:"TV" Nickname:"Broadcom 4306" Mode:Managed Frequency=2.457 GHz Access Point: 00:14:A5:04:C9:99 Bit Rate:11 Mb/s Tx-Power=15 dBm RTS thr:off Fragment thr:off Encryption key:off book:~# ping google.com PING google.com (64.233.187.99) 56(84) bytes of data. 64 bytes from 64.233.187.99: icmp_seq=1 ttl=243 time=22.7 ms 64 bytes from 64.233.187.99: icmp_seq=2 ttl=243 time=21.9 ms --- google.com ping statistics --- 2 packets transmitted, 2 received, 0% packet loss, time 1002ms rtt min/avg/max/mdev = 21.974/22.365/22.757/0.419 ms book:~# -- bcm43xx does not associate unless "iwlist scan" is invoked. https://launchpad.net/malone/bugs/38752 From eparsons at nortel.com Sun Apr 9 08:22:06 2006 From: eparsons at nortel.com (ep) Date: Sun, 09 Apr 2006 08:22:06 -0000 Subject: [Bug 38805] parallel printer port References: <20060409010425.24516.88371.malonedeb@gangotri.ubuntu.com> Message-ID: <20060409082206.24486.55549.launchpad@canonical@gangotri.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: Parallel printer port seems to become broken under the latest dapper kernel update (2.6.15-20). Parallel printer port works fine under previous kernels (e.g., 2.6.15-19). All latest updates have been applied. Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: Parallel printer port seems to become broken under the latest dapper kernel update (2.6.15-20). Parallel printer port works fine under previous kernels (e.g., 2.6.15-19). All latest updates have been applied. -- parallel printer port https://launchpad.net/malone/bugs/38805 From dennis at kaarsemaker.net Sun Apr 9 08:22:06 2006 From: dennis at kaarsemaker.net (Dennis Kaarsemaker) Date: Sun, 09 Apr 2006 08:22:06 -0000 Subject: [Bug 38805] Re: parallel printer port References: <20060409010425.24516.88371.malonedeb@gangotri.ubuntu.com> Message-ID: <20060409082206.24486.61108.launchpad@gangotri.ubuntu.com> ** Changed in: kernel-image-2.6.7-amd64 kernel-image-2.6-amd64-generic (Ubuntu) Sourcepackagename: kernel-image-2.6.7-amd64 => linux-source-2.6.15 Binarypackagename: kernel-image-2.6-amd64-generic => None -- parallel printer port https://launchpad.net/malone/bugs/38805 From pekkis at ainanurin.net Sun Apr 9 08:35:11 2006 From: pekkis at ainanurin.net (=?utf-8?q?Pekka_Ojanper=C3=A4?=) Date: Sun, 09 Apr 2006 08:35:11 -0000 Subject: [Bug 38824] Hotplug load wrong prism isl driver References: <20060409043050.32313.32959.malonedeb@gandwana.ubuntu.com> Message-ID: <20060409083511.32233.57331.launchpad@canonical@gandwana.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Rejected Description: This broblem comes with kernel 2.6.15-20-386. This works with kernel 2.6.15-19-386. wlan device in my laptop is pcmcia card. ZyXEL G-100. lspci tells that it's with Prism card and type is ISL3890. 0000:03:00.0 Network controller: Intersil Corporation Intersil ISL3890 [Prism GT/Prism Duette] (rev 01) When I install this card hotplug tryes to load isl3886 firmware. [4374207.453000] pccard: CardBus card inserted into slot 0 [4374207.453000] PCI: Enabling device 0000:03:00.0 (0000 -> 0002) [4374207.453000] ACPI: PCI Interrupt 0000:03:00.0[A] -> Link [LNKE] -> GSI 11 (level, low) -> IRQ 11 [4374208.288000] islusb: Request firmware for 'isl3886' failed: -2 [4374208.288000] eth1: could not upload firmware ('isl3886') [4374208.288000] eth1: islpci_reset: failure [4374208.338000] islusb: unable to boot device [4374208.392000] islusb: Request firmware for 'isl3886' failed: -2 [4374208.392000] eth1: could not upload firmware ('isl3886') [4374208.392000] eth1: islpci_reset: failure Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Rejected Description: This broblem comes with kernel 2.6.15-20-386. This works with kernel 2.6.15-19-386. wlan device in my laptop is pcmcia card. ZyXEL G-100. lspci tells that it's with Prism card and type is ISL3890. 0000:03:00.0 Network controller: Intersil Corporation Intersil ISL3890 [Prism GT/Prism Duette] (rev 01) When I install this card hotplug tryes to load isl3886 firmware. [4374207.453000] pccard: CardBus card inserted into slot 0 [4374207.453000] PCI: Enabling device 0000:03:00.0 (0000 -> 0002) [4374207.453000] ACPI: PCI Interrupt 0000:03:00.0[A] -> Link [LNKE] -> GSI 11 (level, low) -> IRQ 11 [4374208.288000] islusb: Request firmware for 'isl3886' failed: -2 [4374208.288000] eth1: could not upload firmware ('isl3886') [4374208.288000] eth1: islpci_reset: failure [4374208.338000] islusb: unable to boot device [4374208.392000] islusb: Request firmware for 'isl3886' failed: -2 [4374208.392000] eth1: could not upload firmware ('isl3886') [4374208.392000] eth1: islpci_reset: failure -- Hotplug load wrong prism isl driver https://launchpad.net/malone/bugs/38824 From dennis at kaarsemaker.net Sun Apr 9 08:35:11 2006 From: dennis at kaarsemaker.net (Dennis Kaarsemaker) Date: Sun, 09 Apr 2006 08:35:11 -0000 Subject: [Bug 38824] Re: Hotplug load wrong prism isl driver References: <20060409043050.32313.32959.malonedeb@gandwana.ubuntu.com> Message-ID: <20060409083511.32233.29809.malone@gandwana.ubuntu.com> *** This bug is a duplicate of bug 38278 *** Thank you for your report. However, this has been reported 4 times before, so we already know about it. Feel free to report any further issues you find. ** Changed in: hotplug (Ubuntu) Sourcepackagename: hotplug => linux-source-2.6.15 Binarypackagename: hotplug => None Status: Unconfirmed => Rejected ** This bug has been marked a duplicate of bug 38278 wifi card don't work. isl3886 is required but not installed -- Hotplug load wrong prism isl driver https://launchpad.net/malone/bugs/38824 From dennis at kaarsemaker.net Sun Apr 9 08:35:20 2006 From: dennis at kaarsemaker.net (Dennis Kaarsemaker) Date: Sun, 09 Apr 2006 08:35:20 -0000 Subject: [Bug 38278] Re: wifi card don't work. isl3886 is required but not installed References: <20060405203926.24486.7083.malonedeb@gangotri.ubuntu.com> Message-ID: <20060409083520.32233.97005.launchpad@gandwana.ubuntu.com> ** Bug 38824 has been marked a duplicate of this bug -- wifi card don't work. isl3886 is required but not installed https://launchpad.net/malone/bugs/38278 From sitsofe at yahoo.com Sun Apr 9 08:48:17 2006 From: sitsofe at yahoo.com (Sitsofe Wheeler) Date: Sun, 09 Apr 2006 08:48:17 -0000 Subject: [Bug 38805] Re: parallel printer port References: <20060409010425.24516.88371.malonedeb@gangotri.ubuntu.com> Message-ID: <20060409084817.24516.73604.malone@gangotri.ubuntu.com> Is there any unusual output in dmesg ? -- parallel printer port https://launchpad.net/malone/bugs/38805 From sitsofe at yahoo.com Sun Apr 9 08:49:12 2006 From: sitsofe at yahoo.com (Sitsofe Wheeler) Date: Sun, 09 Apr 2006 08:49:12 -0000 Subject: [Bug 38805] Re: parallel printer port References: <20060409010425.24516.88371.malonedeb@gangotri.ubuntu.com> Message-ID: <20060409084912.24516.63999.malone@gangotri.ubuntu.com> Oh and in what respect is the parallel printer port broken? It isn't detected? Printing fails? If printing fails does it fail with an error message? -- parallel printer port https://launchpad.net/malone/bugs/38805 From espanjer at home.nl Sun Apr 9 08:48:51 2006 From: espanjer at home.nl (emile) Date: Sun, 09 Apr 2006 08:48:51 -0000 Subject: [Bug 35215] Re: ipw3945 driver required for functionality on new Intel PRO/Wireless 3945ABG Mini-PCI Express Adapters References: <20060316173707.11105.89035.malonedeb@gandwana.ubuntu.com> Message-ID: <20060409084851.24516.60839.malone@gangotri.ubuntu.com> I have a dell inspiron 9400. It's also depending on ipw3945. Please add drivers for it. -- ipw3945 driver required for functionality on new Intel PRO/Wireless 3945ABG Mini-PCI Express Adapters https://launchpad.net/malone/bugs/35215 From dean at deansas.org Sun Apr 9 08:55:40 2006 From: dean at deansas.org (Dean Sas) Date: Sun, 09 Apr 2006 08:55:40 -0000 Subject: [Bug 29971] Re: Ubuntu doesn't detect and install my wireless orinoco_usb chipset References: <20060129095757.9344.91081.malonedeb@gandwana.ubuntu.com> Message-ID: <20060409085540.32233.55922.malone@gandwana.ubuntu.com> I'm not sure about perfectly, I have to switch the W200 on and off via the fn shortcut after hibernating else the firmware won't get downloaded. Of course just having to do that is a bit better than having to download and compile it myself. -- Ubuntu doesn't detect and install my wireless orinoco_usb chipset https://launchpad.net/malone/bugs/29971 From karvinen+launchpad at iki.fi Sun Apr 9 09:19:28 2006 From: karvinen+launchpad at iki.fi (Tero Karvinen) Date: Sun, 09 Apr 2006 09:19:28 -0000 Subject: [Bug 38839] Fails to boot on a centrino laptop References: <20060409091928.32233.9591.malonedeb@gandwana.ubuntu.com> Message-ID: <20060409091928.32233.9591.malonedeb@gandwana.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: Booting freezes on "Uncompressing Linux... Ok, booting the kernel. ". To reproduce: On Acer Travelmate 3004WTMi (Intel Centrino), with Dapper Flight 6 i386 Install CD-ROM 1) Boot from CD 2) Choose "Install to hard disk" What happens: The text "Uncompressing Linux... Ok, booting the kernel. " is printed on the screen. After that, complete freeze: Caps lock does not change lights, alt-ctrl-del does nothing, a quick click on power button does nothing. Must shut down computer by pressing power button for 10 s. What should happen: Computer should boot normally. To bypass: 1) Booted from CD 2) Move cursor to "Install to hard disk" 3) "F6 Other Options": added "noapic" What happens: Computer booted past the "booting the kernel. " (3004WTMi also needs "irqpool" option to use network and DVD-drive). The computer is Acer Travelmate 3000 3004WTMi. CPU is Intel Centrino, Intel(R) Pentium(R) M processor 2.00GHz, version 6.13.8. BIOS is Acer 3B07 (06/08/05), has (among others) capability "biosbootspecification". Motherboard is Hummingbird. I used md5sum to check the CDROM iso before burning, and "verify CD" in installer to check that CDROM is good. More on my setup and tests: http://www.iki.fi/karvinen/acer_travelmate_3004wtmi_with_linux.html -- Fails to boot on a centrino laptop https://launchpad.net/malone/bugs/38839 From karvinen+launchpad at iki.fi Sun Apr 9 09:22:45 2006 From: karvinen+launchpad at iki.fi (Tero Karvinen) Date: Sun, 09 Apr 2006 09:22:45 -0000 Subject: [Bug 38841] Peripherals not found (without using "irqpool") References: <20060409092246.24516.35194.malonedeb@gangotri.ubuntu.com> Message-ID: <20060409092246.24516.35194.malonedeb@gangotri.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: Peripherals, such as network interface card and external CDROM-drive, are not found. To reproduce: On Acer Travelmate 3004WTMi (Intel Centrino), with Dapper Flight 6 i386 Install CD-ROM 1) Booted from CD 2) Move cursor to "Install to hard disk" 3) "F6 Other Options": added "noapic" (bug #38839) What happens: Computer boots past the "booting the kernel. " Installer reports: "No common CDROM found". To bypass, use "irqpool" option (in addition to noapic). The computer is Acer Travelmate 3000 3004WTMi. CPU is Intel Centrino, Intel(R) Pentium(R) M processor 2.00GHz, version 6.13.8. BIOS is Acer 3B07 (06/08/05), has (among others) capability "biosbootspecification". Motherboard is Hummingbird. I used md5sum to check the CDROM iso before burning, and "verify CD" in installer to check that CDROM is good. More on my setup and tests: http://www.iki.fi/karvinen/acer_travelmate_3004wtmi_with_linux.html -- Peripherals not found (without using "irqpool") https://launchpad.net/malone/bugs/38841 From karvinen+launchpad at iki.fi Sun Apr 9 09:27:59 2006 From: karvinen+launchpad at iki.fi (Tero Karvinen) Date: Sun, 09 Apr 2006 09:27:59 -0000 Subject: [Bug 38702] Re: sound does not work References: <20060408091302.32233.60251.malonedeb@gandwana.ubuntu.com> Message-ID: <20060409092759.32313.84887.malone@gandwana.ubuntu.com> I have no sound on 2.6.15-19-386, Intel 82801FB and Dapper Flight 6, even though that is almost the same config that works for Nils. Using Acer Travelmate 3004WTMi. -- sound does not work https://launchpad.net/malone/bugs/38702 From exidefix at gmail.com Sun Apr 9 09:35:25 2006 From: exidefix at gmail.com (IdefiX666) Date: Sun, 09 Apr 2006 09:35:25 -0000 Subject: [Bug 38693] Re: kubuntu install error: 4294675.149000 ohci1394: fw-host0: SelfID recived outside of bus reset sequence References: <20060408080343.24486.99839.malonedeb@gangotri.ubuntu.com> Message-ID: <20060409093525.32313.95454.malone@gandwana.ubuntu.com> I have instaled newest wersion, and I have still got the same bug -- kubuntu install error: 4294675.149000 ohci1394: fw-host0: SelfID recived outside of bus reset sequence https://launchpad.net/malone/bugs/38693 From exidefix at gmail.com Sun Apr 9 09:36:12 2006 From: exidefix at gmail.com (IdefiX666) Date: Sun, 09 Apr 2006 09:36:12 -0000 Subject: [Bug 38693] Re: kubuntu install error: 4294675.149000 ohci1394: fw-host0: SelfID recived outside of bus reset sequence References: <20060408080343.24486.99839.malonedeb@gangotri.ubuntu.com> Message-ID: <20060409093612.32233.19600.malone@gandwana.ubuntu.com> * I was trying to install, abd still got the same bug -- kubuntu install error: 4294675.149000 ohci1394: fw-host0: SelfID recived outside of bus reset sequence https://launchpad.net/malone/bugs/38693 From karvinen+launchpad at iki.fi Sun Apr 9 09:40:35 2006 From: karvinen+launchpad at iki.fi (Tero Karvinen) Date: Sun, 09 Apr 2006 09:40:35 -0000 Subject: [Bug 38702] Re: sound does not work References: <20060408091302.32233.60251.malonedeb@gandwana.ubuntu.com> Message-ID: <20060409094035.24516.3011.malone@gangotri.ubuntu.com> Very similar bugs: - Bug #37975 - no sound with Intel 82801FB - Bug #37287 - no sound with Intel 82801G (x2), no sound with 82801FB One reporter has Acer Travelmate 3000, just like me. A bit similar: - Bug #37539 - no sound with Intel HDA with STAC9200 - Bug #30408 - no sound on some intel 915 - Bug #5844 - no sound with some intel board Some say it worked with one of these but not others: 2.6.15-20, 2.6.15-18, 2.6.15-19. However, different versions are reported to work for different setups. For me, sound worked partially with some settings on Dapper Flight 5. http://www.iki.fi/karvinen/acer_travelmate_3004wtmi_with_linux.html -- sound does not work https://launchpad.net/malone/bugs/38702 From dennis at kaarsemaker.net Sun Apr 9 09:43:17 2006 From: dennis at kaarsemaker.net (Dennis Kaarsemaker) Date: Sun, 09 Apr 2006 09:43:17 -0000 Subject: [Bug 38702] Re: [Bug 38702] Re: sound does not work References: <20060408091302.32233.60251.malonedeb@gandwana.ubuntu.com> <20060409092759.32313.84887.malone@gandwana.ubuntu.com> Message-ID: <1144575797.3414.104.camel@mirage> Tero, the latest kernel is -20. Please do a full dist-upgrade. -- sound does not work https://launchpad.net/malone/bugs/38702 From pmjdebruijn at gmail.com Sun Apr 9 09:45:21 2006 From: pmjdebruijn at gmail.com (Pascal de Bruijn) Date: Sun, 09 Apr 2006 09:45:21 -0000 Subject: [Bug 31527] Re: DRI locks up the machine when starting X on a Radeon 9250 References: <20060215163856.15884.24165.malonedeb@gangotri.ubuntu.com> Message-ID: <20060409094521.24516.76882.malone@gangotri.ubuntu.com> I tried to install Dapper yesterday (8 April 2006), after the installation, I booting into single user mode, and applied all updates up and until that day. X still wouldn't start, so this issue still isn't resolved. I have this card: 0000:01:00.0 VGA compatible controller: ATI Technologies Inc RV280 [Radeon 9200 PRO] (rev 01) 0000:01:00.1 Display controller: ATI Technologies Inc: Unknown device 5940 (rev 01) So I can also confirm this issue. -- DRI locks up the machine when starting X on a Radeon 9250 https://launchpad.net/malone/bugs/31527 From keithcu at gmail.com Sun Apr 9 09:54:38 2006 From: keithcu at gmail.com (keithCu) Date: Sun, 09 Apr 2006 09:54:38 -0000 Subject: [Bug 34870] Re: ipw2200 repeatedly crashes. References: <20060314104909.30082.87848.malonedeb@gandwana.ubuntu.com> Message-ID: <20060409095438.32233.36195.malone@gandwana.ubuntu.com> I just did a clean install of Flight 6 and it still crashes. -- ipw2200 repeatedly crashes. https://launchpad.net/malone/bugs/34870 From sitsofe at yahoo.com Sun Apr 9 10:09:02 2006 From: sitsofe at yahoo.com (Sitsofe Wheeler) Date: Sun, 09 Apr 2006 10:09:02 -0000 Subject: [Bug 38766] Re: [bcm43xx] Wireless not properly detected. References: <20060408175151.24516.78847.malonedeb@gangotri.ubuntu.com> Message-ID: <20060409100902.24516.48803.malone@gangotri.ubuntu.com> Could you also attach the output of lspci please? -- [bcm43xx] Wireless not properly detected. https://launchpad.net/malone/bugs/38766 From sitsofe at yahoo.com Sun Apr 9 10:08:23 2006 From: sitsofe at yahoo.com (Sitsofe Wheeler) Date: Sun, 09 Apr 2006 10:08:23 -0000 Subject: [Bug 38766] Re: [bcm43xx] Wireless not properly detected. References: <20060408175151.24516.78847.malonedeb@gangotri.ubuntu.com> Message-ID: <20060409100823.24516.25892.malone@gangotri.ubuntu.com> Your report is rather confusing - although you have filed it against ndiswrapper are you really using ndiswrapper drivers with your card? What's the output of the dmesg command? ** Summary changed: - Wireless not properly detected. + [bcm43xx] Wireless not properly detected. -- [bcm43xx] Wireless not properly detected. https://launchpad.net/malone/bugs/38766 From sitsofe at yahoo.com Sun Apr 9 10:20:58 2006 From: sitsofe at yahoo.com (Sitsofe Wheeler) Date: Sun, 09 Apr 2006 10:20:58 -0000 Subject: [Bug 36791] Re: [bcm43xx] Wireless adapter Broadcom 4306 does not activate References: <20060326230519.20514.38613.malonedeb@gangotri.ubuntu.com> Message-ID: <20060409102058.32233.97811.launchpad@gandwana.ubuntu.com> ** Summary changed: - Wireless adapter Broadcom 4306 does not activate + [bcm43xx] Wireless adapter Broadcom 4306 does not activate -- [bcm43xx] Wireless adapter Broadcom 4306 does not activate https://launchpad.net/malone/bugs/36791 From sitsofe at yahoo.com Sun Apr 9 10:23:48 2006 From: sitsofe at yahoo.com (Sitsofe Wheeler) Date: Sun, 09 Apr 2006 10:23:48 -0000 Subject: [Bug 37765] Re: [bcm43xx] No matter what it simply will not connect. It scan and sees the networks, but it cannot connect. References: <20060402194212.5415.86136.malonedeb@gangotri.ubuntu.com> Message-ID: <20060409102348.32233.73795.launchpad@gandwana.ubuntu.com> ** Summary changed: - No matter what it simply will not connect. It scan and sees the networks, but it cannot connect. + [bcm43xx] No matter what it simply will not connect. It scan and sees the networks, but it cannot connect. -- [bcm43xx] No matter what it simply will not connect. It scan and sees the networks, but it cannot connect. https://launchpad.net/malone/bugs/37765 From sitsofe at yahoo.com Sun Apr 9 10:27:30 2006 From: sitsofe at yahoo.com (Sitsofe Wheeler) Date: Sun, 09 Apr 2006 10:27:30 -0000 Subject: [Bug 35624] Re: [bcm43xx] Broadcom BCM4306 wireless - unable to connect References: <20060319184821.12254.30538.malonedeb@gandwana.ubuntu.com> Message-ID: <20060409102730.32233.8547.launchpad@gandwana.ubuntu.com> ** Summary changed: - Broadcom BCM4306 wireless - unable to connect + [bcm43xx] Broadcom BCM4306 wireless - unable to connect -- [bcm43xx] Broadcom BCM4306 wireless - unable to connect https://launchpad.net/malone/bugs/35624 From sitsofe at yahoo.com Sun Apr 9 10:33:13 2006 From: sitsofe at yahoo.com (Sitsofe Wheeler) Date: Sun, 09 Apr 2006 10:33:13 -0000 Subject: [Bug 37308] Re: Missing BCM43xx driver References: <20060330104249.7836.64547.malonedeb@gangotri.ubuntu.com> Message-ID: <20060409103313.24486.50662.launchpad@gangotri.ubuntu.com> ** Summary changed: - Unavailable + Missing BCM43xx driver -- Missing BCM43xx driver https://launchpad.net/malone/bugs/37308 From petsov at googlemail.com Sun Apr 9 10:43:27 2006 From: petsov at googlemail.com (rado_london) Date: Sun, 09 Apr 2006 10:43:27 -0000 Subject: [Bug 38508] Re: HP Pavilion dv4145ea Suspend to Ram References: <20060406224410.24486.29018.malonedeb@gangotri.ubuntu.com> Message-ID: <20060409104328.32233.24666.malone@gandwana.ubuntu.com> *** This bug is a duplicate of bug 37367 *** At least the devs will point their attention on it and we will end up with working suspention. I sorry for the duplicate but when i posted 37367 I didnt realise that it was published. Then I read an article and posted clearer report. Forgive me -- HP Pavilion dv4145ea Suspend to Ram https://launchpad.net/malone/bugs/38508 From sitsofe at yahoo.com Sun Apr 9 10:41:17 2006 From: sitsofe at yahoo.com (Sitsofe Wheeler) Date: Sun, 09 Apr 2006 10:41:17 -0000 Subject: [Bug 35624] Re: [bcm43xx] Broadcom BCM4306 wireless - unable to connect References: <20060319184821.12254.30538.malonedeb@gandwana.ubuntu.com> Message-ID: <20060409104117.32313.37014.malone@gandwana.ubuntu.com> Other bcm43xx bugs (e.g. Bug #36525 ) warn that it only works at 11Mbit at the moment. Further some bugs claim it refuses to work unless you do an iwlist scan first... -- [bcm43xx] Broadcom BCM4306 wireless - unable to connect https://launchpad.net/malone/bugs/35624 From karvinen+launchpad at iki.fi Sun Apr 9 10:44:53 2006 From: karvinen+launchpad at iki.fi (Tero Karvinen) Date: Sun, 09 Apr 2006 10:44:53 -0000 Subject: [Bug 29498] Re: Acer Ferrari 4005 Fails to resume from suspend to RAM References: <20060123232219.15826.52517.malonedeb@gandwana.ubuntu.com> Message-ID: <20060409104453.24516.15089.malone@gangotri.ubuntu.com> I have a very similar problem with Acer Travelmate 3000 (i810) in bug #33372 . -- Acer Ferrari 4005 Fails to resume from suspend to RAM https://launchpad.net/malone/bugs/29498 From menny.evendanan at gmail.com Sun Apr 9 10:45:39 2006 From: menny.evendanan at gmail.com (menny) Date: Sun, 09 Apr 2006 10:45:39 -0000 Subject: [Bug 37308] Re: Missing BCM43xx driver References: <20060330104249.7836.64547.malonedeb@gangotri.ubuntu.com> Message-ID: <20060409104539.24516.44425.malone@gangotri.ubuntu.com> Flight CD 6 does not include bcm43xx-fwcutter too. -- Missing BCM43xx driver https://launchpad.net/malone/bugs/37308 From gsasha at cs.technion.ac.il Sun Apr 9 10:41:25 2006 From: gsasha at cs.technion.ac.il (Alex) Date: Sun, 09 Apr 2006 10:41:25 -0000 Subject: [Bug 37288] Re: Bluetooth not discovered on Dell Inspiron 9400 References: <20060330075201.6253.17494.malonedeb@gandwana.ubuntu.com> Message-ID: <20060409104125.32233.86931.malone@gandwana.ubuntu.com> here's lspci -v (the kernel is now 2-15-20, but the problem persists): 0000:00:00.0 Host bridge: Intel Corporation Mobile Memory Controller Hub (rev 03) Subsystem: Dell: Unknown device 01cd Flags: bus master, fast devsel, latency 0 Capabilities: [e0] #09 [5109] 0000:00:01.0 PCI bridge: Intel Corporation Mobile PCI Express Graphics Port (rev 03) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 0000e000-0000efff Memory behind bridge: dd000000-dfefffff Prefetchable memory behind bridge: 00000000c0000000-00000000cff00000 Capabilities: [88] #0d [0000] Capabilities: [80] Power Management version 2 Capabilities: [90] Message Signalled Interrupts: 64bit- Queue=0/0 Enable+ Capabilities: [a0] #10 [0141] 0000:00:1b.0 0403: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 01) Subsystem: Dell: Unknown device 01cd Flags: bus master, fast devsel, latency 0, IRQ 50 Memory at dfffc000 (64-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 2 Capabilities: [60] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable- Capabilities: [70] #10 [0091] 0000:00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 01) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=0b, subordinate=0b, sec-latency=0 Capabilities: [40] #10 [0141] Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0 Enable+ Capabilities: [90] #0d [0000] Capabilities: [a0] Power Management version 2 0000:00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 01) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=0c, subordinate=0c, sec-latency=0 Memory behind bridge: dcf00000-dcffffff Capabilities: [40] #10 [0141] Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0 Enable+ Capabilities: [90] #0d [0000] Capabilities: [a0] Power Management version 2 0000:00:1c.3 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 4 (rev 01) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=0d, subordinate=0e, sec-latency=0 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: dcc00000-dcefffff Prefetchable memory behind bridge: 00000000d0000000-00000000d0100000 Capabilities: [40] #10 [0141] Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0 Enable+ Capabilities: [90] #0d [0000] Capabilities: [a0] Power Management version 2 0000:00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #1 (rev 01) (prog-if 00 [UHCI]) Subsystem: Dell: Unknown device 01cd Flags: bus master, medium devsel, latency 0, IRQ 233 I/O ports at bf80 [size=32] 0000:00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #2 (rev 01) (prog-if 00 [UHCI]) Subsystem: Dell: Unknown device 01cd Flags: bus master, medium devsel, latency 0, IRQ 50 I/O ports at bf60 [size=32] 0000:00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #3 (rev 01) (prog-if 00 [UHCI]) Subsystem: Dell: Unknown device 01cd Flags: bus master, medium devsel, latency 0, IRQ 58 I/O ports at bf40 [size=32] 0000:00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #4 (rev 01) (prog-if 00 [UHCI]) Subsystem: Dell: Unknown device 01cd Flags: bus master, medium devsel, latency 0, IRQ 66 I/O ports at bf20 [size=32] 0000:00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 01) (prog-if 20 [EHCI]) Subsystem: Dell: Unknown device 01cd Flags: bus master, medium devsel, latency 0, IRQ 233 Memory at ffa80000 (32-bit, non-prefetchable) [size=1K] Capabilities: [50] Power Management version 2 Capabilities: [58] #0a [20a0] 0000:00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e1) (prog-if 01 [Subtractive decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=03, subordinate=03, sec-latency=32 Memory behind bridge: dcb00000-dcbfffff Capabilities: [50] #0d [0000] 0000:00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 01) Subsystem: Dell: Unknown device 01cd Flags: bus master, medium devsel, latency 0 Capabilities: [e0] #09 [100c] 0000:00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7 Family) Serial ATA Storage Controllers cc=IDE (rev 01) (prog-if 80 [Master]) Subsystem: Dell: Unknown device 01cd Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 177 I/O ports at I/O ports at I/O ports at I/O ports at I/O ports at bfa0 [size=16] Capabilities: [70] Power Management version 2 0000:00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 01) Subsystem: Dell: Unknown device 01cd Flags: medium devsel, IRQ 5 I/O ports at 10c0 [size=32] 0000:01:00.0 VGA compatible controller: nVidia Corporation: Unknown device 0098 (rev a1) (prog-if 00 [VGA]) Subsystem: Dell: Unknown device 019c Flags: bus master, fast devsel, latency 0, IRQ 169 Memory at dd000000 (32-bit, non-prefetchable) [size=16M] Memory at c0000000 (64-bit, prefetchable) [size=256M] Memory at de000000 (64-bit, non-prefetchable) [size=16M] I/O ports at ef00 [size=128] Expansion ROM at dfe00000 [disabled] [size=128K] Capabilities: [60] Power Management version 2 Capabilities: [68] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable- Capabilities: [78] #10 [0001] 0000:03:00.0 Ethernet controller: Broadcom Corporation BCM4401-B0 100Base-TX (rev 02) Subsystem: Dell: Unknown device 01cd Flags: bus master, fast devsel, latency 64, IRQ 177 Memory at dcbfe000 (32-bit, non-prefetchable) [size=8K] Capabilities: [40] Power Management version 2 0000:03:01.0 FireWire (IEEE 1394): Ricoh Co Ltd: Unknown device 0832 (prog-if 10 [OHCI]) Subsystem: Dell: Unknown device 01cd Flags: bus master, medium devsel, latency 64, IRQ 185 Memory at dcbfd800 (32-bit, non-prefetchable) [size=2K] Capabilities: [dc] Power Management version 2 0000:03:01.1 0805: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 19) (prog-if 01) Subsystem: Dell: Unknown device 01cd Flags: bus master, medium devsel, latency 64, IRQ 74 Memory at dcbfd400 (32-bit, non-prefetchable) [size=256] Capabilities: [80] Power Management version 2 0000:03:01.2 System peripheral: Ricoh Co Ltd: Unknown device 0843 (rev 01) Subsystem: Dell: Unknown device 01cd Flags: bus master, medium devsel, latency 0, IRQ 9 Memory at dcbfd500 (32-bit, non-prefetchable) [size=256] Capabilities: [80] Power Management version 2 0000:03:01.3 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 0a) Subsystem: Dell: Unknown device 01cd Flags: medium devsel, IRQ 9 Memory at dcbfd600 (32-bit, non-prefetchable) [size=256] Capabilities: [80] Power Management version 2 0000:03:01.4 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 05) Subsystem: Dell: Unknown device 01cd Flags: medium devsel, IRQ 9 Memory at dcbfd700 (32-bit, non-prefetchable) [size=256] Capabilities: [80] Power Management version 2 0000:0c:00.0 Network controller: Intel Corporation: Unknown device 4222 (rev 02) Subsystem: Intel Corporation: Unknown device 1021 Flags: bus master, fast devsel, latency 0, IRQ 5 Memory at dcfff000 (32-bit, non-prefetchable) [size=4K] Capabilities: [c8] Power Management version 2 Capabilities: [d0] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable- Capabilities: [e0] #10 [0011] ** Attachment added: "The output of dmesg" http://librarian.launchpad.net/1986357/dmesg.txt -- Bluetooth not discovered on Dell Inspiron 9400 https://launchpad.net/malone/bugs/37288 From sitsofe at yahoo.com Sun Apr 9 10:47:12 2006 From: sitsofe at yahoo.com (Sitsofe Wheeler) Date: Sun, 09 Apr 2006 10:47:12 -0000 Subject: [Bug 36525] Re: bcm43xx Driver only works @ 11Mb/s References: <20060325040432.6253.74364.malonedeb@gandwana.ubuntu.com> Message-ID: <20060409104712.24486.17976.malone@gangotri.ubuntu.com> trubblelmaker: Your best bet is to try and work with the upstream developers (http://bcm43xx.berlios.de/ ) to debug the drivers they are making and push newly stablised drivers into the mainstream kernel where they will be picked up by the distros. -- bcm43xx Driver only works @ 11Mb/s https://launchpad.net/malone/bugs/36525 From eparsons at nortel.com Sun Apr 9 11:49:44 2006 From: eparsons at nortel.com (ep) Date: Sun, 09 Apr 2006 11:49:44 -0000 Subject: [Bug 38805] Re: parallel printer port References: <20060409010425.24516.88371.malonedeb@gangotri.ubuntu.com> Message-ID: <20060409114944.24486.95417.malone@gangotri.ubuntu.com> Broken means that the system is transmitting data to the printer, but the printer is printing garbled output or is ignoring the transmitted data altogether. It took me a little while to debug the problem. Sent data directly to /dev/lp0 (i think that helps eliminate a cups problem). Finally, just on a whim, reverted back to older kernel, and everything worked fine. Regarding dmesg, this is what i get in a 2.6.15-20 boot: [ 682.325974] lp0: ECP mode [ 682.331982] lp0: ECP mode [ 682.393844] lp0: ECP mode [ 684.067852] lp0: ECP mode Examining /var/log/kernel.log, I only seem to see ECP mode for -20 kernel, and not -19 or -18. -- parallel printer port https://launchpad.net/malone/bugs/38805 From rafa at dedaloingenieros.com Sun Apr 9 11:53:29 2006 From: rafa at dedaloingenieros.com (Rafael Jesus Alcantara Perez) Date: Sun, 09 Apr 2006 11:53:29 -0000 Subject: [Bug 37659] Re: [Bug 37659] Re: [Bug 37659] The IPAQ module does not support WinCE Smart-phones References: <20060402001620.23733.73589.malonedeb@gandwana.ubuntu.com> <1144520182.3414.23.camel@mirage> Message-ID: <200604091353.29749.rafa@dedaloingenieros.com> El Sábado 08 Abril 2006 20:16, Dennis Kaarsemaker escribió: > Can you please try the -20 kernel? Sure. I've found that the previous kernels were throwing these messages: Apr 1 23:20:06 localhost kernel: [4302108.122000] usb 4-1: new full speed USB device using uhci_hcd and address 5 Apr 1 23:20:07 localhost kernel: [4302108.291000] usb 4-1: device descriptor read/all, error -84 Apr 1 23:20:28 localhost kernel: [4302129.966000] usb 4-1: new full speed USB device using uhci_hcd and address 7 Apr 1 23:20:29 localhost kernel: [4302130.490000] usb 4-1: device not accepting address 7, error -71 Apr 1 23:20:58 localhost kernel: [4302159.415000] usb 4-1: new full speed USB device using uhci_hcd and address 9 Apr 1 23:20:58 localhost kernel: [4302159.545000] ipaq 4-1:1.0: PocketPC PDA converter detected Apr 1 23:20:58 localhost kernel: [4302159.546000] usb 4-1: PocketPC PDA converter now attached to ttyUSB0 Apr 1 23:20:59 localhost kernel: [4302160.458000] usb 4-1: USB disconnect, address 9 Apr 1 23:20:59 localhost kernel: [4302160.458000] ipaq 4-1:1.0: device disconnected Apr 1 23:20:59 localhost kernel: [4302160.459000] drivers/usb/serial/ipaq.c: ipaq_open - failed doing control urb, error -19 Apr 1 23:20:59 localhost kernel: [4302160.460000] ipaq ttyUSB0: PocketPC PDA converter now disconnected from ttyUSB0 Now the -20 kernel is not throwing that kind of messages although I'm not able to use synce-kde to connect with it, but I think that it's related with another bug (also reported by me) number 37658 [1] "[BUG 37658] Version too old even in Dapper (0.8.1.1-1.1build1)". So, thanks for a *very* fast response and greets for you and all your Ubuntu mates. Rafael J. Alcántara Pérez. [1] https://launchpad.net/malone/bugs/37658 -- +---------- | Rafael Jesús Alcántara Pérez | Director Técnico. | Teléfono fijo: 952 602 959 | Teléfono móvil: 661 673 272 | Fax: 952 602 959 | Dirección: C/ Afligidos 2, 3º Derecha, 29015 Málaga | Dédalo Ingenieros, S.L.: http://www.dedaloingenieros.com/ | PGP: http://pgp.rediris.es:11371/pks/lookup?op=index&search=0x53F330AB +--------------------- "For every complex problem there is a solution that is concise, clear, simple, and wrong." (H. L. Mencken) -- The IPAQ module does not support WinCE Smart-phones https://launchpad.net/malone/bugs/37659 From woho at woho.de Sun Apr 9 12:12:18 2006 From: woho at woho.de (Wolfgang Hoffmann) Date: Sun, 09 Apr 2006 12:12:18 -0000 Subject: [Bug 33230] Re: sky2 hangs on large data transfers (upstream fix available) References: <20060301081029.22115.81038.malonedeb@gandwana.ubuntu.com> Message-ID: <20060409121219.32313.39561.malone@gandwana.ubuntu.com> Now that 2.6.15-20 is out, I tried and still have problems, i.e. network hangs after a while when doing heavy transfers (sudo rmmod sky2 sudo modprobe sky2 cures the problem until the next hang ...) Status: Ubuntu 2.6.15-19 (sky2 0.11): hangs Vanilla 2.6.16-rc5 (sky2 0.15): hangs Vanilla 2.6.16-rc6 and 2.6.16 final (sky2 0.15): works Ubuntu 2.6.15-20 (sky2 1.1): hangs Ubuntu 2.6.15-20 with separately built sky2 0.15 from 2.6.16: works So it seems re-introducing MSI support into 1.1 (after 2.6.16 final was released) causes a regression for me. Anyone else seeing this? -- sky2 hangs on large data transfers (upstream fix available) https://launchpad.net/malone/bugs/33230 From achalil at gmail.com Sun Apr 9 12:36:07 2006 From: achalil at gmail.com (capacman) Date: Sun, 09 Apr 2006 12:36:07 -0000 Subject: [Bug 37784] Re: sky2 ethernet driver is freezing References: <20060402235408.5441.13560.malonedeb@gangotri.ubuntu.com> Message-ID: <20060409123607.32313.969.malone@gandwana.ubuntu.com> in linux-image-2.6.15-20 this issue fixed for me at least. It seem to be working. In the meantime bug report 33230 giving more information for this bug. Some people said that it still does not works for some systems -- sky2 ethernet driver is freezing https://launchpad.net/malone/bugs/37784 From achalil at gmail.com Sun Apr 9 12:47:50 2006 From: achalil at gmail.com (capacman) Date: Sun, 09 Apr 2006 12:47:50 -0000 Subject: [Bug 38863] sky2 driver bugy(producing lots of message) but working References: <20060409124750.24516.7194.malonedeb@gangotri.ubuntu.com> Message-ID: <20060409124750.24516.7194.malonedeb@gangotri.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 linux-image-2.6.15-20-686 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: sky2 driver version 1.1 in linux-image-2.6.15-20-686 producing lots of message in /var/log/messages like these Apr 8 23:24:06 localhost kernel: [4298477.126000] Inbound IN=eth0 OUT= MAC=00:1 1:d8:e2:3f:75:00:d0:e8:a1:26:2b:08:00 SRC=80.170.47.116 DST=10.0.0.17 LEN=47 TOS =0x00 PREC=0x00 TTL=117 ID=63858 PROTO=UDP SPT=22109 DPT=17476 LEN=27 Apr 8 23:24:09 localhost kernel: [4298480.101000] Inbound IN=eth0 OUT= MAC=00:1 1:d8:e2:3f:75:00:d0:e8:a1:26:2b:08:00 SRC=80.170.47.116 DST=10.0.0.17 LEN=52 TOS =0x00 PREC=0x00 TTL=117 ID=63866 DF PROTO=TCP SPT=1671 DPT=17476 WINDOW=32767 RE S=0x00 SYN URGP=0 Apr 8 23:24:15 localhost kernel: [4298486.136000] Inbound IN=eth0 OUT= MAC=00:1 1:d8:e2:3f:75:00:d0:e8:a1:26:2b:08:00 SRC=80.170.47.116 DST=10.0.0.17 LEN=52 TOS =0x00 PREC=0x00 TTL=117 ID=63885 DF PROTO=TCP SPT=1671 DPT=17476 WINDOW=32767 RE S=0x00 SYN URGP=0 Apr 8 23:24:20 localhost kernel: [4298490.851000] Inbound IN=eth0 OUT= MAC=00:1 1:d8:e2:3f:75:00:d0:e8:a1:26:2b:08:00 SRC=81.214.224.172 DST=10.0.0.17 LEN=48 TO S=0x00 PREC=0x00 TTL=120 ID=14353 DF PROTO=TCP SPT=2791 DPT=445 WINDOW=65535 RES =0x00 SYN URGP=0 Apr 8 23:24:23 localhost kernel: [4298493.849000] Inbound IN=eth0 OUT= MAC=00:1 1:d8:e2:3f:75:00:d0:e8:a1:26:2b:08:00 SRC=81.214.224.172 DST=10.0.0.17 LEN=48 TO S=0x00 PREC=0x00 TTL=120 ID=14616 DF PROTO=TCP SPT=2791 DPT=445 WINDOW=65535 RES =0x00 SYN URGP=0 incresing cpu usage and cause lots of i/o. -- sky2 driver bugy(producing lots of message) but working https://launchpad.net/malone/bugs/38863 From achalil at gmail.com Sun Apr 9 12:57:52 2006 From: achalil at gmail.com (capacman) Date: Sun, 09 Apr 2006 12:57:52 -0000 Subject: [Bug 38865] sky2 driver freezing system after ifdown and ifup References: <20060409125752.32313.97119.malonedeb@gandwana.ubuntu.com> Message-ID: <20060409125752.32313.97119.malonedeb@gandwana.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 linux-image-2.6.15-20-686 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: My system is freezing when i issue command sudo ifdown eth0 sudo ifup eth0 This did not happen in linux-image-2.6.15-19-686. I tried same commands in different computer with different ethernet card and it works. I think the problem is related to sky2 driver. This is the output in /var/log/messages when issue those commands: Apr 9 01:48:16 localhost kernel: [4301524.091000] sky2 eth0: disabling interface Apr 9 01:48:16 localhost kernel: [4301524.136000] sky2 eth0: enabling interface Apr 9 01:48:17 localhost kernel: [4301525.786000] sky2 eth0: Link is up at 100 Mbps, full duplex, flow control both Apr 9 01:49:33 localhost syslogd 1.4.1#17ubuntu5: restart. I have to restart after those commands. -- sky2 driver freezing system after ifdown and ifup https://launchpad.net/malone/bugs/38865 From bastian.doetsch at gmx.de Sun Apr 9 13:05:10 2006 From: bastian.doetsch at gmx.de (Bastian Doetsch) Date: Sun, 09 Apr 2006 13:05:10 -0000 Subject: [Bug 38731] Re: Cannot delete on external FAT USB Drive References: <20060408133124.32313.1153.malonedeb@gandwana.ubuntu.com> Message-ID: <20060409130510.32313.22601.malone@gandwana.ubuntu.com> I reformatted it to ext3, nonetheless the issue remains, why it is suddenly corrupted. Thanx for your help, though :-). -- Cannot delete on external FAT USB Drive https://launchpad.net/malone/bugs/38731 From punkrockguy318 at comcast.net Sun Apr 9 13:15:03 2006 From: punkrockguy318 at comcast.net (Lukas Sabota) Date: Sun, 09 Apr 2006 13:15:03 -0000 Subject: [Bug 38780] Re: Floppy module NOT loaded References: <20060408194430.24486.53632.malonedeb@gangotri.ubuntu.com> Message-ID: <20060409131503.32313.8537.malone@gandwana.ubuntu.com> Yes, the latest 20-686 kernel. -- Floppy module NOT loaded https://launchpad.net/malone/bugs/38780 From chris at csamuel.org Sun Apr 9 13:28:45 2006 From: chris at csamuel.org (Chris Samuel) Date: Sun, 09 Apr 2006 13:28:45 -0000 Subject: [Bug 24050] Re: 2.6.12-9-686 and SMP kernel and Ubuntu Live CD Panic During Boot with DPT/Adaptec I2O Controller - Cause: Loads both dpt_i2o and the i2o drivers. References: <20060113142703.21012.14769.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060409132845.32233.54011.malone@gandwana.ubuntu.com> I can confirm that this is now fine - finally upgraded to Dapper. Thanks! -- 2.6.12-9-686 and SMP kernel and Ubuntu Live CD Panic During Boot with DPT/Adaptec I2O Controller - Cause: Loads both dpt_i2o and the i2o drivers. https://launchpad.net/malone/bugs/24050 From x at cs.stanford.edu Sun Apr 9 13:37:21 2006 From: x at cs.stanford.edu (Dan Sandberg) Date: Sun, 09 Apr 2006 13:37:21 -0000 Subject: [Bug 22409] Re: network-admin displays duplicate adapter info, doesn't remember settings References: <20060113141810.21012.406.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060409133721.32313.38974.malone@gandwana.ubuntu.com> Unfortunately I don't have time to upgrade and see if the problem persists. Perhaps you should close the case, and when I (eventually) upgrade to Dapper I will re-open it if the problem recurrs. -- network-admin displays duplicate adapter info, doesn't remember settings https://launchpad.net/malone/bugs/22409 From sitsofe at yahoo.com Sun Apr 9 13:51:28 2006 From: sitsofe at yahoo.com (Sitsofe Wheeler) Date: Sun, 09 Apr 2006 13:51:28 -0000 Subject: [Bug 37056] Re: There should be several nVIDIA driver packages References: <20060328193442.6253.19683.malonedeb@gandwana.ubuntu.com> Message-ID: <20060409135128.24486.15471.malone@gangotri.ubuntu.com> The extra restricted drivers take up a nelgible amount of extra space. Heck the entire kernel is chock full of "unused" drivers but in this day and age it is complete false economy to split things up on a desktop system. -- There should be several nVIDIA driver packages https://launchpad.net/malone/bugs/37056 From personalnadir at gmail.com Sun Apr 9 14:29:04 2006 From: personalnadir at gmail.com (mystical) Date: Sun, 09 Apr 2006 14:29:04 -0000 Subject: [Bug 38880] Boot Hangs at "BIOS data check successful" References: <20060409142904.32313.92361.malonedeb@gandwana.ubuntu.com> Message-ID: <20060409142904.32313.92361.malonedeb@gandwana.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: I recently installed Breezy and had it working nicely. My flat mate persuaded me that I ought to upgrade to Dapper as its release is a mere couple of months away. Once I had completed the migration process I rebooted, but the system never got beyond "BIOS data check successful", at which it remains. No sign of life what so ever. Welcome to kernel 2.6.15-19. So I restarted my machine and booted using the old Breezy kernel (2.6.12-9 I think) and it loaded (it moaned a lot, but it got GNOME running) and I saw the Dapper logo. Sure USB no longer worked (no mouse, no wlan) and GNOME was moaning about hardware-monitor, but I was ble to try installing the image again. Same result. Today I booted into XP, downloaded 2.6.15-20, copied it across and installed it. Same result except that it got rid of the Breezy kernel which was still working. I now have the choice of two kernels which wont get beyond the "BIOS data check successful" stage of things. A quick google shows that this seems to be a recurrant problem in Linux. My specs: Athlon XP 2600 1 GB ram nForce 2 motherboard Nvidia 6600GT AGP card I've got Linux installed on an XFs partition and I'm using the Lilo bootloader. As said Breezy worked fine. The only solution I've come accross is to: "comment out call to store_edid in arch/i386/boot/video.S" which I'll probably try next week when I've time and I know what it's doing. -- Boot Hangs at "BIOS data check successful" https://launchpad.net/malone/bugs/38880 From greblus at wp.pl Sun Apr 9 14:46:01 2006 From: greblus at wp.pl (Wiktor Grebla) Date: Sun, 09 Apr 2006 14:46:01 -0000 Subject: [Bug 38884] rtl818x - System hangs when uploading files. References: <20060409144601.32233.18688.malonedeb@gandwana.ubuntu.com> Message-ID: <20060409144601.32233.18688.malonedeb@gandwana.ubuntu.com> Public bug reported: Affects: linux-meta linux-image-2.6-k7 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: Today i was trying to upload some files to the ftp server and my computer died without any feedback, no oopses, nothing on the screen (tried on a text terminal, outside of my X session). I've noticed that it happens when uploading files bigger than a few kilobytes, and only on k7 kernel images. 2.6.15-20-386 works fine. The lspci reports my card is a: 0000:01:08.0 Ethernet controller: D-Link System Inc DWL-510 2.4GHz Wireless PCI Adapter (rev 20) -- rtl818x - System hangs when uploading files. https://launchpad.net/malone/bugs/38884 From dennis at kaarsemaker.net Sun Apr 9 15:17:53 2006 From: dennis at kaarsemaker.net (Dennis Kaarsemaker) Date: Sun, 09 Apr 2006 15:17:53 -0000 Subject: [Bug 38884] Re: rtl818x - System hangs when uploading files. References: <20060409144601.32233.18688.malonedeb@gandwana.ubuntu.com> Message-ID: <20060409151753.32313.14639.launchpad@gandwana.ubuntu.com> ** Changed in: linux-meta linux-image-2.6-k7 (Ubuntu) Sourcepackagename: linux-meta => linux-source-2.6.15 Binarypackagename: linux-image-2.6-k7 => None -- rtl818x - System hangs when uploading files. https://launchpad.net/malone/bugs/38884 From launchpad at rtr.ca Sun Apr 9 15:33:15 2006 From: launchpad at rtr.ca (Mark Lord) Date: Sun, 09 Apr 2006 15:33:15 -0000 Subject: [Bug 35134] Re: Resume (from RAM) fails References: <20060315230705.11105.24738.malonedeb@gandwana.ubuntu.com> Message-ID: <20060409153315.24486.67814.malone@gangotri.ubuntu.com> Just now, I did a fresh install from the 09-April-2006 daily build, plus all current updates for Ubuntu and Kubuntu-Desktop. Suspend-to-RAM works, but Resume-from-RAM experiences a short delay (a driver timeout in libata is suspected), and then the USB mouse lights up (working), and the hard disk light locks on solid. The display backlight never comes on, so no messages are visible, and the system is not functioning. Alt-SysRq-B works (reboot), so it's not a total hard lockup. It really looks like the libata hard disk device is not surviving the resume operation. I may eventually apply Randy Dunlop's libata-acpi patchset and see if that cures it. Cheers ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Needs Info => Confirmed -- Resume (from RAM) fails https://launchpad.net/malone/bugs/35134 From acornejo at ieee.org Sun Apr 9 15:49:54 2006 From: acornejo at ieee.org (Alejandro Cornejo) Date: Sun, 09 Apr 2006 15:49:54 -0000 Subject: [Bug 38688] Re: unable to boot References: <20060408070420.32313.56814.malonedeb@gandwana.ubuntu.com> Message-ID: <20060409154955.32233.65215.launchpad@gandwana.ubuntu.com> ** Changed in: linux-source-2.6.15 linux-image-2.6.15-20-amd64-k8 (Ubuntu) Severity: Normal => Critical -- unable to boot https://launchpad.net/malone/bugs/38688 From mathieu.hopmann at gmail.com Sun Apr 9 15:51:06 2006 From: mathieu.hopmann at gmail.com (Mathieu Hopmann) Date: Sun, 09 Apr 2006 15:51:06 -0000 Subject: [Bug 38897] Missing keyboard References: <20060409155106.24516.37151.malonedeb@gangotri.ubuntu.com> Message-ID: <20060409155106.24516.37151.malonedeb@gangotri.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 linux-image-2.6.15-20-686 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: I try this morning the kernel 2.6.15-20-686 (previously I was on a 2.6.15-20-386 without any problem) and my PS2 peripherics don't work at all (keyboard/mouse). So I can't log in in gdm. I try with an USB Mouse, and it works perfectly. -- Missing keyboard https://launchpad.net/malone/bugs/38897 From mjg59 at codon.org.uk Sun Apr 9 15:53:35 2006 From: mjg59 at codon.org.uk (Matthew Garrett) Date: Sun, 09 Apr 2006 15:53:35 -0000 Subject: [Bug 35134] Re: Resume (from RAM) fails References: <20060315230705.11105.24738.malonedeb@gandwana.ubuntu.com> Message-ID: <20060409155335.24516.48948.malone@gangotri.ubuntu.com> If you could try that, that would be great. Our libata resume patches are fairly old. -- Resume (from RAM) fails https://launchpad.net/malone/bugs/35134 From mlord at pobox.com Sun Apr 9 16:04:05 2006 From: mlord at pobox.com (Mark Lord) Date: Sun, 09 Apr 2006 16:04:05 -0000 Subject: [Bug 35134] Re: [Bug 35134] Re: Resume (from RAM) fails References: <20060315230705.11105.24738.malonedeb@gandwana.ubuntu.com> <20060409155335.24516.48948.malone@gangotri.ubuntu.com> Message-ID: <44393075.8040401@pobox.com> Matthew Garrett wrote: > If you could try that, that would be great. Our libata resume patches are fairly old. I'm working on it now. As a first step, I'm copying over the patched 2.6.16 kernelt that works flawlessly for me using Breezy. If that fixes it, then we can work out a patchset. If it fails, then there's something else at play here (different drives..). Cheers -- Mark Lord Real-Time Remedies Inc. mlord at pobox.com -- Resume (from RAM) fails https://launchpad.net/malone/bugs/35134 From dennis at kaarsemaker.net Sun Apr 9 16:10:42 2006 From: dennis at kaarsemaker.net (Dennis Kaarsemaker) Date: Sun, 09 Apr 2006 16:10:42 -0000 Subject: [Bug 38688] Re: unable to boot References: <20060408070420.32313.56814.malonedeb@gandwana.ubuntu.com> Message-ID: <20060409161042.24516.48408.malone@gangotri.ubuntu.com> May be udev bøg, subscribing Scott. ** Changed in: linux-source-2.6.15 linux-image-2.6.15-20-amd64-k8 (Ubuntu) Binarypackagename: linux-image-2.6.15-20-amd64-k8 => None Severity: Critical => Normal -- unable to boot https://launchpad.net/malone/bugs/38688 From joan at laigu.net Sun Apr 9 16:25:11 2006 From: joan at laigu.net (Joan) Date: Sun, 09 Apr 2006 16:25:11 -0000 Subject: [Bug 37452] Re: fusion mpt sas driver does not find a RAID1 disk during installation(Sun Galaxy X4200 and X4100) References: <20060331083135.5415.666.malonedeb@gangotri.ubuntu.com> Message-ID: <20060409162511.24516.43509.malone@gangotri.ubuntu.com> I can confirm this bug. It also happens on my X4200 using Hardware RAID1. Now I've installed Dapper using software RAID1 and it works as expected. Joan -- fusion mpt sas driver does not find a RAID1 disk during installation(Sun Galaxy X4200 and X4100) https://launchpad.net/malone/bugs/37452 From filcab at gmail.com Sun Apr 9 17:13:18 2006 From: filcab at gmail.com (FilCab) Date: Sun, 09 Apr 2006 17:13:18 -0000 Subject: [Bug 37056] Re: [Bug 37056] Re: There should be several nVIDIA driver packages References: <20060328193442.6253.19683.malonedeb@gandwana.ubuntu.com> <20060409135128.24486.15471.malone@gangotri.ubuntu.com> Message-ID: No it isn't if you think about how you could have several different versions of the nvidia (for example) drivers, so one could choose one that was: a) Recent. b) Work with his/her graphics board. On 4/9/06, Sitsofe Wheeler wrote: > The extra restricted drivers take up a nelgible amount of extra space. Heck the entire kernel is chock full of "unused" drivers but in this day and age it is complete false economy to split things up on a desktop system. > -- > There should be several nVIDIA driver packages > https://launchpad.net/malone/bugs/37056 > -- There should be several nVIDIA driver packages https://launchpad.net/malone/bugs/37056 From edal at freestart.hu Sun Apr 9 17:14:06 2006 From: edal at freestart.hu (edal) Date: Sun, 09 Apr 2006 17:14:06 -0000 Subject: [Bug 2962] Re: Register of Power Status Change Requires Removal & Reinsertion of Battery References: <20051008140639.14682.11809.malonedeb@gangotri.ubuntu.com> Message-ID: <20060409171406.32233.46011.malone@gandwana.ubuntu.com> I suspect that this latest chapter in the problem may be 'pilot error' as I am not a Linux expert. Could somebody please tell me where I am making an incorrect command? I launched gconf and went to the Gnome Power Monitor. The box to display an icon on the desktop was not ticked so I ticked it. All other boxes were already ticked in this section. >From a root terminal screen I entered the command 'gnome-power-manager' And nothing happened. Nothing came back on the terminal screen, it just returned me to the next line, and there is no icon yet for the Gnome Power Manager. The original problem with the Battery Status Monitor is of course still remaining. Ed Almos -- Register of Power Status Change Requires Removal & Reinsertion of Battery https://launchpad.net/malone/bugs/2962 From mkjclifford at hotmail.com Sun Apr 9 17:21:00 2006 From: mkjclifford at hotmail.com (TheCliftser) Date: Sun, 09 Apr 2006 17:21:00 -0000 Subject: [Bug 38908] kernel panic on boot References: <20060409172100.24516.31977.malonedeb@gangotri.ubuntu.com> Message-ID: <20060409172100.24516.31977.malonedeb@gangotri.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: I have a old pc. Asus Motherboard, 512 Ram, with Win XP Home on it a reasonably new build with all patches (nothing else except Office and wireless drivers). I want to preserve winxp in a partition and install UBUNTU on the other partition. I am following the install and partition instructions for NTFS: http://users.bigpond.net.au/hermanzone/p3.htm to install UBUNTU and found that after enter I get the error as listed ibelow; I got the CDs direct from UBUNTU and have tried three CDs so it is not the CD ( not a scratch or summut) Error: 4294668:920000 Kernel Panic, - Not Syncing: No init Found - Passing Init option = 0 to kernel 4294668:920000 _ ( it hangs here) The live cd works and boots but I really want a partioned install. -- kernel panic on boot https://launchpad.net/malone/bugs/38908 From jhaukkala at yahoo.com Sun Apr 9 17:50:48 2006 From: jhaukkala at yahoo.com (Jaakko Haukkala) Date: Sun, 09 Apr 2006 17:50:48 -0000 Subject: [Bug 28406] Re: Acer 1362LC suspend to ram doesn't wake up References: <20060113152219.29386.83071.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060409175048.24516.26442.malone@gangotri.ubuntu.com> I don't know if this is supposed to work in live cd, but I tested this problem against dapper flight 6 live. The final result is still the same, i.e. computer doesn't respond after resume, but now the led which indicates the sleep mode goes off and hard drive and cd tries to read something before the computer stops responding. -- Acer 1362LC suspend to ram doesn't wake up https://launchpad.net/malone/bugs/28406 From mark at hanoverbeacon.org Sun Apr 9 18:22:16 2006 From: mark at hanoverbeacon.org (markginter24) Date: Sun, 09 Apr 2006 18:22:16 -0000 Subject: [Bug 38913] No temperature reported References: <20060409182217.32313.93275.malonedeb@gandwana.ubuntu.com> Message-ID: <20060409182217.32313.93275.malonedeb@gandwana.ubuntu.com> Public bug reported: Affects: linux-meta linux-386 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: with the stock kernel (i386) and also with the k7 kernel - neither shows a temperature with the Sempron chip in my laptop. It reports as 0 C -- which, of course - is wrong. -- No temperature reported https://launchpad.net/malone/bugs/38913 From launchpad at rtr.ca Sun Apr 9 19:09:09 2006 From: launchpad at rtr.ca (Mark Lord) Date: Sun, 09 Apr 2006 19:09:09 -0000 Subject: [Bug 35134] Re: Resume (from RAM) fails References: <20060315230705.11105.24738.malonedeb@gandwana.ubuntu.com> Message-ID: <20060409190909.24486.19112.malone@gangotri.ubuntu.com> With my patched 2.6.16 kernel ( http://rtr.ca/dell_i9300/kernel/kernel-2.6.16/ ) the suspend/resume work perfectly, without the issue documented here. I tried bringing Randy's newer libata-acpi stuff over to the Ubuntu 2.6.15+ kernel, but it clashed with an older version already there -- I did manage to hand-patch it in, but it only worked some of the time, not all of the time on resume. I may try again later, by first removing the old Randy code completely, and then adding in his latest for 2.6.15, which I still have a copy of here. On a related note: the video (ATI X300) fails resume on Dapper unless I remove the "dri" section from /etc/X11/xorg.conf. But that's a different bug, I suppose. Cheers -- Resume (from RAM) fails https://launchpad.net/malone/bugs/35134 From steve at hollows2.plus.com Sun Apr 9 19:30:01 2006 From: steve at hollows2.plus.com (Steve Hollowell) Date: Sun, 09 Apr 2006 19:30:01 -0000 Subject: [Bug 38238] Re: prism54 no longer works References: <20060405180221.24486.72499.malonedeb@gangotri.ubuntu.com> Message-ID: <20060409193001.24486.55513.malone@gangotri.ubuntu.com> *** This bug is a duplicate of bug 38278 *** Same problem for me using an ALL0271 wireless PCI adapter - Prism GT/Prism Duette. Worked OK under 19. -- prism54 no longer works https://launchpad.net/malone/bugs/38238 From susancragin at earthlink.net Sun Apr 9 19:52:04 2006 From: susancragin at earthlink.net (susancragin) Date: Sun, 09 Apr 2006 19:52:04 -0000 Subject: [Bug 38766] Re: [bcm43xx] Wireless not properly detected. References: <20060408175151.24516.78847.malonedeb@gangotri.ubuntu.com> Message-ID: <20060409195204.32313.89794.launchpad@gandwana.ubuntu.com> ** Attachment added: "dmesg attachment" http://librarian.launchpad.net/1988799/dmesg.txt ** Attachment added: "lspci as per your request" http://librarian.launchpad.net/1988800/lxpci.txt -- [bcm43xx] Wireless not properly detected. https://launchpad.net/malone/bugs/38766 From ivan.matveich at gmail.com Sun Apr 9 21:04:09 2006 From: ivan.matveich at gmail.com (Ivan Matveich) Date: Sun, 09 Apr 2006 21:04:09 -0000 Subject: [Bug 36525] Re: bcm43xx Driver only works @ 11Mb/s References: <20060325040432.6253.74364.malonedeb@gandwana.ubuntu.com> Message-ID: <20060409210409.32233.94710.malone@gandwana.ubuntu.com> trubblelmaker, The ibook's wireless chipset is indeed a bcm4306; the access point is atheros. So it's worth a shot to try that configuration. -- bcm43xx Driver only works @ 11Mb/s https://launchpad.net/malone/bugs/36525 From mail at carthik.net Sun Apr 9 21:16:04 2006 From: mail at carthik.net (Carthik Sharma) Date: Sun, 09 Apr 2006 21:16:04 -0000 Subject: [Bug 23478] Re: Breezy won't recover from hibernation on ThinkPad T42 References: <20060113142354.21012.49262.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060409211604.24516.10175.malone@gangotri.ubuntu.com> Changing to Fixed since there has been no response regarding whether this works in Dapper. If you still have an issue please reopen this bug. Thank you for the beg report. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Needs Info => Fix Released -- Breezy won't recover from hibernation on ThinkPad T42 https://launchpad.net/malone/bugs/23478 From mail at carthik.net Sun Apr 9 21:22:55 2006 From: mail at carthik.net (Carthik Sharma) Date: Sun, 09 Apr 2006 21:22:55 -0000 Subject: [Bug 24459] Re: cardbus has no power References: <20060113142910.21012.72871.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060409212255.24486.83089.malone@gangotri.ubuntu.com> Thank you for reporting this bug. Does the issue still exist with the latest Dapper Flight 6 CDs? If not, please let us know so this bug can closed. -- cardbus has no power https://launchpad.net/malone/bugs/24459 From mail at carthik.net Sun Apr 9 21:32:11 2006 From: mail at carthik.net (Carthik Sharma) Date: Sun, 09 Apr 2006 21:32:11 -0000 Subject: [Bug 24925] Re: Unlink after no-IRQ References: <20060113143135.21012.9317.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060409213211.24516.8746.malone@gangotri.ubuntu.com> Daniel, Thanks for reporting this bug. Can you please confirm whether this bug persists with the latest Dapper packages. You could try reinstalling using the Dapper Flight 6 CD, or do a dist-upgrade to dapper. Thanks again. -- Unlink after no-IRQ https://launchpad.net/malone/bugs/24925 From plush at optonline.net Sun Apr 9 21:40:02 2006 From: plush at optonline.net (plush) Date: Sun, 09 Apr 2006 21:40:02 -0000 Subject: [Bug 33024] Re: bcm43xx driver trying to allocate DMA memory above 1G References: <20060227101031.16580.69564.malonedeb@gandwana.ubuntu.com> Message-ID: <20060409214002.24486.99714.malone@gangotri.ubuntu.com> What, Ben, who? No ndiswrapper is for x86 only, not powerPC. I use the built-in bcm43xx driver (using SOFTMac?) in the kernel. -- bcm43xx driver trying to allocate DMA memory above 1G https://launchpad.net/malone/bugs/33024 From plush at optonline.net Sun Apr 9 21:50:02 2006 From: plush at optonline.net (plush) Date: Sun, 09 Apr 2006 21:50:02 -0000 Subject: [Bug 33024] Re: bcm43xx driver trying to allocate DMA memory above 1G References: <20060227101031.16580.69564.malonedeb@gandwana.ubuntu.com> Message-ID: <20060409215002.32233.82730.malone@gandwana.ubuntu.com> Oops, nevermind :), I was linked to this , thought I was commenting to comments on my own bug that apparently is a dup of this... -- bcm43xx driver trying to allocate DMA memory above 1G https://launchpad.net/malone/bugs/33024 From feenixx at hotmail.com Sun Apr 9 22:33:48 2006 From: feenixx at hotmail.com (mlind) Date: Sun, 09 Apr 2006 22:33:48 -0000 Subject: [Bug 38937] Kernel being noisy at boottime References: <20060409223348.24516.87248.malonedeb@gangotri.ubuntu.com> Message-ID: <20060409223348.24516.87248.malonedeb@gangotri.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: With every Dapper kernel, I've seen brief dmesg output like hdc: drive_cmd: status=0x51 { DriveReady SeekComplete Error } [4294702.815000] hdc: drive_cmd: error=0x04 { AbortedCommand } [4294702.815000] ide: failed opcode was: 0xec [4294702.847000] hdd: drive_cmd: status=0x51 { DriveReady SeekComplete Error } [4294702.847000] hdd: drive_cmd: error=0x04 { AbortedCommand } [4294702.847000] ide: failed opcode was: 0xec [4294703.032000] hdc: drive_cmd: status=0x51 { DriveReady SeekComplete Error } [4294703.032000] hdc: drive_cmd: error=0x04 { AbortedCommand } [4294703.032000] ide: failed opcode was: 0xec [4294703.063000] hdd: drive_cmd: status=0x51 { DriveReady SeekComplete Error } [4294703.063000] hdd: drive_cmd: error=0x04 { AbortedCommand } [4294703.063000] ide: failed opcode was: 0xec So this currently applies on 2.6.15-20-k7 kernel. hdc == my LG DVD burner *-cdrom:0 description: DVD-RAM writer product: HL-DT-ST DVDRAM GSA-4163B physical id: 0 bus info: ide at 1.0 logical name: /dev/hdc version: A105 serial: K784CD95152 capabilities: packet atapi cdrom removable nonmagnetic dma lba iordy pm audio cd-r cd-rw dvd dvd-r dvd-ram configuration: mode=udma2 *-disc physical id: 0 logical name: /dev/hdc Its firmware should be up-to-date. -- Kernel being noisy at boottime https://launchpad.net/malone/bugs/38937 From campbell.kc at gmail.com Sun Apr 9 23:21:35 2006 From: campbell.kc at gmail.com (Kevin) Date: Sun, 09 Apr 2006 23:21:35 -0000 Subject: [Bug 38305] after sleep networking doesn't work References: <20060406004637.24516.46963.malonedeb@gangotri.ubuntu.com> Message-ID: <20060409232135.32313.9147.launchpad@canonical@gandwana.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: After I put my laptop to sleep and return from sleep, the networking does not work. If I try sudo ifup eth0 it does not work. Network manager reports that there are no network interfaces found. Hibernate works fine, but the only way to fix this after sleep is to restart the computer. The laptop is a Gateway m505x, with intel wireless 2100 and realtek rtl-8139. Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: After I put my laptop to sleep and return from sleep, the networking does not work. If I try sudo ifup eth0 it does not work. Network manager reports that there are no network interfaces found. Hibernate works fine, but the only way to fix this after sleep is to restart the computer. The laptop is a Gateway m505x, with intel wireless 2100 and realtek rtl-8139. -- after sleep networking doesn't work https://launchpad.net/malone/bugs/38305 From campbell.kc at gmail.com Sun Apr 9 23:21:35 2006 From: campbell.kc at gmail.com (Kevin) Date: Sun, 09 Apr 2006 23:21:35 -0000 Subject: [Bug 38305] Re: after sleep networking doesn't work References: <20060406004637.24516.46963.malonedeb@gangotri.ubuntu.com> Message-ID: <20060409232135.32313.95391.launchpad@gandwana.ubuntu.com> ** Changed in: Ubuntu Sourcepackagename: None => linux-source-2.6.15 -- after sleep networking doesn't work https://launchpad.net/malone/bugs/38305 From campbell.kc at gmail.com Sun Apr 9 23:32:58 2006 From: campbell.kc at gmail.com (Kevin) Date: Sun, 09 Apr 2006 23:32:58 -0000 Subject: [Bug 38305] Re: after sleep networking doesn't work References: <20060406004637.24516.46963.malonedeb@gangotri.ubuntu.com> Message-ID: <20060409233258.32233.26942.malone@gandwana.ubuntu.com> To be more clear on a couple things: Hibernate works perfectly, everything works fine. Sleep works perfectly on everything, except neither wired nor wireless networking works on resume. This happened both using network-manager, and before that using basic gnome networking tools. When I try a sudo ifup eth0 (wireless), or sudo ifup eth1 (wired) it simply reports "Ignoring unknown interface eth0=eth0" This is all using a fully updated Dapper, with the 2.6.15-19 kernel. -- after sleep networking doesn't work https://launchpad.net/malone/bugs/38305 From mail at carthik.net Mon Apr 10 00:02:06 2006 From: mail at carthik.net (Carthik Sharma) Date: Mon, 10 Apr 2006 00:02:06 -0000 Subject: [Bug 16955] Re: cs: pcmcia_socket0: unable to apply power References: <20060113134906.21012.63580.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060410000206.24516.30527.malone@gangotri.ubuntu.com> Closing this bug since the original reporter hasn't provided feedback for over three months. Please feel free to reopen this bug if the issue still exists with the current Dapper kernel. Thank you for reporting this bug. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Needs Info => Fix Released -- cs: pcmcia_socket0: unable to apply power https://launchpad.net/malone/bugs/16955 From christer.edwards at gmail.com Mon Apr 10 00:41:42 2006 From: christer.edwards at gmail.com (kuyaedz) Date: Mon, 10 Apr 2006 00:41:42 -0000 Subject: [Bug 38947] sound card not detected References: <20060410004142.24486.11010.malonedeb@gangotri.ubuntu.com> Message-ID: <20060410004142.24486.11010.malonedeb@gangotri.ubuntu.com> Public bug reported: Affects: linux-meta linux-image-k7 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: Sound Blaster Live 5.1 card is not detected in latest Dapper. It was working in another machine just earlier today using latest 386/686 kernel. After being moved to SMP machine it is not recognized. -- sound card not detected https://launchpad.net/malone/bugs/38947 From christer.edwards at gmail.com Mon Apr 10 00:53:09 2006 From: christer.edwards at gmail.com (kuyaedz) Date: Mon, 10 Apr 2006 00:53:09 -0000 Subject: [Bug 38947] Re: sound card not detected References: <20060410004142.24486.11010.malonedeb@gangotri.ubuntu.com> Message-ID: <20060410005309.32233.30786.malone@gandwana.ubuntu.com> resolved issue. ** Changed in: linux-meta linux-image-k7 (Ubuntu) Status: Unconfirmed => Rejected -- sound card not detected https://launchpad.net/malone/bugs/38947 From mail at carthik.net Mon Apr 10 00:56:31 2006 From: mail at carthik.net (Carthik Sharma) Date: Mon, 10 Apr 2006 00:56:31 -0000 Subject: [Bug 19551] Re: Constant High SoftIRQ References: <20060113140216.21012.34728.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060410005631.24486.42257.malone@gangotri.ubuntu.com> Thank you for reporting this bug. I am closing this bug since there has been no response for over 3 months. However, should the bug still exist when using the latest kernel in Dapper, please feel free to reopen this. Thanks again! ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Needs Info => Rejected -- Constant High SoftIRQ https://launchpad.net/malone/bugs/19551 From mail at carthik.net Mon Apr 10 01:03:10 2006 From: mail at carthik.net (Carthik Sharma) Date: Mon, 10 Apr 2006 01:03:10 -0000 Subject: [Bug 20069] Re: ACX Chipset Wireless Problem References: <20060113140510.21012.85038.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060410010310.24486.27556.malone@gangotri.ubuntu.com> Can you reproduce this problem with the packages in the latest Dapper Flight CD 6? Please let us know if this is not a bug anymore and we can close this. Thank you for reporting this. -- ACX Chipset Wireless Problem https://launchpad.net/malone/bugs/20069 From mail at carthik.net Mon Apr 10 01:34:12 2006 From: mail at carthik.net (Carthik Sharma) Date: Mon, 10 Apr 2006 01:34:12 -0000 Subject: [Bug 22740] Re: high speed USB devices fail to work - intermittently References: <20060113141956.21012.93958.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060410013412.24486.90956.malone@gangotri.ubuntu.com> I am cloding this bug since there has been no response from the reporter for over 3 months. If the bug still exists when using the kernels provided in the latest Dapper Flight CD, please reopen this bug. Thank you for reporting this bug. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Needs Info => Fix Released -- high speed USB devices fail to work - intermittently https://launchpad.net/malone/bugs/22740 From mail at carthik.net Mon Apr 10 01:31:23 2006 From: mail at carthik.net (Carthik Sharma) Date: Mon, 10 Apr 2006 01:31:23 -0000 Subject: [Bug 22590] Re: Unreadable framebuffer text with vga16fb on ThinkPad X30 References: <20060113141910.21012.16189.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060410013123.32313.95626.malone@gandwana.ubuntu.com> Thank you for reporting this bug. I am closing this bug since there has been no response regarding whether the latest Dapper kernel fixed the issue for the reporter. Please reopen this if the bug still bugs you. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Needs Info => Fix Released -- Unreadable framebuffer text with vga16fb on ThinkPad X30 https://launchpad.net/malone/bugs/22590 From mail at carthik.net Mon Apr 10 01:37:17 2006 From: mail at carthik.net (Carthik Sharma) Date: Mon, 10 Apr 2006 01:37:17 -0000 Subject: [Bug 23225] Re: Sony Vaio VGN-A190 doesn't power off without nolapic References: <20060113142235.21012.63046.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060410013717.24486.49318.malone@gangotri.ubuntu.com> Esac, Could you please confirm whether this bug exists when using the kernel provided in the latest Dapper Flight CD (6)? Thank you for reporting this bug and following up on it. -- Sony Vaio VGN-A190 doesn't power off without nolapic https://launchpad.net/malone/bugs/23225 From cquilliam at gmail.com Mon Apr 10 02:28:05 2006 From: cquilliam at gmail.com (cquilliam) Date: Mon, 10 Apr 2006 02:28:05 -0000 Subject: [Bug 34209] Re: 2.6.15-17-k7 doesn't boot on Athlon 2000+ References: <20060309134308.29403.37559.malonedeb@gangotri.ubuntu.com> Message-ID: <20060410022805.32233.66337.malone@gandwana.ubuntu.com> I get the exact same result on my Athlon 1800+. I downloaded the ubuntu-server iso of flight6, install went through just fine, but have the same problem as the above listed. I attempted passing several things to the boot line like "noapic", "nolapic", "acpi=off", "nosplash", nothing seems to work. -- 2.6.15-17-k7 doesn't boot on Athlon 2000+ https://launchpad.net/malone/bugs/34209 From badcdev at gmail.com Mon Apr 10 02:34:48 2006 From: badcdev at gmail.com (Stuart Dalton) Date: Mon, 10 Apr 2006 02:34:48 -0000 Subject: [Bug 33096] Re: "DVICO Fusion HDTV DVB Plus" tv tuner card will not lock on to channel References: <20060227230332.16580.85365.malonedeb@gandwana.ubuntu.com> Message-ID: <20060410023448.24516.81448.malone@gangotri.ubuntu.com> I recently upgraded to Dapper, and had the same problems with my DVICO Fusion HDTV Plus card. The same driver modification appears to have fixed the problem. -- "DVICO Fusion HDTV DVB Plus" tv tuner card will not lock on to channel https://launchpad.net/malone/bugs/33096 From shifted at shifted.ca Mon Apr 10 02:43:56 2006 From: shifted at shifted.ca (Mark Rose) Date: Mon, 10 Apr 2006 02:43:56 -0000 Subject: [Bug 25091] Re: alsa no longer works with Breezy References: <20060113143224.21012.21291.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060410024356.32233.51351.malone@gandwana.ubuntu.com> I no longer have the same hardware configuration or the time to test. I solved the problem by removing the TV Tuner card from the system (it's a bt878-based card by Zoltrix). -- alsa no longer works with Breezy https://launchpad.net/malone/bugs/25091 From crimsun at fungus.sh.nu Mon Apr 10 03:07:46 2006 From: crimsun at fungus.sh.nu (Daniel T. Chen) Date: Mon, 10 Apr 2006 03:07:46 -0000 Subject: [Bug 25091] Re: alsa no longer works with Breezy References: <20060113143224.21012.21291.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060410030746.24516.10976.malone@gangotri.ubuntu.com> Closing per submitter's status update that he no longer has affected hardware. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Needs Info => Rejected -- alsa no longer works with Breezy https://launchpad.net/malone/bugs/25091 From admin at ben.io Mon Apr 10 04:57:48 2006 From: admin at ben.io (Benjamin Walter) Date: Mon, 10 Apr 2006 04:57:48 -0000 Subject: [Bug 34552] Re: Neither Breezy nor Dapper sees onboard marvell lan References: <20060312032329.17044.75825.malonedeb@gangotri.ubuntu.com> Message-ID: <20060410045748.32313.94570.malone@gandwana.ubuntu.com> *** This bug is a duplicate of bug 35436 *** can confirm Marvell Yukon 88E8001/8003/8010 PCI Gigabit Ethernet Controller not found by Dapper Flight 6 ** Changed in: Ubuntu Status: Unconfirmed => Confirmed -- Neither Breezy nor Dapper sees onboard marvell lan https://launchpad.net/malone/bugs/34552 From admin at ben.io Mon Apr 10 05:02:19 2006 From: admin at ben.io (Benjamin Walter) Date: Mon, 10 Apr 2006 05:02:19 -0000 Subject: [Bug 35436] Re: Marvell Yukon not detected References: <20060318065353.12186.64301.malonedeb@gandwana.ubuntu.com> Message-ID: <20060410050219.24516.56322.malone@gangotri.ubuntu.com> confirmed, flight 6 - Marvell Yukon 88E8001/8003/8010 PCI Gigabit not detected. ** Changed in: linux-source-2.6.15 base-installer (Ubuntu) Status: Unconfirmed => Confirmed ** Bug 34552 has been marked a duplicate of this bug ** Bug 32061 has been marked a duplicate of this bug -- Marvell Yukon not detected https://launchpad.net/malone/bugs/35436 From admin at ben.io Mon Apr 10 05:04:05 2006 From: admin at ben.io (Benjamin Walter) Date: Mon, 10 Apr 2006 05:04:05 -0000 Subject: [Bug 32061] Re: No Internet connection in DapperFlight4 installation References: <20060220012838.795.99583.malonedeb@gandwana.ubuntu.com> Message-ID: <20060410050406.32233.70429.launchpad@gandwana.ubuntu.com> *** This bug is a duplicate of bug 35436 *** ** This bug has been marked a duplicate of bug 35436 Marvell Yukon not detected -- No Internet connection in DapperFlight4 installation https://launchpad.net/malone/bugs/32061 From admin at ben.io Mon Apr 10 05:03:06 2006 From: admin at ben.io (Benjamin Walter) Date: Mon, 10 Apr 2006 05:03:06 -0000 Subject: [Bug 34552] Re: Neither Breezy nor Dapper sees onboard marvell lan References: <20060312032329.17044.75825.malonedeb@gangotri.ubuntu.com> Message-ID: <20060410050306.24516.67360.launchpad@gangotri.ubuntu.com> *** This bug is a duplicate of bug 35436 *** ** This bug has been marked a duplicate of bug 35436 Marvell Yukon not detected -- Neither Breezy nor Dapper sees onboard marvell lan https://launchpad.net/malone/bugs/34552 From bersace03 at laposte.net Mon Apr 10 05:21:22 2006 From: bersace03 at laposte.net (=?utf-8?q?=C3=89tienne_Bersac?=) Date: Mon, 10 Apr 2006 05:21:22 -0000 Subject: [Bug 35249] acx firmware are not available for the driver References: <20060316214346.6537.84979.malonedeb@gangotri.ubuntu.com> Message-ID: <20060410052122.24486.44860.launchpad@canonical@gangotri.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: Medium Assignee: Ben Collins Status: Unconfirmed Description: Hello, Firmware for acx100/acx111 based wireless network cards are in /lib/firemware/acx/*/. The acx driver complain about non existent firmware because it search for firmware in /lib/firmware only. Currently, user have to get root privileges in order to cp the correct firmware. This is very annoying. If there is no known problems with latest firmware version, we should use those verions. If it do, we should ask Denis Vlasenko to implement a way to choose the version (productid -> firmware table ?). Étienne. Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: Medium Assignee: Ben Collins Status: Unconfirmed Description: Hello, Firmware for acx100/acx111 based wireless network cards are in /lib/firemware/acx/*/. The acx driver complain about non existent firmware because it search for firmware in /lib/firmware only. Currently, user have to get root privileges in order to cp the correct firmware. This is very annoying. If there is no known problems with latest firmware version, we should use those verions. If it do, we should ask Denis Vlasenko to implement a way to choose the version (productid -> firmware table ?). Étienne. -- acx firmware are not available for the driver https://launchpad.net/malone/bugs/35249 From adconrad at 0c3.net Mon Apr 10 05:21:21 2006 From: adconrad at 0c3.net (Adam Conrad) Date: Mon, 10 Apr 2006 05:21:21 -0000 Subject: [Bug 35249] Re: acx firmware are not available for the driver References: <20060316214346.6537.84979.malonedeb@gangotri.ubuntu.com> Message-ID: <20060410052122.24486.40951.malone@gangotri.ubuntu.com> acx firmware selection is done in linux-source, LRM just ships the files. ** Changed in: linux-restricted-modules-2.6.15 linux-restricted-modules-2.6.15-18-386 (Ubuntu) Sourcepackagename: linux-restricted-modules-2.6.15 => linux-source-2.6.15 Binarypackagename: linux-restricted-modules-2.6.15-18-386 => None Assignee: (unassigned) => Ben Collins -- acx firmware are not available for the driver https://launchpad.net/malone/bugs/35249 From homerhomer at gmail.com Mon Apr 10 07:45:05 2006 From: homerhomer at gmail.com (Mike Homer) Date: Mon, 10 Apr 2006 07:45:05 -0000 Subject: [Bug 38752] Re: bcm43xx does not associate unless "iwlist scan" is invoked. References: <20060408153924.32313.6926.malonedeb@gandwana.ubuntu.com> Message-ID: <20060410074505.24486.85332.malone@gangotri.ubuntu.com> I have the same issue with my Compaq v2000 with bcm43xx wireless, \ I have also noticed that waiting for a couple minutes sometimes works too. It's funny, I usually do a iwconfig, and see if my AP MAC address is listed, once it's listed and not stating "Access Point: Invalid" then it will work. lspci | grep Broadcom 0000:05:02.0 Network controller: Broadcom Corporation BCM4306 802.11b/g Wireless LAN Controller (rev 03) modinfo bcm43xx description: Broadcom BCM43xx wireless driver author: Martin Langer author: Stefano Brivio author: Michael Buesch license: GPL vermagic: 2.6.15-20-k7 SMP preempt K7 gcc-4.0 depends: ieee80211softmac,ieee80211 alias: pci:v000014E4d00004301sv*sd*bc*sc*i* alias: pci:v000014E4d00004307sv*sd*bc*sc*i* alias: pci:v000014E4d00004312sv*sd*bc*sc*i* alias: pci:v000014E4d00004318sv*sd*bc*sc*i* alias: pci:v000014E4d00004320sv*sd*bc*sc*i* alias: pci:v000014E4d00004324sv*sd*bc*sc*i* alias: pci:v000014E4d00004325sv*sd*bc*sc*i* srcversion: 4AFA3CCF3C4AE35BB328866 parm: noleds:Turn off all LED activity (int) parm: country:Select LocaleCode 0-11 (For travelers) parm: locale:int parm: long_retry:Long-Retry-Limit (0 - 15) (int) parm: short_retry:Short-Retry-Limit (0 - 15) (int) parm: bad_frames_preempt:enable(1) / disable(0) Bad Frames Preemption (int) parm: pio:enable(1) / disable(0) PIO mode (int) -- bcm43xx does not associate unless "iwlist scan" is invoked. https://launchpad.net/malone/bugs/38752 From tfheen at canonical.com Mon Apr 10 08:17:33 2006 From: tfheen at canonical.com (Tollef Fog Heen) Date: Mon, 10 Apr 2006 08:17:33 -0000 Subject: [Bug 33162] Re: Acer Travel Mate 3210 needs acpi=off References: <20060228154534.17498.22123.malonedeb@gangotri.ubuntu.com> Message-ID: <20060410081733.24516.63821.malone@gangotri.ubuntu.com> Flight 6 has a too old kernel. If you could install dapper and then upgrade to the latest kernel, the acpi=off should no longer be needed. -- Acer Travel Mate 3210 needs acpi=off https://launchpad.net/malone/bugs/33162 From cjwatson at canonical.com Mon Apr 10 09:54:58 2006 From: cjwatson at canonical.com (Colin Watson) Date: Mon, 10 Apr 2006 09:54:58 -0000 Subject: [Bug 35436] Re: Marvell Yukon not detected References: <20060318065353.12186.64301.malonedeb@gandwana.ubuntu.com> Message-ID: <20060410095459.24486.72031.launchpad@gangotri.ubuntu.com> ** Changed in: linux-source-2.6.15 base-installer (Ubuntu) Binarypackagename: base-installer => None -- Marvell Yukon not detected https://launchpad.net/malone/bugs/35436 From chantry.xavier at gmail.com Mon Apr 10 09:58:16 2006 From: chantry.xavier at gmail.com (Xavier) Date: Mon, 10 Apr 2006 09:58:16 -0000 Subject: [Bug 38304] Re: Prism 2.5 firmware load failed References: <20060406002946.32233.83854.malonedeb@gandwana.ubuntu.com> Message-ID: <20060410095816.32233.31474.launchpad@gandwana.ubuntu.com> *** This bug is a duplicate of bug 38278 *** ** This bug has been marked a duplicate of bug 38278 wifi card don't work. isl3886 is required but not installed -- Prism 2.5 firmware load failed https://launchpad.net/malone/bugs/38304 From chantry.xavier at gmail.com Mon Apr 10 09:58:16 2006 From: chantry.xavier at gmail.com (Xavier) Date: Mon, 10 Apr 2006 09:58:16 -0000 Subject: [Bug 38278] Re: wifi card don't work. isl3886 is required but not installed References: <20060405203926.24486.7083.malonedeb@gangotri.ubuntu.com> Message-ID: <20060410095817.32233.46928.launchpad@gandwana.ubuntu.com> ** Bug 38304 has been marked a duplicate of this bug -- wifi card don't work. isl3886 is required but not installed https://launchpad.net/malone/bugs/38278 From mikko.s.saarinen at mbnet.fi Mon Apr 10 10:40:45 2006 From: mikko.s.saarinen at mbnet.fi (Mikko Saarinen) Date: Mon, 10 Apr 2006 10:40:45 -0000 Subject: [Bug 34066] Re: usb mouse dead on resume References: <20060308112717.14318.84205.malonedeb@gangotri.ubuntu.com> Message-ID: <20060410104045.32233.24614.malone@gandwana.ubuntu.com> My usb mouse also dies when resuming from suspend. When I detach the cord and attach it again, mouse starts to work. Haven't observed if it happens with the first suspend or only after the second one. Sleep doesn't currently work at all, so I can't test how my mouse behaves when resumed from sleep. I have an MSI S250 laptop with Dapper Flight 6 -- usb mouse dead on resume https://launchpad.net/malone/bugs/34066 From ivoks at ubuntu.com Mon Apr 10 12:20:50 2006 From: ivoks at ubuntu.com (=?utf-8?q?Ante_Karamati=C4=87?=) Date: Mon, 10 Apr 2006 12:20:50 -0000 Subject: [Bug 38989] Mixed input devices References: <20060410122050.24486.11736.malonedeb@gangotri.ubuntu.com> Message-ID: <20060410122050.24486.11736.malonedeb@gangotri.ubuntu.com> Public bug reported: Affects: linux-meta linux-image-2.6-686 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: linux-image-2.6.15-20-686 bootlog says more than words: Apr 9 10:00:42 localhost kernel: [4294690.769000] input: AlpsPS/2 ALPS GlidePoint as /class/input/input3 Apr 9 10:06:10 localhost kernel: [4294689.064000] input: AlpsPS/2 ALPS GlidePoint as /class/input/input2 Apr 10 09:39:07 localhost kernel: [4294690.558000] input: AlpsPS/2 ALPS GlidePoint as /class/input/input3 Apr 10 13:39:35 localhost kernel: [4294689.423000] input: AlpsPS/2 ALPS GlidePoint as /class/input/input2 Sometimes ALPS is /class/input/input2 (/dev/input/event2), and sometimes it is /class/input/input3 (/dev/input/even3). -- Mixed input devices https://launchpad.net/malone/bugs/38989 From susancragin at earthlink.net Mon Apr 10 12:35:28 2006 From: susancragin at earthlink.net (susancragin) Date: Mon, 10 Apr 2006 12:35:28 -0000 Subject: [Bug 26075] Re: [Bug 26075] Re: HP Pavilion dv1000 laptop wireless button will not enable and disable wireless References: <20060113144745.21012.65346.launchpad@macquarie.warthogs.hbd.com> <20060409004055.32313.35648.malone@gandwana.ubuntu.com> Message-ID: <443A5110.70907@earthlink.net> % echo 1 > /sys/bus/pci/drivers/ipw2200/0000\:02\:06.0/led command does not work with Acer Ferrari 4005. Contents of Driver directory: 000:02:06.0/let: No such file or directory root at ubuntu:/sys/bus/pci/drivers# ls agpgart-amd64 bcm43xx parport_pc shpchp ATI IXP AC97 controller ehci_hcd pcieport-driver tg3 ATIIXP_IDE ohci1394 PCI_IDE yenta_cardbus ATI IXP MC97 controller ohci_hcd serial -- HP Pavilion dv1000 laptop wireless button will not enable and disable wireless https://launchpad.net/malone/bugs/26075 From ben.collins at ubuntu.com Mon Apr 10 13:09:38 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Mon, 10 Apr 2006 13:09:38 -0000 Subject: [Bug 22409] Re: network-admin displays duplicate adapter info, doesn't remember settings References: <20060113141810.21012.406.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060410130938.24516.85695.launchpad@gangotri.ubuntu.com> ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Needs Info => Fix Committed -- network-admin displays duplicate adapter info, doesn't remember settings https://launchpad.net/malone/bugs/22409 From ivoks at ubuntu.com Mon Apr 10 13:05:30 2006 From: ivoks at ubuntu.com (=?utf-8?q?Ante_Karamati=C4=87?=) Date: Mon, 10 Apr 2006 13:05:30 -0000 Subject: [Bug 38989] Re: Mixed input devices References: <20060410122050.24486.11736.malonedeb@gangotri.ubuntu.com> Message-ID: <20060410130530.24486.63731.malone@gangotri.ubuntu.com> Quick and dirty fix would be: SYSFS{dev}=="13:6[0-9]", SUBSYSTEM=="input", KERNEL=="event[0-9]*", SYMLINK+="input/alps-event" In /etc/udev/rules.d/60-symlinks.rules But I'm not sure this is correct for all situations. Works for me :/ -- Mixed input devices https://launchpad.net/malone/bugs/38989 From ben.collins at ubuntu.com Mon Apr 10 13:10:48 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Mon, 10 Apr 2006 13:10:48 -0000 Subject: [Bug 23682] Re: No input from microphone on ALI5451 References: <20060113142504.21012.99258.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060410131048.32313.28398.launchpad@gandwana.ubuntu.com> ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Needs Info => Fix Released -- No input from microphone on ALI5451 https://launchpad.net/malone/bugs/23682 From ben.collins at ubuntu.com Mon Apr 10 13:17:45 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Mon, 10 Apr 2006 13:17:45 -0000 Subject: [Bug 27979] Re: Dapper boot failure from external USB hard drive References: <20060113152011.29386.81523.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060410131745.32233.97001.malone@gandwana.ubuntu.com> Actually, that's quite different. This problem is related to the USB driver not being initialized properly on a cold boot. -- Dapper boot failure from external USB hard drive https://launchpad.net/malone/bugs/27979 From ben.collins at ubuntu.com Mon Apr 10 13:26:46 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Mon, 10 Apr 2006 13:26:46 -0000 Subject: [Bug 33096] Re: "DVICO Fusion HDTV DVB Plus" tv tuner card will not lock on to channel References: <20060227230332.16580.85365.malonedeb@gandwana.ubuntu.com> Message-ID: <20060410132646.32233.13990.malone@gandwana.ubuntu.com> This is sort of crappy though. This change can break or fix other cards. So either way I am breaking something for someone. Is there a better fix for this, maybe in upstream? -- "DVICO Fusion HDTV DVB Plus" tv tuner card will not lock on to channel https://launchpad.net/malone/bugs/33096 From cpinto at yimports.com Mon Apr 10 13:26:23 2006 From: cpinto at yimports.com (Celso Pinto) Date: Mon, 10 Apr 2006 13:26:23 -0000 Subject: [Bug 26075] Re: HP Pavilion dv1000 laptop wireless button will not enable and disable wireless References: <20060113144745.21012.65346.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060410132623.24516.18157.malone@gangotri.ubuntu.com> Susan, had you a dv1000 laptop it'd probably have an ipw2xxx card in it and you should be able to control the led state the way I mentioned. In an Acer Ferrari, with a Broadcomm card, I have no idea. Yet, you can try to run the following command, while being at the /sys/bus/pci/drivers directory: % find . -name '*led*' If it prints anything, it will be the directory and the full name of the file. Before setting the flag to 1, check what flags you driver supports, if any. -- HP Pavilion dv1000 laptop wireless button will not enable and disable wireless https://launchpad.net/malone/bugs/26075 From ben.collins at ubuntu.com Mon Apr 10 13:34:18 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Mon, 10 Apr 2006 13:34:18 -0000 Subject: [Bug 34723] Re: iMac G5 Thermal Fan Support References: <20060313091457.30057.2443.malonedeb@gandwana.ubuntu.com> Message-ID: <20060410133418.24516.2355.malone@gangotri.ubuntu.com> Yes, there is such an option, but it does not support the newer iMac G5's. This is directly from the mouth of the PMac kernel guy (BenH). 2.6.16 supports it, but it requires so much code to be backported (entire i2c layer rewrite) that it is not feasible for dapper). -- iMac G5 Thermal Fan Support https://launchpad.net/malone/bugs/34723 From ben.collins at ubuntu.com Mon Apr 10 13:30:44 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Mon, 10 Apr 2006 13:30:44 -0000 Subject: [Bug 34209] Re: 2.6.15-17-k7 doesn't boot on Athlon 2000+ References: <20060309134308.29403.37559.malonedeb@gangotri.ubuntu.com> Message-ID: <20060410133044.24516.84498.malone@gangotri.ubuntu.com> Please try 2.6.15-20 -- 2.6.15-17-k7 doesn't boot on Athlon 2000+ https://launchpad.net/malone/bugs/34209 From ben.collins at ubuntu.com Mon Apr 10 13:39:39 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Mon, 10 Apr 2006 13:39:39 -0000 Subject: [Bug 35249] Re: acx firmware are not available for the driver References: <20060316214346.6537.84979.malonedeb@gangotri.ubuntu.com> Message-ID: <20060410133939.32313.52967.malone@gandwana.ubuntu.com> ACX firmware is done just like all other firmware. If your firmware is not being found, then you have a problem on your system (old udev, conflicting package like some odd hotplug scripts or some such). If the firmware isn't being found and your system does not conflict with normal load operations, then I can only blame udev. -- acx firmware are not available for the driver https://launchpad.net/malone/bugs/35249 From ben.collins at ubuntu.com Mon Apr 10 13:35:39 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Mon, 10 Apr 2006 13:35:39 -0000 Subject: [Bug 34870] Re: ipw2200 repeatedly crashes. References: <20060314104909.30082.87848.malonedeb@gandwana.ubuntu.com> Message-ID: <20060410133539.32313.213.malone@gandwana.ubuntu.com> For clarity please confirm againt 2.6.15-20. Just saying "latest kernel" has no context. -- ipw2200 repeatedly crashes. https://launchpad.net/malone/bugs/34870 From ben.collins at ubuntu.com Mon Apr 10 13:41:26 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Mon, 10 Apr 2006 13:41:26 -0000 Subject: [Bug 35436] Re: Marvell Yukon not detected References: <20060318065353.12186.64301.malonedeb@gandwana.ubuntu.com> Message-ID: <20060410134126.32233.17330.malone@gandwana.ubuntu.com> sky2 was added to the nic-modules udeb, so things should work in latest installers. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Confirmed => Fix Released -- Marvell Yukon not detected https://launchpad.net/malone/bugs/35436 From dgerard at gmail.com Mon Apr 10 13:40:43 2006 From: dgerard at gmail.com (David Gerard) Date: Mon, 10 Apr 2006 13:40:43 -0000 Subject: [Bug 29971] Re: Ubuntu doesn't detect and install my wireless orinoco_usb chipset References: <20060129095757.9344.91081.malonedeb@gandwana.ubuntu.com> Message-ID: <20060410134043.32233.74285.malone@gandwana.ubuntu.com> I sometimes have to switch it off and on after hibernate or suspend, but usually waiting about thirty seconds is enough. I'm not sure of a user-friendly way to tell people they need to Fn-F2 to get the official Compaq wifi to work. Despite the little wifi logo on the F2 key. OTOH, Windows users of the W200 don't know either. Apart from the overhead of another module to keep track of, the only issue I can see with just including a precompiled orinoco_usb is if that module could cause problems elsewhere in the system if loaded. -- Ubuntu doesn't detect and install my wireless orinoco_usb chipset https://launchpad.net/malone/bugs/29971 From ben.collins at ubuntu.com Mon Apr 10 13:48:13 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Mon, 10 Apr 2006 13:48:13 -0000 Subject: [Bug 35742] Re: Missing support for 945GM chipset References: <20060320171618.8118.14819.malonedeb@gandwana.ubuntu.com> Message-ID: <20060410134813.24516.21445.launchpad@gangotri.ubuntu.com> ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Fix Committed => Fix Released -- Missing support for 945GM chipset https://launchpad.net/malone/bugs/35742 From ben.collins at ubuntu.com Mon Apr 10 13:48:01 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Mon, 10 Apr 2006 13:48:01 -0000 Subject: [Bug 35635] Re: Halts on Boot after Installation References: <20060319201635.12254.13260.malonedeb@gandwana.ubuntu.com> Message-ID: <20060410134802.24516.69915.malone@gangotri.ubuntu.com> This should be fixed in the 2.6.15-20 kernels. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Unconfirmed => Fix Released -- Halts on Boot after Installation https://launchpad.net/malone/bugs/35635 From ben.collins at ubuntu.com Mon Apr 10 13:46:17 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Mon, 10 Apr 2006 13:46:17 -0000 Subject: [Bug 35624] Re: [bcm43xx] Broadcom BCM4306 wireless - unable to connect References: <20060319184821.12254.30538.malonedeb@gandwana.ubuntu.com> Message-ID: <20060410134617.32233.61072.malone@gandwana.ubuntu.com> All of the mentioned bugs related to bcm43xx should be fixed in 2.6.15-20. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Unconfirmed => Fix Released -- [bcm43xx] Broadcom BCM4306 wireless - unable to connect https://launchpad.net/malone/bugs/35624 From manuelsspace-registros at yahoo.com Mon Apr 10 13:49:55 2006 From: manuelsspace-registros at yahoo.com (manuel) Date: Mon, 10 Apr 2006 13:49:55 -0000 Subject: [Bug 33162] Re: [Bug 33162] Re: Acer Travel Mate 3210 needs acpi=off References: <20060228154534.17498.22123.malonedeb@gangotri.ubuntu.com> <20060410081733.24516.63821.malone@gangotri.ubuntu.com> Message-ID: <200604100949.55256.manuelsspace-registros@yahoo.com> El día Monday 10 April 2006 04:17, Tollef Fog Heen escribió: > Flight 6 has a too old kernel. If you could install dapper and then > upgrade to the latest kernel, the acpi=off should no longer be needed. But newbies and peoples which evaluate moving from other OS to Ubuntu will try Live-CD and this will fail without any message. If the boot loader provide Fx-Laptop Compatible this may be avoided. The help screen may explain the reason I'll try 2.6.16.2 from kernel.org. I suppose this is the one you recommend Thanks, Manuel -- Acer Travel Mate 3210 needs acpi=off https://launchpad.net/malone/bugs/33162 From ben.collins at ubuntu.com Mon Apr 10 13:54:29 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Mon, 10 Apr 2006 13:54:29 -0000 Subject: [Bug 35788] Re: panic on boot with 2.6.15-18-amd64-generic References: <20060320224342.22884.40303.malonedeb@gangotri.ubuntu.com> Message-ID: <20060410135429.32233.23443.malone@gandwana.ubuntu.com> So 2.6.15-20-amd64-k8 doesn't work? Note, this is the kernel I am using on my AMD64-3200, with nvidia4 chipset (not using ATI video like you are though). -- panic on boot with 2.6.15-18-amd64-generic https://launchpad.net/malone/bugs/35788 From ben.collins at ubuntu.com Mon Apr 10 14:02:40 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Mon, 10 Apr 2006 14:02:40 -0000 Subject: [Bug 36791] Re: [bcm43xx] Wireless adapter Broadcom 4306 does not activate References: <20060326230519.20514.38613.malonedeb@gangotri.ubuntu.com> Message-ID: <20060410140240.24516.53269.malone@gangotri.ubuntu.com> Yet another "bcm43xx doesn't work because of no firmware" issue. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Unconfirmed => Rejected -- [bcm43xx] Wireless adapter Broadcom 4306 does not activate https://launchpad.net/malone/bugs/36791 From ben.collins at ubuntu.com Mon Apr 10 14:00:29 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Mon, 10 Apr 2006 14:00:29 -0000 Subject: [Bug 33162] Re: Acer Travel Mate 3210 needs acpi=off References: <20060228154534.17498.22123.malonedeb@gangotri.ubuntu.com> Message-ID: <20060410140029.32313.60099.malone@gandwana.ubuntu.com> Flight 6 is not a released CD, it's beta. What he is saying is that this is fixed in a newer kernel in our dist. One which you can probably test using a daily ISO. No one is refering to 2.6.16 at all. -- Acer Travel Mate 3210 needs acpi=off https://launchpad.net/malone/bugs/33162 From ben.collins at ubuntu.com Mon Apr 10 14:05:51 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Mon, 10 Apr 2006 14:05:51 -0000 Subject: [Bug 37308] Re: Missing BCM43xx driver References: <20060330104249.7836.64547.malonedeb@gangotri.ubuntu.com> Message-ID: <20060410140551.24516.63289.malone@gangotri.ubuntu.com> Until broadcom decides to let us distribute firmware with our kernel/driver, this will not happen. About the best we can do is allow users to load firmware manually (USB stick or something), which is currently possible. ** Changed in: linux-source-2.6.15 (Ubuntu) Priority: None => Wontfix Status: Unconfirmed => Rejected -- Missing BCM43xx driver https://launchpad.net/malone/bugs/37308 From ben.collins at ubuntu.com Mon Apr 10 14:07:39 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Mon, 10 Apr 2006 14:07:39 -0000 Subject: [Bug 37434] Re: hotplug trouble with USB CD-ROM References: <20060331051019.5415.66332.malonedeb@gangotri.ubuntu.com> Message-ID: <20060410140739.24516.85152.malone@gangotri.ubuntu.com> This kernel knows that the physical device is missing, but it is not responsible for destroying a mount-point out from under userspace. Something has to unmount it so that it can clean things up. -- hotplug trouble with USB CD-ROM https://launchpad.net/malone/bugs/37434 From ben.collins at ubuntu.com Mon Apr 10 14:14:57 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Mon, 10 Apr 2006 14:14:57 -0000 Subject: [Bug 37695] Re: Kernel 2.6.15-19-amd64-k8 fails to boot References: <20060402082811.5415.84396.malonedeb@gangotri.ubuntu.com> Message-ID: <20060410141457.32313.78036.launchpad@gandwana.ubuntu.com> ** Changed in: linux-source-2.6.15 linux-image-2.6.15-19-amd64-k8 (Ubuntu) Status: Unconfirmed => Fix Released -- Kernel 2.6.15-19-amd64-k8 fails to boot https://launchpad.net/malone/bugs/37695 From ben.collins at ubuntu.com Mon Apr 10 14:14:25 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Mon, 10 Apr 2006 14:14:25 -0000 Subject: [Bug 37659] Re: The IPAQ module does not support WinCE Smart-phones References: <20060402001620.23733.73589.malonedeb@gandwana.ubuntu.com> Message-ID: <20060410141426.32313.66381.malone@gandwana.ubuntu.com> Sounds like at least the kernel side of this is working then. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Unconfirmed => Fix Released -- The IPAQ module does not support WinCE Smart-phones https://launchpad.net/malone/bugs/37659 From ben.collins at ubuntu.com Mon Apr 10 14:19:45 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Mon, 10 Apr 2006 14:19:45 -0000 Subject: [Bug 37876] Re: Kernel does not read DVDs, no automount References: <20060403143410.25863.56627.malonedeb@gangotri.ubuntu.com> Message-ID: <20060410141945.24486.74912.malone@gangotri.ubuntu.com> If it only fails with disks from a specific burn software, then that software is definitely at fault for creating a disk that is incompatible with your drive. It's that simple. Nothing in the kernel choses to read disks in certain ways, it either reads it or it doesn't. It's the drive itself that decides whether the data can be read or not. So this may not be a hardware bug, but it is definitely not something I can overcome in the kernel. -- Kernel does not read DVDs, no automount https://launchpad.net/malone/bugs/37876 From ben.collins at ubuntu.com Mon Apr 10 14:21:34 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Mon, 10 Apr 2006 14:21:34 -0000 Subject: [Bug 37884] Re: Critical temperature reached (255 C) very soon at boot when using i810 References: <20060403152126.23108.73899.malonedeb@gandwana.ubuntu.com> Message-ID: <20060410142134.24486.984.malone@gangotri.ubuntu.com> Ok, so stock DSDT works as it should. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Needs Info => Rejected -- Critical temperature reached (255 C) very soon at boot when using i810 https://launchpad.net/malone/bugs/37884 From menny.evendanan at gmail.com Mon Apr 10 14:23:17 2006 From: menny.evendanan at gmail.com (menny) Date: Mon, 10 Apr 2006 14:23:17 -0000 Subject: [Bug 37308] Re: [Bug 37308] Re: Missing BCM43xx driver References: <20060330104249.7836.64547.malonedeb@gangotri.ubuntu.com> <20060410140551.24516.63289.malone@gangotri.ubuntu.com> Message-ID: <3f5450480604100723n3ab8e03ah67e030cd0e01ed07@mail.gmail.com> Can this happen at installation time? Can you direct me to HOWTOs articles for install-time and post-install loading of firmwares? On 4/10/06, Ben Collins wrote: > > Until broadcom decides to let us distribute firmware with our > kernel/driver, this will not happen. About the best we can do is allow users > to load firmware manually (USB stick or something), which is currently > possible. > > ** Changed in: linux-source-2.6.15 (Ubuntu) > Priority: None => Wontfix > Status: Unconfirmed => Rejected > -- > Missing BCM43xx driver > https://launchpad.net/malone/bugs/37308 > -- Missing BCM43xx driver https://launchpad.net/malone/bugs/37308 From ben.collins at ubuntu.com Mon Apr 10 14:26:34 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Mon, 10 Apr 2006 14:26:34 -0000 Subject: [Bug 38305] Re: after sleep networking doesn't work References: <20060406004637.24516.46963.malonedeb@gangotri.ubuntu.com> Message-ID: <20060410142635.24516.42148.malone@gangotri.ubuntu.com> Please save dmesg after the resume and attach (not paste) it to this bug report. This sounds more like an acpi issue of not reloading drivers, but I want to be sure. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Unconfirmed => Needs Info -- after sleep networking doesn't work https://launchpad.net/malone/bugs/38305 From ben.collins at ubuntu.com Mon Apr 10 14:31:41 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Mon, 10 Apr 2006 14:31:41 -0000 Subject: [Bug 38473] Re: DWL-g650 not configurable References: <20060406190702.24516.69199.malonedeb@gangotri.ubuntu.com> Message-ID: <20060410143142.32233.28861.malone@gandwana.ubuntu.com> Please retest with 2.6.15-20 kernel. -- DWL-g650 not configurable https://launchpad.net/malone/bugs/38473 From susancragin at earthlink.net Mon Apr 10 14:42:07 2006 From: susancragin at earthlink.net (susancragin) Date: Mon, 10 Apr 2006 14:42:07 -0000 Subject: [Bug 26075] Re: HP Pavilion dv1000 laptop wireless button will not enable and disable wireless References: <20060113144745.21012.65346.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060410144207.24516.96132.malone@gangotri.ubuntu.com> Got "no such job" have filed bug 38766 to report no wireless with my hardware config. -- HP Pavilion dv1000 laptop wireless button will not enable and disable wireless https://launchpad.net/malone/bugs/26075 From ben.collins at ubuntu.com Mon Apr 10 14:46:11 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Mon, 10 Apr 2006 14:46:11 -0000 Subject: [Bug 38693] Re: Install failure on ibook References: <20060408080343.24486.99839.malonedeb@gangotri.ubuntu.com> Message-ID: <20060410144611.32313.31965.malone@gandwana.ubuntu.com> Pretty sure this has nothing to do with firewire. Please try booting with earlyprintk=vga, and take a screenshot of anything that comes up (digital photo). Attach to this bug report please. ** Summary changed: - kubuntu install error: 4294675.149000 ohci1394: fw-host0: SelfID recived outside of bus reset sequence + Install failure on ibook ** Summary changed: - Install failure on ibook + Install failure on AMD-XP -- Install failure on AMD-XP https://launchpad.net/malone/bugs/38693 From ben.collins at ubuntu.com Mon Apr 10 14:48:19 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Mon, 10 Apr 2006 14:48:19 -0000 Subject: [Bug 38731] Re: Cannot delete on external FAT USB Drive References: <20060408133124.32313.1153.malonedeb@gandwana.ubuntu.com> Message-ID: <20060410144819.24486.18696.malone@gangotri.ubuntu.com> Could have just been that the proper nls module(s) were not loaded. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Unconfirmed => Rejected -- Cannot delete on external FAT USB Drive https://launchpad.net/malone/bugs/38731 From ben.collins at ubuntu.com Mon Apr 10 14:52:15 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Mon, 10 Apr 2006 14:52:15 -0000 Subject: [Bug 38839] Re: Fails to boot on a centrino laptop References: <20060409091928.32233.9591.malonedeb@gandwana.ubuntu.com> Message-ID: <20060410145215.32233.43688.malone@gandwana.ubuntu.com> Please be sure you are booting something with the latest 2.6.15-20 kernel. Latest daily ISO (live and install) should work. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Unconfirmed => Needs Info -- Fails to boot on a centrino laptop https://launchpad.net/malone/bugs/38839 From ben.collins at ubuntu.com Mon Apr 10 14:59:05 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Mon, 10 Apr 2006 14:59:05 -0000 Subject: [Bug 38989] Re: Mixed input devices References: <20060410122050.24486.11736.malonedeb@gangotri.ubuntu.com> Message-ID: <20060410145905.24486.34827.malone@gangotri.ubuntu.com> This isn't something I can generally fix in the kernel. The order depends on many factors, including module load order, and the order of devices presented by the bus itself. If anything, udev can fix this, but I doubt it. ** Changed in: linux-meta linux-image-2.6-686 (Ubuntu) Sourcepackagename: linux-meta => udev Binarypackagename: linux-image-2.6-686 => None -- Mixed input devices https://launchpad.net/malone/bugs/38989 From ben.collins at ubuntu.com Mon Apr 10 14:56:59 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Mon, 10 Apr 2006 14:56:59 -0000 Subject: [Bug 38913] Re: No temperature reported References: <20060409182217.32313.93275.malonedeb@gandwana.ubuntu.com> Message-ID: <20060410145659.24516.40705.malone@gangotri.ubuntu.com> Please report exactly which kernel you are using (uname -a). Also attach (do not paste) the output of dmesg. ** Changed in: linux-meta linux-386 (Ubuntu) Sourcepackagename: linux-meta => linux-source-2.6.15 Binarypackagename: linux-386 => None -- No temperature reported https://launchpad.net/malone/bugs/38913 From ben.collins at ubuntu.com Mon Apr 10 14:55:53 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Mon, 10 Apr 2006 14:55:53 -0000 Subject: [Bug 38908] Re: kernel panic on boot References: <20060409172100.24516.31977.malonedeb@gangotri.ubuntu.com> Message-ID: <20060410145554.24516.76845.malone@gangotri.ubuntu.com> Surely this is either the initramfs or the installer's fault. ** Changed in: linux-source-2.6.15 (Ubuntu) Sourcepackagename: linux-source-2.6.15 => debian-installer -- kernel panic on boot https://launchpad.net/malone/bugs/38908 From vyruss at freemail.gr Mon Apr 10 15:19:27 2006 From: vyruss at freemail.gr (Jimmy Angelakos) Date: Mon, 10 Apr 2006 15:19:27 -0000 Subject: [Bug 37876] Re: Kernel does not read DVDs, no automount References: <20060403143410.25863.56627.malonedeb@gangotri.ubuntu.com> Message-ID: <20060410151927.24486.98893.malone@gangotri.ubuntu.com> But then why did it work fine in Dapper? -- Kernel does not read DVDs, no automount https://launchpad.net/malone/bugs/37876 From vyruss at freemail.gr Mon Apr 10 15:19:51 2006 From: vyruss at freemail.gr (Jimmy Angelakos) Date: Mon, 10 Apr 2006 15:19:51 -0000 Subject: [Bug 37876] Correction: References: <20060403143410.25863.56627.malonedeb@gangotri.ubuntu.com> Message-ID: <20060410151951.32313.54401.malone@gandwana.ubuntu.com> Correction: not in Dapper, in Breezy -- Kernel does not read DVDs, no automount https://launchpad.net/malone/bugs/37876 From ivoks at ubuntu.com Mon Apr 10 15:34:30 2006 From: ivoks at ubuntu.com (=?utf-8?q?Ante_Karamati=C4=87?=) Date: Mon, 10 Apr 2006 15:34:30 -0000 Subject: [Bug 38989] Re: Mixed input devices References: <20060410122050.24486.11736.malonedeb@gangotri.ubuntu.com> Message-ID: <20060410153430.24516.24679.malone@gangotri.ubuntu.com> FWIW, my solution in the end doesn't work for me :( I'll try to figure out something and post my solution here. -- Mixed input devices https://launchpad.net/malone/bugs/38989 From ben.collins at ubuntu.com Mon Apr 10 15:35:53 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Mon, 10 Apr 2006 15:35:53 -0000 Subject: [Bug 37876] Re: Kernel does not read DVDs, no automount References: <20060403143410.25863.56627.malonedeb@gangotri.ubuntu.com> Message-ID: <20060410153553.24486.35835.malone@gangotri.ubuntu.com> Could have been an issue with DMA being enabled or disabled. If it works in dapper, then I'll just close it. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Unconfirmed => Fix Released -- Kernel does not read DVDs, no automount https://launchpad.net/malone/bugs/37876 From l.bigonville at edpnet.be Mon Apr 10 15:43:31 2006 From: l.bigonville at edpnet.be (Laurent Bigonville) Date: Mon, 10 Apr 2006 15:43:31 -0000 Subject: [Bug 39013] fglrx_agp missing References: <20060410154331.32233.3836.malonedeb@gandwana.ubuntu.com> Message-ID: <20060410154331.32233.3836.malonedeb@gandwana.ubuntu.com> Public bug reported: Affects: linux-meta (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: I have backlisted agpart to use the fglrx internal agp support. In dmesg I get an error "faild to load fglrx_agp" module. This module exists in the ATI proprietary driver, but missing in the linux-restricted-modules package. -- fglrx_agp missing https://launchpad.net/malone/bugs/39013 From mark at hanoverbeacon.org Mon Apr 10 15:47:41 2006 From: mark at hanoverbeacon.org (markginter24) Date: Mon, 10 Apr 2006 15:47:41 -0000 Subject: [Bug 38913] Re: No temperature reported References: <20060409182217.32313.93275.malonedeb@gandwana.ubuntu.com> Message-ID: <20060410154741.24486.25261.malone@gangotri.ubuntu.com> Linux YouthPastor 2.6.15-20-386 #1 PREEMPT Tue Apr 4 17:48:51 UTC 2006 i686 GNU/Linux That is the output from uname -a Thanks! ** Attachment added: "Dmesg attachment for 0 C Temperature Report" http://librarian.launchpad.net/2001854/dmesg -- No temperature reported https://launchpad.net/malone/bugs/38913 From magelance at yahoo.com Mon Apr 10 15:59:04 2006 From: magelance at yahoo.com (PuMpErNiCkEl) Date: Mon, 10 Apr 2006 15:59:04 -0000 Subject: [Bug 35808] Re: [Bug 35808] Re: sound failure, modprobe error in Dapper References: <20060321025303.8118.32594.malonedeb@gandwana.ubuntu.com> <20060408002255.32233.43124.malone@gandwana.ubuntu.com> Message-ID: <20060410155904.10787.qmail@web36114.mail.mud.yahoo.com> Nope, all problems associated with that are gone. --- Matt Zimmerman wrote: > Was there an error while upgrading your kernel? Send the dmesg output from > "sudo modprobe snd"; the rest is just fallout from that failing. > > Is this still happening after upgrading to the latest kernel? > > ** Changed in: linux-source-2.6.15 (Ubuntu) > Status: Unconfirmed => Needs Info > -- > sound failure, modprobe error in Dapper > https://launchpad.net/malone/bugs/35808 > __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com -- sound failure, modprobe error in Dapper https://launchpad.net/malone/bugs/35808 From cpinto at yimports.com Mon Apr 10 16:04:43 2006 From: cpinto at yimports.com (Celso Pinto) Date: Mon, 10 Apr 2006 16:04:43 -0000 Subject: [Bug 38766] Re: [bcm43xx] Wireless not properly detected. References: <20060408175151.24516.78847.malonedeb@gangotri.ubuntu.com> Message-ID: <20060410160443.24486.34432.malone@gangotri.ubuntu.com> A couple of lines on the dmesg output file look rather suspicious: [ 29.868597] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed. [ 29.935748] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed. A web search led me to this page, which contains a workaround for your problem: https://wiki.ubuntu.com/WifiDocs/Driver/Broadcom43xx -- [bcm43xx] Wireless not properly detected. https://launchpad.net/malone/bugs/38766 From scott at ubuntu.com Mon Apr 10 16:15:50 2006 From: scott at ubuntu.com (Scott James Remnant) Date: Mon, 10 Apr 2006 16:15:50 -0000 Subject: [Bug 37434] Re: hotplug trouble with USB CD-ROM References: <20060331051019.5415.66332.malonedeb@gangotri.ubuntu.com> Message-ID: <20060410161551.32233.93840.malone@gandwana.ubuntu.com> I'm assuming the kernel does send a REMOVE uevent to user space though? (Obviously it will when cleaning up sysfs, but it's worth a check). In which case, it'll be hal+pmount doing the unmount. -- hotplug trouble with USB CD-ROM https://launchpad.net/malone/bugs/37434 From pgidz at f2s.com Mon Apr 10 16:15:56 2006 From: pgidz at f2s.com (Paul Guy) Date: Mon, 10 Apr 2006 16:15:56 -0000 Subject: [Bug 20069] Re: ACX Chipset Wireless Problem References: <20060113140510.21012.85038.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060410161556.32313.90159.malone@gandwana.ubuntu.com> I now use ndiswrapper to work my wireless, but yes this fault has been fixed. -- ACX Chipset Wireless Problem https://launchpad.net/malone/bugs/20069 From scott at ubuntu.com Mon Apr 10 16:21:56 2006 From: scott at ubuntu.com (Scott James Remnant) Date: Mon, 10 Apr 2006 16:21:56 -0000 Subject: [Bug 38461] Re: unstable ordering of eth devices References: <20060406182215.24516.22276.malonedeb@gangotri.ubuntu.com> Message-ID: <20060410162156.24486.39709.malone@gangotri.ubuntu.com> This means you have changed your network hardware since you installed Ubuntu. Correct the MAC addresses in your /etc/iftab file to have them named consistently. ** Changed in: udev (Ubuntu) Assignee: (unassigned) => Scott James Remnant Status: Unconfirmed => Rejected -- unstable ordering of eth devices https://launchpad.net/malone/bugs/38461 From ivoks at ubuntu.com Mon Apr 10 16:26:18 2006 From: ivoks at ubuntu.com (=?utf-8?q?Ante_Karamati=C4=87?=) Date: Mon, 10 Apr 2006 16:26:18 -0000 Subject: [Bug 38989] Re: Mixed input devices References: <20060410122050.24486.11736.malonedeb@gangotri.ubuntu.com> Message-ID: <20060410162618.24516.26704.launchpad@gangotri.ubuntu.com> ** Attachment added: "Addition for udev" http://librarian.launchpad.net/2004254/alps_test -- /dev/input/alps-event symlink https://launchpad.net/malone/bugs/38989 From scott at ubuntu.com Mon Apr 10 16:26:08 2006 From: scott at ubuntu.com (Scott James Remnant) Date: Mon, 10 Apr 2006 16:26:08 -0000 Subject: [Bug 35398] Re: bmac ethernet card not autodetected (no MODALIAS in uevent) References: <20060317213039.26236.71408.malonedeb@gangotri.ubuntu.com> Message-ID: <20060410162608.24516.41848.launchpad@gangotri.ubuntu.com> ** Changed in: udev (Ubuntu) Status: Unconfirmed => Confirmed -- bmac ethernet card not autodetected (no MODALIAS in uevent) https://launchpad.net/malone/bugs/35398 From scott at ubuntu.com Mon Apr 10 16:33:11 2006 From: scott at ubuntu.com (Scott James Remnant) Date: Mon, 10 Apr 2006 16:33:11 -0000 Subject: [Bug 38989] Re: Mixed input devices References: <20060410122050.24486.11736.malonedeb@gangotri.ubuntu.com> Message-ID: <20060410163311.24486.44260.malone@gangotri.ubuntu.com> Please provide the output of "udevinfo -a -p /sys/class/input/$DEVICE" There's no reason for udevd to call its own database query program, it has access to all that information natively :-) ** Summary changed: - Mixed input devices + /dev/input/alps-event symlink ** Changed in: udev (Ubuntu) Severity: Normal => Wishlist Priority: None => Medium Assignee: (unassigned) => Scott James Remnant Status: Unconfirmed => Needs Info -- /dev/input/alps-event symlink https://launchpad.net/malone/bugs/38989 From ivoks at ubuntu.com Mon Apr 10 16:49:58 2006 From: ivoks at ubuntu.com (=?utf-8?q?Ante_Karamati=C4=87?=) Date: Mon, 10 Apr 2006 16:49:58 -0000 Subject: [Bug 38989] Re: /dev/input/alps-event symlink References: <20060410122050.24486.11736.malonedeb@gangotri.ubuntu.com> Message-ID: <20060410164958.32233.9991.malone@gandwana.ubuntu.com> I have no problem with marking it wishlist, but this bug results in some loss of functionality. Packages xserver-xorg-input-synaptics is useless with this bug (for Alps touchpads). I don't know udev so good, so I just provided proof of concept. I'm sure you can fix The Right Way :) ** Attachment added: "Requested output" http://librarian.launchpad.net/2004328/output -- /dev/input/alps-event symlink https://launchpad.net/malone/bugs/38989 From scott at ubuntu.com Mon Apr 10 16:48:28 2006 From: scott at ubuntu.com (Scott James Remnant) Date: Mon, 10 Apr 2006 16:48:28 -0000 Subject: [Bug 38688] Re: unable to boot References: <20060408070420.32313.56814.malonedeb@gandwana.ubuntu.com> Message-ID: <20060410164828.32313.74932.malone@gandwana.ubuntu.com> It shouldn't hang indefinitely; wait three minutes and it should fail with "ALERT! Unable to mount root filesystem" At that point, run "ls /dev/sd*" and see what you have present. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Unconfirmed => Needs Info -- unable to boot https://launchpad.net/malone/bugs/38688 From campbell.kc at gmail.com Mon Apr 10 16:47:15 2006 From: campbell.kc at gmail.com (Kevin) Date: Mon, 10 Apr 2006 16:47:15 -0000 Subject: [Bug 38305] Re: after sleep networking doesn't work References: <20060406004637.24516.46963.malonedeb@gangotri.ubuntu.com> Message-ID: <20060410164715.32233.25232.launchpad@gandwana.ubuntu.com> ** Attachment added: "dmesg" http://librarian.launchpad.net/2004330/dmesg.txt -- after sleep networking doesn't work https://launchpad.net/malone/bugs/38305 From ben.collins at ubuntu.com Mon Apr 10 16:50:00 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Mon, 10 Apr 2006 16:50:00 -0000 Subject: [Bug 37434] Re: hotplug trouble with USB CD-ROM References: <20060331051019.5415.66332.malonedeb@gangotri.ubuntu.com> Message-ID: <20060410165000.24516.35797.malone@gangotri.ubuntu.com> I'm assuming that there's no REMOVE event, since it cannot remove the device because it is in-use (mounted, so ref count is > 0). The remove event would come after it is unmounted, and the ref count falls to 0. Sort of a chicken-and-egg scenario. -- hotplug trouble with USB CD-ROM https://launchpad.net/malone/bugs/37434 From ben.collins at ubuntu.com Mon Apr 10 16:48:27 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Mon, 10 Apr 2006 16:48:27 -0000 Subject: [Bug 35808] Re: sound failure, modprobe error in Dapper References: <20060321025303.8118.32594.malonedeb@gandwana.ubuntu.com> Message-ID: <20060410164827.24516.46329.launchpad@gangotri.ubuntu.com> ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Needs Info => Fix Released -- sound failure, modprobe error in Dapper https://launchpad.net/malone/bugs/35808 From mail at carthik.net Mon Apr 10 16:45:42 2006 From: mail at carthik.net (Carthik Sharma) Date: Mon, 10 Apr 2006 16:45:42 -0000 Subject: [Bug 20069] Re: ACX Chipset Wireless Problem References: <20060113140510.21012.85038.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060410164543.24516.90751.malone@gangotri.ubuntu.com> Thank you for replying so soon. Closing this bug. Reporter says this problem no longer exists. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Needs Info => Fix Released -- ACX Chipset Wireless Problem https://launchpad.net/malone/bugs/20069 From ben.collins at ubuntu.com Mon Apr 10 16:54:54 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Mon, 10 Apr 2006 16:54:54 -0000 Subject: [Bug 39013] Re: fglrx_agp missing References: <20060410154331.32233.3836.malonedeb@gandwana.ubuntu.com> Message-ID: <20060410165456.32313.932.launchpad@gandwana.ubuntu.com> ** Changed in: linux-meta (Ubuntu) Sourcepackagename: linux-meta => linux-restricted-modules-2.6.15 -- fglrx_agp missing https://launchpad.net/malone/bugs/39013 From ben.collins at ubuntu.com Mon Apr 10 16:53:42 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Mon, 10 Apr 2006 16:53:42 -0000 Subject: [Bug 38913] Re: No temperature reported References: <20060409182217.32313.93275.malonedeb@gandwana.ubuntu.com> Message-ID: <20060410165342.24516.84606.malone@gangotri.ubuntu.com> [4294671.110000] ACPI: Thermal Zone [THRM] (0 C) This is probably a buggy ACPI BIOS. Can you see if there is an updated BIOS for your system, or perhaps a DSDT to override the in-system one? -- No temperature reported https://launchpad.net/malone/bugs/38913 From dean at deansas.org Mon Apr 10 16:52:00 2006 From: dean at deansas.org (Dean Sas) Date: Mon, 10 Apr 2006 16:52:00 -0000 Subject: [Bug 29971] Re: Ubuntu doesn't detect and install my wireless orinoco_usb chipset References: <20060129095757.9344.91081.malonedeb@gandwana.ubuntu.com> Message-ID: <20060410165200.24516.37164.malone@gangotri.ubuntu.com> It's probably a bit hackish, and I don't know whether there's any precedent for this, but could we switch it off on hibernation/suspend and switch it on on startup? -- Ubuntu doesn't detect and install my wireless orinoco_usb chipset https://launchpad.net/malone/bugs/29971 From ben.collins at ubuntu.com Mon Apr 10 17:03:50 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Mon, 10 Apr 2006 17:03:50 -0000 Subject: [Bug 38897] Re: Missing keyboard References: <20060409155106.24516.37151.malonedeb@gangotri.ubuntu.com> Message-ID: <20060410170351.32233.70360.malone@gandwana.ubuntu.com> Can you save the dmesg from the -686 boot and attach it to this bug report please (do not paste in comment). ** Changed in: linux-source-2.6.15 linux-image-2.6.15-20-686 (Ubuntu) Status: Unconfirmed => Needs Info -- Missing keyboard https://launchpad.net/malone/bugs/38897 From ben.collins at ubuntu.com Mon Apr 10 17:01:00 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Mon, 10 Apr 2006 17:01:00 -0000 Subject: [Bug 32599] Re: kernel's PHP^Wpnp subsystem is broken References: <20060223124419.14968.52544.malonedeb@gangotri.ubuntu.com> Message-ID: <20060410170100.32313.12923.malone@gandwana.ubuntu.com> PNP stuff should be working again, for the kernel at least. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Confirmed => Fix Released -- kernel's PHP^Wpnp subsystem is broken https://launchpad.net/malone/bugs/32599 From ben.collins at ubuntu.com Mon Apr 10 16:59:08 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Mon, 10 Apr 2006 16:59:08 -0000 Subject: [Bug 37405] Re: Kernel panic on powerpc References: <20060330221626.23707.41063.malonedeb@gandwana.ubuntu.com> Message-ID: <20060410165908.24486.18917.malone@gangotri.ubuntu.com> This sounds like an initramfs-tools problem. Run this: sudo update-initramfs -u Then try rebooting. ** Changed in: linux-source-2.6.15 (Ubuntu) Sourcepackagename: linux-source-2.6.15 => initramfs-tools Binarypackagename: linux-source-2.6.15 => None -- Kernel panic on powerpc https://launchpad.net/malone/bugs/37405 From scott at ubuntu.com Mon Apr 10 17:05:15 2006 From: scott at ubuntu.com (Scott James Remnant) Date: Mon, 10 Apr 2006 17:05:15 -0000 Subject: [Bug 38989] Re: /dev/input/alps-event symlink References: <20060410122050.24486.11736.malonedeb@gangotri.ubuntu.com> Message-ID: <20060410170515.24486.3157.malone@gangotri.ubuntu.com> It's wishlist because it's asking for something that's not there yet. I'm surprised that this is useless without it; the synaptics driver should be configured to use /dev/input/mice and detect the appropriate "real" event device just like it does for other touchpads. Does this really not work? If not, please file another bug on synaptics because that damned well should! Please try the following rule: KERNEL=="event[0-9]*", SYSFS{protocol}=="AlpsPS/2", SYMLINK+="input/alps-event" -- /dev/input/alps-event symlink https://launchpad.net/malone/bugs/38989 From scott at ubuntu.com Mon Apr 10 17:06:14 2006 From: scott at ubuntu.com (Scott James Remnant) Date: Mon, 10 Apr 2006 17:06:14 -0000 Subject: [Bug 37434] Re: hotplug trouble with USB CD-ROM References: <20060331051019.5415.66332.malonedeb@gangotri.ubuntu.com> Message-ID: <20060410170614.24516.16126.malone@gangotri.ubuntu.com> Oh, icky. How do we solve this one? :p User-space needs to know the volume has gone before it can unmount it. Kernel doesn't tell user-space the volume has gone because it's mounted. -- hotplug trouble with USB CD-ROM https://launchpad.net/malone/bugs/37434 From mkjclifford at hotmail.com Mon Apr 10 17:05:55 2006 From: mkjclifford at hotmail.com (TheCliftser) Date: Mon, 10 Apr 2006 17:05:55 -0000 Subject: [Bug 38908] Re: kernel panic on boot References: <20060409172100.24516.31977.malonedeb@gangotri.ubuntu.com> Message-ID: <20060410170555.24516.92566.malone@gangotri.ubuntu.com> For ref I have also appended my details to the following forum: http://ubuntuforums.org/showthread.php?p=902958#post902958 -- kernel panic on boot https://launchpad.net/malone/bugs/38908 From raphink at ubuntu.com Mon Apr 10 17:12:53 2006 From: raphink at ubuntu.com (=?utf-8?q?Rapha=C3=ABl_Pinson?=) Date: Mon, 10 Apr 2006 17:12:53 -0000 Subject: [Bug 37405] Re: [Bug 37405] Re: Kernel panic on powerpc References: <20060330221626.23707.41063.malonedeb@gandwana.ubuntu.com> <20060410165908.24486.18917.malone@gangotri.ubuntu.com> Message-ID: <200604101913.05725.raphink@ubuntu.com> Le Lundi 10 Avril 2006 18:59, Ben Collins a écrit : > This sounds like an initramfs-tools problem. > > Run this: > > sudo update-initramfs -u > > Then try rebooting. The new kernel package fixed the problem a few days ago, so it works now anyway :) Thanks for your help Raphaël > > ** Changed in: linux-source-2.6.15 (Ubuntu) > Sourcepackagename: linux-source-2.6.15 => initramfs-tools > Binarypackagename: linux-source-2.6.15 => None -- Raphaël Pinson Ubuntu - Linux for Human Beings http://www.ubuntulinux.org -- Kernel panic on powerpc https://launchpad.net/malone/bugs/37405 From mail at carthik.net Mon Apr 10 17:10:58 2006 From: mail at carthik.net (Carthik Sharma) Date: Mon, 10 Apr 2006 17:10:58 -0000 Subject: [Bug 24017] Re: system freeze during installation on laptop with Radeon IGP 320 References: <20060113142655.21012.92320.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060410171058.32313.62195.malone@gandwana.ubuntu.com> Thank you for reporting this bug. I am closing this bug since there has been no response to a request to test with a newer version of the kernel for over 3 months. If the problem still exists for you, please reopen this bug, providing new information, if any. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Needs Info => Fix Released -- system freeze during installation on laptop with Radeon IGP 320 https://launchpad.net/malone/bugs/24017 From linux at strigen.com Mon Apr 10 17:10:56 2006 From: linux at strigen.com (Tor Harald Thorland) Date: Mon, 10 Apr 2006 17:10:56 -0000 Subject: [Bug 24017] Re: system freeze during installation on laptop with Radeon IGP 320 References: <20060113142655.21012.92320.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060410171056.32313.48488.malone@gandwana.ubuntu.com> I have also this laptop here at home, i will try to install flight 6 on it tomorrow. I'll post the results here. -- system freeze during installation on laptop with Radeon IGP 320 https://launchpad.net/malone/bugs/24017 From mark at hanoverbeacon.org Mon Apr 10 17:23:06 2006 From: mark at hanoverbeacon.org (markginter24) Date: Mon, 10 Apr 2006 17:23:06 -0000 Subject: [Bug 38913] Re: No temperature reported References: <20060409182217.32313.93275.malonedeb@gandwana.ubuntu.com> Message-ID: <20060410172306.24516.69587.malone@gangotri.ubuntu.com> No updates are available - and I haven't found any DSDT's to use as an override. I guess I'll just have to wait. -- No temperature reported https://launchpad.net/malone/bugs/38913 From ivoks at ubuntu.com Mon Apr 10 17:35:04 2006 From: ivoks at ubuntu.com (=?utf-8?q?Ante_Karamati=C4=87?=) Date: Mon, 10 Apr 2006 17:35:04 -0000 Subject: [Bug 38989] Re: /dev/input/alps-event symlink References: <20060410122050.24486.11736.malonedeb@gangotri.ubuntu.com> Message-ID: <20060410173504.32313.29761.malone@gandwana.ubuntu.com> Nope, with /dev/input/mice it doesn't work (it works, but as ImPS/2, not synaptics): (II) Synaptics touchpad driver version 0.14.3 (**) Option "Device" "/dev/input/mice" ... (EE) Alps Touchpad no synaptics touchpad detected and no repeater device (EE) Alps Touchpad Unable to query/initialize Synaptics hardware. (EE) PreInit failed for input device "Alps Touchpad" This rule for udev works! -- /dev/input/alps-event symlink https://launchpad.net/malone/bugs/38989 From ivoks at ubuntu.com Mon Apr 10 17:43:15 2006 From: ivoks at ubuntu.com (=?utf-8?q?Ante_Karamati=C4=87?=) Date: Mon, 10 Apr 2006 17:43:15 -0000 Subject: [Bug 38989] Re: /dev/input/alps-event symlink References: <20060410122050.24486.11736.malonedeb@gangotri.ubuntu.com> Message-ID: <20060410174315.24486.73647.malone@gangotri.ubuntu.com> Urgh! Sorry. My mistake. If protocol is "event", then device must be event too. But if protocol is "auto-dev", then device can be /dev/psaux. So, this was my mistake. Sorry for taking your time. -- /dev/input/alps-event symlink https://launchpad.net/malone/bugs/38989 From ben.collins at ubuntu.com Mon Apr 10 17:49:54 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Mon, 10 Apr 2006 17:49:54 -0000 Subject: [Bug 37765] Re: [bcm43xx] No matter what it simply will not connect. It scan and sees the networks, but it cannot connect. References: <20060402194212.5415.86136.malonedeb@gangotri.ubuntu.com> Message-ID: <20060410174954.24516.34107.malone@gangotri.ubuntu.com> Please test latest 2.6.15-20 kernels. -- [bcm43xx] No matter what it simply will not connect. It scan and sees the networks, but it cannot connect. https://launchpad.net/malone/bugs/37765 From ben.collins at ubuntu.com Mon Apr 10 17:51:20 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Mon, 10 Apr 2006 17:51:20 -0000 Subject: [Bug 37648] Re: Kernel <= 2.6.15-19 + Tecra A4 /w ACPI = No network/pci.. References: <20060401224812.23733.23703.malonedeb@gandwana.ubuntu.com> Message-ID: <20060410175120.32313.44273.malone@gandwana.ubuntu.com> Please attach these directly to the bug report. There's no guarantee that your links will exist for as long as this bug report does :) Also, please try the 2.6.15-20 kernels. -- Kernel <= 2.6.15-19 + Tecra A4 /w ACPI = No network/pci.. https://launchpad.net/malone/bugs/37648 From ben.collins at ubuntu.com Mon Apr 10 17:55:07 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Mon, 10 Apr 2006 17:55:07 -0000 Subject: [Bug 37590] Re: "device" field of uevents still says "/proc/bus/usb" (should say "/dev/bus/usb") References: <20060401131427.5441.7299.malonedeb@gangotri.ubuntu.com> Message-ID: <20060410175507.32313.36156.malone@gandwana.ubuntu.com> The real bug is that /proc/bus/usb is not mounted. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Unconfirmed => Rejected -- "device" field of uevents still says "/proc/bus/usb" (should say "/dev/bus/usb") https://launchpad.net/malone/bugs/37590 From ben.collins at ubuntu.com Mon Apr 10 17:57:55 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Mon, 10 Apr 2006 17:57:55 -0000 Subject: [Bug 37554] Re: USB Printing problem References: <20060401062148.5415.53902.malonedeb@gangotri.ubuntu.com> Message-ID: <20060410175755.24516.38411.malone@gangotri.ubuntu.com> I saw a few days ago where a similar problem was fixed in cups. Moving there since they may be able to better debug this. ** Changed in: linux-source-2.6.15 (Ubuntu) Sourcepackagename: linux-source-2.6.15 => cupsys -- USB Printing problem https://launchpad.net/malone/bugs/37554 From ben.collins at ubuntu.com Mon Apr 10 17:59:53 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Mon, 10 Apr 2006 17:59:53 -0000 Subject: [Bug 37452] Re: fusion mpt sas driver does not find a RAID1 disk during installation(Sun Galaxy X4200 and X4100) References: <20060331083135.5415.666.malonedeb@gangotri.ubuntu.com> Message-ID: <20060410175953.32233.8636.malone@gandwana.ubuntu.com> Not sure what part of the system needs to support hardware level raid. It should not make a difference to the kernel. -- fusion mpt sas driver does not find a RAID1 disk during installation(Sun Galaxy X4200 and X4100) https://launchpad.net/malone/bugs/37452 From ben.collins at ubuntu.com Mon Apr 10 18:00:22 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Mon, 10 Apr 2006 18:00:22 -0000 Subject: [Bug 37452] Re: fusion mpt sas driver does not find a RAID1 disk during installation(Sun Galaxy X4200 and X4100) References: <20060331083135.5415.666.malonedeb@gangotri.ubuntu.com> Message-ID: <20060410180022.24486.10066.malone@gangotri.ubuntu.com> Please attach dmesg for when this fails (entire dmesg, not just the scsi portions). ** Changed in: linux-source-2.6.15 linux-image-2.6.15-19-amd64-generic (Ubuntu) Status: Unconfirmed => Needs Info -- fusion mpt sas driver does not find a RAID1 disk during installation(Sun Galaxy X4200 and X4100) https://launchpad.net/malone/bugs/37452 From ben.collins at ubuntu.com Mon Apr 10 18:04:04 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Mon, 10 Apr 2006 18:04:04 -0000 Subject: [Bug 37405] Re: Kernel panic on powerpc References: <20060330221626.23707.41063.malonedeb@gandwana.ubuntu.com> Message-ID: <20060410180404.32233.94436.launchpad@gandwana.ubuntu.com> ** Changed in: initramfs-tools (Ubuntu) Status: Unconfirmed => Rejected -- Kernel panic on powerpc https://launchpad.net/malone/bugs/37405 From ben.collins at ubuntu.com Mon Apr 10 18:05:22 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Mon, 10 Apr 2006 18:05:22 -0000 Subject: [Bug 37434] Re: hotplug trouble with USB CD-ROM References: <20060331051019.5415.66332.malonedeb@gangotri.ubuntu.com> Message-ID: <20060410180522.32313.11574.malone@gandwana.ubuntu.com> There's very likely some sort of event, though I'm only guessing. Maybe we could get the output of udevmonitor to see? -- hotplug trouble with USB CD-ROM https://launchpad.net/malone/bugs/37434 From jeremy at jeremyh.net Mon Apr 10 18:14:52 2006 From: jeremy at jeremyh.net (jeremyh) Date: Mon, 10 Apr 2006 18:14:52 -0000 Subject: [Bug 33116] Re: powernow-k8 refuses to load References: <20060228031323.27016.20737.malonedeb@gangotri.ubuntu.com> Message-ID: <20060410181452.24486.38043.malone@gangotri.ubuntu.com> jeremy at ubuntu:~$ dmesg | grep powernow [4294689.517000] powernow-k8: Found 1 AMD Athlon 64 / Opteron processors (version 1.50.4) [4294689.521000] powernow-k8: BIOS error - no PSB or ACPI _PSS objects Linux ubuntu 2.6.15-20-k7 #1 SMP PREEMPT Tue Apr 4 19:26:13 UTC 2006 i686 GNU/Linux AMD Athlon64 3000+ -- powernow-k8 refuses to load https://launchpad.net/malone/bugs/33116 From david at allouche.net Mon Apr 10 18:10:27 2006 From: david at allouche.net (David Allouche) Date: Mon, 10 Apr 2006 18:10:27 -0000 Subject: [Bug 38461] Re: unstable ordering of eth devices References: <20060406182215.24516.22276.malonedeb@gangotri.ubuntu.com> Message-ID: <20060410181027.32313.30315.malone@gandwana.ubuntu.com> Right, my laptop mobo's was replaced before the upgrade to Dapper. That explains the stale mac address in iftab. However, in Breezy the incorrect iftab was disregarded and the eth devices were still named consistently and predictably. Not anymore with Dapper. -- unstable ordering of eth devices https://launchpad.net/malone/bugs/38461 From ben.collins at ubuntu.com Mon Apr 10 18:12:25 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Mon, 10 Apr 2006 18:12:25 -0000 Subject: [Bug 38989] Re: /dev/input/alps-event symlink References: <20060410122050.24486.11736.malonedeb@gangotri.ubuntu.com> Message-ID: <20060410181225.32313.7906.malone@gandwana.ubuntu.com> I'm assuming from your last comment that this was a configuration error. ** Changed in: udev (Ubuntu) Status: Needs Info => Rejected -- /dev/input/alps-event symlink https://launchpad.net/malone/bugs/38989 From scott at ubuntu.com Mon Apr 10 18:24:09 2006 From: scott at ubuntu.com (Scott James Remnant) Date: Mon, 10 Apr 2006 18:24:09 -0000 Subject: [Bug 38461] Re: unstable ordering of eth devices References: <20060406182215.24516.22276.malonedeb@gangotri.ubuntu.com> Message-ID: <20060410182409.32313.83251.malone@gandwana.ubuntu.com> Actually that's not true, in Breezy you were just lucky that the modules loaded in the order you expected. Updating of /etc/iftab could be a job for the Upgrade Tool, Michael? -- unstable ordering of eth devices https://launchpad.net/malone/bugs/38461 From scott at ubuntu.com Mon Apr 10 18:21:54 2006 From: scott at ubuntu.com (Scott James Remnant) Date: Mon, 10 Apr 2006 18:21:54 -0000 Subject: [Bug 37434] Re: hotplug trouble with USB CD-ROM References: <20060331051019.5415.66332.malonedeb@gangotri.ubuntu.com> Message-ID: <20060410182154.32233.61944.malone@gandwana.ubuntu.com> Yes, Adam; please pop the install CD into your installed system (it should be mounted automatically), run "sudo udevmonitor -e" and then unplug it This should be a reasonablish simulation of the events Then attach the output of that command; this should tell us whether or not the kernel informs us of the disconnection. -- hotplug trouble with USB CD-ROM https://launchpad.net/malone/bugs/37434 From maswan at acc.umu.se Mon Apr 10 19:38:55 2006 From: maswan at acc.umu.se (Mattias Wadenstein) Date: Mon, 10 Apr 2006 19:38:55 -0000 Subject: [Bug 5844] No alsa sound in dapper flight-2 References: <20051216155851.24631.9277.malonedeb@gangotri.ubuntu.com> Message-ID: <20060410193855.32313.12822.launchpad@canonical@gandwana.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Assignee: Ubuntu Audio Team Status: Needs Info Description: When running dapper flight-2 amd64 on this new Fujitsu-Siemens Esprimo P I don't get any normal sound, only xmms with OSS output works. /etc/init.d/alsa reload gives this output: root at tyfoner:~# /etc/init.d/alsa reload Unloading ALSA sound driver modules: snd-intel8x0 snd-ac97-codec snd-ac97-bus snd-pcm-oss snd-mixer-oss snd-pcm snd-timer snd-page-alloc. Loading ALSA sound driver modules: snd-intel8x0 snd-ac97-codec snd-ac97-bus snd-pcm-oss snd-mixer-oss snd-pcm snd-timer snd-page-alloc * Setting up ALSA... [ ok ] . Output from dmesg after the command above: [ 8111.289992] ACPI: PCI Interrupt 0000:00:02.7[C] -> GSI 18 (level, low) -> IRQ 225[ 8111.792729] codec_ready: codec is not ready [0x340000] [ 8111.792750] ACPI: PCI interrupt for device 0000:00:02.7 disabled [ 8111.792980] Intel ICH: probe of 0000:00:02.7 failed with error -5 lspci claims: 0000:00:02.7 Multimedia audio controller: Silicon Integrated Systems [SiS] Sound Controller (rev a0) System/Preferences/Sound gives me an empty list to choose sound card from. Rythmbox "can't open device". And mpg123: Directory: M/MachinaeSupremacy/ Playing MPEG stream from Hero.mp3 ... MPEG 1.0 layer III, 192 kbit/s, 44100 Hz joint-stereo ALSA lib confmisc.c:672:(snd_func_card_driver) cannot find card '0' ALSA lib conf.c:3493:(_snd_config_evaluate) function snd_func_card_driver returned error: No such device ALSA lib confmisc.c:392:(snd_func_concat) error evaluating strings ALSA lib conf.c:3493:(_snd_config_evaluate) function snd_func_concat returned error: No such device ALSA lib confmisc.c:1072:(snd_func_refer) error evaluating name ALSA lib conf.c:3493:(_snd_config_evaluate) function snd_func_refer returned error: No such device ALSA lib conf.c:3962:(snd_config_expand) Evaluate error: No such device ALSA lib pcm.c:2099:(snd_pcm_open_noupdate) Unknown PCM default ALSA snd_pcm_open error: No such device Can't find a suitable libao driver. (Is device in use?) Anything else I should add, you do you know what the problem is? Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Assignee: Ubuntu Audio Team Status: Needs Info Description: When running dapper flight-2 amd64 on this new Fujitsu-Siemens Esprimo P I don't get any normal sound, only xmms with OSS output works. /etc/init.d/alsa reload gives this output: root at tyfoner:~# /etc/init.d/alsa reload Unloading ALSA sound driver modules: snd-intel8x0 snd-ac97-codec snd-ac97-bus snd-pcm-oss snd-mixer-oss snd-pcm snd-timer snd-page-alloc. Loading ALSA sound driver modules: snd-intel8x0 snd-ac97-codec snd-ac97-bus snd-pcm-oss snd-mixer-oss snd-pcm snd-timer snd-page-alloc * Setting up ALSA... [ ok ] . Output from dmesg after the command above: [ 8111.289992] ACPI: PCI Interrupt 0000:00:02.7[C] -> GSI 18 (level, low) -> IRQ 225[ 8111.792729] codec_ready: codec is not ready [0x340000] [ 8111.792750] ACPI: PCI interrupt for device 0000:00:02.7 disabled [ 8111.792980] Intel ICH: probe of 0000:00:02.7 failed with error -5 lspci claims: 0000:00:02.7 Multimedia audio controller: Silicon Integrated Systems [SiS] Sound Controller (rev a0) System/Preferences/Sound gives me an empty list to choose sound card from. Rythmbox "can't open device". And mpg123: Directory: M/MachinaeSupremacy/ Playing MPEG stream from Hero.mp3 ... MPEG 1.0 layer III, 192 kbit/s, 44100 Hz joint-stereo ALSA lib confmisc.c:672:(snd_func_card_driver) cannot find card '0' ALSA lib conf.c:3493:(_snd_config_evaluate) function snd_func_card_driver returned error: No such device ALSA lib confmisc.c:392:(snd_func_concat) error evaluating strings ALSA lib conf.c:3493:(_snd_config_evaluate) function snd_func_concat returned error: No such device ALSA lib confmisc.c:1072:(snd_func_refer) error evaluating name ALSA lib conf.c:3493:(_snd_config_evaluate) function snd_func_refer returned error: No such device ALSA lib conf.c:3962:(snd_config_expand) Evaluate error: No such device ALSA lib pcm.c:2099:(snd_pcm_open_noupdate) Unknown PCM default ALSA snd_pcm_open error: No such device Can't find a suitable libao driver. (Is device in use?) Anything else I should add, you do you know what the problem is? -- No alsa sound in dapper flight-2 https://launchpad.net/malone/bugs/5844 From ubuntu at curo.dk Mon Apr 10 19:36:39 2006 From: ubuntu at curo.dk (=?utf-8?q?Christoffer_S=C3=B8rensen?=) Date: Mon, 10 Apr 2006 19:36:39 -0000 Subject: [Bug 39034] 2.6.15-20 References: <20060410193639.32233.93891.malonedeb@gandwana.ubuntu.com> Message-ID: <20060410193639.32233.93891.malonedeb@gandwana.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: The released kernel 2.6.15-20.30 makes my ethernet card not work. 2.6.15-19 works fine. lscpi says: 0000:02:08.0 Ethernet controller: Intel Corporation 82801CAM (ICH3) PRO/100 VE (LOM) Ethernet Controller (rev 41) I tried dhclient but it couldn't get an IP address. With 2.6.15-19 there are no such problems. -- 2.6.15-20 https://launchpad.net/malone/bugs/39034 From crimsun at fungus.sh.nu Mon Apr 10 19:38:54 2006 From: crimsun at fungus.sh.nu (Daniel T. Chen) Date: Mon, 10 Apr 2006 19:38:54 -0000 Subject: [Bug 5844] Re: No alsa sound in dapper flight-2 References: <20051216155851.24631.9277.malonedeb@gangotri.ubuntu.com> Message-ID: <20060410193855.32313.31847.malone@gandwana.ubuntu.com> Please append "acpi_irq_pci=7" to the grub command line for the kernel. ** Changed in: alsa-driver (Ubuntu) Sourcepackagename: alsa-driver => linux-source-2.6.15 -- No alsa sound in dapper flight-2 https://launchpad.net/malone/bugs/5844 From ubuntu at curo.dk Mon Apr 10 20:00:08 2006 From: ubuntu at curo.dk (=?utf-8?q?Christoffer_S=C3=B8rensen?=) Date: Mon, 10 Apr 2006 20:00:08 -0000 Subject: [Bug 39034] Re: 2.6.15-20 makes eepro 100 ethernet not working References: <20060410193639.32233.93891.malonedeb@gandwana.ubuntu.com> Message-ID: <20060410200008.32233.86127.launchpad@gandwana.ubuntu.com> ** Summary changed: - 2.6.15-20 + 2.6.15-20 makes eepro 100 ethernet not working -- 2.6.15-20 makes eepro 100 ethernet not working https://launchpad.net/malone/bugs/39034 From ben.collins at ubuntu.com Mon Apr 10 20:46:13 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Mon, 10 Apr 2006 20:46:13 -0000 Subject: [Bug 39034] Re: 2.6.15-20 makes eepro 100 ethernet not working References: <20060410193639.32233.93891.malonedeb@gandwana.ubuntu.com> Message-ID: <20060410204613.32233.60161.malone@gandwana.ubuntu.com> Please attach (do not paste in comment) the output of the dmesg command. -- 2.6.15-20 makes eepro 100 ethernet not working https://launchpad.net/malone/bugs/39034 From kfl at 3dots.de Mon Apr 10 20:51:36 2006 From: kfl at 3dots.de (Kai F. Lahmann) Date: Mon, 10 Apr 2006 20:51:36 -0000 Subject: [Bug 39042] new Version available References: <20060410205136.32233.37155.malonedeb@gandwana.ubuntu.com> Message-ID: <20060410205136.32233.37155.malonedeb@gandwana.ubuntu.com> Public bug reported: Affects: ndiswrapper (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: ndiswrapper 1.13 got released recently and seams to fix problems with Netgear WG111, about which we have several bugs and also fixes other issues. dapper is still as Version 1.8... -- new Version available https://launchpad.net/malone/bugs/39042 From zulcss at gmail.com Mon Apr 10 20:53:35 2006 From: zulcss at gmail.com (ChuckShort) Date: Mon, 10 Apr 2006 20:53:35 -0000 Subject: [Bug 36603] Re: [acx100] doesn't support WPA References: <20060325162646.20484.19579.malonedeb@gangotri.ubuntu.com> Message-ID: <20060410205335.32233.61545.malone@gandwana.ubuntu.com> Not supported by upstream, neither by us. Sorry ** Changed in: linux-meta linux-restricted-modules-2.6-686 (Ubuntu) Status: Unconfirmed => Rejected -- [acx100] doesn't support WPA https://launchpad.net/malone/bugs/36603 From zulcss at gmail.com Mon Apr 10 20:51:35 2006 From: zulcss at gmail.com (ChuckShort) Date: Mon, 10 Apr 2006 20:51:35 -0000 Subject: [Bug 26940] Re: Kernel 2.6.15-7-686 won't boot with root on SATA disk References: <20060113145204.21012.90778.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060410205135.24486.72551.malone@gangotri.ubuntu.com> No response, closing. -- Kernel 2.6.15-7-686 won't boot with root on SATA disk https://launchpad.net/malone/bugs/26940 From ben.collins at ubuntu.com Mon Apr 10 20:57:42 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Mon, 10 Apr 2006 20:57:42 -0000 Subject: [Bug 37324] Re: acpi breaks MPU-401 UART gameport midi on Asus K7S8X References: <20060330122854.5415.26647.malonedeb@gangotri.ubuntu.com> Message-ID: <20060410205742.32313.57342.malone@gandwana.ubuntu.com> Please retest with 2.6.15-20. -- acpi breaks MPU-401 UART gameport midi on Asus K7S8X https://launchpad.net/malone/bugs/37324 From mark.baaijens at gmail.com Mon Apr 10 21:00:16 2006 From: mark.baaijens at gmail.com (markba) Date: Mon, 10 Apr 2006 21:00:16 -0000 Subject: [Bug 38702] Re: sound does not work References: <20060408091302.32233.60251.malonedeb@gandwana.ubuntu.com> Message-ID: <20060410210016.24516.16991.malone@gangotri.ubuntu.com> Same problem for me, working on a Dell 3100: - Dapper Flight 6 - Kernel: 2.6.15-19 ubuntu at ubuntu:~$ lspci 0000:00:1c.0 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 (rev 04) ubuntu at ubuntu:/proc/asound$ cat /proc/asound/cards 0 [Intel ]: HDA-Intel - HDA Intel HDA Intel at 0xdff3c000 irq 169 -- sound does not work https://launchpad.net/malone/bugs/38702 From ben.collins at ubuntu.com Mon Apr 10 21:04:04 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Mon, 10 Apr 2006 21:04:04 -0000 Subject: [Bug 37294] Re: Multithreaded code does not utilize processors on a Centrino Duo References: <20060330084021.6253.68575.malonedeb@gandwana.ubuntu.com> Message-ID: <20060410210405.32313.57608.malone@gandwana.ubuntu.com> First off, you filed this against -386, which is not SMP, so I hope that was a mistake and you meant -686 :) Second off, an application (multithreaded or otherwise) is not guaranteed to utilize more than 1 CPU. It's possible that other processes running are using 1 CPU, while the app is left using the other even for both of it's threads. I haven't reviewed the code, but it's also possible that it just isn't allowing itself to run as expected. Maybe one thread finished even before the other starts. Who knows. I really don't think this is a bug. I believe you just aren't getting the results you expect, even though those results are correct. ** Changed in: linux-source-2.6.15 kernel-image-2.6.15-19-386-di (Ubuntu) Binarypackagename: kernel-image-2.6.15-19-386-di => None Status: Unconfirmed => Needs Info -- Multithreaded code does not utilize processors on a Centrino Duo https://launchpad.net/malone/bugs/37294 From ben.collins at ubuntu.com Mon Apr 10 21:10:02 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Mon, 10 Apr 2006 21:10:02 -0000 Subject: [Bug 37288] Re: Bluetooth not discovered on Dell Inspiron 9400 References: <20060330075201.6253.17494.malonedeb@gandwana.ubuntu.com> Message-ID: <20060410211002.24516.64769.malone@gangotri.ubuntu.com> Are you sure that bluetooth is enabled in the BIOS? What devices are you trying to reach via the bluetooth connection? ** Changed in: linux-source-2.6.15 kernel-image-2.6.15-19-386-di (Ubuntu) Status: Unconfirmed => Needs Info -- Bluetooth not discovered on Dell Inspiron 9400 https://launchpad.net/malone/bugs/37288 From ben.collins at ubuntu.com Mon Apr 10 21:14:44 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Mon, 10 Apr 2006 21:14:44 -0000 Subject: [Bug 36599] Re: Install Hangs on "Hotplug" References: <20060325154214.6253.7673.malonedeb@gandwana.ubuntu.com> Message-ID: <20060410211444.24516.70548.malone@gangotri.ubuntu.com> Can you confirm this against 2.6.15(dapper)? ** Changed in: linux-source-2.6.15 (Ubuntu) Sourcepackagename: linux-source-2.6.15 => linux-source-2.6.12 Priority: None => Wontfix Status: Unconfirmed => Needs Info -- Install Hangs on "Hotplug" https://launchpad.net/malone/bugs/36599 From ben.collins at ubuntu.com Mon Apr 10 21:15:54 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Mon, 10 Apr 2006 21:15:54 -0000 Subject: [Bug 37240] Re: oracle clusterfs ocfs2 module is missing in 2.6.15 References: <20060329222255.6279.22064.malonedeb@gandwana.ubuntu.com> Message-ID: <20060410211554.24486.48101.launchpad@gangotri.ubuntu.com> ** Changed in: linux-source-2.6.15 kernel-image-2.6.15-19-386-di (Ubuntu) Binarypackagename: kernel-image-2.6.15-19-386-di => None Status: Unconfirmed => Rejected -- oracle clusterfs ocfs2 module is missing in 2.6.15 https://launchpad.net/malone/bugs/37240 From thomas.beckett at gmail.com Mon Apr 10 21:15:34 2006 From: thomas.beckett at gmail.com (Thomas Beckett) Date: Mon, 10 Apr 2006 21:15:34 -0000 Subject: [Bug 6550] Re: Grub wont uncompress kernel image References: <20060108150918.15433.4157.malonedeb@gangotri.ubuntu.com> Message-ID: <20060410211534.24486.25892.malone@gangotri.ubuntu.com> *** This bug is a duplicate of bug 33939 *** I tried the daily (10th April) and all is fixed. I guess it must have been the EDD. Many thanks -- Grub wont uncompress kernel image https://launchpad.net/malone/bugs/6550 From patrick at seher-it.at Mon Apr 10 21:16:08 2006 From: patrick at seher-it.at (Patrick Seher) Date: Mon, 10 Apr 2006 21:16:08 -0000 Subject: [Bug 5844] Re: No alsa sound in dapper flight-2 References: <20051216155851.24631.9277.malonedeb@gangotri.ubuntu.com> Message-ID: <20060410211608.32313.8518.malone@gandwana.ubuntu.com> i tried it (added acpi_... after the nosplash option) but without any change.. still no sound and the same syslog messages. And i tried to boot the system with the old breezy live-cd -> no sound, the same as in hoary und dapper. -- No alsa sound in dapper flight-2 https://launchpad.net/malone/bugs/5844 From henning.schroeder at gmail.com Mon Apr 10 21:22:14 2006 From: henning.schroeder at gmail.com (Henning) Date: Mon, 10 Apr 2006 21:22:14 -0000 Subject: [Bug 33116] Re: powernow-k8 refuses to load References: <20060228031323.27016.20737.malonedeb@gangotri.ubuntu.com> Message-ID: <20060410212214.24516.70264.malone@gangotri.ubuntu.com> Unfortunately it is not fixed for me with linux-image-2.6.15-20-k7: [4294705.557000] powernow-k8: Found 1 AMD Athlon 64 / Opteron processors (version 1.50.4) [4294705.557000] ACPI-0517: *** Error: Method parse/execution failed [\_PR_.CPU0._PSS] (Node ddfd3c20), AE_AML_PACKAGE_LIMIT [4294705.563000] powernow-k8: BIOS error: numpst must be 1 [4294705.587000] ACPI-0517: *** Error: Method parse/execution failed [\_PR_.CPU0._PSS] (Node ddfd3c20), AE_AML_PACKAGE_LIMIT [ -- powernow-k8 refuses to load https://launchpad.net/malone/bugs/33116 From ben.collins at ubuntu.com Mon Apr 10 21:25:28 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Mon, 10 Apr 2006 21:25:28 -0000 Subject: [Bug 37163] Re: EFI-support in kernel causes I/O errors with iPods References: <20060329132453.6279.44854.malonedeb@gandwana.ubuntu.com> Message-ID: <20060410212528.24486.36026.malone@gangotri.ubuntu.com> Have you tried to locate this patch and compile it with EFI enabled to see if it works as expected? ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Unconfirmed => Needs Info -- EFI-support in kernel causes I/O errors with iPods https://launchpad.net/malone/bugs/37163 From ben.collins at ubuntu.com Mon Apr 10 21:28:24 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Mon, 10 Apr 2006 21:28:24 -0000 Subject: [Bug 37145] Re: UniChrome Pro IGP not shown in lspci; X doesn't work References: <20060329110215.6279.44293.malonedeb@gandwana.ubuntu.com> Message-ID: <20060410212824.32313.40353.malone@gandwana.ubuntu.com> See if you can revert to default settings in your BIOS. Also try pci=noacpi to see if that helps. ** Changed in: linux-source-2.6.15 kernel-image-2.6.15-19-386-di (Ubuntu) Binarypackagename: kernel-image-2.6.15-19-386-di => None Status: Unconfirmed => Needs Info -- UniChrome Pro IGP not shown in lspci; X doesn't work https://launchpad.net/malone/bugs/37145 From ben.collins at ubuntu.com Mon Apr 10 21:34:49 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Mon, 10 Apr 2006 21:34:49 -0000 Subject: [Bug 37120] Re: wpasupplicant doesn't work properly with rt2500 driver References: <20060329054652.7313.48354.malonedeb@gangotri.ubuntu.com> Message-ID: <20060410213450.32313.36596.malone@gandwana.ubuntu.com> The issue to me seems to be that wpasupplicant left rt2500 behind. If it worked in breezy, then it should continue to work in dapper. Considering that the regression occured because of wpasupplicant upgrade losing support for rt2500, then I think the blame lies there. ** Changed in: linux-source-2.6.15 (Ubuntu) Sourcepackagename: linux-source-2.6.15 => wpasupplicant -- wpasupplicant doesn't work properly with rt2500 driver https://launchpad.net/malone/bugs/37120 From ben.collins at ubuntu.com Mon Apr 10 21:36:35 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Mon, 10 Apr 2006 21:36:35 -0000 Subject: [Bug 36947] Re: linux-image-2.6.15-19-powerpc64-smp unable to print to USB printer Lexmark E270 References: <20060328030528.20514.75682.malonedeb@gangotri.ubuntu.com> Message-ID: <20060410213635.24516.51605.malone@gangotri.ubuntu.com> The issue seems to be that the ioctl's used for the printer device are not translated between 32-bit userspace and 64-bit kernel. Not sure if this will get fixed. -- linux-image-2.6.15-19-powerpc64-smp unable to print to USB printer Lexmark E270 https://launchpad.net/malone/bugs/36947 From laurent.perrin at gmail.com Mon Apr 10 21:35:43 2006 From: laurent.perrin at gmail.com (taloche) Date: Mon, 10 Apr 2006 21:35:43 -0000 Subject: [Bug 35788] Re: panic on boot with 2.6.15-18-amd64-generic References: <20060320224342.22884.40303.malonedeb@gangotri.ubuntu.com> Message-ID: <20060410213543.24486.39900.malone@gangotri.ubuntu.com> Yeah, I've just tried again after coming back from work and I still have the same issue with 2.6.15-20, -generic and -k8. Just to be sure, I tried to plug my old nvidia card, with no luck. I have searched on the internet for similar problems, and it seems to be quite rare. With nosmp and acpi=off on the command line, everything works perfectly, though. -- panic on boot with 2.6.15-18-amd64-generic https://launchpad.net/malone/bugs/35788 From ben.collins at ubuntu.com Mon Apr 10 21:43:10 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Mon, 10 Apr 2006 21:43:10 -0000 Subject: [Bug 36829] Re: Not work the LAN References: <20060327095832.20514.35552.malonedeb@gangotri.ubuntu.com> Message-ID: <20060410214310.32233.71308.malone@gandwana.ubuntu.com> Breezy or dapper? -- Not work the LAN https://launchpad.net/malone/bugs/36829 From ben.collins at ubuntu.com Mon Apr 10 21:43:34 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Mon, 10 Apr 2006 21:43:34 -0000 Subject: [Bug 36622] Re: No sound on iBook 2 rev. 2 References: <20060325192126.20484.96645.malonedeb@gangotri.ubuntu.com> Message-ID: <20060410214334.32313.72055.malone@gandwana.ubuntu.com> Please try 2.6.15-20 ** Changed in: linux-source-2.6.15 linux-image-2.6.15-19-powerpc (Ubuntu) Status: Unconfirmed => Needs Info -- No sound on iBook 2 rev. 2 https://launchpad.net/malone/bugs/36622 From andrew+ubuntu at jorgensenfamily.us Mon Apr 10 21:46:50 2006 From: andrew+ubuntu at jorgensenfamily.us (Andrew Jorgensen) Date: Mon, 10 Apr 2006 21:46:50 -0000 Subject: [Bug 37120] Re: wpasupplicant doesn't work properly with rt2500 driver References: <20060329054652.7313.48354.malonedeb@gangotri.ubuntu.com> Message-ID: <20060410214650.32233.64769.malone@gandwana.ubuntu.com> I'm sorry, Ben, we should have been more clear. It's not wpasupplicant that left rt2500 behind it's network-manager (by requiring wpasupplicant). -- wpasupplicant doesn't work properly with rt2500 driver https://launchpad.net/malone/bugs/37120 From ben.collins at ubuntu.com Mon Apr 10 21:46:05 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Mon, 10 Apr 2006 21:46:05 -0000 Subject: [Bug 36583] Re: USB mouse causes boot hang on ASUS A6Km (AMD64) References: <20060325132146.20484.40329.malonedeb@gangotri.ubuntu.com> Message-ID: <20060410214605.32233.37558.malone@gandwana.ubuntu.com> Is there a chance there is an updated BIOS for your system, or possibly a DSDT replacement? -- USB mouse causes boot hang on ASUS A6Km (AMD64) https://launchpad.net/malone/bugs/36583 From ben.collins at ubuntu.com Mon Apr 10 21:47:27 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Mon, 10 Apr 2006 21:47:27 -0000 Subject: [Bug 36487] Re: kernel compile fails with zd1211 errors References: <20060324210845.6253.76477.malonedeb@gandwana.ubuntu.com> Message-ID: <20060410214727.32313.78336.malone@gandwana.ubuntu.com> Install the linux-devel package, as it will make sure you have all the correct depencies installed (or do apt-get builddep). ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Unconfirmed => Fix Released -- kernel compile fails with zd1211 errors https://launchpad.net/malone/bugs/36487 From giupenni78 at gmail.com Mon Apr 10 21:59:03 2006 From: giupenni78 at gmail.com (PeppeP) Date: Mon, 10 Apr 2006 21:59:03 -0000 Subject: [Bug 36829] Re: Not work the LAN References: <20060327095832.20514.35552.malonedeb@gangotri.ubuntu.com> Message-ID: <20060410215903.24486.21470.malone@gangotri.ubuntu.com> Dapper ... but with last snapshot that I have downloaded this problem is fixed. Regards, gp -- Not work the LAN https://launchpad.net/malone/bugs/36829 From ben.collins at ubuntu.com Mon Apr 10 22:02:09 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Mon, 10 Apr 2006 22:02:09 -0000 Subject: [Bug 37120] Re: wpasupplicant doesn't work properly with rt2500 driver References: <20060329054652.7313.48354.malonedeb@gangotri.ubuntu.com> Message-ID: <20060410220209.32233.81205.malone@gandwana.ubuntu.com> Sorry about that. ** Changed in: wpasupplicant (Ubuntu) Sourcepackagename: wpasupplicant => network-manager -- wpasupplicant doesn't work properly with rt2500 driver https://launchpad.net/malone/bugs/37120 From ben.collins at ubuntu.com Mon Apr 10 22:03:53 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Mon, 10 Apr 2006 22:03:53 -0000 Subject: [Bug 36402] Re: suspend on sharp PC-MW70J with 2.6.15-19 linux image version References: <20060324105822.5352.46968.malonedeb@gangotri.ubuntu.com> Message-ID: <20060410220354.32233.97646.malone@gandwana.ubuntu.com> How about with 2.6.15-20? ** Changed in: linux-source-2.6.15 linux-image-2.6.15-19-386 (Ubuntu) Status: Unconfirmed => Needs Info -- suspend on sharp PC-MW70J with 2.6.15-19 linux image version https://launchpad.net/malone/bugs/36402 From crimsun at fungus.sh.nu Mon Apr 10 22:03:57 2006 From: crimsun at fungus.sh.nu (Daniel T. Chen) Date: Mon, 10 Apr 2006 22:03:57 -0000 Subject: [Bug 5844] Re: No alsa sound in dapper flight-2 References: <20051216155851.24631.9277.malonedeb@gangotri.ubuntu.com> Message-ID: <20060410220358.24486.56755.malone@gangotri.ubuntu.com> Merging pci/intel8x0.c r1.234. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Needs Info => In Progress -- No alsa sound in dapper flight-2 https://launchpad.net/malone/bugs/5844 From pesterhazy at gmx.net Mon Apr 10 22:03:20 2006 From: pesterhazy at gmx.net (Paulus Esterhazy) Date: Mon, 10 Apr 2006 22:03:20 -0000 Subject: [Bug 38278] Re: wifi card don't work. isl3886 is required but not installed References: <20060405203926.24486.7083.malonedeb@gangotri.ubuntu.com> Message-ID: <20060410220320.32233.79394.malone@gandwana.ubuntu.com> I can confirm this - as of dapper today, my prism54 card didn't work anymore. Work-around 1: sudo rmmod islsm_pci sudo modprobe prism54 Work-around 2: Add "blacklist islsm_pci" to /etc/modprobe.d/blacklist It would be great if the change could be reverted. Note: Stragely this message is shown: islusb: Request firmware for 'isl3886' failed: -2 I do not have any usb networking device. ** Attachment added: "dmesg output" http://librarian.launchpad.net/2024882/bla -- wifi card don't work. isl3886 is required but not installed https://launchpad.net/malone/bugs/38278 From ben.collins at ubuntu.com Mon Apr 10 22:11:22 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Mon, 10 Apr 2006 22:11:22 -0000 Subject: [Bug 36829] Re: Not work the LAN References: <20060327095832.20514.35552.malonedeb@gangotri.ubuntu.com> Message-ID: <20060410221123.24486.13293.malone@gangotri.ubuntu.com> Thanks. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Unconfirmed => Fix Released -- Not work the LAN https://launchpad.net/malone/bugs/36829 From ben.collins at ubuntu.com Mon Apr 10 22:10:52 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Mon, 10 Apr 2006 22:10:52 -0000 Subject: [Bug 33116] Re: powernow-k8 refuses to load References: <20060228031323.27016.20737.malonedeb@gangotri.ubuntu.com> Message-ID: <20060410221052.32313.8439.malone@gandwana.ubuntu.com> Looks like a totally different bug. Your issue seems to be a BIOS bug. Something I cannot fix. -- powernow-k8 refuses to load https://launchpad.net/malone/bugs/33116 From dennis at kaarsemaker.net Mon Apr 10 22:15:52 2006 From: dennis at kaarsemaker.net (Dennis Kaarsemaker) Date: Mon, 10 Apr 2006 22:15:52 -0000 Subject: [Bug 39042] Re: [Bug 39042] new Version available References: <20060410205136.32233.37155.malonedeb@gandwana.ubuntu.com> Message-ID: <1144707352.19602.37.camel@mirage> That is because dapper is in upstreamversionfreeze. subscribe ben.collins at ubuntu.com Ben, do you have plans to do an ndiswrapper update? Couldn't find anything in a quick search through the bugmail. -- new Version available https://launchpad.net/malone/bugs/39042 From toms at pinglebo.net Mon Apr 10 22:22:41 2006 From: toms at pinglebo.net (Tom Simonsen) Date: Mon, 10 Apr 2006 22:22:41 -0000 Subject: [Bug 6550] Re: Grub wont uncompress kernel image References: <20060108150918.15433.4157.malonedeb@gangotri.ubuntu.com> Message-ID: <20060410222241.32313.82309.malone@gandwana.ubuntu.com> *** This bug is a duplicate of bug 33939 *** I have exactly the same problem (I have a nForce 1 mobo). Is there any easy way to solve this now that I have installed ? Or do I have to bite the bullet, install 05.10 and upgrade to dapper ? -- Grub wont uncompress kernel image https://launchpad.net/malone/bugs/6550 From giupenni78 at gmail.com Mon Apr 10 22:27:59 2006 From: giupenni78 at gmail.com (PeppeP) Date: Mon, 10 Apr 2006 22:27:59 -0000 Subject: [Bug 36829] Re: Not work the LAN References: <20060327095832.20514.35552.malonedeb@gangotri.ubuntu.com> Message-ID: <20060410222759.32233.64513.malone@gandwana.ubuntu.com> Sorry, but my last snapshot is of the March 20 and kernel is 2.6.15-19-386. I wll try the last kernel tomorrow. Regards, gp -- Not work the LAN https://launchpad.net/malone/bugs/36829 From giupenni78 at gmail.com Mon Apr 10 22:29:58 2006 From: giupenni78 at gmail.com (PeppeP) Date: Mon, 10 Apr 2006 22:29:58 -0000 Subject: [Bug 36829] Re: Not work the LAN References: <20060327095832.20514.35552.malonedeb@gangotri.ubuntu.com> Message-ID: <20060410222958.32313.46949.malone@gandwana.ubuntu.com> Sorry, but my last snapshot is of the March 20 and kernel is 2.6.15-19-386. I wll try the last kernel tomorrow. Regards, gp -- Not work the LAN https://launchpad.net/malone/bugs/36829 From kiko at async.com.br Mon Apr 10 22:30:24 2006 From: kiko at async.com.br (Christian Reis) Date: Mon, 10 Apr 2006 22:30:24 -0000 Subject: [Bug 29767] Re: IBM Thinkpad X41 suspend to disk unsatisfactory regression References: <20060126124346.26274.53643.malonedeb@gangotri.ubuntu.com> Message-ID: <20060410223025.32233.76064.malone@gandwana.ubuntu.com> Fn-F12 no longer does anything for me on this laptop (as of a dist-upgrade to T-5 minutes). Fn-F4 does suspend to ram successfully. Should I try and trigger this manually? -- IBM Thinkpad X41 suspend to disk unsatisfactory regression https://launchpad.net/malone/bugs/29767 From crimsun at fungus.sh.nu Mon Apr 10 23:02:57 2006 From: crimsun at fungus.sh.nu (Daniel T. Chen) Date: Mon, 10 Apr 2006 23:02:57 -0000 Subject: [Bug 5844] Re: SIS7012 chipset produces no sound in Dapper Flight 2 with intel8x0 ALSA driver due to codec timeouts References: <20051216155851.24631.9277.malonedeb@gangotri.ubuntu.com> Message-ID: <20060410230257.24486.72556.malone@gangotri.ubuntu.com> The above git patch incorrectly attributes the cvs revision as r1.233. The correct revision is r1.234 as noted here [0]. [0] http://cvs.sourceforge.net/viewcvs.py/alsa/alsa-kernel/pci/intel8x0.c?r1=1.233&r2=1.234&diff_format=u -- SIS7012 chipset produces no sound in Dapper Flight 2 with intel8x0 ALSA driver due to codec timeouts https://launchpad.net/malone/bugs/5844 From crimsun at fungus.sh.nu Mon Apr 10 22:57:42 2006 From: crimsun at fungus.sh.nu (Daniel T. Chen) Date: Mon, 10 Apr 2006 22:57:42 -0000 Subject: [Bug 5844] Re: No alsa sound in dapper flight-2 References: <20051216155851.24631.9277.malonedeb@gangotri.ubuntu.com> Message-ID: <20060410225742.32313.73746.malone@gandwana.ubuntu.com> https://lists.ubuntu.com/archives/kernel-team/2006-April/000811.html ** Changed in: linux-source-2.6.15 (Ubuntu) Status: In Progress => Fix Committed ** Summary changed: - No alsa sound in dapper flight-2 + SIS7012 chipset produces no sound in Dapper Flight 2 with intel8x0 ALSA driver due to codec timeouts -- SIS7012 chipset produces no sound in Dapper Flight 2 with intel8x0 ALSA driver due to codec timeouts https://launchpad.net/malone/bugs/5844 From ubuntu at paul.sladen.org Mon Apr 10 23:09:34 2006 From: ubuntu at paul.sladen.org (Paul Sladen) Date: Mon, 10 Apr 2006 23:09:34 -0000 Subject: [Bug 29767] Re: IBM Thinkpad X41 suspend to disk unsatisfactory regression References: <20060126124346.26274.53643.malonedeb@gangotri.ubuntu.com> Message-ID: <20060410230934.32313.37839.malone@gandwana.ubuntu.com> Can you: sudo tail -0f /var/log/acpid while pressing Fn-F12 and also paste the output of: cat /proc/acpi/ibm/hotkey then if you're seeing the event, check that it is making it as far as HAL with: lshal -m and if it's getting that far, this is maybe a gnome-power-manager issue. -- IBM Thinkpad X41 suspend to disk unsatisfactory regression https://launchpad.net/malone/bugs/29767 From gustavo at niemeyer.net Mon Apr 10 23:22:02 2006 From: gustavo at niemeyer.net (Gustavo Niemeyer) Date: Mon, 10 Apr 2006 23:22:02 -0000 Subject: [Bug 35215] Re: ipw3945 driver required for functionality on new Intel PRO/Wireless 3945ABG Mini-PCI Express Adapters References: <20060316173707.11105.89035.malonedeb@gandwana.ubuntu.com> Message-ID: <20060410232202.32233.2442.malone@gandwana.ubuntu.com> Is there a position regarding support for these drivers? It'd be nice to have at least the needed dependencies in Dapper, like an updated ieee80211-source, if support for the whole thing isn't possible. -- ipw3945 driver required for functionality on new Intel PRO/Wireless 3945ABG Mini-PCI Express Adapters https://launchpad.net/malone/bugs/35215 From gustavo at niemeyer.net Mon Apr 10 23:29:34 2006 From: gustavo at niemeyer.net (Gustavo Niemeyer) Date: Mon, 10 Apr 2006 23:29:34 -0000 Subject: [Bug 35215] Re: ipw3945 driver required for functionality on new Intel PRO/Wireless 3945ABG Mini-PCI Express Adapters References: <20060316173707.11105.89035.malonedeb@gandwana.ubuntu.com> Message-ID: <20060410232934.32233.47437.malone@gandwana.ubuntu.com> (and the rest of ieee80211, of course) -- ipw3945 driver required for functionality on new Intel PRO/Wireless 3945ABG Mini-PCI Express Adapters https://launchpad.net/malone/bugs/35215 From bgatchell at verizon.net Mon Apr 10 23:32:10 2006 From: bgatchell at verizon.net (WILLIAM) Date: Mon, 10 Apr 2006 23:32:10 -0000 Subject: [Bug 36599] RE: [Bug 36599] Re: Install Hangs on "Hotplug" References: <20060325154214.6253.7673.malonedeb@gandwana.ubuntu.com> <20060410211444.24516.70548.malone@gangotri.ubuntu.com> Message-ID: <20060410233220.81AD4B680F3@fiordland.ubuntu.com> Sorry, I don't know what you want me to do? I have always used Windows OS. I heard Linux was an easy to use OS, When I seen an article where you could get free CD's to try it out, I sent for them. I really would like to switch to a different OS. I have the "md5summer" program loaded on my Windows XP system. I know how to use it on an ISO file, but I do not know how to use it to run the program on a CD. I downloaded FEDORA on one of my computers and it works real well, and I like it. But, I have heard so much about Ubuntu, I would like to load it on one of my other computers, but it will not let me install it, it hangs on all my computers at "Hotplug". Can you give me a little more detail on what you want me to do? I cannot find a program to run on the CD except installs? -----Original Message----- From: bounces at canonical.com [mailto:bounces at canonical.com] On Behalf Of Ben Collins Sent: Monday, April 10, 2006 4:15 PM To: bgatchell at verizon.net Subject: [Bug 36599] Re: Install Hangs on "Hotplug" Can you confirm this against 2.6.15(dapper)? ** Changed in: linux-source-2.6.15 (Ubuntu) Sourcepackagename: linux-source-2.6.15 => linux-source-2.6.12 Priority: None => Wontfix Status: Unconfirmed => Needs Info -- Install Hangs on "Hotplug" https://launchpad.net/malone/bugs/36599 -- Install Hangs on "Hotplug" https://launchpad.net/malone/bugs/36599 From ubuntu at paul.sladen.org Mon Apr 10 23:31:23 2006 From: ubuntu at paul.sladen.org (Paul Sladen) Date: Mon, 10 Apr 2006 23:31:23 -0000 Subject: [Bug 35742] Re: Missing support for 945GM chipset References: <20060320171618.8118.14819.malonedeb@gandwana.ubuntu.com> Message-ID: <20060410233123.32313.29167.malone@gandwana.ubuntu.com> Yes Carl, please file a new bug for any resolution issues. -- Missing support for 945GM chipset https://launchpad.net/malone/bugs/35742 From ubuntu-bugs at nullinfinity.org Tue Apr 11 00:27:44 2006 From: ubuntu-bugs at nullinfinity.org (Johan Brannlund) Date: Tue, 11 Apr 2006 00:27:44 -0000 Subject: [Bug 34039] Re: bcm43xx module is highly unstable References: <20060308023058.26210.62368.malonedeb@gangotri.ubuntu.com> Message-ID: <20060411002744.32233.70994.malone@gandwana.ubuntu.com> I tried the debugging procedure with kernel 2.6.15-20-amd64-k8, but nothing at all happened. I switched to a text console, did "ifdown eth1" and the system hard locked, as usual. Then, just to be perfectly clear, the SysRq key is actually Fn-Delete on my laptop, so I pressed Fn-Delete, held that down, held down Alt, and then pressed "1" and released all keys. Then I did the same thing again, but with "t" instead of "1". There was no reaction at all. One thing I noticed that I didn't see before was quite a few messages like Apr 10 17:10:02 localhost kernel: [ 88.053174] bcm43xx: FATAL ERROR: BCM43xx_IRQ_XMIT_ERROR in kern.log. Also, the system does not hardlock when I simply do "ifconfig eth1 down", so I think it's something that dhclient does when releasing the dhcp lease that causes the freeze. -- bcm43xx module is highly unstable https://launchpad.net/malone/bugs/34039 From mdz at ubuntu.com Tue Apr 11 00:39:51 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Tue, 11 Apr 2006 00:39:51 -0000 Subject: [Bug 36986] Re: [Breezy] skge bogus sensor References: <20060328113707.20484.27403.malonedeb@gangotri.ubuntu.com> Message-ID: <20060411003951.32233.90194.malone@gandwana.ubuntu.com> Rejecting superfluous tasks, bug remains open against linux-source ** Changed in: linux-image-2.6.12-10-386 (Ubuntu) Status: Unconfirmed => Rejected -- [Breezy] skge bogus sensor https://launchpad.net/malone/bugs/36986 From mdz at ubuntu.com Tue Apr 11 00:40:08 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Tue, 11 Apr 2006 00:40:08 -0000 Subject: [Bug 36986] Re: [Breezy] skge bogus sensor References: <20060328113707.20484.27403.malonedeb@gangotri.ubuntu.com> Message-ID: <20060411004008.24486.95484.malone@gangotri.ubuntu.com> Rejecting superfluous tasks, bug remains open against linux-source ** Changed in: linux-image-2.6.12-10-686-smp (Ubuntu) Status: Unconfirmed => Rejected -- [Breezy] skge bogus sensor https://launchpad.net/malone/bugs/36986 From mdz at ubuntu.com Tue Apr 11 00:40:22 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Tue, 11 Apr 2006 00:40:22 -0000 Subject: [Bug 36986] Re: [Breezy] skge bogus sensor References: <20060328113707.20484.27403.malonedeb@gangotri.ubuntu.com> Message-ID: <20060411004022.24516.75717.malone@gangotri.ubuntu.com> Please don't assign bugs ** Changed in: linux-source-2.6.12 (Ubuntu) Assignee: Ubuntu Kernel Team => (unassigned) -- [Breezy] skge bogus sensor https://launchpad.net/malone/bugs/36986 From mdz at ubuntu.com Tue Apr 11 00:40:00 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Tue, 11 Apr 2006 00:40:00 -0000 Subject: [Bug 36986] Re: [Breezy] skge bogus sensor References: <20060328113707.20484.27403.malonedeb@gangotri.ubuntu.com> Message-ID: <20060411004000.24486.16336.malone@gangotri.ubuntu.com> Rejecting superfluous tasks, bug remains open against linux-source ** Changed in: linux-image-2.6.12-10-686 (Ubuntu) Status: Unconfirmed => Rejected -- [Breezy] skge bogus sensor https://launchpad.net/malone/bugs/36986 From mdz at ubuntu.com Tue Apr 11 00:49:37 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Tue, 11 Apr 2006 00:49:37 -0000 Subject: [Bug 34870] Re: ipw2200 repeatedly crashes. References: <20060314104909.30082.87848.malonedeb@gandwana.ubuntu.com> Message-ID: <20060411004937.24516.7652.malone@gangotri.ubuntu.com> Please try to reproduce the bug on a text console and get a backtrace from the crash: https://wiki.ubuntu.com/DebuggingSystemCrash -- ipw2200 repeatedly crashes. https://launchpad.net/malone/bugs/34870 From mdz at ubuntu.com Tue Apr 11 00:50:24 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Tue, 11 Apr 2006 00:50:24 -0000 Subject: [Bug 20781] Re: pcmcia detection locks up my laptop [also dapper flight 5] References: <20060113140912.21012.22149.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060411005024.24486.24739.malone@gangotri.ubuntu.com> Can anyone get a backtrace from the crash? https://wiki.ubuntu.com/DebuggingSystemCrash Ben, surely a hang is indicative of a kernel issue rather than pcmcia-cs itself? -- pcmcia detection locks up my laptop [also dapper flight 5] https://launchpad.net/malone/bugs/20781 From mdz at ubuntu.com Tue Apr 11 01:23:57 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Tue, 11 Apr 2006 01:23:57 -0000 Subject: [Bug 35938] Re: ipw2200 driver fails to load firmware References: <20060322014802.30442.67351.malonedeb@gangotri.ubuntu.com> Message-ID: <20060411012357.24516.92185.malone@gangotri.ubuntu.com> According to comments, this problem is fixed in current Dapper. Closing. ** Summary changed: - ipw2200 driver fails to load firmware in linux-image-2.6.15-19-386 + ipw2200 driver fails to load firmware ** Changed in: linux-source-2.6.15 linux-image-2.6.15-19-386 (Ubuntu) Status: Unconfirmed => Fix Released -- ipw2200 driver fails to load firmware https://launchpad.net/malone/bugs/35938 From cleff at lognet.com.br Tue Apr 11 02:01:33 2006 From: cleff at lognet.com.br (C. Cartier) Date: Tue, 11 Apr 2006 02:01:33 -0000 Subject: [Bug 36986] Re: [Bug 36986] Re: [Breezy] skge bogus sensor References: <20060328113707.20484.27403.malonedeb@gangotri.ubuntu.com> <20060411004022.24516.75717.malone@gangotri.ubuntu.com> Message-ID: <443B0DFD.3030705@lognet.com.br> Sorry Matt... By the way, the Dapper Kernel works fine.... no SKGE sensor bug! Matt Zimmerman a écrit : > Please don't assign bugs > > ** Changed in: linux-source-2.6.12 (Ubuntu) > Assignee: Ubuntu Kernel Team => (unassigned) > -- [Breezy] skge bogus sensor https://launchpad.net/malone/bugs/36986 From mail at carthik.net Tue Apr 11 03:51:13 2006 From: mail at carthik.net (Carthik Sharma) Date: Tue, 11 Apr 2006 03:51:13 -0000 Subject: [Bug 26376] Re: SiS 7012 chip Breezy: Sound works fine but volume can only be set to mute or 100% References: <20060113144913.21012.21453.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060411035113.24516.36261.malone@gangotri.ubuntu.com> Hi art2003, You were requested to try this out with the latest Dapper since this might be one of many issues fixed upstream, or by work done in Ubuntu. So please let use know what results you get with the latest Dapper packages and kernel installed. Thank you for taking the time and effort to make Ubuntu better! -- SiS 7012 chip Breezy: Sound works fine but volume can only be set to mute or 100% https://launchpad.net/malone/bugs/26376 From pd at cipherfunk.org Tue Apr 11 04:12:42 2006 From: pd at cipherfunk.org (Paul Drain) Date: Tue, 11 Apr 2006 04:12:42 -0000 Subject: [Bug 39083] Laptop Fans are disabled after Flight 6 Upgrade References: <20060411041242.32313.142.malonedeb@gandwana.ubuntu.com> Message-ID: <20060411041242.32313.142.malonedeb@gandwana.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 linux-image-2.6.15-20-386 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: After upgrading to Flight 6 on a newly installed Flight 4 install, the fan on my laptop no longer seems to work after X boots. If I start the machine in rescue mode, the fan fires up OK and keeps the machine ~65degrees. If I exit the rescue mode, the fan shuts down after the "Checking Battery State" initscript starts. A standard boot process has the fans running until just before the GDM screen appears, then the fans seem to shut down. All other ACPI functions (battery life, thermal zone, etc) still work correctly, verified with an 'acpi -t' run. This results in a hard lock on AC or battery after a CPU intensive process (like Firefox + Evolution) has been running for an hour or so. The same hard lock can be obtained on AC by running gnome-screensaver with the footlogo-floaters theme. ** Attachment added: "Results of 'dmesg' on the affected machine" http://librarian.launchpad.net/2027891/compaqevo_n160_dmesg ** Attachment added: "... and dmidecode" http://librarian.launchpad.net/2027893/compaqevo_n160_dmidecode ** Attachment added: "... and lspci" http://librarian.launchpad.net/2027895/compaqevo_n160_lspci ** Attachment added: "... and the output of /proc/acpi/thermal_zone/*/*" http://librarian.launchpad.net/2027900/compaqevo_n160_proctz -- Laptop Fans are disabled after Flight 6 Upgrade https://launchpad.net/malone/bugs/39083 From keithcu at gmail.com Tue Apr 11 04:28:19 2006 From: keithcu at gmail.com (keithCu) Date: Tue, 11 Apr 2006 04:28:19 -0000 Subject: [Bug 34870] Re: ipw2200 repeatedly crashes. References: <20060314104909.30082.87848.malonedeb@gandwana.ubuntu.com> Message-ID: <20060411042819.32233.13063.malone@gandwana.ubuntu.com> I am running 2.6.15-20. The error I see is "firmware error detected. Restarting" in my dmesg and then 802.11 doesn't work and so I usually reboot. I don't see a stack trace or anything and I haven't noticed mouse freezes and such because it happens only every few hours but I'll be on the lookout for that and try to grab a dump. -- ipw2200 repeatedly crashes. https://launchpad.net/malone/bugs/34870 From ivoks at ubuntu.com Tue Apr 11 05:51:15 2006 From: ivoks at ubuntu.com (=?utf-8?q?Ante_Karamati=C4=87?=) Date: Tue, 11 Apr 2006 05:51:15 -0000 Subject: [Bug 34870] Re: ipw2200 repeatedly crashes. References: <20060314104909.30082.87848.malonedeb@gandwana.ubuntu.com> Message-ID: <20060411055115.32233.44298.malone@gandwana.ubuntu.com> In Benjamin's logs I noticed: Mar 27 09:39:10 amidrine kernel: [4296418.581000] ide: failed opcode was: unknown Mar 27 09:39:10 amidrine kernel: [4296418.581000] end_request: I/O error, dev hda, sector 64 Mar 27 09:39:10 amidrine kernel: [4296418.581000] isofs_fill_super: bread failed, dev=hda, iso_blknum=16, block=16 In Laestrygo's logs there is: Apr 8 12:16:36 localhost kernel: [4296623.801000] end_request: I/O error, dev hdc, sector 9098316 Apr 8 12:16:36 localhost kernel: [4296623.803000] end_request: I/O error, dev hdc, sector 9097808 Apr 8 12:16:36 localhost kernel: [4296623.803000] end_request: I/O error, dev hdc, sector 9097812 In Skort's logs kernel dies randomly on random errors. He acctually doesn't even use Ubuntu kernel, but his own. You can notice that most of the time when kernel dies, wifi-card is turned off (pw2200: Radio Frequency Kill Switch is On) I doubt this is ipw2200 problem, but something bad related to disks (at least in first two cases). I have ipw2200 and 72h uptime. -- ipw2200 repeatedly crashes. https://launchpad.net/malone/bugs/34870 From mail at carthik.net Tue Apr 11 05:54:41 2006 From: mail at carthik.net (Carthik Sharma) Date: Tue, 11 Apr 2006 05:54:41 -0000 Subject: [Bug 32304] Re: Kernel panic at intermittent times References: <20060221140456.23543.11246.malonedeb@gandwana.ubuntu.com> Message-ID: <20060411055442.24516.46675.malone@gangotri.ubuntu.com> Changing status to "Fix Released" since reporter says the problem does not persist. Thank you for reporting this bug. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Fix Committed => Fix Released -- Kernel panic at intermittent times https://launchpad.net/malone/bugs/32304 From ivoks at ubuntu.com Tue Apr 11 06:00:59 2006 From: ivoks at ubuntu.com (=?utf-8?q?Ante_Karamati=C4=87?=) Date: Tue, 11 Apr 2006 06:00:59 -0000 Subject: [Bug 29238] Re: Ambiguous oops in Yenta driver References: <20060120222049.16602.45571.malonedeb@gandwana.ubuntu.com> Message-ID: <20060411060059.32233.51101.malone@gandwana.ubuntu.com> Does this happen with -20 too? If it does, could you attach output of 'lspci | grep CardBus'? -- Ambiguous oops in Yenta driver https://launchpad.net/malone/bugs/29238 From rafa at dedaloingenieros.com Tue Apr 11 06:16:52 2006 From: rafa at dedaloingenieros.com (Rafael Jesus Alcantara Perez) Date: Tue, 11 Apr 2006 06:16:52 -0000 Subject: [Bug 37659] Re: The IPAQ module does not support WinCE Smart-phones References: <20060402001620.23733.73589.malonedeb@gandwana.ubuntu.com> Message-ID: <20060411061652.24516.18558.malone@gangotri.ubuntu.com> Yes, at least for me :) Many thanks for your fast response. -- The IPAQ module does not support WinCE Smart-phones https://launchpad.net/malone/bugs/37659 From ivoks at ubuntu.com Tue Apr 11 06:17:01 2006 From: ivoks at ubuntu.com (=?utf-8?q?Ante_Karamati=C4=87?=) Date: Tue, 11 Apr 2006 06:17:01 -0000 Subject: [Bug 31293] Re: My laptop doesn't resume from S3 ACPI sleep state. References: <20060213101035.1233.41596.malonedeb@gandwana.ubuntu.com> Message-ID: <20060411061701.24516.36452.malone@gangotri.ubuntu.com> What video driver do you use? I had same problem, but with new nvidia driver everything works fine. -- My laptop doesn't resume from S3 ACPI sleep state. https://launchpad.net/malone/bugs/31293 From aurelien.delahaye at gmail.com Tue Apr 11 06:20:46 2006 From: aurelien.delahaye at gmail.com (=?utf-8?q?Aur=C3=A9lien_Delahaye?=) Date: Tue, 11 Apr 2006 06:20:46 -0000 Subject: [Bug 36402] Re: [Bug 36402] Re: suspend on sharp PC-MW70J with 2.6.15-19 linux image version References: <20060324105822.5352.46968.malonedeb@gangotri.ubuntu.com> <20060410220354.32233.97646.malone@gandwana.ubuntu.com> Message-ID: Same error on 2.6.15-20, do you now where i can found .config of the version 2.6.15-18 ? 2006/4/11, Ben Collins : > How about with 2.6.15-20? > > ** Changed in: linux-source-2.6.15 linux-image-2.6.15-19-386 (Ubuntu) > Status: Unconfirmed => Needs Info > -- > suspend on sharp PC-MW70J with 2.6.15-19 linux image version > https://launchpad.net/malone/bugs/36402 > -- suspend on sharp PC-MW70J with 2.6.15-19 linux image version https://launchpad.net/malone/bugs/36402 From cybaix at gmail.com Tue Apr 11 06:48:44 2006 From: cybaix at gmail.com (Mark Dehus) Date: Tue, 11 Apr 2006 06:48:44 -0000 Subject: [Bug 37648] Re: Kernel <= 2.6.15-19 + Tecra A4 /w ACPI = No network/pci.. References: <20060401224812.23733.23703.malonedeb@gandwana.ubuntu.com> Message-ID: <20060411064844.32233.3146.malone@gandwana.ubuntu.com> Sorry about that Ben.. In my blindless I failed to see the link for adding an attachment :) I am giving the 2.6.15-20 kernel now (as well as the recently updated acpi-support package). ** Attachment added: "Dmesg output" http://librarian.launchpad.net/2028087/dmesg ** Attachment added: "output from lspci" http://librarian.launchpad.net/2028088/lspci -- Kernel <= 2.6.15-19 + Tecra A4 /w ACPI = No network/pci.. https://launchpad.net/malone/bugs/37648 From pedromj at gmail.com Tue Apr 11 06:58:30 2006 From: pedromj at gmail.com (pedromj) Date: Tue, 11 Apr 2006 06:58:30 -0000 Subject: [Bug 31293] Re: [Bug 31293] Re: My laptop doesn't resume from S3 ACPI sleep state. References: <20060213101035.1233.41596.malonedeb@gandwana.ubuntu.com> <20060411061701.24516.36452.malone@gangotri.ubuntu.com> Message-ID: <1144738710.5667.3.camel@localhost> El mar, 11-04-2006 a las 06:17 +0000, Ante Karamatić escribió: > What video driver do you use? I had same problem, but with new nvidia driver everything works fine. I'm using Dapper's driver for nvidia (8756). This is a new release upgraded yesterday and I need to test it. Have you got a Vaio VGN-FS285M or VGN-FS660W ? Regards, Pedro -- Pedro Martínez Juliá \ pedromj at gmail.com )| WebLog: http://www.pedromj.com/blog / Página web: http://www.pedromj.com GoogleTalk: pedromj at gmail.com Socio HispaLinux #311 Usuario Linux #275438 - http://counter.li.org -- My laptop doesn't resume from S3 ACPI sleep state. https://launchpad.net/malone/bugs/31293 From dennis at kaarsemaker.net Tue Apr 11 06:54:08 2006 From: dennis at kaarsemaker.net (Dennis Kaarsemaker) Date: Tue, 11 Apr 2006 06:54:08 -0000 Subject: [Bug 24017] Re: [Bug 24017] Re: system freeze during installation on laptop with Radeon IGP 320 References: <20060113142655.21012.92320.launchpad@macquarie.warthogs.hbd.com> <20060410171058.32313.62195.malone@gandwana.ubuntu.com> Message-ID: <1144738448.19602.55.camel@mirage> Carthik, the correct status for a rejected bug is "Rejected" status Rejected ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Fix Released => Rejected -- system freeze during installation on laptop with Radeon IGP 320 https://launchpad.net/malone/bugs/24017 From ivoks at ubuntu.com Tue Apr 11 07:14:51 2006 From: ivoks at ubuntu.com (=?utf-8?q?Ante_Karamati=C4=87?=) Date: Tue, 11 Apr 2006 07:14:51 -0000 Subject: [Bug 31293] Re: My laptop doesn't resume from S3 ACPI sleep state. References: <20060213101035.1233.41596.malonedeb@gandwana.ubuntu.com> Message-ID: <20060411071451.32233.67461.malone@gandwana.ubuntu.com> No, I have Dell, but this problem was on all laptops with nvidia prop. driver. So, try it (new nvidia-glx package solved this problem for me). Make sure you have /etc/default/acpi-support looking like this: SAVE_VBE_STATE=false POST_VIDEO=false USE_DPMS=true (you can try with false too) -- My laptop doesn't resume from S3 ACPI sleep state. https://launchpad.net/malone/bugs/31293 From casualprogrammer at yahoo.com Tue Apr 11 07:17:32 2006 From: casualprogrammer at yahoo.com (casualprogrammer) Date: Tue, 11 Apr 2006 07:17:32 -0000 Subject: [Bug 36487] Re: kernel compile fails with zd1211 errors References: <20060324210845.6253.76477.malonedeb@gandwana.ubuntu.com> Message-ID: <20060411071732.32313.16969.malone@gandwana.ubuntu.com> Hello Ben, thank you for your reply. Would it not make sense to make the installation of the linux-source dependent on linux-devel and all the rest being needed for a kernel build ? I don't think anybody downloading the kernel sources is doing that just to spend some surplus disk space. -- kernel compile fails with zd1211 errors https://launchpad.net/malone/bugs/36487 From michael.vogt at ubuntu.com Tue Apr 11 07:31:37 2006 From: michael.vogt at ubuntu.com (Michael Vogt) Date: Tue, 11 Apr 2006 07:31:37 -0000 Subject: [Bug 38461] Re: unstable ordering of eth devices References: <20060406182215.24516.22276.malonedeb@gangotri.ubuntu.com> Message-ID: <20060411073137.32313.70704.malone@gandwana.ubuntu.com> We could add this, sure. What needs to be done? Cheers, Michael -- unstable ordering of eth devices https://launchpad.net/malone/bugs/38461 From avilella at gmail.com Tue Apr 11 08:10:27 2006 From: avilella at gmail.com (Albert Vilella) Date: Tue, 11 Apr 2006 08:10:27 -0000 Subject: [Bug 37164] Re: sky2 ethernet driver problems References: <20060329134103.6279.17661.malonedeb@gandwana.ubuntu.com> Message-ID: <20060411081027.32313.85687.malone@gandwana.ubuntu.com> It crashed my computer again this morning. uname -a Linux magneto 2.6.15-20-686 #1 SMP PREEMPT Tue Apr 4 18:37:00 UTC 2006 i686 GNU/Linux Some more information about the device: 0000:07:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8036 Fast Ethernet Controller (rev 15) Subsystem: Sony Corporation: Unknown device 81e6 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Apr 11 09:05:38 localhost kernel: [4294683.472000] sky2 v1.1 addr 0xd8000000 irq 185 Yukon-FE (0xb7) rev 1 Apr 11 09:05:38 localhost kernel: [4294683.472000] sky2 eth0: addr 00:01:4a:f5:57:01 -- sky2 ethernet driver problems https://launchpad.net/malone/bugs/37164 From arturuk at gmail.com Tue Apr 11 08:32:09 2006 From: arturuk at gmail.com (art2003) Date: Tue, 11 Apr 2006 08:32:09 -0000 Subject: [Bug 26376] Re: [Bug 26376] Re: SiS 7012 chip Breezy: Sound works fine but volume can only be set to mute or 100% References: <20060113144913.21012.21453.launchpad@macquarie.warthogs.hbd.com> <20060411035113.24516.36261.malone@gangotri.ubuntu.com> Message-ID: Hello, I am happy to try a Dapper live cd and report whether this issue persists. Can you tell me where can I download a dapper live cd? Cheers, Art On 11/04/06, Carthik Sharma wrote: > Hi art2003, > > You were requested to try this out with the latest Dapper since this might be one of many issues fixed upstream, or by work done in Ubuntu. So please let use know what results you get with the latest Dapper packages and kernel installed. > > Thank you for taking the time and effort to make Ubuntu better! > > -- > SiS 7012 chip Breezy: Sound works fine but volume can only be set to mute or 100% > https://launchpad.net/malone/bugs/26376 > -- /---------------------------------------------- Linux user number 103022 At http://counter.li.org/ -- SiS 7012 chip Breezy: Sound works fine but volume can only be set to mute or 100% https://launchpad.net/malone/bugs/26376 From pedromj at gmail.com Tue Apr 11 08:45:57 2006 From: pedromj at gmail.com (pedromj) Date: Tue, 11 Apr 2006 08:45:57 -0000 Subject: [Bug 31293] Re: [Bug 31293] Re: My laptop doesn't resume from S3 ACPI sleep state. References: <20060213101035.1233.41596.malonedeb@gandwana.ubuntu.com> <20060411071451.32233.67461.malone@gandwana.ubuntu.com> Message-ID: <1144745158.5667.7.camel@localhost> When I try to resume, my laptop dont work (caps-lock doesn't work) and hard drive light is always on. In the past I've read that it could be problem in the initialization of my hard drive. Thank you very much for your help. Regards, Pedro -- Pedro Martínez Juliá \ pedromj at gmail.com )| WebLog: http://www.pedromj.com/blog / Página web: http://www.pedromj.com GoogleTalk: pedromj at gmail.com Socio HispaLinux #311 Usuario Linux #275438 - http://counter.li.org -- My laptop doesn't resume from S3 ACPI sleep state. https://launchpad.net/malone/bugs/31293 From thomas.beckett at gmail.com Tue Apr 11 08:58:33 2006 From: thomas.beckett at gmail.com (Thomas Beckett) Date: Tue, 11 Apr 2006 08:58:33 -0000 Subject: [Bug 6550] Re: Grub wont uncompress kernel image References: <20060108150918.15433.4157.malonedeb@gangotri.ubuntu.com> Message-ID: <20060411085833.24486.79859.malone@gangotri.ubuntu.com> *** This bug is a duplicate of bug 33939 *** If it is your dapper install that has this problem then you can either reinstall using the latest daily cd which fixes this problem or you can do the following: *Boot any linux LiveCD *bring up a terminal and mount your installed partition mount /dev/hda3 /mnt (change hda3 to reflect your partition) *chroot /mnt *source /etc/profile *apt-get update *apt-get dist-upgrade This will update the installed partition with the latest packages including the new build of the kernel that has EDD turned off. Reboot and it should load fine. Hope it helps -- Grub wont uncompress kernel image https://launchpad.net/malone/bugs/6550 From frederik.van.slycken at gmail.com Tue Apr 11 09:03:37 2006 From: frederik.van.slycken at gmail.com (Black Horizon) Date: Tue, 11 Apr 2006 09:03:37 -0000 Subject: [Bug 6029] Re: screen flickers with vga16fb References: <20051221214735.24631.23284.malonedeb@gangotri.ubuntu.com> Message-ID: <20060411090337.24486.15960.malone@gangotri.ubuntu.com> *** This bug is a duplicate of bug 24270 *** indeed, adding vga=normal to my grub menu.lst has solved the problem (more or less) I suppose I should go mark this bug as duplicate? (sorry, I'm rather new to this launchpad-system and everything) ** This bug has been marked a duplicate of bug 24270 Screen flickering -- screen flickers with vga16fb https://launchpad.net/malone/bugs/6029 From frederik.van.slycken at gmail.com Tue Apr 11 09:04:06 2006 From: frederik.van.slycken at gmail.com (Black Horizon) Date: Tue, 11 Apr 2006 09:04:06 -0000 Subject: [Bug 24270] Re: Screen flickering References: <20060113142814.21012.74045.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060411090406.24516.85705.launchpad@gangotri.ubuntu.com> ** Bug 6029 has been marked a duplicate of this bug -- Screen flickering https://launchpad.net/malone/bugs/24270 From ivoks at ubuntu.com Tue Apr 11 09:12:19 2006 From: ivoks at ubuntu.com (=?utf-8?q?Ante_Karamati=C4=87?=) Date: Tue, 11 Apr 2006 09:12:19 -0000 Subject: [Bug 31293] Re: [Bug 31293] Re: [Bug 31293] Re: My laptop doesn't resume from S3 ACPI sleep state. References: <20060213101035.1233.41596.malonedeb@gandwana.ubuntu.com> <20060411071451.32233.67461.malone@gandwana.ubuntu.com> <1144745158.5667.7.camel@localhost> Message-ID: <443B72F3.5040308@ubuntu.com> pedromj wrote: > When I try to resume, my laptop dont work (caps-lock doesn't work) and > hard drive light is always on. Sorry, I forgot. Add: Option "NvAGP" "1" to /etc/X11/xorg.conf (under Nvidia card Device section) and: blacklist intel_agp to /etc/modprobe.d/blacklist if you have Intel chipset. If it's some else chipset, check /usr/share/doc/nvidia-glx/README.txt.gz to see if it is supported (Appendix F). If it is supported, you have to find out what module you use (lsmod | grep agp). Reboot and then try to suspend. This is exact same behaviour I had untill I did this changes. It's a bug in nvidia module wich Nvidia is aware of. You can try with nv module in X, and it should work (but then it's SAVE_VBE_STATE=true). -- Ante Karamatic | 0xD3BDA225 | 0x0A4A0161 ivoks at grad.hr | ivoks at ubuntu.com | ivoks.blogspot.com "Tomorrow is my day off, so please stay off the powder!" -- My laptop doesn't resume from S3 ACPI sleep state. https://launchpad.net/malone/bugs/31293 From viktor.nagy at gmail.com Tue Apr 11 09:22:19 2006 From: viktor.nagy at gmail.com (ViktorNagy) Date: Tue, 11 Apr 2006 09:22:19 -0000 Subject: [Bug 35057] Re: Cannot read LCD status References: <20060315144109.11105.73961.malonedeb@gandwana.ubuntu.com> Message-ID: <20060411092219.24486.10913.malone@gangotri.ubuntu.com> I have this same bug an my ASUS A2500D. For me the not so nice and hopefullly only temporal solution was to shut down kmilo. -- Cannot read LCD status https://launchpad.net/malone/bugs/35057 From thomas.beckett at gmail.com Tue Apr 11 09:35:58 2006 From: thomas.beckett at gmail.com (Thomas Beckett) Date: Tue, 11 Apr 2006 09:35:58 -0000 Subject: [Bug 6550] Re: Grub wont uncompress kernel image References: <20060108150918.15433.4157.malonedeb@gangotri.ubuntu.com> Message-ID: <20060411093558.24486.5273.malone@gangotri.ubuntu.com> *** This bug is a duplicate of bug 33939 *** If it is your dapper install that has this problem then you can either reinstall using the latest daily cd which fixes this problem or you can do the following: *Boot any linux LiveCD *bring up a terminal and mount your installed partition mount /dev/hda3 /mnt (change hda3 to reflect your partition) *chroot /mnt *source /etc/profile *apt-get update *apt-get dist-upgrade This will update the installed partition with the latest packages including the new build of the kernel that has EDD turned off. Reboot and it should load fine. Hope it helps -- Grub wont uncompress kernel image https://launchpad.net/malone/bugs/6550 From sheutlin at gmx.de Tue Apr 11 10:12:28 2006 From: sheutlin at gmx.de (Sebastian Heutling) Date: Tue, 11 Apr 2006 10:12:28 -0000 Subject: [Bug 36622] Re: [Bug 36622] Re: No sound on iBook 2 rev. 2 References: <20060325192126.20484.96645.malonedeb@gangotri.ubuntu.com> <20060410214334.32313.72055.malone@gandwana.ubuntu.com> Message-ID: <443B810C.2050201@gmx.de> Ben Collins wrote: > Please try 2.6.15-20 > > ** Changed in: linux-source-2.6.15 linux-image-2.6.15-19-powerpc (Ubuntu) > Status: Unconfirmed => Needs Info Makes no difference - it still doesn't work. Is there any other information I can provide that could help? -- No sound on iBook 2 rev. 2 https://launchpad.net/malone/bugs/36622 From benwilliam at freenet.de Tue Apr 11 10:44:52 2006 From: benwilliam at freenet.de (benwilliam) Date: Tue, 11 Apr 2006 10:44:52 -0000 Subject: [Bug 39114] prism WLAN Card firmware problem References: <20060411104452.24486.61371.malonedeb@gangotri.ubuntu.com> Message-ID: <20060411104452.24486.61371.malonedeb@gangotri.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 kernel-image-2.6.15-20-386-di (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: after updating kernel from 2.6.15-19 to 2.6.15-20 my pcmcia wlan card doesn't start anymore. The following message appears on screen "could't load firmware ('isl3886') -- prism WLAN Card firmware problem https://launchpad.net/malone/bugs/39114 From vyruss at freemail.gr Tue Apr 11 10:40:55 2006 From: vyruss at freemail.gr (Jimmy Angelakos) Date: Tue, 11 Apr 2006 10:40:55 -0000 Subject: [Bug 37876] Re: Kernel does not read DVDs, no automount References: <20060403143410.25863.56627.malonedeb@gangotri.ubuntu.com> Message-ID: <20060411104055.32233.19097.malone@gandwana.ubuntu.com> Sorry, this was a typo, I meant to say it worked fine in 5.10 Breezy and no longer works in 6.06 Dapper. -- Kernel does not read DVDs, no automount https://launchpad.net/malone/bugs/37876 From cjwatson at canonical.com Tue Apr 11 10:58:30 2006 From: cjwatson at canonical.com (Colin Watson) Date: Tue, 11 Apr 2006 10:58:30 -0000 Subject: [Bug 39114] Re: prism WLAN Card firmware problem References: <20060411104452.24486.61371.malonedeb@gangotri.ubuntu.com> Message-ID: <20060411105831.32313.55087.launchpad@gandwana.ubuntu.com> ** Changed in: linux-source-2.6.15 kernel-image-2.6.15-20-386-di (Ubuntu) Binarypackagename: kernel-image-2.6.15-20-386-di => None -- prism WLAN Card firmware problem https://launchpad.net/malone/bugs/39114 From manuelsspace-registros at yahoo.com Tue Apr 11 12:03:58 2006 From: manuelsspace-registros at yahoo.com (manuel) Date: Tue, 11 Apr 2006 12:03:58 -0000 Subject: [Bug 33162] Re: [Bug 33162] Re: Acer Travel Mate 3210 needs acpi=off References: <20060228154534.17498.22123.malonedeb@gangotri.ubuntu.com> <20060410140029.32313.60099.malone@gandwana.ubuntu.com> Message-ID: <200604110803.58436.manuelsspace-registros@yahoo.com> El día Monday 10 April 2006 10:00, Ben Collins escribió: > Flight 6 is not a released CD, it's beta. What he is saying is that this is > fixed in a newer kernel in our dist. One which you can probably test using > a daily ISO. No one is refering to 2.6.16 at all. I did dist-upgrate to Ubuntu 6.06 "Dapper Drake" Development Branch just yesterday and it works perfect: AC/Battery, CPU Speed, ipw2200 kill switch. Does developers receive Live CD bugs in another repository? I've others bugs to report. Thanks, My TravelMate 3210WXCi is working perfect now! -- Acer Travel Mate 3210 needs acpi=off https://launchpad.net/malone/bugs/33162 From tfheen at canonical.com Tue Apr 11 12:12:44 2006 From: tfheen at canonical.com (Tollef Fog Heen) Date: Tue, 11 Apr 2006 12:12:44 -0000 Subject: [Bug 33162] Re: [Bug 33162] Re: [Bug 33162] Re: Acer Travel Mate 3210 needs acpi=off References: <20060228154534.17498.22123.malonedeb@gangotri.ubuntu.com> <20060410140029.32313.60099.malone@gandwana.ubuntu.com> <200604110803.58436.manuelsspace-registros@yahoo.com> Message-ID: <87u0905n0j.fsf@thosu.err.no> * manuel | Ubuntu 6.06 "Dapper Drake" Development Branch | just yesterday and it works perfect: AC/Battery, CPU Speed, ipw2200 kill | switch. Excellent. | Does developers receive Live CD bugs in another repository? I've others bugs | to report. Bugs against the live cd should most likely be filed against the «casper» package. -- Tollef Fog Heen ,''`. UNIX is user friendly, it's just picky about who its friends are : :' : `. `' `- -- Acer Travel Mate 3210 needs acpi=off https://launchpad.net/malone/bugs/33162 From pedromj at gmail.com Tue Apr 11 12:26:58 2006 From: pedromj at gmail.com (pedromj) Date: Tue, 11 Apr 2006 12:26:58 -0000 Subject: [Bug 31293] Re: [Bug 31293] Re: [Bug 31293] Re: [Bug 31293] Re: My laptop doesn't resume from S3 ACPI sleep state. References: <20060213101035.1233.41596.malonedeb@gandwana.ubuntu.com> <20060411071451.32233.67461.malone@gandwana.ubuntu.com> <1144745158.5667.7.camel@localhost> <443B72F3.5040308@ubuntu.com> Message-ID: <1144758418.4224.3.camel@localhost> I've done all of this (also, I've unloaded ipw2200) and it still doesn't suspend to RAM. :( In the past I've done a test (kernel patch) that runs all suspend code but just before send "suspend" to the hardware it sends "resume" and it works. It seems that it is not a Linux-Suspend problem, it's a hardware initialization problem. Thank you very much for your help. Regards, Pedro -- Pedro Martínez Juliá \ pedromj at gmail.com )| WebLog: http://www.pedromj.com/blog / Página web: http://www.pedromj.com GoogleTalk: pedromj at gmail.com Socio HispaLinux #311 Usuario Linux #275438 - http://counter.li.org -- My laptop doesn't resume from S3 ACPI sleep state. https://launchpad.net/malone/bugs/31293 From mail at carthik.net Tue Apr 11 13:03:26 2006 From: mail at carthik.net (Carthik Sharma) Date: Tue, 11 Apr 2006 13:03:26 -0000 Subject: [Bug 26376] Re: SiS 7012 chip Breezy: Sound works fine but volume can only be set to mute or 100% References: <20060113144913.21012.21453.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060411130326.32233.24877.malone@gandwana.ubuntu.com> Hi, You can get the CD image at: http://cdimage.ubuntu.com/releases/dapper/flight-6/ Thanks. -- SiS 7012 chip Breezy: Sound works fine but volume can only be set to mute or 100% https://launchpad.net/malone/bugs/26376 From traemccombs at gmail.com Tue Apr 11 13:46:39 2006 From: traemccombs at gmail.com (Trae McCombs) Date: Tue, 11 Apr 2006 13:46:39 -0000 Subject: [Bug 38822] Volume key controls "Phone Out" NOT Volume. References: <20060409041708.24516.39190.malonedeb@gangotri.ubuntu.com> Message-ID: <20060411134639.32233.883.launchpad@canonical@gandwana.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Needs Info Description: Hello, I have recently (a few hours ago) purchased the Microsoft Wireless Laser Desktop 6000 Keyboard / Mouse combo. I was actually excited when I was able to configure the mail key to launch firefox + gmail.com. The sound/volume keys seem to operate "Phone out" instead of Volume. I ascertained this by installing and running aumix. heck, I didn't even know you could use these special keys under Linux at all. If they could be made to work, I could see how it'd be very useful. Thanks in advance. Trae Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Needs Info Description: Hello, I have recently (a few hours ago) purchased the Microsoft Wireless Laser Desktop 6000 Keyboard / Mouse combo. I was actually excited when I was able to configure the mail key to launch firefox + gmail.com. The sound/volume keys seem to operate "Phone out" instead of Volume. I ascertained this by installing and running aumix. heck, I didn't even know you could use these special keys under Linux at all. If they could be made to work, I could see how it'd be very useful. Thanks in advance. Trae -- Volume key controls "Phone Out" NOT Volume. https://launchpad.net/malone/bugs/38822 From ubuntu at paul.sladen.org Tue Apr 11 13:46:39 2006 From: ubuntu at paul.sladen.org (Paul Sladen) Date: Tue, 11 Apr 2006 13:46:39 -0000 Subject: [Bug 38822] Re: Volume key controls "Phone Out" NOT Volume. References: <20060409041708.24516.39190.malonedeb@gangotri.ubuntu.com> Message-ID: <20060411134639.32233.91609.malone@gandwana.ubuntu.com> Hello Trae, Oh, our support is better than that. It's a BUG if they don't work out of the box as soon as you plug it in. In this case, the WWW key should send the correct code to automatically open a web-browser anyway (but you are of course free to remap that). In the case of the volume keys, they are working aswell and send the correct key-codes; however in the kernel/ALSA (the sound drivers) the main mixer channels are getting mis-detected. These are wired differently on each laptop and need work arounds; can you paste the dmi output shown on the bottom of: http://wiki.ubuntu.com/LaptopTestingTeam/HotkeyResearch so that we can identify your laptop. 'aumixer' is not actually a good tool to test this as it uses the legacy OSS interface. Could you try with 'alsamixer' and see which channel is actually your main mixer channel? ** Changed in: hotkey-setup (Ubuntu) Sourcepackagename: hotkey-setup => linux-source-2.6.15 Binarypackagename: hotkey-setup => None Status: Unconfirmed => Needs Info ** Summary changed: - Volume key controls "Phone Out" NOT Volume. + [alsa] volume keys move "Phone Out" instead of main mixer Volume. -- [alsa] volume keys move "Phone Out" instead of main mixer Volume. https://launchpad.net/malone/bugs/38822 From traemccombs at gmail.com Tue Apr 11 14:21:37 2006 From: traemccombs at gmail.com (Trae McCombs) Date: Tue, 11 Apr 2006 14:21:37 -0000 Subject: [Bug 38822] Re: [Bug 38822] Re: Volume key controls "Phone Out" NOT Volume. References: <20060409041708.24516.39190.malonedeb@gangotri.ubuntu.com> <20060411134639.32233.91609.malone@gandwana.ubuntu.com> Message-ID: On 4/11/06, Paul Sladen wrote: > > Hello Trae, Howdy Paul! Oh, our support is better than that. It's a BUG if they don't work out of > the box as soon as you plug it in. Nifty to know... In this case, the WWW key should send the correct code to automatically open > a web-browser anyway (but you are of course free to remap that). Yeah, it doesn't seem to open a browser, unless I've never tried it with a browser not open. (meaning it's not opening a new window ala: -new) In the case of the volume keys, they are working aswell and send the correct > key-codes; however in the kernel/ALSA (the sound drivers) the main mixer > channels are getting mis-detected. These are wired differently on each > laptop and need work arounds; can you paste the dmi output shown on the > bottom of: > > http://wiki.ubuntu.com/LaptopTestingTeam/HotkeyResearch october at flight6:~$ sudo dmidecode -s system-manufacturer october at flight6:~$ sudo dmidecode -s system-product-name october at flight6:~$ sudo dmidecode -s system-version october at flight6:~$ Paul, Only thing is, this is a desktop, not a laptop. :) I have recently bought a Microsoft keyboard: >From the back of the keyboard Microsoft Wireless Comfort Keyboard: 1.0A Model: 1027 >From the box it came in Microsoft Wireless Laser Desktop 6000 * High Definition Laser technology * Magnifier * 5 Customizable Mouse buttons * Comfort Curve Keyboard Design (it is comfy! :) Is there anything else I should do? Also, it'd be neat to be able to program these buttons for things, that is for sure. Not sure I need the zoom to magnify, but what would be cool is to have the zoom thing work as a scroll button allowing you to scroll up and down in a browser or any window. Thanks in advance! Trae -- Trae McCombs || http://occy.net/ Founder - Themes.org // Linux.com CivicSpaceLabs - http://civicspacelabs.org/ -- [alsa] volume keys move "Phone Out" instead of main mixer Volume. https://launchpad.net/malone/bugs/38822 From ankur.kotwal at gmail.com Tue Apr 11 14:26:19 2006 From: ankur.kotwal at gmail.com (Ankur Kotwal) Date: Tue, 11 Apr 2006 14:26:19 -0000 Subject: [Bug 21779] Re: Dell XPS Gen 2 does not resume after suspend References: <20060113141442.21012.50340.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060411142619.24486.53281.malone@gangotri.ubuntu.com> This problem is resolved after getting nvidia-glx 1.0.8756+2.6.15.8-1. Suspend works a treat now! -- Dell XPS Gen 2 does not resume after suspend https://launchpad.net/malone/bugs/21779 From ankur.kotwal at gmail.com Tue Apr 11 14:27:11 2006 From: ankur.kotwal at gmail.com (Ankur Kotwal) Date: Tue, 11 Apr 2006 14:27:11 -0000 Subject: [Bug 21779] Re: Dell XPS Gen 2 does not resume after suspend References: <20060113141442.21012.50340.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060411142711.32233.17358.malone@gandwana.ubuntu.com> Fixed by nvidia-glx 1.0.8756+2.6.15.8-1. Setting status accordingly. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Confirmed => Fix Released -- Dell XPS Gen 2 does not resume after suspend https://launchpad.net/malone/bugs/21779 From skauchali at gmail.com Tue Apr 11 14:35:18 2006 From: skauchali at gmail.com (shuttleworthwannabe) Date: Tue, 11 Apr 2006 14:35:18 -0000 Subject: [Bug 39138] PCI resource errors and unable to reboot system References: <20060411132552.24486.98960.malonedeb@gangotri.ubuntu.com> Message-ID: <20060411143518.24516.36771.launchpad@canonical@gangotri.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: Hardware HP Compaq nw8240 Pentium Cntrino 2.13GHz 2G RAM 80 5400RPM HDD ATI Mobility FireGL V5000 15.4" UXGA widescreen Dapper Drake 20060410 Daily build This is my first bug report, so I have very little experience in reporting this. I will do my best to explain. I am also fairly new to Linux but am a quick learner. I have been using Ubuntu since january 2006 and dapper when it was flight 2 or 3. Whenever I boot dapper I get this meesage at boot up screen just prior to the splash screen: == PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.1 PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.1 PCI: Cannot allocate resource region 9 of bridge 0000:00:1c.1 === But thh system boots normally into the GUI login screen. However, when i want to reboot the system, the system hangs and in console I see this message: == [4294829.614000] No reboot fixup found for your hardware == NOTE: with Breezy I can reboot normally without any errors as above. and with Dapper prior to 5+ I could reboot normally, something in Dapper 5+ has changed to cause this reboot problem. I have the ATI fglrx drivers installed from Ubuntu and I know it is working, kinda, because whenver I log out as user, the login screen flickers and the omage if unclear; I have to ctrl alt and backspace to reload the X server. Here is my fglrxinfo: == $ fglrxinfo display: :0.0 screen: 0 OpenGL vendor string: ATI Technologies Inc. OpenGL renderer string: MOBILITY FireGL V5000 Pentium 4 (SSE2) (FireGL) (GNU_ICD) OpenGL version string: 2.0.5695 (8.23.7) == I can post my xorg.conf if needed. Thank you for taking this report. Shu Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: Hardware HP Compaq nw8240 Pentium Cntrino 2.13GHz 2G RAM 80 5400RPM HDD ATI Mobility FireGL V5000 15.4" UXGA widescreen Dapper Drake 20060410 Daily build This is my first bug report, so I have very little experience in reporting this. I will do my best to explain. I am also fairly new to Linux but am a quick learner. I have been using Ubuntu since january 2006 and dapper when it was flight 2 or 3. Whenever I boot dapper I get this meesage at boot up screen just prior to the splash screen: == PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.1 PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.1 PCI: Cannot allocate resource region 9 of bridge 0000:00:1c.1 === But thh system boots normally into the GUI login screen. However, when i want to reboot the system, the system hangs and in console I see this message: == [4294829.614000] No reboot fixup found for your hardware == NOTE: with Breezy I can reboot normally without any errors as above. and with Dapper prior to 5+ I could reboot normally, something in Dapper 5+ has changed to cause this reboot problem. I have the ATI fglrx drivers installed from Ubuntu and I know it is working, kinda, because whenver I log out as user, the login screen flickers and the omage if unclear; I have to ctrl alt and backspace to reload the X server. Here is my fglrxinfo: == $ fglrxinfo display: :0.0 screen: 0 OpenGL vendor string: ATI Technologies Inc. OpenGL renderer string: MOBILITY FireGL V5000 Pentium 4 (SSE2) (FireGL) (GNU_ICD) OpenGL version string: 2.0.5695 (8.23.7) == I can post my xorg.conf if needed. Thank you for taking this report. Shu -- PCI resource errors and unable to reboot system https://launchpad.net/malone/bugs/39138 From cjwatson at canonical.com Tue Apr 11 14:35:18 2006 From: cjwatson at canonical.com (Colin Watson) Date: Tue, 11 Apr 2006 14:35:18 -0000 Subject: [Bug 39138] Re: PCI resource errors and unable to reboot system References: <20060411132552.24486.98960.malonedeb@gangotri.ubuntu.com> Message-ID: <20060411143518.24516.65098.launchpad@gangotri.ubuntu.com> ** Changed in: debian-installer-utils di-utils-reboot (Ubuntu) Sourcepackagename: debian-installer-utils => linux-source-2.6.15 Binarypackagename: di-utils-reboot => None -- PCI resource errors and unable to reboot system https://launchpad.net/malone/bugs/39138 From cbinusa at gmail.com Tue Apr 11 15:14:23 2006 From: cbinusa at gmail.com (cbinusa) Date: Tue, 11 Apr 2006 15:14:23 -0000 Subject: [Bug 38473] Re: [Bug 38473] Re: DWL-g650 not configurable References: <20060406190702.24516.69199.malonedeb@gangotri.ubuntu.com> <20060410143142.32233.28861.malone@gandwana.ubuntu.com> Message-ID: Where do I find this kernel? Also, overall, everything else seems to work fine on my Presario 900US. On 4/10/06, Ben Collins wrote: > Please retest with 2.6.15-20 kernel. > -- > DWL-g650 not configurable > https://launchpad.net/malone/bugs/38473 > -- DWL-g650 not configurable https://launchpad.net/malone/bugs/38473 From scott at ubuntu.com Tue Apr 11 15:18:19 2006 From: scott at ubuntu.com (Scott James Remnant) Date: Tue, 11 Apr 2006 15:18:19 -0000 Subject: [Bug 38461] Re: unstable ordering of eth devices References: <20060406182215.24516.22276.malonedeb@gangotri.ubuntu.com> Message-ID: <20060411151819.32313.93060.malone@gandwana.ubuntu.com> Can/does the Upgrade Tool prompt users to ask them whether they want something to happen or not? What needs to be done is we need to iterate /sys/class/net for all the interfaces connected and write a new /etc/iftab (if the user wants) to fix those names; making sure to not write lines where there are duplicated addresses (SPARC usually). -- unstable ordering of eth devices https://launchpad.net/malone/bugs/38461 From ressu at ressukka.net Tue Apr 11 15:32:36 2006 From: ressu at ressukka.net (Sami Haahtinen) Date: Tue, 11 Apr 2006 15:32:36 -0000 Subject: [Bug 29238] Re: Ambiguous oops in Yenta driver References: <20060120222049.16602.45571.malonedeb@gandwana.ubuntu.com> Message-ID: <20060411153236.24516.95048.malone@gangotri.ubuntu.com> Sadly i don't have the hardware anymore, so i'm unable to test this. You can close the bug if nobody else steps up to test it. -- Ambiguous oops in Yenta driver https://launchpad.net/malone/bugs/29238 From cybaix at gmail.com Tue Apr 11 15:31:34 2006 From: cybaix at gmail.com (Mark Dehus) Date: Tue, 11 Apr 2006 15:31:34 -0000 Subject: [Bug 37648] Re: Kernel <= 2.6.15-19 + Tecra A4 /w ACPI = No network/pci.. References: <20060401224812.23733.23703.malonedeb@gandwana.ubuntu.com> Message-ID: <20060411153134.32233.91206.malone@gandwana.ubuntu.com> Updating the kernel seems to have fixed the problem. But after I installed/recompiled the ATI drivers the problem came back. I have been following the directions from http://wiki.cchtml.com/index.php/Ubuntu_Dapper_Installation_Guide to do the install (not using the dapper packages, last time I tried them my card would no longer do 1280x800). ** Attachment added: "Instructions used to install ATI drivers.." http://librarian.launchpad.net/2032522/ati-instructions.txt -- Kernel <= 2.6.15-19 + Tecra A4 /w ACPI = No network/pci.. https://launchpad.net/malone/bugs/37648 From casualprogrammer at yahoo.com Tue Apr 11 15:55:43 2006 From: casualprogrammer at yahoo.com (casualprogrammer) Date: Tue, 11 Apr 2006 15:55:43 -0000 Subject: [Bug 36487] Re: kernel compile fails with zd1211 errors References: <20060324210845.6253.76477.malonedeb@gandwana.ubuntu.com> Message-ID: <20060411155543.24516.75416.malone@gangotri.ubuntu.com> I just tried your tip, Ben, all I get is: cjp at WORKSTATION3U:~$ sudo apt-get install linux-devel Reading package lists... Done Building dependency tree... Done E: Couldn't find package linux-devel -- kernel compile fails with zd1211 errors https://launchpad.net/malone/bugs/36487 From carl at system76.com Tue Apr 11 15:55:13 2006 From: carl at system76.com (Carl Richell) Date: Tue, 11 Apr 2006 15:55:13 -0000 Subject: [Bug 35742] Re: Missing support for 945GM chipset References: <20060320171618.8118.14819.malonedeb@gandwana.ubuntu.com> Message-ID: <20060411155513.24486.68380.malone@gangotri.ubuntu.com> Thanks Paul - Bug #39154 -- Missing support for 945GM chipset https://launchpad.net/malone/bugs/35742 From tommy at home.tig-grr.com Tue Apr 11 16:27:04 2006 From: tommy at home.tig-grr.com (Tom Marshall) Date: Tue, 11 Apr 2006 16:27:04 -0000 Subject: [Bug 39160] swsusp/hibernate started hanging recently References: <20060411162704.32233.18489.malonedeb@gandwana.ubuntu.com> Message-ID: <20060411162704.32233.18489.malonedeb@gandwana.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 linux-image-2.6.15-20-686 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: Somewhere in the last couple of weeks swsusp has started to hang the machine, requiring a hard power cycle. System: Thinkpad T42 with latest Dapper packages. How to reproduce: # echo disk > /sys/power/state Expected behavior: Suspend to disk Observed behavior: Machine becomes completely unresponsive. -- swsusp/hibernate started hanging recently https://launchpad.net/malone/bugs/39160 From kris.nuttycombe at gmail.com Tue Apr 11 16:43:09 2006 From: kris.nuttycombe at gmail.com (Kris Nuttycombe) Date: Tue, 11 Apr 2006 16:43:09 -0000 Subject: [Bug 34781] Re: [Dapper] boot fails on HP Pavilion dv5000 References: <20060313160554.17044.88668.malonedeb@gangotri.ubuntu.com> Message-ID: <20060411164309.24516.65441.malone@gangotri.ubuntu.com> I can confirm this bug. As a note, it doesn't appear to be an Ubuntu-specific probem: I also get the same error when booting a 2.6.15-gentoo kernel and can only work around it using acpi=off noapic. -- [Dapper] boot fails on HP Pavilion dv5000 https://launchpad.net/malone/bugs/34781 From jonesypeter at hotmail.com Tue Apr 11 16:53:25 2006 From: jonesypeter at hotmail.com (Peter) Date: Tue, 11 Apr 2006 16:53:25 -0000 Subject: [Bug 35635] RE: [Bug 35635] Re: Halts on Boot after Installation References: <20060319201635.12254.13260.malonedeb@gandwana.ubuntu.com> <20060410134802.24516.69915.malone@gangotri.ubuntu.com> Message-ID: Please could you give me the web address where I download the daily builds, so I can make sure I download an ISO with the new kernel? Many thanks >From: Ben Collins >Reply-To: Bug 35635 <35635 at bugs.launchpad.net> >To: jonesypeter at hotmail.com >Subject: [Bug 35635] Re: Halts on Boot after Installation >Date: Mon, 10 Apr 2006 13:48:01 -0000 > >This should be fixed in the 2.6.15-20 kernels. > >** Changed in: linux-source-2.6.15 (Ubuntu) > Status: Unconfirmed => Fix Released >-- >Halts on Boot after Installation >https://launchpad.net/malone/bugs/35635 -- Halts on Boot after Installation https://launchpad.net/malone/bugs/35635 From i_soumpasis-ami at yahoo.gr Tue Apr 11 16:50:30 2006 From: i_soumpasis-ami at yahoo.gr (I-soumpasis-ami) Date: Tue, 11 Apr 2006 16:50:30 -0000 Subject: [Bug 27889] Re: kernel does not detect usb 2.0 mp3 player References: <20060113151945.29386.70764.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060411165030.32233.6834.malone@gandwana.ubuntu.com> I found at the FAQ at http://www.linux-usb.org/ that some BIOS are old and cannot handle good enough the USB2.0 ports. So the solution proposed is to turn off the support for USB2.0 from BIOS or upgrade the BIOS. In my case I had problems with latest windoze (before I turn to linux) and an update of the linux kernel about last november (not reading USB memory stick). I turned off the usb 2.0 support and my devices are working. However, at the usb view I see only USB 1.0 ports, but all devices I have work properly. I hope I helped. -- kernel does not detect usb 2.0 mp3 player https://launchpad.net/malone/bugs/27889 From sitsofe at yahoo.com Tue Apr 11 17:33:26 2006 From: sitsofe at yahoo.com (Sitsofe Wheeler) Date: Tue, 11 Apr 2006 17:33:26 -0000 Subject: [Bug 39160] Re: swsusp/hibernate started hanging recently References: <20060411162704.32233.18489.malonedeb@gandwana.ubuntu.com> Message-ID: <20060411173326.32233.38020.malone@gandwana.ubuntu.com> Are there any message on the screen during the suspend? -- swsusp/hibernate started hanging recently https://launchpad.net/malone/bugs/39160 From cjwatson at canonical.com Tue Apr 11 17:36:04 2006 From: cjwatson at canonical.com (Colin Watson) Date: Tue, 11 Apr 2006 17:36:04 -0000 Subject: [Bug 35635] Re: [Bug 35635] RE: [Bug 35635] Re: Halts on Boot after Installation References: <20060319201635.12254.13260.malonedeb@gandwana.ubuntu.com> <20060410134802.24516.69915.malone@gangotri.ubuntu.com> Message-ID: <20060411183241.GB3295@riva.ucam.org> http://cdimage.ubuntu.com/daily/current/ -- Halts on Boot after Installation https://launchpad.net/malone/bugs/35635 From sitsofe at yahoo.com Tue Apr 11 17:49:51 2006 From: sitsofe at yahoo.com (Sitsofe Wheeler) Date: Tue, 11 Apr 2006 17:49:51 -0000 Subject: [Bug 34781] Re: [Dapper] boot fails on HP Pavilion dv5000 References: <20060313160554.17044.88668.malonedeb@gangotri.ubuntu.com> Message-ID: <20060411174951.24486.78009.malone@gangotri.ubuntu.com> Although mildly risky, are there any BIOS updates for your machine? -- [Dapper] boot fails on HP Pavilion dv5000 https://launchpad.net/malone/bugs/34781 From shawn.coomey at cubist.com Tue Apr 11 17:51:57 2006 From: shawn.coomey at cubist.com (scoomey) Date: Tue, 11 Apr 2006 17:51:57 -0000 Subject: [Bug 34508] Re: 2.6.15 kernel fails to boot on ppc machine References: <20060311210305.30082.75520.malonedeb@gandwana.ubuntu.com> Message-ID: <20060411175157.24516.53561.malone@gangotri.ubuntu.com> Just did a dist-upgrade to Dapper Flight 6 from Breezy Badger. Same issue here on a Power Mac G4/933 "Quicksilver" machine. Hangs indefinitely "Loading Essential Drivers" or some such. My machine too is now toast. Any attempt at booting the original working kernel just dumps the machine to the BusyBox shell like Ben. -- 2.6.15 kernel fails to boot on ppc machine https://launchpad.net/malone/bugs/34508 From ian at snork.net Tue Apr 11 18:02:44 2006 From: ian at snork.net (Ian Chiew) Date: Tue, 11 Apr 2006 18:02:44 -0000 Subject: [Bug 30984] Re: (Dapper) kernel 2.6.15.15-686 breaks freq scaling on core duo References: <20060209172346.25235.19539.malonedeb@gangotri.ubuntu.com> Message-ID: <20060411180244.24486.72034.malone@gangotri.ubuntu.com> I have identical hardware and can verify that the boot-order problem does go away with kernel 2.6.15-20-686 on a stock installation of Dapper. The ignored-second-CPU problem is indeed a bug in powernowd. It's been fixed as of the latest upstream version (0.97). -- (Dapper) kernel 2.6.15.15-686 breaks freq scaling on core duo https://launchpad.net/malone/bugs/30984 From sworley13 at yahoo.com Tue Apr 11 18:10:42 2006 From: sworley13 at yahoo.com (scott worley) Date: Tue, 11 Apr 2006 18:10:42 -0000 Subject: [Bug 39067] Dapper Flight6 kernel hangs on install with usb hub attached References: <20060411000851.32313.91241.malonedeb@gandwana.ubuntu.com> Message-ID: <20060411181042.32313.76347.launchpad@canonical@gandwana.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: Attempt boot of Dapper Drake Flight 6 install CD. If D-Link DUB-H4 USB 2.0 Hub is plugged in, then install CD kernel will hang at: [4294674.556000] ohci1394: $Rev: 1313 $ Ben Collins [4294674.556000] ACPI: PCI Interrupt 0000:01:13.0[A] -> GSI 20 (level, low) -> IRQ 185 [4294674.582000] usbcore: registered new driver usbfs [4294674.582000] usbcore: registered new driver hub ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 193 [4294674.582000] ohci_hcd 0000:00:1c.0: OHCI Host Controller Also tried noapic, nolapci, and pci=noacpi kernel params. Hang occurs at the same place. Hub has worked on all other Linux & motherboards. Note: New motherboard/chipset/bios ASUS A8R32-MVP Deluxe ATI Crossfire Xpress 3200 (RD580 northbridge) ULi M1575 southbridge Athlon64 4200 x2 CPU 1GB RAM I know this bios is buggy because if I unplug USB hub the install finishes. But when I update the kernel to the next version, kernel crashes on next reboot with MP table error for IRQ0. The MPS spec is worse than the ACPI spec. Intel southbridges/motherboards usually map IRQ0 to one of the local APIC extint's whereas Nvidia/ATI map IRQ0 differently. I need to dump the MP tables and check how IRQ0 entry. Hopefully, ASUS will responde to a detailed description of the MP table bug. Note: the original reporter indicated the bug was in package 'kernel-image-2.6.15-19-386-di'; however, that package was not published in Ubuntu. Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: Attempt boot of Dapper Drake Flight 6 install CD. If D-Link DUB-H4 USB 2.0 Hub is plugged in, then install CD kernel will hang at: [4294674.556000] ohci1394: $Rev: 1313 $ Ben Collins [4294674.556000] ACPI: PCI Interrupt 0000:01:13.0[A] -> GSI 20 (level, low) -> IRQ 185 [4294674.582000] usbcore: registered new driver usbfs [4294674.582000] usbcore: registered new driver hub ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 193 [4294674.582000] ohci_hcd 0000:00:1c.0: OHCI Host Controller Also tried noapic, nolapci, and pci=noacpi kernel params. Hang occurs at the same place. Hub has worked on all other Linux & motherboards. Note: New motherboard/chipset/bios ASUS A8R32-MVP Deluxe ATI Crossfire Xpress 3200 (RD580 northbridge) ULi M1575 southbridge Athlon64 4200 x2 CPU 1GB RAM I know this bios is buggy because if I unplug USB hub the install finishes. But when I update the kernel to the next version, kernel crashes on next reboot with MP table error for IRQ0. The MPS spec is worse than the ACPI spec. Intel southbridges/motherboards usually map IRQ0 to one of the local APIC extint's whereas Nvidia/ATI map IRQ0 differently. I need to dump the MP tables and check how IRQ0 entry. Hopefully, ASUS will responde to a detailed description of the MP table bug. Note: the original reporter indicated the bug was in package 'kernel-image-2.6.15-19-386-di'; however, that package was not published in Ubuntu. -- Dapper Flight6 kernel hangs on install with usb hub attached https://launchpad.net/malone/bugs/39067 From sitsofe at yahoo.com Tue Apr 11 18:10:42 2006 From: sitsofe at yahoo.com (Sitsofe Wheeler) Date: Tue, 11 Apr 2006 18:10:42 -0000 Subject: [Bug 39067] Re: Dapper Flight6 kernel hangs on install with usb hub attached References: <20060411000851.32313.91241.malonedeb@gandwana.ubuntu.com> Message-ID: <20060411181042.32313.43862.launchpad@gandwana.ubuntu.com> ** Changed in: Ubuntu Sourcepackagename: None => linux-source-2.6.15 -- Dapper Flight6 kernel hangs on install with usb hub attached https://launchpad.net/malone/bugs/39067 From mail at carthik.net Tue Apr 11 18:34:52 2006 From: mail at carthik.net (Carthik Sharma) Date: Tue, 11 Apr 2006 18:34:52 -0000 Subject: [Bug 26893] Re: 2.6.15 kernel locks hard when downloading References: <20060113145150.21012.17412.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060411183452.32313.97370.malone@gandwana.ubuntu.com> Thank you for reporting this bug. Does this problem still exist when using the latest Dapper packages, and the latest kernel. Please let us know. If this is not so we can close this bug. -- 2.6.15 kernel locks hard when downloading https://launchpad.net/malone/bugs/26893 From mdz at ubuntu.com Tue Apr 11 18:47:25 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Tue, 11 Apr 2006 18:47:25 -0000 Subject: [Bug 36089] Re: After Kernel update (3/21/2006) no sound References: <20060323010921.24660.83604.malonedeb@gandwana.ubuntu.com> Message-ID: <20060411184725.24486.9244.malone@gangotri.ubuntu.com> Please attach dmesg output and amixer output ** Changed in: linux-source-2.6.15 linux-image-2.6.15-19-386 (Ubuntu) Status: Unconfirmed => Needs Info -- After Kernel update (3/21/2006) no sound https://launchpad.net/malone/bugs/36089 From apeeters at lashout.net Tue Apr 11 18:56:41 2006 From: apeeters at lashout.net (Adriaan Peeters) Date: Tue, 11 Apr 2006 18:56:41 -0000 Subject: [Bug 36119] external usb keyboard dead after suspend/resume References: <20060323090614.10163.64654.malonedeb@gangotri.ubuntu.com> Message-ID: <20060411185641.24516.96902.launchpad@canonical@gangotri.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: My usb keyboard is dead after a suspend/resume cycle with Dapper Flight 5. The usb mouse works, but I have to unplug and plug the keyboard to get it working again. Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: My usb keyboard is dead after a suspend/resume cycle with Dapper Flight 5. The usb mouse works, but I have to unplug and plug the keyboard to get it working again. -- external usb keyboard dead after suspend/resume https://launchpad.net/malone/bugs/36119 From mdz at ubuntu.com Tue Apr 11 18:53:16 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Tue, 11 Apr 2006 18:53:16 -0000 Subject: [Bug 36074] Re: Lack of /proc/bus/usb/devices breaks VMWare References: <20060322222355.10134.2529.malonedeb@gangotri.ubuntu.com> Message-ID: <20060411185316.32313.41892.malone@gandwana.ubuntu.com> Not a kernel issue; mountvirtfs seems to have stopped mounting this, though there's nothing in the changelog about it. ** Changed in: linux-source-2.6.15 (Ubuntu) Sourcepackagename: linux-source-2.6.15 => sysvinit Assignee: (unassigned) => Scott James Remnant ** Summary changed: - Lack of /proc/bus/usb/devices breaks VMWare + /proc/bus/usb no longer mounted? ** Description changed: - VMWare monitors /proc/bus/usb/devices to find USB devices and connect them into the child OS. It doesn't use sysfs or anything else, so the removal of the usbfs on /proc/bus/usb breaks the use of all USB devices in VMWare. + VMWare monitors /proc/bus/usb/devices to find USB devices and connect + them into the child OS. It doesn't use sysfs or anything else, so the + removal of the usbfs on /proc/bus/usb breaks the use of all USB devices + in VMWare. - Note: the original reporter indicated the bug was in package 'linux-image-2.6.15-18-686'; however, that package was not published in Ubuntu. + + Note: the original reporter indicated the bug was in package 'linux- + image-2.6.15-18-686'; however, that package was not published in Ubuntu. -- /proc/bus/usb no longer mounted? https://launchpad.net/malone/bugs/36074 From mdz at ubuntu.com Tue Apr 11 18:56:41 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Tue, 11 Apr 2006 18:56:41 -0000 Subject: [Bug 36119] Re: external usb keyboard dead after suspend/resume References: <20060323090614.10163.64654.malonedeb@gangotri.ubuntu.com> Message-ID: <20060411185641.24516.24659.launchpad@gangotri.ubuntu.com> ** Changed in: acpi-support (Ubuntu) Sourcepackagename: acpi-support => linux-source-2.6.15 -- external usb keyboard dead after suspend/resume https://launchpad.net/malone/bugs/36119 From mdz at ubuntu.com Tue Apr 11 19:00:32 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Tue, 11 Apr 2006 19:00:32 -0000 Subject: [Bug 36128] Re: Latest kernel upgrade doesn't boot on Acer Travelmate 8000 References: <20060323103500.18321.67319.malonedeb@gandwana.ubuntu.com> Message-ID: <20060411190033.24486.52214.launchpad@gangotri.ubuntu.com> ** Changed in: linux-source-2.6.15 kernel-image-2.6.15-19-386-di (Ubuntu) Severity: Normal => Major Status: Unconfirmed => Needs Info -- Latest kernel upgrade doesn't boot on Acer Travelmate 8000 https://launchpad.net/malone/bugs/36128 From toms at pinglebo.net Tue Apr 11 19:09:21 2006 From: toms at pinglebo.net (Tom Simonsen) Date: Tue, 11 Apr 2006 19:09:21 -0000 Subject: [Bug 6550] Re: Grub wont uncompress kernel image References: <20060108150918.15433.4157.malonedeb@gangotri.ubuntu.com> Message-ID: <20060411190921.24516.4679.malone@gangotri.ubuntu.com> *** This bug is a duplicate of bug 33939 *** Thanks for the tips. As there wasn't anything on the machine, I did an breezy install and upgraded to dapper. But I think I will try the rescue CD route just for kicks - it is handy for later emergencies. -- Grub wont uncompress kernel image https://launchpad.net/malone/bugs/6550 From scott at ubuntu.com Tue Apr 11 19:09:32 2006 From: scott at ubuntu.com (Scott James Remnant) Date: Tue, 11 Apr 2006 19:09:32 -0000 Subject: [Bug 36074] Re: /proc/bus/usb no longer mounted? References: <20060322222355.10134.2529.malonedeb@gangotri.ubuntu.com> Message-ID: <20060411190932.32313.49875.malone@gandwana.ubuntu.com> The problem is that /proc/bus/usb is entirely deprecated; and we have nothing that will change the permissions of this. The easiest thing I guess would be to bind-mount /dev/bus/usb over the top of it ** Changed in: sysvinit (Ubuntu) Sourcepackagename: sysvinit => udev -- /proc/bus/usb no longer mounted? https://launchpad.net/malone/bugs/36074 From scott at ubuntu.com Tue Apr 11 19:11:33 2006 From: scott at ubuntu.com (Scott James Remnant) Date: Tue, 11 Apr 2006 19:11:33 -0000 Subject: [Bug 36074] Re: /proc/bus/usb no longer mounted? References: <20060322222355.10134.2529.malonedeb@gangotri.ubuntu.com> Message-ID: <20060411191133.32233.76892.malone@gandwana.ubuntu.com> Is it not possible for vmware to use /dev/bus/usb instead? -- /proc/bus/usb no longer mounted? https://launchpad.net/malone/bugs/36074 From ivan.matveich at gmail.com Tue Apr 11 19:30:18 2006 From: ivan.matveich at gmail.com (Ivan Matveich) Date: Tue, 11 Apr 2006 19:30:18 -0000 Subject: [Bug 39185] M-Audio Delta 1010LT SPDIF output does not work. References: <20060411193018.32313.43105.malonedeb@gandwana.ubuntu.com> Message-ID: <20060411193018.32313.43105.malonedeb@gandwana.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: I can't get my Delta 1010LT to produce any SPDIF output. Seems to be a known bug: https://bugtrack.alsa-project.org/alsa-bug/view.php?id=1806 -- M-Audio Delta 1010LT SPDIF output does not work. https://launchpad.net/malone/bugs/39185 From ryanmbruce at gmail.com Tue Apr 11 19:42:44 2006 From: ryanmbruce at gmail.com (ryanmbruce) Date: Tue, 11 Apr 2006 19:42:44 -0000 Subject: [Bug 35492] Re: "Cannot enable port 1. Maybe the USB cable is bad?" with usb mouse on toshiba laptop References: <20060318190809.26236.8241.malonedeb@gangotri.ubuntu.com> Message-ID: <20060411194244.32313.85858.malone@gandwana.ubuntu.com> Sorry... a misplaced click linked this bug back to the hotplug package, and it shouldn't be. I don't know how/if I have permissions to unlink it. -- "Cannot enable port 1. Maybe the USB cable is bad?" with usb mouse on toshiba laptop https://launchpad.net/malone/bugs/35492 From greblus at wp.pl Tue Apr 11 19:57:56 2006 From: greblus at wp.pl (Wiktor Grebla) Date: Tue, 11 Apr 2006 19:57:56 -0000 Subject: [Bug 38884] Re: rtl818x - System hangs when uploading files. References: <20060409144601.32233.18688.malonedeb@gandwana.ubuntu.com> Message-ID: <20060411195756.32233.95855.malone@gandwana.ubuntu.com> To be a little more informative i've decided to take a look at diff -u config-2.6.15-20-386 config-2.6.15-20-k7. Luckily these configs don't differ that much, and my first notice was that the -k7 kernel has CONFIG_SMP=y. Package descripion says it's SMP/UP so it was not a big discovery :), however when i compile the kernel without smp support, it works. Here is my /proc/cpuinfo: processor : 0 vendor_id : AuthenticAMD cpu family : 6 model : 8 model name : AMD Athlon(tm) XP 2200+ stepping : 1 cpu MHz : 1797.438 cache size : 256 KB fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 1 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 mmx fxsr sse syscall mmxext 3dnowext 3dnow bogomips : 3597.11 -- rtl818x - System hangs when uploading files. https://launchpad.net/malone/bugs/38884 From stephane.tranchemer at devinci.fr Tue Apr 11 19:55:20 2006 From: stephane.tranchemer at devinci.fr (Corsaire01) Date: Tue, 11 Apr 2006 19:55:20 -0000 Subject: [Bug 36158] Re: System does not shutdown References: <20060323145229.5380.85426.malonedeb@gangotri.ubuntu.com> Message-ID: <20060411195520.24486.24785.malone@gangotri.ubuntu.com> Hi, I also have a hard time with power-off, I searched a bit in the launchpad and bug #31993 seems related too. The system goes to until the power off message, you can ear the hard drives being stopped, the screen goes dark, but power remains on motherboard. I have a Bi-Opteron system, and was using for a long time Fedora Core distros, the problem appears erraticly, the kernels that doesn't power-off my system are kernel 2.6.11, 2.6.12, 2.6.15 and 2.6.16. Ubuntu 6.06-flight6 is falty too. I strongly believe in a kernel flaw that triggers subtily at kernel releases, sometimes if works sometimes not (as you can see in the kernels numbers I said above). Since this happens at a moment the system does not give any command to the user, and no process can still berunning, there is no log nor evidence of the fail, so what can we do ? As I read the posts above I tried the acpi and runlevel 1 tests ... no success everything fails. I'll include my dmidecode output too. ** Attachment added: "Corsaire01's dmidecode output on Bi-Opteron system" http://librarian.launchpad.net/2044157/dmidecode.txt -- System does not shutdown https://launchpad.net/malone/bugs/36158 From joel.franco at gmail.com Tue Apr 11 20:12:35 2006 From: joel.franco at gmail.com (Joel Franco) Date: Tue, 11 Apr 2006 20:12:35 -0000 Subject: [Bug 19196] Re: Mysterious NFS mount timeouts References: <20060113140022.21012.71952.