From gbauman at gmail.com Sat Jul 1 00:08:07 2006 From: gbauman at gmail.com (Gabriel Bauman) Date: Sat, 01 Jul 2006 00:08:07 -0000 Subject: [Bug 48267] Re: No driver loaded for Realtek 8129 NIC, visible in lspci References: <20060603200701.4978.85960.malonedeb@gandwana.ubuntu.com> Message-ID: <20060701000807.17086.28322.malone@gangotri.ubuntu.com> Well, with pci=noacpi there isn't any change to the lspci output. I did notice this in dmesg, though: [17179616.604000] PCI: Found IRQ 11 for device 0000:00:0b.0 [17179616.604000] eth0: RealTek RTL8139 at 0xd28c8000, 00:e0:29:99:85:3c, IRQ 11 [17179616.604000] eth0: Identified 8139 chip type 'RTL-8139C' [17179616.604000] PCI: Enabling device 0000:00:0d.0 (0000 -> 0001) [17179616.604000] PCI: Found IRQ 9 for device 0000:00:0d.0 [17179616.604000] PCI: Sharing IRQ 9 with 0000:00:07.2 [17179616.604000] PCI: Sharing IRQ 9 with 0000:00:09.0 [17179616.604000] 8139too: 0000:00:0d.0: region #1 not an MMIO resource, aborting Notice the last line above - it refers to the card that isn't working (0000:00:0d.0) and gives the reason. The 8139too kernel driver can't work with the 8129 card. As I said four posts up, the '8139too' kernel driver DOES NOT SUPPORT the 8129 chipset. That's the source of the problem - the wrong kernel module is loaded for the card. The standard 'rtl8139' driver supports both the 8129 and 8139 chipsets. Please read http://web.archive.org/web/20040614015416/http://www.scyld.com/rtl8139.html for further info. -- No driver loaded for Realtek 8129 NIC, visible in lspci https://launchpad.net/bugs/48267 From jflorian at doubledog.org Sat Jul 1 01:56:49 2006 From: jflorian at doubledog.org (John Florian) Date: Sat, 01 Jul 2006 01:56:49 -0000 Subject: [Bug 38278] Re: wifi card don't work. isl3886 is required but not installed References: <20060405203926.24486.7083.malonedeb@gangotri.ubuntu.com> Message-ID: <20060701015649.17086.53261.malone@gangotri.ubuntu.com> I too have a 3Com® OfficeConnect® Wireless 11g PC Card (3CRWE154G72) version 1.0 PCMCIA card and have not been able to get this working since upgrading to Dapper. It worked great under Breezy. -- wifi card don't work. isl3886 is required but not installed https://launchpad.net/bugs/38278 From apeeters at lashout.net Sat Jul 1 07:39:59 2006 From: apeeters at lashout.net (Adriaan Peeters) Date: Sat, 01 Jul 2006 07:39:59 -0000 Subject: [Bug 50031] Re: [regression] Suspend [to-RAM and to-disk] is broken in 2.6.15-25.43 References: <20060616182146.13137.51951.malonedeb@gandwana.ubuntu.com> Message-ID: <20060701073959.17054.47068.malone@gangotri.ubuntu.com> Another confirmation on a Dell Latitude D505. The last action on this bug is more than a week ago, what is the status? -- [regression] Suspend [to-RAM and to-disk] is broken in 2.6.15-25.43 https://launchpad.net/bugs/50031 From lagermanio at yahoo.de Sat Jul 1 12:29:02 2006 From: lagermanio at yahoo.de (Vital) Date: Sat, 01 Jul 2006 12:29:02 -0000 Subject: [Bug 51298] LCS-8531G WiFi-card is not recognized by Ubuntu 5.10 References: <20060629131721.17054.69841.malonedeb@gangotri.ubuntu.com> Message-ID: <20060701122902.17054.94519.launchpad@canonical@gangotri.ubuntu.com> Public bug reported: The LCS-8531G WiFi-Card (made by Longshine) is not recognized by Ubuntu 5.10. According to the information at my disposal, this card is made using Prism-GT chipset with an ISL3890 as MAC-controlled. This information confirmed me by a support team of Longshine as well. Therefore the card shall be recognized by a Prism54 driver, but it isn't. I am using the standart CD-delivery of Ubuntu 5.10 with updates from the end of May 06, wich is running on Compaq Evo N160. ** Affects: linux-source-2.6.12 (Ubuntu) Importance: Untriaged Status: Unconfirmed -- LCS-8531G WiFi-card is not recognized by Ubuntu 5.10 https://launchpad.net/bugs/51298 From lagermanio at yahoo.de Sat Jul 1 12:29:02 2006 From: lagermanio at yahoo.de (Vital) Date: Sat, 01 Jul 2006 12:29:02 -0000 Subject: [Bug 51298] Re: LCS-8531G WiFi-card is not recognized by Ubuntu 5.10 References: <20060629131721.17054.69841.malonedeb@gangotri.ubuntu.com> Message-ID: <20060701122902.17054.31477.launchpad@gangotri.ubuntu.com> ** Changed in: Ubuntu Sourcepackagename: None => linux-source-2.6.12 -- LCS-8531G WiFi-card is not recognized by Ubuntu 5.10 https://launchpad.net/bugs/51298 From lagermanio at yahoo.de Sat Jul 1 12:43:44 2006 From: lagermanio at yahoo.de (Vital) Date: Sat, 01 Jul 2006 12:43:44 -0000 Subject: [Bug 51298] Re: LCS-8531G WiFi-card is not recognized by Ubuntu 5.10 References: <20060629131721.17054.69841.malonedeb@gangotri.ubuntu.com> Message-ID: <20060701124344.17054.90565.malone@gangotri.ubuntu.com> More information I collected today. Kernel version is 2.6.12-9-386. The system reported the card properties as following: lspci -v 0000:03:00.0 Network controller: Texas Instruments ACX 111 54Mbps Wireless Interface Subsystem: Abocom Systems Inc: Unknown device ab80 Flags: medium devsel, IRQ 10 Memory at 10820000 (32-bit, non-prefetchable) [size=8K] Memory at 10800000 (32-bit, non-prefetchable) [size=128K] Capabilities: But it isn't a TI chipset. A prism54 driver is installed, but an acx driver is using instead. Why? -- LCS-8531G WiFi-card is not recognized by Ubuntu 5.10 https://launchpad.net/bugs/51298 From richtl at arscognita.com Sat Jul 1 15:54:53 2006 From: richtl at arscognita.com (Richard Tango-Lowy) Date: Sat, 01 Jul 2006 15:54:53 -0000 Subject: [Bug 50588] Re: Slow boot time since update to kernel 2.6.15-25-686 References: <20060621173616.23311.67847.malonedeb@gangotri.ubuntu.com> Message-ID: <20060701155453.17054.19614.malone@gangotri.ubuntu.com> I can reproduce this on my Thinkpad T60p. It started when I upgraded to the .25 kernel. The boot delay is now about 4 minutes. -- Slow boot time since update to kernel 2.6.15-25-686 https://launchpad.net/bugs/50588 From roshan.shariff at gmail.com Sat Jul 1 18:22:47 2006 From: roshan.shariff at gmail.com (Roshan Shariff) Date: Sat, 01 Jul 2006 18:22:47 -0000 Subject: [Bug 42909] Re: kernel panic at boot References: <20060504095810.7739.24400.malonedeb@gangotri.ubuntu.com> Message-ID: <20060701182247.17054.95131.malone@gangotri.ubuntu.com> I also have a Toshiba Satellite M20 with the same problem. The Live CD works fine, but an installed system panics while "Mounting Root Filesystem" with IIRC the same error as Carmelo reports. Rarely, it doesn't panic at that step, but invariably panics while logging in. If I manage to get to recovery mode, it usually panics in short order. This behavior seems like Bug #45636. This laptop has a SATA hard drive, which is probably the source of errors, since the live CD works fine. Strangely enough, mounting filesystems on the hard drive from the Live CD works, though I have not thoroughly tested this. This problem seems to manifest itself only when the root partition is being mounted from initramfs. The problem went away when I installed the 2.6.15-20 i386 kernel from the Dapper Beta CD. The problem is present in the final Dapper -23 kernel and the updated -25 kernel. However, the laptop sleep mode doesn't work in the older kernel, while it does work on the newer kernels (tested from the Live CD). -- kernel panic at boot https://launchpad.net/bugs/42909 From unaiur at gmail.com Sat Jul 1 18:35:39 2006 From: unaiur at gmail.com (Unai Uribarri) Date: Sat, 01 Jul 2006 18:35:39 -0000 Subject: [Bug 51519] MiniMac doesn't boot without monitor References: <20060701183539.17054.35711.malonedeb@gangotri.ubuntu.com> Message-ID: <20060701183539.17054.35711.malonedeb@gangotri.ubuntu.com> Public bug reported: Binary package hint: linux-image-2.6-power4 If I turn off the monitor, linux doesn't boot until I turn it on again. The machine is very hot, with the fan at top speed, so it should be in a busy wait. I've waited up to 5 minutes without any result. When I turn on the monitor, the screen flash twice and begins the boot process. In the dmesg output, you can see a silence period since second 0 to 42 (when I turn on the monitor): [ 0.000000] Total memory = 1024MB; using 2048kB for hash table (at cfe00000) [ 0.000000] Linux version 2.6.15-25-powerpc (buildd at royal) (gcc version 4.0.3 (Ubuntu 4.0.3-1ubuntu5)) #1 Wed Jun 14 11:27:00 UTC 2006 [ 0.000000] Found initrd at 0xc1900000:0xc20b7000 [ 0.000000] Found UniNorth memory controller & host bridge @ 0xf8000000 revision: 0xd2 [ 0.000000] Mapped at 0xfdfc0000 [ 0.000000] Found a Intrepid mac-io controller, rev: 0, mapped at 0xfdf40000 [ 0.000000] Processor NAP mode on idle enabled. [ 0.000000] PowerMac motherboard: Mac mini [ 0.000000] Enabling clock spreading on Intrepid ASIC [ 0.000000] Found UniNorth PCI host bridge at 0xf0000000. Firmware bus number: 0->0 [ 0.000000] Found UniNorth PCI host bridge at 0xf2000000. Firmware bus number: 0->0 [ 0.000000] Found UniNorth PCI host bridge at 0xf4000000. Firmware bus number: 0->0 [ 0.000000] via-pmu: Server Mode is disabled [ 0.000000] PMU driver 2 initialized for Core99, firmware: 55 [ 0.000000] nvram: Checking bank 0... [ 0.000000] nvram: gen0=298, gen1=299 [ 0.000000] nvram: Active bank is: 1 [ 0.000000] nvram: OF partition at 0x410 [ 0.000000] nvram: XP partition at 0x1020 [ 0.000000] nvram: NR partition at 0x1120 [ 0.000000] Top of RAM: 0x40000000, Total RAM: 0x40000000 [ 0.000000] Memory hole size: 0MB [ 0.000000] On node 0 totalpages: 262144 [ 0.000000] DMA zone: 196608 pages, LIFO batch:31 [ 0.000000] DMA32 zone: 0 pages, LIFO batch:0 [ 0.000000] Normal zone: 0 pages, LIFO batch:0 [ 0.000000] HighMem zone: 65536 pages, LIFO batch:15 [ 0.000000] Built 1 zonelists [ 0.000000] Kernel command line: root=/dev/hda4 ro quiet [ 0.000000] mpic: Setting up MPIC " MPIC 1 " version 1.2 at 80040000, max 4 CPUs [ 0.000000] mpic: ISU size: 64, shift: 6, mask: 3f [ 0.000000] mpic: Initializing for 64 sources [ 0.000000] PID hash table entries: 4096 (order: 12, 65536 bytes) [ 0.000000] GMT Delta read from XPRAM: 0 minutes, DST: off [ 0.000000] time_init: decrementer frequency = 41.620997 MHz [ 0.000000] time_init: processor frequency = 1416.666661 MHz [ 42.073501] Console: colour dummy device 80x25 [ 42.074131] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 42.074960] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 42.123444] High memory: 262144k [ 42.123451] Memory: 1024976k/1048576k available (2692k kernel code, 284984k reserved, 276k data, 304k bss, 180k init) [ 42.123581] Calibrating delay loop... 83.20 BogoMIPS (lpj=166400) [ 42.206992] Security Framework v1.0.0 initialized [ 42.207012] SELinux: Disabled at boot. [ 42.207035] Mount-cache hash table entries: 512 [ 42.207251] device-tree: property "l2-cache" name conflicts with node in /cpus/PowerPC,G4 at 0 [ 42.208402] checking if image is initramfs... it is [ 42.966640] Freeing initrd memory: 7900k freed [ 42.967660] NET: Registered protocol family 16 [ 42.967848] PCI: Probing PCI hardware [ 42.969123] PCI: Cannot allocate resource region 0 of device 0001:10:18.0 [ 42.969136] PCI: Cannot allocate resource region 0 of device 0001:10:19.0 [ 42.969151] Apple USB OHCI 0001:10:18.0 disabled by firmware [ 42.969156] Apple USB OHCI 0001:10:19.0 disabled by firmware [ 42.970245] Thermal assist unit not available [ 42.970822] audit: initializing netlink socket (disabled) [ 42.970836] audit(1151775625.892:1): initialized [ 42.970909] highmem bounce pool size: 64 pages [ 42.971023] VFS: Disk quotas dquot_6.5.1 [ 42.971051] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 42.971130] Initializing Cryptographic API [ 42.971137] io scheduler noop registered [ 42.971145] io scheduler anticipatory registered [ 42.971152] io scheduler deadline registered [ 42.971170] io scheduler cfq registered [ 42.971448] PCI: Enabling device 0000:00:10.0 (0006 -> 0007) [ 43.168816] radeonfb (0000:00:10.0): Invalid ROM signature 0 should be 0xaa55[ 43.168824] radeonfb: Retreived PLL infos from Open Firmware [ 43.168829] radeonfb: Reference=27.00 MHz (RefDiv=12) Memory=190.00 Mhz, System=250.00 MHz [ 43.168833] radeonfb: PLL min 12000 max 35000 [ 44.367929] radeonfb: Monitor 1 type CRT found [ 44.367934] radeonfb: EDID probed [ 44.367936] radeonfb: Monitor 2 type no found [ 44.430535] Console: switching to colour frame buffer device 160x64 [ 44.430546] radeonfb (0000:00:10.0): ATI Radeon Yb [ 44.448146] Macintosh non-volatile memory driver v1.1 [ 44.448231] IN from bad port 64 at c018d1b8 [ 44.448285] IN from bad port 60 at c018d1ec [ 44.448289] IN from bad port 64 at c018d1b8 [ 44.448342] IN from bad port 60 at c018d1ec [ 44.448346] IN from bad port 64 at c018d1b8 [ 44.448399] IN from bad port 60 at c018d1ec [ 44.448403] IN from bad port 64 at c018d1b8 [ 44.448456] IN from bad port 60 at c018d1ec [ 44.448460] IN from bad port 64 at c018d1b8 [ 44.448513] IN from bad port 60 at c018d1ec [ 44.448516] IN from bad port 64 at c018d1b8 [ 44.448570] IN from bad port 60 at c018d1ec [ 44.448573] IN from bad port 64 at c018d1b8 [ 44.448626] IN from bad port 60 at c018d1ec [ 44.448630] IN from bad port 64 at c018d1b8 [ 44.448683] IN from bad port 60 at c018d1ec [ 44.448687] IN from bad port 64 at c018d1b8 [ 44.448740] IN from bad port 60 at c018d1ec [ 44.448744] IN from bad port 64 at c018d1b8 [ 44.448797] IN from bad port 60 at c018d1ec [ 44.448800] IN from bad port 64 at c018d1b8 [ 44.448853] IN from bad port 60 at c018d1ec [ 44.448857] IN from bad port 64 at c018d1b8 [ 44.448910] IN from bad port 60 at c018d1ec [ 44.448914] IN from bad port 64 at c018d1b8 [ 44.448967] IN from bad port 60 at c018d1ec [ 44.448971] IN from bad port 64 at c018d1b8 [ 44.449023] IN from bad port 60 at c018d1ec [ 44.449027] IN from bad port 64 at c018d1b8 [ 44.449080] IN from bad port 60 at c018d1ec [ 44.449084] IN from bad port 64 at c018d1b8 [ 44.449137] IN from bad port 60 at c018d1ec [ 44.449141] IN from bad port 64 at c018d1b8 [ 44.449144] i8042.c: No controller found. [ 44.449625] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 44.449756] MacIO PCI driver attached to Intrepid chipset [ 44.450393] input: Macintosh mouse button emulation as /class/input/input0 [ 44.450550] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 44.450557] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 44.450574] adb: starting probe task... [ 44.450580] adb: finished probe task... [ 44.450671] PCI: Enabling device 0002:20:0d.0 (0000 -> 0002) [ 45.466941] ide0: Found Apple UniNorth ATA-6 controller, bus ID 3, irq 39 [ 45.466958] Probing IDE interface ide0... [ 45.755120] hda: TOSHIBA MK8025GAS, ATA DISK drive [ 46.203116] hdb: MATSHITACD-RW CW-8123, ATAPI CD/DVD-ROM drive [ 46.258947] hda: Enabling Ultra DMA 5 [ 46.259959] hdb: Enabling Ultra DMA 2 [ 46.261004] ide0 at 0xf101a000-0xf101a007,0xf101a160 on irq 39 [ 47.278939] ide1: Found Apple KeyLargo ATA-3 controller, bus ID 0, irq 24 [ 47.278951] Probing IDE interface ide1... [ 47.847062] mice: PS/2 mouse device common for all mice [ 47.847155] NET: Registered protocol family 2 [ 47.883011] IP route cache hash table entries: 65536 (order: 6, 262144 bytes)[ 47.883521] TCP established hash table entries: 262144 (order: 8, 1048576 bytes) [ 47.884880] TCP bind hash table entries: 65536 (order: 6, 262144 bytes) [ 47.885185] TCP: Hash tables configured (established 262144 bind 65536) [ 47.885191] TCP reno registered [ 47.885321] TCP bic registered [ 47.885334] NET: Registered protocol family 1 [ 47.885345] NET: Registered protocol family 8 [ 47.885348] NET: Registered protocol family 20 [ 47.885420] Freeing unused kernel memory: 180k init [ 47.964620] Capability LSM initialized [ 48.012275] Found KeyWest i2c on "uni-n", 2 channels, stepping: 4 bits [ 48.012398] Found KeyWest i2c on "mac-io", 1 channel, stepping: 4 bits [ 48.586242] hda: max request size: 1024KiB [ 48.635785] hda: 156301488 sectors (80026 MB), CHS=16383/255/63, UDMA(100) [ 48.635877] hda: cache flushes supported [ 48.636094] hda: [mac] hda1 hda2 hda3 hda4 hda5 [ 48.657017] hdb: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33) [ 48.657033] Uniform CD-ROM driver Revision: 3.20 [ 49.212448] usbcore: registered new driver usbfs [ 49.212933] usbcore: registered new driver hub [ 49.215264] ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) [ 49.215773] Apple USB OHCI 0001:10:18.0 disabled by firmware [ 49.215783] Apple USB OHCI 0001:10:19.0 disabled by firmware [ 49.215793] PCI: Enabling device 0001:10:1a.0 (0000 -> 0002) [ 49.215810] ohci_hcd 0001:10:1a.0: OHCI Host Controller [ 49.216675] ohci_hcd 0001:10:1a.0: new USB bus registered, assigned bus number 1 [ 49.216692] ohci_hcd 0001:10:1a.0: irq 29, io mem 0x80083000 [ 49.258628] hub 1-0:1.0: USB hub found [ 49.258652] hub 1-0:1.0: 2 ports detected [ 49.492271] PCI: Enabling device 0001:10:1b.0 (0000 -> 0002) [ 49.492293] ohci_hcd 0001:10:1b.0: OHCI Host Controller [ 49.492489] ohci_hcd 0001:10:1b.0: new USB bus registered, assigned bus number 2 [ 49.492505] ohci_hcd 0001:10:1b.0: irq 63, io mem 0x80082000 [ 49.497714] ieee1394: Initialized config rom entry `ip1394' [ 49.545983] hub 2-0:1.0: USB hub found [ 49.546006] hub 2-0:1.0: 3 ports detected [ 49.647195] PCI: Enabling device 0001:10:1b.1 (0000 -> 0002) [ 49.647218] ohci_hcd 0001:10:1b.1: OHCI Host Controller [ 49.647367] ohci_hcd 0001:10:1b.1: new USB bus registered, assigned bus number 3 [ 49.647381] ohci_hcd 0001:10:1b.1: irq 63, io mem 0x80081000 [ 49.682986] hub 3-0:1.0: USB hub found [ 49.683001] hub 3-0:1.0: 2 ports detected [ 49.791599] PCI: Enabling device 0001:10:1b.2 (0004 -> 0006) [ 49.791620] ehci_hcd 0001:10:1b.2: EHCI Host Controller [ 49.815282] ehci_hcd 0001:10:1b.2: new USB bus registered, assigned bus number 4 [ 49.815300] ehci_hcd 0001:10:1b.2: irq 63, io mem 0x80080000 [ 49.815312] ehci_hcd 0001:10:1b.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 49.815651] hub 4-0:1.0: USB hub found [ 49.815668] hub 4-0:1.0: 5 ports detected [ 49.920334] ohci1394: $Rev: 1313 $ Ben Collins [ 49.920366] PCI: Enabling device 0002:20:0e.0 (0000 -> 0002) [ 49.920783] ohci1394: fw-host0: Unexpected PCI resource length of 1000! [ 49.972371] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[40] MMIO=[f5000000-f50007ff] Max Packet=[2048] [ 50.211877] kjournald starting. Commit interval 5 seconds [ 50.211897] EXT3-fs: mounted filesystem with ordered data mode. [ 51.210964] usb 2-1: new low speed USB device using ohci_hcd and address 3 [ 51.251205] ieee1394: Host added: ID:BUS[0-00:1023] GUID[000d93fffe4e3054] [ 60.764391] ts: Compaq touchscreen protocol output [ 63.397108] Linux agpgart interface v0.101 (c) Dave Jones [ 63.398664] agpgart: Detected Apple UniNorth 2 chipset [ 63.398736] agpgart: configuring for size idx: 4 [ 63.398784] agpgart: AGP aperture is 16M @ 0x0 [ 64.827125] usbcore: registered new driver hiddev [ 64.839727] sungem.c:v0.98 8/24/03 David S. Miller (davem at redhat.com) [ 64.861791] input: Logitech USB Receiver as /class/input/input1 [ 64.862001] input: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0001:10:1b.0-1 [ 64.881637] input: Logitech USB Receiver as /class/input/input2 [ 64.882038] input: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0001:10:1b.0-1 [ 64.882055] usbcore: registered new driver usbhid [ 64.882059] drivers/usb/input/hid-core.c: v2.6:USB HID core driver [ 65.011295] PHY ID: 4061e4, addr: 0 [ 65.012198] eth0: Sun GEM (PCI) 10/100/1000BaseT Ethernet 00:0d:93:4e:30:54 [ 65.012207] eth0: Found BCM5221 PHY [ 65.845158] apm_emu: APM Emulation 0.5 initialized. [ 66.140008] SCSI subsystem initialized [ 66.148211] sbp2: $Rev: 1306 $ Ben Collins [ 66.148219] ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1) [ 66.148223] ieee1394: sbp2: Try serialize_io=0 for better performance [ 66.400513] input: PowerMac Beep as /class/input/input3 [ 66.877583] Adding 501288k swap on /dev/hda3. Priority:-1 extents:1 across:501288k [ 66.909453] NET: Registered protocol family 17 [ 67.071090] EXT3 FS on hda4, internal journal [ 67.411068] eth0: Link is up at 100 Mbps, full-duplex. [ 67.411077] eth0: Pause is disabled [ 67.444544] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 [ 67.444552] md: bitmap version 4.39 [ 68.479152] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel at redhat.com [ 69.942339] hdb: packet command error: status=0x51 { DriveReady SeekComplete Error } [ 69.942350] hdb: packet command error: error=0x54 { AbortedCommand LastFailedSense=0x05 } [ 69.942356] ide: failed opcode was: unknown [ 69.942708] cdrom: open failed. [ 70.652779] HFS+-fs: write access to a jounaled filesystem is not supported, use the force option at your own risk, mounting read-only. [ 71.620667] NET: Registered protocol family 10 [ 71.620812] lo: Disabled Privacy Extensions [ 71.621027] IPv6 over IPv4 tunneling driver [ 80.893947] lp: driver loaded but no devices found [ 81.349652] ppdev: user-space parallel port driver [ 81.751411] [drm] Initialized drm 1.0.1 20051102 [ 81.795795] [drm] Initialized radeon 1.24.0 20060225 on minor 0 [ 82.330948] eth0: no IPv6 routers present lspci output: 0000:00:0b.0 Host bridge: Apple Computer Inc. UniNorth 2 AGP Flags: bus master, 66MHz, medium devsel, latency 16 Capabilities: 0000:00:10.0 VGA compatible controller: ATI Technologies Inc RV280 [Radeon 9200] (rev 01) (prog-if 00 [VGA]) Subsystem: ATI Technologies Inc RV280 [Radeon 9200] Flags: bus master, 66MHz, medium devsel, latency 255, IRQ 48 Memory at 98000000 (32-bit, prefetchable) [size=128M] I/O ports at f0000400 [size=256] Memory at 90000000 (32-bit, non-prefetchable) [size=64K] Expansion ROM at f1000000 [disabled] [size=128K] Capabilities: 0001:10:0b.0 Host bridge: Apple Computer Inc. UniNorth 2 PCI Flags: bus master, 66MHz, medium devsel, latency 16 0001:10:17.0 ff00: Apple Computer Inc. KeyLargo/Intrepid Mac I/O Flags: bus master, medium devsel, latency 16 Memory at 80000000 (32-bit, non-prefetchable) [size=512K] 0001:10:18.0 USB Controller: Apple Computer Inc. KeyLargo/Intrepid USB (prog-if 10 [OHCI]) Flags: medium devsel 0001:10:19.0 USB Controller: Apple Computer Inc. KeyLargo/Intrepid USB (prog-if 10 [OHCI]) Flags: medium devsel 0001:10:1a.0 USB Controller: Apple Computer Inc. KeyLargo/Intrepid USB (prog-if 10 [OHCI]) Flags: bus master, medium devsel, latency 16, IRQ 29 Memory at 80083000 (32-bit, non-prefetchable) [size=4K] 0001:10:1b.0 USB Controller: NEC Corporation USB (rev 43) (prog-if 10 [OHCI]) Subsystem: NEC Corporation USB Flags: bus master, medium devsel, latency 16, IRQ 63 Memory at 80082000 (32-bit, non-prefetchable) [size=4K] Capabilities: 0001:10:1b.1 USB Controller: NEC Corporation USB (rev 43) (prog-if 10 [OHCI]) Subsystem: NEC Corporation USB Flags: bus master, medium devsel, latency 16, IRQ 63 Memory at 80081000 (32-bit, non-prefetchable) [size=4K] Capabilities: 0001:10:1b.2 USB Controller: NEC Corporation USB 2.0 (rev 04) (prog-if 20 [EHCI]) Subsystem: NEC Corporation USB 2.0 Flags: bus master, medium devsel, latency 16, IRQ 63 Memory at 80080000 (32-bit, non-prefetchable) [size=256] Capabilities: 0002:20:0b.0 Host bridge: Apple Computer Inc. UniNorth 2 Internal PCI Flags: bus master, 66MHz, medium devsel, latency 16 0002:20:0d.0 ff00: Apple Computer Inc. UniNorth/Intrepid ATA/100 Flags: bus master, medium devsel, latency 32, IRQ 39 Memory at f5004000 (32-bit, non-prefetchable) [size=16K] 0002:20:0e.0 FireWire (IEEE 1394): Apple Computer Inc. UniNorth 2 FireWire (rev 81) (prog-if 10 [OHCI]) Subsystem: Apple Computer Inc. iBook G4 2004 Flags: bus master, medium devsel, latency 64, IRQ 40 Memory at f5000000 (32-bit, non-prefetchable) [size=4K] Capabilities: 0002:20:0f.0 Ethernet controller: Apple Computer Inc. UniNorth 2 GMAC (Sun GEM) (rev 80) Flags: bus master, 66MHz, slow devsel, latency 16, IRQ 41 Memory at f5200000 (32-bit, non-prefetchable) [size=2M] Expansion ROM at f5100000 [disabled] [size=1M] ** Affects: linux-meta (Ubuntu) Importance: Untriaged Status: Unconfirmed -- MiniMac doesn't boot without monitor https://launchpad.net/bugs/51519 From unaiur at gmail.com Sat Jul 1 20:16:32 2006 From: unaiur at gmail.com (Unai Uribarri) Date: Sat, 01 Jul 2006 20:16:32 -0000 Subject: [Bug 51519] Re: MiniMac doesn't boot without monitor References: <20060701183539.17054.35711.malonedeb@gangotri.ubuntu.com> Message-ID: <20060701201632.17086.67465.malone@gangotri.ubuntu.com> The kernel boots adding this option to the boot line: video=radeonfb:ignore_edid But then, when I turn on the monitor it can work only at 640x480. I've to reboot the machine to get it working at higher resolutions. -- MiniMac doesn't boot without monitor https://launchpad.net/bugs/51519 From kleeman at cims.nyu.edu Sat Jul 1 22:10:03 2006 From: kleeman at cims.nyu.edu (Richard Kleeman) Date: Sat, 01 Jul 2006 22:10:03 -0000 Subject: [Bug 41061] Re: aic7xxx fails to load References: <20060424090127.17643.31977.malonedeb@gandwana.ubuntu.com> Message-ID: <20060701221003.17086.45392.malone@gangotri.ubuntu.com> This problem also occured for the aic79xx driver but was fixed in the release 2.6.15 kernel. It reappeared in the Edgy 2.6.17 kernel. See bug # 50684. -- aic7xxx fails to load https://launchpad.net/bugs/41061 From kjdash at gmail.com Sun Jul 2 07:10:10 2006 From: kjdash at gmail.com (kjdash) Date: Sun, 02 Jul 2006 07:10:10 -0000 Subject: [Bug 36461] Re: XOrg dualhead regression References: <20060324174628.6253.87338.malonedeb@gandwana.ubuntu.com> Message-ID: <20060702071010.17086.88620.malone@gangotri.ubuntu.com> I have the same problem. Dual head worked fine under 5.10 (with some tweaking) AGP ATI RAGE, and VGA output of PCI radeon r100 Only one screen (AGP) works (snappy fast though, yay ubuntu) let me know what I need to post to clarify. -- XOrg dualhead regression https://launchpad.net/bugs/36461 From martin.bergner at online.de Sun Jul 2 09:00:36 2006 From: martin.bergner at online.de (Martin Bergner) Date: Sun, 02 Jul 2006 09:00:36 -0000 Subject: [Bug 50180] Re: high cpu on xorg (~40%) References: <20060618070639.20041.4952.malonedeb@gangotri.ubuntu.com> Message-ID: <20060702090036.17086.47839.malone@gangotri.ubuntu.com> I have the same problem on a samsung x20 with the 2.6.15-25 kernel, the 2.6.15-23 works without a problem, though! -- high cpu on xorg (~40%) https://launchpad.net/bugs/50180 From aj504 at student.cs.york.ac.uk Sun Jul 2 10:53:20 2006 From: aj504 at student.cs.york.ac.uk (Alan Jenkins) Date: Sun, 02 Jul 2006 10:53:20 -0000 Subject: [Bug 48174] Re: linux-image-2.6.15-23-k7 References: <20060603080642.2224.78617.malonedeb@gangotri.ubuntu.com> Message-ID: <20060702105321.17054.6696.launchpad@gangotri.ubuntu.com> ** Attachment added: "Full serial console capture" http://librarian.launchpad.net/3204568/capture.txt -- linux-image-2.6.15-23-k7 https://launchpad.net/bugs/48174 From robinud at volja.net Sun Jul 2 10:58:04 2006 From: robinud at volja.net (=?utf-8?q?David_Bala=C5=BEic?=) Date: Sun, 02 Jul 2006 10:58:04 -0000 Subject: [Bug 30007] Re: USB floppy automounting takes very long References: <20060129191814.9306.43457.malonedeb@gandwana.ubuntu.com> Message-ID: <20060702105804.17086.84286.malone@gangotri.ubuntu.com> I tried the Dapper i386 Desktop Cd live environment and experienced the same problem : doubleclick on the floppy icon na dit takes about a minute to do something and then it does NOT open the floppy contents. Doubleclicking it again finaly opens the contents. (file list window). The same happens with the other floppy unit, which is an ATA floppy (LS-120). During the long "something" it does not wait on error or like, but actually reads the floppy. Click..click...click... like when formatting or doing a sector copy. After a while I started counting the clicks and counted 21. So there were at least 40 clicks or more, meaning, at least half of the floppy was read in. -- USB floppy automounting takes very long https://launchpad.net/bugs/30007 From aj504 at student.cs.york.ac.uk Sun Jul 2 14:20:42 2006 From: aj504 at student.cs.york.ac.uk (Alan Jenkins) Date: Sun, 02 Jul 2006 14:20:42 -0000 Subject: [Bug 48174] Re: linux-image-2.6.15-23-k7 References: <20060603080642.2224.78617.malonedeb@gangotri.ubuntu.com> Message-ID: <20060702142042.17054.40837.malone@gangotri.ubuntu.com> Confirmed absence in linux-image-2.6.12-9-k7. I'm about to experience the wonder of git-bisect, just as soon as I've cloned linus's git repo over dialup. -- linux-image-2.6.15-23-k7 https://launchpad.net/bugs/48174 From mamh at gmx.at Sun Jul 2 16:08:21 2006 From: mamh at gmx.at (mh) Date: Sun, 02 Jul 2006 16:08:21 -0000 Subject: [Bug 39315] Re: Keyboard random repeat References: <20060412160910.15436.50293.malonedeb@gangotri.ubuntu.com> Message-ID: <20060702160821.17054.70169.malone@gangotri.ubuntu.com> sudo echo mem > /sys/power/state -> permission denied linux is ardous -- Keyboard random repeat https://launchpad.net/bugs/39315 From chotchki at mail.usf.edu Sun Jul 2 16:58:27 2006 From: chotchki at mail.usf.edu (chotchki) Date: Sun, 02 Jul 2006 16:58:27 -0000 Subject: [Bug 34902] Re: Ralink Wireless USB/PCMCIA/PCI hangs PC References: <20060314143545.30082.52680.malonedeb@gandwana.ubuntu.com> Message-ID: <20060702165827.17054.89600.malone@gangotri.ubuntu.com> Is this bug fixed or not? I see the status changed but I have yet to see a fix commited or commented on in the notes. -- Ralink Wireless USB/PCMCIA/PCI hangs PC https://launchpad.net/bugs/34902 From rondom at rondom.de Sun Jul 2 17:26:41 2006 From: rondom at rondom.de (Andreas Gnau) Date: Sun, 02 Jul 2006 17:26:41 -0000 Subject: [Bug 51611] ATI Radeon X300 not correctly recognized References: <20060702172641.17086.26128.malonedeb@gangotri.ubuntu.com> Message-ID: <20060702172641.17086.26128.malonedeb@gangotri.ubuntu.com> Public bug reported: When running glxinfo the following message is one of the error messages that appear. Unknown device ID 5B60, please report. Assuming plain R300. My card is an ATI Radeon X300. This is what (non-verbose) lspci says: 0000:02:00.0 VGA compatible controller: ATI Technologies Inc RV370 5B60 [Radeon X300 (PCIE)] 0000:02:00.1 Display controller: ATI Technologies Inc RV370 [Radeon X300SE] PCI-Ids are 1002:5b60 and 1002:5b70. ** Affects: linux-source-2.6.15 (Ubuntu) Importance: Untriaged Status: Unconfirmed -- ATI Radeon X300 not correctly recognized https://launchpad.net/bugs/51611 From florian at boucault.ath.cx Sun Jul 2 17:30:05 2006 From: florian at boucault.ath.cx (Kaleo) Date: Sun, 02 Jul 2006 17:30:05 -0000 Subject: [Bug 50031] Re: [regression] Suspend [to-RAM and to-disk] is broken in 2.6.15-25.43 References: <20060616182146.13137.51951.malonedeb@gandwana.ubuntu.com> Message-ID: <20060702173005.17054.40934.malone@gangotri.ubuntu.com> Thinkpad T43 1871-W34 and also an R52 still experience the same bug. They half-suspend (fan still on and reactive to SysRQ) most of the time (sometimes just work fine!). -- [regression] Suspend [to-RAM and to-disk] is broken in 2.6.15-25.43 https://launchpad.net/bugs/50031 From rondom at rondom.de Sun Jul 2 17:45:04 2006 From: rondom at rondom.de (Andreas Gnau) Date: Sun, 02 Jul 2006 17:45:04 -0000 Subject: [Bug 51611] Re: ATI Radeon X300 not correctly recognized References: <20060702172641.17086.26128.malonedeb@gangotri.ubuntu.com> Message-ID: <20060702174504.17086.37936.malone@gangotri.ubuntu.com> This is the partial output of glxinfo: name of display: :0.0 Unknown device ID 5B60, please report. Assuming plain R300. libGL warning: 3D driver claims to not support visual 0x23 libGL warning: 3D driver claims to not support visual 0x24 libGL warning: 3D driver claims to not support visual 0x25 libGL warning: 3D driver claims to not support visual 0x26 libGL warning: 3D driver claims to not support visual 0x27 libGL warning: 3D driver claims to not support visual 0x28 libGL warning: 3D driver claims to not support visual 0x29 libGL warning: 3D driver claims to not support visual 0x2a libGL warning: 3D driver claims to not support visual 0x2b libGL warning: 3D driver claims to not support visual 0x2c libGL warning: 3D driver claims to not support visual 0x2d libGL warning: 3D driver claims to not support visual 0x2e libGL warning: 3D driver claims to not support visual 0x2f libGL warning: 3D driver claims to not support visual 0x30 libGL warning: 3D driver claims to not support visual 0x31 libGL warning: 3D driver claims to not support visual 0x32 *********************************WARN_ONCE********************************* File r300_state.c function r300Enable line 456 TODO - double side stencil ! *************************************************************************** No ctx->FragmentProgram._Current!! display: :0 screen: 0 direct rendering: Yes [... snip...] -- ATI Radeon X300 not correctly recognized https://launchpad.net/bugs/51611 From aneesh.kumar at gmail.com Sun Jul 2 17:45:46 2006 From: aneesh.kumar at gmail.com (Aneesh Kumar K.V) Date: Sun, 02 Jul 2006 17:45:46 -0000 Subject: [Bug 51472] Re: kernel BUG at mm/filemap.c:463! References: <20060630222258.17054.79730.malonedeb@gangotri.ubuntu.com> Message-ID: <20060702174547.17054.48607.launchpad@gangotri.ubuntu.com> ** Attachment added: "I got a little different one" http://librarian.launchpad.net/3206002/crash.log -- kernel BUG at mm/filemap.c:463! https://launchpad.net/bugs/51472 From kirjanov at gmail.com Sun Jul 2 18:08:12 2006 From: kirjanov at gmail.com (Kirjanov D.A.) Date: Sun, 02 Jul 2006 18:08:12 -0000 Subject: [Bug 51611] Re: ATI Radeon X300 not correctly recognized References: <20060702172641.17086.26128.malonedeb@gangotri.ubuntu.com> Message-ID: <20060702180812.17054.27150.malone@gangotri.ubuntu.com> do you install fglrx driver? -- ATI Radeon X300 not correctly recognized https://launchpad.net/bugs/51611 From rondom at rondom.de Sun Jul 2 18:09:18 2006 From: rondom at rondom.de (Andreas Gnau) Date: Sun, 02 Jul 2006 18:09:18 -0000 Subject: [Bug 51611] Re: ATI Radeon X300 not correctly recognized References: <20060702172641.17086.26128.malonedeb@gangotri.ubuntu.com> Message-ID: <20060702180918.17086.32349.malone@gangotri.ubuntu.com> No! -- ATI Radeon X300 not correctly recognized https://launchpad.net/bugs/51611 From crimsun at fungus.sh.nu Sun Jul 2 19:12:07 2006 From: crimsun at fungus.sh.nu (Daniel T Chen) Date: Sun, 02 Jul 2006 19:12:07 -0000 Subject: [Bug 34831] Re: Hardlock of entire system (Dapper Flight 5) References: <20060314003317.30057.9117.malonedeb@gandwana.ubuntu.com> Message-ID: <20060702191207.17086.38758.malone@gangotri.ubuntu.com> https://bugtrack.alsa-project.org/alsa-bug/view.php?id=952 ** Bug watch added: Debian Bug tracker #376382 http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=376382 ** Also affects: alsa-driver (Debian) via http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=376382 Importance: Unknown Status: Unknown -- Hardlock of entire system (Dapper Flight 5) https://launchpad.net/bugs/34831 From rondom at rondom.de Sun Jul 2 20:11:56 2006 From: rondom at rondom.de (Andreas Gnau) Date: Sun, 02 Jul 2006 20:11:56 -0000 Subject: [Bug 51611] Re: ATI Radeon X300 not correctly recognized References: <20060702172641.17086.26128.malonedeb@gangotri.ubuntu.com> Message-ID: <20060702201156.17086.1788.malone@gangotri.ubuntu.com> I've reread this bugreport and saw that I accidentally filed this under linux-source instead of xserver-xorg-driver-ati which seems to be the more appropriate location to me. Must have been due to looking if this is already a know prob. -- ATI Radeon X300 not correctly recognized https://launchpad.net/bugs/51611 From xavier.verne at free.fr Sun Jul 2 20:20:11 2006 From: xavier.verne at free.fr (Xavier Verne) Date: Sun, 02 Jul 2006 20:20:11 -0000 Subject: [Bug 39343] Re: ndiswrapper not working for intel 3945G in Dapper flight 6 References: <20060412204053.15436.55221.malonedeb@gangotri.ubuntu.com> Message-ID: <20060702202011.17086.7201.malone@gangotri.ubuntu.com> This bug can be closed Ben, ipw3945G native support works flawlessly AFAIK. -- ndiswrapper not working for intel 3945G in Dapper flight 6 https://launchpad.net/bugs/39343 From acojlo at gmail.com Sun Jul 2 21:40:11 2006 From: acojlo at gmail.com (Aleksandar) Date: Sun, 02 Jul 2006 21:40:11 -0000 Subject: [Bug 6554] Re: fan control does not work at fjs amilo pro v2030 References: <20060108190635.15096.7426.malonedeb@gangotri.ubuntu.com> Message-ID: <20060702214011.17054.53877.malone@gangotri.ubuntu.com> I have solved this problem. Now I have working fan control which is working automaticaly. Because the solution is in the long text, I will post link here, and soon I hope I will post wiki: http://laptopsurf.blogspot.com/2006/06/fujitsu-siemens-amilo-pro-2030-on.html -- fan control does not work at fjs amilo pro v2030 https://launchpad.net/bugs/6554 From stefan at sun.ac.za Sun Jul 2 23:00:00 2006 From: stefan at sun.ac.za (Stefan van der Walt) Date: Sun, 02 Jul 2006 23:00:00 -0000 Subject: [Bug 51642] Sluggish keyboard with 2.6.15-25 References: <20060702230001.17054.41163.malonedeb@gangotri.ubuntu.com> Message-ID: <20060702230001.17054.41163.malonedeb@gangotri.ubuntu.com> Public bug reported: Ever since upgrading to 2.6.15-25, the keyboard response of my Fujitsu Amilo P notebook is somewhat sluggish. I had no keyboard problems with 2.6.15-22. I see no strange error messages in the syslog, except for this message: Jul 3 00:51:21 localhost kernel: [17180738.092000] hda: cdrom_pc_intr: The drive appears confused (ireason = 0x01) which pops up every 30 seconds or so (the only reason I mention this, which seems irrelevant, is because of potential IRQ problems). I tried without any kernel options, as well as with i8024.nomux ec_intr=0 pci=noacpi irqpoll but to no avail. ** Affects: linux-source-2.6.15 (Ubuntu) Importance: Untriaged Status: Unconfirmed -- Sluggish keyboard with 2.6.15-25 https://launchpad.net/bugs/51642 From palopezv at gmail.com Sun Jul 2 23:25:40 2006 From: palopezv at gmail.com (=?utf-8?q?Pedro_Alejandro_L=C3=B3pez-Valencia?=) Date: Sun, 02 Jul 2006 23:25:40 -0000 Subject: [Bug 49772] Re: kernel lacks support for IP100A chipsets in sundance driver References: <20060614213643.31244.47820.malonedeb@gandwana.ubuntu.com> Message-ID: <20060702232540.17054.55011.malone@gangotri.ubuntu.com> This patch is already in 2.6.17-git10: http://www.kernel.org/git/?p=linux/kernel/git/torvalds/linux-2.6.git;a=blob;h=643fceae3db5d8eb6a00686d39c37f56b3724725;hb=4ebd9ab387b39c44165cd296a6637082a4f0f66a;f=drivers/net/sundance.c -- kernel lacks support for IP100A chipsets in sundance driver https://launchpad.net/bugs/49772 From knockknock718 at aol.com Sun Jul 2 23:45:19 2006 From: knockknock718 at aol.com (knockknock718) Date: Sun, 02 Jul 2006 23:45:19 -0000 Subject: [Bug 13872] Re: nvidia drivers fails to load References: <20060113133336.21012.29278.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060702234519.17054.78038.launchpad@gangotri.ubuntu.com> ** Changed in: Ubuntu Dapper Assignee: (unassigned) => knockknock718 Status: Unconfirmed => Fix Committed -- nvidia drivers fails to load https://launchpad.net/bugs/13872 From ljlbox at tiscali.it Mon Jul 3 01:49:22 2006 From: ljlbox at tiscali.it (Lorenzo J. Lucchini) Date: Mon, 03 Jul 2006 01:49:22 -0000 Subject: [Bug 39315] Re: Keyboard random repeat References: <20060412160910.15436.50293.malonedeb@gangotri.ubuntu.com> Message-ID: <20060703014922.17054.85434.malone@gangotri.ubuntu.com> A command such as "sudo echo mem >/sys/power/state" causes the command "sudo echo mem" to be executed, and its output redirected to /sys/power/state. If you read the above carefully, you'll realize that the redirection does *not* happen as root: "echo mem" is executed as root, because sudo does that, but the redirection is done by the shell. You probably want something like sudo -c sh "echo mem >/sys/power/state" -- Keyboard random repeat https://launchpad.net/bugs/39315 From barry at voeten.com Mon Jul 3 03:06:12 2006 From: barry at voeten.com (ichnaton) Date: Mon, 03 Jul 2006 03:06:12 -0000 Subject: [Bug 37163] Re: Ipods react badly to checks for EFI partition tables References: <20060329132453.6279.44854.malonedeb@gandwana.ubuntu.com> Message-ID: <20060703030612.17054.23397.malone@gangotri.ubuntu.com> Same problem is here for the Cowon iAUDIO 6. This is also a USB disk device to play mp3/ogg etc. Jul 3 04:34:46 flamingo kernel: [17179683.720000] usb 3-8: new high speed USB device using ehci_hcd and address 4 Jul 3 04:34:46 flamingo kernel: [17179683.968000] usb 3-8: new high speed USB device using ehci_hcd and address 5 Jul 3 04:34:46 flamingo kernel: [17179684.324000] scsi4 : SCSI emulation for USB Mass Storage devices Jul 3 04:34:51 flamingo kernel: [17179689.360000] Vendor: COWON Model: iAUDIO 6 Rev: 0100 Jul 3 04:34:51 flamingo kernel: [17179689.360000] Type: Direct-Access ANSI SCSI revision: 00 Jul 3 04:34:51 flamingo kernel: [17179689.360000] SCSI device sda: 7855648 512-byte hdwr sectors (4022 MB) Jul 3 04:34:51 flamingo kernel: [17179689.360000] sda: Write Protect is off Jul 3 04:34:51 flamingo kernel: [17179689.364000] SCSI device sda: 7855648 512-byte hdwr sectors (4022 MB) Jul 3 04:34:51 flamingo kernel: [17179689.364000] sda: Write Protect is off Jul 3 04:34:51 flamingo kernel: [17179689.364000] sda:<6>usb 3-8: reset high speed USB device using ehci_hcd and address 5 Jul 3 04:34:52 flamingo kernel: [17179689.880000] usb 3-8: reset high speed USB device using ehci_hcd and address 5 Jul 3 04:34:52 flamingo kernel: [17179690.300000] usb 3-8: reset high speed USB device using ehci_hcd and address 5 Jul 3 04:34:53 flamingo kernel: [17179690.664000] usb 3-8: reset high speed USB device using ehci_hcd and address 5 Jul 3 04:34:53 flamingo kernel: [17179691.032000] usb 3-8: reset high speed USB device using ehci_hcd and address 5 Jul 3 04:34:53 flamingo kernel: [17179691.288000] sd 4:0:0:0: SCSI error: return code = 0x70000 Jul 3 04:34:53 flamingo kernel: [17179691.288000] end_request: I/O error, dev sda, sector 0 Jul 3 04:34:53 flamingo kernel: [17179691.296000] unable to read partition table Jul 3 04:34:53 flamingo kernel: [17179691.296000] sd 4:0:0:0: Attached scsi removable disk sda Jul 3 04:34:53 flamingo kernel: [17179691.296000] sd 4:0:0:0: Attached scsi generic sg0 type 0 Jul 3 04:34:53 flamingo kernel: [17179691.548000] usb 3-8: reset high speed USB device using ehci_hcd and address 5 Jul 3 04:34:54 flamingo kernel: [17179691.916000] usb 3-8: reset high speed USB device using ehci_hcd and address 5 Jul 3 04:34:54 flamingo kernel: [17179692.280000] usb 3-8: reset high speed USB device using ehci_hcd and address 5 Jul 3 04:34:55 flamingo kernel: [17179692.648000] usb 3-8: reset high speed USB device using ehci_hcd and address 5 Jul 3 04:34:55 flamingo kernel: [17179693.016000] usb 3-8: reset high speed USB device using ehci_hcd and address 5 Jul 3 04:34:55 flamingo kernel: [17179693.272000] sd 4:0:0:0: SCSI error: return code = 0x70000 Jul 3 04:34:55 flamingo kernel: [17179693.272000] end_request: I/O error, dev sda, sector 64 Jul 3 04:34:55 flamingo kernel: [17179693.384000] usb 3-8: reset high speed USB device using ehci_hcd and address 5 Jul 3 04:34:56 flamingo kernel: [17179693.752000] usb 3-8: reset high speed USB device using ehci_hcd and address 5 Jul 3 04:34:56 flamingo kernel: [17179694.116000] usb 3-8: reset high speed USB device using ehci_hcd and address 5 Jul 3 04:34:56 flamingo kernel: [17179694.484000] usb 3-8: reset high speed USB device using ehci_hcd and address 5 Jul 3 04:34:57 flamingo kernel: [17179694.852000] usb 3-8: reset high speed USB device using ehci_hcd and address 5 Jul 3 04:34:57 flamingo kernel: [17179695.108000] sd 4:0:0:0: SCSI error: return code = 0x70000 Jul 3 04:34:57 flamingo kernel: [17179695.108000] end_request: I/O error, dev sda, sector 72 Jul 3 04:34:57 flamingo kernel: [17179695.220000] usb 3-8: reset high speed USB device using ehci_hcd and address 5 Jul 3 04:34:57 flamingo kernel: [17179695.588000] usb 3-8: reset high speed USB device using ehci_hcd and address 5 Jul 3 04:34:58 flamingo kernel: [17179695.952000] usb 3-8: reset high speed USB device using ehci_hcd and address 5 Jul 3 04:34:58 flamingo kernel: [17179696.320000] usb 3-8: reset high speed USB device using ehci_hcd and address 5 Jul 3 04:34:59 flamingo kernel: [17179696.688000] usb 3-8: reset high speed USB device using ehci_hcd and address 5 Jul 3 04:34:59 flamingo kernel: [17179696.940000] sd 4:0:0:0: SCSI error: return code = 0x70000 Jul 3 04:34:59 flamingo kernel: [17179696.940000] end_request: I/O error, dev sda, sector 80 Jul 3 04:34:59 flamingo kernel: [17179697.056000] usb 3-8: reset high speed USB device using ehci_hcd and address 5 Jul 3 04:34:59 flamingo kernel: [17179697.420000] usb 3-8: reset high speed USB device using ehci_hcd and address 5 Jul 3 04:35:00 flamingo kernel: [17179697.788000] usb 3-8: reset high speed USB device using ehci_hcd and address 5 Jul 3 04:35:00 flamingo kernel: [17179698.156000] usb 3-8: reset high speed USB device using ehci_hcd and address 5 : Jul 3 04:35:00 flamingo kernel: [17179698.524000] usb 3-8: reset high speed USB device using ehci_hcd and address 5 Jul 3 04:35:01 flamingo kernel: [17179698.776000] sd 4:0:0:0: SCSI error: return code = 0x70000 Jul 3 04:35:01 flamingo kernel: [17179698.776000] end_request: I/O error, dev sda, sector 88 Jul 3 04:35:01 flamingo kernel: [17179698.892000] usb 3-8: reset high speed USB device using ehci_hcd and address 5 Jul 3 04:35:01 flamingo kernel: [17179699.256000] usb 3-8: reset high speed USB device using ehci_hcd and address 5 Jul 3 04:35:01 flamingo kernel: [17179699.624000] usb 3-8: reset high speed USB device using ehci_hcd and address 5 Jul 3 04:35:02 flamingo kernel: [17179699.992000] usb 3-8: reset high speed USB device using ehci_hcd and address 5 Jul 3 04:35:02 flamingo kernel: [17179700.360000] usb 3-8: reset high speed USB device using ehci_hcd and address 5 Jul 3 04:35:02 flamingo kernel: [17179700.612000] sd 4:0:0:0: SCSI error: return code = 0x70000 Jul 3 04:35:02 flamingo kernel: [17179700.612000] end_request: I/O error, dev sda, sector 96 Jul 3 04:35:03 flamingo kernel: [17179700.724000] usb 3-8: reset high speed USB device using ehci_hcd and address 5 Jul 3 04:35:03 flamingo kernel: [17179701.092000] usb 3-8: reset high speed USB device using ehci_hcd and address 5 Jul 3 04:35:02 flamingo kernel: [17179701.460000] usb 3-8: reset high speed USB device using ehci_hcd and address 5 Jul 3 04:35:02 flamingo kernel: [17179701.828000] usb 3-8: reset high speed USB device using ehci_hcd and address 5 Jul 3 04:35:03 flamingo kernel: [17179702.196000] usb 3-8: reset high speed USB device using ehci_hcd and address 5 Jul 3 04:35:03 flamingo kernel: [17179702.448000] sd 4:0:0:0: SCSI error: return code = 0x70000 Jul 3 04:35:03 flamingo kernel: [17179702.448000] end_request: I/O error, dev sda, sector 104 Jul 3 04:35:03 flamingo kernel: [17179702.560000] usb 3-8: reset high speed USB device using ehci_hcd and address 5 Jul 3 04:35:03 flamingo kernel: [17179702.928000] usb 3-8: reset high speed USB device using ehci_hcd and address 5 Jul 3 04:35:04 flamingo kernel: [17179703.296000] usb 3-8: reset high speed USB device using ehci_hcd and address 5 Jul 3 04:35:04 flamingo kernel: [17179703.664000] usb 3-8: reset high speed USB device using ehci_hcd and address 5 Jul 3 04:35:04 flamingo kernel: [17179703.872000] tun: Universal TUN/TAP device driver, 1.6 Jul 3 04:35:04 flamingo kernel: [17179703.872000] tun: (C) 1999-2004 Max Krasnyansky Jul 3 04:35:04 flamingo kernel: [17179704.028000] usb 3-8: reset high speed USB device using ehci_hcd and address 5 Jul 3 04:35:05 flamingo kernel: [17179704.284000] sd 4:0:0:0: SCSI error: return code = 0x70000 Jul 3 04:35:05 flamingo kernel: [17179704.284000] end_request: I/O error, dev sda, sector 112 Jul 3 04:35:05 flamingo kernel: [17179704.396000] usb 3-8: reset high speed USB device using ehci_hcd and address 5 Jul 3 04:35:05 flamingo kernel: [17179704.764000] usb 3-8: reset high speed USB device using ehci_hcd and address 5 Jul 3 04:35:06 flamingo kernel: [17179705.132000] usb 3-8: reset high speed USB device using ehci_hcd and address 5 Jul 3 04:35:06 flamingo kernel: [17179705.500000] usb 3-8: reset high speed USB device using ehci_hcd and address 5 Jul 3 04:35:06 flamingo kernel: [17179705.864000] usb 3-8: reset high speed USB device using ehci_hcd and address 5 Jul 3 04:35:07 flamingo kernel: [17179706.120000] sd 4:0:0:0: SCSI error: return code = 0x70000 Jul 3 04:35:07 flamingo kernel: [17179706.120000] end_request: I/O error, dev sda, sector 120 Jul 3 04:35:07 flamingo kernel: [17179706.232000] usb 3-8: reset high speed USB device using ehci_hcd and address 5 Jul 3 04:35:07 flamingo kernel: [17179706.600000] usb 3-8: reset high speed USB device using ehci_hcd and address 5 Jul 3 04:35:07 flamingo kernel: [17179706.968000] usb 3-8: reset high speed USB device using ehci_hcd and address 5 Jul 3 04:35:08 flamingo kernel: [17179707.332000] usb 3-8: reset high speed USB device using ehci_hcd and address 5 Jul 3 04:35:08 flamingo kernel: [17179707.700000] usb 3-8: reset high speed USB device using ehci_hcd and address 5 Jul 3 04:35:08 flamingo kernel: [17179707.956000] sd 4:0:0:0: SCSI error: return code = 0x70000 Jul 3 04:35:08 flamingo kernel: [17179707.956000] end_request: I/O error, dev sda, sector 128 Jul 3 04:35:08 flamingo kernel: [17179708.068000] usb 3-8: reset high speed USB device using ehci_hcd and address 5 Jul 3 04:35:09 flamingo kernel: [17179708.436000] usb 3-8: reset high speed USB device using ehci_hcd and address 5 Jul 3 04:35:09 flamingo kernel: [17179708.804000] usb 3-8: reset high speed USB device using ehci_hcd and address 5 Jul 3 04:35:10 flamingo kernel: [17179709.168000] usb 3-8: reset high speed USB device using ehci_hcd and address 5 Jul 3 04:35:10 flamingo kernel: [17179709.536000] usb 3-8: reset high speed USB device using ehci_hcd and address 5 Jul 3 04:35:10 flamingo kernel: [17179709.792000] sd 4:0:0:0: SCSI error: return code = 0x70000 Jul 3 04:35:10 flamingo kernel: [17179709.792000] end_request: I/O error, dev sda, sector 136 Jul 3 04:35:10 flamingo kernel: [17179709.904000] usb 3-8: reset high speed USB device using ehci_hcd and address 5 Jul 3 04:35:11 flamingo kernel: [17179710.272000] usb 3-8: reset high speed USB device using ehci_hcd and address 5 Jul 3 04:35:11 flamingo kernel: [17179710.640000] usb 3-8: reset high speed USB device using ehci_hcd and address 5 Jul 3 04:35:11 flamingo kernel: [17179711.004000] usb 3-8: reset high speed USB device using ehci_hcd and address 5 Jul 3 04:35:12 flamingo kernel: [17179711.372000] usb 3-8: reset high speed USB device using ehci_hcd and address 5 Jul 3 04:35:12 flamingo kernel: [17179711.628000] sd 4:0:0:0: SCSI error: return code = 0x70000 : -- Ipods react badly to checks for EFI partition tables https://launchpad.net/bugs/37163 From zrchrn at gmail.com Mon Jul 3 03:16:03 2006 From: zrchrn at gmail.com (ihavenoname) Date: Mon, 03 Jul 2006 03:16:03 -0000 Subject: [Bug 34902] Re: Ralink Wireless USB/PCMCIA/PCI hangs PC References: <20060314143545.30082.52680.malonedeb@gandwana.ubuntu.com> Message-ID: <20060703031603.17054.41753.malone@gangotri.ubuntu.com> The problem is in the Ubuntu patches as Debian unstable does not suffer this problem. Is there anyway we can get a kernel that doesn't have the wifi drivers in it? I belive that has alot to do with the instability. Or could someone point me to where I can find the Ubuntu kernel patches and source? -- Ralink Wireless USB/PCMCIA/PCI hangs PC https://launchpad.net/bugs/34902 From dnrpn5802 at sneakemail.com Mon Jul 3 03:45:37 2006 From: dnrpn5802 at sneakemail.com (charles posinoff) Date: Mon, 03 Jul 2006 03:45:37 -0000 Subject: [Bug 30273] Re: linux-image-2.6.15-14-powerpc does not boot on "50 (PowerBook Wallstreet)" References: <20060201225707.3906.28595.malonedeb@gangotri.ubuntu.com> Message-ID: <20060703034537.17086.86528.malone@gangotri.ubuntu.com> Hi -- the Ubuntu package repository seems to only have 2.6.17-3 now (as opposed to a 2.6.16 powerpc binary release) and this exhibits the same "does not boot" issue again. Can you confirm the patch is applied to 2.6.17 as well? Can we resolve this? 2.6.15-23 isn't quite stable with "wake from sleep" and so it would be nice to update to 2.6.17. Thanks again, Chas ** Changed in: linux-source-2.6.15 (Ubuntu) Sourcepackagename: linux-source-2.6.15 => linux-source-2.6.17 Status: Fix Released => Needs Info -- linux-image-2.6.15-14-powerpc does not boot on "50 (PowerBook Wallstreet)" https://launchpad.net/bugs/30273 From nkbj at mail.tele.dk Mon Jul 3 04:05:26 2006 From: nkbj at mail.tele.dk (Niels Kristian Bech Jensen) Date: Mon, 03 Jul 2006 04:05:26 -0000 Subject: [Bug 30273] Re: linux-image-2.6.15-14-powerpc does not boot on "50 (PowerBook Wallstreet)" References: <20060201225707.3906.28595.malonedeb@gangotri.ubuntu.com> Message-ID: <20060703040526.17086.55337.malone@gangotri.ubuntu.com> 2.6.15-25 is in the Dapper repository - 2.6.17 is in the Edgy repository. I think the boot problem is a new issue. I've reported it in bug #50746. The patch was taken from the 2.6.16 tree and should be in 2.6.17 as well. -- linux-image-2.6.15-14-powerpc does not boot on "50 (PowerBook Wallstreet)" https://launchpad.net/bugs/30273 From axl000 at gmail.com Mon Jul 3 04:43:56 2006 From: axl000 at gmail.com (Rodrigo Olivares) Date: Mon, 03 Jul 2006 04:43:56 -0000 Subject: [Bug 37975] Re: Unknown "Conexant id 31" mixer fails to produce audible volume References: <20060404060657.23082.46696.malonedeb@gandwana.ubuntu.com> Message-ID: <20060703044356.17054.83987.malone@gangotri.ubuntu.com> still no solution, please help, i need to join linux but if i have no sound :( ... -- Unknown "Conexant id 31" mixer fails to produce audible volume https://launchpad.net/bugs/37975 From alietss at yahoo.com Mon Jul 3 06:07:30 2006 From: alietss at yahoo.com (aliet) Date: Mon, 03 Jul 2006 06:07:30 -0000 Subject: [Bug 51151] failed the disk partitioning with a raid and adaptec aic-7802p References: <20060627214736.17054.17710.malonedeb@gangotri.ubuntu.com> Message-ID: <20060703060730.17054.58052.launchpad@canonical@gangotri.ubuntu.com> Public bug reported: Binary package hint: debian-installer We are having a severe installer hang, in our servers, using adaptec aic-7802p and raid I2O: Intel Corporation 80960RM, the disk partitioning hangs, and stops, we tested with debian installer for sarge using this: modprobe megaraid modprobe sd_mod and works, and detect our raid. we did this with dapper installer but we still have de thang. any ideas???? ** Affects: linux-source-2.6.15 (Ubuntu) Importance: Untriaged Status: Unconfirmed -- failed the disk partitioning with a raid and adaptec aic-7802p https://launchpad.net/bugs/51151 From fabbione at ubuntu.com Mon Jul 3 06:07:29 2006 From: fabbione at ubuntu.com (Fabio Massimo Di Nitto) Date: Mon, 03 Jul 2006 06:07:29 -0000 Subject: [Bug 51151] Re: failed the disk partitioning with a raid and adaptec aic-7802p References: <20060627214736.17054.17710.malonedeb@gangotri.ubuntu.com> Message-ID: <20060703060729.17054.97929.malone@gangotri.ubuntu.com> Ben this might be the same issue Brian is having. Fabio ** Changed in: debian-installer (Ubuntu) Sourcepackagename: debian-installer => linux-source-2.6.15 -- failed the disk partitioning with a raid and adaptec aic-7802p https://launchpad.net/bugs/51151 From bugwatch at bugs.launchpad.net Mon Jul 3 06:27:58 2006 From: bugwatch at bugs.launchpad.net (Bug Watch Updater) Date: Mon, 03 Jul 2006 06:27:58 -0000 Subject: [Bug 34831] Re: Hardlock of entire system (Dapper Flight 5) References: <20060314003317.30057.9117.malonedeb@gandwana.ubuntu.com> Message-ID: <20060703062806.10729.41476.launchpad@gangotri.ubuntu.com> ** Changed in: alsa-driver (Debian) Status: Unknown => Unconfirmed -- Hardlock of entire system (Dapper Flight 5) https://launchpad.net/bugs/34831 From apeeters at lashout.net Mon Jul 3 07:02:53 2006 From: apeeters at lashout.net (Adriaan Peeters) Date: Mon, 03 Jul 2006 07:02:53 -0000 Subject: [Bug 51665] kernel(?) plays tricks with keyboard lights References: <20060703070253.17054.7698.malonedeb@gangotri.ubuntu.com> Message-ID: <20060703070253.17054.7698.malonedeb@gangotri.ubuntu.com> Public bug reported: I believe it started with the latest kernel: the keyboard lights on my Dell Latitude D505 switch on and off randomly. Their status does not represent the status of num lock, caps lock, scroll lock. I will try to gather more information. ** Affects: linux-source-2.6.15 (Ubuntu) Importance: Untriaged Status: Unconfirmed -- kernel(?) plays tricks with keyboard lights https://launchpad.net/bugs/51665 From nystal at laposte.net Mon Jul 3 07:44:13 2006 From: nystal at laposte.net (gregory bahde) Date: Mon, 03 Jul 2006 07:44:13 -0000 Subject: [Bug 34508] Re: [Bug 34508] Re: 2.6.15 kernel fails to boot on ppc machine References: <20060311210305.30082.75520.malonedeb@gandwana.ubuntu.com> <20060622235849.29464.17580.malone@gandwana.ubuntu.com> Message-ID: <44A8CACD.9050206@laposte.net> So?? there is still no easily working and safe method to install dapper yet?? -- 2.6.15 kernel fails to boot on ppc machine https://launchpad.net/bugs/34508 From jw at jonathanwoolley.com Mon Jul 3 09:26:19 2006 From: jw at jonathanwoolley.com (jono) Date: Mon, 03 Jul 2006 09:26:19 -0000 Subject: [Bug 51674] acx firmware not added to libs after kernel auto-update References: <20060703092619.17054.34057.malonedeb@gangotri.ubuntu.com> Message-ID: <20060703092619.17054.34057.malonedeb@gangotri.ubuntu.com> Public bug reported: Binary package hint: linux-source-2.6.15 I'm running kubuntu dapper and recently let the auto-update upgrade my kernel from 2.6.15-23-386 to 2.6.15-25-386. My acx-111 based wlan stopped working after this. The problem was that /lib/firmware/2.6.15-25-386/acx/ was not created. I copied the 2.6.15-23-386 dir across and tweaked it to use the 1.9.8.b firmware instead of 2.3.1.31 and am back up and running. A minor annoyance for a guru, but a headache for the not-so-experienced user like myself since I didn't really know where to start looking! ** Affects: linux-source-2.6.15 (Ubuntu) Importance: Untriaged Status: Unconfirmed -- acx firmware not added to libs after kernel auto-update https://launchpad.net/bugs/51674 From teppic74 at hotmail.com Mon Jul 3 09:56:56 2006 From: teppic74 at hotmail.com (Barry Shilliday) Date: Mon, 03 Jul 2006 09:56:56 -0000 Subject: [Bug 34902] Re: Ralink Wireless USB/PCMCIA/PCI hangs PC References: <20060314143545.30082.52680.malonedeb@gandwana.ubuntu.com> Message-ID: <20060703095657.17054.13350.malone@gangotri.ubuntu.com> Problem still exists. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Fix Released => Confirmed -- Ralink Wireless USB/PCMCIA/PCI hangs PC https://launchpad.net/bugs/34902 From stephenemslie at gmail.com Mon Jul 3 10:04:52 2006 From: stephenemslie at gmail.com (Stephen Emslie) Date: Mon, 03 Jul 2006 10:04:52 -0000 Subject: [Bug 37975] Re: [Bug 37975] Re: Unknown "Conexant id 31" mixer fails to produce audible volume References: <20060404060657.23082.46696.malonedeb@gandwana.ubuntu.com> <20060703044356.17054.83987.malone@gangotri.ubuntu.com> Message-ID: <51f97e530607030304t6a04e35bs2a428c0406d7d5f4@mail.gmail.com> I wish I could :) I've got the same problem. I've tried installing alsa 1.0.11 with no audible effect, and I've even tried upgrading my kernel to see if that would help. I hope the ubuntu admins manage to sort this out soon! Stephen On 7/3/06, Rodrigo Olivares wrote: > > still no solution, please help, i need to join linux but if i have no > sound :( ... > > -- > Unknown "Conexant id 31" mixer fails to produce audible volume > https://launchpad.net/bugs/37975 > -- Unknown "Conexant id 31" mixer fails to produce audible volume https://launchpad.net/bugs/37975 From phibxr at gmail.com Mon Jul 3 10:08:18 2006 From: phibxr at gmail.com (phibxr) Date: Mon, 03 Jul 2006 10:08:18 -0000 Subject: [Bug 34508] Re: [Bug 34508] Re: [Bug 34508] Re: 2.6.15 kernel fails to boot on ppc machine References: <20060311210305.30082.75520.malonedeb@gandwana.ubuntu.com> <20060622235849.29464.17580.malone@gandwana.ubuntu.com> <44A8CACD.9050206@laposte.net> Message-ID: Probably not. But it's still only july. We won't get a 6.06 probably, but maybe an inofficial 6.07 release party would be handy. ;) 2006/7/3, gregory bahde : > So?? > there is still no easily working and safe method to install dapper yet?? > > -- > 2.6.15 kernel fails to boot on ppc machine > https://launchpad.net/bugs/34508 > -- 2.6.15 kernel fails to boot on ppc machine https://launchpad.net/bugs/34508 From hoser at ozemail.com.au Mon Jul 3 11:26:51 2006 From: hoser at ozemail.com.au (blimpyboy) Date: Mon, 03 Jul 2006 11:26:51 -0000 Subject: [Bug 50898] Re: Can't boot with kernel 2.6.15-25 References: <20060625065126.29559.32737.malonedeb@gandwana.ubuntu.com> Message-ID: <20060703112651.17054.72285.malone@gangotri.ubuntu.com> Anything? -- Can't boot with kernel 2.6.15-25 https://launchpad.net/bugs/50898 From joachim.beckers at belgacom.net Mon Jul 3 11:53:13 2006 From: joachim.beckers at belgacom.net (Joachim Beckers) Date: Mon, 03 Jul 2006 11:53:13 -0000 Subject: [Bug 37163] Re: Ipods react badly to checks for EFI partition tables References: <20060329132453.6279.44854.malonedeb@gandwana.ubuntu.com> Message-ID: <20060703115313.17054.95756.malone@gangotri.ubuntu.com> with/without a hub? is there an enrty in /usr/src/linux- source-2.6.15/drivers/usb/storage/unusual_devs.h for it? -- Ipods react badly to checks for EFI partition tables https://launchpad.net/bugs/37163 From alietss at yahoo.com Mon Jul 3 11:57:11 2006 From: alietss at yahoo.com (aliet) Date: Mon, 03 Jul 2006 11:57:11 -0000 Subject: [Bug 51151] Re: failed the disk partitioning with a raid and adaptec aic-7802p References: <20060627214736.17054.17710.malonedeb@gangotri.ubuntu.com> Message-ID: <20060703115711.17086.49484.malone@gangotri.ubuntu.com> I read this in Dell home page, maybe is related... kernel.org distributed kernels * LSI engineers maintain the megaraid_mbox driver in kernel 2.6.x. This supports Dell PERC 3 and PERC 4 series cards. Older PERC 2 and earlier cards can be made to work with the megaraid_legacy (name as of 2.6.16, formerly 'megaraid') driver, though their use is unsupported by Dell or LSI. Report issues to the public mailing list linux- scsi at vger.kernel.org. may a backport from 2.6.16 fix this?? http://linux.dell.com/storage.shtml best regards -- failed the disk partitioning with a raid and adaptec aic-7802p https://launchpad.net/bugs/51151 From brian at gurtler.net Mon Jul 3 12:05:53 2006 From: brian at gurtler.net (Brian G) Date: Mon, 03 Jul 2006 12:05:53 -0000 Subject: [Bug 51644] No ALSA sound after upgrade from Breezy to Dapper References: <20060702231450.17054.99618.malonedeb@gangotri.ubuntu.com> Message-ID: <20060703120553.17054.26591.launchpad@canonical@gangotri.ubuntu.com> Public bug reported: I had my ALSA sound working just fine in Breezy.. after installing 6.06 my sound stopped working. I can get OSS to work but ALSA has stopped working. sound card is Turtle Beach Santa Cruz i can no longer use Rhythmbox or Banshee among other applications. i get no start up or shut down sounds i get no sounds for GAIM at all. i've made sure everything via alsamixer is not muted and still have no sound. ** Affects: linux-source-2.6.15 (Ubuntu) Importance: Low Status: Needs Info -- No ALSA sound after upgrade from Breezy to Dapper https://launchpad.net/bugs/51644 From crimsun at fungus.sh.nu Mon Jul 3 12:05:52 2006 From: crimsun at fungus.sh.nu (Daniel T Chen) Date: Mon, 03 Jul 2006 12:05:52 -0000 Subject: [Bug 51644] Re: No ALSA sound after upgrade from Breezy to Dapper References: <20060702231450.17054.99618.malonedeb@gangotri.ubuntu.com> Message-ID: <20060703120552.17054.80599.malone@gangotri.ubuntu.com> Please attach the contents of /etc/asound.conf and ~/.asoundrc* (if any exist) and the output from ``amixer''. ** Changed in: alsa-driver (Ubuntu) Sourcepackagename: alsa-driver => linux-source-2.6.15 Importance: Untriaged => Low Status: Unconfirmed => Needs Info -- No ALSA sound after upgrade from Breezy to Dapper https://launchpad.net/bugs/51644 From cmsj at tenshu.net Mon Jul 3 14:31:49 2006 From: cmsj at tenshu.net (Chris Jones) Date: Mon, 03 Jul 2006 14:31:49 -0000 Subject: [Bug 50593] Re: ati_remote module responding incorrectly References: <20060621175624.29559.25675.malonedeb@gandwana.ubuntu.com> Message-ID: <20060703143149.17054.3130.malone@gangotri.ubuntu.com> This is caused by the change from HZ=1000 to HZ=250 - the driver blindly assumes that HZ is 1000. There is a patch against 2.6.17 at: http://lkml.org/lkml/2006/7/2/89 but it does not cleanly apply to 2.6.15. i will have a look at porting it. ** Bug watch added: Linux Kernel Bug Tracker #4981 http://bugzilla.kernel.org/show_bug.cgi?id=4981 ** Also affects: linux (upstream) via http://bugzilla.kernel.org/show_bug.cgi?id=4981 Importance: Unknown Status: Unknown -- ati_remote module responding incorrectly https://launchpad.net/bugs/50593 From brandonjsnider at hotmail.com Mon Jul 3 15:29:09 2006 From: brandonjsnider at hotmail.com (AdrianVeidt) Date: Mon, 03 Jul 2006 15:29:09 -0000 Subject: [Bug 50593] RE: [Bug 50593] Re: ati_remote module responding incorrectly References: <20060621175624.29559.25675.malonedeb@gandwana.ubuntu.com> <20060703143149.17054.3130.malone@gangotri.ubuntu.com> Message-ID: -- ati_remote module responding incorrectly https://launchpad.net/bugs/50593 From brandonjsnider at hotmail.com Mon Jul 3 16:16:20 2006 From: brandonjsnider at hotmail.com (AdrianVeidt) Date: Mon, 03 Jul 2006 16:16:20 -0000 Subject: [Bug 50593] Re: ati_remote module responding incorrectly References: <20060621175624.29559.25675.malonedeb@gandwana.ubuntu.com> Message-ID: <20060703161620.17054.43936.malone@gangotri.ubuntu.com> This may sound simplistic, but why not just go back to the prevous version of the module, the one that has worked up until now? -- ati_remote module responding incorrectly https://launchpad.net/bugs/50593 From cmsj at tenshu.net Mon Jul 3 16:26:52 2006 From: cmsj at tenshu.net (Chris Jones) Date: Mon, 03 Jul 2006 16:26:52 -0000 Subject: [Bug 50593] Re: ati_remote module responding incorrectly References: <20060621175624.29559.25675.malonedeb@gandwana.ubuntu.com> Message-ID: <20060703162652.17054.1920.malone@gangotri.ubuntu.com> Because, if I'm right, this is not due to a change in the module, but a global change in the kernel (ie dropping the default timer from 1000HZ to 250HZ), so one either puts that change back (which hurts laptop people) or fix the driver to behave correctly instead of having it just happen to work if you get certain settings right. -- ati_remote module responding incorrectly https://launchpad.net/bugs/50593 From brandonjsnider at hotmail.com Mon Jul 3 17:05:47 2006 From: brandonjsnider at hotmail.com (AdrianVeidt) Date: Mon, 03 Jul 2006 17:05:47 -0000 Subject: [Bug 50593] RE: [Bug 50593] Re: ati_remote module responding incorrectly References: <20060621175624.29559.25675.malonedeb@gandwana.ubuntu.com> <20060703162652.17054.1920.malone@gangotri.ubuntu.com> Message-ID: -- ati_remote module responding incorrectly https://launchpad.net/bugs/50593 From adam at one0.net Mon Jul 3 17:44:18 2006 From: adam at one0.net (Adam_S) Date: Mon, 03 Jul 2006 17:44:18 -0000 Subject: [Bug 50588] Re: Slow boot time since update to kernel 2.6.15-25-686 References: <20060621173616.23311.67847.malonedeb@gangotri.ubuntu.com> Message-ID: <20060703174418.17054.51154.malone@gangotri.ubuntu.com> I am also affected on my T60p ... the delay doesn't seem to be getting longer, but it around a minute or so. /proc/mounts: rootfs / rootfs rw 0 0 none /sys sysfs rw 0 0 none /proc proc rw,nodiratime 0 0 udev /dev tmpfs rw 0 0 /dev/sda3 / ext3 rw,data=ordered 0 0 /dev/sda3 /dev/.static/dev ext3 rw,data=ordered 0 0 tmpfs /var/run tmpfs rw 0 0 tmpfs /var/lock tmpfs rw 0 0 usbfs /proc/bus/usb usbfs rw 0 0 tmpfs /lib/modules/2.6.15-25-686/volatile tmpfs rw 0 0 devpts /dev/pts devpts rw 0 0 tmpfs /dev/shm tmpfs rw 0 0 tmpfs /var/run tmpfs rw 0 0 tmpfs /var/lock tmpfs rw 0 0 /dev/sda6 /media/storage vfat rw,nodiratime,gid=46,fmask=0007,dmask=0007,codepage=cp437,iocharset=iso8859-1,utf8 0 0 /dev/sda1 /media/windows ntfs ro,noatime,nodiratime,uid=0,gid=46,umask=07,nls=utf8,errors=continue,mft_zone_multiplier=1 0 0 /etc/fstab: # /etc/fstab: static file system information. # # proc /proc proc defaults 0 0 /dev/sda3 / ext3 defaults,errors=remount-ro 0 1 #/dev/sda2 /media/recover vfat defaults,utf8,umask=007,gid=46 0 1 /dev/sda6 /media/storage vfat defaults,utf8,umask=007,gid=46 0 1/dev/sda1 /media/windows ntfs defaults,nls=utf8,umask=007,gid=46 0 1 /dev/sda5 none swap sw 0 0 /dev/hda /media/cdrom0 udf,iso9660 user,noauto 0 0 -- Slow boot time since update to kernel 2.6.15-25-686 https://launchpad.net/bugs/50588 From brian at gurtler.net Mon Jul 3 18:20:04 2006 From: brian at gurtler.net (Brian G) Date: Mon, 03 Jul 2006 18:20:04 -0000 Subject: [Bug 51644] Re: No ALSA sound after upgrade from Breezy to Dapper References: <20060702231450.17054.99618.malonedeb@gangotri.ubuntu.com> Message-ID: <20060703182004.17086.68859.launchpad@gangotri.ubuntu.com> ** Attachment added: "amixer output" http://librarian.launchpad.net/3216733/amixer_output.txt ** Attachment added: "asound.conf" http://librarian.launchpad.net/3216736/asound.conf -- No ALSA sound after upgrade from Breezy to Dapper https://launchpad.net/bugs/51644 From brian at gurtler.net Mon Jul 3 18:34:24 2006 From: brian at gurtler.net (Brian G) Date: Mon, 03 Jul 2006 18:34:24 -0000 Subject: [Bug 51644] Re: No ALSA sound after upgrade from Breezy to Dapper References: <20060702231450.17054.99618.malonedeb@gangotri.ubuntu.com> Message-ID: <20060703183424.17054.21423.malone@gangotri.ubuntu.com> ~/.asoundrc* does not exist (yes i know how to unhide files ;) ) -- No ALSA sound after upgrade from Breezy to Dapper https://launchpad.net/bugs/51644 From ben.collins at ubuntu.com Mon Jul 3 18:45:00 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Mon, 03 Jul 2006 18:45:00 -0000 Subject: [Bug 51674] Re: acx firmware not added to libs after kernel auto-update References: <20060703092619.17054.34057.malonedeb@gangotri.ubuntu.com> Message-ID: <20060703184500.17086.9324.malone@gangotri.ubuntu.com> Probably because you somehow lost the linux-386 package that ensures that linux-restricted-modules is also upgraded. sudo apt-get install linux-386 And you wont have this problem anymore. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Unconfirmed => Rejected -- acx firmware not added to libs after kernel auto-update https://launchpad.net/bugs/51674 From ben.collins at ubuntu.com Mon Jul 3 18:54:57 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Mon, 03 Jul 2006 18:54:57 -0000 Subject: [Bug 27229] Re: Suspend fails with blinking caps lock and scroll lock References: <20060113145331.21012.27745.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060703185457.17054.33387.launchpad@gangotri.ubuntu.com> ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Needs Info => Fix Released -- Suspend fails with blinking caps lock and scroll lock https://launchpad.net/bugs/27229 From ben.collins at ubuntu.com Mon Jul 3 18:55:34 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Mon, 03 Jul 2006 18:55:34 -0000 Subject: [Bug 29460] Re: Boot Crash with SMP K8 Kernel References: <20060123165300.28395.60982.malonedeb@gangotri.ubuntu.com> Message-ID: <20060703185534.17054.78803.malone@gangotri.ubuntu.com> The CVS version is known to work, and that's what is in dapper. That's why I need it tested on the latest dapper kernel (2.6.15-25). -- Boot Crash with SMP K8 Kernel https://launchpad.net/bugs/29460 From ben.collins at ubuntu.com Mon Jul 3 19:01:33 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Mon, 03 Jul 2006 19:01:33 -0000 Subject: [Bug 38562] Re: ich6 + sata suspend/hibernate problem References: <20060407081917.32313.78119.malonedeb@gandwana.ubuntu.com> Message-ID: <20060703190134.17054.16724.launchpad@gangotri.ubuntu.com> ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Unconfirmed => Fix Released -- ich6 + sata suspend/hibernate problem https://launchpad.net/bugs/38562 From ben.collins at ubuntu.com Mon Jul 3 19:02:16 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Mon, 03 Jul 2006 19:02:16 -0000 Subject: [Bug 38478] Re: rt2500 seems of no use in SMP kernel package References: <20060406193412.32313.93906.malonedeb@gandwana.ubuntu.com> Message-ID: <20060703190216.17054.95179.malone@gangotri.ubuntu.com> Latest dapper kernel contains the rt2500 CVS version, so should work in SMP environments. ** Changed in: linux-meta (Ubuntu) Sourcepackagename: linux-meta => linux-source-2.6.15 Status: Unconfirmed => Fix Released -- rt2500 seems of no use in SMP kernel package https://launchpad.net/bugs/38478 From ben.collins at ubuntu.com Mon Jul 3 19:08:17 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Mon, 03 Jul 2006 19:08:17 -0000 Subject: [Bug 41061] Re: aic7xxx fails to load References: <20060424090127.17643.31977.malonedeb@gandwana.ubuntu.com> Message-ID: <20060703190817.17054.97295.launchpad@gangotri.ubuntu.com> ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Confirmed => Fix Released -- aic7xxx fails to load https://launchpad.net/bugs/41061 From ben.collins at ubuntu.com Mon Jul 3 19:06:38 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Mon, 03 Jul 2006 19:06:38 -0000 Subject: [Bug 39343] Re: ndiswrapper not working for intel 3945G in Dapper flight 6 References: <20060412204053.15436.55221.malonedeb@gangotri.ubuntu.com> Message-ID: <20060703190638.17086.40582.launchpad@gangotri.ubuntu.com> ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Unconfirmed => Fix Released -- ndiswrapper not working for intel 3945G in Dapper flight 6 https://launchpad.net/bugs/39343 From ben.collins at ubuntu.com Mon Jul 3 19:14:43 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Mon, 03 Jul 2006 19:14:43 -0000 Subject: [Bug 49772] Re: kernel lacks support for IP100A chipsets in sundance driver References: <20060614213643.31244.47820.malonedeb@gandwana.ubuntu.com> Message-ID: <20060703191443.17054.74298.launchpad@gangotri.ubuntu.com> ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Unconfirmed => Fix Committed -- kernel lacks support for IP100A chipsets in sundance driver https://launchpad.net/bugs/49772 From dnrpn5802 at sneakemail.com Mon Jul 3 19:04:39 2006 From: dnrpn5802 at sneakemail.com (charles posinoff) Date: Mon, 03 Jul 2006 19:04:39 -0000 Subject: [Bug 30273] Re: [Bug 30273] Re: linux-image-2.6.15-14-powerpc does not boot on "50 (PowerBook Wallstreet)" References: <20060201225707.3906.28595.malonedeb@gangotri.ubuntu.com> <20060703040526.17086.55337.malone@gangotri.ubuntu.com> Message-ID: <24073-76575@sneakemail.com> Niels, thank you for your response. I understand. Two questions: A) Are you aware of the best path to pursue so I have a stable machine that wakes from sleep like earlier kernels used to? i.e. is this 2.6.15-25 or later, or 2.6.17 or later... ? B) Should I follow #50746 for status of resolution to the 2.6.17 kernel usability on BootX/OldWorld? thank you. charles posinoff On Mon, 2006-07-03 at 04:05 +0000, Niels Kristian Bech Jensen nkbj-at-mail.tele.dk |ubugzilla| wrote: > 2.6.15-25 is in the Dapper repository - 2.6.17 is in the Edgy > repository. > > I think the boot problem is a new issue. I've reported it in bug #50746. > The patch was taken from the 2.6.16 tree and should be in 2.6.17 as > well. > -- linux-image-2.6.15-14-powerpc does not boot on "50 (PowerBook Wallstreet)" https://launchpad.net/bugs/30273 From cmsj at tenshu.net Mon Jul 3 19:37:07 2006 From: cmsj at tenshu.net (Chris Jones) Date: Mon, 03 Jul 2006 19:37:07 -0000 Subject: [Bug 50593] Re: ati_remote module responding incorrectly References: <20060621175624.29559.25675.malonedeb@gandwana.ubuntu.com> Message-ID: <20060703193707.17054.20888.malone@gangotri.ubuntu.com> Ok, the patch seems to port pretty easily (but I have to concede that I'm fumbling around things I don't fully understand) and from my initial testing seems to work absolutely fine. I will attach it to this bug shortly. ** Attachment added: "ATi Remote repeat patch" http://librarian.launchpad.net/3216807/ati_remote_repeat.diff -- ati_remote module responding incorrectly https://launchpad.net/bugs/50593 From nkbj at mail.tele.dk Mon Jul 3 19:40:47 2006 From: nkbj at mail.tele.dk (Niels Kristian Bech Jensen) Date: Mon, 03 Jul 2006 19:40:47 -0000 Subject: [Bug 30273] Re: linux-image-2.6.15-14-powerpc does not boot on "50 (PowerBook Wallstreet)" References: <20060201225707.3906.28595.malonedeb@gangotri.ubuntu.com> Message-ID: <20060703194047.17054.74927.malone@gangotri.ubuntu.com> Hi Charles. A) I would go for the 2.6.15 series for now. B) Yes. Regards, Niels Kristian -- linux-image-2.6.15-14-powerpc does not boot on "50 (PowerBook Wallstreet)" https://launchpad.net/bugs/30273 From cmsj at tenshu.net Mon Jul 3 20:26:02 2006 From: cmsj at tenshu.net (Chris Jones) Date: Mon, 03 Jul 2006 20:26:02 -0000 Subject: [Bug 50593] Re: ati_remote module responding incorrectly References: <20060621175624.29559.25675.malonedeb@gandwana.ubuntu.com> Message-ID: <20060703202602.17054.92416.launchpad@gangotri.ubuntu.com> ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Confirmed => In Progress -- ati_remote module responding incorrectly https://launchpad.net/bugs/50593 From reg at integrity.bourg.net Mon Jul 3 20:43:16 2006 From: reg at integrity.bourg.net (Steve Bourg) Date: Mon, 03 Jul 2006 20:43:16 -0000 Subject: [Bug 30557] Re: cpu idle time in /proc/stat wrong References: <20060205141542.11709.55517.malonedeb@gandwana.ubuntu.com> Message-ID: <20060703204316.17054.79481.malone@gangotri.ubuntu.com> I too would like to emphasize the importance of this issue. Performance is significantly degraded on my HP nc6230 with 686 kernel. With such a variety of systems being impacted, I hope this issue will be be changed to a higher level of importance. -- cpu idle time in /proc/stat wrong https://launchpad.net/bugs/30557 From ben.collins at ubuntu.com Mon Jul 3 21:42:09 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Mon, 03 Jul 2006 21:42:09 -0000 Subject: [Bug 50593] Re: ati_remote module responding incorrectly References: <20060621175624.29559.25675.malonedeb@gandwana.ubuntu.com> Message-ID: <20060703214209.17086.93694.malone@gangotri.ubuntu.com> Patch was reversed, but applied. Thanks ** Changed in: linux-source-2.6.15 (Ubuntu) Assignee: Kernel Bugs => Ben Collins Status: In Progress => Fix Committed -- ati_remote module responding incorrectly https://launchpad.net/bugs/50593 From ben.collins at ubuntu.com Mon Jul 3 21:44:17 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Mon, 03 Jul 2006 21:44:17 -0000 Subject: [Bug 50599] Re: Regressions with upgrade from kernel 2.6.15-23 to 2.6.15-25 References: <20060621182547.23311.30190.malonedeb@gangotri.ubuntu.com> Message-ID: <20060703214417.17054.32013.launchpad@gangotri.ubuntu.com> ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Unconfirmed => Rejected -- Regressions with upgrade from kernel 2.6.15-23 to 2.6.15-25 https://launchpad.net/bugs/50599 From jakob3 at comcast.net Mon Jul 3 21:46:30 2006 From: jakob3 at comcast.net (jakobc) Date: Mon, 03 Jul 2006 21:46:30 -0000 Subject: [Bug 50588] Re: Slow boot time since update to kernel 2.6.15-25-686 References: <20060621173616.23311.67847.malonedeb@gangotri.ubuntu.com> Message-ID: <20060703214630.17054.46656.malone@gangotri.ubuntu.com> I see the same bug on my T60p. It hangs for about 2 min. when mounting root file system. rootfs / rootfs rw 0 0 none /sys sysfs rw 0 0 none /proc proc rw,nodiratime 0 0 udev /dev tmpfs rw 0 0 /dev/sda3 / ext3 rw,data=ordered 0 0 /dev/sda3 /dev/.static/dev ext3 rw,data=ordered 0 0 tmpfs /var/run tmpfs rw 0 0 tmpfs /var/lock tmpfs rw 0 0 usbfs /proc/bus/usb usbfs rw 0 0 tmpfs /lib/modules/2.6.15-25-686/volatile tmpfs rw 0 0 devpts /dev/pts devpts rw 0 0 tmpfs /dev/shm tmpfs rw 0 0 tmpfs /var/run tmpfs rw 0 0 tmpfs /var/lock tmpfs rw 0 0 # /etc/fstab: static file system information. # # proc /proc proc defaults 0 0 /dev/sda3 / ext3 defaults,errors=remount-ro 0 1 /dev/sda5 none swap sw 0 0 /dev/hda /media/cdrom0 udf,iso9660 user,noauto 0 0 -- Slow boot time since update to kernel 2.6.15-25-686 https://launchpad.net/bugs/50588 From ben.collins at ubuntu.com Mon Jul 3 21:48:41 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Mon, 03 Jul 2006 21:48:41 -0000 Subject: [Bug 50782] Re: please enable CPUSET in the kernel References: <20060623133817.23311.96096.malonedeb@gangotri.ubuntu.com> Message-ID: <20060703214841.17086.23241.malone@gangotri.ubuntu.com> This fix is marked against 2.6.15, so obviously that means dapper :) -- please enable CPUSET in the kernel https://launchpad.net/bugs/50782 From ben.collins at ubuntu.com Mon Jul 3 21:55:45 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Mon, 03 Jul 2006 21:55:45 -0000 Subject: [Bug 50813] Re: 2.6.15-xx ppc kernel fails to boot on G4 References: <20060623192715.23397.36478.malonedeb@gangotri.ubuntu.com> Message-ID: <20060703215546.17086.91654.malone@gangotri.ubuntu.com> This is odd, because your /proc/cpuinfo is almost identical to mine. It's a G4, gray box. I was and have been running dapper on it for over 6 months (in fact, it was pretty much my development box throughout the dapper release cycle). I also have dapper running on my G4 PowerBook. I can't understand why you are having this kind of trouble. Could you perhaps try booting the liveCD for dapper and see if it works? No need to install, just booting it will suffice. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Unconfirmed => Needs Info -- 2.6.15-xx ppc kernel fails to boot on G4 https://launchpad.net/bugs/50813 From ben.collins at ubuntu.com Mon Jul 3 22:01:45 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Mon, 03 Jul 2006 22:01:45 -0000 Subject: [Bug 50898] Re: [Bug 50898] Re: Can't boot with kernel 2.6.15-25 References: <20060625065126.29559.32737.malonedeb@gandwana.ubuntu.com> <20060703112651.17054.72285.malone@gangotri.ubuntu.com> Message-ID: <1151964105.23756.11.camel@grayson> On Mon, 2006-07-03 at 11:26 +0000, blimpyboy wrote: > Anything? Try letting the system wait for as much as 3 minutes to see if it eventually boots. -- Can't boot with kernel 2.6.15-25 https://launchpad.net/bugs/50898 From xsandu at gmail.com Mon Jul 3 22:02:20 2006 From: xsandu at gmail.com (Alexander Matveev) Date: Mon, 03 Jul 2006 22:02:20 -0000 Subject: [Bug 43961] Re: Power down after shutdown does not work... References: <20060510072310.21520.62027.malonedeb@gandwana.ubuntu.com> Message-ID: <20060703220220.17054.10124.malone@gangotri.ubuntu.com> My Thinkpad T22 with kernel 2.6.15-25-686, acpi=force, does not power- off. Hangs on at "will now halt..." -- Power down after shutdown does not work... https://launchpad.net/bugs/43961 From ben.collins at ubuntu.com Mon Jul 3 22:11:21 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Mon, 03 Jul 2006 22:11:21 -0000 Subject: [Bug 51054] Re: MS IntelliMouse Optical 1.1A USB stops responding References: <20060626201409.23397.59595.malonedeb@gangotri.ubuntu.com> Message-ID: <20060703221121.17086.19493.malone@gangotri.ubuntu.com> Please give the exact version of your kernel (2.6.15-25 is latest). -- MS IntelliMouse Optical 1.1A USB stops responding https://launchpad.net/bugs/51054 From ben.collins at ubuntu.com Mon Jul 3 22:24:13 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Mon, 03 Jul 2006 22:24:13 -0000 Subject: [Bug 51151] Re: failed the disk partitioning with a raid and adaptec aic-7802p References: <20060627214736.17054.17710.malonedeb@gangotri.ubuntu.com> Message-ID: <20060703222413.17086.97962.malone@gangotri.ubuntu.com> Please provide "lspci -vv" and "lspci -vvn" output for this machine. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Unconfirmed => Needs Info -- failed the disk partitioning with a raid and adaptec aic-7802p https://launchpad.net/bugs/51151 From ben.collins at ubuntu.com Mon Jul 3 22:23:09 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Mon, 03 Jul 2006 22:23:09 -0000 Subject: [Bug 51083] Re: does not create most of the harddisk devices References: <20060627070232.15526.12775.malonedeb@gandwana.ubuntu.com> Message-ID: <20060703222309.17054.68155.malone@gangotri.ubuntu.com> The warning is that enable_irq() is being called for an IRQ that was never disabled. Likely a driver bug. I'll look into it. -- does not create most of the harddisk devices https://launchpad.net/bugs/51083 From ben.collins at ubuntu.com Mon Jul 3 22:29:31 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Mon, 03 Jul 2006 22:29:31 -0000 Subject: [Bug 51298] Re: LCS-8531G WiFi-card is not recognized by Ubuntu 5.10 References: <20060629131721.17054.69841.malonedeb@gangotri.ubuntu.com> Message-ID: <20060703222931.17054.86481.malone@gangotri.ubuntu.com> This isn't going to be fixed in breezy. Please update to dapper (6.06) and retest to see if the problem exists there. Thanks ** Changed in: linux-source-2.6.12 (Ubuntu) Status: Unconfirmed => Rejected -- LCS-8531G WiFi-card is not recognized by Ubuntu 5.10 https://launchpad.net/bugs/51298 From ben.collins at ubuntu.com Mon Jul 3 22:27:28 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Mon, 03 Jul 2006 22:27:28 -0000 Subject: [Bug 51157] Re: 6.06 64bit kernel totally broken after install, gcc3.3 fixes References: <20060627232049.17086.52183.malonedeb@gangotri.ubuntu.com> Message-ID: <20060703222733.17054.8748.malone@gangotri.ubuntu.com> So booting the 2.6.15-23 or 2.6.15-25 amd64-generic kernels did not work? Obviosly the -generic kernel did work, since you were able to boot and use the installer. Something about your installed environment seems to be broken. Can you at least get dmesg from the booted (broken) system? ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Unconfirmed => Needs Info -- 6.06 64bit kernel totally broken after install, gcc3.3 fixes https://launchpad.net/bugs/51157 From ben.collins at ubuntu.com Mon Jul 3 22:57:22 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Mon, 03 Jul 2006 22:57:22 -0000 Subject: [Bug 51375] Re: madwifi directory missing from /lib/modules/2.6.15-25-386 References: <20060630061428.17086.62279.malonedeb@gangotri.ubuntu.com> Message-ID: <20060703225722.17054.75639.malone@gangotri.ubuntu.com> You need to install the linux-386 package so that updates work correctly. Mainly, the linux-restricted-modules package(s) need to get installed via the metapackage. ** Changed in: linux-meta (Ubuntu) Status: Unconfirmed => Rejected -- madwifi directory missing from /lib/modules/2.6.15-25-386 https://launchpad.net/bugs/51375 From ben.collins at ubuntu.com Mon Jul 3 23:02:44 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Mon, 03 Jul 2006 23:02:44 -0000 Subject: [Bug 51402] Re: "splash" causes fade-to-white on Toshiba Satellite M40X (ATI Radeon Mobility X600) References: <20060630092701.17054.1628.malonedeb@gangotri.ubuntu.com> Message-ID: <20060703230253.17054.90262.malone@gangotri.ubuntu.com> >From what I can tell, this is a hardware issue when switching to certain resolutions. I've seen this on my amd64 system, and it doesn't happen with one LCD panel, but does with another (I think the one LCD panel doesn't sync very well). Switching to console and back to X (CTRL+Alt+F1, then ALT+F7) seems to cure it. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Unconfirmed => Rejected -- "splash" causes fade-to-white on Toshiba Satellite M40X (ATI Radeon Mobility X600) https://launchpad.net/bugs/51402 From ben.collins at ubuntu.com Mon Jul 3 23:10:40 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Mon, 03 Jul 2006 23:10:40 -0000 Subject: [Bug 6554] Re: fan control does not work at fjs amilo pro v2030 References: <20060108190635.15096.7426.malonedeb@gangotri.ubuntu.com> Message-ID: <20060703231040.17054.70041.malone@gangotri.ubuntu.com> So this sounds like a BIOS bug. Maybe they'll fix it in a BIOS update. