[Bug 48263] Re: [regression] Wired ethernet (VIA VT6102 Rhine II) and Wireless (RaLink 2500) no longer work under 6.06 (needs acpi=noirq blacklisting)

[Rikk03]

I have a similar problem with my desktop computer, I have a VIA VT6102
Ethernet card installed.

It worked fine with my first ever install of linux - Ubuntu Dapper.
Worked fine - as in connecting to the net through my Linksys WAG54G
ver.2 router.

However, when I tried to install a USB2 WUSB54G wireless -G Adaptor and
tried to configure it / activate it = freeze.  Also had difficulty
switching from eth0.

 *-usb
       description: Generic USB device
       product: Wireless-G USB Network Adapter
       vendor: Cisco-Linksys
       physical id: 5
       bus info: usb at 5:5
       version: 0.04
       capabilities: usb-2.00
       configuration: driver=rtusb maxpower=300mA speed=480.0MB/s

 *-network
       description: Ethernet interface
       product: VT6102 [Rhine-II]
       vendor: VIA Technologies, Inc.
       physical id: 12
       bus info: pci at 00:12.0
       logical name: eth0
       version: 78
       serial: ***********
       size: 100MB/s
       capacity: 100MB/s
       width: 32 bits
       clock: 33MHz
       capabilities: bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegociation

If you want me to provide further information you will have to tell me
exactly what to type - also I would like to know how to add the
acpi=noirq option - is this my best choice?

-- 
[regression] Wired ethernet (VIA VT6102 Rhine II) and Wireless (RaLink 2500) no longer work under 6.06 (needs acpi=noirq blacklisting)
https://launchpad.net/bugs/48263