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060411201235.24516.21402.malone@gangotri.ubuntu.com> Hi All, I have "NFS not responding" and i have tried tcp,nfsvers=3,rsize and wsize stuffs but nothing have worked to me. However, i changed the autodetect connection of my GigaBit Switch (PowerConnect 5224) of the port in which the machine was in trouble to manual (100 Full Duplex) and all started to work perfect. The problem appears to be with the switch. I hope this help someone with the same problem. []s -- Mysterious NFS mount timeouts https://launchpad.net/malone/bugs/19196 From scott at ubuntu.com Tue Apr 11 20:15:06 2006 From: scott at ubuntu.com (Scott James Remnant) Date: Tue, 11 Apr 2006 20:15:06 -0000 Subject: [Bug 36074] Re: /proc/bus/usb no longer mounted? References: <20060322222355.10134.2529.malonedeb@gangotri.ubuntu.com> Message-ID: <20060411201506.24516.64354.launchpad@gangotri.ubuntu.com> ** Changed in: udev (Ubuntu) Sourcepackagename: udev => sysvinit Binarypackagename: None => initscripts Status: Unconfirmed => Confirmed -- /proc/bus/usb no longer mounted? https://launchpad.net/malone/bugs/36074 From phibxr at gmail.com Tue Apr 11 20:18:32 2006 From: phibxr at gmail.com (phibxr) Date: Tue, 11 Apr 2006 20:18:32 -0000 Subject: [Bug 34508] Re: 2.6.15 kernel fails to boot on ppc machine References: <20060311210305.30082.75520.malonedeb@gandwana.ubuntu.com> Message-ID: <20060411201832.24516.57981.malone@gangotri.ubuntu.com> I can't believe that this bug is still around. It has been fixed in Gentoo, seemingly, with the latest kernel version in 2006.0. -- 2.6.15 kernel fails to boot on ppc machine https://launchpad.net/malone/bugs/34508 From scott at ubuntu.com Tue Apr 11 20:43:37 2006 From: scott at ubuntu.com (Scott James Remnant) Date: Tue, 11 Apr 2006 20:43:37 -0000 Subject: [Bug 36074] Re: /proc/bus/usb no longer mounted? References: <20060322222355.10134.2529.malonedeb@gangotri.ubuntu.com> Message-ID: <20060411204337.24486.36735.malone@gangotri.ubuntu.com> /proc/bus/usb will be mounted in the meantime ** Changed in: sysvinit initscripts (Ubuntu) Status: Confirmed => Fix Released -- /proc/bus/usb no longer mounted? https://launchpad.net/malone/bugs/36074 From pvanhoof at gnome.org Tue Apr 11 20:57:28 2006 From: pvanhoof at gnome.org (Philip Van Hoof) Date: Tue, 11 Apr 2006 20:57:28 -0000 Subject: [Bug 36128] Re: Latest kernel upgrade doesn't boot on Acer Travelmate 8000 References: <20060323103500.18321.67319.malonedeb@gandwana.ubuntu.com> Message-ID: <20060411205728.32233.75264.malone@gandwana.ubuntu.com> After kernel upgrade 2.6.15-20-686, the problem vanished -- Latest kernel upgrade doesn't boot on Acer Travelmate 8000 https://launchpad.net/malone/bugs/36128 From acornejo at ieee.org Tue Apr 11 21:14:41 2006 From: acornejo at ieee.org (Alejandro Cornejo) Date: Tue, 11 Apr 2006 21:14:41 -0000 Subject: [Bug 38688] Re: unable to boot References: <20060408070420.32313.56814.malonedeb@gandwana.ubuntu.com> Message-ID: <20060411211442.24516.53896.malone@gangotri.ubuntu.com> That is exactly what happened, I never bothered waiting that long. The alert message is different though: ALERT! /dev/sda3 does not exist. Dropping to a shell! If I do ls -/dev/sd* I get this: /dev/sdd /dev/sdc /dev/sdb /dev/sda So it is right, there is no /dev/sda3. This is weird, it does seem to be udev related. What should i do now? -- unable to boot https://launchpad.net/malone/bugs/38688 From elehvantti at ungroup.net Tue Apr 11 21:12:09 2006 From: elehvantti at ungroup.net (Antti Koskinen) Date: Tue, 11 Apr 2006 21:12:09 -0000 Subject: [Bug 36583] Re: USB mouse causes boot hang on ASUS A6Km (AMD64) References: <20060325132146.20484.40329.malonedeb@gangotri.ubuntu.com> Message-ID: <20060411211210.32233.47148.malone@gandwana.ubuntu.com> It seems that only the initial BIOS release (202AS) works without USB problems. All the later BIOS releases have this annoying mouse bug and I'm not sure ASUS will ever bother to fix it. So I guess this bug can be marked as resolved? -- USB mouse causes boot hang on ASUS A6Km (AMD64) https://launchpad.net/malone/bugs/36583 From scott at ubuntu.com Tue Apr 11 21:41:51 2006 From: scott at ubuntu.com (Scott James Remnant) Date: Tue, 11 Apr 2006 21:41:51 -0000 Subject: [Bug 38688] Re: unable to boot References: <20060408070420.32313.56814.malonedeb@gandwana.ubuntu.com> Message-ID: <20060411214151.32233.68591.malone@gandwana.ubuntu.com> Ok, interesting. If you run "modprobe sd_mod" does /dev/sda3 appear? Could you provide the output of "cat /sys/class/scsi_device/*/type" -- unable to boot https://launchpad.net/malone/bugs/38688 From sitsofe at yahoo.com Tue Apr 11 21:45:38 2006 From: sitsofe at yahoo.com (Sitsofe Wheeler) Date: Tue, 11 Apr 2006 21:45:38 -0000 Subject: [Bug 38937] Re: Kernel being noisy at boottime References: <20060409223348.24516.87248.malonedeb@gangotri.ubuntu.com> Message-ID: <20060411214538.24486.76431.malone@gangotri.ubuntu.com> What is on hdd? Do the drives on hdc and hdd continue to work work? -- Kernel being noisy at boottime https://launchpad.net/malone/bugs/38937 From carvalho at excc.ex.ac.uk Tue Apr 11 21:45:21 2006 From: carvalho at excc.ex.ac.uk (alex) Date: Tue, 11 Apr 2006 21:45:21 -0000 Subject: [Bug 12214] Re: After shutdown, screen output disappears but laptop does not actually power off References: <20060113132420.21012.44035.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060411214521.32233.89694.malone@gandwana.ubuntu.com> I have the same problem with Breezy on a LG LS70 Express laptop. -- After shutdown, screen output disappears but laptop does not actually power off https://launchpad.net/malone/bugs/12214 From nacho.exr at gmail.com Tue Apr 11 21:50:13 2006 From: nacho.exr at gmail.com (=?utf-8?q?Ignacio_Lago_Font=C3=A1n?=) Date: Tue, 11 Apr 2006 21:50:13 -0000 Subject: [Bug 27421] Re: Logitech RX300 mouse extra-buttons without kernel events References: <20060113145426.21012.68118.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060411215013.24516.95754.malone@gangotri.ubuntu.com> evtest.log is empty when these buttons are pressed. -- Logitech RX300 mouse extra-buttons without kernel events https://launchpad.net/malone/bugs/27421 From hramrach at centrum.cz Tue Apr 11 22:01:13 2006 From: hramrach at centrum.cz (Michal Suchanek) Date: Tue, 11 Apr 2006 22:01:13 -0000 Subject: [Bug 38859] The boot CD does not work on Cyrix References: <20060409115532.32233.49614.malonedeb@gandwana.ubuntu.com> Message-ID: <20060411220113.32313.8684.launchpad@canonical@gandwana.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: I tried installing on my test system (some Intel VX/LX chipset, a Cyrix cpu, 64MB ram, Mitsumi 8x atapi cd-rom). I tried the option to check the CD which failed with a kernel panic. The option to install to disk failed with similar panic after language and keyboard layout selection. The panic is "exception in interrupt" or somesuch, and some functions like read_cdrom appear in the stack trace. Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: I tried installing on my test system (some Intel VX/LX chipset, a Cyrix cpu, 64MB ram, Mitsumi 8x atapi cd-rom). I tried the option to check the CD which failed with a kernel panic. The option to install to disk failed with similar panic after language and keyboard layout selection. The panic is "exception in interrupt" or somesuch, and some functions like read_cdrom appear in the stack trace. -- The boot CD does not work on Cyrix https://launchpad.net/malone/bugs/38859 From karvinen+launchpad at iki.fi Tue Apr 11 22:09:09 2006 From: karvinen+launchpad at iki.fi (Tero Karvinen) Date: Tue, 11 Apr 2006 22:09:09 -0000 Subject: [Bug 38856] Complete freeze on boot References: <20060409112318.32233.90923.malonedeb@gandwana.ubuntu.com> Message-ID: <20060411220909.32233.39534.launchpad@canonical@gandwana.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: To reproduce 1) Install Ubuntu Dapper Flight 6 to Acer Travelmate 3004WTMi, Intel Centrino 2) System:Administration:Software properties - Remove: CDROM + Add: Ubuntu 6.04 Security Updates (binary) Community maintained (universe) + Add: Ubuntu 6.04 "Dapper Drake" (binary) Community maintained (universe) Close 3) (Both updates are done on 2006-04-09) $ sudo apt-get update && apt-get upgrade $ sudo apt-get update && apt-get dist-upgrade 4) Click on the "you should reboot" icon on top right corner. What should happen: computer should boot normally What actually happens: After boot, complete freeze on "Starting Hardware abstraction layer hald" in the boot splash screen. All previous things on screen show "ok". The line is about 95% done. No keys do anything: caps lock, alt-ctrl-backspace, alt-ctrl-del, alt-ctrl-f1 (2,3,4...), mouse, quick power button click. Had to press power button for 10 s to shut down. 3004WTMi requires "noapic irqpoll" to boot, I checked that these options were still present in grub configuration. Additionally, also runlevel 1 is now broken: Tried booting to runlevel 1 with grub options "1". Stopped on "Sending all processes the TERM signal..." caps lock changes led status, holding tab creates disk action, can change to alt-ctrl-f1. After some waiting, more text was printed on vt1, eg: "Disabling IRQ #11". Still, there seems to be no way to get a prompt. Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: To reproduce 1) Install Ubuntu Dapper Flight 6 to Acer Travelmate 3004WTMi, Intel Centrino 2) System:Administration:Software properties - Remove: CDROM + Add: Ubuntu 6.04 Security Updates (binary) Community maintained (universe) + Add: Ubuntu 6.04 "Dapper Drake" (binary) Community maintained (universe) Close 3) (Both updates are done on 2006-04-09) $ sudo apt-get update && apt-get upgrade $ sudo apt-get update && apt-get dist-upgrade 4) Click on the "you should reboot" icon on top right corner. What should happen: computer should boot normally What actually happens: After boot, complete freeze on "Starting Hardware abstraction layer hald" in the boot splash screen. All previous things on screen show "ok". The line is about 95% done. No keys do anything: caps lock, alt-ctrl-backspace, alt-ctrl-del, alt-ctrl-f1 (2,3,4...), mouse, quick power button click. Had to press power button for 10 s to shut down. 3004WTMi requires "noapic irqpoll" to boot, I checked that these options were still present in grub configuration. Additionally, also runlevel 1 is now broken: Tried booting to runlevel 1 with grub options "1". Stopped on "Sending all processes the TERM signal..." caps lock changes led status, holding tab creates disk action, can change to alt-ctrl-f1. After some waiting, more text was printed on vt1, eg: "Disabling IRQ #11". Still, there seems to be no way to get a prompt. -- Complete freeze on boot https://launchpad.net/malone/bugs/38856 From sitsofe at yahoo.com Tue Apr 11 22:01:13 2006 From: sitsofe at yahoo.com (Sitsofe Wheeler) Date: Tue, 11 Apr 2006 22:01:13 -0000 Subject: [Bug 38859] Re: The boot CD does not work on Cyrix References: <20060409115532.32233.49614.malonedeb@gandwana.ubuntu.com> Message-ID: <20060411220113.32313.59612.malone@gandwana.ubuntu.com> Taking a guess at the correct source package. Michal: Can you indicate exactly which cyrix chip you have? ** Changed in: Ubuntu Sourcepackagename: None => linux-source-2.6.15 -- The boot CD does not work on Cyrix https://launchpad.net/malone/bugs/38859 From scottles at netsight.co.uk Tue Apr 11 22:11:19 2006 From: scottles at netsight.co.uk (Scott Hilleard) Date: Tue, 11 Apr 2006 22:11:19 -0000 Subject: [Bug 38767] 3com 3crusb10075 usb wifi dongle fails to work References: <20060408175749.32233.21634.malonedeb@gandwana.ubuntu.com> Message-ID: <20060411221119.32233.80193.launchpad@canonical@gandwana.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: In the i386 dapper drake flight5 release the 3crusb10075 usb wifi dongle was detected (showed up in network settings), but failed to connect to a wireless network (regardless of weather ip address was set to static or dhcp). The network is configured to use WEP encryption. With dapper drake flight 6 I tried the AMD64 release and noticed the usb wifi dongle was not detected at all. I tried doing "modprobe zd1211" to load the kernel module for the device and then doing an "ifconfig wlan0 up" to enable the device. Trying to bring the interface up causes the machine to lock up entirely, with no ability to switch to a virtual terminal or restart X Windows. Reading ubuntuforums.org, some people have suggested that the zd1211 driver included with dapper drake is over a year out of date, compared with the latest version of the driver and that newer versions work much better, notably with AMD64 machines. Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: In the i386 dapper drake flight5 release the 3crusb10075 usb wifi dongle was detected (showed up in network settings), but failed to connect to a wireless network (regardless of weather ip address was set to static or dhcp). The network is configured to use WEP encryption. With dapper drake flight 6 I tried the AMD64 release and noticed the usb wifi dongle was not detected at all. I tried doing "modprobe zd1211" to load the kernel module for the device and then doing an "ifconfig wlan0 up" to enable the device. Trying to bring the interface up causes the machine to lock up entirely, with no ability to switch to a virtual terminal or restart X Windows. Reading ubuntuforums.org, some people have suggested that the zd1211 driver included with dapper drake is over a year out of date, compared with the latest version of the driver and that newer versions work much better, notably with AMD64 machines. -- 3com 3crusb10075 usb wifi dongle fails to work https://launchpad.net/malone/bugs/38767 From prak23 at gmail.com Tue Apr 11 22:15:00 2006 From: prak23 at gmail.com (kpdawg) Date: Tue, 11 Apr 2006 22:15:00 -0000 Subject: [Bug 38802] dapper freezes on laptop References: <20060408234049.24516.71262.malonedeb@gangotri.ubuntu.com> Message-ID: <20060411221500.24486.45687.launchpad@canonical@gangotri.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: I upgraded from breezy to dapper a few weeks back. Most of the upgrade was smooth except for some hiccups with moving to pcmciautils when 2.6.15-x kernel came in... however, every once in a while, even as i am doing something on the laptop, everything freezes. keyboard events don't help, no ssh connection is possible, not even a ping. i basically would have to hard boot. praveen at ion:/var/log $ lspci 0000:00:00.0 Host bridge: Intel Corporation 82830 830 Chipset Host Bridge (rev 02) 0000:00:01.0 PCI bridge: Intel Corporation 82830 830 Chipset AGP Bridge (rev 02) 0000:00:1d.0 USB Controller: Intel Corporation 82801CA/CAM USB (Hub #1) (rev 01) 0000:00:1d.1 USB Controller: Intel Corporation 82801CA/CAM USB (Hub #2) (rev 01) 0000:00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 41) 0000:00:1f.0 ISA bridge: Intel Corporation 82801CAM ISA Bridge (LPC) (rev 01) 0000:00:1f.1 IDE interface: Intel Corporation 82801CAM IDE U100 (rev 01) 0000:00:1f.3 SMBus: Intel Corporation 82801CA/CAM SMBus Controller (rev 01) 0000:00:1f.5 Multimedia audio controller: Intel Corporation 82801CA/CAM AC'97 Audio Controller (rev 01) 0000:01:00.0 VGA compatible controller: ATI Technologies Inc Radeon Mobility M6 LY 0000:02:04.0 Communication controller: Conexant HSF 56k HSFi Modem (rev 01) 0000:02:05.0 FireWire (IEEE 1394): Texas Instruments TSB43AB22/A IEEE-1394a-2000 Controller (PHY/Link) 0000:02:06.0 CardBus bridge: Texas Instruments PCI1410 PC card Cardbus Controller (rev 01) 0000:02:08.0 Ethernet controller: Intel Corporation 82801CAM (ICH3) PRO/100 VE (LOM) Ethernet Controller (rev 41) praveen at ion:/var/log $ uname -a Linux ion 2.6.15-19-386 #1 PREEMPT Mon Mar 20 16:46:02 UTC 2006 i686 GNU/Linux praveen at ion:/var/log $ lsmod Module Size Used by radeon 108832 0 drm 72852 1 radeon speedstep_ich 5260 0 speedstep_lib 4484 1 speedstep_ich cpufreq_userspace 4696 1 cpufreq_stats 5636 0 freq_table 4740 2 speedstep_ich,cpufreq_stats cpufreq_powersave 1920 0 cpufreq_ondemand 6428 0 cpufreq_conservative 7332 0 video 16260 0 tc1100_wmi 6916 0 sony_acpi 5516 0 pcc_acpi 11136 0 hotkey 11556 0 dev_acpi 11140 0 container 4608 0 button 6672 0 acpi_sbs 19980 0 battery 9988 1 acpi_sbs ac 5252 1 acpi_sbs i2c_acpi_ec 5120 1 acpi_sbs i2c_core 21904 1 i2c_acpi_ec ipv6 265600 10 md_mod 72532 0 dm_mod 58936 1 parport_pc 35780 1 lp 11844 0 parport 36296 2 parport_pc,lp sbp2 24196 0 sr_mod 16932 0 scsi_mod 138984 2 sbp2,sr_mod af_packet 22920 4 hostap_cs 64536 0 hostap 119428 1 hostap_cs ieee80211_crypt 6272 1 hostap orinoco_cs 17928 1 orinoco 43156 1 orinoco_cs hermes 7808 2 orinoco_cs,orinoco snd_intel8x0 33436 0 snd_ac97_codec 92704 1 snd_intel8x0 snd_ac97_bus 2304 1 snd_ac97_codec snd_pcm_oss 53664 0 snd_mixer_oss 18688 1 snd_pcm_oss pcmcia 40508 2 hostap_cs,orinoco_cs snd_pcm 89736 3 snd_intel8x0,snd_ac97_codec,snd_pcm_oss snd_timer 25220 1 snd_pcm snd 55268 6 snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer soundcore 10208 1 snd snd_page_alloc 10632 2 snd_intel8x0,snd_pcm joydev 10048 0 tsdev 8000 0 yenta_socket 27916 3 rsrc_nonstatic 13440 1 yenta_socket pcmcia_core 42640 3 pcmcia,yenta_socket,rsrc_nonstatic ohci1394 35124 0 ieee1394 299832 2 sbp2,ohci1394 e100 40580 0 mii 5888 1 e100 psmouse 36100 0 serio_raw 7300 0 shpchp 45632 0 pci_hotplug 29236 1 shpchp intel_agp 22812 1 agpgart 34888 2 drm,intel_agp evdev 9856 2 ext3 135688 1 jbd 58772 1 ext3 ide_generic 1536 0 uhci_hcd 33680 0 usbcore 129668 2 uhci_hcd ide_cd 33028 0 cdrom 38560 2 sr_mod,ide_cd ide_disk 17664 3 piix 11012 1 generic 5124 0 thermal 13576 0 processor 23360 1 thermal fan 4868 0 capability 5000 0 commoncap 7296 1 capability vga16fb 13448 1 vgastate 10368 1 vga16fb fbcon 42784 72 tileblit 2816 1 fbcon font 8320 1 fbcon bitblit 6272 1 fbcon softcursor 2304 1 bitblit praveen at ion:/var/log $ Let me know if i need to provide any more info. Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: I upgraded from breezy to dapper a few weeks back. Most of the upgrade was smooth except for some hiccups with moving to pcmciautils when 2.6.15-x kernel came in... however, every once in a while, even as i am doing something on the laptop, everything freezes. keyboard events don't help, no ssh connection is possible, not even a ping. i basically would have to hard boot. praveen at ion:/var/log $ lspci 0000:00:00.0 Host bridge: Intel Corporation 82830 830 Chipset Host Bridge (rev 02) 0000:00:01.0 PCI bridge: Intel Corporation 82830 830 Chipset AGP Bridge (rev 02) 0000:00:1d.0 USB Controller: Intel Corporation 82801CA/CAM USB (Hub #1) (rev 01) 0000:00:1d.1 USB Controller: Intel Corporation 82801CA/CAM USB (Hub #2) (rev 01) 0000:00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 41) 0000:00:1f.0 ISA bridge: Intel Corporation 82801CAM ISA Bridge (LPC) (rev 01) 0000:00:1f.1 IDE interface: Intel Corporation 82801CAM IDE U100 (rev 01) 0000:00:1f.3 SMBus: Intel Corporation 82801CA/CAM SMBus Controller (rev 01) 0000:00:1f.5 Multimedia audio controller: Intel Corporation 82801CA/CAM AC'97 Audio Controller (rev 01) 0000:01:00.0 VGA compatible controller: ATI Technologies Inc Radeon Mobility M6 LY 0000:02:04.0 Communication controller: Conexant HSF 56k HSFi Modem (rev 01) 0000:02:05.0 FireWire (IEEE 1394): Texas Instruments TSB43AB22/A IEEE-1394a-2000 Controller (PHY/Link) 0000:02:06.0 CardBus bridge: Texas Instruments PCI1410 PC card Cardbus Controller (rev 01) 0000:02:08.0 Ethernet controller: Intel Corporation 82801CAM (ICH3) PRO/100 VE (LOM) Ethernet Controller (rev 41) praveen at ion:/var/log $ uname -a Linux ion 2.6.15-19-386 #1 PREEMPT Mon Mar 20 16:46:02 UTC 2006 i686 GNU/Linux praveen at ion:/var/log $ lsmod Module Size Used by radeon 108832 0 drm 72852 1 radeon speedstep_ich 5260 0 speedstep_lib 4484 1 speedstep_ich cpufreq_userspace 4696 1 cpufreq_stats 5636 0 freq_table 4740 2 speedstep_ich,cpufreq_stats cpufreq_powersave 1920 0 cpufreq_ondemand 6428 0 cpufreq_conservative 7332 0 video 16260 0 tc1100_wmi 6916 0 sony_acpi 5516 0 pcc_acpi 11136 0 hotkey 11556 0 dev_acpi 11140 0 container 4608 0 button 6672 0 acpi_sbs 19980 0 battery 9988 1 acpi_sbs ac 5252 1 acpi_sbs i2c_acpi_ec 5120 1 acpi_sbs i2c_core 21904 1 i2c_acpi_ec ipv6 265600 10 md_mod 72532 0 dm_mod 58936 1 parport_pc 35780 1 lp 11844 0 parport 36296 2 parport_pc,lp sbp2 24196 0 sr_mod 16932 0 scsi_mod 138984 2 sbp2,sr_mod af_packet 22920 4 hostap_cs 64536 0 hostap 119428 1 hostap_cs ieee80211_crypt 6272 1 hostap orinoco_cs 17928 1 orinoco 43156 1 orinoco_cs hermes 7808 2 orinoco_cs,orinoco snd_intel8x0 33436 0 snd_ac97_codec 92704 1 snd_intel8x0 snd_ac97_bus 2304 1 snd_ac97_codec snd_pcm_oss 53664 0 snd_mixer_oss 18688 1 snd_pcm_oss pcmcia 40508 2 hostap_cs,orinoco_cs snd_pcm 89736 3 snd_intel8x0,snd_ac97_codec,snd_pcm_oss snd_timer 25220 1 snd_pcm snd 55268 6 snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer soundcore 10208 1 snd snd_page_alloc 10632 2 snd_intel8x0,snd_pcm joydev 10048 0 tsdev 8000 0 yenta_socket 27916 3 rsrc_nonstatic 13440 1 yenta_socket pcmcia_core 42640 3 pcmcia,yenta_socket,rsrc_nonstatic ohci1394 35124 0 ieee1394 299832 2 sbp2,ohci1394 e100 40580 0 mii 5888 1 e100 psmouse 36100 0 serio_raw 7300 0 shpchp 45632 0 pci_hotplug 29236 1 shpchp intel_agp 22812 1 agpgart 34888 2 drm,intel_agp evdev 9856 2 ext3 135688 1 jbd 58772 1 ext3 ide_generic 1536 0 uhci_hcd 33680 0 usbcore 129668 2 uhci_hcd ide_cd 33028 0 cdrom 38560 2 sr_mod,ide_cd ide_disk 17664 3 piix 11012 1 generic 5124 0 thermal 13576 0 processor 23360 1 thermal fan 4868 0 capability 5000 0 commoncap 7296 1 capability vga16fb 13448 1 vgastate 10368 1 vga16fb fbcon 42784 72 tileblit 2816 1 fbcon font 8320 1 fbcon bitblit 6272 1 fbcon softcursor 2304 1 bitblit praveen at ion:/var/log $ Let me know if i need to provide any more info. -- dapper freezes on laptop https://launchpad.net/malone/bugs/38802 From sitsofe at yahoo.com Tue Apr 11 22:06:49 2006 From: sitsofe at yahoo.com (Sitsofe Wheeler) Date: Tue, 11 Apr 2006 22:06:49 -0000 Subject: [Bug 38856] Re: Complete freeze on boot References: <20060409112318.32233.90923.malonedeb@gandwana.ubuntu.com> Message-ID: <20060411220649.32233.74339.malone@gandwana.ubuntu.com> Are there are lot warning messages related to irq3 when you run dmesg ? If so, post a small five line snippet. -- Complete freeze on boot https://launchpad.net/malone/bugs/38856 From sitsofe at yahoo.com Tue Apr 11 22:09:09 2006 From: sitsofe at yahoo.com (Sitsofe Wheeler) Date: Tue, 11 Apr 2006 22:09:09 -0000 Subject: [Bug 38856] Re: Complete freeze on boot References: <20060409112318.32233.90923.malonedeb@gandwana.ubuntu.com> Message-ID: <20060411220909.32233.9489.malone@gandwana.ubuntu.com> Guessing source package because total (caps lock stops working) lockups shouldn't be possible from user land programs... ** Changed in: hal (Ubuntu) Sourcepackagename: hal => linux-source-2.6.15 -- Complete freeze on boot https://launchpad.net/malone/bugs/38856 From sitsofe at yahoo.com Tue Apr 11 22:14:59 2006 From: sitsofe at yahoo.com (Sitsofe Wheeler) Date: Tue, 11 Apr 2006 22:14:59 -0000 Subject: [Bug 38802] Re: dapper freezes on laptop References: <20060408234049.24516.71262.malonedeb@gangotri.ubuntu.com> Message-ID: <20060411221459.24486.54196.malone@gangotri.ubuntu.com> Keyboard and network lockup sound kernel related... ** Changed in: Ubuntu Sourcepackagename: None => linux-source-2.6.15 -- dapper freezes on laptop https://launchpad.net/malone/bugs/38802 From sitsofe at yahoo.com Tue Apr 11 22:11:18 2006 From: sitsofe at yahoo.com (Sitsofe Wheeler) Date: Tue, 11 Apr 2006 22:11:18 -0000 Subject: [Bug 38767] Re: 3com 3crusb10075 usb wifi dongle fails to work References: <20060408175749.32233.21634.malonedeb@gandwana.ubuntu.com> Message-ID: <20060411221119.32233.42977.malone@gandwana.ubuntu.com> Punting based on comments to the linux-source... ** Changed in: Ubuntu Sourcepackagename: None => linux-source-2.6.15 -- 3com 3crusb10075 usb wifi dongle fails to work https://launchpad.net/malone/bugs/38767 From sitsofe at yahoo.com Tue Apr 11 22:17:13 2006 From: sitsofe at yahoo.com (Sitsofe Wheeler) Date: Tue, 11 Apr 2006 22:17:13 -0000 Subject: [Bug 38766] Re: [bcm43xx] Wireless not properly detected. References: <20060408175151.24516.78847.malonedeb@gangotri.ubuntu.com> Message-ID: <20060411221713.24486.78471.malone@gangotri.ubuntu.com> susancragin: Thank you for attaching the files. You do not appear to be using ndiswrapper on your wifi card. Instead you appear to be using the bcm43xx drivers. I shall chance the product this is filed against... -- [bcm43xx] Wireless not properly detected. https://launchpad.net/malone/bugs/38766 From sitsofe at yahoo.com Tue Apr 11 22:17:54 2006 From: sitsofe at yahoo.com (Sitsofe Wheeler) Date: Tue, 11 Apr 2006 22:17:54 -0000 Subject: [Bug 38766] Re: [bcm43xx] Wireless not properly detected. References: <20060408175151.24516.78847.malonedeb@gangotri.ubuntu.com> Message-ID: <20060411221754.24486.75542.malone@gangotri.ubuntu.com> Punting from ndiswrapper source package -> linux-source-2.6.15 based on dmesg output. ** Changed in: ndiswrapper (Ubuntu) Sourcepackagename: ndiswrapper => linux-source-2.6.15 -- [bcm43xx] Wireless not properly detected. https://launchpad.net/malone/bugs/38766 From sitsofe at yahoo.com Tue Apr 11 22:20:25 2006 From: sitsofe at yahoo.com (Sitsofe Wheeler) Date: Tue, 11 Apr 2006 22:20:25 -0000 Subject: [Bug 38767] Re: 3com 3crusb10075 usb wifi dongle fails to work References: <20060408175749.32233.21634.malonedeb@gandwana.ubuntu.com> Message-ID: <20060411222026.32233.81531.malone@gandwana.ubuntu.com> Hmm, perhaps the zd1211 source package would have been a better choice... Apologies if linux-source-2.6.15 was the wrong package... -- 3com 3crusb10075 usb wifi dongle fails to work https://launchpad.net/malone/bugs/38767 From sitsofe at yahoo.com Tue Apr 11 22:21:15 2006 From: sitsofe at yahoo.com (Sitsofe Wheeler) Date: Tue, 11 Apr 2006 22:21:15 -0000 Subject: [Bug 38767] Re: 3com 3crusb10075 usb wifi dongle fails to work References: <20060408175749.32233.21634.malonedeb@gandwana.ubuntu.com> Message-ID: <20060411222115.24516.90892.malone@gangotri.ubuntu.com> Might be related to Bug #37795 -- 3com 3crusb10075 usb wifi dongle fails to work https://launchpad.net/malone/bugs/38767 From alf at lervag.net Tue Apr 11 22:26:39 2006 From: alf at lervag.net (=?utf-8?q?Alf_Lerv=C3=A5g?=) Date: Tue, 11 Apr 2006 22:26:39 -0000 Subject: [Bug 32123] Re: Cannot find ide hard disk on boot References: <20060220130413.1427.33476.malonedeb@gangotri.ubuntu.com> Message-ID: <20060411222639.32313.47636.malone@gandwana.ubuntu.com> Same happened with me, dist-upgrade from breezy to dapper. My fix: wait until busybox drops you to a shell (takes a little while). modprobe ide-disk; modprobe ide-generic; cat /sys/block/hda/dev; mknod /dev/hda1 b 3 1;C-d # And then I watch as my system continues boot. My root filesystem is on hda1 as you might've guessed. cat /sys/block/hda/dev returns the major and minor numbers of hda on your system (3:0). After this I can use the tips above to make a new and working initrd.img. -- Cannot find ide hard disk on boot https://launchpad.net/malone/bugs/32123 From mdz at ubuntu.com Tue Apr 11 23:25:45 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Tue, 11 Apr 2006 23:25:45 -0000 Subject: [Bug 36158] Re: System does not shutdown References: <20060323145229.5380.85426.malonedeb@gangotri.ubuntu.com> Message-ID: <20060411232545.24516.79660.malone@gangotri.ubuntu.com> Does a trace (https://wiki.ubuntu.com/DebuggingSystemCrash) reveal anything of interest? ** Changed in: linux-source-2.6.15 linux-image-2.6.15-19-686 (Ubuntu) Status: Unconfirmed => Needs Info -- System does not shutdown https://launchpad.net/malone/bugs/36158 From mdz at ubuntu.com Tue Apr 11 23:26:19 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Tue, 11 Apr 2006 23:26:19 -0000 Subject: [Bug 36173] Re: oopses somewhere in radeon References: <20060323163409.5352.91915.malonedeb@gangotri.ubuntu.com> Message-ID: <20060411232620.32233.46428.launchpad@gandwana.ubuntu.com> ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Unconfirmed => Needs Info -- oopses somewhere in radeon https://launchpad.net/malone/bugs/36173 From agd5f at yahoo.com Tue Apr 11 23:52:01 2006 From: agd5f at yahoo.com (agd5f) Date: Tue, 11 Apr 2006 23:52:01 -0000 Subject: [Bug 36345] speedstep won't load on ThinkPad T20 and s30 (mobile coppermine Pentium 3) References: <20060324063345.5380.9894.malonedeb@gangotri.ubuntu.com> Message-ID: <20060411235201.32313.29185.launchpad@canonical@gandwana.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: As per the instructions on https://launchpad.net/distros/ubuntu/+source/powernowd/+bug/10813 I've added a new bug since speedstep_smi fails to load on my laptops. I'm running Dapper updated as of 20060323. speedstep_smi fails to load on both my Thinkpad T20 and my Thinkpad s30. When I try to load speedstep_smi I get: FATAL: Error inserting speedstep_smi (/lib/modules/2.6.15-19-386/kernel/arch/i386/kernel/cpu/cpufreq /speedstep-smi.ko): No such device The error is the same even when I load speedstep_lib with relaxed_check=1 and try modprobe speedstep-smi smi_port=0xb2 smi_cmd=0x82 smi_sig=1 Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: As per the instructions on https://launchpad.net/distros/ubuntu/+source/powernowd/+bug/10813 I've added a new bug since speedstep_smi fails to load on my laptops. I'm running Dapper updated as of 20060323. speedstep_smi fails to load on both my Thinkpad T20 and my Thinkpad s30. When I try to load speedstep_smi I get: FATAL: Error inserting speedstep_smi (/lib/modules/2.6.15-19-386/kernel/arch/i386/kernel/cpu/cpufreq /speedstep-smi.ko): No such device The error is the same even when I load speedstep_lib with relaxed_check=1 and try modprobe speedstep-smi smi_port=0xb2 smi_cmd=0x82 smi_sig=1 -- speedstep won't load on ThinkPad T20 and s30 (mobile coppermine Pentium 3) https://launchpad.net/malone/bugs/36345 From mdz at ubuntu.com Tue Apr 11 23:52:01 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Tue, 11 Apr 2006 23:52:01 -0000 Subject: [Bug 36345] Re: speedstep won't load on ThinkPad T20 and s30 (mobile coppermine Pentium 3) References: <20060324063345.5380.9894.malonedeb@gangotri.ubuntu.com> Message-ID: <20060411235201.32313.65950.malone@gandwana.ubuntu.com> Assuming the correct driver is being chosen, this is a kernel issue and not a powernowd one ** Changed in: powernowd (Ubuntu) Sourcepackagename: powernowd => linux-source-2.6.15 -- speedstep won't load on ThinkPad T20 and s30 (mobile coppermine Pentium 3) https://launchpad.net/malone/bugs/36345 From mdz at ubuntu.com Tue Apr 11 23:57:03 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Tue, 11 Apr 2006 23:57:03 -0000 Subject: [Bug 36339] Re: USB mouse does not work if usbhid loaded before plugging in References: <20060324035730.5352.52525.malonedeb@gangotri.ubuntu.com> Message-ID: <20060411235704.24486.94007.launchpad@gangotri.ubuntu.com> ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Unconfirmed => Confirmed -- USB mouse does not work if usbhid loaded before plugging in https://launchpad.net/malone/bugs/36339 From ubuntu at paul.sladen.org Wed Apr 12 00:02:50 2006 From: ubuntu at paul.sladen.org (Paul Sladen) Date: Wed, 12 Apr 2006 00:02:50 -0000 Subject: [Bug 36345] Re: speedstep won't load on ThinkPad T20 and s30 (mobile coppermine Pentium 3) References: <20060324063345.5380.9894.malonedeb@gangotri.ubuntu.com> Message-ID: <20060412000250.32233.31887.malone@gandwana.ubuntu.com> agd5f: did your testing get anywhere? And if so, what method did you use and did it cause any side-affects (eg. clock running at the wrong speed?). -- speedstep won't load on ThinkPad T20 and s30 (mobile coppermine Pentium 3) https://launchpad.net/malone/bugs/36345 From mdz at ubuntu.com Wed Apr 12 00:00:37 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Wed, 12 Apr 2006 00:00:37 -0000 Subject: [Bug 36322] Re: No firmware for mrv8k References: <20060323231357.18295.12928.malonedeb@gandwana.ubuntu.com> Message-ID: <20060412000037.32313.24437.malone@gandwana.ubuntu.com> Unfortunately, according to /usr/share/doc/linux-doc-2.6.15/Documentation/networking/mrv8k.txt.gz the firmware is only available by extracting it from the Windows driver, which we cannot redistribute ** Summary changed: - module 'mrv8k' doesn't load + No firmware for mrv8k ** Changed in: linux-source-2.6.15 (Ubuntu) Severity: Normal => Wishlist Status: Unconfirmed => Confirmed -- No firmware for mrv8k https://launchpad.net/malone/bugs/36322 From mdz at ubuntu.com Wed Apr 12 00:10:35 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Wed, 12 Apr 2006 00:10:35 -0000 Subject: [Bug 36403] Re: suspend hangs ipw2200 References: <20060324110342.4831.93832.malonedeb@gandwana.ubuntu.com> Message-ID: <20060412001035.32233.60016.malone@gandwana.ubuntu.com> The current acpi-support in Dapper doesn't remove ipw2200 on suspend; please try to reconfirm this bug with current Dapper ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Unconfirmed => Needs Info -- suspend hangs ipw2200 https://launchpad.net/malone/bugs/36403 From mdz at ubuntu.com Wed Apr 12 00:37:20 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Wed, 12 Apr 2006 00:37:20 -0000 Subject: [Bug 36499] Re: modem driver missing for old powerbook References: <20060324223129.6253.79337.malonedeb@gandwana.ubuntu.com> Message-ID: <20060412003720.32233.1402.malone@gandwana.ubuntu.com> If you're saying that the option has been disabled, that's easy to fix, but if the driver has been removed upstream, we're unlikely to take over maintenance of it ourselves ** Changed in: linux-meta linux-image-2.6-powerpc (Ubuntu) Sourcepackagename: linux-meta => linux-source-2.6.15 Binarypackagename: linux-image-2.6-powerpc => None -- modem driver missing for old powerbook https://launchpad.net/malone/bugs/36499 From mdz at ubuntu.com Wed Apr 12 00:40:41 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Wed, 12 Apr 2006 00:40:41 -0000 Subject: [Bug 36486] Re: very choppy sound on heavy disc access References: <20060324210315.20484.40352.malonedeb@gangotri.ubuntu.com> Message-ID: <20060412004041.32233.84706.launchpad@gandwana.ubuntu.com> ** Changed in: linux-meta linux (Ubuntu) Sourcepackagename: linux-meta => None Binarypackagename: linux => None -- very choppy sound on heavy disc access https://launchpad.net/malone/bugs/36486 From mdz at ubuntu.com Wed Apr 12 00:52:33 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Wed, 12 Apr 2006 00:52:33 -0000 Subject: [Bug 36525] Re: bcm43xx Driver only works @ 11Mb/s References: <20060325040432.6253.74364.malonedeb@gandwana.ubuntu.com> Message-ID: <20060412005233.32233.49943.launchpad@gandwana.ubuntu.com> ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Unconfirmed => Confirmed -- bcm43xx Driver only works @ 11Mb/s https://launchpad.net/malone/bugs/36525 From mdz at ubuntu.com Wed Apr 12 00:54:04 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Wed, 12 Apr 2006 00:54:04 -0000 Subject: [Bug 36510] Re: ALSA Audigy 2 NX sound mixing problem References: <20060324235832.20484.67345.malonedeb@gangotri.ubuntu.com> Message-ID: <20060412005404.32233.69309.malone@gandwana.ubuntu.com> We need more detail than "is not working correctly". Tell us exactly what you have observed. If you aren't sure what information is relevant, the guide at http://www.chiark.greenend.org.uk/~sgtatham/bugs.html may help. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Unconfirmed => Needs Info -- ALSA Audigy 2 NX sound mixing problem https://launchpad.net/malone/bugs/36510 From mdz at ubuntu.com Wed Apr 12 00:56:47 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Wed, 12 Apr 2006 00:56:47 -0000 Subject: [Bug 36619] Re: usb-mass storage disk isn't recognized the right way References: <20060325183618.6253.2445.malonedeb@gandwana.ubuntu.com> Message-ID: <20060412005647.32233.62719.launchpad@gandwana.ubuntu.com> ** Changed in: linux-meta linux-686 (Ubuntu) Sourcepackagename: linux-meta => linux-source-2.6.15 Binarypackagename: linux-686 => None Assignee: (unassigned) => Ben Collins -- usb-mass storage disk isn't recognized the right way https://launchpad.net/malone/bugs/36619 From mdz at ubuntu.com Wed Apr 12 01:00:45 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Wed, 12 Apr 2006 01:00:45 -0000 Subject: [Bug 36583] Re: USB mouse causes boot hang on ASUS A6Km (AMD64) References: <20060325132146.20484.40329.malonedeb@gangotri.ubuntu.com> Message-ID: <20060412010046.24486.3002.malone@gangotri.ubuntu.com> Since this is a BIOS bug, there isn't much to be done about it in Ubuntu. Upstream is aware of the problem. ** Bug watch added: Linux Kernel Bug Tracker #6208 http://bugzilla.kernel.org//show_bug.cgi?id=6208 ** Also affects: linux (upstream) via http://bugzilla.kernel.org//show_bug.cgi?id=6208 Severity: Unknown Priority: Unknown Status: Unknown ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Unconfirmed => Rejected -- USB mouse causes boot hang on ASUS A6Km (AMD64) https://launchpad.net/malone/bugs/36583 From mail at carthik.net Wed Apr 12 01:05:01 2006 From: mail at carthik.net (Carthik Sharma) Date: Wed, 12 Apr 2006 01:05:01 -0000 Subject: [Bug 11665] Re: 3c59x broken with acpi=on References: <20060113132121.21012.4445.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060412010501.24486.55578.malone@gangotri.ubuntu.com> Thank you for reporting this bug and following up on it. I am marking this bug Closed since there has been no response from you for over three months. We would like to fix all existing issues, but need users to test and help with debugging. Should you still have a problem with the Latest up to date Dapper kernel and packages, please reopen this bug, answering the questions that have already been asked of you before. Thanks again, please report any other issues you have after checking that they haven't already been reported. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Needs Info => Rejected -- 3c59x broken with acpi=on https://launchpad.net/malone/bugs/11665 From mail at carthik.net Wed Apr 12 01:01:43 2006 From: mail at carthik.net (Carthik Sharma) Date: Wed, 12 Apr 2006 01:01:43 -0000 Subject: [Bug 11134] Re: No sound from kmid References: <20060113131830.21012.32071.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060412010143.32313.36148.malone@gandwana.ubuntu.com> Thank you for reporting this bug and following up on it. I am marking this bug Closed since there has been no response from you for over three months. Should you still have a problem with the Latest up to date Dapper kernel and packages, please reopen this bug, answering the questions that have already been asked of you before. Thanks again, please report any other issues you have after checking that they haven't already been reported. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Needs Info => Rejected -- No sound from kmid https://launchpad.net/malone/bugs/11134 From viriiguy at gmail.com Wed Apr 12 01:10:21 2006 From: viriiguy at gmail.com (ViriiGuy) Date: Wed, 12 Apr 2006 01:10:21 -0000 Subject: [Bug 37765] Re: [bcm43xx] No matter what it simply will not connect. It scan and sees the networks, but it cannot connect. References: <20060402194212.5415.86136.malonedeb@gangotri.ubuntu.com> Message-ID: <20060412011021.24516.91474.malone@gangotri.ubuntu.com> Ok Ben, I updated and tried again. Much MUCH closer!!!! It actually connected to a MAC address secured only wireless network. I have not tried other configs yet, I will tomorrow. But it still does not get online. It is able to connect, but it reports a 0% connection and still no IP. I am 3 foot from the router, and have and excellent signal for at least another 200 foot diameter in windows. Below I have my dmesg, ifconfig and iwconfig readouts. dmesg [4295418.654000] SoftMAC: Open Authentication completed with 00:blah:blah:blah ifconfig eth0 Link encap:Ethernet HWaddr 00:90:96:AD:A9:F2 inet addr:169.254.182.211 Bcast:169.254.255.255 Mask:255.255.0.0 inet6 addr: fe80::290:96ff:fead:a9f2/64 Scope:Link UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:17 errors:0 dropped:99 overruns:0 frame:0 TX packets:174 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:4613 (4.5 KiB) TX bytes:7305 (7.1 KiB) Interrupt:9 Base address:0xc000 iwconfig eth0 IEEE 802.11b/g ESSID:off/any Nickname:"Broadcom 4306" Mode:Managed Frequency=2.484 GHz Access Point: Invalid Bit Rate=11 Mb/s Tx-Power=15 dBm RTS thr:off Fragment thr:off I am not sure what you changed, but it almost worked!!! Please keep up the good work and cut my cable :D Randy -- [bcm43xx] No matter what it simply will not connect. It scan and sees the networks, but it cannot connect. https://launchpad.net/malone/bugs/37765 From matt.andruff at gmail.com Wed Apr 12 01:12:35 2006 From: matt.andruff at gmail.com (trubblelmaker) Date: Wed, 12 Apr 2006 01:12:35 -0000 Subject: [Bug 36525] Re: bcm43xx Driver only works @ 11Mb/s References: <20060325040432.6253.74364.malonedeb@gandwana.ubuntu.com> Message-ID: <20060412011235.24516.95828.malone@gangotri.ubuntu.com> I'll give the static config a shot, won't work for me at school but I let you know how it goes at home. -- bcm43xx Driver only works @ 11Mb/s https://launchpad.net/malone/bugs/36525 From ubuntu-bugs at nullinfinity.org Wed Apr 12 01:28:33 2006 From: ubuntu-bugs at nullinfinity.org (Johan Brannlund) Date: Wed, 12 Apr 2006 01:28:33 -0000 Subject: [Bug 39237] Resuming from hibernation fails References: <20060412012833.32233.60531.malonedeb@gandwana.ubuntu.com> Message-ID: <20060412012833.32233.60531.malonedeb@gandwana.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: I just tried hibernating with the new 2.6.15-20-amd64-k8 kernel. Hibernation itself works, but resuming fails - the kernel is not able to resume from the saved image and instead boots normally. The relevant syslog fragment is attached. I'm not yet sure if this occurs every time or only occasionally, I'll give it a few more tries and add a new comment with my findings. ** Attachment added: "Syslog from resume attempt" http://librarian.launchpad.net/2046897/syslog -- Resuming from hibernation fails https://launchpad.net/malone/bugs/39237 From agd5f at yahoo.com Wed Apr 12 01:45:11 2006 From: agd5f at yahoo.com (agd5f) Date: Wed, 12 Apr 2006 01:45:11 -0000 Subject: [Bug 36345] Re: speedstep won't load on ThinkPad T20 and s30 (mobile coppermine Pentium 3) References: <20060324063345.5380.9894.malonedeb@gangotri.ubuntu.com> Message-ID: <20060412014512.32313.42125.malone@gandwana.ubuntu.com> sorry, I haven't gotten a chance to build a new kernel. Do you know off hand if CONFIG_CPU_FREQ_DEBUG if set in the dapper kernels? -- speedstep won't load on ThinkPad T20 and s30 (mobile coppermine Pentium 3) https://launchpad.net/malone/bugs/36345 From mdz at ubuntu.com Wed Apr 12 01:52:16 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Wed, 12 Apr 2006 01:52:16 -0000 Subject: [Bug 36673] Re: Can't Compile Kernele References: <20060326042518.6253.77920.malonedeb@gandwana.ubuntu.com> Message-ID: <20060412015216.24486.4053.malone@gangotri.ubuntu.com> The source in the archive definitely builds; the .debs were produced from it in a clean build environment ** Changed in: linux-meta linux-image-2.6-k7 (Ubuntu) Sourcepackagename: linux-meta => None Binarypackagename: linux-image-2.6-k7 => None -- Can't Compile Kernele https://launchpad.net/malone/bugs/36673 From mail at carthik.net Wed Apr 12 02:04:28 2006 From: mail at carthik.net (Carthik Sharma) Date: Wed, 12 Apr 2006 02:04:28 -0000 Subject: [Bug 15221] Re: cdrecord, gnomebaker, nautilus burner fail References: <20060113134106.21012.80387.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060412020428.32233.18480.malone@gandwana.ubuntu.com> Thank you for reporting this bug and following up on it. I am marking this bug Closed since there has been no response from you for over three months. We would like to fix all existing issues, but need need feedback to help with debugging. Should you still have a problem with the latest up to date Dapper kernel and packages, please reopen this bug, answering the questions that have already been asked of you before. Thanks again, please report any other issues you have after checking that they haven't already been reported. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Needs Info => Rejected -- cdrecord, gnomebaker, nautilus burner fail https://launchpad.net/malone/bugs/15221 From mail at carthik.net Wed Apr 12 02:03:18 2006 From: mail at carthik.net (Carthik Sharma) Date: Wed, 12 Apr 2006 02:03:18 -0000 Subject: [Bug 14480] Re: saa7134 module audio scan fails and uses the wrong(?) default References: <20060113133659.21012.50423.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060412020318.24516.59856.malone@gangotri.ubuntu.com> Thank you for reporting this bug and following up on it. I am marking this bug Closed since there has been no response from you for over three months. We would like to fix all existing issues, but need need feedback to help with debugging. Should you still have a problem with the latest up to date Dapper kernel and packages, please reopen this bug, answering the questions that have already been asked of you before. Thanks again, please report any other issues you have after checking that they haven't already been reported. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Needs Info => Rejected -- saa7134 module audio scan fails and uses the wrong(?) default https://launchpad.net/malone/bugs/14480 From mail at carthik.net Wed Apr 12 02:07:55 2006 From: mail at carthik.net (Carthik Sharma) Date: Wed, 12 Apr 2006 02:07:55 -0000 Subject: [Bug 16163] Re: Missing power events on nondescript Sony laptop? References: <20060113134505.21012.24613.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060412020755.32233.27872.malone@gandwana.ubuntu.com> Hi Brice, Sorry for the delay in the response to your question :) http://cdimage.ubuntu.com/releases/dapper/flight-6/ is where you can find the latest Dapper testing CDs. A fresh install and test would be cool. If not, you can dist-upgrade to Dapper and test this bug. As an alternative, you can try using the Live CD. Thank you for reporting this bug, and following up on it. -- Missing power events on nondescript Sony laptop? https://launchpad.net/malone/bugs/16163 From karvinen+launchpad at iki.fi Wed Apr 12 02:13:43 2006 From: karvinen+launchpad at iki.fi (Tero Karvinen) Date: Wed, 12 Apr 2006 02:13:43 -0000 Subject: [Bug 38856] Re: Complete freeze on boot References: <20060409112318.32233.90923.malonedeb@gandwana.ubuntu.com> Message-ID: <20060412021343.24516.50285.malone@gangotri.ubuntu.com> I have a lot of IRQ related warnings in dmesg. I can't run dmesg after complete freeze. I had to install the system again from CD to use it. Now I have Dapper Flight 6 and $ uname -r 2.6.15-19-386 $ dpkg --list hal|grep hal ii hal 0.5.7-1ubuntu10 Hardware Abstraction Layer $ cat /boot/grub/menu.lst|grep $(uname -r)|grep -v single|grep ^kernel kernel /boot/vmlinuz-2.6.15-19-386 root=/dev/hda3 ro quiet splash noapic irqpoll ** Attachment added: "dmesg on 3004WTMi with IRQ warnings" http://librarian.launchpad.net/2046925/dmesg-3004wtmi-irq-2006-04-12.txt -- Complete freeze on boot https://launchpad.net/malone/bugs/38856 From bgatchell at verizon.net Wed Apr 12 02:15:54 2006 From: bgatchell at verizon.net (WILLIAM) Date: Wed, 12 Apr 2006 02:15:54 -0000 Subject: [Bug 36599] Re: Install Hangs on "Hotplug" References: <20060325154214.6253.7673.malonedeb@gandwana.ubuntu.com> Message-ID: <20060412021554.32233.44756.malone@gandwana.ubuntu.com> I downloaded Ubuntu 6.006 Dapper Drake, and it installed perfectly. I now have Ubuntu on my computer. Thank-You, Bill -- Install Hangs on "Hotplug" https://launchpad.net/malone/bugs/36599 From scott at ubuntu.com Wed Apr 12 02:26:19 2006 From: scott at ubuntu.com (Scott James Remnant) Date: Wed, 12 Apr 2006 02:26:19 -0000 Subject: [Bug 36599] Re: Install Hangs on "Hotplug" References: <20060325154214.6253.7673.malonedeb@gandwana.ubuntu.com> Message-ID: <20060412022619.32233.23444.launchpad@gandwana.ubuntu.com> ** Changed in: linux-source-2.6.12 (Ubuntu) Status: Needs Info => Fix Released -- Install Hangs on "Hotplug" https://launchpad.net/malone/bugs/36599 From ubuntu at paul.sladen.org Wed Apr 12 02:26:24 2006 From: ubuntu at paul.sladen.org (Paul Sladen) Date: Wed, 12 Apr 2006 02:26:24 -0000 Subject: [Bug 36345] Re: speedstep won't load on ThinkPad T20 and s30 (mobile coppermine Pentium 3) References: <20060324063345.5380.9894.malonedeb@gangotri.ubuntu.com> Message-ID: <20060412022624.32313.48929.malone@gandwana.ubuntu.com> $ grep CONFIG_CPU_FREQ_DEBUG /boot/config-2.6.15-19-386 # CONFIG_CPU_FREQ_DEBUG is not set -- speedstep won't load on ThinkPad T20 and s30 (mobile coppermine Pentium 3) https://launchpad.net/malone/bugs/36345 From acornejo at ieee.org Wed Apr 12 02:30:17 2006 From: acornejo at ieee.org (Alejandro Cornejo) Date: Wed, 12 Apr 2006 02:30:17 -0000 Subject: [Bug 38688] Re: unable to boot References: <20060408070420.32313.56814.malonedeb@gandwana.ubuntu.com> Message-ID: <20060412023017.32313.92227.malone@gandwana.ubuntu.com> Ok, after running modprobe sd_mod, nothing happens, /dev/sda3 is still missing. I tried running the command you suggested literally but it didnt work, so i typed it manually for each directory in /sys/class/scsi_device Also, here is the type and model entries, (i thought model could be usefull too). 0:0:0:0/model DVD-ROM TS-H352C 0:0:0:0/type 5 0:0:1:0/model DVD+-RW 0:0:1:0/type 5 1:0:0:0/model 223 U HS-CF 1:0:0:0/type 0 1:0:0:1/model 223 U HS-MS 1:0:0:1/type 0 1:0:0:2/model 223 U HS-SM 1:0:0:2/type 0 1:0:0:3/model 223 U HS-SD/MMC 1:0:0:3/type 0 So in case you are wondering, the first two entries are obviously my DVD and DVDRW drives, and the last four are from my usb multi card reader. I also did a cat /sys/block/sd{a,b,c,d}/device/model here is the result: HS-CF HS-MS HS-SM HS-SD/MMC So it is using my usb multi reader as sd{a,b,c,d} If i boot with kernel 2.6.15-19 I get the following with cat /sys/block/sd{a,b,c,d,e}/device/model ST3160828AS HS-CF HS-MS HS-SM HS-SD/MMC So my hard disk is first. So? what is next? I tried to gather more info about the bug, but the prompt is really limited, even commands like lsmod/rmmod/fdisk are missing. -- unable to boot https://launchpad.net/malone/bugs/38688 From scott at ubuntu.com Wed Apr 12 02:46:47 2006 From: scott at ubuntu.com (Scott James Remnant) Date: Wed, 12 Apr 2006 02:46:47 -0000 Subject: [Bug 38688] Re: unable to boot References: <20060408070420.32313.56814.malonedeb@gandwana.ubuntu.com> Message-ID: <20060412024647.32233.58881.malone@gandwana.ubuntu.com> Ok, so it hasn't detected your hard drive at all! That's interesting. Can you boot with -19 and run "udevinfo -a -p /block/sda" providing the output. -- unable to boot https://launchpad.net/malone/bugs/38688 From acornejo at ieee.org Wed Apr 12 04:07:32 2006 From: acornejo at ieee.org (Alejandro Cornejo) Date: Wed, 12 Apr 2006 04:07:32 -0000 Subject: [Bug 38688] Re: unable to boot References: <20060408070420.32313.56814.malonedeb@gandwana.ubuntu.com> Message-ID: <20060412040732.24486.95193.malone@gangotri.ubuntu.com> ok, here it is: device '/sys/block/sda' has major:minor 8:0 looking at class device '/sys/block/sda': KERNEL=="sda" SUBSYSTEM=="block" SYSFS{dev}=="8:0" SYSFS{range}=="16" SYSFS{removable}=="0" SYSFS{size}=="312500000" SYSFS{stat}==" 13502 108744 673213 92592 8283 38084 370430 414383 0 62733 506974" follow the "device"-link to the physical device: looking at the device chain at '/sys/devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0': BUS=="scsi" ID=="0:0:0:0" DRIVER=="sd" SYSFS{device_blocked}=="0" SYSFS{iocounterbits}=="32" SYSFS{iodone_cnt}=="0x552b" SYSFS{ioerr_cnt}=="0x0" SYSFS{iorequest_cnt}=="0x552b" SYSFS{model}=="ST3160828AS " SYSFS{queue_depth}=="1" SYSFS{queue_type}=="none" SYSFS{rev}=="8.04" SYSFS{scsi_level}=="6" SYSFS{state}=="running" SYSFS{timeout}=="30" SYSFS{type}=="0" SYSFS{vendor}=="ATA " looking at the device chain at '/sys/devices/pci0000:00/0000:00:1f.2/host0/target0:0:0': BUS=="" ID=="target0:0:0" DRIVER=="unknown" looking at the device chain at '/sys/devices/pci0000:00/0000:00:1f.2/host0': BUS=="" ID=="host0" DRIVER=="unknown" looking at the device chain at '/sys/devices/pci0000:00/0000:00:1f.2': BUS=="pci" ID=="0000:00:1f.2" DRIVER=="ata_piix" SYSFS{class}=="0x010180" SYSFS{device}=="0x27c0" SYSFS{irq}=="225" SYSFS{local_cpus}=="03" SYSFS{modalias}=="pci:v00008086d000027C0sv00001028sd000001D1bc01sc01i80" SYSFS{subsystem_device}=="0x01d1" SYSFS{subsystem_vendor}=="0x1028" SYSFS{vendor}=="0x8086" looking at the device chain at '/sys/devices/pci0000:00': BUS=="" ID=="pci0000:00" DRIVER=="unknown" Hope it helps, i'm will reboot right now, and do a modprobe ata_piix, libata, and see if that helps. -- unable to boot https://launchpad.net/malone/bugs/38688 From mroth at sims.berkeley.edu Wed Apr 12 04:07:31 2006 From: mroth at sims.berkeley.edu (mroth) Date: Wed, 12 Apr 2006 04:07:31 -0000 Subject: [Bug 35215] Re: ipw3945 driver required for functionality on new Intel PRO/Wireless 3945ABG Mini-PCI Express Adapters References: <20060316173707.11105.89035.malonedeb@gandwana.ubuntu.com> Message-ID: <20060412040731.32233.80394.malone@gandwana.ubuntu.com> The official Intel drivers for this appear to have been released (version 1.0). -- ipw3945 driver required for functionality on new Intel PRO/Wireless 3945ABG Mini-PCI Express Adapters https://launchpad.net/malone/bugs/35215 From acornejo at ieee.org Wed Apr 12 04:24:10 2006 From: acornejo at ieee.org (Alejandro Cornejo) Date: Wed, 12 Apr 2006 04:24:10 -0000 Subject: [Bug 38688] Re: unable to boot References: <20060408070420.32313.56814.malonedeb@gandwana.ubuntu.com> Message-ID: <20060412042411.32313.47908.malone@gandwana.ubuntu.com> .... so if you are wondering... after doing modprobe ata_piix, modprobe libata, modprobe sd_mod, etc.. nothing changed.. I also killed udevd and restarted it, as well as executing udevplug. I am really just *#!@#$ around, as I am not familiar with the inner workings of the kernel init process or udev. So.. what is next? (again) -- unable to boot https://launchpad.net/malone/bugs/38688 From scott at ubuntu.com Wed Apr 12 04:31:52 2006 From: scott at ubuntu.com (Scott James Remnant) Date: Wed, 12 Apr 2006 04:31:52 -0000 Subject: [Bug 38688] Re: unable to boot References: <20060408070420.32313.56814.malonedeb@gandwana.ubuntu.com> Message-ID: <20060412043152.24486.99424.malone@gangotri.ubuntu.com> Nope, that was a good guess :) Could you try rebooting into the broken system again, and do "grep ata_piix /proc/modules" to see whether it's loaded; if not, could you check whether you have anything like /dev/hd* -- your SATA controller may have regressed to the dark ages. Also can you do ls /sys/block and give the list of what's in there (ignore the ram and dm stuff) -- unable to boot https://launchpad.net/malone/bugs/38688 From acornejo at ieee.org Wed Apr 12 04:42:08 2006 From: acornejo at ieee.org (Alejandro Cornejo) Date: Wed, 12 Apr 2006 04:42:08 -0000 Subject: [Bug 38688] Re: unable to boot References: <20060408070420.32313.56814.malonedeb@gandwana.ubuntu.com> Message-ID: <20060412044208.32233.38957.malone@gandwana.ubuntu.com> ok, sit tight (dont go to sleep) ill be back in 3+fraction minutes to report on what happened. -- unable to boot https://launchpad.net/malone/bugs/38688 From acornejo at ieee.org Wed Apr 12 04:53:04 2006 From: acornejo at ieee.org (Alejandro Cornejo) Date: Wed, 12 Apr 2006 04:53:04 -0000 Subject: [Bug 38688] Re: unable to boot References: <20060408070420.32313.56814.malonedeb@gandwana.ubuntu.com> Message-ID: <20060412045304.24516.41829.malone@gangotri.ubuntu.com> The module ata_piix was being loaded (nice trick to use cat instead of lsmod :) ) Here is the info, although i'm pretty sure its useless: ata_piix 12548 0 -live 0xffffffff880ab000 I had no /dev/hd* entries, the closest thing is /dev/hpet, which i'm pretty sure has nothing to do with hard drives. Also, aside from ram[0-15] and sd{a,b,c,d}, there is nothing in /sys/block, no even the dm-[0-3] u mentioned. waiting for instructions... (is there any hack to reduce that 3 minute timeout?) -- unable to boot https://launchpad.net/malone/bugs/38688 From acornejo at ieee.org Wed Apr 12 04:53:46 2006 From: acornejo at ieee.org (Alejandro Cornejo) Date: Wed, 12 Apr 2006 04:53:46 -0000 Subject: [Bug 38688] Re: unable to boot References: <20060408070420.32313.56814.malonedeb@gandwana.ubuntu.com> Message-ID: <20060412045350.32313.58540.malone@gandwana.ubuntu.com> The module ata_piix was being loaded (nice trick to use cat instead of lsmod :) ) Here is the info, although i'm pretty sure its useless: ata_piix 12548 0 -live 0xffffffff880ab000 I had no /dev/hd* entries, the closest thing is /dev/hpet, which i'm pretty sure has nothing to do with hard drives. Also, aside from ram[0-15] and sd{a,b,c,d}, there is nothing in /sys/block, no even the dm-[0-3] u mentioned. waiting for instructions... (is there any hack to reduce that 3 minute timeout?) -- unable to boot https://launchpad.net/malone/bugs/38688 From acornejo at ieee.org Wed Apr 12 04:54:44 2006 From: acornejo at ieee.org (Alejandro Cornejo) Date: Wed, 12 Apr 2006 04:54:44 -0000 Subject: [Bug 38688] Re: unable to boot References: <20060408070420.32313.56814.malonedeb@gandwana.ubuntu.com> Message-ID: <20060412045444.24486.97438.malone@gangotri.ubuntu.com> The module ata_piix was being loaded (nice trick to use cat instead of lsmod :) ) Here is the info, although i'm pretty sure its useless: ata_piix 12548 0 -live 0xffffffff880ab000 I had no /dev/hd* entries, the closest thing is /dev/hpet, which i'm pretty sure has nothing to do with hard drives. Also, aside from ram[0-15] and sd{a,b,c,d}, there is nothing in /sys/block, no even the dm-[0-3] u mentioned. waiting for instructions... (is there any hack to reduce that 3 minute timeout?) -- unable to boot https://launchpad.net/malone/bugs/38688 From mail at carthik.net Wed Apr 12 04:59:53 2006 From: mail at carthik.net (Carthik Sharma) Date: Wed, 12 Apr 2006 04:59:53 -0000 Subject: [Bug 16416] Re: powernowd causes mouse to become erratic on high I/O load References: <20060113134628.21012.8912.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060412045954.24516.83246.malone@gangotri.ubuntu.com> Thank you for reporting this bug and following up on it. I am marking this bug Closed since there has been no response from you for over three months. We would like to fix all existing issues, but need need feedback to help with debugging. Should you still have a problem with the latest up to date Dapper kernel and packages, please reopen this bug. In this case, please answer the questions that have already been asked of you before and provide the log files and information required for debugging. Thanks again, please report any other issues you have after checking that they haven't already been reported. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Needs Info => Rejected -- powernowd causes mouse to become erratic on high I/O load https://launchpad.net/malone/bugs/16416 From mail at carthik.net Wed Apr 12 04:56:50 2006 From: mail at carthik.net (Carthik Sharma) Date: Wed, 12 Apr 2006 04:56:50 -0000 Subject: [Bug 16961] Re: System freezes whilst powernowd stepping up AMD64 freq (intermittent/hoary) References: <20060113134909.21012.75586.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060412045650.24516.20883.malone@gangotri.ubuntu.com> Thank you for reporting this bug and following up on it. I am marking this bug Closed since there has been no response from you for over three months. We would like to fix all existing issues, but need need feedback to help with debugging. Should you still have a problem with the latest up to date Dapper kernel and packages, please reopen this bug, answering the+questions that have already been asked of you before. Thanks again, please report any other issues you have after checking that they haven't already been reported. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Needs Info => Rejected -- System freezes whilst powernowd stepping up AMD64 freq (intermittent/hoary) https://launchpad.net/malone/bugs/16961 From kahing at gmail.com Wed Apr 12 05:15:30 2006 From: kahing at gmail.com (Ka-Hing Cheung) Date: Wed, 12 Apr 2006 05:15:30 -0000 Subject: [Bug 39237] Re: Resuming from hibernation fails References: <20060412012833.32233.60531.malonedeb@gandwana.ubuntu.com> Message-ID: <20060412051530.24486.77631.malone@gangotri.ubuntu.com> Using 2.6.15-20-k7, essentailly the same trace in syslog. Happened every time I tried it. -- Resuming from hibernation fails https://launchpad.net/malone/bugs/39237 From scott at ubuntu.com Wed Apr 12 05:16:55 2006 From: scott at ubuntu.com (Scott James Remnant) Date: Wed, 12 Apr 2006 05:16:55 -0000 Subject: [Bug 38688] Re: unable to boot References: <20060408070420.32313.56814.malonedeb@gandwana.ubuntu.com> Message-ID: <20060412051655.24516.18838.malone@gangotri.ubuntu.com> Easiest hack is to put "break=mount" on the kernel command-line. I don't suppose you have a digital camera (or one in a phone) handy? If so, could you boot without quiet or splash on the command-line and with break=mount. (You can edit the command line from the GRUB boot menu if you've never done that before) You'll get a screen or more full of messages, use shift-pgup and try and take photos of them all and attach them to this bug. -- unable to boot https://launchpad.net/malone/bugs/38688 From scott at ubuntu.com Wed Apr 12 05:17:32 2006 From: scott at ubuntu.com (Scott James Remnant) Date: Wed, 12 Apr 2006 05:17:32 -0000 Subject: [Bug 38688] Re: unable to boot References: <20060408070420.32313.56814.malonedeb@gandwana.ubuntu.com> Message-ID: <20060412051732.32233.96256.malone@gandwana.ubuntu.com> Ben: This is clearly a kernel bug ... ata_piix is loaded (same as old kernel) but their drive just flat-out isn't appearing (not even in /sys/block) ** Changed in: linux-source-2.6.15 (Ubuntu) Assignee: (unassigned) => Ubuntu Kernel Team -- unable to boot https://launchpad.net/malone/bugs/38688 From mail at carthik.net Wed Apr 12 05:22:54 2006 From: mail at carthik.net (Carthik Sharma) Date: Wed, 12 Apr 2006 05:22:54 -0000 Subject: [Bug 18080] Re: Battery not found.... References: <20060113135440.21012.70806.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060412052254.32233.2350.malone@gandwana.ubuntu.com> Thank you for reporting this bug and following up on it. I am marking this bug Closed since there has been no response from you for over three months. We would like to fix all existing issues, but need need feedback to help with debugging. Should you still have a problem with the latest up to date Dapper kernel and packages, please reopen this bug. In this case, please answer the questions that have already been asked of you before and provide the log files and information required for debugging. Thanks again, please report any other issues you have after checking that they haven't already been reported. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Needs Info => Rejected -- Battery not found.... https://launchpad.net/malone/bugs/18080 From mail at carthik.net Wed Apr 12 05:27:36 2006 From: mail at carthik.net (Carthik Sharma) Date: Wed, 12 Apr 2006 05:27:36 -0000 Subject: [Bug 17824] Re: vga16fb looks bad with sis chipset (LCD) References: <20060113135328.21012.6094.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060412052737.32233.34481.malone@gandwana.ubuntu.com> Closing this bug as per the reporter's request. Thank you for reporting this bug, please report any others you may find. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Needs Info => Rejected -- vga16fb looks bad with sis chipset (LCD) https://launchpad.net/malone/bugs/17824 From mail at carthik.net Wed Apr 12 05:27:21 2006 From: mail at carthik.net (Carthik Sharma) Date: Wed, 12 Apr 2006 05:27:21 -0000 Subject: [Bug 17788] Re: Inserting and removeing IDE-modules on my Acer TravelMate 620 laptop does not get detected References: <20060113135318.21012.41446.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060412052721.32233.47859.malone@gandwana.ubuntu.com> Thank you for reporting this bug and following up on it. I am marking this bug Closed since there has been no response from you for over three months. We would like to fix all existing issues, but need need feedback to help with debugging. Should you still have a problem with the latest up to date Dapper kernel and packages, please reopen this bug. In this case, please answer the questions that have already been asked of you before and provide the log files and information required for debugging. Thanks again, please report any other issues you have after checking that they haven't already been reported. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Needs Info => Rejected -- Inserting and removeing IDE-modules on my Acer TravelMate 620 laptop does not get detected https://launchpad.net/malone/bugs/17788 From mail at carthik.net Wed Apr 12 05:35:33 2006 From: mail at carthik.net (Carthik Sharma) Date: Wed, 12 Apr 2006 05:35:33 -0000 Subject: [Bug 36089] Re: After Kernel update (3/21/2006) no sound References: <20060323010921.24660.83604.malonedeb@gandwana.ubuntu.com> Message-ID: <20060412053533.32313.64752.malone@gandwana.ubuntu.com> This could be a duplicate of Bug #38546 which is marked Fix Committed. Thank you. -- After Kernel update (3/21/2006) no sound https://launchpad.net/malone/bugs/36089 From fabbione at ubuntu.com Wed Apr 12 05:39:03 2006 From: fabbione at ubuntu.com (Fabio Massimo Di Nitto) Date: Wed, 12 Apr 2006 05:39:03 -0000 Subject: [Bug 26859] Re: general: 2.6.12-10 regressions from 2.6.12-9 References: <20060113145140.21012.69410.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060412053903.24486.32922.malone@gangotri.ubuntu.com> Hi everybody again, I still have 2 kernels for you to test here (amd64-k8 and k8-smp) and nobody did asnwer my request for information. Should I assume this problem is gone automatically? please test and let me know. Thanks Fabio -- general: 2.6.12-10 regressions from 2.6.12-9 https://launchpad.net/malone/bugs/26859 From acornejo at ieee.org Wed Apr 12 05:47:25 2006 From: acornejo at ieee.org (Alejandro Cornejo) Date: Wed, 12 Apr 2006 05:47:25 -0000 Subject: [Bug 38688] Re: unable to boot References: <20060408070420.32313.56814.malonedeb@gandwana.ubuntu.com> Message-ID: <20060412054725.24486.51232.malone@gangotri.ubuntu.com> Is there a less archaic way of doing this? I have a USB drive, some memory sticks, a laptop? I followed your instructions anyway, I dont know how to add attachments in here, so I uploaded the photos to the web, here is the URL: http://www.mcc.unam.mx/~acornejoc/public/temp/ -- unable to boot https://launchpad.net/malone/bugs/38688 From scott at ubuntu.com Wed Apr 12 05:54:19 2006 From: scott at ubuntu.com (Scott James Remnant) Date: Wed, 12 Apr 2006 05:54:19 -0000 Subject: [Bug 38688] Re: unable to boot References: <20060408070420.32313.56814.malonedeb@gandwana.ubuntu.com> Message-ID: <20060412055419.24486.34708.malone@gangotri.ubuntu.com> Unfortunately at the point you are, there's not much of a system available. Can you keep those photos online until this bug is resolved? -- unable to boot https://launchpad.net/malone/bugs/38688 From tommy at home.tig-grr.com Wed Apr 12 05:52:04 2006 From: tommy at home.tig-grr.com (Tom Marshall) Date: Wed, 12 Apr 2006 05:52:04 -0000 Subject: [Bug 39160] Re: [Bug 39160] Re: swsusp/hibernate started hanging recently References: <20060411162704.32233.18489.malonedeb@gandwana.ubuntu.com> <20060411173326.32233.38020.malone@gandwana.ubuntu.com> Message-ID: <20060412055204.GA25612@home.tig-grr.com> > Are there any message on the screen during the suspend? No, the display does not go to text mode. I can switch to a VT, though, if it would help in diagnosing the problem. -- swsusp/hibernate started hanging recently https://launchpad.net/malone/bugs/39160 From acornejo at ieee.org Wed Apr 12 05:56:17 2006 From: acornejo at ieee.org (Alejandro Cornejo) Date: Wed, 12 Apr 2006 05:56:17 -0000 Subject: [Bug 38688] Re: unable to boot References: <20060408070420.32313.56814.malonedeb@gandwana.ubuntu.com> Message-ID: <20060412055617.24486.62845.malone@gangotri.ubuntu.com> Ok, so i think the key is in this pic: http://www.mcc.unam.mx/~acornejoc/public/temp/DSCN1438.JPG The output differs from the previous kernel, here it is (using dmesg with 15-19) [ 17.791201] ata1: SATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0xFFA0 irq 14 [ 17.945593] ata1: dev 0 cfg 49:2f00 82:346b 83:7701 84:4003 85:3469 86:3401 87:4003 88:207f [ 17.945598] ata1: dev 0 ATA-7, max UDMA/133, 312500000 sectors: LBA48 [ 17.945831] ata1: dev 0 configured for UDMA/133 [ 17.945834] scsi0 : ata_piix [ 17.946085] Vendor: ATA Model: ST3160828AS Rev: 8.04 [ 17.946100] Type: Direct-Access ANSI SCSI revision: 05 [ 17.946347] ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xFFA8 irq 15 [ 18.267525] ata2: dev 0 cfg 49:0f00 82:0210 83:4011 84:4000 85:0000 86:0001 87:4000 88:0407 [ 18.267528] ata2: dev 0 ATAPI, max UDMA/33 [ 18.267530] ata2(0): applying bridge limits [ 18.421481] ata2: dev 1 cfg 49:0b00 82:0000 83:0000 84:0000 85:0000 86:0000 87:0000 88:0407 [ 18.421484] ata2: dev 1 ATAPI, max UDMA/33 [ 18.421486] ata2(0): applying bridge limits [ 18.421671] ata2: dev 0 configured for UDMA/33 [ 18.421865] ata2: dev 1 configured for UDMA/33 [ 18.421868] scsi1 : ata_piix [ 18.422492] Vendor: TSSTcorp Model: DVD-ROM TS-H352C Rev: DE02 [ 18.422507] Type: CD-ROM ANSI SCSI revision: 05 [ 18.423974] Vendor: _NEC Model: DVD+-RW ND-3530A Rev: 103C [ 18.423989] Type: CD-ROM ANSI SCSI revision: 05 So when using 15-19 I get ata1=hard drive, ata2=dvd+dvdrw In contrast, in 15-20 I get ata1=0x1fe IDE port busy, and after that, ata1=dvd+dvdrw and I get no hard drive. -- unable to boot https://launchpad.net/malone/bugs/38688 From scott at ubuntu.com Wed Apr 12 05:56:23 2006 From: scott at ubuntu.com (Scott James Remnant) Date: Wed, 12 Apr 2006 05:56:23 -0000 Subject: [Bug 38688] Re: unable to boot References: <20060408070420.32313.56814.malonedeb@gandwana.ubuntu.com> Message-ID: <20060412055623.24516.94109.malone@gangotri.ubuntu.com> 1438 shows ata_piix loading, and shows the error "0x1f0 IDE port busy" 1441 shows ide-generic loading, and the (expected) errors "I/O resource 0x1F0-0x1F7 not free." So looks like ata_piix is refusing to claim the port your hard-drive is on. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Needs Info => Confirmed -- unable to boot https://launchpad.net/malone/bugs/38688 From fatejudger at gmail.com Wed Apr 12 06:02:05 2006 From: fatejudger at gmail.com (fatejudger) Date: Wed, 12 Apr 2006 06:02:05 -0000 Subject: [Bug 36510] Re: ALSA Audigy 2 NX sound mixing problem References: <20060324235832.20484.67345.malonedeb@gangotri.ubuntu.com> Message-ID: <20060412060205.32313.25419.malone@gandwana.ubuntu.com> Sorry about that, I figured the description was clear enough. Basically, the problem is only 1 program can use ALSA at a time. Normally programs that support ALSA can run in tandem, playing sounds at the same time. For example, I used to be able to have aRts and amaroK piping sound through my sound card at the same time. However, when I upgraded to my Audigy 2 NX, this functionality disappeared. If you need any more info, let me know. Thanks. -- ALSA Audigy 2 NX sound mixing problem https://launchpad.net/malone/bugs/36510 From acornejo at ieee.org Wed Apr 12 05:58:23 2006 From: acornejo at ieee.org (Alejandro Cornejo) Date: Wed, 12 Apr 2006 05:58:23 -0000 Subject: [Bug 38688] Re: unable to boot References: <20060408070420.32313.56814.malonedeb@gandwana.ubuntu.com> Message-ID: <20060412055823.24516.93473.malone@gangotri.ubuntu.com> Yes, the pics will be online, good thing u are night owls too. Any further suggestions? -- unable to boot https://launchpad.net/malone/bugs/38688 From acornejo at ieee.org Wed Apr 12 06:02:03 2006 From: acornejo at ieee.org (Alejandro Cornejo) Date: Wed, 12 Apr 2006 06:02:03 -0000 Subject: [Bug 38688] Re: unable to boot References: <20060408070420.32313.56814.malonedeb@gandwana.ubuntu.com> Message-ID: <20060412060203.24516.90718.malone@gangotri.ubuntu.com> Yes, the pics will be online, good thing u are night owls too. Any further suggestions? -- unable to boot https://launchpad.net/malone/bugs/38688 From acornejo at ieee.org Wed Apr 12 06:05:37 2006 From: acornejo at ieee.org (Alejandro Cornejo) Date: Wed, 12 Apr 2006 06:05:37 -0000 Subject: [Bug 38688] Re: unable to boot References: <20060408070420.32313.56814.malonedeb@gandwana.ubuntu.com> Message-ID: <20060412060537.24486.60639.malone@gangotri.ubuntu.com> (forum admin's): Damn, every time i reload this shit double posts, you should use phpbb (scott+ben): Where can i get the changelog of what happened from 15-19, to 15-20, i tried www.kernel.org, but then i realized the modifications where probably by the ubuntu team and have nothing to do with the kernel project. -- unable to boot https://launchpad.net/malone/bugs/38688 From brodock at gmail.com Wed Apr 12 06:11:11 2006 From: brodock at gmail.com (BrodocK) Date: Wed, 12 Apr 2006 06:11:11 -0000 Subject: [Bug 36673] Re: Can't Compile Kernele References: <20060326042518.6253.77920.malonedeb@gandwana.ubuntu.com> Message-ID: <20060412061111.24486.60098.malone@gangotri.ubuntu.com> I had to disable this: drivers/usb/net/zd1211 to make it work correctly (if you try to build using my config you will fail, i think... as i can reproduce it all the time i try to compile with this zd1211 turned on). as i don't really need it i disabled and i have all the fun now :) i'm trying badram rc for this kernel with sucess (i had to correct a little incompatibility with nvidia restricted module, i think recompiled kernel's can't use it... so i'm going to download nvidia kernel source from repository and try to recompile again with it...) thanks by now -- Can't Compile Kernele https://launchpad.net/malone/bugs/36673 From scott at ubuntu.com Wed Apr 12 06:20:30 2006 From: scott at ubuntu.com (Scott James Remnant) Date: Wed, 12 Apr 2006 06:20:30 -0000 Subject: [Bug 38688] Re: unable to boot References: <20060408070420.32313.56814.malonedeb@gandwana.ubuntu.com> Message-ID: <20060412062031.32313.75395.malone@gandwana.ubuntu.com> I don't have any particular suggestions at this point; there's clearly Strange Things Afoot at the Circle K(ernel) https://launchpad.net/distros/ubuntu/dapper/+source/linux-source-2.6.15/+changelog Is the current changelog -- unable to boot https://launchpad.net/malone/bugs/38688 From vytautas.liuolia at gmail.com Wed Apr 12 06:27:17 2006 From: vytautas.liuolia at gmail.com (Vytas) Date: Wed, 12 Apr 2006 06:27:17 -0000 Subject: [Bug 37127] Re: i915 DRI driver seems to get the z-buffer backward References: <20060329065834.6253.91226.malonedeb@gandwana.ubuntu.com> Message-ID: <20060412062717.32313.91103.malone@gandwana.ubuntu.com> *** This bug is a duplicate of bug 22045 *** I'm pretty sure its the same notorious #22045 ** Changed in: linux-source-2.6.15 (Ubuntu) Sourcepackagename: linux-source-2.6.15 => gnome-screensaver Binarypackagename: linux-source-2.6.15 => gnome-screensaver ** This bug has been marked a duplicate of bug 22045 Poor performance / flickering with OpenGL hacks -- i915 DRI driver seems to get the z-buffer backward https://launchpad.net/malone/bugs/37127 From crimsun at fungus.sh.nu Wed Apr 12 06:27:24 2006 From: crimsun at fungus.sh.nu (Daniel T. Chen) Date: Wed, 12 Apr 2006 06:27:24 -0000 Subject: [Bug 36089] Re: After Kernel update (3/21/2006) no sound References: <20060323010921.24660.83604.malonedeb@gandwana.ubuntu.com> Message-ID: <20060412062724.24486.7451.malone@gangotri.ubuntu.com> (#38546 is a different issue altogether) snd_seq_dummy 3844 0 ^^ Why is this module loaded? In addition to the information that Matt requests, please _attach_ (please don't comment inline) the output from ``cat /proc/asound/modules''. -- After Kernel update (3/21/2006) no sound https://launchpad.net/malone/bugs/36089 From peter at liedler.at Wed Apr 12 07:27:09 2006 From: peter at liedler.at (Peter Liedler) Date: Wed, 12 Apr 2006 07:27:09 -0000 Subject: [Bug 35215] Re: ipw3945 driver required for functionality on new Intel PRO/Wireless 3945ABG Mini-PCI Express Adapters References: <20060316173707.11105.89035.malonedeb@gandwana.ubuntu.com> Message-ID: <20060412072709.24486.40858.malone@gangotri.ubuntu.com> Still on dapper flight-6 The setup doesn't detect the wireless nic (ipw3945) on my ASUS W5F -- ipw3945 driver required for functionality on new Intel PRO/Wireless 3945ABG Mini-PCI Express Adapters https://launchpad.net/malone/bugs/35215 From peter at liedler.at Wed Apr 12 07:30:41 2006 From: peter at liedler.at (Peter Liedler) Date: Wed, 12 Apr 2006 07:30:41 -0000 Subject: [Bug 39253] Enter in hibernate mode ASUS W5F References: <20060412073041.32233.48934.malonedeb@gandwana.ubuntu.com> Message-ID: <20060412073041.32233.48934.malonedeb@gandwana.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: Hibernate mode works when power cord is plugged in. If running on batteries, hibernate mode tries to write image to disk and never powers down. Please tell me how I can submit additional information. tested with dapper flight-6 -- Enter in hibernate mode ASUS W5F https://launchpad.net/malone/bugs/39253 From 84yelo3 at gmail.com Wed Apr 12 07:32:13 2006 From: 84yelo3 at gmail.com (=?utf-8?q?Nicol=C3=B2_Chieffo?=) Date: Wed, 12 Apr 2006 07:32:13 -0000 Subject: [Bug 36403] Re: [Bug 36403] Re: suspend hangs ipw2200 References: <20060324110342.4831.93832.malonedeb@gandwana.ubuntu.com> <20060412001035.32233.60016.malone@gandwana.ubuntu.com> Message-ID: <641322f90604120032o4fb0caddi46f51525afcbe59c@mail.gmail.com> Dear Matt, I've always upgraded my dapper using apt-get --purge dist-upgrade is this enough, or should I try to reinstall dapper flight 6 and then upgrade it? -- suspend hangs ipw2200 https://launchpad.net/malone/bugs/36403 From scott at ubuntu.com Wed Apr 12 07:44:08 2006 From: scott at ubuntu.com (Scott James Remnant) Date: Wed, 12 Apr 2006 07:44:08 -0000 Subject: [Bug 21025] Re: Irda: nsc-ircc needs module options to work correctly References: <20060113141026.21012.47822.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060412074409.32313.81208.launchpad@gandwana.ubuntu.com> ** Changed in: linux-source-2.6.15 (Ubuntu) Assignee: Scott James Remnant => Ubuntu Kernel Team -- Irda: nsc-ircc needs module options to work correctly https://launchpad.net/malone/bugs/21025 From tschwinge at gnu.org Wed Apr 12 07:42:02 2006 From: tschwinge at gnu.org (Thomas Schwinge) Date: Wed, 12 Apr 2006 07:42:02 -0000 Subject: [Bug 34780] Re: [Bug 34780] bridge module, misbehaviour after suspending (or hibernating) References: <20060313155837.17018.55204.malonedeb@gangotri.ubuntu.com> Message-ID: <20060412074201.GG6881@fencepost> That's how it currently mostly (i.e. sometimes it also works as expected) looks like after resuming from hibernation (I don't use suspend-to-RAM very much): #v+ thomas at dirichlet:~ $ brctl show bridge name bridge id STP enabled interfaces br0_ifrename 8000.00112517b49d no eth0 thomas at dirichlet:~ $ ifconfig eth0 eth0 Link encap:Ethernet HWaddr 00:11:25:17:B4:9D inet6 addr: fe80::211:25ff:fe17:b49d/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:255 errors:0 dropped:0 overruns:0 frame:0 TX packets:6 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:100 RX bytes:16718 (16.3 KiB) TX bytes:492 (492.0 b) Base address:0x8000 Memory:c0240000-c0260000 thomas at dirichlet:~ $ ifconfig br0 br0: error fetching interface information: Device not found thomas at dirichlet:~ $ ifconfig br0_ifrename br0_ifren Link encap:Ethernet HWaddr 00:11:25:17:B4:9D BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) thomas at dirichlet:~ $ lsmod | grep bridge bridge 55764 0 #v- What is this `br0_ifrename' device? Is this perhaps just a deficiency in your networking scripting works? To get things going again I do the following: #v+ thomas at dirichlet:~ $ sudo rmmod bridge Password: thomas at dirichlet:~ $ sudo rmmod bridge thomas at dirichlet:~ $ sudo rmmod bridge ERROR: Module bridge does not exist in /proc/modules thomas at dirichlet:~ $ sudo ifup br0 Waiting for br0 to get ready (MAXWAIT is 302 seconds). Internet Systems Consortium DHCP Client V3.0.3 Copyright 2004-2005 Internet Systems Consortium. All rights reserved. For info, please visit http://www.isc.org/products/DHCP Listening on LPF/br0/00:11:25:17:b4:9d Sending on LPF/br0/00:11:25:17:b4:9d Sending on Socket/fallback DHCPDISCOVER on br0 to 255.255.255.255 port 67 interval 4 DHCPOFFER from 192.168.111.112 DHCPREQUEST on br0 to 255.255.255.255 port 67 DHCPACK from 192.168.111.112 bound to 192.168.111.245 -- renewal in 27257 seconds. #v- Yes, I can and do unload the bridge module two times. Note that this report is differing to the original one in me having changed from `ath0' (Atheros wireless) to `eth0'. I could try to reproduce this also with the `ath0' device, if there's interest. I could also try to reproduce it using suspend-to-RAM instead of suspend-to-disk, if there's interest. -- bridge module, misbehaviour after suspending (or hibernating) https://launchpad.net/malone/bugs/34780 From martin.pitt at ubuntu.com Wed Apr 12 08:01:11 2006 From: martin.pitt at ubuntu.com (Martin Pitt) Date: Wed, 12 Apr 2006 08:01:11 -0000 Subject: [Bug 34066] Re: usb mouse dead on resume References: <20060308112717.14318.84205.malonedeb@gangotri.ubuntu.com> Message-ID: <20060412080111.24486.82523.malone@gangotri.ubuntu.com> Happens here on amd64 as well. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Unconfirmed => Confirmed -- usb mouse dead on resume https://launchpad.net/malone/bugs/34066 From towolf at gmx.net Wed Apr 12 08:12:39 2006 From: towolf at gmx.net (towolf) Date: Wed, 12 Apr 2006 08:12:39 -0000 Subject: [Bug 34066] Re: usb mouse dead on resume References: <20060308112717.14318.84205.malonedeb@gangotri.ubuntu.com> Message-ID: <20060412081239.24486.25467.malone@gangotri.ubuntu.com> I experience the same as Mikko with the difference that re-attaching the mouse doesn't fix it; my mouse driver is evdev though, which generally doesn't like if the mouse moves around. -- usb mouse dead on resume https://launchpad.net/malone/bugs/34066 From bertoldic at yahoo.it Wed Apr 12 08:44:40 2006 From: bertoldic at yahoo.it (bertoldic) Date: Wed, 12 Apr 2006 08:44:40 -0000 Subject: [Bug 39266] Kernel error References: <20060412084440.32233.37859.malonedeb@gandwana.ubuntu.com> Message-ID: <20060412084440.32233.37859.malonedeb@gandwana.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 linux-image-2.6.15-20-386 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: I've a laptop Asus A2500K with Athlon 64 with the previous version of the kernel all was right but with the upgrade to the lastest version I've received this error: PCI FAILED TO ALLOCATE MEM RESOURCE However the system works well -- Kernel error https://launchpad.net/malone/bugs/39266 From samuellb at bredband.net Wed Apr 12 08:57:44 2006 From: samuellb at bredband.net (=?utf-8?q?Samuel_Lid=C3=A9n_Borell?=) Date: Wed, 12 Apr 2006 08:57:44 -0000 Subject: [Bug 34781] Re: [Dapper] boot fails on HP Pavilion dv5000 References: <20060313160554.17044.88668.malonedeb@gangotri.ubuntu.com> Message-ID: <20060412085744.32313.8496.malone@gandwana.ubuntu.com> There actually was an update for the BIOS and it helped (the computer boots correctly and the battery monitor is working)! It never showed up in HP's update software but it was available on the HP web site. -- [Dapper] boot fails on HP Pavilion dv5000 https://launchpad.net/malone/bugs/34781 From woldacc at gmail.com Wed Apr 12 09:02:07 2006 From: woldacc at gmail.com (Fabio Silva) Date: Wed, 12 Apr 2006 09:02:07 -0000 Subject: [Bug 36322] Re: No firmware for mrv8k References: <20060323231357.18295.12928.malonedeb@gandwana.ubuntu.com> Message-ID: <20060412090207.24516.23101.malone@gangotri.ubuntu.com> I did the extraction and put the firmware in /lib/firmware. But now, when I do 'modprobe mrv8k' I get this in dmesg: ----------------------------------------------- (...) [4294847.104000] mrv8k: Marvel 8xxx Wireless driver, 0.0.2 [4294847.104000] mrv8k: Copyright(c) 2005 Luc Saillard [4294847.105000] mrv8k: mrv8k_init_one: enter [4294847.105000] ACPI: PCI Interrupt 0000:00:08.0[A] -> GSI 19 (level, low) -> I RQ 201 [4294847.106000] mrv8k: bar1 (0xdfff0000) relocated at 0xe1420000 [4294847.107000] mrv8k: bar2 (0xdffe0000) relocated at 0xe1440000 [4294847.120000] eth1 (WE) : Driver using old /proc/net/wireless support, please fix driver ! [4294853.611000] mrv8k: Command GET_CONFIG. len=44 macaddr=ff:ff:ff:ff:ff:ff [4294853.611000] mrv8k: queue command (cf6fc600) [4294853.611000] mrv8k: kickoff command (cf6fc600) [4294853.611000] mrv8k: mrv8k_interrupt: eth1 [4294853.611000] mrv8k: mrv8k_irq_tasklet: eth1 [4294853.611000] mrv8k: Interrupt Event fired [4294853.611000] mrv8k: mrv8k_irq_tasklet_events [4294853.611000] mrv8k: Received an event message CONFIG len=002c [4294853.611000] mrv8k: Packet configuration: [4294853.611000] 00000000 03 80 2C 00 A0 9A 00 00 07 00 00 00 01 00 00 11 .., ..... ........ [4294853.611000] 00000010 D8 47 B6 B0 30 00 02 00 06 00 03 02 24 A2 00 C0 .G. .0... ....$... [4294853.611000] 00000020 28 A2 00 C0 2C A2 00 C0 00 60 0F 0E (.. .,... .`.. [4294853.611000] mrv8k: firmware_version = 33751046/02030006 [4294853.611000] mrv8k: macaddr = 0:11:d8:47:b6:b0 [4294853.611000] mrv8k: revision = 0007 [4294853.611000] mrv8k: model = 0030, modeltype = 0002 [4294853.611000] mrv8k: addr1 = c000a224/ tx_buffer = 0000a224 [4294853.611000] mrv8k: addr2 = c000a228/ rx_buffer0 = 0000a228 [4294853.611000] mrv8k: addr3 = c000a22c/ rx_buffer1 = 0000a22c [4294853.612000] mrv8k: check_macaddr. macaddr=0:11:d8:47:b6:b0 [4294853.612000] mrv8k: Command SET_RADIO. len=12 state=on preamble=auto [4294853.612000] mrv8k: queue command (cf6fc600) [4294853.612000] mrv8k: kickoff command (cf6fc600) [4294853.612000] mrv8k: Command SET_ANTENNA. len=12 antenna=rx power=0xffff [4294853.612000] mrv8k: queue command (cf6fc610) [4294853.612000] mrv8k: command already pending [4294853.612000] mrv8k: Command SET_ANTENNA. len=12 antenna=tx power=0x0002 [4294853.612000] mrv8k: queue command (cf6fc620) [4294853.612000] mrv8k: command already pending [4294853.612000] mrv8k: Command SET_RTS_TRESHOLD. len=12 threshold=2347 [4294853.612000] mrv8k: queue command (cf6fc630) [4294853.612000] mrv8k: command already pending [4294853.612000] mrv8k: mrv8k_init_one: return 0 [4294853.612000] mrv8k: mrv8k_interrupt: eth1 [4294853.612000] mrv8k: mrv8k_irq_tasklet: eth1 [4294853.612000] mrv8k: Interrupt Event fired [4294853.612000] mrv8k: mrv8k_irq_tasklet_events [4294853.612000] mrv8k: Received an event message type=801c len=000c [4294853.612000] mrv8k: Command SET_RADIO. ACK len=12 state=on preamble=auto [4294853.612000] mrv8k: kickoff command (cf6fc610) [4294853.612000] mrv8k: mrv8k_interrupt: eth1 [4294853.612000] mrv8k: mrv8k_irq_tasklet: eth1 [4294853.612000] mrv8k: Interrupt Event fired [4294853.612000] mrv8k: mrv8k_irq_tasklet_events [4294853.612000] mrv8k: Received an event message type=8020 len=000c [4294853.612000] mrv8k: Command SET_ANTENNA. ACK len=12 antenna=rx power=0xffff [4294853.612000] mrv8k: kickoff command (cf6fc620) [4294853.612000] mrv8k: mrv8k_interrupt: eth1 [4294853.612000] mrv8k: mrv8k_irq_tasklet: eth1 [4294853.612000] mrv8k: Interrupt Event fired [4294853.612000] mrv8k: mrv8k_irq_tasklet_events [4294853.612000] mrv8k: Received an event message type=8020 len=000c [4294853.612000] mrv8k: Command SET_ANTENNA. ACK len=12 antenna=tx power=0x0002 [4294853.612000] mrv8k: kickoff command (cf6fc630) [4294853.612000] mrv8k: mrv8k_interrupt: eth1 [4294853.612000] mrv8k: mrv8k_irq_tasklet: eth1 [4294853.612000] mrv8k: Interrupt Event fired [4294853.612000] mrv8k: mrv8k_irq_tasklet_events [4294853.612000] mrv8k: Received an event message type=802e len=000c [4294853.612000] mrv8k: Command SET_RTS_TRESHOLD. ACK len=12 threshold=2347 [4294854.614000] mrv8k: mrv8k_interrupt: eth1 [4294854.614000] mrv8k: mrv8k_irq_tasklet: eth1 [4294854.614000] mrv8k: Interrupt Rx Transfer received [4294854.614000] mrv8k: mrv8k_irq_event_rx_transfer [4294854.614000] mrv8k: write index=1, read_index=0 [4294854.614000] mrv8k: ctrl: datalen=126 rssi=-46 [4294854.614000] mrv8k: data: len=128 [4294854.614000] mrv8k: Received a ieee802.11 MGMT Frame, subtype invalid type 1 5, duration=0000 [4294854.614000] mrv8k: You have received an error: Rx Stuck! Reset RX and BBU ----------------------------------------------- It doens't work... -- No firmware for mrv8k https://launchpad.net/malone/bugs/36322 From keith at barnabasmusic.com Wed Apr 12 09:50:35 2006 From: keith at barnabasmusic.com (Geo_KM) Date: Wed, 12 Apr 2006 09:50:35 -0000 Subject: [Bug 39276] Fails to compile using config from dapper References: <20060412095035.24516.46392.malonedeb@gangotri.ubuntu.com> Message-ID: <20060412095035.24516.46392.malonedeb@gangotri.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: Compiling on a dapper machine using config-2.6.15-20-386 fails at CC [M] drivers/usb/net/zd1211/zdusb.o In file included from drivers/usb/net/zd1211/zdusb.c:41: drivers/usb/net/zd1211/zddevlist.h:7:2: error: #error "Error in source file, line 35" make[4]: *** [drivers/usb/net/zd1211/zdusb.o] Error 1 make[3]: *** [drivers/usb/net/zd1211] Error 2 make[2]: *** [drivers/usb/net] Error 2 make[1]: *** [drivers/usb] Error 2 make: *** [drivers] Error 2 -- Fails to compile using config from dapper https://launchpad.net/malone/bugs/39276 From hramrach at centrum.cz Wed Apr 12 11:08:53 2006 From: hramrach at centrum.cz (Michal Suchanek) Date: Wed, 12 Apr 2006 11:08:53 -0000 Subject: [Bug 38859] Re: The boot CD does not work on Cyrix References: <20060409115532.32233.49614.malonedeb@gandwana.ubuntu.com> Message-ID: <20060412110853.24516.45370.malone@gangotri.ubuntu.com> It is one of those chips that goes into Socket7 instead of Pentium (Classic). Are there more types of such stuff? Would /proc/cpuid output help you? I guess I could boot Knoppix and get that. -- The boot CD does not work on Cyrix https://launchpad.net/malone/bugs/38859 From andrew.callum at rogers.com Wed Apr 12 11:14:36 2006 From: andrew.callum at rogers.com (jacrider) Date: Wed, 12 Apr 2006 11:14:36 -0000 Subject: [Bug 36089] Re: After Kernel update (3/21/2006) no sound References: <20060323010921.24660.83604.malonedeb@gandwana.ubuntu.com> Message-ID: <20060412111436.32233.70667.malone@gandwana.ubuntu.com> andrew at DapperBox:~$ dmesg [4294667.296000] Linux version 2.6.15-20-386 (buildd at vernadsky) (gcc version 4.0.3 (Ubuntu 4.0.3-1ubuntu3)) #1 PREEMPT Tue Apr 4 17:48:51 UTC 2006 [4294667.296000] BIOS-provided physical RAM map: [4294667.296000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [4294667.296000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [4294667.296000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [4294667.296000] BIOS-e820: 0000000000100000 - 000000003ffb0000 (usable) [4294667.296000] BIOS-e820: 000000003ffb0000 - 000000003ffc0000 (ACPI data) [4294667.296000] BIOS-e820: 000000003ffc0000 - 000000003fff0000 (ACPI NVS) [4294667.296000] BIOS-e820: 000000003fff0000 - 0000000040000000 (reserved) [4294667.296000] BIOS-e820: 00000000ff7c0000 - 0000000100000000 (reserved) [4294667.296000] 127MB HIGHMEM available. [4294667.296000] 896MB LOWMEM available. [4294667.296000] found SMP MP-table at 000ff780 [4294667.296000] On node 0 totalpages: 262064 [4294667.296000] DMA zone: 4096 pages, LIFO batch:0 [4294667.296000] DMA32 zone: 0 pages, LIFO batch:0 [4294667.296000] Normal zone: 225280 pages, LIFO batch:31 [4294667.296000] HighMem zone: 32688 pages, LIFO batch:7 [4294667.296000] DMI 2.3 present. [4294667.296000] ACPI: RSDP (v000 ACPIAM ) @ 0x000f8350 [4294667.296000] ACPI: RSDT (v001 A M I OEMRSDT 0x09000513 MSFT 0x00000097) @ 0x3ffb0000 [4294667.296000] ACPI: FADT (v002 A M I OEMFACP 0x09000513 MSFT 0x00000097) @ 0x3ffb0200 [4294667.296000] ACPI: MADT (v001 A M I OEMAPIC 0x09000513 MSFT 0x00000097) @ 0x3ffb0390 [4294667.296000] ACPI: OEMB (v001 A M I AMI_OEM 0x09000513 MSFT 0x00000097) @ 0x3ffc0040 [4294667.296000] ACPI: DSDT (v001 A0385 A0385000 0x00000000 INTL 0x02002026) @ 0x00000000 [4294667.296000] ACPI: PM-Timer IO Port: 0x808 [4294667.296000] ACPI: Local APIC address 0xfee00000 [4294667.296000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [4294667.296000] Processor #0 15:4 APIC version 20 [4294667.296000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled) [4294667.296000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [4294667.296000] IOAPIC[0]: apic_id 1, version 3, address 0xfec00000, GSI 0-23 [4294667.296000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [4294667.296000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [4294667.296000] ACPI: IRQ0 used by override. [4294667.296000] ACPI: IRQ2 used by override. [4294667.296000] ACPI: IRQ9 used by override. [4294667.296000] Enabling APIC mode: Flat. Using 1 I/O APICs [4294667.296000] Using ACPI (MADT) for SMP configuration information [4294667.296000] Allocating PCI resources starting at 50000000 (gap: 40000000:bf7c0000) [4294667.296000] Built 1 zonelists [4294667.296000] Kernel command line: root=/dev/sda1 ro quiet splash [4294667.296000] mapped APIC to ffffd000 (fee00000) [4294667.296000] mapped IOAPIC to ffffc000 (fec00000) [4294667.296000] Initializing CPU#0 [4294667.296000] PID hash table entries: 4096 (order: 12, 65536 bytes) [4294667.296000] Detected 2935.160 MHz processor. [4294667.296000] Using pmtmr for high-res timesource [4294667.296000] Console: colour VGA+ 80x25 [4294667.393000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [4294667.394000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [4294667.424000] Memory: 1028816k/1048256k available (1973k kernel code, 18708k reserved, 601k data, 288k init, 130752k highmem) [4294667.424000] Checking if this processor honours the WP bit even in supervisor mode... Ok. [4294667.484000] Calibrating delay using timer specific routine.. 5872.45 BogoMIPS (lpj=2936225) [4294667.484000] Security Framework v1.0.0 initialized [4294667.484000] SELinux: Disabled at boot. [4294667.484000] Mount-cache hash table entries: 512 [4294667.484000] CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 0000441d 00000000 00000000 [4294667.484000] CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 0000441d 00000000 00000000 [4294667.484000] monitor/mwait feature present. [4294667.484000] using mwait in idle threads. [4294667.484000] CPU: Trace cache: 12K uops, L1 D cache: 16K [4294667.484000] CPU: L2 cache: 256K [4294667.484000] CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 0000441d 00000000 00000000 [4294667.484000] mtrr: v2.0 (20020519) [4294667.484000] CPU: Intel(R) Celeron(R) CPU 2.93GHz stepping 01 [4294667.484000] Enabling fast FPU save and restore... done. [4294667.484000] Enabling unmasked SIMD FPU exception support... done. [4294667.484000] Checking 'hlt' instruction... OK. [4294667.488000] checking if image is initramfs... it is [4294668.012000] Freeing initrd memory: 6388k freed [4294668.024000] ACPI: Looking for DSDT ... not found! [4294668.027000] ENABLING IO-APIC IRQs [4294668.027000] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [4294668.138000] NET: Registered protocol family 16 [4294668.138000] EISA bus registered [4294668.138000] ACPI: bus type pci registered [4294668.138000] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=1 [4294668.138000] PCI: Using configuration type 1 [4294668.139000] ACPI: Subsystem revision 20051216 [4294668.143000] ACPI: Interpreter enabled [4294668.143000] ACPI: Using IOAPIC for interrupt routing [4294668.144000] ACPI: PCI Root Bridge [PCI0] (0000:00) [4294668.144000] PCI: Probing PCI hardware (bus 00) [4294668.148000] Boot video device is 0000:01:00.0 [4294668.148000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [4294668.162000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [4294668.169000] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15) [4294668.169000] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15) [4294668.169000] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15) [4294668.170000] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [4294668.170000] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [4294668.170000] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [4294668.171000] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [4294668.171000] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [4294668.171000] Linux Plug and Play Support v0.97 (c) Adam Belay [4294668.171000] pnp: PnP ACPI init [4294668.176000] pnp: PnP ACPI: found 12 devices [4294668.176000] PnPBIOS: Disabled by ACPI PNP [4294668.176000] PCI: Using ACPI for IRQ routing [4294668.176000] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [4294668.184000] PCI: Bridge: 0000:00:01.0 [4294668.184000] IO window: disabled. [4294668.184000] MEM window: fca00000-feafffff [4294668.184000] PREFETCH window: d7f00000-f7efffff [4294668.184000] PCI: Setting latency timer of device 0000:00:01.0 to 64 [4294668.185000] audit: initializing netlink socket (disabled) [4294668.185000] audit(1144499060.184:1): initialized [4294668.185000] highmem bounce pool size: 64 pages [4294668.185000] VFS: Disk quotas dquot_6.5.1 [4294668.185000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [4294668.185000] Initializing Cryptographic API [4294668.185000] io scheduler noop registered [4294668.185000] io scheduler anticipatory registered [4294668.185000] io scheduler deadline registered [4294668.185000] io scheduler cfq registered [4294668.185000] PCI: Bypassing VIA 8237 APIC De-Assert Message [4294668.185000] isapnp: Scanning for PnP cards... [4294668.542000] isapnp: No Plug & Play device found [4294668.569000] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 [4294668.569000] serio: i8042 AUX port at 0x60,0x64 irq 12 [4294668.569000] serio: i8042 KBD port at 0x60,0x64 irq 1 [4294668.569000] Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled [4294668.569000] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [4294668.574000] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [4294668.574000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [4294668.574000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [4294668.574000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [4294668.574000] ACPI: bus type ide registered [4294668.575000] mice: PS/2 mouse device common for all mice [4294668.575000] EISA: Probing bus 0 at eisa.0 [4294668.575000] EISA: Detected 0 cards. [4294668.575000] NET: Registered protocol family 2 [4294668.585000] IP route cache hash table entries: 65536 (order: 6, 262144 bytes) [4294668.585000] TCP established hash table entries: 262144 (order: 8, 1048576 bytes) [4294668.587000] TCP bind hash table entries: 65536 (order: 6, 262144 bytes) [4294668.587000] TCP: Hash tables configured (established 262144 bind 65536) [4294668.587000] TCP reno registered [4294668.587000] TCP bic registered [4294668.587000] NET: Registered protocol family 1 [4294668.587000] NET: Registered protocol family 8 [4294668.587000] NET: Registered protocol family 20 [4294668.587000] Using IPI Shortcut mode [4294668.588000] ACPI wakeup devices: [4294668.588000] PCI0 PS2K PS2M UAR1 MC97 USB1 USB2 USB3 USB4 EHCI ILAN [4294668.588000] ACPI: (supports S0 S1 S3 S4 S5) [4294668.588000] Freeing unused kernel memory: 288k freed [4294668.608000] input: AT Translated Set 2 keyboard as /class/input/input0 [4294668.660000] vga16fb: initializing [4294668.660000] vga16fb: mapped to 0xc00a0000 [4294668.792000] Console: switching to colour frame buffer device 80x25 [4294668.792000] fb0: VGA16 VGA frame buffer device [4294669.814000] Capability LSM initialized [4294670.773000] SCSI subsystem initialized [4294670.775000] libata version 1.20 loaded. [4294670.777000] sata_via 0000:00:0f.0: version 1.1 [4294670.777000] ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 20 (level, low) -> IRQ 169 [4294670.777000] PCI: Via IRQ fixup for 0000:00:0f.0, from 11 to 9 [4294670.777000] sata_via 0000:00:0f.0: routed to hard irq line 9 [4294670.777000] ata1: SATA max UDMA/133 cmd 0xEC00 ctl 0xE882 bmdma 0xE400 irq 169 [4294670.777000] ata2: SATA max UDMA/133 cmd 0xE800 ctl 0xE482 bmdma 0xE408 irq 169 [4294671.132000] ata1: dev 0 cfg 49:2f00 82:7c6b 83:7f09 84:4003 85:7c69 86:3e01 87:4003 88:407f [4294671.132000] ata1: dev 0 ATA-7, max UDMA/133, 490234752 sectors: LBA48 [4294671.132000] ata1: dev 0 configured for UDMA/133 [4294671.132000] scsi0 : sata_via [4294671.333000] ata2: no device found (phy stat 00000000) [4294671.333000] scsi1 : sata_via [4294671.333000] Vendor: ATA Model: Maxtor 7Y250M0 Rev: YAR5 [4294671.333000] Type: Direct-Access ANSI SCSI revision: 05 [4294671.343000] SCSI device sda: 490234752 512-byte hdwr sectors (251000 MB) [4294671.343000] SCSI device sda: drive cache: write back [4294671.347000] SCSI device sda: 490234752 512-byte hdwr sectors (251000 MB) [4294671.347000] SCSI device sda: drive cache: write back [4294671.347000] sda: sda1 sda2 < sda5 sda6 sda7 > [4294671.388000] sd 0:0:0:0: Attached scsi disk sda [4294671.694000] VP_IDE: IDE controller at PCI slot 0000:00:0f.1 [4294671.694000] ACPI: PCI Interrupt 0000:00:0f.1[A] -> GSI 20 (level, low) -> IRQ 169 [4294671.694000] PCI: Via IRQ fixup for 0000:00:0f.1, from 255 to 9 [4294671.694000] VP_IDE: chipset revision 6 [4294671.694000] VP_IDE: not 100% native mode: will probe irqs later [4294671.694000] VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.1 [4294671.694000] ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:pio [4294671.694000] ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:pio, hdd:pio [4294671.694000] Probing IDE interface ide0... [4294672.488000] hda: SAMSUNG DVD-ROM SD-816B, ATAPI CD/DVD-ROM drive [4294672.794000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [4294672.794000] Probing IDE interface ide1... [4294673.323000] hda: ATAPI 48X DVD-ROM drive, 512kB Cache, UDMA(33) [4294673.323000] Uniform CD-ROM driver Revision: 3.20 [4294673.413000] usbcore: registered new driver usbfs [4294673.413000] usbcore: registered new driver hub [4294673.416000] USB Universal Host Controller Interface driver v2.3 [4294673.417000] ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 177 [4294673.417000] PCI: Via IRQ fixup for 0000:00:10.0, from 10 to 1 [4294673.417000] uhci_hcd 0000:00:10.0: UHCI Host Controller [4294673.418000] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1 [4294673.418000] uhci_hcd 0000:00:10.0: irq 177, io base 0x0000cc00 [4294673.420000] hub 1-0:1.0: USB hub found [4294673.420000] hub 1-0:1.0: 2 ports detected [4294673.521000] ACPI: PCI Interrupt 0000:00:10.1[A] -> GSI 21 (level, low) -> IRQ 177 [4294673.521000] PCI: Via IRQ fixup for 0000:00:10.1, from 10 to 1 [4294673.521000] uhci_hcd 0000:00:10.1: UHCI Host Controller [4294673.521000] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2 [4294673.521000] uhci_hcd 0000:00:10.1: irq 177, io base 0x0000d000 [4294673.521000] hub 2-0:1.0: USB hub found [4294673.521000] hub 2-0:1.0: 2 ports detected [4294673.622000] ACPI: PCI Interrupt 0000:00:10.2[B] -> GSI 21 (level, low) -> IRQ 177 [4294673.622000] PCI: Via IRQ fixup for 0000:00:10.2, from 11 to 1 [4294673.622000] uhci_hcd 0000:00:10.2: UHCI Host Controller [4294673.622000] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3 [4294673.622000] uhci_hcd 0000:00:10.2: irq 177, io base 0x0000d080 [4294673.622000] hub 3-0:1.0: USB hub found [4294673.622000] hub 3-0:1.0: 2 ports detected [4294673.723000] ACPI: PCI Interrupt 0000:00:10.3[B] -> GSI 21 (level, low) -> IRQ 177 [4294673.723000] PCI: Via IRQ fixup for 0000:00:10.3, from 11 to 1 [4294673.723000] uhci_hcd 0000:00:10.3: UHCI Host Controller [4294673.723000] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4 [4294673.723000] uhci_hcd 0000:00:10.3: irq 177, io base 0x0000dc00 [4294673.723000] hub 4-0:1.0: USB hub found [4294673.723000] hub 4-0:1.0: 2 ports detected [4294673.828000] ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 21 (level, low) -> IRQ 177 [4294673.828000] PCI: Via IRQ fixup for 0000:00:10.4, from 5 to 1 [4294673.828000] ehci_hcd 0000:00:10.4: EHCI Host Controller [4294673.828000] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 5 [4294673.828000] ehci_hcd 0000:00:10.4: irq 177, io mem 0xfebff800 [4294673.828000] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [4294673.829000] hub 5-0:1.0: USB hub found [4294673.829000] hub 5-0:1.0: 8 ports detected [4294673.951000] Probing IDE interface ide1... [4294674.510000] Attempting manual resume [4294674.545000] EXT3-fs: mounted filesystem with ordered data mode. [4294674.553000] kjournald starting. Commit interval 5 seconds [4294681.634000] sd 0:0:0:0: Attached scsi generic sg0 type 0 [4294683.223000] Linux agpgart interface v0.101 (c) Dave Jones [4294683.225000] agpgart: Detected VIA P4M800CE chipset [4294683.230000] agpgart: AGP aperture is 64M @ 0xf8000000 [4294684.009000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [4294684.029000] ieee1394: Initialized config rom entry `ip1394' [4294684.031000] ohci1394: $Rev: 1313 $ Ben Collins [4294684.031000] ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 18 (level, low) -> IRQ 185 [4294684.031000] PCI: Via IRQ fixup for 0000:00:0a.0, from 5 to 9 [4294684.085000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[185] MMIO=[febff000-febff7ff] Max Packet=[2048] [4294684.093000] input: PC Speaker as /class/input/input1 [4294684.164000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [4294684.190000] Real Time Clock Driver v1.12 [4294684.282000] via82xx: Assuming DXS channels with 48k fixed sample rate. [4294684.282000] Please try dxs_support=5 option [4294684.282000] and report if it works on your machine. [4294684.282000] For more details, read ALSA-Configuration.txt. [4294684.282000] ACPI: PCI Interrupt 0000:00:11.5[C] -> GSI 22 (level, low) -> IRQ 193 [4294684.282000] PCI: Via IRQ fixup for 0000:00:11.5, from 5 to 1 [4294684.282000] PCI: Setting latency timer of device 0000:00:11.5 to 64 [4294684.400000] via-rhine.c:v1.10-LK1.2.0-2.6 June-10-2004 Written by Donald Becker [4294684.410000] parport: PnPBIOS parport detected. [4294684.410000] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA] [4294684.597000] nvidia: module license 'NVIDIA' taints kernel. [4294684.619000] FDC 0 is a post-1991 82077 [4294684.669000] input: PS2++ Logitech Wheel Mouse as /class/input/input2 [4294684.684000] ts: Compaq touchscreen protocol output [4294684.809000] ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 23 (level, low) -> IRQ 201 [4294684.809000] PCI: Via IRQ fixup for 0000:00:12.0, from 10 to 9 [4294684.810000] eth0: VIA Rhine II at 0x1d800, 00:13:d4:fe:a3:be, IRQ 201. [4294684.810000] eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 41e1. [4294684.810000] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 209 [4294684.811000] NVRM: loading NVIDIA Linux x86 NVIDIA Kernel Module 1.0-8178 Wed Dec 14 16:22:51 PST 2005 [4294685.094000] eth0: link up, 100Mbps, full-duplex, lpa 0x41E1 [4294685.327000] lp0: using parport0 (interrupt-driven). [4294685.356000] sbp2: $Rev: 1306 $ Ben Collins [4294685.356000] ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1)[4294685.356000] ieee1394: sbp2: Try serialize_io=0 for better performance [4294685.411000] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00110666400004a7][4294685.467000] Adding 3028212k swap on /dev/sda5. Priority:-1 extents:1 across:3028212k [4294685.604000] EXT3 FS on sda1, internal journal [4294685.751000] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 [4294685.751000] md: bitmap version 4.39 [4294686.363000] NET: Registered protocol family 17 [4294686.443000] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel at redhat.com [4294686.961000] cdrom: open failed. [4294688.782000] ACPI: Power Button (FF) [PWRF] [4294688.782000] ACPI: Power Button (CM) [PWRB] [4294688.889000] ibm_acpi: ec object not found [4294688.914000] pcc_acpi: loading... [4294689.942000] NET: Registered protocol family 10 [4294689.943000] lo: Disabled Privacy Extensions [4294689.943000] IPv6 over IPv4 tunneling driver [4294695.511000] agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0. [4294695.511000] agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode [4294695.511000] agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode [4294695.736000] agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0. [4294695.736000] agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode [4294695.736000] agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode [4294697.072000] apm: BIOS version 1.2 Flags 0x02 (Driver version 1.16ac) [4294697.072000] apm: overridden by ACPI. [4294697.403000] hda: drive_cmd: status=0x51 { DriveReady SeekComplete Error } [4294697.403000] hda: drive_cmd: error=0x04 { AbortedCommand } [4294697.403000] ide: failed opcode was: 0xec [4294697.523000] hda: drive_cmd: status=0x51 { DriveReady SeekComplete Error } [4294697.523000] hda: drive_cmd: error=0x04 { AbortedCommand } [4294697.523000] ide: failed opcode was: 0xec [4294698.759000] Bluetooth: Core ver 2.8 [4294698.759000] NET: Registered protocol family 31 [4294698.759000] Bluetooth: HCI device and connection manager initialized [4294698.759000] Bluetooth: HCI socket layer initialized [4294698.842000] Bluetooth: L2CAP ver 2.8 [4294698.842000] Bluetooth: L2CAP socket layer initialized [4294698.846000] Bluetooth: RFCOMM socket layer initialized [4294698.846000] Bluetooth: RFCOMM TTY layer initialized [4294698.846000] Bluetooth: RFCOMM ver 1.7 [4294700.073000] eth0: no IPv6 routers present [4378200.805000] ibm_acpi: ec object not found andrew at DapperBox:~$ alsamixer alsamixer: function snd_ctl_open failed for default: No such device andrew at DapperBox:~$ cat /proc/asound/modules 0 snd_via82xx I have no idea why snd_seq_dummy 3844 0 is loading. Nor do I know how it is loaded. I haven't manually done this. As a further piece of information, when booting the machine, I do get the Ubuntu "drum-sound" that comes when the login screen displays, but I don't get any sound after I log in. Many thanks for looking at this. Andrew. -- After Kernel update (3/21/2006) no sound https://launchpad.net/malone/bugs/36089 From andrew.callum at rogers.com Wed Apr 12 11:16:44 2006 From: andrew.callum at rogers.com (jacrider) Date: Wed, 12 Apr 2006 11:16:44 -0000 Subject: [Bug 36089] Re: [Bug 36089] Re: After Kernel update (3/21/2006) no sound References: <20060323010921.24660.83604.malonedeb@gandwana.ubuntu.com> <20060411184725.24486.9244.malone@gangotri.ubuntu.com> Message-ID: <20060412111644.74941.qmail@web88102.mail.re2.yahoo.com> Thanks for looking at this, I have posted the requested outputs. Andrew. --- Matt Zimmerman wrote: > Please attach dmesg output and amixer output > > ** Changed in: linux-source-2.6.15 > linux-image-2.6.15-19-386 (Ubuntu) > Status: Unconfirmed => Needs Info > -- > After Kernel update (3/21/2006) no sound > https://launchpad.net/malone/bugs/36089 > -- After Kernel update (3/21/2006) no sound https://launchpad.net/malone/bugs/36089 From kozz at pegasos.org Wed Apr 12 11:34:53 2006 From: kozz at pegasos.org (kozz) Date: Wed, 12 Apr 2006 11:34:53 -0000 Subject: [Bug 34817] Re: Bttv radio tuner just gives noise References: <20060313214024.30082.68440.malonedeb@gandwana.ubuntu.com> Message-ID: <20060412113453.24486.94562.malone@gangotri.ubuntu.com> Hmm, it seems to be working now but I actually don't know what solved it. Might be a combination of several things. Kopete has in recent versions support for webcam and finds my tv-card as a possible video/audio source. Upon start it does however break the radio if I have it running. Also if I first starts kopete and then tries to set the frequency on the radio all I get is noise. Entering the config in kopete and pressing ok and then try to set the frequency on the radio makes it work again. Also might have been some lockup in the card, because I pulled the powercable from the computer yesterday the other day when I cleaned the room which resetted the card totally. Also, I'm working on a small radio tuner myself with might have misconfigured the card a bit. Even if I used the radio tuner that comes with xawtv to make the testing when stuff didn't work. Guess a combination of all this gave the problems. Anyway, I have tested with 2.6.15-19 and 2.6.15-20 now an both works. -- Bttv radio tuner just gives noise https://launchpad.net/malone/bugs/34817 From bboissin at ens-lyon.fr Wed Apr 12 12:01:17 2006 From: bboissin at ens-lyon.fr (tonfa) Date: Wed, 12 Apr 2006 12:01:17 -0000 Subject: [Bug 38912] Re: Broadcom Woes with +1 GB of RAM References: <20060409182146.32313.33245.malonedeb@gandwana.ubuntu.com> Message-ID: <20060412120117.24486.12654.launchpad@gangotri.ubuntu.com> *** This bug is a duplicate of bug 33024 *** ** This bug has been marked a duplicate of bug 33024 bcm43xx driver trying to allocate DMA memory above 1G -- Broadcom Woes with +1 GB of RAM https://launchpad.net/malone/bugs/38912 From bboissin at ens-lyon.fr Wed Apr 12 12:01:17 2006 From: bboissin at ens-lyon.fr (tonfa) Date: Wed, 12 Apr 2006 12:01:17 -0000 Subject: [Bug 33024] Re: bcm43xx driver trying to allocate DMA memory above 1G References: <20060227101031.16580.69564.malonedeb@gandwana.ubuntu.com> Message-ID: <20060412120117.24486.56308.launchpad@gangotri.ubuntu.com> ** Bug 38912 has been marked a duplicate of this bug -- bcm43xx driver trying to allocate DMA memory above 1G https://launchpad.net/malone/bugs/33024 From bboissin at ens-lyon.fr Wed Apr 12 12:11:58 2006 From: bboissin at ens-lyon.fr (tonfa) Date: Wed, 12 Apr 2006 12:11:58 -0000 Subject: [Bug 33024] Re: bcm43xx driver trying to allocate DMA memory above 1G References: <20060227101031.16580.69564.malonedeb@gandwana.ubuntu.com> Message-ID: <20060412121158.24516.76851.malone@gangotri.ubuntu.com> Hi, I think this bug should be reopened (though I don't know ubuntu bugzilla policies so I don't know what status I should put). Nicholas was probably using x86, but this still affects powerpc users. The problem is that the dma engine from the Broadcom card cannot address memory above 1G. The driver correctly set the dma_mask to DMA30BITS_MASK. But the ppc dma handling code (in contrary to x86) doesn't respect this. The main reason is because ppc doesn't have different zone like DMA_ZONE so there is no reserved space below 1G. The issue was reported upstream, see this thread: http://lkml.org/lkml/2006/4/10/3 So benh will work on this. It may be worth following it and if the changes are not big backporting it to the ubuntu kernel. (otherwise all the ppc64 users with >1G RAM won't have a usable airport). -- bcm43xx driver trying to allocate DMA memory above 1G https://launchpad.net/malone/bugs/33024 From ben.collins at ubuntu.com Wed Apr 12 12:54:08 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Wed, 12 Apr 2006 12:54:08 -0000 Subject: [Bug 29238] Re: Ambiguous oops in Yenta driver References: <20060120222049.16602.45571.malonedeb@gandwana.ubuntu.com> Message-ID: <20060412125408.24486.34583.malone@gangotri.ubuntu.com> I'll reject it for now. If someone can reproduce this, then please set the status to confirmed and provide the requested info. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Needs Info => Rejected -- Ambiguous oops in Yenta driver https://launchpad.net/malone/bugs/29238 From ben.collins at ubuntu.com Wed Apr 12 12:51:33 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Wed, 12 Apr 2006 12:51:33 -0000 Subject: [Bug 27421] Re: Logitech RX300 mouse extra-buttons without kernel events References: <20060113145426.21012.68118.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060412125133.32233.35030.malone@gandwana.ubuntu.com> Please attach the complete log. It will atleast tell me some info about the device and what the kernel is seeing. -- Logitech RX300 mouse extra-buttons without kernel events https://launchpad.net/malone/bugs/27421 From ben.collins at ubuntu.com Wed Apr 12 13:00:51 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Wed, 12 Apr 2006 13:00:51 -0000 Subject: [Bug 33162] Re: Acer Travel Mate 3210 needs acpi=off References: <20060228154534.17498.22123.malonedeb@gangotri.ubuntu.com> Message-ID: <20060412130051.32233.8950.malone@gandwana.ubuntu.com> Thanks for testing. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Unconfirmed => Fix Released -- Acer Travel Mate 3210 needs acpi=off https://launchpad.net/malone/bugs/33162 From ben.collins at ubuntu.com Wed Apr 12 13:09:27 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Wed, 12 Apr 2006 13:09:27 -0000 Subject: [Bug 34817] Re: Bttv radio tuner just gives noise References: <20060313214024.30082.68440.malonedeb@gandwana.ubuntu.com> Message-ID: <20060412130927.24516.10177.launchpad@gangotri.ubuntu.com> ** Changed in: linux-source-2.6.15 linux-image-2.6.15-17-powerpc (Ubuntu) Status: Unconfirmed => Fix Released -- Bttv radio tuner just gives noise https://launchpad.net/malone/bugs/34817 From ben.collins at ubuntu.com Wed Apr 12 13:07:12 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Wed, 12 Apr 2006 13:07:12 -0000 Subject: [Bug 34781] Re: [Dapper] boot fails on HP Pavilion dv5000 References: <20060313160554.17044.88668.malonedeb@gangotri.ubuntu.com> Message-ID: <20060412130713.32233.2284.malone@gandwana.ubuntu.com> Excellent. Thanks for checking into that. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Unconfirmed => Rejected ** Changed in: linux-meta (Ubuntu) Status: Unconfirmed => Rejected -- [Dapper] boot fails on HP Pavilion dv5000 https://launchpad.net/malone/bugs/34781 From re2824 at safe-mail.net Wed Apr 12 13:10:12 2006 From: re2824 at safe-mail.net (Jaime) Date: Wed, 12 Apr 2006 13:10:12 -0000 Subject: [Bug 37324] Re: acpi breaks MPU-401 UART gameport midi on Asus K7S8X References: <20060330122854.5415.26647.malonedeb@gangotri.ubuntu.com> Message-ID: <20060412131012.32313.19952.malone@gandwana.ubuntu.com> That's fixed the problem. The (midi) device now appears and works correctly. Could you please close this bug, as I can't. Thank you. -- acpi breaks MPU-401 UART gameport midi on Asus K7S8X https://launchpad.net/malone/bugs/37324 From ben.collins at ubuntu.com Wed Apr 12 13:14:37 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Wed, 12 Apr 2006 13:14:37 -0000 Subject: [Bug 35215] Re: ipw3945 driver required for functionality on new Intel PRO/Wireless 3945ABG Mini-PCI Express Adapters References: <20060316173707.11105.89035.malonedeb@gandwana.ubuntu.com> Message-ID: <20060412131437.32313.2247.malone@gandwana.ubuntu.com> As noted in the "status", this is in progress. It is planned for the next kernel release. So no further info is needed until that upload is done. -- ipw3945 driver required for functionality on new Intel PRO/Wireless 3945ABG Mini-PCI Express Adapters https://launchpad.net/malone/bugs/35215 From ben.collins at ubuntu.com Wed Apr 12 13:15:18 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Wed, 12 Apr 2006 13:15:18 -0000 Subject: [Bug 35492] Re: "Cannot enable port 1. Maybe the USB cable is bad?" with usb mouse on toshiba laptop References: <20060318190809.26236.8241.malonedeb@gangotri.ubuntu.com> Message-ID: <20060412131519.24516.32165.launchpad@gangotri.ubuntu.com> ** Changed in: hotplug (Ubuntu) Status: Unconfirmed => Rejected -- "Cannot enable port 1. Maybe the USB cable is bad?" with usb mouse on toshiba laptop https://launchpad.net/malone/bugs/35492 From ben.collins at ubuntu.com Wed Apr 12 13:23:17 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Wed, 12 Apr 2006 13:23:17 -0000 Subject: [Bug 36128] Re: Latest kernel upgrade doesn't boot on Acer Travelmate 8000 References: <20060323103500.18321.67319.malonedeb@gandwana.ubuntu.com> Message-ID: <20060412132317.24486.17571.launchpad@gangotri.ubuntu.com> ** Changed in: linux-source-2.6.15 kernel-image-2.6.15-19-386-di (Ubuntu) Status: Needs Info => Fix Released -- Latest kernel upgrade doesn't boot on Acer Travelmate 8000 https://launchpad.net/malone/bugs/36128 From ben.collins at ubuntu.com Wed Apr 12 13:22:37 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Wed, 12 Apr 2006 13:22:37 -0000 Subject: [Bug 36119] Re: external usb keyboard dead after suspend/resume References: <20060323090614.10163.64654.malonedeb@gangotri.ubuntu.com> Message-ID: <20060412132237.24516.55046.malone@gangotri.ubuntu.com> Please try flight6, or upgrade your system to the latest dapper. -- external usb keyboard dead after suspend/resume https://launchpad.net/malone/bugs/36119 From launchpad at psifertex.com Wed Apr 12 14:30:43 2006 From: launchpad at psifertex.com (psifertex) Date: Wed, 12 Apr 2006 14:30:43 -0000 Subject: [Bug 36339] Re: USB mouse does not work if usbhid loaded before plugging in References: <20060324035730.5352.52525.malonedeb@gangotri.ubuntu.com> Message-ID: <20060412143042.31677.17711.malone@gandwana.ubuntu.com> Thanks! Commenting out usbkbd and usbmouse and adding usbhid worked for me. I don't really know the "why" of it, or if this is a better solution long-term, but it's working for me now, so it meets my needs. :-) -- USB mouse does not work if usbhid loaded before plugging in https://launchpad.net/malone/bugs/36339 From pejuaxel at gmail.com Wed Apr 12 14:58:59 2006 From: pejuaxel at gmail.com (Axel) Date: Wed, 12 Apr 2006 14:58:59 -0000 Subject: [Bug 34326] WPC54GS instead of WRT54GS References: <20060310162449.30057.9038.malonedeb@gandwana.ubuntu.com> Message-ID: <20060412145859.15436.98283.launchpad@canonical@gangotri.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Major Priority: Medium Status: Confirmed Description: Ubuntu Dapper recognized my wifi PCI card WMP54GS as a PCMCIA card WPC54GS. I cannot use it anymore. It used to work with ndiswrapper so if there is not any driver yet for WMP54GS, it would be nice not to configure it with WPC54GS drivers and let ndiswrapper + windows inf files do the job. Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Major Priority: Medium Status: Confirmed Description: Ubuntu Dapper recognized my wifi PCI card WMP54GS as a PCMCIA card WPC54GS. I cannot use it anymore. It used to work with ndiswrapper so if there is not any driver yet for WMP54GS, it would be nice not to configure it with WPC54GS drivers and let ndiswrapper + windows inf files do the job. -- WPC54GS instead of WRT54GS https://launchpad.net/malone/bugs/34326 From mail at slomosnail.de Wed Apr 12 14:54:57 2006 From: mail at slomosnail.de (=?utf-8?q?Sebastian_Dr=C3=B6ge?=) Date: Wed, 12 Apr 2006 14:54:57 -0000 Subject: [Bug 37127] Re: i915 DRI driver seems to get the z-buffer backward References: <20060329065834.6253.91226.malonedeb@gandwana.ubuntu.com> Message-ID: <20060412145457.31651.8951.malone@gandwana.ubuntu.com> *** This bug is a duplicate of bug 22045 *** As this was just a duplicate of bug #22045 which is fixed now I'll close this. ** Changed in: gnome-screensaver (Ubuntu) Status: Needs Info => Fix Released -- i915 DRI driver seems to get the z-buffer backward https://launchpad.net/malone/bugs/37127 From avilella at gmail.com Wed Apr 12 14:56:24 2006 From: avilella at gmail.com (Albert Vilella) Date: Wed, 12 Apr 2006 14:56:24 -0000 Subject: [Bug 39307] Sonypi motioneye camera not recognized References: <20060412145624.15436.52451.malonedeb@gangotri.ubuntu.com> Message-ID: <20060412145624.15436.52451.malonedeb@gangotri.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: This may be a long shot, but the maybe something can be done to get the integrated video camera to work. sonypi doesn't recognize the motioneye camera by default: [4294702.453000] sonypi: Sony Programmable I/O Controller Driverv1.26. [4294702.454000] sonypi: detected type2 model, verbose = 0, fnkeyinit = off, camera = off, compat = off, mask = 0xffffffff, useinput = on, acpi = on [4294702.454000] sonypi: enabled at irq=11, port1=0x1080, port2=0x1084 [4294702.454000] sonypi: device allocated minor is 61 Although apparently it should be doable, via motioneye (via sonypi): http://popies.net/meye/ This is a USB Micro Vision camera. Attached are the details from the inf Windows driver file. ** Attachment added: "Hardware information file from Windows drivers" http://librarian.launchpad.net/2060876/README.windows.Mvc25U870.inf -- Sonypi motioneye camera not recognized https://launchpad.net/malone/bugs/39307 From ivan.matveich at gmail.com Wed Apr 12 14:55:23 2006 From: ivan.matveich at gmail.com (Ivan Matveich) Date: Wed, 12 Apr 2006 14:55:23 -0000 Subject: [Bug 37765] Re: [bcm43xx] No matter what it simply will not connect. It scan and sees the networks, but it cannot connect. References: <20060402194212.5415.86136.malonedeb@gangotri.ubuntu.com> Message-ID: <20060412145523.31651.90254.malone@gandwana.ubuntu.com> Try running "iwlist scan" now. That's what makes mine start working. -- [bcm43xx] No matter what it simply will not connect. It scan and sees the networks, but it cannot connect. https://launchpad.net/malone/bugs/37765 From cjwatson at canonical.com Wed Apr 12 14:58:58 2006 From: cjwatson at canonical.com (Colin Watson) Date: Wed, 12 Apr 2006 14:58:58 -0000 Subject: [Bug 34326] Re: WPC54GS instead of WRT54GS References: <20060310162449.30057.9038.malonedeb@gandwana.ubuntu.com> Message-ID: <20060412145858.15436.11121.launchpad@gangotri.ubuntu.com> ** Changed in: base-config (Ubuntu) Sourcepackagename: base-config => linux-source-2.6.15 Binarypackagename: base-config => None -- WPC54GS instead of WRT54GS https://launchpad.net/malone/bugs/34326 From stelian at popies.net Wed Apr 12 15:12:47 2006 From: stelian at popies.net (stelian) Date: Wed, 12 Apr 2006 15:12:47 -0000 Subject: [Bug 39307] Re: Sonypi motioneye camera not recognized References: <20060412145624.15436.52451.malonedeb@gangotri.ubuntu.com> Message-ID: <20060412151247.31677.53585.malone@gandwana.ubuntu.com> Sonypi does not do any webcam recognision at all. The 'camera' parameter is supposed to be set *by the user* if he wants sonypi to do some magical voodoo in order to turn on the motion eye camera. Also, do read Documentation/video4linux/meye.txt in the kernel source. You'll find out that the meye driver works only with a specific generation of motion eye cameras (the PCI ones you'll find on C1VM/N/E Sony Vaio Picturebooks). All the other motion eye cameras are unsupported and will require a full driver to be written for (unless they are based on some common chipset which is supported by a "standard" webcam driver - pwc for example). -- Sonypi motioneye camera not recognized https://launchpad.net/malone/bugs/39307 From ryanvw1st at yahoo.com Wed Apr 12 15:36:05 2006 From: ryanvw1st at yahoo.com (ryan) Date: Wed, 12 Apr 2006 15:36:05 -0000 Subject: [Bug 26859] Re: [Bug 26859] Re: general: 2.6.12-10 regressions from 2.6.12-9 References: <20060113145140.21012.69410.launchpad@macquarie.warthogs.hbd.com> <20060412053903.24486.32922.malone@gangotri.ubuntu.com> Message-ID: <20060412153605.61107.qmail@web54602.mail.yahoo.com> Hai Fabio, I don't know about the K8 troubles, however I do know about the K7 troubles with 2.6.12-10(k7) and with 2.6.12-10(386). I have been installing more stuff (also Sun Java, Konquerer, Krusader, Opera, Realplayer10, etc) on my ubuntu (Breezy) AthlonXP 2600+ ws and I still will have system freezing/system hangs events whenever I run a 2.6.12-10 kernel! However on kernel 2.6.12-9(k7) it runs stable and without problems, which I definitely prefer ! my Breezy Badger was updated online from Hoary Hedgehog, some small Dapper tools are in there too. I take all the automatic updates that come by.. I use this system as an actual ws so I rather don't do 'experimental stuff' with it, other than updates and installs that I need. I will however try any reworked 2.6.12-10 kernel to see if it is stable when it comes available for apt-get.. ofcourse soon now, Dapper will be out and I will then upgrade to the 2.6.15-6? kernel. Hope it works ;) Thanks for your efforts! Ryan van Wijngaarden netherlands --- Fabio Massimo Di Nitto wrote: > > > Hi everybody again, > > I still have 2 kernels for you to test here > (amd64-k8 and k8-smp) > and nobody did asnwer my request for information. > Should I assume this problem is gone automatically? > > please test and let me know. > > Thanks > Fabio > > -- > general: 2.6.12-10 regressions from 2.6.12-9 > https://launchpad.net/malone/bugs/26859 > __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com -- general: 2.6.12-10 regressions from 2.6.12-9 https://launchpad.net/malone/bugs/26859 From jbailey at ubuntu.com Wed Apr 12 15:45:02 2006 From: jbailey at ubuntu.com (Jeff Bailey) Date: Wed, 12 Apr 2006 15:45:02 -0000 Subject: [Bug 36947] Re: linux-image-2.6.15-19-powerpc64-smp unable to print to USB printer Lexmark E270 References: <20060328030528.20514.75682.malonedeb@gangotri.ubuntu.com> Message-ID: <20060412154502.15408.41286.malone@gangotri.ubuntu.com> I may try to hack on this over the long weekend. Notes from BenC (they may as well be public, posted with consent) ok, in drivers/usb/class/usblp.c there's a usblp_ioctl() it's used in the file_operations struct in drivers/acpi/dev_acpi.c there's an example of an additional compat_ioctl for the file_ops struct any ioctl's that pass data that is the same for 32-bit and 64-bit (typedef'd values like u32, int's, structures that contain compatible members, etc) are just compatible and can be passed directly anything that has incompatible values (long's, pointers, etc) need to be translated -- linux-image-2.6.15-19-powerpc64-smp unable to print to USB printer Lexmark E270 https://launchpad.net/malone/bugs/36947 From lists at whitehouse.org.nz Wed Apr 12 15:56:21 2006 From: lists at whitehouse.org.nz (Aaron Whitehouse) Date: Wed, 12 Apr 2006 15:56:21 -0000 Subject: [Bug 36570] Volume applet: In Dapper, Master does not control Headphones References: <20060325121436.6253.55749.malonedeb@gandwana.ubuntu.com> Message-ID: <20060412155621.31651.9331.launchpad@canonical@gandwana.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: In Progress Description: I just upgraded to Dapper Flight 5. I have "Volume Applet 2.14.0". I have inbuilt laptop speakers and a set of headphones. Under Breezy the volume applet controlled both perfectly. The hotkeys also worked for both (do they just talk to the applet anyway?). Now, in Dapper, the applet is set to control "Master" but only changes the volume (or mutes) the laptop speakers and has no effect on headphones. If I change the preferences and set the applet to control the headphones only, then it works (obviously only for the headphones). The hotkeys do not work for the headphones, even if I change the applet to control 'headphones'. Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: In Progress Description: I just upgraded to Dapper Flight 5. I have "Volume Applet 2.14.0". I have inbuilt laptop speakers and a set of headphones. Under Breezy the volume applet controlled both perfectly. The hotkeys also worked for both (do they just talk to the applet anyway?). Now, in Dapper, the applet is set to control "Master" but only changes the volume (or mutes) the laptop speakers and has no effect on headphones. If I change the preferences and set the applet to control the headphones only, then it works (obviously only for the headphones). The hotkeys do not work for the headphones, even if I change the applet to control 'headphones'. -- Volume applet: In Dapper, Master does not control Headphones https://launchpad.net/malone/bugs/36570 From crimsun at fungus.sh.nu Wed Apr 12 15:54:21 2006 From: crimsun at fungus.sh.nu (Daniel T. Chen) Date: Wed, 12 Apr 2006 15:54:21 -0000 Subject: [Bug 38546] Re: Add hp_only quirk for pci id [161f:2032] to via82xx ALSA driver References: <20060407061807.32233.31706.malonedeb@gandwana.ubuntu.com> Message-ID: <20060412155421.31677.54881.launchpad@gandwana.ubuntu.com> ** Bug 36570 has been marked a duplicate of this bug -- Add hp_only quirk for pci id [161f:2032] to via82xx ALSA driver https://launchpad.net/malone/bugs/38546 From crimsun at fungus.sh.nu Wed Apr 12 15:56:20 2006 From: crimsun at fungus.sh.nu (Daniel T. Chen) Date: Wed, 12 Apr 2006 15:56:20 -0000 Subject: [Bug 36570] Re: Volume applet: In Dapper, Master does not control Headphones References: <20060325121436.6253.55749.malonedeb@gandwana.ubuntu.com> Message-ID: <20060412155621.31651.21324.malone@gandwana.ubuntu.com> *** This bug is a duplicate of bug 38546 *** Aaron, please attach (not inline) output from ``lspci -v && lspci -nv'', thanks. ** This bug has been marked a duplicate of bug 38546 Add hp_only quirk for pci id [161f:2032] to via82xx ALSA driver ** Changed in: alsa-utils (Ubuntu) Sourcepackagename: alsa-utils => linux-source-2.6.15 Assignee: Martin Pitt => (unassigned) Status: Unconfirmed => In Progress ** Changed in: linux-source-2.6.15 (Ubuntu) Status: In Progress => Needs Info -- Volume applet: In Dapper, Master does not control Headphones https://launchpad.net/malone/bugs/36570 From viriiguy at gmail.com Wed Apr 12 16:03:07 2006 From: viriiguy at gmail.com (ViriiGuy) Date: Wed, 12 Apr 2006 16:03:07 -0000 Subject: [Bug 37765] Re: [bcm43xx] No matter what it simply will not connect. It scan and sees the networks, but it cannot connect. References: <20060402194212.5415.86136.malonedeb@gangotri.ubuntu.com> Message-ID: <20060412160307.31677.33296.malone@gandwana.ubuntu.com> Running iwlist scan makes no differance for me. I tried today with a WEP network, and no luck. It will not authenticate. My Dmesg reports, [4297010.801000] printk: 2 messages suppressed. [4297010.801000] SoftMAC: Can't perform deauthentication, network is not authenticated. So as it stands I can connect to a open system, but cannot get an IP from it still. And the signal reports as zero. I still cannot connect to a WEP at all. Thanks, Randy -- [bcm43xx] No matter what it simply will not connect. It scan and sees the networks, but it cannot connect. https://launchpad.net/malone/bugs/37765 From aetherane at gmail.com Wed Apr 12 16:17:31 2006 From: aetherane at gmail.com (Benjamin Prosnitz) Date: Wed, 12 Apr 2006 16:17:31 -0000 Subject: [Bug 34870] Re: [Bug 34870] Re: ipw2200 repeatedly crashes. References: <20060314104909.30082.87848.malonedeb@gandwana.ubuntu.com> <20060411055115.32233.44298.malone@gandwana.ubuntu.com> Message-ID: I have had many freezes after things haven't been written to the message log for a while, so there aren't really any messages that I can directly relate to the freezing. Earlier, I was completing a file transfer via ftp when it froze and I noticed that even after it froze it appeared to be still copying files from my network drive. On 4/11/06, Ante Karamatić wrote: > > In Benjamin's logs I noticed: > > Mar 27 09:39:10 amidrine kernel: [4296418.581000] ide: failed opcode was: > unknown > Mar 27 09:39:10 amidrine kernel: [4296418.581000] end_request: I/O error, > dev hda, sector 64 > Mar 27 09:39:10 amidrine kernel: [4296418.581000] isofs_fill_super: bread > failed, dev=hda, iso_blknum=16, block=16 > > In Laestrygo's logs there is: > > Apr 8 12:16:36 localhost kernel: [4296623.801000] end_request: I/O error, > dev hdc, sector 9098316 > Apr 8 12:16:36 localhost kernel: [4296623.803000] end_request: I/O error, > dev hdc, sector 9097808 > Apr 8 12:16:36 localhost kernel: [4296623.803000] end_request: I/O error, > dev hdc, sector 9097812 > > In Skort's logs kernel dies randomly on random errors. He acctually > doesn't even use Ubuntu kernel, but his own. You can notice that most of the > time when kernel dies, wifi-card is turned off (pw2200: Radio Frequency Kill > Switch is On) > > I doubt this is ipw2200 problem, but something bad related to disks (at > least in first two cases). I have ipw2200 and 72h uptime. > -- > ipw2200 repeatedly crashes. > https://launchpad.net/malone/bugs/34870 > -- ipw2200 repeatedly crashes. https://launchpad.net/malone/bugs/34870 From herve at lucidia.net Wed Apr 12 16:29:10 2006 From: herve at lucidia.net (=?utf-8?q?Herv=C3=A9_Fache?=) Date: Wed, 12 Apr 2006 16:29:10 -0000 Subject: [Bug 33085] Re: [Dapper Flight 4] Not compile kernel source of package of Ubuntu References: <20060227221929.16580.8980.malonedeb@gandwana.ubuntu.com> Message-ID: <20060412162910.15408.34525.malone@gangotri.ubuntu.com> Not enough. Need to install gawk, then delete the partial drivers/usb/net/zd1211/zddevlist.h file. That should do. linux-kernel-devel should really depend on gawk and libncurses5-dev! -- [Dapper Flight 4] Not compile kernel source of package of Ubuntu https://launchpad.net/malone/bugs/33085 From me at davidandrewtaylor.co.uk Wed Apr 12 17:00:34 2006 From: me at davidandrewtaylor.co.uk (David Taylor) Date: Wed, 12 Apr 2006 17:00:34 -0000 Subject: [Bug 26859] Re: general: 2.6.12-10 regressions from 2.6.12-9 References: <20060113145140.21012.69410.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060412170034.15436.16418.malone@gangotri.ubuntu.com> Since changing PC's I have not seen the problem - so can't help as I no longer have the affected machine. It was a HP Vectra VEI8 if any one has one to test. -- general: 2.6.12-10 regressions from 2.6.12-9 https://launchpad.net/malone/bugs/26859 From neumann at lostwebsite.net Wed Apr 12 17:13:30 2006 From: neumann at lostwebsite.net (Francois-Denis Gonthier) Date: Wed, 12 Apr 2006 17:13:30 -0000 Subject: [Bug 36673] Re: Can't Compile Kernele References: <20060326042518.6253.77920.malonedeb@gandwana.ubuntu.com> Message-ID: <20060412171330.31677.76688.malone@gandwana.ubuntu.com> well now that we know that, what is the bug with Ubuntu? The zd1211 driver is certainly built in the default kernels, all drivers are AFAIK. Your specific configuration may have broken that particular driver. This is not unknown, some configuration fails on pristine kernels because of errors in some drivers. The kernel developers can't cover every single possible configuration. -- Can't Compile Kernele https://launchpad.net/malone/bugs/36673 From stephane.tranchemer at devinci.fr Wed Apr 12 17:19:29 2006 From: stephane.tranchemer at devinci.fr (Corsaire01) Date: Wed, 12 Apr 2006 17:19:29 -0000 Subject: [Bug 36158] Re: System does not shutdown References: <20060323145229.5380.85426.malonedeb@gangotri.ubuntu.com> Message-ID: <20060412171929.31651.15727.malone@gandwana.ubuntu.com> > Does a trace (https://wiki.ubuntu.com/DebuggingSystemCrash) reveal anything of interest? This happens AFTER the shutdown process being completed, at the moment the power is supposed to be turned off, there is no more process running, no more indication there is a system still running in fact ... So no, it doesn't reveal anything -- System does not shutdown https://launchpad.net/malone/bugs/36158 From fabbione at ubuntu.com Wed Apr 12 17:29:04 2006 From: fabbione at ubuntu.com (Fabio Massimo Di Nitto) Date: Wed, 12 Apr 2006 17:29:04 -0000 Subject: [Bug 26859] Re: [Bug 26859] Re: [Bug 26859] Re: general: 2.6.12-10 regressions from 2.6.12-9 References: <20060113145140.21012.69410.launchpad@macquarie.warthogs.hbd.com> <20060412053903.24486.32922.malone@gangotri.ubuntu.com> <20060412153605.61107.qmail@web54602.mail.yahoo.com> Message-ID: <443D38E0.7080307@ubuntu.com> ryan wrote: > Hai Fabio, > > I don't know about the K8 troubles, however I do know > about the K7 troubles with 2.6.12-10(k7) and with > 2.6.12-10(386). [SNIP] I did ask specifically to test one kernel since the problem is not the kernel. it's binutils that generates the code. > I will however try any reworked 2.6.12-10 kernel to > see if it is stable when it comes available for > apt-get.. > There are none available for i386. I did rebuild only amd64 and there were tons of reports with amd64. One of them could please test? Fabio -- I'm going to make him an offer he can't refuse. -- general: 2.6.12-10 regressions from 2.6.12-9 https://launchpad.net/malone/bugs/26859 From kiko at async.com.br Wed Apr 12 17:33:50 2006 From: kiko at async.com.br (Christian Reis) Date: Wed, 12 Apr 2006 17:33:50 -0000 Subject: [Bug 29767] Re: [Bug 29767] Re: IBM Thinkpad X41 suspend to disk unsatisfactory regression References: <20060126124346.26274.53643.malonedeb@gangotri.ubuntu.com> <20060410230934.32313.37839.malone@gandwana.ubuntu.com> Message-ID: <20060412173350.GA8444@anthem.async.com.br> On Mon, Apr 10, 2006 at 11:09:34PM -0000, Paul Sladen wrote: > sudo tail -0f /var/log/acpid [Wed Apr 12 14:32:33 2006] received event "ibm/hotkey HKEY 00000080 0000100c" [Wed Apr 12 14:32:33 2006] notifying client 3914[120:120] [Wed Apr 12 14:32:33 2006] executing action "/etc/acpi/hibernatebtn.sh" [Wed Apr 12 14:32:33 2006] BEGIN HANDLER MESSAGES [Wed Apr 12 14:32:33 2006] END HANDLER MESSAGES [Wed Apr 12 14:32:33 2006] action exited with status 0 [Wed Apr 12 14:32:33 2006] completed event "ibm/hotkey HKEY 00000080 0000100c" > cat /proc/acpi/ibm/hotkey status: enabled mask: 0xff9f commands: enable, disable, reset, > lshal -m platform_i8042_i8042_Kbd_Port_logicaldev_input condition ButtonPressed = hibernate Now what? -- IBM Thinkpad X41 suspend to disk unsatisfactory regression https://launchpad.net/malone/bugs/29767 From sitsofe at yahoo.com Wed Apr 12 17:38:26 2006 From: sitsofe at yahoo.com (Sitsofe Wheeler) Date: Wed, 12 Apr 2006 17:38:26 -0000 Subject: [Bug 39034] Re: 2.6.15-20 makes eepro 100 ethernet not working References: <20060410193639.32233.93891.malonedeb@gandwana.ubuntu.com> Message-ID: <20060412173826.31651.70336.launchpad@gandwana.ubuntu.com> ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Unconfirmed => Needs Info -- 2.6.15-20 makes eepro 100 ethernet not working https://launchpad.net/malone/bugs/39034 From sitsofe at yahoo.com Wed Apr 12 17:45:07 2006 From: sitsofe at yahoo.com (Sitsofe Wheeler) Date: Wed, 12 Apr 2006 17:45:07 -0000 Subject: [Bug 38937] Re: Kernel being noisy at boottime References: <20060409223348.24516.87248.malonedeb@gangotri.ubuntu.com> Message-ID: <20060412174507.15408.47193.launchpad@gangotri.ubuntu.com> ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Unconfirmed => Needs Info -- Kernel being noisy at boottime https://launchpad.net/malone/bugs/38937 From sitsofe at yahoo.com Wed Apr 12 17:54:46 2006 From: sitsofe at yahoo.com (Sitsofe Wheeler) Date: Wed, 12 Apr 2006 17:54:46 -0000 Subject: [Bug 38856] Re: Complete freeze on boot References: <20060409112318.32233.90923.malonedeb@gandwana.ubuntu.com> Message-ID: <20060412175446.31677.51245.malone@gandwana.ubuntu.com> There is a yenta socket mini oops in that dmesg... 94748.459000] EIP: 0060:[] CPU: 0 [4294748.459000] EIP is at yenta_interrupt+0x4f/0xd0 [yenta_socket] [4294748.459000] EFLAGS: 00000256 Not tainted (2.6.15-19-386) [4294748.459000] EAX: 00000050 EBX: 00000000 ECX: 00000000 EDX: f8990000 [4294748.459000] ESI: 00000000 EDI: c1b7f800 EBP: 00000000 DS: 007b ES: 007b [4294748.459000] CR0: 8005003b CR2: b7cb94ee CR3: 3417b000 CR4: 00000690 I may check to see if my PCMCIA -> PCI bridge does something similar. -- Complete freeze on boot https://launchpad.net/malone/bugs/38856 From sitsofe at yahoo.com Wed Apr 12 17:57:31 2006 From: sitsofe at yahoo.com (Sitsofe Wheeler) Date: Wed, 12 Apr 2006 17:57:31 -0000 Subject: [Bug 38856] Re: Complete freeze on boot References: <20060409112318.32233.90923.malonedeb@gandwana.ubuntu.com> Message-ID: <20060412175731.31677.41637.malone@gandwana.ubuntu.com> Tero: Could you attach the output of lspci -v ? -- Complete freeze on boot https://launchpad.net/malone/bugs/38856 From sitsofe at yahoo.com Wed Apr 12 18:00:57 2006 From: sitsofe at yahoo.com (Sitsofe Wheeler) Date: Wed, 12 Apr 2006 18:00:57 -0000 Subject: [Bug 38859] Re: The boot CD does not work on Cyrix References: <20060409115532.32233.49614.malonedeb@gandwana.ubuntu.com> Message-ID: <20060412180057.15436.89254.malone@gangotri.ubuntu.com> Adding the output of: cat /proc/cpuinfo Might well be helpful... -- The boot CD does not work on Cyrix https://launchpad.net/malone/bugs/38859 From mdz at ubuntu.com Wed Apr 12 18:14:38 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Wed, 12 Apr 2006 18:14:38 -0000 Subject: [Bug 36736] Re: Laptop doesn't wakeup after sleep References: <20060326141302.6279.83357.malonedeb@gandwana.ubuntu.com> Message-ID: <20060412181438.31651.75014.launchpad@gandwana.ubuntu.com> ** Changed in: linux-meta linux-image-2.6-686 (Ubuntu) Sourcepackagename: linux-meta => linux-source-2.6.15 Binarypackagename: linux-image-2.6-686 => None -- Laptop doesn't wakeup after sleep https://launchpad.net/malone/bugs/36736 From jkanowitz at snet.net Wed Apr 12 19:04:21 2006 From: jkanowitz at snet.net (floid) Date: Wed, 12 Apr 2006 19:04:21 -0000 Subject: [Bug 31730] Re: JFS is flakey References: <20060217052633.795.42803.malonedeb@gandwana.ubuntu.com> Message-ID: <20060412190421.15408.93172.malone@gangotri.ubuntu.com> With 2.6.15-20 i386 (32-bit), Dapper Flight 6, JFS is giving equal headaches. The biggest showstopper appears to be that fsck.jfs does not always detect a dirty filesystem, leading to a 'successful' journal replay in ignorance of corrupt entries. This is being a particular bear with X.org/gdm-related entries in /tmp, given my machine's tendency to jam itself in odd ways immediately after opening files there. (See #39333) Doing a forced check actually cleans things up. A concomitant issue is the boot process's handling of the case where fsck.jfs doesn't do its job and so a JFS root partition comes up read-only. Lots of things fail there, obviously, but some truly weird things happen (bash with no job control coming up 'over' a text-gui gdm complaint dialog, other consoles and instances of login seeming to initialize or not at random) ... IMHO, the boot scripts should check that all requisite locations are writable (/tmp, /var/log, where else?) and bomb straight to a shell -- with instructions for continuing after a manual fsck -- if not. -- JFS is flakey https://launchpad.net/malone/bugs/31730 From dgerard at gmail.com Wed Apr 12 19:10:13 2006 From: dgerard at gmail.com (David Gerard) Date: Wed, 12 Apr 2006 19:10:13 -0000 Subject: [Bug 29971] Re: Ubuntu doesn't detect and install my wireless orinoco_usb chipset References: <20060129095757.9344.91081.malonedeb@gandwana.ubuntu.com> Message-ID: <20060412191013.15436.21245.malone@gangotri.ubuntu.com> I'm now having ... intermittent oddness. Sometimes when the DHCP lease runs out, the keyboard stops working. o_0 If I Fn-F2 twice, the wifi picks up a new lease and the keyboard works again. Now, that's what I call a beta ... I expect putting orinoco_usb in the production Dapper with people expecting this to Just Work would be a *bad* idea. The driver almost certainly needs quite a bit more maturation before being considered production quality. However, there's still no other way to use a W200 in Linux (except maybe ndiswrapper, which is a fate almost worse than Windows). Giving the user a warning message of caveats if this driver is detected? How clunky ... -- Ubuntu doesn't detect and install my wireless orinoco_usb chipset https://launchpad.net/malone/bugs/29971 From hez at truegeek.net Wed Apr 12 19:34:02 2006 From: hez at truegeek.net (Hezekiah Carty) Date: Wed, 12 Apr 2006 19:34:02 -0000 Subject: [Bug 35213] Re: hibernate fails when not on AC power on HP Pavilion ZT3000 - regression from breezy References: <20060316170910.6510.54248.malonedeb@gangotri.ubuntu.com> Message-ID: <20060412193402.31677.41355.malone@gandwana.ubuntu.com> I also have the same problem on a Sony Vaio VGN-S260. Suspend to RAM works under both Breezy and Dapper, and hibernate works properly under Breezy. But I have the same problem as mentioned above with hibernation failing under Dapper. -- hibernate fails when not on AC power on HP Pavilion ZT3000 - regression from breezy https://launchpad.net/malone/bugs/35213 From burner at suppressingfire.org Wed Apr 12 19:47:13 2006 From: burner at suppressingfire.org (Michael R. Head) Date: Wed, 12 Apr 2006 19:47:13 -0000 Subject: [Bug 39338] [dapper] Tons of kernel error messages bring laptop to crawl: hermes @ f09fa000: Error -16 issuing command 0x010b. References: <20060412194713.31677.38583.malonedeb@gandwana.ubuntu.com> Message-ID: <20060412194713.31677.38583.malonedeb@gandwana.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: Recently I've starting having this trouble with my wireless card with some wireless networks. At some point while being connected, syslog starts filling up with tons of messages about errors issuing commands. It doesn't seem to happen when I'm plugged in to the network with a cable. When this happens, my laptop starts to crawl and eventually stops responding to about everything except mouse movements (the cursor will jump positions every couple minutes). I can't even get mouse clicks to appear to do anything. Keyboard actions don't seem to work either (neither alt-tab nor ctrl-alt-F1). My laptop has a minipci orinoco_pci wireless card (and an e100 wired card). I use NetworkManager to handle all my network connections. Here are a few entries from syslog that were left there from the last time this happened. Apr 12 14:08:32 localhost ntpdate[5862]: no server suitable for synchronization found Apr 12 14:08:37 localhost kernel: [4294870.806000] eth0: no IPv6 routers present Apr 12 14:10:16 localhost kernel: [4294968.510000] NETDEV WATCHDOG: eth0: transmit timed out Apr 12 14:10:16 localhost kernel: [4294968.510000] eth0: Tx timeout! ALLOCFID=ffff, TXCOMPLFID=ffff, EVSTAT=8000 Apr 12 14:10:16 localhost kernel: [4294970.193000] eth0: New link status: Connected (0001) Apr 12 14:10:16 localhost kernel: [4294970.201000] eth0: New link status: Disconnected (0002) Apr 12 14:10:18 localhost kernel: [4294971.971000] eth0: New link status: Connected (0001) Apr 12 14:12:18 localhost kernel: [4295090.971000] NETDEV WATCHDOG: eth0: transmit timed out Apr 12 14:12:18 localhost kernel: [4295090.971000] eth0: Tx timeout! ALLOCFID=ffff, TXCOMPLFID=ffff, EVSTAT=8000 Apr 12 14:12:19 localhost kernel: [4295092.652000] eth0: New link status: Connected (0001) Apr 12 14:14:24 localhost kernel: [4295217.341000] hermes @ f09fa000: Timeout waiting for command 0x010b completion. Apr 12 14:14:24 localhost kernel: [4295217.341000] eth0: Error -110 transmitting packet Apr 12 14:14:24 localhost kernel: [4295217.571000] hermes @ f09fa000: Timeout waiting for command 0x010b completion. Apr 12 14:14:24 localhost kernel: [4295217.571000] eth0: Error -110 transmitting packet Apr 12 14:14:24 localhost kernel: [4295217.800000] hermes @ f09fa000: Error -16 issuing command 0x010b. Apr 12 14:14:24 localhost kernel: [4295217.800000] eth0: Error -16 transmitting packet Apr 12 14:14:24 localhost kernel: [4295217.800000] hermes @ f09fa000: Error -16 issuing command 0x010b. Apr 12 14:14:24 localhost kernel: [4295217.800000] eth0: Error -16 transmitting packet Apr 12 14:14:24 localhost kernel: [4295217.801000] hermes @ f09fa000: Error -16 issuing command 0x010b. Apr 12 14:14:24 localhost kernel: [4295217.801000] eth0: Error -16 transmitting packet Apr 12 14:14:24 localhost kernel: [4295217.801000] hermes @ f09fa000: Error -16 issuing command 0x010b. Apr 12 14:14:24 localhost kernel: [4295217.801000] eth0: Error -16 transmitting packet Apr 12 14:14:28 localhost kernel: [4295222.341000] printk: 23824 messages suppressed. Apr 12 14:14:28 localhost kernel: [4295222.341000] hermes @ f09fa000: Error -16 issuing command 0x010b. Apr 12 14:14:33 localhost kernel: [4295227.341000] printk: 26239 messages suppressed. Apr 12 14:14:33 localhost kernel: [4295227.341000] hermes @ f09fa000: Error -16 issuing command 0x010b. Apr 12 14:14:38 localhost kernel: [4295232.341000] printk: 26619 messages suppressed. Apr 12 14:14:38 localhost kernel: [4295232.341000] hermes @ f09fa000: Error -16 issuing command 0x010b. -- [dapper] Tons of kernel error messages bring laptop to crawl: hermes @ f09fa000: Error -16 issuing command 0x010b. https://launchpad.net/malone/bugs/39338 From steko at iosa.it Wed Apr 12 20:15:20 2006 From: steko at iosa.it (Stefano Costa) Date: Wed, 12 Apr 2006 20:15:20 -0000 Subject: [Bug 15221] Re: [Bug 15221] Re: cdrecord, gnomebaker, nautilus burner fail References: <20060113134106.21012.80387.launchpad@macquarie.warthogs.hbd.com> <20060412020428.32233.18480.malone@gandwana.ubuntu.com> Message-ID: <1144872920.443d5fd869542@cp.tophost.it> I really had no time to dig on this, sorry. but since I have problems with reading audio cds too I feel like it's something between my cd drive and the kernel. I do believe this is solved in 2.6.15, as you pointed out. Thanks ---------------------------------------------------------------- This message was sent using IMP, the Internet Messaging Program. -- cdrecord, gnomebaker, nautilus burner fail https://launchpad.net/malone/bugs/15221 From xavier.verne at free.fr Wed Apr 12 20:40:53 2006 From: xavier.verne at free.fr (Xavier Verne) Date: Wed, 12 Apr 2006 20:40:53 -0000 Subject: [Bug 39343] ndiswrapper not working for intel 3945G in Dapper flight 6 References: <20060412204053.15436.55221.malonedeb@gangotri.ubuntu.com> Message-ID: <20060412204053.15436.55221.malonedeb@gangotri.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: _ Bug always reproductible _ Trying to install my wireless intel 3945G chipset via windows drivers (ndiswrapper). _ Steps to reproduce Install ndiswrapper package Install windows driver ndiswrapper -l returns driver present, hardware present At boot, when trying to load w39n51 module I get in logs : syslog:Apr 12 22:20:12 ubuntu kernel: [4294691.885000] ndiswrapper version 1.8 loaded (preempt=yes,smp=no) syslog:Apr 12 22:20:12 ubuntu kernel: [4294692.167000] ndiswrapper (import:239): unknown symbol: ntoskrnl.exe:'KeQueryTickCount' syslog:Apr 12 22:20:12 ubuntu kernel: [4294692.167000] ndiswrapper (import:239): unknown symbol: NDIS.SYS:'NdisIMCopySendPerPacketInfo' syslog:Apr 12 22:20:12 ubuntu kernel: [4294692.167000] ndiswrapper (load_sys_files:218): couldn't prepare driver 'w39n51' syslog:Apr 12 22:20:12 ubuntu kernel: [4294692.168000] ndiswrapper (load_wrap_driver:112): loadndiswrapper failed (65280); check system log for messages from 'loadndisdriver' Please do add comment if you need some info, because ndiswrapper doc states this wireless card is supported. -- ndiswrapper not working for intel 3945G in Dapper flight 6 https://launchpad.net/malone/bugs/39343 From feenixx at hotmail.com Wed Apr 12 21:43:22 2006 From: feenixx at hotmail.com (mlind) Date: Wed, 12 Apr 2006 21:43:22 -0000 Subject: [Bug 38937] Re: Kernel being noisy at boottime References: <20060409223348.24516.87248.malonedeb@gangotri.ubuntu.com> Message-ID: <20060412214322.31651.59103.malone@gandwana.ubuntu.com> hdd is my LG DVD reader *-cdrom:1 description: DVD reader product: HL-DT-STDVD-ROM GDR8161B physical id: 1 bus info: ide at 1.1 logical name: /dev/hdd version: 0101 capabilities: packet atapi cdrom removable nonmagnetic dma lba iordy audio dvd configuration: mode=udma2 *-disc physical id: 0 logical name: /dev/hdd Both drives function normally, without any problems. -- Kernel being noisy at boottime https://launchpad.net/malone/bugs/38937 From feenixx at hotmail.com Wed Apr 12 21:44:38 2006 From: feenixx at hotmail.com (mlind) Date: Wed, 12 Apr 2006 21:44:38 -0000 Subject: [Bug 38937] Re: Kernel being noisy at boottime References: <20060409223348.24516.87248.malonedeb@gangotri.ubuntu.com> Message-ID: <20060412214438.15408.58093.malone@gangotri.ubuntu.com> I was just wondering if those messages are normal or not. -- Kernel being noisy at boottime https://launchpad.net/malone/bugs/38937 From brodock at gmail.com Wed Apr 12 22:10:17 2006 From: brodock at gmail.com (BrodocK) Date: Wed, 12 Apr 2006 22:10:17 -0000 Subject: [Bug 36673] Re: Can't Compile Kernele References: <20060326042518.6253.77920.malonedeb@gandwana.ubuntu.com> Message-ID: <20060412221017.15408.64517.malone@gangotri.ubuntu.com> I know that, that's why i'm reporting it here, so people can test and try to look for the problem and solve it, isn't it why we have a "bugzilla" here ? (i didn't said it's a bug with the pre-compiled kernel... i sad that by someway the default unmodified kernel source wasn't compilling here, and i brought you all information about my configuration so you can look for something not working the way it's pretended to...) -- Can't Compile Kernele https://launchpad.net/malone/bugs/36673 From sascha-ubuntu-launchpad at silbe.org Wed Apr 12 23:00:43 2006 From: sascha-ubuntu-launchpad at silbe.org (Sascha Silbe) Date: Wed, 12 Apr 2006 23:00:43 -0000 Subject: [Bug 30182] Re: mouse frozen on boot References: <20060131194401.11050.72203.malonedeb@gandwana.ubuntu.com> Message-ID: <20060412230043.31677.50891.malone@gandwana.ubuntu.com> Same here with Dapper Flight 5 using a USB mouse. Never had problems with that mouse on any other system. -- mouse frozen on boot https://launchpad.net/malone/bugs/30182 From mail at carthik.net Wed Apr 12 23:19:31 2006 From: mail at carthik.net (Carthik Sharma) Date: Wed, 12 Apr 2006 23:19:31 -0000 Subject: [Bug 23261] Re: kernel oops maybe bluetooth related References: <20060113142246.21012.5283.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060412231932.15436.25558.malone@gangotri.ubuntu.com> Thank you for reporting this bug and following up on it. I am marking this bug Closed since there has been no response from you for over three months. We would like to fix all existing issues, but need need feedback to help with debugging. Should you still have a problem with the latest up to date Dapper kernel and packages, please reopen this bug. In this case, please answer the questions that have already been asked of you before and provide the log files and information required for debugging. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Needs Info => Rejected -- kernel oops maybe bluetooth related https://launchpad.net/malone/bugs/23261 From mail at carthik.net Wed Apr 12 23:20:58 2006 From: mail at carthik.net (Carthik Sharma) Date: Wed, 12 Apr 2006 23:20:58 -0000 Subject: [Bug 23242] Re: clock is too slow, not able to set the clock in breezy References: <20060113142240.21012.34329.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060412232058.15408.53478.malone@gangotri.ubuntu.com> Thank you for reporting this bug and following up on it. I am marking this bug Closed since there has been no response from you for over three months. We would like to fix all existing issues, but need need feedback to help with debugging. Should you still have a problem with the latest up to date Dapper kernel and packages, please reopen this bug. In this case, please answer the questions that have already been asked of you before and provide the log files and information required for debugging. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Needs Info => Rejected -- clock is too slow, not able to set the clock in breezy https://launchpad.net/malone/bugs/23242 From mail at carthik.net Wed Apr 12 23:22:09 2006 From: mail at carthik.net (Carthik Sharma) Date: Wed, 12 Apr 2006 23:22:09 -0000 Subject: [Bug 23241] Re: bt878 card generates dst errors and will not tune References: <20060113142239.21012.85393.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060412232209.31651.20110.malone@gandwana.ubuntu.com> Thank you for reporting this bug and following up on it. I am marking this bug Closed since there has been no response from you for over three months. We would like to fix all existing issues, but need need feedback to help with debugging. Should you still have a problem with the latest up to date Dapper kernel and packages, please reopen this bug. In this case, please answer the questions that have already been asked of you before and provide the log files and information required for debugging. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Needs Info => Rejected -- bt878 card generates dst errors and will not tune https://launchpad.net/malone/bugs/23241 From mail at carthik.net Wed Apr 12 23:23:18 2006 From: mail at carthik.net (Carthik Sharma) Date: Wed, 12 Apr 2006 23:23:18 -0000 Subject: [Bug 23111] Re: GA311 netgear nic link speed at 100Mb/s Breezy References: <20060113142201.21012.99570.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060412232318.15408.84766.malone@gangotri.ubuntu.com> Thank you for reporting this bug and following up on it. I am marking this bug Closed since there has been no response from you for over three months. We would like to fix all existing issues, but need need feedback to help with debugging. Should you still have a problem with the latest up to date Dapper kernel and packages, please reopen this bug. In this case, please answer the questions that have already been asked of you before and provide the log files and information required for debugging. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Needs Info => Rejected -- GA311 netgear nic link speed at 100Mb/s Breezy https://launchpad.net/malone/bugs/23111 From mail at carthik.net Wed Apr 12 23:23:53 2006 From: mail at carthik.net (Carthik Sharma) Date: Wed, 12 Apr 2006 23:23:53 -0000 Subject: [Bug 23074] Re: unreliable network connection after upgrade (hoary -> breezy) References: <20060113142147.21012.43100.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060412232353.31651.75396.malone@gandwana.ubuntu.com> Thank you for reporting this bug and following up on it. I am marking this bug Closed since there has been no response from you for over three months. We would like to fix all existing issues, but need need feedback to help with debugging. Should you still have a problem with the latest up to date Dapper kernel and packages, please reopen this bug. In this case, please answer the questions that have already been asked of you before and provide the log files and information required for debugging. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Needs Info => Rejected -- unreliable network connection after upgrade (hoary -> breezy) https://launchpad.net/malone/bugs/23074 From mail at carthik.net Wed Apr 12 23:24:52 2006 From: mail at carthik.net (Carthik Sharma) Date: Wed, 12 Apr 2006 23:24:52 -0000 Subject: [Bug 23069] Re: Breezy (Colony 5) Installer hangs on HP dx5150 (AMD 64 / SATA) References: <20060113142145.21012.21012.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060412232452.31651.20732.malone@gandwana.ubuntu.com> Thank you for reporting this bug and following up on it. I am marking this bug Closed since there has been no response from you for over three months. We would like to fix all existing issues, but need need feedback to help with debugging. Should you still have a problem with the latest up to date Dapper kernel and packages, please reopen this bug. In this case, please answer the questions that have already been asked of you before and provide the log files and information required for debugging. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Needs Info => Rejected -- Breezy (Colony 5) Installer hangs on HP dx5150 (AMD 64 / SATA) https://launchpad.net/malone/bugs/23069 From mail at carthik.net Wed Apr 12 23:25:59 2006 From: mail at carthik.net (Carthik Sharma) Date: Wed, 12 Apr 2006 23:25:59 -0000 Subject: [Bug 23028] Re: Prism wireless card crashes computer in latest breezy updates References: <20060113142132.21012.95144.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060412232600.31651.35516.malone@gandwana.ubuntu.com> Thank you for reporting this bug and following up on it. I am marking this bug Closed since there has been no response from you for over three months. We would like to fix all existing issues, but need need feedback to help with debugging. Should you still have a problem with the latest up to date Dapper kernel and packages, please reopen this bug. In this case, please answer the questions that have already been asked of you before and provide the log files and information required for debugging. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Needs Info => Rejected -- Prism wireless card crashes computer in latest breezy updates https://launchpad.net/malone/bugs/23028 From mail at carthik.net Wed Apr 12 23:27:36 2006 From: mail at carthik.net (Carthik Sharma) Date: Wed, 12 Apr 2006 23:27:36 -0000 Subject: [Bug 22923] Re: system crash upon execution References: <20060113142055.21012.30062.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060412232737.31651.76618.malone@gandwana.ubuntu.com> Thank you for reporting this bug and following up on it. I am marking this bug Closed since there has been no response from you for over three months. We would like to fix all existing issues, but need need feedback to help with debugging. Should you still have a problem with the latest up to date Dapper kernel and packages, please reopen this bug. In this case, please answer the questions that have already been asked of you before and provide the log files and information required for debugging. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Needs Info => Rejected -- system crash upon execution https://launchpad.net/malone/bugs/22923 From mail at carthik.net Wed Apr 12 23:26:36 2006 From: mail at carthik.net (Carthik Sharma) Date: Wed, 12 Apr 2006 23:26:36 -0000 Subject: [Bug 23017] Re: touchpad becomes very slow after unplugging an external mouse on Fujitsu Lifebook S2020 References: <20060113142128.21012.40549.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060412232636.31651.4042.malone@gandwana.ubuntu.com> Thank you for reporting this bug and following up on it. I am marking this bug Closed since there has been no response from you for over three months. We would like to fix all existing issues, but need need feedback to help with debugging. Should you still have a problem with the latest up to date Dapper kernel and packages, please reopen this bug. In this case, please answer the questions that have already been asked of you before and provide the log files and information required for debugging. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Needs Info => Rejected -- touchpad becomes very slow after unplugging an external mouse on Fujitsu Lifebook S2020 https://launchpad.net/malone/bugs/23017 From mail at carthik.net Wed Apr 12 23:28:07 2006 From: mail at carthik.net (Carthik Sharma) Date: Wed, 12 Apr 2006 23:28:07 -0000 Subject: [Bug 22805] Re: Acer Aspire 1802 doesn't power off References: <20060113142016.21012.65257.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060412232808.15436.22334.malone@gangotri.ubuntu.com> Thank you for reporting this bug and following up on it. I am marking this bug Closed since there has been no response from you for over three months. We would like to fix all existing issues, but need need feedback to help with debugging. Should you still have a problem with the latest up to date Dapper kernel and packages, please reopen this bug. In this case, please answer the questions that have already been asked of you before and provide the log files and information required for debugging. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Needs Info => Rejected -- Acer Aspire 1802 doesn't power off https://launchpad.net/malone/bugs/22805 From mail at carthik.net Wed Apr 12 23:29:56 2006 From: mail at carthik.net (Carthik Sharma) Date: Wed, 12 Apr 2006 23:29:56 -0000 Subject: [Bug 22601] Re: Long delay loading ide-cd References: <20060113141914.21012.35743.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060412232956.31651.22776.malone@gandwana.ubuntu.com> Thank you for reporting this bug and following up on it. I am marking this bug Closed since there has been no response from you for over three months. We would like to fix all existing issues, but need need feedback to help with debugging. Should you still have a problem with the latest up to date Dapper kernel and packages, please reopen this bug. In this case, please answer the questions that have already been asked of you before and provide the log files and information required for debugging. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Needs Info => Rejected -- Long delay loading ide-cd https://launchpad.net/malone/bugs/22601 From mail at carthik.net Wed Apr 12 23:35:01 2006 From: mail at carthik.net (Carthik Sharma) Date: Wed, 12 Apr 2006 23:35:01 -0000 Subject: [Bug 23262] Re: Kernel panic on resume after ACPI S1 or S3 suspend References: <20060113142246.21012.17356.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060412233501.31651.8996.malone@gandwana.ubuntu.com> Thank you for reporting this bug and following up on it. I am marking this bug Closed since there has been no response from you for over three months. We would like to fix all existing issues, but need need feedback to help with debugging. Should you still have a problem with the latest up to date Dapper kernel and packages, please reopen this bug. In this case, please answer the questions that have already been asked of you before and provide the log files and information required for debugging. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Needs Info => Rejected -- Kernel panic on resume after ACPI S1 or S3 suspend https://launchpad.net/malone/bugs/23262 From mail at carthik.net Wed Apr 12 23:38:27 2006 From: mail at carthik.net (Carthik Sharma) Date: Wed, 12 Apr 2006 23:38:27 -0000 Subject: [Bug 23733] Re: Hang when loading some module via hotplug References: <20060113142520.21012.11758.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060412233827.15436.37963.malone@gangotri.ubuntu.com> Thank you for reporting this bug and following up on it. I am marking this bug Closed since there has been no response from you for over three months. We would like to fix all existing issues, but need need feedback to help with debugging. Should you still have a problem with the latest up to date Dapper kernel and packages, please reopen this bug. In this case, please answer the questions that have already been asked of you before and provide the log files and information required for debugging. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Needs Info => Rejected -- Hang when loading some module via hotplug https://launchpad.net/malone/bugs/23733 From mail at carthik.net Wed Apr 12 23:38:05 2006 From: mail at carthik.net (Carthik Sharma) Date: Wed, 12 Apr 2006 23:38:05 -0000 Subject: [Bug 23605] Re: gdm dies during boot References: <20060113142439.21012.70753.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060412233805.31677.775.malone@gandwana.ubuntu.com> Thank you for reporting this bug and following up on it. I am marking this bug Closed since there has been no response from you for over three months. We would like to fix all existing issues, but need need feedback to help with debugging. Should you still have a problem with the latest up to date Dapper kernel and packages, please reopen this bug. In this case, please answer the questions that have already been asked of you before and provide the log files and information required for debugging. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Needs Info => Rejected -- gdm dies during boot https://launchpad.net/malone/bugs/23605 From mail at carthik.net Wed Apr 12 23:37:09 2006 From: mail at carthik.net (Carthik Sharma) Date: Wed, 12 Apr 2006 23:37:09 -0000 Subject: [Bug 23528] Re: Kernel 686 SMP has bad performance References: <20060113142411.21012.74080.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060412233709.15436.79872.malone@gangotri.ubuntu.com> Thank you for reporting this bug and following up on it. I am marking this bug Closed since there has been no response from you for over three months. We would like to fix all existing issues, but need need feedback to help with debugging. Should you still have a problem with the latest up to date Dapper kernel and packages, please reopen this bug. In this case, please answer the questions that have already been asked of you before and provide the log files and information required for debugging. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Needs Info => Rejected -- Kernel 686 SMP has bad performance https://launchpad.net/malone/bugs/23528 From mail at carthik.net Wed Apr 12 23:36:46 2006 From: mail at carthik.net (Carthik Sharma) Date: Wed, 12 Apr 2006 23:36:46 -0000 Subject: [Bug 23522] Re: Kernel Hangs after probing IDE for a long time. References: <20060113142409.21012.85012.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060412233646.15408.76000.malone@gangotri.ubuntu.com> Thank you for reporting this bug and following up on it. I am marking this bug Closed since there has been no response from you for over three months. We would like to fix all existing issues, but need need feedback to help with debugging. Should you still have a problem with the latest up to date Dapper kernel and packages, please reopen this bug. In this case, please answer the questions that have already been asked of you before and provide the log files and information required for debugging. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Needs Info => Rejected -- Kernel Hangs after probing IDE for a long time. https://launchpad.net/malone/bugs/23522 From gnome at nextreality.net Wed Apr 12 23:37:34 2006 From: gnome at nextreality.net (Brent Smith (smitten)) Date: Wed, 12 Apr 2006 23:37:34 -0000 Subject: [Bug 23017] Re: touchpad becomes very slow after unplugging an external mouse on Fujitsu Lifebook S2020 References: <20060113142128.21012.40549.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060412233734.15436.23484.malone@gangotri.ubuntu.com> sorry, sold the laptop. -- touchpad becomes very slow after unplugging an external mouse on Fujitsu Lifebook S2020 https://launchpad.net/malone/bugs/23017 From mail at carthik.net Wed Apr 12 23:35:36 2006 From: mail at carthik.net (Carthik Sharma) Date: Wed, 12 Apr 2006 23:35:36 -0000 Subject: [Bug 23456] Re: system doesn't shutdown References: <20060113142347.21012.5454.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060412233536.15408.56655.malone@gangotri.ubuntu.com> Thank you for reporting this bug and following up on it. I am marking this bug Closed since there has been no response from you for over three months. We would like to fix all existing issues, but need need feedback to help with debugging. Should you still have a problem with the latest up to date Dapper kernel and packages, please reopen this bug. In this case, please answer the questions that have already been asked of you before and provide the log files and information required for debugging. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Needs Info => Rejected -- system doesn't shutdown https://launchpad.net/malone/bugs/23456 From mail at carthik.net Wed Apr 12 23:39:19 2006 From: mail at carthik.net (Carthik Sharma) Date: Wed, 12 Apr 2006 23:39:19 -0000 Subject: [Bug 22555] Re: with ehci-hcd, kernel needs 3 minutes to detect USB stick References: <20060113141857.21012.27150.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060412233919.31677.14533.malone@gandwana.ubuntu.com> Thank you for reporting this bug and following up on it. I am marking this bug Closed since there has been no response from you for over three months. We would like to fix all existing issues, but need need feedback to help with debugging. Should you still have a problem with the latest up to date Dapper kernel and packages, please reopen this bug. In this case, please answer the questions that have already been asked of you before and provide the log files and information required for debugging. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Needs Info => Rejected -- with ehci-hcd, kernel needs 3 minutes to detect USB stick https://launchpad.net/malone/bugs/22555 From mail at carthik.net Wed Apr 12 23:37:42 2006 From: mail at carthik.net (Carthik Sharma) Date: Wed, 12 Apr 2006 23:37:42 -0000 Subject: [Bug 23591] Re: ndiswrapper breaking ipod support References: <20060113142434.21012.74003.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060412233742.15408.73372.malone@gangotri.ubuntu.com> Thank you for reporting this bug and following up on it. I am marking this bug Closed since there has been no response from you for over three months. We would like to fix all existing issues, but need need feedback to help with debugging. Should you still have a problem with the latest up to date Dapper kernel and packages, please reopen this bug. In this case, please answer the questions that have already been asked of you before and provide the log files and information required for debugging. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Needs Info => Rejected -- ndiswrapper breaking ipod support https://launchpad.net/malone/bugs/23591 From mail at carthik.net Wed Apr 12 23:36:14 2006 From: mail at carthik.net (Carthik Sharma) Date: Wed, 12 Apr 2006 23:36:14 -0000 Subject: [Bug 23516] Re: removing flash card without unmounting wedges things References: <20060113142407.21012.92151.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060412233614.31651.8534.malone@gandwana.ubuntu.com> Thank you for reporting this bug and following up on it. I am marking this bug Closed since there has been no response from you for over three months. We would like to fix all existing issues, but need need feedback to help with debugging. Should you still have a problem with the latest up to date Dapper kernel and packages, please reopen this bug. In this case, please answer the questions that have already been asked of you before and provide the log files and information required for debugging. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Needs Info => Rejected -- removing flash card without unmounting wedges things https://launchpad.net/malone/bugs/23516 From mail at carthik.net Wed Apr 12 23:38:48 2006 From: mail at carthik.net (Carthik Sharma) Date: Wed, 12 Apr 2006 23:38:48 -0000 Subject: [Bug 22576] Re: critical tempature reached ...shut down References: <20060113141905.21012.13265.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060412233848.15436.10622.malone@gangotri.ubuntu.com> Thank you for reporting this bug and following up on it. I am marking this bug Closed since there has been no response from you for over three months. We would like to fix all existing issues, but need need feedback to help with debugging. Should you still have a problem with the latest up to date Dapper kernel and packages, please reopen this bug. In this case, please answer the questions that have already been asked of you before and provide the log files and information required for debugging. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Needs Info => Rejected -- critical tempature reached ...shut down https://launchpad.net/malone/bugs/22576 From mail at carthik.net Wed Apr 12 23:39:41 2006 From: mail at carthik.net (Carthik Sharma) Date: Wed, 12 Apr 2006 23:39:41 -0000 Subject: [Bug 22498] Re: skge driver doesn't handle setting hardware address immediately after being upped References: <20060113141840.21012.48648.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060412233941.31651.58894.malone@gandwana.ubuntu.com> Thank you for reporting this bug and following up on it. I am marking this bug Closed since there has been no response from you for over three months. We would like to fix all existing issues, but need need feedback to help with debugging. Should you still have a problem with the latest up to date Dapper kernel and packages, please reopen this bug. In this case, please answer the questions that have already been asked of you before and provide the log files and information required for debugging. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Needs Info => Rejected -- skge driver doesn't handle setting hardware address immediately after being upped https://launchpad.net/malone/bugs/22498 From mail at carthik.net Wed Apr 12 23:40:10 2006 From: mail at carthik.net (Carthik Sharma) Date: Wed, 12 Apr 2006 23:40:10 -0000 Subject: [Bug 22413] Re: no reboot / shutdown on asus m6ne laptop [breezy] References: <20060113141812.21012.26151.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060412234011.31677.95303.malone@gandwana.ubuntu.com> Thank you for reporting this bug and following up on it. I am marking this bug Closed since there has been no response from you for over three months. We would like to fix all existing issues, but need need feedback to help with debugging. Should you still have a problem with the latest up to date Dapper kernel and packages, please reopen this bug. In this case, please answer the questions that have already been asked of you before and provide the log files and information required for debugging. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Needs Info => Rejected -- no reboot / shutdown on asus m6ne laptop [breezy] https://launchpad.net/malone/bugs/22413 From mail at carthik.net Wed Apr 12 23:49:03 2006 From: mail at carthik.net (Carthik Sharma) Date: Wed, 12 Apr 2006 23:49:03 -0000 Subject: [Bug 23798] Re: Kernel oops with amd64-smp kernel. References: <20060113142545.21012.78363.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060412234904.31677.75251.malone@gandwana.ubuntu.com> Thank you for reporting this bug and following up on it. I am marking this bug Closed since there has been no response from you for over three months. We would like to fix all existing issues, but need need feedback to help with debugging. Should you still have a problem with the latest up to date Dapper kernel and packages, please reopen this bug. In this case, please answer the questions that have already been asked of you before and provide the log files and information required for debugging. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Needs Info => Rejected -- Kernel oops with amd64-smp kernel. https://launchpad.net/malone/bugs/23798 From mail at carthik.net Wed Apr 12 23:48:35 2006 From: mail at carthik.net (Carthik Sharma) Date: Wed, 12 Apr 2006 23:48:35 -0000 Subject: [Bug 23779] Re: usr5610 stops on high data transfers References: <20060113142538.21012.230.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060412234836.31677.56406.malone@gandwana.ubuntu.com> Thank you for reporting this bug and following up on it. I am marking this bug Closed since there has been no response from you for over three months. We would like to fix all existing issues, but need need feedback to help with debugging. Should you still have a problem with the latest up to date Dapper kernel and packages, please reopen this bug. In this case, please answer the questions that have already been asked of you before and provide the log files and information required for debugging. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Needs Info => Rejected -- usr5610 stops on high data transfers https://launchpad.net/malone/bugs/23779 From mail at carthik.net Wed Apr 12 23:47:10 2006 From: mail at carthik.net (Carthik Sharma) Date: Wed, 12 Apr 2006 23:47:10 -0000 Subject: [Bug 22214] Re: radeonfb broken on ATI with exotic laptop lcd References: <20060113141702.21012.51440.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060412234710.31677.25282.malone@gandwana.ubuntu.com> Thank you for reporting this bug and following up on it. I am marking this bug Closed since there has been no response from you for over three months. We would like to fix all existing issues, but need need feedback to help with debugging. Should you still have a problem with the latest up to date Dapper kernel and packages, please reopen this bug. In this case, please answer the questions that have already been asked of you before and provide the log files and information required for debugging. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Needs Info => Rejected -- radeonfb broken on ATI with exotic laptop lcd https://launchpad.net/malone/bugs/22214 From mail at carthik.net Wed Apr 12 23:47:43 2006 From: mail at carthik.net (Carthik Sharma) Date: Wed, 12 Apr 2006 23:47:43 -0000 Subject: [Bug 22184] Re: Occasional hard lockups on T43 Thinkpad References: <20060113141653.21012.20891.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060412234743.15408.41687.malone@gangotri.ubuntu.com> Thank you for reporting this bug and following up on it. I am marking this bug Closed since there has been no response from you for over three months. We would like to fix all existing issues, but need need feedback to help with debugging. Should you still have a problem with the latest up to date Dapper kernel and packages, please reopen this bug. In this case, please answer the questions that have already been asked of you before and provide the log files and information required for debugging. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Needs Info => Rejected -- Occasional hard lockups on T43 Thinkpad https://launchpad.net/malone/bugs/22184 From mail at carthik.net Wed Apr 12 23:48:05 2006 From: mail at carthik.net (Carthik Sharma) Date: Wed, 12 Apr 2006 23:48:05 -0000 Subject: [Bug 22177] Re: battery status only with 2.6.10 kernel on acer aspire 5020 series laptops References: <20060113141651.21012.23475.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060412234806.31651.67319.malone@gandwana.ubuntu.com> Thank you for reporting this bug and following up on it. I am marking this bug Closed since there has been no response from you for over three months. We would like to fix all existing issues, but need need feedback to help with debugging. Should you still have a problem with the latest up to date Dapper kernel and packages, please reopen this bug. In this case, please answer the questions that have already been asked of you before and provide the log files and information required for debugging. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Needs Info => Rejected -- battery status only with 2.6.10 kernel on acer aspire 5020 series laptops https://launchpad.net/malone/bugs/22177 From mail at carthik.net Wed Apr 12 23:53:59 2006 From: mail at carthik.net (Carthik Sharma) Date: Wed, 12 Apr 2006 23:53:59 -0000 Subject: [Bug 23941] Re: Resuming from Suspend-To-Disk after doing a Susp-To-Ram turns kacpid to 99% References: <20060113142634.21012.79546.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060412235400.15408.41775.malone@gangotri.ubuntu.com> Confirmed by another user in Dapper. Roy, is this bug still reproduceable in the latest kernel provided by Dapper? Thank you for reporting this bug and following up on it. :) ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Needs Info => Confirmed -- Resuming from Suspend-To-Disk after doing a Susp-To-Ram turns kacpid to 99% https://launchpad.net/malone/bugs/23941 From mail at carthik.net Wed Apr 12 23:51:34 2006 From: mail at carthik.net (Carthik Sharma) Date: Wed, 12 Apr 2006 23:51:34 -0000 Subject: [Bug 23844] Re: Hang when some module is loaded via hotplug References: <20060113142559.21012.78040.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060412235134.31651.94740.malone@gandwana.ubuntu.com> Thank you for reporting this bug and following up on it. I am marking this bug Closed since there has been no response from you for over three months. We would like to fix all existing issues, but need need feedback to help with debugging. Should you still have a problem with the latest up to date Dapper kernel and packages, please reopen this bug. In this case, please answer the questions that have already been asked of you before and provide the log files and information required for debugging. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Needs Info => Rejected -- Hang when some module is loaded via hotplug https://launchpad.net/malone/bugs/23844 From mail at carthik.net Wed Apr 12 23:52:16 2006 From: mail at carthik.net (Carthik Sharma) Date: Wed, 12 Apr 2006 23:52:16 -0000 Subject: [Bug 23922] Re: Breezy: cannot restart HP nx8220 laptop after hibernation References: <20060113142628.21012.74291.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060412235216.15436.25396.malone@gangotri.ubuntu.com> Thank you for reporting this bug and following up on it. I am marking this bug Closed since there has been no response from you for over three months. We would like to fix all existing issues, but need need feedback to help with debugging. Should you still have a problem with the latest up to date Dapper kernel and packages, please reopen this bug. In this case, please answer the questions that have already been asked of you before and provide the log files and information required for debugging. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Needs Info => Rejected -- Breezy: cannot restart HP nx8220 laptop after hibernation https://launchpad.net/malone/bugs/23922 From mail at carthik.net Wed Apr 12 23:51:55 2006 From: mail at carthik.net (Carthik Sharma) Date: Wed, 12 Apr 2006 23:51:55 -0000 Subject: [Bug 23883] Re: Acer TravelMate 290, the touchpad go crazy after suspend References: <20060113142617.21012.5965.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060412235155.15436.30439.malone@gangotri.ubuntu.com> Thank you for reporting this bug and following up on it. I am marking this bug Closed since there has been no response from you for over three months. We would like to fix all existing issues, but need need feedback to help with debugging. Should you still have a problem with the latest up to date Dapper kernel and packages, please reopen this bug. In this case, please answer the questions that have already been asked of you before and provide the log files and information required for debugging. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Needs Info => Rejected -- Acer TravelMate 290, the touchpad go crazy after suspend https://launchpad.net/malone/bugs/23883 From mail at carthik.net Wed Apr 12 23:52:35 2006 From: mail at carthik.net (Carthik Sharma) Date: Wed, 12 Apr 2006 23:52:35 -0000 Subject: [Bug 23933] Re: Incessant verbose ATAPI error messages (HP Pavilion 4165 DVD) References: <20060113142631.21012.13161.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060412235236.31651.90983.malone@gandwana.ubuntu.com> Thank you for reporting this bug and following up on it. I am marking this bug Closed since there has been no response from you for over three months. We would like to fix all existing issues, but need need feedback to help with debugging. Should you still have a problem with the latest up to date Dapper kernel and packages, please reopen this bug. In this case, please answer the questions that have already been asked of you before and provide the log files and information required for debugging. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Needs Info => Rejected -- Incessant verbose ATAPI error messages (HP Pavilion 4165 DVD) https://launchpad.net/malone/bugs/23933 From mail at carthik.net Wed Apr 12 23:58:01 2006 From: mail at carthik.net (Carthik Sharma) Date: Wed, 12 Apr 2006 23:58:01 -0000 Subject: [Bug 22004] Re: linux-image-2.6.12-8-amd64-xeon hangs at hotplug start when booting Dell PowerEdge 2850 References: <20060113141554.21012.14928.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060412235801.31677.49497.malone@gandwana.ubuntu.com> Thank you for reporting this bug and following up on it. I am marking this bug Closed since there has been no response from you for over three months. We would like to fix all existing issues, but need need feedback to help with debugging. Should you still have a problem with the latest up to date Dapper kernel and packages, please reopen this bug. In this case, please answer the questions that have already been asked of you before and provide the log files and information required for debugging. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Needs Info => Rejected -- linux-image-2.6.12-8-amd64-xeon hangs at hotplug start when booting Dell PowerEdge 2850 https://launchpad.net/malone/bugs/22004 From mail at carthik.net Wed Apr 12 23:58:44 2006 From: mail at carthik.net (Carthik Sharma) Date: Wed, 12 Apr 2006 23:58:44 -0000 Subject: [Bug 21810] Re: Very long boot time when using the 686 kernel References: <20060113141453.21012.28928.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060412235844.31651.86614.malone@gandwana.ubuntu.com> Thank you for reporting this bug and following up on it. I am marking this bug Closed since there has been no response from you for over three months. We would like to fix all existing issues, but need need feedback to help with debugging. Should you still have a problem with the latest up to date Dapper kernel and packages, please reopen this bug. In this case, please answer the questions that have already been asked of you before and provide the log files and information required for debugging. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Needs Info => Rejected -- Very long boot time when using the 686 kernel https://launchpad.net/malone/bugs/21810 From mail at carthik.net Wed Apr 12 23:59:07 2006 From: mail at carthik.net (Carthik Sharma) Date: Wed, 12 Apr 2006 23:59:07 -0000 Subject: [Bug 21787] Re: oops when USB2 hd plugged in References: <20060113141445.21012.12260.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060412235907.15436.52472.malone@gangotri.ubuntu.com> Thank you for reporting this bug and following up on it. I am marking this bug Closed since there has been no response from you for over three months. We would like to fix all existing issues, but need need feedback to help with debugging. Should you still have a problem with the latest up to date Dapper kernel and packages, please reopen this bug. In this case, please answer the questions that have already been asked of you before and provide the log files and information required for debugging. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Needs Info => Rejected -- oops when USB2 hd plugged in https://launchpad.net/malone/bugs/21787 From mail at carthik.net Wed Apr 12 23:59:28 2006 From: mail at carthik.net (Carthik Sharma) Date: Wed, 12 Apr 2006 23:59:28 -0000 Subject: [Bug 21784] Re: Does not find my USB 2.0 flash drive in USB 2.0 ports References: <20060113141444.21012.1067.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060412235928.31677.29108.malone@gandwana.ubuntu.com> Thank you for reporting this bug and following up on it. I am marking this bug Closed since there has been no response from you for over three months. We would like to fix all existing issues, but need need feedback to help with debugging. Should you still have a problem with the latest up to date Dapper kernel and packages, please reopen this bug. In this case, please answer the questions that have already been asked of you before and provide the log files and information required for debugging. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Needs Info => Rejected -- Does not find my USB 2.0 flash drive in USB 2.0 ports https://launchpad.net/malone/bugs/21784 From mail at carthik.net Wed Apr 12 23:59:46 2006 From: mail at carthik.net (Carthik Sharma) Date: Wed, 12 Apr 2006 23:59:46 -0000 Subject: [Bug 21777] Re: Hibernate causes a kernel oops on a hyperthreaded P4 laptop using SMP kernel References: <20060113141441.21012.58289.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060412235946.15408.68449.malone@gangotri.ubuntu.com> Thank you for reporting this bug and following up on it. I am marking this bug Closed since there has been no response from you for over three months. We would like to fix all existing issues, but need need feedback to help with debugging. Should you still have a problem with the latest up to date Dapper kernel and packages, please reopen this bug. In this case, please answer the questions that have already been asked of you before and provide the log files and information required for debugging. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Needs Info => Rejected -- Hibernate causes a kernel oops on a hyperthreaded P4 laptop using SMP kernel https://launchpad.net/malone/bugs/21777 From mail at carthik.net Thu Apr 13 00:00:09 2006 From: mail at carthik.net (Carthik Sharma) Date: Thu, 13 Apr 2006 00:00:09 -0000 Subject: [Bug 21607] Re: Breezy Preview 1: snd-cmi8330 ALSA driver broken References: <20060113141348.21012.57213.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060413000010.15436.56072.malone@gangotri.ubuntu.com> Thank you for reporting this bug and following up on it. I am marking this bug Closed since there has been no response from you for over three months. We would like to fix all existing issues, but need need feedback to help with debugging. Should you still have a problem with the latest up to date Dapper kernel and packages, please reopen this bug. In this case, please answer the questions that have already been asked of you before and provide the log files and information required for debugging. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Needs Info => Rejected -- Breezy Preview 1: snd-cmi8330 ALSA driver broken https://launchpad.net/malone/bugs/21607 From mail at carthik.net Thu Apr 13 00:00:31 2006 From: mail at carthik.net (Carthik Sharma) Date: Thu, 13 Apr 2006 00:00:31 -0000 Subject: [Bug 21589] Re: 2.6 kernel no boot with single drive RAID References: <20060113141339.21012.94883.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060413000031.31677.3303.malone@gandwana.ubuntu.com> Thank you for reporting this bug and following up on it. I am marking this bug Closed since there has been no response from you for over three months. We would like to fix all existing issues, but need need feedback to help with debugging. Should you still have a problem with the latest up to date Dapper kernel and packages, please reopen this bug. In this case, please answer the questions that have already been asked of you before and provide the log files and information required for debugging. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Needs Info => Rejected -- 2.6 kernel no boot with single drive RAID https://launchpad.net/malone/bugs/21589 From mail at carthik.net Thu Apr 13 00:00:57 2006 From: mail at carthik.net (Carthik Sharma) Date: Thu, 13 Apr 2006 00:00:57 -0000 Subject: [Bug 21457] Re: Kernel bug while hibernating on Dell inspiron 600m References: <20060113141256.21012.70531.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060413000058.15436.13799.malone@gangotri.ubuntu.com> Thank you for reporting this bug and following up on it. I am marking this bug Closed since there has been no response from you for over three months. We would like to fix all existing issues, but need need feedback to help with debugging. Should you still have a problem with the latest up to date Dapper kernel and packages, please reopen this bug. In this case, please answer the questions that have already been asked of you before and provide the log files and information required for debugging. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Needs Info => Rejected -- Kernel bug while hibernating on Dell inspiron 600m https://launchpad.net/malone/bugs/21457 From mail at carthik.net Thu Apr 13 00:01:14 2006 From: mail at carthik.net (Carthik Sharma) Date: Thu, 13 Apr 2006 00:01:14 -0000 Subject: [Bug 21451] Re: Reiser crash References: <20060113141254.21012.66970.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060413000114.15436.77641.malone@gangotri.ubuntu.com> Thank you for reporting this bug and following up on it. I am marking this bug Closed since there has been no response from you for over three months. We would like to fix all existing issues, but need need feedback to help with debugging. Should you still have a problem with the latest up to date Dapper kernel and packages, please reopen this bug. In this case, please answer the questions that have already been asked of you before and provide the log files and information required for debugging. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Needs Info => Rejected -- Reiser crash https://launchpad.net/malone/bugs/21451 From mail at carthik.net Thu Apr 13 00:01:41 2006 From: mail at carthik.net (Carthik Sharma) Date: Thu, 13 Apr 2006 00:01:41 -0000 Subject: [Bug 21324] Re: Reboot fails in vmware References: <20060113141213.21012.54180.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060413000141.15436.97578.malone@gangotri.ubuntu.com> Thank you for reporting this bug and following up on it. I am marking this bug Closed since there has been no response from you for over three months. We would like to fix all existing issues, but need need feedback to help with debugging. Should you still have a problem with the latest up to date Dapper kernel and packages, please reopen this bug. In this case, please answer the questions that have already been asked of you before and provide the log files and information required for debugging. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Needs Info => Rejected -- Reboot fails in vmware https://launchpad.net/malone/bugs/21324 From mail at carthik.net Thu Apr 13 00:02:01 2006 From: mail at carthik.net (Carthik Sharma) Date: Thu, 13 Apr 2006 00:02:01 -0000 Subject: [Bug 21323] Re: Breezy Preview - No laptop speaker output, headphone works References: <20060113141213.21012.86362.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060413000201.31651.32310.malone@gandwana.ubuntu.com> Thank you for reporting this bug and following up on it. I am marking this bug Closed since there has been no response from you for over three months. We would like to fix all existing issues, but need need feedback to help with debugging. Should you still have a problem with the latest up to date Dapper kernel and packages, please reopen this bug. In this case, please answer the questions that have already been asked of you before and provide the log files and information required for debugging. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Needs Info => Rejected -- Breezy Preview - No laptop speaker output, headphone works https://launchpad.net/malone/bugs/21323 From mail at carthik.net Thu Apr 13 00:06:24 2006 From: mail at carthik.net (Carthik Sharma) Date: Thu, 13 Apr 2006 00:06:24 -0000 Subject: [Bug 21447] Re: Breezy 5.10 Preview installer requires vga=771 to function on ATI X300 References: <20060113141253.21012.95308.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060413000625.15408.40168.malone@gangotri.ubuntu.com> Thank you for reporting this bug and following up on it. I am marking this bug Closed since there has been no response from you for over three months. We would like to fix all existing issues, but need need feedback to help with debugging. Should you still have a problem with the latest up to date Dapper kernel and packages, please reopen this bug. In this case, please answer the questions that have already been asked of you before and provide the log files and information required for debugging. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Needs Info => Rejected -- Breezy 5.10 Preview installer requires vga=771 to function on ATI X300 https://launchpad.net/malone/bugs/21447 From mail at carthik.net Thu Apr 13 00:07:58 2006 From: mail at carthik.net (Carthik Sharma) Date: Thu, 13 Apr 2006 00:07:58 -0000 Subject: [Bug 21057] Re: Sound from ES1978 Maestro 2E garbled when USB CD-ROM drive plugged in References: <20060113141036.21012.76826.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060413000758.15436.3734.malone@gangotri.ubuntu.com> This bug has been confirmed by many folks. Changing to Confirmed. Thank you. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Needs Info => Confirmed -- Sound from ES1978 Maestro 2E garbled when USB CD-ROM drive plugged in https://launchpad.net/malone/bugs/21057 From mail at carthik.net Thu Apr 13 00:08:38 2006 From: mail at carthik.net (Carthik Sharma) Date: Thu, 13 Apr 2006 00:08:38 -0000 Subject: [Bug 21038] Re: HP DV4121AP CD/DVDRW Troubles References: <20060113141031.21012.99927.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060413000838.15408.63989.malone@gangotri.ubuntu.com> Thank you for reporting this bug and following up on it. I am marking this bug Closed since there has been no response from you for over three months. We would like to fix all existing issues, but need need feedback to help with debugging. Should you still have a problem with the latest up to date Dapper kernel and packages, please reopen this bug. In this case, please answer the questions that have already been asked of you before and provide the log files and information required for debugging. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Needs Info => Rejected -- HP DV4121AP CD/DVDRW Troubles https://launchpad.net/malone/bugs/21038 From mail at carthik.net Thu Apr 13 00:12:16 2006 From: mail at carthik.net (Carthik Sharma) Date: Thu, 13 Apr 2006 00:12:16 -0000 Subject: [Bug 19726] Re: Installation impossible on Toshiba Libretto L5 due to video corruption References: <20060113140309.21012.29443.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060413001216.31651.82865.malone@gandwana.ubuntu.com> Thank you for reporting this bug and following up on it. I am marking this bug Closed since there has been no response from you for over three months. We would like to fix all existing issues, but need need feedback to help with debugging. Should you still have a problem with the latest up to date Dapper kernel and packages, please reopen this bug. In this case, please answer the questions that have already been asked of you before and provide the log files and information required for debugging. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Needs Info => Rejected -- Installation impossible on Toshiba Libretto L5 due to video corruption https://launchpad.net/malone/bugs/19726 From mail at carthik.net Thu Apr 13 00:11:59 2006 From: mail at carthik.net (Carthik Sharma) Date: Thu, 13 Apr 2006 00:11:59 -0000 Subject: [Bug 19681] Re: No irda on laptop (VIA chipset) References: <20060113140255.21012.84256.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060413001159.31651.54614.malone@gandwana.ubuntu.com> Thank you for reporting this bug and following up on it. I am marking this bug Closed since there has been no response from you for over three months. We would like to fix all existing issues, but need need feedback to help with debugging. Should you still have a problem with the latest up to date Dapper kernel and packages, please reopen this bug. In this case, please answer the questions that have already been asked of you before and provide the log files and information required for debugging. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Needs Info => Rejected -- No irda on laptop (VIA chipset) https://launchpad.net/malone/bugs/19681 From mail at carthik.net Thu Apr 13 00:11:40 2006 From: mail at carthik.net (Carthik Sharma) Date: Thu, 13 Apr 2006 00:11:40 -0000 Subject: [Bug 19106] Re: Framebuffer broken on IBM TP R50P References: <20060113135949.21012.79549.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060413001140.31677.78237.malone@gandwana.ubuntu.com> Thank you for reporting this bug and following up on it. I am marking this bug Closed since there has been no response from you for over three months. We would like to fix all existing issues, but need need feedback to help with debugging. Should you still have a problem with the latest up to date Dapper kernel and packages, please reopen this bug. In this case, please answer the questions that have already been asked of you before and provide the log files and information required for debugging. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Needs Info => Rejected -- Framebuffer broken on IBM TP R50P https://launchpad.net/malone/bugs/19106 From mail at carthik.net Thu Apr 13 00:11:08 2006 From: mail at carthik.net (Carthik Sharma) Date: Thu, 13 Apr 2006 00:11:08 -0000 Subject: [Bug 18418] Re: orinoco wifi pcmcia hangs live cd References: <20060113135620.21012.19854.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060413001108.31677.56880.malone@gandwana.ubuntu.com> Thank you for reporting this bug and following up on it. I am marking this bug Closed since there has been no response from you for over three months. We would like to fix all existing issues, but need need feedback to help with debugging. Should you still have a problem with the latest up to date Dapper kernel and packages, please reopen this bug. In this case, please answer the questions that have already been asked of you before and provide the log files and information required for debugging. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Needs Info => Rejected -- orinoco wifi pcmcia hangs live cd https://launchpad.net/malone/bugs/18418 From mail at carthik.net Thu Apr 13 00:10:48 2006 From: mail at carthik.net (Carthik Sharma) Date: Thu, 13 Apr 2006 00:10:48 -0000 Subject: [Bug 18403] Re: Kernel Panic upon removal of Atheros card from Cisco References: <20060113135616.21012.61444.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060413001048.31677.73089.malone@gandwana.ubuntu.com> Thank you for reporting this bug and following up on it. I am marking this bug Closed since there has been no response from you for over three months. We would like to fix all existing issues, but need need feedback to help with debugging. Should you still have a problem with the latest up to date Dapper kernel and packages, please reopen this bug. In this case, please answer the questions that have already been asked of you before and provide the log files and information required for debugging. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Needs Info => Rejected -- Kernel Panic upon removal of Atheros card from Cisco https://launchpad.net/malone/bugs/18403 From launchpad at jonobacon.org Thu Apr 13 00:21:09 2006 From: launchpad at jonobacon.org (Jono Bacon) Date: Thu, 13 Apr 2006 00:21:09 -0000 Subject: [Bug 39362] SD reader/writer on Sony Vaio TX1XP does not work References: <20060413002109.31677.4898.malonedeb@gandwana.ubuntu.com> Message-ID: <20060413002109.31677.4898.malonedeb@gandwana.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 kernel-image-2.6.15-20-386-di (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: Build into the Sony Vaio VGN-TX1XP is a SD reader/writer, and it does not work. I put an SD card in the slot and nothing happens - it should really put a device icon on the desktop. This is tested in Dapper with Linux ubuntu 2.6.15-20-386 #1 PREEMPT Tue Apr 4 17:48:51 UTC 2006 i686 GNU/Linux jono at ubuntu:~$ lspci 0000:00:00.0 Host bridge: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller (rev 03) 0000:00:02.0 VGA compatible controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 03) 0000:00:02.1 Display controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 03) 0000:00:1b.0 0403: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller (rev 03) 0000:00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 03) 0000:00:1d.1 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 03) 0000:00:1d.2 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 03) 0000:00:1d.3 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 (rev 03) 0000:00:1d.7 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 03) 0000:00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev d3) 0000:00:1f.0 ISA bridge: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge (rev 03) 0000:00:1f.1 IDE interface: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) IDE Controller (rev 03) 0000:00:1f.3 SMBus: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller (rev 03) 0000:06:05.0 CardBus bridge: Texas Instruments PCIxx21/x515 Cardbus Controller 0000:06:05.2 FireWire (IEEE 1394): Texas Instruments OHCI Compliant IEEE 1394 Host Controller 0000:06:05.3 Mass storage controller: Texas Instruments PCIxx21 Integrated FlashMedia Controller 0000:06:08.0 Ethernet controller: Intel Corporation 82562EM/EX/GX - PRO/100 VM (LOM) Ethernet Controller Mobile (rev 03) 0000:06:0b.0 Network controller: Intel Corporation PRO/Wireless 2200BG (rev 05) There are no /dev/sd* devices and when I insert and remove the card, nothing seems to appear in dmesg or when I run tail -f /var/log/syslog -- SD reader/writer on Sony Vaio TX1XP does not work https://launchpad.net/malone/bugs/39362 From launchpad at rtr.ca Thu Apr 13 00:35:23 2006 From: launchpad at rtr.ca (Mark Lord) Date: Thu, 13 Apr 2006 00:35:23 -0000 Subject: [Bug 21447] Re: Breezy 5.10 Preview installer requires vga=771 to function on ATI X300 References: <20060113141253.21012.95308.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060413003523.15436.72473.malone@gangotri.ubuntu.com> Well, that's certainly a pretty snarky way to say "we are not going to fix Breezy, wait for Dapper instead". Blame it on the bug reporter. Sheesh! Cheers -- Breezy 5.10 Preview installer requires vga=771 to function on ATI X300 https://launchpad.net/malone/bugs/21447 From samth at ccs.neu.edu Thu Apr 13 00:45:34 2006 From: samth at ccs.neu.edu (sam th) Date: Thu, 13 Apr 2006 00:45:34 -0000 Subject: [Bug 22184] Re: Occasional hard lockups on T43 Thinkpad References: <20060113141653.21012.20891.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060413004534.15436.52059.malone@gangotri.ubuntu.com> I have not experienced this problem in quite some time, so something has fixed it. Thanks. -- Occasional hard lockups on T43 Thinkpad https://launchpad.net/malone/bugs/22184 From shmoolikipod at gmail.com Thu Apr 13 01:02:25 2006 From: shmoolikipod at gmail.com (Shmoolik Sayag) Date: Thu, 13 Apr 2006 01:02:25 -0000 Subject: [Bug 27413] Re: it8212 ide controller support not available in Breezy References: <20060113145424.21012.29488.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060413010225.31677.82570.malone@gandwana.ubuntu.com> sorry to say this :\ but as i can c from the beta the it8212 ide controller it not supported :\ -- it8212 ide controller support not available in Breezy https://launchpad.net/malone/bugs/27413 From mrxoliver at hotmail.com Thu Apr 13 01:32:34 2006 From: mrxoliver at hotmail.com (mrxoliver) Date: Thu, 13 Apr 2006 01:32:34 -0000 Subject: [Bug 39347] F6 - rt2500 chipset - no dhcp References: <20060412212250.31677.33128.malonedeb@gandwana.ubuntu.com> Message-ID: <20060413013234.15408.42734.launchpad@canonical@gangotri.ubuntu.com> Public bug reported: Affects: linux-meta (Ubuntu) Severity: Normal Priority: (none set) Status: Needs Info Description: When running the live cd, the networks available appear (first distro i've seen do this), but when you click to access the network, the dhcp runs for a while, but does not detect anything. Public bug reported: Affects: linux-meta (Ubuntu) Severity: Normal Priority: (none set) Status: Needs Info Description: When running the live cd, the networks available appear (first distro i've seen do this), but when you click to access the network, the dhcp runs for a while, but does not detect anything. -- F6 - rt2500 chipset - no dhcp https://launchpad.net/malone/bugs/39347 From neumann at lostwebsite.net Thu Apr 13 01:32:33 2006 From: neumann at lostwebsite.net (Francois-Denis Gonthier) Date: Thu, 13 Apr 2006 01:32:33 -0000 Subject: [Bug 39347] Re: F6 - rt2500 chipset - no dhcp References: <20060412212250.31677.33128.malonedeb@gandwana.ubuntu.com> Message-ID: <20060413013234.15408.4162.malone@gangotri.ubuntu.com> We will need more information on your hardware, as much as you can provide, in order to work on this bug. ** Changed in: Ubuntu Sourcepackagename: None => linux-meta Status: Unconfirmed => Needs Info -- F6 - rt2500 chipset - no dhcp https://launchpad.net/malone/bugs/39347 From cmdetzel at cox.net Thu Apr 13 04:31:04 2006 From: cmdetzel at cox.net (C. Matt Detzel) Date: Thu, 13 Apr 2006 04:31:04 -0000 Subject: [Bug 20781] Re: pcmcia detection locks up my laptop [also dapper flight 5] References: <20060113140912.21012.22149.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060413043104.31651.93541.malone@gandwana.ubuntu.com> I think I'm having same problem, though with Flight 6 live cd. Hangs requiring reboot during gdm load -- I get a mouse cursor and a background, but nothing else. System is an Averatec 3250HX laptop w/ 1GB ram, mobile athlonxp proc. -- pcmcia detection locks up my laptop [also dapper flight 5] https://launchpad.net/malone/bugs/20781 From msoulier at digitaltorque.ca Thu Apr 13 04:41:13 2006 From: msoulier at digitaltorque.ca (Michael P. Soulier) Date: Thu, 13 Apr 2006 04:41:13 -0000 Subject: [Bug 18285] Re: APM resume fails under 2.6.10, works under 2.6.8.1? References: <20060113135537.21012.98627.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060413044114.31651.52785.malone@gandwana.ubuntu.com> Just confirming that in breezy, under 2.6.12, unsuspending with apm appears to be working again. -- APM resume fails under 2.6.10, works under 2.6.8.1? https://launchpad.net/malone/bugs/18285 From ivanradigalescreus at gmail.com Thu Apr 13 06:05:16 2006 From: ivanradigalescreus at gmail.com (Ivan) Date: Thu, 13 Apr 2006 06:05:16 -0000 Subject: [Bug 39353] Wireless don't work in my laptop References: <20060412221249.31677.83944.malonedeb@gandwana.ubuntu.com> Message-ID: <20060413060516.31651.99201.launchpad@canonical@gandwana.ubuntu.com> Public bug reported: Affects: ndiswrapper (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: I have an Acer Aspire 3003WLMi with a Broadcom wireless card. I'm using ndiswrapper in Ubuntu stable 5.10 and it works well. In Ubuntu 6.06 I can see the wireless card but I can't connect to any wireless net. I try to install ndiswrapper-utils and configure the driver (as in Ubuntu 5.10) but I can't see the new driver wlan0 made by ndiswrapper, and of course I can't connect to the wireless net. In the console 1 I can see than the file bcm43xx_microcode5.fw doesn't exist. Public bug reported: Affects: ndiswrapper (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: I have an Acer Aspire 3003WLMi with a Broadcom wireless card. I'm using ndiswrapper in Ubuntu stable 5.10 and it works well. In Ubuntu 6.06 I can see the wireless card but I can't connect to any wireless net. I try to install ndiswrapper-utils and configure the driver (as in Ubuntu 5.10) but I can't see the new driver wlan0 made by ndiswrapper, and of course I can't connect to the wireless net. In the console 1 I can see than the file bcm43xx_microcode5.fw doesn't exist. -- Wireless don't work in my laptop https://launchpad.net/malone/bugs/39353 From corey.burger at gmail.com Thu Apr 13 06:05:16 2006 From: corey.burger at gmail.com (Corey Burger) Date: Thu, 13 Apr 2006 06:05:16 -0000 Subject: [Bug 39353] Re: Wireless don't work in my laptop References: <20060412221249.31677.83944.malonedeb@gandwana.ubuntu.com> Message-ID: <20060413060516.31651.38683.launchpad@gandwana.ubuntu.com> ** Changed in: Ubuntu Sourcepackagename: None => ndiswrapper -- Wireless don't work in my laptop https://launchpad.net/malone/bugs/39353 From karvinen+launchpad at iki.fi Thu Apr 13 06:17:01 2006 From: karvinen+launchpad at iki.fi (Tero Karvinen) Date: Thu, 13 Apr 2006 06:17:01 -0000 Subject: [Bug 38856] Re: Complete freeze on boot References: <20060409112318.32233.90923.malonedeb@gandwana.ubuntu.com> Message-ID: <20060413061701.15436.8089.launchpad@gangotri.ubuntu.com> ** Attachment added: "lspci -v on 3004WTMi" http://librarian.launchpad.net/2075815/lspci-v-2004wtmi-dapperf6-2006-04-13.txt -- Complete freeze on boot https://launchpad.net/malone/bugs/38856 From sitsofe at yahoo.com Thu Apr 13 06:42:39 2006 From: sitsofe at yahoo.com (Sitsofe Wheeler) Date: Thu, 13 Apr 2006 06:42:39 -0000 Subject: [Bug 38937] Re: Kernel being noisy at boottime References: <20060409223348.24516.87248.malonedeb@gangotri.ubuntu.com> Message-ID: <20060413064240.31651.24115.malone@gandwana.ubuntu.com> The messages seem harmless and it could be just the kernel tries to access them before a part of your system is ready (but this is just speculation on my part). You can try booting with a disk in the drive and see whether the errors go away... ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Needs Info => Unconfirmed -- Kernel being noisy at boottime https://launchpad.net/malone/bugs/38937 From sitsofe at yahoo.com Thu Apr 13 06:53:18 2006 From: sitsofe at yahoo.com (Sitsofe Wheeler) Date: Thu, 13 Apr 2006 06:53:18 -0000 Subject: [Bug 38859] Re: The boot CD does not work on Cyrix References: <20060409115532.32233.49614.malonedeb@gandwana.ubuntu.com> Message-ID: <20060413065318.3651.27327.launchpad@gangotri.ubuntu.com> ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Unconfirmed => Needs Info -- The boot CD does not work on Cyrix https://launchpad.net/malone/bugs/38859 From t.harley at laposte.net Thu Apr 13 06:53:28 2006 From: t.harley at laposte.net (Topper) Date: Thu, 13 Apr 2006 06:53:28 -0000 Subject: [Bug 32304] Re: Kernel panic at intermittent times References: <20060221140456.23543.11246.malonedeb@gandwana.ubuntu.com> Message-ID: <20060413065328.13165.86859.malone@gandwana.ubuntu.com> Still experiencing the same random freezes here with kernel 2.6.15-20 (SMP) on ubuntu dapper. Many threads on ubuntuforums show a coincidence with the rt2500 wireless chipset. Uptimes vary from few minutes to 1+ day, regardless of activity. No entry in the logs after the crash, everything locks hard. A glimpse on serialmonkey forums (rt2500 developpment) shows that there may be incompatibility issues with rt2500 GPL driver and SMP preempt. Hope it helps. -- Kernel panic at intermittent times https://launchpad.net/malone/bugs/32304 From sitsofe at yahoo.com Thu Apr 13 06:57:13 2006 From: sitsofe at yahoo.com (Sitsofe Wheeler) Date: Thu, 13 Apr 2006 06:57:13 -0000 Subject: [Bug 38780] Re: Floppy module NOT loaded References: <20060408194430.24486.53632.malonedeb@gangotri.ubuntu.com> Message-ID: <20060413065713.13165.13255.launchpad@gandwana.ubuntu.com> ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Needs Info => Unconfirmed -- Floppy module NOT loaded https://launchpad.net/malone/bugs/38780 From sitsofe at yahoo.com Thu Apr 13 07:06:06 2006 From: sitsofe at yahoo.com (Sitsofe Wheeler) Date: Thu, 13 Apr 2006 07:06:06 -0000 Subject: [Bug 39114] Re: prism WLAN Card firmware problem References: <20060411104452.24486.61371.malonedeb@gangotri.ubuntu.com> Message-ID: <20060413070606.13139.24775.malone@gandwana.ubuntu.com> Might be related to Bug #38278 -- prism WLAN Card firmware problem https://launchpad.net/malone/bugs/39114 From mark at veravirtus.com Thu Apr 13 08:28:58 2006 From: mark at veravirtus.com (Mark Manashirov) Date: Thu, 13 Apr 2006 08:28:58 -0000 Subject: [Bug 22599] Re: enabling DMA on CD-ROMs causes hal failures References: <20060113141913.21012.8978.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060413082858.13165.35841.malone@gandwana.ubuntu.com> With the latest stock Dapper kernel (2.6.15-20) I'm not seeing any "hdc: lost interrupt" messages nor does my shell become unresponsive after many (3+) suspend cycles. I think I may have figured out what was causing my initial problem though. By unloading ohci1394 I'm able to resume from the second cycle and beyond. I noticed this when testing with the vanilla kernel. I initially thought it was fixed, but I only configured a kernel with minimal support. With full support I had the same problem. After a lot of experimenting, I narrowed it down to ohci1394. So, the DMA/CDROM seems to be working fine (I hope), and unloading/reloading ohci1394 doesn't seem to cause problems. I don't use firewire though so I can't really test it. -- enabling DMA on CD-ROMs causes hal failures https://launchpad.net/malone/bugs/22599 From martin.bergner at online.de Thu Apr 13 08:33:06 2006 From: martin.bergner at online.de (Martin Bergner) Date: Thu, 13 Apr 2006 08:33:06 -0000 Subject: [Bug 35213] Re: hibernate fails when not on AC power on HP Pavilion ZT3000 - regression from breezy References: <20060316170910.6510.54248.malonedeb@gangotri.ubuntu.com> Message-ID: <20060413083306.3682.84882.malone@gangotri.ubuntu.com> I want a little bit of clarification: Do you both get the same issue I described or the issue the original reporter described, i. e. does it work and just takes a long time or doesn't it work at all. If you want to try that, prepare to leave your laptop sitting there for 30 minutes or so. And as a side note, this is still present in 2.6.15-20 in dapper. -- hibernate fails when not on AC power on HP Pavilion ZT3000 - regression from breezy https://launchpad.net/malone/bugs/35213 From sebastian_kapfer at gmx.net Thu Apr 13 10:38:13 2006 From: sebastian_kapfer at gmx.net (Sebastian Kapfer) Date: Thu, 13 Apr 2006 10:38:13 -0000 Subject: [Bug 38673] Re: prism54 driver requires new firmware name References: <20060407232751.24516.74228.malonedeb@gangotri.ubuntu.com> Message-ID: <20060413103813.3682.45865.malone@gangotri.ubuntu.com> *** This bug is a duplicate of bug 38278 *** Copying the firmware does _not_ work for me, so please don't consider this as a workaround :-) (The card will complain about an invalid bootloader and not work). -- prism54 driver requires new firmware name https://launchpad.net/malone/bugs/38673 From sebastian_kapfer at gmx.net Thu Apr 13 10:39:33 2006 From: sebastian_kapfer at gmx.net (Sebastian Kapfer) Date: Thu, 13 Apr 2006 10:39:33 -0000 Subject: [Bug 38673] Re: prism54 driver requires new firmware name References: <20060407232751.24516.74228.malonedeb@gangotri.ubuntu.com> Message-ID: <20060413103933.13165.84047.malone@gandwana.ubuntu.com> *** This bug is a duplicate of bug 38278 *** To be more complete: Blacklisting the isl* drivers and using prism54 does work. ISL3890 here, same lspci output asin the other dupes. -- prism54 driver requires new firmware name https://launchpad.net/malone/bugs/38673 From bmw at internode.on.net Thu Apr 13 10:47:03 2006 From: bmw at internode.on.net (Barney) Date: Thu, 13 Apr 2006 10:47:03 -0000 Subject: [Bug 33096] Re: "DVICO Fusion HDTV DVB Plus" tv tuner card will not lock on to channel References: <20060227230332.16580.85365.malonedeb@gandwana.ubuntu.com> Message-ID: <20060413104703.3682.4439.malone@gangotri.ubuntu.com> Upstream doesn't address the issue of the 0x61, or didn't at the time I raised the bug. I didn't find the previous bugs that changed the value until after I rasied this one - I just thought it was a typo in the dapper because I couldn't find a version of the kernel tree that had the change in it. The whole issue of the same card type having different versions with the same id is annoying, my other tv card has the same problem - It is a low profile version with a totally different tuner module, but the card id is the same as the non low profile version. Probably the fix would be to have both versions in the code and one version needs to be explicitly defined by passing the card type to the module at run time. This is how I get around the issue with my other card, because the reference card config works for it. eg: case CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_PLUS_V2: dev->core->pll_addr = 0x61; ... Then you manually specify the corresponding number for V2 as a parameter when the module is loaded, if you have the card that needs the alternate configuration. I wonder if upstream even know if there are 2 versions of this card... -- "DVICO Fusion HDTV DVB Plus" tv tuner card will not lock on to channel https://launchpad.net/malone/bugs/33096 From daniel.holbach at ubuntu.com Thu Apr 13 10:52:59 2006 From: daniel.holbach at ubuntu.com (Daniel Holbach) Date: Thu, 13 Apr 2006 10:52:59 -0000 Subject: [Bug 38795] Re: Gnome Battery Charge Monitor not giving estimated time remaining References: <20060408223823.32313.26543.malonedeb@gandwana.ubuntu.com> Message-ID: <20060413105259.3651.52945.malone@gangotri.ubuntu.com> I forwarded your comment. ** Changed in: linux-source (Ubuntu) Sourcepackagename: linux-source => linux-source-2.6.15 Assignee: (unassigned) => Kernel Bugs -- Gnome Battery Charge Monitor not giving estimated time remaining https://launchpad.net/malone/bugs/38795 From ubuntu-bugs at henrik.synth.no Thu Apr 13 12:00:23 2006 From: ubuntu-bugs at henrik.synth.no (neu) Date: Thu, 13 Apr 2006 12:00:23 -0000 Subject: [Bug 39432] Cannot activate dma on hard drive References: <20060413120023.13165.28701.malonedeb@gandwana.ubuntu.com> Message-ID: <20060413120023.13165.28701.malonedeb@gandwana.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: With kernel 2.6.12-10 and 2.6.15-20 (and probably others), I am not able to enable DMA on my hard drive. $ sudo hdparm -d1 /dev/hda /dev/hda: setting using_dma to 1 (on) HDIO_SET_DMA failed: Operation not permitted using_dma = 0 (off) With a vanilla kernel from kernel.org (2.6.15.7), hard drive DMA works like it should. I have a Intel Corporation 82440MX EIDE Controller (8086:7199) interface, and the piix module is loaded. -- Cannot activate dma on hard drive https://launchpad.net/malone/bugs/39432 From mrxoliver at hotmail.com Thu Apr 13 12:31:36 2006 From: mrxoliver at hotmail.com (mrxoliver) Date: Thu, 13 Apr 2006 12:31:36 -0000 Subject: [Bug 39347] Re: F6 - rt2500 chipset - no dhcp References: <20060412212250.31677.33128.malonedeb@gandwana.ubuntu.com> Message-ID: <20060413123136.3651.20359.malone@gangotri.ubuntu.com> I can't find out much more about the manafacturer of the wireless card as it is ebuyer value (it's PCI), my mother board is an nVidia nForce2 and I'm afraid that's all I can seem to find out about that either as hwifo just reads everything as being manafactured by eveshamvale. I am going to try out the install cd shortly, thanks. -- F6 - rt2500 chipset - no dhcp https://launchpad.net/malone/bugs/39347 From ben.collins at ubuntu.com Thu Apr 13 13:48:18 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Thu, 13 Apr 2006 13:48:18 -0000 Subject: [Bug 38688] Re: unable to boot References: <20060408070420.32313.56814.malonedeb@gandwana.ubuntu.com> Message-ID: <20060413134818.13165.98305.malone@gandwana.ubuntu.com> Can you send the output of "cat /proc/ioports"? -- unable to boot https://launchpad.net/malone/bugs/38688 From ben.collins at ubuntu.com Thu Apr 13 13:53:10 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Thu, 13 Apr 2006 13:53:10 -0000 Subject: [Bug 38766] Re: [bcm43xx] Wireless not properly detected. References: <20060408175151.24516.78847.malonedeb@gangotri.ubuntu.com> Message-ID: <20060413135311.13165.39107.malone@gandwana.ubuntu.com> This is a simple case of not having the firmware installed. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Unconfirmed => Rejected -- [bcm43xx] Wireless not properly detected. https://launchpad.net/malone/bugs/38766 From ben.collins at ubuntu.com Thu Apr 13 14:06:58 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Thu, 13 Apr 2006 14:06:58 -0000 Subject: [Bug 36345] Re: speedstep won't load on ThinkPad T20 and s30 (mobile coppermine Pentium 3) References: <20060324063345.5380.9894.malonedeb@gangotri.ubuntu.com> Message-ID: <20060413140658.13139.96034.malone@gandwana.ubuntu.com> There's only two reasons this driver will return an ENODEV. 1) It doesn't detect a proper CPU. You have a PIII_C, which means this likely isn't the problem. 2) It detects and incorrect IST signature. This is likely the problem. It's not a kernel bug, however. -- speedstep won't load on ThinkPad T20 and s30 (mobile coppermine Pentium 3) https://launchpad.net/malone/bugs/36345 From ben.collins at ubuntu.com Thu Apr 13 14:08:04 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Thu, 13 Apr 2006 14:08:04 -0000 Subject: [Bug 36345] Re: speedstep won't load on ThinkPad T20 and s30 (mobile coppermine Pentium 3) References: <20060324063345.5380.9894.malonedeb@gangotri.ubuntu.com> Message-ID: <20060413140804.13139.30538.malone@gandwana.ubuntu.com> I'm going to try to get you a kernel today compiled with cpufreq debug enabled so we can verify this. If it's the IST signature, then it's a hardware issue, in which you'll need to define the correct smi port and such. -- speedstep won't load on ThinkPad T20 and s30 (mobile coppermine Pentium 3) https://launchpad.net/malone/bugs/36345 From ben.collins at ubuntu.com Thu Apr 13 14:13:13 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Thu, 13 Apr 2006 14:13:13 -0000 Subject: [Bug 39432] Re: Cannot activate dma on hard drive References: <20060413120023.13165.28701.malonedeb@gandwana.ubuntu.com> Message-ID: <20060413141313.13165.43002.malone@gandwana.ubuntu.com> Please attach (do no paste in comment) the output from dmesg. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Unconfirmed => Needs Info -- Cannot activate dma on hard drive https://launchpad.net/malone/bugs/39432 From ben.collins at ubuntu.com Thu Apr 13 14:14:12 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Thu, 13 Apr 2006 14:14:12 -0000 Subject: [Bug 39362] Re: SD reader/writer on Sony Vaio TX1XP does not work References: <20060413002109.31677.4898.malonedeb@gandwana.ubuntu.com> Message-ID: <20060413141412.3682.89497.malone@gangotri.ubuntu.com> Can you attach (do no paste in comment) the complete output from dmesg please. ** Changed in: linux-source-2.6.15 kernel-image-2.6.15-20-386-di (Ubuntu) Status: Unconfirmed => Needs Info -- SD reader/writer on Sony Vaio TX1XP does not work https://launchpad.net/malone/bugs/39362 From ben.collins at ubuntu.com Thu Apr 13 14:16:04 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Thu, 13 Apr 2006 14:16:04 -0000 Subject: [Bug 39343] Re: ndiswrapper not working for intel 3945G in Dapper flight 6 References: <20060412204053.15436.55221.malonedeb@gangotri.ubuntu.com> Message-ID: <20060413141604.13139.50593.malone@gandwana.ubuntu.com> Looks like the Windows driver needs things that ndiswrapper doesn't provide. Sort of pointless, since I plan on having the 3945 linux driver in soon anyway. Can I close this bug, since we'll have a native driver soon (and there's already a bug report for that)? ** Changed in: linux-source-2.6.15 (Ubuntu) Severity: Normal => Wishlist -- ndiswrapper not working for intel 3945G in Dapper flight 6 https://launchpad.net/malone/bugs/39343 From ben.collins at ubuntu.com Thu Apr 13 14:18:01 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Thu, 13 Apr 2006 14:18:01 -0000 Subject: [Bug 39338] Re: [dapper] Tons of kernel error messages bring laptop to crawl: hermes @ f09fa000: Error -16 issuing command 0x010b. References: <20060412194713.31677.38583.malonedeb@gandwana.ubuntu.com> Message-ID: <20060413141802.13165.44673.malone@gandwana.ubuntu.com> Is this with latest dapper kernel (-20)? ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Unconfirmed => Needs Info -- [dapper] Tons of kernel error messages bring laptop to crawl: hermes @ f09fa000: Error -16 issuing command 0x010b. https://launchpad.net/malone/bugs/39338 From ben.collins at ubuntu.com Thu Apr 13 14:20:29 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Thu, 13 Apr 2006 14:20:29 -0000 Subject: [Bug 39307] Re: Sonypi motioneye camera not recognized References: <20060412145624.15436.52451.malonedeb@gangotri.ubuntu.com> Message-ID: <20060413142029.3651.83065.malone@gangotri.ubuntu.com> Please confirm whether or not the suggestion worked for you. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Unconfirmed => Needs Info -- Sonypi motioneye camera not recognized https://launchpad.net/malone/bugs/39307 From ben.collins at ubuntu.com Thu Apr 13 14:21:00 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Thu, 13 Apr 2006 14:21:00 -0000 Subject: [Bug 39276] Re: Fails to compile using config from dapper References: <20060412095035.24516.46392.malonedeb@gangotri.ubuntu.com> Message-ID: <20060413142100.3682.6140.malone@gangotri.ubuntu.com> apt-get build-dep linux-source-2.6.15 ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Unconfirmed => Rejected -- Fails to compile using config from dapper https://launchpad.net/malone/bugs/39276 From ben.collins at ubuntu.com Thu Apr 13 14:21:49 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Thu, 13 Apr 2006 14:21:49 -0000 Subject: [Bug 39266] Re: Kernel error References: <20060412084440.32233.37859.malonedeb@gandwana.ubuntu.com> Message-ID: <20060413142149.3651.56407.malone@gangotri.ubuntu.com> Probably just a new warning. If there's nothing wrong with the system, I can't really do anything about it :) ** Changed in: linux-source-2.6.15 linux-image-2.6.15-20-386 (Ubuntu) Status: Unconfirmed => Rejected -- Kernel error https://launchpad.net/malone/bugs/39266 From ben.collins at ubuntu.com Thu Apr 13 14:22:43 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Thu, 13 Apr 2006 14:22:43 -0000 Subject: [Bug 39253] Re: Enter in hibernate mode ASUS W5F References: <20060412073041.32233.48934.malonedeb@gandwana.ubuntu.com> Message-ID: <20060413142243.13165.56448.malone@gandwana.ubuntu.com> Please let the machine wait for a few minutes. This is likely a dup of another bug. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Unconfirmed => Needs Info -- Enter in hibernate mode ASUS W5F https://launchpad.net/malone/bugs/39253 From tburmas at yahoo.com Thu Apr 13 14:25:52 2006 From: tburmas at yahoo.com (linuxted) Date: Thu, 13 Apr 2006 14:25:52 -0000 Subject: [Bug 27889] Re: [Bug 27889] Re: kernel does not detect usb 2.0 mp3 player References: <20060113151945.29386.70764.launchpad@macquarie.warthogs.hbd.com> <20060411165030.32233.6834.malone@gandwana.ubuntu.com> Message-ID: <20060413142552.28863.qmail@web33008.mail.mud.yahoo.com> Its funny that you send this email at this time as my mp3 player just stopped being detected over the weekend and I can't get it to work. If I revert to USB1.0, Linux can detect it, but it does not sync anymore. I'm at a loss. I'll see if there is a BIOS update. Thanks I-soumpasis-ami wrote: I found at the FAQ at http://www.linux-usb.org/ that some BIOS are old and cannot handle good enough the USB2.0 ports. So the solution proposed is to turn off the support for USB2.0 from BIOS or upgrade the BIOS. In my case I had problems with latest windoze (before I turn to linux) and an update of the linux kernel about last november (not reading USB memory stick). I turned off the usb 2.0 support and my devices are working. However, at the usb view I see only USB 1.0 ports, but all devices I have work properly. I hope I helped. -- kernel does not detect usb 2.0 mp3 player https://launchpad.net/malone/bugs/27889 --------------------------------- Blab-away for as little as 1¢/min. Make PC-to-Phone Calls using Yahoo! Messenger with Voice. -- kernel does not detect usb 2.0 mp3 player https://launchpad.net/malone/bugs/27889 From ben.collins at ubuntu.com Thu Apr 13 14:30:45 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Thu, 13 Apr 2006 14:30:45 -0000 Subject: [Bug 39185] Re: M-Audio Delta 1010LT SPDIF output does not work. References: <20060411193018.32313.43105.malonedeb@gandwana.ubuntu.com> Message-ID: <20060413143046.13139.81701.malone@gandwana.ubuntu.com> Looks like this has patches in current alsa CVS. Probably need to backport them. ** Changed in: linux-source-2.6.15 (Ubuntu) Assignee: (unassigned) => Ubuntu Audio Team ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Unconfirmed => Confirmed -- M-Audio Delta 1010LT SPDIF output does not work. https://launchpad.net/malone/bugs/39185 From ben.collins at ubuntu.com Thu Apr 13 14:31:47 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Thu, 13 Apr 2006 14:31:47 -0000 Subject: [Bug 39138] Re: PCI resource errors and unable to reboot system References: <20060411132552.24486.98960.malonedeb@gangotri.ubuntu.com> Message-ID: <20060413143147.13165.52448.malone@gandwana.ubuntu.com> Please attach (do no paste in comment) the entire output of dmesg. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Unconfirmed => Needs Info -- PCI resource errors and unable to reboot system https://launchpad.net/malone/bugs/39138 From ben.collins at ubuntu.com Thu Apr 13 14:32:22 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Thu, 13 Apr 2006 14:32:22 -0000 Subject: [Bug 39114] Re: prism WLAN Card firmware problem References: <20060411104452.24486.61371.malonedeb@gangotri.ubuntu.com> Message-ID: <20060413143222.3651.58494.launchpad@gangotri.ubuntu.com> *** This bug is a duplicate of bug 38278 *** ** This bug has been marked a duplicate of bug 38278 wifi card don't work. isl3886 is required but not installed -- prism WLAN Card firmware problem https://launchpad.net/malone/bugs/39114 From ben.collins at ubuntu.com Thu Apr 13 14:32:22 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Thu, 13 Apr 2006 14:32:22 -0000 Subject: [Bug 38278] Re: wifi card don't work. isl3886 is required but not installed References: <20060405203926.24486.7083.malonedeb@gangotri.ubuntu.com> Message-ID: <20060413143222.3651.31332.launchpad@gangotri.ubuntu.com> ** Bug 39114 has been marked a duplicate of this bug -- wifi card don't work. isl3886 is required but not installed https://launchpad.net/malone/bugs/38278 From avilella at gmail.com Thu Apr 13 14:39:31 2006 From: avilella at gmail.com (Albert Vilella) Date: Thu, 13 Apr 2006 14:39:31 -0000 Subject: [Bug 39307] Re: Sonypi motioneye camera not recognized References: <20060412145624.15436.52451.malonedeb@gangotri.ubuntu.com> Message-ID: <20060413143931.13139.11625.malone@gandwana.ubuntu.com> I haven't found any information regarding any standards about the video camera, apart from it being based on the M25U870 chip by MicroVision: http://www.mvision.co.jp/shohin_M25U870.htm So from Stelian comments I understand that there is no way right now to make this work, and there doesn't seem to be a clear route to make it work. -- Sonypi motioneye camera not recognized https://launchpad.net/malone/bugs/39307 From ben.collins at ubuntu.com Thu Apr 13 14:48:48 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Thu, 13 Apr 2006 14:48:48 -0000 Subject: [Bug 39083] Re: Laptop Fans are disabled after Flight 6 Upgrade References: <20060411041242.32313.142.malonedeb@gandwana.ubuntu.com> Message-ID: <20060413144848.3682.36332.malone@gangotri.ubuntu.com> This woiuld seem to be a power manager issue of some kind. The kernel just does what it is told :) ** Changed in: linux-source-2.6.15 linux-image-2.6.15-20-386 (Ubuntu) Sourcepackagename: linux-source-2.6.15 => gnome-power-manager Binarypackagename: linux-image-2.6.15-20-386 => None -- Laptop Fans are disabled after Flight 6 Upgrade https://launchpad.net/malone/bugs/39083 From ivoks at ubuntu.com Thu Apr 13 14:46:25 2006 From: ivoks at ubuntu.com (=?utf-8?q?Ante_Karamati=C4=87?