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Unconfirmed => Rejected -- fan control does not work at fjs amilo pro v2030 https://launchpad.net/bugs/6554 From pajones at puc.edu Tue Jul 4 00:35:57 2006 From: pajones at puc.edu (Paul Jones) Date: Tue, 04 Jul 2006 00:35:57 -0000 Subject: [Bug 29909] Re: Kernel Panic on boot References: <20060128082624.26234.26522.malonedeb@gangotri.ubuntu.com> Message-ID: <20060704003557.17054.16843.malone@gangotri.ubuntu.com> Dapper fixes this bug ** Changed in: linux-source-2.6.12 (Ubuntu) Status: Unconfirmed => Fix Released -- Kernel Panic on boot https://launchpad.net/bugs/29909 From crimsun at fungus.sh.nu Tue Jul 4 01:14:55 2006 From: crimsun at fungus.sh.nu (Daniel T Chen) Date: Tue, 04 Jul 2006 01:14:55 -0000 Subject: [Bug 34831] Re: Hardlock of entire system (Dapper Flight 5) References: <20060314003317.30057.9117.malonedeb@gandwana.ubuntu.com> Message-ID: <20060704011455.17054.24208.launchpad@gangotri.ubuntu.com> ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Confirmed => In Progress -- Hardlock of entire system (Dapper Flight 5) https://launchpad.net/bugs/34831 From hoser at ozemail.com.au Tue Jul 4 01:42:25 2006 From: hoser at ozemail.com.au (blimpyboy) Date: Tue, 04 Jul 2006 01:42:25 -0000 Subject: [Bug 50898] Re: Can't boot with kernel 2.6.15-25 References: <20060625065126.29559.32737.malonedeb@gandwana.ubuntu.com> Message-ID: <20060704014225.17054.96352.malone@gangotri.ubuntu.com> Thanks for the advice. I can confirm that it does indeed boot completely after waiting at least 3 minutes and not more than 5 minutes. If there's anything else I can do to assist, please let me know. Thanks kindly. -- Can't boot with kernel 2.6.15-25 https://launchpad.net/bugs/50898 From alietss at yahoo.com Tue Jul 4 02:03:55 2006 From: alietss at yahoo.com (aliet) Date: Tue, 04 Jul 2006 02:03:55 -0000 Subject: [Bug 51151] Re: failed the disk partitioning with a raid and adaptec aic-7802p References: <20060627214736.17054.17710.malonedeb@gangotri.ubuntu.com> Message-ID: <20060704020356.17054.12413.malone@gangotri.ubuntu.com> on a running debian sarge: lempel:~# uname -a Linux lempel 2.6.8-3-686-smp #1 SMP Thu May 25 00:54:20 UTC 2006 i686 GNU/Linux lempel:~# lspci -vv 0000:00:00.0 Host bridge: ServerWorks CNB20LE Host Bridge (rev 05) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- Reset- FastB2B- Capabilities: [68] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 0000:00:02.1 I2O: Intel Corp. 80960RP [i960RP Microprocessor] (rev 01) (prog-if 01) Subsystem: American Megatrends Inc. MegaRAID 467 Enterprise 1500 RAID Controller Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- Reset- FastB2B- Capabilities: [68] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 0000:00:02.1 0e00: 8086:1960 (rev 01) (prog-if 01) Subsystem: 101e:0467 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- Message-ID: <20060704030723.17054.60305.malone@gangotri.ubuntu.com> I think it's a radeon-specific bug. The atyfb (iirc, not near my laptop atm) driver doesn't work with a lot of radeon cards. My old Dell Inspiron 8000 did the same thing with that driver, too. The reason I logged it against this was my suspicion that the Ubuntu- specific(?) "splash" extension was making a card-specific choice to try to use a better framebuffer driver than "vesafb". Failing in this manner would be fine, but it does exactly the same thing with the "Safe VGA" menu option from the Live/InstallCD. That menu option should *definitely* not use card-specific framebuffer drivers for the splash; either VGA or VesaFB are the safest. Perhaps allow "splash=vesa" and "splash=vga", and add those options to the LiveCD installation menu? -- "splash" causes fade-to-white on Toshiba Satellite M40X (ATI Radeon Mobility X600) https://launchpad.net/bugs/51402 From sam at vilain.net Tue Jul 4 03:07:41 2006 From: sam at vilain.net (Sam Vilain) Date: Tue, 04 Jul 2006 03:07:41 -0000 Subject: [Bug 51402] Re: "splash" causes fade-to-white on Toshiba Satellite M40X (ATI Radeon Mobility X600) References: <20060630092701.17054.1628.malonedeb@gangotri.ubuntu.com> Message-ID: <20060704030741.17054.47038.malone@gangotri.ubuntu.com> ps I am not sure on what grounds you rejected this bug -- "splash" causes fade-to-white on Toshiba Satellite M40X (ATI Radeon Mobility X600) https://launchpad.net/bugs/51402 From crimsun at fungus.sh.nu Tue Jul 4 03:19:59 2006 From: crimsun at fungus.sh.nu (Daniel T Chen) Date: Tue, 04 Jul 2006 03:19:59 -0000 Subject: [Bug 51644] Re: No ALSA sound after upgrade from Breezy to Dapper References: <20060702231450.17054.99618.malonedeb@gangotri.ubuntu.com> Message-ID: <20060704032000.17054.60027.malone@gangotri.ubuntu.com> Your /etc/asound.conf is obsolete, since cs46xx supports multiplayback (pcm multiplexing) by default. You can move it out of the way for testing purposes. Please mute all IEC958* elements using alsamixer, then play an audio file using ALSA output. -- No ALSA sound after upgrade from Breezy to Dapper https://launchpad.net/bugs/51644 From lvizard at inszy.org Tue Jul 4 03:49:32 2006 From: lvizard at inszy.org (lvizard) Date: Tue, 04 Jul 2006 03:49:32 -0000 Subject: [Bug 32752] Re: Dell PERC 2/SC (AMI Megaraid 466(?)) not working References: <20060224172951.27067.39784.malonedeb@gangotri.ubuntu.com> Message-ID: <20060704034932.17054.58178.malone@gangotri.ubuntu.com> http://lkml.org/lkml/2006/2/9/228 This is a 2.6.16 patch for the megaraid driver. I hope it solves the problem. -- Dell PERC 2/SC (AMI Megaraid 466(?)) not working https://launchpad.net/bugs/32752 From gianfranco.liporace at asl12.piemonte.it Tue Jul 4 07:44:43 2006 From: gianfranco.liporace at asl12.piemonte.it (Gianfranco Liporace) Date: Tue, 04 Jul 2006 07:44:43 -0000 Subject: [Bug 34063] Re: Unable to start g-v-m References: <20060308102459.14318.35540.malonedeb@gangotri.ubuntu.com> Message-ID: <20060704074443.16565.35192.launchpad@gandwana.ubuntu.com> ** Bug 49666 has been marked a duplicate of this bug -- Unable to start g-v-m https://launchpad.net/bugs/34063 From gianfranco.liporace at asl12.piemonte.it Tue Jul 4 07:46:41 2006 From: gianfranco.liporace at asl12.piemonte.it (Gianfranco Liporace) Date: Tue, 04 Jul 2006 07:46:41 -0000 Subject: [Bug 49666] Re: g-v-m stopped running after upgrade to Dapper References: <20060614064648.25765.13233.malonedeb@gangotri.ubuntu.com> Message-ID: <20060704074641.23781.78245.malone@gangotri.ubuntu.com> *** This bug is a duplicate of bug 34063 *** This bug has already reported in launchpad bug #34063 ** This bug has been marked a duplicate of bug 34063 Unable to start g-v-m -- g-v-m stopped running after upgrade to Dapper https://launchpad.net/bugs/49666 From johannes80 at polyester.se Tue Jul 4 08:32:33 2006 From: johannes80 at polyester.se (knubbe) Date: Tue, 04 Jul 2006 08:32:33 -0000 Subject: [Bug 30570] Re: CPU usage very high with no running tasks using it References: <20060205163505.29619.50181.malonedeb@gangotri.ubuntu.com> Message-ID: <20060704083233.23723.32925.malone@gangotri.ubuntu.com> *** This bug is a duplicate of bug 30557 *** I also get this bug on my system; Dell Inspiron 6000 (laptop), Intel celeron M CPU, i915 graphics. As stated in bug #30557 setting max_cstate to 2 would fix this, but it didn't work on my system. However, setting max_cstate to 1 (mentioned above), fixes it. (ie: adding "echo 1 > /sys/module/processor/parameters/max_cstate" in /etc/rc.local). -- CPU usage very high with no running tasks using it https://launchpad.net/bugs/30570 From ianfh at acenet.net.au Tue Jul 4 08:39:27 2006 From: ianfh at acenet.net.au (Jacksonz123z) Date: Tue, 04 Jul 2006 08:39:27 -0000 Subject: [Bug 34902] Re: Ralink Wireless USB/PCMCIA/PCI hangs PC References: <20060314143545.30082.52680.malonedeb@gandwana.ubuntu.com> Message-ID: <20060704083927.16609.26005.malone@gandwana.ubuntu.com> Yes the presence of my Netgear WG511 wireless card will usually freeze my laptop at boot. Removing the card fixes the problem. Worked very well in Breezy. Ndiswrapper is used to load driver. -- Ralink Wireless USB/PCMCIA/PCI hangs PC https://launchpad.net/bugs/34902 From palaticky.rudolf at zoznam.sk Tue Jul 4 09:27:34 2006 From: palaticky.rudolf at zoznam.sk (decried) Date: Tue, 04 Jul 2006 09:27:34 -0000 Subject: [Bug 51054] Re: MS IntelliMouse Optical 1.1A USB stops responding References: <20060626201409.23397.59595.malonedeb@gangotri.ubuntu.com> Message-ID: <20060704092734.23781.3498.malone@gangotri.ubuntu.com> admin at dapper:~$ uname -r 2.6.15-25-686 -- MS IntelliMouse Optical 1.1A USB stops responding https://launchpad.net/bugs/51054 From brian at gurtler.net Tue Jul 4 09:31:11 2006 From: brian at gurtler.net (Brian G) Date: Tue, 04 Jul 2006 09:31:11 -0000 Subject: [Bug 51644] Re: No ALSA sound after upgrade from Breezy to Dapper References: <20060702231450.17054.99618.malonedeb@gangotri.ubuntu.com> Message-ID: <20060704093111.23723.24209.malone@gangotri.ubuntu.com> not sure if muting all IEC958* elements, or removing the /etc/.asound.conf fixed this. but one of the two or a combination of both did. thank you. -- No ALSA sound after upgrade from Breezy to Dapper https://launchpad.net/bugs/51644 From frogzoo at chilli.net.au Tue Jul 4 11:58:13 2006 From: frogzoo at chilli.net.au (frogzoo) Date: Tue, 04 Jul 2006 11:58:13 -0000 Subject: [Bug 6627] Re: lexmark z53 blank pages References: <20060110202826.5372.9972.malonedeb@gangotri.ubuntu.com> Message-ID: <20060704115813.16565.37332.malone@gandwana.ubuntu.com> Make and Model: Lexmark Z52 - CUPS+Gutenprint v5.0.0-rc2 Using only black ink cartridge. Updated from the test repo "deb http://www.grad.hr/~ivoks/ubuntu/gutenprint ./" Definitely an improvement - there is now ink on the paper, but the print quality is terrible. At 600dpi, it's print appears in stripes - about a cm across, then a 1/2 cm is blank, repeated down the page. 1200dpi is very faint, and 2400dpi is non existent. The only thing that's printed half way reasonably was the ubuntu test page at 600dpi. -- lexmark z53 blank pages https://launchpad.net/bugs/6627 From jzgoda at o2.pl Tue Jul 4 12:02:03 2006 From: jzgoda at o2.pl (Jarek Zgoda) Date: Tue, 04 Jul 2006 12:02:03 -0000 Subject: [Bug 30557] Re: cpu idle time in /proc/stat wrong References: <20060205141542.11709.55517.malonedeb@gandwana.ubuntu.com> Message-ID: <20060704120203.23781.33993.malone@gangotri.ubuntu.com> This problem occurs also on Celeron-M processors (like mine 360J in HP nx6110). Performance in Dapper is severely degraded when compared to Breezy. -- cpu idle time in /proc/stat wrong https://launchpad.net/bugs/30557 From tedsmith28 at hotmail.com Tue Jul 4 14:34:25 2006 From: tedsmith28 at hotmail.com (GIZMO) Date: Tue, 04 Jul 2006 14:34:25 -0000 Subject: [Bug 6367] Re: udev enumeration should use /sys/bus not /sys/devices References: <20060102180911.29335.17628.malonedeb@gangotri.ubuntu.com> Message-ID: <20060704143425.16565.50437.malone@gandwana.ubuntu.com> I have written a HOW TO for people suffering from this problem while the bug is ammended. It's titled "Fix 'ALERT! : dev/XYZ does not exist' after upgrade to Dapper Drake". I hope it may be able to help the developers with fixing it, perhaps? http://www.ubuntuforums.org/showthread.php?t=197956 Thanks Ted -- udev enumeration should use /sys/bus not /sys/devices https://launchpad.net/bugs/6367 From paolog.71 at libero.it Tue Jul 4 14:41:30 2006 From: paolog.71 at libero.it (Paolo Grifa) Date: Tue, 04 Jul 2006 14:41:30 -0000 Subject: [Bug 51847] p4-clockmod and "N60 errata" patch References: <20060704144130.23781.62390.malonedeb@gangotri.ubuntu.com> Message-ID: <20060704144130.23781.62390.malonedeb@gangotri.ubuntu.com> Public bug reported: Binary package hint: linux-image-2.6-386 Clock modulation in Pentium IV no longer scale under 2 Ghz. This patch was introduced in Breezy for a bug in Pentium IV (N60 errata) that made pc to hang when arriving at the slowest possible frequency. The problem is that this patch doesn't allow to go under 2 Ghz, that is a frequency far too high for every computer. Infact in the file p4-clockmod.c you can find at line 250: if (has_N60_errata[policy->cpu] && p4clockmod_table[i].frequency < 2000000) This problem can be considered as a bug since it is really not necessary not to go under 2 Ghz and on laptops it means that it consumes a lot more energy and cpu gets much hotter while fan is always on. It would be much more efficient a value like 700000 (0,7 Ghz) or even less, since there aren't any cpu which lowest frequency is under 0,4 Ghz). The line should be: if (has_N60_errata[policy->cpu] && p4clockmod_table[i].frequency < 700000) ** Affects: linux-meta (Ubuntu) Importance: Untriaged Status: Unconfirmed -- p4-clockmod and "N60 errata" patch https://launchpad.net/bugs/51847 From paolog.71 at libero.it Tue Jul 4 14:45:06 2006 From: paolog.71 at libero.it (Paolo Grifa) Date: Tue, 04 Jul 2006 14:45:06 -0000 Subject: [Bug 51847] Re: p4-clockmod and "N60 errata" patch References: <20060704144130.23781.62390.malonedeb@gangotri.ubuntu.com> Message-ID: <20060704144506.23723.31375.malone@gangotri.ubuntu.com> Sorry... "since there aren't any cpu which lowest frequency is under 0,4 Ghz)" should read: "since there aren't any cpu which lowest frequency is higher than 0,4 Ghz" -- p4-clockmod and "N60 errata" patch https://launchpad.net/bugs/51847 From emendelson at compuserve.com Tue Jul 4 15:17:43 2006 From: emendelson at compuserve.com (Edward Mendelson) Date: Tue, 04 Jul 2006 15:17:43 -0000 Subject: [Bug 6367] Re: [Bug 6367] Re: udev enumeration should use /sys/bus not /sys/devices References: <20060102180911.29335.17628.malonedeb@gangotri.ubuntu.com> <20060704143425.16565.50437.malone@gandwana.ubuntu.com> Message-ID: The devs already know exactly how to fix it - the title of the bug report is the answer. In fact they knew how to fix it before Dapper was released. They simply didn't think it was worth fixing in Dapper - which was the worst mistake the Ubuntu devs ever made. It's not a mystery that needs to be solved - it's a fix that they knew but didn't want to put in at the last moment because they were afraid the fix might break other things. (It turns out that the fix doesn't break anything else, but that was their decision.) The least bad workaround is to use UUIDs for the boot identifier in grub, as explained on that bug report. But that's not really good enough for all situations. The only real fix is not to install Dapper and instead wait for Edgy, which reportedly had the fix built-in from day 1. I'm not bothering with Dapper because, to me, it's definitely not worth the hassle. Best, Edward On 4 Jul 2006, at 10:34 AM, GIZMO wrote: > I have written a HOW TO for people suffering from this problem > while the > bug is ammended. It's titled "Fix 'ALERT! : dev/XYZ does not exist' > after upgrade to Dapper Drake". I hope it may be able to help the > developers with fixing it, perhaps? > > http://www.ubuntuforums.org/showthread.php?t=197956 > > Thanks > > Ted > > -- > udev enumeration should use /sys/bus not /sys/devices > https://launchpad.net/bugs/6367 -- udev enumeration should use /sys/bus not /sys/devices https://launchpad.net/bugs/6367 From stephan.schiffel at gmx.de Tue Jul 4 15:30:48 2006 From: stephan.schiffel at gmx.de (Stephan Schiffel) Date: Tue, 04 Jul 2006 15:30:48 -0000 Subject: [Bug 50313] Re: mounting root filesystem stuck References: <20060619100018.13137.57015.malonedeb@gandwana.ubuntu.com> Message-ID: <20060704153048.23781.76396.malone@gangotri.ubuntu.com> I have the same problem here, also with a Thinkpad X60s. This looks like an old bug was reintroduced into the kernel. I've seen the same behaviour some time ago, it was related to the sata controller timing out, when trying to detect disks. See point 2 in http://lkml.org/lkml/2006/1/12/461, I don't when this was fixed but some kernel update did it. -- mounting root filesystem stuck https://launchpad.net/bugs/50313 From ben.collins at ubuntu.com Tue Jul 4 15:30:13 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Tue, 04 Jul 2006 15:30:13 -0000 Subject: [Bug 22593] Re: Remote mouse control with ATI Remote Wonder break References: <20060113141911.21012.77006.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060704153013.16609.68742.malone@gandwana.ubuntu.com> Thanks for testing. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Confirmed => Rejected -- Remote mouse control with ATI Remote Wonder break https://launchpad.net/bugs/22593 From mdz at ubuntu.com Tue Jul 4 15:47:00 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Tue, 04 Jul 2006 15:47:00 -0000 Subject: [Bug 6367] Re: [Bug 6367] Re: [Bug 6367] Re: udev enumeration should use /sys/bus not /sys/devices References: <20060102180911.29335.17628.malonedeb@gangotri.ubuntu.com> <20060704143425.16565.50437.malone@gandwana.ubuntu.com> Message-ID: <20060704154700.GC7407@alcor.net> On Tue, Jul 04, 2006 at 03:17:43PM -0000, Edward Mendelson wrote: > The devs already know exactly how to fix it - the title of the bug > report is the answer. In fact they knew how to fix it before Dapper > was released. They simply didn't think it was worth fixing in Dapper That is not true; the bug report already explains the reasons why this change wasn't made for Dapper. Please take further discussion to ubuntu-devel; this is not the place for it. -- - mdz -- udev enumeration should use /sys/bus not /sys/devices https://launchpad.net/bugs/6367 From aj at dungeon.inka.de Tue Jul 4 16:02:16 2006 From: aj at dungeon.inka.de (Andreas Jellinghaus) Date: Tue, 04 Jul 2006 16:02:16 -0000 Subject: [Bug 51856] linux image 2.6.15-25: usb device not accepting address References: <20060704160216.16609.47955.malonedeb@gandwana.ubuntu.com> Message-ID: <20060704160216.16609.47955.malonedeb@gandwana.ubuntu.com> Public bug reported: [17179721.768000] usb 1-4: new high speed USB device using ehci_hcd and address 10 [17179721.880000] usb 1-4: device descriptor read/64, error -71 [17179722.096000] usb 1-4: device descriptor read/64, error -71 thinkpad T40p with ubuntu 2.6.15-25 kernel, I get this for all usb2 devices (e.g. switch, dvd writer, logitech quickcam etc.). this could be kernel bug 6078 which was fixed in 2.6.16. prior to installind ubuntu dapper I ran debian sarge with kernels compiled on my own, and I did have the same problem with earlier kernels, but not with 2.6.16.*. http://bugzilla.kernel.org/show_bug.cgi?id=6078 ** Affects: linux-meta (Ubuntu) Importance: Untriaged Status: Unconfirmed -- linux image 2.6.15-25: usb device not accepting address https://launchpad.net/bugs/51856 From emendelson at compuserve.com Tue Jul 4 16:32:08 2006 From: emendelson at compuserve.com (Edward Mendelson) Date: Tue, 04 Jul 2006 16:32:08 -0000 Subject: [Bug 6367] Re: [Bug 6367] Re: [Bug 6367] Re: [Bug 6367] Re: udev enumeration shoulduse /sys/bus not /sys/devices References: <20060102180911.29335.17628.malonedeb@gangotri.ubuntu.com> <20060704143425.16565.50437.malone@gandwana.ubuntu.com> <20060704154700.GC7407@alcor.net> Message-ID: <000801c69f87$653f33c0$040ba8c0@Edward> From: "Matt Zimmerman" To: Sent: Tuesday, July 04, 2006 11:47 AM Subject: [Bug 6367] Re: [Bug 6367] Re: [Bug 6367] Re: udev enumeration shoulduse /sys/bus not /sys/devices On Tue, Jul 04, 2006 at 03:17:43PM -0000, Edward Mendelson wrote: >> The devs already know exactly how to fix it - the title of the bug >>report is the answer. In fact they knew how to fix it before Dapper >> was released. They simply didn't think it was worth fixing in Dapper >That is not true; the bug report already explains the reasons why this >change wasn't made for Dapper. >Please take further discussion to ubuntu-devel; this is not the place for >it. Apologies. My memory misled me, and you are absolutely correct. -- udev enumeration should use /sys/bus not /sys/devices https://launchpad.net/bugs/6367 From ben.collins at ubuntu.com Tue Jul 4 17:13:56 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Tue, 04 Jul 2006 17:13:56 -0000 Subject: [Bug 32752] Re: [Bug 32752] Re: Dell PERC 2/SC (AMI Megaraid 466(?)) not working References: <20060224172951.27067.39784.malonedeb@gangotri.ubuntu.com> <20060704034932.17054.58178.malone@gangotri.ubuntu.com> Message-ID: <1152033237.11731.2.camel@grayson> On Tue, 2006-07-04 at 03:49 +0000, lvizard wrote: > http://lkml.org/lkml/2006/2/9/228 > This is a 2.6.16 patch for the megaraid driver. > I hope it solves the problem. No, we already have the naming change in our code. I believe the problem is just one of PCI ID's in the module device table. I'm inspecting the breezy/dapper/edgy tree to see what the correct device table should look like. -- Dell PERC 2/SC (AMI Megaraid 466(?)) not working https://launchpad.net/bugs/32752 From ben.collins at ubuntu.com Tue Jul 4 17:34:14 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Tue, 04 Jul 2006 17:34:14 -0000 Subject: [Bug 51402] Re: [Bug 51402] Re: "splash" causes fade-to-white on Toshiba Satellite M40X (ATI Radeon Mobility X600) References: <20060630092701.17054.1628.malonedeb@gangotri.ubuntu.com> <20060704030723.17054.60305.malone@gangotri.ubuntu.com> Message-ID: <1152034454.11731.9.camel@grayson> On Tue, 2006-07-04 at 03:07 +0000, Sam Vilain wrote: > I think it's a radeon-specific bug. The atyfb (iirc, not near my laptop > atm) driver doesn't work with a lot of radeon cards. My old Dell > Inspiron 8000 did the same thing with that driver, too. > > The reason I logged it against this was my suspicion that the Ubuntu- > specific(?) "splash" extension was making a card-specific choice to try > to use a better framebuffer driver than "vesafb". > > Failing in this manner would be fine, but it does exactly the same thing > with the "Safe VGA" menu option from the Live/InstallCD. That menu > option should *definitely* not use card-specific framebuffer drivers for > the splash; either VGA or VesaFB are the safest. > > Perhaps allow "splash=vesa" and "splash=vga", and add those options to > the LiveCD installation menu? Nah, on mine it's nvidia, and it happens whether I use the nvidia proprietary stuff, or the nv kernel/xorg stuff. I also had it happen with an ATI card under MacOSX on the same monitor. It only happens on this LCD panel that I have (none of the others), and it's not particular to the video card, or the OS that I'm running. Just the monitor sucks :) -- "splash" causes fade-to-white on Toshiba Satellite M40X (ATI Radeon Mobility X600) https://launchpad.net/bugs/51402 From ben.collins at ubuntu.com Tue Jul 4 17:37:03 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Tue, 04 Jul 2006 17:37:03 -0000 Subject: [Bug 51644] Re: No ALSA sound after upgrade from Breezy to Dapper References: <20060702231450.17054.99618.malonedeb@gangotri.ubuntu.com> Message-ID: <20060704173703.23781.286.malone@gangotri.ubuntu.com> Thanks for testing. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Needs Info => Rejected -- No ALSA sound after upgrade from Breezy to Dapper https://launchpad.net/bugs/51644 From cameron.matheson at gmail.com Tue Jul 4 17:59:38 2006 From: cameron.matheson at gmail.com (Cameron Matheson) Date: Tue, 04 Jul 2006 17:59:38 -0000 Subject: [Bug 51869] badram References: <20060704175938.16609.65491.malonedeb@gandwana.ubuntu.com> Message-ID: <20060704175938.16609.65491.malonedeb@gandwana.ubuntu.com> Public bug reported: this is more of a feature request than a bug (i hope this is the right place for this kind of thing). shouldn't we patch all the ubuntu kernels w/ the badram patch? (http://rick.vanrein.org/linux/badram/). It's a pain building my own kernel/modules every time just so that i can use my slightly damaged ram. it seems like this would also mesh well w/ ubuntu's goal of reaching out to the poorer countries in the world. ** Affects: linux-source-2.6.15 (Ubuntu) Importance: Untriaged Status: Unconfirmed -- badram https://launchpad.net/bugs/51869 From H.A.J.Koster at xs4all.nl Tue Jul 4 19:27:55 2006 From: H.A.J.Koster at xs4all.nl (Henk Koster) Date: Tue, 04 Jul 2006 19:27:55 -0000 Subject: [Bug 27888] Re: [DAPPER] ndiswrapper not working with kernel 2.6.15 (AMD64) References: <20060113151945.29386.46469.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060704192755.16565.14473.malone@gandwana.ubuntu.com> I get similar result when inserting RealTek 8187 based USB dongle. Installing the 64-bit Windows driver for this chipset in ndiswrapper appears to work OK, and so does installing ndiswrapper with modprobe. After inserting the dongle, just checking with "sudo ndiswrapper -l" gives no response, have to stop it with Ctl-C. Using dmesg shows similar output as with OP. What's more: when trying to reboot the computer it would hang 2/3 through the shut-down process -- requiring hitting the on/off switch to proceed. -- [DAPPER] ndiswrapper not working with kernel 2.6.15 (AMD64) https://launchpad.net/bugs/27888 From sam at vilain.net Tue Jul 4 21:48:11 2006 From: sam at vilain.net (Sam Vilain) Date: Tue, 04 Jul 2006 21:48:11 -0000 Subject: [Bug 51402] Re: "splash" causes fade-to-white on Toshiba Satellite M40X (ATI Radeon Mobility X600) References: <20060630092701.17054.1628.malonedeb@gangotri.ubuntu.com> Message-ID: <20060704214811.23723.50067.malone@gangotri.ubuntu.com> > Just the monitor sucks :) Ok, well cause aside, perhaps this is easy to work around for when the user explicitly asks for "Safe VGA"? -- "splash" causes fade-to-white on Toshiba Satellite M40X (ATI Radeon Mobility X600) https://launchpad.net/bugs/51402 From ben.collins at ubuntu.com Tue Jul 4 22:21:18 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Tue, 04 Jul 2006 22:21:18 -0000 Subject: [Bug 51402] Re: [Bug 51402] Re: "splash" causes fade-to-white on Toshiba Satellite M40X (ATI Radeon Mobility X600) References: <20060630092701.17054.1628.malonedeb@gangotri.ubuntu.com> <20060704214811.23723.50067.malone@gangotri.ubuntu.com> Message-ID: <1152051678.11731.25.camel@grayson> On Tue, 2006-07-04 at 21:48 +0000, Sam Vilain wrote: > > Just the monitor sucks :) > > Ok, well cause aside, perhaps this is easy to work around for when the > user explicitly asks for "Safe VGA"? That would be something in the usplash package. -- Ubuntu - http://www.ubuntu.com/ Debian - http://www.debian.org/ Linux 1394 - http://www.linux1394.org/ SwissDisk - http://www.swissdisk.com/ -- "splash" causes fade-to-white on Toshiba Satellite M40X (ATI Radeon Mobility X600) https://launchpad.net/bugs/51402 From ben.collins at ubuntu.com Tue Jul 4 22:36:05 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Tue, 04 Jul 2006 22:36:05 -0000 Subject: [Bug 42583] Re: Mounted CIFS filesystem does not work after suspend to disk References: <20060502141303.30606.2934.malonedeb@gangotri.ubuntu.com> Message-ID: <20060704223605.16609.28958.launchpad@gandwana.ubuntu.com> ** Changed in: linux-source-2.6.15 (Ubuntu) Assignee: (unassigned) => ChuckShort Status: Unconfirmed => Fix Committed -- Mounted CIFS filesystem does not work after suspend to disk https://launchpad.net/bugs/42583 From sam at vilain.net Tue Jul 4 23:15:04 2006 From: sam at vilain.net (Sam Vilain) Date: Tue, 04 Jul 2006 23:15:04 -0000 Subject: [Bug 51402] Re: [Bug 51402] Re: [Bug 51402] Re: "splash" causes fade-to-white on Toshiba Satellite M40X (ATI Radeon Mobility X600) References: <20060630092701.17054.1628.malonedeb@gangotri.ubuntu.com> <20060704214811.23723.50067.malone@gangotri.ubuntu.com> <1152051678.11731.25.camel@grayson> Message-ID: <44AAF678.9000702@vilain.net> Ben Collins wrote: > That would be something in the usplash package. Can we transfer this bug or should I log separately? Sam. -- "splash" causes fade-to-white on Toshiba Satellite M40X (ATI Radeon Mobility X600) https://launchpad.net/bugs/51402 From spam.assassin at tiscali.it Tue Jul 4 23:43:11 2006 From: spam.assassin at tiscali.it (ubu) Date: Tue, 04 Jul 2006 23:43:11 -0000 Subject: [Bug 31035] Re: Fails to recognise drives on DAC 960 Raid controller References: <20060210101324.25275.91459.malonedeb@gangotri.ubuntu.com> Message-ID: <20060704234311.16609.97298.malone@gandwana.ubuntu.com> The solution is: http://www.ubuntuforums.org/showthread.php?t=82466 -- Fails to recognise drives on DAC 960 Raid controller https://launchpad.net/bugs/31035 From c.charlot at freesurf.fr Wed Jul 5 01:26:29 2006 From: c.charlot at freesurf.fr (Christophe Charlot) Date: Wed, 05 Jul 2006 01:26:29 -0000 Subject: [Bug 45928] Re: High error rate on UMTS modem References: <20060521215943.23797.25678.malonedeb@gandwana.ubuntu.com> Message-ID: <20060705012629.16609.54932.malone@gandwana.ubuntu.com> I tried... but with no luck :-( Maybe the 2.6.17 kernel will help on this one ? -- High error rate on UMTS modem https://launchpad.net/bugs/45928 From phibxr at gmail.com Wed Jul 5 01:59:22 2006 From: phibxr at gmail.com (phibxr) Date: Wed, 05 Jul 2006 01:59:22 -0000 Subject: [Bug 34508] Re: [Bug 34508] Re: [Bug 34508] Re: 2.6.15 kernel fails to boot on ppc machine References: <20060311210305.30082.75520.malonedeb@gandwana.ubuntu.com> <20060622235849.29464.17580.malone@gandwana.ubuntu.com> <44A8CACD.9050206@laposte.net> Message-ID: Just back from upgrading from a fresh Breezy installation, I'll confirm that Dapper finally w o r k s on my iMac/iLamp G4 700mhz with the latest 2.6.15-25 kernel update. No bootsplash though, but that I can live with. -- 2.6.15 kernel fails to boot on ppc machine https://launchpad.net/bugs/34508 From crimsun at fungus.sh.nu Wed Jul 5 04:06:32 2006 From: crimsun at fungus.sh.nu (Daniel T Chen) Date: Wed, 05 Jul 2006 04:06:32 -0000 Subject: [Bug 34831] Re: Hardlock of entire system (Dapper Flight 5) References: <20060314003317.30057.9117.malonedeb@gandwana.ubuntu.com> Message-ID: <20060705040632.16609.75942.malone@gandwana.ubuntu.com> https://lists.ubuntu.com/archives/kernel-team/2006-July/000943.html ** Changed in: linux-source-2.6.15 (Ubuntu) Status: In Progress => Fix Committed -- Hardlock of entire system (Dapper Flight 5) https://launchpad.net/bugs/34831 From mascdman at hotmail.com Wed Jul 5 05:10:03 2006 From: mascdman at hotmail.com (mascdman) Date: Wed, 05 Jul 2006 05:10:03 -0000 Subject: [Bug 48395] Re: ipw3945 produces 99% cpu, making my laptop unusable References: <20060604183717.4978.25428.malonedeb@gandwana.ubuntu.com> Message-ID: <20060705051003.23723.83090.malone@gangotri.ubuntu.com> I'm running Dapper with kernel version 2.6.5-23-686 on an HP Pavillion dv8000 and an Intel pro/wireless 3945abg. I'm getting the same problem, except it's only running one of my cores at 100% (also a core duo). The problem doesn't seem to happen unless I use the hardware toggle switch to disable the wireless card and leave the computer sitting for a couple hours. Any help would be welcome. -- ipw3945 produces 99% cpu, making my laptop unusable https://launchpad.net/bugs/48395 From bugwatch at bugs.launchpad.net Wed Jul 5 06:54:02 2006 From: bugwatch at bugs.launchpad.net (Bug Watch Updater) Date: Wed, 05 Jul 2006 06:54:02 -0000 Subject: [Bug 50593] Re: ati_remote module responding incorrectly References: <20060621175624.29559.25675.malonedeb@gandwana.ubuntu.com> Message-ID: <20060705065405.6125.25038.launchpad@gangotri.ubuntu.com> ** Changed in: linux (upstream) Status: Unknown => Confirmed -- ati_remote module responding incorrectly https://launchpad.net/bugs/50593 From tore at debian.org Wed Jul 5 09:37:05 2006 From: tore at debian.org (Tore Anderson) Date: Wed, 05 Jul 2006 09:37:05 -0000 Subject: [Bug 47528] Re: dapper rc: 'modprobe ipmi_si' hangs on dell 2850 References: <20060530163523.2141.43205.malonedeb@gangotri.ubuntu.com> Message-ID: <20060705093705.23723.3110.malone@gangotri.ubuntu.com> Confirmed; I see it here too (on a Dell 1850) with 2.6.15-25-amd64-server. This worked with the IPMI kernel modules in Breezy (and ipmitool worked fine, too): Jul 5 11:02:34 yt kernel: [11342266.490239] ipmi message handler version v33 Jul 5 11:02:34 yt kernel: [11342266.491170] IPMI System Interface driver version v33, KCS version v33, SMIC version v33, BT version v33 Jul 5 11:02:34 yt kernel: [11342266.491456] ipmi_si: Found SMBIOS-specified state machine at I/O address 0xca8, slave address 0x20 Jul 5 11:02:34 yt kernel: [11342266.704393] IPMI kcs interface initialized But with Dapper's kernel: Jul 5 11:00:09 hiro kernel: [ 1431.981776] ipmi message handler version 38.0 Jul 5 11:00:09 hiro kernel: [ 1431.983029] IPMI System Interface driver. Jul 5 11:00:09 hiro kernel: [ 1431.983048] ipmi_si: Trying "kcs" at I/O port 0xca2 Jul 5 11:00:09 hiro kernel: [ 1432.000665] ipmi_si: Trying "smic" at I/O port 0xca9 Jul 5 11:00:09 hiro kernel: [ 1432.016620] ipmi_si: Trying "bt" at I/O port 0xe4 Tore -- dapper rc: 'modprobe ipmi_si' hangs on dell 2850 https://launchpad.net/bugs/47528 From pazkooda at gmail.com Wed Jul 5 10:54:01 2006 From: pazkooda at gmail.com (Pazkooda) Date: Wed, 05 Jul 2006 10:54:01 -0000 Subject: [Bug 28443] Re: no sound Intel HDA (ICH6) and ALC260 (or ALC880) mixer; no errors References: <20060113152229.29386.74835.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060705105401.16609.29776.malone@gandwana.ubuntu.com> Hi, I just want to confirm that this bug still exists, but I have a few words: My hardware is HP dc7600 USD with Intel HDA (ALC260). With Breezy I've got sound on headphones (front) and only there. When I've ran Dapper Beta2 Live CD (booted from CD) I've had sound everywhere (everything seems to be fine). When I upgrade installed version of Breezy (final) -> Dapper (final) sound gone away totally (sound card is detected, mixers shows volume controls etc. - but no sound at all). So there is a way to enable it and it should be fixed. PS. I've also tried to recompile alsa-{driver|lib|util} to 1.0.11. I doesn't help. -- no sound Intel HDA (ICH6) and ALC260 (or ALC880) mixer; no errors https://launchpad.net/bugs/28443 From onkarshinde at rediffmail.com Wed Jul 5 10:59:01 2006 From: onkarshinde at rediffmail.com (Onkar Shinde) Date: Wed, 05 Jul 2006 10:59:01 -0000 Subject: [Bug 31993] Re: Shutdown no longer powers off computer (Dapper laptop) References: <20060219152128.1427.5421.malonedeb@gangotri.ubuntu.com> Message-ID: <20060705105901.16609.59366.malone@gandwana.ubuntu.com> Wrong package. This is related to ACPI. So rejected ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Confirmed => Rejected ** Changed in: acpi (Ubuntu) Status: Unconfirmed => Confirmed -- Shutdown no longer powers off computer (Dapper laptop) https://launchpad.net/bugs/31993 From mjg59 at codon.org.uk Wed Jul 5 11:15:54 2006 From: mjg59 at codon.org.uk (Matthew Garrett) Date: Wed, 05 Jul 2006 11:15:54 -0000 Subject: [Bug 31993] Re: Shutdown no longer powers off computer (Dapper laptop) References: <20060219152128.1427.5421.malonedeb@gangotri.ubuntu.com> Message-ID: <20060705111554.16609.59930.malone@gandwana.ubuntu.com> No, really, acpi bugs belong to the kernel. "acpi" is a small tool that prints out information about acpi status. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Rejected => Confirmed ** Changed in: acpi (Ubuntu) Status: Confirmed => Rejected -- Shutdown no longer powers off computer (Dapper laptop) https://launchpad.net/bugs/31993 From pwwnow at gmail.com Wed Jul 5 11:25:27 2006 From: pwwnow at gmail.com (Peter Whittaker) Date: Wed, 05 Jul 2006 11:25:27 -0000 Subject: [Bug 31993] Re: Shutdown no longer powers off computer (Dapper laptop) References: <20060219152128.1427.5421.malonedeb@gangotri.ubuntu.com> Message-ID: <20060705112527.23723.89092.malone@gangotri.ubuntu.com> FYI, when I opened this bug, I misassigned it because I didn't understand the wheres and hows of power management: My laptop WAS NOT and IS NOT running ACPI, it is running APM. This is most definitely not an ACPI bug, ACPI is (most likely) a red herring, at least in my case. As Matthew points out, this belongs in kernel land. -- Shutdown no longer powers off computer (Dapper laptop) https://launchpad.net/bugs/31993 From onkarshinde at rediffmail.com Wed Jul 5 12:45:51 2006 From: onkarshinde at rediffmail.com (Onkar Shinde) Date: Wed, 05 Jul 2006 12:45:51 -0000 Subject: [Bug 49191] Re: Unable to halt or reboot the system References: <20060609214942.22534.38656.malonedeb@gangotri.ubuntu.com> Message-ID: <20060705124551.23723.7669.launchpad@gangotri.ubuntu.com> *** This bug is a duplicate of bug 31993 *** ** This bug has been marked a duplicate of bug 31993 Shutdown no longer powers off computer (Dapper laptop) -- Unable to halt or reboot the system https://launchpad.net/bugs/49191 From onkarshinde at rediffmail.com Wed Jul 5 12:45:51 2006 From: onkarshinde at rediffmail.com (Onkar Shinde) Date: Wed, 05 Jul 2006 12:45:51 -0000 Subject: [Bug 31993] Re: Shutdown no longer powers off computer (Dapper laptop) References: <20060219152128.1427.5421.malonedeb@gangotri.ubuntu.com> Message-ID: <20060705124551.23723.39434.launchpad@gangotri.ubuntu.com> ** Bug 49191 has been marked a duplicate of this bug -- Shutdown no longer powers off computer (Dapper laptop) https://launchpad.net/bugs/31993 From mario.splivalo at mobart.hr Wed Jul 5 16:16:40 2006 From: mario.splivalo at mobart.hr (Mmike) Date: Wed, 05 Jul 2006 16:16:40 -0000 Subject: [Bug 50335] Load average never below 1.5 on dapper References: <20060619131811.8853.77907.malonedeb@gandwana.ubuntu.com> Message-ID: <20060705161640.16565.48900.launchpad@canonical@gandwana.ubuntu.com> Public bug reported: When I boot dapper (upgraded from breezy via apt-get dist-upgrade) on my laptop (IBM ThinkPad R52, 1.7Ghz, 1GB, Ati X300 - pcix), load average is always above or at 1.5. I turn on my laptop, boot dapper, log in, and after 15 minutes i do 'uptime', and the load average is 1.5. When I issue 'top', and sort by CPU usage (shift-f l) i see that most cpu time went to Xorg, then to thinkpad-keys and then to multiload-applet-2. Xorg, according to top, took only 15 seconds of CPU time. I'm not sure how accurate top is on gathering those information. When I boot dapper with 2.6.12 kernel, and replay what I mentioned above, load average is 0.05 with top times almost the same as with 2.6.15 kernel. I tried removing fglrx driver both from xorg.conf and putting it in /etc/modprobe.d/blacklist, the results are the same. On home desktop PC (Intel D850MV mb, 1.7Ghz P4, 768 MB RAMBUS, ATA disk driver) 2.6.15 works ok (also dapper upgraded from breezy), load avereage is 0.12, and I have firefox and evolution runnnig. ** Affects: linux-source-2.6.15 (Ubuntu) Importance: Untriaged Status: Unconfirmed -- Load average never below 1.5 on dapper https://launchpad.net/bugs/50335 From ivoks at ubuntu.com Wed Jul 5 16:16:40 2006 From: ivoks at ubuntu.com (=?utf-8?q?Ante_Karamati=C4=87?=) Date: Wed, 05 Jul 2006 16:16:40 -0000 Subject: [Bug 50335] Re: Load average never below 1.5 on dapper References: <20060619131811.8853.77907.malonedeb@gandwana.ubuntu.com> Message-ID: <20060705161640.16565.72387.launchpad@gandwana.ubuntu.com> ** Changed in: Ubuntu Sourcepackagename: None => linux-source-2.6.15 -- Load average never below 1.5 on dapper https://launchpad.net/bugs/50335 From ben.collins at ubuntu.com Wed Jul 5 17:12:28 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Wed, 05 Jul 2006 17:12:28 -0000 Subject: [Bug 32752] Re: Dell PERC 2/SC (AMI Megaraid 466(?)) not working References: <20060224172951.27067.39784.malonedeb@gangotri.ubuntu.com> Message-ID: <20060705171228.16565.82738.launchpad@gandwana.ubuntu.com> ** Changed in: linux-source-2.6.15 (Ubuntu) Assignee: (unassigned) => Ben Collins Status: Confirmed => Fix Committed ** Changed in: linux-source-2.6.12 (Ubuntu) Status: Unconfirmed => Confirmed -- Dell PERC 2/SC (AMI Megaraid 466(?)) not working https://launchpad.net/bugs/32752 From mmezo at selexco.net Wed Jul 5 18:03:23 2006 From: mmezo at selexco.net (mmezo) Date: Wed, 05 Jul 2006 18:03:23 -0000 Subject: [Bug 44246] Re: racoon-0.6.5-4ubuntu1 fails to configure References: <20060511180813.15848.37980.malonedeb@gangotri.ubuntu.com> Message-ID: <20060705180323.16609.33027.malone@gandwana.ubuntu.com> Same for me both on i386 and AMD64. I've even tried purging the package, but the problem persists. -- racoon-0.6.5-4ubuntu1 fails to configure https://launchpad.net/bugs/44246 From jzgoda at o2.pl Wed Jul 5 19:00:00 2006 From: jzgoda at o2.pl (Jarek Zgoda) Date: Wed, 05 Jul 2006 19:00:00 -0000 Subject: [Bug 51856] Re: linux image 2.6.15-25: usb device not accepting address References: <20060704160216.16609.47955.malonedeb@gandwana.ubuntu.com> Message-ID: <20060705190000.23723.52966.malone@gangotri.ubuntu.com> $ dmesg | grep usb [17179573.408000] usbcore: registered new driver usbfs [17179573.408000] usbcore: registered new driver hub [17179573.756000] usb 1-2: new low speed USB device using uhci_hcd and address 2 [17179574.280000] usb 1-2: device not accepting address 2, error -71 [17179574.764000] usb 1-2: new low speed USB device using uhci_hcd and address 4 [17179574.944000] usbcore: registered new driver hiddev [17179574.972000] input: USB HID v1.10 Mouse [Logitech USB Mouse] on usb-0000:00:1d.0-2 [17179574.972000] usbcore: registered new driver usbhid [17179574.972000] drivers/usb/input/hid-core.c: v2.6:USB HID core driver $ uname -a Linux mrowka 2.6.15-25-386 #1 PREEMPT Wed Jun 14 11:25:49 UTC 2006 i686 GNU/Linux This is HP nx6110, Celeron-M 360J running 6.06 -- linux image 2.6.15-25: usb device not accepting address https://launchpad.net/bugs/51856 From jzgoda at o2.pl Wed Jul 5 19:32:06 2006 From: jzgoda at o2.pl (Jarek Zgoda) Date: Wed, 05 Jul 2006 19:32:06 -0000 Subject: [Bug 30557] Re: cpu idle time in /proc/stat wrong References: <20060205141542.11709.55517.malonedeb@gandwana.ubuntu.com> Message-ID: <20060705193206.16609.35658.launchpad@gandwana.ubuntu.com> ** Attachment added: "dmesg output - HP nx6110" http://librarian.launchpad.net/3270776/dmesg.output -- cpu idle time in /proc/stat wrong https://launchpad.net/bugs/30557 From osch0001 at umn.edu Thu Jul 6 02:05:48 2006 From: osch0001 at umn.edu (osch0001) Date: Thu, 06 Jul 2006 02:05:48 -0000 Subject: [Bug 35174] Re: ThinkPad X60 cannot Resume from Suspend References: <20060316100325.6510.84147.malonedeb@gangotri.ubuntu.com> Message-ID: <20060706020548.16565.23814.malone@gandwana.ubuntu.com> Suspend to RAM properly restores my session about once every eight tries on my new X60s. Most of the time it doesn't make it to the point where the LCD is turned on. I have tried both 2.6.15-25.4 from Dapper and 2.6.17-4.5 from Edgy. Hibernate is more reliable. I have acpi-support 0.85 installed. My HD is a FUJITSU MHV2100B. I will attach some relevant log snippets that include the time from when I suspend the machine to the point where I get sick of waiting for it to resume and force a power down. I also experience the hang on boot, but I will comment on that bug separately. ** Attachment added: "Log of suspend to RAM sequence" http://librarian.launchpad.net/3276067/syslog-suspend ** Attachment added: "Another log of the failed suspend sequence" http://librarian.launchpad.net/3276229/syslog-suspend.2 -- ThinkPad X60 cannot Resume from Suspend https://launchpad.net/bugs/35174 From osch0001 at umn.edu Thu Jul 6 02:11:25 2006 From: osch0001 at umn.edu (osch0001) Date: Thu, 06 Jul 2006 02:11:25 -0000 Subject: [Bug 50588] Re: Slow boot time since update to kernel 2.6.15-25-686 References: <20060621173616.23311.67847.malonedeb@gangotri.ubuntu.com> Message-ID: <20060706021125.16609.27453.malone@gandwana.ubuntu.com> I am experiencing this on my Thinkpad X60s. /proc/mounts: rootfs / rootfs rw 0 0 none /sys sysfs rw 0 0 none /proc proc rw 0 0 udev /dev tmpfs rw 0 0 /dev/mapper/ubuntu-root / ext3 rw,noatime,data=ordered 0 0 /dev/mapper/ubuntu-root /dev/.static/dev ext3 rw,data=ordered 0 0 tmpfs /var/run tmpfs rw 0 0 tmpfs /var/lock tmpfs rw 0 0 usbfs /proc/bus/usb usbfs rw 0 0 devpts /dev/pts devpts rw 0 0 tmpfs /dev/shm tmpfs rw 0 0 tmpfs /var/run tmpfs rw 0 0 tmpfs /var/lock tmpfs rw 0 0 /dev/sda3 /boot ext3 rw,noatime,data=ordered 0 0 /dev/mapper/ubuntu-home /home ext3 rw,noatime,data=ordered 0 0 /dev/sda1 /media/sda1 ntfs ro,uid=0,gid=46,umask=07,nls=utf8,errors=continue,mft_zone_multiplier=1 0 0 /dev/sda2 /media/sda2 vfat rw,gid=46,fmask=0007,dmask=0007,codepage=cp437,iocharset=iso8859-1,utf8 0 0 /dev/mapper/ubuntu-tmp /tmp ext3 rw,noatime,data=ordered 0 0 /dev/mapper/ubuntu-usr /usr ext3 rw,noatime,data=ordered 0 0 /dev/mapper/ubuntu-var /var ext3 rw,noatime,data=ordered 0 0 binfmt_misc /proc/sys/fs/binfmt_misc binfmt_misc rw 0 0 /etc/fstab: proc /proc proc defaults 0 0 /dev/mapper/ubuntu-root / ext3 defaults,errors=remount-ro 0 1 /dev/sda3 /boot ext3 defaults 0 2 /dev/mapper/ubuntu-home /home ext3 defaults,user_xattr 0 2 /dev/sda1 /media/sda1 ntfs defaults,nls=utf8,umask=007,gid=46 0 1 /dev/sda2 /media/sda2 vfat defaults,utf8,umask=007,gid=46 0 1/dev/mapper/ubuntu-tmp /tmp ext3 defaults 0 2 /dev/mapper/ubuntu-usr /usr ext3 defaults 0 2 /dev/mapper/ubuntu-var /var ext3 defaults 0 2 /dev/mapper/ubuntu-swap none swap sw 0 0 -- Slow boot time since update to kernel 2.6.15-25-686 https://launchpad.net/bugs/50588 From bugwatch at bugs.launchpad.net Thu Jul 6 05:37:48 2006 From: bugwatch at bugs.launchpad.net (Bug Watch Updater) Date: Thu, 06 Jul 2006 05:37:48 -0000 Subject: [Bug 32643] Re: unmounting of removable drives should show a progress dialog References: <20060223195803.16638.78013.malonedeb@gandwana.ubuntu.com> Message-ID: <20060706053754.26298.97668.launchpad@gangotri.ubuntu.com> ** Changed in: nautilus (upstream) Status: Unconfirmed => Confirmed -- unmounting of removable drives should show a progress dialog https://launchpad.net/bugs/32643 From albrecht.gebhardt at uni-klu.ac.at Thu Jul 6 07:58:18 2006 From: albrecht.gebhardt at uni-klu.ac.at (Albrecht Gebhardt) Date: Thu, 06 Jul 2006 07:58:18 -0000 Subject: [Bug 33030] Re: No SATA support for VIA VT8251 (e.g. on ASUS A8V MX) References: <20060227120715.16638.76305.malonedeb@gandwana.ubuntu.com> Message-ID: <20060706075818.16565.99790.malone@gandwana.ubuntu.com> Please can someone change the status of this bug from "Fix released" to something other? The fix that had been released (somewhere in march as 2.6.15-19.28) stopped working before final dapper release (somewhere at 2.6.15-21.XX). Instead a new fix is needed, which I posted two messages above in the comment history of this bug. Albrecht -- No SATA support for VIA VT8251 (e.g. on ASUS A8V MX) https://launchpad.net/bugs/33030 From nkbj at mail.tele.dk Thu Jul 6 08:11:38 2006 From: nkbj at mail.tele.dk (Niels Kristian Bech Jensen) Date: Thu, 06 Jul 2006 08:11:38 -0000 Subject: [Bug 30273] Re: linux-image-2.6.15-14-powerpc does not boot on "50 (PowerBook Wallstreet)" References: <20060201225707.3906.28595.malonedeb@gangotri.ubuntu.com> Message-ID: <20060706081138.23723.80493.malone@gangotri.ubuntu.com> I close this bug again since this boot problem and the one in 2.6.17 are two different issues. In 2.6.15 (Dapper) the kernel didn't boot with BootX - period. That was fixed in 2.6.15-23-powerpc. The 2.6.17 (Edgy) kernel boots fine when no initial ramdisk (initrd.img) is choosen in BootX. It obviously cannot find the root filesystem when and panics. This bug is reported as bug #50746 and is still open. ** Changed in: linux-source-2.6.17 (Ubuntu) Status: Needs Info => Fix Released -- linux-image-2.6.15-14-powerpc does not boot on "50 (PowerBook Wallstreet)" https://launchpad.net/bugs/30273 From darteaga at ub.edu Thu Jul 6 12:36:41 2006 From: darteaga at ub.edu (darteaga) Date: Thu, 06 Jul 2006 12:36:41 -0000 Subject: [Bug 49052] Re: no hfs+ journal support References: <20060608210026.22460.88777.malonedeb@gangotri.ubuntu.com> Message-ID: <20060706123641.18269.90321.malone@gandwana.ubuntu.com> Confirmed with a mac-formatted 5th generation iPod. (It is not possible to write on it although the device appears mounted with rw permissions). I think that this an important bug for many people coming from the mac world... -- no hfs+ journal support https://launchpad.net/bugs/49052 From darteaga at ub.edu Thu Jul 6 12:42:07 2006 From: darteaga at ub.edu (darteaga) Date: Thu, 06 Jul 2006 12:42:07 -0000 Subject: [Bug 49052] Re: no hfs+ journal support References: <20060608210026.22460.88777.malonedeb@gangotri.ubuntu.com> Message-ID: <20060706124207.11809.38782.malone@gangotri.ubuntu.com> Confirmed with a mac-formatted 5th generation iPod. (It is not possible to write on it although the device appears mounted with rw permissions). I think that this an important bug for many people coming from the mac world... -- no hfs+ journal support https://launchpad.net/bugs/49052 From domi_mailing-list at yahoo.it Thu Jul 6 13:35:48 2006 From: domi_mailing-list at yahoo.it (scido) Date: Thu, 06 Jul 2006 13:35:48 -0000 Subject: [Bug 37163] Re: Ipods react badly to checks for EFI partition tables References: <20060329132453.6279.44854.malonedeb@gandwana.ubuntu.com> Message-ID: <20060706133548.18493.45820.malone@gandwana.ubuntu.com> Hi everyone. I've got an iPod Nano 4Gb and I get some problems. First, I found a difference between kernel 2.6.15-23 and 2.6.15-25. With the last one (2.6.15-25) I'm unable to copy both files using konqueror (as a normal USB Hard Disk) and music or photos using software like amarok, gpixpod and so on. With kernel 2.6.15-23 I'm able to copy music and photos with amarok and gpixpod BUT I'm unable to copy files using konqueror: when I try to do it, I get the same error: reset high speed USB device using ehci_hcd and address I tried vanilla kernel from kernel.org (2.6.17.3) too, but nothing changes. I hope it'll help someone to resolve this problem. Regards Scido -- Ipods react badly to checks for EFI partition tables https://launchpad.net/bugs/37163 From aelmahmoudy at users.sourceforge.net Thu Jul 6 15:08:54 2006 From: aelmahmoudy at users.sourceforge.net (Ahmed El-Mahmoudy) Date: Thu, 06 Jul 2006 15:08:54 -0000 Subject: [Bug 52108] Does not boot on laptops References: <20060706150855.11752.29087.malonedeb@gangotri.ubuntu.com> Message-ID: <20060706150855.11752.29087.malonedeb@gangotri.ubuntu.com> Public bug reported: Binary package hint: linux-image-2.6.15-25-686 I am using Dapper, and after I upgraded to linux-image-2.6.15-25-686, my laptop wouldn't boot using that image. I am using an HP dv4141ea laptop. Another colleague of mine using a Toshiba laptop has the same problem. ** Affects: linux-source-2.6.15 (Ubuntu) Importance: Untriaged Status: Unconfirmed -- Does not boot on laptops https://launchpad.net/bugs/52108 From Lex.Hider at gmail.com Thu Jul 6 15:18:59 2006 From: Lex.Hider at gmail.com (lexual) Date: Thu, 06 Jul 2006 15:18:59 -0000 Subject: [Bug 50859] Will not unmount Motorola RAZR V3X mobile phone's miniSD flash card. References: <20060624140416.23397.82488.malonedeb@gangotri.ubuntu.com> Message-ID: <20060706151859.18493.61053.launchpad@canonical@gandwana.ubuntu.com> Public bug reported: Binary package hint: hal-device-manager My mobile phone is a Motorola RAZR V3X. It has a mini-SD memory card. The phone is on the settingof "storage device" so the memory should just come up as a generic storage drive. Using the phone like this works fine with XP. When I plug the phone in with Ubuntu dapper, it is mounted fine and I can copy files to the drive. The problem occurs when I try to unmount it. The drive is never unmounted. The popup saying "removing device" "writing data to storage device usbdisk" "please do not remove the device while this operation is in progress". This popup never finished. If I look at top I can see the processes still running are: usb-storage umount hald-addon-storage I am very willing to attach any more relevant needed to help with this bug, Thanks, Lex. ** Affects: linux-meta (Ubuntu) Importance: Untriaged Status: Unconfirmed -- Will not unmount Motorola RAZR V3X mobile phone's miniSD flash card. https://launchpad.net/bugs/50859 From Lex.Hider at gmail.com Thu Jul 6 15:18:59 2006 From: Lex.Hider at gmail.com (lexual) Date: Thu, 06 Jul 2006 15:18:59 -0000 Subject: [Bug 50859] Re: Will not unmount Motorola RAZR V3X mobile phone's miniSD flash card. References: <20060624140416.23397.82488.malonedeb@gangotri.ubuntu.com> Message-ID: <20060706151859.18493.17831.malone@gandwana.ubuntu.com> appears to be a kernel bug with a patch pending: http://www.linuxquestions.org/questions/showthread.php?t=445645 ** Changed in: hal (Ubuntu) Sourcepackagename: hal => linux-meta -- Will not unmount Motorola RAZR V3X mobile phone's miniSD flash card. https://launchpad.net/bugs/50859 From thotz at gmx.at Thu Jul 6 16:20:20 2006 From: thotz at gmx.at (Thomas Hotz) Date: Thu, 06 Jul 2006 16:20:20 -0000 Subject: [Bug 52108] Re: Does not boot on laptops References: <20060706150855.11752.29087.malonedeb@gangotri.ubuntu.com> Message-ID: <20060706162020.18269.72555.malone@gandwana.ubuntu.com> Is it bug #50588? ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Unconfirmed => Needs Info -- Does not boot on laptops https://launchpad.net/bugs/52108 From osch0001 at umn.edu Thu Jul 6 17:02:25 2006 From: osch0001 at umn.edu (osch0001) Date: Thu, 06 Jul 2006 17:02:25 -0000 Subject: [Bug 51883] Re: laptop X60s can not sleep and hibernate References: <20060704195418.16609.82788.malonedeb@gandwana.ubuntu.com> Message-ID: <20060706170225.11809.9866.launchpad@gangotri.ubuntu.com> *** This bug is a duplicate of bug 35174 *** ** This bug has been marked a duplicate of bug 35174 ThinkPad X60 cannot Resume from Suspend -- laptop X60s can not sleep and hibernate https://launchpad.net/bugs/51883 From osch0001 at umn.edu Thu Jul 6 17:02:25 2006 From: osch0001 at umn.edu (osch0001) Date: Thu, 06 Jul 2006 17:02:25 -0000 Subject: [Bug 35174] Re: ThinkPad X60 cannot Resume from Suspend References: <20060316100325.6510.84147.malonedeb@gangotri.ubuntu.com> Message-ID: <20060706170225.11809.67458.launchpad@gangotri.ubuntu.com> ** Bug 51883 has been marked a duplicate of this bug -- ThinkPad X60 cannot Resume from Suspend https://launchpad.net/bugs/35174 From kernelpanic.1.0 at googlemail.com Thu Jul 6 17:31:03 2006 From: kernelpanic.1.0 at googlemail.com (Swen) Date: Thu, 06 Jul 2006 17:31:03 -0000 Subject: [Bug 33368] Re: X freeze the computer (Dapper - glcore) References: <20060302082234.17525.50004.malonedeb@gangotri.ubuntu.com> Message-ID: <20060706173103.11809.8396.malone@gangotri.ubuntu.com> Confirmed with Xubuntu on a IBM Thinkpad T21. Adding Option "ShadowStatus" to Xorg.conf Device Section did not solve it, but Option "BusType" "PCI" Option "DmaMode" "None". -- X freeze the computer (Dapper - glcore) https://launchpad.net/bugs/33368 From cbond at umci.com Thu Jul 6 18:06:51 2006 From: cbond at umci.com (KnottyMan) Date: Thu, 06 Jul 2006 18:06:51 -0000 Subject: [Bug 51157] Re: 6.06 64bit kernel totally broken after install, gcc3.3 fixes References: <20060627232049.17086.52183.malonedeb@gangotri.ubuntu.com> Message-ID: <20060706180651.18269.49008.malone@gandwana.ubuntu.com> Yes, the installer works just fine. This is after a fresh install. No tweaks have been done. Downloaded the Alt Install 64bit CD ISO. Boot from it, run through the installer, reboot, blam. The CD is ok as I can install AMD 64bit systems and it works great with no problems. On first login I try to run apt - libcrypto.9.8 bad ELF header and when I try ftp, libreadline bad ELF header. Pico/nano works ok. Here's dmesg: [ 0.000000] Bootdata ok (command line is root=/dev/sda2 ro quiet splash) [ 0.000000] Linux version 2.6.15-23-amd64-generic (buildd at yellow) (gcc version 4.0.3 (Ubuntu 4.0.3-1ubuntu5)) #1 SMP PREEMPT Tue May 23 13:45:47 UTC 2006 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009b800 (usable) [ 0.000000] BIOS-e820: 000000000009b800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007ff70000 (usable) [ 0.000000] BIOS-e820: 000000007ff70000 - 000000007ff78000 (ACPI data) [ 0.000000] BIOS-e820: 000000007ff78000 - 000000007ff80000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007ff80000 - 0000000080000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ff800000 - 00000000ffc00000 (reserved) [ 0.000000] BIOS-e820: 00000000fffffc00 - 0000000100000000 (reserved) [ 0.000000] ACPI: RSDP (v000 PTLTD ) @ 0x00000000000f5d40 [ 0.000000] ACPI: RSDT (v001 PTLTD RSDT 0x06040000 LTP 0x00000000) @ 0x000000007ff72f92 [ 0.000000] ACPI: FADT (v001 INTEL LINDHRST 0x06040000 PTL 0x00000003) @ 0x000000007ff77e2c [ 0.000000] ACPI: MADT (v001 PTLTD APIC 0x06040000 LTP 0x00000000) @ 0x000000007ff77ea0 [ 0.000000] ACPI: BOOT (v001 PTLTD $SBFTBL$ 0x06040000 LTP 0x00000001) @ 0x000000007ff77f48 [ 0.000000] ACPI: SPCR (v001 PTLTD $UCRTBL$ 0x06040000 PTL 0x00000001) @ 0x000000007ff77f70 [ 0.000000] ACPI: MCFG (v001 PTLTD MCFG 0x06040000 LTP 0x00000000) @ 0x000000007ff77fc0 [ 0.000000] ACPI: SSDT (v001 PmRef CpuPm 0x00003000 INTL 0x20030224) @ 0x000000007ff72fce [ 0.000000] ACPI: DSDT (v001 Intel LINDHRST 0x06040000 MSFT 0x0100000e) @ 0x0000000000000000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-000000007ff70000 [ 0.000000] Bootmem setup node 0 0000000000000000-000000007ff70000 [ 0.000000] On node 0 totalpages: 515952 [ 0.000000] DMA zone: 3014 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 512938 pages, LIFO batch:31 [ 0.000000] Normal zone: 0 pages, LIFO batch:0 [ 0.000000] HighMem zone: 0 pages, LIFO batch:0 [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 15:4 APIC version 20 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x06] enabled) [ 0.000000] Processor #6 15:4 APIC version 20 [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] Processor #1 15:4 APIC version 20 [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x07] enabled) [ 0.000000] Processor #7 15:4 APIC version 20 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: IOAPIC (id[0x03] address[0xfec10000] gsi_base[24]) [ 0.000000] IOAPIC[1]: apic_id 3, version 32, address 0xfec10000, GSI 24-47 [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec80000] gsi_base[48]) [ 0.000000] IOAPIC[2]: apic_id 4, version 32, address 0xfec80000, GSI 48-71 [ 0.000000] ACPI: IOAPIC (id[0x05] address[0xfec80400] gsi_base[72]) [ 0.000000] IOAPIC[3]: apic_id 5, version 32, address 0xfec80400, GSI 72-95 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Setting APIC routing to physical flat [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:60000000) [ 0.000000] Checking aperture... [ 0.000000] SMP: Allowing 6 CPUs, 2 hotplug CPUs [ 0.000000] Built 1 zonelists [ 0.000000] Kernel command line: root=/dev/sda2 ro quiet splash [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 131072 bytes) [ 0.000000] time.c: Using 3.579545 MHz PM timer. [ 0.000000] time.c: Detected 3000.256 MHz processor. [ 40.127043] Console: colour VGA+ 80x25 [ 40.128544] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 40.130681] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 40.152211] Memory: 2053232k/2096576k available (2139k kernel code, 42940k reserved, 754k data, 180k init) [ 40.211373] Calibrating delay using timer specific routine.. 6006.18 BogoMIPS (lpj=3003090) [ 40.211434] Security Framework v1.0.0 initialized [ 40.211441] SELinux: Disabled at boot. [ 40.211467] Mount-cache hash table entries: 256 [ 40.211598] CPU: Trace cache: 12K uops, L1 D cache: 16K [ 40.211601] CPU: L2 cache: 1024K [ 40.211605] using mwait in idle threads. [ 40.211608] CPU: Physical Processor ID: 0 [ 40.211619] CPU0: Thermal monitoring enabled (TM1) [ 40.211624] mtrr: v2.0 (20020519) [ 40.211635] SMP alternatives: switching to UP code [ 40.212024] checking if image is initramfs... it is [ 40.929634] Freeing initrd memory: 7102k freed [ 40.936305] ACPI: Looking for DSDT ... not found! [ 40.948797] Using local APIC timer interrupts. [ 40.982101] Detected 12.501 MHz APIC timer. [ 40.982248] SMP alternatives: switching to SMP code [ 40.982501] Booting processor 1/4 APIC 0x6 [ 40.992881] Initializing CPU#1 [ 41.053447] Calibrating delay using timer specific routine.. 5999.39 BogoMIPS (lpj=2999696) [ 41.053459] CPU: Trace cache: 12K uops, L1 D cache: 16K [ 41.053461] CPU: L2 cache: 1024K [ 41.053465] CPU: Physical Processor ID: 3 [ 41.053476] CPU1: Thermal monitoring enabled (TM1) [ 41.053706] Intel(R) Xeon(TM) CPU 3.00GHz stepping 01 [ 41.053715] APIC error on CPU1: 00(40) [ 41.053718] CPU 1: Syncing TSC to CPU 0. [ 41.053904] CPU 1: synchronized TSC with CPU 0 (last diff -57 cycles, maxerr 1140 cycles) [ 41.053977] SMP alternatives: switching to SMP code [ 41.054027] Booting processor 2/4 APIC 0x1 [ 41.064434] Initializing CPU#2 [ 41.125369] Calibrating delay using timer specific routine.. 5999.49 BogoMIPS (lpj=2999749) [ 41.125382] CPU: Trace cache: 12K uops, L1 D cache: 16K [ 41.125385] CPU: L2 cache: 1024K [ 41.125389] CPU: Physical Processor ID: 0 [ 41.125402] CPU2: Thermal monitoring enabled (TM1) [ 41.125668] Intel(R) Xeon(TM) CPU 3.00GHz stepping 01 [ 41.125679] APIC error on CPU2: 00(40) [ 41.125683] CPU 2: Syncing TSC to CPU 0. [ 41.125820] CPU 2: synchronized TSC with CPU 0 (last diff -150 cycles, maxerr 937 cycles) [ 41.125927] SMP alternatives: switching to SMP code [ 41.126073] Booting processor 3/4 APIC 0x7 [ 41.136451] Initializing CPU#3 [ 41.197290] Calibrating delay using timer specific routine.. 5999.49 BogoMIPS (lpj=2999746) [ 41.197302] CPU: Trace cache: 12K uops, L1 D cache: 16K [ 41.197303] CPU: L2 cache: 1024K [ 41.197307] CPU: Physical Processor ID: 3 [ 41.197318] CPU3: Thermal monitoring enabled (TM1) [ 41.197548] Intel(R) Xeon(TM) CPU 3.00GHz stepping 01 [ 41.197557] APIC error on CPU3: 00(40) [ 41.197560] CPU 3: Syncing TSC to CPU 0. [ 41.197744] CPU 3: synchronized TSC with CPU 0 (last diff 15 cycles, maxerr 1252 cycles) [ 41.197755] Brought up 4 CPUs [ 41.197793] time.c: Using PIT/TSC based timekeeping. [ 41.197796] testing NMI watchdog ... OK. [ 41.208305] NET: Registered protocol family 16 [ 41.208336] ACPI: bus type pci registered [ 41.208344] PCI: Using configuration type 1 [ 41.214339] PCI: Using MMCONFIG at e0000000 [ 41.215320] ACPI: Subsystem revision 20051216 [ 41.218192] ACPI: Interpreter enabled [ 41.218195] ACPI: Using IOAPIC for interrupt routing [ 41.218769] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 41.218772] PCI: Probing PCI hardware (bus 00) [ 41.221619] PCI quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO [ 41.221623] PCI quirk: region 1180-11bf claimed by ICH4 GPIO [ 41.221657] PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 [ 41.221751] PCI: PXH quirk detected, disabling MSI for SHPC device [ 41.221805] PCI: PXH quirk detected, disabling MSI for SHPC device [ 41.222584] Boot video device is 0000:08:01.0 [ 41.222630] PCI: Transparent bridge - 0000:00:1e.0 [ 41.222674] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 41.226967] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT] [ 41.227184] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0.PXH0._PRT] [ 41.227543] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0.PXH1._PRT] [ 41.227767] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEY0._PRT] [ 41.227986] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEZ0._PRT] [ 41.228434] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIX._PRT] [ 41.228607] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] [ 41.229406] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 11 14 15) [ 41.229623] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 14 15) [ 41.229836] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 14 15) [ 41.230048] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 14 15) [ 41.230265] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled. [ 41.230475] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 6 7 10 11 14 15) *0, disabled. [ 41.230686] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *10 11 14 15) [ 41.230901] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 6 7 10 *11 14 15) [ 41.233593] Linux Plug and Play Support v0.97 (c) Adam Belay [ 41.233603] pnp: PnP ACPI init [ 41.236668] pnp: PnP ACPI: found 13 devices [ 41.236687] PCI: Using ACPI for IRQ routing [ 41.236689] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 41.236835] PCI-DMA: Disabling IOMMU. [ 41.237288] PCI: Bridge: 0000:01:00.0 [ 41.237290] IO window: disabled. [ 41.237293] MEM window: disabled. [ 41.237295] PREFETCH window: disabled. [ 41.237299] PCI: Bridge: 0000:03:02.0 [ 41.237301] IO window: disabled. [ 41.237305] MEM window: dd200000-dd2fffff [ 41.237308] PREFETCH window: 88000000-880fffff [ 41.237312] PCI: Bridge: 0000:01:00.2 [ 41.237313] IO window: disabled. [ 41.237317] MEM window: dd200000-dd2fffff [ 41.237320] PREFETCH window: 88000000-880fffff [ 41.237323] PCI: Bridge: 0000:00:02.0 [ 41.237324] IO window: disabled. [ 41.237327] MEM window: dd100000-dd2fffff [ 41.237331] PREFETCH window: 88000000-880fffff [ 41.237334] PCI: Bridge: 0000:00:04.0 [ 41.237335] IO window: disabled. [ 41.237338] MEM window: disabled. [ 41.237340] PREFETCH window: disabled. [ 41.237343] PCI: Bridge: 0000:00:06.0 [ 41.237345] IO window: disabled. [ 41.237347] MEM window: disabled. [ 41.237350] PREFETCH window: disabled. [ 41.237353] PCI: Bridge: 0000:00:1c.0 [ 41.237356] IO window: 2000-2fff [ 41.237360] MEM window: dd300000-dd3fffff [ 41.237362] PREFETCH window: disabled. [ 41.237366] PCI: Bridge: 0000:00:1e.0 [ 41.237369] IO window: 3000-3fff [ 41.237373] MEM window: dd400000-deffffff [ 41.237377] PREFETCH window: 88100000-881fffff [ 41.237390] GSI 16 sharing vector 0xA9 and IRQ 16 [ 41.237393] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 169 [ 41.237399] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 41.237409] PCI: Setting latency timer of device 0000:01:00.0 to 64 [ 41.237419] PCI: Setting latency timer of device 0000:01:00.2 to 64 [ 41.237432] ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 16 (level, low) -> IRQ 169 [ 41.237436] PCI: Setting latency timer of device 0000:00:04.0 to 64 [ 41.237444] ACPI: PCI Interrupt 0000:00:06.0[A] -> GSI 16 (level, low) -> IRQ 169 [ 41.237448] PCI: Setting latency timer of device 0000:00:06.0 to 64 [ 41.237460] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 41.237570] Simple Boot Flag at 0x39 set to 0x1 [ 41.238509] IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $ [ 41.238981] audit: initializing netlink socket (disabled) [ 41.238996] audit(1152183377.112:1): initialized [ 41.239237] VFS: Disk quotas dquot_6.5.1 [ 41.239262] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 41.239327] Initializing Cryptographic API [ 41.239333] io scheduler noop registered [ 41.239345] io scheduler anticipatory registered [ 41.239356] io scheduler deadline registered [ 41.239384] io scheduler cfq registered [ 41.240693] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 169 [ 41.240700] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 41.240718] Allocate Port Service[pcie00] [ 41.240761] Allocate Port Service[pcie01] [ 41.240809] ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 16 (level, low) -> IRQ 169 [ 41.240814] PCI: Setting latency timer of device 0000:00:04.0 to 64 [ 41.240831] Allocate Port Service[pcie00] [ 41.240872] Allocate Port Service[pcie01] [ 41.240916] ACPI: PCI Interrupt 0000:00:06.0[A] -> GSI 16 (level, low) -> IRQ 169 [ 41.240921] PCI: Setting latency timer of device 0000:00:06.0 to 64 [ 41.240939] Allocate Port Service[pcie00] [ 41.240973] Allocate Port Service[pcie01] [ 41.261427] Real Time Clock Driver v1.12 [ 41.261482] Linux agpgart interface v0.101 (c) Dave Jones [ 41.261639] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12 [ 41.275115] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 41.276010] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 41.276017] Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled [ 41.276196] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 41.276314] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 41.278672] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 41.278844] 00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 41.279503] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 41.279573] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 41.279578] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 41.279797] mice: PS/2 mouse device common for all mice [ 41.281691] NET: Registered protocol family 2 [ 41.296634] IP route cache hash table entries: 65536 (order: 7, 524288 bytes) [ 41.297117] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 41.300516] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 41.301160] TCP: Hash tables configured (established 262144 bind 65536) [ 41.301164] TCP reno registered [ 41.301321] TCP bic registered [ 41.301333] NET: Registered protocol family 1 [ 41.301342] NET: Registered protocol family 8 [ 41.301344] NET: Registered protocol family 20 [ 41.301499] ACPI wakeup devices: [ 41.301502] PEX0 PXH0 PXH1 PEY0 PEZ0 USB1 USB2 EUSB PCIX PCIB KBC0 MSE0 [ 41.301512] ACPI: (supports S0 S1 S4 S5) [ 41.301578] Freeing unused kernel memory: 180k freed [ 41.317652] input: AT Translated Set 2 keyboard as /class/input/input0 [ 41.356843] vga16fb: initializing [ 41.356848] vga16fb: mapped to 0xffff8100000a0000 [ 41.509803] Console: switching to colour frame buffer device 80x25 [ 41.509809] fb0: VGA16 VGA frame buffer device [ 42.527222] Capability LSM initialized [ 43.074419] SCSI subsystem initialized [ 43.075368] GSI 17 sharing vector 0xB1 and IRQ 17 [ 43.075374] ACPI: PCI Interrupt 0000:04:0e.0[A] -> GSI 74 (level, low) -> IRQ 177 [ 43.075430] scsi_proc_hostdir_add: proc_mkdir failed for [ 43.075435] ARECA RAID ADAPTER0: 64BITS PCI BUS DMA ADDRESSING SUPPORTED [ 43.086949] ARECA RAID ADAPTER0: FIRMWARE VERSION V1.36 2005-3-17 [ 43.097915] scsi0 : ARECA ARC1120 PCI-X 8 PORTS SATA RAID CONTROLLER (RAID6-ENGINE Inside) [ 43.097917] Driver Version 1.20.00.13 [ 43.099096] Vendor: Areca Model: ARC-1120-VOL#00 Rev: R001 [ 43.099112] Type: Direct-Access ANSI SCSI revision: 03 [ 43.099302] Vendor: Areca Model: ARC-1120-VOL#01 Rev: R001 [ 43.099317] Type: Direct-Access ANSI SCSI revision: 03 [ 43.100292] Vendor: Areca Model: RAID controller Rev: R001 [ 43.100306] Type: Processor ANSI SCSI revision: 00 [ 43.109481] Driver 'sd' needs updating - please use bus_type methods [ 43.109651] SCSI device sda: 97653760 512-byte hdwr sectors (49999 MB) [ 43.109732] SCSI device sda: drive cache: write back [ 43.109856] SCSI device sda: 97653760 512-byte hdwr sectors (49999 MB) [ 43.109932] SCSI device sda: drive cache: write back [ 43.109938] sda: sda1 sda2 sda3 sda4 [ 43.124022] sd 0:0:0:0: Attached scsi disk sda [ 43.124103] SCSI device sdb: 3808591360 512-byte hdwr sectors (1949999 MB) [ 43.124160] SCSI device sdb: drive cache: write back [ 43.124267] SCSI device sdb: 3808591360 512-byte hdwr sectors (1949999 MB) [ 43.124321] SCSI device sdb: drive cache: write back [ 43.124324] sdb: sdb1 [ 43.130056] sd 0:0:0:1: Attached scsi disk sdb [ 43.543930] ICH5: IDE controller at PCI slot 0000:00:1f.1 [ 43.543945] GSI 18 sharing vector 0xB9 and IRQ 18 [ 43.543949] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 185 [ 43.543960] ICH5: chipset revision 2 [ 43.543962] ICH5: not 100% native mode: will probe irqs later [ 43.543972] ide0: BM-DMA at 0x1460-0x1467, BIOS settings: hda:pio, hdb:pio [ 43.543984] ide1: BM-DMA at 0x1468-0x146f, BIOS settings: hdc:pio, hdd:pio [ 43.543993] Probing IDE interface ide0... [ 44.063048] Probing IDE interface ide1... [ 44.988439] hdd: HL-DT-STDVD-ROM GDR8163B, ATAPI CD/DVD-ROM drive [ 45.044713] ide1 at 0x170-0x177,0x376 on irq 15 [ 45.054674] hdd: ATAPI 52X DVD-ROM drive, 256kB Cache, UDMA(33) [ 45.054684] Uniform CD-ROM driver Revision: 3.20 [ 45.119213] usbcore: registered new driver usbfs [ 45.120046] usbcore: registered new driver hub [ 45.121697] USB Universal Host Controller Interface driver v2.3 [ 45.121775] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 169 [ 45.121789] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 45.121793] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 45.122211] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 45.122227] uhci_hcd 0000:00:1d.0: irq 169, io base 0x00001400 [ 45.122373] hub 1-0:1.0: USB hub found [ 45.122385] hub 1-0:1.0: 2 ports detected [ 45.223202] GSI 19 sharing vector 0xC1 and IRQ 19 [ 45.223207] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 193 [ 45.223219] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 45.223222] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 45.223354] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 [ 45.223368] uhci_hcd 0000:00:1d.1: irq 193, io base 0x00001420 [ 45.223664] hub 2-0:1.0: USB hub found [ 45.223672] hub 2-0:1.0: 2 ports detected [ 45.325615] GSI 20 sharing vector 0xC9 and IRQ 20 [ 45.325620] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 201 [ 45.326188] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 45.326194] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 45.326233] ehci_hcd 0000:00:1d.7: debug port 1 [ 45.326239] PCI: cache line size of 128 is not supported by device 0000:00:1d.7 [ 45.326484] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 3 [ 45.326497] ehci_hcd 0000:00:1d.7: irq 201, io mem 0xdd001400 [ 45.330380] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 45.330744] hub 3-0:1.0: USB hub found [ 45.330756] hub 3-0:1.0: 4 ports detected [ 45.449631] Probing IDE interface ide0... [ 46.008040] Attempting manual resume [ 46.015005] ReiserFS: sda2: found reiserfs format "3.6" with standard journal [ 46.132226] ReiserFS: sda2: using ordered data mode [ 46.132459] ReiserFS: sda2: journal params: device sda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 [ 46.133768] ReiserFS: sda2: checking transaction log (sda2) [ 46.134376] ReiserFS: sda2: Using r5 hash to sort names [ 48.859612] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 48.859667] sd 0:0:0:1: Attached scsi generic sg1 type 0 [ 48.859722] 0:0:16:0: Attached scsi generic sg2 type 3 [ 50.901135] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 50.915976] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 51.009330] hw_random hardware driver 1.0.0 loaded [ 51.015116] input: PC Speaker as /class/input/input1 [ 51.213471] Floppy drive(s): fd0 is 1.44M [ 51.228449] FDC 0 is a post-1991 82077 [ 51.236883] Intel(R) PRO/1000 Network Driver - version 7.0.33-k2 [ 51.236889] Copyright (c) 1999-2005 Intel Corporation. [ 51.236974] GSI 21 sharing vector 0xD1 and IRQ 21 [ 51.236979] ACPI: PCI Interrupt 0000:07:01.0[A] -> GSI 24 (level, low) -> IRQ 209 [ 51.261375] parport: PnPBIOS parport detected. [ 51.261481] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA] [ 51.286726] e1000: 0000:07:01.0: e1000_probe: (PCI:66MHz:32-bit) 00:30:48:74:65:18 [ 51.428870] e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection [ 51.428906] GSI 22 sharing vector 0xD9 and IRQ 22 [ 51.428912] ACPI: PCI Interrupt 0000:07:02.0[A] -> GSI 25 (level, low) -> IRQ 217 [ 51.470120] input: ImExPS/2 Generic Explorer Mouse as /class/input/input2 [ 51.486922] ts: Compaq touchscreen protocol output [ 51.689310] e1000: 0000:07:02.0: e1000_probe: (PCI:66MHz:32-bit) 00:30:48:74:65:19 [ 51.837395] e1000: eth1: e1000_probe: Intel(R) PRO/1000 Network Connection [ 52.009797] lp0: using parport0 (interrupt-driven). [ 52.102647] Adding 3903784k swap on /dev/sda4. Priority:-1 extents:1 across:3903784k [ 52.605537] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 [ 52.605541] md: bitmap version 4.39 [ 54.512809] e1000: eth0: e1000_watchdog_task: NIC Link is Up 1000 Mbps Full Duplex [ 54.778685] dd[3872] general protection rip:2aaaaaaaca60 rsp:7fffffd8ebf0 error:0 [ 55.052536] pcc_acpi: loading... [ 55.065184] ACPI: Power Button (FF) [PWRF] [ 55.065219] ACPI: Power Button (CM) [PWRB] [ 55.116522] ibm_acpi: ec object not found [ 55.494112] dd[4276] general protection rip:2aaaaaaaca60 rsp:7ffffff0c6e0 error:0 [ 55.526152] pam_getenv[4286]: segfault at 00002aaaab3d3958 rip 00002aaaab3d3958 rsp 00007fffffb3bdf8 error 15 [ 55.528975] pam_getenv[4287]: segfault at 00002aaaab3d3958 rip 00002aaaab3d3958 rsp 00007fffffcefa58 error 15 [ 56.275810] dpkg-statoverri[4617]: segfault at 00002aaaab3d3958 rip 00002aaaab3d3958 rsp 00007ffffffab5d8 error 15 [ 56.350670] ppdev: user-space parallel port driver [ 58.463968] NET: Registered protocol family 10 [ 58.464207] lo: Disabled Privacy Extensions [ 58.464532] IPv6 over IPv4 tunneling driver [ 69.338660] eth0: no IPv6 routers present [ 89.472637] apt-get[5044]: segfault at 0000000000000008 rip 00002aaaaaab73a8 rsp 00007fffffeec2c0 error 4 -- 6.06 64bit kernel totally broken after install, gcc3.3 fixes https://launchpad.net/bugs/51157 From rondom at rondom.de Thu Jul 6 19:54:30 2006 From: rondom at rondom.de (Andreas Gnau) Date: Thu, 06 Jul 2006 19:54:30 -0000 Subject: [Bug 51611] Re: ATI Radeon X300 not correctly recognized References: <20060702172641.17086.26128.malonedeb@gangotri.ubuntu.com> Message-ID: <20060706195430.11752.95952.malone@gangotri.ubuntu.com> I'm stupid, I know! I moved this bug to linux-source again. I accidentally hit the "also needs fixing here" -button. I don't know why. :oops: -- ATI Radeon X300 not correctly recognized https://launchpad.net/bugs/51611 From Lamego at PT-link.net Thu Jul 6 20:16:52 2006 From: Lamego at PT-link.net (=?utf-8?q?Jo=C3=A3o_Pinto?=) Date: Thu, 06 Jul 2006 20:16:52 -0000 Subject: [Bug 32504] Re: LCD Out of Range during graphical boot References: <20060222194110.15743.11424.malonedeb@gandwana.ubuntu.com> Message-ID: <20060706201652.18269.32741.malone@gandwana.ubuntu.com> I still had the problem after a fresh install of the final Dapper release. I have manually added vga=791 on the kernel options at /boot/grub/menu.lst to resolve the problem. -- LCD Out of Range during graphical boot https://launchpad.net/bugs/32504 From mdz at ubuntu.com Thu Jul 6 22:53:37 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Thu, 06 Jul 2006 22:53:37 -0000 Subject: [Bug 11671] Re: irq 11: nobody cared (try booting with the "irqpoll" option. References: <20060113132123.21012.7641.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060706225337.11752.96583.malone@gangotri.ubuntu.com> This bug is back in 2.6.17: [17347045.420000] irq 11: nobody cared (try booting with the "irqpoll" option) [17347045.420000] __report_bad_irq+0x24/0x80 note_interrupt+0x7f/0x230 [17347045.420000] sd_rw_intr+0x60/0x370 [sd_mod] handle_IRQ_event+0x33/0x60 [17347045.420000] __do_IRQ+0xf2/0x100 do_IRQ+0x19/0x30 [17347045.420000] common_interrupt+0x1a/0x20 __do_softirq+0x62/0xe0 [17347045.420000] do_softirq+0x35/0x40 do_IRQ+0x1e/0x30 [17347045.420000] common_interrupt+0x1a/0x20 default_idle+0x0/0x60 [17347045.420000] default_idle+0x2c/0x60 cpu_idle+0x71/0xb0 [17347045.420000] start_kernel+0x352/0x410 unknown_bootoption+0x0/0x250 [17347045.420000] handlers: [17347045.420000] [] (snd_via686_interrupt+0x0/0x100 [snd_via82xx]) [17347045.420000] Disabling IRQ #11 ** Also affects: linux-source-2.6.17 (Ubuntu) Importance: Untriaged Status: Unconfirmed ** Changed in: linux-source-2.6.17 (Ubuntu) Importance: Untriaged => Medium -- irq 11: nobody cared (try booting with the "irqpoll" option. https://launchpad.net/bugs/11671 From ben.collins at ubuntu.com Thu Jul 6 23:19:42 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Thu, 06 Jul 2006 23:19:42 -0000 Subject: [Bug 52108] Re: [Bug 52108] Re: Does not boot on laptops References: <20060706150855.11752.29087.malonedeb@gangotri.ubuntu.com> <20060706162020.18269.72555.malone@gandwana.ubuntu.com> Message-ID: <1152227982.11731.225.camel@grayson> I suspect that it just needs an extra amount of time to boot. Can you leave it for 3-5 minutes to see if it finishes booting with -25? -- Does not boot on laptops https://launchpad.net/bugs/52108 From ben.collins at ubuntu.com Thu Jul 6 23:15:31 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Thu, 06 Jul 2006 23:15:31 -0000 Subject: [Bug 33030] Re: [Bug 33030] Re: No SATA support for VIA VT8251 (e.g. on ASUS A8V MX) References: <20060227120715.16638.76305.malonedeb@gandwana.ubuntu.com> <20060706075818.16565.99790.malone@gandwana.ubuntu.com> Message-ID: <1152227732.11731.223.camel@grayson> On Thu, 2006-07-06 at 07:58 +0000, Albrecht Gebhardt wrote: > Please can someone change the status of this bug from "Fix released" to something other? The fix that had been released (somewhere in march as 2.6.15-19.28) stopped working before final dapper release (somewhere at 2.6.15-21.XX). > > Instead a new fix is needed, which I posted two messages above in the comment history of this bug. Why not just edit /etc/fstab and /boot/grub/menu.lst to reflect the proper drive mappings? The patch that you want me to remove would keep some people from even using dapper. The worst problem you are having is that you are going from hda to sda, right? And this resolves itself by taking 3 minutes to boot because of it, but can be resolved easily by editing a few files. -- No SATA support for VIA VT8251 (e.g. on ASUS A8V MX) https://launchpad.net/bugs/33030 From ben.collins at ubuntu.com Thu Jul 6 23:25:35 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Thu, 06 Jul 2006 23:25:35 -0000 Subject: [Bug 51157] Re: 6.06 64bit kernel totally broken after install, gcc3.3 fixes References: <20060627232049.17086.52183.malonedeb@gangotri.ubuntu.com> Message-ID: <20060706232535.18269.91897.malone@gandwana.ubuntu.com> Crazy. I now have a Supermicro with dual Xeon (Core2 Duo) 3ghz cpu's as well. I installed dapper on it, rebooted and everything is working perfectly. The only problem I had is that the ATI X driver is crashing on me. What filesystem are you using for your rootfs? -- 6.06 64bit kernel totally broken after install, gcc3.3 fixes https://launchpad.net/bugs/51157 From cbond at umci.com Thu Jul 6 23:48:56 2006 From: cbond at umci.com (KnottyMan) Date: Thu, 06 Jul 2006 23:48:56 -0000 Subject: [Bug 51157] Re: 6.06 64bit kernel totally broken after install, gcc3.3 fixes References: <20060627232049.17086.52183.malonedeb@gangotri.ubuntu.com> Message-ID: <20060706234856.18493.82898.malone@gandwana.ubuntu.com> reiserfs v3. I can try ext3. Considering though that everything works ok afterwards with a new kernel, I don't think that's it. Feels like compiler optimizations in gcc >= 3.4. Once I booted the recompiled vanilla kernel, X works fine using vesa? but since this is a samba server, I have gdm turned off. I don't know what it is about these systems (I have two) but there always seems to be something funky with these "engineered" systems. I can run Dapper on my AMD 3500's with MSI motherboards just fine and never think about them having a fit. Hoary RC1 *would not* play nice on the Supermicros. Waited 2 days for official 5.04 to come out and everything was fixed. I think it was something with the Serverworks chipset if I had to guess. And now this rot. Sigh. -- 6.06 64bit kernel totally broken after install, gcc3.3 fixes https://launchpad.net/bugs/51157 From ben.collins at ubuntu.com Fri Jul 7 00:12:01 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Fri, 07 Jul 2006 00:12:01 -0000 Subject: [Bug 51157] Re: [Bug 51157] Re: 6.06 64bit kernel totally broken after install, gcc3.3 fixes References: <20060627232049.17086.52183.malonedeb@gangotri.ubuntu.com> <20060706234856.18493.82898.malone@gandwana.ubuntu.com> Message-ID: <1152231121.11731.231.camel@grayson> On Thu, 2006-07-06 at 23:48 +0000, KnottyMan wrote: > reiserfs v3. I can try ext3. Considering though that everything works > ok afterwards with a new kernel, I don't think that's it. Feels like > compiler optimizations in gcc >= 3.4. > > Once I booted the recompiled vanilla kernel, X works fine using vesa? > but since this is a samba server, I have gdm turned off. > > I don't know what it is about these systems (I have two) but there > always seems to be something funky with these "engineered" systems. I > can run Dapper on my AMD 3500's with MSI motherboards just fine and > never think about them having a fit. Hoary RC1 *would not* play nice on > the Supermicros. Waited 2 days for official 5.04 to come out and > everything was fixed. I think it was something with the Serverworks > chipset if I had to guess. And now this rot. Sigh. Please try out ext3. As of right now, that's the only real difference between out systems. -- 6.06 64bit kernel totally broken after install, gcc3.3 fixes https://launchpad.net/bugs/51157 From rtg at aapsc.com Fri Jul 7 04:35:06 2006 From: rtg at aapsc.com (Richard Green) Date: Fri, 07 Jul 2006 04:35:06 -0000 Subject: [Bug 24533] Re: Fail to boot smp kernel References: <20060113142932.21012.10689.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060707043506.27312.4785.malone@gangotri.ubuntu.com> Verified again with kernel 2.6.15-25-686 -- Fail to boot smp kernel https://launchpad.net/bugs/24533 From bugwatch at bugs.launchpad.net Fri Jul 7 04:52:22 2006 From: bugwatch at bugs.launchpad.net (Bug Watch Updater) Date: Fri, 07 Jul 2006 04:52:22 -0000 Subject: [Bug 34831] Re: Hardlock of entire system (Dapper Flight 5) References: <20060314003317.30057.9117.malonedeb@gandwana.ubuntu.com> Message-ID: <20060707045227.26292.8414.launchpad@gangotri.ubuntu.com> ** Changed in: alsa-driver (Debian) Status: Unconfirmed => Fix Released -- Hardlock of entire system (Dapper Flight 5) https://launchpad.net/bugs/34831 From albrecht.gebhardt at uni-klu.ac.at Fri Jul 7 06:10:23 2006 From: albrecht.gebhardt at uni-klu.ac.at (Albrecht Gebhardt) Date: Fri, 07 Jul 2006 06:10:23 -0000 Subject: [Bug 33030] Re: [Bug 33030] Re: [Bug 33030] Re: No SATA support for VIA VT8251 (e.g. on ASUS A8V MX) References: <20060227120715.16638.76305.malonedeb@gandwana.ubuntu.com> <20060706075818.16565.99790.malone@gandwana.ubuntu.com> <1152227732.11731.223.camel@grayson> Message-ID: <1152252623.6999.8.camel@localhost> Am Donnerstag, den 06.07.2006, 23:15 +0000 schrieb Ben Collins: > On Thu, 2006-07-06 at 07:58 +0000, Albrecht Gebhardt wrote: > > Please can someone change the status of this bug from "Fix released" to something other? The fix that had been released (somewhere in march as 2.6.15-19.28) stopped working before final dapper release (somewhere at 2.6.15-21.XX). > > > > Instead a new fix is needed, which I posted two messages above in the comment history of this bug. > > Why not just edit /etc/fstab and /boot/grub/menu.lst to reflect the > proper drive mappings? ??? what do you mean here? > > The patch that you want me to remove would keep some people from even > using dapper. The worst problem you are having is that you are going > from hda to sda, right? no, SATA disks attached to a VT8251 are not beeing detected at all (scsi timeout from libata) because the VIA code in ahci.c stopped working with some backported libata stuff. Instead now sata_via.c works for VT8251, but only without the presence of the VIA modifications in ahci.c I think you mixed this with some other bug ;-) ? Albrecht > And this resolves itself by taking 3 minutes to > boot because of it, but can be resolved easily by editing a few files. > -- No SATA support for VIA VT8251 (e.g. on ASUS A8V MX) https://launchpad.net/bugs/33030 From vanderson at mandriva.com Fri Jul 7 07:25:40 2006 From: vanderson at mandriva.com (vanderson.gold) Date: Fri, 07 Jul 2006 07:25:40 -0000 Subject: [Bug 52145] kernel freezes when binding bluetooth rfcomm on Ubuntu 5.10 References: <20060706201159.18493.88795.malonedeb@gandwana.ubuntu.com> Message-ID: <20060707072540.19629.56621.launchpad@canonical@gandwana.ubuntu.com> Public bug reported: The kernel freezes (due to an Oops) when disconnecting and immediately reconnecting a bluetooth RFCOMM device. It's due to a race condition, already fixed in versions 2.6.13 and above. The patch below, from Marcell Holtmann (maintainer of the BT stack) should be enough to fix this bug: From: http://www.kernel.org/git/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commitdiff;h=dcc365d8f28d6a2332fa37e64d669858a8d017e8 {{{ [Bluetooth] Revert session reference counting fix The fix for the reference counting problem of the signal DLC introduced a race condition which leads to an oops. The reason for it is not fully understood by now and so revert this fix, because the reference counting problem is not crashing the RFCOMM layer and its appearance it rare. Signed-off-by: Marcel Holtmann }}} How to reproduce it: * Just running rfcomm bind / rfcomm release should trigger the bug, but since it's a racing condition, you mileage may vary. The steps below should be sufficient to reproduce it: {{{ 1. remove any cache from application who detects bluetooth devices (ex:some-bt-app) 2. /etc/init.d/bluez-utils start 3. run some bluetoooth application which uses rfcomm ports 4. do needed stuff to establish bluetooth connection (ex: check if /dev/rfcomm* are ok) 5. stop your bluetooth application 6. /etc/init.d/bluez-utils stop 7. wait a few seconds 8. Oops, completely freezing the machine }}} Just a few seconds later the machine freezes with an oops. This was originally reported on the Mandriva bugzilla: http://qa.mandriva.com/show_bug.cgi?id=22566. They've fixed the problem applying the aforementioned patch, including the fix on the next kernel update of MDV2006. Any chances we can have this fixed on one of the next kernel official updates for Ubuntu 5.10? ** Affects: linux-source-2.6.12 (Ubuntu) Importance: Untriaged Status: Unconfirmed -- kernel freezes when binding bluetooth rfcomm on Ubuntu 5.10 https://launchpad.net/bugs/52145 From martin.pitt at ubuntu.com Fri Jul 7 07:26:40 2006 From: martin.pitt at ubuntu.com (Martin Pitt) Date: Fri, 07 Jul 2006 07:26:40 -0000 Subject: [Bug 52145] Re: kernel freezes when binding bluetooth rfcomm on Ubuntu 5.10 References: <20060706201159.18493.88795.malonedeb@gandwana.ubuntu.com> Message-ID: <20060707072640.19629.55198.malone@gandwana.ubuntu.com> Thank you! This looks appropriate for the next kernel security update (unfortunately the current one is already pending publication). ** Changed in: Ubuntu Sourcepackagename: None => linux-source-2.6.12 ** Changed in: linux-source-2.6.12 (Ubuntu) Status: Unconfirmed => Confirmed -- kernel freezes when binding bluetooth rfcomm on Ubuntu 5.10 https://launchpad.net/bugs/52145 From aelmahmoudy at users.sourceforge.net Fri Jul 7 09:20:54 2006 From: aelmahmoudy at users.sourceforge.net (Ahmed El-Mahmoudy) Date: Fri, 07 Jul 2006 09:20:54 -0000 Subject: [Bug 52108] Re: Does not boot on laptops References: <20060706150855.11752.29087.malonedeb@gangotri.ubuntu.com> Message-ID: <20060707092054.27312.14203.malone@gangotri.ubuntu.com> I tried again to boot using that image and I noted the following: 1. The laptop does boot but after few minutes. 2. The delay is during the "Loading essential drivers" stage, I pressed Alt+F1 to see what's going on, and I found this message repeating: udevplug[994]: make_queue: unable to create /dev/.udev/queue: No such file or directory This goes on for a few minutes and then linux boots. 