[Bug 75767] Re: kernel panic: killing interrupt handler

[Daniel Topa]

** Description changed:

  Binary package hint: linux-image-2.6.15-27-amd64-server
  
  Kernel panic on HP BL460c blade server.
  
  The server hangs after high "network" load with bnx2 module (see
  attachment). No special boot kernel parameters are used.
  
  # cat /proc/cmdline
  root=/dev/mapper/vg00-lv_root ro vga=771
+ 
+ Only eth1 is used.
+ 
+ # hwinfo --network
+ ...
+ 49: None 01.0: 10701 Ethernet
+   [Created at net.114]
+   Unique ID: L2Ua.ndpeucax6V1
+   Parent ID: JNkJ.OKRlPBdQgr3
+   SysFS ID: /class/net/eth1
+   SysFS Device Link: /devices/pci0000:00/0000:00:1c.0/0000:02:00.0/0000:03:00.0
+   Hardware Class: network interface
+   Model: "Ethernet network interface"
+   Driver: "bnx2"
+   Device File: eth1
+   HW Address: 00:18:fe:34:19:5c
+   Link detected: yes
+   Config Status: cfg=new, avail=yes, need=no, active=unknown
+   Attached to: #29 (Ethernet controller)
+ ...

-- 
kernel panic: killing interrupt handler
https://launchpad.net/bugs/75767