=) Date: Thu, 13 Apr 2006 14:46:25 -0000 Subject: [Bug 36736] Re: Laptop doesn't wakeup after sleep References: <20060326141302.6279.83357.malonedeb@gandwana.ubuntu.com> Message-ID: <20060413144625.3651.90912.malone@gangotri.ubuntu.com> Please attach lspci and info about what video driver you are using. dmidecode would be nice too. Thanks ** Changed in: linux-source-2.6.15 (Ubuntu) Severity: Major => Normal Status: Unconfirmed => Needs Info -- Laptop doesn't wakeup after sleep https://launchpad.net/malone/bugs/36736 From ben.collins at ubuntu.com Thu Apr 13 14:57:57 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Thu, 13 Apr 2006 14:57:57 -0000 Subject: [Bug 38856] Re: Complete freeze on boot References: <20060409112318.32233.90923.malonedeb@gandwana.ubuntu.com> Message-ID: <20060413145757.3651.36652.malone@gangotri.ubuntu.com> Okay, I show a soft-lockup. Please try booting with irqpoll. Need to rule out that this may be a buggy driver (and maybe not yenta). Also, try booting with noapic, nolapic, and pci=noacpi ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Unconfirmed => Needs Info ** Summary changed: - Complete freeze on boot + [dapper] Soft lockup related to yenta IRQ handler -- [dapper] Soft lockup related to yenta IRQ handler https://launchpad.net/malone/bugs/38856 From agd5f at yahoo.com Thu Apr 13 15:01:57 2006 From: agd5f at yahoo.com (agd5f) Date: Thu, 13 Apr 2006 15:01:57 -0000 Subject: [Bug 36345] Re: speedstep won't load on ThinkPad T20 and s30 (mobile coppermine Pentium 3) References: <20060324063345.5380.9894.malonedeb@gangotri.ubuntu.com> Message-ID: <20060413150157.3651.8294.malone@gangotri.ubuntu.com> Thanks Ben. I appreciate it. I would have done it myself eventually, but I've been too busy with other things to get to it. If it ends up being the IST signature, how do I go about figuring out which ports and such I need? FWIW, I tried setting the ports as per several websites related to speedstep-smi on thinkpad T20s however, I still got ENODEV. Other sites claim speedstep-smi "just works" on T20s as long as relaxed_check=1 is set, so it may all be tied into CONFIG_CPU_FREQ_DEBUG. -- speedstep won't load on ThinkPad T20 and s30 (mobile coppermine Pentium 3) https://launchpad.net/malone/bugs/36345 From ivoks at ubuntu.com Thu Apr 13 15:00:05 2006 From: ivoks at ubuntu.com (=?utf-8?q?Ante_Karamati=C4=87?=) Date: Thu, 13 Apr 2006 15:00:05 -0000 Subject: [Bug 5820] Re: Ubuntu Dapper does not recognise Realtek 8201CL Ethernet Controller at Install References: <20051215184929.24631.84035.malonedeb@gangotri.ubuntu.com> Message-ID: <20060413150005.13139.96099.malone@gandwana.ubuntu.com> Could you try with newer daily install CD? ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Unconfirmed => Needs Info -- Ubuntu Dapper does not recognise Realtek 8201CL Ethernet Controller at Install https://launchpad.net/malone/bugs/5820 From karvinen+launchpad at iki.fi Thu Apr 13 15:24:34 2006 From: karvinen+launchpad at iki.fi (Tero Karvinen) Date: Thu, 13 Apr 2006 15:24:34 -0000 Subject: [Bug 38856] Re: [dapper] Soft lockup related to yenta IRQ handler References: <20060409112318.32233.90923.malonedeb@gandwana.ubuntu.com> Message-ID: <20060413152434.13139.46357.malone@gandwana.ubuntu.com> To sum up, I am using "noapic irqpoll" as my default boot options. Works: CDROM, network, battery meter, cpu scaling. Broken: sound, suspend-to-RAM, external display. I have not tried "dist-upgrade" with the installation I am using now, because that's what broke it last time. I have testing notes on different parameters, to sum them up: Ubuntu Dapper Flight 6 i386 Install CDROM Compared to default parameter used in isolinux.cfg: - Without any parameters: complete freeze on "Uncompressing Linux... Ok, booting the kernel. " - With "noapic", boots past "booting the kernel", but does not find CDROM or network (my notes below. I will only attach photos if they are needed) - With "noapic irqpoll" boots and finds peripherals - "nolapic" - complete freeze - I was using pci=noapci before, but don't know if it had any effect 0819 Booted from cd, boot menu: - "F6 Other Options": added "noapic" Computer booted past the "booting the kernel. " Some text was briefly displayed (PICTURE 0821), written by hand: "PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.0", similar for 8, 9. "vt: argh, driver_data is NULL !" "Trying to enable the frame buffer..." "INFO: kbd-mode: setting console mode to unicode" "[!] Choose language" was displayed. - English "[!] Choose language" "Choose your location:" - other: Finland Jumped to Finland by pressing "F" a couple of times "[!] Select a keyboard layout" (Default is American English, bug already filed) - "Select from full keyboard list", "Finnish" (press F to jump to Finnish) 0826 "[!!] Detect and mount CDROM" "No common CD-ROM drive was detected. " (PICTURE 0827) This is related to boot paramaters as described in http://www.iki.fi/karvinen/acer_travelmate_3004wtmi_with_linux_notes.html Alt-ctrl-F4 (PICTURE 0828) Rebooting with alt-ctrl-del... 0829 boot from "Flight 6 i386 installer" F6, "nolapic", enter Freeze on "booting the kernel. " Shut down with 5 s press on power button. Would you like me to try the current installation also with "noapic nolapic pci=noacpi irqpoll"? As it has "noapic irqpoll" in it, it will probably work. Do you want some logs about it? -- [dapper] Soft lockup related to yenta IRQ handler https://launchpad.net/malone/bugs/38856 From ben.collins at ubuntu.com Thu Apr 13 15:34:23 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Thu, 13 Apr 2006 15:34:23 -0000 Subject: [Bug 38856] Re: [Bug 38856] Re: [dapper] Soft lockup related to yenta IRQ handler References: <20060409112318.32233.90923.malonedeb@gandwana.ubuntu.com> <20060413152434.13139.46357.malone@gandwana.ubuntu.com> Message-ID: <1144942463.4755.160.camel@grayson> On Thu, 2006-04-13 at 15:24 +0000, Tero Karvinen wrote: > To sum up, I am using "noapic irqpoll" as my default boot options. Works: CDROM, network, battery meter, cpu scaling. Broken: sound, suspend-to-RAM, external display. Ok, instead try booting with just pci=noacpi. This bug is starting to sound like a buggy BIOS. -- [dapper] Soft lockup related to yenta IRQ handler https://launchpad.net/malone/bugs/38856 From devvv at devvv.de Thu Apr 13 15:41:27 2006 From: devvv at devvv.de (devvv) Date: Thu, 13 Apr 2006 15:41:27 -0000 Subject: [Bug 31983] Re: Kernel security update renders system unbootable References: <20060219133514.1427.22950.malonedeb@gangotri.ubuntu.com> Message-ID: <20060413154127.13165.39441.malone@gandwana.ubuntu.com> This has happened again now. I tried to deinstall the kernels which were not working. The result is that my whole Ubuntu is f***ed up because I can't boot anymore. All kernels fail (I don't know why, it scrolls down too fast) and the busybox doesn't work correctly, too (because libc.so.6 is in /lib64 and not in /lib, can fix that with LD_LIBRARY_PATH, but that doesn't help me though), with grub and lilo. I don't want to reinstall my Ubuntu because I'm pretty sure that when I do the security update, the kernels will be destroyed again. Please tell me what to do so that this bug is not "unconfirmed"! It is well confirmed! -- Kernel security update renders system unbootable https://launchpad.net/malone/bugs/31983 From skauchali at gmail.com Thu Apr 13 16:23:53 2006 From: skauchali at gmail.com (shuttleworthwannabe) Date: Thu, 13 Apr 2006 16:23:53 -0000 Subject: [Bug 39138] Re: PCI resource errors and unable to reboot system References: <20060411132552.24486.98960.malonedeb@gangotri.ubuntu.com> Message-ID: <20060413162353.13165.87887.malone@gandwana.ubuntu.com> Hi Ben, Sorry how do I attach this to the comment? There is not facility to do this..like dialogue to "attach file" or attachment? -- PCI resource errors and unable to reboot system https://launchpad.net/malone/bugs/39138 From skauchali at gmail.com Thu Apr 13 16:21:17 2006 From: skauchali at gmail.com (shuttleworthwannabe) Date: Thu, 13 Apr 2006 16:21:17 -0000 Subject: [Bug 39138] Re: PCI resource errors and unable to reboot system References: <20060411132552.24486.98960.malonedeb@gangotri.ubuntu.com> Message-ID: <20060413162118.13165.30060.malone@gandwana.ubuntu.com> Hi Ben, Sorry how do I attach this to the comment? There is not facility to do this..like dialogue to "attach file" or attachment? -- PCI resource errors and unable to reboot system https://launchpad.net/malone/bugs/39138 From skauchali at gmail.com Thu Apr 13 16:23:10 2006 From: skauchali at gmail.com (shuttleworthwannabe) Date: Thu, 13 Apr 2006 16:23:10 -0000 Subject: [Bug 39138] Re: [Bug 39138] Re: PCI resource errors and unable to reboot system References: <20060411132552.24486.98960.malonedeb@gangotri.ubuntu.com> <20060413143147.13165.52448.malone@gandwana.ubuntu.com> Message-ID: <201a2bbe0604130923v701149c0se239665d58a2dc57@mail.gmail.com> I guess I will have to send this via my email then. Thanks for reviewing my report. the dmeg is attached. Shuaib On 4/13/06, Ben Collins wrote: > > Please attach (do no paste in comment) the entire output of dmesg. > > ** Changed in: linux-source-2.6.15 (Ubuntu) > Status: Unconfirmed => Needs Info > -- > PCI resource errors and unable to reboot system > https://launchpad.net/malone/bugs/39138 > -- PCI resource errors and unable to reboot system https://launchpad.net/malone/bugs/39138 From burner at suppressingfire.org Thu Apr 13 16:09:49 2006 From: burner at suppressingfire.org (Michael R. Head) Date: Thu, 13 Apr 2006 16:09:49 -0000 Subject: [Bug 39338] Re: [dapper] Tons of kernel error messages bring laptop to crawl: hermes @ f09fa000: Error -16 issuing command 0x010b. References: <20060412194713.31677.38583.malonedeb@gandwana.ubuntu.com> Message-ID: <20060413160949.13165.16617.malone@gandwana.ubuntu.com> Yes, I've been using -20 for some time now. -- [dapper] Tons of kernel error messages bring laptop to crawl: hermes @ f09fa000: Error -16 issuing command 0x010b. https://launchpad.net/malone/bugs/39338 From hn093 at netscape.net Thu Apr 13 17:58:54 2006 From: hn093 at netscape.net (hn093) Date: Thu, 13 Apr 2006 17:58:54 -0000 Subject: [Bug 36998] Flight 5 Kernel Won't Boot on an IBM Thinkpad R30 References: <20060328130330.20514.53400.malonedeb@gangotri.ubuntu.com> Message-ID: <20060413175854.3651.19706.launchpad@canonical@gangotri.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: Trying to install Dapper Flight 5 on a Thinkpad R30 fails with "hdc: lost interrupt" error. There's also messages about irq 15, no-one caring and appending "irqpoll" to the bootloader. Appending "irqpoll" gets the installation past this stage, with the side-effect of the CD drive no longer being recognised, making installation from CD impossible. Passing "acpi=off" at boot has the same results. Note this bug also affects other distros with recent kernels, like Fedora Core 5 and SLAX 5.08, but does not affect older distros like Ubuntu Hoary, SuSE 9.1 and Linspire 4.5. I can't say whether or not it works on Breezy, as I haven't attempted to install it on this machine. Note: the original reporter indicated the bug was in package 'kernel-image'; however, that package was not published in Ubuntu. Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: Trying to install Dapper Flight 5 on a Thinkpad R30 fails with "hdc: lost interrupt" error. There's also messages about irq 15, no-one caring and appending "irqpoll" to the bootloader. Appending "irqpoll" gets the installation past this stage, with the side-effect of the CD drive no longer being recognised, making installation from CD impossible. Passing "acpi=off" at boot has the same results. Note this bug also affects other distros with recent kernels, like Fedora Core 5 and SLAX 5.08, but does not affect older distros like Ubuntu Hoary, SuSE 9.1 and Linspire 4.5. I can't say whether or not it works on Breezy, as I haven't attempted to install it on this machine. Note: the original reporter indicated the bug was in package 'kernel-image'; however, that package was not published in Ubuntu. -- Flight 5 Kernel Won't Boot on an IBM Thinkpad R30 https://launchpad.net/malone/bugs/36998 From draimus at gmail.com Thu Apr 13 17:58:54 2006 From: draimus at gmail.com (draimus) Date: Thu, 13 Apr 2006 17:58:54 -0000 Subject: [Bug 36998] Re: Flight 5 Kernel Won't Boot on an IBM Thinkpad R30 References: <20060328130330.20514.53400.malonedeb@gangotri.ubuntu.com> Message-ID: <20060413175854.3651.43926.launchpad@gangotri.ubuntu.com> ** Changed in: linux-image-2.6.15-18-386 (Ubuntu) Sourcepackagename: None => linux-source-2.6.15 Binarypackagename: linux-image-2.6.15-18-386 => None -- Flight 5 Kernel Won't Boot on an IBM Thinkpad R30 https://launchpad.net/malone/bugs/36998 From will at whizzy.org Thu Apr 13 17:58:08 2006 From: will at whizzy.org (WillCooke) Date: Thu, 13 Apr 2006 17:58:08 -0000 Subject: [Bug 5820] Re: [Bug 5820] Re: Ubuntu Dapper does not recognise Realtek 8201CL Ethernet Controller at Install References: <20051215184929.24631.84035.malonedeb@gangotri.ubuntu.com> <20060413150005.13139.96099.malone@gandwana.ubuntu.com> Message-ID: I'm in the middle of moving house at the moment, I'll give it another go in a couple of weeks. On 13/04/06, Ante Karamatić wrote: > > Could you try with newer daily install CD? > > ** Changed in: linux-source-2.6.15 (Ubuntu) > Status: Unconfirmed => Needs Info > -- > Ubuntu Dapper does not recognise Realtek 8201CL Ethernet Controller at > Install > https://launchpad.net/malone/bugs/5820 > -- Ubuntu Dapper does not recognise Realtek 8201CL Ethernet Controller at Install https://launchpad.net/malone/bugs/5820 From acornejo at ieee.org Thu Apr 13 18:29:36 2006 From: acornejo at ieee.org (Alejandro Cornejo) Date: Thu, 13 Apr 2006 18:29:36 -0000 Subject: [Bug 38688] Re: unable to boot References: <20060408070420.32313.56814.malonedeb@gandwana.ubuntu.com> Message-ID: <20060413182936.3651.16012.malone@gangotri.ubuntu.com> Ok, here it is: http://www.mcc.unam.mx/~acornejoc/public/temp/DSCN1447.JPG http://www.mcc.unam.mx/~acornejoc/public/temp/DSCN1450.JPG If you could tell me how to get the vfat module to load (it does not appear on /lib/modules/version/kernel/fs ) I will be able to mount my usbstick and stop taking pictures (which is really a slow process because I have to preprocess them in gimp to make them viewable/usable) -- unable to boot https://launchpad.net/malone/bugs/38688 From penguin.in.black at free.fr Thu Apr 13 18:50:10 2006 From: penguin.in.black at free.fr (Penpen) Date: Thu, 13 Apr 2006 18:50:10 -0000 Subject: [Bug 36158] Re: System does not shutdown References: <20060323145229.5380.85426.malonedeb@gangotri.ubuntu.com> Message-ID: <20060413185010.16443.16073.malone@gandwana.ubuntu.com> I experience the same problem on my desktop computer. I tried noacpi then noacpi noapic too, the same behavior than capacman occured. -- System does not shutdown https://launchpad.net/malone/bugs/36158 From tibi at dds.nl Thu Apr 13 19:35:39 2006 From: tibi at dds.nl (tibi) Date: Thu, 13 Apr 2006 19:35:39 -0000 Subject: [Bug 18418] Re: [Bug 18418] Re: orinoco wifi pcmcia hangs live cd References: <20060113135620.21012.19854.launchpad@macquarie.warthogs.hbd.com> <20060413001108.31677.56880.malone@gandwana.ubuntu.com> Message-ID: <443EA80B.9070501@dds.nl> that is ok. it is a long time ago. i now have new ubuntu cd's. when i rediscover the bug i will make a nuw bug report. tibi Carthik Sharma wrote: >Thank you for reporting this bug and following up on it. > >I am marking this bug Closed since there has been no response from you for over three months. We >would like to fix all existing issues, but need need feedback to help with debugging. > >Should you still have a problem with the latest up to date Dapper kernel and packages, please reopen this bug. In this case, please answer the questions that have already been asked of you before and provide the log files and information required for debugging. > >** Changed in: linux-source-2.6.15 (Ubuntu) > Status: Needs Info => Rejected > > -- orinoco wifi pcmcia hangs live cd https://launchpad.net/malone/bugs/18418 From hramrach at centrum.cz Thu Apr 13 20:33:48 2006 From: hramrach at centrum.cz (Michal Suchanek) Date: Thu, 13 Apr 2006 20:33:48 -0000 Subject: [Bug 38859] Re: The boot CD does not work on Cyrix References: <20060409115532.32233.49614.malonedeb@gandwana.ubuntu.com> Message-ID: <20060413203348.1627.57746.malone@gangotri.ubuntu.com> Here it is. vendor_id : CyrixInstead cpu family : 6 model : 1 model name : 6x86MX 2x Core/Bus Clock stepping : 4 cpu MHz : 132.634 fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : yes fpu : yes fpu_exception : yes cpuid level : 1 wp : yes flags : fpu de tsc msr cx8 pge cmov mmx cyrix_arr ds_cpl est cid bogomips : 264.60 But the reason that the CD does not boot may be that the cdrom does not support DMA properly. Had to add nodma to Knoppix kernel commandline. -- The boot CD does not work on Cyrix https://launchpad.net/malone/bugs/38859 From bluekuja at gmail.com Thu Apr 13 20:50:00 2006 From: bluekuja at gmail.com (Bluekuja) Date: Thu, 13 Apr 2006 20:50:00 -0000 Subject: [Bug 38702] Re: sound does not work References: <20060408091302.32233.60251.malonedeb@gandwana.ubuntu.com> Message-ID: <20060413205000.1684.1157.malone@gangotri.ubuntu.com> same problem for me , im still working with the old kernel because in the new one i get some errors in some audio/video devices. -- sound does not work https://launchpad.net/malone/bugs/38702 From bluekuja at gmail.com Thu Apr 13 20:51:56 2006 From: bluekuja at gmail.com (Bluekuja) Date: Thu, 13 Apr 2006 20:51:56 -0000 Subject: [Bug 38702] Re: sound does not work References: <20060408091302.32233.60251.malonedeb@gandwana.ubuntu.com> Message-ID: <20060413205156.16443.38724.malone@gandwana.ubuntu.com> i forgot to write that audio kernel modules are loaded without problems like the old kernel version but nothing seems to work from audio side. -- sound does not work https://launchpad.net/malone/bugs/38702 From hramrach at centrum.cz Thu Apr 13 20:56:54 2006 From: hramrach at centrum.cz (Michal Suchanek) Date: Thu, 13 Apr 2006 20:56:54 -0000 Subject: [Bug 38859] Boot CD does not work on CD drives with broken DMA References: <20060409115532.32233.49614.malonedeb@gandwana.ubuntu.com> Message-ID: <20060413205654.1684.98599.malone@gangotri.ubuntu.com> Turning off dma on the cdrom really helped. So it is probably not the cpu. -- The boot CD does not work on Cyrix https://launchpad.net/malone/bugs/38859 From bluekuja at gmail.com Thu Apr 13 20:56:12 2006 From: bluekuja at gmail.com (Bluekuja) Date: Thu, 13 Apr 2006 20:56:12 -0000 Subject: [Bug 32274] Re: No sound in dapper, works with breezy References: <20060221094256.795.64768.malonedeb@gandwana.ubuntu.com> Message-ID: <20060413205612.1684.68274.malone@gangotri.ubuntu.com> similar bug https://launchpad.net/distros/ubuntu/+source/linux-source-2.6.15/+bug/38702 -- No sound in dapper, works with breezy https://launchpad.net/malone/bugs/32274 From crimsun at fungus.sh.nu Thu Apr 13 21:02:31 2006 From: crimsun at fungus.sh.nu (Daniel T. Chen) Date: Thu, 13 Apr 2006 21:02:31 -0000 Subject: [Bug 39185] Re: M-Audio Delta 1010LT SPDIF output does not work. References: <20060411193018.32313.43105.malonedeb@gandwana.ubuntu.com> Message-ID: <20060413210232.1627.29310.malone@gangotri.ubuntu.com> Working on backport. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Confirmed => In Progress -- M-Audio Delta 1010LT SPDIF output does not work. https://launchpad.net/malone/bugs/39185 From tommy.trussell at gmail.com Thu Apr 13 21:11:52 2006 From: tommy.trussell at gmail.com (Tommy Trussell) Date: Thu, 13 Apr 2006 21:11:52 -0000 Subject: [Bug 39499] System doesn't power down under Dapper 686 References: <20060413211152.16443.87018.malonedeb@gandwana.ubuntu.com> Message-ID: <20060413211152.16443.87018.malonedeb@gandwana.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 linux-image-2.6.15-20-686 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: I have an eMonster 550r system that I have used with Warty, Breezy and now Dapper. Under the Dapper 686 kernel(s) when I shut down the system, it goes through the normal shutdown sequence, and the hard drive spins down, but the CPU continues running until I press the power button. Under the 386 kernel the system beeps several times and the power goes off. [BTW in Dapper I also discovered that pressing the power button in a running system does not start a shutdown sequence, but just kills the power. This is true for both the 386 and 686 kernels. The power button started a shutdown sequence in Breezy.] Here's what /proc/cpuinfo says: processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 7 model name : Pentium III (Katmai) stepping : 3 cpu MHz : 551.474 cache size : 512 KB fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 2 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 mmx fxsr sse bogomips : 1103.71 Forgive my cluelessness but someone may have to lead me through any additional identifying information needed. -- System doesn't power down under Dapper 686 https://launchpad.net/malone/bugs/39499 From xavier.verne at free.fr Thu Apr 13 21:47:18 2006 From: xavier.verne at free.fr (Xavier Verne) Date: Thu, 13 Apr 2006 21:47:18 -0000 Subject: [Bug 39343] Re: ndiswrapper not working for intel 3945G in Dapper flight 6 References: <20060412204053.15436.55221.malonedeb@gangotri.ubuntu.com> Message-ID: <20060413214718.16492.54121.malone@gandwana.ubuntu.com> Yes I know about having a native driver, bug reported is 35215. Maybe reporting a bug upstream and closing this one ? -- ndiswrapper not working for intel 3945G in Dapper flight 6 https://launchpad.net/malone/bugs/39343 From acornejo at ieee.org Thu Apr 13 22:03:13 2006 From: acornejo at ieee.org (Alejandro Cornejo) Date: Thu, 13 Apr 2006 22:03:13 -0000 Subject: [Bug 38688] Re: unable to boot References: <20060408070420.32313.56814.malonedeb@gandwana.ubuntu.com> Message-ID: <20060413220313.16492.96057.malone@gandwana.ubuntu.com> Ok, so after some hacking (there should be a manual somewhere that shows how to modify ubuntu's initrd, which was tricky) i managed to use my thumb drive at the prompt. I uploaded two files: http://www.mcc.unam.mx/~acornejoc/public/temp/ioports-new which is the 15-20 kernel version of /proc/ioports and http://www.mcc.unam.mx/~acornejoc/public/temp/ioports-old which is the 15-19 kernel version of /proc/ioports There are few differences, the only thing word mentioning seems to be pnp. It seems that libata is loaded inside pnp address space in the new version, so maybe that has something to do with this. I will attempt to do a isapnp=0, i think i read somewhere that deactivates pnp. Waiting for further instructions... -- unable to boot https://launchpad.net/malone/bugs/38688 From mail at carthik.net Thu Apr 13 22:11:53 2006 From: mail at carthik.net (Carthik Sharma) Date: Thu, 13 Apr 2006 22:11:53 -0000 Subject: [Bug 20731] Re: Usplash doesn't work on Dell Inspiron 6000 References: <20060113140855.21012.76083.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060413221154.16492.55168.malone@gandwana.ubuntu.com> Thank you for reporting this bug and following up on it. I am marking this bug Closed since there has been no response from you for over three months. We would like to fix all existing issues, but need need feedback to help with debugging. Should you still have a problem with the latest up to date Dapper kernel and packages, please reopen this bug, answering the questions that have already been asked of you before. Thanks again, please report any other issues you have after checking that they haven't already been reported. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Needs Info => Rejected -- Usplash doesn't work on Dell Inspiron 6000 https://launchpad.net/malone/bugs/20731 From rob at robhughes.com Thu Apr 13 22:16:54 2006 From: rob at robhughes.com (Rob Hughes) Date: Thu, 13 Apr 2006 22:16:54 -0000 Subject: [Bug 39509] Extended keys not working on Logitech MX 700 keyboard References: <20060413221654.16443.1168.malonedeb@gandwana.ubuntu.com> Message-ID: <20060413221654.16443.1168.malonedeb@gandwana.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 linux-image-2.6.15-20-k7 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: The standard keys work. But the extended (multimedia) keys don't produce any keycodes in either xev or events in evtest when run against the correct /dev/input/event device. This all worked fine in hoary. And since even evtest doesn't produce codes, I'm guessing that this is a kernel issue, not usb or xorg. -- Extended keys not working on Logitech MX 700 keyboard https://launchpad.net/malone/bugs/39509 From linux2k at gmail.com Thu Apr 13 22:20:03 2006 From: linux2k at gmail.com (Konrad L) Date: Thu, 13 Apr 2006 22:20:03 -0000 Subject: [Bug 22555] Re: [Bug 22555] Re: with ehci-hcd, kernel needs 3 minutes to detect USB stick References: <20060113141857.21012.27150.launchpad@macquarie.warthogs.hbd.com> <20060412233919.31677.14533.malone@gandwana.ubuntu.com> Message-ID: We can talk about this issue (if you would like) at the LUGatUCF meeting. The problem seems to be related to the SanDisk flash drive (I tried PNY flash memory and it works flawlessly) with 2.6.12-10 kernel. I haven't upgraded to the Dapper kernel just yet. Regards, Konrad On 4/12/06, Carthik Sharma wrote: > > Thank you for reporting this bug and following up on it. > > I am marking this bug Closed since there has been no response from you for > over three months. We > would like to fix all existing issues, but need need feedback to help with > debugging. > > Should you still have a problem with the latest up to date Dapper kernel > and packages, please reopen this bug. In this case, please answer the > questions that have already been asked of you before and provide the log > files and information required for debugging. > > ** Changed in: linux-source-2.6.15 (Ubuntu) > Status: Needs Info => Rejected > -- > with ehci-hcd, kernel needs 3 minutes to detect USB stick > https://launchpad.net/malone/bugs/22555 > -- with ehci-hcd, kernel needs 3 minutes to detect USB stick https://launchpad.net/malone/bugs/22555 From dennis at kaarsemaker.net Thu Apr 13 22:29:15 2006 From: dennis at kaarsemaker.net (Dennis Kaarsemaker) Date: Thu, 13 Apr 2006 22:29:15 -0000 Subject: [Bug 26376] Re: [Bug 26376] Re: [Bug 26376] Re: SiS 7012 chip Breezy: Sound works fine but volume can only be set to mute or 100% References: <20060113144913.21012.21453.launchpad@macquarie.warthogs.hbd.com> <20060411035113.24516.36261.malone@gangotri.ubuntu.com> Message-ID: <1144967355.9080.78.camel@mirage> > Can you tell me where can I download a dapper live cd? http://cdimage.ubuntu.com -- SiS 7012 chip Breezy: Sound works fine but volume can only be set to mute or 100% https://launchpad.net/malone/bugs/26376 From hn093 at netscape.net Thu Apr 13 23:01:12 2006 From: hn093 at netscape.net (hn093) Date: Thu, 13 Apr 2006 23:01:12 -0000 Subject: [Bug 36998] Re: Flight 5 Kernel Won't Boot on an IBM Thinkpad R30 References: <20060328130330.20514.53400.malonedeb@gangotri.ubuntu.com> Message-ID: <20060413230112.16492.59497.launchpad@gandwana.ubuntu.com> ** Changed in: Ubuntu Severity: Normal => Critical ** Changed in: linux-source-2.6.15 (Ubuntu) Severity: Normal => Critical -- Flight 5 Kernel Won't Boot on an IBM Thinkpad R30 https://launchpad.net/malone/bugs/36998 From achalil at gmail.com Thu Apr 13 23:20:18 2006 From: achalil at gmail.com (capacman) Date: Thu, 13 Apr 2006 23:20:18 -0000 Subject: [Bug 36158] Re: System does not shutdown References: <20060323145229.5380.85426.malonedeb@gangotri.ubuntu.com> Message-ID: <20060413232018.16443.60242.malone@gandwana.ubuntu.com> As corsaire01 said i also think that this is a kernel flaw that triggers subtily at kernel releases. Because my computer power-off when i had been using ubuntu 5.10. If i do not remember wrong it also power-off properly with kubuntu 6.04 flight 4 cd. However it is still working when i boot with recovery mode. Is there any other module related to acpi or apm that is loaded when we boot normaly rather than init 1? -- System does not shutdown https://launchpad.net/malone/bugs/36158 From achalil at gmail.com Thu Apr 13 23:22:54 2006 From: achalil at gmail.com (capacman) Date: Thu, 13 Apr 2006 23:22:54 -0000 Subject: [Bug 36158] Re: System does not shutdown References: <20060323145229.5380.85426.malonedeb@gangotri.ubuntu.com> Message-ID: <20060413232254.1684.5463.malone@gangotri.ubuntu.com> I think this bug report is also duplicate of this https://launchpad.net/distros/ubuntu/+source/linux-source-2.6.15/+bug/39499 -- System does not shutdown https://launchpad.net/malone/bugs/36158 From acornejo at ieee.org Thu Apr 13 23:26:02 2006 From: acornejo at ieee.org (Alejandro Cornejo) Date: Thu, 13 Apr 2006 23:26:02 -0000 Subject: [Bug 38688] Re: unable to boot References: <20060408070420.32313.56814.malonedeb@gandwana.ubuntu.com> Message-ID: <20060413232602.1627.85578.malone@gangotri.ubuntu.com> I dont know if anyone is still reading this, but I'll keep on writing anyhow. I made a small C program that uses klogctl to dump the kernel messages to a file in my thumb drive. I tried to do a naive cp /proc/kmsg to the thumb drive, but that did not work. I've uploaded this file to: http://www.mcc.unam.mx/~acornejoc/public/temp/kmsg So now all the bug related files are simple text files, no need to go through the images. -- unable to boot https://launchpad.net/malone/bugs/38688 From crimsun at fungus.sh.nu Fri Apr 14 00:23:28 2006 From: crimsun at fungus.sh.nu (Daniel T. Chen) Date: Fri, 14 Apr 2006 00:23:28 -0000 Subject: [Bug 39185] Re: M-Audio Delta 1010LT SPDIF output does not work. References: <20060411193018.32313.43105.malonedeb@gandwana.ubuntu.com> Message-ID: <20060414002328.1684.80680.malone@gangotri.ubuntu.com> https://lists.ubuntu.com/archives/kernel-team/2006-April/000832.html ** Changed in: linux-source-2.6.15 (Ubuntu) Status: In Progress => Fix Committed -- M-Audio Delta 1010LT SPDIF output does not work. https://launchpad.net/malone/bugs/39185 From web250 at optonline.net Fri Apr 14 00:52:06 2006 From: web250 at optonline.net (Jason Westerkon) Date: Fri, 14 Apr 2006 00:52:06 -0000 Subject: [Bug 35215] Re: ipw3945 driver required for functionality on new Intel PRO/Wireless 3945ABG Mini-PCI Express Adapters References: <20060316173707.11105.89035.malonedeb@gandwana.ubuntu.com> Message-ID: <20060414005206.1627.47664.malone@gangotri.ubuntu.com> Ben, by "next kernel release", does that mean 2.6.16 (ie, not in dapper) or a subversion of 2.6.15? Basically, bottom line, will this make Dapper 6.06? All the new Dell's, as well as im sure many other manufacturers will be using the new 3945, so it's addition would be critical. If not in the initial Dapper release, will we see a kernel patch, or a backport of some sort? -- ipw3945 driver required for functionality on new Intel PRO/Wireless 3945ABG Mini-PCI Express Adapters https://launchpad.net/malone/bugs/35215 From jmsunseri at gmail.com Fri Apr 14 01:00:35 2006 From: jmsunseri at gmail.com (Justin Sunseri) Date: Fri, 14 Apr 2006 01:00:35 -0000 Subject: [Bug 38702] Re: sound does not work References: <20060408091302.32233.60251.malonedeb@gandwana.ubuntu.com> Message-ID: <20060414010035.1627.13388.malone@gangotri.ubuntu.com> i just submitted this bug which i think i should have grouped with this bug https://launchpad.net/distros/ubuntu/+bug/39517 -- sound does not work https://launchpad.net/malone/bugs/38702 From ashley.maher at didymodesigns.com.au Fri Apr 14 01:14:24 2006 From: ashley.maher at didymodesigns.com.au (Ashley Maher) Date: Fri, 14 Apr 2006 01:14:24 -0000 Subject: [Bug 23605] Re: gdm dies during boot References: <20060113142439.21012.70753.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060414011424.1684.12812.malone@gangotri.ubuntu.com> Carthik, Sorry I missed the emails to me. Yep the bug ended up being a hardware bug. The computer shop took days to find it. Sorry to muck you about. Regards, Ashley PS Yes I'll be upgrading to Dapper soon -- gdm dies during boot https://launchpad.net/malone/bugs/23605 From vR at movingparts.net Fri Apr 14 01:39:59 2006 From: vR at movingparts.net (Jason 'vanRijn' Kasper) Date: Fri, 14 Apr 2006 01:39:59 -0000 Subject: [Bug 39518] kernel oops in usbserial on ppc with appletouch loaded (palm hotsync attempt) References: <20060414013959.1684.83034.malonedeb@gangotri.ubuntu.com> Message-ID: <20060414013959.1684.83034.malonedeb@gangotri.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 linux-image-2.6.15-20-powerpc (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: It does not happen the first time I hotSync my Treo 650, but somewhere in subsequent pilot hotsync attempts, I am getting a kernel oops with the below kernel trace. This operation is not normally prone to error like this, so I suspect either the appletouch driver or some oddity regarding running on a PPC machine. Also, I believe that something might be going wrong in the suspend/resume cycle that is putting the kernel into a funky state, since I am able to hotSync reliably after a clean boot. [ 6058.278540] Unable to handle kernel paging request for data at address 0x00000084 [ 6058.278561] Faulting instruction address: 0xf27578bc [ 6058.278573] Oops: Kernel access of bad area, sig: 11 [#3] [ 6058.278578] Modules linked in: appletouch visor usbserial radeon drm hci_usb rfcomm l2cap bluetooth cpufreq_powersave cpufreq_stats cpufreq_userspace cp ufreq_ondemand cpufreq_conservative ipv6 af_packet arc4 ieee80211_crypt_wep ext3 jbd dm_mod md_mod sr_mod snd_powermac snd_pcm_oss snd_mixer_oss snd_pcm sn d_timer snd soundcore snd_page_alloc sbp2 scsi_mod apm_emu joydev ohci1394 pcmcia ieee1394 bcm43xx ieee80211softmac ieee80211 ieee80211_crypt sungem sungem _phy usbhid yenta_socket rsrc_nonstatic pcmcia_core uninorth_agp agpgart tsdev evdev reiserfs ehci_hcd ohci_hcd usbcore ide_disk ide_cd cdrom i2c_keywest c apability commoncap [ 6058.278652] NIP: F27578BC LR: C01768E0 CTR: F2757870 [ 6058.278660] REGS: e74a1d20 TRAP: 0300 Not tainted (2.6.15-20-powerpc) [ 6058.278666] MSR: 00009032 CR: 80004442 XER: 00000000 [ 6058.278680] DAR: 00000084, DSISR: 40000000 [ 6058.278686] TASK = e983b350[8163] 'pilot-xfer' THREAD: e74a0000 [ 6058.278692] GPR00: 00000000 E74A1DD0 E983B350 F275C0D8 F275C018 F275BC70 7FCC2760 402C7413 [ 6058.278707] GPR08: 402C7413 EB1B0600 FFFFFFE7 EB1B0600 20004448 1001E29C 00000000 00000000 [ 6058.278723] GPR16: 00000000 00000000 10010000 10010000 20000000 00000004 7FCC36C4 7FCC386B [ 6058.278737] GPR24: 00000000 1001660C EBA6C000 F2760000 7FCC2760 E9931F00 402C7413 00000000 [ 6058.278753] NIP [F27578BC] serial_ioctl+0x4c/0x110 [usbserial] [ 6058.278778] LR [C01768E0] tty_ioctl+0x3c0/0xf50 [ 6058.278797] Call Trace: [ 6058.278802] [E74A1DD0] [E9BD9B20] 0xe9bd9b20 (unreliable) [ 6058.278813] [E74A1DF0] [C01768E0] tty_ioctl+0x3c0/0xf50 [ 6058.278824] [E74A1ED0] [C0097D14] do_ioctl+0x84/0x90 [ 6058.278834] [E74A1EE0] [C0097DAC] vfs_ioctl+0x8c/0x4b0 [ 6058.278844] [E74A1F10] [C0098264] sys_ioctl+0x94/0xb0 [ 6058.278853] [E74A1F40] [C00115DC] ret_from_syscall+0x0/0x4c [ 6058.278865] --- Exception: c01 at 0xfe5459c [ 6058.278875] LR = 0xfed8518 [ 6058.278880] Instruction dump: [ 6058.278916] 3ca0f276 3c80f276 7fc7f378 38a5bc70 7cdc3378 3884c018 801bfb84 83e3096c [ 6058.278931] 3c60f276 3863c0d8 2f800000 409e00a8 <801f0084> 3940ffed 2f800000 409e0048 [ 6058.278947] -- kernel oops in usbserial on ppc with appletouch loaded (palm hotsync attempt) https://launchpad.net/malone/bugs/39518 From caravena at gmail.com Fri Apr 14 02:57:12 2006 From: caravena at gmail.com (Cristian Aravena Romero) Date: Fri, 14 Apr 2006 02:57:12 -0000 Subject: [Bug 32329] Re: Not config "NIC: Broadcom BCM4318 - Wireless" References: <20060221171518.23543.29315.malonedeb@gandwana.ubuntu.com> Message-ID: <20060414025712.1684.2276.malone@gangotri.ubuntu.com> Now work with firmware in package .deb See: https://wiki.ubuntu.com/WifiDocs/Driver/bcm43xx Thanks, Cristian Aravena Romero -- Not config "NIC: Broadcom BCM4318 - Wireless" https://launchpad.net/malone/bugs/32329 From caravena at gmail.com Fri Apr 14 03:00:46 2006 From: caravena at gmail.com (Cristian Aravena Romero) Date: Fri, 14 Apr 2006 03:00:46 -0000 Subject: [Bug 39509] Re: Extended keys not working on Logitech MX 700 keyboard References: <20060413221654.16443.1168.malonedeb@gandwana.ubuntu.com> Message-ID: <20060414030046.1684.16081.launchpad@gangotri.ubuntu.com> ** Changed in: linux-source-2.6.15 linux-image-2.6.15-20-k7 (Ubuntu) Sourcepackagename: linux-source-2.6.15 => hotkey-setup -- Extended keys not working on Logitech MX 700 keyboard https://launchpad.net/malone/bugs/39509 From tomwolfe at gmail.com Fri Apr 14 03:53:22 2006 From: tomwolfe at gmail.com (Thomas Wolfe) Date: Fri, 14 Apr 2006 03:53:22 -0000 Subject: [Bug 36736] Re: Laptop doesn't wakeup after sleep References: <20060326141302.6279.83357.malonedeb@gandwana.ubuntu.com> Message-ID: <20060414035322.16492.41562.malone@gandwana.ubuntu.com> I also have a T41 (ATI Radeon using the ati driver) with this problem (basically it comes back up, I can move the mouse around and such, but my hard drive thrashes very badly and does not stop, that is what usually happens, sometimes the screen goes blank and I cannot do anything, totally locked up, but the drive is not thrashing) it probably has nothing to do with the filesystem (happens with both reiserfs and ext3) and it happens in both breezy and dapper for me. also, sometimes just totally randomly when I am using the computer the hard drive starts thrashing and I cannot use the system. as this says https://launchpad.net/distros/ubuntu/+source/linux-source-2.6.15/+bug/21609 removing the splash option helps to at least get video back, but my drive thrashes and my system is thus unusable (cannot even start top). in windows 2000 it does work fine and dandy. here is my lspci: 0000:00:00.0 Host bridge: Intel Corporation 82855PM Processor to I/O Controller (rev 03) 0000:00:01.0 PCI bridge: Intel Corporation 82855PM Processor to AGP Controller (rev 03) 0000:00:1d.0 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 01) 0000:00:1d.1 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 01) 0000:00:1d.2 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 (rev 01) 0000:00:1d.7 USB Controller: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller (rev 01) 0000:00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 81) 0000:00:1f.0 ISA bridge: Intel Corporation 82801DBM (ICH4-M) LPC Interface Bridge (rev 01) 0000:00:1f.1 IDE interface: Intel Corporation 82801DBM (ICH4-M) IDE Controller (rev 01) 0000:00:1f.3 SMBus: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller (rev 01) 0000:00:1f.5 Multimedia audio controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 01) 0000:00:1f.6 Modem: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller (rev 01) 0000:01:00.0 VGA compatible controller: ATI Technologies Inc Radeon R250 Lf [FireGL 9000] (rev 02) 0000:02:00.0 CardBus bridge: Texas Instruments PCI4520 PC card Cardbus Controller (rev 01) 0000:02:00.1 CardBus bridge: Texas Instruments PCI4520 PC card Cardbus Controller (rev 01) 0000:02:01.0 Ethernet controller: Intel Corporation 82540EP Gigabit Ethernet Controller (Mobile) (rev 03) 0000:02:02.0 Network controller: Intel Corporation PRO/Wireless LAN 2100 3B Mini PCI Adapter (rev 04) the dmidecode output is hella long, but here goes: # dmidecode 2.7 SMBIOS 2.33 present. 61 structures occupying 2127 bytes. Table at 0x000E0010. Handle 0x0000, DMI type 0, 20 bytes. BIOS Information Vendor: IBM Version: 1RETDOWW (3.20 ) Release Date: 02/27/2006 Address: 0xDC000 Runtime Size: 144 kB ROM Size: 1024 kB Characteristics: PCI is supported PC Card (PCMCIA) is supported PNP is supported APM is supported BIOS is upgradeable BIOS shadowing is allowed ESCD support is available Boot from CD is supported Selectable boot is supported EDD is supported 3.5"/720 KB floppy services are supported (int 13h) Print screen service is supported (int 5h) 8042 keyboard services are supported (int 9h) Serial services are supported (int 14h) Printer services are supported (int 17h) CGA/mono video services are supported (int 10h) ACPI is supported USB legacy is supported AGP is supported BIOS boot specification is supported Handle 0x0001, DMI type 1, 25 bytes. System Information Manufacturer: IBM Product Name: 2379DJU Version: ThinkPad T41 Serial Number: 99D2381 UUID: 88608481-46DB-11CB-ABA8-CDF697ABCA9E Wake-up Type: Power Switch Handle 0x0002, DMI type 2, 8 bytes. Base Board Information Manufacturer: IBM Product Name: 2379DJU Version: Not Available Serial Number: J1UHM3CX1LY Handle 0x0003, DMI type 3, 17 bytes. Chassis Information Manufacturer: IBM Type: Notebook Lock: Not Present Version: Not Available Serial Number: Not Available Asset Tag: No Asset Information Boot-up State: Unknown Power Supply State: Unknown Thermal State: Unknown Security Status: Unknown OEM Information: 0x00000000 Handle 0x0004, DMI type 126, 17 bytes. Inactive Handle 0x0005, DMI type 126, 17 bytes. Inactive Handle 0x0006, DMI type 4, 35 bytes. Processor Information Socket Designation: None Type: Central Processor Family: Pentium M Manufacturer: GenuineIntel ID: 95 06 00 00 BF F9 E9 A7 Signature: Type 0, Family 6, Model 9, Stepping 5 Flags: FPU (Floating-point unit on-chip) VME (Virtual mode extension) DE (Debugging extension) PSE (Page size extension) TSC (Time stamp counter) MSR (Model specific registers) MCE (Machine check exception) CX8 (CMPXCHG8 instruction supported) SEP (Fast system call) MTRR (Memory type range registers) PGE (Page global enable) MCA (Machine check architecture) CMOV (Conditional move instruction supported) PAT (Page attribute table) CLFSH (CLFLUSH instruction supported) DS (Debug store) ACPI (ACPI supported) MMX (MMX technology supported) FXSR (Fast floating-point save and restore) SSE (Streaming SIMD extensions) SSE2 (Streaming SIMD extensions 2) TM (Thermal monitor supported) PBE (Pending break enabled) Version: Intel(R) Pentium(R) M processor Voltage: 1.5 V External Clock: 400 MHz Max Speed: 1600 MHz Current Speed: 1600 MHz Status: Populated, Enabled Upgrade: None L1 Cache Handle: 0x000A L2 Cache Handle: 0x000B L3 Cache Handle: Not Provided Serial Number: Not Specified Asset Tag: Not Specified Part Number: Not Specified Handle 0x0007, DMI type 5, 20 bytes. Memory Controller Information Error Detecting Method: None Error Correcting Capabilities: None Supported Interleave: One-way Interleave Current Interleave: One-way Interleave Maximum Memory Module Size: 1024 MB Maximum Total Memory Size: 2048 MB Supported Speeds: Other Supported Memory Types: DIMM SDRAM Memory Module Voltage: 2.9 V Associated Memory Slots: 2 0x0008 0x0009 Enabled Error Correcting Capabilities: None Handle 0x0008, DMI type 6, 12 bytes. Memory Module Information Socket Designation: DIMM Slot 1 Bank Connections: 0 1 Current Speed: Unknown Type: DIMM SDRAM Installed Size: 256 MB (Double-bank Connection) Enabled Size: 256 MB (Double-bank Connection) Error Status: OK Handle 0x0009, DMI type 6, 12 bytes. Memory Module Information Socket Designation: DIMM Slot 2 Bank Connections: 2 3 Current Speed: Unknown Type: DIMM SDRAM Installed Size: 256 MB (Double-bank Connection) Enabled Size: 256 MB (Double-bank Connection) Error Status: OK Handle 0x000A, DMI type 7, 19 bytes. Cache Information Socket Designation: Internal L1 Cache Configuration: Enabled, Socketed, Level 1 Operational Mode: Write Back Location: Internal Installed Size: 32 KB Maximum Size: 32 KB Supported SRAM Types: Synchronous Installed SRAM Type: Synchronous Speed: Unknown Error Correction Type: Unknown System Type: Other Associativity: 8-way Set-associative Handle 0x000B, DMI type 7, 19 bytes. Cache Information Socket Designation: Internal L2 Cache Configuration: Enabled, Socketed, Level 2 Operational Mode: Write Back Location: Internal Installed Size: 1024 KB Maximum Size: 1024 KB Supported SRAM Types: Burst Installed SRAM Type: Burst Speed: Unknown Error Correction Type: Multi-bit ECC System Type: Unified Associativity: 8-way Set-associative Handle 0x000C, DMI type 126, 9 bytes. Inactive Handle 0x000D, DMI type 8, 9 bytes. Port Connector Information Internal Reference Designator: Not Available Internal Connector Type: None External Reference Designator: Infrared External Connector Type: Infrared Port Type: Other Handle 0x000E, DMI type 8, 9 bytes. Port Connector Information Internal Reference Designator: Not Available Internal Connector Type: None External Reference Designator: Parallel External Connector Type: DB-25 female Port Type: Parallel Port ECP/EPP Handle 0x000F, DMI type 8, 9 bytes. Port Connector Information Internal Reference Designator: Not Available Internal Connector Type: None External Reference Designator: External Monitor External Connector Type: DB-15 female Port Type: Video Port Handle 0x0010, DMI type 126, 9 bytes. Inactive Handle 0x0011, DMI type 126, 9 bytes. Inactive Handle 0x0012, DMI type 126, 9 bytes. Inactive Handle 0x0013, DMI type 126, 9 bytes. Inactive Handle 0x0014, DMI type 126, 9 bytes. Inactive Handle 0x0015, DMI type 8, 9 bytes. Port Connector Information Internal Reference Designator: Not Available Internal Connector Type: None External Reference Designator: Microphone Jack External Connector Type: Mini Jack (headphones) Port Type: Audio Port Handle 0x0016, DMI type 8, 9 bytes. Port Connector Information Internal Reference Designator: Not Available Internal Connector Type: None External Reference Designator: Headphone Jack External Connector Type: Mini Jack (headphones) Port Type: Audio Port Handle 0x0017, DMI type 8, 9 bytes. Port Connector Information Internal Reference Designator: Not Available Internal Connector Type: None External Reference Designator: S-Video-Out External Connector Type: Other Port Type: Video Port Handle 0x0018, DMI type 126, 9 bytes. Inactive Handle 0x0019, DMI type 8, 9 bytes. Port Connector Information Internal Reference Designator: Not Available Internal Connector Type: None External Reference Designator: Modem External Connector Type: RJ-11 Port Type: Modem Port Handle 0x001A, DMI type 8, 9 bytes. Port Connector Information Internal Reference Designator: Not Available Internal Connector Type: None External Reference Designator: Ethernet External Connector Type: RJ-45 Port Type: Network Port Handle 0x001B, DMI type 8, 9 bytes. Port Connector Information Internal Reference Designator: Not Available Internal Connector Type: None External Reference Designator: USB 1 External Connector Type: Access Bus (USB) Port Type: USB Handle 0x001C, DMI type 8, 9 bytes. Port Connector Information Internal Reference Designator: Not Available Internal Connector Type: None External Reference Designator: USB 2 External Connector Type: Access Bus (USB) Port Type: USB Handle 0x001D, DMI type 126, 9 bytes. Inactive Handle 0x001E, DMI type 126, 9 bytes. Inactive Handle 0x001F, DMI type 126, 9 bytes. Inactive Handle 0x0020, DMI type 126, 9 bytes. Inactive Handle 0x0021, DMI type 126, 9 bytes. Inactive Handle 0x0022, DMI type 9, 13 bytes. System Slot Information Designation: CardBus Slot 1 Type: 32-bit PC Card (PCMCIA) Current Usage: Available Length: Other ID: Adapter 0, Socket 0 Characteristics: 5.0 V is provided 3.3 V is provided PC Card-16 is supported Cardbus is supported Zoom Video is supported Modem ring resume is supported PME signal is supported Hot-plug devices are supported Handle 0x0023, DMI type 9, 13 bytes. System Slot Information Designation: CardBus Slot 2 Type: 32-bit PC Card (PCMCIA) Current Usage: Available Length: Other ID: Adapter 1, Socket 0 Characteristics: 5.0 V is provided 3.3 V is provided PC Card-16 is supported Cardbus is supported Zoom Video is supported Modem ring resume is supported PME signal is supported Hot-plug devices are supported Handle 0x0024, DMI type 126, 13 bytes. Inactive Handle 0x0025, DMI type 126, 13 bytes. Inactive Handle 0x0026, DMI type 9, 13 bytes. System Slot Information Designation: Mini-PCI Slot 1 Type: 32-bit PCI Current Usage: Available Length: Other ID: 1 Characteristics: 5.0 V is provided 3.3 V is provided PME signal is supported SMBus signal is supported Handle 0x0027, DMI type 126, 13 bytes. Inactive Handle 0x0028, DMI type 10, 6 bytes. On Board Device Information Type: Other Status: Enabled Description: IBM Embedded Security hardware Handle 0x0029, DMI type 11, 5 bytes. OEM Strings String 1: IBM ThinkPad Embedded Controller -[1RHT71WW-3.04 ]- Handle 0x002A, DMI type 13, 22 bytes. BIOS Language Information Installable Languages: 1 enUS Currently Installed Language: enUS Handle 0x002B, DMI type 15, 25 bytes. System Event Log Area Length: 0 bytes Header Start Offset: 0x0000 Header Length: 16 bytes Data Start Offset: 0x0010 Access Method: General-purpose non-volatile data functions Access Address: 0x0000 Status: Invalid, Not Full Change Token: 0x00000010 Header Format: Type 1 Supported Log Type Descriptors: 1 Descriptor 1: POST error Data Format 1: POST results bitmap Handle 0x002C, DMI type 16, 15 bytes. Physical Memory Array Location: System Board Or Motherboard Use: System Memory Error Correction Type: None Maximum Capacity: 1 GB Error Information Handle: Not Provided Number Of Devices: 2 Handle 0x002D, DMI type 17, 27 bytes. Memory Device Array Handle: 0x002C Error Information Handle: No Error Total Width: 64 bits Data Width: 64 bits Size: 256 MB Form Factor: SODIMM Set: None Locator: DIMM 1 Bank Locator: Bank 0/1 Type: DDR Type Detail: Synchronous Speed: Unknown Manufacturer: Not Specified Serial Number: Not Specified Asset Tag: Not Specified Part Number: Not Specified Handle 0x002E, DMI type 17, 27 bytes. Memory Device Array Handle: 0x002C Error Information Handle: No Error Total Width: 64 bits Data Width: 64 bits Size: 256 MB Form Factor: SODIMM Set: None Locator: DIMM 2 Bank Locator: Bank 2/3 Type: DDR Type Detail: Synchronous Speed: Unknown Manufacturer: Not Specified Serial Number: Not Specified Asset Tag: Not Specified Part Number: Not Specified Handle 0x002F, DMI type 18, 23 bytes. 32-bit Memory Error Information Type: OK Granularity: Unknown Operation: Unknown Vendor Syndrome: Unknown Memory Array Address: Unknown Device Address: Unknown Resolution: Unknown Handle 0x0030, DMI type 19, 15 bytes. Memory Array Mapped Address Starting Address: 0x00000000000 Ending Address: 0x0001FFFFFFF Range Size: 512 MB Physical Array Handle: 0x002C Partition Width: 0 Handle 0x0031, DMI type 20, 19 bytes. Memory Device Mapped Address Starting Address: 0x00000000000 Ending Address: 0x0000FFFFFFF Range Size: 256 MB Physical Device Handle: 0x002D Memory Array Mapped Address Handle: 0x0030 Partition Row Position: 1 Handle 0x0032, DMI type 20, 19 bytes. Memory Device Mapped Address Starting Address: 0x00010000000 Ending Address: 0x0001FFFFFFF Range Size: 256 MB Physical Device Handle: 0x002E Memory Array Mapped Address Handle: 0x0030 Partition Row Position: 1 Handle 0x0033, DMI type 21, 7 bytes. Built-in Pointing Device Type: Track Point Interface: PS/2 Buttons: 3 Handle 0x0034, DMI type 21, 7 bytes. Built-in Pointing Device Type: Touch Pad Interface: PS/2 Buttons: 0 Handle 0x0035, DMI type 24, 5 bytes. Hardware Security Power-On Password Status: Disabled Keyboard Password Status: Disabled Administrator Password Status: Disabled Front Panel Reset Status: Unknown Handle 0x0036, DMI type 32, 11 bytes. System Boot Information Status: No errors detected Handle 0x0037, DMI type 131, 102 bytes. OEM-specific Type Header and Data: 83 66 37 00 01 00 00 00 00 01 72 03 40 00 AE 80 00 02 00 00 00 00 00 2A 00 40 2A 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 16 00 80 16 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Strings: IBMCFGDATA Handle 0x0038, DMI type 131, 17 bytes. OEM-specific Type Header and Data: 83 11 38 00 01 02 03 FF FF 1F 00 00 00 00 00 02 00 Strings: BOOTINF 20h BOOTDEV 21h KEYPTRS 23h Handle 0x0039, DMI type 132, 7 bytes. OEM-specific Type Header and Data: 84 07 39 00 01 D8 36 Handle 0x003A, DMI type 133, 5 bytes. OEM-specific Type Header and Data: 85 05 3A 00 01 Strings: KHOIHGIUCCHHII Handle 0x003B, DMI type 126, 13 bytes. Inactive Handle 0x003C, DMI type 127, 4 bytes. End Of Table -- Laptop doesn't wakeup after sleep https://launchpad.net/malone/bugs/36736 From rob at robhughes.com Fri Apr 14 04:01:51 2006 From: rob at robhughes.com (Rob Hughes) Date: Fri, 14 Apr 2006 04:01:51 -0000 Subject: [Bug 39509] Re: Extended keys not working on Logitech MX 700 keyboard References: <20060413221654.16443.1168.malonedeb@gandwana.ubuntu.com> Message-ID: <20060414040151.1684.63664.malone@gangotri.ubuntu.com> I'm not using hotkeys. And on further investigation, these key codes are coming through the mouse event interface, but not when I'm in X. If I'm in the console, I can see the events through the mouse event interface. And again, hotkeys is in no way involved in this. This is a kernel and/or udev issue. -- Extended keys not working on Logitech MX 700 keyboard https://launchpad.net/malone/bugs/39509 From zulcss at gmail.com Fri Apr 14 04:05:53 2006 From: zulcss at gmail.com (ChuckShort) Date: Fri, 14 Apr 2006 04:05:53 -0000 Subject: [Bug 39499] Re: System doesn't power down under Dapper 686 References: <20060413211152.16443.87018.malonedeb@gandwana.ubuntu.com> Message-ID: <20060414040553.16492.87355.malone@gandwana.ubuntu.com> Try adding reboot=h to your grub command line. chuck ** Changed in: linux-source-2.6.15 linux-image-2.6.15-20-686 (Ubuntu) Status: Unconfirmed => Needs Info -- System doesn't power down under Dapper 686 https://launchpad.net/malone/bugs/39499 From zulcss at gmail.com Fri Apr 14 04:26:50 2006 From: zulcss at gmail.com (ChuckShort) Date: Fri, 14 Apr 2006 04:26:50 -0000 Subject: [Bug 39432] Re: Cannot activate dma on hard drive References: <20060413120023.13165.28701.malonedeb@gandwana.ubuntu.com> Message-ID: <20060414042650.1684.96716.malone@gangotri.ubuntu.com> Looks like this chipset is not added to our piix. Ill create a patch tomorrow morning. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Needs Info => In Progress ** Changed in: linux-source-2.6.15 (Ubuntu) Assignee: (unassigned) => ChuckShort -- Cannot activate dma on hard drive https://launchpad.net/malone/bugs/39432 From vR at movingparts.net Fri Apr 14 04:30:56 2006 From: vR at movingparts.net (Jason 'vanRijn' Kasper) Date: Fri, 14 Apr 2006 04:30:56 -0000 Subject: [Bug 39518] Re: kernel oops in usbserial on ppc with appletouch loaded (palm hotsync attempt) References: <20060414013959.1684.83034.malonedeb@gangotri.ubuntu.com> Message-ID: <20060414043056.16443.51047.malone@gandwana.ubuntu.com> Hm. Okay, that time, I couldn't even get an initial successful sync. This crash occurred on the first time I tried to sync.... Slightly different call stack this time... [ 9952.003335] Unable to handle kernel paging request for data at address 0x00000084 [ 9952.003356] Faulting instruction address: 0xf27565ec [ 9952.003368] Oops: Kernel access of bad area, sig: 11 [#1] [ 9952.003374] Modules linked in: visor usbserial nls_utf8 hfsplus radeon drm hci_usb rfcomm l2cap bluetooth cpufreq_powersave cpufreq_stats cpufreq_userspace cpufreq_ondemand cpufreq_conservative ipv6 af_packet arc4 ieee80211_crypt_wep ext3 jbd dm_mod md_mod sr_mod snd_powermac snd_pcm_oss snd_mixer_oss snd_pcm snd_timer snd soundcore snd_page_alloc sbp2 scsi_mod apm_emu joydev appletouch pcmcia bcm43xx ohci1394 usbhid ieee80211softmac ieee80211 ieee80211_crypt ieee1394 sungem sungem_phy uninorth_agp agpgart yenta_socket rsrc_nonstatic pcmcia_core tsdev evdev reiserfs ehci_hcd ohci_hcd usbcore ide_disk ide_cd cdrom i2c_keywest capability commoncap [ 9952.003449] NIP: F27565EC LR: C01799C8 CTR: F27565B0 [ 9952.003458] REGS: ea769d30 TRAP: 0300 Not tainted (2.6.15-20-powerpc) [ 9952.003464] MSR: 00009032 CR: 24242822 XER: 20000000 [ 9952.003478] DAR: 00000084, DSISR: 40000000 [ 9952.003484] TASK = edc9ad50[6584] 'kpilotDaemon' THREAD: ea768000 [ 9952.003490] GPR00: 00000000 EA769DE0 EDC9AD50 F275B0C0 F275B018 F275AC34 C0281B78 00000004 [ 9952.003505] GPR08: 00000004 F27565B0 00000001 00000001 44244828 100543C8 00000000 00001000 [ 9952.003519] GPR16: E51CA2B4 00000082 E51CA2AC E51CA2B0 0000000D 00000000 E51CA2A4 00000104 [ 9952.003534] GPR24: E51CA2A8 E51CA2AC 00000000 00000000 00000000 EE3EAC60 F2760000 00000000 [ 9952.003549] NIP [F27565EC] serial_chars_in_buffer+0x3c/0xc0 [usbserial] [ 9952.003576] LR [C01799C8] normal_poll+0x198/0x1e0 [ 9952.003595] Call Trace: [ 9952.003601] [EA769DE0] [0024AA25] 0x24aa25 (unreliable) [ 9952.003612] [EA769DF0] [C01799C8] normal_poll+0x198/0x1e0 [ 9952.003623] [EA769E10] [C0175E48] tty_poll+0x88/0xb0 [ 9952.003633] [EA769E30] [C0098E70] do_select+0x220/0x420 [ 9952.003644] [EA769EC0] [C009973C] sys_select+0x2bc/0x4c0 [ 9952.003654] [EA769F20] [C0004EEC] ppc_select+0x3c/0xf0 [ 9952.003667] [EA769F40] [C00115DC] ret_from_syscall+0x0/0x4c [ 9952.003680] --- Exception: c01 at 0xf933e24 [ 9952.003690] LR = 0xfc08144 [ 9952.003694] Instruction dump: [ 9952.012170] 3ca0f276 3884b018 38a5ac34 90010014 bfc10008 3fc0f276 801eeb84 2f800000 [ 9952.012191] 83e3096c 3c60f276 3863b0c0 409e0048 <801f0084> 7fe3fb78 3920ffea 2f800000 [ 9952.012208] -- kernel oops in usbserial on ppc with appletouch loaded (palm hotsync attempt) https://launchpad.net/malone/bugs/39518 From rob at robhughes.com Fri Apr 14 04:42:49 2006 From: rob at robhughes.com (Rob Hughes) Date: Fri, 14 Apr 2006 04:42:49 -0000 Subject: [Bug 39509] Re: Extended keys not working on Logitech MX 700 keyboard References: <20060413221654.16443.1168.malonedeb@gandwana.ubuntu.com> Message-ID: <20060414044249.1627.74166.malone@gangotri.ubuntu.com> Actually, this needs to move to xorg. I found the root problem. Xorg is trying to be smarter than the user. When I set up my udev rules to allow both mouse and keyboard events to come through the same symlinked event interface, xorg sees the keys on the mouse device and sets it up as a keyboard device. This, of course, causes xorg to fail to start since xorg then doesn't have a core pointer. And if you're wondering why anyone in their right mind would want both keyboard and mouse events to come through the same event interface, try installing a logitech mx 3100 combo set (mx 700 kb + mx 1000 mouse). This is the only way to make the extended keys work. Since it worked in hoary, there should be a way to make all this work in dapper. -- Extended keys not working on Logitech MX 700 keyboard https://launchpad.net/malone/bugs/39509 From tomwolfe at gmail.com Fri Apr 14 04:52:22 2006 From: tomwolfe at gmail.com (Thomas Wolfe) Date: Fri, 14 Apr 2006 04:52:22 -0000 Subject: [Bug 35213] Re: hibernate fails when not on AC power on HP Pavilion ZT3000 - regression from breezy References: <20060316170910.6510.54248.malonedeb@gangotri.ubuntu.com> Message-ID: <20060414045222.16492.80862.malone@gandwana.ubuntu.com> at first I thought I was having this problem https://launchpad.net/distros/ubuntu/+source/linux-source-2.6.15/+bug/36736/+index but this seems more like the issue I am having. Although it does this with suspend (ibm T41, Fn+F4) for me (going to try with hibernate, just want to post first since it will probably just lockup again). Would me being a rebel and deciding I do not need a swap partition be part of the problem? (guessing hibernate will not work since i do not have swap) I have 512MB RAM which I figured should be enough... I also tried leaving it sit for about 10 minutes but it would not come back. -- hibernate fails when not on AC power on HP Pavilion ZT3000 - regression from breezy https://launchpad.net/malone/bugs/35213 From jmsunseri at gmail.com Fri Apr 14 05:15:24 2006 From: jmsunseri at gmail.com (Justin Sunseri) Date: Fri, 14 Apr 2006 05:15:24 -0000 Subject: [Bug 39517] sound does't work on lenovo 3000 n1 References: <20060414005338.1627.82345.malonedeb@gangotri.ubuntu.com> Message-ID: <20060414051524.16443.18213.launchpad@canonical@gandwana.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Needs Info Description: 0000:00:1b.0 0403: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 02) this is the same chip that is in many of the new thinkpad laptops i have been told that "front" needs to be un muted. it is turned up to 70 and un muted. Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Needs Info Description: 0000:00:1b.0 0403: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 02) this is the same chip that is in many of the new thinkpad laptops i have been told that "front" needs to be un muted. it is turned up to 70 and un muted. -- sound does't work on lenovo 3000 n1 https://launchpad.net/malone/bugs/39517 From crimsun at fungus.sh.nu Fri Apr 14 05:16:49 2006 From: crimsun at fungus.sh.nu (Daniel T. Chen) Date: Fri, 14 Apr 2006 05:16:49 -0000 Subject: [Bug 39517] Re: sound does't work on lenovo 3000 n1 References: <20060414005338.1627.82345.malonedeb@gangotri.ubuntu.com> Message-ID: <20060414051649.1684.9380.malone@gangotri.ubuntu.com> Please attach the output from ``lspci -v && lspci -nv && tail -2 /proc/asound/oss/sndstat''. ** Changed in: Ubuntu Sourcepackagename: None => linux-source-2.6.15 Status: Unconfirmed => Needs Info ** Changed in: linux-source-2.6.15 (Ubuntu) Assignee: (unassigned) => Ubuntu Audio Team ** Summary changed: - sound does't work on lenovo 3000 n1 + Inaudible sound on Lenovo 3000 n1 -- Inaudible sound on Lenovo 3000 n1 https://launchpad.net/malone/bugs/39517 From jmsunseri at gmail.com Fri Apr 14 05:19:33 2006 From: jmsunseri at gmail.com (Justin Sunseri) Date: Fri, 14 Apr 2006 05:19:33 -0000 Subject: [Bug 39517] Re: Inaudible sound on Lenovo 3000 n1 References: <20060414005338.1627.82345.malonedeb@gangotri.ubuntu.com> Message-ID: <20060414051933.1627.36776.malone@gangotri.ubuntu.com> supertux at defendguin:~$ lspci -v && lspci -nv && tail -2 /proc/asound/oss/sndstat 0000:00:00.0 Host bridge: Intel Corporation Mobile Memory Controller Hub (rev 03) Subsystem: Lenovo: Unknown device 2061 Flags: bus master, fast devsel, latency 0 Capabilities: 0000:00:02.0 VGA compatible controller: Intel Corporation Mobile Integrated Graphics Controller (rev 03) (prog-if 00 [VGA]) Subsystem: Lenovo: Unknown device 2062 Flags: bus master, fast devsel, latency 0, IRQ 177 Memory at b0080000 (32-bit, non-prefetchable) [size=512K] I/O ports at 1800 [size=8] Memory at c0000000 (32-bit, prefetchable) [size=256M] Memory at b0040000 (32-bit, non-prefetchable) [size=256K] Capabilities: 0000:00:02.1 Display controller: Intel Corporation Mobile Integrated Graphics Controller (rev 03) Subsystem: Lenovo: Unknown device 2062 Flags: bus master, fast devsel, latency 0 Memory at b0100000 (32-bit, non-prefetchable) [size=512K] Capabilities: 0000:00:1b.0 0403: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 02) Subsystem: Lenovo: Unknown device 2066 Flags: bus master, fast devsel, latency 0, IRQ 233 Memory at b0000000 (64-bit, non-prefetchable) [size=16K] Capabilities: 0000:00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 02) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 Capabilities: 0000:00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 02) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 Memory behind bridge: b0200000-b02fffff Capabilities: 0000:00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #1 (rev 02) (prog-if 00 [UHCI]) Subsystem: Lenovo: Unknown device 206b Flags: bus master, medium devsel, latency 0, IRQ 217 I/O ports at 1820 [size=32] 0000:00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #2 (rev 02) (prog-if 00 [UHCI]) Subsystem: Lenovo: Unknown device 206c Flags: bus master, medium devsel, latency 0, IRQ 209 I/O ports at 1840 [size=32] 0000:00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #3 (rev 02) (prog-if 00 [UHCI]) Subsystem: Lenovo: Unknown device 206d Flags: bus master, medium devsel, latency 0, IRQ 225 I/O ports at 1860 [size=32] 0000:00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #4 (rev 02) (prog-if 00 [UHCI]) Subsystem: Lenovo: Unknown device 206e Flags: bus master, medium devsel, latency 0, IRQ 177 I/O ports at 1880 [size=32] 0000:00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 02) (prog-if 20 [EHCI]) Subsystem: Lenovo: Unknown device 206f Flags: bus master, medium devsel, latency 0, IRQ 217 Memory at b0004000 (32-bit, non-prefetchable) [size=1K] Capabilities: 0000:00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2) (prog-if 01 [Subtractive decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=05, subordinate=06, sec-latency=32 I/O behind bridge: 00002000-00002fff Memory behind bridge: b0300000-b03fffff Prefetchable memory behind bridge: 0000000030000000-0000000031f00000 Capabilities: 0000:00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02) Subsystem: Lenovo: Unknown device 2071 Flags: bus master, medium devsel, latency 0 Capabilities: 0000:00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7 Family) Serial ATA Storage Controllers cc=IDE (rev 02) (prog-if 80 [Master]) Subsystem: Lenovo: Unknown device 2072 Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 209 I/O ports at I/O ports at I/O ports at I/O ports at I/O ports at 18b0 [size=16] Capabilities: 0000:00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 02) Subsystem: Lenovo: Unknown device 2073 Flags: medium devsel, IRQ 10 I/O ports at 18c0 [size=32] 0000:03:00.0 Network controller: Intel Corporation: Unknown device 4227 (rev 02) Subsystem: Intel Corporation: Unknown device 1010 Flags: bus master, fast devsel, latency 0, IRQ 11 Memory at b0200000 (32-bit, non-prefetchable) [size=4K] Capabilities: 0000:05:01.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) Subsystem: Lenovo: Unknown device 2074 Flags: bus master, medium devsel, latency 64, IRQ 50 I/O ports at 2000 [size=256] Memory at b0300000 (32-bit, non-prefetchable) [size=256] Capabilities: 0000:05:04.0 CardBus bridge: ENE Technology Inc CB1410 Cardbus Controller (rev 01) Subsystem: Lenovo: Unknown device 2075 Flags: bus master, medium devsel, latency 168, IRQ 177 Memory at b0301000 (32-bit, non-prefetchable) [size=4K] Bus: primary=05, secondary=06, subordinate=09, sec-latency=176 Memory window 0: 30000000-31fff000 (prefetchable) Memory window 1: 32000000-33fff000 I/O window 0: 00002400-000024ff I/O window 1: 00002800-000028ff 16-bit legacy interface ports at 0001 0000:05:06.0 FireWire (IEEE 1394): Ricoh Co Ltd: Unknown device 0832 (prog-if 10 [OHCI]) Subsystem: Lenovo: Unknown device 2076 Flags: medium devsel, IRQ 233 Memory at b0300800 (32-bit, non-prefetchable) [size=2K] Capabilities: 0000:05:06.1 0805: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 19) Subsystem: Lenovo: Unknown device 2077 Flags: bus master, medium devsel, latency 64, IRQ 217 Memory at b0300400 (32-bit, non-prefetchable) [size=256] Capabilities: 0000:05:06.2 System peripheral: Ricoh Co Ltd: Unknown device 0843 (rev 01) Subsystem: Lenovo: Unknown device 2078 Flags: medium devsel, IRQ 7 Memory at b0302000 (32-bit, non-prefetchable) [disabled] [size=256] Capabilities: 0000:05:06.3 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 0a) Subsystem: Lenovo: Unknown device 2079 Flags: medium devsel, IRQ 7 Memory at b0302400 (32-bit, non-prefetchable) [disabled] [size=256] Capabilities: 0000:05:06.4 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 05) Subsystem: Lenovo: Unknown device 207a Flags: medium devsel, IRQ 7 Memory at b0302800 (32-bit, non-prefetchable) [disabled] [size=256] Capabilities: 0000:00:00.0 0600: 8086:27a0 (rev 03) Subsystem: 17aa:2061 Flags: bus master, fast devsel, latency 0 Capabilities: 0000:00:02.0 0300: 8086:27a2 (rev 03) Subsystem: 17aa:2062 Flags: bus master, fast devsel, latency 0, IRQ 177 Memory at b0080000 (32-bit, non-prefetchable) [size=512K] I/O ports at 1800 [size=8] Memory at c0000000 (32-bit, prefetchable) [size=256M] Memory at b0040000 (32-bit, non-prefetchable) [size=256K] Capabilities: 0000:00:02.1 0380: 8086:27a6 (rev 03) Subsystem: 17aa:2062 Flags: bus master, fast devsel, latency 0 Memory at b0100000 (32-bit, non-prefetchable) [size=512K] Capabilities: 0000:00:1b.0 0403: 8086:27d8 (rev 02) Subsystem: 17aa:2066 Flags: bus master, fast devsel, latency 0, IRQ 233 Memory at b0000000 (64-bit, non-prefetchable) [size=16K] Capabilities: 0000:00:1c.0 0604: 8086:27d0 (rev 02) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 Capabilities: 0000:00:1c.1 0604: 8086:27d2 (rev 02) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 Memory behind bridge: b0200000-b02fffff Capabilities: 0000:00:1d.0 0c03: 8086:27c8 (rev 02) Subsystem: 17aa:206b Flags: bus master, medium devsel, latency 0, IRQ 217 I/O ports at 1820 [size=32] 0000:00:1d.1 0c03: 8086:27c9 (rev 02) Subsystem: 17aa:206c Flags: bus master, medium devsel, latency 0, IRQ 209 I/O ports at 1840 [size=32] 0000:00:1d.2 0c03: 8086:27ca (rev 02) Subsystem: 17aa:206d Flags: bus master, medium devsel, latency 0, IRQ 225 I/O ports at 1860 [size=32] 0000:00:1d.3 0c03: 8086:27cb (rev 02) Subsystem: 17aa:206e Flags: bus master, medium devsel, latency 0, IRQ 177 I/O ports at 1880 [size=32] 0000:00:1d.7 0c03: 8086:27cc (rev 02) (prog-if 20) Subsystem: 17aa:206f Flags: bus master, medium devsel, latency 0, IRQ 217 Memory at b0004000 (32-bit, non-prefetchable) [size=1K] Capabilities: 0000:00:1e.0 0604: 8086:2448 (rev e2) (prog-if 01) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=05, subordinate=06, sec-latency=32 I/O behind bridge: 00002000-00002fff Memory behind bridge: b0300000-b03fffff Prefetchable memory behind bridge: 0000000030000000-0000000031f00000 Capabilities: 0000:00:1f.0 0601: 8086:27b9 (rev 02) Subsystem: 17aa:2071 Flags: bus master, medium devsel, latency 0 Capabilities: 0000:00:1f.2 0101: 8086:27c4 (rev 02) (prog-if 80 [Master]) Subsystem: 17aa:2072 Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 209 I/O ports at I/O ports at I/O ports at I/O ports at I/O ports at 18b0 [size=16] Capabilities: 0000:00:1f.3 0c05: 8086:27da (rev 02) Subsystem: 17aa:2073 Flags: medium devsel, IRQ 10 I/O ports at 18c0 [size=32] 0000:03:00.0 0280: 8086:4227 (rev 02) Subsystem: 8086:1010 Flags: bus master, fast devsel, latency 0, IRQ 11 Memory at b0200000 (32-bit, non-prefetchable) [size=4K] Capabilities: 0000:05:01.0 0200: 10ec:8139 (rev 10) Subsystem: 17aa:2074 Flags: bus master, medium devsel, latency 64, IRQ 50 I/O ports at 2000 [size=256] Memory at b0300000 (32-bit, non-prefetchable) [size=256] Capabilities: 0000:05:04.0 0607: 1524:1410 (rev 01) Subsystem: 17aa:2075 Flags: bus master, medium devsel, latency 168, IRQ 177 Memory at b0301000 (32-bit, non-prefetchable) [size=4K] Bus: primary=05, secondary=06, subordinate=09, sec-latency=176 Memory window 0: 30000000-31fff000 (prefetchable) Memory window 1: 32000000-33fff000 I/O window 0: 00002400-000024ff I/O window 1: 00002800-000028ff 16-bit legacy interface ports at 0001 0000:05:06.0 0c00: 1180:0832 (prog-if 10) Subsystem: 17aa:2076 Flags: medium devsel, IRQ 233 Memory at b0300800 (32-bit, non-prefetchable) [size=2K] Capabilities: 0000:05:06.1 0805: 1180:0822 (rev 19) Subsystem: 17aa:2077 Flags: bus master, medium devsel, latency 64, IRQ 217 Memory at b0300400 (32-bit, non-prefetchable) [size=256] Capabilities: 0000:05:06.2 0880: 1180:0843 (rev 01) Subsystem: 17aa:2078 Flags: medium devsel, IRQ 7 Memory at b0302000 (32-bit, non-prefetchable) [disabled] [size=256] Capabilities: 0000:05:06.3 0880: 1180:0592 (rev 0a) Subsystem: 17aa:2079 Flags: medium devsel, IRQ 7 Memory at b0302400 (32-bit, non-prefetchable) [disabled] [size=256] Capabilities: 0000:05:06.4 0880: 1180:0852 (rev 05) Subsystem: 17aa:207a Flags: medium devsel, IRQ 7 Memory at b0302800 (32-bit, non-prefetchable) [disabled] [size=256] Capabilities: Mixers: 0: Analog Devices AD1986A supertux at defendguin:~$ -- Inaudible sound on Lenovo 3000 n1 https://launchpad.net/malone/bugs/39517 From mail at carthik.net Fri Apr 14 05:17:33 2006 From: mail at carthik.net (Carthik Sharma) Date: Fri, 14 Apr 2006 05:17:33 -0000 Subject: [Bug 22555] Re: with ehci-hcd, kernel needs 3 minutes to detect USB stick References: <20060113141857.21012.27150.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060414051733.16443.62900.malone@gandwana.ubuntu.com> Hey Konrad! Sure we can check this out when we meet next at the LUG at UCF. Trying it out on my Dapper Laptop would help confirm/reject a few things. Interesting problem you have here! -- with ehci-hcd, kernel needs 3 minutes to detect USB stick https://launchpad.net/malone/bugs/22555 From mail at carthik.net Fri Apr 14 05:24:09 2006 From: mail at carthik.net (Carthik Sharma) Date: Fri, 14 Apr 2006 05:24:09 -0000 Subject: [Bug 24165] Re: Hang on boot References: <20060113142740.21012.20373.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060414052409.16443.88430.malone@gandwana.ubuntu.com> Thank you for reporting this bug and following up on it. I am marking this bug Closed since there has been no response from you for over three months. We would like to fix all existing issues, but need need feedback to help with debugging. Should you still have a problem with the latest up to date Dapper kernel and packages, please reopen this bug. In this case, please answer the questions that have already been asked of you before and provide the log files and information required for debugging. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Needs Info => Rejected -- Hang on boot https://launchpad.net/malone/bugs/24165 From mail at carthik.net Fri Apr 14 05:23:14 2006 From: mail at carthik.net (Carthik Sharma) Date: Fri, 14 Apr 2006 05:23:14 -0000 Subject: [Bug 24140] Re: Problems with LapTop hp nx6125 (Semprom) References: <20060113142731.21012.19276.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060414052314.16443.30019.malone@gandwana.ubuntu.com> Thank you for reporting this bug and following up on it. I am marking this bug Closed since there has been no response from you for over three months. We would like to fix all existing issues, but need need feedback to help with debugging. Should you still have a problem with the latest up to date Dapper kernel and packages, please reopen this bug. In this case, please answer the questions that have already been asked of you before and provide the log files and information required for debugging. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Needs Info => Rejected -- Problems with LapTop hp nx6125 (Semprom) https://launchpad.net/malone/bugs/24140 From crimsun at fungus.sh.nu Fri Apr 14 05:28:53 2006 From: crimsun at fungus.sh.nu (Daniel T. Chen) Date: Fri, 14 Apr 2006 05:28:53 -0000 Subject: [Bug 39517] Re: Inaudible sound on Lenovo 3000 n1 References: <20060414005338.1627.82345.malonedeb@gangotri.ubuntu.com> Message-ID: <20060414052853.1684.14612.malone@gangotri.ubuntu.com> 0000:00:1b.0 0403: 8086:27d8 (rev 02) Subsystem: 17aa:2066 does not appear in our sound/pci/hda/patch_analog.c . Querying on irc. -- Inaudible sound on Lenovo 3000 n1 https://launchpad.net/malone/bugs/39517 From acornejo at ieee.org Fri Apr 14 05:29:04 2006 From: acornejo at ieee.org (Alejandro Cornejo) Date: Fri, 14 Apr 2006 05:29:04 -0000 Subject: [Bug 38688] Re: unable to boot References: <20060408070420.32313.56814.malonedeb@gandwana.ubuntu.com> Message-ID: <20060414052904.16443.56354.malone@gandwana.ubuntu.com> Well, still no response from the developers, however, for anyone expiriencing this bug, here is a quick & dirty fix: The problem is that the pnpacpi module is claiming more adresses than it should, or its not properly sharing this address space with libata/ata_piix. If you append the option pnpacpi=off to your kernel the problem should disappear. Its not much of a solution if you ask me, but it works, and it seems the kernel guys are too busy with other bugs to fix this right now. So use it as a palliative until this bug is properly fixed. Good night, and good luck ;) -- unable to boot https://launchpad.net/malone/bugs/38688 From mail at carthik.net Fri Apr 14 05:27:10 2006 From: mail at carthik.net (Carthik Sharma) Date: Fri, 14 Apr 2006 05:27:10 -0000 Subject: [Bug 24047] Re: No networking with Intel PRO/100 nor with Cisco Airo References: <20060113142703.21012.54209.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060414052710.1627.64415.malone@gangotri.ubuntu.com> Hi Markus, Thank you for reporting this bug. Can you please try using the latest Dapper (flight 6 or later) Kernel and packages and see if the problem persists? Thank you. -- No networking with Intel PRO/100 nor with Cisco Airo https://launchpad.net/malone/bugs/24047 From mail at carthik.net Fri Apr 14 05:38:47 2006 From: mail at carthik.net (Carthik Sharma) Date: Fri, 14 Apr 2006 05:38:47 -0000 Subject: [Bug 20958] Re: WLAN/Sound leds don't work References: <20060113141005.21012.71587.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060414053847.16492.8412.malone@gandwana.ubuntu.com> Thank you for reporting this bug and following up on it. I am marking this bug Closed since there has been no response from you for over three months. We would like to fix all existing issues, but need need feedback to help with debugging. Should you still have a problem with the latest up to date Dapper kernel and packages, please reopen this bug. In this case, please answer the questions that have already been asked of you before and provide the log files and information required for debugging. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Needs Info => Rejected -- WLAN/Sound leds don't work https://launchpad.net/malone/bugs/20958 From mail at carthik.net Fri Apr 14 05:38:10 2006 From: mail at carthik.net (Carthik Sharma) Date: Fri, 14 Apr 2006 05:38:10 -0000 Subject: [Bug 20807] Re: kernel crash powernowd/pg0+499863808/1070015488 References: <20060113140920.21012.16114.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060414053810.1627.76648.malone@gangotri.ubuntu.com> Thank you for reporting this bug and following up on it. I am marking this bug Closed since there has been no response from you for over three months. We would like to fix all existing issues, but need need feedback to help with debugging. Should you still have a problem with the latest up to date Dapper kernel and packages, please reopen this bug. In this case, please answer the questions that have already been asked of you before and provide the log files and information required for debugging. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Needs Info => Rejected -- kernel crash powernowd/pg0+499863808/1070015488 https://launchpad.net/malone/bugs/20807 From mail at carthik.net Fri Apr 14 05:37:24 2006 From: mail at carthik.net (Carthik Sharma) Date: Fri, 14 Apr 2006 05:37:24 -0000 Subject: [Bug 20806] Re: Kernel crash after ACPI fails to perform AE_TIME handler method References: <20060113140920.21012.42073.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060414053724.16492.67661.malone@gandwana.ubuntu.com> Thank you for reporting this bug and following up on it. I am marking this bug Closed since there has been no response from you for over three months. We would like to fix all existing issues, but need need feedback to help with debugging. Should you still have a problem with the latest up to date Dapper kernel and packages, please reopen this bug. In this case, please answer the questions that have already been asked of you before and provide the log files and information required for debugging. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Needs Info => Rejected -- Kernel crash after ACPI fails to perform AE_TIME handler method https://launchpad.net/malone/bugs/20806 From mail at carthik.net Fri Apr 14 05:36:39 2006 From: mail at carthik.net (Carthik Sharma) Date: Fri, 14 Apr 2006 05:36:39 -0000 Subject: [Bug 20386] Re: ndiswrapper freezes on boot while searching References: <20060113140705.21012.96768.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060414053639.16443.37028.malone@gandwana.ubuntu.com> Thank you for reporting this bug and following up on it. I am marking this bug Closed since there has been no response from you for over three months. We would like to fix all existing issues, but need need feedback to help with debugging. Should you still have a problem with the latest up to date Dapper kernel and packages, please reopen this bug. In this case, please answer the questions that have already been asked of you before and provide the log files and information required for debugging. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Needs Info => Rejected -- ndiswrapper freezes on boot while searching https://launchpad.net/malone/bugs/20386 From mail at carthik.net Fri Apr 14 05:35:57 2006 From: mail at carthik.net (Carthik Sharma) Date: Fri, 14 Apr 2006 05:35:57 -0000 Subject: [Bug 20321] Re: Sleep and Hibernation problem with Fujistu-Siemens S4546 Laptop (ubuntu kernel 686) References: <20060113140643.21012.97721.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060414053557.1627.58682.malone@gangotri.ubuntu.com> Thank you for reporting this bug and following up on it. I am marking this bug Closed since there has been no response from you for over three months. We would like to fix all existing issues, but need need feedback to help with debugging. Should you still have a problem with the latest up to date Dapper kernel and packages, please reopen this bug. In this case, please answer the questions that have already been asked of you before and provide the log files and information required for debugging. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Needs Info => Rejected -- Sleep and Hibernation problem with Fujistu-Siemens S4546 Laptop (ubuntu kernel 686) https://launchpad.net/malone/bugs/20321 From mail at carthik.net Fri Apr 14 05:35:16 2006 From: mail at carthik.net (Carthik Sharma) Date: Fri, 14 Apr 2006 05:35:16 -0000 Subject: [Bug 20062] Re: Keyboard non-responsive when using kernel 2.6.12 (breezy) References: <20060113140508.21012.73082.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060414053516.16443.49589.malone@gandwana.ubuntu.com> Can somebody please provide the dmesg output Ben requested? Results from using the latest Dapper kernel would be great. You can install Dapper from the Flight 6 testing CDs. Thank you. -- Keyboard non-responsive when using kernel 2.6.12 (breezy) https://launchpad.net/malone/bugs/20062 From jmsunseri at gmail.com Fri Apr 14 05:40:14 2006 From: jmsunseri at gmail.com (Justin Sunseri) Date: Fri, 14 Apr 2006 05:40:14 -0000 Subject: [Bug 39517] Re: Inaudible sound on Lenovo 3000 n1 References: <20060414005338.1627.82345.malonedeb@gangotri.ubuntu.com> Message-ID: <20060414054014.1627.50884.launchpad@gangotri.ubuntu.com> ** Attachment added: "amixer -c0 output" http://librarian.launchpad.net/2107633/amixer -- Inaudible sound on Lenovo 3000 n1 https://launchpad.net/malone/bugs/39517 From mail at carthik.net Fri Apr 14 05:40:34 2006 From: mail at carthik.net (Carthik Sharma) Date: Fri, 14 Apr 2006 05:40:34 -0000 Subject: [Bug 20988] Re: Data Corruption on AMD64 SATA System with Breezy Badger References: <20060113141014.21012.4945.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060414054035.1684.45421.malone@gangotri.ubuntu.com> Thank you for reporting this bug and following up on it. I am marking this bug Closed since there has been no response from you for over three months. We would like to fix all existing issues, but need need feedback to help with debugging. Should you still have a problem with the latest up to date Dapper kernel and packages, please reopen this bug. In this case, please answer the questions that have already been asked of you before and provide the log files and information required for debugging. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Needs Info => Rejected -- Data Corruption on AMD64 SATA System with Breezy Badger https://launchpad.net/malone/bugs/20988 From crimsun at fungus.sh.nu Fri Apr 14 06:03:30 2006 From: crimsun at fungus.sh.nu (Daniel T. Chen) Date: Fri, 14 Apr 2006 06:03:30 -0000 Subject: [Bug 39517] Re: Inaudible sound on Lenovo 3000 n1 References: <20060414005338.1627.82345.malonedeb@gangotri.ubuntu.com> Message-ID: <20060414060330.16492.83203.malone@gandwana.ubuntu.com> https://lists.ubuntu.com/archives/kernel-team/2006-April/000833.html ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Needs Info => Fix Committed ** Summary changed: - Inaudible sound on Lenovo 3000 n1 + Inaudible sound on Lenovo 3000 N100-07684JU -- Inaudible sound on Lenovo 3000 N100-07684JU https://launchpad.net/malone/bugs/39517 From chrisime at gnome.org Fri Apr 14 08:17:38 2006 From: chrisime at gnome.org (Christian Meyer) Date: Fri, 14 Apr 2006 08:17:38 -0000 Subject: [Bug 36736] Re: Laptop doesn't wakeup after sleep References: <20060326141302.6279.83357.malonedeb@gandwana.ubuntu.com> Message-ID: <20060414081738.1627.54118.malone@gangotri.ubuntu.com> lspci: 0000:00:00.0 Host bridge: Intel Corporation 82855PM Processor to I/O Controller (rev 03) 0000:00:01.0 PCI bridge: Intel Corporation 82855PM Processor to AGP Controller (rev 03) 0000:00:1d.0 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 01) 0000:00:1d.1 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 01) 0000:00:1d.2 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 (rev 01) 0000:00:1d.7 USB Controller: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller (rev 01) 0000:00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 81) 0000:00:1f.0 ISA bridge: Intel Corporation 82801DBM (ICH4-M) LPC Interface Bridge (rev 01) 0000:00:1f.1 IDE interface: Intel Corporation 82801DBM (ICH4-M) IDE Controller (rev 01) 0000:00:1f.3 SMBus: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller (rev 01) 0000:00:1f.5 Multimedia audio controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 01) 0000:00:1f.6 Modem: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller (rev 01) 0000:01:00.0 VGA compatible controller: ATI Technologies Inc Radeon Mobility M7 LW [Radeon Mobility 7500] 0000:02:00.0 CardBus bridge: Texas Instruments PCI4520 PC card Cardbus Controller (rev 01) 0000:02:00.1 CardBus bridge: Texas Instruments PCI4520 PC card Cardbus Controller (rev 01) 0000:02:01.0 Ethernet controller: Intel Corporation 82540EP Gigabit Ethernet Controller (Mobile) (rev 03) 0000:02:02.0 Network controller: Intel Corporation PRO/Wireless LAN 2100 3B Mini PCI Adapter (rev 04) The video driver is "ati", option "DynamicClocks" "on" SMBIOS 2.33 present. 61 structures occupying 2127 bytes. Table at 0x000E0010. Handle 0x0000, DMI type 0, 20 bytes. BIOS Information Vendor: IBM Version: 1RETDNWW (3.19 ) Release Date: 10/13/2005 Address: 0xDC000 Runtime Size: 144 kB ROM Size: 1024 kB Characteristics: PCI is supported PC Card (PCMCIA) is supported PNP is supported APM is supported BIOS is upgradeable BIOS shadowing is allowed ESCD support is available Boot from CD is supported Selectable boot is supported EDD is supported 3.5"/720 KB floppy services are supported (int 13h) Print screen service is supported (int 5h) 8042 keyboard services are supported (int 9h) Serial services are supported (int 14h) Printer services are supported (int 17h) CGA/mono video services are supported (int 10h) ACPI is supported USB legacy is supported AGP is supported BIOS boot specification is supported Handle 0x0001, DMI type 1, 25 bytes. System Information Manufacturer: IBM Product Name: 23731FG Version: ThinkPad T41 Serial Number: 99WCWFH UUID: 26672881-45D0-11CB-87FC-DB2A51FE3D86 Wake-up Type: Power Switch Handle 0x0002, DMI type 2, 8 bytes. Base Board Information Manufacturer: IBM Product Name: 23731FG Version: Not Available Serial Number: J1UBE3CF1PY Handle 0x0003, DMI type 3, 17 bytes. Chassis Information Manufacturer: IBM Type: Notebook Lock: Not Present Version: Not Available Serial Number: Not Available Asset Tag: No Asset Information Boot-up State: Unknown Power Supply State: Unknown Thermal State: Unknown Security Status: Unknown OEM Information: 0x00000000 Handle 0x0004, DMI type 126, 17 bytes. Inactive Handle 0x0005, DMI type 126, 17 bytes. Inactive Handle 0x0006, DMI type 4, 35 bytes. Processor Information Socket Designation: None Type: Central Processor Family: Pentium M Manufacturer: GenuineIntel ID: 95 06 00 00 BF F9 E9 A7 Signature: Type 0, Family 6, Model 9, Stepping 5 Flags: FPU (Floating-point unit on-chip) VME (Virtual mode extension) DE (Debugging extension) PSE (Page size extension) TSC (Time stamp counter) MSR (Model specific registers) MCE (Machine check exception) CX8 (CMPXCHG8 instruction supported) SEP (Fast system call) MTRR (Memory type range registers) PGE (Page global enable) MCA (Machine check architecture) CMOV (Conditional move instruction supported) PAT (Page attribute table) CLFSH (CLFLUSH instruction supported) DS (Debug store) ACPI (ACPI supported) MMX (MMX technology supported) FXSR (Fast floating-point save and restore) SSE (Streaming SIMD extensions) SSE2 (Streaming SIMD extensions 2) TM (Thermal monitor supported) PBE (Pending break enabled) Version: Intel(R) Pentium(R) M processor Voltage: 1.5 V External Clock: 400 MHz Max Speed: 1400 MHz Current Speed: 1400 MHz Status: Populated, Enabled Upgrade: None L1 Cache Handle: 0x000A L2 Cache Handle: 0x000B L3 Cache Handle: Not Provided Serial Number: Not Specified Asset Tag: Not Specified Part Number: Not Specified Handle 0x0007, DMI type 5, 20 bytes. Memory Controller Information Error Detecting Method: None Error Correcting Capabilities: None Supported Interleave: One-way Interleave Current Interleave: One-way Interleave Maximum Memory Module Size: 1024 MB Maximum Total Memory Size: 2048 MB Supported Speeds: Other Supported Memory Types: DIMM SDRAM Memory Module Voltage: 2.9 V Associated Memory Slots: 2 0x0008 0x0009 Enabled Error Correcting Capabilities: None Handle 0x0008, DMI type 6, 12 bytes. Memory Module Information Socket Designation: DIMM Slot 1 Bank Connections: 0 1 Current Speed: Unknown Type: DIMM SDRAM Installed Size: 256 MB (Double-bank Connection) Enabled Size: 256 MB (Double-bank Connection) Error Status: OK Handle 0x0009, DMI type 6, 12 bytes. Memory Module Information Socket Designation: DIMM Slot 2 Bank Connections: 2 3 Current Speed: Unknown Type: DIMM SDRAM Installed Size: 256 MB (Double-bank Connection) Enabled Size: 256 MB (Double-bank Connection) Error Status: OK Handle 0x000A, DMI type 7, 19 bytes. Cache Information Socket Designation: Internal L1 Cache Configuration: Enabled, Socketed, Level 1 Operational Mode: Write Back Location: Internal Installed Size: 32 KB Maximum Size: 32 KB Supported SRAM Types: Synchronous Installed SRAM Type: Synchronous Speed: Unknown Error Correction Type: Unknown System Type: Other Associativity: 8-way Set-associative Handle 0x000B, DMI type 7, 19 bytes. Cache Information Socket Designation: Internal L2 Cache Configuration: Enabled, Socketed, Level 2 Operational Mode: Write Back Location: Internal Installed Size: 1024 KB Maximum Size: 1024 KB Supported SRAM Types: Burst Installed SRAM Type: Burst Speed: Unknown Error Correction Type: Multi-bit ECC System Type: Unified Associativity: 8-way Set-associative Handle 0x000C, DMI type 126, 9 bytes. Inactive Handle 0x000D, DMI type 8, 9 bytes. Port Connector Information Internal Reference Designator: Not Available Internal Connector Type: None External Reference Designator: Infrared External Connector Type: Infrared Port Type: Other Handle 0x000E, DMI type 8, 9 bytes. Port Connector Information Internal Reference Designator: Not Available Internal Connector Type: None External Reference Designator: Parallel External Connector Type: DB-25 female Port Type: Parallel Port ECP/EPP Handle 0x000F, DMI type 8, 9 bytes. Port Connector Information Internal Reference Designator: Not Available Internal Connector Type: None External Reference Designator: External Monitor External Connector Type: DB-15 female Port Type: Video Port Handle 0x0010, DMI type 126, 9 bytes. Inactive Handle 0x0011, DMI type 126, 9 bytes. Inactive Handle 0x0012, DMI type 126, 9 bytes. Inactive Handle 0x0013, DMI type 126, 9 bytes. Inactive Handle 0x0014, DMI type 126, 9 bytes. Inactive Handle 0x0015, DMI type 8, 9 bytes. Port Connector Information Internal Reference Designator: Not Available Internal Connector Type: None External Reference Designator: Microphone Jack External Connector Type: Mini Jack (headphones) Port Type: Audio Port Handle 0x0016, DMI type 8, 9 bytes. Port Connector Information Internal Reference Designator: Not Available Internal Connector Type: None External Reference Designator: Headphone Jack External Connector Type: Mini Jack (headphones) Port Type: Audio Port Handle 0x0017, DMI type 8, 9 bytes. Port Connector Information Internal Reference Designator: Not Available Internal Connector Type: None External Reference Designator: S-Video-Out External Connector Type: Other Port Type: Video Port Handle 0x0018, DMI type 126, 9 bytes. Inactive Handle 0x0019, DMI type 8, 9 bytes. Port Connector Information Internal Reference Designator: Not Available Internal Connector Type: None External Reference Designator: Modem External Connector Type: RJ-11 Port Type: Modem Port Handle 0x001A, DMI type 8, 9 bytes. Port Connector Information Internal Reference Designator: Not Available Internal Connector Type: None External Reference Designator: Ethernet External Connector Type: RJ-45 Port Type: Network Port Handle 0x001B, DMI type 8, 9 bytes. Port Connector Information Internal Reference Designator: Not Available Internal Connector Type: None External Reference Designator: USB 1 External Connector Type: Access Bus (USB) Port Type: USB Handle 0x001C, DMI type 8, 9 bytes. Port Connector Information Internal Reference Designator: Not Available Internal Connector Type: None External Reference Designator: USB 2 External Connector Type: Access Bus (USB) Port Type: USB Handle 0x001D, DMI type 126, 9 bytes. Inactive Handle 0x001E, DMI type 126, 9 bytes. Inactive Handle 0x001F, DMI type 126, 9 bytes. Inactive Handle 0x0020, DMI type 126, 9 bytes. Inactive Handle 0x0021, DMI type 126, 9 bytes. Inactive Handle 0x0022, DMI type 9, 13 bytes. System Slot Information Designation: CardBus Slot 1 Type: 32-bit PC Card (PCMCIA) Current Usage: Available Length: Other ID: Adapter 0, Socket 0 Characteristics: 5.0 V is provided 3.3 V is provided PC Card-16 is supported Cardbus is supported Zoom Video is supported Modem ring resume is supported PME signal is supported Hot-plug devices are supported Handle 0x0023, DMI type 9, 13 bytes. System Slot Information Designation: CardBus Slot 2 Type: 32-bit PC Card (PCMCIA) Current Usage: Available Length: Other ID: Adapter 1, Socket 0 Characteristics: 5.0 V is provided 3.3 V is provided PC Card-16 is supported Cardbus is supported Zoom Video is supported Modem ring resume is supported PME signal is supported Hot-plug devices are supported Handle 0x0024, DMI type 126, 13 bytes. Inactive Handle 0x0025, DMI type 126, 13 bytes. Inactive Handle 0x0026, DMI type 9, 13 bytes. System Slot Information Designation: Mini-PCI Slot 1 Type: 32-bit PCI Current Usage: Available Length: Other ID: 1 Characteristics: 5.0 V is provided 3.3 V is provided PME signal is supported SMBus signal is supported Handle 0x0027, DMI type 126, 13 bytes. Inactive Handle 0x0028, DMI type 10, 6 bytes. On Board Device Information Type: Other Status: Enabled Description: IBM Embedded Security hardware Handle 0x0029, DMI type 11, 5 bytes. OEM Strings String 1: IBM ThinkPad Embedded Controller -[1RHT71WW-3.04 ]- Handle 0x002A, DMI type 13, 22 bytes. BIOS Language Information Installable Languages: 1 enUS Currently Installed Language: enUS Handle 0x002B, DMI type 15, 25 bytes. System Event Log Area Length: 0 bytes Header Start Offset: 0x0000 Header Length: 16 bytes Data Start Offset: 0x0010 Access Method: General-purpose non-volatile data functions Access Address: 0x0000 Status: Invalid, Not Full Change Token: 0x00000000 Header Format: Type 1 Supported Log Type Descriptors: 1 Descriptor 1: POST error Data Format 1: POST results bitmap Handle 0x002C, DMI type 16, 15 bytes. Physical Memory Array Location: System Board Or Motherboard Use: System Memory Error Correction Type: None Maximum Capacity: 1 GB Error Information Handle: Not Provided Number Of Devices: 2 Handle 0x002D, DMI type 17, 27 bytes. Memory Device Array Handle: 0x002C Error Information Handle: No Error Total Width: 64 bits Data Width: 64 bits Size: 256 MB Form Factor: SODIMM Set: None Locator: DIMM 1 Bank Locator: Bank 0/1 Type: DDR Type Detail: Synchronous Speed: Unknown Manufacturer: Not Specified Serial Number: Not Specified Asset Tag: Not Specified Part Number: Not Specified Handle 0x002E, DMI type 17, 27 bytes. Memory Device Array Handle: 0x002C Error Information Handle: No Error Total Width: 64 bits Data Width: 64 bits Size: 256 MB Form Factor: SODIMM Set: None Locator: DIMM 2 Bank Locator: Bank 2/3 Type: DDR Type Detail: Synchronous Speed: Unknown Manufacturer: Not Specified Serial Number: Not Specified Asset Tag: Not Specified Part Number: Not Specified Handle 0x002F, DMI type 18, 23 bytes. 32-bit Memory Error Information Type: OK Granularity: Unknown Operation: Unknown Vendor Syndrome: Unknown Memory Array Address: Unknown Device Address: Unknown Resolution: Unknown Handle 0x0030, DMI type 19, 15 bytes. Memory Array Mapped Address Starting Address: 0x00000000000 Ending Address: 0x0001FFFFFFF Range Size: 512 MB Physical Array Handle: 0x002C Partition Width: 0 Handle 0x0031, DMI type 20, 19 bytes. Memory Device Mapped Address Starting Address: 0x00000000000 Ending Address: 0x0000FFFFFFF Range Size: 256 MB Physical Device Handle: 0x002D Memory Array Mapped Address Handle: 0x0030 Partition Row Position: 1 Handle 0x0032, DMI type 20, 19 bytes. Memory Device Mapped Address Starting Address: 0x00010000000 Ending Address: 0x0001FFFFFFF Range Size: 256 MB Physical Device Handle: 0x002E Memory Array Mapped Address Handle: 0x0030 Partition Row Position: 1 Handle 0x0033, DMI type 21, 7 bytes. Built-in Pointing Device Type: Track Point Interface: PS/2 Buttons: 3 Handle 0x0034, DMI type 21, 7 bytes. Built-in Pointing Device Type: Touch Pad Interface: PS/2 Buttons: 0 Handle 0x0035, DMI type 24, 5 bytes. Hardware Security Power-On Password Status: Disabled Keyboard Password Status: Disabled Administrator Password Status: Disabled Front Panel Reset Status: Unknown Handle 0x0036, DMI type 32, 11 bytes. System Boot Information Status: No errors detected Handle 0x0037, DMI type 131, 102 bytes. OEM-specific Type Header and Data: 83 66 37 00 01 00 00 00 00 01 72 03 40 00 AE 80 00 02 00 00 00 00 00 2A 00 40 2A 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 16 00 80 16 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Strings: IBMCFGDATA Handle 0x0038, DMI type 131, 17 bytes. OEM-specific Type Header and Data: 83 11 38 00 01 02 03 FF FF 1F 00 00 00 00 00 02 00 Strings: BOOTINF 20h BOOTDEV 21h KEYPTRS 23h Handle 0x0039, DMI type 132, 7 bytes. OEM-specific Type Header and Data: 84 07 39 00 01 D8 36 Handle 0x003A, DMI type 133, 5 bytes. OEM-specific Type Header and Data: 85 05 3A 00 01 Strings: KHOIHGIUCCHHII Handle 0x003B, DMI type 126, 13 bytes. Inactive Handle 0x003C, DMI type 127, 4 bytes. End Of Table -- Laptop doesn't wakeup after sleep https://launchpad.net/malone/bugs/36736 From correia at brutele.be Fri Apr 14 08:25:31 2006 From: correia at brutele.be (Antonio Ricardo Soares da Silva Correia) Date: Fri, 14 Apr 2006 08:25:31 -0000 Subject: [Bug 24533] Fail to boot smp kernel References: <20060113142932.21012.10689.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060414082531.16443.69772.launchpad@canonical@gandwana.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: Medium Status: Unconfirmed Description: Since Hoary through last version of Breezy smp kernels fail to boot on my Pentium IV with hyperthreading. Every other versions of Linux (ie. Mandrake, Debian, Knopix,etc) boot smp kernels without problem. The system freezes in X grey screen before the KDE login and a hard reboot is needed. Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: Medium Status: Unconfirmed Description: Since Hoary through last version of Breezy smp kernels fail to boot on my Pentium IV with hyperthreading. Every other versions of Linux (ie. Mandrake, Debian, Knopix,etc) boot smp kernels without problem. The system freezes in X grey screen before the KDE login and a hard reboot is needed. -- Fail to boot smp kernel https://launchpad.net/malone/bugs/24533 From robitaille at gmail.com Fri Apr 14 08:24:01 2006 From: robitaille at gmail.com (Daniel Robitaille) Date: Fri, 14 Apr 2006 08:24:01 -0000 Subject: [Bug 24533] Re: Fail to boot smp kernel References: <20060113142932.21012.10689.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060414082401.1684.20051.malone@gangotri.ubuntu.com> Antonio, Have you tried this with a more recent Dapper kernel? ** Changed in: Ubuntu Sourcepackagename: None => linux-source-2.6.15 -- Fail to boot smp kernel https://launchpad.net/malone/bugs/24533 From peter at liedler.at Fri Apr 14 09:20:37 2006 From: peter at liedler.at (Peter Liedler) Date: Fri, 14 Apr 2006 09:20:37 -0000 Subject: [Bug 39253] Re: Enter in hibernate mode ASUS W5F References: <20060412073041.32233.48934.malonedeb@gandwana.ubuntu.com> Message-ID: <20060414092037.16443.51542.malone@gandwana.ubuntu.com> Waited for half an hour, but system didn't really hibernate or power off without power cord. Anything else I can try, a debug mode to create logs? -- Enter in hibernate mode ASUS W5F https://launchpad.net/malone/bugs/39253 From alessandro.eterni at googlemail.com Fri Apr 14 11:36:28 2006 From: alessandro.eterni at googlemail.com (Alessandro) Date: Fri, 14 Apr 2006 11:36:28 -0000 Subject: [Bug 24140] Re: [Bug 24140] Re: Problems with LapTop hp nx6125 (Semprom) References: <20060113142731.21012.19276.launchpad@macquarie.warthogs.hbd.com> <20060414052314.16443.30019.malone@gandwana.ubuntu.com> Message-ID: <798523380604140436p75695e44mb6b28ce2563fdc5d@mail.gmail.com> It'not an Ubuntu Problem....but a kernel problem. At the moment there is another bug on kernel.org. 2006/4/14, Carthik Sharma : > Thank you for reporting this bug and following up on it. > > I am marking this bug Closed since there has been no response from you for over three months. We would like to fix all existing issues, but need need feedback to help with debugging. > > Should you still have a problem with the latest up to date Dapper kernel and packages, please reopen this bug. In this case, please answer the questions that have already been asked of you before and provide the log files and information required for debugging. > > > ** Changed in: linux-source-2.6.15 (Ubuntu) > Status: Needs Info => Rejected > -- > Problems with LapTop hp nx6125 (Semprom) > https://launchpad.net/malone/bugs/24140 > -- Alessandro Eterni -- Problems with LapTop hp nx6125 (Semprom) https://launchpad.net/malone/bugs/24140 From toojays at toojays.net Fri Apr 14 12:06:52 2006 From: toojays at toojays.net (John Steele Scott) Date: Fri, 14 Apr 2006 12:06:52 -0000 Subject: [Bug 37714] Re: Sound garbled after resume after suspend References: <20060402122926.5415.33178.malonedeb@gangotri.ubuntu.com> Message-ID: <20060414120652.1684.55178.malone@gangotri.ubuntu.com> I can confirm this. Thanks for the workaround Ulrik, it saves me a reboot. For me, the problem is triggered if I have amarok open when I sleep. I don't actually have to be playing music, the app just has to be running. Then when I resume, amarok will no longer play any sound, and the sound in wesnoth plays, but is garbled as described by Ulrik. ** Changed in: linux-meta linux-image-2.6-powerpc (Ubuntu) Status: Unconfirmed => Confirmed -- Sound garbled after resume after suspend https://launchpad.net/malone/bugs/37714 From toojays at toojays.net Fri Apr 14 12:10:58 2006 From: toojays at toojays.net (John Steele Scott) Date: Fri, 14 Apr 2006 12:10:58 -0000 Subject: [Bug 36033] Re: headphone detection on ibook G4 with Snapper out of order References: <20060322165531.30471.21013.malonedeb@gangotri.ubuntu.com> Message-ID: <20060414121058.16492.95733.launchpad@gandwana.ubuntu.com> *** This bug is a duplicate of bug 32394 *** ** This bug has been marked a duplicate of bug 32394 weird interaction between headphone detect and auto mute on iBook G4 (snapper/tumbler) -- headphone detection on ibook G4 with Snapper out of order https://launchpad.net/malone/bugs/36033 From toojays at toojays.net Fri Apr 14 12:10:58 2006 From: toojays at toojays.net (John Steele Scott) Date: Fri, 14 Apr 2006 12:10:58 -0000 Subject: [Bug 32394] Re: weird interaction between headphone detect and auto mute on iBook G4 (snapper/tumbler) References: <20060221234042.31322.68245.malonedeb@gangotri.ubuntu.com> Message-ID: <20060414121058.16492.52037.launchpad@gandwana.ubuntu.com> ** Bug 36033 has been marked a duplicate of this bug -- weird interaction between headphone detect and auto mute on iBook G4 (snapper/tumbler) https://launchpad.net/malone/bugs/32394 From ulrik.sverdrup at gmail.com Fri Apr 14 12:29:39 2006 From: ulrik.sverdrup at gmail.com (Ulrik Sverdrup) Date: Fri, 14 Apr 2006 12:29:39 -0000 Subject: [Bug 37714] Re: Sound garbled after resume after suspend References: <20060402122926.5415.33178.malonedeb@gangotri.ubuntu.com> Message-ID: <20060414122939.1627.59903.malone@gangotri.ubuntu.com> This bug is filed in the kernel, but that's only a guess made by me. Perhaps this belongs in the ibook sound driver "snapper" or in esd, eSound Daemon? -- Sound garbled after resume after suspend https://launchpad.net/malone/bugs/37714 From ben.collins at ubuntu.com Fri Apr 14 12:32:55 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Fri, 14 Apr 2006 12:32:55 -0000 Subject: [Bug 38688] Re: unable to boot References: <20060408070420.32313.56814.malonedeb@gandwana.ubuntu.com> Message-ID: <20060414123255.16443.27957.malone@gandwana.ubuntu.com> The "kernel developers" are just really busy, since it's close to a release. Believe me, I haven't lost site of this bug. -- unable to boot https://launchpad.net/malone/bugs/38688 From leo7offiz at arcor.de Fri Apr 14 12:34:43 2006 From: leo7offiz at arcor.de (Siebeneicher) Date: Fri, 14 Apr 2006 12:34:43 -0000 Subject: [Bug 34723] Re: iMac G5 Thermal Fan Support References: <20060313091457.30057.2443.malonedeb@gandwana.ubuntu.com> Message-ID: <20060414123443.1684.59745.malone@gangotri.ubuntu.com> I could confirm this Bug for Dapper Drake. My Computer: IMac G5, 1.6GHz /17'' -- iMac G5 Thermal Fan Support https://launchpad.net/malone/bugs/34723 From martin.bergner at online.de Fri Apr 14 12:32:44 2006 From: martin.bergner at online.de (Martin Bergner) Date: Fri, 14 Apr 2006 12:32:44 -0000 Subject: [Bug 35973] Re: Suspend to ram no longer working on Panasonc CF-R4 (regression from breezy) References: <20060322091255.30442.54042.malonedeb@gangotri.ubuntu.com> Message-ID: <20060414123245.1684.87157.malone@gangotri.ubuntu.com> Hi, what about the latest update to 2.6.15-20? Does suspend to ram work better now? Also, are you sure that the laptop hangs with the disk light on when you hibernate? How long do you wait before you define the laptop dead? Have you waited 30 minutes? Does hibernating work if you are plugged in to ac power? If so, is the problem similar to bug #35213? ** Changed in: linux-source-2.6.15 (Ubuntu) Severity: Normal => Major Status: Unconfirmed => Needs Info -- Suspend to ram no longer working on Panasonc CF-R4 (regression from breezy) https://launchpad.net/malone/bugs/35973 From martin.bergner at online.de Fri Apr 14 12:38:25 2006 From: martin.bergner at online.de (Martin Bergner) Date: Fri, 14 Apr 2006 12:38:25 -0000 Subject: [Bug 33855] Re: A new Panasonic ACPI driver is required for kernel-2.6.15 References: <20060306024325.22115.48779.malonedeb@gandwana.ubuntu.com> Message-ID: <20060414123825.1627.38638.launchpad@gangotri.ubuntu.com> ** Bug 35170 has been marked a duplicate of this bug -- A new Panasonic ACPI driver is required for kernel-2.6.15 https://launchpad.net/malone/bugs/33855 From martin.bergner at online.de Fri Apr 14 12:38:25 2006 From: martin.bergner at online.de (Martin Bergner) Date: Fri, 14 Apr 2006 12:38:25 -0000 Subject: [Bug 35170] Re: ACPI brightness, volume (everything) won't work in Dapper (Panasonic CF-Y4) References: <20060316081106.6510.58992.malonedeb@gangotri.ubuntu.com> Message-ID: <20060414123825.1627.84923.launchpad@gangotri.ubuntu.com> *** This bug is a duplicate of bug 33855 *** ** This bug has been marked a duplicate of bug 33855 A new Panasonic ACPI driver is required for kernel-2.6.15 -- ACPI brightness, volume (everything) won't work in Dapper (Panasonic CF-Y4) https://launchpad.net/malone/bugs/35170 From fmccormick at videotron.ca Fri Apr 14 12:58:08 2006 From: fmccormick at videotron.ca (Frank McCormick) Date: Fri, 14 Apr 2006 12:58:08 -0000 Subject: [Bug 39499] Re: System doesn't power down under Dapper 686 References: <20060413211152.16443.87018.malonedeb@gandwana.ubuntu.com> Message-ID: <20060414125808.16492.27017.malone@gandwana.ubuntu.com> The reboot=h doesn't solve my booting problem. Instead of hard locking at loading hardware drivers, it now goes a little further and locks at DMA timeout for hda. Here's my cpu info: processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 7 model name : Pentium III (Katmai) stepping : 3 cpu MHz : 451.033 cache size : 512 KB fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 2 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov pat pse36 mmx fxsr sse bogomips : 902.96 -- System doesn't power down under Dapper 686 https://launchpad.net/malone/bugs/39499 From fmccormick at videotron.ca Fri Apr 14 13:01:44 2006 From: fmccormick at videotron.ca (Frank McCormick) Date: Fri, 14 Apr 2006 13:01:44 -0000 Subject: [Bug 39499] Re: System doesn't power down under Dapper 686 References: <20060413211152.16443.87018.malonedeb@gandwana.ubuntu.com> Message-ID: <20060414130144.16443.621.malone@gandwana.ubuntu.com> Sorry forgot to add that the NOAPIC keyword allows the 686 kernel to boot, but with reboot=h added it locks at the point mentioned above. -- System doesn't power down under Dapper 686 https://launchpad.net/malone/bugs/39499 From martin.bergner at online.de Fri Apr 14 13:00:19 2006 From: martin.bergner at online.de (Martin Bergner) Date: Fri, 14 Apr 2006 13:00:19 -0000 Subject: [Bug 26860] Re: No sound with intel8x0 after upgrading to 2.6.12-9-686 References: <20060113145141.21012.17785.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060414130019.16492.68403.malone@gandwana.ubuntu.com> Hi, can you try to boot from the Dapper Live Flight 6 CDs and see if the problem still occurs? You can get them from http://cdimage.ubuntu.com/releases/dapper/flight-6/ -- No sound with intel8x0 after upgrading to 2.6.12-9-686 https://launchpad.net/malone/bugs/26860 From martin.bergner at online.de Fri Apr 14 13:08:53 2006 From: martin.bergner at online.de (Martin Bergner) Date: Fri, 14 Apr 2006 13:08:53 -0000 Subject: [Bug 21134] Re: Hang when loading some module References: <20060113141100.21012.14151.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060414130853.1684.52415.malone@gangotri.ubuntu.com> Hi, can you try to boot from the Dapper Live Flight 6 CDs and see if the problem still occurs? You can get them from http://cdimage.ubuntu.com/releases/dapper/flight-6/ -- Hang when loading some module https://launchpad.net/malone/bugs/21134 From martin.bergner at online.de Fri Apr 14 13:07:44 2006 From: martin.bergner at online.de (Martin Bergner) Date: Fri, 14 Apr 2006 13:07:44 -0000 Subject: [Bug 20195] Re: Laptop doesn't resume after S3 References: <20060113140553.21012.74245.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060414130745.1684.21693.malone@gangotri.ubuntu.com> Does this problem still occur for you, if yes, could you try with dapper to see if it still occurs there? ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Unconfirmed => Needs Info -- Laptop doesn't resume after S3 https://launchpad.net/malone/bugs/20195 From martin.bergner at online.de Fri Apr 14 13:14:40 2006 From: martin.bergner at online.de (Martin Bergner) Date: Fri, 14 Apr 2006 13:14:40 -0000 Subject: [Bug 21609] Re: Resume failure on ThinkPad T41 References: <20060113141348.21012.53114.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060414131440.1627.11386.malone@gangotri.ubuntu.com> Is this still an issue with the splash option in the menu.ls? Since this is the default in dapper, we better check if this bug still exists. -- Resume failure on ThinkPad T41 https://launchpad.net/malone/bugs/21609 From martin.bergner at online.de Fri Apr 14 13:10:44 2006 From: martin.bergner at online.de (Martin Bergner) Date: Fri, 14 Apr 2006 13:10:44 -0000 Subject: [Bug 21344] Re: Hang when loading ipw2100 References: <20060113141220.21012.9495.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060414131044.1684.90364.malone@gangotri.ubuntu.com> Hi, can you try to boot from the Dapper Live Flight 6 CDs and see if the problem still occurs? You can get them from http://cdimage.ubuntu.com/releases/dapper/flight-6/ -- Hang when loading ipw2100 https://launchpad.net/malone/bugs/21344 From martin.bergner at online.de Fri Apr 14 13:19:56 2006 From: martin.bergner at online.de (Martin Bergner) Date: Fri, 14 Apr 2006 13:19:56 -0000 Subject: [Bug 24590] Re: Please ship vmlinux files References: <20060113142950.21012.2282.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060414131956.16443.76534.malone@gandwana.ubuntu.com> Is there any progress on this? I mean, will this be in dapper or not? -- Please ship vmlinux files https://launchpad.net/malone/bugs/24590 From martin.bergner at online.de Fri Apr 14 13:22:45 2006 From: martin.bergner at online.de (Martin Bergner) Date: Fri, 14 Apr 2006 13:22:45 -0000 Subject: [Bug 27533] Re: Suspend References: <20060113151802.29386.81356.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060414132245.1684.5030.malone@gangotri.ubuntu.com> Hi, can you try to reproduce the issue with the latest Dapper Flight 6 Live CDs which you can get from http://cdimage.ubuntu.com/releases/dapper/flight-6/ -- Suspend https://launchpad.net/malone/bugs/27533 From martin.bergner at online.de Fri Apr 14 13:24:45 2006 From: martin.bergner at online.de (Martin Bergner) Date: Fri, 14 Apr 2006 13:24:45 -0000 Subject: [Bug 27163] Re: dapper flight 2 - Targa Traveller 826 - USB ports don't work References: <20060113145314.21012.17699.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060414132445.1684.57623.malone@gangotri.ubuntu.com> Ben, have you already forced irqpoll for this laptop so that this bug can be closed or do you need more information? -- dapper flight 2 - Targa Traveller 826 - USB ports don't work https://launchpad.net/malone/bugs/27163 From martin.bergner at online.de Fri Apr 14 13:27:55 2006 From: martin.bergner at online.de (Martin Bergner) Date: Fri, 14 Apr 2006 13:27:55 -0000 Subject: [Bug 27746] Re: Kernel oopses on IO References: <20060113151904.29386.8473.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060414132755.1684.4559.malone@gangotri.ubuntu.com> Hi, can you try with the Dapper Flight 6 Live CD which you get from here: http://cdimage.ubuntu.com/releases/dapper/flight-6/ and see if the problems still occur? -- Kernel oopses on IO https://launchpad.net/malone/bugs/27746 From arturuk at gmail.com Fri Apr 14 14:18:27 2006 From: arturuk at gmail.com (art2003) Date: Fri, 14 Apr 2006 14:18:27 -0000 Subject: [Bug 26376] Re: [Bug 26376] Re: [Bug 26376] Re: [Bug 26376] Re: SiS 7012 chip Breezy: Sound works fine but volume can only be set to mute or 100% References: <20060113144913.21012.21453.launchpad@macquarie.warthogs.hbd.com> <20060411035113.24516.36261.malone@gangotri.ubuntu.com> <1144967355.9080.78.camel@mirage> Message-ID: I have downloaded flight3 live-cd checked the md5sum and it was correct so download is good. Then burned a cd booted and can't get X up and running, probably because of a 'can't find /etc/X11/xorg.conf error' I have tried a second cd in case the first one was faulty and same result. I am not willing to do dist-upgrade until Dapper goes official. So can we live this bug as unresolved until Dapper is released and then I will upgrade my system and try again? Alternatively you are welcome to post me a working Dapper live cd and I will gladly try it. On 13/04/06, Dennis Kaarsemaker wrote: > > Can you tell me where can I download a dapper live cd? > > http://cdimage.ubuntu.com > > -- > SiS 7012 chip Breezy: Sound works fine but volume can only be set to mute or 100% > https://launchpad.net/malone/bugs/26376 > -- /---------------------------------------------- Linux user number 103022 At http://counter.li.org/ -- SiS 7012 chip Breezy: Sound works fine but volume can only be set to mute or 100% https://launchpad.net/malone/bugs/26376 From jgotangco at ubuntu.com Fri Apr 14 15:15:25 2006 From: jgotangco at ubuntu.com (Jerome S. Gotangco) Date: Fri, 14 Apr 2006 15:15:25 -0000 Subject: [Bug 29299] Laptop Mission: Tecra M2 does not reboot in Dapper References: <20060121163034.28441.92217.malonedeb@gangotri.ubuntu.com> Message-ID: <20060414151525.1627.48380.launchpad@canonical@gangotri.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: This is a Canonical-sponsored Tecra M2 (https://wiki.ubuntu.com/LaptopTestingTeam/ToshibaTecraM2). With Flight 3 and succeeding updates, the machine is not able to reboot at all. All modules ans services are unloaded and a "rebooting" notice is shown, but the screen stays blank afterwards and does not complete the reboot process. Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: This is a Canonical-sponsored Tecra M2 (https://wiki.ubuntu.com/LaptopTestingTeam/ToshibaTecraM2). With Flight 3 and succeeding updates, the machine is not able to reboot at all. All modules ans services are unloaded and a "rebooting" notice is shown, but the screen stays blank afterwards and does not complete the reboot process. -- Laptop Mission: Tecra M2 does not reboot in Dapper https://launchpad.net/malone/bugs/29299 From zulcss at gmail.com Fri Apr 14 15:15:25 2006 From: zulcss at gmail.com (ChuckShort) Date: Fri, 14 Apr 2006 15:15:25 -0000 Subject: [Bug 29299] Re: Laptop Mission: Tecra M2 does not reboot in Dapper References: <20060121163034.28441.92217.malonedeb@gangotri.ubuntu.com> Message-ID: <20060414151525.1627.15443.malone@gangotri.ubuntu.com> Have you tried using reboot=h as a boot paramater? ** Changed in: laptop-mode (Ubuntu) Sourcepackagename: laptop-mode => linux-source-2.6.15 -- Laptop Mission: Tecra M2 does not reboot in Dapper https://launchpad.net/malone/bugs/29299 From rkimber at ntlworld.com Fri Apr 14 15:29:57 2006 From: rkimber at ntlworld.com (Rkimber) Date: Fri, 14 Apr 2006 15:29:57 -0000 Subject: [Bug 39537] Kernel bug References: <20060414090804.16443.59284.malonedeb@gandwana.ubuntu.com> Message-ID: <20060414152957.16443.5073.launchpad@canonical@gandwana.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: I'm using kubuntu dapper flight 6 on a dual opteron I get the following reports:- Apr 14 01:02:03 infinity kernel: [144161.498872] Unable to handle kernel paging request at ffff810018d71f18 RIP: Apr 14 01:02:03 infinity kernel: [144161.498882] [phys_startup_64+415702552/2147483392] Apr 14 01:02:03 infinity kernel: [144161.498900] PGD 8063 PUD 9063 PMD 8000000018c001e3 PTE ffe2e2e2ffe2e2e2 Apr 14 01:02:03 infinity kernel: [144161.498909] Oops: 0011 [2] PREEMPT SMP Apr 14 01:02:03 infinity kernel: [144161.498913] CPU 1 Apr 14 01:02:03 infinity kernel: [144161.498916] Modules linked in: ext2 binfmt_misc rfcomm l2cap bluetooth ipt_limit iptable_mangle ipt_LOG ipt_MASQUERADE ip_nat ipt_TOS ipt_REJECT ip_conntrack_irc ip_conntrack_ftp ipt_state ip_conntrack nfnetlink iptable_filter ip_tables cpufreq_userspace cpufreq_stats freq_table cpufreq_powersave cpufreq_ondemand cpufreq_conservative video tc1100_wmi sony_acpi pcc_acpi hotkey dev_acpi container button acpi_sbs battery ac i2c_acpi_ec nls_iso8859_1 nls_cp437 vfat fat ipv6 dm_mod md_mod w83627hf hwmon_vid eeprom i2c_isa lp snd_seq_dummy snd_seq_oss snd_seq_midi snd_seq_midi_event snd_seq tsdev snd_via82xx rtc parport_pc parport gameport snd_ac97_codec snd_ac97_bus snd_pcm_oss snd_mixer_oss serio_raw snd_pcm psmouse snd_timer snd_page_alloc snd_mpu401_uart snd_rawmidi snd_seq_device pcspkr snd soundcore sg tg3 nvidia i2c_viapro shpchp pci_hotplug i2c_core sd_mod evdev ext3 jbd usb_storage scsi_mod ide_generic ehci_hcd uhci_hcd usbcore ide_disk via82cxxx generic ide_cd cdrom pdc202 Apr 14 01:02:03 infinity kernel: x_new thermal processor fan capability commoncap vga16fb cfbcopyarea vgastate cfbimgblt cfbfillrect fbcon tileblit font bitblit softcursor Apr 14 01:02:03 infinity kernel: [144161.498979] Pid: 15471, comm: basename Tainted: P 2.6.15-20-amd64-generic #1 Apr 14 01:02:03 infinity kernel: [144161.498983] RIP: 0010:[phys_startup_64+415702552/2147483392] [phys_startup_64+415702552/2147483392] Apr 14 01:02:03 infinity kernel: [144161.498990] RSP: 0018:ffff810018d71f28 EFLAGS: 00010292 Apr 14 01:02:03 infinity kernel: [144161.498994] RAX: 0000000000000000 RBX: ffff810014f74000 RCX: 0000000000000020 Apr 14 01:02:03 infinity kernel: [144161.498999] RDX: ffff810070422c00 RSI: ffff810001000000 RDI: ffff810070422c00 Apr 14 01:02:03 infinity kernel: [144161.499004] RBP: 0000000000602e08 R08: 00007fffffe7b839 R09: 0000000000000000 Apr 14 01:02:03 infinity kernel: [144161.499008] R10: 0000000000000000 R11: 000000000000000f R12: ffffffff801405e4 Apr 14 01:02:03 infinity kernel: [144161.499013] R13: ffff81006a54d260 R14: ffff81006a54d2c8 R15: ffff810018d71f18 Apr 14 01:02:03 infinity kernel: [144161.499018] FS: 00002aaaab0596d0(0000) GS:ffffffff80446880(0000) knlGS:0000000000000000 Apr 14 01:02:03 infinity kernel: [144161.499022] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b Apr 14 01:02:03 infinity kernel: [144161.499026] CR2: ffff810018d71f18 CR3: 00000000136ac000 CR4: 00000000000006e0 Apr 14 01:02:03 infinity kernel: [144161.499032] Process basename (pid: 15471, threadinfo ffff810018d70000, task ffff81006a54d140) Apr 14 01:02:03 infinity kernel: [144161.499035] Stack: 00002aaaaadf1248 00002aaaaadf1248 0000000000000000 0000000000000000 Apr 14 01:02:03 infinity kernel: [144161.499044] 00000000006a4388 ffffffff801102fe 0000000000000000 0000000000000000 Apr 14 01:02:03 infinity kernel: [144161.499050] 0000000000000000 0000000000000000 Apr 14 01:02:03 infinity kernel: [144161.499053] Call Trace:{stub_execve+106} Apr 14 01:02:03 infinity kernel: [144161.499092] Apr 14 01:02:03 infinity kernel: [144161.499093] Code: 18 00 00 00 00 00 00 00 18 1f d7 18 00 81 ff ff 48 12 df aa Apr 14 01:02:03 infinity kernel: [144161.499104] RIP [phys_startup_64+415702552/2147483392] RSP Apr 14 01:02:03 infinity kernel: [144161.499111] CR2: ffff810018d71f18 and ... Apr 14 05:02:05 infinity kernel: [144161.499114] <1>Unable to handle kernel paging request at ffff8100082ddf18 RIP: Apr 14 05:02:05 infinity kernel: [158551.348437] [phys_startup_64+136175128/2147483392] Apr 14 05:02:05 infinity kernel: [158551.348456] PGD 8063 PUD 9063 PMD 80000000082001e3 PTE 4b20296f6b636547 Apr 14 05:02:05 infinity kernel: [158551.348465] Oops: 0011 [3] PREEMPT SMP Apr 14 05:02:05 infinity kernel: [158551.348469] CPU 0 Apr 14 05:02:05 infinity kernel: [158551.348471] Modules linked in: ext2 binfmt_misc rfcomm l2cap bluetooth ipt_limit iptable_mangle ipt_LOG ipt_MASQUERADE ip_nat ipt_TOS ipt_REJECT ip_conntrack_irc ip_conntrack_ftp ipt_state ip_conntrack nfnetlink iptable_filter ip_tables cpufreq_userspace cpufreq_stats freq_table cpufreq_powersave cpufreq_ondemand cpufreq_conservative video tc1100_wmi sony_acpi pcc_acpi hotkey dev_acpi container button acpi_sbs battery ac i2c_acpi_ec nls_iso8859_1 nls_cp437 vfat fat ipv6 dm_mod md_mod w83627hf hwmon_vid eeprom i2c_isa lp snd_seq_dummy snd_seq_oss snd_seq_midi snd_seq_midi_event snd_seq tsdev snd_via82xx rtc parport_pc parport gameport snd_ac97_codec snd_ac97_bus snd_pcm_oss snd_mixer_oss serio_raw snd_pcm psmouse snd_timer snd_page_alloc snd_mpu401_uart snd_rawmidi snd_seq_device pcspkr snd soundcore sg tg3 nvidia i2c_viapro shpchp pci_hotplug i2c_core sd_mod evdev ext3 jbd usb_storage scsi_mod ide_generic ehci_hcd uhci_hcd usbcore ide_disk via82cxxx generic ide_cd cdrom pdc202 Apr 14 05:02:05 infinity kernel: x_new thermal processor fan capability commoncap vga16fb cfbcopyarea vgastate cfbimgblt cfbfillrect fbcon tileblit font bitblit softcursor Apr 14 05:02:05 infinity kernel: [158551.348533] Pid: 22018, comm: grep Tainted: P 2.6.15-20-amd64-generic #1 Apr 14 05:02:05 infinity kernel: [158551.348537] RIP: 0010:[phys_startup_64+136175128/2147483392] [phys_startup_64+136175128/2147483392] Apr 14 05:02:05 infinity kernel: [158551.348544] RSP: 0018:ffff8100082ddf28 EFLAGS: 00010292 Apr 14 05:02:05 infinity kernel: [158551.348548] RAX: 0000000000000000 RBX: ffff810019067000 RCX: 000000000000001d Apr 14 05:02:05 infinity kernel: [158551.348553] RDX: ffff81007fd92c00 RSI: ffff810001000000 RDI: ffff81007fd92c00 Apr 14 05:02:05 infinity kernel: [158551.348558] RBP: 0000000000600e08 R08: 00007fffff9af919 R09: 0000000000000000 Apr 14 05:02:05 infinity kernel: [158551.348562] R10: 0000000000000000 R11: 000000000000000f R12: ffffffff801405e4 Apr 14 05:02:05 infinity kernel: [158551.348567] R13: ffff81007dc4a360 R14: ffff81007dc4a3c8 R15: ffff8100082ddf18 Apr 14 05:02:05 infinity kernel: [158551.348572] FS: 00002aaaab0596d0(0000) GS:ffffffff80446800(0000) knlGS:0000000000000000 Apr 14 05:02:05 infinity kernel: [158551.348576] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b Apr 14 05:02:05 infinity kernel: [158551.348580] CR2: ffff8100082ddf18 CR3: 0000000066e3f000 CR4: 00000000000006e0 Apr 14 05:02:05 infinity kernel: [158551.348586] Process grep (pid: 22018, threadinfo ffff8100082dc000, task ffff81007dc4b000) Apr 14 05:02:05 infinity kernel: [158551.348589] Stack: 0000000000000000 00002aaaab04f248 0000000000000000 0000000000000000 Apr 14 05:02:05 infinity kernel: [158551.348596] 0000000000600688 ffffffff801102fe 0000000000000000 0000000000000000 Apr 14 05:02:05 infinity kernel: [158551.348602] 0000000000000000 0000000000000000 Apr 14 05:02:05 infinity kernel: [158551.348605] Call Trace:{stub_execve+106} Apr 14 05:02:05 infinity kernel: [158551.348644] Apr 14 05:02:05 infinity kernel: [158551.348645] Code: 18 00 00 00 00 00 00 00 18 df 2d 08 00 81 ff ff 00 00 00 00 Apr 14 05:02:05 infinity kernel: [158551.348656] RIP [phys_startup_64+136175128/2147483392] RSP Apr 14 05:02:05 infinity kernel: [158551.348663] CR2: ffff8100082ddf18 I don't know if they are the same problem or not Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: I'm using kubuntu dapper flight 6 on a dual opteron I get the following reports:- Apr 14 01:02:03 infinity kernel: [144161.498872] Unable to handle kernel paging request at ffff810018d71f18 RIP: Apr 14 01:02:03 infinity kernel: [144161.498882] [phys_startup_64+415702552/2147483392] Apr 14 01:02:03 infinity kernel: [144161.498900] PGD 8063 PUD 9063 PMD 8000000018c001e3 PTE ffe2e2e2ffe2e2e2 Apr 14 01:02:03 infinity kernel: [144161.498909] Oops: 0011 [2] PREEMPT SMP Apr 14 01:02:03 infinity kernel: [144161.498913] CPU 1 Apr 14 01:02:03 infinity kernel: [144161.498916] Modules linked in: ext2 binfmt_misc rfcomm l2cap bluetooth ipt_limit iptable_mangle ipt_LOG ipt_MASQUERADE ip_nat ipt_TOS ipt_REJECT ip_conntrack_irc ip_conntrack_ftp ipt_state ip_conntrack nfnetlink iptable_filter ip_tables cpufreq_userspace cpufreq_stats freq_table cpufreq_powersave cpufreq_ondemand cpufreq_conservative video tc1100_wmi sony_acpi pcc_acpi hotkey dev_acpi container button acpi_sbs battery ac i2c_acpi_ec nls_iso8859_1 nls_cp437 vfat fat ipv6 dm_mod md_mod w83627hf hwmon_vid eeprom i2c_isa lp snd_seq_dummy snd_seq_oss snd_seq_midi snd_seq_midi_event snd_seq tsdev snd_via82xx rtc parport_pc parport gameport snd_ac97_codec snd_ac97_bus snd_pcm_oss snd_mixer_oss serio_raw snd_pcm psmouse snd_timer snd_page_alloc snd_mpu401_uart snd_rawmidi snd_seq_device pcspkr snd soundcore sg tg3 nvidia i2c_viapro shpchp pci_hotplug i2c_core sd_mod evdev ext3 jbd usb_storage scsi_mod ide_generic ehci_hcd uhci_hcd usbcore ide_disk via82cxxx generic ide_cd cdrom pdc202 Apr 14 01:02:03 infinity kernel: x_new thermal processor fan capability commoncap vga16fb cfbcopyarea vgastate cfbimgblt cfbfillrect fbcon tileblit font bitblit softcursor Apr 14 01:02:03 infinity kernel: [144161.498979] Pid: 15471, comm: basename Tainted: P 2.6.15-20-amd64-generic #1 Apr 14 01:02:03 infinity kernel: [144161.498983] RIP: 0010:[phys_startup_64+415702552/2147483392] [phys_startup_64+415702552/2147483392] Apr 14 01:02:03 infinity kernel: [144161.498990] RSP: 0018:ffff810018d71f28 EFLAGS: 00010292 Apr 14 01:02:03 infinity kernel: [144161.498994] RAX: 0000000000000000 RBX: ffff810014f74000 RCX: 0000000000000020 Apr 14 01:02:03 infinity kernel: [144161.498999] RDX: ffff810070422c00 RSI: ffff810001000000 RDI: ffff810070422c00 Apr 14 01:02:03 infinity kernel: [144161.499004] RBP: 0000000000602e08 R08: 00007fffffe7b839 R09: 0000000000000000 Apr 14 01:02:03 infinity kernel: [144161.499008] R10: 0000000000000000 R11: 000000000000000f R12: ffffffff801405e4 Apr 14 01:02:03 infinity kernel: [144161.499013] R13: ffff81006a54d260 R14: ffff81006a54d2c8 R15: ffff810018d71f18 Apr 14 01:02:03 infinity kernel: [144161.499018] FS: 00002aaaab0596d0(0000) GS:ffffffff80446880(0000) knlGS:0000000000000000 Apr 14 01:02:03 infinity kernel: [144161.499022] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b Apr 14 01:02:03 infinity kernel: [144161.499026] CR2: ffff810018d71f18 CR3: 00000000136ac000 CR4: 00000000000006e0 Apr 14 01:02:03 infinity kernel: [144161.499032] Process basename (pid: 15471, threadinfo ffff810018d70000, task ffff81006a54d140) Apr 14 01:02:03 infinity kernel: [144161.499035] Stack: 00002aaaaadf1248 00002aaaaadf1248 0000000000000000 0000000000000000 Apr 14 01:02:03 infinity kernel: [144161.499044] 00000000006a4388 ffffffff801102fe 0000000000000000 0000000000000000 Apr 14 01:02:03 infinity kernel: [144161.499050] 0000000000000000 0000000000000000 Apr 14 01:02:03 infinity kernel: [144161.499053] Call Trace:{stub_execve+106} Apr 14 01:02:03 infinity kernel: [144161.499092] Apr 14 01:02:03 infinity kernel: [144161.499093] Code: 18 00 00 00 00 00 00 00 18 1f d7 18 00 81 ff ff 48 12 df aa Apr 14 01:02:03 infinity kernel: [144161.499104] RIP [phys_startup_64+415702552/2147483392] RSP Apr 14 01:02:03 infinity kernel: [144161.499111] CR2: ffff810018d71f18 and ... Apr 14 05:02:05 infinity kernel: [144161.499114] <1>Unable to handle kernel paging request at ffff8100082ddf18 RIP: Apr 14 05:02:05 infinity kernel: [158551.348437] [phys_startup_64+136175128/2147483392] Apr 14 05:02:05 infinity kernel: [158551.348456] PGD 8063 PUD 9063 PMD 80000000082001e3 PTE 4b20296f6b636547 Apr 14 05:02:05 infinity kernel: [158551.348465] Oops: 0011 [3] PREEMPT SMP Apr 14 05:02:05 infinity kernel: [158551.348469] CPU 0 Apr 14 05:02:05 infinity kernel: [158551.348471] Modules linked in: ext2 binfmt_misc rfcomm l2cap bluetooth ipt_limit iptable_mangle ipt_LOG ipt_MASQUERADE ip_nat ipt_TOS ipt_REJECT ip_conntrack_irc ip_conntrack_ftp ipt_state ip_conntrack nfnetlink iptable_filter ip_tables cpufreq_userspace cpufreq_stats freq_table cpufreq_powersave cpufreq_ondemand cpufreq_conservative video tc1100_wmi sony_acpi pcc_acpi hotkey dev_acpi container button acpi_sbs battery ac i2c_acpi_ec nls_iso8859_1 nls_cp437 vfat fat ipv6 dm_mod md_mod w83627hf hwmon_vid eeprom i2c_isa lp snd_seq_dummy snd_seq_oss snd_seq_midi snd_seq_midi_event snd_seq tsdev snd_via82xx rtc parport_pc parport gameport snd_ac97_codec snd_ac97_bus snd_pcm_oss snd_mixer_oss serio_raw snd_pcm psmouse snd_timer snd_page_alloc snd_mpu401_uart snd_rawmidi snd_seq_device pcspkr snd soundcore sg tg3 nvidia i2c_viapro shpchp pci_hotplug i2c_core sd_mod evdev ext3 jbd usb_storage scsi_mod ide_generic ehci_hcd uhci_hcd usbcore ide_disk via82cxxx generic ide_cd cdrom pdc202 Apr 14 05:02:05 infinity kernel: x_new thermal processor fan capability commoncap vga16fb cfbcopyarea vgastate cfbimgblt cfbfillrect fbcon tileblit font bitblit softcursor Apr 14 05:02:05 infinity kernel: [158551.348533] Pid: 22018, comm: grep Tainted: P 2.6.15-20-amd64-generic #1 Apr 14 05:02:05 infinity kernel: [158551.348537] RIP: 0010:[phys_startup_64+136175128/2147483392] [phys_startup_64+136175128/2147483392] Apr 14 05:02:05 infinity kernel: [158551.348544] RSP: 0018:ffff8100082ddf28 EFLAGS: 00010292 Apr 14 05:02:05 infinity kernel: [158551.348548] RAX: 0000000000000000 RBX: ffff810019067000 RCX: 000000000000001d Apr 14 05:02:05 infinity kernel: [158551.348553] RDX: ffff81007fd92c00 RSI: ffff810001000000 RDI: ffff81007fd92c00 Apr 14 05:02:05 infinity kernel: [158551.348558] RBP: 0000000000600e08 R08: 00007fffff9af919 R09: 0000000000000000 Apr 14 05:02:05 infinity kernel: [158551.348562] R10: 0000000000000000 R11: 000000000000000f R12: ffffffff801405e4 Apr 14 05:02:05 infinity kernel: [158551.348567] R13: ffff81007dc4a360 R14: ffff81007dc4a3c8 R15: ffff8100082ddf18 Apr 14 05:02:05 infinity kernel: [158551.348572] FS: 00002aaaab0596d0(0000) GS:ffffffff80446800(0000) knlGS:0000000000000000 Apr 14 05:02:05 infinity kernel: [158551.348576] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b Apr 14 05:02:05 infinity kernel: [158551.348580] CR2: ffff8100082ddf18 CR3: 0000000066e3f000 CR4: 00000000000006e0 Apr 14 05:02:05 infinity kernel: [158551.348586] Process grep (pid: 22018, threadinfo ffff8100082dc000, task ffff81007dc4b000) Apr 14 05:02:05 infinity kernel: [158551.348589] Stack: 0000000000000000 00002aaaab04f248 0000000000000000 0000000000000000 Apr 14 05:02:05 infinity kernel: [158551.348596] 0000000000600688 ffffffff801102fe 0000000000000000 0000000000000000 Apr 14 05:02:05 infinity kernel: [158551.348602] 0000000000000000 0000000000000000 Apr 14 05:02:05 infinity kernel: [158551.348605] Call Trace:{stub_execve+106} Apr 14 05:02:05 infinity kernel: [158551.348644] Apr 14 05:02:05 infinity kernel: [158551.348645] Code: 18 00 00 00 00 00 00 00 18 df 2d 08 00 81 ff ff 00 00 00 00 Apr 14 05:02:05 infinity kernel: [158551.348656] RIP [phys_startup_64+136175128/2147483392] RSP Apr 14 05:02:05 infinity kernel: [158551.348663] CR2: ffff8100082ddf18 I don't know if they are the same problem or not -- Kernel bug https://launchpad.net/malone/bugs/39537 From robitaille at gmail.com Fri Apr 14 15:29:56 2006 From: robitaille at gmail.com (Daniel Robitaille) Date: Fri, 14 Apr 2006 15:29:56 -0000 Subject: [Bug 39537] Re: Kernel bug References: <20060414090804.16443.59284.malonedeb@gandwana.ubuntu.com> Message-ID: <20060414152956.16443.13727.launchpad@gandwana.ubuntu.com> ** Changed in: Ubuntu Sourcepackagename: None => linux-source-2.6.15 -- Kernel bug https://launchpad.net/malone/bugs/39537 From cecolmena at yahoo.com Fri Apr 14 15:53:01 2006 From: cecolmena at yahoo.com (Carlos) Date: Fri, 14 Apr 2006 15:53:01 -0000 Subject: [Bug 26703] Re: ACX Drivers -- needs updating. References: <20060113145051.21012.52657.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060414155301.1627.57246.malone@gangotri.ubuntu.com> I have the same issue with the Hawking HWP54G. The default firmware is wrong so linking to 1.2.1.34 fixes it. -- ACX Drivers -- needs updating. https://launchpad.net/malone/bugs/26703 From lauri.rantakari at gmail.com Fri Apr 14 16:20:22 2006 From: lauri.rantakari at gmail.com (Lauri Rantakari) Date: Fri, 14 Apr 2006 16:20:22 -0000 Subject: [Bug 17125] Re: Little acpi event windows pop up in KDE References: <20060113134955.21012.33484.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060414162022.1684.94342.malone@gangotri.ubuntu.com> I got this bug too. Using Asus A6R Laptop (celeron m 380, 512, ati x200m) and Dapper Flight 6 Kubuntu with the latest updates, kernel is 2.6.15-20 It seems though that I only get the error reading LCD status, not the brightness one. Also the only report that flashes on the screen is LCD status on, LCD status off. ** Attachment added: "another lspci and dmidecode output" http://librarian.launchpad.net/2120415/lcdoffon.txt -- Little acpi event windows pop up in KDE https://launchpad.net/malone/bugs/17125 From casualprogrammer at yahoo.com Fri Apr 14 16:30:25 2006 From: casualprogrammer at yahoo.com (casualprogrammer) Date: Fri, 14 Apr 2006 16:30:25 -0000 Subject: [Bug 39411] Wrong Kernel installed ( 386 instead of 686 ) References: <20060413091327.3651.67176.malonedeb@gangotri.ubuntu.com> Message-ID: <20060414163025.16443.29972.launchpad@canonical@gandwana.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: Althoug cat /proc/cpuinfo shows I am using a Pentium III Ubuntu 6.06 flight 6 is installing a 386 Kernel, unlike other distributions i.e. Debian. Also the 686 Kernel for Dapper is offered ONLY with SMP support enabled, which causes a lot of drivers to crash the system. cjp at WORKSTATION3U:~$ cat /proc/cpuinfo processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 11 model name : Intel(R) Pentium(R) III Mobile CPU 800MHz stepping : 1 cpu MHz : 497.013 cache size : 512 KB fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 2 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov pat pse36 mmx fxsr sse bogomips : 994.27 Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: Althoug cat /proc/cpuinfo shows I am using a Pentium III Ubuntu 6.06 flight 6 is installing a 386 Kernel, unlike other distributions i.e. Debian. Also the 686 Kernel for Dapper is offered ONLY with SMP support enabled, which causes a lot of drivers to crash the system. cjp at WORKSTATION3U:~$ cat /proc/cpuinfo processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 11 model name : Intel(R) Pentium(R) III Mobile CPU 800MHz stepping : 1 cpu MHz : 497.013 cache size : 512 KB fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 2 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov pat pse36 mmx fxsr sse bogomips : 994.27 -- Wrong Kernel installed ( 386 instead of 686 ) https://launchpad.net/malone/bugs/39411 From robitaille at gmail.com Fri Apr 14 16:27:40 2006 From: robitaille at gmail.com (Daniel Robitaille) Date: Fri, 14 Apr 2006 16:27:40 -0000 Subject: [Bug 39411] Re: Wrong Kernel installed ( 386 instead of 686 ) References: <20060413091327.3651.67176.malonedeb@gangotri.ubuntu.com> Message-ID: <20060414162740.1627.20161.malone@gangotri.ubuntu.com> This is not a bug but a deliberate decision by Ubuntu developpers to only install the 386 kernel on this type of computer architecture. Please see bug 17772 for more details about this. ** Changed in: Ubuntu Sourcepackagename: None => linux-source-2.6.15 -- Wrong Kernel installed ( 386 instead of 686 ) https://launchpad.net/malone/bugs/39411 From jhorey at gmail.com Fri Apr 14 17:09:00 2006 From: jhorey at gmail.com (jhorey) Date: Fri, 14 Apr 2006 17:09:00 -0000 Subject: [Bug 39578] cannot load conservative or ondemand governor References: <20060414170900.1684.80746.malonedeb@gangotri.ubuntu.com> Message-ID: <20060414170900.1684.80746.malonedeb@gangotri.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 linux-image-2.6.15-20-powerpc (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: I am running Dapper (Flight 6) on a PowerBook (G4, 15", 1.5 ghz) with the latest kernel. First I modprobe "cpufreq_conservative" and "cpufreq_ondemand" and then attempt, echo conservative > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor and receive an error: bash: echo: write error: Invalid argument This is also true when I try to switch to the ondemand governor. Both governors (conservative and ondemand) show up in the scaling_available_governors. Also, I can load the performance and powersave governors just fine. -- cannot load conservative or ondemand governor https://launchpad.net/malone/bugs/39578 From eric at janssuhhh.com Fri Apr 14 17:24:32 2006 From: eric at janssuhhh.com (ER!C) Date: Fri, 14 Apr 2006 17:24:32 -0000 Subject: [Bug 39581] SoundBlaster Live! 24-bit recognized as SB AudigyLS References: <20060414172432.1627.50192.malonedeb@gangotri.ubuntu.com> Message-ID: <20060414172432.1627.50192.malonedeb@gangotri.ubuntu.com> Public bug reported: Affects: linux-meta linux-image-386 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: Its not being recognized properly, but it also doesn't work. I can't get sound out of it. lspci | grep Multimedia gives: 0000:00:05.0 Multimedia audio controller: Creative Labs SB Audigy LS 0000:00:06.0 Multimedia controller: Philips Semiconductors SAA7134 (rev 01) 0000:00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 60) lsmod | grep snd gives: snd_via82xx 25248 4 snd_ac97_codec 64608 1 snd_via82xx snd_pcm_oss 47652 2 snd_mixer_oss 16768 3 snd_pcm_oss snd_pcm 84872 3 snd_via82xx,snd_ac97_codec,snd_pcm_oss snd_timer 23300 1 snd_pcm snd_page_alloc 9604 2 snd_via82xx,snd_pcm gameport 4608 1 snd_via82xx snd_mpu401_uart 7168 1 snd_via82xx snd_rawmidi 22944 1 snd_mpu401_uart snd_seq_device 8332 1 snd_rawmidi snd 50276 9 snd_via82xx,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer,snd_mpu401_uart,snd_rawmidi,snd_seq_device soundcore 9824 6 snd,saa7134 Using Breezy Badger. ** Description changed: + Its not being recognized properly, but it also doesn't work. + I can't get sound out of it. + lspci | grep Multimedia gives: 0000:00:05.0 Multimedia audio controller: Creative Labs SB Audigy LS 0000:00:06.0 Multimedia controller: Philips Semiconductors SAA7134 (rev 01) 0000:00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 60) lsmod | grep snd gives: snd_via82xx 25248 4 snd_ac97_codec 64608 1 snd_via82xx snd_pcm_oss 47652 2 snd_mixer_oss 16768 3 snd_pcm_oss snd_pcm 84872 3 snd_via82xx,snd_ac97_codec,snd_pcm_oss snd_timer 23300 1 snd_pcm snd_page_alloc 9604 2 snd_via82xx,snd_pcm gameport 4608 1 snd_via82xx snd_mpu401_uart 7168 1 snd_via82xx snd_rawmidi 22944 1 snd_mpu401_uart snd_seq_device 8332 1 snd_rawmidi snd 50276 9 snd_via82xx,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer,snd_mpu401_uart,snd_rawmidi,snd_seq_device soundcore 9824 6 snd,saa7134 Using Breezy Badger. -- SoundBlaster Live! 24-bit recognized as SB AudigyLS https://launchpad.net/malone/bugs/39581 From pmjdebruijn at gmail.com Fri Apr 14 17:34:16 2006 From: pmjdebruijn at gmail.com (Pascal de Bruijn) Date: Fri, 14 Apr 2006 17:34:16 -0000 Subject: [Bug 39581] Re: SoundBlaster Live! 24-bit recognized as SB AudigyLS References: <20060414172432.1627.50192.malonedeb@gangotri.ubuntu.com> Message-ID: <20060414173416.1684.87887.malone@gangotri.ubuntu.com> That card should work using the snd-ca0106 driver, which is available on Dapper. pmjdebruijn at agamemnon:/usr/lib$ cd /lib/modules/ pmjdebruijn at agamemnon:/lib/modules$ find | grep ca0106 ./2.6.15-19-386/kernel/sound/pci/ca0106 ./2.6.15-19-386/kernel/sound/pci/ca0106/snd-ca0106.ko ./2.6.15-20-386/kernel/sound/pci/ca0106 ./2.6.15-20-386/kernel/sound/pci/ca0106/snd-ca0106.ko ./2.6.15-20-k7/kernel/sound/pci/ca0106 ./2.6.15-20-k7/kernel/sound/pci/ca0106/snd-ca0106.ko pmjdebruijn at agamemnon:/lib/modules$ You could possible try the LiveCD and see whether it works there... -- SoundBlaster Live! 24-bit recognized as SB AudigyLS https://launchpad.net/malone/bugs/39581 From correia at brutele.be Fri Apr 14 17:35:36 2006 From: correia at brutele.be (Antonio Ricardo Soares da Silva Correia) Date: Fri, 14 Apr 2006 17:35:36 -0000 Subject: [Bug 24533] Re: [Bug 24533] Re: Fail to boot smp kernel References: <20060113142932.21012.10689.launchpad@macquarie.warthogs.hbd.com> <20060414082401.1684.20051.malone@gangotri.ubuntu.com> Message-ID: <200604141935.37143.correia@brutele.be> Since Hoary till Breezy that I'm still using I've tried with every single kernel up to the last one. I have Dapper installed on another partition for some time but I couldn't find in the repositories the smp version of the kernel. My system is up to date and every time a new kernel pops up I try the new smp version to see if it works but it still doesn't. The machine still freezes in X (the gray screen before KDE's login screen appears). I don't remember if I mentioned I have a Pentium with hyperthreading. Anyhow, it boots fine in smp mode both with Mandriva and a Knopix live CD so I figure the problem is not the machine... If you need me to try again and if there is a log file I can send you back to help track the problem I'll do it willingly. Best regards, Antonio Le Vendredi 14 Avril 2006 10:24, Daniel Robitaille a écrit : > Antonio, Have you tried this with a more recent Dapper kernel? > > > ** Changed in: Ubuntu > Sourcepackagename: None => linux-source-2.6.15 -- Fail to boot smp kernel https://launchpad.net/malone/bugs/24533 From mdz at ubuntu.com Fri Apr 14 17:40:08 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Fri, 14 Apr 2006 17:40:08 -0000 Subject: [Bug 38555] Re: usb mouse not properly initialized References: <20060407072834.24486.931.malonedeb@gangotri.ubuntu.com> Message-ID: <20060414174009.16492.99122.launchpad@gandwana.ubuntu.com> ** Bug 37059 has been marked a duplicate of this bug -- usb mouse not properly initialized https://launchpad.net/malone/bugs/38555 From mdz at ubuntu.com Fri Apr 14 17:40:08 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Fri, 14 Apr 2006 17:40:08 -0000 Subject: [Bug 37059] Re: Mouse doesn't always work at gnome start-up References: <20060328194050.7313.28081.malonedeb@gangotri.ubuntu.com> Message-ID: <20060414174009.16492.45294.launchpad@gandwana.ubuntu.com> *** This bug is a duplicate of bug 38555 *** ** This bug has been marked a duplicate of bug 38555 usb mouse not properly initialized -- Mouse doesn't always work at gnome start-up https://launchpad.net/malone/bugs/37059 From mail at carthik.net Fri Apr 14 17:57:16 2006 From: mail at carthik.net (Carthik Sharma) Date: Fri, 14 Apr 2006 17:57:16 -0000 Subject: [Bug 26376] Re: SiS 7012 chip Breezy: Sound works fine but volume can only be set to mute or 100% References: <20060113144913.21012.21453.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060414175716.1684.47883.malone@gangotri.ubuntu.com> Art2003, We sure can wait till you dist-upgrade to Dapper later. Please let us know how it goes then. Thanks. -- SiS 7012 chip Breezy: Sound works fine but volume can only be set to mute or 100% https://launchpad.net/malone/bugs/26376 From mdz at ubuntu.com Fri Apr 14 18:15:08 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Fri, 14 Apr 2006 18:15:08 -0000 Subject: [Bug 32123] Re: Cannot find ide hard disk on boot References: <20060220130413.1427.33476.malonedeb@gangotri.ubuntu.com> Message-ID: <20060414181508.16492.51928.malone@gandwana.ubuntu.com> We need for someone to save a copy of their broken initramfs when this happens, in order to analyze and fix the problem. ** Changed in: initramfs-tools (Ubuntu) Assignee: (unassigned) => Adam Conrad Status: Confirmed => Needs Info -- Cannot find ide hard disk on boot https://launchpad.net/malone/bugs/32123 From gnucoder at syscraft.net Fri Apr 14 19:12:55 2006 From: gnucoder at syscraft.net (Mohammed) Date: Fri, 14 Apr 2006 19:12:55 -0000 Subject: [Bug 37472] Re: the keyboard don't work perfectly on laptops acer travelmate 2300 series with Dapper References: <20060331122206.23707.692.malonedeb@gandwana.ubuntu.com> Message-ID: <20060414191255.1684.33553.malone@gangotri.ubuntu.com> Hello, I have an acer travelmate 2300 and i've also the same problem (just with dapper darke), the problem worsens whene I lanche adesklets... the keyboard and the touche pad become crazy ... nb: ACPI support works fine. -- the keyboard don't work perfectly on laptops acer travelmate 2300 series with Dapper https://launchpad.net/malone/bugs/37472 From mail at carthik.net Fri Apr 14 19:14:18 2006 From: mail at carthik.net (Carthik Sharma) Date: Fri, 14 Apr 2006 19:14:18 -0000 Subject: [Bug 24604] Re: Unable to load the system description tables References: <20060113142954.21012.78614.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060414191418.1627.76915.malone@gangotri.ubuntu.com> Thank you for reporting this bug and following up on it. I am marking this bug Closed since there has been no response from you for over three months. We would like to fix all existing issues, but need feedback to help with debugging. Should you still have a problem with the latest up to date Dapper kernel and packages, please reopen this bug. In this case, please answer the questions that have already been asked of you before and provide the log files and information required for debugging. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Needs Info => Rejected -- Unable to load the system description tables https://launchpad.net/malone/bugs/24604 From mail at carthik.net Fri Apr 14 19:13:22 2006 From: mail at carthik.net (Carthik Sharma) Date: Fri, 14 Apr 2006 19:13:22 -0000 Subject: [Bug 24601] Re: USB storage, transferring files does not work (file listing works) References: <20060113142953.21012.36343.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060414191322.16443.82882.malone@gandwana.ubuntu.com> Thank you for reporting this bug and following up on it. I am marking this bug Closed since there has been no response from you for over three months. We would like to fix all existing issues, but need need feedback to help with debugging. Should you still have a problem with the latest up to date Dapper kernel and packages, please reopen this bug. In this case, please answer the questions that have already been asked of you before and provide the log files and information required for debugging. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Needs Info => Rejected -- USB storage, transferring files does not work (file listing works) https://launchpad.net/malone/bugs/24601 From mail at carthik.net Fri Apr 14 19:19:29 2006 From: mail at carthik.net (Carthik Sharma) Date: Fri, 14 Apr 2006 19:19:29 -0000 Subject: [Bug 25951] Re: Live CD and Install CD both hang "Disabling IRQ 14" References: <20060113144708.21012.45412.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060414191929.16492.87775.malone@gandwana.ubuntu.com> Thank you for reporting this bug and following up on it. I am marking this bug Closed since there has been no response from you for over three months. We would like to fix all existing issues, but need feedback to help with debugging. Should you still have a problem with the latest up to date Dapper kernel and packages, please reopen this bug. In this case, please answer the questions that have already been asked of you before and provide the log files and information required for debugging. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Needs Info => Rejected -- Live CD and Install CD both hang "Disabling IRQ 14" https://launchpad.net/malone/bugs/25951 From mail at carthik.net Fri Apr 14 19:18:45 2006 From: mail at carthik.net (Carthik Sharma) Date: Fri, 14 Apr 2006 19:18:45 -0000 Subject: [Bug 25928] Re: System frezee ejecting CD-ROM References: <20060113144701.21012.10583.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060414191845.16443.20444.malone@gandwana.ubuntu.com> Thank you for reporting this bug and following up on it. I am marking this bug Closed since there has been no response from you for over three months. We would like to fix all existing issues, but need feedback to help with debugging. Should you still have a problem with the latest up to date Dapper kernel and packages, please reopen this bug. In this case, please answer the questions that have already been asked of you before and provide the log files and information required for debugging. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Needs Info => Rejected -- System frezee ejecting CD-ROM https://launchpad.net/malone/bugs/25928 From mail at carthik.net Fri Apr 14 19:15:10 2006 From: mail at carthik.net (Carthik Sharma) Date: Fri, 14 Apr 2006 19:15:10 -0000 Subject: [Bug 24776] Re: ipw2100 error Fatal interrupt. Scheduling firmware restart. References: <20060113143045.21012.26338.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060414191510.1684.93012.malone@gangotri.ubuntu.com> Thank you for reporting this bug and following up on it. I am marking this bug Closed since there has been no response from you for over three months. We would like to fix all existing issues, but need feedback to help with debugging. Should you still have a problem with the latest up to date Dapper kernel and packages, please reopen this bug. In this case, please answer the questions that have already been asked of you before and provide the log files and information required for debugging. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Needs Info => Rejected -- ipw2100 error Fatal interrupt. Scheduling firmware restart. https://launchpad.net/malone/bugs/24776 From mail at carthik.net Fri Apr 14 19:18:04 2006 From: mail at carthik.net (Carthik Sharma) Date: Fri, 14 Apr 2006 19:18:04 -0000 Subject: [Bug 25811] Re: Partition table unreadable after standby References: <20060113144624.21012.43988.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060414191804.1684.93934.malone@gangotri.ubuntu.com> Thank you for reporting this bug and following up on it. I am marking this bug Closed since there has been no response from you for over three months. We would like to fix all existing issues, but need feedback to help with debugging. Should you still have a problem with the latest up to date Dapper kernel and packages, please reopen this bug. In this case, please answer the questions that have already been asked of you before and provide the log files and information required for debugging. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Needs Info => Rejected -- Partition table unreadable after standby https://launchpad.net/malone/bugs/25811 From mail at carthik.net Fri Apr 14 19:22:31 2006 From: mail at carthik.net (Carthik Sharma) Date: Fri, 14 Apr 2006 19:22:31 -0000 Subject: [Bug 26365] Re: Problem to sync or copy files with Ipod References: <20060113144911.21012.1421.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060414192231.1684.87441.malone@gangotri.ubuntu.com> Hello Baptiste, Does this issue still occur with the latest Dapper kernel? If not, please let us know so we can close this bug. Thank you. -- Problem to sync or copy files with Ipod https://launchpad.net/malone/bugs/26365 From mail at carthik.net Fri Apr 14 19:20:56 2006 From: mail at carthik.net (Carthik Sharma) Date: Fri, 14 Apr 2006 19:20:56 -0000 Subject: [Bug 26304] Re: Acer TravelMate 292 sleeps but doesn't wake up References: <20060113144852.21012.33973.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060414192056.1627.66883.malone@gangotri.ubuntu.com> Thank you for reporting this bug and following up on it. I am marking this bug Closed since there has been no response from you for over three months. We would like to fix all existing issues, but need feedback to help with debugging. Should you still have a problem with the latest up to date Dapper kernel and packages, please reopen this bug. In this case, please answer the questions that have already been asked of you before and provide the log files and information required for debugging. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Needs Info => Rejected -- Acer TravelMate 292 sleeps but doesn't wake up https://launchpad.net/malone/bugs/26304 From mail at carthik.net Fri Apr 14 19:20:14 2006 From: mail at carthik.net (Carthik Sharma) Date: Fri, 14 Apr 2006 19:20:14 -0000 Subject: [Bug 26255] Re: atkbd: Spurious unknown key codes from Microsoft Natural keyboard References: <20060113144839.21012.25036.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060414192014.16443.26240.malone@gandwana.ubuntu.com> Thank you for reporting this bug and following up on it. I am marking this bug Closed since there has been no response from you for over three months. We would like to fix all existing issues, but need feedback to help with debugging. Should you still have a problem with the latest up to date Dapper kernel and packages, please reopen this bug. In this case, please answer the questions that have already been asked of you before and provide the log files and information required for debugging. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Needs Info => Rejected -- atkbd: Spurious unknown key codes from Microsoft Natural keyboard https://launchpad.net/malone/bugs/26255 From mail at carthik.net Fri Apr 14 19:29:05 2006 From: mail at carthik.net (Carthik Sharma) Date: Fri, 14 Apr 2006 19:29:05 -0000 Subject: [Bug 25548] Re: Breezy sometimes does not manage to reboot References: <20060113143421.21012.59658.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060414192906.1627.59890.malone@gangotri.ubuntu.com> Thank you for reporting this bug and following up on it. I am marking this bug Closed since there has been no response from you for over three months. We would like to fix all existing issues, but need feedback to help with debugging. Should you still have a problem with the latest up to date Dapper kernel and packages, please reopen this bug. In this case, please answer the questions that have already been asked of you before and provide the log files and information required for debugging. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Needs Info => Rejected -- Breezy sometimes does not manage to reboot https://launchpad.net/malone/bugs/25548 From mail at carthik.net Fri Apr 14 19:28:35 2006 From: mail at carthik.net (Carthik Sharma) Date: Fri, 14 Apr 2006 19:28:35 -0000 Subject: [Bug 25511] Re: dist-upgrade from hoary to breezy caused pesky IRQ problems References: <20060113143410.21012.61880.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060414192835.1684.18495.malone@gangotri.ubuntu.com> Thank you for reporting this bug and following up on it. I am marking this bug Closed since there has been no response from you for over three months. We would like to fix all existing issues, but need feedback to help with debugging. Should you still have a problem with the latest up to date Dapper kernel and packages, please reopen this bug. In this case, please answer the questions that have already been asked of you before and provide the log files and information required for debugging. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Needs Info => Rejected -- dist-upgrade from hoary to breezy caused pesky IRQ problems https://launchpad.net/malone/bugs/25511 From rayw at kdsi.net Fri Apr 14 19:36:19 2006 From: rayw at kdsi.net (kchiefs) Date: Fri, 14 Apr 2006 19:36:19 -0000 Subject: [Bug 39572] Detecting Network card during install. Dapper Flight 6 References: <20060414152316.16443.26974.malonedeb@gandwana.ubuntu.com> Message-ID: <20060414193619.16443.47123.launchpad@canonical@gandwana.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: Panasonic ToughBook CF-51 Durring Dapper Flight 6 install it only reconized my wireless card. After turning off wireless in Bios then the LAN card could NOT be found. It's a Marvell Yukon adapter. I installed without networking then went into the GUI and configured networking statically. If I attempt to get an address via DHCP my whole PC locks up and I must power cycle. Did NOT experience the same issue with Breezy. Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: Panasonic ToughBook CF-51 Durring Dapper Flight 6 install it only reconized my wireless card. After turning off wireless in Bios then the LAN card could NOT be found. It's a Marvell Yukon adapter. I installed without networking then went into the GUI and configured networking statically. If I attempt to get an address via DHCP my whole PC locks up and I must power cycle. Did NOT experience the same issue with Breezy. -- Detecting Network card during install. Dapper Flight 6 https://launchpad.net/malone/bugs/39572 From mdz at ubuntu.com Fri Apr 14 19:45:16 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Fri, 14 Apr 2006 19:45:16 -0000 Subject: [Bug 30848] Re: Korean/latin key(Hangul key) doesn't work. References: <20060208164242.11100.37112.malonedeb@gandwana.ubuntu.com> Message-ID: <20060414194516.1627.7364.malone@gangotri.ubuntu.com> Can anyone confirm whether there is still a problem in Dapper, and if so, whether the kernel still needs a patch? Matthew, wasn't this X patch an intentional effort to fix another bug, which will now have regressed? ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Confirmed => Needs Info -- Korean/latin key(Hangul key) doesn't work. https://launchpad.net/malone/bugs/30848 From mail at carthik.net Fri Apr 14 19:47:48 2006 From: mail at carthik.net (Carthik Sharma) Date: Fri, 14 Apr 2006 19:47:48 -0000 Subject: [Bug 26575] Re: Hangs on USB printer module loading References: <20060113145012.21012.23847.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060414194749.1627.19070.malone@gangotri.ubuntu.com> Thank you for reporting this bug and following up on it. I am marking this bug Closed since there has been no response from you for over three months. We would like to fix all existing issues, but need feedback to help with debugging. Should you still have a problem with the latest up to date Dapper kernel and packages, please reopen this bug. In this case, please answer the questions that have already been asked of you before and provide the log files and information required for debugging. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Needs Info => Rejected -- Hangs on USB printer module loading https://launchpad.net/malone/bugs/26575 From plush at optonline.net Fri Apr 14 19:33:54 2006 From: plush at optonline.net (plush) Date: Fri, 14 Apr 2006 19:33:54 -0000 Subject: [Bug 38912] Re: Broadcom Woes with +1 GB of RAM References: <20060409182146.32313.33245.malonedeb@gandwana.ubuntu.com> Message-ID: <20060414193354.16492.82967.malone@gandwana.ubuntu.com> *** This bug is a duplicate of bug 33024 *** This is no dup, the other bug was reported with the linux-source-2.6.15-i386, and reported as having been "fixed". This bug is with the powerpc64 kernel. -- Broadcom Woes with +1 GB of RAM https://launchpad.net/malone/bugs/38912 From plush at optonline.net Fri Apr 14 19:36:19 2006 From: plush at optonline.net (plush) Date: Fri, 14 Apr 2006 19:36:19 -0000 Subject: [Bug 38912] Re: Broadcom Woes with +1 GB of RAM References: <20060409182146.32313.33245.malonedeb@gandwana.ubuntu.com> Message-ID: <20060414193619.1684.61384.malone@gangotri.ubuntu.com> *** This bug is a duplicate of bug 33024 *** This is no dup, the other bug was reported with the linux-source-2.6.15-i386, and reported as having been "fixed". This bug is with the latest ubuntu powerpc64 kernel. Several others have confirmed it as well on their powerpc's with the latest distro. ** Changed in: Ubuntu Status: Unconfirmed => Confirmed -- Broadcom Woes with +1 GB of RAM https://launchpad.net/malone/bugs/38912 From plush at optonline.net Fri Apr 14 19:32:36 2006 From: plush at optonline.net (plush) Date: Fri, 14 Apr 2006 19:32:36 -0000 Subject: [Bug 38912] Re: Broadcom Woes with +1 GB of RAM References: <20060409182146.32313.33245.malonedeb@gandwana.ubuntu.com> Message-ID: <20060414193236.16443.75857.malone@gandwana.ubuntu.com> *** This bug is a duplicate of bug 33024 *** This is no dup, the other bug was reported with the linux-source-2.6.15-i386, and reported as having been "fixed". This bug is with the powerpc64 kernel. -- Broadcom Woes with +1 GB of RAM https://launchpad.net/malone/bugs/38912 From mdz at ubuntu.com Fri Apr 14 19:40:59 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Fri, 14 Apr 2006 19:40:59 -0000 Subject: [Bug 29767] Re: IBM Thinkpad X41 suspend to disk unsatisfactory regression References: <20060126124346.26274.53643.malonedeb@gangotri.ubuntu.com> Message-ID: <20060414194059.16492.80626.malone@gandwana.ubuntu.com> Please don't hijack this bug to discuss the problem with the hibernate key (bug #39240); you can use "sudo /etc/acpi/hibernate.sh" to test meanwhile -- IBM Thinkpad X41 suspend to disk unsatisfactory regression https://launchpad.net/malone/bugs/29767 From gnucoder at syscraft.net Fri Apr 14 19:36:25 2006 From: gnucoder at syscraft.net (Mohammed) Date: Fri, 14 Apr 2006 19:36:25 -0000 Subject: [Bug 37472] Re: the keyboard don't work perfectly on laptops acer travelmate 2300 series with Dapper References: <20060331122206.23707.692.malonedeb@gandwana.ubuntu.com> Message-ID: <20060414193625.16492.77107.malone@gandwana.ubuntu.com> I think that is a major problem, because the laptop is not usable without keyboard and touche pad ** Changed in: linux-source-2.6.15 (Ubuntu) Severity: Normal => Major Assignee: (unassigned) => Mohammed -- the keyboard don't work perfectly on laptops acer travelmate 2300 series with Dapper https://launchpad.net/malone/bugs/37472 From cjwatson at canonical.com Fri Apr 14 19:36:19 2006 From: cjwatson at canonical.com (Colin Watson) Date: Fri, 14 Apr 2006 19:36:19 -0000 Subject: [Bug 39572] Re: Detecting Network card during install. Dapper Flight 6 References: <20060414152316.16443.26974.malonedeb@gandwana.ubuntu.com> Message-ID: <20060414193619.16443.65749.launchpad@gandwana.ubuntu.com> ** Changed in: debian-installer (Ubuntu) Sourcepackagename: debian-installer => linux-source-2.6.15 -- Detecting Network card during install. Dapper Flight 6 https://launchpad.net/malone/bugs/39572 From doko at ubuntu.com Fri Apr 14 20:09:04 2006 From: doko at ubuntu.com (Matthias Klose) Date: Fri, 14 Apr 2006 20:09:04 -0000 Subject: [Bug 37554] Re: USB Printing problem References: <20060401062148.5415.53902.malonedeb@gangotri.ubuntu.com> Message-ID: <20060414200904.1684.16486.malone@gangotri.ubuntu.com> please recheck, after a dist-upgrade to dapper 20060414, removal and resintallation of the printer ** Changed in: cupsys (Ubuntu) Assignee: (unassigned) => Matthias Klose Status: Unconfirmed => Needs Info -- USB Printing problem https://launchpad.net/malone/bugs/37554 From proggerke at iequ.be Fri Apr 14 20:07:12 2006 From: proggerke at iequ.be (coyote) Date: Fri, 14 Apr 2006 20:07:12 -0000 Subject: [Bug 35444] Re: Computer freezes with nvidia-glx and via-rhine References: <20060318090243.12186.10868.malonedeb@gandwana.ubuntu.com> Message-ID: <20060414200712.16492.32422.malone@gandwana.ubuntu.com> here you go http://users.skynet.be/burning/dmi.txt -- Computer freezes with nvidia-glx and via-rhine https://launchpad.net/malone/bugs/35444 From atie.at.matrix at gmail.com Fri Apr 14 20:58:12 2006 From: atie.at.matrix at gmail.com (atie) Date: Fri, 14 Apr 2006 20:58:12 -0000 Subject: [Bug 30848] Re: Korean/latin key(Hangul key) doesn't work. References: <20060208164242.11100.37112.malonedeb@gandwana.ubuntu.com> Message-ID: <20060414205812.1627.82993.malone@gangotri.ubuntu.com> We - Ubuntu Korean Team - strongly believe that the keycodes 122, 123 on the kernel USB Keyboard driver need to be in descending order (123, 122) to keep one kr symbols file. And, the patch for atkbd.c on Handrake's wiki is much clean code to ALWAYS keep same scancodes so that hope it's applied too at same time. With 20060328 Daily CD, test for ps/2 type keyboard was OK, and anytime we'd be happy to test further fixes. -- Korean/latin key(Hangul key) doesn't work. https://launchpad.net/malone/bugs/30848 From doko at ubuntu.com Fri Apr 14 21:02:55 2006 From: doko at ubuntu.com (Matthias Klose) Date: Fri, 14 Apr 2006 21:02:55 -0000 Subject: [Bug 6627] Re: lexmark z53 blank pages References: <20060110202826.5372.9972.malonedeb@gangotri.ubuntu.com> Message-ID: <20060414210255.1684.6053.malone@gangotri.ubuntu.com> kernel team udev maintainer, does this ring a bell? E [14/Apr/2006:12:16:07 -0700] [CGI] FATAL: Error inserting lp (/lib/modules/2.6.15-20-386/kernel/drivers/char/lp.ko): Operation not permitted -- lexmark z53 blank pages https://launchpad.net/malone/bugs/6627 From ubuntu at treblig.org Fri Apr 14 21:10:22 2006 From: ubuntu at treblig.org (Dave Gilbert) Date: Fri, 14 Apr 2006 21:10:22 -0000 Subject: [Bug 39602] amd76xrom amd76xrom_init_one(): Unable to register resource 0xffc00000-0xffffffff - kernel bug? References: <20060414211022.1627.57110.malonedeb@gangotri.ubuntu.com> Message-ID: <20060414211022.1627.57110.malonedeb@gangotri.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 linux-image-2.6.15-20-k7 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: I noticed in the bootup log on my Tyan S2460, and amd760MP box the following debug line: amd76xrom amd76xrom_init_one(): Unable to register resource 0xffc00000-0xffffffff - kernel bug? I suspect it is minor; it certainly doesn't seem to be causing any problems (unless its the reasons for reboot/shutdown problems I've had in the past). -- amd76xrom amd76xrom_init_one(): Unable to register resource 0xffc00000-0xffffffff - kernel bug? https://launchpad.net/malone/bugs/39602 From jhorey at gmail.com Fri Apr 14 22:00:51 2006 From: jhorey at gmail.com (jhorey) Date: Fri, 14 Apr 2006 22:00:51 -0000 Subject: [Bug 32394] Re: weird interaction between headphone detect and auto mute on iBook G4 (snapper/tumbler) References: <20060221234042.31322.68245.malonedeb@gangotri.ubuntu.com> Message-ID: <20060414220051.16443.69050.malone@gandwana.ubuntu.com> I can confirm both the problem and workaround on a PowerBook (G4, 15", 1.5 ghz) using the latest Dapper and KDE packages. -- weird interaction between headphone detect and auto mute on iBook G4 (snapper/tumbler) https://launchpad.net/malone/bugs/32394 From mdz at ubuntu.com Fri Apr 14 22:20:32 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Fri, 14 Apr 2006 22:20:32 -0000 Subject: [Bug 33470] Re: Installed kernel has faulty via_Rhine, Live CD does not. References: <20060302210905.17498.2678.malonedeb@gangotri.ubuntu.com> Message-ID: <20060414222032.16492.14716.malone@gandwana.ubuntu.com> This sounds like fallout from the old _clashed interface naming; I see no evidence of a kernel bug here. ** Changed in: linux-source-2.6.15 linux-image-2.6.15-16-k7 (Ubuntu) Status: Fix Committed => Rejected Target: dapper => None -- Installed kernel has faulty via_Rhine, Live CD does not. https://launchpad.net/malone/bugs/33470 From fernando at moreira.co.uk Fri Apr 14 22:36:18 2006 From: fernando at moreira.co.uk (fmo) Date: Fri, 14 Apr 2006 22:36:18 -0000 Subject: [Bug 9713] Re: radeon/amd64 random hangs References: <20060113131120.21012.87353.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060414223618.16492.71171.malone@gandwana.ubuntu.com> After testing Dapper, the same problems happens, so I did some more tests and I finally found the source of the problem, it's in the AMD64_AGP modules, after blacklisting it, I had no more hangs. -- radeon/amd64 random hangs https://launchpad.net/malone/bugs/9713 From stewart at flamingspork.com Fri Apr 14 23:39:52 2006 From: stewart at flamingspork.com (Stewart Smith) Date: Fri, 14 Apr 2006 23:39:52 -0000 Subject: [Bug 37430] Crash during breezy->dapper upgrade References: <20060331041215.23707.99296.malonedeb@gandwana.ubuntu.com> Message-ID: <20060414233952.1627.6118.launchpad@canonical@gangotri.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Major Priority: (none set) Status: Needs Info Description: Upgrading using aptitude, after having replaced occurences of breezy in the repository list with dapper. modprobe had gotten stuck in an infinite loop during pcmcia-cs startup (process '/etc/init.d/pcmcia-cs start' was running with a child of modprobe that was using 100% cpu). I killed the 'pcmcia-cs start' process and the upgrade continued. Until a hard crash when starting acpi. Naturally, now a half upgraded system that won't boot. At the time i had the vmware modules loaded, but no virtual machines running. this is the free vmware server recently released. Luckily I'm an advanced enough user that I can get around this with boot cds, dpkg foo and other such things. So I am making progress in getting back to a system that even boots. Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Major Priority: (none set) Status: Needs Info Description: Upgrading using aptitude, after having replaced occurences of breezy in the repository list with dapper. modprobe had gotten stuck in an infinite loop during pcmcia-cs startup (process '/etc/init.d/pcmcia-cs start' was running with a child of modprobe that was using 100% cpu). I killed the 'pcmcia-cs start' process and the upgrade continued. Until a hard crash when starting acpi. Naturally, now a half upgraded system that won't boot. At the time i had the vmware modules loaded, but no virtual machines running. this is the free vmware server recently released. Luckily I'm an advanced enough user that I can get around this with boot cds, dpkg foo and other such things. So I am making progress in getting back to a system that even boots. -- Crash during breezy->dapper upgrade https://launchpad.net/malone/bugs/37430 From mdz at ubuntu.com Fri Apr 14 23:39:52 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Fri, 14 Apr 2006 23:39:52 -0000 Subject: [Bug 37430] Re: Crash during breezy->dapper upgrade References: <20060331041215.23707.99296.malonedeb@gandwana.ubuntu.com> Message-ID: <20060414233952.1627.44820.malone@gangotri.ubuntu.com> There could be more than one bug here, or the eventual hang could be a result of a problem with loading the PCMCIA module. For the hang: Please try to get a backtrace of the crash by following https://wiki.ubuntu.com/DebuggingSystemCrash For the pcmcia infinite loop issue: Please get dmesg output at the point where it is looping, and try stracing the modprobe process to see what it is doing. Passing this bug to linux-source-2.6.15 since the most serious issue is the hang; if we discover a secondary issue with pcmcia-cs, that will be filed separately ** Changed in: Ubuntu Sourcepackagename: None => linux-source-2.6.15 Severity: Critical => Major Status: Unconfirmed => Needs Info -- Crash during breezy->dapper upgrade https://launchpad.net/malone/bugs/37430 From mdz at ubuntu.com Fri Apr 14 23:40:20 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Fri, 14 Apr 2006 23:40:20 -0000 Subject: [Bug 36998] Re: Flight 5 Kernel Won't Boot on an IBM Thinkpad R30 References: <20060328130330.20514.53400.malonedeb@gangotri.ubuntu.com> Message-ID: <20060414234021.1627.99909.malone@gangotri.ubuntu.com> Closing spurious Ubuntu task; bug remains open against the appropriate package ** Changed in: Ubuntu Status: Unconfirmed => Rejected ** Changed in: linux-source-2.6.15 (Ubuntu) Severity: Critical => Major ** Changed in: linux-source-2.6.15 (Ubuntu) Assignee: (unassigned) => Ben Collins -- Flight 5 Kernel Won't Boot on an IBM Thinkpad R30 https://launchpad.net/malone/bugs/36998 From mdz at ubuntu.com Fri Apr 14 23:42:03 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Fri, 14 Apr 2006 23:42:03 -0000 Subject: [Bug 34870] Re: ipw2200 repeatedly crashes. References: <20060314104909.30082.87848.malonedeb@gandwana.ubuntu.com> Message-ID: <20060414234204.1684.99365.malone@gangotri.ubuntu.com> Closing linux-source-2.6.12 task; bug remains open against 2.6.15 ** Changed in: linux-source-2.6.12 linux-image-2.6.12-10-686 (Ubuntu) Status: Needs Info => Rejected ** Changed in: linux-source-2.6.15 (Ubuntu) Severity: Critical => Major -- ipw2200 repeatedly crashes. https://launchpad.net/malone/bugs/34870 From mdz at ubuntu.com Fri Apr 14 23:45:15 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Fri, 14 Apr 2006 23:45:15 -0000 Subject: [Bug 34870] Re: ipw2200 repeatedly crashes. References: <20060314104909.30082.87848.malonedeb@gandwana.ubuntu.com> Message-ID: <20060414234515.16492.43907.malone@gandwana.ubuntu.com> This bug seems to be somewhat conflated; if you are experiencing a crash, please follow the instructions at https://wiki.ubuntu.com/DebuggingSystemCrash and attach the resulting trace. This will hopefully show us whether your crashes are at all related. Benjamin, your logs show DMA errors on your CD-ROM which could be related. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Confirmed => Needs Info -- ipw2200 repeatedly crashes. https://launchpad.net/malone/bugs/34870 From mdz at ubuntu.com Fri Apr 14 23:47:48 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Fri, 14 Apr 2006 23:47:48 -0000 Subject: [Bug 32123] Re: initramfs not generated correctly on upgrade to Dapper References: <20060220130413.1427.33476.malonedeb@gangotri.ubuntu.com> Message-ID: <20060414234748.16443.89393.launchpad@gandwana.ubuntu.com> ** Summary changed: - Cannot find ide hard disk on boot + initramfs not generated correctly on upgrade to Dapper -- initramfs not generated correctly on upgrade to Dapper https://launchpad.net/malone/bugs/32123 From mdz at ubuntu.com Fri Apr 14 23:49:50 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Fri, 14 Apr 2006 23:49:50 -0000 Subject: [Bug 34508] Re: 2.6.15 kernel fails to boot on ppc machine References: <20060311210305.30082.75520.malonedeb@gandwana.ubuntu.com> Message-ID: <20060414234950.1684.61746.malone@gangotri.ubuntu.com> Ben Stanley: your problem sounds like bug #32123 and is unrelated to this one. phibxr: if you can find out how this was fixed in Gentoo, we would like to know. Is there a bug report in their bug tracking system? Anyone experiencing this bug: please get a trace by following https://wiki.ubuntu.com/DebuggingSystemCrash ** Bug watch added: Red Hat Bugzilla #183278 https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=183278 ** Changed in: linux-source-2.6.15 linux-image-2.6.15-18-powerpc (Ubuntu) Binarypackagename: linux-image-2.6.15-18-powerpc => None Severity: Critical => Major -- 2.6.15 kernel fails to boot on ppc machine https://launchpad.net/malone/bugs/34508 From leon at bottou.org Sat Apr 15 00:39:36 2006 From: leon at bottou.org (leonbottou) Date: Sat, 15 Apr 2006 00:39:36 -0000 Subject: [Bug 39611] ipw2200 - firmware error detected References: <20060415003936.1627.22283.malonedeb@gangotri.ubuntu.com> Message-ID: <20060415003936.1627.22283.malonedeb@gangotri.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: I just upgraded from breezy to dapper. The current kernel is 2.6.15-20. I had lots of problems with ipw2200. Lots of spurious disassociations. Lots of error messages: ipw2200: firmware error detected. Restarting. This is simply *unusable*. After a few hours of trials and errors, I installed ieee80211-1.1.13 and ipw2200-1.1.2 (m) from the respective sourceforge sites. These modules work for me. No more disassociation. - L. P.S. Fujitsu-Siemens P7010. Wireless is Intel 2915abg It was working fine with breezy (kernel 2.6.12). -- ipw2200 - firmware error detected https://launchpad.net/malone/bugs/39611 From tomwolfe at gmail.com Sat Apr 15 01:22:25 2006 From: tomwolfe at gmail.com (Thomas Wolfe) Date: Sat, 15 Apr 2006 01:22:25 -0000 Subject: [Bug 35213] Re: hibernate fails when not on AC power on HP Pavilion ZT3000 - regression from breezy References: <20060316170910.6510.54248.malonedeb@gangotri.ubuntu.com> Message-ID: <20060415012225.16492.36831.malone@gandwana.ubuntu.com> Disabling laptop-mode fixed it for me, so it must be a bug in that, kinda sucks though. I did this sudo nano /etc/laptop-mode/laptop-mode.conf and changed it so it is not enabled when on battery. I rebooted (by just using the init scrips to restart it did not work) and suddenly suspend and hibernate work. Although suddenly I cannot open that file so I can show you what I changed. now i get: nano: error while loading shared libraries: /lib/libncursesw.so.5: cannot read file data: Input/output error and it opened fine just before i put it to sleep (also put it into hibernation, both worked, and it has worked 5 times in a row so far, so i ma fairly confident that the problem is laptop-mode) -- hibernate fails when not on AC power on HP Pavilion ZT3000 - regression from breezy https://launchpad.net/malone/bugs/35213 From mdz at ubuntu.com Sat Apr 15 01:32:36 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Sat, 15 Apr 2006 01:32:36 -0000 Subject: [Bug 14318] Re: nautilus does not warn when copying files to read only usb flash drive References: <20060113133601.21012.47120.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060415013236.16492.50435.malone@gandwana.ubuntu.com> This bug is set to target dapper, but it's an upstream issue with no fix in sight. Unless there is a real opportunity to fix this for dapper final, please remove the milestone -- nautilus does not warn when copying files to read only usb flash drive https://launchpad.net/malone/bugs/14318 From mdz at ubuntu.com Sat Apr 15 01:33:43 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Sat, 15 Apr 2006 01:33:43 -0000 Subject: [Bug 14294] Re: on powerbook sound successively quieter until unaudible References: <20060113133554.21012.14467.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060415013343.16492.6957.malone@gandwana.ubuntu.com> This bug is targeting dapper, but it is an upstream issue and it doesn't seem feasible to fix in that timeframe, if at all. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Needs Info => Confirmed Target: ubuntu-6.06 => None -- on powerbook sound successively quieter until unaudible https://launchpad.net/malone/bugs/14294 From mdz at ubuntu.com Sat Apr 15 01:34:33 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Sat, 15 Apr 2006 01:34:33 -0000 Subject: [Bug 12637] Re: LCD Brightness on Laptop Always Set Very Low at Boot References: <20060113132646.21012.81619.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060415013433.1627.4516.malone@gangotri.ubuntu.com> This bug is targeting Dapper, but seems to be an upstream issue with no fix in sight. Ben, is this actually feasible to fix for Dapper? -- LCD Brightness on Laptop Always Set Very Low at Boot https://launchpad.net/malone/bugs/12637 From tommy.trussell at gmail.com Sat Apr 15 01:44:16 2006 From: tommy.trussell at gmail.com (Tommy Trussell) Date: Sat, 15 Apr 2006 01:44:16 -0000 Subject: [Bug 39499] Re: System doesn't power down under Dapper 686 References: <20060413211152.16443.87018.malonedeb@gandwana.ubuntu.com> Message-ID: <20060415014416.16443.66931.malone@gandwana.ubuntu.com> I think Frank and I are describing different problems -- he and I were discussing this on the ubuntu-users list and I asked him to add to my bug because he said he was having the same trouble I described, but it sounds like his hang is during startup; my hang is during shutdown. (Frank please confirm!) I just added reboot=h temporarily to the kernel parameters in grub, and it still didn't power down when I chose the shutdown command. It just occurred to me that a dmesg might be instructive, as well as the other items in https://wiki.ubuntu.com/DebuggingKernelProblems -- System doesn't power down under Dapper 686 https://launchpad.net/malone/bugs/39499 From mdz at ubuntu.com Sat Apr 15 01:43:25 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Sat, 15 Apr 2006 01:43:25 -0000 Subject: [Bug 21804] Re: alsa-utils cannot always restore mixer settings correctly across upgrades References: <20060113141451.21012.95289.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060415014325.1627.90378.launchpad@gangotri.ubuntu.com> ** Summary changed: - Muted sound after dist-upgrade from Hoary to Breezy + alsa-utils cannot always restore mixer settings correctly across upgrades ** Description changed: - Sound's gone. No error messages, I just hear nothing. Volume's at max, not - muted, works in perfectly whatever hoary shipped. + The problem is that the alsa-utils package inadequately handles changes in + the mixer interface from one kernel version to another. On shutting down + the mixer state is stored in /var/lib/alsa/asound.state. After booting + with the new kernel, "alsactl restore" tries to feed this asound.state to + the (new 'n' improved) driver and the driver gags because the mixer + descriptions have changed. - juerd at nano:~$ lspci | grep audio - 0000:00:1e.2 Multimedia audio controller: Intel Corp. 82801FB/FBM/FR/FW/FRW - (ICH6 Family) AC'97 Audio Controller (rev 03) - juerd at nano:~$ lsmod | grep snd - snd_intel8x0 33152 5 - snd_ac97_codec 83452 1 snd_intel8x0 - snd_pcm_oss 52704 0 - snd_mixer_oss 19296 1 snd_pcm_oss - snd_pcm 88840 5 snd_intel8x0,snd_ac97_codec,snd_pcm_oss - snd_timer 24164 3 snd_pcm - snd 54884 12 - snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer - soundcore 9600 1 snd - snd_page_alloc 10600 2 snd_intel8x0,snd_pcm + /etc/init.d/alsa-utils already runs alsactl with the "-F" option in an + attempt to deal with this, but apparently that is not good enough. - Not even catting a kernel image to the sound device produces anything - audible. - - The computer is a IBM ThinkPad X41. - - If any more information is needed, let me know please. + It would be nice if alsactl and the driver dealt with this problem in a + better way. ** Changed in: alsa-utils (Ubuntu) Assignee: Thomas Hood => (unassigned) Target: ubuntu-6.06 => None -- alsa-utils cannot always restore mixer settings correctly across upgrades https://launchpad.net/malone/bugs/21804 From mdz at ubuntu.com Sat Apr 15 01:44:43 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Sat, 15 Apr 2006 01:44:43 -0000 Subject: [Bug 17589] Re: System clock runs far too fast References: <20060113135219.21012.1755.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060415014444.1684.80720.malone@gangotri.ubuntu.com> Closing superfluous Ubuntu task; bug remains open against the correct package already ** Changed in: Baltix Status: Unconfirmed => Rejected -- System clock runs far too fast https://launchpad.net/malone/bugs/17589 From mdz at ubuntu.com Sat Apr 15 01:47:59 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Sat, 15 Apr 2006 01:47:59 -0000 Subject: [Bug 17125] Re: Little acpi event windows pop up in KDE References: <20060113134955.21012.33484.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060415014800.16492.77402.launchpad@gandwana.ubuntu.com> ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Needs Info => Confirmed Target: ubuntu-6.06 => None -- Little acpi event windows pop up in KDE https://launchpad.net/malone/bugs/17125 From mdz at ubuntu.com Sat Apr 15 01:46:50 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Sat, 15 Apr 2006 01:46:50 -0000 Subject: [Bug 17589] Re: System clock runs far too fast References: <20060113135219.21012.1755.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060415014650.16443.14836.malone@gandwana.ubuntu.com> This sounds similar to http://bugzilla.kernel.org/show_bug.cgi?id=5038 Could those of you experiencing this bug try some of the tests/workarounds there? ** Changed in: linux-source-2.6.15 (Ubuntu) Target: ubuntu-6.06 => None -- System clock runs far too fast https://launchpad.net/malone/bugs/17589 From mdz at ubuntu.com Sat Apr 15 01:50:01 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Sat, 15 Apr 2006 01:50:01 -0000 Subject: [Bug 16939] Re: trackball is too clicky References: <20060113134858.21012.14944.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060415015001.16492.37486.launchpad@gandwana.ubuntu.com> ** Changed in: linux-source-2.6.15 (Ubuntu) Target: ubuntu-6.06 => None -- trackball is too clicky https://launchpad.net/malone/bugs/16939 From mdz at ubuntu.com Sat Apr 15 01:51:12 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Sat, 15 Apr 2006 01:51:12 -0000 Subject: [Bug 16938] Re: snd_emu10k1 does not resume correctly after suspend to disk References: <20060113134858.21012.49774.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060415015112.16443.93089.malone@gandwana.ubuntu.com> Did this get reported upstream? Audio team: Can anyone confirm whether this is in fact a duplicate of bug #4215? ** Changed in: linux-source-2.6.15 (Ubuntu) Target: ubuntu-6.06 => None -- snd_emu10k1 does not resume correctly after suspend to disk https://launchpad.net/malone/bugs/16938 From mdz at ubuntu.com Sat Apr 15 01:53:18 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Sat, 15 Apr 2006 01:53:18 -0000 Subject: [Bug 16454] Re: sound still comes out of speakers when PCM volume is set to 0 References: <20060113134639.21012.49160.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060415015319.16492.93585.launchpad@gandwana.ubuntu.com> ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Needs Info => Confirmed Target: ubuntu-6.06 => None -- sound still comes out of speakers when PCM volume is set to 0 https://launchpad.net/malone/bugs/16454 From mdz at ubuntu.com Sat Apr 15 01:53:44 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Sat, 15 Apr 2006 01:53:44 -0000 Subject: [Bug 16163] Re: Missing power events on nondescript Sony laptop? References: <20060113134505.21012.24613.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060415015344.16443.34238.launchpad@gandwana.ubuntu.com> ** Changed in: linux-source-2.6.15 (Ubuntu) Target: ubuntu-6.06 => None -- Missing power events on nondescript Sony laptop? https://launchpad.net/malone/bugs/16163 From mdz at ubuntu.com Sat Apr 15 01:54:12 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Sat, 15 Apr 2006 01:54:12 -0000 Subject: [Bug 15220] Re: Shutdown fails to power off Tyan S2460-based system References: <20060113134106.21012.22861.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060415015412.16443.53267.launchpad@gandwana.ubuntu.com> ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Needs Info => Confirmed Target: ubuntu-6.06 => None -- Shutdown fails to power off Tyan S2460-based system https://launchpad.net/malone/bugs/15220 From mdz at ubuntu.com Sat Apr 15 01:54:52 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Sat, 15 Apr 2006 01:54:52 -0000 Subject: [Bug 14887] Re: Kernel 2.6.10 APM and usb_his IRQ Conflicts Thinkpad 600 References: <20060113133913.21012.49992.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060415015452.1684.51642.malone@gangotri.ubuntu.com> Needs confirmation on Dapper ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Confirmed => Needs Info Target: ubuntu-6.06 => None -- Kernel 2.6.10 APM and usb_his IRQ Conflicts Thinkpad 600 https://launchpad.net/malone/bugs/14887 From tommy.trussell at gmail.com Sat Apr 15 01:57:09 2006 From: tommy.trussell at gmail.com (Tommy Trussell) Date: Sat, 15 Apr 2006 01:57:09 -0000 Subject: [Bug 39499] Re: System doesn't power down under Dapper 686 References: <20060413211152.16443.87018.malonedeb@gandwana.ubuntu.com> Message-ID: <20060415015709.1627.97322.malone@gangotri.ubuntu.com> let me know if it would be interesting to have any of those under the 386 kernel for comparison. ** Attachment added: "dmesg from 686 kernel" http://librarian.launchpad.net/2123737/20060414_686_dmesg.txt ** Attachment added: "lspci -vv from 686 kernel" http://librarian.launchpad.net/2123738/20060414_686_lspci-vv.txt ** Attachment added: "lspci -vvn from 686 kernel" http://librarian.launchpad.net/2123739/20060414_686_lspci-vvn.txt -- System doesn't power down under Dapper 686 https://launchpad.net/malone/bugs/39499 From crimsun at fungus.sh.nu Sat Apr 15 02:25:35 2006 From: crimsun at fungus.sh.nu (Daniel T. Chen) Date: Sat, 15 Apr 2006 02:25:35 -0000 Subject: [Bug 16938] Re: snd_emu10k1 does not resume correctly after suspend to disk References: <20060113134858.21012.49774.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060415022535.16492.37935.malone@gandwana.ubuntu.com> *** This bug is a duplicate of bug 4215 *** It is a duplicate of #4215. It was reported and fixed in Linus's git tree; marking closed. ** This bug has been marked a duplicate of bug 4215 OOPS on suspend or inaudible sound post-resume from hibernation with emu10k1 ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Confirmed => Fix Released -- snd_emu10k1 does not resume correctly after suspend to disk https://launchpad.net/malone/bugs/16938 From homerhomer at gmail.com Sat Apr 15 09:27:20 2006 From: homerhomer at gmail.com (Mike Homer) Date: Sat, 15 Apr 2006 09:27:20 -0000 Subject: [Bug 26703] Re: ACX Drivers -- needs updating. References: <20060113145051.21012.52657.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060415092720.1684.40380.malone@gangotri.ubuntu.com> Same issue here too lspci 0000:02:09.0 Network controller: Texas Instruments ACX 111 54Mbps Wireless dmesg output [4294911.880000] acx: Loaded combined PCI/USB driver, firmware_ver=default [4294911.881000] acx: compiled to use 32bit I/O access. I/O timing issues might occur, such as non-working firmware upload. Report them [4294911.892000] ACPI: PCI Interrupt 0000:02:09.0[A] -> Link [APC2] -> GSI 17 (l evel, low) -> IRQ 201 [4294911.892000] acx: found ACX111-based wireless network card at 0000:02:09.0, irq:201, phymem1:0xE0024000, phymem2:0xE0000000, mem1:0xf9040000, mem1_size:8192 , mem2:0xfa7c0000, mem2_size:131072 [4294912.629000] acx: firmware 'Rev 2.3.1.31' does not work well with this drive r [4294912.629000] acx: form factor 0x01 ((mini-)PCI / CardBus), radio type 0x16 ( Radia), EEPROM version 0x05, uploaded firmware 'Rev 2.3.1.31' (0x03010101) [4294912.630000] acx v0.3.21: net device wlan0, driver compiled against wireless extensions 19 and Linux 2.6.15-20-k7 [4294912.630000] usbcore: registered new driver acx_usb [4294912.817000] ADDRCONF(NETDEV_UP): wlan0: link is not ready -- ACX Drivers -- needs updating. https://launchpad.net/malone/bugs/26703 From thomas.klein at lanterne.org Sat Apr 15 09:56:39 2006 From: thomas.klein at lanterne.org (gourdin) Date: Sat, 15 Apr 2006 09:56:39 -0000 Subject: [Bug 37164] Re: sky2 ethernet driver problems References: <20060329134103.6279.17661.malonedeb@gandwana.ubuntu.com> Message-ID: <20060415095639.16443.29983.malone@gandwana.ubuntu.com> Hi there on my sony sz1 laptop intel core duo 1.66 kernel 2.6.15-20-686 #1 SMP PREEMPT ubuntu dapper drake uptodate network hangs when net load grows a bit : /var/log/messages : Apr 15 11:35:42 archon kernel: [4297572.802000] NETDEV WATCHDOG: eth0: transmit timed out Apr 15 11:35:42 archon kernel: [4297572.802000] sky2 hardware hung? flushing another problem during a long network transfert : (the laptop freeze after this problem) Apr 13 03:12:12 archon kernel: [4313856.784000] NETDEV WATCHDOG: eth0: transmit timed out Apr 13 03:12:13 archon kernel: [4313856.784000] sky2 hardware hung? flushing Apr 13 03:12:13 archon kernel: [4313856.784000] Badness in dst_release at include/net/ dst.h:153 Apr 13 03:12:13 archon kernel: [4313856.784000] [__kfree_skb+298/304] __kfree_skb+0x1 2a/0x130 Apr 13 03:12:13 archon kernel: [4313856.784000] [pg0+543916214/1069188096] sky2_tx_co mplete+0x176/0x1d0 [sky2] Apr 13 03:12:13 archon kernel: [4313856.784000] [pg0+543920982/1069188096] sky2_statu s_intr+0x206/0x360 [sky2] Apr 13 03:12:13 archon kernel: [4313856.784000] [pg0+543922548/1069188096] sky2_poll+ 0x54/0x230 [sky2] Apr 13 03:12:13 archon kernel: [4313856.784000] [net_rx_action+222/512] net_rx_action +0xde/0x200 Apr 13 03:12:13 archon kernel: [4313856.784000] [__do_softirq+114/224] __do_softirq+0 x72/0xe0 Apr 13 03:12:13 archon kernel: [4313856.784000] [do_softirq+53/64] do_softirq+0x35/0x 40 : Apr 13 03:12:13 archon kernel: [4313856.784000] [irq_exit+69/80] irq_exit+0x45/0x50 Apr 13 03:12:13 archon kernel: [4313856.784000] [do_IRQ+30/48] do_IRQ+0x1e/0x30 Apr 13 03:12:13 archon kernel: [4313856.784000] [common_interrupt+26/32] common_inter rupt+0x1a/0x20 Apr 13 03:12:13 archon kernel: [4313856.784000] [_spin_unlock_irqrestore+6/32] _spin_ unlock_irqrestore+0x6/0x20 Apr 13 03:12:13 archon kernel: [4313856.784000] [pipe_writev+1195/1408] pipe_writev+0 x4ab/0x580 Apr 13 03:12:13 archon kernel: [4313856.784000] [do_syslog+201/992] do_syslog+0xc9/0x 3e0 Apr 13 03:12:13 archon kernel: [4313856.784000] [pipe_write+56/64] pipe_write+0x38/0x 40 Apr 13 03:12:13 archon kernel: [4313856.784000] [vfs_write+214/432] vfs_write+0xd6/0x 1b0 Apr 13 03:12:13 archon kernel: [4313856.784000] [sys_write+75/128] sys_write+0x4b/0x8 0 Apr 13 03:12:13 archon kernel: [4313856.784000] [sysenter_past_esp+84/117] sysenter_p ast_esp+0x54/0x75 Apr 13 03:12:13 archon kernel: [4313856.784000] Attempt to release alive inet socket d fcadc40 Apr 13 03:12:13 archon kernel: [4313856.784000] Badness in dst_release at include/net/ dst.h:153 Apr 13 03:12:13 archon kernel: [4313856.784000] [__kfree_skb+298/304] __kfree_skb+0x1 2a/0x130 Apr 13 03:12:13 archon kernel: [4313856.784000] [pg0+543916214/1069188096] sky2_tx_co mplete+0x176/0x1d0 [sky2] Apr 13 03:12:13 archon kernel: [4313856.784000] [pg0+543920982/1069188096] sky2_statu s_intr+0x206/0x360 [sky2] Apr 13 03:12:13 archon kernel: [4313856.784000] [pg0+543922548/1069188096] sky2_poll+ 0x54/0x230 [sky2] Apr 13 03:12:13 archon kernel: [4313856.784000] [net_rx_action+222/512] net_rx_action +0xde/0x200 Apr 13 03:12:13 archon kernel: [4313856.784000] [__do_softirq+114/224] __do_softirq+0 x72/0xe0 Apr 13 03:12:13 archon kernel: [4313856.784000] [do_softirq+53/64] do_softirq+0x35/0x 40 Apr 13 03:12:13 archon kernel: [4313856.784000] [irq_exit+69/80] irq_exit+0x45/0x50 Apr 13 03:12:13 archon kernel: [4313856.784000] [do_IRQ+30/48] do_IRQ+0x1e/0x30 Apr 13 03:12:13 archon kernel: [4313856.784000] [common_interrupt+26/32] common_inter rupt+0x1a/0x20 Apr 13 03:12:13 archon kernel: [4313856.784000] [_spin_unlock_irqrestore+6/32] _spin_ unlock_irqrestore+0x6/0x20 Apr 13 03:12:13 archon kernel: [4313856.784000] [pipe_writev+1195/1408] pipe_writev+0 x4ab/0x580 Apr 13 03:12:13 archon kernel: [4313856.784000] [do_syslog+201/992] do_syslog+0xc9/0x 3e0 Apr 13 03:12:13 archon kernel: [4313856.784000] [pipe_write+56/64] pipe_write+0x38/0x 40 Apr 13 03:12:13 archon kernel: [4313856.784000] [vfs_write+214/432] vfs_write+0xd6/0x 1b0 Apr 13 03:12:13 archon kernel: [4313856.784000] [sys_write+75/128] sys_write+0x4b/0x8 0 Apr 13 03:12:13 archon kernel: [4313856.784000] [sysenter_past_esp+84/117] sysenter_p ast_esp+0x54/0x75 Apr 13 03:12:20 archon kernel: [4313864.657000] Attempt to release alive inet socket d fcadc40 Apr 13 03:12:30 archon kernel: [4313874.247000] Attempt to release alive inet socket d fcadc40 Apr 13 03:12:42 archon kernel: [4313886.342000] Attempt to release alive inet socket d fcadc40 Apr 13 03:13:40 archon kernel: [4313944.729000] Attempt to release alive inet socket d fcadc40 Apr 13 03:13:44 archon kernel: [4313946.786000] NETDEV WATCHDOG: eth0: transmit timed out Apr 13 03:13:44 archon kernel: [4313946.786000] sky2 hardware hung? flushing Apr 13 03:13:44 archon kernel: [4313946.786000] Badness in dst_release at include/net/ dst.h:153 Apr 13 03:13:44 archon kernel: [4313946.786000] [__kfree_skb+298/304] __kfree_skb+0x1 2a/0x130 Apr 13 03:13:44 archon kernel: [4313946.786000] [pg0+543916214/1069188096] sky2_tx_co mplete+0x176/0x1d0 [sky2] Apr 13 03:13:44 archon kernel: [4313946.786000] [pg0+543916345/1069188096] sky2_tx_cl Apr 13 03:13:44 archon kernel: [4313946.786000] [pg0+543919102/1069188096] sky2_tx_ti meout+0x16e/0x1d0 [sky2] Apr 13 03:13:44 archon kernel: [4313946.786000] [dev_watchdog+0/208] dev_watchdog+0x0 /0xd0 Apr 13 03:13:44 archon kernel: [4313946.786000] [dev_watchdog+195/208] dev_watchdog+0 xc3/0xd0 Apr 13 03:13:44 archon kernel: [4313946.786000] [run_timer_softirq+227/480] run_timer _softirq+0xe3/0x1e0 Apr 13 03:13:44 archon kernel: [4313946.787000] [__do_softirq+114/224] __do_softirq+0 x72/0xe0 Apr 13 03:13:44 archon kernel: [4313946.787000] [do_softirq+53/64] do_softirq+0x35/0x 40 Apr 13 03:13:44 archon kernel: [4313946.787000] [irq_exit+69/80] irq_exit+0x45/0x50 Apr 13 03:13:44 archon kernel: [4313946.787000] [apic_timer_interrupt+28/36] apic_tim er_interrupt+0x1c/0x24 Apr 13 03:13:44 archon kernel: [4313946.787000] [pg0+541232795/1069188096] acpi_proce ssor_idle+0x184/0x32d [processor] Apr 13 03:13:44 archon kernel: [4313946.787000] [cpu_idle+111/192] cpu_idle+0x6f/0xc0 Apr 13 03:13:44 archon kernel: [4313946.787000] [start_kernel+410/512] start_kernel+0 x19a/0x200 Apr 13 03:13:44 archon kernel: [4313946.787000] [unknown_bootoption+0/496] unknown_bo otoption+0x0/0x1f0 Apr 13 03:13:44 archon kernel: [4313946.787000] Attempt to release alive unix socket: d45983c0 Apr 13 03:13:44 archon kernel: [4313946.787000] Badness in dst_release at include/net/ dst.h:153 Apr 13 03:13:44 archon kernel: [4313946.787000] [__kfree_skb+298/304] __kfree_skb+0x1 2a/0x130 Apr 13 03:13:44 archon kernel: [4313946.787000] [pg0+543916214/1069188096] sky2_tx_co mplete+0x176/0x1d0 [sky2] Apr 13 03:13:44 archon kernel: [4313946.787000] [pg0+543916345/1069188096] sky2_tx_cl ean+0x29/0x40 [sky2] Apr 13 03:13:44 archon kernel: [4313946.787000] [pg0+543919102/1069188096] sky2_tx_ti meout+0x16e/0x1d0 [sky2] Apr 13 03:13:44 archon kernel: [4313946.787000] [dev_watchdog+0/208] dev_watchdog+0x0 /0xd0 Apr 13 03:13:44 archon kernel: [4313946.787000] [dev_watchdog+195/208] dev_watchdog+0 xc3/0xd0 Apr 13 03:13:44 archon kernel: [4313946.787000] [run_timer_softirq+227/480] run_timer _softirq+0xe3/0x1e0 Apr 13 03:13:44 archon kernel: [4313946.787000] [__do_softirq+114/224] __do_softirq+0 x72/0xe0 Apr 13 03:13:44 archon kernel: [4313946.787000] [do_softirq+53/64] do_softirq+0x35/0x 40 Apr 13 03:13:44 archon kernel: [4313946.787000] [irq_exit+69/80] irq_exit+0x45/0x50 Apr 13 03:13:44 archon kernel: [4313946.787000] [apic_timer_interrupt+28/36] apic_tim er_interrupt+0x1c/0x24 Apr 13 03:13:44 archon kernel: [4313946.787000] [pg0+541232795/1069188096] acpi_proce ssor_idle+0x184/0x32d [processor] Apr 13 03:13:44 archon kernel: [4313946.787000] [cpu_idle+111/192] cpu_idle+0x6f/0xc0 Apr 13 03:13:44 archon kernel: [4313946.787000] [start_kernel+410/512] start_kernel+0 x19a/0x200 Apr 13 03:13:44 archon kernel: [4313946.787000] [unknown_bootoption+0/496] unknown_bo otoption+0x0/0x1f0 Apr 13 03:13:44 archon kernel: [4313946.787000] Badness in dst_release at include/net/ dst.h:153 Apr 13 03:13:44 archon kernel: [4313946.787000] [__kfree_skb+298/304] __kfree_skb+0x1 2a/0x130 Apr 13 03:13:44 archon kernel: [4313946.787000] [pg0+543916214/1069188096] sky2_tx_co mplete+0x176/0x1d0 [sky2] Apr 13 03:13:44 archon kernel: [4313946.787000] [pg0+543916345/1069188096] sky2_tx_cl ean+0x29/0x40 [sky2] Apr 13 03:13:44 archon kernel: [4313946.787000] [pg0+543919102/1069188096] sky2_tx_ti meout+0x16e/0x1d0 [sky2] Apr 13 03:13:44 archon kernel: [4313946.787000] [dev_watchdog+0/208] dev_watchdog+0x0 /0xd0 Apr 13 03:13:44 archon kernel: [4313946.787000] [dev_watchdog+195/208] dev_watchdog+0 xc3/0xd0 Apr 13 03:13:44 archon kernel: [4313946.787000] [run_timer_softirq+227/480] run_timer _softirq+0xe3/0x1e0 Apr 13 03:13:44 archon kernel: [4313946.787000] [__do_softirq+114/224] __do_softirq+0 x72/0xe0 Apr 13 03:13:44 archon kernel: [4313946.787000] [do_softirq+53/64] do_softirq+0x35/0x 40 Apr 13 03:13:44 archon kernel: [4313946.787000] [irq_exit+69/80] irq_exit+0x45/0x50 Apr 13 03:13:44 archon kernel: [4313946.787000] [apic_timer_interrupt+28/36] apic_tim er_interrupt+0x1c/0x24 Apr 13 03:13:44 archon kernel: [4313946.787000] [pg0+541232795/1069188096] acpi_proce ssor_idle+0x184/0x32d [processor] Apr 13 03:13:44 archon kernel: [4313946.787000] [cpu_idle+111/192] cpu_idle+0x6f/0xc0 Apr 13 03:13:44 archon kernel: [4313946.787000] [start_kernel+410/512] start_kernel+0 x19a/0x200 Apr 13 03:13:44 archon kernel: [4313946.787000] [unknown_bootoption+0/496] unknown_bo otoption+0x0/0x1f0 Freeze. -- sky2 ethernet driver problems https://launchpad.net/malone/bugs/37164 From thomas.klein at lanterne.org Sat Apr 15 09:57:45 2006 From: thomas.klein at lanterne.org (gourdin) Date: Sat, 15 Apr 2006 09:57:45 -0000 Subject: [Bug 37164] Re: sky2 ethernet driver problems References: <20060329134103.6279.17661.malonedeb@gandwana.ubuntu.com> Message-ID: <20060415095745.1684.77584.malone@gangotri.ubuntu.com> sorry, here is the lspci 0000:00:00.0 Host bridge: Intel Corporation Mobile Memory Controller Hub (rev 03) 0000:00:01.0 PCI bridge: Intel Corporation Mobile PCI Express Graphics Port (rev 03) 0000:00:1b.0 0403: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 02) 0000:00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 02) 0000:00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 02) 0000:00:1c.2 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 3 (rev 02) 0000:00:1c.3 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 4 (rev 02) 0000:00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #1 (rev 02) 0000:00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #2 (rev 02) 0000:00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #3 (rev 02) 0000:00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #4 (rev 02) 0000:00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 02) 0000:00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2) 0000:00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02) 0000:00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 02) 0000:00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7 Family) Serial ATA Storage Controllers cc=IDE (rev 02) 0000:00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 02) 0000:01:00.0 VGA compatible controller: nVidia Corporation: Unknown device 01d8 (rev a1) 0000:06:00.0 Network controller: Intel Corporation: Unknown device 4222 (rev 02) 0000:07:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8036 Fast Ethernet Controller (rev 15) 0000:09:04.0 CardBus bridge: Texas Instruments: Unknown device 8039 0000:09:04.1 FireWire (IEEE 1394): Texas Instruments: Unknown device 803a 0000:09:04.2 Mass storage controller: Texas Instruments: Unknown device 803b -- sky2 ethernet driver problems https://launchpad.net/malone/bugs/37164 From mikko.s.saarinen at mbnet.fi Sat Apr 15 10:58:35 2006 From: mikko.s.saarinen at mbnet.fi (Mikko Saarinen) Date: Sat, 15 Apr 2006 10:58:35 -0000 Subject: [Bug 39639] Hibernate, suspend, sleep... clarification needed References: <20060415105835.1627.17573.malonedeb@gangotri.ubuntu.com> Message-ID: <20060415105835.1627.17573.malonedeb@gangotri.ubuntu.com> Public bug reported: Affects: Ubuntu Severity: Wishlist Priority: (none set) Status: Unconfirmed Description: This is not really a bug in the OS, but rather in the names we use of these power states. What I would like to do, is open a conversation for rephrasing these actions. Now I don't really know what people mean when they are talking about hibernate, sleep, suspend or what ever people call these things! I understand that when someone speaks of sleep state, that means suspend to ram (right?). And similarly hibernate means suspend to disk. But what are people talking about when they just talk about suspend? Is it suspend to ram or disk? In the Finnish translation, I think it gets even worse! Keskeytystila, lepotila - I always get those mixed up! (Well, fortunately there is something I can do about that =) I believe that we have to deal with these issues so that everybody can talk about these with the same names. This is especially important when making a bug report here! ** Changed in: linux-source-2.6.15 (Ubuntu) Sourcepackagename: linux-source-2.6.15 => None Severity: Normal => Wishlist -- Hibernate, suspend, sleep... clarification needed https://launchpad.net/malone/bugs/39639 From rkimber at ntlworld.com Sat Apr 15 11:09:30 2006 From: rkimber at ntlworld.com (Rkimber) Date: Sat, 15 Apr 2006 11:09:30 -0000 Subject: [Bug 39643] kernel bug References: <20060415110931.16492.62907.malonedeb@gandwana.ubuntu.com> Message-ID: <20060415110931.16492.62907.malonedeb@gandwana.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 linux-image-2.6.15-20-amd64-k8 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: MSI K8 Master2-FAR dual opteron 2GB Apr 15 03:40:19 infinity kernel: [32190.377263] Kernel BUG at mm/slab.c:3340 Apr 15 03:40:19 infinity kernel: [32190.377267] invalid operand: 0000 [1] PREEMPT SMP Apr 15 03:40:19 infinity kernel: [32190.377271] CPU 0 Apr 15 03:40:19 infinity kernel: [32190.377273] Modules linked in: ext2 bluetooth binfmt_misc ipt_limit iptable_mangle ipt_LOG ipt_MASQUERADE ip_nat ipt_TOS ipt_REJECT ip_conntrack_irc ip_conntrack_ftp ipt_state ip_conntrack nfnetlink iptable_filter ip_tables video tc1100_wmi sony_acpi pcc_acpi hotkey dev_acpi container button acpi_sbs battery ac i2c_acpi_ec nls_iso8859_1 nls_cp437 vfat fat ipv6 dm_mod md_mod w83627hf hwmon_vid eeprom i2c_isa lp snd_seq_dummy snd_seq_oss snd_seq_midi snd_seq_midi_event snd_seq tsdev snd_via82xx gameport snd_ac97_codec snd_ac97_bus snd_pcm_oss snd_mixer_oss pcspkr snd_pcm snd_timer snd_page_alloc snd_mpu401_uart snd_rawmidi snd_seq_device parport_pc parport rtc snd nvidia psmouse soundcore tg3 serio_raw i2c_viapro i2c_core shpchp pci_hotplug sg sd_mod evdev ext3 jbd usb_storage scsi_mod ide_generic ehci_hcd uhci_hcd usbcore ide_disk via82cxxx generic ide_cd cdrom pdc202xx_new thermal processor fan capability commoncap vga16fb cfbcopyarea vgastate cfbimgblt cfbfillrect fbcon tilebl Apr 15 03:40:19 infinity kernel: t font bitblit softcursor Apr 15 03:40:19 infinity kernel: [32190.377331] Pid: 8, comm: events/0 Tainted: P 2.6.15-20-amd64-k8 #1 Apr 15 03:40:19 infinity kernel: [32190.377335] RIP: 0010:[cache_reap+322/528] {cache_reap+322} Apr 15 03:40:19 infinity kernel: [32190.377348] RSP: 0018:ffff81007f823e18 EFLAGS: 00010002 Apr 15 03:40:19 infinity kernel: [32190.377352] RAX: 0000000000000001 RBX: ffff810050d63f40 RCX: 0000000000000005 Apr 15 03:40:19 infinity kernel: [32190.377356] RDX: 0000000000000004 RSI: 0000000000000000 RDI: ffff810002f477e0 Apr 15 03:40:19 infinity kernel: [32190.377360] RBP: ffff810002f477c0 R08: 0000000000000000 R09: 0000000080042000 Apr 15 03:40:19 infinity kernel: [32190.377364] R10: 0000000000000003 R11: 0000000000000002 R12: 0000000000000005 Apr 15 03:40:19 infinity kernel: [32190.377369] R13: ffff81007f81a400 R14: ffff81007f81a6a0 R15: ffff810002f47808 Apr 15 03:40:19 infinity kernel: [32190.377374] FS: 00002aaaab7acce0(0000) GS:ffffffff80445800(0000) knlGS:0000000000000000 Apr 15 03:40:19 infinity kernel: [32190.377378] CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b Apr 15 03:40:19 infinity kernel: [32190.377382] CR2: 00002aaaae66d000 CR3: 000000007502b000 CR4: 00000000000006e0 Apr 15 03:40:19 infinity kernel: [32190.377387] Process events/0 (pid: 8, threadinfo ffff81007f822000, task ffff81007f821560) Apr 15 03:40:19 infinity kernel: [32190.377390] Stack: ffff810002f477e0 ffff810002c11da0 ffff810002c11da8 ffff81007f8095c0 Apr 15 03:40:19 infinity kernel: [32190.377400] 0000000000000000 0000000000000202 ffffffff80170d00 ffffffff8014f8fc Apr 15 03:40:19 infinity kernel: [32190.377406] 00000008cee7b15a ffff81007f809600 Apr 15 03:40:19 infinity kernel: [32190.377411] Call Trace:{cache_reap+0} {worker_thread+476} Apr 15 03:40:19 infinity kernel: [32190.377437] {default_wake_function+0} {worker_thread+0} Apr 15 03:40:19 infinity kernel: [32190.377461] {kthread+217} {schedule_tail+64} Apr 15 03:40:19 infinity kernel: [32190.377472] {child_rip+8} {kthread+0} Apr 15 03:40:19 infinity kernel: [32190.377495] {child_rip+0} Apr 15 03:40:19 infinity kernel: [32190.377504] Apr 15 03:40:19 infinity kernel: [32190.377505] Code: 0f 0b 68 2b fa 32 80 c2 0c 0d 66 66 66 90 48 8b 13 48 8b 43 Apr 15 03:40:19 infinity kernel: [32190.377516] RIP {cache_reap+322} RSP Apr 15 03:40:19 infinity kernel: [32190.377524] <6>note: events/0[8] exited with preempt_count 1 -- kernel bug https://launchpad.net/malone/bugs/39643 From antonio.distante at gmail.com Sat Apr 15 11:27:16 2006 From: antonio.distante at gmail.com (Antonio Distante) Date: Sat, 15 Apr 2006 11:27:16 -0000 Subject: [Bug 20195] Re: Laptop doesn't resume after S3 References: <20060113140553.21012.74245.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060415112716.16443.66398.malone@gandwana.ubuntu.com> I'm using Dapper and the problem is still here. -- Laptop doesn't resume after S3 https://launchpad.net/malone/bugs/20195 From casualprogrammer at yahoo.com Sat Apr 15 11:44:01 2006 From: casualprogrammer at yahoo.com (casualprogrammer) Date: Sat, 15 Apr 2006 11:44:01 -0000 Subject: [Bug 39411] Re: Wrong Kernel installed ( 386 instead of 686 ) References: <20060413091327.3651.67176.malonedeb@gangotri.ubuntu.com> Message-ID: <20060415114401.16443.59823.malone@gandwana.ubuntu.com> Thanks for the feedback, Daniel, I suggest to add a hint to that end to the download page as well as the install process, so people stop worrying... -- Wrong Kernel installed ( 386 instead of 686 ) https://launchpad.net/malone/bugs/39411 From doko at ubuntu.com Sat Apr 15 11:53:12 2006 From: doko at ubuntu.com (Matthias Klose) Date: Sat, 15 Apr 2006 11:53:12 -0000 Subject: [Bug 34065] Re: hard disks are powered down (even in -server kernels) References: <20060308112603.14318.51120.malonedeb@gangotri.ubuntu.com> Message-ID: <20060415115312.1684.20380.launchpad@gangotri.ubuntu.com> ** Changed in: linux-source-2.6.15 (Ubuntu) Target: None => ubuntu-6.06 -- hard disks are powered down (even in -server kernels) https://launchpad.net/malone/bugs/34065 From leezer3 at gmail.com Sat Apr 15 11:54:53 2006 From: leezer3 at gmail.com (Christopher Lees) Date: Sat, 15 Apr 2006 11:54:53 -0000 Subject: [Bug 24604] Re: Unable to load the system description tables References: <20060113142954.21012.78614.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060415115453.1627.94783.malone@gangotri.ubuntu.com> Hiya, Sorry- Had forgotten about this (Urp!!) This was only a bug with the BIOS version 1.10 on the MSI RS482-ILS board, and is not present in earlier or later revisions of the BIOS (Currently 1.30 beta 5, with which AFAIK there are no issues) -- Unable to load the system description tables https://launchpad.net/malone/bugs/24604 From gnome at flowerday.cx Sat Apr 15 12:02:26 2006 From: gnome at flowerday.cx (Crispin Flowerday) Date: Sat, 15 Apr 2006 12:02:26 -0000 Subject: [Bug 17589] Re: System clock runs far too fast References: <20060113135219.21012.1755.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060415120226.16492.56179.malone@gandwana.ubuntu.com> Booting with 'noapic' as mentioned in the kernel bug seems to solve the problem for me. -- System clock runs far too fast https://launchpad.net/malone/bugs/17589 From doko at ubuntu.com Sat Apr 15 12:07:16 2006 From: doko at ubuntu.com (Matthias Klose) Date: Sat, 15 Apr 2006 12:07:16 -0000 Subject: [Bug 29254] Re: No uevents for parport devices when parport modules loaded References: <20060121030711.28441.62841.malonedeb@gangotri.ubuntu.com> Message-ID: <20060415120716.1684.48406.malone@gangotri.ubuntu.com> set a milestone; would be nice to have parallel ports supported out of the box ** Changed in: linux-source-2.6.15 (Ubuntu) Target: None => ubuntu-6.06 -- No uevents for parport devices when parport modules loaded https://launchpad.net/malone/bugs/29254 From colpompidou at gmail.com Sat Apr 15 12:27:09 2006 From: colpompidou at gmail.com (colpompidou) Date: Sat, 15 Apr 2006 12:27:09 -0000 Subject: [Bug 26703] Re: ACX Drivers -- needs updating. References: <20060113145051.21012.52657.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060415122710.16443.16578.malone@gandwana.ubuntu.com> Same issue with a Linksys WPC54G v2 card. lspci output : 0000:03:00.0 Network controller: Texas Instruments ACX 111 54Mbps Wireless Interface Linking the default firmware to 1.2.1.34 causes it to work but links are broken with each kernel update. -- ACX Drivers -- needs updating. https://launchpad.net/malone/bugs/26703 From mikko.s.saarinen at mbnet.fi Sat Apr 15 12:45:06 2006 From: mikko.s.saarinen at mbnet.fi (Mikko Saarinen) Date: Sat, 15 Apr 2006 12:45:06 -0000 Subject: [Bug 35213] Re: hibernate fails - regression from breezy References: <20060316170910.6510.54248.malonedeb@gangotri.ubuntu.com> Message-ID: <20060415124506.1627.94313.malone@gangotri.ubuntu.com> As you can see from the heading, I'm having more general problem with hibernation. I'm using an MSI S 250 and I have these lock-ups as well with AC-power and when running on battery. I have Dapper Flight 6. uname -rv: 2.6.15-20-686 #1 SMP PREEMPT Tue Apr 4 18:37:00 UTC 2006 I thought first that the machine just stops responding and after a few minutes shut it down with the power button. Then I read your posts and knew to wait a little longer and indeed the machine does hibernate after an insanely long time. It takes something like ten minutes to do so. This doesn't happen every time, but approximately every second or third time, I would say. Moreover, I would like to know what happened to that password-protection we had in Breezy? My machine doesn't ask for a password when it wakes from hibernation. I would like it to do so, for security reasons - now anybody can continue my session and access all my data without any hacking. The following info is gathered by continuously suspending (by closing the lid) and resuming. I let 5 minutes pass between each event so I can track them easily from the logs. Debug info follows: ----- lspci: 0000:00:00.0 Host bridge: Silicon Integrated Systems [SiS] 661FX/M661FX/M661MX Host (rev 11) 0000:00:01.0 PCI bridge: Silicon Integrated Systems [SiS] SiS AGP Port (virtual PCI-to-PCI bridge) 0000:00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS963 [MuTIOL Media IO] (rev 25) 0000:00:02.1 SMBus: Silicon Integrated Systems [SiS] SiS961/2 SMBus Controller 0000:00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] 0000:00:02.6 Modem: Silicon Integrated Systems [SiS] AC'97 Modem Controller (rev a0) 0000:00:02.7 Multimedia audio controller: Silicon Integrated Systems [SiS] Sound Controller (rev a0) 0000:00:03.0 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 0f) 0000:00:03.1 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 0f) 0000:00:03.3 USB Controller: Silicon Integrated Systems [SiS] USB 2.0 Controller 0000:00:04.0 Ethernet controller: Silicon Integrated Systems [SiS] SiS900 PCI Fast Ethernet (rev 90) 0000:00:09.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev ac) 0000:00:09.1 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev ac) 0000:00:09.2 FireWire (IEEE 1394): Ricoh Co Ltd R5C552 IEEE 1394 Controller (rev 04) 0000:00:0e.0 Network controller: RaLink Ralink RT2500 802.11 Cardbus Reference Card (rev 01) 0000:01:00.0 VGA compatible controller: Silicon Integrated Systems [SiS] 661/741/760/761 PCI/AGP VGA Display Adapter ----- syslog: ** At 08:55 did a suspend with AC-Power and the machine hanged ** Apr 15 08:55:22 localhost gnome-power-manager: Hibernating computer because the lid has been closed on ac power Apr 15 08:55:22 localhost kernel: [4333192.015000] pccard: card ejected from slot 0 Apr 15 08:55:22 localhost dhclient: Internet Systems Consortium DHCP Client V3.0.3 Apr 15 08:55:22 localhost dhclient: Copyright 2004-2005 Internet Systems Consortium. Apr 15 08:55:22 localhost dhclient: All rights reserved. Apr 15 08:55:22 localhost dhclient: For info, please visit http://www.isc.org/products/DHCP Apr 15 08:55:22 localhost dhclient: Apr 15 08:55:22 localhost dhclient: Listening on LPF/ra0/00:11:09:bf:6d:00 Apr 15 08:55:22 localhost dhclient: Sending on LPF/ra0/00:11:09:bf:6d:00 Apr 15 08:55:22 localhost dhclient: Sending on Socket/fallback Apr 15 08:55:22 localhost dhclient: DHCPRELEASE on ra0 to 192.168.11.1 port 67 Apr 15 08:55:23 localhost kernel: [4333192.448000] ACPI: PCI interrupt for device 0000:00:0e.0 disabled Apr 15 08:55:26 localhost brltty[3312]: Not a serial device: /dev/ttyS0 Apr 15 09:07:00 localhost syslogd 1.4.1#17ubuntu5: restart. Apr 15 09:07:00 localhost kernel: Inspecting /boot/System.map-2.6.15-20-686 Apr 15 09:07:00 localhost kernel: Loaded 23029 symbols from /boot/System.map-2.6.15-20-686. Apr 15 09:07:00 localhost kernel: Symbols match kernel version 2.6.15. Apr 15 09:07:00 localhost kernel: No module symbols loaded - kernel modules not enabled. Apr 15 09:07:00 localhost kernel: [4294667.296000] Linux version 2.6.15-20-686 (buildd at vernadsky) (gcc version 4.0.3 (Ubuntu 4.0.3-1ubuntu3)) #1 SMP PREEMPT Tue Apr 4 18:37:00 UTC 2006 ** At 09:13 the same procedure worked ** Apr 15 09:13:02 localhost gnome-power-manager: Hibernating computer because the lid has been closed on battery power Apr 15 09:13:03 localhost kernel: [4295060.634000] pcmcia: Detected deprecated PCMCIA ioctl usage. Apr 15 09:13:03 localhost kernel: [4295060.634000] pcmcia: This interface will soon be removed from the kernel; please expect breakage unless you upgrade to new tools. Apr 15 09:13:03 localhost kernel: [4295060.635000] pcmcia: see http://www.kernel.org/pub/linux/utils/kernel/pcmcia/pcmcia.html for details. Apr 15 09:13:03 localhost kernel: [4295060.635000] pccard: card ejected from slot 0 Apr 15 09:13:04 localhost dhclient: Internet Systems Consortium DHCP Client V3.0.3 Apr 15 09:13:04 localhost dhclient: Copyright 2004-2005 Internet Systems Consortium. Apr 15 09:13:04 localhost dhclient: All rights reserved. Apr 15 09:13:04 localhost dhclient: For info, please visit http://www.isc.org/products/DHCP Apr 15 09:13:04 localhost dhclient: Apr 15 09:13:04 localhost dhclient: Listening on LPF/ra0/00:11:09:bf:6d:00 Apr 15 09:13:04 localhost dhclient: Sending on LPF/ra0/00:11:09:bf:6d:00 Apr 15 09:13:04 localhost dhclient: Sending on Socket/fallback Apr 15 09:13:05 localhost dhclient: DHCPRELEASE on ra0 to 192.168.11.1 port 67 Apr 15 09:13:05 localhost kernel: [4295062.219000] ACPI: PCI interrupt for device 0000:00:0e.0 disabled Apr 15 09:13:05 localhost brltty[3312]: Not a serial device: /dev/ttyS0 Apr 15 09:13:10 localhost brltty[3312]: Not a serial device: /dev/ttyS0 Apr 15 13:21:29 localhost kernel: [4295070.015000] Freezing cpus ... Apr 15 13:21:29 localhost kernel: [4295070.015000] Stopping tasks: =====================================================================================| Apr 15 13:21:29 localhost kernel: [4295070.017000] Shrinking memory... ^H-^H\^H|^Hdone (28736 pages freed) Apr 15 13:21:29 localhost kernel: [4295070.227000] GTM info 78,3c,280,ffffffff,13 Apr 15 13:21:29 localhost kernel: [4295070.229000] GTM info 78,3c,280,ffffffff,13 Apr 15 13:21:29 localhost kernel: [4295070.300000] ACPI: PCI interrupt for device 0000:00:09.1 disabled Apr 15 13:21:29 localhost kernel: [4295070.300000] ACPI: PCI interrupt for device 0000:00:09.0 disabled Apr 15 13:21:29 localhost kernel: [4295070.300000] ACPI: PCI interrupt for device 0000:00:03.3 disabled Apr 15 13:21:29 localhost kernel: [4295070.311000] ACPI: PCI interrupt for device 0000:00:03.1 disabled Apr 15 13:21:29 localhost kernel: [4295070.311000] ACPI: PCI interrupt for device 0000:00:03.0 disabled Apr 15 13:21:29 localhost kernel: [4295070.311000] ACPI: PCI interrupt for device 0000:00:02.7 disabled Apr 15 13:21:29 localhost kernel: [4295070.311000] swsusp: Need to copy 50863 pages Apr 15 13:21:29 localhost kernel: [4295070.311000] swsusp: Restoring Highmem ** At 14:13, this time running on battery. Suspend took about ten minutes, but it worked ** Apr 15 14:13:50 localhost gnome-power-manager: Hibernating computer because the lid has been closed on battery power Apr 15 14:13:50 localhost kernel: [4313108.123000] pccard: card ejected from slot 0 Apr 15 14:13:51 localhost dhclient: Internet Systems Consortium DHCP Client V3.0.3 Apr 15 14:13:51 localhost dhclient: Copyright 2004-2005 Internet Systems Consortium. Apr 15 14:13:51 localhost dhclient: All rights reserved. Apr 15 14:13:51 localhost dhclient: For info, please visit http://www.isc.org/products/DHCP Apr 15 14:13:51 localhost dhclient: Apr 15 14:13:51 localhost dhclient: Listening on LPF/ra0/00:11:09:bf:6d:00 Apr 15 14:13:51 localhost dhclient: Sending on LPF/ra0/00:11:09:bf:6d:00 Apr 15 14:13:51 localhost dhclient: Sending on Socket/fallback Apr 15 14:13:51 localhost dhclient: DHCPRELEASE on ra0 to 192.168.11.1 port 67 Apr 15 14:13:51 localhost kernel: [4313108.744000] ACPI: PCI interrupt for device 0000:00:0e.0 disabled Apr 15 14:13:52 localhost brltty[3312]: Not a serial device: /dev/ttyS0 Apr 15 15:02:10 localhost kernel: [4313112.637000] Freezing cpus ... Apr 15 15:02:12 localhost kernel: [4313112.638000] Stopping tasks: =======================================================================================| Apr 15 15:02:12 localhost kernel: [4313112.640000] Shrinking memory... ^H-^H\^H|^Hdone (24421 pages freed) Apr 15 15:02:12 localhost kernel: [4313124.008000] GTM info 78,3c,280,ffffffff,13 Apr 15 15:02:12 localhost kernel: [4313126.441000] GTM info 78,3c,280,ffffffff,13 Apr 15 15:02:12 localhost kernel: [4313126.444000] ACPI: PCI interrupt for device 0000:00:09.1 disabled Apr 15 15:02:12 localhost kernel: [4313126.444000] ACPI: PCI interrupt for device 0000:00:09.0 disabled Apr 15 15:02:12 localhost kernel: [4313126.444000] ACPI: PCI interrupt for device 0000:00:03.3 disabled Apr 15 15:02:12 localhost kernel: [4313126.455000] ACPI: PCI interrupt for device 0000:00:03.1 disabled Apr 15 15:02:12 localhost kernel: [4313126.455000] ACPI: PCI interrupt for device 0000:00:03.0 disabled Apr 15 15:02:12 localhost kernel: [4313126.455000] ACPI: PCI interrupt for device 0000:00:02.7 disabled Apr 15 15:02:12 localhost kernel: [4313126.455000] swsusp: Need to copy 47583 pages Apr 15 15:02:12 localhost kernel: [4313126.455000] swsusp: Restoring Highmem ----- acpid log: [Sat Apr 15 08:45:07 2006] received event "button/lid LID0 00000080 00000001" [Sat Apr 15 08:45:08 2006] notifying client 4010[108:108] [Sat Apr 15 08:45:08 2006] executing action "/etc/acpi/lid.sh" [Sat Apr 15 08:45:08 2006] BEGIN HANDLER MESSAGES [Sat Apr 15 08:45:08 2006] END HANDLER MESSAGES [Sat Apr 15 08:45:08 2006] action exited with status 0 [Sat Apr 15 08:45:08 2006] completed event "button/lid LID0 00000080 00000001" [Sat Apr 15 08:55:22 2006] received event "button/lid LID0 00000080 00000001" [Sat Apr 15 08:55:22 2006] notifying client 4010[108:108] [Sat Apr 15 08:55:22 2006] executing action "/etc/acpi/lid.sh" [Sat Apr 15 08:55:22 2006] BEGIN HANDLER MESSAGES [Sat Apr 15 08:55:22 2006] END HANDLER MESSAGES [Sat Apr 15 08:55:22 2006] action exited with status 0 [Sat Apr 15 08:55:22 2006] completed event "button/lid LID0 00000080 00000001" [Sat Apr 15 09:06:59 2006] starting up [Sat Apr 15 09:07:00 2006] 53 rules loaded [Sat Apr 15 09:07:01 2006] client connected from 4009[108:108] [Sat Apr 15 09:07:01 2006] 1 client rule loaded [Sat Apr 15 09:13:02 2006] received event "button/lid LID0 00000080 00000001" [Sat Apr 15 09:13:02 2006] notifying client 4009[108:108] [Sat Apr 15 09:13:02 2006] executing action "/etc/acpi/lid.sh" [Sat Apr 15 09:13:02 2006] BEGIN HANDLER MESSAGES [Sat Apr 15 09:13:03 2006] END HANDLER MESSAGES [Sat Apr 15 09:13:03 2006] action exited with status 0 [Sat Apr 15 09:13:03 2006] completed event "button/lid LID0 00000080 00000001" [Sat Apr 15 14:13:48 2006] received event "button/lid LID0 00000080 00000001" [Sat Apr 15 14:13:50 2006] notifying client 4009[108:108] [Sat Apr 15 14:13:50 2006] executing action "/etc/acpi/lid.sh" [Sat Apr 15 14:13:50 2006] BEGIN HANDLER MESSAGES [Sat Apr 15 14:13:50 2006] END HANDLER MESSAGES [Sat Apr 15 14:13:50 2006] action exited with status 0 [Sat Apr 15 14:13:50 2006] completed event "button/lid LID0 00000080 00000001" ----- Interestingly it can be seen from this last button/lid close event that the acpi system thinks that the suspend completed in few seconds while in my reality it took well ower five minutes (maybe even ten) for the machine to power down. Note: that Brltty just popped from somewhere during the last update. Don't need it nor use it. /dev/ttyS0 was the default location for it. Hope that this info can be useful to someone (fingers crossed) =) Mikko -- hibernate fails when not on AC power on HP Pavilion ZT3000 - regression from breezy https://launchpad.net/malone/bugs/35213 From mikko.s.saarinen at mbnet.fi Sat Apr 15 13:14:57 2006 From: mikko.s.saarinen at mbnet.fi (Mikko Saarinen) Date: Sat, 15 Apr 2006 13:14:57 -0000 Subject: [Bug 26376] Re: SiS 7012 chip Breezy: Sound works fine but volume can only be set to mute or 100% References: <20060113144913.21012.21453.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060415131458.16443.37441.malone@gandwana.ubuntu.com> I installed Dapper Flight 6 but somehow my sound is not working at all! I have an MSI S 250 notebook with this SIS SI7012 device. In Breezy the sound and the volume control worked. There was no sound from the speakers though, but when I inserted headphones I could hear the sound - only that it was very weak even at 100%. Now my lspci looks like this: 0000:00:00.0 Host bridge: Silicon Integrated Systems [SiS] 661FX/M661FX/M661MX Host (rev 11) 0000:00:01.0 PCI bridge: Silicon Integrated Systems [SiS] SiS AGP Port (virtual PCI-to-PCI bridge) 0000:00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS963 [MuTIOL Media IO] (rev 25) 0000:00:02.1 SMBus: Silicon Integrated Systems [SiS] SiS961/2 SMBus Controller 0000:00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] 0000:00:02.6 Modem: Silicon Integrated Systems [SiS] AC'97 Modem Controller (rev a0) 0000:00:02.7 Multimedia audio controller: Silicon Integrated Systems [SiS] Sound Controller (rev a0) 0000:00:03.0 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 0f) 0000:00:03.1 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 0f) 0000:00:03.3 USB Controller: Silicon Integrated Systems [SiS] USB 2.0 Controller 0000:00:04.0 Ethernet controller: Silicon Integrated Systems [SiS] SiS900 PCI Fast Ethernet (rev 90) 0000:00:09.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev ac) 0000:00:09.1 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev ac) 0000:00:09.2 FireWire (IEEE 1394): Ricoh Co Ltd R5C552 IEEE 1394 Controller (rev 04) 0000:00:0e.0 Network controller: RaLink Ralink RT2500 802.11 Cardbus Reference Card (rev 01) 0000:01:00.0 VGA compatible controller: Silicon Integrated Systems [SiS] 661/741/760/761 PCI/AGP VGA Display Adapter And in the device control screen I can see that my Sound Controller is SiS SI7012. lsmod | grep sis: sis900 25152 0 mii 6176 1 sis900 i2c_sis96x 5860 0 i2c_core 22848 2 i2c_acpi_ec,i2c_sis96x sis_agp 9028 1 agpgart 36784 1 sis_agp sis5513 17320 1 lsmod | grep snd snd_intel8x0 35516 0 snd_ac97_codec 99776 1 snd_intel8x0 snd_ac97_bus 2400 1 snd_ac97_codec snd_pcm_oss 56448 0 snd_mixer_oss 20544 1 snd_pcm_oss snd_pcm 96644 3 snd_intel8x0,snd_ac97_codec,snd_pcm_oss snd_timer 26884 1 snd_pcm snd 60004 6 snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer soundcore 10784 1 snd snd_page_alloc 11304 2 snd_intel8x0,snd_pcm Don't know if this is in gstreamer 0.10 or in the sis module, but the volume control in Gnome panel says there are no correct plugins or devices found. I can't seem to find the Multimedia Setup from the menu (was under System in Breezy) so I'm a bit lost for the moment. Mikko -- SiS 7012 chip Breezy: Sound works fine but volume can only be set to mute or 100% https://launchpad.net/malone/bugs/26376 From draimus at gmail.com Sat Apr 15 13:25:28 2006 From: draimus at gmail.com (draimus) Date: Sat, 15 Apr 2006 13:25:28 -0000 Subject: [Bug 36998] Re: Flight 5 Kernel Won't Boot on an IBM Thinkpad R30 References: <20060328130330.20514.53400.malonedeb@gangotri.ubuntu.com> Message-ID: <20060415132528.16443.85216.malone@gandwana.ubuntu.com> I attempted to install Breezy this morning on my R30 (with a swapped HD) so I could run the entire battery of Laptop tests against it. The installer hung trying to load the ide-cd module, no errors given after several minutes of waiting. "irqpoll" for breezy causes a system reset. Its seems only the Live CDs work. -- Flight 5 Kernel Won't Boot on an IBM Thinkpad R30 https://launchpad.net/malone/bugs/36998 From mikko.s.saarinen at mbnet.fi Sat Apr 15 13:27:13 2006 From: mikko.s.saarinen at mbnet.fi (Mikko Saarinen) Date: Sat, 15 Apr 2006 13:27:13 -0000 Subject: [Bug 26376] Re: SiS 7012 chip Dapper - works. References: <20060113144913.21012.21453.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060415132713.1627.53088.malone@gangotri.ubuntu.com> Hah. My problem was insufficient rights for the user! So there was no problem with this chip or its drivers. I granted my user rights to do all the stuff mentioned in the User Admin tool and although there was no mention of sound it started to work after logout. Still no sound from the internal speakers though, but the volume control does work gradually for me. Mikko -- SiS 7012 chip Breezy: Sound works fine but volume can only be set to mute or 100% https://launchpad.net/malone/bugs/26376 From gm-launchpad at tmueller.com Sat Apr 15 13:45:02 2006 From: gm-launchpad at tmueller.com (Thomas Mueller) Date: Sat, 15 Apr 2006 13:45:02 -0000 Subject: [Bug 27746] Re: Kernel oopses on IO References: <20060113151904.29386.8473.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060415134502.16492.1910.malone@gandwana.ubuntu.com> Hi, I did a fresh Dapper Install, everything is rock solid. linux-image-2.6.15-19-k7 (2.6.15-19.29) -- Kernel oopses on IO https://launchpad.net/malone/bugs/27746 From martin.bergner at online.de Sat Apr 15 14:06:35 2006 From: martin.bergner at online.de (Martin Bergner) Date: Sat, 15 Apr 2006 14:06:35 -0000 Subject: [Bug 35213] Re: hibernate fails when not on AC power on HP Pavilion ZT3000 - regression from breezy References: <20060316170910.6510.54248.malonedeb@gangotri.ubuntu.com> Message-ID: <20060415140635.1627.15724.malone@gangotri.ubuntu.com> I can confirm that it's due to laptop-mode, without it, it suspended as expected -- hibernate fails when not on AC power on HP Pavilion ZT3000 - regression from breezy https://launchpad.net/malone/bugs/35213 From dennis at kaarsemaker.net Sat Apr 15 15:19:56 2006 From: dennis at kaarsemaker.net (Dennis Kaarsemaker) Date: Sat, 15 Apr 2006 15:19:56 -0000 Subject: [Bug 27746] Re: Kernel oopses on IO References: <20060113151904.29386.8473.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060415151956.16492.65877.malone@gandwana.ubuntu.com> Good to hear! I'm marking this one as fixed, please reopen if the problem occurs again. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Needs Info => Fix Released -- Kernel oopses on IO https://launchpad.net/malone/bugs/27746 From obovgn at tiscali.it Sat Apr 15 16:02:18 2006 From: obovgn at tiscali.it (Oboro) Date: Sat, 15 Apr 2006 16:02:18 -0000 Subject: [Bug 34209] Re: 2.6.15-17-k7 doesn't boot on Athlon 2000+ References: <20060309134308.29403.37559.malonedeb@gangotri.ubuntu.com> Message-ID: <20060415160218.1627.9971.malone@gangotri.ubuntu.com> had the same with my Athlon 2000+ on an ASUS A7N266-VM. After installation of Kubuntu Dapper Drake flight 6 (kernel: 2.6.15.19-386) when it's time to boot the system for the first time, stoppes booting after: booting 'Ubuntu, kernel 2.6.15-19-386 root .... kernel.... initrid.... savedefault boot ....here stoppes I've tried with Ubuntu 6.0.6, and had the same thing. -- 2.6.15-17-k7 doesn't boot on Athlon 2000+ https://launchpad.net/malone/bugs/34209 From stelian at popies.net Sat Apr 15 16:13:32 2006 From: stelian at popies.net (stelian) Date: Sat, 15 Apr 2006 16:13:32 -0000 Subject: [Bug 39307] Re: Sonypi motioneye camera not recognized References: <20060412145624.15436.52451.malonedeb@gangotri.ubuntu.com> Message-ID: <20060415161332.16443.40532.malone@gandwana.ubuntu.com> No, there is no way to make it work right now. The clear route to make it work is to ask MicroVision for programming documentation. They may be willing to disclose those (maybe under NDA - in this case be careful that the NDA does allow writing GPL code). They you can write the driver yourself - or find a kernel developer willing to do it for you. -- Sonypi motioneye camera not recognized https://launchpad.net/malone/bugs/39307 From avilella at gmail.com Sat Apr 15 16:41:52 2006 From: avilella at gmail.com (Albert Vilella) Date: Sat, 15 Apr 2006 16:41:52 -0000 Subject: [Bug 39307] Re: Sonypi motioneye camera not recognized References: <20060412145624.15436.52451.malonedeb@gangotri.ubuntu.com> Message-ID: <20060415164152.1684.72671.malone@gangotri.ubuntu.com> So Sony has nothing to do with this? Contacting MicroVision would be enough? I am certainly not able to write the driver by myself. I don't know what kind of money would it take to have someone do this. By the way, Stelian: you seem like the man for the job here. -- Sonypi motioneye camera not recognized https://launchpad.net/malone/bugs/39307 From avilella at gmail.com Sat Apr 15 16:53:28 2006 From: avilella at gmail.com (Albert Vilella) Date: Sat, 15 Apr 2006 16:53:28 -0000 Subject: [Bug 39307] Re: Sonypi motioneye camera not recognized References: <20060412145624.15436.52451.malonedeb@gangotri.ubuntu.com> Message-ID: <20060415165328.1627.1627.malone@gangotri.ubuntu.com> So Sony has nothing to do with this? Contacting MicroVision would be enough? I am certainly not able to write the driver by myself. I don't know what kind of money would it take to have someone do this. By the way, Stelian: you seem like the man for the job here. -- Sonypi motioneye camera not recognized https://launchpad.net/malone/bugs/39307 From stelian at popies.net Sat Apr 15 17:02:41 2006 From: stelian at popies.net (stelian) Date: Sat, 15 Apr 2006 17:02:41 -0000 Subject: [Bug 39307] Re: Sonypi motioneye camera not recognized References: <20060412145624.15436.52451.malonedeb@gangotri.ubuntu.com> Message-ID: <20060415170241.1627.91425.malone@gangotri.ubuntu.com> Sony woudn't agree on releasing any documentation anyway. Believe me, I've tried very hard. The manufacturer is most of the time more friendly. If their agreement with Sony doesn't prohibit them from distributing the docs, they can probably be persuaded to release them. There are many kernel developers that will love to write such a driver, for zero money. The only problem is that it's quite difficult to write it without having access to the hardware. So you'll have to either find out a kernel developer already having this laptop or wanting to buy one or maybe you (with others) can buy such a laptop to a kernel developer who will write the driver in exchange. I for one I'm very happy with my Apple laptop for now. -- Sonypi motioneye camera not recognized https://launchpad.net/malone/bugs/39307 From dennis at kaarsemaker.net Sat Apr 15 17:06:11 2006 From: dennis at kaarsemaker.net (Dennis Kaarsemaker) Date: Sat, 15 Apr 2006 17:06:11 -0000 Subject: [Bug 39353] Re: [Bug 39353] Wireless don't work in my laptop References: <20060412221249.31677.83944.malonedeb@gandwana.ubuntu.com> Message-ID: <1145120771.5473.49.camel@mirage> If you want to use ndiswrapper, you will need to blacklist bcm43xx. This is not a bug. If you need help with this, please file a support request. status Rejected ** Changed in: ndiswrapper (Ubuntu) Status: Unconfirmed => Rejected -- Wireless don't work in my laptop https://launchpad.net/malone/bugs/39353 From mdz at ubuntu.com Sat Apr 15 17:51:59 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Sat, 15 Apr 2006 17:51:59 -0000 Subject: [Bug 17589] Re: System clock runs far too fast References: <20060113135219.21012.1755.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060415175159.1684.31752.launchpad@gangotri.ubuntu.com> ** Bug watch added: Linux Kernel Bug Tracker #5038 http://bugzilla.kernel.org/show_bug.cgi?id=5038 ** Also affects: linux (upstream) via http://bugzilla.kernel.org/show_bug.cgi?id=5038 Severity: Unknown Priority: Unknown Status: Unknown -- System clock runs far too fast https://launchpad.net/malone/bugs/17589 From mikko.s.saarinen at mbnet.fi Sat Apr 15 18:36:20 2006 From: mikko.s.saarinen at mbnet.fi (Mikko Saarinen) Date: Sat, 15 Apr 2006 18:36:20 -0000 Subject: [Bug 39639] Re: Hibernate, suspend, sleep... clarification needed References: <20060415105835.1627.17573.malonedeb@gangotri.ubuntu.com> Message-ID: <20060415183620.1627.64257.malone@gangotri.ubuntu.com> Why are we not using names like Standby? It is widely used in all electronics and is easily understood. In Finnish I would call it Valmiustila. -- Hibernate, suspend, sleep... clarification needed https://launchpad.net/malone/bugs/39639 From dmutters at gmail.com Sat Apr 15 20:15:40 2006 From: dmutters at gmail.com (DaneM) Date: Sat, 15 Apr 2006 20:15:40 -0000 Subject: [Bug 31842] Re: ACPI kills parallel printer support. (Kernel bug, but has workaround) References: <20060218012345.795.33064.malonedeb@gandwana.ubuntu.com> Message-ID: <20060415201540.16492.49234.malone@gandwana.ubuntu.com> I just tried printing yesterday with kernel 2.6.15-20-amd64-generic, and found that it's broken again. :-( I don't print much from Ubuntu, so I'm not sure if kernel 2.6.15-19-amd64-generic also has the problem. -- ACPI kills parallel printer support. (Kernel bug, but has workaround) https://launchpad.net/malone/bugs/31842 From dennis at kaarsemaker.net Sat Apr 15 21:10:28 2006 From: dennis at kaarsemaker.net (Dennis Kaarsemaker) Date: Sat, 15 Apr 2006 21:10:28 -0000 Subject: [Bug 34209] Re: [Bug 34209] Re: 2.6.15-17-k7 doesn't boot on Athlon 2000+ References: <20060309134308.29403.37559.malonedeb@gangotri.ubuntu.com> <20060415160218.1627.9971.malone@gangotri.ubuntu.com> Message-ID: <1145135428.5473.71.camel@mirage> On za, 2006-04-15 at 16:02 +0000, Oboro wrote: > After installation of Kubuntu Dapper Drake flight 6 (kernel: > 2.6.15.19-386) Hi, Ben asked for tests with the latest kernel. Please try a daily iso or wait for beta 5 (scheduled april 20). -- Dennis K. - Linux for human beings - http://www.ubuntu.com - Linux voor iedereen - http://www.ubuntu-nl.org -- 2.6.15-17-k7 doesn't boot on Athlon 2000+ https://launchpad.net/malone/bugs/34209 From paul5082 at sio.midco.net Sat Apr 15 22:01:56 2006 From: paul5082 at sio.midco.net (Paul Sharp) Date: Sat, 15 Apr 2006 22:01:56 -0000 Subject: [Bug 35624] Re: [bcm43xx] Broadcom BCM4306 wireless - unable to connect References: <20060319184821.12254.30538.malonedeb@gandwana.ubuntu.com> Message-ID: <20060415220156.16492.79006.malone@gandwana.ubuntu.com> 2.6.15-20 did allow it to work! Thank-you. Just a couple of (possibly) bugs - instead of showing a wireless icon when the network monitor shows, it shows a standard NIC icon, and when either rebooting or first start, in order to get the wireless to work, I need to go into Networking, disable the wireless, and re-enable it, and then it works fine. -- [bcm43xx] Broadcom BCM4306 wireless - unable to connect https://launchpad.net/malone/bugs/35624 From dennis at kaarsemaker.net Sat Apr 15 23:39:26 2006 From: dennis at kaarsemaker.net (Dennis Kaarsemaker) Date: Sat, 15 Apr 2006 23:39:26 -0000 Subject: [Bug 39138] Re: [Bug 39138] Re: PCI resource errors and unable to reboot system References: <20060411132552.24486.98960.malonedeb@gangotri.ubuntu.com> <20060413162353.13165.87887.malone@gandwana.ubuntu.com> Message-ID: <1145144366.5473.100.camel@mirage> Check the left column :) -- PCI resource errors and unable to reboot system https://launchpad.net/malone/bugs/39138 From dennis at kaarsemaker.net Sat Apr 15 23:37:22 2006 From: dennis at kaarsemaker.net (Dennis Kaarsemaker) Date: Sat, 15 Apr 2006 23:37:22 -0000 Subject: [Bug 36487] Re: [Bug 36487] Re: kernel compile fails with zd1211 errors References: <20060324210845.6253.76477.malonedeb@gandwana.ubuntu.com> <20060411071732.32313.16969.malone@gandwana.ubuntu.com> Message-ID: <1145144242.5473.98.camel@mirage> On di, 2006-04-11 at 07:17 +0000, casualprogrammer wrote: > Would it not make sense to make the installation of the linux-source > dependent on linux-devel and all the rest being needed for a kernel > build ? No, that's the job of the build dependencies, try sudo apt-get build-dep linux-source-2.6.15 -- Dennis K. - Linux for human beings - http://www.ubuntu.com - Linux voor iedereen - http://www.ubuntu-nl.org -- kernel compile fails with zd1211 errors https://launchpad.net/malone/bugs/36487 From dennis at kaarsemaker.net Sat Apr 15 23:53:43 2006 From: dennis at kaarsemaker.net (Dennis Kaarsemaker) Date: Sat, 15 Apr 2006 23:53:43 -0000 Subject: [Bug 36673] Re: Can't Compile Kernele References: <20060326042518.6253.77920.malonedeb@gandwana.ubuntu.com> Message-ID: <20060415235343.16492.83627.malone@gandwana.ubuntu.com> apt-get build-dep linux-source-2.6.15 ** Changed in: Ubuntu Status: Unconfirmed => Rejected -- Can't Compile Kernele https://launchpad.net/malone/bugs/36673 From msoulier at digitaltorque.ca Sun Apr 16 02:29:27 2006 From: msoulier at digitaltorque.ca (Michael P. Soulier) Date: Sun, 16 Apr 2006 02:29:27 -0000 Subject: [Bug 18285] Re: APM resume fails under 2.6.10, works under 2.6.8.1? References: <20060113135537.21012.98627.