3. I tried to reboot again after that successful (yet delayed) boot and I noticed that sometimes that delay happens and sometimes it does not. Cannot figure out the reason though. -- Does not boot on laptops https://launchpad.net/bugs/52108 From ubuntu-info at internode.com.au Fri Jul 7 14:13:58 2006 From: ubuntu-info at internode.com.au (ubuntu guy) Date: Fri, 07 Jul 2006 14:13:58 -0000 Subject: [Bug 52234] sparc64 netboot image missing cassini network driver References: <20060707135845.19447.41473.malonedeb@gandwana.ubuntu.com> Message-ID: <20060707141358.27257.27432.launchpad@canonical@gangotri.ubuntu.com> Public bug reported: Trying to install ubuntu on a b100s sparc blade for which netboot is the only option fails because the cassini network driver is not enabled in the kernel. This driver was added somewhere around 2.6.13 or 2.6.14. Device Drivers -> Network device support -> Ethernet (10 or 100Mbit) -> Sun Cassini support ** Affects: linux-source-2.6.15 (Ubuntu) Importance: Untriaged Assignee: Ben Collins Status: Fix Committed -- sparc64 netboot image missing cassini network driver https://launchpad.net/bugs/52234 From fabbione at ubuntu.com Fri Jul 7 14:13:57 2006 From: fabbione at ubuntu.com (Fabio Massimo Di Nitto) Date: Fri, 07 Jul 2006 14:13:57 -0000 Subject: [Bug 52234] Re: sparc64 netboot image missing cassini network driver References: <20060707135845.19447.41473.malonedeb@gandwana.ubuntu.com> Message-ID: <20060707141358.27257.94586.malone@gangotri.ubuntu.com> Hi Ben, we are missing the cassini.ko driver from d-i. If you can pull from .15 branch on people, the fix is already committed. Fabio ** Changed in: Ubuntu Sourcepackagename: None => linux-source-2.6.15 Assignee: (unassigned) => Ben Collins Status: Unconfirmed => Fix Committed -- sparc64 netboot image missing cassini network driver https://launchpad.net/bugs/52234 From ben.collins at ubuntu.com Fri Jul 7 16:12:52 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Fri, 07 Jul 2006 16:12:52 -0000 Subject: [Bug 52145] Re: kernel freezes when binding bluetooth rfcomm on Ubuntu 5.10 References: <20060706201159.18493.88795.malonedeb@gandwana.ubuntu.com> Message-ID: <20060707161252.27257.91011.launchpad@gangotri.ubuntu.com> ** Changed in: linux-source-2.6.12 (Ubuntu) Assignee: (unassigned) => ChuckShort -- kernel freezes when binding bluetooth rfcomm on Ubuntu 5.10 https://launchpad.net/bugs/52145 From ben.collins at ubuntu.com Fri Jul 7 16:12:35 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Fri, 07 Jul 2006 16:12:35 -0000 Subject: [Bug 33030] Re: No SATA support for VIA VT8251 (e.g. on ASUS A8V MX) References: <20060227120715.16638.76305.malonedeb@gandwana.ubuntu.com> Message-ID: <20060707161236.27257.84574.malone@gangotri.ubuntu.com> Then can't you blacklist ahci so that sata_via gets used? -- No SATA support for VIA VT8251 (e.g. on ASUS A8V MX) https://launchpad.net/bugs/33030 From kranidiotis at vatica.org Fri Jul 7 16:27:31 2006 From: kranidiotis at vatica.org (Panagiotis Kranidiotis) Date: Fri, 07 Jul 2006 16:27:31 -0000 Subject: [Bug 52255] After kernel-image installation kernel panic and no grub updated References: <20060707162731.19447.34300.malonedeb@gandwana.ubuntu.com> Message-ID: <20060707162731.19447.34300.malonedeb@gandwana.ubuntu.com> Public bug reported: Binary package hint: linux-image-2.6-686 The reason is that in the postinst script in the package many lines are missing. The script is wrong ** Affects: linux-meta (Ubuntu) Importance: Untriaged Status: Unconfirmed -- After kernel-image installation kernel panic and no grub updated https://launchpad.net/bugs/52255 From ben.collins at ubuntu.com Fri Jul 7 16:32:20 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Fri, 07 Jul 2006 16:32:20 -0000 Subject: [Bug 33030] Re: No SATA support for VIA VT8251 (e.g. on ASUS A8V MX) References: <20060227120715.16638.76305.malonedeb@gandwana.ubuntu.com> Message-ID: <20060707163220.19447.63511.malone@gandwana.ubuntu.com> Ok, I've incorporated your patches for the 2.6.15-26.44 upload today. This is hopefully the kernel that will be used on the first point release (new CD's), so anyone that needs to test this, please do so as quickly as possible. New kernels should be available on dapper-security within a few days. -- No SATA support for VIA VT8251 (e.g. on ASUS A8V MX) https://launchpad.net/bugs/33030 From alexsfbay at yahoo.com Fri Jul 7 16:37:27 2006 From: alexsfbay at yahoo.com (Alexander Grundner) Date: Fri, 07 Jul 2006 16:37:27 -0000 Subject: [Bug 50323] Re: system freezes after last kernel update References: <20060619110659.20041.85554.malonedeb@gangotri.ubuntu.com> Message-ID: <20060707163727.19629.43205.malone@gandwana.ubuntu.com> I've been experiencing the same problem with linux-image-2.6.15-25-686. After I upgraded from 386 to 686 with linux-686-smp I've been having system freezes when browsing the web with firefox. It doesn't happen all the time, but it does happen randomly. And, yes, the only thing I can do to get things working again is doing a hard reboot :( * Using Intel P4 3.0Ghz HT * Problem also is occuring with the standard "nv" drivers -- system freezes after last kernel update https://launchpad.net/bugs/50323 From ben.collins at ubuntu.com Fri Jul 7 17:07:48 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Fri, 07 Jul 2006 17:07:48 -0000 Subject: [Bug 52255] Re: After kernel-image installation kernel panic and no grub updated References: <20060707162731.19447.34300.malonedeb@gandwana.ubuntu.com> Message-ID: <20060707170748.19447.7024.malone@gandwana.ubuntu.com> This was a bug in kernel-package (which creates the linux-image packages). I've fixed it, and the next kernel upload will have correct post/pre install/remove scripts. ** Changed in: linux-meta (Ubuntu) Sourcepackagename: linux-meta => kernel-package Assignee: (unassigned) => Ben Collins Status: Unconfirmed => Fix Committed -- After kernel-image installation kernel panic and no grub updated https://launchpad.net/bugs/52255 From dcavar at mac.com Fri Jul 7 17:25:52 2006 From: dcavar at mac.com (DC) Date: Fri, 07 Jul 2006 17:25:52 -0000 Subject: [Bug 35197] Re: powerbook fails to suspend when the is lid closed References: <20060316142811.6510.81484.malonedeb@gangotri.ubuntu.com> Message-ID: <20060707172552.19629.3273.malone@gandwana.ubuntu.com> With GNOME it fails for me too, with KDE it works. I can't believe it has something to do with a bug in the kernel or some driver, or does it? On the GNOME pages are some comments about Ubuntu and the suspend feature: http://www.gnome.org/projects/gnome-power-manager/faq.html however, with libpam-foreground installed nothing changes. Well, it should work somehow, it works perfectly with KDE, any new insights? DC -- powerbook fails to suspend when the is lid closed https://launchpad.net/bugs/35197 From dcavar at mac.com Fri Jul 7 17:37:54 2006 From: dcavar at mac.com (DC) Date: Fri, 07 Jul 2006 17:37:54 -0000 Subject: [Bug 35197] Re: powerbook fails to suspend when the is lid closed References: <20060316142811.6510.81484.malonedeb@gangotri.ubuntu.com> Message-ID: <20060707173754.27312.16949.malone@gangotri.ubuntu.com> With GNOME it fails for me too, with KDE it works. I can't believe it has something to do with a bug in the kernel or some driver, or does it? On the GNOME pages are some comments about Ubuntu and the suspend feature: http://www.gnome.org/projects/gnome-power-manager/faq.html however, with libpam-foreground installed nothing changes. Well, it should work somehow, it works perfectly with KDE, any new insights? DC -- powerbook fails to suspend when the is lid closed https://launchpad.net/bugs/35197 From jesper at krogh.cc Fri Jul 7 18:04:39 2006 From: jesper at krogh.cc (Jesper Krogh) Date: Fri, 07 Jul 2006 18:04:39 -0000 Subject: [Bug 52260] Kernel does not detect all luns. References: <20060707180439.27312.28443.malonedeb@gangotri.ubuntu.com> Message-ID: <20060707180439.27312.28443.malonedeb@gangotri.ubuntu.com> Public bug reported: Binary package hint: linux-amd64-server Using an Adaptec SCSI controller on a external raid disk, that supplies 2 luns on same SCSI-id, Ubuntu does not automatically detect the second lun. Running the command: echo "scsi add-single-device 1 0 0 1" > /proc/scsi/scsi brings the device back up. This seems to be related to the aic7xxx scsi-driver since the qlogic ql2300 driver works in a similar setup. According to this: http://publib.boulder.ibm.com/infocenter/dsichelp/ds8000ic/index.jsp?topic=/com.ibm.storage.ssic.help.doc/f2c_linuxlunconfig_2hsaga.html putting "max_luns=128" in modules.conf should help, but that doesnt change the situation for ubuntu. ** Affects: linux-meta (Ubuntu) Importance: Untriaged Status: Unconfirmed -- Kernel does not detect all luns. https://launchpad.net/bugs/52260 From ben.collins at ubuntu.com Fri Jul 7 18:53:13 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Fri, 07 Jul 2006 18:53:13 -0000 Subject: [Bug 52260] Re: Kernel does not detect all luns. References: <20060707180439.27312.28443.malonedeb@gangotri.ubuntu.com> Message-ID: <20060707185313.27312.12291.malone@gangotri.ubuntu.com> Actually, you'll need to create a file, for example: /etc/modprobe.d/aic7xxx And put this in it: options aic7xxx max_luns=128 ** Changed in: linux-meta (Ubuntu) Sourcepackagename: linux-meta => linux-source-2.6.15 Status: Unconfirmed => Rejected -- Kernel does not detect all luns. https://launchpad.net/bugs/52260 From ben.collins at ubuntu.com Fri Jul 7 19:10:42 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Fri, 07 Jul 2006 19:10:42 -0000 Subject: [Bug 52260] Re: [Bug 52260] Re: Kernel does not detect all luns. References: <20060707180439.27312.28443.malonedeb@gangotri.ubuntu.com> <20060707185313.27312.12291.malone@gangotri.ubuntu.com> Message-ID: <1152299443.11731.338.camel@grayson> On Fri, 2006-07-07 at 18:53 +0000, Ben Collins wrote: > Actually, you'll need to create a file, for example: > > /etc/modprobe.d/aic7xxx > > And put this in it: > > options aic7xxx max_luns=128 You'll also need to recreate your initramfs, like this: sudo dpkg-reconfigure linux-image-`uname -r` -- Kernel does not detect all luns. https://launchpad.net/bugs/52260 From emschwar at ericschwartz.us Fri Jul 7 20:09:06 2006 From: emschwar at ericschwartz.us (Eric Schwartz) Date: Fri, 07 Jul 2006 20:09:06 -0000 Subject: [Bug 51465] Re: ACPI suspend/hibernate doesn't work anymore References: <20060630210004.17054.3414.malonedeb@gangotri.ubuntu.com> Message-ID: <20060707200906.27257.32214.malone@gangotri.ubuntu.com> Er, it's a regression *FROM* Breezy. It's a regression *FOR* Dapper. Sorry about that. -- ACPI suspend/hibernate doesn't work anymore https://launchpad.net/bugs/51465 From albrecht.gebhardt at uni-klu.ac.at Fri Jul 7 20:06:41 2006 From: albrecht.gebhardt at uni-klu.ac.at (Albrecht Gebhardt) Date: Fri, 07 Jul 2006 20:06:41 -0000 Subject: [Bug 33030] Re: [Bug 33030] Re: No SATA support for VIA VT8251 (e.g. on ASUS A8V MX) References: <20060227120715.16638.76305.malonedeb@gandwana.ubuntu.com> <20060707161236.27257.84574.malone@gangotri.ubuntu.com> Message-ID: <1152302801.7883.1.camel@localhost> Am Freitag, den 07.07.2006, 16:12 +0000 schrieb Ben Collins: > Then can't you blacklist ahci so that sata_via gets used? but sata_via also needs a patch to recognize VT8251. Albrecht > -- No SATA support for VIA VT8251 (e.g. on ASUS A8V MX) https://launchpad.net/bugs/33030 From cbond at umci.com Fri Jul 7 21:48:50 2006 From: cbond at umci.com (KnottyMan) Date: Fri, 07 Jul 2006 21:48:50 -0000 Subject: [Bug 51157] Re: 6.06 64bit kernel totally broken after install, gcc3.3 fixes References: <20060627232049.17086.52183.malonedeb@gangotri.ubuntu.com> Message-ID: <20060707214850.27257.46991.malone@gangotri.ubuntu.com> Reinstalled with ext3 for root. Same behavior. I have the Nocona Xeons, not the Duos. -- 6.06 64bit kernel totally broken after install, gcc3.3 fixes https://launchpad.net/bugs/51157 From ben.collins at ubuntu.com Fri Jul 7 22:06:13 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Fri, 07 Jul 2006 22:06:13 -0000 Subject: [Bug 51465] Re: ACPI suspend/hibernate doesn't work anymore References: <20060630210004.17054.3414.malonedeb@gangotri.ubuntu.com> Message-ID: <20060707220613.27257.17172.malone@gangotri.ubuntu.com> Please confirm which version of linux-image you are using by doing: dpkg -l | grep linux-image Thanks ** Changed in: linux-meta (Ubuntu) Sourcepackagename: linux-meta => linux-source-2.6.15 -- ACPI suspend/hibernate doesn't work anymore https://launchpad.net/bugs/51465 From albrecht.gebhardt at uni-klu.ac.at Fri Jul 7 22:06:04 2006 From: albrecht.gebhardt at uni-klu.ac.at (Albrecht Gebhardt) Date: Fri, 07 Jul 2006 22:06:04 -0000 Subject: [Bug 33030] RE: [Bug 33030] Re: No SATA support for VIA VT8251 (e.g. on ASUS A8V MX) References: <20060227120715.16638.76305.malonedeb@gandwana.ubuntu.com> Message-ID: <20060707220559.CD3913766D5@mailsrv.uni-klu.ac.at> Thanks, I will try as soon as possible. Albrecht ----- Ursprüngliche Nachricht ----- >Von: "Ben Collins" >Gesendet: 07.07.06 18:32:20 >An: "albrecht.gebhardt at uni-klu.ac.at" >Betreff: [Bug 33030] Re: No SATA support for VIA VT8251 (e.g. on ASUS A8V MX) > >Ok, I've incorporated your patches for the 2.6.15-26.44 upload today. >This is hopefully the kernel that will be used on the first point >release (new CD's), so anyone that needs to test this, please do so as >quickly as possible. > >New kernels should be available on dapper-security within a few days. > >-- >No SATA support for VIA VT8251 (e.g. on ASUS A8V MX) >https://launchpad.net/bugs/33030 -- No SATA support for VIA VT8251 (e.g. on ASUS A8V MX) https://launchpad.net/bugs/33030 From ben.collins at ubuntu.com Fri Jul 7 22:47:54 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Fri, 07 Jul 2006 22:47:54 -0000 Subject: [Bug 51157] Re: [Bug 51157] Re: 6.06 64bit kernel totally broken after install, gcc3.3 fixes References: <20060627232049.17086.52183.malonedeb@gangotri.ubuntu.com> <20060707214850.27257.46991.malone@gangotri.ubuntu.com> Message-ID: <1152312474.11731.355.camel@grayson> On Fri, 2006-07-07 at 21:48 +0000, KnottyMan wrote: > Reinstalled with ext3 for root. Same behavior. I have the Nocona > Xeons, not the Duos. So you recompiled our kernel (the Ubuntu 2.6.15 git tree) with gcc-3.3 and it fixed this issue? -- 6.06 64bit kernel totally broken after install, gcc3.3 fixes https://launchpad.net/bugs/51157 From cbond at umci.com Fri Jul 7 23:19:21 2006 From: cbond at umci.com (KnottyMan) Date: Fri, 07 Jul 2006 23:19:21 -0000 Subject: [Bug 51157] Re: 6.06 64bit kernel totally broken after install, gcc3.3 fixes References: <20060627232049.17086.52183.malonedeb@gangotri.ubuntu.com> Message-ID: <20060707231921.19447.14448.malone@gandwana.ubuntu.com> Using a kernel from the other supermicro server (Hoary 2.6.10) to boot from, I was then able to apt and compile from the vanilla source tree (patched with mm3 to get Areca support) a 2.6.17 kernel that works fine. I had to use gcc 3.3. Same source with 3.4 would not work. Ubuntu 2.6.15-7 source did not get me a bootable kernel, but I don't recall if I compiled with 4.0, 3.4 or 3.3. I have installled this box numerous times and numerous variants unfortunately. Recompiling the booted 2.6.10 kernel from source did not recompile nicely. This makes me think that it's a gcc >= 3.4 problem. I yanked the whole source tree from the working Hoary box and tried to recompile it with no changes to the config since I know that it will compile on Hoary/3.3. I'll try ubuntu source package compile with 3.3 on Monday 7/10. It's currently doing a drbd sync of 2Tb... : ) -- 6.06 64bit kernel totally broken after install, gcc3.3 fixes https://launchpad.net/bugs/51157 From murphyf at f-m.fm Sat Jul 8 00:51:46 2006 From: murphyf at f-m.fm (Frank Murphy) Date: Sat, 08 Jul 2006 00:51:46 -0000 Subject: [Bug 52284] Battery reporting only works after switching to an external monitor during Grub References: <20060708005146.27257.50167.malonedeb@gangotri.ubuntu.com> Message-ID: <20060708005146.27257.50167.malonedeb@gangotri.ubuntu.com> Public bug reported: Binary package hint: linux-image-2.6.15-25-686 Really. I have a Toshiba Satellite M25XS149 and it seems to me that the battery detection worked great in Breezy, but I don't totally remember. But for a few months it hasn't worked. I discovered that it would work if I tried to switch the monitor output to an external screen (with fn+F5) during the grub screen. With a TV attached to the S-Video or with no screen attached, the /proc/acpi/battery/BAT1/* have contents. (And seem to work great.) If I don't do this, it seems that the battery is detected, and if I check right away, even found. But after the first file access, it doesn't work any more. I tried adding ec_burst=1 to the menu.lst, to no avail. I'll attache the relevant dmesg output soon. ** Affects: linux-source-2.6.15 (Ubuntu) Importance: Untriaged Status: Unconfirmed ** Attachment added: "dmesg output when the battery only can be accessed once" http://librarian.launchpad.net/3299328/broken.dmesg ** Attachment added: "Output from cat /proc/acpi/battery/BAT1/*" http://librarian.launchpad.net/3299333/broken.proc-bat1 ** Attachment added: "Here's the out put from the same cat. And it reports no battery present!" http://librarian.launchpad.net/3299339/broken.proc-bat2 ** Attachment added: "dmesg output when the battery accessed works" http://librarian.launchpad.net/3299349/works.dmesg ** Attachment added: "cat /proc/acpi/battery/BAT1/*" http://librarian.launchpad.net/3299355/works.proc-bat1 ** Attachment added: "cat /proc/acpi/battery/BAT1/*" http://librarian.launchpad.net/3299358/works.proc-bat2 -- Battery reporting only works after switching to an external monitor during Grub https://launchpad.net/bugs/52284 From murphyf at f-m.fm Sat Jul 8 00:58:54 2006 From: murphyf at f-m.fm (Frank Murphy) Date: Sat, 08 Jul 2006 00:58:54 -0000 Subject: [Bug 52284] Re: Battery reporting only works after switching to an external monitor during Grub References: <20060708005146.27257.50167.malonedeb@gangotri.ubuntu.com> Message-ID: <20060708005854.27312.64298.malone@gangotri.ubuntu.com> Sorry, typo. It's a Toshiba Satellite M35X-S149 -- Battery reporting only works after switching to an external monitor during Grub https://launchpad.net/bugs/52284 From infyquest at gmail.com Sat Jul 8 06:36:21 2006 From: infyquest at gmail.com (Vijay Kiran Kamuju) Date: Sat, 08 Jul 2006 06:36:21 -0000 Subject: [Bug 52302] Intel Pro Wireless 3945 is not detected with latest kernel update References: <20060708063621.27257.43382.malonedeb@gangotri.ubuntu.com> Message-ID: <20060708063621.27257.43382.malonedeb@gangotri.ubuntu.com> Public bug reported: Binary package hint: linux-image-2.6-386 Hi, I am have installed KUbuntu Dapper Drake on my laptop DELL E1705. With the linux-image (kernel) version present in after installation allows me to connect to Internet through my WLAN card. After that I installed all the updates using adept and logged in with the new linux-image. Now I am unable to connect to internet as my card is not being detected. Please send me a fix or upload the fix somewhere Thanks, VJ ** Affects: linux-meta (Ubuntu) Importance: Untriaged Status: Unconfirmed -- Intel Pro Wireless 3945 is not detected with latest kernel update https://launchpad.net/bugs/52302 From robitaille at gmail.com Sat Jul 8 07:16:25 2006 From: robitaille at gmail.com (Daniel Robitaille) Date: Sat, 08 Jul 2006 07:16:25 -0000 Subject: [Bug 52304] annoying CONFIG_BLK_DEV_IDE_PMAC_BLINK default References: <20060708071625.19447.46681.malonedeb@gandwana.ubuntu.com> Message-ID: <20060708071625.19447.46681.malonedeb@gandwana.ubuntu.com> Public bug reported: Binary package hint: linux-image-powerpc initially sent to the ubuntu-users mailing list when reported by the user using reportbug ---------- Forwarded message ---------- From: Gian-Luca Dei Rossi To: Ubuntu Bug Tracking System Date: Sat, 08 Jul 2006 02:04:44 +0200 Subject: linux-image-powerpc: annoying CONFIG_BLK_DEV_IDE_PMAC_BLINK default Package: linux-image-powerpc Version: 2.6.17.2 Severity: wishlist In edgy's ppc kernel package, CONFIG_BLK_DEV_IDE_PMAC_BLINK is set to Y by default. This option makes the sleep led of apple ibook/powerbook blinking with hard disk activity. This option is rather annoying (try to use your ibook in darkness, and see yourself glowing) and blinking with ide events is NOT the expected behaviour for that led. I wish you could revert the default setting for that option to N. Thanks. -- System Information: Debian Release: testing/unstable APT prefers edgy-updates APT policy: (500, 'edgy-updates'), (500, 'edgy-security'), (500, 'edgy-proposed'), (500, 'edgy-backports'), (500, 'edgy') Architecture: powerpc (ppc) Shell: /bin/sh linked to /bin/dash Kernel: Linux 2.6.17-4-powerpc Locale: LANG=it_IT.utf8, LC_CTYPE=it_IT.utf8 (charmap=UTF-8) Versions of packages linux-image-powerpc depends on: ii linux-image-2.6.17-4-powerpc 2.6.17-4.6 Linux kernel image for version 2.6 linux-image-powerpc recommends no packages. -- no debconf information ** Affects: linux-meta (Ubuntu) Importance: Untriaged Status: Unconfirmed -- annoying CONFIG_BLK_DEV_IDE_PMAC_BLINK default https://launchpad.net/bugs/52304 From setthiry at hotmail.com Sat Jul 8 09:03:26 2006 From: setthiry at hotmail.com (insyzygy) Date: Sat, 08 Jul 2006 09:03:26 -0000 Subject: [Bug 34752] Re: [atmel] breezy->dapper wifi lost: signal power to 0 References: <20060313122743.17044.67675.malonedeb@gangotri.ubuntu.com> Message-ID: <20060708090326.19447.1392.malone@gandwana.ubuntu.com> I thought I would report something regarding this. I had the same issue as the orignal bug report, I could scan but not connect. Based on this thread I compiled a 2.6.17 kernel (vanila from kernel.org ) and used the edgy firmware and now the card works fine. -- [atmel] breezy->dapper wifi lost: signal power to 0 https://launchpad.net/bugs/34752 From dcavar at mac.com Sat Jul 8 09:29:13 2006 From: dcavar at mac.com (DC) Date: Sat, 08 Jul 2006 09:29:13 -0000 Subject: [Bug 35197] Re: powerbook fails to suspend when the is lid closed References: <20060316142811.6510.81484.malonedeb@gangotri.ubuntu.com> Message-ID: <20060708092913.19629.93358.malone@gandwana.ubuntu.com> Suspend worked on the login window of GDM, it worked perfectly with KDE, so, we just kill the gnome-powermanager, and surprise, surprise, it suspends perfectly well when the lid is closed. So, just remove it from your session and everything should be OK, never reboot or restart again... or, well, not that often anymore... :-) DC -- powerbook fails to suspend when the is lid closed https://launchpad.net/bugs/35197 From gerv at gerv.net Sat Jul 8 10:07:16 2006 From: gerv at gerv.net (Gerv) Date: Sat, 08 Jul 2006 10:07:16 -0000 Subject: [Bug 39518] Re: kernel oops in usbserial on ppc with appletouch loaded (palm hotsync attempt) References: <20060414013959.1684.83034.malonedeb@gangotri.ubuntu.com> Message-ID: <20060708100716.19447.38679.malone@gandwana.ubuntu.com> Ben: is there a plan for getting Palm USB syncing working in Dapper? (I assume it has to be made to work at some point, otherwise people with such devices are going to be out of luck for the next five years...) Is there a plan to rev. the kernel? Or to figure out the problem and backport a patch? Is there anything any of us can do to speed up the fix? Gerv -- kernel oops in usbserial on ppc with appletouch loaded (palm hotsync attempt) https://launchpad.net/bugs/39518 From frogzoo at chilli.net.au Sat Jul 8 11:59:26 2006 From: frogzoo at chilli.net.au (frogzoo) Date: Sat, 08 Jul 2006 11:59:26 -0000 Subject: [Bug 6627] Re: lexmark z53 blank pages References: <20060110202826.5372.9972.malonedeb@gangotri.ubuntu.com> Message-ID: <20060708115926.19629.72617.malone@gandwana.ubuntu.com> After today's updates, my Z52 works fine. Great work! -- lexmark z53 blank pages https://launchpad.net/bugs/6627 From b.schliessmann at web.de Sat Jul 8 12:10:23 2006 From: b.schliessmann at web.de (=?utf-8?q?Bj=C3=B6rn_Schlie=C3=9Fmann?=) Date: Sat, 08 Jul 2006 12:10:23 -0000 Subject: [Bug 52323] Unusual shutdown problem References: <20060708121023.19447.34119.malonedeb@gandwana.ubuntu.com> Message-ID: <20060708121023.19447.34119.malonedeb@gandwana.ubuntu.com> Public bug reported: Binary package hint: linux-image-2.6.15-25-k7 I've got the following shutdown problem: Shutting down works, but only "delayed". Before switching off, there is a short delay and I hear how the hard disk shuts down, starts up again, shuts down and then the computer is turned off. How can I track down the problem? (it also exists with linux-image-2.6.15-23-k7) ** Affects: linux-source-2.6.15 (Ubuntu) Importance: Untriaged Status: Unconfirmed -- Unusual shutdown problem https://launchpad.net/bugs/52323 From ivoks at ubuntu.com Sat Jul 8 12:14:45 2006 From: ivoks at ubuntu.com (=?utf-8?q?Ante_Karamati=C4=87?=) Date: Sat, 08 Jul 2006 12:14:45 -0000 Subject: [Bug 6627] Re: lexmark z53 blank pages References: <20060110202826.5372.9972.malonedeb@gangotri.ubuntu.com> Message-ID: <20060708121445.27257.56624.malone@gangotri.ubuntu.com> @frogzoo could you append following information: apt-cache showsrc cupsys gutenprint | grep ^Version Thanks. -- lexmark z53 blank pages https://launchpad.net/bugs/6627 From infyquest at gmail.com Sat Jul 8 16:34:41 2006 From: infyquest at gmail.com (Vijay Kiran Kamuju) Date: Sat, 08 Jul 2006 16:34:41 -0000 Subject: [Bug 52302] Intel Pro Wireless 3945 is not detected with latest kernel update References: <20060708063621.27257.43382.malonedeb@gangotri.ubuntu.com> Message-ID: <20060708163441.27257.34598.launchpad@canonical@gangotri.ubuntu.com> Public bug reported: Binary package hint: linux-image-2.6-386 Hi, I am have installed KUbuntu Dapper Drake on my laptop DELL E1705. With the linux-image (kernel) version present in after installation allows me to connect to Internet through my WLAN card. After that I installed all the updates using adept and logged in with the new linux-image. Now I am unable to connect to internet as my card is not being detected. Please send me a fix or upload the fix somewhere Thanks, VJ ** Affects: linux-source-2.6.15 (Ubuntu) Importance: Untriaged Status: Needs Info -- Intel Pro Wireless 3945 is not detected with latest kernel update https://launchpad.net/bugs/52302 From jpcman at gmail.com Sat Jul 8 16:26:22 2006 From: jpcman at gmail.com (Jordi) Date: Sat, 08 Jul 2006 16:26:22 -0000 Subject: [Bug 12214] Re: After shutdown, screen output disappears but laptop does not actually power off References: <20060113132420.21012.44035.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060708162623.19447.64505.malone@gandwana.ubuntu.com> I still have this problem with a HP Pavilion ze2397ea AMD64. Initially it powered off correctly, but with the first round of updates after installing dapper, the problem appeared again. I don't know which package should I downgrade, and I don't know either if this could be possible by a matter of other packages' dependencies. -- After shutdown, screen output disappears but laptop does not actually power off https://launchpad.net/bugs/12214 From ben.collins at ubuntu.com Sat Jul 8 16:34:41 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Sat, 08 Jul 2006 16:34:41 -0000 Subject: [Bug 52302] Re: Intel Pro Wireless 3945 is not detected with latest kernel update References: <20060708063621.27257.43382.malonedeb@gangotri.ubuntu.com> Message-ID: <20060708163441.27257.31682.malone@gangotri.ubuntu.com> Are you sure you have all the required packages in the update? Please run this command: sudo apt-get install linux-386 ** Changed in: linux-image-2.6.15-23-386 (Ubuntu) Sourcepackagename: linux-image-2.6.15-23-386 => linux-source-2.6.15 Status: Unconfirmed => Needs Info -- Intel Pro Wireless 3945 is not detected with latest kernel update https://launchpad.net/bugs/52302 From ben.collins at ubuntu.com Sat Jul 8 16:36:16 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Sat, 08 Jul 2006 16:36:16 -0000 Subject: [Bug 52323] Re: Unusual shutdown problem References: <20060708121023.19447.34119.malonedeb@gandwana.ubuntu.com> Message-ID: <20060708163616.19629.97442.malone@gandwana.ubuntu.com> This really would be much of a problem in the kernel. It could be something in the shutdown scripts. It could just be something in your laptop. But if the system powers off, then the kernel did what it was supposed to. It's not responsible for how long it takes to get to the power-off point. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Unconfirmed => Rejected -- Unusual shutdown problem https://launchpad.net/bugs/52323 From hannes.hauswedell at gmail.com Sat Jul 8 17:20:13 2006 From: hannes.hauswedell at gmail.com (Hannes Hauswedell) Date: Sat, 08 Jul 2006 17:20:13 -0000 Subject: [Bug 48932] Re: i915_wait_irq error: system hangs while running heavy graphics applications References: <20060608003437.3609.4293.malonedeb@gangotri.ubuntu.com> Message-ID: <20060708172013.19629.89977.malone@gandwana.ubuntu.com> I can confirm this bug. I have two up-to-date dapper laptops, a Dell Inspiron 640m and a Dell Inspiron 1300. My experiences: When i start a full-screen OpenGl application , like Quake3 the screen first remains black, but pressing Ctrl+Esc redraws the screen, showing the menu. everything works fine then. When i start Warcraft3 in Wine, i sometimes have the same situation (menu is black, but if i manage to start a game via keyboard-shortcuts everything works ok). most of the times though, the screen becomes black, the sound plays, then stops, i cannot use keyboard shortcuts , the application, the x-server and everathing with it hangs. i somtimes see the mouse in a little area in the center of the screen. the rest stays black, but redraws once in while (the resolution seems to change). i have no way of getting out of this, neither Ctrl+Alt+Backspace nor Ctrl+Alt+F* work. BUT i am able to login in via ssh and to perform normal actions like reboot. (note that killing or attempting to restart X does not work) via ssh i found out that one message is logged: [17183271.528000] [drm:i915_wait_irq] *ERROR* i915_wait_irq: EBUSY -- rec: 736021 emitted: 736024 so i am pretty sure its the same issue. -- i915_wait_irq error: system hangs while running heavy graphics applications https://launchpad.net/bugs/48932 From toby.smithe at gmail.com Sat Jul 8 17:50:14 2006 From: toby.smithe at gmail.com (Toby Smithe) Date: Sat, 08 Jul 2006 17:50:14 -0000 Subject: [Bug 52255] Re: After kernel-image installation kernel panic and no grub updated References: <20060707162731.19447.34300.malonedeb@gandwana.ubuntu.com> Message-ID: <20060708175014.27257.78586.malone@gangotri.ubuntu.com> Is this a duplicate of my bug 51488? -- After kernel-image installation kernel panic and no grub updated https://launchpad.net/bugs/52255 From frogzoo at chilli.net.au Sat Jul 8 18:46:07 2006 From: frogzoo at chilli.net.au (frogzoo) Date: Sat, 08 Jul 2006 18:46:07 -0000 Subject: [Bug 6627] Re: lexmark z53 blank pages References: <20060110202826.5372.9972.malonedeb@gangotri.ubuntu.com> Message-ID: <20060708184607.27312.17258.malone@gangotri.ubuntu.com> apt-cache showsrc cupsys gutenprint | grep ^Version Version: 1.2.0-0ubuntu5 Version: 1.2.1-0ubuntu1 Version: 5.0.0~rc2-0ubuntu6 Print _was_ working immediately after the updates (at 600dpi iirc) However, since fiddling with the printer settings - resolution and the printer ink set itself back to color for some reason, which I reset to black, anyhow, it's now not printing again. Let me know if you need any more info. -- lexmark z53 blank pages https://launchpad.net/bugs/6627 From allan at lucca.dk Sat Jul 8 19:41:29 2006 From: allan at lucca.dk (Underdunk) Date: Sat, 08 Jul 2006 19:41:29 -0000 Subject: [Bug 43961] Re: Power down after shutdown does not work... References: <20060510072310.21520.62027.malonedeb@gandwana.ubuntu.com> Message-ID: <20060708194129.27312.25800.malone@gangotri.ubuntu.com> Same problem with LG Electronics S1 laptop -- Power down after shutdown does not work... https://launchpad.net/bugs/43961 From caravena at ubuntu-cl.org Sat Jul 8 19:55:34 2006 From: caravena at ubuntu-cl.org (Cristian Aravena Romero) Date: Sat, 08 Jul 2006 19:55:34 -0000 Subject: [Bug 52370] Error in BIOS and ACPI References: <20060708195534.27312.51213.malonedeb@gangotri.ubuntu.com> Message-ID: <20060708195534.27312.51213.malonedeb@gangotri.ubuntu.com> Public bug reported: Binary package hint: linux-image-2.6-k7 Package: linux-image-2.6.17-3-k7 Version: 2.6.17-3.4 I write in console dmesg, and read error: $dmesg [17179569.184000] Linux version 2.6.17-3-k7 (buildd at vernadsky) (gcc version 4.1.2 20060613 (prerelease) (Ubuntu 4.1.1-2ubuntu3)) #1 SMP Thu Jun 29 04:37:13 UTC 2006 [...] [17179571.960000] ACPI: bus type pci registered [17179571.960000] PCI: BIOS Bug: MCFG area is not E820-reserved [17179571.960000] PCI: Not using MMCONFIG. [17179571.960000] PCI: PCI BIOS revision 2.10 entry at 0xfd8bc, last bus=5 [17179571.960000] Setting up standard PCI resources [17179571.960000] ACPI: Subsystem revision 20060127 [17179571.960000] ACPI: Interpreter enabled [17179571.960000] ACPI: Using IOAPIC for interrupt routing [17179571.960000] ACPI Error (nsxfeval-0242): Handle is NULL and Pathname is relative [20060127] [17179571.960000] ACPI Error (nsxfeval-0242): Handle is NULL and Pathname is relative [20060127] [17179571.960000] ACPI Error (nsxfeval-0242): Handle is NULL and Pathname is relative [20060127] [17179571.960000] ACPI Error (nsxfeval-0242): Handle is NULL and Pathname is relative [20060127] [17179571.960000] ACPI: PCI Root Bridge [PCI0] (0000:00) See hardware: https://wiki.ubuntu.com/LaptopTestingTeam/CompaqPresarioV2417LA -- System Information: Debian Release: testing/unstable APT prefers edgy APT policy: (500, 'edgy') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/dash Kernel: Linux 2.6.17-3-k7 Locale: LANG=es_CL.UTF-8, LC_CTYPE=es_CL.UTF-8 (charmap=UTF-8) Versions of packages linux-image-2.6.17-3-k7 depends on: ii coreutils [fileutils] 5.93-5ubuntu5 The GNU core utilities ii initramfs-tools 0.40ubuntu32 tools for generating an initramfs ii module-init-tools 3.2.2-3ubuntu3 tools for managing Linux kernel mo Versions of packages linux-image-2.6.17-3-k7 recommends: ii grub 0.97-11ubuntu1 GRand Unified Bootloader ** Affects: linux-meta (Ubuntu) Importance: Untriaged Status: Unconfirmed ** Attachment added: "$dmesg" http://librarian.launchpad.net/3303754/dmesg.txt -- Error in BIOS and ACPI https://launchpad.net/bugs/52370 From jake.mathena at gmail.com Sat Jul 8 21:13:14 2006 From: jake.mathena at gmail.com (fire) Date: Sat, 08 Jul 2006 21:13:14 -0000 Subject: [Bug 52377] System does not boot. References: <20060708211314.19629.81693.malonedeb@gandwana.ubuntu.com> Message-ID: <20060708211314.19629.81693.malonedeb@gandwana.ubuntu.com> Public bug reported: I have an ASUS P4S800D-X motherboard with the most current BIOS. When the system boots it gets stuck at Uncompressing Linux... Ok, Booting the kernel. if I run it in recovery mode i see that it stops at ACPI: Looking for DSDT ... not found! I have tried using acpi=off noapic nolapic none of that works. once in a while ill get it to boot up but not very often. it hangs for about 100 atempts then starts onece... ** Affects: linux-source-2.6.15 (Ubuntu) Importance: Untriaged Status: Unconfirmed -- System does not boot. https://launchpad.net/bugs/52377 From infyquest at gmail.com Sat Jul 8 21:32:48 2006 From: infyquest at gmail.com (Vijay Kiran Kamuju) Date: Sat, 08 Jul 2006 21:32:48 -0000 Subject: [Bug 52302] Re: Intel Pro Wireless 3945 is not detected with latest kernel update References: <20060708063621.27257.43382.malonedeb@gangotri.ubuntu.com> Message-ID: <20060708213248.27257.6469.malone@gangotri.ubuntu.com> I think I am bit vague in the description. When i used the linux-image 2.6.15.15, I can connect to WLAN. Even though lspci says Intel Unknown 4222 (about the IPW 3945) wlanassist can detect the networks. but when i updated the kernel to 2.6.15.23 using adept. And booted into it, and started wlanassist. I am unable to detect and connect to my WLAN. the lspci output is the same. Sry, I have removed the 2.6.15.15, damn me. Now using windows for my internet purposes -- Intel Pro Wireless 3945 is not detected with latest kernel update https://launchpad.net/bugs/52302 From ben.collins at ubuntu.com Sat Jul 8 21:50:17 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Sat, 08 Jul 2006 21:50:17 -0000 Subject: [Bug 52302] Re: [Bug 52302] Re: Intel Pro Wireless 3945 is not detected with latest kernel update References: <20060708063621.27257.43382.malonedeb@gangotri.ubuntu.com> <20060708213248.27257.6469.malone@gangotri.ubuntu.com> Message-ID: <1152395418.11731.487.camel@grayson> On Sat, 2006-07-08 at 21:32 +0000, Vijay Kiran Kamuju wrote: > I think I am bit vague in the description. > When i used the linux-image 2.6.15.15, I can connect to WLAN. > Even though lspci says Intel Unknown 4222 (about the IPW 3945) > wlanassist can detect the networks. > but when i updated the kernel to 2.6.15.23 using adept. > And booted into it, and started wlanassist. > I am unable to detect and connect to my WLAN. > the lspci output is the same. > Sry, I have removed the 2.6.15.15, damn me. > Now using windows for my internet purposes Sounds to me like you were using ndiswrapper for ipw3945. Is that correct? If so, you need to not use that anymore, since it conflicts with the actual ipw3945 driver that is now present. Also, please make sure to run the command I specified. I am not familier with wlanassist, so this just may be a bug in that program. I know that ipw3945 is working for everyone else. -- Intel Pro Wireless 3945 is not detected with latest kernel update https://launchpad.net/bugs/52302 From infyquest at gmail.com Sat Jul 8 22:30:41 2006 From: infyquest at gmail.com (Vijay Kiran Kamuju) Date: Sat, 08 Jul 2006 22:30:41 -0000 Subject: [Bug 52302] Re: Intel Pro Wireless 3945 is not detected with latest kernel update References: <20060708063621.27257.43382.malonedeb@gangotri.ubuntu.com> Message-ID: <20060708223041.19447.37389.malone@gandwana.ubuntu.com> I think I am bit vague in the description. When i used the linux-image 2.6.15.15, I can connect to WLAN. Even though lspci says Intel Unknown 4222 (about the IPW 3945) wlanassist can detect the networks. but when i updated the kernel to 2.6.15.23 using adept. And booted into it, and started wlanassist. I am unable to detect and connect to my WLAN. the lspci output is the same. Sry, I have removed the 2.6.15.15, damn me. Now using windows for my internet purposes -- Intel Pro Wireless 3945 is not detected with latest kernel update https://launchpad.net/bugs/52302 From infyquest at gmail.com Sat Jul 8 22:33:08 2006 From: infyquest at gmail.com (Vijay Kiran Kamuju) Date: Sat, 08 Jul 2006 22:33:08 -0000 Subject: [Bug 52302] Re: Intel Pro Wireless 3945 is not detected with latest kernel update References: <20060708063621.27257.43382.malonedeb@gangotri.ubuntu.com> Message-ID: <20060708223308.27312.27970.malone@gangotri.ubuntu.com> Sorry for the duplicate comment. I am currently on win xp. well i am unable to connect to internet. so i cannot do a apt-get. How can i be sure i have correctly installed linux-image? I am new to kubuntu, previously I was using fedora. -- Intel Pro Wireless 3945 is not detected with latest kernel update https://launchpad.net/bugs/52302 From aigarius at debian.org Sat Jul 8 23:58:17 2006 From: aigarius at debian.org (Aigars Mahinovs) Date: Sat, 08 Jul 2006 23:58:17 -0000 Subject: [Bug 30557] Re: cpu idle time in /proc/stat wrong References: <20060205141542.11709.55517.malonedeb@gandwana.ubuntu.com> Message-ID: <20060708235817.19629.17191.malone@gandwana.ubuntu.com> Confirming the bug with latest Dapper and HP nx6110. Willing to assist with debugging as I am a DD and am willing to follow instructions to fix this. -- cpu idle time in /proc/stat wrong https://launchpad.net/bugs/30557 From fcb at fredbenenson.com Sun Jul 9 03:01:59 2006 From: fcb at fredbenenson.com (Fred Benenson) Date: Sun, 09 Jul 2006 03:01:59 -0000 Subject: [Bug 52394] T42 fails to resume from suspend References: <20060709030159.19629.1114.malonedeb@gandwana.ubuntu.com> Message-ID: <20060709030159.19629.1114.malonedeb@gandwana.ubuntu.com> Public bug reported: Binary package hint: linux-686 Running Dapper Drake, upgraded from Breezy (where sleep worked like a charm). Anyway, I've modified /boot/grub/menu.lst to include apm=on acpi=off nolapic acpi_sleep=s3_bios resume=/dev/hda2 on boot, and set ACPI_SLEEP=true in /etc/default/acpi-support. I can get the machine to go into Sleep mode, but when I hit Fn to get it out, and it starts resuming, it freezes just as it begins to render the screen. Most of the time a little box of horizontal lines appears over where my cursor left off, but one time I was able to get it to draw most of my desktop, though the image was totally garbled and the machine was essentially unresponsive. I have to hard reboot to fix. I'm using the fglrx drivers for X, but the ati ones didn't seem to solve this problem either. Any thoughts? Or places to look for what precise error is ocurring on resume? Thanks. F ** Affects: linux-meta (Ubuntu) Importance: Untriaged Status: Unconfirmed -- T42 fails to resume from suspend on Dapper https://launchpad.net/bugs/52394 From fcb at fredbenenson.com Sun Jul 9 03:07:52 2006 From: fcb at fredbenenson.com (Fred Benenson) Date: Sun, 09 Jul 2006 03:07:52 -0000 Subject: [Bug 52394] Re: T42 fails to resume from suspend on Dapper References: <20060709030159.19629.1114.malonedeb@gandwana.ubuntu.com> Message-ID: <20060709030752.19629.89120.launchpad@gandwana.ubuntu.com> ** Summary changed: - T42 fails to resume from suspend + T42 fails to resume from suspend on Dapper ** Description changed: Binary package hint: linux-686 - I've modified /boot/grub/menu.lst to include apm=on acpi=off nolapic - acpi_sleep=s3_bios resume=/dev/hda2 on boot, and set ACPI_SLEEP=true in - /etc/default/acpi-support. I can get the machine to go into Sleep mode, - but when I hit Fn to get it out, and it starts resuming, it freezes just - as it begins to render the screen. Most of the time a little box of - horizontal lines appears over where my cursor left off, but one time I - was able to get it to draw most of my desktop, though the image was - totally garbled and the machine was essentially unresponsive. + Running Dapper Drake, upgraded from Breezy (where sleep worked like a + charm). + + Anyway, I've modified /boot/grub/menu.lst to include apm=on acpi=off + nolapic acpi_sleep=s3_bios resume=/dev/hda2 on boot, and set + ACPI_SLEEP=true in /etc/default/acpi-support. I can get the machine to + go into Sleep mode, but when I hit Fn to get it out, and it starts + resuming, it freezes just as it begins to render the screen. Most of the + time a little box of horizontal lines appears over where my cursor left + off, but one time I was able to get it to draw most of my desktop, + though the image was totally garbled and the machine was essentially + unresponsive. I have to hard reboot to fix. I'm using the fglrx drivers for X, but the ati ones didn't seem to solve this problem either. Any thoughts? Or places to look for what precise error is ocurring on resume? Thanks. F -- T42 fails to resume from suspend on Dapper https://launchpad.net/bugs/52394 From b.schliessmann at web.de Sun Jul 9 10:11:41 2006 From: b.schliessmann at web.de (=?utf-8?q?Bj=C3=B6rn_Schlie=C3=9Fmann?=) Date: Sun, 09 Jul 2006 10:11:41 -0000 Subject: [Bug 52323] Re: Unusual shutdown problem References: <20060708121023.19447.34119.malonedeb@gandwana.ubuntu.com> Message-ID: <20060709101141.27312.56123.malone@gangotri.ubuntu.com> I don't have a laptop, this is a common desktop computer. I don't have this problem with Debian testing or Windows XP. -- Unusual shutdown problem https://launchpad.net/bugs/52323 From drx at a-blast.org Sun Jul 9 12:34:59 2006 From: drx at a-blast.org (drx) Date: Sun, 09 Jul 2006 12:34:59 -0000 Subject: [Bug 50031] Confirmed on X41 References: <20060616182146.13137.51951.malonedeb@gandwana.ubuntu.com> Message-ID: <20060709123459.19447.75521.malone@gandwana.ubuntu.com> On my X41 it seems to work 1 out of 100 times, but i came to switching it off rather than risking a crash. -- [regression] Suspend [to-RAM and to-disk] is broken in 2.6.15-25.43 https://launchpad.net/bugs/50031 From stefan.sonnenberg at freenet.de Sun Jul 9 13:31:38 2006 From: stefan.sonnenberg at freenet.de (Stefan Sonnenberg-Carstens) Date: Sun, 09 Jul 2006 13:31:38 -0000 Subject: [Bug 52408] External Freecom PCMCIA DVD/CD driver not recognized References: <20060709081819.27257.5450.malonedeb@gangotri.ubuntu.com> Message-ID: <20060709133138.27312.29845.launchpad@canonical@gangotri.ubuntu.com> Public bug reported: Binary package hint: pcmcia-cs The drive (PX1053E-1NMD) was shipped along with my toshiba portege r100 as an option. It is not recognized by the kernel. dmesg: [17179569.184000] Linux version 2.6.15-25-386 (buildd at terranova) (gcc version 4.0.3 (Ubuntu 4.0.3-1ubuntu5)) #1 PREEMPT Wed Jun 14 11:25:49 UTC 2006 [17179569.184000] BIOS-provided physical RAM map: [17179569.184000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [17179569.184000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [17179569.184000] BIOS-e820: 00000000000e0000 - 00000000000eee00 (reserved) [17179569.184000] BIOS-e820: 00000000000eee00 - 00000000000ef000 (ACPI NVS) [17179569.184000] BIOS-e820: 00000000000ef000 - 0000000000100000 (reserved) [17179569.184000] BIOS-e820: 0000000000100000 - 000000004ffca000 (usable) [17179569.184000] BIOS-e820: 000000004ffca000 - 000000004ffd0000 (reserved) [17179569.184000] BIOS-e820: 000000004ffd0000 - 000000004ffe0000 (ACPI data) [17179569.184000] BIOS-e820: 000000004ffe0000 - 0000000050000000 (reserved) [17179569.184000] BIOS-e820: 00000000feda0000 - 00000000fedc0000 (reserved) [17179569.184000] BIOS-e820: 00000000ffb80000 - 00000000ffc00000 (reserved) [17179569.184000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) [17179569.184000] 383MB HIGHMEM available. [17179569.184000] 896MB LOWMEM available. [17179569.184000] On node 0 totalpages: 327626 [17179569.184000] DMA zone: 4096 pages, LIFO batch:0 [17179569.184000] DMA32 zone: 0 pages, LIFO batch:0 [17179569.184000] Normal zone: 225280 pages, LIFO batch:31 [17179569.184000] HighMem zone: 98250 pages, LIFO batch:31 [17179569.184000] DMI 2.3 present. [17179569.184000] ACPI: RSDP (v000 TOSHIB ) @ 0x000f01e0 [17179569.184000] ACPI: RSDT (v001 TOSHIB 750 0x00970814 TASM 0x04010000) @ 0x4ffd0000 [17179569.184000] ACPI: FADT (v002 TOSHIB 750 0x20030101 TASM 0x04010000) @ 0x4ffd005c [17179569.184000] ACPI: SSDT (v001 TOSHIB R100 0x20030220 MSFT 0x0100000e) @ 0x4ffd537a [17179569.184000] ACPI: DBGP (v001 TOSHIB 750 0x00970814 TASM 0x04010000) @ 0x4ffd00e0 [17179569.184000] ACPI: DSDT (v001 TOSHIB R100 0x20030313 MSFT 0x0100000e) @ 0x00000000 [17179569.184000] ACPI: PM-Timer IO Port: 0xd808 [17179569.184000] Allocating PCI resources starting at 60000000 (gap: 50000000:aeda0000) [17179569.184000] Built 1 zonelists [17179569.184000] Kernel command line: root=/dev/hda6 ro quiet splash [17179569.184000] Local APIC disabled by BIOS (or by default) -- you can enable it with "lapic" [17179569.184000] mapped APIC to ffffd000 (01a04000) [17179569.184000] Initializing CPU#0 [17179569.184000] PID hash table entries: 4096 (order: 12, 65536 bytes) [17179569.184000] Detected 997.611 MHz processor. [17179569.184000] Using pmtmr for high-res timesource [17179569.184000] Console: colour VGA+ 80x25 [17179569.780000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [17179569.780000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [17179569.860000] Memory: 1288260k/1310504k available (1976k kernel code, 20988k reserved, 606k data, 288k init, 393000k highmem) [17179569.860000] Checking if this processor honours the WP bit even in supervisor mode... Ok. [17179569.940000] Calibrating delay using timer specific routine.. 1996.98 BogoMIPS (lpj=3993978) [17179569.940000] Security Framework v1.0.0 initialized [17179569.940000] SELinux: Disabled at boot. [17179569.940000] Mount-cache hash table entries: 512 [17179569.940000] CPU: After generic identify, caps: a7e9f9bf 00000000 00000000 00000000 00000180 00000000 00000000 [17179569.940000] CPU: After vendor identify, caps: a7e9f9bf 00000000 00000000 00000000 00000180 00000000 00000000 [17179569.940000] CPU: L1 I cache: 32K, L1 D cache: 32K [17179569.940000] CPU: L2 cache: 1024K [17179569.940000] CPU: After all inits, caps: a7e9f9bf 00000000 00000000 00000040 00000180 00000000 00000000 [17179569.940000] mtrr: v2.0 (20020519) [17179569.940000] CPU: Intel(R) Pentium(R) M processor 1000MHz stepping 05 [17179569.940000] Enabling fast FPU save and restore... done. [17179569.940000] Enabling unmasked SIMD FPU exception support... done. [17179569.940000] Checking 'hlt' instruction... OK. [17179569.956000] checking if image is initramfs... it is [17179571.424000] Freeing initrd memory: 6613k freed [17179571.436000] ACPI: Looking for DSDT ... not found! [17179571.440000] ACPI: setting ELCR to 0200 (from 0a00) [17179571.440000] NET: Registered protocol family 16 [17179571.440000] EISA bus registered [17179571.440000] ACPI: bus type pci registered [17179571.440000] PCI: PCI BIOS revision 2.10 entry at 0xfd81a, last bus=4 [17179571.440000] PCI: Using configuration type 1 [17179571.440000] ACPI: Subsystem revision 20051216 [17179571.448000] ACPI: Interpreter enabled [17179571.448000] ACPI: Using PIC for interrupt routing [17179571.448000] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11) [17179571.448000] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11) [17179571.448000] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11) [17179571.448000] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11) [17179571.448000] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 *11) [17179571.448000] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11) [17179571.448000] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11) [17179571.452000] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11) [17179571.452000] ACPI: PCI Root Bridge [PCI0] (0000:00) [17179571.452000] PCI: Probing PCI hardware (bus 00) [17179571.452000] ACPI: Assume root bridge [\_SB_.PCI0] bus is 0 [17179571.452000] PCI quirk: region d800-d87f claimed by ICH4 ACPI/GPIO/TCO [17179571.452000] PCI quirk: region eec0-eeff claimed by ICH4 GPIO [17179571.452000] PCI: Enabled i801 SMBus device [17179571.452000] PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 [17179571.452000] Boot video device is 0000:01:00.0 [17179571.452000] PCI: Transparent bridge - 0000:00:1e.0 [17179571.452000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [17179571.456000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] [17179571.460000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] [17179571.460000] ACPI: Power Resource [PFAN] (off) [17179571.464000] Linux Plug and Play Support v0.97 (c) Adam Belay [17179571.464000] pnp: PnP ACPI init [17179571.464000] pnp: PnP ACPI: found 10 devices [17179571.464000] PnPBIOS: Disabled by ACPI PNP [17179571.464000] PCI: Using ACPI for IRQ routing [17179571.464000] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [17179571.472000] pnp: 00:07: ioport range 0x1e0-0x1e7 has been reserved [17179571.472000] PCI: Bridge: 0000:00:01.0 [17179571.472000] IO window: disabled. [17179571.472000] MEM window: dff00000-f7ffffff [17179571.472000] PREFETCH window: 62000000-620fffff [17179571.472000] PCI: Bus 3, cardbus bridge: 0000:02:0b.0 [17179571.472000] IO window: 0000c000-0000c0ff [17179571.472000] IO window: 0000c400-0000c4ff [17179571.472000] PREFETCH window: 60000000-61ffffff [17179571.472000] MEM window: 64000000-65ffffff [17179571.472000] PCI: Bridge: 0000:00:1e.0 [17179571.472000] IO window: c000-cfff [17179571.472000] MEM window: dfd00000-dfdfffff [17179571.472000] PREFETCH window: 60000000-61ffffff [17179571.472000] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [17179571.472000] PCI: Enabling device 0000:02:0b.0 (0000 -> 0003) [17179571.472000] **** SET: Misaligned resource pointer: dfe807c2 Type 07 Len 0 [17179571.472000] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 [17179571.472000] PCI: setting IRQ 11 as level-triggered [17179571.472000] ACPI: PCI Interrupt 0000:02:0b.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 [17179571.472000] audit: initializing netlink socket (disabled) [17179571.472000] audit(1152439120.472:1): initialized [17179571.472000] highmem bounce pool size: 64 pages [17179571.472000] VFS: Disk quotas dquot_6.5.1 [17179571.472000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [17179571.472000] Initializing Cryptographic API [17179571.472000] io scheduler noop registered [17179571.472000] io scheduler anticipatory registered [17179571.472000] io scheduler deadline registered [17179571.472000] io scheduler cfq registered [17179571.476000] isapnp: Scanning for PnP cards... [17179571.828000] isapnp: No Plug & Play device found [17179571.848000] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [17179571.852000] serio: i8042 AUX port at 0x60,0x64 irq 12 [17179571.852000] serio: i8042 KBD port at 0x60,0x64 irq 1 [17179571.852000] Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled [17179571.856000] **** SET: Misaligned resource pointer: df80c2c2 Type 07 Len 0 [17179571.856000] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11 [17179571.856000] ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11 [17179571.856000] ACPI: PCI interrupt for device 0000:00:1f.6 disabled [17179571.856000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [17179571.856000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [17179571.856000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [17179571.856000] mice: PS/2 mouse device common for all mice [17179571.856000] EISA: Probing bus 0 at eisa.0 [17179571.856000] EISA: Detected 0 cards. [17179571.856000] NET: Registered protocol family 2 [17179571.888000] input: AT Translated Set 2 keyboard as /class/input/input0 [17179571.896000] IP route cache hash table entries: 65536 (order: 6, 262144 bytes) [17179571.896000] TCP established hash table entries: 262144 (order: 8, 1048576 bytes) [17179571.896000] TCP bind hash table entries: 65536 (order: 6, 262144 bytes) [17179571.896000] TCP: Hash tables configured (established 262144 bind 65536) [17179571.896000] TCP reno registered [17179571.896000] TCP bic registered [17179571.896000] NET: Registered protocol family 1 [17179571.896000] NET: Registered protocol family 8 [17179571.896000] NET: Registered protocol family 20 [17179571.896000] Using IPI Shortcut mode [17179571.896000] ACPI wakeup devices: [17179571.896000] MPC0 MPC1 LAN VIY0 USB1 USB2 USB4 AMDM PWRB LID [17179571.896000] ACPI: (supports S0 S3 S4 S5) [17179571.896000] Freeing unused kernel memory: 288k freed [17179571.968000] vga16fb: initializing [17179571.968000] vga16fb: mapped to 0xc00a0000 [17179572.028000] Console: switching to colour frame buffer device 80x25 [17179572.028000] fb0: VGA16 VGA frame buffer device [17179573.056000] Capability LSM initialized [17179573.184000] ACPI: Fan [FAN] (off) [17179573.192000] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [17179573.192000] ACPI: Thermal Zone [THRM] (50 C) [17179573.760000] ICH4: IDE controller at PCI slot 0000:00:1f.1 [17179573.760000] **** SET: Misaligned resource pointer: c1ad92c2 Type 07 Len 0 [17179573.760000] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11 [17179573.760000] ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11 [17179573.760000] ICH4: chipset revision 3 [17179573.760000] ICH4: not 100% native mode: will probe irqs later [17179573.760000] ide0: BM-DMA at 0xbfa0-0xbfa7, BIOS settings: hda:DMA, hdb:pio [17179573.760000] Probing IDE interface ide0... [17179574.052000] hda: TOSHIBA MK4004GAH, ATA DISK drive [17179574.724000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [17179575.184000] hda: max request size: 128KiB [17179575.184000] hda: 78126048 sectors (40000 MB), CHS=65535/16/63, UDMA(100) [17179575.184000] hda: cache flushes supported [17179575.184000] hda: hda1 hda2 < hda5 hda6 > [17179575.648000] usbcore: registered new driver usbfs [17179575.648000] usbcore: registered new driver hub [17179575.648000] USB Universal Host Controller Interface driver v2.3 [17179575.648000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 [17179575.648000] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [17179575.648000] uhci_hcd 0000:00:1d.0: UHCI Host Controller [17179575.652000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [17179575.652000] uhci_hcd 0000:00:1d.0: irq 11, io base 0x0000efe0 [17179575.652000] hub 1-0:1.0: USB hub found [17179575.652000] hub 1-0:1.0: 2 ports detected [17179575.756000] **** SET: Misaligned resource pointer: dfdc2702 Type 07 Len 0 [17179575.756000] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 [17179575.756000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11 [17179575.756000] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [17179575.756000] uhci_hcd 0000:00:1d.1: UHCI Host Controller [17179575.756000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 [17179575.756000] uhci_hcd 0000:00:1d.1: irq 11, io base 0x0000ef80 [17179575.756000] hub 2-0:1.0: USB hub found [17179575.756000] hub 2-0:1.0: 2 ports detected [17179575.860000] **** SET: Misaligned resource pointer: dfdc2402 Type 07 Len 0 [17179575.860000] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11 [17179575.860000] ACPI: PCI Interrupt 0000:00:1d.7[D] -> Link [LNKH] -> GSI 11 (level, low) -> IRQ 11 [17179575.860000] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [17179575.860000] ehci_hcd 0000:00:1d.7: EHCI Host Controller [17179575.860000] ehci_hcd 0000:00:1d.7: debug port 1 [17179575.860000] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [17179575.860000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 3 [17179575.860000] ehci_hcd 0000:00:1d.7: irq 11, io mem 0xdfeffc00 [17179575.864000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [17179575.864000] hub 3-0:1.0: USB hub found [17179575.864000] hub 3-0:1.0: 6 ports detected [17179575.992000] Probing IDE interface ide1... [17179576.728000] kjournald starting. Commit interval 5 seconds [17179576.728000] EXT3-fs: mounted filesystem with ordered data mode. [17179593.328000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [17179593.340000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [17179593.648000] Linux agpgart interface v0.101 (c) Dave Jones [17179593.652000] agpgart: Detected an Intel 855PM Chipset. [17179593.664000] agpgart: AGP aperture is 256M @ 0xc0000000 [17179594.200000] Real Time Clock Driver v1.12 [17179594.216000] hw_random: RNG not detected [17179594.248000] input: PC Speaker as /class/input/input1 [17179594.516000] ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11 [17179594.516000] PCI: Setting latency timer of device 0000:00:1f.5 to 64 [17179594.560000] e100: Intel(R) PRO/100 Network Driver, 3.4.14-k4-NAPI [17179594.564000] e100: Copyright(c) 1999-2005 Intel Corporation [17179594.604000] input: PS/2 Mouse as /class/input/input2 [17179594.640000] input: AlpsPS/2 ALPS GlidePoint as /class/input/input3 [17179594.764000] ieee80211_crypt: registered algorithm 'NULL' [17179594.764000] ieee80211: 802.11 data/management/control stack, git-1.1.7 [17179594.764000] ieee80211: Copyright (C) 2004-2005 Intel Corporation [17179595.000000] ipw2100: Intel(R) PRO/Wireless 2100 Network Driver, 1.1.4 [17179595.000000] ipw2100: Copyright(c) 2003-2005 Intel Corporation [17179595.064000] ts: Compaq touchscreen protocol output [17179595.336000] intel8x0_measure_ac97_clock: measured 55394 usecs [17179595.336000] intel8x0: clocking to 48000 [17179595.340000] **** SET: Misaligned resource pointer: f7ecd0c2 Type 07 Len 0 [17179595.340000] ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 11 [17179595.340000] ACPI: PCI Interrupt 0000:02:08.0[A] -> Link [LNKE] -> GSI 11 (level, low) -> IRQ 11 [17179595.368000] e100: eth0: e100_probe: addr 0xdfdff000, irq 11, MAC addr 00:0E:7B:F6:E5:04 [17179595.368000] ACPI: PCI Interrupt 0000:02:0a.0[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11 [17179595.368000] ipw2100: Detected Intel PRO/Wireless 2100 Network Connection [17179595.880000] ACPI: PCI Interrupt 0000:02:0b.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 [17179595.880000] Yenta: CardBus bridge found at 0000:02:0b.0 [1179:0001] [17179596.008000] Yenta: ISA IRQ mask 0x04b8, PCI irq 11 [17179596.008000] Socket status: 30000007 [17179596.008000] Yenta: Raising subordinate bus# of parent bus (#02) from #04 to #06 [17179596.008000] pcmcia: parent PCI bridge I/O window: 0xc000 - 0xcfff [17179596.008000] cs: IO port probe 0xc000-0xcfff: clean. [17179596.008000] pcmcia: parent PCI bridge Memory window: 0xdfd00000 - 0xdfdfffff [17179596.008000] pcmcia: parent PCI bridge Memory window: 0x60000000 - 0x61ffffff [17179596.396000] e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex [17179596.500000] cs: IO port probe 0x100-0x3af: clean. [17179596.500000] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7 [17179596.500000] cs: IO port probe 0x820-0x8ff: clean. [17179596.500000] cs: IO port probe 0xc00-0xcf7: clean. [17179596.504000] cs: IO port probe 0xa00-0xaff: clean. [17179596.840000] lp: driver loaded but no devices found [17179596.940000] Adding 1052216k swap on /dev/hda5. Priority:-1 extents:1 across:1052216k [17179597.076000] EXT3 FS on hda6, internal journal [17179597.316000] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 [17179597.316000] md: bitmap version 4.39 [17179597.476000] NET: Registered protocol family 17 [17179597.988000] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel at redhat.com [17179601.004000] ACPI: AC Adapter [ADP1] (on-line) [17179601.008000] ACPI: Battery Slot [BAT1] (battery present) [17179601.008000] ACPI: Battery Slot [BAT2] (battery present) [17179601.120000] ACPI: Power Button (FF) [PWRF] [17179601.120000] ACPI: Power Button (CM) [PWRB] [17179601.120000] ACPI: Lid Switch [LID] [17179601.264000] ibm_acpi: ec object not found [17179601.304000] pcc_acpi: loading... [17179601.408000] toshiba_acpi: Toshiba Laptop ACPI Extras version 0.19a-dev [17179601.408000] toshiba_acpi: HCI method: \_SB_.VALD.GHCI [17179601.408000] toshiba_acpi: Toshiba hotkeys are sent as ACPI events [17179601.408000] toshiba_acpi: ktoshkeyd will check 2 times per second [17179601.412000] toshiba_acpi: Dropped 0 keys from the queue on startup [17179601.436000] ACPI: Video Device [VGA] (multi-head: yes rom: yes post: no) [17179602.544000] NET: Registered protocol family 10 [17179602.544000] lo: Disabled Privacy Extensions [17179602.544000] IPv6 over IPv4 tunneling driver [17179609.136000] ppdev: user-space parallel port driver [17179609.564000] apm: BIOS version 1.2 Flags 0x02 (Driver version 1.16ac) [17179609.564000] apm: overridden by ACPI. [17179613.144000] eth0: no IPv6 routers present [17179613.608000] Bluetooth: Core ver 2.8 [17179613.608000] NET: Registered protocol family 31 [17179613.608000] Bluetooth: HCI device and connection manager initialized [17179613.608000] Bluetooth: HCI socket layer initialized [17179613.652000] Bluetooth: L2CAP ver 2.8 [17179613.652000] Bluetooth: L2CAP socket layer initialized [17179613.784000] Bluetooth: RFCOMM socket layer initialized [17179613.784000] Bluetooth: RFCOMM TTY layer initialized [17179613.784000] Bluetooth: RFCOMM ver 1.7 [17179820.880000] hda: status error: status=0x58 { DriveReady SeekComplete DataRequest } [17179820.880000] ide: failed opcode was: unknown [17179820.880000] hda: drive not ready for command [17179820.972000] hda: CHECK for good STATUS [17179823.920000] pccard: CardBus card inserted into slot 0 Additional infos: root at sunmob:~# pccardctl info PRODID_1="" PRODID_2="" PRODID_3="" PRODID_4="" MANFID=0000,0000 FUNCID=255 root at sunmob:~# pccardctl ident Socket 0: no product info available The drive is ok, under WXP it works as a charme. ** Affects: linux-source-2.6.15 (Ubuntu) Importance: Untriaged Status: Unconfirmed -- External Freecom PCMCIA DVD/CD driver not recognized https://launchpad.net/bugs/52408 From mjg59 at codon.org.uk Sun Jul 9 13:30:53 2006 From: mjg59 at codon.org.uk (Matthew Garrett) Date: Sun, 09 Jul 2006 13:30:53 -0000 Subject: [Bug 52408] Re: External Freecom PCMCIA DVD/CD driver not recognized References: <20060709081819.27257.5450.malonedeb@gangotri.ubuntu.com> <20060709115804.GA2660@srcf.ucam.org> <1152450089.4898.0.camel@sunmob> Message-ID: <20060709133053.GA3125@srcf.ucam.org> Ok, the drive doesn't appear to be supported by any drivers at the moment. I'll look into this. ** Changed in: pcmcia-cs (Ubuntu) Sourcepackagename: pcmcia-cs => linux-source-2.6.15 -- External Freecom PCMCIA DVD/CD driver not recognized https://launchpad.net/bugs/52408 From cniehaus at kde.org Sun Jul 9 15:06:22 2006 From: cniehaus at kde.org (carsten) Date: Sun, 09 Jul 2006 15:06:22 -0000 Subject: [Bug 48479] Re: Complete system-halt References: <20060605080221.5009.10054.malonedeb@gandwana.ubuntu.com> Message-ID: <20060709150622.19629.23960.malone@gandwana.ubuntu.com> Ok, in the last couple of days the notebook had no problems at all, now it just happend again. I was playing music (amarok), Konqueror was open and I was chatting in Kopete via ICQ. Nothing special. This is now the 686-kernel. All updates are installed, I updated the machine this morning. I looked /var/log/*, but there was nothing locked when the system-halt happend. Please tell me what I can to in oder to help you fix this problem. -- Complete system-halt https://launchpad.net/bugs/48479 From nicolas.derive at club-internet.fr Sun Jul 9 16:28:56 2006 From: nicolas.derive at club-internet.fr (Nicolas DERIVE) Date: Sun, 09 Jul 2006 16:28:56 -0000 Subject: [Bug 52416] Kernel panic on startup References: <20060709101808.27312.14390.malonedeb@gangotri.ubuntu.com> Message-ID: <20060709162856.19447.90716.launchpad@canonical@gandwana.ubuntu.com> Public bug reported: When I try to boot the new 2.6.17-4-686 kernel, it panics, I have this message when grub starts it : Uncompressing Linux... Ok, booting the kernel [17179569.936000] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) [17179569.936000] I also noticed that the installation of this kernel doesn't update grub's menu.lst (I did this manually) and that I haven't a /boot/initrd.img-2.6.17-4-686 file on my system, and the reinstall of the kernel changes anything of that. ** Affects: kernel-package (Ubuntu) Importance: Untriaged Status: Fix Committed -- Kernel panic on startup https://launchpad.net/bugs/52416 From ben.collins at ubuntu.com Sun Jul 9 16:28:56 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Sun, 09 Jul 2006 16:28:56 -0000 Subject: [Bug 52416] Re: Kernel panic on startup References: <20060709101808.27312.14390.malonedeb@gangotri.ubuntu.com> Message-ID: <20060709162856.19447.77032.malone@gandwana.ubuntu.com> Known issues, was fixed in kernel-package, but wont affect the kernel till the next update. In the meantime you can run these commands to fix: sudo update-initramfs -c -k 2.6.17-4-686 sudo update-grub ** Changed in: linux-source-2.6.17 (Ubuntu) Sourcepackagename: linux-source-2.6.17 => kernel-package Status: Unconfirmed => Fix Committed -- Kernel panic on startup https://launchpad.net/bugs/52416 From tgpfeiffer at web.de Sun Jul 9 17:26:25 2006 From: tgpfeiffer at web.de (Tobias G. Pfeiffer) Date: Sun, 09 Jul 2006 17:26:25 -0000 Subject: [Bug 52450] doesn't boot with USB devices plugged in References: <20060709172625.19447.88494.malonedeb@gandwana.ubuntu.com> Message-ID: <20060709172625.19447.88494.malonedeb@gandwana.ubuntu.com> Public bug reported: Binary package hint: linux-image-2.6.15-25-686 Hi! When I boot up my notebook and have something connected to the USB ports (I have a HP printer and a wheel mouse there), sometimes it happens that Kubuntu just doesn't boot. It shows me "Mounting root file system" and then stops there (no "OK", no further boot steps, nothing). I also can't do anything with key combinations, i have to power off and reboot. After plugging out both USB devices, the same Kubuntu boots up fine. However, the boot failure is not 'always there', I mean I didn't have this problem for the last few weeks, though I'm running this kernel on Dapper for some time now. Bye Tobias ** Affects: linux-source-2.6.15 (Ubuntu) Importance: Untriaged Status: Unconfirmed -- doesn't boot with USB devices plugged in https://launchpad.net/bugs/52450 From drc at shadowdrama.net Sun Jul 9 20:06:14 2006 From: drc at shadowdrama.net (=?utf-8?q?Ville_P=C3=A4tsi?=) Date: Sun, 09 Jul 2006 20:06:14 -0000 Subject: [Bug 38278] Re: wifi card don't work. isl3886 is required but not installed References: <20060405203926.24486.7083.malonedeb@gangotri.ubuntu.com> Message-ID: <20060709200614.27257.6999.malone@gangotri.ubuntu.com> 2.6.15-18 works just fine for me. I blacklisted islsm_pci and the card completely stopped working in -25. In -18 it uses prism54 and all is fine. Were some of these pci id removals done the wrong way? My card is 10b7:6001 (3Com officeconnect 11g), and it definitely should be in the prism54 list, which doesn't seem to be the case in -25. -- wifi card don't work. isl3886 is required but not installed https://launchpad.net/bugs/38278 From mdz at ubuntu.com Sun Jul 9 21:06:58 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Sun, 09 Jul 2006 21:06:58 -0000 Subject: [Bug 52470] [regression from 2.6.12] parport_pc panics on Toshiba Satellite 2545XCDT References: <20060709210658.27257.73050.malonedeb@gangotri.ubuntu.com> Message-ID: <20060709210658.27257.73050.malonedeb@gangotri.ubuntu.com> Public bug reported: I upgraded my craptop to Dapper, and discovered that it would panic during boot. I eventually tracked this down to the parport_pc module, and with it blacklisted, the system boots and runs fine. The call trace is long, but the bottom of it which I can see on the screen indicates a bad EIP value inside a select(), down below the filesystem layer somewhere. Perhaps memory corruption of some sort? I can get the trace if you think it'd be useful, though it doesn't include any parport_pc or related code. ** Affects: linux-source-2.6.15 (Ubuntu) Importance: Untriaged Status: Unconfirmed -- [regression from 2.6.12] parport_pc panics on Toshiba Satellite 2545XCDT https://launchpad.net/bugs/52470 From ben.collins at ubuntu.com Sun Jul 9 23:07:14 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Sun, 09 Jul 2006 23:07:14 -0000 Subject: [Bug 38278] Re: [Bug 38278] Re: wifi card don't work. isl3886 is required but not installed References: <20060405203926.24486.7083.malonedeb@gangotri.ubuntu.com> <20060709200614.27257.6999.malone@gangotri.ubuntu.com> Message-ID: <1152486435.4773.17.camel@grayson> On Sun, 2006-07-09 at 20:06 +0000, Ville Pätsi wrote: > 2.6.15-18 works just fine for me. I blacklisted islsm_pci and the card > completely stopped working in -25. > > In -18 it uses prism54 and all is fine. Were some of these pci id > removals done the wrong way? > > My card is 10b7:6001 (3Com officeconnect 11g), and it definitely should > be in the prism54 list, which doesn't seem to be the case in -25. You should be able to add the id's manually in /sys/bus/pci/drivers/prism54/new_id Can't remember the exact text to echo in to this file, but google should help. -- wifi card don't work. isl3886 is required but not installed https://launchpad.net/bugs/38278 From gnomefreak at gmail.com Mon Jul 10 00:31:24 2006 From: gnomefreak at gmail.com (John Vivirito) Date: Mon, 10 Jul 2006 00:31:24 -0000 Subject: [Bug 52416] Re: Kernel panic on startup References: <20060709101808.27312.14390.malonedeb@gangotri.ubuntu.com> Message-ID: <20060710003124.27312.29836.malone@gangotri.ubuntu.com> Thank you it works great -- Kernel panic on startup https://launchpad.net/bugs/52416 From jean-marc.valin at usherbrooke.ca Mon Jul 10 00:51:57 2006 From: jean-marc.valin at usherbrooke.ca (jmspeex) Date: Mon, 10 Jul 2006 00:51:57 -0000 Subject: [Bug 48603] Re: USB fails after suspend to RAM on Dapper References: <20060606011354.5989.58390.malonedeb@gangotri.ubuntu.com> Message-ID: <20060710005157.19629.55932.malone@gandwana.ubuntu.com> Why is this still marked as "Needs Info". What other info do you need? -- USB fails after suspend to RAM on Dapper https://launchpad.net/bugs/48603 From christian_leimer at web.de Mon Jul 10 01:08:07 2006 From: christian_leimer at web.de (Christian Leimer) Date: Mon, 10 Jul 2006 01:08:07 -0000 Subject: [Bug 52255] Re: After kernel-image installation kernel panic and no grub updated References: <20060707162731.19447.34300.malonedeb@gandwana.ubuntu.com> Message-ID: <20060710010807.27257.80177.launchpad@gangotri.ubuntu.com> ** Bug 52098 has been marked a duplicate of this bug -- After kernel-image installation kernel panic and no grub updated https://launchpad.net/bugs/52255 From christian_leimer at web.de Mon Jul 10 01:08:07 2006 From: christian_leimer at web.de (Christian Leimer) Date: Mon, 10 Jul 2006 01:08:07 -0000 Subject: [Bug 52098] Re: initrd.img not created or removed References: <20060706135847.18269.97007.malonedeb@gandwana.ubuntu.com> Message-ID: <20060710010807.27257.72066.launchpad@gangotri.ubuntu.com> *** This bug is a duplicate of bug 52255 *** ** This bug has been marked a duplicate of bug 52255 After kernel-image installation kernel panic and no grub updated -- initrd.img not created or removed https://launchpad.net/bugs/52098 From jgotangco at ubuntu.com Mon Jul 10 04:49:22 2006 From: jgotangco at ubuntu.com (Jerome S. Gotangco) Date: Mon, 10 Jul 2006 04:49:22 -0000 Subject: [Bug 46314] Re: after recent update 3d acceleration with savage does not work References: <20060524110645.23797.61934.malonedeb@gandwana.ubuntu.com> Message-ID: <20060710044922.27312.48623.launchpad@gangotri.ubuntu.com> ** Bug 45793 has been marked a duplicate of this bug -- after recent update 3d acceleration with savage does not work https://launchpad.net/bugs/46314 From jgotangco at ubuntu.com Mon Jul 10 04:49:22 2006 From: jgotangco at ubuntu.com (Jerome S. Gotangco) Date: Mon, 10 Jul 2006 04:49:22 -0000 Subject: [Bug 45793] Re: xorg + dri + savage does not work (since last update) References: <20060520204252.18577.61412.malonedeb@gandwana.ubuntu.com> Message-ID: <20060710044922.27312.77087.launchpad@gangotri.ubuntu.com> *** This bug is a duplicate of bug 46314 *** ** This bug has been marked a duplicate of bug 46314 after recent update 3d acceleration with savage does not work -- xorg + dri + savage does not work (since last update) https://launchpad.net/bugs/45793 From emschwar at ericschwartz.us Mon Jul 10 07:46:39 2006 From: emschwar at ericschwartz.us (Eric Schwartz) Date: Mon, 10 Jul 2006 07:46:39 -0000 Subject: [Bug 51465] Re: ACPI suspend/hibernate doesn't work anymore References: <20060630210004.17054.3414.malonedeb@gangotri.ubuntu.com> Message-ID: <20060710074639.19447.96886.malone@gandwana.ubuntu.com> No problem -- here you go: emschwar at aragorn:~ $ dpkg -l | grep ^i.*linux-image ii linux-image-2.6.12-9-386 2.6.12-9.23 Linux kernel image for version 2.6.12 on 386. ii linux-image-2.6.15-23-386 2.6.15-23.39 Linux kernel image for version 2.6.15 on 386. ii linux-image-2.6.15-23-686 2.6.15-23.39 Linux kernel image for version 2.6.15 on PPro/Ce ii linux-image-2.6.15-25-686 2.6.15-25.43 Linux kernel image for version 2.6.15 on PPro/Ce ii linux-image-686 2.6.15.23 Linux kernel image on PPro/Celeron/PII/PIII/PIV. -- ACPI suspend/hibernate doesn't work anymore https://launchpad.net/bugs/51465 From drc at shadowdrama.net Mon Jul 10 09:39:40 2006 From: drc at shadowdrama.net (=?utf-8?q?Ville_P=C3=A4tsi?=) Date: Mon, 10 Jul 2006 09:39:40 -0000 Subject: [Bug 38278] Re: wifi card don't work. isl3886 is required but not installed References: <20060405203926.24486.7083.malonedeb@gangotri.ubuntu.com> Message-ID: <20060710093940.27312.58679.malone@gangotri.ubuntu.com> Adding the ID manually worked perfectly. The id 10b7:6001 needs to be removed from the islsm_pci driver and added back to the prism54 driver in the Ubuntu kernel. -- wifi card don't work. isl3886 is required but not installed https://launchpad.net/bugs/38278 From drc at shadowdrama.net Mon Jul 10 09:43:28 2006 From: drc at shadowdrama.net (=?utf-8?q?Ville_P=C3=A4tsi?=) Date: Mon, 10 Jul 2006 09:43:28 -0000 Subject: [Bug 46054] Re: Wifi card has stopped working References: <20060522192813.23797.33992.malonedeb@gandwana.ubuntu.com> Message-ID: <20060710094328.19629.9638.malone@gandwana.ubuntu.com> The bug is that the driver was changed from prism54 to islsm_pci, which is quite broken. I was able to fix this by blacklisting the islsm_pci driver and adding my card's pci-id back to the prism54 driver. See bug 38278 for the specifics. -- Wifi card has stopped working https://launchpad.net/bugs/46054 From scott at ubuntu.com Mon Jul 10 10:28:17 2006 From: scott at ubuntu.com (Scott James Remnant) Date: Mon, 10 Jul 2006 10:28:17 -0000 Subject: [Bug 51083] Re: does not create most of the harddisk devices References: <20060627070232.15526.12775.malonedeb@gandwana.ubuntu.com> Message-ID: <20060710102817.19447.49804.malone@gandwana.ubuntu.com> OOPS means it's not a udev bug ** Changed in: udev (Ubuntu) Status: Confirmed => Rejected -- does not create most of the harddisk devices https://launchpad.net/bugs/51083 From nicolas.derive at club-internet.fr Mon Jul 10 10:34:48 2006 From: nicolas.derive at club-internet.fr (Nicolas DERIVE) Date: Mon, 10 Jul 2006 10:34:48 -0000 Subject: [Bug 52416] Re: Kernel panic on startup References: <20060709101808.27312.14390.malonedeb@gangotri.ubuntu.com> Message-ID: <20060710103448.19447.94968.malone@gandwana.ubuntu.com> Thanks for your help. -- Kernel panic on startup https://launchpad.net/bugs/52416 From cimmo at libero.it Mon Jul 10 13:10:50 2006 From: cimmo at libero.it (Cimmo) Date: Mon, 10 Jul 2006 13:10:50 -0000 Subject: [Bug 46996] Re: Hotplugged sound devices get sound card index of 0 instead of PCI card References: <20060527221609.6729.24522.malonedeb@gangotri.ubuntu.com> Message-ID: <20060710131050.27312.69588.malone@gangotri.ubuntu.com> in Kubuntu there is no default selectable. Is fixed for Edgy? -- Hotplugged sound devices get sound card index of 0 instead of PCI card https://launchpad.net/bugs/46996 From ttmrichter at gmail.com Mon Jul 10 13:50:01 2006 From: ttmrichter at gmail.com (Michael T. Richter) Date: Mon, 10 Jul 2006 13:50:01 -0000 Subject: [Bug 52319] Sound Card on Haier H51 laptop is recognised, but not functional. References: <20060708105445.19629.95757.malonedeb@gandwana.ubuntu.com> Message-ID: <20060710135001.27257.83113.launchpad@canonical@gangotri.ubuntu.com> Public bug reported: I bought a new laptop today, a Haier H51. Ubuntu, Kubuntu and Xubuntu all work fine on it with two exceptions. (The first exception, semi- solved, is the subject of an earlier bug report.) This exception is the usual sound problem. The system recognises the sound card. /proc/asound/cards shows: 0 [SI7012 ]: ICH - SiS SI7012 SiS SI7012 with AD1888 at 0xe800, irq 177 This is pretty damned specific information, so I think it found it properly. Yet nothing comes out of the onboard speakers nor the headphone jack and no audio comes in via the built-in microphone nor the microphone jack. If someone can give me the Magic Incantations to get detailed information from the system, post them in reply and I'll go looking for the information and post it here. ** Affects: linux-source-2.6.15 (Ubuntu) Importance: Untriaged Status: Unconfirmed -- Sound Card on Haier H51 laptop is recognised, but not functional. https://launchpad.net/bugs/52319 From ttmrichter at gmail.com Mon Jul 10 13:50:01 2006 From: ttmrichter at gmail.com (Michael T. Richter) Date: Mon, 10 Jul 2006 13:50:01 -0000 Subject: [Bug 52319] Re: Sound Card on Haier H51 laptop is recognised, but not functional. References: <20060708105445.19629.95757.malonedeb@gandwana.ubuntu.com> Message-ID: <20060710135001.27257.21692.malone@gangotri.ubuntu.com> Added package as requested by Daniel T. Chen. ** Attachment added: "uname -r && amixer" http://librarian.launchpad.net/3321466/Bug%20%2352319%20-%20001.txt ** Changed in: Ubuntu Sourcepackagename: None => linux-source-2.6.15 -- Sound Card on Haier H51 laptop is recognised, but not functional. https://launchpad.net/bugs/52319 From marceloshima at yahoo.com.br Mon Jul 10 14:39:37 2006 From: marceloshima at yahoo.com.br (mshima) Date: Mon, 10 Jul 2006 14:39:37 -0000 Subject: [Bug 36461] Re: XOrg dualhead regression References: <20060324174628.6253.87338.malonedeb@gandwana.ubuntu.com> Message-ID: <20060710143937.19447.72173.launchpad@gandwana.ubuntu.com> ** Attachment added: "linux_bios_bug_6751" http://librarian.launchpad.net/3324330/992_linux_bios_bug_6751.dpatch -- XOrg dualhead regression https://launchpad.net/bugs/36461 From ondrej at sury.org Mon Jul 10 15:16:34 2006 From: ondrej at sury.org (=?utf-8?b?T25kxZllaiBTdXLDvQ==?=) Date: Mon, 10 Jul 2006 15:16:34 -0000 Subject: [Bug 52546] original HP keybord bundled with HP dc7600 doesn't work References: <20060710151635.27257.37195.malonedeb@gangotri.ubuntu.com> Message-ID: <20060710151635.27257.37195.malonedeb@gangotri.ubuntu.com> Public bug reported: Original keyboard bundled with HP dc7600 USDT (Ultra-Slim Desktop) doesn't work in Ubuntu. It does work on startup (GRUB, etc.), but after starting kernel it just doesn't work (no input is received). However when there is USB->PS2 converter attached (empty without anything plugged in), it works as expected. I guess it's propably connected to usbhid module??? ** Affects: linux-meta (Ubuntu) Importance: Untriaged Status: Unconfirmed -- original HP keybord bundled with HP dc7600 doesn't work https://launchpad.net/bugs/52546 From ondrej at sury.org Mon Jul 10 15:41:56 2006 From: ondrej at sury.org (=?utf-8?b?T25kxZllaiBTdXLDvQ==?=) Date: Mon, 10 Jul 2006 15:41:56 -0000 Subject: [Bug 52546] Re: original HP keybord bundled with HP dc7600 doesn't work References: <20060710151635.27257.37195.malonedeb@gangotri.ubuntu.com> Message-ID: <20060710154156.27312.76433.malone@gangotri.ubuntu.com> I forgot to mention that original keyboard is PS/2. -- original HP keybord bundled with HP dc7600 doesn't work https://launchpad.net/bugs/52546 From Gilles at Gravier.org Mon Jul 10 15:47:44 2006 From: Gilles at Gravier.org (Gilles Gravier) Date: Mon, 10 Jul 2006 15:47:44 -0000 Subject: [Bug 24925] Re: Unlink after no-IRQ References: <20060113143135.21012.9317.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060710154744.27312.56216.malone@gangotri.ubuntu.com> Same problem with a USB attached IDE hard disk. And acpi=off didn't fix it. Machine is SHUTTLE XPC ST20G5 with nVidia nForce chipset and AMD CPU. Running in 32 bit mode. -- Unlink after no-IRQ https://launchpad.net/bugs/24925 From luke.hoersten at gmail.com Mon Jul 10 15:57:57 2006 From: luke.hoersten at gmail.com (Luke Hoersten) Date: Mon, 10 Jul 2006 15:57:57 -0000 Subject: [Bug 52553] Kernel panic - not syncing: IO-APIC + timer doesn't work! References: <20060710155757.27312.91477.malonedeb@gangotri.ubuntu.com> Message-ID: <20060710155757.27312.91477.malonedeb@gangotri.ubuntu.com> Public bug reported: Binary package hint: linux-image-2.6.15-25-686 I'm running a dual core macbook and when I updated from 2.6.15-23 to -25, I *intermitantly* get this kernel panic on boot: "Kernel panic - not syncing: IO-APIC + timer doesn't work! Try using the 'noapic' kernel parameter" After searching around I found this post by a kernel developer with the same problem: http://lkml.org/lkml/2006/2/9/257 He describes the fix here: http://marc.theaimsgroup.com/?l=linux-kernel&m=114178139610707&w=2 It is fixed in 2.6.17 but maybe 2.6.15 should be patched for the last few months before the next release? ** Affects: linux-source-2.6.15 (Ubuntu) Importance: Untriaged Status: Unconfirmed -- Kernel panic - not syncing: IO-APIC + timer doesn't work! https://launchpad.net/bugs/52553 From marceloshima at gmail.com Mon Jul 10 16:26:50 2006 From: marceloshima at gmail.com (Marcelo Shima) Date: Mon, 10 Jul 2006 16:26:50 -0000 Subject: [Bug 45119] Re: (EE) SIS(1): Cannot read V_BIOS (3) References: <20060516203257.15819.33288.malonedeb@gangotri.ubuntu.com> Message-ID: <20060710162650.19629.75556.malone@gandwana.ubuntu.com> *** This bug is a duplicate of bug 36461 *** Possible fix: https://launchpad.net/distros/ubuntu/+source/xorg- server/+bug/36461/comments/28 ** This bug has been marked a duplicate of bug 36461 XOrg dualhead regression -- (EE) SIS(1): Cannot read V_BIOS (3) https://launchpad.net/bugs/45119 From marceloshima at gmail.com Mon Jul 10 16:28:01 2006 From: marceloshima at gmail.com (Marcelo Shima) Date: Mon, 10 Jul 2006 16:28:01 -0000 Subject: [Bug 36461] Re: XOrg dualhead regression References: <20060324174628.6253.87338.malonedeb@gandwana.ubuntu.com> Message-ID: <20060710162801.19447.30427.launchpad@gandwana.ubuntu.com> ** Bug 45119 has been marked a duplicate of this bug -- XOrg dualhead regression https://launchpad.net/bugs/36461 From marceloshima at gmail.com Mon Jul 10 16:38:47 2006 From: marceloshima at gmail.com (Marcelo Shima) Date: Mon, 10 Jul 2006 16:38:47 -0000 Subject: [Bug 48715] Re: libint10.so problem with dual monitor / dual video cards References: <20060606163324.6022.32610.malonedeb@gangotri.ubuntu.com> Message-ID: <20060710163847.19447.76771.launchpad@gandwana.ubuntu.com> *** This bug is a duplicate of bug 36461 *** ** This bug has been marked a duplicate of bug 36461 XOrg dualhead regression -- libint10.so problem with dual monitor / dual video cards https://launchpad.net/bugs/48715 From marceloshima at gmail.com Mon Jul 10 16:38:47 2006 From: marceloshima at gmail.com (Marcelo Shima) Date: Mon, 10 Jul 2006 16:38:47 -0000 Subject: [Bug 36461] Re: XOrg dualhead regression References: <20060324174628.6253.87338.malonedeb@gandwana.ubuntu.com> Message-ID: <20060710163847.19447.24294.launchpad@gandwana.ubuntu.com> ** Bug 48715 has been marked a duplicate of this bug -- XOrg dualhead regression https://launchpad.net/bugs/36461 From ben.collins at ubuntu.com Mon Jul 10 16:59:56 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Mon, 10 Jul 2006 16:59:56 -0000 Subject: [Bug 46054] Re: Wifi card has stopped working References: <20060522192813.23797.33992.malonedeb@gandwana.ubuntu.com> Message-ID: <20060710165956.19447.60995.launchpad@gandwana.ubuntu.com> *** This bug is a duplicate of bug 38278 *** ** This bug has been marked a duplicate of bug 38278 wifi card don't work. isl3886 is required but not installed -- Wifi card has stopped working https://launchpad.net/bugs/46054 From ben.collins at ubuntu.com Mon Jul 10 16:59:56 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Mon, 10 Jul 2006 16:59:56 -0000 Subject: [Bug 38278] Re: wifi card don't work. isl3886 is required but not installed References: <20060405203926.24486.7083.malonedeb@gangotri.ubuntu.com> Message-ID: <20060710165956.19447.98286.launchpad@gandwana.ubuntu.com> ** Bug 46054 has been marked a duplicate of this bug -- wifi card don't work. isl3886 is required but not installed https://launchpad.net/bugs/38278 From ben.collins at ubuntu.com Mon Jul 10 17:03:09 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Mon, 10 Jul 2006 17:03:09 -0000 Subject: [Bug 52546] Re: original HP keybord bundled with HP dc7600 doesn't work References: <20060710151635.27257.37195.malonedeb@gangotri.ubuntu.com> Message-ID: <20060710170309.27312.48687.malone@gangotri.ubuntu.com> Please provide dmesg output (attach via web interface, do not paste into comment). ** Changed in: linux-meta (Ubuntu) Sourcepackagename: linux-meta => linux-source-2.6.15 Status: Unconfirmed => Needs Info -- original HP keybord bundled with HP dc7600 doesn't work https://launchpad.net/bugs/52546 From sfllaw at ubuntu.com Mon Jul 10 21:57:08 2006 From: sfllaw at ubuntu.com (Simon Law) Date: Mon, 10 Jul 2006 21:57:08 -0000 Subject: [Bug 21860] Re: /dev/cdroms symlinks missing for SCSI (IDE SATA) CD-ROM (Acer TM4151) References: <20060113141508.21012.78461.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060710215708.19629.1681.malone@gandwana.ubuntu.com> This appears to be a kernel issue. ** Changed in: cdrom-detect (Ubuntu) Status: Unconfirmed => Rejected -- /dev/cdroms symlinks missing for SCSI (IDE SATA) CD-ROM (Acer TM4151) https://launchpad.net/bugs/21860 From sfllaw at ubuntu.com Mon Jul 10 22:16:20 2006 From: sfllaw at ubuntu.com (Simon Law) Date: Mon, 10 Jul 2006 22:16:20 -0000 Subject: [Bug 36461] Re: XOrg dualhead regression References: <20060324174628.6253.87338.malonedeb@gandwana.ubuntu.com> Message-ID: <20060710221620.19447.35293.launchpad@gandwana.ubuntu.com> ** Changed in: xorg (Ubuntu) Status: Unconfirmed => Rejected -- XOrg dualhead regression https://launchpad.net/bugs/36461 From silkensedai at online.fr Mon Jul 10 23:48:19 2006 From: silkensedai at online.fr (Mildred) Date: Mon, 10 Jul 2006 23:48:19 -0000 Subject: [Bug 52596] My paralell port isn't recognized References: <20060710234820.27312.44489.malonedeb@gangotri.ubuntu.com> Message-ID: <20060710234820.27312.44489.malonedeb@gangotri.ubuntu.com> Public bug reported: Binary package hint: linux-image-2.6.15-25-686 Recently, I added in my computer a PCI card to add a paralell port to my computer in order to be able to connect my printer. I thoudht my ubuntu dapper would be able to detect it and use it but the /dev/lp0 file does not exists. And I found the following message in dmesg : [4294707.628000] lp: driver loaded but no devices found Something strange is that I tried to boot with a Warty live-cd and the port is recognized ... and I can use it that way (unfortunately, I can't configure CUPS). The card also provides two serial ports. The description is aviable here : http://qtec.info/products/product.htm?artnr=12887 I tried to compile the kernel 2.6.17.3 from kernel.org using the config file from the ubuntu kernel but I did not succeed to boot with this new kernel, probably because I did not created any initrd image. This is the output of lspci 0000:00:0c.0 Serial controller: Timedia Technology Co Ltd PCI2S550 (Dual 16550 UART) (rev 01) (prog-if 02 [16550]) Subsystem: Timedia Technology Co Ltd: Unknown device 5079 Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Message-ID: <20060711024458.19629.45924.malonedeb@gandwana.ubuntu.com> Public bug reported: Binary package hint: linux-source-2.6.15 kernel 2.6.15-25.43 hang boot process with DMA timeout on hda. 2.6.15-23.39 does work fine. The machine is an old PIII 1GHz with the following hardware: 0000:00:00.0 Host bridge: VIA Technologies, Inc. VT82C693A/694x [Apollo PRO133x] (rev 44) 0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT82C598/694x [Apollo MVP3/Pro133x AGP] 0000:00:07.0 ISA bridge: VIA Technologies, Inc. VT82C596 ISA [Mobile South] (rev 23) 0000:00:07.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 10) 0000:00:07.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 11) 0000:00:07.3 Host bridge: VIA Technologies, Inc. VT82C596 Power Management (rev 30) 0000:00:08.0 SCSI storage controller: Adaptec AHA-2940U/UW/D / AIC-7881U 0000:00:09.0 Multimedia audio controller: Ensoniq ES1370 [AudioPCI] (rev 01) 0000:00:0a.