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060416022927.16492.82421.malone@gandwana.ubuntu.com> Correction, it works some of the time. I'm using 2.6.12 from Breezy now, and it usually unsuspends, but not all of the time. I have not yet found a pattern to the failures. I suppose this should be reopened. -- APM resume fails under 2.6.10, works under 2.6.8.1? https://launchpad.net/malone/bugs/18285 From jaymohn at lycos.com Sun Apr 16 06:09:33 2006 From: jaymohn at lycos.com (beefsprocket) Date: Sun, 16 Apr 2006 06:09:33 -0000 Subject: [Bug 34831] Hardlock of entire system (Dapper Flight 5) References: <20060314003317.30057.9117.malonedeb@gandwana.ubuntu.com> Message-ID: <20060416060933.16443.25568.launchpad@canonical@gandwana.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Major Priority: (none set) Assignee: Ubuntu Audio Team Status: Confirmed Description: rosegarden4_1.0-1.2ubuntu1_i386.deb in Dapper Flight 5 locks the entire system. SSH and ping show that the computer is unresponsive and a hard reboot is required. Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Major Priority: (none set) Assignee: Ubuntu Audio Team Status: Confirmed Description: rosegarden4_1.0-1.2ubuntu1_i386.deb in Dapper Flight 5 locks the entire system. SSH and ping show that the computer is unresponsive and a hard reboot is required. -- Hardlock of entire system (Dapper Flight 5) https://launchpad.net/malone/bugs/34831 From crimsun at fungus.sh.nu Sun Apr 16 06:08:16 2006 From: crimsun at fungus.sh.nu (Daniel T. Chen) Date: Sun, 16 Apr 2006 06:08:16 -0000 Subject: [Bug 34831] Re: Hardlock of entire system (Dapper Flight 5) References: <20060314003317.30057.9117.malonedeb@gandwana.ubuntu.com> Message-ID: <20060416060816.1684.8692.malone@gangotri.ubuntu.com> Tracking http://marc.theaimsgroup.com/?l=linux-kernel&m=114515779700238&w=2 Looks like the mpu401 fixes need to be propagated. ** Changed in: rosegarden4 (Ubuntu) Status: Needs Info => Confirmed ** Changed in: rosegarden4 (Ubuntu) Sourcepackagename: rosegarden4 => linux-source-2.6.15 Binarypackagename: rosegarden4 => None -- Hardlock of entire system (Dapper Flight 5) https://launchpad.net/malone/bugs/34831 From www at saepia.net Sun Apr 16 07:53:44 2006 From: www at saepia.net (saepia) Date: Sun, 16 Apr 2006 07:53:44 -0000 Subject: [Bug 23040] Re: Modem sagem 800 doesn't work. References: <20060113142135.21012.11862.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060416075344.16443.83937.malone@gandwana.ubuntu.com> To solve this problem in Ubuntu 5.10, you should 1. Install all necessary utils for compiling programs (gcc-3.4!) 2. Download driver from http://download.gna.org/eagleusb/eagle-usb-2.3.0/eagle-usb-2.3.3.tar.bz2 3. cd /usr/bin 3. rm gcc 4. ln -s gcc-3.4 gcc 5. Unpack driver somewhere 6. cd driver directory 7. ./configure 8. make 9. make install 10. plug modem 11. eagleconfig 12. wait for a while (eaglestat should report that modem is operational) 13. startadsl Problem generally lies in gcc version. Default ubuntu kernel is compiled with gcc-3.4, but default gcc ver in ubuntu 5.10 is gcc-4.0. Recompiling with proper gcc version solves that problem. In my opinion, there's should be official packages compiled with gcc-3.4 in ubuntu repository. There are really MANY users (e.g in Poland where 2 major ISPs uses Sagem Fast 800) which have problem with it. If I would make packages, how I can sumbit it to ubuntu? If you are interested in making official package, please contact me at marcin (at) saepia (dot) net -- Modem sagem 800 doesn't work. https://launchpad.net/malone/bugs/23040 From dennis at kaarsemaker.net Sun Apr 16 09:21:19 2006 From: dennis at kaarsemaker.net (Dennis Kaarsemaker) Date: Sun, 16 Apr 2006 09:21:19 -0000 Subject: [Bug 38688] Re: [Bug 38688] Re: unable to boot References: <20060408070420.32313.56814.malonedeb@gandwana.ubuntu.com> <20060414123255.16443.27957.malone@gandwana.ubuntu.com> Message-ID: <1145179279.5473.116.camel@mirage> > The "kernel developers" are just really busy You really are a master in understatements. I'm not really being useful here, just wanted to say: keep up the good work! -- unable to boot https://launchpad.net/malone/bugs/38688 From ariel.elias at itmain.com.ar Sun Apr 16 09:35:32 2006 From: ariel.elias at itmain.com.ar (Ariel G. Elias) Date: Sun, 16 Apr 2006 09:35:32 -0000 Subject: [Bug 38186] Network card References: <20060405133220.25542.40324.malonedeb@gangotri.ubuntu.com> Message-ID: <20060416093532.1627.28433.launchpad@canonical@gangotri.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Confirmed Description: Hello, I don't know if I am in the right place, sorry if I'm not. I was trying Dapper flight 6 just yersterday, and I discovered a little bug. When the installer try to find out my network card, it can't do it. Ubuntu 5.10 works fine, but dapper can't detect my netwokd card. I have a motherboard ASUS P5GPL, and the on board network card is a Marvell Yukon 88E8053 PCI-E Gigabit Ethernet Controller. If you need some other information, please let me know. Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Confirmed Description: Hello, I don't know if I am in the right place, sorry if I'm not. I was trying Dapper flight 6 just yersterday, and I discovered a little bug. When the installer try to find out my network card, it can't do it. Ubuntu 5.10 works fine, but dapper can't detect my netwokd card. I have a motherboard ASUS P5GPL, and the on board network card is a Marvell Yukon 88E8053 PCI-E Gigabit Ethernet Controller. If you need some other information, please let me know. -- Network card https://launchpad.net/malone/bugs/38186 From cjwatson at canonical.com Sun Apr 16 09:35:31 2006 From: cjwatson at canonical.com (Colin Watson) Date: Sun, 16 Apr 2006 09:35:31 -0000 Subject: [Bug 38186] Re: Network card References: <20060405133220.25542.40324.malonedeb@gangotri.ubuntu.com> Message-ID: <20060416093531.1627.81710.launchpad@gangotri.ubuntu.com> ** Changed in: debian-installer (Ubuntu) Sourcepackagename: debian-installer => linux-source-2.6.15 -- Network card https://launchpad.net/malone/bugs/38186 From acornejo at ieee.org Sun Apr 16 09:40:31 2006 From: acornejo at ieee.org (Alejandro Cornejo) Date: Sun, 16 Apr 2006 09:40:31 -0000 Subject: [Bug 38688] Re: unable to boot References: <20060408070420.32313.56814.malonedeb@gandwana.ubuntu.com> Message-ID: <20060416094031.16443.65578.malone@gandwana.ubuntu.com> Sorry if I offended anyone with my last post, I didn't mean to. I never implied that anyone lost track of this bug, I just implied what my post said, refrasing: "They are probably too busy to fix this right now, because when people are busy they have to prioritize work, not because they think this bug is not important, but because human parallelism is not possible." Anyhow, I'm obviously not a kernel guru, but I AM an expirienced linux user/developer who is willing to help in anyway possible, so if there is anything I can do to help you out a little bit, please let me know (and it is a very REAL offer, i'm not joking). -- unable to boot https://launchpad.net/malone/bugs/38688 From dennis at kaarsemaker.net Sun Apr 16 10:03:38 2006 From: dennis at kaarsemaker.net (Dennis Kaarsemaker) Date: Sun, 16 Apr 2006 10:03:38 -0000 Subject: [Bug 16955] Re: cs: pcmcia_socket0: unable to apply power References: <20060113134906.21012.63580.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060416100338.16492.52648.malone@gandwana.ubuntu.com> No reason to believe it's fixed, so rejected is better. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Fix Released => Rejected -- cs: pcmcia_socket0: unable to apply power https://launchpad.net/malone/bugs/16955 From thomas.petazzoni at enix.org Sun Apr 16 10:01:17 2006 From: thomas.petazzoni at enix.org (Thomas Petazzoni) Date: Sun, 16 Apr 2006 10:01:17 -0000 Subject: [Bug 39748] Sound output is line in on ATI IXP cards References: <20060416100117.16492.54221.malonedeb@gandwana.ubuntu.com> Message-ID: <20060416100117.16492.54221.malonedeb@gandwana.ubuntu.com> Public bug reported: Affects: linux-source-2.6.12 kernel-image-2.6.12-9-386-di (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: On a system with an ATI IXP sound card, PCI id: 0000:00:14.5 Multimedia audio controller: ATI Technologies Inc IXP150 AC'97 Audio Controller the analog sound goes out through the line-in plug (pink connector) instead of the normal speaker plug (green connector). -- Sound output is line in on ATI IXP cards https://launchpad.net/malone/bugs/39748 From ktogias at math.upatras.gr Sun Apr 16 10:50:23 2006 From: ktogias at math.upatras.gr (Konstantinos Togias) Date: Sun, 16 Apr 2006 10:50:23 -0000 Subject: [Bug 16955] Re: cs: pcmcia_socket0: unable to apply power References: <20060113134906.21012.63580.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060416105023.16443.96436.malone@gandwana.ubuntu.com> I have the same problem with Breezy (2.6.12-10-686 kernel) on an Acer Aspire 1692WLMi Laptop. When I insert a pcmcia2usb2 card into the slot I get [4296263.848000] cs: pcmcia_socket0: unable to apply power. at dmesg and the card does not work. I attach the output of dmesg, lshw, lspci and lsmod. ** Attachment added: "Output of dmesg command" http://librarian.launchpad.net/2124913/dmesg.txt ** Attachment added: "Output of lshw command" http://librarian.launchpad.net/2124914/lshw.txt ** Attachment added: "Output of lsmod -vv command" http://librarian.launchpad.net/2124915/lsmod.txt ** Attachment added: "Output of lspci -vv command" http://librarian.launchpad.net/2124916/lspci.txt -- cs: pcmcia_socket0: unable to apply power https://launchpad.net/malone/bugs/16955 From ubuntu-bugs at henrik.synth.no Sun Apr 16 11:08:42 2006 From: ubuntu-bugs at henrik.synth.no (neu) Date: Sun, 16 Apr 2006 11:08:42 -0000 Subject: [Bug 34068] Linksys WPC54G v2 works! References: <20060308120049.10830.52259.malonedeb@gandwana.ubuntu.com> Message-ID: <20060416110842.16492.47010.malone@gandwana.ubuntu.com> My Linksys WPC54G v2 works with this fix as well. I first stumbled upon the fix here: http://www.ubuntuforums.org/archive/index.php/t-75448.html cd /lib/firmware/`uname -r`/acx/ sudo mv tiacx111c16 tiacx111c16.old sudo ln -s ../1.2.0.30/tiacx111c16 tiacx111c16 sudo rmmod acx sudo modprobe acx -- USR5410 not working https://launchpad.net/malone/bugs/34068 From ktogias at math.upatras.gr Sun Apr 16 11:05:19 2006 From: ktogias at math.upatras.gr (Konstantinos Togias) Date: Sun, 16 Apr 2006 11:05:19 -0000 Subject: [Bug 16955] Re: cs: pcmcia_socket0: unable to apply power References: <20060113134906.21012.63580.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060416110519.16492.38304.malone@gandwana.ubuntu.com> When the laptop is booted with the pcmcia card inserted, the card works properly. -- cs: pcmcia_socket0: unable to apply power https://launchpad.net/malone/bugs/16955 From robertc at robertcollins.net Sun Apr 16 11:12:06 2006 From: robertc at robertcollins.net (Robert Collins) Date: Sun, 16 Apr 2006 11:12:06 -0000 Subject: [Bug 34209] Re: 2.6.15-17-k7 doesn't boot on Athlon 2000+ References: <20060309134308.29403.37559.malonedeb@gangotri.ubuntu.com> Message-ID: <20060416111206.1627.1625.malone@gangotri.ubuntu.com> I have a similar problem/symptoms. I have an Athlon 3000+ I think, It appears to hand, booting with quiet it stops at Begin: Waiting for root file system... ... I have an lvm partition with evms - root is /dev/evms/lvm2/roblvm/root. Running evms_activate after the timeout populates /dev/evms (which was empty - no .nodes - except for a 'dm' file). -- 2.6.15-17-k7 doesn't boot on Athlon 2000+ https://launchpad.net/malone/bugs/34209 From dennis at kaarsemaker.net Sun Apr 16 11:13:04 2006 From: dennis at kaarsemaker.net (Dennis Kaarsemaker) Date: Sun, 16 Apr 2006 11:13:04 -0000 Subject: [Bug 36986] Re: [Bug 36986] Re: [Bug 36986] Re: [Breezy] skge bogus sensor References: <20060328113707.20484.27403.malonedeb@gangotri.ubuntu.com> <20060411004022.24516.75717.malone@gangotri.ubuntu.com> <443B0DFD.3030705@lognet.com.br> Message-ID: <1145185984.5473.152.camel@mirage> > By the way, the Dapper Kernel works fine.... no SKGE sensor bug! Then we can call this fixed - unless you think the error is serious enough to warrant a fix in breezy. Please reopen in that case. status FixReleased ** Changed in: linux-image-2.6.12-10-386 (Ubuntu) Status: Rejected => Fix Released -- [Breezy] skge bogus sensor https://launchpad.net/malone/bugs/36986 From ktogias at math.upatras.gr Sun Apr 16 11:25:14 2006 From: ktogias at math.upatras.gr (Konstantinos Togias) Date: Sun, 16 Apr 2006 11:25:14 -0000 Subject: [Bug 16955] Re: cs: pcmcia_socket0: unable to apply power References: <20060113134906.21012.63580.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060416112514.16443.99757.malone@gandwana.ubuntu.com> Also after booting the laptop with the card already inserted, if I remove and after a while re-insert the card, the card works properly. I attach the output of dmesg regarding the insertion of the card after having booted with it inserted and removed it. ** Attachment added: "Output of demsg when the inserted card works properly" http://librarian.launchpad.net/2124938/dmesg_cardworking.txt -- cs: pcmcia_socket0: unable to apply power https://launchpad.net/malone/bugs/16955 From dennis at kaarsemaker.net Sun Apr 16 11:49:55 2006 From: dennis at kaarsemaker.net (Dennis Kaarsemaker) Date: Sun, 16 Apr 2006 11:49:55 -0000 Subject: [Bug 36986] Re: [Breezy] skge bogus sensor References: <20060328113707.20484.27403.malonedeb@gangotri.ubuntu.com> Message-ID: <20060416114955.1684.45963.malone@gangotri.ubuntu.com> Launchpad needs a do-what-i-want command :) ** Changed in: linux-image-2.6.12-10-386 (Ubuntu) Status: Fix Released => Rejected ** Changed in: linux-source-2.6.12 (Ubuntu) Status: Unconfirmed => Fix Released -- [Breezy] skge bogus sensor https://launchpad.net/malone/bugs/36986 From dennis at kaarsemaker.net Sun Apr 16 12:04:49 2006 From: dennis at kaarsemaker.net (Dennis Kaarsemaker) Date: Sun, 16 Apr 2006 12:04:49 -0000 Subject: [Bug 16955] Re: cs: pcmcia_socket0: unable to apply power References: <20060113134906.21012.63580.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060416120449.16492.30156.malone@gandwana.ubuntu.com> Konstantinos: can you please test with the latest dapper kernel? A test with a daily live cd would be good enough :) -- cs: pcmcia_socket0: unable to apply power https://launchpad.net/malone/bugs/16955 From skauchali at gmail.com Sun Apr 16 12:11:03 2006 From: skauchali at gmail.com (shuttleworthwannabe) Date: Sun, 16 Apr 2006 12:11:03 -0000 Subject: [Bug 39138] Re: PCI resource errors and unable to reboot system References: <20060411132552.24486.98960.malonedeb@gangotri.ubuntu.com> Message-ID: <20060416121103.1684.54460.launchpad@gangotri.ubuntu.com> ** Attachment added: "Attachment: dmesg output" http://librarian.launchpad.net/2124951/dmesg -- PCI resource errors and unable to reboot system https://launchpad.net/malone/bugs/39138 From ktogias at math.upatras.gr Sun Apr 16 12:11:01 2006 From: ktogias at math.upatras.gr (Konstantinos Togias) Date: Sun, 16 Apr 2006 12:11:01 -0000 Subject: [Bug 16955] Re: cs: pcmcia_socket0: unable to apply power References: <20060113134906.21012.63580.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060416121101.16492.50453.malone@gandwana.ubuntu.com> I am a little confused. I am unable to reproduce the bug. It only happened once. After that either booting with the card inserted or not the card works. I also tested with dapper (kernel 2.6.15-20-386). The pcmcia card works properly. -- cs: pcmcia_socket0: unable to apply power https://launchpad.net/malone/bugs/16955 From jantonio.martin at gmail.com Sun Apr 16 12:54:07 2006 From: jantonio.martin at gmail.com (Jose Antonio Martin Prieto) Date: Sun, 16 Apr 2006 12:54:07 -0000 Subject: [Bug 32123] Re: initramfs not generated correctly on upgrade to Dapper References: <20060220130413.1427.33476.malonedeb@gangotri.ubuntu.com> Message-ID: <20060416125407.16443.44536.malone@gandwana.ubuntu.com> I'm having the same problem and have saved a copy of initrd.img-2.6.15-20-powerpc. Tell me how can I send the file, and I will send it. -- initramfs not generated correctly on upgrade to Dapper https://launchpad.net/malone/bugs/32123 From dennis at kaarsemaker.net Sun Apr 16 13:40:26 2006 From: dennis at kaarsemaker.net (Dennis Kaarsemaker) Date: Sun, 16 Apr 2006 13:40:26 -0000 Subject: [Bug 38473] Re: [Bug 38473] Re: [Bug 38473] Re: DWL-g650 not configurable References: <20060406190702.24516.69199.malonedeb@gangotri.ubuntu.com> <20060410143142.32233.28861.malone@gandwana.ubuntu.com> Message-ID: <1145194826.5473.173.camel@mirage> If you installed ubuntu, simply dist-upgrade. If you use a live system: download the latest daily. -- DWL-g650 not configurable https://launchpad.net/malone/bugs/38473 From unrandomsam at gmail.com Sun Apr 16 14:18:43 2006 From: unrandomsam at gmail.com (h3sp4wn) Date: Sun, 16 Apr 2006 14:18:43 -0000 Subject: [Bug 39771] PL2303 compatible usb device driver device id's References: <20060416141843.1627.25330.malonedeb@gangotri.ubuntu.com> Message-ID: <20060416141843.1627.25330.malonedeb@gangotri.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: Bus 001 Device 004: ID 0e55:110b Speed Dragon Multimedia, Ltd This is used in many mobile phone cables and enables gnokii / wammu / to work properly with compatible phones. The patch only consists of adding the relevant id's to pl2303.c and pl2303.h I have tested it. http://www.ussg.iu.edu/hypermail/linux/kernel/0602.3/1577.html Anything else you need to know tell me. -- PL2303 compatible usb device driver device id's https://launchpad.net/malone/bugs/39771 From romnes at stud.ntnu.no Sun Apr 16 14:53:54 2006 From: romnes at stud.ntnu.no (Skrot) Date: Sun, 16 Apr 2006 14:53:54 -0000 Subject: [Bug 34870] Re: ipw2200 repeatedly crashes. References: <20060314104909.30082.87848.malonedeb@gandwana.ubuntu.com> Message-ID: <20060416145355.1684.25635.malone@gangotri.ubuntu.com> @ante: My computer doesn't freeze untill I acctually enable the wlan card. And I've had 72 hours uptime as well, if it doesn't freeze within the 10 first minutes of the ipw2000 uptime it doesn't freeze at all, atleast for me. And yes, I've got my own kernel, from linux-source-2.6.15-20.30. This has to be ipw2200-related, because it never freeze unless wlan is enabled, and as I said, when it crashes it is within the 10 first minutes after enabling wlan. -- ipw2200 repeatedly crashes. https://launchpad.net/malone/bugs/34870 From gj at pointblue.com.pl Sun Apr 16 17:30:39 2006 From: gj at pointblue.com.pl (gregj) Date: Sun, 16 Apr 2006 17:30:39 -0000 Subject: [Bug 39792] adding FW harddrive causes this oops References: <20060416173039.1684.21536.malonedeb@gangotri.ubuntu.com> Message-ID: <20060416173039.1684.21536.malonedeb@gangotri.ubuntu.com> Public bug reported: Affects: linux-source-2.6.12 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: [4294711.743000] scsi0 : SCSI emulation for IEEE-1394 SBP-2 Devices [4294711.839000] input: PC Speaker [4294712.432000] ieee1394: Node changed: 0-02:1023 -> 0-00:1023 [4294712.505000] ieee1394: Node changed: 0-00:1023 -> 0-02:1023 [4294712.505000] ieee1394: The root node is not cycle master capable; selecting a new root node and resetting... [4294712.505000] ieee1394: unsolicited response packet received - no tlabel match [4294712.569000] Floppy drive(s): fd0 is 1.44M [4294712.582000] FDC 0 is a post-1991 82077 [4294712.842000] ieee1394: Node changed: 0-02:1023 -> 0-01:1023 [4294712.842000] ieee1394: Node changed: 0-01:1023 -> 0-02:1023 [4294712.842000] ieee1394: unsolicited response packet received - no tlabel match [4294712.855000] ieee1394: sbp2: Error logging into SBP-2 device - login timed-out [4294712.858000] sbp2: probe of 0050770e40000cbb-0 failed with error -16 [4294712.943000] ieee1394: sbp2: Error reconnecting to SBP-2 device - reconnect timed-out [4294712.943000] Unable to handle kernel paging request at virtual address 00180019 [4294712.943000] printing eip: [4294712.943000] d8c79df0 [4294712.943000] *pde = 00000000 [4294712.943000] Oops: 0002 [#1] [4294712.943000] Modules linked in: floppy sbp2 pcspkr scsi_mod rtc ohci1394 ieee1394 tpm_nsc tpm_atmel tpm pci_hotplug hw_random intel_agp agpgart dm_mod evdev psmouse mousedev parport_pc lp parport md reiserfs thermal processor fan e100 mii uhci_hcd usbcore ide_cd cdrom ide_disk ide_generic piix ide_core unix fbcon tileblit font bitblit vesafb cfbcopyarea cfbimgblt cfbfillrect softcursor capability commoncap [4294712.943000] CPU: 0 [4294712.943000] EIP: 0060:[] Not tainted VLI [4294712.943000] EFLAGS: 00010282 (2.6.12-10-386) [4294712.943000] EIP is at sbp2_logout_device+0x11/0x12a [sbp2] [4294712.943000] eax: 00180019 ebx: d7c0e1c0 ecx: d71fbf58 edx: d7c0e1c0 [4294712.943000] esi: d1593d78 edi: d1ad0e00 ebp: 00000003 esp: d71fbf60 [4294712.943000] ds: 007b es: 007b ss: 0068 [4294712.943000] Process knodemgrd_0 (pid: 4662, threadinfo=d71fa000 task=d7d5fae0) [4294712.943000] Stack: d71fbf58 d71fbf58 d7c0e1c0 d1ad0c00 d8c793da d7c0e1c0 d1ad0cf0 d8b86d0b [4294712.943000] d1ad0c00 d1ad0e00 d19d6cf8 d1ad0e40 d8b86d96 d1ad0e00 d1ad0ef8 d19d6cf8 [4294712.943000] 00000003 d1ad8000 d8b86deb d19d6cf8 d1ad0e00 00000003 d19d6cf8 d1ad8000 [4294712.943000] Call Trace: [4294712.943000] [] sbp2_update+0x1c/0x68 [sbp2] [4294712.943000] [] nodemgr_update_pdrv+0x4a/0x89 [ieee1394] [4294712.943000] [] nodemgr_probe_ne+0x4c/0x67 [ieee1394] [4294712.943000] [] nodemgr_node_probe+0x3a/0x68 [ieee1394] [4294712.943000] [] nodemgr_host_thread+0xe9/0x11c [ieee1394] [4294712.943000] [] nodemgr_host_thread+0x0/0x11c [ieee1394] [4294712.943000] [] kernel_thread_helper+0x5/0xb [4294712.943000] Code: c1 89 56 64 89 4e 60 68 0e b6 c7 d8 e8 2c ba 49 e7 31 c0 5b 5a 59 5b 5e 5f c3 56 53 51 51 8b 5c 24 14 8b 43 30 8b b3 a8 00 00 00 00 00 00 00 00 8b 43 30 c7 40 04 00 00 00 00 8b 43 30 c7 40 lspci: 000:00:00.0 Host bridge: Intel Corp. 82815 815 Chipset Host Bridge and Memory Controller Hub (rev 02) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- TAbort- SERR- TAbort- SERR- Reset- FastB2B- 0000:00:1f.0 ISA bridge: Intel Corp. 82801BA ISA Bridge (LPC) (rev 01) Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- Message-ID: <20060416175742.16492.49215.malone@gandwana.ubuntu.com> Hi, can you give more information on what you did and if you can reproduce the error? ** Changed in: linux-source-2.6.15 linux-image-2.6.15-20-amd64-k8 (Ubuntu) Status: Unconfirmed => Needs Info -- kernel bug https://launchpad.net/malone/bugs/39643 From zulcss at gmail.com Sun Apr 16 18:42:28 2006 From: zulcss at gmail.com (ChuckShort) Date: Sun, 16 Apr 2006 18:42:28 -0000 Subject: [Bug 39771] Re: PL2303 compatible usb device driver device id's References: <20060416141843.1627.25330.malonedeb@gangotri.ubuntu.com> Message-ID: <20060416184228.16443.9602.malone@gandwana.ubuntu.com> Patch already sent. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Unconfirmed => Fix Committed -- PL2303 compatible usb device driver device id's https://launchpad.net/malone/bugs/39771 From jmsunseri at gmail.com Sun Apr 16 18:46:55 2006 From: jmsunseri at gmail.com (Justin Sunseri) Date: Sun, 16 Apr 2006 18:46:55 -0000 Subject: [Bug 34066] Re: usb mouse dead on resume References: <20060308112717.14318.84205.malonedeb@gangotri.ubuntu.com> Message-ID: <20060416184655.1627.69225.malone@gangotri.ubuntu.com> i experience this same issue on my lenovo 3000 n100. the mouse always works when coming back from a suspend but does not work when coming back from a hibernate after the system has been suspended. Un-plugging and replugging the mouse resolves the issue. -- usb mouse dead on resume https://launchpad.net/malone/bugs/34066 From mb.spam at gmx.net Sun Apr 16 20:07:36 2006 From: mb.spam at gmx.net (markus) Date: Sun, 16 Apr 2006 20:07:36 -0000 Subject: [Bug 24047] Re: [Bug 24047] Re: No networking with Intel PRO/100 nor with Cisco Airo References: <20060113142703.21012.54209.launchpad@macquarie.warthogs.hbd.com> <20060414052710.1627.64415.malone@gangotri.ubuntu.com> Message-ID: <200604162107.37797.mb.spam@gmx.net> Hi! I just gave it a try. The Cisco Airo works fine now (although the KDE wifi stuff does not work properly, but this has nothing to do with this bugreport). On the other hand, eepro100 does not work for me. Happy easter, thank you, Markus! On Friday 14 April 2006 06:27, Carthik Sharma wrote: > Hi Markus, > > Thank you for reporting this bug. > > Can you please try using the latest Dapper (flight 6 or later) Kernel and > packages and see if the problem persists? > > Thank you. -- No networking with Intel PRO/100 nor with Cisco Airo https://launchpad.net/malone/bugs/24047 From roland.lezuo at chello.at Sun Apr 16 21:07:53 2006 From: roland.lezuo at chello.at (iroli) Date: Sun, 16 Apr 2006 21:07:53 -0000 Subject: [Bug 39800] bcm43xx looses connection after 1 min References: <20060416194508.1627.69286.malonedeb@gangotri.ubuntu.com> Message-ID: <20060416210753.16443.75124.launchpad@canonical@gandwana.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: When set the essid via iwconfig and get an ipadress via dhclient the connection stays stable for about 1 minute. After that time no packages can be sent/received until I set the essid again (and dhclient again). >From dmesg: [ 1805.523637] eth2: no IPv6 routers present [ 1888.889357] DEAUTH from AP [ 1888.890480] DEAUTH from AP [ 1888.890490] SoftMAC: Recieved deauthentication packet from 00:0f:66:c8:6d:d7, but that network is unknown. [ 1895.452424] SoftMAC: Open Authentication completed with 00:0f:66:c8:6d:d7 [ 2000.523670] DEAUTH from AP [ 2000.524890] DEAUTH from AP [ 2000.524900] SoftMAC: Recieved deauthentication packet from 00:0f:66:c8:6d:d7, but that network is unknown. [ 2007.092441] SoftMAC: Open Authentication completed with 00:0f:66:c8:6d:d7 Note: the original reporter indicated the bug was in package 'linux-image-2.6.15-15-powerpc'; however, that package was not published in Ubuntu. Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: When set the essid via iwconfig and get an ipadress via dhclient the connection stays stable for about 1 minute. After that time no packages can be sent/received until I set the essid again (and dhclient again). >From dmesg: [ 1805.523637] eth2: no IPv6 routers present [ 1888.889357] DEAUTH from AP [ 1888.890480] DEAUTH from AP [ 1888.890490] SoftMAC: Recieved deauthentication packet from 00:0f:66:c8:6d:d7, but that network is unknown. [ 1895.452424] SoftMAC: Open Authentication completed with 00:0f:66:c8:6d:d7 [ 2000.523670] DEAUTH from AP [ 2000.524890] DEAUTH from AP [ 2000.524900] SoftMAC: Recieved deauthentication packet from 00:0f:66:c8:6d:d7, but that network is unknown. [ 2007.092441] SoftMAC: Open Authentication completed with 00:0f:66:c8:6d:d7 Note: the original reporter indicated the bug was in package 'linux-image-2.6.15-15-powerpc'; however, that package was not published in Ubuntu. -- bcm43xx looses connection after 1 min https://launchpad.net/malone/bugs/39800 From dennis at kaarsemaker.net Sun Apr 16 21:07:53 2006 From: dennis at kaarsemaker.net (Dennis Kaarsemaker) Date: Sun, 16 Apr 2006 21:07:53 -0000 Subject: [Bug 39800] Re: bcm43xx looses connection after 1 min References: <20060416194508.1627.69286.malonedeb@gangotri.ubuntu.com> Message-ID: <20060416210753.16443.25509.launchpad@gandwana.ubuntu.com> ** Changed in: Ubuntu Sourcepackagename: None => linux-source-2.6.15 -- bcm43xx looses connection after 1 min https://launchpad.net/malone/bugs/39800 From rkimber at ntlworld.com Sun Apr 16 21:22:47 2006 From: rkimber at ntlworld.com (Rkimber) Date: Sun, 16 Apr 2006 21:22:47 -0000 Subject: [Bug 39643] Re: kernel bug References: <20060415110931.16492.62907.malonedeb@gandwana.ubuntu.com> Message-ID: <20060416212247.1627.82292.malone@gangotri.ubuntu.com> I'm afraid I can't give much more info. This happened overnight when the machine was running unattended, and the machine had crashed when I got to it in the morning. There's nothing in syslog for the previous 5 hours. There are some basic things that run overnight, like fetchmail, ntpdate, logcheck, and smartmontools does a short check of one of the disks at around 3.00 (it reports the disk is OK) FWIW, I'm finding that the generic kernel seems to offer more stability than the K8 one (even though I have a dual opteron). I'm using the former again right now. -- kernel bug https://launchpad.net/malone/bugs/39643 From sergey.udaltsov at gmail.com Sun Apr 16 21:59:13 2006 From: sergey.udaltsov at gmail.com (Sergey V. Udaltsov) Date: Sun, 16 Apr 2006 21:59:13 -0000 Subject: [Bug 32394] Re: weird interaction between headphone detect and auto mute on iBook G4 (snapper/tumbler) References: <20060221234042.31322.68245.malonedeb@gangotri.ubuntu.com> Message-ID: <20060416215913.16443.62806.malone@gandwana.ubuntu.com> The workaround with "Auto Mute" does not work for me at all :(( -- weird interaction between headphone detect and auto mute on iBook G4 (snapper/tumbler) https://launchpad.net/malone/bugs/32394 From hramrach at centrum.cz Sun Apr 16 22:21:05 2006 From: hramrach at centrum.cz (Michal Suchanek) Date: Sun, 16 Apr 2006 22:21:05 -0000 Subject: [Bug 38859] Re: The boot CD does not work on Cyrix References: <20060409115532.32233.49614.malonedeb@gandwana.ubuntu.com> Message-ID: <20060416222105.1627.38560.launchpad@gangotri.ubuntu.com> ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Needs Info => Rejected -- The boot CD does not work on Cyrix https://launchpad.net/malone/bugs/38859 From pcboardneo at free.fr Mon Apr 17 09:50:51 2006 From: pcboardneo at free.fr (Neo-MatriX) Date: Mon, 17 Apr 2006 09:50:51 -0000 Subject: [Bug 34351] Re: Pinnacle PCTV Rave saa7134 References: <20060310194801.17018.83828.malonedeb@gangotri.ubuntu.com> Message-ID: <20060417095051.1627.19193.malone@gangotri.ubuntu.com> I have the same problmen but not the same tuner card, i use Instant TV PCI by ADS Tech (chips saa7133 but driver use is saa7134) dmesg : [4294667.296000] Linux version 2.6.15-20-386 (buildd at vernadsky) (gcc version 4.0.3 (Ubuntu 4.0.3-1ubuntu3)) #1 PREEMPT Tue Apr 4 17:48:51 UTC 2006 [4294667.296000] BIOS-provided physical RAM map: [4294667.296000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [4294667.296000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [4294667.296000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [4294667.296000] BIOS-e820: 0000000000100000 - 000000003fff0000 (usable) [4294667.296000] BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS) [4294667.296000] BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data) [4294667.296000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [4294667.296000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [4294667.296000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) [4294667.296000] 127MB HIGHMEM available. [4294667.296000] 896MB LOWMEM available. [4294667.296000] found SMP MP-table at 000f5710 [4294667.296000] On node 0 totalpages: 262128 [4294667.296000] DMA zone: 4096 pages, LIFO batch:0 [4294667.296000] DMA32 zone: 0 pages, LIFO batch:0 [4294667.296000] Normal zone: 225280 pages, LIFO batch:31 [4294667.296000] HighMem zone: 32752 pages, LIFO batch:7 [4294667.296000] DMI 2.2 present. [4294667.296000] ACPI: RSDP (v000 KT600 ) @ 0x000f7120 [4294667.296000] ACPI: RSDT (v001 KT600 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff3000 [4294667.296000] ACPI: FADT (v001 KT600 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff3040 [4294667.296000] ACPI: MADT (v001 KT600 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff7fc0 [4294667.296000] ACPI: DSDT (v001 KT600 AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x00000000 [4294667.296000] ACPI: PM-Timer IO Port: 0x4008 [4294667.296000] ACPI: Local APIC address 0xfee00000 [4294667.296000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [4294667.296000] Processor #0 6:8 APIC version 16 [4294667.296000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [4294667.296000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [4294667.296000] IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23 [4294667.296000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [4294667.296000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 dfl dfl) [4294667.296000] ACPI: IRQ0 used by override. [4294667.296000] ACPI: IRQ2 used by override. [4294667.296000] ACPI: IRQ9 used by override. [4294667.296000] Enabling APIC mode: Flat. Using 1 I/O APICs [4294667.296000] Using ACPI (MADT) for SMP configuration information [4294667.296000] Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000) [4294667.296000] Built 1 zonelists [4294667.296000] Kernel command line: root=/dev/hda2 ro quiet splash [4294667.296000] mapped APIC to ffffd000 (fee00000) [4294667.296000] mapped IOAPIC to ffffc000 (fec00000) [4294667.296000] Initializing CPU#0 [4294667.296000] PID hash table entries: 4096 (order: 12, 65536 bytes) [4294667.296000] Detected 1831.205 MHz processor. [4294667.296000] Using pmtmr for high-res timesource [4294667.296000] Console: colour VGA+ 80x25 [4294667.539000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [4294667.540000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [4294667.573000] Memory: 1029068k/1048512k available (1973k kernel code, 18708k reserved, 601k data, 288k init, 131008k highmem) [4294667.573000] Checking if this processor honours the WP bit even in supervisor mode... Ok. [4294667.634000] Calibrating delay using timer specific routine.. 3664.37 BogoMIPS (lpj=1832185) [4294667.634000] Security Framework v1.0.0 initialized [4294667.634000] SELinux: Disabled at boot. [4294667.634000] Mount-cache hash table entries: 512 [4294667.634000] CPU: After generic identify, caps: 0383fbff c1cbfbff 00000000 00000000 00000000 00000000 00000000 [4294667.634000] CPU: After vendor identify, caps: 0383fbff c1cbfbff 00000000 00000000 00000000 00000000 00000000 [4294667.634000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [4294667.634000] CPU: L2 Cache: 256K (64 bytes/line) [4294667.634000] CPU: After all inits, caps: 0383fbff c1cbfbff 00000000 00000020 00000000 00000000 00000000 [4294667.634000] mtrr: v2.0 (20020519) [4294667.634000] CPU: AMD Sempron(tm) 2600+ stepping 01 [4294667.634000] Enabling fast FPU save and restore... done. [4294667.634000] Enabling unmasked SIMD FPU exception support... done. [4294667.634000] Checking 'hlt' instruction... OK. [4294667.638000] checking if image is initramfs... it is [4294668.186000] Freeing initrd memory: 6387k freed [4294668.199000] ACPI: Looking for DSDT ... not found! [4294668.214000] ENABLING IO-APIC IRQs [4294668.214000] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [4294668.325000] NET: Registered protocol family 16 [4294668.325000] EISA bus registered [4294668.325000] ACPI: bus type pci registered [4294668.326000] PCI: PCI BIOS revision 2.10 entry at 0xfbac0, last bus=1 [4294668.326000] PCI: Using configuration type 1 [4294668.326000] ACPI: Subsystem revision 20051216 [4294668.331000] ACPI: Interpreter enabled [4294668.331000] ACPI: Using IOAPIC for interrupt routing [4294668.331000] ACPI: PCI Root Bridge [PCI0] (0000:00) [4294668.331000] PCI: Probing PCI hardware (bus 00) [4294668.332000] ACPI: Assume root bridge [\_SB_.PCI0] bus is 0 [4294668.336000] Boot video device is 0000:01:00.0 [4294668.336000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [4294668.377000] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 10 11 12) *5 [4294668.378000] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 *11 12) [4294668.378000] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 *11 12) [4294668.379000] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12) *0, disabled. [4294668.379000] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12) *0, disabled. [4294668.379000] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12) *0, disabled. [4294668.380000] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 6 7 10 11 12) *0, disabled. [4294668.380000] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 6 7 10 11 12) *0, disabled. [4294668.380000] ACPI: PCI Interrupt Link [ALKA] (IRQs 20) *0, disabled. [4294668.381000] ACPI: PCI Interrupt Link [ALKB] (IRQs 21) *0, disabled. [4294668.381000] ACPI: PCI Interrupt Link [ALKC] (IRQs 22) *0, disabled. [4294668.382000] ACPI: PCI Interrupt Link [ALKD] (IRQs 23) *0, disabled. [4294668.385000] Linux Plug and Play Support v0.97 (c) Adam Belay [4294668.385000] pnp: PnP ACPI init [4294668.391000] pnp: PnP ACPI: found 14 devices [4294668.391000] PnPBIOS: Disabled by ACPI PNP [4294668.391000] PCI: Using ACPI for IRQ routing [4294668.391000] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [4294668.418000] pnp: 00:01: ioport range 0x4000-0x407f could not be reserved [4294668.418000] pnp: 00:01: ioport range 0x5000-0x500f has been reserved [4294668.418000] PCI: Bridge: 0000:00:01.0 [4294668.418000] IO window: d000-dfff [4294668.418000] MEM window: e8000000-e80fffff [4294668.418000] PREFETCH window: c0000000-dfffffff [4294668.418000] PCI: Setting latency timer of device 0000:00:01.0 to 64 [4294668.418000] audit: initializing netlink socket (disabled) [4294668.418000] audit(1145273310.417:1): initialized [4294668.418000] highmem bounce pool size: 64 pages [4294668.418000] VFS: Disk quotas dquot_6.5.1 [4294668.418000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [4294668.418000] Initializing Cryptographic API [4294668.418000] io scheduler noop registered [4294668.418000] io scheduler anticipatory registered [4294668.418000] io scheduler deadline registered [4294668.418000] io scheduler cfq registered [4294668.418000] PCI: Bypassing VIA 8237 APIC De-Assert Message [4294668.419000] isapnp: Scanning for PnP cards... [4294668.775000] isapnp: No Plug & Play device found [4294668.788000] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [4294668.788000] PNP: PS/2 controller doesn't have AUX irq; using default 12 [4294668.789000] serio: i8042 AUX port at 0x60,0x64 irq 12 [4294668.789000] serio: i8042 KBD port at 0x60,0x64 irq 1 [4294668.789000] Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled [4294668.789000] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [4294668.789000] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [4294668.790000] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [4294668.791000] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [4294668.791000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [4294668.791000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [4294668.791000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [4294668.791000] ACPI: bus type ide registered [4294668.791000] mice: PS/2 mouse device common for all mice [4294668.792000] EISA: Probing bus 0 at eisa.0 [4294668.792000] Cannot allocate resource for EISA slot 4 [4294668.792000] Cannot allocate resource for EISA slot 5 [4294668.792000] EISA: Detected 0 cards. [4294668.792000] NET: Registered protocol family 2 [4294668.802000] IP route cache hash table entries: 65536 (order: 6, 262144 bytes) [4294668.802000] TCP established hash table entries: 262144 (order: 8, 1048576 bytes) [4294668.804000] TCP bind hash table entries: 65536 (order: 6, 262144 bytes) [4294668.805000] TCP: Hash tables configured (established 262144 bind 65536) [4294668.805000] TCP reno registered [4294668.805000] TCP bic registered [4294668.805000] NET: Registered protocol family 1 [4294668.805000] NET: Registered protocol family 8 [4294668.805000] NET: Registered protocol family 20 [4294668.805000] Using IPI Shortcut mode [4294668.805000] ACPI wakeup devices: [4294668.805000] SLPB PCI0 USB0 USB1 USB2 USB6 USB7 USB8 USB9 LAN0 UAR1 LPT1 [4294668.805000] ACPI: (supports S0 S1 S4 S5) [4294668.805000] Freeing unused kernel memory: 288k freed [4294668.839000] input: AT Translated Set 2 keyboard as /class/input/input0 [4294668.875000] vga16fb: initializing [4294668.875000] vga16fb: mapped to 0xc00a0000 [4294668.971000] Console: switching to colour frame buffer device 80x25 [4294668.971000] fb0: VGA16 VGA frame buffer device [4294670.092000] Capability LSM initialized [4294670.123000] ACPI: Fan [FAN] (on) [4294670.127000] ACPI: CPU0 (power states: C1[C1] C2[C2]) [4294670.129000] ACPI: Thermal Zone [THRM] (44 C) [4294670.678000] SCSI subsystem initialized [4294670.679000] libata version 1.20 loaded. [4294670.681000] sata_via 0000:00:0f.0: version 1.1 [4294670.681000] **** SET: Misaligned resource pointer: df8baae2 Type 07 Len 0 [4294670.682000] ACPI: PCI Interrupt Link [ALKA] BIOS reported IRQ 0, using IRQ 20 [4294670.682000] ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 20 [4294670.682000] ACPI: PCI Interrupt 0000:00:0f.0[B] -> Link [ALKA] -> GSI 20 (level, low) -> IRQ 169 [4294670.682000] PCI: Via IRQ fixup for 0000:00:0f.0, from 11 to 9 [4294670.682000] sata_via 0000:00:0f.0: routed to hard irq line 9 [4294670.682000] ata1: SATA max UDMA/133 cmd 0xE100 ctl 0xE202 bmdma 0xE500 irq 169 [4294670.682000] ata2: SATA max UDMA/133 cmd 0xE300 ctl 0xE402 bmdma 0xE508 irq 169 [4294671.037000] ata1: dev 0 cfg 49:2f00 82:3069 83:7c01 84:4003 85:3868 86:3c01 87:4003 88:203f [4294671.037000] ata1: dev 0 ATA-7, max UDMA/100, 78165360 sectors: LBA48 [4294671.037000] ata1: dev 0 configured for UDMA/100 [4294671.037000] scsi0 : sata_via [4294671.238000] ata2: no device found (phy stat 00000000) [4294671.238000] scsi1 : sata_via [4294671.238000] Vendor: ATA Model: SAMSUNG SP0411C Rev: UU10 [4294671.238000] Type: Direct-Access ANSI SCSI revision: 05 [4294671.248000] SCSI device sda: 78165360 512-byte hdwr sectors (40021 MB) [4294671.248000] SCSI device sda: drive cache: write back [4294671.249000] SCSI device sda: 78165360 512-byte hdwr sectors (40021 MB) [4294671.250000] SCSI device sda: drive cache: write back [4294671.250000] sda: sda1 [4294671.257000] sd 0:0:0:0: Attached scsi disk sda [4294671.401000] VP_IDE: IDE controller at PCI slot 0000:00:0f.1 [4294671.401000] ACPI: PCI Interrupt 0000:00:0f.1[A] -> Link [ALKA] -> GSI 20 (level, low) -> IRQ 169 [4294671.401000] PCI: Via IRQ fixup for 0000:00:0f.1, from 255 to 9 [4294671.401000] VP_IDE: chipset revision 6 [4294671.401000] VP_IDE: not 100% native mode: will probe irqs later [4294671.401000] VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.1 [4294671.401000] ide0: BM-DMA at 0xe700-0xe707, BIOS settings: hda:DMA, hdb:pio [4294671.401000] ide1: BM-DMA at 0xe708-0xe70f, BIOS settings: hdc:pio, hdd:pio [4294671.402000] Probing IDE interface ide0... [4294671.788000] hda: Maxtor 6Y120P0, ATA DISK drive [4294672.400000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [4294672.400000] Probing IDE interface ide1... [4294673.194000] hdc: TSSTcorpCD/DVDW SH-W162C, ATAPI CD/DVD-ROM drive [4294673.908000] hdd: SAMSUNG CDRW/DVD SM-352B, ATAPI CD/DVD-ROM drive [4294673.959000] ide1 at 0x170-0x177,0x376 on irq 15 [4294673.976000] hda: max request size: 128KiB [4294673.976000] hdc: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33) [4294673.976000] Uniform CD-ROM driver Revision: 3.20 [4294673.990000] hda: 240121728 sectors (122942 MB) w/7936KiB Cache, CHS=65535/16/63, UDMA(133) [4294673.991000] hda: cache flushes supported [4294673.991000] hda:<6>hdd: ATAPI 52X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33) [4294673.998000] hda1 hda2 hda3 < hda5 > [4294674.282000] usbcore: registered new driver usbfs [4294674.283000] usbcore: registered new driver hub [4294674.284000] USB Universal Host Controller Interface driver v2.3 [4294674.285000] **** SET: Misaligned resource pointer: dfa24802 Type 07 Len 0 [4294674.285000] ACPI: PCI Interrupt Link [ALKB] BIOS reported IRQ 0, using IRQ 21 [4294674.285000] ACPI: PCI Interrupt Link [ALKB] enabled at IRQ 21 [4294674.285000] ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 177 [4294674.285000] PCI: Via IRQ fixup for 0000:00:10.0, from 5 to 1 [4294674.285000] uhci_hcd 0000:00:10.0: UHCI Host Controller [4294674.286000] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1 [4294674.286000] uhci_hcd 0000:00:10.0: irq 177, io base 0x0000e800 [4294674.286000] hub 1-0:1.0: USB hub found [4294674.286000] hub 1-0:1.0: 2 ports detected [4294674.387000] ACPI: PCI Interrupt 0000:00:10.1[A] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 177 [4294674.387000] PCI: Via IRQ fixup for 0000:00:10.1, from 5 to 1 [4294674.387000] uhci_hcd 0000:00:10.1: UHCI Host Controller [4294674.387000] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2 [4294674.387000] uhci_hcd 0000:00:10.1: irq 177, io base 0x0000e900 [4294674.387000] hub 2-0:1.0: USB hub found [4294674.387000] hub 2-0:1.0: 2 ports detected [4294674.488000] ACPI: PCI Interrupt 0000:00:10.2[B] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 177 [4294674.488000] PCI: Via IRQ fixup for 0000:00:10.2, from 11 to 1 [4294674.488000] uhci_hcd 0000:00:10.2: UHCI Host Controller [4294674.488000] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3 [4294674.488000] uhci_hcd 0000:00:10.2: irq 177, io base 0x0000ea00 [4294674.488000] hub 3-0:1.0: USB hub found [4294674.488000] hub 3-0:1.0: 2 ports detected [4294674.589000] ACPI: PCI Interrupt 0000:00:10.3[B] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 177 [4294674.589000] PCI: Via IRQ fixup for 0000:00:10.3, from 11 to 1 [4294674.589000] uhci_hcd 0000:00:10.3: UHCI Host Controller [4294674.589000] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4 [4294674.589000] uhci_hcd 0000:00:10.3: irq 177, io base 0x0000eb00 [4294674.589000] hub 4-0:1.0: USB hub found [4294674.589000] hub 4-0:1.0: 2 ports detected [4294674.693000] ACPI: PCI Interrupt 0000:00:10.4[C] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 177 [4294674.693000] PCI: Via IRQ fixup for 0000:00:10.4, from 11 to 1 [4294674.693000] ehci_hcd 0000:00:10.4: EHCI Host Controller [4294674.693000] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 5 [4294674.693000] ehci_hcd 0000:00:10.4: irq 177, io mem 0xe8102000 [4294674.693000] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [4294674.693000] hub 5-0:1.0: USB hub found [4294674.693000] hub 5-0:1.0: 8 ports detected [4294674.843000] Attempting manual resume [4294674.869000] EXT3-fs: mounted filesystem with ordered data mode. [4294674.885000] kjournald starting. Commit interval 5 seconds [4294675.839000] usb 2-1: new low speed USB device using uhci_hcd and address 2 [4294676.217000] usb 2-2: new full speed USB device using uhci_hcd and address 3 [4294683.233000] sd 0:0:0:0: Attached scsi generic sg0 type 0 [4294685.492000] Linux video capture interface: v1.00 [4294685.523000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [4294685.526000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [4294685.568000] 8139too Fast Ethernet driver 0.9.27 [4294685.568000] ACPI: PCI Interrupt 0000:00:09.0[A] -> GSI 17 (level, low) -> IRQ 185 [4294685.568000] eth0: RealTek RTL8139 at 0xf88a8000, 00:08:54:1b:27:21, IRQ 185 [4294685.568000] eth0: Identified 8139 chip type 'RTL-8100B/8139D' [4294685.582000] 8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004) [4294685.590000] Linux agpgart interface v0.101 (c) Dave Jones [4294685.593000] agpgart: Detected VIA KT400/KT400A/KT600 chipset [4294685.601000] agpgart: AGP aperture is 128M @ 0xe0000000 [4294685.687000] saa7130/34: v4l2 driver version 0.2.14 loaded [4294685.687000] ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 18 (level, low) -> IRQ 193 [4294685.687000] saa7133[0]: found at 0000:00:0a.0, rev: 208, irq: 193, latency: 32, mmio: 0xe8101000 [4294685.687000] saa7133[0]: subsystem: 1421:0003, board: UNKNOWN/GENERIC [card=0,autodetected] [4294685.687000] saa7133[0]: board init: gpio is 40 [4294685.808000] saa7133[0]: i2c eeprom 00: 21 14 03 00 10 28 ff ff ff ff ff ff ff ff ff ff [4294685.808000] saa7133[0]: i2c eeprom 10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [4294685.808000] saa7133[0]: i2c eeprom 20: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [4294685.808000] saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [4294685.808000] saa7133[0]: i2c eeprom 40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [4294685.808000] saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [4294685.808000] saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [4294685.808000] saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [4294685.808000] saa7133[0]: registered device video0 [v4l2] [4294685.808000] saa7133[0]: registered device vbi0 [4294686.154000] Real Time Clock Driver v1.12 [4294686.193000] via-rhine.c:v1.10-LK1.2.0-2.6 June-10-2004 Written by Donald Becker [4294686.193000] **** SET: Misaligned resource pointer: dfae40a2 Type 07 Len 0 [4294686.194000] ACPI: PCI Interrupt Link [ALKD] BIOS reported IRQ 0, using IRQ 23 [4294686.194000] ACPI: PCI Interrupt Link [ALKD] enabled at IRQ 23 [4294686.194000] ACPI: PCI Interrupt 0000:00:12.0[A] -> Link [ALKD] -> GSI 23 (level, low) -> IRQ 201 [4294686.194000] PCI: Via IRQ fixup for 0000:00:12.0, from 5 to 9 [4294686.198000] eth1: VIA Rhine II at 0x1ed00, 00:04:61:65:7a:dd, IRQ 201. [4294686.198000] eth1: MII PHY found at address 1, status 0x7849 advertising 05e1 Link 0000. [4294686.223000] saa7134 ALSA driver for DMA sound loaded [4294686.223000] saa7133[0]/alsa: saa7133[0] at 0xe8101000 irq 193 registered as card -1 [4294686.245000] input: PC Speaker as /class/input/input1 [4294686.271000] via82xx: Assuming DXS channels with 48k fixed sample rate. [4294686.271000] Please try dxs_support=5 option [4294686.271000] and report if it works on your machine. [4294686.271000] For more details, read ALSA-Configuration.txt. [4294686.271000] **** SET: Misaligned resource pointer: f7c2e6c2 Type 07 Len 0 [4294686.272000] ACPI: PCI Interrupt Link [ALKC] BIOS reported IRQ 0, using IRQ 22 [4294686.272000] ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22 [4294686.272000] ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [ALKC] -> GSI 22 (level, low) -> IRQ 209 [4294686.272000] PCI: Via IRQ fixup for 0000:00:11.5, from 11 to 1 [4294686.272000] PCI: Setting latency timer of device 0000:00:11.5 to 64 [4294686.417000] parport: PnPBIOS parport detected. [4294686.417000] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [4294686.607000] FDC 0 is a post-1991 82077 [4294687.185000] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [4294687.359000] usb 2-2: reset full speed USB device using uhci_hcd and address 3 [4294687.484000] usbcore: registered new driver speedtch [4294687.485000] usbcore: registered new driver hiddev [4294687.505000] input: A4Tech USB Optical Mouse as /class/input/input2 [4294687.505000] input: USB HID v1.10 Mouse [A4Tech USB Optical Mouse] on usb-0000:00:10.1-1 [4294687.505000] usbcore: registered new driver usbhid [4294687.505000] drivers/usb/input/hid-core.c: v2.6:USB HID core driver [4294687.531000] speedtch 2-2:1.0: no stage 1 firmware found! [4294687.532000] ts: Compaq touchscreen protocol output [4294687.884000] Intel ISA PCIC probe: not found. [4294688.038000] lp0: using parport0 (interrupt-driven). [4294688.126000] Adding 3028212k swap on /dev/hda5. Priority:-1 extents:1 across:3028212k [4294688.218000] NET: Registered protocol family 17 [4294688.263000] EXT3 FS on hda2, internal journal [4294688.508000] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 [4294688.508000] md: bitmap version 4.39 [4294689.027000] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel at redhat.com [4294692.738000] NET: Registered protocol family 10 [4294692.738000] lo: Disabled Privacy Extensions [4294692.739000] IPv6 over IPv4 tunneling driver [4294694.699000] cdrom: open failed. [4294695.084000] NTFS driver 2.1.25 [Flags: R/O MODULE]. [4294695.121000] NTFS volume version 3.1. [4294695.147000] NTFS volume version 3.1. [4294696.797000] UDP: bad checksum. From 82.211.81.145:123 to 192.168.0.1:32768 ulen 56 [4294697.822000] ACPI: Power Button (FF) [PWRF] [4294697.822000] ACPI: Power Button (CM) [PWRB] [4294697.822000] ACPI: Sleep Button (CM) [SLPB] [4294697.930000] ibm_acpi: ec object not found [4294697.955000] pcc_acpi: loading... [4294703.658000] eth0: no IPv6 routers present [4294704.076000] [drm] Initialized drm 1.0.0 20040925 [4294704.082000] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 217 [4294704.082000] [drm] Initialized radeon 1.19.0 20050911 on minor 0: [4294705.019000] agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0. [4294705.019000] agpgart: Putting AGP V3 device at 0000:00:00.0 into 4x mode [4294705.019000] agpgart: Putting AGP V3 device at 0000:01:00.0 into 4x mode [4294705.836000] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac) [4294705.836000] apm: overridden by ACPI. [4294705.972000] ip_tables: (C) 2000-2002 Netfilter core team [4294706.011000] Netfilter messages via NETLINK v0.30. [4294706.018000] ip_conntrack version 2.4 (8191 buckets, 65528 max) - 232 bytes per conntrack [4294706.783000] hdc: drive_cmd: status=0x51 { DriveReady SeekComplete Error } [4294706.783000] hdc: drive_cmd: error=0x04 { AbortedCommand } [4294706.783000] ide: failed opcode was: 0xec [4294706.801000] hdd: drive_cmd: status=0x51 { DriveReady SeekComplete Error } [4294706.801000] hdd: drive_cmd: error=0x04 { AbortedCommand } [4294706.801000] ide: failed opcode was: 0xec [4294706.822000] hdc: drive_cmd: status=0x51 { DriveReady SeekComplete Error } [4294706.822000] hdc: drive_cmd: error=0x04 { AbortedCommand } [4294706.822000] ide: failed opcode was: 0xec [4294706.843000] hdd: drive_cmd: status=0x51 { DriveReady SeekComplete Error } [4294706.843000] hdd: drive_cmd: error=0x04 { AbortedCommand } [4294706.843000] ide: failed opcode was: 0xec [4294708.594000] Installing knfsd (copyright (C) 1996 okir at monad.swb.de). [4294709.021000] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory [4294709.021000] NFSD: recovery directory /var/lib/nfs/v4recovery doesn't exist [4294709.022000] NFSD: starting 90-second grace period [4294709.461000] [drm] Loading R300 Microcode [4294710.562000] Bluetooth: Core ver 2.8 [4294710.562000] NET: Registered protocol family 31 [4294710.562000] Bluetooth: HCI device and connection manager initialized [4294710.562000] Bluetooth: HCI socket layer initialized [4294710.626000] Bluetooth: L2CAP ver 2.8 [4294710.626000] Bluetooth: L2CAP socket layer initialized [4294710.638000] Bluetooth: RFCOMM socket layer initialized [4294710.639000] Bluetooth: RFCOMM TTY layer initialized [4294710.639000] Bluetooth: RFCOMM ver 1.7 [4294728.774000] ISO 9660 Extensions: Microsoft Joliet Level 3 [4294728.886000] ISOFS: changing to secondary root [4294819.598000] Inbound IN=eth0 OUT= MAC=00:08:54:1b:27:21:00:07:cb:08:b0:a7:08:00 SRC=199.249.181.23 DST=192.168.0.1 LEN=48 TOS=0x00 PREC=0x00 TTL=114 ID=17391 DF PROTO=TCP SPT=64960 DPT=4662 WINDOW=65535 RES=0x00 SYN URGP=0 [4294822.640000] Inbound IN=eth0 OUT= MAC=00:08:54:1b:27:21:00:07:cb:08:b0:a7:08:00 SRC=199.249.181.23 DST=192.168.0.1 LEN=48 TOS=0x00 PREC=0x00 TTL=114 ID=19854 DF PROTO=TCP SPT=64960 DPT=4662 WINDOW=65535 RES=0x00 SYN URGP=0 [4294830.169000] Inbound IN=eth0 OUT= MAC=00:08:54:1b:27:21:00:07:cb:08:b0:a7:08:00 SRC=62.241.53.2 DST=192.168.0.1 LEN=48 TOS=0x00 PREC=0x00 TTL=51 ID=54156 DF PROTO=TCP SPT=16437 DPT=4662 WINDOW=5840 RES=0x00 SYN URGP=0 [4294836.171000] Inbound IN=eth0 OUT= MAC=00:08:54:1b:27:21:00:07:cb:08:b0:a7:08:00 SRC=62.241.53.2 DST=192.168.0.1 LEN=48 TOS=0x00 PREC=0x00 TTL=51 ID=54157 DF PROTO=TCP SPT=16437 DPT=4662 WINDOW=5840 RES=0x00 SYN URGP=0 [4294876.168000] Inbound IN=eth0 OUT= MAC=00:08:54:1b:27:21:00:07:cb:08:b0:a7:08:00 SRC=82.238.60.222 DST=192.168.0.1 LEN=55 TOS=0x00 PREC=0x00 TTL=120 ID=2409 PROTO=UDP SPT=4672 DPT=4672 LEN=35 [4295169.118000] Inbound IN=eth0 OUT= MAC=00:08:54:1b:27:21:00:07:cb:08:b0:a7:08:00 SRC=64.34.161.177 DST=192.168.0.1 LEN=60 TOS=0x00 PREC=0x00 TTL=51 ID=53100 DF PROTO=TCP SPT=54390 DPT=4662 WINDOW=5840 RES=0x00 SYN URGP=0 [4295172.116000] Inbound IN=eth0 OUT= MAC=00:08:54:1b:27:21:00:07:cb:08:b0:a7:08:00 SRC=64.34.161.177 DST=192.168.0.1 LEN=60 TOS=0x00 PREC=0x00 TTL=51 ID=53102 DF PROTO=TCP SPT=54390 DPT=4662 WINDOW=5840 RES=0x00 SYN URGP=0 [4295186.819000] Inbound IN=eth0 OUT= MAC=00:08:54:1b:27:21:00:07:cb:08:b0:a7:08:00 SRC=64.34.165.204 DST=192.168.0.1 LEN=60 TOS=0x00 PREC=0x00 TTL=50 ID=31786 DF PROTO=TCP SPT=51396 DPT=4662 WINDOW=5840 RES=0x00 SYN URGP=0 [4295291.739000] Inbound IN=eth0 OUT= MAC=00:08:54:1b:27:21:00:07:cb:08:b0:a7:08:00 SRC=172.211.75.65 DST=192.168.0.1 LEN=55 TOS=0x00 PREC=0x00 TTL=113 ID=10882 PROTO=UDP SPT=7890 DPT=4672 LEN=35 -- Pinnacle PCTV Rave saa7134 https://launchpad.net/malone/bugs/34351 From pcboardneo at free.fr Mon Apr 17 09:52:14 2006 From: pcboardneo at free.fr (Neo-MatriX) Date: Mon, 17 Apr 2006 09:52:14 -0000 Subject: [Bug 34351] Re: Pinnacle PCTV Rave saa7134 References: <20060310194801.17018.83828.malonedeb@gangotri.ubuntu.com> Message-ID: <20060417095214.16443.95982.malone@gandwana.ubuntu.com> and my lspci : 0000:00:00.0 Host bridge: VIA Technologies, Inc. VT8377 [KT400/KT600 AGP] Host Bridge (rev 80) 0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI Bridge 0000:00:09.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) 0000:00:0a.0 Multimedia controller: Philips Semiconductors SAA7133 Video Broadcast Decoder (rev d0) 0000:00:0f.0 IDE interface: VIA Technologies, Inc. VIA VT6420 SATA RAID Controller (rev 80) 0000:00:0f.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06) 0000:00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81) 0000:00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81) 0000:00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81) 0000:00:10.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81) 0000:00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 86) 0000:00:11.0 ISA bridge: VIA Technologies, Inc. VT8237 ISA bridge [KT600/K8T800/K8T890 South] 0000:00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 60) 0000:00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 78) 0000:01:00.0 VGA compatible controller: ATI Technologies Inc RV350 AP [Radeon 9600] 0000:01:00.1 Display controller: ATI Technologies Inc RV350 AP [Radeon 9600] (Secondary) -- Pinnacle PCTV Rave saa7134 https://launchpad.net/malone/bugs/34351 From igor.bukanov at gmail.com Mon Apr 17 13:15:20 2006 From: igor.bukanov at gmail.com (Igor Bukanov) Date: Mon, 17 Apr 2006 13:15:20 -0000 Subject: [Bug 14277] Re: Hang while loading snd-nm256 module References: <20060113133547.21012.82495.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060417131520.1627.33392.malone@gangotri.ubuntu.com> The bug still happens with Dapper Flight 6 and Breezy final on my Sony Vaio PCG-Z505R notebook. As with reports above system freezes after modprobe snd-nm256 modprobe snd-nm256 reset_workaround=1 force_ac97=1 vaio_hack=1 and different combinations. But during the first boot right after installation the sound is available and works fine. Note that the bug present in Fedora Core 4 with all the updated kernels there including 2.6.16. -- Hang while loading snd-nm256 module https://launchpad.net/malone/bugs/14277 From mdz at ubuntu.com Mon Apr 17 15:05:20 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Mon, 17 Apr 2006 15:05:20 -0000 Subject: [Bug 36849] Re: initrd creation error ignored => unbootable system References: <20060327135223.6279.11012.malonedeb@gandwana.ubuntu.com> Message-ID: <20060417150520.1684.27132.launchpad@gangotri.ubuntu.com> ** Changed in: initramfs-tools (Ubuntu) Target: None => ubuntu-6.06 -- initrd creation error ignored => unbootable system https://launchpad.net/malone/bugs/36849 From mdz at ubuntu.com Mon Apr 17 15:10:00 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Mon, 17 Apr 2006 15:10:00 -0000 Subject: [Bug 32123] Re: initramfs not generated correctly on upgrade to Dapper References: <20060220130413.1427.33476.malonedeb@gangotri.ubuntu.com> Message-ID: <20060417151000.16492.20559.malone@gandwana.ubuntu.com> Click on "Add attachment" on the left side of the page -- initramfs not generated correctly on upgrade to Dapper https://launchpad.net/malone/bugs/32123 From launch at mailinator.com Mon Apr 17 15:19:39 2006 From: launch at mailinator.com (anonym) Date: Mon, 17 Apr 2006 15:19:39 -0000 Subject: [Bug 35866] live cd can not mount root filesystem References: <20060321135538.16673.15124.malonedeb@gandwana.ubuntu.com> Message-ID: <20060417151939.1627.4679.launchpad@canonical@gangotri.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Minor Priority: (none set) Status: Needs Info Description: the current dapper flight 5 live cd crashes while mounting the filesystem. after a long string of error messages, I am presented with a root shell. vertical lines are present in the usplash logo and text, spaced at approximately every 20 pixels. i'm running on a Dell inspiron 8200. Breezy works without issue, but also displays vertical line distortions during usplash. Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Minor Priority: (none set) Status: Needs Info Description: the current dapper flight 5 live cd crashes while mounting the filesystem. after a long string of error messages, I am presented with a root shell. vertical lines are present in the usplash logo and text, spaced at approximately every 20 pixels. i'm running on a Dell inspiron 8200. Breezy works without issue, but also displays vertical line distortions during usplash. -- live cd can not mount root filesystem https://launchpad.net/malone/bugs/35866 From mdz at ubuntu.com Mon Apr 17 15:19:38 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Mon, 17 Apr 2006 15:19:38 -0000 Subject: [Bug 35866] Re: live cd can not mount root filesystem References: <20060321135538.16673.15124.malonedeb@gandwana.ubuntu.com> Message-ID: <20060417151939.1627.31312.malone@gangotri.ubuntu.com> There's no information here about a failure to mount the root filesystem. if you can provide a detailed report and error messages for that problem, please file a new bug. Meanwhile, assigning this one to the kernel, which is responsible for the video framebuffer used by usplash. It would be helpful if someone would attach the screenshots to this bug. ** Changed in: initramfs-tools (Ubuntu) Sourcepackagename: initramfs-tools => linux-source-2.6.15 Severity: Major => Minor ** Summary changed: - live cd can not mount root filesystem + Framebuffer video corruption ** Description changed: - the current dapper flight 5 live cd crashes while mounting the - filesystem. after a long string of error messages, I am presented with - a root shell. - vertical lines are present in the usplash logo and text, spaced at approximately every 20 pixels. i'm running on a Dell inspiron 8200. Breezy works without issue, but also displays vertical line distortions during usplash. -- Framebuffer video corruption https://launchpad.net/malone/bugs/35866 From mdz at ubuntu.com Mon Apr 17 15:22:05 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Mon, 17 Apr 2006 15:22:05 -0000 Subject: [Bug 31347] Re: 2.6.15-15.21_i686 does not boot (depmod not found) References: <20060213215338.1459.91446.malonedeb@gangotri.ubuntu.com> Message-ID: <20060417152205.16443.96304.launchpad@gandwana.ubuntu.com> ** Changed in: initramfs-tools (Ubuntu) Sourcepackagename: initramfs-tools => prelink ** Changed in: prelink (Ubuntu) Assignee: Adam Conrad => (unassigned) -- 2.6.15-15.21_i686 does not boot (depmod not found) https://launchpad.net/malone/bugs/31347 From mdz at ubuntu.com Mon Apr 17 15:32:28 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Mon, 17 Apr 2006 15:32:28 -0000 Subject: [Bug 31983] Re: Kernel security update renders system unbootable References: <20060219133514.1427.22950.malonedeb@gangotri.ubuntu.com> Message-ID: <20060417153228.1684.42933.malone@gangotri.ubuntu.com> No one else has been able to reproduce this problem, so there is something about it which is specific to your system. That is why it is unconfirmed: we don't yet know whether there is a bug or where it might lie. If you can try to confirm this with a fresh install, that would help us very much. -- Kernel security update renders system unbootable https://launchpad.net/malone/bugs/31983 From brother.bloat at gmail.com Mon Apr 17 15:37:25 2006 From: brother.bloat at gmail.com (jeremy) Date: Mon, 17 Apr 2006 15:37:25 -0000 Subject: [Bug 35866] Re: Framebuffer video corruption References: <20060321135538.16673.15124.malonedeb@gandwana.ubuntu.com> Message-ID: <20060417153725.16443.13769.malone@gandwana.ubuntu.com> Matt, given that the only bug appears to be a delay in mounting the root filesystem, I'm not sure what information you're looking to glean from a screenshot. In the Dapper Flight 5 live cd, a long string of errors were spit out, but with Flight 6 the filesystem seemed to mount ok. For an example of the screen distortion, refer to this: http://img300.imageshack.us/img300/7812/000031na.jpg as was posted previously. -- Framebuffer video corruption https://launchpad.net/malone/bugs/35866 From thomas.klein at lanterne.org Mon Apr 17 16:13:55 2006 From: thomas.klein at lanterne.org (gourdin) Date: Mon, 17 Apr 2006 16:13:55 -0000 Subject: [Bug 33230] Re: sky2 hangs on large data transfers (upstream fix available) References: <20060301081029.22115.81038.malonedeb@gandwana.ubuntu.com> Message-ID: <20060417161356.1627.2364.malone@gangotri.ubuntu.com> same bug here Linux archon 2.6.15-20-686 #1 SMP PREEMPT anyone planning on upload a 2.6.16 ? -- sky2 hangs on large data transfers (upstream fix available) https://launchpad.net/malone/bugs/33230 From devvv at devvv.de Mon Apr 17 17:04:11 2006 From: devvv at devvv.de (devvv) Date: Mon, 17 Apr 2006 17:04:11 -0000 Subject: [Bug 31983] Re: Kernel security update renders system unbootable References: <20060219133514.1427.22950.malonedeb@gangotri.ubuntu.com> Message-ID: <20060417170411.1627.108.malone@gangotri.ubuntu.com> Thank you for your answer. I now installed Dapper Drake Flight 6 and the problem did not occur. Let's hope that it was something installation specific and it doesn't occur anymore. -- Kernel security update renders system unbootable https://launchpad.net/malone/bugs/31983 From sfeehan at sbb.uvm.edu Mon Apr 17 17:04:50 2006 From: sfeehan at sbb.uvm.edu (Steve Feehan) Date: Mon, 17 Apr 2006 17:04:50 -0000 Subject: [Bug 28902] Re: scsi_proc_hostdir_add: proc_mkdir failed References: <20060118154447.28441.56956.malonedeb@gangotri.ubuntu.com> Message-ID: <20060417170450.16443.19775.malone@gandwana.ubuntu.com> Hi. I'm seeing the same error for a different SCSI adapter. In my case it's a QLogic 2200 (qla2200). The kernel is the Dapper "server" kernel: sfeehan at dogwood:~$ uname -r 2.6.15-20-server Here is the error I see in dmesg output: [42949379.580000] SCSI subsystem initialized [42949379.580000] QLogic Fibre Channel HBA Driver [42949379.590000] ACPI: PCI Interrupt 0000:03:01.0[A] -> GSI 29 (level, low) -> IRQ 169 [42949379.590000] scsi_proc_hostdir_add: proc_mkdir failed for [42949379.590000] qla2200 0000:03:01.0: Found an ISP2200, irq 169, iobase 0xf883c000 [42949379.590000] qla2200 0000:03:01.0: Configuring PCI space... [42949379.590000] qla2200 0000:03:01.0: Configure NVRAM parameters... [42949379.670000] qla2200 0000:03:01.0: Verifying loaded RISC code... [42949379.880000] qla2200 0000:03:01.0: Waiting for LIP to complete... [42949399.960000] qla2200 0000:03:01.0: Cable is unplugged... [42949399.960000] scsi0 : qla2xxx [42949399.960000] qla2200 0000:03:01.0: [42949399.960000] QLogic Fibre Channel HBA Driver: 8.01.03-k [42949399.960000] QLogic QLA22xx - [42949399.960000] ISP2200: PCI (66 MHz) @0000:03:01.0 hdma-, host#=0, fw=2.02.08 TP Please let me know if there is any additional info I can provide. Thanks. Steve -- scsi_proc_hostdir_add: proc_mkdir failed https://launchpad.net/malone/bugs/28902 From jantonio.martin at gmail.com Mon Apr 17 18:47:42 2006 From: jantonio.martin at gmail.com (Jose Antonio Martin Prieto) Date: Mon, 17 Apr 2006 18:47:42 -0000 Subject: [Bug 32123] Re: initramfs not generated correctly on upgrade to Dapper References: <20060220130413.1427.33476.malonedeb@gangotri.ubuntu.com> Message-ID: <20060417184742.16492.80210.launchpad@gandwana.ubuntu.com> ** Attachment added: "Generated initrd image" http://librarian.launchpad.net/2128879/initrd.img-2.6.15-20-powerpc -- initramfs not generated correctly on upgrade to Dapper https://launchpad.net/malone/bugs/32123 From albrecht.gebhardt at uni-klu.ac.at Mon Apr 17 19:23:14 2006 From: albrecht.gebhardt at uni-klu.ac.at (Albrecht Gebhardt) Date: Mon, 17 Apr 2006 19:23:14 -0000 Subject: [Bug 38238] Re: prism54 no longer works References: <20060405180221.24486.72499.malonedeb@gangotri.ubuntu.com> Message-ID: <20060417192314.1627.59112.malone@gangotri.ubuntu.com> *** This bug is a duplicate of bug 38278 *** same problem for me (old NetGear WG511 pre ver3). lsmod shows that both prism54 (old fullmac driver, KERNELSRC/drivers/net/wireless/prism54) AND islsm* (new softmac driver, KERNELSRC/drivers/net/wireless/prism54_softmac) are loaded. unfortunately islsm_pci tries wins and tries first to upload its firmware. lsmod Module Size Used by prism54 59688 0 islsm_pci 24488 0 islsm_device 12584 1 islsm_pci islsm 40172 2 islsm_pci,islsm_device ieee80211softmac 30272 1 islsm crc_ccitt 2240 1 islsm the first "ifconfig ethX up" tries to load the (rong) firmware: [4322194.635000] islusb: Request firmware for 'isl3886' failed: -2 [4322194.636000] eth2: could not upload firmware ('isl3886') [4322194.636000] eth2: islpci_reset: failure [4322194.686000] islusb: unable to boot device But when I first (before "ifconfig ethX up") rmmod all islsm* and the prism54 module and then re-insert only the prism54 module it starts working again: rmmod islsm_pci rmmod islsm_device rmmod islsm rmmod prism54 modprobe prism54 ... works: dmesg ... [4321395.167000] Unloaded islsm_pci driver [4321418.036000] Unloaded prism54 driver [4321426.859000] Loaded prism54 driver, version 1.2 [4321426.860000] ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 [4321426.861000] eth2: uploading firmware... [4321427.012000] eth2: firmware version: 1.0.4.3 [4321427.012000] eth2: firmware upload complete So if someone knows how to "blacklist" the islsm_pci driver for the old prism54 cards, this could help ... Best regards Albrecht -- prism54 no longer works https://launchpad.net/malone/bugs/38238 From f-bert at gmx.net Mon Apr 17 19:53:58 2006 From: f-bert at gmx.net (f-bert) Date: Mon, 17 Apr 2006 19:53:58 -0000 Subject: [Bug 39912] [dapper] s3 freeze s4 works References: <20060417194349.16443.60065.malonedeb@gandwana.ubuntu.com> Message-ID: <20060417195358.1684.42507.launchpad@canonical@gangotri.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: 1. choose System:LogOut:Suspend 2. wake up computer 3. switch into graphic mode (ctrl-alt-F7) 4. now i have a little bit time then my pc freeze it seems that i cannot access my disks... Suspend to disk works fine. http://www.f-bert.net/blog/fileadmin/dmsg_acpi_support.txt http://www.f-bert.net/blog/fileadmin/dmsg_acpi_support_reset_drive.txt Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: 1. choose System:LogOut:Suspend 2. wake up computer 3. switch into graphic mode (ctrl-alt-F7) 4. now i have a little bit time then my pc freeze it seems that i cannot access my disks... Suspend to disk works fine. http://www.f-bert.net/blog/fileadmin/dmsg_acpi_support.txt http://www.f-bert.net/blog/fileadmin/dmsg_acpi_support_reset_drive.txt -- [dapper] s3 freeze s4 works https://launchpad.net/malone/bugs/39912 From mjg59 at codon.org.uk Mon Apr 17 19:53:58 2006 From: mjg59 at codon.org.uk (Matthew Garrett) Date: Mon, 17 Apr 2006 19:53:58 -0000 Subject: [Bug 39912] Re: [dapper] s3 freeze s4 works References: <20060417194349.16443.60065.malonedeb@gandwana.ubuntu.com> Message-ID: <20060417195358.1684.40798.launchpad@gangotri.ubuntu.com> ** Changed in: acpi-support (Ubuntu) Sourcepackagename: acpi-support => linux-source-2.6.15 Binarypackagename: acpi-support => None -- [dapper] s3 freeze s4 works https://launchpad.net/malone/bugs/39912 From joe at gwallgofi.com Mon Apr 17 19:56:29 2006 From: joe at gwallgofi.com (JGJones) Date: Mon, 17 Apr 2006 19:56:29 -0000 Subject: [Bug 38238] Re: prism54 no longer works References: <20060405180221.24486.72499.malonedeb@gangotri.ubuntu.com> Message-ID: <20060417195629.16443.64265.malone@gandwana.ubuntu.com> *** This bug is a duplicate of bug 38278 *** Confirmed on latest updated Ubuntu as of Monday 17th April 20:45 GMT (+1 BST) jgjones at ubuntu:~$ uname -a Linux ubuntu 2.6.15-20-686 #1 SMP PREEMPT Tue Apr 4 18:37:00 UTC 2006 i686 GNU/Linux jgjones at ubuntu:~$ lspci |grep Prism 0000:03:00.0 Network controller: Intersil Corporation Intersil ISL3890 [Prism GT/Prism Duette] (rev 01) And from dmesg the relevant parts: [4294697.923000] pccard: CardBus card inserted into slot 0 [4294697.980000] cs: IO port probe 0x100-0x3af: clean. [4294697.981000] cs: IO port probe 0x3e0-0x4ff: clean. [4294697.982000] cs: IO port probe 0x820-0x8ff: clean. [4294697.982000] cs: IO port probe 0xc00-0xcf7: clean. [4294697.982000] cs: IO port probe 0xa00-0xaff: clean. [4294698.048000] Loaded islsm_pci driver, version 0 [4294698.049000] PCI: Enabling device 0000:03:00.0 (0000 -> 0002) [4294698.049000] ACPI: PCI Interrupt 0000:03:00.0[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11 [4294698.127000] Loaded prism54 driver, version 1.2 [4294709.528000] islusb: Request firmware for 'isl3886' failed: -2 [4294709.528000] eth1: could not upload firmware ('isl3886') [4294709.529000] eth1: islpci_reset: failure [4294709.580000] islusb: unable to boot device [4294712.467000] islusb: Request firmware for 'isl3886' failed: -2 [4294712.467000] eth1: could not upload firmware ('isl3886') [4294712.468000] eth1: islpci_reset: failure [4294712.518000] islusb: unable to boot device The last section repeats over and over quite a few times. I am using a Dell Inspiron 8500 laptop (the model with a 1280x800 15" screen and ATI 9000 chipset) The card I am using is a Netgear WG511 (Made in Taiwan) - V1 - which should work out of the box basically as far as I can tell. I actually have two copies of the Netgear WG511 (Made in Taiwan) cards, both v1, and both works on Windows, and on other Linux distro using Prism54 (as well as on Breezy). I have not used previous kernal to test as the .20 kernal version is the first one I've used on the laptop - installed Ubuntu using Flight 6 CD and then apt-get dist-upgrade all the latest updates and then put in card. I am happy to put in anything else the dev requires to fix the bug such as the full dmesg log etc. -- prism54 no longer works https://launchpad.net/malone/bugs/38238 From albrecht.gebhardt at uni-klu.ac.at Mon Apr 17 19:58:50 2006 From: albrecht.gebhardt at uni-klu.ac.at (Albrecht Gebhardt) Date: Mon, 17 Apr 2006 19:58:50 -0000 Subject: [Bug 38238] Re: prism54 no longer works References: <20060405180221.24486.72499.malonedeb@gangotri.ubuntu.com> Message-ID: <20060417195850.1627.21368.malone@gangotri.ubuntu.com> *** This bug is a duplicate of bug 38278 *** ... the softmac driver also supports the old fullmac cards, so another solution is to get the softmac firmware (version2.x) e.g from http://jbnote.free.fr/prism54usb/data/firmwares/pci/2.7.0.0/2.7.0.0.arm put it into /lib/firmware/2.6.15-20-686 (or whatever the corrct path will be) as isl3886 and it (partly) works without removing the islsm* modules: The interfaces now comes up, with the correct HWA. DHCP fails for me, obviously because I cannot get my WEP key into the card in Softmac mode: iwconfig eth2 key XXXXXXXXXXXXXXXX Error for wireless request "Set Encode" (8B2A) : SET failed on device eth2 ; Unknown error 524. So I'll continue to try to disable the islsm driver for the old card, I hope removing the PCI ID of the old card from the softmac driver will do the job, my kernel compiles just now: --- ./drivers/net/wireless/prism54_softmac/islpci_hotplug.c.ag 2006-04-17 21:27:25.000000000 +0200 +++ ./drivers/net/wireless/prism54_softmac/islpci_hotplug.c 2006-04-17 21:29:10.000000000 +0200 @@ -45,11 +45,11 @@ static const struct pci_device_id islpci_id_tbl[] = { /* Intersil PRISM Duette/Prism GT Wireless LAN adapter */ - { + /* DISABLED, use old driver! { 0x1260, 0x3890, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, - + */ /* 3COM 3CRWE154G72 Wireless LAN adapter */ { 0x10b7, 0x6001, Albrecht -- prism54 no longer works https://launchpad.net/malone/bugs/38238 From f-bert at gmx.net Mon Apr 17 20:45:13 2006 From: f-bert at gmx.net (f-bert) Date: Mon, 17 Apr 2006 20:45:13 -0000 Subject: [Bug 39912] Re: [dapper] s3 freeze s4 works References: <20060417194349.16443.60065.malonedeb@gandwana.ubuntu.com> Message-ID: <20060417204513.1684.80929.launchpad@gangotri.ubuntu.com> ** Description changed: 1. choose System:LogOut:Suspend 2. wake up computer 3. switch into graphic mode (ctrl-alt-F7) 4. now i have a little bit time then my pc freeze it seems that i cannot access my disks... Suspend to disk works fine. http://www.f-bert.net/blog/fileadmin/dmsg_acpi_support.txt http://www.f-bert.net/blog/fileadmin/dmsg_acpi_support_reset_drive.txt + + some hardware details: + -GeForce2 MX/MX 400 + -asus a7n8x-xe + -werstern digital WD2500JB -- [dapper] s3 freeze s4 works https://launchpad.net/malone/bugs/39912 From spotter at cs.columbia.edu Tue Apr 18 01:03:56 2006 From: spotter at cs.columbia.edu (Shaya Potter) Date: Tue, 18 Apr 2006 01:03:56 -0000 Subject: [Bug 39940] repeatable panic when switching to console at X startup References: <20060418010356.16492.97883.malonedeb@gandwana.ubuntu.com> Message-ID: <20060418010356.16492.97883.malonedeb@gandwana.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: On my T42p running latest dapper, if I log into X, via gdm, and right away switch to vt1, the machine panics and hangs hard. unsure how to get the information you might need without a serial console. -- repeatable panic when switching to console at X startup https://launchpad.net/malone/bugs/39940 From tom at nsp.co.nz Tue Apr 18 04:09:18 2006 From: tom at nsp.co.nz (cartel) Date: Tue, 18 Apr 2006 04:09:18 -0000 Subject: [Bug 39948] Please support Xen 3.0.2 by syncing to debian version 10.043+ References: <20060418040918.1627.2094.malonedeb@gangotri.ubuntu.com> Message-ID: <20060418040918.1627.2094.malonedeb@gangotri.ubuntu.com> Public bug reported: Affects: kernel-package (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: Upstream 10.042 received a bugfix to support Xen as a subarch of i386, required to properly handle building kernels for xen 3.0.2 and above. Please sync to support this. -- Please support Xen 3.0.2 by syncing to debian version 10.043+ https://launchpad.net/malone/bugs/39948 From albrecht.gebhardt at uni-klu.ac.at Tue Apr 18 06:07:37 2006 From: albrecht.gebhardt at uni-klu.ac.at (Albrecht Gebhardt) Date: Tue, 18 Apr 2006 06:07:37 -0000 Subject: [Bug 38238] Re: prism54 no longer works References: <20060405180221.24486.72499.malonedeb@gangotri.ubuntu.com> Message-ID: <20060418060737.16492.54740.malone@gandwana.ubuntu.com> *** This bug is a duplicate of bug 38278 *** ... my patch from the post above seems to work. After removing the PCI device ID for the old fullmax card (3890) from the new softmac driver the situation after inserting the card is: only prism54 isloaded Module Size Used by prism54 59688 0 ieee80211 37032 0 ieee80211_crypt 6528 1 ieee80211 and it uploads the correct old (isl3890) firmware (version 1.x): [4294974.239000] pccard: CardBus card inserted into slot 1 [4294974.539000] Loaded prism54 driver, version 1.2 [4294974.541000] PCI: Enabling device 0000:06:00.0 (0000 -> 0002) [4294974.541000] ACPI: PCI Interrupt 0000:06:00.0[A] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10 [4294974.543000] eth1: uploading firmware... [4294974.675000] eth1: firmware version: 1.0.4.3 [4294974.675000] eth1: firmware upload complete [4294975.352000] eth1: resetting device... [4294975.353000] eth1: uploading firmware... [4294975.448000] eth1: firmware version: 1.0.4.3 [4294975.449000] eth1: firmware upload complete [4294975.688000] eth1: interface reset complete [4294985.796000] eth1: no IPv6 routers present I think this should not break anything for users of non-PCI-ID-3980 devices, their IDs are still available in th islsm* module. Futhermore it could be necessary to remove those IDs also from prism54 (it claims to be "hotpluggable" for 3886 devices which are only supported by islsm*, don't know what to do with the 3877 device also listed there) Of course the whole islsm* driver is useless without the 2.x firmware present in the according linux-restriced-modules-2.6.15-XY package. So please include http://jbnote.free.fr/prism54usb/data/firmwares/pci/2.7.0.0/2.7.0.0.arm as isl3886, http://jbnote.free.fr/prism54usb/data/firmwares/3887/2.5.8.0/2.5.8.0.arm as isl3887usb_bare and http://jbnote.free.fr/prism54usb/data/firmwares/net2280/2.4.3.7/2.4.3.7.arm as isl3890usb (see the Firmware section at http://jbnote.free.fr/prism54usb/) Albrecht -- prism54 no longer works https://launchpad.net/malone/bugs/38238 From albrecht.gebhardt at uni-klu.ac.at Tue Apr 18 06:19:18 2006 From: albrecht.gebhardt at uni-klu.ac.at (Albrecht Gebhardt) Date: Tue, 18 Apr 2006 06:19:18 -0000 Subject: [Bug 38278] Re: wifi card don't work. isl3886 is required but not installed References: <20060405203926.24486.7083.malonedeb@gangotri.ubuntu.com> Message-ID: <20060418061918.16443.40749.malone@gandwana.ubuntu.com> I attached a patch which should solve the problem to the bug duplicate 38238 (https://launchpad.net/malone/bugs/38238) (sorry for ignoring the duplicate bug indicator on top of it). The patch simply removes the PCI device ID of the old card (0x3890) from the module device table, so hotplug does no longer consider islsm_pci to be responsible for the old card. It could also be necessary to remove the device IDs from the newer cards vicevers from the old driver (especially the 3886 device), not included in my patch -- but a similar change to the islpci_hotplug.c file of the drivers/net/wireless/prism54 subdir. And if the prism54_softmac driver should be usefull please include the firmware images mentioned at http://jbnote.free.fr/prism54usb/ in the linux-restricted-modules package. Albrecht -- wifi card don't work. isl3886 is required but not installed https://launchpad.net/malone/bugs/38278 From fabbione at ubuntu.com Tue Apr 18 06:43:22 2006 From: fabbione at ubuntu.com (Fabio Massimo Di Nitto) Date: Tue, 18 Apr 2006 06:43:22 -0000 Subject: [Bug 34065] Re: hard disks are powered down (even in -server kernels) References: <20060308112603.14318.51120.malonedeb@gangotri.ubuntu.com> Message-ID: <20060418064322.16443.45224.malone@gandwana.ubuntu.com> Increasing severity. Ben we really need this one fixed asap. Fabio ** Changed in: linux-source-2.6.15 (Ubuntu) Severity: Normal => Major -- hard disks are powered down (even in -server kernels) https://launchpad.net/malone/bugs/34065 From sitsofe at yahoo.com Tue Apr 18 07:21:20 2006 From: sitsofe at yahoo.com (Sitsofe Wheeler) Date: Tue, 18 Apr 2006 07:21:20 -0000 Subject: [Bug 39958] Re: Trying to access unmounted SMBFS share in Rhythmbox causes entire system crash References: <20060418054930.1684.32955.malonedeb@gangotri.ubuntu.com> Message-ID: <20060418072120.16443.8642.malone@gandwana.ubuntu.com> If caps lock really stops working then this is a kernel bug not a rhythmbox bug. It should be impossible for userspace to cause complete kernel lockups... Could you also attach the output of lspci ? ** Also affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed -- Trying to access unmounted SMBFS share in Rhythmbox causes entire system crash https://launchpad.net/malone/bugs/39958 From sitsofe at yahoo.com Tue Apr 18 07:26:06 2006 From: sitsofe at yahoo.com (Sitsofe Wheeler) Date: Tue, 18 Apr 2006 07:26:06 -0000 Subject: [Bug 39940] Re: repeatable panic when switching to console at X startup References: <20060418010356.16492.97883.malonedeb@gandwana.ubuntu.com> Message-ID: <20060418072606.1684.84224.malone@gangotri.ubuntu.com> Can you indicate which graphics card and drivers you are using? -- repeatable panic when switching to console at X startup https://launchpad.net/malone/bugs/39940 From spotter at cs.columbia.edu Tue Apr 18 07:57:12 2006 From: spotter at cs.columbia.edu (Shaya Potter) Date: Tue, 18 Apr 2006 07:57:12 -0000 Subject: [Bug 39940] Re: repeatable panic when switching to console at X startup References: <20060418010356.16492.97883.malonedeb@gandwana.ubuntu.com> Message-ID: <20060418075712.1627.71213.malone@gangotri.ubuntu.com> It's flgrx, but I don't believe its that, as I saw i810_audio in the limited backtrace that I saw. I can try to recreate it and write the backtrace down by hand when I get a chance. -- repeatable panic when switching to console at X startup https://launchpad.net/malone/bugs/39940 From scott at ubuntu.com Tue Apr 18 08:35:44 2006 From: scott at ubuntu.com (Scott James Remnant) Date: Tue, 18 Apr 2006 08:35:44 -0000 Subject: [Bug 21449] Re: USB mass-storage install fails References: <20060113141253.21012.76580.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060418083544.16443.20139.malone@gandwana.ubuntu.com> This should work fine in dapper, no? -- USB mass-storage install fails https://launchpad.net/malone/bugs/21449 From evrgreen at netsync.net Tue Apr 18 08:54:13 2006 From: evrgreen at netsync.net (SilverBear) Date: Tue, 18 Apr 2006 08:54:13 -0000 Subject: [Bug 38231] NEC CD-ROM drive not recognized References: <20060405174352.24486.41172.malonedeb@gangotri.ubuntu.com> Message-ID: <20060418085413.16443.96598.launchpad@canonical@gandwana.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: My CD-Rom drive, a CD/DVD RW dual Layer drive [ _NEC DVD_RW ND-3550A ] was not recognized by Breezy, nor by Dapper 6.05, nor by Dapper 6.06. Here is the fstab: ***************** # /etc/fstab: static file system information. # # proc /proc proc defaults 0 0 /dev/hda9 / ext3 defaults,errors=remount-ro 0 1 /dev/hda1 /media/hda1 ntfs defaults 0 0 /dev/hda2 /media/hda2 ntfs defaults 0 0 /dev/hda3 /media/hda3 ext3 defaults 0 2 /dev/hda6 /media/hda6 ext3 defaults 0 2 /dev/hda7 /media/hda7 ext3 defaults 0 2 /dev/hda8 /media/hda8 ext3 defaults 0 2 /dev/sda1 /media/sda1 vfat defaults 0 0 /dev/sda2 /media/sda2 vfat defaults 0 0 /dev/sda3 /media/sda3 vfat defaults 0 0 /dev/hda5 none swap sw 0 0 /dev/hdc /media/cdrom0 udf,iso9660 user,noauto 0 0 /dev/fd0 /media/floppy0 auto rw,user,noauto 0 0 ************** however, /dev/hdc does not appear in the device manager as master of IDE1 [the second IDE channel] as it should, so it is not mounted. I regret that my inexperience with Linux does not permit me to investigate much beyond this point. Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: My CD-Rom drive, a CD/DVD RW dual Layer drive [ _NEC DVD_RW ND-3550A ] was not recognized by Breezy, nor by Dapper 6.05, nor by Dapper 6.06. Here is the fstab: ***************** # /etc/fstab: static file system information. # # proc /proc proc defaults 0 0 /dev/hda9 / ext3 defaults,errors=remount-ro 0 1 /dev/hda1 /media/hda1 ntfs defaults 0 0 /dev/hda2 /media/hda2 ntfs defaults 0 0 /dev/hda3 /media/hda3 ext3 defaults 0 2 /dev/hda6 /media/hda6 ext3 defaults 0 2 /dev/hda7 /media/hda7 ext3 defaults 0 2 /dev/hda8 /media/hda8 ext3 defaults 0 2 /dev/sda1 /media/sda1 vfat defaults 0 0 /dev/sda2 /media/sda2 vfat defaults 0 0 /dev/sda3 /media/sda3 vfat defaults 0 0 /dev/hda5 none swap sw 0 0 /dev/hdc /media/cdrom0 udf,iso9660 user,noauto 0 0 /dev/fd0 /media/floppy0 auto rw,user,noauto 0 0 ************** however, /dev/hdc does not appear in the device manager as master of IDE1 [the second IDE channel] as it should, so it is not mounted. I regret that my inexperience with Linux does not permit me to investigate much beyond this point. -- NEC CD-ROM drive not recognized https://launchpad.net/malone/bugs/38231 From scott at ubuntu.com Tue Apr 18 08:54:13 2006 From: scott at ubuntu.com (Scott James Remnant) Date: Tue, 18 Apr 2006 08:54:13 -0000 Subject: [Bug 38231] Re: NEC CD-ROM drive not recognized References: <20060405174352.24486.41172.malonedeb@gangotri.ubuntu.com> Message-ID: <20060418085413.16443.30206.malone@gandwana.ubuntu.com> No evidence of your drive in your udev.log Please confirm to us how it is connected to your computer. Is it IDE or SCSI? Which IDE port (Primary/Secondary, Master/Slave) or which SCSI LUN? Is it neither and connected via USB, a parallel port or some other method? If possible, take a screenshot of your computer's BIOS POST screen showing the connected device. Also please attach your /var/log/dmesg file ** Changed in: Ubuntu Sourcepackagename: None => linux-source-2.6.15 -- NEC CD-ROM drive not recognized https://launchpad.net/malone/bugs/38231 From danilo at gnome.org Tue Apr 18 09:09:40 2006 From: danilo at gnome.org (=?utf-8?b?0JTQsNC90LjQu9C+INCo0LXQs9Cw0L0=?=) Date: Tue, 18 Apr 2006 09:09:40 -0000 Subject: [Bug 37145] Re: UniChrome Pro IGP not shown in lspci; X doesn't work References: <20060329110215.6279.44293.malonedeb@gandwana.ubuntu.com> Message-ID: <20060418090940.16492.88550.malone@gandwana.ubuntu.com> pci=noacpi doesn't help. Reverting BIOS settings doesn't either. I also posted this to VIA Arena forums: http://forums.viaarena.com/messageview.aspx?catid=28&threadid=71408&STARTPAGE=1 A guy there suggested to look for BIOS option "Enable Interrupt 19", but my BIOS doesn't have that one. -- UniChrome Pro IGP not shown in lspci; X doesn't work https://launchpad.net/malone/bugs/37145 From tom.ubuntu at thoughtcrime.org.nz Tue Apr 18 10:47:05 2006 From: tom.ubuntu at thoughtcrime.org.nz (cartel) Date: Tue, 18 Apr 2006 10:47:05 -0000 Subject: [Bug 39948] Debian changelog References: <20060418040918.1627.2094.malonedeb@gangotri.ubuntu.com> Message-ID: <20060418104705.1627.60763.malone@gangotri.ubuntu.com> kernel-package (10.044) unstable; urgency=low * Fix typo in powerpc specific rules. -- Manoj Srivastava Fri, 14 Apr 2006 10:24:14 -0500 kernel-package (10.043) unstable; urgency=low * Update mkvmlinuz support handling -- Manoj Srivastava Thu, 13 Apr 2006 10:52:12 -0500 kernel-package (10.042) unstable; urgency=low * Arrgh. Typo fix in domU package name, inux -> linux -- Manoj Srivastava Wed, 12 Apr 2006 15:21:44 -0500 kernel-package (10.041) unstable; urgency=low * Bug fix: "Support for Xen as a subarch", thanks to Tore Anderson. No special handling need be required -- with a properly created .config file, make-kpkg should automatically detect Xen 3.0.1 or 3.0.2, and appropriately set the arch and subarch variable. (Closes: #346387). * kernel/pkg/image/postinst (fix_source_link): Clarify that it is the link target that we cannot see the contents of. * kernel/ruleset/arches/i386.mk: Add in separate stanzas for a subarch Xen, versus the normal i386 build. We change boot loader definitions, dependencies, targets, and image destinations. * kernel/ruleset/architecture.mk: No longer assume that the presence of CONFIG_XEN implies the ARCH is also xen; since now the ARCH is i386, but the subarch is xen. * kernel/ruleset/common/archvars.mk: Now we include .config earlier, to allow us to detect xen and uml, and automatically set the arch and subarch variables based on the configuration file. This help people like me who routinely forget to give --arch um to make-kpkg, and wonder why my uml virtual machine fails. * kernel/ruleset/kernel_version.mk (debian_LOCALVERSION): Late evaluation to allow all components to settle. * kernel/ruleset/misc/pkg_names.mk (i_package): Modify the names of the Xen image packages based on type of xen image being built. * kernel/ruleset/targets/image.mk (install/$(i_package)): Make sure that the System.map and config files installed in /boot for Xen images have a string in the name ti disambiguate them from "normal" image packages files. -- Manoj Srivastava Wed, 12 Apr 2006 13:58:11 -0500 kernel-package (10.040) unstable; urgency=low * Document the version of kernel-package used liberally in build logs now. This should mitigate any future doubts about which version of kernel-package is in use. * Bug fix: "kernel-package missing .kernelrelease for 2.6.16 headers", thanks to Paul (Closes: #359818). * Bug fix: "kernel-package: Doesn't handle CONFIG_LOCALVERSION", thanks to David Liontooth. Thanks to Jan Niehusmann, who noticed my blind spot about how dot-config was set to 0 (Closes: #359187, #335541). -- Manoj Srivastava Wed, 29 Mar 2006 10:10:48 -0600 kernel-package (10.039) unstable; urgency=high * In 2.6.16, the top level Makefile added a unified local version variable called localver-full -- which is what we need to pay attention to, not $(LOCALVERSION). This caused a slew of build failures, wihch have been variously reported -- for example, "kernel-package: Doesn't handle CONFIG_LOCALVERSION", thanks to David Liontooth (Closes: #359187). * The same changes also allow for us to support _all_ local version variations, including: "Support for LOCALVERSION_AUTO possible?", thanks to Jan Niehusmann (Closes: #335541). * Goswin von Brederlow added support for building other archs of a multiarch set like i386/amd64. Usage is with --arch --cross-compile -. + ruleset/misc/defaults.mk: Set CROSS_COMPILE="" if it is '-'. + ruleset/common/archvars.mk: Don't override DEB_HOST_* if CROSS_COMPILE='-'. (Closes: #359019). * Urgency high since this is required to correcltly build 2.6.16 kernels with any local version settings. -- Manoj Srivastava Mon, 27 Mar 2006 12:03:22 -0600 kernel-package (10.038) unstable; urgency=medium * The debconf templates broke. -- Manoj Srivastava Thu, 23 Mar 2006 23:09:44 -0600 kernel-package (10.037) unstable; urgency=medium * Bug fix: "kernel-package: modules_image target broken", thanks to Henrique de Moraes Holschuh. Patch thanks to Kevin Locke. The same problem potentially existed elsewhere, so I applied the same solution all over. (Closes: #355147). * Bug fix: "kernel-package: Please document --rootcmd sudo failure with env_reset", thanks to Kevin Locke. Done. (Closes: #357499). * Bug fix: "linux-image: error message missing words/variables/parameters", thanks to Justin Pryzby (Closes: #344374). * Bug fix: "kernel-package: Please allow for translatable debconf templates in created packages", thanks to Christian Perrier (Closes: #355994). * Vy popular demand, we toned down the checks for overwriting previously installed kernels. Instead of checking for /lib/modules/$version, we only check is /lib/modules/$version/kernel exists. This means that third party modules shall not trigger any interactions with the user; it is up to the users to handle incompatibilites between previously installed third party modules and the new kernel. No check on official kernel images -- any incompatibilities should result in an ABI number change. -- Manoj Srivastava Wed, 22 Mar 2006 14:24:16 -0600 kernel-package (10.036) unstable; urgency=low * Apparently we were not copying over the rules file into the kernel-headers package. fixed that. * Bug fix: "kernel-package: config placed in /usr/bin when building UML kernels", thanks to Paul Dwerryhouse (Closes: #353490). * Bug fix: "Please put localversion file into kernel-headers", thanks to Nikita V. Youshchenko (Closes: #354452). * Tightened the version check when building modules. * Bug fix: "cp: cannot stat `/etc/scsi_id.config'", thanks to dann frazier. Initramfs-tools now have a wrapper. (Closes: #352705). * Bug fix: "Incorrect Destination, Unchangable Destination", thanks to Elliott Mitchell.Fixed destination to use DEB_DEST. (Closes: #353817). -- Manoj Srivastava Mon, 27 Feb 2006 13:18:56 -0600 kernel-package (10.035) unstable; urgency=low * Bug fix: "k-p fails to build documentation packages", thanks to Kapil Hari Paranjape. Well, kernel-manual is not supposed to be an independent target, it is supposed to depend on and simultaneously build the kernel-doc package as well. Indeed, if the kernel-doc package is not also built, we will have a broken manual package. So, change the prereqs. (I had only tested make-kpkg buildpackage, so the doc package was always available). (Closes: #352169). * Bug fix: "kernel-package: latest unstable version breaks 2.4.27 image builds", thanks to Horms. Reversed the order of the version test. The old way was buggy. (Closes: #352152). -- Manoj Srivastava Sun, 12 Feb 2006 14:06:21 -0600 kernel-package (10.034) unstable; urgency=low * Bug fix: "kernel-package: check for -j in MAKEFLAGS is not quite correct", thanks to Nathaniel Smith. Added mush more prominent warnings in the documentation. The check itself is merely a convenience, we should warn users about the pitfalls of setting -j in MAKEFLAGS directly. (Closes: #350665). * Fixed a problem build hppa kernel images. -- Manoj Srivastava Tue, 7 Feb 2006 09:48:52 -0600 kernel-package (10.033) unstable; urgency=low * Bug fix: "upstream treats mipsel and mips as one arch", thanks to Martin Michlmayr (Closes: #349527). * Bug fix: "kernel-package: Typo in the Spanish make-kpkg man page", thanks to Nicolas François (Closes: #349750). * Bug fix: "Please add support for armeb", thanks to Martin Michlmayr (Closes: #350332). -- Manoj Srivastava Sat, 28 Jan 2006 22:38:15 -0600 kernel-package (10.032) unstable; urgency=low * Bug fix: "linux-source-2.6.15: build fails: make-kpkg error on install -p -m 644 debian/buildinfo ...", thanks to darren. Hmm. Apparently, the streamlining done in the last version was a bit too stream lined. Added a dependency t the image target so we do build buildinfo. (Closes: #347487). -- Manoj Srivastava Thu, 12 Jan 2006 09:21:20 -0600 kernel-package (10.031) unstable; urgency=low * Optimize building kernel headers on recent kernels. * kernel/ruleset/local.mk (kernel-headers kernel_headers) Make kernel-headers depend on debian/stamp-prepare, instead of stamp-build-arch, since this means for 2.6.X kernels the full build may not be needed, with the advent of the prepare target. * kernel/ruleset/targets/target.mk (debian/stamp-prepare): Added this target: on new kernels, it merely calls prepare. I wish I could come up with a non-kludgey way of testing for the presence; I guess calling make -np |grep would work, but it is simple enough to just test the version numbers. When it breaks, we'll see. On older kernels it still calls the stamp-build-arch target. * Unfortunately, this still does not fix #345939, since we have $(patsubst %,BUILD/%,$(DEB_ARCH_PACKAGES)) :: BUILD/% : testdir BUILD-arch Which means that we build the kernels for all arch related packages -- it is hard to follow all the dictums of policy and cherry pick some of arch related packages _without_ doing the build. * Now, we moved building the kernel out of the build-arch target, and into the kernel image target instead. Does not help a lot overall, but may prevent duplicate invocations of build. * All in all, made a bunch of changes to optimize for speedier rebuilds. * Add a - in the check target when checking config as well. * Bug fix: "kernel-package: FTBFS: Missing Build-Depends on 'debconf'", thanks to Andreas Jochens (Closes: #347345). -- Manoj Srivastava Tue, 10 Jan 2006 13:10:41 -0600 kernel-package (10.030) unstable; urgency=low * Make the kernel image psotinst more resilient towards errors in initramfs generators. The old behavior was that the postinst took the list of generators (either determined based on the kernel version being installed, or the user's preferences), asked each one of the listof candidate generators wehther they supported the running and to be installed versions of the kernel, and then tried the first of the list of those that answered yes. The new behaviour is not to just stop at th first viable candidate, but to continue down the list until we get a generator that succeeds. * reverse the order of mkinitramfs and mkinitrd.yaird in the dependency list of the kernel image packages, since then initramfs-tools shall come earlier in the dependency listing, and apparently initramfs-tools currently has fewer problems upgrading from older kernel versions that do not support /sys (like, say, Sarge kernels). The users can still provide their preferences in kernel-pkg.conf while building, or kernel-img.conf while installing; all we are doing is changing the default order of dependencies. * Bug fix: "kernel-package: make-kpkg ignores the --revision argument", thanks to Greg NorrisRemoved the calculation of$(debian) from version_vars.mk, since this is included before the config file is included, so the latter always over rides the setting of the debian revision on the command line. Instead, add it to config.mk, since it is included _after_ the config file is. Also, make-kpkg was not really passing --revision down to minimal.mk -- oops. (Closes: #345799). -- Manoj Srivastava Tue, 3 Jan 2006 19:41:34 -0600 2005 kernel-package (10.029) unstable; urgency=low * Change INSTALL_MKVMLINUZ_PATH specification to be relative to the top of the iamge package -- Manoj Srivastava Sat, 31 Dec 2005 11:32:02 -0600 kernel-package (10.028) unstable; urgency=low * Bug fix: "kernel-package GUESS_SUBARCH should be dependent on kernel version too.", thanks to Sven Luther. tweakewd the supplied powerpc.mk to accept all 4 variants of the arch name. (Closes: #345198). -- Manoj Srivastava Thu, 29 Dec 2005 15:00:56 -0600 kernel-package (10.027) unstable; urgency=low * Bug fix: "kernel-package: Typo in make-kpkg: s/maybe/may be/", thanks to Karsten M. Self (Closes: #344956). * Bug fix: "kernel-package: More typos", thanks to Frans Pop. I usually don't go back and change old changelogs, seems too close to rewriting history. But, I suppose typo fixes are OK (Closes: #344828). * Bug fix: "kernel-package: Hangs on purge of new Sparc 2.4 kernels", thanks to Frans Pop. Well. It does not hang on i386, and I think the change made to the postrm will fix it even for sparc, so here's keeping ones fingers crossed (Closes: #344918). * Bug fix: "kernel-package: [powerpc] k-p does funny things with dpkg-architecture, breaks kernel builds", thanks to Sven Luther (Closes: #344833). -- Manoj Srivastava Wed, 28 Dec 2005 13:05:40 -0600 kernel-package (10.026) unstable; urgency=low * Bug fix: "kernel-package: Typos in NEWS.Debian", thanks to Frans Pop (Closes: #344556). * Bug fix: "ARCH=powerpc instead of ARCH=ppc on powerpc kernels << 2.6.15", thanks to Don Armstrong. Fix from Sven Luther. (Closes: #342767). * Bug fix: "kernel-package: [powerpc] powerpc is switching from ARCH=ppc/ppc64 to ARCH=powerpc ...", thanks to Sven Luther (Closes: #340629). -- Manoj Srivastava Sun, 25 Dec 2005 12:19:53 -0600 kernel-package (10.025) unstable; urgency=low * Bug fix: "kernel-package: latest unstable version breaks linux-2.6 build on amd64", thanks to Frederik Schueler. Now we let the architecture still be whatever DEB_HOST_ARCH_CPU says it should be. Just set KERNEL_ARCH correctly on amd64/x86_64 machines early, so that make-kpkg clean does not flake out when there is no ./debian dir. Accept either x86_64 or amd64 as the architecture, just in case, when selecting the correct Makefile snippet. So it is perfectly fine to still say --arch=amd64, like linux-2.6 does (Closes: #344740). * Bug fix: "[powerpc] k-p 10.00x breaks debconf based /etc/kernel/*.d scripts like mkvmlinuz", thanks to Sven Luther. Well. In the recent 10.X series, kernel package has started producing image packages whose maintainer scripts use debconf for user interaction. Unfortunately, this meant that any hook scripts called in the maintainer scripts for the image package (update-grub comes to mind), if they wrote anything at all to the STDOUT, would cause debconf to throw hissy fits, since it was expecting commands on STDOUT, not random chatter from the hook scripts. One solution was to call db_stop before calling the hook scripts, and redirecting stdout to stderr in hte invocation of the scripts. Unfortunately, this made any scripts that used debconf impossible. So, either we ban scripts that are interactive, or scripts that scribble on stdout. Since the former makes some functionality impossible (some scripts can deliver added functionality and flexibility if they can interact with users), and the latter just needs a code change, I would prefer to ask packages that provide scripts to be used in kernel image postinst/postrm to use debconf for user interaction, and to send diagnostics to STDERR. (Closes: #344413). -- Manoj Srivastava Sun, 25 Dec 2005 10:14:33 -0600 kernel-package (10.024) unstable; urgency=low * Bug fix: "kernel-package: fails to build for KPKG_ARCH=uml", thanks to Libor Klepac (Closes: #344427). -- Manoj Srivastava Thu, 22 Dec 2005 20:47:53 -0600 kernel-package (10.023) unstable; urgency=low * Do not append 1>&2 to the invocation of hook scripts. This means that the hook scripts should not write to stdout, since despite db_stop debconf does not restore stdout. The reason because we no longer redirect is that some scripts may need to use debconf themselves, so this change helps them (at the expense of other scripts that wrote to stdout). (Closes: #344413). -- Manoj Srivastava Thu, 22 Dec 2005 10:07:49 -0600 kernel-package (10.022) unstable; urgency=low * Bug fix: "bug in initrd.mk prevents make-kpkg from creating dependency on initrd-tools", thanks to Nikita V. Youshchenko (Closes: #344393). -- Manoj Srivastava Thu, 22 Dec 2005 07:56:23 -0600 kernel-package (10.021) unstable; urgency=low * Bug fix: "make-kpkg clean does not work on x86_64", thanks to Junichi Uekawa. Well, we set architecture now to default to what the kernel calls the arch. (Closes: #344335). * Bug fix: "/lib/modules/$kver/modules.ofmap should be removed in postrm", thanks to Theodore Y. Ts'o (Closes: #344362). -- Manoj Srivastava Thu, 22 Dec 2005 00:28:17 -0600 kernel-package (10.020) unstable; urgency=low * Fix issues with conf.vars. Make build.arch also depend on conf.vars. * Bug fix: ""kernel source package used" is not written in buildinfo", thanks to Alexandros Vellis (Closes: #344007). -- Manoj Srivastava Mon, 19 Dec 2005 20:14:02 -0600 kernel-package (10.019) unstable; urgency=low * Bug fix: "kernel-package: modules_clean target creates changelog with wrong revision", thanks to Michael Spang. Firstly, the wrong version number should make no difference to the module being cleaned -- after all, it is a clean. The creation of ./debian is an inconvenience, so now make-kpkg would refuse to run modules_* unless you already have a ./debian directory. And, as far as I know, modules_clean is not actually required by any modules package packaged in Debian, it is merely a disk space conserving convenience thing. (Closes: #343559). -- Manoj Srivastava Sat, 17 Dec 2005 08:10:28 -0600 kernel-package (10.018) unstable; urgency=low * Also install arch/$(KERNEL_ARCH)/Makefile.cpu in the headsers package, since it is needed by newer kernels. Thanks to Stefan Lippers-Hollmann. * When done with debconf, call stop: this shall help prevent errors if the hook scripts write to stdout. Also, when calling the hook scripts, redirect stdout to stderr, just in case -- and to ensure that the messages do not silently disappear. * Bug fix: "kernel-package: FTBFS: Missing Build-Depends on debconf", thanks to Daniel ScheplerAlso, since we now use debconf in all the postinst file, but do not build depend on it, ignore some test errors while building. This is far better solution, since we can't load debconf as non root anyway. (Closes: #343170). -- Manoj Srivastava Tue, 13 Dec 2005 14:29:21 -0600 kernel-package (10.017) unstable; urgency=low * Somehow, arm.mk never made it into the 10.X series -- so it was not possible to build images on ARM. Fixed. -- Manoj Srivastava Fri, 9 Dec 2005 15:05:24 -0600 kernel-package (10.016) unstable; urgency=low * There was a logic error in the ramfs selection tool logic, such that the code always acted as if the kernel version was (> 2.6.8) && (<= 2.6.12). Fixed . -- Manoj Srivastava Wed, 7 Dec 2005 09:57:50 -0600 kernel-package (10.015) unstable; urgency=low * Bug fix: "kernel-package: Error setting debconf flags in generated linux image", thanks to Ruben Porras. Darn. Don't emit messages to STDOUT, we are now using debconf, which gets all confused. (Closes: #342143). -- Manoj Srivastava Mon, 5 Dec 2005 15:43:33 -0600 kernel-package (10.014) unstable; urgency=low * Bug fix: "buggy find option -- broken build", thanks to Marc Dequènes (Closes: #342062). * Bug fix: "make-kpkg doesn't work with make 3.80-9", thanks to Adam Heath (Closes: #342066). -- Manoj Srivastava Sun, 4 Dec 2005 23:12:33 -0600 kernel-package (10.013) unstable; urgency=low * Minor clean ups. Made the postinst script a trifle more verbose to help in diagnosing errors. -- Manoj Srivastava Sun, 4 Dec 2005 15:11:44 -0600 kernel-package (10.012) unstable; urgency=low * It was pointed out to me that the ability to build third party modules using make-kpkg and linux kernel headers packages had broken with recent kernel packages, since the check for whether we were in a top level kernel source directory failed to take into account if we were in a header package directory, which is sufficient. * Additionally, older kernel-package versions appear to want to run oldconfig in the headers package tree, which failed, since there was inadequate support for running oldconfig. This has also been fixed, since all we really need to depend on is a .config file. * Finally, make-kpkg insists on there being a ./debian directory, and it makes sense to ship the directory in the source and header packages, since shipping it means that we also remove the need for kernel-package to be installed on the target system -- Manoj Srivastava Sat, 3 Dec 2005 02:55:33 -0600 kernel-package (10.011) unstable; urgency=low * Bug fix: "DEBIAN/ directory doesn't appear to exist at image_clean_hook time", thanks to Don Armstrong. Moved the hooks for image and headers later in the process. (Closes: #339659). * Bug fix: "kernel-package: kernel-image-deb mentioned in README.gz but removed in 10.x", thanks to Marc Haber. Well. The new name is stamp-kernel-image. Changed docs, and added kernel-image-deb temporarily as an alias. (Closes: #340978). -- Manoj Srivastava Thu, 1 Dec 2005 15:30:27 -0600 kernel-package (10.010) experimental; urgency=low * Bug fix: "kernel-package: Fails to build ppc64 2.6.14 kernel", thanks to Juergen Kreileder. Sven Luther provided the patch (Closes: #338449). -- Manoj Srivastava Thu, 10 Nov 2005 21:47:09 -0600 kernel-package (10.009) experimental; urgency=low * The long obsolete --flavour option is now gone, and --apend-to-version should be used. Also, --append-to-version may soon be superceded with --abi, stay tuned. * Speed up the stripping code in kernel header packages, by only looking at the scripts directory (which was the only place with the elf binaries). -- Manoj Srivastava Wed, 9 Nov 2005 22:55:55 -0600 kernel-package (10.008) experimental; urgency=low * Well, it turns out that only on some architectures do we havea binary using a dynamically loaded shared library, so the call to dpkg-shlibs was failing on the others. Now, go throug a complex dance in which we either call dpkg-shlibs, or edit the control file using Perl, so that both cases can be catered to. -- Manoj Srivastava Tue, 8 Nov 2005 08:51:08 -0600 kernel-package (10.007) experimental; urgency=low * Aaargh, typo in the kernel header rules. * The generated packages should not have native version numbers by default, since they are not really debain native packages. The problem was that the default version generated did not have a -, so chnaged that value. The files affected are kernel-pkg.conf, README, kernel/ruleset/misc/version_vars.mk , kernel-pkg.conf.5, kernel/docs/README, kernel/ruleset/misc/config.mk. * While looking at Lintian errors, I noticed that apparently kernel-headers package carries with it an elf binary, and thus should depend on the shared libraries -- but did not. Fixed now by a search and a call to dpkg-shlibs. Various minor nitpicks in the default Control file also fixed. * We also added a make snippet to find and strip the binaries we need to run dpkg-shlibs upon, since that is the policy. * kernel/ruleset/targets/image.mk: Export the variable IMAGE_TOP before calling scripts in $(SRCTOP)/debian/image.d and debian/post-install, since that is what they expected. Bad idea changing an exposed interface. * kernel/pkg/image/postrm: Call purge to remove the questions from debconf database when the package is purged. -- Manoj Srivastava Tue, 8 Nov 2005 01:03:49 -0600 kernel-package (10.006) experimental; urgency=low * Hmm. We need to take special care of the case in which the kernel-headers are installed after the kernel-image has been; and the build symlink is not setr. In this case, the header postinst now correctly installs the build symlink. -- Manoj Srivastava Mon, 7 Nov 2005 12:44:21 -0600 kernel-package (10.005) experimental; urgency=low * Bug fix: "kernel/image.postinst should mention GRUB", thanks to Martin Michlmayr. Well, I don't see why we should mention _any_ boot loader at all, so we are no longer biased against grub. (Closes: #336927) * Bug fix: "kernel-package: Using dpkg --remove followed by dpkg --install does not restore the kernel package", thanks to Daniel Jacobowitz. Also: "kernel-package tells me we're being reinstalled AND updated". Actually, the installed/updated is just sematics; when you reinstall a kernel image you are updating it, and vice versa. The actual problem was that while the symbolic links were removed when the package was removed, dpkg passed the last-version-configured to the postinst, and we took that as evidence that the package had been installed before -- which, while true, did not take into account that the package was currently uninstalled. The fix is to always see if a missing symlink needs to be installed, and not touch existing symlinks. (Closes: #336733, #336517). * Added kernel/pkg/headers/create_link as an example. The user can install it in the postinst.d directory to set up the /lib/modules/foo/build symlink to point to the kernel-headers. This is not needed, since the kernel-image postinst already checks in the /usr/src/ directory for an installed kernel headers package. * Convert the image prerm scripts to debconf as well, the questions are asked if we try to remove the running kernel image, or if we are removing a kernel version mentioned in boot loader configuration. * Have the minimal.mk not overwrite the control or the changelog file. * Added a whole slew of config files, and updated older ones, to bring the configurations offered up by default to be more in line with official kernels. * Fixed substitutions in the kernel image package, there was a duplicate =B substitution. * Ran lintian on all the generated packages. Fixed FSF address in all the copyright notices, and fixed case in the templates file as well. This shall be the last experimental release, barring major problems. -- Manoj Srivastava Mon, 7 Nov 2005 10:44:39 -0600 kernel-package (10.004) experimental; urgency=low * Bug fix: "using debconf", thanks to Robert Millan (Closes: #115884) * Bug fix: "does not install non-interactively", thanks to Matt Kraai (Closes: #247782) * This fine tunes the dependencies between targets. All of the package building targets are ones that insert themselves into the normal flow of policy specified targets, so they must hook themselves into the stream. That means, in essence, that they must depend on the configure and corresponding build targets (with stamps) and ensure that the prep work is all done before they are invoked. The advantage is that nothing is going to be remade more often than it needs to. It also means we do not need to produce as many stamp files. So, the only dependencies on any of the intermediate targets are targets that have not been registered into the ladder created in rulesets/common/targets.mk * The kernel image maintainer scripts have been greatly changed. Firstly, they now use debconf; and a number of questions have been moved to the config file (create-kimage-link-$version, old-initrd-link, old-dir-initrd-link, old-system-map-link) while others are asked conditionally in the postinst (depmod-error, depmod-error-initrd, bootloader-test-error, bootloader-error). The postinst has also become far less verbose; the users are far better educated a decade after this was written, and there are other sources of information about booting than the postinst of a kernel image. * The preinst also uses debconf. All the questions asked are still here -- we just use debconf to ask the user. Also, the priority, and need to break non-interactive installs was re-evaluated, and the preinst breaks in far fewer cases than it did before. * Second, the postinst gets rid of the code that generated boot floppies and created lilo.conf (that latter was probably illegal under current policy anyway). The do_boot_enable and do_boot_floppy configuration variables in /etc/kernel-img.conf are now invalid. * Also, the source tree is not automatically cleaned; the do_clean configuration variable, and the environment variable CLEAN_SOURCE are now control if the source tree is optionally cleaned after the kernel image package is built. -- Manoj Srivastava Thu, 3 Nov 2005 23:26:29 -0600 kernel-package (10.003) experimental; urgency=low * Bug fix: "can not clean up the kernel source tree", thanks to Chun-Chung Chen. (Closes: #336409) * Bug fix: "kernel-package creates packages depending on linux-initramfs-tools, should use linux-initramfs-tool", thanks to Thomas Luzat. (Closes: #336724) * Bug fix: "/usr/share/doc/kernel-package seems to contain broken symlinks", thanks to Thomas Luzat (Closes: #336744) * This is a major reorganization of the rules file that helps create kernel related packages. The crusty old mechanism has been removed, the targets are now streamlined, and the policy mandated dependencies are now called out into a separate file. This should allow a future enhancement to allow end users to override the behavior of kernel-package in a fine grained fashion. Also, separating out the variable setting for each arch into a separate file should facilitate the delegation of that file to the person responsible for kernel images for that architecture. And, separating out the policy mandated targets into fine grained double colon targets allows people to add in any additional make targets for a particular architecture, something long requested. One of the factors that made the build mechanism so complex was that the rules file had a dual purpose: Initially, when ./debian was not present or not populated, it was responsible for populating that, and then it was responsible for building the kernel packages, incorporating any user customizations. Unfortunately, since Make reads all the commands at startup, it was difficult to incorporate any customizations, but the modularization of the rules file makes it possible to have two top level files, a minimal make file whose sole responsibility is to populate ./debian (and run clean even when ./debian does not exist), and which uses some of the same variable setting make snippets that the final top level Make file uses when it resides in ./debian. The task of deciding which top level makefile to use has now been relegated to /usr/bin/make-kpkg -- which, if there ./debian is empty or not present, first calls the minimal Makefile to populate it, and _then_ calls the real ./debian/rules file to perform the actual task that it was asked. This little intelligence in make-kpkg allows the minimal makefile, and ./debian/rules, to be far simpler, and allows them to conform to the standards my other Debian packages adhere to. The goal of this release was to handle the bugs in the previous experimental release, but to create a set of packages indistinguishable from the ones created before. Pointedly, non-of the minor lacunae in the Debian kernel image postinst scripts have been addressed yet. Also, the build process is a little more verbose at the moment than it needs to be. -- Manoj Srivastava Wed, 2 Nov 2005 14:16:19 -0600 kernel-package (10.002) experimental; urgency=low * Bug fix: "kernel-package: Problem with kernel_version.mk causes build fauilure", thanks to Horms (Closes: #335993). * This is a fairly large reorganization of the directory and file layout for the package. Instead of a mostly flat directory structure with a giant monolithic rules files, we are moving towards a more organized structure, with finer granularity of files, which may in the future facilitate third party replacement and overriding of parts of the build mechanism. Also, this reorganization may make the overall structure easier to see (though it may also result in it being harder to get the big picture, but I doubt that). This time around, I am trying to keep substantive changes to a minimum, so files have just been broken up, moved around, but the package should still more or less behave the way that it always did (apart from changing the stem). * kernel/rules (DEBDIR): Test to see if we have ./debian/kernel_version.mk, since all kinds of other people create ./debian * Makefile (install): Adjust for the reorganization of the files, since the source files are no longer in their previous locations. Keep the destination mostly the same. * kernel/rules: This is the one file that has faced the brunt of the changes. Large chunks of it have been moved out into separate chunks included in this file. The major addition has been are mechanisms to allow the file to be broken up. The parts removed are o) dpkg-architecture variable are now moved out to ruleset/common/archvars.mk o) The variables set in the file have mostly been moved to ruleset/local-vars.mk, which shall be further broken up into smaller parts o) For example, the per arch variable settings have already been moved out of ruleset/local-vars.mk into ruleset/architecture.mk -- and shall be further fragmented into files in ruleset/arches/, so that it would be easier to delegate ownership to domain experts. o) The action/rules part of the file have been broken out to ruleset/local.mk -- and shall be broken out into ruleset/common/targets.mk (which contain policy mandated targets, and their dependencies, and ruleset/actual_rules.mk, where the grunt work shall be done. It may make sense to further divide ruleset/actual_rules.mk into separate files for images, headers, doc, and manual packages. At a later stage, actually installing files into ./debian/tmp- shall be separated out from the subsequent packaging into separate targets (probably in the same file), to allow finer granularity for debugging. -- Manoj Srivastava Fri, 28 Oct 2005 09:03:41 -0500 kernel-package (10.001) experimental; urgency=low * Bug fix: "doesn't install: Internal Error: Could not find image (/boot/vmlinuz-2.4.27-xxs1500)", thanks to Martin Michlmayr. Well, calling kimage vmlinux.srec was breaking the postinst. However, kimage does not seem to be used anywhere except in determining the next value, namely, kimagesrc -- so I just added .srec to kimagesrc, and thus eliminated the need for hacking the postinst. So the fix was earlier in the build process, and not deferred to the postinst. (Closes: #333220). * Acknowledge the changes made for initrd stuff in the NMU series. Thanks to Sven Luther for the work. I have made some changes, for example, instead of hard-coding the list of initrd tools one considers in the installation phase, now one can set that list by editing /etc/kernel-pkg.conf -- and this replaces the hard coded list. Of course, the admin at the target location can still over-ride that list by editing /etc/kernel-img.con (note, not the same as /etc/kernel-pkg.conf above); this makes things slightly more flexible. Also, the list of commands does not have to be the fully qualified path, the postinst and preinst use the PATH variable to find the commands. * kernel-img.conf.5: Document the fact that the ramdisk variable can now be a space separated list of init ram disk creation commands, which need to also support the --supported-host-version and --supported-target-version options, just like mkinitrd does. This is the list tried at installation time. * kernel-pkg.conf.5: Document the fact that one can provide the default values for the list by setting INITRD_CMD, but this list can be overridden by the one in kernel-img.conf.5. However, the defaults are set to a subset of "mkinitrd mkinitrd.yaird mkinitramfs", the subset being decided based on the version of the kernel being built, so one should refrain from setting this manually -- unless one knows what one is doing. * kernel/image.postrm, kernel/image.prerm: Added new variable for the initrd dependency, and also modified the variable ramdisk to be a space separated list of commands, not just a single command. * kernel/image.postinst, kernel/image.preinst: Added new variable for the initrd dependency, and also modified the variable ramdisk to be a space separated list of commands, not just a single command. (find_inird_tool): Added function to determine the list of viable initrd creation tools present on the target system, and use it to select which tool to use for creating the ram fs. * Bug fix: "'man make-kpkg' typo: 'thatthis'", thanks to A Costa (Closes: #335316). -- Manoj Srivastava Tue, 25 Oct 2005 04:00:35 -0500 kernel-package (9.008.4) unstable; urgency=low * Some small fixes. -- Sven Luther Mon, 24 Oct 2005 11:04:19 +0000 kernel-package (9.008.3) unstable; urgency=low * ramdisk generation tools now return 2 on --supported-* negative, so we can now add overrides for non- --supported-* supporting tools. -- Sven Luther Mon, 24 Oct 2005 10:34:46 +0200 kernel-package (9.008.2) unstable; urgency=low * Second take on the ramdisk generation tool resolution. Thanks go to Jonas Smedegaar and Steve Langasek for proposing this solution, and all others who discussed this. * Removed again conflicts since we can now handle legacy ramdisk generation tools. -- Sven Luther Sun, 23 Oct 2005 16:21:46 +0200 kernel-package (9.008.1) unstable; urgency=low * NMU with maintainer's permission. * Implement the new ramdisk generation tool finding plan. Thanks go to Mattia Dongili for helping me out with the needed perl code. * Added conflict with older version of the ramdisk generating tools to the resulting kernel-image package. * Upgraded manpage to reflect those changes. -- Sven Luther Thu, 20 Oct 2005 14:05:12 +0000 kernel-package (9.008) unstable; urgency=low * Bug fix: "xen.postinst contains illegal sed command", thanks to Michael Tautschnig (Closes: #329373). * Bug fix: "Fix netboot for mips ELF32 arc firmware", thanks to Thiemo Seufer (Closes: #329081). * Bug fix: "kernel-package: powerpc kernel packages don't remove cleanly", thanks to Eric Cooper (Closes: #327361). * Bug fix: "Give warnings during preconfigure, not during install", thanks to Bas Wijnen (Closes: #328784). -- Manoj Srivastava Wed, 28 Sep 2005 08:22:37 -0500 kernel-package (9.007) unstable; urgency=low * Update for MIPS kernels, thanks to Thiemo Seufer. (Closes: #323428). -- Manoj Srivastava Wed, 31 Aug 2005 10:30:18 -0500 kernel-package (9.006) unstable; urgency=low * Bug fix: "kernel-package: Modules placed in wrong directory when building user mode linux kernels", thanks to Paul Dwerryhouse (Closes: #323018). * Ever since we added section 9 man pages to the kernel-doc package, one can no longer install two different versions of the kernel-doc package simultaneously. Since this was deemed to be undesirable, now we have split off a kernel-manual-X.Y.Z package to provide kernel man pages. This works for 2.6 kernels, and I hope does not cause issues for older kernels. Please note that while one may install any number of kernel-doc packages at one time, only one kernel-manual package is supposed to be installed at any given time. * Bug fix: "kernel-package: typo in make-kpkg.1.gz", thanks to Henrik Holmboe (Closes: #322693). -- Manoj Srivastava Mon, 15 Aug 2005 23:42:08 -0500 kernel-package (9.005) unstable; urgency=low * Bug fix: "linux-2.6: [powerpc] does not include mkvmlinuz support", thanks to Sven Luther (Closes: #320798). * Bug fix: "linux-headers-2.6.12: header_postinst_hook is called twice in postinst", thanks to Peter Marschall (Closes: #320416). * Bug fix: "kernel-package: relink_src_link (in code) vs. relink_source_link (in man page) discrepancy", thanks to Peter Marschall (Closes: #320424). * Bug fix: "'man make-kpkg' typos: "coumentation","similiar", "tp", etc.", thanks to A Costa (Closes: #320561). * Bug fix: "'man kernel-img' typos: "absense", "initail", "issueing" x 2, "laoder", and "varable"", thanks to A Costa (Closes: #320562). * Bug fix: "'man kernel-pkg' typos: "Mutualy", "confguration", "differes", "instablity", "numberd", "similarily", and "usefule"", thanks to A Costa (Closes: #320563). * Bug fix: "'man make-kpkg' typo: "ro"", thanks to Martin Zobel-Helas (Closes: #321444). -- Manoj Srivastava Sun, 7 Aug 2005 10:45:11 -0500 kernel-package (9.004) unstable; urgency=low * Bug fix: "new kernel-package creates ridiculous symlinks in /boot", thanks to Itai Seggev (Closes: #319543, #319657). * Bug fix: "kernel-package: Wrong symbolic link vmlinux in /boot", thanks to Bin Zhang (Closes: #319452). * Bug fix: "new kernel-package creates ridiculous symlinks in /boot", thanks to Itai Seggev (Closes: #319515). * Bug fix: "Syntax error in kernel rules file", thanks to Jordi Mallach (Closes: #319632). * Bug fix: "linux-image-2.6.12-1-686: /vmlinuz and /initrd symlinks were botched after installing 2.6.12", thanks to Andrew Moise (Closes: #319664). * Bug fix: "kernel-package: Please support kernel building on the ppc64 architecture", thanks to Andreas Jochens (Closes: #320055). -- Manoj Srivastava Thu, 28 Jul 2005 00:13:15 -0500 kernel-package (9.003) unstable; urgency=low * Fix an unterminated variable reference. -- Manoj Srivastava Wed, 20 Jul 2005 07:54:26 -0500 kernel-package (9.002) unstable; urgency=low * Bug fix: "kernel-package: Spelling error in rules file", thanks to Peter Marschall (Closes: #317638). * Bug fix: "kernel-package: Spelling error in rules file", thanks to Aaron Howell (Closes: #313338). * Bug fix: "kernel-package: Missing 'scripts' directory in kernel-headers produced by make-kpkg", thanks to Marc L. de Bruin. Also added Module.symvers, thanks to Ryan Underwood for pointing that out. (Closes: #315858). * Bug fix: "describe -stem in the manpage", thanks to dann frazier (Closes: #318397). * Bug fix: "kernel-package: possibly missing xargs option in rules file", thanks to Rob Browning (Closes: #318378). * Bug fix: "kernel-package: Please consider adding (or commenting on) this official powerpc/ppc64 patch", thanks to Sven Luther (Closes: #318431). * Bug fix: "kernel-package: please include more --config options", thanks to Andres Salomon (Closes: #318962). -- Manoj Srivastava Tue, 19 Jul 2005 10:34:06 -0500 kernel-package (9.001) unstable; urgency=low * The previous solution was only one half of the problem: we had made kernel_arch available to the maintainer scripts, but had not exported the variable to the hook scripts that the maintainer scripts run. This is the second half of that work. * Bug fix: "/u/s/k-p/image.postinst: $force_move logic recently broke", thanks to Aaron M.; "kernel-package: symlinks in /boot aren't update for packages created with make-kpkg", thanks to Itai Seggev. These are the same bug, and indeed, as Aaron analyzed, were cause by a misplaced '}'. (Closes: #313312, #312917). * Thanks to Ubuntu and jbailey, there is now a new variable in /etc/kernel-img.conf: ramdisk, which allows the admin to choose a different program than /usr/sbin/mkinitrd for initrd generation. * Added a few bits and pieces for powerpc64 into the rules file. I am not sure I understand why one can't ever cross compile powerpc64 images, but I am adding this in for the duration. This work reflects changes in Ubuntu. * Bug fix: "Fails with make: i486-linux-gnu-gcc: Command not found", thanks to Nacho Más (Closes: #313053). -- Manoj Srivastava Mon, 13 Jun 2005 01:25:33 -0500 -- Please support Xen 3.0.2 by syncing to debian version 10.043+ https://launchpad.net/malone/bugs/39948 From tom.ubuntu at thoughtcrime.org.nz Tue Apr 18 10:51:10 2006 From: tom.ubuntu at thoughtcrime.org.nz (cartel) Date: Tue, 18 Apr 2006 10:51:10 -0000 Subject: [Bug 39948] Merge notes References: <20060418040918.1627.2094.malonedeb@gangotri.ubuntu.com> Message-ID: <20060418105110.16443.62096.malone@gandwana.ubuntu.com> Hi Ben, Makefiles really arent my thing (I took one look at Manoj's patches and my first instinct was to convert them to rake) but I can hack them if required. If you dont have time to do this I could probably do a butchers job and get the Xen stuff into ubuntu as a diff. Hopefully you do have time to do it right :-) Thanks in advance Tom -- Please support Xen 3.0.2 by syncing to debian version 10.043+ https://launchpad.net/malone/bugs/39948 From mdz at ubuntu.com Tue Apr 18 10:58:55 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Tue, 18 Apr 2006 10:58:55 -0000 Subject: [Bug 39985] amd64 boot prints messages even with 'quiet' References: <20060418105855.1684.67321.malonedeb@gangotri.ubuntu.com> Message-ID: <20060418105855.1684.67321.malonedeb@gangotri.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Minor Priority: (none set) Assignee: Ben Collins Status: Unconfirmed Description: Even when 'quiet' is used (as with usplash), I see two kernel messages: kernel direct mapping tables ... Booting the kernel These should be suppressedfor the release. ** Changed in: linux-source-2.6.15 (Ubuntu) Severity: Normal => Minor Assignee: (unassigned) => Ben Collins Target: None => ubuntu-6.06 -- amd64 boot prints messages even with 'quiet' https://launchpad.net/malone/bugs/39985 From apeeters at lashout.net Tue Apr 18 11:09:52 2006 From: apeeters at lashout.net (Adriaan Peeters) Date: Tue, 18 Apr 2006 11:09:52 -0000 Subject: [Bug 36119] Re: external usb keyboard dead after suspend/resume References: <20060323090614.10163.64654.malonedeb@gangotri.ubuntu.com> Message-ID: <20060418110952.16443.96371.launchpad@gandwana.ubuntu.com> ** Attachment added: "dmesg output suspend/resume cycle 2.6.15-19-386" http://librarian.launchpad.net/2142394/usb.dmesg -- external usb keyboard dead after suspend/resume https://launchpad.net/malone/bugs/36119 From keith at barnabasmusic.com Tue Apr 18 11:51:08 2006 From: keith at barnabasmusic.com (Geo_KM) Date: Tue, 18 Apr 2006 11:51:08 -0000 Subject: [Bug 39276] Re: Fails to compile using config from dapper References: <20060412095035.24516.46392.malonedeb@gangotri.ubuntu.com> Message-ID: <20060418115108.1684.61820.malone@gangotri.ubuntu.com> Im no idiot, ofcourse I did that. It doesnt compile unlss I unset the option in the config. Listen, I hope you don't treat all bug reports so rudely...... If you think I am missing a vital package then what is it? cos' I had already done the build-dep before I first reported the bug. Prehaps build-dep for linux-source-2.6.15 is missing it? ** Changed in: linux-source-2.6.15 (Ubuntu) Priority: None => Medium Status: Rejected => Unconfirmed -- Fails to compile using config from dapper https://launchpad.net/malone/bugs/39276 From fabbione at ubuntu.com Tue Apr 18 11:57:54 2006 From: fabbione at ubuntu.com (Fabio Massimo Di Nitto) Date: Tue, 18 Apr 2006 11:57:54 -0000 Subject: [Bug 39948] Re: Please support Xen 3.0.2 by syncing to debian version 10.043+ References: <20060418040918.1627.2094.malonedeb@gangotri.ubuntu.com> Message-ID: <20060418115754.1684.63752.launchpad@gangotri.ubuntu.com> ** Changed in: kernel-package (Ubuntu) Severity: Normal => Wishlist -- Please support Xen 3.0.2 by syncing to debian version 10.043+ https://launchpad.net/malone/bugs/39948 From tom.ubuntu at thoughtcrime.org.nz Tue Apr 18 13:05:49 2006 From: tom.ubuntu at thoughtcrime.org.nz (cartel) Date: Tue, 18 Apr 2006 13:05:49 -0000 Subject: [Bug 39948] Re: Please support Xen 3.0.2 by syncing to debian version 10.043+ References: <20060418040918.1627.2094.malonedeb@gangotri.ubuntu.com> Message-ID: <20060418130549.16492.30760.launchpad@gandwana.ubuntu.com> ** Changed in: kernel-package (Ubuntu) Status: Unconfirmed => Rejected -- Please support Xen 3.0.2 by syncing to debian version 10.043+ https://launchpad.net/bugs/39948 From stephane.tranchemer at devinci.fr Tue Apr 18 13:04:31 2006 From: stephane.tranchemer at devinci.fr (Corsaire01) Date: Tue, 18 Apr 2006 13:04:31 -0000 Subject: [Bug 36158] Re: System does not shutdown References: <20060323145229.5380.85426.malonedeb@gangotri.ubuntu.com> Message-ID: <20060418130431.16443.91864.malone@gandwana.ubuntu.com> capacman> as you pointed it can (and it seems, must) have a relation with the bug you pointed, however the main problem here is : "what information can we provide to kernel developpers so they can have something to study ?" giving the dmidecode output is a step but is it enough ? What do you need ? How can we help ? -- System does not shutdown https://launchpad.net/bugs/36158 From mpatters at cs.uwaterloo.ca Tue Apr 18 14:01:05 2006 From: mpatters at cs.uwaterloo.ca (Mike Patterson) Date: Tue, 18 Apr 2006 14:01:05 -0000 Subject: [Bug 37430] Re: Crash during breezy->dapper upgrade References: <20060331041215.23707.99296.malonedeb@gandwana.ubuntu.com> Message-ID: <20060418140105.21557.71823.malone@gangotri.ubuntu.com> I can confirm this as well - I've got several machines at my disposal here and it only crashes on one of them. An Asus P4P800-VM with IDE disk works fine; VMWare Workstation 5.5 works fine; an Asus P5LD2-VM with SATA crashes. Booting off CD and chrooting then doing dpkg --configure fixed it up. I'll try in the next couple of days to get backtraces like Matt Zimmerman asks. -- Crash during breezy->dapper upgrade https://launchpad.net/bugs/37430 From burner at suppressingfire.org Tue Apr 18 14:07:26 2006 From: burner at suppressingfire.org (Michael R. Head) Date: Tue, 18 Apr 2006 14:07:26 -0000 Subject: [Bug 35213] Re: hibernate fails when not on AC power on HP Pavilion ZT3000 - regression from breezy References: <20060316170910.6510.54248.malonedeb@gangotri.ubuntu.com> Message-ID: <20060418140726.21557.62754.malone@gangotri.ubuntu.com> I get it on my thinkpad T30, too. -- hibernate fails when not on AC power on HP Pavilion ZT3000 - regression from breezy https://launchpad.net/bugs/35213 From burner at suppressingfire.org Tue Apr 18 14:11:15 2006 From: burner at suppressingfire.org (Michael R. Head) Date: Tue, 18 Apr 2006 14:11:15 -0000 Subject: [Bug 38625] Re: hibernate not working if on battery References: <20060407171435.24516.51893.malonedeb@gangotri.ubuntu.com> Message-ID: <20060418141115.21557.24289.malone@gangotri.ubuntu.com> This is probably a dupe of bug 35213 -- hibernate not working if on battery https://launchpad.net/bugs/38625 From rimbert at purdue.edu Tue Apr 18 14:15:36 2006 From: rimbert at purdue.edu (Michael Rimbert) Date: Tue, 18 Apr 2006 14:15:36 -0000 Subject: [Bug 40009] No reboot or shutdown with ipw2200 module loaded References: <20060418141536.8468.15600.malonedeb@gandwana.ubuntu.com> Message-ID: <20060418141536.8468.15600.malonedeb@gandwana.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: I am testing the Toshiba Tecra A2 for Canonical. Back in breezy, it was discovered that the laptop would not reboot or shutdown if the ipw2200 module was loaded. If I "modprobe -r ipw2200" prior to reboot or shutdown, it works fine. If not, the laptop remains in a powered state, not fully halting or shutting down. In 2.6.12-9.14, Matthew Garrett added a patch that fixed this issue: * drivers-net-wireless-ipw2200-shutdown-fix: Properly shutdown ipw2200 cards. Apparently this fix was lost. It also appears that attempts were made to add the fix back into 2.6.15-19.28: * ipw2200: quiesce on shutdown (lost from breezy, mjg59) However, the problem persists as of 2.6.15-20.30, which I am currently running. -- No reboot or shutdown with ipw2200 module loaded https://launchpad.net/bugs/40009 From jos_dehaes at fastmail.fm Tue Apr 18 14:44:47 2006 From: jos_dehaes at fastmail.fm (Jos Dehaes) Date: Tue, 18 Apr 2006 14:44:47 -0000 Subject: [Bug 38238] Re: prism54 no longer works References: <20060405180221.24486.72499.malonedeb@gangotri.ubuntu.com> Message-ID: <20060418144447.8468.63894.malone@gandwana.ubuntu.com> *** This bug is a duplicate of bug 38278 *** I can confirm blacklisting the islsm driver works with the -20 kernel. I have done this by creating a file /etc/modprobe.d/prism54 with the following content: ---8<-------- blacklist islsm_pci blacklist islsm ---8<-------- jos -- prism54 no longer works https://launchpad.net/bugs/38238 From mark at reitblatt.com Tue Apr 18 15:29:52 2006 From: mark at reitblatt.com (Mark Reitblatt) Date: Tue, 18 Apr 2006 15:29:52 -0000 Subject: [Bug 39958] Re: Trying to access unmounted SMBFS share in Rhythmbox causes entire system crash References: <20060418054930.1684.32955.malonedeb@gangotri.ubuntu.com> Message-ID: <20060418152952.8495.28196.malone@gandwana.ubuntu.com> Not a Rhythmbox bug (Kernel bug) ** Attachment added: "lspci output" http://librarian.launchpad.net/2150730/lspci.txt ** Changed in: rhythmbox (Ubuntu) Status: Unconfirmed => Rejected -- Trying to access unmounted SMBFS share in Rhythmbox causes entire system crash https://launchpad.net/bugs/39958 From evrgreen at netsync.net Tue Apr 18 16:36:32 2006 From: evrgreen at netsync.net (SilverBear) Date: Tue, 18 Apr 2006 16:36:32 -0000 Subject: [Bug 38231] Re: NEC CD-ROM drive not recognized References: <20060405174352.24486.41172.malonedeb@gangotri.ubuntu.com> Message-ID: <20060418163632.8495.64741.malone@gandwana.ubuntu.com> ### ### dapper 6.06 alpha /var/log/dmesg file ### ### [4294667.296000] Linux version 2.6.15-20-k7 (buildd at vernadsky) (gcc version 4.0.3 (Ubuntu 4.0.3-1ubuntu3)) #1 SMP PREEMPT Tue Apr 4 19:26:13 UTC 2006 [4294667.296000] BIOS-provided physical RAM map: [4294667.296000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable) [4294667.296000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) [4294667.296000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [4294667.296000] BIOS-e820: 0000000000100000 - 000000003fef0000 (usable) [4294667.296000] BIOS-e820: 000000003fef0000 - 000000003fef3000 (ACPI NVS) [4294667.296000] BIOS-e820: 000000003fef3000 - 000000003ff00000 (ACPI data) [4294667.296000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [4294667.296000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [4294667.296000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) [4294667.296000] 126MB HIGHMEM available. [4294667.296000] 896MB LOWMEM available. [4294667.296000] found SMP MP-table at 000f4190 [4294667.296000] On node 0 totalpages: 261872 [4294667.296000] DMA zone: 4096 pages, LIFO batch:0 [4294667.296000] DMA32 zone: 0 pages, LIFO batch:0 [4294667.296000] Normal zone: 225280 pages, LIFO batch:31 [4294667.296000] HighMem zone: 32496 pages, LIFO batch:7 [4294667.296000] DMI 2.2 present. [4294667.296000] ACPI: RSDP (v000 KT600 ) @ 0x000f7cd0 [4294667.296000] ACPI: RSDT (v001 KT600 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fef3040 [4294667.296000] ACPI: FADT (v001 KT600 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fef30c0 [4294667.296000] ACPI: MADT (v001 KT600 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fef8240 [4294667.296000] ACPI: DSDT (v001 KT600 AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x00000000 [4294667.296000] ACPI: PM-Timer IO Port: 0x4008 [4294667.296000] ACPI: Local APIC address 0xfee00000 [4294667.296000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [4294667.296000] Processor #0 6:10 APIC version 16 [4294667.296000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [4294667.296000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [4294667.296000] IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23 [4294667.296000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [4294667.296000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 dfl dfl) [4294667.296000] ACPI: IRQ0 used by override. [4294667.296000] ACPI: IRQ2 used by override. [4294667.296000] ACPI: IRQ9 used by override. [4294667.296000] Enabling APIC mode: Flat. Using 1 I/O APICs [4294667.296000] Using ACPI (MADT) for SMP configuration information [4294667.296000] Allocating PCI resources starting at 40000000 (gap: 3ff00000:bed00000) [4294667.296000] Built 1 zonelists [4294667.296000] Kernel command line: root=/dev/hda9 ro quiet splash [4294667.296000] mapped APIC to ffffd000 (fee00000) [4294667.296000] mapped IOAPIC to ffffc000 (fec00000) [4294667.296000] Initializing CPU#0 [4294667.296000] PID hash table entries: 4096 (order: 12, 65536 bytes) [4294667.296000] Detected 2008.838 MHz processor. [4294667.296000] Using pmtmr for high-res timesource [4294667.296000] Console: colour VGA+ 80x25 [4294668.590000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [4294668.591000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [4294668.627000] Memory: 1026476k/1047488k available (2083k kernel code, 20308k reserved, 595k data, 328k init, 129984k highmem) [4294668.627000] Checking if this processor honours the WP bit even in supervisor mode... Ok. [4294668.688000] Calibrating delay using timer specific routine.. 4019.68 BogoMIPS (lpj=2009842) [4294668.688000] Security Framework v1.0.0 initialized [4294668.688000] SELinux: Disabled at boot. [4294668.688000] Mount-cache hash table entries: 512 [4294668.688000] CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000 [4294668.688000] CPU: After vendor identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000 [4294668.688000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [4294668.688000] CPU: L2 Cache: 512K (64 bytes/line) [4294668.688000] CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000020 00000000 00000000 00000000 [4294668.688000] mtrr: v2.0 (20020519) [4294668.688000] Enabling fast FPU save and restore... done. [4294668.688000] Enabling unmasked SIMD FPU exception support... done. [4294668.688000] Checking 'hlt' instruction... OK. [4294668.692000] SMP alternatives: switching to UP code [4294668.692000] checking if image is initramfs... it is [4294669.207000] Freeing initrd memory: 6529k freed [4294669.223000] ACPI: Looking for DSDT ... not found! [4294669.248000] CPU0: AMD Athlon(tm) XP 2900+ stepping 00 [4294669.248000] Total of 1 processors activated (4019.68 BogoMIPS). [4294669.248000] ENABLING IO-APIC IRQs [4294669.249000] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [4294669.360000] Brought up 1 CPUs [4294669.360000] NET: Registered protocol family 16 [4294669.360000] EISA bus registered [4294669.360000] ACPI: bus type pci registered [4294669.373000] PCI: PCI BIOS revision 2.10 entry at 0xf9f10, last bus=1 [4294669.373000] PCI: Using configuration type 1 [4294669.373000] ACPI: Subsystem revision 20051216 [4294669.384000] ACPI: Interpreter enabled [4294669.384000] ACPI: Using IOAPIC for interrupt routing [4294669.385000] ACPI: PCI Root Bridge [PCI0] (0000:00) [4294669.385000] PCI: Probing PCI hardware (bus 00) [4294669.385000] ACPI: Assume root bridge [\_SB_.PCI0] bus is 0 [4294669.388000] Boot video device is 0000:01:00.0 [4294669.388000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [4294669.428000] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12) [4294669.428000] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 *11 12) [4294669.428000] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 11 12) *5 [4294669.429000] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12) *0, disabled. [4294669.429000] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12) *0, disabled. [4294669.429000] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12) *0, disabled. [4294669.430000] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 6 7 10 11 12) *0, disabled. [4294669.430000] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 6 7 10 11 12) *0, disabled. [4294669.431000] ACPI: PCI Interrupt Link [ALKA] (IRQs *20) [4294669.431000] ACPI: PCI Interrupt Link [ALKB] (IRQs *21) [4294669.432000] ACPI: PCI Interrupt Link [ALKC] (IRQs *22) [4294669.432000] ACPI: PCI Interrupt Link [ALKD] (IRQs *23) [4294669.435000] ACPI: Power Resource [PFAN] (off) [4294669.435000] Linux Plug and Play Support v0.97 (c) Adam Belay [4294669.435000] pnp: PnP ACPI init [4294669.440000] pnp: PnP ACPI: found 12 devices [4294669.440000] PnPBIOS: Disabled by ACPI PNP [4294669.440000] PCI: Using ACPI for IRQ routing [4294669.440000] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [4294669.458000] pnp: 00:01: ioport range 0x4000-0x407f could not be reserved [4294669.458000] pnp: 00:01: ioport range 0x5000-0x500f has been reserved [4294669.458000] PCI: Bridge: 0000:00:01.0 [4294669.458000] IO window: disabled. [4294669.458000] MEM window: e8000000-e9ffffff [4294669.458000] PREFETCH window: e0000000-e7ffffff [4294669.458000] PCI: Setting latency timer of device 0000:00:01.0 to 64 [4294669.459000] audit: initializing netlink socket (disabled) [4294669.459000] audit(1145361940.457:1): initialized [4294669.459000] highmem bounce pool size: 64 pages [4294669.459000] VFS: Disk quotas dquot_6.5.1 [4294669.459000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [4294669.459000] Initializing Cryptographic API [4294669.459000] io scheduler noop registered [4294669.459000] io scheduler anticipatory registered [4294669.459000] io scheduler deadline registered [4294669.459000] io scheduler cfq registered [4294669.459000] PCI: Bypassing VIA 8237 APIC De-Assert Message [4294669.459000] isapnp: Scanning for PnP cards... [4294669.816000] isapnp: No Plug & Play device found [4294669.829000] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [4294669.829000] serio: i8042 AUX port at 0x60,0x64 irq 12 [4294669.830000] serio: i8042 KBD port at 0x60,0x64 irq 1 [4294669.830000] Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled [4294669.830000] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [4294669.831000] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [4294669.832000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [4294669.832000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [4294669.832000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [4294669.832000] ACPI: bus type ide registered [4294669.832000] mice: PS/2 mouse device common for all mice [4294669.832000] EISA: Probing bus 0 at eisa.0 [4294669.832000] Cannot allocate resource for EISA slot 4 [4294669.832000] Cannot allocate resource for EISA slot 5 [4294669.832000] EISA: Detected 0 cards. [4294669.832000] NET: Registered protocol family 2 [4294669.841000] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [4294669.841000] TCP established hash table entries: 131072 (order: 8, 1572864 bytes) [4294669.844000] TCP bind hash table entries: 65536 (order: 7, 786432 bytes) [4294669.845000] TCP: Hash tables configured (established 131072 bind 65536) [4294669.845000] TCP reno registered [4294669.845000] TCP bic registered [4294669.845000] NET: Registered protocol family 1 [4294669.845000] NET: Registered protocol family 8 [4294669.845000] NET: Registered protocol family 20 [4294669.845000] Using IPI No-Shortcut mode [4294669.845000] ACPI wakeup devices: [4294669.845000] SLPB PCI0 USB3 USB4 USB5 USB6 USB7 LAN0 UAR1 ECP1 [4294669.845000] ACPI: (supports S0 S3 S4 S5) [4294669.845000] Freeing unused kernel memory: 328k freed [4294669.855000] input: AT Translated Set 2 keyboard as /class/input/input0 [4294669.912000] vga16fb: initializing [4294669.912000] vga16fb: mapped to 0xc00a0000 [4294670.046000] Console: switching to colour frame buffer device 80x25 [4294670.046000] fb0: VGA16 VGA frame buffer device [4294671.185000] Capability LSM initialized [4294671.214000] ACPI: Fan [FAN] (off) [4294671.217000] ACPI: CPU0 (power states: C1[C1] C2[C2]) [4294671.223000] ACPI: Thermal Zone [THRM] (40 C) [4294671.715000] SCSI subsystem initialized [4294671.716000] libata version 1.20 loaded. [4294671.718000] sata_via 0000:00:0f.0: version 1.1 [4294671.718000] **** SET: Misaligned resource pointer: df851ce2 Type 07 Len 0 [4294671.718000] ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 20 [4294671.718000] ACPI: PCI Interrupt 0000:00:0f.0[B] -> Link [ALKA] -> GSI 20 (level, low) -> IRQ 169 [4294671.718000] PCI: Via IRQ fixup for 0000:00:0f.0, from 11 to 9 [4294671.718000] sata_via 0000:00:0f.0: routed to hard irq line 9 [4294671.718000] ata1: SATA max UDMA/133 cmd 0xE000 ctl 0xE102 bmdma 0xE400 irq 169 [4294671.718000] ata2: SATA max UDMA/133 cmd 0xE200 ctl 0xE302 bmdma 0xE408 irq 169 [4294672.073000] ata1: dev 0 cfg 49:2f00 82:346b 83:7fe9 84:4773 85:3469 86:3c01 87:4763 88:407f [4294672.073000] ata1: dev 0 ATA-7, max UDMA/133, 160836480 sectors: LBA48 [4294672.073000] ata1: dev 0 configured for UDMA/133 [4294672.073000] scsi0 : sata_via [4294672.274000] ata2: no device found (phy stat 00000000) [4294672.274000] scsi1 : sata_via [4294672.274000] Vendor: ATA Model: HDS728080PLA380 Rev: PF2O [4294672.274000] Type: Direct-Access ANSI SCSI revision: 05 [4294672.280000] SCSI device sda: 160836480 512-byte hdwr sectors (82348 MB) [4294672.280000] SCSI device sda: drive cache: write back [4294672.283000] SCSI device sda: 160836480 512-byte hdwr sectors (82348 MB) [4294672.283000] SCSI device sda: drive cache: write back [4294672.283000] sda: sda1 sda2 sda3 [4294672.308000] sd 0:0:0:0: Attached scsi disk sda [4294672.526000] VP_IDE: IDE controller at PCI slot 0000:00:0f.1 [4294672.526000] ACPI: PCI Interrupt 0000:00:0f.1[A] -> Link [ALKA] -> GSI 20 (level, low) -> IRQ 169 [4294672.526000] PCI: Via IRQ fixup for 0000:00:0f.1, from 255 to 9 [4294672.526000] VP_IDE: chipset revision 6 [4294672.526000] VP_IDE: not 100% native mode: will probe irqs later [4294672.526000] VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.1 [4294672.526000] ide0: BM-DMA at 0xe600-0xe607, BIOS settings: hda:DMA, hdb:DMA [4294672.526000] ide1: BM-DMA at 0xe608-0xe60f, BIOS settings: hdc:DMA, hdd:DMA [4294672.526000] Probing IDE interface ide0... [4294672.912000] hda: WDC WD800JB-00FMA0, ATA DISK drive [4294673.167000] hdb: WDC WD3200JB-00KFA0, ATA DISK drive [4294673.218000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [4294673.218000] Probing IDE interface ide1... [4294708.293000] ide1: Wait for ready failed before probe ! [4294708.874000] hdd: ST3200822A, ATA DISK drive [4294708.925000] ide1 at 0x170-0x177,0x376 on irq 15 [4294708.931000] hda: max request size: 128KiB [4294708.941000] hda: 156301488 sectors (80026 MB) w/8192KiB Cache, CHS=65535/16/63, UDMA(100) [4294708.941000] hda: cache flushes supported [4294708.941000] hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 hda8 hda9 hda10 hda11 > [4294709.021000] hdb: max request size: 1024KiB [4294709.031000] hdb: 625142448 sectors (320072 MB) w/8192KiB Cache, CHS=38913/255/63, UDMA(100) [4294709.031000] hdb: cache flushes supported [4294709.031000] hdb: hdb1 hdb2 hdb3 hdb4 < hdb5 hdb6 hdb7 hdb8 > [4294709.088000] hdd: max request size: 1024KiB [4294709.089000] hdd: 390721968 sectors (200049 MB) w/8192KiB Cache, CHS=24321/255/63, UDMA(100) [4294709.089000] hdd: cache flushes supported [4294709.089000] hdd: hdd1 hdd2 hdd3 hdd4 < hdd5 hdd6 hdd7 hdd8 hdd9 hdd10 hdd11 hdd12 hdd13 hdd14 hdd15 hdd16 hdd17 hdd18 hdd19 hdd20 > [4294709.291000] hdd2: [4294710.404000] usbcore: registered new driver usbfs [4294710.404000] usbcore: registered new driver hub [4294710.406000] USB Universal Host Controller Interface driver v2.3 [4294710.406000] **** SET: Misaligned resource pointer: df8514a2 Type 07 Len 0 [4294710.407000] ACPI: PCI Interrupt Link [ALKB] enabled at IRQ 21 [4294710.407000] ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 177 [4294710.407000] PCI: Via IRQ fixup for 0000:00:10.0, from 10 to 1 [4294710.407000] uhci_hcd 0000:00:10.0: UHCI Host Controller [4294710.407000] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1 [4294710.407000] uhci_hcd 0000:00:10.0: irq 177, io base 0x0000e700 [4294710.407000] hub 1-0:1.0: USB hub found [4294710.407000] hub 1-0:1.0: 2 ports detected [4294710.509000] ACPI: PCI Interrupt 0000:00:10.1[A] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 177 [4294710.509000] PCI: Via IRQ fixup for 0000:00:10.1, from 10 to 1 [4294710.509000] uhci_hcd 0000:00:10.1: UHCI Host Controller [4294710.509000] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2 [4294710.509000] uhci_hcd 0000:00:10.1: irq 177, io base 0x0000e800 [4294710.509000] hub 2-0:1.0: USB hub found [4294710.509000] hub 2-0:1.0: 2 ports detected [4294710.610000] ACPI: PCI Interrupt 0000:00:10.2[B] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 177 [4294710.610000] PCI: Via IRQ fixup for 0000:00:10.2, from 11 to 1 [4294710.610000] uhci_hcd 0000:00:10.2: UHCI Host Controller [4294710.610000] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3 [4294710.610000] uhci_hcd 0000:00:10.2: irq 177, io base 0x0000e900 [4294710.610000] hub 3-0:1.0: USB hub found [4294710.610000] hub 3-0:1.0: 2 ports detected [4294710.711000] ACPI: PCI Interrupt 0000:00:10.3[B] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 177 [4294710.711000] PCI: Via IRQ fixup for 0000:00:10.3, from 11 to 1 [4294710.711000] uhci_hcd 0000:00:10.3: UHCI Host Controller [4294710.711000] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4 [4294710.711000] uhci_hcd 0000:00:10.3: irq 177, io base 0x0000ea00 [4294710.711000] hub 4-0:1.0: USB hub found [4294710.711000] hub 4-0:1.0: 2 ports detected [4294710.814000] ACPI: PCI Interrupt 0000:00:10.4[C] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 177 [4294710.814000] PCI: Via IRQ fixup for 0000:00:10.4, from 5 to 1 [4294710.814000] ehci_hcd 0000:00:10.4: EHCI Host Controller [4294710.814000] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 5 [4294710.814000] ehci_hcd 0000:00:10.4: irq 177, io mem 0xea000000 [4294710.814000] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [4294710.815000] hub 5-0:1.0: USB hub found [4294710.815000] hub 5-0:1.0: 8 ports detected [4294711.334000] Attempting manual resume [4294711.359000] EXT3-fs: mounted filesystem with ordered data mode. [4294711.376000] kjournald starting. Commit interval 5 seconds [4294720.177000] sd 0:0:0:0: Attached scsi generic sg0 type 0 [4294720.587000] Linux agpgart interface v0.101 (c) Dave Jones [4294720.590000] agpgart: Detected VIA KT400/KT400A/KT600 chipset [4294720.597000] agpgart: AGP aperture is 128M @ 0xd8000000 [4294720.756000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [4294720.758000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [4294721.093000] Real Time Clock Driver v1.12 [4294721.157000] input: PC Speaker as /class/input/input1 [4294721.418000] nvidia: module license 'NVIDIA' taints kernel. [4294721.423000] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 185 [4294721.423000] NVRM: loading NVIDIA Linux x86 Kernel Module 1.0-8756 Wed Mar 29 14:26:26 PST 2006 [4294721.428000] input: ImExPS/2 Generic Explorer Mouse as /class/input/input2 [4294721.514000] via-rhine.c:v1.10-LK1.2.0-2.6 June-10-2004 Written by Donald Becker [4294721.514000] **** SET: Misaligned resource pointer: f7df54c2 Type 07 Len 0 [4294721.514000] ACPI: PCI Interrupt Link [ALKD] enabled at IRQ 23 [4294721.514000] ACPI: PCI Interrupt 0000:00:12.0[A] -> Link [ALKD] -> GSI 23 (level, low) -> IRQ 193 [4294721.514000] PCI: Via IRQ fixup for 0000:00:12.0, from 10 to 1 [4294721.518000] eth0: VIA Rhine II at 0x1ec00, 00:50:8d:74:0f:19, IRQ 193. [4294721.519000] eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 45e1. [4294721.749000] parport: PnPBIOS parport detected. [4294721.749000] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA] [4294721.988000] via82xx: Assuming DXS channels with 48k fixed sample rate. [4294721.988000] Please try dxs_support=5 option [4294721.988000] and report if it works on your machine. [4294721.988000] For more details, read ALSA-Configuration.txt. [4294721.988000] **** SET: Misaligned resource pointer: f7df5342 Type 07 Len 0 [4294721.988000] ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22 [4294721.988000] ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [ALKC] -> GSI 22 (level, low) -> IRQ 201 [4294721.988000] PCI: Via IRQ fixup for 0000:00:11.5, from 5 to 9 [4294721.988000] PCI: Setting latency timer of device 0000:00:11.5 to 64 [4294721.999000] ts: Compaq touchscreen protocol output [4294722.007000] Floppy drive(s): fd0 is 1.44M [4294722.023000] FDC 0 is a post-1991 82077 [4294722.250000] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [4294722.930000] lp0: using parport0 (interrupt-driven). [4294722.981000] Adding 1365484k swap on /dev/hda5. Priority:-1 extents:1 across:1365484k [4294723.116000] EXT3 FS on hda9, internal journal [4294723.243000] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 [4294723.243000] md: bitmap version 4.39 [4294723.283000] NET: Registered protocol family 17 [4294724.137000] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel at redhat.com [4294725.202000] NET: Registered protocol family 10 [4294725.202000] lo: Disabled Privacy Extensions [4294725.202000] IPv6 over IPv4 tunneling driver [4294729.491000] kjournald starting. Commit interval 5 seconds [4294729.492000] EXT3 FS on hda10, internal journal [4294729.492000] EXT3-fs: mounted filesystem with ordered data mode. [4294729.493000] kjournald starting. Commit interval 5 seconds [4294729.493000] EXT3 FS on hda11, internal journal [4294729.493000] EXT3-fs: mounted filesystem with ordered data mode. [4294729.494000] kjournald starting. Commit interval 5 seconds [4294729.494000] EXT3 FS on hda6, internal journal [4294729.494000] EXT3-fs: mounted filesystem with ordered data mode. [4294729.495000] kjournald starting. Commit interval 5 seconds [4294729.495000] EXT3 FS on hda7, internal journal [4294729.495000] EXT3-fs: mounted filesystem with ordered data mode. [4294729.509000] kjournald starting. Commit interval 5 seconds [4294729.509000] EXT3 FS on hda8, internal journal [4294729.509000] EXT3-fs: mounted filesystem with ordered data mode. [4294729.601000] kjournald starting. Commit interval 5 seconds [4294729.601000] EXT3 FS on hdd6, internal journal [4294729.601000] EXT3-fs: mounted filesystem with ordered data mode. [4294729.612000] kjournald starting. Commit interval 5 seconds [4294729.612000] EXT3 FS on hdd7, internal journal [4294729.612000] EXT3-fs: mounted filesystem with ordered data mode. [4294729.624000] kjournald starting. Commit interval 5 seconds [4294729.624000] EXT3 FS on hdd8, internal journal [4294729.624000] EXT3-fs: mounted filesystem with ordered data mode. [4294729.636000] kjournald starting. Commit interval 5 seconds [4294729.636000] EXT3 FS on hdd9, internal journal [4294729.636000] EXT3-fs: mounted filesystem with ordered data mode. -- NEC CD-ROM drive not recognized https://launchpad.net/bugs/38231 From evrgreen at netsync.net Tue Apr 18 16:32:42 2006 From: evrgreen at netsync.net (SilverBear) Date: Tue, 18 Apr 2006 16:32:42 -0000 Subject: [Bug 38231] Re: NEC CD-ROM drive not recognized References: <20060405174352.24486.41172.malonedeb@gangotri.ubuntu.com> Message-ID: <20060418163242.21557.22707.malone@gangotri.ubuntu.com> It is the master on the second IDE channel [IDE 1,0] There are also two hdd's on IDE 0 and a third hdd, running as slave on the same channel as the NEC DVD RW ND3550A. Sorry, I don't know how to get a screenshot of the POST echo. Most of it goes by so fast I can hardly read it. I have the device when I boot Win2000, Mepis 3.4.3, Xandros 2.03 and Breezy. I'm not sure about Free BSD --I'm still playing around with getting that fully installed& running in my spare time. However, all of those OS's --and Dapper, too-- originally installed via a disk in the NEC DVD RW ND3550A device. I see in the /var/log/dmesg where we have a problem, but I don't know what the problem is or why it's occurring. see line: [4294708.293000] ide1: Wait for the ready failed before probe! The next line has hdd: ST3200822A being recognized. This is the slave on the ide1 channel. I'll attach the /var/log/dmesg file as a separate entry, since I need to switch to the machine where I have dapper installed [see below.] -- NEC CD-ROM drive not recognized https://launchpad.net/bugs/38231 From evrgreen at netsync.net Tue Apr 18 16:51:29 2006 From: evrgreen at netsync.net (SilverBear) Date: Tue, 18 Apr 2006 16:51:29 -0000 Subject: [Bug 38231] Re: NEC CD-ROM drive not recognized References: <20060405174352.24486.41172.malonedeb@gangotri.ubuntu.com> Message-ID: <20060418165129.8495.486.malone@gandwana.ubuntu.com> You may notice that in the original bug report, I state that the CD-ROM is not being detected by Breezy, whereas today in my answer to your question, I say that Breezy _does_ detect it. At some point between 060405 when I reported the bug, and 060411 when my log reports I tried burning a CD in Breezy, I use synaptic to install the linux kernel for k7 instead of the default 386 [My processor is an AMD Athlon XP 2900]. Unfortunately I did _not_ record the exact time/date of the synapic update to Breezy, nor did I immediately check to see if this is the exact time Breezy started recognizing the device! [sigh!] Since then, I did similarly upgrade the default 386 kernel in Dapper to the k7 version, but that has _not_ made any change in Dapper's ability to see the device. So, whether this whole kernel change aspect has any bearing on the affair, I really am not certain. Thanks, SilverBear -- NEC CD-ROM drive not recognized https://launchpad.net/bugs/38231 From albrecht.gebhardt at uni-klu.ac.at Tue Apr 18 17:20:03 2006 From: albrecht.gebhardt at uni-klu.ac.at (Albrecht Gebhardt) Date: Tue, 18 Apr 2006 17:20:03 -0000 Subject: [Bug 38278] Re: wifi card don't work. isl3886 is required but not installed References: <20060405203926.24486.7083.malonedeb@gangotri.ubuntu.com> Message-ID: <20060418172003.21557.69114.launchpad@gangotri.ubuntu.com> ** Attachment added: "reassign PCI IDs between prism54 and prism54_softmac driver" http://librarian.launchpad.net/2152994/prism54-fullmac-softmac.patch -- wifi card don't work. isl3886 is required but not installed https://launchpad.net/bugs/38278 From allan.stringer at gmail.com Tue Apr 18 17:15:13 2006 From: allan.stringer at gmail.com (Allan) Date: Tue, 18 Apr 2006 17:15:13 -0000 Subject: [Bug 20062] Re: Keyboard non-responsive when using kernel 2.6.12 (breezy) References: <20060113140508.21012.73082.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060418171513.21526.63547.malone@gangotri.ubuntu.com> Sorry for the long reply. The keyboard broke full stop and has only just been replaced. I've upgraded to dapper as of today (18/04/06) and the problem has gotten worse. When booting, the system will hang with the following lines: - ehci_hcd 0000.00.00.03.3: EHCI Controller ehci_hcd 0000.00.00.03.3: new USB bus registered, assigned bus number 3 ehci_hcd 0000.00.00.03.3: irq 185, io mem 0xdffef00 ehci_hcd 0000.00.00.03.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 hub 3-0:1.0: USB hub found hub 3-0:1.0: 6 ports detected If I plug the receiver in after the computer has booted, the system will freeze. This also happens with a usb mouse I own, the bug report can be found here: https://launchpad.net/distros/ubuntu/+bug/40015. Allan -- Keyboard non-responsive when using kernel 2.6.12 (breezy) https://launchpad.net/bugs/20062 From 84yelo3 at gmail.com Tue Apr 18 17:21:38 2006 From: 84yelo3 at gmail.com (=?utf-8?q?Nicol=C3=B2_Chieffo?=) Date: Tue, 18 Apr 2006 17:21:38 -0000 Subject: [Bug 38625] Re: [Bug 38625] Re: hibernate not working if on battery References: <20060407171435.24516.51893.malonedeb@gangotri.ubuntu.com> <20060418141115.21557.24289.malone@gangotri.ubuntu.com> Message-ID: <641322f90604181021n30f8d616w187c9344740abc89@mail.gmail.com> yes I think so... -- hibernate not working if on battery https://launchpad.net/bugs/38625 From albrecht.gebhardt at uni-klu.ac.at Tue Apr 18 17:34:09 2006 From: albrecht.gebhardt at uni-klu.ac.at (Albrecht Gebhardt) Date: Tue, 18 Apr 2006 17:34:09 -0000 Subject: [Bug 38278] Re: wifi card don't work. isl3886 is required but not installed References: <20060405203926.24486.7083.malonedeb@gangotri.ubuntu.com> Message-ID: <20060418173409.21526.33197.launchpad@gangotri.ubuntu.com> ** Attachment added: "firmware files for prism54_softmac" http://librarian.launchpad.net/2152996/add-firmware.tar.gz -- wifi card don't work. isl3886 is required but not installed https://launchpad.net/bugs/38278 From ghewson at cix.compulink.co.uk Tue Apr 18 18:34:41 2006 From: ghewson at cix.compulink.co.uk (Graeme Hewson) Date: Tue, 18 Apr 2006 18:34:41 -0000 Subject: [Bug 39862] [Flight 6] Marvell ethernet interface doesn' t work after reboot References: <20060417131032.16492.98385.malonedeb@gandwana.ubuntu.com> Message-ID: <20060418183441.21526.17391.launchpad@canonical@gangotri.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: I have a Toshiba Tecra M3 laptop. lshw shows the wired interface as: product: 88E8053 Gigabit Ethernet Controller vendor: Marvell Technology Group Ltd. After a cold boot, the interface works fine. However, if the machine is rebooted, the interface fails to work. For instance, Ethereal running on another machine doesn't see any of the expected DHCP broadcasts from the laptop. This is a dual-boot machine, and if Windows is booted instead after Kubuntu is shut down, the same problem occurs. This suggests the problem is something to do with what happens during shutdown. Following a cold or warm boot, "ethtool -i eth1" shows: driver: sky2 version: 1.1 firmware-version: N/A bus-info: 0000:02:00.0 Following a cold boot, "ethtool eth1" shows: Settings for eth1: Supported ports: [ TP ] Supported link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Half 1000baseT/Full Supports auto-negotiation: Yes Advertised link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Half 1000baseT/Full Advertised auto-negotiation: Yes Speed: 100Mb/s Duplex: Full Port: Twisted Pair PHYAD: 0 Transceiver: internal Auto-negotiation: on Current message level: 0x000000ff (255) Link detected: yes Following a warm boot, "ethtool eth1" shows: Settings for eth1: Supported ports: [ TP ] Supported link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Half 1000baseT/Full Supports auto-negotiation: Yes Advertised link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Half 1000baseT/Full Advertised auto-negotiation: Yes Speed: Unknown! (65535) Duplex: Unknown! (255) Port: Twisted Pair PHYAD: 0 Transceiver: internal Auto-negotiation: on Current message level: 0x000000ff (255) Link detected: no My Kubuntu installation is fully updated as of today. -- [Flight 6] Marvell ethernet interface doesn' t work after reboot https://launchpad.net/bugs/39862 From sitsofe at yahoo.com Tue Apr 18 18:30:40 2006 From: sitsofe at yahoo.com (Sitsofe Wheeler) Date: Tue, 18 Apr 2006 18:30:40 -0000 Subject: [Bug 39940] Re: repeatable panic when switching to console at X startup References: <20060418010356.16492.97883.malonedeb@gandwana.ubuntu.com> Message-ID: <20060418183040.8468.887.malone@gandwana.ubuntu.com> Shaya: The backtrace would be most helpful... However does the problem go away if you switch to radeon/ati/vesa drivers? -- repeatable panic when switching to console at X startup https://launchpad.net/bugs/39940 From sitsofe at yahoo.com Tue Apr 18 18:34:41 2006 From: sitsofe at yahoo.com (Sitsofe Wheeler) Date: Tue, 18 Apr 2006 18:34:41 -0000 Subject: [Bug 39862] Re: [Flight 6] Marvell ethernet interface doesn' t work after reboot References: <20060417131032.16492.98385.malonedeb@gandwana.ubuntu.com> Message-ID: <20060418183441.21526.48609.launchpad@gangotri.ubuntu.com> ** Changed in: Ubuntu Sourcepackagename: None => linux-source-2.6.15 -- [Flight 6] Marvell ethernet interface doesn' t work after reboot https://launchpad.net/bugs/39862 From arnaud.mazin at gmail.com Tue Apr 18 18:43:46 2006 From: arnaud.mazin at gmail.com (Arnaud) Date: Tue, 18 Apr 2006 18:43:46 -0000 Subject: [Bug 35319] Re: no Fn at all Vaio SZ1XP Dapper References: <20060317124552.11105.6446.malonedeb@gandwana.ubuntu.com> Message-ID: <20060418184346.8468.32491.malone@gandwana.ubuntu.com> I. As I was getting the same kind of trouble, I read sonypi.c and noticed that stelian was very accurate : type3 VAIO model is detected if an ICH6 chipset is found on the host. As my SZ1 has a ICH7, It falls back on a type2 behaviour. I simply had this to drivers/char/sonypi.c: --- drivers/char/sonypi.c~ 2006-04-18 19:58:19.878837000 +0200 +++ drivers/char/sonypi.c 2006-04-18 20:17:56.204352750 +0200 @@ -1341,6 +1341,9 @@ else if ((pcidev = pci_get_device(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_1, NULL))) sonypi_device.model = SONYPI_DEVICE_MODEL_TYPE3; + else if ((pcidev = pci_get_device(PCI_VENDOR_ID_INTEL, + PCI_DEVICE_ID_INTEL_ICH7_1, NULL))) + sonypi_device.model = SONYPI_DEVICE_MODEL_TYPE3; else sonypi_device.model = SONYPI_DEVICE_MODEL_TYPE2; And now, I'm getting the following log at module insertion : Apr 18 20:25:11 localhost kernel: sonypi: Sony Programmable I/O Controller Driver v1.26. Apr 18 20:25:11 localhost kernel: sonypi: detected type3 model, verbose = 0, fnkeyinit = off, camera = off, compat = off, mask = 0xffffffff, useinput = on, acpi = on Apr 18 20:25:11 localhost kernel: sonypi: enabled at irq=11, port1=0x1080, port2=0x1084 Apr 18 20:25:11 localhost kernel: sonypi: device allocated minor is 62 Apr 18 20:25:11 localhost kernel: input: Sony Vaio Jogdial as /class/input/input4 Apr 18 20:25:11 localhost kernel: input: Sony Vaio Keys as /class/input/input5 No more "command failed at drivers/char/sonypi.c" stuff And events like : Apr 18 20:34:06 localhost logger: sony/hotkey SPIC 00000001 00000020 Apr 18 20:34:06 localhost logger: ACPI group sony/hotkey / action SPIC is not defined Apr 18 20:34:09 localhost logger: sony/hotkey SPIC 00000001 0000000d Apr 18 20:34:09 localhost logger: ACPI group sony/hotkey / action SPIC is not defined Apr 18 20:34:10 localhost logger: sony/hotkey SPIC 00000001 0000003b Apr 18 20:34:10 localhost logger: ACPI group sony/hotkey / action SPIC is not defined Apr 18 20:34:10 localhost logger: sony/hotkey SPIC 00000001 0000000e Apr 18 20:34:10 localhost logger: ACPI group sony/hotkey / action SPIC is not defined Apr 18 20:34:10 localhost logger: sony/hotkey SPIC 00000001 0000003b Apr 18 20:34:10 localhost logger: ACPI group sony/hotkey / action SPIC is not defined Apr 18 20:34:10 localhost logger: sony/hotkey SPIC 00000001 0000000f Apr 18 20:34:10 localhost logger: ACPI group sony/hotkey / action SPIC is not defined Apr 18 20:34:10 localhost logger: sony/hotkey SPIC 00000001 0000003b Apr 18 20:34:10 localhost logger: ACPI group sony/hotkey / action SPIC is not defined Apr 18 20:34:11 localhost logger: sony/hotkey SPIC 00000001 00000010 Apr 18 20:34:11 localhost logger: ACPI group sony/hotkey / action SPIC is not defined Apr 18 20:34:11 localhost logger: sony/hotkey SPIC 00000001 0000003b Apr 18 20:34:11 localhost logger: ACPI group sony/hotkey / action SPIC is not defined Apr 18 20:34:11 localhost logger: sony/hotkey SPIC 00000001 00000011 Apr 18 20:34:11 localhost logger: ACPI group sony/hotkey / action SPIC is not defined Apr 18 20:34:11 localhost logger: sony/hotkey SPIC 00000001 0000003b Apr 18 20:34:11 localhost logger: ACPI group sony/hotkey / action SPIC is not defined Apr 18 20:34:12 localhost logger: sony/hotkey SPIC 00000001 00000012 Apr 18 20:34:12 localhost logger: ACPI group sony/hotkey / action SPIC is not defined Apr 18 20:34:12 localhost logger: sony/hotkey SPIC 00000001 0000003b Apr 18 20:34:12 localhost logger: ACPI group sony/hotkey / action SPIC is not defined Apr 18 20:34:12 localhost logger: sony/hotkey SPIC 00000001 00000015 Apr 18 20:34:12 localhost logger: ACPI group sony/hotkey / action SPIC is not defined Apr 18 20:34:12 localhost logger: sony/hotkey SPIC 00000001 0000003b Apr 18 20:34:12 localhost logger: ACPI group sony/hotkey / action SPIC is not defined Apr 18 20:34:14 localhost logger: sony/hotkey SPIC 00000001 00000017 Which is that I expected (am I wrong ?) Please notice that I'm not a kernel guru at all so I don't know if it this the right way to do it... Maybe stelian can validate/invalidate this can of patch (tested against 2.6.16.7 vanila). However, I haven't tested yet if this still works after an hibernation. I'll let you know. -- no Fn at all Vaio SZ1XP Dapper https://launchpad.net/bugs/35319 From sitsofe at yahoo.com Tue Apr 18 18:49:49 2006 From: sitsofe at yahoo.com (Sitsofe Wheeler) Date: Tue, 18 Apr 2006 18:49:49 -0000 Subject: [Bug 39800] Re: bcm43xx loses connection after 1 min References: <20060416194508.1627.69286.malonedeb@gangotri.ubuntu.com> Message-ID: <20060418184949.8495.11572.malone@gandwana.ubuntu.com> Does restricting the wifi speed to 11Mbit using sudo iwconfig eth0 rate 11M make the problem go away? ** Summary changed: - bcm43xx looses connection after 1 min + bcm43xx loses connection after 1 min ** Description changed: When set the essid via iwconfig and get an ipadress via dhclient the connection stays stable for about 1 minute. After that time no packages can be sent/received until I set the essid again (and dhclient again). From dmesg: [ 1805.523637] eth2: no IPv6 routers present [ 1888.889357] DEAUTH from AP [ 1888.890480] DEAUTH from AP [ 1888.890490] SoftMAC: Recieved deauthentication packet from 00:0f:66:c8:6d:d7, but that network is unknown. [ 1895.452424] SoftMAC: Open Authentication completed with 00:0f:66:c8:6d:d7 [ 2000.523670] DEAUTH from AP [ 2000.524890] DEAUTH from AP [ 2000.524900] SoftMAC: Recieved deauthentication packet from 00:0f:66:c8:6d:d7, but that network is unknown. [ 2007.092441] SoftMAC: Open Authentication completed with 00:0f:66:c8:6d:d7 - Note: the original reporter indicated the bug was in package 'linux-image-2.6.15-15-powerpc'; however, that package was not published in Ubuntu. + Note: the original reporter indicated the bug was in package 'linux- + image-2.6.15-15-powerpc'; however, that package was not published in + Ubuntu. -- bcm43xx loses connection after 1 min https://launchpad.net/bugs/39800 From sitsofe at yahoo.com Tue Apr 18 19:21:16 2006 From: sitsofe at yahoo.com (Sitsofe Wheeler) Date: Tue, 18 Apr 2006 19:21:16 -0000 Subject: [Bug 39160] Re: swsusp/hibernate started hanging recently References: <20060411162704.32233.18489.malonedeb@gandwana.ubuntu.com> Message-ID: <20060418192116.21557.55624.malone@gangotri.ubuntu.com> If it leads to some messages about the hibernate process anything extra is good. -- swsusp/hibernate started hanging recently https://launchpad.net/bugs/39160 From sergiollanos at hotmail.com Tue Apr 18 19:43:14 2006 From: sergiollanos at hotmail.com (tioantonio) Date: Tue, 18 Apr 2006 19:43:14 -0000 Subject: [Bug 36462] Re: optical mouse problem References: <20060324175400.6279.66012.malonedeb@gandwana.ubuntu.com> Message-ID: <20060418194314.21526.50037.malone@gangotri.ubuntu.com> i have one mouse "soyntec" with this problem , what can i do to give you more info? (i'm a new linux user) -- optical mouse problem https://launchpad.net/bugs/36462 From 84yelo3 at gmail.com Tue Apr 18 20:39:02 2006 From: 84yelo3 at gmail.com (=?utf-8?q?Nicol=C3=B2_Chieffo?=) Date: Tue, 18 Apr 2006 20:39:02 -0000 Subject: [Bug 38625] Re: hibernate not working if on battery References: <20060407171435.24516.51893.malonedeb@gangotri.ubuntu.com> Message-ID: <20060418203902.21526.87100.launchpad@gangotri.ubuntu.com> *** This bug is a duplicate of bug 35213 *** ** This bug has been marked a duplicate of bug 35213 hibernate fails when not on AC power on HP Pavilion ZT3000 - regression from breezy -- hibernate not working if on battery https://launchpad.net/bugs/38625 From 84yelo3 at gmail.com Tue Apr 18 20:36:45 2006 From: 84yelo3 at gmail.com (=?utf-8?q?Nicol=C3=B2_Chieffo?=) Date: Tue, 18 Apr 2006 20:36:45 -0000 Subject: [Bug 35213] Re: hibernate fails when not on AC power on HP Pavilion ZT3000 - regression from breezy References: <20060316170910.6510.54248.malonedeb@gangotri.ubuntu.com> Message-ID: <20060418203645.21557.10057.malone@gangotri.ubuntu.com> ASUSTeK Computer Inc. M6Ne 1.0 even in my case hibernation on battery takes more than 10 minutes but I'm not affected by the problem in the second post ** Bug 38625 has been marked a duplicate of this bug -- hibernate fails when not on AC power on HP Pavilion ZT3000 - regression from breezy https://launchpad.net/bugs/35213 From burner at suppressingfire.org Tue Apr 18 20:58:41 2006 From: burner at suppressingfire.org (Michael R. Head) Date: Tue, 18 Apr 2006 20:58:41 -0000 Subject: [Bug 35213] Re: hibernate fails when not on AC power on HP Pavilion ZT3000 - regression from breezy References: <20060316170910.6510.54248.malonedeb@gangotri.ubuntu.com> Message-ID: <20060418205841.8468.77039.malone@gandwana.ubuntu.com> I should point out that hibernate fails for me on my Thinkpad T30 reliably under these conditions: 1) Power is connectioned 2) Click on gnome power manager notification area icon, select hibernate 3) unplug laptop during hibernation process 4) laptop will hang with harddrive activity and sleep status lights lit until the battery runs out. I seem to be able to hibernate reliably if I'm plugged in and remain plugged in during the process. I seem to be able to hibernate reliably if I'm not plugged in when I tell it to hibernate. I haven't yet tried hibernating while unplugged and plugging into AC during the hibernation process. -- hibernate fails when not on AC power on HP Pavilion ZT3000 - regression from breezy https://launchpad.net/bugs/35213 From Ben.Stanley at exemail.com.au Tue Apr 18 21:06:03 2006 From: Ben.Stanley at exemail.com.au (Ben Stanley) Date: Tue, 18 Apr 2006 21:06:03 -0000 Subject: [Bug 34508] Re: 2.6.15 kernel fails to boot on ppc machine References: <20060311210305.30082.75520.malonedeb@gandwana.ubuntu.com> Message-ID: <20060418210603.21557.18400.malone@gangotri.ubuntu.com> Matt Zimmerman: Re bug #32123, at first I thought I had that bug, but then I looked around in the filesystem available in the BusyBox, and I found a whole bunch of ide drivers, including, I think, the ones that are necessary for my machine. I will have another look in the next few days, and I will try out the DebuggingSystemCrash link and post my results. I agree that my problem may not be this bug. Ben. -- 2.6.15 kernel fails to boot on ppc machine https://launchpad.net/bugs/34508 From hramrach at centrum.cz Tue Apr 18 21:15:21 2006 From: hramrach at centrum.cz (Michal Suchanek) Date: Tue, 18 Apr 2006 21:15:21 -0000 Subject: [Bug 39034] Re: 2.6.15-20 makes eepro 100 ethernet not working References: <20060410193639.32233.93891.malonedeb@gandwana.ubuntu.com> Message-ID: <20060418211521.8468.58179.malone@gandwana.ubuntu.com> doesn't the ethernet adapter appear as eth1? For me it does with 2.6.15-1-686. I suspect some new hotplug/udev scripts might be doing this. It used to work before I upgraded to Dapper. And I thing it was with this kernel. 2.6.15-20.30 does not work for me. ** Attachment added: "/var/log/dmesg" http://librarian.launchpad.net/2163712/dmesg -- 2.6.15-20 makes eepro 100 ethernet not working https://launchpad.net/bugs/39034 From ubuntu-bugs at nullinfinity.org Tue Apr 18 21:34:46 2006 From: ubuntu-bugs at nullinfinity.org (Johan Brannlund) Date: Tue, 18 Apr 2006 21:34:46 -0000 Subject: [Bug 34039] Re: bcm43xx module is highly unstable References: <20060308023058.26210.62368.malonedeb@gangotri.ubuntu.com> Message-ID: <20060418213446.21526.136.malone@gangotri.ubuntu.com> Alright, I gave this some more tries. For some reason it seems like the SysRq combinations are not very reliable on my machine - I have to try a couple of times to actually get them to trigger. Anyway, once I did "ifdown eth1" and the system froze, I could not get them to work at all. Seems like a *very* hard lockup. -- bcm43xx module is highly unstable https://launchpad.net/bugs/34039 From zcerza at coe.neu.edu Tue Apr 18 22:05:53 2006 From: zcerza at coe.neu.edu (Zack Cerza) Date: Tue, 18 Apr 2006 22:05:53 -0000 Subject: [Bug 40071] linux-image-* will happily install even it /boot fills up in the process References: <20060418220553.8468.65002.malonedeb@gandwana.ubuntu.com> Message-ID: <20060418220553.8468.65002.malonedeb@gandwana.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Major Priority: (none set) Status: Unconfirmed Description: linux-image-* will happily install even it /boot fills up in the process, rendering that kernel unbootable. # df -h | grep boot /dev/sda1 89M 89M 0 100% /boot # ls /boot/initrd* | tail -n3 -rw-r--r-- 1 root root 6718941 2006-03-23 20:30 initrd.img-2.6.15-18-686 -rw-r--r-- 1 root root 6717570 2006-04-03 15:43 initrd.img-2.6.15-19-686 -rw-r--r-- 1 root root 3588096 2006-04-06 00:24 initrd.img-2.6.15-20-686 It looks like the last initrd is incomplete, doesn't it? ** Summary changed: - linux-image-* will happily install even it /boot fills up in the process + linux-image-* will happily install even if /boot fills up in the process ** Changed in: linux-source-2.6.15 (Ubuntu) Severity: Normal => Major -- linux-image-* will happily install even if /boot fills up in the process https://launchpad.net/bugs/40071 From sitsofe at yahoo.com Tue Apr 18 22:33:04 2006 From: sitsofe at yahoo.com (Sitsofe Wheeler) Date: Tue, 18 Apr 2006 22:33:04 -0000 Subject: [Bug 38263] Re: freeze at startup References: <20060405194706.24486.46138.malonedeb@gangotri.ubuntu.com> Message-ID: <20060418223304.21557.271.malone@gangotri.ubuntu.com> does booting with the extra kernel parameter acpi=off help? -- freeze at startup https://launchpad.net/bugs/38263 From zcerza at coe.neu.edu Tue Apr 18 22:44:47 2006 From: zcerza at coe.neu.edu (Zack Cerza) Date: Tue, 18 Apr 2006 22:44:47 -0000 Subject: [Bug 29767] Re: IBM Thinkpad X41 suspend to disk unsatisfactory regression References: <20060126124346.26274.53643.malonedeb@gangotri.ubuntu.com> Message-ID: <20060418224447.8468.83108.malone@gandwana.ubuntu.com> I just now saw the same behavior noted in the first comment to this bug. 2.6.15-19-686. -- IBM Thinkpad X41 suspend to disk unsatisfactory regression https://launchpad.net/bugs/29767 From uk6q6zh02 at sneakemail.com Tue Apr 18 23:47:43 2006 From: uk6q6zh02 at sneakemail.com (Fat and Bold) Date: Tue, 18 Apr 2006 23:47:43 -0000 Subject: [Bug 34209] Re: 2.6.15-17-k7 doesn't boot on Athlon 2000+ References: <20060309134308.29403.37559.malonedeb@gangotri.ubuntu.com> Message-ID: <20060418234743.21557.42596.malone@gangotri.ubuntu.com> Me too. Breezy's 2.6.12-9-386 works fine on my Athlon 3400+. Neither 2.6.15-20-k7 nor 2.6.15-20-386 will boot successfully. When I boot, the screen is immediately corrupted (changes to strange video mode) and the computer freezes. If I remove "splash" then the screen doesn't corrupt, but the process hangs at "Begin: Waiting for root file system...". It appears that it's not loading any modules at all. My root file system is on a RAID1. -- 2.6.15-17-k7 doesn't boot on Athlon 2000+ https://launchpad.net/bugs/34209 From alireza.ali at gmail.com Wed Apr 19 02:38:44 2006 From: alireza.ali at gmail.com (Alireza Ali) Date: Wed, 19 Apr 2006 02:38:44 -0000 Subject: [Bug 21344] Re: Hang when loading ipw2100 References: <20060113141220.21012.9495.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060419023844.8468.9407.malone@gandwana.ubuntu.com> Tried Flight 6 CDs and same thing happened. It is related to ACPI stuff. Maybe this helps too: After restarting the system not only I am unable to boot to Ubuntu and Windows XP is unable to load too. Somewhere in the loading process it freezes. I have to turn off the system and turn it on to solve the problem. -- Hang when loading ipw2100 https://launchpad.net/bugs/21344 From burner at suppressingfire.org Wed Apr 19 03:11:31 2006 From: burner at suppressingfire.org (Michael R. Head) Date: Wed, 19 Apr 2006 03:11:31 -0000 Subject: [Bug 35213] Re: hibernate fails when not on AC power on HP Pavilion ZT3000 - regression from breezy References: <20060316170910.6510.54248.malonedeb@gangotri.ubuntu.com> Message-ID: <20060419031131.21526.30008.malone@gangotri.ubuntu.com> Actually, hibernation without AC at all is not 100% reliable. It often works, but occaisionally fails. -- hibernate fails when not on AC power on HP Pavilion ZT3000 - regression from breezy https://launchpad.net/bugs/35213 From tom.ubuntu at thoughtcrime.org.nz Wed Apr 19 03:15:50 2006 From: tom.ubuntu at thoughtcrime.org.nz (cartel) Date: Wed, 19 Apr 2006 03:15:50 -0000 Subject: [Bug 40088] [PATCH] Support i386 Xen subarch References: <20060419031550.8495.59387.malonedeb@gandwana.ubuntu.com> Message-ID: <20060419031550.8495.59387.malonedeb@gandwana.ubuntu.com> Public bug reported: Affects: kernel-package (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: Xen 3.0.2 drops Xen as an architecture, implementing as a subarch of i386 instead. kernel-package needs to be updated to support this. Manoj Srivasta made changes to upstream, but they could not easily be ported into the Ubuntu version at this time. Therefore, I have backported Manoj's changes to the Ubuntu version. ** Attachment added: "Support i386 Xen Subarch" http://librarian.launchpad.net/2174783/support_i386_xen_subarch.patch -- [PATCH] Support i386 Xen subarch https://launchpad.net/bugs/40088 From pkropf at gmail.com Wed Apr 19 03:45:59 2006 From: pkropf at gmail.com (Peter Kropf) Date: Wed, 19 Apr 2006 03:45:59 -0000 Subject: [Bug 40090] Unable to handle kernel NULL pointer dereference at virtual address 00000094 References: <20060419034559.8468.92517.malonedeb@gandwana.ubuntu.com> Message-ID: <20060419034559.8468.92517.malonedeb@gandwana.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 linux-image-2.6.15-20-686 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: This error occurs when trying to sync a Palm T/X with the Gnome Pilot applet. This occurs on a Thinkpad T41p running Ubuntu 6.06. Here's the details from /var/log/messages: Apr 18 20:37:13 localhost kernel: [4322377.819000] <1>Unable to handle kernel NULL pointer dereference at virtual address 00000094 Apr 18 20:37:13 localhost kernel: [4322381.906000] f910d9f2 Apr 18 20:37:13 localhost kernel: [4322381.906000] PREEMPT SMP Apr 18 20:37:13 localhost kernel: [4322381.906000] Modules linked in: visor usbserial arc4 ieee80211_crypt_wep vmnet vmmon binfmt_misc rfcomm l2cap bluetooth ipv6 nvram uinput radeon drm autofs4 speedstep_centrino cpufreq_powersave cpufreq_stats cpufreq_userspace cpufreq_ondemand cpufreq_conservative freq_table tc1100_wmi video acpi_sbs battery ibm_acpi i2c_acpi_ec i2c_core container button pcc_acpi sony_acpi ac dev_acpi hotkey nls_cp437 ntfs dm_mod md_mod lp af_packet usbhid tsdev irtty_sir joydev sir_dev parport_pc parport nsc_ircc irda psmouse serio_raw pcmcia crc_ccitt pcspkr rtc e1000 ipw2100 ieee80211 ieee80211_crypt snd_intel8x0 snd_ac97_codec snd_ac97_bus snd_pcm_oss snd_mixer_oss snd_pcm snd_timer snd soundcore snd_page_alloc yenta_socket rsrc_nonstatic pcmcia_core intel_agp agpgart shpchp pci_hotplug hw_random evdev reiserfs ide_generic ehci_hcd uhci_hcd usbcore ide_cd cdrom ide_disk piix generic thermal processor fan capability commoncap vga16fb vgastate fbcon tileblit font bitblit softcursor Apr 18 20:37:13 localhost kernel: [4322381.906000] CPU: 0 Apr 18 20:37:13 localhost kernel: [4322381.906000] EIP: 0060:[pg0+952859122/1069188096] Tainted: P VLI Apr 18 20:37:13 localhost kernel: [4322381.906000] EFLAGS: 00210246 (2.6.15-20-686) Apr 18 20:37:13 localhost kernel: [4322381.906000] EIP is at serial_ioctl+0x32/0x100 [usbserial] Apr 18 20:37:13 localhost kernel: [4322381.906000] eax: 00000000 ebx: 00000000 ecx: e7ea1ec0 edx: bfff3988 Apr 18 20:37:13 localhost kernel: [4322381.906000] esi: 00005401 edi: bfff3988 ebp: e7ea1ec0 esp: f461fef8 Apr 18 20:37:13 localhost kernel: [4322381.906000] ds: 007b es: 007b ss: 0068 Apr 18 20:37:13 localhost kernel: [4322381.906000] Process gpilotd (pid: 23113, threadinfo=f461e000 task=dffeaa90) Apr 18 20:37:13 localhost kernel: [4322381.906000] Stack: c016f309 e7ea1f0c f4be7cf0 e7ea1ec0 f461ff44 e7ea1ec0 fffffff8 cc3d1000 Apr 18 20:37:13 localhost kernel: [4322381.906000] 00005401 c023f74b cc3d1000 e7ea1ec0 00005401 bfff3988 bfff3988 e7ea1ec0 Apr 18 20:37:13 localhost kernel: [4322381.906000] cc3d1000 e7ea1ec0 bfff3988 00005401 00000024 c01857b3 f4be7c38 e7ea1ec0 Apr 18 20:37:13 localhost kernel: [4322381.906000] Call Trace: Apr 18 20:37:13 localhost kernel: [4322381.906000] [__dentry_open+265/640] __dentry_open+0x109/0x280 Apr 18 20:37:13 localhost kernel: [4322381.906000] [tty_ioctl+171/1456] tty_ioctl+0xab/0x5b0 Apr 18 20:37:13 localhost kernel: [4322381.906000] [do_ioctl+147/160] do_ioctl+0x93/0xa0 Apr 18 20:37:13 localhost kernel: [4322381.906000] [vfs_ioctl+107/560] vfs_ioctl+0x6b/0x230 Apr 18 20:37:13 localhost kernel: [4322381.906000] [fd_install+50/112] fd_install+0x32/0x70 Apr 18 20:37:13 localhost kernel: [4322381.906000] [sys_ioctl+136/160] sys_ioctl+0x88/0xa0 Apr 18 20:37:13 localhost kernel: [4322381.906000] [sysenter_past_esp+84/117] sysenter_past_esp+0x54/0x75 Apr 18 20:37:13 localhost kernel: [4322381.906000] Code: 89 74 24 18 8b 74 24 30 89 7c 24 1c 8b 7c 24 34 89 6c 24 20 8b 6c 24 2c 89 5c 24 14 8b 98 94 09 00 00 a1 64 4d 11 f9 85 c0 75 6e <8b> 8b 94 00 00 00 85 c9 75 27 8b 15 64 4d 11 f9 b8 ed ff ff ff -- Unable to handle kernel NULL pointer dereference at virtual address 00000094 https://launchpad.net/bugs/40090 From skauchali at gmail.com Wed Apr 19 05:28:23 2006 From: skauchali at gmail.com (shuttleworthwannabe) Date: Wed, 19 Apr 2006 05:28:23 -0000 Subject: [Bug 39138] Re: PCI resource errors and unable to reboot system References: <20060411132552.24486.98960.malonedeb@gangotri.ubuntu.com> Message-ID: <20060419052823.21526.25513.launchpad@gangotri.ubuntu.com> ** Attachment added: "Breezy dmseg" http://librarian.launchpad.net/2174819/dmesg_breezy -- PCI resource errors and unable to reboot system https://launchpad.net/bugs/39138 From Nikolaus at rath.org Wed Apr 19 06:54:55 2006 From: Nikolaus at rath.org (Nikolaus Rath) Date: Wed, 19 Apr 2006 06:54:55 -0000 Subject: [Bug 35213] Hibernation on Battery also fails with Dell Latitude D810 References: <20060316170910.6510.54248.malonedeb@gangotri.ubuntu.com> Message-ID: <20060419065455.21526.50361.malone@gangotri.ubuntu.com> I have the same problem with a Dell Latitude D810. With AC power, hibernation works. Without AC power, the system freezes. Turning off laptop mode and waiting for 5 minutes doesn't help. This is also reported as Bug #40034 on acpi-support. -- hibernate fails when not on AC power on HP Pavilion ZT3000 - regression from breezy https://launchpad.net/bugs/35213 From philbull at gmail.com Wed Apr 19 07:01:44 2006 From: philbull at gmail.com (Phil Bull) Date: Wed, 19 Apr 2006 07:01:44 -0000 Subject: [Bug 39811] Re: Linksys wireless-B WPC11 V.4 wireless card is detected correctly as realtek 8180 chipset but is not recognized by the system References: <20060416211603.16492.64208.malonedeb@gandwana.ubuntu.com> Message-ID: <20060419070144.21526.97876.malone@gangotri.ubuntu.com> *** This bug is a duplicate of bug 33714 *** Thanks for the info. I think this is part of the same issue as bug 33714. If this is an ndiswrapper configuration issue, take a look here: http://ndiswrapper.sourceforge.net/mediawiki/index.php/Ubuntu Thanks again ** This bug has been marked a duplicate of bug 33714 r818x not working -- Linksys wireless-B WPC11 V.4 wireless card is detected correctly as realtek 8180 chipset but is not recognized by the system https://launchpad.net/bugs/39811 From philbull at gmail.com Wed Apr 19 07:01:58 2006 From: philbull at gmail.com (Phil Bull) Date: Wed, 19 Apr 2006 07:01:58 -0000 Subject: [Bug 33714] Re: r818x not working References: <20060304162930.17525.6725.malonedeb@gangotri.ubuntu.com> Message-ID: <20060419070158.8468.1714.launchpad@gandwana.ubuntu.com> ** Bug 39811 has been marked a duplicate of this bug -- r818x not working https://launchpad.net/bugs/33714 From sitsofe at yahoo.com Wed Apr 19 07:11:25 2006 From: sitsofe at yahoo.com (Sitsofe Wheeler) Date: Wed, 19 Apr 2006 07:11:25 -0000 Subject: [Bug 39958] Re: Trying to access unmounted SMBFS share in Rhythmbox causes entire system crash References: <20060418054930.1684.32955.malonedeb@gangotri.ubuntu.com> Message-ID: <20060419071125.8468.87780.malone@gandwana.ubuntu.com> Mark: Could you also attach the output of dmesg in the same manner as you did for lspci? -- Trying to access unmounted SMBFS share in Rhythmbox causes entire system crash https://launchpad.net/bugs/39958 From m.lutzer at gmx.de Wed Apr 19 07:31:18 2006 From: m.lutzer at gmx.de (Lutz) Date: Wed, 19 Apr 2006 07:31:18 -0000 Subject: [Bug 40109] sleep failed when network traffic References: <20060419073118.21557.35356.malonedeb@gangotri.ubuntu.com> Message-ID: <20060419073118.21557.35356.malonedeb@gangotri.ubuntu.com> Public bug reported: Affects: linux-source-2.6.12 linux-image-2.6.12-10-686 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: I use a MSI Megabook S260 with Ubuntu Breezy installed on. Sleep mode works fine, usually. When I use a filesharing application which cause much traffic (on the ethernet device) or downloading a big file the laptop is not going to sleep properly. Instead of sleep only the screen is locked. After unlocking I recognize that the network and usb is not working anymore. Also to remove/unload the 8139too module does not work, it hangs. Additionally to shutdown the system does not work properly: I have to kill the X system (ctrl + alt + <-) than the system shuts down. All this works fine when I don't try to set the system to sleep while having much network traffic. I experienced such behaviour several times. Potentally bugs #38305 and #24336 are relevant? ** Attachment added: "dmesg" http://librarian.launchpad.net/2174860/dmesg ** Attachment added: "lspci -vv" http://librarian.launchpad.net/2174861/lspci-vv ** Attachment added: "lspci -vvn" http://librarian.launchpad.net/2174862/lspci-vvn -- sleep failed when network traffic https://launchpad.net/bugs/40109 From rajesh.deo at gmail.com Wed Apr 19 08:26:12 2006 From: rajesh.deo at gmail.com (rajesh) Date: Wed, 19 Apr 2006 08:26:12 -0000 Subject: [Bug 34998] Re: Wireless card doesn't work (airo module) References: <20060315065622.30057.57904.malonedeb@gandwana.ubuntu.com> Message-ID: <20060419082612.8495.98729.malone@gandwana.ubuntu.com> I have a aironet minipci 350 (seen in lspci as Unknown 5000) which is also not working with Dapper kernel 2.6.15-20-686 and wpa_supplicant. I noticed that following patch exists, and am wondering if this has been added. and whether this is the cause of recent problems with airo module, WEP encryption and wpa_supplicant. Patch: http://mail.gnome.org/archives/networkmanager-list/2006-January/msg00204.html Any information will be appreciated. -- Wireless card doesn't work (airo module) https://launchpad.net/bugs/34998 From studiolazzarini at email.it Wed Apr 19 08:33:29 2006 From: studiolazzarini at email.it (giorsat) Date: Wed, 19 Apr 2006 08:33:29 -0000 Subject: [Bug 40115] sis usb controller hungs system during boot time References: <20060419083329.8468.27970.malonedeb@gandwana.ubuntu.com> Message-ID: <20060419083329.8468.27970.malonedeb@gandwana.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: hi. I've being trying to use ubuntu on a sis motherboard computer for years but even the latest flight6 pre release hungs during boot time for a problem with sis 7001 openhost controller usb. During boot time I get a lot of garbage regarding irq3 and 11 and my usb keyb and mouse don't work. with acpi= off keyb starts working but not mouse. I tried to use a ps2 mouse but still no result. noapic nolapic don't' make any differenze. the phoenixbios 4.0rc6.0 ver 3.03c has so few options that I tried almost everything. I don't' know what to do. I stick with a debian with kernel 2.4 and no problem at all.... -- sis usb controller hungs system during boot time https://launchpad.net/bugs/40115 From fabio.pedretti at ing.unibs.it Wed Apr 19 09:11:43 2006 From: fabio.pedretti at ing.unibs.it (Fabio Pedretti) Date: Wed, 19 Apr 2006 09:11:43 -0000 Subject: [Bug 40119] SPARC boot failed: Illegal Instruction References: <20060419084429.8468.45532.malonedeb@gandwana.ubuntu.com> Message-ID: <20060419091143.8495.79344.launchpad@canonical@gandwana.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Assignee: Fabio Massimo Di Nitto Status: Needs Info Description: I have downloaded the CD image dated 17 april from here: http://ports.ubuntu.com/ubuntu-ports/dists/dapper/main/installer-sparc/current/images/combined/2.6/mini.iso I am using a SunFire v240. Booting from the CD image I get this error: boot: expert Allocated 8 Megs of memory at 0x40000000 for kernel Uncompressing image... Loaded kernel version 2.6.15 Loading initial ramdisk (4017271 bytes at 0x3F802000 phys, 0x40C00000 virt)... Illegal Instruction ok -- SPARC boot failed: Illegal Instruction https://launchpad.net/bugs/40119 From cjwatson at canonical.com Wed Apr 19 09:07:05 2006 From: cjwatson at canonical.com (Colin Watson) Date: Wed, 19 Apr 2006 09:07:05 -0000 Subject: [Bug 40119] Re: SPARC boot failed: Illegal Instruction References: <20060419084429.8468.45532.malonedeb@gandwana.ubuntu.com> Message-ID: <20060419090705.21557.23713.launchpad@gangotri.ubuntu.com> ** Changed in: base-installer (Ubuntu) Sourcepackagename: base-installer => None Binarypackagename: base-installer => None -- SPARC boot failed: Illegal Instruction https://launchpad.net/bugs/40119 From fabbione at ubuntu.com Wed Apr 19 09:11:42 2006 From: fabbione at ubuntu.com (Fabio Massimo Di Nitto) Date: Wed, 19 Apr 2006 09:11:42 -0000 Subject: [Bug 40119] Re: SPARC boot failed: Illegal Instruction References: <20060419084429.8468.45532.malonedeb@gandwana.ubuntu.com> Message-ID: <20060419091143.8495.61815.malone@gandwana.ubuntu.com> There is a general problem that sometimes requires a complete powerdown of the machine. Can you be so kind to do the following: - powerdown - boot cdrom if the problem still persist - powerdown - boot from the network. We do have SunFire v240 at the datacenter and they are running just fine. If none of the above helps, please try to provide the output of prtconf -p -v from solaris. Fabio ** Changed in: Ubuntu Sourcepackagename: None => linux-source-2.6.15 Assignee: (unassigned) => Fabio Massimo Di Nitto Status: Unconfirmed => Needs Info -- SPARC boot failed: Illegal Instruction https://launchpad.net/bugs/40119 From apeeters at lashout.net Wed Apr 19 09:23:54 2006 From: apeeters at lashout.net (Adriaan Peeters) Date: Wed, 19 Apr 2006 09:23:54 -0000 Subject: [Bug 25975] Re: DMA timeouts on UDMA harddisks References: <20060113144716.21012.1390.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060419092354.21526.54164.malone@gangotri.ubuntu.com> These hdparm settings seem to decrease the occurence of the timeouts, but they still occur on large data transfers. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Rejected => Confirmed -- DMA timeouts on UDMA harddisks https://launchpad.net/bugs/25975 From lool+launchpad at via.ecp.fr Wed Apr 19 11:14:00 2006 From: lool+launchpad at via.ecp.fr (=?utf-8?q?Lo=C3=AFc_Minier?=) Date: Wed, 19 Apr 2006 11:14:00 -0000 Subject: [Bug 40119] Re: SPARC boot failed: Illegal Instruction References: <20060419084429.8468.45532.malonedeb@gandwana.ubuntu.com> Message-ID: <20060419111401.8468.41538.launchpad@gandwana.ubuntu.com> ** Changed in: base-installer (Ubuntu) Sourcepackagename: base-installer => None -- SPARC boot failed: Illegal Instruction https://launchpad.net/bugs/40119 From mdz at ubuntu.com Wed Apr 19 11:17:04 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Wed, 19 Apr 2006 11:17:04 -0000 Subject: [Bug 40119] Re: SPARC boot failed: Illegal Instruction References: <20060419084429.8468.45532.malonedeb@gandwana.ubuntu.com> Message-ID: <20060419111704.21557.93816.launchpad@gangotri.ubuntu.com> ** Changed in: Ubuntu Status: Unconfirmed => Rejected -- SPARC boot failed: Illegal Instruction https://launchpad.net/bugs/40119 From cniehaus at kde.org Wed Apr 19 11:43:33 2006 From: cniehaus at kde.org (carsten) Date: Wed, 19 Apr 2006 11:43:33 -0000 Subject: [Bug 38476] ACPI not working -- Laptop doesn't boot without acpi=off References: <20060406191845.32233.10935.malonedeb@gandwana.ubuntu.com> Message-ID: <20060419114333.21557.14894.launchpad@canonical@gangotri.ubuntu.com> Public bug reported: Affects: linux (upstream) Severity: Unknown Priority: Unknown Status: Unconfirmed Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Needs Info Description: On my Toshiba Satellite a100-533 the kernel doesn't work without using acpi=off. I will attach a kernel-oops-foto I took by using Knoppix 5.0. I guess it is the same bug (aka unsupported device), but in Kubuntu (I was using the flight5 and flight6 live-cd) I don't get the oops-debug- output, it just crashes. I will also attach lspci -vvv What other kind of information do you need? -- ACPI not working -- Laptop doesn't boot without acpi=off https://launchpad.net/bugs/38476 From mjg59 at codon.org.uk Wed Apr 19 11:43:33 2006 From: mjg59 at codon.org.uk (Matthew Garrett) Date: Wed, 19 Apr 2006 11:43:33 -0000 Subject: [Bug 38476] Re: ACPI not working -- Laptop doesn't boot without acpi=off References: <20060406191845.32233.10935.malonedeb@gandwana.ubuntu.com> Message-ID: <20060419114333.21557.32125.malone@gangotri.ubuntu.com> Looks like either ata_host_add or request_irq is failing in ata_device_add in drivers/scsi/libata-core.c - I'd go for request_irq, given that it works without acpi. Does booting with pci=noacpi as the only extra boot option help? ** Changed in: kernel-image-2.6.15-18-386-di kernel-build-2.4.27-2 (Ubuntu) Sourcepackagename: kernel-image-2.6.15-18-386-di => linux-source-2.6.15 Binarypackagename: kernel-build-2.4.27-2 => None -- ACPI not working -- Laptop doesn't boot without acpi=off https://launchpad.net/bugs/38476 From cniehaus at kde.org Wed Apr 19 12:17:35 2006 From: cniehaus at kde.org (carsten) Date: Wed, 19 Apr 2006 12:17:35 -0000 Subject: [Bug 38476] Re: ACPI not working -- Laptop doesn't boot without acpi=off References: <20060406191845.32233.10935.malonedeb@gandwana.ubuntu.com> Message-ID: <20060419121735.8468.88940.malone@gandwana.ubuntu.com> I cannot test right now but would like to ask before testing: "only" means live pci=noacpi or also those root=... usplash rw -- and so on parameters? The default is a quite long promt so I would really like to know what exactly to enter as promt... I hope I can test tomorrow or next monday. -- ACPI not working -- Laptop doesn't boot without acpi=off https://launchpad.net/bugs/38476 From mjg59 at codon.org.uk Wed Apr 19 12:37:23 2006 From: mjg59 at codon.org.uk (Matthew Garrett) Date: Wed, 19 Apr 2006 12:37:23 -0000 Subject: [Bug 38476] Re: ACPI not working -- Laptop doesn't boot without acpi=off References: <20060406191845.32233.10935.malonedeb@gandwana.ubuntu.com> Message-ID: <20060419123723.21557.74730.malone@gangotri.ubuntu.com> Sorry, with all the normal boot options and also pci=noacpi, but not acpi=off noapic nolapic -- ACPI not working -- Laptop doesn't boot without acpi=off https://launchpad.net/bugs/38476 From fabio.pedretti at ing.unibs.it Wed Apr 19 12:52:12 2006 From: fabio.pedretti at ing.unibs.it (Fabio Pedretti) Date: Wed, 19 Apr 2006 12:52:12 -0000 Subject: [Bug 40119] Re: SPARC boot failed: Illegal Instruction References: <20060419084429.8468.45532.malonedeb@gandwana.ubuntu.com> Message-ID: <20060419125212.8495.93041.malone@gandwana.ubuntu.com> I have done a powerdown and rebooted from cdrom but I always get the same error. I can't try to boot from the network at the moment. I attach the output of prtconf -p -v System Configuration: Sun Microsystems sun4u Memory size: 1024 Megabytes System Peripherals (PROM Nodes): Node 0xf00296ec boot-retained-page: banner-name: 'Sun Fire V240' model: 'SUNW,375-3149' idprom: 01830003.ba71845d.00000000.71845d3b.f1010a00.00000000.00000000.000000fa scsi-initiator-id: 00000007 stick-frequency: 00b71b00 clock-frequency: 09f437c0 breakpoint-trap: 0000007f #size-cells: 00000002 name: 'SUNW,Sun-Fire-V240' device_type: 'jbus' Node 0xf002c880 name: 'packages' Node 0xf00490f4 name: 'SUNW,builtin-drivers' Node 0xf00558e0 disk-write-fix: name: 'deblocker' Node 0xf0055dc4 name: 'disk-label' Node 0xf0056718 iso6429-1983-colors: name: 'terminal-emulator' Node 0xf005e2d4 source: '/flashprom at 2,0:' name: 'dropins' Node 0xf0085ac4 name: 'kbd-translator' Node 0xf00868b4 name: 'obp-tftp' Node 0xf008bcf0 name: 'SUNW,i2c-ram-device' Node 0xf008c560 name: 'SUNW,fru-device' Node 0xf008cd68 maximum-reason-length: 000000fa name: 'SUNW,asr' Node 0xf00cd5c0 support: name: 'ufs-file-system' Node 0xf002c8f8 bootargs: 00 bootpath: '/pci at 1c,600000/scsi at 2/disk at 0,0:a' mmu: fff73328 memory: fff73538 stdout: fedcd778 stdin: fedcdc30 stdout-#lines: ffffffff name: 'chosen' Node 0xf002c96c version: 'OBP 4.11.4 2003/07/23 08:04' model: 'SUNW,4.11.4' aligned-allocator: relative-addressing: name: 'openprom' Node 0xf002c9fc name: 'client-services' Node 0xf002cab4 test-args: diag-passes: '1' asr-policy: 'normal' local-mac-address?: 'true' fcode-debug?: 'false' silent-mode?: 'false' scsi-initiator-id: '7' oem-logo: oem-logo?: 'false' oem-banner: oem-banner?: 'false' ansi-terminal?: 'true' screen-#columns: '80' screen-#rows: '34' ttyb-rts-dtr-off: 'false' ttyb-ignore-cd: 'true' ttya-rts-dtr-off: 'false' ttya-ignore-cd: 'true' ttyb-mode: '9600,8,n,1,-' ttya-mode: '9600,8,n,1,-' output-device: 'ttya' input-device: 'ttya' auto-boot-on-error?: 'false' load-base: '16384' auto-boot?: 'true' boot-command: 'boot' diag-file: diag-device: 'disk0:a' boot-file: boot-device: 'disk0:a' use-nvramrc?: 'false' nvramrc: security-mode: 'none' security-password: security-#badlogins: '0' post-trigger: 'power-on-reset ' diag-script: 'none' diag-level: 'min' diag-switch?: 'false' obdiag-trigger: 'power-on-reset ' error-reset-recovery: 'boot' name: 'options' Node 0xf002cb2c xnet2: '/pci at 1d,700000/pci at 1/SUNW,hme at 0,1:dhcp,' xnet1: '/pci at 1e,600000/pci at 3/SUNW,hme at 0,1:dhcp,' xnet: '/pci at 1e,600000/pci at 2/SUNW,hme at 0,1:dhcp,' net3: '/pci at 1d,700000/network at 2,1' net2: '/pci at 1d,700000/network at 2' net1: '/pci at 1f,700000/network at 2,1' net: '/pci at 1f,700000/network at 2' cdrom: '/pci at 1e,600000/ide at d/cdrom at 0,0:f' ide: '/pci at 1e,600000/ide at d' disk3: '/pci at 1c,600000/scsi at 2/disk at 3,0' disk2: '/pci at 1c,600000/scsi at 2/disk at 2,0' disk1: '/pci at 1c,600000/scsi at 2/disk at 1,0' disk0: '/pci at 1c,600000/scsi at 2/disk at 0,0' disk: '/pci at 1c,600000/scsi at 2/disk at 0,0' scsi: '/pci at 1c,600000/scsi at 2' sc-control: '/pci at 1e,600000/isa at 7/rmc-comm at 0,3e8' ttyb: '/pci at 1e,600000/isa at 7/serial at 0,2e8' ttya: '/pci at 1e,600000/isa at 7/serial at 0,3f8' name: 'aliases' Node 0xf003e278 reg: 00000000.00000000.00000000.40000000 available: 00000000.3fec2000.00000000.0001a000.00000000.3f002000.00000000.0017a000.00000000.3e002000.00000000.00934000.00000000.00000000.00000000.3c4e4000 name: 'memory' Node 0xf003e884 translations: 00000310.0058e000.00000000.00b9c000.80000000.3c4e4036.00000310.00548000.00000000.00046000.80000000.3fe6e036.00000310.00280000.00000000.002c8000.80000000.3e936036.00000310.00000000.00000000.00280000.80000000.3f180036.0000030f.ffffe000.00000000.00002000.80000000.3fe34036.0000030f.ffffc000.00000000.00002000.80000000.3fe12036.0000030f.ffffa000.00000000.00002000.80000000.3fe04036.0000030f.ffff8000.00000000.00002000.80000000.3fde6036.0000030f.ffff6000.00000000.00002000.80000000.3fd3e036.0000030f.ffff4000.00000000.00002000.80000000.3fc2e036.00000300.002ca000.00000000.00002000.80000000.3f17e036.00000300.002c8000.00000000.00002000.80000000.3fc00036.00000300.002c0000.00000000.00008000.80000000.3fc02036.00000300.002bc000.00000000.00004000.80000000.3fc0a036.00000300.002b6000.00000000.00006000.80000000.3fc0e036.00000300.002a8000.00000000.0000e000.80000000.3fc16036.00000300.002a6000.00000000.00002000.80000000.3fc24036.00000300.0029e000.00000000.00008000.80000000.3fc26036.00000300.0029c000.00000000.00002000.80000000.3fc30036.00000300.00296000.00000000.00006000.80000000.3fc32036.00000300.00294000.00000000.00002000.80000000.3fc38036.00000300.0028c000.00000000.00008000.80000000.3fc3c036.00000300.0028a000.00000000.00002000.80000000.3fc44036.00000300.00282000.00000000.00008000.80000000.3fc46036.00000300.0027c000.00000000.00006000.80000000.3fc56036.00000300.0026c000.00000000.00010000.80000000.3fc5c036.00000300.00266000.00000000.00006000.80000000.3fc70036.00000300.00262000.00000000.00004000.80000000.3fc76036.00000300.00256000.00000000.0000c000.80000000.3fc7a036.00000300.0024a000.00000000.0000c000.80000000.3fc86036.00000300.00206000.00000000.00044000.80000000.3fc94036.00000300.00200000.00000000.00006000.80000000.3fcda036.00000300.001f4000.00000000.0000c000.80000000.3fce0036.00000300.001ec000.00000000.00008000.80000000.3fcf0036.00000300.001d2000.00000000.0001a000.80000000.3fcf8036.00000300.001be000.00000000.00014000.80000000.3fd12036.00000300.001bc000.00000000.00002000.80000000.3fd32036.00000300.001b2000.00000000.00006000.80000000.3fd34036.00000300.00178000.00000000.00004000.80000000.3fd40036.00000300.00174000.00000000.00004000.80000000.3fd3a036.00000300.00168000.00000000.0000c000.80000000.3fd26036.00000300.00164000.00000000.00004000.80000000.3fcec036.00000300.00162000.00000000.00002000.80000000.3fcd8036.00000300.00160000.00000000.00002000.80000000.3fc92036.00000300.0015c000.00000000.00004000.80000000.3fc6c036.00000300.00154000.00000000.00008000.80000000.3fc4e036.00000300.00152000.00000000.00002000.80000000.3fc3a036.00000300.00150000.00000000.00002000.80000000.3fc14036.00000300.0014e000.00000000.00002000.80000000.3f17c036.00000300.00138000.00000000.00004000.80000000.3fd44036.00000300.000fa000.00000000.00002000.80000000.3fd48036.00000300.000f2000.00000000.00008000.80000000.3fd4e036.00000300.000f0000.00000000.00002000.80000000.3fd5a036.00000300.000ee000.00000000.00002000.80000000.3fd68036.00000300.000e8000.00000000.00006000.80000000.3fd76036.00000300.000e6000.00000000.00002000.80000000.3fd7e036.00000300.000e4000.00000000.00002000.80000000.3fd82036.00000300.000e0000.00000000.00004000.80000000.3fd8c036.00000300.000b2000.00000000.0002e000.80000000.3fd90036.00000300.000b0000.00000000.00002000.80000000.3fdbe036.00000300.0008e000.00000000.00022000.80000000.3fdc0036.00000300.0008c000.00000000.00002000.80000000.3fde4036.00000300.0008a000.00000000.00002000.80000000.3fe00036.00000300.00088000.00000000.00002000.80000000.3fe02036.00000300.00074000.00000000.00014000.80000000.3fdec036.00000300.00072000.00000000.00002000.80000000.3fde2036.00000300.0006a000.00000000.00008000.80000000.3fd84036.00000300.00068000.00000000.00002000.80000000.3fd80036.00000300.00066000.00000000.00002000.80000000.3fd7c036.00000300.0005a000.00000000.0000c000.80000000.3fd6a036.00000300.0004e000.00000000.0000c000.80000000.3fd5c036.00000300.0004a000.00000000.00004000.80000000.3fd56036.00000300.00048000.00000000.00002000.80000000.3fd4a036.00000300.00046000.00000000.00002000.80000000.3fe06036.00000300.00044000.00000000.00002000.80000000.3fe08036.00000300.0003c000.00000000.00008000.80000000.3fe0a036.00000300.00034000.00000000.00008000.80000000.3fe14036.00000300.00032000.00000000.00002000.80000000.3fe1c036.00000300.00030000.00000000.00002000.80000000.3fe1e036.00000300.0002e000.00000000.00002000.80000000.3fe20036.00000300.0002c000.00000000.00002000.80000000.3fe22036.00000300.0002a000.00000000.00002000.80000000.3fe24036.00000300.00028000.00000000.00002000.80000000.3fe26036.00000300.00026000.00000000.00002000.80000000.3fe28036.00000300.00024000.00000000.00002000.80000000.3fe2a036.00000300.00022000.00000000.00002000.80000000.3fe2c036.00000300.00020000.00000000.00002000.80000000.3fe2e036.00000300.0001e000.00000000.00002000.80000000.3fe36036.00000300.0001c000.00000000.00002000.80000000.3fe38036.00000300.0001a000.00000000.00002000.80000000.3fe3a036.00000300.00018000.00000000.00002000.80000000.3fe3c036.00000300.00016000.00000000.00002000.80000000.3fe56036.00000300.00014000.00000000.00002000.80000000.3fe44036.00000300.00012000.00000000.00002000.80000000.3fe3e036.00000300.00010000.00000000.00002000.80000000.3fe40036.00000300.0000e000.00000000.00002000.80000000.3fe42036.00000300.0000c000.00000000.00002000.80000000.3fe46036.00000300.0000a000.00000000.00002000.80000000.3fe48036.00000300.00008000.00000000.00002000.80000000.3fe4a036.00000300.00006000.00000000.00002000.80000000.3fe4c036.00000300.00004000.00000000.00002000.80000000.3fe4e036.00000300.00002000.00000000.00002000.80000000.3fe50036.00000000.fff70000.00000000.00010000.80000000.3ff700b6.00000000.fff64000.00000000.0000c000.80000000.3ff580b6.00000000.fff5e000.00000000.00002000.80000400.0fe0208e.00000000.fff5c000.00000000.00002000.800007fe.0000008e.00000000.fff5a000.00000000.00002000.80000000.3ff660b6.00000000.fff58000.00000000.00002000.80000000.3ff560b6.00000000.fff56000.00000000.00002000.800007fe.0000208e.00000000.fff54000.00000000.00002000.80000000.3ff520b6.00000000.fff52000.00000000.00002000.80000000.3effe0b6.00000000.fff46000.00000000.0000c000.80000400.0ff0008e.00000000.fff44000.00000000.00002000.80000400.0fc0008e.00000000.fff3c000.00000000.00008000.80000400.0fc1008e.00000000.fff38000.00000000.00004000.80000000.3ff4c0b6.00000000.fff36000.00000000.00002000.800007f6.0000008e.00000000.fff2a000.00000000.0000c000.80000400.0f60008e.00000000.fff28000.00000000.00002000.80000400.0f40008e.00000000.fff20000.00000000.00008000.80000400.0f41008e.00000000.fff1c000.00000000.00004000.80000000.3ff480b6.00000000.fff1a000.00000000.00002000.80000000.3ff260b6.00000000.fff0e000.00000000.0000c000.80000400.0e60008e.00000000.fff0c000.00000000.00002000.80000400.0e40008e.00000000.fff04000.00000000.00008000.80000400.0e41008e.00000000.fff00000.00000000.00004000.80000000.3ff440b6.00000000.fef00000.00000000.00100000.800007ff.f000008e.00000000.feefe000.00000000.00002000.800007ce.0000008e.00000000.feef2000.00000000.0000c000.80000400.0ef0008e.00000000.feef0000.00000000.00002000.80000400.0ec0008e.00000000.feee8000.00000000.00008000.80000400.0ec1008e.00000000.feee4000.00000000.00004000.80000000.3ff400b6.00000000.feee2000.00000000.00002000.800007c6.0000008e.00000000.feee0000.00000000.00002000.800007fe.0100008e.00000000.feede000.00000000.00002000.800007fe.0100008e.00000000.feed8000.00000000.00006000.80000000.3ff280b6.00000000.fedd8000.00000000.00100000.800007ff.f000008e.00000000.fedd6000.00000000.00002000.80000000.3ff320b6.00000000.fedd4000.00000000.00002000.80000000.3ff220b6.00000000.fedd2000.00000000.00002000.800007fe.0100008e.00000000.fedd0000.00000000.00002000.80000400.0fe0208e.00000000.fedce000.00000000.00002000.80000000.3ff160b6.00000000.fedcc000.00000000.00002000.80000000.3ff000b6.00000000.fedc8000.00000000.00004000.80000000.3fde80b6.00000000.fedc6000.00000000.00002000.800007fe.0100008e.00000000.f00d0000.00000000.00002000.80000000.3fd4c0b6.00000000.f00ce000.00000000.00002000.80000000.3fedc0b6.00000000.f00cc000.00000000.00002000.80000000.3fede0b6.00000000.f00ca000.00000000.00002000.80000000.3fee40b6.00000000.f00c8000.00000000.00002000.80000000.3fee60b6.00000000.f00c6000.00000000.00002000.80000000.3fee80b6.00000000.f00c4000.00000000.00002000.80000000.3feea0b6.00000000.f00c0000.00000000.00004000.80000000.3fef00b6.00000000.f00be000.00000000.00002000.80000000.3fef40b6.00000000.f00bc000.00000000.00002000.80000000.3feec0b6.00000000.f00ba000.00000000.00002000.80000000.3feee0b6.00000000.f00b8000.00000000.00002000.80000000.3fef60b6.00000000.f00b6000.00000000.00002000.80000000.3fefa0b6.00000000.f00b4000.00000000.00002000.80000000.3fefc0b6.00000000.f00b2000.00000000.00002000.80000000.3ff040b6.00000000.f00b0000.00000000.00002000.80000000.3ff060b6.00000000.f00ae000.00000000.00002000.80000000.3ff020b6.00000000.f00ac000.00000000.00002000.80000000.3ff0a0b6.00000000.f00aa000.00000000.00002000.80000000.3ff0c0b6.00000000.f00a8000.00000000.00002000.80000000.3ff080b6.00000000.f00a6000.00000000.00002000.80000000.3ff0e0b6.00000000.f00a4000.00000000.00002000.80000000.3ff100b6.00000000.f00a2000.00000000.00002000.80000000.3ff120b6.00000000.f00a0000.00000000.00002000.80000000.3ff140b6.00000000.f009e000.00000000.00002000.80000000.3ff180b6.00000000.f009c000.00000000.00002000.80000000.3ff1c0b6.00000000.f009a000.00000000.00002000.80000000.3ff200b6.00000000.f0098000.00000000.00002000.80000000.3ff1a0b6.00000000.f0096000.00000000.00002000.80000000.3ff1e0b6.00000000.f0094000.00000000.00002000.80000000.3ff240b6.00000000.f0090000.00000000.00004000.80000000.3ff2e0b6.00000000.f008a000.00000000.00006000.80000000.3ff340b6.00000000.f0088000.00000000.00002000.80000000.3ff540b6.00000000.f0086000.00000000.00002000.80000000.3ff500b6.00000000.f0084000.00000000.00002000.80000000.3ff3a0b6.00000000.f0082000.00000000.00002000.80000000.3ff3c0b6.00000000.f0080000.00000000.00002000.80000000.3ff3e0b6.00000000.f0000000.00000000.00080000.80000000.3ff800b6.00000000.78004000.00000000.00012000.80000000.3fe58036.00000000.78002000.00000000.00002000.80000000.3e000036.00000000.11780000.00000000.00400000.80000000.3ebfe036.00000000.10800000.00000000.00f80000.80000000.3d080036.00000000.10400000.00000000.00400000.80000000.3f400036.00000000.10000000.00000000.00400000.80000000.3f800036.00000000.00002000.00000000.009fe000.80000000.00002036 existing: 00000000.00000000.00000800.00000000.fffff800.00000000.00000800.00000000 available: fffff800.00000000.000007fc.00000000.00000310.0112a000.000004ef.feed6000.00000300.002cc000.0000000f.ffd28000.00000300.001b8000.00000000.00004000.00000300.0017c000.00000000.00036000.00000300.0013c000.00000000.00012000.00000300.000fc000.00000000.0003c000.00000001.00000000.000002ff.00002000.00000000.ffff0000.00000000.0000e000.00000000.78016000.00000000.77fea000.00000000.11b80000.00000000.66482000.00000000.00000000.00000000.10000000.00000000.f0800000.00000000.0e5c6000 page-size: 00002000 name: 'virtual-memory' Node 0xf0063280 ecache-associativity: 00000004 ecache-line-size: 00000040 sparc-version: 00000009 #dtlb-entries: 00000010 dcache-associativity: 00000004 dcache-line-size: 00000020 dcache-size: 00010000 #itlb-entries: 00000010 icache-associativity: 00000004 icache-line-size: 00000020 icache-size: 00008000 cpuid: 00000000 portid: 00000000 reg: 00000400.00000000.00000000.00010000 device_type: 'cpu' manufacturer#: 0000003e implementation#: 00000016 mask#: 00000024 ecache-size: 00100000 clock-frequency: 3bb94e80 name: 'SUNW,UltraSPARC-IIIi' Node 0xf0063a5c memory-control-register-1: 10000106.3e901c3d memory-layout: 42302f44.30000000.42302f44.31000000.42312f44.30000000.42312f44.31000000.01ff00ff.00ff00ff.0000ff00.ff00ffff.00800000.00000000.00005354.5758aeaf.b2b32c02.0406085e.5f626302.0406085e.5f62630c.0d131469.6a6d6e0c.0d131469.6a6d6e17.181c1f72.75797b17.181c1f72.75797b21.2327287e.7f838521.2327287e.7f83852c.2d313386.878e9035.37393c92.93969735.37393c92.9396973d.40444599.9ba1a23d.40444599.9ba1a248.494f50a5.a6aaab48.494f50a5.a6aaab53.545758ae.afb2b300 compatible: 'SUNW,UltraSPARC-IIIi,mc' + 'SUNW,mc' portid: 00000000 reg: 00000400.00000000.00000000.00000008 device_type: 'memory-controller' name: 'memory-controller' Node 0xf0063b98 available: 81000000.00000000.00000300.00000000.0000fd00.82000000.00000000.00100000.00000000.00010000.82000000.00000000.00130000.00000000.000d0000.82000000.00000000.00600000.00000000.bfa00000.82000000.00000000.e0000000.00000000.00000000 reg: 00000400.0ff00000.00000000.0000b000.00000400.0fc10000.00000000.00007020.000007f6.00000000.00000000.00000100.00000400.0ff80000.00000000.00010000 ranges: 00000000.00000000.00000000.000007f6.00000000.00000000.01000000.01000000.00000000.00000000.000007f6.01000000.00000000.01000000.02000000.00000000.00000000.000007f7.00000000.00000001.00000000.03000000.00000000.00000000.000007f7.00000000.00000001.00000000 virtual-dma: c0000000.20000000 #virtual-dma-size-cells: 00000001 #virtual-dma-addr-cells: 00000001 no-streaming-cache: clock-frequency: 03ef1480 bus-range: 00000000.00000000 bus-parity-generated: no-probe-list: '0' compatible: 'pci108e,a801' + 'pci108e,8001' name: 'pci' device_type: 'pci' #address-cells: 00000003 #size-cells: 00000002 implementation#: 00000023 version#: 00000004 portid: 0000001f interrupt-map: 00001000.00000000.00000000.00000001.f0063b98.00000008.00001000.00000000.00000000.00000002.f0063b98.00000009 ino-bitmap: 04000f00.001b0000 interrupt-map-mask: 00fff800.00000000.00000000.00000007 #interrupt-cells: 00000001 66mhz-capable: interrupts: 00000033.00000030.00000031.00000034.00000023 Node 0xf00a92ac local-mac-address: 0003ba71.845d assigned-addresses: 83001010.00000000.00200000.00000000.00200000.83001018.00000000.00110000.00000000.00010000 compatible: 'pci14e4,1648.108e.1648.0' + 'pci14e4,1648.108e.1648' + 'pci108e,1648' + 'pci14e4,1648.0' + 'pci14e4,1648' + 'pciclass,020000' + 'pciclass,0200' reg: 00001000.00000000.00000000.00000000.00000000.03001010.00000000.00000000.00000000.00200000 max-frame-size: 00010000 address-bits: 00000030 device_type: 'network' name: 'network' 66mhz-capable: fast-back-to-back: devsel-speed: 00000001 class-code: 00020000 interrupts: 00000001 latency-timer: 00000040 cache-line-size: 00000010 max-latency: 00000000 min-grant: 00000040 subsystem-id: 00001648 subsystem-vendor-id: 0000108e revision-id: 00000000 device-id: 00001648 vendor-id: 000014e4 Node 0xf00af180 local-mac-address: 0003ba71.845e assigned-addresses: 83001110.00000000.00400000.00000000.00200000.83001118.00000000.00120000.00000000.00010000 compatible: 'pci14e4,1648.108e.1648.0' + 'pci14e4,1648.108e.1648' + 'pci108e,1648' + 'pci14e4,1648.0' + 'pci14e4,1648' + 'pciclass,020000' + 'pciclass,0200' reg: 00001100.00000000.00000000.00000000.00000000.03001110.00000000.00000000.00000000.00200000 max-frame-size: 00010000 address-bits: 00000030 device_type: 'network' name: 'network' 66mhz-capable: fast-back-to-back: devsel-speed: 00000001 class-code: 00020000 interrupts: 00000002 latency-timer: 00000040 cache-line-size: 00000010 max-latency: 00000000 min-grant: 00000040 subsystem-id: 00001648 subsystem-vendor-id: 0000108e revision-id: 00000000 device-id: 00001648 vendor-id: 000014e4 Node 0xf006c5f0 available: 81000000.00000000.00000930.00000000.0000f6d0.82000000.00000000.00100000.00000000.00f00000.82000000.00000000.02000000.00000000.be000000.82000000.00000000.e0000000.00000000.10000000 reg: 00000400.0f600000.00000000.0000b000.00000400.0f410000.00000000.00007020.000007fe.00000000.00000000.00000100.00000400.0f780000.00000000.00010000 ranges: 00000000.00000000.00000000.000007fe.00000000.00000000.01000000.01000000.00000000.00000000.000007fe.01000000.00000000.01000000.02000000.00000000.00000000.000007ff.00000000.00000001.00000000.03000000.00000000.00000000.000007ff.00000000.00000001.00000000 virtual-dma: c0000000.20000000 #virtual-dma-size-cells: 00000001 #virtual-dma-addr-cells: 00000001 no-streaming-cache: clock-frequency: 01f78a40 bus-range: 00000000.00000000 bus-parity-generated: no-probe-list: '0' compatible: 'pci108e,a801' + 'pci108e,8001' name: 'pci' device_type: 'pci' #address-cells: 00000003 #size-cells: 00000002 implementation#: 00000023 version#: 00000004 portid: 0000001e interrupt-map: 00001000.00000000.00000000.00000001.f006c5f0.00000010.00001000.00000000.00000000.00000002.f006c5f0.00000011.00001000.00000000.00000000.00000003.f006c5f0.00000012.00001000.00000000.00000000.00000004.f006c5f0.00000013.00001800.00000000.00000000.00000001.f006c5f0.0000000c.00001800.00000000.00000000.00000002.f006c5f0.0000000d.00001800.00000000.00000000.00000003.f006c5f0.0000000e.00001800.00000000.00000000.00000004.f006c5f0.0000000f.00003000.00000000.00000000.00000001.f006c5f0.0000001b.00004000.00000000.00000000.00000001.f006c5f0.00000024.00005000.00000000.00000000.00000001.f006c5f0.00000027.00005800.00000000.00000000.00000001.f006c5f0.00000026.00006800.00000000.00000000.00000001.f006c5f0.00000018 ino-bitmap: 03fff000.0004fcd3 interrupt-map-mask: 00fff800.00000000.00000000.00000007 #interrupt-cells: 00000001 slot-names: 0000000c.50434931.00504349.3200 interrupts: 00000032.00000030.00000031.00000034.00000021 Node 0xf00919bc assigned-addresses: 81003810.00000000.00000000.00000000.00010000.82003814.00000000.00000000.00000000.00100000.82003818.00000000.00000000.00000000.00100000 interrupt-map: 00000000.00000320.00000001.f006c5f0.0000002e.00000000.00000800.00000001.f006c5f0.00000020.00000000.000003f8.00000001.f006c5f0.0000002c.00000000.000002e8.00000001.f006c5f0.0000002c.00000000.000003e8.00000001.f006c5f0.0000002c.00000000.00000666.00000001.f006c5f0.0000002d interrupt-map-mask: 00000003.00ffffff.0000000f #interrupt-cells: 00000001 ranges: 00000000.00000000.81003810.00000000.00000000.00010000.00000001.00000000.82003814.00000000.00000000.00100000.00000002.00000000.82003818.00000000.f0000000.00100000 reg: 00003800.00000000.00000000.00000000.00000000.81003810.00000000.00000000.00000000.00010000.82003814.00000000.00000000.00000000.00100000.82003818.00000000.f0000000.00000000.00100000 #size-cells: 00000001 #address-cells: 00000002 name: 'isa' devsel-speed: 00000001 class-code: 00060100 latency-timer: 00000000 cache-line-size: 00000000 max-latency: 00000000 min-grant: 00000000 revision-id: 00000000 device-id: 00001533 vendor-id: 000010b9 Node 0xf00929e8 sunw,location: 'U55' model: 'SUNW,254-0078' version: 'OBP 4.11.4 2003/07/23 08:04 Sun Fire V210/V240,Netra 240' + 'OBDIAG 4.11.4 2003/07/23 08:05 ' + 'POST 4.11.4 2003/07/23 11:42' name: 'flashprom' compatible: 'isa-flashprom' reg: 00000002.00000000.00100000.00000000.00000290.00000001 Node 0xf0093718 address: feee0070 reg: 00000000.00000070.00000002 compatible: 'isa-m5819p' model: 'm5819p' name: 'rtc' Node 0xf0094570 interrupt-map: 00000000.0000005c.00000001.f00919bc.0000002f interrupts: 00000001 reg: 00000000.00000320.00000002 device_type: 'i2c' compatible: 'pcf8584' #size-cells: 00000000 #address-cells: 00000002 name: 'i2c' Node 0xf009590c revision-id: 00000014 reg: 00000000.00000016 compatible: 'SUNW,i2c-imax' name: 'i2c-bridge' Node 0xf0095b10 revision-id: 00000014 reg: 00000000.00000018 compatible: 'SUNW,i2c-imax' name: 'i2c-bridge' Node 0xf0095d14 reg: 00000000.000000a2 compatible: 'i2c-at24c64' device_type: 'fru-prom' name: 'motherboard-fru-prom' Node 0xf0095fcc reg: 00000000.000000a8 compatible: 'i2c-at24c64' device_type: 'fru-prom' name: 'chassis-fru-prom' Node 0xf009627c reg: 00000000.000000b0 compatible: 'i2c-at24c64' device_type: 'fru-prom' name: 'power-supply-fru-prom' Node 0xf0096530 reg: 00000000.000000a4 compatible: 'i2c-at24c64' device_type: 'fru-prom' name: 'power-supply-fru-prom' Node 0xf00967e4 reg: 00000000.000000b6 compatible: 'i2c-at34c02' name: 'dimm-spd' Node 0xf00969a4 reg: 00000000.000000b8 compatible: 'i2c-at34c02' name: 'dimm-spd' Node 0xf0096b64 reg: 00000000.000000d0 compatible: 'i2c-ds1307' name: 'rscrtc' Node 0xf0096c24 reg: 00000000.00000050 compatible: 'i2c-at24c64' device_type: 'nvram' name: 'nvram' Node 0xf0097554 device_type: 'idprom' reg: 00000000.00000050 name: 'idprom' Node 0xf0097b0c reg: 00000000.00000044 compatible: 'i2c-pca9555' name: 'gpio' Node 0xf0097bcc reg: 00000000.00000046 compatible: 'i2c-pca9555' name: 'gpio' Node 0xf0097c8c reg: 00000000.0000004a compatible: 'i2c-pca9555' name: 'gpio' Node 0xf0097d4c reg: 00000000.00000068 compatible: 'i2c-pca9555' name: 'gpio' Node 0xf0097e0c reg: 00000000.00000088 compatible: 'i2c-pca9555' name: 'gpio' Node 0xf0097ecc reg: 00000000.00000070 compatible: 'i2c-pca9556' name: 'gpio' Node 0xf0097ff8 button: interrupts: 00000001 reg: 00000000.00000800.00000030 compatible: 'ali1535d+-power' + 'acpi-power' name: 'power' Node 0xf0098174 ignore-cd: sunw,location: 'SERMGT' reg: 00000000.000003f8.00000008 interrupts: 00000001 compatible: 'su16550' + 'su' device_type: 'serial' name: 'serial' Node 0xf0099bdc ignore-cd: sunw,location: 'TTYB' reg: 00000000.000002e8.00000008 interrupts: 00000001 compatible: 'su16550' + 'su' device_type: 'serial' name: 'serial' Node 0xf009b640 reg: 00000000.000003e8.00000008 interrupts: 00000001 compatible: 'rmc_comm' device_type: 'serial' name: 'rmc-comm' Node 0xf00b50e0 assigned-addresses: 81003010.00000000.00000000.00000000.00000010 ranges: 00000000.00000000.00003000.00000000.00000000.00000100.00000001.00000000.81003010.00000000.00000600.00000100.00000002.00000000.81003014.00000000.00000000.00000100 reg: 00003000.00000000.00000000.00000000.00000000.81003010.00000000.00000600.00000000.00000010 compatible: 'pci10b9,7101.0' + 'pci10b9,7101' + 'pciclass,000000' + 'pciclass,0000' #address-cells: 00000002 #size-cells: 00000001 name: 'pmu' devsel-speed: 00000001 class-code: 00000000 latency-timer: 00000000 cache-line-size: 00000000 max-latency: 00000000 min-grant: 00000000 revision-id: 00000000 device-id: 00007101 vendor-id: 000010b9 Node 0xf00b5cd0 reg: 00000000.00000000.00000100.00000001.00000000.00000100 #address-cells: 00000002 #size-cells: 00000000 interrupts: 00000001 compatible: 'i2c-smbus' name: 'i2c' Node 0xf00b721c register-mask: 00000000.00000002.00000000.00000001 reg: 80000000.0000008a.00000001.80000000.0000009c.00000001 compatible: 'pmugpio' name: 'gpio' Node 0xf00b73d8 assigned-addresses: 82005010.00000000.01000000.00000000.01000000 sunw,find-fcode: f00bc75c maximum-frame#: 0000ffff reg: 00005000.00000000.00000000.00000000.00000000.02005010.00000000.00000000.00000000.01000000 #size-cells: 00000000 #address-cells: 00000001 compatible: 'pci10b9,5237.3' + 'pci10b9,5237' + 'pciclass,0c0310' + 'pciclass,0c03' name: 'usb' fast-back-to-back: devsel-speed: 00000001 class-code: 000c0310 interrupts: 00000001 latency-timer: 00000040 cache-line-size: 00000000 max-latency: 00000050 min-grant: 00000000 revision-id: 00000003 device-id: 00005237 vendor-id: 000010b9 Node 0xf00bd5f8 assigned-addresses: 81006810.00000000.00000900.00000000.00000008.81006814.00000000.00000918.00000000.00000008.81006818.00000000.00000910.00000000.00000008.8100681c.00000000.00000908.00000000.00000008.81006820.00000000.00000920.00000000.00000010 reg: 00006800.00000000.00000000.00000000.00000000.01006810.00000000.00000000.00000000.00000008.01006814.00000000.00000000.00000000.00000004.01006818.00000000.00000000.00000000.00000008.0100681c.00000000.00000000.00000000.00000004.01006820.00000000.00000000.00000000.00000010 compatible: 'pci10b9,5229.c4' + 'pci10b9,5229' + 'pciclass,0101ff' + 'pciclass,0101' #address-cells: 00000002 device_type: 'ide' name: 'ide' fast-back-to-back: devsel-speed: 00000001 class-code: 000101ff interrupts: 00000001 latency-timer: 00000040 cache-line-size: 00000000 max-latency: 00000004 min-grant: 00000002 revision-id: 000000c4 device-id: 00005229 vendor-id: 000010b9 Node 0xf00c01d4 device_type: 'block' name: 'disk' compatible: 'ide-disk' Node 0xf00c0888 device_type: 'block' name: 'cdrom' compatible: 'ide-cdrom' Node 0xf0074d54 available: 81000000.00000000.00000b00.00000000.0000f500.82000000.00000000.00108000.00000000.bfef8000.82000000.00000000.e0000000.00000000.10000000 reg: 00000400.0e600000.00000000.0000b000.00000400.0e410000.00000000.00007020.000007ce.00000000.00000000.00000100.00000400.0e780000.00000000.00010000 ranges: 00000000.00000000.00000000.000007ce.00000000.00000000.01000000.01000000.00000000.00000000.000007ce.01000000.00000000.01000000.02000000.00000000.00000000.000007cf.00000000.00000001.00000000.03000000.00000000.00000000.000007cf.00000000.00000001.00000000 virtual-dma: c0000000.20000000 #virtual-dma-size-cells: 00000001 #virtual-dma-addr-cells: 00000001 no-streaming-cache: clock-frequency: 03ef1480 bus-range: 00000000.00000000 bus-parity-generated: no-probe-list: '0' compatible: 'pci108e,a801' + 'pci108e,8001' name: 'pci' device_type: 'pci' #address-cells: 00000003 #size-cells: 00000002 implementation#: 00000023 version#: 00000004 portid: 0000001c ino-bitmap: 0000000f.00170308 interrupt-map: 00000800.00000000.00000000.00000001.f0074d54.00000000.00000800.00000000.00000000.00000002.f0074d54.00000001.00000800.00000000.00000000.00000003.f0074d54.00000002.00000800.00000000.00000000.00000004.f0074d54.00000003.00001000.00000000.00000000.00000001.f0074d54.00000029.00001000.00000000.00000000.00000002.f0074d54.00000028 interrupt-map-mask: 00fff800.00000000.00000000.00000007 #interrupt-cells: 00000001 66mhz-capable: interrupts: 00000032.00000030.00000031.00000034.00000023 Node 0xf00c1248 assigned-addresses: 81001010.00000000.00000900.00000000.00000100.83001014.00000000.00100000.00000000.00002000.8300101c.00000000.00102000.00000000.00002000 device_type: 'scsi-2' clock-frequency: 02625a00 reg: 00001000.00000000.00000000.00000000.00000000.01001010.00000000.00000000.00000000.00000100.03001014.00000000.00000000.00000000.00002000.0300101c.00000000.00000000.00000000.00002000 name: 'scsi' compatible: 'pci1000,21.1000.1000.1' + 'pci1000,21.1000.1000' + 'pci1000,1000' + 'pci1000,21.1' + 'pci1000,21' + 'pciclass,010000' + 'pciclass,0100' 66mhz-capable: devsel-speed: 00000001 class-code: 00010000 interrupts: 00000001 latency-timer: 00000040 cache-line-size: 00000010 max-latency: 00000012 min-grant: 00000011 subsystem-id: 00001000 subsystem-vendor-id: 00001000 revision-id: 00000001 device-id: 00000021 vendor-id: 00001000 Node 0xf00c5a40 device_type: 'block' compatible: 'sd' name: 'disk' Node 0xf00c65d0 device_type: 'byte' compatible: 'st' name: 'tape' Node 0xf00c7344 assigned-addresses: 81001110.00000000.00000a00.00000000.00000100.83001114.00000000.00104000.00000000.00002000.8300111c.00000000.00106000.00000000.00002000 device_type: 'scsi-2' clock-frequency: 02625a00 reg: 00001100.00000000.00000000.00000000.00000000.01001110.00000000.00000000.00000000.00000100.03001114.00000000.00000000.00000000.00002000.0300111c.00000000.00000000.00000000.00002000 name: 'scsi' compatible: 'pci1000,21.1000.1000.1' + 'pci1000,21.1000.1000' + 'pci1000,1000' + 'pci1000,21.1' + 'pci1000,21' + 'pciclass,010000' + 'pciclass,0100' 66mhz-capable: devsel-speed: 00000001 class-code: 00010000 interrupts: 00000002 latency-timer: 00000040 cache-line-size: 00000010 max-latency: 00000012 min-grant: 00000011 subsystem-id: 00001000 subsystem-vendor-id: 00001000 revision-id: 00000001 device-id: 00000021 vendor-id: 00001000 Node 0xf00cbb3c device_type: 'block' compatible: 'sd' name: 'disk' Node 0xf00cc6cc device_type: 'byte' compatible: 'st' name: 'tape' Node 0xf007d404 available: 81000000.00000000.00000300.00000000.0000fd00.82000000.00000000.00100000.00000000.00010000.82000000.00000000.00130000.00000000.000d0000.82000000.00000000.00600000.00000000.bfa00000.82000000.00000000.e0000000.00000000.00000000 reg: 00000400.0ef00000.00000000.0000b000.00000400.0ec10000.00000000.00007020.000007c6.00000000.00000000.00000100.00000400.0ef80000.00000000.00010000 ranges: 00000000.00000000.00000000.000007c6.00000000.00000000.01000000.01000000.00000000.00000000.000007c6.01000000.00000000.01000000.02000000.00000000.00000000.000007c7.00000000.00000001.00000000.03000000.00000000.00000000.000007c7.00000000.00000001.00000000 virtual-dma: c0000000.20000000 #virtual-dma-size-cells: 00000001 #virtual-dma-addr-cells: 00000001 no-streaming-cache: clock-frequency: 03ef1480 bus-range: 00000000.00000000 bus-parity-generated: no-probe-list: '0' compatible: 'pci108e,a801' + 'pci108e,8001' name: 'pci' device_type: 'pci' #address-cells: 00000003 #size-cells: 00000002 implementation#: 00000023 version#: 00000004 portid: 0000001d ino-bitmap: 300000f0.00080000 interrupt-map: 00000800.00000000.00000000.00000001.f007d404.00000004.00000800.00000000.00000000.00000002.f007d404.00000005.00000800.00000000.00000000.00000003.f007d404.00000006.00000800.00000000.00000000.00000004.f007d404.00000007.00001000.00000000.00000000.00000001.f007d404.0000001c.00001000.00000000.00000000.00000002.f007d404.0000001d interrupt-map-mask: 00fff800.00000000.00000000.00000007 #interrupt-cells: 00000001 66mhz-capable: slot-names: 00000002.50434933.00 interrupts: 00000033.00000030.00000031.00000034.00000025 Node 0xf009d478 local-mac-address: 0003ba71.845f assigned-addresses: 83001010.00000000.00200000.00000000.00200000.83001018.00000000.00110000.00000000.00010000 compatible: 'pci14e4,1648.108e.1648.0' + 'pci14e4,1648.108e.1648' + 'pci108e,1648' + 'pci14e4,1648.0' + 'pci14e4,1648' + 'pciclass,020000' + 'pciclass,0200' reg: 00001000.00000000.00000000.00000000.00000000.03001010.00000000.00000000.00000000.00200000 max-frame-size: 00010000 address-bits: 00000030 device_type: 'network' name: 'network' 66mhz-capable: fast-back-to-back: devsel-speed: 00000001 class-code: 00020000 interrupts: 00000001 latency-timer: 00000040 cache-line-size: 00000010 max-latency: 00000000 min-grant: 00000040 subsystem-id: 00001648 subsystem-vendor-id: 0000108e revision-id: 00000000 device-id: 00001648 vendor-id: 000014e4 Node 0xf00a334c local-mac-address: 0003ba71.8460 assigned-addresses: 83001110.00000000.00400000.00000000.00200000.83001118.00000000.00120000.00000000.00010000 compatible: 'pci14e4,1648.108e.1648.0' + 'pci14e4,1648.108e.1648' + 'pci108e,1648' + 'pci14e4,1648.0' + 'pci14e4,1648' + 'pciclass,020000' + 'pciclass,0200' reg: 00001100.00000000.00000000.00000000.00000000.03001110.00000000.00000000.00000000.00200000 max-frame-size: 00010000 address-bits: 00000030 device_type: 'network' name: 'network' 66mhz-capable: fast-back-to-back: devsel-speed: 00000001 class-code: 00020000 interrupts: 00000002 latency-timer: 00000040 cache-line-size: 00000010 max-latency: 00000000 min-grant: 00000040 subsystem-id: 00001648 subsystem-vendor-id: 0000108e revision-id: 00000000 device-id: 00001648 vendor-id: 000014e4 -- SPARC boot failed: Illegal Instruction https://launchpad.net/bugs/40119 From themuso at themuso.com Wed Apr 19 13:00:39 2006 From: themuso at themuso.com (Luke Yelavich) Date: Wed, 19 Apr 2006 13:00:39 -0000 Subject: [Bug 40158] TerraTec DMX 6Fire 24/96 front S/PDIF coaxial input not working. References: <20060419130039.8468.60497.malonedeb@gandwana.ubuntu.com> Message-ID: <20060419130039.8468.60497.malonedeb@gandwana.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: When attempting to receive audio/sync my TerraTec DMX 6fire 24/96 with either a Delta 66, or a Delta 1010LT, nothing happens. If I am playing audio through the TerraTec at the time I change the sync source, the card sample rate is set to 96Khz, but no sync is received from the other card. This seems to have been fixed in a recent version of ALSA, around 1.0.11rc3 I think, as the 2.6.17-rc1 changelog mentions a fair number of DMX 6Fire fixes. Also testing the 1.0.11rc5 tarball on my system shows that the problem has been fixed. -- TerraTec DMX 6Fire 24/96 front S/PDIF coaxial input not working. https://launchpad.net/bugs/40158 From fabbione at ubuntu.com Wed Apr 19 13:01:49 2006 From: fabbione at ubuntu.com (Fabio Massimo Di Nitto) Date: Wed, 19 Apr 2006 13:01:49 -0000 Subject: [Bug 40119] Re: SPARC boot failed: Illegal Instruction References: <20060419084429.8468.45532.malonedeb@gandwana.ubuntu.com> Message-ID: <20060419130149.21526.10169.malone@gangotri.ubuntu.com> Ok thanks. I think there is also an issue in the silo that was used to build that image. I strongly suggest to try Beta release tomorrow (not now!) and/or netinstall. Please also next time use the attach file to bug feature in launchpad instead of pasting an entire file in a comment. Fabio -- SPARC boot failed: Illegal Instruction https://launchpad.net/bugs/40119 From andrew.conkling at gmail.com Wed Apr 19 13:33:28 2006 From: andrew.conkling at gmail.com (Andrew Conkling) Date: Wed, 19 Apr 2006 13:33:28 -0000 Subject: [Bug 23258] Re: Synaptic lock up when installing linux-image References: <20060113142245.21012.7304.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060419133328.8468.76082.malone@gandwana.ubuntu.com> This is a few months old and I just noticed all my evms problems go away with the latest round of updates. Please reopen this bug if problems persist. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Needs Info => Fix Released -- Synaptic lock up when installing linux-image https://launchpad.net/bugs/23258 From vyruss at freemail.gr Wed Apr 19 13:39:28 2006 From: vyruss at freemail.gr (Jimmy Angelakos) Date: Wed, 19 Apr 2006 13:39:28 -0000 Subject: [Bug 37554] Re: USB Printing problem References: <20060401062148.5415.53902.malonedeb@gangotri.ubuntu.com> Message-ID: <20060419133929.21526.8536.malone@gangotri.ubuntu.com> No, I'm afraid it still doesn't work. What's strange is that parallel printing with the same printer works! That's why I originally filed this as a kernel bug... -- USB Printing problem https://launchpad.net/bugs/37554 From themuso at themuso.com Wed Apr 19 13:41:02 2006 From: themuso at themuso.com (Luke Yelavich) Date: Wed, 19 Apr 2006 13:41:02 -0000 Subject: [Bug 40158] Re: TerraTec DMX 6Fire 24/96 front S/PDIF coaxial input not working. References: <20060419130039.8468.60497.malonedeb@gandwana.ubuntu.com> Message-ID: <20060419134102.8495.31938.launchpad@gandwana.ubuntu.com> ** Changed in: linux-source-2.6.15 (Ubuntu) Assignee: (unassigned) => Ubuntu Kernel Team -- TerraTec DMX 6Fire 24/96 front S/PDIF coaxial input not working. https://launchpad.net/bugs/40158 From ben.collins at ubuntu.com Wed Apr 19 14:12:09 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Wed, 19 Apr 2006 14:12:09 -0000 Subject: [Bug 38278] Re: wifi card don't work. isl3886 is required but not installed References: <20060405203926.24486.7083.malonedeb@gangotri.ubuntu.com> Message-ID: <20060419141209.21526.15716.malone@gangotri.ubuntu.com> Will be in post-beta kernel. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Confirmed => Fix Committed -- wifi card don't work. isl3886 is required but not installed https://launchpad.net/bugs/38278 From hramrach at centrum.cz Wed Apr 19 14:55:05 2006 From: hramrach at centrum.cz (Michal Suchanek) Date: Wed, 19 Apr 2006 14:55:05 -0000 Subject: [Bug 39815] Cannot install from CD-ROM with broken DMA References: <20060416223139.16492.75309.malonedeb@gandwana.ubuntu.com> Message-ID: <20060419145505.21557.5679.launchpad@canonical@gangotri.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: I tried installing on an old Pentium (I) system but the installer won't work. It booted, detected hardware, went through language and keyboard selection. And then produced a kernel panic. The panic was in something like cdrom_start_read. The cd-rom is an old Mitsumi 8x drive that never worked well with DMA. It usually either locked up or crashed the system when dma was enabled. I was able to finish the installation by manually turning off dma in the second terminal. However, the installed system is not of much use. It enables dma automatically, and hdparm is not installed to turn dma off. Note that I was able to install Hoary (and quite a few other earlier distros) using this exact cdrom drive. -- Cannot install from CD-ROM with broken DMA https://launchpad.net/bugs/39815 From cjwatson at canonical.com Wed Apr 19 14:55:04 2006 From: cjwatson at canonical.com (Colin Watson) Date: Wed, 19 Apr 2006 14:55:04 -0000 Subject: [Bug 39815] Re: Cannot install from CD-ROM with broken DMA References: <20060416223139.16492.75309.malonedeb@gandwana.ubuntu.com> Message-ID: <20060419145505.21557.80230.malone@gangotri.ubuntu.com> Kernel panics are kernel bugs, so I'll send this there. As a workaround, booting with the 'cdrom-detect/cdrom_hdparm=-d0' parameter should help. ** Changed in: debian-installer (Ubuntu) Sourcepackagename: debian-installer => linux-source-2.6.15 -- Cannot install from CD-ROM with broken DMA https://launchpad.net/bugs/39815 From ben.collins at ubuntu.com Wed Apr 19 15:08:29 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Wed, 19 Apr 2006 15:08:29 -0000 Subject: [Bug 39985] Re: amd64 boot prints messages even with 'quiet' References: <20060418105855.1684.67321.malonedeb@gangotri.ubuntu.com> Message-ID: <20060419150829.8495.74222.malone@gandwana.ubuntu.com> I disabled the direct mapping table line. However, I left the "Booting the kernel" line since it's also in x86, and it also help us know where the kernel is if it freezes (this is the point where it leaves the decompress code, and jumps into the actual kernel). This line actually helped to find a bug before. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Unconfirmed => Fix Committed -- amd64 boot prints messages even with 'quiet' https://launchpad.net/bugs/39985 From mark at reitblatt.com Wed Apr 19 16:10:57 2006 From: mark at reitblatt.com (Mark Reitblatt) Date: Wed, 19 Apr 2006 16:10:57 -0000 Subject: [Bug 39958] Re: Trying to access unmounted SMBFS share in Rhythmbox causes entire system crash References: <20060418054930.1684.32955.malonedeb@gangotri.ubuntu.com> Message-ID: <20060419161057.21557.45891.launchpad@gangotri.ubuntu.com> ** Attachment added: "dmesg output" http://librarian.launchpad.net/2188049/dmesg.txt -- Trying to access unmounted SMBFS share in Rhythmbox causes entire system crash https://launchpad.net/bugs/39958 From jg at laptop.org Wed Apr 19 17:44:47 2006 From: jg at laptop.org (Jim Gettys) Date: Wed, 19 Apr 2006 17:44:47 -0000 Subject: [Bug 35455] After hibernate, cooling on nc6220 does not restart References: <20060318120346.12254.9646.malonedeb@gandwana.ubuntu.com> Message-ID: <20060419174447.8468.49871.launchpad@canonical@gandwana.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Critical Priority: (none set) Status: Needs Info Description: I have an HP nc6220 laptop. After a hibernate, on resume, the machine resumed successfully, but did not properly restart the fans. After a while, the system shut itself down (reasonably gracefully as such things go). I didn't notice the machine was getting hot until the shutdown sequence started, as I was lying in bed with a cover between the laptop and my legs. But boy was the poor laptop hot by that point. Linux version 2.6.15-18-686 (buildd at rothera) (gcc version 4.0.3 20060304 (prerelease) (Ubuntu 4.0.2-10ubuntu1)) #1 SMP PREEMPT Thu Mar 9 15:29:22 UTC 2006 Note: the original reporter indicated the bug was in package 'linux-image'; however, that package was not published in Ubuntu. -- After hibernate, cooling on nc6220 does not restart https://launchpad.net/bugs/35455 From karvinen+launchpad at iki.fi Wed Apr 19 17:46:59 2006 From: karvinen+launchpad at iki.fi (Tero Karvinen) Date: Wed, 19 Apr 2006 17:46:59 -0000 Subject: [Bug 33372] Cannot wake up from suspend and hibernate References: <20060302085058.17498.86100.malonedeb@gangotri.ubuntu.com> Message-ID: <20060419174659.8495.94125.launchpad@canonical@gandwana.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 acpi-support (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: Computer does not wake up from suspend (suspend-to-ram s3) and hibernate (to hard disk). To reproduce 1. Choose System:LogOut:Suspend. The machine goes to sleep in a couple of seconds, and the fan shuts off, just like it should. 2. Press any key to wake up (computer should wake up in seconds to the state is was before suspend) 3. Computer reads the disk for a while, but screen stays blank. Nothing happens (not even lights blinking) when pressing numlock, alt-ctrl-del, alt-ctrl-backspace. Also, computer fails to wake up from hibernate. The problem is shown with Dapper Flight CD 3 with latest updates on 2006-03-02: gnome-power-manager 2.13.92-0ubuntu1, hal 0.5.7-1ubuntu1, Linux 2.6.15-16-386. I am using Acer Travelmate 3000 (3004WTMi). It used to work out of the box with Dapper Flight CD 3 with updates at 2006-02-12: "Power Manager 2.13.5", linux 2.6.15-15, gnome-applets 2.13.3-0ubuntu1 and hal 0.5.6-1ubuntu3, 915resolution 0.5.1 compiled from source with my script. I described a mostly working setup in #3490 and http://www.iki.fi/karvinen/acer_travelmate_3004wtmi_with_linux.html -- Cannot wake up from suspend and hibernate https://launchpad.net/bugs/33372 From mjg59 at codon.org.uk Wed Apr 19 17:44:47 2006 From: mjg59 at codon.org.uk (Matthew Garrett) Date: Wed, 19 Apr 2006 17:44:47 -0000 Subject: [Bug 35455] Re: After hibernate, cooling on nc6220 does not restart References: <20060318120346.12254.9646.malonedeb@gandwana.ubuntu.com> Message-ID: <20060419174447.8468.87969.launchpad@gandwana.ubuntu.com> ** Changed in: acpi-support (Ubuntu) Sourcepackagename: acpi-support => linux-source-2.6.15 -- After hibernate, cooling on nc6220 does not restart https://launchpad.net/bugs/35455 From alan.pater at gmail.com Wed Apr 19 17:55:03 2006 From: alan.pater at gmail.com (Alan Pater) Date: Wed, 19 Apr 2006 17:55:03 -0000 Subject: [Bug 37672] Resume from sleep fails for HP compaq nw8000 laptop References: <20060402020055.5441.30762.malonedeb@gangotri.ubuntu.com> Message-ID: <20060419175503.21526.46239.launchpad@canonical@gangotri.ubuntu.com> Public bug reported: Affects: acpi (upstream) Severity: Unknown Priority: Unknown Status: Confirmed Affects: linux-source-2.6.15 acpi-support (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: The system sleeps via the logout dialog or by enabling sleep on lid close. However, it does not resume. What it does do on resume is: > Screen flashes and reponds to the brightness buttons, but does not show any image. > Mute button lights up, but the volume buttons remain unresponsive > Wireless Radio Light turns on. However, attempts to ping the last know IP address from a different machine fails. > Hard Drive Light comes on and stays on > Keyboard is responsive, Caps lock & Num lock seem to work. Ctrl-Alt-F1 and then Ctrl-Alt-F7 kills the keyboard. > Fan does not turn on. Laptop details are found here: https://wiki.ubuntu.com/LaptopTestingTeam/HPNW8000 Please let me know what other details I can provide. Thanks! -- Resume from sleep fails for HP compaq nw8000 laptop https://launchpad.net/bugs/37672 From mjg59 at codon.org.uk Wed Apr 19 17:46:59 2006 From: mjg59 at codon.org.uk (Matthew Garrett) Date: Wed, 19 Apr 2006 17:46:59 -0000 Subject: [Bug 33372] Re: Cannot wake up from suspend and hibernate References: <20060302085058.17498.86100.malonedeb@gangotri.ubuntu.com> Message-ID: <20060419174659.8495.25002.launchpad@gandwana.ubuntu.com> ** Changed in: acpi-support (Ubuntu) Sourcepackagename: acpi-support => linux-source-2.6.15 -- Cannot wake up from suspend and hibernate https://launchpad.net/bugs/33372 From mjg59 at codon.org.uk Wed Apr 19 17:55:02 2006 From: mjg59 at codon.org.uk (Matthew Garrett) Date: Wed, 19 Apr 2006 17:55:02 -0000 Subject: [Bug 37672] Re: Resume from sleep fails for HP compaq nw8000 laptop References: <20060402020055.5441.30762.malonedeb@gangotri.ubuntu.com> Message-ID: <20060419175503.21526.97938.malone@gangotri.ubuntu.com> May be better with the next kernel release ** Changed in: acpi-support (Ubuntu) Sourcepackagename: acpi-support => linux-source-2.6.15 -- Resume from sleep fails for HP compaq nw8000 laptop https://launchpad.net/bugs/37672 From mjg59 at codon.org.uk Wed Apr 19 17:54:23 2006 From: mjg59 at codon.org.uk (Matthew Garrett) Date: Wed, 19 Apr 2006 17:54:23 -0000 Subject: [Bug 35319] Re: no Fn at all Vaio SZ1XP Dapper References: <20060317124552.11105.6446.malonedeb@gandwana.ubuntu.com> Message-ID: <20060419175423.8468.60446.malone@gandwana.ubuntu.com> Ok. Ben, this sounds like the correct fix. -- no Fn at all Vaio SZ1XP Dapper https://launchpad.net/bugs/35319 From vincent.trouilliez at modulonet.fr Wed Apr 19 18:01:11 2006 From: vincent.trouilliez at modulonet.fr (Trouilliez vincent) Date: Wed, 19 Apr 2006 18:01:11 -0000 Subject: [Bug 37220] [Dapper] Suspend to RAM : fails to resume References: <20060329204223.7836.34507.malonedeb@gangotri.ubuntu.com> Message-ID: <20060419180111.8495.6120.launchpad@canonical@gandwana.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 acpi-support (Ubuntu) Severity: Minor Priority: (none set) Status: Unconfirmed Description: Hibernation works perfectly on my Desktop, but suspend to RAM does not. When I log out and select "Sleep" from the log-out dialog, instantly, the screen goes black and the hard drives and power supply go off, looks good. But when I press the power button to wake it up, instead of quickly restoring the desktop, it just does a normal boot sequence, GRUB, loading the kernel, loading the services, starting X, loading Gnome etc... As a quick test, I tried with Windows XP, and suspend to RAM works perfectly. The motheboard is a bit old (4 years) but as far as I can gather from the BIOS manual, it supports ACPI, and suspend to RAM. I have enabled ACPI events, selected "S3" (had the choice between S1 and S3). I don't really know what's involved H/W wise, so not sure what info is relevant/helpful. Should I attach the output of dmidecode or anything else ? - Motherboard is a MSI K7N420 Pro, 'nForce' chipset. - Video card is an AGP ATI Radeon 9250, driver: 'ati' - CPU is AMD Athlon XP 1700+ - RAM: 768MB - Kernel : 2.6.15-19-386 -- [Dapper] Suspend to RAM : fails to resume https://launchpad.net/bugs/37220 From kl at 3dots.de Wed Apr 19 18:02:57 2006 From: kl at 3dots.de (Kai F. Lahmann) Date: Wed, 19 Apr 2006 18:02:57 -0000 Subject: [Bug 21633] battery information tells nonsence References: <20060113141356.21012.12796.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060419180257.21526.5565.launchpad@canonical@gangotri.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 acpi-support (Ubuntu) Severity: Normal Priority: Medium Assignee: Matthew Garrett Status: Confirmed Description: Laptop: Asus M2400N. Situation with hoary: fully working battery state infomation without any problems. Situation with breezy: the system is nearly always reporting, it uses the battery. Only after plugging in the power supply it shows this correctly, but get's back to "using battery" as the battery is fully charged. From time to time the gnome applet even reports, the battery has "1% charge, enough for 600 minutes" and similar (slightly different numbers) more funny messages. -- battery information tells nonsence https://launchpad.net/bugs/21633 From jdagost1 at binghamton.edu Wed Apr 19 18:03:16 2006 From: jdagost1 at binghamton.edu (Jacob D'Agostino) Date: Wed, 19 Apr 2006 18:03:16 -0000 Subject: [Bug 22259] Suspend-to-RAM and Suspend-to-disk don't work References: <20060113141717.21012.29091.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060419180316.21557.10369.launchpad@canonical@gangotri.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 acpi-support (Ubuntu) Severity: Normal Priority: Medium Assignee: Matthew Garrett Status: Unconfirmed Description: I'm using a Uniwill N258KA0 laptop and I can't wake back up from either kind of suspend. Attempting to recover from a suspend-to-disk results in my machine rebooting unexpectedly while it's in the middle of kernel loading, and attempting to recover from a suspend-to-RAM results in my backlight never coming back on and my machine becoming otherwise unresponsive. I'm running 5.10, with all the latest updates as of 2005-09-22 -- Suspend-to-RAM and Suspend-to-disk don't work https://launchpad.net/bugs/22259 From sb73542 at safe-mail.net Wed Apr 19 18:03:55 2006 From: sb73542 at safe-mail.net (S.W.B.) Date: Wed, 19 Apr 2006 18:03:55 -0000 Subject: [Bug 22609] Breezy P1, Thinkpad 600- Suspend breaks USB References: <20060113141917.21012.11786.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060419180355.8468.23897.launchpad@canonical@gandwana.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 acpi-support (Ubuntu) Severity: Normal Priority: Medium Assignee: Matthew Garrett Status: Unconfirmed Description: Hello, I'd just like to mention a long-standing bug (regression) in Ubuntu's kernels which still persists with the 2.6.12 kernel that shipped with Breezy Preview. I have an IBM Thinkpad 600 which is currently running Hoary. When I upgraded from Warty-->Hoary (fresh install) I started experiencing problems with my USB mouse and USB camera not working after resuming from a suspend-to-ram. I have verified that this a change somewhere in the kernel caused this problem, because when I install the old 2.6.8 kernel from Warty on top of Hoary, USB works fine with suspend-to-ram. It broke possibly with 2.6.9 and surely with 2.6.10. This bug concerns the 2.6.12 kernel shipped with the Breezy Preview CD. Basically, it behaves exactly the same as the 2.6.10 kernel. I am unable to give good error messages at the moment because upgrading the libc seems to have broken all 3 of the terminals I have installed. I am sure that this is a regression in the kernel, and not in the APM or hotplug scripts (if there were any changes) because as I said, Warty's kernel fixes the issue on a fresh Hoary system, with no changes to any scripts. I'm not ready to upgrade to a full Breezy system yet, but I hope this bug report on the Breezy kernel only will be helpful. Please note the old report I made on this for Hoary (also a Preview version): http://bugzilla.ubuntu.com/show_bug.cgi?id=8565 Also please note a forum posting I made that has some more error messages. http://ubuntuforums.org/showthread.php?t=40867 This bug does not exist with any kernels I've tried as new as 2.6.11 coming from Mandrake. Thanks a lot! -- Breezy P1, Thinkpad 600- Suspend breaks USB https://launchpad.net/bugs/22609 From dan at digitaldan.com Wed Apr 19 18:04:46 2006 From: dan at digitaldan.com (Dan) Date: Wed, 19 Apr 2006 18:04:46 -0000 Subject: [Bug 22907] Suspend to ram almost works but has hda timeouts issues References: <20060113142050.21012.90687.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060419180446.21526.27740.launchpad@canonical@gangotri.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 acpi-support (Ubuntu) Severity: Normal Priority: Medium Assignee: Matthew Garrett Status: Confirmed Description: This is on a new Sony VGN-t350p laptop. I have enabled suspend to ram in acpi-support and am passing acpi_sleep=s3_bios on boot to the kernel. The laptop goes to sleep correctly, but when it wakes up I'm getting hda timeout errors in the system log, these take 60 or 120 seconds to reset. Everything else works though when the drives return. I have tried using the disable dma option in the acpi-support file , but with no luck. s3 sleep is so close!!! Sep 30 11:09:46 localhost dhclient: There is already a pid file /var/run/dhclient.eth1.pid with pid 6475 Sep 30 11:09:46 localhost dhclient: killed old client process, removed PID file Sep 30 11:09:46 localhost dhclient: Internet Systems Consortium DHCP Client V3.0.2 Sep 30 11:09:46 localhost dhclient: Copyright 2004 Internet Systems Consortium. Sep 30 11:09:46 localhost dhclient: All rights reserved. Sep 30 11:09:46 localhost dhclient: For info, please visit http://www.isc.org/products/DHCP Sep 30 11:09:46 localhost dhclient: Sep 30 11:09:46 localhost dhclient: sit0: unknown hardware address type 776 Sep 30 11:09:46 localhost dhclient: sit0: unknown hardware address type 776 Sep 30 11:09:46 localhost dhclient: Listening on LPF/eth1/00:13:ce:10:b6:35 Sep 30 11:09:46 localhost dhclient: Sending on LPF/eth1/00:13:ce:10:b6:35 Sep 30 11:09:46 localhost dhclient: Sending on Socket/fallback Sep 30 11:09:46 localhost dhclient: DHCPRELEASE on eth1 to 192.168.1.6 port 67 Sep 30 11:09:46 localhost dhclient: receive_packet failed on eth1: Network is down Sep 30 11:09:46 localhost kernel: [4295429.347000] bridge-eth1: disabling the bridge Sep 30 11:09:46 localhost kernel: [4295429.351000] bridge-eth1: down Sep 30 11:09:46 localhost kernel: [4295429.528000] ACPI: PCI interrupt for device 0000:02:0b.0 disabled Sep 30 11:09:46 localhost kernel: [4295429.544000] uhci_hcd 0000:00:1d.0: remove, state 1 Sep 30 11:09:46 localhost kernel: [4295429.544000] usb usb1: USB disconnect, address 1 Sep 30 11:09:47 localhost kernel: [4295429.703000] uhci_hcd 0000:00:1d.0: USB bus 1 deregistered Sep 30 11:09:47 localhost kernel: [4295429.706000] ACPI: PCI interrupt for device 0000:00:1d.0 disabled Sep 30 11:09:47 localhost kernel: [4295429.706000] uhci_hcd 0000:00:1d.1: remove, state 1 Sep 30 11:09:47 localhost kernel: [4295429.706000] usb usb2: USB disconnect, address 1 Sep 30 11:09:47 localhost kernel: [4295429.874000] uhci_hcd 0000:00:1d.1: USB bus 2 deregistered Sep 30 11:09:47 localhost kernel: [4295429.876000] ACPI: PCI interrupt for device 0000:00:1d.1 disabled Sep 30 11:09:47 localhost kernel: [4295429.876000] uhci_hcd 0000:00:1d.2: remove, state 1 Sep 30 11:09:47 localhost kernel: [4295429.876000] usb usb3: USB disconnect, address 1 Sep 30 11:09:47 localhost kernel: [4295429.876000] usb 3-1: USB disconnect, address 2 Sep 30 11:09:47 localhost hcid[7567]: HCI dev 0 down Sep 30 11:09:47 localhost hcid[7567]: Stoping security manager 0 Sep 30 11:09:47 localhost hcid[7567]: HCI dev 0 unregistered Sep 30 11:09:47 localhost kernel: [4295430.213000] uhci_hcd 0000:00:1d.2: USB bus 3 deregistered Sep 30 11:09:47 localhost kernel: [4295430.218000] ACPI: PCI interrupt for device 0000:00:1d.2 disabled Sep 30 11:09:47 localhost kernel: [4295430.235000] ehci_hcd 0000:00:1d.7: remove, state 1 Sep 30 11:09:47 localhost kernel: [4295430.235000] usb usb4: USB disconnect, address 1 Sep 30 11:09:47 localhost kernel: [4295430.388000] ehci_hcd 0000:00:1d.7: USB bus 4 deregistered Sep 30 11:09:47 localhost kernel: [4295430.424000] ACPI: PCI interrupt for device 0000:00:1d.7 disabled Sep 30 11:10:32 localhost kernel: [4295431.254000] Stopping tasks: ===============================================================================| Sep 30 11:10:32 localhost kernel: [4295431.260000] GTM info 78,3c,ffffffff,ffffffff,3 Sep 30 11:10:32 localhost kernel: [4295431.262000] GTM info 78,14,ffffffff,ffffffff,3 Sep 30 11:10:32 localhost kernel: [4295431.909000] ACPI: PCI interrupt for device 0000:02:08.0 disabled Sep 30 11:10:32 localhost kernel: [4295431.920000] ACPI: PCI interrupt for device 0000:02:04.0 disabled Sep 30 11:10:32 localhost kernel: [4295431.920000] ACPI: PCI interrupt for device 0000:00:1f.5 disabled Sep 30 11:10:32 localhost kernel: [4295431.920000] Back to C! Sep 30 11:10:32 localhost kernel: [4295445.063000] ACPI-0299: *** Error: No installed handler for fixed event [00000002] Sep 30 11:10:32 localhost kernel: [4295445.072000] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LNKA] -> GSI 9 (level, low) -> IRQ 9 Sep 30 11:10:32 localhost kernel: [4295445.072000] ACPI: PCI Interrupt 0000:00:1f.1[A]: no GSI Sep 30 11:10:32 localhost kernel: [4295445.072000] ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 9 (level, low) -> IRQ 9 Sep 30 11:11:35 localhost kernel: [4295445.072000] PCI: Setting latency timer of device 0000:00:1f.5 to 64 Sep 30 11:11:35 localhost kernel: [4295445.333000] ACPI: PCI Interrupt 0000:02:04.0[A] -> Link [LNKE] -> GSI 9 (level, low) -> IRQ 9 Sep 30 11:11:35 localhost kernel: [4295445.333000] PCI: Enabling device 0000:02:04.2 (0000 -> 0002) Sep 30 11:11:35 localhost kernel: [4295445.333000] ACPI: PCI Interrupt 0000:02:04.2[C] -> Link [LNKG] -> GSI 9 (level, low) -> IRQ 9 Sep 30 11:11:35 localhost kernel: [4295445.674000] Start STM Sep 30 11:11:35 localhost kernel: [4295445.675000] start GTF Sep 30 11:11:35 localhost kernel: [4295445.675000] data 3,1,0,0,0,a0,ef Sep 30 11:11:35 localhost kernel: [4295445.675000] data 3,41,0,0,0,a0,ef Sep 30 11:11:35 localhost kernel: [4295475.677000] hda: lost interrupt Sep 30 11:11:35 localhost kernel: [4295475.677000] Start STM Sep 30 11:11:35 localhost kernel: [4295475.678000] start GTF Sep 30 11:11:35 localhost hal.hotplug[8462]: DEVPATH is not set (subsystem input) Sep 30 11:11:35 localhost hal.hotplug[8447]: DEVPATH is not set (subsystem input) Sep 30 11:11:35 localhost kernel: [4295475.678000] data 3,1,0,0,0,a0,ef Sep 30 11:11:35 localhost kernel: [4295475.678000] data 3,42,0,0,0,a0,ef Sep 30 11:11:35 localhost kernel: [4295475.681000] Restarting tasks... done Sep 30 11:11:35 localhost kernel: [4295495.677000] hda: dma_timer_expiry: dma status == 0x21 Sep 30 11:11:35 localhost kernel: [4295505.677000] hda: DMA timeout error Sep 30 11:11:35 localhost kernel: [4295505.677000] hda: dma timeout error: status=0x50 { DriveReady SeekComplete } Sep 30 11:11:35 localhost kernel: [4295505.677000] Sep 30 11:11:35 localhost kernel: [4295505.677000] ide: failed opcode was: unknown Sep 30 11:11:35 localhost kernel: [4295505.677000] hda: status error: status=0x50 { DriveReady SeekComplete } Sep 30 11:11:35 localhost kernel: [4295505.677000] Sep 30 11:11:35 localhost kernel: [4295505.677000] ide: failed opcode was: unknown Sep 30 11:11:35 localhost kernel: [4295505.677000] hda: no DRQ after issuing MULTWRITE_EXT Sep 30 11:11:35 localhost kernel: [4295505.677000] hda: status error: status=0x50 { DriveReady SeekComplete } Sep 30 11:11:35 localhost kernel: [4295505.677000] Sep 30 11:11:35 localhost kernel: [4295505.677000] ide: failed opcode was: unknown Sep 30 11:11:35 localhost kernel: [4295505.677000] hda: no DRQ after issuing MULTWRITE_EXT Sep 30 11:11:35 localhost kernel: [4295535.677000] hda: lost interrupt Sep 30 11:11:35 localhost kernel: [4295535.677000] hda: status error: status=0x50 { DriveReady SeekComplete } Sep 30 11:11:35 localhost kernel: [4295535.677000] Sep 30 11:11:35 localhost kernel: [4295535.677000] ide: failed opcode was: unknown Sep 30 11:11:35 localhost kernel: [4295535.677000] hda: no DRQ after issuing MULTWRITE_EXT Sep 30 11:11:35 localhost kernel: [4295535.677000] hda: status error: status=0x50 { DriveReady SeekComplete } Sep 30 11:11:35 localhost kernel: [4295535.677000] Sep 30 11:11:35 localhost kernel: [4295535.677000] ide: failed opcode was: unknown Sep 30 11:11:35 localhost kernel: [4295535.677000] hda: no DRQ after issuing MULTWRITE_EXT Sep 30 11:11:35 localhost kernel: [4295535.727000] ide0: reset: success Sep 30 11:11:35 localhost kernel: [4295538.282000] alps.c: Enabling hardware tapping Sep 30 11:11:35 localhost kernel: [4295538.436000] input: PS/2 Mouse on isa0060/serio1 Sep 30 11:11:35 localhost kernel: [4295538.463000] input: AlpsPS/2 ALPS GlidePoint on isa0060/serio1 Sep 30 11:11:35 localhost hal.hotplug[8537]: DEVPATH is not set (subsystem input) Sep 30 11:11:35 localhost input.agent[8538]: tsdev: already loaded Sep 30 11:11:35 localhost input.agent[8538]: mousedev: already loaded Sep 30 11:11:35 localhost input.agent[8538]: evdev: already loaded Sep 30 11:11:35 localhost hal.hotplug[8611]: DEVPATH is not set (subsystem input) Sep 30 11:11:36 localhost input.agent[8612]: tsdev: already loaded Sep 30 11:11:36 localhost input.agent[8642]: evdev: already loaded Sep 30 11:11:36 localhost input.agent[8534]: evdev: already loaded Sep 30 11:11:36 localhost input.agent[8509]: evdev: already loaded Sep 30 11:11:36 localhost input.agent[8524]: evdev: already loaded Sep 30 11:11:36 localhost input.agent[8548]: evdev: already loaded Sep 30 11:11:36 localhost input.agent[8612]: mousedev: already loaded Sep 30 11:11:36 localhost input.agent[8612]: joydev: already loaded Sep 30 11:11:36 localhost kernel: [4295539.769000] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.0.6 Sep 30 11:11:36 localhost kernel: [4295539.769000] ipw2200: Copyright(c) 2003-2004 Intel Corporation Sep 30 11:11:36 localhost kernel: [4295539.778000] ACPI: PCI Interrupt 0000:02:0b.0[A] -> Link [LNKD] -> GSI 9 (level, low) -> IRQ 9 Sep 30 11:11:36 localhost kernel: [4295539.778000] ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection Sep 30 11:11:36 localhost input.agent[8612]: evdev: already loaded Sep 30 11:11:36 localhost input.agent[8677]: evdev: already loaded Sep 30 11:11:37 localhost kernel: [4295540.106000] USB Universal Host Controller Interface driver v2.2 Sep 30 11:11:37 localhost kernel: [4295540.107000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 9 (level, low) -> IRQ 9 Sep 30 11:11:37 localhost kernel: [4295540.107000] PCI: Setting latency timer of device 0000:00:1d.0 to 64 Sep 30 11:11:37 localhost kernel: [4295540.107000] uhci_hcd 0000:00:1d.0: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 Sep 30 11:11:37 localhost kernel: [4295540.175000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 Sep 30 11:11:37 localhost kernel: [4295540.175000] uhci_hcd 0000:00:1d.0: irq 9, io base 0x00001820 Sep 30 11:11:37 localhost kernel: [4295540.178000] hub 1-0:1.0: USB hub found Sep 30 11:11:37 localhost kernel: [4295540.178000] hub 1-0:1.0: 2 ports detected Sep 30 11:11:37 localhost kernel: [4295540.181000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 9 (level, low) -> IRQ 9 Sep 30 11:11:37 localhost kernel: [4295540.181000] PCI: Setting latency timer of device 0000:00:1d.1 to 64 Sep 30 11:11:37 localhost kernel: [4295540.181000] uhci_hcd 0000:00:1d.1: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 Sep 30 11:11:37 localhost kernel: [4295540.243000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 Sep 30 11:11:37 localhost kernel: [4295540.243000] uhci_hcd 0000:00:1d.1: irq 9, io base 0x00001840 Sep 30 11:11:37 localhost kernel: [4295540.245000] hub 2-0:1.0: USB hub found Sep 30 11:11:37 localhost kernel: [4295540.245000] hub 2-0:1.0: 2 ports detected Sep 30 11:11:37 localhost kernel: [4295540.248000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 9 (level, low) -> IRQ 9 Sep 30 11:11:37 localhost kernel: [4295540.248000] PCI: Setting latency timer of device 0000:00:1d.2 to 64 Sep 30 11:11:37 localhost kernel: [4295540.248000] uhci_hcd 0000:00:1d.2: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 Sep 30 11:11:37 localhost kernel: [4295540.310000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 Sep 30 11:11:37 localhost kernel: [4295540.310000] uhci_hcd 0000:00:1d.2: irq 9, io base 0x00001860 Sep 30 11:11:37 localhost kernel: [4295540.312000] hub 3-0:1.0: USB hub found Sep 30 11:11:37 localhost kernel: [4295540.312000] hub 3-0:1.0: 2 ports detected Sep 30 11:11:37 localhost kernel: [4295540.348000] ACPI: PCI Interrupt 0000:00:1d.7[D] -> Link [LNKH] -> GSI 9 (level, low) -> IRQ 9 Sep 30 11:11:37 localhost kernel: [4295540.348000] PCI: Setting latency timer of device 0000:00:1d.7 to 64 Sep 30 11:11:37 localhost kernel: [4295540.348000] ehci_hcd 0000:00:1d.7: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller Sep 30 11:11:37 localhost kernel: [4295540.348000] ehci_hcd 0000:00:1d.7: debug port 1 Sep 30 11:11:37 localhost kernel: [4295540.350000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4 Sep 30 11:11:37 localhost kernel: [4295540.350000] ehci_hcd 0000:00:1d.7: irq 9, io mem 0xe0100000 Sep 30 11:11:37 localhost kernel: [4295540.354000] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 Sep 30 11:11:37 localhost kernel: [4295540.354000] ehci_hcd 0000:00:1d.7: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004 Sep 30 11:11:37 localhost kernel: [4295540.356000] hub 4-0:1.0: USB hub found Sep 30 11:11:37 localhost kernel: [4295540.356000] hub 4-0:1.0: 6 ports detected Sep 30 11:11:37 localhost dhclient: There is already a pid file /var/run/dhclient.eth1.pid with pid 0 Sep 30 11:11:37 localhost dhclient: Internet Systems Consortium DHCP Client V3.0.2 Sep 30 11:11:37 localhost dhclient: Copyright 2004 Internet Systems Consortium. Sep 30 11:11:37 localhost dhclient: All rights reserved. Sep 30 11:11:37 localhost dhclient: For info, please visit http://www.isc.org/products/DHCP Sep 30 11:11:37 localhost dhclient: Sep 30 11:11:37 localhost dhclient: sit0: unknown hardware address type 776 Sep 30 11:11:37 localhost kernel: [4295540.467000] bridge-eth1: enabling the bridge Sep 30 11:11:37 localhost kernel: [4295540.467000] bridge-eth1: up Sep 30 11:11:37 localhost dhclient: sit0: unknown hardware address type 776 Sep 30 11:11:37 localhost dhclient: Listening on LPF/eth1/00:13:ce:10:b6:35 Sep 30 11:11:37 localhost dhclient: Sending on LPF/eth1/00:13:ce:10:b6:35 Sep 30 11:11:37 localhost dhclient: Sending on Socket/fallback Sep 30 11:11:38 localhost kernel: [4295540.983000] usb 3-1: new full speed USB device using uhci_hcd and address 2 Sep 30 11:11:38 localhost hcid[7567]: HCI dev 0 registered Sep 30 11:11:38 localhost hcid[7567]: HCI dev 0 up Sep 30 11:11:38 localhost hcid[7567]: Starting security manager 0 Sep 30 11:11:39 localhost kernel: [4295542.615000] ACPI: Lid Switch [LID0] Sep 30 11:11:39 localhost kernel: [4295542.615000] ACPI: Power Button (CM) [PWRB] Sep 30 11:11:41 localhost dhclient: DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 6 Sep 30 11:11:41 localhost dhclient: DHCPOFFER from 192.168.1.6 Sep 30 11:11:41 localhost dhclient: DHCPREQUEST on eth1 to 255.255.255.255 port 67 Sep 30 11:11:41 localhost dhclient: DHCPACK from 192.168.1.6 Sep 30 11:11:41 localhost dhclient: bound to 192.168.1.196 -- renewal in 286843 seconds. Sep 30 11:11:43 localhost usb.agent[9129]: usbcore: already loaded Sep 30 11:11:43 localhost usb.agent[9091]: usbcore: already loaded Sep 30 11:11:43 localhost usb.agent[9118]: usbcore: already loaded Sep 30 11:11:44 localhost usb.agent[9284]: hci_usb: already loaded Sep 30 11:11:44 localhost usb.agent[9292]: hci_usb: already loaded Sep 30 11:11:44 localhost usb.agent[9298]: hci_usb: already loaded Sep 30 11:11:44 localhost usb.agent[9260]: usbcore: already loaded Sep 30 11:11:47 localhost kernel: [4295550.885000] eth1: no IPv6 routers present -- Suspend to ram almost works but has hda timeouts issues https://launchpad.net/bugs/22907 From mjg59 at codon.org.uk Wed Apr 19 18:01:11 2006 From: mjg59 at codon.org.uk (Matthew Garrett) Date: Wed, 19 Apr 2006 18:01:11 -0000 Subject: [Bug 37220] Re: [Dapper] Suspend to RAM : fails to resume References: <20060329204223.7836.34507.malonedeb@gangotri.ubuntu.com> Message-ID: <20060419180111.8495.88247.launchpad@gandwana.ubuntu.com> ** Changed in: acpi-support (Ubuntu) Sourcepackagename: acpi-support => linux-source-2.6.15 -- [Dapper] Suspend to RAM : fails to resume https://launchpad.net/bugs/37220 From mjg59 at codon.org.uk Wed Apr 19 18:04:46 2006 From: mjg59 at codon.org.uk (Matthew Garrett) Date: Wed, 19 Apr 2006 18:04:46 -0000 Subject: [Bug 22907] Re: Suspend to ram almost works but has hda timeouts issues References: <20060113142050.21012.90687.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060419180446.21526.76899.malone@gangotri.ubuntu.com> We should really make sure that the kernel wakes things up properly ** Changed in: acpi-support (Ubuntu) Sourcepackagename: acpi-support => linux-source-2.6.15 -- Suspend to ram almost works but has hda timeouts issues https://launchpad.net/bugs/22907 From mjg59 at codon.org.uk Wed Apr 19 18:03:15 2006 From: mjg59 at codon.org.uk (Matthew Garrett) Date: Wed, 19 Apr 2006 18:03:15 -0000 Subject: [Bug 22259] Re: Suspend-to-RAM and Suspend-to-disk don't work References: <20060113141717.21012.29091.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060419180316.21557.2705.launchpad@gangotri.ubuntu.com> ** Changed in: acpi-support (Ubuntu) Sourcepackagename: acpi-support => linux-source-2.6.15 -- Suspend-to-RAM and Suspend-to-disk don't work https://launchpad.net/bugs/22259 From mjg59 at codon.org.uk Wed Apr 19 18:02:57 2006 From: mjg59 at codon.org.uk (Matthew Garrett) Date: Wed, 19 Apr 2006 18:02:57 -0000 Subject: [Bug 21633] Re: battery information tells nonsence References: <20060113141356.21012.12796.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060419180257.21526.14566.launchpad@gangotri.ubuntu.com> ** Changed in: acpi-support (Ubuntu) Sourcepackagename: acpi-support => linux-source-2.6.15 -- battery information tells nonsence https://launchpad.net/bugs/21633 From mjg59 at codon.org.uk Wed Apr 19 18:03:55 2006 From: mjg59 at codon.org.uk (Matthew Garrett) Date: Wed, 19 Apr 2006 18:03:55 -0000 Subject: [Bug 22609] Re: Breezy P1, Thinkpad 600- Suspend breaks USB References: <20060113141917.21012.11786.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060419180355.8468.55971.launchpad@gandwana.ubuntu.com> ** Changed in: acpi-support (Ubuntu) Sourcepackagename: acpi-support => linux-source-2.6.15 -- Breezy P1, Thinkpad 600- Suspend breaks USB https://launchpad.net/bugs/22609 From Joerg-Cyril.Hoehle at T-Systems.com Wed Apr 19 18:13:10 2006 From: Joerg-Cyril.Hoehle at T-Systems.com (=?utf-8?b?SsO2cmcgSMO2aGxl?=) Date: Wed, 19 Apr 2006 18:13:10 -0000 Subject: [Bug 25548] Re: Breezy sometimes does not manage to reboot References: <20060113143421.21012.59658.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060419181310.21557.60179.malone@gangotri.ubuntu.com> I'm Sorry, I should have closed this bug myself since I've not seen it repeated for some time. (And I'm still running Breezy, not Dapper). Regards, Jörg Höhle -- Breezy sometimes does not manage to reboot https://launchpad.net/bugs/25548 From dchest at gmail.com Wed Apr 19 18:28:28 2006 From: dchest at gmail.com (dchest) Date: Wed, 19 Apr 2006 18:28:28 -0000 Subject: [Bug 35973] Re: Suspend to ram no longer working on Panasonc CF-R4 (regression from breezy) References: <20060322091255.30442.54042.malonedeb@gangotri.ubuntu.com> Message-ID: <20060419182828.21557.31734.malone@gangotri.ubuntu.com> Same thing with Sony Vaio VGN-FS215MR. When going to hibernation, it turns screen off, then produces some "click" sound, then turns screen on and returns back to normal working state. -- Suspend to ram no longer working on Panasonc CF-R4 (regression from breezy) https://launchpad.net/bugs/35973 From sitsofe at yahoo.com Wed Apr 19 18:47:33 2006 From: sitsofe at yahoo.com (Sitsofe Wheeler) Date: Wed, 19 Apr 2006 18:47:33 -0000 Subject: [Bug 39800] Re: bcm43xx loses connection after 1 min References: <20060416194508.1627.69286.malonedeb@gangotri.ubuntu.com> Message-ID: <20060419184733.21526.24087.malone@gangotri.ubuntu.com> iroli: I meant to say Does restricting the wifi speed to 11Mbit using sudo iwconfig eth2 rate 11M make the problem go away? ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Unconfirmed => Needs Info -- bcm43xx loses connection after 1 min https://launchpad.net/bugs/39800 From sitsofe at yahoo.com Wed Apr 19 19:01:01 2006 From: sitsofe at yahoo.com (Sitsofe Wheeler) Date: Wed, 19 Apr 2006 19:01:01 -0000 Subject: [Bug 39572] Re: Detecting Network card during install. Dapper Flight 6 References: <20060414152316.16443.26974.malonedeb@gandwana.ubuntu.com> Message-ID: <20060419190101.8468.38398.malone@gandwana.ubuntu.com> Probably a dup of Bug #38186 -- Detecting Network card during install. Dapper Flight 6 https://launchpad.net/bugs/39572 From Joerg-Cyril.Hoehle at T-Systems.com Wed Apr 19 19:06:09 2006 From: Joerg-Cyril.Hoehle at T-Systems.com (=?utf-8?b?SsO2cmcgSMO2aGxl?=) Date: Wed, 19 Apr 2006 19:06:09 -0000 Subject: [Bug 40205] Since Breezy, vga=0x317 hangs in resume after suspend to disk References: <20060419190609.21526.36567.malonedeb@gangotri.ubuntu.com> Message-ID: <20060419190609.21526.36567.malonedeb@gangotri.ubuntu.com> Public bug reported: Affects: linux-source-2.6.12 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: Using vga=0x317 boot option works fine in Hoary, but breaks with Breezy upon resuming from suspend to disk mode. In case you didn't know, a line like nonaltoptions=vga=0x317 quiet nosplash in /boot/grub/menu.lst or a modification of the "kernel /boot... vga=0x317" line allows to benefit from resolutions like 127x60 console text mode in a 1024x768 display. This is very handy, and 80x25|43 is so limiting. Furthermore, some laptops are not able to scale the 80x25 mode, so there are huge black borders around the text area. When restarting the system, everything goes normally at first. But after some time, the resume process just freezes, displaying the following messages: [screen is cleared, shown output starts at top of screen] [4294768.653000] Stopping tasks: ====================================... [4... ] Freeing memory... done (37204 pages freed) [4... ] GTM info ... [2 times] [4... ] ACPI PCI interrupt ... disabled [3 times] [4... ] resume= option should be used to set suspend device.................................swsusp: Need to copy 36549 pages vga=0x317 is why I could not reproduce Bug #25551: I had not realized that this vga=xyz change caused the difference in behaviour. vga=0x317 works in Breezy when booting normally. The bug only shows after suspend to disk. Happens with both with linux-image-2.6.12-9 and -10 Regards, Jörg Höhle -- Since Breezy, vga=0x317 hangs in resume after suspend to disk https://launchpad.net/bugs/40205 From sitsofe at yahoo.com Wed Apr 19 19:06:32 2006 From: sitsofe at yahoo.com (Sitsofe Wheeler) Date: Wed, 19 Apr 2006 19:06:32 -0000 Subject: [Bug 39572] Re: Detecting Network card during install. Dapper Flight 6 References: <20060414152316.16443.26974.malonedeb@gandwana.ubuntu.com> Message-ID: <20060419190632.8495.67360.malone@gandwana.ubuntu.com> The lockups are probably a dup of Bug #37784 (and other sky2 bugs) -- Detecting Network card during install. Dapper Flight 6 https://launchpad.net/bugs/39572 From Joerg-Cyril.Hoehle at T-Systems.com Wed Apr 19 19:13:31 2006 From: Joerg-Cyril.Hoehle at T-Systems.com (=?utf-8?b?SsO2cmcgSMO2aGxl?=) Date: Wed, 19 Apr 2006 19:13:31 -0000 Subject: [Bug 40205] laptop hardware data References: <20060419190609.21526.36567.malonedeb@gangotri.ubuntu.com> Message-ID: <20060419191331.8468.5188.malone@gandwana.ubuntu.com> Fujitsu Siemens Centrino C110 lspci reports 0000:00:00.0 Host bridge: Intel Corp. 82852/855GM Host Bridge (rev 02) 0000:00:00.1 System peripheral: Intel Corp. 855GM/GME GMCH Memory I/O Control Registers (rev 02) 0000:00:00.3 System peripheral: Intel Corp. 855GM/GME GMCH Configuration Process Registers (rev 02) 0000:00:02.0 VGA compatible controller: Intel Corp. 82852/855GM Integrated Graphics Device (rev 02) 0000:00:02.1 Display controller: Intel Corp. 82852/855GM Integrated Graphics Device (rev 02) 0000:00:1d.0 USB Controller: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 03) 0000:00:1d.1 USB Controller: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 03) 0000:00:1d.2 USB Controller: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 (rev 03) 0000:00:1d.7 USB Controller: Intel Corp. 82801DB/DBM (ICH4/ICH4-M) USB 2.0 EHCI Controller (rev 03) 0000:00:1e.0 PCI bridge: Intel Corp. 82801 PCI Bridge (rev 83) 0000:00:1f.0 ISA bridge: Intel Corp. 82801DBM LPC Interface Controller (rev 03) 0000:00:1f.1 IDE interface: Intel Corp. 82801DBM (ICH4) Ultra ATA Storage Controller (rev 03) 0000:00:1f.3 SMBus: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller (rev 03) 0000:00:1f.5 Multimedia audio controller: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 03) 0000:00:1f.6 Modem: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller (rev 03) 0000:01:0a.0 CardBus bridge: O2 Micro, Inc. OZ6933 Cardbus Controller (rev 01) 0000:01:0a.1 CardBus bridge: O2 Micro, Inc. OZ6933 Cardbus Controller (rev 01) 0000:01:0c.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) 0000:01:0d.0 Network controller: Intel Corp. PRO/Wireless 2200BG (rev 05) -- Since Breezy, vga=0x317 hangs in resume after suspend to disk https://launchpad.net/bugs/40205 From alexanderjurjens at lycos.nl Wed Apr 19 19:20:31 2006 From: alexanderjurjens at lycos.nl (Alexander Jurjens) Date: Wed, 19 Apr 2006 19:20:31 -0000 Subject: [Bug 20943] Re: module insertion hangs in apic/irq setup References: <20060113141001.21012.82199.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060419192031.21526.96969.malone@gangotri.ubuntu.com> Hello, i've tried Flight 6 and the bug still exists. My computer now hangs at ""Loading hardware drivers...". I've also a laptop with Breezy on it and it runs fine! :) -- module insertion hangs in apic/irq setup https://launchpad.net/bugs/20943 From bryan at reigndropsfall.net Wed Apr 19 19:20:35 2006 From: bryan at reigndropsfall.net (Bryan Forbes) Date: Wed, 19 Apr 2006 19:20:35 -0000 Subject: [Bug 37112] Re: iBook G4, on resume from sleep, enables touch-to-click despite my preferences References: <20060329032925.6253.87634.malonedeb@gandwana.ubuntu.com> Message-ID: <20060419192035.8468.78295.malone@gandwana.ubuntu.com> Instead of running /etc/init.d/pbbuttonsd restart, just run pbbcmd reinit. It doesn't solve the problem, but it saves you from having to restart a daemon on resume. -- iBook G4, on resume from sleep, enables touch-to-click despite my preferences https://launchpad.net/bugs/37112 From bluekuja at gmail.com Wed Apr 19 21:00:47 2006 From: bluekuja at gmail.com (Andrea Veri) Date: Wed, 19 Apr 2006 21:00:47 -0000 Subject: [Bug 40220] linux-image-2.6.15-12-386 kernel have problems with my sound card References: <20060419204151.21526.71142.malonedeb@gangotri.ubuntu.com> Message-ID: <20060419210047.8495.63316.launchpad@canonical@gandwana.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: Booting my pc with this kernel i cant hear anything and i get an error that say "No sound card found in your system". WIth the before kernel all was working good. I use an intel-hda driver for my sound card, modules loaded seems to be the same in both of the kernels. Note: the original reporter indicated the bug was in package 'linux-image-2.6.15-12-386'; however, that package was not published in Ubuntu. -- linux-image-2.6.15-12-386 kernel have problems with my sound card https://launchpad.net/bugs/40220 From robitaille at gmail.com Wed Apr 19 21:00:46 2006 From: robitaille at gmail.com (Daniel Robitaille) Date: Wed, 19 Apr 2006 21:00:46 -0000 Subject: [Bug 40220] Re: linux-image-2.6.15-12-386 kernel have problems with my sound card References: <20060419204151.21526.71142.malonedeb@gangotri.ubuntu.com> Message-ID: <20060419210047.8495.5995.launchpad@gandwana.ubuntu.com> ** Changed in: Ubuntu Sourcepackagename: None => linux-source-2.6.15 -- linux-image-2.6.15-12-386 kernel have problems with my sound card https://launchpad.net/bugs/40220 From fred at mentalwarp.com Wed Apr 19 21:04:53 2006 From: fred at mentalwarp.com (FredericVDE) Date: Wed, 19 Apr 2006 21:04:53 -0000 Subject: [Bug 37472] Re: the keyboard don't work perfectly on laptops acer travelmate 2300 series with Dapper References: <20060331122206.23707.692.malonedeb@gandwana.ubuntu.com> Message-ID: <20060419210453.8468.52558.malone@gandwana.ubuntu.com> i also have this bug with an acer aspire 1500. (lost and stuck keys) it broke maybe one or two week ago. It was fine before (on dapper) -- the keyboard don't work perfectly on laptops acer travelmate 2300 series with Dapper https://launchpad.net/bugs/37472 From fred at mentalwarp.com Wed Apr 19 21:05:56 2006 From: fred at mentalwarp.com (FredericVDE) Date: Wed, 19 Apr 2006 21:05:56 -0000 Subject: [Bug 37472] Re: the keyboard don't work perfectly on laptops acer travelmate 2300 series with Dapper References: <20060331122206.23707.692.malonedeb@gandwana.ubuntu.com> Message-ID: <20060419210557.21557.26180.malone@gangotri.ubuntu.com> i also have this bug with an acer aspire 1500. (lost and stuck keys) it broke maybe one or two week ago. It was fine before (on dapper) -- the keyboard don't work perfectly on laptops acer travelmate 2300 series with Dapper https://launchpad.net/bugs/37472 From mark at hanoverbeacon.org Wed Apr 19 21:37:07 2006 From: mark at hanoverbeacon.org (markginter24) Date: Wed, 19 Apr 2006 21:37:07 -0000 Subject: [Bug 27888] Re: [DAPPER] ndiswrapper not working with kernel 2.6.15 (AMD64) References: <20060113151945.29386.46469.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060419213707.21557.99945.malone@gangotri.ubuntu.com> I have a PIII 1.2 Compaq Evo n600c and a Belkin (Broadcom 43xx based) pcmcia card. I get the exact same result when loading the ndiswrapper with the card inserted. Otherwise ndiswrapper loads and unloads without error. -- [DAPPER] ndiswrapper not working with kernel 2.6.15 (AMD64) https://launchpad.net/bugs/27888 From hramrach at centrum.cz Wed Apr 19 21:56:57 2006 From: hramrach at centrum.cz (Michal Suchanek) Date: Wed, 19 Apr 2006 21:56:57 -0000 Subject: [Bug 40243] Pressing power button hangs the system with 2.6.15-20-686 References: <20060419215657.21526.9792.malonedeb@gangotri.ubuntu.com> Message-ID: <20060419215657.21526.9792.malonedeb@gangotri.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: I tried the new kernel, and it hangs when I press the power button (instead of powering down). I am not sure what exactly locks up. Sometimes I am still able to log in on the console but X does not work anymore. And I cannot shutdown nor reboot the system. It used to work with the hoary and breezy kernel, and with 2.6.15-1-686 ** Attachment added: "dmidecode output" http://librarian.launchpad.net/2210741/fridge-dmi ** Attachment added: "/var/log/dmesg" http://librarian.launchpad.net/2210742/fridge-dmesg -- Pressing power button hangs the system with 2.6.15-20-686 https://launchpad.net/bugs/40243 From mpatters at cs.uwaterloo.ca Wed Apr 19 22:24:49 2006 From: mpatters at cs.uwaterloo.ca (Mike Patterson) Date: Wed, 19 Apr 2006 22:24:49 -0000 Subject: [Bug 37430] Re: Crash during breezy->dapper upgrade References: <20060331041215.23707.99296.malonedeb@gandwana.ubuntu.com> Message-ID: <20060419222449.21526.10392.malone@gangotri.ubuntu.com> Worked just ducky for me on the same hardware that was crashing last week (albeit with the -386 kernel on a fresh install), so maybe this issue has been fixed (at least for my hardware). I'll continue experimenting with different kernel versions. -- Crash during breezy->dapper upgrade https://launchpad.net/bugs/37430 From kubuntu at flavor8.com Wed Apr 19 23:26:32 2006 From: kubuntu at flavor8.com (Reuben Firmin) Date: Wed, 19 Apr 2006 23:26:32 -0000 Subject: [Bug 36849] Re: initrd creation error ignored => unbootable system References: <20060327135223.6279.11012.malonedeb@gandwana.ubuntu.com> Message-ID: <20060419232632.8495.44054.malone@gandwana.ubuntu.com> I had a very similar problem. dist-upgrade, failed somewhere during the setup of updates (before the initrd was setup), but no error message was surfaced by synaptic (and presumably therefore by dpkg). On reboot, I had a dead system (can't find root drive); I logged in using an older kernel and got a basically functional shell (although many things were not working, e.g. network, because of the many things that hadn't yet been configured) and ran update-initramfs on the new kernel. Once that was done I was able to reboot and get X up, and get back into synaptic. It told me there was a broken package (some braille thing) which I just removed; and it was only at this point that I realized that dpkg had work left to do (it picked right up where it had left off, and configured the rest of everything). The cause of the failure was that my /var partition was full, as above. -- initrd creation error ignored => unbootable system https://launchpad.net/bugs/36849 From jorge at whiprush.org Thu Apr 20 00:24:08 2006 From: jorge at whiprush.org (Jorge Castro) Date: Thu, 20 Apr 2006 00:24:08 -0000 Subject: [Bug 32123] Re: initramfs not generated correctly on upgrade to Dapper References: <20060220130413.1427.33476.malonedeb@gangotri.ubuntu.com> Message-ID: <20060420002409.21557.13015.launchpad@gangotri.ubuntu.com> ** Attachment added: "initrd.img-2.6.15-20-686" http://librarian.launchpad.net/2210834/initrd.img-2.6.15-20-686 -- initramfs not generated correctly on upgrade to Dapper https://launchpad.net/bugs/32123 From jorge at whiprush.org Thu Apr 20 00:31:38 2006 From: jorge at whiprush.org (Jorge Castro) Date: Thu, 20 Apr 2006 00:31:38 -0000 Subject: [Bug 32123] Re: initramfs not generated correctly on upgrade to Dapper References: <20060220130413.1427.33476.malonedeb@gangotri.ubuntu.com> Message-ID: <20060420003138.21557.77013.malone@gangotri.ubuntu.com> To clarify, I upgraded to dapper from breezy using the mvo's new dist- upgrader tool. I experienced the same problem as everyone else, so I booted into my breezy kernel and ran dpkg-reconfigure linux- image-2.6.15-20-686. Same problem, so I attached my initrd. It's my test box so I am just leaving it, if you need anything else from it just let me know. -- initramfs not generated correctly on upgrade to Dapper https://launchpad.net/bugs/32123 From pd at cipherfunk.org Thu Apr 20 01:16:02 2006 From: pd at cipherfunk.org (Paul Drain) Date: Thu, 20 Apr 2006 01:16:02 -0000 Subject: [Bug 39083] Re: Laptop Fans are disabled after Flight 6 Upgrade References: <20060411041242.32313.142.malonedeb@gandwana.ubuntu.com> Message-ID: <20060420011602.8468.15958.malone@gandwana.ubuntu.com> Could it also be an acpi-support issue? The fans in this particular machine are passively controlled and there's no BIOS functionality to change the temperature based control. ... because i've just had the same lockup appear after 4 hours with GDM sitting on the screen (ie. not being logged in, just powered up) -- Laptop Fans are disabled after Flight 6 Upgrade https://launchpad.net/bugs/39083 From alan.pater at gmail.com Thu Apr 20 02:02:41 2006 From: alan.pater at gmail.com (Alan Pater) Date: Thu, 20 Apr 2006 02:02:41 -0000 Subject: [Bug 37672] Re: Resume from sleep fails for HP compaq nw8000 laptop References: <20060402020055.5441.30762.malonedeb@gangotri.ubuntu.com> Message-ID: <20060420020241.21526.45291.malone@gangotri.ubuntu.com> Does kernel release mean 2.6.16 (dapper+1?) or 2.6.15-21 in Dapper? My current kernel is 2.6.15-20-686. Currently, things are already looking better. The laptop now resumes, but the screen remains blank, though the backlight is on. I was able to ssh into the laptop over the wireless network connection, after resume. I could not find the magic command line to resume the screen, however. Apart from recent upgrades within Dapper, I have disabled the SD card slot in the laptop's bios, as it remains unsupported in the kernel. -- Resume from sleep fails for HP compaq nw8000 laptop https://launchpad.net/bugs/37672 From jorge at whiprush.org Thu Apr 20 02:20:28 2006 From: jorge at whiprush.org (Jorge Castro) Date: Thu, 20 Apr 2006 02:20:28 -0000 Subject: [Bug 32123] Re: initramfs not generated correctly on upgrade to Dapper References: <20060220130413.1427.33476.malonedeb@gangotri.ubuntu.com> Message-ID: <20060420022028.8468.74316.malone@gandwana.ubuntu.com> infinity has confirmed that this is not the problem I am facing, disregard please. :) -- initramfs not generated correctly on upgrade to Dapper https://launchpad.net/bugs/32123 From ramon at cambridgelaan.nl Thu Apr 20 02:32:26 2006 From: ramon at cambridgelaan.nl (Ramon Hollands) Date: Thu, 20 Apr 2006 02:32:26 -0000 Subject: [Bug 40253] hibernate, sleep does not work References: <20060420004855.21526.1939.malonedeb@gangotri.ubuntu.com> Message-ID: <20060420023226.8468.24217.launchpad@canonical@gandwana.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: Shutting down seems to go well, but when I start my computer after a hibernate, it gets stuck. It freezes somewhere when the graphic thing is coming up, and shows a black screen with a green area on the upper half of the screen. The computer doesn't respond to anything at that point ( like ctrl, alt F* , etc ). I'm running the following system: Dell inspirion 6000 Celleron processor Ati mobility X300 video card The rest is not interesting I guess. Furthermore, after a sleep. The system doesn;t wake anymore... -- hibernate, sleep does not work https://launchpad.net/bugs/40253 From robitaille at gmail.com Thu Apr 20 02:32:25 2006 From: robitaille at gmail.com (Daniel Robitaille) Date: Thu, 20 Apr 2006 02:32:25 -0000 Subject: [Bug 40253] Re: hibernate, sleep does not work References: <20060420004855.21526.1939.malonedeb@gangotri.ubuntu.com> Message-ID: <20060420023226.8468.4861.launchpad@gandwana.ubuntu.com> ** Changed in: Ubuntu Sourcepackagename: None => linux-source-2.6.15 -- hibernate, sleep does not work https://launchpad.net/bugs/40253 From ryanmbruce at gmail.com Thu Apr 20 03:59:09 2006 From: ryanmbruce at gmail.com (ryanmbruce) Date: Thu, 20 Apr 2006 03:59:09 -0000 Subject: [Bug 35492] Re: "Cannot enable port 1. Maybe the USB cable is bad?" with usb mouse on toshiba laptop References: <20060318190809.26236.8241.malonedeb@gangotri.ubuntu.com> Message-ID: <20060420035909.21557.22661.malone@gangotri.ubuntu.com> What can I do to get more information on the problem? -- "Cannot enable port 1. Maybe the USB cable is bad?" with usb mouse on toshiba laptop https://launchpad.net/bugs/35492 From ikezoe at good-day.co.jp Thu Apr 20 05:16:11 2006 From: ikezoe at good-day.co.jp (Hiroyuki Ikezoe) Date: Thu, 20 Apr 2006 05:16:11 -0000 Subject: [Bug 33855] Re: A new Panasonic ACPI driver is required for kernel-2.6.15 References: <20060306024325.22115.48779.malonedeb@gandwana.ubuntu.com> Message-ID: <20060420051611.8468.19940.malone@gandwana.ubuntu.com> Sorry for the delay. Kernel 2.6.15-20 works fine except volume-up/down and mute hot key. And these keys works with Ted's modification for acpi-support in BUG#16424. -- A new Panasonic ACPI driver is required for kernel-2.6.15 https://launchpad.net/bugs/33855 From zzking at free.fr Thu Apr 20 06:51:53 2006 From: zzking at free.fr (gerard) Date: Thu, 20 Apr 2006 06:51:53 -0000 Subject: [Bug 28833] Re: Dapper 3: problem w/ USB devices References: <20060117223914.20195.11185.malonedeb@gandwana.ubuntu.com> Message-ID: <20060420065153.8495.39879.malone@gandwana.ubuntu.com> same w/ yesterday's update (April 19th) -- Dapper 3: problem w/ USB devices https://launchpad.net/bugs/28833 From sitsofe at yahoo.com Thu Apr 20 07:06:22 2006 From: sitsofe at yahoo.com (Sitsofe Wheeler) Date: Thu, 20 Apr 2006 07:06:22 -0000 Subject: [Bug 40220] Re: linux-image-2.6.15-12-386 kernel have problems with my sound card References: <20060419204151.21526.71142.malonedeb@gangotri.ubuntu.com> Message-ID: <20060420070622.8468.99531.malone@gandwana.ubuntu.com> Can you update your installation of dapper and check whether the symptoms are persisting with a 2.6.15-20 kernel? -- linux-image-2.6.15-12-386 kernel have problems with my sound card https://launchpad.net/bugs/40220 From charles at ubuntu.com Thu Apr 20 08:05:28 2006 From: charles at ubuntu.com (Charles Majola) Date: Thu, 20 Apr 2006 08:05:28 -0000 Subject: [Bug 40282] scp transfer couses system to freeze References: <20060420080529.8495.88291.malonedeb@gandwana.ubuntu.com> Message-ID: <20060420080529.8495.88291.malonedeb@gandwana.ubuntu.com> Public bug reported: Affects: linux-meta linux-image-2.6-386 (Ubuntu) Severity: Critical Priority: (none set) Status: Unconfirmed Description: I have just installed Dapper Beta on a HP 6120 with PV HT 3.0 GHz. When I try to copy a file from our server the entire system freezes and nothing responds, the only way to use it again is to press the reset button. This happens on both -386 and -686 kernels and this is a fresh install. I tried debugging methods, there doesn't seem to be any kernel oops or anything. The command used : #> sudo scp charles at 10.0.0.2:/home/backup/data-files.tar.gz . as soon as this runs, the system freezes. I'll be happy to help debug this ** Changed in: linux-meta linux-image-2.6-386 (Ubuntu) Severity: Normal => Critical -- scp transfer couses system to freeze https://launchpad.net/bugs/40282 From charles at ubuntu.com Thu Apr 20 08:09:07 2006 From: charles at ubuntu.com (Charles Majola) Date: Thu, 20 Apr 2006 08:09:07 -0000 Subject: [Bug 40282] Re: scp transfer couses system to freeze References: <20060420080529.8495.88291.malonedeb@gandwana.ubuntu.com> Message-ID: <20060420080907.21557.76939.malone@gangotri.ubuntu.com> correction: PV should be P4 with HyperThreading -- scp transfer couses system to freeze https://launchpad.net/bugs/40282 From fabbione at ubuntu.com Thu Apr 20 08:30:30 2006 From: fabbione at ubuntu.com (Fabio Massimo Di Nitto) Date: Thu, 20 Apr 2006 08:30:30 -0000 Subject: [Bug 40286] [ia64] OOPS when accessing /sys/class/misc/efirtc/uvent References: <20060420083030.8468.20650.malonedeb@gandwana.ubuntu.com> Message-ID: <20060420083030.8468.20650.malonedeb@gandwana.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 linux-image-2.6.15-20-itanium-smp (Ubuntu) Severity: Major Priority: (none set) Assignee: LaMont Jones Status: Unconfirmed Description: Unable to handle kernel paging request at virtual address 0000000700000000 sh[6236]: Oops 11012296146944 [4] Modules linked in: efivars xfs exportfs reiserfs jfs ext3 jbd vfat fat ext2 e1000 usbserial usbhid usbkbd ehci_hcd ohcv Pid: 6236, CPU 0, comm: sh psr : 00001210085a6010 ifs : 800000000000048c ip : [] Not tainted ip is at sysfs_open_file+0x271/0x740 unat: 0000000000000000 pfs : 000000000000048c rsc : 0000000000000003 rnat: 0000000000000000 bsps: 0000000000000000 pr : 000000000001a959 ldrs: 0000000000000000 ccv : 0000000000000000 fpsr: 0009804c0270033f csd : 0000000000000000 ssd : 0000000000000000 b0 : a000000100204610 b6 : a0000001000091e0 b7 : a0000001002021c0 f6 : 1003e0000000000000000 f7 : 1003e0000000000000080 f8 : 1003e0000000000000013 f9 : 000000000000000000000 f10 : 000000000000000000000 f11 : 000000000000000000000 r1 : a00000010090d6d0 r2 : e0000040fd757c34 r3 : e000000102be67f8 r8 : e0000040fdc64350 r9 : 0000000000000002 r10 : e0000040fdc70718 r11 : e0000040fd757cc8 r12 : e0000040f9727db0 r13 : e0000040f9720000 r14 : 0000000000000000 r15 : e0000040fdc706e8 r16 : 0000000700000000 r17 : e0000040fdc643c0 r18 : e0000040fdc70710 r19 : e0000040fdc706c8 r20 : e0000040fdc706a0 r21 : e000000102be6868 r22 : e000000102be67d0 r23 : a000000100204540 r24 : e0000040f9720d54 r25 : e0000040fdf7cf48 r26 : 0000000000000059 r27 : 0000000000000000 r28 : e0000040fea1cc10 r29 : a0000001000091e0 r30 : 0000000000000000 r31 : a00000010066fb80 Call Trace: [] show_stack+0x80/0xa0 sp=e0000040f9727930 bsp=e0000040f9721148 [] show_regs+0x900/0x940 sp=e0000040f9727b00 bsp=e0000040f97210f0 [] die+0x1b0/0x2a0 sp=e0000040f9727b10 bsp=e0000040f97210a8 [] ia64_do_page_fault+0xc40/0xce0 sp=e0000040f9727b30 bsp=e0000040f9721050 [] ia64_leave_kernel+0x0/0x280 sp=e0000040f9727be0 bsp=e0000040f9721050 [] sysfs_open_file+0x270/0x740 sp=e0000040f9727db0 bsp=e0000040f9720fe8 [] __dentry_open+0x450/0x600 sp=e0000040f9727dc0 bsp=e0000040f9720f70 [] nameidata_to_filp+0x90/0xc0 sp=e0000040f9727dc0 bsp=e0000040f9720f48 [] filp_open+0x90/0xc0 sp=e0000040f9727dc0 bsp=e0000040f9720f18 [] do_sys_open+0x80/0x1e0 sp=e0000040f9727e30 bsp=e0000040f9720ed0 [] sys_open+0x50/0x80 sp=e0000040f9727e30 bsp=e0000040f9720e78 [] ia64_ret_from_syscall+0x0/0x20 sp=e0000040f9727e30 bsp=e0000040f9720e78 [] __start_ivt_text+0xffffffff00010620/0x400 sp=e0000040f9728000 bsp=e0000040f9720e78 -- [ia64] OOPS when accessing /sys/class/misc/efirtc/uvent https://launchpad.net/bugs/40286 From fabbione at ubuntu.com Thu Apr 20 08:31:29 2006 From: fabbione at ubuntu.com (Fabio Massimo Di Nitto) Date: Thu, 20 Apr 2006 08:31:29 -0000 Subject: [Bug 40286] Re: [ia64] OOPS when accessing /sys/class/misc/efirtc/uvent References: <20060420083030.8468.20650.malonedeb@gandwana.ubuntu.com> Message-ID: <20060420083129.8468.508.malone@gandwana.ubuntu.com> Hey Ben and Lamont, the above makes impossible to install on my Itanium. Fabio ** Changed in: linux-source-2.6.15 linux-image-2.6.15-20-itanium-smp (Ubuntu) Severity: Normal => Major Assignee: (unassigned) => LaMont Jones -- [ia64] OOPS when accessing /sys/class/misc/efirtc/uvent https://launchpad.net/bugs/40286 From fabbione at ubuntu.com Thu Apr 20 08:40:19 2006 From: fabbione at ubuntu.com (Fabio Massimo Di Nitto) Date: Thu, 20 Apr 2006 08:40:19 -0000 Subject: [Bug 40291] Complete machine freeze References: <20060420084019.21557.8908.malonedeb@gangotri.ubuntu.com> Message-ID: <20060420084019.21557.8908.malonedeb@gangotri.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 linux-image-2.6.15-20-server-bigiron (Ubuntu) Severity: Major Priority: (none set) Status: Unconfirmed Description: Ben just for the sake of testing i did try booting -server-bigiron on a P4. It freezes "Uncompressing Linux... Ok, booting the kernel." Machine is dead. Fabio ** Changed in: linux-source-2.6.15 linux-image-2.6.15-20-server-bigiron (Ubuntu) Severity: Normal => Major -- Complete machine freeze https://launchpad.net/bugs/40291 From mikko.lipasti at polarcom.fi Thu Apr 20 08:56:46 2006 From: mikko.lipasti at polarcom.fi (pasti) Date: Thu, 20 Apr 2006 08:56:46 -0000 Subject: [Bug 40294] No sound, no networking (IRQ 11) (WORKAROUND) References: <20060420085646.8468.15311.malonedeb@gandwana.ubuntu.com> Message-ID: <20060420085646.8468.15311.malonedeb@gandwana.ubuntu.com> Public bug reported: Affects: linux-source-2.6.12 linux-image-2.6.12-9-386 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: Environment: IBM ThinkPad X30 laptop, fresh Breezy install Symptoms: No networking (wired or wireless, static or dhcp), audio stops working shortly after boot Workaround: boot with irqpoll option ** Attachment added: "lspci -vv output" http://librarian.launchpad.net/2233108/lspcivv.txt ** Summary changed: - No sound, no networking (IRQ 11) (WORKAROUND) + IBM X30 / Breezy: No sound, no networking (WORKAROUND) -- IBM X30 / Breezy: No sound, no networking (WORKAROUND) https://launchpad.net/bugs/40294 From charles at ubuntu.com Thu Apr 20 09:03:00 2006 From: charles at ubuntu.com (Charles Majola) Date: Thu, 20 Apr 2006 09:03:00 -0000 Subject: [Bug 40282] Re: scp transfer couses system to freeze References: <20060420080529.8495.88291.malonedeb@gandwana.ubuntu.com> Message-ID: <20060420090300.21557.90048.launchpad@gangotri.ubuntu.com> ** Attachment added: "dmesg output" http://librarian.launchpad.net/2233110/dmesg.txt ** Attachment added: "lspci" http://librarian.launchpad.net/2233111/lspci.txt -- scp transfer couses system to freeze https://launchpad.net/bugs/40282 From mikko.lipasti at polarcom.fi Thu Apr 20 09:05:40 2006 From: mikko.lipasti at polarcom.fi (pasti) Date: Thu, 20 Apr 2006 09:05:40 -0000 Subject: [Bug 24047] Re: No networking with Intel PRO/100 nor with Cisco Airo References: <20060113142703.21012.54209.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060420090540.8468.80046.malone@gandwana.ubuntu.com> Hello, I ran into similar problems myself on IBM X30. I found a workaround though: try booting with irqpoll -option (e.g. boot: Linux irqpoll) I filed a bug report about this under the kernel package I'm running (Breezy) (#40294) Hope this helps! - Mikko -- No networking with Intel PRO/100 nor with Cisco Airo https://launchpad.net/bugs/24047 From rolf.offermanns at gmx.net Thu Apr 20 10:02:27 2006 From: rolf.offermanns at gmx.net (Rolf Offermanns) Date: Thu, 20 Apr 2006 10:02:27 -0000 Subject: [Bug 40304] Re: sky2 driver in 2.6.15-20 crashes on load, works in 2.6.15-19 References: <20060420095831.8495.36381.malonedeb@gandwana.ubuntu.com> Message-ID: <20060420100227.8468.58027.malone@gandwana.ubuntu.com> The system is a MAXDATA server MPL 3200 I M5. The mainboard is an Intel SE7520BD2V with a XEON 2.8G CPU. The marvel chip is onboard. -- sky2 driver in 2.6.15-20 crashes on load, works in 2.6.15-19 https://launchpad.net/bugs/40304 From rolf.offermanns at gmx.net Thu Apr 20 09:58:31 2006 From: rolf.offermanns at gmx.net (Rolf Offermanns) Date: Thu, 20 Apr 2006 09:58:31 -0000 Subject: [Bug 40304] sky2 driver in 2.6.15-20 crashes on load, works in 2.6.15-19 References: <20060420095831.8495.36381.malonedeb@gandwana.ubuntu.com> Message-ID: <20060420095831.8495.36381.malonedeb@gandwana.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: The sky2 driver got updated from v0.11 in 2.6.15-19 to v1.1 in 2.6.15-20. Not I get a null pointer exception during system boot every time. I will attach the OOPS msg. in a seperate attachment. ** Attachment added: "oops log" http://librarian.launchpad.net/2233198/sky2-oops.txt -- sky2 driver in 2.6.15-20 crashes on load, works in 2.6.15-19 https://launchpad.net/bugs/40304 From sheepiedog at go.com Thu Apr 20 12:13:38 2006 From: sheepiedog at go.com (rick) Date: Thu, 20 Apr 2006 12:13:38 -0000 Subject: [Bug 33230] Re: sky2 hangs on large data transfers (upstream fix available) References: <20060301081029.22115.81038.malonedeb@gandwana.ubuntu.com> Message-ID: <20060420121338.21526.70813.malone@gangotri.ubuntu.com> My card (Marvell Technology Group Ltd. 88E8036 PCI-E Fast Ethernet Controller (rev 10)) hangs with the sky2 driver in 2.6.15-20-686 (and 386) ubuntu kernels too. Sky2 on vairous kernels has always made my card hang once given a modest load. Listening to an mp3 stream seems ok but once download speeds get over 100-200kb/s, things stop. This isn't acceptable for a gigabit card. Upstream fixes haven't helped me either (as of mm-sources-2.6.17-rc1-mm3 on gentoo but I've tried various other vanilla and mm kernels). The sk98lin driver provided by syskonnect.de works fine on kernels up to 2.6.15, either patched into the kernel or built separately. On 2.6.16 and 2.6.17 kernels, things are a little tricky. The driver cannot be built separately but it can be patched into the kernel. Once the syskonnect patch is applied, the patch at http://www.ussg.iu.edu/hypermail/linux/kernel/0602.1/1630.html is needed before compiling, due to a few changes in the 2.6.16 kernel. -- sky2 hangs on large data transfers (upstream fix available) https://launchpad.net/bugs/33230 From bluekuja at gmail.com Thu Apr 20 12:30:51 2006 From: bluekuja at gmail.com (Andrea Veri) Date: Thu, 20 Apr 2006 12:30:51 -0000 Subject: [Bug 40220] Re: linux-image-2.6.15-12-386 kernel have problems with my sound card References: <20060419204151.21526.71142.malonedeb@gangotri.ubuntu.com> Message-ID: <20060420123051.8495.45905.malone@gandwana.ubuntu.com> ok then .I'll update my kernel to see if i get this problem, soon more results. -- linux-image-2.6.15-12-386 kernel have problems with my sound card https://launchpad.net/bugs/40220 From me at davidandrewtaylor.co.uk Thu Apr 20 12:40:50 2006 From: me at davidandrewtaylor.co.uk (David Taylor) Date: Thu, 20 Apr 2006 12:40:50 -0000 Subject: [Bug 40319] ndiswrapper no longer works with SafeCom SWLP-5408 in Dapper References: <20060420124050.21557.81411.malonedeb@gangotri.ubuntu.com> Message-ID: <20060420124050.21557.81411.malonedeb@gangotri.ubuntu.com> Public bug reported: Affects: ndiswrapper (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: Ndiswrapper no longer works with SafeCom SWLP-5408 in Dapper. Works in breezy AOK with the drivers suggested on the Ndiswrapper website. -- ndiswrapper no longer works with SafeCom SWLP-5408 in Dapper https://launchpad.net/bugs/40319 From alberto.botti at yoda2000.net Thu Apr 20 13:31:22 2006 From: alberto.botti at yoda2000.net (ath) Date: Thu, 20 Apr 2006 13:31:22 -0000 Subject: [Bug 31527] Re: DRI locks up the machine when starting X on a Radeon 9250 References: <20060215163856.15884.24165.malonedeb@gangotri.ubuntu.com> Message-ID: <20060420133122.21557.16975.launchpad@gangotri.ubuntu.com> ** Changed in: linux-meta linux-image-2.6-k7 (Ubuntu) Status: Unconfirmed => Confirmed -- DRI locks up the machine when starting X on a Radeon 9250 https://launchpad.net/bugs/31527 From kubuntu at flavor8.com Thu Apr 20 13:57:45 2006 From: kubuntu at flavor8.com (Reuben Firmin) Date: Thu, 20 Apr 2006 13:57:45 -0000 Subject: [Bug 32123] Re: initramfs not generated correctly on upgrade to Dapper References: <20060220130413.1427.33476.malonedeb@gangotri.ubuntu.com> Message-ID: <20060420135745.8495.68161.malone@gandwana.ubuntu.com> This also happened to me; in my case, the /var partition filled up during the configuration step of my apt upgrade, and dpkg failed on some early configuration (meaning that everything else, including the initramfs package, was not configured.) The crucial problem is that dpkg/apt/synaptic does NOT report the correct issue ("/var is full - your system is in an invalid state; please do..."); it just says "could not configure this dumb braille package that you're never going to want to use anyway". When I rebooted, the new kernel did not work, and other kernels were only basically functional (because many things were in an unconfigured state; so, X did not work, network was down, usb devices didn't work, etc etc). I got out of it by running update-initramfs on the new kernel; when I rebooted again, this got me into X, and it was only then that I discovered that /var was full, and that there was a bunch of dpkg configuring that still needed to be done. Used synaptic to clear some of apt's cache to create space, and all was good. I reproduced the exact problem on my ibook, which was much more hairy, since in that case *neither* of the kernels worked (yaboot is much less than grub, in terms of features) and for the longest time I could not figure out how to eject the cd drive to boot from a live cd (since the eject button is handled via software which loads after the kernel). For a while, I thought I had a paperweight on my hands (until I discovered the "paperclip trick" for opening the ibook's cd drive, thanks to a pointer from the ubuntuforums). This is a potentially big problem...the fix should be made in breezy well prior to dapper's release. -- initramfs not generated correctly on upgrade to Dapper https://launchpad.net/bugs/32123 From kubuntu at flavor8.com Thu Apr 20 13:58:13 2006 From: kubuntu at flavor8.com (Reuben Firmin) Date: Thu, 20 Apr 2006 13:58:13 -0000 Subject: [Bug 32123] Re: initramfs not generated correctly on upgrade to Dapper References: <20060220130413.1427.33476.malonedeb@gangotri.ubuntu.com> Message-ID: <20060420135813.8495.79867.malone@gandwana.ubuntu.com> See also bug: 36849, which is similar if not identical. -- initramfs not generated correctly on upgrade to Dapper https://launchpad.net/bugs/32123 From surak at surak.eti.br Thu Apr 20 14:38:27 2006 From: surak at surak.eti.br (Alexandre Otto Strube) Date: Thu, 20 Apr 2006 14:38:27 -0000 Subject: [Bug 29374] Re: Unknown Crash or Kernel Panic in Gnome with smp system. References: <20060122180445.15826.35472.malonedeb@gandwana.ubuntu.com> Message-ID: <20060420143827.21557.23770.malone@gangotri.ubuntu.com> David, you said that this machine ran gentoo fine. Do you still have access to this gentoo? Can you try to dual-boot them between the latest dapper and latest gentoo? People say that this is hardware-caused. Perhaps your machine just become defective about the same time you installed ubuntu. As a suggestion, can you try to compile gentoo's kernel on ubuntu and see what it happens, so we can know for sure it is ubuntu the culprit? -- Unknown Crash or Kernel Panic in Gnome with smp system. https://launchpad.net/bugs/29374 From rkimber at ntlworld.com Thu Apr 20 14:58:39 2006 From: rkimber at ntlworld.com (Rkimber) Date: Thu, 20 Apr 2006 14:58:39 -0000 Subject: [Bug 27190] Re: general protection fault References: <20060113145321.21012.84801.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060420145839.21557.55290.malone@gangotri.ubuntu.com> I've now managed to install Dapper flight 6, and I'm getting:- Apr 20 14:46:25 infinity kernel: [61154.088378] general protection fault: 0000 [3] PREEMPT SMP Apr 20 14:46:25 infinity kernel: [61154.088388] CPU 0 Apr 20 14:46:25 infinity kernel: [61154.088391] Modules linked in: binfmt_misc ipt_limit iptable_mangle ipt_LOG ipt_MASQUERADE ip_nat ipt_TOS ipt_REJECT ip_conntrack_irc ip_conntrack_ftp ipt_state ip_conntrack nfnetlink iptable_filter ip_tables video tc1100_wmi sony_acpi pcc_acpi hotkey dev_acpi container button acpi_sbs battery ac i2c_acpi_ec nls_iso8859_1 nls_cp437 vfat fat ipv6 dm_mod md_mod w83627hf hwmon_vid eeprom i2c_isa lp snd_seq_dummy snd_seq_oss snd_seq_midi snd_seq_midi_event snd_seq tsdev psmouse serio_raw pcspkr snd_via82xx parport_pc parport rtc gameport nvidia snd_ac97_codec snd_ac97_bus snd_pcm_oss snd_mixer_oss snd_pcm snd_timer snd_page_alloc snd_mpu401_uart snd_rawmidi snd_seq_device shpchp pci_hotplug snd i2c_viapro i2c_core soundcore tg3 sg sd_mod evdev ext3 jbd ide_generic usb_storage scsi_mod uhci_hcd ehci_hcd usbcore ide_disk via82cxxx generic ide_cd cdrom pdc202xx_new thermal processor fan capability commoncap vga16fb cfbcopyarea vgastate cfbimgblt cfbfillrect fbcon tileblit font bitblit Apr 20 14:46:25 infinity kernel: softcursor Apr 20 14:46:25 infinity kernel: [61154.088447] Pid: 22698, comm: formail Tainted: P 2.6.15-20-amd64-generic #1 Apr 20 14:46:25 infinity kernel: [61154.088452] RIP: 0010:[do_execve+681/688] {do_execve+681} Apr 20 14:46:25 infinity kernel: [61154.088468] RSP: 0018:ffff81002d1f7f20 EFLAGS: 00010292 Apr 20 14:46:25 infinity kernel: [61154.088473] RAX: 0000000000000000 RBX: ffff81002d23d000 RCX: 000000000000001b Apr 20 14:46:25 infinity kernel: [61154.088478] RDX: ffff810069760a00 RSI: ffff810001000000 RDI: ffff810069760a00 Apr 20 14:46:25 infinity kernel: [61154.088482] RBP: 0000000000519830 R08: 00007fffffbab389 R09: 0000000000000000 Apr 20 14:46:25 infinity kernel: [61154.088486] R10: 0000000000000000 R11: 000000000000000f R12: 00e4dbcf00e4dbcf Apr 20 14:46:25 infinity kernel: [61154.088491] R13: 00e4dbcf00e4dbcf R14: 00e4dbcf00e4dbcf R15: 00e4dbcf00e4dbcf Apr 20 14:46:25 infinity kernel: [61154.088496] FS: 00002aaaaaf806d0(0000) GS:ffffffff80446800(0000) knlGS:0000000000000000 Apr 20 14:46:25 infinity kernel: [61154.088500] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b Apr 20 14:46:25 infinity kernel: [61154.088504] CR2: 00007fffffbab389 CR3: 000000002db17000 CR4: 00000000000006e0 Apr 20 14:46:25 infinity kernel: [61154.088509] Process formail (pid: 22698, threadinfo ffff81002d1f6000, task ffff81002d5f9560) Apr 20 14:46:25 infinity kernel: [61154.088512] Stack: 00e4dbcf00e4dbcf 00e4dbcf00e4dbcf 00e4dbcf00e4dbcf 00e4dbcf00e4dbcf Apr 20 14:46:25 infinity kernel: [61154.088521] 0000000000517390 00000000005173cd ffffffff801102fe 0000000000000000 Apr 20 14:46:25 infinity kernel: [61154.088527] 0000000000000000 0000000000000000 Apr 20 14:46:25 infinity kernel: [61154.088531] Call Trace:{stub_execve+106} Apr 20 14:46:25 infinity kernel: [61154.088573] Apr 20 14:46:25 infinity kernel: [61154.088574] Code: c3 90 90 90 90 90 90 48 83 bf a0 01 00 00 00 48 8b 06 74 0a Apr 20 14:46:25 infinity kernel: [61154.088585] RIP {do_execve+681} RSP this is with 2.6.15-20-amd64-generic I also get other oopses, but it's not always clear which package is involved. Should I report these, and under what heading? -- general protection fault https://launchpad.net/bugs/27190 From Thyrus at lycos.de Thu Apr 20 15:02:49 2006 From: Thyrus at lycos.de (Christian Doczkal) Date: Thu, 20 Apr 2006 15:02:49 -0000 Subject: [Bug 38423] Re: suspend-resume-hibernate-resume fails something related to temperature References: <20060406142523.32233.80007.malonedeb@gandwana.ubuntu.com> Message-ID: <20060420150250.8495.47914.malone@gandwana.ubuntu.com> I have exactly the same Problem. Just updated to Dapper today (Kernel 2.6.15-20-386). For now the Problem only occured when resuming from Disk and is not reproduceable (Just tested again and Resume from Disk worked fine) My Laptop is an ASUS M6800N I'm not sure but I think that this happend sometime before using Breezy -- suspend-resume-hibernate-resume fails something related to temperature https://launchpad.net/bugs/38423 From mpatters at cs.uwaterloo.ca Thu Apr 20 15:27:43 2006 From: mpatters at cs.uwaterloo.ca (Mike Patterson) Date: Thu, 20 Apr 2006 15:27:43 -0000 Subject: [Bug 37430] Re: Crash during breezy->dapper upgrade References: <20060331041215.23707.99296.malonedeb@gandwana.ubuntu.com> Message-ID: <20060420152743.21557.3261.malone@gangotri.ubuntu.com> It appears to be confined to when I'm using the 686-smp kernel - it locked up again on the P5LD2 motherboard. You can see details here: https://www.cs.uwaterloo.ca/twiki/view/CF/BreezyToDapper although that twiki isn't editable by people outside of our department. There's some very brief notes there (intended to be supplemented with our non-public RT), along with kern.log files from the machine in question and also some crappy pictures I took with our digital camera - but they don't show much, nothing came up on screen when I did the sysrq except "SysRq: Show State". -- Crash during breezy->dapper upgrade https://launchpad.net/bugs/37430 From jamesmbaker at gmail.com Thu Apr 20 16:47:09 2006 From: jamesmbaker at gmail.com (rael9) Date: Thu, 20 Apr 2006 16:47:09 -0000 Subject: [Bug 40332] [dapper] Thinkpad R52 won't wake from sleep/hibernate References: <20060420135946.21557.63109.malonedeb@gangotri.ubuntu.com> Message-ID: <20060420164709.8495.13523.launchpad@canonical@gandwana.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Needs Info Description: When trying to wake my 'pad from sleep, it seems to mostly wake up, but the video is all garbled. It seems like the computer is functional, as I can usually hit Alt-Ctl-Del to make it shut down and reboot properly. I can't get the video to function properly without a reboot, though. Trying Alt-Ctl-F1 etc. doesn't switch to console. Here is my lspci: 0000:00:00.0 Host bridge: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller (rev 03) 0000:00:01.0 PCI bridge: Intel Corporation Mobile 915GM/PM Express PCI Express Root Port (rev 03) 0000:00:1c.0 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 (rev 03) 0000:00:1c.2 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 3 (rev 03) 0000:00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 03) 0000:00:1d.1 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 03) 0000:00:1d.2 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 03) 0000:00:1d.3 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 (rev 03) 0000:00:1d.7 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 03) 0000:00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev d3) 0000:00:1e.2 Multimedia audio controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Audio Controller (rev 03) 0000:00:1e.3 Modem: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Modem Controller (rev 03) 0000:00:1f.0 ISA bridge: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge (rev 03) 0000:00:1f.2 IDE interface: Intel Corporation 82801FBM (ICH6M) SATA Controller (rev 03) 0000:00:1f.3 SMBus: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller (rev 03) 0000:01:00.0 VGA compatible controller: ATI Technologies Inc M22 [Radeon Mobility M300] 0000:02:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5751M Gigabit Ethernet PCI Express (rev 11) 0000:04:00.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev b3) 0000:04:00.1 FireWire (IEEE 1394): Ricoh Co Ltd R5C552 IEEE 1394 Controller (rev 08) 0000:04:02.0 Network controller: Intel Corporation PRO/Wireless 2915ABG MiniPCI Adapter (rev 05) And here is my dmidecode: # dmidecode 2.7 SMBIOS 2.33 present. 64 structures occupying 2086 bytes. Table at 0x000E0010. Handle 0x0000, DMI type 0, 20 bytes. BIOS Information Vendor: IBM Version: 76ET63WW (1.23 ) Release Date: 02/14/2006 Address: 0xDC000 Runtime Size: 144 kB ROM Size: 1024 kB Characteristics: PCI is supported PC Card (PCMCIA) is supported PNP is supported APM is supported BIOS is upgradeable BIOS shadowing is allowed ESCD support is available Boot from CD is supported Selectable boot is supported EDD is supported 3.5"/720 KB floppy services are supported (int 13h) Print screen service is supported (int 5h) 8042 keyboard services are supported (int 9h) Serial services are supported (int 14h) Printer services are supported (int 17h) CGA/mono video services are supported (int 10h) ACPI is supported USB legacy is supported BIOS boot specification is supported Handle 0x0001, DMI type 1, 25 bytes. System Information Manufacturer: IBM Product Name: 18494WU Version: ThinkPad R52 Serial Number: LVN5239 UUID: FCBDF420-1468-11DA-952B-87E252858CA3 Wake-up Type: Power Switch Handle 0x0002, DMI type 2, 8 bytes. Base Board Information Manufacturer: IBM Product Name: 18494WU Version: Not Available Serial Number: 1ZAHE58N2KS Handle 0x0003, DMI type 3, 17 bytes. Chassis Information Manufacturer: IBM Type: Notebook Lock: Not Present Version: Not Available Serial Number: Not Available Asset Tag: No Asset Information Boot-up State: Unknown Power Supply State: Unknown Thermal State: Unknown Security Status: Unknown OEM Information: 0x00000000 Handle 0x0004, DMI type 126, 17 bytes. Inactive Handle 0x0005, DMI type 126, 17 bytes. Inactive Handle 0x0006, DMI type 4, 35 bytes. Processor Information Socket Designation: None Type: Central Processor Family: Pentium M Manufacturer: GenuineIntel ID: D8 06 00 00 FF FB E9 AF Signature: Type 0, Family 6, Model 13, Stepping 8 Flags: FPU (Floating-point unit on-chip) VME (Virtual mode extension) DE (Debugging extension) PSE (Page size extension) TSC (Time stamp counter) MSR (Model specific registers) PAE (Physical address extension) MCE (Machine check exception) CX8 (CMPXCHG8 instruction supported) APIC (On-chip APIC hardware supported) SEP (Fast system call) MTRR (Memory type range registers) PGE (Page global enable) MCA (Machine check architecture) CMOV (Conditional move instruction supported) PAT (Page attribute table) CLFSH (CLFLUSH instruction supported) DS (Debug store) ACPI (ACPI supported) MMX (MMX technology supported) FXSR (Fast floating-point save and restore) SSE (Streaming SIMD extensions) SSE2 (Streaming SIMD extensions 2) SS (Self-snoop) TM (Thermal monitor supported) PBE (Pending break enabled) Version: Intel(R) Pentium(R) M processor Voltage: 1.3 V External Clock: 533 MHz Max Speed: 1866 MHz Current Speed: 1866 MHz Status: Populated, Enabled Upgrade: None L1 Cache Handle: 0x000A L2 Cache Handle: 0x000B L3 Cache Handle: Not Provided Serial Number: Not Specified Asset Tag: Not Specified Part Number: Not Specified Handle 0x0007, DMI type 5, 20 bytes. Memory Controller Information Error Detecting Method: None Error Correcting Capabilities: None Supported Interleave: One-way Interleave Current Interleave: One-way Interleave Maximum Memory Module Size: 1024 MB Maximum Total Memory Size: 2048 MB Supported Speeds: Other Supported Memory Types: DIMM SDRAM Memory Module Voltage: 2.9 V Associated Memory Slots: 2 0x0008 0x0009 Enabled Error Correcting Capabilities: Unknown Handle 0x0008, DMI type 6, 12 bytes. Memory Module Information Socket Designation: DIMM Slot 1 Bank Connections: 0 3 Current Speed: Unknown Type: DIMM SDRAM Installed Size: 512 MB (Double-bank Connection) Enabled Size: 512 MB (Double-bank Connection) Error Status: OK Handle 0x0009, DMI type 6, 12 bytes. Memory Module Information Socket Designation: DIMM Slot 2 Bank Connections: 4 7 Current Speed: Unknown Type: DIMM SDRAM Installed Size: 512 MB (Double-bank Connection) Enabled Size: 512 MB (Double-bank Connection) Error Status: OK Handle 0x000A, DMI type 7, 19 bytes. Cache Information Socket Designation: Internal L1 Cache Configuration: Enabled, Socketed, Level 1 Operational Mode: Write Back Location: Internal Installed Size: 32 KB Maximum Size: 32 KB Supported SRAM Types: Synchronous Installed SRAM Type: Synchronous Speed: Unknown Error Correction Type: Single-bit ECC System Type: Data Associativity: 8-way Set-associative Handle 0x000B, DMI type 7, 19 bytes. Cache Information Socket Designation: Internal L2 Cache Configuration: Enabled, Socketed, Level 2 Operational Mode: Write Back Location: Internal Installed Size: 2048 KB Maximum Size: 2048 KB Supported SRAM Types: Burst Installed SRAM Type: Burst Speed: Unknown Error Correction Type: Multi-bit ECC System Type: Unified Associativity: 8-way Set-associative Handle 0x000C, DMI type 126, 9 bytes. Inactive Handle 0x000D, DMI type 8, 9 bytes. Port Connector Information Internal Reference Designator: Not Available Internal Connector Type: None External Reference Designator: Infrared External Connector Type: Infrared Port Type: Other Handle 0x000E, DMI type 8, 9 bytes. Port Connector Information Internal Reference Designator: Not Available Internal Connector Type: None External Reference Designator: Parallel External Connector Type: DB-25 female Port Type: Parallel Port ECP/EPP Handle 0x000F, DMI type 8, 9 bytes. Port Connector Information Internal Reference Designator: Not Available Internal Connector Type: None External Reference Designator: External Monitor External Connector Type: DB-15 female Port Type: Video Port Handle 0x0010, DMI type 126, 9 bytes. Inactive Handle 0x0011, DMI type 126, 9 bytes. Inactive Handle 0x0012, DMI type 126, 9 bytes. Inactive Handle 0x0013, DMI type 126, 9 bytes. Inactive Handle 0x0014, DMI type 126, 9 bytes. Inactive Handle 0x0015, DMI type 8, 9 bytes. Port Connector Information Internal Reference Designator: Not Available Internal Connector Type: None External Reference Designator: Microphone Jack External Connector Type: Mini Jack (headphones) Port Type: Audio Port Handle 0x0016, DMI type 8, 9 bytes. Port Connector Information Internal Reference Designator: Not Available Internal Connector Type: None External Reference Designator: Headphone Jack External Connector Type: Mini Jack (headphones) Port Type: Audio Port Handle 0x0017, DMI type 8, 9 bytes. Port Connector Information Internal Reference Designator: Not Available Internal Connector Type: None External Reference Designator: S-Video-Out External Connector Type: Other Port Type: Video Port Handle 0x0018, DMI type 126, 9 bytes. Inactive Handle 0x0019, DMI type 8, 9 bytes. Port Connector Information Internal Reference Designator: Not Available Internal Connector Type: None External Reference Designator: Modem External Connector Type: RJ-11 Port Type: Modem Port Handle 0x001A, DMI type 8, 9 bytes. Port Connector Information Internal Reference Designator: Not Available Internal Connector Type: None External Reference Designator: Ethernet External Connector Type: RJ-45 Port Type: Network Port Handle 0x001B, DMI type 8, 9 bytes. Port Connector Information Internal Reference Designator: Not Available Internal Connector Type: None External Reference Designator: USB 1 External Connector Type: Access Bus (USB) Port Type: USB Handle 0x001C, DMI type 8, 9 bytes. Port Connector Information Internal Reference Designator: Not Available Internal Connector Type: None External Reference Designator: USB 2 External Connector Type: Access Bus (USB) Port Type: USB Handle 0x001D, DMI type 126, 9 bytes. Inactive Handle 0x001E, DMI type 126, 9 bytes. Inactive Handle 0x001F, DMI type 126, 9 bytes. Inactive Handle 0x0020, DMI type 126, 9 bytes. Inactive Handle 0x0021, DMI type 8, 9 bytes. Port Connector Information Internal Reference Designator: Not Available Internal Connector Type: None External Reference Designator: IEEE1394 External Connector Type: IEEE 1394 Port Type: Firewire (IEEE P1394) Handle 0x0022, DMI type 9, 13 bytes. System Slot Information Designation: CardBus Slot 1 Type: 32-bit PC Card (PCMCIA) Current Usage: Available Length: Other ID: Adapter 0, Socket 0 Characteristics: 5.0 V is provided 3.3 V is provided PC Card-16 is supported Cardbus is supported Zoom Video is supported Modem ring resume is supported PME signal is supported Hot-plug devices are supported Handle 0x0023, DMI type 126, 13 bytes. Inactive Handle 0x0024, DMI type 126, 13 bytes. Inactive Handle 0x0025, DMI type 126, 13 bytes. Inactive Handle 0x0026, DMI type 9, 13 bytes. System Slot Information Designation: Mini-PCI Slot 1 Type: 32-bit PCI Current Usage: Available Length: Other ID: 1 Characteristics: 5.0 V is provided 3.3 V is provided PME signal is supported SMBus signal is supported Handle 0x0027, DMI type 126, 13 bytes. Inactive Handle 0x0028, DMI type 10, 6 bytes. On Board Device Information Type: Other Status: Enabled Description: IBM Embedded Security hardware Handle 0x0029, DMI type 11, 5 bytes. OEM Strings String 1: IBM ThinkPad Embedded Controller -[76HT14WW-1.04 ]- Handle 0x002A, DMI type 13, 22 bytes. BIOS Language Information Installable Languages: 1 enUS Currently Installed Language: enUS Handle 0x002B, DMI type 15, 25 bytes. System Event Log Area Length: 0 bytes Header Start Offset: 0x0000 Header Length: 16 bytes Data Start Offset: 0x0010 Access Method: General-purpose non-volatile data functions Access Address: 0x0000 Status: Invalid, Not Full Change Token: 0x00000000 Header Format: Type 1 Supported Log Type Descriptors: 1 Descriptor 1: POST error Data Format 1: POST results bitmap Handle 0x002C, DMI type 16, 15 bytes. Physical Memory Array Location: System Board Or Motherboard Use: System Memory Error Correction Type: None Maximum Capacity: 1 GB Error Information Handle: Not Provided Number Of Devices: 2 Handle 0x002D, DMI type 17, 27 bytes. Memory Device Array Handle: 0x002C Error Information Handle: No Error Total Width: 64 bits Data Width: 64 bits Size: 512 MB Form Factor: SODIMM Set: None Locator: DIMM 1 Bank Locator: Bank 0/1 Type: DDR Type Detail: Synchronous Speed: Unknown Manufacturer: Not Specified Serial Number: Not Specified Asset Tag: Not Specified Part Number: Not Specified Handle 0x002E, DMI type 17, 27 bytes. Memory Device Array Handle: 0x002C Error Information Handle: No Error Total Width: 64 bits Data Width: 64 bits Size: 512 MB Form Factor: SODIMM Set: None Locator: DIMM 2 Bank Locator: Bank 2/3 Type: DDR Type Detail: Synchronous Speed: Unknown Manufacturer: Not Specified Serial Number: Not Specified Asset Tag: Not Specified Part Number: Not Specified Handle 0x002F, DMI type 18, 23 bytes. 32-bit Memory Error Information Type: OK Granularity: Unknown Operation: Unknown Vendor Syndrome: Unknown Memory Array Address: Unknown Device Address: Unknown Resolution: Unknown Handle 0x0030, DMI type 19, 15 bytes. Memory Array Mapped Address Starting Address: 0x00000000000 Ending Address: 0x0003FFFFFFF Range Size: 1 GB Physical Array Handle: 0x002C Partition Width: 0 Handle 0x0031, DMI type 20, 19 bytes. Memory Device Mapped Address Starting Address: 0x00000000000 Ending Address: 0x0001FFFFFFF Range Size: 512 MB Physical Device Handle: 0x002D Memory Array Mapped Address Handle: 0x0030 Partition Row Position: 1 Handle 0x0032, DMI type 20, 19 bytes. Memory Device Mapped Address Starting Address: 0x00020000000 Ending Address: 0x0003FFFFFFF Range Size: 512 MB Physical Device Handle: 0x002E Memory Array Mapped Address Handle: 0x0030 Partition Row Position: 1 Handle 0x0033, DMI type 21, 7 bytes. Built-in Pointing Device Type: Track Point Interface: PS/2 Buttons: 3 Handle 0x0034, DMI type 21, 7 bytes. Built-in Pointing Device Type: Touch Pad Interface: PS/2 Buttons: 0 Handle 0x0035, DMI type 24, 5 bytes. Hardware Security Power-On Password Status: Disabled Keyboard Password Status: Disabled Administrator Password Status: Disabled Front Panel Reset Status: Unknown Handle 0x0036, DMI type 32, 11 bytes. System Boot Information Status: No errors detected Handle 0x0037, DMI type 131, 17 bytes. OEM-specific Type Header and Data: 83 11 37 00 01 02 03 FF FF 1F 00 00 00 00 00 02 00 Strings: BOOTINF 20h BOOTDEV 21h KEYPTRS 23h Handle 0x0038, DMI type 131, 11 bytes. OEM-specific Type Header and Data: 83 0B 38 00 00 00 E8 FF C5 01 01 Strings: IBM System Metrics Handle 0x0039, DMI type 132, 7 bytes. OEM-specific Type Header and Data: 84 07 39 00 01 D8 36 Handle 0x003A, DMI type 133, 5 bytes. OEM-specific Type Header and Data: 85 05 3A 00 01 Strings: KHOIHGIUCCHHII Handle 0x003B, DMI type 134, 13 bytes. OEM-specific Type Header and Data: 86 0D 3B 00 02 0B 00 09 02 0B 00 12 02 Handle 0x003C, DMI type 135, 13 bytes. OEM-specific Type Header and Data: 87 0D 3C 00 54 50 07 00 01 01 00 00 00 Handle 0x003D, DMI type 135, 18 bytes. OEM-specific Type Header and Data: 87 12 3D 00 54 50 07 01 01 9F 00 00 00 00 00 00 00 00 Handle 0x003E, DMI type 136, 6 bytes. OEM-specific Type Header and Data: 88 06 3E 00 5A 5A Handle 0x003F, DMI type 127, 4 bytes. End Of Table If you need anything else, please let me know. -- [dapper] Thinkpad R52 won't wake from sleep/hibernate https://launchpad.net/bugs/40332 From mjg59 at codon.org.uk Thu Apr 20 16:47:08 2006 From: mjg59 at codon.org.uk (Matthew Garrett) Date: Thu, 20 Apr 2006 16:47:08 -0000 Subject: [Bug 40332] Re: [dapper] Thinkpad R52 won't wake from sleep/hibernate References: <20060420135946.21557.63109.malonedeb@gangotri.ubuntu.com> Message-ID: <20060420164709.8495.72727.malone@gandwana.ubuntu.com> DRI gives you accelerated 3D. The drm module probably needs to reset PCI Express configuration over suspend/resume - I don't think it does that at all right now. I'll see if I can do anything about that. ** Changed in: acpi-support (Ubuntu) Sourcepackagename: acpi-support => linux-source-2.6.15 -- [dapper] Thinkpad R52 won't wake from sleep/hibernate https://launchpad.net/bugs/40332 From jamesmbaker at gmail.com Thu Apr 20 16:53:23 2006 From: jamesmbaker at gmail.com (rael9) Date: Thu, 20 Apr 2006 16:53:23 -0000 Subject: [Bug 40332] Re: [dapper] Thinkpad R52 won't wake from sleep/hibernate References: <20060420135946.21557.63109.malonedeb@gangotri.ubuntu.com> Message-ID: <20060420165323.8468.20186.malone@gandwana.ubuntu.com> OK, just to really throw you for a loop, here... I decided to try out the fglrx drivers just to see if they'd work for my chip. They do, and upon waking up, with dri enabled, it's fine. No garbled video or anything. The only problem there is, there is a line that follows the mouse around. I assume it's some sort of rendering artifact from the fglrx drivers. I would take a screenshot, but the mouse disappears when I do. It changes color based on where I clicked last, and is approximately a folder icon's height below the pointer and a folder icon and a half's width by 2 pixels high. Of course, this is most likely an ATi problem rather than an Ubuntu problem, but I digress. -- [dapper] Thinkpad R52 won't wake from sleep/hibernate https://launchpad.net/bugs/40332 From spam.to.f at lkenhagen.de Thu Apr 20 17:47:45 2006 From: spam.to.f at lkenhagen.de (Jan Falkenhagen) Date: Thu, 20 Apr 2006 17:47:45 -0000 Subject: [Bug 40371] cambridge silicon radio bluetooth dongle prevents from successfull suspend References: <20060420174745.8495.22217.malonedeb@gandwana.ubuntu.com> Message-ID: <20060420174745.8495.22217.malonedeb@gandwana.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 linux-image-2.6.15-20-686 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: when the bluetooth-dongle is activated, my acer travelmate 801LCiB fails to suspend properly. if its deactivated suspend is working fine (fully reproducible). bluetooth dongle model: Bus 003 Device 004: ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode) -- cambridge silicon radio bluetooth dongle prevents from successfull suspend https://launchpad.net/bugs/40371 From jamesmbaker at gmail.com Thu Apr 20 17:45:56 2006 From: jamesmbaker at gmail.com (rael9) Date: Thu, 20 Apr 2006 17:45:56 -0000 Subject: [Bug 40332] Re: [dapper] Thinkpad R52 won't wake from sleep/hibernate References: <20060420135946.21557.63109.malonedeb@gangotri.ubuntu.com> Message-ID: <20060420174557.8495.90011.malone@gandwana.ubuntu.com> Strike that. I don't think dri was actually active, as the video wasn't hardware accelerated. I was missing the linux-restricted-modules-... package, so the ATi drivers weren't working properly. After installing this package, hardware acceleration works, but sleep does not. So I would say that it is truly a dri problem. -- [dapper] Thinkpad R52 won't wake from sleep/hibernate https://launchpad.net/bugs/40332 From jean-francois.burguet at student.uclouvain.be Thu Apr 20 19:55:10 2006 From: jean-francois.burguet at student.uclouvain.be (Djief) Date: Thu, 20 Apr 2006 19:55:10 -0000 Subject: [Bug 21057] Re: Sound from ES1978 Maestro 2E garbled when USB CD-ROM drive plugged in References: <20060113141036.21012.76826.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060420195510.21557.23947.malone@gangotri.ubuntu.com> The bug is still present in the latest kernel :( cat /proc/version Linux version 2.6.15-20-686 (buildd at vernadsky) (gcc version 4.0.3 (Ubuntu 4.0.3-1ubuntu3)) #1 SMP PREEMPT Tue Apr 4 18:37:00 UTC 2006 -- Sound from ES1978 Maestro 2E garbled when USB CD-ROM drive plugged in https://launchpad.net/bugs/21057 From kelly.a.campbell at gmail.com Thu Apr 20 20:47:43 2006 From: kelly.a.campbell at gmail.com (Kelly Campbell) Date: Thu, 20 Apr 2006 20:47:43 -0000 Subject: [Bug 35788] Re: panic on boot with 2.6.15-18-amd64-generic References: <20060320224342.22884.40303.malonedeb@gangotri.ubuntu.com> Message-ID: <20060420204743.21526.60137.malone@gangotri.ubuntu.com> I'm experiencing this bug also with the latest 6.06 beta live cd. nosmp and acpi=off work for me. -- panic on boot with 2.6.15-18-amd64-generic https://launchpad.net/bugs/35788 From asraniel at fryx.ch Thu Apr 20 21:00:01 2006 From: asraniel at fryx.ch (Asraniel) Date: Thu, 20 Apr 2006 21:00:01 -0000 Subject: [Bug 24270] Re: Screen flickering References: <20060113142814.21012.74045.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060420210001.8495.98672.malone@gandwana.ubuntu.com> same here, its rare, but it happens. switching consoles is the fix for me. not acceptable for newbies -- Screen flickering https://launchpad.net/bugs/24270 From netkid91 at gmail.com Thu Apr 20 21:27:12 2006 From: netkid91 at gmail.com (netkid91) Date: Thu, 20 Apr 2006 21:27:12 -0000 Subject: [Bug 31926] Re: Nidiswrapper / acx_pci conflict. References: <20060218233809.833.64474.malonedeb@gandwana.ubuntu.com> Message-ID: <20060420212712.21557.5852.malone@gangotri.ubuntu.com> Yes, the ACX driver does support the WG311, in fact I am making this post through one right now on Dapper Drake(6.06). However the issue lies in the 'default' firmware loaded for the card, try doing: sudo rmmod acx sudo insmod acx firmware_ver=1.2.0.30 And then configure your network and see if it works. Now, what I have done so far means you have to re-run these commands each time you reboot, I'm looking for a permanant solution. This bug needs a higher priority, but the fix should be simple, really you just need a symlink change from /lib/firmware/2.6.15-19-386/acx/default/tiacx111* to the files listed in /lib/firmware/2.6.15-19-386/acx/1.2.0.30. Anyways, signing off. BTW, want the lspci output, I got it. lspci: stefan at ubuntu:/etc$ lspci 0000:00:00.0 Host bridge: VIA Technologies, Inc. VT8601 [Apollo ProMedia] (rev 05) 0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT8601 [Apollo ProMedia AGP] 0000:00:07.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super South] (rev 22) 0000:00:07.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 10) 0000:00:07.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 10) 0000:00:07.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 10) 0000:00:07.4 Bridge: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] (rev 30) 0000:00:07.5 Multimedia audio controller: VIA Technologies, Inc. VT82C686 AC97 Audio Controller (rev 20) 0000:00:08.0 VGA compatible controller: ATI Technologies Inc RV280 [Radeon 9200 SE] (rev 01) 0000:00:08.1 Display controller: ATI Technologies Inc RV280 [Radeon 9200 SE] (Secondary) (rev 01) 0000:00:09.0 Network controller: Texas Instruments ACX 111 54Mbps Wireless Interface 0000:00:0a.0 Ethernet controller: 3Com Corporation 3c905C-TX/TX-M [Tornado] (rev 6c) 0000:01:00.0 VGA compatible controller: Trident Microsystems CyberBlade/i1 (rev 6a) stefan at ubuntu:/etc$ lspci -n: stefan at ubuntu:/etc$ lspci -n 0000:00:00.0 0600: 1106:0601 (rev 05) 0000:00:01.0 0604: 1106:8601 0000:00:07.0 0601: 1106:0686 (rev 22) 0000:00:07.1 0101: 1106:0571 (rev 10) 0000:00:07.2 0c03: 1106:3038 (rev 10) 0000:00:07.3 0c03: 1106:3038 (rev 10) 0000:00:07.4 0680: 1106:3057 (rev 30) 0000:00:07.5 0401: 1106:3058 (rev 20) 0000:00:08.0 0300: 1002:5964 (rev 01) 0000:00:08.1 0380: 1002:5d44 (rev 01) 0000:00:09.0 0280: 104c:9066 0000:00:0a.0 0200: 10b7:9200 (rev 6c) 0000:01:00.0 0300: 1023:8500 (rev 6a) stefan at ubuntu:/etc$ -- Nidiswrapper / acx_pci conflict. https://launchpad.net/bugs/31926 From aeon.descriptor at gmail.com Thu Apr 20 22:04:23 2006 From: aeon.descriptor at gmail.com (Brian Visel) Date: Thu, 20 Apr 2006 22:04:23 -0000 Subject: [Bug 40432] inotify does not log its existence in kernel References: <20060420220423.8495.82819.malonedeb@gandwana.ubuntu.com> Message-ID: <20060420220423.8495.82819.malonedeb@gandwana.ubuntu.com> Public bug reported: Affects: linux-meta linux-686 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: Inotify does not post anything to the kernel log. While it can be found through grepping /boot/config-, it would be nice if it gave us a message in the kernel log as well. -- inotify does not log its existence in kernel https://launchpad.net/bugs/40432 From aeon.descriptor at gmail.com Thu Apr 20 22:10:08 2006 From: aeon.descriptor at gmail.com (Brian Visel) Date: Thu, 20 Apr 2006 22:10:08 -0000 Subject: [Bug 40436] inotify has no /dev/inotify device References: <20060420221008.8495.12483.malonedeb@gandwana.ubuntu.com> Message-ID: <20060420221008.8495.12483.malonedeb@gandwana.ubuntu.com> Public bug reported: Affects: linux-meta linux-686 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: While the preferred method for accessing inotify is through kernel calls, it would be nice to support the older framework as well. -- inotify has no /dev/inotify device https://launchpad.net/bugs/40436 From aeon.descriptor at gmail.com Thu Apr 20 22:11:47 2006 From: aeon.descriptor at gmail.com (Brian Visel) Date: Thu, 20 Apr 2006 22:11:47 -0000 Subject: [Bug 40436] Re: inotify has no /dev/inotify device References: <20060420221008.8495.12483.malonedeb@gandwana.ubuntu.com> Message-ID: <20060420221148.8468.89995.malone@gandwana.ubuntu.com> Temporarily using mknod /dev/inotify c 10 63 -- inotify has no /dev/inotify device https://launchpad.net/bugs/40436 From osch0001 at umn.edu Fri Apr 21 00:24:00 2006 From: osch0001 at umn.edu (osch0001) Date: Fri, 21 Apr 2006 00:24:00 -0000 Subject: [Bug 23513] Re: [r128] screen only updates every several minutes References: <20060113142406.21012.10559.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060421002400.8495.38243.malone@gandwana.ubuntu.com> I just tested this out with the new Dapper beta, and the problem still exists. ** Attachment added: "Xorg.0.log for Dapper" http://librarian.launchpad.net/2239247/Xorg.0.log.2006.04.20 ** Attachment added: "dmesg output on Dapper" http://librarian.launchpad.net/2239249/dmesg.2006.04.20 ** Attachment added: "xorg.conf file on Dapper" http://librarian.launchpad.net/2239251/xorg.conf.2006.04.20 -- [r128] screen only updates every several minutes https://launchpad.net/bugs/23513 From sergey.udaltsov at gmail.com Fri Apr 21 00:32:24 2006 From: sergey.udaltsov at gmail.com (Sergey V. Udaltsov) Date: Fri, 21 Apr 2006 00:32:24 -0000 Subject: [Bug 22238] Re: Use later version of acx References: <20060113141710.21012.7837.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060421003224.8495.7215.malone@gandwana.ubuntu.com> Since the fix (latest Dapper kernel) does not help - should this bug be reopened? -- Use later version of acx https://launchpad.net/bugs/22238 From airlied at gmail.com Fri Apr 21 00:52:12 2006 From: airlied at gmail.com (airlied) Date: Fri, 21 Apr 2006 00:52:12 -0000 Subject: [Bug 40332] Re: [dapper] Thinkpad R52 won't wake from sleep/hibernate References: <20060420135946.21557.63109.malonedeb@gangotri.ubuntu.com> Message-ID: <20060421005212.21526.54467.malone@gangotri.ubuntu.com> I've made some fixes to the ATI stable driver in X.org CVS, I think fabbione was updating the dapper driver from this previously. When fabbione can upload a latest version of that driver to dapper, I think it should fix this issue, my laptop suspend/resumes fine with glxgears running and it is PCIE. This isn't a kernel problem it was an X issue. -- [dapper] Thinkpad R52 won't wake from sleep/hibernate https://launchpad.net/bugs/40332 From ikezoe at good-day.co.jp Fri Apr 21 00:50:24 2006 From: ikezoe at good-day.co.jp (Hiroyuki Ikezoe) Date: Fri, 21 Apr 2006 00:50:24 -0000 Subject: [Bug 32593] Re: Dell X1 fails to resume with mmc_core and sdhci modules loaded References: <20060223111634.15768.50276.malonedeb@gandwana.ubuntu.com> Message-ID: <20060421005024.8468.63745.malone@gandwana.ubuntu.com> still happen on Panasonic CF-Y4 with kernel 2.6.15-20-386. -- Dell X1 fails to resume with mmc_core and sdhci modules loaded https://launchpad.net/bugs/32593 From sergey.udaltsov at gmail.com Fri Apr 21 01:10:18 2006 From: sergey.udaltsov at gmail.com (Sergey V. Udaltsov) Date: Fri, 21 Apr 2006 01:10:18 -0000 Subject: [Bug 22238] Re: Use later version of acx References: <20060113141710.21012.7837.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060421011018.21557.71766.malone@gangotri.ubuntu.com> Additional info: FC5 with freshrpm kernel modules picks acx_usb ok. But they load additional firmware in the process. Should ubuntu provide .deb with the firmware for acx? -- Use later version of acx https://launchpad.net/bugs/22238 From kiddo at nanokron.info Fri Apr 21 01:19:00 2006 From: kiddo at nanokron.info (Jeff Fortin) Date: Fri, 21 Apr 2006 01:19:00 -0000 Subject: [Bug 38220] Re: Xorg [dri] i915 kernel module is 1.1 References: <20060405164018.24486.5077.malonedeb@gangotri.ubuntu.com> Message-ID: <20060421011900.8468.2312.malone@gandwana.ubuntu.com> Okay, just to make sure, will this automagically get fixed for the release? It would suck being stuck with a card that has free drivers and no acceleration (the "low urgency" is the thing scaring me here). Will this be solved by using dri snapshots or some other way? -- Xorg [dri] i915 kernel module is 1.1 https://launchpad.net/bugs/38220 From airlied at gmail.com Fri Apr 21 01:47:47 2006 From: airlied at gmail.com (airlied) Date: Fri, 21 Apr 2006 01:47:47 -0000 Subject: [Bug 40332] Re: [dapper] Thinkpad R52 won't wake from sleep/hibernate References: <20060420135946.21557.63109.malonedeb@gangotri.ubuntu.com> Message-ID: <20060421014747.21526.85886.launchpad@gangotri.ubuntu.com> ** Changed in: linux-source-2.6.15 (Ubuntu) Sourcepackagename: linux-source-2.6.15 => xserver-xorg-driver-ati Status: Needs Info => In Progress -- [dapper] Thinkpad R52 won't wake from sleep/hibernate https://launchpad.net/bugs/40332 From onerobot at gmail.com Fri Apr 21 02:19:53 2006 From: onerobot at gmail.com (John Simpkins) Date: Fri, 21 Apr 2006 02:19:53 -0000 Subject: [Bug 34958] Re: IRQ 11 disabled, no network, desktop / kernel freeze (Averatec laptop) - regression from Breezy References: <20060314220405.17018.47701.malonedeb@gangotri.ubuntu.com> Message-ID: <20060421021953.21557.55185.launchpad@gangotri.ubuntu.com> ** Attachment added: "Output of lspci -vv attached" http://librarian.launchpad.net/2239583/lspci -- IRQ 11 disabled, no network, desktop / kernel freeze (Averatec laptop) - regression from Breezy https://launchpad.net/bugs/34958 From onerobot at gmail.com Fri Apr 21 02:31:24 2006 From: onerobot at gmail.com (John Simpkins) Date: Fri, 21 Apr 2006 02:31:24 -0000 Subject: [Bug 34958] Re: IRQ 11 disabled, no network, desktop / kernel freeze (Averatec laptop) - regression from Breezy References: <20060314220405.17018.47701.malonedeb@gangotri.ubuntu.com> Message-ID: <20060421023124.21526.85709.launchpad@gangotri.ubuntu.com> ** Attachment added: "Output of "cat /proc/interrupts" attached" http://librarian.launchpad.net/2239589/interrupts -- IRQ 11 disabled, no network, desktop / kernel freeze (Averatec laptop) - regression from Breezy https://launchpad.net/bugs/34958 From pardasaniman at yahoo.com Fri Apr 21 03:14:41 2006 From: pardasaniman at yahoo.com (Utsav Pardasani) Date: Fri, 21 Apr 2006 03:14:41 -0000 Subject: [Bug 23522] Re: Kernel Hangs after probing IDE for a long time. References: <20060113142409.21012.85012.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060421031441.8495.9029.malone@gandwana.ubuntu.com> Thank you for that kind reminder. I've just tried out the Live CD, and it did not hang. (the previous live cd hanged) -- Kernel Hangs after probing IDE for a long time. https://launchpad.net/bugs/23522 From jeff.waugh at ubuntu.com Fri Apr 21 04:44:04 2006 From: jeff.waugh at ubuntu.com (Jeff Waugh) Date: Fri, 21 Apr 2006 04:44:04 -0000 Subject: [Bug 40478] Promise TX4300/4310 driver update References: <20060421044404.21526.98815.malonedeb@gangotri.ubuntu.com> Message-ID: <20060421044404.21526.98815.malonedeb@gangotri.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: There was an updateto the sata_promise driver (referred to here: http://lwn.net/Articles/176208/) that added support for a couple of new chipsets. It would be extremely handy if this could be updated before the 6.06 LTS release. Thanks! -- Promise TX4300/4310 driver update https://launchpad.net/bugs/40478 From xenon at ngi.it Fri Apr 21 06:49:58 2006 From: xenon at ngi.it (Matteo) Date: Fri, 21 Apr 2006 06:49:58 -0000 Subject: [Bug 20062] Re: Keyboard non-responsive when using kernel 2.6.12 (breezy) References: <20060113140508.21012.73082.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060421064958.21557.5399.malone@gangotri.ubuntu.com> i have upgraded to dapper beta yesterday and i got the same problem: no keyboard nor mouse in GDM. Tryed to boot with noapic and nolapic options in grub but it didn't helped. So i disabled in the BIOS the hypertreading funcion an everyting gone ok. I think ther's something in the SMP kernels that prevents the correct working of ps/2 ports if the hyperthreading function is enabled. -- Keyboard non-responsive when using kernel 2.6.12 (breezy) https://launchpad.net/bugs/20062 From dsilvers at digital-scurf.org Fri Apr 21 11:21:57 2006 From: dsilvers at digital-scurf.org (Daniel Silverstone) Date: Fri, 21 Apr 2006 11:21:57 -0000 Subject: [Bug 38174] Re: Power management doesn't work on N340S8 laptop. References: <20060405114042.14572.96835.malonedeb@gandwana.ubuntu.com> Message-ID: <20060421112157.17643.99877.malone@gandwana.ubuntu.com> Should be reasonably trivial to whitelist this laptop ** Changed in: acpi (Ubuntu) Sourcepackagename: acpi => acpi-support Assignee: (unassigned) => Daniel Silverstone Status: Unconfirmed => Confirmed -- Power management doesn't work on N340S8 laptop. https://launchpad.net/bugs/38174 From mjg59 at codon.org.uk Fri Apr 21 11:40:56 2006 From: mjg59 at codon.org.uk (Matthew Garrett) Date: Fri, 21 Apr 2006 11:40:56 -0000 Subject: [Bug 40332] Re: [dapper] Thinkpad R52 won't wake from sleep/hibernate References: <20060420135946.21557.63109.malonedeb@gangotri.ubuntu.com> Message-ID: <20060421114056.17643.90889.malone@gandwana.ubuntu.com> Should be fixed in the latest upload (it'll take a couple of hours to hit the archive) ** Changed in: xserver-xorg-driver-ati (Ubuntu) Status: In Progress => Fix Committed -- [dapper] Thinkpad R52 won't wake from sleep/hibernate https://launchpad.net/bugs/40332 From allan.stringer at gmail.com Fri Apr 21 12:12:48 2006 From: allan.stringer at gmail.com (Allan) Date: Fri, 21 Apr 2006 12:12:48 -0000 Subject: [Bug 20062] Re: Keyboard non-responsive when using kernel 2.6.12 (breezy) References: <20060113140508.21012.73082.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060421121248.17643.82933.malone@gandwana.ubuntu.com> My wireless keyboard and mouse now work - I solved the problem by disabling usb 2.0 support in the bios. I'm currently using the 2.6.15-20-686 kernel. -- Keyboard non-responsive when using kernel 2.6.12 (breezy) https://launchpad.net/bugs/20062 From jonathan.watmough at gmail.com Fri Apr 21 12:43:17 2006 From: jonathan.watmough at gmail.com (Jonathan Watmough) Date: Fri, 21 Apr 2006 12:43:17 -0000 Subject: [Bug 27399] Re: Sound Issues Thinkpad 600X - ALSA playback choppy, OSS crashes References: <20060113145419.21012.47147.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060421124317.17670.75040.malone@gandwana.ubuntu.com> I installed the Dapper Beta to my own ThinkPad 600X and it has behaved itself aside from the prism/isl3886 firmware problems. I have not yet tested any of the media streamer stuff, but ambient effects like the login sound play fine. Also, my previous gentoo install on this machine played sound and movies fine, and also managed suspend/resume, so I'm hoping for a similar level from Dapper. -- Sound Issues Thinkpad 600X - ALSA playback choppy, OSS crashes https://launchpad.net/bugs/27399 From jamesmbaker at gmail.com Fri Apr 21 13:32:13 2006 From: jamesmbaker at gmail.com (rael9) Date: Fri, 21 Apr 2006 13:32:13 -0000 Subject: [Bug 40332] Re: [dapper] Thinkpad R52 won't wake from sleep/hibernate References: <20060420135946.21557.63109.malonedeb@gangotri.ubuntu.com> Message-ID: <20060421133213.30501.86920.malone@gangotri.ubuntu.com> It seems to work. I put it to sleep, and it woke right back up with the screensaver going and the screen locked. Now if we can get ATi to update their drivers so that we can have good 3d rendering... Fat chance there. Excellent work, guys. I'm thoroughly impressed with how fast that bug was squashed. -- [dapper] Thinkpad R52 won't wake from sleep/hibernate https://launchpad.net/bugs/40332 From dangerjunkie2002 at yahoo.com Fri Apr 21 13:42:31 2006 From: dangerjunkie2002 at yahoo.com (Paul Stimpson) Date: Fri, 21 Apr 2006 13:42:31 -0000 Subject: [Bug 29613] Ubuntu Breezy installer hangs at "Choose Language" on Acer Travelmate 4100WLMi References: <20060124231937.15826.12020.malonedeb@gandwana.ubuntu.com> Message-ID: <20060421134231.30538.56984.launchpad@canonical@gangotri.ubuntu.com> Public bug reported: Affects: Ubuntu Severity: Normal Priority: (none set) Status: Rejected Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: Acer Travelmate 4100WLMi (Spec at http://surrey.lug.org.uk/cgi- bin/wiki.pl?TravelMate4100WLMi ) can run Breezy if it is an upgrade from Hoary but not as a fresh install. I put in a brand new HD to the machine then installed Windows XP Home in a single NTFS partition taking up 20-odd Gig of disc space. I then tried to install Breezy. The parameter "noapic" is needed to get any Hoary or Breezy disc to boot and was used. The installer started and displayed the "Choose Language" screen at which point the machine locked solid. The problem is repeatable and happens every time. I checked the MD5 sum of the image and burned another disc which showed identical symptoms. The Hoary installer booted fine so this is something that has changed. -- Ubuntu Breezy installer hangs at "Choose Language" on Acer Travelmate 4100WLMi https://launchpad.net/bugs/29613 From mdz at ubuntu.com Fri Apr 21 13:42:30 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Fri, 21 Apr 2006 13:42:30 -0000 Subject: [Bug 29613] Re: Ubuntu Breezy installer hangs at "Choose Language" on Acer Travelmate 4100WLMi References: <20060124231937.15826.12020.malonedeb@gandwana.ubuntu.com> Message-ID: <20060421134230.30538.66209.launchpad@gangotri.ubuntu.com> ** Changed in: debian-installer (Ubuntu) Sourcepackagename: debian-installer => linux-source-2.6.15 -- Ubuntu Breezy installer hangs at "Choose Language" on Acer Travelmate 4100WLMi https://launchpad.net/bugs/29613 From mdz at ubuntu.com Fri Apr 21 13:41:44 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Fri, 21 Apr 2006 13:41:44 -0000 Subject: [Bug 27422] Re: [Bug 27422] Re: [Bug 27422] Re: USB Wi-Fi AirVast not detected References: <20060113145426.21012.92636.launchpad@macquarie.warthogs.hbd.com> <20060401002645.5415.51405.malone@gangotri.ubuntu.com> <97a9d8c80603311751h74510e41oc469c03ebeef3237@mail.gmail.com> Message-ID: <20060421134144.GK7344@alcor.net> On Sat, Apr 01, 2006 at 01:51:37AM -0000, Robi wrote: > I have tried it in the dapper flight2 release, but not recent. If code > hasn't changed since then, good bet it's still broken. The kernel has been updated several times since then; please try the Beta release or newer. https://lists.ubuntu.com/archives/ubuntu-announce/2006-April/000065.html -- - mdz -- USB Wi-Fi AirVast not detected https://launchpad.net/bugs/27422 From mdz at ubuntu.com Fri Apr 21 13:41:18 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Fri, 21 Apr 2006 13:41:18 -0000 Subject: [Bug 2962] Re: [Bug 2962] Re: [Bug 2962] Re: Register of Power Status Change Requires Removal & References: <20051008140639.14682.11809.malonedeb@gangotri.ubuntu.com> <500448.1143843075966.JavaMail.www-data@www2> Message-ID: <20060421134118.GJ7344@alcor.net> On Fri, Mar 31, 2006 at 10:11:15PM -0000, edal wrote: > I'd love to, but the last time I tried downloading an ISO of Dapper I could not get it to boot. If you give me an address where I can get a working copy I will try it out over the weekend on a spare disk. https://lists.ubuntu.com/archives/ubuntu-announce/2006-April/000065.html For future reference, if Ubuntu fails to boot on your system, we would like to hear about it in the form of a new bug report (or a comment on an existing one if it is already filed). The reason why we publish new ISOs every day is to get this kind of feedback. :-) -- - mdz -- Register of Power Status Change Requires Removal & Reinsertion of Battery https://launchpad.net/bugs/2962 From jmsunseri at gmail.com Fri Apr 21 14:00:16 2006 From: jmsunseri at gmail.com (Justin Sunseri) Date: Fri, 21 Apr 2006 14:00:16 -0000 Subject: [Bug 40471] Hibernation works on my laptop but sometimes it doesn't References: <20060421033743.21526.84413.malonedeb@gangotri.ubuntu.com> Message-ID: <20060421140016.17643.83215.launchpad@canonical@gandwana.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: Lenovo 3000 n100 laptop, hibernation does work but after a while when i try to hibernate the laptop it goes down and then comes right back up without any prompting from me. Suspending to RAM always work. I am not sure what could be causing hibernation not to work. it appears as though i have enough available room in swap to store all the data that is in RAM. I don't think the computer goes all the way hibernation because when it comes back it doesnt go through the nromal hibernation wake-up process. -- Hibernation works on my laptop but sometimes it doesn't https://launchpad.net/bugs/40471 From jgotangco at ubuntu.com Fri Apr 21 13:57:00 2006 From: jgotangco at ubuntu.com (Jerome S. Gotangco) Date: Fri, 21 Apr 2006 13:57:00 -0000 Subject: [Bug 33368] Re: X freeze the computer (Dapper - glcore) References: <20060302082234.17525.50004.malonedeb@gangotri.ubuntu.com> Message-ID: <20060421135700.17643.79839.malone@gandwana.ubuntu.com> Sorry for the late reply. I just looked at the log files. I'd like to confirm this, but we're already in Beta. Is there a chance you can test this in beta and confirm it still persists? Thanks. Jerome -- X freeze the computer (Dapper - glcore) https://launchpad.net/bugs/33368 From robitaille at gmail.com Fri Apr 21 14:00:16 2006 From: robitaille at gmail.com (Daniel Robitaille) Date: Fri, 21 Apr 2006 14:00:16 -0000 Subject: [Bug 40471] Re: Hibernation works on my laptop but sometimes it doesn't References: <20060421033743.21526.84413.malonedeb@gangotri.ubuntu.com> Message-ID: <20060421140016.17643.58402.launchpad@gandwana.ubuntu.com> ** Changed in: Ubuntu Sourcepackagename: None => linux-source-2.6.15 -- Hibernation works on my laptop but sometimes it doesn't https://launchpad.net/bugs/40471 From jstueve at verizon.net Fri Apr 21 14:03:28 2006 From: jstueve at verizon.net (jstueve) Date: Fri, 21 Apr 2006 14:03:28 -0000 Subject: [Bug 38220] Re: Xorg [dri] i915 kernel module is 1.1 References: <20060405164018.24486.5077.malonedeb@gangotri.ubuntu.com> Message-ID: <20060421140328.17670.10304.malone@gandwana.ubuntu.com> It isn't really a 'bug' because I had installed a version of libgl1-mesa that wasn't in the official repos. Sorry for any confusion. -- Xorg [dri] i915 kernel module is 1.1 https://launchpad.net/bugs/38220 From martin.bergner at online.de Fri Apr 21 14:04:34 2006 From: martin.bergner at online.de (Martin Bergner) Date: Fri, 21 Apr 2006 14:04:34 -0000 Subject: [Bug 39237] Re: Resuming from hibernation fails References: <20060412012833.32233.60531.malonedeb@gandwana.ubuntu.com> Message-ID: <20060421140434.30501.40476.malone@gangotri.ubuntu.com> I can confirm this with the kernel on the Dapper Beta LiveCD after the installation! ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Unconfirmed => Confirmed -- Resuming from hibernation fails https://launchpad.net/bugs/39237 From fabio.pedretti at ing.unibs.it Fri Apr 21 14:28:06 2006 From: fabio.pedretti at ing.unibs.it (Fabio Pedretti) Date: Fri, 21 Apr 2006 14:28:06 -0000 Subject: [Bug 40119] Re: SPARC boot failed: Illegal Instruction References: <20060419084429.8468.45532.malonedeb@gandwana.ubuntu.com> Message-ID: <20060421142806.17643.85984.malone@gandwana.ubuntu.com> I tried the beta of ubuntu-server found here: http://cdimage.ubuntu.com/ubuntu-server/ports/releases/dapper/beta/ubuntu-server-6.06-beta-install-sparc.iso but I have again the same problem: Illegal Instruction. Where can I download the beta netinstall image? Here: http://ports.ubuntu.com/ubuntu-ports/dists/dapper/main/installer-sparc/current/images/sparc64/netboot/2.6/boot.img I see the old image from 17 april. -- SPARC boot failed: Illegal Instruction https://launchpad.net/bugs/40119 From ubuntu at paul.sladen.org Fri Apr 21 14:31:41 2006 From: ubuntu at paul.sladen.org (Paul Sladen) Date: Fri, 21 Apr 2006 14:31:41 -0000 Subject: [Bug 35319] Re: no Fn at all Vaio SZ1XP Dapper References: <20060317124552.11105.6446.malonedeb@gandwana.ubuntu.com> Message-ID: <20060421143141.17670.7776.launchpad@gandwana.ubuntu.com> ** Changed in: linux-source-2.6.15 (Ubuntu) Assignee: Ubuntu Laptop Team => Ben Collins Status: Confirmed => In Progress -- no Fn at all Vaio SZ1XP Dapper https://launchpad.net/bugs/35319 From jmsunseri at gmail.com Fri Apr 21 14:50:39 2006 From: jmsunseri at gmail.com (Justin Sunseri) Date: Fri, 21 Apr 2006 14:50:39 -0000 Subject: [Bug 40471] Re: [Bug 40471] Re: Hibernation works on my laptop but sometimes it doesn't References: <20060421033743.21526.84413.malonedeb@gangotri.ubuntu.com> <20060421140016.17643.58402.launchpad@gandwana.ubuntu.com> Message-ID: <935d51230604210750u73473a00k4378bfc7f40e5602@mail.gmail.com> Is it possible that this could be an issue with the amount of swap space i have on my machine and if so how can i make sure that this is the cause of the problem? On 4/21/06, Daniel Robitaille wrote: > ** Changed in: Ubuntu > Sourcepackagename: None => linux-source-2.6.15 > > -- > Hibernation works on my laptop but sometimes it doesn't > https://launchpad.net/bugs/40471 > -- Sincerely Justin Sunseri -- Hibernation works on my laptop but sometimes it doesn't https://launchpad.net/bugs/40471 From ariel.vardi at gmail.com Fri Apr 21 15:04:01 2006 From: ariel.vardi at gmail.com (Ariel Vardi) Date: Fri, 21 Apr 2006 15:04:01 -0000 Subject: [Bug 35319] Re: no Fn at all Vaio SZ1XP Dapper References: <20060317124552.11105.6446.malonedeb@gandwana.ubuntu.com> Message-ID: <20060421150401.30538.45911.malone@gangotri.ubuntu.com> Applied the fix and recompiled the kernel. It works perfectly now. The Fn keys work right after the boot, after a suspend, and hibernation. They even work with gnome without any setup. Great work! -- no Fn at all Vaio SZ1XP Dapper https://launchpad.net/bugs/35319 From angystardust at gmail.com Fri Apr 21 15:17:45 2006 From: angystardust at gmail.com (angystardust) Date: Fri, 21 Apr 2006 15:17:45 -0000 Subject: [Bug 33950] Re: hdaps Y axis inverted References: <20060307013424.9003.68623.malonedeb@gandwana.ubuntu.com> Message-ID: <20060421151745.17643.89084.malone@gandwana.ubuntu.com> Dagfinn, maybe this bug is fixed in the newest kernel version (linux-source-2.6.15-21). Quote from the changelog: > hdaps: Correct x/y inversions for IBM notebooks and others. "apt-get update && apt-get dist-upgrade" and let us know! -- hdaps Y axis inverted https://launchpad.net/bugs/33950 From edal at freestart.hu Fri Apr 21 16:00:42 2006 From: edal at freestart.hu (edal) Date: Fri, 21 Apr 2006 16:00:42 -0000 Subject: [Bug 2962] Re: ISO Boot Problem References: <20051008140639.14682.11809.malonedeb@gangotri.ubuntu.com> Message-ID: <2096075.1145635242809.JavaMail.www-data@www3> No worries. I suspect that the problem was due to a bad CD burn, the latest Dapper release boots and loads fine on the same system. EA 2006.04.21. 14:41-kor Matt Zimmerman írta: > On Fri, Mar 31, 2006 at 10:11:15PM -0000, edal wrote: > > I'd love to, but the last time I tried downloading an ISO of Dapper I could not get it to boot. If you give me an address where I can get a working copy I will try it out over the weekend on a spare disk. > https://lists.ubuntu.com/archives/ubuntu-announce/2006-April/000065.html > For future reference, if Ubuntu fails to boot on your system, we would like > to hear about it in the form of a new bug report (or a comment on an > existing one if it is already filed). The reason why we publish new ISOs > every day is to get this kind of feedback. :-) > -- > - mdz > -- > Register of Power Status Change Requires Removal & Reinsertion of Battery > https://launchpad.net/bugs/2962 ____________________________________________________________________ Miert fizetsz az internetert? Korlatlan, ingyenes internet hozzaferes a FreeStarttol Probald ki most! http://www.freestart.hu -- Register of Power Status Change Requires Removal & Reinsertion of Battery https://launchpad.net/bugs/2962 From sh at warma.dk Fri Apr 21 16:19:07 2006 From: sh at warma.dk (Soren Hansen) Date: Fri, 21 Apr 2006 16:19:07 -0000 Subject: [Bug 40282] Re: scp transfer couses system to freeze References: <20060420080529.8495.88291.malonedeb@gandwana.ubuntu.com> Message-ID: <20060421161907.17643.17271.malone@gandwana.ubuntu.com> Is it only scp that does this? And does it only happen when connection to that server? Try doing it in a console and when it crashes, do an Alt-SysRq-p. That should give you a backtrace. Try copying that backtrace here. -- scp transfer couses system to freeze https://launchpad.net/bugs/40282 From 84yelo3 at gmail.com Fri Apr 21 16:58:44 2006 From: 84yelo3 at gmail.com (=?utf-8?q?Nicol=C3=B2_Chieffo?=) Date: Fri, 21 Apr 2006 16:58:44 -0000 Subject: [Bug 36885] Re: Asus laptop hangs on TFT/VGA video switch (Fn-F8) References: <20060327182219.6279.42415.malonedeb@gandwana.ubuntu.com> Message-ID: <20060421165844.30501.73821.malone@gangotri.ubuntu.com> is there anything else I can try? I've noticed that someone else is having the same problem (using debian, but the vanilla kernel seems not influenced by this bug)! http://www.openlaptops.org/index.php/topic,89.0.html -- Asus laptop hangs on TFT/VGA video switch (Fn-F8) https://launchpad.net/bugs/36885 From 84yelo3 at gmail.com Fri Apr 21 16:55:22 2006 From: 84yelo3 at gmail.com (=?utf-8?q?Nicol=C3=B2_Chieffo?=) Date: Fri, 21 Apr 2006 16:55:22 -0000 Subject: [Bug 36403] Re: suspend hangs ipw2200 References: <20060324110342.4831.93832.malonedeb@gandwana.ubuntu.com> Message-ID: <20060421165522.30501.59432.malone@gangotri.ubuntu.com> again I'm using latest dapper and I've checked /etc/default/acpi-support it says so: # Note that network cards and USB controllers will automatically be unloaded # unless they're listed in MODULES_WHITELIST and that variable is empty... (again I'm using ad updated dapper) -- suspend hangs ipw2200 https://launchpad.net/bugs/36403 From 84yelo3 at gmail.com Fri Apr 21 18:08:48 2006 From: 84yelo3 at gmail.com (=?utf-8?q?Nicol=C3=B2_Chieffo?=) Date: Fri, 21 Apr 2006 18:08:48 -0000 Subject: [Bug 37010] Re: ipw2200 doesn't retain sleep status after sleep/hibernate/reboot References: <20060328141614.20484.54456.malonedeb@gangotri.ubuntu.com> Message-ID: <20060421180848.17670.45917.malone@gandwana.ubuntu.com> Radio status means the one in /sys/class/net/eth1/device/power/state or the software pci kill in /sys/class/net/eth1/device/rf_kill -- ipw2200 doesn't retain sleep status after sleep/hibernate/reboot https://launchpad.net/bugs/37010 From burner at suppressingfire.org Fri Apr 21 18:44:59 2006 From: burner at suppressingfire.org (Michael R. Head) Date: Fri, 21 Apr 2006 18:44:59 -0000 Subject: [Bug 38109] Re: [dapper] g4-based Mac Mini's bcm43xx wireless fails to work References: <20060405013409.25542.83349.malonedeb@gangotri.ubuntu.com> Message-ID: <20060421184459.17643.16410.malone@gandwana.ubuntu.com> Well, I just tried to use the wireless again after a couple weeks, and I can't get it to work anymore. I've tried cold booting and warm booting, but network-manager can't seem to get a dhcp address, it always goes to autoip. -- [dapper] g4-based Mac Mini's bcm43xx wireless fails to work https://launchpad.net/bugs/38109 From danielt at data.homeunix.org Fri Apr 21 18:57:35 2006 From: danielt at data.homeunix.org (DaTa) Date: Fri, 21 Apr 2006 18:57:35 -0000 Subject: [Bug 40623] [dapper] Cannot play sound on USB device through a HUB References: <20060421185735.30538.69210.malonedeb@gangotri.ubuntu.com> Message-ID: <20060421185735.30538.69210.malonedeb@gangotri.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 linux-image-2.6.15-20-386 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: I recently upgraded vom breezy badger to dapper drake. My Logitech USB Headset wasn't working anymore: [1]> cat /vmlinuz > /dev/dsp1 cat: write error: Broken pipe while [1]> cat /vmlinuz > /dev/dsp worked fine. /var/log/kern.log said: Apr 21 20:33:59 localhost kernel: [4362501.009000] cannot submit datapipe for urb 0, error -38: enable CONFIG_USB_EHCI_SPLIT_ISO to play through a hub And yes, my headset is plugged into an external hub. So I plugged it into the root hub and now it works. But it would be nice to compile the kernel with the above option for the final release. ** Description changed: I recently upgraded vom breezy badger to dapper drake. My Logitech USB Headset wasn't working anymore: [1]> cat /vmlinuz > /dev/dsp1 cat: write error: Broken pipe while [1]> cat /vmlinuz > /dev/dsp worked fine. /var/log/kern.log said: Apr 21 20:33:59 localhost kernel: [4362501.009000] cannot submit datapipe for urb 0, error -38: enable CONFIG_USB_EHCI_SPLIT_ISO to play through a hub - And yes, my headset is plugged into a external hub. So I plugged in into - the root hub and now it works. But it would be nice to compile the + And yes, my headset is plugged into an external hub. So I plugged it + into the root hub and now it works. But it would be nice to compile the kernel with the above option for the final release. -- [dapper] Cannot play sound on USB device through a HUB https://launchpad.net/bugs/40623 From beza1e1 at web.de Fri Apr 21 19:00:27 2006 From: beza1e1 at web.de (beza1e1) Date: Fri, 21 Apr 2006 19:00:27 -0000 Subject: [Bug 35101] Re: Wacom support completely broken now References: <20060315201206.6537.5926.malonedeb@gangotri.ubuntu.com> Message-ID: <20060421190027.30538.89476.malone@gangotri.ubuntu.com> I can confirm this problem. Using 2.6.15-20-386 and wacom usb * eraser and stylus can't click * cursor doesn't use relative mode (but X.org thinks so) -- Wacom support completely broken now https://launchpad.net/bugs/35101 From mjg59 at codon.org.uk Fri Apr 21 19:19:22 2006 From: mjg59 at codon.org.uk (Matthew Garrett) Date: Fri, 21 Apr 2006 19:19:22 -0000 Subject: [Bug 35101] Re: Wacom support completely broken now References: <20060315201206.6537.5926.malonedeb@gangotri.ubuntu.com> Message-ID: <20060421191922.17643.36545.malone@gandwana.ubuntu.com> This bug is now fixed, and could never have applied to usb devices. If you have problems with a usb device, please file it separately. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: In Progress => Fix Released -- Wacom support completely broken now https://launchpad.net/bugs/35101 From alexanderjurjens at lycos.nl Fri Apr 21 19:43:08 2006 From: alexanderjurjens at lycos.nl (Alexander Jurjens) Date: Fri, 21 Apr 2006 19:43:08 -0000 Subject: [Bug 20943] Re: module insertion hangs in apic/irq setup References: <20060113141001.21012.82199.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060421194308.30538.98953.malone@gangotri.ubuntu.com> Hello, I've also tried Dapper Beta (with -20 kernel) and the kernel still panics at "Loading hardware drivers...". -- module insertion hangs in apic/irq setup https://launchpad.net/bugs/20943 From onerobot at gmail.com Fri Apr 21 19:59:37 2006 From: onerobot at gmail.com (John Simpkins) Date: Fri, 21 Apr 2006 19:59:37 -0000 Subject: [Bug 34958] Re: IRQ 11 disabled, no network, desktop / kernel freeze (Averatec laptop) - regression from Breezy References: <20060314220405.17018.47701.malonedeb@gangotri.ubuntu.com> Message-ID: <20060421195937.17643.85682.launchpad@gandwana.ubuntu.com> ** Changed in: linux-source-2.6.15 linux-image-2.6.15-18-386 (Ubuntu) Status: Needs Info => Confirmed -- IRQ 11 disabled, no network, desktop / kernel freeze (Averatec laptop) - regression from Breezy https://launchpad.net/bugs/34958 From sitsofe at yahoo.com Fri Apr 21 20:32:01 2006 From: sitsofe at yahoo.com (Sitsofe Wheeler) Date: Fri, 21 Apr 2006 20:32:01 -0000 Subject: [Bug 37056] Re: There should be several nVIDIA driver packages References: <20060328193442.6253.19683.malonedeb@gandwana.ubuntu.com> Message-ID: <20060421203201.30538.13546.malone@gangotri.ubuntu.com> I guess I am approaching things from a more "blunt" angle. Everyone needs to use the latest drivers possible (so legacy cards need one set and every other card can use one set) to avoid precisely this situation. Old drivers simply aren't going to have all the possible fixes and some of those fixes could be security ones... If newer drivers break when they shouldn't then NVIDIA need to be informed by whoever sees the breakage so they can fix it next time round. Multiple versions of the "same" driver is going to be packaging and user nightmare... -- There should be several nVIDIA driver packages https://launchpad.net/bugs/37056 From varenet at parisc-linux.org Fri Apr 21 21:05:44 2006 From: varenet at parisc-linux.org (T-Bone) Date: Fri, 21 Apr 2006 21:05:44 -0000 Subject: [Bug 40286] Re: [ia64] OOPS when accessing /sys/class/misc/efirtc/uvent References: <20060420083030.8468.20650.malonedeb@gandwana.ubuntu.com> Message-ID: <20060421210544.17643.58401.malone@gandwana.ubuntu.com> I'm seeing this one too. It seems to be triggered by udevplug (at least that's what the backlog seems to suggest). I managed to get past this by loading necessary modules by hand, but i'm unfortunately stuck in partman not willing to acknowledge my partition scheme so far :P HTH T-Bone -- [ia64] OOPS when accessing /sys/class/misc/efirtc/uvent https://launchpad.net/bugs/40286 From slavik at lbdsl.net Fri Apr 21 21:16:42 2006 From: slavik at lbdsl.net (slavik) Date: Fri, 21 Apr 2006 21:16:42 -0000 Subject: [Bug 30487] When booting Breezy or Dapper in recovery console it scrolls "azx_get_response timeout" error message. References: <20060204161345.11709.55486.malonedeb@gandwana.ubuntu.com> Message-ID: <20060421211642.30538.68936.launchpad@canonical@gangotri.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Fix Released Description: Compaq Presario V2000Z laptop. Installation of Breezy or Dapper goes fine. When trying yo boot either, they freeze' Breezy: Stops at "Starting Hotplug subsystem..." I tried using 'acpi=off' option, did not help. Tried 'noapic nolapic' options, that did not work either. Dapper: Hangs for a minute on "Setting up ALSA card 0..." Then it shoulds a failed status and stops on "Loading modules..." Tried 'linux acpi=off' option, but that did not help. The system chipset is ATI Xpress 200M. Here is the output from 'lspci -v' as ran from Knoppix LiveDVD 4.0.2 (which boots fine): 0000:00:00.0 Host bridge: ATI Technologies Inc: Unknown device 5950 (rev 10) Subsystem: Hewlett-Packard Company: Unknown device 3091 Flags: bus master, 66MHz, medium devsel, latency 64 0000:00:01.0 PCI bridge: ATI Technologies Inc: Unknown device 5a3f (prog-if 00 [Normal decode]) Flags: bus master, 66MHz, medium devsel, latency 64 Bus: primary=00, secondary=01, subordinate=01, sec-latency=64 I/O behind bridge: 00009000-00009fff Memory behind bridge: c0100000-c01fffff Prefetchable memory behind bridge: 00000000c8000000-00000000cff00000 Capabilities: 0000:00:13.0 USB Controller: ATI Technologies Inc: Unknown device 4374 (rev 80) (prog-if 10 [OHCI]) Subsystem: Hewlett-Packard Company: Unknown device 3091 Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 19 Memory at c0004000 (32-bit, non-prefetchable) [size=4K] Capabilities: 0000:00:13.1 USB Controller: ATI Technologies Inc: Unknown device 4375 (rev 80) (prog-if 10 [OHCI]) Subsystem: Hewlett-Packard Company: Unknown device 3091 Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 19 Memory at c0005000 (32-bit, non-prefetchable) [size=4K] Capabilities: 0000:00:13.2 USB Controller: ATI Technologies Inc: Unknown device 4373 (rev 80) (prog-if 20 [EHCI]) Subsystem: Hewlett-Packard Company: Unknown device 3091 Flags: 66MHz, medium devsel, IRQ 11 Memory at c0006000 (32-bit, non-prefetchable) [size=4K] Capabilities: 0000:00:14.0 SMBus: ATI Technologies Inc: Unknown device 4372 (rev 81) Subsystem: Hewlett-Packard Company: Unknown device 3091 Flags: 66MHz, medium devsel I/O ports at 8400 [size=16] Memory at c0007000 (32-bit, non-prefetchable) [size=1K] Capabilities: 0000:00:14.1 IDE interface: ATI Technologies Inc: Unknown device 4376 (rev 80) (prog-if 8a [Master SecP PriP]) Subsystem: Hewlett-Packard Company: Unknown device 3091 Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 16 I/O ports at I/O ports at I/O ports at I/O ports at I/O ports at 8410 [size=16] Capabilities: 0000:00:14.2 0403: ATI Technologies Inc: Unknown device 437b (rev 01) Flags: slow devsel, IRQ 5 Memory at c0000000 (64-bit, non-prefetchable) [size=16K] Capabilities: 0000:00:14.3 ISA bridge: ATI Technologies Inc: Unknown device 4377 (rev 80) Subsystem: Hewlett-Packard Company: Unknown device 3091 Flags: bus master, 66MHz, medium devsel, latency 0 0000:00:14.4 PCI bridge: ATI Technologies Inc: Unknown device 4371 (rev 80) (prog-if 01 [Subtractive decode]) Flags: bus master, 66MHz, medium devsel, latency 64 Bus: primary=00, secondary=05, subordinate=05, sec-latency=64 I/O behind bridge: 0000a000-0000afff Memory behind bridge: c0200000-c02fffff 0000:00:14.5 Multimedia audio controller: ATI Technologies Inc: Unknown device 4370 (rev 80) Subsystem: Hewlett-Packard Company: Unknown device 3091 Flags: bus master, 66MHz, slow devsel, latency 64, IRQ 17 Memory at c0007400 (32-bit, non-prefetchable) [size=256] Capabilities: 0000:00:14.6 Modem: ATI Technologies Inc: Unknown device 4378 (rev 80) (prog-if 00 [Generic]) Subsystem: Hewlett-Packard Company: Unknown device 3091 Flags: bus master, 66MHz, slow devsel, latency 64, IRQ 10 Memory at c0007800 (32-bit, non-prefetchable) [size=256] Capabilities: 0000:00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge Flags: fast devsel Capabilities: 0000:00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge Flags: fast devsel 0000:00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge Flags: fast devsel 0000:00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge Flags: fast devsel 0000:01:05.0 VGA compatible controller: ATI Technologies Inc: Unknown device 5955 (prog-if 00 [VGA]) Subsystem: Hewlett-Packard Company: Unknown device 3091 Flags: bus master, 66MHz, medium devsel, latency 66, IRQ 10 Memory at c8000000 (32-bit, prefetchable) [size=128M] I/O ports at 9000 [size=256] Memory at c0100000 (32-bit, non-prefetchable) [size=64K] Capabilities: 0000:05:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) Subsystem: Hewlett-Packard Company: Unknown device 3091 Flags: bus master, medium devsel, latency 64, IRQ 18 I/O ports at a000 [size=256] Memory at c0208000 (32-bit, non-prefetchable) [size=256] Capabilities: 0000:05:02.0 Network controller: Broadcom Corporation: Unknown device 4318 (rev 02) Subsystem: Hewlett-Packard Company: Unknown device 1355 Flags: bus master, fast devsel, latency 64, IRQ 4 Memory at c0204000 (32-bit, non-prefetchable) [size=8K] 0000:05:09.0 CardBus bridge: Texas Instruments: Unknown device 8031 Subsystem: Hewlett-Packard Company: Unknown device 3091 Flags: bus master, medium devsel, latency 168, IRQ 17 Memory at 30000000 (32-bit, non-prefetchable) [size=4K] Bus: primary=05, secondary=06, subordinate=09, sec-latency=176 Memory window 0: 30400000-307ff000 (prefetchable) Memory window 1: 30800000-30bff000 I/O window 0: 00004000-000040ff I/O window 1: 00004400-000044ff 16-bit legacy interface ports at 0001 -- When booting Breezy or Dapper in recovery console it scrolls "azx_get_response timeout" error message. https://launchpad.net/bugs/30487 From crimsun at fungus.sh.nu Fri Apr 21 21:16:41 2006 From: crimsun at fungus.sh.nu (Daniel T. Chen) Date: Fri, 21 Apr 2006 21:16:41 -0000 Subject: [Bug 30487] Re: When booting Breezy or Dapper in recovery console it scrolls "azx_get_response timeout" error message. References: <20060204161345.11709.55486.malonedeb@gandwana.ubuntu.com> Message-ID: <20060421211642.30538.29529.launchpad@gangotri.ubuntu.com> *** This bug is a duplicate of bug 27122 *** ** Changed in: Ubuntu Sourcepackagename: None => linux-source-2.6.15 Status: Unconfirmed => Fix Released ** This bug has been marked a duplicate of bug 27122 hda_intel: Endless loop causes system to lockup on boot -- When booting Breezy or Dapper in recovery console it scrolls "azx_get_response timeout" error message. https://launchpad.net/bugs/30487 From filcab at gmail.com Fri Apr 21 21:20:12 2006 From: filcab at gmail.com (FilCab) Date: Fri, 21 Apr 2006 21:20:12 -0000 Subject: [Bug 37056] Re: [Bug 37056] Re: There should be several nVIDIA driver packages References: <20060328193442.6253.19683.malonedeb@gandwana.ubuntu.com> <20060421203201.30538.13546.malone@gangotri.ubuntu.com> Message-ID: There's a problem when you have a "newer" card that: 1 - Has a bug with the latest drivers 2 - Doesn't work with the legacy drivers (that are like... some years old, I guess). Also, you'r making it harder to upgrade just a driver from the restricted modules. What if you have an issue with the latest X restricted kernel module and only the latest Y restricted kernel module works with your HW? On 4/21/06, Sitsofe Wheeler wrote: > I guess I am approaching things from a more "blunt" angle. Everyone > needs to use the latest drivers possible (so legacy cards need one set > and every other card can use one set) to avoid precisely this situation. > Old drivers simply aren't going to have all the possible fixes and some > of those fixes could be security ones... If newer drivers break when > they shouldn't then NVIDIA need to be informed by whoever sees the > breakage so they can fix it next time round. Multiple versions of the > "same" driver is going to be packaging and user nightmare... > > -- > There should be several nVIDIA driver packages > https://launchpad.net/bugs/37056 > -- There should be several nVIDIA driver packages https://launchpad.net/bugs/37056 From crimsun at fungus.sh.nu Fri Apr 21 21:20:40 2006 From: crimsun at fungus.sh.nu (Daniel T. Chen) Date: Fri, 21 Apr 2006 21:20:40 -0000 Subject: [Bug 27122] Re: hda_intel: Endless loop causes system to lockup on boot References: <20060113145301.21012.37897.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060421212040.30501.92169.malone@gangotri.ubuntu.com> Fixes applied in Dapper kernel. ** Bug 30487 has been marked a duplicate of this bug ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Confirmed => Fix Released -- hda_intel: Endless loop causes system to lockup on boot https://launchpad.net/bugs/27122 From varenet at parisc-linux.org Fri Apr 21 21:29:26 2006 From: varenet at parisc-linux.org (T-Bone) Date: Fri, 21 Apr 2006 21:29:26 -0000 Subject: [Bug 40286] Re: [ia64] OOPS when accessing /sys/class/misc/efirtc/uvent References: <20060420083030.8468.20650.malonedeb@gandwana.ubuntu.com> Message-ID: <20060421212926.30501.59939.launchpad@gangotri.ubuntu.com> ** Attachment added: "installer logs" http://librarian.launchpad.net/2260620/ia64dapperbetalogs.tgz -- [ia64] OOPS when accessing /sys/class/misc/efirtc/uvent https://launchpad.net/bugs/40286 From crimsun at fungus.sh.nu Fri Apr 21 21:30:52 2006 From: crimsun at fungus.sh.nu (Daniel T. Chen) Date: Fri, 21 Apr 2006 21:30:52 -0000 Subject: [Bug 34831] Re: Hardlock of entire system (Dapper Flight 5) References: <20060314003317.30057.9117.malonedeb@gandwana.ubuntu.com> Message-ID: <20060421213052.17670.94043.launchpad@gandwana.ubuntu.com> ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Confirmed => In Progress -- Hardlock of entire system (Dapper Flight 5) https://launchpad.net/bugs/34831 From James.Trotter at gmail.com Fri Apr 21 22:05:52 2006 From: James.Trotter at gmail.com (James Trotter) Date: Fri, 21 Apr 2006 22:05:52 -0000 Subject: [Bug 40654] Unable to open device /dev/dsp for writing: Device or resource busy References: <20060421220552.30501.30267.malonedeb@gangotri.ubuntu.com> Message-ID: <20060421220552.30501.30267.malonedeb@gangotri.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: I'm using Dapper Drake Flight 6, and have a nforce3 with a nvidia CK8S on-board sound card. When I run gstreamer-properties and test the OSS output plugin an error occurs: "OSS - Open Sound System: Unable to open device /dev/dsp for writing: Device or resource busy" The following message is printed in the terminal: gstreamer-properties-Message: Error running pipeline 'OSS - Open Sound System': Unable to open device /dev/dsp for writing: Device or resource busy [gstosssink.c(388): gst_oss_sink_open (): /pipeline4/osssink3] But the error only occurs the first time I test the OSS plugin after testing ESD. The same error also occured when I tried to run a program that uses openal: "Unable to open device /dev/dsp for writing: Device or resource busy" -- Unable to open device /dev/dsp for writing: Device or resource busy https://launchpad.net/bugs/40654 From siretart at tauware.de Fri Apr 21 22:28:40 2006 From: siretart at tauware.de (Reinhard Tartler) Date: Fri, 21 Apr 2006 22:28:40 -0000 Subject: [Bug 35213] Re: hibernate fails when not on AC power on HP Pavilion ZT3000 - regression from breezy References: <20060316170910.6510.54248.malonedeb@gangotri.ubuntu.com> Message-ID: <20060421222840.17670.81972.malone@gandwana.ubuntu.com> I can confirm this on this machine: https://wiki.ubuntu.com/LaptopTestingTeam/ThinkpadR50e Hibernating without AC plugged in takes more than 10 minutes! -- hibernate fails when not on AC power on HP Pavilion ZT3000 - regression from breezy https://launchpad.net/bugs/35213 From jmsunseri at gmail.com Fri Apr 21 22:36:36 2006 From: jmsunseri at gmail.com (Justin Sunseri) Date: Fri, 21 Apr 2006 22:36:36 -0000 Subject: [Bug 40662] pulling plug on laptop with battery connected causes laptop to suspend References: <20060421223636.17670.50725.malonedeb@gandwana.ubuntu.com> Message-ID: <20060421223636.17670.50725.malonedeb@gandwana.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 linux-image-2.6.15-20-686 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: lenovo 3000 n100 laptop with dapper flight 6 + updates. the battery is fully charged and the cord is plugged in. when i unplug the power cord instead of dimming the display the laptop goes to suspend. -- pulling plug on laptop with battery connected causes laptop to suspend https://launchpad.net/bugs/40662 From crimsun at fungus.sh.nu Fri Apr 21 23:01:08 2006 From: crimsun at fungus.sh.nu (Daniel T. Chen) Date: Fri, 21 Apr 2006 23:01:08 -0000 Subject: [Bug 34831] Re: Hardlock of entire system (Dapper Flight 5) References: <20060314003317.30057.9117.malonedeb@gandwana.ubuntu.com> Message-ID: <20060421230109.30501.36310.malone@gangotri.ubuntu.com> https://lists.ubuntu.com/archives/kernel-team/2006-April/000848.html https://lists.ubuntu.com/archives/kernel-team/2006-April/000849.html ** Changed in: linux-source-2.6.15 (Ubuntu) Status: In Progress => Fix Committed -- Hardlock of entire system (Dapper Flight 5) https://launchpad.net/bugs/34831 From varenet at parisc-linux.org Sat Apr 22 00:02:37 2006 From: varenet at parisc-linux.org (T-Bone) Date: Sat, 22 Apr 2006 00:02:37 -0000 Subject: [Bug 31730] Re: JFS is flakey References: <20060217052633.795.42803.malonedeb@gandwana.ubuntu.com> Message-ID: <20060422000237.17670.81639.malone@gandwana.ubuntu.com> ia64 with IDE HD. Fresh Dapper Beta install, completely ruined after a few minutes (corrupted/deleted files everywhere, dpkg db corrupted, gnome unable to start, etc...). Had to reinstall the box. Ubuntu may not use JFS by default but the Ubuntu kernel provides support for it, so it might be a good idea to disable it if it's so buggy and nobody cares? HTH T-Bone -- JFS is flakey https://launchpad.net/bugs/31730 From nigelenki at comcast.net Sat Apr 22 01:04:05 2006 From: nigelenki at comcast.net (John Moser) Date: Sat, 22 Apr 2006 01:04:05 -0000 Subject: [Bug 31730] Re: JFS is flakey References: <20060217052633.795.42803.malonedeb@gandwana.ubuntu.com> Message-ID: <20060422010405.17643.28694.malone@gandwana.ubuntu.com> I was thinking warning in the installer. "You have chose to format the below partitions as JFS. JFS IS VERY UNSTABLE. ARE YOU SURE YOU WANT TO DO THIS?" -- JFS is flakey https://launchpad.net/bugs/31730 From JohnnyJIV at gmail.com Sat Apr 22 04:32:54 2006 From: JohnnyJIV at gmail.com (Johnny Jelinek IV) Date: Sat, 22 Apr 2006 04:32:54 -0000 Subject: [Bug 12637] Re: LCD Brightness on Laptop Always Set Very Low at Boot References: <20060113132646.21012.81619.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060422043254.17643.23622.malone@gandwana.ubuntu.com> actually -- to me, this is a showstopper :/ sad day. Please fix asap! -- LCD Brightness on Laptop Always Set Very Low at Boot https://launchpad.net/bugs/12637 From airlied at gmail.com Sat Apr 22 06:30:41 2006 From: airlied at gmail.com (airlied) Date: Sat, 22 Apr 2006 06:30:41 -0000 Subject: [Bug 34144] Re: sis 760 + radeon 9250 = no acceleration References: <20060308221458.29403.93806.malonedeb@gangotri.ubuntu.com> Message-ID: <20060422063041.17643.91632.malone@gandwana.ubuntu.com> is this a regression? the AGP aperture is only 4M this is never going to be big enough for the radeon driver.. you should check your BIOS to see if you can increase it.. that or the sis driver is getting the wrong size somehow.. -- sis 760 + radeon 9250 = no acceleration https://launchpad.net/bugs/34144 From sitsofe at yahoo.com Sat Apr 22 08:16:29 2006 From: sitsofe at yahoo.com (Sitsofe Wheeler) Date: Sat, 22 Apr 2006 08:16:29 -0000 Subject: [Bug 37056] Re: There should be several nVIDIA driver packages References: <20060328193442.6253.19683.malonedeb@gandwana.ubuntu.com> Message-ID: <20060422081629.30501.35317.malone@gangotri.ubuntu.com> No one with a newer card should be using the legacy drivers. They exist solely for legacy cards (perhaps NVIDIA will remove the IDs of newer cards in the next release of the legacy drivers to dissuade people from doing so). If newer driver version Y breaks on your card whereas X works you _must_ get in contact with NVIDIA and tell them so. New kernel versions break older versions of the drivers anyway - if there's a problem with new drivers NVIDIA have to be informed so they can fix it. -- There should be several nVIDIA driver packages https://launchpad.net/bugs/37056 From sitsofe at yahoo.com Sat Apr 22 08:41:46 2006 From: sitsofe at yahoo.com (Sitsofe Wheeler) Date: Sat, 22 Apr 2006 08:41:46 -0000 Subject: [Bug 38767] Re: [zd1211] 3com 3crusb10075 usb wifi dongle fails to work References: <20060408175749.32233.21634.malonedeb@gandwana.ubuntu.com> Message-ID: <20060422084146.17643.22612.launchpad@gandwana.ubuntu.com> ** Summary changed: - 3com 3crusb10075 usb wifi dongle fails to work + [zd1211] 3com 3crusb10075 usb wifi dongle fails to work -- [zd1211] 3com 3crusb10075 usb wifi dongle fails to work https://launchpad.net/bugs/38767 From sitsofe at yahoo.com Sat Apr 22 08:48:07 2006 From: sitsofe at yahoo.com (Sitsofe Wheeler) Date: Sat, 22 Apr 2006 08:48:07 -0000 Subject: [Bug 39572] Re: [sky2] Detecting Network card during install. Dapper Flight 6 References: <20060414152316.16443.26974.malonedeb@gandwana.ubuntu.com> Message-ID: <20060422084807.30538.84740.launchpad@gangotri.ubuntu.com> ** Summary changed: - Detecting Network card during install. Dapper Flight 6 + [sky2] Detecting Network card during install. Dapper Flight 6 -- [sky2] Detecting Network card during install. Dapper Flight 6 https://launchpad.net/bugs/39572 From sitsofe at yahoo.com Sat Apr 22 08:53:15 2006 From: sitsofe at yahoo.com (Sitsofe Wheeler) Date: Sat, 22 Apr 2006 08:53:15 -0000 Subject: [Bug 34752] Re: [atmel] breezy->dapper wifi lost: signal power to 0 References: <20060313122743.17044.67675.malonedeb@gangotri.ubuntu.com> Message-ID: <20060422085316.17670.97930.launchpad@gandwana.ubuntu.com> ** Summary changed: - breezy->dapper wifi lost: signal power to 0 + [atmel] breezy->dapper wifi lost: signal power to 0 -- [atmel] breezy->dapper wifi lost: signal power to 0 https://launchpad.net/bugs/34752 From sitsofe at yahoo.com Sat Apr 22 08:57:15 2006 From: sitsofe at yahoo.com (Sitsofe Wheeler) Date: Sat, 22 Apr 2006 08:57:15 -0000 Subject: [Bug 38473] Re: [atheos] DWL-g650 not configurable References: <20060406190702.24516.69199.malonedeb@gangotri.ubuntu.com> Message-ID: <20060422085715.17670.20633.launchpad@gandwana.ubuntu.com> ** Summary changed: - DWL-g650 not configurable + [atheos] DWL-g650 not configurable ** Summary changed: - [atheos] DWL-g650 not configurable + [atheros] DWL-g650 not configurable -- [atheros] DWL-g650 not configurable https://launchpad.net/bugs/38473 From sitsofe at yahoo.com Sat Apr 22 09:07:47 2006 From: sitsofe at yahoo.com (Sitsofe Wheeler) Date: Sat, 22 Apr 2006 09:07:47 -0000 Subject: [Bug 34976] Re: [hostap] Orinoco gold wireless card isn't detected correctly/installed References: <20060315014818.30082.24042.malonedeb@gandwana.ubuntu.com> Message-ID: <20060422090747.30538.87167.launchpad@gangotri.ubuntu.com> ** Summary changed: - Orinoco gold wireless card isn't detected correctly/installed + [hostap] Orinoco gold wireless card isn't detected correctly/installed -- [hostap] Orinoco gold wireless card isn't detected correctly/installed https://launchpad.net/bugs/34976 From sitsofe at yahoo.com Sat Apr 22 09:11:09 2006 From: sitsofe at yahoo.com (Sitsofe Wheeler) Date: Sat, 22 Apr 2006 09:11:09 -0000 Subject: [Bug 34068] Re: [acx111] USR5410 not working References: <20060308120049.10830.52259.malonedeb@gandwana.ubuntu.com> Message-ID: <20060422091109.17670.77441.launchpad@gandwana.ubuntu.com> ** Summary changed: - USR5410 not working + [acx111] USR5410 not working -- [acx111] USR5410 not working https://launchpad.net/bugs/34068 From sitsofe at yahoo.com Sat Apr 22 09:24:07 2006 From: sitsofe at yahoo.com (Sitsofe Wheeler) Date: Sat, 22 Apr 2006 09:24:07 -0000 Subject: [Bug 27604] Re: [madwifi] Thinkpad z60t wifi does not work References: <20060113151824.29386.11733.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060422092407.17670.86185.launchpad@gandwana.ubuntu.com> ** Summary changed: - Thinkpad z60t wifi does not work + [madwifi] Thinkpad z60t wifi does not work -- [madwifi] Thinkpad z60t wifi does not work https://launchpad.net/bugs/27604 From aurelien.naldi at gmail.com Sat Apr 22 09:56:00 2006 From: aurelien.naldi at gmail.com (aurelien naldi) Date: Sat, 22 Apr 2006 09:56:00 -0000 Subject: [Bug 36898] [dapper] can not connect to a wireless network with rt2500 References: <20060327192808.20514.71506.malonedeb@gangotri.ubuntu.com> Message-ID: <20060422095600.17670.91544.launchpad@canonical@gandwana.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 rt2500 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: on an up to date dapper, using the rt2500 driver, the ra0 interface is correctly detected, scanning works fine but I can't actually join a network. I removed all authentification from my AP for testing, it didn't solve anything. Same card/AP works fine with breezy live-cd Once it seemed to connect, it got the right IP address but network was unreachable anyway (I couldn't even ping the AP) I can't run RaConfig2500, it doesn't find the driver (which is loaded!) $ uname -a Linux mem 2.6.15-19-386 #1 PREEMPT Mon Mar 20 16:46:02 UTC 2006 i686 GNU/Linux $ dmesg | grep ra0 [4294721.519000] ra0 (WE) : Driver using old /proc/net/wireless support, please fix driver ! [4294815.024000] ra0: no IPv6 routers present [4294898.422000] ra0: no IPv6 routers present [.....] [4297711.131000] ra0: no IPv6 routers present [4297990.417000] ra0: no IPv6 routers present $ lspci | grep Ralink 0000:01:08.0 Network controller: RaLink Ralink RT2500 802.11 Cardbus Reference Card (rev 01) I don't have any other wifi card to test. -- [dapper] can not connect to a wireless network with rt2500 https://launchpad.net/bugs/36898 From samtygier at yahoo.co.uk Sat Apr 22 09:56:00 2006 From: samtygier at yahoo.co.uk (sam tygier) Date: Sat, 22 Apr 2006 09:56:00 -0000 Subject: [Bug 36898] Re: [dapper] can not connect to a wireless network with rt2500 References: <20060327192808.20514.71506.malonedeb@gangotri.ubuntu.com> Message-ID: <20060422095600.17670.34616.malone@gandwana.ubuntu.com> driver bugs are best filed against the kernel ** Changed in: rt2500 (Ubuntu) Sourcepackagename: rt2500 => linux-source-2.6.15 -- [dapper] can not connect to a wireless network with rt2500 https://launchpad.net/bugs/36898 From cmdetzel at cox.net Sat Apr 22 10:09:42 2006 From: cmdetzel at cox.net (C. Matt Detzel) Date: Sat, 22 Apr 2006 10:09:42 -0000 Subject: [Bug 39391] network causes complete lock up References: <20060413031912.15408.22210.malonedeb@gangotri.ubuntu.com> Message-ID: <20060422100942.17670.3652.launchpad@canonical@gandwana.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Needs Info Description: I'm new at this, so forgive me if I'm not following conventions for posting. Running Flight 6 on an Averatec 3250HX laptop with Rhine II fast ethernet adapter. Also have [but not configured] a Netgear WPN511 card [detected as RT2500]. Network doesn't work whatsoever - I get an IP address, but pinging anything on my local network results in "destination host unreachable"; if I attempt to down eth0 and bring it back up--either through the Gnome Network app or from command line [using sudo ifdown eth0 / ifup eth0]--computer completely locks up, requiring a power down. It downs fine; attempting to bring adapter back up causes the lockup. hardware works fine in breezy and in windows, so I know it's not the cable or adapter. As I can't get internet access from this laptop while in Dapper, I'm running as is, fresh-from-cd Flight 6. I used the defaults during install as well [no expert mode]. any ideas? -- network causes complete lock up https://launchpad.net/bugs/39391 From samtygier at yahoo.co.uk Sat Apr 22 10:04:30 2006 From: samtygier at yahoo.co.uk (sam tygier) Date: Sat, 22 Apr 2006 10:04:30 -0000 Subject: [Bug 36898] Re: [dapper] can not connect to a wireless network with rt2500 References: <20060327192808.20514.71506.malonedeb@gangotri.ubuntu.com> Message-ID: <20060422100430.30501.90958.malone@gangotri.ubuntu.com> i get similar dmesg but my rt2500 card connects and works ok (on a WEP network) dmesg | grep ra0 [ 81.430878] ra0 (WE) : Driver using old /proc/net/wireless support, please fix driver ! [ 2011.779411] ra0: no IPv6 routers present [ 2045.367418] ra0: no IPv6 routers present -- [dapper] can not connect to a wireless network with rt2500 https://launchpad.net/bugs/36898 From samtygier at yahoo.co.uk Sat Apr 22 10:09:41 2006 From: samtygier at yahoo.co.uk (sam tygier) Date: Sat, 22 Apr 2006 10:09:41 -0000 Subject: [Bug 39391] Re: network causes complete lock up References: <20060413031912.15408.22210.malonedeb@gangotri.ubuntu.com> Message-ID: <20060422100942.17670.92575.launchpad@gandwana.ubuntu.com> ** Changed in: Ubuntu Sourcepackagename: None => linux-source-2.6.15 Status: Unconfirmed => Needs Info -- network causes complete lock up https://launchpad.net/bugs/39391 From samtygier at yahoo.co.uk Sat Apr 22 10:13:11 2006 From: samtygier at yahoo.co.uk (sam tygier) Date: Sat, 22 Apr 2006 10:13:11 -0000 Subject: [Bug 24361] Re: pcmcia Ralink RT2500 driver freezes laptop while working on batteries References: <20060113142841.21012.64686.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060422101311.17643.59492.malone@gandwana.ubuntu.com> is this still occuring? -- pcmcia Ralink RT2500 driver freezes laptop while working on batteries https://launchpad.net/bugs/24361 From James.Trotter at gmail.com Sat Apr 22 10:43:08 2006 From: James.Trotter at gmail.com (James Trotter) Date: Sat, 22 Apr 2006 10:43:08 -0000 Subject: [Bug 40654] Re: Unable to open device /dev/dsp for writing: Device or resource busy References: <20060421220552.30501.30267.malonedeb@gangotri.ubuntu.com> Message-ID: <20060422104308.30538.41721.launchpad@gangotri.ubuntu.com> ** Attachment added: "lspci output" http://librarian.launchpad.net/2265334/lspci ** Attachment added: "lsmod output" http://librarian.launchpad.net/2265335/lsmod -- Unable to open device /dev/dsp for writing: Device or resource busy https://launchpad.net/bugs/40654 From samtygier at yahoo.co.uk Sat Apr 22 10:43:57 2006 From: samtygier at yahoo.co.uk (sam tygier) Date: Sat, 22 Apr 2006 10:43:57 -0000 Subject: [Bug 40731] wont resume with rt2500 on powerbook References: <20060422104357.30538.4454.malonedeb@gangotri.ubuntu.com> Message-ID: <20060422104357.30538.4454.malonedeb@gangotri.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: my powerbook G4 is failing to resume with a belkin F5D7010 802.11g wireless pcmcia card, which uses the rt2500 driver. ** Attachment added: "photo of screen" http://librarian.launchpad.net/2265336/crash.JPG -- wont resume with rt2500 on powerbook https://launchpad.net/bugs/40731 From samtygier at yahoo.co.uk Sat Apr 22 10:46:00 2006 From: samtygier at yahoo.co.uk (sam tygier) Date: Sat, 22 Apr 2006 10:46:00 -0000 Subject: [Bug 40731] Re: wont resume with rt2500 on powerbook References: <20060422104357.30538.4454.malonedeb@gangotri.ubuntu.com> Message-ID: <20060422104600.17670.58298.malone@gandwana.ubuntu.com> this is in an upto date dapper. $uname -a Linux titania 2.6.15-20-powerpc #1 Tue Apr 4 17:47:49 UTC 2006 ppc GNU/Linux -- wont resume with rt2500 on powerbook https://launchpad.net/bugs/40731 From aurelien.naldi at gmail.com Sat Apr 22 11:59:09 2006 From: aurelien.naldi at gmail.com (aurelien naldi) Date: Sat, 22 Apr 2006 11:59:09 -0000 Subject: [Bug 36898] Re: [dapper] can not connect to a wireless network with rt2500 References: <20060327192808.20514.71506.malonedeb@gangotri.ubuntu.com> Message-ID: <20060422115909.17643.90123.malone@gandwana.ubuntu.com> Ok it was a problem with my setup: Strangly I managed to get a DHCP lease but I can't do anything withe this connection, not even ping myself and the connection info shows tons of errors: $ ifconfig ra0 ra0 Lien encap:Ethernet HWaddr 00:11:09:F7:C2:0C UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:23 errors:0 dropped:0 overruns:0 frame:0 TX packets:83234 errors:3337 dropped:3337 overruns:0 carrier:0 collisions:13966 lg file transmission:1000 RX bytes:5258 (5.1 KiB) TX bytes:7670926 (7.3 MiB) Interruption:82 Adresse de base:0x8000 $ ping 139.124.1.101 PING 139.124.1.101 (139.124.1.101) 56(84) bytes of data. ping: sendmsg: Operation not permitted ping: sendmsg: Operation not permitted ping: sendmsg: Operation not permitted nor dmesg nor syslog contains anything more regarding ra0 or the driver. the problem was a running firestarter, the connection was obviously working fine, sorry for the noise, marking the bug as "rejected" as it was not a bug and I don't see a better status. -- [dapper] can not connect to a wireless network with rt2500 https://launchpad.net/bugs/36898 From aurelien.naldi at gmail.com Sat Apr 22 12:00:14 2006 From: aurelien.naldi at gmail.com (aurelien naldi) Date: Sat, 22 Apr 2006 12:00:14 -0000 Subject: [Bug 36898] Re: [dapper] can not connect to a wireless network with rt2500 References: <20060327192808.20514.71506.malonedeb@gangotri.ubuntu.com> Message-ID: <20060422120014.30501.44388.malone@gangotri.ubuntu.com> was not a bug but a configuration problem ** Changed in: linux-source-2.6.15 rt2500 (Ubuntu) Status: Unconfirmed => Rejected -- [dapper] can not connect to a wireless network with rt2500 https://launchpad.net/bugs/36898 From c.elkjaer at gmail.com Sat Apr 22 12:11:22 2006 From: c.elkjaer at gmail.com (Christian Elkjaer) Date: Sat, 22 Apr 2006 12:11:22 -0000 Subject: [Bug 12483] Re: laptop-mode/IDE-APM hang on various laptops References: <20060113132548.21012.74332.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060422121122.17643.10679.malone@gandwana.ubuntu.com> Just to let you know.. I am testing the beta release of Dapper on my laptop (clean re-install on a Thinkpad T41) and within half an hour I saw this bug. Consequently I may have to disable laptop-mode manually as I did with Dapper Flight 4, 5 and 6 to be able to work. Perhaps it should be considered disabling laptop-mode for the final release of Dapper as with Breezy if no solutions are coming up. -- laptop-mode/IDE-APM hang on various laptops https://launchpad.net/bugs/12483 From c.elkjaer at gmail.com Sat Apr 22 12:15:42 2006 From: c.elkjaer at gmail.com (Christian Elkjaer) Date: Sat, 22 Apr 2006 12:15:42 -0000 Subject: [Bug 12483] Re: laptop-mode/IDE-APM hang on various laptops References: <20060113132548.21012.74332.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060422121542.30538.26913.malone@gangotri.ubuntu.com> I forgot to add: I am talking about the kernel 2.6.15-20-386 and acpi-support version 0.71. -- laptop-mode/IDE-APM hang on various laptops https://launchpad.net/bugs/12483 From mdz at ubuntu.com Sat Apr 22 12:36:02 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Sat, 22 Apr 2006 12:36:02 -0000 Subject: [Bug 12483] Re: [Bug 12483] Re: laptop-mode/IDE-APM hang on various laptops References: <20060113132548.21012.74332.launchpad@macquarie.warthogs.hbd.com> <20060422121122.17643.10679.malone@gandwana.ubuntu.com> Message-ID: <20060422123602.GZ7344@alcor.net> On Sat, Apr 22, 2006 at 12:11:22PM -0000, Christian Elkjaer wrote: > Just to let you know.. > > I am testing the beta release of Dapper on my laptop (clean re-install on > a Thinkpad T41) and within half an hour I saw this bug. Consequently I may > have to disable laptop-mode manually as I did with Dapper Flight 4, 5 and > 6 to be able to work. > > Perhaps it should be considered disabling laptop-mode for the final > release of Dapper as with Breezy if no solutions are coming up. Eek, I didn't realize this was still enabled by default. I disabled it locally ages ago, of course. Disabled for now: acpi-support (0.72) dapper; urgency=low * Re-disable laptop-mode by default, to work around LP#12483 - Has the pleasant side effect of making the comment match the code -- Matt Zimmerman Sat, 22 Apr 2006 05:34:12 -0700 If someone is able to isolate which hardware configurations are affected, we can be more selective, but until then (or until the underlying bug is fixed), I don't see that we have a choice. -- - mdz -- laptop-mode/IDE-APM hang on various laptops https://launchpad.net/bugs/12483 From Christian at draugr.de Sat Apr 22 12:50:59 2006 From: Christian at draugr.de (=?utf-8?q?Christian_Dr=C3=B6ge?=) Date: Sat, 22 Apr 2006 12:50:59 -0000 Subject: [Bug 31527] Re: DRI locks up the machine when starting X on a Radeon 9250 References: <20060215163856.15884.24165.malonedeb@gangotri.ubuntu.com> Message-ID: <20060422125059.17643.85087.malone@gandwana.ubuntu.com> I have the same issue with: * Dapper with a current kernel (linux-image-2.6.15-21-amd64-k8) running on 64 bit * Radeon 9250 with 128 MB from Powercolor * Asus K8V Deluxe mainboard (K8T800, amd64...) Everything works well until I activate DRI in the module section in the xorg.conf. Maybe there is something helpful in my Xorg.0.log after activating DRI... (-> http://draugr.de/Xorg.0.log). The fix posted by ath in the second comment didn't help here... but within the next few days I will try a drm snapshot... After modprobing drm and radeon (the official ones) dmesg says nothing about the card (it should): [...] [ 957.997784] [drm] Initialized drm 1.0.0 20040925 [ 960.617552] GSI 21 sharing vector 0xD1 and IRQ 21 [ 960.617628] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 209 [ 960.618018] [drm] Initialized radeon 1.19.0 20050911 on minor 0: #### lspci -vv #### [...] 0000:01:00.0 VGA compatible controller: ATI Technologies Inc RV280 [Radeon 9200 PRO] (rev 01) (prog-if 00 [VGA]) Subsystem: C.P. Technology Co. Ltd: Unknown device 2094 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- 0000:01:00.1 Display controller: ATI Technologies Inc: Unknown device 5940 (rev 01) Subsystem: C.P. Technology Co. Ltd: Unknown device 2095 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- -- DRI locks up the machine when starting X on a Radeon 9250 https://launchpad.net/bugs/31527 From rkimber at ntlworld.com Sat Apr 22 13:17:53 2006 From: rkimber at ntlworld.com (Rkimber) Date: Sat, 22 Apr 2006 13:17:53 -0000 Subject: [Bug 40736] kernel oops with dpkg References: <20060422112557.17670.63564.malonedeb@gandwana.ubuntu.com> Message-ID: <20060422131753.17670.31740.launchpad@canonical@gandwana.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: I'm running Dapper flight 6 + updates on an MSI K8T Master2-FAR 2GB There seems to have been an oops during today's update:- Apr 22 10:28:17 infinity kernel: [77988.542114] Unable to handle kernel NULL pointer dereference at 0000000000000000 RIP: Apr 22 10:28:17 infinity kernel: [77988.542126] <0000000000000000>{_stext+2146431208} Apr 22 10:28:17 infinity kernel: [77988.542138] PGD 77444067 PUD 400dd067 PMD 0 Apr 22 10:28:17 infinity kernel: [77988.542144] Oops: 0010 [1] PREEMPT SMP Apr 22 10:28:17 infinity kernel: [77988.542148] CPU 0 Apr 22 10:28:17 infinity kernel: [77988.542151] Modules linked in: ext2 binfmt_misc ipt_limit iptable_mangle ipt_LOG ipt_MASQUERADE ip_nat ipt_TOS ipt_REJECT ip_conntrack_irc ip_conntrack_ftp ipt_state ip_conntrack nfnetlink iptable_filter ip_tables video tc1100_wmi sony_acpi pcc_acpi hotkey dev_acpi container button acpi_sbs battery ac i2c_acpi_ec nls_iso8859_1 nls_cp437 vfat fat ipv6 dm_mod md_mod w83627hf hwmon_vid eeprom i2c_isa lp snd_seq_dummy snd_seq_oss snd_seq_midi snd_seq_midi_event snd_seq tsdev parport_pc parport snd_via82xx psmouse gameport serio_raw pcspkr rtc snd_ac97_codec snd_ac97_bus snd_pcm_oss snd_mixer_oss snd_pcm snd_timer snd_page_alloc snd_mpu401_uart snd_rawmidi snd_seq_device nvidia snd i2c_viapro i2c_core soundcore shpchp pci_hotplug tg3 sg sd_mod evdev ext3 jbd usb_storage scsi_mod ide_generic ehci_hcd uhci_hcd usbcore ide_disk via82cxxx generic ide_cd cdrom pdc202xx_new thermal processor fan capability commoncap vga16fb cfbcopyarea vgastate cfbimgblt cfbfillrect fbcon tileblit font bi Apr 22 10:28:17 infinity kernel: blit softcursor Apr 22 10:28:17 infinity kernel: [77988.542208] Pid: 25684, comm: dpkg Tainted: P 2.6.15-20-amd64-generic #1 Apr 22 10:28:17 infinity kernel: [77988.542211] RIP: 0010:[<0000000000000000>] <0000000000000000>{_stext+2146431208} Apr 22 10:28:17 infinity kernel: [77988.542217] RSP: 0018:ffff810043f4df48 EFLAGS: 00010292 Apr 22 10:28:17 infinity kernel: [77988.542222] RAX: 0000000000004000 RBX: ffff81007fb104c0 RCX: 0000000000000000 Apr 22 10:28:17 infinity kernel: [77988.542226] RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffff8100420fbaa8 Apr 22 10:28:17 infinity kernel: [77988.542230] RBP: 0000000000008000 R08: ffff8100420fbaa8 R09: 0000000000000000 Apr 22 10:28:17 infinity kernel: [77988.542234] R10: 0000000000000001 R11: 0000000000000000 R12: fffffffffffffff7 Apr 22 10:28:17 infinity kernel: [77988.542238] R13: 000000000230eef0 R14: 00000000022583d0 R15: 0000000000008000 Apr 22 10:28:17 infinity kernel: [77988.542243] FS: 00002aaaaadfb6d0(0000) GS:ffffffff80446800(0000) knlGS:0000000000000000 Apr 22 10:28:17 infinity kernel: [77988.542247] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b Apr 22 10:28:17 infinity kernel: [77988.542250] CR2: 0000000000000000 CR3: 0000000040f91000 CR4: 00000000000006e0 Apr 22 10:28:17 infinity kernel: [77988.542256] Process dpkg (pid: 25684, threadinfo ffff810043f4c000, task ffff810051c18fc0) Apr 22 10:28:17 infinity kernel: [77988.542259] Stack: ffff810035676488 ffffffff8018f479 0000000000000000 00000000000004ec Apr 22 10:28:17 infinity kernel: [77988.542267] 000000000000002a 000000000073e3d0 00000000022ea178 ffffffff8010fede Apr 22 10:28:17 infinity kernel: [77988.542273] 0000000000000246 0000000002258440 Apr 22 10:28:17 infinity kernel: [77988.542277] Call Trace:{do_fsync+153} {system_call+126} Apr 22 10:28:17 infinity kernel: [77988.542303] Apr 22 10:28:17 infinity kernel: [77988.542318] Apr 22 10:28:17 infinity kernel: [77988.542319] Code: Bad RIP value. Apr 22 10:28:17 infinity kernel: [77988.542322] RIP <0000000000000000>{_stext+2146431208} RSP Apr 22 10:28:17 infinity kernel: [77988.542328] CR2: 0000000000000000 Apr 22 10:28:38 infinity kernel: [77988.542331] <3>ibm_acpi: ec object not found -- kernel oops with dpkg https://launchpad.net/bugs/40736 From john.dong at gmail.com Sat Apr 22 13:13:54 2006 From: john.dong at gmail.com (John Dong) Date: Sat, 22 Apr 2006 13:13:54 -0000 Subject: [Bug 35741] Re: Wrong module directory used when loading i915_dri.so ? References: <20060320165822.22884.84072.malonedeb@gangotri.ubuntu.com> Message-ID: <20060422131354.30538.27766.malone@gangotri.ubuntu.com> A silly proposition, but Gentoo uses a mechanism similar to our /etc/alternatives to switch GLX/TLS symlinks between Mesa and NVidia. Could we implement something like that, so users can use something like update-alternatives --config opengl to switch between different GLX implementations? I'll have to say that the way nvidia-glx overwrites symlinks is kind of crude :-) -- Wrong module directory used when loading i915_dri.so ? https://launchpad.net/bugs/35741 From samtygier at yahoo.co.uk Sat Apr 22 13:17:52 2006 From: samtygier at yahoo.co.uk (sam tygier) Date: Sat, 22 Apr 2006 13:17:52 -0000 Subject: [Bug 40736] Re: kernel oops with dpkg References: <20060422112557.17670.63564.malonedeb@gandwana.ubuntu.com> Message-ID: <20060422131752.17670.53624.launchpad@gandwana.ubuntu.com> ** Changed in: Ubuntu Sourcepackagename: None => linux-source-2.6.15 -- kernel oops with dpkg https://launchpad.net/bugs/40736 From pprooi at xs4all.nl Sat Apr 22 14:15:14 2006 From: pprooi at xs4all.nl (Pieter van Prooijen) Date: Sat, 22 Apr 2006 14:15:14 -0000 Subject: [Bug 40762] zd1201 usb wireless stick driver firmware missing in dapper drake flight 5 References: <20060422133216.30501.64821.malonedeb@gangotri.ubuntu.com> Message-ID: <20060422141514.30538.22295.launchpad@canonical@gangotri.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: On the live dapper cd (I've only tested dapper drake flight 5 live cd), the firmware for the zd1201 usb wireless stick driver is missing. The driver itself is present in the kernel. Strangely, the firmware for the current gen chip (zd1211) is present. Downloading the firmware from sourceforge http://prdownloads.sourceforge.net/linux- lc100020/zd1201-0.14-fw.tar.gz?download and installing it in /lib/hotplug/firmware// allows the driver to function correctly. I'm not sure if the firmware is freely redistributable, but seeing that the zd1211 firmware is incorporated, it shouldn't be a problem to include this. Don't know how the firmware should be packaged. -- zd1201 usb wireless stick driver firmware missing in dapper drake flight 5 https://launchpad.net/bugs/40762 From htinnocent at gmail.com Sat Apr 22 14:19:31 2006 From: htinnocent at gmail.com (htinn) Date: Sat, 22 Apr 2006 14:19:31 -0000 Subject: [Bug 37370] Crash/freeze when restarting networking, rt2570 wireless USB (DWL-G122, rev B1) References: <20060330180253.23733.49082.malonedeb@gandwana.ubuntu.com> Message-ID: <20060422141931.17643.62768.launchpad@canonical@gandwana.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: If I do the following: sudo /etc/init.d/networking stop sudo /etc/init.d/networking start the computer will lock solid (no keyboard or mouse responds), and I have to hit the reset button. This also happens if I do the following: sudo ifconfig rausb0 down sudo ifconfig rausb0 up Now, I've found that if I physically unplug and replug the device itself between stop/start or down/up, then you don't get a crash. This is how I avoid the problem at the moment, but it would be nice to be able to restart. This occurs on Dapper (using the built-in driver in Flight 5), and it also occurs on Breezy using the CVS driver for rt2570, which you can find here: http://rt2x00.serialmonkey.com/wiki/index.php/Downloads -- Crash/freeze when restarting networking, rt2570 wireless USB (DWL-G122, rev B1) https://launchpad.net/bugs/37370 From sitsofe at yahoo.com Sat Apr 22 14:15:13 2006 From: sitsofe at yahoo.com (Sitsofe Wheeler) Date: Sat, 22 Apr 2006 14:15:13 -0000 Subject: [Bug 40762] Re: zd1201 usb wireless stick driver firmware missing in dapper drake flight 5 References: <20060422133216.30501.64821.malonedeb@gangotri.ubuntu.com> Message-ID: <20060422141514.30538.71594.malone@gangotri.ubuntu.com> Punting to linux-source based on location of zd1211 firmware. Could well be wrong though... ** Changed in: Ubuntu Sourcepackagename: None => linux-source-2.6.15 -- zd1201 usb wireless stick driver firmware missing in dapper drake flight 5 https://launchpad.net/bugs/40762 From sitsofe at yahoo.com Sat Apr 22 14:19:30 2006 From: sitsofe at yahoo.com (Sitsofe Wheeler) Date: Sat, 22 Apr 2006 14:19:30 -0000 Subject: [Bug 37370] Re: Crash/freeze when restarting networking, rt2570 wireless USB (DWL-G122, rev B1) References: <20060330180253.23733.49082.malonedeb@gandwana.ubuntu.com> Message-ID: <20060422141930.17643.70040.malone@gandwana.ubuntu.com> Kernel lockups generally can't be caused by userspace tools. Punting to linux-source. htinn: Can you confirm that caps lock stops working? ** Changed in: net-tools (Ubuntu) Sourcepackagename: net-tools => linux-source-2.6.15 Binarypackagename: net-tools => None -- Crash/freeze when restarting networking, rt2570 wireless USB (DWL-G122, rev B1) https://launchpad.net/bugs/37370 From bart at samwel.tk Sat Apr 22 14:29:48 2006 From: bart at samwel.tk (Bart Samwel) Date: Sat, 22 Apr 2006 14:29:48 -0000 Subject: [Bug 12483] Re: laptop-mode/IDE-APM hang on various laptops References: <20060113132548.21012.74332.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060422142948.30501.23640.malone@gangotri.ubuntu.com> Hi guys, I went through the whole thing once more, and I tried to collect all of the information in one small overview, so we could see new patterns. For laptops that I didn't know, I've collected the wireless card info from the net, I've marked these entries with "###". There seem to have been measurement errors and other bugs interfering (such as the ATI XOrg driver issue and the ipw2200 1.0.8 bug), but the big picture is pretty clear: there is a good chance that there is ipw2100/2200 hardware in all of the affected boxes. I'm not entirely sure, but does IPW2100/2200 imply a Centrino(-like) laptop or can it exist without Centrino hardware? If it can only exist as part of a full centrino laptop then the problem may lie anywhere in the Centrino hardware. An Intel HD controller chipset issue perhaps? BASIC SYMPTOMS: - Crash after going into battery mode - HD light stays on HARDWARE OBSERVATIONS: *** Thinkpad R51 (bug #11168, #17911) - ### ipw2100 - ### mobility radeon 9000 *** Thinkpad R51 (Mark Kohler in bug #12483) - madwifi - Not solved by disabling "hdparm -B". (Or is it? see message 24-09-2005 06:56:02 UTC) - ### mobility radeon 9000 *** Thinkpad R51 (AlexHudson in bug #12483) - ipw2200 - ### mobility radeon 9000 *** Thinkpad T40 (model 2379, Justin Mason, bug #12483) - madwifi - Vanilla 2.6.6 kernel + madwifi May 28, 2004 - Vanilla 2.6.10 kernel + madwifi Jan 15, 2005 - ATI Technologies Inc Radeon R250 Lf [Radeon Mobility 9000 M9] (rev 02) (prog-if 00 [VGA]) - Disabling "hdparm -B" solves this for Justin. *** Thinkpad T40 (Manoj Naik in bug #12483) - Not solved by disabling "hdparm -B", apparently (see msg dated 12-03-2006) - ### T40 can be delivered with Atheros (madwifi or airo drivers) or ipw2100 *** Thinkpad R40 (model 2722 B3G with Atheros AR5212 802.11abg NIC, Reihard Tartler, in bug #12483) - ### ati mobility radeon 7500 - ### ipw2100 *** Thinkpad T41 (Christian Elkjaert in bug #12483) - ipw2100 - radeon mobility 7500 - Disabling "hdparm -B" does not resolve the crashes. - Disabling laptop mode does not _completely_ resolve the crashes (see msg in bug #12483 dated 25-12-2005), but makes them less frequent (see msg in bug #12483 dated 28-02-2006). *** Thinkpad R42 (Matt Zimmerman, bug #12483) - ipw2200 - Radeon Mobility 7500 - can reproduce without laptop mode, with only hdparm -B1 - can reproduce without hdparm -B, with only laptop mode *** Dell X300 (= Celeron + ipw2200, Jeff Waugh in bug #12483) - Intel i855 graphics - ### comes with ipw2200 *** Dell 600M (Ben Maurer in bug #12483) - Still crashes with "hdparm -B" disabled - radeon 7000: switching to binary ati driver (see bug #10579) made problems less, but not disappear. - Has crashes also on AC -- may not be this bug at all. - See bug #17128 (ipw2200 instability) - ipw2200 *** Dell 600M (Brandon Hale in bug #12483) - Crashes not reproducable with "hdparm -B" disabled. - ### ipw2200 hardware *** Dell Latitude D600 (bug #13957) - ### ipw2100 hardware *** Acer TravelMate 620 (bug #13957) - Not solved by disabling "hdparm -B" - ### only TM623LCi comes with wireless pre-installed, Acer InviLink (Broadcom-based???) but if not a TM623LCi then user may use a different piece of hardware. HAVE TO CHECK! *** Acer TravelMate 292lmi (Gabriel Wicke in bug #12483) - Not solved by disabling "hdparm -B" - ### ipw2200 hardware *** Not affected: Thinkpad ??? (AgenT in bug #12483) - AIRONET Wireless Communications Cisco Aironet Wireless 802.11b (using module airo, not madwifi) - Intel Corp. 82801 PCI Bridge (rev 81) - Intel Corp. 82801DBM (ICH4) - Ultra ATA Storage Controller (rev 01) - ATI Technologies Inc Radeon Mobility M6 LY SOFTWARE OBSERVATIONS: - Occurs in Debian as well - Does NOT occur in Mandriva Limited 2005 (see bug #21036) - The only reported vanilla kernels were WITH madwifi (Justin Mason's Thinkpad T40), but other kernels may have been vanilla but were not reported as being vanilla. - Reported on vanilla 2.6.15-rc5 by Alistair Phipps (bug # 12483), unknown if madwifi was involved there. -- laptop-mode/IDE-APM hang on various laptops https://launchpad.net/bugs/12483 From sitsofe at yahoo.com Sat Apr 22 14:42:00 2006 From: sitsofe at yahoo.com (Sitsofe Wheeler) Date: Sat, 22 Apr 2006 14:42:00 -0000 Subject: [Bug 40736] Re: kernel oops with dpkg References: <20060422112557.17670.63564.malonedeb@gandwana.ubuntu.com> Message-ID: <20060422144200.30538.39617.malone@gangotri.ubuntu.com> The oops is a bit hard to read because of launchpad's wrapping - if it it had been uploaded as a text attachment using the add attachment link at the left this would have been better. I could be wrong but it looks like the crash was while the kernel was syncing buffers to disk? -- kernel oops with dpkg https://launchpad.net/bugs/40736 From sitsofe at yahoo.com Sat Apr 22 15:01:14 2006 From: sitsofe at yahoo.com (Sitsofe Wheeler) Date: Sat, 22 Apr 2006 15:01:14 -0000 Subject: [Bug 38689] Re: sky2 network driver heavy usage leads to hang References: <20060408071427.32313.1607.malonedeb@gandwana.ubuntu.com> Message-ID: <20060422150114.17643.76660.launchpad@gandwana.ubuntu.com> ** Summary changed: - sky2 network driver issue + sky2 network driver heavy usage leads to hang -- sky2 network driver heavy usage leads to hang https://launchpad.net/bugs/38689 From thomas.klein at lanterne.org Sat Apr 22 15:13:29 2006 From: thomas.klein at lanterne.org (gourdin) Date: Sat, 22 Apr 2006 15:13:29 -0000 Subject: [Bug 40729] sky2 driver network "freeze" while transfering datas References: <20060422103435.17643.56902.malonedeb@gandwana.ubuntu.com> Message-ID: <20060422151329.30501.83734.launchpad@canonical@gangotri.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: 0000:07:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8036 Fast Ethernet Controller (rev 15) sky2 driver loaded I can browse the web, check emails etc... but, If I try some rsync from my old laptop (to backup my stuff) the network freeze after 1 or 2minutes. the bug is reproductible. I don't have logs each time, but, sometimes I got this Apr 15 11:35:42 archon kernel: [4297572.802000] NETDEV WATCHDOG: eth0: transmit timed out Apr 15 11:35:42 archon kernel: [4297572.802000] sky2 hardware hung? flushing I try to compile the latest kernel 2.6.16.9 with make_kpkg I tried it and the bug was still there... :( I'm runing dapper drake (up to date) on a vaio sz1 Linux archon 2.6.15-20-686 #1 SMP PREEMPT Tue Apr 4 18:37:00 UTC 2006 i686 GNU/Linux -- sky2 driver network "freeze" while transfering datas https://launchpad.net/bugs/40729 From josephlanders at gmail.com Sat Apr 22 15:10:17 2006 From: josephlanders at gmail.com (Z3r0) Date: Sat, 22 Apr 2006 15:10:17 -0000 Subject: [Bug 40771] D-Link DWL G630 Rev.D isn't detected References: <20060422151017.30538.95545.malonedeb@gangotri.ubuntu.com> Message-ID: <20060422151017.30538.95545.malonedeb@gangotri.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 kernel-image-2.6.15-20-386-di (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: I have a Compaq V2417AU, the CPU doesn't have access to the PCI bus of the PC Card, meaning that the madwifi driver don't get loaded as the device isn't detected. This is only resolved by issuing pci=assign-busses on the command line, something needs to be done about this. Either assigning busses automatically all the time or perhaps a kernel blacklist of systems that require this. -- D-Link DWL G630 Rev.D isn't detected https://launchpad.net/bugs/40771 From sitsofe at yahoo.com Sat Apr 22 15:12:42 2006 From: sitsofe at yahoo.com (Sitsofe Wheeler) Date: Sat, 22 Apr 2006 15:12:42 -0000 Subject: [Bug 40729] Re: sky2 driver network "freeze" while transfering datas References: <20060422103435.17643.56902.malonedeb@gandwana.ubuntu.com> Message-ID: <20060422151242.30538.80580.malone@gangotri.ubuntu.com> Possibly a dup of Bug #40304, bug #37784, Bug #38689, Bug #33230 -- sky2 driver network "freeze" while transfering datas https://launchpad.net/bugs/40729 From sitsofe at yahoo.com Sat Apr 22 15:13:29 2006 From: sitsofe at yahoo.com (Sitsofe Wheeler) Date: Sat, 22 Apr 2006 15:13:29 -0000 Subject: [Bug 40729] Re: sky2 driver network "freeze" while transfering datas References: <20060422103435.17643.56902.malonedeb@gandwana.ubuntu.com> Message-ID: <20060422151329.30501.93282.malone@gangotri.ubuntu.com> Punting to linux-source. ** Changed in: Ubuntu Sourcepackagename: None => linux-source-2.6.15 -- sky2 driver network "freeze" while transfering datas https://launchpad.net/bugs/40729 From sitsofe at yahoo.com Sat Apr 22 15:11:23 2006 From: sitsofe at yahoo.com (Sitsofe Wheeler) Date: Sat, 22 Apr 2006 15:11:23 -0000 Subject: [Bug 37784] Re: sky2 ethernet driver is freezing on big upload References: <20060402235408.5441.13560.malonedeb@gangotri.ubuntu.com> Message-ID: <20060422151123.30538.2771.launchpad@gangotri.ubuntu.com> ** Summary changed: - sky2 ethernet driver is freezing + sky2 ethernet driver is freezing on big upload -- sky2 ethernet driver is freezing on big upload https://launchpad.net/bugs/37784 From rkimber at ntlworld.com Sat Apr 22 15:48:02 2006 From: rkimber at ntlworld.com (Rkimber) Date: Sat, 22 Apr 2006 15:48:02 -0000 Subject: [Bug 40736] Re: kernel oops with dpkg References: <20060422112557.17670.63564.malonedeb@gandwana.ubuntu.com> Message-ID: <20060422154802.30538.34092.launchpad@gangotri.ubuntu.com> ** Attachment added: "further oopses" http://librarian.launchpad.net/2265902/1286 ** Attachment added: "Badness in unqueue_me" http://librarian.launchpad.net/2265903/1287 -- kernel oops with dpkg https://launchpad.net/bugs/40736 From hez at truegeek.net Sat Apr 22 16:02:00 2006 From: hez at truegeek.net (Hezekiah Carty) Date: Sat, 22 Apr 2006 16:02:00 -0000 Subject: [Bug 35213] Re: hibernate fails when not on AC power on HP Pavilion ZT3000 - regression from breezy References: <20060316170910.6510.54248.malonedeb@gangotri.ubuntu.com> Message-ID: <20060422160200.30538.38077.malone@gangotri.ubuntu.com> The most recent acpi-support updates seem to have fixed this, at least most of the way. Hibernation is now much quicker (happens in some number of seconds, rather than 10s of minutes) on my Sony laptop. -- hibernate fails when not on AC power on HP Pavilion ZT3000 - regression from breezy https://launchpad.net/bugs/35213 From teleyinex at confluencia.net Sat Apr 22 16:18:33 2006 From: teleyinex at confluencia.net (=?utf-8?q?Daniel_Lombra=C3=B1a?=) Date: Sat, 22 Apr 2006 16:18:33 -0000 Subject: [Bug 32689] Hibernate sometimes dont work References: <20060224083000.16638.47377.malonedeb@gandwana.ubuntu.com> Message-ID: <20060422161833.30538.62899.launchpad@canonical@gangotri.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: Well, I have 512 MB of RAM, and 530 MB of Swap. I have changed the swappiness to 10, so my swap when I hibernate the first time is clean, all free. When I resume from it, I get the swap partially occupied, and I dont understand why, if before I hibernate it, it was clean. Is this a bug? Im usign Breezy. Thanks in advance. -- Hibernate sometimes dont work https://launchpad.net/bugs/32689 From dennis at kaarsemaker.net Sat Apr 22 16:18:33 2006 From: dennis at kaarsemaker.net (Dennis Kaarsemaker) Date: Sat, 22 Apr 2006 16:18:33 -0000 Subject: [Bug 32689] Re: Hibernate sometimes dont work References: <20060224083000.16638.47377.malonedeb@gandwana.ubuntu.com> Message-ID: <20060422161833.30538.62550.malone@gangotri.ubuntu.com> Kernel team, do you consider this to be a feature or a bug? ** Changed in: hibernate (Ubuntu) Sourcepackagename: hibernate => linux-source-2.6.15 Binarypackagename: hibernate => None -- Hibernate sometimes dont work https://launchpad.net/bugs/32689 From me at davidandrewtaylor.co.uk Sat Apr 22 16:34:06 2006 From: me at davidandrewtaylor.co.uk (David Taylor) Date: Sat, 22 Apr 2006 16:34:06 -0000 Subject: [Bug 40319] Re: ndiswrapper no longer works with SafeCom SWLP-5408 in Dapper References: <20060420124050.21557.81411.malonedeb@gangotri.ubuntu.com> Message-ID: <20060422163406.30538.17365.malone@gangotri.ubuntu.com> Works again in the beta version - I would like to close this record but can't seem to see how. -- ndiswrapper no longer works with SafeCom SWLP-5408 in Dapper https://launchpad.net/bugs/40319 From burner at suppressingfire.org Sat Apr 22 17:48:52 2006 From: burner at suppressingfire.org (Michael R. Head) Date: Sat, 22 Apr 2006 17:48:52 -0000 Subject: [Bug 35213] Re: hibernate fails when not on AC power on HP Pavilion ZT3000 - regression from breezy References: <20060316170910.6510.54248.malonedeb@gangotri.ubuntu.com> Message-ID: <20060422174852.17643.10793.malone@gandwana.ubuntu.com> Yeah, here's the changelog snippet: acpi-support (0.72) dapper; urgency=low * Re-disable laptop-mode by default, to work around LP#12483 - Has the pleasant side effect of making the comment match the code -- Matt Zimmerman Sat, 22 Apr 2006 05:34:12 -0700 Which raises the question, is this bug a dupe of bug 12483? -- hibernate fails when not on AC power on HP Pavilion ZT3000 - regression from breezy https://launchpad.net/bugs/35213 From mjg59 at codon.org.uk Sat Apr 22 18:03:51 2006 From: mjg59 at codon.org.uk (Matthew Garrett) Date: Sat, 22 Apr 2006 18:03:51 -0000 Subject: [Bug 40336] Re: LCD Brightness resets to lowest on bootup with laptop ubuntu amd64 References: <20060420144458.21557.97648.malonedeb@gangotri.ubuntu.com> Message-ID: <20060422180351.30501.85367.launchpad@gangotri.ubuntu.com> *** This bug is a duplicate of bug 12637 *** ** This bug has been marked a duplicate of bug 12637 LCD Brightness on Laptop Always Set Very Low at Boot -- LCD Brightness resets to lowest on bootup with laptop ubuntu amd64 https://launchpad.net/bugs/40336 From mjg59 at codon.org.uk Sat Apr 22 18:03:51 2006 From: mjg59 at codon.org.uk (Matthew Garrett) Date: Sat, 22 Apr 2006 18:03:51 -0000 Subject: [Bug 12637] Re: LCD Brightness on Laptop Always Set Very Low at Boot References: <20060113132646.21012.81619.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060422180351.30501.53882.launchpad@gangotri.ubuntu.com> ** Bug 40336 has been marked a duplicate of this bug -- LCD Brightness on Laptop Always Set Very Low at Boot https://launchpad.net/bugs/12637 From sapienguard-ubuntu at yahoo.com Sat Apr 22 18:07:34 2006 From: sapienguard-ubuntu at yahoo.com (Manoj Naik) Date: Sat, 22 Apr 2006 18:07:34 -0000 Subject: [Bug 12483] Re: laptop-mode/IDE-APM hang on various laptops References: <20060113132548.21012.74332.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060422180734.30501.57984.malone@gangotri.ubuntu.com> > Posted by Bart Samwel at 2006-04-22 14:29:48 UTC > ... but the big picture is pretty clear: there is a good chance > that there is ipw2100/2200 hardware in all of the affected > boxes. I am seeing this problem with T40 and Atheros (madwifi). lspci reports: 0000:02:02.0 Ethernet controller: Atheros Communications, Inc. AR5212 802.11abg NIC (rev 01) -- laptop-mode/IDE-APM hang on various laptops https://launchpad.net/bugs/12483 From mark.baaijens at gmail.com Sat Apr 22 18:16:30 2006 From: mark.baaijens at gmail.com (markba) Date: Sat, 22 Apr 2006 18:16:30 -0000 Subject: [Bug 38702] Re: sound does not work References: <20060408091302.32233.60251.malonedeb@gandwana.ubuntu.com> Message-ID: <20060422181630.17643.20937.malone@gandwana.ubuntu.com> "Same problem for me, working on a Dell 3100" Problem seems, at least in my case, to be fixed in Dapper Beta 1.(Linux-kernel = 2.6.15-20) -- sound does not work https://launchpad.net/bugs/38702 From l.bigonville at edpnet.be Sat Apr 22 19:04:18 2006 From: l.bigonville at edpnet.be (Laurent Bigonville) Date: Sat, 22 Apr 2006 19:04:18 -0000 Subject: [Bug 40662] Re: pulling plug on laptop with battery connected causes laptop to suspend References: <20060421223636.17670.50725.malonedeb@gandwana.ubuntu.com> Message-ID: <20060422190418.17670.13507.launchpad@gandwana.ubuntu.com> *** This bug is a duplicate of bug 40730 *** ** This bug has been marked a duplicate of bug 40730 Dell M60 suspends when power unplugged -- pulling plug on laptop with battery connected causes laptop to suspend https://launchpad.net/bugs/40662 From filcab at gmail.com Sat Apr 22 19:05:16 2006 From: filcab at gmail.com (FilCab) Date: Sat, 22 Apr 2006 19:05:16 -0000 Subject: [Bug 37056] Re: [Bug 37056] Re: There should be several nVIDIA driver packages References: <20060328193442.6253.19683.malonedeb@gandwana.ubuntu.com> <20060422081629.30501.35317.malone@gangotri.ubuntu.com> Message-ID: Of course you will tell them so... But you want your graphics card working in the meanwhile. On 4/22/06, Sitsofe Wheeler wrote: > No one with a newer card should be using the legacy drivers. They exist solely for legacy cards (perhaps NVIDIA will remove the IDs of newer cards in the next release of the legacy drivers to dissuade people from doing so). > > If newer driver version Y breaks on your card whereas X works you _must_ get in contact with NVIDIA and tell them so. New kernel versions break older versions of the drivers anyway - if there's a problem with new drivers NVIDIA have to be informed so they can fix it. > > -- > There should be several nVIDIA driver packages > https://launchpad.net/bugs/37056 > -- There should be several nVIDIA driver packages https://launchpad.net/bugs/37056 From bart at samwel.tk Sat Apr 22 19:11:52 2006 From: bart at samwel.tk (Bart Samwel) Date: Sat, 22 Apr 2006 19:11:52 -0000 Subject: [Bug 12483] Re: [Bug 12483] Re: laptop-mode/IDE-APM hang on various laptops References: <20060113132548.21012.74332.launchpad@macquarie.warthogs.hbd.com> <20060422180734.30501.57984.malone@gangotri.ubuntu.com> Message-ID: <444A7FF8.4020204@samwel.tk> Manoj Naik wrote: >> Posted by Bart Samwel at 2006-04-22 14:29:48 UTC >> ... but the big picture is pretty clear: there is a good chance > that there is ipw2100/2200 hardware in all of the affected > boxes. > > I am seeing this problem with T40 and Atheros (madwifi). lspci reports: > 0000:02:02.0 Ethernet controller: Atheros Communications, Inc. AR5212 802.11abg NIC (rev 01) Damn. :-/ What's handling IDE on that machine BTW? Intel chipset? -- laptop-mode/IDE-APM hang on various laptops https://launchpad.net/bugs/12483 From lure.net at gmail.com Sat Apr 22 19:16:17 2006 From: lure.net at gmail.com (Luka Renko) Date: Sat, 22 Apr 2006 19:16:17 -0000 Subject: [Bug 34587] Re: Hibernating 1GB of RAM doesn't work anymore with 2.6.15-18 & -19 References: <20060312123742.17044.83867.malonedeb@gangotri.ubuntu.com> Message-ID: <20060422191617.30538.52587.malone@gangotri.ubuntu.com> Confirmed fixed with Ubuntu Beta. -- Hibernating 1GB of RAM doesn't work anymore with 2.6.15-18 & -19 https://launchpad.net/bugs/34587 From jeremy.vies at gmail.com Sat Apr 22 19:31:36 2006 From: jeremy.vies at gmail.com (Jeremy Vies) Date: Sat, 22 Apr 2006 19:31:36 -0000 Subject: [Bug 24361] Re: pcmcia Ralink RT2500 driver freezes laptop while working on batteries References: <20060113142841.21012.64686.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060422193136.30538.2056.malone@gangotri.ubuntu.com> it seems so... I wonder if we shound not try the rt2x00 driver instead ? -- pcmcia Ralink RT2500 driver freezes laptop while working on batteries https://launchpad.net/bugs/24361 From unrandomsam at gmail.com Sat Apr 22 19:48:27 2006 From: unrandomsam at gmail.com (h3sp4wn) Date: Sat, 22 Apr 2006 19:48:27 -0000 Subject: [Bug 39771] Re: PL2303 compatible usb device driver device id's References: <20060416141843.1627.25330.malonedeb@gangotri.ubuntu.com> Message-ID: <20060422194827.30501.33733.malone@gangotri.ubuntu.com> The patch is not in linux-source-2.6.15 so how is the fix commited ? -- PL2303 compatible usb device driver device id's https://launchpad.net/bugs/39771 From sitsofe at yahoo.com Sat Apr 22 19:48:47 2006 From: sitsofe at yahoo.com (Sitsofe Wheeler) Date: Sat, 22 Apr 2006 19:48:47 -0000 Subject: [Bug 38880] Re: Boot Hangs at "BIOS data check successful" References: <20060409142904.32313.92361.malonedeb@gandwana.ubuntu.com> Message-ID: <20060422194847.17643.80040.malone@gandwana.ubuntu.com> Can you check whether there is a newer BIOS for your machine? (Watch out - you flash your BIOS at your OWN RISK. If you turn your machine into a paperweight don't blame me etc.) -- Boot Hangs at "BIOS data check successful" https://launchpad.net/bugs/38880 From sapienguard-ubuntu at yahoo.com Sat Apr 22 19:48:36 2006 From: sapienguard-ubuntu at yahoo.com (Manoj Naik) Date: Sat, 22 Apr 2006 19:48:36 -0000 Subject: [Bug 12483] Re: laptop-mode/IDE-APM hang on various laptops References: <20060113132548.21012.74332.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060422194836.17670.25246.malone@gandwana.ubuntu.com> Bart Samwel wrote: >> I am seeing this problem with T40 and Atheros (madwifi). lspci reports: >> 0000:02:02.0 Ethernet controller: Atheros Communications, Inc. AR5212 802.11abg NIC (rev 01) > > Damn. :-/ > > What's handling IDE on that machine BTW? Intel chipset? 0000:00:1f.1 IDE interface: Intel Corporation 82801DBM (ICH4-M) IDE Controller (rev 01) If I switch to console quickly enough (Ctrl-Alt-f1) and use one of the sysrq keys ('t' I think) before the freeze, I get a bunch of errors as follows: ide: failed opcode was: unknown hda: task_in_intr: status=?? hda: task_in_intr: error=?? I don't know if it's important but I'll try to note the status/error codes next time this happens. -- laptop-mode/IDE-APM hang on various laptops https://launchpad.net/bugs/12483 From sitsofe at yahoo.com Sat Apr 22 19:54:42 2006 From: sitsofe at yahoo.com (Sitsofe Wheeler) Date: Sat, 22 Apr 2006 19:54:42 -0000 Subject: [Bug 38880] Re: Boot Hangs at "BIOS data check successful" References: <20060409142904.32313.92361.malonedeb@gandwana.ubuntu.com> Message-ID: <20060422195442.17670.42901.malone@gandwana.ubuntu.com> Sounds a bit like this: http://bugme.osdl.org/show_bug.cgi?id=1458 -- Boot Hangs at "BIOS data check successful" https://launchpad.net/bugs/38880 From sitsofe at yahoo.com Sat Apr 22 19:57:03 2006 From: sitsofe at yahoo.com (Sitsofe Wheeler) Date: Sat, 22 Apr 2006 19:57:03 -0000 Subject: [Bug 38327] Re: nvidia-gx driver seems not to work since 2.6.15-19 References: <20060406061555.24516.98284.malonedeb@gangotri.ubuntu.com> Message-ID: <20060422195703.17643.45492.malone@gandwana.ubuntu.com> Marking as rejected based on previous comment talking about uninstalled packages. ** Changed in: linux-meta linux-image-k7 (Ubuntu) Status: Unconfirmed => Rejected -- nvidia-gx driver seems not to work since 2.6.15-19 https://launchpad.net/bugs/38327 From sitsofe at yahoo.com Sat Apr 22 21:38:42 2006 From: sitsofe at yahoo.com (Sitsofe Wheeler) Date: Sat, 22 Apr 2006 21:38:42 -0000 Subject: [Bug 38863] Re: sky2 driver bugy(producing lots of message) but working References: <20060409124750.24516.7194.malonedeb@gangotri.ubuntu.com> Message-ID: <20060422213842.30538.74815.malone@gangotri.ubuntu.com> This looks a lot like you have turned some sort of firewall logging on... -- sky2 driver bugy(producing lots of message) but working https://launchpad.net/bugs/38863 From surak at surak.eti.br Sat Apr 22 21:43:11 2006 From: surak at surak.eti.br (Alexandre Otto Strube) Date: Sat, 22 Apr 2006 21:43:11 -0000 Subject: [Bug 37430] Re: Crash during breezy->dapper upgrade References: <20060331041215.23707.99296.malonedeb@gandwana.ubuntu.com> Message-ID: <20060422214311.30501.32728.malone@gangotri.ubuntu.com> Mike, Stewart, any news on it? Thanks a lot! -- Crash during breezy->dapper upgrade https://launchpad.net/bugs/37430 From bart at samwel.tk Sat Apr 22 21:44:44 2006 From: bart at samwel.tk (Bart Samwel) Date: Sat, 22 Apr 2006 21:44:44 -0000 Subject: [Bug 12483] Re: [Bug 12483] Re: laptop-mode/IDE-APM hang on various laptops References: <20060113132548.21012.74332.launchpad@macquarie.warthogs.hbd.com> <20060422194836.17670.25246.malone@gandwana.ubuntu.com> Message-ID: <444AA3CC.6050703@samwel.tk> Manoj Naik wrote: > Bart Samwel wrote: >>> I am seeing this problem with T40 and Atheros (madwifi). lspci reports: >>> 0000:02:02.0 Ethernet controller: Atheros Communications, Inc. AR5212 802.11abg NIC (rev 01) >> Damn. :-/ >> >> What's handling IDE on that machine BTW? Intel chipset? > > 0000:00:1f.1 IDE interface: Intel Corporation 82801DBM (ICH4-M) IDE Controller (rev 01) > > If I switch to console quickly enough (Ctrl-Alt-f1) and use one of the sysrq keys ('t' I think) before the freeze, I get a bunch of errors as follows: > > ide: failed opcode was: unknown > hda: task_in_intr: status=?? > hda: task_in_intr: error=?? > > I don't know if it's important but I'll try to note the status/error codes next time this happens. That would be very interesting indeed. BTW, AgenT reported earlier in this thread that this worked for him on a Thinkpad with exactly that IDE controller. His lspci output was "Intel Corp. 82801DBM (ICH4) Ultra ATA Storage Controller (rev 01)", yours said "IDE Controller". I don't know if this could make a difference between crashing and not crashing... I think it would be interesting to find out what kind of IDE controllers the other people are using. It does seem to be a HD problem, after all. As IPW2[12]00 is Intel, it's possible that the laptops all use the same Intel IDE controller. So, could anybody else who can reproduce this problem please report their exact IDE controller lines/descriptions as reported by lspci? (In fact, full lspci output might be preferable, so that we can check out other common factors!) -- laptop-mode/IDE-APM hang on various laptops https://launchpad.net/bugs/12483 From djtansey at gmail.com Sat Apr 22 21:47:31 2006 From: djtansey at gmail.com (David Tansey) Date: Sat, 22 Apr 2006 21:47:31 -0000 Subject: [Bug 40841] ath_hal/ath_pci not loadable References: <20060422214731.17643.1769.malonedeb@gandwana.ubuntu.com> Message-ID: <20060422214731.17643.1769.malonedeb@gandwana.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 linux-image-2.6.15-20-386 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: When I started the dapper beta liveCD I didn't have my wireless network setup automatically, but it was available in the System->Admin->Networking tool. When I rebooted into my installed system it was no longer there. modprobe ath_pci gave an error. modprobe ath_hal said that ath_hal wasn't found, even though it was in /lib/linux- restricted-modules/2.6.15-20-386/ath_hal/ath_hal.mod.o I had to reboot into the liveCD and apt-get install -d the 686 version and copy it to my local drive so I could have wireless internet. -- ath_hal/ath_pci not loadable https://launchpad.net/bugs/40841 From gtaylor at clemson.edu Sat Apr 22 22:02:38 2006 From: gtaylor at clemson.edu (Greg Taylor) Date: Sat, 22 Apr 2006 22:02:38 -0000 Subject: [Bug 37291] Re: NETDEV_TX_BUSY returned when (re)loading driver References: <20060330075920.6253.48234.malonedeb@gandwana.ubuntu.com> Message-ID: <20060422220238.17670.53710.malone@gandwana.ubuntu.com> Have the same issue on my Canonical-Issued Toshiba Tecra A4 with ipw2200 card. I am able to maintain a connection, though as mentioned, it is very sluggish. -- NETDEV_TX_BUSY returned when (re)loading driver https://launchpad.net/bugs/37291 From gtaylor at clemson.edu Sat Apr 22 22:05:01 2006 From: gtaylor at clemson.edu (Greg Taylor) Date: Sat, 22 Apr 2006 22:05:01 -0000 Subject: [Bug 37291] Re: NETDEV_TX_BUSY returned when (re)loading driver References: <20060330075920.6253.48234.malonedeb@gandwana.ubuntu.com> Message-ID: <20060422220501.30501.61692.malone@gangotri.ubuntu.com> Ok, I take that back. Here's what I get a few minutes later: eth1: no IPv6 routers present eth1: no IPv6 routers present ipw2200: Failed to send SCAN_ABORT: Command timed out. ipw2200: Failed to send CARD_DISASBLE: Command timed out. ipw2200: Failed to send TX_POWER: Command timed out. ipw2200: Failed to send TX_POWER: Command timed out. ipw2200: Failed to send TX_POWER: Command timed out. ipw2200: Failed to send TX_POWER: Command timed out. ipw2200: Failed to send TX_POWER: Command timed out. ipw2200: Unabl to initialize device after 5 attempts. ipw2200: Failed to up device My connection is then broken. -- NETDEV_TX_BUSY returned when (re)loading driver https://launchpad.net/bugs/37291 From gtaylor at clemson.edu Sat Apr 22 22:07:33 2006 From: gtaylor at clemson.edu (Greg Taylor) Date: Sat, 22 Apr 2006 22:07:33 -0000 Subject: [Bug 40844] Wireless killswitch Error References: <20060422220733.17670.41147.malonedeb@gandwana.ubuntu.com> Message-ID: <20060422220733.17670.41147.malonedeb@gandwana.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: This just looks to be a simple reversal of logic, but maybe it's more complex. On my Canonical-Issued Toshiba Tecra A4, there is a wireless killswitch on the front. I tried to pull an IP with this off and this is what dmesg says: Kill switch must be turned off for wireless networking to work. Note that the killswitch is already off. I turn it on and try to pull an IP again and it works with no error message. -- Wireless killswitch Error https://launchpad.net/bugs/40844 From spam.to.f at lkenhagen.de Sat Apr 22 22:39:54 2006 From: spam.to.f at lkenhagen.de (Jan Falkenhagen) Date: Sat, 22 Apr 2006 22:39:54 -0000 Subject: [Bug 40371] Re: cambridge silicon radio bluetooth dongle prevents from successfull suspend References: <20060420174745.8495.22217.malonedeb@gandwana.ubuntu.com> Message-ID: <20060422223954.30538.74047.malone@gangotri.ubuntu.com> behaviour seems to be fixed with the updates of today ** Changed in: linux-source-2.6.15 linux-image-2.6.15-20-686 (Ubuntu) Status: Unconfirmed => Fix Released -- cambridge silicon radio bluetooth dongle prevents from successfull suspend https://launchpad.net/bugs/40371 From htinnocent at gmail.com Sat Apr 22 22:42:37 2006 From: htinnocent at gmail.com (htinn) Date: Sat, 22 Apr 2006 22:42:37 -0000 Subject: [Bug 37370] Re: Crash/freeze when restarting networking, rt2570 wireless USB (DWL-G122, rev B1) References: <20060330180253.23733.49082.malonedeb@gandwana.ubuntu.com> Message-ID: <20060422224237.17670.18364.malone@gandwana.ubuntu.com> The caps lock does indeed stop working, along with everything else keyboard-related. The only remedy is to press the reset button when it occurs. I can't promise you that it will occur 100% of the time, though. I just tried it now, and the stop/start worked fine the first time. The second time, however, made it freeze. -- Crash/freeze when restarting networking, rt2570 wireless USB (DWL-G122, rev B1) https://launchpad.net/bugs/37370 From c.elkjaer at gmail.com Sat Apr 22 22:47:55 2006 From: c.elkjaer at gmail.com (Christian Elkjaer) Date: Sat, 22 Apr 2006 22:47:55 -0000 Subject: [Bug 12483] Re: laptop-mode/IDE-APM hang on various laptops References: <20060113132548.21012.74332.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060422224755.30538.71734.launchpad@gangotri.ubuntu.com> ** Attachment added: "lspci output for Thinkpad T41" http://librarian.launchpad.net/2266180/thinkpad_t41_lspci_output -- laptop-mode/IDE-APM hang on various laptops https://launchpad.net/bugs/12483 From tommy at home.tig-grr.com Sat Apr 22 23:04:32 2006 From: tommy at home.tig-grr.com (Tom Marshall) Date: Sat, 22 Apr 2006 23:04:32 -0000 Subject: [Bug 40849] ipw2200 frequently fails to resume from S3 References: <20060422230432.17670.12158.malonedeb@gandwana.ubuntu.com> Message-ID: <20060422230432.17670.12158.malonedeb@gandwana.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 linux-image-2.6.15-20-686 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: Frequently (between 10% and 50% of the time) ipw2200 will fail to operate after resume from ACPI S3 state. Laptop is a Thinkpad T42 2378-XXE. I found errors regarding TX_POWER in /var/log/syslog followed by a failed module load. After machine is awake, retrying "modprobe ipw2200" works fine. Apr 22 10:41:09 genesis kernel: [4337330.721000] Thawing cpus ... Apr 22 10:41:09 genesis kernel: [4337330.799000] hub 1-0:1.0: over-current change on port 4 Apr 22 10:41:11 genesis brltty[3304]: Not a serial device: /dev/ttyS0 Apr 22 10:41:11 genesis kernel: [4337333.278000] ttyS0: LSR safety check engaged! Apr 22 10:41:11 genesis kernel: [4337333.359000] Intel(R) PRO/1000 Network Driver - version 7.0.33-k2 Apr 22 10:41:11 genesis kernel: [4337333.359000] Copyright (c) 1999-2005 Intel Corporation. Apr 22 10:41:11 genesis kernel: [4337333.359000] ACPI: PCI Interrupt 0000:02:01.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11Apr 22 10:41:12 genesis kernel: [4337334.040000] e1000: 0000:02:01.0: e1000_probe: (PCI:33MHz:32-bit) 00:11:25:82:81:fe Apr 22 10:41:12 genesis kernel: [4337334.068000] e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection Apr 22 10:41:12 genesis kernel: [4337334.075000] ieee80211_crypt: registered algorithm 'NULL' Apr 22 10:41:12 genesis kernel: [4337334.078000] ieee80211: 802.11 data/management/control stack, git-1.1.7 Apr 22 10:41:12 genesis kernel: [4337334.078000] ieee80211: Copyright (C) 2004-2005 Intel Corporation Apr 22 10:41:12 genesis kernel: [4337334.081000] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.1.1 Apr 22 10:41:12 genesis kernel: [4337334.081000] ipw2200: Copyright(c) 2003-2006 Intel Corporation Apr 22 10:41:12 genesis kernel: [4337334.081000] ACPI: PCI Interrupt 0000:02:02.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11Apr 22 10:41:12 genesis kernel: [4337334.082000] ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection Apr 22 10:41:40 genesis kernel: [4337334.257000] Freezing cpus ... Apr 22 10:41:40 genesis kernel: [4337334.257000] Stopping tasks: =============================================================================================================<3>ipw2200: Failed to send TX_POWER: Already sending a command. Apr 22 10:41:40 genesis kernel: [4337334.359000] =<3>ipw2200: Failed to send TX_POWER: Already sending a command. Apr 22 10:41:40 genesis kernel: [4337334.489000] ipw2200: Failed to send TX_POWER: Already sending a command. Apr 22 10:41:40 genesis kernel: [4337334.598000] ipw2200: Failed to send TX_POWER: Already sending a command. Apr 22 10:41:40 genesis kernel: [4337334.707000] ipw2200: Failed to send TX_POWER: Already sending a command. Apr 22 10:41:40 genesis kernel: [4337334.707000] ipw2200: Unable to initialize device after 5 attempts. Apr 22 10:41:40 genesis kernel: [4337334.707000] ipw2200: failed to register network device Apr 22 10:41:40 genesis kernel: [4337334.707000] ACPI: PCI interrupt for device 0000:02:02.0 disabled Apr 22 10:41:40 genesis kernel: [4337334.707000] ipw2200: probe of 0000:02:02.0 failed with error -5 Apr 22 10:41:40 genesis kernel: [4337334.707000] ==| -- ipw2200 frequently fails to resume from S3 https://launchpad.net/bugs/40849 From lakin.wecker at gmail.com Sat Apr 22 23:46:04 2006 From: lakin.wecker at gmail.com (Lakin Wecker) Date: Sat, 22 Apr 2006 23:46:04 -0000 Subject: [Bug 29499] Re: Acer Ferrari 4005 Fails to resume from Hibernate References: <20060123232532.28441.7930.malonedeb@gangotri.ubuntu.com> Message-ID: <20060422234604.30538.8808.malone@gangotri.ubuntu.com> Well, I spoke too soon. It works about 1 in 4 times right now. (Up to date dapper). It fails during hibernation. The screen is black, and the harddriver light stays on. I've left it for at least 5 minutes, and no change. When it succeeds, it succeeds in under 2 minutes. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Fix Released => Confirmed -- Acer Ferrari 4005 Fails to resume from Hibernate https://launchpad.net/bugs/29499 From mk at netrino.com Sat Apr 22 23:54:33 2006 From: mk at netrino.com (Mark Kohler) Date: Sat, 22 Apr 2006 23:54:33 -0000 Subject: [Bug 12483] Re: laptop-mode/IDE-APM hang on various laptops References: <20060113132548.21012.74332.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060422235433.30538.18617.launchpad@gangotri.ubuntu.com> ** Attachment added: "lspci output for Thinkpad R51" http://librarian.launchpad.net/2266206/lspci.txt -- laptop-mode/IDE-APM hang on various laptops https://launchpad.net/bugs/12483 From michael.chesterton at gmail.com Sun Apr 23 06:42:10 2006 From: michael.chesterton at gmail.com (chesty) Date: Sun, 23 Apr 2006 06:42:10 -0000 Subject: [Bug 40880] ev0 n620c serial port doesn't work after suspending and resume. References: <20060423064210.17643.62899.malonedeb@gandwana.ubuntu.com> Message-ID: <20060423064210.17643.62899.malonedeb@gandwana.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: this is a recent dapper, not sure what other info to provide. -- ev0 n620c serial port doesn't work after suspending and resume. https://launchpad.net/bugs/40880 From julian_yap at yahoo.com Sun Apr 23 07:28:31 2006 From: julian_yap at yahoo.com (Julian Yap) Date: Sun, 23 Apr 2006 07:28:31 -0000 Subject: [Bug 30557] Re: cpu idle time in /proc/stat wrong References: <20060205141542.11709.55517.malonedeb@gandwana.ubuntu.com> Message-ID: <20060423072831.17670.54548.launchpad@gandwana.ubuntu.com> ** Attachment added: "dmesg output - Dell Inspiron 6000" http://librarian.launchpad.net/2277309/dell_inspiron_6000_dmesg -- cpu idle time in /proc/stat wrong https://launchpad.net/bugs/30557 From vincent at vuntz.net Sun Apr 23 07:58:14 2006 From: vincent at vuntz.net (Vincent Untz) Date: Sun, 23 Apr 2006 07:58:14 -0000 Subject: [Bug 12483] Re: laptop-mode/IDE-APM hang on various laptops References: <20060113132548.21012.74332.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060423075814.30501.20672.launchpad@gangotri.ubuntu.com> ** Attachment added: "lspci output for Asus M6Ne" http://librarian.launchpad.net/2277320/lspci.txt -- laptop-mode/IDE-APM hang on various laptops https://launchpad.net/bugs/12483 From mdz at ubuntu.com Sun Apr 23 07:58:19 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Sun, 23 Apr 2006 07:58:19 -0000 Subject: [Bug 12483] Re: [Bug 12483] Re: [Bug 12483] Re: laptop-mode/IDE-APM hang on various laptops References: <20060113132548.21012.74332.launchpad@macquarie.warthogs.hbd.com> <20060422194836.17670.25246.malone@gandwana.ubuntu.com> <444AA3CC.6050703@samwel.tk> Message-ID: <20060423075818.GA7344@alcor.net> On Sat, Apr 22, 2006 at 09:44:44PM -0000, Bart Samwel wrote: > I think it would be interesting to find out what kind of IDE controllers > the other people are using. It does seem to be a HD problem, after all. > As IPW2[12]00 is Intel, it's possible that the laptops all use the same > Intel IDE controller. So, could anybody else who can reproduce this > problem please report their exact IDE controller lines/descriptions as > reported by lspci? (In fact, full lspci output might be preferable, so > that we can check out other common factors!) I see it here on a T42 with ipw2200 and: 0000:00:1f.1 IDE interface: Intel Corporation 82801DBM (ICH4-M) IDE Controller (rev 01) -- - mdz -- laptop-mode/IDE-APM hang on various laptops https://launchpad.net/bugs/12483 From rob.markovic at gmail.com Sun Apr 23 08:03:20 2006 From: rob.markovic at gmail.com (Robi) Date: Sun, 23 Apr 2006 08:03:20 -0000 Subject: [Bug 27422] Re: [Bug 27422] Re: [Bug 27422] Re: [Bug 27422] Re: USB Wi-Fi AirVast not detected References: <20060113145426.21012.92636.launchpad@macquarie.warthogs.hbd.com> <20060401002645.5415.51405.malone@gangotri.ubuntu.com> <97a9d8c80603311751h74510e41oc469c03ebeef3237@mail.gmail.com> <20060421134144.GK7344@alcor.net> Message-ID: <97a9d8c80604230103g62966e29k1652044507615bf9@mail.gmail.com> AirVast wi-fi is still broken in dapper live beta. It does get detected and modules get loaded, but I couldn't get it to associate to an open network or a wep64 with a known key. The failures are also not handled very informatively in the gnome network connection interface. There was no way to see a list of networks either. I'm attaching my notes, which includes output from lsusb, lsmod, and dmesg. Note that the errors at the end of dmesg are from trying to work with the wireless. Let me know if I can further provide testing.. finally vmware player allowed the usb device through. -- Robi -- USB Wi-Fi AirVast not detected https://launchpad.net/bugs/27422 From vijaymateti at gmail.com Sun Apr 23 08:26:53 2006 From: vijaymateti at gmail.com (Vijay Kumar Mateti) Date: Sun, 23 Apr 2006 08:26:53 -0000 Subject: [Bug 38068] couldn't uncompress the kernel References: <20060404185315.14649.8244.malonedeb@gandwana.ubuntu.com> Message-ID: <20060423082653.17670.25888.launchpad@canonical@gandwana.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: This is not the first time im installed dapper. I've treid almost 20 times installing various versions, various builds of dapper drake. but none was able to boot on my pc. When ever we enter into dapper drake from grub the message freezes at "boot" thats it. It wont go ahead of that. The kernel decompressing wont take place. I generally dual boot with windows. And this kind of problem is only with dapper. I could sucessfully run breezy, fedora and every other operationg system on the same partition. please help me out. I couldn't resist to try dapper. Hope you ppl find the solution for the bug. -- couldn't uncompress the kernel https://launchpad.net/bugs/38068 From dennis at kaarsemaker.net Sun Apr 23 08:26:53 2006 From: dennis at kaarsemaker.net (Dennis Kaarsemaker) Date: Sun, 23 Apr 2006 08:26:53 -0000 Subject: [Bug 38068] Re: couldn't uncompress the kernel References: <20060404185315.14649.8244.malonedeb@gandwana.ubuntu.com> Message-ID: <20060423082653.17670.53262.launchpad@gandwana.ubuntu.com> ** Changed in: linux-image-386 (Ubuntu) Sourcepackagename: linux-image-386 => linux-source-2.6.15 -- couldn't uncompress the kernel https://launchpad.net/bugs/38068 From sitsofe at yahoo.com Sun Apr 23 09:06:33 2006 From: sitsofe at yahoo.com (Sitsofe Wheeler) Date: Sun, 23 Apr 2006 09:06:33 -0000 Subject: [Bug 40841] Re: ath_hal/ath_pci not loadable References: <20060422214731.17643.1769.malonedeb@gandwana.ubuntu.com> Message-ID: <20060423090633.17643.61871.malone@gandwana.ubuntu.com> i386 kernel modules are of no use when you are running a 686 kernel. This sounds like a bug in whatever chose the packages to go on to your system. What did you use to do the hard disk install and did you manually switch to an i686 kernel? -- ath_hal/ath_pci not loadable https://launchpad.net/bugs/40841 From bart at samwel.tk Sun Apr 23 09:17:22 2006 From: bart at samwel.tk (Bart Samwel) Date: Sun, 23 Apr 2006 09:17:22 -0000 Subject: [Bug 12483] Re: laptop-mode/IDE-APM hang on various laptops References: <20060113132548.21012.74332.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060423091722.30538.18536.malone@gangotri.ubuntu.com> OK, the IDE controllers are virtually the same: T41 and T42: 82801DBM (ICH4-M) IDE Controller (Rev 01) 82801DBM (ICH4-M) IDE Controller (rev 01) Asus M6Ne: 82801DBM (ICH4-M) IDE Controller (rev 03) R51: 82801DBM (ICH4) Ultra ATA Storage Controller (rev 01) According to ThinkWiki this chip may be found in Thinkpads G40, G41, R40, R50, R50e, R50p, R51, T40, T40p, T41, T41p, T42, T42p, X31, X32, X40. Reference: http://www.thinkwiki.org/wiki/Intel_82801DBM The thing is, AgenT reported that the problem did _not_ occur on his Thinkpad, which contains the exact same chip. And I know a lot more laptops containing this chip that _don't_ have the problem. Combo with some other chip? Or with a specific HD series? Anyway, I googled "system hang 82801DBM" and found the 82801DBM specs, which contained on erratum that may or may not be our problem, I'm not very well-versed in PCI protocol speak. If anybody else cares to interpret this and see if it may be the problem, please be my guest. :-) The doc is here: http://download.intel.com/design/chipsets/specupdt/25266307.pdf Quote: "5. PCI Non-Linear Addressing Problem: If a PCI Memory Read Multiple or Memory Read Line transaction falls on the last DWORD of a 32 byte cache line boundary and non-linear addressing (cache-line wrap mode) is used, the ICH4-M will pre-fetch data past the cache line boundary. All subsequent PCI bus master reads will get incorrect data. Subsequent processor cycles to PCI/LPC will get blocked behind the surplus data resulting in a system hang. Implication: System hang only seen in synthetic test environment. No known commercial PCI devices support cache-line wrap mode using Memory Read Multiple or Memory Read Line. Workaround: None Status: There are no plans to fix this erratum." -- laptop-mode/IDE-APM hang on various laptops https://launchpad.net/bugs/12483 From malcomm77 at yahoo.com Sun Apr 23 09:54:57 2006 From: malcomm77 at yahoo.com (Marcus Malcom) Date: Sun, 23 Apr 2006 09:54:57 -0000 Subject: [Bug 40854] Intermittent Network Problem on Upgrade from Breezy to Dapper References: <20060422231604.30501.15730.malonedeb@gangotri.ubuntu.com> Message-ID: <20060423095457.17670.60849.launchpad@canonical@gandwana.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 ifupdown (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: Recently upgraded to Dapper and I seem to be having some network issues. Connectivity was working solidly under Breezy for over a year. On bootup there's no connectivity. Ping results in 100% packet loss to my router (192.168.0.1): "Destination Host Unreachable". If I unplug and re-plugin the network cable connectivity is restored for about a minute or so and then it fails. I've tried this using two separate sets of cables - both of which are known good - and the results are the same (problems). uname -a: Linux malcom 2.6.15-20-386 #1 PREEMPT Tue Apr 4 17:48:51 UTC 2006 i686 GNU/Linux NIC is coming up as: 21x4x DEC-Tulip compatible 10/100 Ethernet (Davicom Semiconductor, Inc.) -- Intermittent Network Problem on Upgrade from Breezy to Dapper https://launchpad.net/bugs/40854 From scott at ubuntu.com Sun Apr 23 09:54:56 2006 From: scott at ubuntu.com (Scott James Remnant) Date: Sun, 23 Apr 2006 09:54:56 -0000 Subject: [Bug 40854] Re: Intermittent Network Problem on Upgrade from Breezy to Dapper References: <20060422231604.30501.15730.malonedeb@gangotri.ubuntu.com> Message-ID: <20060423095457.17670.55956.malone@gandwana.ubuntu.com> This will be a kernel problem -- provided the network is UP with an IP address, it isn't an ifupdown or dhclient bug. ** Changed in: ifupdown (Ubuntu) Sourcepackagename: ifupdown => linux-source-2.6.15 ** Changed in: linux-source-2.6.15 ifupdown (Ubuntu) Binarypackagename: ifupdown => None -- Intermittent Network Problem on Upgrade from Breezy to Dapper https://launchpad.net/bugs/40854 From launchpad at alexhudson.com Sun Apr 23 10:00:33 2006 From: launchpad at alexhudson.com (AlexHudson) Date: Sun, 23 Apr 2006 10:00:33 -0000 Subject: [Bug 12483] Re: laptop-mode/IDE-APM hang on various laptops References: <20060113132548.21012.74332.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060423100033.30501.35836.malone@gangotri.ubuntu.com> My R51 Thinkpad also has the 82801DBM (ICH4-M) IDE Controller (rev 01) chip. According to lspci, it's used for a load of stuff, the only other significant chip really being the PCI bridge (82855PM rev 03). I had a Hitachi hard drive model IC25N060ATMR04-0, and a DVD RAM drive MATSHITADVD-RAM UJ-811. -- laptop-mode/IDE-APM hang on various laptops https://launchpad.net/bugs/12483 From igor4u at gmail.com Sun Apr 23 10:33:23 2006 From: igor4u at gmail.com (Igor Zubarev) Date: Sun, 23 Apr 2006 10:33:23 -0000 Subject: [Bug 38130] Re: Notebook (Sony Vaio PCG-SRX51P)does not recover from sleep mode References: <20060405055506.25515.44310.malonedeb@gangotri.ubuntu.com> Message-ID: <20060423103323.17670.90609.malone@gandwana.ubuntu.com> Dapper Flight 6, kernel 2.6-20-386, NV driver. For SONY VAIO VGN-FS115MR sleep does not work. Hibernation works, but with cracking sound from headphone. Also FN keys combinations doesn't work at all. -- Notebook (Sony Vaio PCG-SRX51P)does not recover from sleep mode https://launchpad.net/bugs/38130 From tim at sedlmeyer.us Sun Apr 23 10:58:28 2006 From: tim at sedlmeyer.us (Tim Sedlmeyer) Date: Sun, 23 Apr 2006 10:58:28 -0000 Subject: [Bug 40763] CCMP decrypt failed errors with ipw2200 References: <20060422134633.30538.35482.malonedeb@gangotri.ubuntu.com> Message-ID: <20060423105828.17670.7812.launchpad@canonical@gandwana.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: I am using an ipw2200 wireless card in conjunction with Network Manager and wpasupplicant. My wireless network uses WPA-PSK with AES. This combination worked great using Flight 5 and the unofficial Network Manger packages. Since upgrading to flight 6 and now with the beta release the network is unuseable. I can establish connectivity to the AP and get an IP address via DHCP. After a few minutes the network becomes slower and slower until it is useless. Occasionally it will then start to work ok for a few minutes and then slow down again. When it is slow the syslog file fills up with "CCMP decrypt failed" errors. -- CCMP decrypt failed errors with ipw2200 https://launchpad.net/bugs/40763 From djtansey at gmail.com Sun Apr 23 10:54:03 2006 From: djtansey at gmail.com (David Tansey) Date: Sun, 23 Apr 2006 10:54:03 -0000 Subject: [Bug 40841] Re: [Bug 40841] Re: ath_hal/ath_pci not loadable References: <20060422214731.17643.1769.malonedeb@gandwana.ubuntu.com> <20060423090633.17643.61871.malone@gandwana.ubuntu.com> Message-ID: I must not have been clear. When I loaded up the liveCD I was able to use my ath wireless card. When I bootted into my HD installation (which used the 386 kernel) I couldn't load ath_hal from a terminal -- though it was in the directory loaded. I used the liveCD to get the 686 kernel and restricted modules debs so I could install them. I wasn't trying to use mismatched modules/kernels. I used the espresso installer. And I had to manually switch to the 686 kernel. On 4/23/06, Sitsofe Wheeler wrote: > > i386 kernel modules are of no use when you are running a 686 kernel. > This sounds like a bug in whatever chose the packages to go on to your > system. What did you use to do the hard disk install and did you > manually switch to an i686 kernel? > > -- > ath_hal/ath_pci not loadable > https://launchpad.net/bugs/40841 > -- ath_hal/ath_pci not loadable https://launchpad.net/bugs/40841 From siretart at tauware.de Sun Apr 23 10:58:28 2006 From: siretart at tauware.de (Reinhard Tartler) Date: Sun, 23 Apr 2006 10:58:28 -0000 Subject: [Bug 40763] Re: CCMP decrypt failed errors with ipw2200 References: <20060422134633.30538.35482.malonedeb@gangotri.ubuntu.com> Message-ID: <20060423105828.17670.845.malone@gandwana.ubuntu.com> Ok, if adding hwcrypt=1 to driver options, this indicates that this is either a configuration or a driver issue. It seems to me that this is not a problem of the wpasupplicant package, since the debug log of wpasupplicant indicates a successful authentication. I'm reassinging this bug to the kernel, since it seems that on your machine hwcrypt is off by default but should be on for wpa encryption. ** Changed in: wpasupplicant (Ubuntu) Sourcepackagename: wpasupplicant => linux-source-2.6.15 Binarypackagename: wpasupplicant => None -- CCMP decrypt failed errors with ipw2200 https://launchpad.net/bugs/40763 From jm-ubuntu at jmason.org Sun Apr 23 11:00:36 2006 From: jm-ubuntu at jmason.org (Justin Mason) Date: Sun, 23 Apr 2006 11:00:36 -0000 Subject: [Bug 12483] Re: laptop-mode/IDE-APM hang on various laptops References: <20060113132548.21012.74332.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060423110036.17670.73306.launchpad@gandwana.ubuntu.com> ** Attachment added: "lspci -v output for Thinkpad T40" http://librarian.launchpad.net/2277404/t40.lspci -- laptop-mode/IDE-APM hang on various laptops https://launchpad.net/bugs/12483 From siretart at tauware.de Sun Apr 23 11:03:02 2006 From: siretart at tauware.de (Reinhard Tartler) Date: Sun, 23 Apr 2006 11:03:02 -0000 Subject: [Bug 12483] Re: laptop-mode/IDE-APM hang on various laptops References: <20060113132548.21012.74332.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060423110302.30501.3781.launchpad@gangotri.ubuntu.com> ** Attachment added: "Hardware information of R40 2722 B3G" http://librarian.launchpad.net/2277405/hardware_info_R40_2722_B3G -- laptop-mode/IDE-APM hang on various laptops https://launchpad.net/bugs/12483 From miles.lane at gmaIl.com Sun Apr 23 11:33:58 2006 From: miles.lane at gmaIl.com (Miles Lane) Date: Sun, 23 Apr 2006 11:33:58 -0000 Subject: [Bug 40883] Touching keyboard keys doesn't cause laptop to resume References: <20060423074031.17643.93780.malonedeb@gandwana.ubuntu.com> Message-ID: <20060423113358.30538.98232.launchpad@canonical@gangotri.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: I am running Dapper with all the latest updates: acpi 0.09-1 acpi-support 0.72 acpid 1.0.4-1ubuntu10 Description: The logout dialog has a button for putting my laptop to sleep. When I move my mouse pointer over the button, text appears stating that I should be able to wake my laptop up by hitting any keyboard key or my power button. When I try hitting keyboard keys, nothing happens. I have to touch the little switch that is pressed when the laptop lid is closed. -- Touching keyboard keys doesn't cause laptop to resume https://launchpad.net/bugs/40883 From mjg59 at codon.org.uk Sun Apr 23 11:33:58 2006 From: mjg59 at codon.org.uk (Matthew Garrett) Date: Sun, 23 Apr 2006 11:33:58 -0000 Subject: [Bug 40883] Re: Touching keyboard keys doesn't cause laptop to resume References: <20060423074031.17643.93780.malonedeb@gandwana.ubuntu.com> Message-ID: <20060423113358.30538.7363.malone@gangotri.ubuntu.com> Does pressing a key on the keyboard wake it under Windows? ** Changed in: acpi (Ubuntu) Sourcepackagename: acpi => linux-source-2.6.15 -- Touching keyboard keys doesn't cause laptop to resume https://launchpad.net/bugs/40883 From siretart at tauware.de Sun Apr 23 11:59:24 2006 From: siretart at tauware.de (Reinhard Tartler) Date: Sun, 23 Apr 2006 11:59:24 -0000 Subject: [Bug 35213] Re: hibernate fails when not on AC power on HP Pavilion ZT3000 - regression from breezy References: <20060316170910.6510.54248.malonedeb@gangotri.ubuntu.com> Message-ID: <20060423115924.17670.24213.malone@gandwana.ubuntu.com> >> grep -i laptop_mode /etc/default/acpi-support ENABLE_LAPTOP_MODE=false and I'm affected as well :( -- hibernate fails when not on AC power on HP Pavilion ZT3000 - regression from breezy https://launchpad.net/bugs/35213 From webmaster at mikeasoft.com Sun Apr 23 12:01:50 2006 From: webmaster at mikeasoft.com (Michael Sheldon) Date: Sun, 23 Apr 2006 12:01:50 -0000 Subject: [Bug 37472] Re: the keyboard don't work perfectly on laptops acer travelmate 2300 series with Dapper References: <20060331122206.23707.692.malonedeb@gandwana.ubuntu.com> Message-ID: <20060423120150.30538.84145.malone@gangotri.ubuntu.com> I'm experiencing this problem with an Acer 1514. Outside of X keys are skipped, inside X keys are both skipped and repeated (looks to me as if the release signal isn't being sent, since pressing the key again will usually stop repeating and other keys can be pressed whilst it repeats). This worked correctly in Breezy. -- the keyboard don't work perfectly on laptops acer travelmate 2300 series with Dapper https://launchpad.net/bugs/37472 From ubuntu-bugzilla at fdnet.biz Sun Apr 23 12:40:54 2006 From: ubuntu-bugzilla at fdnet.biz (Francis) Date: Sun, 23 Apr 2006 12:40:54 -0000 Subject: [Bug 40850] Mounting my USB drive take long References: <20060422230440.17643.26503.malonedeb@gandwana.ubuntu.com> Message-ID: <20060423124054.17670.95989.launchpad@canonical@gandwana.