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8029(AS) 0000:01:00.0 VGA compatible controller: ATI Technologies Inc Radeon R100 QD [Radeon 7200] ** Affects: linux-source-2.6.15 (Ubuntu) Importance: Untriaged Status: Unconfirmed -- kernel 2.6.15-25.43 hang with DMA timeout on hda https://launchpad.net/bugs/52599 From dalearlt at gmail.com Tue Jul 11 03:22:59 2006 From: dalearlt at gmail.com (shooterae5) Date: Tue, 11 Jul 2006 03:22:59 -0000 Subject: [Bug 46806] Re: Atheros based WLAN card stops responding References: <20060526181456.23022.77794.malonedeb@gangotri.ubuntu.com> Message-ID: <20060711032259.19629.72807.malone@gandwana.ubuntu.com> My Atheros wlan card connect to open access points great. I'm having no luck using WEP. I've had to open my home wireless network. I just can't get a IP address if I turn WEP on. Let me know what info might help figure this out... Cheers -- Atheros based WLAN card stops responding https://launchpad.net/bugs/46806 From infyquest at gmail.com Tue Jul 11 03:36:35 2006 From: infyquest at gmail.com (Vijay Kiran Kamuju) Date: Tue, 11 Jul 2006 03:36:35 -0000 Subject: [Bug 52302] Re: Intel Pro Wireless 3945 is not detected with latest kernel update References: <20060708063621.27257.43382.malonedeb@gangotri.ubuntu.com> Message-ID: <20060711033635.19447.35270.malone@gandwana.ubuntu.com> Sorry I gave some wrong info It works with 2.6.15.23 but does not work with 2.6.15.25 well my ifconfig output on 2.6.15.23 before connecting to wireless network eth0 Link encap:Ethernet HWaddr 00:15:C5:3A:F0:19 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) Interrupt:177 eth1 Link encap:Ethernet HWaddr 00:13:02:A5:19:FB UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:41289 errors:0 dropped:4402 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) Interrupt:177 Base address:0x4000 Memory:dcfff000-dcffffff lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:3 errors:0 dropped:0 overruns:0 frame:0 TX packets:3 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:172 (172.0 b) TX bytes:172 (172.0 b) after connecting to wireless network its showing like this eth0 Link encap:Ethernet HWaddr 00:15:C5:3A:F0:19 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) Interrupt:177 eth1 Link encap:Ethernet HWaddr 00:13:02:A5:19:FB inet addr:192.168.1.103 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::213:2ff:fea5:19fb/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:101 errors:0 dropped:5836 overruns:0 frame:0 TX packets:11 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1085 (1.0 KiB) TX bytes:1407 (1.3 KiB) Interrupt:177 Base address:0x4000 Memory:dcfff000-dcffffff lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:4 errors:0 dropped:0 overruns:0 frame:0 TX packets:4 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:284 (284.0 b) TX bytes:284 (284.0 b) When I use 2.6.15.25 I see only eth0 and lo and i cant see eth1 or wlan0 Ben, please help me, please. If you want ifconfig output in 2.6.15.25 I will attach it. Should i send the lsmod output in both kernels -- Intel Pro Wireless 3945 is not detected with latest kernel update https://launchpad.net/bugs/52302 From reynard.list at gmail.com Tue Jul 11 03:58:51 2006 From: reynard.list at gmail.com (Reynard Hilman) Date: Tue, 11 Jul 2006 03:58:51 -0000 Subject: [Bug 52602] Total system freeze when starting gaim References: <20060711035851.19447.7278.malonedeb@gandwana.ubuntu.com> Message-ID: <20060711035851.19447.7278.malonedeb@gandwana.ubuntu.com> Public bug reported: Binary package hint: linux-image-2.6.15-25-k7 The system freeze completely (doesn't respond to ctrl alt del. ctrl backspace, ctrl alt f1-f6), when I start gaim. (during loggin in to msn). The only other application running was firefox. This happens almost all the time (about 4 out of 6 times) when I use linux-image-2.6.15-25-k7, but never happen when I use linux- image-2.6.15-25-386. I haven't tried if other applications also cause system freeze on k7 linux image. lshw: description: Notebook product: Presario 2100 (DZ414U) vendor: Hewlett-Packard version: KAM1.57 serial: CNF4140Q5Z width: 32 bits capabilities: smbios-2.3 dmi-2.3 configuration: administrator_password=enabled boot=oem-specific chassis=notebook frontpanel_password=unknown keyboard_password=unknown power-on_password=disabled uuid=E00B80C7-2F63-D811-AEDA-000E7F70BEA9 *-core description: Motherboard product: 0024 vendor: Hewlett-Packard physical id: 0 version: PQ1A83 serial: None slot: USB2 *-firmware description: BIOS vendor: Phoenix Technologies Ltd. physical id: 0 version: KAM1.57 (02/19/2004) size: 110KB capacity: 448KB capabilities: isa pci pcmcia pnp upgrade shadowing escd cdboot bootselect socketedrom pcmciaboot edd int13floppynec int13floppytoshiba int5printscreen int9keyboard int14serial int17printer int10video acpi usb agp *-cpu description: CPU product: mobile AMD Athlon(tm) XP2800+ vendor: Advanced Micro Devices [AMD] physical id: 4 bus info: cpu at 0 version: 6.10.0 slot: mPGA462B size: 530MHz capacity: 2128MHz width: 32 bits clock: 133MHz capabilities: fpu fpu_exception wp vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov pat pse36 mmx fxsr sse syscall mp mmxext 3dnowext 3dnow cpufreq *-cache:0 description: L2 cache physical id: 8 slot: L2 Cache size: 512KB capacity: 1MB capabilities: synchronous internal write-back *-cache:1 description: L1 cache physical id: 0 size: 128KB *-cache:2 description: L2 cache physical id: 1 size: 512KB *-memory description: System Memory physical id: 1b slot: System board or motherboard size: 512MB capacity: 1GB *-bank:0 description: DIMM DRAM Synchronous physical id: 0 slot: M1 size: 512MB width: 64 bits *-bank:1 description: DIMM DRAM Synchronous [empty] physical id: 1 slot: M2 *-pci description: Host bridge product: AGP Bridge [IGP 320M] vendor: ATI Technologies Inc physical id: d4000000 bus info: pci at 00:00.0 version: 13 width: 32 bits clock: 66MHz resources: iomemory:d4000000-d7ffffff iomemory:d0400000-d0400fff *-pci description: PCI bridge product: PCI Bridge [IGP 320M] vendor: ATI Technologies Inc physical id: 1 bus info: pci at 00:01.0 version: 01 width: 32 bits clock: 66MHz capabilities: pci normal_decode bus_master *-display description: VGA compatible controller product: Radeon Mobility U1 vendor: ATI Technologies Inc physical id: 5 bus info: pci at 01:05.0 version: 00 size: 256MB width: 32 bits clock: 66MHz capabilities: vga bus_master cap_list resources: iomemory:e0000000-efffffff ioport:9000-90ff iomemory:d0100000-d010ffff irq:10 *-usb description: USB Controller product: USB 1.1 Controller vendor: ALi Corporation physical id: 2 bus info: pci at 00:02.0 version: 03 width: 32 bits clock: 33MHz capabilities: ohci bus_master cap_list configuration: driver=ohci_hcd resources: iomemory:d0000000-d0000fff irq:10 *-usbhost product: OHCI Host Controller vendor: Linux 2.6.15-25-386 ohci_hcd physical id: 1 bus info: usb at 1 logical name: usb1 version: 2.06 capabilities: usb-1.10 configuration: driver=hub maxpower=0mA slots=4 speed=12.0MB/s *-usb description: Mouse product: USB Mouse vendor: Logitech physical id: 2 bus info: usb at 1:2 version: 6.20 capabilities: usb-1.10 configuration: driver=usbhid maxpower=100mA speed=1.5MB/s *-multimedia description: Multimedia audio controller product: M5451 PCI AC-Link Controller Audio Device vendor: ALi Corporation physical id: 6 bus info: pci at 00:06.0 version: 02 width: 32 bits clock: 33MHz capabilities: bus_master cap_list configuration: driver=ALI 5451 resources: ioport:8400-84ff iomemory:d0001000-d0001fff irq:5 *-isa UNCLAIMED description: ISA bridge product: M1533 PCI to ISA Bridge [Aladdin IV] vendor: ALi Corporation physical id: 7 bus info: pci at 00:07.0 version: 00 width: 32 bits clock: 33MHz capabilities: isa bus_master cap_list *-communication description: Modem product: M5457 AC'97 Modem Controller vendor: ALi Corporation physical id: 8 bus info: pci at 00:08.0 version: 00 width: 32 bits clock: 33MHz capabilities: generic cap_list configuration: driver=serial resources: iomemory:d0002000-d0002fff ioport:8800-88ff irq:3 *-pcmcia description: CardBus bridge product: PCI1410 PC card Cardbus Controller vendor: Texas Instruments physical id: a bus info: pci at 00:0a.0 version: 02 width: 32 bits clock: 33MHz capabilities: pcmcia bus_master cap_list configuration: driver=yenta_cardbus resources: iomemory:24010000-24010fff irq:11 *-network description: Realtek physical id: 0 version: Rtl8139 slot: Socket 0 resources: irq:11 *-ide description: IDE interface product: M5229 IDE vendor: ALi Corporation physical id: 10 bus info: pci at 00:10.0 version: c4 width: 32 bits clock: 33MHz capabilities: ide bus_master cap_list configuration: driver=ALI15x3_IDE resources: ioport:8080-808f *-ide:0 description: IDE Channel 0 physical id: 0 bus info: ide at 0 logical name: ide0 clock: 33MHz *-disk description: ATA Disk product: ST94011A vendor: Seagate physical id: 0 bus info: ide at 0.0 logical name: /dev/hda version: 3.06 serial: 3KW1R54F size: 37GB capacity: 37GB capabilities: ata dma lba iordy smart security pm apm partitioned partitioned:dos configuration: apm=off mode=udma5 smart=on *-volume:0 description: HPFS/NTFS partition physical id: 1 bus info: ide at 0.0,1 logical name: /dev/hda1 capacity: 28GB capabilities: primary bootable *-volume:1 description: Linux filesystem partition physical id: 2 bus info: ide at 0.0,2 logical name: /dev/hda2 capacity: 8746MB capabilities: primary *-volume:2 description: Extended partition physical id: 3 bus info: ide at 0.0,3 logical name: /dev/hda3 capacity: 407MB capabilities: extended partitioned partitioned:extended *-ide:1 description: IDE Channel 1 physical id: 1 bus info: ide at 1 logical name: ide1 clock: 33MHz *-cdrom description: DVD reader product: HL-DT-STCD-RW/DVD DRIVE GCC-4241N physical id: 0 bus info: ide at 1.0 logical name: /dev/hdc version: 0C29 capabilities: packet atapi cdrom removable nonmagnetic dma lba iordy audio cd-r cd-rw dvd *-disc physical id: 0 logical name: /dev/hdc *-bridge description: Bridge product: M7101 Power Management Controller [PMU] vendor: ALi Corporation physical id: 11 bus info: pci at 00:11.0 version: 00 width: 32 bits clock: 33MHz capabilities: bridge configuration: driver=ali1535_smbus *-network description: Ethernet interface product: DP83815 (MacPhyter) Ethernet Controller vendor: National Semiconductor Corporation physical id: 12 bus info: pci at 00:12.0 logical name: eth0 version: 00 serial: 00:0e:7f:70:be:a9 size: 10MB/s capacity: 100MB/s width: 32 bits clock: 33MHz capabilities: bus_master cap_list ethernet physical tp mii fibre 10bt 10bt-fd 100bt 100bt-fd autonegociation configuration: autonegociation=on broadcast=yes driver=natsemi driverversion=1.07+LK1.0.17 duplex=half link=no multicast=yes port=twisted pair speed=10MB/s resources: ioport:8c00-8cff iomemory:d0003000-d0003fff irq:11 *-network description: Wireless interface product: RTL8180L 802.11b MAC vendor: Realtek Semiconductor Co., Ltd. physical id: 1 bus info: pci at 02:00.0 logical name: wlan0 version: 20 serial: 00:90:47:06:d1:4b width: 32 bits clock: 33MHz capabilities: bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=rtl8180 ip=192.168.1.42 multicast=yes wireless=802.11b linked resources: ioport:1000-10ff iomemory:22000000-220001ff irq:11 ** Affects: linux-source-2.6.15 (Ubuntu) Importance: Untriaged Status: Unconfirmed -- Total system freeze when starting gaim https://launchpad.net/bugs/52602 From crimsun at fungus.sh.nu Tue Jul 11 04:42:03 2006 From: crimsun at fungus.sh.nu (Daniel T Chen) Date: Tue, 11 Jul 2006 04:42:03 -0000 Subject: [Bug 52319] Re: Sound Card on Haier H51 laptop is recognised, but not functional. References: <20060708105445.19629.95757.malonedeb@gandwana.ubuntu.com> Message-ID: <20060711044204.19447.54977.malone@gandwana.ubuntu.com> There are several things to try. First, try: amixer set 'External Amplifier' off If sound is still inaudible, revert your change (unmute it). Next, try: amixer set 'Master Surround' 80%,on && amixer set 'Spread Front to Surround and Center/LFE' on If sound is still inaudible, revert the change to 'Spread Front to Surround and Center/LFE' only. Next, try: amixer set 'Exchange Front/Surround' on ** Changed in: linux-source-2.6.15 (Ubuntu) Importance: Untriaged => Low Status: Unconfirmed => Needs Info -- Sound Card on Haier H51 laptop is recognised, but not functional. https://launchpad.net/bugs/52319 From ttmrichter at gmail.com Tue Jul 11 05:38:53 2006 From: ttmrichter at gmail.com (Michael T. Richter) Date: Tue, 11 Jul 2006 05:38:53 -0000 Subject: [Bug 52319] Re: [Bug 52319] Re: Sound Card on Haier H51 laptop is recognised, but not functional. References: <20060708105445.19629.95757.malonedeb@gandwana.ubuntu.com> <20060711044204.19447.54977.malone@gandwana.ubuntu.com> Message-ID: <1152596333.8893.9.camel@localhost.localdomain> On Tue, 2006-11-07 at 04:42 +0000, Daniel T Chen wrote: > First, try: amixer set 'External Amplifier' off > If sound is still inaudible, revert your change (unmute it). Sound still inaudible. (I'm using speaker-test as the sound source. If this is inadvisable, I'll try anything else you recommend.) I'll post the exact commands I typed along with the console feedback to make sure that everything is done the way it should be done. $ amixer set 'External Amplifier' off Simple mixer control 'External Amplifier',0 Capabilities: pswitch pswitch-joined Playback channels: Mono Mono: Playback [off] $ amixer set 'External Amplifier' on Simple mixer control 'External Amplifier',0 Capabilities: pswitch pswitch-joined Playback channels: Mono Mono: Playback [on] > Next, try: amixer set 'Master Surround' 80%,on && amixer set 'Spread Front to Surround and Center/LFE' on > If sound is still inaudible, revert the change to 'Spread Front to Surround and Center/LFE' only. No sound audible. $ amixer set 'Master Surround' 80%,on && amixer set 'Spread Front to Surround and Center/LFE' on Simple mixer control 'Master Surround',0 Capabilities: pvolume pswitch Playback channels: Front Left - Front Right Limits: Playback 0 - 31 Mono: Front Left: Playback 25 [81%] [on] Front Right: Playback 31 [100%] [on] Simple mixer control 'Spread Front to Surround and Center/LFE',0 Capabilities: pswitch pswitch-joined Playback channels: Mono Mono: Playback [on] $ amixer set 'Spread Front to Surround and Center/LFE' off Simple mixer control 'Spread Front to Surround and Center/LFE',0 Capabilities: pswitch pswitch-joined Playback channels: Mono Mono: Playback [off] > Next, try: amixer set 'Exchange Front/Surround' on Still nothing going on. During this entire time, speaker-test was running and giving output like this: $ speaker-test speaker-test 0.0.8 Playback device is plughw:0,0 Stream parameters are 48000Hz, S16_LE, 1 channels Using 16 octaves of pink noise Rate set to 48000Hz (requested 48000Hz) Buffer size range from 8 to 16384 Period size range from 8 to 16384 Periods = 4 Buffer time size 2525 To choose buffer_size = 16384 To choose period_size = 4096 was set period_size = 4096 was set buffer_size = 16384 0 - Front Left Time per period = 2.646899 0 - Front Left Time per period = 2.986500 0 - Front Left Time per period = 2.986515 0 - Front Left Time per period = 2.986513 ... $ amixer set 'Exchange Front/Surround' on Simple mixer control 'Exchange Front/Surround',0 Capabilities: pswitch pswitch-joined Playback channels: Mono Mono: Playback [on] $ amixer set 'Exchange Front/Surround' off Simple mixer control 'Exchange Front/Surround',0 Capabilities: pswitch pswitch-joined Playback channels: Mono Mono: Playback [off] -- Michael T. Richter Email: ttmrichter at gmail.com, mtr1966 at hotpop.com MSN: ttmrichter at hotmail.com, mtr1966 at hotmail.com; YIM: michael_richter_1966; AIM: YanJiahua1966; ICQ: 241960658; Jabber: mtr1966 at jabber.cn "[Blacks] secrete less by the kidneys, and more by the glands of the skin, which gives them a very strong and disagreeable odour." --Thomas Jefferson -- Sound Card on Haier H51 laptop is recognised, but not functional. https://launchpad.net/bugs/52319 From jesper at krogh.cc Tue Jul 11 06:27:27 2006 From: jesper at krogh.cc (Jesper Krogh) Date: Tue, 11 Jul 2006 06:27:27 -0000 Subject: [Bug 52260] Re: Kernel does not detect all luns. References: <20060707180439.27312.28443.malonedeb@gangotri.ubuntu.com> Message-ID: <20060711062727.27312.91332.malone@gangotri.ubuntu.com> Now I've tried the above suggestion, it does not seem to solve anything on Ubuntu.. I've tried adding it: 1) In the /etc/modprobe.d and reconfiguring initrd 2) Adding it on the commandline to the kernel boot parameters. 3) Even tried the old scsi_max_luns the same way. The aic7xxx module gives this output: Jul 11 08:06:20 atlas kernel: [ 100.649227] aic7xxx: Unknown parameter `max_luns' I've tried the same process on the "scsi_mod"-module .. as tha IBM article suggests. Thus it seems as it has been renamed again or there is another parameter that interfers with this setup. Dmesg from "scsi1" the problematic controller.. [ 115.757774] scsi1 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0 [ 115.757777] [ 115.757778] aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs [ 115.757780] [ 115.758171] Vendor: Zero-D X Model: -3i Rev: 0001 [ 115.758179] Type: Direct-Access ANSI SCSI revision: 03 [ 115.758188] scsi1:A:0:0: Tagged Queuing enabled. Depth 8 [ 115.758197] target1:0:0: Beginning Domain Validation [ 115.759090] target1:0:0: wide asynchronous [ 115.759722] target1:0:0: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 31) [ 115.772156] target1:0:0: Domain Validation skipping write tests [ 115.772159] target1:0:0: Ending Domain Validation [ 115.772312] SCSI device sdb: 4294950912 512-byte hdwr sectors (2199015 MB) [ 115.772483] SCSI device sdb: drive cache: write back [ 115.772638] SCSI device sdb: 4294950912 512-byte hdwr sectors (2199015 MB) [ 115.772795] SCSI device sdb: drive cache: write back [ 115.772798] sdb: sdb1 [ 115.773159] sd 1:0:0:0: Attached scsi disk sdb [ 115.773267] scsi: host 1 channel 0 id 0 lun 0x00000200080c0400 has a LUN larger than currently supported. [ 115.773273] scsi: host 1 channel 0 id 0 lun 0xff010000ffffffff has a LUN larger than currently supported. [ 115.773494] scsi: host 1 channel 0 id 0 lun808529923 has a LUN larger than allowed by the host adapter [ 115.773879] scsi: host 1 channel 0 id 0 lun3078 has a LUN larger than allowed by the host adapter Jesper -- Kernel does not detect all luns. https://launchpad.net/bugs/52260 From ash_hooper at yahoo.com Tue Jul 11 06:27:25 2006 From: ash_hooper at yahoo.com (Ashley) Date: Tue, 11 Jul 2006 06:27:25 -0000 Subject: [Bug 36461] Re: XOrg dualhead regression References: <20060324174628.6253.87338.malonedeb@gandwana.ubuntu.com> Message-ID: <20060711062725.19629.99328.malone@gandwana.ubuntu.com> Can somebody please give a timeframe for the following: 1) when will X.org 7.2 (in which this X.org bug is fixed) reach Edgy? 2) will a patch be rolled out to existing Dapper users via APT or will we have to tell people to upgrade to Edgy to use their dualheads again? if so, when? -- XOrg dualhead regression https://launchpad.net/bugs/36461 From cjwatson at canonical.com Tue Jul 11 09:19:33 2006 From: cjwatson at canonical.com (Colin Watson) Date: Tue, 11 Jul 2006 09:19:33 -0000 Subject: [Bug 43531] Re: Kernel isn't very useful without a boot loader, but doesn't depend on one References: <445F0F3C.9090709@canonical.com> Message-ID: <20060711091933.27312.11704.malone@gangotri.ubuntu.com> Note that there is already a nobootloader installer component, so there is no need for complicated schemes involving asking the user strange questions, since the framework's already there in the installer in the event that neither grub nor lilo nor yaboot (etc.) is appropriate. nobootloader.postinst should apt-install this new no-boot-loader package. (A name that's less confusing given the existence of nobootloader would be nice, though!) -- Kernel isn't very useful without a boot loader, but doesn't depend on one https://launchpad.net/bugs/43531 From gerhard.unger at gmail.com Tue Jul 11 10:24:50 2006 From: gerhard.unger at gmail.com (Fuctinger) Date: Tue, 11 Jul 2006 10:24:50 -0000 Subject: [Bug 48556] Re: ACPI-0517: ****Error Method parse/execudion failed References: <20060605175228.5989.15658.malonedeb@gangotri.ubuntu.com> Message-ID: <20060711102450.27312.88867.malone@gangotri.ubuntu.com> The new release 2.6.15-26.44 does not fix this problem. Still have to boot with acpi=off. -- ACPI-0517: ****Error Method parse/execudion failed https://launchpad.net/bugs/48556 From cycle08 at yahoo.com Tue Jul 11 10:34:16 2006 From: cycle08 at yahoo.com (Chawnskie) Date: Tue, 11 Jul 2006 10:34:16 -0000 Subject: [Bug 48556] Re: ACPI-0517: ****Error Method parse/execudion failed References: <20060605175228.5989.15658.malonedeb@gangotri.ubuntu.com> Message-ID: <20060711103416.27312.94052.malone@gangotri.ubuntu.com> I have reproduced this bug on an ASUS s96j with the Intel 945PM chipset. -- ACPI-0517: ****Error Method parse/execudion failed https://launchpad.net/bugs/48556 From tfheen at canonical.com Tue Jul 11 10:36:58 2006 From: tfheen at canonical.com (Tollef Fog Heen) Date: Tue, 11 Jul 2006 10:36:58 -0000 Subject: [Bug 36461] Re: [Bug 36461] Re: XOrg dualhead regression References: <20060324174628.6253.87338.malonedeb@gandwana.ubuntu.com> <20060711062725.19629.99328.malone@gandwana.ubuntu.com> Message-ID: <87mzbge8c5.fsf@thosu.err.no> * Ashley | Can somebody please give a timeframe for the following: | | 1) when will X.org 7.2 (in which this X.org bug is fixed) reach Edgy? Given that Xorg 7.2 isn't scheduled until October/November, it probably won't. We might be able to backport the fix, though. | 2) will a patch be rolled out to existing Dapper users via APT or will | we have to tell people to upgrade to Edgy to use their dualheads again? | if so, when? Dualheads work fine, just not this particular configuration. If it's a small and well-contained fix, we should be able to backport it to dapper-updates. I am not sure of the time-frame as we are all insanely busy with Edgy at the moment and trying to get Ubuntu's and Debian's X packages in sync. Once that happens, we might be able to isolate the fix and apply it in Dapper. -- Tollef Fog Heen ,''`. UNIX is user friendly, it's just picky about who its friends are : :' : `. `' `- -- XOrg dualhead regression https://launchpad.net/bugs/36461 From ale.dinicola at mclink.it Tue Jul 11 11:18:21 2006 From: ale.dinicola at mclink.it (aledin) Date: Tue, 11 Jul 2006 11:18:21 -0000 Subject: [Bug 45636] Re: dapper on toshiba sat. m70: gnome immediately freezes with new kernels (incl. 2.6.15-23-386/686) References: <20060519181444.18604.677.malonedeb@gandwana.ubuntu.com> Message-ID: <20060711111821.19447.36508.malone@gandwana.ubuntu.com> Same problem with 2.6.15-26-386. Other than 2.6.15-15, the laptop works well with 2.6.16-ck12. -- dapper on toshiba sat. m70: gnome immediately freezes with new kernels (incl. 2.6.15-23-386/686) https://launchpad.net/bugs/45636 From ondrej at sury.org Tue Jul 11 11:35:56 2006 From: ondrej at sury.org (=?utf-8?b?T25kxZllaiBTdXLDvQ==?=) Date: Tue, 11 Jul 2006 11:35:56 -0000 Subject: [Bug 52546] Re: original HP keybord bundled with HP dc7600 doesn't work References: <20060710151635.27257.37195.malonedeb@gangotri.ubuntu.com> Message-ID: <20060711113556.27312.43069.launchpad@gangotri.ubuntu.com> ** Attachment added: "Dmesg output on HP dc7600 USDT" http://librarian.launchpad.net/3347410/dmesg-dc7600.txt -- original HP keybord bundled with HP dc7600 doesn't work https://launchpad.net/bugs/52546 From michael at vorlon.ping.de Tue Jul 11 11:42:33 2006 From: michael at vorlon.ping.de (Michael Bienia) Date: Tue, 11 Jul 2006 11:42:33 -0000 Subject: [Bug 52625] kernel-package should compile a kernel with -fno-stack-protector in edgy References: <20060711114233.19629.51586.malonedeb@gandwana.ubuntu.com> Message-ID: <20060711114233.19629.51586.malonedeb@gandwana.ubuntu.com> Public bug reported: gcc-4.1 in edgy has now -fstack-protector on by default. Today I tried to compile a kernel and failed. It looked like it couldn't find the stack protector functions / library. I had to add -fno-stack-protector to the other flags to compile the kernel succesfully. So either add -fno-stack-protector when building a kernel or gcc shouldn't use -fstack-protector on kernel builds (if it's possible) ** Affects: kernel-package (Ubuntu) Importance: Untriaged Status: Unconfirmed -- kernel-package should compile a kernel with -fno-stack-protector in edgy https://launchpad.net/bugs/52625 From bart at verwilst.be Tue Jul 11 13:55:58 2006 From: bart at verwilst.be (Bart Verwilst) Date: Tue, 11 Jul 2006 13:55:58 -0000 Subject: [Bug 52553] Re: Kernel panic - not syncing: IO-APIC + timer doesn't work! References: <20060710155757.27312.91477.malonedeb@gangotri.ubuntu.com> Message-ID: <20060711135558.19629.66901.malone@gandwana.ubuntu.com> I'm having the same issue.. -- Kernel panic - not syncing: IO-APIC + timer doesn't work! https://launchpad.net/bugs/52553 From bart at verwilst.be Tue Jul 11 13:59:09 2006 From: bart at verwilst.be (Bart Verwilst) Date: Tue, 11 Jul 2006 13:59:09 -0000 Subject: [Bug 52553] Re: Kernel panic - not syncing: IO-APIC + timer doesn't work! References: <20060710155757.27312.91477.malonedeb@gangotri.ubuntu.com> Message-ID: <20060711135909.19629.1470.malone@gandwana.ubuntu.com> I using noapic a valid workaround here? Or will this make some other features stop working? ( Just so i know how to avoid it for the time being :) Thanks! -- Kernel panic - not syncing: IO-APIC + timer doesn't work! https://launchpad.net/bugs/52553 From osch0001 at umn.edu Tue Jul 11 14:19:13 2006 From: osch0001 at umn.edu (osch0001) Date: Tue, 11 Jul 2006 14:19:13 -0000 Subject: [Bug 50313] Re: mounting root filesystem stuck References: <20060619100018.13137.57015.malonedeb@gandwana.ubuntu.com> Message-ID: <20060711141913.19629.96385.malone@gandwana.ubuntu.com> For me at least, this still happens on 2.6.15-26. -- mounting root filesystem stuck https://launchpad.net/bugs/50313 From Archngel at hotmail.com Tue Jul 11 14:24:46 2006 From: Archngel at hotmail.com (Archngel) Date: Tue, 11 Jul 2006 14:24:46 -0000 Subject: [Bug 38031] Re: ps/2 mouse not recognized on IBM X21 laptop References: <20060404142029.25515.90492.malonedeb@gangotri.ubuntu.com> Message-ID: <20060711142446.19629.43273.malone@gandwana.ubuntu.com> PS2 mouse 2 buttons with ball ( not optical) doesnt work on laptop IBM A20M. Tracking pointer in center of keyboard works fine. Items were working fine simultaniously on Breezy 5.10. Did fresh install (not upgrade) to Dapper 6.06, no more PS2 mouse. running kernel 2.6.15.26. -- ps/2 mouse not recognized on IBM X21 laptop https://launchpad.net/bugs/38031 From topalov1678 at online.de Tue Jul 11 15:03:21 2006 From: topalov1678 at online.de (TodTop) Date: Tue, 11 Jul 2006 15:03:21 -0000 Subject: [Bug 52649] After installing the latest Linux kernel with Update Manager, Gnome start not normal. References: <20060711150321.27257.34756.malonedeb@gangotri.ubuntu.com> Message-ID: <20060711150321.27257.34756.malonedeb@gangotri.ubuntu.com> Public bug reported: Binary package hint: linux-image-2.6.15-26-386 I Use the Update Wizard for downloading Updates. With the latest Update my Ubuntu Dapper with Gnome, install a new Ubuntu, kernel 2.6.15-26-686 & 386. That brings a Problem by starting Gnome. My Notebook start and boot normal to the Login Screen, then Gnome try to start and hangs by loading the Desktop. From the Login Screen repeating a Ubuntu Sound immediately. When I boot with 2.6.15-25-686 kernel everything works normal. (AMILO L7300 Notebook Celeron M360, 400MHz FSB, 1,4GHz, 1 MB 2nd level cache, 2x 256 MB DDR 400 SDRAM HDD 60 GB IDE, Multi format DVD burner with double layer support 15" LCD XGA, 1024x768 pixels UniChrome Pro 3D/2D: up to 64MB shared graphics integrated in VIA PN800 WLAN 802. 11 b/g speeds up to 54Mbps Ubuntu 6.06 LTS Dapper Drake) ** Affects: linux-source-2.6.15 (Ubuntu) Importance: Untriaged Status: Unconfirmed -- After installing the latest Linux kernel with Update Manager, Gnome start not normal. https://launchpad.net/bugs/52649 From osch0001 at umn.edu Tue Jul 11 15:06:46 2006 From: osch0001 at umn.edu (osch0001) Date: Tue, 11 Jul 2006 15:06:46 -0000 Subject: [Bug 35174] Re: ThinkPad X60 cannot Resume from Suspend References: <20060316100325.6510.84147.malonedeb@gangotri.ubuntu.com> Message-ID: <20060711150646.19447.77521.malone@gandwana.ubuntu.com> After testing it several times, resuming from suspend seems to work well for my X60s after upgrading to 2.6.15-26. -- ThinkPad X60 cannot Resume from Suspend https://launchpad.net/bugs/35174 From gav at gavinchappell.co.uk Tue Jul 11 15:29:19 2006 From: gav at gavinchappell.co.uk (Gavin Chappell) Date: Tue, 11 Jul 2006 15:29:19 -0000 Subject: [Bug 37784] Re: sky2 ethernet driver is freezing on big upload References: <20060402235408.5441.13560.malonedeb@gangotri.ubuntu.com> Message-ID: <20060711152919.19447.12552.malone@gandwana.ubuntu.com> Upgraded to 2.6.15-26-686 (sky2 ver 1.4 again), same problem, just so you know... -- sky2 ethernet driver is freezing on big upload https://launchpad.net/bugs/37784 From kgad at post.tau.ac.il Tue Jul 11 15:29:40 2006 From: kgad at post.tau.ac.il (ZZZ) Date: Tue, 11 Jul 2006 15:29:40 -0000 Subject: [Bug 35174] Re: ThinkPad X60 cannot Resume from Suspend References: <20060316100325.6510.84147.malonedeb@gangotri.ubuntu.com> Message-ID: <20060711152940.19447.56123.malone@gandwana.ubuntu.com> But the current version of Ubuntu Dapper kernel is 2.6.15-23-686, still far from 2.6.15-26. So even if does work on 2.6.15-26, it doesn't help. -- ThinkPad X60 cannot Resume from Suspend https://launchpad.net/bugs/35174 From ben.collins at ubuntu.com Tue Jul 11 15:45:38 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Tue, 11 Jul 2006 15:45:38 -0000 Subject: [Bug 52302] Re: [Bug 52302] Re: Intel Pro Wireless 3945 is not detected with latest kernel update References: <20060708063621.27257.43382.malonedeb@gangotri.ubuntu.com> <20060711033635.19447.35270.malone@gandwana.ubuntu.com> Message-ID: <1152632738.4773.164.camel@grayson> On Tue, 2006-07-11 at 03:36 +0000, Vijay Kiran Kamuju wrote: > Sorry I gave some wrong info > It works with 2.6.15.23 > but does not work with 2.6.15.25 > well my ifconfig output on 2.6.15.23 before connecting to wireless network sudo apt-get install linux-686 PLEASE, make sure you have the linux-restricted-modules package installed that matches your kernel. -- Intel Pro Wireless 3945 is not detected with latest kernel update https://launchpad.net/bugs/52302 From ben.collins at ubuntu.com Tue Jul 11 15:48:58 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Tue, 11 Jul 2006 15:48:58 -0000 Subject: [Bug 35174] Re: ThinkPad X60 cannot Resume from Suspend References: <20060316100325.6510.84147.malonedeb@gangotri.ubuntu.com> Message-ID: <20060711154859.19629.81975.malone@gandwana.ubuntu.com> No, the current version in Ubuntu dapper-security is -26. Which will be included in the first point release. I'll close the bug, thanks. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Confirmed => Fix Released -- ThinkPad X60 cannot Resume from Suspend https://launchpad.net/bugs/35174 From ben.collins at ubuntu.com Tue Jul 11 15:50:47 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Tue, 11 Jul 2006 15:50:47 -0000 Subject: [Bug 52625] Re: kernel-package should compile a kernel with -fno-stack-protector in edgy References: <20060711114233.19629.51586.malonedeb@gandwana.ubuntu.com> Message-ID: <20060711155047.19447.21522.malone@gandwana.ubuntu.com> kernel-package does not choose compile time options. This is the responsibility of the kernel. There is a patch in recent kernels that includes -fno-stack-protector, and the Ubuntu kernel itself supports this aswell. To avoid it, install gcc-4.0, and set CC=gcc-4.0. Or add the flags manually to the kernel Makefile. ** Changed in: kernel-package (Ubuntu) Status: Unconfirmed => Rejected -- kernel-package should compile a kernel with -fno-stack-protector in edgy https://launchpad.net/bugs/52625 From jos_dehaes at fastmail.fm Tue Jul 11 16:23:50 2006 From: jos_dehaes at fastmail.fm (Jos Dehaes) Date: Tue, 11 Jul 2006 16:23:50 -0000 Subject: [Bug 50031] Re: [regression] Suspend [to-RAM and to-disk] is broken in 2.6.15-25.43 References: <20060616182146.13137.51951.malonedeb@gandwana.ubuntu.com> Message-ID: <20060711162350.19629.65497.malone@gandwana.ubuntu.com> I have similar issues with Dell Latitude D820. -- [regression] Suspend [to-RAM and to-disk] is broken in 2.6.15-25.43 https://launchpad.net/bugs/50031 From kgad at post.tau.ac.il Tue Jul 11 16:52:39 2006 From: kgad at post.tau.ac.il (ZZZ) Date: Tue, 11 Jul 2006 16:52:39 -0000 Subject: [Bug 35174] Re: ThinkPad X60 cannot Resume from Suspend References: <20060316100325.6510.84147.malonedeb@gangotri.ubuntu.com> Message-ID: <20060711165239.19447.93312.malone@gandwana.ubuntu.com> I think you should wait before closing the bug so soon. Testing several times is not enough. I would wait for 2.6.15-26 to be updated, and then hear the users feedback. If changing to 2.6.15-26 helps, you'll know it. -- ThinkPad X60 cannot Resume from Suspend https://launchpad.net/bugs/35174 From h.sokolowski at huamisoft.com Tue Jul 11 16:53:39 2006 From: h.sokolowski at huamisoft.com (huamisoft) Date: Tue, 11 Jul 2006 16:53:39 -0000 Subject: [Bug 17497] Re: Does not support rev.B1 of DLink DWL-G650+ (missing firmware) References: <20060113135153.21012.79669.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060711165339.27312.85365.malone@gangotri.ubuntu.com> hi! it hasn't been fixed in dapper for the latest kernel (2.6.15-26-k7). to fix the problem you have to change directory 1.2.1.34 to default in /lib/firmware/2.6.15-26-k7/acx and reload acx module so it can load proper firmware. regards hs -- Does not support rev.B1 of DLink DWL-G650+ (missing firmware) https://launchpad.net/bugs/17497 From rengarajan_iyengar at hotmail.com Tue Jul 11 17:46:51 2006 From: rengarajan_iyengar at hotmail.com (Rengarajan) Date: Tue, 11 Jul 2006 17:46:51 -0000 Subject: [Bug 52666] DVD burning is extremely slow References: <20060711174651.19629.28863.malonedeb@gandwana.ubuntu.com> Message-ID: <20060711174651.19629.28863.malonedeb@gandwana.ubuntu.com> Public bug reported: Binary package hint: linux-source-2.6.15 I have a Plextor PX-750UF USB/IEEE 1394 drive. It can burn DVD+Rs at 16x speed. When I tried to burn a 16x RITEK DVD it took about 45 minutes (the size of the ISO is about 4 GB). The same ISO burns under 6 minutes on Microsoft Windows with Nero 6. I tried both GnomeBaker and nautilus-cd-burner. The same behavior is exhibited by both USB and IEEE 1394. Also I noticed that after the burning started my system is left with only 49 MB of free memory (reported by top command) out of the 2 GB my system has. I don't know if this has anything to with it but wanted to report it anyway. I am running Ubuntu Dapper 6.06 LTS on a Dell D610 2.1GHz processor 2G RAM and 80GB harddisk. Let me know if you need further information. Thanks, Rajan ** Affects: linux-source-2.6.15 (Ubuntu) Importance: Untriaged Status: Unconfirmed -- DVD burning is extremely slow https://launchpad.net/bugs/52666 From ben.collins at ubuntu.com Tue Jul 11 18:00:59 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Tue, 11 Jul 2006 18:00:59 -0000 Subject: [Bug 52666] Re: [Bug 52666] DVD burning is extremely slow References: <20060711174651.19629.28863.malonedeb@gandwana.ubuntu.com> Message-ID: <1152640859.4773.178.camel@grayson> Are you sure that the DVD media you are burning to supports 16x? -- DVD burning is extremely slow https://launchpad.net/bugs/52666 From matt at modestolan.com Tue Jul 11 18:24:20 2006 From: matt at modestolan.com (Matt Thrailkill) Date: Tue, 11 Jul 2006 18:24:20 -0000 Subject: [Bug 31219] Re: USB stack dies when I disconnect my mobile phone's USB cable References: <20060212122502.1195.20135.malonedeb@gandwana.ubuntu.com> Message-ID: <20060711182420.19629.64560.malone@gandwana.ubuntu.com> Actually my old comment is wrong, this only happens when I unplug my phone. I emailed my dmesg to a Redhat kernel dev I know, and this is what he said: > Here is a copy of what is in /var/log/syslog when I unplug my phone from > my laptop w/ the latest ubuntu kernel. > Jun 26 01:55:04 localhost kernel: [17180317.156000] kernel BUG at kernel/workqueue.c:109! > Jun 26 01:55:04 localhost kernel: [17180317.156000] invalid operand: 0000 [#1] > Jun 26 01:55:04 localhost kernel: [17180317.156000] PREEMPT SMP > Jun 26 01:55:04 localhost kernel: [17180317.156000] EFLAGS: 00010202 (2.6.15-25-686) > Jun 26 01:55:04 localhost kernel: [17180317.156000] [pg0+434898390/1069184000] usb_serial_disconnect+0x56/0xd0 [usbserial] It's only going to be fixed months from now, I'm afraid. My patch is only going to be complete in 2.6.18 pre, and when Ubuntu picks it is anyone's guess. -- Pete He also said this: > Here is a copy of what is in /var/log/syslog when I unplug my phone from > my laptop w/ the latest ubuntu kernel. I knew about it before. Here's what Linus accepted already: http://www.kernel.org/git/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commitdiff;h=2f8ad9a1b91bc6856860a2fea8b07e0c82c0ad0a Unfortunately, it's not complete, there's a follow-up patch queued: http://ftp.kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/gregkh-04-usb /usb-fix-usb-serial-leaks-oopses-on-disconnect.patch BTW, it's not cdc-acm. Note that usb_serial_disconnect was in the traceback. -- Pete 2.6.18-rc1 came out recently, I hope someone can backport the fix (if it exists) from there into the current Ubuntu kernels. Otherwise, every time I unplug my phone I have to reboot to dial out with it or connect any other usb device again. -- USB stack dies when I disconnect my mobile phone's USB cable https://launchpad.net/bugs/31219 From ubuntu at alex.org.uk Tue Jul 11 18:41:34 2006 From: ubuntu at alex.org.uk (Alex Bligh) Date: Tue, 11 Jul 2006 18:41:34 -0000 Subject: [Bug 35174] Re: ThinkPad X60 cannot Resume from Suspend References: <20060316100325.6510.84147.malonedeb@gangotri.ubuntu.com> Message-ID: <20060711184134.19447.38068.malone@gandwana.ubuntu.com> This is NOT fixed at least on a T60p (my T60p bug was duped to this one), with Dapper security updates including 2.6.15-26. On hitting suspend, the flashing "moon" indicator appears, and the system appears to suspend, with the LCD switching off. However, it soon switches back on, and goes to the Ubuntu login prompt (as if X has been restarted). Then doing anything (such as a VT switch) repeatedly restarts X in a similar way, so you always end up with a pause, the drum-roll, and the Ubuntu login screen. -- ThinkPad X60 cannot Resume from Suspend https://launchpad.net/bugs/35174 From ubuntu at alex.org.uk Tue Jul 11 18:43:50 2006 From: ubuntu at alex.org.uk (Alex Bligh) Date: Tue, 11 Jul 2006 18:43:50 -0000 Subject: [Bug 35174] Re: ThinkPad X60 cannot Resume from Suspend References: <20060316100325.6510.84147.malonedeb@gangotri.ubuntu.com> Message-ID: <20060711184350.19629.69319.malone@gandwana.ubuntu.com> For completeness, hibernate doesn't work either. The same thing happens, pretty much exactly. -- ThinkPad X60 cannot Resume from Suspend https://launchpad.net/bugs/35174 From maricidfu at gmail.com Tue Jul 11 18:42:12 2006 From: maricidfu at gmail.com (jhort) Date: Tue, 11 Jul 2006 18:42:12 -0000 Subject: [Bug 26119] Re: Possible fake host protected area (hpa) detected in ide drive causing SectorIdNotFound References: <20060113144800.21012.37276.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060711184212.19629.51952.malone@gandwana.ubuntu.com> I have the same problem. I use Ubuntu Dapper with kernel 2.6.15-25-686. My hard disk is a ST340823A. I have the same error than Jorge Juan, in the same sector, 78165360. I think that the error appears in all ST340823A hard disks. Excuse my poor english. -- Possible fake host protected area (hpa) detected in ide drive causing SectorIdNotFound https://launchpad.net/bugs/26119 From osch0001 at umn.edu Tue Jul 11 19:00:14 2006 From: osch0001 at umn.edu (osch0001) Date: Tue, 11 Jul 2006 19:00:14 -0000 Subject: [Bug 35174] Re: [Bug 35174] Re: ThinkPad X60 cannot Resume from Suspend References: <20060316100325.6510.84147.malonedeb@gangotri.ubuntu.com> <20060711184134.19447.38068.malone@gandwana.ubuntu.com> Message-ID: <44B3F53E.3030004@umn.edu> Alex, That sounds like a different bug. This bug was about failure to resume from a successful suspend, while yours seems to be about a failure suspending. Greg -- ThinkPad X60 cannot Resume from Suspend https://launchpad.net/bugs/35174 From bacam at z273.org.uk Tue Jul 11 19:22:01 2006 From: bacam at z273.org.uk (Brian Campbell) Date: Tue, 11 Jul 2006 19:22:01 -0000 Subject: [Bug 52679] Linux upgrade doesn't update symlinks used by yaboot References: <20060711192201.27257.9057.malonedeb@gangotri.ubuntu.com> Message-ID: <20060711192201.27257.9057.malonedeb@gangotri.ubuntu.com> Public bug reported: Binary package hint: linux-image-2.6.15-26-powerpc The Linux kernel upgrades for dapper quietly fail because they update the initrd.img and vmlinux symlinks in /, but not the ones in /boot which yaboot uses. The result is that after reboot I'm still using the old (vulnerable) kernel. This copy of dapper was a fresh install just after dapper came out, and /etc/yaboot.conf hasn't been altered by hand - it always referred to /boot/initrd.img and /boot/vmlinux (and .old symlinks, which don't exist). ** Affects: linux-source-2.6.15 (Ubuntu) Importance: Untriaged Status: Unconfirmed -- Linux upgrade doesn't update symlinks used by yaboot https://launchpad.net/bugs/52679 From mdz at ubuntu.com Tue Jul 11 19:41:55 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Tue, 11 Jul 2006 19:41:55 -0000 Subject: [Bug 52679] Re: [Bug 52679] Linux upgrade doesn't update symlinks used by yaboot References: <20060711192201.27257.9057.malonedeb@gangotri.ubuntu.com> Message-ID: <20060711194155.GA8774@alcor.net> On Tue, Jul 11, 2006 at 07:22:01PM -0000, Brian Campbell wrote: > Public bug reported: > > Binary package hint: linux-image-2.6.15-26-powerpc > > The Linux kernel upgrades for dapper quietly fail because they update > the initrd.img and vmlinux symlinks in /, but not the ones in /boot > which yaboot uses. The result is that after reboot I'm still using the > old (vulnerable) kernel. > > This copy of dapper was a fresh install just after dapper came out, and > /etc/yaboot.conf hasn't been altered by hand - it always referred to > /boot/initrd.img and /boot/vmlinux (and .old symlinks, which don't > exist). What's in /etc/kernel-img.conf? Perhaps you edited it? -- - mdz -- Linux upgrade doesn't update symlinks used by yaboot https://launchpad.net/bugs/52679 From bacam at z273.org.uk Tue Jul 11 19:56:56 2006 From: bacam at z273.org.uk (Brian Campbell) Date: Tue, 11 Jul 2006 19:56:56 -0000 Subject: [Bug 52679] Re: [Bug 52679] Re: [Bug 52679] Linux upgrade doesn't update symlinks used by yaboot References: <20060711192201.27257.9057.malonedeb@gangotri.ubuntu.com> <20060711194155.GA8774@alcor.net> Message-ID: <20060711195656.GA6133@z273.org.uk> On Tue, Jul 11, 2006 at 07:41:55PM -0000, Matt Zimmerman wrote: > > What's in /etc/kernel-img.conf? Perhaps you edited it? do_symlinks = yes relative_links = yes do_bootloader = no do_bootfloppy = no do_initrd = yes link_in_boot = no I haven't changed it, I didn't even know about it. Presumably link_in_boot should be yes? Brian -- Linux upgrade doesn't update symlinks used by yaboot https://launchpad.net/bugs/52679 From ben.collins at ubuntu.com Tue Jul 11 20:08:54 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Tue, 11 Jul 2006 20:08:54 -0000 Subject: [Bug 52679] Re: Linux upgrade doesn't update symlinks used by yaboot References: <20060711192201.27257.9057.malonedeb@gangotri.ubuntu.com> Message-ID: <20060711200854.19447.89901.malone@gandwana.ubuntu.com> Yeah, link_in_boot should be yes for your purposed. Perhaps something else changed it on your system without your knowledge, but nothing in dapper should have done that. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Unconfirmed => Rejected -- Linux upgrade doesn't update symlinks used by yaboot https://launchpad.net/bugs/52679 From ubuntu at alex.org.uk Tue Jul 11 20:14:12 2006 From: ubuntu at alex.org.uk (Alex Bligh) Date: Tue, 11 Jul 2006 20:14:12 -0000 Subject: [Bug 52689] Multi-minute hang on boot on IBM T60p References: <20060711201412.27257.3468.malonedeb@gangotri.ubuntu.com> Message-ID: <20060711201412.27257.3468.malonedeb@gangotri.ubuntu.com> Public bug reported: I've opened this in a different bug as I reported in a long thread in Bug #35174 and it hasn't been fixed. I am using 2.6.15-26 and acpitools 0.85. Hope the following is sufficient (there is a short hang and a long hang). If not I have the complete dmesg. This is a boot log I took a little while ago but it is still doing it in the same place on today's Dapper. IBM T60p. Alex File Edit Options Buffers Tools Help [17179570.640000] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) [17179570.640000] ACPI: Processor [CPU1] (supports 8 throttling states) [17179570.644000] ACPI: Thermal Zone [THM0] (61 C) [17179570.644000] ACPI: Thermal Zone [THM1] (61 C) [17179570.956000] ICH7: IDE controller at PCI slot 0000:00:1f.1 [17179570.956000] ACPI: PCI Interrupt 0000:00:1f.1[C] -> GSI 16 (level, low) -> IRQ 169 [17179570.956000] ICH7: chipset revision 2 [17179570.956000] ICH7: not 100% native mode: will probe irqs later [17179570.956000] ide0: BM-DMA at 0x1880-0x1887, BIOS settings: hda:DMA, hdb:pio [17179570.956000] Probing IDE interface ide0... SHORT HANG HERE [17179576.424000] hda: HL-DT-ST DVDRAM GSA-4083N, ATAPI CD/DVD-ROM drive [17179578.888000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [17179578.896000] hda: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33) [17179578.896000] Uniform CD-ROM driver Revision: 3.20 [17179579.184000] SCSI subsystem initialized [17179579.188000] ACPI: bus type scsi registered [17179579.188000] libata version 1.20 loaded. [17179579.188000] ahci 0000:00:1f.2: version 1.2 [17179579.188000] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 16 (level, low) -> IRQ 169 LONG HANG HERE [17179666.844000] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [17179666.844000] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x1 impl SATA mode [17179666.844000] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part [17179666.844000] ata1: SATA max UDMA/133 cmd 0xF884C500 ctl 0x0 bmdma 0x0 irq 66 [17179666.844000] ata2: SATA max UDMA/133 cmd 0xF884C580 ctl 0x0 bmdma 0x0 irq 66 [17179666.844000] ata3: SATA max UDMA/133 cmd 0xF884C600 ctl 0x0 bmdma 0x0 irq 66 [17179666.844000] ata4: SATA max UDMA/133 cmd 0xF884C680 ctl 0x0 bmdma 0x0 irq 66 ** Affects: linux-source-2.6.15 (Ubuntu) Importance: Untriaged Status: Unconfirmed -- Multi-minute hang on boot on IBM T60p https://launchpad.net/bugs/52689 From mdz at ubuntu.com Tue Jul 11 20:12:52 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Tue, 11 Jul 2006 20:12:52 -0000 Subject: [Bug 52679] Re: Linux upgrade doesn't update symlinks used by yaboot References: <20060711192201.27257.9057.malonedeb@gangotri.ubuntu.com> <20060711194155.GA8774@alcor.net> <20060711195656.GA6133@z273.org.uk> Message-ID: <20060711201252.GB8774@alcor.net> On Tue, Jul 11, 2006 at 07:56:56PM -0000, Brian Campbell wrote: > On Tue, Jul 11, 2006 at 07:41:55PM -0000, Matt Zimmerman wrote: > > > > What's in /etc/kernel-img.conf? Perhaps you edited it? > > do_symlinks = yes > relative_links = yes > do_bootloader = no > do_bootfloppy = no > do_initrd = yes > link_in_boot = no > > I haven't changed it, I didn't even know about it. Presumably > link_in_boot should be yes? Yes, and that's the default on new installs, at least in recent tests on i386. -- - mdz ** This bug is no longer flagged as a security issue -- Linux upgrade doesn't update symlinks used by yaboot https://launchpad.net/bugs/52679 From ben.collins at ubuntu.com Tue Jul 11 20:35:38 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Tue, 11 Jul 2006 20:35:38 -0000 Subject: [Bug 52546] Re: original HP keybord bundled with HP dc7600 doesn't work References: <20060710151635.27257.37195.malonedeb@gangotri.ubuntu.com> Message-ID: <20060711203538.19447.80961.malone@gandwana.ubuntu.com> So you normally have psmouse loaded? Run this command: lsmod | grep psmouse Generally, this is force loaded via an entry in /etc/modules, which is added there from installer. I suspect you are just missing psmouse as a module, and that connecting the USBPS2 adapter is causing the module to be autoloaded. If it is not present in /etc/modules, then add it there. Rejecting the bug report. Please set the status to Confirmed if this is not the case. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Needs Info => Rejected -- original HP keybord bundled with HP dc7600 doesn't work https://launchpad.net/bugs/52546 From ondrej at sury.org Tue Jul 11 20:54:57 2006 From: ondrej at sury.org (=?utf-8?b?T25kxZllaiBTdXLDvQ==?=) Date: Tue, 11 Jul 2006 20:54:57 -0000 Subject: [Bug 52546] Re: original HP keybord bundled with HP dc7600 doesn't work References: <20060710151635.27257.37195.malonedeb@gangotri.ubuntu.com> Message-ID: <20060711205457.19629.59788.malone@gandwana.ubuntu.com> Shouldn't that "just work"(tm)? Ubuntu cannot be installed on such computer, because keyboard doesn't work at installation time and need that workaround with usbps2 convertor. -- original HP keybord bundled with HP dc7600 doesn't work https://launchpad.net/bugs/52546 From lzap at seznam.cz Tue Jul 11 20:50:53 2006 From: lzap at seznam.cz (=?utf-8?q?Luk=C3=A1=C5=A1_Zapletal?=) Date: Tue, 11 Jul 2006 20:50:53 -0000 Subject: [Bug 34831] Re: Hardlock of entire system (Dapper Flight 5) References: <20060314003317.30057.9117.malonedeb@gandwana.ubuntu.com> Message-ID: <20060711205053.19629.52987.malone@gandwana.ubuntu.com> I confirm this with 2.6.15-25-k7 -- Hardlock of entire system (Dapper Flight 5) https://launchpad.net/bugs/34831 From lzap at seznam.cz Tue Jul 11 20:55:17 2006 From: lzap at seznam.cz (=?utf-8?q?Luk=C3=A1=C5=A1_Zapletal?=) Date: Tue, 11 Jul 2006 20:55:17 -0000 Subject: [Bug 34831] Re: Hardlock of entire system (Dapper Flight 5) References: <20060314003317.30057.9117.malonedeb@gandwana.ubuntu.com> Message-ID: <20060711205517.27312.42703.malone@gangotri.ubuntu.com> So when this will be fixed in Dapper? Is it the new -26 kernel or must we wait? Thanks for info... -- Hardlock of entire system (Dapper Flight 5) https://launchpad.net/bugs/34831 From rengarajan_iyengar at hotmail.com Tue Jul 11 21:01:27 2006 From: rengarajan_iyengar at hotmail.com (Rengarajan) Date: Tue, 11 Jul 2006 21:01:27 -0000 Subject: [Bug 52666] Re: DVD burning is extremely slow References: <20060711174651.19629.28863.malonedeb@gandwana.ubuntu.com> Message-ID: <20060711210127.27312.46692.malone@gangotri.ubuntu.com> Yes it does. As you can see from my bug description that I can burn the same ISO in the same media within 6 minutes in Windows (which is the expected time for a 16x DVD+R). -- DVD burning is extremely slow https://launchpad.net/bugs/52666 From ben.collins at ubuntu.com Tue Jul 11 21:28:36 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Tue, 11 Jul 2006 21:28:36 -0000 Subject: [Bug 52553] Re: Kernel panic - not syncing: IO-APIC + timer doesn't work! References: <20060710155757.27312.91477.malonedeb@gangotri.ubuntu.com> Message-ID: <20060711212836.19629.39662.malone@gandwana.ubuntu.com> You need to confirm that this actually fixes your problem. The problem I see described in the above links are related to crashdump (kexec/kdump interaction), which seems nothing like what you are describing. Also, the fix is in x86_64, which wont affect the -686 kernel image, nor would it fix a CoreDuo system. Did you try booting with "noapic"? ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Unconfirmed => Needs Info -- Kernel panic - not syncing: IO-APIC + timer doesn't work! https://launchpad.net/bugs/52553 From kgad at post.tau.ac.il Tue Jul 11 21:28:10 2006 From: kgad at post.tau.ac.il (ZZZ) Date: Tue, 11 Jul 2006 21:28:10 -0000 Subject: [Bug 50313] Re: mounting root filesystem stuck References: <20060619100018.13137.57015.malonedeb@gandwana.ubuntu.com> Message-ID: <20060711212810.27257.51614.malone@gangotri.ubuntu.com> For me also, the same problem still exists on 2.6.15-26. -- mounting root filesystem stuck https://launchpad.net/bugs/50313 From ben.collins at ubuntu.com Tue Jul 11 21:25:12 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Tue, 11 Jul 2006 21:25:12 -0000 Subject: [Bug 34831] Re: Hardlock of entire system (Dapper Flight 5) References: <20060314003317.30057.9117.malonedeb@gandwana.ubuntu.com> Message-ID: <20060711212512.19447.76018.malone@gandwana.ubuntu.com> It is in the new -26 -- Hardlock of entire system (Dapper Flight 5) https://launchpad.net/bugs/34831 From albrecht.gebhardt at uni-klu.ac.at Tue Jul 11 21:28:34 2006 From: albrecht.gebhardt at uni-klu.ac.at (Albrecht Gebhardt) Date: Tue, 11 Jul 2006 21:28:34 -0000 Subject: [Bug 33030] Re: No SATA support for VIA VT8251 (e.g. on ASUS A8V MX) References: <20060227120715.16638.76305.malonedeb@gandwana.ubuntu.com> Message-ID: <20060711212834.27257.95027.malone@gangotri.ubuntu.com> now it looks good, kernel 2.6.15 rel 26.44 detects and uses my SATA disks: ... [17179573.256000] sata_via 0000:00:0f.0: version 1.1 [17179573.256000] ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 21 (level, low) -> IRQ 193 [17179573.256000] ConfigSpace offset 49H: 0xa0 [17179573.256000] sata_via 0000:00:0f.0: routed to hard irq line 10 [17179573.256000] ata1: PATA max UDMA/133 cmd 0xEC00 ctl 0xE882 bmdma 0xE400 irq 193 [17179573.256000] ata2: PATA max UDMA/133 cmd 0xE800 ctl 0xE482 bmdma 0xE408 irq 193 [17179574.472000] ata1: dev 0 cfg 00:0c5a 49:2f00 82:346b 83:7d01 84:4003 85:3469 86:3c01 87:4003 88:407f 93:0000 [17179574.472000] ata1: dev 0 ATA-6, max UDMA/133, 156301488 sectors: LBA48 [17179574.472000] sata_get_dev_handle: SATA dev addr=0xf0000, handle=0xdffe9ae0 [17179574.476000] ata1: dev 0 configured for UDMA/133 [17179574.476000] sata_get_dev_handle: SATA dev addr=0xf0000, handle=0xdffe9ae0 [17179574.480000] scsi0 : sata_via [17179575.696000] ata2: dev 0 cfg 00:0c5a 49:2f00 82:346b 83:7d01 84:4003 85:3469 86:3c01 87:4003 88:407f 93:0000 [17179575.696000] ata2: dev 0 ATA-6, max UDMA/133, 156301488 sectors: LBA48 [17179575.696000] sata_get_dev_handle: SATA dev addr=0xf0000, handle=0xdffe9ae0 [17179575.700000] ata2: dev 0 configured for UDMA/133 [17179575.700000] sata_get_dev_handle: SATA dev addr=0xf0000, handle=0xdffe9ae0 [17179575.704000] scsi1 : sata_via [17179575.704000] Vendor: ATA Model: ST380817AS Rev: 3.42 [17179575.704000] Type: Direct-Access ANSI SCSI revision: 05 [17179575.704000] Vendor: ATA Model: ST380817AS Rev: 3.42 [17179575.708000] Type: Direct-Access ANSI SCSI revision: 05 [17179575.716000] Driver 'sd' needs updating - please use bus_type methods [17179575.716000] SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB) [17179575.716000] SCSI device sda: drive cache: write back ... Albrecht -- No SATA support for VIA VT8251 (e.g. on ASUS A8V MX) https://launchpad.net/bugs/33030 From ben.collins at ubuntu.com Tue Jul 11 21:33:10 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Tue, 11 Jul 2006 21:33:10 -0000 Subject: [Bug 38278] Re: wifi card don't work. isl3886 is required but not installed References: <20060405203926.24486.7083.malonedeb@gangotri.ubuntu.com> Message-ID: <20060711213310.27312.88111.launchpad@gangotri.ubuntu.com> ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Confirmed => Fix Committed -- wifi card don't work. isl3886 is required but not installed https://launchpad.net/bugs/38278 From ash_hooper at yahoo.com Tue Jul 11 21:32:42 2006 From: ash_hooper at yahoo.com (Ashley) Date: Tue, 11 Jul 2006 21:32:42 -0000 Subject: [Bug 36461] Re: [Bug 36461] Re: [Bug 36461] Re: XOrg dualhead regression References: <20060324174628.6253.87338.malonedeb@gandwana.ubuntu.com> <20060711062725.19629.99328.malone@gandwana.ubuntu.com> <87mzbge8c5.fsf@thosu.err.no> Message-ID: <20060711213242.78954.qmail@web60820.mail.yahoo.com> --- Tollef Fog Heen wrote: > | Can somebody please give a timeframe for the following: > | > | 1) when will X.org 7.2 (in which this X.org bug is fixed) reach Edgy? > > Given that Xorg 7.2 isn't scheduled until October/November, it > probably won't. We might be able to backport the fix, though. OK, to my knowledge several other distros have backported this fix (Novell for one) - this would be ideal if 7.2 won't release until Edgy+1. > | 2) will a patch be rolled out to existing Dapper users via APT or will > | we have to tell people to upgrade to Edgy to use their dualheads again? > | if so, when? > > Dualheads work fine, just not this particular configuration. If it's > a small and well-contained fix, we should be able to backport it to > dapper-updates. I am not sure of the time-frame as we are all > insanely busy with Edgy at the moment and trying to get Ubuntu's and > Debian's X packages in sync. Once that happens, we might be able to > isolate the fix and apply it in Dapper. That would be greatly appreciated. It would appear that a great many people are affected - in fact it sounds like most people who have onboard VGA and/or 2 cards from different vendors encounter this problem. ATI appears to be especially problematic. I already offered my services to the xserver-xorg maintainers to see if there was some way I might be able to help but received no response. Thanks for investigating. Cheers Ashley -- "We do not inherit the earth from our ancestors; ...-- __@ we borrow it from our children" ....--- _\<,_ -- Antoine de St. Exupery (_) (_) http://backtobreath.com/ ___________________________________________________________ The all-new Yahoo! Mail goes wherever you go - free your email address from your Internet provider. http://uk.docs.yahoo.com/nowyoucan.html -- XOrg dualhead regression https://launchpad.net/bugs/36461 From kgad at post.tau.ac.il Tue Jul 11 21:32:49 2006 From: kgad at post.tau.ac.il (ZZZ) Date: Tue, 11 Jul 2006 21:32:49 -0000 Subject: [Bug 35174] Re: ThinkPad X60 cannot Resume from Suspend References: <20060316100325.6510.84147.malonedeb@gangotri.ubuntu.com> Message-ID: <20060711213249.19447.99512.malone@gandwana.ubuntu.com> I updated to the new kernel. I didn't try enough times to conclude wheather the bug is solved. In any case, if we suppose it is solved, you basically switched this bug with another one: https://launchpad.net/bugs/50313 . Now it takes me almost 10 minutes to open the laptop (when I show it to someone that has Windows, he laughs at me...). This bug did not exist in the old kernel version. -- ThinkPad X60 cannot Resume from Suspend https://launchpad.net/bugs/35174 From bacam at z273.org.uk Tue Jul 11 21:41:18 2006 From: bacam at z273.org.uk (Brian Campbell) Date: Tue, 11 Jul 2006 21:41:18 -0000 Subject: [Bug 52679] Re: [Bug 52679] Re: Linux upgrade doesn't update symlinks used by yaboot References: <20060711192201.27257.9057.malonedeb@gangotri.ubuntu.com> <20060711200854.19447.89901.malone@gandwana.ubuntu.com> Message-ID: <20060711214117.GA4837@z273.org.uk> On Tue, Jul 11, 2006 at 08:08:54PM -0000, Ben Collins wrote: > Yeah, link_in_boot should be yes for your purposed. Perhaps something > else changed it on your system without your knowledge, but nothing in > dapper should have done that. What writes the initial /etc/kernel-img.conf? It doesn't appear to be owned by any package, and the copy on the dapper powerpc live CD I have is the same as the installed one. I can't think of anything installed that would alter it. -- Linux upgrade doesn't update symlinks used by yaboot https://launchpad.net/bugs/52679 From info at jensberke.de Tue Jul 11 21:54:42 2006 From: info at jensberke.de (Jens Berke) Date: Tue, 11 Jul 2006 21:54:42 -0000 Subject: [Bug 52703] Jerky video/DVD playback since kernel update References: <20060711215442.27257.14086.malonedeb@gangotri.ubuntu.com> Message-ID: <20060711215442.27257.14086.malonedeb@gangotri.ubuntu.com> Public bug reported: Binary package hint: linux-image-2.6.15-26-686 I have ubuntu 6.06 installed (no upgrade from Breezy). All packages are from the ubuntu repositories (and very few from PLF). No drivers compiled by myself. System: IBM Thinkpad R52 with an ATI Radeon Mobility M300 Updating from kernel 2.6.15-23 to 2.6.15-25 created a few problems, which still exist in 2.6.15-26: * DVD and video playback is choppy / jerky (no matter which player I use). This makes the latest kernel useless for me and I've kept using 2.6.15-23 instead. * Rhythmbox hangs very often when starting (while checking the music library) * When you have an application starter on a panel and click it, there's this short little animation of an extending frame indicating that the application is started. This animation needs almost 2 seconds (instead of maybe a quarter of a second) to finish and is jerky as well. This is not anything serious but might be a hint for the cause of the problem. Why I think the kernel update is the cause: I had an image of my system in a good and working state, made before the update to 2.6.15-25. After discovering the problems I installed this image again. Then I updated linux-image-2.6.15-26 and linux-restricted-modules-2.6.15-26 only. After that, the problems were there again. So it must be in one these two packages. I'm using the -686 packages. If you need more info please let me know. ** Affects: linux-source-2.6.15 (Ubuntu) Importance: Untriaged Status: Unconfirmed -- Jerky video/DVD playback since kernel update https://launchpad.net/bugs/52703 From mjg59 at codon.org.uk Tue Jul 11 22:04:22 2006 From: mjg59 at codon.org.uk (Matthew Garrett) Date: Tue, 11 Jul 2006 22:04:22 -0000 Subject: [Bug 50313] Re: mounting root filesystem stuck References: <20060619100018.13137.57015.malonedeb@gandwana.ubuntu.com> Message-ID: <20060711220422.27312.74748.malone@gangotri.ubuntu.com> So it's fine for all of you using the -386 kernel? -- mounting root filesystem stuck https://launchpad.net/bugs/50313 From nickvd at gmail.com Tue Jul 11 22:07:05 2006 From: nickvd at gmail.com (Nick) Date: Tue, 11 Jul 2006 22:07:05 -0000 Subject: [Bug 37472] Re: the keyboard don't work perfectly on laptops acer travelmate 2300 series with Dapper References: <20060331122206.23707.692.malonedeb@gandwana.ubuntu.com> Message-ID: <20060711220705.27257.27065.malone@gangotri.ubuntu.com> *** This bug is a duplicate of bug 39315 *** I TOO have an Acer Travelmate 2300 and have been getting really frustrated with this bug... i havent tried the nomux=1 fix, but i am running the latest kernel: $ uname -a Linux exile 2.6.15-25-386 #1 PREEMPT Wed Jun 14 11:25:49 UTC 2006 i686 GNU/Linux Reverting back to Breezy is just not acceptable, apci support is just too important to lose. I really hope this gets squashed soon, as i use this system for development and it's causing a bunch of minor bugs in my apps if i dont notice the missing keypress... Please let me know if there is any info i can provide, I hereby volunteer to be a guinea pig if need be... :) -- the keyboard don't work perfectly on laptops acer travelmate 2300 series with Dapper https://launchpad.net/bugs/37472 From osch0001 at umn.edu Tue Jul 11 23:07:46 2006 From: osch0001 at umn.edu (osch0001) Date: Tue, 11 Jul 2006 23:07:46 -0000 Subject: [Bug 50313] Re: mounting root filesystem stuck References: <20060619100018.13137.57015.malonedeb@gandwana.ubuntu.com> Message-ID: <20060711230746.19447.26400.malone@gandwana.ubuntu.com> With the -386 kernel it hangs for about 5 or 10 seconds as opposed to 2 or 3 minutes on my X60s. -- mounting root filesystem stuck https://launchpad.net/bugs/50313 From srm_dfr at hotmail.com Tue Jul 11 23:09:56 2006 From: srm_dfr at hotmail.com (eloj) Date: Tue, 11 Jul 2006 23:09:56 -0000 Subject: [Bug 31126] /boot full not checked -- suggestions References: <20060211062813.25235.10693.malonedeb@gangotri.ubuntu.com> Message-ID: <20060711230956.19629.4128.malone@gandwana.ubuntu.com> >"and one I refuse to let myself forget to fix before dapper" Someone fell asleep at the wheeeeel :-) I've been hit by this several times, due to having at one time created a too small boot partition. Just now, it happened again. The only reason I noticed is because the rattling of the disk suddenly stopped and CPU usage went up at a time that was unexpected. Here's an excerpt from my /boot after the failed upgrade: -rw-r--r-- 1 root root 6962511 2006-06-01 14:39 initrd.img-2.6.15-23-686 -rw-r--r-- 1 root root 6967716 2006-06-28 03:59 initrd.img-2.6.15-25-686 -rw-r--r-- 1 root root 1019904 2006-07-12 00:27 initrd.img-2.6.15-26-686 Notice the b0rken initrd-26 (file size) What's so sinister about this is that the Update Manager will conclude with a "Upgrade Completed!" and a helpful hint that maybe rebooting would be a good idea :-\ While I believe the bug really covers a wider range of packets (the Upgrade Manager for sure!), here are some feature suggestions: 1. Have the Ubuntu Installer warn about creating too small /boot partitions. Currently, about 10MiB (9.2MiB for me) is needed _per kernel_. A message box should inform any user creating a /boot smaller than say 50MiB about how the system can keep kernels around and how this might become an issue. 2. The default grub configuration seems to be "keep all kernels"? I don't know what the actual limit if any is, but the "howmany" entry in /boot/grub/menu.lst ought to be set to something sane instead of "all", or whatever the default is. Personally I think '4' would be more than enough, in which case /boot would have to be at least 50MiB. 3. At no time can the Upgrade Manager be allowed to report success, if a kernel package fails. Never. Don't know whose fault this is (initrd, apt/dpkg, upgrade manager, whatever), but it's Got. To. Be. Fixed. -- Doesn't check for failure due to full filesystem https://launchpad.net/bugs/31126 From mrm-ubuntu at mceachen.us Tue Jul 11 23:26:23 2006 From: mrm-ubuntu at mceachen.us (Matthew McEachen) Date: Tue, 11 Jul 2006 23:26:23 -0000 Subject: [Bug 37472] Re: the keyboard don't work perfectly on laptops acer travelmate 2300 series with Dapper References: <20060331122206.23707.692.malonedeb@gandwana.ubuntu.com> Message-ID: <20060711232623.27257.34873.malone@gangotri.ubuntu.com> *** This bug is a duplicate of bug 39315 *** Have you tried, as a ugly workaround, unloading the modules mentioned in the kernel bug report? Edit /etc/default/acpi-support's MODULES and add sbp2 ohci1394 ieee1394 ehci_hcd uhci_hcd usbcore And while you're at it, add a "sync" call to the end of /etc/acpi/prepare.sh (to make sure the disk cache buffers are clear before acpi suspend fails and your FS has to replay logs) The new kernel should not require the 1394 modules to be unloaded, as I understand it. -- the keyboard don't work perfectly on laptops acer travelmate 2300 series with Dapper https://launchpad.net/bugs/37472 From bassaf at gmail.com Tue Jul 11 23:51:35 2006 From: bassaf at gmail.com (bassaf) Date: Tue, 11 Jul 2006 23:51:35 -0000 Subject: [Bug 50323] Re: system freezes after last kernel update References: <20060619110659.20041.85554.malonedeb@gangotri.ubuntu.com> Message-ID: <20060711235135.27312.11020.malone@gangotri.ubuntu.com> It's been stable, but I can confirm the laggy video (using open source ati driver) that does not occur with the -23 version of the kernel. I tried compiling my own, but didn't get wifi support (intel pro wireless 2915)... Still too much of a n00b I guess... Anyway lag is visible with minimizing for example, and ruins emulators like dosbox and zsnes, causing lots of sound stuttering... What changes would cause such a thing?. -- system freezes after last kernel update https://launchpad.net/bugs/50323 From bassaf at gmail.com Wed Jul 12 00:03:29 2006 From: bassaf at gmail.com (bassaf) Date: Wed, 12 Jul 2006 00:03:29 -0000 Subject: [Bug 50323] Re: system freezes after last kernel update References: <20060619110659.20041.85554.malonedeb@gangotri.ubuntu.com> Message-ID: <20060712000329.19447.67428.malone@gandwana.ubuntu.com> Just verified, the 2.6.15-25-386 kernel image does not have the lag problem. Guess I'm a 386-kernel user until the next update :) -- system freezes after last kernel update https://launchpad.net/bugs/50323 From cbond at umci.com Wed Jul 12 00:05:18 2006 From: cbond at umci.com (KnottyMan) Date: Wed, 12 Jul 2006 00:05:18 -0000 Subject: [Bug 51157] Re: 6.06 64bit kernel totally broken after install, gcc3.3 fixes References: <20060627232049.17086.52183.malonedeb@gangotri.ubuntu.com> Message-ID: <20060712000518.19629.80854.malone@gandwana.ubuntu.com> Reinstalled, used ext3 for root. Before rebooting after the installer, chrooted to /target, apt'd stuff to get kernel tools, source, etc. apt'd the xeon prebuilt package which I hadn't noticed before, might as well try it. Also built 2.6.15.7 from ubuntu source with gcc 4.0.3. Finished the last installer question. Xeon prebuilt kernel package - same result. Segfaults everywhere. Interestingly, 2.6.15.7 ubuntu source with gcc 403 let me apt-get update, but segfaulted on gpgv. sshd also segfaults. 2.6.15.7 ubuntu source with gcc 3.3 segfaults everywhere. -- 6.06 64bit kernel totally broken after install, gcc3.3 fixes https://launchpad.net/bugs/51157 From nickvd at gmail.com Wed Jul 12 00:08:51 2006 From: nickvd at gmail.com (Nick) Date: Wed, 12 Jul 2006 00:08:51 -0000 Subject: [Bug 37472] Re: the keyboard don't work perfectly on laptops acer travelmate 2300 series with Dapper References: <20060331122206.23707.692.malonedeb@gandwana.ubuntu.com> Message-ID: <20060712000851.27257.84783.malone@gangotri.ubuntu.com> *** This bug is a duplicate of bug 39315 *** the following seemed to work, but I took a break and havn't done much typing: rmmod acpi_sbs rmmod i2c_acpi_ec I added them to /etc/rc.local so it'll remove the modules on boot, but this is only going to be a temporary workaround as having the battery meter is VERY important to me... -- the keyboard don't work perfectly on laptops acer travelmate 2300 series with Dapper https://launchpad.net/bugs/37472 From cjwatson at canonical.com Wed Jul 12 00:29:12 2006 From: cjwatson at canonical.com (Colin Watson) Date: Wed, 12 Jul 2006 00:29:12 -0000 Subject: [Bug 52679] Re: Linux upgrade doesn't update symlinks used by yaboot References: <20060711192201.27257.9057.malonedeb@gangotri.ubuntu.com> Message-ID: <20060712002913.19447.35360.malone@gandwana.ubuntu.com> Matt: link_in_boot defaults to no on i386, so I'm not sure where you got your result from ... Brian: In installs from the alternate install CD, the initial /etc /kernel-img.conf is written by the base-installer component of the installer; it won't be owned by any package, as you observe. However, I've just checked and it seems that the live filesystem build script does not match the behaviour of base-installer; they default link_in_boot to no regardless of the architecture. Either ubiquity should fix this up, or the live filesystem build script should be fixed. ** Also affects: ubiquity (Ubuntu) Importance: Untriaged Status: Unconfirmed ** Changed in: ubiquity (Ubuntu) Status: Unconfirmed => Confirmed Target: None => dapper-updates -- Linux upgrade doesn't update symlinks used by yaboot https://launchpad.net/bugs/52679 From cjwatson at canonical.com Wed Jul 12 00:30:45 2006 From: cjwatson at canonical.com (Colin Watson) Date: Wed, 12 Jul 2006 00:30:45 -0000 Subject: [Bug 52679] Re: Linux upgrade doesn't update symlinks used by yaboot References: <20060711192201.27257.9057.malonedeb@gangotri.ubuntu.com> Message-ID: <20060712003045.27312.61906.malone@gangotri.ubuntu.com> Thus, this affects the desktop CD only. Adam, can you have a look at fixing livefs.sh to be in sync with base-installer on this? (Longer-term, we should move to "link_in_boot yes" on all architectures. This is very likely to require modifications to some bootloader installer scripts, and possibly even to the bootloaders themselves.) -- Linux upgrade doesn't update symlinks used by yaboot https://launchpad.net/bugs/52679 From ubuntu at amorco.com Wed Jul 12 00:35:18 2006 From: ubuntu at amorco.com (Jyri Sillanpaa) Date: Wed, 12 Jul 2006 00:35:18 -0000 Subject: [Bug 39862] Re: [sky2] Marvell ethernet interface doesn' t work after reboot References: <20060417131032.16492.98385.malonedeb@gandwana.ubuntu.com> Message-ID: <20060712003518.27312.77721.malone@gangotri.ubuntu.com> Etienne: Somewhat strangely the sound card started working with the older kernel when I used modprobe to install the snd_via82xx module, insmod gave error about unknown symbol in the module (some kind of a problem with new module-init-tools?) ... and then used alsamixer to remove the mutes from Master and PCM. Here is a dmesg, it seems that one of the cards (the one integrated to the motherboar) uses skge and the one in PCI-slot sk98lin, go figure ... [4294774.165000] sk98lin: Network Device Driver v8.23.1.3 [4294774.165000] (C)Copyright 1999-2005 Marvell(R). [4294774.182000] ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 36 (level, low) -> IRQ 36 [4294774.199000] PCI: Setting latency timer of device 0000:05:00.0 to 64 [4294774.263000] eth1: Marvell Yukon 88E8053 Gigabit Ethernet Controller [4294774.272000] PrefPort:A RlmtMode:Check Link State [4294785.683000] eth1: network connection up using port A [4294785.683000] speed: 1000 [4294785.683000] autonegotiation: yes [4294785.683000] duplex mode: full [4294785.683000] flowctrl: symmetric [4294785.683000] role: slave [4294785.683000] irq moderation: disabled [4294785.683000] tcp offload: enabled [4294785.683000] scatter-gather: enabled [4294785.683000] tx-checksum: enabled [4294785.683000] rx-checksum: enabled [4294785.683000] rx-polling: enabled [4294794.297000] eth1: no IPv6 routers present [4294814.398000] skge eth0: enabling interface [4294816.828000] skge eth0: Link is up at 1000 Mbps, full duplex, flow control tx and rx [4294824.555000] eth0: no IPv6 routers present I'll try the driver next week (important deadline on Friday and weekend for the last fixes :-). -- [sky2] Marvell ethernet interface doesn' t work after reboot https://launchpad.net/bugs/39862 From rengarajan_iyengar at hotmail.com Wed Jul 12 02:31:21 2006 From: rengarajan_iyengar at hotmail.com (Rengarajan) Date: Wed, 12 Jul 2006 02:31:21 -0000 Subject: [Bug 52666] Re: DVD burning is extremely slow References: <20060711174651.19629.28863.malonedeb@gandwana.ubuntu.com> Message-ID: <20060712023121.27257.88952.malone@gangotri.ubuntu.com> Forgot to mention that CD-ROM burning works fine. (it burns at 40x which is the maximum speed Plextor PX-750UF can burn at). This makes me think that this could be a bug in growisofs (dvd+rw-tools). -- DVD burning is extremely slow https://launchpad.net/bugs/52666 From infyquest at gmail.com Wed Jul 12 04:04:30 2006 From: infyquest at gmail.com (Vijay Kiran Kamuju) Date: Wed, 12 Jul 2006 04:04:30 -0000 Subject: [Bug 52302] Re: Intel Pro Wireless 3945 is not detected with latest kernel update References: <20060708063621.27257.43382.malonedeb@gangotri.ubuntu.com> Message-ID: <20060712040430.27257.65936.malone@gangotri.ubuntu.com> With linux-image-686 and linux-restricted-modules-686 Its ts the same problem latest kernel does not detect my wireless interface but 2.6.15.23 both 386 and 686 detect that i have 3 interfaces including loopback but with the latest kernel its broken. Ben, if you want any more details i would like to help. how do we determine the ethernet interfaces in linux. lsmod shows ipw3945 Please help me -- Intel Pro Wireless 3945 is not detected with latest kernel update https://launchpad.net/bugs/52302 From infyquest at gmail.com Wed Jul 12 05:11:21 2006 From: infyquest at gmail.com (Vijay Kiran Kamuju) Date: Wed, 12 Jul 2006 05:11:21 -0000 Subject: [Bug 52302] Re: Intel Pro Wireless 3945 is not detected with latest kernel update References: <20060708063621.27257.43382.malonedeb@gangotri.ubuntu.com> Message-ID: <20060712051121.19629.50988.malone@gandwana.ubuntu.com> I have found it. There is no ipw3945d-$(uname -r) for the latest kernels. But its present for the 2.6.15.23 I dont know why its not present for the latest kernels. -- Intel Pro Wireless 3945 is not detected with latest kernel update https://launchpad.net/bugs/52302 From kgad at post.tau.ac.il Wed Jul 12 06:06:40 2006 From: kgad at post.tau.ac.il (ZZZ) Date: Wed, 12 Jul 2006 06:06:40 -0000 Subject: [Bug 50313] Re: mounting root filesystem stuck References: <20060619100018.13137.57015.malonedeb@gandwana.ubuntu.com> Message-ID: <20060712060640.27257.89253.malone@gangotri.ubuntu.com> I didn't try -386 kernel, but I understand that -386 does not support dual core. Am I right? -- mounting root filesystem stuck https://launchpad.net/bugs/50313 From info at jensberke.de Wed Jul 12 06:26:48 2006 From: info at jensberke.de (Jens Berke) Date: Wed, 12 Jul 2006 06:26:48 -0000 Subject: [Bug 52703] Re: Jerky video/DVD playback since kernel update References: <20060711215442.27257.14086.malonedeb@gangotri.ubuntu.com> Message-ID: <20060712062648.27312.61299.malone@gangotri.ubuntu.com> A little more info: I'm using the linux-686 meta package, that's why I had to update the linux-image and linux-restricted-modules packages at the same time. -- Jerky video/DVD playback since kernel update https://launchpad.net/bugs/52703 From ben.collins at ubuntu.com Tue Jul 11 21:23:30 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Tue, 11 Jul 2006 21:23:30 -0000 Subject: [Bug 52546] Re: [Bug 52546] Re: original HP keybord bundled with HP dc7600 doesn't work References: <20060710151635.27257.37195.malonedeb@gangotri.ubuntu.com> <20060711205457.19629.59788.malone@gandwana.ubuntu.com> Message-ID: <1152653010.4773.191.camel@grayson> On Tue, 2006-07-11 at 20:54 +0000, Ondřej Surý wrote: > Shouldn't that "just work"(tm)? > > Ubuntu cannot be installed on such computer, because keyboard doesn't > work at installation time and need that workaround with usbps2 > convertor. If this is not happening for a fresh install, then something is wrong with the installer, not the kernel. Please confirm that this is in fact the problem, and that the installer did in fact not setup for this module to be loaded automatically. Did you install via a Live-CD? -- original HP keybord bundled with HP dc7600 doesn't work https://launchpad.net/bugs/52546 From ben.collins at ubuntu.com Wed Jul 12 01:54:51 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Wed, 12 Jul 2006 01:54:51 -0000 Subject: [Bug 51157] Re: [Bug 51157] Re: 6.06 64bit kernel totally broken after install, gcc3.3 fixes References: <20060627232049.17086.52183.malonedeb@gangotri.ubuntu.com> <20060712000518.19629.80854.malone@gandwana.ubuntu.com> Message-ID: <1152669291.4773.214.camel@grayson> Then that negates the fact that it is gcc-3.3/gcc-4.0 related. I'm guessing that this can only be a general kernel bug, but finding out where it is fixed is going to be a tedious task. Obviously 2.6.17 fixes this problem somehow. -- 6.06 64bit kernel totally broken after install, gcc3.3 fixes https://launchpad.net/bugs/51157 From hk at haraldkl.de Wed Jul 12 06:32:57 2006 From: hk at haraldkl.de (haraldkl) Date: Wed, 12 Jul 2006 06:32:57 -0000 Subject: [Bug 50313] Re: mounting root filesystem stuck References: <20060619100018.13137.57015.malonedeb@gandwana.ubuntu.com> Message-ID: <20060712063257.19629.74567.malone@gandwana.ubuntu.com> Yupp, still got it in 2.6.15-26, too (on T60). With -386 it has a delay of some seconds as osch0001 said, whereas the -686 takes minutes. -- mounting root filesystem stuck https://launchpad.net/bugs/50313 From nickvd at gmail.com Wed Jul 12 08:02:42 2006 From: nickvd at gmail.com (Nick) Date: Wed, 12 Jul 2006 08:02:42 -0000 Subject: [Bug 37472] Re: the keyboard don't work perfectly on laptops acer travelmate 2300 series with Dapper References: <20060331122206.23707.692.malonedeb@gandwana.ubuntu.com> Message-ID: <20060712080242.19629.2590.malone@gandwana.ubuntu.com> *** This bug is a duplicate of bug 39315 *** I can now confirm that the above workaround did fix the problem, however as i said, acpi is very important... -- the keyboard don't work perfectly on laptops acer travelmate 2300 series with Dapper https://launchpad.net/bugs/37472 From StempUbuntu at gmail.com Wed Jul 12 08:05:53 2006 From: StempUbuntu at gmail.com (Stemp) Date: Wed, 12 Jul 2006 08:05:53 -0000 Subject: [Bug 34351] Re: Sound related issues with saa7134 References: <20060310194801.17018.83828.malonedeb@gangotri.ubuntu.com> Message-ID: <20060712080553.27257.83356.malone@gangotri.ubuntu.com> Same issue with 2.6.15-26-686 (2.6.15-26.44) -- Sound related issues with saa7134 https://launchpad.net/bugs/34351 From bharaneer at yahoo.com Wed Jul 12 08:16:18 2006 From: bharaneer at yahoo.com (buddhasmiles) Date: Wed, 12 Jul 2006 08:16:18 -0000 Subject: [Bug 39315] Re: Keyboard random repeat References: <20060412160910.15436.50293.malonedeb@gangotri.ubuntu.com> Message-ID: <20060712081618.19447.78815.malone@gandwana.ubuntu.com> My bad :-) Lorenzo many thanks for fixing it ! ** Changed in: linux-source-2.6.17 (Ubuntu Dapper) Status: Unconfirmed => Confirmed -- Keyboard random repeat https://launchpad.net/bugs/39315 From richard at zygous.co.uk Wed Jul 12 09:11:06 2006 From: richard at zygous.co.uk (RJT) Date: Wed, 12 Jul 2006 09:11:06 -0000 Subject: [Bug 36461] Re: XOrg dualhead regression References: <20060324174628.6253.87338.malonedeb@gandwana.ubuntu.com> Message-ID: <20060712091106.19447.79704.malone@gandwana.ubuntu.com> Yep, I have the same problem using an onboard i810 and an SiS card - I'm eagerly awaiting a fix cos I'm using Dapper at work and programming is much more convenient with dual-head. I already look a bit stupid having recommended Ubuntu to all my colleagues and then been seen with a broken dual-head config - it'd be a great shame if I have to switch back to my previous distro in order to get both screens working :( -- XOrg dualhead regression https://launchpad.net/bugs/36461 From mad4linux at gmail.com Wed Jul 12 10:12:59 2006 From: mad4linux at gmail.com (Linuxmad) Date: Wed, 12 Jul 2006 10:12:59 -0000 Subject: [Bug 48556] Re: ACPI-0517: ****Error Method parse/execudion failed References: <20060605175228.5989.15658.malonedeb@gangotri.ubuntu.com> Message-ID: <20060712101259.27257.50245.malone@gangotri.ubuntu.com> Using toshiba M70-122 and can confirm since 2.6.15-25 and now 2.6.15-26-44 that it does not boot. Still have to boot acpi=off -- ACPI-0517: ****Error Method parse/execudion failed https://launchpad.net/bugs/48556 From lix at lix.cc Wed Jul 12 11:17:34 2006 From: lix at lix.cc (lix) Date: Wed, 12 Jul 2006 11:17:34 -0000 Subject: [Bug 43661] Re: ThinkPad X60: select() to /dev/rtc to wait for clock tick timed out References: <445F9367.80207@canonical.com> Message-ID: <20060712111734.2164.25622.malone@gangotri.ubuntu.com> --directisa option works for me! (IBM thinkpad x60 also). root at foo:/home/bar# hwclock --directisa -w root at foo:/home/bar# hwclock --directisa -r Wed 12 Jul 2006 13:10:36 CEST -0.494677 seconds lg, a -- ThinkPad X60: select() to /dev/rtc to wait for clock tick timed out https://launchpad.net/bugs/43661 From ninni.crisafi at gmail.com Wed Jul 12 11:28:07 2006 From: ninni.crisafi at gmail.com (exetera) Date: Wed, 12 Jul 2006 11:28:07 -0000 Subject: [Bug 22238] Re: Use later version of acx References: <20060113141710.21012.7837.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060712112807.2164.10734.malone@gangotri.ubuntu.com> I really like the idea of having acx driver in kernel by default, but it still misses some firmware. It took me some time and effort (I >had to put my cart into a computer with windows) to download firmware from >ftp://ftp.dlink.com/Wireless/dwl520+/Driver/dwl520+_drivers_307.zip and creating the necessary file tiacx100c0D from >RADIO11.BIN(from this package). Jacek Wolszczak, how do you made this? Have you just move RADIO11.BIN to tiacx100c0D? Thanks for your answer!!!! -- Use later version of acx https://launchpad.net/bugs/22238 From ondrej at sury.org Wed Jul 12 11:57:54 2006 From: ondrej at sury.org (=?utf-8?b?T25kxZllaiBTdXLDvQ==?=) Date: Wed, 12 Jul 2006 11:57:54 -0000 Subject: [Bug 52546] Re: original HP keybord bundled with HP dc7600 doesn't work References: <20060710151635.27257.37195.malonedeb@gangotri.ubuntu.com> Message-ID: <20060712115754.6479.6901.malone@gandwana.ubuntu.com> > Did you install via a Live-CD? You are right, that computer was upgraded from breezy. But I have two pieces of same hardware spare on stock, I can try installing on box on green field and see what happens. It seems to me that it maybe related to some Ubuntu specific patches, because all other distros installed by folk at our office (Fedora, Slackware and Gentoo ATM) doesn't have that problem with keyboard at all. -- original HP keybord bundled with HP dc7600 doesn't work https://launchpad.net/bugs/52546 From ondrej at sury.org Wed Jul 12 11:54:04 2006 From: ondrej at sury.org (=?utf-8?b?T25kxZllaiBTdXLDvQ==?=) Date: Wed, 12 Jul 2006 11:54:04 -0000 Subject: [Bug 52546] Re: original HP keybord bundled with HP dc7600 doesn't work References: <20060710151635.27257.37195.malonedeb@gangotri.ubuntu.com> Message-ID: <20060712115404.2164.28167.malone@gangotri.ubuntu.com> This is current content of /etc/modules: # /etc/modules: kernel modules to load at boot time. # # This file contains the names of kernel modules that should be loaded # at boot time, one per line. Lines beginning with "#" are ignored. lp mousedev psmouse Will providing dmesg output without usbps2 convertor plugged help? The keyboard doesn't start to work when usbps2 is plugged in after boot, it has to be plugged from start of boot. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Rejected => Confirmed -- original HP keybord bundled with HP dc7600 doesn't work https://launchpad.net/bugs/52546 From carlos.eduardo.br at gmail.com Wed Jul 12 16:31:31 2006 From: carlos.eduardo.br at gmail.com (Carlos Eduardo Moreira dos Santos) Date: Wed, 12 Jul 2006 16:31:31 -0000 Subject: [Bug 50180] Re: high cpu on xorg (~40%) References: <20060618070639.20041.4952.malonedeb@gangotri.ubuntu.com> Message-ID: <20060712163131.6479.75035.malone@gandwana.ubuntu.com> 2.6.15-26-686 is OK! -- high cpu on xorg (~40%) https://launchpad.net/bugs/50180 From jakob3 at comcast.net Wed Jul 12 16:37:19 2006 From: jakob3 at comcast.net (jakobc) Date: Wed, 12 Jul 2006 16:37:19 -0000 Subject: [Bug 50588] Re: Slow boot time since update to kernel 2.6.15-25-686 References: <20060621173616.23311.67847.malonedeb@gangotri.ubuntu.com> Message-ID: <20060712163719.2212.33580.malone@gangotri.ubuntu.com> I just did the updates that came down today. I guess there were no fixes to this specific bug. Still hangs for about 2 min when mounting root file system. -- Slow boot time since update to kernel 2.6.15-25-686 https://launchpad.net/bugs/50588 From Chris.Ostler+launchpad.ubuntu.com at gmail.com Wed Jul 12 17:06:11 2006 From: Chris.Ostler+launchpad.ubuntu.com at gmail.com (Chris Ostler) Date: Wed, 12 Jul 2006 17:06:11 -0000 Subject: [Bug 36461] Re: XOrg dualhead regression References: <20060324174628.6253.87338.malonedeb@gandwana.ubuntu.com> Message-ID: <20060712170611.6479.17303.malone@gandwana.ubuntu.com> I have to chime in on this as well. It seems that the hardware configurations that will trigger this bug (any dual-head config using more than one greaphics card, as I understand) is not uncommon. As Dapper is the LTS release, it seems this is not a bug that should be left to bite users for the next five years! -- XOrg dualhead regression https://launchpad.net/bugs/36461 From reynard.list at gmail.com Wed Jul 12 17:15:59 2006 From: reynard.list at gmail.com (Reynard Hilman) Date: Wed, 12 Jul 2006 17:15:59 -0000 Subject: [Bug 52785] usb keyboard repeat not smooth with smp kernel References: <20060712171559.2212.30514.malonedeb@gangotri.ubuntu.com> Message-ID: <20060712171559.2212.30514.malonedeb@gangotri.ubuntu.com> Public bug reported: Binary package hint: linux-image-2.6-686-smp I'm using ibm thinkpad t60 with core duo. I have this strange problem, sort of funny I guess. When I use smp kernel and usb keyboard, if I press down and hold a key, the repeat is not smooth. What i mean is the computer does not take the repeat evenly. so for example I try to navigate in the text editor by pressing the arrow key, the cursor would move a certain distance and then stuck (just for a very short time) and then move again and stuck. so it's pretty annoying. However this does not happen when I switch to 386 kernel (non smp). And more strange is that if I play mp3 (using rhythmbox player) the problem disappear in the smp kernel. This problem does not appear if I use the laptop keyboard. It seems that when I have 2 processors idle they all fight to process my keyboard repeat and in doing this it creates that unsmooth repeat. If one of them is busy doing something then they don't fight and I get smooth result. really funny, they just need to learn work together I guess :) ** Affects: linux-meta (Ubuntu) Importance: Untriaged Status: Unconfirmed -- usb keyboard repeat not smooth with smp kernel https://launchpad.net/bugs/52785 From hannes.hauswedell at gmail.com Wed Jul 12 18:49:29 2006 From: hannes.hauswedell at gmail.com (Hannes Hauswedell) Date: Wed, 12 Jul 2006 18:49:29 -0000 Subject: [Bug 48932] Re: i915_wait_irq error: system hangs while running heavy graphics applications References: <20060608003437.3609.4293.malonedeb@gangotri.ubuntu.com> Message-ID: <20060712184929.6479.91773.malone@gandwana.ubuntu.com> i wanted to add that trying to run an opengl application in wine always causes this error on the inspiron1300, whereas on the 640m they only happen 'most' of the time. this really is an annoying issue, i would be glad if someone looked into it. if more information is required please let me know. -- i915_wait_irq error: system hangs while running heavy graphics applications https://launchpad.net/bugs/48932 From martinez.bernal at gmail.com Wed Jul 12 18:52:17 2006 From: martinez.bernal at gmail.com (Edu) Date: Wed, 12 Jul 2006 18:52:17 -0000 Subject: [Bug 30557] Re: cpu idle time in /proc/stat wrong References: <20060205141542.11709.55517.malonedeb@gandwana.ubuntu.com> Message-ID: <20060712185217.2164.5191.malone@gangotri.ubuntu.com> Last kernel 686-26 doesn't seem to solve the problem for me. At the moment I use 386 kernel because I think that set max_cstate=1 decreases battery life according to this web: http://www.thinkwiki.org/wiki/Talk:Problem_with_high_pitch_noises -- cpu idle time in /proc/stat wrong https://launchpad.net/bugs/30557 From ben.collins at ubuntu.com Wed Jul 12 19:14:20 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Wed, 12 Jul 2006 19:14:20 -0000 Subject: [Bug 52546] Re: [Bug 52546] Re: original HP keybord bundled with HP dc7600 doesn't work References: <20060710151635.27257.37195.malonedeb@gangotri.ubuntu.com> <20060712115404.2164.28167.malone@gangotri.ubuntu.com> Message-ID: <1152731660.4773.285.camel@grayson> > Will providing dmesg output without usbps2 convertor plugged help? The keyboard doesn't start to work when usbps2 is plugged in after boot, it has to be plugged from start of boot. Yes, that dmesg will be helpful. -- original HP keybord bundled with HP dc7600 doesn't work https://launchpad.net/bugs/52546 From ben.collins at ubuntu.com Wed Jul 12 19:13:17 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Wed, 12 Jul 2006 19:13:17 -0000 Subject: [Bug 52302] Re: [Bug 52302] Re: Intel Pro Wireless 3945 is not detected with latest kernel update References: <20060708063621.27257.43382.malonedeb@gangotri.ubuntu.com> <20060712051121.19629.50988.malone@gandwana.ubuntu.com> Message-ID: <1152731597.4773.283.camel@grayson> On Wed, 2006-07-12 at 05:11 +0000, Vijay Kiran Kamuju wrote: > I have found it. > There is no ipw3945d-$(uname -r) for the latest kernels. > But its present for the 2.6.15.23 > I dont know why its not present for the latest kernels. Are you absolutely sure you have linux-restricted-modules-2.6.15-26-686 installed? -- Intel Pro Wireless 3945 is not detected with latest kernel update https://launchpad.net/bugs/52302 From ben.collins at ubuntu.com Wed Jul 12 19:16:21 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Wed, 12 Jul 2006 19:16:21 -0000 Subject: [Bug 22238] Re: [Bug 22238] Re: Use later version of acx References: <20060113141710.21012.7837.launchpad@macquarie.warthogs.hbd.com> <20060712112807.2164.10734.malone@gangotri.ubuntu.com> Message-ID: <1152731782.4773.288.camel@grayson> On Wed, 2006-07-12 at 11:28 +0000, exetera wrote: > I really like the idea of having acx driver in kernel by default, but it still misses some firmware. It took me some time and effort (I >had to put my cart into a computer with windows) to download firmware from >ftp://ftp.dlink.com/Wireless/dwl520+/Driver/dwl520+_drivers_307.zip and creating the necessary file tiacx100c0D from >RADIO11.BIN(from this package). > Jacek Wolszczak, how do you made this? > Have you just move RADIO11.BIN to tiacx100c0D? > Thanks for your answer!!!! Please read /lib/firmware/`uname -r`/acx/readme.txt Also, make sure you have linux-restricted-modules installed. -- Use later version of acx https://launchpad.net/bugs/22238 From cbond at umci.com Wed Jul 12 19:39:30 2006 From: cbond at umci.com (KnottyMan) Date: Wed, 12 Jul 2006 19:39:30 -0000 Subject: [Bug 51157] Re: 6.06 64bit kernel totally broken after install, gcc3.3 fixes References: <20060627232049.17086.52183.malonedeb@gangotri.ubuntu.com> Message-ID: <20060712193930.2164.61575.malone@gangotri.ubuntu.com> Vanilla 2.6.15 with mm4 patch (for Areca) and gcc3.3 works, X works, apt works. Vanilla 2.6.15 + only Areca driver from areca.us site and gcc 3.3 works. X works, apt works. Vanilla 2.6.15 + only Areca driver from areca.us site and gcc 4.0.3 also works. X works, apt works. -- 6.06 64bit kernel totally broken after install, gcc3.3 fixes https://launchpad.net/bugs/51157 From richardn at cs.waikato.ac.nz Wed Jul 12 21:37:17 2006 From: richardn at cs.waikato.ac.nz (RichardN) Date: Wed, 12 Jul 2006 21:37:17 -0000 Subject: [Bug 46228] Re: Orinocco card does not work References: <20060523215851.23695.94118.malonedeb@gandwana.ubuntu.com> Message-ID: <20060712213717.2164.58879.malone@gangotri.ubuntu.com> There is a thread with people having the same problem on the Ubuntu forums: http://www.ubuntuforums.org/showthread.php?t=150627 The problem is that the orinocco and the host_ap drivers were both loaded. Blacklisting the host_ap drivers as suggested in the thread fixes the problem. It shouldn't be loading both those drivers though. -- Orinocco card does not work https://launchpad.net/bugs/46228 From jer at jers.net Wed Jul 12 23:04:02 2006 From: jer at jers.net (Jer) Date: Wed, 12 Jul 2006 23:04:02 -0000 Subject: [Bug 30557] SMP looks like the problem References: <20060205141542.11709.55517.malonedeb@gandwana.ubuntu.com> Message-ID: <20060712230402.2212.96703.malone@gangotri.ubuntu.com> I can confirm that this is a SMP related issue. I re-built my kernel with the only differences being that I changed my CPU to a Pentium-M, turned off SMP, and modified the ticks to 250/sec. Performance is back to that of Breezy on my Celeron-M 1.4Ghz laptop, and I don't think its the different CPU settings, or the scheduler. Interactivity, especially while in a terminal is also much improved. -- cpu idle time in /proc/stat wrong https://launchpad.net/bugs/30557 From ben.collins at ubuntu.com Wed Jul 12 23:32:44 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Wed, 12 Jul 2006 23:32:44 -0000 Subject: [Bug 30557] Re: [Bug 30557] SMP looks like the problem References: <20060205141542.11709.55517.malonedeb@gandwana.ubuntu.com> <20060712230402.2212.96703.malone@gangotri.ubuntu.com> Message-ID: <1152747164.4773.298.camel@grayson> On Wed, 2006-07-12 at 23:04 +0000, Jer wrote: > I can confirm that this is a SMP related issue. I re-built my kernel > with the only differences being that I changed my CPU to a Pentium-M, > turned off SMP, and modified the ticks to 250/sec. > > Performance is back to that of Breezy on my Celeron-M 1.4Ghz laptop, and > I don't think its the different CPU settings, or the scheduler. > Interactivity, especially while in a terminal is also much improved. Basically what you did was recreate the -386 kernel. -- cpu idle time in /proc/stat wrong https://launchpad.net/bugs/30557 From infyquest at gmail.com Thu Jul 13 00:29:06 2006 From: infyquest at gmail.com (Vijay Kiran Kamuju) Date: Thu, 13 Jul 2006 00:29:06 -0000 Subject: [Bug 52302] Re: Intel Pro Wireless 3945 is not detected with latest kernel update References: <20060708063621.27257.43382.malonedeb@gangotri.ubuntu.com> Message-ID: <20060713002906.2164.82853.malone@gangotri.ubuntu.com> the version of the linux-restricted-modules-686 in my system is 2.6.15.22 I dont know why the adept is not upgrading it to 2.6.15.24 which is the latest. It would be gr8 if we both could chat, could you tell me on which irc channel would u be available and timings. -- Intel Pro Wireless 3945 is not detected with latest kernel update https://launchpad.net/bugs/52302 From ben.collins at ubuntu.com Thu Jul 13 00:48:31 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Thu, 13 Jul 2006 00:48:31 -0000 Subject: [Bug 50180] Re: high cpu on xorg (~40%) References: <20060618070639.20041.4952.malonedeb@gangotri.ubuntu.com> Message-ID: <20060713004831.2212.50709.malone@gangotri.ubuntu.com> Thanks for testing. ** Changed in: linux-meta (Ubuntu) Sourcepackagename: linux-meta => linux-source-2.6.15 Status: Unconfirmed => Fix Released -- high cpu on xorg (~40%) https://launchpad.net/bugs/50180 From rgabriel at nycap.rr.com Thu Jul 13 02:14:25 2006 From: rgabriel at nycap.rr.com (Richard Gabriel) Date: Thu, 13 Jul 2006 02:14:25 -0000 Subject: [Bug 51123] Re: HZ 250 causes choppy animation and slow performance References: <20060627152117.17054.34096.malonedeb@gangotri.ubuntu.com> Message-ID: <20060713021425.6523.4177.malone@gandwana.ubuntu.com> This also occurs with kernel 2.6.15-26-686. -- HZ 250 causes choppy animation and slow performance https://launchpad.net/bugs/51123 From kbridger at shaw.ca Thu Jul 13 03:02:45 2006 From: kbridger at shaw.ca (Kirk Bridger) Date: Thu, 13 Jul 2006 03:02:45 -0000 Subject: [Bug 37163] Re: Ipods react badly to checks for EFI partition tables References: <20060329132453.6279.44854.malonedeb@gandwana.ubuntu.com> Message-ID: <20060713030245.2212.42739.malone@gangotri.ubuntu.com> I'm seeing the exact same problem on Dapper - my 40 GB iPod Photo is mounted and is browseable via Nautilus, but gtkpod fails to find the iTunes database. Launching gtkpod produces the following in /var/log/messages Jul 12 19:11:01 localhost kernel: [ 140.716633] usb 7-5: reset high speed USB device using ehci_hcd and address 2 Jul 12 19:11:02 localhost kernel: [ 140.783302] sd 1:0:0:0: SCSI error: return code = 0x70000 Jul 12 19:11:02 localhost kernel: [ 140.783307] end_request: I/O error, dev sdb, sector 20549599 Jul 12 19:11:02 localhost kernel: [ 140.783312] end_request: I/O error, dev sdb, sector 20549600 Jul 12 19:11:32 localhost kernel: [ 155.810031] usb 7-5: reset high speed USB device using ehci_hcd and address 2 Jul 12 19:11:42 localhost kernel: [ 160.924336] usb 7-5: reset high speed USB device using ehci_hcd and address 2 Jul 12 19:11:58 localhost kernel: [ 169.106827] usb 7-5: reset high speed USB device using ehci_hcd and address 2 Jul 12 19:11:59 localhost kernel: [ 169.234583] usb 7-5: reset high speed USB device using ehci_hcd and address 2 Jul 12 19:12:09 localhost kernel: [ 174.348892] usb 7-5: reset high speed USB device using ehci_hcd and address 2 Jul 12 19:12:09 localhost kernel: [ 174.417881] sd 1:0:0:0: scsi: Device offlined - not ready after error recovery Jul 12 19:12:09 localhost kernel: [ 174.417889] sd 1:0:0:0: SCSI error: return code = 0x50000 Jul 12 19:12:09 localhost kernel: [ 174.417891] end_request: I/O error, dev sdb, sector 20549599 Jul 12 19:12:09 localhost kernel: [ 174.417912] lost page write due to I/O error on sdb2 The iPod is conneted via a USB PCI card to the dock directly. This is after upgrading the kernel this afternoon to 2.6.15-26-amd64-k8. It seems to me that this makes Dapper unable to handle iPods at all - which is somewhat more dramatic than 'medium'. Rolling my own kernel is right now beyond my skills, and certainly those of the target Dapper user. -- Ipods react badly to checks for EFI partition tables https://launchpad.net/bugs/37163 From t.templin at gnuwhv.de Thu Jul 13 04:12:42 2006 From: t.templin at gnuwhv.de (coastgnu) Date: Thu, 13 Jul 2006 04:12:42 -0000 Subject: [Bug 52835] kernel panik linux-image-2.6.15-25-k7 but not linux-image-2.6.15-25-i386 References: <20060713041242.2212.72578.malonedeb@gangotri.ubuntu.com> Message-ID: <20060713041242.2212.72578.malonedeb@gangotri.ubuntu.com> Public bug reported: Binary package hint: linux-source-2.6.15 booting linux-image-2.6.15-25-k7 causes a kernel panik: RAMDISK: ran out of compressed data invalid compression format (err=1) booting linux-image-2.6.15-25-i386 works fine ** Affects: linux-source-2.6.15 (Ubuntu) Importance: Untriaged Status: Unconfirmed -- kernel panik linux-image-2.6.15-25-k7 but not linux-image-2.6.15-25-i386 https://launchpad.net/bugs/52835 From t.templin at gnuwhv.de Thu Jul 13 05:01:11 2006 From: t.templin at gnuwhv.de (coastgnu) Date: Thu, 13 Jul 2006 05:01:11 -0000 Subject: [Bug 52835] Re: kernel panik linux-image-2.6.15-25-k7 but not linux-image-2.6.15-25-i386 References: <20060713041242.2212.72578.malonedeb@gangotri.ubuntu.com> Message-ID: <20060713050111.2164.81993.malone@gangotri.ubuntu.com> Thanks to crimsum who assisted on #ubuntu-bugs irc-channel I was able to solve this problem: Do the following: cd /boot sudo -s mkinitramfs -k -o /boot/initrd.img-2.6.15-26-k7 2.6.15-26-k7 (gives a message: Working files in /tmp/mkinitramfs_wyu4NH and overlay in /tmp/mkinitramfs-OL_8eINcl) Check if the new inird-img is created: ls -l /boot/initrd.img-2.6.15-26-k7 shows a new timestamp, so the new initrd.img was created sucessfully reboot linux-image-2.6.15-25-k7 -- kernel panik linux-image-2.6.15-25-k7 but not linux-image-2.6.15-25-i386 https://launchpad.net/bugs/52835 From gregjhall at optusnet.com.au Thu Jul 13 05:01:39 2006 From: gregjhall at optusnet.com.au (greghall) Date: Thu, 13 Jul 2006 05:01:39 -0000 Subject: [Bug 43961] Re: Power down after shutdown does not work... References: <20060510072310.21520.62027.malonedeb@gandwana.ubuntu.com> Message-ID: <20060713050139.2164.27709.launchpad@gangotri.ubuntu.com> ** Attachment added: "Logs from my desktop machine" http://librarian.launchpad.net/3400330/logs.tar.gz -- Power down after shutdown does not work... https://launchpad.net/bugs/43961 From hoser at ozemail.com.au Thu Jul 13 05:06:42 2006 From: hoser at ozemail.com.au (blimpyboy) Date: Thu, 13 Jul 2006 05:06:42 -0000 Subject: [Bug 52839] Keyboard Repeat Rate Really Slow with 2.6.15-25 and 2.6.15-26 References: <20060713050643.2164.79754.malonedeb@gangotri.ubuntu.com> Message-ID: <20060713050643.2164.79754.malonedeb@gangotri.ubuntu.com> Public bug reported: When using 2.6.15-25 or 2.6.15-26 (686) the repeat rate on my keyboard is really slow. I'm using kdbrate -r 30 . It repeats slower than when using kdbrate -r 2 with 2.6.15-23 (basically unusable). It is a USB keyboard. Details below. [17194779.548000] usb 2-1: new low speed USB device using uhci_hcd and address 4 [17194779.880000] input: Logitech Logitech USB Keyboard as /class/input/input7 [17194779.880000] input: USB HID v1.10 Keyboard [Logitech Logitech USB Keyboard] on usb-0000:00:1d.1-1 [17194779.920000] input: Logitech Logitech USB Keyboard as /class/input/input8 [17194779.920000] input: USB HID v1.10 Device [Logitech Logitech USB Keyboard] on usb-0000:00:1d.1-1 ** Affects: linux-source-2.6.15 (Ubuntu) Importance: Untriaged Status: Unconfirmed -- Keyboard Repeat Rate Really Slow with 2.6.15-25 and 2.6.15-26 https://launchpad.net/bugs/52839 From mail at stefanwehr.de Thu Jul 13 06:27:39 2006 From: mail at stefanwehr.de (Stefan Wehr) Date: Thu, 13 Jul 2006 06:27:39 -0000 Subject: [Bug 50588] Re: Slow boot time since update to kernel 2.6.15-25-686 References: <20060621173616.23311.67847.malonedeb@gangotri.ubuntu.com> Message-ID: <20060713062739.25598.59641.malone@gangotri.ubuntu.com> same problem after upgrading to 686-...26. Here's my /proc/mounts: rootfs / rootfs rw 0 0 none /sys sysfs rw 0 0 none /proc proc rw,nodiratime 0 0 udev /dev tmpfs rw 0 0 /dev/sda8 / ext3 rw,data=ordered 0 0 /dev/sda8 /dev/.static/dev ext3 rw,data=ordered 0 0 tmpfs /var/run tmpfs rw 0 0 tmpfs /var/lock tmpfs rw 0 0 usbfs /proc/bus/usb usbfs rw 0 0 tmpfs /lib/modules/2.6.15-26-686/volatile tmpfs rw 0 0 devpts /dev/pts devpts rw 0 0 tmpfs /dev/shm tmpfs rw 0 0 tmpfs /var/run tmpfs rw 0 0 tmpfs /var/lock tmpfs rw 0 0 /dev/sda6 /home ext3 rw,data=ordered 0 0 /dev/sda1 /media/sda1 ntfs ro,noatime,nodiratime,uid=0,gid=46,umask=07,nls=utf8,errors=continue,mft_zone_multiplier=1 0 0 /dev/sda2 /media/sda2 vfat rw,nodiratime,gid=46,fmask=0007,dmask=0007,codepage=cp437,iocharset=iso8859-1,utf8 0 0 /dev/sda5 /windows vfat rw,nodiratime,gid=46,fmask=0007,dmask=0007,codepage=cp437,iocharset=iso8859-1,utf8 0 0 and here's my /etc/fstab # /etc/fstab: static file system information. # # proc /proc proc defaults 0 0 /dev/sda8 / ext3 defaults,errors=remount-ro 0 1 /dev/sda6 /home ext3 defaults 0 2 /dev/sda1 /media/sda1 ntfs defaults,nls=utf8,umask=007,gid=46 0 1 /dev/sda2 /media/sda2 vfat defaults,utf8,umask=007,gid=46 0 1 /dev/sda5 /windows vfat defaults,utf8,umask=007,gid=46 0 1 /dev/sda7 none swap sw 0 0 /dev/scd0 /media/cdrom0 udf,iso9660 user,noauto 0 0 /dev/sdb1 /usb auto user,noauto 0 0 -- Slow boot time since update to kernel 2.6.15-25-686 https://launchpad.net/bugs/50588 From hoser at ozemail.com.au Thu Jul 13 08:41:45 2006 From: hoser at ozemail.com.au (blimpyboy) Date: Thu, 13 Jul 2006 08:41:45 -0000 Subject: [Bug 52839] Re: Keyboard Repeat Rate Really Slow with 2.6.15-25 and 2.6.15-26 References: <20060713050643.2164.79754.malonedeb@gangotri.ubuntu.com> Message-ID: <20060713084145.25598.85883.malone@gangotri.ubuntu.com> I can confirm that it works fine with 2.6.25-26 (386) . The dmesg with the 386 kernel is [4306704.980000] usb 2-1: USB disconnect, address 2 [4306707.427000] usb 2-1: new low speed USB device using uhci_hcd and address 3 [4306707.627000] input: Logitech Logitech USB Keyboard as /class/input/input5 [4306707.627000] input: USB HID v1.10 Keyboard [Logitech Logitech USB Keyboard] on usb-0000:00:1d.1-1 [4306707.663000] input: Logitech Logitech USB Keyboard as /class/input/input6 [4306707.663000] input: USB HID v1.10 Device [Logitech Logitech USB Keyboard] on usb-0000:00:1d.1-1 which appears to be the same as with the 686 kernel :/ -- Keyboard Repeat Rate Really Slow with 2.6.15-25 and 2.6.15-26 https://launchpad.net/bugs/52839 From aigarius at debian.org Thu Jul 13 09:22:15 2006 From: aigarius at debian.org (Aigars Mahinovs) Date: Thu, 13 Jul 2006 09:22:15 -0000 Subject: [Bug 47561] Re: ACPI-battery monitoring stops working after some time References: <20060530194416.5009.28356.malonedeb@gandwana.ubuntu.com> Message-ID: <20060713092215.25554.32432.malone@gangotri.ubuntu.com> I can confirm this error on nx6110 -- ACPI-battery monitoring stops working after some time https://launchpad.net/bugs/47561 From shapiro at math.umass.edu Thu Jul 13 10:05:53 2006 From: shapiro at math.umass.edu (geos) Date: Thu, 13 Jul 2006 10:05:53 -0000 Subject: [Bug 52855] ThinkPad x60s hangs temporarily at Mounting Root Filesystem References: <20060713100553.12867.62199.malonedeb@gandwana.ubuntu.com> Message-ID: <20060713100553.12867.62199.malonedeb@gandwana.ubuntu.com> Public bug reported: Running 6.06 LTS 2.6.15 stock: My x60s L2300 will hang temporarily (maybe 5 minutes) at boot at the "Mounting Root Filesystem" stage. The problem can be fixed by going into the BIOS and changing the SATA mode from "AHCI" to "Compatibility." ** Affects: linux-source-2.6.15 (Ubuntu) Importance: Untriaged Status: Unconfirmed -- ThinkPad x60s hangs temporarily at Mounting Root Filesystem https://launchpad.net/bugs/52855 From ted at tedcarnahan.com Thu Jul 13 10:44:07 2006 From: ted at tedcarnahan.com (Ted Carnahan) Date: Thu, 13 Jul 2006 10:44:07 -0000 Subject: [Bug 50031] Re: [regression] Suspend [to-RAM and to-disk] is broken in 2.6.15-25.43 References: <20060616182146.13137.51951.malonedeb@gandwana.ubuntu.com> Message-ID: <20060713104407.13020.3208.malone@gandwana.ubuntu.com> I have a similar issue on Dell Inspiron 5150 (ATI Radeon 9000 Mobility video, not the NVidia variant). Choosing Suspend to disk or ram causes suspend to begin, but after backlight is switched off, the fan comes on full blast and nothing more happens. Suspend is not successful in any case. Reverting to kernel 2.6.15-21 works for me, I haven't tried any more recent versions. I can confirm that 2.6.15-26 does not work for me. -- [regression] Suspend [to-RAM and to-disk] is broken in 2.6.15-25.43 https://launchpad.net/bugs/50031 From florian at boucault.ath.cx Thu Jul 13 11:29:52 2006 From: florian at boucault.ath.cx (Kaleo) Date: Thu, 13 Jul 2006 11:29:52 -0000 Subject: [Bug 50031] Re: [regression] Suspend [to-RAM and to-disk] is broken in 2.6.15-25.43 References: <20060616182146.13137.51951.malonedeb@gandwana.ubuntu.com> Message-ID: <20060713112952.25554.75813.malone@gangotri.ubuntu.com> Recent updates, notably 2.6.15-26 fixed this issue for my Thinkpad T43 (1871-W34). -- [regression] Suspend [to-RAM and to-disk] is broken in 2.6.15-25.43 https://launchpad.net/bugs/50031 From daniel.holbach at ubuntu.com Thu Jul 13 11:36:24 2006 From: daniel.holbach at ubuntu.com (Daniel Holbach) Date: Thu, 13 Jul 2006 11:36:24 -0000 Subject: [Bug 39958] Re: Trying to access unmounted SMBFS share in Rhythmbox causes entire system crash References: <20060418054930.1684.32955.malonedeb@gangotri.ubuntu.com> Message-ID: <20060713113624.13020.92986.malone@gandwana.ubuntu.com> Marking closed then, thanks for following up. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Unconfirmed => Fix Released -- Trying to access unmounted SMBFS share in Rhythmbox causes entire system crash https://launchpad.net/bugs/39958 From nacho.exr at gmail.com Thu Jul 13 11:48:20 2006 From: nacho.exr at gmail.com (=?utf-8?q?Ignacio_Lago_Font=C3=A1n?=) Date: Thu, 13 Jul 2006 11:48:20 -0000 Subject: [Bug 48092] Re: Video hardware freeze whole system when full screen References: <20060602184139.2224.97881.malonedeb@gangotri.ubuntu.com> Message-ID: <20060713114820.12867.11213.malone@gandwana.ubuntu.com> Same critical result with official kernel 2.6.15-26-686 (Tested again that there is no problem with kernel 2.6.15-22-686) Video memory management bug since the kernel 2.6.15-23-686? Resolution bug between X.org and kernel? In more than 2 years with Ubuntu I haven't had problems with this :/ -- Video hardware freeze whole system when full screen https://launchpad.net/bugs/48092 From john.dong at gmail.com Thu Jul 13 13:44:07 2006 From: john.dong at gmail.com (John Dong) Date: Thu, 13 Jul 2006 13:44:07 -0000 Subject: [Bug 52543] Re: Backport alsa-1.0.11 References: <20060710145945.27312.32120.malonedeb@gangotri.ubuntu.com> Message-ID: <20060713134407.25598.90334.malone@gangotri.ubuntu.com> Then, unfortunately, I will not be able to do it. The kernel is still open for "bugfixes", so I'll subscribe this bug over to the kernel team and see what they think. I'm sorry about this. ** Changed in: dapper-backports (upstream) Status: Unconfirmed => Rejected ** Also affects: linux-source-2.6.15 (Ubuntu) Importance: Untriaged Status: Unconfirmed -- Backport alsa-1.0.11 https://launchpad.net/bugs/52543 From eaton.lists at gmail.com Thu Jul 13 14:56:02 2006 From: eaton.lists at gmail.com (Brian Eaton) Date: Thu, 13 Jul 2006 14:56:02 -0000 Subject: [Bug 30557] Re: cpu idle time in /proc/stat wrong References: <20060205141542.11709.55517.malonedeb@gandwana.ubuntu.com> Message-ID: <20060713145602.25554.85324.malone@gangotri.ubuntu.com> I've put together a test program that demonstrates the performance degradation introduced by this bug. The attached tar ball contains information about the test program and oprofile runs demonstrating the differences in performance with max_cstate=1 and max_cstate=8. I believe Ubuntu defect 50153 is a duplicate of 30557 because the symptoms and workarounds are the same. However, 50153 is not reproducible in 2.6.15-23. I first noticed the problem in 2.6.15-25. This is in conflict with what some other reporters have experienced, with 30557 first appearing in 2.6.15-15. The attached tar file contains the oprofile reports, the test program, and a more detailed description of my tests. -- cpu idle time in /proc/stat wrong https://launchpad.net/bugs/30557 From ben.collins at ubuntu.com Thu Jul 13 16:22:25 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Thu, 13 Jul 2006 16:22:25 -0000 Subject: [Bug 52302] Re: [Bug 52302] Re: Intel Pro Wireless 3945 is not detected with latest kernel update References: <20060708063621.27257.43382.malonedeb@gangotri.ubuntu.com> <20060713002906.2164.82853.malone@gangotri.ubuntu.com> Message-ID: <1152807746.4773.353.camel@grayson> On Thu, 2006-07-13 at 00:29 +0000, Vijay Kiran Kamuju wrote: > the version of the linux-restricted-modules-686 in my system is 2.6.15.22 > I dont know why the adept is not upgrading it to 2.6.15.24 which is the latest. > It would be gr8 if we both could chat, could you tell me on which irc channel would u be available and timings. It seems like I am repeating this. Please run this command. sudo apt-get install linux-686 -- Intel Pro Wireless 3945 is not detected with latest kernel update https://launchpad.net/bugs/52302 From ben.collins at ubuntu.com Thu Jul 13 16:29:46 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Thu, 13 Jul 2006 16:29:46 -0000 Subject: [Bug 52835] Re: kernel panik linux-image-2.6.15-25-k7 but not linux-image-2.6.15-25-i386 References: <20060713041242.2212.72578.malonedeb@gangotri.ubuntu.com> Message-ID: <20060713162946.25554.27272.malone@gangotri.ubuntu.com> Sounds to me like your /boot might be running low on space. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Unconfirmed => Rejected -- kernel panik linux-image-2.6.15-25-k7 but not linux-image-2.6.15-25-i386 https://launchpad.net/bugs/52835 From ben.collins at ubuntu.com Thu Jul 13 16:29:01 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Thu, 13 Jul 2006 16:29:01 -0000 Subject: [Bug 52543] Re: Backport alsa-1.0.11 References: <20060710145945.27312.32120.malonedeb@gangotri.ubuntu.com> Message-ID: <20060713162901.12867.76959.malone@gandwana.ubuntu.com> Rejecting on the basis that most of the patches in current alsa are actually in dapper kernel. If there's some specific problem, please search the bug reports to see if it is already reported, or open a new bug report. A complete backport of the entire alsa tree will not happen for dapper, and certainly will not be done just to satisfy one problem by one user. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Unconfirmed => Rejected -- Backport alsa-1.0.11 https://launchpad.net/bugs/52543 From ben.collins at ubuntu.com Thu Jul 13 16:30:12 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Thu, 13 Jul 2006 16:30:12 -0000 Subject: [Bug 52855] Re: ThinkPad x60s hangs temporarily at Mounting Root Filesystem References: <20060713100553.12867.62199.malonedeb@gandwana.ubuntu.com> Message-ID: <20060713163012.13020.12788.malone@gandwana.ubuntu.com> Update to latest dapper-security kernel to obtain fixes in regard to this bug. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Unconfirmed => Fix Released -- ThinkPad x60s hangs temporarily at Mounting Root Filesystem https://launchpad.net/bugs/52855 From john.dong at gmail.com Thu Jul 13 17:07:23 2006 From: john.dong at gmail.com (John Dong) Date: Thu, 13 Jul 2006 17:07:23 -0000 Subject: [Bug 52543] Re: Backport alsa-1.0.11 References: <20060710145945.27312.32120.malonedeb@gangotri.ubuntu.com> Message-ID: <20060713170723.25554.55177.malone@gangotri.ubuntu.com> Ben, so is the Dapper kernel capable of supporting this newer version of Alsa, or are you saying the bugfixes in the newer alsa are already pretty much in Dapper's kernel? I can still see a lot of alsa work being done in the Dapper git tree. Thanks for your great work -- Backport alsa-1.0.11 https://launchpad.net/bugs/52543 From john.dong at gmail.com Thu Jul 13 17:21:13 2006 From: john.dong at gmail.com (John Dong) Date: Thu, 13 Jul 2006 17:21:13 -0000 Subject: [Bug 52543] Re: Backport alsa-1.0.11 References: <20060710145945.27312.32120.malonedeb@gangotri.ubuntu.com> Message-ID: <20060713172113.25554.4175.malone@gangotri.ubuntu.com> Never mind; I understand what you're saying now, after re-reading your post. Thanks for your input, Ben. Leaving the Backport request as rejected; file specific ALSA bugs in their appropriate locations. -- Backport alsa-1.0.11 https://launchpad.net/bugs/52543 From adpenaranda at gmail.com Thu Jul 13 18:24:14 2006 From: adpenaranda at gmail.com (=?utf-8?q?Aldous_D=2E_Pe=C3=B1aranda?=) Date: Thu, 13 Jul 2006 18:24:14 -0000 Subject: [Bug 48087] Re: RT61 driver hangs net, if interface accessed while down References: <20060602175004.5009.98804.malonedeb@gandwana.ubuntu.com> Message-ID: <20060713182414.13020.2133.malone@gandwana.ubuntu.com> >From my experience, I was able to make a wireless card work using this driver (rt61) on one laptop but then on another laptop, it hangs and I get a kernel oops. This is what we did on the current laptop: 1. Installed dapper 2. Dapper loads the rt61 module on its own 3. Upon running iwconfig, the terminal "hangs" 4. Checking dmesg reveals an oops message Unfortunately, I don't have the information about the message right now but I do remember something about a NULL (de)reference error or something similar. Once the kernel oopses, it would be necessary to power-cycle the machine. It's a mystery to me as to why this happens since I was able to make the driver work on another laptop. Perhaps some details about the hardware are different? -- RT61 driver hangs net, if interface accessed while down https://launchpad.net/bugs/48087 From osch0001 at umn.edu Thu Jul 13 18:39:48 2006 From: osch0001 at umn.edu (osch0001) Date: Thu, 13 Jul 2006 18:39:48 -0000 Subject: [Bug 50313] Re: mounting root filesystem stuck References: <20060619100018.13137.57015.malonedeb@gandwana.ubuntu.com> Message-ID: <20060713183948.12867.94383.malone@gandwana.ubuntu.com> If I change "Serial (ATA) mode" from "AHCI" to "Compatibility" in the BIOS, I don't experience this problem. -- mounting root filesystem stuck https://launchpad.net/bugs/50313 From ben.collins at ubuntu.com Thu Jul 13 18:50:44 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Thu, 13 Jul 2006 18:50:44 -0000 Subject: [Bug 48087] Re: [Bug 48087] Re: RT61 driver hangs net, if interface accessed while down References: <20060602175004.5009.98804.malonedeb@gandwana.ubuntu.com> <20060713182414.13020.2133.malone@gandwana.ubuntu.com> Message-ID: <1152816645.4773.366.camel@grayson> > 1. Installed dapper > 2. Dapper loads the rt61 module on its own > 3. Upon running iwconfig, the terminal "hangs" > 4. Checking dmesg reveals an oops message Please obtain this oops, and attach it to the bug report (via the web interface, do not paste into a comment). Thanks -- RT61 driver hangs net, if interface accessed while down https://launchpad.net/bugs/48087 From kgad at post.tau.ac.il Thu Jul 13 19:35:31 2006 From: kgad at post.tau.ac.il (ZZZ) Date: Thu, 13 Jul 2006 19:35:31 -0000 Subject: [Bug 50313] Re: mounting root filesystem stuck References: <20060619100018.13137.57015.malonedeb@gandwana.ubuntu.com> Message-ID: <20060713193531.25598.18216.malone@gangotri.ubuntu.com> This solves the problem for me too (How did you think about it?). Does this change have any implications: does it reduce speed, memory, etc. ? -- mounting root filesystem stuck https://launchpad.net/bugs/50313 From pccampos at gmail.com Thu Jul 13 19:39:15 2006 From: pccampos at gmail.com (Pedro) Date: Thu, 13 Jul 2006 19:39:15 -0000 Subject: [Bug 38865] Re: sky2 driver freezing system after ifdown and ifup References: <20060409125752.32313.97119.malonedeb@gandwana.ubuntu.com> Message-ID: <20060713193915.12867.406.malone@gandwana.ubuntu.com> The connection dropping problem is present on 2.6.15-26-686. Should'nt this bug marked as critical as some really important jobs cannot be done on my laptop? As always "modprobe -r sky2; modprobe sky2" corrects the problem temporally. Thanks. -- sky2 driver freezing system after ifdown and ifup https://launchpad.net/bugs/38865 From igarbla at gmail.com Thu Jul 13 19:54:56 2006 From: igarbla at gmail.com (=?utf-8?b?ScOxYWtpIEdhcmPDrWEgQmxhc2Nv?=) Date: Thu, 13 Jul 2006 19:54:56 -0000 Subject: [Bug 50313] Re: mounting root filesystem stuck References: <20060619100018.13137.57015.malonedeb@gandwana.ubuntu.com> Message-ID: <20060713195456.13020.94592.malone@gandwana.ubuntu.com> The problem is solved for me too. -- mounting root filesystem stuck https://launchpad.net/bugs/50313 From matt at mattcaron.net Fri Jul 14 01:50:20 2006 From: matt at mattcaron.net (Matthew Caron) Date: Fri, 14 Jul 2006 01:50:20 -0000 Subject: [Bug 30631] Re: Text mode virtual terminals in normal monitor remain widescreen References: <20060206121111.29848.62956.malonedeb@gangotri.ubuntu.com> Message-ID: <20060714015020.12867.9457.malone@gandwana.ubuntu.com> I have the same problem on 2 different machines, same monitor. Machine 1 - Using ATI Radeon 9200 Card. Machine 2 - Using ATI Rage 128 Card. Both of these are hooked to Dell 2005FPW monitors (16:9 resolution) and exhibit the same "top and bottom cut off" issue. I am using the D-SUB/VGA connection. A third machine, using some variety of ATI card (not sure which), does not have this issue, using the DVI connection. I should also note that in all cases, the BIOS displays fine. Both of the above machines did not have this issue under previous versions of Ubuntu. They have run both Hoary and Breezy with this monitor. This problem only started with dapper. I will try disabling bootsplash and seeing if it helps. -- Text mode virtual terminals in normal monitor remain widescreen https://launchpad.net/bugs/30631 From reynard.list at gmail.com Fri Jul 14 02:14:38 2006 From: reynard.list at gmail.com (Reynard Hilman) Date: Fri, 14 Jul 2006 02:14:38 -0000 Subject: [Bug 52602] Re: Total system freeze when starting gaim References: <20060711035851.19447.7278.malonedeb@gandwana.ubuntu.com> Message-ID: <20060714021438.25598.79912.malone@gangotri.ubuntu.com> after more observations, this happens not only when using gaim. my system freeze very frequently using the k7 image. (just happened twice when downloading update). -- Total system freeze when starting gaim https://launchpad.net/bugs/52602 From eaton.lists at gmail.com Fri Jul 14 04:02:29 2006 From: eaton.lists at gmail.com (Brian Eaton) Date: Fri, 14 Jul 2006 04:02:29 -0000 Subject: [Bug 30557] Re: cpu idle time in /proc/stat wrong References: <20060205141542.11709.55517.malonedeb@gandwana.ubuntu.com> Message-ID: <20060714040229.13020.72950.malone@gandwana.ubuntu.com> This problem still occurs if I use the stock kernel.org 2.6.15 source (or the Debian source) with the Ubuntu 686 config file. I see a couple of possibilities: 1) There are two separate bugs being discussed here. This would explain several discrepancies in the bug reports, particularly why some people see serious performance degradation, and others only reduced battery life. 2) These are the same bug with different environments producing different symptoms. Given that the bug I'm seeing (which is probably the same as the one Steve Bourg is seeing) can be reproduced using the stock kernel source code, should this issue be pushed upstream? -- cpu idle time in /proc/stat wrong https://launchpad.net/bugs/30557 From crimsun at fungus.sh.nu Fri Jul 14 08:20:35 2006 From: crimsun at fungus.sh.nu (Daniel T Chen) Date: Fri, 14 Jul 2006 08:20:35 -0000 Subject: [Bug 34831] Re: Hardlock of entire system (Dapper Flight 5) References: <20060314003317.30057.9117.malonedeb@gandwana.ubuntu.com> Message-ID: <20060714082035.25554.38361.launchpad@gangotri.ubuntu.com> ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Fix Committed => Fix Released -- Hardlock of entire system (Dapper Flight 5) https://launchpad.net/bugs/34831 From msemtd at yahoo.co.uk Fri Jul 14 08:40:01 2006 From: msemtd at yahoo.co.uk (Michael Erskine) Date: Fri, 14 Jul 2006 08:40:01 -0000 Subject: [Bug 52937] "Waiting for root file system..." ...not found after kernel upgrade References: <20060714084001.13020.17138.malonedeb@gandwana.ubuntu.com> Message-ID: <20060714084001.13020.17138.malonedeb@gandwana.ubuntu.com> Public bug reported: I was running dapper on generic Clevo 2200 1GHz laptop and following a kernel upgrade to linux-image-2.6.15-25-686 the machine would do the oft-reported hang at "Waiting for root file system..." followed by dropping to BusyBox shell after a few minutes having not found it. At this stage, all the modules for my IDE (sis5513) seem to be there and /dev/hda1 had appeared. I was able to mount /dev/hda1 (ext3) and chroot to it -- the file system looked fine. Having foolishly removed my older kernels I managed to reinstall a few older versions of 2.6.15 by booting to knoppix chrooting to /dev/hda1 and using aptitude. None of the older kernels would find the root file system either. I got a lot of help on IRC (thanks Matthew G!) but I'm giving up on it - I've got to get a replacement machine set up in time for LRL'06. I still have the machine in this state if any more information is needed, however it isn't very accessible as it's built into an arcade machine! ** Affects: linux-source-2.6.15 (Ubuntu) Importance: Untriaged Status: Unconfirmed -- "Waiting for root file system..." ...not found after kernel upgrade https://launchpad.net/bugs/52937 From schofield at ftw.at Fri Jul 14 09:37:55 2006 From: schofield at ftw.at (edschofield) Date: Fri, 14 Jul 2006 09:37:55 -0000 Subject: [Bug 52943] Re: Ejecting firewire HD (iPod) freezes kernel References: <20060714093057.13020.36308.malonedeb@gandwana.ubuntu.com> Message-ID: <20060714093755.13020.91176.malone@gandwana.ubuntu.com> I forgot to add: I do not have any binary-only modules loaded into the kernel. -- Ejecting firewire HD (iPod) freezes kernel https://launchpad.net/bugs/52943 From stefan at hinker.net Fri Jul 14 10:38:46 2006 From: stefan at hinker.net (Stefan Hinker) Date: Fri, 14 Jul 2006 10:38:46 -0000 Subject: [Bug 27852] Re: I/O errors when connecting SD (secure digital) flash cards References: <20060113151935.29386.40252.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060714103846.12867.52626.malone@gandwana.ubuntu.com> After some experiments, I have some new details, although not exactly hard facts. I have absolutly no problem accessing the SD-card when reading or writing with commandline tools (cp). This works as it should. However, when using Konqueror to drag and drop files to the device, the card disapears spontaniously. This even caused severe file system corruption (FAT32) on the card!! Not much to go on, I'll continue to investigate this. However, I thought I would update everyone here. stefan -- I/O errors when connecting SD (secure digital) flash cards https://launchpad.net/bugs/27852 From amermod at yahoo.com Fri Jul 14 11:08:30 2006 From: amermod at yahoo.com (Alex Mermod) Date: Fri, 14 Jul 2006 11:08:30 -0000 Subject: [Bug 37287] Re: No sound on Inspiron 9400 with Dapper References: <20060330074302.7863.60106.malonedeb@gangotri.ubuntu.com> Message-ID: <20060714110830.25598.606.malone@gangotri.ubuntu.com> Same problem with Dell Inspiron 9300. $ tail -2 /proc/asound/oss/sndstat Mixers: 0: SigmaTel STAC9750,51 lspci: [...] 0000:00:1e.2 Multimedia audio controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Audio Controller (rev 03) [...] -- No sound on Inspiron 9400 with Dapper https://launchpad.net/bugs/37287 From hk at haraldkl.de Fri Jul 14 11:19:10 2006 From: hk at haraldkl.de (haraldkl) Date: Fri, 14 Jul 2006 11:19:10 -0000 Subject: [Bug 50313] Re: mounting root filesystem stuck References: <20060619100018.13137.57015.malonedeb@gandwana.ubuntu.com> Message-ID: <20060714111910.25554.7445.malone@gangotri.ubuntu.com> Thanks osch0001, with that change in BIOS I don't experience the problem any longer, too. -- mounting root filesystem stuck https://launchpad.net/bugs/50313 From zwierzak220 at neostrada.pl Fri Jul 14 12:57:12 2006 From: zwierzak220 at neostrada.pl (Radek) Date: Fri, 14 Jul 2006 12:57:12 -0000 Subject: [Bug 52900] Re: eth0 bad working to linux-headers-2.6.15-26-k7 References: <20060713184533.25598.92715.malonedeb@gangotri.ubuntu.com> Message-ID: <20060714125712.12867.78952.launchpad@gandwana.ubuntu.com> ** Visibility changed to: Public -- eth0 bad working to linux-headers-2.6.15-26-k7 https://launchpad.net/bugs/52900 From scottlegs at gmail.com Fri Jul 14 13:18:13 2006 From: scottlegs at gmail.com (krazyd) Date: Fri, 14 Jul 2006 13:18:13 -0000 Subject: [Bug 37387] Re: Failed kernel bootload References: <20060330202042.5415.29551.malonedeb@gangotri.ubuntu.com> Message-ID: <20060714131813.12867.14816.malone@gandwana.ubuntu.com> Ok. I think I have the same problem here: First, I am trying to run Dapper on an ASUS A6000KT notebook. Relevant specs are here: http://au.asus.com/products4.aspx?modelmenu=2&model=1035&l1=5&l2=24&l3=134 I have the same problem where if there is anything plugged into a usb port (mouse, thumb drive, external HD etc.) Ubuntu will fail to boot, freezing at the 'Unpacking/loading kernel' message. The current (as of posting) Dapper kernel has this problem. Using the recovery mode I manually copied the boot messages directly before the freeze. These are given below: [4294670.460000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [4294670.461000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [4294670.483000] Memory: 1028576k/1048384k available (1976k kernel code, 19156k reserved, 606k data, 288k init, 130880k highmem) [4294670.483000] Checking if this processor honours the WP bit even in supervisor mode... Ok. [4294670.544000] Calibrating delay using timer specific routine.. 3601.53 BogoMIPS (|pj=1800769) [4294670.544000] Security Framework v1.0.0 initialized [4294670.544000] SELinux: Disabled at boot. [4294670.544000] Mount-cache hash table entries: 512 [4294670.544000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [4294670.544000] CPU: L2 Cache: 1024K (64 bytes/line) [4294670.544000] mtrr: v2.0 (20020519) [4294670.544000] CPU: AMD Turion(tm) 64 Mobile Technology MT-34 stepping 02 [4294670.544000] Enabling fast FPU save and restore... done. [4294670.544000] Enabling unmasked SIMD FPU exception support... done. [4294670.544000] Checking 'hlt' instructions... OK. [4294670.548000] checking if image is initramfs... it is [4294670.110000] Freeing initrd memory: 6836k freed [4294670.119000] ACPI: Looking for DSDT ... not found! [4294670.155000] ENABLING IO-APIC IRQs What I believe to be the same problem has been reported for another ASUS notebook on the forums: http://ubuntuforums.org/showthread.php?t=211138 Workarounds include: * unplugging all usb devices for every boot. * adding 'acpi=off' to the boot command * disabling USB devices in BIOS However none of these are very satisfactory :(. Hope this info is helpful. :) Thanks. -- Failed kernel bootload https://launchpad.net/bugs/37387 From uwe.menges at web.de Fri Jul 14 13:47:04 2006 From: uwe.menges at web.de (Uwe Menges) Date: Fri, 14 Jul 2006 13:47:04 -0000 Subject: [Bug 39414] Re: syslog is flooded with messages after connecting bluetooth usb dongle References: <20060413092856.13165.25179.malonedeb@gandwana.ubuntu.com> Message-ID: <20060714134704.25554.7292.malone@gangotri.ubuntu.com> Same problem with the exactly same dongle. lsusb: Bus 003 Device 004: ID 0400:080a National Semiconductor Corp. Running 2.6.15-26-686 #1 SMP PREEMPT Fri Jul 7 19:48:22 UTC 2006 (dapper 6.06). ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Unconfirmed => Confirmed -- syslog is flooded with messages after connecting bluetooth usb dongle https://launchpad.net/bugs/39414 From ondrej at sury.org Fri Jul 14 14:04:32 2006 From: ondrej at sury.org (=?utf-8?b?T25kxZllaiBTdXLDvQ==?=) Date: Fri, 14 Jul 2006 14:04:32 -0000 Subject: [Bug 52546] Re: original HP keybord bundled with HP dc7600 doesn't work References: <20060710151635.27257.37195.malonedeb@gangotri.ubuntu.com> Message-ID: <20060714140432.13020.13725.malone@gandwana.ubuntu.com> Here is dmesg generated by: a) unplugging usbps2 conv b) rebooting c) plugging usbps2 afterboot d) unplugging ps2 keyboard d) plugging ps2 keyboard into usbps2 convertor since it doesn't work at all Ondrej. -- original HP keybord bundled with HP dc7600 doesn't work https://launchpad.net/bugs/52546 From uwe.menges at web.de Fri Jul 14 14:51:20 2006 From: uwe.menges at web.de (Uwe Menges) Date: Fri, 14 Jul 2006 14:51:20 -0000 Subject: [Bug 39414] Re: syslog is flooded with messages after connecting bluetooth usb dongle References: <20060413092856.13165.25179.malonedeb@gandwana.ubuntu.com> Message-ID: <20060714145120.12867.83714.launchpad@gandwana.ubuntu.com> ** Bug watch added: Linux Kernel Bug Tracker #6833 http://bugzilla.kernel.org/show_bug.cgi?id=6833 ** Also affects: linux (upstream) via http://bugzilla.kernel.org/show_bug.cgi?id=6833 Importance: Unknown Status: Unknown -- syslog is flooded with messages after connecting bluetooth usb dongle https://launchpad.net/bugs/39414 From sistpoty at stud.uni-erlangen.de Fri Jul 14 14:56:22 2006 From: sistpoty at stud.uni-erlangen.de (StefanPotyra) Date: Fri, 14 Jul 2006 14:56:22 -0000 Subject: [Bug 37554] Re: Konica Minolta PagePro 1300W USB Printing problem References: <20060401062148.5415.53902.malonedeb@gangotri.ubuntu.com> Message-ID: <20060714145622.25598.76477.launchpad@gangotri.ubuntu.com> ** Bug 30282 has been marked a duplicate of this bug -- Konica Minolta PagePro 1300W USB Printing problem https://launchpad.net/bugs/37554 From sistpoty at stud.uni-erlangen.de Fri Jul 14 14:56:22 2006 From: sistpoty at stud.uni-erlangen.de (StefanPotyra) Date: Fri, 14 Jul 2006 14:56:22 -0000 Subject: [Bug 30282] Re: Minolta PagePro 1300W doesn't work References: <20060202023117.11050.33380.malonedeb@gandwana.ubuntu.com> Message-ID: <20060714145622.25598.39620.launchpad@gangotri.ubuntu.com> *** This bug is a duplicate of bug 37554 *** ** This bug has been marked a duplicate of bug 37554 Konica Minolta PagePro 1300W USB Printing problem -- Minolta PagePro 1300W doesn't work https://launchpad.net/bugs/30282 From mark at canonical.com Fri Jul 14 17:53:15 2006 From: mark at canonical.com (Mark Shuttleworth) Date: Fri, 14 Jul 2006 17:53:15 -0000 Subject: [Bug 43661] Re: [Bug 43661] Re: ThinkPad X60: select() to /dev/rtc to wait for clock tick timed out References: <445F9367.80207@canonical.com> <20060712111734.2164.25622.malone@gangotri.ubuntu.com> Message-ID: <44B7DA0B.3000704@canonical.com> Interesting. I get the same results from hwclock -r and -w, with or without --directisa. And this bug does not seem to appear on my system any more. Is there any way to fix the system so that it knows when to use directisa? Mark -- ThinkPad X60: select() to /dev/rtc to wait for clock tick timed out https://launchpad.net/bugs/43661 From msemtd at yahoo.co.uk Fri Jul 14 18:28:08 2006 From: msemtd at yahoo.co.uk (Michael Erskine) Date: Fri, 14 Jul 2006 18:28:08 -0000 Subject: [Bug 52937] Re: "Waiting for root file system..." ...not found after kernel upgrade References: <20060714084001.13020.17138.malonedeb@gandwana.ubuntu.com> Message-ID: <20060714182808.25598.18518.malone@gangotri.ubuntu.com> OK, I have it working again after a few days of teeth-gnashing. I followed a combination of hints from http://forums.debian.net/viewtopic.php?t=7295, Bug #32446, Bug #32123, and some others I've forgot. I removed all kernels, udev, initramfs- tools, then reinstalled udev, initramfs-tools by installing ubuntu- minimal, then installed linux-image-686 and it rebuilt the initrd which finally worked. I'm really pleased that it's usable again - and LugRadio Live 2006 has its MAME machine back! -- "Waiting for root file system..." ...not found after kernel upgrade https://launchpad.net/bugs/52937 From quenouille.nicolas at wanadoo.fr Fri Jul 14 19:02:42 2006 From: quenouille.nicolas at wanadoo.fr (QUENOUILLE Nicolas) Date: Fri, 14 Jul 2006 19:02:42 -0000 Subject: [Bug 52953] Re: Proprietary Firmware in default Linux-image-xxx References: <20060714111648.13020.96743.malonedeb@gandwana.ubuntu.com> Message-ID: <20060714190242.13020.73743.launchpad@gandwana.ubuntu.com> ** Changed in: linux-meta (Ubuntu) Status: Unconfirmed => Confirmed -- Proprietary Firmware in default Linux-image-xxx https://launchpad.net/bugs/52953 From evil at g-house.de Fri Jul 14 19:25:03 2006 From: evil at g-house.de (Christian) Date: Fri, 14 Jul 2006 19:25:03 -0000 Subject: [Bug 32597] Re: Hang while booting References: <20060223120455.14968.80193.malonedeb@gangotri.ubuntu.com> Message-ID: <20060714192503.13020.32063.malone@gandwana.ubuntu.com> Well, I still notice a 3 minute delay during bootup with udev-079-0ubuntu34. I thought it was a kernel bug and reported this one here: http://lkml.org/lkml/2006/7/12/301 but Kay told me that it might be a udev/userspace bug. The thing is: it goes away with 2.6.14 and was introduced somewhere during the 2.6.15 development (see my report for the exact timeline, along with mre logs) The last thing I see on the console is "Loading hardware drivers...". then I have to wait 3 minutes until booting continues as usual and all is fine and working.... Thank you for your time, Christian. -- Hang while booting https://launchpad.net/bugs/32597 From roger_cooley at ftn.fedex.com Fri Jul 14 19:48:58 2006 From: roger_cooley at ftn.fedex.com (Roger Cooley) Date: Fri, 14 Jul 2006 19:48:58 -0000 Subject: [Bug 36461] Re: XOrg dualhead regression References: <20060324174628.6253.87338.malonedeb@gandwana.ubuntu.com> Message-ID: <20060714194858.13020.7414.malone@gandwana.ubuntu.com> I've been having a problem with my duel-head configuration since my upgrade to Dapper. I'm not sure if it is related to this issue. I was able to work around it by selecting the 2.6.12-10-386 kernel at boot. X is broken for me with 2.6.15-25-386 and 2.6.15-26-386. I'm hoping this will help others, let me know if I should supply more info. Thanks. - Roger -- XOrg dualhead regression https://launchpad.net/bugs/36461 From dennis at kaarsemaker.net Fri Jul 14 19:50:50 2006 From: dennis at kaarsemaker.net (Dennis Kaarsemaker) Date: Fri, 14 Jul 2006 19:50:50 -0000 Subject: [Bug 52953] Re: Proprietary Firmware in default Linux-image-xxx References: <20060714111648.13020.96743.malonedeb@gandwana.ubuntu.com> Message-ID: <20060714195050.12867.60792.malone@gandwana.ubuntu.com> See Ubuntu policy - this is on purpose and not a bug. ** Changed in: linux-meta (Ubuntu) Status: Confirmed => Rejected -- Proprietary Firmware in default Linux-image-xxx https://launchpad.net/bugs/52953 From evil at g-house.de Fri Jul 14 20:20:12 2006 From: evil at g-house.de (Christian) Date: Fri, 14 Jul 2006 20:20:12 -0000 Subject: [Bug 32597] Re: Hang while booting References: <20060223120455.14968.80193.malonedeb@gangotri.ubuntu.com> Message-ID: <20060714202012.12867.80834.launchpad@gandwana.ubuntu.com> ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Unconfirmed => Confirmed -- Hang while booting https://launchpad.net/bugs/32597 From rondom at rondom.de Fri Jul 14 20:33:59 2006 From: rondom at rondom.de (Andreas Gnau) Date: Fri, 14 Jul 2006 20:33:59 -0000 Subject: [Bug 51611] Re: ATI Radeon X300 not correctly recognized References: <20060702172641.17086.26128.malonedeb@gangotri.ubuntu.com> Message-ID: <20060714203400.25598.36300.launchpad@gangotri.ubuntu.com> ** Bug watch added: Freedesktop Bugzilla #2827 https://bugs.freedesktop.org/show_bug.cgi?id=2827 ** Also affects: xserver-xorg-driver-ati (upstream) via https://bugs.freedesktop.org/show_bug.cgi?id=2827 Importance: Unknown Status: Unknown ** Bug watch added: Debian Bug tracker #318948 http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=318948 ** Also affects: xserver-xorg-driver-ati (Debian) via http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=318948 Importance: Unknown Status: Unknown -- ATI Radeon X300 not correctly recognized https://launchpad.net/bugs/51611 From rondom at rondom.de Fri Jul 14 20:40:53 2006 From: rondom at rondom.de (Andreas Gnau) Date: Fri, 14 Jul 2006 20:40:53 -0000 Subject: [Bug 51611] Re: ATI Radeon X300 not correctly recognized References: <20060702172641.17086.26128.malonedeb@gangotri.ubuntu.com> Message-ID: <20060714204053.25554.6701.malone@gangotri.ubuntu.com> >From what I've heard a fix for this in cvs (see the debian-bugreport). Oh, and could someone please remove that relationship with linux-source? ** Changed in: xserver-xorg-driver-ati (Debian) Sourcepackagename: xserver-xorg-driver-ati => xserver-xorg -- ATI Radeon X300 not correctly recognized https://launchpad.net/bugs/51611 From rutager at myrealbox.com Fri Jul 14 21:00:29 2006 From: rutager at myrealbox.com (Rutager) Date: Fri, 14 Jul 2006 21:00:29 -0000 Subject: [Bug 47561] Re: ACPI-battery monitoring stops working after some time References: <20060530194416.5009.28356.malonedeb@gandwana.ubuntu.com> Message-ID: <20060714210029.25554.90017.malone@gangotri.ubuntu.com> This bug affects my hp nc6000 also. Using 2.6.15-26-686. -- ACPI-battery monitoring stops working after some time https://launchpad.net/bugs/47561 From flo_54321 at web.de Fri Jul 14 21:58:54 2006 From: flo_54321 at web.de (infu) Date: Fri, 14 Jul 2006 21:58:54 -0000 Subject: [Bug 48395] Re: ipw3945 produces 99% cpu, making my laptop unusable References: <20060604183717.4978.25428.malonedeb@gandwana.ubuntu.com> Message-ID: <20060714215854.13020.46463.malone@gandwana.ubuntu.com> Hello! I have the same problems running Ubuntu 6.06 Dapper on an IBM Thinkpad Z61m with the Kernel 2.6.15-26-686 #1 SMP PREEMPT Fri Jul 7 19:48:22 UTC 2006 i686 GNU/Linux One processor is at 100%, the other is in normal operation. I haven't found a solution for this when usign the smp-kernel together with these restricted modules. -- ipw3945 produces 99% cpu, making my laptop unusable https://launchpad.net/bugs/48395 From c.charlot at freesurf.fr Fri Jul 14 22:00:38 2006 From: c.charlot at freesurf.fr (Christophe Charlot) Date: Fri, 14 Jul 2006 22:00:38 -0000 Subject: [Bug 45928] Re: High error rate on UMTS modem References: <20060521215943.23797.25678.malonedeb@gandwana.ubuntu.com> Message-ID: <20060714220038.12867.28402.malone@gandwana.ubuntu.com> No improvement with kernel 2.6.15-2-6... :-( -- High error rate on UMTS modem https://launchpad.net/bugs/45928 From crimsun at fungus.sh.nu Fri Jul 14 23:03:18 2006 From: crimsun at fungus.sh.nu (Daniel T Chen) Date: Fri, 14 Jul 2006 23:03:18 -0000 Subject: [Bug 37287] Re: No sound on Inspiron 9400 with Dapper References: <20060330074302.7863.60106.malonedeb@gangotri.ubuntu.com> Message-ID: <20060714230318.13020.75340.malone@gandwana.ubuntu.com> @Alex Mermod: Please be careful with adding unrelated comments. Your codec is not at all related to this bug report, nor do you have an HDA chipset. Please file a separate (new) bug, and attach information from ``uname -r && amixer''. -- No sound on Inspiron 9400 with Dapper https://launchpad.net/bugs/37287 From ubuntu at paul.sladen.org Fri Jul 14 23:08:36 2006 From: ubuntu at paul.sladen.org (Paul Sladen) Date: Fri, 14 Jul 2006 23:08:36 -0000 Subject: [Bug 6367] Re: udev enumeration should use /sys/bus not /sys/devices References: <20060102180911.29335.17628.malonedeb@gangotri.ubuntu.com> Message-ID: <20060714230836.25598.16125.malone@gangotri.ubuntu.com> For those still wondering; The workaround for this issue involves specifying the partition to boot from by ID, rather than the transient location: 1. Boot a desktop/LiveCD. 2. Run sudo /sbin/dumpe2fs /dev/sdX | grep UUID 3. tell 'grub' or 'lilo' to boot with that ID: linux ... root=UUID=d4c51a2a-d93f-4dc1-8717-9c3cdb4d41ce and also adjust this in: /boot/grub/menu.lst -- udev enumeration should use /sys/bus not /sys/devices https://launchpad.net/bugs/6367 From ubuntu.demon at gmail.com Sat Jul 15 00:24:13 2006 From: ubuntu.demon at gmail.com (Roald Hopman) Date: Sat, 15 Jul 2006 00:24:13 -0000 Subject: [Bug 6367] Re: udev enumeration should use /sys/bus not /sys/devices References: <20060102180911.29335.17628.malonedeb@gangotri.ubuntu.com> Message-ID: <20060715002413.13020.36683.malone@gandwana.ubuntu.com> Paul thank you very much for this workaround! There are a lot of people on the forums having problems with this bug. I've asked them test this workaround by you (Paul Sladen) and report (meaningful) results either here or in this thread : http://ubuntuforums.org/showthread.php?p=1257154 -- udev enumeration should use /sys/bus not /sys/devices https://launchpad.net/bugs/6367 From eaton.lists at gmail.com Sat Jul 15 01:20:53 2006 From: eaton.lists at gmail.com (Brian Eaton) Date: Sat, 15 Jul 2006 01:20:53 -0000 Subject: [Bug 30557] Re: cpu idle time in /proc/stat wrong References: <20060205141542.11709.55517.malonedeb@gandwana.ubuntu.com> Message-ID: <20060715012053.25554.8630.malone@gangotri.ubuntu.com> Well, my problem goes away if I change my config from CONFIG_HZ_250 to CONFIG_HZ_1000. The change from 1000 to 250 was done in 2.5.15-24, which corresponds nicely to when I started to see problems with sluggish performance. * i386/amd64: Change HZ=1000 to HZ=250. The high frequency was causing high power consumption on some laptops, and also some latency under certain I/O loads. Even when I rebuild with CONFIG_HZ_1000, the idle time in /proc/stat continues to go up very slowly. Seems more and more likely we're talking about different problems. Nonetheless, I'd much prefer it if the ubuntu 686 kernel didn't hose X performance on my laptop. I doubt regressing the "HZ=250" change would count as progress, but if anyone has suggestions for further research into why HZ=250 causes problems on my machine, I'd be interested in hearing them. I'd also be interested whether anybody else reporting issues sees a change when HZ is set to 1000 instead of 250. -- cpu idle time in /proc/stat wrong https://launchpad.net/bugs/30557 From ben.collins at ubuntu.com Sat Jul 15 01:46:42 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Sat, 15 Jul 2006 01:46:42 -0000 Subject: [Bug 52937] Re: "Waiting for root file system..." ...not found after kernel upgrade References: <20060714084001.13020.17138.malonedeb@gandwana.ubuntu.com> Message-ID: <20060715014642.25554.26855.malone@gangotri.ubuntu.com> The easiest thing would have been to do: sudo update-initramfs -u -k 2.6.15-25-686 Glad things are working for you now. Marking as rejected since you were able to get it working. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Unconfirmed => Rejected -- "Waiting for root file system..." ...not found after kernel upgrade https://launchpad.net/bugs/52937 From scottlegs at gmail.com Sat Jul 15 05:07:39 2006 From: scottlegs at gmail.com (krazyd) Date: Sat, 15 Jul 2006 05:07:39 -0000 Subject: [Bug 37387] Re: Failed kernel bootload References: <20060330202042.5415.29551.malonedeb@gangotri.ubuntu.com> Message-ID: <20060715050739.25554.7877.launchpad@gangotri.ubuntu.com> ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Needs Info => Confirmed -- Failed kernel bootload https://launchpad.net/bugs/37387 From bugwatch at bugs.launchpad.net Sat Jul 15 06:30:53 2006 From: bugwatch at bugs.launchpad.net (Bug Watch Updater) Date: Sat, 15 Jul 2006 06:30:53 -0000 Subject: [Bug 51611] Re: ATI Radeon X300 not correctly recognized References: <20060702172641.17086.26128.malonedeb@gangotri.ubuntu.com> Message-ID: <20060715063105.9255.14203.launchpad@gangotri.ubuntu.com> ** Changed in: xserver-xorg (Debian) Status: Unknown => Fix Released ** Changed in: xserver-xorg-driver-ati (upstream) Status: Unknown => Fix Released -- ATI Radeon X300 not correctly recognized https://launchpad.net/bugs/51611 From bugwatch at bugs.launchpad.net Sat Jul 15 06:36:04 2006 From: bugwatch at bugs.launchpad.net (Bug Watch Updater) Date: Sat, 15 Jul 2006 06:36:04 -0000 Subject: [Bug 39414] Re: syslog is flooded with messages after connecting bluetooth usb dongle References: <20060413092856.13165.25179.malonedeb@gandwana.ubuntu.com> Message-ID: <20060715063608.9255.56908.launchpad@gangotri.ubuntu.com> ** Changed in: linux (upstream) Status: Unknown => Confirmed -- syslog is flooded with messages after connecting bluetooth usb dongle https://launchpad.net/bugs/39414 From jp.proux at gmail.com Sat Jul 15 07:45:21 2006 From: jp.proux at gmail.com (jpp) Date: Sat, 15 Jul 2006 07:45:21 -0000 Subject: [Bug 22238] Re: Use later version of acx References: <20060113141710.21012.7837.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060715074521.25598.17236.malone@gangotri.ubuntu.com> every things was ok this default ubuntu 6.6 installation (2.6.15-23), but with the last kernel upgrade (2.6.15-25 or 26), there is a bug and in log. acx: firmware 'Rev 2.3.1.31' does not work well with this driver That the difference between 23 and 25 kernel ? Tanks. -- Use later version of acx https://launchpad.net/bugs/22238 From andrewshawcare at gmail.com Sat Jul 15 08:12:39 2006 From: andrewshawcare at gmail.com (Andrew Shaw Care) Date: Sat, 15 Jul 2006 08:12:39 -0000 Subject: [Bug 34902] Re: Ralink Wireless USB/PCMCIA/PCI hangs PC References: <20060314143545.30082.52680.malonedeb@gandwana.ubuntu.com> Message-ID: <20060715081239.25598.7314.malone@gangotri.ubuntu.com> I don't know if there is a solution to this bug as of yet, but I've attached a guide (borrowing heavily from the Ubuntu Wiki) that should run through the process of setting up the D-Link DWL-G122 Wireless USB Adapter using ndiswrapper. -- Ralink Wireless USB/PCMCIA/PCI hangs PC https://launchpad.net/bugs/34902 From nct at ysagoon.com Sat Jul 15 09:14:23 2006 From: nct at ysagoon.com (=?utf-8?q?St=C3=A9phane_Magnenat?=) Date: Sat, 15 Jul 2006 09:14:23 -0000 Subject: [Bug 34831] Re: Hardlock of entire system (Dapper Flight 5) References: <20060314003317.30057.9117.malonedeb@gandwana.ubuntu.com> Message-ID: <20060715091423.12867.42988.malone@gandwana.ubuntu.com> I confirm that I still have the freeze with emu10k1 and 2.6.15-26-686 -- Hardlock of entire system (Dapper Flight 5) https://launchpad.net/bugs/34831 From kha-launchpad at hemma.treskal.com Sat Jul 15 09:55:29 2006 From: kha-launchpad at hemma.treskal.com (=?utf-8?q?Karl_Hasselstr=C3=B6m?=) Date: Sat, 15 Jul 2006 09:55:29 -0000 Subject: [Bug 52553] Re: Kernel panic - not syncing: IO-APIC + timer doesn't work! References: <20060710155757.27312.91477.malonedeb@gangotri.ubuntu.com> Message-ID: <20060715095529.25554.37447.malone@gangotri.ubuntu.com> I'm seeing this exact problem as well, on the same hardware. The noapic boot option does seem to solve the problem for me, but unfortunately it also makes the mouse pointer very sluggish (I imagine it doesn't get polled often enough by the kernel, or something). The contrast with os X (or, for that matter, linux on the few occasions I do manage to boot it withot noapic) is striking. I tried attaching a usb mouse, but it has the same problem as the trackpad. -- Kernel panic - not syncing: IO-APIC + timer doesn't work! https://launchpad.net/bugs/52553 From ari.niemi at gmail.com Sat Jul 15 10:34:43 2006 From: ari.niemi at gmail.com (niekko) Date: Sat, 15 Jul 2006 10:34:43 -0000 Subject: [Bug 50588] Re: Slow boot time since update to kernel 2.6.15-25-686 References: <20060621173616.23311.67847.malonedeb@gangotri.ubuntu.com> Message-ID: <20060715103443.25598.81630.malone@gangotri.ubuntu.com> T60 with the same problem. /proc/mounts: rootfs / rootfs rw 0 0 none /sys sysfs rw 0 0 none /proc proc rw,nodiratime 0 0 udev /dev tmpfs rw 0 0 /dev/mapper/LVMGroup-root / reiserfs rw 0 0 /dev/mapper/LVMGroup-root /dev/.static/dev reiserfs rw 0 0 tmpfs /var/run tmpfs rw 0 0 tmpfs /var/lock tmpfs rw 0 0 usbfs /proc/bus/usb usbfs rw 0 0 tmpfs /lib/modules/2.6.15-26-686/volatile tmpfs rw 0 0 devpts /dev/pts devpts rw 0 0 tmpfs /dev/shm tmpfs rw 0 0 tmpfs /var/run tmpfs rw 0 0 tmpfs /var/lock tmpfs rw 0 0 /dev/sda1 /boot ext3 rw,data=ordered 0 0 /dev/mapper/LVMGroup-home /home ext3 rw,data=ordered 0 0 /etc/fstab: # /etc/fstab: static file system information. # # proc /proc proc defaults 0 0 /dev/mapper/LVMGroup-root / reiserfs defaults 0 1 /dev/sda1 /boot ext3 defaults 0 2 /dev/mapper/LVMGroup-home /home ext3 defaults 0 2 /dev/sda2 none swap sw 0 0 /dev/hda /media/cdrom0 udf,iso9660 user,noauto 0 0 -- Slow boot time since update to kernel 2.6.15-25-686 https://launchpad.net/bugs/50588 From stephane.tranchemer at devinci.fr Sat Jul 15 10:36:57 2006 From: stephane.tranchemer at devinci.fr (Corsaire01) Date: Sat, 15 Jul 2006 10:36:57 -0000 Subject: [Bug 43961] Re: Power down after shutdown does not work... References: <20060510072310.21520.62027.malonedeb@gandwana.ubuntu.com> Message-ID: <20060715103657.25554.58337.malone@gangotri.ubuntu.com> update done today, switching to kernel 2.6.15-26-amd64-generic. No change: -"Will now halt" -black screen but power remains -motherboard starting to beep after a while (you have to completely remove the power cord or press reset to restart cleanly) -- Power down after shutdown does not work... https://launchpad.net/bugs/43961 From cantormath at hotmail.com Sat Jul 15 13:23:02 2006 From: cantormath at hotmail.com (Chris) Date: Sat, 15 Jul 2006 13:23:02 -0000 Subject: [Bug 53052] Laptop powers-off unexpectedly References: <20060715122842.1979.84791.malonedeb@gangotri.ubuntu.com> Message-ID: <20060715132302.2126.93267.launchpad@canonical@gandwana.ubuntu.com> Public bug reported: Working on a Toshiba A-75, ATI internals lspci http://cantormath.com/lspci.txt lshw.txt http://cantormath.com/lshw.txt kern.log http://cantormath.com/kern_log.txt syslog http://cantormath.com/syslog.txt The problem is simple. I leave the machine, come back a hour later, and the machine is turned off. I am able to site on the machine for a few hours but eventually, the machine will just poweroff, without warning. -These are the errors I am most concerned about. "Jul 9 12:15:53 cantormath-laptop kernel: [4301519.518000] ibm_acpi: ec object not found Jul 9 12:16:35 cantormath-laptop kernel: [4301560.924000] ACPI-0284: *** Error: Region EmbeddedControl(3) has no handler Jul 9 12:16:35 cantormath-laptop kernel: [4301560.924000] ACPI-0517: *** Error: Method parse/execution failed [\_SB_.EPWR.PCLK] (Node db8a7f60), AE_NOT_EXIST Jul 9 12:16:35 cantormath-laptop kernel: [4301560.924000] ACPI-0517: *** Error: Method parse/execution failed [\_SB_.PCI0.LPC0.EC0_._Q1E] (Node dbf56e20), AE_NOT_EXIST" ** Affects: linux-source-2.6.15 (Ubuntu) Importance: Untriaged Assignee: Ubuntu Kernel ACPI Team Status: Confirmed -- Laptop powers-off unexpectedly https://launchpad.net/bugs/53052 From mjg59 at codon.org.uk Sat Jul 15 13:23:01 2006 From: mjg59 at codon.org.uk (Matthew Garrett) Date: Sat, 15 Jul 2006 13:23:01 -0000 Subject: [Bug 53052] Re: Laptop powers-off unexpectedly References: <20060715122842.1979.84791.malonedeb@gangotri.ubuntu.com> Message-ID: <20060715132301.2126.78425.launchpad@gandwana.ubuntu.com> ** Changed in: acpi (Ubuntu) Sourcepackagename: acpi => linux-source-2.6.15 -- Laptop powers-off unexpectedly https://launchpad.net/bugs/53052 From mdz at ubuntu.com Sat Jul 15 15:45:47 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Sat, 15 Jul 2006 15:45:47 -0000 Subject: [Bug 53048] Re: Kernel 2.6 bug local race (proc) References: <20060715105847.13020.14485.malonedeb@gandwana.ubuntu.com> Message-ID: <20060715154547.2126.46232.malone@gandwana.ubuntu.com> This is the same bug published on full-disclosure recently ** Changed in: Ubuntu Sourcepackagename: None => linux-source-2.6.15 ** Visibility changed to: Public -- Kernel 2.6 bug local race (proc) https://launchpad.net/bugs/53048 From gnomefreak at gmail.com Sat Jul 15 16:05:53 2006 From: gnomefreak at gmail.com (John Vivirito) Date: Sat, 15 Jul 2006 16:05:53 -0000 Subject: [Bug 52416] Re: Kernel panic on startup References: <20060709101808.27312.14390.malonedeb@gangotri.ubuntu.com> Message-ID: <20060715160553.1979.71247.launchpad@gangotri.ubuntu.com> ** Changed in: kernel-package (Ubuntu) Status: Fix Committed => Fix Released -- Kernel panic on startup https://launchpad.net/bugs/52416 From eaton.lists at gmail.com Sat Jul 15 16:43:02 2006 From: eaton.lists at gmail.com (Brian Eaton) Date: Sat, 15 Jul 2006 16:43:02 -0000 Subject: [Bug 30557] Re: cpu idle time in /proc/stat wrong References: <20060205141542.11709.55517.malonedeb@gandwana.ubuntu.com> Message-ID: <20060715164302.1979.57168.malone@gangotri.ubuntu.com> Neither bug, the /proc/stat issue or the lousy X performance, is reproducible in 2.6.17.5. I'm going to try to figure out which kernel rev resolved the issue(s). -- cpu idle time in /proc/stat wrong https://launchpad.net/bugs/30557 From felix.rommel at web.de Sat Jul 15 16:45:09 2006 From: felix.rommel at web.de (felix.rommel) Date: Sat, 15 Jul 2006 16:45:09 -0000 Subject: [Bug 53068] Re: After Kernel update (2.6.15-26-k7) external USB drive isn't recognized References: <20060715164307.1931.66026.malonedeb@gangotri.ubuntu.com> Message-ID: <20060715164509.1979.49145.malone@gangotri.ubuntu.com> -- After Kernel update (2.6.15-26-k7) external USB drive isn't recognized https://launchpad.net/bugs/53068 From gnomefreak at gmail.com Sat Jul 15 16:56:58 2006 From: gnomefreak at gmail.com (John Vivirito) Date: Sat, 15 Jul 2006 16:56:58 -0000 Subject: [Bug 52416] Re: Kernel panic on startup References: <20060709101808.27312.14390.malonedeb@gangotri.ubuntu.com> Message-ID: <20060715165658.1931.53054.malone@gangotri.ubuntu.com> Same issue with 2.6.17-5-386 to fix this same as above but still after update-grub go into /boot/grub/menu.lst and change the 2.6.17-5 kernel entry to look at sda instead of hda than reboot (dont update-grub after changing hda to sda. reboot. ** Changed in: kernel-package (Ubuntu) Status: Fix Released => In Progress -- Kernel panic on startup https://launchpad.net/bugs/52416 From cptnapalm at hotmail.com Sat Jul 15 18:02:42 2006 From: cptnapalm at hotmail.com (cptnapalm) Date: Sat, 15 Jul 2006 18:02:42 -0000 Subject: [Bug 30570] Re: CPU usage very high with no running tasks using it References: <20060205163505.29619.50181.malonedeb@gangotri.ubuntu.com> Message-ID: <20060715180242.1979.98359.malone@gangotri.ubuntu.com> *** This bug is a duplicate of bug 30557 *** Toshiba Satellite M65-9092 is the same as above: Loads of CPU usage when idle, which goes away with the /etc/rc.local addition. -- CPU usage very high with no running tasks using it https://launchpad.net/bugs/30570 From freddie at witherden.org Sat Jul 15 18:39:51 2006 From: freddie at witherden.org (EvilGuru) Date: Sat, 15 Jul 2006 18:39:51 -0000 Subject: [Bug 53078] Linux Kernel 2.6.15-26-386 gives an 'crc' error at boot-up References: <20060715183355.1931.17897.malonedeb@gangotri.ubuntu.com> Message-ID: <20060715183951.1979.20362.launchpad@canonical@gangotri.ubuntu.com> Public bug reported: The other day I upgraded my kernel on my Ubuntu 6.06 Dapper Drake PC (x86, Athlon Tbird 1.4Ghz, 512Mb RAM, nVidia GeForce 3) to 2.6.15-26-386 along with the modules (both restricted and non-restricted). When I rebooted I found that I got a: crc error -- System Halt Error message on boot-up when it tried to load the kernel. The same thing happened with the kernel in recovery mode. When I selected the 2.6.15-25-386 kernel from the grub boot-up list I found that everything worked fine again. I have tried both re-installing the packages (restricted modules, kernel, modules) with the '386' versions with no success and have been forced to switch back to 2.6.15-25 kernel image. I do not have any custom compiled kernel modules, with the only one I know of being the nvidia proprietary driver, whose kernel module should have been upgraded when I upgraded the restricted kernel modules. That is all I know, regards, Freddie. ** Affects: linux-source-2.6.15 (Ubuntu) Importance: Untriaged Status: Unconfirmed -- Linux Kernel 2.6.15-26-386 gives an 'crc' error at boot-up https://launchpad.net/bugs/53078 From freddie at witherden.org Sat Jul 15 18:33:55 2006 From: freddie at witherden.org (EvilGuru) Date: Sat, 15 Jul 2006 18:33:55 -0000 Subject: [Bug 53078] Linux Kernel 2.6.15-26-386 gives an 'crc' error at boot-up References: <20060715183355.1931.17897.malonedeb@gangotri.ubuntu.com> Message-ID: <20060715183355.1931.17897.malonedeb@gangotri.ubuntu.com> Public bug reported: The other day I upgraded my kernel on my Ubuntu 6.06 Dapper Drake PC (x86, Athlon Tbird 1.4Ghz, 512Mb RAM, nVidia GeForce 3) to 2.6.15-26-386 along with the modules (both restricted and non-restricted). When I rebooted I found that I got a: crc error -- System Halt Error message on boot-up when it tried to load the kernel. The same thing happened with the kernel in recovery mode. When I selected the 2.6.15-25-386 kernel from the grub boot-up list I found that everything worked fine again. I have tried both re-installing the packages (restricted modules, kernel, modules) with the '386' versions with no success and have been forced to switch back to 2.6.15-25 kernel image. I do not have any custom compiled kernel modules, with the only one I know of being the nvidia proprietary driver, whose kernel module should have been upgraded when I upgraded the restricted kernel modules. That is all I know, regards, Freddie. ** Affects: linux-source-2.6.15 (Ubuntu) Importance: Untriaged Status: Unconfirmed -- Linux Kernel 2.6.15-26-386 gives an 'crc' error at boot-up https://launchpad.net/bugs/53078 From outpourav at yahoo.fr Sat Jul 15 18:39:50 2006 From: outpourav at yahoo.fr (=?utf-8?b?Z2l2csOp?=) Date: Sat, 15 Jul 2006 18:39:50 -0000 Subject: [Bug 53078] Re: Linux Kernel 2.6.15-26-386 gives an 'crc' error at boot-up References: <20060715183355.1931.17897.malonedeb@gangotri.ubuntu.com> Message-ID: <20060715183950.1979.4050.launchpad@gangotri.ubuntu.com> ** Changed in: Ubuntu Sourcepackagename: None => linux-source-2.6.15 -- Linux Kernel 2.6.15-26-386 gives an 'crc' error at boot-up https://launchpad.net/bugs/53078 From ben.collins at ubuntu.com Sat Jul 15 19:34:41 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Sat, 15 Jul 2006 19:34:41 -0000 Subject: [Bug 53078] Re: [Bug 53078] Re: Linux Kernel 2.6.15-26-386 gives an 'crc' error at boot-up References: <20060715183355.1931.17897.malonedeb@gangotri.ubuntu.com> <20060715183950.1979.4050.launchpad@gangotri.ubuntu.com> Message-ID: <1152992081.4394.34.camel@grayson> Please attach a screenshot of the error when it occurs (digital photo if possible), or write out the last 4-5 lines so you can add them to this bug report. I'd like to see what's occurring just before this happens. -- Linux Kernel 2.6.15-26-386 gives an 'crc' error at boot-up https://launchpad.net/bugs/53078 From ubuntu at paul.sladen.org Sat Jul 15 20:25:01 2006 From: ubuntu at paul.sladen.org (Paul Sladen) Date: Sat, 15 Jul 2006 20:25:01 -0000 Subject: [Bug 53093] sleep.sh never completes, waiting on 'pccardctl eject' because of kernel IDE oops References: <20060715200634.2082.46657.malonedeb@gandwana.ubuntu.com> Message-ID: <20060715202501.1931.24305.launchpad@canonical@gangotri.ubuntu.com> Public bug reported: 22357 \_ /bin/sh /usr/share/hal/scripts/hal-system-power-suspend 22358 \_ /bin/bash /usr/sbin/pmi action suspend force 22367 \_ /bin/bash /etc/acpi/sleep.sh force 22379 \_ pccardctl eject the pcardctl is un-strace-able (nothing is happening) and gdb cannot attach: $ sudo gdb (gdb) attach 22379 Attaching to process 22379 ptrace: Operation not permitted. in this case, a PCMCIA SD (IDE) card reader was inserted. In this case, the top of the oops is: Call Trace: [sysfs_create_dir+40/112] sysfs_create_dir+0x28/0x70 [create_dir+18/80] create_dir+0x12/0x50 [kobject_add+113/224] kobject_add+0x71/0xe0 [kobject_register+22/96] kobject_register+0x16/0x60 [add_partition+172/208] add_partition+0xac/0xd0 [rescan_partitions+232/320] rescan_partitions+0xe8/0x140 and the full (stripped) backtrace, oops and subsequent related messages will be attached. ** Affects: linux-source-2.6.15 (Ubuntu) Importance: Untriaged Status: Unconfirmed -- sleep.sh never completes, waiting on 'pccardctl eject' because of kernel IDE oops https://launchpad.net/bugs/53093 From freddie at witherden.org Sat Jul 15 20:19:23 2006 From: freddie at witherden.org (EvilGuru) Date: Sat, 15 Jul 2006 20:19:23 -0000 Subject: [Bug 53078] Re: Linux Kernel 2.6.15-26-386 gives an 'crc' error at boot-up References: <20060715183355.1931.17897.malonedeb@gangotri.ubuntu.com> Message-ID: <20060715201923.1931.15992.malone@gangotri.ubuntu.com> I did have a go at taking a screen shot using my camera, but did not have a lot of luck (with the flash you can not see a thing, with no flash it is very blurry), anyway here is a transcript of what I saw to the best of my ability: savedefault boot Uncompressing Linux... crc error -- System halted The booting process up until the crc error bit is no different from what I usually get. Hope this helps. -- Linux Kernel 2.6.15-26-386 gives an 'crc' error at boot-up https://launchpad.net/bugs/53078 From mjg59 at codon.org.uk Sat Jul 15 20:25:01 2006 From: mjg59 at codon.org.uk (Matthew Garrett) Date: Sat, 15 Jul 2006 20:25:01 -0000 Subject: [Bug 53093] Re: sleep.sh never completes, waiting on 'pccardctl eject' because of kernel IDE oops References: <20060715200634.2082.46657.malonedeb@gandwana.ubuntu.com> Message-ID: <20060715202501.1931.85241.malone@gangotri.ubuntu.com> Presumably the same happens regardless of it being called from sleep.sh? It's presumably ide-cs being crap, which is fairly traditional. ** Changed in: acpi-support (Ubuntu) Sourcepackagename: acpi-support => linux-source-2.6.15 -- sleep.sh never completes, waiting on 'pccardctl eject' because of kernel IDE oops https://launchpad.net/bugs/53093 From mdz at ubuntu.com Sat Jul 15 20:29:37 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Sat, 15 Jul 2006 20:29:37 -0000 Subject: [Bug 21412] Re: Default update-grub behaviour is not intuitive with respect to user modifications References: <20060113141241.21012.46008.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060715202937.1979.50040.launchpad@gangotri.ubuntu.com> ** Summary changed: - Default update-grub behaviour is not intuitive + Default update-grub behaviour is not intuitive with respect to user modifications -- Default update-grub behaviour is not intuitive with respect to user modifications https://launchpad.net/bugs/21412 From mdz at ubuntu.com Sat Jul 15 21:06:48 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Sat, 15 Jul 2006 21:06:48 -0000 Subject: [Bug 30570] Re: CPU usage very high with no running tasks using it References: <20060205163505.29619.50181.malonedeb@gangotri.ubuntu.com> Message-ID: <20060715210648.1931.33467.malone@gangotri.ubuntu.com> *** This bug is a duplicate of bug 30557 *** Rejecting linux-meta tasks; this bug has nothing to do with the metapackages and is already filed underlinux-source-2.6.15 ** Changed in: linux-meta (Ubuntu) Status: Unconfirmed => Rejected -- CPU usage very high with no running tasks using it https://launchpad.net/bugs/30570 From mdz at ubuntu.com Sat Jul 15 21:06:55 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Sat, 15 Jul 2006 21:06:55 -0000 Subject: [Bug 30570] Re: CPU usage very high with no running tasks using it References: <20060205163505.29619.50181.malonedeb@gangotri.ubuntu.com> Message-ID: <20060715210656.1979.75507.malone@gangotri.ubuntu.com> *** This bug is a duplicate of bug 30557 *** Rejecting linux-meta tasks; this bug has nothing to do with the metapackages and is already filed underlinux-source-2.6.15 ** Changed in: linux-meta (Ubuntu Dapper) Status: Confirmed => Rejected -- CPU usage very high with no running tasks using it https://launchpad.net/bugs/30570 From ubuntu at paul.sladen.org Sat Jul 15 22:47:07 2006 From: ubuntu at paul.sladen.org (Paul Sladen) Date: Sat, 15 Jul 2006 22:47:07 -0000 Subject: [Bug 53093] Re: sleep.sh never completes, waiting on 'pccardctl eject' because of kernel IDE oops References: <20060715200634.2082.46657.malonedeb@gandwana.ubuntu.com> Message-ID: <20060715224707.2082.85339.malone@gandwana.ubuntu.com> -- sleep.sh never completes, waiting on 'pccardctl eject' because of kernel IDE oops https://launchpad.net/bugs/53093 From hn093 at netscape.net Sun Jul 16 00:42:17 2006 From: hn093 at netscape.net (hn093) Date: Sun, 16 Jul 2006 00:42:17 -0000 Subject: [Bug 36998] Re: Flight 5 Kernel Won't Boot on an IBM Thinkpad R30 References: <20060328130330.20514.53400.malonedeb@gangotri.ubuntu.com> Message-ID: <20060716004217.2126.73783.malone@gandwana.ubuntu.com> So this bug has been marked "Needs info" for several months now. What info is needed, exactly? -- Flight 5 Kernel Won't Boot on an IBM Thinkpad R30 https://launchpad.net/bugs/36998 From msemtd at yahoo.co.uk Sun Jul 16 09:07:31 2006 From: msemtd at yahoo.co.uk (Michael Erskine) Date: Sun, 16 Jul 2006 09:07:31 -0000 Subject: [Bug 52937] Re: "Waiting for root file system..." ...not found after kernel upgrade References: <20060714084001.13020.17138.malonedeb@gandwana.ubuntu.com> Message-ID: <20060716090731.1931.88809.malone@gangotri.ubuntu.com> If only I had known that there was a simple fix! Over the five days and nights that the machine was down, I followed a lot of advice from a lot of people offering their well-intended and, of course, completely free support. Many thanks to all who helped or left hints in blogs, forums, newsgroups, etc. -- "Waiting for root file system..." ...not found after kernel upgrade https://launchpad.net/bugs/52937 From harold at alum.mit.edu Sun Jul 16 12:23:57 2006 From: harold at alum.mit.edu (hnaparst) Date: Sun, 16 Jul 2006 12:23:57 -0000 Subject: [Bug 50313] Re: mounting root filesystem stuck References: <20060619100018.13137.57015.malonedeb@gandwana.ubuntu.com> Message-ID: <20060716122357.1979.39562.malone@gangotri.ubuntu.com> Well, it isn't an option in my BIOS. But booting using the 386 kernel works. It is only the 686, versions higher than 2.6.15-23 that hang when trying to mount the root file system. The error message is regarding udevplug. There are only a few diffs in the config files between version 23 and 26, so it shouldn't be too hard to nail down. -- mounting root filesystem stuck https://launchpad.net/bugs/50313 From golfbuf at gmail.com Sun Jul 16 12:41:32 2006 From: golfbuf at gmail.com (golfbuf) Date: Sun, 16 Jul 2006 12:41:32 -0000 Subject: [Bug 50323] Re: system freezes after last kernel update References: <20060619110659.20041.85554.malonedeb@gangotri.ubuntu.com> Message-ID: <20060716124132.2126.95729.malone@gandwana.ubuntu.com> Have verified that this system freeze occurs with newest update to this kernel, linux-image-2.6.15-26-686. -- system freezes after last kernel update https://launchpad.net/bugs/50323 From norba at web.de Sun Jul 16 13:06:25 2006 From: norba at web.de (norba) Date: Sun, 16 Jul 2006 13:06:25 -0000 Subject: [Bug 32597] Re: Hang while booting References: <20060223120455.14968.80193.malonedeb@gangotri.ubuntu.com> Message-ID: <20060716130625.1979.18367.malone@gangotri.ubuntu.com> I have also the same problem. The Boot stops 9 of 10 times at "loading hardware drivers". After a few minutes the booting continues. After that all works fine expect of my internet-connection (realtek networkcard with dslmodem). pppoeconfig says it can't find the "access concentrator" of my provider. I have to reboot until the "loading hardware drivers" bug don't appear. Then everything works fine. -- Hang while booting https://launchpad.net/bugs/32597 From ubuntu at treblig.org Sun Jul 16 13:22:59 2006 From: ubuntu at treblig.org (Dave Gilbert) Date: Sun, 16 Jul 2006 13:22:59 -0000 Subject: [Bug 43374] Re: [dapper] Xorg is asking for a newer Radeon module References: <20060507144610.20638.44271.malonedeb@gangotri.ubuntu.com> Message-ID: <20060716132259.2126.15524.malone@gandwana.ubuntu.com> Please close this bug - this has got fixed in one of the kernel updates that have happened in the last couple of months -- [dapper] Xorg is asking for a newer Radeon module https://launchpad.net/bugs/43374 From ant.amarilli at free.fr Sun Jul 16 13:36:36 2006 From: ant.amarilli at free.fr (Antoine Amarilli) Date: Sun, 16 Jul 2006 13:36:36 -0000 Subject: [Bug 39315] Re: Keyboard random repeat References: <20060412160910.15436.50293.malonedeb@gangotri.ubuntu.com> Message-ID: <20060716133636.2126.80893.malone@gandwana.ubuntu.com> Hello, I'm still running Dapper on a Travelmate 4000, and I confirm that, even with the latest updates, I am still encountering the problem. Any other ideas ? Thanks in advance. -- Keyboard random repeat https://launchpad.net/bugs/39315 From ev00rg at excite.com Sun Jul 16 13:53:19 2006 From: ev00rg at excite.com (gr00ve) Date: Sun, 16 Jul 2006 13:53:19 -0000 Subject: [Bug 46233] Re: SoundBlaster Audigy SE - sound output only in 2 front channels References: <20060523224439.31072.55836.malonedeb@gangotri.ubuntu.com> Message-ID: <20060716135319.1979.39639.malone@gangotri.ubuntu.com> funny enough, as already mentioned all together the channels do not play except the front left/rights. However in xmms for instance if configured under > options > preferences > output plugin > ALSA 1.2.10 > configure > audio device setting - should you choose hw:0,0 hw:0,1 hw:0,2 it does play through other channels!!! So in theory it works :) wuld be great to get it to work all together now! -- SoundBlaster Audigy SE - sound output only in 2 front channels https://launchpad.net/bugs/46233 From pbell at dpb.org.uk Sun Jul 16 13:53:25 2006 From: pbell at dpb.org.uk (Paul Bell) Date: Sun, 16 Jul 2006 13:53:25 -0000 Subject: [Bug 6627] Re: lexmark z53 blank pages References: <20060110202826.5372.9972.malonedeb@gangotri.ubuntu.com> Message-ID: <20060716135325.2082.46150.malone@gandwana.ubuntu.com> Hi... I've tried all suggested above and I'm still spewing blank sheets. I'm actually using a Xerox XK50cx Workcentre (via USB) which works better on Windows with the Lexmark Z53 driver! I've now "downgraded" using libgimpprint1_4.2.7-10_amd64.deb cupsys-driver-gimpprint_4.2.7-10_amd64.deb cupsys-driver-gimpprint-data_4.2.7-10_all.deb Printing is now fine (Lexmark Z53). I've spent a *lot* of time reading forums and searching for an answer to this so unless someone has another suggestion I'm going to lock cupsys-driver-gimpprint in Synaptic. 'apt-cache showsrc cupsys gutenprint | grep ^Version' was (and still is) showing Version: 1.2.0-0ubuntu5 Version: 1.2.1-0ubuntu2 Version: 5.0.0~rc2-0ubuntu6 Ubuntu 6.06 / 2.6.15-26-amd64-k8 Cheers ... Paul -- lexmark z53 blank pages https://launchpad.net/bugs/6627 From marc.franquesa at gmail.com Sun Jul 16 14:47:03 2006 From: marc.franquesa at gmail.com (Marc F) Date: Sun, 16 Jul 2006 14:47:03 -0000 Subject: [Bug 38278] Re: wifi card don't work. isl3886 is required but not installed References: <20060405203926.24486.7083.malonedeb@gangotri.ubuntu.com> Message-ID: <20060716144703.1979.88869.malone@gangotri.ubuntu.com> The sysfs new_id hack also works perfecly for me on a 3CRWE154G72 PCMCIA card. ¿Is there any way to make this change persistent between reboots without recompiling the kernel?. The prism54 needs to be loaded before setting the pci-id to the sysfs node. -- wifi card don't work. isl3886 is required but not installed https://launchpad.net/bugs/38278 From eaton.lists at gmail.com Sun Jul 16 14:54:21 2006 From: eaton.lists at gmail.com (Brian Eaton) Date: Sun, 16 Jul 2006 14:54:21 -0000 Subject: [Bug 30557] Re: cpu idle time in /proc/stat wrong References: <20060205141542.11709.55517.malonedeb@gandwana.ubuntu.com> Message-ID: <20060716145421.2082.55750.malone@gandwana.ubuntu.com> Both problems are reproducible in kernel.org 2.6.15.7. Both appear to be fixed in 2.6.16. -- cpu idle time in /proc/stat wrong https://launchpad.net/bugs/30557 From chrizel at gmail.com Sun Jul 16 15:12:46 2006 From: chrizel at gmail.com (Christian Zeller) Date: Sun, 16 Jul 2006 15:12:46 -0000 Subject: [Bug 44959] Re: sdhci driver kills Suspend/Resume on Dell X1 References: <20060516054511.15848.15714.malonedeb@gangotri.ubuntu.com> Message-ID: <20060716151246.1979.60646.malone@gangotri.ubuntu.com> One simple solution to fix the problem with the long timeout after resume would be to prevent the mentioned modules from getting loaded by the kernel. I added the following two lines to my /etc/modprobe.d/blacklist: blacklist sdhci blacklist mmc_core The downside is that the SD card slot certainly wouldn't run anymore, but that's no problem for me personally because I don't use it. -- sdhci driver kills Suspend/Resume on Dell X1 https://launchpad.net/bugs/44959 From utnubu at sievertsen.de Sun Jul 16 16:44:16 2006 From: utnubu at sievertsen.de (fx5) Date: Sun, 16 Jul 2006 16:44:16 -0000 Subject: [Bug 47561] Re: ACPI-battery monitoring stops working after some time References: <20060530194416.5009.28356.malonedeb@gandwana.ubuntu.com> Message-ID: <20060716164416.2082.7691.malone@gandwana.ubuntu.com> The patch from here (http://bugzilla.kernel.org/attachment.cgi?id=8356&action=view) fixes the bug. I attached a patch which works for me with ubuntu-dapper kernel-source. -- ACPI-battery monitoring stops working after some time https://launchpad.net/bugs/47561 From ben.collins at ubuntu.com Sun Jul 16 17:37:51 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Sun, 16 Jul 2006 17:37:51 -0000 Subject: [Bug 53078] Re: [Bug 53078] Re: Linux Kernel 2.6.15-26-386 gives an 'crc' error at boot-up References: <20060715183355.1931.17897.malonedeb@gangotri.ubuntu.com> <20060715201923.1931.15992.malone@gangotri.ubuntu.com> Message-ID: <1153071471.16004.52.camel@grayson> On Sat, 2006-07-15 at 20:19 +0000, EvilGuru wrote: > I did have a go at taking a screen shot using my camera, but did not > have a lot of luck (with the flash you can not see a thing, with no > flash it is very blurry), anyway here is a transcript of what I saw to > the best of my ability: > > savedefault > boot > Uncompressing Linux... > > crc error Please remove the 'quiet splash' options from the kernel command line (you can do this from grub) so it shows more of the output from the kernel. Thanks. -- Linux Kernel 2.6.15-26-386 gives an 'crc' error at boot-up https://launchpad.net/bugs/53078 From ben.collins at ubuntu.com Sun Jul 16 17:44:33 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Sun, 16 Jul 2006 17:44:33 -0000 Subject: [Bug 36998] Re: Flight 5 Kernel Won't Boot on an IBM Thinkpad R30 References: <20060328130330.20514.53400.malonedeb@gangotri.ubuntu.com> Message-ID: <20060716174433.1931.30469.launchpad@gangotri.ubuntu.com> ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Needs Info => Confirmed -- Flight 5 Kernel Won't Boot on an IBM Thinkpad R30 https://launchpad.net/bugs/36998 From mail at carthik.net Sun Jul 16 19:11:19 2006 From: mail at carthik.net (Carthik Sharma) Date: Sun, 16 Jul 2006 19:11:19 -0000 Subject: [Bug 23941] Re: Resuming from Suspend-To-Disk after doing a Susp-To-Ram turns kacpid to 99% References: <20060113142634.21012.79546.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060716191119.1979.61577.malone@gangotri.ubuntu.com> This report lacks information required to debug and fix it. We are closing this bug now since there has been no response for a long period of time. If the issue persists with the latest packages, please reopen the bug providing any debug information. Thank you. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Confirmed => Rejected -- Resuming from Suspend-To-Disk after doing a Susp-To-Ram turns kacpid to 99% https://launchpad.net/bugs/23941 From mail at carthik.net Sun Jul 16 19:13:01 2006 From: mail at carthik.net (Carthik Sharma) Date: Sun, 16 Jul 2006 19:13:01 -0000 Subject: [Bug 16163] Re: Missing power events on nondescript Sony laptop? References: <20060113134505.21012.24613.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060716191301.1931.11993.malone@gangotri.ubuntu.com> This report lacks information required to debug and fix it. We are closing this bug now since there has been no response for a long period of time. If the issue persists with the latest packages, please reopen the bug providing any debug information. Thank you. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Needs Info => Rejected -- Missing power events on nondescript Sony laptop? https://launchpad.net/bugs/16163 From airiwi9 at mindspring.com Sun Jul 16 20:26:39 2006 From: airiwi9 at mindspring.com (Al Williams) Date: Sun, 16 Jul 2006 20:26:39 -0000 Subject: [Bug 28998] Re: Ubuntu goes to kernel panic when I try to install from cd References: <20060119150104.28395.50630.malonedeb@gangotri.ubuntu.com> Message-ID: <20060716202639.2082.45107.malone@gandwana.ubuntu.com> Installing Ubuntu 5.0 system stalled with blank screen. Rebooting and attempting to continue installation stops and reads: [42944668.265000] (0) Kernal panic-not syncing: attempt to kill init. Next line is: [42944668.265000] blank with a blinking curser, keyboard ineffective System is an empty 40 Gig HD, tried formatted and unformatted, AMD Anthalon CPU with 750+ MB ram. -- Ubuntu goes to kernel panic when I use dhclient https://launchpad.net/bugs/28998 From mail at carthik.net Sun Jul 16 21:18:40 2006 From: mail at carthik.net (Carthik Sharma) Date: Sun, 16 Jul 2006 21:18:40 -0000 Subject: [Bug 26073] Re: Installation freeze on VIA KT400(A)/600 AMD Duron 1.6GHz - Ubuntu 5.10 References: <20060113144745.21012.68745.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060716211840.2126.97067.malone@gandwana.ubuntu.com> We are closing this bug due to a lack of feedback for an extended period of time. If the problem persists with the latest packages, please reopen this bug, providing any available debug information. The original reporter cannot provide more information since he doesn't have the hardware anymore and no one else seems to have the problem, or respond. Thank you. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Needs Info => Rejected -- Installation freeze on VIA KT400(A)/600 AMD Duron 1.6GHz - Ubuntu 5.10 https://launchpad.net/bugs/26073 From gregjhall at optusnet.com.au Mon Jul 17 02:48:57 2006 From: gregjhall at optusnet.com.au (greghall) Date: Mon, 17 Jul 2006 02:48:57 -0000 Subject: [Bug 43961] Re: Power down after shutdown does not work... References: <20060510072310.21520.62027.malonedeb@gandwana.ubuntu.com> Message-ID: <20060717024857.1931.8537.malone@gangotri.ubuntu.com> UPDATE Swapped from the 2.6.15-26-386 version of the kernel to 2.6.15-26-k7 (to match my Athlon processor) and my PC now shuts down as expected with no change to the kernel boot options. -- Power down after shutdown does not work... https://launchpad.net/bugs/43961 From luke.hoersten at gmail.com Mon Jul 17 03:12:14 2006 From: luke.hoersten at gmail.com (Luke Hoersten) Date: Mon, 17 Jul 2006 03:12:14 -0000 Subject: [Bug 52553] Re: Kernel panic - not syncing: IO-APIC + timer doesn't work! References: <20060710155757.27312.91477.malonedeb@gangotri.ubuntu.com> Message-ID: <20060717031214.2126.17611.malone@gandwana.ubuntu.com> Sorry about posting the irrelevant information. I booted with the "noapic" and it fixed the kernel panic but, like Karl stated, made the mouse very sluggish. Almost unusable. I tried using the "apic=debug" boot argument but that did not seem to do anything. I can also confirm that the kernel panic still occurs with linux- image-2.6.15-26-686. Ben, do you have any other suggestions for debug information? -- Kernel panic - not syncing: IO-APIC + timer doesn't work! https://launchpad.net/bugs/52553 From swingincelt at gmail.com Mon Jul 17 03:30:05 2006 From: swingincelt at gmail.com (Robert Crosbie) Date: Mon, 17 Jul 2006 03:30:05 -0000 Subject: [Bug 53189] Re: kernel 2.6.15-26 breaks video4linux apps References: <20060716232042.2126.47523.malonedeb@gandwana.ubuntu.com> Message-ID: <20060717033005.1979.28825.malone@gangotri.ubuntu.com> It seems this is only a problem with 2.6.15-26-k7 since I tried the 2.6.15-26-386 kernel and the video4linux applications work with that. I do have an AMD processor (Athlon 2700XP) -- kernel 2.6.15-26 breaks video4linux apps https://launchpad.net/bugs/53189 From adpenaranda at gmail.com Mon Jul 17 04:43:17 2006 From: adpenaranda at gmail.com (=?utf-8?q?Aldous_D=2E_Pe=C3=B1aranda?=) Date: Mon, 17 Jul 2006 04:43:17 -0000 Subject: [Bug 48087] Re: RT61 driver hangs net, if interface accessed while down References: <20060602175004.5009.98804.malonedeb@gandwana.ubuntu.com> Message-ID: <20060717044317.2126.30034.malone@gandwana.ubuntu.com> Hi, We've just experienced this on the laptop where Dapper worked out of the box (initially). My girlfriend wanted to try connecting via dial-up and enabled her modem. When she rebooted, the laptop won't boot properly anymore. Gdm will still show up but when you log in, it will hang at some point when Gnome is starting. Here's the dmesg log. -- RT61 driver hangs net, if interface accessed while down https://launchpad.net/bugs/48087 From crimsun at fungus.sh.nu Mon Jul 17 04:41:15 2006 From: crimsun at fungus.sh.nu (Daniel T Chen) Date: Mon, 17 Jul 2006 04:41:15 -0000 Subject: [Bug 42572] Re: e1000 driver on thinkpad X60 doesn't auto-load, produces latency References: <20060502130316.30638.54331.malonedeb@gangotri.ubuntu.com> Message-ID: <20060717044115.1979.75581.launchpad@gangotri.ubuntu.com> ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Unconfirmed => Confirmed -- e1000 driver on thinkpad X60 doesn't auto-load, produces latency https://launchpad.net/bugs/42572 From fabbione at ubuntu.com Mon Jul 17 05:05:55 2006 From: fabbione at ubuntu.com (Fabio Massimo Di Nitto) Date: Mon, 17 Jul 2006 05:05:55 -0000 Subject: [Bug 53208] [EGDY] Regression from 2.6.17-2 to 2.6.17-5 References: <20060717050555.2126.12285.malonedeb@gandwana.ubuntu.com> Message-ID: <20060717050555.2126.12285.malonedeb@gandwana.ubuntu.com> Public bug reported: Hey Ben, i think the PATA change isn't ready to be there yet. All my machines can't find root and no automatic transition has been done for it. Fabio ** Affects: linux-source-2.6.17 (Ubuntu) Importance: Critical Status: Confirmed ** Changed in: linux-source-2.6.17 (Ubuntu) Importance: Untriaged => Critical Status: Unconfirmed => Confirmed -- [EGDY] Regression from 2.6.17-2 to 2.6.17-5 https://launchpad.net/bugs/53208 From msk.spam at seznam.cz Mon Jul 17 07:12:09 2006 From: msk.spam at seznam.cz (Dusan Zatkovsky) Date: Mon, 17 Jul 2006 07:12:09 -0000 Subject: [Bug 38897] Re: Missing keyboard References: <20060409155106.24516.37151.malonedeb@gangotri.ubuntu.com> Message-ID: <20060717071209.1931.43505.malone@gangotri.ubuntu.com> I have the same problem with the 2.6.15-26.44 ( linux- image-2.6.15-26-686 ). I have usb mice and ps2 keyboard. After booting this kernel, mouse work, but keyboard not. This bug seems to be similar to 49047. -- Missing keyboard https://launchpad.net/bugs/38897 From jerome.lacoste at gmail.com Mon Jul 17 08:19:40 2006 From: jerome.lacoste at gmail.com (Jerome Lacoste) Date: Mon, 17 Jul 2006 08:19:40 -0000 Subject: [Bug 53216] BUG() report in getnstimeofday: soft lockup References: <20060717081940.2082.7456.malonedeb@gandwana.ubuntu.com> Message-ID: <20060717081940.2082.7456.malonedeb@gandwana.ubuntu.com> Public bug reported: Here are 3 identical BUG() reports in reverse chronological order. I also have had a hang at some point. I didn't have any hangs on that machine in 2 years. Not sure if it related to the install of Dapper (was running Debian unstable before) or the upgrade of the BIOS. Jul 17 08:58:22 dolcevita kernel: [17500393.072000] BUG: soft lockup detected on CPU#0! Jul 17 08:58:22 dolcevita kernel: [17500393.072000] Jul 17 08:58:22 dolcevita kernel: [17500393.072000] Pid: 10242, comm: skype Jul 17 08:58:22 dolcevita kernel: [17500393.072000] EIP: 0060:[get_offset_pmtmr+17/1280] CPU: 0 Jul 17 08:58:23 dolcevita kernel: [17500393.072000] EIP is at get_offset_pmtmr+0x11/0x500 Jul 17 08:58:23 dolcevita kernel: [17500393.072000] EFLAGS: 00000292 Not tainted (2.6.15-26-386) Jul 17 08:58:23 dolcevita kernel: [17500393.072000] EAX: 001b0c56 EBX: 098fade8 ECX: 00000000 EDX: 00000808 Jul 17 08:58:23 dolcevita kernel: [17500393.072000] ESI: 001ad470 EDI: 098fade8 EBP: e9ff5f98 DS: 007b ES: 007b Jul 17 08:58:23 dolcevita kernel: [17500393.072000] CR0: 8005003b CR2: b50f8894 CR3: 02dc2000 CR4: 00000690 Jul 17 08:58:23 dolcevita kernel: [17500393.072000] [do_gettimeofday+26/208] do_gettimeofday+0x1a/0xd0 Jul 17 08:58:23 dolcevita kernel: [17500393.072000] [getnstimeofday+16/48] getnstimeofday+0x10/0x30 Jul 17 08:58:23 dolcevita kernel: [17500393.072000] [sys_clock_gettime+61/160] sys_clock_gettime+0x3d/0xa0 Jul 17 08:58:23 dolcevita kernel: [17500393.072000] [sys_clock_gettime+40/160] sys_clock_gettime+0x28/0xa0 Jul 17 08:58:23 dolcevita kernel: [17500393.072000] [sysenter_past_esp+84/121] sysenter_past_esp+0x54/0x79 Jul 17 08:58:23 dolcevita kernel: [17500416.284000] BUG: soft lockup detected on CPU#0! Jul 17 08:58:23 dolcevita kernel: [17500416.284000] Jul 17 08:58:23 dolcevita kernel: [17500416.284000] Pid: 10244, comm: skype Jul 17 08:58:23 dolcevita kernel: [17500416.284000] EIP: 0060:[get_offset_pmtmr+23/1280] CPU: 0 Jul 17 08:58:23 dolcevita kernel: [17500416.284000] EIP is at get_offset_pmtmr+0x17/0x500 Jul 17 08:58:23 dolcevita kernel: [17500416.284000] EFLAGS: 00000292 Not tainted (2.6.15-26-386) Jul 17 08:58:23 dolcevita kernel: [17500416.284000] EAX: 000ef2fe EBX: 000ef2fb ECX: 00000000 EDX: 00000808 Jul 17 08:58:23 dolcevita kernel: [17500416.284000] ESI: 000ebb15 EDI: 000ef2f8 EBP: f085df98 DS: 007b ES: 007b Jul 17 08:58:23 dolcevita kernel: [17500416.284000] CR0: 8005003b CR2: af4dc000 CR3: 02dc2000 CR4: 00000690 Jul 17 08:58:23 dolcevita kernel: [17500416.284000] [do_gettimeofday+26/208] do_gettimeofday+0x1a/0xd0 Jul 17 08:58:23 dolcevita kernel: [17500416.284000] [getnstimeofday+16/48] getnstimeofday+0x10/0x30 Jul 17 08:58:23 dolcevita kernel: [17500416.284000] [sys_clock_gettime+61/160] sys_clock_gettime+0x3d/0xa0 Jul 17 08:58:23 dolcevita kernel: [17500416.284000] [sys_clock_gettime+40/160] sys_clock_gettime+0x28/0xa0 Jul 17 08:58:23 dolcevita kernel: [17500416.284000] [sysenter_past_esp+84/121] sysenter_past_esp+0x54/0x79 Jul 17 00:40:08 dolcevita kernel: [17470247.308000] BUG: soft lockup detected on CPU#0! Jul 17 00:40:08 dolcevita kernel: [17470247.308000] Jul 17 00:40:08 dolcevita kernel: [17470247.308000] Pid: 30112, comm: skype Jul 17 00:40:08 dolcevita kernel: [17470247.308000] EIP: 0060:[sysenter_past_esp+28/121] CPU: 0 Jul 17 00:40:08 dolcevita kernel: [17470247.308000] EIP is at sysenter_past_esp+0x1c/0x79 Jul 17 00:40:08 dolcevita kernel: [17470247.308000] EFLAGS: 00000297 Not tainted (2.6.15-26-386) Jul 17 00:40:08 dolcevita kernel: [17470247.308000] EAX: 00000109 EBX: 00000000 ECX: b4979398 EDX: 08e286ec Jul 17 00:40:08 dolcevita kernel: [17470247.308000] ESI: 08e2871c EDI: 0027e1b5 EBP: b49793f0 DS: 007b ES: 007b Jul 17 00:40:08 dolcevita kernel: [17470247.308000] CR0: 8005003b CR2: b58f9894 CR3: 02dc2000 CR4: 00000690 Jul 17 00:40:08 dolcevita kernel: [17470396.360000] BUG: soft lockup detected on CPU#0! Jul 17 00:40:08 dolcevita kernel: [17470396.360000] Jul 17 00:40:08 dolcevita kernel: [17470396.360000] Pid: 30114, comm: skype Jul 17 00:40:08 dolcevita kernel: [17470396.360000] EIP: 0060:[get_offset_pmtmr+20/1280] CPU: 0 Jul 17 00:40:08 dolcevita kernel: [17470396.360000] EIP is at get_offset_pmtmr+0x14/0x500 Jul 17 00:40:08 dolcevita kernel: [17470396.360000] EFLAGS: 00000292 Not tainted (2.6.15-26-386) Jul 17 00:40:08 dolcevita kernel: [17470396.360000] EAX: 00b724a3 EBX: 08aad294 ECX: 00000000 EDX: 00000808 Jul 17 00:40:08 dolcevita kernel: [17470396.360000] ESI: 00b6ecbc EDI: 00b724a0 EBP: c04b9f98 DS: 007b ES: 007b Jul 17 00:40:08 dolcevita kernel: [17470396.360000] CR0: 8005003b CR2: b7fc1000 CR3: 02dc2000 CR4: 00000690 Jul 17 00:40:08 dolcevita kernel: [17470396.360000] [do_gettimeofday+26/208] do_gettimeofday+0x1a/0xd0 Jul 17 00:40:08 dolcevita kernel: [17470396.360000] [getnstimeofday+16/48] getnstimeofday+0x10/0x30 Jul 17 00:40:08 dolcevita kernel: [17470396.360000] [sys_clock_gettime+61/160] sys_clock_gettime+0x3d/0xa0 Jul 17 00:40:08 dolcevita kernel: [17470396.360000] [sys_clock_gettime+40/160] sys_clock_gettime+0x28/0xa0 Jul 14 17:45:20 dolcevita kernel: [17272833.092000] BUG: soft lockup detected on CPU#0! Jul 14 17:45:20 dolcevita kernel: [17272833.092000] Jul 14 17:45:20 dolcevita kernel: [17272833.092000] Pid: 13402, comm: skype Jul 14 17:45:20 dolcevita kernel: [17272833.092000] EIP: 0060:[get_offset_pmtmr+17/1280] CPU: 0 Jul 14 17:45:20 dolcevita kernel: [17272833.092000] EIP is at get_offset_pmtmr+0x11/0x500 Jul 14 17:45:20 dolcevita kernel: [17272833.092000] EFLAGS: 00000292 Not tainted (2.6.15-26-386) Jul 14 17:45:20 dolcevita kernel: [17272833.092000] EAX: 00b1df92 EBX: 02c788d2 ECX: 00000000 EDX: 00000808 Jul 14 17:45:20 dolcevita kernel: [17272833.092000] ESI: 00b1a7ac EDI: 02c788d2 EBP: f1437f98 DS: 007b ES: 007b Jul 14 17:45:20 dolcevita kernel: [17272833.092000] CR0: 8005003b CR2: b40c2894 CR3: 02dc2000 CR4: 00000690 Jul 14 17:45:20 dolcevita kernel: [17272833.092000] [do_gettimeofday+26/208] do_gettimeofday+0x1a/0xd0 Jul 14 17:45:20 dolcevita kernel: [17272833.092000] [getnstimeofday+16/48] getnstimeofday+0x10/0x30 Jul 14 17:45:20 dolcevita kernel: [17272833.092000] [sys_clock_gettime+61/160] sys_clock_gettime+0x3d/0xa0 Jul 14 17:45:20 dolcevita kernel: [17272833.092000] [sys_clock_gettime+40/160] sys_clock_gettime+0x28/0xa0 Jul 14 17:45:20 dolcevita kernel: [17272833.092000] [sysenter_past_esp+84/121] sysenter_past_esp+0x54/0x79 Jul 14 17:45:20 dolcevita kernel: [17272851.956000] BUG: soft lockup detected on CPU#0! Jul 14 17:45:20 dolcevita kernel: [17272851.956000] Jul 14 17:45:20 dolcevita kernel: [17272851.956000] Pid: 13404, comm: skype Jul 14 17:45:20 dolcevita kernel: [17272851.956000] EIP: 0060:[get_offset_pmtmr+23/1280] CPU: 0 Jul 14 17:45:20 dolcevita kernel: [17272851.956000] EIP is at get_offset_pmtmr+0x17/0x500 Jul 14 17:45:20 dolcevita kernel: [17272851.956000] EFLAGS: 00000292 Not tainted (2.6.15-26-386) Jul 14 17:45:20 dolcevita kernel: [17272851.956000] EAX: 00b84667 EBX: 00b84664 ECX: 00000000 EDX: 00000808 Jul 14 17:45:20 dolcevita kernel: [17272851.956000] ESI: 00b80e7e EDI: 00b84661 EBP: f1f23f98 DS: 007b ES: 007b Jul 14 17:45:20 dolcevita kernel: [17272851.956000] CR0: 8005003b CR2: b7f91000 CR3: 02dc2000 CR4: 00000690 Jul 14 17:45:20 dolcevita kernel: [17272851.956000] [do_gettimeofday+26/208] do_gettimeofday+0x1a/0xd0 Jul 14 17:45:20 dolcevita kernel: [17272851.956000] [getnstimeofday+16/48] getnstimeofday+0x10/0x30 Jul 14 17:45:20 dolcevita kernel: [17272851.956000] [sys_clock_gettime+61/160] sys_clock_gettime+0x3d/0xa0 Jul 14 17:45:20 dolcevita kernel: [17272851.956000] [sys_clock_gettime+40/160] sys_clock_gettime+0x28/0xa0 Jul 14 17:45:20 dolcevita kernel: [17272851.956000] [sysenter_past_esp+84/121] sysenter_past_esp+0x54/0x79 ** Affects: linux-source-2.6.15 (Ubuntu) Importance: Untriaged Status: Unconfirmed -- BUG() report in getnstimeofday: soft lockup https://launchpad.net/bugs/53216 From freddie at witherden.org Mon Jul 17 08:33:36 2006 From: freddie at witherden.org (EvilGuru) Date: Mon, 17 Jul 2006 08:33:36 -0000 Subject: [Bug 53078] Re: Linux Kernel 2.6.15-26-386 gives an 'crc' error at boot-up References: <20060715183355.1931.17897.malonedeb@gangotri.ubuntu.com> Message-ID: <20060717083336.2082.17889.malone@gandwana.ubuntu.com> I have removed these two 'flags' from the kernel boot-up line in my grub config file and rebooted, however the result was exactly the same. -- Linux Kernel 2.6.15-26-386 gives an 'crc' error at boot-up https://launchpad.net/bugs/53078 From freddie at witherden.org Mon Jul 17 08:33:36 2006 From: freddie at witherden.org (EvilGuru) Date: Mon, 17 Jul 2006 08:33:36 -0000 Subject: [Bug 53078] Re: Linux Kernel 2.6.15-26-386 gives an 'crc' error at boot-up References: <20060715183355.1931.17897.malonedeb@gangotri.ubuntu.com> Message-ID: <20060717083336.2126.55616.malone@gandwana.ubuntu.com> I have removed these two 'flags' from the kernel boot-up line in my grub config file and rebooted, however the result was exactly the same. -- Linux Kernel 2.6.15-26-386 gives an 'crc' error at boot-up https://launchpad.net/bugs/53078 From cooperstephenjames at gmail.com Mon Jul 17 10:13:40 2006 From: cooperstephenjames at gmail.com (thetravellor) Date: Mon, 17 Jul 2006 10:13:40 -0000 Subject: [Bug 53221] Re: rt2570 driver fails to recognise ASUS WL167G References: <20060717091551.1979.63964.malonedeb@gangotri.ubuntu.com> Message-ID: <20060717101340.2126.21654.malone@gandwana.ubuntu.com> The stick is using the "STA_2500USB" drivers for OSX, its not based upon the RT71 chipset as far as I can tell. -- rt2570 driver fails to recognise ASUS WL167G https://launchpad.net/bugs/53221 From alex.ger at gmx.de Mon Jul 17 10:51:02 2006 From: alex.ger at gmx.de (AlexZ) Date: Mon, 17 Jul 2006 10:51:02 -0000 Subject: [Bug 43961] Re: Power down after shutdown does not work... References: <20060510072310.21520.62027.malonedeb@gandwana.ubuntu.com> Message-ID: <20060717105102.1979.65689.malone@gangotri.ubuntu.com> same on: AMD Sempron PC, WinFast (all integrated SIS) Board --> update to 2.6.15-26 doesn't help --> logfiles recreated -- Power down after shutdown does not work... https://launchpad.net/bugs/43961 From onkarshinde at rediffmail.com Mon Jul 17 12:45:31 2006 From: onkarshinde at rediffmail.com (Onkar Shinde) Date: Mon, 17 Jul 2006 12:45:31 -0000 Subject: [Bug 50896] Re: PC does not turn off in the K7 kernel 2.6.15-25 References: <20060625032957.23311.34067.malonedeb@gangotri.ubuntu.com> Message-ID: <20060717124531.2126.51184.malone@gandwana.ubuntu.com> What is the error? Can you please explain a bit more? -- PC does not turn off in the K7 kernel 2.6.15-25 https://launchpad.net/bugs/50896 From acojlo at gmail.com Mon Jul 17 13:27:13 2006 From: acojlo at gmail.com (Aleksandar) Date: Mon, 17 Jul 2006 13:27:13 -0000 Subject: [Bug 30093] Re: Suspend does not work on FSC Amilo Pro V2030 References: <20060130193636.9344.82942.malonedeb@gandwana.ubuntu.com> Message-ID: <20060717132713.1979.75428.malone@gangotri.ubuntu.com> I am experiencing same machine behaviour. So, what can we do? I am willing to test, but I need some skilled governor :) to manage my steps. This problem is very very important to me. How can I help? Maybe, post dsdt, post fixed dsdt, ...? -- Suspend does not work on FSC Amilo Pro V2030 https://launchpad.net/bugs/30093 From meets at free.fr Mon Jul 17 14:26:22 2006 From: meets at free.fr (Joyce Markoll) Date: Mon, 17 Jul 2006 14:26:22 -0000 Subject: [Bug 52953] Re: Proprietary Firmware in default Linux-image-xxx References: <20060714111648.13020.96743.malonedeb@gandwana.ubuntu.com> Message-ID: <20060717142622.1931.99566.malone@gangotri.ubuntu.com> The Ubuntu policy is clear and not clear at same time. On one part it says it's free opensource, on the other, it may contain non free components. There are several talks about the subject, on at least 2 french Ubuntu communities, and on the english mailing list ubuntu-users. Some people thought it should be reported as a bug. I also thought it should be presented this way. It's not even a matter of technics, as these components can be made available out of any obligation of having them if not needed or desired. The fact that the policy is not clear can be considered as a bug. -- Proprietary Firmware in default Linux-image-xxx https://launchpad.net/bugs/52953 From gnomefreak at gmail.com Mon Jul 17 16:29:39 2006 From: gnomefreak at gmail.com (John Vivirito) Date: Mon, 17 Jul 2006 16:29:39 -0000 Subject: [Bug 52701] Re: Latest edgy kernel fails to boot (2.6.17-4-k7) References: <20060711214335.27312.55793.malonedeb@gangotri.ubuntu.com> Message-ID: <20060717162939.2082.20.launchpad@gandwana.ubuntu.com> *** This bug is a duplicate of bug 52416 *** ** Bug 52416 has been marked a duplicate of this bug ** This bug has been marked a duplicate of bug 52416 Kernel panic on startup -- Latest edgy kernel fails to boot (2.6.17-4-k7) https://launchpad.net/bugs/52701 From gnomefreak at gmail.com Mon Jul 17 16:29:39 2006 From: gnomefreak at gmail.com (John Vivirito) Date: Mon, 17 Jul 2006 16:29:39 -0000 Subject: [Bug 52416] Re: Kernel panic on startup References: <20060709101808.27312.14390.malonedeb@gangotri.ubuntu.com> Message-ID: <20060717162939.2082.44490.launchpad@gandwana.ubuntu.com> ** This bug has been marked a duplicate of bug 52701 Latest edgy kernel fails to boot (2.6.17-4-k7) ** This bug is no longer a duplicate of bug 52701 Latest edgy kernel fails to boot (2.6.17-4-k7) ** Bug 52701 has been marked a duplicate of this bug -- Kernel panic on startup https://launchpad.net/bugs/52416 From askwar at digitalprojects.com Mon Jul 17 17:50:22 2006 From: askwar at digitalprojects.com (Alexander Skwar) Date: Mon, 17 Jul 2006 17:50:22 -0000 Subject: [Bug 53163] Re: Sound very jerky with 2.6.15-26 kernel and modules References: <20060716173031.1979.28376.malonedeb@gangotri.ubuntu.com> Message-ID: <20060717175022.1979.11009.malone@gangotri.ubuntu.com> The jerkiness is also apparent with ``aplay -Dplughw:0 /usr/share/sounds/startup.wav''. But it's not just the "jerkiness", the real problem is, that I cannot login into Gnome anymore. To be able to start Gnome, I've got to kill esd. Then the applications startup just fine - until the next sound is played. -- Sound very jerky with 2.6.15-26 kernel and modules https://launchpad.net/bugs/53163 From bkuhn at ebb.org Mon Jul 17 18:08:13 2006 From: bkuhn at ebb.org (Bradley M. Kuhn) Date: Mon, 17 Jul 2006 18:08:13 -0000 Subject: [Bug 50031] Re: [regression] Suspend [to-RAM and to-disk] is broken in 2.6.15-25.43 References: <20060616182146.13137.51951.malonedeb@gandwana.ubuntu.com> Message-ID: <20060717180813.1931.40757.malone@gangotri.ubuntu.com> I can confirm that with the upgrade from Breezy -> Dapper many Thinkpad models (T40, T41, T42 and X40) that had fully functioning suspend to disk working no longer work. As of the latest updates, I still don't have it reliably working, although it works on every fifth or sixth attempt. -- [regression] Suspend [to-RAM and to-disk] is broken in 2.6.15-25.43 https://launchpad.net/bugs/50031 From florian at boucault.ath.cx Mon Jul 17 18:35:31 2006 From: florian at boucault.ath.cx (Kaleo) Date: Mon, 17 Jul 2006 18:35:31 -0000 Subject: [Bug 50031] Re: [regression] Suspend [to-RAM and to-disk] is broken in 2.6.15-25.43 References: <20060616182146.13137.51951.malonedeb@gandwana.ubuntu.com> Message-ID: <20060717183531.2082.20438.malone@gandwana.ubuntu.com> I stopped using the proprietary module hsfmodem (from Linuxant) and surprisingly (irony here) the suspend to RAM now works reliably ! Are you guys using this same module ? (it would make sense because you can find the modem I am using in lots of Thinkpads) -- [regression] Suspend [to-RAM and to-disk] is broken in 2.6.15-25.43 https://launchpad.net/bugs/50031 From pwwnow at gmail.com Mon Jul 17 18:59:53 2006 From: pwwnow at gmail.com (Peter Whittaker) Date: Mon, 17 Jul 2006 18:59:53 -0000 Subject: [Bug 50031] Re: [regression] Suspend [to-RAM and to-disk] is broken in 2.6.15-25.43 References: <20060616182146.13137.51951.malonedeb@gandwana.ubuntu.com> Message-ID: <20060717185953.2126.22558.malone@gandwana.ubuntu.com> AFAICT from searching for modem and hsfmodem in Synaptic, I do not have hsfmodem installed on my Thinkpad A20m - so that module is not the source of the trouble, at least here.... -- [regression] Suspend [to-RAM and to-disk] is broken in 2.6.15-25.43 https://launchpad.net/bugs/50031 From ylan.segal at gmail.com Mon Jul 17 19:51:15 2006 From: ylan.segal at gmail.com (Ylan) Date: Mon, 17 Jul 2006 19:51:15 -0000 Subject: [Bug 53293] USB device not recognized in powered hub (patch) References: <20060717195115.1931.30611.malonedeb@gangotri.ubuntu.com> Message-ID: <20060717195115.1931.30611.malonedeb@gangotri.ubuntu.com> Public bug reported: From: http://marc.theaimsgroup.com/?l=linux-usb-devel&m=115092788712812&w=2 "Some hubs claim not to support port-power switching, and right now the hub driver believes them and does not enable power to their ports. However it turns out that even though they don't actually switch power, they do ignore all events on a port until told to turn on the power! This problem has been reported by several users. This revised patch (as672b) makes the hub driver always try to turn on port power to all hubs, regardless of what the hub descriptor says. It also adds a comment explaining the need for this. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman " I have applied the attached patche to the 2.6.15 linux source and it works perfectly. Can this be added to the next security release of the kernel? ** Affects: linux-source-2.6.15 (Ubuntu) Importance: Untriaged Status: Unconfirmed -- USB device not recognized in powered hub (patch) https://launchpad.net/bugs/53293 From ylan.segal at gmail.com Mon Jul 17 19:52:50 2006 From: ylan.segal at gmail.com (Ylan) Date: Mon, 17 Jul 2006 19:52:50 -0000 Subject: [Bug 53293] Attached patch References: <20060717195115.1931.30611.malonedeb@gangotri.ubuntu.com> Message-ID: <20060717195250.2126.75304.malone@gandwana.ubuntu.com> See attached. -- USB device not recognized in powered hub (patch) https://launchpad.net/bugs/53293 From Simon80 at gmail.com Mon Jul 17 20:42:07 2006 From: Simon80 at gmail.com (Simon80) Date: Mon, 17 Jul 2006 20:42:07 -0000 Subject: [Bug 53300] nosmp bootparam causes system hang while running /scripts/local-top References: <20060717204207.2126.74448.malonedeb@gandwana.ubuntu.com> Message-ID: <20060717204207.2126.74448.malonedeb@gandwana.ubuntu.com> Public bug reported: not sure what the problem is, but on two different k7 systems with similar setups, I've tried adding nosmp to the kernel line in grub, and then the system hangs after local-top has started running. If the nosmp argument is removed, the system boots properly. example grub stanza: title Ubuntu, kernel 2.6.15-26-k7 root (hd0,1) kernel /vmlinuz-2.6.15-26-k7 root=/dev/hda7 ro splash vga=792 nosmp initrd /initrd.img-2.6.15-26-k7 savedefault boot ** Affects: linux-source-2.6.15 (Ubuntu) Importance: Untriaged Status: Unconfirmed -- nosmp bootparam causes system hang while running /scripts/local-top https://launchpad.net/bugs/53300 From dennis at kaarsemaker.net Mon Jul 17 22:34:30 2006 From: dennis at kaarsemaker.net (Dennis Kaarsemaker) Date: Mon, 17 Jul 2006 22:34:30 -0000 Subject: [Bug 52953] Re: [Bug 52953] Re: Proprietary Firmware in default Linux-image-xxx References: <20060714111648.13020.96743.malonedeb@gandwana.ubuntu.com> <20060717142622.1931.99566.malone@gangotri.ubuntu.com> Message-ID: <1153175670.5342.29.camel@mirage> > The Ubuntu policy is clear and not clear at same time. >From http://www.ubuntu.com/ubuntu/licensing Documentation, Firmware, and Drivers Ubuntu contains licensed and copyrighted works that are not application software. For example, the default Ubuntu installation includes documentation, images, sounds, video clips and firmware. The Ubuntu community will make decisions on the inclusion of these works on a case-by-case basis, ensuring that these works do not restrict our ability to make Ubuntu available free of charge, and that Ubuntu remains redistributable by you. -- Proprietary Firmware in default Linux-image-xxx https://launchpad.net/bugs/52953 From emisca at rocketmail.com Mon Jul 17 23:21:02 2006 From: emisca at rocketmail.com (Emilio Scalise) Date: Mon, 17 Jul 2006 23:21:02 -0000 Subject: [Bug 53308] usb modules are loaded in initramfs before resume suspend to disk References: <20060717220711.1979.68755.malonedeb@gangotri.ubuntu.com> Message-ID: <20060717232102.2082.244.launchpad@canonical@gandwana.ubuntu.com> Public bug reported: By default uhci_hcd, ehci_hcd and ohci_hcd are loaded in initramfs on boot, also when the system has to be resumed from suspend to disk (swsusp1). This cause a failure on usb wakeup on my machines (an acer 2012wlmi laptop and a desktop computer, P5ND2-SLI (nforce 4 intel edition) with a P4). If I set mkinitramfs to load only the list of strictly necessary modules usb will survive after resume (it handles well wakeup). I know that usb modules can't be easily removed from an initrd as someone could boot from usb disks... but what you think about adding an option to select to not include them? Or at least document this behaviour..... Bye ** Affects: linux-source-2.6.15 (Ubuntu) Importance: Untriaged Status: Unconfirmed -- usb modules are loaded in initramfs before resume suspend to disk https://launchpad.net/bugs/53308 From mjg59 at codon.org.uk Mon Jul 17 23:21:48 2006 From: mjg59 at codon.org.uk (Matthew Garrett) Date: Mon, 17 Jul 2006 23:21:48 -0000 Subject: [Bug 53308] Re: usb modules are loaded in initramfs before resume suspend to disk References: <20060717220711.1979.68755.malonedeb@gangotri.ubuntu.com> Message-ID: <20060717232148.2126.58033.malone@gandwana.ubuntu.com> Can you describe the failure? What does dmesg look like? ** Changed in: acpi-support (Ubuntu) Sourcepackagename: acpi-support => linux-source-2.6.15 ** Summary changed: - usb modules are loaded in initramfs before resume suspend to disk + having usb modules loaded may cause failure to resume from disk -- having usb modules loaded may cause failure to resume from disk https://launchpad.net/bugs/53308 From philipix at gmail.com Mon Jul 17 23:52:42 2006 From: philipix at gmail.com (Philipi) Date: Mon, 17 Jul 2006 23:52:42 -0000 Subject: [Bug 50896] Re: [Bug 50896] Re: PC does not turn off in the K7 kernel 2.6.15-25 References: <20060625032957.23311.34067.malonedeb@gangotri.ubuntu.com> <20060717124531.2126.51184.malone@gandwana.ubuntu.com> Message-ID: I think is a problem with ACPI. When I try to shutdown my PC, Ubuntu does all normal things, the HDs shutdown, but fans and monitor doesn't. The last message ''will now halt" remains there until I press the Power Button. There is a guy with the same problem here: http://www.ubuntuforums.org/showthread.php?t=216610&highlight=halt+acpi The kernel 2.6.15-23 was shutting down correctly. Only when I updated to 2.6.7.15-25 (and 26 too) I started to get these problems. I don't know if it is a bug or a misconfiguration, but it's a strange thing. Thanks for your answer. Philipi Pinto 2006/7/17, Onkar Shinde : > What is the error? Can you please explain a bit more? > > -- > PC does not turn off in the K7 kernel 2.6.15-25 > https://launchpad.net/bugs/50896 > -- PC does not turn off in the K7 kernel 2.6.15-25 https://launchpad.net/bugs/50896 From ben.collins at ubuntu.com Tue Jul 18 02:27:24 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Tue, 18 Jul 2006 02:27:24 -0000 Subject: [Bug 53300] Re: [Bug 53300] nosmp bootparam causes system hang while running /scripts/local-top References: <20060717204207.2126.74448.malonedeb@gandwana.ubuntu.com> Message-ID: <1153189644.651.18.camel@grayson> On Mon, 2006-07-17 at 20:42 +0000, Simon80 wrote: > Public bug reported: > > not sure what the problem is, but on two different k7 systems with > similar setups, I've tried adding nosmp to the kernel line in grub, and > then the system hangs after local-top has started running. If the nosmp > argument is removed, the system boots properly. I'll check into this, however remember that "nosmp" is rather useless in our SMP kernels unless you actually have an SMP system in which you want to limit it to 1 CPU. On a UP (single CPU) system, our kernels use a method called smp-alternatives, which pretty much makes it run like a UP kernel. -- nosmp bootparam causes system hang while running /scripts/local-top https://launchpad.net/bugs/53300 From onkarshinde at rediffmail.com Tue Jul 18 07:33:28 2006 From: onkarshinde at rediffmail.com (Onkar Shinde) Date: Tue, 18 Jul 2006 07:33:28 -0000 Subject: [Bug 50896] Re: PC does not turn off in the K7 kernel 2.6.15-25 References: <20060625032957.23311.34067.malonedeb@gangotri.ubuntu.com> Message-ID: <20060718073328.27545.69470.launchpad@gangotri.ubuntu.com> *** This bug is a duplicate of bug 43961 *** ** This bug has been marked a duplicate of bug 43961 Power down after shutdown does not work... -- PC does not turn off in the K7 kernel 2.6.15-25 https://launchpad.net/bugs/50896 From onkarshinde at rediffmail.com Tue Jul 18 07:33:28 2006 From: onkarshinde at rediffmail.com (Onkar Shinde) Date: Tue, 18 Jul 2006 07:33:28 -0000 Subject: [Bug 43961] Re: Power down after shutdown does not work... References: <20060510072310.21520.62027.malonedeb@gandwana.ubuntu.com> Message-ID: <20060718073328.27545.50956.launchpad@gangotri.ubuntu.com> ** Bug 50896 has been marked a duplicate of this bug -- Power down after shutdown does not work... https://launchpad.net/bugs/43961 From martin.pitt at ubuntu.com Tue Jul 18 07:42:51 2006 From: martin.pitt at ubuntu.com (Martin Pitt) Date: Tue, 18 Jul 2006 07:42:51 -0000 Subject: [Bug 53048] Re: Kernel 2.6 bug local race (proc) References: <20060715105847.13020.14485.malonedeb@gandwana.ubuntu.com> Message-ID: <20060718074251.27545.89226.launchpad@gangotri.ubuntu.com> ** Also affects: linux-source-2.6.12 (Ubuntu) Importance: Untriaged Status: Unconfirmed ** Also affects: linux-source-2.6.10 (Ubuntu) Importance: Untriaged Status: Unconfirmed ** Changed in: linux-source-2.6.10 (Ubuntu) Importance: Untriaged => Critical Assignee: (unassigned) => ChuckShort Status: Unconfirmed => In Progress ** Changed in: linux-source-2.6.12 (Ubuntu) Importance: Untriaged => Critical Status: Unconfirmed => In Progress -- Kernel 2.6 bug local race (proc) https://launchpad.net/bugs/53048 From martin.pitt at ubuntu.com Tue Jul 18 07:51:13 2006 From: martin.pitt at ubuntu.com (Martin Pitt) Date: Tue, 18 Jul 2006 07:51:13 -0000 Subject: [Bug 53048] Re: Kernel 2.6 bug local race (proc) References: <20060715105847.13020.14485.malonedeb@gandwana.ubuntu.com> Message-ID: <20060718075113.27589.78705.malone@gangotri.ubuntu.com> http://www.ubuntu.com/usn/usn-319-1 ** Changed in: linux-source-2.6.15 (Ubuntu) Importance: Untriaged => Critical Assignee: (unassigned) => Ben Collins Status: Unconfirmed => Fix Released -- Kernel 2.6 bug local race (proc) https://launchpad.net/bugs/53048 From eaton.lists at gmail.com Tue Jul 18 11:59:05 2006 From: eaton.lists at gmail.com (Brian Eaton) Date: Tue, 18 Jul 2006 11:59:05 -0000 Subject: [Bug 30557] Re: cpu idle time in /proc/stat wrong References: <20060205141542.11709.55517.malonedeb@gandwana.ubuntu.com> Message-ID: <20060718115905.22850.92622.malone@gandwana.ubuntu.com> The problem and the fix are described in these notes to LKML: http://lkml.org/lkml/2005/12/8/304 There are some further changes upstream to deal with bugs in the first set of patches. Right now I'm running the Ubuntu 2.6.15-26 code with this set of patches, and things look good: 5a07a30c3cc4dc438494d6416ffa74008a2194b3 6eb0a0fd059598ee0d49c6283ce25cccd743e9fc d25bf7e5fe73b5b6d2246ab0be08ae35d718456b 76b461c21468f41837283b7888d55f1c0671f719 -- cpu idle time in /proc/stat wrong https://launchpad.net/bugs/30557 From crassico at gmail.com Tue Jul 18 12:22:13 2006 From: crassico at gmail.com (panurge77) Date: Tue, 18 Jul 2006 12:22:13 -0000 Subject: [Bug 33714] Re: r818x not working References: <20060304162930.17525.6725.malonedeb@gangotri.ubuntu.com> Message-ID: <20060718122213.27545.2350.malone@gangotri.ubuntu.com> The problem with rtl8180 and ndiswrapper using wep is in /etc/network/interfaces. If you use the windows driver you need to set your key before the essid, and you need to specify what kinda authentication you have In my interfaces file I need to set wireless open key ******* wireless essid ****** Instead of wireles essid ****** wireless key ***** -- r818x not working https://launchpad.net/bugs/33714 From crassico at gmail.com Tue Jul 18 12:25:43 2006 From: crassico at gmail.com (panurge77) Date: Tue, 18 Jul 2006 12:25:43 -0000 Subject: [Bug 38884] Re: rtl818x - System hangs when uploading files. References: <20060409144601.32233.18688.malonedeb@gandwana.ubuntu.com> Message-ID: <20060718122543.22894.43912.malone@gandwana.ubuntu.com> This issue is still a bugger in edgy. I've just tried the new kernel 2.6.17-5-k7 and had the usual total freeze. I'll try compiling the driver from cvs and see what happens when I find the time. Ndiswrapper still works flawlessly. -- rtl818x - System hangs when uploading files. https://launchpad.net/bugs/38884 From frogzoo at chilli.net.au Tue Jul 18 13:04:38 2006 From: frogzoo at chilli.net.au (frogzoo) Date: Tue, 18 Jul 2006 13:04:38 -0000 Subject: [Bug 50321] Re: Sony VAIO VGN-S4HP: delay of two minutes booting References: <20060619104720.13137.60999.malonedeb@gandwana.ubuntu.com> Message-ID: <20060718130438.27545.74576.malone@gangotri.ubuntu.com> try the 386 kernel this bug looks like a dupe of Bug #50313: -- Sony VAIO VGN-S4HP: delay of two minutes booting https://launchpad.net/bugs/50321 From etienne.pallier at cesr.fr Tue Jul 18 13:42:43 2006 From: etienne.pallier at cesr.fr (Steven) Date: Tue, 18 Jul 2006 13:42:43 -0000 Subject: [Bug 33116] Re: powernow-k8 refuses to load (fedora 5) References: <20060228031323.27016.20737.malonedeb@gangotri.ubuntu.com> Message-ID: <20060718134243.22894.10429.malone@gandwana.ubuntu.com> I have the same problem with a bi-pro AMD 64 running fedora 5 : $ dmesg |grep powernow powernow-k8: Found 2 AMD Athlon 64 / Opteron processors (version 1.60.2) powernow-k8: MP systems not supported by PSB BIOS structure powernow-k8: MP systems not supported by PSB BIOS structure I updated from kernel 2.6.15 to kernel 2.6.17 (2.6.17-1.2157_FC5 #1 SMP) but the problem is still there... Anyway, the server seems to be working fine. Should I worry ? Should I rebuild the source kernel without the option "cpu hotplug" ? -- powernow-k8 refuses to load https://launchpad.net/bugs/33116 From joerg.unglaub at gmail.com Tue Jul 18 13:44:36 2006 From: joerg.unglaub at gmail.com (joe) Date: Tue, 18 Jul 2006 13:44:36 -0000 Subject: [Bug 51084] Re: Computer does not halt References: <20060627071524.15610.60906.malonedeb@gandwana.ubuntu.com> Message-ID: <20060718134436.22850.85218.malone@gandwana.ubuntu.com> *** This bug is a duplicate of bug 43961 *** My Computer also stops saying "Will now halt" -> harddisk off, wlan semi off (Blinks like no driver loaded), fan up, display up, lights up ubuntu version is egdy eft with linux-image-2.6.17-5-686 with the dapper kernel there was no problem shutting down the system ** Changed in: Ubuntu Sourcepackagename: None => linux-source-2.6.17 Status: Needs Info => Confirmed -- Computer does not halt https://launchpad.net/bugs/51084 From joerg.unglaub at gmail.com Tue Jul 18 13:51:41 2006 From: joerg.unglaub at gmail.com (joe) Date: Tue, 18 Jul 2006 13:51:41 -0000 Subject: [Bug 51084] Re: Computer does not halt References: <20060627071524.15610.60906.malonedeb@gandwana.ubuntu.com> Message-ID: <20060718135141.22850.63831.launchpad@gandwana.ubuntu.com> *** This bug is a duplicate of bug 43961 *** ** This bug has been marked a duplicate of bug 43961 Power down after shutdown does not work... -- Computer does not halt https://launchpad.net/bugs/51084 From joerg.unglaub at gmail.com Tue Jul 18 13:51:41 2006 From: joerg.unglaub at gmail.com (joe) Date: Tue, 18 Jul 2006 13:51:41 -0000 Subject: [Bug 43961] Re: Power down after shutdown does not work... References: <20060510072310.21520.62027.malonedeb@gandwana.ubuntu.com> Message-ID: <20060718135141.22850.4509.launchpad@gandwana.ubuntu.com> ** Bug 51084 has been marked a duplicate of this bug -- Power down after shutdown does not work... https://launchpad.net/bugs/43961 From elhigu at gmail.com Tue Jul 18 14:14:57 2006 From: elhigu at gmail.com (elhigu) Date: Tue, 18 Jul 2006 14:14:57 -0000 Subject: [Bug 44173] Dapper Flight 7 didn't find any if my PCI cards References: <20060511085135.21520.51591.malonedeb@gandwana.ubuntu.com> Message-ID: <20060718141457.5833.8857.launchpad@canonical@gandwana.ubuntu.com> Public bug reported: Hi, I tried to install Flight 7 with following hardware: * Abit VP motherboard with dual P3 processors * Maxtor 133 IDE card (promise drivers works) * two 3com cards (uses 3c59x driver) * SB Live Installer also said that there is FireWire adapter found from the system, although the computer doesn't have any FireWire adapters... Only thing that the installer found was the Radeon 9200SE in AGP slot. Breezy 5.1 found all the hardware without problems. ** Affects: linux-source-2.6.15 (Ubuntu) Importance: Medium Status: Needs Info -- Dapper Flight 7 didn't find any if my PCI cards https://launchpad.net/bugs/44173 From cjwatson at canonical.com Tue Jul 18 14:15:11 2006 From: cjwatson at canonical.com (Colin Watson) Date: Tue, 18 Jul 2006 14:15:11 -0000 Subject: [Bug 44173] Re: Dapper Flight 7 didn't find any if my PCI cards References: <20060511085135.21520.51591.malonedeb@gandwana.ubuntu.com> Message-ID: <20060718141511.32087.51581.malone@gangotri.ubuntu.com> OK, I think this must be a kernel bug then. ** Changed in: ubiquity (Ubuntu) Sourcepackagename: ubiquity => linux-source-2.6.15 -- Dapper Flight 7 didn't find any if my PCI cards https://launchpad.net/bugs/44173 From allen at allenjeter.com Tue Jul 18 17:04:00 2006 From: allen at allenjeter.com (Sheik Yerbouti) Date: Tue, 18 Jul 2006 17:04:00 -0000 Subject: [Bug 53365] Kernel timer resolution too low References: <20060718170400.32029.42425.malonedeb@gangotri.ubuntu.com> Message-ID: <20060718170400.32029.42425.malonedeb@gangotri.ubuntu.com> Public bug reported: Binary package hint: linux-image-2.6-686-smp The kernel timer resolution option in the stock kernel is too low for MIDI. It is compiled with the option 250hz it should be 1000hz. Also this gets changed from kernel release to kernel release. ** Affects: linux-meta (Ubuntu) Importance: Untriaged Status: Unconfirmed -- Kernel timer resolution too low https://launchpad.net/bugs/53365 From ilmari at ilmari.org Tue Jul 18 18:09:03 2006 From: ilmari at ilmari.org (=?utf-8?q?Dagfinn_Ilmari_Manns=C3=A5ker?=) Date: Tue, 18 Jul 2006 18:09:03 -0000 Subject: [Bug 51602] Re: Racoon won't load on dapper's 686 kernel References: <20060702145738.17086.21204.malonedeb@gangotri.ubuntu.com> Message-ID: <20060718180904.32087.45535.launchpad@gangotri.ubuntu.com> *** This bug is a duplicate of bug 44246 *** ** This bug has been marked a duplicate of bug 44246 racoon-0.6.5-4ubuntu1 fails to configure -- Racoon won't load on dapper's 686 kernel https://launchpad.net/bugs/51602 From ilmari at ilmari.org Tue Jul 18 18:09:03 2006 From: ilmari at ilmari.org (=?utf-8?q?Dagfinn_Ilmari_Manns=C3=A5ker?=) Date: Tue, 18 Jul 2006 18:09:03 -0000 Subject: [Bug 44246] Re: racoon-0.6.5-4ubuntu1 fails to configure References: <20060511180813.15848.37980.malonedeb@gangotri.ubuntu.com> Message-ID: <20060718180904.32087.78901.launchpad@gangotri.ubuntu.com> ** Bug 51602 has been marked a duplicate of this bug -- racoon-0.6.5-4ubuntu1 fails to configure https://launchpad.net/bugs/44246 From 84yelo3 at gmail.com Tue Jul 18 18:45:50 2006 From: 84yelo3 at gmail.com (=?utf-8?q?Nicol=C3=B2_Chieffo?=) Date: Tue, 18 Jul 2006 18:45:50 -0000 Subject: [Bug 36964] Re: [dapper] Asus sd/mmc card reader not working References: <20060328082753.6253.5275.malonedeb@gandwana.ubuntu.com> Message-ID: <20060718184550.22850.75490.launchpad@gandwana.ubuntu.com> ** Also affects: linux-source-2.6.17 (Ubuntu) Importance: Untriaged Status: Unconfirmed -- [dapper] Asus sd/mmc card reader not working https://launchpad.net/bugs/36964 From gnomefreak at gmail.com Tue Jul 18 18:56:15 2006 From: gnomefreak at gmail.com (John Vivirito) Date: Tue, 18 Jul 2006 18:56:15 -0000 Subject: [Bug 49070] Re: Hangs on Mounting root file system References: <20060608233827.22534.99055.malonedeb@gangotri.ubuntu.com> Message-ID: <20060718185615.32029.90131.malone@gangotri.ubuntu.com> Can you please try to reproduce this and give all output you can. The more info you can give us the better. The errors along with your pc specs. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Unconfirmed => Needs Info -- Hangs on Mounting root file system https://launchpad.net/bugs/49070 From denis.porthault at laposte.net Tue Jul 18 19:08:29 2006 From: denis.porthault at laposte.net (Denis PORTHAULT) Date: Tue, 18 Jul 2006 19:08:29 -0000 Subject: [Bug 38865] Same problem solved with recompilation of sk98lin References: <20060409125752.32313.97119.malonedeb@gandwana.ubuntu.com> Message-ID: <20060718190829.22850.73428.malone@gandwana.ubuntu.com> My Asus P5GDC ICH6 chipset broke down, and I resolved to switch to a P5LD2. Both have a Marvell 88E805 gigabit Ethernet controller. Unfortunately, the sky2 driver which worked fine on my previous mainboard freezes after a few seconds with the new one ... Maybe a revision problem ? I compiled the newest sk98lin, and it's now working. Thanks a lot to all of you ! -- sky2 driver freezing system after ifdown and ifup https://launchpad.net/bugs/38865 From freddie at witherden.org Tue Jul 18 20:36:24 2006 From: freddie at witherden.org (EvilGuru) Date: Tue, 18 Jul 2006 20:36:24 -0000 Subject: [Bug 53078] Re: Linux Kernel 2.6.15-26-386 gives an 'crc' error at boot-up References: <20060715183355.1931.17897.malonedeb@gangotri.ubuntu.com> Message-ID: <20060718203624.32029.39618.malone@gangotri.ubuntu.com> Right, first of all, sorry for the double post last time, my browser was playing up. Next, today I found that there was a kernel update: The following packages will be upgraded: linux-image-2.6.15-26-386 1 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. Need to get 21.6MB of archives So I updated it and rebooted. And.. it booted without any problems. However, I did find that X.org failed to start and I was chucked back to the command line. I presume that this is because of the ABI breakages in 2.6.25-26 and because of the fact that I use the proprietary nVidia drivers. So the bug seems to be fixed, however I would really appreciate if anyone could tell me, or give me a link to where I could find out how to fix these module breakages. Thank you very much for you support/help. -- Linux Kernel 2.6.15-26-386 gives an 'crc' error at boot-up https://launchpad.net/bugs/53078 From Rostislav.Svoboda at gmail.com Tue Jul 18 21:19:19 2006 From: Rostislav.Svoboda at gmail.com (Bost) Date: Tue, 18 Jul 2006 21:19:19 -0000 Subject: [Bug 38865] Re: [Bug 38865] Same problem solved with recompilation of sk98lin References: <20060409125752.32313.97119.malonedeb@gandwana.ubuntu.com> <20060718190829.22850.73428.malone@gandwana.ubuntu.com> Message-ID: <286817520607181419t2d1d23b2s379371a1ee2bfe68@mail.gmail.com> I've got the feeling this sky2 bug's been here quite a long. Where's the problem guys? Not enough info? Complicated logic? No time? I mean I doubt I'll be able to find'n'fix the bug(s) but who knows...? On 7/18/06, Denis PORTHAULT wrote: > My Asus P5GDC ICH6 chipset broke down, and I resolved to switch to a P5LD2. > Both have a Marvell 88E805 gigabit Ethernet controller. > Unfortunately, the sky2 driver which worked fine on my previous mainboard freezes after a few seconds with the new one ... Maybe a revision problem ? > I compiled the newest sk98lin, and it's now working. > Thanks a lot to all of you ! -- sky2 driver freezing system after ifdown and ifup https://launchpad.net/bugs/38865 From peterbe at sonic.net Tue Jul 18 21:33:49 2006 From: peterbe at sonic.net (Peter Belew) Date: Tue, 18 Jul 2006 21:33:49 -0000 Subject: [Bug 53207] Re: Sound misfunctions with kernel 2.6.15-26-386 on Jetway MB References: <20060717050214.1931.83828.malonedeb@gangotri.ubuntu.com> Message-ID: <20060718213349.22850.54226.malone@gandwana.ubuntu.com> I just installed the 17 July 2006 build of the kernel 2.6.15-26-386 - this made no difference in this problem. Again, I had to revert to the 2.6.15-25-386 kernel. -- Sound misfunctions with kernel 2.6.15-26-386 on Jetway MB https://launchpad.net/bugs/53207 From ben.collins at ubuntu.com Tue Jul 18 21:31:27 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Tue, 18 Jul 2006 21:31:27 -0000 Subject: [Bug 53078] Re: Linux Kernel 2.6.15-26-386 gives an 'crc' error at boot-up References: <20060715183355.1931.17897.malonedeb@gangotri.ubuntu.com> Message-ID: <20060718213127.32029.79596.malone@gangotri.ubuntu.com> Please be sure that this is the case. I cannot find where this message comes from. When you boot, get to the grub menu, and edit the menu entry for this kernel. Make sure that both flags are absent from the command line. Thanks -- Linux Kernel 2.6.15-26-386 gives an 'crc' error at boot-up https://launchpad.net/bugs/53078 From r1z83 at speakeasy.net Tue Jul 18 21:43:57 2006 From: r1z83 at speakeasy.net (Gilbert) Date: Tue, 18 Jul 2006 21:43:57 -0000 Subject: [Bug 50898] Re: Can't boot with kernel 2.6.15-25 References: <20060625065126.29559.32737.malonedeb@gandwana.ubuntu.com> Message-ID: <20060718214357.32087.68793.malone@gangotri.ubuntu.com> Getting the same issue on an Asus z71 using today's released kernel, 2.6.15-26-45 Booted normally w/o the splash screen and get the following: udevplug[978]: make_queue: unable to create /dev/.udev/queue: No such file or directory -- Can't boot with kernel 2.6.15-25 https://launchpad.net/bugs/50898 From hellan at acm.org Tue Jul 18 21:46:01 2006 From: hellan at acm.org (=?utf-8?q?Jon_K=C3=A5re_Hellan?=) Date: Tue, 18 Jul 2006 21:46:01 -0000 Subject: [Bug 38191] Re: Anydata CDMA modem driver not working References: <20060405134413.25542.96344.malonedeb@gangotri.ubuntu.com> Message-ID: <20060718214601.32029.44853.malone@gangotri.ubuntu.com> This is due to a typo in drivers/usb/serial/anydata.c, see http://article.gmane.org/gmane.linux.usb.devel/45050. The workaround is to do modprobe usbserial vendor=0x16d5 product=0x6501 before plugging in the modem. In my experience, the 'option' driver handles this modem better than the anydata driver. If you feel up to building your own kernel, you should copy the line { USB_DEVICE(0x16d5, 0x6501) }, in id_table from anydata.c to option.c and not build the anydata driver at all. See http://article.gmane.org/gmane.linux.usb.devel/44981 -- Anydata CDMA modem driver not working https://launchpad.net/bugs/38191 From torenc at gmail.com Tue Jul 18 22:56:57 2006 From: torenc at gmail.com (TorenC) Date: Tue, 18 Jul 2006 22:56:57 -0000 Subject: [Bug 43745] Re: Ubuntu corrupts real time clock on some dell laptops References: <20060509053346.20684.57755.malonedeb@gangotri.ubuntu.com> Message-ID: <20060718225657.5833.7894.malone@gandwana.ubuntu.com> I also have a Dell Latitude D820, with BIOS vA01. I experienced the frozen GRUB boot timer while running some of the Dapper betas, but once I installed the actual 6.06 release, my GRUB timer started working again. I've also never experienced the BIOS corruption issue that others have. I also run 6.06 on a Dell Latitude X300, with no problems. just FYI. -- Ubuntu corrupts real time clock on some dell laptops https://launchpad.net/bugs/43745 From frogzoo at chilli.net.au Tue Jul 18 23:12:33 2006 From: frogzoo at chilli.net.au (frogzoo) Date: Tue, 18 Jul 2006 23:12:33 -0000 Subject: [Bug 50321] Re: Sony VAIO VGN-S4HP: delay of two minutes booting References: <20060619104720.13137.60999.malonedeb@gandwana.ubuntu.com> Message-ID: <20060718231234.22850.10286.launchpad@gandwana.ubuntu.com> *** This bug is a duplicate of bug 50313 *** ** This bug has been marked a duplicate of bug 50313 mounting root filesystem stuck -- Sony VAIO VGN-S4HP: delay of two minutes booting https://launchpad.net/bugs/50321 From frogzoo at chilli.net.au Tue Jul 18 23:12:33 2006 From: frogzoo at chilli.net.au (frogzoo) Date: Tue, 18 Jul 2006 23:12:33 -0000 Subject: [Bug 50313] Re: mounting root filesystem stuck References: <20060619100018.13137.57015.malonedeb@gandwana.ubuntu.com> Message-ID: <20060718231234.22850.79818.launchpad@gandwana.ubuntu.com> ** Bug 50321 has been marked a duplicate of this bug -- mounting root filesystem stuck https://launchpad.net/bugs/50313 From shapiro at math.umass.edu Wed Jul 19 00:40:27 2006 From: shapiro at math.umass.edu (geos) Date: Wed, 19 Jul 2006 00:40:27 -0000 Subject: [Bug 53404] upgrading from 2.6.15-23 to 2.6.15-26 causes slowdown References: <20060719004027.5833.17759.malonedeb@gandwana.ubuntu.com> Message-ID: <20060719004027.5833.17759.malonedeb@gandwana.ubuntu.com> Public bug reported: Binary package hint: linux-686-smp I am running Dapper on a ThinkPad X60s. When I upgraded the kernel image from the Live Install kernel which seems to be 2.6.15-23 to the latest dapper-security 2.6.15-26 (for some reason the package says 2.6.15-24 but the kernel image file says 26) I experience significant system slowdown. There don't appear to be any rogue processes in 'top' In addition, the slowdown is MUCH MUCH worse for the 2.6.15-26 686 SMP kernel than the 386 kernel, to the point of making the system basically unusable (you can't type without significant 'lag'). Going back to the 2.6.15-23 kernel seems to fix the slowdown. ** Affects: linux-meta (Ubuntu) Importance: Untriaged Status: Unconfirmed -- upgrading from 2.6.15-23 to 2.6.15-26 causes slowdown https://launchpad.net/bugs/53404 From Simon80 at gmail.com Wed Jul 19 00:55:06 2006 From: Simon80 at gmail.com (Simon80) Date: Wed, 19 Jul 2006 00:55:06 -0000 Subject: [Bug 53300] Re: nosmp bootparam causes system hang while running /scripts/local-top References: <20060717204207.2126.74448.malonedeb@gandwana.ubuntu.com> Message-ID: <20060719005506.32029.1999.malone@gangotri.ubuntu.com> Ah, ok. The reason I was looking into this was because the rt61 wireless driver does not support SMP kernels, so I was wondering if Ubuntu shipping an SMP PREMPT enabled kernel was causing the problems that I have been seeing with that module in 6.06. -- nosmp bootparam causes system hang while running /scripts/local-top https://launchpad.net/bugs/53300 From lcn at mail.pf Wed Jul 19 06:44:19 2006 From: lcn at mail.pf (lcn) Date: Wed, 19 Jul 2006 06:44:19 -0000 Subject: [Bug 45162] Re: Wrong acx111 PCI default firmware for DWL-G520+ References: <20060517020232.15142.83410.malonedeb@gandwana.ubuntu.com> Message-ID: <20060719064419.5833.52455.malone@gandwana.ubuntu.com> Hi, My wi-fi connection works. I use Ubuntu 6.06. Linux 2.6.15-25-386. Wi-fi PCI card D-Link DWL-G520+, H/W Ver. A3, F/W Ver. 1.0.11. How to do. The firmware tiacx111c16 in directories 1.2.0.30 and 1.2.1.34 work. But not the one in 2.3.1.31. cd /lib/firmware/2.6.15-23-386/acx/default rm tiacx111c16 ln -s ../1.2.0.30/tiacx111c16 tiacx111c16 or ln -s ../1.2.1.34/tiacx111c16 tiacx111c16 Nota : Seems working from channel 1 (2412 MHz) to channel 13 (2472 MHz). Didn't test with channel 14 (2484 MHz). I attached file from lspci -vv, lspci -vvn, lsusb. -- Wrong acx111 PCI default firmware for DWL-G520+ https://launchpad.net/bugs/45162 From lcn at mail.pf Wed Jul 19 06:51:55 2006 From: lcn at mail.pf (lcn) Date: Wed, 19 Jul 2006 06:51:55 -0000 Subject: [Bug 26703] Re: ACX Drivers -- needs updating. References: <20060113145051.21012.52657.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060719065155.32087.2395.malone@gangotri.ubuntu.com> Also reported in bug 45162. Hi, My wi-fi connection works. I use Ubuntu 6.06. Linux 2.6.15-25-386. Wi-fi PCI card D-Link DWL-G520+, H/W Ver. A3, F/W Ver. 1.0.11. How to do. The firmware tiacx111c16 in directories 1.2.0.30 and 1.2.1.34 work. But not the one in 2.3.1.31. cd /lib/firmware/2.6.15-23-386/acx/default rm tiacx111c16 ln -s ../1.2.0.30/tiacx111c16 tiacx111c16 or ln -s ../1.2.1.34/tiacx111c16 tiacx111c16 Nota : Seems working from channel 1 (2412 MHz) to channel 13 (2472 MHz). Didn't test with channel 14 (2484 MHz). I attached file from lspci -vv, lspci -vvn, lsusb. -- ACX Drivers -- needs updating. https://launchpad.net/bugs/26703 From cornelis at p-c-software.de Wed Jul 19 06:59:16 2006 From: cornelis at p-c-software.de (Patrick Cornelissen) Date: Wed, 19 Jul 2006 06:59:16 -0000 Subject: [Bug 47241] Re: freezes on boot References: <20060529075557.21895.60622.malonedeb@gandwana.ubuntu.com> Message-ID: <20060719065916.22850.8904.malone@gandwana.ubuntu.com> I tried to install Edgy on the same computer 3 days ago with the current edy CD image and I got the same problem. I don't understand why the Debian installer are working on this machine and the ubuntu installer freezes :-/ -- freezes on boot https://launchpad.net/bugs/47241 From martin.pitt at ubuntu.com Wed Jul 19 08:16:17 2006 From: martin.pitt at ubuntu.com (Martin Pitt) Date: Wed, 19 Jul 2006 08:16:17 -0000 Subject: [Bug 53048] Re: Kernel 2.6 bug local race (proc) References: <20060715105847.13020.14485.malonedeb@gandwana.ubuntu.com> Message-ID: <20060719081617.5833.70273.malone@gandwana.ubuntu.com> http://www.ubuntu.com/usn/usn-319-2 ** Changed in: linux-source-2.6.12 (Ubuntu) Status: In Progress => Fix Released -- Kernel 2.6 bug local race (proc) https://launchpad.net/bugs/53048 From martin.pitt at ubuntu.com Wed Jul 19 08:16:28 2006 From: martin.pitt at ubuntu.com (Martin Pitt) Date: Wed, 19 Jul 2006 08:16:28 -0000 Subject: [Bug 53048] Re: Kernel 2.6 bug local race (proc) References: <20060715105847.13020.14485.malonedeb@gandwana.ubuntu.com> Message-ID: <20060719081628.32029.68795.malone@gangotri.ubuntu.com> http://www.ubuntu.com/usn/usn-319-2 ** Changed in: linux-source-2.6.10 (Ubuntu) Status: In Progress => Fix Released -- Kernel 2.6 bug local race (proc) https://launchpad.net/bugs/53048 From martin.pitt at ubuntu.com Wed Jul 19 08:16:52 2006 From: martin.pitt at ubuntu.com (Martin Pitt) Date: Wed, 19 Jul 2006 08:16:52 -0000 Subject: [Bug 52145] Re: kernel freezes when binding bluetooth rfcomm on Ubuntu 5.10 References: <20060706201159.18493.88795.malonedeb@gandwana.ubuntu.com> Message-ID: <20060719081652.32029.72376.malone@gangotri.ubuntu.com> Fixed in this USN: http://www.ubuntu.com/usn/usn-319-2 Thanks, Chuck! ** Changed in: linux-source-2.6.12 (Ubuntu) Status: Confirmed => Fix Released -- kernel freezes when binding bluetooth rfcomm on Ubuntu 5.10 https://launchpad.net/bugs/52145 From tuxmym at gmail.com Wed Jul 19 09:50:05 2006 From: tuxmym at gmail.com (mym) Date: Wed, 19 Jul 2006 09:50:05 -0000 Subject: [Bug 52703] Re: Jerky video/DVD playback since kernel update References: <20060711215442.27257.14086.malonedeb@gangotri.ubuntu.com> Message-ID: <20060719095005.22850.78645.malone@gandwana.ubuntu.com> Same problem here, with kernel 2.6.15-24/25/26 As soon as I switch to 2.6.15-23 at boot, everything is working well again. * 2D/3D applications are really jerky * video playback too Ubuntu Dapper, laptop ACER Aspire 1694WLMI, Pentium M 2Ghz, 1Go DDR2, ATI X700 128Mo, last Ubuntu fglrx drivers. -- Jerky video/DVD playback since kernel update https://launchpad.net/bugs/52703 From bert at demontpx.com Wed Jul 19 09:57:30 2006 From: bert at demontpx.com (Bert Hekman) Date: Wed, 19 Jul 2006 09:57:30 -0000 Subject: [Bug 43745] Re: Ubuntu corrupts real time clock on some dell laptops References: <20060509053346.20684.57755.malonedeb@gangotri.ubuntu.com> Message-ID: <20060719095730.32087.92896.malone@gangotri.ubuntu.com> I've been using my Dell Inspiron 6400 for 3 weeks, almost every day. I've been running these kernels: 2.6.15-25-686 and 2.6.15-26-686. No problems at all. I guess the bug is fixed. Can anyone confirm? -- Ubuntu corrupts real time clock on some dell laptops https://launchpad.net/bugs/43745 From ttmrichter at gmail.com Wed Jul 19 10:36:31 2006 From: ttmrichter at gmail.com (Michael T. Richter) Date: Wed, 19 Jul 2006 10:36:31 -0000 Subject: [Bug 52319] Re: Sound Card on Haier H51 laptop is recognised, but not functional. References: <20060708105445.19629.95757.malonedeb@gandwana.ubuntu.com> Message-ID: <20060719103631.32087.80849.malone@gangotri.ubuntu.com> Is there any other things I can try on this? -- Sound Card on Haier H51 laptop is recognised, but not functional. https://launchpad.net/bugs/52319 From lostec at hotmail.fr Wed Jul 19 11:35:19 2006 From: lostec at hotmail.fr (Yann) Date: Wed, 19 Jul 2006 11:35:19 -0000 Subject: [Bug 49439] Re: No sound on Toshiba Satellite p100-114 with intel-hda chipset References: <20060612081247.25765.80831.malonedeb@gangotri.ubuntu.com> Message-ID: <20060719113519.22850.45272.malone@gandwana.ubuntu.com> Same Laptop... Same problem. Tried to compile ALSA 1.0.11 and 1.0.12-rc1 : Still no sound at all. After reading ALSA bug reports/linux.kernel archives on ALSA+Conexant subjects, it's not obvious we'll have a solution soon. Reason: "Conexant does not give hardware informations" (these are also the ones that already did the same stupid job with winmodems), dixit alsa coders... So, the only possible action would be to boycott any product that include Conexant devices. Too late for me but for the future it's now no more Toshiba products as they also dit not respond to my demands: I live in france and as well as in whole europe, manufacturers are compeled by law to give any needed technical informations if users request some (see huge fine Microsoft just got from europpean commission for the same reason: Not enough technical informations to coders of concurrent software...). I asked Toshiba france for that... says they do not provide support to this level. Responded they must do so for products they sell in france => No more response and not willing to pay a lawyer for that. But maybe some kind of class-action, at the moment impossible in france but under discution, could help in the future. Not really customer friendly anyway... and quite impossible to understa,d the reasons for that from Conexant/Toshiba... Anyway, if someone have tips to have a minimal sound system working with the generic codec alsa uses for this unsupported device? Regards. -- No sound on Toshiba Satellite p100-114 with intel-hda chipset https://launchpad.net/bugs/49439 From jouni.mettala at helsinki.fi Wed Jul 19 12:54:22 2006 From: jouni.mettala at helsinki.fi (Jouni Mettala) Date: Wed, 19 Jul 2006 12:54:22 -0000 Subject: [Bug 53015] Re: can't find /dev/hda1 References: <20060714194132.12867.24947.malonedeb@gandwana.ubuntu.com> Message-ID: <20060719125422.23514.81842.malone@gangotri.ubuntu.com> since ubuntu-desktop and ubuntu minimal both depends udev, closing. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Unconfirmed => Fix Released -- can't find /dev/hda1 https://launchpad.net/bugs/53015 From ylan.segal at gmail.com Wed Jul 19 13:28:55 2006 From: ylan.segal at gmail.com (Ylan) Date: Wed, 19 Jul 2006 13:28:55 -0000 Subject: [Bug 37163] Hardware problem all along References: <20060329132453.6279.44854.malonedeb@gandwana.ubuntu.com> Message-ID: <20060719132855.32445.70535.malone@gandwana.ubuntu.com> It turns out that all my problems with the ipod had a simple explanation: The ipod's hard drive is faulty, as reported by its own diagnostics. (It just happened to coincide with me moving to dapper). I would suggest that anyone still having problems without EFI support in their kernel try to run diagnostics on their ipod to eliminate that as a possibility. http://www.methodshop.com/mp3/ipodsupport/diagnosticmode/ -- Ipods react badly to checks for EFI partition tables https://launchpad.net/bugs/37163 From stappers at stappers.nl Wed Jul 19 13:36:37 2006 From: stappers at stappers.nl (Geert Stappers) Date: Wed, 19 Jul 2006 13:36:37 -0000 Subject: [Bug 53015] Re: can't find /dev/hda1 References: <20060714194132.12867.24947.malonedeb@gandwana.ubuntu.com> Message-ID: <20060719133637.32445.79920.malone@gandwana.ubuntu.com> And why did the upgrade not pull in 'udev'? BTW, the computer use now 2.6.10-something. (still not 2.6.15-25) Something else: please reopen this bugreport. -- can't find /dev/hda1 https://launchpad.net/bugs/53015 From chaosgeisterchen at gmail.com Wed Jul 19 13:47:46 2006 From: chaosgeisterchen at gmail.com (chaosgeisterchen) Date: Wed, 19 Jul 2006 13:47:46 -0000 Subject: [Bug 45162] Re: [Bug 45162] Re: Wrong acx111 PCI default firmware for DWL-G520+ References: <20060517020232.15142.83410.malonedeb@gandwana.ubuntu.com> <20060719064419.5833.52455.malone@gandwana.ubuntu.com> Message-ID: <200607191547.46309.chaosgeisterchen@gmail.com> Hi there! thanks, but it works like a charm after a mere line: sudo cp /lib/firmware/$(uname -r)/acx/1.2.1.34/* /lib/firmware/$(uname -r)/acx/default Well.. one has to repeat that after every kernel patch. Using 2.6.15-26-k7 now. No problems :) best regards Simon Am Mittwoch, 19. Juli 2006 08:44 schrieb lcn: > Hi, > > My wi-fi connection works. > I use Ubuntu 6.06. > Linux 2.6.15-25-386. > Wi-fi PCI card D-Link DWL-G520+, H/W Ver. A3, F/W Ver. 1.0.11. > > How to do. > The firmware tiacx111c16 in directories 1.2.0.30 and 1.2.1.34 work. But not > the one in 2.3.1.31. > > cd /lib/firmware/2.6.15-23-386/acx/default > rm tiacx111c16 > > ln -s ../1.2.0.30/tiacx111c16 tiacx111c16 > or > ln -s ../1.2.1.34/tiacx111c16 tiacx111c16 > > Nota : Seems working from channel 1 (2412 MHz) to channel 13 (2472 MHz). > Didn't test with channel 14 (2484 MHz). > > I attached file from lspci -vv, lspci -vvn, lsusb. -- Wrong acx111 PCI default firmware for DWL-G520+ https://launchpad.net/bugs/45162 From cjhandrew at gmail.com Wed Jul 19 14:42:28 2006 From: cjhandrew at gmail.com (chris_andrew) Date: Wed, 19 Jul 2006 14:42:28 -0000 Subject: [Bug 40119] Re: SPARC boot failed: Illegal Instruction References: <20060419084429.8468.45532.malonedeb@gandwana.ubuntu.com> Message-ID: <20060719144228.32445.15759.malone@gandwana.ubuntu.com> Hi, I have the same problem on an Ultra 10. I have been unable to install any distro based on the 2.6 kernel. It always fails at "Booting Linux....." I note from above that an Edgy version of Ubuntu may be available, I will check this out. I can install Sarge, Aurora, Gentoo, but not Etch or Dapper. I do not have a PC that I can try a network install from. Let me know if I can be of any help. Cheers, Chris. -- SPARC boot failed: Illegal Instruction https://launchpad.net/bugs/40119 From yannick.torres at keliglia.com Wed Jul 19 14:58:08 2006 From: yannick.torres at keliglia.com (yannick) Date: Wed, 19 Jul 2006 14:58:08 -0000 Subject: [Bug 49439] Re: No sound on Toshiba Satellite p100-114 with intel-hda chipset References: <20060612081247.25765.80831.malonedeb@gangotri.ubuntu.com> Message-ID: <20060719145808.32401.13755.malone@gandwana.ubuntu.com> I have found a solution for the sound. If you pass acpi=off in Grub, sound is Ok with Alsa 1.0.11. I'm happy to heard music with this very good laptop ! (ACPI for a laptop is essentiel but for me, not vital) Anyway, if you want to watch evolution of Alsa's bug, it's here : https://bugtrack.alsa-project.org/alsa-bug/view.php?id=2174 =>Yann : Perhaps it a good solution to contact Conexant directly ? it is possible ? Have you tried to use the remote control for play / pause / etc.. ? I can't find a solution for that actually... Perhaps it's a good idea to write a page for this laptop on Ubuntu's wiki to share our experiment ? PS : sorry for my bad english, i'm a french's breton :)) -- No sound on Toshiba Satellite p100-114 with intel-hda chipset https://launchpad.net/bugs/49439 From joachim.beckers at belgacom.net Wed Jul 19 15:02:39 2006 From: joachim.beckers at belgacom.net (Joachim Beckers) Date: Wed, 19 Jul 2006 15:02:39 -0000 Subject: [Bug 37163] Re: Ipods react badly to checks for EFI partition tables References: <20060329132453.6279.44854.malonedeb@gandwana.ubuntu.com> Message-ID: <20060719150239.23514.22977.malone@gangotri.ubuntu.com> Mine (40GB 4th gen B/W) passed all tests. Still the same problems though. Besides, there's other devices that experience the same problems. Please check again when your iPod's back from repair. -- Ipods react badly to checks for EFI partition tables https://launchpad.net/bugs/37163 From karl.tilbury at canonical.com Wed Jul 19 15:14:25 2006 From: karl.tilbury at canonical.com (Karl Tilbury) Date: Wed, 19 Jul 2006 15:14:25 -0000 Subject: [Bug 53454] Sunfire V210 crashed References: <20060719151426.23561.20698.malonedeb@gangotri.ubuntu.com> Message-ID: <20060719151426.23561.20698.malonedeb@gangotri.ubuntu.com> Public bug reported: Our Sunfire V210 crashed, this is the first time this V210 has crashed for a number of months. I have a copy of the console messages to assist with discovering the fault. More information is attached. ** Affects: linux-source-2.6.15 (Ubuntu) Importance: Untriaged Status: Unconfirmed -- Sunfire V210 crashed https://launchpad.net/bugs/53454 From karl.tilbury at canonical.com Wed Jul 19 15:15:57 2006 From: karl.tilbury at canonical.com (Karl Tilbury) Date: Wed, 19 Jul 2006 15:15:57 -0000 Subject: [Bug 53454] Re: Sunfire V210 crashed References: <20060719151426.23561.20698.malonedeb@gangotri.ubuntu.com> Message-ID: <20060719151558.23561.30774.malone@gangotri.ubuntu.com> prtconf -v -p output -- Sunfire V210 crashed https://launchpad.net/bugs/53454 From karl.tilbury at canonical.com Wed Jul 19 15:18:35 2006 From: karl.tilbury at canonical.com (Karl Tilbury) Date: Wed, 19 Jul 2006 15:18:35 -0000 Subject: [Bug 53454] Re: Sunfire V210 crashed References: <20060719151426.23561.20698.malonedeb@gangotri.ubuntu.com> Message-ID: <20060719151835.32401.19876.malone@gandwana.ubuntu.com> Console messages -- Sunfire V210 crashed https://launchpad.net/bugs/53454 From ben.collins at ubuntu.com Wed Jul 19 16:06:46 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Wed, 19 Jul 2006 16:06:46 -0000 Subject: [Bug 30557] Re: cpu idle time in /proc/stat wrong References: <20060205141542.11709.55517.malonedeb@gandwana.ubuntu.com> Message-ID: <20060719160646.23561.94485.malone@gangotri.ubuntu.com> Thanks. Patches applied for next dapper update. ** Changed in: linux-source-2.6.15 (Ubuntu) Assignee: (unassigned) => Ben Collins Status: Confirmed => Fix Committed -- cpu idle time in /proc/stat wrong https://launchpad.net/bugs/30557 From ben.collins at ubuntu.com Wed Jul 19 16:32:50 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Wed, 19 Jul 2006 16:32:50 -0000 Subject: [Bug 38191] Re: Anydata CDMA modem driver not working References: <20060405134413.25542.96344.malonedeb@gangotri.ubuntu.com> Message-ID: <20060719163251.32401.49708.malone@gandwana.ubuntu.com> Patch applied for next dapper update. ** Changed in: linux-meta (Ubuntu) Sourcepackagename: linux-meta => linux-source-2.6.15 Assignee: (unassigned) => Ben Collins Status: Unconfirmed => Fix Committed -- Anydata CDMA modem driver not working https://launchpad.net/bugs/38191 From ben.collins at ubuntu.com Wed Jul 19 16:37:27 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Wed, 19 Jul 2006 16:37:27 -0000 Subject: [Bug 44173] Re: Dapper Flight 7 didn't find any if my PCI cards References: <20060511085135.21520.51591.malonedeb@gandwana.ubuntu.com> Message-ID: <20060719163728.32445.60742.malone@gandwana.ubuntu.com> Is that lspci output from breezy or dapper? What would be more interesting is a dmesg output from dapper, specifically from the dapper final (including kernel updates). -- Dapper Flight 7 didn't find any if my PCI cards https://launchpad.net/bugs/44173 From ben.collins at ubuntu.com Wed Jul 19 16:41:45 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Wed, 19 Jul 2006 16:41:45 -0000 Subject: [Bug 45162] Re: [Bug 45162] Re: Wrong acx111 PCI default firmware for DWL-G520+ References: <20060517020232.15142.83410.malonedeb@gandwana.ubuntu.com> <20060719064419.5833.52455.malone@gandwana.ubuntu.com> Message-ID: <1153327305.5009.9.camel@grayson> > I attached file from lspci -vv, lspci -vvn, lsusb. Please attach using the web interface. Attaching to email does not work. Also, please read the readme.txt everyone. I've said this in every bug report about acx firmware (including this one). I've explained how to properly work around this on your systems (using the modprobe.d/ option file) and how to report the bug properly to me so that I can make the use of the proper version hardcoded into the driver. Follow these steps, and we will fix things. Ignore these steps, and you'll be stumbling around making odd (possibly breaking) changes to your system, manually, forever. -- Wrong acx111 PCI default firmware for DWL-G520+ https://launchpad.net/bugs/45162 From ben.collins at ubuntu.com Wed Jul 19 16:55:43 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Wed, 19 Jul 2006 16:55:43 -0000 Subject: [Bug 53078] Re: Linux Kernel 2.6.15-26-386 gives an 'crc' error at boot-up References: <20060715183355.1931.17897.malonedeb@gangotri.ubuntu.com> Message-ID: <20060719165543.23514.46934.malone@gangotri.ubuntu.com> Basically you need to install the linux-386 package to make sure upgrades work. sudo apt-get install linux-386 The main package you are looking for is linux-restricted-modules-386 and it's dependencies. ** Changed in: linux-source-2.6.15 (Ubuntu) Assignee: (unassigned) => Ben Collins Status: Unconfirmed => Fix Released -- Linux Kernel 2.6.15-26-386 gives an 'crc' error at boot-up https://launchpad.net/bugs/53078 From holyparmesan at gmail.com Wed Jul 19 17:31:39 2006 From: holyparmesan at gmail.com (Shortgeek) Date: Wed, 19 Jul 2006 17:31:39 -0000 Subject: [Bug 53208] Re: [EGDY] Regression from 2.6.17-2 to 2.6.17-5 References: <20060717050555.2126.12285.malonedeb@gandwana.ubuntu.com> Message-ID: <20060719173139.23514.56284.malone@gangotri.ubuntu.com> Confirmed. I have a EIDE/PATA hard drive, and every time I try to upgrade to 2.6.17-5, it won't boot, saying "error: /dev/hda3 does not exist". GRUB can find it fine. I have a Dell Dimension 1100, and haven't changed anything internally. -- [EGDY] Regression from 2.6.17-2 to 2.6.17-5 https://launchpad.net/bugs/53208 From gnomefreak at gmail.com Wed Jul 19 17:54:12 2006 From: gnomefreak at gmail.com (John Vivirito) Date: Wed, 19 Jul 2006 17:54:12 -0000 Subject: [Bug 52416] Re: Kernel panic on startup References: <20060709101808.27312.14390.malonedeb@gangotri.ubuntu.com> Message-ID: <20060719175412.23514.58803.launchpad@gangotri.ubuntu.com> ** Changed in: kernel-package (Ubuntu) Status: In Progress => Fix Released -- Kernel panic on startup https://launchpad.net/bugs/52416 From sorosj at gmail.com Wed Jul 19 19:16:11 2006 From: sorosj at gmail.com (J) Date: Wed, 19 Jul 2006 19:16:11 -0000 Subject: [Bug 16163] Re: Missing power events on nondescript Sony laptop? References: <20060113134505.21012.24613.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060719191611.23514.33221.malone@gangotri.ubuntu.com> well, I got a smartbattery, and I tried with acpi_sbs and wth fixed DSDT and with ec_burst=*, but I just can not get the ac -> battery -> ac events on my acer tm4001lmi. I do a cat /proc/acpi/events, but there are no events at all. I also know that it shoud be working, because it worked before both with acpi_sbs and with a custom DSDT loaded by initrd; though I stuck with the latter, because I got a lot of missed keypresses and random keyboard repeats with acpi_sbs. I think also that the load DSDT from initrd patch in ubuntu kernels is broken, because I doooot get battery read with custom DSDT. -- Missing power events on nondescript Sony laptop? https://launchpad.net/bugs/16163 From sorosj at gmail.com Wed Jul 19 19:39:48 2006 From: sorosj at gmail.com (J) Date: Wed, 19 Jul 2006 19:39:48 -0000 Subject: [Bug 16163] Re: Missing power events on nondescript Sony laptop? References: <20060113134505.21012.24613.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060719193948.32445.42594.malone@gandwana.ubuntu.com> sorry; my bad...did not realise this was about sony laptops. My bug persists in acpi_sbs, though about initrd patch is not true, i just did not know I hat to compress the DSDT into an initrd... -- Missing power events on nondescript Sony laptop? https://launchpad.net/bugs/16163 From th.haberland at hawkeye.net Wed Jul 19 20:12:03 2006 From: th.haberland at hawkeye.net (Thomas Haberland) Date: Wed, 19 Jul 2006 20:12:03 -0000 Subject: [Bug 53475] Incompatible libdevmapper 1.01.03 and kernel driver References: <20060719201203.32401.27122.malonedeb@gandwana.ubuntu.com> Message-ID: <20060719201203.32401.27122.malonedeb@gandwana.ubuntu.com> Public bug reported: Binary package hint: linux-image-2.6.12-10-686-smp System: Kubuntu 5.10 Since the kernel update linux-image-2.6.12-10-686-smp (2.6.12-10.35) a few days ago cryptdisks doesn't work anymore. Lauching the cryptdisks service into a konsole produces this error message: /etc/init.d/cryptdisks start /proc/misc: No entry for device-mapper found Is device-mapper driver missing from kernel? Failure to communicate with kernel device-mapper driver. /proc/misc: No entry for device-mapper found Is device-mapper driver missing from kernel? Failure to communicate with kernel device-mapper driver. Incompatible libdevmapper 1.01.03 (2005-06-13)(compat) and kernel driver Command failed Same error happens using the non SMP kernel environment. Also the last update to linux-image-2.6.12-10.36 doesn't solve this problem. All available updates are installed. ** Affects: linux-source-2.6.12 (Ubuntu) Importance: Untriaged Status: Unconfirmed -- Incompatible libdevmapper 1.01.03 and kernel driver https://launchpad.net/bugs/53475 From ben.collins at ubuntu.com Wed Jul 19 21:06:10 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Wed, 19 Jul 2006 21:06:10 -0000 Subject: [Bug 53475] Re: [Bug 53475] Incompatible libdevmapper 1.01.03 and kernel driver References: <20060719201203.32401.27122.malonedeb@gandwana.ubuntu.com> Message-ID: <1153343170.5009.30.camel@grayson> On Wed, 2006-07-19 at 20:12 +0000, Thomas Haberland wrote: > /proc/misc: No entry for device-mapper found > Is device-mapper driver missing from kernel? > Failure to communicate with kernel device-mapper driver. > /proc/misc: No entry for device-mapper found > Is device-mapper driver missing from kernel? > Failure to communicate with kernel device-mapper driver. > Incompatible libdevmapper 1.01.03 (2005-06-13)(compat) and kernel driver > Command failed Did you check if the dm module is loaded? -- Incompatible libdevmapper 1.01.03 and kernel driver https://launchpad.net/bugs/53475 From emschwar at ericschwartz.us Wed Jul 19 22:37:28 2006 From: emschwar at ericschwartz.us (Eric Schwartz) Date: Wed, 19 Jul 2006 22:37:28 -0000 Subject: [Bug 51465] Re: ACPI suspend/hibernate doesn't work anymore References: <20060630210004.17054.3414.malonedeb@gangotri.ubuntu.com> Message-ID: <20060719223728.23561.26740.malone@gangotri.ubuntu.com> I have upgraded to ii linux-image-2.6.15-26-686 2.6.15-26.45 Linux kernel image for version 2.6.15 on PPro/Ce And still see the problem. -- ACPI suspend/hibernate doesn't work anymore https://launchpad.net/bugs/51465 From usdanskys at rocketmail.com Thu Jul 20 01:52:21 2006 From: usdanskys at rocketmail.com (Steven Usdansky) Date: Thu, 20 Jul 2006 01:52:21 -0000 Subject: [Bug 34902] Re: Ralink Wireless USB/PCMCIA/PCI hangs PC References: <20060314143545.30082.52680.malonedeb@gandwana.ubuntu.com> Message-ID: <20060720015221.23514.84555.malone@gangotri.ubuntu.com> added irqpoll to the kernel /vmlinuz ... line and my Averatec 3250 now works with kernel 2.6.15-23-386. Thanks tz -- Ralink Wireless USB/PCMCIA/PCI hangs PC https://launchpad.net/bugs/34902 From mattdill at alumni.rice.edu Thu Jul 20 02:24:00 2006 From: mattdill at alumni.rice.edu (MDill) Date: Thu, 20 Jul 2006 02:24:00 -0000 Subject: [Bug 53489] madwifi-ng driver References: <20060720022400.32401.46225.malonedeb@gandwana.ubuntu.com> Message-ID: <20060720022400.32401.46225.malonedeb@gandwana.ubuntu.com> Public bug reported: Binary package hint: linux-restricted-modules-2.6-686 in order to make use of the madwifi-ng driver (new_ath_pci), the wlanconfig utility is required, but it does not seem to be included. The Debian package madwifi-tools contains this utility (and others), but I can find no (k)ubuntu equivalent. ** Affects: linux-meta (Ubuntu) Importance: Untriaged Status: Unconfirmed -- madwifi-ng driver https://launchpad.net/bugs/53489 From yogich at sc2000.net Thu Jul 20 02:48:07 2006 From: yogich at sc2000.net (CH) Date: Thu, 20 Jul 2006 02:48:07 -0000 Subject: [Bug 53492] Booting w/new kernel impossible References: <20060720024807.23514.94942.malonedeb@gangotri.ubuntu.com> Message-ID: <20060720024807.23514.94942.malonedeb@gangotri.ubuntu.com> Public bug reported: Binary package hint: linux-image-2.6-386 Latest update for linux-image-2.6-386, installed 060718, loks up the box rather than booting. It barely gets the parameters before doing so. Frame buffering never happens. This has happened three consecutive attempts. Prior kernel boots w/o incident. ** Affects: linux-meta (Ubuntu) Importance: Untriaged Status: Unconfirmed -- Booting w/new kernel impossible https://launchpad.net/bugs/53492 From yogich at sc2000.net Thu Jul 20 02:49:17 2006 From: yogich at sc2000.net (CH) Date: Thu, 20 Jul 2006 02:49:17 -0000 Subject: [Bug 53492] Re: Booting w/new kernel impossible References: <20060720024807.23514.94942.malonedeb@gangotri.ubuntu.com> Message-ID: <20060720024917.32401.93300.malone@gandwana.ubuntu.com> I only booted the new kernel, today. Been using the prior one up until today. -- Booting w/new kernel impossible https://launchpad.net/bugs/53492 From sohail at taggedtype.net Thu Jul 20 02:56:27 2006 From: sohail at taggedtype.net (sohail) Date: Thu, 20 Jul 2006 02:56:27 -0000 Subject: [Bug 30557] Re: [Bug 30557] Re: cpu idle time in /proc/stat wrong References: <20060205141542.11709.55517.malonedeb@gandwana.ubuntu.com> <20060719160646.23561.94485.malone@gangotri.ubuntu.com> Message-ID: <1153364187.5286.4.camel@localhost.localdomain> Is this supposed to be fixed for 2.6.15-26-686? Because it still isn't fixed for me (top reports ~80% CPU usage with max_cstate set to 3) On Wed, 2006-07-19 at 16:06 +0000, Ben Collins wrote: > Thanks. Patches applied for next dapper update. > > ** Changed in: linux-source-2.6.15 (Ubuntu) > Assignee: (unassigned) => Ben Collins > Status: Confirmed => Fix Committed > -- cpu idle time in /proc/stat wrong https://launchpad.net/bugs/30557 From ben.collins at ubuntu.com Thu Jul 20 03:25:08 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Thu, 20 Jul 2006 03:25:08 -0000 Subject: [Bug 30557] Re: [Bug 30557] Re: [Bug 30557] Re: cpu idle time in /proc/stat wrong References: <20060205141542.11709.55517.malonedeb@gandwana.ubuntu.com> <20060719160646.23561.94485.malone@gangotri.ubuntu.com> <1153364187.5286.4.camel@localhost.localdomain> Message-ID: <1153365908.5057.19.camel@grayson> On Thu, 2006-07-20 at 02:56 +0000, sohail wrote: > Is this supposed to be fixed for 2.6.15-26-686? Because it still isn't > fixed for me (top reports ~80% CPU usage with max_cstate set to 3) "Fix committed" means it's in our source repo. When it's marked "Fix released", then it will mean it's uploaded and available. -- cpu idle time in /proc/stat wrong https://launchpad.net/bugs/30557 From jcinacio at gmail.com Thu Jul 20 04:54:00 2006 From: jcinacio at gmail.com (jcinacio) Date: Thu, 20 Jul 2006 04:54:00 -0000 Subject: [Bug 49042] Re: nic 3c900B not working References: <20060608194207.22460.74412.malonedeb@gangotri.ubuntu.com> Message-ID: <20060720045400.23514.72484.malone@gangotri.ubuntu.com> Same here, 3com nic with 3c900 chipset and 2.6.15-26-amd64-k8 kernel. output of lspci: 0000:00:0e.0 Ethernet controller: 3Com Corporation 3c900 10BaseT [Boomerang] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- GSI 19 (level, low) -> IRQ 209 [ 1696.040036] eth1: first available media type: 10baseT [ 1696.040119] eth1: Initial media type 10baseT. [ 1696.040196] eth1: vortex_up() InternalConfig 010302d8. [ 1696.040282] eth1: vortex_up() irq 209 media status 88c0. [ 1696.041511] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 1697.438038] eth1: Media selection timer tick happened, 10baseT. [ 1697.438042] dev->watchdog_timeo=1250 [ 1697.438058] eth1: Media 10baseT has no link beat, 80c0. [ 1697.438060] eth1: Media selection failing, using default 10baseT port. [ 1697.438065] wrote 0x010302d8 to Wn3_Config [ 1697.438073] eth1: Media selection timer finished, 10baseT. -- nic 3c900B not working https://launchpad.net/bugs/49042 From sohail at taggedtype.net Thu Jul 20 04:52:46 2006 From: sohail at taggedtype.net (sohail) Date: Thu, 20 Jul 2006 04:52:46 -0000 Subject: [Bug 30557] Re: [Bug 30557] Re: [Bug 30557] Re: [Bug 30557] Re: cpu idle time in /proc/stat wrong References: <20060205141542.11709.55517.malonedeb@gandwana.ubuntu.com> <20060719160646.23561.94485.malone@gangotri.ubuntu.com> <1153364187.5286.4.camel@localhost.localdomain> <1153365908.5057.19.camel@grayson> Message-ID: <1153371166.5170.0.camel@localhost.localdomain> Ah. I picked up a kernel update last night that was the version below so I thought it might have been that. Thanks! On Thu, 2006-07-20 at 03:25 +0000, Ben Collins wrote: > On Thu, 2006-07-20 at 02:56 +0000, sohail wrote: > > Is this supposed to be fixed for 2.6.15-26-686? Because it still isn't > > fixed for me (top reports ~80% CPU usage with max_cstate set to 3) > > > "Fix committed" means it's in our source repo. When it's marked "Fix > released", then it will mean it's uploaded and available. > -- cpu idle time in /proc/stat wrong https://launchpad.net/bugs/30557 From ben.collins at ubuntu.com Thu Jul 20 05:26:52 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Thu, 20 Jul 2006 05:26:52 -0000 Subject: [Bug 53492] Re: Booting w/new kernel impossible References: <20060720024807.23514.94942.malonedeb@gangotri.ubuntu.com> Message-ID: <20060720052652.32401.73312.malone@gandwana.ubuntu.com> Please get correct version information with this command: dpkg -l | grep linux-image-2.6 Paste output from this command. ** Changed in: linux-meta (Ubuntu) Status: Unconfirmed => Needs Info -- Booting w/new kernel impossible https://launchpad.net/bugs/53492 From davidf at sjsoft.com Thu Jul 20 07:51:55 2006 From: davidf at sjsoft.com (David Fraser) Date: Thu, 20 Jul 2006 07:51:55 -0000 Subject: [Bug 34172] Re: LiveCD: boot progress feedback (is it booting or is it hung up?) References: <20060309020707.28582.32937.malonedeb@gandwana.ubuntu.com> Message-ID: <20060720075155.32401.74715.malone@gandwana.ubuntu.com> Had a similar error to above using ubuntu 6.0.6 desktop i386 install, with Samsung DVD/RW Note that in my case the device name is correct and consistent (hdb) The logical block given for the error is 357298 (then later 357297/6) - but the iso image only has 357297 blocks (as confirmed by the iso header) - and have checked the md5sum of the downloaded image So it seems like this has to do with trying to read past the end of the disk and the failure been really slow ... after leaving it for about 5-10 minutes it seems to mount the loopback filesystem OK -- LiveCD: boot progress feedback (is it booting or is it hung up?) https://launchpad.net/bugs/34172 From felix.rommel at web.de Thu Jul 20 07:54:07 2006 From: felix.rommel at web.de (felix.rommel) Date: Thu, 20 Jul 2006 07:54:07 -0000 Subject: [Bug 53068] Re: After Kernel update (2.6.15-26-k7) external USB drive isn't recognized References: <20060715164307.1931.66026.malonedeb@gangotri.ubuntu.com> Message-ID: <20060720075407.23514.74066.malone@gangotri.ubuntu.com> -- After Kernel update (2.6.15-26-k7) external USB drive isn't recognized https://launchpad.net/bugs/53068 From felix.rommel at web.de Thu Jul 20 07:56:07 2006 From: felix.rommel at web.de (felix.rommel) Date: Thu, 20 Jul 2006 07:56:07 -0000 Subject: [Bug 53068] Re: After Kernel update (2.6.15-26-k7) external USB drive isn't recognized References: <20060715164307.1931.66026.malonedeb@gangotri.ubuntu.com> Message-ID: <20060720075607.23561.58285.malone@gangotri.ubuntu.com> -- After Kernel update (2.6.15-26-k7) external USB drive isn't recognized https://launchpad.net/bugs/53068 From felix.rommel at web.de Thu Jul 20 07:58:49 2006 From: felix.rommel at web.de (felix.rommel) Date: Thu, 20 Jul 2006 07:58:49 -0000 Subject: [Bug 53068] Re: After Kernel update (2.6.15-26-k7) external USB drive isn't recognized References: <20060715164307.1931.66026.malonedeb@gangotri.ubuntu.com> Message-ID: <20060720075849.23561.68708.malone@gangotri.ubuntu.com> The problems still exist with the latest Update 2.6.15-26.45... -- After Kernel update (2.6.15-26-k7) external USB drive isn't recognized https://launchpad.net/bugs/53068 From felix.rommel at web.de Thu Jul 20 07:56:56 2006 From: felix.rommel at web.de (felix.rommel) Date: Thu, 20 Jul 2006 07:56:56 -0000 Subject: [Bug 53068] Re: After Kernel update (2.6.15-26-k7) external USB drive isn't recognized References: <20060715164307.1931.66026.malonedeb@gangotri.ubuntu.com> Message-ID: <20060720075656.23514.12764.malone@gangotri.ubuntu.com> -- After Kernel update (2.6.15-26-k7) external USB drive isn't recognized https://launchpad.net/bugs/53068 From felix.rommel at web.de Thu Jul 20 07:57:34 2006 From: felix.rommel at web.de (felix.rommel) Date: Thu, 20 Jul 2006 07:57:34 -0000 Subject: [Bug 53068] Re: After Kernel update (2.6.15-26-k7) external USB drive isn't recognized References: <20060715164307.1931.66026.malonedeb@gangotri.ubuntu.com> Message-ID: <20060720075734.23514.36882.malone@gangotri.ubuntu.com> -- After Kernel update (2.6.15-26-k7) external USB drive isn't recognized https://launchpad.net/bugs/53068 From ondrej at sury.org Thu Jul 20 11:28:52 2006 From: ondrej at sury.org (=?utf-8?b?T25kxZllaiBTdXLDvQ==?