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Needs Info Description: In breezy, my external hard drive (usb2) mounted very quickly. With dapper, it takes 2-3 minutes to mount. It's long to mount manually with "mount" and also automatically with GNOME when I switch on my hard drive. -- Mounting my USB drive take long https://launchpad.net/bugs/40850 From samtygier at yahoo.co.uk Sun Apr 23 12:40:54 2006 From: samtygier at yahoo.co.uk (sam tygier) Date: Sun, 23 Apr 2006 12:40:54 -0000 Subject: [Bug 40850] Re: Mounting my USB drive take long References: <20060422230440.17643.26503.malonedeb@gandwana.ubuntu.com> Message-ID: <20060423124054.17670.72887.malone@gandwana.ubuntu.com> can you post the out put of dmesg | tail -n 50 after pluggin in the drive ** Changed in: Ubuntu Sourcepackagename: None => linux-source-2.6.15 Status: Unconfirmed => Needs Info -- Mounting my USB drive take long https://launchpad.net/bugs/40850 From webmaster at mikeasoft.com Sun Apr 23 12:41:48 2006 From: webmaster at mikeasoft.com (Michael Sheldon) Date: Sun, 23 Apr 2006 12:41:48 -0000 Subject: [Bug 37472] Re: the keyboard don't work perfectly on laptops acer travelmate 2300 series with Dapper References: <20060331122206.23707.692.malonedeb@gandwana.ubuntu.com> Message-ID: <20060423124148.4079.3713.malone@gangotri.ubuntu.com> Under further investigation this appears to be primarily an X bug. Booting with the previous kernel (from Breezy, 2.6.12-10) results in the same behaviour. -- the keyboard don't work perfectly on laptops acer travelmate 2300 series with Dapper https://launchpad.net/bugs/37472 From bart at samwel.tk Sun Apr 23 12:42:28 2006 From: bart at samwel.tk (Bart Samwel) Date: Sun, 23 Apr 2006 12:42:28 -0000 Subject: [Bug 12483] Re: laptop-mode/IDE-APM hang on various laptops References: <20060113132548.21012.74332.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060423124228.4079.32123.malone@gangotri.ubuntu.com> Updated data aggregation: R40, T41 and T42: 82801DBM (ICH4-M) IDE Controller (rev 01) Asus M6Ne: 82801DBM (ICH4-M) IDE Controller (rev 03) T40 and R51: 82801DBM (ICH4) Ultra ATA Storage Controller (rev 01) To Justin: Yeah, I'd expect it to report ICH4-M if it were Centrino. I guess that the ICH4 controller is the "desktop" edition of the same chip. -- laptop-mode/IDE-APM hang on various laptops https://launchpad.net/bugs/12483 From joshshopping at karensnyder.com Sun Apr 23 13:38:16 2006 From: joshshopping at karensnyder.com (Josh) Date: Sun, 23 Apr 2006 13:38:16 -0000 Subject: [Bug 40846] Kernel Panic Dapper Flight 6 References: <20060422221422.30538.22738.malonedeb@gangotri.ubuntu.com> Message-ID: <20060423133816.4110.84414.launchpad@canonical@gangotri.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: When I attempt to: Kill/restart GDM Log out from GDM Switch Users There is a kernel panic. It is not recorded anywhere in /var/log. It is possible that there is a display driver problem (fglrx) -- Kernel Panic Dapper Flight 6 https://launchpad.net/bugs/40846 From m.lutzer at gmx.de Sun Apr 23 13:32:47 2006 From: m.lutzer at gmx.de (Lutz) Date: Sun, 23 Apr 2006 13:32:47 -0000 Subject: [Bug 40109] Re: sleep failed when xmms is open References: <20060419073118.21557.35356.malonedeb@gangotri.ubuntu.com> Message-ID: <20060423133247.4110.45706.malone@gangotri.ubuntu.com> Please assign this bug to the xmms package instead of kernel packages! ** Summary changed: - sleep failed when network traffic + sleep failed when xmms is open ** Description changed: I use a MSI Megabook S260 with Ubuntu Breezy installed on. Sleep mode - works fine, usually. When I use a filesharing application which cause - much traffic (on the ethernet device) or downloading a big file the - laptop is not going to sleep properly. Instead of sleep only the screen - is locked. After unlocking I recognize that the network and usb is not - working anymore. Also to remove/unload the 8139too module does not work, - it hangs. Additionally to shutdown the system does not work properly: I - have to kill the X system (ctrl + alt + <-) than the system shuts down. - All this works fine when I don't try to set the system to sleep while - having much network traffic. I experienced such behaviour several times. - Potentally bugs #38305 and #24336 are relevant? + works fine, usually. When xmms is open, the system screen is locked + instead of going to sleep. After unlocking I recognize that the network + and usb is not working anymore. Also to remove/unload the 8139too module + does not work, it hangs. When I kill xmms the system goes into sleep + mode immediately. + + PS: Correlation between network traffic and this problem as reported + before seems to be incorrect. (instead my usage of xmms and network + traffic seems to correlate :-) ) -- sleep failed when xmms is open https://launchpad.net/bugs/40109 From dennis at kaarsemaker.net Sun Apr 23 13:38:16 2006 From: dennis at kaarsemaker.net (Dennis Kaarsemaker) Date: Sun, 23 Apr 2006 13:38:16 -0000 Subject: [Bug 40846] Re: Kernel Panic Dapper Flight 6 References: <20060422221422.30538.22738.malonedeb@gangotri.ubuntu.com> Message-ID: <20060423133816.4110.70615.launchpad@gangotri.ubuntu.com> ** Changed in: linux (Ubuntu) Sourcepackagename: linux => linux-source-2.6.15 -- Kernel Panic Dapper Flight 6 https://launchpad.net/bugs/40846 From gpothier at gmail.com Sun Apr 23 14:06:33 2006 From: gpothier at gmail.com (gpothier) Date: Sun, 23 Apr 2006 14:06:33 -0000 Subject: [Bug 40929] ACPI S3 broken on Dell Latitude D810, worked in Breezy References: <20060423134659.17670.59364.malonedeb@gandwana.ubuntu.com> Message-ID: <20060423140633.17670.2930.launchpad@canonical@gandwana.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: Hi, As many people I'm having troubles with resuming from suspend. As I didn't find an existing bug report with the exact same symptoms I opened this one. So here it goes. The laptop goes into stanby mode with no problem: screen is turned off, and after a few seconds the power led starts to repeatedly fade in/out, indicating that the machine is suspended. The problem is when trying to resume. Sometimes it works perfectly fine, sometimes it doesn't. I've never been able to successfully suspend and resume more than twice, ie. it always fail to resume the third time, or sometimes the second or first time. When it fails to resume, the symptoms are the following: a few seconds after I press the power on switch, the HDD led turns on for a fraction of a second, then off for a fraction of a second, and then turns on indefinitely. In this situation, the computer is responsive while I don't try to access the disk. Sometimes X even shows up and everything works fine until an application tries to access the HDD (at which point the app freezes but other apps are still responsive). Sometimes X doesn't show up but pressing the caps lock key turns on and off the caps led. I have an ATI Mobility X600 card and I'm using the fglrx driver installed from the Dapper repository. But as X sometimes shows up on failed resumes, it seems fglrx has nothing to do here. Moreoever I also tried to suspend resume with kdm turned off, the results are the same. I tried with almost every imagineable combination of settings in acpi-support, but the results are almost always the same. The only notable difference is that when I set ACPI_SLEEP_MODE to standby instead of mem, it fails to suspend, but then the computer is usable again. I get this error "eth1: NETDEV_TX_BUSY returned; driver should report queue full via ieee_device->is_queue_full." The error shows up briefly on the screen, and appears in dmesg. Note that eth1 is a wireless card using the ipw2200 driver. Now, I noticed that with the usual sleep mode (mem), I sometimes see the same error on the screen. Resume never worked properly after this error showed up, but it also sometimes fails to work without me seeing this error. What could I do to help hunt down the problem? Regards, g -- ACPI S3 broken on Dell Latitude D810, worked in Breezy https://launchpad.net/bugs/40929 From samtygier at yahoo.co.uk Sun Apr 23 14:06:33 2006 From: samtygier at yahoo.co.uk (sam tygier) Date: Sun, 23 Apr 2006 14:06:33 -0000 Subject: [Bug 40929] Re: ACPI S3 broken on Dell Latitude D810, worked in Breezy References: <20060423134659.17670.59364.malonedeb@gandwana.ubuntu.com> Message-ID: <20060423140633.17670.89536.launchpad@gandwana.ubuntu.com> ** Changed in: Ubuntu Sourcepackagename: None => linux-source-2.6.15 -- ACPI S3 broken on Dell Latitude D810, worked in Breezy https://launchpad.net/bugs/40929 From stoodi at gmail.com Sun Apr 23 14:18:56 2006 From: stoodi at gmail.com (stoodi) Date: Sun, 23 Apr 2006 14:18:56 -0000 Subject: [Bug 40933] Notebook (MSI S260) doesn't boot when USB HUB connected. References: <20060423141856.17670.7331.malonedeb@gandwana.ubuntu.com> Message-ID: <20060423141856.17670.7331.malonedeb@gandwana.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 kernel-image-2.6.15-20-386-di (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: Notebook (MSI S260) doest't boot when hub (D-LINK DUB-H7) is connected. Kernel hangs on: [4294669.147000] PCI: Transparent bridge - 0000:00:1e.0 Adding options to kernel (noacpi, noapic) doesn't help. With this options, kernel hangs on: [4294669.175000] isapnp: Scanning for PnP cards... (with my custom kernel 2.6.16 it helps, system boots.) Notebook: lspci: 0000:00:00.0 Host bridge: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller (rev 04) 0000:00:02.0 VGA compatible controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 04) 0000:00:02.1 Display controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 04) 0000:00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 04) 0000:00:1d.1 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 04) 0000:00:1d.2 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 04) 0000:00:1d.3 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 (rev 04) 0000:00:1d.7 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 04) 0000:00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev d4) 0000:00:1e.2 Multimedia audio controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Audio Controller (rev 04) 0000:00:1e.3 Modem: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Modem Controller (rev 04) 0000:00:1f.0 ISA bridge: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge (rev 04) 0000:00:1f.1 IDE interface: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) IDE Controller (rev 04) 0000:00:1f.3 SMBus: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller (rev 04) 0000:01:03.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) 0000:01:05.0 CardBus bridge: O2 Micro, Inc. OZ711MP1/MS1 MemoryCardBus Controller (rev 21) 0000:01:05.2 0805: O2 Micro, Inc.: Unknown device 7120 (rev 01) 0000:01:05.3 Bridge: O2 Micro, Inc.: Unknown device 7130 (rev 01) 0000:01:05.4 FireWire (IEEE 1394): O2 Micro, Inc.: Unknown device 00f7 (rev 02) 0000:01:09.0 Network controller: Intel Corporation PRO/Wireless 2200BG (rev 05) 0000:02:00.0 Multimedia controller: Philips Semiconductors SAA7134 Video Broadcast Decoder (rev 01) lsusb when hub is connected and my usb devices: Bus 005 Device 011: ID 067b:3507 Prolific Technology, Inc. PL3507 ATAPI6 Bridge Bus 005 Device 010: ID 0603:00f2 Novatek Microelectronics Corp. Bus 005 Device 009: ID 0458:0039 KYE Systems Corp. (Mouse Systems) Bus 005 Device 007: ID 2001:f103 D-Link Corp. [hex] Bus 005 Device 001: ID 0000:0000 Bus 001 Device 001: ID 0000:0000 Bus 004 Device 001: ID 0000:0000 Bus 003 Device 001: ID 0000:0000 Bus 002 Device 004: ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode) Bus 002 Device 001: ID 0000:0000 dmesg: [4294667.296000] Linux version 2.6.15-20-386 (buildd at vernadsky) (gcc version 4.0.3 (Ubuntu 4.0.3-1ubuntu3)) #1 PREEMPT Tue Apr 4 17:48:51 UTC 2006 [4294667.296000] BIOS-provided physical RAM map: [4294667.296000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [4294667.296000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [4294667.296000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [4294667.296000] BIOS-e820: 0000000000100000 - 000000003f7d0000 (usable) [4294667.296000] BIOS-e820: 000000003f7d0000 - 000000003f7de000 (ACPI data) [4294667.296000] BIOS-e820: 000000003f7de000 - 000000003f800000 (ACPI NVS) [4294667.296000] BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved) [4294667.296000] 119MB HIGHMEM available. [4294667.296000] 896MB LOWMEM available. [4294667.296000] found SMP MP-table at 000ff780 [4294667.296000] On node 0 totalpages: 260048 [4294667.296000] DMA zone: 4096 pages, LIFO batch:0 [4294667.296000] DMA32 zone: 0 pages, LIFO batch:0 [4294667.296000] Normal zone: 225280 pages, LIFO batch:31 [4294667.296000] HighMem zone: 30672 pages, LIFO batch:7 [4294667.296000] DMI 2.3 present. [4294667.296000] ACPI: RSDP (v000 MSI ) @ 0x000f79b0 [4294667.296000] ACPI: RSDT (v001 MSI 1012 0x10312005 MSFT 0x00000097) @ 0x3f7d0000 [4294667.296000] ACPI: FADT (v002 MSI 1012 0x10312005 MSFT 0x00000097) @ 0x3f7d0200 [4294667.296000] ACPI: MADT (v001 MSI 1012 0x10312005 MSFT 0x00000097) @ 0x3f7d0390 [4294667.296000] ACPI: MCFG (v001 MSI 1012 0x10312005 MSFT 0x00000097) @ 0x3f7d03f0 [4294667.296000] ACPI: OEMB (v001 MSI 1012 0x10312005 MSFT 0x00000097) @ 0x3f7de040 [4294667.296000] ACPI: MCFG (v001 MSI 1012 0x10312005 MSFT 0x00000097) @ 0x3f7d4120 [4294667.296000] ACPI: SSDT (v001 AMI CPU1PM 0x00000001 INTL 0x02002026) @ 0x3f7d4160 [4294667.296000] ACPI: DSDT (v001 MSI 1012 0x10312005 INTL 0x02002026) @ 0x00000000 [4294667.296000] ACPI: PM-Timer IO Port: 0x808 [4294667.296000] ACPI: Local APIC address 0xfee00000 [4294667.296000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [4294667.296000] Processor #0 6:13 APIC version 20 [4294667.296000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [4294667.296000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 [4294667.296000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [4294667.296000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [4294667.296000] ACPI: IRQ0 used by override. [4294667.296000] ACPI: IRQ2 used by override. [4294667.296000] ACPI: IRQ9 used by override. [4294667.296000] Enabling APIC mode: Flat. Using 1 I/O APICs [4294667.296000] Using ACPI (MADT) for SMP configuration information [4294667.296000] Allocating PCI resources starting at 40000000 (gap: 3f800000:c0380000) [4294667.296000] Built 1 zonelists [4294667.296000] Kernel command line: root=/dev/hda7 ro quiet splash [4294667.296000] mapped APIC to ffffd000 (fee00000) [4294667.296000] mapped IOAPIC to ffffc000 (fec00000) [4294667.296000] Initializing CPU#0 [4294667.296000] PID hash table entries: 4096 (order: 12, 65536 bytes) [4294667.296000] Detected 1729.662 MHz processor. [4294667.296000] Using pmtmr for high-res timesource [4294667.296000] Console: colour VGA+ 80x25 [4294668.309000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [4294668.310000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [4294668.340000] Memory: 1020752k/1040192k available (1973k kernel code, 18652k reserved, 601k data, 288k init, 122688k highmem) [4294668.340000] Checking if this processor honours the WP bit even in supervisor mode... Ok. [4294668.400000] Calibrating delay using timer specific routine.. 3461.33 BogoMIPS (lpj=1730667) [4294668.400000] Security Framework v1.0.0 initialized [4294668.400000] SELinux: Disabled at boot. [4294668.400000] Mount-cache hash table entries: 512 [4294668.400000] CPU: After generic identify, caps: afe9fbff 00100000 00000000 00000000 00000180 00000000 00000000 [4294668.400000] CPU: After vendor identify, caps: afe9fbff 00100000 00000000 00000000 00000180 00000000 00000000 [4294668.400000] CPU: L1 I cache: 32K, L1 D cache: 32K [4294668.400000] CPU: L2 cache: 2048K [4294668.400000] CPU: After all inits, caps: afe9fbff 00100000 00000000 00000040 00000180 00000000 00000000 [4294668.400000] mtrr: v2.0 (20020519) [4294668.400000] CPU: Intel(R) Pentium(R) M processor 1.73GHz stepping 08 [4294668.400000] Enabling fast FPU save and restore... done. [4294668.400000] Enabling unmasked SIMD FPU exception support... done. [4294668.400000] Checking 'hlt' instruction... OK. [4294668.404000] checking if image is initramfs... it is [4294668.990000] Freeing initrd memory: 6395k freed [4294668.996000] ACPI: Looking for DSDT ... not found! [4294669.030000] ENABLING IO-APIC IRQs [4294669.030000] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [4294669.141000] NET: Registered protocol family 16 [4294669.141000] EISA bus registered [4294669.141000] ACPI: bus type pci registered [4294669.141000] PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=2 [4294669.141000] ACPI: 2 duplicate MCFG table ignored. [4294669.141000] PCI: Using MMCONFIG [4294669.141000] ACPI: Subsystem revision 20051216 [4294669.144000] ACPI: Interpreter enabled [4294669.144000] ACPI: Using IOAPIC for interrupt routing [4294669.145000] ACPI: PCI Root Bridge [PCI0] (0000:00) [4294669.145000] PCI: Probing PCI hardware (bus 00) [4294669.146000] Boot video device is 0000:00:02.0 [4294669.147000] PCI quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO [4294669.147000] PCI quirk: region 0480-04bf claimed by ICH6 GPIO [4294669.147000] PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 [4294669.147000] PCI: Transparent bridge - 0000:00:1e.0 [4294669.147000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [4294669.158000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [4294669.159000] ACPI: Embedded Controller [EC] (gpe 29) interrupt mode. [4294669.164000] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 6 7 *10 11 12 14 15) [4294669.164000] ACPI: PCI Interrupt Link [LNKB] (IRQs *4 5 6 7 10 11 12 14 15) [4294669.165000] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 6 *7 10 11 12 14 15) [4294669.165000] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 *5 6 7 10 11 12 14 15) [4294669.165000] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 *6 7 10 11 12 14 15) [4294669.165000] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 6 7 10 11 12 14 15) *0, disabled. [4294669.166000] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 *5 6 7 10 11 12 14 15) [4294669.166000] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 6 7 10 *11 12 14 15) [4294669.166000] Linux Plug and Play Support v0.97 (c) Adam Belay [4294669.166000] pnp: PnP ACPI init [4294669.168000] pnp: PnP ACPI: found 13 devices [4294669.168000] PnPBIOS: Disabled by ACPI PNP [4294669.168000] PCI: Using ACPI for IRQ routing [4294669.168000] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [4294669.174000] PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0 [4294669.174000] PCI: Bus 2, cardbus bridge: 0000:01:05.0 [4294669.174000] IO window: 0000e000-0000e0ff [4294669.174000] IO window: 0000e400-0000e4ff [4294669.174000] PREFETCH window: 40000000-41ffffff [4294669.174000] MEM window: 44000000-45ffffff [4294669.174000] PCI: Bridge: 0000:00:1e.0 [4294669.174000] IO window: e000-efff [4294669.174000] MEM window: fbf00000-fbffffff [4294669.174000] PREFETCH window: 40000000-42ffffff [4294669.174000] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [4294669.174000] ACPI: PCI Interrupt 0000:01:05.0[A] -> GSI 19 (level, low) -> IRQ 169 [4294669.174000] audit: initializing netlink socket (disabled) [4294669.174000] audit(1145798750.173:1): initialized [4294669.174000] highmem bounce pool size: 64 pages [4294669.175000] VFS: Disk quotas dquot_6.5.1 [4294669.175000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [4294669.175000] Initializing Cryptographic API [4294669.175000] io scheduler noop registered [4294669.175000] io scheduler anticipatory registered [4294669.175000] io scheduler deadline registered [4294669.175000] io scheduler cfq registered [4294669.175000] isapnp: Scanning for PnP cards... [4294669.532000] isapnp: No Plug & Play device found [4294669.544000] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [4294669.550000] i8042.c: Detected active multiplexing controller, rev 1.1. [4294669.553000] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [4294669.554000] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [4294669.554000] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [4294669.555000] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [4294669.556000] serio: i8042 KBD port at 0x60,0x64 irq 1 [4294669.556000] Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled [4294669.557000] ACPI: PCI Interrupt 0000:00:1e.3[B] -> GSI 20 (level, low) -> IRQ 177 [4294669.557000] ACPI: PCI interrupt for device 0000:00:1e.3 disabled [4294669.557000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [4294669.557000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [4294669.557000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [4294669.557000] ACPI: bus type ide registered [4294669.558000] mice: PS/2 mouse device common for all mice [4294669.559000] EISA: Probing bus 0 at eisa.0 [4294669.559000] EISA: Detected 0 cards. [4294669.559000] NET: Registered protocol family 2 [4294669.570000] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [4294669.570000] TCP established hash table entries: 131072 (order: 7, 524288 bytes) [4294669.572000] TCP bind hash table entries: 65536 (order: 6, 262144 bytes) [4294669.572000] TCP: Hash tables configured (established 131072 bind 65536) [4294669.572000] TCP reno registered [4294669.572000] TCP bic registered [4294669.572000] NET: Registered protocol family 1 [4294669.572000] NET: Registered protocol family 8 [4294669.572000] NET: Registered protocol family 20 [4294669.572000] Using IPI Shortcut mode [4294669.572000] ACPI wakeup devices: [4294669.572000] LAN AUDI MC97 [4294669.572000] ACPI: (supports S0 S3 S4 S5) [4294669.572000] Freeing unused kernel memory: 288k freed [4294669.578000] input: AT Translated Set 2 keyboard as /class/input/input0 [4294669.632000] vga16fb: initializing [4294669.632000] vga16fb: mapped to 0xc00a0000 [4294669.752000] Console: switching to colour frame buffer device 80x25 [4294669.752000] fb0: VGA16 VGA frame buffer device [4294670.887000] Capability LSM initialized [4294670.913000] ACPI: CPU0 (power states: C1[C1] C2[C2]) [4294670.913000] ACPI: Processor [CPU1] (supports 8 throttling states) [4294670.919000] ACPI: Thermal Zone [THRM] (39 C) [4294671.263000] ICH6: IDE controller at PCI slot 0000:00:1f.1 [4294671.263000] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 185 [4294671.263000] ICH6: chipset revision 4 [4294671.263000] ICH6: not 100% native mode: will probe irqs later [4294671.263000] ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:DMA [4294671.263000] ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:pio, hdd:pio [4294671.263000] Probing IDE interface ide0... [4294671.527000] hda: TOSHIBA MK6025GAS, ATA DISK drive [4294671.935000] hdb: PHILIPS DVD+/-RW SDVD8441, ATAPI CD/DVD-ROM drive [4294671.986000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [4294671.986000] Probing IDE interface ide1... [4294672.509000] hda: max request size: 128KiB [4294672.557000] hda: 117210240 sectors (60011 MB), CHS=65535/16/63, UDMA(100) [4294672.557000] hda: cache flushes supported [4294672.557000] hda: hda1 hda2 < hda5 hda6 hda7 hda8 hda9 > [4294672.654000] hdb: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33) [4294672.654000] Uniform CD-ROM driver Revision: 3.20 [4294673.111000] usbcore: registered new driver usbfs [4294673.111000] usbcore: registered new driver hub [4294673.112000] USB Universal Host Controller Interface driver v2.3 [4294673.112000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 193 [4294673.112000] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [4294673.112000] uhci_hcd 0000:00:1d.0: UHCI Host Controller [4294673.113000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [4294673.113000] uhci_hcd 0000:00:1d.0: irq 193, io base 0x0000d880 [4294673.114000] hub 1-0:1.0: USB hub found [4294673.114000] hub 1-0:1.0: 2 ports detected [4294673.215000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 169 [4294673.215000] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [4294673.215000] uhci_hcd 0000:00:1d.1: UHCI Host Controller [4294673.215000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 [4294673.215000] uhci_hcd 0000:00:1d.1: irq 169, io base 0x0000d800 [4294673.215000] hub 2-0:1.0: USB hub found [4294673.215000] hub 2-0:1.0: 2 ports detected [4294673.316000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 185 [4294673.316000] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [4294673.316000] uhci_hcd 0000:00:1d.2: UHCI Host Controller [4294673.316000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 [4294673.316000] uhci_hcd 0000:00:1d.2: irq 185, io base 0x0000d480 [4294673.316000] hub 3-0:1.0: USB hub found [4294673.316000] hub 3-0:1.0: 2 ports detected [4294673.417000] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 201 [4294673.417000] PCI: Setting latency timer of device 0000:00:1d.3 to 64 [4294673.417000] uhci_hcd 0000:00:1d.3: UHCI Host Controller [4294673.417000] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 [4294673.417000] uhci_hcd 0000:00:1d.3: irq 201, io base 0x0000d400 [4294673.417000] hub 4-0:1.0: USB hub found [4294673.417000] hub 4-0:1.0: 2 ports detected [4294673.519000] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 193 [4294673.519000] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [4294673.519000] ehci_hcd 0000:00:1d.7: EHCI Host Controller [4294673.519000] ehci_hcd 0000:00:1d.7: debug port 1 [4294673.519000] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [4294673.519000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 [4294673.519000] ehci_hcd 0000:00:1d.7: irq 193, io mem 0xfbe3bc00 [4294673.522000] usb 2-2: new full speed USB device using uhci_hcd and address 2 [4294673.523000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [4294673.523000] hub 5-0:1.0: USB hub found [4294673.523000] hub 5-0:1.0: 8 ports detected [4294673.636000] Probing IDE interface ide1... [4294674.022000] usb 2-2: new full speed USB device using uhci_hcd and address 3 [4294674.339000] Attempting manual resume [4294674.377000] ReiserFS: hda7: found reiserfs format "3.6" with standard journal [4294674.865000] ReiserFS: hda7: using ordered data mode [4294674.874000] ReiserFS: hda7: journal params: device hda7, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 [4294674.874000] ReiserFS: hda7: checking transaction log (hda7) [4294674.940000] ReiserFS: hda7: Using r5 hash to sort names [4294684.080000] usb 5-3: new high speed USB device using ehci_hcd and address 3 [4294684.194000] hub 5-3:1.0: USB hub found [4294684.194000] hub 5-3:1.0: 7 ports detected [4294684.462000] usb 5-3.3: new low speed USB device using ehci_hcd and address 4 [4294684.711000] usb 5-3.4: new low speed USB device using ehci_hcd and address 5 [4294685.211000] usb 5-3.1: new high speed USB device using ehci_hcd and address 6 [4294686.907000] Linux agpgart interface v0.101 (c) Dave Jones [4294686.911000] agpgart: Detected an Intel 915GM Chipset. [4294686.912000] agpgart: Detected 7932K stolen memory. [4294686.928000] agpgart: AGP aperture is 256M @ 0xd0000000 [4294687.739000] Bluetooth: Core ver 2.8 [4294687.739000] NET: Registered protocol family 31 [4294687.739000] Bluetooth: HCI device and connection manager initialized [4294687.739000] Bluetooth: HCI socket layer initialized [4294687.784000] hw_random: RNG not detected [4294687.833000] Bluetooth: HCI USB driver ver 2.9 [4294687.834000] usbcore: registered new driver hci_usb [4294687.911000] ACPI: PCI Interrupt 0000:00:1e.2[A] -> GSI 17 (level, low) -> IRQ 209 [4294687.911000] PCI: Setting latency timer of device 0000:00:1e.2 to 64 [4294687.916000] input: PC Speaker as /class/input/input1 [4294687.988000] usbcore: registered new driver hiddev [4294687.993000] input: Genius NetScroll+ Superior as /class/input/input2 [4294687.993000] input: USB HID v1.10 Mouse [Genius NetScroll+ Superior] on usb-0000:00:1d.7-3.3 [4294687.996000] input: NOVATEK USB Keyboard as /class/input/input3 [4294687.996000] input: USB HID v1.10 Keyboard [NOVATEK USB Keyboard] on usb-0000:00:1d.7-3.4 [4294688.001000] input: NOVATEK USB Keyboard as /class/input/input4 [4294688.001000] input,hiddev96: USB HID v1.10 Device [NOVATEK USB Keyboard] on usb-0000:00:1d.7-3.4 [4294688.001000] usbcore: registered new driver usbhid [4294688.001000] drivers/usb/input/hid-core.c: v2.6:USB HID core driver [4294688.013000] SCSI subsystem initialized [4294688.047000] Initializing USB Mass Storage driver... [4294688.047000] scsi0 : SCSI emulation for USB Mass Storage devices [4294688.047000] usb-storage: device found at 6 [4294688.047000] usb-storage: waiting for device to settle before scanning [4294688.047000] usbcore: registered new driver usb-storage [4294688.047000] USB Mass Storage support registered. [4294688.160000] Real Time Clock Driver v1.12 [4294688.167000] Synaptics Touchpad, model: 1, fw: 5.9, id: 0xa56eb1, caps: 0x804713/0x0 [4294688.213000] input: SynPS/2 Synaptics TouchPad as /class/input/input5 [4294688.666000] 8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004) [4294688.686000] sdhci: Secure Digital Host Controller Interface driver, 0.10 [4294688.686000] sdhci: Copyright(c) Pierre Ossman [4294688.724000] intel8x0_measure_ac97_clock: measured 50527 usecs [4294688.724000] intel8x0: clocking to 48000 [4294688.724000] ACPI: PCI Interrupt 0000:01:05.0[A] -> GSI 19 (level, low) -> IRQ 169 [4294688.724000] Yenta: CardBus bridge found at 0000:01:05.0 [1462:0121] [4294688.724000] Yenta O2: res at 0x94/0xD4: 00/ea [4294688.724000] Yenta O2: enabling read prefetch/write burst [4294688.724000] 8139cp: pci dev 0000:01:03.0 (id 10ec:8139 rev 10) is not an 8139C+ compatible chip [4294688.724000] 8139cp: Try the "8139too" driver instead. [4294688.780000] ieee80211_crypt: registered algorithm 'NULL' [4294688.782000] ieee80211: 802.11 data/management/control stack, git-1.1.7 [4294688.782000] ieee80211: Copyright (C) 2004-2005 Intel Corporation [4294688.846000] Yenta: ISA IRQ mask 0x0cb8, PCI irq 169 [4294688.846000] Socket status: 30000820 [4294688.846000] pcmcia: parent PCI bridge I/O window: 0xe000 - 0xefff [4294688.846000] cs: IO port probe 0xe000-0xefff: clean. [4294688.847000] pcmcia: parent PCI bridge Memory window: 0xfbf00000 - 0xfbffffff [4294688.847000] pcmcia: parent PCI bridge Memory window: 0x40000000 - 0x42ffffff [4294688.847000] ACPI: PCI Interrupt 0000:01:05.2[A] -> GSI 19 (level, low) -> IRQ 169 [4294688.897000] sdhci: ============== REGISTER DUMP ============== [4294688.897000] sdhci: Sys addr: 0x00000000 | Version: 0x00002010 [4294688.897000] sdhci: Blk size: 0x00000000 | Blk cnt: 0x00000000 [4294688.897000] sdhci: Argument: 0x00000000 | Trn mode: 0x00000000 [4294688.897000] sdhci: Present: 0x01fa0000 | Host ctl: 0x00000000 [4294688.897000] sdhci: Power: 0x00000000 | Blk gap: 0x00000000 [4294688.897000] sdhci: Walk up: 0x00000000 | Clock: 0x00000000 [4294688.897000] sdhci: Timeout: 0x0000000e | Int stat: 0x00000000 [4294688.897000] sdhci: Int enab: 0x01ff00cf | Sig enab: 0x01ff00cf [4294688.897000] sdhci: AC12 err: 0x00000000 | Slot int: 0x00000000 [4294688.897000] sdhci: Caps: 0x038021a1 | Max curr: 0x00ffffff [4294688.897000] sdhci: =========================================== [4294688.947000] mmc0: SDHCI at 0xfbfff800 irq 169 DMA [4294689.182000] ieee1394: Initialized config rom entry `ip1394' [4294689.185000] ohci1394: $Rev: 1313 $ Ben Collins [4294689.185000] ACPI: PCI Interrupt 0000:01:05.4[A] -> GSI 19 (level, low) -> IRQ 169 [4294689.185000] ohci1394: fw-host0: Unexpected PCI resource length of 1000! [4294689.189000] ts: Compaq touchscreen protocol output [4294689.224000] 8139too Fast Ethernet driver 0.9.27 [4294689.225000] ACPI: PCI Interrupt 0000:01:03.0[A] -> GSI 22 (level, low) -> IRQ 217 [4294689.226000] eth0: RealTek RTL8139 at 0xf8bdcc00, 00:13:d3:af:dd:ae, IRQ 217 [4294689.226000] eth0: Identified 8139 chip type 'RTL-8101' [4294689.258000] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.1.1 [4294689.258000] ipw2200: Copyright(c) 2003-2006 Intel Corporation [4294689.263000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[169] MMIO=[fbffd000-fbffd7ff] Max Packet=[2048] [4294689.267000] ACPI: PCI Interrupt 0000:01:09.0[A] -> GSI 17 (level, low) -> IRQ 209 [4294689.267000] ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection [4294689.520000] ipw2200: Detected geography ZZM (11 802.11bg channels, 0 802.11a channels) [4294689.613000] pccard: CardBus card inserted into slot 0 [4294689.631000] cs: IO port probe 0x100-0x3af: excluding 0x170-0x177 0x370-0x377 [4294689.633000] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7 [4294689.633000] cs: IO port probe 0x820-0x8ff: clean. [4294689.633000] cs: IO port probe 0xc00-0xcf7: clean. [4294689.634000] cs: IO port probe 0xa00-0xaff: clean. [4294689.679000] Linux video capture interface: v1.00 [4294689.764000] saa7130/34: v4l2 driver version 0.2.14 loaded [4294689.764000] PCI: Enabling device 0000:02:00.0 (0000 -> 0002) [4294689.764000] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 19 (level, low) -> IRQ 169 [4294689.764000] saa7134[0]: found at 0000:02:00.0, rev: 1, irq: 169, latency: 0, mmio: 0x44000000 [4294689.764000] PCI: Setting latency timer of device 0000:02:00.0 to 64 [4294689.764000] saa7134[0]: subsystem: 1461:b7e9, board: AVerMedia Cardbus TV/Radio (E500) [card=46,insmod option] [4294689.764000] saa7134[0]: board init: gpio is 0 [4294689.797000] ieee80211_crypt: registered algorithm 'WEP' [4294689.898000] saa7134[0]: i2c eeprom 00: 61 14 e9 b7 ff ff ff ff ff ff ff ff ff ff ff ff [4294689.898000] saa7134[0]: i2c eeprom 10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [4294689.898000] saa7134[0]: i2c eeprom 20: ff d1 fb ff ff ff ff ff ff ff ff ff ff ff ff ff [4294689.898000] saa7134[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [4294689.898000] saa7134[0]: i2c eeprom 40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [4294689.898000] saa7134[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [4294689.898000] saa7134[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [4294689.898000] saa7134[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [4294689.952000] tuner 0-0060: Returned more than 5 bytes. It is not a TEA5767 [4294689.952000] tuner 0-0060: chip found @ 0xc0 (saa7134[0]) [4294689.952000] tuner 0-0060: type set to 41 (Philips PAL_MK (FI1216 MK)) [4294689.954000] tuner 0-0061: chip found @ 0xc2 (saa7134[0]) [4294689.956000] saa7134[0]: registered device video0 [v4l2] [4294689.956000] saa7134[0]: registered device vbi0 [4294689.956000] saa7134[0]: registered device radio0 [4294689.984000] saa7134 ALSA driver for DMA sound loaded [4294689.984000] saa7134[0]/alsa: saa7134[0] at 0x44000000 irq 169 registered as card -1 [4294690.550000] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00dc1000bf5fd900] [4294690.655000] lp: driver loaded but no devices found [4294690.670000] sbp2: $Rev: 1306 $ Ben Collins [4294690.670000] ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1) [4294690.670000] ieee1394: sbp2: Try serialize_io=0 for better performance [4294690.995000] tda9887 0-0042: chip found @ 0x84 (saa7134[0]) [4294691.070000] Adding 2104472k swap on /dev/hda6. Priority:-1 extents:1 across:2104472k [4294693.047000] Vendor: WDC WD80 Model: 0JB-00FMA0 Rev: 13.0 [4294693.047000] Type: Direct-Access ANSI SCSI revision: 00 [4294693.048000] usb-storage: device scan complete [4294693.243000] SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB) [4294693.243000] sda: assuming drive cache: write through [4294693.244000] SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB) [4294693.244000] sda: assuming drive cache: write through [4294693.244000] sda: sda1 < sda5 > [4294693.256000] sd 0:0:0:0: Attached scsi disk sda [4294693.277000] NET: Registered protocol family 17 [4294693.280000] sd 0:0:0:0: Attached scsi generic sg0 type 0 [4294693.495000] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 [4294693.495000] md: bitmap version 4.39 [4294694.001000] NET: Registered protocol family 10 [4294694.001000] lo: Disabled Privacy Extensions [4294694.001000] IPv6 over IPv4 tunneling driver [4294694.721000] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel at redhat.com [4294695.370000] cdrom: open failed. [4294704.926000] eth1: no IPv6 routers present [4294705.692000] ReiserFS: hda8: found reiserfs format "3.6" with standard journal [4294709.350000] ReiserFS: hda8: using ordered data mode [4294709.372000] ReiserFS: hda8: journal params: device hda8, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 [4294709.372000] ReiserFS: hda8: checking transaction log (hda8) [4294709.412000] ReiserFS: hda8: Using r5 hash to sort names [4294709.509000] NTFS driver 2.1.25 [Flags: R/O MODULE]. [4294709.599000] NTFS volume version 3.1. [4294711.281000] ACPI: AC Adapter [ADP1] (on-line) [4294711.324000] pcc_acpi: loading... [4294711.334000] ACPI: Power Button (FF) [PWRF] [4294711.334000] ACPI: Power Button (CM) [PWRB] [4294711.334000] ACPI: Lid Switch [LID0] [4294711.334000] ACPI: Sleep Button (CM) [SLPB] [4294711.368000] ibm_acpi: ec object not found [4294711.382000] ACPI: Battery Slot [BAT1] (battery absent) [4294711.402000] ACPI: Video Device [IGFX] (multi-head: yes rom: no post: no) [4294720.088000] [drm] Initialized drm 1.0.0 20040925 [4294720.093000] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 201 [4294720.094000] [drm] Initialized i915 1.1.0 20040405 on minor 0: [4294720.094000] mtrr: base(0xd0020000) is not aligned on a size(0x640000) boundary [4294723.930000] apm: BIOS not found. [4294724.314000] hdb: drive_cmd: status=0x41 { DriveReady Error } [4294724.314000] hdb: drive_cmd: error=0x04 { AbortedCommand } [4294724.314000] ide: failed opcode was: 0xec [4294724.447000] hdb: drive_cmd: status=0x41 { DriveReady Error } [4294724.447000] hdb: drive_cmd: error=0x04 { AbortedCommand } [4294724.447000] ide: failed opcode was: 0xec [4294725.102000] Bluetooth: L2CAP ver 2.8 [4294725.102000] Bluetooth: L2CAP socket layer initialized [4294725.202000] Bluetooth: RFCOMM socket layer initialized [4294725.202000] Bluetooth: RFCOMM TTY layer initialized [4294725.202000] Bluetooth: RFCOMM ver 1.7 [4294774.212000] mtrr: base(0xd0660000) is not aligned on a size(0x640000) boundary [4294800.786000] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! [4295108.659000] ibm_acpi: ec object not found [4295238.573000] ibm_acpi: ec object not found [4297334.655000] ACPI: PCI interrupt for device 0000:01:03.0 disabled [4297334.700000] ACPI: PCI interrupt for device 0000:01:09.0 disabled [4297337.205000] Stopping tasks: ============================================================================================| [4297337.207000] hci_usb 2-2:1.1: no suspend for driver hci_usb? [4297337.207000] hci_usb 2-2:1.0: no suspend for driver hci_usb? [4297337.208000] ACPI-0517: *** Error: Method parse/execution failed [\_SB_.PCI0.IDE0.GTM_] (Node dffe72c0), AE_AML_PACKAGE_LIMIT [4297337.208000] ACPI-0517: *** Error: Method parse/execution failed [\_SB_.PCI0.IDE0.CHN0._GTM] (Node dffe7500), AE_AML_PACKAGE_LIMIT [4297337.209000] ACPI-0517: *** Error: Method parse/execution failed [\_SB_.PCI0.IDE0.GTM_] (Node dffe72c0), AE_AML_PACKAGE_LIMIT [4297337.209000] ACPI-0517: *** Error: Method parse/execution failed [\_SB_.PCI0.IDE0.CHN0._GTM] (Node dffe7500), AE_AML_PACKAGE_LIMIT [4297337.689000] ACPI: PCI interrupt for device 0000:01:05.0 disabled [4297337.689000] ACPI: PCI interrupt for device 0000:00:1e.2 disabled [4297337.689000] ACPI: PCI interrupt for device 0000:00:1d.7 disabled [4297337.700000] ACPI: PCI interrupt for device 0000:00:1d.3 disabled [4297337.700000] ACPI: PCI interrupt for device 0000:00:1d.2 disabled [4297337.700000] ACPI: PCI interrupt for device 0000:00:1d.1 disabled [4297337.700000] ACPI: PCI interrupt for device 0000:00:1d.0 disabled [4297337.700000] Back to C! [4303081.795000] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 201 [4303081.795000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 193 [4303081.795000] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [4303081.795000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 169 [4303081.795000] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [4303081.795000] mmc0: Got command interrupt even though no command operation was in progress. [4303081.795000] mmc0: Please report this to . [4303081.795000] sdhci: ============== REGISTER DUMP ============== [4303081.795000] sdhci: Sys addr: 0xffffffff | Version: 0x0000ffff [4303081.795000] sdhci: Blk size: 0x0000ffff | Blk cnt: 0x0000ffff [4303081.795000] sdhci: Argument: 0xffffffff | Trn mode: 0x0000ffff [4303081.795000] sdhci: Present: 0xffffffff | Host ctl: 0x000000ff [4303081.795000] sdhci: Power: 0x000000ff | Blk gap: 0x000000ff [4303081.795000] sdhci: Walk up: 0x000000ff | Clock: 0x0000ffff [4303081.795000] sdhci: Timeout: 0x000000ff | Int stat: 0xffffffff [4303081.795000] sdhci: Int enab: 0xffffffff | Sig enab: 0xffffffff [4303081.795000] sdhci: AC12 err: 0x0000ffff | Slot int: 0x0000ffff [4303081.795000] sdhci: Caps: 0xffffffff | Max curr: 0xffffffff [4303081.795000] sdhci: =========================================== [4303081.795000] mmc0: Unexpected card interrupt. Please report this to . [4303081.795000] sdhci: ============== REGISTER DUMP ============== [4303081.795000] sdhci: Sys addr: 0xffffffff | Version: 0x0000ffff [4303081.795000] sdhci: Blk size: 0x0000ffff | Blk cnt: 0x0000ffff [4303081.795000] sdhci: Argument: 0xffffffff | Trn mode: 0x0000ffff [4303081.795000] sdhci: Present: 0xffffffff | Host ctl: 0x000000ff [4303081.795000] sdhci: Power: 0x000000ff | Blk gap: 0x000000ff [4303081.795000] sdhci: Walk up: 0x000000ff | Clock: 0x0000ffff [4303081.795000] sdhci: Timeout: 0x000000ff | Int stat: 0xffffffff [4303081.795000] sdhci: Int enab: 0xffffffff | Sig enab: 0xffffffff [4303081.795000] sdhci: AC12 err: 0x0000ffff | Slot int: 0x0000ffff [4303081.795000] sdhci: Caps: 0xffffffff | Max curr: 0xffffffff [4303081.795000] sdhci: =========================================== [4303081.795000] mmc0: Unexpected bus power interrupt. Please report this to . [4303081.795000] sdhci: ============== REGISTER DUMP ============== [4303081.795000] sdhci: Sys addr: 0xffffffff | Version: 0x0000ffff [4303081.795000] sdhci: Blk size: 0x0000ffff | Blk cnt: 0x0000ffff [4303081.795000] sdhci: Argument: 0xffffffff | Trn mode: 0x0000ffff [4303081.795000] sdhci: Present: 0xffffffff | Host ctl: 0x000000ff [4303081.795000] sdhci: Power: 0x000000ff | Blk gap: 0x000000ff [4303081.795000] sdhci: Walk up: 0x000000ff | Clock: 0x0000ffff [4303081.795000] sdhci: Timeout: 0x000000ff | Int stat: 0xffffffff [4303081.795000] sdhci: Int enab: 0xffffffff | Sig enab: 0xffffffff [4303081.795000] sdhci: AC12 err: 0x0000ffff | Slot int: 0x0000ffff [4303081.795000] sdhci: Caps: 0xffffffff | Max curr: 0xffffffff [4303081.795000] sdhci: =========================================== [4303081.795000] mmc0: Unexpected auto CMD12 error. Please report this to . [4303081.795000] sdhci: ============== REGISTER DUMP ============== [4303081.795000] sdhci: Sys addr: 0xffffffff | Version: 0x0000ffff [4303081.795000] sdhci: Blk size: 0x0000ffff | Blk cnt: 0x0000ffff [4303081.795000] sdhci: Argument: 0xffffffff | Trn mode: 0x0000ffff [4303081.795000] sdhci: Present: 0xffffffff | Host ctl: 0x000000ff [4303081.795000] sdhci: Power: 0x000000ff | Blk gap: 0x000000ff [4303081.795000] sdhci: Walk up: 0x000000ff | Clock: 0x0000ffff [4303081.795000] sdhci: Timeout: 0x000000ff | Int stat: 0xffffffff [4303081.795000] sdhci: Int enab: 0xffffffff | Sig enab: 0xffffffff [4303081.795000] sdhci: AC12 err: 0x0000ffff | Slot int: 0x0000ffff [4303081.795000] sdhci: Caps: 0xffffffff | Max curr: 0xffffffff [4303081.795000] sdhci: =========================================== [4303081.796000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 185 [4303081.796000] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [4303081.796000] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 201 [4303081.796000] PCI: Setting latency timer of device 0000:00:1d.3 to 64 [4303081.807000] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 193 [4303081.807000] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [4303081.810000] ehci_hcd 0000:00:1d.7: debug port 1 [4303081.810000] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [4303081.814000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [4303081.814000] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [4303081.814000] ACPI: PCI Interrupt 0000:00:1e.2[A] -> GSI 17 (level, low) -> IRQ 209 [4303081.814000] PCI: Setting latency timer of device 0000:00:1e.2 to 64 [4303082.068000] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 185 [4303082.068000] ACPI: PCI Interrupt 0000:01:05.0[A] -> GSI 19 (level, low) -> IRQ 169 [4303082.068000] Yenta O2: res at 0x94/0xD4: 00/ea [4303082.068000] Yenta O2: enabling read prefetch/write burst [4303082.771000] ACPI: PCI Interrupt 0000:01:05.2[A] -> GSI 19 (level, low) -> IRQ 169 [4303082.771000] PCI: Enabling device 0000:01:05.4 (0080 -> 0082) [4303082.771000] ACPI: PCI Interrupt 0000:01:05.4[A] -> GSI 19 (level, low) -> IRQ 169 [4303083.419000] hdb: set_drive_speed_status: status=0x40 { DriveReady } [4303083.419000] ide: failed opcode was: unknown [4303083.559000] hci_usb 2-2:1.0: no resume for driver hci_usb? [4303083.559000] hci_usb 2-2:1.1: no resume for driver hci_usb? [4303083.559000] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 19 (level, low) -> IRQ 169 [4303083.559000] tda9887 0-0042: i2c i/o error: rc == -5 (should be 4) [4303083.559000] Restarting tasks... done [4303083.663000] usb 2-2: USB disconnect, address 3 [4303084.017000] usb 5-3: USB disconnect, address 3 [4303084.017000] usb 5-3.1: USB disconnect, address 6 [4303084.027000] usb 5-3.3: USB disconnect, address 4 [4303084.028000] usb 5-3.4: USB disconnect, address 5 [4303084.234000] usb 5-3: new high speed USB device using ehci_hcd and address 7 [4303084.297000] 0:0:0:0: rejecting I/O to dead device [4303084.297000] FAT: bread failed in fat_clusters_flush [4303084.348000] hub 5-3:1.0: USB hub found [4303084.348000] hub 5-3:1.0: 7 ports detected [4303084.771000] usb 5-3.3: new low speed USB device using ehci_hcd and address 9 [4303084.857000] input: Genius NetScroll+ Superior as /class/input/input6 [4303084.857000] input: USB HID v1.10 Mouse [Genius NetScroll+ Superior] on usb-0000:00:1d.7-3.3 [4303085.025000] usb 5-3.4: new low speed USB device using ehci_hcd and address 10 [4303085.108000] input: NOVATEK USB Keyboard as /class/input/input7 [4303085.109000] input: USB HID v1.10 Keyboard [NOVATEK USB Keyboard] on usb-0000:00:1d.7-3.4 [4303085.114000] input: NOVATEK USB Keyboard as /class/input/input8 [4303085.114000] input,hiddev96: USB HID v1.10 Device [NOVATEK USB Keyboard] on usb-0000:00:1d.7-3.4 [4303085.321000] usb 2-2: new full speed USB device using uhci_hcd and address 4 [4303085.651000] usb 5-3.1: new high speed USB device using ehci_hcd and address 11 [4303085.866000] scsi1 : SCSI emulation for USB Mass Storage devices [4303085.866000] usb-storage: device found at 11 [4303085.866000] usb-storage: waiting for device to settle before scanning [4303087.268000] 8139too Fast Ethernet driver 0.9.27 [4303087.268000] ACPI: PCI Interrupt 0000:01:03.0[A] -> GSI 22 (level, low) -> IRQ 217 [4303087.272000] eth0: RealTek RTL8139 at 0xf8bd0c00, 00:13:d3:af:dd:ae, IRQ 217 [4303087.272000] eth0: Identified 8139 chip type 'RTL-8101' [4303087.282000] ieee80211: 802.11 data/management/control stack, git-1.1.7 [4303087.282000] ieee80211: Copyright (C) 2004-2005 Intel Corporation [4303087.286000] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.1.1 [4303087.287000] ipw2200: Copyright(c) 2003-2006 Intel Corporation [4303087.288000] ACPI: PCI Interrupt 0000:01:09.0[A] -> GSI 17 (level, low) -> IRQ 209 [4303087.288000] ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection [4303087.438000] ipw2200: Detected geography ZZM (11 802.11bg channels, 0 802.11a channels) [4303087.450000] pcmcia: Detected deprecated PCMCIA ioctl usage. [4303087.450000] pcmcia: This interface will soon be removed from the kernel; please expect breakage unless you upgrade to new tools. [4303087.450000] pcmcia: see http://www.kernel.org/pub/linux/utils/kernel/pcmcia/pcmcia.html for details. [4303087.508000] eth1: NETDEV_TX_BUSY returned; driver should report queue full via ieee_device->is_queue_full. [4303088.283000] ACPI: Power Button (FF) [PWRF] [4303088.284000] ACPI: Power Button (CM) [PWRB] [4303088.284000] ACPI: Lid Switch [LID0] [4303088.284000] ACPI: Sleep Button (CM) [SLPB] [4303088.328000] ACPI: Thermal Zone [THRM] (35 C) [4303088.354000] ACPI: AC Adapter [ADP1] (on-line) [4303088.368000] ACPI: Battery Slot [BAT1] (battery absent) [4303090.866000] Vendor: WDC WD80 Model: 0JB-00FMA0 Rev: 13.0 [4303090.866000] Type: Direct-Access ANSI SCSI revision: 00 [4303090.868000] SCSI device sdb: 156301488 512-byte hdwr sectors (80026 MB) [4303090.868000] sdb: assuming drive cache: write through [4303090.869000] SCSI device sdb: 156301488 512-byte hdwr sectors (80026 MB) [4303090.869000] sdb: assuming drive cache: write through [4303090.869000] sdb: sdb1 < sdb5 > [4303090.894000] sd 1:0:0:0: Attached scsi disk sdb [4303090.894000] sd 1:0:0:0: Attached scsi generic sg0 type 0 [4303090.895000] usb-storage: device scan complete [4303091.231000] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! [4303097.855000] eth1: no IPv6 routers present -- Notebook (MSI S260) doesn't boot when USB HUB connected. https://launchpad.net/bugs/40933 From dennis at kaarsemaker.net Sun Apr 23 14:19:33 2006 From: dennis at kaarsemaker.net (Dennis Kaarsemaker) Date: Sun, 23 Apr 2006 14:19:33 -0000 Subject: [Bug 40253] Re: [Bug 40253] hibernate, sleep does not work References: <20060420004855.21526.1939.malonedeb@gangotri.ubuntu.com> Message-ID: <1145801974.6433.106.camel@mirage> Which video card driver? fglrx or ati? -- hibernate, sleep does not work https://launchpad.net/bugs/40253 From adconrad at 0c3.net Sun Apr 23 14:23:09 2006 From: adconrad at 0c3.net (Adam Conrad) Date: Sun, 23 Apr 2006 14:23:09 -0000 Subject: [Bug 33243] Re: tmpfs setup is unexpected References: <20060301110100.22115.62705.malonedeb@gandwana.ubuntu.com> Message-ID: <20060423142309.4079.30995.malone@gangotri.ubuntu.com> As Matt said, this is not a bug at all, and is the designed behaviour. ** Changed in: linux-restricted-modules-2.6.15 (Ubuntu) Status: Confirmed => Rejected -- tmpfs setup is unexpected https://launchpad.net/bugs/33243 From miles.lane at gmaIl.com Sun Apr 23 14:41:59 2006 From: miles.lane at gmaIl.com (Miles Lane) Date: Sun, 23 Apr 2006 14:41:59 -0000 Subject: [Bug 40883] Re: Touching keyboard keys doesn't cause laptop to resume References: <20060423074031.17643.93780.malonedeb@gandwana.ubuntu.com> Message-ID: <20060423144159.17670.25042.malone@gandwana.ubuntu.com> Yes, touching the keyboard does wake the machine under Windows. IIRC, touching the mouse wakes under Windows as well. -- Touching keyboard keys doesn't cause laptop to resume https://launchpad.net/bugs/40883 From brankgnol at gmail.com Sun Apr 23 14:50:10 2006 From: brankgnol at gmail.com (Tonio) Date: Sun, 23 Apr 2006 14:50:10 -0000 Subject: [Bug 21707] [Breezy] HP Omnibook XE2 - Cannot boot with acpi References: <20060113141420.21012.77660.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060423145010.4079.6701.launchpad@canonical@gangotri.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 acpi (Ubuntu) Severity: Normal Priority: Medium Status: Needs Info Description: Hello, At the reboot after a fresh installation of Ubuntu Breezy Preview Release, on an HP Omnibook XE2, reboot freeze in "Starting hotplug subsystem". The safe mode show a problem with acpi. A reboot with "acpi=off noacpi" works. That's the only problem with this laptop, touchpad, sound, etc... work fine. -- [Breezy] HP Omnibook XE2 - Cannot boot with acpi https://launchpad.net/bugs/21707 From sean at compusmith.biz Sun Apr 23 14:51:10 2006 From: sean at compusmith.biz (Sean Smith) Date: Sun, 23 Apr 2006 14:51:10 -0000 Subject: [Bug 39824] Install for Dapper Drake Flight 6 Fails Miserably References: <20060417005245.16443.77994.malonedeb@gandwana.ubuntu.com> Message-ID: <20060423145110.4110.97233.launchpad@canonical@gangotri.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Needs Info Description: Just try and install it The installer will not even run on my system unless APIC is disabled in BIOS or the installer is run with the noapic nolapic options. On my system, the Flight 6 installer bombs out at 58% of "select and install packages" while "preparing to configure ubuntu-desktop." Alt + F4'ing to the background process screen reveals that everytime it tries to configure a TTF font package it complains about the default font being missing and then does a "Regenerating font cache" after each one. Furthermore, it eventually gets to a message that says: main-menu[2085]: WARNING **: Configuring 'pkgsel' failed with error code 1 And the regular installer receives a red screen with the message: "An installation step failed. You can try to run the failing item again from the menu, or skip it and choose something else. The failing step is: Select and install software" -- Install for Dapper Drake Flight 6 Fails Miserably https://launchpad.net/bugs/39824 From stoodi at gmail.com Sun Apr 23 14:50:12 2006 From: stoodi at gmail.com (stoodi) Date: Sun, 23 Apr 2006 14:50:12 -0000 Subject: [Bug 40933] Re: Notebook (MSI S260) doesn't boot when USB HUB connected. References: <20060423141856.17670.7331.malonedeb@gandwana.ubuntu.com> Message-ID: <20060423145012.4079.89167.malone@gangotri.ubuntu.com> Problem is with my USB Keyboard, when connected direct to notebook, system boots without problems. -- Notebook (MSI S260) doesn't boot when USB HUB connected. https://launchpad.net/bugs/40933 From samtygier at yahoo.co.uk Sun Apr 23 14:50:51 2006 From: samtygier at yahoo.co.uk (sam tygier) Date: Sun, 23 Apr 2006 14:50:51 -0000 Subject: [Bug 39824] Re: Install for Dapper Drake Flight 6 Fails Miserably References: <20060417005245.16443.77994.malonedeb@gandwana.ubuntu.com> Message-ID: <20060423145051.17643.32619.malone@gandwana.ubuntu.com> can you post the output of dmidecode ** Changed in: Ubuntu Sourcepackagename: None => linux-source-2.6.15 Status: Unconfirmed => Needs Info -- Install for Dapper Drake Flight 6 Fails Miserably https://launchpad.net/bugs/39824 From ironweed at w223.com Sun Apr 23 14:53:13 2006 From: ironweed at w223.com (spiderwort) Date: Sun, 23 Apr 2006 14:53:13 -0000 Subject: [Bug 32752] Re: Dell PERC 2/SC (AMI Megaraid 466(?)) not working References: <20060224172951.27067.39784.malonedeb@gangotri.ubuntu.com> Message-ID: <20060423145313.4110.95400.malone@gangotri.ubuntu.com> Not fixed in Dapper Flight 6, nor in Dapper Beta. lspci -vv for my machine reports as follows: 0000:00:06.0 PCI bridge: Intel Corporation 80960RP [i960 RP Microprocessor/Bridge] (rev 03) (prog-if 00 [Normal decode]) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Reset- FastB2B- 0000:00:06.1 I2O: Intel Corporation 80960RP [i960RP Microprocessor] (rev 03) (prog-if 01) Subsystem: American Megatrends Inc. MegaRAID 438 Ultra2 LVD RAID Controller Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Message-ID: <20060423145009.4079.34299.launchpad@gangotri.ubuntu.com> ** Changed in: acpi (Ubuntu) Sourcepackagename: acpi => linux-source-2.6.15 Status: Confirmed => Needs Info -- [Breezy] HP Omnibook XE2 - Cannot boot with acpi https://launchpad.net/bugs/21707 From joshshopping at karensnyder.com Sun Apr 23 14:58:09 2006 From: joshshopping at karensnyder.com (Josh) Date: Sun, 23 Apr 2006 14:58:09 -0000 Subject: [Bug 40846] Re: Kernel Panic Dapper Flight 6 References: <20060422221422.30538.22738.malonedeb@gangotri.ubuntu.com> Message-ID: <20060423145810.17643.53745.malone@gandwana.ubuntu.com> I would gladly take a photo. I will have to wait a couple days for a camera though. ** Description changed: When I attempt to: - Kill/restart GDM + Kill/restart GDM (with a user logged in) Log out from GDM Switch Users There is a kernel panic. It is not recorded anywhere in /var/log. It is possible that there is a display driver problem (fglrx) -- Kernel Panic Dapper Flight 6 https://launchpad.net/bugs/40846 From mjg59 at codon.org.uk Sun Apr 23 14:57:53 2006 From: mjg59 at codon.org.uk (Matthew Garrett) Date: Sun, 23 Apr 2006 14:57:53 -0000 Subject: [Bug 40844] Re: Wireless killswitch Error References: <20060422220733.17670.41147.malonedeb@gandwana.ubuntu.com> Message-ID: <20060423145753.17643.46774.malone@gandwana.ubuntu.com> Are you sure you're not misreading the on/off state on the switch? Toshiba seem to use "on" to mean "wireless on", not "killswitch on". It seems to be mechanical on the hardware I have, so I'd be surprised if there's anything in Linux that could get it wrong. -- Wireless killswitch Error https://launchpad.net/bugs/40844 From mjg59 at codon.org.uk Sun Apr 23 14:56:34 2006 From: mjg59 at codon.org.uk (Matthew Garrett) Date: Sun, 23 Apr 2006 14:56:34 -0000 Subject: [Bug 27778] Re: ipw2200 Firmware Error on Install References: <20060113151913.29386.20905.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060423145634.17643.67815.malone@gandwana.ubuntu.com> Greg, the error implies that the firmware is missing. Do you have the appropriate linux-restricted-modules package installed? If you rmmod/modprobe, can you paste the kernel output? -- ipw2200 Firmware Error on Install https://launchpad.net/bugs/27778 From janl at langfeldt.net Sun Apr 23 15:29:52 2006 From: janl at langfeldt.net (janl) Date: Sun, 23 Apr 2006 15:29:52 -0000 Subject: [Bug 40942] Default settings runs CPU at full speed always References: <20060423152952.4110.99593.malonedeb@gangotri.ubuntu.com> Message-ID: <20060423152952.4110.99593.malonedeb@gangotri.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 linux-image-2.6.15-20-686 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: Hi, kubuntu, dapper. Idle machine, top shows 40-50% userspace, and ~10% system, idle-time around 30%. The top users of CPU is kded at 3%, firefox at 1%, and kwifimanager and others at lower. Not sure what all that CPU is used for. Had to reconfigure powernowd to get it to scale back the speed at all - never got down to 20% usage. Centrino laptop: Linux lookfar.langfeldt.net 2.6.15-20-686 #1 SMP PREEMPT Tue Apr 4 18:37:00 UTC 2006 i686 GNU/Linux -- Default settings runs CPU at full speed always https://launchpad.net/bugs/40942 From magicfab at gmail.com Sun Apr 23 15:47:21 2006 From: magicfab at gmail.com (=?utf-8?b?RmFiacOhbiBSb2Ryw61ndWV6?=) Date: Sun, 23 Apr 2006 15:47:21 -0000 Subject: [Bug 39391] Re: network causes complete lock up References: <20060413031912.15408.22210.malonedeb@gangotri.ubuntu.com> Message-ID: <20060423154722.17643.90232.launchpad@gandwana.ubuntu.com> *** This bug is a duplicate of bug 34958 *** ** This bug has been marked a duplicate of bug 34958 IRQ 11 disabled, no network, desktop / kernel freeze (Averatec laptop) - regression from Breezy -- network causes complete lock up https://launchpad.net/bugs/39391 From magicfab at gmail.com Sun Apr 23 15:48:25 2006 From: magicfab at gmail.com (=?utf-8?b?RmFiacOhbiBSb2Ryw61ndWV6?=) Date: Sun, 23 Apr 2006 15:48:25 -0000 Subject: [Bug 35292] Duplicate of 34958 ? References: <20060317090412.6510.42733.malonedeb@gangotri.ubuntu.com> Message-ID: <20060423154825.4110.75590.malone@gangotri.ubuntu.com> *** This bug is a duplicate of bug 34958 *** I think this is a duplicate or closely related to #34958 ** This bug has been marked a duplicate of bug 34958 IRQ 11 disabled, no network, desktop / kernel freeze (Averatec laptop) - regression from Breezy -- network manager freezes !! https://launchpad.net/bugs/35292 From xavier.verne at free.fr Sun Apr 23 15:45:04 2006 From: xavier.verne at free.fr (Xavier Verne) Date: Sun, 23 Apr 2006 15:45:04 -0000 Subject: [Bug 35215] Re: ipw3945 driver required for functionality on new Intel PRO/Wireless 3945ABG Mini-PCI Express Adapters References: <20060316173707.11105.89035.malonedeb@gandwana.ubuntu.com> Message-ID: <20060423154504.4079.64925.malone@gangotri.ubuntu.com> I confirm ndiswrapper doesn't seem to work with this card under ubuntu (cannot load driver for the card). So we're still wired ! Jason question is interesting : which kernel version are you talking about for support ? -- ipw3945 driver required for functionality on new Intel PRO/Wireless 3945ABG Mini-PCI Express Adapters https://launchpad.net/bugs/35215 From magicfab at gmail.com Sun Apr 23 15:47:21 2006 From: magicfab at gmail.com (=?utf-8?b?RmFiacOhbiBSb2Ryw61ndWV6?=) Date: Sun, 23 Apr 2006 15:47:21 -0000 Subject: [Bug 34958] Re: IRQ 11 disabled, no network, desktop / kernel freeze (Averatec laptop) - regression from Breezy References: <20060314220405.17018.47701.malonedeb@gangotri.ubuntu.com> Message-ID: <20060423154722.17643.38251.launchpad@gandwana.ubuntu.com> ** Bug 39391 has been marked a duplicate of this bug ** Bug 35292 has been marked a duplicate of this bug -- IRQ 11 disabled, no network, desktop / kernel freeze (Averatec laptop) - regression from Breezy https://launchpad.net/bugs/34958 From gtaylor at clemson.edu Sun Apr 23 16:02:31 2006 From: gtaylor at clemson.edu (Greg Taylor) Date: Sun, 23 Apr 2006 16:02:31 -0000 Subject: [Bug 39862] Re: [Flight 6] Marvell ethernet interface doesn' t work after reboot References: <20060417131032.16492.98385.malonedeb@gandwana.ubuntu.com> Message-ID: <20060423160231.4110.33524.malone@gangotri.ubuntu.com> Just noticed this in my dmesg output: sky2 0000:02:00.0: No interrupt was generated using MSI, switching t o INTx mode. Please report this failure to the PCI maintainer and include system chipset information. -- [Flight 6] Marvell ethernet interface doesn' t work after reboot https://launchpad.net/bugs/39862 From samtygier at yahoo.co.uk Sun Apr 23 16:09:15 2006 From: samtygier at yahoo.co.uk (sam tygier) Date: Sun, 23 Apr 2006 16:09:15 -0000 Subject: [Bug 40942] Re: Default settings runs CPU at full speed always References: <20060423152952.4110.99593.malonedeb@gangotri.ubuntu.com> Message-ID: <20060423160915.17670.91558.malone@gandwana.ubuntu.com> is the the same as Bug #28433 -- Default settings runs CPU at full speed always https://launchpad.net/bugs/40942 From gtaylor at clemson.edu Sun Apr 23 16:08:10 2006 From: gtaylor at clemson.edu (Greg Taylor) Date: Sun, 23 Apr 2006 16:08:10 -0000 Subject: [Bug 27778] Re: ipw2200 Firmware Error on Install References: <20060113151913.29386.20905.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060423160810.4079.31993.malone@gangotri.ubuntu.com> I don't have the restricted modules package installed currently as I can't maintain connectivity long enough to do so. But lsmod shows the presence of ipw2200, do I actually need the restricted modules package if it's showing the module there just fine? Here's the errors: ipw2200: Failed to send ASSOCIATE: Command time out. ipw2200: Failed to send CARD_DISABLE: Command timed out. ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.1.1 PCI: Found IRQ 11 for device 0000:06:04.0 PCI: Sharing IRQ 11 with 0000:00:1d.3 PCI: Sharing IRQ 11 with 0000:01:00.0 PCI: Sharing IRQ 11 with 0000:02:00.0 ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection ipw2200: Failed to send TX_POWER: Command timed out. ipw2200: Failed to send TX_POWER: Command timed out. ipw2200: Failed to send TX_POWER: Command timed out. ipw2200: Failed to send TX_POWER: Command timed out. ipw2200: Failed to send TX_POWER: Command timed out. ipw2200: Unable to initialize device after 5 attempts. ipw2200: failed to register network device ipw2200: probe of 0000:06:04.0 failed with error -5 -- ipw2200 Firmware Error on Install https://launchpad.net/bugs/27778 From gtaylor at clemson.edu Sun Apr 23 16:12:34 2006 From: gtaylor at clemson.edu (Greg Taylor) Date: Sun, 23 Apr 2006 16:12:34 -0000 Subject: [Bug 40844] Re: Wireless killswitch Error References: <20060422220733.17670.41147.malonedeb@gandwana.ubuntu.com> Message-ID: <20060423161234.4110.19568.malone@gangotri.ubuntu.com> I'm absolutely positive. There is a little yellow LED beside the killswitch that lights up when the switch is on. I've tried this multiple times and can reproduce it just fine each time. Just noticed this in dmesg output appearing at the end when the killswitch is off right after the aforementioned 'killswitch must be turned off' error: ipw2200: Detected geography ZZM (11 802.11bg channels, 0 802.11a channels) eth1: NETDEV_TX_BUSY returned; driver should report queue full via ieee_device->is_queue_full. -- Wireless killswitch Error https://launchpad.net/bugs/40844 From gtaylor at clemson.edu Sun Apr 23 16:14:35 2006 From: gtaylor at clemson.edu (Greg Taylor) Date: Sun, 23 Apr 2006 16:14:35 -0000 Subject: [Bug 40844] Re: Wireless killswitch Error References: <20060422220733.17670.41147.malonedeb@gandwana.ubuntu.com> Message-ID: <20060423161435.17670.66379.malone@gandwana.ubuntu.com> As an added clarification, when I say 'killswitch on' i mean turning the switch on to enable wireless. Sorry for the erratic spacing/spelling, I'm on a machine with a failing keyboard. -- Wireless killswitch Error https://launchpad.net/bugs/40844 From robitaille at gmail.com Sun Apr 23 16:25:17 2006 From: robitaille at gmail.com (Daniel Robitaille) Date: Sun, 23 Apr 2006 16:25:17 -0000 Subject: [Bug 38333] Re: Hibernation stopped working with Flight 6 on Dell Latitude 110l References: <20060406065824.24486.88971.malonedeb@gangotri.ubuntu.com> Message-ID: <20060423162517.17643.55992.malone@gandwana.ubuntu.com> Following this recipe from Matthew Garrett seems to have solved it: >> echo RESUME=/dev/whatever | sudo tee /etc/mkinitramfs/conf.d/resume >> >> replacing /dev/whatever with the name of >> your swap partition. You'll >> then need to do >> >> sudo update-initramfs >> It turned out that I started using espresso install for both Flight 6 and Beta, so that's when my hibernate stopped working. -- Hibernation stopped working with Flight 6 on Dell Latitude 110l https://launchpad.net/bugs/38333 From mjg59 at codon.org.uk Sun Apr 23 16:37:00 2006 From: mjg59 at codon.org.uk (Matthew Garrett) Date: Sun, 23 Apr 2006 16:37:00 -0000 Subject: [Bug 27778] Re: [Bug 27778] Re: ipw2200 Firmware Error on Install References: <20060113151913.29386.20905.launchpad@macquarie.warthogs.hbd.com> <20060423160810.4079.31993.malone@gangotri.ubuntu.com> Message-ID: <20060423163700.GA15280@srcf.ucam.org> Hm. Without the restricted-modules package, I'm somewhat amazed that you have any firmware at all. But anyway, if you're getting those errors, the problem is elsewhere. Does this problem happen everywhere? ipw2200 seems "sensitive" to some network conditions. -- ipw2200 Firmware Error on Install https://launchpad.net/bugs/27778 From rsidd at online.fr Sun Apr 23 17:38:34 2006 From: rsidd at online.fr (rsidd) Date: Sun, 23 Apr 2006 17:38:34 -0000 Subject: [Bug 30547] Not fixed References: <20060205112038.11612.25982.malonedeb@gandwana.ubuntu.com> Message-ID: <20060423173834.4110.41688.malone@gangotri.ubuntu.com> The problem is still there in today's dapper (April 23), the pci=assign- busses line is still needed. -- cardbus bridge problem? cards not recognised https://launchpad.net/bugs/30547 From gtaylor at clemson.edu Sun Apr 23 17:41:04 2006 From: gtaylor at clemson.edu (Greg Taylor) Date: Sun, 23 Apr 2006 17:41:04 -0000 Subject: [Bug 27778] Re: ipw2200 Firmware Error on Install References: <20060113151913.29386.20905.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060423174104.17643.20212.malone@gandwana.ubuntu.com> I'm afraid it does happen everywhere that I've been so far. But as mentioned, everything is fine during the install, it pulls packages from the net without a hitch. I actually had to use my wireless connection to complete a install from a corrupt Dapper nightly CD a week ago. As far as specifics on my primary wireless network: non-broadcasted ESSID WEP encryption, open/managed I've been all over campus (hundreds of access points) and returned home to give this a try with the same results. Regardless of whether it can pull a signal, those errors look to be something lower level than signal/IP acquisition. -- ipw2200 Firmware Error on Install https://launchpad.net/bugs/27778 From spotter at cs.columbia.edu Sun Apr 23 17:48:16 2006 From: spotter at cs.columbia.edu (Shaya Potter) Date: Sun, 23 Apr 2006 17:48:16 -0000 Subject: [Bug 39940] Re: repeatable panic when switching to console at X startup References: <20060418010356.16492.97883.malonedeb@gandwana.ubuntu.com> Message-ID: <20060423174816.17643.93763.malone@gandwana.ubuntu.com> it seems like it might fglrx related (irq wrapper) this is the backtrace that I got process that panic the kernel was gconfd-2 EIP was _spin_lock_irqsave at 0x1d/0x80 backtrace was __wake_up at 0x1d/0x60 snd_intel8x0_interrupt at 0x274/0x2a0 (snd_intel8x0) ke_irq_handler_wrap at 0x20/x30 (fglrx) handle_IRQ_event at 0x3d/0x70 __do_IRQ at 0x9d/0x110 do_IRQ at 0x19/0x30 common_interrupt at 0x1a/0x20 -- repeatable panic when switching to console at X startup https://launchpad.net/bugs/39940 From rkimber at ntlworld.com Sun Apr 23 17:53:05 2006 From: rkimber at ntlworld.com (Rkimber) Date: Sun, 23 Apr 2006 17:53:05 -0000 Subject: [Bug 27190] Re: general protection fault References: <20060113145321.21012.84801.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060423175305.17643.85594.launchpad@gandwana.ubuntu.com> ** Attachment added: "Further example" http://librarian.launchpad.net/2296008/1292 -- general protection fault https://launchpad.net/bugs/27190 From safe at joek.net Sun Apr 23 17:52:35 2006 From: safe at joek.net (Joe Kilner) Date: Sun, 23 Apr 2006 17:52:35 -0000 Subject: [Bug 37430] Re: Crash during breezy->dapper upgrade References: <20060331041215.23707.99296.malonedeb@gandwana.ubuntu.com> Message-ID: <20060423175235.17643.83290.malone@gandwana.ubuntu.com> I have had two similar occurences. First was on a Dell desktop machine (can get the exact spec, but it was a dual Xeon job). I was installing using the gksudo "update-manager -d" command as mentioned in the ubuntu upgrade notice (after doing a full upgrade in aptitude to make sure everything was up to date). The machine (as well as the second one I will get to in a minute) was a Kubuntu CD install on to which I then installed the full Ubuntu package. All was going well untill I hit the modprobe hang that the other user has mentioned above. I also killed the pcmcia-cs process and the installation proceeded fine. There was another hang later on another configure step, but I Ctrl-C 'd that and things carried on smoothley. An initial boot tried to use the old 686 SMP kernel on the machine and seg-faulted everywhere (something I assume will go away when there is an up to date 686 SMP kernel), so I rebooted in to the standard 686 kernel. This booted fine (and very quickly :) ) but I could then not run adept (package library was locked). I fell back to aptitude to see if that would work and it told me to runk 'dpkg --configure -a' which I did. This unlocked the system but ended up with some failed packages caused by kcontrol not configuring properly. Eventually (and for no apparent reason) after a few attempts to re-install kcontrol it suddenly configured itself properly and everything now works fine! Buoyed by this success I decided to try the same process at home (Dual Athlon MP 1600's with 1Gb Ram on an Asus A7M266-D). The installation fell over at the PCMCIA stage as it had on my work PC, but unlike on the Dell I could not start a terminal or anything to kill the runaway process. As a result I had to shut down the PC mid-upgrade and now it hangs every time it tries to boot with the "Starting PCMCIA message" (this is the second PCMCIA message - there is already a "Start PCMCIA [failed]" entry in the boot text). Anyway, the result is currently a dead system (unless my search for booting with PCMCIA dissabled proves fruitful). So that's my experience, hope there is a clue to what's going on in there somewhere (I know how hard debugging this kind of thing can be). My guess whould be some concurrency issue in the modprobe and the rest of these issues are just resulting symptoms, but I know how annoying having "customers" trying to guess the causes of their bugs can be, so I'll keep quiet ;) -- Crash during breezy->dapper upgrade https://launchpad.net/bugs/37430 From sergiollanos at hotmail.com Sun Apr 23 17:56:00 2006 From: sergiollanos at hotmail.com (tioantonio) Date: Sun, 23 Apr 2006 17:56:00 -0000 Subject: [Bug 36462] Re: optical mouse problem References: <20060324175400.6279.66012.malonedeb@gandwana.ubuntu.com> Message-ID: <20060423175601.4079.32647.malone@gangotri.ubuntu.com> i try with the new beta version and.... dont works. -- optical mouse problem https://launchpad.net/bugs/36462 From jukka.holm at gmail.com Sun Apr 23 18:08:17 2006 From: jukka.holm at gmail.com (jukka holm) Date: Sun, 23 Apr 2006 18:08:17 -0000 Subject: [Bug 35134] Re: Resume (from RAM) fails References: <20060315230705.11105.24738.malonedeb@gandwana.ubuntu.com> Message-ID: <20060423180817.17670.27548.malone@gandwana.ubuntu.com> I have the same problem. Hard disk doesnt come back alive from suspend to ram. Hard disk led stays on and I cant read or write from the disk. I have Thinkpad X41 with Dapper and latest updates from 23th of april. -- Resume (from RAM) fails https://launchpad.net/bugs/35134 From burner at suppressingfire.org Sun Apr 23 18:35:49 2006 From: burner at suppressingfire.org (Michael R. Head) Date: Sun, 23 Apr 2006 18:35:49 -0000 Subject: [Bug 35215] Re: ipw3945 driver required for functionality on new Intel PRO/Wireless 3945ABG Mini-PCI Express Adapters References: <20060316173707.11105.89035.malonedeb@gandwana.ubuntu.com> Message-ID: <20060423183549.17670.61924.malone@gandwana.ubuntu.com> I think this is now FIX RELEASED in linux-image-2.6.15-21: linux-source-2.6.15 (2.6.15-21.31) dapper; urgency=low Changes by Ben Collins ... * ieee80211_1_1_13: Slightly munged ieee80211 1.1.13 stack for use with ipw3945. * ipw3945: New driver. ... -- ipw3945 driver required for functionality on new Intel PRO/Wireless 3945ABG Mini-PCI Express Adapters https://launchpad.net/bugs/35215 From zulcss at gmail.com Sun Apr 23 19:09:17 2006 From: zulcss at gmail.com (ChuckShort) Date: Sun, 23 Apr 2006 19:09:17 -0000 Subject: [Bug 31936] Re: using touchpad with cPad driver causes a kernel panic References: <20060219010109.795.28471.malonedeb@gandwana.ubuntu.com> Message-ID: <20060423190917.17643.41423.malone@gandwana.ubuntu.com> Closing as perl bug reporter ** Changed in: linux-source-2.6.15 linux-image-2.6.15-15-686 (Ubuntu) Status: Fix Committed => Fix Released -- using touchpad with cPad driver causes a kernel panic https://launchpad.net/bugs/31936 From greblus at wp.pl Sun Apr 23 19:31:54 2006 From: greblus at wp.pl (Wiktor Grebla) Date: Sun, 23 Apr 2006 19:31:54 -0000 Subject: [Bug 38884] Re: rtl818x - System hangs when uploading files. References: <20060409144601.32233.18688.malonedeb@gandwana.ubuntu.com> Message-ID: <20060423193154.4110.56964.malone@gangotri.ubuntu.com> It seems that the problem is gone on 2.6.15-21-k7. -- rtl818x - System hangs when uploading files. https://launchpad.net/bugs/38884 From wade at ezri.org Sun Apr 23 19:55:11 2006 From: wade at ezri.org (Wade Menard) Date: Sun, 23 Apr 2006 19:55:11 -0000 Subject: [Bug 38253] Re: RFE: ipw3495 Support References: <20060405190932.24516.9409.malonedeb@gangotri.ubuntu.com> Message-ID: <20060423195511.4079.93486.launchpad@gangotri.ubuntu.com> *** This bug is a duplicate of bug 35215 *** ** This bug has been marked a duplicate of bug 35215 ipw3945 driver required for functionality on new Intel PRO/Wireless 3945ABG Mini-PCI Express Adapters -- RFE: ipw3495 Support https://launchpad.net/bugs/38253 From wade at ezri.org Sun Apr 23 19:55:11 2006 From: wade at ezri.org (Wade Menard) Date: Sun, 23 Apr 2006 19:55:11 -0000 Subject: [Bug 35215] Re: ipw3945 driver required for functionality on new Intel PRO/Wireless 3945ABG Mini-PCI Express Adapters References: <20060316173707.11105.89035.malonedeb@gandwana.ubuntu.com> Message-ID: <20060423195511.4079.95612.launchpad@gangotri.ubuntu.com> ** Bug 38253 has been marked a duplicate of this bug -- ipw3945 driver required for functionality on new Intel PRO/Wireless 3945ABG Mini-PCI Express Adapters https://launchpad.net/bugs/35215 From wade at ezri.org Sun Apr 23 20:03:03 2006 From: wade at ezri.org (Wade Menard) Date: Sun, 23 Apr 2006 20:03:03 -0000 Subject: [Bug 35215] Re: ipw3945 driver required for functionality on new Intel PRO/Wireless 3945ABG Mini-PCI Express Adapters References: <20060316173707.11105.89035.malonedeb@gandwana.ubuntu.com> Message-ID: <20060423200303.4079.46137.malone@gangotri.ubuntu.com> I am having trouble with this update (2.6.15-21.32-686). I am seeing the following in syslog on boot and when I try and run modprobe ipw3945. ieee80211_crypt: unregistered algorithm 'NULL' ieee80211_crypt: registered algorithm 'NULL' ieee80211: 802.11 data/management/control stack, git-1.1.7 ieee80211: Copyright (C) 2004-2005 Intel Corporation ipw3945: Unknown symbol ieee80211_1_1_13_set_geo ipw3945: Unknown symbol ieee80211_1_1_13_get_channel_flags ipw3945: Unknown symbol ieee80211_1_1_13_wx_get_encode ipw3945: Unknown symbol ieee80211_1_1_13_wx_get_scan ipw3945: Unknown symbol ieee80211_1_1_13_wx_set_encode ipw3945: Unknown symbol ieee80211_1_1_13_wx_get_encodeext ipw3945: Unknown symbol ieee80211_1_1_13_tx_frame ipw3945: Unknown symbol ieee80211_1_1_13_channel_to_index ipw3945: Unknown symbol ieee80211_1_1_13_rx_mgt ipw3945: Unknown symbol ieee80211_1_1_13_wx_set_encodeext ipw3945: Unknown symbol ieee80211_1_1_13_rx ipw3945: Unknown symbol ieee80211_1_1_13_freq_to_channel ipw3945: Unknown symbol alloc_ieee80211_1_1_13 ipw3945: Unknown symbol ieee80211_1_1_13_get_channel ipw3945: Unknown symbol ieee80211_1_1_13_txb_free ipw3945: Unknown symbol ieee80211_1_1_13_get_geo ipw3945: Unknown symbol ieee80211_1_1_13_is_valid_channel ipw3945: Unknown symbol free_ieee80211_1_1_13 -- ipw3945 driver required for functionality on new Intel PRO/Wireless 3945ABG Mini-PCI Express Adapters https://launchpad.net/bugs/35215 From launchpad.net.tormod at xoxy.net Sun Apr 23 20:05:35 2006 From: launchpad.net.tormod at xoxy.net (Tormod Volden) Date: Sun, 23 Apr 2006 20:05:35 -0000 Subject: [Bug 40883] Re: Touching keyboard keys doesn't cause laptop to resume References: <20060423074031.17643.93780.malonedeb@gandwana.ubuntu.com> Message-ID: <20060423200535.4110.40992.malone@gangotri.ubuntu.com> I have seen this on a HP Compaq nx6110. I had to press the power button to make it resume. I don't know how it would be under Windows. ** Changed in: acpi (Ubuntu) Status: Unconfirmed => Confirmed -- Touching keyboard keys doesn't cause laptop to resume https://launchpad.net/bugs/40883 From ubuntu-bugzilla at fdnet.biz Sun Apr 23 20:44:42 2006 From: ubuntu-bugzilla at fdnet.biz (Francis) Date: Sun, 23 Apr 2006 20:44:42 -0000 Subject: [Bug 40850] Re: Mounting my USB drive take long References: <20060422230440.17643.26503.malonedeb@gandwana.ubuntu.com> Message-ID: <20060423204442.17670.9265.malone@gandwana.ubuntu.com> hum.. doesn't bug anymore.. strange -- Mounting my USB drive take long https://launchpad.net/bugs/40850 From john.dong at gmail.com Sun Apr 23 21:10:04 2006 From: john.dong at gmail.com (John Dong) Date: Sun, 23 Apr 2006 21:10:04 -0000 Subject: [Bug 37370] Re: Crash/freeze when restarting networking, rt2570 wireless USB (DWL-G122, rev B1) References: <20060330180253.23733.49082.malonedeb@gandwana.ubuntu.com> Message-ID: <20060423211004.17643.99204.malone@gandwana.ubuntu.com> This is a known issue of the upstream rt2570 drivers when PREEMPT is on. (Does not happen when PREEMPT is off, or voluntary preempt is on) They know about the issue; their forums has reports of this; no fix currently... They are rewriting the entire driver to be generalized, so let's hope the new drivers fix it? A workaround may be to use a server kernel, which AFAIK has preempt turned off. Or just unplug the interface and re-plug instead of bouncing the interface. -- Crash/freeze when restarting networking, rt2570 wireless USB (DWL-G122, rev B1) https://launchpad.net/bugs/37370 From gpothier at gmail.com Sun Apr 23 21:36:00 2006 From: gpothier at gmail.com (gpothier) Date: Sun, 23 Apr 2006 21:36:00 -0000 Subject: [Bug 40929] Re: ACPI S3 broken on Dell Latitude D810, worked in Breezy References: <20060423134659.17670.59364.malonedeb@gandwana.ubuntu.com> Message-ID: <20060423213600.17670.70681.malone@gandwana.ubuntu.com> Great news, suspend/resume is much more stable with the newly uploaded kernel (2.6.15-21-686). Up to now I only experienced one failure out of a dozen attempts, once I commented out DISABLE_DMA=true and RESET_DRIVE=true. In the failed attempt the symptoms were a bit different than those described in the original description: X showed up, apps were responsive, but HDD accesses throwed errors instead of freezing. However, I loose the mouse wheel on resume. I have to unplug/replug the usb connector to get it back. Thanks for the good work!! -- ACPI S3 broken on Dell Latitude D810, worked in Breezy https://launchpad.net/bugs/40929 From wade at ezri.org Sun Apr 23 22:17:07 2006 From: wade at ezri.org (Wade Menard) Date: Sun, 23 Apr 2006 22:17:07 -0000 Subject: [Bug 40988] Re: ipw3945: Unknown symbols ieee80211_1_1_13_XXX_YYY References: <20060423213121.4079.16508.malonedeb@gangotri.ubuntu.com> Message-ID: <20060423221707.4110.5602.launchpad@gangotri.ubuntu.com> *** This bug is a duplicate of bug 35215 *** ** This bug has been marked a duplicate of bug 35215 ipw3945 driver required for functionality on new Intel PRO/Wireless 3945ABG Mini-PCI Express Adapters -- ipw3945: Unknown symbols ieee80211_1_1_13_XXX_YYY https://launchpad.net/bugs/40988 From wade at ezri.org Sun Apr 23 22:17:07 2006 From: wade at ezri.org (Wade Menard) Date: Sun, 23 Apr 2006 22:17:07 -0000 Subject: [Bug 35215] Re: ipw3945 driver required for functionality on new Intel PRO/Wireless 3945ABG Mini-PCI Express Adapters References: <20060316173707.11105.89035.malonedeb@gandwana.ubuntu.com> Message-ID: <20060423221707.4110.1902.launchpad@gangotri.ubuntu.com> ** Bug 40988 has been marked a duplicate of this bug -- ipw3945 driver required for functionality on new Intel PRO/Wireless 3945ABG Mini-PCI Express Adapters https://launchpad.net/bugs/35215 From ryan.sammartino at gmail.com Sun Apr 23 22:42:03 2006 From: ryan.sammartino at gmail.com (Ryan T. Sammartino) Date: Sun, 23 Apr 2006 22:42:03 -0000 Subject: [Bug 40994] DapperDrake Beta (April 20 release) install: DapperDrake fails to detect DECchip 21140 ethernet card References: <20060423222059.17643.87697.malonedeb@gandwana.ubuntu.com> Message-ID: <20060423224203.17643.25369.launchpad@canonical@gandwana.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: (Per comments from Dennis Kaarsemaker on bug #40972, I am opening one bug per item not detected). Installing DapperDrake Beta (April 20 release) on my desktop system, which is on the old-ish side, DapperDrake fails to detect my ethernet card (Digital Equipment Corporation DECchip 21140, which is driven by the tulip driver in Mandriva). When I do 'lspci' or 'sudo lspci', there is no output. Here is what dmesg says: [4294667.296000] Linux version 2.6.15-20-386 (buildd at vernadsky) (gcc version 4.0.3 (Ubuntu 4.0.3-1ubuntu3)) #1 PREEMPT Tue Apr 4 17:48:51 UTC 2006 [4294667.296000] BIOS-provided physical RAM map: [4294667.296000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [4294667.296000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [4294667.296000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [4294667.296000] BIOS-e820: 0000000000100000 - 000000003fff0000 (usable) [4294667.296000] BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS) [4294667.296000] BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data) [4294667.296000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [4294667.296000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [4294667.296000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) [4294667.296000] 127MB HIGHMEM available. [4294667.296000] 896MB LOWMEM available. [4294667.296000] found SMP MP-table at 000f5770 [4294667.296000] On node 0 totalpages: 262128 [4294667.296000] DMA zone: 4096 pages, LIFO batch:0 [4294667.296000] DMA32 zone: 0 pages, LIFO batch:0 [4294667.296000] Normal zone: 225280 pages, LIFO batch:31 [4294667.296000] HighMem zone: 32752 pages, LIFO batch:7 [4294667.296000] DMI 2.3 present. [4294667.296000] ACPI: RSDP (v000 VIA694 ) @ 0x000f70b0 [4294667.296000] ACPI: RSDT (v001 VIA694 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff3000 [4294667.296000] ACPI: FADT (v001 VIA694 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff3040 [4294667.296000] ACPI: MADT (v001 VIA694 0x00000000 0x00000000) @ 0x3fff56c0 [4294667.296000] ACPI: DSDT (v001 VIA694 AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x00000000 [4294667.296000] ACPI: PM-Timer IO Port: 0x4008 [4294667.296000] ACPI: Local APIC address 0xfee00000 [4294667.296000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [4294667.296000] Processor #0 6:8 APIC version 17 [4294667.296000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [4294667.296000] Processor #1 6:8 APIC version 17 [4294667.296000] WARNING: NR_CPUS limit of 1 reached. Processor ignored. [4294667.296000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [4294667.296000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 [4294667.296000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [4294667.296000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 dfl dfl) [4294667.296000] ACPI: IRQ0 used by override. [4294667.296000] ACPI: IRQ2 used by override. [4294667.296000] ACPI: IRQ9 used by override. [4294667.296000] Enabling APIC mode: Flat. Using 1 I/O APICs [4294667.296000] Using ACPI (MADT) for SMP configuration information [4294667.296000] Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000) [4294667.296000] Built 1 zonelists [4294667.296000] Kernel command line: root=/dev/hda1 ro quiet splash [4294667.296000] mapped APIC to ffffd000 (fee00000) [4294667.296000] mapped IOAPIC to ffffc000 (fec00000) [4294667.296000] Initializing CPU#0 [4294667.296000] PID hash table entries: 4096 (order: 12, 65536 bytes) [4294667.296000] Detected 998.629 MHz processor. [4294667.296000] Using pmtmr for high-res timesource [4294667.296000] Console: colour VGA+ 80x25 [4294667.449000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [4294667.453000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [4294667.559000] Memory: 1028684k/1048512k available (1973k kernel code, 19108k reserved, 601k data, 288k init, 131008k highmem) [4294667.559000] Checking if this processor honours the WP bit even in supervisor mode... Ok. [4294667.619000] Calibrating delay using timer specific routine.. 1998.09 BogoMIPS (lpj=999046) [4294667.619000] Security Framework v1.0.0 initialized [4294667.619000] SELinux: Disabled at boot. [4294667.619000] Mount-cache hash table entries: 512 [4294667.619000] CPU: After generic identify, caps: 0387fbff 00000000 00000000 00000000 00000000 00000000 00000000 [4294667.619000] CPU: After vendor identify, caps: 0387fbff 00000000 00000000 00000000 00000000 00000000 00000000 [4294667.619000] CPU: L1 I cache: 16K, L1 D cache: 16K [4294667.619000] CPU: L2 cache: 256K [4294667.619000] CPU serial number disabled. [4294667.619000] CPU: After all inits, caps: 0383fbff 00000000 00000000 00000040 00000000 00000000 00000000 [4294667.619000] mtrr: v2.0 (20020519) [4294667.619000] CPU: Intel Pentium III (Coppermine) stepping 0a [4294667.619000] Enabling fast FPU save and restore... done. [4294667.619000] Enabling unmasked SIMD FPU exception support... done. [4294667.619000] Checking 'hlt' instruction... OK. [4294667.623000] checking if image is initramfs... it is [4294669.193000] Freeing initrd memory: 6787k freed [4294669.218000] ACPI: Looking for DSDT ... not found! [4294669.287000] ENABLING IO-APIC IRQs [4294669.287000] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [4294669.398000] NET: Registered protocol family 16 [4294669.398000] EISA bus registered [4294669.398000] ACPI: bus type pci registered [4294669.414000] PCI: PCI BIOS revision 2.10 entry at 0xfb3a0, last bus=2 [4294669.414000] PCI: Using configuration type 1 [4294669.415000] ACPI: Subsystem revision 20051216 [4294669.426000] ACPI: Interpreter enabled [4294669.426000] ACPI: Using IOAPIC for interrupt routing [4294669.427000] ACPI: PCI Root Bridge [PCI0] (0000:00) [4294669.427000] PCI: Probing PCI hardware (bus 00) [4294669.427000] ACPI: Assume root bridge [\_SB_.PCI0] bus is 0 [4294669.431000] PCI quirk: region 6000-607f claimed by vt82c686 HW-mon [4294669.431000] PCI quirk: region 5000-500f claimed by vt82c686 SMB [4294669.431000] Boot video device is 0000:01:00.0 [4294669.432000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [4294669.433000] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 11 12 14 15) [4294669.434000] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *10 11 12 14 15) [4294669.434000] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 *11 12 14 15) [4294669.435000] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 *3 4 5 6 7 10 11 12 14 15) [4294669.439000] Linux Plug and Play Support v0.97 (c) Adam Belay [4294669.439000] pnp: PnP ACPI init [4294669.445000] pnp: PnP ACPI: found 11 devices [4294669.445000] PnPBIOS: Disabled by ACPI PNP [4294669.445000] PCI: Using ACPI for IRQ routing [4294669.445000] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [4294669.446000] PCI: Bridge: 0000:00:01.0 [4294669.446000] IO window: disabled. [4294669.446000] MEM window: e4000000-e6ffffff [4294669.446000] PREFETCH window: d0000000-dfffffff [4294669.446000] PCI: Bridge: 0000:00:0c.0 [4294669.446000] IO window: disabled. [4294669.446000] MEM window: e8000000-e80fffff [4294669.446000] PREFETCH window: disabled. [4294669.446000] PCI: Setting latency timer of device 0000:00:01.0 to 64 [4294669.447000] audit: initializing netlink socket (disabled) [4294669.447000] audit(1145820526.446:1): initialized [4294669.447000] highmem bounce pool size: 64 pages [4294669.447000] VFS: Disk quotas dquot_6.5.1 [4294669.447000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [4294669.447000] Initializing Cryptographic API [4294669.447000] io scheduler noop registered [4294669.448000] io scheduler anticipatory registered [4294669.448000] io scheduler deadline registered [4294669.448000] io scheduler cfq registered [4294669.448000] isapnp: Scanning for PnP cards... [4294669.805000] isapnp: No Plug & Play device found [4294669.836000] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [4294669.836000] serio: i8042 AUX port at 0x60,0x64 irq 12 [4294669.836000] serio: i8042 KBD port at 0x60,0x64 irq 1 [4294669.836000] Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled [4294669.836000] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [4294669.841000] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [4294669.842000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [4294669.842000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [4294669.842000] ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx [4294669.842000] ACPI: bus type ide registered [4294669.842000] mice: PS/2 mouse device common for all mice [4294669.843000] EISA: Probing bus 0 at eisa.0 [4294669.843000] Cannot allocate resource for EISA slot 1 [4294669.843000] Cannot allocate resource for EISA slot 4 [4294669.843000] Cannot allocate resource for EISA slot 5 [4294669.843000] Cannot allocate resource for EISA slot 6 [4294669.843000] EISA: Detected 0 cards. [4294669.843000] NET: Registered protocol family 2 [4294669.852000] IP route cache hash table entries: 65536 (order: 6, 262144 bytes) [4294669.852000] TCP established hash table entries: 262144 (order: 8, 1048576 bytes) [4294669.858000] TCP bind hash table entries: 65536 (order: 6, 262144 bytes) [4294669.859000] TCP: Hash tables configured (established 262144 bind 65536) [4294669.859000] TCP reno registered [4294669.859000] TCP bic registered [4294669.859000] NET: Registered protocol family 1 [4294669.860000] NET: Registered protocol family 8 [4294669.860000] NET: Registered protocol family 20 [4294669.860000] Using IPI Shortcut mode [4294669.860000] ACPI wakeup devices: [4294669.860000] PCI0 USB0 USB1 MODM UAR1 ECP1 [4294669.860000] ACPI: (supports S0 S1 S4 S5) [4294669.860000] Freeing unused kernel memory: 288k freed [4294669.866000] input: AT Translated Set 2 keyboard as /class/input/input0 [4294670.018000] vga16fb: initializing [4294670.018000] vga16fb: mapped to 0xc00a0000 [4294670.218000] Console: switching to colour frame buffer device 80x25 [4294670.218000] fb0: VGA16 VGA frame buffer device [4294671.248000] Capability LSM initialized [4294672.513000] Probing IDE interface ide0... [4294672.899000] hda: Maxtor 6B200P0, ATA DISK drive [4294673.511000] Probing IDE interface ide1... [4294674.305000] hdc: ATAPI DVD DD 2X16X4X16, ATAPI CD/DVD-ROM drive [4294674.917000] Probing IDE interface ide2... [4294675.430000] Probing IDE interface ide3... [4294675.943000] Probing IDE interface ide4... [4294676.456000] Probing IDE interface ide5... [4294676.969000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [4294676.969000] ide1 at 0x170-0x177,0x376 on irq 15 [4294676.984000] hda: max request size: 1024KiB [4294677.005000] hda: 398297088 sectors (203928 MB) w/8192KiB Cache, CHS=24792/255/63 [4294677.007000] hda: cache flushes supported [4294677.007000] hda: hda1 hda2 hda3 [4294677.047000] hdc: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache [4294677.047000] Uniform CD-ROM driver Revision: 3.20 [4294677.491000] EXT3-fs: mounted filesystem with ordered data mode. [4294677.491000] kjournald starting. Commit interval 5 seconds [4294711.820000] input: PC Speaker as /class/input/input1 [4294712.136000] logips2pp: Detected unknown logitech mouse model 11 [4294712.231000] input: PS/2 Logitech Mouse as /class/input/input2 [4294712.285000] ts: Compaq touchscreen protocol output [4294712.436000] parport: PnPBIOS parport detected. [4294712.436000] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA] [4294712.451000] Real Time Clock Driver v1.12 [4294712.464000] parport0: Printer, HEWLETT-PACKARD DESKJET 895C [4294712.566000] Floppy drive(s): fd0 is 1.44M [4294712.580000] FDC 0 is a post-1991 82077 [4294712.903000] Adding 2048276k swap on /dev/hda3. Priority:-1 extents:1 across:2048276k [4294712.992000] EXT3 FS on hda1, internal journal [4294713.297000] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 [4294713.297000] md: bitmap version 4.39 [4294714.061000] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel at redhat.com [4294714.617000] cdrom: open failed. [4294715.484000] kjournald starting. Commit interval 5 seconds [4294715.486000] EXT3 FS on hda2, internal journal [4294715.486000] EXT3-fs: mounted filesystem with ordered data mode. [4294717.575000] ACPI: Power Button (FF) [PWRF] [4294717.575000] ACPI: Power Button (CM) [PWRB] [4294717.806000] ibm_acpi: ec object not found [4294717.855000] pcc_acpi: loading... [4294728.380000] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac) [4294728.380000] apm: overridden by ACPI. [4294737.900000] hdc: drive_cmd: status=0x51 { DriveReady SeekComplete Error } [4294737.900000] hdc: drive_cmd: error=0x04 { AbortedCommand } [4294737.900000] ide: failed opcode was: 0xec [4294737.994000] hdc: drive_cmd: status=0x51 { DriveReady SeekComplete Error } [4294737.995000] hdc: drive_cmd: error=0x04 { AbortedCommand } [4294737.995000] ide: failed opcode was: 0xec [4294738.378000] Bluetooth: Core ver 2.8 [4294738.378000] NET: Registered protocol family 31 [4294738.378000] Bluetooth: HCI device and connection manager initialized [4294738.378000] Bluetooth: HCI socket layer initialized [4294738.440000] Bluetooth: L2CAP ver 2.8 [4294738.440000] Bluetooth: L2CAP socket layer initialized [4294738.491000] Bluetooth: RFCOMM socket layer initialized [4294738.491000] Bluetooth: RFCOMM TTY layer initialized [4294738.491000] Bluetooth: RFCOMM ver 1.7 [4294773.437000] NET: Registered protocol family 10 [4294773.437000] lo: Disabled Privacy Extensions [4294773.438000] IPv6 over IPv4 tunneling driver [4295627.959000] cdrom: This disc doesn't have any tracks I recognize! For comparison, here is what lspci and dmesg say when I boot up Mandriva: $ lspci 00:00.0 Host bridge: VIA Technologies, Inc. VT82C693A/694x [Apollo PRO133x] (rev c4) 00:01.0 PCI bridge: VIA Technologies, Inc. VT82C598/694x [Apollo MVP3/Pro133x AGP] 00:07.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super South] (rev 40) 00:07.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06) 00:07.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 16) 00:07.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 16) 00:07.4 Bridge: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] (rev 40) 00:0b.0 Ethernet controller: Digital Equipment Corporation DECchip 21140 [FasterNet] (rev 20) 00:0c.0 PCI bridge: Hint Corp HB6 Universal PCI-PCI bridge (non-transparent mode) (rev 15) 00:0d.0 Multimedia audio controller: Creative Labs SB Audigy LS 00:0e.0 Mass storage controller: Triones Technologies, Inc. HPT366/368/370/370A/372/372N (rev 03) 01:00.0 VGA compatible controller: nVidia Corporation GeForce 6200 (rev a1) 02:08.0 USB Controller: NEC Corporation USB (rev 41) 02:08.1 USB Controller: NEC Corporation USB (rev 41) 02:08.2 USB Controller: NEC Corporation USB 2.0 (rev 02) 02:0c.0 FireWire (IEEE 1394): Texas Instruments TSB43AB23 IEEE-1394a-2000 Controller (PHY/Link) $ dmesg Linux version 2.6.12-17mdksmp (qateam at mercury.mandriva.com) (gcc version 4.0.1 (4.0.1-5mdk for Mandriva Linux release 2006.0)) #1 SMP Mon Feb 13 12:10:24 MST 2006 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003fff0000 (usable) BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS) BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) user-defined physical RAM map: user: 0000000000000000 - 000000000009fc00 (usable) user: 000000000009fc00 - 00000000000a0000 (reserved) user: 00000000000f0000 - 0000000000100000 (reserved) user: 0000000000100000 - 000000003fff0000 (usable) user: 000000003fff0000 - 000000003fff3000 (ACPI NVS) user: 000000003fff3000 - 0000000040000000 (ACPI data) user: 00000000fec00000 - 00000000fec01000 (reserved) user: 00000000fee00000 - 00000000fee01000 (reserved) user: 00000000ffff0000 - 0000000100000000 (reserved) 127MB HIGHMEM available. 896MB LOWMEM available. found SMP MP-table at 000f5770 On node 0 totalpages: 262128 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 225280 pages, LIFO batch:31 HighMem zone: 32752 pages, LIFO batch:15 DMI 2.3 present. ACPI: RSDP (v000 VIA694 ) @ 0x000f70b0 ACPI: RSDT (v001 VIA694 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff3000 ACPI: FADT (v001 VIA694 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff3040 ACPI: MADT (v001 VIA694 0x00000000 0x00000000) @ 0x3fff56c0 ACPI: DSDT (v001 VIA694 AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x00000000 ACPI: PM-Timer IO Port: 0x4008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 6:8 APIC version 17 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) Processor #1 6:8 APIC version 17 Using ACPI for processor (LAPIC) configuration information Intel MultiProcessor Specification v1.1 Virtual Wire compatibility mode. OEM ID: OEM00000 Product ID: PROD00000000 APIC at: 0xFEE00000 I/O APIC #2 Version 17 at 0xFEC00000. Enabling APIC mode: Flat. Using 1 I/O APICs Processors: 2 Allocating PCI resources starting at 40000000 (gap: 40000000:bec00000) Built 1 zonelists mapped APIC to ffffd000 (fee00000) mapped IOAPIC to ffffc000 (fec00000) Initializing CPU#0 Kernel command line: auto BOOT_IMAGE=linux root=306 acpi=ht resume=/dev/hda5 mem=1024M splash=silent bootsplash: silent mode. PID hash table entries: 4096 (order: 12, 65536 bytes) Detected 998.795 MHz processor. Using pmtmr for high-res timesource Console: colour dummy device 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 1033224k/1048512k available (2451k kernel code, 14508k reserved, 788k data, 296k init, 131008k highmem, 0k BadRAM) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay loop... 1978.36 BogoMIPS (lpj=989184) Mount-cache hash table entries: 512 CPU: After generic identify, caps: 0387fbff 00000000 00000000 00000000 00000000 00000000 00000000 CPU: After vendor identify, caps: 0387fbff 00000000 00000000 00000000 00000000 00000000 00000000 CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 256K CPU serial number disabled. CPU: After all inits, caps: 0383fbff 00000000 00000000 00000040 00000000 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. CPU0: Intel Pentium III (Coppermine) stepping 0a Enabling SMP... Booting processor 1/1 eip 3000 Initializing CPU#1 Calibrating delay loop... 1994.75 BogoMIPS (lpj=997376) CPU: After generic identify, caps: 0387fbff 00000000 00000000 00000000 00000000 00000000 00000000 CPU: After vendor identify, caps: 0387fbff 00000000 00000000 00000000 00000000 00000000 00000000 CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 256K CPU serial number disabled. CPU: After all inits, caps: 0383fbff 00000000 00000000 00000040 00000000 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. CPU1: Intel Pentium III (Coppermine) stepping 0a Total of 2 processors activated (3973.12 BogoMIPS). ENABLING IO-APIC IRQs ..TIMER: vector=0x31 pin1=2 pin2=0 checking TSC synchronization across 2 CPUs: passed. Enabling SMP... Brought up 2 CPUs CPU0 attaching sched-domain: domain 0: span 00000001 groups: 00000001 domain 1: span 00000003 groups: 00000001 00000002 CPU1 attaching sched-domain: domain 0: span 00000002 groups: 00000002 domain 1: span 00000003 groups: 00000002 00000001 checking if image is initramfs...it isn't (bad gzip magic numbers); looks like an initrd Freeing initrd memory: 480k freed NET: Registered protocol family 16 PCI: PCI BIOS revision 2.10 entry at 0xfb3a0, last bus=2 PCI: Using configuration type 1 mtrr: v2.0 (20020519) mtrr: your CPUs had inconsistent variable MTRR settings mtrr: probably your BIOS does not setup all CPUs. mtrr: corrected configuration. ACPI: Subsystem revision 20050309 ACPI: Interpreter disabled. Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI: disabled PnPBIOS: Disabled PCI: Probing PCI hardware PCI: Probing PCI hardware (bus 00) Boot video device is 0000:01:00.0 PCI: Using IRQ router VIA [1106/0686] at 0000:00:07.0 apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac) apm: disabled - APM is not SMP safe. audit: initializing netlink socket (disabled) audit(1145807852.975:0): initialized highmem bounce pool size: 64 pages VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) devfs: 2004-01-31 Richard Gooch (rgooch at atnf.csiro.au) devfs: boot_options: 0x0 Initializing Cryptographic API PCI: Enabling Via external APIC routing vesafb: framebuffer at 0xd0000000, mapped to 0xf8880000, using 3750k, total 262144k vesafb: mode is 800x600x16, linelength=1600, pages=2 vesafb: protected mode interface info at c000:d2b0 vesafb: scrolling: redraw vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 27015 bytes,<6>...found (800x600, 26967 bytes, v3). Console: switching to colour frame buffer device 93x30 fb0: VESA VGA frame buffer device isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Real Time Clock Driver v1.12 PNP: No PS/2 controller found. Probing ports directly. serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered RAMDISK driver initialized: 16 RAM disks of 32000K size 1024 blocksize pktcdvd: v0.2.0a 2004-07-14 Jens Axboe (axboe at suse.de) and petero2 at telia.com Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: IDE controller at PCI slot 0000:00:07.1 PCI: Via IRQ fixup for 0000:00:07.1, from 255 to 0 VP_IDE: chipset revision 6 VP_IDE: not 100% native mode: will probe irqs later VP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on pci0000:00:07.1 ide0: BM-DMA at 0xc000-0xc007, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xc008-0xc00f, BIOS settings: hdc:DMA, hdd:pio Probing IDE interface ide0... hda: Maxtor 6B200P0, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hdc: ATAPI DVD DD 2X16X4X16, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 HPT370: IDE controller at PCI slot 0000:00:0e.0 HPT370: chipset revision 3 HPT37X: using 33MHz PCI clock HPT370: 100% native mode on irq 11 ide2: BM-DMA at 0xe400-0xe407, BIOS settings: hde:pio, hdf:pio ide3: BM-DMA at 0xe408-0xe40f, BIOS settings: hdg:pio, hdh:pio Probing IDE interface ide2... Probing IDE interface ide3... hda: max request size: 1024KiB hda: 398297088 sectors (203928 MB) w/8192KiB Cache, CHS=24792/255/63, UDMA(33) hda: cache flushes supported /dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 p6 p7 p8 p9 > mice: PS/2 mouse device common for all mice md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27 NET: Registered protocol family 2 IP: routing cache hash table of 8192 buckets, 64Kbytes TCP established hash table entries: 262144 (order: 9, 2097152 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 262144 bind 65536) NET: Registered protocol family 1 Starting balanced_irq BIOS EDD facility v0.16 2004-Jun-25, 1 devices found devfs_mk_dev: could not append to parent for md/0 md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. RAMDISK: cramfs filesystem found at block 0 RAMDISK: Loading 428KiB [1 disk] into ram disk... done. VFS: Mounted root (cramfs filesystem) readonly. input: AT Translated Set 2 keyboard on isa0060/serio0 ieee1394: Initialized config rom entry `ip1394' ohci1394: $Rev: 1250 $ Ben Collins ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[3] MMIO=[e8006000-e80067ff] Max Packet=[2048] SCSI subsystem initialized sbp2: $Rev: 1219 $ Ben Collins logips2pp: Detected unknown logitech mouse model 11 input: PS/2 Logitech Mouse on isa0060/serio1 ieee1394: Host added: ID:BUS[0-00:1023] GUID[005042b5c00d1769] ieee1394: Node added: ID:BUS[0-01:1023] GUID[0010b9f701038335] ieee1394: The root node is not cycle master capable; selecting a new root node and resetting... ieee1394: Node changed: 0-01:1023 -> 0-00:1023 ieee1394: Node changed: 0-00:1023 -> 0-01:1023 scsi0 : SCSI emulation for IEEE-1394 SBP-2 Devices ieee1394: sbp2: Logged into SBP-2 device ieee1394: Node 0-00:1023: Max speed [S400] - Max payload [2048] Vendor: Maxtor Model: OneTouch Rev: 0200 Type: Direct-Access ANSI SCSI revision: 06 SCSI device sda: 398295040 512-byte hdwr sectors (203927 MB) sda: cache data unavailable sda: assuming drive cache: write through SCSI device sda: 398295040 512-byte hdwr sectors (203927 MB) sda: cache data unavailable sda: assuming drive cache: write through /dev/scsi/host0/bus0/target1/lun0: p1 Attached scsi disk sda at scsi0, channel 0, id 1, lun 0 ReiserFS: hda6: found reiserfs format "3.6" with standard journal ReiserFS: hda6: using ordered data mode ReiserFS: hda6: journal params: device hda6, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: hda6: checking transaction log (hda6) ReiserFS: hda6: Using r5 hash to sort names Freeing unused kernel memory: 296k freed usbcore: registered new driver usbfs usbcore: registered new driver hub USB Universal Host Controller Interface driver v2.2 uhci_hcd 0000:00:07.2: UHCI Host Controller uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:07.2: irq 3, io base 0x0000c400 hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected uhci_hcd 0000:00:07.3: UHCI Host Controller uhci_hcd 0000:00:07.3: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:07.3: irq 3, io base 0x0000c800 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) ohci_hcd 0000:02:08.0: OHCI Host Controller ohci_hcd 0000:02:08.0: new USB bus registered, assigned bus number 3 ohci_hcd 0000:02:08.0: irq 3, io mem 0xe8007000 hub 3-0:1.0: USB hub found hub 3-0:1.0: 3 ports detected ohci_hcd 0000:02:08.1: OHCI Host Controller ohci_hcd 0000:02:08.1: new USB bus registered, assigned bus number 4 ohci_hcd 0000:02:08.1: irq 5, io mem 0xe8004000 usb 3-2: new full speed USB device using ohci_hcd and address 2 hub 3-2:1.0: USB hub found hub 3-2:1.0: 4 ports detected hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected ehci_hcd 0000:02:08.2: EHCI Host Controller ehci_hcd 0000:02:08.2: new USB bus registered, assigned bus number 5 ehci_hcd 0000:02:08.2: irq 10, io mem 0xe8005000 ehci_hcd 0000:02:08.2: USB 2.0 initialized, EHCI 0.95, driver 10 Dec 2004 hub 5-0:1.0: USB hub found hub 5-0:1.0: 5 ports detected ts: Compaq touchscreen protocol output usb 5-3: new high speed USB device using ehci_hcd and address 3 hub 5-3:1.0: USB hub found hub 5-3:1.0: 4 ports detected usb 4-1: new full speed USB device using ohci_hcd and address 3 usb 3-2: USB disconnect, address 2 drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x03F0 pid 0xBA02 usbcore: registered new driver usblp drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver Initializing USB Mass Storage driver... scsi1 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 3 usb-storage: waiting for device to settle before scanning usbcore: registered new driver usb-storage USB Mass Storage support registered. Adding 2216928k swap on /dev/hda5. Priority:-1 extents:1 Linux agpgart interface v0.101 (c) Dave Jones agpgart: Detected VIA Apollo Pro 133 chipset agpgart: AGP aperture is 64M @ 0xe0000000 Vendor: HP Model: Photosmart 8100 Rev: 1.00 Type: Direct-Access ANSI SCSI revision: 02 Attached scsi removable disk sdb at scsi1, channel 0, id 0, lun 0 usb-storage: device scan complete ReiserFS: hda1: found reiserfs format "3.6" with standard journal ReiserFS: hda1: using ordered data mode ReiserFS: hda1: journal params: device hda1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: hda1: checking transaction log (hda1) ReiserFS: hda1: Using r5 hash to sort names ReiserFS: hda8: found reiserfs format "3.6" with standard journal ReiserFS: hda8: using ordered data mode ReiserFS: hda8: journal params: device hda8, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: hda8: checking transaction log (hda8) ReiserFS: hda8: Using r5 hash to sort names Supermount version 2.0.4 for kernel 2.6 ReiserFS: hda9: found reiserfs format "3.6" with standard journal ReiserFS: hda9: using ordered data mode ReiserFS: hda9: journal params: device hda9, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: hda9: checking transaction log (hda9) ReiserFS: hda9: Using r5 hash to sort names ReiserFS: hda7: found reiserfs format "3.6" with standard journal ReiserFS: hda7: using ordered data mode ReiserFS: hda7: journal params: device hda7, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: hda7: checking transaction log (hda7) ReiserFS: hda7: Using r5 hash to sort names loop: loaded (max 8 devices) hdc: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 27015 bytes,<6>...found (800x600, 26967 bytes, v3). bootsplash: status on console 0 changed to on ip_conntrack version 2.1 (8191 buckets, 65528 max) - 260 bytes per conntrack ip_tables: (C) 2000-2002 Netfilter core team Bridge firewalling registered Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 NET: Registered protocol family 17 Linux Tulip driver version 1.1.13 (May 11, 2002) tulip0: EEPROM default media type Autosense. tulip0: Index #0 - Media MII (#11) described by a 21140 MII PHY (1) block. tulip0: MII transceiver #3 config 3100 status 7809 advertising 01e1. eth0: Digital DS21140 Tulip rev 32 at 0001cc00, 00:00:C0:78:BC:F2, IRQ 10. eth0: Setting full-duplex based on MII#3 link partner capability of 05e1. parport_pc: VIA 686A/8231 detected parport_pc: probing current configuration parport_pc: Current parallel port base: 0x378 parport0: PC-style at 0x378 (0x778), irq 7, using FIFO [PCSPP,TRISTATE,COMPAT,ECP] parport0: Printer, HEWLETT-PACKARD DESKJET 895C parport_pc: VIA parallel port: io=0x378, irq=7 lp0: using parport0 (interrupt-driven). lp0: console ready ppdev: user-space parallel port driver ppdev0: registered pardevice ppdev0: negotiated back to compatibility mode because user-space forgot ppdev0: unregistered pardevice lp0: ECP mode lp0: ECP mode lp0: ECP mode lp0: ECP mode Model 1006 Rev 00000000 Serial 10061102 vmmon: module license 'unspecified' taints kernel. /dev/vmmon[3640]: Module vmmon: registered with major=10 minor=165 /dev/vmmon[3640]: Module vmmon: initialized /dev/vmnet: open called by PID 3681 (vmnet-bridge) /dev/vmnet: hub 0 does not exist, allocating memory. /dev/vmnet: port on hub 0 successfully opened bridge-eth0: enabling the bridge bridge-eth0: up bridge-eth0: already up bridge-eth0: attached /dev/vmnet: open called by PID 3698 (vmnet-natd) /dev/vmnet: hub 8 does not exist, allocating memory. /dev/vmnet: port on hub 8 successfully opened NET: Registered protocol family 10 Disabled Privacy Extensions on device c03f0460(lo) IPv6 over IPv4 tunneling driver NVRM: loading NVIDIA Linux x86 NVIDIA Kernel Module 1.0-8178 Wed Dec 14 16:22:51 PST 2005 NVRM: not using NVAGP, an AGPGART backend is loaded! NVRM: not using NVAGP, an AGPGART backend is loaded! /dev/vmnet: open called by PID 4223 (vmnet-netifup) /dev/vmnet: port on hub 8 successfully opened /dev/vmnet: open called by PID 4222 (vmnet-netifup) /dev/vmnet: hub 1 does not exist, allocating memory. /dev/vmnet: port on hub 1 successfully opened /dev/vmnet: open called by PID 4258 (vmnet-dhcpd) /dev/vmnet: port on hub 8 successfully opened /dev/vmnet: open called by PID 4255 (vmnet-dhcpd) /dev/vmnet: port on hub 1 successfully opened eth0: no IPv6 routers present vmnet1: no IPv6 routers present vmnet8: no IPv6 routers present bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (800x600, 9887 bytes, v3). bootsplash: status on console 0 changed to on bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (800x600, 9887 bytes, v3). bootsplash: status on console 1 changed to on bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (800x600, 9887 bytes, v3). bootsplash: status on console 2 changed to on bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (800x600, 9887 bytes, v3). bootsplash: status on console 3 changed to on bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (800x600, 9887 bytes, v3). bootsplash: status on console 4 changed to on bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (800x600, 9887 bytes, v3). bootsplash: status on console 5 changed to on -- DapperDrake Beta (April 20 release) install: DapperDrake fails to detect DECchip 21140 ethernet card https://launchpad.net/bugs/40994 From samtygier at yahoo.co.uk Sun Apr 23 22:42:03 2006 From: samtygier at yahoo.co.uk (sam tygier) Date: Sun, 23 Apr 2006 22:42:03 -0000 Subject: [Bug 40994] Re: DapperDrake Beta (April 20 release) install: DapperDrake fails to detect DECchip 21140 ethernet card References: <20060423222059.17643.87697.malonedeb@gandwana.ubuntu.com> Message-ID: <20060423224203.17643.48035.launchpad@gandwana.ubuntu.com> ** Changed in: Ubuntu Sourcepackagename: None => linux-source-2.6.15 -- DapperDrake Beta (April 20 release) install: DapperDrake fails to detect DECchip 21140 ethernet card https://launchpad.net/bugs/40994 From john.dong at gmail.com Sun Apr 23 22:49:49 2006 From: john.dong at gmail.com (John Dong) Date: Sun, 23 Apr 2006 22:49:49 -0000 Subject: [Bug 30984] Re: (Dapper) kernel 2.6.15.15-686 breaks freq scaling on core duo References: <20060209172346.25235.19539.malonedeb@gangotri.ubuntu.com> Message-ID: <20060423224949.4110.5586.malone@gangotri.ubuntu.com> I can confirm: (1) On a core duo laptop, the second core does not scale with the latest Dapper updates. (2) Installing powernowd 0.97 does remedy the situation. -- (Dapper) kernel 2.6.15.15-686 breaks freq scaling on core duo https://launchpad.net/bugs/30984 From dr.frog at shaw.ca Sun Apr 23 22:54:44 2006 From: dr.frog at shaw.ca (dr frog) Date: Sun, 23 Apr 2006 22:54:44 -0000 Subject: [Bug 40998] ati x1400 References: <20060423225444.4079.41877.malonedeb@gangotri.ubuntu.com> Message-ID: <20060423225444.4079.41877.malonedeb@gangotri.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: not detected by ubunto 6.06 i couldnt figure out how to config manually let me know and ill try to diagnose the card isnt detected ...unknown device let me know how i can help -- ati x1400 https://launchpad.net/bugs/40998 From dr.frog at shaw.ca Sun Apr 23 22:52:27 2006 From: dr.frog at shaw.ca (dr frog) Date: Sun, 23 Apr 2006 22:52:27 -0000 Subject: [Bug 35215] Re: ipw3945 driver required for functionality on new Intel PRO/Wireless 3945ABG Mini-PCI Express Adapters References: <20060316173707.11105.89035.malonedeb@gandwana.ubuntu.com> Message-ID: <20060423225228.4110.70599.malone@gangotri.ubuntu.com> gateway mx6708 on ubunto 6.06 still no luck with this intell wireless network adapter here either please let me know how i can assist -- ipw3945 driver required for functionality on new Intel PRO/Wireless 3945ABG Mini-PCI Express Adapters https://launchpad.net/bugs/35215 From ryan.sammartino at gmail.com Sun Apr 23 23:01:17 2006 From: ryan.sammartino at gmail.com (Ryan T. Sammartino) Date: Sun, 23 Apr 2006 23:01:17 -0000 Subject: [Bug 40996] DapperDrake Beta (April 20 release) install: DapperDrake fails to detect Creative Labs SB Audigy LS References: <20060423222810.4110.97833.malonedeb@gangotri.ubuntu.com> Message-ID: <20060423230117.4079.1269.launchpad@canonical@gangotri.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: (Per comments from Dennis Kaarsemaker on bug #40972, I am opening one bug per item not detected). Installing DapperDrake Beta (April 20 release) on my desktop system, which is on the old-ish side, DapperDrake fails to detect my Creative Labs SB Audigy LS. When I do 'lspci' or 'sudo lspci', there is no output. Here is what dmesg says: [4294667.296000] Linux version 2.6.15-20-386 (buildd at vernadsky) (gcc version 4.0.3 (Ubuntu 4.0.3-1ubuntu3)) #1 PREEMPT Tue Apr 4 17:48:51 UTC 2006 [4294667.296000] BIOS-provided physical RAM map: [4294667.296000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [4294667.296000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [4294667.296000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [4294667.296000] BIOS-e820: 0000000000100000 - 000000003fff0000 (usable) [4294667.296000] BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS) [4294667.296000] BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data) [4294667.296000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [4294667.296000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [4294667.296000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) [4294667.296000] 127MB HIGHMEM available. [4294667.296000] 896MB LOWMEM available. [4294667.296000] found SMP MP-table at 000f5770 [4294667.296000] On node 0 totalpages: 262128 [4294667.296000] DMA zone: 4096 pages, LIFO batch:0 [4294667.296000] DMA32 zone: 0 pages, LIFO batch:0 [4294667.296000] Normal zone: 225280 pages, LIFO batch:31 [4294667.296000] HighMem zone: 32752 pages, LIFO batch:7 [4294667.296000] DMI 2.3 present. [4294667.296000] ACPI: RSDP (v000 VIA694 ) @ 0x000f70b0 [4294667.296000] ACPI: RSDT (v001 VIA694 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff3000 [4294667.296000] ACPI: FADT (v001 VIA694 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff3040 [4294667.296000] ACPI: MADT (v001 VIA694 0x00000000 0x00000000) @ 0x3fff56c0 [4294667.296000] ACPI: DSDT (v001 VIA694 AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x00000000 [4294667.296000] ACPI: PM-Timer IO Port: 0x4008 [4294667.296000] ACPI: Local APIC address 0xfee00000 [4294667.296000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [4294667.296000] Processor #0 6:8 APIC version 17 [4294667.296000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [4294667.296000] Processor #1 6:8 APIC version 17 [4294667.296000] WARNING: NR_CPUS limit of 1 reached. Processor ignored. [4294667.296000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [4294667.296000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 [4294667.296000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [4294667.296000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 dfl dfl) [4294667.296000] ACPI: IRQ0 used by override. [4294667.296000] ACPI: IRQ2 used by override. [4294667.296000] ACPI: IRQ9 used by override. [4294667.296000] Enabling APIC mode: Flat. Using 1 I/O APICs [4294667.296000] Using ACPI (MADT) for SMP configuration information [4294667.296000] Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000) [4294667.296000] Built 1 zonelists [4294667.296000] Kernel command line: root=/dev/hda1 ro quiet splash [4294667.296000] mapped APIC to ffffd000 (fee00000) [4294667.296000] mapped IOAPIC to ffffc000 (fec00000) [4294667.296000] Initializing CPU#0 [4294667.296000] PID hash table entries: 4096 (order: 12, 65536 bytes) [4294667.296000] Detected 998.629 MHz processor. [4294667.296000] Using pmtmr for high-res timesource [4294667.296000] Console: colour VGA+ 80x25 [4294667.449000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [4294667.453000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [4294667.559000] Memory: 1028684k/1048512k available (1973k kernel code, 19108k reserved, 601k data, 288k init, 131008k highmem) [4294667.559000] Checking if this processor honours the WP bit even in supervisor mode... Ok. [4294667.619000] Calibrating delay using timer specific routine.. 1998.09 BogoMIPS (lpj=999046) [4294667.619000] Security Framework v1.0.0 initialized [4294667.619000] SELinux: Disabled at boot. [4294667.619000] Mount-cache hash table entries: 512 [4294667.619000] CPU: After generic identify, caps: 0387fbff 00000000 00000000 00000000 00000000 00000000 00000000 [4294667.619000] CPU: After vendor identify, caps: 0387fbff 00000000 00000000 00000000 00000000 00000000 00000000 [4294667.619000] CPU: L1 I cache: 16K, L1 D cache: 16K [4294667.619000] CPU: L2 cache: 256K [4294667.619000] CPU serial number disabled. [4294667.619000] CPU: After all inits, caps: 0383fbff 00000000 00000000 00000040 00000000 00000000 00000000 [4294667.619000] mtrr: v2.0 (20020519) [4294667.619000] CPU: Intel Pentium III (Coppermine) stepping 0a [4294667.619000] Enabling fast FPU save and restore... done. [4294667.619000] Enabling unmasked SIMD FPU exception support... done. [4294667.619000] Checking 'hlt' instruction... OK. [4294667.623000] checking if image is initramfs... it is [4294669.193000] Freeing initrd memory: 6787k freed [4294669.218000] ACPI: Looking for DSDT ... not found! [4294669.287000] ENABLING IO-APIC IRQs [4294669.287000] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [4294669.398000] NET: Registered protocol family 16 [4294669.398000] EISA bus registered [4294669.398000] ACPI: bus type pci registered [4294669.414000] PCI: PCI BIOS revision 2.10 entry at 0xfb3a0, last bus=2 [4294669.414000] PCI: Using configuration type 1 [4294669.415000] ACPI: Subsystem revision 20051216 [4294669.426000] ACPI: Interpreter enabled [4294669.426000] ACPI: Using IOAPIC for interrupt routing [4294669.427000] ACPI: PCI Root Bridge [PCI0] (0000:00) [4294669.427000] PCI: Probing PCI hardware (bus 00) [4294669.427000] ACPI: Assume root bridge [\_SB_.PCI0] bus is 0 [4294669.431000] PCI quirk: region 6000-607f claimed by vt82c686 HW-mon [4294669.431000] PCI quirk: region 5000-500f claimed by vt82c686 SMB [4294669.431000] Boot video device is 0000:01:00.0 [4294669.432000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [4294669.433000] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 11 12 14 15) [4294669.434000] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *10 11 12 14 15) [4294669.434000] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 *11 12 14 15) [4294669.435000] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 *3 4 5 6 7 10 11 12 14 15) [4294669.439000] Linux Plug and Play Support v0.97 (c) Adam Belay [4294669.439000] pnp: PnP ACPI init [4294669.445000] pnp: PnP ACPI: found 11 devices [4294669.445000] PnPBIOS: Disabled by ACPI PNP [4294669.445000] PCI: Using ACPI for IRQ routing [4294669.445000] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [4294669.446000] PCI: Bridge: 0000:00:01.0 [4294669.446000] IO window: disabled. [4294669.446000] MEM window: e4000000-e6ffffff [4294669.446000] PREFETCH window: d0000000-dfffffff [4294669.446000] PCI: Bridge: 0000:00:0c.0 [4294669.446000] IO window: disabled. [4294669.446000] MEM window: e8000000-e80fffff [4294669.446000] PREFETCH window: disabled. [4294669.446000] PCI: Setting latency timer of device 0000:00:01.0 to 64 [4294669.447000] audit: initializing netlink socket (disabled) [4294669.447000] audit(1145820526.446:1): initialized [4294669.447000] highmem bounce pool size: 64 pages [4294669.447000] VFS: Disk quotas dquot_6.5.1 [4294669.447000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [4294669.447000] Initializing Cryptographic API [4294669.447000] io scheduler noop registered [4294669.448000] io scheduler anticipatory registered [4294669.448000] io scheduler deadline registered [4294669.448000] io scheduler cfq registered [4294669.448000] isapnp: Scanning for PnP cards... [4294669.805000] isapnp: No Plug & Play device found [4294669.836000] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [4294669.836000] serio: i8042 AUX port at 0x60,0x64 irq 12 [4294669.836000] serio: i8042 KBD port at 0x60,0x64 irq 1 [4294669.836000] Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled [4294669.836000] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [4294669.841000] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [4294669.842000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [4294669.842000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [4294669.842000] ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx [4294669.842000] ACPI: bus type ide registered [4294669.842000] mice: PS/2 mouse device common for all mice [4294669.843000] EISA: Probing bus 0 at eisa.0 [4294669.843000] Cannot allocate resource for EISA slot 1 [4294669.843000] Cannot allocate resource for EISA slot 4 [4294669.843000] Cannot allocate resource for EISA slot 5 [4294669.843000] Cannot allocate resource for EISA slot 6 [4294669.843000] EISA: Detected 0 cards. [4294669.843000] NET: Registered protocol family 2 [4294669.852000] IP route cache hash table entries: 65536 (order: 6, 262144 bytes) [4294669.852000] TCP established hash table entries: 262144 (order: 8, 1048576 bytes) [4294669.858000] TCP bind hash table entries: 65536 (order: 6, 262144 bytes) [4294669.859000] TCP: Hash tables configured (established 262144 bind 65536) [4294669.859000] TCP reno registered [4294669.859000] TCP bic registered [4294669.859000] NET: Registered protocol family 1 [4294669.860000] NET: Registered protocol family 8 [4294669.860000] NET: Registered protocol family 20 [4294669.860000] Using IPI Shortcut mode [4294669.860000] ACPI wakeup devices: [4294669.860000] PCI0 USB0 USB1 MODM UAR1 ECP1 [4294669.860000] ACPI: (supports S0 S1 S4 S5) [4294669.860000] Freeing unused kernel memory: 288k freed [4294669.866000] input: AT Translated Set 2 keyboard as /class/input/input0 [4294670.018000] vga16fb: initializing [4294670.018000] vga16fb: mapped to 0xc00a0000 [4294670.218000] Console: switching to colour frame buffer device 80x25 [4294670.218000] fb0: VGA16 VGA frame buffer device [4294671.248000] Capability LSM initialized [4294672.513000] Probing IDE interface ide0... [4294672.899000] hda: Maxtor 6B200P0, ATA DISK drive [4294673.511000] Probing IDE interface ide1... [4294674.305000] hdc: ATAPI DVD DD 2X16X4X16, ATAPI CD/DVD-ROM drive [4294674.917000] Probing IDE interface ide2... [4294675.430000] Probing IDE interface ide3... [4294675.943000] Probing IDE interface ide4... [4294676.456000] Probing IDE interface ide5... [4294676.969000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [4294676.969000] ide1 at 0x170-0x177,0x376 on irq 15 [4294676.984000] hda: max request size: 1024KiB [4294677.005000] hda: 398297088 sectors (203928 MB) w/8192KiB Cache, CHS=24792/255/63 [4294677.007000] hda: cache flushes supported [4294677.007000] hda: hda1 hda2 hda3 [4294677.047000] hdc: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache [4294677.047000] Uniform CD-ROM driver Revision: 3.20 [4294677.491000] EXT3-fs: mounted filesystem with ordered data mode. [4294677.491000] kjournald starting. Commit interval 5 seconds [4294711.820000] input: PC Speaker as /class/input/input1 [4294712.136000] logips2pp: Detected unknown logitech mouse model 11 [4294712.231000] input: PS/2 Logitech Mouse as /class/input/input2 [4294712.285000] ts: Compaq touchscreen protocol output [4294712.436000] parport: PnPBIOS parport detected. [4294712.436000] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA] [4294712.451000] Real Time Clock Driver v1.12 [4294712.464000] parport0: Printer, HEWLETT-PACKARD DESKJET 895C [4294712.566000] Floppy drive(s): fd0 is 1.44M [4294712.580000] FDC 0 is a post-1991 82077 [4294712.903000] Adding 2048276k swap on /dev/hda3. Priority:-1 extents:1 across:2048276k [4294712.992000] EXT3 FS on hda1, internal journal [4294713.297000] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 [4294713.297000] md: bitmap version 4.39 [4294714.061000] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel at redhat.com [4294714.617000] cdrom: open failed. [4294715.484000] kjournald starting. Commit interval 5 seconds [4294715.486000] EXT3 FS on hda2, internal journal [4294715.486000] EXT3-fs: mounted filesystem with ordered data mode. [4294717.575000] ACPI: Power Button (FF) [PWRF] [4294717.575000] ACPI: Power Button (CM) [PWRB] [4294717.806000] ibm_acpi: ec object not found [4294717.855000] pcc_acpi: loading... [4294728.380000] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac) [4294728.380000] apm: overridden by ACPI. [4294737.900000] hdc: drive_cmd: status=0x51 { DriveReady SeekComplete Error } [4294737.900000] hdc: drive_cmd: error=0x04 { AbortedCommand } [4294737.900000] ide: failed opcode was: 0xec [4294737.994000] hdc: drive_cmd: status=0x51 { DriveReady SeekComplete Error } [4294737.995000] hdc: drive_cmd: error=0x04 { AbortedCommand } [4294737.995000] ide: failed opcode was: 0xec [4294738.378000] Bluetooth: Core ver 2.8 [4294738.378000] NET: Registered protocol family 31 [4294738.378000] Bluetooth: HCI device and connection manager initialized [4294738.378000] Bluetooth: HCI socket layer initialized [4294738.440000] Bluetooth: L2CAP ver 2.8 [4294738.440000] Bluetooth: L2CAP socket layer initialized [4294738.491000] Bluetooth: RFCOMM socket layer initialized [4294738.491000] Bluetooth: RFCOMM TTY layer initialized [4294738.491000] Bluetooth: RFCOMM ver 1.7 [4294773.437000] NET: Registered protocol family 10 [4294773.437000] lo: Disabled Privacy Extensions [4294773.438000] IPv6 over IPv4 tunneling driver [4295627.959000] cdrom: This disc doesn't have any tracks I recognize! For comparison, here is what lspci and dmesg say when I boot up Mandriva: $ lspci 00:00.0 Host bridge: VIA Technologies, Inc. VT82C693A/694x [Apollo PRO133x] (rev c4) 00:01.0 PCI bridge: VIA Technologies, Inc. VT82C598/694x [Apollo MVP3/Pro133x AGP] 00:07.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super South] (rev 40) 00:07.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06) 00:07.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 16) 00:07.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 16) 00:07.4 Bridge: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] (rev 40) 00:0b.0 Ethernet controller: Digital Equipment Corporation DECchip 21140 [FasterNet] (rev 20) 00:0c.0 PCI bridge: Hint Corp HB6 Universal PCI-PCI bridge (non-transparent mode) (rev 15) 00:0d.0 Multimedia audio controller: Creative Labs SB Audigy LS 00:0e.0 Mass storage controller: Triones Technologies, Inc. HPT366/368/370/370A/372/372N (rev 03) 01:00.0 VGA compatible controller: nVidia Corporation GeForce 6200 (rev a1) 02:08.0 USB Controller: NEC Corporation USB (rev 41) 02:08.1 USB Controller: NEC Corporation USB (rev 41) 02:08.2 USB Controller: NEC Corporation USB 2.0 (rev 02) 02:0c.0 FireWire (IEEE 1394): Texas Instruments TSB43AB23 IEEE-1394a-2000 Controller (PHY/Link) $ dmesg Linux version 2.6.12-17mdksmp (qateam at mercury.mandriva.com) (gcc version 4.0.1 (4.0.1-5mdk for Mandriva Linux release 2006.0)) #1 SMP Mon Feb 13 12:10:24 MST 2006 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003fff0000 (usable) BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS) BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) user-defined physical RAM map: user: 0000000000000000 - 000000000009fc00 (usable) user: 000000000009fc00 - 00000000000a0000 (reserved) user: 00000000000f0000 - 0000000000100000 (reserved) user: 0000000000100000 - 000000003fff0000 (usable) user: 000000003fff0000 - 000000003fff3000 (ACPI NVS) user: 000000003fff3000 - 0000000040000000 (ACPI data) user: 00000000fec00000 - 00000000fec01000 (reserved) user: 00000000fee00000 - 00000000fee01000 (reserved) user: 00000000ffff0000 - 0000000100000000 (reserved) 127MB HIGHMEM available. 896MB LOWMEM available. found SMP MP-table at 000f5770 On node 0 totalpages: 262128 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 225280 pages, LIFO batch:31 HighMem zone: 32752 pages, LIFO batch:15 DMI 2.3 present. ACPI: RSDP (v000 VIA694 ) @ 0x000f70b0 ACPI: RSDT (v001 VIA694 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff3000 ACPI: FADT (v001 VIA694 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff3040 ACPI: MADT (v001 VIA694 0x00000000 0x00000000) @ 0x3fff56c0 ACPI: DSDT (v001 VIA694 AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x00000000 ACPI: PM-Timer IO Port: 0x4008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 6:8 APIC version 17 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) Processor #1 6:8 APIC version 17 Using ACPI for processor (LAPIC) configuration information Intel MultiProcessor Specification v1.1 Virtual Wire compatibility mode. OEM ID: OEM00000 Product ID: PROD00000000 APIC at: 0xFEE00000 I/O APIC #2 Version 17 at 0xFEC00000. Enabling APIC mode: Flat. Using 1 I/O APICs Processors: 2 Allocating PCI resources starting at 40000000 (gap: 40000000:bec00000) Built 1 zonelists mapped APIC to ffffd000 (fee00000) mapped IOAPIC to ffffc000 (fec00000) Initializing CPU#0 Kernel command line: auto BOOT_IMAGE=linux root=306 acpi=ht resume=/dev/hda5 mem=1024M splash=silent bootsplash: silent mode. PID hash table entries: 4096 (order: 12, 65536 bytes) Detected 998.795 MHz processor. Using pmtmr for high-res timesource Console: colour dummy device 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 1033224k/1048512k available (2451k kernel code, 14508k reserved, 788k data, 296k init, 131008k highmem, 0k BadRAM) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay loop... 1978.36 BogoMIPS (lpj=989184) Mount-cache hash table entries: 512 CPU: After generic identify, caps: 0387fbff 00000000 00000000 00000000 00000000 00000000 00000000 CPU: After vendor identify, caps: 0387fbff 00000000 00000000 00000000 00000000 00000000 00000000 CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 256K CPU serial number disabled. CPU: After all inits, caps: 0383fbff 00000000 00000000 00000040 00000000 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. CPU0: Intel Pentium III (Coppermine) stepping 0a Enabling SMP... Booting processor 1/1 eip 3000 Initializing CPU#1 Calibrating delay loop... 1994.75 BogoMIPS (lpj=997376) CPU: After generic identify, caps: 0387fbff 00000000 00000000 00000000 00000000 00000000 00000000 CPU: After vendor identify, caps: 0387fbff 00000000 00000000 00000000 00000000 00000000 00000000 CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 256K CPU serial number disabled. CPU: After all inits, caps: 0383fbff 00000000 00000000 00000040 00000000 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. CPU1: Intel Pentium III (Coppermine) stepping 0a Total of 2 processors activated (3973.12 BogoMIPS). ENABLING IO-APIC IRQs ..TIMER: vector=0x31 pin1=2 pin2=0 checking TSC synchronization across 2 CPUs: passed. Enabling SMP... Brought up 2 CPUs CPU0 attaching sched-domain: domain 0: span 00000001 groups: 00000001 domain 1: span 00000003 groups: 00000001 00000002 CPU1 attaching sched-domain: domain 0: span 00000002 groups: 00000002 domain 1: span 00000003 groups: 00000002 00000001 checking if image is initramfs...it isn't (bad gzip magic numbers); looks like an initrd Freeing initrd memory: 480k freed NET: Registered protocol family 16 PCI: PCI BIOS revision 2.10 entry at 0xfb3a0, last bus=2 PCI: Using configuration type 1 mtrr: v2.0 (20020519) mtrr: your CPUs had inconsistent variable MTRR settings mtrr: probably your BIOS does not setup all CPUs. mtrr: corrected configuration. ACPI: Subsystem revision 20050309 ACPI: Interpreter disabled. Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI: disabled PnPBIOS: Disabled PCI: Probing PCI hardware PCI: Probing PCI hardware (bus 00) Boot video device is 0000:01:00.0 PCI: Using IRQ router VIA [1106/0686] at 0000:00:07.0 apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac) apm: disabled - APM is not SMP safe. audit: initializing netlink socket (disabled) audit(1145807852.975:0): initialized highmem bounce pool size: 64 pages VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) devfs: 2004-01-31 Richard Gooch (rgooch at atnf.csiro.au) devfs: boot_options: 0x0 Initializing Cryptographic API PCI: Enabling Via external APIC routing vesafb: framebuffer at 0xd0000000, mapped to 0xf8880000, using 3750k, total 262144k vesafb: mode is 800x600x16, linelength=1600, pages=2 vesafb: protected mode interface info at c000:d2b0 vesafb: scrolling: redraw vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 27015 bytes,<6>...found (800x600, 26967 bytes, v3). Console: switching to colour frame buffer device 93x30 fb0: VESA VGA frame buffer device isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Real Time Clock Driver v1.12 PNP: No PS/2 controller found. Probing ports directly. serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered RAMDISK driver initialized: 16 RAM disks of 32000K size 1024 blocksize pktcdvd: v0.2.0a 2004-07-14 Jens Axboe (axboe at suse.de) and petero2 at telia.com Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: IDE controller at PCI slot 0000:00:07.1 PCI: Via IRQ fixup for 0000:00:07.1, from 255 to 0 VP_IDE: chipset revision 6 VP_IDE: not 100% native mode: will probe irqs later VP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on pci0000:00:07.1 ide0: BM-DMA at 0xc000-0xc007, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xc008-0xc00f, BIOS settings: hdc:DMA, hdd:pio Probing IDE interface ide0... hda: Maxtor 6B200P0, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hdc: ATAPI DVD DD 2X16X4X16, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 HPT370: IDE controller at PCI slot 0000:00:0e.0 HPT370: chipset revision 3 HPT37X: using 33MHz PCI clock HPT370: 100% native mode on irq 11 ide2: BM-DMA at 0xe400-0xe407, BIOS settings: hde:pio, hdf:pio ide3: BM-DMA at 0xe408-0xe40f, BIOS settings: hdg:pio, hdh:pio Probing IDE interface ide2... Probing IDE interface ide3... hda: max request size: 1024KiB hda: 398297088 sectors (203928 MB) w/8192KiB Cache, CHS=24792/255/63, UDMA(33) hda: cache flushes supported /dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 p6 p7 p8 p9 > mice: PS/2 mouse device common for all mice md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27 NET: Registered protocol family 2 IP: routing cache hash table of 8192 buckets, 64Kbytes TCP established hash table entries: 262144 (order: 9, 2097152 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 262144 bind 65536) NET: Registered protocol family 1 Starting balanced_irq BIOS EDD facility v0.16 2004-Jun-25, 1 devices found devfs_mk_dev: could not append to parent for md/0 md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. RAMDISK: cramfs filesystem found at block 0 RAMDISK: Loading 428KiB [1 disk] into ram disk... done. VFS: Mounted root (cramfs filesystem) readonly. input: AT Translated Set 2 keyboard on isa0060/serio0 ieee1394: Initialized config rom entry `ip1394' ohci1394: $Rev: 1250 $ Ben Collins ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[3] MMIO=[e8006000-e80067ff] Max Packet=[2048] SCSI subsystem initialized sbp2: $Rev: 1219 $ Ben Collins logips2pp: Detected unknown logitech mouse model 11 input: PS/2 Logitech Mouse on isa0060/serio1 ieee1394: Host added: ID:BUS[0-00:1023] GUID[005042b5c00d1769] ieee1394: Node added: ID:BUS[0-01:1023] GUID[0010b9f701038335] ieee1394: The root node is not cycle master capable; selecting a new root node and resetting... ieee1394: Node changed: 0-01:1023 -> 0-00:1023 ieee1394: Node changed: 0-00:1023 -> 0-01:1023 scsi0 : SCSI emulation for IEEE-1394 SBP-2 Devices ieee1394: sbp2: Logged into SBP-2 device ieee1394: Node 0-00:1023: Max speed [S400] - Max payload [2048] Vendor: Maxtor Model: OneTouch Rev: 0200 Type: Direct-Access ANSI SCSI revision: 06 SCSI device sda: 398295040 512-byte hdwr sectors (203927 MB) sda: cache data unavailable sda: assuming drive cache: write through SCSI device sda: 398295040 512-byte hdwr sectors (203927 MB) sda: cache data unavailable sda: assuming drive cache: write through /dev/scsi/host0/bus0/target1/lun0: p1 Attached scsi disk sda at scsi0, channel 0, id 1, lun 0 ReiserFS: hda6: found reiserfs format "3.6" with standard journal ReiserFS: hda6: using ordered data mode ReiserFS: hda6: journal params: device hda6, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: hda6: checking transaction log (hda6) ReiserFS: hda6: Using r5 hash to sort names Freeing unused kernel memory: 296k freed usbcore: registered new driver usbfs usbcore: registered new driver hub USB Universal Host Controller Interface driver v2.2 uhci_hcd 0000:00:07.2: UHCI Host Controller uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:07.2: irq 3, io base 0x0000c400 hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected uhci_hcd 0000:00:07.3: UHCI Host Controller uhci_hcd 0000:00:07.3: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:07.3: irq 3, io base 0x0000c800 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) ohci_hcd 0000:02:08.0: OHCI Host Controller ohci_hcd 0000:02:08.0: new USB bus registered, assigned bus number 3 ohci_hcd 0000:02:08.0: irq 3, io mem 0xe8007000 hub 3-0:1.0: USB hub found hub 3-0:1.0: 3 ports detected ohci_hcd 0000:02:08.1: OHCI Host Controller ohci_hcd 0000:02:08.1: new USB bus registered, assigned bus number 4 ohci_hcd 0000:02:08.1: irq 5, io mem 0xe8004000 usb 3-2: new full speed USB device using ohci_hcd and address 2 hub 3-2:1.0: USB hub found hub 3-2:1.0: 4 ports detected hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected ehci_hcd 0000:02:08.2: EHCI Host Controller ehci_hcd 0000:02:08.2: new USB bus registered, assigned bus number 5 ehci_hcd 0000:02:08.2: irq 10, io mem 0xe8005000 ehci_hcd 0000:02:08.2: USB 2.0 initialized, EHCI 0.95, driver 10 Dec 2004 hub 5-0:1.0: USB hub found hub 5-0:1.0: 5 ports detected ts: Compaq touchscreen protocol output usb 5-3: new high speed USB device using ehci_hcd and address 3 hub 5-3:1.0: USB hub found hub 5-3:1.0: 4 ports detected usb 4-1: new full speed USB device using ohci_hcd and address 3 usb 3-2: USB disconnect, address 2 drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x03F0 pid 0xBA02 usbcore: registered new driver usblp drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver Initializing USB Mass Storage driver... scsi1 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 3 usb-storage: waiting for device to settle before scanning usbcore: registered new driver usb-storage USB Mass Storage support registered. Adding 2216928k swap on /dev/hda5. Priority:-1 extents:1 Linux agpgart interface v0.101 (c) Dave Jones agpgart: Detected VIA Apollo Pro 133 chipset agpgart: AGP aperture is 64M @ 0xe0000000 Vendor: HP Model: Photosmart 8100 Rev: 1.00 Type: Direct-Access ANSI SCSI revision: 02 Attached scsi removable disk sdb at scsi1, channel 0, id 0, lun 0 usb-storage: device scan complete ReiserFS: hda1: found reiserfs format "3.6" with standard journal ReiserFS: hda1: using ordered data mode ReiserFS: hda1: journal params: device hda1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: hda1: checking transaction log (hda1) ReiserFS: hda1: Using r5 hash to sort names ReiserFS: hda8: found reiserfs format "3.6" with standard journal ReiserFS: hda8: using ordered data mode ReiserFS: hda8: journal params: device hda8, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: hda8: checking transaction log (hda8) ReiserFS: hda8: Using r5 hash to sort names Supermount version 2.0.4 for kernel 2.6 ReiserFS: hda9: found reiserfs format "3.6" with standard journal ReiserFS: hda9: using ordered data mode ReiserFS: hda9: journal params: device hda9, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: hda9: checking transaction log (hda9) ReiserFS: hda9: Using r5 hash to sort names ReiserFS: hda7: found reiserfs format "3.6" with standard journal ReiserFS: hda7: using ordered data mode ReiserFS: hda7: journal params: device hda7, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: hda7: checking transaction log (hda7) ReiserFS: hda7: Using r5 hash to sort names loop: loaded (max 8 devices) hdc: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 27015 bytes,<6>...found (800x600, 26967 bytes, v3). bootsplash: status on console 0 changed to on ip_conntrack version 2.1 (8191 buckets, 65528 max) - 260 bytes per conntrack ip_tables: (C) 2000-2002 Netfilter core team Bridge firewalling registered Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 NET: Registered protocol family 17 Linux Tulip driver version 1.1.13 (May 11, 2002) tulip0: EEPROM default media type Autosense. tulip0: Index #0 - Media MII (#11) described by a 21140 MII PHY (1) block. tulip0: MII transceiver #3 config 3100 status 7809 advertising 01e1. eth0: Digital DS21140 Tulip rev 32 at 0001cc00, 00:00:C0:78:BC:F2, IRQ 10. eth0: Setting full-duplex based on MII#3 link partner capability of 05e1. parport_pc: VIA 686A/8231 detected parport_pc: probing current configuration parport_pc: Current parallel port base: 0x378 parport0: PC-style at 0x378 (0x778), irq 7, using FIFO [PCSPP,TRISTATE,COMPAT,ECP] parport0: Printer, HEWLETT-PACKARD DESKJET 895C parport_pc: VIA parallel port: io=0x378, irq=7 lp0: using parport0 (interrupt-driven). lp0: console ready ppdev: user-space parallel port driver ppdev0: registered pardevice ppdev0: negotiated back to compatibility mode because user-space forgot ppdev0: unregistered pardevice lp0: ECP mode lp0: ECP mode lp0: ECP mode lp0: ECP mode Model 1006 Rev 00000000 Serial 10061102 vmmon: module license 'unspecified' taints kernel. /dev/vmmon[3640]: Module vmmon: registered with major=10 minor=165 /dev/vmmon[3640]: Module vmmon: initialized /dev/vmnet: open called by PID 3681 (vmnet-bridge) /dev/vmnet: hub 0 does not exist, allocating memory. /dev/vmnet: port on hub 0 successfully opened bridge-eth0: enabling the bridge bridge-eth0: up bridge-eth0: already up bridge-eth0: attached /dev/vmnet: open called by PID 3698 (vmnet-natd) /dev/vmnet: hub 8 does not exist, allocating memory. /dev/vmnet: port on hub 8 successfully opened NET: Registered protocol family 10 Disabled Privacy Extensions on device c03f0460(lo) IPv6 over IPv4 tunneling driver NVRM: loading NVIDIA Linux x86 NVIDIA Kernel Module 1.0-8178 Wed Dec 14 16:22:51 PST 2005 NVRM: not using NVAGP, an AGPGART backend is loaded! NVRM: not using NVAGP, an AGPGART backend is loaded! /dev/vmnet: open called by PID 4223 (vmnet-netifup) /dev/vmnet: port on hub 8 successfully opened /dev/vmnet: open called by PID 4222 (vmnet-netifup) /dev/vmnet: hub 1 does not exist, allocating memory. /dev/vmnet: port on hub 1 successfully opened /dev/vmnet: open called by PID 4258 (vmnet-dhcpd) /dev/vmnet: port on hub 8 successfully opened /dev/vmnet: open called by PID 4255 (vmnet-dhcpd) /dev/vmnet: port on hub 1 successfully opened eth0: no IPv6 routers present vmnet1: no IPv6 routers present vmnet8: no IPv6 routers present bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (800x600, 9887 bytes, v3). bootsplash: status on console 0 changed to on bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (800x600, 9887 bytes, v3). bootsplash: status on console 1 changed to on bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (800x600, 9887 bytes, v3). bootsplash: status on console 2 changed to on bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (800x600, 9887 bytes, v3). bootsplash: status on console 3 changed to on bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (800x600, 9887 bytes, v3). bootsplash: status on console 4 changed to on bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (800x600, 9887 bytes, v3). bootsplash: status on console 5 changed to on -- DapperDrake Beta (April 20 release) install: DapperDrake fails to detect Creative Labs SB Audigy LS https://launchpad.net/bugs/40996 From dennis at kaarsemaker.net Sun Apr 23 23:01:17 2006 From: dennis at kaarsemaker.net (Dennis Kaarsemaker) Date: Sun, 23 Apr 2006 23:01:17 -0000 Subject: [Bug 40996] Re: DapperDrake Beta (April 20 release) install: DapperDrake fails to detect Creative Labs SB Audigy LS References: <20060423222810.4110.97833.malonedeb@gangotri.ubuntu.com> Message-ID: <20060423230117.4079.53478.launchpad@gangotri.ubuntu.com> ** Changed in: Ubuntu Sourcepackagename: None => linux-source-2.6.15 -- DapperDrake Beta (April 20 release) install: DapperDrake fails to detect Creative Labs SB Audigy LS https://launchpad.net/bugs/40996 From dennis at kaarsemaker.net Sun Apr 23 23:09:08 2006 From: dennis at kaarsemaker.net (Dennis Kaarsemaker) Date: Sun, 23 Apr 2006 23:09:08 -0000 Subject: [Bug 40998] Re: [Bug 40998] ati x1400 References: <20060423225444.4079.41877.malonedeb@gangotri.ubuntu.com> Message-ID: <1145833748.2455.25.camel@mirage> You will need to try the very latest iso's to get the correct linux-restricted-modules for your card. -- ati x1400 https://launchpad.net/bugs/40998 From dennis at kaarsemaker.net Sun Apr 23 23:10:52 2006 From: dennis at kaarsemaker.net (Dennis Kaarsemaker) Date: Sun, 23 Apr 2006 23:10:52 -0000 Subject: [Bug 38884] Re: [Bug 38884] Re: rtl818x - System hangs when uploading files. References: <20060409144601.32233.18688.malonedeb@gandwana.ubuntu.com> <20060423193154.4110.56964.malone@gangotri.ubuntu.com> Message-ID: <1145833852.2455.27.camel@mirage> Excellent, so BenC is also fixing bugs and not just introducing them ;) status FixReleased ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Unconfirmed => Fix Released -- rtl818x - System hangs when uploading files. https://launchpad.net/bugs/38884 From ramon at cambridgelaan.nl Sun Apr 23 23:30:56 2006 From: ramon at cambridgelaan.nl (Ramon Hollands) Date: Sun, 23 Apr 2006 23:30:56 -0000 Subject: [Bug 40253] Re: hibernate, sleep does not work References: <20060420004855.21526.1939.malonedeb@gangotri.ubuntu.com> Message-ID: <20060423233056.4110.46370.malone@gangotri.ubuntu.com> Since running the package manager and updating my packages on last saterday it works now.... I have an ati card. Guess there were some usefull updates? Sleep, on the other hand still does not work. It goes in sleep mode very well, and wakes up but hangs the system. -- hibernate, sleep does not work https://launchpad.net/bugs/40253 From dr.frog at shaw.ca Sun Apr 23 23:41:24 2006 From: dr.frog at shaw.ca (dr frog) Date: Sun, 23 Apr 2006 23:41:24 -0000 Subject: [Bug 40998] Re: ati x1400 References: <20060423225444.4079.41877.malonedeb@gangotri.ubuntu.com> Message-ID: <20060423234124.17643.41863.malone@gandwana.ubuntu.com> im using the iso release on april 20th should i be using the flight 6? -- ati x1400 https://launchpad.net/bugs/40998 From jmsunseri at gmail.com Mon Apr 24 00:24:15 2006 From: jmsunseri at gmail.com (Justin Sunseri) Date: Mon, 24 Apr 2006 00:24:15 -0000 Subject: [Bug 39517] Re: Inaudible sound on Lenovo 3000 N100-07684JU References: <20060414005338.1627.82345.malonedeb@gangotri.ubuntu.com> Message-ID: <20060424002415.4079.48247.malone@gangotri.ubuntu.com> after the update of the kernel today to 2.6.15-21.32 sound works properly without having to modprobe any extra modules. I would say this bug has been fixed. -- Inaudible sound on Lenovo 3000 N100-07684JU https://launchpad.net/bugs/39517 From ivan.matveich at gmail.com Mon Apr 24 00:24:56 2006 From: ivan.matveich at gmail.com (Ivan Matveich) Date: Mon, 24 Apr 2006 00:24:56 -0000 Subject: [Bug 39185] That worked, thanks. References: <20060411193018.32313.43105.malonedeb@gandwana.ubuntu.com> Message-ID: <20060424002456.17670.13306.malone@gandwana.ubuntu.com> My spdif output now works fine. -- M-Audio Delta 1010LT SPDIF output does not work. https://launchpad.net/bugs/39185 From miles.lane at gmaIl.com Mon Apr 24 00:25:34 2006 From: miles.lane at gmaIl.com (Miles Lane) Date: Mon, 24 Apr 2006 00:25:34 -0000 Subject: [Bug 40883] Re: Touching keyboard keys doesn't cause laptop to resume References: <20060423074031.17643.93780.malonedeb@gandwana.ubuntu.com> Message-ID: <20060424002534.17670.87959.malone@gandwana.ubuntu.com> FWIW, my laptop is an HP dv1240us. -- Touching keyboard keys doesn't cause laptop to resume https://launchpad.net/bugs/40883 From agblazquez at telefonica.net Mon Apr 24 00:41:08 2006 From: agblazquez at telefonica.net (=?utf-8?q?Adolfo_Gonz=C3=A1lez_Bl=C3=A1zquez?=) Date: Mon, 24 Apr 2006 00:41:08 -0000 Subject: [Bug 41015] [ALSA] Master volume control doesn't control Headphone control References: <20060424004108.4110.947.malonedeb@gangotri.ubuntu.com> Message-ID: <20060424004108.4110.947.malonedeb@gangotri.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: Hello, I have an integrated Intel ICH6 with AD1981B sound card on my laptop (HP Compaq nx8220). I usually use some speakers connected to the Headphone line out. In Breezy, when using the Master Volume Control you could control everysound in the computer (internal speakers and headphones). In Dapper, this doesn't work anymore. So i need to low Headphone Volume control to quiet the external speakers. I think the default behaviour should be the breezy one, so the master volume control everysound in the computer. I am using Dapper up-to-date, with kernel 2.6.15-21-686 Hope this can be fixed before Dapper is released. $ cat /proc/asound/cards 0 [ICH6 ]: ICH4 - Intel ICH6 Intel ICH6 with AD1981B at 0xc8c01000, irq 50 $ cat /proc/asound/card0/codec97#0/ac97#0-0 0-0/0: Analog Devices AD1981B Capabilities : -headphone out- DAC resolution : 20-bit ADC resolution : 16-bit 3D enhancement : No 3D Stereo Enhancement Current setup Mic gain : +0dB [+0dB] POP path : pre 3D Sim. stereo : off 3D enhancement : off Loudness : off Mono output : MIX Mic select : Mic1 ADC/DAC loopback : off Extended ID : codec=0 rev=1 AMAP DSA=0 VRA Extended status : VRA PCM front DAC : 48000Hz PCM ADC : 48000Hz AD18XX configuration Unchained : 0x1000,0x0000,0x0000 Chained : 0x0000,0x0000,0x0000 $ sudo lspci -vvv 0000:00:1e.2 Multimedia audio controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Audio Controller (rev 03) Subsystem: Hewlett-Packard Company: Unknown device 0934 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Message-ID: <20060424012405.17643.16395.malone@gandwana.ubuntu.com> I can confirm this bug also occurs on an AMD3500+ chip and a Pentium IV 2.4ghz chip, using x86 version of Dapper Beta. Jumping signal strength, random freezes and all. Same card in two different PCs had exactly the same symptoms. Card was an otherwise unnamed Excel 11mb/s PCI card using the rtl8180l chipset. So looking like it's a driver thing, as opposed to a driver and certain obscure hardware issue? -- r818x driver freezes randomly https://launchpad.net/bugs/31857 From crimsun at fungus.sh.nu Mon Apr 24 01:38:29 2006 From: crimsun at fungus.sh.nu (Daniel T. Chen) Date: Mon, 24 Apr 2006 01:38:29 -0000 Subject: [Bug 39517] Re: Inaudible sound on Lenovo 3000 N100-07684JU References: <20060414005338.1627.82345.malonedeb@gangotri.ubuntu.com> Message-ID: <20060424013829.17670.86095.launchpad@gandwana.ubuntu.com> ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Fix Committed => Fix Released -- Inaudible sound on Lenovo 3000 N100-07684JU https://launchpad.net/bugs/39517 From crimsun at fungus.sh.nu Mon Apr 24 01:39:03 2006 From: crimsun at fungus.sh.nu (Daniel T. Chen) Date: Mon, 24 Apr 2006 01:39:03 -0000 Subject: [Bug 39185] Re: M-Audio Delta 1010LT SPDIF output does not work. References: <20060411193018.32313.43105.malonedeb@gandwana.ubuntu.com> Message-ID: <20060424013903.17643.68270.launchpad@gandwana.ubuntu.com> ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Fix Committed => Fix Released -- M-Audio Delta 1010LT SPDIF output does not work. https://launchpad.net/bugs/39185 From punkrockguy318 at comcast.net Mon Apr 24 01:35:54 2006 From: punkrockguy318 at comcast.net (Lukas Sabota) Date: Mon, 24 Apr 2006 01:35:54 -0000 Subject: [Bug 37243] Re: Will not resume from hibernation or sleep References: <20060329230445.7863.72248.malonedeb@gangotri.ubuntu.com> Message-ID: <20060424013554.17670.17906.malone@gandwana.ubuntu.com> Tried the -21 kernel. A little bit different results. When i use sleep, the computer will go to sleep. I can push a button, and it will try to wake up. The computer will start up again, but there will be no signal to my monitor. It will then hang and I must do a hard reboot. When I hibernate, it will turn off as expected. When I turn the power back on, everything boots as normal (into GDM) rather than back into my previous state. -- Will not resume from hibernation or sleep https://launchpad.net/bugs/37243 From autocrosser at macdialup.com Mon Apr 24 01:39:48 2006 From: autocrosser at macdialup.com (Dean Loros) Date: Mon, 24 Apr 2006 01:39:48 -0000 Subject: [Bug 29420] Re: Strange clock behaviour on powerpc-smp References: <20060123071446.16602.91711.malonedeb@gandwana.ubuntu.com> Message-ID: <20060424013948.17643.29818.malone@gandwana.ubuntu.com> Just tried the "new" 15-21 SMP kernel--no change--still having the same issues as before--crashed Gnome-panel several times--screensaver starts at random--rebooted four times, each time the problem got worse-- date/time changes became more pronounced. The single processor kernel with the same number is stable. -- Strange clock behaviour on powerpc-smp https://launchpad.net/bugs/29420 From reti at csail.mit.edu Mon Apr 24 02:47:20 2006 From: reti at csail.mit.edu (KalmanReti) Date: Mon, 24 Apr 2006 02:47:20 -0000 Subject: [Bug 28791] Re: With the new kernel my Powerbook G3 don't boot with bootx References: <20060117153955.20157.15011.malonedeb@gandwana.ubuntu.com> Message-ID: <20060424024720.17670.73645.malone@gandwana.ubuntu.com> I tried booting Dapper flight 6 livecd on my beige G3 (which boots the Breezy livecd with no problems) using BootX and experienced the same symptom. Presumably the kernel is failing very early before it has switched video modes, so the screen still has the bits left over when BootX transferred to the kernel. Anyone have any idea how to go about debugging this? -- With the new kernel my Powerbook G3 don't boot with bootx https://launchpad.net/bugs/28791 From crimsun at fungus.sh.nu Mon Apr 24 03:48:05 2006 From: crimsun at fungus.sh.nu (Daniel T. Chen) Date: Mon, 24 Apr 2006 03:48:05 -0000 Subject: [Bug 40996] Re: DapperDrake Beta (April 20 release) install: DapperDrake fails to detect Creative Labs SB Audigy LS References: <20060423222810.4110.97833.malonedeb@gangotri.ubuntu.com> Message-ID: <20060424034806.4079.76883.malone@gangotri.ubuntu.com> In the future, please attach (don't comment inline) huge pastes, thanks. :) What type of Audigy LS is it (pci/usb)? What does ``lspci -nv'' report regarding the Audigy LS when you boot into Mandriva? ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Unconfirmed => Needs Info -- DapperDrake Beta (April 20 release) install: DapperDrake fails to detect Creative Labs SB Audigy LS https://launchpad.net/bugs/40996 From crimsun at fungus.sh.nu Mon Apr 24 03:50:09 2006 From: crimsun at fungus.sh.nu (Daniel T. Chen) Date: Mon, 24 Apr 2006 03:50:09 -0000 Subject: [Bug 40998] Re: ati x1400 References: <20060423225444.4079.41877.malonedeb@gangotri.ubuntu.com> Message-ID: <20060424035009.17643.18453.malone@gandwana.ubuntu.com> No, Flight 6 is older than Beta. The necessary packages were just released today (Sunday), so you'll need to test tomorrow's daily iso. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Unconfirmed => Needs Info -- ati x1400 https://launchpad.net/bugs/40998 From julian_yap at yahoo.com Mon Apr 24 03:51:34 2006 From: julian_yap at yahoo.com (Julian Yap) Date: Mon, 24 Apr 2006 03:51:34 -0000 Subject: [Bug 30557] Re: cpu idle time in /proc/stat wrong References: <20060205141542.11709.55517.malonedeb@gandwana.ubuntu.com> Message-ID: <20060424035134.17670.2920.malone@gandwana.ubuntu.com> Further testing with the 386 kernel suggests to me that "running the -386 kernel makes everything run ok again. BenC suggests on irc that it's a SMP issue as that's all that's really different between -386 and -686." I am now running the stock 386 kernel and it is a lot more CPU friendly: julian at jubuntu:~$ uname -a Linux jubuntu 2.6.15-21-386 #1 PREEMPT Fri Apr 21 16:43:33 UTC 2006 i686 GNU/Linux So yes. I agree, it's a SMP issue. I have since reverted my /sys/module/processor/parameters/max_cstate to the previous value of 8. Is there any reason why the 686 kernel is a SMP one? -- cpu idle time in /proc/stat wrong https://launchpad.net/bugs/30557 From crimsun at fungus.sh.nu Mon Apr 24 03:55:18 2006 From: crimsun at fungus.sh.nu (Daniel T. Chen) Date: Mon, 24 Apr 2006 03:55:18 -0000 Subject: [Bug 41015] Re: [ALSA] Master volume control doesn't control Headphone control References: <20060424004108.4110.947.malonedeb@gangotri.ubuntu.com> Message-ID: <20060424035518.4079.24877.malone@gangotri.ubuntu.com> Please log out of GNOME and perform the following while logged in from a console. 1) Unload the snd_intel8x0 driver: sudo modprobe -r snd_intel8x0 2) Reload the snd_intel8x0 driver: sudo modprobe snd_intel8x0 ac97_quirk=hp_only Please report whether passing the ac97_quirk=hp_only parameter to modprobe allows you to control the volume of the headphone jack properly. Morever, please attach (don't comment inline) the output from ``lspci -nv''. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Unconfirmed => Needs Info -- [ALSA] Master volume control doesn't control Headphone control https://launchpad.net/bugs/41015 From dr.frog at shaw.ca Mon Apr 24 04:04:36 2006 From: dr.frog at shaw.ca (dr frog) Date: Mon, 24 Apr 2006 04:04:36 -0000 Subject: [Bug 40998] Re: ati x1400 References: <20060423225444.4079.41877.malonedeb@gangotri.ubuntu.com> Message-ID: <20060424040436.4110.78160.malone@gangotri.ubuntu.com> ok im looking forward to getting that and trying it :D -- ati x1400 https://launchpad.net/bugs/40998 From ryan.sammartino at gmail.com Mon Apr 24 04:36:14 2006 From: ryan.sammartino at gmail.com (Ryan T. Sammartino) Date: Mon, 24 Apr 2006 04:36:14 -0000 Subject: [Bug 40996] Re: DapperDrake Beta (April 20 release) install: DapperDrake fails to detect Creative Labs SB Audigy LS References: <20060423222810.4110.97833.malonedeb@gangotri.ubuntu.com> Message-ID: <20060424043614.17670.54561.malone@gandwana.ubuntu.com> When I added "pci=noacpi" to my kernel command line, everything started working. However, I never needed such a thing under Mandriva, nor would I expect a newcomer to Linux to have figured that out. So we can either: - reject this bug - figure out why "pci=noacpi" was needed in Dapper where it wasn't needed for Mandriva. Cheers -- DapperDrake Beta (April 20 release) install: DapperDrake fails to detect Creative Labs SB Audigy LS https://launchpad.net/bugs/40996 From ryan.sammartino at gmail.com Mon Apr 24 04:37:29 2006 From: ryan.sammartino at gmail.com (Ryan T. Sammartino) Date: Mon, 24 Apr 2006 04:37:29 -0000 Subject: [Bug 40994] Re: DapperDrake Beta (April 20 release) install: DapperDrake fails to detect DECchip 21140 ethernet card References: <20060423222059.17643.87697.malonedeb@gandwana.ubuntu.com> Message-ID: <20060424043729.17643.23806.malone@gandwana.ubuntu.com> When I added "pci=noacpi" to my kernel command line, everything started working. However, I never needed such a thing under Mandriva, nor would I expect a newcomer to Linux to have figured that out. So we can either: - reject this bug - figure out why "pci=noacpi" was needed in Dapper where it wasn't needed for Mandriva. Cheers -- DapperDrake Beta (April 20 release) install: DapperDrake fails to detect DECchip 21140 ethernet card https://launchpad.net/bugs/40994 From vetsel.patrice at wanadoo.fr Mon Apr 24 05:12:07 2006 From: vetsel.patrice at wanadoo.fr (VETSEL Patrice) Date: Mon, 24 Apr 2006 05:12:07 -0000 Subject: [Bug 38278] Re: wifi card don't work. isl3886 is required but not installed References: <20060405203926.24486.7083.malonedeb@gangotri.ubuntu.com> Message-ID: <20060424051207.4079.39252.malone@gangotri.ubuntu.com> Linux 2.6.15-21 resolve that bug. Thanks ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Fix Committed => Fix Released -- wifi card don't work. isl3886 is required but not installed https://launchpad.net/bugs/38278 From crimsun at fungus.sh.nu Mon Apr 24 05:17:15 2006 From: crimsun at fungus.sh.nu (Daniel T. Chen) Date: Mon, 24 Apr 2006 05:17:15 -0000 Subject: [Bug 40996] Re: DapperDrake Beta (April 20 release) install: DapperDrake fails to detect Creative Labs SB Audigy LS References: <20060423222810.4110.97833.malonedeb@gangotri.ubuntu.com> Message-ID: <20060424051715.17670.49822.malone@gandwana.ubuntu.com> Please attempt to reproduce the symptom(s) on current Dapper (using 2.6.15-21.32). If it(they) remain, we'll need to add your motherboard to the acpi blacklist. -- DapperDrake Beta (April 20 release) install: DapperDrake fails to detect Creative Labs SB Audigy LS https://launchpad.net/bugs/40996 From sean at compusmith.biz Mon Apr 24 05:31:47 2006 From: sean at compusmith.biz (Sean Smith) Date: Mon, 24 Apr 2006 05:31:47 -0000 Subject: [Bug 39824] Re: Install for Dapper Drake Flight 6 Fails Miserably References: <20060417005245.16443.77994.malonedeb@gandwana.ubuntu.com> Message-ID: <20060424053147.17643.68417.malone@gandwana.ubuntu.com> sean at honeypot:~$ sudo dmidecode Password: # dmidecode 2.7 SMBIOS 2.2 present. 34 structures occupying 886 bytes. Table at 0x000F0800. Handle 0x0000, DMI type 0, 19 bytes. BIOS Information Vendor: Phoenix Technologies, LTD Version: 6.00 PG Release Date: 12/08/2003 Address: 0xE0000 Runtime Size: 128 kB ROM Size: 256 kB Characteristics: ISA is supported PCI is supported PNP is supported APM is supported BIOS is upgradeable BIOS shadowing is allowed ESCD support is available Boot from CD is supported Selectable boot is supported BIOS ROM is socketed EDD is supported 5.25"/360 KB floppy services are supported (int 13h) 5.25"/1.2 MB floppy services are supported (int 13h) 3.5"/720 KB floppy services are supported (int 13h) 3.5"/2.88 MB floppy services are supported (int 13h) Print screen service is supported (int 5h) 8042 keyboard services are supported (int 9h) Serial services are supported (int 14h) Printer services are supported (int 17h) CGA/mono video services are supported (int 10h) ACPI is supported USB legacy is supported AGP is supported LS-120 boot is supported ATAPI Zip drive boot is supported Handle 0x0001, DMI type 1, 25 bytes. System Information Manufacturer: VIA Technologies, Inc. Product Name: KM266-8235 Version: Serial Number: UUID: 1297F641-FFFF-FFFF-FFFF-FFFFFFFFFFFF Wake-up Type: Power Switch Handle 0x0002, DMI type 2, 8 bytes. Base Board Information Manufacturer: Shuttle Inc Product Name: Fx41 Version: Serial Number: Handle 0x0003, DMI type 3, 13 bytes. Chassis Information Manufacturer: Type: Desktop Lock: Not Present Version: Serial Number: Asset Tag: Boot-up State: Unknown Power Supply State: Unknown Thermal State: Unknown Security Status: Unknown Handle 0x0004, DMI type 4, 32 bytes. Processor Information Socket Designation: Socket A Type: Central Processor Family: Duron Manufacturer: AMD ID: 81 06 00 00 FF FB 83 03 Signature: Family 6, Model 8, Stepping 1 Flags: FPU (Floating-point unit on-chip) VME (Virtual mode extension) DE (Debugging extension) PSE (Page size extension) TSC (Time stamp counter) MSR (Model specific registers) PAE (Physical address extension) MCE (Machine check exception) CX8 (CMPXCHG8 instruction supported) APIC (On-chip APIC hardware supported) SEP (Fast system call) MTRR (Memory type range registers) PGE (Page global enable) MCA (Machine check architecture) CMOV (Conditional move instruction supported) PAT (Page attribute table) PSE-36 (36-bit page size extension) MMX (MMX technology supported) FXSR (Fast floating-point save and restore) SSE (Streaming SIMD extensions) Version: AMD Duron(tm) Voltage: 3.3 V External Clock: 133 MHz Max Speed: 1500 MHz Current Speed: 1600 MHz Status: Populated, Enabled Upgrade: ZIF Socket L1 Cache Handle: 0x0008 L2 Cache Handle: 0x0009 L3 Cache Handle: No L3 Cache Handle 0x0005, DMI type 5, 20 bytes. Memory Controller Information Error Detecting Method: None Error Correcting Capabilities: None Supported Interleave: One-way Interleave Current Interleave: Four-way Interleave Maximum Memory Module Size: 32 MB Maximum Total Memory Size: 64 MB Supported Speeds: 70 ns 60 ns Supported Memory Types: Standard EDO Memory Module Voltage: 5.0 V Associated Memory Slots: 2 0x0006 0x0007 Enabled Error Correcting Capabilities: None Handle 0x0006, DMI type 6, 12 bytes. Memory Module Information Socket Designation: A0 Bank Connections: 0 1 Current Speed: 60 ns Type: Other SDRAM Installed Size: 512 MB (Double-bank Connection) Enabled Size: 512 MB (Double-bank Connection) Error Status: OK Handle 0x0007, DMI type 6, 12 bytes. Memory Module Information Socket Designation: A1 Bank Connections: 2 3 Current Speed: 60 ns Type: Other SDRAM Installed Size: 256 MB (Double-bank Connection) Enabled Size: 256 MB (Double-bank Connection) Error Status: OK Handle 0x0008, DMI type 7, 19 bytes. Cache Information Socket Designation: Internal Cache Configuration: Enabled, Not Socketed, Level 1 Operational Mode: Write Back Location: Internal Installed Size: 128 KB Maximum Size: 128 KB Supported SRAM Types: Synchronous Installed SRAM Type: Synchronous Speed: Unknown Error Correction Type: Unknown System Type: Unknown Associativity: Unknown Handle 0x0009, DMI type 7, 19 bytes. Cache Information Socket Designation: External Cache Configuration: Enabled, Not Socketed, Level 2 Operational Mode: Write Back Location: External Installed Size: 64 KB Maximum Size: 64 KB Supported SRAM Types: Synchronous Installed SRAM Type: Synchronous Speed: Unknown Error Correction Type: Unknown System Type: Unknown Associativity: Unknown Handle 0x000A, DMI type 8, 9 bytes. Port Connector Information Internal Reference Designator: PRIMARY IDE Internal Connector Type: On Board IDE External Reference Designator: Not Specified External Connector Type: None Port Type: Other Handle 0x000B, DMI type 8, 9 bytes. Port Connector Information Internal Reference Designator: SECONDARY IDE Internal Connector Type: On Board IDE External Reference Designator: Not Specified External Connector Type: None Port Type: Other Handle 0x000C, DMI type 8, 9 bytes. Port Connector Information Internal Reference Designator: FDD Internal Connector Type: On Board Floppy External Reference Designator: Not Specified External Connector Type: None Port Type: 8251 FIFO Compatible Handle 0x000D, DMI type 8, 9 bytes. Port Connector Information Internal Reference Designator: COM1 Internal Connector Type: 9 Pin Dual Inline (pin 10 cut) External Reference Designator: External Connector Type: DB-9 male Port Type: Serial Port 16450 Compatible Handle 0x000E, DMI type 8, 9 bytes. Port Connector Information Internal Reference Designator: COM2 Internal Connector Type: 9 Pin Dual Inline (pin 10 cut) External Reference Designator: External Connector Type: DB-9 male Port Type: Serial Port 16450 Compatible Handle 0x000F, DMI type 8, 9 bytes. Port Connector Information Internal Reference Designator: LPT1 Internal Connector Type: DB-25 female External Reference Designator: External Connector Type: DB-25 female Port Type: Parallel Port ECP/EPP Handle 0x0010, DMI type 8, 9 bytes. Port Connector Information Internal Reference Designator: Keyboard Internal Connector Type: PS/2 External Reference Designator: External Connector Type: PS/2 Port Type: Keyboard Port Handle 0x0011, DMI type 8, 9 bytes. Port Connector Information Internal Reference Designator: PS/2 Mouse Internal Connector Type: PS/2 External Reference Designator: External Connector Type: PS/2 Port Type: Mouse Port Handle 0x0012, DMI type 8, 9 bytes. Port Connector Information Internal Reference Designator: Not Specified Internal Connector Type: None External Reference Designator: USB External Connector Type: Other Port Type: USB Handle 0x0013, DMI type 8, 9 bytes. Port Connector Information Internal Reference Designator: Not Specified Internal Connector Type: None External Reference Designator: AUDIO External Connector Type: None Port Type: Audio Port Handle 0x0014, DMI type 9, 13 bytes. System Slot Information Designation: PCI0 Type: 32-bit PCI Current Usage: Available Length: Long ID: 1 Characteristics: 5.0 V is provided PME signal is supported Handle 0x0015, DMI type 9, 13 bytes. System Slot Information Designation: PCI1 Type: 32-bit PCI Current Usage: In Use Length: Long ID: 2 Characteristics: 5.0 V is provided PME signal is supported Handle 0x0016, DMI type 9, 13 bytes. System Slot Information Designation: PCI2 Type: 32-bit PCI Current Usage: In Use Length: Long ID: 3 Characteristics: 5.0 V is provided PME signal is supported Handle 0x0017, DMI type 9, 13 bytes. System Slot Information Designation: PCI3 Type: 32-bit PCI Current Usage: Available Length: Long ID: 4 Characteristics: 5.0 V is provided PME signal is supported Handle 0x0018, DMI type 9, 13 bytes. System Slot Information Designation: AGP Type: 32-bit AGP Current Usage: Available Length: Long ID: 8 Characteristics: 5.0 V is provided Handle 0x0019, DMI type 13, 22 bytes. BIOS Language Information Installable Languages: 3 n|US|iso8859-1 n|US|iso8859-1 r|CA|iso8859-1 Currently Installed Language: n|US|iso8859-1 Handle 0x001A, DMI type 16, 15 bytes. Physical Memory Array Location: System Board Or Motherboard Use: System Memory Error Correction Type: None Maximum Capacity: 512 MB Error Information Handle: Not Provided Number Of Devices: 2 Handle 0x001B, DMI type 17, 21 bytes. Memory Device Array Handle: 0x001A Error Information Handle: Not Provided Total Width: Unknown Data Width: Unknown Size: 512 MB Form Factor: DIMM Set: None Locator: A0 Bank Locator: Bank0/1 Type: Unknown Type Detail: None Handle 0x001C, DMI type 17, 21 bytes. Memory Device Array Handle: 0x001A Error Information Handle: Not Provided Total Width: Unknown Data Width: Unknown Size: 256 MB Form Factor: DIMM Set: None Locator: A1 Bank Locator: Bank2/3 Type: Unknown Type Detail: None Handle 0x001D, DMI type 19, 15 bytes. Memory Array Mapped Address Starting Address: 0x00000000000 Ending Address: 0x0002FFFFFFF Range Size: 768 MB Physical Array Handle: 0x001A Partition Width: 0 Handle 0x001E, DMI type 20, 19 bytes. Memory Device Mapped Address Starting Address: 0x00000000000 Ending Address: 0x0001FFFFFFF Range Size: 512 MB Physical Device Handle: 0x001B Memory Array Mapped Address Handle: 0x001D Partition Row Position: 1 Handle 0x001F, DMI type 20, 19 bytes. Memory Device Mapped Address Starting Address: 0x00020000000 Ending Address: 0x0002FFFFFFF Range Size: 256 MB Physical Device Handle: 0x001C Memory Array Mapped Address Handle: 0x001D Partition Row Position: 1 Handle 0x0020, DMI type 32, 11 bytes. System Boot Information Status: No errors detected Handle 0x0021, DMI type 127, 4 bytes. End Of Table -- Install for Dapper Drake Flight 6 Fails Miserably https://launchpad.net/bugs/39824 From sean at compusmith.biz Mon Apr 24 05:30:47 2006 From: sean at compusmith.biz (Sean Smith) Date: Mon, 24 Apr 2006 05:30:47 -0000 Subject: [Bug 39824] Re: [Bug 39824] Re: Install for Dapper Drake Flight 6 Fails Miserably References: <20060417005245.16443.77994.malonedeb@gandwana.ubuntu.com> <20060423145051.17643.32619.malone@gandwana.ubuntu.com> Message-ID: <1145856648.7682.0.camel@honeypot> Greetings, The following is my output from dmidecode. I will post it on the Launchpad bug tracker as well. Regards, - Sean Smith - sean at honeypot:~$ sudo dmidecode Password: # dmidecode 2.7 SMBIOS 2.2 present. 34 structures occupying 886 bytes. Table at 0x000F0800. Handle 0x0000, DMI type 0, 19 bytes. BIOS Information Vendor: Phoenix Technologies, LTD Version: 6.00 PG Release Date: 12/08/2003 Address: 0xE0000 Runtime Size: 128 kB ROM Size: 256 kB Characteristics: ISA is supported PCI is supported PNP is supported APM is supported BIOS is upgradeable BIOS shadowing is allowed ESCD support is available Boot from CD is supported Selectable boot is supported BIOS ROM is socketed EDD is supported 5.25"/360 KB floppy services are supported (int 13h) 5.25"/1.2 MB floppy services are supported (int 13h) 3.5"/720 KB floppy services are supported (int 13h) 3.5"/2.88 MB floppy services are supported (int 13h) Print screen service is supported (int 5h) 8042 keyboard services are supported (int 9h) Serial services are supported (int 14h) Printer services are supported (int 17h) CGA/mono video services are supported (int 10h) ACPI is supported USB legacy is supported AGP is supported LS-120 boot is supported ATAPI Zip drive boot is supported Handle 0x0001, DMI type 1, 25 bytes. System Information Manufacturer: VIA Technologies, Inc. Product Name: KM266-8235 Version: Serial Number: UUID: 1297F641-FFFF-FFFF-FFFF-FFFFFFFFFFFF Wake-up Type: Power Switch Handle 0x0002, DMI type 2, 8 bytes. Base Board Information Manufacturer: Shuttle Inc Product Name: Fx41 Version: Serial Number: Handle 0x0003, DMI type 3, 13 bytes. Chassis Information Manufacturer: Type: Desktop Lock: Not Present Version: Serial Number: Asset Tag: Boot-up State: Unknown Power Supply State: Unknown Thermal State: Unknown Security Status: Unknown Handle 0x0004, DMI type 4, 32 bytes. Processor Information Socket Designation: Socket A Type: Central Processor Family: Duron Manufacturer: AMD ID: 81 06 00 00 FF FB 83 03 Signature: Family 6, Model 8, Stepping 1 Flags: FPU (Floating-point unit on-chip) VME (Virtual mode extension) DE (Debugging extension) PSE (Page size extension) TSC (Time stamp counter) MSR (Model specific registers) PAE (Physical address extension) MCE (Machine check exception) CX8 (CMPXCHG8 instruction supported) APIC (On-chip APIC hardware supported) SEP (Fast system call) MTRR (Memory type range registers) PGE (Page global enable) MCA (Machine check architecture) CMOV (Conditional move instruction supported) PAT (Page attribute table) PSE-36 (36-bit page size extension) MMX (MMX technology supported) FXSR (Fast floating-point save and restore) SSE (Streaming SIMD extensions) Version: AMD Duron(tm) Voltage: 3.3 V External Clock: 133 MHz Max Speed: 1500 MHz Current Speed: 1600 MHz Status: Populated, Enabled Upgrade: ZIF Socket L1 Cache Handle: 0x0008 L2 Cache Handle: 0x0009 L3 Cache Handle: No L3 Cache Handle 0x0005, DMI type 5, 20 bytes. Memory Controller Information Error Detecting Method: None Error Correcting Capabilities: None Supported Interleave: One-way Interleave Current Interleave: Four-way Interleave Maximum Memory Module Size: 32 MB Maximum Total Memory Size: 64 MB Supported Speeds: 70 ns 60 ns Supported Memory Types: Standard EDO Memory Module Voltage: 5.0 V Associated Memory Slots: 2 0x0006 0x0007 Enabled Error Correcting Capabilities: None Handle 0x0006, DMI type 6, 12 bytes. Memory Module Information Socket Designation: A0 Bank Connections: 0 1 Current Speed: 60 ns Type: Other SDRAM Installed Size: 512 MB (Double-bank Connection) Enabled Size: 512 MB (Double-bank Connection) Error Status: OK Handle 0x0007, DMI type 6, 12 bytes. Memory Module Information Socket Designation: A1 Bank Connections: 2 3 Current Speed: 60 ns Type: Other SDRAM Installed Size: 256 MB (Double-bank Connection) Enabled Size: 256 MB (Double-bank Connection) Error Status: OK Handle 0x0008, DMI type 7, 19 bytes. Cache Information Socket Designation: Internal Cache Configuration: Enabled, Not Socketed, Level 1 Operational Mode: Write Back Location: Internal Installed Size: 128 KB Maximum Size: 128 KB Supported SRAM Types: Synchronous Installed SRAM Type: Synchronous Speed: Unknown Error Correction Type: Unknown System Type: Unknown Associativity: Unknown Handle 0x0009, DMI type 7, 19 bytes. Cache Information Socket Designation: External Cache Configuration: Enabled, Not Socketed, Level 2 Operational Mode: Write Back Location: External Installed Size: 64 KB Maximum Size: 64 KB Supported SRAM Types: Synchronous Installed SRAM Type: Synchronous Speed: Unknown Error Correction Type: Unknown System Type: Unknown Associativity: Unknown Handle 0x000A, DMI type 8, 9 bytes. Port Connector Information Internal Reference Designator: PRIMARY IDE Internal Connector Type: On Board IDE External Reference Designator: Not Specified External Connector Type: None Port Type: Other Handle 0x000B, DMI type 8, 9 bytes. Port Connector Information Internal Reference Designator: SECONDARY IDE Internal Connector Type: On Board IDE External Reference Designator: Not Specified External Connector Type: None Port Type: Other Handle 0x000C, DMI type 8, 9 bytes. Port Connector Information Internal Reference Designator: FDD Internal Connector Type: On Board Floppy External Reference Designator: Not Specified External Connector Type: None Port Type: 8251 FIFO Compatible Handle 0x000D, DMI type 8, 9 bytes. Port Connector Information Internal Reference Designator: COM1 Internal Connector Type: 9 Pin Dual Inline (pin 10 cut) External Reference Designator: External Connector Type: DB-9 male Port Type: Serial Port 16450 Compatible Handle 0x000E, DMI type 8, 9 bytes. Port Connector Information Internal Reference Designator: COM2 Internal Connector Type: 9 Pin Dual Inline (pin 10 cut) External Reference Designator: External Connector Type: DB-9 male Port Type: Serial Port 16450 Compatible Handle 0x000F, DMI type 8, 9 bytes. Port Connector Information Internal Reference Designator: LPT1 Internal Connector Type: DB-25 female External Reference Designator: External Connector Type: DB-25 female Port Type: Parallel Port ECP/EPP Handle 0x0010, DMI type 8, 9 bytes. Port Connector Information Internal Reference Designator: Keyboard Internal Connector Type: PS/2 External Reference Designator: External Connector Type: PS/2 Port Type: Keyboard Port Handle 0x0011, DMI type 8, 9 bytes. Port Connector Information Internal Reference Designator: PS/2 Mouse Internal Connector Type: PS/2 External Reference Designator: External Connector Type: PS/2 Port Type: Mouse Port Handle 0x0012, DMI type 8, 9 bytes. Port Connector Information Internal Reference Designator: Not Specified Internal Connector Type: None External Reference Designator: USB External Connector Type: Other Port Type: USB Handle 0x0013, DMI type 8, 9 bytes. Port Connector Information Internal Reference Designator: Not Specified Internal Connector Type: None External Reference Designator: AUDIO External Connector Type: None Port Type: Audio Port Handle 0x0014, DMI type 9, 13 bytes. System Slot Information Designation: PCI0 Type: 32-bit PCI Current Usage: Available Length: Long ID: 1 Characteristics: 5.0 V is provided PME signal is supported Handle 0x0015, DMI type 9, 13 bytes. System Slot Information Designation: PCI1 Type: 32-bit PCI Current Usage: In Use Length: Long ID: 2 Characteristics: 5.0 V is provided PME signal is supported Handle 0x0016, DMI type 9, 13 bytes. System Slot Information Designation: PCI2 Type: 32-bit PCI Current Usage: In Use Length: Long ID: 3 Characteristics: 5.0 V is provided PME signal is supported Handle 0x0017, DMI type 9, 13 bytes. System Slot Information Designation: PCI3 Type: 32-bit PCI Current Usage: Available Length: Long ID: 4 Characteristics: 5.0 V is provided PME signal is supported Handle 0x0018, DMI type 9, 13 bytes. System Slot Information Designation: AGP Type: 32-bit AGP Current Usage: Available Length: Long ID: 8 Characteristics: 5.0 V is provided Handle 0x0019, DMI type 13, 22 bytes. BIOS Language Information Installable Languages: 3 n|US|iso8859-1 n|US|iso8859-1 r|CA|iso8859-1 Currently Installed Language: n|US|iso8859-1 Handle 0x001A, DMI type 16, 15 bytes. Physical Memory Array Location: System Board Or Motherboard Use: System Memory Error Correction Type: None Maximum Capacity: 512 MB Error Information Handle: Not Provided Number Of Devices: 2 Handle 0x001B, DMI type 17, 21 bytes. Memory Device Array Handle: 0x001A Error Information Handle: Not Provided Total Width: Unknown Data Width: Unknown Size: 512 MB Form Factor: DIMM Set: None Locator: A0 Bank Locator: Bank0/1 Type: Unknown Type Detail: None Handle 0x001C, DMI type 17, 21 bytes. Memory Device Array Handle: 0x001A Error Information Handle: Not Provided Total Width: Unknown Data Width: Unknown Size: 256 MB Form Factor: DIMM Set: None Locator: A1 Bank Locator: Bank2/3 Type: Unknown Type Detail: None Handle 0x001D, DMI type 19, 15 bytes. Memory Array Mapped Address Starting Address: 0x00000000000 Ending Address: 0x0002FFFFFFF Range Size: 768 MB Physical Array Handle: 0x001A Partition Width: 0 Handle 0x001E, DMI type 20, 19 bytes. Memory Device Mapped Address Starting Address: 0x00000000000 Ending Address: 0x0001FFFFFFF Range Size: 512 MB Physical Device Handle: 0x001B Memory Array Mapped Address Handle: 0x001D Partition Row Position: 1 Handle 0x001F, DMI type 20, 19 bytes. Memory Device Mapped Address Starting Address: 0x00020000000 Ending Address: 0x0002FFFFFFF Range Size: 256 MB Physical Device Handle: 0x001C Memory Array Mapped Address Handle: 0x001D Partition Row Position: 1 Handle 0x0020, DMI type 32, 11 bytes. System Boot Information Status: No errors detected Handle 0x0021, DMI type 127, 4 bytes. End Of Table On Sun, 2006-04-23 at 14:50 +0000, sam tygier wrote: > can you post the output of > dmidecode > > ** Changed in: Ubuntu > Sourcepackagename: None => linux-source-2.6.15 > Status: Unconfirmed => Needs Info > -- Install for Dapper Drake Flight 6 Fails Miserably https://launchpad.net/bugs/39824 From agblazquez at telefonica.net Mon Apr 24 06:10:09 2006 From: agblazquez at telefonica.net (=?utf-8?q?Adolfo_Gonz=C3=A1lez_Bl=C3=A1zquez?=) Date: Mon, 24 Apr 2006 06:10:09 -0000 Subject: [Bug 41015] Re: [ALSA] Master volume control doesn't control Headphone control References: <20060424004108.4110.947.malonedeb@gangotri.ubuntu.com> Message-ID: <20060424061009.4110.45115.malone@gangotri.ubuntu.com> The hp_quirk thing did the trick. Passing that option to the module reverted the mixer to the previous and good state. Now Volume Master controls the headphone level when headphones are connected. Attached lspci -vn. Thanks! ** Attachment added: "lspci -vn (hp nx8220)" http://librarian.launchpad.net/2319203/lspci_hpnx8220.txt -- [ALSA] Master volume control doesn't control Headphone control https://launchpad.net/bugs/41015 From rlaager at users.sf.net Mon Apr 24 06:18:08 2006 From: rlaager at users.sf.net (Richard Laager) Date: Mon, 24 Apr 2006 06:18:08 -0000 Subject: [Bug 35215] Re: ipw3945 driver required for functionality on new Intel PRO/Wireless 3945ABG Mini-PCI Express Adapters References: <20060316173707.11105.89035.malonedeb@gandwana.ubuntu.com> Message-ID: <20060424061808.17670.98846.malone@gandwana.ubuntu.com> I'm seeing the same errors. Running strings on ieee80211.ko doesn't show anything that includes 1_1_13. I tried rebuilding ieee80211 from the ieee80211-source package, but that didn't work either. -- ipw3945 driver required for functionality on new Intel PRO/Wireless 3945ABG Mini-PCI Express Adapters https://launchpad.net/bugs/35215 From linux at strigen.com Mon Apr 24 06:35:18 2006 From: linux at strigen.com (Tor Harald Thorland) Date: Mon, 24 Apr 2006 06:35:18 -0000 Subject: [Bug 31351] Re: Epson Stylus CX 6400 Not Working in Dapper References: <20060213220313.1498.92763.malonedeb@gangotri.ubuntu.com> Message-ID: <20060424063518.4079.57076.malone@gangotri.ubuntu.com> It's working now, Thanks a lot!!! ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Unconfirmed => Fix Released -- Epson Stylus CX 6400 Not Working in Dapper https://launchpad.net/bugs/31351 From jani at ubuntu.com Mon Apr 24 06:50:20 2006 From: jani at ubuntu.com (Jani Monoses) Date: Mon, 24 Apr 2006 06:50:20 -0000 Subject: [Bug 34066] Re: usb mouse dead on resume References: <20060308112717.14318.84205.malonedeb@gangotri.ubuntu.com> Message-ID: <20060424065020.4079.48474.malone@gangotri.ubuntu.com> still present with 2.6.15-21.32. Sometimes the mouse works even after several suspend/resume cycles, but once it does not, further suspend/resumes do not seem to work either. And it seems to depend on which usb slot it is put in (one of two on the same UHCI bus), as if changing its slot when the system is running affects subsequent suspend/resume. -- usb mouse dead on resume https://launchpad.net/bugs/34066 From yoop at bballizlife.com Mon Apr 24 07:13:39 2006 From: yoop at bballizlife.com (Loic Mathaud) Date: Mon, 24 Apr 2006 07:13:39 -0000 Subject: [Bug 34752] Re: [atmel] breezy->dapper wifi lost: signal power to 0 References: <20060313122743.17044.67675.malonedeb@gangotri.ubuntu.com> Message-ID: <20060424071339.4079.51152.malone@gangotri.ubuntu.com> Installed the 2.6.15-21 kernel this morning : wifi still broken with the same trouble. -- [atmel] breezy->dapper wifi lost: signal power to 0 https://launchpad.net/bugs/34752 From greblus at wp.pl Mon Apr 24 08:09:15 2006 From: greblus at wp.pl (Wiktor Grebla) Date: Mon, 24 Apr 2006 08:09:15 -0000 Subject: [Bug 38884] Re: rtl818x - System hangs when uploading files. References: <20060409144601.32233.18688.malonedeb@gandwana.ubuntu.com> Message-ID: <20060424080915.4110.25323.malone@gangotri.ubuntu.com> I was way too optimistic yesterday. It simply took more time to show-up, but it's still there :(. -- rtl818x - System hangs when uploading files. https://launchpad.net/bugs/38884 From mikko.s.saarinen at mbnet.fi Mon Apr 24 08:22:05 2006 From: mikko.s.saarinen at mbnet.fi (Mikko Saarinen) Date: Mon, 24 Apr 2006 08:22:05 -0000 Subject: [Bug 39639] Re: Hibernate, suspend, sleep... clarification needed References: <20060415105835.1627.17573.malonedeb@gangotri.ubuntu.com> Message-ID: <20060424082205.17670.26307.malone@gandwana.ubuntu.com> You can remove this from the buglist. This is an issue only in Finnish translations and I have contacted the group about changing the Finnish terms. -- Hibernate, suspend, sleep... clarification needed https://launchpad.net/bugs/39639 From mikko.s.saarinen at mbnet.fi Mon Apr 24 08:29:00 2006 From: mikko.s.saarinen at mbnet.fi (Mikko Saarinen) Date: Mon, 24 Apr 2006 08:29:00 -0000 Subject: [Bug 35213] Re: hibernate fails when not on AC power on HP Pavilion ZT3000 - regression from breezy References: <20060316170910.6510.54248.malonedeb@gangotri.ubuntu.com> Message-ID: <20060424082900.4110.92207.malone@gangotri.ubuntu.com> This bug still affects my machine (MSI S250), even though the laptop mode is disabled. Yesterday saw a major update and after I restarted the machine this has now happened two times. That is every time I have initiated the hibernation since then =( -- hibernate fails when not on AC power on HP Pavilion ZT3000 - regression from breezy https://launchpad.net/bugs/35213 From mjg59 at codon.org.uk Mon Apr 24 08:31:49 2006 From: mjg59 at codon.org.uk (Matthew Garrett) Date: Mon, 24 Apr 2006 08:31:49 -0000 Subject: [Bug 20320] Re: SD card in laptop reader does not work References: <20060113140643.21012.2265.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060424083149.4079.64205.malone@gangotri.ubuntu.com> Can you test with the latest Dapper kernel? -- SD card in laptop reader does not work https://launchpad.net/bugs/20320 From martijn at foodfight.org Mon Apr 24 08:43:24 2006 From: martijn at foodfight.org (Martijn van de Streek) Date: Mon, 24 Apr 2006 08:43:24 -0000 Subject: [Bug 20320] Re: SD card in laptop reader does not work References: <20060113140643.21012.2265.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060424084324.4079.29665.malone@gangotri.ubuntu.com> It works now. -- SD card in laptop reader does not work https://launchpad.net/bugs/20320 From t.harley at laposte.net Mon Apr 24 09:01:26 2006 From: t.harley at laposte.net (Topper) Date: Mon, 24 Apr 2006 09:01:26 -0000 Subject: [Bug 41061] Boot failure on SCSI disk References: <20060424090127.17643.31977.malonedeb@gandwana.ubuntu.com> Message-ID: <20060424090127.17643.31977.malonedeb@gandwana.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 linux-image-2.6.15-21-k7 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: I'm using Dapper 32bits on amd64x2. My Boot drive is Fujitsu 10k U160 SCSI on Adaptec AHA19160. After the last auto-upgrade from kernel 2.6.15-20-k7 to 2.6.15-21-k7 my system won't boot passed "Uncompressing linux image". If I wait a few minutes it dies with a message like "can't find /dev/sda1" which is my boot drive. Booting back on 2.6.15-20-k7 works just fine. I Found another unlucky person on ubuntuforums with likely the same issue : http://ubuntuforums.org/showthread.php?t=164873 -- Boot failure on SCSI disk https://launchpad.net/bugs/41061 From phibxr at gmail.com Mon Apr 24 09:12:24 2006 From: phibxr at gmail.com (phibxr) Date: Mon, 24 Apr 2006 09:12:24 -0000 Subject: [Bug 34508] Re: 2.6.15 kernel fails to boot on ppc machine References: <20060311210305.30082.75520.malonedeb@gandwana.ubuntu.com> Message-ID: <20060424091224.17670.49797.malone@gandwana.ubuntu.com> Has this bug been fixed yet? I've ran out of discs by burning 15-20 daily builds, still finding the same bug over and over again - and only with Ubuntu Dapper, not Gentoo. :( -- 2.6.15 kernel fails to boot on ppc machine https://launchpad.net/bugs/34508 From angystardust at gmail.com Mon Apr 24 09:32:47 2006 From: angystardust at gmail.com (angystardust) Date: Mon, 24 Apr 2006 09:32:47 -0000 Subject: [Bug 33950] Re: hdaps Y axis inverted References: <20060307013424.9003.68623.malonedeb@gandwana.ubuntu.com> Message-ID: <20060424093247.17670.68972.malone@gandwana.ubuntu.com> Ben, you rock!!! It works great on my X40!!! >From 'dmesg' output: [4295134.177000] hdaps: inverting y-axis readings. [4295134.177000] hdaps: IBM ThinkPad X40 detected. [4295134.179000] hdaps: initial latch check good (0x01). [4295134.985000] hdaps: device successfully initialized. [4295134.986000] input: hdaps as /class/input/input4 [4295134.987000] hdaps: driver successfully loaded. Dagfinn, can you please confirm? However I think it's safe to close this bug! ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Needs Info => Confirmed -- hdaps Y axis inverted https://launchpad.net/bugs/33950 From marcel at wastedworld.net Mon Apr 24 09:37:31 2006 From: marcel at wastedworld.net (Marcel Camijn) Date: Mon, 24 Apr 2006 09:37:31 -0000 Subject: [Bug 28408] Re: Orinoco driver is acting up in Dapper References: <20060113152219.29386.38218.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060424093731.4079.31510.malone@gangotri.ubuntu.com> I had the same problem. I had no problems with the wireless card (dell truemobile - orinico) during installation but the card failed directly at first boot, there were also numerous error mesages in syslog (about 1 per second). I noticed that the hostap and hostap_cs modules were loaded, after blacklisting them and rebooting there were no more error messages, I could set a wep key without errors and got a connection. -- Orinoco driver is acting up in Dapper https://launchpad.net/bugs/28408 From dennis at kaarsemaker.net Mon Apr 24 09:35:29 2006 From: dennis at kaarsemaker.net (Dennis Kaarsemaker) Date: Mon, 24 Apr 2006 09:35:29 -0000 Subject: [Bug 38884] Re: rtl818x - System hangs when uploading files. References: <20060409144601.32233.18688.malonedeb@gandwana.ubuntu.com> Message-ID: <20060424093529.4110.39676.launchpad@gangotri.ubuntu.com> ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Fix Released => Confirmed -- rtl818x - System hangs when uploading files. https://launchpad.net/bugs/38884 From tgrzej10 at gazeta.pl Mon Apr 24 10:08:18 2006 From: tgrzej10 at gazeta.pl (tgrzejsz) Date: Mon, 24 Apr 2006 10:08:18 -0000 Subject: [Bug 41072] "Badness in local_bh_enable" in system log References: <20060424100818.17670.76410.malonedeb@gandwana.ubuntu.com> Message-ID: <20060424100818.17670.76410.malonedeb@gandwana.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 linux-image-2.6.15-20-686 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: I'am using Kubuntu Dapper Drake and while playing with my infrared dongle (STIR4200) I've found the following message in my system log: Apr 23 17:31:11 localhost kernel: [4368842.616000] ircomm_tty_open - got signal while blocking on ASYNC_CLOSING! Apr 23 17:47:04 localhost -- MARK -- Apr 23 17:54:25 localhost kernel: [4370237.148000] Badness in local_bh_enable at kernel/softirq.c:140 Apr 23 17:54:25 localhost kernel: [4370237.148000] [local_bh_enable+123/144] local_bh_enable+0x7b/0x90 Apr 23 17:54:25 localhost kernel: [4370237.148000] [dev_queue_xmit+168/752] dev_queue_xmit+0xa8/0x2f0 Apr 23 17:54:25 localhost kernel: [4370237.148000] [pg0+275740198/1069188096] irlap_send_data_primary_poll+0x1c6/0x220 [irda] Apr 23 17:54:25 localhost kernel: [4370237.148000] [pg0+275725531/1069188096] irlap_state_xmit_p+0x23b/0x2b0 [irda] Apr 23 17:54:25 localhost kernel: [4370237.148000] [pg0+275720302/1069188096] irlap_do_event+0xee/0x1e0 [irda] Apr 23 17:54:25 localhost kernel: [4370237.148000] [pg0+275711939/1069188096] irlap_data_request+0x113/0x1b0 [irda] Apr 23 17:54:25 localhost kernel: [4370237.148000] [pg0+275704278/1069188096] irlmp_state_dtr+0x206/0x360 [irda] Apr 23 17:54:25 localhost kernel: [4370237.148000] [pg0+275690126/1069188096] irlmp_disconnect_request+0x6e/0x2b0 [irda] Apr 23 17:54:25 localhost kernel: [4370237.148000] [pg0+275764255/1069188096] irttp_disconnect_request+0x7f/0x260 [irda] Apr 23 17:54:25 localhost kernel: [4370237.148000] [pg0+278049203/1069188096] __ircomm_close+0x43/0x90 [ircomm] Apr 23 17:54:25 localhost kernel: [4370237.148000] [pg0+277948316/1069188096] ircomm_tty_shutdown+0x10c/0x1a0 [ircomm_tty] Apr 23 17:54:25 localhost kernel: [4370237.148000] [pg0+277945116/1069188096] ircomm_tty_close+0x19c/0x2c0 [ircomm_tty] Apr 23 17:54:25 localhost kernel: [4370237.148000] [tty_fasync+110/272] tty_fasync+0x6e/0x110 Apr 23 17:54:25 localhost kernel: [4370237.148000] [release_dev+355/1904] release_dev+0x163/0x770 Apr 23 17:54:25 localhost kernel: [4370237.148000] [unix_release_sock+251/640] unix_release_sock+0xfb/0x280 Apr 23 17:54:25 localhost kernel: [4370237.148000] [invalidate_inode_buffers+18/112] invalidate_inode_buffers+0x12/0x70 Apr 23 17:54:25 localhost kernel: [4370237.148000] [inotify_dentry_parent_queue_event+82/224] inotify_dentry_parent_queue_event+0x52/0xe0 Apr 23 17:54:25 localhost kernel: [4370237.148000] [dput+243/528] dput+0xf3/0x210 Apr 23 17:54:25 localhost kernel: [4370237.148000] [tty_release+20/32] tty_release+0x14/0x20 Apr 23 17:54:25 localhost kernel: [4370237.148000] [__fput+163/400] __fput+0xa3/0x190 Apr 23 17:54:25 localhost kernel: [4370237.148000] [filp_close+82/144] filp_close+0x52/0x90 Apr 23 17:54:25 localhost kernel: [4370237.148000] [put_files_struct+123/208] put_files_struct+0x7b/0xd0 Apr 23 17:54:25 localhost kernel: [4370237.148000] [do_exit+303/1072] do_exit+0x12f/0x430 Apr 23 17:54:25 localhost kernel: [4370237.148000] [do_group_exit+64/176] do_group_exit+0x40/0xb0 Apr 23 17:54:25 localhost kernel: [4370237.148000] [sysenter_past_esp+84/117] sysenter_past_esp+0x54/0x75 -- "Badness in local_bh_enable" in system log https://launchpad.net/bugs/41072 From dennis at kaarsemaker.net Mon Apr 24 10:11:51 2006 From: dennis at kaarsemaker.net (Dennis Kaarsemaker) Date: Mon, 24 Apr 2006 10:11:51 -0000 Subject: [Bug 39639] Re: [Bug 39639] Re: Hibernate, suspend, sleep... clarification needed References: <20060415105835.1627.17573.malonedeb@gangotri.ubuntu.com> <20060424082205.17670.26307.malone@gandwana.ubuntu.com> Message-ID: <1145873511.15506.7.camel@mirage> OK, thanks for notifying us! status Rejected ** Changed in: Ubuntu Status: Unconfirmed => Rejected -- Hibernate, suspend, sleep... clarification needed https://launchpad.net/bugs/39639 From angystardust at gmail.com Mon Apr 24 10:25:43 2006 From: angystardust at gmail.com (angystardust) Date: Mon, 24 Apr 2006 10:25:43 -0000 Subject: [Bug 29767] Re: IBM Thinkpad X41 suspend to disk unsatisfactory regression References: <20060126124346.26274.53643.malonedeb@gangotri.ubuntu.com> Message-ID: <20060424102543.17670.35216.malone@gandwana.ubuntu.com> I had the same problem before uploading to 2.6.15-21... the last kernel upload (2.6.15-21) fixes many things regarding the ata/ide support... (from the changelog) * libata: Backport of ACPI handling patch. * ide-acpi: Replaces our old IDE ACPI support code with new and shiney stuff that should work better on some hardware. * acpi-osl: Fixes some cases where code could sleep during resume (not allowed, since interrupts are disabled). * acpi: Bad characters shouldn't be fatal. Ben Collins and Matthew Garrett ROCK! Now i can suspend-to-ram and suspend-to-disk again when my x40 is docked!!! please, try again after an 'apt-get dist-upgrade'...so maybe we can finally close this old bug! -- IBM Thinkpad X41 suspend to disk unsatisfactory regression https://launchpad.net/bugs/29767 From ian at snork.net Mon Apr 24 10:37:59 2006 From: ian at snork.net (Ian Chiew) Date: Mon, 24 Apr 2006 10:37:59 -0000 Subject: [Bug 35215] Re: ipw3945 driver required for functionality on new Intel PRO/Wireless 3945ABG Mini-PCI Express Adapters References: <20060316173707.11105.89035.malonedeb@gandwana.ubuntu.com> Message-ID: <20060424103759.4079.68822.malone@gangotri.ubuntu.com> A typo in 2.6.15-21 is preventing the newer ieee802.11 modules from being built. --- linux-source-2.6.15.orig/net/Makefile 2006-04-24 17:35:18.000000000 +1000 +++ linux-source-2.6.15/net/Makefile 2006-04-24 17:35:20.000000000 +1000 @@ -45,7 +45,7 @@ obj-$(CONFIG_IP_DCCP) += dccp/ obj-$(CONFIG_IP_SCTP) += sctp/ obj-$(CONFIG_IEEE80211) += ieee80211/ -obj-$(CONFIG_IEEE80211_1_1_17) += ieee80211_1_1_13/ +obj-$(CONFIG_IEEE80211_1_1_13) += ieee80211_1_1_13/ ifeq ($(CONFIG_NET),y) obj-$(CONFIG_SYSCTL) += sysctl_net.o -- ipw3945 driver required for functionality on new Intel PRO/Wireless 3945ABG Mini-PCI Express Adapters https://launchpad.net/bugs/35215 From richard at littlerichard.org Mon Apr 24 10:40:48 2006 From: richard at littlerichard.org (Richard Samson) Date: Mon, 24 Apr 2006 10:40:48 -0000 Subject: [Bug 41061] Re: Boot failure on SCSI disk References: <20060424090127.17643.31977.malonedeb@gandwana.ubuntu.com> Message-ID: <20060424104048.4079.42427.malone@gangotri.ubuntu.com> Same error on 2.6.15-21-686, aic7xxx seems broken. I saw error on aic7xxx module loading, i will try to get them. -- Boot failure on SCSI disk https://launchpad.net/bugs/41061 From jos_dehaes at fastmail.fm Mon Apr 24 10:48:42 2006 From: jos_dehaes at fastmail.fm (Jos Dehaes) Date: Mon, 24 Apr 2006 10:48:42 -0000 Subject: [Bug 38238] Re: prism54 no longer works References: <20060405180221.24486.72499.malonedeb@gangotri.ubuntu.com> Message-ID: <20060424104842.17643.48629.malone@gandwana.ubuntu.com> *** This bug is a duplicate of bug 38278 *** Fixed in -21 kernel. Thx -- prism54 no longer works https://launchpad.net/bugs/38238 From slight_ at hotmail.com Mon Apr 24 11:32:41 2006 From: slight_ at hotmail.com (Tolan Blundell) Date: Mon, 24 Apr 2006 11:32:41 -0000 Subject: [Bug 36345] Re: speedstep won't load on ThinkPad T20 and s30 (mobile coppermine Pentium 3) References: <20060324063345.5380.9894.malonedeb@gangotri.ubuntu.com> Message-ID: <20060424113241.17670.24064.malone@gandwana.ubuntu.com> ack... sorry, accidentally clicked 'this needs to be fixed here'.. sorry. -- speedstep won't load on ThinkPad T20 and s30 (mobile coppermine Pentium 3) https://launchpad.net/bugs/36345 From rolf.offermanns at gmx.net Mon Apr 24 11:35:58 2006 From: rolf.offermanns at gmx.net (Rolf Offermanns) Date: Mon, 24 Apr 2006 11:35:58 -0000 Subject: [Bug 40304] Re: sky2 driver in 2.6.15-20 crashes on load, works in 2.6.15-19 References: <20060420095831.8495.36381.malonedeb@gandwana.ubuntu.com> Message-ID: <20060424113558.17670.14494.malone@gandwana.ubuntu.com> Works again in -21. -- sky2 driver in 2.6.15-20 crashes on load, works in 2.6.15-19 https://launchpad.net/bugs/40304 From angystardust at gmail.com Mon Apr 24 11:39:56 2006 From: angystardust at gmail.com (angystardust) Date: Mon, 24 Apr 2006 11:39:56 -0000 Subject: [Bug 29767] Re: IBM Thinkpad X41 suspend to disk unsatisfactory regression References: <20060126124346.26274.53643.malonedeb@gangotri.ubuntu.com> Message-ID: <20060424113956.4079.18885.malone@gangotri.ubuntu.com> I had the same problem before uploading to 2.6.15-21... the last kernel upload (2.6.15-21) fixes many things regarding the ata/ide support... (from the changelog) * libata: Backport of ACPI handling patch. * ide-acpi: Replaces our old IDE ACPI support code with new and shiney stuff that should work better on some hardware. * acpi-osl: Fixes some cases where code could sleep during resume (not allowed, since interrupts are disabled). * acpi: Bad characters shouldn't be fatal. Ben Collins and Matthew Garrett ROCK! Now i can suspend-to-ram and suspend-to-disk again when my x40 is docked!!! please, try again after an 'apt-get dist-upgrade'...so maybe we can finally close this old bug! -- IBM Thinkpad X41 suspend to disk unsatisfactory regression https://launchpad.net/bugs/29767 From jukka.hellen at gmail.com Mon Apr 24 12:39:21 2006 From: jukka.hellen at gmail.com (jhellen) Date: Mon, 24 Apr 2006 12:39:21 -0000 Subject: [Bug 34093] USB drive opens nautilus in loops References: <20060308153940.28632.26727.malonedeb@gandwana.ubuntu.com> Message-ID: <20060424123921.17670.48165.launchpad@canonical@gandwana.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Needs Info Description: I have a harddisk case like this for my harddrive and it has worked nicely before with Ubuntu Breezy. Now with Dapper F4 it just keeps on mounting itself. It open nautilus every minute for me. It works but it is annoying. My USB-stick doesn't do this. http://www.qtec.info/products/product.htm?artnr=14214 -- USB drive opens nautilus in loops https://launchpad.net/bugs/34093 From ian at snork.net Mon Apr 24 12:31:58 2006 From: ian at snork.net (Ian Chiew) Date: Mon, 24 Apr 2006 12:31:58 -0000 Subject: [Bug 35215] Re: ipw3945 driver required for functionality on new Intel PRO/Wireless 3945ABG Mini-PCI Express Adapters References: <20060316173707.11105.89035.malonedeb@gandwana.ubuntu.com> Message-ID: <20060424123158.17670.98255.malone@gandwana.ubuntu.com> This wireless controller also needs a binary-only regulation daemon (http://bughost.org/ipw3945/daemon/ipw3945d-1.7.18.tgz) to work. Perhaps it could be included in /lib/firmware in the kernel package? The daemon could then be automatically loaded at boot time with a udev rule like: SUBSYSTEM=="drivers", PHYSDEVDRIVER="ipw3945" ACTION=="add", RUN+="/lib/firmware/%v/ipw3945d --quiet" ACTION=="remove", RUN+="/lib/firmware/%v/ipw3945d --quiet --kill" udev doesn't have a %v kernel version substitution, so here's a quick patch to implement it: --- udev-079.orig/udev_rules.c 2006-04-24 22:24:41.000000000 +1000 +++ udev-079/udev_rules.c 2006-04-24 21:46:43.000000000 +1000 @@ -30,6 +30,7 @@ #include #include #include +#include #include "libsysfs/sysfs/libsysfs.h" #include "list.h" @@ -425,6 +426,7 @@ SUBST_ROOT, SUBST_MODALIAS, SUBST_ENV, + SUBST_KERNEL_VERSION, }; static const struct subst_map { char *name; @@ -445,10 +447,12 @@ { .name = "root", .fmt = 'r', .type = SUBST_ROOT }, { .name = "modalias", .fmt = 'A', .type = SUBST_MODALIAS }, { .name = "env", .fmt = 'E', .type = SUBST_ENV }, + { .name = "version", .fmt = 'v', .type = SUBST_KERNEL_VERSION }, { NULL, '\0', 0 } }; enum subst_type type; const struct subst_map *subst; + struct utsname kernel_version; head = string; while (1) { @@ -654,6 +658,15 @@ dbg("substitute env '%s=%s'", attr, pos); strlcat(string, pos, maxsize); break; + case SUBST_KERNEL_VERSION: + if (uname(&kernel_version) == -1) + { + dbg("could not fetch kernel version"); + break; + } + dbg("substitute kernel_version '%s'", kernel_version.release); + strlcat(string, kernel_version.release, maxsize); + break; default: err("unknown substitution type=%i", type); break; --- udev-079.orig/udev.8 2005-12-23 10:51:30.000000000 +1100 +++ udev-079/udev.8 2006-04-24 18:56:16.000000000 +1000 @@ -200,6 +200,9 @@ \fB%r\fR, \fB$root\fR The udev_root value. .TP +\fB%v\fR, \fB$version\fR +The kernel version number (as with 'uname -r'). +.TP \fB%N\fR, \fB$tempnode\fR The name of a created temporary device node to provide access to the device from a external program before the real node is created. .TP -- ipw3945 driver required for functionality on new Intel PRO/Wireless 3945ABG Mini-PCI Express Adapters https://launchpad.net/bugs/35215 From martin.pitt at ubuntu.com Mon Apr 24 12:39:21 2006 From: martin.pitt at ubuntu.com (Martin Pitt) Date: Mon, 24 Apr 2006 12:39:21 -0000 Subject: [Bug 34093] Re: USB drive opens nautilus in loops References: <20060308153940.28632.26727.malonedeb@gandwana.ubuntu.com> Message-ID: <20060424123921.17670.96561.malone@gandwana.ubuntu.com> Ah, your dmesg is full with errors like [4296493.949000] FAT: Directory bread(block 39156) failed [4296493.949000] 6:0:0:0: rejecting I/O to dead device and then you end up with the same device being re-discovered as sdb, sdc, etc. ** Changed in: gnome-volume-manager (Ubuntu) Sourcepackagename: gnome-volume-manager => linux-source-2.6.15 Assignee: Martin Pitt => (unassigned) -- USB drive opens nautilus in loops https://launchpad.net/bugs/34093 From teppic74 at hotmail.com Mon Apr 24 12:54:50 2006 From: teppic74 at hotmail.com (Barry Shilliday) Date: Mon, 24 Apr 2006 12:54:50 -0000 Subject: [Bug 27316] Video DVDs not recognised by Breezy desktop References: <20060113145355.21012.77028.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060424125450.17670.19795.launchpad@canonical@gandwana.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: Medium Status: Unconfirmed Description: After a fresh install, if you insert a video DVD, the system detects it as a DVD-ROM and pops up a 'do you want to burn' window. It's impossible to play the DVD in Totem. The /dev/dvd link exists and is correct, and there is an entry in /etc/fstab. However, if you insert an audio CD, the problem goes away. With no configuration changes at all, after inserting the CD, a video DVD is detected correctly and plays fine in Totem. -- Video DVDs not recognised by Breezy desktop https://launchpad.net/bugs/27316 From wade at ezri.org Mon Apr 24 12:45:56 2006 From: wade at ezri.org (Wade Menard) Date: Mon, 24 Apr 2006 12:45:56 -0000 Subject: [Bug 35215] Re: ipw3945 driver required for functionality on new Intel PRO/Wireless 3945ABG Mini-PCI Express Adapters References: <20060316173707.11105.89035.malonedeb@gandwana.ubuntu.com> Message-ID: <20060424124556.17670.43757.malone@gandwana.ubuntu.com> Good catch on the typo. ipw3945d is actually included in restricted- modules and is run with an /etc/modprobe.d rule. -- ipw3945 driver required for functionality on new Intel PRO/Wireless 3945ABG Mini-PCI Express Adapters https://launchpad.net/bugs/35215 From martin.pitt at ubuntu.com Mon Apr 24 12:54:49 2006 From: martin.pitt at ubuntu.com (Martin Pitt) Date: Mon, 24 Apr 2006 12:54:49 -0000 Subject: [Bug 27316] Re: Video DVDs not recognised by Breezy desktop References: <20060113145355.21012.77028.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060424125450.17670.7614.malone@gandwana.ubuntu.com> Thanks for the cdcaps.py debugging output. So, either this is a bug in the kernel's device driver, which might have uninitialized data of some kind, or it is a bug in the CD-ROM drive's firmware. ** Changed in: hal (Ubuntu) Sourcepackagename: hal => linux-source-2.6.15 Binarypackagename: hal => None Assignee: Martin Pitt => (unassigned) Status: Needs Info => Unconfirmed -- Video DVDs not recognised by Breezy desktop https://launchpad.net/bugs/27316 From martin.pitt at ubuntu.com Mon Apr 24 12:58:03 2006 From: martin.pitt at ubuntu.com (Martin Pitt) Date: Mon, 24 Apr 2006 12:58:03 -0000 Subject: [Bug 6627] Re: lexmark z53 blank pages References: <20060110202826.5372.9972.malonedeb@gangotri.ubuntu.com> Message-ID: <20060424125803.4079.5549.malone@gangotri.ubuntu.com> @Matthias: The reason is simply that cupsd runs as root, and thus cannot modprobe lp. It shouldn't have to in the first place, though. Usually 'lp' is in /etc/modules; it's currenly not for systems installed with ubiquity (see bug 40311). -- lexmark z53 blank pages https://launchpad.net/bugs/6627 From angystardust at gmail.com Mon Apr 24 13:07:29 2006 From: angystardust at gmail.com (angystardust) Date: Mon, 24 Apr 2006 13:07:29 -0000 Subject: [Bug 12483] Re: laptop-mode/IDE-APM hang on various laptops References: <20060113132548.21012.74332.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060424130729.13783.18020.malone@gangotri.ubuntu.com> Matt Zimmerman has just uploaded a new version of 'acpi-support' package... acpi-support (0.72) dapper; urgency=low . * Re-disable laptop-mode by default, to work around LP#12483 - Has the pleasant side effect of making the comment match the code -- laptop-mode/IDE-APM hang on various laptops https://launchpad.net/bugs/12483 From angystardust at gmail.com Mon Apr 24 13:15:54 2006 From: angystardust at gmail.com (angystardust) Date: Mon, 24 Apr 2006 13:15:54 -0000 Subject: [Bug 40998] Re: ati x1400 References: <20060423225444.4079.41877.malonedeb@gangotri.ubuntu.com> Message-ID: <20060424131554.13024.10002.malone@gandwana.ubuntu.com> Fixed in linux-restricted-modules-2.6.15_2.6.15.9-1: Changes: linux-restricted-modules-2.6.15 (2.6.15.9-1) dapper; urgency=low . * Update fglrx to 8.24.8, which includes support for the Radeon X1n00 series and the Mobility Radeon X1n00 series cards (closes: launchpad.net/39924) -- ati x1400 https://launchpad.net/bugs/40998 From petter.holmstrom at abo.fi Mon Apr 24 13:41:59 2006 From: petter.holmstrom at abo.fi (=?utf-8?q?Petter_Holmstr=C3=B6m?=) Date: Mon, 24 Apr 2006 13:41:59 -0000 Subject: [Bug 41061] Re: Boot failure on SCSI disk References: <20060424090127.17643.31977.malonedeb@gandwana.ubuntu.com> Message-ID: <20060424134159.13104.28668.malone@gandwana.ubuntu.com> I have the exact same problem. Switching back to the old kernel "solved" the problem. -- Boot failure on SCSI disk https://launchpad.net/bugs/41061 From gpothier at gmail.com Mon Apr 24 14:02:15 2006 From: gpothier at gmail.com (gpothier) Date: Mon, 24 Apr 2006 14:02:15 -0000 Subject: [Bug 40929] Re: ACPI S3 broken on Dell Latitude D810, worked in Breezy References: <20060423134659.17670.59364.malonedeb@gandwana.ubuntu.com> Message-ID: <20060424140215.13024.2441.malone@gandwana.ubuntu.com> More info regarding failed resume attempts: I can most of the time perform read accesses, but for some reason the system believes that my filesystems are mounted readonly: gpothier at tadzim:~$ touch t touch: cannot touch `t': Read-only file system gpothier at tadzim:~$ pwd /home/gpothier gpothier at tadzim:~$ mount /dev/sda6 on / type reiserfs (rw,noatime,notail) proc on /proc type proc (rw) /sys on /sys type sysfs (rw) varrun on /var/run type tmpfs (rw) varlock on /var/lock type tmpfs (rw) procbususb on /proc/bus/usb type usbfs (rw) udev on /dev type tmpfs (rw) devpts on /dev/pts type devpts (rw,gid=5,mode=620) devshm on /dev/shm type tmpfs (rw) lrm on /lib/modules/2.6.15-21-686/volatile type tmpfs (rw) /dev/sda7 on /home type reiserfs (rw,noatime) /dev/sda1 on /windows type vfat (rw) Trying to reset the drive: gpothier at tadzim:~$ sudo hdparm -w /dev/sda /dev/sda: HDIO_DRIVE_RESET failed: No such device And here are the messages I got on resume in the log: Apr 24 09:32:04 tadzim kernel: [4312132.815000] Freezing cpus ... Apr 24 09:32:04 tadzim kernel: [4312132.815000] Stopping tasks: ===================================================================================| Apr 24 09:32:04 tadzim kernel: [4312133.371000] ACPI: PCI interrupt for device 0000:03:01.0 disabled Apr 24 09:32:04 tadzim kernel: [4312135.170000] ACPI: PCI interrupt for device 0000:01:00.0 disabled Apr 24 09:32:04 tadzim kernel: [4312135.170000] ACPI: PCI interrupt for device 0000:00:1f.2 disabled Apr 24 09:32:04 tadzim kernel: [4312135.222000] ACPI: PCI interrupt for device 0000:00:1e.2 disabled Apr 24 09:32:04 tadzim kernel: [4312135.222000] ACPI: PCI interrupt for device 0000:00:1d.7 disabled Apr 24 09:32:04 tadzim kernel: [4312135.247000] ACPI: PCI interrupt for device 0000:00:1d.3 disabled Apr 24 09:32:04 tadzim kernel: [4312135.247000] ACPI: PCI interrupt for device 0000:00:1d.2 disabled Apr 24 09:32:04 tadzim kernel: [4312135.247000] ACPI: PCI interrupt for device 0000:00:1d.1 disabled Apr 24 09:32:04 tadzim kernel: [4312135.247000] ACPI: PCI interrupt for device 0000:00:1d.0 disabled Apr 24 09:32:04 tadzim kernel: [4314205.247000] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 169 Apr 24 09:32:04 tadzim kernel: [4314205.247000] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 169 Apr 24 09:32:04 tadzim kernel: [4314205.247000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 169 Apr 24 09:32:04 tadzim kernel: [4314205.247000] PCI: Enabling device 0000:00:1d.1 (0000 -> 0001) Apr 24 09:32:04 tadzim kernel: [4314205.247000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 209 Apr 24 09:32:04 tadzim kernel: [4314205.247000] PCI: Enabling device 0000:00:1d.2 (0000 -> 0001) Apr 24 09:32:04 tadzim kernel: [4314205.247000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 217 Apr 24 09:32:04 tadzim kernel: [4314205.247000] PCI: Enabling device 0000:00:1d.3 (0000 -> 0001) Apr 24 09:32:04 tadzim kernel: [4314205.247000] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 177 Apr 24 09:32:04 tadzim kernel: [4314205.295000] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 16 (level, low) -> IRQ 169 Apr 24 09:32:04 tadzim kernel: [4314205.299000] ehci_hcd 0000:00:1d.7: debug port 1 Apr 24 09:32:04 tadzim kernel: [4314205.303000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 Apr 24 09:32:04 tadzim kernel: [4314205.303000] ACPI: PCI Interrupt 0000:00:1e.2[A] -> GSI 16 (level, low) -> IRQ 169 Apr 24 09:32:04 tadzim kernel: [4314205.594000] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ 209 Apr 24 09:32:04 tadzim kernel: [4314205.594000] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 169 Apr 24 09:32:04 tadzim kernel: [4314205.616000] ACPI: PCI Interrupt 0000:03:01.0[A] -> GSI 19 (level, low) -> IRQ 177 Apr 24 09:32:04 tadzim kernel: [4314206.560000] ata2: dev 0 configured for UDMA/33 Apr 24 09:32:04 tadzim kernel: [4314206.847000] Restarting tasks...<6>sd 0:0:0:0: SCSI error: return code = 0x40000 Apr 24 09:32:04 tadzim kernel: [4314207.376000] end_request: I/O error, dev sda, sector 33396150 Apr 24 09:32:04 tadzim kernel: [4314207.376000] sd 0:0:0:0: SCSI error: return code = 0x40000 Apr 24 09:32:04 tadzim kernel: [4314207.376000] end_request: I/O error, dev sda, sector 33530278 Apr 24 09:32:04 tadzim kernel: [4314207.376000] sd 0:0:0:0: SCSI error: return code = 0x40000 Apr 24 09:32:04 tadzim kernel: [4314207.376000] end_request: I/O error, dev sda, sector 33318022 Apr 24 09:32:04 tadzim kernel: [4314207.376000] sd 0:0:0:0: SCSI error: return code = 0x40000 Apr 24 09:32:04 tadzim kernel: [4314207.376000] end_request: I/O error, dev sda, sector 33317982 Apr 24 09:32:04 tadzim kernel: [4314207.376000] sd 0:0:0:0: SCSI error: return code = 0x40000 Apr 24 09:32:04 tadzim Apr 24 09:32:04 tadzim Apr 24 09:32:04 tadzim Apr 24 09:32:04 -- ACPI S3 broken on Dell Latitude D810, worked in Breezy https://launchpad.net/bugs/40929 From crimsun at fungus.sh.nu Mon Apr 24 14:17:32 2006 From: crimsun at fungus.sh.nu (Daniel T. Chen) Date: Mon, 24 Apr 2006 14:17:32 -0000 Subject: [Bug 41015] Re: [ALSA] Master volume control doesn't control Headphone control References: <20060424004108.4110.947.malonedeb@gangotri.ubuntu.com> Message-ID: <20060424141732.13737.71081.launchpad@gangotri.ubuntu.com> ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Needs Info => In Progress -- [ALSA] Master volume control doesn't control Headphone control https://launchpad.net/bugs/41015 From kleeman at cims.nyu.edu Mon Apr 24 14:29:27 2006 From: kleeman at cims.nyu.edu (Richard Kleeman) Date: Mon, 24 Apr 2006 14:29:27 -0000 Subject: [Bug 14394] Re: cdrecord/k3b/nautilus problem References: <20060113133632.21012.3776.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060424142927.13737.50758.malone@gangotri.ubuntu.com> Ben, I tried the new 2.6.15-21 kernel which has the aic79xx driver from 2.6.17-rc synched and there are big problems: When booted a large number of aic79xx kernel error messages appear. They fly rapidly accross the screen however they all seem to mention a "spipopulate" error The system then hangs waiting for a root file system suggesting that the hard drive (also handled by aic79xx as it is a seagate scsi drive) is not being seen because of the above kernel errors. I have tried the 2.6.17-rc2 kernel as well and it works as well as the rc1 version although I do notice somewhat more kernel warning messages. These do not appear to affect functionality however. -- cdrecord/k3b/nautilus problem https://launchpad.net/bugs/14394 From fuka at fuxoft.cz Mon Apr 24 14:30:45 2006 From: fuka at fuxoft.cz (Frantisek Fuka) Date: Mon, 24 Apr 2006 14:30:45 -0000 Subject: [Bug 34068] Re: [acx111] USR5410 not working References: <20060308120049.10830.52259.malonedeb@gandwana.ubuntu.com> Message-ID: <20060424143045.13104.61257.malone@gandwana.ubuntu.com> I confirm this bug and the solution. The bug is still present in the latest Dapper Drake with all updates as of April 24, 2006. It affects both USR5410 and USR5416. The system finds the card and "thinks" it works, however it does not receive or send any data (on the USR5416 PCMCIA version, the green light never ever lights up). -- [acx111] USR5410 not working https://launchpad.net/bugs/34068 From gpothier at gmail.com Mon Apr 24 14:39:02 2006 From: gpothier at gmail.com (gpothier) Date: Mon, 24 Apr 2006 14:39:02 -0000 Subject: [Bug 40929] Re: ACPI S3 broken on Dell Latitude D810, worked in Breezy References: <20060423134659.17670.59364.malonedeb@gandwana.ubuntu.com> Message-ID: <20060424143902.13783.32821.malone@gangotri.ubuntu.com> Hmm, this page looks relevant: http://blog.printf.net/articles/2006/04 (from "Rawhide bug update."). Maybe we also need the patch: http://lkml.org/lkml/2006/4/21/303 -- ACPI S3 broken on Dell Latitude D810, worked in Breezy https://launchpad.net/bugs/40929 From helmutduregger at chello.at Mon Apr 24 15:01:51 2006 From: helmutduregger at chello.at (Helmut Duregger) Date: Mon, 24 Apr 2006 15:01:51 -0000 Subject: [Bug 33116] Re: powernow-k8 refuses to load References: <20060228031323.27016.20737.malonedeb@gangotri.ubuntu.com> Message-ID: <20060424150151.13104.66367.malone@gandwana.ubuntu.com> thanks, it works now!!! powernow-k8: Found 1 AMD Athlon 64 / Opteron processors (version 1.50.4) powernow-k8: 0 : fid 0x2 (1000 MHz), vid 0x12 (1100 mV) powernow-k8: 1 : fid 0xa (1800 MHz), vid 0xa (1300 mV) powernow-k8: 2 : fid 0xc (2000 MHz), vid 0x6 (1400 mV) powernow-k8: 3 : fid 0xe (2200 MHz), vid 0x2 (1500 mV) cpu_init done, current fid 0xe, vid 0x2 Linux version 2.6.15-21-k7 (buildd at rothera) (gcc version 4.0.3 (Ubuntu 4.0.3-1ubuntu5)) #1 SMP PREEMPT Fri Apr 21 17:10:51 UTC 2006 -- powernow-k8 refuses to load https://launchpad.net/bugs/33116 From daniel.kitta at googlemail.com Mon Apr 24 15:01:43 2006 From: daniel.kitta at googlemail.com (Daniel Elstner) Date: Mon, 24 Apr 2006 15:01:43 -0000 Subject: [Bug 27316] Re: Video DVDs not recognised by Breezy desktop References: <20060113145355.21012.77028.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060424150143.13024.22169.malone@gandwana.ubuntu.com> I contacted Plextor technical support and referred them to this bug report. Hopefully they will be able to give us some insight. -- Video DVDs not recognised by Breezy desktop https://launchpad.net/bugs/27316 From mklencke at gmx.net Mon Apr 24 15:06:47 2006 From: mklencke at gmx.net (Marten Klencke) Date: Mon, 24 Apr 2006 15:06:47 -0000 Subject: [Bug 6367] Re: Wrong IDE enumeration with multiple IDE controllers References: <20060102180911.29335.17628.malonedeb@gangotri.ubuntu.com> Message-ID: <20060424150647.13783.97028.launchpad@gangotri.ubuntu.com> ** Summary changed: - IDE enumeration differs between docked and undocked on ThinkPad T42 + Wrong IDE enumeration with multiple IDE controllers -- Wrong IDE enumeration with multiple IDE controllers https://launchpad.net/bugs/6367 From gerhard.unger at gmail.com Mon Apr 24 15:40:00 2006 From: gerhard.unger at gmail.com (Fuctinger) Date: Mon, 24 Apr 2006 15:40:00 -0000 Subject: [Bug 41061] Re: Boot failure on SCSI disk References: <20060424090127.17643.31977.malonedeb@gandwana.ubuntu.com> Message-ID: <20060424154000.13024.52477.malone@gandwana.ubuntu.com> I got the same problem. System hangs at Mounting root file system. Old kernel works fine though. -- Boot failure on SCSI disk https://launchpad.net/bugs/41061 From sheutlin at gmx.de Mon Apr 24 16:37:45 2006 From: sheutlin at gmx.de (Sebastian Heutling) Date: Mon, 24 Apr 2006 16:37:45 -0000 Subject: [Bug 36622] Re: No sound on iBook 2 rev. 2 References: <20060325192126.20484.96645.malonedeb@gangotri.ubuntu.com> Message-ID: <20060424163746.13024.37755.malone@gandwana.ubuntu.com> Works now again with 2.6.15-21. -- No sound on iBook 2 rev. 2 https://launchpad.net/bugs/36622 From sunix at sunix.org Mon Apr 24 16:53:02 2006 From: sunix at sunix.org (sunix) Date: Mon, 24 Apr 2006 16:53:02 -0000 Subject: [Bug 41095] MP-BIOS bug : 8254 timer not connected to IO-APIC References: <20060424130132.13104.12309.malonedeb@gandwana.ubuntu.com> Message-ID: <20060424165302.13104.64208.launchpad@canonical@gandwana.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: Hi there, I have a bug with the kernel since the 2.6.15-20-386 one (2.6.15-20 and 2.6.15-21) ubuntu dapper wont boot when i load the system (2.6.15-21) it shows : Booting 'Ubuntu, kernel 2.6.15-21-386' root (hd1,1) Filesystem type is ext2fs, partition type 0x03 kernel /boot/vmlinuz-2.6.15-21-386 root=/dev/sda2 ro quiet splash [Linux-bzImage, setup=0x1c00, size0x157b11] initrd /boot/initrd.img-2.6.15-21-386 [Linux-initrd @ 0x1b8a1000, 0x63ed66 bytes] savedefault boot Uncompressing Linux... Ok, booting the kernel [4294660.116000] .. MP-BIOS bug : 8254 timer not connected to IO-APIC [4294668.126000] PCI : Cannot allocate resource region 3 of device 0000:00:00.0 [4294668.126000] PCI : Cannot allocate resource region 0 of device 0000:02:00.0 Then it stops booting. With the 2.6.15.19 i have only these 2 lines, but the kernel boot anyway and I can start ubuntu [4294668.126000] PCI : Cannot allocate resource region 3 of device 0000:00:00.0 [4294668.126000] PCI : Cannot allocate resource region 0 of device 0000:02:00.0 -- MP-BIOS bug : 8254 timer not connected to IO-APIC https://launchpad.net/bugs/41095 From ploum at ubuntu.com Mon Apr 24 16:49:36 2006 From: ploum at ubuntu.com (Lionel Dricot) Date: Mon, 24 Apr 2006 16:49:36 -0000 Subject: [Bug 38220] Re: Xorg [dri] i915 kernel module is 1.1 References: <20060405164018.24486.5077.malonedeb@gangotri.ubuntu.com> Message-ID: <20060424164936.13783.60998.malone@gangotri.ubuntu.com> So, according to you, it's not a bug. Anyway, feel free to reopen it if needed. We don't want this kind of bug in Dapper release ! ** Changed in: xserver-xorg-driver-i810 (Ubuntu) Status: Unconfirmed => Rejected -- Xorg [dri] i915 kernel module is 1.1 https://launchpad.net/bugs/38220 From mikko at puolikuu.net Mon Apr 24 16:55:07 2006 From: mikko at puolikuu.net (mvisa) Date: Mon, 24 Apr 2006 16:55:07 -0000 Subject: [Bug 41091] Ubuntu crash when connecting to port replicator (Dell Latitude D610) References: <20060424122529.17670.95052.malonedeb@gandwana.ubuntu.com> Message-ID: <20060424165507.13783.6161.launchpad@canonical@gangotri.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: I'm using a Dell Latitude D610 with a port replicator (kind of light docking station) and Ubuntu Dapper Drake 6.06. The port replicator works fine in normal use (when laptop is started while docked), but when i take the laptop off the replicator and plug it in again the system freezes. After that, the mouse mouse moves, but nothing else is possible. Login via ssh is also not possible, so the system really has crashed (and not just X Window System). Last tested today (24.4.2006) on a completely up-to-date Dapper with kernel 2.6.15-21-686. System logs show nothing usefule (kern.log, messages). Output of lspci while docked: 0000:00:00.0 Host bridge: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller (rev 03) 0000:00:01.0 PCI bridge: Intel Corporation Mobile 915GM/PM Express PCI Express Root Port (rev 03) 0000:00:1c.0 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 (rev 03) 0000:00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 03) 0000:00:1d.1 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 03) 0000:00:1d.2 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 03) 0000:00:1d.3 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 (rev 03) 0000:00:1d.7 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 03) 0000:00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev d3) 0000:00:1e.2 Multimedia audio controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Audio Controller (rev 03) 0000:00:1e.3 Modem: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Modem Controller (rev 03) 0000:00:1f.0 ISA bridge: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge (rev 03) 0000:00:1f.2 IDE interface: Intel Corporation 82801FBM (ICH6M) SATA Controller (rev 03) 0000:01:00.0 VGA compatible controller: ATI Technologies Inc M22 [Radeon Mobility M300] 0000:02:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5751 Gigabit Ethernet PCI Express (rev 01) 0000:03:01.0 CardBus bridge: Texas Instruments PCI6515 Cardbus Controller 0000:03:01.5 Communication controller: Texas Instruments PCI6515 SmartCard Controller 0000:03:03.0 Network controller: Intel Corporation PRO/Wireless 2915ABG MiniPCI Adapter (rev 05) Let me know if i can test something or if you need other output or information. Mikko Visa -- Ubuntu crash when connecting to port replicator (Dell Latitude D610) https://launchpad.net/bugs/41091 From samtygier at yahoo.co.uk Mon Apr 24 16:53:01 2006 From: samtygier at yahoo.co.uk (sam tygier) Date: Mon, 24 Apr 2006 16:53:01 -0000 Subject: [Bug 41095] Re: MP-BIOS bug : 8254 timer not connected to IO-APIC References: <20060424130132.13104.12309.malonedeb@gandwana.ubuntu.com> Message-ID: <20060424165302.13104.37728.launchpad@gandwana.ubuntu.com> ** Changed in: Ubuntu Sourcepackagename: None => linux-source-2.6.15 -- MP-BIOS bug : 8254 timer not connected to IO-APIC https://launchpad.net/bugs/41095 From samtygier at yahoo.co.uk Mon Apr 24 16:55:07 2006 From: samtygier at yahoo.co.uk (sam tygier) Date: Mon, 24 Apr 2006 16:55:07 -0000 Subject: [Bug 41091] Re: Ubuntu crash when connecting to port replicator (Dell Latitude D610) References: <20060424122529.17670.95052.malonedeb@gandwana.ubuntu.com> Message-ID: <20060424165507.13783.90490.launchpad@gangotri.ubuntu.com> ** Changed in: Ubuntu Sourcepackagename: None => linux-source-2.6.15 -- Ubuntu crash when connecting to port replicator (Dell Latitude D610) https://launchpad.net/bugs/41091 From gvs at vsbnet.be Mon Apr 24 17:02:04 2006 From: gvs at vsbnet.be (Guy Van Sanden) Date: Mon, 24 Apr 2006 17:02:04 -0000 Subject: [Bug 41085] Dapper Beta: removable media no longer mounted automaticly References: <20060424115135.4079.13245.malonedeb@gangotri.ubuntu.com> Message-ID: <20060424170204.13737.63969.launchpad@canonical@gangotri.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Needs Info Description: I upgraded my Breezy workstation to Dapper at Flight 5 and went to the subsequent upgrades up to the Beta (last update: 2006-04-24). After the upgrade, removable devices were no longer automounted on my desktop. Creating a new user did not solve anything. There are no errors, nothing in syslog or dmesg except the succesfull detection of the drive. Clicking CD-ROM in places does mount my CD-ROM. I tested with several USB sticks and a CD-ROM. -- Dapper Beta: removable media no longer mounted automaticly https://launchpad.net/bugs/41085 From potto007 at gmail.com Mon Apr 24 16:57:44 2006 From: potto007 at gmail.com (Paul Otto) Date: Mon, 24 Apr 2006 16:57:44 -0000 Subject: [Bug 41061] Re: Boot failure on SCSI disk References: <20060424090127.17643.31977.malonedeb@gandwana.ubuntu.com> Message-ID: <20060424165744.13024.615.malone@gandwana.ubuntu.com> I experience this problem as well. I am on an ASUS Z63a notebook with SATA connected to a Samsung MP0603H 60gb harddrive. It opens the Ubuntu splash correctly, but during the mounting root portion (the second line of the splash) it hangs for a long time, before I finally give up and reboot. No problems when returning to 2.6.15-20-386. I haven't yet tried the 686 version. -- Boot failure on SCSI disk https://launchpad.net/bugs/41061 From samtygier at yahoo.co.uk Mon Apr 24 17:01:38 2006 From: samtygier at yahoo.co.uk (sam tygier) Date: Mon, 24 Apr 2006 17:01:38 -0000 Subject: [Bug 41085] Re: Dapper Beta: removable media no longer mounted automaticly References: <20060424115135.4079.13245.malonedeb@gangotri.ubuntu.com> Message-ID: <20060424170138.13024.7726.malone@gandwana.ubuntu.com> i thanks for the report. please could you follow https://wiki.ubuntu.com/DebuggingRemovableDevices and attach the information to the bug. ** Changed in: Ubuntu Sourcepackagename: None => linux-source-2.6.15 Status: Unconfirmed => Needs Info -- Dapper Beta: removable media no longer mounted automaticly https://launchpad.net/bugs/41085 From usselmann.m at icg-online.de Mon Apr 24 17:34:42 2006 From: usselmann.m at icg-online.de (Manfred Usselmann) Date: Mon, 24 Apr 2006 17:34:42 -0000 Subject: [Bug 41141] Kernel 2.6.15-21 does not boot References: <20060424173442.13783.39505.malonedeb@gangotri.ubuntu.com> Message-ID: <20060424173442.13783.39505.malonedeb@gangotri.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 linux-image-2.6.15-21-686 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: After updating my Dapper test system yesterday it fails to boot: "root (hd1,0) Filesystem type is reiserfs, partition type 0x83 kernel /boot/vmlinuz-2.6.15-21-686 root=/dev/sdb1 ro quit splash initrd /boot/vminitrd.img-2.6.15-21-686 ALERT! /dev/sdb1 does not exist. Dropping to a shell." In the BusyBox shell I can see that /dev/sda, /dev/sdb, /dev/sdc, /dev/sdd and /dev/sda1 exist, but /dev/sda2, /dev/sdb1, /dev/sdb2, /dev/sdb3, /dev/sdc1 and /dev/sdd1 are missing. Same problem with Kernel 2.6.15-21-386. Kernels 2.6.15-20-686 and -386 do boot without problems! System is an older dual cpu SMP system (2 x 800 MHz Pentium 3) -- Kernel 2.6.15-21 does not boot https://launchpad.net/bugs/41141 From rlaager at users.sf.net Mon Apr 24 17:31:07 2006 From: rlaager at users.sf.net (Richard Laager) Date: Mon, 24 Apr 2006 17:31:07 -0000 Subject: [Bug 35215] Re: ipw3945 driver required for functionality on new Intel PRO/Wireless 3945ABG Mini-PCI Express Adapters References: <20060316173707.11105.89035.malonedeb@gandwana.ubuntu.com> Message-ID: <20060424173107.13737.7683.malone@gangotri.ubuntu.com> Is there an estimate on the timeframe of -22 kernel update to fix that typo? I'd love to test this, but I don't want to spend the time to build a kernel package myself if an update is in the near future. -- ipw3945 driver required for functionality on new Intel PRO/Wireless 3945ABG Mini-PCI Express Adapters https://launchpad.net/bugs/35215 From wilbert at scarlet.nl Mon Apr 24 17:37:27 2006 From: wilbert at scarlet.nl (Wilbert) Date: Mon, 24 Apr 2006 17:37:27 -0000 Subject: [Bug 41061] Re: Boot failure on SCSI disk References: <20060424090127.17643.31977.malonedeb@gandwana.ubuntu.com> Message-ID: <20060424173727.13024.84521.malone@gandwana.ubuntu.com> I've got a simular problem too. I boot from IDE but with the latest kernel I miss all my scsi drives. I've got kernel: 2.6.15-21-386 Scsi: AHA-2940U2/U2W card with seagate drives driver (under 2.6.15-20-386) aic7xxx -- Boot failure on SCSI disk https://launchpad.net/bugs/41061 From kfitzner at excelcia.org Mon Apr 24 17:59:13 2006 From: kfitzner at excelcia.org (Kurt Fitzner) Date: Mon, 24 Apr 2006 17:59:13 -0000 Subject: [Bug 39602] Re: amd76xrom amd76xrom_init_one(): Unable to register resource 0xffc00000-0xffffffff - kernel bug? References: <20060414211022.1627.57110.malonedeb@gangotri.ubuntu.com> Message-ID: <20060424175913.13024.61354.malone@gandwana.ubuntu.com> I have a Tyan Tiger MPX (S2466N-4M) motherboard and the exact same error is displayed in Ubunto 6.06 Flight 6 (kernel 2.6.15-19-386). Additionally, there are about a hundred repititions of the following two entries in the log: [4294750.599000] CFI: Found no amd76xrom @ffc00000 device at location zero [4294750.611000] JEDEC: Found no amd76xrom @ffc00000 device at location zero -- amd76xrom amd76xrom_init_one(): Unable to register resource 0xffc00000-0xffffffff - kernel bug? https://launchpad.net/bugs/39602 From kleeman at cims.nyu.edu Mon Apr 24 18:43:56 2006 From: kleeman at cims.nyu.edu (Richard Kleeman) Date: Mon, 24 Apr 2006 18:43:56 -0000 Subject: [Bug 41061] Re: Boot failure on SCSI disk References: <20060424090127.17643.31977.malonedeb@gandwana.ubuntu.com> Message-ID: <20060424184356.13737.69719.malone@gangotri.ubuntu.com> Same problem here with the aic79xx driver. This may be due to the backporting of the new 2.6.17-rc aic79xx (and aic7xxx???) drivers. There have been some very substantial changes recently in both the aic79xx and aic7xxx drivers. I find however that 2.6.17-rc1/2 kernel works well so there may be some kind of source tree problem See here https://launchpad.net/bugs/14394 last entry. -- Boot failure on SCSI disk https://launchpad.net/bugs/41061 From kleeman at cims.nyu.edu Mon Apr 24 18:45:35 2006 From: kleeman at cims.nyu.edu (Richard Kleeman) Date: Mon, 24 Apr 2006 18:45:35 -0000 Subject: [Bug 41141] Re: Kernel 2.6.15-21 does not boot References: <20060424173442.13783.39505.malonedeb@gangotri.ubuntu.com> Message-ID: <20060424184535.13737.74534.malone@gangotri.ubuntu.com> Duplicate of 41061? -- Kernel 2.6.15-21 does not boot https://launchpad.net/bugs/41141 From mdz at ubuntu.com Mon Apr 24 18:54:58 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Mon, 24 Apr 2006 18:54:58 -0000 Subject: [Bug 31126] Re: Doesn't check for failure due to full filesystem References: <20060211062813.25235.10693.malonedeb@gangotri.ubuntu.com> Message-ID: <20060424185458.13783.26647.launchpad@gangotri.ubuntu.com> ** Bug 36849 has been marked a duplicate of this bug -- Doesn't check for failure due to full filesystem https://launchpad.net/bugs/31126 From mdz at ubuntu.com Mon Apr 24 18:54:58 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Mon, 24 Apr 2006 18:54:58 -0000 Subject: [Bug 36849] Re: initrd creation error ignored => unbootable system References: <20060327135223.6279.11012.malonedeb@gandwana.ubuntu.com> Message-ID: <20060424185458.13783.59270.launchpad@gangotri.ubuntu.com> *** This bug is a duplicate of bug 31126 *** ** This bug has been marked a duplicate of bug 31126 Doesn't check for failure due to full filesystem -- initrd creation error ignored => unbootable system https://launchpad.net/bugs/36849 From stewart at flamingspork.com Mon Apr 24 18:56:18 2006 From: stewart at flamingspork.com (Stewart Smith) Date: Mon, 24 Apr 2006 18:56:18 -0000 Subject: [Bug 37430] Re: Crash during breezy->dapper upgrade References: <20060331041215.23707.99296.malonedeb@gandwana.ubuntu.com> Message-ID: <20060424185618.13024.11917.malone@gandwana.ubuntu.com> when i get home (about a week away) i shoud be able to find some time to do a breezy install and then trial the upgrade again. -- Crash during breezy->dapper upgrade https://launchpad.net/bugs/37430 From t.harley at laposte.net Mon Apr 24 19:24:43 2006 From: t.harley at laposte.net (Topper) Date: Mon, 24 Apr 2006 19:24:43 -0000 Subject: [Bug 41061] Re: Boot failure on SCSI disk References: <20060424090127.17643.31977.malonedeb@gandwana.ubuntu.com> Message-ID: <20060424192443.13737.31175.launchpad@gangotri.ubuntu.com> ** Changed in: linux-source-2.6.15 linux-image-2.6.15-21-k7 (Ubuntu) Severity: Normal => Critical Status: Unconfirmed => Confirmed -- Boot failure on SCSI disk https://launchpad.net/bugs/41061 From usselmann.m at icg-online.de Mon Apr 24 19:33:28 2006 From: usselmann.m at icg-online.de (Manfred Usselmann) Date: Mon, 24 Apr 2006 19:33:28 -0000 Subject: [Bug 41141] Re: Kernel 2.6.15-21 does not boot References: <20060424173442.13783.39505.malonedeb@gangotri.ubuntu.com> Message-ID: <20060424193328.13024.66625.malone@gandwana.ubuntu.com> Could be. At least I'm also using a SCSI adapter with the AIC7XXX driver: scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0 aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs -- Kernel 2.6.15-21 does not boot https://launchpad.net/bugs/41141 From wilbert at scarlet.nl Mon Apr 24 20:52:42 2006 From: wilbert at scarlet.nl (Wilbert) Date: Mon, 24 Apr 2006 20:52:42 -0000 Subject: [Bug 41061] Re: Boot failure on SCSI disk References: <20060424090127.17643.31977.malonedeb@gandwana.ubuntu.com> Message-ID: <20060424205242.13737.8506.malone@gangotri.ubuntu.com> I've got a simular problem too. I boot from IDE but with the latest kernel I miss all my scsi drives. I've got kernel: 2.6.15-21-386 Scsi: AHA-2940U2/U2W card with seagate drives driver (under 2.6.15-20-386) aic7xxx -- Boot failure on SCSI disk https://launchpad.net/bugs/41061 From dr.frog at shaw.ca Mon Apr 24 21:35:02 2006 From: dr.frog at shaw.ca (dr frog) Date: Mon, 24 Apr 2006 21:35:02 -0000 Subject: [Bug 40998] Re: ati x1400 References: <20060423225444.4079.41877.malonedeb@gangotri.ubuntu.com> Message-ID: <20060424213502.13783.20141.malone@gangotri.ubuntu.com> so should i wait til tuesday to test? -- ati x1400 https://launchpad.net/bugs/40998 From personalnadir at gmail.com Mon Apr 24 21:37:47 2006 From: personalnadir at gmail.com (mystical) Date: Mon, 24 Apr 2006 21:37:47 -0000 Subject: [Bug 38880] Re: Boot Hangs at "BIOS data check successful" References: <20060409142904.32313.92361.malonedeb@gandwana.ubuntu.com> Message-ID: <20060424213747.13104.29574.malone@gandwana.ubuntu.com> I haven't checked for a newer BIOS, but a complete install from a recent Dapper Live CD has solved the problem. I now have a fully booting system, and no longer have access to the original kernel. Sorry for the vagueness, but I haven't got round to installing ndiswrapper for the new system and have to use XP to connect to the net :) -- Boot Hangs at "BIOS data check successful" https://launchpad.net/bugs/38880 From rforston at earthlink.net Mon Apr 24 22:00:15 2006 From: rforston at earthlink.net (Randy Forston) Date: Mon, 24 Apr 2006 22:00:15 -0000 Subject: [Bug 41191] Can't find Volume Group to mount filesystem References: <20060424220015.13737.80676.malonedeb@gangotri.ubuntu.com> Message-ID: <20060424220015.13737.80676.malonedeb@gangotri.