=) Date: Thu, 20 Jul 2006 11:28:52 -0000 Subject: [Bug 52546] Re: original HP keybord bundled with HP dc7600 doesn't work References: <20060710151635.27257.37195.malonedeb@gangotri.ubuntu.com> Message-ID: <20060720112852.32445.19895.malone@gandwana.ubuntu.com> Just tried Ubuntu 6.06 LTS Live CD (both i386 and amd64) and keyboard doesn't work after booting linux kernel (it does work when CD boots first menu, where you can choose Run or Install or Memory test, etc.). Ondrej. -- original HP keybord bundled with HP dc7600 doesn't work https://launchpad.net/bugs/52546 From jyrki.pulliainen at gmail.com Thu Jul 20 13:04:34 2006 From: jyrki.pulliainen at gmail.com (J. Pulliainen) Date: Thu, 20 Jul 2006 13:04:34 -0000 Subject: [Bug 50031] Re: [regression] Suspend [to-RAM and to-disk] is broken in 2.6.15-25.43 References: <20060616182146.13137.51951.malonedeb@gandwana.ubuntu.com> Message-ID: <20060720130434.32445.23157.malone@gandwana.ubuntu.com> I'm having similiar problems with my Asus V6J too. I'll try to get you the logs as soon as possible. As a side note, no hsfmodem is installed. -- [regression] Suspend [to-RAM and to-disk] is broken in 2.6.15-25.43 https://launchpad.net/bugs/50031 From jyrki.pulliainen at gmail.com Thu Jul 20 13:21:03 2006 From: jyrki.pulliainen at gmail.com (J. Pulliainen) Date: Thu, 20 Jul 2006 13:21:03 -0000 Subject: [Bug 50031] Re: [regression] Suspend [to-RAM and to-disk] is broken in 2.6.15-25.43 References: <20060616182146.13137.51951.malonedeb@gandwana.ubuntu.com> Message-ID: <20060720132103.32401.52640.malone@gandwana.ubuntu.com> Here are the relevant parts of my acpid. Neither do syslog or dmesg have anything even error-like in them. [Tue Jul 18 09:00:23 2006] received event "button/sleep SLPB 00000080 00000002" [Tue Jul 18 09:00:23 2006] notifying client 4708[108:108] [Tue Jul 18 09:00:23 2006] executing action "/etc/acpi/sleep.sh" [Tue Jul 18 09:00:23 2006] BEGIN HANDLER MESSAGES ifdown: interface eth1 not configured Stopping MySQL database server: mysqld^G/usr/bin/mysqladmin: connect to server at 'localhost' failed error: 'Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (2)' Check that mysqld is running and that the socket: '/var/run/mysqld/mysqld.sock' exists! . /etc/acpi/suspend.d/80-video-vesa-state.sh: line 11: 6329 Trace/breakpoint trap vbetool vbemode set 3 Allocated buffer at 0x11010 (base is 0x0) ES: 0x1101 EBX: 0x0000 * Shutting down ALSA... ESC[80G ^MESC[74G[ ok ] /etc/acpi/resume.d/17-video-restore.sh: line 9: 6495 Trace/breakpoint trap vbetool vbestate restore <$VBESTATE /etc/acpi/resume.d/17-video-restore.sh: line 9: 6496 Trace/breakpoint trap vbetool vbemode set $VBEMODE Ignoring unknown interface eth1=eth1. * Setting up ALSA... ESC[80G ^MESC[74G[ ok ] Starting MySQL database server: mysqld. [Tue Jul 18 09:02:00 2006] END HANDLER MESSAGES [Tue Jul 18 09:02:00 2006] action exited with status 0 [Tue Jul 18 09:02:00 2006] completed event "button/sleep SLPB 00000080 00000002" -- [regression] Suspend [to-RAM and to-disk] is broken in 2.6.15-25.43 https://launchpad.net/bugs/50031 From pmjdebruijn at gmail.com Thu Jul 20 13:25:23 2006 From: pmjdebruijn at gmail.com (Pascal de Bruijn) Date: Thu, 20 Jul 2006 13:25:23 -0000 Subject: [Bug 53522] Disk Scheduler Algorithm References: <20060720132523.32445.35735.malonedeb@gandwana.ubuntu.com> Message-ID: <20060720132523.32445.35735.malonedeb@gandwana.ubuntu.com> Public bug reported: I noticed that Ubuntu still uses the Anticipatory disk scheduler by default: pmjdebruijn at agamemnon:~$ cat /sys/block/hda/queue/scheduler noop [anticipatory] deadline cfq pmjdebruijn at agamemnon:~$ Considering that (if I'm not mistaken) both RedHat and SuSE use CFQ by default, shouldn't Ubuntu use CFQ too? When one looks at the algorithm, it's obvious it could improve desktop interactivity. I also did some bonnie benchmarks a while back which also indicated that cfq and deadline perform the best. ** Affects: linux-source-2.6.15 (Ubuntu) Importance: Untriaged Status: Unconfirmed -- Disk Scheduler Algorithm https://launchpad.net/bugs/53522 From yogich at sc2000.net Thu Jul 20 13:31:38 2006 From: yogich at sc2000.net (CH) Date: Thu, 20 Jul 2006 13:31:38 -0000 Subject: [Bug 53492] Re: [Bug 53492] Re: Booting w/new kernel impossible References: <20060720024807.23514.94942.malonedeb@gangotri.ubuntu.com> <20060720052652.32401.73312.malone@gandwana.ubuntu.com> Message-ID: <200607200831.41212.yogich@sc2000.net> On Thursday 20 July 2006 00:26, Ben Collins wrote: > dpkg -l | grep linux-image-2.6 Command output: yogi at flight6:~$ sudo dpkg -l | grep linux-image-2.6 Password: rc linux-image-2.6.15-18-386 2.6.15-18.27 Linux kernel image for version 2.6.15 on 386 rc linux-image-2.6.15-19-386 2.6.15-19.29 Linux kernel image for version 2.6.15 on 386 rc linux-image-2.6.15-20-386 2.6.15-20.30 Linux kernel image for version 2.6.15 on 386 rc linux-image-2.6.15-21-386 2.6.15-21.32 Linux kernel image for version 2.6.15 on 386 rc linux-image-2.6.15-22-386 2.6.15-22.34 Linux kernel image for version 2.6.15 on 386 ii linux-image-2.6.15-23-386 2.6.15-23.39 Linux kernel image for version 2.6.15 on 386 rc linux-image-2.6.15-25-386 2.6.15-25.43 Linux kernel image for version 2.6.15 on 386 ii linux-image-2.6.15-26-386 2.6.15-26.45 Linux kernel image for version 2.6.15 on 386 yogi at flight6:~$ -- ...CH -- Booting w/new kernel impossible https://launchpad.net/bugs/53492 From rui.castro at gmail.com Thu Jul 20 14:12:34 2006 From: rui.castro at gmail.com (Rui Castro) Date: Thu, 20 Jul 2006 14:12:34 -0000 Subject: [Bug 53524] DMA access to CD-writer hangs IDE bus References: <20060720141234.11169.84794.malonedeb@gandwana.ubuntu.com> Message-ID: <20060720141234.11169.84794.malonedeb@gandwana.ubuntu.com> Public bug reported: I'm having a problem burning CD-R and CD-RW. Everytime i try to burn a CD-R ou CD-RW or erase a CD-RW the process stalls and i get "hdd: lost interrupt" in the messages log. After that i have to reboot to be able to use de drive. This is a bug already reported in the kernel bug tracker http://bugzilla.kernel.org/show_bug.cgi?id=5786 For what i understood from the that page the bug is already fixed in kernel 2.6.16.10. Is it possible to include this as a patch to the dapper kernel? That would be really nice because right now i cannot burn dapper install cds to my friends :) So, if you corrected this you would be helping with bug #1 ;) ** Affects: linux-source-2.6.15 (Ubuntu) Importance: Untriaged Status: Unconfirmed -- DMA access to CD-writer hangs IDE bus https://launchpad.net/bugs/53524 From l.bigonville at edpnet.be Thu Jul 20 15:11:03 2006 From: l.bigonville at edpnet.be (Laurent Bigonville) Date: Thu, 20 Jul 2006 15:11:03 -0000 Subject: [Bug 53522] Re: Disk Scheduler Algorithm References: <20060720132523.32445.35735.malonedeb@gandwana.ubuntu.com> Message-ID: <20060720151103.22384.31337.malone@gangotri.ubuntu.com> CFQ seems to be now the default in edgy (with kernel 2.6.17-5.14) cat /sys/block/hda/queue/scheduler noop anticipatory deadline [cfq] -- Disk Scheduler Algorithm https://launchpad.net/bugs/53522 From pmjdebruijn at gmail.com Thu Jul 20 15:18:10 2006 From: pmjdebruijn at gmail.com (Pascal de Bruijn) Date: Thu, 20 Jul 2006 15:18:10 -0000 Subject: [Bug 53533] Compile error with ACPI off References: <20060720151810.11169.18487.malonedeb@gandwana.ubuntu.com> Message-ID: <20060720151810.11169.18487.malonedeb@gandwana.ubuntu.com> Public bug reported: While compiling a minimal kernel without ACPI, I got the following error: LD arch/i386/lib/built-in.o CC arch/i386/lib/bitops.o AS arch/i386/lib/checksum.o CC arch/i386/lib/delay.o AS arch/i386/lib/getuser.o CC arch/i386/lib/memcpy.o AS arch/i386/lib/putuser.o CC arch/i386/lib/strstr.o CC arch/i386/lib/usercopy.o AR arch/i386/lib/lib.a GEN .version CHK include/linux/compile.h UPD include/linux/compile.h CC init/version.o LD init/built-in.o LD .tmp_vmlinux1 arch/i386/kernel/built-in.o(.init.text+0x13eb): In function `setup_arch': : undefined reference to `check_acpi_pci' make[1]: *** [.tmp_vmlinux1] Error 1 make[1]: Leaving directory `/home/pmjdebruijn/kernel/ubuntu/linux-source-2.6.15-2.6.15' make: *** [stamp-build] Error 2 It seems some Ubuntu specific patch break nonACPI support. ** Affects: linux-source-2.6.15 (Ubuntu) Importance: Untriaged Status: Unconfirmed -- Compile error with ACPI off https://launchpad.net/bugs/53533 From pmjdebruijn at gmail.com Thu Jul 20 15:19:46 2006 From: pmjdebruijn at gmail.com (Pascal de Bruijn) Date: Thu, 20 Jul 2006 15:19:46 -0000 Subject: [Bug 53533] Re: Compile error with ACPI off References: <20060720151810.11169.18487.malonedeb@gandwana.ubuntu.com> Message-ID: <20060720151946.11169.38670.malone@gandwana.ubuntu.com> This should fix the issue. The kernel compiles and boots with the patch. Please consider that I'm not an experienced kernel developer or C programmer. Thanks to bernard_ at irc.freenode.net#ubuntu-kernel! -- Compile error with ACPI off https://launchpad.net/bugs/53533 From pmjdebruijn at gmail.com Thu Jul 20 15:28:12 2006 From: pmjdebruijn at gmail.com (Pascal de Bruijn) Date: Thu, 20 Jul 2006 15:28:12 -0000 Subject: [Bug 53522] Re: Disk Scheduler Algorithm References: <20060720132523.32445.35735.malonedeb@gandwana.ubuntu.com> Message-ID: <20060720152812.22384.13092.malone@gangotri.ubuntu.com> Ok, great. Then this issue can be considered already fixed. -- Disk Scheduler Algorithm https://launchpad.net/bugs/53522 From elhigu at gmail.com Thu Jul 20 15:33:36 2006 From: elhigu at gmail.com (elhigu) Date: Thu, 20 Jul 2006 15:33:36 -0000 Subject: [Bug 44173] Re: [Bug 44173] Re: Dapper Flight 7 didn't find any if my PCI cards References: <20060511085135.21520.51591.malonedeb@gandwana.ubuntu.com> <20060719163728.32445.60742.malone@gandwana.ubuntu.com> Message-ID: <5b2ad9470607200833q3884ae83p1626cca512a560ed@mail.gmail.com> I can't check it anymore, because I'm now working in Mexico for a year and my server is offline in Finland :) I have to check after I get back, with latest ubuntu version if the problem still exists. Mikael Lepistö On 7/19/06, Ben Collins wrote: > > Is that lspci output from breezy or dapper? > > What would be more interesting is a dmesg output from dapper, > specifically from the dapper final (including kernel updates). > > -- > Dapper Flight 7 didn't find any if my PCI cards > https://launchpad.net/bugs/44173 > -- Dapper Flight 7 didn't find any if my PCI cards https://launchpad.net/bugs/44173 From ben.collins at ubuntu.com Thu Jul 20 15:51:34 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Thu, 20 Jul 2006 15:51:34 -0000 Subject: [Bug 53522] Re: Disk Scheduler Algorithm References: <20060720132523.32445.35735.malonedeb@gandwana.ubuntu.com> Message-ID: <20060720155134.11213.16659.launchpad@gandwana.ubuntu.com> ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Unconfirmed => Rejected -- Disk Scheduler Algorithm https://launchpad.net/bugs/53522 From ben.collins at ubuntu.com Thu Jul 20 15:50:49 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Thu, 20 Jul 2006 15:50:49 -0000 Subject: [Bug 53492] Re: Booting w/new kernel impossible References: <20060720024807.23514.94942.malonedeb@gangotri.ubuntu.com> Message-ID: <20060720155050.11169.94840.malone@gandwana.ubuntu.com> So -25 works and -26 doesn't? When you get to the grub menu, choose the "recovery" mode for the -26 kernel so we can see more output. If possible, please take a digital photo of this screen where it stops and attach it to this bug report (via the web itnerface, not via email). Thanks ** Changed in: linux-meta (Ubuntu) Sourcepackagename: linux-meta => linux-source-2.6.15 -- Booting w/new kernel impossible https://launchpad.net/bugs/53492 From yogich at sc2000.net Thu Jul 20 15:54:54 2006 From: yogich at sc2000.net (CH) Date: Thu, 20 Jul 2006 15:54:54 -0000 Subject: [Bug 53492] Re: Booting w/new kernel impossible References: <20060720024807.23514.94942.malonedeb@gangotri.ubuntu.com> Message-ID: <20060720155454.22384.92286.malone@gangotri.ubuntu.com> I was looking at my /boot/grub/menu.lst and noticed something extremely interesting: The first line does not boot; the second line does boot. This one locks up the box: title Ubuntu, kernel 2.6.15-26-386 Default root (hd0,2) kernel /boot/vmlinuz root=/dev/hda3 ro vga=0x323 quiet splash savedefault boot This one boots the box: title Ubuntu, kernel 2.6.15-26-386 root (hd0,2) kernel /boot/vmlinuz-2.6.15-26-386 root=/dev/hda3 ro vga=0x323 quiet splash initrd /boot/initrd.img-2.6.15-26-386 savedefault I just noticed the absence of the version# in the parameters line. This line is auto-generated. Duh! Somehow it did not get auto-generated correctly. The difference between the two statements is the 18JUL06 update to linux-image-2.6.26. Confirmation? Just take a look at the lines. :-) lol I missed it, earlier. -- Booting w/new kernel impossible https://launchpad.net/bugs/53492 From ben.collins at ubuntu.com Thu Jul 20 16:00:41 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Thu, 20 Jul 2006 16:00:41 -0000 Subject: [Bug 53533] Re: [Bug 53533] Re: Compile error with ACPI off References: <20060720151810.11169.18487.malonedeb@gandwana.ubuntu.com> <20060720151946.11169.38670.malone@gandwana.ubuntu.com> Message-ID: <1153411242.5057.74.camel@grayson> On Thu, 2006-07-20 at 15:19 +0000, Pascal de Bruijn wrote: > This should fix the issue. The kernel compiles and boots with the patch. > > Please consider that I'm not an experienced kernel developer or C > programmer. You'll need to attach the patch to the bug report from the web interface, not via email. Also, not sure why you disabled ACPI support anyway. It can be disabled on the kernel command line with acpi=off. -- Compile error with ACPI off https://launchpad.net/bugs/53533 From ben.collins at ubuntu.com Thu Jul 20 16:02:42 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Thu, 20 Jul 2006 16:02:42 -0000 Subject: [Bug 53524] Re: DMA access to CD-writer hangs IDE bus References: <20060720141234.11169.84794.malonedeb@gandwana.ubuntu.com> Message-ID: <20060720160242.22448.32089.launchpad@gangotri.ubuntu.com> ** Changed in: linux-source-2.6.15 (Ubuntu) Importance: Untriaged => Medium Assignee: (unassigned) => Ben Collins Status: Unconfirmed => Fix Committed -- DMA access to CD-writer hangs IDE bus https://launchpad.net/bugs/53524 From scott at ubuntu.com Thu Jul 20 16:00:45 2006 From: scott at ubuntu.com (Scott James Remnant) Date: Thu, 20 Jul 2006 16:00:45 -0000 Subject: [Bug 23445] Re: iMac G5 will freeze after booting up References: <20060113142343.21012.90472.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060720160046.11213.8917.launchpad@gandwana.ubuntu.com> ** Bug 46138 has been marked a duplicate of this bug -- iMac G5 will freeze after booting up https://launchpad.net/bugs/23445 From scott at ubuntu.com Thu Jul 20 16:00:45 2006 From: scott at ubuntu.com (Scott James Remnant) Date: Thu, 20 Jul 2006 16:00:45 -0000 Subject: [Bug 46138] Re: dev/pmu should be created by udev References: <20060523115602.31072.41567.malonedeb@gangotri.ubuntu.com> Message-ID: <20060720160045.11213.34182.launchpad@gandwana.ubuntu.com> *** This bug is a duplicate of bug 23445 *** ** This bug has been marked a duplicate of bug 23445 iMac G5 will freeze after booting up -- dev/pmu should be created by udev https://launchpad.net/bugs/46138 From pisuke at tiscali.co.uk Thu Jul 20 16:08:24 2006 From: pisuke at tiscali.co.uk (pisuke) Date: Thu, 20 Jul 2006 16:08:24 -0000 Subject: [Bug 49848] Re: Laptop too hot References: <20060615132555.31244.46217.malonedeb@gandwana.ubuntu.com> Message-ID: <20060720160825.22448.2976.malone@gangotri.ubuntu.com> I have a similar problem with a BenQ Joybook 8000 (CPU is a Pentium 4 M). I can't run cpu intensive tasks (and I used to with Breezy Badger without any problem) because the CPU temperature gets hotter and hotter until 95 Celsius degrees, when the laptop hangs and I have to hard boot it. The only "workaround" I've found is to run powersave -l to scale down the CPU frequency from 2.6 GHz to 1.2 GHz, but as you may imagine this is not optimal, because I need as much CPU speed as possible. As I said, everything was fine with Breezy Badger, but with Dapper Drake I can't really work :( Any clues? Thanks, Francesco -- Laptop too hot https://launchpad.net/bugs/49848 From ben.collins at ubuntu.com Thu Jul 20 16:22:11 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Thu, 20 Jul 2006 16:22:11 -0000 Subject: [Bug 53492] Re: Booting w/new kernel impossible References: <20060720024807.23514.94942.malonedeb@gangotri.ubuntu.com> Message-ID: <20060720162211.11213.87601.malone@gandwana.ubuntu.com> No initrd for the first entry, plus it somehow got a symlink for the actual kernel. So just do this: sudo rm -f /boot/vmlinuz sudo update-grub Life should be good after that. Most likely you or something else modified (or removed) /etc/kernel-img.conf, which is what tells it to create or not create this symlink. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Needs Info => Rejected -- Booting w/new kernel impossible https://launchpad.net/bugs/53492 From yogich at sc2000.net Thu Jul 20 16:33:20 2006 From: yogich at sc2000.net (CH) Date: Thu, 20 Jul 2006 16:33:20 -0000 Subject: [Bug 53492] Re: [Bug 53492] Re: Booting w/new kernel impossible References: <20060720024807.23514.94942.malonedeb@gangotri.ubuntu.com> <20060720162211.11213.87601.malone@gandwana.ubuntu.com> Message-ID: <200607201133.22473.yogich@sc2000.net> On Thursday 20 July 2006 11:22, Ben Collins wrote: > No initrd for the first entry, plus it somehow got a symlink for the > actual kernel. > > So just do this: > > sudo rm -f /boot/vmlinuz > sudo update-grub > > Life should be good after that. Most likely you or something else > modified (or removed) /etc/kernel-img.conf, which is what tells it to > create or not create this symlink. > > ** Changed in: linux-source-2.6.15 (Ubuntu) > Status: Needs Info => Rejected Since I have not modified or removed ?etc/kernel-img.conf, something else happened to it because it is not there. Wow. I wonder what could have happened. Suppose we will never know. Thanks for the help. :-) -- ...CH -- Booting w/new kernel impossible https://launchpad.net/bugs/53492 From ben.collins at ubuntu.com Thu Jul 20 16:43:30 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Thu, 20 Jul 2006 16:43:30 -0000 Subject: [Bug 53492] Re: [Bug 53492] Re: [Bug 53492] Re: Booting w/new kernel impossible References: <20060720024807.23514.94942.malonedeb@gangotri.ubuntu.com> <20060720162211.11213.87601.malone@gandwana.ubuntu.com> <200607201133.22473.yogich@sc2000.net> Message-ID: <1153413811.5057.80.camel@grayson> Here's the contents of mine, so you can create it: $ cat /etc/kernel-img.conf do_symlinks = yes relative_links = yes do_bootloader = no do_bootfloppy = no do_initrd = yes link_in_boot = no postinst_hook = /sbin/update-grub postrm_hook = /sbin/update-grub -- Booting w/new kernel impossible https://launchpad.net/bugs/53492 From ben.collins at ubuntu.com Thu Jul 20 16:43:30 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Thu, 20 Jul 2006 16:43:30 -0000 Subject: [Bug 53492] Re: [Bug 53492] Re: [Bug 53492] Re: Booting w/new kernel impossible References: <20060720024807.23514.94942.malonedeb@gangotri.ubuntu.com> <20060720162211.11213.87601.malone@gandwana.ubuntu.com> <200607201133.22473.yogich@sc2000.net> Message-ID: <1153413811.5057.80.camel@grayson> Here's the contents of mine, so you can create it: $ cat /etc/kernel-img.conf do_symlinks = yes relative_links = yes do_bootloader = no do_bootfloppy = no do_initrd = yes link_in_boot = no postinst_hook = /sbin/update-grub postrm_hook = /sbin/update-grub -- Booting w/new kernel impossible https://launchpad.net/bugs/53492 From pmjdebruijn at gmail.com Thu Jul 20 18:18:31 2006 From: pmjdebruijn at gmail.com (Pascal de Bruijn) Date: Thu, 20 Jul 2006 18:18:31 -0000 Subject: [Bug 53533] Re: Compile error with ACPI off References: <20060720151810.11169.18487.malonedeb@gandwana.ubuntu.com> Message-ID: <20060720181831.11169.98698.malone@gandwana.ubuntu.com> > You'll need to attach the patch to the bug report from the web > interface, not via email. Sorry I don't follow. > Also, not sure why you disabled ACPI support anyway. It can be disabled > on the kernel command line with acpi=off. Well it's intended for a low memory, low diskspace system, so every byte counts. Either way, it should be fixed. -- Compile error with ACPI off https://launchpad.net/bugs/53533 From pmjdebruijn at gmail.com Thu Jul 20 18:24:44 2006 From: pmjdebruijn at gmail.com (Pascal de Bruijn) Date: Thu, 20 Jul 2006 18:24:44 -0000 Subject: [Bug 53550] USB Mass Storage: I/O error References: <20060720182444.11213.12318.malonedeb@gandwana.ubuntu.com> Message-ID: <20060720182444.11213.12318.malonedeb@gandwana.ubuntu.com> Public bug reported: After just buying a new USB MP3 Player, it seems to produce lots of I/O Errors: Time MP3 Audio Player (DPA-20FL) 256MB lsusb: Bus 004 Device 002: ID 0dda:0301 Integrated Circuit Solution, Inc. After mounting the device, everything seems fine. Copying files to it seems fine, but unmounting takes ages, and produces lots of I/O errors on the dmesg: [17179830.684000] sd 4:0:0:0: SCSI error: return code = 0x10070000 [17179830.684000] end_request: I/O error, dev sde, sector 19 [17179830.684000] Buffer I/O error on device sde, logical block 19 [17179830.684000] lost page write due to I/O error on sde ** Affects: linux-source-2.6.15 (Ubuntu) Importance: Untriaged Status: Unconfirmed -- USB Mass Storage: I/O error https://launchpad.net/bugs/53550 From pmjdebruijn at gmail.com Thu Jul 20 18:26:08 2006 From: pmjdebruijn at gmail.com (Pascal de Bruijn) Date: Thu, 20 Jul 2006 18:26:08 -0000 Subject: [Bug 53550] Re: USB Mass Storage: I/O error References: <20060720182444.11213.12318.malonedeb@gandwana.ubuntu.com> Message-ID: <20060720182608.22448.89032.malone@gangotri.ubuntu.com> In the attachment are the errors which are caused by deleting two files and unmounting the usb mp3 player. -- USB Mass Storage: I/O error https://launchpad.net/bugs/53550 From neale at lanl.gov Thu Jul 20 19:23:14 2006 From: neale at lanl.gov (Neale Pickett) Date: Thu, 20 Jul 2006 19:23:14 -0000 Subject: [Bug 52679] Re: Linux upgrade doesn't update symlinks used by yaboot References: <20060711192201.27257.9057.malonedeb@gangotri.ubuntu.com> Message-ID: <20060720192314.22384.27510.malone@gangotri.ubuntu.com> I can confirm this behavior on a fresh install from a 6.06 Kubuntu PPC CD. I installed, rebooted, set up the network, and did an upgrade, nothing else (well, I set the color scheme for KDE), and yaboot.conf is looking in /boot but /boot has the old symlinks. I can provide the CD image if you'd like. I'm sorry but I don't recall where I downloaded it (but it was one of the 6 US mirrors off of kubuntu.com). -- Linux upgrade doesn't update symlinks used by yaboot https://launchpad.net/bugs/52679 From magicfab at gmail.com Thu Jul 20 20:59:51 2006 From: magicfab at gmail.com (=?utf-8?b?RmFiacOhbiBSb2Ryw61ndWV6?=) Date: Thu, 20 Jul 2006 20:59:51 -0000 Subject: [Bug 48263] Re: [regression] Wired ethernet (VIA VT6102 Rhine II) and Wireless (RaLink 2500) no longer work under 6.06 (needs acpi=noirq blacklisting) References: <20060603190743.2224.85055.malonedeb@gangotri.ubuntu.com> Message-ID: <20060720205951.22384.45245.malone@gangotri.ubuntu.com> I originally reported this in #34958. I can confirm the acpi=noirq option in the appropriate menu.lst entry works. However current ISOs do not include this fix, which makes it very difficult for a new user to update their system unless they are aware of this bug report and read it completely. Is there a better way to let Averatec owners know about this ? The blacklisting is now automatic, but only after applying a kernel upgrade. So, basically, if one has an Averatec 3250HX-01 like me, they have to first manually modify the menu.lst entry for the kernel they load and add the acpi=noirq option to enable network access, and apply current updates to the kernel. -- [regression] Wired ethernet (VIA VT6102 Rhine II) and Wireless (RaLink 2500) no longer work under 6.06 (needs acpi=noirq blacklisting) https://launchpad.net/bugs/48263 From magicfab at gmail.com Thu Jul 20 21:05:55 2006 From: magicfab at gmail.com (=?utf-8?b?RmFiacOhbiBSb2Ryw61ndWV6?=) Date: Thu, 20 Jul 2006 21:05:55 -0000 Subject: [Bug 34958] Re: IRQ 11 disabled, no network, desktop / kernel freeze (Averatec laptop) - regression from Breezy References: <20060314220405.17018.47701.malonedeb@gangotri.ubuntu.com> Message-ID: <20060720210555.22384.57422.malone@gangotri.ubuntu.com> *** This bug is a duplicate of bug 48263 *** This seems to be fixed as described in this duplicate bug report: https://launchpad.net/bugs/48263 I have been using this method with my Averatec model 3250HX-01 without incident for the last week. However, you need to follow these steps first: 1) edit /boot/grub/menu.lst as root ( sudo nano /boot/grub/menu.lst ) 2) Look for the first section similar to: title Ubuntu, kernel 2.6.xxxxxxx-k7 root (hd0,2) kernel /boot/vmlinuz-2.6.xxxxxxxxx-k7 root=/dev/hda3 ro quiet splash initrd /boot/initrd.img-2.6.xxxxxxxx-k7 savedefault boot 3) At the end of the "kernel" line, add "acpi=noirq" so it looks like this: kernel /boot/vmlinuz-2.6.xxxxxxxxx-k7 root=/dev/hda3 ro quiet splash acpi=noirq 4) Save the file, reboot the machine Once you have rebooted, you will have network capabilities. Perform a full system update / upgrade, including kernel. The menu.lst file should update itself accordingly and the new kernel versions from now on will include the equivalente acpi=noirq option. -- IRQ 11 disabled, no network, desktop / kernel freeze (Averatec laptop) - regression from Breezy https://launchpad.net/bugs/34958 From crimsun at fungus.sh.nu Thu Jul 20 22:37:12 2006 From: crimsun at fungus.sh.nu (Daniel T Chen) Date: Thu, 20 Jul 2006 22:37:12 -0000 Subject: [Bug 45246] Re: Dapper: recent upgrade caused loss of sound on IBM Thinkpad T21 References: <20060517141056.15142.20635.malonedeb@gandwana.ubuntu.com> Message-ID: <20060720223712.11169.58376.launchpad@gandwana.ubuntu.com> *** This bug is a duplicate of bug 21804 *** ** This bug has been marked a duplicate of bug 21804 alsa-utils cannot always restore mixer settings correctly across upgrades -- Dapper: recent upgrade caused loss of sound on IBM Thinkpad T21 https://launchpad.net/bugs/45246 From crimsun at fungus.sh.nu Thu Jul 20 22:37:12 2006 From: crimsun at fungus.sh.nu (Daniel T Chen) Date: Thu, 20 Jul 2006 22:37:12 -0000 Subject: [Bug 21804] Re: alsa-utils cannot always restore mixer settings correctly across upgrades References: <20060113141451.21012.95289.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060720223712.11169.42490.launchpad@gandwana.ubuntu.com> ** Bug 45246 has been marked a duplicate of this bug -- alsa-utils cannot always restore mixer settings correctly across upgrades https://launchpad.net/bugs/21804 From forums at theo.to Fri Jul 21 00:17:18 2006 From: forums at theo.to (kozimodo) Date: Fri, 21 Jul 2006 00:17:18 -0000 Subject: [Bug 38865] Re: sky2 driver freezing system after ifdown and ifup References: <20060409125752.32313.97119.malonedeb@gandwana.ubuntu.com> Message-ID: <20060721001718.11169.54429.malone@gandwana.ubuntu.com> It seems that the new kernel upgrade (2.6.15-25.45) has broken the sky2 module again -- it had been working fine on my AOpen EZ482 for quite some time. -- sky2 driver freezing system after ifdown and ifup https://launchpad.net/bugs/38865 From anthony at interlink.com.au Fri Jul 21 02:14:54 2006 From: anthony at interlink.com.au (anthony baxter) Date: Fri, 21 Jul 2006 02:14:54 -0000 Subject: [Bug 53578] recent dapper kernels causing lockups on Dell Latitude D600 References: <20060721021454.22448.68218.malonedeb@gangotri.ubuntu.com> Message-ID: <20060721021454.22448.68218.malonedeb@gangotri.ubuntu.com> Public bug reported: The last two kernel upgrades for Dapper (starting with the one that came as the same time as replacement ATI drivers - -25, I _think_ it was) have led to massive stability problems on this Dell Latitude D600. The hwdb ID is 3378cfe0d9fc6397152e6dbbf53268b7. There's a couple of symptoms - sometimes, the box just locks up hard - other times it locks up for 5-10s, then works again for a second or two, then locks again, repeat. kern.log spits out (when it unfreezes) messages like: Jul 21 11:39:45 localhost kernel: [17180586.548000] BUG: soft lockup detected on CPU#0! Jul 21 11:39:45 localhost kernel: [17180586.548000] Jul 21 11:39:45 localhost kernel: [17180586.548000] Pid: 0, comm: swapper Jul 21 11:39:45 localhost kernel: [17180586.548000] EIP: 0060:[delay_pmtmr+20/32] CPU: 0 Jul 21 11:39:45 localhost kernel: [17180586.548000] EIP is at delay_pmtmr+0x14/0x20 Jul 21 11:39:45 localhost kernel: [17180586.548000] EFLAGS: 00000287 Not tainted (2.6.15-26-686) Jul 21 11:39:45 localhost kernel: [17180586.548000] EAX: f9ba20ec EBX: 00004d53 ECX: f9b9e709 EDX: 00000184 Jul 21 11:39:45 localhost kernel: [17180586.548000] ESI: dfcff2a0 EDI: c03a7ec8 EBP: c03a7ebc DS: 007b ES: 007b Jul 21 11:39:45 localhost kernel: [17180586.548000] CR0: 8005003b CR2: b7adccd0 CR3: 1f866000 CR4: 00000690 Jul 21 11:39:45 localhost kernel: [17180586.548000] [pg0+945244390/1069167616] tg3_readphy+0x66/0x120 [tg3] Jul 21 11:39:45 localhost kernel: [17180586.548000] [pg0+945252652/1069167616] tg3_setup_copper_phy+0x21c/0x9a0 [tg3] Jul 21 11:39:45 localhost kernel: [17180586.548000] [pg0+945282752/1069167616] tg3_timer+0x0/0x350 [tg3] Jul 21 11:39:45 localhost kernel: [17180586.548000] [pg0+945260431/1069167616] tg3_setup_phy+0x9f/0x100 [tg3] Jul 21 11:39:45 localhost kernel: [17180586.548000] [pg0+945283214/1069167616] tg3_timer+0x1ce/0x350 [tg3] Jul 21 11:39:45 localhost kernel: [17180586.548000] [wake_up_process+29/32] wake_up_process+0x1d/0x20 Jul 21 11:39:45 localhost kernel: [17180586.548000] [run_timer_softirq+227/480] run_timer_softirq+0xe3/0x1e0 Jul 21 11:39:45 localhost kernel: [17180586.548000] [handle_IRQ_event+61/112] handle_IRQ_event+0x3d/0x70 Jul 21 11:39:45 localhost kernel: [17180586.548000] [__do_softirq+114/224] __do_softirq+0x72/0xe0 Jul 21 11:39:45 localhost kernel: [17180586.548000] [do_softirq+53/64] do_softirq+0x35/0x40 Jul 21 11:39:45 localhost kernel: [17180586.548000] [irq_exit+69/80] irq_exit+0x45/0x50 Jul 21 11:39:45 localhost kernel: [17180586.548000] [do_IRQ+30/48] do_IRQ+0x1e/0x30 Jul 21 11:39:45 localhost kernel: [17180586.548000] [common_interrupt+26/32] common_interrupt+0x1a/0x20 Jul 21 11:39:45 localhost kernel: [17180586.548000] [pg0+943816347/1069167616] acpi_processor_idle+0x184/0x32d [processor] Jul 21 11:39:45 localhost kernel: [17180586.548000] [cpu_idle+111/192] cpu_idle+0x6f/0xc0 Jul 21 11:39:45 localhost kernel: [17180586.548000] [start_kernel+415/512] start_kernel+0x19f/0x200 Jul 21 11:39:45 localhost kernel: [17180586.548000] [unknown_bootoption+0/496] unknown_bootoption+0x0/0x1f0 I thought it might be a hardware problem, but running the stupid little Dell diagnostic program in a loop for hours didn't seem to trigger it - I'm now running on the -23 kernel again, and it _seems_ to have made the problem go away. I can provide more info if needed. ** Affects: linux-source-2.6.15 (Ubuntu) Importance: Untriaged Status: Unconfirmed -- recent dapper kernels causing lockups on Dell Latitude D600 https://launchpad.net/bugs/53578 From freehil at gmail.com Fri Jul 21 05:28:53 2006 From: freehil at gmail.com (Hil) Date: Fri, 21 Jul 2006 05:28:53 -0000 Subject: [Bug 46822] Correct Resolution References: <20060526200321.22039.38802.malonedeb@gangotri.ubuntu.com> Message-ID: <20060721052853.11169.24410.malone@gandwana.ubuntu.com> I had totally the same problem. My "lspci" returns the same Davicom ethernet NIC. I followed the http://www.ubuntuforums.org/showthread.php?t=186430 and fixed the problem. It's great. I should have looked into ubuntu before I suspected my ethernet cable was failing. Thumb up to the ubuntu community. Who gave the fix? That person must be an excellent software design engineer in test. -- Network interface ureliable in Dapper release-candidate https://launchpad.net/bugs/46822 From mnoiesen at bigpond.net.au Fri Jul 21 06:28:50 2006 From: mnoiesen at bigpond.net.au (Noiesmo) Date: Fri, 21 Jul 2006 06:28:50 -0000 Subject: [Bug 53602] apt-get dist-upgrade References: <20060721062850.11213.71427.malonedeb@gandwana.ubuntu.com> Message-ID: <20060721062850.11213.71427.malonedeb@gandwana.ubuntu.com> Public bug reported: Binary package hint: linux-image-2.6.15-26-386 System does not power down, power button needs to be pushed to turn power off on system. Under linux-image-2.6.12-9-386 the system turned it self off totally no need to push power button ** Affects: linux-source-2.6.15 (Ubuntu) Importance: Untriaged Status: Unconfirmed -- apt-get dist-upgrade https://launchpad.net/bugs/53602 From dktrkranz at linuxdc.it Fri Jul 21 07:03:31 2006 From: dktrkranz at linuxdc.it (Luca Falavigna) Date: Fri, 21 Jul 2006 07:03:31 -0000 Subject: [Bug 50610] Re: Kernel hangs on USB-devices without panic References: <20060621194534.23311.60060.malonedeb@gangotri.ubuntu.com> Message-ID: <20060721070331.11213.94419.malone@gandwana.ubuntu.com> Try passing acpi=force to the bootloader. See also bug #51771 -- Kernel hangs on USB-devices without panic https://launchpad.net/bugs/50610 From b_i_berg at yahoo.no Fri Jul 21 09:02:30 2006 From: b_i_berg at yahoo.no (=?utf-8?q?Bj=C3=B8rn_Ingmar_Berg?=) Date: Fri, 21 Jul 2006 09:02:30 -0000 Subject: [Bug 53606] IBM Thinkpad R40e special keys does not work with ACPI References: <20060721074626.22384.77155.malonedeb@gangotri.ubuntu.com> Message-ID: <20060721090230.11169.54978.launchpad@canonical@gandwana.ubuntu.com> Public bug reported: Binary package hint: acpi IBM Thinkpad R40e, type 2684-HRG Ubuntu 6.06, kernel version 2.6.15-26-686, all security pathes. ACPI version 0.09-1 When booting normally all power-related functions work. (Detection of main power / battery, battery charge indicator, etc.) Ubuntu is able to shut the computer completely off. With a normal boot no special keys function. When booting with the added parameter ACPI=OFF NO power-related functions work. (Detection of main power / battery, battery charge indicator, etc.) Ubuntu is NOT able to shut the computer completely off. When booting with the added parameter ACPI=OFF special keys function as they should. They keys affected are: "Volume up" "Volume down" "Mute" and all special functions invoked via the key. "Previous page" "Next page" ** Affects: linux-source-2.6.15 (Ubuntu) Importance: Untriaged Status: Unconfirmed -- IBM Thinkpad R40e special keys does not work with ACPI https://launchpad.net/bugs/53606 From mjg59 at codon.org.uk Fri Jul 21 09:02:30 2006 From: mjg59 at codon.org.uk (Matthew Garrett) Date: Fri, 21 Jul 2006 09:02:30 -0000 Subject: [Bug 53606] Re: IBM Thinkpad R40e special keys does not work with ACPI References: <20060721074626.22384.77155.malonedeb@gangotri.ubuntu.com> Message-ID: <20060721090230.11169.25300.launchpad@gandwana.ubuntu.com> ** Changed in: acpi (Ubuntu) Sourcepackagename: acpi => linux-source-2.6.15 -- IBM Thinkpad R40e special keys does not work with ACPI https://launchpad.net/bugs/53606 From nick at nickhill.co.uk Fri Jul 21 10:41:56 2006 From: nick at nickhill.co.uk (Nick_Hill) Date: Fri, 21 Jul 2006 10:41:56 -0000 Subject: [Bug 34902] Re: Ralink Wireless USB/PCMCIA/PCI hangs PC - worksforme(almost) References: <20060314143545.30082.52680.malonedeb@gandwana.ubuntu.com> Message-ID: <20060721104156.11213.31069.malone@gandwana.ubuntu.com> I am using a d-link WL-107g cardbus adapter connected to an IBM thinkpad 570 (Pentium 2 366). The adapter uses the ralink RT-2500 chipset. lspci -v: 0000:06:00.0 Network controller: RaLink Ralink RT2500 802.11 Cardbus Reference Card (rev 01) Subsystem: ASUSTeK Computer Inc.: Unknown device 107f Flags: bus master, slow devsel, latency 64, IRQ 11 Memory at 16000000 (32-bit, non-prefetchable) [size=8K] Capabilities: [40] Power Management version 2 I using kernel 2.6.15-26-386 with Ubuntu dapper. I have tried using dhclient, unplugging the adapter live, plugging it back in, shutting down/restarting. The card has consistently performed as expected. I have tried using 'dhclient' 'iwlist ra0 scan' everything works as expected. I have performed an upgrade to kernel 2.6.15-26.45 -686 and all bahaves as expected. -- Ralink Wireless USB/PCMCIA/PCI hangs PC https://launchpad.net/bugs/34902 From lostec at hotmail.fr Fri Jul 21 11:17:26 2006 From: lostec at hotmail.fr (Yann) Date: Fri, 21 Jul 2006 11:17:26 -0000 Subject: [Bug 49439] RE: [Bug 49439] Re: No sound on Toshiba Satellite p100-114 with intel-hdachipset References: <20060612081247.25765.80831.malonedeb@gangotri.ubuntu.com> <20060719145808.32401.13755.malone@gandwana.ubuntu.com> Message-ID: OK, so let's write in french... I'ma a parisian breton ;o) Donc pour l'ACPI, j'avait lu que ça pouvait avoir un effet... Mais a part au niveau du routrage d'interruptions, je ne voyais pas. Et il existe normalement une option "routeirq" qui normalement doit permettre de résoudre ce genre de souçi sans se passer d'ACPI: Résultat, ça ne marchait pas chez moi et j'avais laché l'affaire. J'essaierais donc l'option de virer l'ACPI. Pour Conexant, déjà essayé => aucune réponse. Toshiba pareil... ne donnent pas de support a ce niveau disent-ils... alors même que les réglements europpéens leurs imposent de la faire sur demande (Microsoft est d'ailleurs poursuivi par la commission europpéenne justement pour cause de manque d'infos techniques sur windows...). Après leur avoir répondu qu'ils devaient le faire car c'est une des contreparties pour pouvoir vendre ses produits en europe: Plus de réponse. Bref, face a ça... a part attendre de voir si le projet de Breton sur les class-actions permettra de s'unir contre ce genre de mauvaise volonté (Conexant est le spécialiste de datasheet fourni avec des accords de "non disclosures" incompatibles avec la publication de code GPL, par nature sous forme de code source), je ne vois pas de moyen d'aller + loin :-(( Pas envie de payer un avocat des mois (années?) pour forçer Toshiba a forçer Conexant a se conformer a nos lois. A+ Yann >From: yannick >Reply-To: Bug 49439 <49439 at bugs.launchpad.net> >To: lostec at hotmail.fr >Subject: [Bug 49439] Re: No sound on Toshiba Satellite p100-114 with >intel-hdachipset >Date: Wed, 19 Jul 2006 14:58:08 -0000 > >I have found a solution for the sound. > >If you pass acpi=off in Grub, sound is Ok with Alsa 1.0.11. >I'm happy to heard music with this very good laptop ! (ACPI for a laptop is >essentiel but for me, not vital) > >Anyway, if you want to watch evolution of Alsa's bug, it's here : >https://bugtrack.alsa-project.org/alsa-bug/view.php?id=2174 > >=>Yann : Perhaps it a good solution to contact Conexant directly ? it is >possible ? >Have you tried to use the remote control for play / pause / etc.. ? I can't >find a solution for that actually... > >Perhaps it's a good idea to write a page for this laptop on Ubuntu's >wiki to share our experiment ? > >PS : sorry for my bad english, i'm a french's breton :)) > >-- >No sound on Toshiba Satellite p100-114 with intel-hda chipset >https://launchpad.net/bugs/49439 _________________________________________________________________ Retrouvez tout en un clin d'oeil avec la barre d'outil MSN Search ! http://desktop.msn.fr/ -- No sound on Toshiba Satellite p100-114 with intel-hda chipset https://launchpad.net/bugs/49439 From jriddell at ubuntu.com Fri Jul 21 11:47:18 2006 From: jriddell at ubuntu.com (Jonathan Riddell) Date: Fri, 21 Jul 2006 11:47:18 -0000 Subject: [Bug 53629] joystick.h does not define its own types References: <20060721114718.11213.12976.malonedeb@gandwana.ubuntu.com> Message-ID: <20060721114718.11213.12976.malonedeb@gandwana.ubuntu.com> Public bug reported: Binary package hint: linux-386 kdebase has failed to compile on i386 and powerpc, the error seems to indicate a problem in joystick.h. Googling on the error message suggests its an occational problem with this file. http://librarian.launchpad.net/3507074/buildlog_ubuntu- edgy-i386.kdebase_4:3.5.3-2ubuntu7_FAILEDTOBUILD.txt.gz /usr/include/linux/joystick.h:131: error: '__s64' does not name a type /usr/include/linux/joystick.h:132: error: '__s64' does not name a type ** Affects: linux-meta (Ubuntu) Importance: Untriaged Status: Unconfirmed -- joystick.h does not define its own types https://launchpad.net/bugs/53629 From johan.walles at gmail.com Fri Jul 21 12:49:41 2006 From: johan.walles at gmail.com (Johan Walles) Date: Fri, 21 Jul 2006 12:49:41 -0000 Subject: [Bug 49450] Re: 2.6.15-23-686 hangs a couple of times per week References: <20060612112731.25801.13769.malonedeb@gangotri.ubuntu.com> Message-ID: <20060721124941.22448.52264.malone@gangotri.ubuntu.com> Got another one of these hangs right now. Any idea about how to track this down? I've worked around my X problems by disabling DRI, so I'm now properly SMP. -- 2.6.15-23-686 hangs a couple of times per week https://launchpad.net/bugs/49450 From dktrkranz at linuxdc.it Fri Jul 21 13:33:19 2006 From: dktrkranz at linuxdc.it (Luca Falavigna) Date: Fri, 21 Jul 2006 13:33:19 -0000 Subject: [Bug 51771] Ubuntu crashes when plugging in a USB device References: <20060703191010.17054.47572.malonedeb@gangotri.ubuntu.com> Message-ID: <20060721133319.22448.95761.launchpad@canonical@gangotri.ubuntu.com> Public bug reported: I noticed a strange behaviour when plugging in a USB device in Dapper. As soon as I plug in any device, system freezes completely beyond any recovery. Disabling hal everything works fine. It should not a kernel-related bug because I was running the same kernel in Breezy without any problem. More info can be found here: http://ubuntuforums.org/showthread.php?t=207033 Please find here attached lspci and /proc/cpuinfo output If you need more info, please let me know. -- Luca ** Affects: linux-source-2.6.15 (Ubuntu) Importance: Untriaged Status: Needs Info -- Ubuntu crashes when plugging in a USB device https://launchpad.net/bugs/51771 From martin.pitt at ubuntu.com Fri Jul 21 13:33:19 2006 From: martin.pitt at ubuntu.com (Martin Pitt) Date: Fri, 21 Jul 2006 13:33:19 -0000 Subject: [Bug 51771] Re: Ubuntu crashes when plugging in a USB device References: <20060703191010.17054.47572.malonedeb@gangotri.ubuntu.com> Message-ID: <20060721133319.22448.15449.launchpad@gangotri.ubuntu.com> ** Changed in: hal (Ubuntu) Sourcepackagename: hal => linux-source-2.6.15 ** Summary changed: - Ubuntu crashes when plugging in a USB device + crash when plugging in a USB device with the USB 2.0 driver -- crash when plugging in a USB device with the USB 2.0 driver https://launchpad.net/bugs/51771 From utnubu at sievertsen.de Fri Jul 21 13:46:02 2006 From: utnubu at sievertsen.de (fx5) Date: Fri, 21 Jul 2006 13:46:02 -0000 Subject: [Bug 47561] Re: ACPI-battery monitoring stops working after some time References: <20060530194416.5009.28356.malonedeb@gandwana.ubuntu.com> Message-ID: <20060721134602.22384.4555.malone@gangotri.ubuntu.com> I made a kernel image with this patch, which works for me: http://www.fx5-1.de/~fx5/Linux-HP-Notebook/linux- image-2.6.15-26-386_2.6.15-26.45fx5_i386.deb If you try it, please comment, if it works for you. I only made a 386-version of it, because nx6110-notebooks have an other issue with 686-kernels. Make sure you are using the 386-version (uname -r) -- ACPI-battery monitoring stops working after some time https://launchpad.net/bugs/47561 From kgad at post.tau.ac.il Fri Jul 21 13:52:32 2006 From: kgad at post.tau.ac.il (ZZZ) Date: Fri, 21 Jul 2006 13:52:32 -0000 Subject: [Bug 35174] Re: ThinkPad X60 cannot Resume from Suspend References: <20060316100325.6510.84147.malonedeb@gangotri.ubuntu.com> Message-ID: <20060721135232.11169.30316.malone@gandwana.ubuntu.com> The bug is NOT solved ! Once in a while my ThinkPad cannot resume from suspend. It happens once every 4-5 times. -- ThinkPad X60 cannot Resume from Suspend https://launchpad.net/bugs/35174 From ben at atomnet.co.uk Fri Jul 21 14:20:11 2006 From: ben at atomnet.co.uk (Ben Hodgetts) Date: Fri, 21 Jul 2006 14:20:11 -0000 Subject: [Bug 53645] Omnivision Camera (USB OV) outputs almost wrecked image References: <20060721142011.11169.91908.malonedeb@gandwana.ubuntu.com> Message-ID: <20060721142011.11169.91908.malonedeb@gandwana.ubuntu.com> Public bug reported: Binary package hint: linux-image-2.6.15-26-k7 The camera works fine in Windows, but when used in Linux (with any app) it outputs three copies of the image next to each other and in greyscale. It is detected and the module is loaded fine: [17179603.580000] drivers/usb/media/ov511/ov511.c: USB OV511 video device found [17179604.124000] drivers/usb/media/ov511/ov511.c: Sensor is an OV7610 Attached in the next post is a screenshot from it (although it seems to have de-interlaced itself in the picture and has 6 copies instead of 3). ** Affects: linux-source-2.6.15 (Ubuntu) Importance: Untriaged Status: Unconfirmed -- Omnivision Camera (USB OV) outputs almost wrecked image https://launchpad.net/bugs/53645 From ben at atomnet.co.uk Fri Jul 21 14:21:03 2006 From: ben at atomnet.co.uk (Ben Hodgetts) Date: Fri, 21 Jul 2006 14:21:03 -0000 Subject: [Bug 53645] Re: Omnivision Camera (USB OV) outputs almost wrecked image References: <20060721142011.11169.91908.malonedeb@gandwana.ubuntu.com> Message-ID: <20060721142103.11213.19106.malone@gandwana.ubuntu.com> Attached. -- Omnivision Camera (USB OV) outputs almost wrecked image https://launchpad.net/bugs/53645 From lzap at seznam.cz Fri Jul 21 14:25:41 2006 From: lzap at seznam.cz (=?utf-8?q?Luk=C3=A1=C5=A1_Zapletal?=) Date: Fri, 21 Jul 2006 14:25:41 -0000 Subject: [Bug 34831] Re: Hardlock of entire system (Dapper Flight 5) References: <20060314003317.30057.9117.malonedeb@gandwana.ubuntu.com> Message-ID: <20060721142541.11213.44579.malone@gandwana.ubuntu.com> Any new progress here? Its a blocker for me, I cannot use Rosegarden. -- Hardlock of entire system (Dapper Flight 5) https://launchpad.net/bugs/34831 From launchpad at malaprop.org Fri Jul 21 15:10:29 2006 From: launchpad at malaprop.org (Peter Harkins) Date: Fri, 21 Jul 2006 15:10:29 -0000 Subject: [Bug 45809] Re: Playing video crashes machine References: <20060520230331.4911.19637.malonedeb@gangotri.ubuntu.com> Message-ID: <20060721151029.22448.266.malone@gangotri.ubuntu.com> Just updated today and the problem persists. $ uname -a Linux pinstripe 2.6.15-26-386 #1 PREEMPT Mon Jul 17 19:52:53 UTC 2006 i686 GNU/Linux It no longer seems to be repeatedly switching video modes, it just goes to a black screen and stays there. -- Playing video crashes machine https://launchpad.net/bugs/45809 From osch0001 at umn.edu Fri Jul 21 15:47:18 2006 From: osch0001 at umn.edu (osch0001) Date: Fri, 21 Jul 2006 15:47:18 -0000 Subject: [Bug 35174] Re: [Bug 35174] Re: ThinkPad X60 cannot Resume from Suspend References: <20060316100325.6510.84147.malonedeb@gangotri.ubuntu.com> <20060721135232.11169.30316.malone@gandwana.ubuntu.com> Message-ID: <44C0F706.2050806@umn.edu> Although I have not fully diagnosed it, I am have some occasional problems with suspend as well, but I am always able to get the laptop to resume. The problem seems to crop up when I change power states during the suspend (e.g., I suspend it on AC and try to resume it on battery power). Sometimes when doing this, it seems to get stuck resuming before the LCD is turned on. This can be solved by cycling between AC and battery. Often it starts up immediately during the first state change, but sometimes it takes several tries and a bit of waiting. Upon resume from these suspends, Network Manager seems to be broken, and I need to restart dbus to get it working again, which isn't the case for normal suspends but is the case when I hibernate the machine. As the symptoms of this are significantly different than my earlier resume problems, I think this should probably be filed as another bug. ZZZ, can you get your machine to resume following this method? -- ThinkPad X60 cannot Resume from Suspend https://launchpad.net/bugs/35174 From kgad at post.tau.ac.il Fri Jul 21 16:01:06 2006 From: kgad at post.tau.ac.il (ZZZ) Date: Fri, 21 Jul 2006 16:01:06 -0000 Subject: [Bug 35174] Re: ThinkPad X60 cannot Resume from Suspend References: <20060316100325.6510.84147.malonedeb@gangotri.ubuntu.com> Message-ID: <20060721160106.22384.39005.malone@gangotri.ubuntu.com> No, when it's stuck it's stuck. It happens on both AC and battery, and changing this after it's stuck doesn't help. -- ThinkPad X60 cannot Resume from Suspend https://launchpad.net/bugs/35174 From jwmislan at gmail.com Fri Jul 21 16:56:56 2006 From: jwmislan at gmail.com (jwmislan) Date: Fri, 21 Jul 2006 16:56:56 -0000 Subject: [Bug 6367] Re: udev enumeration should use /sys/bus not /sys/devices References: <20060102180911.29335.17628.malonedeb@gangotri.ubuntu.com> Message-ID: <20060721165656.22384.33408.malone@gangotri.ubuntu.com> to boot from by ID, rather than the transient location: 1. Boot a desktop/LiveCD. 2. Run sudo /sbin/dumpe2fs /dev/sdX | grep UUID 3. tell 'grub' or 'lilo' to boot with that ID: How can I obtain /dev/sdX ID. for reiserfs Thanks JWM -- udev enumeration should use /sys/bus not /sys/devices https://launchpad.net/bugs/6367 From osch0001 at umn.edu Fri Jul 21 17:18:42 2006 From: osch0001 at umn.edu (osch0001) Date: Fri, 21 Jul 2006 17:18:42 -0000 Subject: [Bug 35174] Re: ThinkPad X60 cannot Resume from Suspend References: <20060316100325.6510.84147.malonedeb@gangotri.ubuntu.com> Message-ID: <20060721171842.22448.96712.malone@gangotri.ubuntu.com> ZZZ, I don't seem to experience that problem on my X60s. Given that I experienced bug 35174, perhaps it would be appropriate to file another bug with the details of your problem and hardware so that the information above does not confuse people. Also, I want to note that my bug happens on both battery and AC, but only after I switch from one to another. -- ThinkPad X60 cannot Resume from Suspend https://launchpad.net/bugs/35174 From draimus at gmail.com Fri Jul 21 17:50:02 2006 From: draimus at gmail.com (draimus) Date: Fri, 21 Jul 2006 17:50:02 -0000 Subject: [Bug 36998] Re: Flight 5 Kernel Won't Boot on an IBM Thinkpad R30 References: <20060328130330.20514.53400.malonedeb@gangotri.ubuntu.com> Message-ID: <20060721175002.11169.78465.malone@gandwana.ubuntu.com> Still an issue on Edgy Knot-1. I was able to get Debian Sarge to install and boot on the laptop with their 2.6 kernel (2.6.7 I think). However after boot I got lots of HD errors while installing packages. I'm not sure if that's the same issue. To preserve my primary OS, I had swapped in a very old laptop HD and it might be dying on me. This old HD was not present for any of my previous tests though. PS - Sorry about my previous dupe post, Firefox did something funky when I submitted. -- Flight 5 Kernel Won't Boot on an IBM Thinkpad R30 https://launchpad.net/bugs/36998 From burlap at poczta.onet.pl Fri Jul 21 17:56:06 2006 From: burlap at poczta.onet.pl (=?utf-8?b?UmFmYcWCIFByw7NjaG5pYWs=?=) Date: Fri, 21 Jul 2006 17:56:06 -0000 Subject: [Bug 47186] Re: no power off after shutdown References: <20060528211111.21895.7078.malonedeb@gandwana.ubuntu.com> Message-ID: <20060721175606.22384.20511.malone@gangotri.ubuntu.com> Upgraded system works ok too. What shall I do in cases like this one? "Reject" the bug myself? -- no power off after shutdown https://launchpad.net/bugs/47186 From cisa at cisa85.de Fri Jul 21 18:48:27 2006 From: cisa at cisa85.de (Helmuth Gronewold) Date: Fri, 21 Jul 2006 18:48:27 -0000 Subject: [Bug 50610] Re: Kernel hangs on USB-devices without panic References: <20060621194534.23311.60060.malonedeb@gangotri.ubuntu.com> Message-ID: <20060721184828.22448.35974.malone@gangotri.ubuntu.com> That doesn't work for me. Same problem. Today I made the upgrade to 2.6.15-26-386. The Kernel still hangs when plugging an USB-device. -- Kernel hangs on USB-devices without panic https://launchpad.net/bugs/50610 From kgad at post.tau.ac.il Fri Jul 21 19:29:29 2006 From: kgad at post.tau.ac.il (ZZZ) Date: Fri, 21 Jul 2006 19:29:29 -0000 Subject: [Bug 35174] Re: ThinkPad X60 cannot Resume from Suspend References: <20060316100325.6510.84147.malonedeb@gangotri.ubuntu.com> Message-ID: <20060721192929.22384.74395.malone@gangotri.ubuntu.com> Why open a new bug? It's the same bug. I can copy the first comment of this bug: IBM ThinkPad X60s Sleep: Will not wake up. Button presses have no affect on system. Power button appears to rev up the fan for a few seconds, but system remains off and sleep LED on hardware remains lit. This exactly what happens in my machine. Though it doesn't happen every time: sometimes it resumes and sometimes not. Do you think I should copy these lines to a new bug? -- ThinkPad X60 cannot Resume from Suspend https://launchpad.net/bugs/35174 From th.haberland at hawkeye.net Fri Jul 21 19:33:53 2006 From: th.haberland at hawkeye.net (Thomas Haberland) Date: Fri, 21 Jul 2006 19:33:53 -0000 Subject: [Bug 53475] Re: Incompatible libdevmapper 1.01.03 and kernel driver References: <20060719201203.32401.27122.malonedeb@gandwana.ubuntu.com> Message-ID: <20060721193353.11213.92913.malone@gandwana.ubuntu.com> > Did you check if the dm module is loaded? unfortunately not. Because I never need to manually load the module and automatic mounting of the cryptdisks partition during system boot did work correctly since I installed Kubuntu 5.10 past year. To be honest, in the meantime I found the correct module name for the required module (dm-crypt), the error message wasn't real helpfull. After "modprobe dm-crypt" cryptdisks will start correctly. So the final question is, what happened that a manual module load is required and the automatic mounting during system boot doesn't work anymore after a kernel security update. -- Incompatible libdevmapper 1.01.03 and kernel driver https://launchpad.net/bugs/53475 From ben.collins at ubuntu.com Fri Jul 21 19:44:29 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Fri, 21 Jul 2006 19:44:29 -0000 Subject: [Bug 36998] Re: Flight 5 Kernel Won't Boot on an IBM Thinkpad R30 References: <20060328130330.20514.53400.malonedeb@gangotri.ubuntu.com> Message-ID: <20060721194429.22448.72276.launchpad@gangotri.ubuntu.com> ** Changed in: Ubuntu Sourcepackagename: None => linux-source-2.6.17 Importance: Critical => High Status: Rejected => Confirmed ** Summary changed: - Flight 5 Kernel Won't Boot on an IBM Thinkpad R30 + Kernel Won't Boot on an IBM Thinkpad R30 ** Description changed: Trying to install Dapper Flight 5 on a Thinkpad R30 fails with "hdc: lost interrupt" error. There's also messages about irq 15, no-one caring and appending "irqpoll" to the bootloader. Appending "irqpoll" gets the installation past this stage, with the side-effect of the CD drive no longer being recognised, making installation from CD impossible. Passing "acpi=off" at boot has the same results. Note this bug also affects other distros with recent kernels, like Fedora Core 5 and SLAX 5.08, but does not affect older distros like Ubuntu Hoary, SuSE 9.1 and Linspire 4.5. I can't say whether or not it works on Breezy, as I haven't attempted to install it on this machine. + Note: the original reporter indicated the bug was in package 'kernel- image'; however, that package was not published in Ubuntu. -- Kernel Won't Boot on an IBM Thinkpad R30 https://launchpad.net/bugs/36998 From ben.collins at ubuntu.com Fri Jul 21 19:49:37 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Fri, 21 Jul 2006 19:49:37 -0000 Subject: [Bug 47561] Re: ACPI-battery monitoring stops working after some time References: <20060530194416.5009.28356.malonedeb@gandwana.ubuntu.com> Message-ID: <20060721194937.11213.97137.malone@gandwana.ubuntu.com> We only need one target. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Unconfirmed => Rejected -- ACPI-battery monitoring stops working after some time https://launchpad.net/bugs/47561 From ben.collins at ubuntu.com Fri Jul 21 19:48:02 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Fri, 21 Jul 2006 19:48:02 -0000 Subject: [Bug 46822] Re: Network interface ureliable in Dapper release-candidate References: <20060526200321.22039.38802.malonedeb@gangotri.ubuntu.com> Message-ID: <20060721194802.22448.49580.malone@gangotri.ubuntu.com> Pretty sure this got fixed in recent dapper updates. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Unconfirmed => Fix Released -- Network interface ureliable in Dapper release-candidate https://launchpad.net/bugs/46822 From ben.collins at ubuntu.com Fri Jul 21 19:48:45 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Fri, 21 Jul 2006 19:48:45 -0000 Subject: [Bug 47186] Re: no power off after shutdown References: <20060528211111.21895.7078.malonedeb@gandwana.ubuntu.com> Message-ID: <20060721194845.11213.3512.launchpad@gandwana.ubuntu.com> ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Unconfirmed => Fix Released -- no power off after shutdown https://launchpad.net/bugs/47186 From crimsun at fungus.sh.nu Fri Jul 21 19:55:34 2006 From: crimsun at fungus.sh.nu (Daniel T Chen) Date: Fri, 21 Jul 2006 19:55:34 -0000 Subject: [Bug 34831] Re: Hardlock of entire system (Dapper Flight 5) References: <20060314003317.30057.9117.malonedeb@gandwana.ubuntu.com> Message-ID: <20060721195535.11213.43663.malone@gandwana.ubuntu.com> @Lukáš: Have you tried 2.6.15-26.45? ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Fix Released => Needs Info -- Hardlock of entire system (Dapper Flight 5) https://launchpad.net/bugs/34831 From ben.collins at ubuntu.com Fri Jul 21 20:06:05 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Fri, 21 Jul 2006 20:06:05 -0000 Subject: [Bug 48263] Re: [regression] Wired ethernet (VIA VT6102 Rhine II) and Wireless (RaLink 2500) no longer work under 6.06 (needs acpi=noirq blacklisting) References: <20060603190743.2224.85055.malonedeb@gangotri.ubuntu.com> Message-ID: <20060721200605.11169.43673.malone@gandwana.ubuntu.com> We have point release dapper CD's coming in Aug or so I think. -- [regression] Wired ethernet (VIA VT6102 Rhine II) and Wireless (RaLink 2500) no longer work under 6.06 (needs acpi=noirq blacklisting) https://launchpad.net/bugs/48263 From ben.collins at ubuntu.com Fri Jul 21 20:05:23 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Fri, 21 Jul 2006 20:05:23 -0000 Subject: [Bug 47706] Re: dapper does not include oss sound module: nm256_audio References: <20060531152053.5009.62295.malonedeb@gandwana.ubuntu.com> Message-ID: <20060721200523.11213.31398.malone@gandwana.ubuntu.com> Patch doesn't apply cleanly to dapper. I'll need someone to backport this patch and verify that it works. -- dapper does not include oss sound module: nm256_audio https://launchpad.net/bugs/47706 From ben.collins at ubuntu.com Fri Jul 21 20:12:11 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Fri, 21 Jul 2006 20:12:11 -0000 Subject: [Bug 47561] Re: ACPI-battery monitoring stops working after some time References: <20060530194416.5009.28356.malonedeb@gandwana.ubuntu.com> Message-ID: <20060721201211.11169.79042.launchpad@gandwana.ubuntu.com> ** Changed in: linux-source-2.6.15 (Ubuntu Dapper) Assignee: (unassigned) => Ben Collins Status: Unconfirmed => Fix Committed -- ACPI-battery monitoring stops working after some time https://launchpad.net/bugs/47561 From t.six at gmx.de Fri Jul 21 20:24:48 2006 From: t.six at gmx.de (Thilo Six) Date: Fri, 21 Jul 2006 20:24:48 -0000 Subject: [Bug 42133] Re: installation failed References: <20060429222623.16739.9962.malonedeb@gandwana.ubuntu.com> Message-ID: <20060721202448.22384.59043.malone@gangotri.ubuntu.com> This bug is wrong at MOTU Science. I reassigne it -- installation failed https://launchpad.net/bugs/42133 From t.six at gmx.de Fri Jul 21 20:36:32 2006 From: t.six at gmx.de (Thilo Six) Date: Fri, 21 Jul 2006 20:36:32 -0000 Subject: [Bug 42133] Re: installation failed References: <20060429222623.16739.9962.malonedeb@gandwana.ubuntu.com> Message-ID: <20060721203632.22448.6532.malone@gangotri.ubuntu.com> correction MOTU Scienc is "subscribed" to this bug, which is not necessary. I´ll inform LaserJock about it. -- installation failed https://launchpad.net/bugs/42133 From webmaven at cox.net Fri Jul 21 23:07:15 2006 From: webmaven at cox.net (Michael R. Bernstein) Date: Fri, 21 Jul 2006 23:07:15 -0000 Subject: [Bug 48263] Re: [regression] Wired ethernet (VIA VT6102 Rhine II) and Wireless (RaLink 2500) no longer work under 6.06 (needs acpi=noirq blacklisting) References: <20060603190743.2224.85055.malonedeb@gangotri.ubuntu.com> Message-ID: <20060721230715.11169.65151.malone@gandwana.ubuntu.com> Ben, does this just mean updated ISOs for download, or will revised CDs actually be shipped? -- [regression] Wired ethernet (VIA VT6102 Rhine II) and Wireless (RaLink 2500) no longer work under 6.06 (needs acpi=noirq blacklisting) https://launchpad.net/bugs/48263 From dktrkranz at linuxdc.it Fri Jul 21 23:46:36 2006 From: dktrkranz at linuxdc.it (Luca Falavigna) Date: Fri, 21 Jul 2006 23:46:36 -0000 Subject: [Bug 50610] Re: Kernel hangs on USB-devices without panic References: <20060621194534.23311.60060.malonedeb@gangotri.ubuntu.com> Message-ID: <20060721234636.22384.46424.malone@gangotri.ubuntu.com> I compiled a fresh 2.6.17.6 kernel and system crashed, but I noticed I forgot to provide ACPI support :) Look at dmesg for the string "apm: overridden by ACPI", or any clue ACPI is work properly. If it is present, ACPI support is enabled. Does crash still occour? -- Kernel hangs on USB-devices without panic https://launchpad.net/bugs/50610 From markus.berndt at gmail.com Sat Jul 22 01:41:29 2006 From: markus.berndt at gmail.com (Markus Berndt) Date: Sat, 22 Jul 2006 01:41:29 -0000 Subject: [Bug 41301] Re: Mouse clicks stop working sporadically References: <20060425133728.28941.55233.malonedeb@gangotri.ubuntu.com> Message-ID: <20060722014129.22448.35836.malone@gangotri.ubuntu.com> I am having the same problem. It usually occurs when my T41 wakes up from suspend to ram and network manager connects to my wireless network. When it shows the signal strength icon in the taskbar, the mouse is useless. All I managed to do is Ctrl-Alt-Backspace. I'll have to try to switch the desktop instead, next time it happens. This problem occurs intermittently. -- Mouse clicks stop working sporadically https://launchpad.net/bugs/41301 From ben.collins at ubuntu.com Sat Jul 22 01:47:46 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Sat, 22 Jul 2006 01:47:46 -0000 Subject: [Bug 48263] Re: [Bug 48263] Re: [regression] Wired ethernet (VIA VT6102 Rhine II) and Wireless (RaLink 2500) no longer work under 6.06 (needs acpi=noirq blacklisting) References: <20060603190743.2224.85055.malonedeb@gangotri.ubuntu.com> <20060721230715.11169.65151.malone@gandwana.ubuntu.com> Message-ID: <1153532866.5558.37.camel@grayson> On Fri, 2006-07-21 at 23:07 +0000, Michael R. Bernstein wrote: > Ben, does this just mean updated ISOs for download, or will revised CDs > actually be shipped? Both -- [regression] Wired ethernet (VIA VT6102 Rhine II) and Wireless (RaLink 2500) no longer work under 6.06 (needs acpi=noirq blacklisting) https://launchpad.net/bugs/48263 From dktrkranz at linuxdc.it Sat Jul 22 10:11:26 2006 From: dktrkranz at linuxdc.it (Luca Falavigna) Date: Sat, 22 Jul 2006 10:11:26 -0000 Subject: [Bug 51771] Re: crash when plugging in a USB device with the USB 2.0 driver References: <20060703191010.17054.47572.malonedeb@gangotri.ubuntu.com> Message-ID: <20060722101126.22448.7766.malone@gangotri.ubuntu.com> Thank you for your help, but I am not able to get a backtrace because system crashes as soon as an USB device is plugged in. As you can see from bug #50610, this behaviour only occours when ACPI BIOS is disabled. I heard about a related kernel bug, but a Debian system installed on my PC running the same kernel and hal version is not affected at all. -- crash when plugging in a USB device with the USB 2.0 driver https://launchpad.net/bugs/51771 From gnomefreak at gmail.com Sat Jul 22 12:01:43 2006 From: gnomefreak at gmail.com (John Vivirito) Date: Sat, 22 Jul 2006 12:01:43 -0000 Subject: [Bug 51771] Re: crash when plugging in a USB device with the USB 2.0 driver References: <20060703191010.17054.47572.malonedeb@gangotri.ubuntu.com> Message-ID: <20060722120143.22448.65035.launchpad@gangotri.ubuntu.com> *** This bug is a duplicate of bug 50610 *** ** This bug has been marked a duplicate of bug 50610 Kernel hangs on USB-devices without panic -- crash when plugging in a USB device with the USB 2.0 driver https://launchpad.net/bugs/51771 From gnomefreak at gmail.com Sat Jul 22 12:01:43 2006 From: gnomefreak at gmail.com (John Vivirito) Date: Sat, 22 Jul 2006 12:01:43 -0000 Subject: [Bug 50610] Re: Kernel hangs on USB-devices without panic References: <20060621194534.23311.60060.malonedeb@gangotri.ubuntu.com> Message-ID: <20060722120143.22448.69913.launchpad@gangotri.ubuntu.com> ** Bug 51771 has been marked a duplicate of this bug -- Kernel hangs on USB-devices without panic https://launchpad.net/bugs/50610 From mrts at mrts.pri.ee Sat Jul 22 15:12:48 2006 From: mrts at mrts.pri.ee (Mrts) Date: Sat, 22 Jul 2006 15:12:48 -0000 Subject: [Bug 50034] Re: Burning dvds fail / succeeds with errors References: <20060616184633.13137.88241.malonedeb@gandwana.ubuntu.com> Message-ID: <20060722151248.11169.95846.malone@gandwana.ubuntu.com> Can also confirm this. Getting seek complete errors in Ubuntu and Debian. Burning works in Windows. Ubuntu: $ dpkg -l dvd+rw-tools | grep ^ii ii dvd+rw-tools 5.21.4.10.8-4ubuntu1 DVD+-RW/R tools $ uname -r 2.6.15-26-686 Debian: # dpkg -l dvd+rw-tools | grep ^ii ii dvd+rw-tools 6.1-2 DVD+-RW/R tools # uname -r 2.6.16-2-486 Relevant lines from kernel log: Ubuntu: [ 88.408100] hdc: drive_cmd: status=0x51 { DriveReady SeekComplete Error } [ 88.408132] hdc: drive_cmd: error=0x04 { AbortedCommand } [ 88.408144] ide: failed opcode was: 0xec Debian: hdd: status error: status=0x50 { DriveReady SeekComplete } ide: failed opcode was: unknown hdd: status error: status=0x51 { DriveReady SeekComplete Error } hdd: status error: error=0x20 { LastFailedSense=0x02 } ide: failed opcode was: unknown hdd: status error: status=0x41 { DriveReady Error } hdd: status error: error=0x20 { LastFailedSense=0x02 } ide: failed opcode was: unknown -- Burning dvds fail / succeeds with errors https://launchpad.net/bugs/50034 From mdz at ubuntu.com Sat Jul 22 16:05:44 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Sat, 22 Jul 2006 16:05:44 -0000 Subject: [Bug 53745] [regression] Interacts with the user during upgrades References: <20060722160544.22384.50198.malonedeb@gangotri.ubuntu.com> Message-ID: <20060722160544.22384.50198.malonedeb@gangotri.ubuntu.com> Public bug reported: I just upgraded my kernel, and the "The kernel version running is the same as the one being installed" debconf message was installed. We patched out these notifications ages ago, but it seems that this regressed (probably due to the transition to debconf). ** Affects: kernel-package (Ubuntu) Importance: Untriaged Assignee: Ben Collins Status: Unconfirmed ** Changed in: kernel-package (Ubuntu) Assignee: (unassigned) => Ben Collins -- [regression] Interacts with the user during upgrades https://launchpad.net/bugs/53745 From mdz at ubuntu.com Sat Jul 22 16:08:52 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Sat, 22 Jul 2006 16:08:52 -0000 Subject: [Bug 53745] Re: [regression] Interacts with the user during upgrades References: <20060722160544.22384.50198.malonedeb@gangotri.ubuntu.com> Message-ID: <20060722160852.22448.47271.malone@gangotri.ubuntu.com> Please confirm that the other changes we made are also preserved; we disabled kernel-package interactivity in several other places as well. -- [regression] Interacts with the user during upgrades https://launchpad.net/bugs/53745 From dimitri.meus at gmail.com Sat Jul 22 17:46:39 2006 From: dimitri.meus at gmail.com (Dimitri Meus) Date: Sat, 22 Jul 2006 17:46:39 -0000 Subject: [Bug 34902] Re: [Bug 34902] Re: Ralink Wireless USB/PCMCIA/PCI hangs PC - worksforme(almost) References: <20060314143545.30082.52680.malonedeb@gandwana.ubuntu.com> <20060721104156.11213.31069.malone@gandwana.ubuntu.com> Message-ID: Correct me if I'm wrong, but first you used a kernel for a 386. The one you used after the upgrade is for a 686-system. Is this a typing error? Because it would be of great help if it's the 386-version 2006/7/21, Nick_Hill : > > I am using a d-link WL-107g cardbus adapter connected to an IBM thinkpad > 570 (Pentium 2 366). The adapter uses the ralink RT-2500 chipset. > > lspci -v: > 0000:06:00.0 Network controller: RaLink Ralink RT2500 802.11 Cardbus > Reference Card (rev 01) > Subsystem: ASUSTeK Computer Inc.: Unknown device 107f > Flags: bus master, slow devsel, latency 64, IRQ 11 > Memory at 16000000 (32-bit, non-prefetchable) [size=8K] > Capabilities: [40] Power Management version 2 > > I using kernel 2.6.15-26-386 with Ubuntu dapper. I have tried using > dhclient, unplugging the adapter live, plugging it back in, shutting > down/restarting. The card has consistently performed as expected. > > I have tried using 'dhclient' 'iwlist ra0 scan' everything works as > expected. > > I have performed an upgrade to kernel 2.6.15-26.45 -686 and all bahaves > as expected. > > -- > Ralink Wireless USB/PCMCIA/PCI hangs PC > https://launchpad.net/bugs/34902 > -- Ralink Wireless USB/PCMCIA/PCI hangs PC https://launchpad.net/bugs/34902 From paul.rivier at eleve.emn.fr Sat Jul 22 18:12:18 2006 From: paul.rivier at eleve.emn.fr (Paul RIVIER) Date: Sat, 22 Jul 2006 18:12:18 -0000 Subject: [Bug 6367] EDGY Knot1 livecd FAILS AS WELL on such a system References: <20060102180911.29335.17628.malonedeb@gangotri.ubuntu.com> Message-ID: <20060722181218.11213.77542.malone@gandwana.ubuntu.com> A friend of mine has such a config that totally prevented him from booting Dapper from the HDD. He is therefore still in Breezy. I just asked him to test the Edgy Knot1 livecd and report me if the partitioning part of the installation process was possible, or at least if he can find his HDD in /dev. ANSWER : NO !!! Seems as broken as Dapper on that point ! -> Gparted would hang forever without finding any HDD -> no /dev/sd* and no /dev/hd* at all Is there any other test to do ? -- udev enumeration should use /sys/bus not /sys/devices https://launchpad.net/bugs/6367 From cepe at gmbm.net Sat Jul 22 18:25:26 2006 From: cepe at gmbm.net (=?utf-8?q?Jos=C3=A9_M=2E_L=C3=B3pez-Cepero?=) Date: Sat, 22 Jul 2006 18:25:26 -0000 Subject: [Bug 53754] ata_piix problem with Intel ICH7 chipset References: <20060722182526.11213.79901.malonedeb@gandwana.ubuntu.com> Message-ID: <20060722182526.11213.79901.malonedeb@gandwana.ubuntu.com> Public bug reported: Binary package hint: linux-386 I have an Acer Aspire 9410 Centrino Duo laptop and there seems to be a problem with the SATA controller. Although I have found no major flaws yet (ie. no data corruption), every few minutes (maybe 2, maybe 30) the system seems to hang for a while (about 10-30 sec). Apparently, the problem is that the ata driver is not fully compatible with the chipset. Examining dmesg's output, every time a hang happens the following lines appear: [17186864.708000] ata1 is slow to respond, please be patient [17186889.664000] ata1: command 0xa0 timeout, stat 0xd0 host_stat 0x60 [17186889.664000] ata1: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00 [17186889.664000] ATA: abnormal status 0xD0 on port 0x1F7 [17186891.016000] ata1: status=0x50 { DriveReady SeekComplete } [17186891.016000] sda: Current: sense key: No Sense [17186891.016000] Additional sense: No additional sense information [17186891.020000] sr0: CDROM (ioctl) error, command: <6>Read TOC/PMA/ATIP 43 00 00 00 00 00 00 00 0c 40 [17186891.020000] sr: Current [descriptor]: sense key: Aborted Command [17186891.020000] Additional sense: Scsi parity error [17186891.020000] ATA: abnormal status 0xD0 on port 0x1F7 [17186891.020000] ATA: abnormal status 0xD0 on port 0x1F7 The main scheme is always the same: there is an 'ata1 is slow to respond, please be patient', followed by a timeout and a few errors. The CD error message may appear or not; I remember having seen a few different variations (examining /var/log/messages, the "sense key" may be "No sense", "Scsi parity error" or "Aborted command", and there are another slight variations, and the error may come from sda or sr0). The "abnormal status" messages are always there; I have looked around for a reference to what status 0xD0 means, but to no avail. I think what causes the hangs is that the system blocks until a 30 second timeout passes from the "slow to respond" message. I'm using 2.6.15-26-386 (the 686 version caused the laptop to hang at seemingly random times); as revealed by lspci, the controler is: 0000:00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7 Family) Serial ATA Storage Controllers cc=IDE (rev 02) (numeric code 8086:27c4), which apparently should be well supported by ata_piix. I have not yet tried with another Linux distro, but Windows XP does not exhibit that problem. Also, I exchanged the laptop for another because of an unrelated problem and the hangs kept happening. I assume this is due to some kind of bug on the sata controllers and that's why I'm reporting the bug here. Feel free to direct me to any other source and I'll repost. Alternatively, if there was some way to set the 'slow to respond' timeout to a shorter time (5 seconds or so), that would probably be a good enough workaround. I will immediately attach the output of dmesg, lspci and lsmod. Thanks in advance for your help. ** Affects: linux-meta (Ubuntu) Importance: Untriaged Status: Unconfirmed -- ata_piix problem with Intel ICH7 chipset https://launchpad.net/bugs/53754 From depalatis at gmail.com Sat Jul 22 18:44:36 2006 From: depalatis at gmail.com (Mike De Palatis) Date: Sat, 22 Jul 2006 18:44:36 -0000 Subject: [Bug 53757] Slow 2D graphics and high CPU usage when idle References: <20060722184436.11213.99046.malonedeb@gandwana.ubuntu.com> Message-ID: <20060722184436.11213.99046.malonedeb@gandwana.ubuntu.com> Public bug reported: Binary package hint: linux-image-2.6.15-26-686 When using the above kernel, 2D graphics in X lag considerably. E.g., the fading in xscreensaver is much slower than it should be. However, 3D accelerated graphics were not apparently affected. In all cases with X, the fglrx driver was used. Also, CPU usage is anywhere from about 30-- 60% even when idle. The solution was to downgrade to the equivalent -386 kernel. Now the graphics no longer lag, CPU usage is only a few percent when idle, and the booting process is noticeably quicker. This bug seems to also affect linux-image-2.6.15-25-686. I am not sure what the earliest kernel image is that is affected, but I did not notice these problems until recently. ** Affects: linux-source-2.6.15 (Ubuntu) Importance: Untriaged Status: Unconfirmed -- Slow 2D graphics and high CPU usage when idle https://launchpad.net/bugs/53757 From cepe at gmbm.net Sat Jul 22 18:59:13 2006 From: cepe at gmbm.net (=?utf-8?q?Jos=C3=A9_M=2E_L=C3=B3pez-Cepero?=) Date: Sat, 22 Jul 2006 18:59:13 -0000 Subject: [Bug 53754] Re: ata_piix problem with Intel ICH7 chipset References: <20060722182526.11213.79901.malonedeb@gandwana.ubuntu.com> Message-ID: <20060722185913.22384.51384.malone@gangotri.ubuntu.com> lspci -vvvv -- ata_piix problem with Intel ICH7 chipset https://launchpad.net/bugs/53754 From cepe at gmbm.net Sat Jul 22 19:00:26 2006 From: cepe at gmbm.net (=?utf-8?q?Jos=C3=A9_M=2E_L=C3=B3pez-Cepero?=) Date: Sat, 22 Jul 2006 19:00:26 -0000 Subject: [Bug 53754] Re: ata_piix problem with Intel ICH7 chipset References: <20060722182526.11213.79901.malonedeb@gandwana.ubuntu.com> Message-ID: <20060722190026.11169.3389.malone@gandwana.ubuntu.com> /var/log/messages. Search for "ata1 is slow to respond" to locate hangs. -- ata_piix problem with Intel ICH7 chipset https://launchpad.net/bugs/53754 From cepe at gmbm.net Sat Jul 22 18:58:42 2006 From: cepe at gmbm.net (=?utf-8?q?Jos=C3=A9_M=2E_L=C3=B3pez-Cepero?=) Date: Sat, 22 Jul 2006 18:58:42 -0000 Subject: [Bug 53754] Re: ata_piix problem with Intel ICH7 chipset References: <20060722182526.11213.79901.malonedeb@gandwana.ubuntu.com> Message-ID: <20060722185842.11169.27522.malone@gandwana.ubuntu.com> dmesg -- ata_piix problem with Intel ICH7 chipset https://launchpad.net/bugs/53754 From cepe at gmbm.net Sat Jul 22 19:00:50 2006 From: cepe at gmbm.net (=?utf-8?q?Jos=C3=A9_M=2E_L=C3=B3pez-Cepero?=) Date: Sat, 22 Jul 2006 19:00:50 -0000 Subject: [Bug 53754] Re: ata_piix problem with Intel ICH7 chipset References: <20060722182526.11213.79901.malonedeb@gandwana.ubuntu.com> Message-ID: <20060722190050.22384.50002.malone@gangotri.ubuntu.com> lsmod -- ata_piix problem with Intel ICH7 chipset https://launchpad.net/bugs/53754 From cepe at gmbm.net Sat Jul 22 19:02:26 2006 From: cepe at gmbm.net (=?utf-8?q?Jos=C3=A9_M=2E_L=C3=B3pez-Cepero?=) Date: Sat, 22 Jul 2006 19:02:26 -0000 Subject: [Bug 53754] Re: ata_piix problem with Intel ICH7 chipset References: <20060722182526.11213.79901.malonedeb@gandwana.ubuntu.com> Message-ID: <20060722190226.11169.13530.malone@gandwana.ubuntu.com> Sorry - I forgot to mention. I'm using Ubuntu Dapper, freshly installed and with all the updates applied. -- ata_piix problem with Intel ICH7 chipset https://launchpad.net/bugs/53754 From cepe at gmbm.net Sat Jul 22 19:07:52 2006 From: cepe at gmbm.net (=?utf-8?q?Jos=C3=A9_M=2E_L=C3=B3pez-Cepero?=) Date: Sat, 22 Jul 2006 19:07:52 -0000 Subject: [Bug 53754] Re: ata_piix problem with Intel ICH7 chipset References: <20060722182526.11213.79901.malonedeb@gandwana.ubuntu.com> Message-ID: <20060722190752.22448.21900.malone@gangotri.ubuntu.com> And sorry (again). When the CD error occurs, it is always (or at least the times I have noticed) a "read TOC" error such as the one above. But there is no disc in the drive to read the TOC from. I don't know if it is usual to issue read TOC commands in empty drives... -- ata_piix problem with Intel ICH7 chipset https://launchpad.net/bugs/53754 From matthelmke at gmail.com Sat Jul 22 19:18:07 2006 From: matthelmke at gmail.com (matthew) Date: Sat, 22 Jul 2006 19:18:07 -0000 Subject: [Bug 53757] Re: Slow 2D graphics and high CPU usage when idle References: <20060722184436.11213.99046.malonedeb@gandwana.ubuntu.com> Message-ID: <20060722191807.11213.50349.malone@gandwana.ubuntu.com> I believe the problem exists because both the -686 and the -686-smp kernels in the repos are compiled for smp processors. I had the same problem. I guess the best solution would be to go back to having the regular -686 kernel NOT include smp support and have that only in the -686-smp kernel. -- Slow 2D graphics and high CPU usage when idle https://launchpad.net/bugs/53757 From mdz at ubuntu.com Sat Jul 22 21:50:16 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Sat, 22 Jul 2006 21:50:16 -0000 Subject: [Bug 6367] Re: [Bug 6367] EDGY Knot1 livecd FAILS AS WELL on such a system References: <20060102180911.29335.17628.malonedeb@gangotri.ubuntu.com> <20060722181218.11213.77542.malone@gandwana.ubuntu.com> Message-ID: <20060722215016.GB5598@alcor.net> On Sat, Jul 22, 2006 at 06:12:18PM -0000, Paul RIVIER wrote: > A friend of mine has such a config that totally prevented him from booting Dapper from the HDD. He is therefore still in Breezy. > I just asked him to test the Edgy Knot1 livecd and report me if the partitioning part of the installation process was possible, or at least if he can find his HDD in /dev. > > ANSWER : NO !!! Seems as broken as Dapper on that point ! > -> Gparted would hang forever without finding any HDD > -> no /dev/sd* and no /dev/hd* at all > > Is there any other test to do ? No. It will be documented in the release notes when this change is included in a Knot CD. -- - mdz -- udev enumeration should use /sys/bus not /sys/devices https://launchpad.net/bugs/6367 From ben.collins at ubuntu.com Sun Jul 23 01:43:48 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Sun, 23 Jul 2006 01:43:48 -0000 Subject: [Bug 53757] Re: [Bug 53757] Re: Slow 2D graphics and high CPU usage when idle References: <20060722184436.11213.99046.malonedeb@gandwana.ubuntu.com> <20060722191807.11213.50349.malone@gandwana.ubuntu.com> Message-ID: <1153619028.26794.39.camel@grayson> On Sat, 2006-07-22 at 19:18 +0000, matthew wrote: > I believe the problem exists because both the -686 and the -686-smp > kernels in the repos are compiled for smp processors. I had the same > problem. I guess the best solution would be to go back to having the > regular -686 kernel NOT include smp support and have that only in the > -686-smp kernel. Actually, the solution is to just use the -386 kernel. Having a -686 non-smp kernel would not give you any benefit. Also, no, the -686 and -686-smp are not both compiled SMP, simply because there is only one image, and that's -686. It uses SMP-Alternatives to lesson the overhead of running on UP systems. (Yes, there is a linux-686 and linux-686-smp, but those are metapackages, and the latter only exists to help with upgrades). Technically, 90% of people who have a UP system should be running the -386 kernel. -- Slow 2D graphics and high CPU usage when idle https://launchpad.net/bugs/53757 From vyushin at rogers.com Sun Jul 23 02:03:47 2006 From: vyushin at rogers.com (Diman) Date: Sun, 23 Jul 2006 02:03:47 -0000 Subject: [Bug 38865] Re: sky2 driver freezing system after ifdown and ifup References: <20060409125752.32313.97119.malonedeb@gandwana.ubuntu.com> Message-ID: <20060723020347.22448.56327.malone@gangotri.ubuntu.com> Even the most recent kernel 2.6.15-26 doesn't help. I've successfully compiled and installed sk98lin. It works fine ! In order to permanently disable sky2 I've added it to blacklist. I've added sk98lin to /etc/modules. After Dapper is booted sk98lin is loaded. However the network is not active. I have to manually activate it. Please tell me what I have done wrong to permanently load sk98lin ? -- sky2 driver freezing system after ifdown and ifup https://launchpad.net/bugs/38865 From depalatis at gmail.com Sun Jul 23 03:16:44 2006 From: depalatis at gmail.com (Mike De Palatis) Date: Sun, 23 Jul 2006 03:16:44 -0000 Subject: [Bug 53757] Re: Slow 2D graphics and high CPU usage when idle References: <20060722184436.11213.99046.malonedeb@gandwana.ubuntu.com> Message-ID: <20060723031645.22448.89570.malone@gangotri.ubuntu.com> If that is the case, is there documentation somewhere about this? When installing the kernel, the package description does not make note anywhere that "90% of people" shouldn't use this image, it just says which processors it is for. -- Slow 2D graphics and high CPU usage when idle https://launchpad.net/bugs/53757 From simon at dt.net.au Sun Jul 23 03:57:54 2006 From: simon at dt.net.au (Simon Wong) Date: Sun, 23 Jul 2006 03:57:54 -0000 Subject: [Bug 39518] Re: kernel oops in usbserial on ppc with appletouch loaded (palm hotsync attempt) References: <20060414013959.1684.83034.malonedeb@gangotri.ubuntu.com> Message-ID: <20060723035754.22448.36470.malone@gangotri.ubuntu.com> I am having similar trouble using Intel chipset (Pentium M). Happens after a few susscessful syncs: Jul 23 13:28:13 localhost kernel: [17189280.432000] usb 2-2: new full speed USB device using uhci_hcd and address 15 Jul 23 13:28:13 localhost kernel: [17189280.576000] visor 2-2:1.0: Handspring Visor / Palm OS converter detected Jul 23 13:28:13 localhost kernel: [17189280.576000] usb 2-2: Handspring Visor / Palm OS converter now attached to ttyUSB2 Jul 23 13:28:13 localhost kernel: [17189280.576000] usb 2-2: Handspring Visor / Palm OS converter now attached to ttyUSB3 Jul 23 13:28:14 localhost kernel: [17189281.600000] e0f02972 Jul 23 13:28:14 localhost kernel: [17189281.600000] PREEMPT SMP Jul 23 13:28:14 localhost kernel: [17189281.600000] Modules linked in: acpi_sbs i2c_acpi_ec i2c_core battery ac ibm_acpi thermal fan button ipw2100 ieee80211 e1000 michael_mic ieee80211_crypt_tkip usbhid visor usbserial arc4 ieee80211_crypt_wep binfmt_misc rfcomm l2cap bluetooth radeon drm uinput ppdev ipv6 speedstep_centrino cpufreq_userspace cpufreq_stats freq_table cpufreq_powersave cpufreq_ondemand cpufreq_conservative video tc1100_wmi sony_acpi pcc_acpi hotkey dev_acpi container deflate zlib_deflate twofish serpent aes blowfish des sha256 sha1 crypto_null af_key dm_mod md_mod nvram lp ide_scsi scsi_mod af_packet irtty_sir sir_dev nsc_ircc joydev ieee80211_crypt irda pcspkr pcmcia crc_ccitt tsdev parport_pc parport yenta_socket rsrc_nonstatic pcmcia_core psmouse serio_raw snd_intel8x0 snd_ac97_codec snd_ac97_bus snd_pcm_oss snd_mixer_oss snd_pcm snd_timer snd soundcore snd_page_alloc intel_agp agpgart shpchp pci_hotplug evdev ext3 jbd ide_generic ehci_hcd uhci_hcd usbcore ide_cd cdrom ide_disk piix generic pro Jul 23 13:28:14 localhost kernel: essor capability commoncap vga16fb vgastate fbcon tileblit font bitblit softcursor Jul 23 13:28:14 localhost kernel: [17189281.600000] CPU: 0 Jul 23 13:28:14 localhost kernel: [17189281.600000] EIP: 0060:[pg0+548043122/1069167616] Not tainted VLI Jul 23 13:28:14 localhost kernel: [17189281.600000] EFLAGS: 00210246 (2.6.15-26-686) Jul 23 13:28:14 localhost kernel: [17189281.600000] EIP is at serial_ioctl+0x32/0x100 [usbserial] Jul 23 13:28:14 localhost kernel: [17189281.600000] eax: 00000000 ebx: 00000000 ecx: c5d2b840 edx: bfbcf628 Jul 23 13:28:14 localhost kernel: [17189281.600000] esi: 00005401 edi: bfbcf628 ebp: c5d2b840 esp: d153fef8 Jul 23 13:28:14 localhost kernel: [17189281.600000] ds: 007b es: 007b ss: 0068 Jul 23 13:28:14 localhost kernel: [17189281.600000] Process gpilotd (pid: 16382, threadinfo=d153e000 task=ddd50a90) Jul 23 13:28:14 localhost kernel: [17189281.600000] Stack: c0171bf9 c5d2b88c da18b560 c5d2b840 d153ff44 c5d2b840 fffffff8 da7b3000 Jul 23 13:28:14 localhost kernel: [17189281.600000] 00005401 c0242bfb da7b3000 c5d2b840 00005401 bfbcf628 bfbcf628 c5d2b840 Jul 23 13:28:14 localhost kernel: [17189281.600000] da7b3000 c5d2b840 bfbcf628 00005401 00000011 c01880b3 da18b4a8 c5d2b840 Jul 23 13:28:14 localhost kernel: [17189281.600000] Call Trace: Jul 23 13:28:14 localhost kernel: [17189281.600000] [__dentry_open+265/640] __dentry_open+0x109/0x280 Jul 23 13:28:14 localhost kernel: [17189281.600000] [tty_ioctl+171/1456] tty_ioctl+0xab/0x5b0 Jul 23 13:28:14 localhost kernel: [17189281.600000] [do_ioctl+147/160] do_ioctl+0x93/0xa0 Jul 23 13:28:14 localhost kernel: [17189281.600000] [vfs_ioctl+107/560] vfs_ioctl+0x6b/0x230 Jul 23 13:28:14 localhost kernel: [17189281.600000] [fd_install+50/112] fd_install+0x32/0x70 Jul 23 13:28:14 localhost kernel: [17189281.600000] [sys_ioctl+136/160] sys_ioctl+0x88/0xa0 Jul 23 13:28:14 localhost kernel: [17189281.600000] [sysenter_past_esp+84/117] sysenter_past_esp+0x54/0x75 Jul 23 13:28:14 localhost kernel: [17189281.600000] Code: 89 74 24 18 8b 74 24 30 89 7c 24 1c 8b 7c 24 34 89 6c 24 20 8b 6c 24 2c 89 5c 24 14 8b 98 94 09 00 00 a1 84 9d f0 e0 85 c0 75 6e <8b> 8b 94 00 00 00 85 c9 75 27 8b 15 84 9d f0 e0 b8 ed ff ff ff Jul 23 13:28:21 localhost kernel: [17189281.600000] <6>usb 2-2: USB disconnect, address 15 Jul 23 13:28:21 localhost kernel: [17189288.508000] visor ttyUSB2: Handspring Visor / Palm OS converter now disconnected from ttyUSB2 Jul 23 13:28:21 localhost kernel: [17189288.508000] visor ttyUSB3: Handspring Visor / Palm OS converter now disconnected from ttyUSB3 Jul 23 13:28:21 localhost kernel: [17189288.508000] visor 2-2:1.0: device disconnected Jul 23 13:33:27 localhost shutdown[4720]: shutting down for system reboot After a reboot I can sync again. Please fix this, Palm synchronisation is very important for Ubuntu Desktop usage particular in Corporate environments. -- kernel oops in usbserial on ppc with appletouch loaded (palm hotsync attempt) https://launchpad.net/bugs/39518 From c.charlot at freesurf.fr Sun Jul 23 07:39:32 2006 From: c.charlot at freesurf.fr (Christophe Charlot) Date: Sun, 23 Jul 2006 07:39:32 -0000 Subject: [Bug 45928] Re: High error rate on UMTS modem References: <20060521215943.23797.25678.malonedeb@gandwana.ubuntu.com> Message-ID: <20060723073932.11169.45143.malone@gandwana.ubuntu.com> As specified in bug #42578, this is a kernel bug. It seems that kernel from 2.6.13 up ti 2.6.15 have a broken pp support. I have compiled a custom 2.6.17 kernel, and my UMTS modem is working again. I think now all we have to do is wait for ubuntu to have a 2.6.16+ kernel. I suppose it will be ok with edgy (2.6.17 kernel) ** Bug 42578 has been marked a duplicate of this bug -- High error rate on UMTS modem https://launchpad.net/bugs/45928 From c.charlot at freesurf.fr Sun Jul 23 07:35:35 2006 From: c.charlot at freesurf.fr (Christophe Charlot) Date: Sun, 23 Jul 2006 07:35:35 -0000 Subject: [Bug 42578] Re: 2.6.1[3-5] doesn't support merlin u530 cards dues to broken ppp support References: <20060502133814.30606.12639.malonedeb@gangotri.ubuntu.com> Message-ID: <20060723073535.11213.85028.malone@gandwana.ubuntu.com> *** This bug is a duplicate of bug 45928 *** Confirmed as a dupe of bug #45928 ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Unconfirmed => Confirmed ** This bug has been marked a duplicate of bug 45928 High error rate on UMTS modem -- 2.6.1[3-5] doesn't support merlin u530 cards dues to broken ppp support https://launchpad.net/bugs/42578 From nick at nedrichards.com Sun Jul 23 09:21:49 2006 From: nick at nedrichards.com (Nick Richards) Date: Sun, 23 Jul 2006 09:21:49 -0000 Subject: [Bug 33609] Re: ACX111 driver loads wrong firmware by default References: <20060303183031.17525.86797.malonedeb@gangotri.ubuntu.com> Message-ID: <20060723092149.11169.63704.launchpad@gandwana.ubuntu.com> *** This bug is a duplicate of bug 30766 *** ** This bug is no longer a duplicate of bug 26703 ACX Drivers -- needs updating. ** This bug has been marked a duplicate of bug 30766 [acx111] default firmware not working for acx d-link dwl-g650+ -- ACX111 driver loads wrong firmware by default https://launchpad.net/bugs/33609 From nick at nedrichards.com Sun Jul 23 09:21:49 2006 From: nick at nedrichards.com (Nick Richards) Date: Sun, 23 Jul 2006 09:21:49 -0000 Subject: [Bug 30766] Re: [acx111] default firmware not working for acx d-link dwl-g650+ References: <20060207221213.32736.87495.malonedeb@gandwana.ubuntu.com> Message-ID: <20060723092149.11169.97734.launchpad@gandwana.ubuntu.com> ** Bug 33609 has been marked a duplicate of this bug ** Bug 26703 has been marked a duplicate of this bug -- [acx111] default firmware not working for acx d-link dwl-g650+ https://launchpad.net/bugs/30766 From nick at nedrichards.com Sun Jul 23 09:20:51 2006 From: nick at nedrichards.com (Nick Richards) Date: Sun, 23 Jul 2006 09:20:51 -0000 Subject: [Bug 26703] Re: ACX Drivers -- needs updating. References: <20060113145051.21012.52657.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060723092051.11169.25722.malone@gandwana.ubuntu.com> *** This bug is a duplicate of bug 30766 *** I think this has been fixed by bug 30766. ** This bug has been marked a duplicate of bug 30766 [acx111] default firmware not working for acx d-link dwl-g650+ -- ACX Drivers -- needs updating. https://launchpad.net/bugs/26703 From nick at nickhill.co.uk Sun Jul 23 09:35:36 2006 From: nick at nickhill.co.uk (Nick_Hill) Date: Sun, 23 Jul 2006 09:35:36 -0000 Subject: [Bug 34902] Re: Ralink Wireless USB/PCMCIA/PCI hangs PC References: <20060314143545.30082.52680.malonedeb@gandwana.ubuntu.com> Message-ID: <20060723093536.22448.80051.malone@gangotri.ubuntu.com> Hello Dimitri I am making the point that whether using an older or newer version of the kernel, whether 386 or 686, it works for me. Of course, this doesn't immediately help you if it isn't working for you. But at least the developer knows that there are platforms where it works perfectly, and that it isn't an issue of kernel compilation optimisation. It also lets the developer know that the existing kernel module is very useful to those for whom it works. After all, the developer will normally get comments from those who are having a problem with this module, and is less likely to get a comment from those who are not having trouble. This has 2 effects: 1)The developer can look at the hardware differences to help identify the bug, perhaps it is a dual cpu problem, or a cardbus bridge problem? 2)Lets the developer know not to delete the driver as doing so will inconvenience many users. I have used this driver on two other systems, and each time, it has worked perfectly. In my experience of this driver with the Asus WL107G, it appears failure is the exception rather than the rule. -- Ralink Wireless USB/PCMCIA/PCI hangs PC https://launchpad.net/bugs/34902 From bernado_tornado at gmx.de Sun Jul 23 11:07:56 2006 From: bernado_tornado at gmx.de (=?utf-8?q?=22Kosmonaut=22_Bernd_M=C3=BCller?=) Date: Sun, 23 Jul 2006 11:07:56 -0000 Subject: =?utf-8?q?=5BBug_53813=5D_kernel_doesn=C2=B4t_support_Sony_dsc-w?= =?utf-8?q?5_anymore?