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 kernel-image-2.6.15-21-386-di (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: I upgraded my Dapper Beta desktop last weekend, and the latest kernel, (Ubuntu, kernel 2.6.15-21-686 & 386), .... will not boot! Kernel starts loading "Mounting the root file system..." "Waiting for root file system..." I wait for around 3+ minutes, then I'm dropped to a shell, with the error message: "Unable to find volume group "Ubuntu"" "ALERT! /dev/mapper/Ubuntu-root does not exist. Dropping to shell!" ...which then starts BusyBox and leaves me at the prompt. Error messages state that the Volume Group can't be found. However, when I reboot and run the previous kernel, 2.6.15-20-686, no problems with booting, at all. (OK, .... in the same spot, a 15 second delay before mounting the file system, but then everything works)! -- Can't find Volume Group to mount filesystem https://launchpad.net/bugs/41191 From mdz at ubuntu.com Mon Apr 24 22:48:28 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Mon, 24 Apr 2006 22:48:28 -0000 Subject: [Bug 33531] Re: IPW3945 driver support References: <20060303102711.22115.46177.malonedeb@gandwana.ubuntu.com> Message-ID: <20060424224828.13783.12855.malone@gangotri.ubuntu.com> *** This bug is a duplicate of bug 35215 *** Rejecting spurious task, bug still open (for now) ** Changed in: Ubuntu Status: Unconfirmed => Rejected -- IPW3945 driver support https://launchpad.net/bugs/33531 From mdz at ubuntu.com Mon Apr 24 22:51:13 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Mon, 24 Apr 2006 22:51:13 -0000 Subject: [Bug 36849] Re: initrd creation error ignored => unbootable system References: <20060327135223.6279.11012.malonedeb@gandwana.ubuntu.com> Message-ID: <20060424225113.13024.47829.malone@gandwana.ubuntu.com> *** This bug is a duplicate of bug 31126 *** I see no dpkg bug here; the package was removed by debfoster ** Changed in: dpkg (Ubuntu) Status: Unconfirmed => Rejected -- initrd creation error ignored => unbootable system https://launchpad.net/bugs/36849 From ilmari at ilmari.org Tue Apr 25 00:42:02 2006 From: ilmari at ilmari.org (=?utf-8?q?Dagfinn_Ilmari_Manns=C3=A5ker?=) Date: Tue, 25 Apr 2006 00:42:02 -0000 Subject: [Bug 33950] Re: hdaps Y axis inverted References: <20060307013424.9003.68623.malonedeb@gandwana.ubuntu.com> Message-ID: <20060425004202.13737.76736.malone@gangotri.ubuntu.com> The patch only inverts the Y axis for the X40. X41 and possibly X41 tablet also need HDAPS_DMI_MATCH_INVERT_Y instead of _MATCH_NORMAL. -- hdaps Y axis inverted https://launchpad.net/bugs/33950 From joshshopping at karensnyder.com Tue Apr 25 00:48:36 2006 From: joshshopping at karensnyder.com (Josh) Date: Tue, 25 Apr 2006 00:48:36 -0000 Subject: [Bug 40846] Re: Kernel Panic Dapper Flight 6 References: <20060422221422.30538.22738.malonedeb@gangotri.ubuntu.com> Message-ID: <20060425004836.13737.91984.launchpad@gangotri.ubuntu.com> ** Attachment added: "Picture of Output" http://librarian.launchpad.net/2326825/DSCF0337.JPG -- Kernel Panic Dapper Flight 6 https://launchpad.net/bugs/40846 From rlaager at users.sf.net Tue Apr 25 00:59:14 2006 From: rlaager at users.sf.net (Richard Laager) Date: Tue, 25 Apr 2006 00:59:14 -0000 Subject: [Bug 35215] Re: ipw3945 driver required for functionality on new Intel PRO/Wireless 3945ABG Mini-PCI Express Adapters References: <20060316173707.11105.89035.malonedeb@gandwana.ubuntu.com> Message-ID: <20060425005914.13737.97831.malone@gangotri.ubuntu.com> I decided to build a kernel after all. I can confirm that the single character typo fix above corrects the problem. I now have wireless support. Thanks! -- ipw3945 driver required for functionality on new Intel PRO/Wireless 3945ABG Mini-PCI Express Adapters https://launchpad.net/bugs/35215 From ryan.sammartino at gmail.com Tue Apr 25 01:01:22 2006 From: ryan.sammartino at gmail.com (Ryan T. Sammartino) Date: Tue, 25 Apr 2006 01:01:22 -0000 Subject: [Bug 40996] Re: DapperDrake Beta (April 20 release) install: DapperDrake fails to detect Creative Labs SB Audigy LS References: <20060423222810.4110.97833.malonedeb@gangotri.ubuntu.com> Message-ID: <20060425010122.13104.50498.malone@gandwana.ubuntu.com> Booting with $ cat /proc/version Linux version 2.6.15-21-686 (buildd at rothera) (gcc version 4.0.3 (Ubuntu 4.0.3-1ubuntu5)) #1 SMP PREEMPT Fri Apr 21 16:57:03 UTC 2006 without "pci=noacpi" did not work. It looks like "pci=noacpi" is necessary for me. I wonder what changed? -- DapperDrake Beta (April 20 release) install: DapperDrake fails to detect Creative Labs SB Audigy LS https://launchpad.net/bugs/40996 From lemsx1 at gmail.com Tue Apr 25 01:07:52 2006 From: lemsx1 at gmail.com (LuisM) Date: Tue, 25 Apr 2006 01:07:52 -0000 Subject: [Bug 41209] kernel oops after 2 hours References: <20060425010752.13024.56851.malonedeb@gandwana.ubuntu.com> Message-ID: <20060425010752.13024.56851.malonedeb@gandwana.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 linux-image-2.6.15-21-686 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: at about 2 hours of using the system the kernel crashes the box with the following error: (/var/log/syslog) Apr 24 17:17:01 unreal /USR/SBIN/CRON[4485]: (root) CMD ( run-parts --report /etc/cron.hourly) Apr 24 17:21:38 unreal kernel: [4295080.304000] Unable to handle kernel paging request at virtual address 6c2f6169 Apr 24 17:21:38 unreal kernel: [4295080.304000] printing eip: Apr 24 17:21:38 unreal kernel: [4295080.304000] e1174389 Apr 24 17:21:38 unreal kernel: [4295080.304000] *pde = 00000000 Apr 24 17:21:38 unreal kernel: [4295080.304000] Oops: 0000 [#1] Apr 24 17:21:38 unreal kernel: [4295080.304000] PREEMPT SMP Apr 24 17:21:38 unreal kernel: [4295080.304000] Modules linked in: speedstep_lib cpufreq_userspace cpufreq_stats freq_table cpufreq_powersave cpufreq_ondemand cpufreq_conservative ipv6 dm_mod md_mod af_packet lp tsdev snd_mpu401 snd_mpu401_uart parport_pc snd_rawmidi snd_seq_device e100 mii parport analog gameport pcspkr rtc nvidia i2c_core floppy snd_intel8x0 snd_ac97_codec snd_ac97_bus psmouse snd_pcm_oss snd_mixer_oss serio_raw snd_pcm snd_timer snd soundcore snd_page_alloc hw_random shpchp pci_hotplug intel_agp agpgart evdev ext3 jbd ide_generic uhci_hcd usbcore ide_cd cdrom ide_disk piix generic thermal processor fan capability commoncap vga16fb vgastate fbcon tileblit font bitblit softcursor Apr 24 17:21:38 unreal kernel: [4295080.304000] CPU: 0 Apr 24 17:21:38 unreal kernel: [4295080.304000] EIP: 0060:[pg0+550630281/1069192192] Tainted: P VLI Apr 24 17:21:38 unreal kernel: [4295080.304000] EFLAGS: 00210a12 (2.6.15-21-686) Apr 24 17:21:38 unreal kernel: [4295080.304000] EIP is at nvl_remove_alloc+0x28/0x4c [nvidia] Apr 24 17:21:38 unreal kernel: [4295080.304000] eax: 6c2f6169 ebx: d13b7660 ecx: e134b660 edx: 6c2f6169 Apr 24 17:21:38 unreal kernel: [4295080.304000] esi: e134b758 edi: e134b660 ebp: e134b660 esp: ce51fcb0 Apr 24 17:21:38 unreal kernel: [4295080.304000] ds: 007b es: 007b ss: 0068 Apr 24 17:21:38 unreal kernel: [4295080.304000] Process fgfs (pid: 4555, threadinfo=ce51e000 task=ce218ab0) Apr 24 17:21:38 unreal kernel: [4295080.304000] Stack: d13b7660 e11770ee e134b660 d13b7660 e11b9334 d13b7660 00000201 00000001 Apr 24 17:21:38 unreal kernel: [4295080.304000] 00020002 f8215000 dfa5c000 c6e27ea0 de134800 beef0003 ce51fd18 e0f1f725 Apr 24 17:21:38 unreal kernel: [4295080.304000] e134b660 00000201 00000001 00000001 00000002 d13b7660 ce51fd48 e10ddf7b Apr 24 17:21:38 unreal kernel: [4295080.304000] Call Trace: Apr 24 17:21:38 unreal kernel: [4295080.304000] [pg0+550641902/1069192192] nv_free_pages+0xd8/0x142 [nvidia] I've used this system with debian before and I know that when PREEMPT is off in the kernel, the system is very stable. Configuration: $> profile-computer #==============================================================================# # profile-computer 1.17 Luis Mondesi # http://lems.kiskeyix.org/toolbox/?f=profile-computer&d=1 #==============================================================================# Host Name: unreal System Kernel: Linux unreal 2.6.15-21-686 #1 SMP PREEMPT Fri Apr 21 16:57:03 UTC 2006 i686 GNU/Linux #==============================================================================# CPU Info: Pentium III (Coppermine) Total Processors: 1 Bogomips total: 1595 #==============================================================================# Memory: 514840 kB Virtual Memory (swap): 843404 kB #==============================================================================# Host bridge: Intel Corporation 82815 815 Chipset Host Bridge and Memory Controller Hub (rev 02) PCI bridge: Intel Corporation 82815 815 Chipset AGP Bridge (rev 02) PCI bridge: Intel Corporation 82801 PCI Bridge (rev 02) ISA bridge: Intel Corporation 82801BA ISA Bridge (LPC) (rev 02) IDE interface: Intel Corporation 82801BA IDE U100 (rev 02) USB Controller: Intel Corporation 82801BA/BAM USB (Hub #1) (rev 02) SMBus: Intel Corporation 82801BA/BAM SMBus (rev 02) USB Controller: Intel Corporation 82801BA/BAM USB (Hub #2) (rev 02) Multimedia audio controller: Intel Corporation 82801BA/BAM AC'97 Audio (rev 02) Ethernet controller: Intel Corporation 82801BA/BAM/CA/CAM Ethernet Controller (rev 01) VGA compatible controller: nVidia Corporation NV11 [GeForce2 MX/MX 400] (rev a1) #==============================================================================# Distributor ID: Ubuntu Distributor Release: 6.06 Distributor Codename: dapper Distributor Description: Ubuntu (The Dapper Drake Release) Development Branch #==============================================================================# Library: libc6 Compiler Version: gcc (GCC) 4.0.3 (Ubuntu 4.0.3-1ubuntu5) #==============================================================================# /proc/cmdline root=/dev/hda1 ro quiet splash #==============================================================================# #==============================================================================# I'm in the process of re-compiling the kernel without PREEMPT. I'm not sure if that will fix this issue. -- kernel oops after 2 hours https://launchpad.net/bugs/41209 From lemsx1 at gmail.com Tue Apr 25 01:11:48 2006 From: lemsx1 at gmail.com (LuisM) Date: Tue, 25 Apr 2006 01:11:48 -0000 Subject: [Bug 41209] Re: kernel oops after 2 hours References: <20060425010752.13024.56851.malonedeb@gandwana.ubuntu.com> Message-ID: <20060425011148.13024.64410.malone@gandwana.ubuntu.com> more... Apr 24 17:21:38 unreal kernel: [4295080.304000] [pg0+550636785/1069192192] nv_kern_ioctl+0x31f/0x39a [nvidia] Apr 24 17:21:38 unreal kernel: [4295080.304000] [pg0+550631784/1069192192] nv_kern_vma_release+0x61/0x117 [nvidia] Apr 24 17:21:38 unreal kernel: [4295080.304000] [handle_BUG+73/176] handle_BUG+0x49/0xb0 Apr 24 17:21:38 unreal kernel: [4295080.304000] [pg0+550636949/1069192192] nv_kern_unlocked_ioctl+0x29/0x2d [nvidia] Apr 24 17:21:38 unreal kernel: [4295080.304000] [handle_BUG+73/176] handle_BUG+0x49/0xb0 Apr 24 17:21:38 unreal kernel: [4295080.304000] [do_ioctl+59/160] do_ioctl+0x3b/0xa0 Apr 24 17:21:38 unreal kernel: [4295080.304000] [handle_BUG+73/176] handle_BUG+0x49/0xb0 Apr 24 17:21:38 unreal kernel: [4295080.304000] [vfs_ioctl+107/560] vfs_ioctl+0x6b/0x230 Apr 24 17:21:38 unreal kernel: [4295080.304000] [handle_BUG+73/176] handle_BUG+0x49/0xb0 Apr 24 17:21:38 unreal kernel: [4295080.304000] [sys_ioctl+136/160] sys_ioctl+0x88/0xa0 Apr 24 17:21:38 unreal kernel: [4295080.304000] [handle_BUG+73/176] handle_BUG+0x49/0xb0 Apr 24 17:21:38 unreal kernel: [4295080.304000] [sysenter_past_esp+84/117] sysenter_past_esp+0x54/0x75 Apr 24 17:21:38 unreal kernel: [4295080.304000] [handle_BUG+73/176] handle_BUG+0x49/0xb0 Apr 24 17:21:38 unreal kernel: [4295080.304000] Code: 00 00 c3 53 8b 4c 24 08 8b 5c 24 0c 8b 91 a0 00 00 00 39 da 75 22 8b 02 89 81 a0 00 00 00 b8 00 00 00 00 eb 28 39 c3 74 1b 89 c2 <8b> 02 85 c0 75 f4 b8 ff ff ff ff eb 15 85 d2 75 ef 8d b6 00 00 -- kernel oops after 2 hours https://launchpad.net/bugs/41209 From toojays at toojays.net Tue Apr 25 01:19:49 2006 From: toojays at toojays.net (John Steele Scott) Date: Tue, 25 Apr 2006 01:19:49 -0000 Subject: [Bug 32394] Re: weird interaction between headphone detect and auto mute on iBook G4 (snapper/tumbler) References: <20060221234042.31322.68245.malonedeb@gangotri.ubuntu.com> Message-ID: <20060425011949.13783.13157.malone@gangotri.ubuntu.com> The latest linux-image (2.6.15-21.32) fixes this bug for me. -- weird interaction between headphone detect and auto mute on iBook G4 (snapper/tumbler) https://launchpad.net/bugs/32394 From toojays at toojays.net Tue Apr 25 01:24:28 2006 From: toojays at toojays.net (John Steele Scott) Date: Tue, 25 Apr 2006 01:24:28 -0000 Subject: [Bug 37714] Re: Sound garbled after resume after suspend References: <20060402122926.5415.33178.malonedeb@gangotri.ubuntu.com> Message-ID: <20060425012429.13104.96892.malone@gandwana.ubuntu.com> This is still an issue in the latest dapper (using kernel 2.6.15-21.32). -- Sound garbled after resume after suspend https://launchpad.net/bugs/37714 From rlaager at users.sf.net Tue Apr 25 01:30:45 2006 From: rlaager at users.sf.net (Richard Laager) Date: Tue, 25 Apr 2006 01:30:45 -0000 Subject: [Bug 41211] sdhci: Nothing happens when a card is inserted References: <20060425013045.13024.35003.malonedeb@gandwana.ubuntu.com> Message-ID: <20060425013045.13024.35003.malonedeb@gandwana.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: I'm trying to get a card reader working on my laptop. I see that the sdhci driver loads, and provides a REGISTER DUMP. I also see "mmc0: SDHCI at 0xd2007800 irq 74 DMA". But, I don't see a block device in /dev and nothing happens / nothing appears via dmesg when I insert a card. I thought perhaps having a newer version of the sdhci driver would help, so I copied it into a kernel tree. I had to pull in some MMC changes. I got stuck as there seems to be some new uevent stuff in a bus_type struct. Any ideas on what I should try next?" ** Attachment added: "dmesg_output.txt" http://librarian.launchpad.net/2336217/dmesg_output.txt -- sdhci: Nothing happens when a card is inserted https://launchpad.net/bugs/41211 From rlaager at users.sf.net Tue Apr 25 01:56:24 2006 From: rlaager at users.sf.net (Richard Laager) Date: Tue, 25 Apr 2006 01:56:24 -0000 Subject: [Bug 41214] ipw3945 WPA Patch References: <20060425015624.13024.33928.malonedeb@gandwana.ubuntu.com> Message-ID: <20060425015624.13024.33928.malonedeb@gandwana.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: There's a patch available here to properly report the WPA capability of the ipw3945. It's been accepted into the development version of the ipw3945. http://www.bughost.org/bugzilla/show_bug.cgi?id=1013 -- ipw3945 WPA Patch https://launchpad.net/bugs/41214 From rlaager at users.sf.net Tue Apr 25 02:02:17 2006 From: rlaager at users.sf.net (Richard Laager) Date: Tue, 25 Apr 2006 02:02:17 -0000 Subject: [Bug 41214] Re: ipw3945 WPA Patch References: <20060425015624.13024.33928.malonedeb@gandwana.ubuntu.com> Message-ID: <20060425020217.13104.33590.malone@gandwana.ubuntu.com> In fact, it might be worth applying the entire set of changes from 1.0.0 to 1.0.1. It seems they fixed a number of bugs: http://sourceforge.net/mailarchive/forum.php?thread_id=10223096&forum_id=47844 ** Description changed: There's a patch available here to properly report the WPA capability of the ipw3945. It's been accepted into the development version of the ipw3945. - http://sourceforge.net/mailarchive/forum.php?forum=ipw3945-devel + http://www.bughost.org/bugzilla/show_bug.cgi?id=1013 -- ipw3945 WPA Patch https://launchpad.net/bugs/41214 From web250 at optonline.net Tue Apr 25 02:02:43 2006 From: web250 at optonline.net (Jason Westerkon) Date: Tue, 25 Apr 2006 02:02:43 -0000 Subject: [Bug 35215] Re: ipw3945 driver required for functionality on new Intel PRO/Wireless 3945ABG Mini-PCI Express Adapters References: <20060316173707.11105.89035.malonedeb@gandwana.ubuntu.com> Message-ID: <20060425020243.13024.18963.malone@gandwana.ubuntu.com> That's good news to know the typo fixes it. That should I guess theorhetically give 3945 out of box support. ETA on a kernel patch/update for this? -- ipw3945 driver required for functionality on new Intel PRO/Wireless 3945ABG Mini-PCI Express Adapters https://launchpad.net/bugs/35215 From bennyhur at gmail.com Tue Apr 25 02:53:45 2006 From: bennyhur at gmail.com (benkillin) Date: Tue, 25 Apr 2006 02:53:45 -0000 Subject: [Bug 41061] Re: Boot failure on SCSI disk References: <20060424090127.17643.31977.malonedeb@gandwana.ubuntu.com> Message-ID: <20060425025345.13783.71683.malone@gangotri.ubuntu.com> I have the same problem after upgrading from kernel 2.6.15-20-k7 to 2.6.15-21-k7. I have an adaptec SCSI controller with segate drives. Seems no matter what I try, nothing will work except booting to 2.6.15-20-k7. -- Boot failure on SCSI disk https://launchpad.net/bugs/41061 From strawman at astraw.com Tue Apr 25 05:30:15 2006 From: strawman at astraw.com (astraw) Date: Tue, 25 Apr 2006 05:30:15 -0000 Subject: [Bug 41228] incorrect timestamps in video1394 References: <20060425053015.13783.40362.malonedeb@gangotri.ubuntu.com> Message-ID: <20060425053015.13783.40362.malonedeb@gangotri.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: Timestamps are wrong from the video1394 driver. This is fixed upstream in 2.6.16, but the fix is one line of code and I hope we could put it into Dapper's 2.6.15. I'm new to git, but the upstream diff appears to be at http://www.kernel.org/git/?p=linux/kernel/git/stable/linux-2.6.16.y.git;a=commitdiff;h=e4cda1654e5c0be4b68e29011e8dc04977286df9 (This is more that one line, but there's only a single line of code changed.) I've applied this patch and re-built the kernel, and I can see my timestamps returning regular intervals between frames again. Here's some more discussion indicating that it's an issue for others: http://sourceforge.net/mailarchive/forum.php?thread_id=10080509&forum_id=7492 Please let me know any more information is needed. -- incorrect timestamps in video1394 https://launchpad.net/bugs/41228 From potentialspam at telus.net Tue Apr 25 05:52:40 2006 From: potentialspam at telus.net (Troy Sobotka) Date: Tue, 25 Apr 2006 05:52:40 -0000 Subject: [Bug 41229] ehci_hcd prevents card reader from automount References: <20060425055240.13024.31109.malonedeb@gandwana.ubuntu.com> Message-ID: <20060425055240.13024.31109.malonedeb@gandwana.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: Symptoms: Card reader built into case (Antec Aria) fails to automount / appear under computer. Frequency: Always. Applies: 5.10 386, 5.10 amd64, 6.06.6 amd64 Notes: Originally discovered flaw early on in 5.10, but was temporarily fixed by adding ehci_hcd to /etc/hotplug/blacklist. At some point, the problem reappeared _despite_ ehci_hcd being listed in the blacklist file. Temporary Fix: sudo rmmod ehci_hcd ** Attachment added: "dmesg.txt" http://librarian.launchpad.net/2338088/dmesg.txt ** Attachment added: "devices.txt" http://librarian.launchpad.net/2338089/devices.txt ** Attachment added: "lshal.txt" http://librarian.launchpad.net/2338090/lshal.txt -- ehci_hcd prevents card reader from automount https://launchpad.net/bugs/41229 From gvs at vsbnet.be Tue Apr 25 06:53:57 2006 From: gvs at vsbnet.be (Guy Van Sanden) Date: Tue, 25 Apr 2006 06:53:57 -0000 Subject: [Bug 41085] Re: Dapper Beta: removable media no longer mounted automaticly References: <20060424115135.4079.13245.malonedeb@gangotri.ubuntu.com> Message-ID: <20060425065357.13737.14802.malone@gangotri.ubuntu.com> I tried to follow the procedure, but as it turns out gnome-volume-manager isn't running and starting it fails (without error message). If I invoke gnome-volume-manager 2>&1 | tee gvm.log, it exists and the file is empty. I did include the output of the other commands though. ** Attachment added: "devices" http://librarian.launchpad.net/2338139/devices.txt ** Attachment added: "dmesg" http://librarian.launchpad.net/2338140/dmesg.txt ** Attachment added: "id hal" http://librarian.launchpad.net/2338141/id.hal.txt ** Attachment added: "id current user" http://librarian.launchpad.net/2338142/id.txt ** Attachment added: "lshal" http://librarian.launchpad.net/2338143/lshal.txt ** Attachment added: "uname" http://librarian.launchpad.net/2338144/uname.txt -- Dapper Beta: removable media no longer mounted automaticly https://launchpad.net/bugs/41085 From sergey.udaltsov at gmail.com Tue Apr 25 07:47:22 2006 From: sergey.udaltsov at gmail.com (Sergey V. Udaltsov) Date: Tue, 25 Apr 2006 07:47:22 -0000 Subject: [Bug 32394] Re: weird interaction between headphone detect and auto mute on iBook G4 (snapper/tumbler) References: <20060221234042.31322.68245.malonedeb@gangotri.ubuntu.com> Message-ID: <20060425074722.13737.84270.malone@gangotri.ubuntu.com> It seems so. -- weird interaction between headphone detect and auto mute on iBook G4 (snapper/tumbler) https://launchpad.net/bugs/32394 From martin.pitt at ubuntu.com Tue Apr 25 07:58:18 2006 From: martin.pitt at ubuntu.com (Martin Pitt) Date: Tue, 25 Apr 2006 07:58:18 -0000 Subject: [Bug 32394] Re: weird interaction between headphone detect and auto mute on iBook G4 (snapper/tumbler) References: <20060221234042.31322.68245.malonedeb@gangotri.ubuntu.com> Message-ID: <20060425075818.13737.84506.malone@gangotri.ubuntu.com> Confirmed here, too. Thank you, Ben! ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Confirmed => Fix Released -- weird interaction between headphone detect and auto mute on iBook G4 (snapper/tumbler) https://launchpad.net/bugs/32394 From batti at upb.de Tue Apr 25 08:13:45 2006 From: batti at upb.de (batti) Date: Tue, 25 Apr 2006 08:13:45 -0000 Subject: [Bug 41246] New Version of spca5xx References: <20060425081345.13783.62207.malonedeb@gangotri.ubuntu.com> Message-ID: <20060425081345.13783.62207.malonedeb@gangotri.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: The version of spca5xx actually used is more than 3 month old (00.57.08 <-> 0.57.11). Can someone update this version? The current version adds support for new cameras and contain some bugfixes. It works fine for me! Thanks Batti ** Attachment added: "CHANGELOG.diff" http://librarian.launchpad.net/2338175/CHANGELOG.diff -- New Version of spca5xx https://launchpad.net/bugs/41246 From safe at joek.net Tue Apr 25 08:31:07 2006 From: safe at joek.net (Joe Kilner) Date: Tue, 25 Apr 2006 08:31:07 -0000 Subject: [Bug 37430] Re: Crash during breezy->dapper upgrade References: <20060331041215.23707.99296.malonedeb@gandwana.ubuntu.com> Message-ID: <20060425083107.13737.19329.malone@gangotri.ubuntu.com> I finally managed to fix the installation on the dual Athlon machine by Ctrl-C ing during a single user mode boot to avoid the PCMCIA hang, and then Ctrl Cing when pcmcia-cs tried to run during "dpkg --configure -a". This had to be repeated a few times... All the problems disapeared once the new K7 kernel had been installed and I could boot using that. Given my experience I strongly suspect that the issue here is the new PCMCIA code running against a breezy SMP kernel (as has already been noted in the thread). It could be that an easy fix would be to recommend that people boot using a non-SMP kernel before upgrading. -- Crash during breezy->dapper upgrade https://launchpad.net/bugs/37430 From t_buen01 at uni-muenster.de Tue Apr 25 10:25:57 2006 From: t_buen01 at uni-muenster.de (GizmoDerMokwai) Date: Tue, 25 Apr 2006 10:25:57 -0000 Subject: [Bug 41249] hp nx6125 dies because of overheading, fan doesn't start References: <20060425083311.13024.77035.malonedeb@gandwana.ubuntu.com> Message-ID: <20060425102557.28852.74625.launchpad@canonical@gandwana.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: In Progress Description: As I reported in several Forums to get rid of this bug: the Fan of my HP nx6125 (and as some other user commited on there notebooks to [different brands]) doesn't start, because i have to boot using noapic. booting without noapic makes the notebook really slow, so that you can't use it for working. booting with noapic doesn't start the cpu fan, so the notebooks dies because of overheating. Only solution is to wait untin the cpu got tempurature, reboot and then the fan starts, working all over the session in same speed. disconnecting the notebook from powersupply stops the fan and the notebook once again dies because of overheating. the notebook has a amd sempron 3000+ cpu and i'm using latest 32-bit dapper (updated via distupgrade). Sorry for my bad englisch, hope someone can fix that bug, because it's really annoying, just like my BCM43xx WLAN Adapter still isn't working. I hope this will be integrated in Dapper Final too. -- hp nx6125 dies because of overheading, fan doesn't start https://launchpad.net/bugs/41249 From mjg59 at codon.org.uk Tue Apr 25 10:25:56 2006 From: mjg59 at codon.org.uk (Matthew Garrett) Date: Tue, 25 Apr 2006 10:25:56 -0000 Subject: [Bug 41249] Re: hp nx6125 dies because of overheading, fan doesn't start References: <20060425083311.13024.77035.malonedeb@gandwana.ubuntu.com> Message-ID: <20060425102557.28852.62895.malone@gandwana.ubuntu.com> I've sent a patch to Ben that fixes this - with luck it'll be in the next kernel release. ** Changed in: acpi (Ubuntu) Sourcepackagename: acpi => linux-source-2.6.15 Binarypackagename: acpi => None Status: Unconfirmed => In Progress -- hp nx6125 dies because of overheading, fan doesn't start https://launchpad.net/bugs/41249 From sam.douglas32 at gmail.com Tue Apr 25 10:42:09 2006 From: sam.douglas32 at gmail.com (Sam Douglas) Date: Tue, 25 Apr 2006 10:42:09 -0000 Subject: [Bug 27399] Re: [Bug 27399] Re: Sound Issues Thinkpad 600X - ALSA playback choppy, OSS crashes References: <20060113145419.21012.47147.launchpad@macquarie.warthogs.hbd.com> <20060421124317.17670.75040.malone@gandwana.ubuntu.com> Message-ID: <73063fa20604250342x4f50812fl1d80f27ff49ecdcc@mail.gmail.com> Yeah, thanks, I am running Dapper on it right now; it seems to work well. On 4/22/06, Jonathan Watmough wrote: > > I installed the Dapper Beta to my own ThinkPad 600X and it has behaved > itself aside from the prism/isl3886 firmware problems. > > I have not yet tested any of the media streamer stuff, but ambient effects > like the login sound play fine. > > Also, my previous gentoo install on this machine played sound and movies > fine, and also managed suspend/resume, so I'm hoping for a similar level > from Dapper. > > -- > Sound Issues Thinkpad 600X - ALSA playback choppy, OSS crashes > https://launchpad.net/bugs/27399 > -- Sound Issues Thinkpad 600X - ALSA playback choppy, OSS crashes https://launchpad.net/bugs/27399 From tjfs at ntlworld.com Tue Apr 25 11:33:23 2006 From: tjfs at ntlworld.com (tjfs) Date: Tue, 25 Apr 2006 11:33:23 -0000 Subject: [Bug 41278] maestro3 problem returns with 2.6.12-10 References: <20060425113323.28852.5532.malonedeb@gandwana.ubuntu.com> Message-ID: <20060425113323.28852.5532.malonedeb@gandwana.ubuntu.com> Public bug reported: Affects: linux-source-2.6.12 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: This problem was fixed in 2.6.12-9 but has returned in 2.6.12-10 On my laptop the boot process hangs when it tries to load the snd_maestro3 driver. Workaround is to press Alt-F1 before it attempts to do this. The problem occurred with an earlier version but was not present in 2.6.12-9 -- maestro3 problem returns with 2.6.12-10 https://launchpad.net/bugs/41278 From gary at lyranthe.org Tue Apr 25 12:19:15 2006 From: gary at lyranthe.org (Gary Coady) Date: Tue, 25 Apr 2006 12:19:15 -0000 Subject: [Bug 41284] Don't allow a backslash in a path component (CVE-2006-1863) References: <20060425121915.28852.69433.malonedeb@gandwana.ubuntu.com> Message-ID: <20060425121915.28852.69433.malonedeb@gandwana.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: http://www.kernel.org/git/?p=linux/kernel/git/stable/linux-2.6.16.y.git;a=commit;h=5c521ce6afd3509df37117d78c711d18dd5c0a70 [PATCH] Don't allow a backslash in a path component (CVE-2006-1863) Unless Posix paths have been negotiated, the backslash, "\", is not a valid character in a path component. Signed-off-by: Dave Kleikamp Signed-off-by: Steve French Signed-off-by: Greg Kroah-Hartman ** CVE added: http://www.cve.mitre.org/cgi- bin/cvename.cgi?name=2006-1863 -- Don't allow a backslash in a path component (CVE-2006-1863) https://launchpad.net/bugs/41284 From rolf.offermanns at gmx.net Tue Apr 25 12:33:02 2006 From: rolf.offermanns at gmx.net (Rolf Offermanns) Date: Tue, 25 Apr 2006 12:33:02 -0000 Subject: [Bug 40304] Re: sky2 driver in 2.6.15-20 crashes on load, works in 2.6.15-19 References: <20060420095831.8495.36381.malonedeb@gandwana.ubuntu.com> Message-ID: <20060425123302.28941.42277.malone@gangotri.ubuntu.com> Correction: Works in -21-386 but *not* in -21-686. -- sky2 driver in 2.6.15-20 crashes on load, works in 2.6.15-19 https://launchpad.net/bugs/40304 From joverstreet at cbh.com Tue Apr 25 12:39:14 2006 From: joverstreet at cbh.com (wpshooter) Date: Tue, 25 Apr 2006 12:39:14 -0000 Subject: [Bug 41289] installing the updates breaks the program References: <20060425123914.28941.35271.malonedeb@gangotri.ubuntu.com> Message-ID: <20060425123914.28941.35271.malonedeb@gangotri.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: I have installed the 6.06 version twice now and each time as soon as I apply the available updates and attempt to restart the machine per the programs instruction, the machine will NOT boot. If I wait an extremely long time it goes to some type of shell. And at that point I have NO idea as to what I am supposed to do. Thanks. -- installing the updates breaks the program https://launchpad.net/bugs/41289 From bruce.cowan at dsl.pipex.com Tue Apr 25 12:44:06 2006 From: bruce.cowan at dsl.pipex.com (Bruce Cowan) Date: Tue, 25 Apr 2006 12:44:06 -0000 Subject: [Bug 41286] Re: x64 Ubuntu Dapper 6.06 Flight6 Network Manager - no WPA with RT2500 chipsets References: <20060425122131.28941.74037.malonedeb@gangotri.ubuntu.com> Message-ID: <20060425124407.28941.80261.launchpad@gangotri.ubuntu.com> *** This bug is a duplicate of bug 37120 *** ** Changed in: rt2500 (Ubuntu) Status: In Progress => Confirmed -- x64 Ubuntu Dapper 6.06 Flight6 Network Manager - no WPA with RT2500 chipsets https://launchpad.net/bugs/41286 From bruce.cowan at dsl.pipex.com Tue Apr 25 12:45:08 2006 From: bruce.cowan at dsl.pipex.com (Bruce Cowan) Date: Tue, 25 Apr 2006 12:45:08 -0000 Subject: [Bug 41289] Re: installing the updates breaks the program References: <20060425123914.28941.35271.malonedeb@gangotri.ubuntu.com> Message-ID: <20060425124508.28852.62220.malone@gandwana.ubuntu.com> What is actaully happening, we need more details. -- installing the updates breaks the program https://launchpad.net/bugs/41289 From samtygier at yahoo.co.uk Tue Apr 25 12:47:20 2006 From: samtygier at yahoo.co.uk (sam tygier) Date: Tue, 25 Apr 2006 12:47:20 -0000 Subject: [Bug 41286] Re: x64 Ubuntu Dapper 6.06 Flight6 Network Manager - no WPA with RT2500 chipsets References: <20060425122131.28941.74037.malonedeb@gangotri.ubuntu.com> Message-ID: <20060425124721.28852.70073.launchpad@gandwana.ubuntu.com> *** This bug is a duplicate of bug 37120 *** ** This bug has been marked a duplicate of bug 37120 wpasupplicant doesn't work properly with rt2500 driver -- x64 Ubuntu Dapper 6.06 Flight6 Network Manager - no WPA with RT2500 chipsets https://launchpad.net/bugs/41286 From bruce.cowan at dsl.pipex.com Tue Apr 25 12:45:59 2006 From: bruce.cowan at dsl.pipex.com (Bruce Cowan) Date: Tue, 25 Apr 2006 12:45:59 -0000 Subject: [Bug 41246] Re: New Version of spca5xx References: <20060425081345.13783.62207.malonedeb@gangotri.ubuntu.com> Message-ID: <20060425124559.28914.56629.launchpad@gangotri.ubuntu.com> ** Also affects: spca5xx (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Unconfirmed => Rejected -- New Version of spca5xx https://launchpad.net/bugs/41246 From samtygier at yahoo.co.uk Tue Apr 25 12:47:20 2006 From: samtygier at yahoo.co.uk (sam tygier) Date: Tue, 25 Apr 2006 12:47:20 -0000 Subject: [Bug 37120] Re: wpasupplicant doesn't work properly with rt2500 driver References: <20060329054652.7313.48354.malonedeb@gangotri.ubuntu.com> Message-ID: <20060425124721.28852.90867.launchpad@gandwana.ubuntu.com> ** Bug 41286 has been marked a duplicate of this bug -- wpasupplicant doesn't work properly with rt2500 driver https://launchpad.net/bugs/37120 From bruce.cowan at dsl.pipex.com Tue Apr 25 12:52:37 2006 From: bruce.cowan at dsl.pipex.com (Bruce Cowan) Date: Tue, 25 Apr 2006 12:52:37 -0000 Subject: [Bug 41289] Re: installing the updates breaks the program References: <20060425123914.28941.35271.malonedeb@gangotri.ubuntu.com> Message-ID: <20060425125238.28941.18698.launchpad@gangotri.ubuntu.com> ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Unconfirmed => Needs Info -- installing the updates breaks the program https://launchpad.net/bugs/41289 From bruce.cowan at dsl.pipex.com Tue Apr 25 12:51:42 2006 From: bruce.cowan at dsl.pipex.com (Bruce Cowan) Date: Tue, 25 Apr 2006 12:51:42 -0000 Subject: [Bug 41246] Re: New Version of spca5xx References: <20060425081345.13783.62207.malonedeb@gangotri.ubuntu.com> Message-ID: <20060425125142.28941.14683.malone@gangotri.ubuntu.com> It is unlikely that this will be done as Dapper is in Upstream Version Freeze (https://wiki.ubuntu.com/UpstreamVersionFreeze), so you would have to get a UVF exception, which means a lot of work (https://wiki.ubuntu.com/MOTU/UVFStatus) -- New Version of spca5xx https://launchpad.net/bugs/41246 From joverstreet at cbh.com Tue Apr 25 13:05:20 2006 From: joverstreet at cbh.com (wpshooter) Date: Tue, 25 Apr 2006 13:05:20 -0000 Subject: [Bug 41289] RE: [Bug 41289] Re: installing the updates breaks the program References: <20060425123914.28941.35271.malonedeb@gangotri.ubuntu.com> Message-ID: <56F23FE15D11C74CB89F12112A7EC761077DC6D9@cbh00mail.cbh00pri.com> Please let me know how I can help you. Although I have been using computers for about the past 30 years, I am a strict novice when it comes to Linux/Ubuntu. Do you want just a longer description in my own words ? Thanks. James R. Overstreet Paraprofessional "Nothing is more useful than silence" Cherry, Bekaert & Holland, L.L.P. 828 Main Street, 17th Floor Lynchburg, Virginia 24504 434-455-0802 direct 434-847-6643 phone 434-528-3605 fax joverstreet at cbh.com Solutions.Character.Depth. The Firm of Choice. www.cbh.com -----Original Message----- From: bounces at canonical.com [mailto:bounces at canonical.com] On Behalf Of Bruce Cowan Sent: Tuesday, April 25, 2006 8:45 AM To: James R. Overstreet Subject: [Bug 41289] Re: installing the updates breaks the program What is actaully happening, we need more details. -- installing the updates breaks the program https://launchpad.net/bugs/41289 * To learn more about CB&H, please visit our web site at http://www.cbh.com/ * U.S. Treasury Department Circular 230 Disclosure: In accordance with applicable professional regulations, please understand that, unless specifically stated otherwise, any written advice contained in, forwarded with, or attached to this communication is not a tax opinion and is not intended or written to be used, and cannot be used, by any person for the purpose of avoiding any penalties that may be imposed under the Internal Revenue code. * This email may include information that is confidential and/or subject to the accountant/client privilege. If the reader of this message is not the intended recipient, please notify us by reply email and then delete this message and destroy any copies. This transmission is not intended to and does not waive any privileges. -- installing the updates breaks the program https://launchpad.net/bugs/41289 From teppic74 at hotmail.com Tue Apr 25 13:07:19 2006 From: teppic74 at hotmail.com (Barry Shilliday) Date: Tue, 25 Apr 2006 13:07:19 -0000 Subject: [Bug 38865] Re: sky2 driver freezing system after ifdown and ifup References: <20060409125752.32313.97119.malonedeb@gandwana.ubuntu.com> Message-ID: <20060425130720.28852.19480.malone@gandwana.ubuntu.com> I can confirm this problem on my system too. Also with the sky2 driver - bringing the network down and up again causes a hard lock. ** Changed in: linux-source-2.6.15 linux-image-2.6.15-20-686 (Ubuntu) Status: Unconfirmed => Confirmed -- sky2 driver freezing system after ifdown and ifup https://launchpad.net/bugs/38865 From samtygier at yahoo.co.uk Tue Apr 25 13:09:51 2006 From: samtygier at yahoo.co.uk (sam tygier) Date: Tue, 25 Apr 2006 13:09:51 -0000 Subject: [Bug 37120] Re: wpasupplicant doesn't work properly with rt2500 driver References: <20060329054652.7313.48354.malonedeb@gangotri.ubuntu.com> Message-ID: <20060425130951.28914.21956.malone@gangotri.ubuntu.com> as a work around install the old network-manager before it started using wpasupplicant get the network-manager package https://launchpad.net/distros/ubuntu/dapper/powerpc/network-manager/0.5.1-0ubuntu19 https://launchpad.net/distros/ubuntu/dapper/i386/network-manager/0.5.1-0ubuntu19 and nm-applet https://launchpad.net/distros/ubuntu/dapper/powerpc/nm-applet/0.5.1-0ubuntu19 https://launchpad.net/distros/ubuntu/dapper/i386/nm-applet/0.5.1-0ubuntu19 if you get a message about "The NetworkManager applet could not find some required resources. It cannot continue." then run gtk-update-icon-cache -f /usr/share/icons/hicolor/ (see Bug #37128 ) (i had to run it with sudo) -- wpasupplicant doesn't work properly with rt2500 driver https://launchpad.net/bugs/37120 From ubuntu at paul.sladen.org Tue Apr 25 13:13:02 2006 From: ubuntu at paul.sladen.org (Paul Sladen) Date: Tue, 25 Apr 2006 13:13:02 -0000 Subject: [Bug 21558] Re: Thinkpad R31 requires 'i8042.nomux=1' on kernel commandline References: <20060113141328.21012.42496.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060425131302.28914.47020.malone@gangotri.ubuntu.com> I don't have working R31 hardware to test anymore; could you confirm if this "i8042.nomux=1" workaround went into the main kernel and close this bug if it did. -- Thinkpad R31 requires 'i8042.nomux=1' on kernel commandline https://launchpad.net/bugs/21558 From ubuntu-de at e-monkey.ch Tue Apr 25 13:38:46 2006 From: ubuntu-de at e-monkey.ch (emonkey) Date: Tue, 25 Apr 2006 13:38:46 -0000 Subject: [Bug 33368] Re: X freeze the computer (Dapper - glcore) References: <20060302082234.17525.50004.malonedeb@gangotri.ubuntu.com> Message-ID: <20060425133846.28941.14284.malone@gangotri.ubuntu.com> I can confirm that the problem still exist after a dist-upgrade. I'll try it with a new Installation with an Ubuntu-Install-CD and tell you the results. -- X freeze the computer (Dapper - glcore) https://launchpad.net/bugs/33368 From zulcss at gmail.com Tue Apr 25 13:53:54 2006 From: zulcss at gmail.com (ChuckShort) Date: Tue, 25 Apr 2006 13:53:54 -0000 Subject: [Bug 21558] Re: Thinkpad R31 requires 'i8042.nomux=1' on kernel commandline References: <20060113141328.21012.42496.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060425135354.28879.36077.malone@gandwana.ubuntu.com> Please attach the output of sudo dmidecode if the workaround does work. Thanks -- Thinkpad R31 requires 'i8042.nomux=1' on kernel commandline https://launchpad.net/bugs/21558 From ubuntu at paul.sladen.org Tue Apr 25 13:55:09 2006 From: ubuntu at paul.sladen.org (Paul Sladen) Date: Tue, 25 Apr 2006 13:55:09 -0000 Subject: [Bug 39509] Re: Extended keys not working on Logitech MX 700 keyboard References: <20060413221654.16443.1168.malonedeb@gandwana.ubuntu.com> Message-ID: <20060425135509.28941.77826.malone@gangotri.ubuntu.com> Hi Rob, could you list all the "changes you made to udev" and exactly what set of symlinks you have setup to enable a workaround. ** Changed in: hotkey-setup linux-image-2.6.15-20-k7 (Ubuntu) Sourcepackagename: hotkey-setup => xserver-xorg Binarypackagename: linux-image-2.6.15-20-k7 => None Status: Unconfirmed => Confirmed ** Summary changed: - Extended keys not working on Logitech MX 700 keyboard + [regression] Pointer and Button events ignored on the same /dev/input device (Logitech MX 700 keyboard) ** Summary changed: - [regression] Pointer and Button events ignored on the same /dev/input device (Logitech MX 700 keyboard) + [regression] Pointer events ignored if 'Buttons' events exist on the same /dev/input device (Logitech MX 700 keyboard) -- [regression] Pointer events ignored if 'Buttons' events exist on the same /dev/input device (Logitech MX 700 keyboard) https://launchpad.net/bugs/39509 From bruce.cowan at dsl.pipex.com Tue Apr 25 14:04:06 2006 From: bruce.cowan at dsl.pipex.com (Bruce Cowan) Date: Tue, 25 Apr 2006 14:04:06 -0000 Subject: [Bug 41289] Re: installing the updates breaks the program References: <20060425123914.28941.35271.malonedeb@gangotri.ubuntu.com> Message-ID: <20060425140407.28852.5647.malone@gandwana.ubuntu.com> Well what shell is it, is it saying that X could not start or something like that? -- installing the updates breaks the program https://launchpad.net/bugs/41289 From jhkukkon at cc.hut.fi Tue Apr 25 14:12:40 2006 From: jhkukkon at cc.hut.fi (Jussi Kukkonen) Date: Tue, 25 Apr 2006 14:12:40 -0000 Subject: [Bug 41306] Xircom pcmcia ethernet adapter stopped working in Dapper References: <20060425141240.28914.62780.malonedeb@gangotri.ubuntu.com> Message-ID: <20060425141240.28914.62780.malonedeb@gangotri.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: I have a laptop with a Xircom XE2000 pcmcia ethernet adapter. The adapter has worked out-of-the-box on Warty and Hoary (with module xirc2ps_cs AFAICT).After upgrading to Dapper, the adapter stopped working. The driver is, to my understanding, loaded; 'mii-tool' says the adapter is fine; eth0 is up and running; but no bits are moving -- pinging the router gives 'Destination Unreachable'... Also, there's nothing in 'lspci' (I don't actually know if this is bad for a pcmcia device). I'm running 2.6.15-20-686 kernel, but I did test 2.6.12-10-686 (leftover from Breezy) briefly, and there the adapter works. I have also tested booting with various grub-incantations just in case: "acpi=off", "noapic" or pci=routeirq" had no effect. Below is output from various commands. Please let me know if I can test this further. ----------------------------- $ cat /etc/network/interfaces # The loopback network interface auto lo eth0 iface lo inet loopback # This is a list of hotpluggable network interfaces. mapping hotplug script grep map eth0 iface eth0 inet static address 192.168.0.101 netmask 255.255.255.0 gateway 192.168.0.1 ----------------------------- $ ifconfig eth0 eth0 Link encap:Ethernet HWaddr 00:10:A4:B9:4E:0D inet addr:192.168.0.101 Bcast:192.168.0.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 b) TX bytes:4800 (4.6 KiB) Interrupt:3 Base address:0x300 ----------------------------- $ route Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 192.168.0.0 * 255.255.255.0 U 0 0 0 eth0 default router 0.0.0.0 UG 0 0 0 eth0 ----------------------------- Next is output from "sudo lshw", but I've edited out unrelated nodes ----------------------------- $ sudo lshw *-core *-pci *-pcmcia:0 description: CardBus bridge product: PCI1225 vendor: Texas Instruments physical id: a bus info: pci at 00:0a.0 version: 01 width: 32 bits clock: 33MHz capabilities: pcmcia bus_master cap_list configuration: driver=yenta_cardbus resources: iomemory:28000000-28000fff irq:10 *-network description: 10/100 Network PC Card product: XE2000 vendor: Xircom physical id: 0 version: 1.00 slot: Socket 0 resources: irq:3 *-network description: Ethernet interface physical id: 2 logical name: eth0 serial: 00:10:a4:b9:4e:0d capabilities: ethernet physical configuration: broadcast=yes driver=xirc2ps_cs ip=192.168.0.101 multicast=yes ----------------------------- $ sudo cardctl info PRODID_1="Xircom" PRODID_2="10/100 Network PC Card" PRODID_3="XE2000" PRODID_4="1.00" MANFID=0105,010a FUNCID=6 PRODID_1="" PRODID_2="" PRODID_3="" PRODID_4="" MANFID=0000,0000 FUNCID=255 ----------------------------- $ lsmod Module Size Used by xirc2ps_cs 21232 0 speedstep_lib 4580 0 cpufreq_userspace 6496 0 cpufreq_stats 6688 0 freq_table 4928 1 cpufreq_stats cpufreq_powersave 1920 0 cpufreq_ondemand 7752 0 cpufreq_conservative 9000 0 video 16324 0 tc1100_wmi 6884 0 sony_acpi 5516 0 pcc_acpi 12416 0 hotkey 11492 0 dev_acpi 11236 0 container 4608 0 button 6704 0 acpi_sbs 20172 0 battery 9988 1 acpi_sbs ac 5220 1 acpi_sbs i2c_acpi_ec 5120 1 acpi_sbs dm_mod 63256 1 md_mod 76052 0 lp 12356 0 nsc_ircc 25184 0 joydev 10432 0 irda 217916 1 nsc_ircc tsdev 8032 0 parport_pc 37988 1 parport 39400 2 lp,parport_pc floppy 64676 0 crc_ccitt 2240 1 irda pcspkr 2244 0 usbhid 40992 0 pcmcia 41916 1 xirc2ps_cs rtc 14068 0 snd_maestro3 27780 0 snd_ac97_codec 99776 1 snd_maestro3 snd_ac97_bus 2400 1 snd_ac97_codec snd_pcm_oss 56448 0 snd_mixer_oss 20544 1 snd_pcm_oss snd_pcm 96644 3 snd_maestro3,snd_ac97_codec,snd_pcm_oss snd_timer 26884 1 snd_pcm snd_page_alloc 11304 1 snd_pcm psmouse 40036 0 serio_raw 7748 0 snd 60004 6 snd_maestro3,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer soundcore 10784 1 snd i2c_piix4 9168 0 yenta_socket 29548 2 rsrc_nonstatic 14624 1 yenta_socket pcmcia_core 45272 3 pcmcia,yenta_socket,rsrc_nonstatic i2c_core 22848 2 i2c_acpi_ec,i2c_piix4 shpchp 49504 0 pci_hotplug 30788 1 shpchp intel_agp 24700 1 agpgart 36784 1 intel_agp evdev 10176 4 ext3 148104 1 jbd 65876 1 ext3 ide_generic 1504 0 uhci_hcd 35408 0 usbcore 137700 3 usbhid,uhci_hcd ide_cd 35780 0 cdrom 41408 1 ide_cd ide_disk 19200 3 piix 11652 1 generic 5124 0 thermal 13768 0 processor 26344 1 thermal fan 4836 0 capability 4968 0 commoncap 7328 1 capability vesafb 8636 1 fbcon 43904 72 tileblit 2784 1 fbcon font 8320 1 fbcon bitblit 6464 1 fbcon softcursor 2304 1 bitblit ----------------------------- $ sudo mii-tool -v eth0: negotiated 100baseTx-FD, link ok product info: vendor 00:05:7d, model 0 rev 0 basic mode: autonegotiation enabled basic status: autonegotiation complete, link ok capabilities: 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD advertising: 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD link partner: 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD ----------------------------- $ sudo lspci 0000:00:00.0 Host bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX Host bridge (rev 03) 0000:00:01.0 PCI bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge (rev 03) 0000:00:07.0 ISA bridge: Intel Corporation 82371AB/EB/MB PIIX4 ISA (rev 02) 0000:00:07.1 IDE interface: Intel Corporation 82371AB/EB/MB PIIX4 IDE (rev 01) 0000:00:07.2 USB Controller: Intel Corporation 82371AB/EB/MB PIIX4 USB (rev 01) 0000:00:07.3 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ACPI (rev 03) 0000:00:0a.0 CardBus bridge: Texas Instruments PCI1225 (rev 01) 0000:00:0a.1 CardBus bridge: Texas Instruments PCI1225 (rev 01) 0000:00:0d.0 Multimedia audio controller: ESS Technology ES1983S Maestro-3i PCI Audio Accelerator 0000:00:0d.1 Communication controller: ESS Technology ES1983S Maestro-3i PCI Modem Accelerator 0000:01:00.0 VGA compatible controller: Silicon Motion, Inc. SM710 LynxEM (rev a3) -- Xircom pcmcia ethernet adapter stopped working in Dapper https://launchpad.net/bugs/41306 From tommy at home.tig-grr.com Tue Apr 25 14:13:03 2006 From: tommy at home.tig-grr.com (Tom Marshall) Date: Tue, 25 Apr 2006 14:13:03 -0000 Subject: [Bug 39160] Re: [Bug 39160] Re: swsusp/hibernate started hanging recently References: <20060411162704.32233.18489.malonedeb@gandwana.ubuntu.com> <20060418192116.21557.55624.malone@gangotri.ubuntu.com> Message-ID: <20060425141303.GA26792@home.tig-grr.com> On Tue, Apr 18, 2006 at 07:21:16PM -0000, Sitsofe Wheeler wrote: > If it leads to some messages about the hibernate process anything extra > is good. No messages on the console, at all. The console can be switched between VT's 1 to 6 after the failed command, but attempting to switch to X (VT 7) results in the machine freezing. I have observed this behavior from the console twice now. -- swsusp/hibernate started hanging recently https://launchpad.net/bugs/39160 From joverstreet at cbh.com Tue Apr 25 14:26:57 2006 From: joverstreet at cbh.com (wpshooter) Date: Tue, 25 Apr 2006 14:26:57 -0000 Subject: [Bug 41289] RE: [Bug 41289] Re: installing the updates breaks the program References: <20060425123914.28941.35271.malonedeb@gangotri.ubuntu.com> Message-ID: <56F23FE15D11C74CB89F12112A7EC761077DC9FA@cbh00mail.cbh00pri.com> Bruce: I am not sure since this was the first time I had seen this. It had a HELP reference notation that when I typed in help it gave me a listing of what appeared to be command line utility parameters. Some of the verbiage on screen prior to this seems to indicate that there was a problem in accessing the filing system of the hard drive. Something like could not access /dev/hd1. However, I don't think this a machine/hardware problem, since this seems to only happen after I have installed the updates to the 6.06 version. I did a small amount of research and I think I found a forum posting from someone else who was having this or a very similar problem. If you would like to call me I can probably explain this a bit better to you on the phone or if you can give me an 800 number I would be glad to call you. You can call me directly at work at 434-455-0802. James R. Overstreet Paraprofessional "Nothing is more useful than silence" Cherry, Bekaert & Holland, L.L.P. 828 Main Street, 17th Floor Lynchburg, Virginia 24504 434-455-0802 direct 434-847-6643 phone 434-528-3605 fax joverstreet at cbh.com Solutions.Character.Depth. The Firm of Choice. www.cbh.com -----Original Message----- From: bounces at canonical.com [mailto:bounces at canonical.com] On Behalf Of Bruce Cowan Sent: Tuesday, April 25, 2006 10:04 AM To: James R. Overstreet Subject: [Bug 41289] Re: installing the updates breaks the program Well what shell is it, is it saying that X could not start or something like that? -- installing the updates breaks the program https://launchpad.net/bugs/41289 * To learn more about CB&H, please visit our web site at http://www.cbh.com/ * U.S. Treasury Department Circular 230 Disclosure: In accordance with applicable professional regulations, please understand that, unless specifically stated otherwise, any written advice contained in, forwarded with, or attached to this communication is not a tax opinion and is not intended or written to be used, and cannot be used, by any person for the purpose of avoiding any penalties that may be imposed under the Internal Revenue code. * This email may include information that is confidential and/or subject to the accountant/client privilege. If the reader of this message is not the intended recipient, please notify us by reply email and then delete this message and destroy any copies. This transmission is not intended to and does not waive any privileges. -- installing the updates breaks the program https://launchpad.net/bugs/41289 From rob at robhughes.com Tue Apr 25 14:26:06 2006 From: rob at robhughes.com (Rob Hughes) Date: Tue, 25 Apr 2006 14:26:06 -0000 Subject: [Bug 39509] Re: [regression] Pointer events ignored if 'Buttons' events exist on the same /dev/input device (Logitech MX 700 keyboard) References: <20060413221654.16443.1168.malonedeb@gandwana.ubuntu.com> Message-ID: <20060425142606.28852.12177.malone@gandwana.ubuntu.com> This is how I have my udev rules set up. It's not really a work around. I followed a how-to I found on linux-gamers.net for setting up a mx-1000. /etc/udev/rules.d # cat 01_logitech.rules KERNEL="event*", SYSFS{idVendor}="046d", SYSFS{idProduct}="c512" NAME="input/event-mx3100" SYMLINK="input/%k" KERNEL="mouse*", SYSFS{idVendor}="046d", SYSFS{idProduct}="c512" NAME="input/event-mx3100" SYMLINK="input/%k" KERNEL="event*", SYSFS{idVendor}="046d", SYSFS{idProduct}="c041" NAME="input/event-g5" SYMLINK="input/%k" KERNEL="mouse*", SYSFS{idVendor}="046d", SYSFS{idProduct}="c041" NAME="input/event-g5" SYMLINK="input/%k" Which gives: ls -l /dev/input/ total 0 crw-rw---- 1 root root 13, 64 2006-04-24 12:28 event0 crw-rw---- 1 root root 13, 65 2006-04-24 12:29 event1 lrwxrwxrwx 1 root root 8 2024-04-24 17:28 event2 -> event-g5 crw-rw---- 1 root root 13, 67 2006-04-24 12:29 event3 crw-rw---- 1 root root 13, 68 2006-04-24 12:29 event4 crw-rw---- 1 root root 13, 69 2024-04-24 17:28 event5 lrwxrwxrwx 1 root root 12 2006-04-24 12:29 event6 -> event-mx3100 lrwxrwxrwx 1 root root 12 2006-04-24 12:29 event7 -> event-mx3100 crw-rw---- 1 root root 13, 66 2024-04-24 17:28 event-g5 crw-rw---- 1 root root 13, 71 2006-04-24 12:29 event-mx3100 crw-rw---- 1 root plugdev 13, 0 2006-04-24 12:29 js0 crw-rw---- 1 root root 13, 63 2006-04-24 12:28 mice lrwxrwxrwx 1 root root 8 2024-04-24 17:28 mouse0 -> event-g5 crw-rw---- 1 root root 13, 33 2024-04-24 17:28 mouse1 lrwxrwxrwx 1 root root 12 2006-04-24 12:29 mouse2 -> event-mx3100 crw-rw---- 1 root root 13, 128 2024-04-24 17:28 ts0 crw-rw---- 1 root root 13, 129 2024-04-24 17:28 ts1 crw-rw---- 1 root root 13, 130 2006-04-24 12:29 ts2 When I use this, xorg reports that the mx 1000 mouse (the mx 3100 combo is a mx 1000 mouse and a lx 700 keyboard feeding into a single dual-channel receiver) lacks corepointer capability. Also, it should be noted that without my udev rules, the g5 mouse is mapped to event1 and the mx 1000 is mapped to event5. I also found something else; if I use a different mouse as the corepointer, then X starts and I see the extended buttons from the keyboard. But these event numbers are getting mapped to bizarre keycodes that are completely different than what they got mapped to under hoary. Many of the extended keys map to various punctuation, letter and number keys. This is very strange and it's quite possible that I still don't fully understand what's going on here. -- [regression] Pointer events ignored if 'Buttons' events exist on the same /dev/input device (Logitech MX 700 keyboard) https://launchpad.net/bugs/39509 From mail at carthik.net Tue Apr 25 14:30:44 2006 From: mail at carthik.net (Carthik Sharma) Date: Tue, 25 Apr 2006 14:30:44 -0000 Subject: [Bug 41246] Re: New Version of spca5xx References: <20060425081345.13783.62207.malonedeb@gangotri.ubuntu.com> Message-ID: <20060425143045.28941.1349.malone@gangotri.ubuntu.com> I am changing this bug to rejected, since it will not be possible to include the latest package in Dapper unless there is a proper UVF request (https://wiki.ubuntu.com/MOTU/UVFStatus ) The latest version should be synced after Dapper is out the door. If the original reporter thinks this bug was closed in error, due to some reason besides the UVF, please reopen this. Thank you for reporting this bug. ** Changed in: spca5xx (Ubuntu) Status: Unconfirmed => Rejected -- New Version of spca5xx https://launchpad.net/bugs/41246 From mail at carthik.net Tue Apr 25 14:32:30 2006 From: mail at carthik.net (Carthik Sharma) Date: Tue, 25 Apr 2006 14:32:30 -0000 Subject: [Bug 40282] Re: scp transfer couses system to freeze References: <20060420080529.8495.88291.malonedeb@gandwana.ubuntu.com> Message-ID: <20060425143230.28879.43734.malone@gandwana.ubuntu.com> Changing to "Needs info" since some information has been requested from the reporter. ** Changed in: linux-meta linux-image-2.6-386 (Ubuntu) Status: Unconfirmed => Needs Info ** Summary changed: - scp transfer couses system to freeze + scp transfer causes system to freeze -- scp transfer causes system to freeze https://launchpad.net/bugs/40282 From daniel.kitta at googlemail.com Tue Apr 25 14:44:04 2006 From: daniel.kitta at googlemail.com (Daniel Elstner) Date: Tue, 25 Apr 2006 14:44:04 -0000 Subject: [Bug 27316] Re: Video DVDs not recognised by Breezy desktop References: <20060113145355.21012.77028.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060425144404.28879.35315.malone@gandwana.ubuntu.com> Reply from Plextor Europe: "We don't provide any official support for Linux based operating systems. All we can advice here is that you check this further with the manufcaturers from that OS." Well, they did not provide inofficial support either. I wonder why they let me choose "OS: Linux" on their web form in the first place then... Now I just hope it's a kernel bug. Or if it's a firmware one, that it may be made visible on Windows somehow with appropriate tools. -- Video DVDs not recognised by Breezy desktop https://launchpad.net/bugs/27316 From bruce.cowan at dsl.pipex.com Tue Apr 25 14:50:57 2006 From: bruce.cowan at dsl.pipex.com (Bruce Cowan) Date: Tue, 25 Apr 2006 14:50:57 -0000 Subject: [Bug 41289] Re: installing the updates breaks the program References: <20060425123914.28941.35271.malonedeb@gangotri.ubuntu.com> Message-ID: <20060425145057.28914.15898.malone@gangotri.ubuntu.com> It sounds a bit like busybox, I think the best place to discuss this is the forums. The bug needs to be singled out. I think I had this bug earlier on in Dapper, it said it couldn't read /dev/hdb1. Is this the beta version, as the buggy one was flight 3 or 4. -- installing the updates breaks the program https://launchpad.net/bugs/41289 From crimsun at fungus.sh.nu Tue Apr 25 14:54:16 2006 From: crimsun at fungus.sh.nu (Daniel T. Chen) Date: Tue, 25 Apr 2006 14:54:16 -0000 Subject: [Bug 40158] Re: TerraTec DMX 6Fire 24/96 front S/PDIF coaxial input not working. References: <20060419130039.8468.60497.malonedeb@gandwana.ubuntu.com> Message-ID: <20060425145416.28914.30618.malone@gangotri.ubuntu.com> Which kernel are you using? ** Changed in: linux-source-2.6.15 (Ubuntu) Assignee: Ubuntu Kernel Team => (unassigned) Status: Unconfirmed => Needs Info -- TerraTec DMX 6Fire 24/96 front S/PDIF coaxial input not working. https://launchpad.net/bugs/40158 From crimsun at fungus.sh.nu Tue Apr 25 14:57:08 2006 From: crimsun at fungus.sh.nu (Daniel T. Chen) Date: Tue, 25 Apr 2006 14:57:08 -0000 Subject: [Bug 41015] Re: [ALSA] Master volume control doesn't control Headphone control References: <20060424004108.4110.947.malonedeb@gangotri.ubuntu.com> Message-ID: <20060425145708.28941.16112.launchpad@gangotri.ubuntu.com> ** Changed in: linux-source-2.6.15 (Ubuntu) Status: In Progress => Fix Committed -- [ALSA] Master volume control doesn't control Headphone control https://launchpad.net/bugs/41015 From cmdetzel at cox.net Tue Apr 25 15:13:50 2006 From: cmdetzel at cox.net (C. Matt Detzel) Date: Tue, 25 Apr 2006 15:13:50 -0000 Subject: [Bug 34958] Re: IRQ 11 disabled, no network, desktop / kernel freeze (Averatec laptop) - regression from Breezy References: <20060314220405.17018.47701.malonedeb@gangotri.ubuntu.com> Message-ID: <20060425151350.28914.45779.malone@gangotri.ubuntu.com> I have same laptop. Bug still persists in Beta 1. If I leave both the wireless and the wired unconfigured, and use my cardbus wireless card, all is well. Any attempts to intialize those interfaces creates the same lockups. -- IRQ 11 disabled, no network, desktop / kernel freeze (Averatec laptop) - regression from Breezy https://launchpad.net/bugs/34958 From nigelenki at comcast.net Tue Apr 25 15:12:44 2006 From: nigelenki at comcast.net (John Moser) Date: Tue, 25 Apr 2006 15:12:44 -0000 Subject: [Bug 29586] Re: Solid hangs in VIA glx code References: <20060124183403.16602.41919.malonedeb@gandwana.ubuntu.com> Message-ID: <20060425151244.28879.79515.malone@gandwana.ubuntu.com> Matthew Garret asked me to test a patch he located below, which appears to solve the problem. I can't manually trigger the bug, so I had to test based on whether the system crashes in reasonable time or not. To this end, I typically crash in about an hour**, give or take 45 minutes; picking a few (6) approximate variations I come up with 27.386 minutes for a standard deviation*. I've been up for 17h35m now, so I'm about 38.5 standard deviations above the mean; 5 standard deviations gives a 99.9999999% probability of the result being non-chance, 38.5 means the sun should burn out before this happens. In short, I'm pretty certain the below patch fixes the problem: http://webcvs.freedesktop.org/dri/drm/shared-core/via_mm.c?r1=1.21&r2=1.22&makepatch=1&diff_format=u In case anyone doesn't get it, sizeof(int) != sizeof(long) on 64-bit systems. *My variations are {25,30,15,45,10,25} from 60, in minutes. It doesn't matter whether they're negative or positive; standard deviation is calculated by (sum(variation^2))^(1/2), so the sign is lost. **My mean and variations are highly approximated. I have not made 2 hours, but I've made an hour, and also had failures within 10 minutes. Under these assumptions it is always provable to better than 99.999% that the increased system stability is related by non-chance to the changes made. -- Solid hangs in VIA glx code https://launchpad.net/bugs/29586 From joverstreet at cbh.com Tue Apr 25 15:17:18 2006 From: joverstreet at cbh.com (wpshooter) Date: Tue, 25 Apr 2006 15:17:18 -0000 Subject: [Bug 41289] RE: [Bug 41289] Re: installing the updates breaks the program References: <20060425123914.28941.35271.malonedeb@gangotri.ubuntu.com> Message-ID: <56F23FE15D11C74CB89F12112A7EC761077DCB96@cbh00mail.cbh00pri.com> I have just done a bit more research and it appears possibly to do with the driver that is associated with my Seagate SCSI hard drive. I hope they get it fixed, I am anxious to look at this O/S a little further. Thanks. James R. Overstreet Paraprofessional "Nothing is more useful than silence" Cherry, Bekaert & Holland, L.L.P. 828 Main Street, 17th Floor Lynchburg, Virginia 24504 434-455-0802 direct 434-847-6643 phone 434-528-3605 fax joverstreet at cbh.com Solutions.Character.Depth. The Firm of Choice. www.cbh.com -----Original Message----- From: bounces at canonical.com [mailto:bounces at canonical.com] On Behalf Of Bruce Cowan Sent: Tuesday, April 25, 2006 10:51 AM To: James R. Overstreet Subject: [Bug 41289] Re: installing the updates breaks the program It sounds a bit like busybox, I think the best place to discuss this is the forums. The bug needs to be singled out. I think I had this bug earlier on in Dapper, it said it couldn't read /dev/hdb1. Is this the beta version, as the buggy one was flight 3 or 4. -- installing the updates breaks the program https://launchpad.net/bugs/41289 * To learn more about CB&H, please visit our web site at http://www.cbh.com/ * U.S. Treasury Department Circular 230 Disclosure: In accordance with applicable professional regulations, please understand that, unless specifically stated otherwise, any written advice contained in, forwarded with, or attached to this communication is not a tax opinion and is not intended or written to be used, and cannot be used, by any person for the purpose of avoiding any penalties that may be imposed under the Internal Revenue code. * This email may include information that is confidential and/or subject to the accountant/client privilege. If the reader of this message is not the intended recipient, please notify us by reply email and then delete this message and destroy any copies. This transmission is not intended to and does not waive any privileges. -- installing the updates breaks the program https://launchpad.net/bugs/41289 From erik at ragnerstam.se Tue Apr 25 15:52:56 2006 From: erik at ragnerstam.se (Erik Ragnerstam) Date: Tue, 25 Apr 2006 15:52:56 -0000 Subject: [Bug 41091] Re: Ubuntu crash when connecting to port replicator (Dell Latitude D610) References: <20060424122529.17670.95052.malonedeb@gandwana.ubuntu.com> Message-ID: <20060425155256.28879.97368.malone@gandwana.ubuntu.com> I have exact the same problem, also using D610 and port replicator (but I believe all the Dxxx models have the problem). I don't have any solution but I use a little trick though. When you are about to dock the computer put it to sleep, dock it and then wake it up. Works for me (at least before sleep stopped working in dapper, hope it will be fixed before release). -- Ubuntu crash when connecting to port replicator (Dell Latitude D610) https://launchpad.net/bugs/41091 From elitepenguin at gmx.net Tue Apr 25 15:55:09 2006 From: elitepenguin at gmx.net (Nils) Date: Tue, 25 Apr 2006 15:55:09 -0000 Subject: [Bug 38702] Re: [Bug 38702] Re: sound does not work References: <20060408091302.32233.60251.malonedeb@gandwana.ubuntu.com> <20060422181630.17643.20937.malone@gandwana.ubuntu.com> Message-ID: <2f30da460604250855y45b514cfv7d76c59095f7fba5@mail.gmail.com> There was a kernel update on weekend on dapper. I tried out 2.6.15-21 and it did not work. I don't understand what the problem is, since it worked with 2.6.15-19 :( -- sound does not work https://launchpad.net/bugs/38702 From achalil at gmail.com Tue Apr 25 16:03:58 2006 From: achalil at gmail.com (capacman) Date: Tue, 25 Apr 2006 16:03:58 -0000 Subject: [Bug 38865] Re: sky2 driver freezing system after ifdown and ifup References: <20060409125752.32313.97119.malonedeb@gandwana.ubuntu.com> Message-ID: <20060425160358.28879.48078.malone@gandwana.ubuntu.com> Sometimes it does not lock the computer but give this error message capacman at ubuntu:~$ sudo ifup eth0 Password: capacman at ubuntu:~$ sudo ifdown eth0 capacman at ubuntu:~$ sudo ifup eth0 Error : Name or service not known corresponding /var/log/messages entry: [4294776.583000] sky2 eth0: enabling interface [4294776.593000] ADDRCONF(NETDEV_UP): eth0: link is not ready [4294778.287000] sky2 eth0: Link is up at 100 Mbps, full duplex, flow control both [4294778.294000] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [4294788.080000] sky2 eth0: disabling interface [4294790.073000] sky2 eth0: enabling interface [4294791.759000] sky2 eth0: Link is up at 100 Mbps, full duplex, flow control both [4294801.074000] eth0: no IPv6 routers present -- sky2 driver freezing system after ifdown and ifup https://launchpad.net/bugs/38865 From erik at ragnerstam.se Tue Apr 25 16:16:22 2006 From: erik at ragnerstam.se (Erik Ragnerstam) Date: Tue, 25 Apr 2006 16:16:22 -0000 Subject: [Bug 41091] Re: Ubuntu crash when connecting to port replicator (Dell Latitude D610) References: <20060424122529.17670.95052.malonedeb@gandwana.ubuntu.com> Message-ID: <20060425161622.28941.52805.malone@gangotri.ubuntu.com> I have exact the same problem, also using D610 and port replicator (but I believe all the Dxxx models have the problem). I don't have any solution but I use a little trick though. When you are about to dock the computer put it to sleep, dock it and then wake it up. Works for me (at least before sleep stopped working in dapper, hope it will be fixed before release). -- Ubuntu crash when connecting to port replicator (Dell Latitude D610) https://launchpad.net/bugs/41091 From philbull at gmail.com Tue Apr 25 16:21:34 2006 From: philbull at gmail.com (Phil Bull) Date: Tue, 25 Apr 2006 16:21:34 -0000 Subject: [Bug 16196] Re: ACPI half works on ASUS L4500R References: <20060113134516.21012.60183.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060425162134.28914.23149.malone@gangotri.ubuntu.com> Is this still an issue with for you with Dapper Beta? -- ACPI half works on ASUS L4500R https://launchpad.net/bugs/16196 From jgotangco at ubuntu.com Tue Apr 25 16:40:41 2006 From: jgotangco at ubuntu.com (Jerome S. Gotangco) Date: Tue, 25 Apr 2006 16:40:41 -0000 Subject: [Bug 36998] Re: Flight 5 Kernel Won't Boot on an IBM Thinkpad R30 References: <20060328130330.20514.53400.malonedeb@gangotri.ubuntu.com> Message-ID: <20060425164041.28879.32945.malone@gandwana.ubuntu.com> Please confim on Dapper Beta -21 kernel ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Unconfirmed => Needs Info -- Flight 5 Kernel Won't Boot on an IBM Thinkpad R30 https://launchpad.net/bugs/36998 From stephen.mayer at oracle.com Tue Apr 25 16:46:59 2006 From: stephen.mayer at oracle.com (Steve Mayer) Date: Tue, 25 Apr 2006 16:46:59 -0000 Subject: [Bug 41336] intel-agp.ko module will not load. Error regarding invalid format. References: <20060425164659.28852.76907.malonedeb@gandwana.ubuntu.com> Message-ID: <20060425164659.28852.76907.malonedeb@gandwana.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 linux-image-2.6.15-21-686 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: Noticed that accelerated driver was not loading DRI support (after having worked up through the 2.6.15-20 kernel. Saw that intel-agp module was not getting loaded. Attempted to manually load driver using `sudo modprobe intel-agp` and received the following error: "FATAL: Error inserting intel_agp (/lib/modules/2.6.15-21-686/kernel/drivers/char/agp/intel-agp.ko): Invalid module format" Verified by booting back into the 2.6.15-20 kernel, intel-agp module loaded and and DRI support worked just fine -- intel-agp.ko module will not load. Error regarding invalid format. https://launchpad.net/bugs/41336 From dennis at kaarsemaker.net Tue Apr 25 16:51:50 2006 From: dennis at kaarsemaker.net (Dennis Kaarsemaker) Date: Tue, 25 Apr 2006 16:51:50 -0000 Subject: [Bug 41289] Re: [Bug 41289] installing the updates breaks the program References: <20060425123914.28941.35271.malonedeb@gangotri.ubuntu.com> Message-ID: <1145983910.6207.6.camel@mirage> Which iso exactly? flight 6? beta? last daily? -- installing the updates breaks the program https://launchpad.net/bugs/41289 From joverstreet at cbh.com Tue Apr 25 17:03:40 2006 From: joverstreet at cbh.com (wpshooter) Date: Tue, 25 Apr 2006 17:03:40 -0000 Subject: [Bug 41289] RE: [Bug 41289] Re: [Bug 41289] installing the updates breaks the program References: <20060425123914.28941.35271.malonedeb@gangotri.ubuntu.com> Message-ID: <56F23FE15D11C74CB89F12112A7EC76107806F7E@cbh00mail.cbh00pri.com> All I know is that it is the one I downloaded from the website several days ago and burned to CD. It was the one for a x86 compatible. I have never understood what this flight etc. etc. that I see in various post is referring to. Maybe you could explain that to me. Thanks. James R. Overstreet Paraprofessional "Nothing is more useful than silence" Cherry, Bekaert & Holland, L.L.P. 828 Main Street, 17th Floor Lynchburg, Virginia 24504 434-455-0802 direct 434-847-6643 phone 434-528-3605 fax joverstreet at cbh.com Solutions.Character.Depth. The Firm of Choice. www.cbh.com -----Original Message----- From: bounces at canonical.com [mailto:bounces at canonical.com] On Behalf Of Dennis Kaarsemaker Sent: Tuesday, April 25, 2006 12:52 PM To: James R. Overstreet Subject: [Bug 41289] Re: [Bug 41289] installing the updates breaks the program Which iso exactly? flight 6? beta? last daily? -- installing the updates breaks the program https://launchpad.net/bugs/41289 * To learn more about CB&H, please visit our web site at http://www.cbh.com/ * U.S. Treasury Department Circular 230 Disclosure: In accordance with applicable professional regulations, please understand that, unless specifically stated otherwise, any written advice contained in, forwarded with, or attached to this communication is not a tax opinion and is not intended or written to be used, and cannot be used, by any person for the purpose of avoiding any penalties that may be imposed under the Internal Revenue code. * This email may include information that is confidential and/or subject to the accountant/client privilege. If the reader of this message is not the intended recipient, please notify us by reply email and then delete this message and destroy any copies. This transmission is not intended to and does not waive any privileges. -- installing the updates breaks the program https://launchpad.net/bugs/41289 From denon_ubuntu at yahoo.fr Tue Apr 25 17:03:27 2006 From: denon_ubuntu at yahoo.fr (denon) Date: Tue, 25 Apr 2006 17:03:27 -0000 Subject: [Bug 37059] Re: Mouse doesn't always work at gnome start-up References: <20060328194050.7313.28081.malonedeb@gangotri.ubuntu.com> Message-ID: <20060425170327.28914.58337.malone@gangotri.ubuntu.com> *** This bug is a duplicate of bug 38555 *** Since Dapper Beta, the mouse works just fine as soon as the login page appears. -- Mouse doesn't always work at gnome start-up https://launchpad.net/bugs/37059 From aurelien.delahaye at gmail.com Tue Apr 25 17:11:25 2006 From: aurelien.delahaye at gmail.com (=?utf-8?q?Aur=C3=A9lien_Delahaye?=) Date: Tue, 25 Apr 2006 17:11:25 -0000 Subject: [Bug 36402] Re: suspend on sharp PC-MW70J with 2.6.15-19 linux image version References: <20060324105822.5352.46968.malonedeb@gangotri.ubuntu.com> Message-ID: <20060425171125.28914.61231.malone@gangotri.ubuntu.com> bug corrected with new update to day (25 or 24 april 06) linux-image-2.6.15-21 -- suspend on sharp PC-MW70J with 2.6.15-19 linux image version https://launchpad.net/bugs/36402 From bruce.cowan at dsl.pipex.com Tue Apr 25 17:17:39 2006 From: bruce.cowan at dsl.pipex.com (Bruce Cowan) Date: Tue, 25 Apr 2006 17:17:39 -0000 Subject: [Bug 41289] Re: installing the updates breaks the program References: <20060425123914.28941.35271.malonedeb@gangotri.ubuntu.com> Message-ID: <20060425171739.28941.73082.malone@gangotri.ubuntu.com> The only way I can think of is seeing what size the CD is - what is the size of the disk in bytes? -- installing the updates breaks the program https://launchpad.net/bugs/41289 From bruce.cowan at dsl.pipex.com Tue Apr 25 17:18:02 2006 From: bruce.cowan at dsl.pipex.com (Bruce Cowan) Date: Tue, 25 Apr 2006 17:18:02 -0000 Subject: [Bug 41289] Re: installing the updates breaks the program References: <20060425123914.28941.35271.malonedeb@gangotri.ubuntu.com> Message-ID: <20060425171802.28852.30077.malone@gandwana.ubuntu.com> Sorry, disregard top one. -- installing the updates breaks the program https://launchpad.net/bugs/41289 From bruce.cowan at dsl.pipex.com Tue Apr 25 17:17:42 2006 From: bruce.cowan at dsl.pipex.com (Bruce Cowan) Date: Tue, 25 Apr 2006 17:17:42 -0000 Subject: [Bug 41289] Re: installing the updates breaks the program References: <20060425123914.28941.35271.malonedeb@gangotri.ubuntu.com> Message-ID: <20060425171742.28879.69444.malone@gandwana.ubuntu.com> The only way I can think of is seeing what size the CD is - what is the size of the CD in bytes? -- installing the updates breaks the program https://launchpad.net/bugs/41289 From bruce.cowan at dsl.pipex.com Tue Apr 25 17:18:51 2006 From: bruce.cowan at dsl.pipex.com (Bruce Cowan) Date: Tue, 25 Apr 2006 17:18:51 -0000 Subject: [Bug 41289] Re: installing the updates breaks the program References: <20060425123914.28941.35271.malonedeb@gangotri.ubuntu.com> Message-ID: <20060425171851.28914.23410.malone@gangotri.ubuntu.com> Actually, what does the README.diskdefines file on the CD say? ** Also affects: Ubuntu Severity: Normal Priority: (none set) Status: Unconfirmed ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Needs Info => Rejected ** Changed in: Ubuntu Status: Unconfirmed => Needs Info -- installing the updates breaks the program https://launchpad.net/bugs/41289 From bruce.cowan at dsl.pipex.com Tue Apr 25 17:22:20 2006 From: bruce.cowan at dsl.pipex.com (Bruce Cowan) Date: Tue, 25 Apr 2006 17:22:20 -0000 Subject: [Bug 41289] Re: installing the updates breaks the program References: <20060425123914.28941.35271.malonedeb@gangotri.ubuntu.com> Message-ID: <20060425172220.28941.92608.malone@gangotri.ubuntu.com> Try installing Breezy (http://www.ubuntu.com/download), it will probably work. Dapper isn't released yet. -- installing the updates breaks the program https://launchpad.net/bugs/41289 From mpatters at cs.uwaterloo.ca Tue Apr 25 17:36:25 2006 From: mpatters at cs.uwaterloo.ca (Mike Patterson) Date: Tue, 25 Apr 2006 17:36:25 -0000 Subject: [Bug 37430] Re: Crash during breezy->dapper upgrade References: <20060331041215.23707.99296.malonedeb@gandwana.ubuntu.com> Message-ID: <20060425173625.28941.64707.malone@gangotri.ubuntu.com> Alexandre, same issue again, I tried it with update-manager this time, same story except it wouldn't even let me use my local mirror. :) A co-worker updated a home machine (non-SMP kernel) with no issues, so I really think that's the key. -- Crash during breezy->dapper upgrade https://launchpad.net/bugs/37430 From joverstreet at cbh.com Tue Apr 25 17:42:28 2006 From: joverstreet at cbh.com (wpshooter) Date: Tue, 25 Apr 2006 17:42:28 -0000 Subject: [Bug 41289] RE: [Bug 41289] Re: installing the updates breaks the program References: <20060425123914.28941.35271.malonedeb@gangotri.ubuntu.com> Message-ID: <56F23FE15D11C74CB89F12112A7EC7610780709A@cbh00mail.cbh00pri.com> Yes, I was using Breezy and it worked fine other than the fact that I could never get the K3b program to function correctly. When I initially installed the dapper program and tested K3b it worked fine on that version. James R. Overstreet Paraprofessional "Nothing is more useful than silence" Cherry, Bekaert & Holland, L.L.P. 828 Main Street, 17th Floor Lynchburg, Virginia 24504 434-455-0802 direct 434-847-6643 phone 434-528-3605 fax joverstreet at cbh.com Solutions.Character.Depth. The Firm of Choice. www.cbh.com -----Original Message----- From: bounces at canonical.com [mailto:bounces at canonical.com] On Behalf Of Bruce Cowan Sent: Tuesday, April 25, 2006 1:22 PM To: James R. Overstreet Subject: [Bug 41289] Re: installing the updates breaks the program Try installing Breezy (http://www.ubuntu.com/download), it will probably work. Dapper isn't released yet. -- installing the updates breaks the program https://launchpad.net/bugs/41289 * To learn more about CB&H, please visit our web site at http://www.cbh.com/ * U.S. Treasury Department Circular 230 Disclosure: In accordance with applicable professional regulations, please understand that, unless specifically stated otherwise, any written advice contained in, forwarded with, or attached to this communication is not a tax opinion and is not intended or written to be used, and cannot be used, by any person for the purpose of avoiding any penalties that may be imposed under the Internal Revenue code. * This email may include information that is confidential and/or subject to the accountant/client privilege. If the reader of this message is not the intended recipient, please notify us by reply email and then delete this message and destroy any copies. This transmission is not intended to and does not waive any privileges. -- installing the updates breaks the program https://launchpad.net/bugs/41289 From joverstreet at cbh.com Tue Apr 25 17:45:04 2006 From: joverstreet at cbh.com (wpshooter) Date: Tue, 25 Apr 2006 17:45:04 -0000 Subject: [Bug 41289] RE: [Bug 41289] Re: installing the updates breaks the program References: <20060425123914.28941.35271.malonedeb@gangotri.ubuntu.com> Message-ID: <56F23FE15D11C74CB89F12112A7EC761078070B6@cbh00mail.cbh00pri.com> Are you saying that if I downloaded the ISO from the site again that this might be all that is needed to fix the problem ? I am at work now and I do not have my CD with me to look at. Thanks. James R. Overstreet Paraprofessional "Nothing is more useful than silence" Cherry, Bekaert & Holland, L.L.P. 828 Main Street, 17th Floor Lynchburg, Virginia 24504 434-455-0802 direct 434-847-6643 phone 434-528-3605 fax joverstreet at cbh.com Solutions.Character.Depth. The Firm of Choice. www.cbh.com -----Original Message----- From: bounces at canonical.com [mailto:bounces at canonical.com] On Behalf Of Bruce Cowan Sent: Tuesday, April 25, 2006 1:18 PM To: James R. Overstreet Subject: [Bug 41289] Re: installing the updates breaks the program The only way I can think of is seeing what size the CD is - what is the size of the CD in bytes? -- installing the updates breaks the program https://launchpad.net/bugs/41289 * To learn more about CB&H, please visit our web site at http://www.cbh.com/ * U.S. Treasury Department Circular 230 Disclosure: In accordance with applicable professional regulations, please understand that, unless specifically stated otherwise, any written advice contained in, forwarded with, or attached to this communication is not a tax opinion and is not intended or written to be used, and cannot be used, by any person for the purpose of avoiding any penalties that may be imposed under the Internal Revenue code. * This email may include information that is confidential and/or subject to the accountant/client privilege. If the reader of this message is not the intended recipient, please notify us by reply email and then delete this message and destroy any copies. This transmission is not intended to and does not waive any privileges. -- installing the updates breaks the program https://launchpad.net/bugs/41289 From stephen.mayer at oracle.com Tue Apr 25 17:53:48 2006 From: stephen.mayer at oracle.com (Steve Mayer) Date: Tue, 25 Apr 2006 17:53:48 -0000 Subject: [Bug 41336] Re: intel-agp.ko module will not load. Error regarding invalid format. References: <20060425164659.28852.76907.malonedeb@gandwana.ubuntu.com> Message-ID: <20060425175348.28941.37735.malone@gangotri.ubuntu.com> My mistake. booting into 2.6.15-20 kernel does load the intel-agp module, but DRI still doesn't work due to error "Hardware already been locked". Module issue is definitely 2.6.15-21 image issue though. -- intel-agp.ko module will not load. Error regarding invalid format. https://launchpad.net/bugs/41336 From cmdetzel at cox.net Tue Apr 25 19:20:42 2006 From: cmdetzel at cox.net (C. Matt Detzel) Date: Tue, 25 Apr 2006 19:20:42 -0000 Subject: [Bug 39391] Re: network causes complete lock up References: <20060413031912.15408.22210.malonedeb@gangotri.ubuntu.com> Message-ID: <20060425192042.28879.72988.malone@gandwana.ubuntu.com> *** This bug is a duplicate of bug 34958 *** posted this already on the earlier-created bug -- sorry for the dupe. Beta 1 has the same problem with lockups. -- network causes complete lock up https://launchpad.net/bugs/39391 From milo_casagrande at yahoo.it Tue Apr 25 19:37:29 2006 From: milo_casagrande at yahoo.it (MiloCasagrande) Date: Tue, 25 Apr 2006 19:37:29 -0000 Subject: [Bug 16196] Re: ACPI half works on ASUS L4500R References: <20060113134516.21012.60183.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060425193729.28879.10381.malone@gandwana.ubuntu.com> I've still didin't update to Beta aon that machine, tomorrow I'm planning to do it. I will let you know! Thanks! -- ACPI half works on ASUS L4500R https://launchpad.net/bugs/16196 From r.a.kleinjan at gmail.com Tue Apr 25 19:49:38 2006 From: r.a.kleinjan at gmail.com (Shinji) Date: Tue, 25 Apr 2006 19:49:38 -0000 Subject: [Bug 41365] aic7xxx (scsi) not working in kernel 2.6.15-21 References: <20060425194938.28852.50280.malonedeb@gandwana.ubuntu.com> Message-ID: <20060425194938.28852.50280.malonedeb@gandwana.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 linux-image-2.6.15-21-686 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: In the new kernel build (linux-image-2.6.15-21) the module aic7xxx is not working anymore. -- aic7xxx (scsi) not working in kernel 2.6.15-21 https://launchpad.net/bugs/41365 From roland.lezuo at chello.at Tue Apr 25 20:07:16 2006 From: roland.lezuo at chello.at (iroli) Date: Tue, 25 Apr 2006 20:07:16 -0000 Subject: [Bug 39800] Re: [Bug 39800] Re: bcm43xx loses connection after 1 min References: <20060416194508.1627.69286.malonedeb@gangotri.ubuntu.com> <20060419184733.21526.24087.malone@gangotri.ubuntu.com> Message-ID: <444E8174.3060406@chello.at> Sitsofe Wheeler wrote: > iroli: > > I meant to say > Does restricting the wifi speed to 11Mbit using > sudo iwconfig eth2 rate 11M > make the problem go away? sorry for the long delay, i've been offline for a week. Short answer to your question: no, but i'll update now and report the results shortly. regards roland lezuo -- bcm43xx loses connection after 1 min https://launchpad.net/bugs/39800 From bruce.cowan at dsl.pipex.com Tue Apr 25 20:22:41 2006 From: bruce.cowan at dsl.pipex.com (Bruce Cowan) Date: Tue, 25 Apr 2006 20:22:41 -0000 Subject: [Bug 41289] Re: installing the updates breaks the program References: <20060425123914.28941.35271.malonedeb@gangotri.ubuntu.com> Message-ID: <20060425202241.28914.29848.malone@gangotri.ubuntu.com> If Breezy worked, it would be best just to stick to it. You can always updgrade to Dapper when it's released in 5 weeks 2 days time. -- installing the updates breaks the program https://launchpad.net/bugs/41289 From roland.lezuo at chello.at Tue Apr 25 20:22:26 2006 From: roland.lezuo at chello.at (iroli) Date: Tue, 25 Apr 2006 20:22:26 -0000 Subject: [Bug 39800] Re: bcm43xx loses connection after 1 min References: <20060416194508.1627.69286.malonedeb@gangotri.ubuntu.com> Message-ID: <20060425202226.28941.51018.malone@gangotri.ubuntu.com> As there was no update for linux-image nothing to report. I suppose removing this module for the release if the stability problems can't get solved (it additionally is responsible for many freezes if resuming from suspend bug #35067) -- bcm43xx loses connection after 1 min https://launchpad.net/bugs/39800 From hvbakel at gmail.com Tue Apr 25 20:31:32 2006 From: hvbakel at gmail.com (Harm van Bakel) Date: Tue, 25 Apr 2006 20:31:32 -0000 Subject: [Bug 41373] High basal cpu load on 686 but not 386 kernel References: <20060425203132.28879.58237.malonedeb@gandwana.ubuntu.com> Message-ID: <20060425203132.28879.58237.malonedeb@gandwana.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: When running the latest 686 kernel (v20 or v21, haven't tried earlier versions) I noticed that the cpu load was very high, typically 20-30% without top showing any process that could be responsible for this. This high cpu load caused some noticable performance problems, especially in keyboard responsiveness. Keyboard repeat became very sluggish and kscreensaver showed lots of stuttering. After rebooting with the 386 kernel I don't see any problem anymore, so this seems to be specific for the 686 kernel. A screenshot of top, showing high system load without any process showing much cpu usage, and additional information can be found in the following thread: http://www.ubuntuforums.org/showthread.php?t=165742 I'm running kubuntu on a Dell Latitude D810 (though the problem is not linked to either kde/gnome, since the performance problems are also evident in console mode when X is not started). -- High basal cpu load on 686 but not 386 kernel https://launchpad.net/bugs/41373 From launchpad.net.tormod at xoxy.net Tue Apr 25 21:02:53 2006 From: launchpad.net.tormod at xoxy.net (Tormod Volden) Date: Tue, 25 Apr 2006 21:02:53 -0000 Subject: [Bug 41375] resume after hibernation fails with "busybox: page allocation failure" References: <20060425204249.28879.28055.malonedeb@gandwana.ubuntu.com> Message-ID: <20060425210253.28852.14901.launchpad@canonical@gandwana.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: Compaq Presario 701EA. Sometimes, but not every time, resume after hibernation fails, and the laptop just continues rebooting normally instead. From dmesg (I'll also attach the whole thing for completeness): [4294678.393000] Attempting manual resume [4294678.409000] Stopping tasks: =========| [4294678.409000] Shrinking memory... done (0 pages freed) [4294678.456000] Loading image metadata ... done (29 pages loaded) [4294679.475000] busybox: page allocation failure. order:0, mode:0x8020 [4294679.475000] [] __alloc_pages+0x1ee/0x2e0 Other times it resumes, but crashes hard once I touch a key to wake the screen that otherwise would stay black. This might be a unrelated issue though - I suspect something with power-manager kicking in to turn off screen or something because this happens more often when I resume after a long time hibernation. If I resume shortly after having hibernated, I rather get the busybox problem. -- resume after hibernation fails with "busybox: page allocation failure" https://launchpad.net/bugs/41375 From jhkukkon at cc.hut.fi Tue Apr 25 20:58:43 2006 From: jhkukkon at cc.hut.fi (Jussi Kukkonen) Date: Tue, 25 Apr 2006 20:58:43 -0000 Subject: [Bug 41306] correction References: <20060425141240.28914.62780.malonedeb@gangotri.ubuntu.com> Message-ID: <20060425205843.28914.30143.malone@gangotri.ubuntu.com> that should be "worked out-of-the-box in Breezy and Hoary" -- I have not tested in Warty. -- Xircom pcmcia ethernet adapter stopped working in Dapper https://launchpad.net/bugs/41306 From mjg59 at codon.org.uk Tue Apr 25 21:02:53 2006 From: mjg59 at codon.org.uk (Matthew Garrett) Date: Tue, 25 Apr 2006 21:02:53 -0000 Subject: [Bug 41375] Re: resume after hibernation fails with "busybox: page allocation failure" References: <20060425204249.28879.28055.malonedeb@gandwana.ubuntu.com> Message-ID: <20060425210253.28852.13855.malone@gandwana.ubuntu.com> This is the kernel failing to free enough RAM for resume to succeed ** Changed in: acpi-support (Ubuntu) Sourcepackagename: acpi-support => linux-source-2.6.15 -- resume after hibernation fails with "busybox: page allocation failure" https://launchpad.net/bugs/41375 From themuso at themuso.com Tue Apr 25 22:04:12 2006 From: themuso at themuso.com (Luke Yelavich) Date: Tue, 25 Apr 2006 22:04:12 -0000 Subject: [Bug 40158] Re: TerraTec DMX 6Fire 24/96 front S/PDIF coaxial input not working. References: <20060419130039.8468.60497.malonedeb@gandwana.ubuntu.com> Message-ID: <20060425220412.28852.86748.malone@gandwana.ubuntu.com> At the time, I was using 2.6.15-20-686, but am now using 2.6.15-21-686 with no apparent difference. Also running with latest dapper updates. -- TerraTec DMX 6Fire 24/96 front S/PDIF coaxial input not working. https://launchpad.net/bugs/40158 From patl at sfu.ca Tue Apr 25 22:21:18 2006 From: patl at sfu.ca (Patrick Lougheed) Date: Tue, 25 Apr 2006 22:21:18 -0000 Subject: [Bug 40119] Re: SPARC boot failed: Illegal Instruction References: <20060419084429.8468.45532.malonedeb@gandwana.ubuntu.com> Message-ID: <20060425222118.28941.2681.malone@gangotri.ubuntu.com> I've got the same problem. Machine is a SunFire V240, 1x1GHz, 512MB of RAM, and an XVR-100 video card. I've tried both the breezy mini.iso from: http://ports.ubuntu.com/ubuntu-ports/dists/breezy/main/installer-sparc/current/images/2.6/mini.iso and the dapper beta install CD from: http://cdimage.ubuntu.com/ports/releases/6.06/beta/ubuntu-6.06-beta-install-sparc.iso The breezy mini.iso gives "Fast Instruction Access MMU Miss," while the dapper install CD gives "Illegal instruction." (I've tried the netboot tftp images, but both immediately blank the screen after writing "Booting kernel..." - screen goes black, and I'm not sure why. I suspect it starts writing to the terminal, but I don't have a console to try with.) Solaris isn't currently installed, but I'll try to install and get a prtconf output, if that could help. -- SPARC boot failed: Illegal Instruction https://launchpad.net/bugs/40119 From crimsun at fungus.sh.nu Tue Apr 25 22:28:14 2006 From: crimsun at fungus.sh.nu (Daniel T. Chen) Date: Tue, 25 Apr 2006 22:28:14 -0000 Subject: [Bug 40158] Re: TerraTec DMX 6Fire 24/96 front S/PDIF coaxial input not working. References: <20060419130039.8468.60497.malonedeb@gandwana.ubuntu.com> Message-ID: <20060425222814.28879.58264.malone@gandwana.ubuntu.com> Ok, I'll need to merge the sound/pci/ice1712/* fixes for the 6fire (I remember seeing them but didn't have time to push them into 21.31), which may take a week or so due to my schedule. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Needs Info => In Progress -- TerraTec DMX 6Fire 24/96 front S/PDIF coaxial input not working. https://launchpad.net/bugs/40158 From launchpad at groovix.com Tue Apr 25 22:39:15 2006 From: launchpad at groovix.com (Michael Pardee) Date: Tue, 25 Apr 2006 22:39:15 -0000 Subject: [Bug 35213] Re: hibernate fails when not on AC power on HP Pavilion ZT3000 - regression from breezy References: <20060316170910.6510.54248.malonedeb@gangotri.ubuntu.com> Message-ID: <20060425223915.28852.83266.malone@gandwana.ubuntu.com> The slow hibernate on battery is also problem on both the MSI 1013 and 1029 laptops using the latest dapper updates (S270 and M635 retail models) Disabling laptop mode in both /etc/default/acpi-support and /etc/laptop-mode/laptop-mode.conf had no effect. Is the problem really laptop-mode or could something else cause this symptom? I might try disabling laptop-mode in the kernel. -- hibernate fails when not on AC power on HP Pavilion ZT3000 - regression from breezy https://launchpad.net/bugs/35213 From jo-ker at mailcity.com Tue Apr 25 22:51:38 2006 From: jo-ker at mailcity.com (Sef) Date: Tue, 25 Apr 2006 22:51:38 -0000 Subject: [Bug 36089] Re: After Kernel update (3/21/2006) no sound References: <20060323010921.24660.83604.malonedeb@gandwana.ubuntu.com> Message-ID: <20060425225138.28914.77611.malone@gangotri.ubuntu.com> To those who are thinking about upgrading and have the AC97, the bug is still in Dapper Beta. -- After Kernel update (3/21/2006) no sound https://launchpad.net/bugs/36089 From draimus at gmail.com Tue Apr 25 22:57:38 2006 From: draimus at gmail.com (draimus) Date: Tue, 25 Apr 2006 22:57:38 -0000 Subject: [Bug 36998] Re: Flight 5 Kernel Won't Boot on an IBM Thinkpad R30 References: <20060328130330.20514.53400.malonedeb@gangotri.ubuntu.com> Message-ID: <20060425225738.28941.39607.malone@gangotri.ubuntu.com> Same issue on the Dapper Beta -20 kernel (-21 isn't available on the live cd yet). -- Flight 5 Kernel Won't Boot on an IBM Thinkpad R30 https://launchpad.net/bugs/36998 From deckard at montanasky.us Tue Apr 25 23:06:35 2006 From: deckard at montanasky.us (Doobie9) Date: Tue, 25 Apr 2006 23:06:35 -0000 Subject: [Bug 41405] Sleep Mode unsupported on iMacG3/Slotloading. References: <20060425230134.28914.17928.malonedeb@gangotri.ubuntu.com> Message-ID: <20060425230635.28852.92456.launchpad@canonical@gandwana.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: Sleep mode doesn't work on PPC G3 iMac (Slot-loading). Even after activating it in the power management preferences, clicking 'ok' of the warning, I get this message from the dmesg: [ 371.327157] Sleep mode not supported on this machine Neither this sleep mode nor monitor sleep works. This is with Dapper Beta. -- Sleep Mode unsupported on iMacG3/Slotloading. https://launchpad.net/bugs/41405 From deckard at montanasky.us Tue Apr 25 23:01:34 2006 From: deckard at montanasky.us (Doobie9) Date: Tue, 25 Apr 2006 23:01:34 -0000 Subject: [Bug 41405] Sleep Mode unsupported on iMacG3/Slotloading. References: <20060425230134.28914.17928.malonedeb@gangotri.ubuntu.com> Message-ID: <20060425230134.28914.17928.malonedeb@gangotri.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: Sleep mode doesn't work on PPC G3 iMac (Slot-loading). Even after activating it in the power management preferences, clicking 'ok' of the warning, I get this message from the dmesg: [ 371.327157] Sleep mode not supported on this machine Neither this sleep mode nor monitor sleep works. This is with Dapper Beta. -- Sleep Mode unsupported on iMacG3/Slotloading. https://launchpad.net/bugs/41405 From samtygier at yahoo.co.uk Tue Apr 25 23:06:34 2006 From: samtygier at yahoo.co.uk (sam tygier) Date: Tue, 25 Apr 2006 23:06:34 -0000 Subject: [Bug 41405] Re: Sleep Mode unsupported on iMacG3/Slotloading. References: <20060425230134.28914.17928.malonedeb@gangotri.ubuntu.com> Message-ID: <20060425230635.28852.45054.launchpad@gandwana.ubuntu.com> ** Changed in: Ubuntu Sourcepackagename: None => linux-source-2.6.15 -- Sleep Mode unsupported on iMacG3/Slotloading. https://launchpad.net/bugs/41405 From crimsun at fungus.sh.nu Tue Apr 25 23:22:46 2006 From: crimsun at fungus.sh.nu (Daniel T. Chen) Date: Tue, 25 Apr 2006 23:22:46 -0000 Subject: [Bug 36089] Re: After Kernel update (3/21/2006) no sound References: <20060323010921.24660.83604.malonedeb@gandwana.ubuntu.com> Message-ID: <20060425232246.28852.39608.malone@gandwana.ubuntu.com> This is not a kernel/sound bug, it seems to be another issue altogether, possibly (assignable to) gdm or gnome-session, as evidenced by the fact that you can hear something when the gdm greeter appears. Again, please _attach_ (last time you commented inline) the output from ``amixer -c0 && lsof /dev/dsp* /dev/snd/*'' while logged into GNOME. -- After Kernel update (3/21/2006) no sound https://launchpad.net/bugs/36089 From aquarichy at gmail.com Wed Apr 26 00:25:16 2006 From: aquarichy at gmail.com (Richard Schwarting) Date: Wed, 26 Apr 2006 00:25:16 -0000 Subject: [Bug 30153] Re: IBM X31 freeze under X, shortly after boot References: <20060131145310.3946.53937.malonedeb@gangotri.ubuntu.com> Message-ID: <20060426002516.28852.77029.malone@gandwana.ubuntu.com> I have an Acer Travelmate C100. After upgrading to Dapper, it started suffering drive errors including stuff like: hda: timeout waiting for dma hda: drive not ready for command status=0x58 { DriveReady SeekComplete DataRequest } I thought my hard drive was failing, so I purchased a new 40GB Toshiba HD. I installed Dapper Flight 6 with ext3 and after my third boot up, half of my file system was somewhat gone, giving I/O errors when I tried to access certain utilities or files. I did an fsck, and found thousands of files in the lost+found. I re-installed with ReiserFS, and all went well for three days, but now I am again getting the errors: hda: timeout waiting for dma hda: drive not ready for command If the new hard drive isn't broken as well, I'm slightly annoyed at having prematurely replaced the original :) -- IBM X31 freeze under X, shortly after boot https://launchpad.net/bugs/30153 From tenshu at gmail.com Wed Apr 26 00:40:28 2006 From: tenshu at gmail.com (tenshu) Date: Wed, 26 Apr 2006 00:40:28 -0000 Subject: [Bug 30153] Re: IBM X31 freeze under X, shortly after boot References: <20060131145310.3946.53937.malonedeb@gangotri.ubuntu.com> Message-ID: <20060426004028.28879.11124.malone@gandwana.ubuntu.com> Sorry richard, but your comment had nothing to do here. This bug report is about IBM ThinkPad and "freeze under X, shortly after boot". You don't have a IBM you don't have problem with X. Please search if your bug had already been reported. If not please open a new one Tenshu -- IBM X31 freeze under X, shortly after boot https://launchpad.net/bugs/30153 From alan at tinypictures.us Wed Apr 26 01:12:47 2006 From: alan at tinypictures.us (alan.newberger) Date: Wed, 26 Apr 2006 01:12:47 -0000 Subject: [Bug 35215] Re: ipw3945 driver required for functionality on new Intel PRO/Wireless 3945ABG Mini-PCI Express Adapters References: <20060316173707.11105.89035.malonedeb@gandwana.ubuntu.com> Message-ID: <20060426011247.28852.91442.malone@gandwana.ubuntu.com> looks like you found a kernel Makefile edit to fix the ipw3945 symbol reference issue; FYI I used the following Makefile edit on the standalone ipw3945 package: http://sourceforge.net/mailarchive/message.php?msg_id=15376072 -- ipw3945 driver required for functionality on new Intel PRO/Wireless 3945ABG Mini-PCI Express Adapters https://launchpad.net/bugs/35215 From phillipc at toasterlogic.com Wed Apr 26 04:02:40 2006 From: phillipc at toasterlogic.com (Phillip Calvin) Date: Wed, 26 Apr 2006 04:02:40 -0000 Subject: [Bug 34508] Re: 2.6.15 kernel fails to boot on ppc machine References: <20060311210305.30082.75520.malonedeb@gandwana.ubuntu.com> Message-ID: <20060426040240.28879.64087.malone@gandwana.ubuntu.com> Working with the 2.6.15-20 kernel package, broken in 2.6.15-21 on a PowerMac G4 -- right now I'm typing "old" at yaboot to boot. -- 2.6.15 kernel fails to boot on ppc machine https://launchpad.net/bugs/34508 From adconrad at 0c3.net Wed Apr 26 05:58:49 2006 From: adconrad at 0c3.net (Adam Conrad) Date: Wed, 26 Apr 2006 05:58:49 -0000 Subject: [Bug 17497] Re: Does not support rev.B1 of DLink DWL-G650+ (missing firmware) References: <20060113135153.21012.79669.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060426055850.28852.2205.malone@gandwana.ubuntu.com> This should be fixed in dapper, with our new and comprehensive acx firmware collection. ** Changed in: Ubuntu Status: Unconfirmed => Fix Released -- Does not support rev.B1 of DLink DWL-G650+ (missing firmware) https://launchpad.net/bugs/17497 From joachim.beckers at belgacom.net Wed Apr 26 06:23:22 2006 From: joachim.beckers at belgacom.net (Joachim Beckers) Date: Wed, 26 Apr 2006 06:23:22 -0000 Subject: [Bug 26365] Re: Problem to sync or copy files with Ipod References: <20060113144911.21012.1421.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060426062322.28852.57492.malone@gandwana.ubuntu.com> Using dapper and kernel 2.6.15-21.32 I get the same error: Apr 26 07:26:48 localhost kernel: [4294942.547000] SCSI subsystem initialized Apr 26 07:26:48 localhost kernel: [4294942.561000] Initializing USB Mass Storage driver... Apr 26 07:26:48 localhost kernel: [4294942.562000] scsi0 : SCSI emulation for USB Mass Storage devices Apr 26 07:26:48 localhost kernel: [4294942.563000] usb-storage: device found at 6 Apr 26 07:26:48 localhost kernel: [4294942.563000] usb-storage: waiting for device to settle before scanning Apr 26 07:26:48 localhost kernel: [4294942.563000] usbcore: registered new driver usb-storage Apr 26 07:26:48 localhost kernel: [4294942.563000] USB Mass Storage support registered. Apr 26 07:26:53 localhost kernel: [4294947.564000] Vendor: Apple Model: iPod Rev: 1.62 Apr 26 07:26:53 localhost kernel: [4294947.564000] Type: Direct-Access ANSI SCSI revision: 00 Apr 26 07:26:53 localhost kernel: [4294947.568000] usb-storage: device scan complete Apr 26 07:26:53 localhost kernel: [4294947.591000] Driver 'sd' needs updating - please use bus_type methods Apr 26 07:26:53 localhost kernel: [4294947.595000] SCSI device sda: 78126047 512-byte hdwr sectors (40001 MB) Apr 26 07:26:53 localhost kernel: [4294947.596000] sda: Write Protect is off Apr 26 07:26:53 localhost kernel: [4294947.596000] sda: Mode Sense: 64 00 00 08 Apr 26 07:26:53 localhost kernel: [4294947.596000] sda: assuming drive cache: write through Apr 26 07:26:53 localhost kernel: [4294947.602000] SCSI device sda: 78126047 512-byte hdwr sectors (40001 MB) Apr 26 07:26:53 localhost kernel: [4294947.603000] sda: Write Protect is off Apr 26 07:26:53 localhost kernel: [4294947.603000] sda: Mode Sense: 64 00 00 08 Apr 26 07:26:53 localhost kernel: [4294947.603000] sda: assuming drive cache: write through Apr 26 07:26:53 localhost kernel: [4294947.604000] sda: sda1 sda2 Apr 26 07:26:53 localhost kernel: [4294947.670000] sd 0:0:0:0: Attached scsi removable disk sda Apr 26 07:26:53 localhost kernel: [4294947.682000] sd 0:0:0:0: Attached scsi generic sg0 type 0 Apr 26 07:45:43 localhost kernel: [4296077.966000] usb 4-3.6: reset high speed USB device using ehci_hcd and address 6 Apr 26 07:46:13 localhost kernel: [4296108.127000] usb 4-3.6: reset high speed USB device using ehci_hcd and address 6 Apr 26 07:46:23 localhost kernel: [4296118.291000] usb 4-3.6: reset high speed USB device using ehci_hcd and address 6 Apr 26 07:46:40 localhost kernel: [4296134.554000] usb 4-3.6: reset high speed USB device using ehci_hcd and address 6 Apr 26 07:46:40 localhost kernel: [4296134.715000] usb 4-3.6: reset high speed USB device using ehci_hcd and address 6 Apr 26 07:46:50 localhost kernel: [4296144.878000] usb 4-3.6: reset high speed USB device using ehci_hcd and address 6 Apr 26 07:46:50 localhost kernel: [4296144.964000] sd 0:0:0:0: scsi: Device offlined - not ready after error recovery Apr 26 07:46:50 localhost kernel: [4296144.964000] sd 0:0:0:0: SCSI error: return code = 0x50000 Apr 26 07:46:50 localhost kernel: [4296144.964000] end_request: I/O error, dev sda, sector 53903255 Apr 26 07:46:50 localhost kernel: [4296144.964000] Buffer I/O error on device sda2, logical block 53822930 Apr 26 07:46:50 localhost kernel: [4296144.964000] sd 0:0:0:0: rejecting I/O to offline device Apr 26 07:46:50 localhost kernel: [4296144.964000] Buffer I/O error on device sda2, logical block 53822931 Apr 26 07:46:50 localhost kernel: [4296144.964000] Buffer I/O error on device sda2, logical block 53822932 Apr 26 07:46:50 localhost kernel: [4296144.964000] Buffer I/O error on device sda2, logical block 53822933 Apr 26 07:46:50 localhost kernel: [4296144.964000] Buffer I/O error on device sda2, logical block 53822934 Apr 26 07:46:50 localhost kernel: [4296144.964000] Buffer I/O error on device sda2, logical block 53822935 Apr 26 07:46:50 localhost kernel: [4296144.964000] Buffer I/O error on device sda2, logical block 53822936 Apr 26 07:46:50 localhost kernel: [4296144.964000] Buffer I/O error on device sda2, logical block 53822937 Apr 26 07:46:50 localhost kernel: [4296144.964000] Buffer I/O error on device sda2, logical block 53822938 Apr 26 07:46:50 localhost kernel: [4296144.964000] Buffer I/O error on device sda2, logical block 53822939 Apr 26 07:46:50 localhost kernel: [4296144.964000] sd 0:0:0:0: rejecting I/O to offline device Apr 26 07:46:50 localhost last message repeated 2 times Apr 26 07:46:50 localhost kernel: [4296144.965000] sd 0:0:0:0: SCSI error: return code = 0x10000 Apr 26 07:46:50 localhost kernel: [4296144.965000] end_request: I/O error, dev sda, sector 53903383 Apr 26 07:46:50 localhost kernel: [4296144.965000] sd 0:0:0:0: rejecting I/O to offline device Apr 26 07:46:50 localhost kernel: [4296144.968000] FAT: FAT read failed (blocknr 52445) The last two lines are repeated more than 100 times. According to http://forums.debian.net/viewtopic.php?t=4338& this problem is resolved in linux 2.6.16-4. (I guess he means 2.6.16.4). Does that make it impossible to fix before dapper is released? -- Problem to sync or copy files with Ipod https://launchpad.net/bugs/26365 From ubuntu at web.expr42.net Wed Apr 26 07:26:41 2006 From: ubuntu at web.expr42.net (SebastianS) Date: Wed, 26 Apr 2006 07:26:41 -0000 Subject: [Bug 41440] kernel can't find sata disks on boot References: <20060426072641.28879.50257.malonedeb@gandwana.ubuntu.com> Message-ID: <20060426072641.28879.50257.malonedeb@gandwana.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 linux-image-2.6.15-21-686 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: after upgrading to dapper and thereby the 2.6.15-21 kernel on a x86 distribution and a machine with only sata disks. the machine panics quite quickly on boot as it can't find any root disks (sda1). I've seen no problems with this on machines with plain pata disks. this was testes lasts after an update/upgrade on tuesday the 25th on 18.00 UTC -- kernel can't find sata disks on boot https://launchpad.net/bugs/41440 From fabbione at ubuntu.com Wed Apr 26 07:45:26 2006 From: fabbione at ubuntu.com (Fabio Massimo Di Nitto) Date: Wed, 26 Apr 2006 07:45:26 -0000 Subject: [Bug 40286] Re: [ia64] OOPS when accessing /sys/class/misc/efirtc/uvent References: <20060420083030.8468.20650.malonedeb@gandwana.ubuntu.com> Message-ID: <20060426074527.28941.78467.malone@gangotri.ubuntu.com> the bug is in the kernel and needs to fixed there. udevplug just triggers it. probably the others are just fallout of this one. Fabio -- [ia64] OOPS when accessing /sys/class/misc/efirtc/uvent https://launchpad.net/bugs/40286 From fabbione at ubuntu.com Wed Apr 26 07:49:22 2006 From: fabbione at ubuntu.com (Fabio Massimo Di Nitto) Date: Wed, 26 Apr 2006 07:49:22 -0000 Subject: [Bug 40119] Re: SPARC boot failed: Illegal Instruction References: <20060419084429.8468.45532.malonedeb@gandwana.ubuntu.com> Message-ID: <20060426074922.28914.78836.malone@gangotri.ubuntu.com> Fabio: yes that image would do. Please try it. Patrick: please find a console cable to test or try to boot with -p option that should print more stuff. -- SPARC boot failed: Illegal Instruction https://launchpad.net/bugs/40119 From linux at strigen.com Wed Apr 26 08:13:54 2006 From: linux at strigen.com (Tor Harald Thorland) Date: Wed, 26 Apr 2006 08:13:54 -0000 Subject: [Bug 38608] Re: bmac workaround References: <20060407145719.32233.831.malonedeb@gandwana.ubuntu.com> Message-ID: <20060426081354.28852.34253.launchpad@gandwana.ubuntu.com> *** This bug is a duplicate of bug 35398 *** ** This bug has been marked a duplicate of bug 35398 bmac ethernet card not autodetected (no MODALIAS in uevent) -- bmac workaround https://launchpad.net/bugs/38608 From linux at strigen.com Wed Apr 26 08:13:54 2006 From: linux at strigen.com (Tor Harald Thorland) Date: Wed, 26 Apr 2006 08:13:54 -0000 Subject: [Bug 35398] Re: bmac ethernet card not autodetected (no MODALIAS in uevent) References: <20060317213039.26236.71408.malonedeb@gangotri.ubuntu.com> Message-ID: <20060426081354.28852.29023.launchpad@gandwana.ubuntu.com> ** Bug 38608 has been marked a duplicate of this bug -- bmac ethernet card not autodetected (no MODALIAS in uevent) https://launchpad.net/bugs/35398 From gianfranco.liporace at asl12.piemonte.it Wed Apr 26 08:26:05 2006 From: gianfranco.liporace at asl12.piemonte.it (Gianfranco Liporace) Date: Wed, 26 Apr 2006 08:26:05 -0000 Subject: [Bug 41191] Re: Can't find Volume Group to mount filesystem References: <20060424220015.13737.80676.malonedeb@gangotri.ubuntu.com> Message-ID: <20060426082605.28914.59622.malone@gangotri.ubuntu.com> I've a similar problem here, but the error message is a bit different: "ALERT! /dev/sda1 does not exists. Dropping to a shell!" I've a SCSI board and hard disk on my PC. The previous kernel works fine. -- Can't find Volume Group to mount filesystem https://launchpad.net/bugs/41191 From mikko.s.saarinen at mbnet.fi Wed Apr 26 08:25:49 2006 From: mikko.s.saarinen at mbnet.fi (Mikko Saarinen) Date: Wed, 26 Apr 2006 08:25:49 -0000 Subject: [Bug 35213] Re: hibernate fails when not on AC power on HP Pavilion ZT3000 - regression from breezy References: <20060316170910.6510.54248.malonedeb@gangotri.ubuntu.com> Message-ID: <20060426082549.28879.27612.malone@gandwana.ubuntu.com> I informed Bart Samwel of this bug. He is heavily involved with the development of laptop-mode. Let's see if he has any insight about this matter. -- hibernate fails when not on AC power on HP Pavilion ZT3000 - regression from breezy https://launchpad.net/bugs/35213 From fabbione at ubuntu.com Wed Apr 26 08:32:08 2006 From: fabbione at ubuntu.com (Fabio Massimo Di Nitto) Date: Wed, 26 Apr 2006 08:32:08 -0000 Subject: [Bug 40119] Re: SPARC boot failed: Illegal Instruction References: <20060419084429.8468.45532.malonedeb@gandwana.ubuntu.com> Message-ID: <20060426083208.28852.25109.malone@gandwana.ubuntu.com> it seems to be a silo problem. Netbooting should work just fine. Fabio ** Changed in: linux-source-2.6.15 (Ubuntu) Sourcepackagename: linux-source-2.6.15 => silo Assignee: Fabio Massimo Di Nitto => Ben Collins -- SPARC boot failed: Illegal Instruction https://launchpad.net/bugs/40119 From olive at deep-ocean.net Wed Apr 26 08:44:37 2006 From: olive at deep-ocean.net (Olivier Cortes) Date: Wed, 26 Apr 2006 08:44:37 -0000 Subject: [Bug 30153] Re: IBM X31 freeze under X, shortly after boot References: <20060131145310.3946.53937.malonedeb@gangotri.ubuntu.com> Message-ID: <20060426084437.28914.13081.malone@gangotri.ubuntu.com> Hi, After upgrading to 2.6.15-20-686 (2.6.15-20.30), the problem doesn't appear any more. I've been succesfully the 686 kernel on my X31 without any hang / freeze, either under X or console. No reboots, no data corruption any more. Haven't tested 2.6.15-21 though. Don't know what changed since 2.6.15-14 to resolve the problem, but i'm happy with 2.6.15-20. If you have a clue, i'm curious. I suggest this bug be closed, but i can't seem to find how to do this myself... Sorry for the blindness. Best regards to ubuntu kernel team. -- IBM X31 freeze under X, shortly after boot https://launchpad.net/bugs/30153 From tanarrifujitsu at optusnet.com.au Wed Apr 26 08:56:55 2006 From: tanarrifujitsu at optusnet.com.au (William Grant) Date: Wed, 26 Apr 2006 08:56:55 -0000 Subject: [Bug 41440] Re: kernel can't find sata disks on boot References: <20060426072641.28879.50257.malonedeb@gandwana.ubuntu.com> Message-ID: <20060426085655.28852.36368.malone@gandwana.ubuntu.com> We can't really do much about this bug without further information on the system that you are trying to run it on. Which chipset is the SATA controller? Which motherboard? ** Changed in: linux-source-2.6.15 linux-image-2.6.15-21-686 (Ubuntu) Status: Unconfirmed => Needs Info -- kernel can't find sata disks on boot https://launchpad.net/bugs/41440 From bart at samwel.tk Wed Apr 26 09:00:59 2006 From: bart at samwel.tk (Bart Samwel) Date: Wed, 26 Apr 2006 09:00:59 -0000 Subject: [Bug 35213] Re: hibernate fails when not on AC power on HP Pavilion ZT3000 - regression from breezy References: <20060316170910.6510.54248.malonedeb@gangotri.ubuntu.com> Message-ID: <20060426090059.28941.72054.malone@gangotri.ubuntu.com> Hi everybody, I've looked through the reports, and there were two things that drew my attention: * Hibernation happens as a result of ACPI lid events. laptop-mode-tools also registers an ACPI lid event and calls "/usr/sbin/laptop_mode auto" as a result. This may cause the hibernation and the laptop mode script to run in parallel. * Michael R. Head noticed that hibernation would take forever when the laptop was unplugged during hibernation. Again, unplugging the laptop triggers an ACPI event registered by laptop-mode-tools, which triggers "/usr/sbin/laptop_mode auto". Again, this may cause the hibernation and the laptop mode script to run in parallel. Apparently the running of "/usr/sbin/laptop_mode auto" during or close to hibernation is troublesome. I can imagine that this may be the case because it (a) calls lots of programs, and (b) twiddles with the hardware and with kernel settings. Perhpas some of the programs called by laptop mode don't like to be put in the freezer. Potential solution 1: disable the laptop-mode service during hibernation. Won't work because: laptop-mode-tools also listens on the lid event, and may therefore run _in parallel_ with the hibernation script. Potential solution 2: integrate the lid events of laptop-mode-tools and hibernate, so that laptop-mode-tools and hibernate are run serially. Then disable the laptop-mode service during hibernation as well. Solution (2) would probably work. -- hibernate fails when not on AC power on HP Pavilion ZT3000 - regression from breezy https://launchpad.net/bugs/35213 From tenshu at gmail.com Wed Apr 26 09:24:17 2006 From: tenshu at gmail.com (tenshu) Date: Wed, 26 Apr 2006 09:24:17 -0000 Subject: [Bug 30153] Re: IBM X31 freeze under X, shortly after boot References: <20060131145310.3946.53937.malonedeb@gangotri.ubuntu.com> Message-ID: <20060426092417.28879.39014.malone@gandwana.ubuntu.com> noticed the same here under 386 and 686-SMP close? -- IBM X31 freeze under X, shortly after boot https://launchpad.net/bugs/30153 From kalium at gmx.de Wed Apr 26 10:23:56 2006 From: kalium at gmx.de (Cinquero) Date: Wed, 26 Apr 2006 10:23:56 -0000 Subject: [Bug 30153] Re: IBM X31 freeze under X, shortly after boot References: <20060131145310.3946.53937.malonedeb@gangotri.ubuntu.com> Message-ID: <20060426102357.28852.447.malone@gandwana.ubuntu.com> http://forums.gentoo.org/viewtopic.php?p=3244362 -- IBM X31 freeze under X, shortly after boot https://launchpad.net/bugs/30153 From mikko.s.saarinen at mbnet.fi Wed Apr 26 10:41:03 2006 From: mikko.s.saarinen at mbnet.fi (Mikko Saarinen) Date: Wed, 26 Apr 2006 10:41:03 -0000 Subject: [Bug 35213] Re: hibernate fails when not on AC power on HP Pavilion ZT3000 - regression from breezy References: <20060316170910.6510.54248.malonedeb@gangotri.ubuntu.com> Message-ID: <20060426104103.28852.47192.malone@gandwana.ubuntu.com> Thank you Bart for such a quick reply =) I can confirm that hibernation through the menu works great, while the lid-close seems to hang. This also works when the menu is brought up by pressing the power button. Interestingly when the hibernation is initiated by the menu item, it doesn't trigger the screen locking of the gnome-screensaver. -- hibernate fails when not on AC power on HP Pavilion ZT3000 - regression from breezy https://launchpad.net/bugs/35213 From bart at samwel.tk Wed Apr 26 10:53:13 2006 From: bart at samwel.tk (Bart Samwel) Date: Wed, 26 Apr 2006 10:53:13 -0000 Subject: [Bug 35213] Re: [Bug 35213] Re: hibernate fails when not on AC power on HP Pavilion ZT3000 - regression from breezy References: <20060316170910.6510.54248.malonedeb@gangotri.ubuntu.com> <20060426104103.28852.47192.malone@gandwana.ubuntu.com> Message-ID: <444F5119.5030804@samwel.tk> Mikko Saarinen wrote: > Thank you Bart for such a quick reply =) > > I can confirm that hibernation through the menu works great, while the lid-close seems to hang. This also works when the menu is brought up by pressing the power button. OK. This means solution (2). Who is responsible for the lid response script, is that Matt Zimmerman? I've CC'ed him, perhaps he'll want to take a look at this as well. > Interestingly when the hibernation is initiated by the menu item, it doesn't trigger the screen locking of the gnome-screensaver. Hmmm. Perhaps the screen locking is implemented by the lid button response script and not by the hibernation per se? Cheers, Bart -- hibernate fails when not on AC power on HP Pavilion ZT3000 - regression from breezy https://launchpad.net/bugs/35213 From fgp at phlo.org Wed Apr 26 11:01:19 2006 From: fgp at phlo.org (Florian Pflug) Date: Wed, 26 Apr 2006 11:01:19 -0000 Subject: [Bug 41461] Missing PCI ID for ATI Radeon X600 PCIE (RV370) References: <20060426110119.28879.88868.malonedeb@gandwana.ubuntu.com> Message-ID: <20060426110119.28879.88868.malonedeb@gandwana.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 linux-image-2.6.15-21-686 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: Hi My Dell Optiplex GX620 came with an ATI Radeon X600, PCI-Express version. The kernel drm modules radeon.ko, however, doesn't know about this card. After adding it's vendor and device id to drm_pciids.h, the card is detected by radeon.ko, and the x.org "radeon" driver enables 3D acceleration. The line I added to drm_pciids.h is: {0x1002, 0x5B62, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV350} Please add this to the standard ubuntu kernels. greetings, Florian Pflug -- Missing PCI ID for ATI Radeon X600 PCIE (RV370) https://launchpad.net/bugs/41461 From tim at barlotta.net Wed Apr 26 11:39:06 2006 From: tim at barlotta.net (Tim) Date: Wed, 26 Apr 2006 11:39:06 -0000 Subject: [Bug 32751] Re: Include mh2 patch from bluez.org in future kernels References: <20060224171842.16580.17242.malonedeb@gandwana.ubuntu.com> Message-ID: <20060426113906.28914.30300.malone@gangotri.ubuntu.com> I can confirm this. I used the mh2 patch set on 2.6.15 for my Gentoo box with great success. Especially with my dinovo keyboard/mouse/media pad. I haven't been able to get this fully functional (auto connecting on reboot being the biggest problem). -- Include mh2 patch from bluez.org in future kernels https://launchpad.net/bugs/32751 From martin.bergner at online.de Wed Apr 26 12:01:59 2006 From: martin.bergner at online.de (Martin Bergner) Date: Wed, 26 Apr 2006 12:01:59 -0000 Subject: [Bug 35213] Re: hibernate fails when not on AC power on HP Pavilion ZT3000 - regression from breezy References: <20060316170910.6510.54248.malonedeb@gangotri.ubuntu.com> Message-ID: <20060426120159.28941.912.malone@gangotri.ubuntu.com> /etc/acpi/lid.sh is from acpi-support for which Matthew Garrett seems responsible, so I will suscribe him. -- hibernate fails when not on AC power on HP Pavilion ZT3000 - regression from breezy https://launchpad.net/bugs/35213 From _bert.rijsdijk at casema.nl Wed Apr 26 12:12:35 2006 From: _bert.rijsdijk at casema.nl (bert_3262) Date: Wed, 26 Apr 2006 12:12:35 -0000 Subject: [Bug 41061] Re: Boot failure on SCSI disk References: <20060424090127.17643.31977.malonedeb@gandwana.ubuntu.com> Message-ID: <20060426121235.28941.39556.malone@gangotri.ubuntu.com> kernel 2.6.15-21-686 has that problem to. Looking in the dmesg output is see the following error: aic7xxx: Unknown symbol spi_populate_sync_msg aic7xxx: Unknown symbol spi_populate_width_msg aic7xxx: Unknown symbol spi_populate_ppr_msg And when i compile the latest kernel-source, 2.6.15.6,-ubuntu1 it fails with error: drivers/built-in.o: In function `ahc_construct_sdtr':aic7xxx_core.c:(.text+0x61381): undefined reference to `spi_populate_sync_msg' drivers/built-in.o: In function `ahc_construct_wdtr':aic7xxx_core.c:(.text+0x61406): undefined reference to `spi_populate_width_msg' drivers/built-in.o: In function `ahc_construct_ppr':aic7xxx_core.c:(.text+0x6149f): undefined reference to `spi_populate_ppr_msg' -- Boot failure on SCSI disk https://launchpad.net/bugs/41061 From hez at truegeek.net Wed Apr 26 12:14:55 2006 From: hez at truegeek.net (Hezekiah Carty) Date: Wed, 26 Apr 2006 12:14:55 -0000 Subject: [Bug 35213] Re: hibernate fails when not on AC power on HP Pavilion ZT3000 - regression from breezy References: <20060316170910.6510.54248.malonedeb@gangotri.ubuntu.com> Message-ID: <20060426121455.28914.79530.malone@gangotri.ubuntu.com> I'm not entirely sure on this. I had this slow-hibernate problem on Dapper for a while, then it worked for a short while (acpi-support v0.72 I think, though I may be wrong), and last night when I went to hibernate my laptop by right-clicking on the Gnome Power Manager applet, the hibernation took more than 10 minutes. I did not try to close the lid during the hibernation, I just selected "hibernate" from the applet's right-click menu. -- hibernate fails when not on AC power on HP Pavilion ZT3000 - regression from breezy https://launchpad.net/bugs/35213 From mjg59 at codon.org.uk Wed Apr 26 12:19:26 2006 From: mjg59 at codon.org.uk (Matthew Garrett) Date: Wed, 26 Apr 2006 12:19:26 -0000 Subject: [Bug 35213] Re: hibernate fails when not on AC power on HP Pavilion ZT3000 - regression from breezy References: <20060316170910.6510.54248.malonedeb@gangotri.ubuntu.com> Message-ID: <20060426121926.28914.46565.malone@gangotri.ubuntu.com> laptop-mode-tools doesn't receive any acpi events under ubuntu. I'm still looking into this problem. -- hibernate fails when not on AC power on HP Pavilion ZT3000 - regression from breezy https://launchpad.net/bugs/35213 From j.quigley at serviomatic.com Wed Apr 26 12:20:58 2006 From: j.quigley at serviomatic.com (Jason Quigley) Date: Wed, 26 Apr 2006 12:20:58 -0000 Subject: [Bug 32751] Re: Include mh2 patch from bluez.org in future kernels References: <20060224171842.16580.17242.malonedeb@gandwana.ubuntu.com> Message-ID: <20060426122058.28852.94889.malone@gandwana.ubuntu.com> Everything is all working fine in the recent Dapper kernels. Thanks kernel guys! :-) -- Include mh2 patch from bluez.org in future kernels https://launchpad.net/bugs/32751 From ubuntu at paul.sladen.org Wed Apr 26 12:24:56 2006 From: ubuntu at paul.sladen.org (Paul Sladen) Date: Wed, 26 Apr 2006 12:24:56 -0000 Subject: [Bug 21558] Re: Thinkpad R31 requires 'i8042.nomux=1' on kernel commandline References: <20060113141328.21012.42496.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060426122456.28852.94366.malone@gandwana.ubuntu.com> I don't have working R31 hardware to test anymore; could you confirm if this "i8042.nomux=1" workaround went into the main kernel and close this bug if it did. -- Thinkpad R31 requires 'i8042.nomux=1' on kernel commandline https://launchpad.net/bugs/21558 From tim at barlotta.net Wed Apr 26 12:29:05 2006 From: tim at barlotta.net (Tim) Date: Wed, 26 Apr 2006 12:29:05 -0000 Subject: [Bug 32751] Re: Include mh2 patch from bluez.org in future kernels References: <20060224171842.16580.17242.malonedeb@gandwana.ubuntu.com> Message-ID: <20060426122905.28852.66086.malone@gandwana.ubuntu.com> I can confirm this second comment by Jason -- thanks Ubuntu devs. Realized after getting the kernel source and trying to apply the patch that it was already applied. I then realized I needed to modify /etc/default/bluez-utils. Setting HIDD_ENABLED to 1 (from the default 0). -- Include mh2 patch from bluez.org in future kernels https://launchpad.net/bugs/32751 From bart at samwel.tk Wed Apr 26 12:47:56 2006 From: bart at samwel.tk (Bart Samwel) Date: Wed, 26 Apr 2006 12:47:56 -0000 Subject: [Bug 35213] Re: [Bug 35213] Re: hibernate fails when not on AC power on HP Pavilion ZT3000 - regression from breezy References: <20060316170910.6510.54248.malonedeb@gangotri.ubuntu.com> <20060426121926.28914.46565.malone@gangotri.ubuntu.com> Message-ID: <444F6BFC.1070901@samwel.tk> Matthew Garrett wrote: > laptop-mode-tools doesn't receive any acpi events under ubuntu. I'm > still looking into this problem. Hmmm, that rules out interference of the laptop_mode script. It must be one of the kernel settings then. To check if it's the laptop_mode setting itself, can somebody try doing "cat 0 > /proc/sys/vm/laptop_mode" while laptop mode _is_ enabled, and then hibernate, and see if the problem still occurs? -- hibernate fails when not on AC power on HP Pavilion ZT3000 - regression from breezy https://launchpad.net/bugs/35213 From manuel.teira at telefonica.net Wed Apr 26 12:58:47 2006 From: manuel.teira at telefonica.net (Manuel Teira) Date: Wed, 26 Apr 2006 12:58:47 -0000 Subject: [Bug 41570] ipw2200 card is not working References: <20060426125847.28941.58505.malonedeb@gangotri.ubuntu.com> Message-ID: <20060426125847.28941.58505.malonedeb@gangotri.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 linux-image-2.6.15-21-686 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: On my Toshiba Satellite L20, centrino based laptop, wireless card is not longer working since updated to dapper (it worked under breezy). I'm using wep in my AP with 64 bits key length. It seems its not able to associate with the AP. Significant syslog messages are: [4294685.008000] ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection [4294685.010000] 8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004) [4294685.190000] ACPI: PCI Interrupt 0000:00:1e.2[A] -> GSI 17 (level, low) -> IRQ 169 [4294685.190000] PCI: Setting latency timer of device 0000:00:1e.2 to 64 [4294685.222000] ipw2200: Detected geography ZZM (11 802.11bg channels, 0 802.11a channels) ... [4294685.620000] ieee80211_crypt: registered algorithm 'WEP' ... [4294686.735000] eth1: NETDEV_TX_BUSY returned; driver should report queue full via ieee_device->is_queue_full. iwconfig returns: eth1 unassociated ESSID:"VIGO" Mode:Managed Channel=0 Access Point: Not-Associated Bit Rate=0 kb/s Tx-Power=20 dBm Sensitivity=8/0 Retry limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality:0 Signal level:0 Noise level:0 Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 and ifconfig eth1: eth1 Link encap:Ethernet HWaddr 00:13:CE:3D:CF:77 inet addr:172.26.0.3 Bcast:172.26.0.255 Mask:255.255.255.0 inet6 addr: fe80::213:ceff:fe3d:cf77/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1976 errors:0 dropped:0 overruns:0 frame:0 TX packets:2372 errors:0 dropped:0 overruns:0 carrier:1 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) Interrupt:169 Base address:0x8000 Memory:b0102000-b0102fff iwlist eth1 scan: mteira at piton:~$ iwlist eth1 scan eth1 Scan completed : Cell 01 - Address: 00:16:38:89:39:91 ESSID:"VIGO" Protocol:IEEE 802.11bg Mode:Master Channel:12 Encryption key:on Bit Rates:54 Mb/s Extra: Rates (Mb/s): 1 2 5.5 6 9 11 12 18 24 36 48 54 Quality=86/100 Signal level=-44 dBm Extra: Last beacon: 712ms ago Cell 02 - Address: 00:16:38:89:39:91 ESSID:"" Protocol:IEEE 802.11bg Mode:Master Channel:12 Encryption key:on Bit Rates:54 Mb/s Extra: Rates (Mb/s): 1 2 5.5 6 9 11 12 18 24 36 48 54 Quality=95/100 Signal level=-31 dBm Extra: Last beacon: 241ms ago -- ipw2200 card is not working https://launchpad.net/bugs/41570 From milo_casagrande at yahoo.it Wed Apr 26 13:01:27 2006 From: milo_casagrande at yahoo.it (MiloCasagrande) Date: Wed, 26 Apr 2006 13:01:27 -0000 Subject: [Bug 16196] Re: ACPI half works on ASUS L4500R References: <20060113134516.21012.60183.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060426130127.28852.83203.malone@gandwana.ubuntu.com> Update to Beta, ACPI still doesn't work: - if I boot with ACPI=OFF I can use the backlight and brightness switches; - else they don't work. -- ACPI half works on ASUS L4500R https://launchpad.net/bugs/16196 From milo_casagrande at yahoo.it Wed Apr 26 13:02:36 2006 From: milo_casagrande at yahoo.it (MiloCasagrande) Date: Wed, 26 Apr 2006 13:02:36 -0000 Subject: [Bug 24153] Re: ACPI on ASUS L4500R doesn't work, the CPU frequency scaling works, battery and backlight switch don't References: <20060113142735.21012.49495.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060426130237.28852.98636.malone@gandwana.ubuntu.com> Updated to beta, but still the same: - booting with ACPI=OFF I can use the backlight and brightness switches - else they don't work Frequency always work. -- ACPI on ASUS L4500R doesn't work, the CPU frequency scaling works, battery and backlight switch don't https://launchpad.net/bugs/24153 From phopfgartner at gmail.com Wed Apr 26 13:31:16 2006 From: phopfgartner at gmail.com (Peter Hopfgartner) Date: Wed, 26 Apr 2006 13:31:16 -0000 Subject: [Bug 41576] Can not load aic7xxx References: <20060426131919.28879.27225.malonedeb@gandwana.ubuntu.com> Message-ID: <20060426133116.28852.88144.launchpad@canonical@gandwana.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 linux-image-686 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: When I try to: modprobe aic7xxx I get: FATAL: Error inserting aic7xxx (/lib/modules/2.6.15-21-686/kernel/drivers/scsi/aic7xxx/aic7xxx.ko): Unknown symbol in module, or unknown parameter (see dmesg) The relevant lines in the dmesg are: [ 3204.690383] aic7xxx: Unknown symbol spi_populate_sync_msg [ 3204.693334] aic7xxx: Unknown symbol spi_populate_width_msg [ 3204.694644] aic7xxx: Unknown symbol spi_populate_ppr_msg Note: the original reporter indicated the bug was in package 'linux-image-2.6'; however, that package was not published in Ubuntu. -- Can not load aic7xxx https://launchpad.net/bugs/41576 From phopfgartner at gmail.com Wed Apr 26 13:29:49 2006 From: phopfgartner at gmail.com (Peter Hopfgartner) Date: Wed, 26 Apr 2006 13:29:49 -0000 Subject: [Bug 41576] Re: Can not load aic7xxx References: <20060426131919.28879.27225.malonedeb@gandwana.ubuntu.com> Message-ID: <20060426132949.28852.47688.malone@gandwana.ubuntu.com> Is probably the same issue as #41365, sorry for the inconvenience -- Can not load aic7xxx https://launchpad.net/bugs/41576 From phopfgartner at gmail.com Wed Apr 26 13:26:16 2006 From: phopfgartner at gmail.com (Peter Hopfgartner) Date: Wed, 26 Apr 2006 13:26:16 -0000 Subject: [Bug 41576] Re: Can not load aic7xxx References: <20060426131919.28879.27225.malonedeb@gandwana.ubuntu.com> Message-ID: <20060426132616.28914.94943.malone@gangotri.ubuntu.com> Package is linux-image-2.6.15-21-686. The module loaded ok until version 19 or 20, whatever I had bofore upgrading today. -- Can not load aic7xxx https://launchpad.net/bugs/41576 From tfheen at canonical.com Wed Apr 26 13:27:34 2006 From: tfheen at canonical.com (Tollef Fog Heen) Date: Wed, 26 Apr 2006 13:27:34 -0000 Subject: [Bug 21790] Re: Reduced I/O performance when logged into GNOME References: <20060113141445.21012.39125.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060426132734.28914.43785.malone@gangotri.ubuntu.com> As nobody has complained about this lately and the numbers in the end of the bug report suggest we now have "good" numbers again, I'm marking this as fixed. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Needs Info => Fix Released -- Reduced I/O performance when logged into GNOME https://launchpad.net/bugs/21790 From samtygier at yahoo.co.uk Wed Apr 26 13:31:15 2006 From: samtygier at yahoo.co.uk (sam tygier) Date: Wed, 26 Apr 2006 13:31:15 -0000 Subject: [Bug 41576] Re: Can not load aic7xxx References: <20060426131919.28879.27225.malonedeb@gandwana.ubuntu.com> Message-ID: <20060426133115.28852.92690.malone@gandwana.ubuntu.com> changed source package name to linux-source-2.6.15 to get the right people to see it ** Changed in: linux-image-686 (Ubuntu) Sourcepackagename: None => linux-source-2.6.15 -- Can not load aic7xxx https://launchpad.net/bugs/41576 From dennis at kaarsemaker.net Wed Apr 26 13:49:01 2006 From: dennis at kaarsemaker.net (Dennis Kaarsemaker) Date: Wed, 26 Apr 2006 13:49:01 -0000 Subject: [Bug 23787] Re: Wrong firmware loaded for acx_pci References: <20060113142541.21012.73152.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060426134901.28879.7404.malone@gandwana.ubuntu.com> acx_pci should work out of the box in dapper, can anyone confirm/deny? -- Wrong firmware loaded for acx_pci https://launchpad.net/bugs/23787 From mathieu.perona at ens.fr Wed Apr 26 13:52:13 2006 From: mathieu.perona at ens.fr (Mathieu Perona) Date: Wed, 26 Apr 2006 13:52:13 -0000 Subject: [Bug 30144] Re: kernel oops related to Wifi event References: <20060131111818.26234.41237.malonedeb@gangotri.ubuntu.com> Message-ID: <20060426135213.28914.42961.malone@gangotri.ubuntu.com> Should be, indeed. But I cannot help you : I have the same problem with another computer (under Dapper), but the computer just freezes immediatly, with no output on /var/log/kern. -- kernel oops related to Wifi event https://launchpad.net/bugs/30144 From avilella at gmail.com Wed Apr 26 14:02:52 2006 From: avilella at gmail.com (Albert Vilella) Date: Wed, 26 Apr 2006 14:02:52 -0000 Subject: [Bug 37164] Re: sky2 ethernet driver problems References: <20060329134103.6279.17661.malonedeb@gandwana.ubuntu.com> Message-ID: <20060426140252.28941.38948.malone@gangotri.ubuntu.com> I had another crash while doing a "sudo dhclient". This: ---- bogus UDP packet length: 328 bogus UDP packet length: 328 bogus UDP packet length: 328 bogus UDP packet length: 328 ---- Appeared in the screen just before the crash. I am using 2.6.15.20 kernel: Linux magneto 2.6.15-20-686 #1 SMP PREEMPT Tue Apr 4 18:37:00 UTC 2006 i686 GNU/Linux -- sky2 ethernet driver problems https://launchpad.net/bugs/37164 From dennis at kaarsemaker.net Wed Apr 26 14:00:59 2006 From: dennis at kaarsemaker.net (Dennis Kaarsemaker) Date: Wed, 26 Apr 2006 14:00:59 -0000 Subject: [Bug 36238] Re: madwifi + wpa-psk auth + dhcp is not working References: <20060323173736.17616.7142.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060426140059.28852.97925.malone@gandwana.ubuntu.com> This is definietly fixed in dapper. ** Changed in: Ubuntu Status: Unconfirmed => Fix Released -- madwifi + wpa-psk auth + dhcp is not working https://launchpad.net/bugs/36238 From avilella at gmail.com Wed Apr 26 14:17:46 2006 From: avilella at gmail.com (Albert Vilella) Date: Wed, 26 Apr 2006 14:17:46 -0000 Subject: [Bug 38865] Re: sky2 driver freezing system after ifdown and ifup References: <20060409125752.32313.97119.malonedeb@gandwana.ubuntu.com> Message-ID: <20060426141746.28941.25799.malone@gangotri.ubuntu.com> This is also happening to me. I had another crash while doing a "sudo dhclient". This: ---- bogus UDP packet length: 328 bogus UDP packet length: 328 bogus UDP packet length: 328 bogus UDP packet length: 328 ---- Appeared in the screen just before the crash. I am using 2.6.15.20 kernel: Linux magneto 2.6.15-20-686 #1 SMP PREEMPT Tue Apr 4 18:37:00 UTC 2006 i686 GNU/Linux -- sky2 driver freezing system after ifdown and ifup https://launchpad.net/bugs/38865 From gary at lyranthe.org Wed Apr 26 14:25:12 2006 From: gary at lyranthe.org (Gary Coady) Date: Wed, 26 Apr 2006 14:25:12 -0000 Subject: [Bug 40071] Re: linux-image-* will happily install even if /boot fills up in the process References: <20060418220553.8468.65002.malonedeb@gandwana.ubuntu.com> Message-ID: <20060426142512.28879.22445.launchpad@gandwana.ubuntu.com> ** Bug 41575 has been marked a duplicate of this bug -- linux-image-* will happily install even if /boot fills up in the process https://launchpad.net/bugs/40071 From gary at lyranthe.org Wed Apr 26 14:25:33 2006 From: gary at lyranthe.org (Gary Coady) Date: Wed, 26 Apr 2006 14:25:33 -0000 Subject: [Bug 41575] Re: install screw-up on disk space errors References: <20060426131640.28941.91842.malonedeb@gangotri.ubuntu.com> Message-ID: <20060426142533.28914.6226.malone@gangotri.ubuntu.com> *** This bug is a duplicate of bug 40071 *** Thanks for the bug report. This particular bug has already been reported into our bug tracking system, but please feel free to report any further bugs which you find. ** This bug has been marked a duplicate of bug 40071 linux-image-* will happily install even if /boot fills up in the process -- install screw-up on disk space errors https://launchpad.net/bugs/41575 From murrayc at murrayc.com Wed Apr 26 14:35:31 2006 From: murrayc at murrayc.com (Murray Cumming) Date: Wed, 26 Apr 2006 14:35:31 -0000 Subject: [Bug 30325] Acer Travelmate 4101WLMI needs noapic References: <20060202151309.16133.25702.malonedeb@gangotri.ubuntu.com> Message-ID: <20060426143531.28879.36494.launchpad@canonical@gandwana.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Fix Released Description: My Travelmate 4101WLMI (915GM graphics version) laptop does not boot (or install) without the noapic option. Colin Watson recommended that I file a bug with the output of ’sudo dmidecode’, saying "it may eventually be possible to blacklist APIC interrupt routing on your laptop." -- Acer Travelmate 4101WLMI needs noapic https://launchpad.net/bugs/30325 From cjwatson at canonical.com Wed Apr 26 14:35:31 2006 From: cjwatson at canonical.com (Colin Watson) Date: Wed, 26 Apr 2006 14:35:31 -0000 Subject: [Bug 30325] Re: Acer Travelmate 4101WLMI needs noapic References: <20060202151309.16133.25702.malonedeb@gangotri.ubuntu.com> Message-ID: <20060426143531.28879.35007.malone@gandwana.ubuntu.com> The reporter confirmed in https://launchpad.net/distros/ubuntu/+ticket/338 that this bug is fixed. I suspect that it's in fact another manifestation of bug 35795. ** Changed in: Ubuntu Sourcepackagename: None => linux-source-2.6.15 Status: Confirmed => Fix Released -- Acer Travelmate 4101WLMI needs noapic https://launchpad.net/bugs/30325 From andrew.bennetts at canonical.com Wed Apr 26 14:55:14 2006 From: andrew.bennetts at canonical.com (Andrew Bennetts) Date: Wed, 26 Apr 2006 14:55:14 -0000 Subject: [Bug 35098] Re: Using headphone jack on stac9xxx codecs (HDA) doesn't disable speakers References: <20060315193931.6537.15347.malonedeb@gangotri.ubuntu.com> Message-ID: <20060426145514.28852.98186.malone@gandwana.ubuntu.com> As of linux-image-2.6.15-21-686 this is now working perfectly for me on my Dell Inspiron 630m. Thanks! -- Using headphone jack on stac9xxx codecs (HDA) doesn't disable speakers https://launchpad.net/bugs/35098 From launchpad at groovix.com Wed Apr 26 15:16:09 2006 From: launchpad at groovix.com (Michael Pardee) Date: Wed, 26 Apr 2006 15:16:09 -0000 Subject: [Bug 35213] Re: hibernate fails when not on AC power on HP Pavilion ZT3000 - regression from breezy References: <20060316170910.6510.54248.malonedeb@gangotri.ubuntu.com> Message-ID: <20060426151609.28852.97843.malone@gandwana.ubuntu.com> The slow hibernate on battery is also problem on both the MSI 1013 and 1029 laptops using the latest dapper updates (S270 and M635 retail models) Disabling laptop mode in both /etc/default/acpi-support and /etc/laptop-mode/laptop-mode.conf had no effect. Is the problem really laptop-mode or could something else cause this symptom? I might try disabling laptop-mode in the kernel. -- hibernate fails when not on AC power on HP Pavilion ZT3000 - regression from breezy https://launchpad.net/bugs/35213 From launchpad at groovix.com Wed Apr 26 15:25:41 2006 From: launchpad at groovix.com (Michael Pardee) Date: Wed, 26 Apr 2006 15:25:41 -0000 Subject: [Bug 35213] Re: hibernate fails when not on AC power on HP Pavilion ZT3000 - regression from breezy References: <20060316170910.6510.54248.malonedeb@gangotri.ubuntu.com> Message-ID: <20060426152541.28879.57318.malone@gandwana.ubuntu.com> ...sorry, my last post was a dup due to a page refresh.. >> can somebody try doing "cat 0 > /proc/sys/vm/laptop_mode" while laptop mode _is_ enabled How is that different than "laptop_mode stop"? In any case, "laptop_mode start; echo 0 > /proc/sys/vm/laptop_mode" doesn't change anything, same problem. I usually check laptop_mode status before hibernation, and having it disabled, removing /var/run/laptop-mode-enabled, etc. doesn't help. -- hibernate fails when not on AC power on HP Pavilion ZT3000 - regression from breezy https://launchpad.net/bugs/35213 From t.harley at laposte.net Wed Apr 26 15:34:42 2006 From: t.harley at laposte.net (Topper) Date: Wed, 26 Apr 2006 15:34:42 -0000 Subject: [Bug 41365] Re: aic7xxx (scsi) not working in kernel 2.6.15-21 References: <20060425194938.28852.50280.malonedeb@gandwana.ubuntu.com> Message-ID: <20060426153442.28914.31841.malone@gangotri.ubuntu.com> This is probably a duplicate of bug #41061 -- aic7xxx (scsi) not working in kernel 2.6.15-21 https://launchpad.net/bugs/41365 From t.harley at laposte.net Wed Apr 26 15:35:23 2006 From: t.harley at laposte.net (Topper) Date: Wed, 26 Apr 2006 15:35:23 -0000 Subject: [Bug 41576] Re: Can not load aic7xxx References: <20060426131919.28879.27225.malonedeb@gandwana.ubuntu.com> Message-ID: <20060426153523.28941.48069.malone@gangotri.ubuntu.com> Probably a duplicate of bug #41061 -- Can not load aic7xxx https://launchpad.net/bugs/41576 From t.harley at laposte.net Wed Apr 26 15:37:10 2006 From: t.harley at laposte.net (Topper) Date: Wed, 26 Apr 2006 15:37:10 -0000 Subject: [Bug 41440] Re: kernel can't find sata disks on boot References: <20060426072641.28879.50257.malonedeb@gandwana.ubuntu.com> Message-ID: <20060426153711.28852.60713.malone@gandwana.ubuntu.com> Check if not a duplicate of bug #41061 -- kernel can't find sata disks on boot https://launchpad.net/bugs/41440 From crimsun at fungus.sh.nu Wed Apr 26 15:51:03 2006 From: crimsun at fungus.sh.nu (Daniel T. Chen) Date: Wed, 26 Apr 2006 15:51:03 -0000 Subject: [Bug 35098] Re: Using headphone jack on stac9xxx codecs (HDA) doesn't disable speakers References: <20060315193931.6537.15347.malonedeb@gangotri.ubuntu.com> Message-ID: <20060426155103.28941.71103.launchpad@gangotri.ubuntu.com> ** Changed in: linux-source-2.6.15 (Ubuntu) Status: In Progress => Fix Released -- Using headphone jack on stac9xxx codecs (HDA) doesn't disable speakers https://launchpad.net/bugs/35098 From bddebian at comcast.net Wed Apr 26 16:41:29 2006 From: bddebian at comcast.net (Barry deFreese) Date: Wed, 26 Apr 2006 16:41:29 -0000 Subject: [Bug 28833] Re: Dapper 3: problem w/ USB devices References: <20060117223914.20195.11185.malonedeb@gandwana.ubuntu.com> Message-ID: <20060426164130.28852.27635.launchpad@gandwana.ubuntu.com> ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Unconfirmed => Confirmed -- Dapper 3: problem w/ USB devices https://launchpad.net/bugs/28833 From mr_faber at gmx.net Wed Apr 26 16:47:13 2006 From: mr_faber at gmx.net (MrFaber) Date: Wed, 26 Apr 2006 16:47:13 -0000 Subject: [Bug 36014] Re: kernel 686 can't scale cpu frequency References: <20060322140248.30471.37870.malonedeb@gangotri.ubuntu.com> Message-ID: <20060426164714.28852.24738.malone@gandwana.ubuntu.com> With new kernel version 21 scaling doesn't work with any kernel (386 and 686). -- kernel 686 can't scale cpu frequency https://launchpad.net/bugs/36014 From e-rebus at hotmail.com Wed Apr 26 16:47:47 2006 From: e-rebus at hotmail.com (e-rebus) Date: Wed, 26 Apr 2006 16:47:47 -0000 Subject: [Bug 32752] Re: Dell PERC 2/SC (AMI Megaraid 466(?)) not working References: <20060224172951.27067.39784.malonedeb@gangotri.ubuntu.com> Message-ID: <20060426164747.28852.1652.malone@gandwana.ubuntu.com> Have the same problem with Dell PowerEdge 1300 and Perc2/SC RAID controller. Neither Breezy nor Dapper can see the RAID array during installation. However it it woring fine with Hoary with 2.6.10 kernel as well as custom compiled 2.6.16 kernel. I can upgrade from Horay to Breezy, but no luck with fresh install. -- Dell PERC 2/SC (AMI Megaraid 466(?)) not working https://launchpad.net/bugs/32752 From phibxr at gmail.com Wed Apr 26 17:31:43 2006 From: phibxr at gmail.com (phibxr) Date: Wed, 26 Apr 2006 17:31:43 -0000 Subject: [Bug 34508] Re: 2.6.15 kernel fails to boot on ppc machine References: <20060311210305.30082.75520.malonedeb@gandwana.ubuntu.com> Message-ID: <20060426173143.28941.22048.malone@gangotri.ubuntu.com> I don't think any release should hit beta with a bug like this still in. I'll be trying a daily again today. -- 2.6.15 kernel fails to boot on ppc machine https://launchpad.net/bugs/34508 From santo_prive at yahoo.com Wed Apr 26 17:49:22 2006 From: santo_prive at yahoo.com (santo) Date: Wed, 26 Apr 2006 17:49:22 -0000 Subject: [Bug 41373] Re: High basal cpu load on 686 but not 386 kernel References: <20060425203132.28879.58237.malonedeb@gandwana.ubuntu.com> Message-ID: <20060426174922.28879.43816.malone@gandwana.ubuntu.com> I can confirm this. As hvbakel mentioned, please refer to http://www.ubuntuforums.org/showthread.php?t=165742 for more details My system is Ubuntu Dapper (with kubuntu-desktop installed afterwards) on a Dell Inspiron 9300 -- High basal cpu load on 686 but not 386 kernel https://launchpad.net/bugs/41373 From launchpad at prometoys.net Wed Apr 26 18:07:07 2006 From: launchpad at prometoys.net (Keywan Najafi Tonekaboni) Date: Wed, 26 Apr 2006 18:07:07 -0000 Subject: [Bug 41626] deactivate touchpad while sleep References: <20060426173129.28914.80016.malonedeb@gangotri.ubuntu.com> Message-ID: <20060426180707.28914.65588.launchpad@canonical@gangotri.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: on ibooks G4 (latest modell/june2005) there is a problem with the usb touchpad. If you use the mousebutton while the iBook is in suspend2ram (aka sleep), after awaking the touchpad didn't work until reload (with rmmod/modprobe) ohci_hcd. After this, the touchpad is recognized as an usb mouse and ist too fast and the cool synaptics features like 2 -finger-tap and scroll on the right edge didn't work anymore. Is it possible to deactivate the touchpad, while it's on sleep. So the kernel (or whatever) ignore every event from the touchpad. (you push the mousebutton also when the lid is pressed on the case, e.g. a narrow full backpack) Apple does this in mac os x. You cant wake up the iBook with the touchpad button in macosx. -- deactivate touchpad while sleep https://launchpad.net/bugs/41626 From lietuvis at gmail.com Wed Apr 26 18:11:32 2006 From: lietuvis at gmail.com (mula) Date: Wed, 26 Apr 2006 18:11:32 -0000 Subject: [Bug 41612] Gdm can't wake up after suspension References: <20060426163245.28941.81217.malonedeb@gangotri.ubuntu.com> Message-ID: <20060426181132.28879.70557.launchpad@canonical@gandwana.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: I have an IBM Thinkpad R50e. More than a week ago, I didn't have the problem but after an update, it started to make me nervous. Distribution: Ubuntu Dapper Beta. GDM version - 2.14.0. I have also Intel Exreme Graphics 2 integrated. I followed these instructions to have my laptop suspended: http://www.thinkwiki.org/wiki/Installing_Ubuntu_on_a_ThinkPad_R50e Now, I can suspend it successfully but I am not able to wake it up. /var/log/syslog gives the information that I pasted into the pastebin: http://paste.ubuntu-nl.org/12932 -- Gdm can't wake up after suspension https://launchpad.net/bugs/41612 From fab at gnux.info Wed Apr 26 18:08:22 2006 From: fab at gnux.info (fab) Date: Wed, 26 Apr 2006 18:08:22 -0000 Subject: [Bug 41634] Network card stops working (sky2) References: <20060426180822.28879.46051.malonedeb@gandwana.ubuntu.com> Message-ID: <20060426180822.28879.46051.malonedeb@gandwana.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 linux-image-2.6.15-21-386 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: I own a medion laptop with this network card: 0000:02:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8036 Fast Ethernet Controller (rev 10) Subsystem: Rioworks Marvell 88E8036 Fast Ethernet Controller (Arima) The newest module "sky2" never worked well, during intensive use, I get messages like: [4333218.921000] NETDEV WATCHDOG: eth1: transmit timed out [4333218.921000] sky2 eth1: tx timeout [4333218.921000] sky2 eth1: transmit ring 406 .. 383 report=406 done=406 [4333218.921000] sky2 hardware hung? flushing and the card stops working, I just need to rmmod and modprobe it again waiting for the next hangup. With kernels 2.6.15-17 and older I just used the sk98lin module which works perfectly (If I use the latest version, from http://www.marvell.com/drivers/driverDisplay.do?dId=107&pId=10). But with newer kernels I'm unable to compile it and the builtins drivers aren't working well. -- Network card stops working (sky2) https://launchpad.net/bugs/41634 From samtygier at yahoo.co.uk Wed Apr 26 18:07:07 2006 From: samtygier at yahoo.co.uk (sam tygier) Date: Wed, 26 Apr 2006 18:07:07 -0000 Subject: [Bug 41626] Re: deactivate touchpad while sleep References: <20060426173129.28914.80016.malonedeb@gangotri.ubuntu.com> Message-ID: <20060426180707.28914.46369.launchpad@gangotri.ubuntu.com> ** Changed in: linux-source (Ubuntu) Sourcepackagename: linux-source => linux-source-2.6.15 -- deactivate touchpad while sleep https://launchpad.net/bugs/41626 From launchpad at groovix.com Wed Apr 26 18:07:23 2006 From: launchpad at groovix.com (Michael Pardee) Date: Wed, 26 Apr 2006 18:07:23 -0000 Subject: [Bug 35213] Re: hibernate fails when not on AC power on HP Pavilion ZT3000 - regression from breezy References: <20060316170910.6510.54248.malonedeb@gangotri.ubuntu.com> Message-ID: <20060426180723.28879.36634.malone@gandwana.ubuntu.com> This appears to prevent the slow hibernation while on battery problem: apt-get remove laptop-mode-tools (which will also remove due to dependencies: acpi-support gnome-power-manager laptop-mode-tools powermanagement-interface ubuntu-desktop) Of course, without some of those other packages there are other problems (like the network not coming back up correctly) DEBUGGING TIP: if you change your kernel parameters to remove quiet and splash and add vga=normal, and in /etc/default/acpi-support you set USE_DPMS=false then you should be able to see your notebook's status while hibernating including a % of pages written to memory so you know if hibernation is hung or just really slow (can take up to 30 minutes sometimes) -- hibernate fails when not on AC power on HP Pavilion ZT3000 - regression from breezy https://launchpad.net/bugs/35213 From daniel.holbach at ubuntu.com Wed Apr 26 18:11:31 2006 From: daniel.holbach at ubuntu.com (Daniel Holbach) Date: Wed, 26 Apr 2006 18:11:31 -0000 Subject: [Bug 41612] Re: Gdm can't wake up after suspension References: <20060426163245.28941.81217.malonedeb@gangotri.ubuntu.com> Message-ID: <20060426181132.28879.27132.malone@gandwana.ubuntu.com> This looks more of a kernel problem to me. Which version of the kernel do you have installed? ** Changed in: gdm (Ubuntu) Sourcepackagename: gdm => linux-source-2.6.15 -- Gdm can't wake up after suspension https://launchpad.net/bugs/41612 From mdz at ubuntu.com Wed Apr 26 18:34:40 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Wed, 26 Apr 2006 18:34:40 -0000 Subject: [Bug 37472] Re: the keyboard don't work perfectly on laptops acer travelmate 2300 series with Dapper References: <20060331122206.23707.692.malonedeb@gandwana.ubuntu.com> Message-ID: <20060426183440.28879.77065.malone@gandwana.ubuntu.com> This report is very unclear. Do you have problems outside of X or not? Can anyone confirm which version of the kernel introduced this regression? ** Changed in: linux-source-2.6.15 (Ubuntu) Assignee: Mohammed => (unassigned) -- the keyboard don't work perfectly on laptops acer travelmate 2300 series with Dapper https://launchpad.net/bugs/37472 From dr.frog at shaw.ca Wed Apr 26 18:41:58 2006 From: dr.frog at shaw.ca (dr frog) Date: Wed, 26 Apr 2006 18:41:58 -0000 Subject: [Bug 40998] Re: ati x1400 References: <20060423225444.4079.41877.malonedeb@gangotri.ubuntu.com> Message-ID: <20060426184158.28879.45752.malone@gandwana.ubuntu.com> um tried the daily ubuntu 'live' DVD and still not able to load this ati lspci still says its an unknown card -- ati x1400 https://launchpad.net/bugs/40998 From webmaster at mikeasoft.com Wed Apr 26 18:43:34 2006 From: webmaster at mikeasoft.com (Michael Sheldon) Date: Wed, 26 Apr 2006 18:43:34 -0000 Subject: [Bug 37472] Re: the keyboard don't work perfectly on laptops acer travelmate 2300 series with Dapper References: <20060331122206.23707.692.malonedeb@gandwana.ubuntu.com> Message-ID: <20060426184334.28879.44214.malone@gandwana.ubuntu.com> There are minor problems outside of X (occassional key skips), and major problems inside X (frequent key skips, key repeats). The problems inside X only occur with Dapper (using both 2.6.15 and 2.6.12), the problems outside of X occur under both 2.6.15 and 2.6.12. -- the keyboard don't work perfectly on laptops acer travelmate 2300 series with Dapper https://launchpad.net/bugs/37472 From anthony_guichard at hotmail.fr Wed Apr 26 18:50:30 2006 From: anthony_guichard at hotmail.fr (Louis XVI with a gun) Date: Wed, 26 Apr 2006 18:50:30 -0000 Subject: [Bug 37472] RE: [Bug 37472] Re: the keyboard don't work perfectly on laptops acertravelmate References: <20060331122206.23707.692.malonedeb@gandwana.ubuntu.com> <20060426183440.28879.77065.malone@gandwana.ubuntu.com> Message-ID: I have this problem with a kernel 2.6.19 but with the dapper flight 4, without updating the installed operating system from the cd, I didn ' t have this keyboard problem. _________________________________________________________________ MSN Messenger: appels gratuits de PC à PC ! http://www.msn.fr/msger/default.asp -- the keyboard don't work perfectly on laptops acer travelmate 2300 series with Dapper https://launchpad.net/bugs/37472 From mdz at ubuntu.com Wed Apr 26 19:09:32 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Wed, 26 Apr 2006 19:09:32 -0000 Subject: [Bug 19196] Re: Mysterious NFS mount timeouts References: <20060113140022.21012.71952.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060426190932.28852.31744.malone@gandwana.ubuntu.com> Is this still a pressing issue in Breezy, justifying a backport? If so, please go ahead, otherwise it can wait for the Dapper release, which is not far off now. -- Mysterious NFS mount timeouts https://launchpad.net/bugs/19196 From launchpad at groovix.com Wed Apr 26 19:17:03 2006 From: launchpad at groovix.com (Michael Pardee) Date: Wed, 26 Apr 2006 19:17:03 -0000 Subject: [Bug 35213] Re: hibernate fails when not on AC power on HP Pavilion ZT3000 - regression from breezy References: <20060316170910.6510.54248.malonedeb@gangotri.ubuntu.com> Message-ID: <20060426191704.28852.21681.malone@gandwana.ubuntu.com> Here is a new easier workaround without removing all those packages (or using dpkg --force-all -r laptop-mode-tools, which will cause dependency problems later): sudo mv /usr/sbin/laptop_mode /usr/sbin/laptop_mode.disabled (of course upgrading to a new laptop-mode-tools package will put that file back into place, but hopefully it contains a fix for this by then) Looking at that script, even when laptop mode is turned off in the config files it still writes some information to /proc/sys/... to shut laptop mode off, and I suspect that somehow that is screwing up the kernel/hard drive during hibernation writing. So, we have two problems here: problem #1-- laptop mode screws things up even when it is completely "disabled" in config files or "stopped" . A quick fix for this would be to check if laptop-mode was never enabled and if not, do nothing for the "stop" action instead of "Adjusting 2.6 kernel parameters to disable laptop mode." (line 1038) problem #2-- enabling laptop mode causes extremely slow hard drive writing during battery powered hibernation. This sounds like it could be a lot harder to fix. I won't be delving into this any further for a while, but I'd be happy to do more testing if there is a fix. -- hibernate fails when not on AC power on HP Pavilion ZT3000 - regression from breezy https://launchpad.net/bugs/35213 From ubuntu at web.expr42.net Wed Apr 26 20:01:08 2006 From: ubuntu at web.expr42.net (SebastianS) Date: Wed, 26 Apr 2006 20:01:08 -0000 Subject: [Bug 41440] Re: kernel can't find sata disks on boot References: <20060426072641.28879.50257.malonedeb@gandwana.ubuntu.com> Message-ID: <20060426200108.28879.52173.malone@gandwana.ubuntu.com> doesn't look like it, different error, and hardware.. but if it's a generic scsi issue they mgiht be related. -- kernel can't find sata disks on boot https://launchpad.net/bugs/41440 From rkimber at ntlworld.com Wed Apr 26 20:09:18 2006 From: rkimber at ntlworld.com (Rkimber) Date: Wed, 26 Apr 2006 20:09:18 -0000 Subject: [Bug 40736] Re: kernel oops with dpkg References: <20060422112557.17670.63564.malonedeb@gandwana.ubuntu.com> Message-ID: <20060426200918.28879.86095.launchpad@gandwana.ubuntu.com> ** Attachment added: "further dpkg problem during update" http://librarian.launchpad.net/2361425/1307 -- kernel oops with dpkg https://launchpad.net/bugs/40736 From ubuntu at web.expr42.net Wed Apr 26 17:09:52 2006 From: ubuntu at web.expr42.net (SebastianS) Date: Wed, 26 Apr 2006 17:09:52 -0000 Subject: [Bug 41440] Re: [Bug 41440] Re: kernel can't find sata disks on boot References: <20060426072641.28879.50257.malonedeb@gandwana.ubuntu.com> <20060426085655.28852.36368.malone@gandwana.ubuntu.com> Message-ID: <20060426170952.GA17445@expr42.net> ah sorry: I'm not sure about the brand of motherboard, but it has a VIA chipset. sata controller: VIA VT6420 SATA RAID it's configged with just one harddisk though furthermore is it an amd64 system, although it's running the 32bit variant of ubuntu dapper drake. On Wed, Apr 26, 2006 at 08:56:55AM -0000, William Grant wrote: > We can't really do much about this bug without further information on > the system that you are trying to run it on. Which chipset is the SATA > controller? Which motherboard? > > ** Changed in: linux-source-2.6.15 linux-image-2.6.15-21-686 (Ubuntu) > Status: Unconfirmed => Needs Info > > -- > kernel can't find sata disks on boot > https://launchpad.net/bugs/41440 -- kernel can't find sata disks on boot https://launchpad.net/bugs/41440 From samtygier at yahoo.co.uk Wed Apr 26 20:21:24 2006 From: samtygier at yahoo.co.uk (sam tygier) Date: Wed, 26 Apr 2006 20:21:24 -0000 Subject: [Bug 37112] Re: iBook G4, on resume from sleep, enables touch-to-click despite my preferences References: <20060329032925.6253.87634.malonedeb@gandwana.ubuntu.com> Message-ID: <20060426202124.28941.80736.malone@gangotri.ubuntu.com> i made a /etc/apm/resume.d/50ppbuttonsd script #!/bin/bash # work around malone Bug #37112 pbbcmd reinit could this be put in dapper, which package would it need to be in? pbbuttonsd or apm? -- iBook G4, on resume from sleep, enables touch-to-click despite my preferences https://launchpad.net/bugs/37112 From bart at samwel.tk Wed Apr 26 20:41:01 2006 From: bart at samwel.tk (Bart Samwel) Date: Wed, 26 Apr 2006 20:41:01 -0000 Subject: [Bug 35213] Re: hibernate fails when not on AC power on HP Pavilion ZT3000 - regression from breezy References: <20060316170910.6510.54248.malonedeb@gangotri.ubuntu.com> Message-ID: <20060426204101.28914.10011.malone@gangotri.ubuntu.com> Note that the kernel parameters set by "laptop_mode stop" are exactly the kernel defaults, so that shouldn't make any difference. Also, I'm sure that no action is taken in the kernel as a result of changing those settings to the same values that they were already at. Anyway, it may be the hdparm settings, the readahead settings or the remounts that screw things up. Could you try changing the following values in laptop-mode.conf to "0", one by one, trying if it still fails after each one: CONTROL_READAHEAD CONTROL_HD_POWERMGMT CONTROL_HD_WRITECACHE CONTROL_HD_IDLE_TIMEOUT CONTROL_MOUNT_OPTIONS That should yield a very clear picture of what the cause is! -- hibernate fails when not on AC power on HP Pavilion ZT3000 - regression from breezy https://launchpad.net/bugs/35213 From zulcss at gmail.com Wed Apr 26 20:58:10 2006 From: zulcss at gmail.com (ChuckShort) Date: Wed, 26 Apr 2006 20:58:10 -0000 Subject: [Bug 40736] Re: kernel oops with dpkg References: <20060422112557.17670.63564.malonedeb@gandwana.ubuntu.com> Message-ID: <20060426205810.28941.72634.malone@gangotri.ubuntu.com> Have you tried running some hardware diagnostics on your machine? -- kernel oops with dpkg https://launchpad.net/bugs/40736 From simon.turvey at gmail.com Wed Apr 26 21:39:22 2006 From: simon.turvey at gmail.com (Simon) Date: Wed, 26 Apr 2006 21:39:22 -0000 Subject: [Bug 34458] mrv8k firmware missing References: <20060311151424.30057.1220.malonedeb@gandwana.ubuntu.com> Message-ID: <20060426213922.28914.88246.launchpad@canonical@gangotri.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Assignee: Ben Collins Status: Confirmed Description: The two relevant lines from /var/log/syslog are: Mar 11 15:12:12 ubuntu firmware_helper[6861]: main: error loading '/lib/firmware/mrv8k-b.fw' for device '/class/firmware/0000:03:00.0' with driver 'mrv8k' Mar 11 15:12:13 ubuntu NetworkManager: ^I[1142089933.667043] (): New device added (hal udi is '/org/freedesktop/Hal/devices/pci_11ab_1faa'). -- mrv8k firmware missing https://launchpad.net/bugs/34458 From mdz at ubuntu.com Wed Apr 26 21:39:22 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Wed, 26 Apr 2006 21:39:22 -0000 Subject: [Bug 34458] Re: mrv8k firmware missing References: <20060311151424.30057.1220.malonedeb@gandwana.ubuntu.com> Message-ID: <20060426213922.28914.52581.malone@gangotri.ubuntu.com> If there is a bug here, it is in the kernel. Ben, is there redistributable firmware available for this driver? If not, there is nothing we can do. ** Summary changed: - Netgear WG511 v2 not supported on Flight 5 Live CD + mrv8k firmware missing ** Changed in: network-manager (Ubuntu) Sourcepackagename: network-manager => linux-source-2.6.15 Assignee: (unassigned) => Ben Collins Status: Needs Info => Confirmed -- mrv8k firmware missing https://launchpad.net/bugs/34458 From _bert.rijsdijk at casema.nl Wed Apr 26 21:56:01 2006 From: _bert.rijsdijk at casema.nl (bert_3262) Date: Wed, 26 Apr 2006 21:56:01 -0000 Subject: [Bug 40071] Re: linux-image-* will happily install even if /boot fills up in the process References: <20060418220553.8468.65002.malonedeb@gandwana.ubuntu.com> Message-ID: <20060426215601.28914.34246.malone@gangotri.ubuntu.com> I've had the same problem about two moths ago when I was still using breazy. Unfortunatly I don't know exactly the date/kernel version it occurred. But when installing the kernel /boot also ran out of space while installing the initial ramdisk and gave no warning at all that it had failed... -- linux-image-* will happily install even if /boot fills up in the process https://launchpad.net/bugs/40071 From me at blaue0.net Wed Apr 26 22:11:49 2006 From: me at blaue0.net (=?utf-8?q?Christian_G=C3=BCdel?=) Date: Wed, 26 Apr 2006 22:11:49 -0000 Subject: [Bug 41654] Unplugging drive-bay causes system freeze, worked in Breezy References: <20060426203326.28879.29842.malonedeb@gandwana.ubuntu.com> Message-ID: <20060426221149.28941.99051.launchpad@canonical@gangotri.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: My laptop (Dell Inspiron 8600c) with the following specs: - Intel Pentium M 1.6 GHz (Dothan core) - 768 MB DDR-RAM - nVidia GeForce FX 5200 Go (32 MB VRAM) - Some Dell DVD-ROM If I plug out the DVD-ROM from the drive bay (to insert a second battery) the whole system freezes about a second after unplugging. This worked in Breezy. I don't know how to get some more information as it's nearly impossible to see what does happen... -- Unplugging drive-bay causes system freeze, worked in Breezy https://launchpad.net/bugs/41654 From samtygier at yahoo.co.uk Wed Apr 26 22:11:48 2006 From: samtygier at yahoo.co.uk (sam tygier) Date: Wed, 26 Apr 2006 22:11:48 -0000 Subject: [Bug 41654] Re: Unplugging drive-bay causes system freeze, worked in Breezy References: <20060426203326.28879.29842.malonedeb@gandwana.ubuntu.com> Message-ID: <20060426221149.28941.25511.launchpad@gangotri.ubuntu.com> ** Changed in: Ubuntu Sourcepackagename: None => linux-source-2.6.15 -- Unplugging drive-bay causes system freeze, worked in Breezy https://launchpad.net/bugs/41654 From launchpad at groovix.com Wed Apr 26 22:42:23 2006 From: launchpad at groovix.com (Michael Pardee) Date: Wed, 26 Apr 2006 22:42:23 -0000 Subject: [Bug 35213] Re: hibernate fails when not on AC power on HP Pavilion ZT3000 - regression from breezy References: <20060316170910.6510.54248.malonedeb@gangotri.ubuntu.com> Message-ID: <20060426224223.28941.95503.malone@gangotri.ubuntu.com> right after I left that last message I started thinking about hdparm... long story short, it is the write cache control, which makes perfect sense -- if you turn off the hard drive write caching, writes could be painfully slow. So, the solution is to set CONTROL_HD_WRITECACHE=0 in /etc/laptop-mode/laptop-mode.conf and everything seems to work great. If I set it back to 1, it is slow again, so I'm pretty confident this is it. Thanks! -- hibernate fails when not on AC power on HP Pavilion ZT3000 - regression from breezy https://launchpad.net/bugs/35213 From sitsofe at yahoo.com Wed Apr 26 22:46:08 2006 From: sitsofe at yahoo.com (Sitsofe Wheeler) Date: Wed, 26 Apr 2006 22:46:08 -0000 Subject: [Bug 41634] Re: Network card stops working (sky2) References: <20060426180822.28879.46051.malonedeb@gandwana.ubuntu.com> Message-ID: <20060426224609.28852.80980.malone@gandwana.ubuntu.com> Probably a dup of other "sky2 breaks under load" bugs e.g. Bug #40729, Bug #38689, Bug #37784, Bug #33230 -- Network card stops working (sky2) https://launchpad.net/bugs/41634 From garybyron at verizon.net Thu Apr 27 00:01:47 2006 From: garybyron at verizon.net (gjbnh) Date: Thu, 27 Apr 2006 00:01:47 -0000 Subject: [Bug 41385] Broadcom wireless not working References: <20060425210311.28914.38034.malonedeb@gangotri.ubuntu.com> Message-ID: <20060427000147.28879.58670.launchpad@canonical@gandwana.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: On my zw4947wm-b, the braodcom chip is recognized during installation, and works. This stop working upon reboot. Changes made with the networking applet does not work either, spending several minutes probing, indicates it is working, but doesn't work. Closing the applet causes several minutes of activity somewhere (?) an no change in fuctioned. -- Broadcom wireless not working https://launchpad.net/bugs/41385 From malcomm77 at yahoo.com Wed Apr 26 23:56:43 2006 From: malcomm77 at yahoo.com (Marcus Malcom) Date: Wed, 26 Apr 2006 23:56:43 -0000 Subject: [Bug 40854] Re: Intermittent Network Problem on Upgrade from Breezy to Dapper References: <20060422231604.30501.15730.malonedeb@gangotri.ubuntu.com> Message-ID: <20060426235643.28914.38047.malone@gangotri.ubuntu.com> FYI: this problem is happening in 2.6.15-21-386 as well. -- Intermittent Network Problem on Upgrade from Breezy to Dapper https://launchpad.net/bugs/40854 From sitsofe at yahoo.com Thu Apr 27 00:00:28 2006 From: sitsofe at yahoo.com (Sitsofe Wheeler) Date: Thu, 27 Apr 2006 00:00:28 -0000 Subject: [Bug 41385] Re: Broadcom wireless not working References: <20060425210311.28914.38034.malonedeb@gangotri.ubuntu.com> Message-ID: <20060427000028.28914.77174.malone@gangotri.ubuntu.com> Probably a dup of other bcm43xx bugs - e.g. Bug #37765, Bug #36525 . gjbnh: It may be usful to look at those bugs and report the results of setting the speed to 11Mbits along with whether you can do a scan. It would also be helpful to include the output of the uname -a command. -- Broadcom wireless not working https://launchpad.net/bugs/41385 From sitsofe at yahoo.com Thu Apr 27 00:01:46 2006 From: sitsofe at yahoo.com (Sitsofe Wheeler) Date: Thu, 27 Apr 2006 00:01:46 -0000 Subject: [Bug 41385] Re: Broadcom wireless not working References: <20060425210311.28914.38034.malonedeb@gangotri.ubuntu.com> Message-ID: <20060427000146.28879.78781.malone@gandwana.ubuntu.com> Punting to linux-source based on other bcm43xx problem ** Changed in: Ubuntu Sourcepackagename: None => linux-source-2.6.15 -- Broadcom wireless not working https://launchpad.net/bugs/41385 From sitsofe at yahoo.com Thu Apr 27 00:02:46 2006 From: sitsofe at yahoo.com (Sitsofe Wheeler) Date: Thu, 27 Apr 2006 00:02:46 -0000 Subject: [Bug 41385] Re: Broadcom wireless not working References: <20060425210311.28914.38034.malonedeb@gangotri.ubuntu.com> Message-ID: <20060427000246.28941.56151.malone@gangotri.ubuntu.com> gjbnh: It would also be helpful if you attach using the Add Attachment link at the left of the malone website the output of the dmesg command as a text file. -- Broadcom wireless not working https://launchpad.net/bugs/41385 From surak at surak.eti.br Thu Apr 27 02:06:45 2006 From: surak at surak.eti.br (Alexandre Otto Strube) Date: Thu, 27 Apr 2006 02:06:45 -0000 Subject: [Bug 30667] Re: Kernel error - offset error References: <20060206163939.11612.51452.malonedeb@gandwana.ubuntu.com> Message-ID: <20060427020645.28914.86852.malone@gangotri.ubuntu.com> Hello Tomgoh - this bug was posted more than two months ago, and no one had a similar problem. As you can't test your hardware anymore, can we reject this bug so the developers can concentrate on other bugs? You said this happened to debian sid also, so it seems hardware-related. Thanks for your attention! -- Kernel error - offset error https://launchpad.net/bugs/30667 From keithcu at gmail.com Thu Apr 27 03:36:06 2006 From: keithcu at gmail.com (keithCu) Date: Thu, 27 Apr 2006 03:36:06 -0000 Subject: [Bug 39611] Re: ipw2200 - firmware error detected References: <20060415003936.1627.22283.malonedeb@gangotri.ubuntu.com> Message-ID: <20060427033606.30638.91490.malone@gangotri.ubuntu.com> I'm still getting this error message with 2.6.15-21 and all the latest everything else: [4295027.935000] eth1: NETDEV_TX_BUSY returned; driver should report queue full via ieee_device->is_queue_full. [4295179.508000] ipw2200: Firmware error detected. Restarting. xxx at zzz:~$ uname -a Linux xxx 2.6.15-21-686 #1 SMP PREEMPT Fri Apr 21 16:57:03 UTC 2006 i686 GNU/Linux Maybe there is even newer code. -- ipw2200 - firmware error detected https://launchpad.net/bugs/39611 From htinnocent at gmail.com Thu Apr 27 03:43:56 2006 From: htinnocent at gmail.com (htinn) Date: Thu, 27 Apr 2006 03:43:56 -0000 Subject: [Bug 37370] Re: Crash/freeze when restarting networking, rt2570 wireless USB (DWL-G122, rev B1) References: <20060330180253.23733.49082.malonedeb@gandwana.ubuntu.com> Message-ID: <20060427034356.29040.63096.malone@gandwana.ubuntu.com> Actually, I've encountered this problem many many times, and merely unplugging/replugging does nothing helpful. The PREEMPT off thing looks promising. I'll give that a shot. :) -- Crash/freeze when restarting networking, rt2570 wireless USB (DWL-G122, rev B1) https://launchpad.net/bugs/37370 From htinnocent at gmail.com Thu Apr 27 04:16:52 2006 From: htinnocent at gmail.com (htinn) Date: Thu, 27 Apr 2006 04:16:52 -0000 Subject: [Bug 37370] Re: Crash/freeze when restarting networking, rt2570 wireless USB (DWL-G122, rev B1) References: <20060330180253.23733.49082.malonedeb@gandwana.ubuntu.com> Message-ID: <20060427041652.28955.46271.malone@gandwana.ubuntu.com> Okay, I'm now running with the "-server" kernel, and I can restart the network without incident. -- Crash/freeze when restarting networking, rt2570 wireless USB (DWL-G122, rev B1) https://launchpad.net/bugs/37370 From jerome.lacoste at gmail.com Thu Apr 27 06:04:44 2006 From: jerome.lacoste at gmail.com (Jerome Lacoste) Date: Thu, 27 Apr 2006 06:04:44 -0000 Subject: [Bug 35993] Re: hang on an IBM NetVista PC References: <20060322114239.4578.60173.malonedeb@gandwana.ubuntu.com> Message-ID: <20060427060444.30638.84070.malone@gangotri.ubuntu.com> So I've added "noapic nolapic" to my kernel boot configuration and this apparently solved the issue. during a cumulated time of around 25 work days, the 2 machines I migrated have not experienced the problem. I've been told that noapic nolapic on a uniprocessor don't change functionality much. I've used this trick in several cases already. There clearly is an issue, but I don't have time to investigate it today. If someone on the other side makes a patch, I could test it. -- hang on an IBM NetVista PC https://launchpad.net/bugs/35993 From danilo at gnome.org Thu Apr 27 06:37:34 2006 From: danilo at gnome.org (=?utf-8?b?0JTQsNC90LjQu9C+INCo0LXQs9Cw0L0=?=) Date: Thu, 27 Apr 2006 06:37:34 -0000 Subject: [Bug 37145] Re: UniChrome Pro IGP not shown in lspci; X doesn't work References: <20060329110215.6279.44293.malonedeb@gandwana.ubuntu.com> Message-ID: <20060427063734.29040.46983.malone@gandwana.ubuntu.com> Resolved using "pci=conf1" (as advised on forums above). Should I mark this as fixed (since it's not actually; this is a workaround)? -- UniChrome Pro IGP not shown in lspci; X doesn't work https://launchpad.net/bugs/37145 From zanglang at time.net.my Thu Apr 27 06:47:33 2006 From: zanglang at time.net.my (Jerry Chong) Date: Thu, 27 Apr 2006 06:47:33 -0000 Subject: [Bug 30766] Re: default firmware not working for acx d-link dwl-g650+ References: <20060207221213.32736.87495.malonedeb@gandwana.ubuntu.com> Message-ID: <20060427064733.29040.41960.launchpad@gandwana.ubuntu.com> ** Changed in: linux-restricted-modules-2.6.15 (Ubuntu) Status: Unconfirmed => Confirmed -- default firmware not working for acx d-link dwl-g650+ https://launchpad.net/bugs/30766 From apeeters at lashout.net Thu Apr 27 08:02:11 2006 From: apeeters at lashout.net (Adriaan Peeters) Date: Thu, 27 Apr 2006 08:02:11 -0000 Subject: [Bug 36119] Re: external usb keyboard dead after suspend/resume References: <20060323090614.10163.64654.malonedeb@gangotri.ubuntu.com> Message-ID: <20060427080211.30638.13252.launchpad@gangotri.ubuntu.com> ** Attachment added: "dmesg-2.6.15-20-386" http://librarian.launchpad.net/2382746/dmesg-2.6.15-20-386 -- external usb keyboard dead after suspend/resume https://launchpad.net/bugs/36119 From apeeters at lashout.net Thu Apr 27 08:20:51 2006 From: apeeters at lashout.net (Adriaan Peeters) Date: Thu, 27 Apr 2006 08:20:51 -0000 Subject: [Bug 36119] Re: external usb keyboard dead after suspend/resume References: <20060323090614.10163.64654.malonedeb@gangotri.ubuntu.com> Message-ID: <20060427082051.28955.50133.launchpad@gandwana.ubuntu.com> ** Attachment added: "dmesg-2.6.15-20-386 of working suspend/resume cycle" http://librarian.launchpad.net/2382750/dmesg-2.6.15-20-386.working -- external usb keyboard dead after suspend/resume https://launchpad.net/bugs/36119 From mikko.s.saarinen at mbnet.fi Thu Apr 27 08:20:36 2006 From: mikko.s.saarinen at mbnet.fi (Mikko Saarinen) Date: Thu, 27 Apr 2006 08:20:36 -0000 Subject: [Bug 35213] Re: hibernate fails when not on AC power on HP Pavilion ZT3000 - regression from breezy References: <20060316170910.6510.54248.malonedeb@gangotri.ubuntu.com> Message-ID: <20060427082036.29040.46602.malone@gandwana.ubuntu.com> I did this too and I also re-enabled the laptop-mode in /etc/default/acpi-support and now my machine is working normally (suspended it twice after a reboot, both finished in less than a minute). I did also some pre-emptive testing by setting the action of lid-close to suspend, rather than hibernate and it is also working great. Thanks for you both Michael and Bart. This was the largest issue I've had with my laptop since I installed Dapper and now it seems to be fixed =) The only question is how much more power is consumed without the writecache option? I have very poor battery life already... -- hibernate fails when not on AC power on HP Pavilion ZT3000 - regression from breezy https://launchpad.net/bugs/35213 From bart at samwel.tk Thu Apr 27 08:58:02 2006 From: bart at samwel.tk (Bart Samwel) Date: Thu, 27 Apr 2006 08:58:02 -0000 Subject: [Bug 35213] Re: hibernate fails when not on AC power on HP Pavilion ZT3000 - regression from breezy References: <20060316170910.6510.54248.malonedeb@gangotri.ubuntu.com> Message-ID: <20060427085802.28955.65808.malone@gandwana.ubuntu.com> I'm glad it's solved! BTW, the default value for CONTROL_HD_WRITECACHE was already changed to 0 in version 1.20 of the upstream laptop-mode-tools package. Turning the HD writecache off while in laptop mode originally seemed like the "safe choice" -- to prevent the hard drive from spinning down while it hasn't written back all data yet. However, it turned out that in reality, hard drives never spin down while retaining unwritten data in the cache. So the option is best left turned off. In fact, I think I'll remove it. :-) -- hibernate fails when not on AC power on HP Pavilion ZT3000 - regression from breezy https://launchpad.net/bugs/35213 From mikael at upnet.lt Thu Apr 27 09:15:05 2006 From: mikael at upnet.lt (inspired) Date: Thu, 27 Apr 2006 09:15:05 -0000 Subject: [Bug 41722] Ndiswrapper no longer working after upgrade to Dapper References: <20060427091505.28955.33270.malonedeb@gandwana.ubuntu.com> Message-ID: <20060427091505.28955.33270.malonedeb@gandwana.ubuntu.com> Public bug reported: Affects: ndiswrapper (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: I updated to Dapper tonight and when I rebooted my wireless network card was no longer working. I have an Fujitsu Siemens Amilo Pro laptop and I used to have to press Fn+F12 when Ubuntu began booting to enable the Broadcom wireless card and a led would light up. The led no longer lights up, although ndiswrapper reports that the driver is installed and the hardware is present. I also noticed that the interface name has changed from wlan0 to eth1. I am using ndiswrapper 1.11 from the ndiswrapper's sourceforge page and it worked just fine before I upgraded to Dapper. I use the bcmwl5 driver and my kernel version is 2.6.15-21-686 from the Dapper apt repository. I see that others have experienced problems with wireless cards after upgrading as well, but I can't find any conclusion. ** Summary changed: - Ndiswrapper no longer working after upgrade to Dapper + Ndiswrapper no longer works after upgrade to Dapper -- Ndiswrapper no longer works after upgrade to Dapper https://launchpad.net/bugs/41722 From jo-ker at mailcity.com Thu Apr 27 09:21:01 2006 From: jo-ker at mailcity.com (Sef) Date: Thu, 27 Apr 2006 09:21:01 -0000 Subject: [Bug 36089] Re: After Kernel update (3/21/2006) no sound References: <20060323010921.24660.83604.malonedeb@gandwana.ubuntu.com> Message-ID: <20060427092101.28955.51723.malone@gandwana.ubuntu.com> I have sound again. I just ran through the BIOS without changing a thing and at login, I heard the login sound and the music while the desktop was loading. Streaming music now. If it goes off again, I will follow the directions above for what you requested. -- After Kernel update (3/21/2006) no sound https://launchpad.net/bugs/36089 From mikael at upnet.lt Thu Apr 27 09:42:50 2006 From: mikael at upnet.lt (inspired) Date: Thu, 27 Apr 2006 09:42:50 -0000 Subject: [Bug 41722] Re: Ndiswrapper no longer works after upgrade to Dapper References: <20060427091505.28955.33270.malonedeb@gandwana.ubuntu.com> Message-ID: <20060427094250.30606.68613.malone@gangotri.ubuntu.com> Sorry. Found the following URL and got it working again with ndiswrapper. I suppose the bcm43xx module is better and supports WPA so I will try it later: https://wiki.ubuntu.com/WifiDocs/Driver/Broadcom43xx -- Ndiswrapper no longer works after upgrade to Dapper https://launchpad.net/bugs/41722 From l.bigonville at edpnet.be Thu Apr 27 10:05:28 2006 From: l.bigonville at edpnet.be (Laurent Bigonville) Date: Thu, 27 Apr 2006 10:05:28 -0000 Subject: [Bug 41654] Re: Unplugging drive-bay causes system freeze, worked in Breezy References: <20060426203326.28879.29842.malonedeb@gandwana.ubuntu.com> Message-ID: <20060427100528.28955.58559.malone@gandwana.ubuntu.com> You need to unregister de ide device before removing it. Can be done with hdparm or with hotswap -- Unplugging drive-bay causes system freeze, worked in Breezy https://launchpad.net/bugs/41654 From me at blaue0.net Thu Apr 27 10:16:02 2006 From: me at blaue0.net (=?utf-8?q?Christian_G=C3=BCdel?=) Date: Thu, 27 Apr 2006 10:16:02 -0000 Subject: [Bug 41654] Re: Unplugging drive-bay causes system freeze, worked in Breezy References: <20060426203326.28879.29842.malonedeb@gandwana.ubuntu.com> Message-ID: <20060427101602.30606.16512.malone@gangotri.ubuntu.com> Well, but why did it work with Breezy? Was there some sort of automatic unregistering? -- Unplugging drive-bay causes system freeze, worked in Breezy https://launchpad.net/bugs/41654 From launchpad.net.tormod at xoxy.net Thu Apr 27 10:31:01 2006 From: launchpad.net.tormod at xoxy.net (Tormod Volden) Date: Thu, 27 Apr 2006 10:31:01 -0000 Subject: [Bug 41375] Re: resume after hibernation fails with "busybox: page allocation failure" References: <20060425204249.28879.28055.malonedeb@gandwana.ubuntu.com> Message-ID: <20060427103101.29040.82376.launchpad@gandwana.ubuntu.com> *** This bug is a duplicate of bug 36944 *** ** This bug has been marked a duplicate of bug 36944 software_resume()->read_suspend_image() can fail at get_zeroed_page() -- resume after hibernation fails with "busybox: page allocation failure" https://launchpad.net/bugs/41375 From launchpad.net.tormod at xoxy.net Thu Apr 27 10:32:07 2006 From: launchpad.net.tormod at xoxy.net (Tormod Volden) Date: Thu, 27 Apr 2006 10:32:07 -0000 Subject: [Bug 39237] Re: Resuming from hibernation fails References: <20060412012833.32233.60531.malonedeb@gandwana.ubuntu.com> Message-ID: <20060427103207.30606.24309.launchpad@gangotri.ubuntu.com> *** This bug is a duplicate of bug 36944 *** ** This bug has been marked a duplicate of bug 36944 software_resume()->read_suspend_image() can fail at get_zeroed_page() -- Resuming from hibernation fails https://launchpad.net/bugs/39237 From launchpad.net.tormod at xoxy.net Thu Apr 27 10:31:01 2006 From: launchpad.net.tormod at xoxy.net (Tormod Volden) Date: Thu, 27 Apr 2006 10:31:01 -0000 Subject: [Bug 36944] Re: software_resume()->read_suspend_image() can fail at get_zeroed_page() References: <20060328014552.6253.26373.malonedeb@gandwana.ubuntu.com> Message-ID: <20060427103101.29040.26050.launchpad@gandwana.ubuntu.com> ** Bug 41375 has been marked a duplicate of this bug ** Bug 39237 has been marked a duplicate of this bug -- software_resume()->read_suspend_image() can fail at get_zeroed_page() https://launchpad.net/bugs/36944 From patrick at seher-it.at Thu Apr 27 10:47:25 2006 From: patrick at seher-it.at (Patrick Seher) Date: Thu, 27 Apr 2006 10:47:25 -0000 Subject: [Bug 5844] Re: SIS7012 chipset produces no sound in Dapper Flight 2 with intel8x0 ALSA driver due to codec timeouts References: <20051216155851.24631.9277.malonedeb@gangotri.ubuntu.com> Message-ID: <20060427104726.28955.2734.malone@gandwana.ubuntu.com> ok, i got the same PC for 1 hour back. i installed the latest ubuntu dapper release (incl. all updates). AND i the soundcard works now! BUT: i didnt heard any sound... i had to turn on the "duplicat" switch in alsaconfig. AND i cant adjust the volume with the "master"-volume. i have to use PCM to adjust the sound. So, now i have to give this PC back to its owner... :( -- SIS7012 chipset produces no sound in Dapper Flight 2 with intel8x0 ALSA driver due to codec timeouts https://launchpad.net/bugs/5844 From sim at geekbox.be Thu Apr 27 11:09:16 2006 From: sim at geekbox.be (ifmy) Date: Thu, 27 Apr 2006 11:09:16 -0000 Subject: [Bug 41719] PCMCIA 3com network card not working, but worked with breezy References: <20060427084512.29040.80955.malonedeb@gandwana.ubuntu.com> Message-ID: <20060427110916.30606.12095.launchpad@canonical@gangotri.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Needs Info Description: Model : 3CCFEM556B 3com Mégahertz 10/100 lan+56k modem PC Card This card works very well with breezy, but not in dapper. It's listed in cardctl ident, kernel module 3c574_cs is loaded but no interface is created, then. -- PCMCIA 3com network card not working, but worked with breezy https://launchpad.net/bugs/41719 From samtygier at yahoo.co.uk Thu Apr 27 11:09:15 2006 From: samtygier at yahoo.co.uk (sam tygier) Date: Thu, 27 Apr 2006 11:09:15 -0000 Subject: [Bug 41719] Re: PCMCIA 3com network card not working, but worked with breezy References: <20060427084512.29040.80955.malonedeb@gandwana.ubuntu.com> Message-ID: <20060427110915.30606.25031.malone@gangotri.ubuntu.com> can you post the output of dmesg | tail -n 50 after inserting the card ** Changed in: Ubuntu Sourcepackagename: None => linux-source-2.6.15 Status: Unconfirmed => Needs Info -- PCMCIA 3com network card not working, but worked with breezy https://launchpad.net/bugs/41719 From rkimber at ntlworld.com Thu Apr 27 11:28:51 2006 From: rkimber at ntlworld.com (Rkimber) Date: Thu, 27 Apr 2006 11:28:51 -0000 Subject: [Bug 40736] Re: kernel oops with dpkg References: <20060422112557.17670.63564.malonedeb@gandwana.ubuntu.com> Message-ID: <20060427112851.29040.62676.malone@gandwana.ubuntu.com> Yes. memtest (though not run since experiencing these particular problems, but run fairly recently) has shown nothing. Smartmontools shows nothing. The machine had a new power supply last summer and runs off an UPS. -- kernel oops with dpkg https://launchpad.net/bugs/40736 From droebbel.melta at gmx.de Thu Apr 27 11:34:28 2006 From: droebbel.melta at gmx.de (David Meier) Date: Thu, 27 Apr 2006 11:34:28 -0000 Subject: [Bug 35044] Re: speedstep-smi doesn't load anymore on thinkpad t20 References: <20060315125056.30057.65261.malonedeb@gandwana.ubuntu.com> Message-ID: <20060427113428.29040.20835.malone@gandwana.ubuntu.com> This seems to require CONFIG_CPU_FREQ_DEBUG=y to be set. When I tested with older kernels, the module parameter relaxed_check=1 for speedstep-lib was necessary for speedstep-smi to load. It had no effect without debugging activated. However, I just tested this with 2.6.15-21.32 source package, and I did not have to give this module parameter at all. The debugging option itself was enough. Maybe one might set CONFIG_CPU_FREQ_DEBUG=y, or are there any negative impacts? -- speedstep-smi doesn't load anymore on thinkpad t20 https://launchpad.net/bugs/35044 From lukebaker at gmail.com Thu Apr 27 13:24:46 2006 From: lukebaker at gmail.com (Luke Baker) Date: Thu, 27 Apr 2006 13:24:46 -0000 Subject: [Bug 41214] Re: ipw3945 WPA Patch References: <20060425015624.13024.33928.malonedeb@gandwana.ubuntu.com> Message-ID: <20060427132446.28955.49010.malone@gandwana.ubuntu.com> Agreed. In fact, 1.0.0 was really 0.0.69, while 1.0.1 is the next release after 0.0.74. So the link Richard provided only lists a portion of the bugs fixed from 1.0.0 => 1.0.1. There were some serious problems with 1.0.0. -- ipw3945 WPA Patch https://launchpad.net/bugs/41214 From diamond+launchpad at nonado.net Thu Apr 27 13:36:54 2006 From: diamond+launchpad at nonado.net (Stephen Shirley) Date: Thu, 27 Apr 2006 13:36:54 -0000 Subject: [Bug 41746] dapper kernel fails to do smp on pentium-d viiv References: <20060427133654.28955.83165.malonedeb@gandwana.ubuntu.com> Message-ID: <20060427133654.28955.83165.malonedeb@gandwana.ubuntu.com> Public bug reported: Affects: linux-meta linux-image-2.6-686 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: Fresh install of dapper beta. The cpu is a dual-core intel pentium-d viiv. This appears in dmesg: [4294667.296000] Processor #0 15:4 APIC version 20 [4294667.296000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [4294667.296000] Processor #1 15:4 APIC version 20 [4294667.296000] WARNING: NR_CPUS limit of 1 reached. Processor ignored. And /proc/cpuinfo only shows up one processor. Tested with: linux-image-2.6.15-20-386 linux-image-2.6.15-21-386 -- dapper kernel fails to do smp on pentium-d viiv https://launchpad.net/bugs/41746 From icenounet at gmail.com Thu Apr 27 13:52:37 2006 From: icenounet at gmail.com (icenounet) Date: Thu, 27 Apr 2006 13:52:37 -0000 Subject: [Bug 39943] Crash in installation References: <20060418015339.16443.38238.malonedeb@gandwana.ubuntu.com> Message-ID: <20060427135237.30606.99382.launchpad@canonical@gangotri.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: Hi, When I tried to use the Kubuntu Drapper 6.04 flight 6 release (X86 AMD 64) install crash when I do install on my harddisk, it s make immediately a Kernel Panic. My computer is a: Emachines T6212 AMD ATHALON 3200+ RAM 512mb Ati Xpress 200 128ram (shared) Ac97 5.1 sound card I have the same problem with fedora 5 when I unable glx driver for ati -- Crash in installation https://launchpad.net/bugs/39943 From fabbione at ubuntu.com Thu Apr 27 13:52:37 2006 From: fabbione at ubuntu.com (Fabio Massimo Di Nitto) Date: Thu, 27 Apr 2006 13:52:37 -0000 Subject: [Bug 39943] Re: Crash in installation References: <20060418015339.16443.38238.malonedeb@gandwana.ubuntu.com> Message-ID: <20060427135237.30606.57081.malone@gangotri.ubuntu.com> if it does a kernel panic immediatly, i have a hardtime to see this as an X problem. ** Changed in: xorg (Ubuntu) Sourcepackagename: xorg => linux-source-2.6.15 -- Crash in installation https://launchpad.net/bugs/39943 From m.escardo at cs.bham.ac.uk Thu Apr 27 15:01:36 2006 From: m.escardo at cs.bham.ac.uk (Martin Escardo) Date: Thu, 27 Apr 2006 15:01:36 -0000 Subject: [Bug 35213] Re: hibernate fails when not on AC power on HP Pavilion ZT3000 - regression from breezy References: <20060316170910.6510.54248.malonedeb@gangotri.ubuntu.com> Message-ID: <20060427150136.30606.27903.malone@gangotri.ubuntu.com> I can confirm that also my Dell D410 laptop can now successfully hibernate under dapper with the above modification (with and without laptop mode enabled). Thanks. (But why was it working under Breezy on the same machine?) -- hibernate fails when not on AC power on HP Pavilion ZT3000 - regression from breezy https://launchpad.net/bugs/35213 From ej.finneran at gmail.com Thu Apr 27 15:08:14 2006 From: ej.finneran at gmail.com (EJ Finneran) Date: Thu, 27 Apr 2006 15:08:14 -0000 Subject: [Bug 41756] Kernel NULL pointer dereference References: <20060427150815.30638.72174.malonedeb@gangotri.ubuntu.com> Message-ID: <20060427150815.30638.72174.malonedeb@gangotri.ubuntu.com> Public bug reported: Affects: linux-meta linux-image-2.6-k7 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: I'm not sure what started it but once this started happening, no program would run until I performed a reboot. Apr 27 09:54:17 kal-el kernel: [4297794.512000] c016ee00 Apr 27 09:54:17 kal-el kernel: [4297794.512000] PREEMPT SMP Apr 27 09:54:17 kal-el kernel: [4297794.512000] Modules linked in: vmnet vmmon binfmt_misc rfcomm l2cap bluetooth cpufreq_powersave cpufreq_stats cpufreq_userspace cpufreq_ondemand cpufreq_conservative freq_table tc1100_wmi video acpi_sbs battery i2c_acpi_ec container button pcc_acpi sony_acpi ac dev_acpi hotkey nls_iso8859_1 nls_cp437 vfat fat nls_utf8 ntfs ipv6 sg sd_mod dm_mod md_mod asb100 hwmon_vid af_packet eeprom ds1621 sr_mod sbp2 lp snd_emu10k1_synth snd_emux_synth snd_seq_virmidi snd_seq_midi_emul snd_seq_dummy snd_seq_oss snd_seq_midi snd_seq_midi_event floppy tsdev snd_seq snd_emu10k1 snd_rawmidi snd_ac97_codec snd_ac97_bus usb_storage snd_pcm_oss snd_mixer_oss scsi_mod parport_pc parport usblp pcspkr nvidia snd_pcm snd_seq_device snd_timer snd_page_alloc snd_util_mem snd_hwdep snd i2c_viapro i2c_core soundcore psmouse shpchp pci_hotplug via_ircc 3c59x mii rtc serio_raw irda crc_ccitt via_agp emu10k1_gp ohci1394 ieee1394 gameport agpgart evdev reiserfs ide_generic ehci_hcd uhci_hcd usbcore ide_cd cd Apr 27 09:54:17 kal-el kernel: om ide_disk generic via82cxxx thermal processor fan fbcon tileblit font bitblit softcursor capability commoncap Apr 27 09:54:17 kal-el kernel: [4297794.512000] CPU: 0 Apr 27 09:54:17 kal-el kernel: [4297794.512000] EIP: 0060:[put_unused_fd+16/96] Tainted: P VLI Apr 27 09:54:17 kal-el kernel: [4297794.512000] EFLAGS: 00210296 (2.6.15-21-k7) Apr 27 09:54:17 kal-el kernel: [4297794.512000] EIP is at put_unused_fd+0x10/0x60 Apr 27 09:54:17 kal-el kernel: [4297794.512000] eax: 00000015 ebx: 08599038 ecx: c16c9e20 edx: c16c9e30 Apr 27 09:54:17 kal-el kernel: [4297794.512000] esi: 00000015 edi: e8fec000 ebp: 00000015 esp: da059f84 Apr 27 09:54:17 kal-el kernel: [4297794.512000] ds: 007b es: 007b ss: 0068 Apr 27 09:54:17 kal-el kernel: [4297794.512000] Process kopete (pid: 5769, threadinfo=da058000 task=da027560) Apr 27 09:54:17 kal-el kernel: [4297794.512000] Stack: 08599038 00018800 e8fec000 c016efb9 e8fec000 00018800 b6ee597c b7fd67a8 Apr 27 09:54:17 kal-el kernel: [4297794.512000] fffffffe 08599038 00018800 bffebc14 da058000 c0103417 08599038 00018800 Apr 27 09:54:17 kal-el kernel: [4297794.512000] b6ee597c 00018800 bffebc14 bffeb8c8 00000005 0000007b 0000007b 00000005 Apr 27 09:54:17 kal-el kernel: [4297794.512000] Call Trace: Apr 27 09:54:17 kal-el kernel: [4297794.512000] [do_sys_open+249/256] do_sys_open+0xf9/0x100 Apr 27 09:54:17 kal-el kernel: [4297794.512000] [sysenter_past_esp+84/117] sysenter_past_esp+0x54/0x75 Apr 27 09:54:17 kal-el kernel: [4297794.512000] Code: 44 24 0c be e8 ff ff ff e8 ce 98 19 00 83 c4 14 89 f0 5b 5e 5f 5d c3 8d 74 26 00 83 ec 0c 89 74 24 04 89 7c 24 08 89 c6 89 1c 24 <00> 00 e0 ff ff 21 e0 8b 00 8b 98 64 04 00 00 8d 00 b0 01 00 00 Apr 27 09:54:19 kal-el kernel: [4297794.512000] <1>Unable to handle kernel NULL pointer dereference at virtual address 00000004 -- Kernel NULL pointer dereference https://launchpad.net/bugs/41756 From bart at samwel.tk Thu Apr 27 15:13:59 2006 From: bart at samwel.tk (Bart Samwel) Date: Thu, 27 Apr 2006 15:13:59 -0000 Subject: [Bug 35213] Re: [Bug 35213] Re: hibernate fails when not on AC power on HP Pavilion ZT3000 - regression from breezy References: <20060316170910.6510.54248.malonedeb@gangotri.ubuntu.com> <20060427150136.30606.27903.malone@gangotri.ubuntu.com> Message-ID: <4450DFB7.6010608@samwel.tk> Martin Escardo wrote: > (But why was it working under Breezy on the > same machine?) Because the included version 1.05 of laptop-mode-tools didn't do writecache control. This was added in 1.06 and disabled by default in 1.20. -- hibernate fails when not on AC power on HP Pavilion ZT3000 - regression from breezy https://launchpad.net/bugs/35213 From leidola at newcon.de Thu Apr 27 15:15:07 2006 From: leidola at newcon.de (Olaf Leidinger) Date: Thu, 27 Apr 2006 15:15:07 -0000 Subject: [Bug 35044] Re: speedstep-smi doesn't load anymore on thinkpad t20 References: <20060315125056.30057.65261.malonedeb@gandwana.ubuntu.com> Message-ID: <20060427151507.30638.91836.malone@gangotri.ubuntu.com> On gentoo I set the following options in my .config : CONFIG_X86_SPEEDSTEP_CENTRINO=m CONFIG_X86_SPEEDSTEP_CENTRINO_ACPI=y # CONFIG_X86_SPEEDSTEP_CENTRINO_TABLE is not set # CONFIG_X86_SPEEDSTEP_ICH is not set CONFIG_X86_SPEEDSTEP_SMI=y CONFIG_X86_SPEEDSTEP_LIB=y CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK=y CONFIG_CPU_FREQ=y CONFIG_CPU_FREQ_TABLE=y # CONFIG_CPU_FREQ_DEBUG is not set CONFIG_CPU_FREQ_STAT=y # CONFIG_CPU_FREQ_STAT_DETAILS is not set CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set CONFIG_CPU_FREQ_GOV_PERFORMANCE=y CONFIG_CPU_FREQ_GOV_POWERSAVE=m CONFIG_CPU_FREQ_GOV_USERSPACE=y CONFIG_CPU_FREQ_GOV_ONDEMAND=m CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m -- speedstep-smi doesn't load anymore on thinkpad t20 https://launchpad.net/bugs/35044 From dennis at kaarsemaker.net Thu Apr 27 15:39:18 2006 From: dennis at kaarsemaker.net (Dennis Kaarsemaker) Date: Thu, 27 Apr 2006 15:39:18 -0000 Subject: [Bug 41756] Re: [Bug 41756] Kernel NULL pointer dereference References: <20060427150815.30638.72174.malonedeb@gangotri.ubuntu.com> Message-ID: <1146152358.8791.24.camel@mirage> Is this reproducabel or was it a one-time issue? -- Kernel NULL pointer dereference https://launchpad.net/bugs/41756 From diamond+launchpad at nonado.net Thu Apr 27 15:36:02 2006 From: diamond+launchpad at nonado.net (Stephen Shirley) Date: Thu, 27 Apr 2006 15:36:02 -0000 Subject: [Bug 41746] Re: dapper kernel fails to do smp on pentium-d viiv References: <20060427133654.28955.83165.malonedeb@gandwana.ubuntu.com> Message-ID: <20060427153602.30606.92881.malone@gangotri.ubuntu.com> Installing a 686 kernel fixes this. If that's the recommended action, the question would be why the installer doesn't do this by default. Tested with: linux-image-2.6.15-21-686 -- dapper kernel fails to do smp on pentium-d viiv https://launchpad.net/bugs/41746 From ej.finneran at gmail.com Thu Apr 27 15:46:05 2006 From: ej.finneran at gmail.com (EJ Finneran) Date: Thu, 27 Apr 2006 15:46:05 -0000 Subject: [Bug 41756] Re: Kernel NULL pointer dereference References: <20060427150815.30638.72174.malonedeb@gangotri.ubuntu.com> Message-ID: <20060427154605.30638.96583.malone@gangotri.ubuntu.com> Unfortunatly, I don't know how to reproduce it. I'll post here if I find anything new. -- Kernel NULL pointer dereference https://launchpad.net/bugs/41756 From m.escardo at cs.bham.ac.uk Thu Apr 27 15:47:54 2006 From: m.escardo at cs.bham.ac.uk (Martin Escardo) Date: Thu, 27 Apr 2006 15:47:54 -0000 Subject: [Bug 35213] [Bug 35213] Re: [Bug 35213] Re: hibernate fails when not on AC power on HP Pavilion ZT3000 - regression from breezy References: <20060316170910.6510.54248.malonedeb@gangotri.ubuntu.com> <20060427150136.30606.27903.malone@gangotri.ubuntu.com> <4450DFB7.6010608@samwel.tk> Message-ID: <17488.59306.314838.421414@gargle.gargle.HOWL> Bart Samwell writes: > > (But why was it working under Breezy on the > > same machine?) > Because the included version 1.05 of laptop-mode-tools didn't do > writecache control. This was added in 1.06 and disabled by default in 1.20. Ah, I see. BTW: The installer I used (Flight 7) makes the swap smaller (~700Mb) than the RAM (1Gb in my case) by default. I paid attention to this this time, and took action, but under Breezy I failed to get hibernation working the first time because of this unreasonable default. Then I had to go through the trouble making a swap partition myself (after I discovered that this was wrong), setting grub parameters etc. I hope, for the sake of new Ubuntu laptop users, that this will be fixed in the installer for the release version! -- hibernate fails when not on AC power on HP Pavilion ZT3000 - regression from breezy https://launchpad.net/bugs/35213 From burner at suppressingfire.org Thu Apr 27 15:51:42 2006 From: burner at suppressingfire.org (Michael R. Head) Date: Thu, 27 Apr 2006 15:51:42 -0000 Subject: [Bug 35213] Re: hibernate fails when not on AC power on HP Pavilion ZT3000 - regression from breezy References: <20060316170910.6510.54248.malonedeb@gangotri.ubuntu.com> Message-ID: <20060427155142.30606.47106.malone@gangotri.ubuntu.com> I can report that disabling the writecache has allows my thinkpad T30 to hibernate while on battery. I'll keep testing this and report back if I get any hibernation failures in the future. -- hibernate fails when not on AC power on HP Pavilion ZT3000 - regression from breezy https://launchpad.net/bugs/35213 From burner at suppressingfire.org Thu Apr 27 16:07:38 2006 From: burner at suppressingfire.org (Michael R. Head) Date: Thu, 27 Apr 2006 16:07:38 -0000 Subject: [Bug 35213] Re: [Bug 35213] [Bug 35213] Re: [Bug 35213] Re: hibernate fails when not on AC power on HP Pavilion ZT3000 - regression from breezy References: <20060316170910.6510.54248.malonedeb@gangotri.ubuntu.com> <20060427150136.30606.27903.malone@gangotri.ubuntu.com> <4450DFB7.6010608@samwel.tk> <17488.59306.314838.421414@gargle.gargle.HOWL> Message-ID: <1146154059.5322.12.camel@localhost.localdomain> On Thu, 2006-04-27 at 15:47 +0000, Martin Escardo wrote: > Bart Samwell writes: > > Ah, I see. > > BTW: The installer I used (Flight 7) makes the swap smaller (~700Mb) > than the RAM (1Gb in my case) by default. I paid attention to this How big is your harddrive? -- Michael R. Head GPG: http://www.suppressingfire.org/~burner/gpg.key.txt [0x4C9DA1D0] -- hibernate fails when not on AC power on HP Pavilion ZT3000 - regression from breezy https://launchpad.net/bugs/35213 From m.escardo at cs.bham.ac.uk Thu Apr 27 16:36:19 2006 From: m.escardo at cs.bham.ac.uk (Martin Escardo) Date: Thu, 27 Apr 2006 16:36:19 -0000 Subject: [Bug 35213] [Bug 35213] Re: [Bug 35213] [Bug 35213] Re: [Bug 35213] Re: hibernate fails when not on AC power on HP Pavilion ZT3000 - regression from breezy References: <20060316170910.6510.54248.malonedeb@gangotri.ubuntu.com> <20060427150136.30606.27903.malone@gangotri.ubuntu.com> <4450DFB7.6010608@samwel.tk> <17488.59306.314838.421414@gargle.gargle.HOWL> <1146154059.5322.12.camel@localhost.localdomain> Message-ID: <17488.62211.693983.524523@gargle.gargle.HOWL> Michael R. Head writes: > > BTW: The installer I used (Flight 7) makes the swap smaller (~700Mb) > > than the RAM (1Gb in my case) by default. > > How big is your harddrive? Does that matter much? We are talking about a swap partition that is only 300Mb smaller than it should be for hibernation to work. The partition for dapper is >14GB at the moment. The hd is much bigger than that. But also for breezy, whose partition is >20Gb, the installation CD allocated less than the RAM. -- hibernate fails when not on AC power on HP Pavilion ZT3000 - regression from breezy https://launchpad.net/bugs/35213 From estudioz at leirianet.pt Thu Apr 27 17:58:30 2006 From: estudioz at leirianet.pt (Miguel Gaspar) Date: Thu, 27 Apr 2006 17:58:30 -0000 Subject: [Bug 41779] webcam error - ov511.c: No decompressor available References: <20060427175830.30606.4544.malonedeb@gangotri.ubuntu.com> Message-ID: <20060427175830.30606.4544.malonedeb@gangotri.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: Contrary to Ben Collins' status explanation, regarding bug #3717: This is fixed in dapper, but will not be fixed in breezy. , this bug still occurs in dapper, at least in the first beta. I tested with live-cd kubuntu, with the exact same problem. Steps to reproduce: Connect Philips ToUcam model 720K/00; syslog reports Apr 27 18:53:30 localhost kernel: [4295842.790000] usb 1-1: new full speed USB device using uhci_hcd and address 5 Apr 27 18:53:30 localhost kernel: [4295842.918000] drivers/usb/media/ov511/ov511.c: USB OV518 video device found Apr 27 18:53:30 localhost kernel: [4295842.919000] drivers/usb/media/ov511/ov511.c: Device revision 1 Apr 27 18:53:30 localhost kernel: [4295842.931000] drivers/usb/media/ov511/ov511.c: Compression required with OV518...enabling Apr 27 18:53:32 localhost kernel: [4295844.276000] drivers/usb/media/ov511/ov511.c: Sensor is an OV6630 Apr 27 18:53:32 localhost kernel: [4295844.479000] drivers/usb/media/ov511/ov511.c: Device at usb-0000:00:1d.0-1 registered to minor 0 The device appears in Device Manager, wich reports video4linux.device: /dev/video0 Then do cat /dev/video0 syslog says Apr 27 18:57:20 localhost kernel: [4296073.038000] drivers/usb/media/ov511/ov511.c: No decompressor available -- webcam error - ov511.c: No decompressor available https://launchpad.net/bugs/41779 From mail at carthik.net Thu Apr 27 18:05:41 2006 From: mail at carthik.net (Carthik Sharma) Date: Thu, 27 Apr 2006 18:05:41 -0000 Subject: [Bug 36089] Re: After Kernel update (3/21/2006) no sound References: <20060323010921.24660.83604.malonedeb@gandwana.ubuntu.com> Message-ID: <20060427180541.30606.86284.malone@gangotri.ubuntu.com> Closing this bug as the reporter says sound works now. Thank you for reporting this bug. ** Changed in: linux-source-2.6.15 linux-image-2.6.15-19-386 (Ubuntu) Status: Needs Info => Rejected -- After Kernel update (3/21/2006) no sound https://launchpad.net/bugs/36089 From esac.ubuntu at mailnull.com Thu Apr 27 18:56:49 2006 From: esac.ubuntu at mailnull.com (esac) Date: Thu, 27 Apr 2006 18:56:49 -0000 Subject: [Bug 23225] Re: Sony Vaio VGN-A190 doesn't power off without nolapic References: <20060113142235.21012.63046.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060427185649.30606.55772.malone@gangotri.ubuntu.com> Hi, This issue still exists for hibernate. It seems to work now for shutdown. -- Sony Vaio VGN-A190 doesn't power off without nolapic https://launchpad.net/bugs/23225 From jukka.hellen at gmail.com Thu Apr 27 19:49:43 2006 From: jukka.hellen at gmail.com (jhellen) Date: Thu, 27 Apr 2006 19:49:43 -0000 Subject: [Bug 34093] Re: USB drive opens nautilus in loops References: <20060308153940.28632.26727.malonedeb@gandwana.ubuntu.com> Message-ID: <20060427194943.28955.53127.malone@gandwana.ubuntu.com> I don't know if you are fixing this bug now but I still have the same problem even with the latest updates. -- USB drive opens nautilus in loops https://launchpad.net/bugs/34093 From ben.collins at ubuntu.com Thu Apr 27 20:12:08 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Thu, 27 Apr 2006 20:12:08 -0000 Subject: [Bug 35215] Re: ipw3945 driver required for functionality on new Intel PRO/Wireless 3945ABG Mini-PCI Express Adapters References: <20060316173707.11105.89035.malonedeb@gandwana.ubuntu.com> Message-ID: <20060427201209.30606.34799.malone@gangotri.ubuntu.com> Makefile is fixed in git. Upload should be tomorrow or Saturday. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: In Progress => Fix Committed -- ipw3945 driver required for functionality on new Intel PRO/Wireless 3945ABG Mini-PCI Express Adapters https://launchpad.net/bugs/35215 From ismael at nerim.net Thu Apr 27 20:20:04 2006 From: ismael at nerim.net (Jonathan ILIAS) Date: Thu, 27 Apr 2006 20:20:04 -0000 Subject: [Bug 31527] Re: DRI locks up the machine when starting X on a Radeon 9250 References: <20060215163856.15884.24165.malonedeb@gangotri.ubuntu.com> Message-ID: <20060427202004.30638.77145.malone@gangotri.ubuntu.com> I got the same bug with both Debian and Dapper... Looking through the web I got this : http://www.spinics.net/lists/xorg/msg14673.html I tried version 6.5.8 version of xserver-xorg-video-ati package on my Debian etch+unstable (mixed) and DRI works since a few minutes from now. This is not really a fix for Ubuntu, but maybe this would be useful to know this fix here (as I often fall here when I look for informations about this bug). And many thanks to Benjamin Herrenschmidt and all people who do great work for our best enjoyment ! :) -- DRI locks up the machine when starting X on a Radeon 9250 https://launchpad.net/bugs/31527 From dennis at kaarsemaker.net Thu Apr 27 20:30:00 2006 From: dennis at kaarsemaker.net (Dennis Kaarsemaker) Date: Thu, 27 Apr 2006 20:30:00 -0000 Subject: [Bug 41756] Re: [Bug 41756] Re: Kernel NULL pointer dereference References: <20060427150815.30638.72174.malonedeb@gangotri.ubuntu.com> <20060427154605.30638.96583.malone@gangotri.ubuntu.com> Message-ID: <1146169800.8791.42.camel@mirage> Please disable all binary-only modules when doing that. Kernel bugs with a tainted kernel are generally much harder to solve. I'll reject the bug for now, but please reopen when you can reproduce it. status Rejected ** Changed in: linux-meta linux-image-2.6-k7 (Ubuntu) Status: Unconfirmed => Rejected -- Kernel NULL pointer dereference https://launchpad.net/bugs/41756 From ueluei at gmail.com Thu Apr 27 20:47:36 2006 From: ueluei at gmail.com (ueluei) Date: Thu, 27 Apr 2006 20:47:36 -0000 Subject: [Bug 37164] Re: sky2 ethernet driver problems References: <20060329134103.6279.17661.malonedeb@gandwana.ubuntu.com> Message-ID: <20060427204736.30638.98989.malone@gangotri.ubuntu.com> I have exactly the same problem with my Sony Vaio VGN-SZ1HP/B -- sky2 ethernet driver problems https://launchpad.net/bugs/37164 From lakin.wecker at gmail.com Thu Apr 27 22:23:33 2006 From: lakin.wecker at gmail.com (Lakin Wecker) Date: Thu, 27 Apr 2006 22:23:33 -0000 Subject: [Bug 13682] Re: psmouse incompatible with KVM switching References: <20060113133231.21012.21333.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060427222333.30606.85992.launchpad@gangotri.ubuntu.com> ** Bug 18176 has been marked a duplicate of this bug -- psmouse incompatible with KVM switching https://launchpad.net/bugs/13682 From lakin.wecker at gmail.com Thu Apr 27 22:27:35 2006 From: lakin.wecker at gmail.com (Lakin Wecker) Date: Thu, 27 Apr 2006 22:27:35 -0000 Subject: [Bug 18176] Re: ubuntu does not handle Belkin f1db104p kvm switch References: <20060113135508.21012.2347.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060427222735.30638.1064.malone@gangotri.ubuntu.com> *** This bug is a duplicate of bug 13682 *** This bug seems to be a duplicate of #13682, marking it as such. Can the original reports please re-test with the dapper and see if the problem still exists? ** This bug has been marked a duplicate of bug 13682 psmouse incompatible with KVM switching ** Changed in: Ubuntu Status: Unconfirmed => Rejected -- ubuntu does not handle Belkin f1db104p kvm switch https://launchpad.net/bugs/18176 From mroth at sims.berkeley.edu Thu Apr 27 22:41:32 2006 From: mroth at sims.berkeley.edu (mroth) Date: Thu, 27 Apr 2006 22:41:32 -0000 Subject: [Bug 30984] Re: (Dapper) kernel 2.6.15.15-686 breaks freq scaling on core duo References: <20060209172346.25235.19539.malonedeb@gangotri.ubuntu.com> Message-ID: <20060427224132.28955.16223.malone@gandwana.ubuntu.com> Confirming this still exists on my Core Duo laptop with Dapper nightlies. A bump in powernowd seems like a good idea. -- (Dapper) kernel 2.6.15.15-686 breaks freq scaling on core duo https://launchpad.net/bugs/30984 From daniel.serpell at aplik.cl Thu Apr 27 23:24:33 2006 From: daniel.serpell at aplik.cl (Daniel Serpell) Date: Thu, 27 Apr 2006 23:24:33 -0000 Subject: [Bug 38333] Re: Hibernation stopped working with Flight 6 on Dell Latitude 110l References: <20060406065824.24486.88971.malonedeb@gangotri.ubuntu.com> Message-ID: <20060427232433.30638.35758.malone@gangotri.ubuntu.com> I have the same problem, my laptop is an Acer 3623. I also installed using espresso install, and the file /etc/mkinitramfs/conf.d/resume is not available. I will try the fix soon. -- Hibernation stopped working with Flight 6 on Dell Latitude 110l https://launchpad.net/bugs/38333 From nahs777 at gmail.com Fri Apr 28 01:04:18 2006 From: nahs777 at gmail.com (nahs) Date: Fri, 28 Apr 2006 01:04:18 -0000 Subject: [Bug 41812] Can't boot in certain system. References: <20060428010418.28955.28833.malonedeb@gandwana.ubuntu.com> Message-ID: <20060428010418.28955.28833.malonedeb@gandwana.ubuntu.com> Public bug reported: Affects: linux-meta linux-image-2.6-386 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: Can't boot with installation CDs and Live CDs. Also breezy or earlier can't boot, either. System spec is. Asrock Dual Series (ULI 1697 + 1695) AMD 64 3700+ Samsung DDR 3200 1G MSI X700 Pro (ati chipset) TSST Combo drive. with Installation disc. system halted when i type enter to load kernels. no other messeage was appeared. -- Can't boot in certain system. https://launchpad.net/bugs/41812 From bddebian at comcast.net Fri Apr 28 01:30:51 2006 From: bddebian at comcast.net (Barry deFreese) Date: Fri, 28 Apr 2006 01:30:51 -0000 Subject: [Bug 24533] Re: Fail to boot smp kernel References: <20060113142932.21012.10689.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060428013051.29040.98383.malone@gandwana.ubuntu.com> I hate to ask this but are you sure this isn't a hardware issue? Have you tried kernels from any other distros or maybe even run another OS that you know detects it as smp? I know some of the early HT Pentiums have issues. Thanks for your report. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Unconfirmed => Needs Info -- Fail to boot smp kernel https://launchpad.net/bugs/24533 From bddebian at comcast.net Fri Apr 28 02:21:03 2006 From: bddebian at comcast.net (Barry deFreese) Date: Fri, 28 Apr 2006 02:21:03 -0000 Subject: [Bug 29299] Re: Laptop Mission: Tecra M2 does not reboot in Dapper References: <20060121163034.28441.92217.malonedeb@gangotri.ubuntu.com> Message-ID: <20060428022103.30638.85886.malone@gangotri.ubuntu.com> Still and issue with Flight 6? Thank you. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Unconfirmed => Needs Info -- Laptop Mission: Tecra M2 does not reboot in Dapper https://launchpad.net/bugs/29299 From bddebian at comcast.net Fri Apr 28 02:27:32 2006 From: bddebian at comcast.net (Barry deFreese) Date: Fri, 28 Apr 2006 02:27:32 -0000 Subject: [Bug 29420] Re: Strange clock behaviour on powerpc-smp References: <20060123071446.16602.91711.malonedeb@gandwana.ubuntu.com> Message-ID: <20060428022732.29040.30171.launchpad@gandwana.ubuntu.com> ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Unconfirmed => Confirmed -- Strange clock behaviour on powerpc-smp https://launchpad.net/bugs/29420 From cbinusa at gmail.com Fri Apr 28 02:35:05 2006 From: cbinusa at gmail.com (cbinusa) Date: Fri, 28 Apr 2006 02:35:05 -0000 Subject: [Bug 38473] Re: [Bug 38473] Re: [atheos] DWL-g650 not configurable References: <20060406190702.24516.69199.malonedeb@gangotri.ubuntu.com> <20060422085715.17670.20633.launchpad@gandwana.ubuntu.com> Message-ID: The latest kernel download fixed this. Thanks for your help. On 4/22/06, Sitsofe Wheeler wrote: > ** Summary changed: > > - DWL-g650 not configurable > + [atheos] DWL-g650 not configurable > > ** Summary changed: > > - [atheos] DWL-g650 not configurable > + [atheros] DWL-g650 not configurable > > -- > [atheros] DWL-g650 not configurable > https://launchpad.net/bugs/38473 > -- [atheros] DWL-g650 not configurable https://launchpad.net/bugs/38473 From bddebian at comcast.net Fri Apr 28 04:42:23 2006 From: bddebian at comcast.net (Barry deFreese) Date: Fri, 28 Apr 2006 04:42:23 -0000 Subject: [Bug 36967] Re: No turn off of PC References: <20060328083924.20514.99055.malonedeb@gangotri.ubuntu.com> Message-ID: <20060428044223.29040.60209.malone@gandwana.ubuntu.com> Do you still have this problem with 2.6.15-20 ? Thank you. ** Changed in: linux-source-2.6.15 linux-image-2.6.15-19-686 (Ubuntu) Status: Unconfirmed => Needs Info -- No turn off of PC https://launchpad.net/bugs/36967 From correia at brutele.be Fri Apr 28 05:05:56 2006 From: correia at brutele.be (Antonio Ricardo Soares da Silva Correia) Date: Fri, 28 Apr 2006 05:05:56 -0000 Subject: [Bug 24533] Re: [Bug 24533] Re: Fail to boot smp kernel References: <20060113142932.21012.10689.launchpad@macquarie.warthogs.hbd.com> <20060428013051.29040.98383.malone@gandwana.ubuntu.com> Message-ID: <200604280706.00303.correia@brutele.be> Yes, I tried several distros. It works fine with Mandriva, Knopix (live CD) and even with a Debian. I only have this problem with Ubuntu/Kubuntu so I think it's not a hardware issue. Best regards, Antonio > I hate to ask this but are you sure this isn't a hardware issue? Have > you tried kernels from any other distros or maybe even run another OS > that you know detects it as smp? I know some of the early HT Pentiums > have issues. Thanks for your report. > > ** Changed in: linux-source-2.6.15 (Ubuntu) > Status: Unconfirmed => Needs Info -- Fail to boot smp kernel https://launchpad.net/bugs/24533 From launchpad at taggedtype.net Fri Apr 28 06:10:20 2006 From: launchpad at taggedtype.net (sohail) Date: Fri, 28 Apr 2006 06:10:20 -0000 Subject: [Bug 30570] Re: CPU usage very high with no running tasks using it References: <20060205163505.29619.50181.malonedeb@gangotri.ubuntu.com> Message-ID: <20060428061020.28955.17934.malone@gandwana.ubuntu.com> *** This bug is a duplicate of bug 30557 *** Same problem on Dell XPS Gen 2 (Pentium M 2.13GHz) and same workaround (installing 386 kernel) This problem did not occur with breezy. -- CPU usage very high with no running tasks using it https://launchpad.net/bugs/30570 From crimsun at fungus.sh.nu Fri Apr 28 06:18:52 2006 From: crimsun at fungus.sh.nu (Daniel T Chen) Date: Fri, 28 Apr 2006 06:18:52 -0000 Subject: [Bug 40158] Re: TerraTec DMX 6Fire 24/96 front S/PDIF coaxial input not working. References: <20060419130039.8468.60497.malonedeb@gandwana.ubuntu.com> Message-ID: <20060428061853.30638.87485.malone@gangotri.ubuntu.com> https://lists.ubuntu.com/archives/kernel-team/2006-April/000853.html ** Changed in: linux-source-2.6.15 (Ubuntu) Status: In Progress => Fix Committed -- TerraTec DMX 6Fire 24/96 front S/PDIF coaxial input not working. https://launchpad.net/bugs/40158 From andrew+ubuntu at jorgensenfamily.us Fri Apr 28 06:22:35 2006 From: andrew+ubuntu at jorgensenfamily.us (Andrew Jorgensen) Date: Fri, 28 Apr 2006 06:22:35 -0000 Subject: [Bug 37120] Re: wpasupplicant doesn't work properly with rt2500 driver References: <20060329054652.7313.48354.malonedeb@gangotri.ubuntu.com> Message-ID: <20060428062235.28955.65537.malone@gandwana.ubuntu.com> The bug as stated still remains but it appears that network-manager is working again. Did someone modify it so that it falls back to controlling the interface itself if it knows that wpa-supplicant can't handle it? -- wpasupplicant doesn't work properly with rt2500 driver https://launchpad.net/bugs/37120 From dennis at kaarsemaker.net Fri Apr 28 06:25:01 2006 From: dennis at kaarsemaker.net (Dennis Kaarsemaker) Date: Fri, 28 Apr 2006 06:25:01 -0000 Subject: [Bug 38473] Re: [atheros] DWL-g650 not configurable References: <20060406190702.24516.69199.malonedeb@gangotri.ubuntu.com> Message-ID: <20060428062501.30606.26156.malone@gangotri.ubuntu.com> Fixed according to user. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Needs Info => Fix Released -- [atheros] DWL-g650 not configurable https://launchpad.net/bugs/38473 From adconrad at 0c3.net Fri Apr 28 06:30:03 2006 From: adconrad at 0c3.net (Adam Conrad) Date: Fri, 28 Apr 2006 06:30:03 -0000 Subject: [Bug 30766] Re: default firmware not working for acx d-link dwl-g650+ References: <20060207221213.32736.87495.malonedeb@gandwana.ubuntu.com> Message-ID: <20060428063003.30606.7201.launchpad@gangotri.ubuntu.com> ** Changed in: linux-restricted-modules-2.6.15 (Ubuntu) Status: Confirmed => Rejected -- default firmware not working for acx d-link dwl-g650+ https://launchpad.net/bugs/30766 From arnaud.mazin at gmail.com Fri Apr 28 06:32:32 2006 From: arnaud.mazin at gmail.com (Arnaud) Date: Fri, 28 Apr 2006 06:32:32 -0000 Subject: [Bug 35319] Re: no Fn at all Vaio SZ1XP Dapper References: <20060317124552.11105.6446.malonedeb@gandwana.ubuntu.com> Message-ID: <20060428063232.28955.59888.malone@gandwana.ubuntu.com> Glad it could help. The patch has been submitted in the lkml and is now included in the 2.6.17rc3 kernel. Cheers. -- no Fn at all Vaio SZ1XP Dapper https://launchpad.net/bugs/35319 From anders.hem at gmail.com Fri Apr 28 06:49:26 2006 From: anders.hem at gmail.com (Anders H) Date: Fri, 28 Apr 2006 06:49:26 -0000 Subject: [Bug 36967] Re: [Bug 36967] Re: No turn off of PC References: <20060328083924.20514.99055.malonedeb@gangotri.ubuntu.com> <20060428044223.29040.60209.malone@gandwana.ubuntu.com> Message-ID: <4451BAF6.3060300@gmail.com> Hi, Thanks for your reply. I can confirm that the problem still exists with the latest dapper kernel updates. I also found on dapper forum that some other had posted the same problem. best regards, Anders hidmark Barry deFreese skrev: > Do you still have this problem with 2.6.15-20 ? Thank you. > > ** Changed in: linux-source-2.6.15 linux-image-2.6.15-19-686 (Ubuntu) > Status: Unconfirmed => Needs Info > > -- No turn off of PC https://launchpad.net/bugs/36967 From kigurai at gmail.com Fri Apr 28 07:32:37 2006 From: kigurai at gmail.com (=?utf-8?q?Hannes_Holm_Ovr=C3=A9n?=) Date: Fri, 28 Apr 2006 07:32:37 -0000 Subject: [Bug 41589] kIrDAd uses ~100% CPU References: <20060426144409.28879.48964.malonedeb@gandwana.ubuntu.com> Message-ID: <20060428073237.30638.20684.launchpad@canonical@gangotri.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Major Priority: (none set) Status: Unconfirmed Description: I have recently been commenting and filing bugs about frequency scaling not working on my computer, because it was running hot. But, I just noticed that it wasn't the scaling that was bad, but a process named "kIrDAd" that was stealing almost all my processing power, and thus making the computer go hot. I was not sure under what package to file this bug. In kernel 2.6.15-19-386 I don't have this problem, but then it seems like no ir modules are loaded, and I can't sync with my cellphone. Booting into the 2.6.15-21 kernel where this problem occurs, and trying to kill the evil process didn't do anything good. after that I could not even reboot. -- kIrDAd uses ~100% CPU https://launchpad.net/bugs/41589 From kigurai at gmail.com Fri Apr 28 07:32:36 2006 From: kigurai at gmail.com (=?utf-8?q?Hannes_Holm_Ovr=C3=A9n?=) Date: Fri, 28 Apr 2006 07:32:36 -0000 Subject: [Bug 41589] Re: kIrDAd uses ~100% CPU References: <20060426144409.28879.48964.malonedeb@gandwana.ubuntu.com> Message-ID: <20060428073237.30638.91496.launchpad@gangotri.ubuntu.com> ** Changed in: Ubuntu Sourcepackagename: None => linux-source-2.6.15 -- kIrDAd uses ~100% CPU https://launchpad.net/bugs/41589 From mpbretl at gmail.com Fri Apr 28 08:35:03 2006 From: mpbretl at gmail.com (Matt Bretl) Date: Fri, 28 Apr 2006 08:35:03 -0000 Subject: [Bug 36667] Dapper Beta: Boot process stalls on "Mounting root filesystem..." References: <20060326030146.20514.59826.malonedeb@gangotri.ubuntu.com> Message-ID: <20060428083503.30606.9403.launchpad@canonical@gangotri.ubuntu.com> Public bug reported: Affects: Ubuntu Severity: Major Priority: (none set) Status: Rejected Affects: linux-source-2.6.15 (Ubuntu) Severity: Major Priority: (none set) Status: Confirmed Description: I have not been able to boot from the Flight 4, Flight 5, Flight 6, or Beta LiveCDs on my desktop system. Here's the full walkthrough: 1. I press Enter to select "Start Ubuntu". The system displays "Loading essential drivers" and then stalls on the next line, "Mounting root filesystem..." The orange IDE activity LED stays fully lit for about a minute. 2. Eventually, the splash screen disappears, and following is displayed: Uncompressing Linux... Ok, booting the kernel. hdc: ide_intr: huh? expected NULL handler on exit hdc: ide_intr: huh? expected NULL handler on exit Buffer I/O error on device hdc, logical block 156349 hdc: ide_intr: huh? expected NULL handler on exit hdc: ide_intr: huh? expected NULL handler on exit Buffer I/O error on device hdc, logical block 156349 hdc: ide_intr: huh? expected NULL handler on exit hdc: ide_intr: huh? expected NULL handler on exit Buffer I/O error on device hdc, logical block 156349 hdc: ide_intr: huh? expected NULL handler on exit hdc: ide_intr: huh? expected NULL handler on exit Buffer I/O error on device hdc, logical block 156349 Shadow passwords are now on. Generating locales... en_US.UTF-8... up-to-date Generation complete. md5sum: /etc/X11/xorg.conf: No such file or directory * Preparing restricted drivers... * Starting basic networking... * Starting kernel event manager... * Loading hardware drivers... * Starting PCMCIA services... * PCMCIA not present. * Loading manual drivers... mount: Function not implemented * Starting RAID devices... The first 13 lines creep along (each line takes ~10 seconds to display), but the rest of the boot process continues at a fairly normal pace. 3. Eventually, the boot "finishes" and the screen goes blank. I hear the bassline of the GDM login screen, but there's no image. My monitor's indicator light blinks, and I tried turning it on and off, and hitting Auto... nothing. I can Ctrl-Alt-Backspace to a prompt, and perform some basic commands. Networking (and obviously sound) work just fine. "startx" takes me right back to a blank screen. Starting in safe graphics mode yielded the exact same result. I checked /var/log/Xorg.0.log for anything abnormal, and there were a few messages about the 200-some Mhz and 150-some MHz being higher than acceptable, which was 140 MHz. Sorry if the numbers are off. Specs: AMD Athlon 2400+ ASUS A7N8X Deluxe nVidia GeForce FX 5200 Samsung TS-H552U DVD-RW/CD-RW Drive -- Dapper Beta: Boot process stalls on "Mounting root filesystem..." https://launchpad.net/bugs/36667 From siretart at tauware.de Fri Apr 28 08:33:38 2006 From: siretart at tauware.de (Reinhard Tartler) Date: Fri, 28 Apr 2006 08:33:38 -0000 Subject: [Bug 37120] Re: wpasupplicant doesn't work properly with rt2500 driver References: <20060329054652.7313.48354.malonedeb@gangotri.ubuntu.com> Message-ID: <20060428083339.30638.84160.malone@gangotri.ubuntu.com> In what cases does network-manager work again for you? according to https://launchpad.net/distros/ubuntu/dapper/+source/network-manager/+changelog network-manager does no longer use wpasupplicant for unencrypted networks. wpasupplicant had a bug which prevent WEP to be used with the wext driver backend, which has been fixed by the last upload -- wpasupplicant doesn't work properly with rt2500 driver https://launchpad.net/bugs/37120 From adconrad at 0c3.net Fri Apr 28 08:35:03 2006 From: adconrad at 0c3.net (Adam Conrad) Date: Fri, 28 Apr 2006 08:35:03 -0000 Subject: [Bug 36667] Re: Dapper Beta: Boot process stalls on "Mounting root filesystem..." References: <20060326030146.20514.59826.malonedeb@gangotri.ubuntu.com> Message-ID: <20060428083503.30606.77837.malone@gangotri.ubuntu.com> These don't look like initramfs issues to me. Not sure why they landed on my plate. ** Changed in: initramfs-tools (Ubuntu) Sourcepackagename: initramfs-tools => linux-source-2.6.15 -- Dapper Beta: Boot process stalls on "Mounting root filesystem..." https://launchpad.net/bugs/36667 From adconrad at 0c3.net Fri Apr 28 08:40:45 2006 From: adconrad at 0c3.net (Adam Conrad) Date: Fri, 28 Apr 2006 08:40:45 -0000 Subject: [Bug 23787] Re: Wrong firmware loaded for acx_pci References: <20060113142541.21012.73152.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060428084046.29040.95823.malone@gandwana.ubuntu.com> Aiming this bug at the right source package, so it's easier to track. ** Changed in: Ubuntu Sourcepackagename: None => linux-source-2.6.15 Assignee: Adam Conrad => Ben Collins -- Wrong firmware loaded for acx_pci https://launchpad.net/bugs/23787 From martin.pitt at ubuntu.com Fri Apr 28 08:54:30 2006 From: martin.pitt at ubuntu.com (Martin Pitt) Date: Fri, 28 Apr 2006 08:54:30 -0000 Subject: [Bug 35695] Re: Please change sys/dev/cdrom/lock default to 0 References: <20060320101930.22884.76380.malonedeb@gangotri.ubuntu.com> Message-ID: <20060428085430.30638.69080.malone@gangotri.ubuntu.com> FWIW, with yesterday's fix to gnome-volume-manager, using the drive's eject button should now work fine on the majority of drives, so fixing this at the kernel level is not that important any more. ** Changed in: linux-source-2.6.15 (Ubuntu) Severity: Normal => Wishlist -- Please change sys/dev/cdrom/lock default to 0 https://launchpad.net/bugs/35695 From mpbretl at gmail.com Fri Apr 28 09:21:46 2006 From: mpbretl at gmail.com (Matt Bretl) Date: Fri, 28 Apr 2006 09:21:46 -0000 Subject: [Bug 37120] Re: wpasupplicant doesn't work properly with rt2500 driver References: <20060329054652.7313.48354.malonedeb@gangotri.ubuntu.com> Message-ID: <20060428092146.30606.38120.malone@gangotri.ubuntu.com> I just tried the latest network-manager (0.6.2-0ubuntu3), but still can't connect using 64-bit WEP. 0.5.1-19 works like a charm. -- wpasupplicant doesn't work properly with rt2500 driver https://launchpad.net/bugs/37120 From karvinen+launchpad at iki.fi Fri Apr 28 09:25:36 2006 From: karvinen+launchpad at iki.fi (Tero Karvinen) Date: Fri, 28 Apr 2006 09:25:36 -0000 Subject: [Bug 38839] Re: Fails to boot on a centrino laptop References: <20060409091928.32233.9591.malonedeb@gandwana.ubuntu.com> Message-ID: <20060428092536.29040.25880.malone@gandwana.ubuntu.com> Booted normally with Dapper 6.06 beta 2 live cd. Thanks for the fix. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Needs Info => Fix Released -- Fails to boot on a centrino laptop https://launchpad.net/bugs/38839 From karvinen+launchpad at iki.fi Fri Apr 28 09:34:08 2006 From: karvinen+launchpad at iki.fi (Tero Karvinen) Date: Fri, 28 Apr 2006 09:34:08 -0000 Subject: [Bug 38841] Re: Peripherals not found (without using "irqpool") References: <20060409092246.24516.35194.malonedeb@gangotri.ubuntu.com> Message-ID: <20060428093408.28955.51830.malone@gandwana.ubuntu.com> Works on the same computer with Dapper 6.06 beta 2 live. Thanks for the fix! ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Unconfirmed => Fix Released -- Peripherals not found (without using "irqpool") https://launchpad.net/bugs/38841 From karvinen+launchpad at iki.fi Fri Apr 28 09:31:30 2006 From: karvinen+launchpad at iki.fi (Tero Karvinen) Date: Fri, 28 Apr 2006 09:31:30 -0000 Subject: [Bug 33372] Re: Cannot wake up from suspend and hibernate References: <20060302085058.17498.86100.malonedeb@gangotri.ubuntu.com> Message-ID: <20060428093130.30606.93042.malone@gangotri.ubuntu.com> This problem is still present in Dapper 6.06 beta 2 live. When trying to wake from suspend-to-RAM (sleep, S3), the screen blinks now. Caps lock light changes state. Trying to change virtual console blinks screen, but virtual consoles don't work either. Fan stays off. Alt-ctrl-del and alt-ctrl-backspace don't work. -- Cannot wake up from suspend and hibernate https://launchpad.net/bugs/33372 From siretart at tauware.de Fri Apr 28 09:35:18 2006 From: siretart at tauware.de (Reinhard Tartler) Date: Fri, 28 Apr 2006 09:35:18 -0000 Subject: [Bug 37120] Re: [Bug 37120] Re: wpasupplicant doesn't work properly with rt2500 driver References: <20060329054652.7313.48354.malonedeb@gangotri.ubuntu.com> <20060428092146.30606.38120.malone@gangotri.ubuntu.com> Message-ID: <20060428093518.GA27222@tauware.de> what version of wpa_supplicant? -- wpasupplicant doesn't work properly with rt2500 driver https://launchpad.net/bugs/37120 From dicicat at free.fr Fri Apr 28 10:19:54 2006 From: dicicat at free.fr (DiCiCat) Date: Fri, 28 Apr 2006 10:19:54 -0000 Subject: [Bug 41862] ISL3886 wireless card doesn't work with wep and islsm_pci driver References: <20060428101954.30638.87873.malonedeb@gangotri.ubuntu.com> Message-ID: <20060428101954.30638.87873.malonedeb@gangotri.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 linux-image-2.6.15-21-686 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: Hello, It seems impossible tu assign a wep key to an isl3886 wireless card. sudo iwconfig eth1 key 1234567890 wrote: Error for wireless request "Set Encode" (8B2A) : SET failed on device eth1 ; Invalid argument. The card seems work correctly without encryptation. Same problem (and perhaps a solution?) have been reported here http://prism54.org/punbb/viewtopic.php?id=1562 ** Changed in: linux-source-2.6.15 linux-image-2.6.15-21-686 (Ubuntu) Status: Unconfirmed => Confirmed ** Changed in: linux-source-2.6.15 linux-image-2.6.15-21-686 (Ubuntu) Status: Confirmed => Unconfirmed -- ISL3886 wireless card doesn't work with wep and islsm_pci driver https://launchpad.net/bugs/41862 From harbaugh at ncifcrf.gov Fri Apr 28 10:31:59 2006 From: harbaugh at ncifcrf.gov (Toni Harbaugh-Blackford) Date: Fri, 28 Apr 2006 10:31:59 -0000 Subject: [Bug 33431] Re: powerpc64 install via firewire cd fails References: <20060302162626.17525.23476.malonedeb@gangotri.ubuntu.com> Message-ID: <20060428103159.30638.46605.malone@gangotri.ubuntu.com> gentoo 2006.0 has the same problem. It appears to be due to missing serial drivers for slightly older Xserve models. see gentoo bug 131356 -- powerpc64 install via firewire cd fails https://launchpad.net/bugs/33431 From harbaugh at ncifcrf.gov Fri Apr 28 10:36:22 2006 From: harbaugh at ncifcrf.gov (Toni Harbaugh-Blackford) Date: Fri, 28 Apr 2006 10:36:22 -0000 Subject: [Bug 33431] Re: powerpc64 install via firewire cd fails References: <20060302162626.17525.23476.malonedeb@gangotri.ubuntu.com> Message-ID: <20060428103622.28955.89371.malone@gandwana.ubuntu.com> the link to the gentoo bug is http://bugs.gentoo.org/show_bug.cgi?id=131356 FYI, I tried the dapper sever build from 4/24 and it still hangs after DO-QUIESCE finished -- powerpc64 install via firewire cd fails https://launchpad.net/bugs/33431 From dicicat at free.fr Fri Apr 28 11:00:34 2006 From: dicicat at free.fr (DiCiCat) Date: Fri, 28 Apr 2006 11:00:34 -0000 Subject: [Bug 41862] Re: ISL3886 wireless card doesn't work with wep and islsm_pci driver References: <20060428101954.30638.87873.malonedeb@gangotri.ubuntu.com> Message-ID: <20060428110034.29040.57542.launchpad@gandwana.ubuntu.com> ** Changed in: linux-source-2.6.15 linux-image-2.6.15-21-686 (Ubuntu) Status: Unconfirmed => Confirmed -- ISL3886 wireless card doesn't work with wep and islsm_pci driver https://launchpad.net/bugs/41862 From mpbretl at gmail.com Fri Apr 28 11:00:36 2006 From: mpbretl at gmail.com (Matt Bretl) Date: Fri, 28 Apr 2006 11:00:36 -0000 Subject: [Bug 37120] Re: wpasupplicant doesn't work properly with rt2500 driver References: <20060329054652.7313.48354.malonedeb@gangotri.ubuntu.com> Message-ID: <20060428110036.28955.58436.malone@gandwana.ubuntu.com> wpasupplicant-0.4.8-3ubuntu1 (the latest AFAIK) -- wpasupplicant doesn't work properly with rt2500 driver https://launchpad.net/bugs/37120 From ejopzee at veninga2.fol.nl Fri Apr 28 12:13:28 2006 From: ejopzee at veninga2.fol.nl (erik veninga) Date: Fri, 28 Apr 2006 12:13:28 -0000 Subject: [Bug 33372] Re: Cannot wake up from suspend and hibernate References: <20060302085058.17498.86100.malonedeb@gangotri.ubuntu.com> Message-ID: <20060428121328.30606.55779.malone@gangotri.ubuntu.com> Problem also present at 28-4-06 on acer aspire 1312LC. Upgraded to dapper yesterday and updated to today. With kernel 2.6.15-21-k7. With the old kernel 2.6.12-10-k7, sleep is working however hibernating not. -- Cannot wake up from suspend and hibernate https://launchpad.net/bugs/33372 From cjwatson at canonical.com Fri Apr 28 12:23:24 2006 From: cjwatson at canonical.com (Colin Watson) Date: Fri, 28 Apr 2006 12:23:24 -0000 Subject: [Bug 33431] Re: powerpc64 install via firewire cd fails References: <20060302162626.17525.23476.malonedeb@gangotri.ubuntu.com> Message-ID: <20060428122324.30638.54294.launchpad@gangotri.ubuntu.com> ** Bug watch added: Gentoo Bugzilla #131356 http://bugs.gentoo.org/show_bug.cgi?id=131356 -- powerpc64 install via firewire cd fails https://launchpad.net/bugs/33431 From scott at ubuntu.com Fri Apr 28 12:29:40 2006 From: scott at ubuntu.com (Scott James Remnant) Date: Fri, 28 Apr 2006 12:29:40 -0000 Subject: [Bug 37795] Re: zd1211 wireless driver broken, too old (20050315) References: <20060403011323.23733.67873.malonedeb@gandwana.ubuntu.com> Message-ID: <20060428122940.28955.4730.launchpad@gandwana.ubuntu.com> ** Bug 34214 has been marked a duplicate of this bug -- zd1211 wireless driver broken, too old (20050315) https://launchpad.net/bugs/37795 From scott at ubuntu.com Fri Apr 28 12:29:40 2006 From: scott at ubuntu.com (Scott James Remnant) Date: Fri, 28 Apr 2006 12:29:40 -0000 Subject: [Bug 34214] Re: zd1211 reports as a wired interface References: <20060309151624.28632.34679.malonedeb@gandwana.ubuntu.com> Message-ID: <20060428122940.28955.51693.launchpad@gandwana.ubuntu.com> *** This bug is a duplicate of bug 37795 *** ** This bug has been marked a duplicate of bug 37795 zd1211 wireless driver broken, too old (20050315) -- zd1211 reports as a wired interface https://launchpad.net/bugs/34214 From scott at ubuntu.com Fri Apr 28 12:36:35 2006 From: scott at ubuntu.com (Scott James Remnant) Date: Fri, 28 Apr 2006 12:36:35 -0000 Subject: [Bug 37120] Re: wpasupplicant doesn't work properly with rt2500 driver References: <20060329054652.7313.48354.malonedeb@gangotri.ubuntu.com> Message-ID: <20060428123635.30606.38224.malone@gangotri.ubuntu.com> Sounds like a clear wpasupplicant problem! ** Changed in: network-manager (Ubuntu) Sourcepackagename: network-manager => wpasupplicant -- wpasupplicant doesn't work properly with rt2500 driver https://launchpad.net/bugs/37120 From breuer at iam.uni-bonn.de Fri Apr 28 12:48:47 2006 From: breuer at iam.uni-bonn.de (bu) Date: Fri, 28 Apr 2006 12:48:47 -0000 Subject: [Bug 41141] Re: Kernel 2.6.15-21 does not boot References: <20060424173442.13783.39505.malonedeb@gangotri.ubuntu.com> Message-ID: <20060428124848.29040.99310.launchpad@gandwana.ubuntu.com> *** This bug is a duplicate of bug 41061 *** ** This bug has been marked a duplicate of bug 41061 Boot failure on SCSI disk -- Kernel 2.6.15-21 does not boot https://launchpad.net/bugs/41141 From breuer at iam.uni-bonn.de Fri Apr 28 12:48:47 2006 From: breuer at iam.uni-bonn.de (bu) Date: Fri, 28 Apr 2006 12:48:47 -0000 Subject: [Bug 41061] Re: Boot failure on SCSI disk References: <20060424090127.17643.31977.malonedeb@gandwana.ubuntu.com> Message-ID: <20060428124848.29040.26672.launchpad@gandwana.ubuntu.com> ** Bug 41141 has been marked a duplicate of this bug -- Boot failure on SCSI disk https://launchpad.net/bugs/41061 From martin.pitt at ubuntu.com Fri Apr 28 12:46:00 2006 From: martin.pitt at ubuntu.com (Martin Pitt) Date: Fri, 28 Apr 2006 12:46:00 -0000 Subject: [Bug 35695] Re: Please change sys/dev/cdrom/lock default to 0 References: <20060320101930.22884.76380.malonedeb@gangotri.ubuntu.com> Message-ID: <20060428124600.30606.63128.launchpad@gangotri.ubuntu.com> ** Changed in: procps (Ubuntu) Severity: Minor => Wishlist -- Please change sys/dev/cdrom/lock default to 0 https://launchpad.net/bugs/35695 From siretart at tauware.de Fri Apr 28 13:11:10 2006 From: siretart at tauware.de (Reinhard Tartler) Date: Fri, 28 Apr 2006 13:11:10 -0000 Subject: [Bug 37120] Re: wpasupplicant doesn't work properly with rt2500 driver References: <20060329054652.7313.48354.malonedeb@gangotri.ubuntu.com> Message-ID: <20060428131110.28955.27041.malone@gandwana.ubuntu.com> No, it is a rt2500 driver problem. It doesn't want to be used with wpasupplicant at all, because it seems to bring in an own supplicant in kernel-space: https://wiki.ubuntu.com/WifiDocs/RalinkRT2500?action=show&redirect=Rt2500WirelessCardsHowTo We have several options from here: 1.) Fix network-manager to use the rt2500 supplicant 2.) fix rt2500 to implement WE19 fully so wpasupplicant can be used with 'wext' driver backend. 3.) implement support for private rt2500 ioctls in both rt2500 and wpasupplicant Option 3 is very likely to be rejected by wpasupplicant upstream, and I assume by rt2500 upstream as well, we shouldn't go that way. I don't know how much work option 1 would be, and I consider Option 2 as the only feasible long term option. -- wpasupplicant doesn't work properly with rt2500 driver https://launchpad.net/bugs/37120 From siretart at tauware.de Fri Apr 28 13:13:34 2006 From: siretart at tauware.de (Reinhard Tartler) Date: Fri, 28 Apr 2006 13:13:34 -0000 Subject: [Bug 37120] Re: wpasupplicant doesn't work properly with rt2500 driver References: <20060329054652.7313.48354.malonedeb@gangotri.ubuntu.com> Message-ID: <20060428131334.30606.15117.malone@gangotri.ubuntu.com> Reassigning back to linux-source-2.6.15. In order for rt2500 to work with wpasupplicant, it needs to implement WE19. Currently, it seems to implement its own supplicant in kernel space: see https://wiki.ubuntu.com/Rt2500WirelessCardsHowTo/ ** Changed in: wpasupplicant (Ubuntu) Sourcepackagename: wpasupplicant => linux-source-2.6.15 -- wpasupplicant doesn't work properly with rt2500 driver https://launchpad.net/bugs/37120 From breuer at iam.uni-bonn.de Fri Apr 28 13:27:16 2006 From: breuer at iam.uni-bonn.de (Tim Breuer) Date: Fri, 28 Apr 2006 13:27:16 -0000 Subject: [Bug 41061] Re: Boot failure on SCSI disk References: <20060424090127.17643.31977.malonedeb@gandwana.ubuntu.com> Message-ID: <20060428132716.30638.9419.malone@gangotri.ubuntu.com> Same "Unknown symbol" while trying to install on a scsi harddisk. Problem is 2.6.15-20 has been removed some days ago. Can you add them again? -- Boot failure on SCSI disk https://launchpad.net/bugs/41061 From emanuele.gissi at poste.it Fri Apr 28 14:12:14 2006 From: emanuele.gissi at poste.it (Emanuele Gissi) Date: Fri, 28 Apr 2006 14:12:14 -0000 Subject: [Bug 33230] Re: sky2 hangs on large data transfers (upstream fix available) References: <20060301081029.22115.81038.malonedeb@gandwana.ubuntu.com> Message-ID: <20060428141214.29040.14520.malone@gandwana.ubuntu.com> I tried dapper beta1 and beta2. While installing, the dhcp server of my LAN is not discovered. If I manually set the network the sky2 module hangs my notebook (Toshiba Tecra A5, with Marvell Tecnology Group Ltd 88E8053 Gigabit Ethernet Controller (rev15), device ff00). -- sky2 hangs on large data transfers (upstream fix available) https://launchpad.net/bugs/33230 From andrew+ubuntu at jorgensenfamily.us Fri Apr 28 14:38:55 2006 From: andrew+ubuntu at jorgensenfamily.us (Andrew Jorgensen) Date: Fri, 28 Apr 2006 14:38:55 -0000 Subject: [Bug 37120] Re: wpasupplicant doesn't work properly with rt2500 driver References: <20060329054652.7313.48354.malonedeb@gangotri.ubuntu.com> Message-ID: <20060428143855.30606.55163.malone@gangotri.ubuntu.com> > what version of wpa_supplicant? 0.6.2-0ubuntu3, but unfortunately for me Scott just reverted the change that fixed it for me. 0.6.2-0ubuntu4 will not work. I was testing it against an unencrypted network. -- wpasupplicant doesn't work properly with rt2500 driver https://launchpad.net/bugs/37120 From andrew+ubuntu at jorgensenfamily.us Fri Apr 28 14:41:26 2006 From: andrew+ubuntu at jorgensenfamily.us (Andrew Jorgensen) Date: Fri, 28 Apr 2006 14:41:26 -0000 Subject: [Bug 37120] Re: wpasupplicant doesn't work properly with rt2500 driver References: <20060329054652.7313.48354.malonedeb@gangotri.ubuntu.com> Message-ID: <20060428144126.30606.30243.malone@gangotri.ubuntu.com> > 2.) fix rt2500 to implement WE19 fully so wpasupplicant can be used with 'wext' driver backend. This is sure to be the correct approach but you will get no help from upstream (though I imagine they'll accept the patches) because they are working on a complete rewrite of the driver (which looks to not be done for a good long time). -- wpasupplicant doesn't work properly with rt2500 driver https://launchpad.net/bugs/37120 From humufr at yahoo.fr Fri Apr 28 15:29:37 2006 From: humufr at yahoo.fr (Nicolas Gruel) Date: Fri, 28 Apr 2006 15:29:37 -0000 Subject: [Bug 41917] kernel panic whith mplayer and the Option VideoOverlay is on in xorg.conf References: <20060428152937.28955.66281.malonedeb@gandwana.ubuntu.com> Message-ID: <20060428152937.28955.66281.malonedeb@gandwana.ubuntu.com> Public bug reported: Affects: linux-meta linux-restricted-modules-2.6-686 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: When I'm trying to read a video with mplayer or xine or vlc, I have always a kernel panic when the option VideOverlay is on in xorg.conf. I'm using the last package of dapper: kernel 2.6.15-21-686 and the restricted package associate. My pc is a Thinkpad z60m Thanks for your work. -- kernel panic whith mplayer and the Option VideoOverlay is on in xorg.conf https://launchpad.net/bugs/41917 From ben.collins at ubuntu.com Fri Apr 28 16:10:45 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Fri, 28 Apr 2006 16:10:45 -0000 Subject: [Bug 35319] Re: no Fn at all Vaio SZ1XP Dapper References: <20060317124552.11105.6446.malonedeb@gandwana.ubuntu.com> Message-ID: <20060428161045.29040.98140.launchpad@gandwana.ubuntu.com> ** Changed in: linux-source-2.6.15 (Ubuntu) Status: In Progress => Fix Committed -- no Fn at all Vaio SZ1XP Dapper https://launchpad.net/bugs/35319 From ben.collins at ubuntu.com Fri Apr 28 16:13:03 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Fri, 28 Apr 2006 16:13:03 -0000 Subject: [Bug 29586] Re: Solid hangs in VIA glx code References: <20060124183403.16602.41919.malonedeb@gandwana.ubuntu.com> Message-ID: <20060428161303.29040.14914.launchpad@gandwana.ubuntu.com> ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Confirmed => Fix Committed -- Solid hangs in VIA glx code https://launchpad.net/bugs/29586 From jgotangco at ubuntu.com Fri Apr 28 16:46:30 2006 From: jgotangco at ubuntu.com (Jerome S. Gotangco) Date: Fri, 28 Apr 2006 16:46:30 -0000 Subject: [Bug 29299] Re: Laptop Mission: Tecra M2 does not reboot in Dapper References: <20060121163034.28441.92217.malonedeb@gangotri.ubuntu.com> Message-ID: <20060428164630.30606.32908.malone@gangotri.ubuntu.com> Chuck, no go. Still had to do modprobe -r just to make this work. Barry, even with Beta, it still persists. I got to talk to Matthew (Garrett) about this, he said he hasn't looked on it yet but aware of the regression. -- Laptop Mission: Tecra M2 does not reboot in Dapper https://launchpad.net/bugs/29299 From manuel.teira at telefonica.net Fri Apr 28 16:54:02 2006 From: manuel.teira at telefonica.net (Manuel Teira) Date: Fri, 28 Apr 2006 16:54:02 -0000 Subject: [Bug 41570] Re: ipw2200 card is not working References: <20060426125847.28941.58505.malonedeb@gangotri.ubuntu.com> Message-ID: <20060428165402.30606.53667.launchpad@gangotri.ubuntu.com> ** Description changed: - On my Toshiba Satellite L20, centrino based laptop, wireless card is not - longer working since updated to dapper (it worked under breezy). I'm - using wep in my AP with 64 bits key length. It seems its not able to - associate with the AP. + On my Toshiba Satellite L20, centrino based laptop, wireless card is not longer working since updated to dapper (it worked under breezy). I'm using wep in my AP with 64 bits key length. + It seems it is not able to associate with the AP, as kismet is able to get packets from the card and iwlist eth0 scan is able to locate my access-point. Significant syslog messages are: [4294685.008000] ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection [4294685.010000] 8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004) [4294685.190000] ACPI: PCI Interrupt 0000:00:1e.2[A] -> GSI 17 (level, low) -> IRQ 169 [4294685.190000] PCI: Setting latency timer of device 0000:00:1e.2 to 64 [4294685.222000] ipw2200: Detected geography ZZM (11 802.11bg channels, 0 802.11a channels) ... [4294685.620000] ieee80211_crypt: registered algorithm 'WEP' ... [4294686.735000] eth1: NETDEV_TX_BUSY returned; driver should report queue full via ieee_device->is_queue_full. iwconfig returns: eth1 unassociated ESSID:"VIGO" Mode:Managed Channel=0 Access Point: Not-Associated Bit Rate=0 kb/s Tx-Power=20 dBm Sensitivity=8/0 Retry limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality:0 Signal level:0 Noise level:0 Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 and ifconfig eth1: eth1 Link encap:Ethernet HWaddr 00:13:CE:3D:CF:77 inet addr:172.26.0.3 Bcast:172.26.0.255 Mask:255.255.255.0 inet6 addr: fe80::213:ceff:fe3d:cf77/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1976 errors:0 dropped:0 overruns:0 frame:0 TX packets:2372 errors:0 dropped:0 overruns:0 carrier:1 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) Interrupt:169 Base address:0x8000 Memory:b0102000-b0102fff iwlist eth1 scan: mteira at piton:~$ iwlist eth1 scan eth1 Scan completed : Cell 01 - Address: 00:16:38:89:39:91 ESSID:"VIGO" Protocol:IEEE 802.11bg Mode:Master Channel:12 Encryption key:on Bit Rates:54 Mb/s Extra: Rates (Mb/s): 1 2 5.5 6 9 11 12 18 24 36 48 54 Quality=86/100 Signal level=-44 dBm Extra: Last beacon: 712ms ago Cell 02 - Address: 00:16:38:89:39:91 ESSID:"" Protocol:IEEE 802.11bg Mode:Master Channel:12 Encryption key:on Bit Rates:54 Mb/s Extra: Rates (Mb/s): 1 2 5.5 6 9 11 12 18 24 36 48 54 Quality=95/100 Signal level=-31 dBm Extra: Last beacon: 241ms ago -- ipw2200 card is not working https://launchpad.net/bugs/41570 From angystardust at gmail.com Fri Apr 28 16:52:52 2006 From: angystardust at gmail.com (Angelo Lisco) Date: Fri, 28 Apr 2006 16:52:52 -0000 Subject: [Bug 35455] Re: After hibernate, cooling on nc6220 does not restart References: <20060318120346.12254.9646.malonedeb@gandwana.ubuntu.com> Message-ID: <20060428165254.30606.86044.malone@gangotri.ubuntu.com> An interesting quote from Ben Collins's git tree... wait for the next kernel package to be uploaded... >[UBUNTU:acpi] Threaded ACPI support > >Some machines (such as the nx6125) assume that multiple acpi methods can >be executed in parallel. This patch adds support for this, which >prevents situations where the fan fails to turn on and the machine >melts. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Needs Info => In Progress -- After hibernate, cooling on nc6220 does not restart https://launchpad.net/bugs/35455 From mdz at ubuntu.com Fri Apr 28 16:57:23 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Fri, 28 Apr 2006 16:57:23 -0000 Subject: [Bug 29767] Re: IBM Thinkpad X41 suspend to disk unsatisfactory regression References: <20060126124346.26274.53643.malonedeb@gangotri.ubuntu.com> Message-ID: <20060428165723.28955.52456.malone@gandwana.ubuntu.com> The original problem reported in this bug is no longer present, and a secondary problem (missing swap partition) was corrected during an IRC debugging session. All is well. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Confirmed => Fix Released -- IBM Thinkpad X41 suspend to disk unsatisfactory regression https://launchpad.net/bugs/29767 From lietuvis at gmail.com Fri Apr 28 17:02:50 2006 From: lietuvis at gmail.com (mula) Date: Fri, 28 Apr 2006 17:02:50 -0000 Subject: [Bug 41612] Re: Gdm can't wake up after suspension References: <20060426163245.28941.81217.malonedeb@gangotri.ubuntu.com> Message-ID: <20060428170250.29040.77663.malone@gandwana.ubuntu.com> Daniel, in fact, you must have been right. I had 2.6.15-20 installed but after an upgrade to 2.6.15-21 the suspension just started working. However, I should rather say "working". I can get back to X but the desktop itself then becomes useless. Whenever I try to select something with a mouse or to scroll, everything gets messy as a part of one text overlays a part of another and so on. I am not sure of how can I backtrace why it is so. -- Gdm can't wake up after suspension https://launchpad.net/bugs/41612 From jhkukkon at cc.hut.fi Fri Apr 28 17:47:03 2006 From: jhkukkon at cc.hut.fi (Jussi Kukkonen) Date: Fri, 28 Apr 2006 17:47:03 -0000 Subject: [Bug 41306] bug is INVALID References: <20060425141240.28914.62780.malonedeb@gangotri.ubuntu.com> Message-ID: <20060428174703.30606.44230.malone@gangotri.ubuntu.com> The problem turned out to be a result of a faulty cable -- so _not_ a bug in Ubuntu. Please mark this report INVALID (or whatever is the equivalent in launchpad). Sorry for the trouble, and a big thanks for a great OS. -- Xircom pcmcia ethernet adapter stopped working in Dapper https://launchpad.net/bugs/41306 From ubuntu-de at e-monkey.ch Fri Apr 28 17:54:15 2006 From: ubuntu-de at e-monkey.ch (emonkey) Date: Fri, 28 Apr 2006 17:54:15 -0000 Subject: [Bug 33368] Re: X freeze the computer (Dapper - glcore) References: <20060302082234.17525.50004.malonedeb@gangotri.ubuntu.com> Message-ID: <20060428175415.30638.49581.malone@gangotri.ubuntu.com> I've downloaded the Live CD instead the install CD. But this "mistake" showe me some interessant fact. The first Kubuntu 6.06 Beta freezed shortly after X has started, too. So I've tryed to start with the "save graphic mode" boot option and that works! Unfortunately this freeze with the "normal" boot option I've no logs 'cause it's a live CD... I'm going this weekend to the mountains so I can try it with the install CD and the Beta 2 soonest on Monday the 1st of May. I really hope someone can fix this problem before the 1st of June. I'll do my best to give you all the information which are useful to solve this problem. Thank you anyway for your commitment. -- X freeze the computer (Dapper - glcore) https://launchpad.net/bugs/33368 From zulcss at gmail.com Fri Apr 28 17:56:28 2006 From: zulcss at gmail.com (ChuckShort) Date: Fri, 28 Apr 2006 17:56:28 -0000 Subject: [Bug 41306] Re: Xircom pcmcia ethernet adapter stopped working in Dapper References: <20060425141240.28914.62780.malonedeb@gangotri.ubuntu.com> Message-ID: <20060428175628.30638.84632.malone@gangotri.ubuntu.com> Faulty cable ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Unconfirmed => Rejected -- Xircom pcmcia ethernet adapter stopped working in Dapper https://launchpad.net/bugs/41306 From igor4u at gmail.com Fri Apr 28 18:00:27 2006 From: igor4u at gmail.com (Igor Zubarev) Date: Fri, 28 Apr 2006 18:00:27 -0000 Subject: [Bug 31293] Re: My laptop doesn't resume from S3 ACPI sleep state. References: <20060213101035.1233.41596.malonedeb@gandwana.ubuntu.com> Message-ID: <20060428180027.28955.14551.malone@gandwana.ubuntu.com> My Sony VAIO VGN-FS115 doesn't resume from sleep too. Driver "nv". Also during hibernate I hear cracking sound from speakers. -- My laptop doesn't resume from S3 ACPI sleep state. https://launchpad.net/bugs/31293 From igor4u at gmail.com Fri Apr 28 18:17:15 2006 From: igor4u at gmail.com (Igor Zubarev) Date: Fri, 28 Apr 2006 18:17:15 -0000 Subject: [Bug 35319] Re: no Fn at all Vaio SZ1XP Dapper References: <20060317124552.11105.6446.malonedeb@gandwana.ubuntu.com> Message-ID: <20060428181715.30606.71565.malone@gangotri.ubuntu.com> Not working Fn keys on Sony VAIO VGN-FS115MR too. Kernel 2.6.15-21-386. -- no Fn at all Vaio SZ1XP Dapper https://launchpad.net/bugs/35319 From igor4u at gmail.com Fri Apr 28 18:24:15 2006 From: igor4u at gmail.com (Igor Zubarev) Date: Fri, 28 Apr 2006 18:24:15 -0000 Subject: [Bug 39362] Re: SD reader/writer on Sony Vaio TX1XP does not work References: <20060413002109.31677.4898.malonedeb@gandwana.ubuntu.com> Message-ID: <20060428182415.30606.62411.malone@gangotri.ubuntu.com> The same for Memory Stick reader in Sony VAIO VGN-FS115MR. It doesn't work. -- SD reader/writer on Sony Vaio TX1XP does not work https://launchpad.net/bugs/39362 From lure.net at gmail.com Fri Apr 28 19:17:34 2006 From: lure.net at gmail.com (Luka Renko) Date: Fri, 28 Apr 2006 19:17:34 -0000 Subject: [Bug 41306] Re: Xircom pcmcia ethernet adapter stopped working in Dapper References: <20060425141240.28914.62780.malonedeb@gangotri.ubuntu.com> Message-ID: <20060428191734.29040.33533.launchpad@gandwana.ubuntu.com> ** Changed in: pcmciautils (Ubuntu) Status: Unconfirmed => Rejected -- Xircom pcmcia ethernet adapter stopped working in Dapper https://launchpad.net/bugs/41306 From ubuntu-de at e-monkey.ch Fri Apr 28 19:16:33 2006 From: ubuntu-de at e-monkey.ch (emonkey) Date: Fri, 28 Apr 2006 19:16:33 -0000 Subject: [Bug 33368] Re: X freeze the computer (Dapper - glcore) References: <20060302082234.17525.50004.malonedeb@gangotri.ubuntu.com> Message-ID: <20060428191633.30606.26427.launchpad@gangotri.ubuntu.com> ** Attachment added: "x.org from the Live CD (K Beta 1) "save graphic mode"" http://librarian.launchpad.net/2402690/xorg.conf -- X freeze the computer (Dapper - glcore) https://launchpad.net/bugs/33368 From petrme at gmail.com Fri Apr 28 19:45:38 2006 From: petrme at gmail.com (petrme) Date: Fri, 28 Apr 2006 19:45:38 -0000 Subject: [Bug 41959] Card reader on Acer TM 3010 doesn't work References: <20060428194538.28955.78281.malonedeb@gandwana.ubuntu.com> Message-ID: <20060428194538.28955.78281.malonedeb@gandwana.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: Acer TM 3012WTMi has a build-in 5-in-1 card reader. When I put an SD card into the slot no device icon appears on the desktop. lspci: 0000:0a:09.0 CardBus bridge: Texas Instruments: Unknown device 8039 0000:0a:09.2 Mass storage controller: Texas Instruments: Unknown device 803b ** Attachment added: "Card reader on Acer TM 3010 doesn't work" http://librarian.launchpad.net/2402706/dmesg.txt -- Card reader on Acer TM 3010 doesn't work https://launchpad.net/bugs/41959 From mdz at ubuntu.com Fri Apr 28 19:52:34 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Fri, 28 Apr 2006 19:52:34 -0000 Subject: [Bug 41061] Re: Boot failure on SCSI disk References: <20060424090127.17643.31977.malonedeb@gandwana.ubuntu.com> Message-ID: <20060428195234.29040.21757.launchpad@gandwana.ubuntu.com> ** Changed in: linux-source-2.6.15 linux-image-2.6.15-21-k7 (Ubuntu) Severity: Critical => Major Status: Confirmed => Unconfirmed ** Summary changed: - Boot failure on SCSI disk + aic7xxx fails to load ** Changed in: linux-source-2.6.15 linux-image-2.6.15-21-k7 (Ubuntu) Target: None => ubuntu-6.06 -- aic7xxx fails to load https://launchpad.net/bugs/41061 From launchpad at taggedtype.net Fri Apr 28 19:52:08 2006 From: launchpad at taggedtype.net (sohail) Date: Fri, 28 Apr 2006 19:52:08 -0000 Subject: [Bug 30557] Re: cpu idle time in /proc/stat wrong References: <20060205141542.11709.55517.malonedeb@gandwana.ubuntu.com> Message-ID: <20060428195208.28955.81428.malone@gandwana.ubuntu.com> The workaround is good for me (Pentium M 2.13 GHz) but I'd like a fix :) -- cpu idle time in /proc/stat wrong https://launchpad.net/bugs/30557 From mdz at ubuntu.com Fri Apr 28 20:14:27 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Fri, 28 Apr 2006 20:14:27 -0000 Subject: [Bug 35455] Re: After hibernate, cooling on nc6220 does not restart References: <20060318120346.12254.9646.malonedeb@gandwana.ubuntu.com> Message-ID: <20060428201427.30606.86494.launchpad@gangotri.ubuntu.com> ** Changed in: linux-source-2.6.15 (Ubuntu) Target: None => ubuntu-6.06 -- After hibernate, cooling on nc6220 does not restart https://launchpad.net/bugs/35455 From mdz at ubuntu.com Fri Apr 28 20:17:17 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Fri, 28 Apr 2006 20:17:17 -0000 Subject: [Bug 41061] Re: aic7xxx fails to load References: <20060424090127.17643.31977.malonedeb@gandwana.ubuntu.com> Message-ID: <20060428201718.30606.19819.launchpad@gangotri.ubuntu.com> ** Changed in: linux-source-2.6.15 linux-image-2.6.15-21-k7 (Ubuntu) Status: Unconfirmed => Confirmed -- aic7xxx fails to load https://launchpad.net/bugs/41061 From mdz at ubuntu.com Fri Apr 28 20:15:40 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Fri, 28 Apr 2006 20:15:40 -0000 Subject: [Bug 21574] Re: sound gone after resuming from sleep on hp nx8220 References: <20060113141334.21012.43238.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060428201540.28955.33048.malone@gandwana.ubuntu.com> Rejecting unnecessary acpi-support task; bug remains open on linux- source-2.6.15 ** Changed in: acpi-support (Ubuntu) Status: Unconfirmed => Rejected -- sound gone after resuming from sleep on hp nx8220 https://launchpad.net/bugs/21574 From arturober at hotmail.com Fri Apr 28 20:27:09 2006 From: arturober at hotmail.com (Sikiatriko) Date: Fri, 28 Apr 2006 20:27:09 -0000 Subject: [Bug 34209] Re: 2.6.15-17-k7 doesn't boot on Athlon 2000+ References: <20060309134308.29403.37559.malonedeb@gangotri.ubuntu.com> Message-ID: <20060428202709.30606.13495.malone@gangotri.ubuntu.com> Same happens here. Athlon 850 thunderbird. Breezy works perferct, but not Dapper. I've tried LiveCD, installCD, installing Breezy and updating and nothing works. It stops at the boot start. When I choose to install a server it gives me this message: ide: failed opcode was unknown This happens after detecting my IDE units. SUSE 10.1 RC3 also stops at booting the install CD but i don't know why and Fedora core 5 thich also has a new kernel (I think also 2.6.15) freezes when starting to install. Maybe is a kernel problem after all, not Ubuntu's. -- 2.6.15-17-k7 doesn't boot on Athlon 2000+ https://launchpad.net/bugs/34209 From dude2425+lpad at gmail.com Fri Apr 28 20:29:53 2006 From: dude2425+lpad at gmail.com (Cody Hardman) Date: Fri, 28 Apr 2006 20:29:53 -0000 Subject: [Bug 26893] Re: 2.6.15 kernel locks hard when downloading References: <20060113145150.21012.17412.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060428202954.30638.72025.malone@gangotri.ubuntu.com> It seems to be working just fine now, although I'm not sure which upgrade got it working, I've booted using nosmp once and didn't reboot again for a long while. -- 2.6.15 kernel locks hard when downloading https://launchpad.net/bugs/26893 From arturober at hotmail.com Fri Apr 28 20:52:30 2006 From: arturober at hotmail.com (Sikiatriko) Date: Fri, 28 Apr 2006 20:52:30 -0000 Subject: [Bug 40291] Re: Complete machine freeze References: <20060420084019.21557.8908.malonedeb@gangotri.ubuntu.com> Message-ID: <20060428205230.29040.89141.malone@gandwana.ubuntu.com> Same here, with dapper Flight 6, Beta 1, Beta 2 (LiveCDs and Install CDs). I think it may be the kernel(2.6.15) because Suse 10.1RC3 also freezes when booting the install CD. -- Complete machine freeze https://launchpad.net/bugs/40291 From mail at carthik.net Fri Apr 28 20:58:58 2006 From: mail at carthik.net (Carthik Sharma) Date: Fri, 28 Apr 2006 20:58:58 -0000 Subject: [Bug 26893] Re: 2.6.15 kernel locks hard when downloading References: <20060113145150.21012.17412.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060428205859.29040.88018.malone@gandwana.ubuntu.com> Reporter says that recent release does not have this problem. Closing. Thanks for reporting this bug. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Needs Info => Fix Released -- 2.6.15 kernel locks hard when downloading https://launchpad.net/bugs/26893 From sascha-ubuntu-launchpad at silbe.org Fri Apr 28 21:02:49 2006 From: sascha-ubuntu-launchpad at silbe.org (Sascha Silbe) Date: Fri, 28 Apr 2006 21:02:49 -0000 Subject: [Bug 40071] Re: linux-image-* will happily install even if /boot fills up in the process References: <20060418220553.8468.65002.malonedeb@gandwana.ubuntu.com> Message-ID: <20060428210249.30638.81430.malone@gangotri.ubuntu.com> This is probably a dupe of bug #31126. -- linux-image-* will happily install even if /boot fills up in the process https://launchpad.net/bugs/40071 From arturober at hotmail.com Fri Apr 28 22:24:23 2006 From: arturober at hotmail.com (Sikiatriko) Date: Fri, 28 Apr 2006 22:24:23 -0000 Subject: [Bug 34209] Re: 2.6.15-17-k7 doesn't boot on Athlon 2000+ References: <20060309134308.29403.37559.malonedeb@gangotri.ubuntu.com> Message-ID: <20060428222423.28955.45647.malone@gandwana.ubuntu.com> I should mention that before the error mentioned above the kernel shows 4 messages about a bad crc in one of my hard disks. I've put that hard disk in the same ide channel as the CD-ROM drive, and the kernel continues giving me same messages, but this time it boots succesfully (well, I think with DMA disabled in that hard disk). With 2.6.9, 2.6.10 and 2.6.12 that didn't happen, I got no error messages, very weird. -- 2.6.15-17-k7 doesn't boot on Athlon 2000+ https://launchpad.net/bugs/34209 From nick at mcgill.org.uk Fri Apr 28 22:40:21 2006 From: nick at mcgill.org.uk (Nick McGill) Date: Fri, 28 Apr 2006 22:40:21 -0000 Subject: [Bug 40708] rt2570 wireless network problems References: <20060422070405.30538.49283.malonedeb@gangotri.ubuntu.com> Message-ID: <20060428224021.30638.61276.launchpad@canonical@gangotri.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: using 2.6.15-20-386, in a mixed network environment (M$ & Ubuntu) with samba, winbind etc. Several problems show up: winbind will crash the network connection, bringing down firefox if it's running. ping a machine on the local network by name, and a 'segmentation fault' occurs. This can be prevented by placing entries for local machines in the hosts file, although system is still unstable (as below). deactivating rausb0, then reactivating it will cause the computer to lock up - hard reset required As far as I'm aware, I'm fully up to date with the updates. One thing which may cast some light is teh report in dmesg: [4294742.493000] rausb0 (WE) : Driver using old /proc/net/wireless support, please fix driver ! If anyone can tell me how to fix this (as a starting point) I would much appreciate it. Thanks Nick -- rt2570 wireless network problems https://launchpad.net/bugs/40708 From samtygier at yahoo.co.uk Fri Apr 28 22:40:20 2006 From: samtygier at yahoo.co.uk (sam tygier) Date: Fri, 28 Apr 2006 22:40:20 -0000 Subject: [Bug 40708] Re: rt2570 wireless network problems References: <20060422070405.30538.49283.malonedeb@gangotri.ubuntu.com> Message-ID: <20060428224021.30638.19996.launchpad@gangotri.ubuntu.com> ** Changed in: Ubuntu Sourcepackagename: None => linux-source-2.6.15 -- rt2570 wireless network problems https://launchpad.net/bugs/40708 From pedromj at gmail.com Sat Apr 29 00:24:30 2006 From: pedromj at gmail.com (pedromj) Date: Sat, 29 Apr 2006 00:24:30 -0000 Subject: [Bug 31293] Re: [Bug 31293] Re: My laptop doesn't resume from S3 ACPI sleep state. References: <20060213101035.1233.41596.malonedeb@gandwana.ubuntu.com> <20060428180027.28955.14551.malone@gandwana.ubuntu.com> Message-ID: <1146270270.4315.0.camel@localhost> I'm using NVidia driver. Try it and see if it works, please. Regards, Pedro El vie, 28-04-2006 a las 18:00 +0000, Igor Zubarev escribió: > My Sony VAIO VGN-FS115 doesn't resume from sleep too. > Driver "nv". Also during hibernate I hear cracking sound from speakers. > -- Pedro Martínez Juliá \ pedromj at gmail.com )| WebLog: http://www.pedromj.com/blog / Página web: http://www.pedromj.com GoogleTalk: pedromj at gmail.com Socio HispaLinux #311 Usuario Linux #275438 - http://counter.li.org -- My laptop doesn't resume from S3 ACPI sleep state. https://launchpad.net/bugs/31293 From ubuntu-bugs at nullinfinity.org Sat Apr 29 00:54:39 2006 From: ubuntu-bugs at nullinfinity.org (Johan Brannlund) Date: Sat, 29 Apr 2006 00:54:39 -0000 Subject: [Bug 36944] Re: software_resume()->read_suspend_image() can fail at get_zeroed_page() References: <20060328014552.6253.26373.malonedeb@gandwana.ubuntu.com> Message-ID: <20060429005439.28955.8554.malone@gandwana.ubuntu.com> This is probably too late for Dapper, but please, is there any way the Ubuntu kernels can switch to using suspend2 in the future? Recently I haven't had the time to build my own kernels, but back when I did, suspend2 was rock solid. Never a single failure to either suspend or resume. Also, the system comes back in an immediately usable state, unlike swsusp which brings on a big swap storm when it resumes. Or maybe I should say that it did so last time it worked. -- software_resume()->read_suspend_image() can fail at get_zeroed_page() https://launchpad.net/bugs/36944 From ubuntu-bugs at nullinfinity.org Sat Apr 29 01:00:34 2006 From: ubuntu-bugs at nullinfinity.org (Johan Brannlund) Date: Sat, 29 Apr 2006 01:00:34 -0000 Subject: [Bug 41959] Re: Card reader on Acer TM 3010 doesn't work References: <20060428194538.28955.78281.malonedeb@gandwana.ubuntu.com> Message-ID: <20060429010034.30606.68280.malone@gangotri.ubuntu.com> Does "lspci -n |grep 0805" print anything? If not, I don't believe there is a linux driver for this card reader. -- Card reader on Acer TM 3010 doesn't work https://launchpad.net/bugs/41959 From nkbj at mail.tele.dk Sat Apr 29 03:08:16 2006 From: nkbj at mail.tele.dk (Niels Kristian Bech Jensen) Date: Sat, 29 Apr 2006 03:08:16 -0000 Subject: [Bug 30273] Re: linux-image-2.6.15-14-powerpc does not boot on beige Powermac G3 either. References: <20060201225707.3906.28595.malonedeb@gangotri.ubuntu.com> Message-ID: <20060429030816.30638.81639.malone@gangotri.ubuntu.com> I can confirm this bug. I see the same behaviour on my beige Powermac G3 (another oldworld system) with the Dapper beta CD. Please consider this release critical. Regards, Niels Kristian -- linux-image-2.6.15-14-powerpc does not boot on "50 (PowerBook Wallstreet)" https://launchpad.net/bugs/30273 From davidger at racsa.co.cr Sat Apr 29 03:28:26 2006 From: davidger at racsa.co.cr (David Corrales) Date: Sat, 29 Apr 2006 03:28:26 -0000 Subject: [Bug 41373] Re: High basal cpu load on 686 but not 386 kernel References: <20060425203132.28879.58237.malonedeb@gandwana.ubuntu.com> Message-ID: <20060429032826.28955.23545.malone@gandwana.ubuntu.com> I'm also running Ubuntu Dapper on an Inspiron 9300 and the 686 is giving me high cpu utilization. The temporary fix is to use the 386 one. -- High basal cpu load on 686 but not 386 kernel https://launchpad.net/bugs/41373 From igor4u at gmail.com Sat Apr 29 05:15:57 2006 From: igor4u at gmail.com (Igor Zubarev) Date: Sat, 29 Apr 2006 05:15:57 -0000 Subject: [Bug 31293] Re: My laptop doesn't resume from S3 ACPI sleep state. References: <20060213101035.1233.41596.malonedeb@gandwana.ubuntu.com> Message-ID: <20060429051557.30638.85148.malone@gangotri.ubuntu.com> I tryed NVIDIA driver. Suspend is OK, Hibernate works with cracking sound from speakers. But this sound is more silent, than using NV driver. Although in Windows hibernate goes without any sound from speakers. -- My laptop doesn't resume from S3 ACPI sleep state. https://launchpad.net/bugs/31293 From philbull at gmail.com Sat Apr 29 07:08:43 2006 From: philbull at gmail.com (Phil Bull) Date: Sat, 29 Apr 2006 07:08:43 -0000 Subject: [Bug 30273] Re: linux-image-2.6.15-14-powerpc does not boot on "50 (PowerBook Wallstreet)" References: <20060201225707.3906.28595.malonedeb@gangotri.ubuntu.com> Message-ID: <20060429070843.30638.91537.malone@gangotri.ubuntu.com> Setting status to confirmed. ** Changed in: linux-source-2.6.15 (Ubuntu) Severity: Normal => Major Status: Needs Info => Confirmed -- linux-image-2.6.15-14-powerpc does not boot on "50 (PowerBook Wallstreet)" https://launchpad.net/bugs/30273 From rob.mcmeekin at gmail.com Sat Apr 29 08:00:12 2006 From: rob.mcmeekin at gmail.com (Robert McMeekin) Date: Sat, 29 Apr 2006 08:00:12 -0000 Subject: [Bug 41990] obscure alsa ThinkPad 600 input/output error References: <20060429021220.30638.6461.malonedeb@gangotri.ubuntu.com> Message-ID: <20060429080012.29040.24042.launchpad@canonical@gandwana.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: robert at elephant:~$ aplay /usr/share/sounds/startup.wav Playing WAVE '/usr/share/sounds/startup.wav' : Signed 16 bit Little Endian, Rate 44100 Hz, Stereo aplay: pcm_write:1222: write error: Input/output error That above is why I am filing this bug report. I cannot play any sounds or record sounds, though I can use alsamixer to make it so that I can hear myself talking into the microphone and cause a lot of feedback. robert at elephant:~$ uname -a Linux elephant 2.6.15-21-686 #1 SMP PREEMPT Fri Apr 21 16:57:03 UTC 2006 i686 GNU/Linux Before I upgraded to dapper I was using the OSS cs4232 module because I did not want to read about how to configure alsa. That driver is no longer available though it seems so I am using snd-cs4236 by adding the following to rc.local (probably not the right way, but it seems to load without errors, which should be a bug because it doesn't work): ## setup the sound card setpnp 0e on && setpnp 0f on && setpnp 10 off || exit 1 OPTIONS="index=0 isapnp=0 port=0x530 cport=0x538 irq=5 dma1=1 dma2=0" modprobe snd-cs4236 $OPTIONS || exit 1 AFAIK my system is as updated as possible as of this time of this writing. -- obscure alsa ThinkPad 600 input/output error https://launchpad.net/bugs/41990 From samtygier at yahoo.co.uk Sat Apr 29 08:00:12 2006 From: samtygier at yahoo.co.uk (sam tygier) Date: Sat, 29 Apr 2006 08:00:12 -0000 Subject: [Bug 41990] Re: obscure alsa ThinkPad 600 input/output error References: <20060429021220.30638.6461.malonedeb@gangotri.ubuntu.com> Message-ID: <20060429080012.29040.28736.launchpad@gandwana.ubuntu.com> ** Changed in: Ubuntu Sourcepackagename: None => linux-source-2.6.15 -- obscure alsa ThinkPad 600 input/output error https://launchpad.net/bugs/41990 From callipeo at libero.it Sat Apr 29 08:10:04 2006 From: callipeo at libero.it (=?utf-8?q?Francesco_Accattap=C3=A0?=) Date: Sat, 29 Apr 2006 08:10:04 -0000 Subject: [Bug 41963] Audio problem on iBook G4 References: <20060428202440.28955.79886.malonedeb@gandwana.ubuntu.com> Message-ID: <20060429081004.29040.9673.launchpad@canonical@gandwana.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: The sound is interrupted every 0.2-0.3 second by a short pause on my system, leading to a very low-quality playing. I get this behavior with ogg files as well as wave files. Kernel version: 2.6.15-20.30 gstreamer0.10-alsa version: 0.10.5-0ubuntu3 -- Audio problem on iBook G4 https://launchpad.net/bugs/41963 From samtygier at yahoo.co.uk Sat Apr 29 08:10:04 2006 From: samtygier at yahoo.co.uk (sam tygier) Date: Sat, 29 Apr 2006 08:10:04 -0000 Subject: [Bug 41963] Re: Audio problem on iBook G4 References: <20060428202440.28955.79886.malonedeb@gandwana.ubuntu.com> Message-ID: <20060429081004.29040.78026.launchpad@gandwana.ubuntu.com> ** Changed in: Ubuntu Sourcepackagename: None => linux-source-2.6.15 -- Audio problem on iBook G4 https://launchpad.net/bugs/41963 From martin at hyperion.ath.cx Sat Apr 29 08:18:13 2006 From: martin at hyperion.ath.cx (martinp) Date: Sat, 29 Apr 2006 08:18:13 -0000 Subject: [Bug 42012] Kernel panic using fglrx drivers References: <20060429081813.29040.23887.malonedeb@gandwana.ubuntu.com> Message-ID: <20060429081813.29040.23887.malonedeb@gandwana.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 linux-image-2.6.15-21-686 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: The most likely source is the broken hibernate function. Whenever I try to hibernate with fglrx the freezer hangs leaving the harddisk status indicator on. So I switch my notebook off. After booting I get a kernel panic. Booting an old 2.6.15-19-686 works without any problems - no kernel panics. However this issue sometimes happens without having tried to hibernate. This is really confusing, so I will compile to kernel on my own and see what happens. I have attached a photo of my kernel panic, so you can possibly track the problem down, while I'm trying to find a solution. -- Kernel panic using fglrx drivers https://launchpad.net/bugs/42012 From asraniel at fryx.ch Sat Apr 29 08:27:32 2006 From: asraniel at fryx.ch (Asraniel) Date: Sat, 29 Apr 2006 08:27:32 -0000 Subject: [Bug 36983] Re: Acer Travelmate 8103 needs "noapic" to boot installer References: <20060328105503.6279.36895.malonedeb@gandwana.ubuntu.com> Message-ID: <20060429082732.29040.92703.malone@gandwana.ubuntu.com> seems to be fixed with current kernel. -- Acer Travelmate 8103 needs "noapic" to boot installer https://launchpad.net/bugs/36983 From htinnocent at gmail.com Sat Apr 29 08:26:03 2006 From: htinnocent at gmail.com (htinn) Date: Sat, 29 Apr 2006 08:26:03 -0000 Subject: [Bug 37370] Re: Crash/freeze when restarting networking, rt2570 wireless USB (DWL-G122, rev B1) References: <20060330180253.23733.49082.malonedeb@gandwana.ubuntu.com> Message-ID: <20060429082603.30638.24231.malone@gangotri.ubuntu.com> Well, after testing "-server" for a few days, it seems like this is a worse situation. Random cut-outs still occur and are impossible to recover from using that kernel, leaving me without even a workaround. It's starting to look like either I compile my own kernel or I start using the "experimental" driver. -- Crash/freeze when restarting networking, rt2570 wireless USB (DWL-G122, rev B1) https://launchpad.net/bugs/37370 From pedromj at gmail.com Sat Apr 29 08:29:56 2006 From: pedromj at gmail.com (pedromj) Date: Sat, 29 Apr 2006 08:29:56 -0000 Subject: [Bug 31293] Re: [Bug 31293] Re: My laptop doesn't resume from S3 ACPI sleep state. References: <20060213101035.1233.41596.malonedeb@gandwana.ubuntu.com> <20060429051557.30638.85148.malone@gangotri.ubuntu.com> Message-ID: <1146299396.4592.2.camel@localhost> You can add soundcard to the list of modules that should be removed before suspend/hibernate (and restored after resume). If you like "nv" rather than "NVidia" you can try to call video-post after resume... Regards, Pedro El sáb, 29-04-2006 a las 05:15 +0000, Igor Zubarev escribió: > I tryed NVIDIA driver. Suspend is OK, Hibernate works with cracking > sound from speakers. But this sound is more silent, than using NV > driver. Although in Windows hibernate goes without any sound from > speakers. > -- Pedro Martínez Juliá \ pedromj at gmail.com )| WebLog: http://www.pedromj.com/blog / Página web: http://www.pedromj.com GoogleTalk: pedromj at gmail.com Socio HispaLinux #311 Usuario Linux #275438 - http://counter.li.org -- My laptop doesn't resume from S3 ACPI sleep state. https://launchpad.net/bugs/31293 From martin at hyperion.ath.cx Sat Apr 29 08:28:35 2006 From: martin at hyperion.ath.cx (martinp) Date: Sat, 29 Apr 2006 08:28:35 -0000 Subject: [Bug 42012] Re: Kernel panic using fglrx drivers References: <20060429081813.29040.23887.malonedeb@gandwana.ubuntu.com> Message-ID: <20060429082835.29040.47953.launchpad@gandwana.ubuntu.com> ** Attachment added: "Kernel panic stacktrace" http://librarian.launchpad.net/2415459/DSC00221.JPG ** Changed in: linux-source-2.6.15 linux-image-2.6.15-21-686 (Ubuntu) Severity: Normal => Critical Priority: None => High -- Kernel panic using fglrx drivers https://launchpad.net/bugs/42012 From sean at dubhghaill.no-ip.org Sat Apr 29 09:46:12 2006 From: sean at dubhghaill.no-ip.org (Sean O'Dubhghaill) Date: Sat, 29 Apr 2006 09:46:12 -0000 Subject: [Bug 37795] Re: zd1211 wireless driver broken, too old (20050315) References: <20060403011323.23733.67873.malonedeb@gandwana.ubuntu.com> Message-ID: <20060429094612.30606.7075.malone@gangotri.ubuntu.com> I can confirm that the driver currently in ubuntu dapper beta 2 does not work for me. iwconfig reports it as a wired interface. -- zd1211 wireless driver broken, too old (20050315) https://launchpad.net/bugs/37795 From mascha at ma-scha.de Sat Apr 29 09:59:12 2006 From: mascha at ma-scha.de (Martin Schaaf) Date: Sat, 29 Apr 2006 09:59:12 -0000 Subject: [Bug 42023] Erros on writing and reading a dvd-ram References: <20060429095912.30638.41865.malonedeb@gangotri.ubuntu.com> Message-ID: <20060429095912.30638.41865.malonedeb@gangotri.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 linux-image-2.6.15-21-amd64-generic (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: I get the following erros on startup of my system: Apr 29 08:35:20 localhost kernel: [ 64.449268] [drm] Initialized drm 1.0.0 20040925 Apr 29 08:35:20 localhost kernel: [ 64.460250] GSI 22 sharing vector 0xD9 and IRQ 22 Apr 29 08:35:20 localhost kernel: [ 64.460336] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 217 Apr 29 08:35:20 localhost kernel: [ 64.460442] PCI: Via IRQ fixup for 0000:01:00.0, from 7 to 9 Apr 29 08:35:20 localhost kernel: [ 64.462528] [drm] Initialized via 2.6.3 20050523 on minor 0: Apr 29 08:35:20 localhost kernel: [ 64.568702] agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0. Apr 29 08:35:20 localhost kernel: [ 64.568817] agpgart: Xorg tried to set rate=x12. Setting to AGP3 x8 mode. Apr 29 08:35:20 localhost kernel: [ 64.568920] agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode Apr 29 08:35:20 localhost kernel: [ 64.569063] agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode Apr 29 08:35:20 localhost hpiod: 0.9.6 accepting connections at 46108... Apr 29 08:35:20 localhost kernel: [ 64.944906] irq 217: nobody cared (try booting with the "irqpoll" option) Apr 29 08:35:20 localhost kernel: [ 64.944914] Apr 29 08:35:20 localhost kernel: [ 64.944915] Call Trace: {__report_bad_irq+53} {note_interrupt+538} Apr 29 08:35:20 localhost kernel: [ 64.944955] {__do_IRQ+215} {do_IRQ+47} Apr 29 08:35:20 localhost kernel: [ 64.944981] {ksoftirqd+0} {ret_from_intr+0} Apr 29 08:35:20 localhost kernel: [ 64.944992] {thread_return+0} {thread_return+82} Apr 29 08:35:20 localhost kernel: [ 64.945004] {default_idle+0} {default_idle+56} Apr 29 08:35:20 localhost kernel: [ 64.945021] {cpu_idle+150} {start_kernel+485} Apr 29 08:35:20 localhost kernel: [ 64.945036] {_sinittext+646} Apr 29 08:35:20 localhost kernel: [ 64.945047] handlers: Apr 29 08:35:20 localhost kernel: [ 64.945050] [_end+133616688/2132209664] (via_driver_irq_handler+0x0/0x170 [via]) Apr 29 08:35:20 localhost kernel: [ 64.945062] Disabling IRQ #217 Apr 29 08:35:22 localhost kernel: [ 66.952202] hdc: drive_cmd: status=0x51 { DriveReady SeekComplete Error } Apr 29 08:35:22 localhost kernel: [ 66.952212] hdc: drive_cmd: error=0x04 { AbortedCommand } Apr 29 08:35:22 localhost kernel: [ 66.952216] ide: failed opcode was: 0xec Apr 29 08:35:22 localhost kernel: [ 66.972674] hdd: drive_cmd: status=0x51 { DriveReady SeekComplete Error } Apr 29 08:35:22 localhost kernel: [ 66.972683] hdd: drive_cmd: error=0x04 { AbortedCommand } Apr 29 08:35:22 localhost kernel: [ 66.972687] ide: failed opcode was: 0xec Apr 29 08:35:22 localhost kernel: [ 67.064394] hdc: drive_cmd: status=0x51 { DriveReady SeekComplete Error } Apr 29 08:35:22 localhost kernel: [ 67.064403] hdc: drive_cmd: error=0x04 { AbortedCommand } Apr 29 08:35:22 localhost kernel: [ 67.064407] ide: failed opcode was: 0xec Apr 29 08:35:22 localhost kernel: [ 67.084984] hdd: drive_cmd: status=0x51 { DriveReady SeekComplete Error } Apr 29 08:35:22 localhost kernel: [ 67.084994] hdd: drive_cmd: error=0x04 { AbortedCommand } Apr 29 08:35:22 localhost kernel: [ 67.084998] ide: failed opcode was: 0xec hdc is a dvd recorder Lite-On DVDRW SHM-165P6S hdd is a cd burner LG CD-RW CED-8083B I can on both play, read and write cds very well. On hdc I can write dvd-r and dvd+rws very well. But on reading I get similar error commands for dvd roms and self written dvds. I tested also with another dvd-rom drive and got the same errors. The dvdrs are read well after some tries but the reading of dvd-roms is bad some have no sound and i get with mplayer the message "can't seek to block" followed by a big number. I can circumvent this by disabling dma transfer and playing a later chapter and seek back to the previous one. But i cannot use Dvd-Ram if i insert them they are mounted as root not as the user if they are mounted. But the mount command shows that the gid and uid set to the user, the dir under /media for the drive ihas root permissions. If I mount from the drive I get a lot of io errors like this Apr 29 11:28:34 localhost kernel: [10458.016754] attempt to access beyond end of device Apr 29 11:28:34 localhost kernel: [10458.016937] hdc: rw=0, want=8946816, limit=8388604 Apr 29 11:28:34 localhost kernel: [10458.017024] attempt to access beyond end of device Apr 29 11:28:34 localhost kernel: [10458.017103] hdc: rw=0, want=8945792, limit=8388604 Apr 29 11:28:34 localhost kernel: [10458.017185] attempt to access beyond end of device Apr 29 11:28:34 localhost kernel: [10458.017279] hdc: rw=0, want=8945568, limit=8388604 Apr 29 11:28:34 localhost kernel: [10458.017362] attempt to access beyond end of device Apr 29 11:28:34 localhost kernel: [10458.017441] hdc: rw=0, want=8946808, limit=8388604 And if I write I get: Apr 29 11:22:25 localhost kernel: [10088.963117] hdc: media error (bad sector): status=0x51 { DriveReady SeekComplete Error } Apr 29 11:22:25 localhost kernel: [10088.963127] hdc: media error (bad sector): error=0x30 { LastFailedSense=0x03 } Apr 29 11:22:25 localhost kernel: [10088.963131] ide: failed opcode was: unknownApr 29 11:22:25 localhost kernel: [10088.963137] end_request: I/O error, dev hdc, sector 4197904 Apr 29 11:22:25 localhost kernel: [10088.963143] Buffer I/O error on device hdc, logical block 1049476 Apr 29 11:22:25 localhost kernel: [10088.963147] lost page write due to I/O error on hdc Apr 29 11:22:51 localhost kernel: [10115.269667] hdc: media error (bad sector): status=0x51 { DriveReady SeekComplete Error } Apr 29 11:22:51 localhost kernel: [10115.269676] hdc: media error (bad sector): error=0x30 { LastFailedSense=0x03 } Apr 29 11:22:51 localhost kernel: [10115.269681] ide: failed opcode was: unknownApr 29 11:22:51 localhost kernel: [10115.269686] end_request: I/O error, dev hdc, sector 6817552 Apr 29 11:22:51 localhost kernel: [10115.269692] Buffer I/O error on device hdc, logical block 1704388 Apr 29 11:22:51 localhost kernel: [10115.269697] lost page write due to I/O error on hdc Apr 29 11:22:53 localhost kernel: [10117.320325] hdc: media error (bad sector): status=0x51 { DriveReady SeekComplete Error } Apr 29 11:22:53 localhost kernel: [10117.320334] hdc: media error (bad sector): error=0x30 { LastFailedSense=0x03 } Apr 29 11:22:53 localhost kernel: [10117.320338] ide: failed opcode was: unknownApr 29 11:22:53 localhost kernel: [10117.320343] end_request: I/O error, dev hdc, sector 7077920 Apr 29 11:22:53 localhost kernel: [10117.320350] Buffer I/O error on device hdc, logical block 1769480 Apr 29 11:22:53 localhost kernel: [10117.320354] lost page write due to I/O error on hdc Apr 29 11:23:00 localhost kernel: [10123.532365] hdc: media error (bad sector): status=0x51 { DriveReady SeekComplete Error } Apr 29 11:23:00 localhost kernel: [10123.532375] hdc: media error (bad sector): error=0x30 { LastFailedSense=0x03 } Apr 29 11:23:00 localhost kernel: [10123.532379] ide: failed opcode was: unknownApr 29 11:23:00 localhost kernel: [10123.532385] end_request: I/O error, dev hdc, sector 7079712 Apr 29 11:23:00 localhost kernel: [10123.532390] Buffer I/O error on device hdc, logical block 1769928 Apr 29 11:23:00 localhost kernel: [10123.532394] lost page write due to I/O error on hdc Apr 29 11:23:05 localhost kernel: [10129.367259] hdc: media error (bad sector): status=0x51 { DriveReady SeekComplete Error } Apr 29 11:23:05 localhost kernel: [10129.367269] hdc: media error (bad sector): error=0x30 { LastFailedSense=0x03 } Apr 29 11:23:05 localhost kernel: [10129.367273] ide: failed opcode was: unknownApr 29 11:23:05 localhost kernel: [10129.367279] end_request: I/O error, dev hdc, sector 7081504 I have dapper installed on an amd64 sempron 2800+. Before dapper I used a self made system with kernel 2.6.13 with a amd k6-3. There I had the same cd burner and the cd-rom i tested also with the new system. I hadn't this errors before. Disabling dma and using the generic ide driver doesn't help. Thank you for help. -- Erros on writing and reading a dvd-ram https://launchpad.net/bugs/42023 From mascha at ma-scha.de Sat Apr 29 10:06:03 2006 From: mascha at ma-scha.de (Martin Schaaf) Date: Sat, 29 Apr 2006 10:06:03 -0000 Subject: [Bug 42023] Re: Erros on writing and reading a dvd-ram References: <20060429095912.30638.41865.malonedeb@gangotri.ubuntu.com> Message-ID: <20060429100603.30638.61050.malone@gangotri.ubuntu.com> I also connected the dvd recorder over a firewire adapter to my system and I got similar writing and reading errors from the scsi driver. -- Erros on writing and reading a dvd-ram https://launchpad.net/bugs/42023 From mascha at ma-scha.de Sat Apr 29 10:07:26 2006 From: mascha at ma-scha.de (Martin Schaaf) Date: Sat, 29 Apr 2006 10:07:26 -0000 Subject: [Bug 42023] Re: Erros on writing and reading a dvd-ram References: <20060429095912.30638.41865.malonedeb@gangotri.ubuntu.com> Message-ID: <20060429100726.30606.54906.malone@gangotri.ubuntu.com> I also connected the dvd recorder over a firewire adapter to my system and I got similar writing and reading errors from the scsi driver. -- Erros on writing and reading a dvd-ram https://launchpad.net/bugs/42023 From leon at tim-online.nl Sat Apr 29 10:15:19 2006 From: leon at tim-online.nl (Leon) Date: Sat, 29 Apr 2006 10:15:19 -0000 Subject: [Bug 41968] Wrong firmware loaded for acx driver References: <20060428210819.29040.89210.malonedeb@gandwana.ubuntu.com> Message-ID: <20060429101519.30606.61787.launchpad@canonical@gangotri.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: My wireless lan card would not work. So I read " "/lib/firmware/2.6.15-20-386/acx/readme.txt". It said I had to load another firmware and report it. So here's my report. This worked: sudo modprobe acx firmware_ver=1.2.0.30 And this was the output requested: leon at tim:/etc/modprobe.d$ lspci -vv && lspci -vvn && lsusb 0000:00:00.0 Host bridge: Intel Corporation 82830 830 Chipset Host Bridge (rev 04) Subsystem: Intel Corporation: Unknown device 1969 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- (32-bit, prefetchable) Capabilities: 0000:00:02.0 VGA compatible controller: Intel Corporation 82830 CGC [Chipset Graphics Controller] (rev 04) (prog-if 00 [VGA]) Subsystem: Dell: Unknown device 00b8 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- 0000:00:02.1 Display controller: Intel Corporation 82830 CGC [Chipset Graphics Controller] Subsystem: Dell: Unknown device 00b8 Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- 0000:00:1d.0 USB Controller: Intel Corporation 82801CA/CAM USB (Hub #1) (rev 02) (prog-if 00 [UHCI]) Subsystem: Intel Corporation Latitude C640 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- TAbort- SERR- Reset- FastB2B- 0000:00:1f.0 ISA bridge: Intel Corporation 82801CAM ISA Bridge (LPC) (rev 02) Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- Region 1: I/O ports at Region 2: I/O ports at Region 3: I/O ports at Region 4: I/O ports at 1860 [size=16] Region 5: Memory at e0100000 (32-bit, non-prefetchable) [size=1K] 0000:00:1f.3 SMBus: Intel Corporation 82801CA/CAM SMBus Controller (rev 02) Subsystem: Intel Corporation: Unknown device 4541 Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- 0000:02:04.0 CardBus bridge: O2 Micro, Inc. OZ601/6912/711E0 CardBus/SmartCardBus Controller Subsystem: Dell: Unknown device 00b8 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- SERR- Reset- 16bInt- PostWrite+ 16-bit legacy interface ports at 0001 0000:03:00.0 Network controller: Texas Instruments ACX 111 54Mbps Wireless Interface Subsystem: Unknown device 010e:16ec Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- 0000:00:00.0 0600: 8086:3575 (rev 04) Subsystem: 8086:1969 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- (32-bit, prefetchable) Capabilities: 0000:00:02.0 0300: 8086:3577 (rev 04) Subsystem: 1028:00b8 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- 0000:00:02.1 0380: 8086:3577 Subsystem: 1028:00b8 Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- 0000:00:1d.0 0c03: 8086:2482 (rev 02) Subsystem: 8086:4541 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- TAbort- SERR- Reset- FastB2B- 0000:00:1f.0 0601: 8086:248c (rev 02) Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- Region 1: I/O ports at Region 2: I/O ports at Region 3: I/O ports at Region 4: I/O ports at 1860 [size=16] Region 5: Memory at e0100000 (32-bit, non-prefetchable) [size=1K] 0000:00:1f.3 0c05: 8086:2483 (rev 02) Subsystem: 8086:4541 Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- 0000:02:04.0 0607: 1217:6972 Subsystem: 1028:00b8 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- SERR- Reset- 16bInt- PostWrite+ 16-bit legacy interface ports at 0001 0000:03:00.0 0280: 104c:9066 Subsystem: 010e:16ec Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- Bus 001 Device 001: ID 0000:0000 Bus 002 Device 001: ID 0000:0000 -- Wrong firmware loaded for acx driver https://launchpad.net/bugs/41968 From samtygier at yahoo.co.uk Sat Apr 29 10:15:19 2006 From: samtygier at yahoo.co.uk (sam tygier) Date: Sat, 29 Apr 2006 10:15:19 -0000 Subject: [Bug 41968] Re: Wrong firmware loaded for acx driver References: <20060428210819.29040.89210.malonedeb@gandwana.ubuntu.com> Message-ID: <20060429101519.30606.58762.launchpad@gangotri.ubuntu.com> ** Changed in: Ubuntu Sourcepackagename: None => linux-source-2.6.15 -- Wrong firmware loaded for acx driver https://launchpad.net/bugs/41968 From igor4u at gmail.com Sat Apr 29 11:11:36 2006 From: igor4u at gmail.com (Igor Zubarev) Date: Sat, 29 Apr 2006 11:11:36 -0000 Subject: [Bug 31293] Re: [Bug 31293] Re: [Bug 31293] Re: My laptop doesn't resume from S3 ACPI sleep state. References: <20060213101035.1233.41596.malonedeb@gandwana.ubuntu.com> <20060429051557.30638.85148.malone@gangotri.ubuntu.com> <1146299396.4592.2.camel@localhost> Message-ID: <277109730604290411v7361f402p14b9ec298756d43b@mail.gmail.com> > You can add soundcard to the list of modules that should be removed > before suspend/hibernate (and restored after resume). I think it's better to change settings for all users by developers. Because it's very annoying bug since Breezy. I tryed hibernate then and decided never use it it in order save my laptop and souncard working. If you like "nv" rather than "NVidia" you can try to call video-post > after resume... > No, I prefer using "Nvidia" driver. Igor -- My laptop doesn't resume from S3 ACPI sleep state. https://launchpad.net/bugs/31293 From aelfweld at hotmail.com Sat Apr 29 11:44:27 2006 From: aelfweld at hotmail.com (Donahj) Date: Sat, 29 Apr 2006 11:44:27 -0000 Subject: [Bug 31527] Re: DRI locks up the machine when starting X on a Radeon 9250 References: <20060215163856.15884.24165.malonedeb@gangotri.ubuntu.com> Message-ID: <20060429114427.30606.89341.malone@gangotri.ubuntu.com> I dowloaded and installed ubuntu 5.10 on DVD and had a problem with my PCI radeon 9250 just as described here. After poking around a little I tried adding the modules DBE and V41 to the list of loaded modules. Mostly because DBE was mentioned in the context of secondary VGA cards. Well wouldn't you know that X started working with DRI. I am not sure this will work for others but it might be worth a try -- DRI locks up the machine when starting X on a Radeon 9250 https://launchpad.net/bugs/31527 From joachim.beckers at belgacom.net Sat Apr 29 12:27:11 2006 From: joachim.beckers at belgacom.net (Joachim Beckers) Date: Sat, 29 Apr 2006 12:27:11 -0000 Subject: [Bug 35054] Re: Cannot mount FAT partitions References: <20060315140318.6537.81237.malonedeb@gangotri.ubuntu.com> Message-ID: <20060429122711.30638.67044.malone@gangotri.ubuntu.com> or maybe your fstab line has UTF8 as an option in it while the filesystems are not in utf8? -- Cannot mount FAT partitions https://launchpad.net/bugs/35054 From joachim.beckers at belgacom.net Sat Apr 29 12:43:35 2006 From: joachim.beckers at belgacom.net (Joachim Beckers) Date: Sat, 29 Apr 2006 12:43:35 -0000 Subject: [Bug 37163] Re: EFI-support in kernel causes I/O errors with iPods References: <20060329132453.6279.44854.malonedeb@gandwana.ubuntu.com> Message-ID: <20060429124336.30606.75207.launchpad@gangotri.ubuntu.com> ** Bug 26365 has been marked a duplicate of this bug -- EFI-support in kernel causes I/O errors with iPods https://launchpad.net/bugs/37163 From joachim.beckers at belgacom.net Sat Apr 29 12:45:09 2006 From: joachim.beckers at belgacom.net (Joachim Beckers) Date: Sat, 29 Apr 2006 12:45:09 -0000 Subject: [Bug 26365] Re: Problem to sync or copy files with Ipod References: <20060113144911.21012.1421.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060429124509.16712.40405.malone@gandwana.ubuntu.com> *** This bug is a duplicate of bug 37163 *** marked as duplicate. seems to be the same problem ** This bug has been marked a duplicate of bug 37163 EFI-support in kernel causes I/O errors with iPods -- Problem to sync or copy files with Ipod https://launchpad.net/bugs/26365 From joachim.beckers at belgacom.net Sat Apr 29 12:59:48 2006 From: joachim.beckers at belgacom.net (Joachim Beckers) Date: Sat, 29 Apr 2006 12:59:48 -0000 Subject: [Bug 37163] Re: EFI-support in kernel causes I/O errors with iPods References: <20060329132453.6279.44854.malonedeb@gandwana.ubuntu.com> Message-ID: <20060429125948.16739.75279.malone@gandwana.ubuntu.com> "Jorg Schuler: it seems a patch was introduced in kernel version 2.6.10" => it's included by default. so clearly it doesn't do the right job. is there any way to disable EFI at boot-time? if not, the only way to fix this is by disabling it completely, I guess. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Needs Info => Confirmed -- EFI-support in kernel causes I/O errors with iPods https://launchpad.net/bugs/37163 From emamo91 at gmail.com Sat Apr 29 13:26:37 2006 From: emamo91 at gmail.com (eMamo) Date: Sat, 29 Apr 2006 13:26:37 -0000 Subject: [Bug 41288] espresso installer is'nt responding/crashes during the installation References: <20060425122622.28879.89682.malonedeb@gandwana.ubuntu.com> Message-ID: <20060429132637.16739.83611.launchpad@canonical@gandwana.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Needs Info Description: I tried to install Dapper through the live cd and espresso, but after it finish editing the partition and gets to 25% of the installation, the install stop responding, gnome is either stop responding, and when i press CTRL+ALT+f1 it changes to the terminal, but when i try to run a command (like top,kill, etc...) it just not responding. p.s. the mouse and the keyboard are responding, when evrything else crashes. -- espresso installer is'nt responding/crashes during the installation https://launchpad.net/bugs/41288 From cjwatson at canonical.com Sat Apr 29 13:26:37 2006 From: cjwatson at canonical.com (Colin Watson) Date: Sat, 29 Apr 2006 13:26:37 -0000 Subject: [Bug 41288] Re: espresso installer is'nt responding/crashes during the installation References: <20060425122622.28879.89682.malonedeb@gandwana.ubuntu.com> Message-ID: <20060429132637.16739.27473.malone@gandwana.ubuntu.com> Sounds like more than the installer is unhappy. Have you tried running a CD integrity check from the CD's boot menu? ** Changed in: ubiquity (Ubuntu) Sourcepackagename: ubiquity => linux-source-2.6.15 Status: Unconfirmed => Needs Info -- espresso installer is'nt responding/crashes during the installation https://launchpad.net/bugs/41288 From arzajac at yahoo.ca Sat Apr 29 13:24:05 2006 From: arzajac at yahoo.ca (Andrew Zajac) Date: Sat, 29 Apr 2006 13:24:05 -0000 Subject: [Bug 36158] Re: System does not shutdown References: <20060323145229.5380.85426.malonedeb@gangotri.ubuntu.com> Message-ID: <20060429132405.30606.40672.launchpad@gangotri.ubuntu.com> ** Attachment added: "dmidecode output" http://librarian.launchpad.net/2416434/filedmi ** Attachment added: "dmesg " http://librarian.launchpad.net/2416435/dmegs -- System does not shutdown https://launchpad.net/bugs/36158 From launchpad.net.tormod at xoxy.net Sat Apr 29 14:05:55 2006 From: launchpad.net.tormod at xoxy.net (Tormod Volden) Date: Sat, 29 Apr 2006 14:05:55 -0000 Subject: [Bug 36983] Re: Acer Travelmate 8103 needs "noapic" to boot installer References: <20060328105503.6279.36895.malonedeb@gandwana.ubuntu.com> Message-ID: <20060429140555.30638.26576.launchpad@gangotri.ubuntu.com> ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Fix Committed => Fix Released -- Acer Travelmate 8103 needs "noapic" to boot installer https://launchpad.net/bugs/36983 From mthaddon at yahoo.com Sat Apr 29 14:26:57 2006 From: mthaddon at yahoo.com (Tom Haddon) Date: Sat, 29 Apr 2006 14:26:57 -0000 Subject: [Bug 42067] Re: not working on Broadcom Corporation BCM4306 802.11b/g Wireless LAN Controller (rev 03) References: <20060429142209.16712.73035.malonedeb@gandwana.ubuntu.com> Message-ID: <20060429142657.16712.81245.malone@gandwana.ubuntu.com> I should also mention that I have blacklisted bcm43xx in /etc/modprobe.d/blacklist while trying to get ndiswrapper working. My laptop is an HP Pavilion zv5405us. More detailed specs here: http://words.haddons.net/archives/000039.html and http://h10025.www1.hp.com/ewfrf/wc/genericDocument?cc=us&docname=c00286662&lc=en&jumpid=reg_R1002_USEN Thanks, Tom -- not working on Broadcom Corporation BCM4306 802.11b/g Wireless LAN Controller (rev 03) https://launchpad.net/bugs/42067 From nossa.giampietro at libero.it Sat Apr 29 14:28:47 2006 From: nossa.giampietro at libero.it (gian) Date: Sat, 29 Apr 2006 14:28:47 -0000 Subject: [Bug 42067] Re: not working on Broadcom Corporation BCM4306 802.11b/g Wireless LAN Controller (rev 03) References: <20060429142209.16712.73035.malonedeb@gandwana.ubuntu.com> Message-ID: <20060429142848.16712.19387.malone@gandwana.ubuntu.com> broadcom wlan on my acer aspire5024wlmi don't run -- not working on Broadcom Corporation BCM4306 802.11b/g Wireless LAN Controller (rev 03) https://launchpad.net/bugs/42067 From mthaddon at yahoo.com Sat Apr 29 14:22:09 2006 From: mthaddon at yahoo.com (Tom Haddon) Date: Sat, 29 Apr 2006 14:22:09 -0000 Subject: [Bug 42067] not working on Broadcom Corporation BCM4306 802.11b/g Wireless LAN Controller (rev 03) References: <20060429142209.16712.73035.malonedeb@gandwana.ubuntu.com> Message-ID: <20060429142209.16712.73035.malonedeb@gandwana.ubuntu.com> Public bug reported: Affects: ndiswrapper (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: I have tried both ndiswrapper and bcm43xx on Dapper Drake and neither has worked for me. I am filing this as an ndiswrapper problem, but will also describe my problems with bcm43xx if that helps. I had ndiswrapper working fine on Breezy, but as soon as I upgraded to Dapper, it wouldn't work. After sudo modprobe ndiswrapper I have some sample output to help here. mthaddon at ubuntu:~$ dmesg | egrep -i 'wlan0|ndis' [4295866.569000] ndiswrapper version 1.15 loaded (preempt=yes,smp=yes) [4295866.672000] ndiswrapper: driver bcmwl5 (Broadcom,02/11/2005, 3.100.64.0) loaded [4295866.680000] ndiswrapper: using irq 225 [4295867.687000] wlan0: vendor: '' [4295867.687000] wlan0: ndiswrapper ethernet device 00:90:4b:b7:5d:39 using driver bcmwl5, 14E4:4320:103C:12F8.5.conf [4295867.687000] wlan0: encryption modes supported: WEP; TKIP with WPA, WPA2, WPA2PSK; AES/CCMP with WPA, WPA2, WPA2PSK [4295878.616000] wlan0: no IPv6 routers present mthaddon at ubuntu:~$ lsmod | grep ndiswrapper ndiswrapper 201104 0 usbcore 137476 4 ndiswrapper,ehci_hcd,ohci_hcd mthaddon at ubuntu:~$ sudo iwlist wlan0 scan wlan0 No scan results mthaddon at ubuntu:~$ dpkg --list | grep ndis ii ndiswrapper-modules-2.6.15-20-k7 1.14-1 Linux kernel module for NdisWrapper for 2.6. ii ndiswrapper-modules-2.6.15-21-k7 1.15-1 Linux kernel module for NdisWrapper for 2.6. ii ndiswrapper-utils 1.8-1 User space tools for ndiswrapper mthaddon at ubuntu:~$ uname -a Linux ubuntu 2.6.15-21-k7 #1 SMP PREEMPT Fri Apr 21 17:10:51 UTC 2006 i686 GNU/Linux I built these packages by following section 4 of this guide: https://wiki.ubuntu.com/WifiDocs/Driver/Ndiswrapper?highlight=%28ndiswrapper%29 #head-c1ebf95637d110c5f01b9a1383d137f79d8cbddb Thanks, Tom -- not working on Broadcom Corporation BCM4306 802.11b/g Wireless LAN Controller (rev 03) https://launchpad.net/bugs/42067 From wambam at mailinator.com Sat Apr 29 14:49:46 2006 From: wambam at mailinator.com (wammer) Date: Sat, 29 Apr 2006 14:49:46 -0000 Subject: [Bug 33368] Re: X freeze the computer (Dapper - glcore) References: <20060302082234.17525.50004.malonedeb@gangotri.ubuntu.com> Message-ID: <20060429144946.16739.20506.malone@gandwana.ubuntu.com> I have this error but the computer does not "freeze", it just goes into tty and X will not start -- X freeze the computer (Dapper - glcore) https://launchpad.net/bugs/33368 From mark at canonical.com Sat Apr 29 14:58:55 2006 From: mark at canonical.com (Mark Shuttleworth) Date: Sat, 29 Apr 2006 14:58:55 -0000 Subject: [Bug 42060] Atheros wifi cards appear not to be working in 2.6.25-21 References: <44530682.2070000@canonical.com> Message-ID: <20060429145855.16739.45735.launchpad@canonical@gandwana.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: With the latest kernel I'm not able to use an atheros based wifi pcmcia card. Here is the output from dmesg when the card is inserted: [4294818.853000] pccard: CardBus card inserted into slot 0 [4294818.909000] ath_rate_sample: Unknown symbol ath_hal_computetxtime [4294818.910000] ath_pci: Unknown symbol ath_rate_tx_complete [4294818.910000] ath_pci: Unknown symbol _ath_hal_attach [4294818.910000] ath_pci: Unknown symbol ath_rate_attach [4294818.910000] ath_pci: Unknown symbol ath_rate_newassoc [4294818.910000] ath_pci: Unknown symbol ath_hal_computetxtime [4294818.911000] ath_pci: Unknown symbol ath_rate_dynamic_sysctl_register [4294818.911000] ath_pci: Unknown symbol ath_hal_mhz2ieee [4294818.911000] ath_pci: Unknown symbol ath_hal_detach [4294818.911000] ath_pci: Unknown symbol ath_hal_probe [4294818.912000] ath_pci: Unknown symbol ath_rate_node_cleanup [4294818.912000] ath_pci: Unknown symbol ath_rate_detach [4294818.912000] ath_pci: Unknown symbol ath_rate_node_init [4294818.912000] ath_pci: Unknown symbol ath_rate_findrate [4294818.913000] ath_pci: Unknown symbol ath_hal_init_channels [4294818.913000] ath_pci: Unknown symbol ath_rate_newstate [4294818.913000] ath_pci: Unknown symbol ath_rate_setupxtxdesc [4294818.913000] ath_pci: Unknown symbol ath_hal_getwirelessmodes affects /distros/ubuntu -- Atheros wifi cards appear not to be working in 2.6.25-21 https://launchpad.net/bugs/42060 From samtygier at yahoo.co.uk Sat Apr 29 14:58:55 2006 From: samtygier at yahoo.co.uk (sam tygier) Date: Sat, 29 Apr 2006 14:58:55 -0000 Subject: [Bug 42060] Re: Atheros wifi cards appear not to be working in 2.6.25-21 References: <44530682.2070000@canonical.com> Message-ID: <20060429145855.16739.19158.launchpad@gandwana.ubuntu.com> ** Changed in: Ubuntu Sourcepackagename: None => linux-source-2.6.15 -- Atheros wifi cards appear not to be working in 2.6.25-21 https://launchpad.net/bugs/42060 From wink at saville.com Sat Apr 29 15:20:52 2006 From: wink at saville.com (wink saville) Date: Sat, 29 Apr 2006 15:20:52 -0000 Subject: [Bug 42079] Boot of Linux version 2.6.15-21-amd64-generic on hpzv5000 failed References: <20060429151736.30606.44203.malonedeb@gangotri.ubuntu.com> Message-ID: <20060429152052.16712.69267.launchpad@canonical@gandwana.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: I was booting using 2.6.15-21 and at the "Loading Hardware Drivers" message the system hung. I waited about 2 minutes and then rebooted. This time successfully execpt my mouse, a usb logitech MX500, isn't working. If a boot fails, what is the best method of capturing the messages? Here is the output of dmesg of the boot that succeeded except for the mouse: wink at hpz5:~$ cat dmesg.060429-0800.log [ 0.000000] Bootdata ok (command line is root=/dev/hda4 ro quiet splash) [ 0.000000] Linux version 2.6.15-21-amd64-generic (buildd at crested) (gcc version 4.0.3 (Ubuntu 4.0.3-1ubuntu5)) #1 SMP PREEMPT Fri Apr 21 16:42:20 UTC 2006 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000d0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000004ff70000 (usable) [ 0.000000] BIOS-e820: 000000004ff70000 - 000000004ff7f000 (ACPI data) [ 0.000000] BIOS-e820: 000000004ff7f000 - 000000004ff80000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000004ff80000 - 0000000050000000 (reserved) [ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) [ 0.000000] ACPI: RSDP (v000 PTLTD ) @ 0x00000000000f7240 [ 0.000000] ACPI: RSDT (v001 PTLTD RSDT 0x06040000 LTP 0x00000000) @ 0x000000004ff7a87e [ 0.000000] ACPI: FADT (v001 NVIDIA CK8 0x06040000 PTL_ 0x000f4240) @ 0x000000004ff7ee13 [ 0.000000] ACPI: MADT (v001 NVIDIA NV_APIC_ 0x06040000 LTP 0x00000000) @ 0x000000004ff7ee87 [ 0.000000] ACPI: BOOT (v001 PTLTD $SBFTBL$ 0x06040000 LTP 0x00000001) @ 0x000000004ff7eee1 [ 0.000000] ACPI: SSDT (v001 PTLTD POWERNOW 0x06040000 LTP 0x00000001) @ 0x000000004ff7ef09 [ 0.000000] ACPI: DSDT (v001 NVIDIA CK8 0x06040000 MSFT 0x0100000e) @ 0x0000000000000000 [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] Number of nodes 1 [ 0.000000] Node 0 MemBase 0000000000000000 Limit 000000004ff70000 [ 0.000000] Using 63 for the hash shift. [ 0.000000] Using node hash shift of 63 [ 0.000000] Bootmem setup node 0 0000000000000000-000000004ff70000 [ 0.000000] No mptable found. [ 0.000000] On node 0 totalpages: 322040 [ 0.000000] DMA zone: 3022 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 319018 pages, LIFO batch:31 [ 0.000000] Normal zone: 0 pages, LIFO batch:0 [ 0.000000] HighMem zone: 0 pages, LIFO batch:0 [ 0.000000] Nvidia board detected. Ignoring ACPI timer override. [ 0.000000] ACPI: PM-Timer IO Port: 0x8008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 15:4 APIC version 16 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: BIOS IRQ0 pin2 override ignored. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Setting APIC routing to physical flat [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 60000000 (gap: 50000000:aff80000) [ 0.000000] Checking aperture... [ 0.000000] CPU 0: aperture @ e8000000 size 128 MB [ 0.000000] SMP: Allowing 3 CPUs, 2 hotplug CPUs [ 0.000000] Built 1 zonelists [ 0.000000] Kernel command line: root=/dev/hda4 ro quiet splash [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 131072 bytes) [ 0.000000] time.c: Using 3.579545 MHz PM timer. [ 0.000000] time.c: Detected 797.954 MHz processor. [ 18.665794] Console: colour VGA+ 80x25 [ 18.668329] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 18.672252] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 18.698361] Memory: 1277896k/1310144k available (2131k kernel code, 31860k reserved, 751k data, 180k init) [ 18.758143] Calibrating delay using timer specific routine.. 1597.28 BogoMIPS (lpj=798642) [ 18.758254] Security Framework v1.0.0 initialized [ 18.758268] SELinux: Disabled at boot. [ 18.758313] Mount-cache hash table entries: 256 [ 18.758518] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 18.758525] CPU: L2 Cache: 1024K (64 bytes/line) [ 18.758531] CPU 0(1) -> Node 0 -> Core 0 [ 18.758546] mtrr: v2.0 (20020519) [ 18.758561] SMP alternatives: switching to UP code [ 18.759094] checking if image is initramfs... it is [ 20.107470] Freeing initrd memory: 6877k freed [ 20.116454] ACPI: Looking for DSDT ... not found! [ 20.151418] Using local APIC timer interrupts. [ 20.276718] Detected 12.468 MHz APIC timer. [ 20.276811] Brought up 1 CPUs [ 20.276849] time.c: Using PIT/TSC based timekeeping. [ 20.276854] testing NMI watchdog ... OK. [ 20.287399] NET: Registered protocol family 16 [ 20.287442] ACPI: bus type pci registered [ 20.287453] PCI: Using configuration type 1 [ 20.288417] ACPI: Subsystem revision 20051216 [ 20.291852] ACPI: Interpreter enabled [ 20.291857] ACPI: Using IOAPIC for interrupt routing [ 20.292633] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 20.292640] PCI: Probing PCI hardware (bus 00) [ 20.320946] Boot video device is 0000:01:00.0 [ 20.321030] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 20.357294] ACPI: Embedded Controller [EC0] (gpe 33) interrupt mode. [ 20.404342] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P0._PRT] [ 20.404908] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP0._PRT] [ 20.406343] ACPI: PCI Interrupt Link [LNK1] (IRQs 16 18 19) *0 [ 20.407133] ACPI: PCI Interrupt Link [LNK2] (IRQs 16 18 19) *0 [ 20.407911] ACPI: PCI Interrupt Link [LNK3] (IRQs 17) *0 [ 20.408687] ACPI: PCI Interrupt Link [LNK4] (IRQs 16 18 19) *0, disabled. [ 20.409464] ACPI: PCI Interrupt Link [LNK5] (IRQs 16 18 19) *0 [ 20.410231] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22) *0 [ 20.411002] ACPI: PCI Interrupt Link [LUS0] (IRQs 20 21 22) *0 [ 20.411779] ACPI: PCI Interrupt Link [LUS1] (IRQs 20 21 22) *0 [ 20.412542] ACPI: PCI Interrupt Link [LUS2] (IRQs 20 21 22) *0 [ 20.413307] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22) *0, disabled. [ 20.414074] ACPI: PCI Interrupt Link [LACI] (IRQs 20 21 22) *0 [ 20.414846] ACPI: PCI Interrupt Link [LMCI] (IRQs 20 21 22) *0 [ 20.415611] ACPI: PCI Interrupt Link [LPID] (IRQs 20 21 22) *0, disabled. [ 20.416393] ACPI: PCI Interrupt Link [LTID] (IRQs 20 21 22) *0, disabled. [ 20.416645] Linux Plug and Play Support v0.97 (c) Adam Belay [ 20.416661] pnp: PnP ACPI init [ 20.444262] pnp: PnP ACPI: found 12 devices [ 20.444288] PCI: Using ACPI for IRQ routing [ 20.444295] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 20.444448] agpgart: Detected AGP bridge 0 [ 20.444460] agpgart: Setting up Nforce3 AGP. [ 20.451904] agpgart: AGP aperture is 128M @ 0xe8000000 [ 20.451934] PCI-DMA: Disabling IOMMU. [ 20.452918] pnp: 00:00: ioport range 0x8000-0x807f could not be reserved [ 20.452927] pnp: 00:00: ioport range 0x8080-0x80ff has been reserved [ 20.452934] pnp: 00:00: ioport range 0x8400-0x847f has been reserved [ 20.452942] pnp: 00:00: ioport range 0x8480-0x84ff could not be reserved [ 20.452949] pnp: 00:00: ioport range 0x8800-0x887f has been reserved [ 20.452956] pnp: 00:00: ioport range 0x8880-0x88ff has been reserved [ 20.452963] pnp: 00:00: ioport range 0x2040-0x207f has been reserved [ 20.452970] pnp: 00:00: ioport range 0x2000-0x203f has been reserved [ 20.453356] PCI: Failed to allocate mem resource #10:2000000 at e2000000 for 0000:02:04.0 [ 20.453415] PCI: Failed to allocate mem resource #10:2000000 at e2000000 for 0000:02:04.1 [ 20.453469] PCI: Bus 3, cardbus bridge: 0000:02:04.0 [ 20.453475] IO window: 00003000-000030ff [ 20.453488] IO window: 00003400-000034ff [ 20.453496] PREFETCH window: 60000000-61ffffff [ 20.453503] PCI: Bus 7, cardbus bridge: 0000:02:04.1 [ 20.453508] IO window: 00003800-000038ff [ 20.453514] IO window: 00003c00-00003cff [ 20.453522] PREFETCH window: 62000000-63ffffff [ 20.453528] PCI: Bridge: 0000:00:0a.0 [ 20.453534] IO window: 3000-7fff [ 20.453541] MEM window: e0100000-e17fffff [ 20.453548] PREFETCH window: 60000000-63ffffff [ 20.453556] PCI: Bridge: 0000:00:0b.0 [ 20.453560] IO window: disabled. [ 20.453568] MEM window: e2000000-e2ffffff [ 20.453576] PREFETCH window: f0000000-f80fffff [ 20.453591] PCI: Setting latency timer of device 0000:00:0a.0 to 64 [ 20.454219] ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 19 [ 20.454229] GSI 16 sharing vector 0xB1 and IRQ 16 [ 20.454237] ACPI: PCI Interrupt 0000:02:04.0[A] -> Link [LNK1] -> GSI 19 (level, low) -> IRQ 177 [ 20.454844] ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 18 [ 20.454851] GSI 17 sharing vector 0xB9 and IRQ 17 [ 20.454858] ACPI: PCI Interrupt 0000:02:04.1[B] -> Link [LNK2] -> GSI 18 (level, low) -> IRQ 185 [ 20.455088] Simple Boot Flag at 0x37 set to 0x1 [ 20.455352] IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $ [ 20.455954] audit: initializing netlink socket (disabled) [ 20.455974] audit(1146322095.791:1): initialized [ 20.456213] VFS: Disk quotas dquot_6.5.1 [ 20.456245] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 20.456335] Initializing Cryptographic API [ 20.456343] io scheduler noop registered [ 20.456359] io scheduler anticipatory registered [ 20.456372] io scheduler deadline registered [ 20.456402] io scheduler cfq registered [ 20.485214] Linux agpgart interface v0.101 (c) Dave Jones [ 20.485383] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 20.492413] i8042.c: Detected active multiplexing controller, rev 1.1. [ 20.498670] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 20.499366] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 20.500343] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 20.501218] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 20.502243] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 20.502251] Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled [ 20.506708] ACPI: PCI Interrupt Link [LMCI] enabled at IRQ 22 [ 20.506718] GSI 18 sharing vector 0xC1 and IRQ 18 [ 20.506727] ACPI: PCI Interrupt 0000:00:06.1[B] -> Link [LMCI] -> GSI 22 (level, low) -> IRQ 193 [ 20.506742] ACPI: PCI interrupt for device 0000:00:06.1 disabled [ 20.507486] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 20.507572] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 20.507579] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 20.507810] mice: PS/2 mouse device common for all mice [ 20.507959] NET: Registered protocol family 2 [ 20.520678] IP route cache hash table entries: 65536 (order: 7, 524288 bytes) [ 20.521566] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 20.528648] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 20.529816] TCP: Hash tables configured (established 262144 bind 65536) [ 20.529823] TCP reno registered [ 20.529993] TCP bic registered [ 20.530008] NET: Registered protocol family 1 [ 20.530020] NET: Registered protocol family 8 [ 20.530025] NET: Registered protocol family 20 [ 20.530264] ACPI wakeup devices: [ 20.530269] USB0 USB1 USB2 PS2K PS2M MAC0 [ 20.530277] ACPI: (supports S0 S3 S4 S5) [ 20.530395] Freeing unused kernel memory: 180k freed [ 20.572803] input: AT Translated Set 2 keyboard as /class/input/input0 [ 20.642381] vga16fb: initializing [ 20.642390] vga16fb: mapped to 0xffff8100000a0000 [ 20.825446] Console: switching to colour frame buffer device 80x25 [ 20.825457] fb0: VGA16 VGA frame buffer device [ 22.009210] Capability LSM initialized [ 22.068621] ACPI: CPU0 (power states: C1[C1] C2[C2]) [ 22.080648] ACPI: Thermal Zone [THRM] (29 C) [ 23.058173] SCSI subsystem initialized [ 23.061176] libata version 1.20 loaded. [ 23.067278] NFORCE3-150: IDE controller at PCI slot 0000:00:08.0 [ 23.067309] NFORCE3-150: chipset revision 165 [ 23.067313] NFORCE3-150: not 100% native mode: will probe irqs later [ 23.067322] NFORCE3-150: BIOS didn't set cable bits correctly. Enabling workaround. [ 23.067331] NFORCE3-150: 0000:00:08.0 (rev a5) UDMA133 controller [ 23.067347] ide0: BM-DMA at 0x2080-0x2087, BIOS settings: hda:DMA, hdb:pio [ 23.067365] ide1: BM-DMA at 0x2088-0x208f, BIOS settings: hdc:DMA, hdd:pio [ 23.067380] Probing IDE interface ide0... [ 23.330464] hda: TOSHIBA MK8025GAS, ATA DISK drive [ 23.942260] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 23.992423] Probing IDE interface ide1... [ 24.663944] hdc: HL-DT-ST DVD-RW GWA-4080N, ATAPI CD/DVD-ROM drive [ 24.971112] ide1 at 0x170-0x177,0x376 on irq 15 [ 24.988018] hda: max request size: 128KiB [ 25.001427] hda: 156301488 sectors (80026 MB), CHS=65535/16/63, UDMA(100) [ 25.001499] hda: cache flushes supported [ 25.001777] hda: hda1 hda2 hda3 hda4 [ 25.093301] hdc: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, DMA [ 25.093317] Uniform CD-ROM driver Revision: 3.20 [ 25.626050] usbcore: registered new driver usbfs [ 25.626625] usbcore: registered new driver hub [ 25.629429] ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) [ 25.630040] PCI: Enabling device 0000:00:02.0 (0004 -> 0006) [ 25.630159] ACPI: PCI Interrupt 0000:00:02.0[P]: no GSI - using IRQ 11 [ 25.630717] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 25.630728] ohci_hcd 0000:00:02.0: OHCI Host Controller [ 25.873789] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1 [ 25.873815] ohci_hcd 0000:00:02.0: irq 11, io mem 0xe0000000 [ 25.928062] hub 1-0:1.0: USB hub found [ 25.928097] hub 1-0:1.0: 3 ports detected [ 26.029349] PCI: Enabling device 0000:00:02.1 (0004 -> 0006) [ 26.031346] ACPI: PCI Interrupt Link [LUS1] enabled at IRQ 21 [ 26.031364] GSI 19 sharing vector 0xC9 and IRQ 19 [ 26.031378] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LUS1] -> GSI 21 (level, low) -> IRQ 201 [ 26.031746] PCI: Setting latency timer of device 0000:00:02.1 to 64 [ 26.031760] ohci_hcd 0000:00:02.1: OHCI Host Controller [ 26.245492] ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2 [ 26.245534] ohci_hcd 0000:00:02.1: irq 201, io mem 0xe0001000 [ 26.299974] hub 2-0:1.0: USB hub found [ 26.300003] hub 2-0:1.0: 3 ports detected [ 26.410878] ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 20 [ 26.410898] GSI 20 sharing vector 0xD1 and IRQ 20 [ 26.410913] ACPI: PCI Interrupt 0000:00:02.2[C] -> Link [LUS2] -> GSI 20 (level, low) -> IRQ 209 [ 26.411444] PCI: Setting latency timer of device 0000:00:02.2 to 64 [ 26.411458] ehci_hcd 0000:00:02.2: EHCI Host Controller [ 26.411576] PCI: cache line size of 64 is not supported by device 0000:00:02.2 [ 26.412723] ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 3 [ 26.412765] ehci_hcd 0000:00:02.2: irq 209, io mem 0xe0004000 [ 26.412792] ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 26.414355] hub 3-0:1.0: USB hub found [ 26.414384] hub 3-0:1.0: 6 ports detected [ 26.424432] usb 1-1: new low speed USB device using ohci_hcd and address 2 [ 26.606193] irq 11: nobody cared (try booting with the "irqpoll" option) [ 26.606203] [ 26.606205] Call Trace: {__report_bad_irq+53} {note_interrupt+538} [ 26.606236] {:usbcore:usb_hcd_irq+42} {__do_IRQ+215} [ 26.606291] {do_IRQ+47} {ret_from_intr+0} [ 26.606311] [ 26.606326] handlers: [ 26.606331] [] (usb_hcd_irq+0x0/0x60 [usbcore]) [ 26.606363] Disabling IRQ #11 [ 26.809289] EXT3-fs: mounted filesystem with ordered data mode. [ 26.810339] kjournald starting. Commit interval 5 seconds [ 26.888005] usb 1-1: new low speed USB device using ohci_hcd and address 3 [ 42.540701] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 42.731432] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 42.839498] i2c_adapter i2c-0: nForce2 SMBus adapter at 0x2040 [ 42.839568] i2c_adapter i2c-1: nForce2 SMBus adapter at 0x2000 [ 43.106584] ACPI: PCI Interrupt Link [LACI] enabled at IRQ 22 [ 43.106595] ACPI: PCI Interrupt 0000:00:06.0[A] -> Link [LACI] -> GSI 22 (level, low) -> IRQ 193 [ 43.106941] PCI: Setting latency timer of device 0000:00:06.0 to 64 [ 43.330597] input: PS/2 Mouse as /class/input/input1 [ 43.355892] input: AlpsPS/2 ALPS GlidePoint as /class/input/input2 [ 43.668654] intel8x0_measure_ac97_clock: measured 50318 usecs [ 43.668663] intel8x0: clocking to 48000 [ 44.109213] nvidia: module license 'NVIDIA' taints kernel. [ 44.123261] ACPI: PCI Interrupt Link [LNK5] enabled at IRQ 16 [ 44.123274] GSI 21 sharing vector 0xD9 and IRQ 21 [ 44.123283] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNK5] -> GSI 16 (level, low) -> IRQ 217 [ 44.123595] NVRM: loading NVIDIA Linux x86_64 Kernel Module 1.0-8756 Wed Mar 29 15:12:41 PST 2006 [ 44.173745] ieee1394: Initialized config rom entry `ip1394' [ 44.176963] ohci1394: $Rev: 1313 $ Ben Collins [ 44.176990] ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNK1] -> GSI 19 (level, low) -> IRQ 177 [ 44.227327] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[177] MMIO=[e0108000-e01087ff] Max Packet=[2048] [ 44.234587] 8139too Fast Ethernet driver 0.9.27 [ 44.234662] ACPI: PCI Interrupt 0000:02:01.0[A] -> Link [LNK2] -> GSI 18 (level, low) -> IRQ 185 [ 44.235508] eth0: RealTek RTL8139 at 0xffffc20000070800, 00:0f:b0:4a:07:a9, IRQ 185 [ 44.235517] eth0: Identified 8139 chip type 'RTL-8101' [ 44.244953] ieee80211_crypt: registered algorithm 'NULL' [ 44.247338] ieee80211: 802.11 data/management/control stack, git-1.1.7 [ 44.247344] ieee80211: Copyright (C) 2004-2005 Intel Corporation [ 44.267937] ACPI: PCI Interrupt 0000:02:04.0[A] -> Link [LNK1] -> GSI 19 (level, low) -> IRQ 177 [ 44.267962] Yenta: CardBus bridge found at 0000:02:04.0 [103c:006d] [ 44.267988] PCI: Bus 3, cardbus bridge: 0000:02:04.0 [ 44.267994] IO window: 00003000-000030ff [ 44.268000] IO window: 00003400-000034ff [ 44.268008] PREFETCH window: 60000000-61ffffff [ 44.268016] MEM window: e0400000-e07fffff [ 44.268025] Yenta: Enabling burst memory read transactions [ 44.268032] Yenta: Using CSCINT to route CSC interrupts to PCI [ 44.268037] Yenta: Routing CardBus interrupts to PCI [ 44.268045] Yenta TI: socket 0000:02:04.0, mfunc 0x01111d22, devctl 0x64 [ 44.273041] input: PC Speaker as /class/input/input3 [ 44.298902] 8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004) [ 44.372327] bcm43xx: driver [ 44.373147] ACPI: PCI Interrupt Link [LNK3] enabled at IRQ 17 [ 44.373158] GSI 22 sharing vector 0xE1 and IRQ 22 [ 44.373167] ACPI: PCI Interrupt 0000:02:02.0[A] -> Link [LNK3] -> GSI 17 (level, low) -> IRQ 225 [ 44.500105] Yenta: ISA IRQ mask 0x04f8, PCI irq 177 [ 44.500113] Socket status: 30000086 [ 44.500119] pcmcia: parent PCI bridge I/O window: 0x3000 - 0x7fff [ 44.500127] pcmcia: parent PCI bridge Memory window: 0xe0100000 - 0xe17fffff [ 44.500135] pcmcia: parent PCI bridge Memory window: 0x60000000 - 0x63ffffff [ 44.500349] ACPI: PCI Interrupt 0000:02:04.1[B] -> Link [LNK2] -> GSI 18 (level, low) -> IRQ 185 [ 44.500373] Yenta: CardBus bridge found at 0000:02:04.1 [103c:006d] [ 44.500395] Yenta: Using CSCINT to route CSC interrupts to PCI [ 44.500400] Yenta: Routing CardBus interrupts to PCI [ 44.500408] Yenta TI: socket 0000:02:04.1, mfunc 0x01111d22, devctl 0x64 [ 44.724082] Yenta: ISA IRQ mask 0x04f8, PCI irq 185 [ 44.724091] Socket status: 30000006 [ 44.724099] pcmcia: parent PCI bridge I/O window: 0x3000 - 0x7fff [ 44.724107] pcmcia: parent PCI bridge Memory window: 0xe0100000 - 0xe17fffff [ 44.724114] pcmcia: parent PCI bridge Memory window: 0x60000000 - 0x63ffffff [ 44.917590] parport: PnPBIOS parport detected. [ 44.917627] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP] [ 44.943485] Real Time Clock Driver v1.12 [ 45.223843] ts: Compaq touchscreen protocol output [ 45.494673] ieee1394: Host added: ID:BUS[0-00:1023] GUID[523f0200523f0200] [ 46.189178] eth0: link up, 100Mbps, full-duplex, lpa 0xC5E1 [ 47.282630] NET: Registered protocol family 17 [ 48.272729] floppy0: no floppy controllers found [ 48.850692] Adding 506036k swap on /dev/hda3. Priority:-1 extents:1 across:506036k [ 49.063409] EXT3 FS on hda4, internal journal [ 49.316538] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 [ 49.316546] md: bitmap version 4.39 [ 50.026095] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel at redhat.com [ 50.838881] cdrom: open failed. [ 51.279190] NTFS driver 2.1.25 [Flags: R/O MODULE]. [ 51.627613] NTFS volume version 3.1. [ 51.974460] NET: Registered protocol family 10 [ 51.974710] lo: Disabled Privacy Extensions [ 51.975025] IPv6 over IPv4 tunneling driver [ 54.875522] ACPI: AC Adapter [ACAD] (on-line) [ 55.007064] ACPI: Battery Slot [BAT1] (battery present) [ 55.152095] ACPI: Power Button (FF) [PWRF] [ 55.152114] ACPI: Power Button (CM) [PWRB] [ 55.152125] ACPI: Lid Switch [LID] [ 55.338489] ibm_acpi: ec object not found [ 55.374951] pcc_acpi: loading... [ 55.532236] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) [ 56.183975] powernow-k8: Found 1 AMD Athlon 64 / Opteron processors (version 1.50.4) [ 56.185337] powernow-k8: 0 : fid 0xc (2000 MHz), vid 0x2 (1500 mV) [ 56.185345] powernow-k8: 1 : fid 0x8 (1600 MHz), vid 0xa (1300 mV) [ 56.185352] powernow-k8: 2 : fid 0x0 (800 MHz), vid 0x12 (1100 mV) [ 56.185362] cpu_init done, current fid 0x0, vid 0x12 [ 70.849265] eth0: no IPv6 routers present [ 82.184892] hdc: drive_cmd: status=0x51 { DriveReady SeekComplete Error } [ 82.184911] hdc: drive_cmd: error=0x04 { AbortedCommand } [ 82.184918] ide: failed opcode was: 0xec [ 82.303306] hdc: drive_cmd: status=0x51 { DriveReady SeekComplete Error } [ 82.303326] hdc: drive_cmd: error=0x04 { AbortedCommand } [ 82.303333] ide: failed opcode was: 0xec [ 83.102533] Bluetooth: Core ver 2.8 [ 83.102546] NET: Registered protocol family 31 [ 83.102551] Bluetooth: HCI device and connection manager initialized [ 83.102576] Bluetooth: HCI socket layer initialized [ 83.266883] Bluetooth: L2CAP ver 2.8 [ 83.266894] Bluetooth: L2CAP socket layer initialized -- Boot of Linux version 2.6.15-21-amd64-generic on hpzv5000 failed https://launchpad.net/bugs/42079 From wink at saville.com Sat Apr 29 15:17:36 2006 From: wink at saville.com (wink saville) Date: Sat, 29 Apr 2006 15:17:36 -0000 Subject: [Bug 42079] Boot of Linux version 2.6.15-21-amd64-generic on hpzv5000 failed References: <20060429151736.30606.44203.malonedeb@gangotri.ubuntu.com> Message-ID: <20060429151736.30606.44203.malonedeb@gangotri.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: I was booting using 2.6.15-21 and at the "Loading Hardware Drivers" message the system hung. I waited about 2 minutes and then rebooted. This time successfully execpt my mouse, a usb logitech MX500, isn't working. If a boot fails, what is the best method of capturing the messages? Here is the output of dmesg of the boot that succeeded except for the mouse: wink at hpz5:~$ cat dmesg.060429-0800.log [ 0.000000] Bootdata ok (command line is root=/dev/hda4 ro quiet splash) [ 0.000000] Linux version 2.6.15-21-amd64-generic (buildd at crested) (gcc version 4.0.3 (Ubuntu 4.0.3-1ubuntu5)) #1 SMP PREEMPT Fri Apr 21 16:42:20 UTC 2006 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000d0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000004ff70000 (usable) [ 0.000000] BIOS-e820: 000000004ff70000 - 000000004ff7f000 (ACPI data) [ 0.000000] BIOS-e820: 000000004ff7f000 - 000000004ff80000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000004ff80000 - 0000000050000000 (reserved) [ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) [ 0.000000] ACPI: RSDP (v000 PTLTD ) @ 0x00000000000f7240 [ 0.000000] ACPI: RSDT (v001 PTLTD RSDT 0x06040000 LTP 0x00000000) @ 0x000000004ff7a87e [ 0.000000] ACPI: FADT (v001 NVIDIA CK8 0x06040000 PTL_ 0x000f4240) @ 0x000000004ff7ee13 [ 0.000000] ACPI: MADT (v001 NVIDIA NV_APIC_ 0x06040000 LTP 0x00000000) @ 0x000000004ff7ee87 [ 0.000000] ACPI: BOOT (v001 PTLTD $SBFTBL$ 0x06040000 LTP 0x00000001) @ 0x000000004ff7eee1 [ 0.000000] ACPI: SSDT (v001 PTLTD POWERNOW 0x06040000 LTP 0x00000001) @ 0x000000004ff7ef09 [ 0.000000] ACPI: DSDT (v001 NVIDIA CK8 0x06040000 MSFT 0x0100000e) @ 0x0000000000000000 [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] Number of nodes 1 [ 0.000000] Node 0 MemBase 0000000000000000 Limit 000000004ff70000 [ 0.000000] Using 63 for the hash shift. [ 0.000000] Using node hash shift of 63 [ 0.000000] Bootmem setup node 0 0000000000000000-000000004ff70000 [ 0.000000] No mptable found. [ 0.000000] On node 0 totalpages: 322040 [ 0.000000] DMA zone: 3022 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 319018 pages, LIFO batch:31 [ 0.000000] Normal zone: 0 pages, LIFO batch:0 [ 0.000000] HighMem zone: 0 pages, LIFO batch:0 [ 0.000000] Nvidia board detected. Ignoring ACPI timer override. [ 0.000000] ACPI: PM-Timer IO Port: 0x8008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 15:4 APIC version 16 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: BIOS IRQ0 pin2 override ignored. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Setting APIC routing to physical flat [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 60000000 (gap: 50000000:aff80000) [ 0.000000] Checking aperture... [ 0.000000] CPU 0: aperture @ e8000000 size 128 MB [ 0.000000] SMP: Allowing 3 CPUs, 2 hotplug CPUs [ 0.000000] Built 1 zonelists [ 0.000000] Kernel command line: root=/dev/hda4 ro quiet splash [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 131072 bytes) [ 0.000000] time.c: Using 3.579545 MHz PM timer. [ 0.000000] time.c: Detected 797.954 MHz processor. [ 18.665794] Console: colour VGA+ 80x25 [ 18.668329] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 18.672252] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 18.698361] Memory: 1277896k/1310144k available (2131k kernel code, 31860k reserved, 751k data, 180k init) [ 18.758143] Calibrating delay using timer specific routine.. 1597.28 BogoMIPS (lpj=798642) [ 18.758254] Security Framework v1.0.0 initialized [ 18.758268] SELinux: Disabled at boot. [ 18.758313] Mount-cache hash table entries: 256 [ 18.758518] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 18.758525] CPU: L2 Cache: 1024K (64 bytes/line) [ 18.758531] CPU 0(1) -> Node 0 -> Core 0 [ 18.758546] mtrr: v2.0 (20020519) [ 18.758561] SMP alternatives: switching to UP code [ 18.759094] checking if image is initramfs... it is [ 20.107470] Freeing initrd memory: 6877k freed [ 20.116454] ACPI: Looking for DSDT ... not found! [ 20.151418] Using local APIC timer interrupts. [ 20.276718] Detected 12.468 MHz APIC timer. [ 20.276811] Brought up 1 CPUs [ 20.276849] time.c: Using PIT/TSC based timekeeping. [ 20.276854] testing NMI watchdog ... OK. [ 20.287399] NET: Registered protocol family 16 [ 20.287442] ACPI: bus type pci registered [ 20.287453] PCI: Using configuration type 1 [ 20.288417] ACPI: Subsystem revision 20051216 [ 20.291852] ACPI: Interpreter enabled [ 20.291857] ACPI: Using IOAPIC for interrupt routing [ 20.292633] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 20.292640] PCI: Probing PCI hardware (bus 00) [ 20.320946] Boot video device is 0000:01:00.0 [ 20.321030] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 20.357294] ACPI: Embedded Controller [EC0] (gpe 33) interrupt mode. [ 20.404342] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P0._PRT] [ 20.404908] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP0._PRT] [ 20.406343] ACPI: PCI Interrupt Link [LNK1] (IRQs 16 18 19) *0 [ 20.407133] ACPI: PCI Interrupt Link [LNK2] (IRQs 16 18 19) *0 [ 20.407911] ACPI: PCI Interrupt Link [LNK3] (IRQs 17) *0 [ 20.408687] ACPI: PCI Interrupt Link [LNK4] (IRQs 16 18 19) *0, disabled. [ 20.409464] ACPI: PCI Interrupt Link [LNK5] (IRQs 16 18 19) *0 [ 20.410231] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22) *0 [ 20.411002] ACPI: PCI Interrupt Link [LUS0] (IRQs 20 21 22) *0 [ 20.411779] ACPI: PCI Interrupt Link [LUS1] (IRQs 20 21 22) *0 [ 20.412542] ACPI: PCI Interrupt Link [LUS2] (IRQs 20 21 22) *0 [ 20.413307] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22) *0, disabled. [ 20.414074] ACPI: PCI Interrupt Link [LACI] (IRQs 20 21 22) *0 [ 20.414846] ACPI: PCI Interrupt Link [LMCI] (IRQs 20 21 22) *0 [ 20.415611] ACPI: PCI Interrupt Link [LPID] (IRQs 20 21 22) *0, disabled. [ 20.416393] ACPI: PCI Interrupt Link [LTID] (IRQs 20 21 22) *0, disabled. [ 20.416645] Linux Plug and Play Support v0.97 (c) Adam Belay [ 20.416661] pnp: PnP ACPI init [ 20.444262] pnp: PnP ACPI: found 12 devices [ 20.444288] PCI: Using ACPI for IRQ routing [ 20.444295] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 20.444448] agpgart: Detected AGP bridge 0 [ 20.444460] agpgart: Setting up Nforce3 AGP. [ 20.451904] agpgart: AGP aperture is 128M @ 0xe8000000 [ 20.451934] PCI-DMA: Disabling IOMMU. [ 20.452918] pnp: 00:00: ioport range 0x8000-0x807f could not be reserved [ 20.452927] pnp: 00:00: ioport range 0x8080-0x80ff has been reserved [ 20.452934] pnp: 00:00: ioport range 0x8400-0x847f has been reserved [ 20.452942] pnp: 00:00: ioport range 0x8480-0x84ff could not be reserved [ 20.452949] pnp: 00:00: ioport range 0x8800-0x887f has been reserved [ 20.452956] pnp: 00:00: ioport range 0x8880-0x88ff has been reserved [ 20.452963] pnp: 00:00: ioport range 0x2040-0x207f has been reserved [ 20.452970] pnp: 00:00: ioport range 0x2000-0x203f has been reserved [ 20.453356] PCI: Failed to allocate mem resource #10:2000000 at e2000000 for 0000:02:04.0 [ 20.453415] PCI: Failed to allocate mem resource #10:2000000 at e2000000 for 0000:02:04.1 [ 20.453469] PCI: Bus 3, cardbus bridge: 0000:02:04.0 [ 20.453475] IO window: 00003000-000030ff [ 20.453488] IO window: 00003400-000034ff [ 20.453496] PREFETCH window: 60000000-61ffffff [ 20.453503] PCI: Bus 7, cardbus bridge: 0000:02:04.1 [ 20.453508] IO window: 00003800-000038ff [ 20.453514] IO window: 00003c00-00003cff [ 20.453522] PREFETCH window: 62000000-63ffffff [ 20.453528] PCI: Bridge: 0000:00:0a.0 [ 20.453534] IO window: 3000-7fff [ 20.453541] MEM window: e0100000-e17fffff [ 20.453548] PREFETCH window: 60000000-63ffffff [ 20.453556] PCI: Bridge: 0000:00:0b.0 [ 20.453560] IO window: disabled. [ 20.453568] MEM window: e2000000-e2ffffff [ 20.453576] PREFETCH window: f0000000-f80fffff [ 20.453591] PCI: Setting latency timer of device 0000:00:0a.0 to 64 [ 20.454219] ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 19 [ 20.454229] GSI 16 sharing vector 0xB1 and IRQ 16 [ 20.454237] ACPI: PCI Interrupt 0000:02:04.0[A] -> Link [LNK1] -> GSI 19 (level, low) -> IRQ 177 [ 20.454844] ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 18 [ 20.454851] GSI 17 sharing vector 0xB9 and IRQ 17 [ 20.454858] ACPI: PCI Interrupt 0000:02:04.1[B] -> Link [LNK2] -> GSI 18 (level, low) -> IRQ 185 [ 20.455088] Simple Boot Flag at 0x37 set to 0x1 [ 20.455352] IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $ [ 20.455954] audit: initializing netlink socket (disabled) [ 20.455974] audit(1146322095.791:1): initialized [ 20.456213] VFS: Disk quotas dquot_6.5.1 [ 20.456245] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 20.456335] Initializing Cryptographic API [ 20.456343] io scheduler noop registered [ 20.456359] io scheduler anticipatory registered [ 20.456372] io scheduler deadline registered [ 20.456402] io scheduler cfq registered [ 20.485214] Linux agpgart interface v0.101 (c) Dave Jones [ 20.485383] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 20.492413] i8042.c: Detected active multiplexing controller, rev 1.1. [ 20.498670] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 20.499366] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 20.500343] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 20.501218] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 20.502243] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 20.502251] Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled [ 20.506708] ACPI: PCI Interrupt Link [LMCI] enabled at IRQ 22 [ 20.506718] GSI 18 sharing vector 0xC1 and IRQ 18 [ 20.506727] ACPI: PCI Interrupt 0000:00:06.1[B] -> Link [LMCI] -> GSI 22 (level, low) -> IRQ 193 [ 20.506742] ACPI: PCI interrupt for device 0000:00:06.1 disabled [ 20.507486] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 20.507572] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 20.507579] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 20.507810] mice: PS/2 mouse device common for all mice [ 20.507959] NET: Registered protocol family 2 [ 20.520678] IP route cache hash table entries: 65536 (order: 7, 524288 bytes) [ 20.521566] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 20.528648] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 20.529816] TCP: Hash tables configured (established 262144 bind 65536) [ 20.529823] TCP reno registered [ 20.529993] TCP bic registered [ 20.530008] NET: Registered protocol family 1 [ 20.530020] NET: Registered protocol family 8 [ 20.530025] NET: Registered protocol family 20 [ 20.530264] ACPI wakeup devices: [ 20.530269] USB0 USB1 USB2 PS2K PS2M MAC0 [ 20.530277] ACPI: (supports S0 S3 S4 S5) [ 20.530395] Freeing unused kernel memory: 180k freed [ 20.572803] input: AT Translated Set 2 keyboard as /class/input/input0 [ 20.642381] vga16fb: initializing [ 20.642390] vga16fb: mapped to 0xffff8100000a0000 [ 20.825446] Console: switching to colour frame buffer device 80x25 [ 20.825457] fb0: VGA16 VGA frame buffer device [ 22.009210] Capability LSM initialized [ 22.068621] ACPI: CPU0 (power states: C1[C1] C2[C2]) [ 22.080648] ACPI: Thermal Zone [THRM] (29 C) [ 23.058173] SCSI subsystem initialized [ 23.061176] libata version 1.20 loaded. [ 23.067278] NFORCE3-150: IDE controller at PCI slot 0000:00:08.0 [ 23.067309] NFORCE3-150: chipset revision 165 [ 23.067313] NFORCE3-150: not 100% native mode: will probe irqs later [ 23.067322] NFORCE3-150: BIOS didn't set cable bits correctly. Enabling workaround. [ 23.067331] NFORCE3-150: 0000:00:08.0 (rev a5) UDMA133 controller [ 23.067347] ide0: BM-DMA at 0x2080-0x2087, BIOS settings: hda:DMA, hdb:pio [ 23.067365] ide1: BM-DMA at 0x2088-0x208f, BIOS settings: hdc:DMA, hdd:pio [ 23.067380] Probing IDE interface ide0... [ 23.330464] hda: TOSHIBA MK8025GAS, ATA DISK drive [ 23.942260] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 23.992423] Probing IDE interface ide1... [ 24.663944] hdc: HL-DT-ST DVD-RW GWA-4080N, ATAPI CD/DVD-ROM drive [ 24.971112] ide1 at 0x170-0x177,0x376 on irq 15 [ 24.988018] hda: max request size: 128KiB [ 25.001427] hda: 156301488 sectors (80026 MB), CHS=65535/16/63, UDMA(100) [ 25.001499] hda: cache flushes supported [ 25.001777] hda: hda1 hda2 hda3 hda4 [ 25.093301] hdc: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, DMA [ 25.093317] Uniform CD-ROM driver Revision: 3.20 [ 25.626050] usbcore: registered new driver usbfs [ 25.626625] usbcore: registered new driver hub [ 25.629429] ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) [ 25.630040] PCI: Enabling device 0000:00:02.0 (0004 -> 0006) [ 25.630159] ACPI: PCI Interrupt 0000:00:02.0[P]: no GSI - using IRQ 11 [ 25.630717] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 25.630728] ohci_hcd 0000:00:02.0: OHCI Host Controller [ 25.873789] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1 [ 25.873815] ohci_hcd 0000:00:02.0: irq 11, io mem 0xe0000000 [ 25.928062] hub 1-0:1.0: USB hub found [ 25.928097] hub 1-0:1.0: 3 ports detected [ 26.029349] PCI: Enabling device 0000:00:02.1 (0004 -> 0006) [ 26.031346] ACPI: PCI Interrupt Link [LUS1] enabled at IRQ 21 [ 26.031364] GSI 19 sharing vector 0xC9 and IRQ 19 [ 26.031378] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LUS1] -> GSI 21 (level, low) -> IRQ 201 [ 26.031746] PCI: Setting latency timer of device 0000:00:02.1 to 64 [ 26.031760] ohci_hcd 0000:00:02.1: OHCI Host Controller [ 26.245492] ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2 [ 26.245534] ohci_hcd 0000:00:02.1: irq 201, io mem 0xe0001000 [ 26.299974] hub 2-0:1.0: USB hub found [ 26.300003] hub 2-0:1.0: 3 ports detected [ 26.410878] ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 20 [ 26.410898] GSI 20 sharing vector 0xD1 and IRQ 20 [ 26.410913] ACPI: PCI Interrupt 0000:00:02.2[C] -> Link [LUS2] -> GSI 20 (level, low) -> IRQ 209 [ 26.411444] PCI: Setting latency timer of device 0000:00:02.2 to 64 [ 26.411458] ehci_hcd 0000:00:02.2: EHCI Host Controller [ 26.411576] PCI: cache line size of 64 is not supported by device 0000:00:02.2 [ 26.412723] ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 3 [ 26.412765] ehci_hcd 0000:00:02.2: irq 209, io mem 0xe0004000 [ 26.412792] ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 26.414355] hub 3-0:1.0: USB hub found [ 26.414384] hub 3-0:1.0: 6 ports detected [ 26.424432] usb 1-1: new low speed USB device using ohci_hcd and address 2 [ 26.606193] irq 11: nobody cared (try booting with the "irqpoll" option) [ 26.606203] [ 26.606205] Call Trace: {__report_bad_irq+53} {note_interrupt+538} [ 26.606236] {:usbcore:usb_hcd_irq+42} {__do_IRQ+215} [ 26.606291] {do_IRQ+47} {ret_from_intr+0} [ 26.606311] [ 26.606326] handlers: [ 26.606331] [] (usb_hcd_irq+0x0/0x60 [usbcore]) [ 26.606363] Disabling IRQ #11 [ 26.809289] EXT3-fs: mounted filesystem with ordered data mode. [ 26.810339] kjournald starting. Commit interval 5 seconds [ 26.888005] usb 1-1: new low speed USB device using ohci_hcd and address 3 [ 42.540701] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 42.731432] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 42.839498] i2c_adapter i2c-0: nForce2 SMBus adapter at 0x2040 [ 42.839568] i2c_adapter i2c-1: nForce2 SMBus adapter at 0x2000 [ 43.106584] ACPI: PCI Interrupt Link [LACI] enabled at IRQ 22 [ 43.106595] ACPI: PCI Interrupt 0000:00:06.0[A] -> Link [LACI] -> GSI 22 (level, low) -> IRQ 193 [ 43.106941] PCI: Setting latency timer of device 0000:00:06.0 to 64 [ 43.330597] input: PS/2 Mouse as /class/input/input1 [ 43.355892] input: AlpsPS/2 ALPS GlidePoint as /class/input/input2 [ 43.668654] intel8x0_measure_ac97_clock: measured 50318 usecs [ 43.668663] intel8x0: clocking to 48000 [ 44.109213] nvidia: module license 'NVIDIA' taints kernel. [ 44.123261] ACPI: PCI Interrupt Link [LNK5] enabled at IRQ 16 [ 44.123274] GSI 21 sharing vector 0xD9 and IRQ 21 [ 44.123283] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNK5] -> GSI 16 (level, low) -> IRQ 217 [ 44.123595] NVRM: loading NVIDIA Linux x86_64 Kernel Module 1.0-8756 Wed Mar 29 15:12:41 PST 2006 [ 44.173745] ieee1394: Initialized config rom entry `ip1394' [ 44.176963] ohci1394: $Rev: 1313 $ Ben Collins [ 44.176990] ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNK1] -> GSI 19 (level, low) -> IRQ 177 [ 44.227327] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[177] MMIO=[e0108000-e01087ff] Max Packet=[2048] [ 44.234587] 8139too Fast Ethernet driver 0.9.27 [ 44.234662] ACPI: PCI Interrupt 0000:02:01.0[A] -> Link [LNK2] -> GSI 18 (level, low) -> IRQ 185 [ 44.235508] eth0: RealTek RTL8139 at 0xffffc20000070800, 00:0f:b0:4a:07:a9, IRQ 185 [ 44.235517] eth0: Identified 8139 chip type 'RTL-8101' [ 44.244953] ieee80211_crypt: registered algorithm 'NULL' [ 44.247338] ieee80211: 802.11 data/management/control stack, git-1.1.7 [ 44.247344] ieee80211: Copyright (C) 2004-2005 Intel Corporation [ 44.267937] ACPI: PCI Interrupt 0000:02:04.0[A] -> Link [LNK1] -> GSI 19 (level, low) -> IRQ 177 [ 44.267962] Yenta: CardBus bridge found at 0000:02:04.0 [103c:006d] [ 44.267988] PCI: Bus 3, cardbus bridge: 0000:02:04.0 [ 44.267994] IO window: 00003000-000030ff [ 44.268000] IO window: 00003400-000034ff [ 44.268008] PREFETCH window: 60000000-61ffffff [ 44.268016] MEM window: e0400000-e07fffff [ 44.268025] Yenta: Enabling burst memory read transactions [ 44.268032] Yenta: Using CSCINT to route CSC interrupts to PCI [ 44.268037] Yenta: Routing CardBus interrupts to PCI [ 44.268045] Yenta TI: socket 0000:02:04.0, mfunc 0x01111d22, devctl 0x64 [ 44.273041] input: PC Speaker as /class/input/input3 [ 44.298902] 8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004) [ 44.372327] bcm43xx: driver [ 44.373147] ACPI: PCI Interrupt Link [LNK3] enabled at IRQ 17 [ 44.373158] GSI 22 sharing vector 0xE1 and IRQ 22 [ 44.373167] ACPI: PCI Interrupt 0000:02:02.0[A] -> Link [LNK3] -> GSI 17 (level, low) -> IRQ 225 [ 44.500105] Yenta: ISA IRQ mask 0x04f8, PCI irq 177 [ 44.500113] Socket status: 30000086 [ 44.500119] pcmcia: parent PCI bridge I/O window: 0x3000 - 0x7fff [ 44.500127] pcmcia: parent PCI bridge Memory window: 0xe0100000 - 0xe17fffff [ 44.500135] pcmcia: parent PCI bridge Memory window: 0x60000000 - 0x63ffffff [ 44.500349] ACPI: PCI Interrupt 0000:02:04.1[B] -> Link [LNK2] -> GSI 18 (level, low) -> IRQ 185 [ 44.500373] Yenta: CardBus bridge found at 0000:02:04.1 [103c:006d] [ 44.500395] Yenta: Using CSCINT to route CSC interrupts to PCI [ 44.500400] Yenta: Routing CardBus interrupts to PCI [ 44.500408] Yenta TI: socket 0000:02:04.1, mfunc 0x01111d22, devctl 0x64 [ 44.724082] Yenta: ISA IRQ mask 0x04f8, PCI irq 185 [ 44.724091] Socket status: 30000006 [ 44.724099] pcmcia: parent PCI bridge I/O window: 0x3000 - 0x7fff [ 44.724107] pcmcia: parent PCI bridge Memory window: 0xe0100000 - 0xe17fffff [ 44.724114] pcmcia: parent PCI bridge Memory window: 0x60000000 - 0x63ffffff [ 44.917590] parport: PnPBIOS parport detected. [ 44.917627] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP] [ 44.943485] Real Time Clock Driver v1.12 [ 45.223843] ts: Compaq touchscreen protocol output [ 45.494673] ieee1394: Host added: ID:BUS[0-00:1023] GUID[523f0200523f0200] [ 46.189178] eth0: link up, 100Mbps, full-duplex, lpa 0xC5E1 [ 47.282630] NET: Registered protocol family 17 [ 48.272729] floppy0: no floppy controllers found [ 48.850692] Adding 506036k swap on /dev/hda3. Priority:-1 extents:1 across:506036k [ 49.063409] EXT3 FS on hda4, internal journal [ 49.316538] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 [ 49.316546] md: bitmap version 4.39 [ 50.026095] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel at redhat.com [ 50.838881] cdrom: open failed. [ 51.279190] NTFS driver 2.1.25 [Flags: R/O MODULE]. [ 51.627613] NTFS volume version 3.1. [ 51.974460] NET: Registered protocol family 10 [ 51.974710] lo: Disabled Privacy Extensions [ 51.975025] IPv6 over IPv4 tunneling driver [ 54.875522] ACPI: AC Adapter [ACAD] (on-line) [ 55.007064] ACPI: Battery Slot [BAT1] (battery present) [ 55.152095] ACPI: Power Button (FF) [PWRF] [ 55.152114] ACPI: Power Button (CM) [PWRB] [ 55.152125] ACPI: Lid Switch [LID] [ 55.338489] ibm_acpi: ec object not found [ 55.374951] pcc_acpi: loading... [ 55.532236] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) [ 56.183975] powernow-k8: Found 1 AMD Athlon 64 / Opteron processors (version 1.50.4) [ 56.185337] powernow-k8: 0 : fid 0xc (2000 MHz), vid 0x2 (1500 mV) [ 56.185345] powernow-k8: 1 : fid 0x8 (1600 MHz), vid 0xa (1300 mV) [ 56.185352] powernow-k8: 2 : fid 0x0 (800 MHz), vid 0x12 (1100 mV) [ 56.185362] cpu_init done, current fid 0x0, vid 0x12 [ 70.849265] eth0: no IPv6 routers present [ 82.184892] hdc: drive_cmd: status=0x51 { DriveReady SeekComplete Error } [ 82.184911] hdc: drive_cmd: error=0x04 { AbortedCommand } [ 82.184918] ide: failed opcode was: 0xec [ 82.303306] hdc: drive_cmd: status=0x51 { DriveReady SeekComplete Error } [ 82.303326] hdc: drive_cmd: error=0x04 { AbortedCommand } [ 82.303333] ide: failed opcode was: 0xec [ 83.102533] Bluetooth: Core ver 2.8 [ 83.102546] NET: Registered protocol family 31 [ 83.102551] Bluetooth: HCI device and connection manager initialized [ 83.102576] Bluetooth: HCI socket layer initialized [ 83.266883] Bluetooth: L2CAP ver 2.8 [ 83.266894] Bluetooth: L2CAP socket layer initialized -- Boot of Linux version 2.6.15-21-amd64-generic on hpzv5000 failed https://launchpad.net/bugs/42079 From samtygier at yahoo.co.uk Sat Apr 29 15:20:52 2006 From: samtygier at yahoo.co.uk (sam tygier) Date: Sat, 29 Apr 2006 15:20:52 -0000 Subject: [Bug 42079] Re: Boot of Linux version 2.6.15-21-amd64-generic on hpzv5000 failed References: <20060429151736.30606.44203.malonedeb@gangotri.ubuntu.com> Message-ID: <20060429152052.16712.51714.launchpad@gandwana.ubuntu.com> ** Changed in: Ubuntu Sourcepackagename: None => linux-source-2.6.15 -- Boot of Linux version 2.6.15-21-amd64-generic on hpzv5000 failed https://launchpad.net/bugs/42079 From wink at saville.com Sat Apr 29 15:21:44 2006 From: wink at saville.com (wink saville) Date: Sat, 29 Apr 2006 15:21:44 -0000 Subject: [Bug 42079] Re: Boot of Linux version 2.6.15-21-amd64-generic on hpzv5000 failed References: <20060429151736.30606.44203.malonedeb@gangotri.ubuntu.com> Message-ID: <20060429152144.30606.35885.malone@gangotri.ubuntu.com> I forgot to mention, this is Ubuntu 6.06 Beta updated Apr 28, 2006. -- Boot of Linux version 2.6.15-21-amd64-generic on hpzv5000 failed https://launchpad.net/bugs/42079 From rob.mcmeekin at gmail.com Sat Apr 29 15:32:33 2006 From: rob.mcmeekin at gmail.com (Robert McMeekin) Date: Sat, 29 Apr 2006 15:32:33 -0000 Subject: [Bug 42060] Re: Atheros wifi cards appear not to be working in 2.6.25-21 References: <44530682.2070000@canonical.com> Message-ID: <20060429153233.30606.16109.malone@gangotri.ubuntu.com> This is problem not the answer to your problem, and the package system probably doesn't allow this to happen, but one thing that could cause that error was if your linux-restricted-modules package was not compiled the kernel version you're running. -- Atheros wifi cards appear not to be working in 2.6.25-21 https://launchpad.net/bugs/42060 From rob.mcmeekin at gmail.com Sat Apr 29 15:43:58 2006 From: rob.mcmeekin at gmail.com (Robert McMeekin) Date: Sat, 29 Apr 2006 15:43:58 -0000 Subject: [Bug 42060] Re: Atheros wifi cards appear not to be working in 2.6.25-21 References: <44530682.2070000@canonical.com> Message-ID: <20060429154358.16712.75738.malone@gandwana.ubuntu.com> BTW, my atheros card (D-Link AirPlusG DWL-G630) works fine with 2.6.15-21-686 -- Atheros wifi cards appear not to be working in 2.6.25-21 https://launchpad.net/bugs/42060 From ubuntu at paul.sladen.org Sat Apr 29 16:07:51 2006 From: ubuntu at paul.sladen.org (Paul Sladen) Date: Sat, 29 Apr 2006 16:07:51 -0000 Subject: [Bug 33531] Re: IPW3945 driver support References: <20060303102711.22115.46177.malonedeb@gandwana.ubuntu.com> Message-ID: <20060429160751.30638.65558.malone@gangotri.ubuntu.com> *** This bug is a duplicate of bug 35215 *** linux-source-2.6.15 (2.6.15-21.31) dapper; urgency=low Changes by Ben Collins * ieee80211_1_1_13: Slightly munged ieee80211 1.1.13 stack for use with ipw3945. * ipw3945: New driver. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Unconfirmed => Fix Released -- IPW3945 driver support https://launchpad.net/bugs/33531 From wink at saville.com Sat Apr 29 16:11:43 2006 From: wink at saville.com (wink saville) Date: Sat, 29 Apr 2006 16:11:43 -0000 Subject: [Bug 42067] Re: not working on Broadcom Corporation BCM4306 802.11b/g Wireless LAN Controller (rev 03) References: <20060429142209.16712.73035.malonedeb@gandwana.ubuntu.com> Message-ID: <20060429161143.30638.53875.malone@gangotri.ubuntu.com> Tom,\ I also have a hpzv5000 and in breezy I wasn't able to get wpa working, did you ever try wpa? BTW: I've reported a problem booting and also my mouse isn't being recognized sometimes. The mouse works fine on another laptop also running 6.06 beta but that one is i386 not x86_64. Any problems like that? Regards, Wink Saville -- not working on Broadcom Corporation BCM4306 802.11b/g Wireless LAN Controller (rev 03) https://launchpad.net/bugs/42067 From mthaddon at yahoo.com Sat Apr 29 16:33:39 2006 From: mthaddon at yahoo.com (Tom Haddon) Date: Sat, 29 Apr 2006 16:33:39 -0000 Subject: [Bug 42067] Re: [Bug 42067] Re: not working on Broadcom Corporation BCM4306 802.11b/g Wireless LAN Controller (rev 03) References: <20060429142209.16712.73035.malonedeb@gandwana.ubuntu.com> <20060429161143.30638.53875.malone@gangotri.ubuntu.com> Message-ID: <1146328419.14338.1.camel@localhost.localdomain> I never tried WPA, but WEP always worked fine. I don't have any other hardware problems, but am running i386, not AMD64. I tried AMD64 in Hoary but reverted to i386 as I didn't want to muck around with chroots so much... Thanks, Tom On Sat, 2006-04-29 at 16:11 +0000, wink saville wrote: > Tom,\ > > I also have a hpzv5000 and in breezy I wasn't able to get wpa working, did you ever try wpa? > > BTW: I've reported a problem booting and also my mouse isn't being recognized sometimes. The mouse works fine on another laptop also running 6.06 beta but that one is i386 not x86_64. Any problems like that? > > Regards, > > Wink Saville > Tom Haddon mailto:mthaddon at yahoo.com You will hear good news from one you thought unfriendly to you. ----------------- Random quotes courtesy of fortune. -- not working on Broadcom Corporation BCM4306 802.11b/g Wireless LAN Controller (rev 03) https://launchpad.net/bugs/42067 From lakin.wecker at gmail.com Sat Apr 29 17:02:16 2006 From: lakin.wecker at gmail.com (Lakin Wecker) Date: Sat, 29 Apr 2006 17:02:16 -0000 Subject: [Bug 23346] Re: Detection of Lacie USB2 harddrive fails References: <20060113142313.21012.12256.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060429170217.30638.60990.launchpad@gangotri.ubuntu.com> ** Bug 18877 has been marked a duplicate of this bug -- Detection of Lacie USB2 harddrive fails https://launchpad.net/bugs/23346 From lakin.wecker at gmail.com Sat Apr 29 17:02:48 2006 From: lakin.wecker at gmail.com (Lakin Wecker) Date: Sat, 29 Apr 2006 17:02:48 -0000 Subject: [Bug 18877] Re: USB External Hard Drive Fails To Mount References: <20060113135837.21012.9345.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060429170249.30606.14886.malone@gangotri.ubuntu.com> *** This bug is a duplicate of bug 23346 *** As per the previous comment, this does seem to be a duplicate bug. Please direct further information to that bug report. ** This bug has been marked a duplicate of bug 23346 Detection of Lacie USB2 harddrive fails ** Changed in: Ubuntu Status: Unconfirmed => Rejected -- USB External Hard Drive Fails To Mount https://launchpad.net/bugs/18877 From lemsx1 at gmail.com Sat Apr 29 18:17:28 2006 From: lemsx1 at gmail.com (LuisM) Date: Sat, 29 Apr 2006 18:17:28 -0000 Subject: [Bug 41209] Re: kernel oops after 2 hours References: <20060425010752.13024.56851.malonedeb@gandwana.ubuntu.com> Message-ID: <20060429181728.16712.20744.malone@gandwana.ubuntu.com> Just to expand this ... I got the nvidia drivers from nvidia.com and the latest kernel sources from kernel.org used make-kpkg.sh to create a new kernel (make-kpkg.sh is a front-end to make-kpkg: http://lems.kiskeyix.org/toolbox/?f=make-kpkg.sh) after that, the system hasn't hang/hiccup/crashed ever. evertying is rock solid. -- kernel oops after 2 hours https://launchpad.net/bugs/41209 From callipeo at libero.it Sat Apr 29 18:38:01 2006 From: callipeo at libero.it (=?utf-8?q?Francesco_Accattap=C3=A0?=) Date: Sat, 29 Apr 2006 18:38:01 -0000 Subject: [Bug 41963] Re: Audio problem on iBook G4 References: <20060428202440.28955.79886.malonedeb@gandwana.ubuntu.com> Message-ID: <20060429183801.16739.51280.malone@gandwana.ubuntu.com> After today's upgrade the problem seems to be gone away. Could this be related to the gstreamer0.10-alsa upgrade from version 0.10.5-0ubuntu3 to version 0.10.6-0ubuntu1? -- Audio problem on iBook G4 https://launchpad.net/bugs/41963 From info at doeweling.com Sat Apr 29 18:51:19 2006 From: info at doeweling.com (ember) Date: Sat, 29 Apr 2006 18:51:19 -0000 Subject: [Bug 36667] Re: Dapper Beta: Boot process stalls on "Mounting root filesystem..." References: <20060326030146.20514.59826.malonedeb@gangotri.ubuntu.com> Message-ID: <20060429185119.30606.89546.malone@gangotri.ubuntu.com> I tried Dapper Beta 1 and Beta 2 and I have the same problem except for I do not even get error messages. The system just hangs at mounting root filesystem or, if I start withouth splash, it loads the ramdisk, but fails to load the kernel. -- Dapper Beta: Boot process stalls on "Mounting root filesystem..." https://launchpad.net/bugs/36667 From lemu_man at tiscali.fr Sat Apr 29 19:10:55 2006 From: lemu_man at tiscali.fr (pomalin) Date: Sat, 29 Apr 2006 19:10:55 -0000 Subject: [Bug 30698] powernow-k7 does not work linux-image-*-k7 (does with plain -386 kernel) References: <20060207004559.11709.54161.malonedeb@gandwana.ubuntu.com> Message-ID: <20060429191055.16739.29064.launchpad@canonical@gandwana.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 powernowd (Ubuntu) Severity: Normal Priority: (none set) Status: Needs Info Description: With the kernel 386 on my amd athlon the cpu scaling work good with powernowd, but with kernel-K7, it don't work, I'm unable to modprobe powernow-K7 but powernowd is running. -- powernow-k7 does not work linux-image-*-k7 (does with plain -386 kernel) https://launchpad.net/bugs/30698 From ubuntu at paul.sladen.org Sat Apr 29 19:10:54 2006 From: ubuntu at paul.sladen.org (Paul Sladen) Date: Sat, 29 Apr 2006 19:10:54 -0000 Subject: [Bug 30698] Re: powernow-k7 does not work linux-image-*-k7 (does with plain -386 kernel) References: <20060207004559.11709.54161.malonedeb@gandwana.ubuntu.com> Message-ID: <20060429191054.16739.47081.malone@gandwana.ubuntu.com> If wonder if something cpufreq-related is not enabled in the -k7 build .config? ** Summary changed: - kernel-K7 powernow-k7 and cpu scaling not working + powernow-k7 does not work linux-image-*-k7 (does with plain -386 kernel) ** Changed in: powernowd (Ubuntu) Sourcepackagename: powernowd => linux-source-2.6.15 ** Changed in: linux-source-2.6.15 powernowd (Ubuntu) Binarypackagename: powernowd => None -- powernow-k7 does not work linux-image-*-k7 (does with plain -386 kernel) https://launchpad.net/bugs/30698 From samtygier at yahoo.co.uk Sat Apr 29 19:53:20 2006 From: samtygier at yahoo.co.uk (sam tygier) Date: Sat, 29 Apr 2006 19:53:20 -0000 Subject: [Bug 41963] Re: Audio problem on iBook G4 References: <20060428202440.28955.79886.malonedeb@gandwana.ubuntu.com> Message-ID: <20060429195320.16739.27173.malone@gandwana.ubuntu.com> thats good to know. i am going to mark it fixed. if the problem reoccurs feel free to reopen the bug report. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Unconfirmed => Fix Released -- Audio problem on iBook G4 https://launchpad.net/bugs/41963 From gislio at gmail.com Sat Apr 29 19:58:42 2006 From: gislio at gmail.com (Gisli Ottarsson) Date: Sat, 29 Apr 2006 19:58:42 -0000 Subject: [Bug 6367] Re: Wrong IDE enumeration with multiple IDE controllers References: <20060102180911.29335.17628.malonedeb@gangotri.ubuntu.com> Message-ID: <20060429195843.16739.53098.malone@gandwana.ubuntu.com> In Bug #40993 I have outlined similar problems which I have been having with a system which has two active IDE controllers. These problems surfaced with the installation (from scratch and from a dist-upgrade) from 5.10 to 6.06. I will not repeat the details of my findings here. Suffice it to say that the order of the controllers (and consequently the naming of the disks attached to the two controllers) changes between installation and first boot. My only recourse has been to connect all disks to the same controller. On a possibly related note, the RAID partitions defined on the four disks also change names. The device called /dev/md1 during installation becomes /dev/md0 at first boot. Thanks for your attention Gisli -- Wrong IDE enumeration with multiple IDE controllers https://launchpad.net/bugs/6367 From euphaar at gmail.com Sat Apr 29 20:05:46 2006 From: euphaar at gmail.com (Uphaar Agrawalla) Date: Sat, 29 Apr 2006 20:05:46 -0000 Subject: [Bug 34209] Re: 2.6.15-17-k7 doesn't boot on Athlon 2000+ References: <20060309134308.29403.37559.malonedeb@gangotri.ubuntu.com> Message-ID: <20060429200546.30638.46497.malone@gangotri.ubuntu.com> Similar issue - I also get a bad CRC error for my hard disk partition when booting with the k7 kernel. However, the 386 kernel works just fine. I tried removing the k7 kernel completely and reinstalling it, but got a "depmod failed" like error in synaptic. -- 2.6.15-17-k7 doesn't boot on Athlon 2000+ https://launchpad.net/bugs/34209 From lathiat at bur.st Sat Apr 29 21:24:05 2006 From: lathiat at bur.st (Trent Lloyd) Date: Sat, 29 Apr 2006 21:24:05 -0000 Subject: [Bug 42132] Logitech Quickcam IM (SPCA5xx) not working [breezy-dapper regression] References: <20060429212405.16712.58583.malonedeb@gandwana.ubuntu.com> Message-ID: <20060429212405.16712.58583.malonedeb@gandwana.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: I have a Logitech Quickcam IM, it is a USB camera, which makes use of the spca5xx driver. In breezy, on this machien and with this camera, it worked fine, in dapper, beta2+updates til 30/4/06, it does not Appropriate error messages in dmesg [4295856.375000] usb 2-10: new full speed USB device using ohci_hcd and address 7 [4295856.515000] drivers/usb/media/spca5xx/spca5xx-main.c: USB SPCA5XX camera found. Logitech QC IM [4295864.703000] drivers/usb/media/spca5xx/spca5xx-main.c: init isoc: usb_submit_urb(0) ret -28 [4295875.554000] ohci_hcd 0000:00:02.0: leak ed f7883700 (#81) state 2 [4295876.610000] drivers/usb/media/spca5xx/spca5xx-main.c: init isoc: usb_submit_urb(0) ret -28 I obtained the latest spca5xx driver from its homepage and it showsup the following errors: [4303841.029000] /home/lathiat/Desktop/spca5xx-20060402/drivers/usb/spca5xx.c: spca5xx driver 00.57.11 registered [4303872.991000] /home/lathiat/Desktop/spca5xx-20060402/drivers/usb/spca5xx.c: init isoc: usb_submit_urb(0) ret -28 [4303872.991000] /home/lathiat/Desktop/spca5xx-20060402/drivers/usb/spca5xx.c: [spca5xx_open:3920] DEALLOC error on init_Isoc [4303872.991000] [4303874.600000] ohci_hcd 0000:00:02.0: leak ed f7883780 (#81) state 2 [4303875.254000] /home/lathiat/Desktop/spca5xx-20060402/drivers/usb/spca5xx.c: init isoc: usb_submit_urb(0) ret -28 [4303875.254000] /home/lathiat/Desktop/spca5xx-20060402/drivers/usb/spca5xx.c: [spca5xx_open:3920] DEALLOC error on init_Isoc [4303875.254000] -- Logitech Quickcam IM (SPCA5xx) not working [breezy-dapper regression] https://launchpad.net/bugs/42132 From zulcss at gmail.com Sat Apr 29 21:28:24 2006 From: zulcss at gmail.com (ChuckShort) Date: Sat, 29 Apr 2006 21:28:24 -0000 Subject: [Bug 41917] Re: kernel panic whith mplayer and the Option VideoOverlay is on in xorg.conf References: <20060428152937.28955.66281.malonedeb@gandwana.ubuntu.com> Message-ID: <20060429212824.30606.71555.malone@gangotri.ubuntu.com> What video driver are you using? -- kernel panic whith mplayer and the Option VideoOverlay is on in xorg.conf https://launchpad.net/bugs/41917 From ubuntu at paul.sladen.org Sat Apr 29 21:25:06 2006 From: ubuntu at paul.sladen.org (Paul Sladen) Date: Sat, 29 Apr 2006 21:25:06 -0000 Subject: [Bug 30350] Re: acerhk.ko should be loaded on Compal CL56 laptops for wireless and application key support References: <20060202221352.29619.3002.malonedeb@gangotri.ubuntu.com> Message-ID: <20060429212506.30638.61280.launchpad@gangotri.ubuntu.com> ** Changed in: hotkey-setup (Ubuntu) Status: Unconfirmed => Confirmed -- acerhk.ko should be loaded on Compal CL56 laptops for wireless and application key support https://launchpad.net/bugs/30350 From ubuntu at paul.sladen.org Sat Apr 29 21:31:19 2006 From: ubuntu at paul.sladen.org (Paul Sladen) Date: Sat, 29 Apr 2006 21:31:19 -0000 Subject: [Bug 30350] Re: acerhk.ko should be loaded on Compal CL56 laptops for wireless and application key support References: <20060202221352.29619.3002.malonedeb@gangotri.ubuntu.com> Message-ID: <20060429213119.30606.60026.malone@gangotri.ubuntu.com> Not sure where the: /proc/driver/acerhk/wirelessled toggling should be done from; I have similar stuff in 'acpi-support'. A better option would be to change the default-fall-through of 'acerhk' to fail to load, rather than default to a Series 200 laptop. That way, it could be always loaded regardlessly in the same way as the sony and thinkpad modules are. -- acerhk.ko should be loaded on Compal CL56 laptops for wireless and application key support https://launchpad.net/bugs/30350 From evuraan at gmail.com Sat Apr 29 21:56:26 2006 From: evuraan at gmail.com (evuraan) Date: Sat, 29 Apr 2006 21:56:26 -0000 Subject: [Bug 42129] Dapper Beta Hangs at startups if pcmcia cards are present References: <20060429204607.30606.7344.malonedeb@gangotri.ubuntu.com> Message-ID: <20060429215626.30638.28171.launchpad@canonical@gangotri.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: Dapper startup hangs at "Loading Drivers" with Cisco Aironet 350 series PCMCIA card in its slots -- works fine if it is booted without the PCMCIA card. The card in question is a Cisco AIRONET 350 series card. This problem is not found in Breezy. Note: the original reporter indicated the bug was in package 'none'; however, that package was not published in Ubuntu. -- Dapper Beta Hangs at startups if pcmcia cards are present https://launchpad.net/bugs/42129 From samtygier at yahoo.co.uk Sat Apr 29 21:56:26 2006 From: samtygier at yahoo.co.uk (sam tygier) Date: Sat, 29 Apr 2006 21:56:26 -0000 Subject: [Bug 42129] Re: Dapper Beta Hangs at startups if pcmcia cards are present References: <20060429204607.30606.7344.malonedeb@gangotri.ubuntu.com> Message-ID: <20060429215626.30638.94180.malone@gangotri.ubuntu.com> confirmed on dapper on a via epia MII, with a cisco aironet 340. ** Changed in: Ubuntu Sourcepackagename: None => linux-source-2.6.15 -- Dapper Beta Hangs at startups if pcmcia cards are present https://launchpad.net/bugs/42129 From samtygier at yahoo.co.uk Sat Apr 29 21:59:28 2006 From: samtygier at yahoo.co.uk (sam tygier) Date: Sat, 29 Apr 2006 21:59:28 -0000 Subject: [Bug 42129] Re: Dapper Beta Hangs at startups if pcmcia cards are present References: <20060429204607.30606.7344.malonedeb@gangotri.ubuntu.com> Message-ID: <20060429215928.16712.92332.malone@gandwana.ubuntu.com> dmesg [4294667.296000] Linux version 2.6.15-19-386 (buildd at rothera) (gcc version 4.0.3 (Ubuntu 4.0.3-1ubuntu3)) #1 PREEMPT Mon Mar 20 16:46:02 UTC 2006 [4294667.296000] BIOS-provided physical RAM map: [4294667.296000] BIOS-e820: 0000000000000000 - 00000000000a0000 (usable) [4294667.296000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [4294667.296000] BIOS-e820: 0000000000100000 - 000000001dff0000 (usable) [4294667.296000] BIOS-e820: 000000001dff0000 - 000000001dff3000 (ACPI NVS) [4294667.296000] BIOS-e820: 000000001dff3000 - 000000001e000000 (ACPI data) [4294667.296000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) [4294667.296000] 0MB HIGHMEM available. [4294667.296000] 479MB LOWMEM available. [4294667.296000] On node 0 totalpages: 122864 [4294667.296000] DMA zone: 4096 pages, LIFO batch:0 [4294667.296000] DMA32 zone: 0 pages, LIFO batch:0 [4294667.296000] Normal zone: 118768 pages, LIFO batch:31 [4294667.296000] HighMem zone: 0 pages, LIFO batch:0 [4294667.296000] DMI 2.2 present. [4294667.296000] ACPI: RSDP (v000 VT9174 ) @ 0x000f6570 [4294667.296000] ACPI: RSDT (v001 VT9174 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1dff3000 [4294667.296000] ACPI: FADT (v001 VT9174 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1dff3040 [4294667.296000] ACPI: DSDT (v001 VT9174 AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x00000000 [4294667.296000] ACPI: PM-Timer IO Port: 0x408 [4294667.296000] Allocating PCI resources starting at 20000000 (gap: 1e000000:e1ff0000) [4294667.296000] Built 1 zonelists [4294667.296000] Kernel command line: root=/dev/hda6 ro quiet splash [4294667.296000] No local APIC present or hardware disabled [4294667.296000] mapped APIC to ffffd000 (013c2000) [4294667.296000] Initializing CPU#0 [4294667.296000] PID hash table entries: 2048 (order: 11, 32768 bytes) [4294667.296000] Detected 600.143 MHz processor. [4294667.296000] Using pmtmr for high-res timesource [4294667.296000] Console: colour VGA+ 80x25 [4294670.700000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [4294670.704000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [4294670.819000] Memory: 476508k/491456k available (1971k kernel code, 14404k reserved, 599k data, 288k init, 0k highmem) [4294670.819000] Checking if this processor honours the WP bit even in supervisor mode... Ok. [4294670.879000] Calibrating delay using timer specific routine.. 1200.73 BogoMIPS (lpj=600365) [4294670.879000] Security Framework v1.0.0 initialized [4294670.879000] SELinux: Disabled at boot. [4294670.879000] Mount-cache hash table entries: 512 [4294670.879000] CPU: After generic identify, caps: 00803035 80803035 00000000 00000000 00000000 00000000 00000000 [4294670.879000] CPU: L1 I Cache: 64K (32 bytes/line), D cache 64K (32 bytes/line) [4294670.879000] CPU: L2 Cache: 64K (32 bytes/line) [4294670.879000] CPU: After all inits, caps: 00803135 80803035 00000000 00000000 00000000 00000000 00000000 [4294670.879000] mtrr: v2.0 (20020519) [4294670.879000] CPU: Centaur VIA Samuel 2 stepping 03 [4294670.879000] Checking 'hlt' instruction... OK. [4294670.883000] checking if image is initramfs... it is [4294674.244000] Freeing initrd memory: 6376k freed [4294674.312000] ACPI: Looking for DSDT ... not found! [4294674.322000] ACPI: setting ELCR to 0200 (from 1220) [4294674.371000] NET: Registered protocol family 16 [4294674.371000] EISA bus registered [4294674.371000] ACPI: bus type pci registered [4294674.381000] PCI: PCI BIOS revision 2.10 entry at 0xfb2d0, last bus=3 [4294674.381000] PCI: Using configuration type 1 [4294674.383000] ACPI: Subsystem revision 20051216 [4294674.404000] ACPI: Interpreter enabled [4294674.404000] ACPI: Using PIC for interrupt routing [4294674.406000] ACPI: PCI Root Bridge [PCI0] (0000:00) [4294674.406000] PCI: Probing PCI hardware (bus 00) [4294674.416000] PCI quirk: region 0400-047f claimed by vt8235 PM [4294674.416000] PCI quirk: region 0500-050f claimed by vt8235 SMB [4294674.417000] Boot video device is 0000:01:00.0 [4294674.417000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [4294674.543000] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 4 5 6 7 *12) [4294674.545000] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 4 *5 6 7 12) [4294674.547000] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 4 5 6 7 12) *9 [4294674.549000] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 4 5 6 7 *12) [4294674.562000] Linux Plug and Play Support v0.97 (c) Adam Belay [4294674.562000] pnp: PnP ACPI init [4294674.564000] pnp: PnPACPI: unknown resource type 7 [4294674.564000] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0c01 [4294674.564000] pnp: PnPACPI: unknown resource type 7 [4294674.564000] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0c02 [4294674.565000] pnp: PnPACPI: unknown resource type 7 [4294674.565000] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0c02 [4294674.565000] pnp: PnPACPI: unknown resource type 7 [4294674.565000] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0200 [4294674.565000] pnp: PnPACPI: unknown resource type 7 [4294674.566000] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0b00 [4294674.566000] pnp: PnPACPI: unknown resource type 7 [4294674.566000] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0800 [4294674.566000] pnp: PnPACPI: unknown resource type 7 [4294674.566000] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0c04 [4294674.567000] pnp: PnPACPI: unknown resource type 7 [4294674.567000] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0700 [4294674.569000] pnp: PnPACPI: unknown resource type 7 [4294674.569000] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0501 [4294674.571000] pnp: PnPACPI: unknown resource type 7 [4294674.571000] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0501 [4294674.574000] pnp: PnPACPI: unknown resource type 7 [4294674.574000] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0400 [4294674.576000] pnp: PnPACPI: unknown resource type 7 [4294674.576000] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0c02 [4294674.577000] pnp: PnP ACPI: found 0 devices [4294674.577000] PnPBIOS: Disabled by ACPI PNP [4294674.577000] PCI: Using ACPI for IRQ routing [4294674.577000] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [4294674.632000] PCI: Bridge: 0000:00:01.0 [4294674.632000] IO window: disabled. [4294674.632000] MEM window: dc000000-ddffffff [4294674.633000] PREFETCH window: d8000000-dbffffff [4294674.633000] PCI: Bus 2, cardbus bridge: 0000:00:0a.0 [4294674.633000] IO window: 00001000-000010ff [4294674.633000] IO window: 00001400-000014ff [4294674.633000] PREFETCH window: 20000000-21ffffff [4294674.633000] MEM window: 22000000-23ffffff [4294674.633000] PCI: Bus 6, cardbus bridge: 0000:00:0a.1 [4294674.633000] IO window: 00001800-000018ff [4294674.633000] IO window: 00001c00-00001cff [4294674.633000] PREFETCH window: 24000000-25ffffff [4294674.633000] MEM window: 26000000-27ffffff [4294674.633000] PCI: Setting latency timer of device 0000:00:01.0 to 64 [4294674.633000] **** SET: Misaligned resource pointer: ddf446e2 Type 07 Len 0 [4294674.635000] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 12 [4294674.635000] PCI: setting IRQ 12 as level-triggered [4294674.635000] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LNKA] -> GSI 12 (level, low) -> IRQ 12 [4294674.636000] **** SET: Misaligned resource pointer: ddf446e2 Type 07 Len 0 [4294674.637000] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5 [4294674.637000] PCI: setting IRQ 5 as level-triggered [4294674.637000] ACPI: PCI Interrupt 0000:00:0a.1[B] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5 [4294674.639000] audit: initializing netlink socket (disabled) [4294674.639000] audit(1146340523.637:1): initialized [4294674.640000] VFS: Disk quotas dquot_6.5.1 [4294674.640000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [4294674.640000] Initializing Cryptographic API [4294674.640000] io scheduler noop registered [4294674.640000] io scheduler anticipatory registered [4294674.640000] io scheduler deadline registered [4294674.640000] io scheduler cfq registered [4294674.641000] isapnp: Scanning for PnP cards... [4294674.998000] isapnp: No Plug & Play device found [4294675.055000] PNP: No PS/2 controller found. Probing ports directly. [4294675.055000] serio: i8042 AUX port at 0x60,0x64 irq 12 [4294675.056000] serio: i8042 KBD port at 0x60,0x64 irq 1 [4294675.056000] Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled [4294675.056000] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [4294675.056000] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [4294675.064000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [4294675.064000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [4294675.064000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [4294675.064000] ACPI: bus type ide registered [4294675.065000] mice: PS/2 mouse device common for all mice [4294675.065000] EISA: Probing bus 0 at eisa.0 [4294675.065000] Cannot allocate resource for EISA slot 1 [4294675.065000] EISA: Detected 0 cards. [4294675.066000] NET: Registered protocol family 2 [4294675.076000] IP route cache hash table entries: 4096 (order: 2, 16384 bytes) [4294675.076000] TCP established hash table entries: 16384 (order: 4, 65536 bytes) [4294675.077000] TCP bind hash table entries: 16384 (order: 4, 65536 bytes) [4294675.078000] TCP: Hash tables configured (established 16384 bind 16384) [4294675.078000] TCP reno registered [4294675.078000] TCP bic registered [4294675.078000] NET: Registered protocol family 1 [4294675.078000] NET: Registered protocol family 8 [4294675.078000] NET: Registered protocol family 20 [4294675.078000] Using IPI Shortcut mode [4294675.079000] ACPI wakeup devices: [4294675.079000] PCI0 USB0 USB1 USB2 USB3 USB4 USB5 USB6 LAN0 AC97 MC97 UAR1 [4294675.079000] ACPI: (supports S0 S1 S3 S4 S5) [4294675.079000] Freeing unused kernel memory: 288k freed [4294675.503000] vga16fb: initializing [4294675.503000] vga16fb: mapped to 0xc00a0000 [4294675.634000] Console: switching to colour frame buffer device 80x25 [4294675.634000] fb0: VGA16 VGA frame buffer device [4294676.828000] Capability LSM initialized [4294677.036000] ACPI: CPU0 (power states: C1[C1] C2[C2]) [4294677.036000] ACPI: Processor [CPU0] (supports 2 throttling states) [4294679.429000] VP_IDE: IDE controller at PCI slot 0000:00:11.1 [4294679.429000] ACPI: PCI Interrupt 0000:00:11.1[A] -> Link [LNKA] -> GSI 12 (level, low) -> IRQ 12 [4294679.429000] PCI: Via IRQ fixup for 0000:00:11.1, from 255 to 12 [4294679.429000] VP_IDE: chipset revision 6 [4294679.429000] VP_IDE: not 100% native mode: will probe irqs later [4294679.429000] VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci0000:00:11.1 [4294679.430000] ide0: BM-DMA at 0xc000-0xc007, BIOS settings: hda:DMA, hdb:pio [4294679.430000] ide1: BM-DMA at 0xc008-0xc00f, BIOS settings: hdc:DMA, hdd:pio [4294679.430000] Probing IDE interface ide0... [4294679.816000] hda: SAMSUNG SP1213N, ATA DISK drive [4294680.428000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [4294680.428000] Probing IDE interface ide1... [4294681.222000] hdc: SAMSUNG CD-ROM SN-124, ATAPI CD/DVD-ROM drive [4294681.834000] ide1 at 0x170-0x177,0x376 on irq 15 [4294681.866000] hda: max request size: 1024KiB [4294681.908000] hda: 234493056 sectors (120060 MB) w/8192KiB Cache, CHS=16383/255/63, UDMA(100) [4294681.908000] hda: cache flushes supported [4294681.909000] hda: hda1 hda2 < hda5 hda6 hda7 hda8 hda9 > [4294681.995000] hdc: ATAPI 24X CD-ROM drive, 128kB Cache, UDMA(33) [4294681.995000] Uniform CD-ROM driver Revision: 3.20 [4294682.626000] usbcore: registered new driver usbfs [4294682.628000] usbcore: registered new driver hub [4294682.636000] USB Universal Host Controller Interface driver v2.3 [4294682.638000] ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [LNKA] -> GSI 12 (level, low) -> IRQ 12 [4294682.638000] uhci_hcd 0000:00:10.0: UHCI Host Controller [4294682.643000] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1 [4294682.643000] uhci_hcd 0000:00:10.0: irq 12, io base 0x0000b400 [4294682.651000] hub 1-0:1.0: USB hub found [4294682.651000] hub 1-0:1.0: 2 ports detected [4294682.753000] ACPI: PCI Interrupt 0000:00:10.1[B] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5 [4294682.753000] uhci_hcd 0000:00:10.1: UHCI Host Controller [4294682.753000] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2 [4294682.753000] uhci_hcd 0000:00:10.1: irq 5, io base 0x0000b800 [4294682.755000] hub 2-0:1.0: USB hub found [4294682.755000] hub 2-0:1.0: 2 ports detected [4294682.856000] **** SET: Misaligned resource pointer: ddc4df02 Type 07 Len 0 [4294682.858000] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5 [4294682.858000] ACPI: PCI Interrupt 0000:00:10.2[C] -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5 [4294682.859000] PCI: Via IRQ fixup for 0000:00:10.2, from 9 to 5 [4294682.859000] uhci_hcd 0000:00:10.2: UHCI Host Controller [4294682.859000] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3 [4294682.859000] uhci_hcd 0000:00:10.2: irq 5, io base 0x0000bc00 [4294682.861000] hub 3-0:1.0: USB hub found [4294682.861000] hub 3-0:1.0: 2 ports detected [4294682.959000] usb 1-1: new full speed USB device using uhci_hcd and address 2 [4294682.969000] **** SET: Misaligned resource pointer: ddc4dc02 Type 07 Len 0 [4294682.971000] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 12 [4294682.971000] ACPI: PCI Interrupt 0000:00:10.3[D] -> Link [LNKD] -> GSI 12 (level, low) -> IRQ 12 [4294682.971000] ehci_hcd 0000:00:10.3: EHCI Host Controller [4294682.972000] ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4 [4294682.973000] ehci_hcd 0000:00:10.3: irq 12, io mem 0xde00b000 [4294682.973000] ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [4294682.974000] hub 4-0:1.0: USB hub found [4294682.974000] hub 4-0:1.0: 6 ports detected [4294683.566000] kjournald starting. Commit interval 5 seconds [4294683.566000] EXT3-fs: mounted filesystem with ordered data mode. [4294683.742000] usb 4-1: new high speed USB device using ehci_hcd and address 2 [4294683.858000] hub 4-1:1.0: USB hub found [4294683.858000] hub 4-1:1.0: 4 ports detected [4294684.293000] usb 4-1.2: new low speed USB device using ehci_hcd and address 4 [4294684.594000] usb 1-2: new full speed USB device using uhci_hcd and address 3 [4294700.690000] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LNKA] -> GSI 12 (level, low) -> IRQ 12 [4294700.690000] Yenta: CardBus bridge found at 0000:00:0a.0 [1106:aa01] [4294700.707000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [4294700.793000] ieee1394: Initialized config rom entry `ip1394' [4294700.815000] Linux agpgart interface v0.101 (c) Dave Jones [4294700.817000] Yenta: ISA IRQ mask 0x0c00, PCI irq 12 [4294700.817000] Socket status: 30000410 [4294700.830000] agpgart: Detected VIA CLE266 chipset [4294700.841000] agpgart: AGP aperture is 128M @ 0xd0000000 [4294700.881000] ACPI: PCI Interrupt 0000:00:0a.1[B] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5 [4294700.881000] Yenta: CardBus bridge found at 0000:00:0a.1 [1106:aa01] [4294701.003000] Yenta: ISA IRQ mask 0x0c00, PCI irq 5 [4294701.003000] Socket status: 30000006 [4294701.008000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [4294701.056000] ohci1394: $Rev: 1313 $ Ben Collins [4294701.056000] ACPI: PCI Interrupt 0000:00:0d.0[A] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5 [4294701.808000] pccard: PCMCIA card inserted into slot 0 [4294702.990000] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[5] MMIO=[de00a000-de00a7ff] Max Packet=[2048] [4294703.049000] via-rhine.c:v1.10-LK1.2.0-2.6 June-10-2004 Written by Donald Becker [4294703.050000] ACPI: PCI Interrupt 0000:00:12.0[A] -> Link [LNKA] -> GSI 12 (level, low) -> IRQ 12 [4294703.054000] eth0: VIA Rhine II at 0x1c800, 00:40:63:d5:18:29, IRQ 12. [4294703.055000] eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link c1e1. [4294703.743000] cs: IO port probe 0x100-0x4ff: excluding 0x378-0x37f 0x4d0-0x4d7 [4294703.745000] cs: IO port probe 0xc00-0xcf7: clean. [4294703.746000] cs: IO port probe 0xa00-0xaff: clean. [4294704.568000] usbcore: registered new driver hiddev [4294704.574000] input: CHESEN USB Keyboard as /class/input/input0 [4294704.574000] input: USB HID v1.10 Keyboard [CHESEN USB Keyboard] on usb-0000:00:10.3-1.2 [4294704.584000] input: CHESEN USB Keyboard as /class/input/input1 [4294704.585000] input: USB HID v1.10 Mouse [CHESEN USB Keyboard] on usb-0000:00:10.3-1.2[4294704.585000] usbcore: registered new driver usbhid [4294704.585000] drivers/usb/input/hid-core.c: v2.6:USB HID core driver [4294705.403000] cs: IO port probe 0x100-0x4ff: excluding 0x378-0x37f 0x4d0-0x4d7 [4294705.405000] cs: IO port probe 0xc00-0xcf7: clean. [4294705.406000] cs: IO port probe 0xa00-0xaff: clean. [4294705.408000] cs: memory probe 0xa0000000-0xa0ffffff:<7>ieee1394: Host added: ID:BUS[0-00:1023] GUID[004063500000f676] [4294705.448000] irda_init() [4294705.448000] NET: Registered protocol family 23 [4294705.667000] clean. [4294705.667000] pcmcia: registering new device pcmcia0.0 [4294707.939000] ts: Compaq touchscreen protocol output [4294709.157000] airo: Probing for PCI adapters [4294709.159000] airo: Finished probing for PCI adapters [4294709.272000] eth0: link up, 100Mbps, full-duplex, lpa 0xC1E1 [4294710.396000] airo: cmd= 111 [4294710.396000] airo: status= 7f11 [4294710.396000] airo: Rsp0= 2 [4294710.396000] airo: Rsp1= 0 [4294710.396000] airo: Rsp2= 0 [4294710.396000] airo: Doing fast bap_reads [4294710.592000] airo: MAC enabled eth1 0:40:96:55:d:37 [4294710.592000] eth1: index 0x05: Vcc 5.0, Vpp 5.0, irq 10, io 0x0100-0x013f [4294710.937000] Setting key 0 [4294711.298000] usbcore: registered new driver snd-usb-audio [4294712.842000] NET: Registered protocol family 17 [4294714.648000] NET: Registered protocol family 10 [4294714.648000] lo: Disabled Privacy Extensions [4294714.650000] IPv6 over IPv4 tunneling driver [4294725.160000] eth0: no IPv6 routers present [4294725.160000] eth1: no IPv6 routers present [4294854.292000] pccard: card ejected from slot 0 [4294854.292000] airo: cmd= 2 [4294854.292000] airo: status= ffff [4294854.292000] airo: Rsp0= ffff [4294854.292000] airo: Rsp1= ffff [4294854.292000] airo: Rsp2= ffff [4294854.292000] airo: cmd= 21 [4294854.292000] airo: status= ffff [4294854.292000] airo: Rsp0= ffff [4294854.292000] airo: Rsp1= ffff [4294854.292000] airo: Rsp2= ffff [4294854.298000] airo: cmd= 21 [4294854.298000] airo: status= ffff [4294854.298000] airo: Rsp0= ffff [4294854.298000] airo: Rsp1= ffff [4294854.298000] airo: Rsp2= ffff [4294854.308000] airo: cmd= 21 [4294854.308000] airo: status= ffff [4294854.308000] airo: Rsp0= ffff [4294854.308000] airo: Rsp1= ffff [4294854.308000] airo: Rsp2= ffff [4294855.684000] parport0: PC-style at 0x378 [PCSPP,TRISTATE,EPP] [4294855.770000] lp0: using parport0 (polling). [4294856.205000] SCSI subsystem initialized [4294856.226000] sbp2: $Rev: 1306 $ Ben Collins [4294856.226000] ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1) [4294856.226000] ieee1394: sbp2: Try serialize_io=0 for better performance [4294856.570000] Adding 979924k swap on /dev/hda1. Priority:-1 extents:1 across:979924k [4294856.799000] EXT3 FS on hda6, internal journal [4294857.469000] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 [4294857.469000] md: bitmap version 4.39 [4294858.758000] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel at redhat.com[4294858.810000] pccard: PCMCIA card inserted into slot 0 [4294858.810000] pcmcia: registering new device pcmcia0.0 [4294859.977000] airo: cmd= 111 [4294859.977000] airo: status= 7f11 [4294859.977000] airo: Rsp0= 2 [4294859.977000] airo: Rsp1= 0 [4294859.977000] airo: Rsp2= 0 [4294859.977000] airo: Doing fast bap_reads [4294859.999000] airo: MAC enabled eth1 0:40:96:55:d:37 [4294860.000000] eth1: index 0x05: Vcc 5.0, Vpp 5.0, irq 10, io 0x0100-0x013f [4294860.464000] cdrom: open failed. [4294860.609000] Setting key 0 [4294861.970000] kjournald starting. Commit interval 5 seconds [4294861.970000] EXT3 FS on hda5, internal journal [4294861.970000] EXT3-fs: mounted filesystem with ordered data mode. [4294866.787000] ACPI: Power Button (FF) [PWRF] [4294866.787000] ACPI: Power Button (CM) [PWRB] [4294867.462000] ibm_acpi: ec object not found [4294872.294000] eth1: no IPv6 routers present [4294876.967000] spurious 8259A interrupt: IRQ7. [4294892.935000] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac) [4294892.936000] apm: overridden by ACPI. [4294896.739000] hdc: drive_cmd: status=0x51 { DriveReady SeekComplete Error } [4294896.739000] hdc: drive_cmd: error=0x04 { AbortedCommand } [4294896.739000] ide: failed opcode was: 0xec [4294897.100000] hdc: drive_cmd: status=0x51 { DriveReady SeekComplete Error } [4294897.100000] hdc: drive_cmd: error=0x04 { AbortedCommand } [4294897.100000] ide: failed opcode was: 0xec [4294901.158000] Bluetooth: Core ver 2.8 [4294901.158000] NET: Registered protocol family 31 [4294901.158000] Bluetooth: HCI device and connection manager initialized [4294901.158000] Bluetooth: HCI socket layer initialized [4294901.218000] Bluetooth: L2CAP ver 2.8 [4294901.218000] Bluetooth: L2CAP socket layer initialized [4294901.231000] Bluetooth: RFCOMM socket layer initialized [4294901.231000] Bluetooth: RFCOMM TTY layer initialized [4294901.231000] Bluetooth: RFCOMM ver 1.7 ======== note: [4294714.650000] IPv6 over IPv4 tunneling driver [4294725.160000] eth0: no IPv6 routers present [4294725.160000] eth1: no IPv6 routers present [4294854.292000] pccard: card ejected from slot 0 when i ejected the card it carried on booting. -- Dapper Beta Hangs at startups if pcmcia cards are present https://launchpad.net/bugs/42129 From samtygier at yahoo.co.uk Sat Apr 29 22:11:13 2006 From: samtygier at yahoo.co.uk (sam tygier) Date: Sat, 29 Apr 2006 22:11:13 -0000 Subject: [Bug 42129] Re: Dapper Beta Hangs at startups if pcmcia cards are present References: <20060429204607.30606.7344.malonedeb@gangotri.ubuntu.com> Message-ID: <20060429221113.16739.88443.launchpad@gandwana.ubuntu.com> ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Unconfirmed => Confirmed -- Dapper Beta Hangs at startups if pcmcia cards are present https://launchpad.net/bugs/42129 From bluekuja at gmail.com Sat Apr 29 22:34:31 2006 From: bluekuja at gmail.com (Andrea Veri) Date: Sat, 29 Apr 2006 22:34:31 -0000 Subject: [Bug 40220] Re: linux-image-2.6.15-12-386 kernel have problems with my sound card References: <20060419204151.21526.71142.malonedeb@gangotri.ubuntu.com> Message-ID: <20060429223431.30638.50356.malone@gangotri.ubuntu.com> Right now i'm testing new beta so i'm having the possibility to update all packages , by the way problem solved with new kernel. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Unconfirmed => Fix Released -- linux-image-2.6.15-12-386 kernel have problems with my sound card https://launchpad.net/bugs/40220 From gislio at gmail.com Sat Apr 29 22:40:24 2006 From: gislio at gmail.com (Gisli Ottarsson) Date: Sat, 29 Apr 2006 22:40:24 -0000 Subject: [Bug 40993] Ubuntu 6.06 beta installation problem (dual IDE controller or raid related?) References: <20060423221739.4079.13194.malonedeb@gangotri.ubuntu.com> Message-ID: <20060429224024.16739.51154.launchpad@canonical@gandwana.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Confirmed Description: I am having a curious problem installing Ubuntu 6.06 beta on my system. This system has previously run Ubuntu 5.08 but I thought I would try a clean install. After a successful installation, I am unable to log in because the system claims to be unable to mount the root filesystem on /dev/sda1. A novice inspection suggests that the reason for this may be that the order of disks has changed between installation and first boot. Let me add a little bit more detail: My machine has four 120Gb IDE hard drives attached, in pairs, to two separate IDE controllers. Each of the disks has one large partition which I intend to set up in a 1+0 configuration. This does not seem to be possible during installation and I was going to tend to this later. These partitions were not mentioned during the installation and I don't think this is an issue. Each disk also has a swap partition (/dev/sd[abcd]2) and a 8.5 Gb partition (/dev/sd[abcd]1). One of these /dev/sda1 was to serve as my / partition and the other three (/dev/sdb1, /dev/sdc1 and /dev/sdd1) were set up as a RAID5 to hold /usr. None of this seemed to be an issue during the installation. Both contain the Reiser filesystem. At first boot, it seems as if the order of the two IDE controllers has been switched. The system is unable to mount /dev/sda1 and when I use the busybox shell (which I am dumped into following the failed installation) to look at /dev/mdstat, it seems that /dev/sda1 is one of the partitions that the system now believes is involved in the RAID5. I can manually mount /dev/md0, but /dev/sda1 is claimed to be busy. On a lark I tried to mount /dev/sdc1 and it seems to hold the contents of / Unfortunately I do not know how to dig deeper by myself, but I would be honored to assist in the resolution of this matter. Best regards Gisli PS: Please note that /dev/md0 existed from previously running Ubuntu. It was not created by 6.06. I was somewhat surprised not to see it directly in the partitioner but I selected the option to define a RAID but immediately finished and then the RAID was found. I then asked to have it formatted and mounted as /usr. No complaints. -- Ubuntu 6.06 beta installation problem (dual IDE controller or raid related?) https://launchpad.net/bugs/40993 From lakin.wecker at gmail.com Sat Apr 29 22:36:46 2006 From: lakin.wecker at gmail.com (Lakin Wecker) Date: Sat, 29 Apr 2006 22:36:46 -0000 Subject: [Bug 42135] kernel 2.6.15-21-386 fails to boot due to switching names of hardrives from hda to hdb References: <20060429223646.16712.10218.malonedeb@gandwana.ubuntu.com> Message-ID: <20060429223646.16712.10218.malonedeb@gandwana.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: I had been using a fairly up to date (every day or two) installed from a flight-6 kubuntu install cd. Today I did my updates, and now the machine won't boot. Somehow, the kernel has switched the names of the harddrives from hda->hdb and vice versa, meaning that the grub kernel option is wrong. If I fix this in grub, the system will sort of boot until it tries to mount all of the filesystems at which point it fails because /etc/fstab lists everything as /dev/hdaX . and now the kernel has named those: /dev/hdbX ... I don't remember which version of the kernel that I was using before this, I just know that it stopped working after upgrading about an hour ago. -- kernel 2.6.15-21-386 fails to boot due to switching names of hardrives from hda to hdb https://launchpad.net/bugs/42135 From remocmail-1shot at yahoo.com Sat Apr 29 22:44:11 2006 From: remocmail-1shot at yahoo.com (celem) Date: Sat, 29 Apr 2006 22:44:11 -0000 Subject: [Bug 42137] orinoco driver monitor mode not supported References: <20060429224411.16739.77032.malonedeb@gandwana.ubuntu.com> Message-ID: <20060429224411.16739.77032.malonedeb@gandwana.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: How about installing the fix for "monitor" and "RFMON" mode on the orinoco WiFi cards that is at: http://airsnort.shmoo.com/orinocoinfo.html Many people state that the patch works well, and since the orinoco drivers currently in Dapper Beta still don't support monitor mode, it sure would be nice if this patch was applied to dapper before it is released. -- orinoco driver monitor mode not supported https://launchpad.net/bugs/42137 From ubuntu at paul.sladen.org Sat Apr 29 22:40:24 2006 From: ubuntu at paul.sladen.org (Paul Sladen) Date: Sat, 29 Apr 2006 22:40:24 -0000 Subject: [Bug 40993] Re: Ubuntu 6.06 beta installation problem (dual IDE controller or raid related?) References: <20060423221739.4079.13194.malonedeb@gangotri.ubuntu.com> Message-ID: <20060429224024.16739.10992.launchpad@gandwana.ubuntu.com> *** This bug is a duplicate of bug 6367 *** ** Changed in: Ubuntu Sourcepackagename: None => linux-source-2.6.15 Status: Unconfirmed => Confirmed ** This bug has been marked a duplicate of bug 6367 Wrong IDE enumeration with multiple IDE controllers -- Ubuntu 6.06 beta installation problem (dual IDE controller or raid related?) https://launchpad.net/bugs/40993 From ubuntu at paul.sladen.org Sat Apr 29 22:42:37 2006 From: ubuntu at paul.sladen.org (Paul Sladen) Date: Sat, 29 Apr 2006 22:42:37 -0000 Subject: [Bug 6367] Re: Wrong IDE enumeration with multiple IDE controllers References: <20060102180911.29335.17628.malonedeb@gangotri.ubuntu.com> Message-ID: <20060429224237.16712.24646.malone@gandwana.ubuntu.com> I noticed these updates: linux-source-2.6.15 (2.6.15-21.31) dapper; urgency=low * ide-acpi: Replaces our old IDE ACPI support code with new and shiney stuff that should work better on some hardware. ...is this related in any manner? ** Bug 40993 has been marked a duplicate of this bug -- Wrong IDE enumeration with multiple IDE controllers https://launchpad.net/bugs/6367 From lakin.wecker at gmail.com Sat Apr 29 22:46:08 2006 From: lakin.wecker at gmail.com (Lakin Wecker) Date: Sat, 29 Apr 2006 22:46:08 -0000 Subject: [Bug 42135] Re: kernel 2.6.15-21-386 fails to boot due to switching names of hardrives from hda to hdb References: <20060429223646.16712.10218.malonedeb@gandwana.ubuntu.com> Message-ID: <20060429224608.16739.98731.malone@gandwana.ubuntu.com> Wierd ... now the machine is booting just fine .... It must have been some wierd hardware hiccough. Although that doesn't completely make sense either, because during the 30 minutes that this was happening, grub always detected the master harddrive as hd0 and the slave as hd1 ... In any case, I'll re-open this if I see the behavior again. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Unconfirmed => Rejected -- kernel 2.6.15-21-386 fails to boot due to switching names of hardrives from hda to hdb https://launchpad.net/bugs/42135 From gislio at gmail.com Sat Apr 29 23:10:30 2006 From: gislio at gmail.com (Gisli Ottarsson) Date: Sat, 29 Apr 2006 23:10:30 -0000 Subject: [Bug 40993] Re: [Bug 40993] Re: Ubuntu 6.06 beta installation problem (dual IDE controller or raid related?) References: <20060423221739.4079.13194.malonedeb@gangotri.ubuntu.com> <20060429224024.16739.10992.launchpad@gandwana.ubuntu.com> Message-ID: <22d42dd20604291610pe9c34dby5e957503c7afb6e9@mail.gmail.com> *** This bug is a duplicate of bug 6367 *** As requested, the output of lsmod on my system. Please note that this generated with the system in a functioning state, i.e., with all four disks attached to the same controller: gisli at loki:~$ lsmod Module Size Used by acpi_sbs 19980 0 i2c_acpi_ec 5120 1 acpi_sbs i2c_core 21904 1 i2c_acpi_ec battery 9988 1 acpi_sbs ac 5252 1 acpi_sbs thermal 13576 0 processor 23360 1 thermal fan 4868 0 button 6672 0 e1000 118840 0 nls_utf8 2176 1 udf 88452 1 ipv6 265600 6 rfcomm 40216 0 l2cap 26244 5 rfcomm bluetooth 49892 4 rfcomm,l2cap speedstep_lib 4484 0 cpufreq_powersave 1920 0 cpufreq_stats 5636 0 cpufreq_userspace 4696 0 cpufreq_ondemand 6428 0 cpufreq_conservative 7332 0 freq_table 4740 1 cpufreq_stats tc1100_wmi 6916 0 video 16260 0 container 4608 0 pcc_acpi 12416 0 sony_acpi 5516 0 dev_acpi 11140 0 hotkey 11556 0 dm_mod 58936 1 raid1 22656 1 sbp2 24196 0 lp 11844 0 rsrc_nonstatic 13440 0 pcmcia_core 42640 1 rsrc_nonstatic af_packet 22920 2 tsdev 8000 0 snd_intel8x0 33820 5 floppy 62148 0 snd_ac97_codec 92704 1 snd_intel8x0 snd_ac97_bus 2304 1 snd_ac97_codec snd_pcm_oss 53664 0 snd_mixer_oss 18688 1 snd_pcm_oss parport_pc 35780 1 parport 36296 2 lp,parport_pc ohci1394 35124 0 snd_mpu401 6728 0 snd_mpu401_uart 7680 1 snd_mpu401 snd_rawmidi 25504 1 snd_mpu401_uart snd_seq_device 8716 1 snd_rawmidi analog 12320 0 gameport 15496 1 analog psmouse 36228 0 rtc 13492 0 snd_pcm 89736 4 snd_intel8x0,snd_ac97_codec,snd_pcm_oss snd_timer 25220 4 snd_pcm ieee1394 299832 2 sbp2,ohci1394 serio_raw 7300 0 nvidia 3921884 0 snd 55268 16 snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_mpu401,snd_mpu401_uart,snd_rawmidi,snd_seq_device,snd_pcm,snd_timer soundcore 10208 1 snd usblp 13056 1 pcspkr 2180 0 snd_page_alloc 10632 2 snd_intel8x0,snd_pcm hw_random 5652 0 shpchp 45632 0 intel_agp 22940 1 agpgart 34888 2 nvidia,intel_agp pci_hotplug 29236 1 shpchp sg 37920 0 evdev 9856 1 reiserfs 268016 4 raid5 28544 1 xor 15624 1 raid5 raid0 8832 2 md_mod 72532 5 raid1,raid5,raid0 ide_generic 1536 0 ehci_hcd 32008 0 uhci_hcd 33680 0 usbcore 129668 5 usblp,ehci_hcd,uhci_hcd ide_cd 33028 1 cdrom 38560 1 ide_cd piix 11012 1 generic 5124 0 sd_mod 19984 18 sata_promise 11780 28 libata 75660 1 sata_promise scsi_mod 139240 5 sbp2,sg,sd_mod,sata_promise,libata capability 5000 0 commoncap 7296 1 capability vga16fb 13448 1 vgastate 10368 1 vga16fb fbcon 42784 73 tileblit 2816 1 fbcon font 8320 1 fbcon bitblit 6272 1 fbcon softcursor 2304 1 bitblit Yup, ide_generic seems to be there. gisli at loki:~$ lsmod | grep ide_generic ide_generic 1536 0 Gisli On 4/29/06, Paul Sladen wrote: > *** This bug is a duplicate of bug 6367 *** > > ** Changed in: Ubuntu > Sourcepackagename: None => linux-source-2.6.15 > Status: Unconfirmed => Confirmed > > ** This bug has been marked a duplicate of bug 6367 > Wrong IDE enumeration with multiple IDE controllers > > -- > Ubuntu 6.06 beta installation problem (dual IDE controller or raid related?) > https://launchpad.net/bugs/40993 > -- Ubuntu 6.06 beta installation problem (dual IDE controller or raid related?) https://launchpad.net/bugs/40993 From ricardo.lanziano at gmail.com Sun Apr 30 01:49:09 2006 From: ricardo.lanziano at gmail.com (arpunk) Date: Sun, 30 Apr 2006 01:49:09 -0000 Subject: [Bug 42137] Re: orinoco driver monitor mode not supported References: <20060429224411.16739.77032.malonedeb@gandwana.ubuntu.com> Message-ID: <20060430014909.16739.63702.malone@gandwana.ubuntu.com> There is no RFMON for orinoco anymore, the current working patch is only for kernel 2.6.12 only and acording to the orinoco authors they dont have plans for fixing some bugs in the drivers. The patch for orinoco 0.13 will not work on current or modern kernels unless someone ports it and it seems there isnt any plans to do that. -- orinoco driver monitor mode not supported https://launchpad.net/bugs/42137 From ubuntu at psi-aus.com Sun Apr 30 02:51:34 2006 From: ubuntu at psi-aus.com (Craig Sampson) Date: Sun, 30 Apr 2006 02:51:34 -0000 Subject: [Bug 42060] Re: Atheros wifi cards appear not to be working in 2.6.25-21 References: <44530682.2070000@canonical.com> Message-ID: <20060430025134.16739.29025.malone@gandwana.ubuntu.com> Everything fine here with latest kernel (2.6.15-21-686) on my DWL-650. Probably a kernel build/restricted modules hickup? Craig -- Atheros wifi cards appear not to be working in 2.6.25-21 https://launchpad.net/bugs/42060 From plaur_27 at yahoo.de Sun Apr 30 08:36:28 2006 From: plaur_27 at yahoo.de (Laurentiu Pancescu) Date: Sun, 30 Apr 2006 08:36:28 -0000 Subject: [Bug 42206] make-kpkg doesn't include Makefile.cpu in kernel-headers References: <20060430083628.16739.57818.malonedeb@gandwana.ubuntu.com> Message-ID: <20060430083628.16739.57818.malonedeb@gandwana.ubuntu.com> Public bug reported: Affects: kernel-package (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: When using make-kpkg --initrd --append-to-version=-custom kernel_image kernel_headers, the generated kernel_headers package doesn't include Makefile.cpu. This is needed to compile the ATI proprietary drivers (module-assistant build,install fglrx-kernel). This seems to be Debian's bug 351370 [1], already fixed in Debian's kernel-package since February (version 10.018). Ubuntu includes an older version, 9.001ubuntu15. [1] http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=351370 -- make-kpkg doesn't include Makefile.cpu in kernel-headers https://launchpad.net/bugs/42206 From plaur_27 at yahoo.de Sun Apr 30 08:38:14 2006 From: plaur_27 at yahoo.de (Laurentiu Pancescu) Date: Sun, 30 Apr 2006 08:38:14 -0000 Subject: [Bug 42206] Re: make-kpkg doesn't include Makefile.cpu in kernel-headers References: <20060430083628.16739.57818.malonedeb@gandwana.ubuntu.com> Message-ID: <20060430083814.30638.8886.malone@gangotri.ubuntu.com> I forgot to mention, I was trying to generate packages for vanilla kernel 2.6.17-rc3. -- make-kpkg doesn't include Makefile.cpu in kernel-headers https://launchpad.net/bugs/42206 From plaur_27 at yahoo.de Sun Apr 30 08:55:15 2006 From: plaur_27 at yahoo.de (Laurentiu Pancescu) Date: Sun, 30 Apr 2006 08:55:15 -0000 Subject: [Bug 42210] Dapper hangs at boot, when starting X with Radeon 9250 References: <20060430085515.30606.20439.malonedeb@gangotri.ubuntu.com> Message-ID: <20060430085515.30606.20439.malonedeb@gangotri.ubuntu.com> Public bug reported: Affects: linux-meta linux-image-2.6-k7 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: When Dapper boots, the machine freezes completely when starting X (I don't have a second machine to ping from, but the ATX power button doesn't initiate a shutdown, like it does with other X hangs). If I disable X.org's dri extension, the hang disappears. This problem seems to be related with Dapper's 2.6.15. Booting with 2.6.12 from Breezy works just fine, even with dri enabled. I compiled and installed a vanilla 2.6.17-rc3 from kernel.org, and that one works fine, too. I have a HIS Radeon 9250 (256MB VRAM, 128bit interface) on an Asus A7V133. There were no X or kernel log entries about anything wrong (I remounted the partition with the sync option, to be sure). The Alt-SysRq combinations also didn't produce any log entries, I had to hard-reset the machine. This is 100% reproducible, it happens every single time X starts. -- Dapper hangs at boot, when starting X with Radeon 9250 https://launchpad.net/bugs/42210 From debian at hispeed.ch Sun Apr 30 09:13:58 2006 From: debian at hispeed.ch (WaVeR) Date: Sun, 30 Apr 2006 09:13:58 -0000 Subject: [Bug 41917] Re: kernel panic whith mplayer and the Option VideoOverlay is on in xorg.conf References: <20060428152937.28955.66281.malonedeb@gandwana.ubuntu.com> Message-ID: <20060430091358.30638.29495.malone@gangotri.ubuntu.com> I have the same problem with fglrx. Ubuntu: Dapper Kernel: 2.6.15-21-686 xorg-driver-fglrx: 6.9.0-8.24.8+2.6.15 -- kernel panic whith mplayer and the Option VideoOverlay is on in xorg.conf https://launchpad.net/bugs/41917 From plaur_27 at yahoo.de Sun Apr 30 09:19:08 2006 From: plaur_27 at yahoo.de (Laurentiu Pancescu) Date: Sun, 30 Apr 2006 09:19:08 -0000 Subject: [Bug 42206] Re: make-kpkg doesn't include Makefile.cpu in kernel-headers References: <20060430083628.16739.57818.malonedeb@gandwana.ubuntu.com> Message-ID: <20060430091908.16712.85570.malone@gandwana.ubuntu.com> As the Debian bug report mentions, Makefile.cpu is included in the generated kernel-source package, so I generated that one, and copied the file from there. After this, module-assistant fails due to missing scripts/Makefile.lib.c. I finally ran module-assistant -k /usr/src/linux build,install fglrx-kernel, which starts to work, until it stops with a compile errors in ATI's source (their code probably doesn't support 2.7.17-rc3, as it compiled with 2.6.12 from breezy). -- make-kpkg doesn't include Makefile.cpu in kernel-headers https://launchpad.net/bugs/42206 From gilles.touze at laposte.net Sun Apr 30 10:16:46 2006 From: gilles.touze at laposte.net (Gilles) Date: Sun, 30 Apr 2006 10:16:46 -0000 Subject: [Bug 42207] module aic7xx doesn't work with kernel 2.6.15-20-386 (work with 2.6.15-19-386) References: <20060430084539.16739.56144.malonedeb@gandwana.ubuntu.com> Message-ID: <20060430101646.30638.17056.launchpad@canonical@gangotri.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: here dmesg output: root at bonsecours1:/home/gilles# dmesg | grep "aic7" [4294672.594000] aic7xxx: Unknown symbol spi_populate_sync_msg [4294672.594000] aic7xxx: Unknown symbol spi_populate_width_msg [4294672.594000] aic7xxx: Unknown symbol spi_populate_ppr_msg [4294672.606000] aic7xxx: Unknown symbol spi_populate_sync_msg [4294672.606000] aic7xxx: Unknown symbol spi_populate_width_msg [4294672.606000] aic7xxx: Unknown symbol spi_populate_ppr_msg [4294688.886000] aic7xxx: Unknown symbol spi_populate_sync_msg [4294688.887000] aic7xxx: Unknown symbol spi_populate_width_msg [4294688.887000] aic7xxx: Unknown symbol spi_populate_ppr_msg -- module aic7xx doesn't work with kernel 2.6.15-20-386 (work with 2.6.15-19-386) https://launchpad.net/bugs/42207 From samtygier at yahoo.co.uk Sun Apr 30 10:16:46 2006 From: samtygier at yahoo.co.uk (sam tygier) Date: Sun, 30 Apr 2006 10:16:46 -0000 Subject: [Bug 42207] Re: module aic7xx doesn't work with kernel 2.6.15-20-386 (work with 2.6.15-19-386) References: <20060430084539.16739.56144.malonedeb@gandwana.ubuntu.com> Message-ID: <20060430101646.30638.68063.launchpad@gangotri.ubuntu.com> ** Changed in: Ubuntu Sourcepackagename: None => linux-source-2.6.15 -- module aic7xx doesn't work with kernel 2.6.15-20-386 (work with 2.6.15-19-386) https://launchpad.net/bugs/42207 From alynch at hotmail.co.uk Sun Apr 30 10:23:07 2006 From: alynch at hotmail.co.uk (abdulhaq) Date: Sun, 30 Apr 2006 10:23:07 -0000 Subject: [Bug 38263] Re: freeze at startup References: <20060405194706.24486.46138.malonedeb@gangotri.ubuntu.com> Message-ID: <20060430102307.16712.82674.malone@gandwana.ubuntu.com> I have the same problem and also have an ATI Radeon Express 200. acpi=off bypasses the problem but the system seems to hang when starting X. -- freeze at startup https://launchpad.net/bugs/38263 From launchpad.net.tormod at xoxy.net Sun Apr 30 10:28:37 2006 From: launchpad.net.tormod at xoxy.net (Tormod Volden) Date: Sun, 30 Apr 2006 10:28:37 -0000 Subject: [Bug 33368] Re: X freeze the computer (Dapper - glcore) References: <20060302082234.17525.50004.malonedeb@gangotri.ubuntu.com> Message-ID: <20060430102838.16739.36396.malone@gandwana.ubuntu.com> Does disabling DRI resolve this, like in bug #41340? See also http://www.thinkwiki.org/wiki/Problem_with_video_related_system_lockup ** Changed in: xorg (Ubuntu) Sourcepackagename: xorg => xserver-xorg-driver-savage -- X freeze the computer (Dapper - glcore) https://launchpad.net/bugs/33368 From cliechti at gmx.net Sun Apr 30 10:46:09 2006 From: cliechti at gmx.net (zsquareplusc) Date: Sun, 30 Apr 2006 10:46:09 -0000 Subject: [Bug 42149] USB devices are not powered off at shutdown (Dapper, 2.6.15) References: <20060430000107.30638.44365.malonedeb@gangotri.ubuntu.com> Message-ID: <20060430104609.16712.44443.launchpad@canonical@gandwana.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: After the machine is shut down are USB devices still powered, e.g. the optical mouse is still lighted. Other USB ports, even without any hardware connected, keep power too. This was not the case with earlier Kernels/Ubuntu installs, where the power on all USB ports was switched off. Ubuntu Dapper Beta Linux 2.6.15-21-amd64-generic #1 SMP PREEMPT Fri Apr 21 16:42:20 UTC 2006 x86_64 GNU/Linux -- USB devices are not powered off at shutdown (Dapper, 2.6.15) https://launchpad.net/bugs/42149 From launchpad.net.tormod at xoxy.net Sun Apr 30 10:46:09 2006 From: launchpad.net.tormod at xoxy.net (Tormod Volden) Date: Sun, 30 Apr 2006 10:46:09 -0000 Subject: [Bug 42149] Re: USB devices are not powered off at shutdown (Dapper, 2.6.15) References: <20060430000107.30638.44365.malonedeb@gangotri.ubuntu.com> Message-ID: <20060430104609.16712.8144.launchpad@gandwana.ubuntu.com> ** Changed in: Ubuntu Sourcepackagename: None => linux-source-2.6.15 -- USB devices are not powered off at shutdown (Dapper, 2.6.15) https://launchpad.net/bugs/42149 From asraniel at fryx.ch Sun Apr 30 11:22:21 2006 From: asraniel at fryx.ch (Asraniel) Date: Sun, 30 Apr 2006 11:22:21 -0000 Subject: [Bug 42222] slow internet because of ipv6 References: <20060430112221.30606.42193.malonedeb@gangotri.ubuntu.com> Message-ID: <20060430112221.30606.42193.malonedeb@gangotri.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: for many people the internet is very slow because ipv6 is active. many people dont even know that its a bug! the workaround is here: https://wiki.ubuntu.com/WebBrowsingSlowIPv6IPv4 so i request that ipv6 is not active as default or that the bug gets fixed. -- slow internet because of ipv6 https://launchpad.net/bugs/42222 From bugs at mathrick.org Sun Apr 30 12:09:06 2006 From: bugs at mathrick.org (mathrick) Date: Sun, 30 Apr 2006 12:09:06 -0000 Subject: [Bug 42227] Default IO scheduler should be CFQ References: <20060430120906.30606.37421.malonedeb@gangotri.ubuntu.com> Message-ID: <20060430120906.30606.37421.malonedeb@gangotri.ubuntu.com> Public bug reported: Affects: linux-meta (Ubuntu) Severity: Normal Priority: (none set) Status: Unconfirmed Description: Default IO scheduler in linux, anticipatory, performs very bad under variety of "desktop" loads and can really kill the desktop. CFQ scheduler seems to behave much better, and is quite popular choice for those in the know. However, changing it is an extremely involved procedure. Thus the CONFIG_DEFAULT_IOSCHED should be set to CFQ to enable it out of the box. -- Default IO scheduler should be CFQ https://launchpad.net/bugs/42227 From emamo91 at gmail.com Sun Apr 30 12:15:56 2006 From: emamo91 at gmail.com (eMamo) Date: Sun, 30 Apr 2006 12:15:56 -0000 Subject: [Bug 41288] Re: espresso installer is'nt responding/crashes during the installation References: <20060425122622.28879.89682.malonedeb@gandwana.ubuntu.com> Message-ID: <20060430121556.30606.23870.malone@gangotri.ubuntu.com> yes, i tried and it returns that the CD is ok. (oh yeah, i started the live cd in vga mode, because of an old bug of the X driver "nv" with my video card, that makes the system crash, my vidoe card is nvidia geforce 4 440mx) -- espresso installer is'nt responding/crashes during the installation https://launchpad.net/bugs/41288 From samtygier at yahoo.co.uk Sun Apr 30 12:16:50 2006 From: samtygier at yahoo.co.uk (sam tygier) Date: Sun, 30 Apr 2006 12:16:50 -0000 Subject: [Bug 42227] Re: Default IO scheduler should be CFQ References: <20060430120906.30606.37421.malonedeb@gangotri.ubuntu.com> Message-ID: <20060430121650.16739.14433.malone@gandwana.ubuntu.com> can this not be chosen at boot time? there are instructions to do it http://www.ubuntuforums.org/showthread.php?t=119546 -- Default IO scheduler should be CFQ https://launchpad.net/bugs/42227 From geoff.hoff at gmail.com Sun Apr 30 12:24:43 2006 From: geoff.hoff at gmail.com (Geoff Hoff) Date: Sun, 30 Apr 2006 12:24:43 -0000 Subject: [Bug 34066] Re: usb mouse dead on resume References: <20060308112717.14318.84205.malonedeb@gangotri.ubuntu.com> Message-ID: <20060430122443.30638.1752.malone@gangotri.ubuntu.com> On my Fujitsu P7010 I had to add the usb modules to the MODULES_WHITELIST in /etc/default/acpi-support to get usb to work correctly after resuming from hibernate. The entry on my computer looks like: MODULES_WHITELIST="ehci_hcd uhci_hcd" -- usb mouse dead on resume https://launchpad.net/bugs/34066 From stian_web at jordet.nu Sun Apr 30 13:20:52 2006 From: stian_web at jordet.nu (Stian Jordet) Date: Sun, 30 Apr 2006 13:20:52 -0000 Subject: [Bug 41061] Re: aic7xxx fails to load References: <20060424090127.17643.31977.malonedeb@gandwana.ubuntu.com> Message-ID: <20060430132052.16712.79497.malone@gandwana.ubuntu.com> Indeed, 2.6.15-21-686 doesn't boot for me neither. Integrated dual aic7899. -- aic7xxx fails to load https://launchpad.net/bugs/41061 From jgiannakas at gmail.com Sun Apr 30 13:21:27 2006 From: jgiannakas at gmail.com (Ioannis) Date: Sun, 30 Apr 2006 13:21:27 -0000 Subject: [Bug 30984] Re: (Dapper) kernel 2.6.15.15-686 breaks freq scaling on core duo References: <20060209172346.25235.19539.malonedeb@gangotri.ubuntu.com> Message-ID: <20060430132127.16712.46291.malone@gandwana.ubuntu.com> 2.6.15-21-686 still breaks frequency scalling in Dothan processor on a Vaio VGN-FJ1S. With the default kernel, 2.6.15-20-386 it works fine. I am running dapper beta 2, kubuntu. -- (Dapper) kernel 2.6.15.15-686 breaks freq scaling on core duo https://launchpad.net/bugs/30984 From mh at tildemh.com Sun Apr 30 13:25:38 2006 From: mh at tildemh.com (Mark Howard) Date: Sun, 30 Apr 2006 13:25:38 -0000 Subject: [Bug 34066] Re: usb mouse dead on resume References: <20060308112717.14318.84205.malonedeb@gangotri.ubuntu.com> Message-ID: <20060430132538.30638.37273.malone@gangotri.ubuntu.com> Another confirmation. In my case the mouse works most of the time after hibernate but occasionally fails (~10% of the time). -- usb mouse dead on resume https://launchpad.net/bugs/34066 From jeremie.corbier at resel.enst-bretagne.fr Sun Apr 30 13:47:09 2006 From: jeremie.corbier at resel.enst-bretagne.fr (=?utf-8?b?SsOpcsOpbWllIENvcmJpZXI=?=) Date: Sun, 30 Apr 2006 13:47:09 -0000 Subject: [Bug 42222] Re: slow internet because of ipv6 References: <20060430112221.30606.42193.malonedeb@gangotri.ubuntu.com> Message-ID: <20060430134709.30638.21883.malone@gangotri.ubuntu.com> *** This bug is a duplicate of bug 24828 *** Thanks for your bug report. I'm closing it since it is a duplicate. Please add further comments to bug #24828. ** This bug has been marked a duplicate of bug 24828 can't not load ipv6 module ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Unconfirmed => Rejected -- slow internet because of ipv6 https://launchpad.net/bugs/42222 From bugs at mathrick.org Sun Apr 30 13:59:00 2006 From: bugs at mathrick.org (mathrick) Date: Sun, 30 Apr 2006 13:59:00 -0000 Subject: [Bug 42227] Re: Default IO scheduler should be CFQ References: <20060430120906.30606.37421.malonedeb@gangotri.ubuntu.com> Message-ID: <20060430135900.16712.84575.malone@gandwana.ubuntu.com> This doesn't really matter. This should be done, one way or another, by default. Otherwise it continues to be an extremely involved procedure, starting with "what the hell is an IO scheduler?" -- Default IO scheduler should be CFQ https://launchpad.net/bugs/42227 From plaur_27 at yahoo.de Sun Apr 30 14:25:49 2006 From: plaur_27 at yahoo.de (Laurentiu Pancescu) Date: Sun, 30 Apr 2006 14:25:49 -0000 Subject: [Bug 31527] Re: DRI locks up the machine when starting X on a Radeon 9250 References: <20060215163856.15884.24165.malonedeb@gangotri.ubuntu.com> Message-ID: <20060430142549.16712.55285.malone@gandwana.ubuntu.com> I can confirm this (Asus A7V133 and HIS Radeon 9250). gl-117 causes a hang within a few seconds, and some OpenGL screensavers as well (they shouldn't be randomly chosen on Radeons by the screensaver package, until this bug is fixed). Disabling dri removes the hangs, but 3D is very slow, about 3fps in gl-117. Setting the BusType option to PCI in xorg.conf also seems to avoid the hangs, but 3D is slow, too - about 6fps in gl-117. It looks like the problem is still in the current X.org: https://bugs.freedesktop.org/show_bug.cgi?id=5449 - the good news is that they are still trying to fix it. If the fix enters X.org CVS after Dapper release, will it become available as a Dapper update, evn if it's not, technically speaking, a security issue? -- DRI locks up the machine when starting X on a Radeon 9250 https://launchpad.net/bugs/31527 From lure.net at gmail.com Sun Apr 30 14:35:50 2006 From: lure.net at gmail.com (Luka Renko) Date: Sun, 30 Apr 2006 14:35:50 -0000 Subject: [Bug 40041] Re: suspend to disk is slow when running on batteries References: <20060418182945.21526.21428.malonedeb@gangotri.ubuntu.com> Message-ID: <20060430143550.30606.49846.launchpad@gangotri.ubuntu.com> *** This bug is a duplicate of bug 35213 *** ** This bug has been marked a duplicate of bug 35213 hibernate fails when not on AC power on HP Pavilion ZT3000 - regression from breezy -- suspend to disk is slow when running on batteries https://launchpad.net/bugs/40041 From lure.net at gmail.com Sun Apr 30 14:35:50 2006 From: lure.net at gmail.com (Luka Renko) Date: Sun, 30 Apr 2006 14:35:50 -0000 Subject: [Bug 35213] Re: hibernate fails when not on AC power on HP Pavilion ZT3000 - regression from breezy References: <20060316170910.6510.54248.malonedeb@gangotri.ubuntu.com> Message-ID: <20060430143550.30606.43906.launchpad@gangotri.ubuntu.com> ** Bug 40041 has been marked a duplicate of this bug -- hibernate fails when not on AC power on HP Pavilion ZT3000 - regression from breezy https://launchpad.net/bugs/35213 From rms at 1407.org Sun Apr 30 14:49:43 2006 From: rms at 1407.org (Cyclops) Date: Sun, 30 Apr 2006 14:49:43 -0000 Subject: [Bug 37370] Re: Crash/freeze when restarting networking, rt2570 wireless USB (DWL-G122, rev B1) References: <20060330180253.23733.49082.malonedeb@gandwana.ubuntu.com> Message-ID: <20060430144943.16712.15223.malone@gandwana.ubuntu.com> I have this problem too, and the only workaround I found out was keeping an open terminal with ping in order to let me easily understand when it stopped working and... ... as soon as I notice anything strange I unplug, restart network, and plug again. If it disconnects by itself for a certain period of time, then you're toast. A reboot will be required, but it won't even reboot cleanly. HOWEVER, I'm figuring it is a chipset/firmware problem. Why? Simple: a friend of mine also suffers from this problems... on Windows! He eventually threw away his usb stick and bought a PCMCIA version. Today I'm going to try the daily CVS snapshot of the beta driver of rt2x00. Last time I tried it compiled cleanly but wouldn't join the network or record wep key parameters. Oh, and ndiswrapper is _not_ the way to go. This driver is fully Free Software, so don't go for the proprietary version ;) -- Crash/freeze when restarting networking, rt2570 wireless USB (DWL-G122, rev B1) https://launchpad.net/bugs/37370 From john-ubuntu at fjellstad.org Sun Apr 30 15:40:10 2006 From: john-ubuntu at fjellstad.org (jfjellstad) Date: Sun, 30 Apr 2006 15:40:10 -0000 Subject: [Bug 36339] Re: USB mouse does not work if usbhid loaded before plugging in References: <20060324035730.5352.52525.malonedeb@gangotri.ubuntu.com> Message-ID: <20060430154010.30606.41162.malone@gangotri.ubuntu.com> I see the same problem here. The blacklisting usbhid workaround doesn't work here. I'm using a Logitech Bluetooth mouse/keyboard combo. When I blacklisted usbhid and enabled usbmouse and usbkbd, I couldn't get any response from my usb keyboard, and the usb mouse would only work in the vertical direction (up and down, no matter what I did with the mouse). -- USB mouse does not work if usbhid loaded before plugging in https://launchpad.net/bugs/36339 From j.beyer at web.de Sun Apr 30 16:07:51 2006 From: j.beyer at web.de (Joerg Beyer) Date: Sun, 30 Apr 2006 16:07:51 -0000 Subject: [Bug 41061] Re: aic7xxx fails to load References: <20060424090127.17643.31977.malonedeb@gandwana.ubuntu.com> Message-ID: <20060430160751.16739.97992.malone@gandwana.ubuntu.com> I also had the unknown symbols (as reported before) aic7xxx: Unknown symbol spi_populate_sync_msg aic7xxx: Unknown symbol spi_populate_width_msg aic7xxx: Unknown symbol spi_populate_ppr_msg with the daily snapshot from yesterday. I wanted to install on a scsii disk - obviousliy it fails. I will try the older flight6 cd now. -- aic7xxx fails to load https://launchpad.net/bugs/41061 From rms at 1407.org Sun Apr 30 16:22:25 2006 From: rms at 1407.org (Cyclops) Date: Sun, 30 Apr 2006 16:22:25 -0000 Subject: [Bug 37370] Re: Crash/freeze when restarting networking, rt2570 wireless USB (DWL-G122, rev B1) References: <20060330180253.23733.49082.malonedeb@gandwana.ubuntu.com> Message-ID: <20060430162225.30606.81938.malone@gangotri.ubuntu.com> Nah, it's still in the same state: Insert stick: [4296408.395000] usb 3-4: new high speed USB device using ehci_hcd and address 3[4296408.766000] wmaster0: Selected rate control algorithm 'simple' iwconfig wlan0 channel 6 (nothing new on dmesg) iwconfig wlan0 ap 00:04:E2:AB:86:3C (nothing new on dmesg) iwconfig wlan0 essid RMS [4296500.650000] wlan0: Initial auth_alg=0 [4296500.650000] wlan0: authenticate with AP 00:04:e2:ab:86:3c [4296500.850000] wlan0: authenticate with AP 00:04:e2:ab:86:3c [4296501.050000] wlan0: authenticate with AP 00:04:e2:ab:86:3c [4296501.250000] wlan0: authentication with AP 00:04:e2:ab:86:3c timed out iwconfig wlan0 enc ALSKJDLAKSDJLKASDJLASDASDD (nothing new on dmesg) iwconfig wlan0 ap 00:04:E2:AB:86:3C [4296538.719000] wlan0: Initial auth_alg=0 [4296538.719000] wlan0: authenticate with AP 00:04:e2:ab:86:3c [4296538.919000] wlan0: authenticate with AP 00:04:e2:ab:86:3c [4296539.119000] wlan0: authenticate with AP 00:04:e2:ab:86:3c [4296539.319000] wlan0: authentication with AP 00:04:e2:ab:86:3c timed out root at roque:~# iwconfig wlan0 wlan0 IEEE 802.11g ESSID:"RMS" Mode:Managed Frequency:2.437 GHz Access Point: 00:04:E2:AB:86:3C RTS thr:off Fragment thr=2346 B Encryption key:off root at roque:~# iwlist wlan0 scan wlan0 Scan completed : Cell 01 - Address: 00:04:E2:AB:86:3C ESSID:"" Mode:Master Frequency:2.437 GHz Encryption key:on Extra:tsf=000001df53f0d1de [4296678.580000] wlan0: starting scan [4296679.258000] wlan0: scan completed ifconfig wlan0 192.168.2.254 [4296726.185000] NET: Registered protocol family 17 iwconfig wlan0 enc ALSKJDLAKSDJLKASDJLASDASDD (nothing new on dmesg) iwconfig wlan0 ap 00:04:E2:AB:86:3C [4296772.569000] wlan0: Initial auth_alg=0 [4296772.569000] wlan0: authenticate with AP 00:04:e2:ab:86:3c [4296772.572000] wlan0: RX authentication from 00:04:e2:ab:86:3c (alg=0 transaction=2 status=0) [4296772.572000] wlan0: authenticated [4296772.572000] wlan0: associate with AP 00:04:e2:ab:86:3c [4296772.574000] wlan0: RX AssocResp from 00:04:e2:ab:86:3c (capab=0x31 status=0 aid=2) [4296772.574000] wlan0: associated rms at roque:~$ ping 192.168.2.1 PING 192.168.2.1 (192.168.2.1) 56(84) bytes of data. [4296831.286000] wmaster0ap: RX WEP frame with unknown keyidx 0 (A1=00:11:3b:03:9c:a7 A2=00:04:e2:ab:86:3c A3=00:04:e2:ab:86:3c) (no output from pink, although activity led blinks once per second) [4296891.304000] wmaster0ap: RX WEP frame with unknown keyidx 0 (A1=00:11:3b:03:9c:a7 A2=00:04:e2:ab:86:3c A3=00:04:e2:ab:86:3c) [4296951.325000] wmaster0ap: RX WEP frame with unknown keyidx 0 (A1=00:11:3b:03:9c:a7 A2=00:04:e2:ab:86:3c A3=00:04:e2:ab:86:3c) [4297011.321000] wmaster0ap: RX WEP frame with unknown keyidx 0 (A1=00:11:3b:03:9c:a7 A2=00:04:e2:ab:86:3c A3=00:04:e2:ab:86:3c) [4297071.320000] wmaster0ap: RX WEP frame with unknown keyidx 0 (A1=00:11:3b:03:9c:a7 A2=00:04:e2:ab:86:3c A3=00:04:e2:ab:86:3c) The USB stick looks like it's working (at least the leds blink in a similar manner as to when it is working effectively), but it's not, and that weird error message keeps popping up. I guess this is not working, yet. -- Crash/freeze when restarting networking, rt2570 wireless USB (DWL-G122, rev B1) https://launchpad.net/bugs/37370 From shuntasusuki at mac.com Sun Apr 30 16:23:19 2006 From: shuntasusuki at mac.com (Shunta) Date: Sun, 30 Apr 2006 16:23:19 -0000 Subject: [Bug 30963] Re: [dapper] snd_powermac does not recognize sound card References: <20060209122327.25235.98036.malonedeb@gangotri.ubuntu.com> Message-ID: <20060430162319.30638.16686.malone@gangotri.ubuntu.com> I tried theDapperBeta on my iBookG3 DualUSB. DapperBeta(ubuntu-6.06-beta) kernel-->2.6.15-20.30-powerpc alsa-base-->1.0.10-4ubuntu4 ibook:~$ cat /proc/cpuinfo processor : 0 cpu : 750CXe temperature : 11-13 C (uncalibrated) clock : 400.000000MHz revision : 34.21 (pvr 0008 2215) bogomips : 26.52 timebase : 16640000 machine : PowerBook4,1 motherboard : PowerBook4,1 PowerBook2,2 MacRISC2 MacRISC Power Macintosh detected as : 67 (iBook FireWire) pmac flags : 0000001f L2 cache : 256K unified pmac-generation : NewWorld ******************************* ibook:~$ lsmod | grep snd_ snd_powermac 56384 1 snd_pcm_oss 68480 0 snd_mixer_oss 23072 1 snd_pcm_oss snd_pcm 109860 2 snd_powermac,snd_pcm_oss snd_timer 29156 1 snd_pcm snd 72532 7 snd_powermac,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer snd_page_alloc 12424 1 snd_pcm ibook:~$ cat /proc/asound/cards 0 [Tumbler ]: PMac Tumbler - PowerMac Tumbler PowerMac Tumbler (Dev 16) Sub-frame 0 ibook:~$ aplay -l **** HARDWARE DEVICE PLAYBACK LIST **** CARD 0: Tumbler [PowerMac Tumbler], DEVICE 0: PMac Tumbler [PowerMac Tumbler] SUB DEVICE: 1/1 subdevice #0: subdevice #0 So the module is loaded, but doesn't pick up the audio card. -- [dapper] snd_powermac does not recognize sound card https://launchpad.net/bugs/30963 From ubuntu at treblig.org Sun Apr 30 16:34:55 2006 From: ubuntu at treblig.org (Dave Gilbert) Date: Sun, 30 Apr 2006 16:34:55 -0000 Subject: [Bug 16454] Re: sound still comes out of speakers when PCM volume is set to 0 References: <20060113134639.21012.49160.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060430163455.16739.61410.malone@gandwana.ubuntu.com> Happens on Dapper 2.6.15-21-k7 It mutes it if it is actually 'off' but if it is just at 0 but on then you still hear it; note one confusion is that the Gnome Volume Applet shows its mute symbol and ticks its 'mute' menu item when you drag the volume down to 0, but in this case still leaves the output 'on'. dg at gallifrey:~$ cat /proc/asound/cards 0 [AudioPCI ]: ENS1371 - Ensoniq AudioPCI Ensoniq AudioPCI ENS1371 at 0x1080, irq 177 dg at gallifrey:~$ amixer Simple mixer control 'Master',0 Capabilities: pvolume pswitch pswitch-joined Playback channels: Front Left - Front Right Limits: Playback 0 - 31 Mono: Front Left: Playback 0 [0%] [on] Front Right: Playback 0 [0%] [on] Simple mixer control 'Master Mono',0 Capabilities: pvolume pvolume-joined pswitch pswitch-joined Playback channels: Mono Limits: Playback 0 - 31 Mono: Playback 16 [52%] [on] Simple mixer control 'PCM',0 Capabilities: pvolume pswitch pswitch-joined Playback channels: Front Left - Front Right Limits: Playback 0 - 31 Mono: Front Left: Playback 16 [52%] [on] Front Right: Playback 16 [52%] [on] Simple mixer control 'PCM Out Path & Mute',0 Capabilities: enum Items: 'pre 3D' 'post 3D' Item0: 'pre 3D' Simple mixer control 'Line',0 Capabilities: pvolume pswitch pswitch-joined cswitch cswitch-joined cswitch-ex clusive Capture exclusive group: 0 Playback channels: Front Left - Front Right Capture channels: Front Left - Front Right Limits: Playback 0 - 31 Front Left: Playback 0 [0%] [off] Capture [off] Front Right: Playback 0 [0%] [off] Capture [off] Simple mixer control 'Line In->Rear Out',0 Capabilities: pswitch pswitch-joined Playback channels: Mono Mono: Playback [off] Simple mixer control 'CD',0 Capabilities: pvolume pswitch pswitch-joined cswitch cswitch-joined cswitch-ex clusive Capture exclusive group: 0 Playback channels: Front Left - Front Right Capture channels: Front Left - Front Right Limits: Playback 0 - 31 Front Left: Playback 25 [81%] [on] Capture [off] Front Right: Playback 25 [81%] [on] Capture [off] Simple mixer control 'Mic',0 Capabilities: pvolume pvolume-joined pswitch pswitch-joined cswitch cswitch-jo ined cswitch-exclusive Capture exclusive group: 0 Playback channels: Mono Capture channels: Front Left - Front Right Limits: Playback 0 - 31 Mono: Playback 0 [0%] [off] Front Left: Capture [on] Front Right: Capture [on] Simple mixer control 'Mic Boost (+20dB)',0 Capabilities: pswitch pswitch-joined Playback channels: Mono Mono: Playback [off] Simple mixer control 'Mic Select',0 Capabilities: enum Items: 'Mic1' 'Mic2' Item0: 'Mic1' Simple mixer control 'Video',0 Capabilities: pvolume pswitch pswitch-joined cswitch cswitch-joined cswitch-ex clusive Capture exclusive group: 0 Playback channels: Front Left - Front Right Capture channels: Front Left - Front Right Limits: Playback 0 - 31 Front Left: Playback 0 [0%] [off] Capture [off] Front Right: Playback 0 [0%] [off] Capture [off] Simple mixer control 'Phone',0 Capabilities: pvolume pvolume-joined pswitch pswitch-joined cswitch cswitch-jo ined cswitch-exclusive Capture exclusive group: 0 Playback channels: Mono Capture channels: Front Left - Front Right Limits: Playback 0 - 31 Mono: Playback 0 [0%] [off] Front Left: Capture [off] Front Right: Capture [off] Simple mixer control 'IEC958',0 Capabilities: pswitch pswitch-joined Playback channels: Mono Mono: Playback [off] Simple mixer control 'PC Speaker',0 Capabilities: pvolume pvolume-joined pswitch pswitch-joined Playback channels: Mono Limits: Playback 0 - 15 Mono: Playback 9 [60%] [on] Simple mixer control 'Aux',0 Capabilities: pvolume pswitch pswitch-joined cswitch cswitch-joined cswitch-ex clusive Capture exclusive group: 0 Playback channels: Front Left - Front Right Capture channels: Front Left - Front Right Limits: Playback 0 - 31 Front Left: Playback 23 [74%] [on] Capture [off] Front Right: Playback 23 [74%] [on] Capture [off] Simple mixer control 'Mono Output Select',0 Capabilities: enum Items: 'Mix' 'Mic' Item0: 'Mix' Simple mixer control 'Capture',0 Capabilities: cvolume cswitch cswitch-joined Capture channels: Front Left - Front Right Limits: Capture 0 - 15 Front Left: Capture 0 [0%] [off] Front Right: Capture 0 [0%] [off] Simple mixer control 'Mix',0 Capabilities: cswitch cswitch-joined cswitch-exclusive Capture exclusive group: 0 Capture channels: Front Left - Front Right Front Left: Capture [off] Front Right: Capture [off] Simple mixer control 'Mix Mono',0 Capabilities: cswitch cswitch-joined cswitch-exclusive Capture exclusive group: 0 Capture channels: Front Left - Front Right Front Left: Capture [off] Front Right: Capture [off] Simple mixer control 'External Amplifier',0 Capabilities: pswitch pswitch-joined Playback channels: Mono Mono: Playback [on] -- sound still comes out of speakers when PCM volume is set to 0 https://launchpad.net/bugs/16454 From crimsun at fungus.sh.nu Sun Apr 30 17:19:00 2006 From: crimsun at fungus.sh.nu (Daniel T Chen) Date: Sun, 30 Apr 2006 17:19:00 -0000 Subject: [Bug 16454] Re: sound still comes out of speakers when PCM volume is set to 0 References: <20060113134639.21012.49160.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060430171900.30638.78466.malone@gangotri.ubuntu.com> (Please do not inline your amixer output; doing so makes the output virtually illegible using this Web interface.) For those of you using gnome's volume control to control the Master/PCM sliders, you should either manually untick the (un)mute icon at the bottom of each slider, or file a bug against the gnome-media source package. Additionally, there are quite a few amixer outputs above that show that both Master and PCM are _not_ muted. This is intentional. Muting PCM does not automatically imply that _all_ output should be muted. -- sound still comes out of speakers when PCM volume is set to 0 https://launchpad.net/bugs/16454 From samtygier at yahoo.co.uk Sun Apr 30 17:22:36 2006 From: samtygier at yahoo.co.uk (sam tygier) Date: Sun, 30 Apr 2006 17:22:36 -0000 Subject: [Bug 40731] Re: wont resume with rt2500 on powerbook References: <20060422104357.30538.4454.malonedeb@gangotri.ubuntu.com> Message-ID: <20060430172236.30638.45649.malone@gangotri.ubuntu.com> seems to have stopped happening, so marking as fixed. i'll reopen if it comes back ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Unconfirmed => Fix Released -- wont resume with rt2500 on powerbook https://launchpad.net/bugs/40731 From mjg59 at codon.org.uk Sun Apr 30 18:44:13 2006 From: mjg59 at codon.org.uk (Matthew Garrett) Date: Sun, 30 Apr 2006 18:44:13 -0000 Subject: [Bug 35213] Re: hibernate fails when not on AC power on HP Pavilion ZT3000 - regression from breezy References: <20060316170910.6510.54248.malonedeb@gangotri.ubuntu.com> Message-ID: <20060430184413.16739.43955.malone@gandwana.ubuntu.com> Should be fixed with the latest laptop-mode-tools upload ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Confirmed => Fix Released -- hibernate fails when not on AC power on HP Pavilion ZT3000 - regression from breezy https://launchpad.net/bugs/35213 From bjorn at ambientchill.com Sun Apr 30 19:38:45 2006 From: bjorn at ambientchill.com (Bjorn Tipling) Date: Sun, 30 Apr 2006 19:38:45 -0000 Subject: [Bug 42160] [Dapper] Shut Down Process Hangs References: <20060430010556.16712.32800.malonedeb@gandwana.ubuntu.com> Message-ID: <20060430193845.30638.7109.launchpad@canonical@gangotri.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Needs Info Description: I can reboot okay, but when I shut down the computer it goes through and I see the shutting down screen and it gets to the very end of everything (I think - the progress bar is at the end) and it just hangs there and my computer never shuts down. I have an ASUS P5GD1 motherboard. -- [Dapper] Shut Down Process Hangs https://launchpad.net/bugs/42160 From mustard5 at iprimus.com.au Sun Apr 30 19:35:08 2006 From: mustard5 at iprimus.com.au (Mustard) Date: Sun, 30 Apr 2006 19:35:08 -0000 Subject: [Bug 22317] Re: cdrom_pc_intr: The drive appears confused (ireason = 0x01) References: <20060113141739.21012.5635.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060430193508.30638.53931.malone@gangotri.ubuntu.com> I'm getting this error myself while using the irqpoll option on a Breezy kernel 2.6.12-10-386. I started using the irqpoll option after a BIOS upgrade in which all my BIOS options went back to default. Upon booting up I was hit with another issue, which was a repeating 'drum beat' sound at the gdm login screen. I noticed a lot of irq related issues in the logs, so I fiddled around with pci=routeirq, noapic, nolapic, acpi=off and whatever kernel options I could think of, eventually finding the irqpoll was the only one that would get me to gdm login without getting stuck with this infinitely repeating 'drum beat' noise. Since using irqpoll, I have started noticing this 'hdc: cdrom_pc_intr: The drive appears confused (ireason = 0x01)' error and have had problems with the machine hanging when attempting to read a CD, and various writing issues when burning ISO's. My hardware is below.. description: Desktop Computer product: Uknown vendor: SOLTEK version: 1.0 serial: 00000000 width: 32 bits capabilities: smbios-2.3 dmi-2.3 configuration: chassis=desktop *-core description: Motherboard product: Uknown vendor: SOLTEK physical id: 0 version: 1.0 serial: 00000000 slot: PCI2 *-firmware description: BIOS vendor: American Megatrends Inc. physical id: 0 version: Version 07.00T (04/02/01) size: 64KB capacity: 192KB capabilities: isa pci pnp apm upgrade shadowing escd cdboot bootselect socketedrom edd int13floppy360 int13floppy1200 int13floppy720 int13floppy2880 int5printscreen int9keyboard int17printer int10video acpi usb agp ls120boot zipboot biosbootspecification *-cpu description: CPU product: AMD Athlon(tm) XP 2200+ vendor: Advanced Micro Devices [AMD] physical id: 4 bus info: cpu at 0 version: 6.8.0 slot: Socket-A size: 1800MHz capacity: 3GHz width: 32 bits clock: 133MHz capabilities: fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 mmx fxsr sse syscall mmxext 3dnowext 3dnow *-cache:0 description: L1 cache physical id: 5 slot: Internal Cache size: 128KB capacity: 1MB capabilities: synchronous internal write-back unified *-cache:1 description: L2 cache physical id: 6 slot: Internal Cache size: 256KB capacity: 1MB capabilities: synchronous internal write-back unified *-memory description: System memory physical id: 1 size: 511MB *-pci description: Host bridge product: VT8377 [KT400/KT600 AGP] Host Bridge vendor: VIA Technologies, Inc. physical id: e0000000 bus info: pci at 00:00.0 version: 00 width: 32 bits clock: 66MHz resources: iomemory:e0000000-e3ffffff *-pci description: PCI bridge product: VT8235 PCI Bridge vendor: VIA Technologies, Inc. physical id: 1 bus info: pci at 00:01.0 version: 00 width: 32 bits clock: 66MHz capabilities: pci normal_decode bus_master cap_list *-display description: VGA compatible controller product: NV34 [GeForce FX 5200] vendor: nVidia Corporation physical id: 0 bus info: pci at 01:00.0 version: a1 size: 128MB width: 32 bits clock: 66MHz capabilities: vga bus_master cap_list configuration: driver=nvidia resources: iomemory:de000000-deffffff iomemory:d0000000-d7ffffff irq:16 *-multimedia description: Multimedia audio controller product: 5880 AudioPCI vendor: Ensoniq physical id: a bus info: pci at 00:0a.0 version: 02 width: 32 bits clock: 33MHz capabilities: bus_master cap_list configuration: driver=ENS1371 resources: ioport:ec00-ec3f irq:18 *-usb:0 description: USB Controller product: VT82xxxxx UHCI USB 1.1 Controller vendor: VIA Technologies, Inc. physical id: 10 bus info: pci at 00:10.0 version: 80 width: 32 bits clock: 33MHz capabilities: uhci bus_master cap_list configuration: driver=uhci_hcd resources: ioport:e800-e81f irq:21 *-usbhost product: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller vendor: Linux 2.6.12-10-386 uhci_hcd physical id: 1 bus info: usb at 1 logical name: usb1 version: 2.06 capabilities: usb-1.10 configuration: driver=hub maxpower=0mA slots=2 speed=12.0MB/s *-usb description: Mouse product: USB-PS/2 Optical Mouse vendor: B16_b_02 physical id: 2 bus info: usb at 1:2 version: 98.02 capabilities: usb-2.00 configuration: driver=usbhid maxpower=98mA speed=1.5MB/s *-usb:1 description: USB Controller product: USB 2.0 vendor: VIA Technologies, Inc. physical id: 10.3 bus info: pci at 00:10.3 version: 82 width: 32 bits clock: 33MHz capabilities: ehci bus_master cap_list configuration: driver=ehci_hcd resources: iomemory:dfffff00-dfffffff irq:21 *-usbhost product: VIA Technologies, Inc. USB 2.0 vendor: Linux 2.6.12-10-386 ehci_hcd physical id: 1 bus info: usb at 2 logical name: usb2 version: 2.06 capabilities: usb-2.00 configuration: driver=hub maxpower=0mA slots=2 speed=480.0MB/s *-usb description: Mass storage device product: USB TO IDE vendor: Genesys Logic, Inc. physical id: 1 bus info: usb at 2:1 logical name: scsi0 version: 0.33 capabilities: usb-2.00 scsi emulated scsi-host configuration: driver=usb-storage maxpower=96mA speed=480.0MB/s *-disk description: SCSI Disk product: DK14FA-20 vendor: HITACHI_ physical id: 0.0.0 bus info: scsi at 0.0:0.0 logical name: /dev/sda version: 0811 size: 18GB *-isa UNCLAIMED description: ISA bridge product: VT8235 ISA Bridge vendor: VIA Technologies, Inc. physical id: 11 bus info: pci at 00:11.0 version: 00 width: 32 bits clock: 33MHz capabilities: isa bus_master cap_list *-ide description: IDE interface product: VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE vendor: VIA Technologies, Inc. physical id: 11.1 bus info: pci at 00:11.1 version: 06 width: 32 bits clock: 33MHz capabilities: ide bus_master cap_list configuration: driver=VIA_IDE resources: ioport:fc00-fc0f irq:255 *-ide:0 description: IDE Channel 0 physical id: 0 bus info: ide at 0 logical name: ide0 clock: 33MHz *-disk:0 description: ATA Disk product: ST380011A vendor: Seagate physical id: 0 bus info: ide at 0.0 logical name: /dev/hda version: 8.01 serial: 5JVTH6B9 size: 74GB capacity: 74GB capabilities: ata dma lba iordy smart security pm configuration: mode=udma5 smart=on *-disk:1 description: ATA Disk product: ST3802110A vendor: Seagate physical id: 1 bus info: ide at 0.1 logical name: /dev/hdb version: 3.AAE serial: 4LR0N15G size: 74GB capacity: 74GB capabilities: ata dma lba iordy smart security pm configuration: mode=udma5 smart=on *-ide:1 description: IDE Channel 1 physical id: 1 bus info: ide at 1 logical name: ide1 clock: 33MHz *-cdrom description: DVD writer product: LITE-ON DVDRW SOHW-1693S physical id: 0 bus info: ide at 1.0 logical name: /dev/hdc version: KS04 capabilities: packet atapi cdrom removable nonmagnetic dma lba iordy audio cd-r cd-rw dvd dvd-r -- cdrom_pc_intr: The drive appears confused (ireason = 0x01) https://launchpad.net/bugs/22317 From launchpad.net.tormod at xoxy.net Sun Apr 30 19:38:44 2006 From: launchpad.net.tormod at xoxy.net (Tormod Volden) Date: Sun, 30 Apr 2006 19:38:44 -0000 Subject: [Bug 42160] Re: [Dapper] Shut Down Process Hangs References: <20060430010556.16712.32800.malonedeb@gandwana.ubuntu.com> Message-ID: <20060430193845.30638.88289.malone@gangotri.ubuntu.com> Thanks, can you please run "sudo dmidecode >dmidecode.out" and attach the resulting file dmidecode.out? ** Changed in: Ubuntu Sourcepackagename: None => linux-source-2.6.15 ** Summary changed: - [Dapper] Shut Down Process Hangs + [Dapper] Shut Down won't power off -- [Dapper] Shut Down won't power off https://launchpad.net/bugs/42160 From mustard5 at iprimus.com.au Sun Apr 30 19:42:04 2006 From: mustard5 at iprimus.com.au (Mustard) Date: Sun, 30 Apr 2006 19:42:04 -0000 Subject: [Bug 22317] Re: cdrom_pc_intr: The drive appears confused (ireason = 0x01) References: <20060113141739.21012.5635.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060430194204.16739.1842.malone@gandwana.ubuntu.com> I would add that googling around I have found quite a few threads on this subject which make me wonder whether its a kernel issue version issue, as it seems to be happening with other versions of linux. Not being too experienced with tracking down bugs I'm at a bit of a loss though. :) -- cdrom_pc_intr: The drive appears confused (ireason = 0x01) https://launchpad.net/bugs/22317 From samael at ugcc.org.ua Sun Apr 30 20:14:31 2006 From: samael at ugcc.org.ua (samael) Date: Sun, 30 Apr 2006 20:14:31 -0000 Subject: [Bug 35295] kernel-2.6.15 panic (AMD64 3000+ on K8N4-E Delux motherboard) References: <20060317092117.11105.99193.malonedeb@gandwana.ubuntu.com> Message-ID: <20060430201431.16712.4740.launchpad@canonical@gandwana.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Critical Priority: High Status: Unconfirmed Description: In Ubuntu 5.04 & 5.10 everythink was great!! But, I try Dapper (F4, F5... daily) On my motherboard I find this problems: No Sound, No ethernet, Mouse crash & sometimes kernel panic I submit it on kernel.org: http://bugzilla.kernel.org/show_bug.cgi?id=6192 I love Ubuntu! Please, help with my hardware!!! Because, for a week my LinuxBox is down! :( -- kernel-2.6.15 panic (AMD64 3000+ on K8N4-E Delux motherboard) https://launchpad.net/bugs/35295 From mjg59 at codon.org.uk Sun Apr 30 20:13:14 2006 From: mjg59 at codon.org.uk (Matthew Garrett) Date: Sun, 30 Apr 2006 20:13:14 -0000 Subject: [Bug 42012] Re: Kernel panic using fglrx drivers References: <20060429081813.29040.23887.malonedeb@gandwana.ubuntu.com> Message-ID: <20060430201315.30638.23056.malone@gangotri.ubuntu.com> The failure path seems to be fglrx related - we don't have the source code to this available, and as such fixing the bug is near impossible. ** Changed in: linux-source-2.6.15 linux-image-2.6.15-21-686 (Ubuntu) Severity: Critical => Normal Priority: High => Low -- Kernel panic using fglrx drivers https://launchpad.net/bugs/42012 From mjg59 at codon.org.uk Sun Apr 30 20:14:03 2006 From: mjg59 at codon.org.uk (Matthew Garrett) Date: Sun, 30 Apr 2006 20:14:03 -0000 Subject: [Bug 40282] Re: scp transfer causes system to freeze References: <20060420080529.8495.88291.malonedeb@gandwana.ubuntu.com> Message-ID: <20060430201403.30638.93773.launchpad@gangotri.ubuntu.com> ** Changed in: linux-meta linux-image-2.6-386 (Ubuntu) Sourcepackagename: linux-meta => linux-source-2.6.15 Binarypackagename: linux-image-2.6-386 => None -- scp transfer causes system to freeze https://launchpad.net/bugs/40282 From yogich at sc2000.net Sun Apr 30 20:23:58 2006 From: yogich at sc2000.net (CH) Date: Sun, 30 Apr 2006 20:23:58 -0000 Subject: [Bug 35776] Flashdisk not a valid device References: <20060320213422.8118.14081.malonedeb@gandwana.ubuntu.com> Message-ID: <20060430202358.16739.2877.launchpad@canonical@gandwana.ubuntu.com> Public bug reported: Affects: linux-source-2.6.15 (Ubuntu) Severity: Normal Priority: (none set) Status: Confirmed Description: After upgrading Breezy to Dapper 6.06 the PCMCIA flash disk is not a valid device, according to the kernel logs when booting kernel-2.6.15-18-386. When kernel-2.6.12-10-386 is used the flash disk becomes a valid device and mounts. >From Kernel-2.6.15-18 logs on boot: Mar 20 11:28:20 kubuntu kernel: [4294699.499000] Linux Kernel Card Services Mar 20 11:28:20 kubuntu kernel: [4294699.499000] options: [pci] [cardbus] [pm] Mar 20 11:28:20 kubuntu kernel: [4294699.512000] PCI: Enabling device 0000:00:0a.0 (0005 -> 0007) Mar 20 11:28:20 kubuntu kernel: [4294699.512000] ACPI: PCI Interrupt Link [LNK5] enabled at IRQ 11 Mar 20 11:28:20 kubuntu kernel: [4294699.512000] PCI: setting IRQ 11 as level-triggered Mar 20 11:28:20 kubuntu kernel: [4294699.512000] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LNK5] -> GSI 11 (level, low) -> IRQ 11 Mar 20 11:28:20 kubuntu kernel: [4294699.512000] Yenta: CardBus bridge found at 0000:00:0a.0 [103c:0850] Mar 20 11:28:20 kubuntu kernel: [4294699.512000] Yenta O2: res at 0x94/0xD4: 00/ea Mar 20 11:28:20 kubuntu kernel: [4294699.512000] Yenta O2: enabling read prefetch/write burst Mar 20 11:28:20 kubuntu kernel: [4294699.633000] Yenta: ISA IRQ mask 0x0438, PCI irq 11 Mar 20 11:28:20 kubuntu kernel: [4294699.633000] Socket status: 30000811 Mar 20 11:28:20 kubuntu kernel: [4294700.382000] cs: IO port probe 0x100-0x4ff: clean. Mar 20 11:28:20 kubuntu kernel: [4294700.386000] cs: IO port probe 0xc00-0xcf7: clean. Mar 20 11:28:20 kubuntu kernel: [4294700.386000] cs: IO port probe 0xa00-0xaff: clean. Mar 20 11:28:20 kubuntu kernel: [4294700.490000] cs: memory probe 0xa0000000-0xa0ffffff: clean. Mar 20 11:28:20 kubuntu kernel: [4294701.049000] hde: SanDisk SDCFB-8, CFA DISK drive Mar 20 11:28:20 kubuntu kernel: [4294701.661000] ide2 at 0x100-0x107,0x10e on irq 3 Mar 20 11:28:20 kubuntu kernel: [4294701.661000] hde: max request size: 128KiB Mar 20 11:28:20 kubuntu kernel: [4294701.661000] hde: 15680 sectors (8 MB) w/1KiB Cache, CHS=245/2/32 Mar 20 11:28:20 kubuntu kernel: [4294701.661000] hde: cache flushes not supported Mar 20 11:28:20 kubuntu kernel: [4294701.661000] /dev/ide/host2/bus0/target0/lun0: p1 Mar 20 11:28:20 kubuntu kernel: [4294701.666000] ide-cs: hde: Vcc = 3.3, Vpp = 0.0 >From the kernel logs on mount attempt: Mar 20 11:29:25 kubuntu kernel: [4294770.306000] ide: failed opcode was: 0xec Mar 20 11:29:25 kubuntu kernel: [4294770.317000] /dev/ide/host2/bus0/target0/lun0: p1 Mar 20 11:29:25 kubuntu kernel: [4294770.324000] /dev/ide/host2/bus0/target0/lun0: p1 Mar 20 11:29:25 kubuntu kernel: [4294770.328000] hde: drive_cmd: status=0x51 { DriveReady SeekComplete Error } Mar 20 11:29:25 kubuntu kernel: [4294770.328000] hde: drive_cmd: error=0x04 { DriveStatusError } Mar 20 11:29:25 kubuntu kernel: [4294770.328000] ide: failed opcode was: 0xef Note: the original reporter indicated the bug was in package 'kernel-image-2.6.15-16-386-di'; however, that package was not published in Ubuntu. -- Flashdisk not a valid device https://launchpad.net/bugs/35776 From mjg59 at codon.org.uk Sun Apr 30 20:15:26 2006 From: mjg59 at codon.org.uk (Matthew Garrett) Date: Sun, 30 Apr 2006 20:15:26 -0000 Subject: [Bug 35295] Re: kernel-2.6.15 panic (AMD64 3000+ on K8N4-E Delux motherboard) References: <20060317092117.11105.99193.malonedeb@gandwana.ubuntu.com> Message-ID: <20060430201526.30606.86167.malone@gangotri.ubuntu.com> Bugzilla claims this was fixed with a new bios, so doesn't sound like it was an Ubuntu bug. Thanks for the report! ** Changed in: Ubuntu Sourcepackagename: None => linux-source-2.6.15 ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Unconfirmed => Rejected -- kernel-2.6.15 panic (AMD64 3000+ on K8N4-E Delux motherboard) https://launchpad.net/bugs/35295 From mjg59 at codon.org.uk Sun Apr 30 20:25:15 2006 From: mjg59 at codon.org.uk (Matthew Garrett) Date: Sun, 30 Apr 2006 20:25:15 -0000 Subject: [Bug 35776] Re: Flashdisk not a valid device References: <20060320213422.8118.14081.malonedeb@gandwana.ubuntu.com> Message-ID: <20060430202515.30638.36403.malone@gangotri.ubuntu.com> Ok, I'm not able to reproduce this. Luis, could you attach dmesg from a failed attempt? Also, how big is the card? ** Changed in: linux (Ubuntu) Sourcepackagename: linux => linux-source-2.6.15 Status: Unconfirmed => Confirmed -- Flashdisk not a valid device https://launchpad.net/bugs/35776 From martin at hyperion.ath.cx Sun Apr 30 20:27:21 2006 From: martin at hyperion.ath.cx (martinp) Date: Sun, 30 Apr 2006 20:27:21 -0000 Subject: [Bug 42012] Re: Kernel panic using fglrx drivers References: <20060429081813.29040.23887.malonedeb@gandwana.ubuntu.com> Message-ID: <20060430202721.30638.76254.malone@gangotri.ubuntu.com> Well, the hibernate-problem might be fglrx-related although it worked in a prior release. As of the kernel panic I don't agree with you, because -19 works and -21 does not. Both are from 2.6.15-sources. The question is: What has been integrated into -21 which is not in -19? It it was fglrx-related the whole micro-version would be affected, which is not the case. -- Kernel panic using fglrx drivers https://launchpad.net/bugs/42012 From luis.villa at gmail.com Sun Apr 30 20:44:17 2006 From: luis.villa at gmail.com (Luis Villa) Date: Sun, 30 Apr 2006 20:44:17 -0000 Subject: [Bug 35776] Re: Flashdisk not a valid device References: <20060320213422.8118.14081.malonedeb@gandwana.ubuntu.com> Message-ID: <20060430204417.16712.37537.malone@gandwana.ubuntu.com> Something in the latest kernel must have fixed it- it wasn't working Thursday, and is now. Grr. But glad it appears to be fixed. [A 0.5G card, FWIW.] -- Flashdisk not a valid device https://launchpad.net/bugs/35776 From bjorn at ambientchill.com Sun Apr 30 20:45:31 2006 From: bjorn at ambientchill.com (Bjorn Tipling) Date: Sun, 30 Apr 2006 20:45:31 -0000 Subject: [Bug 42160] Re: [Dapper] Shut Down won't power off References: <20060430010556.16712.32800.malonedeb@gandwana.ubuntu.com> Message-ID: <20060430204531.30606.30460.launchpad@gangotri.ubuntu.com> ** Attachment added: "dmidecode.out" http://librarian.launchpad.net/2421242/dmidecode.out -- [Dapper] Shut Down won't power off https://launchpad.net/bugs/42160 From tas50 at humboldt.edu Sun Apr 30 20:46:54 2006 From: tas50 at humboldt.edu (tas50) Date: Sun, 30 Apr 2006 20:46:54 -0000 Subject: [Bug 24270] Re: Screen flickering References: <20060113142814.21012.74045.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060430204654.16739.47172.malone@gandwana.ubuntu.com> My LCD screen was flickering quite a bit when Ubuntu had the horizontal sync rate completely wrong. Check your xorg.conf against the specs of the screen to make sure it got it right. -- Screen flickering https://launchpad.net/bugs/24270 From luis.villa at gmail.com Sun Apr 30 20:56:15 2006 From: luis.villa at gmail.com (Luis Villa) Date: Sun, 30 Apr 2006 20:56:15 -0000 Subject: [Bug 35776] Re: Flashdisk not a valid device References: <20060320213422.8118.14081.malonedeb@gandwana.ubuntu.com> Message-ID: <20060430205615.30638.11248.malone@gangotri.ubuntu.com> Believe this is fixed, at least here, though would love to have confirmation from other reporters. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Confirmed => Fix Released -- Flashdisk not a valid device https://launchpad.net/bugs/35776 From maximilian.kossick+ubuntu at googlemail.com Sun Apr 30 21:04:03 2006 From: maximilian.kossick+ubuntu at googlemail.com (Maximilian Kossick) Date: Sun, 30 Apr 2006 21:04:03 -0000 Subject: [Bug 26386] Re: no sound after resuming from suspend References: <20060113144917.21012.10985.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060430210403.16712.50296.launchpad@gandwana.ubuntu.com> *** This bug is a duplicate of bug 21574 *** ** This bug has been marked a duplicate of bug 21574 sound gone after resuming from sleep on hp nx8220 -- no sound after resuming from suspend https://launchpad.net/bugs/26386 From maximilian.kossick+ubuntu at googlemail.com Sun Apr 30 21:04:03 2006 From: maximilian.kossick+ubuntu at googlemail.com (Maximilian Kossick) Date: Sun, 30 Apr 2006 21:04:03 -0000 Subject: [Bug 21574] Re: sound gone after resuming from sleep on hp nx8220 References: <20060113141334.21012.43238.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060430210403.16712.689.launchpad@gandwana.ubuntu.com> ** Bug 26386 has been marked a duplicate of this bug -- sound gone after resuming from sleep on hp nx8220 https://launchpad.net/bugs/21574 From email.ahmedkamal at gmail.com Sun Apr 30 21:06:37 2006 From: email.ahmedkamal at gmail.com (Ahmed Kamal) Date: Sun, 30 Apr 2006 21:06:37 -0000 Subject: [Bug 40282] Re: scp transfer causes system to freeze References: <20060420080529.8495.88291.malonedeb@gandwana.ubuntu.com> Message-ID: <20060430210637.16739.94448.malone@gandwana.ubuntu.com> Happens to me too, except that my system doesnt freeze, but raher the networking subsystem becomes totally broken. Here is what happens: 1- I try to scp some tgz file to a server 2- It copies around 2% of the 250MB file (Zimbra collaboration suite) 3- It stops copying 4- I kill scp 5- Now whatever I do (ifconfig, dhclient, knetworkmanager ...) I cannot get back on the network. I get IPs, but I can't reach any other machine!! It was too weird. 6- Finally networking worked, only when I rebooted 7- BTW, I repeated the same situation again before I started doubting dapper and made the scp from Suse10 This seems really critical bug One last thing my driver is sky2, on a toshiba A105-S361 laptop -- scp transfer causes system to freeze https://launchpad.net/bugs/40282 From samtygier at yahoo.co.uk Sun Apr 30 21:47:17 2006 From: samtygier at yahoo.co.uk (sam tygier) Date: Sun, 30 Apr 2006 21:47:17 -0000 Subject: [Bug 31437] Re: squashfs needs to update to v3 to fix oops on ppc References: <20060214205545.24408.1179.malonedeb@gandwana.ubuntu.com> Message-ID: <20060430214717.16739.15543.malone@gandwana.ubuntu.com> i am no longer seeing this oops on my powerbook with current live cds ** Changed in: squashfs squashfs-tools (Ubuntu) Status: Unconfirmed => Fix Released -- squashfs needs to update to v3 to fix oops on ppc https://launchpad.net/bugs/31437 From robzon at kapati.net Sun Apr 30 22:02:00 2006 From: robzon at kapati.net (Robert Nasiadek) Date: Sun, 30 Apr 2006 22:02:00 -0000 Subject: [Bug 37056] Re: There should be several nVIDIA driver packages References: <20060328193442.6253.19683.malonedeb@gandwana.ubuntu.com> Message-ID: <20060430220200.16712.13267.malone@gandwana.ubuntu.com> My situation: I have a NVidia card and atheros wlan card. I need to manually upgrade madwifi to madwifi-ng, because madwifi doesn't support my card. But this breaks the package, and after reinstall/upgrade of kernel-restricted-modules I have to reinstall madwifi-ng. Ugly! Solution #1: split up linux-restricted-modules Solution #2: switch to madwifi-ng drivers by default :-) -- There should be several nVIDIA driver packages https://launchpad.net/bugs/37056 From siretart at tauware.de Sun Apr 30 22:06:58 2006 From: siretart at tauware.de (Reinhard Tartler) Date: Sun, 30 Apr 2006 22:06:58 -0000 Subject: [Bug 37795] Re: zd1211 wireless driver broken, too old (20050315) References: <20060403011323.23733.67873.malonedeb@gandwana.ubuntu.com> Message-ID: <20060430220659.30606.47420.malone@gangotri.ubuntu.com> Sean, try 'sudo ifconfig wlan0 up' before using iwconfig. The interface needs to be up before using iwconfig. Since no other driver has this behavior, and it keeps on confusing users and tools like network-manager, can we please fix that? -- zd1211 wireless driver broken, too old (20050315) https://launchpad.net/bugs/37795 From launchpad.net.tormod at xoxy.net Sun Apr 30 22:44:10 2006 From: launchpad.net.tormod at xoxy.net (Tormod Volden) Date: Sun, 30 Apr 2006 22:44:10 -0000 Subject: [Bug 42160] Re: [Dapper] Shut Down won't power off References: <20060430010556.16712.32800.malonedeb@gandwana.ubuntu.com> Message-ID: <20060430224410.16739.6802.malone@gandwana.ubuntu.com> Thanks for the information. Now we have to wait for the kernel knights to come to the rescue. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Needs Info => Unconfirmed -- [Dapper] Shut Down won't power off https://launchpad.net/bugs/42160 From simos.ubuntu at gmail.com Sun Apr 30 22:59:40 2006 From: simos.ubuntu at gmail.com (Simos Xenitellis) Date: Sun, 30 Apr 2006 22:59:40 -0000 Subject: [Bug 37795] Re: zd1211 wireless driver broken, too old (20050315) References: <20060403011323.23733.67873.malonedeb@gandwana.ubuntu.com> Message-ID: <20060430225940.30638.85582.malone@gangotri.ubuntu.com> Doesn't madwifi (ath0) have the same behaviour? (the interface has to be up so that it can associate/scan) -- zd1211 wireless driver broken, too old (20050315) https://launchpad.net/bugs/37795 From simos.ubuntu at gmail.com Sun Apr 30 23:14:30 2006 From: simos.ubuntu at gmail.com (Simos Xenitellis) Date: Sun, 30 Apr 2006 23:14:30 -0000 Subject: [Bug 37795] Re: zd1211 wireless driver broken, too old (20050315) References: <20060403011323.23733.67873.malonedeb@gandwana.ubuntu.com> Message-ID: <20060430231430.30638.14206.malone@gangotri.ubuntu.com> madwifi: Search for "ifconfig ath0 up" at http://madwifi.org/wiki/UserDocs/FirstTimeHowTo "Then we need to bring up the wireless interface. This is done by typing (as root): ifconfig ath0 up Next, you can do the actual scan, which can be done in two ways. " -- zd1211 wireless driver broken, too old (20050315) https://launchpad.net/bugs/37795 From siretart at tauware.de Sun Apr 30 23:17:25 2006 From: siretart at tauware.de (Reinhard Tartler) Date: Sun, 30 Apr 2006 23:17:25 -0000 Subject: [Bug 37795] Re: zd1211 wireless driver broken, too old (20050315) References: <20060403011323.23733.67873.malonedeb@gandwana.ubuntu.com> Message-ID: <20060430231725.30638.48275.malone@gangotri.ubuntu.com> in madwifi, the interface needs to be up for the radio to be enabled. for zd1211 the interface needs to be up to behave like an wireless interface at all! IOW: If the interface is down, zd1211 doesn't behave like an wireless interface, and iwconfig pretends that wifi0 had no wireless extensions at all! -- zd1211 wireless driver broken, too old (20050315) https://launchpad.net/bugs/37795 From garybyron at verizon.net Sun Apr 30 23:38:43 2006 From: garybyron at verizon.net (gjbnh) Date: Sun, 30 Apr 2006 23:38:43 -0000 Subject: [Bug 41385] Re: Broadcom wireless not working References: <20060425210311.28914.38034.malonedeb@gangotri.ubuntu.com> Message-ID: <20060430233843.16739.63325.malone@gandwana.ubuntu.com> Sorry, I've been on vacation the past weekout of town. Here is the output you desire: gary at gary-laptop:~$ dmesg [4294667.296000] Linux version 2.6.15-21-386 (buildd at rothera) (gcc version 4.0.3 (Ubuntu 4.0.3-1ubuntu5)) #1 PREEMPT Fri Apr 21 16:43:33 UTC 2006 [4294667.296000] BIOS-provided physical RAM map: [4294667.296000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [4294667.296000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [4294667.296000] BIOS-e820: 00000000000ce000 - 00000000000d0000 (reserved) [4294667.296000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) [4294667.296000] BIOS-e820: 0000000000100000 - 000000001dee0000 (usable) [4294667.296000] BIOS-e820: 000000001dee0000 - 000000001deec000 (ACPI data) [4294667.296000] BIOS-e820: 000000001deec000 - 000000001df00000 (ACPI NVS) [4294667.296000] BIOS-e820: 000000001df00000 - 0000000020000000 (reserved) [4294667.296000] BIOS-e820: 00000000ff800000 - 00000000ffc00000 (reserved) [4294667.296000] BIOS-e820: 00000000fffffc00 - 0000000100000000 (reserved) [4294667.296000] 0MB HIGHMEM available. [4294667.296000] 478MB LOWMEM available. [4294667.296000] On node 0 totalpages: 122592 [4294667.296000] DMA zone: 4096 pages, LIFO batch:0 [4294667.296000] DMA32 zone: 0 pages, LIFO batch:0 [4294667.296000] Normal zone: 118496 pages, LIFO batch:31 [4294667.296000] HighMem zone: 0 pages, LIFO batch:0 [4294667.296000] DMI present. [4294667.296000] ACPI: RSDP (v000 HP ) @ 0x000f6560 [4294667.296000] ACPI: RSDT (v001 HP 3084 0x06040000 LTP 0x00000000) @ 0x1dee67e7 [4294667.296000] ACPI: FADT (v001 HP 3084 0x06040000 PTL 0x00000050) @ 0x1deebed2 [4294667.296000] ACPI: BOOT (v001 HP 3084 0x06040000 LTP 0x00000001) @ 0x1deebfd8 [4294667.296000] ACPI: DSDT (v001 HP 3084 0x06040000 MSFT 0x0100000e) @ 0x00000000 [4294667.296000] ACPI: PM-Timer IO Port: 0x1008 [4294667.296000] Allocating PCI resources starting at 30000000 (gap: 20000000:df800000) [4294667.296000] Built 1 zonelists [4294667.296000] Kernel command line: root=/dev/hda6 ro quiet splash [4294667.296000] Local APIC disabled by BIOS (or by default) -- you can enable it with "lapic" [4294667.296000] mapped APIC to ffffd000 (013c0000) [4294667.296000] Initializing CPU#0 [4294667.296000] PID hash table entries: 2048 (order: 11, 32768 bytes) [4294667.296000] Detected 1298.952 MHz processor. [4294667.296000] Using pmtmr for high-res timesource [4294667.296000] Console: colour VGA+ 80x25 [4294669.510000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)[4294669.510000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [4294669.526000] Memory: 475828k/490368k available (1974k kernel code, 13936k reserved, 604k data, 288k init, 0k highmem) [4294669.526000] Checking if this processor honours the WP bit even in supervisor mode... Ok. [4294669.587000] Calibrating delay using timer specific routine.. 2599.14 BogoMIPS (lpj=1299572) [4294669.587000] Security Framework v1.0.0 initialized [4294669.587000] SELinux: Disabled at boot. [4294669.587000] Mount-cache hash table entries: 512 [4294669.587000] CPU: After generic identify, caps: a7e9f9bf 00000000 00000000 00000000 00000000 00000000 00000000 [4294669.587000] CPU: After vendor identify, caps: a7e9f9bf 00000000 00000000 00000000 00000000 00000000 00000000 [4294669.587000] CPU: L1 I cache: 32K, L1 D cache: 32K [4294669.587000] CPU: L2 cache: 512K [4294669.587000] CPU: After all inits, caps: a7e9f9bf 00000000 00000000 00000040 00000000 00000000 00000000 [4294669.587000] mtrr: v2.0 (20020519) [4294669.587000] CPU: Intel(R) Celeron(R) M processor 1300MHz stepping 05 [4294669.587000] Enabling fast FPU save and restore... done. [4294669.587000] Enabling unmasked SIMD FPU exception support... done. [4294669.587000] Checking 'hlt' instruction... OK. [4294669.591000] checking if image is initramfs... it is [4294670.691000] Freeing initrd memory: 6395k freed [4294670.699000] ACPI: Looking for DSDT ... not found! [4294670.701000] ACPI: setting ELCR to 0200 (from 0c20) [4294670.717000] NET: Registered protocol family 16 [4294670.717000] EISA bus registered [4294670.717000] ACPI: bus type pci registered [4294670.718000] PCI: PCI BIOS revision 2.10 entry at 0xfd9a2, last bus=2 [4294670.718000] PCI: Using configuration type 1 [4294670.718000] ACPI: Subsystem revision 20051216 [4294670.721000] ACPI: Interpreter enabled [4294670.721000] ACPI: Using PIC for interrupt routing [4294670.721000] ACPI: PCI Root Bridge [PCI0] (0000:00) [4294670.721000] PCI: Probing PCI hardware (bus 00) [4294670.724000] Boot video device is 0000:00:02.0 [4294670.724000] PCI quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO [4294670.724000] PCI quirk: region 1180-11bf claimed by ICH4 GPIO [4294670.724000] PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 [4294670.724000] PCI: Transparent bridge - 0000:00:1e.0 [4294670.724000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [4294670.729000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] [4294670.730000] ACPI: PCI Interrupt Link [LNKA] (IRQs *10) [4294670.730000] ACPI: PCI Interrupt Link [LNKB] (IRQs *5) [4294670.731000] ACPI: PCI Interrupt Link [LNKC] (IRQs *11) [4294670.731000] ACPI: PCI Interrupt Link [LNKD] (IRQs *11) [4294670.731000] ACPI: PCI Interrupt Link [LNKE] (IRQs 11) *0, disabled. [4294670.731000] ACPI: PCI Interrupt Link [LNKF] (IRQs 11) *0, disabled. [4294670.732000] ACPI: PCI Interrupt Link [LNKG] (IRQs 11) *0, disabled. [4294670.732000] ACPI: PCI Interrupt Link [LNKH] (IRQs *11) [4294670.733000] ACPI: Embedded Controller [H_EC] (gpe 29) interrupt mode. [4294670.738000] Linux Plug and Play Support v0.97 (c) Adam Belay [4294670.738000] pnp: PnP ACPI init [4294670.740000] pnp: PnP ACPI: found 7 devices [4294670.740000] PnPBIOS: Disabled by ACPI PNP [4294670.740000] PCI: Using ACPI for IRQ routing [4294670.740000] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [4294670.745000] PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0 [4294670.745000] PCI: Bus 3, cardbus bridge: 0000:02:05.0 [4294670.745000] IO window: 00003400-000034ff [4294670.745000] IO window: 00003800-000038ff [4294670.745000] PREFETCH window: 30000000-31ffffff [4294670.745000] MEM window: 34000000-35ffffff [4294670.745000] PCI: Bridge: 0000:00:1e.0 [4294670.745000] IO window: 3000-3fff [4294670.745000] MEM window: e0200000-e02fffff [4294670.745000] PREFETCH window: 30000000-31ffffff [4294670.745000] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [4294670.745000] **** SET: Misaligned resource pointer: dd93b5c2 Type 07 Len 0 [4294670.746000] ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 11 [4294670.746000] PCI: setting IRQ 11 as level-triggered [4294670.746000] ACPI: PCI Interrupt 0000:02:05.0[A] -> Link [LNKE] -> GSI 11 (level, low) -> IRQ 11 [4294670.746000] Simple Boot Flag at 0x36 set to 0x1 [4294670.746000] audit: initializing netlink socket (disabled) [4294670.746000] audit(1146440027.745:1): initialized [4294670.746000] VFS: Disk quotas dquot_6.5.1 [4294670.746000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [4294670.746000] Initializing Cryptographic API [4294670.746000] io scheduler noop registered [4294670.746000] io scheduler anticipatory registered [4294670.746000] io scheduler deadline registered [4294670.746000] io scheduler cfq registered [4294670.747000] isapnp: Scanning for PnP cards... [4294671.104000] isapnp: No Plug & Play device found [4294671.122000] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PSM1] at 0x60,0x64 irq 1,12 [4294671.129000] serio: i8042 AUX port at 0x60,0x64 irq 12 [4294671.129000] serio: i8042 KBD port at 0x60,0x64 irq 1 [4294671.129000] Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled [4294671.133000] **** SET: Misaligned resource pointer: ddc0a1c2 Type 07 Len 0 [4294671.133000] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5 [4294671.133000] PCI: setting IRQ 5 as level-triggered [4294671.133000] ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5 [4294671.133000] ACPI: PCI interrupt for device 0000:00:1f.6 disabled [4294671.133000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [4294671.134000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [4294671.134000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [4294671.134000] mice: PS/2 mouse device common for all mice [4294671.135000] EISA: Probing bus 0 at eisa.0 [4294671.135000] Cannot allocate resource for EISA slot 1 [4294671.135000] Cannot allocate resource for EISA slot 2 [4294671.135000] Cannot allocate resource for EISA slot 3 [4294671.135000] EISA: Detected 0 cards. [4294671.135000] NET: Registered protocol family 2 [4294671.145000] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)[4294671.145000] TCP established hash table entries: 16384 (order: 4, 65536 bytes) [4294671.145000] TCP bind hash table entries: 16384 (order: 4, 65536 bytes) [4294671.145000] TCP: Hash tables configured (established 16384 bind 16384) [4294671.145000] TCP reno registered [4294671.145000] TCP bic registered [4294671.145000] NET: Registered protocol family 1 [4294671.145000] NET: Registered protocol family 8 [4294671.145000] NET: Registered protocol family 20 [4294671.145000] Using IPI Shortcut mode [4294671.145000] ACPI wakeup devices: [4294671.145000] BAT0 LAN PS2K PSM1 USB0 USB1 USB7 [4294671.145000] ACPI: (supports S0 S3 S4 S5) [4294671.145000] Freeing unused kernel memory: 288k freed [4294671.171000] input: AT Translated Set 2 keyboard as /class/input/input0 [4294671.233000] vga16fb: initializing [4294671.233000] vga16fb: mapped to 0xc00a0000 [4294671.358000] Console: switching to colour frame buffer device 80x25 [4294671.358000] fb0: VGA16 VGA frame buffer device [4294672.483000] Capability LSM initialized [4294672.520000] ACPI: CPU0 (power states: C1[C1] C2[C2]) [4294672.522000] ACPI: Thermal Zone [THRM] (47 C) [4294673.033000] ICH4: IDE controller at PCI slot 0000:00:1f.1 [4294673.033000] PCI: Enabling device 0000:00:1f.1 (0005 -> 0007) [4294673.033000] **** SET: Misaligned resource pointer: ddc161c2 Type 07 Len 0 [4294673.033000] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11 [4294673.033000] ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11 [4294673.033000] ICH4: chipset revision 3 [4294673.033000] ICH4: not 100% native mode: will probe irqs later [4294673.033000] ide0: BM-DMA at 0x1810-0x1817, BIOS settings: hda:DMA, hdb:pio [4294673.033000] ide1: BM-DMA at 0x1818-0x181f, BIOS settings: hdc:DMA, hdd:pio [4294673.033000] Probing IDE interface ide0... [4294673.297000] hda: TOSHIBA MK6025GAS, ATA DISK drive [4294673.909000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [4294673.959000] Probing IDE interface ide1... [4294674.631000] hdc: SD-R2512, ATAPI CD/DVD-ROM drive [4294675.264000] ide1 at 0x170-0x177,0x376 on irq 15 [4294675.280000] hda: max request size: 128KiB [4294675.290000] hda: 117210240 sectors (60011 MB), CHS=65535/16/63, UDMA(100) [4294675.290000] hda: cache flushes supported [4294675.290000] hda: hda1 hda2 < hda5 hda6 > [4294675.391000] hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, DMA [4294675.391000] Uniform CD-ROM driver Revision: 3.20 [4294675.691000] usbcore: registered new driver usbfs [4294675.691000] usbcore: registered new driver hub [4294675.693000] USB Universal Host Controller Interface driver v2.3 [4294675.694000] **** SET: Misaligned resource pointer: ddc62502 Type 07 Len 0 [4294675.694000] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10 [4294675.694000] PCI: setting IRQ 10 as level-triggered [4294675.694000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10 [4294675.694000] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [4294675.694000] uhci_hcd 0000:00:1d.0: UHCI Host Controller [4294675.695000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [4294675.695000] uhci_hcd 0000:00:1d.0: irq 10, io base 0x00001820 [4294675.695000] hub 1-0:1.0: USB hub found [4294675.695000] hub 1-0:1.0: 2 ports detected [4294675.796000] **** SET: Misaligned resource pointer: ddc62202 Type 07 Len 0 [4294675.796000] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 [4294675.796000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11 [4294675.796000] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [4294675.796000] uhci_hcd 0000:00:1d.1: UHCI Host Controller [4294675.796000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 [4294675.796000] uhci_hcd 0000:00:1d.1: irq 11, io base 0x00001840 [4294675.796000] hub 2-0:1.0: USB hub found [4294675.797000] hub 2-0:1.0: 2 ports detected [4294675.898000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11 [4294675.898000] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [4294675.898000] uhci_hcd 0000:00:1d.2: UHCI Host Controller [4294675.898000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 [4294675.898000] uhci_hcd 0000:00:1d.2: irq 11, io base 0x00001860 [4294675.898000] hub 3-0:1.0: USB hub found [4294675.898000] hub 3-0:1.0: 2 ports detected [4294676.001000] **** SET: Misaligned resource pointer: ddaaeac2 Type 07 Len 0 [4294676.001000] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11 [4294676.001000] ACPI: PCI Interrupt 0000:00:1d.7[D] -> Link [LNKH] -> GSI 11 (level, low) -> IRQ 11 [4294676.001000] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [4294676.001000] ehci_hcd 0000:00:1d.7: EHCI Host Controller [4294676.001000] ehci_hcd 0000:00:1d.7: debug port 1 [4294676.001000] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [4294676.001000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4 [4294676.001000] ehci_hcd 0000:00:1d.7: irq 11, io mem 0xe0100000 [4294676.002000] usb 1-1: new full speed USB device using uhci_hcd and address 2[4294676.005000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [4294676.005000] hub 4-0:1.0: USB hub found [4294676.005000] hub 4-0:1.0: 6 ports detected [4294676.283000] EXT3-fs: mounted filesystem with ordered data mode. [4294676.298000] kjournald starting. Commit interval 5 seconds [4294676.522000] usb 4-2: new high speed USB device using ehci_hcd and address 3[4294676.636000] hub 4-2:1.0: USB hub found [4294676.636000] hub 4-2:1.0: 4 ports detected [4294676.944000] usb 1-1: new full speed USB device using uhci_hcd and address 3[4294677.245000] usb 4-2.3: new low speed USB device using ehci_hcd and address 4 [4294688.220000] Linux agpgart interface v0.101 (c) Dave Jones [4294688.222000] agpgart: Detected an Intel 855 Chipset. [4294688.222000] agpgart: Detected 32636K stolen memory. [4294688.230000] agpgart: AGP aperture is 128M @ 0xe8000000 [4294688.415000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [4294688.421000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [4294688.458000] hw_random hardware driver 1.0.0 loaded [4294688.577000] Real Time Clock Driver v1.12 [4294689.315000] ieee80211_crypt: registered algorithm 'NULL' [4294689.318000] ieee80211: 802.11 data/management/control stack, git-1.1.7 [4294689.318000] ieee80211: Copyright (C) 2004-2005 Intel Corporation [4294689.541000] usbcore: registered new driver usbserial [4294689.542000] drivers/usb/serial/usb-serial.c: USB Serial support registered for generic [4294689.543000] usbcore: registered new driver usbserial_generic [4294689.543000] drivers/usb/serial/usb-serial.c: USB Serial Driver core [4294689.565000] ACPI: PCI Interrupt 0000:02:05.0[A] -> Link [LNKE] -> GSI 11 (level, low) -> IRQ 11 [4294689.565000] Yenta: CardBus bridge found at 0000:02:05.0 [103c:3084] [4294689.565000] Yenta: Using CSCINT to route CSC interrupts to PCI [4294689.565000] Yenta: Routing CardBus interrupts to PCI [4294689.565000] Yenta TI: socket 0000:02:05.0, mfunc 0x01111112, devctl 0x64 [4294689.693000] drivers/usb/serial/usb-serial.c: USB Serial support registered for PocketPC PDA [4294689.693000] drivers/usb/serial/ipaq.c: USB PocketPC PDA driver v0.5 [4294689.694000] ipaq 1-1:1.0: PocketPC PDA converter detected [4294689.696000] usb 1-1: PocketPC PDA converter now attached to ttyUSB0 [4294689.696000] usbcore: registered new driver ipaq [4294689.712000] bcm43xx: driver [4294689.738000] 8139too Fast Ethernet driver 0.9.27 [4294689.738000] ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10 [4294689.738000] eth0: RealTek RTL8139 at 0xde97c000, 00:c0:9f:50:21:0c, IRQ 10 [4294689.738000] eth0: Identified 8139 chip type 'RTL-8100B/8139D' [4294689.758000] Synaptics Touchpad, model: 1, fw: 5.9, id: 0x236eb3, caps: 0x904713/0x10008 [4294689.759000] usbcore: registered new driver hiddev [4294689.761000] input: USBPS2 as /class/input/input1 [4294689.761000] input: USB HID v1.00 Keyboard [USBPS2] on usb-0000:00:1d.7-2.3 [4294689.765000] input: USBPS2 as /class/input/input2 [4294689.766000] input: USB HID v1.00 Mouse [USBPS2] on usb-0000:00:1d.7-2.3 [4294689.766000] usbcore: registered new driver usbhid [4294689.766000] drivers/usb/input/hid-core.c: v2.6:USB HID core driver [4294689.792000] Yenta: ISA IRQ mask 0x00d8, PCI irq 11 [4294689.792000] Socket status: 30000006 [4294689.792000] pcmcia: parent PCI bridge I/O window: 0x3000 - 0x3fff [4294689.792000] cs: IO port probe 0x3000-0x3fff: clean. [4294689.792000] pcmcia: parent PCI bridge Memory window: 0xe0200000 - 0xe02fffff [4294689.792000] pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x31ffffff [4294689.793000] input: SynPS/2 Synaptics TouchPad as /class/input/input3 [4294689.850000] ACPI: PCI Interrupt 0000:02:06.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11 [4294690.294000] ts: Compaq touchscreen protocol output [4294690.306000] 8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004) [4294690.489000] ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5 [4294690.489000] PCI: Setting latency timer of device 0000:00:1f.5 to 64 [4294690.664000] cs: IO port probe 0x100-0x3af: clean. [4294690.666000] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7 [4294690.666000] cs: IO port probe 0x820-0x8ff: clean. [4294690.667000] cs: IO port probe 0xc00-0xcf7: clean. [4294690.668000] cs: IO port probe 0xa00-0xaff: clean. [4294690.796000] intel8x0_measure_ac97_clock: measured 50251 usecs [4294690.796000] intel8x0: clocking to 48000 [4294692.138000] Adding 265028k swap on /dev/hda5. Priority:-1 extents:1 across:265028k [4294692.233000] eth0: link up, 100Mbps, full-duplex, lpa 0x41E1 [4294693.357000] NET: Registered protocol family 17 [4294693.357000] EXT3 FS on hda6, internal journal [4294693.917000] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 [4294693.917000] md: bitmap version 4.39 [4294694.353000] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel at redhat.com [4294695.067000] cdrom: open failed. [4294695.443000] NET: Registered protocol family 10 [4294695.444000] lo: Disabled Privacy Extensions [4294695.444000] IPv6 over IPv4 tunneling driver [4294695.567000] NTFS driver 2.1.25 [Flags: R/O MODULE]. [4294695.622000] NTFS volume version 3.1. [4294696.901000] ACPI: AC Adapter [ACAD] (on-line) [4294696.930000] ACPI: Battery Slot [BAT0] (battery present) [4294697.018000] ACPI: Power Button (FF) [PWRF] [4294697.018000] ACPI: Lid Switch [LID0] [4294697.018000] ACPI: Power Button (CM) [PWRB] [4294697.132000] ibm_acpi: ec object not found [4294697.157000] pcc_acpi: loading... [4294697.262000] ACPI: Video Device [GFX0] (multi-head: yes rom: yes post: no)[4294702.639000] [drm] Initialized drm 1.0.0 20040925 [4294702.643000] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10 [4294702.643000] [drm] Initialized i915 1.1.0 20040405 on minor 0: [4294702.644000] [drm] Initialized i915 1.1.0 20040405 on minor 1: [4294702.644000] mtrr: base(0xe8020000) is not aligned on a size(0x300000) boundary [4294705.077000] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) [4294705.077000] apm: overridden by ACPI. [4294705.625000] eth0: no IPv6 routers present [4294708.267000] hdc: drive_cmd: status=0x51 { DriveReady SeekComplete Error } [4294708.267000] hdc: drive_cmd: error=0x04 { AbortedCommand } [4294708.267000] ide: failed opcode was: 0xec [4294708.383000] hdc: drive_cmd: status=0x51 { DriveReady SeekComplete Error } [4294708.383000] hdc: drive_cmd: error=0x04 { AbortedCommand } [4294708.383000] ide: failed opcode was: 0xec [4294708.750000] Bluetooth: Core ver 2.8 [4294708.750000] NET: Registered protocol family 31 [4294708.750000] Bluetooth: HCI device and connection manager initialized [4294708.750000] Bluetooth: HCI socket layer initialized [4294708.859000] Bluetooth: L2CAP ver 2.8 [4294708.859000] Bluetooth: L2CAP socket layer initialized [4294708.864000] Bluetooth: RFCOMM socket layer initialized [4294708.864000] Bluetooth: RFCOMM TTY layer initialized [4294708.864000] Bluetooth: RFCOMM ver 1.7 gary at gary-laptop:~$ -- Broadcom wireless not working https://launchpad.net/bugs/41385 From garybyron at verizon.net Sun Apr 30 23:42:23 2006 From: garybyron at verizon.net (gjbnh) Date: Sun, 30 Apr 2006 23:42:23 -0000 Subject: [Bug 41385] Re: Broadcom wireless not working References: <20060425210311.28914.38034.malonedeb@gangotri.ubuntu.com> Message-ID: <20060430234223.16712.74216.malone@gandwana.ubuntu.com> here is the output of uname" 2.6.15-21-386 #1 PREEMPT Fri Apr 21 16:43:33 UTC 2006 i686 GNU/Linux -- Broadcom wireless not working https://launchpad.net/bugs/41385 From simos.ubuntu at gmail.com Sun Apr 30 23:54:50 2006 From: simos.ubuntu at gmail.com (Simos Xenitellis) Date: Sun, 30 Apr 2006 23:54:50 -0000 Subject: [Bug 37795] Re: zd1211 wireless driver broken, too old (20050315) References: <20060403011323.23733.67873.malonedeb@gandwana.ubuntu.com> Message-ID: <20060430235450.30638.86080.malone@gangotri.ubuntu.com> Thanks for the clarification. In that case, I think the zd1211 project (http://zd1211.ath.cx/) needs to be notified. I am not sure whether the NetworkManager (or other GNOME network tools) will put an exception for the zd1211 case. It does not hurt to report it though. -- zd1211 wireless driver broken, too old (20050315) https://launchpad.net/bugs/37795