= References: <20060723110756.11169.28683.malonedeb@gandwana.ubuntu.com> Message-ID: <20060723110756.11169.28683.malonedeb@gandwana.ubuntu.com> Public bug reported: Binary package hint: kernel-image-2.6.15-26-386-di Since the newest kernelupdate 2.6.15-26, I´m not able to connect my camera to my linux system via usb. There is no way to plug&play the camera. Still the camera is detected from the system ->/var/log/messages says: Quote: Jul 17 16:00:53 localhost kernel: [17180760.112000] usb 1-1: new high speed USB device using ehci_hcd and address 5 Jul 17 16:01:05 localhost kernel: [17180771.768000] usb 1-1: new high speed USB device using ehci_hcd and address 6 Before that kernel-update everything worked fine. (->with kernel 2.6.15.23 there was no problem: plug&play worked fine) Removing: the ehci_hcd module solved the problem (sudo rmmod ehci_hcd) I guess that the ehci_hcd module is the troublemaker. Greetings Bernd! ** Affects: linux-source-2.6.15 (Ubuntu) Importance: Untriaged Status: Unconfirmed -- kernel doesn´t support Sony dsc-w5 anymore https://launchpad.net/bugs/53813 From ubuntu at skwashd.com Sun Jul 23 11:56:43 2006 From: ubuntu at skwashd.com (Dave Hall) Date: Sun, 23 Jul 2006 11:56:43 -0000 Subject: [Bug 45928] Re: High error rate on UMTS modem References: <20060521215943.23797.25678.malonedeb@gandwana.ubuntu.com> Message-ID: <20060723115643.11213.12449.malone@gandwana.ubuntu.com> What are the chances of getting the fix linked from bug #42578 backported, given that a full backport of a new kernel has been ruled out? I tried doing it myself but there were too many conflicts for a C n00b like myself to be able to deal with. -- High error rate on UMTS modem https://launchpad.net/bugs/45928 From constantine at evanslabs.org Sun Jul 23 20:09:39 2006 From: constantine at evanslabs.org (Constantine Evans) Date: Sun, 23 Jul 2006 20:09:39 -0000 Subject: [Bug 36014] Re: kernel can't scale cpu frequency References: <20060322140248.30471.37870.malonedeb@gangotri.ubuntu.com> Message-ID: <20060723200939.2127.32606.malone@gandwana.ubuntu.com> My problem was that this was happening with all kernels that I tried (386, 686, etc), and fixing it required hackish modification of the _PPC frequency limiting code, to stop it from incorrectly limiting. It appears that this bug is now gone as of 2.6.17-2 in Edgy, but I can't say for sure. The description in the patch for 2.6.17 is useful, reading it carefully makes it seem to me like the bug didn't manifest itself in Ubuntu because of a change in the kernel, but instead because of a change in something like init script timing, and also that the problem can appear somewhat randomly. As far as I know, the bug is not fixed for Dapper however, and my attempt to backport the 2.6.17-rc2 patch didn't seem to work. I might try it again in a few days. -- kernel can't scale cpu frequency https://launchpad.net/bugs/36014 From emisca at rocketmail.com Sun Jul 23 22:09:23 2006 From: emisca at rocketmail.com (Emilio Scalise) Date: Sun, 23 Jul 2006 22:09:23 -0000 Subject: [Bug 53308] Re: having usb modules loaded may cause failure to resume from disk References: <20060717220711.1979.68755.malonedeb@gangotri.ubuntu.com> Message-ID: <20060723220923.2461.61671.malone@gangotri.ubuntu.com> You can find another user that have the same problem... http://www.mail-archive.com/laptop-testing-team at lists.ubuntu.com/msg00742.html Jun 4 00:29:28 aidualc kernel: [4294885.180000] ehci_hcd 0000:00:1d.7: EHCI Host Controller Jun 4 00:29:28 aidualc kernel: [4294885.181000] ehci_hcd 0000:00:1d.7: debug port 15 IN USE Jun 4 00:29:28 aidualc kernel: [4294885.181000] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 Jun 4 00:29:28 aidualc kernel: [4294885.205000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 Jun 4 00:29:28 aidualc kernel: [4294885.205000] ehci_hcd 0000:00:1d.7: irq 66, io mem 0xee444000 Jun 4 00:29:28 aidualc kernel: [4294885.205000] ehci_hcd 0000:00:1d.7: startup error -19 Jun 4 00:29:28 aidualc kernel: [4294885.205000] ehci_hcd 0000:00:1d.7: USB bus 1 deregistered Jun 4 00:29:28 aidualc kernel: [4294885.206000] ACPI: PCI interrupt for device 0000:00:1d.7 disabled Jun 4 00:29:28 aidualc kernel: [4294885.206000] ehci_hcd 0000:00:1d.7: init 0000:00:1d.7 fail, -19 It's the same error I have fixed........ -- having usb modules loaded may cause failure to resume from disk https://launchpad.net/bugs/53308 From daniel at rimspace.net Mon Jul 24 00:56:45 2006 From: daniel at rimspace.net (Daniel Pittman) Date: Mon, 24 Jul 2006 00:56:45 -0000 Subject: [Bug 53835] ACPI startup causes unhandled IRQ. References: <20060724005645.2127.37912.malonedeb@gandwana.ubuntu.com> Message-ID: <20060724005645.2127.37912.malonedeb@gandwana.ubuntu.com> Public bug reported: Binary package hint: linux-image-2.6.15-26-686 With the latest kernel update for Dapper, and I believe the one prior to it, the ACPI startup causes IRQ9 to be issues. Nothing handles the interrupt, leading to the kernel disabling the IRQ, and consequently ACPI, wifi, and some of my USB hardware not functoning correctly. I am not sure exactly which kernel version caused this because I don't actually /use/ much of that hardware routinely, I fear. It is a recent development, though, and is definitely present in the latest (-26) release of the kernel. The hardware is an IBM A31p Thinkpad laptop. The latest firmware updates have been applied, which was over a year ago now IIRC. The hardware has been very stable up to now. This looks to me like some change in IRQ handling causes the ACPI interrupt to issue at registration time, before the acpi IRQ handler is fully registered. The dmesg trace of this is: [17179572.376000] ACPI: Subsystem revision 20051216 [17179585.040000] irq 9: nobody cared (try booting with the "irqpoll" option) [17179585.040000] [] __report_bad_irq+0x2a/0xa0 [17179585.040000] [] note_interrupt+0x87/0xf0 [17179585.040000] [] __do_IRQ+0xfd/0x110 [17179585.040000] [] do_IRQ+0x19/0x30 [17179585.040000] [] common_interrupt+0x1a/0x20 [17179585.040000] [] __do_softirq+0x5f/0xe0 [17179585.040000] [] __do_IRQ+0xcc/0x110 [17179585.040000] [] do_softirq+0x35/0x40 [17179585.040000] [] irq_exit+0x45/0x50 [17179585.040000] [] do_IRQ+0x1e/0x30 [17179585.040000] [] common_interrupt+0x1a/0x20 [17179585.040000] [] _spin_unlock_irqrestore+0x6/0x20 [17179585.040000] [] setup_irq+0xc9/0x120 [17179585.040000] [] acpi_irq+0x0/0x16 [17179585.040000] [] request_irq+0xaa/0xd0 [17179585.040000] [] acpi_os_install_interrupt_handler+0x56/0x80 [17179585.040000] [] acpi_irq+0x0/0x16 [17179585.040000] [] acpi_irq+0x0/0x16 [17179585.040000] [] acpi_ev_install_sci_handler+0x1a/0x1e [17179585.040000] [] acpi_ev_sci_xrupt_handler+0x0/0x18 [17179585.040000] [] acpi_ev_install_xrupt_handlers+0x6/0x68 [17179585.040000] [] acpi_enable_subsystem+0x63/0x79 [17179585.040000] [] acpi_bus_init+0xc/0x8e [17179585.040000] [] acpi_init+0x35/0xb0 [17179585.040000] [] do_initcalls+0x54/0xd0 [17179585.040000] [] netfilter_init+0x65/0xa0 [17179585.040000] [] init+0x75/0x200 [17179585.040000] [] init+0x0/0x200 [17179585.040000] [] kernel_thread_helper+0x5/0x10 [17179585.040000] handlers: [17179585.040000] [] (acpi_irq+0x0/0x16) [17179585.040000] Disabling IRQ #9 I can supply further details, if needed. I have also had some (limited) kernel development experience before, so can cope with things like enabling debugging and patch the system if you need me to. ** Affects: linux-source-2.6.15 (Ubuntu) Importance: Untriaged Status: Unconfirmed -- ACPI startup causes unhandled IRQ. https://launchpad.net/bugs/53835 From zanglang at gmail.com Mon Jul 24 04:35:19 2006 From: zanglang at gmail.com (Jerry Chong) Date: Mon, 24 Jul 2006 04:35:19 -0000 Subject: [Bug 30766] Re: [acx111] default firmware not working for acx d-link dwl-g650+ References: <20060207221213.32736.87495.malonedeb@gandwana.ubuntu.com> Message-ID: <20060724043519.2127.69969.malone@gandwana.ubuntu.com> Hmm, doesn't appear to be fixed yet on Dapper linux-2.6.15.26-386 yet. `iwlist scanning` still returns no results? ----------------------------------------- tail -f /var/log/messages shows: Jul 24 14:23:53 localhost kernel: [17179839.608000] pccard: CardBus card inserted into slot 0 Jul 24 14:23:53 localhost kernel: [17179839.608000] PCI: Enabling device 0000:03:00.0 (0000 -> 0002) Jul 24 14:23:53 localhost kernel: [17179839.608000] ACPI: PCI Interrupt 0000:03:00.0[A] -> Link [LNKD] -> GSI 10 (level, low) -> IRQ 10 Jul 24 14:23:53 localhost kernel: [17179839.608000] acx: found ACX111-based wireless network card at 0000:03:00.0, irq:10, phymem1:0x34020000, phymem2:0x34000000, mem1:0xe0c3c000, mem1_size:8192, mem2:0xe0d00000, mem2_size:131072 Jul 24 14:23:54 localhost kernel: [17179840.380000] acx: firmware 'Rev 2.3.1.31' does not work well with this driver Jul 24 14:23:54 localhost kernel: [17179840.380000] acx: form factor 0x01 ((mini-)PCI / CardBus), radio type 0x16 (Radia), EEPROM version 0x05, uploaded firmware 'Rev 2.3.1.31' (0x03010101) Jul 24 14:23:54 localhost kernel: [17179840.380000] acx v0.3.21: net device wlan0, driver compiled against wireless extensions 19 and Linux 2.6.15-26-386 Jul 24 14:23:55 localhost kernel: [17179840.864000] ADDRCONF(NETDEV_UP): wlan0: link is not ready --------------------------------------- lspci -vv outputs: 0000:03:00.0 Network controller: Texas Instruments ACX 111 54Mbps Wireless Interface Subsystem: D-Link System Inc DWL-G650+ AirPlusG+ CardBus Wireless LAN Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- Message-ID: <20060724043727.2083.68962.malone@gandwana.ubuntu.com> *** This bug is a duplicate of bug 30766 *** Oddly enough my G650+ still doesn't work as well on 2.6.15-26... confirmation anyone? -- ACX Drivers -- needs updating. https://launchpad.net/bugs/26703 From jean-marc.valin at usherbrooke.ca Mon Jul 24 05:58:05 2006 From: jean-marc.valin at usherbrooke.ca (jmspeex) Date: Mon, 24 Jul 2006 05:58:05 -0000 Subject: [Bug 53857] Weird X bug with 686 build References: <20060724055806.2505.25872.malonedeb@gangotri.ubuntu.com> Message-ID: <20060724055806.2505.25872.malonedeb@gangotri.ubuntu.com> Public bug reported: Binary package hint: linux-image-2.6.15-26-686 I just discovered a very strange bug in the 686 kernel build. If I boot that kernel, the X server ends up eating about 50% CPU, even when idle. This slows down the machine dramatically. What's even stranger is that, while "top" reports that the total "user CPU%" is around 50%, all the processes it shows are using almost no CPU time. However, if I use htop instead, then I see X using all that CPU. If I run the 386 kernel, everything is fine. The problem is 100% reproducible (as soon as I boot) on the 686 kernel. My setup is: Ubuntu Dapper Dell D600 laptop Pentium-M 2.13 GHz / 1 GB RAM ATI video card (X.org reports "Chipset ATI Radeon Mobility X600 (M24) 3150 (PCIE)") Using the open-source "ati" driver Kernel is *NOT* tainted ** Affects: linux-source-2.6.15 (Ubuntu) Importance: Untriaged Status: Unconfirmed -- Weird X bug with 686 build https://launchpad.net/bugs/53857 From bugwatch at bugs.launchpad.net Mon Jul 24 06:30:19 2006 From: bugwatch at bugs.launchpad.net (Bug Watch Updater) Date: Mon, 24 Jul 2006 06:30:19 -0000 Subject: [Bug 7497] Re: kernel-image-2.6.8-1-686: unable to install kernel image because of failure with mkinitrd References: <20060113125731.21012.27726.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060724063122.28693.54468.launchpad@gangotri.ubuntu.com> ** Changed in: linux-source-2.6.15 (Debian) Status: Needs Info => Fix Released -- kernel-image-2.6.8-1-686: unable to install kernel image because of failure with mkinitrd https://launchpad.net/bugs/7497 From sjt at star.sr.bham.ac.uk Mon Jul 24 10:59:12 2006 From: sjt at star.sr.bham.ac.uk (jtappin) Date: Mon, 24 Jul 2006 10:59:12 -0000 Subject: [Bug 53882] Corrupted output on external monitor/projector for iBook References: <20060724105913.2505.44401.malonedeb@gangotri.ubuntu.com> Message-ID: <20060724105913.2505.44401.malonedeb@gangotri.ubuntu.com> Public bug reported: Binary package hint: linux-image-2.6.15-26-powerpc On all 2.6.* kernels up to and including 2.6.15 (I've not tested anything later) the output from the external monitor port on an iBook is corrupted (the exact form has varied over versions, on the current version I get random pixel displacements which flicker a bit like a swarm of midges around the proper output). ** Affects: linux-source-2.6.15 (Ubuntu) Importance: Untriaged Status: Unconfirmed -- Corrupted output on external monitor/projector for iBook https://launchpad.net/bugs/53882 From sjt at star.sr.bham.ac.uk Mon Jul 24 11:02:02 2006 From: sjt at star.sr.bham.ac.uk (jtappin) Date: Mon, 24 Jul 2006 11:02:02 -0000 Subject: [Bug 53882] Re: Corrupted output on external monitor/projector for iBook References: <20060724105913.2505.44401.malonedeb@gangotri.ubuntu.com> Message-ID: <20060724110202.2083.93517.malone@gandwana.ubuntu.com> The attached patch (which I adapted from a fix for 2.4 kernels that I found -- sorry I've lost the original reference now) fixes the corruption. P.S. Why can't I attach a file to the original report? -- Corrupted output on external monitor/projector for iBook https://launchpad.net/bugs/53882 From andrew.bennetts at canonical.com Mon Jul 24 13:12:45 2006 From: andrew.bennetts at canonical.com (Andrew Bennetts) Date: Mon, 24 Jul 2006 13:12:45 -0000 Subject: [Bug 53757] Re: Slow 2D graphics and high CPU usage when idle References: <20060722184436.11213.99046.malonedeb@gandwana.ubuntu.com> Message-ID: <20060724131245.2505.92761.malone@gangotri.ubuntu.com> Is this a dupe of bug 30557? -- Slow 2D graphics and high CPU usage when idle https://launchpad.net/bugs/53757 From bjoern at boschman.de Mon Jul 24 13:30:54 2006 From: bjoern at boschman.de (jessy) Date: Mon, 24 Jul 2006 13:30:54 -0000 Subject: [Bug 37452] Re: fusion mpt sas driver does not find a RAID1 disk during installation(Sun Galaxy X4200 and X4100) References: <20060331083135.5415.666.malonedeb@gangotri.ubuntu.com> Message-ID: <20060724133054.2083.73686.malone@gandwana.ubuntu.com> Hi, as this bug is currently in status "Needs Info" I would like to know which infos are manditory to support this kind of hardware raid? It is enough to take the changes made on the fusion driver between 2.6.15.x and 2.6.16.0 Any more infos needed? -- fusion mpt sas driver does not find a RAID1 disk during installation(Sun Galaxy X4200 and X4100) https://launchpad.net/bugs/37452 From matthelmke at gmail.com Mon Jul 24 13:39:07 2006 From: matthelmke at gmail.com (matthew) Date: Mon, 24 Jul 2006 13:39:07 -0000 Subject: [Bug 53757] Re: Slow 2D graphics and high CPU usage when idle References: <20060722184436.11213.99046.malonedeb@gandwana.ubuntu.com> Message-ID: <20060724133907.2127.12238.malone@gandwana.ubuntu.com> re: dupe of 30557 I don't think so. I am only affected when using the 686 kernel, not the 386 kernel. Oddly enough, prior to 2.6.15 I used the 686 kernel with great results on my Pentium M, but now I can't. However, the 386 kernel works great for me with 2.6.15 -- Slow 2D graphics and high CPU usage when idle https://launchpad.net/bugs/53757 From ferhatayaz at yahoo.com Mon Jul 24 14:19:25 2006 From: ferhatayaz at yahoo.com (snowdrop) Date: Mon, 24 Jul 2006 14:19:25 -0000 Subject: [Bug 35197] Re: powerbook fails to suspend when the is lid closed References: <20060316142811.6510.81484.malonedeb@gangotri.ubuntu.com> Message-ID: <20060724141925.2505.54501.malone@gangotri.ubuntu.com> Hi DC, have you a nvida GeForce 5200 GO? This is my case and my PowerBook does not sleep :( -- powerbook fails to suspend when the is lid closed https://launchpad.net/bugs/35197 From frogzoo at chilli.net.au Mon Jul 24 14:23:57 2006 From: frogzoo at chilli.net.au (frogzoo) Date: Mon, 24 Jul 2006 14:23:57 -0000 Subject: [Bug 53898] Re: upgrading to 2.6.15-26 in Dapper causes graphics slowdown References: <20060724140315.2083.70946.malonedeb@gandwana.ubuntu.com> Message-ID: <20060724142357.2127.69190.malone@gandwana.ubuntu.com> *** This bug is a duplicate of bug 51576 *** Is this with the unsupported fglrx driver, or the stock ati? The fglrx causes extreme slowdown of glx screensavers. It' s a known issue, but the driver's not supported. ** Changed in: Ubuntu Status: Unconfirmed => Needs Info -- upgrading to 2.6.15-26 in Dapper causes graphics slowdown https://launchpad.net/bugs/53898 From depalatis at gmail.com Mon Jul 24 14:23:11 2006 From: depalatis at gmail.com (Mike De Palatis) Date: Mon, 24 Jul 2006 14:23:11 -0000 Subject: [Bug 53757] Re: Slow 2D graphics and high CPU usage when idle References: <20060722184436.11213.99046.malonedeb@gandwana.ubuntu.com> Message-ID: <20060724142311.2083.43281.malone@gandwana.ubuntu.com> *** This bug is a duplicate of bug 51576 *** I also had no problem with the -686 kernels for a while, though I'm not sure precisely when this became a problem. It is very likely that as you say, only the 2.6.15 kernels are affected. -- Slow 2D graphics and high CPU usage when idle https://launchpad.net/bugs/53757 From frogzoo at chilli.net.au Mon Jul 24 14:29:46 2006 From: frogzoo at chilli.net.au (frogzoo) Date: Mon, 24 Jul 2006 14:29:46 -0000 Subject: [Bug 53898] Re: upgrading to 2.6.15-26 in Dapper causes graphics slowdown References: <20060724140315.2083.70946.malonedeb@gandwana.ubuntu.com> Message-ID: <20060724142946.2127.28337.launchpad@gandwana.ubuntu.com> *** This bug is a duplicate of bug 51576 *** ** This bug has been marked a duplicate of bug 51576 rss-glx really slow (only 1-2fps) since recent fglrx driver update -- upgrading to 2.6.15-26 in Dapper causes graphics slowdown https://launchpad.net/bugs/53898 From frogzoo at chilli.net.au Mon Jul 24 14:29:09 2006 From: frogzoo at chilli.net.au (frogzoo) Date: Mon, 24 Jul 2006 14:29:09 -0000 Subject: [Bug 53757] Re: Slow 2D graphics and high CPU usage when idle References: <20060722184436.11213.99046.malonedeb@gandwana.ubuntu.com> Message-ID: <20060724142909.2461.13479.launchpad@gangotri.ubuntu.com> *** This bug is a duplicate of bug 51576 *** ** This bug has been marked a duplicate of bug 51576 rss-glx really slow (only 1-2fps) since recent fglrx driver update -- Slow 2D graphics and high CPU usage when idle https://launchpad.net/bugs/53757 From frogzoo at chilli.net.au Mon Jul 24 14:29:09 2006 From: frogzoo at chilli.net.au (frogzoo) Date: Mon, 24 Jul 2006 14:29:09 -0000 Subject: [Bug 51576] Re: rss-glx really slow (only 1-2fps) since recent fglrx driver update References: <20060702093719.17054.49206.malonedeb@gangotri.ubuntu.com> Message-ID: <20060724142909.2461.94106.launchpad@gangotri.ubuntu.com> ** Bug 53757 has been marked a duplicate of this bug ** Bug 53898 has been marked a duplicate of this bug -- rss-glx really slow (only 1-2fps) since recent fglrx driver update https://launchpad.net/bugs/51576 From shapiro at math.umass.edu Mon Jul 24 14:34:50 2006 From: shapiro at math.umass.edu (geos) Date: Mon, 24 Jul 2006 14:34:50 -0000 Subject: [Bug 53898] Re: [Bug 53898] Re: upgrading to 2.6.15-26 in Dapper causes graphics slowdown References: <20060724140315.2083.70946.malonedeb@gandwana.ubuntu.com> <20060724142357.2127.69190.malone@gandwana.ubuntu.com> Message-ID: *** This bug is a duplicate of bug 51576 *** My machine is using Intel 950 graphics so I can't imagine what it has to do with fglrx On Mon, 24 Jul 2006, frogzoo wrote: > *** This bug is a duplicate of bug 51576 *** > > Is this with the unsupported fglrx driver, or the stock ati? > > The fglrx causes extreme slowdown of glx screensavers. It' s a known > issue, but the driver's not supported. > > ** Changed in: Ubuntu > Status: Unconfirmed => Needs Info > > -- > upgrading to 2.6.15-26 in Dapper causes graphics slowdown > https://launchpad.net/bugs/53898 > -- upgrading to 2.6.15-26 in Dapper causes graphics slowdown https://launchpad.net/bugs/53898 From shapiro at math.umass.edu Mon Jul 24 14:38:19 2006 From: shapiro at math.umass.edu (geos) Date: Mon, 24 Jul 2006 14:38:19 -0000 Subject: [Bug 53757] Re: [Bug 53757] Re: Slow 2D graphics and high CPU usage when idle References: <20060722184436.11213.99046.malonedeb@gandwana.ubuntu.com> <20060724142311.2083.43281.malone@gandwana.ubuntu.com> Message-ID: *** This bug is a duplicate of bug 51576 *** actually, 2.6.15-23 seems to work fine it just seems like a problem with -26. Also, this is not a GL problem since regular dekstop 2D animations are badly affected... On Mon, 24 Jul 2006, Mike De Palatis wrote: > *** This bug is a duplicate of bug 51576 *** > > I also had no problem with the -686 kernels for a while, though I'm not > sure precisely when this became a problem. It is very likely that as you > say, only the 2.6.15 kernels are affected. > > -- > Slow 2D graphics and high CPU usage when idle > https://launchpad.net/bugs/53757 > -- Slow 2D graphics and high CPU usage when idle https://launchpad.net/bugs/53757 From matthelmke at gmail.com Mon Jul 24 14:42:01 2006 From: matthelmke at gmail.com (matthew) Date: Mon, 24 Jul 2006 14:42:01 -0000 Subject: [Bug 53898] Re: [Bug 53898] Re: upgrading to 2.6.15-26 in Dapper causes graphics slowdown References: <20060724140315.2083.70946.malonedeb@gandwana.ubuntu.com> <20060724142357.2127.69190.malone@gandwana.ubuntu.com> Message-ID: <1153752121.11336.4.camel@localhost.localdomain> *** This bug is a duplicate of bug 51576 *** On Mon, 2006-07-24 at 14:23 +0000, frogzoo wrote: > *** This bug is a duplicate of bug 51576 *** > > Is this with the unsupported fglrx driver, or the stock ati? > > The fglrx causes extreme slowdown of glx screensavers. It' s a known > issue, but the driver's not supported. > > ** Changed in: Ubuntu > Status: Unconfirmed => Needs Info > I'm using the fglrx driver from the Ubuntu repos, not the Seveas one. -- upgrading to 2.6.15-26 in Dapper causes graphics slowdown https://launchpad.net/bugs/53898 From shapiro at math.umass.edu Mon Jul 24 14:43:17 2006 From: shapiro at math.umass.edu (geos) Date: Mon, 24 Jul 2006 14:43:17 -0000 Subject: [Bug 53757] Re: Slow 2D graphics and high CPU usage when idle References: <20060722184436.11213.99046.malonedeb@gandwana.ubuntu.com> Message-ID: <20060724144317.2083.48440.malone@gandwana.ubuntu.com> *** This bug is a duplicate of bug 51576 *** I have the same problem (bug #53598) with Intel 950 graphics on a Core Duo laptop (ThinkPad X60s). It is not a GL problem since it affects Desktop animations. It seems to be a problem with the 2.6.15-26 kernel but it is much MUCH worse with 2.6.15-26 686 than 2.6.15.26 386 (in my experience.) let me repeat, it has nothing to do with GL... -- Slow 2D graphics and high CPU usage when idle https://launchpad.net/bugs/53757 From shapiro at math.umass.edu Mon Jul 24 14:44:33 2006 From: shapiro at math.umass.edu (geos) Date: Mon, 24 Jul 2006 14:44:33 -0000 Subject: [Bug 53757] Re: Slow 2D graphics and high CPU usage when idle References: <20060722184436.11213.99046.malonedeb@gandwana.ubuntu.com> Message-ID: <20060724144433.2127.38718.malone@gandwana.ubuntu.com> *** This bug is a duplicate of bug 51576 *** sorry that should be bug #53898 -- Slow 2D graphics and high CPU usage when idle https://launchpad.net/bugs/53757 From joe at brokedown.net Mon Jul 24 14:40:32 2006 From: joe at brokedown.net (Squash) Date: Mon, 24 Jul 2006 14:40:32 -0000 Subject: [Bug 36461] Re: XOrg dualhead regression References: <20060324174628.6253.87338.malonedeb@gandwana.ubuntu.com> Message-ID: <20060724144032.2461.55634.malone@gangotri.ubuntu.com> This is affecting me as well. Booting the breezy kernel 2.6.12-10-386 gets it working again. My cards: 0000:01:00.0 VGA compatible controller: nVidia Corporation NV6 [Vanta/Vanta LT] (rev 15) 0000:02:09.0 VGA compatible controller: Silicon Integrated Systems [SiS] 300/305 PCI/AGP VGA Display Adapter (rev 90) Pertinant parts of X log: (II) Reloading /usr/lib/xorg/modules/libint10.so Requesting insufficient memory window!: start: 0xf0000000 end: 0xf7ffffff size 0xfe010000 Requesting insufficient memory window!: start: 0xfe000000 end: 0xfe2fffff size 0xfe010000 Requesting insufficient memory window!: start: 0xf0000000 end: 0xf7ffffff size 0xfe010000 Requesting insufficient memory window!: start: 0xfe000000 end: 0xfe2fffff size 0xfe010000 Requesting insufficient memory window!: start: 0xf0000000 end: 0xf7ffffff size 0xfe010000 Requesting insufficient memory window!: start: 0xfe000000 end: 0xfe2fffff size 0xfe010000 (EE) SIS(0): Cannot read V_BIOS (--) SIS(0): Relocated I/O registers at 0x1000 Requesting insufficient memory window!: start: 0xf0000000 end: 0xf7ffffff size 0xfe010000 Requesting insufficient memory window!: start: 0xfe000000 end: 0xfe2fffff size 0xfe010000 Requesting insufficient memory window!: start: 0xf0000000 end: 0xf7ffffff size 0xfe010000 Requesting insufficient memory window!: start: 0xfe000000 end: 0xfe2fffff size 0xfe010000 (WW) SIS(0): Could not find/read video BIOS (EE) SIS(0): ************************************************** (EE) SIS(0): ERROR: (EE) SIS(0): Virtual screen too big for memory; 937K needed, 508K available (EE) SIS(0): END OF MESSAGE (EE) SIS(0): ************************************************** -- XOrg dualhead regression https://launchpad.net/bugs/36461 From nascregv at aol.com Mon Jul 24 14:47:35 2006 From: nascregv at aol.com (Josh Wilson) Date: Mon, 24 Jul 2006 14:47:35 -0000 Subject: [Bug 43961] Re: Power down after shutdown does not work... References: <20060510072310.21520.62027.malonedeb@gandwana.ubuntu.com> Message-ID: <20060724144735.2505.76567.malone@gangotri.ubuntu.com> uname -rnsm Linux wilpad 2.6.15-26-386 i686 ThinkPad A22p, Pentium 3 After doing Power Off 1. ubuntu splash screen--everything turns off 'ok' 2. goes to black screen w/: "Ubuntu 6.06 LTS" "wilpad login:" 3. back to ubuntu splash screen--everything turns off 'ok' stops at: Will now halt 4. goes to black screen w/: "Ubuntu 6.06 LTS" "wilpad login:" hangs -- Power down after shutdown does not work... https://launchpad.net/bugs/43961 From dennis at kaarsemaker.net Mon Jul 24 14:52:29 2006 From: dennis at kaarsemaker.net (Dennis Kaarsemaker) Date: Mon, 24 Jul 2006 14:52:29 -0000 Subject: [Bug 53533] Re: [Bug 53533] Re: [Bug 53533] Re: Compile error with ACPI off References: <20060720151810.11169.18487.malonedeb@gandwana.ubuntu.com> <20060720151946.11169.38670.malone@gandwana.ubuntu.com> <1153411242.5057.74.camel@grayson> Message-ID: <1153752749.5341.58.camel@mirage> Ben: lp suddenly no longer displays attachments in emails. The patch was added to the bug though. -- Compile error with ACPI off https://launchpad.net/bugs/53533 From poget at medusa.bioc.aecom.yu.edu Mon Jul 24 16:00:29 2006 From: poget at medusa.bioc.aecom.yu.edu (pogets) Date: Mon, 24 Jul 2006 16:00:29 -0000 Subject: [Bug 38865] Re: sky2 driver freezing system after ifdown and ifup References: <20060409125752.32313.97119.malonedeb@gandwana.ubuntu.com> Message-ID: <20060724160029.2461.96510.malone@gangotri.ubuntu.com> To permanently use sk98lin, I have simply moved the sky2.ko file to some other location from the /lib/modules/2.6.15-26-386/kernel/drivers/net directory. That way, only sk98lin gets loaded at boot and works fine - I always bring up the network manually (ifup eth0) with different scripts depending on my location, but I think it should also work automatically if you have set it up that way. -- sky2 driver freezing system after ifdown and ifup https://launchpad.net/bugs/38865 From shapiro at math.umass.edu Mon Jul 24 17:06:00 2006 From: shapiro at math.umass.edu (geos) Date: Mon, 24 Jul 2006 17:06:00 -0000 Subject: [Bug 53898] Re: [Bug 53898] upgrading to 2.6.15-26 in Dapper causes graphics slowdown References: <20060724140315.2083.70946.malonedeb@gandwana.ubuntu.com> Message-ID: *** This bug is a duplicate of bug 51576 *** Also, I briefly used the 2.6.17 kernel from edgy, which also didn't have the problem I've described (although it had other problems...) so it really seems like a bug in 2.6.15-26 -- upgrading to 2.6.15-26 in Dapper causes graphics slowdown https://launchpad.net/bugs/53898 From michael at supermathie.net Mon Jul 24 17:38:25 2006 From: michael at supermathie.net (MikeyB) Date: Mon, 24 Jul 2006 17:38:25 -0000 Subject: [Bug 53927] Please include queuefreeze patch in future kernel builds References: <20060724173826.2505.56053.malonedeb@gangotri.ubuntu.com> Message-ID: <20060724173826.2505.56053.malonedeb@gangotri.ubuntu.com> Public bug reported: Binary package hint: linux-image-2.6.15-26-686 The distro kernels include hdaps support (thank you!) however we cannot freeze hard drives when a shock is detected. Please add the queuefreeze patch to the kernel builds - note that it does not (fingers crossed :) affect people who do not choose to use it. I've worked the patch to apply cleanly against 2.6.15 sources - see: http://www.supermathie.net/~michael/linux-source-2.6.15-mikeyb-queuefreeze.patch ** Affects: linux-source-2.6.15 (Ubuntu) Importance: Untriaged Status: Unconfirmed -- Please include queuefreeze patch in future kernel builds https://launchpad.net/bugs/53927 From michael at supermathie.net Mon Jul 24 17:39:30 2006 From: michael at supermathie.net (MikeyB) Date: Mon, 24 Jul 2006 17:39:30 -0000 Subject: [Bug 53927] Re: Please include queuefreeze patch in future kernel builds References: <20060724173826.2505.56053.malonedeb@gangotri.ubuntu.com> Message-ID: <20060724173930.2461.60204.malone@gangotri.ubuntu.com> -- Please include queuefreeze patch in future kernel builds https://launchpad.net/bugs/53927 From shapiro at math.umass.edu Mon Jul 24 17:36:49 2006 From: shapiro at math.umass.edu (geos) Date: Mon, 24 Jul 2006 17:36:49 -0000 Subject: [Bug 53898] Re: upgrading to 2.6.15-26 in Dapper causes graphics slowdown References: <20060724140315.2083.70946.malonedeb@gandwana.ubuntu.com> Message-ID: <20060724173649.2505.62857.launchpad@gangotri.ubuntu.com> *** This bug is a duplicate of bug 51576 *** ** Changed in: Ubuntu Sourcepackagename: None => linux-686 ** Changed in: linux-686 (Ubuntu) Sourcepackagename: linux-686 => linux-386 -- upgrading to 2.6.15-26 in Dapper causes graphics slowdown https://launchpad.net/bugs/53898 From cedricmalherbe at gmail.com Tue Jul 25 01:29:15 2006 From: cedricmalherbe at gmail.com (Cedric) Date: Tue, 25 Jul 2006 01:29:15 -0000 Subject: [Bug 53972] Via USB and ehci_hcd bug: USB not recognized - IRQ issue References: <20060725012915.2461.95839.malonedeb@gangotri.ubuntu.com> Message-ID: <20060725012915.2461.95839.malonedeb@gangotri.ubuntu.com> Public bug reported: Binary package hint: linux-image-2.6-386 On Ubuntu Dapper Drake, with all updates applied, USB devices are not recognized anymore (they used to when Dapper was freshly released). Problem may come from ehci_hcd, as removing this module (modprobe -r ehci_hcd) fix the issue, but then USB devices are stuck on 1.1 low speed standard. Another solution seem to set acpi=noirq at boot time, but didn't fix the problem for me (it did for some other people however). More googling showed me that this problem is ongoing and has appeared in the past as well. Some kernel issue here. Here is what happens when I plug a USB device in (dmesg output): [17185074.604000] usb 4-1: new high speed USB device using ehci_hcd and address 2 [17185075.604000] ehci_hcd 0000:00:10.3: Unlink after no-IRQ? Controller is probably using the wrong IRQ. [17185086.148000] usb 4-1: device not accepting address 2, error -110 [17185086.260000] usb 4-1: new high speed USB device using ehci_hcd and address 3 "Controller is probably using the wrong IRQ" <- There we go: IRQ problem. Still, set acpi=noirq at boot time doesn't fix anything. Here's my lspci output: ced at chasiewbao:~$ lspci 0000:00:00.0 Host bridge: VIA Technologies, Inc. VT8378 [KM400/A] Chipset Host Bridge 0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI Bridge 0000:00:09.0 Network controller: RaLink Ralink RT2500 802.11 Cardbus Reference Card (rev 01) 0000:00:0a.0 CardBus bridge: O2 Micro, Inc. OZ601/6912/711E0 CardBus/SmartCardBus Controller (rev 20) 0000:00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80) 0000:00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80) 0000:00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80) 0000:00:10.3 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 82) 0000:00:11.0 ISA bridge: VIA Technologies, Inc. VT8235 ISA Bridge 0000:00:11.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06) 0000:00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 50) 0000:00:11.6 Communication controller: VIA Technologies, Inc. AC'97 Modem Controller (rev 80) 0000:00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 74) 0000:01:00.0 VGA compatible controller: VIA Technologies, Inc. VT8378 [S3 UniChrome] Integrated Video (rev 01) More information about this bug can be found on ubuntu forums at http://www.ubuntuforums.org/showthread.php?p=1220750 ** Affects: linux-meta (Ubuntu) Importance: Untriaged Status: Unconfirmed -- Via USB and ehci_hcd bug: USB not recognized - IRQ issue https://launchpad.net/bugs/53972 From rdejean at gmail.com Tue Jul 25 01:33:50 2006 From: rdejean at gmail.com (ray) Date: Tue, 25 Jul 2006 01:33:50 -0000 Subject: [Bug 36461] Re: XOrg dualhead regression References: <20060324174628.6253.87338.malonedeb@gandwana.ubuntu.com> Message-ID: <20060725013350.2127.60504.malone@gandwana.ubuntu.com> This bug is hitting me too. I have i810 integrated and PCI ATI card. Heard great things about Ubuntu so it's a bummer to see this bug... i really need dual head. Once you have it, you can't go back hahaha. Any update on a fix? Gonna have to try Suse for a while until a fix for this hits dapper. Thanks. -- XOrg dualhead regression https://launchpad.net/bugs/36461 From volvoguy at gmail.com Tue Jul 25 07:34:52 2006 From: volvoguy at gmail.com (Aaron Waite) Date: Tue, 25 Jul 2006 07:34:52 -0000 Subject: [Bug 19749] Re: SATA HDD not recognized during Breezy Colony 4 install or Dapper Flight 3 References: <20060113140316.21012.69844.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060725073452.2127.28479.malone@gandwana.ubuntu.com> Just a quick note - you guys might want some log files to confirm.... I just installed Eft Knot 1 with the desktop CD and everything seemed to install fine. There was no unloading/loading/reloading of modules to get the hard disk recognized this time around. If you'd like some logs or prefer to see what the "alternative install" disc does, let me know and I'll report back. Otherwise it seems this bug may be officially squished. Yay! -- SATA HDD not recognized during Breezy Colony 4 install or Dapper Flight 3 https://launchpad.net/bugs/19749 From bjoern at boschman.de Tue Jul 25 08:23:56 2006 From: bjoern at boschman.de (jessy) Date: Tue, 25 Jul 2006 08:23:56 -0000 Subject: [Bug 37452] Re: fusion mpt sas driver does not find a RAID1 disk during installation(Sun Galaxy X4200 and X4100) References: <20060331083135.5415.666.malonedeb@gangotri.ubuntu.com> Message-ID: <20060725082356.2127.62807.malone@gandwana.ubuntu.com> Ben: This should be the neccessary changes: 2006-02-16 Linus Torvalds Merge /linux/kernel/git/jejb/scsi-rc-fixes-2.6 http://www.kernel.org/git/?p=linux/kernel/git/stable/linux-2.6.16.y.git;a=shortlog;h=659eadfc20751c1e0784f4910d194fcd836b86db;pg=8 http://www.kernel.org/git/?p=linux/kernel/git/stable/linux-2.6.16.y.git;a=commitdiff;h=26d451b603e754ded83f0e5becab2a78253ad100 -- fusion mpt sas driver does not find a RAID1 disk during installation(Sun Galaxy X4200 and X4100) https://launchpad.net/bugs/37452 From d.devaal at gmail.com Tue Jul 25 11:07:08 2006 From: d.devaal at gmail.com (Dennis de Vaal) Date: Tue, 25 Jul 2006 11:07:08 -0000 Subject: [Bug 23445] Re: iMac G5 will freeze after booting up References: <20060113142343.21012.90472.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060725110708.22426.39672.malone@gangotri.ubuntu.com> 1. This bug has been around for some months. Has never been fixed. 2. The newest kernel stable kernel as of this writing: 2.6.17.6 has correct thermal support but no working sound. Upon boot dmesg says snd: unknown layout 0x53. I am not running Ubuntu at all but i'm having these issues for months and no fix had ever been applied to my knowledge. On the Ubuntu forums, YellowDog forums, Fedora and Gentoo forums all people have the same problems. I posted in different bugs on launcpad but some of them were deleted? After months it's still not fixed how long will this take? Or will this post sit here for months again with a single fix? -- iMac G5 will freeze after booting up https://launchpad.net/bugs/23445 From apeeters at lashout.net Tue Jul 25 13:14:36 2006 From: apeeters at lashout.net (Adriaan Peeters) Date: Tue, 25 Jul 2006 13:14:36 -0000 Subject: [Bug 50297] Re: usb port dead after hibernate References: <20060619070304.13034.78937.malonedeb@gandwana.ubuntu.com> Message-ID: <20060725131436.26715.14260.malone@gandwana.ubuntu.com> It didn't occur anymore, so I am rejecting this bug. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Needs Info => Rejected -- usb port dead after hibernate https://launchpad.net/bugs/50297 From cruiseoveride at gmail.com Tue Jul 25 13:40:57 2006 From: cruiseoveride at gmail.com (cruiseoveride) Date: Tue, 25 Jul 2006 13:40:57 -0000 Subject: [Bug 23445] Re: iMac G5 will freeze after booting up References: <20060113142343.21012.90472.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060725134057.26788.82835.malone@gandwana.ubuntu.com> Everything but sound works on Fedora Core -- iMac G5 will freeze after booting up https://launchpad.net/bugs/23445 From alan at popey.com Tue Jul 25 15:06:25 2006 From: alan at popey.com (AlanPope) Date: Tue, 25 Jul 2006 15:06:25 -0000 Subject: [Bug 48209] Dell XPS Gen2 fails to Resume from Suspend References: <20060603131710.4978.43546.malonedeb@gandwana.ubuntu.com> Message-ID: <20060725150625.26715.81645.launchpad@canonical@gandwana.ubuntu.com> Public bug reported: Currently the Dell XPS 2 is whitelisted as having suspend. A03 Dell Inc. Inspiron XPS Gen2 Not Specified however, it fails with: Jun 3 13:40:14 localhost kernel: [4294807.691000] Uhhuh. NMI received. Dazed and confused, but trying to continue Jun 3 13:40:14 localhost kernel: [4294807.691000] You probably have a hardware problem with your RAM chips amongst other things. ** Affects: linux-source-2.6.15 (Ubuntu) Importance: Medium Status: Unconfirmed -- Dell XPS Gen2 fails to Resume from Suspend https://launchpad.net/bugs/48209 From mjg59 at codon.org.uk Tue Jul 25 15:06:25 2006 From: mjg59 at codon.org.uk (Matthew Garrett) Date: Tue, 25 Jul 2006 15:06:25 -0000 Subject: [Bug 48209] Re: Dell XPS Gen2 fails to Resume from Suspend References: <20060603131710.4978.43546.malonedeb@gandwana.ubuntu.com> Message-ID: <20060725150625.26715.90014.launchpad@gandwana.ubuntu.com> ** Changed in: acpi-support (Ubuntu) Sourcepackagename: acpi-support => linux-source-2.6.15 -- Dell XPS Gen2 fails to Resume from Suspend https://launchpad.net/bugs/48209 From b_i_berg at yahoo.no Tue Jul 25 15:14:53 2006 From: b_i_berg at yahoo.no (=?utf-8?q?Bj=C3=B8rn_Ingmar_Berg?=) Date: Tue, 25 Jul 2006 15:14:53 -0000 Subject: [Bug 53606] Re: IBM Thinkpad R40e special keys does not work with ACPI References: <20060721074626.22384.77155.malonedeb@gangotri.ubuntu.com> Message-ID: <20060725151453.26788.52188.launchpad@gandwana.ubuntu.com> ** Description changed: - Binary package hint: acpi + Binary package hint (2): linux-source-2.6.15 (Ubuntu) + Binary package hint (1): acpi IBM Thinkpad R40e, type 2684-HRG Ubuntu 6.06, kernel version 2.6.15-26-686, all security pathes. ACPI version 0.09-1 When booting normally all power-related functions work. (Detection of main power / battery, battery charge indicator, etc.) Ubuntu is able to shut the computer completely off. With a normal boot no special keys function. When booting with the added parameter ACPI=OFF NO power-related functions work. (Detection of main power / battery, battery charge indicator, etc.) Ubuntu is NOT able to shut the computer completely off. When booting with the added parameter ACPI=OFF special keys function as they should. They keys affected are: "Volume up" "Volume down" "Mute" and all special functions invoked via the key. "Previous page" "Next page" -- IBM Thinkpad R40e special keys does not work with ACPI https://launchpad.net/bugs/53606 From rdejean at gmail.com Tue Jul 25 16:02:15 2006 From: rdejean at gmail.com (ray) Date: Tue, 25 Jul 2006 16:02:15 -0000 Subject: [Bug 36461] Re: XOrg dualhead regression References: <20060324174628.6253.87338.malonedeb@gandwana.ubuntu.com> Message-ID: <20060725160215.26715.48246.malone@gandwana.ubuntu.com> I applied the dpatch by Marcelo and rebuilt the xorg-server package, and what do you know, i got dual-head back. Thanks Marcelo, now i can give kubuntu a whirl. If anyone wants the debs i built, look here. Built on kubuntu dapper. http://www.r-a-y.org/ubuntu/ -- XOrg dualhead regression https://launchpad.net/bugs/36461 From frode at lnix.net Tue Jul 25 19:36:10 2006 From: frode at lnix.net (Frode M. Doeving) Date: Tue, 25 Jul 2006 19:36:10 -0000 Subject: [Bug 52304] Re: annoying CONFIG_BLK_DEV_IDE_PMAC_BLINK default References: <20060708071625.19447.46681.malonedeb@gandwana.ubuntu.com> Message-ID: <20060725193610.22426.9212.malone@gangotri.ubuntu.com> I can confirm this. It is extremely annoying. Please set to N. ** Changed in: linux-meta (Ubuntu) Assignee: (unassigned) => Kernel Bugs Status: Unconfirmed => Confirmed -- annoying CONFIG_BLK_DEV_IDE_PMAC_BLINK default https://launchpad.net/bugs/52304 From me at rnuno.com Tue Jul 25 21:08:22 2006 From: me at rnuno.com (RNuno) Date: Tue, 25 Jul 2006 21:08:22 -0000 Subject: [Bug 53221] Re: rt2570 driver fails to recognise ASUS WL167G References: <20060717091551.1979.63964.malonedeb@gangotri.ubuntu.com> Message-ID: <20060725210822.26788.96628.malone@gandwana.ubuntu.com> I have the same issue. My Atlhon freezes with this ASUS WL167G USB Wireless Stick. When i try to active the device it just hangs, It works fine on Windows. -- rt2570 driver fails to recognise ASUS WL167G https://launchpad.net/bugs/53221 From alan at popey.com Tue Jul 25 21:26:15 2006 From: alan at popey.com (AlanPope) Date: Tue, 25 Jul 2006 21:26:15 -0000 Subject: [Bug 48209] Re: Dell XPS Gen2 fails to Resume from Suspend References: <20060603131710.4978.43546.malonedeb@gandwana.ubuntu.com> Message-ID: <20060725212615.26788.54958.malone@gandwana.ubuntu.com> Upon taking advice from the lovely Matthew Garrett on IRC I did the following prior to suspending the laptop.. $ sudo rmmod sdhci I then suspended the laptop by tapping the power button and choosing "suspend". I waited until the pulsing power light signalled it was suspended, and tapped the power button. It came back perfectly. My SSH sessions continued as did my IRC session. Worth noting this is with the binary nvidia driver in use. /me loves ubuntu (and mjg59) \o/ -- Dell XPS Gen2 fails to Resume from Suspend https://launchpad.net/bugs/48209 From sanjoy at mrao.cam.ac.uk Tue Jul 25 22:55:51 2006 From: sanjoy at mrao.cam.ac.uk (Sanjoy Mahajan) Date: Tue, 25 Jul 2006 22:55:51 -0000 Subject: [Bug 54089] S3 suspend fails once in a while (Thinkpad T60, Ubuntu 6.06) References: <20060725225551.26715.80738.malonedeb@gandwana.ubuntu.com> Message-ID: <20060725225551.26715.80738.malonedeb@gandwana.ubuntu.com> Public bug reported: Binary package hint: linux-image-2.6.15-25-386 Hardware: Thinkpad T60, SATA hard drive, AHCI mode, Intel wireless, Intel graphics (so no binary-only modules). Software: Ubuntu 6.06 Suspend to RAM (S3) fails maybe once every 10 or 20 cycles, with the same failure mode during the suspend: The screen blanks, and it looks like it's asleep with the half-moon LED light on, but the battery LED light doesn't turn off (even with the AC unplugged) and the battery area stays very warm. The only fix is to power down with the power switch and reboot (to keep from losing files, I have the suspend script do a 'sync' before suspending). There's nothing in the logs, sadly, and the machine has no serial port, so I'm not sure what to do next to debug it. ** Affects: linux-source-2.6.15 (Ubuntu) Importance: Untriaged Status: Unconfirmed -- S3 suspend fails once in a while (Thinkpad T60, Ubuntu 6.06) https://launchpad.net/bugs/54089 From ubuntu at paul.sladen.org Tue Jul 25 22:56:54 2006 From: ubuntu at paul.sladen.org (Paul Sladen) Date: Tue, 25 Jul 2006 22:56:54 -0000 Subject: [Bug 48209] Re: sdhci stops Dell XPS Gen2 from Resuming from Suspend References: <20060603131710.4978.43546.malonedeb@gandwana.ubuntu.com> Message-ID: <20060725225654.22488.68248.launchpad@gangotri.ubuntu.com> ** Summary changed: - Dell XPS Gen2 fails to Resume from Suspend + sdhci stops Dell XPS Gen2 from Resuming from Suspend ** Tags added: dell sdhci suspend ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Unconfirmed => Confirmed -- sdhci stops Dell XPS Gen2 from Resuming from Suspend https://launchpad.net/bugs/48209 From duncan at lithgow-schmidt.dk Wed Jul 26 00:56:14 2006 From: duncan at lithgow-schmidt.dk (Duncan Lithgow) Date: Wed, 26 Jul 2006 00:56:14 -0000 Subject: [Bug 54095] monitor dim/brighten reversed (HP Pavilion dv8220ea) References: <20060726004246.22426.39308.malonedeb@gangotri.ubuntu.com> Message-ID: <20060726005614.22488.5726.launchpad@canonical@gangotri.ubuntu.com> Public bug reported: Binary package hint: acpi-support Running Ubuntu 6.06 which has acpi-support 0.85 Whether started with or without the power cable, the screen does the opposite of what's intended. If I put the plug in it dims and if I take it out it brightens. https://wiki.ubuntu.com/LaptopTestingTeam/HP_Pavilion_DV8220EA ** Affects: linux-source-2.6.15 (Ubuntu) Importance: Untriaged Status: Unconfirmed -- monitor dim/brighten reversed (HP Pavilion dv8220ea) https://launchpad.net/bugs/54095 From mjg59 at codon.org.uk Wed Jul 26 00:56:13 2006 From: mjg59 at codon.org.uk (Matthew Garrett) Date: Wed, 26 Jul 2006 00:56:13 -0000 Subject: [Bug 54095] Re: monitor dim/brighten reversed (HP Pavilion dv8220ea) References: <20060726004246.22426.39308.malonedeb@gangotri.ubuntu.com> Message-ID: <20060726005613.22488.16164.malone@gangotri.ubuntu.com> There's no code in Ubuntu which can change the brightness on HP laptops. Are you able to manually change the brightness when it automatically changes? If so, do these changes "stick"? ** Changed in: acpi-support (Ubuntu) Sourcepackagename: acpi-support => linux-source-2.6.15 -- monitor dim/brighten reversed (HP Pavilion dv8220ea) https://launchpad.net/bugs/54095 From dac514 at sympatico.ca Wed Jul 26 02:13:23 2006 From: dac514 at sympatico.ca (conner_bw) Date: Wed, 26 Jul 2006 02:13:23 -0000 Subject: [Bug 34508] Re: 2.6.15 kernel fails to boot on ppc machine References: <20060311210305.30082.75520.malonedeb@gandwana.ubuntu.com> Message-ID: <20060726021323.22426.4654.malone@gangotri.ubuntu.com> I've reported a similar (possibly the same) bug here: https://launchpad.net/distros/ubuntu/+bug/54098 This is happening to me using both Xubuntu and Ubuntu Server versions 6.06. Does anyone know how to fix this without already having Ubuntu installed on the target machine? -- 2.6.15 kernel fails to boot on ppc machine https://launchpad.net/bugs/34508 From evuraan at gmail.com Wed Jul 26 02:37:03 2006 From: evuraan at gmail.com (evuraan) Date: Wed, 26 Jul 2006 02:37:03 -0000 Subject: [Bug 54105] Can't uninstall qpopper (ver: 4.0.5-4sarge1) References: <20060726023703.26715.85873.malonedeb@gandwana.ubuntu.com> Message-ID: <20060726023703.26715.85873.malonedeb@gandwana.ubuntu.com> Public bug reported: Attempts to remove qpopper (ver: 4.0.5-4sarge1) via synaptic says: E: qpopper: subprocess post-removal script returned error exit status 1 Removal through dpkg fails: ~# dpkg --purge --force-remove-reinstreq qpopper (Reading database ... 186827 files and directories currently installed.) Removing qpopper ... dpkg: error processing qpopper (--purge): subprocess post-removal script returned error exit status 1 Errors were encountered while processing: qpopper apt-get remove qpopper fails: ~# dpkg --purge --force-remove-reinstreq qpopper (Reading database ... 186827 files and directories currently installed.) Removing qpopper ... dpkg: error processing qpopper (--purge): subprocess post-removal script returned error exit status 1 Errors were encountered while processing: qpopper This is the package info: $ dpkg -l qpopper Desired=Unknown/Install/Remove/Purge/Hold | Status=Not/Installed/Config-files/Unpacked/Failed-config/Half-installed |/ Err?=(none)/Hold/Reinst-required/X=both-problems (Status,Err: uppercase=bad) ||/ Name Version Description +++-=================================-=================================-================================================================================== pH qpopper 4.0.5-4sarge1 Enhanced Post Office Protocol server (POP3) ** Affects: linux-source-2.6.15 (Ubuntu) Importance: Untriaged Status: Unconfirmed -- Can't uninstall qpopper (ver: 4.0.5-4sarge1) https://launchpad.net/bugs/54105 From ash_hooper at yahoo.com Tue Jul 25 18:56:27 2006 From: ash_hooper at yahoo.com (Ashley) Date: Tue, 25 Jul 2006 18:56:27 -0000 Subject: [Bug 36461] Re: XOrg dualhead regression References: <20060324174628.6253.87338.malonedeb@gandwana.ubuntu.com> Message-ID: <20060725185627.26715.44099.malone@gandwana.ubuntu.com> A recent update of X.org fixed the problem in Edgy Eft (a.k.a Ubuntu 6.10 a.k.a. Ubuntu Unstable a.k.a. the Development release). I'd been using Edgy for a few weeks and only today tried to get it working again and to my surprise it just worked (had to set up Xinerama & whatnot of course). Disclaimer: I am not advocating that you run out and upgrade to Edgy Eft... there are lots and lots of updates (it is synced to Debian Unstable until a 'freeze date' I believe), and so things are liable to break after updates. To the Dapper X.org maintainers, there are 2 ways of fixing this I guess: 2. Patch source of existing xserver-xorg* packages as others have here (or even grab their package, check it's OK and use it!) 1. Push the packages from Edgy into the 6.06 repos (not sure if any dependencies on other, newer packages that are only in Edgy would be a problem though) -- XOrg dualhead regression https://launchpad.net/bugs/36461 From mnoiesen at bigpond.net.au Wed Jul 26 05:26:44 2006 From: mnoiesen at bigpond.net.au (Noiesmo) Date: Wed, 26 Jul 2006 05:26:44 -0000 Subject: [Bug 53602] Re: [Bug 53602] Re: apt-get dist-upgrade References: <20060721062850.11213.71427.malonedeb@gandwana.ubuntu.com> <20060725134854.26715.95917.malone@gandwana.ubuntu.com> Message-ID: <44C6FD14.6080909@bigpond.net.au> Onkar Shinde wrote: > Can you provide more details? What is the last message you see? > > Onkar The last messages on screen are as follows. [ 382.323768] md: Stopping all md devices. [ 383.316517] Shutdown : hda [ 384.783062] Power down. from here I need to push the power button on laptop and prior to dist-upgrade this was not required. Michael -- apt-get dist-upgrade https://launchpad.net/bugs/53602 From mantas at akl.lt Wed Jul 26 08:28:35 2006 From: mantas at akl.lt (=?utf-8?q?Mantas_Kriau=C4=8Di=C5=ABnas?=) Date: Wed, 26 Jul 2006 08:28:35 -0000 Subject: [Bug 38081] Re: ndiswrapper-utils not installed automatically References: <20060404200420.25515.23897.malonedeb@gangotri.ubuntu.com> Message-ID: <20060726082836.22426.57602.launchpad@gangotri.ubuntu.com> ** Also affects: Baltix Importance: Untriaged Status: Unconfirmed -- ndiswrapper-utils not installed automatically https://launchpad.net/bugs/38081 From ash_hooper at yahoo.com Wed Jul 26 09:05:52 2006 From: ash_hooper at yahoo.com (Ashley) Date: Wed, 26 Jul 2006 09:05:52 -0000 Subject: [Bug 36461] Re: XOrg dualhead regression References: <20060324174628.6253.87338.malonedeb@gandwana.ubuntu.com> Message-ID: <20060726090552.22426.89947.malone@gangotri.ubuntu.com> Actually, I spoke to soon about the problem having been fixed in Edgy. It seems I can get my dualhead working, but only by installing Ray's package (from his post directly above my last post) then attempting to restart X (which fails but allows my ATI card to initialise its BIOS), then re-upgrading to the Edgy xserver-xorg-core package. So I guess the folks looking after Debian Unstable haven't fixed this yet either... -- XOrg dualhead regression https://launchpad.net/bugs/36461 From mantas at akl.lt Wed Jul 26 10:36:36 2006 From: mantas at akl.lt (=?utf-8?q?Mantas_Kriau=C4=8Di=C5=ABnas?=) Date: Wed, 26 Jul 2006 10:36:36 -0000 Subject: [Bug 38081] Re: ndiswrapper-utils not installed automatically References: <20060404200420.25515.23897.malonedeb@gangotri.ubuntu.com> Message-ID: <20060726103636.26788.91558.malone@gandwana.ubuntu.com> Ubuntu has big usability problem with lots of network cards, which are not supported by open source drivers, but works fine with ndiswrapper and closed-source Windows drivers from CD, included with network card. In Ubuntu Live and install CD's and in default installation Ubuntu should include not only ndiswrapper-utils package, but also info from http://ndiswrapper.sourceforge.net/mediawiki/index.php/Installation and http://ndiswrapper.sourceforge.net/mediawiki/index.php/List, I think. Without this info users, who have only ndiswrapper supported network cards, can't connect to internet, even advanced linux users can't :( Best decision would be to include some user-friendly wizard to install drivers for network cards, which doesn't have open source drivers in ubuntu, but works through ndiswrapper and closed-source drivers for Windows. ** Changed in: Baltix Importance: Untriaged => Medium Assignee: (unassigned) => Mantas Kriaučiūnas Status: Unconfirmed => Confirmed Target: None => dapper -- ndiswrapper-utils not installed automatically https://launchpad.net/bugs/38081 From mantas at akl.lt Wed Jul 26 10:42:28 2006 From: mantas at akl.lt (=?utf-8?q?Mantas_Kriau=C4=8Di=C5=ABnas?=) Date: Wed, 26 Jul 2006 10:42:28 -0000 Subject: [Bug 39042] Re: new Version available References: <20060410205136.32233.37155.malonedeb@gandwana.ubuntu.com> Message-ID: <20060726104228.22426.23507.launchpad@gangotri.ubuntu.com> ** Also affects: Baltix Importance: Untriaged Status: Unconfirmed -- new Version available https://launchpad.net/bugs/39042 From mikeskla at hotmail.com Wed Jul 26 12:00:57 2006 From: mikeskla at hotmail.com (mikes) Date: Wed, 26 Jul 2006 12:00:57 -0000 Subject: [Bug 52649] Re: After installing the latest Linux kernel with Update Manager, Gnome start not normal. References: <20060711150321.27257.34756.malonedeb@gangotri.ubuntu.com> Message-ID: <20060726120057.22488.16810.malone@gangotri.ubuntu.com> I am having what I think is the same problem with the latest kernel 2.6.15-26-386. Here is more information. It looks like similar hardware: Everything was working well with my Ubuntu 6.06 computer until the upgrade containing the new 2.6.15-26-386 kernel was installed. The boot up starts normally until the login screen comes up. Normally there is a short drum sound when the login screen opens but now the drum sound keeps going and going and going. After that point the computer is unusably slow. If at the grub screen I load the 2.6.15-25-386 kernel everything is fine. Hardware: Motherboard Mach speed V4MDMP KM266 AMD Sempron 2200+ Processor 512 meg memory Spec Description ∗ Micro ATX form factor 4 layers PCB size: 24.4x22.0cm Design ∗ VIA KM400 Memory Graphic Host Chipset (V4MDM/V4MDM) Chipset ∗ VIA KM266Pro Memory Graphic Host Chipset (for V2MDMP) ∗ VIA VT8235 South Bridge ∗ Support 200/266/333MHz (100/133/166MHz) Front Side Bus Clock Generator Clock (CPU Bus clock) ∗ Support DDR200/266/333 system memory clock ∗ Support 33MHz PCI Bus clock ∗ Support AMD Athlon 600MHz∼1.4GHz processor CPU Socket ∗ Support AMD Athlon XP 1500+~3000+ processor ∗ Support AMD Duron 600MHz~1.3GHz processor ∗ Support 200/266/333MHz (100/133/166 MHz) CPU Bus clock ∗ Reserves support for future AMD Athlon/Duron processors ∗ 184-pin DDR DIMM socket x2 support Memory Socket DDR200/DDR266/DDR333 SDRAM ∗ Expandable to 2GB ∗ AGP slot x1 support AGP 3.0 & 8X mode (V4MDMP/V4MDM) Expansion Slot ∗ AGP slot x1 support AGP 2.0 & 4X mode (V2MDMP) ∗ 32-bit PCI slot x3 ∗ UniChrome graphic acceleration Integrate VGA ∗ VGA Memory share 16MB∼64MB from system memory ∗ 24-bit true-color RAMDAC up to 250MHz pixel rate ∗ Resolution up to 1920x1440 ∗ Two PCI IDE controllers support PCI Bus Mastering, ATA Integrate IDE PIO/DMA and the ULTRA DMA 66/100/133 functions that deliver the data transfer rate up to 133 MB/s ∗ VIA VT6103 LAN PHY support 10/100Mbps full duplex, half On board LAN duplex operation (V4MDM not support) ∗ AC’97 Digital Audio controller integrated Audio ∗ AC’97 Audio CODEC on board ∗ Audio driver and utility included ∗ Award 2MB Flash ROM BIOS ∗ PS/2 keyboard and PS/2 mouse connectors Multi I/O ∗ Parallel port x1 ∗ Serial port x2 (connector x1, Header x1) ∗ USB2.0 connector x2, USB2.0 headers x4 (cable option) ∗ Audio connector (Line-in, Line-out, MIC & Game Port) -- After installing the latest Linux kernel with Update Manager, Gnome start not normal. https://launchpad.net/bugs/52649 From mantas at akl.lt Wed Jul 26 12:08:46 2006 From: mantas at akl.lt (=?utf-8?q?Mantas_Kriau=C4=8Di=C5=ABnas?=) Date: Wed, 26 Jul 2006 12:08:46 -0000 Subject: [Bug 19046] Re: ndiswrapper not loaded automatically at boot References: <20060113135931.21012.6629.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060726120846.26715.65621.launchpad@gandwana.ubuntu.com> ** Also affects: Baltix Importance: Untriaged Status: Unconfirmed -- ndiswrapper not loaded automatically at boot https://launchpad.net/bugs/19046 From mantas at akl.lt Wed Jul 26 12:11:11 2006 From: mantas at akl.lt (=?utf-8?q?Mantas_Kriau=C4=8Di=C5=ABnas?=) Date: Wed, 26 Jul 2006 12:11:11 -0000 Subject: [Bug 36322] Re: No firmware for mrv8k References: <20060323231357.18295.12928.malonedeb@gandwana.ubuntu.com> Message-ID: <20060726121111.26788.55824.launchpad@gandwana.ubuntu.com> ** Also affects: Baltix Importance: Untriaged Status: Unconfirmed -- No firmware for mrv8k https://launchpad.net/bugs/36322 From rondom at rondom.de Wed Jul 26 12:11:32 2006 From: rondom at rondom.de (Andreas Gnau) Date: Wed, 26 Jul 2006 12:11:32 -0000 Subject: [Bug 39042] Re: new Version available References: <20060410205136.32233.37155.malonedeb@gandwana.ubuntu.com> Message-ID: <20060726121132.22426.65630.malone@gangotri.ubuntu.com> Although edgy is not that far behind, this is still a problem. Maybe making exceptions for ndiswrapper is an idea. -- new Version available https://launchpad.net/bugs/39042 From mantas at akl.lt Wed Jul 26 12:17:17 2006 From: mantas at akl.lt (=?utf-8?q?Mantas_Kriau=C4=8Di=C5=ABnas?=) Date: Wed, 26 Jul 2006 12:17:17 -0000 Subject: [Bug 49820] ndiswrapper-utils package should be installed by default References: <20060615091109.31271.42369.malonedeb@gandwana.ubuntu.com> Message-ID: <20060726121717.26715.1220.malone@gandwana.ubuntu.com> I think this bug is a duplicate of bug #38081 Btw, In Ubuntu Live and install CD's and in default installation Ubuntu should include not only ndiswrapper-utils package, but also info from http://ndiswrapper.sourceforge.net/mediawiki/index.php/Installation and http://ndiswrapper.sourceforge.net/mediawiki/index.php/List, I think. Without this info users, who have only ndiswrapper supported network cards, can't connect to internet, even advanced linux users can't :( Best decision would be to include some user-friendly wizard to install drivers for network cards, which doesn't have open source drivers in ubuntu, but works through ndiswrapper and closed-source drivers for Windows. There is ndisgtk package in Ubuntu, maybe it should be included as default in Ubuntu main repository and install/Live CD's? -- Package should be installed by default https://launchpad.net/bugs/49820 From rdejean at gmail.com Wed Jul 26 13:40:22 2006 From: rdejean at gmail.com (ray) Date: Wed, 26 Jul 2006 13:40:22 -0000 Subject: [Bug 36461] Re: XOrg dualhead regression References: <20060324174628.6253.87338.malonedeb@gandwana.ubuntu.com> Message-ID: <20060726134022.29717.22699.malone@gandwana.ubuntu.com> Yes i was wondering... cause i upgraded to Edgy first to see if it was fixed there and it wasn't. So i reinstalled Dapper and built the xorg- server package with Marcelo's dpatch. Dual head has been working great for me ever since. An update for xserver-xorg-core in Dapper came out yesterday, but i saw no mention of this bug. Fabio M. Di Nitto is listed as the maintainer... I wonder if he's following this thread haha :) -- XOrg dualhead regression https://launchpad.net/bugs/36461 From jcorbier at ubuntu.com Wed Jul 26 15:16:36 2006 From: jcorbier at ubuntu.com (=?utf-8?b?SsOpcsOpbWllIENvcmJpZXI=?=) Date: Wed, 26 Jul 2006 15:16:36 -0000 Subject: [Bug 54156] Re: IPv6 implementations do not degrace on networks with no IPv6 support References: <20060726145921.29717.16071.malonedeb@gandwana.ubuntu.com> Message-ID: <20060726151636.3952.75180.malone@gangotri.ubuntu.com> *** This bug is a duplicate of bug 24828 *** Thanks for your bug report. This is a know issue. If you have any other comments, please add them to the other bug report. ** This bug has been marked a duplicate of bug 24828 IPv6 should be disabled by default ** Changed in: Ubuntu Importance: Untriaged => Wishlist Assignee: (unassigned) => Jérémie Corbier Status: Unconfirmed => Rejected -- IPv6 implementations do not degrace on networks with no IPv6 support https://launchpad.net/bugs/54156 From jcorbier at ubuntu.com Wed Jul 26 15:15:16 2006 From: jcorbier at ubuntu.com (=?utf-8?b?SsOpcsOpbWllIENvcmJpZXI=?=) Date: Wed, 26 Jul 2006 15:15:16 -0000 Subject: [Bug 24828] Re: IPv6 should be disabled by default References: <20060113143101.21012.62702.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060726151516.3952.9129.launchpad@gangotri.ubuntu.com> ** Bug 54156 has been marked a duplicate of this bug -- IPv6 should be disabled by default https://launchpad.net/bugs/24828 From runar at mopo.no Wed Jul 26 15:50:49 2006 From: runar at mopo.no (Runar Ingebrigtsen) Date: Wed, 26 Jul 2006 15:50:49 -0000 Subject: [Bug 54168] System won't boot without noapic - need to specify boot option at install time References: <20060726155049.29548.21740.malonedeb@gandwana.ubuntu.com> Message-ID: <20060726155049.29548.21740.malonedeb@gandwana.ubuntu.com> Public bug reported: A newbie won't know why his system doesn't boot, since the system just hangs at uncompressing the kernel. A simple "noapic" in the grub config fixes the problem. This option should be added to the grub config before the installation is completed. ** Affects: linux-source-2.6.15 (Ubuntu) Importance: Untriaged Status: Unconfirmed -- System won't boot without noapic - need to specify boot option at install time https://launchpad.net/bugs/54168 From duncan at lithgow-schmidt.dk Wed Jul 26 15:54:35 2006 From: duncan at lithgow-schmidt.dk (Duncan Lithgow) Date: Wed, 26 Jul 2006 15:54:35 -0000 Subject: [Bug 44173] Re: Dapper Flight 7 didn't find any if my PCI cards References: <20060511085135.21520.51591.malonedeb@gandwana.ubuntu.com> Message-ID: <20060726155435.3814.3298.malone@gangotri.ubuntu.com> 1. This bug can be closed 2. How do I get an account so I can help keep launchpad tidy -- Dapper Flight 7 didn't find any if my PCI cards https://launchpad.net/bugs/44173 From me at jansteffan.de Wed Jul 26 17:58:12 2006 From: me at jansteffan.de (wna) Date: Wed, 26 Jul 2006 17:58:12 -0000 Subject: [Bug 54181] resume fails after upgrade linux-image-2.6.15-26.44-i686 to .45 References: <20060726175812.3952.55083.malonedeb@gangotri.ubuntu.com> Message-ID: <20060726175812.3952.55083.malonedeb@gangotri.ubuntu.com> Public bug reported: Hardware: Dell Latitude D610, ATI graphics Symptoms: Resume works perfectly after suspend and hibernate when I boot kernel linux-image-2.6.15-26.44-i686 It fails when with linux-image-2.6.15-26.45-i686 (blank screen, error message once that HAL failed). I didn't have time to track down the problem, but you can contact me if I can be of further help. ** Affects: linux-source-2.6.15 (Ubuntu) Importance: Untriaged Status: Unconfirmed ** Tags added: dell resume suspend -- resume fails after upgrade linux-image-2.6.15-26.44-i686 to .45 https://launchpad.net/bugs/54181 From me at jansteffan.de Wed Jul 26 18:14:36 2006 From: me at jansteffan.de (wna) Date: Wed, 26 Jul 2006 18:14:36 -0000 Subject: [Bug 54181] Re: resume fails after upgrade linux-image-2.6.15-26.44-i686 to .45 References: <20060726175812.3952.55083.malonedeb@gangotri.ubuntu.com> Message-ID: <20060726181436.29717.96454.launchpad@gandwana.ubuntu.com> ** Description changed: - Hardware: Dell Latitude D610, ATI graphics + Hardware: Dell Latitude D610, ATI graphics, fglrx driver Symptoms: Resume works perfectly after suspend and hibernate when I boot kernel linux-image-2.6.15-26.44-i686 - It fails when with linux-image-2.6.15-26.45-i686 + It fails with linux-image-2.6.15-26.45-i686 (blank screen, error message once that HAL failed). I didn't have time to track down the problem, but you can contact me if I can be of further help. -- resume fails after upgrade linux-image-2.6.15-26.44-i686 to .45 https://launchpad.net/bugs/54181 From ubuntu at gallohouse.com Wed Jul 26 18:27:48 2006 From: ubuntu at gallohouse.com (Ken Gallo) Date: Wed, 26 Jul 2006 18:27:48 -0000 Subject: [Bug 36014] Re: kernel can't scale cpu frequency References: <20060322140248.30471.37870.malonedeb@gangotri.ubuntu.com> Message-ID: <20060726182748.29548.57826.malone@gandwana.ubuntu.com> I have a possible workaround for this problem. I still experienced the problem with the latest Ubuntu kernel (as of 20060724). In looking around I found this solution: http://www.vmware.com/community/thread.jspa?messageID=321981񎦽 Basically, the performance problems stem from ACPI bugs that set the kernel into the wrong "cstate". So, I did this: echo 1 > /sys/module/processor/parameters/max_cstate My performance problems were then solved (at least until a reboot). Hope this helps until a official fix comes out. -- kernel can't scale cpu frequency https://launchpad.net/bugs/36014 From duncan at lithgow-schmidt.dk Wed Jul 26 19:05:35 2006 From: duncan at lithgow-schmidt.dk (Duncan Lithgow) Date: Wed, 26 Jul 2006 19:05:35 -0000 Subject: [Bug 54190] Bluetooth doesn't work (HP Pavilion dv8220ea) References: <20060726190535.3952.418.malonedeb@gangotri.ubuntu.com> Message-ID: <20060726190535.3952.418.malonedeb@gangotri.ubuntu.com> Public bug reported: Can't get any life from bluetooth with a friends telephone... here goes: duncan at duncan-laptop:~$ uname -a Linux duncan-laptop 2.6.15-26-686 #1 SMP PREEMPT Mon Jul 17 20:14:14 UTC 2006 i686 GNU/Linux root at duncan-laptop:~# dmseg ... [17179626.248000] Bluetooth: Core ver 2.8 [17179626.248000] NET: Registered protocol family 31 [17179626.248000] Bluetooth: HCI device and connection manager initialized [17179626.248000] Bluetooth: HCI socket layer initialized [17179626.292000] Bluetooth: L2CAP ver 2.8 [17179626.292000] Bluetooth: L2CAP socket layer initialized [17179626.308000] Bluetooth: RFCOMM socket layer initialized [17179626.308000] Bluetooth: RFCOMM TTY layer initialized [17179626.308000] Bluetooth: RFCOMM ver 1.7 [17186115.228000] Assertion failed! qc->n_elem > 0,drivers/scsi/libata-core.c,at a_fill_sg,line=2531 [17186115.300000] Assertion failed! qc->n_elem > 0,drivers/scsi/libata-core.c,at a_fill_sg,line=2531 [17186292.060000] Assertion failed! qc->n_elem > 0,drivers/scsi/libata-core.c,at a_fill_sg,line=2531 [17186292.076000] Assertion failed! qc->n_elem > 0,drivers/scsi/libata-core.c,at a_fill_sg,line=2531 [17186701.164000] e100: eth0: e100_watchdog: link down [17186881.392000] e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex [17187385.444000] e100: eth0: e100_watchdog: link down [17187471.444000] e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex [17193799.128000] ipw3945: Detected geography ABG (13 802.11bg channels, 23 802. 11a channels) [17193827.708000] ADDRCONF(NETDEV_UP): eth1: link is not ready [17195466.676000] e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex [17198619.112000] ata2: command 0xa0 timeout, stat 0x0 host_stat 0x21 [17198619.112000] sr0: Hmm, seems the drive doesn't support multisession CD's [17204645.688000] e100: eth0: e100_watchdog: link down [17204670.912000] ADDRCONF(NETDEV_UP): eth1: link is not ready [17204674.144000] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [17204808.208000] device eth1 entered promiscuous mode [17205038.684000] device eth1 left promiscuous mode duncan at duncan-laptop:~$ /etc/init.d/bluez-utils start * Starting Bluetooth services... hcid sdpd [ ok ] Still can't find bluetooth duncan at duncan-laptop:~$ hid2hci No devices in HCI mode found ... didn't help. You'd do me a great favour if you helped me work on the debugging guide at https://wiki.ubuntu.com/LaptopTestingTeam/FAQ#head- 96c4f8b4759253c5352d4d5cb5eecb594a54235b That way the next person will give better bug reports Duncan ** Affects: linux-source-2.6.15 (Ubuntu) Importance: Untriaged Status: Unconfirmed -- Bluetooth doesn't work (HP Pavilion dv8220ea) https://launchpad.net/bugs/54190 From john.p.diaz at gmail.com Wed Jul 26 19:43:29 2006 From: john.p.diaz at gmail.com (John D) Date: Wed, 26 Jul 2006 19:43:29 -0000 Subject: [Bug 36461] Re: XOrg dualhead regression References: <20060324174628.6253.87338.malonedeb@gandwana.ubuntu.com> Message-ID: <20060726194330.3814.79531.malone@gangotri.ubuntu.com> I too have been having this problem with my dual head setup here at work. I just installed Ray's binaries, and I can confirm that they work great. Great job Ray. Thanks for building those binaries for us. Now all we need is to get the patch you used into an official update. -- XOrg dualhead regression https://launchpad.net/bugs/36461 From dennis at kaarsemaker.net Wed Jul 26 22:18:50 2006 From: dennis at kaarsemaker.net (Dennis Kaarsemaker) Date: Wed, 26 Jul 2006 22:18:50 -0000 Subject: [Bug 44173] Re: [Bug 44173] Re: Dapper Flight 7 didn't find any if my PCI cards References: <20060511085135.21520.51591.malonedeb@gandwana.ubuntu.com> <20060726155435.3814.3298.malone@gangotri.ubuntu.com> Message-ID: <1153952330.5709.11.camel@mirage> Why do you think this bug can be closed? -- Dapper Flight 7 didn't find any if my PCI cards https://launchpad.net/bugs/44173 From duncan at lithgow-schmidt.dk Wed Jul 26 22:48:39 2006 From: duncan at lithgow-schmidt.dk (Duncan Lithgow) Date: Wed, 26 Jul 2006 22:48:39 -0000 Subject: [Bug 44173] Re: Dapper Flight 7 didn't find any if my PCI cards References: <20060511085135.21520.51591.malonedeb@gandwana.ubuntu.com> Message-ID: <20060726224839.29717.22227.malone@gandwana.ubuntu.com> Because elhigu has said he can't currently reproduce the bug because he's living away. If the problem persists when he's back he can reopen it, as can anyone else with the same problem. But that's just me. Duncan -- Dapper Flight 7 didn't find any if my PCI cards https://launchpad.net/bugs/44173 From john at johnleach.co.uk Wed Jul 26 22:59:29 2006 From: john at johnleach.co.uk (John Leach) Date: Wed, 26 Jul 2006 22:59:29 -0000 Subject: [Bug 44412] Volume broken on hda intel on Sony Vaio laptop References: <20060512180042.15819.59559.malonedeb@gangotri.ubuntu.com> Message-ID: <20060726225929.29717.23916.launchpad@canonical@gandwana.ubuntu.com> Public bug reported: This is on a i386 Dapper system updated from repositories each day. A few weeks ago my sound stopped working on my Sony Vaio VGN-A397XP. Programs (such as totem, mpg123, beep-media-player) would happily sit there playing the audio, but no sound would make it out of the built-in speakers (or from headphones). I tried *every* volume control (and mute switch) in gnome-volume- control, gnome-alsa-mixer, alsamixergui and alsamixer console but with no luck. Then, a few days later a noticed a "speaker" volume control (in all the aforementioned volume tools iirc), which, when turned up, fixed my audio problems. I was pretty sure this particular control had not been there before. Now, a few more days later it has disappeared again and my audio is broken in the same way. This is rather puzzling, but due to it's dis/appearance in all alsa apps I'm assuming it's an alsa issue. Note: the original reporter indicated the bug was in package 'alsa'; however, that package was not published in Ubuntu. ** Affects: linux-source-2.6.15 (Ubuntu) Importance: High Status: Fix Released -- Volume broken on hda intel on Sony Vaio laptop https://launchpad.net/bugs/44412 From john at johnleach.co.uk Wed Jul 26 22:59:29 2006 From: john at johnleach.co.uk (John Leach) Date: Wed, 26 Jul 2006 22:59:29 -0000 Subject: [Bug 44412] Re: Volume broken on hda intel on Sony Vaio laptop References: <20060512180042.15819.59559.malonedeb@gangotri.ubuntu.com> Message-ID: <20060726225929.29717.59990.malone@gandwana.ubuntu.com> This bug report was attached to linux-image-2.6.15-23-686 (Ubuntu), whereas (most) other kernel reports seem to be attached to linux- source-2.6.15. kiko and Keybuk on #launchpad tell me that being able to report on the binary package is a bug and should be fixed. ** Changed in: linux-image-2.6.15-23-686 (Ubuntu) Sourcepackagename: linux-image-2.6.15-23-686 => linux-source-2.6.15 Status: Confirmed => Fix Released -- Volume broken on hda intel on Sony Vaio laptop https://launchpad.net/bugs/44412 From be.geek at gmail.com Wed Jul 26 23:58:51 2006 From: be.geek at gmail.com (begeek) Date: Wed, 26 Jul 2006 23:58:51 -0000 Subject: [Bug 33314] Dapper - kernel config breaks crossover wine References: <20060301194543.17525.63203.malonedeb@gangotri.ubuntu.com> Message-ID: <20060726235851.29548.53203.launchpad@canonical@gandwana.ubuntu.com> Public bug reported: Crossover Office worked in earlier versions of Ubuntu 5.10 and earlier but is broken in Dapper. The error message is "There is not enough memory or hard disk space". The culprit seems to be the kernel config file. In earlier versions has CONFIG_4G set while the dapper release have CONFIG-2G set. Any pressing reason for this change in the memory model? Note: the original reporter indicated the bug was in package 'linux- image-2.6.15-16-686'; however, that package was not published in Baltix. ** Affects: linux-source-2.6.15 (Ubuntu) Importance: High Status: Unconfirmed ** Affects: Baltix Importance: Medium Status: Rejected -- Dapper - kernel config breaks crossover wine https://launchpad.net/bugs/33314 From kiko at async.com.br Wed Jul 26 23:58:51 2006 From: kiko at async.com.br (Christian Reis) Date: Wed, 26 Jul 2006 23:58:51 -0000 Subject: [Bug 33314] Re: Dapper - kernel config breaks crossover wine References: <20060301194543.17525.63203.malonedeb@gangotri.ubuntu.com> Message-ID: <20060726235851.29548.59677.launchpad@gandwana.ubuntu.com> ** Changed in: linux-image-2.6.15-15-686 (Ubuntu) Sourcepackagename: linux-image-2.6.15-15-686 => linux-source-2.6.15 -- Dapper - kernel config breaks crossover wine https://launchpad.net/bugs/33314 From lip at lip.kiev.ua Thu Jul 27 00:19:41 2006 From: lip at lip.kiev.ua (Sidoruk Yaroslav) Date: Thu, 27 Jul 2006 00:19:41 -0000 Subject: [Bug 54209] Error: MP-BIOS 8254 timer can't connect to IO-APIC References: <20060727000941.3814.63134.malonedeb@gangotri.ubuntu.com> Message-ID: <20060727001941.3952.29091.launchpad@canonical@gangotri.ubuntu.com> Public bug reported: Binary package hint: kernel-image-2.6-386 Ubuntu 6.06 Kernel 2.6.15-26-386 This error start because APIC Function is enable in BIOS. If I disable APIC in BIOS system started but some times usb mouse and usb keyboard not working, because kernel modules has crash. If I reconnect usb device it's alredy working. P.S. If I load old kernel 2.6.12-10-386 and APIC Function is enable in my BIOS all working fine. ** Affects: linux-source-2.6.15 (Ubuntu) Importance: Untriaged Status: Unconfirmed -- Error: MP-BIOS 8254 timer can't connect to IO-APIC https://launchpad.net/bugs/54209 From kiko at async.com.br Thu Jul 27 00:10:54 2006 From: kiko at async.com.br (Christian Reis) Date: Thu, 27 Jul 2006 00:10:54 -0000 Subject: [Bug 38388] Re: Crashes on mount References: <20060406102314.32233.71871.malonedeb@gandwana.ubuntu.com> Message-ID: <20060727001054.29717.7863.launchpad@gandwana.ubuntu.com> ** Changed in: xfs-modules-2.6.15-20-386-di (Ubuntu) Sourcepackagename: xfs-modules-2.6.15-20-386-di => debian-installer -- Crashes on mount https://launchpad.net/bugs/38388 From crimsun at fungus.sh.nu Thu Jul 27 00:19:41 2006 From: crimsun at fungus.sh.nu (Daniel T Chen) Date: Thu, 27 Jul 2006 00:19:41 -0000 Subject: [Bug 54209] Re: Error: MP-BIOS 8254 timer can't connect to IO-APIC References: <20060727000941.3814.63134.malonedeb@gangotri.ubuntu.com> Message-ID: <20060727001941.3952.89628.launchpad@gangotri.ubuntu.com> ** Changed in: kernel-image-2.6.7-i386 (Ubuntu) Sourcepackagename: kernel-image-2.6.7-i386 => linux-source-2.6.15 -- Error: MP-BIOS 8254 timer can't connect to IO-APIC https://launchpad.net/bugs/54209 From cepe at gmbm.net Thu Jul 27 01:03:41 2006 From: cepe at gmbm.net (=?utf-8?q?Jos=C3=A9_M=2E_L=C3=B3pez-Cepero?=) Date: Thu, 27 Jul 2006 01:03:41 -0000 Subject: [Bug 53754] Re: ata_piix problem with Intel ICH7 chipset References: <20060722182526.11213.79901.malonedeb@gandwana.ubuntu.com> Message-ID: <20060727010341.29548.15264.malone@gandwana.ubuntu.com> Changing to Confirmed, since it has happened to me in two different laptops (thus nearly excluding hardware problems) and on a stock Ubuntu 6.06 installation. ** Changed in: linux-meta (Ubuntu) Status: Unconfirmed => Confirmed -- ata_piix problem with Intel ICH7 chipset https://launchpad.net/bugs/53754 From gad.kadosh at gmail.com Thu Jul 27 03:44:40 2006 From: gad.kadosh at gmail.com (fuoco) Date: Thu, 27 Jul 2006 03:44:40 -0000 Subject: [Bug 46578] Re: [regression] 2.6.15-22-powerpc -> 2.6.15-23-powerpc: direct rendering gone missing with References: <20060525134051.13817.99534.malonedeb@gandwana.ubuntu.com> Message-ID: <20060727034440.29548.68948.malone@gandwana.ubuntu.com> I have the same problem on my iBook, radeon 9550. My kernel is 2.6.15-26-powerpc - I'm new to ubuntu and haven't tried other kernels before so I don't know if it was supposed to work, but in other distro (gentoo) it worked perfectly with just vanilla kernel and xorg... my dmesg: [ 85.949668] [drm] Initialized drm 1.0.1 20051102 [ 85.995517] [drm] Initialized radeon 1.24.0 20060225 on minor 0 [ 87.118258] agpgart: Putting AGP V2 device at 0000:00:0b.0 into 4x mode [ 87.118272] agpgart: Putting AGP V2 device at 0000:00:10.0 into 4x mode [ 87.198209] [drm:radeon_do_init_cp] *ERROR* Cannot initialise DRM on this card [ 87.198218] This card requires a new X.org DDX -- [regression] 2.6.15-22-powerpc -> 2.6.15-23-powerpc: direct rendering gone missing with https://launchpad.net/bugs/46578 From thisdyingdream at gmail.com Thu Jul 27 06:30:58 2006 From: thisdyingdream at gmail.com (Steven Harms) Date: Thu, 27 Jul 2006 06:30:58 -0000 Subject: [Bug 53606] Re: IBM Thinkpad R40e special keys does not work with ACPI References: <20060721074626.22384.77155.malonedeb@gangotri.ubuntu.com> Message-ID: <20060727063058.29717.53447.malone@gandwana.ubuntu.com> Verified that APIC makes no difference in this bug. -- IBM Thinkpad R40e special keys does not work with ACPI https://launchpad.net/bugs/53606 From parrif_ibb at yahoo.com Thu Jul 27 07:26:20 2006 From: parrif_ibb at yahoo.com (Fabio Parri) Date: Thu, 27 Jul 2006 07:26:20 -0000 Subject: [Bug 41959] Re: Card reader on Acer TM 3010 doesn't work References: <20060428194538.28955.78281.malonedeb@gandwana.ubuntu.com> Message-ID: <20060727072620.3814.32419.malone@gangotri.ubuntu.com> Partial support for it has been included in kernel 2.6.17: -- Card reader on Acer TM 3010 doesn't work https://launchpad.net/bugs/41959 From cjwatson at canonical.com Thu Jul 27 07:43:22 2006 From: cjwatson at canonical.com (Colin Watson) Date: Thu, 27 Jul 2006 07:43:22 -0000 Subject: [Bug 38388] Re: Crashes on mount References: <20060406102314.32233.71871.malonedeb@gandwana.ubuntu.com> Message-ID: <20060727074322.3814.8843.launchpad@gangotri.ubuntu.com> ** Changed in: debian-installer (Ubuntu) Sourcepackagename: debian-installer => linux-source-2.6.15 -- Crashes on mount https://launchpad.net/bugs/38388 From cooperstephenjames at gmail.com Wed Jul 26 20:22:41 2006 From: cooperstephenjames at gmail.com (thetravellor) Date: Wed, 26 Jul 2006 20:22:41 -0000 Subject: [Bug 53221] Re: [Bug 53221] Re: rt2570 driver fails to recognise ASUS WL167G References: <20060717091551.1979.63964.malonedeb@gangotri.ubuntu.com> <20060725210822.26788.96628.malone@gandwana.ubuntu.com> Message-ID: <22D4AFDB-B351-467B-9163-B8A9BE714B67@gmail.com> You are running under "Intel" version of Ubuntu Linux and mine is on the PowerPC version. With the default ubuntu kernel the kernel fails to recognise the vendor ID. In your case, you could probably try the latest drivers from Serialmonkey or even Ralink. There is even a Ural driver. I have tried all and none of them either compile correctly or work on PowerPC Stephen Cooper Email: cooperstephenjames at gmail.com Skype: cooperstephenjames eFax: +61 8 8125 6630 (Australia) On Jul 25, 2006, at 11:08 PM, RNuno wrote: > I have the same issue. > > My Atlhon freezes with this ASUS WL167G USB Wireless Stick. > When i try to active the device it just hangs, It works fine on > Windows. > > -- > rt2570 driver fails to recognise ASUS WL167G > https://launchpad.net/bugs/53221 -- rt2570 driver fails to recognise ASUS WL167G https://launchpad.net/bugs/53221 From shapiro at math.umass.edu Thu Jul 27 14:52:15 2006 From: shapiro at math.umass.edu (geos) Date: Thu, 27 Jul 2006 14:52:15 -0000 Subject: [Bug 52855] Re: [Bug 52855] Re: ThinkPad x60s hangs temporarily at Mounting Root Filesystem References: <20060713100553.12867.62199.malonedeb@gandwana.ubuntu.com> <20060713163012.13020.12788.malone@gandwana.ubuntu.com> Message-ID: this doesn't fix the problem... On Thu, 13 Jul 2006, Ben Collins wrote: > Update to latest dapper-security kernel to obtain fixes in regard to > this bug. > > ** Changed in: linux-source-2.6.15 (Ubuntu) > Status: Unconfirmed => Fix Released > > -- > ThinkPad x60s hangs temporarily at Mounting Root Filesystem > https://launchpad.net/bugs/52855 > -- ThinkPad x60s hangs temporarily at Mounting Root Filesystem https://launchpad.net/bugs/52855 From ubuntu-bugs at nullinfinity.org Thu Jul 27 16:32:57 2006 From: ubuntu-bugs at nullinfinity.org (Johan Brannlund) Date: Thu, 27 Jul 2006 16:32:57 -0000 Subject: [Bug 41959] Re: Card reader on Acer TM 3010 doesn't work References: <20060428194538.28955.78281.malonedeb@gandwana.ubuntu.com> Message-ID: <20060727163257.29548.85689.malone@gandwana.ubuntu.com> The SDHCI driver has been included in the Ubuntu kernels for quite a while now. Trying the 2.6.17 kernel probably won't help you. -- Card reader on Acer TM 3010 doesn't work https://launchpad.net/bugs/41959 From luke.hoersten at gmail.com Thu Jul 27 17:53:59 2006 From: luke.hoersten at gmail.com (Luke Hoersten) Date: Thu, 27 Jul 2006 17:53:59 -0000 Subject: [Bug 54273] USB device not accepting address: error -110 References: <20060727175359.29548.78878.malonedeb@gandwana.ubuntu.com> Message-ID: <20060727175359.29548.78878.malonedeb@gandwana.ubuntu.com> Public bug reported: Binary package hint: linux-image-2.6.15-26-k7 I have a USB devices: mouse, camera, ipod and printer plugged in. The only device that works is the printer. Everything used to work in 2.6.15-25-k7. Mouse works with PS2 converter but not straight into USB. **lsusb output: Bus 004 Device 001: ID 0000:0000 Bus 001 Device 003: ID 03f0:7204 Hewlett-Packard DeskJet 36xx Bus 001 Device 001: ID 0000:0000 Bus 003 Device 001: ID 0000:0000 Bus 002 Device 001: ID 0000:0000 **dmesg output: [17355309.768000] usb 4-2: device not accepting address 78, error -110 [17355309.880000] usb 4-2: new high speed USB device using ehci_hcd and address 79 [17355320.304000] usb 4-2: device not accepting address 79, error -110 [17355320.552000] usb 4-5: new high speed USB device using ehci_hcd and address 80 [17355332.116000] usb 4-5: device not accepting address 80, error -110 [17355332.228000] usb 4-5: new high speed USB device using ehci_hcd and address 81 [17355343.792000] usb 4-5: device not accepting address 81, error -110 [17355343.908000] usb 4-5: new high speed USB device using ehci_hcd and address 82 [17355354.340000] usb 4-5: device not accepting address 82, error -110 [17355354.456000] usb 4-5: new high speed USB device using ehci_hcd and address 83 [17355364.892000] usb 4-5: device not accepting address 83, error -110 [17355365.140000] usb 4-2: new high speed USB device using ehci_hcd and address 84 ** Affects: linux-source-2.6.15 (Ubuntu) Importance: Untriaged Status: Unconfirmed ** Description changed: Binary package hint: linux-image-2.6.15-26-k7 I have a USB devices: mouse, camera, ipod and printer plugged in. The only device that works is the printer. Everything used to work in - 2.6.15-25-k7. + 2.6.15-25-k7. Mouse works with PS2 converter but not straight into USB. **lsusb output: Bus 004 Device 001: ID 0000:0000 Bus 001 Device 003: ID 03f0:7204 Hewlett-Packard DeskJet 36xx Bus 001 Device 001: ID 0000:0000 Bus 003 Device 001: ID 0000:0000 Bus 002 Device 001: ID 0000:0000 **dmesg output: [17355309.768000] usb 4-2: device not accepting address 78, error -110 [17355309.880000] usb 4-2: new high speed USB device using ehci_hcd and address 79 [17355320.304000] usb 4-2: device not accepting address 79, error -110 [17355320.552000] usb 4-5: new high speed USB device using ehci_hcd and address 80 [17355332.116000] usb 4-5: device not accepting address 80, error -110 [17355332.228000] usb 4-5: new high speed USB device using ehci_hcd and address 81 [17355343.792000] usb 4-5: device not accepting address 81, error -110 [17355343.908000] usb 4-5: new high speed USB device using ehci_hcd and address 82 [17355354.340000] usb 4-5: device not accepting address 82, error -110 [17355354.456000] usb 4-5: new high speed USB device using ehci_hcd and address 83 [17355364.892000] usb 4-5: device not accepting address 83, error -110 [17355365.140000] usb 4-2: new high speed USB device using ehci_hcd and address 84 ** Tags added: usb -- USB device not accepting address: error -110 https://launchpad.net/bugs/54273 From david.s.morgan at gmail.com Thu Jul 27 18:54:34 2006 From: david.s.morgan at gmail.com (DaMoGan) Date: Thu, 27 Jul 2006 18:54:34 -0000 Subject: [Bug 54279] iPod 4G (Video) missing from drivers/usb/storage/unusual_devs.h References: <20060727185434.29717.67077.malonedeb@gandwana.ubuntu.com> Message-ID: <20060727185434.29717.67077.malonedeb@gandwana.ubuntu.com> Public bug reported: Binary package hint: linux-image-2.6.15-26-386 I noticed that my iPod (60Gb video) is missing from drivers/usb/storage/unusual_devs.h: from output of 'hal-device' usb.product_id = 4617 (0x1209) (int) usb.vendor = 'Apple Computer, Inc.' (string) 0x1209 is nowhere to be found. I think the following should be added to unusual_devs.h: UNUSUAL_DEV( 0x05ac, 0x1209, 0x0000, 0x9999, "Apple", "iPod", US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_FIX_CAPACITY ), ** Affects: linux-source-2.6.15 (Ubuntu) Importance: Untriaged Status: Unconfirmed -- iPod 4G (Video) missing from drivers/usb/storage/unusual_devs.h https://launchpad.net/bugs/54279 From david.s.morgan at gmail.com Thu Jul 27 19:13:42 2006 From: david.s.morgan at gmail.com (DaMoGan) Date: Thu, 27 Jul 2006 19:13:42 -0000 Subject: [Bug 54279] Re: iPod 4G (Video) missing from drivers/usb/storage/unusual_devs.h References: <20060727185434.29717.67077.malonedeb@gandwana.ubuntu.com> Message-ID: <20060727191342.29548.47147.malone@gandwana.ubuntu.com> Oops, I guess that actually makes it a 5G model. Who can keep track of these things any more, with Apple's constant flood of new iPod models! :-) -- iPod 4G (Video) missing from drivers/usb/storage/unusual_devs.h https://launchpad.net/bugs/54279 From lip at lip.kiev.ua Thu Jul 27 21:21:50 2006 From: lip at lip.kiev.ua (Sidoruk Yaroslav) Date: Thu, 27 Jul 2006 21:21:50 -0000 Subject: [Bug 54209] Re: Error: MP-BIOS 8254 timer can't connect to IO-APIC References: <20060727000941.3814.63134.malonedeb@gangotri.ubuntu.com> Message-ID: <20060727212151.29548.62381.malone@gandwana.ubuntu.com> Fixed!! Just install new kernel like 2.6.17.7 -- Error: MP-BIOS 8254 timer can't connect to IO-APIC https://launchpad.net/bugs/54209 From lathiat at bur.st Fri Jul 28 01:34:53 2006 From: lathiat at bur.st (Trent Lloyd) Date: Fri, 28 Jul 2006 01:34:53 -0000 Subject: [Bug 24828] Re: IPv6 should be disabled by default References: <20060113143101.21012.62702.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060728013453.29717.70438.malone@gandwana.ubuntu.com> Disabling IPv6 increaseing the throughput of your internet connection makes no sense and I think thats just circumstantial, sorry :) The place where it *does* make a difference is the speed of new connections, it seems that in some cases certain dns servers ignore requests for IPv6 records and so everytime you try to resolve an IPv6 address it waits for them to timeout. These broken DNS servers should really be fixed, but the last point could work, not to bother looking up, guess it would fix some of these cases. Could someone who experiences and is willing to let me login to their machine please contact me? I'd love to try this as its never really affected me. -- IPv6 should be disabled by default https://launchpad.net/bugs/24828 From roman at rs-labs.com Fri Jul 28 03:02:10 2006 From: roman at rs-labs.com (RoMaNSoFt) Date: Fri, 28 Jul 2006 03:02:10 -0000 Subject: [Bug 26119] Re: Possible fake host protected area (hpa) detected in ide drive causing SectorIdNotFound References: <20060113144800.21012.37276.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060728030210.3814.56741.malone@gangotri.ubuntu.com> Tested on up-to-date Dapper. Kernel: 2.6.15-26-386. The bug is still there. I observed the very same odd behaviour when I had Fedora so it seems a kernel issue. It's very annoying 'cause DMA is being disabled and performance highly decreases. I have two ST340823A disks and the bug is present in both of them. -Roman -- Possible fake host protected area (hpa) detected in ide drive causing SectorIdNotFound https://launchpad.net/bugs/26119 From martin_hosken at sil.org Fri Jul 28 04:23:11 2006 From: martin_hosken at sil.org (Martin Hosken) Date: Fri, 28 Jul 2006 04:23:11 -0000 Subject: [Bug 24828] Re: [Bug 24828] Re: IPv6 should be disabled by default References: <20060113143101.21012.62702.launchpad@macquarie.warthogs.hbd.com> <20060728013453.29717.70438.malone@gandwana.ubuntu.com> Message-ID: <44C9912F.3000409@sil.org> Dear Trent, > Disabling IPv6 increaseing the throughput of your internet connection > makes no sense and I think thats just circumstantial, sorry :) > > The place where it *does* make a difference is the speed of new > connections, it seems that in some cases certain dns servers ignore > requests for IPv6 records and so everytime you try to resolve an IPv6 > address it waits for them to timeout. > It is worse than that. In the time it takes for the IPv6 DNS request to fail the application times out on making its connection. > These broken DNS servers should really be fixed, but the last point > could work, not to bother looking up, guess it would fix some of these > cases. > It's not a question of the DNS server being dumb it's usually some cheap ADSL router/modem that is sitting between the computer and a good DNS server. Often configuring the router to pass a real DNS server address to the dhcp client is enough to solve the problem. But not all routers allow you to configure the dhcp server in them sufficiently. So perhaps the real fix is to provide a way to turn off IPv6 DNS requests. But I guess that is impossible without turning off IPv6 in general. How much IPv6 takes off depends to a large extent on what MS do with Vista, I would suspect. > Could someone who experiences and is willing to let me login to their > machine please contact me? I'd love to try this as its never really > affected me. > I'll send you directly, offline, a couple of tcpdump traces to compare. One is dns request to the D-Link 504T ADSL modem/router and the other is directly to a DNS server with packets merely routed by the modem. -- IPv6 should be disabled by default https://launchpad.net/bugs/24828 From lathiat at bur.st Fri Jul 28 04:46:29 2006 From: lathiat at bur.st (Trent Lloyd) Date: Fri, 28 Jul 2006 04:46:29 -0000 Subject: [Bug 24828] Re: [Bug 24828] Re: [Bug 24828] Re: IPv6 should be disabled by default References: <20060113143101.21012.62702.launchpad@macquarie.warthogs.hbd.com> <20060728013453.29717.70438.malone@gandwana.ubuntu.com> <44C9912F.3000409@sil.org> Message-ID: <20060728044629.GD15603@bur.st> On Fri, Jul 28, 2006 at 04:23:11AM -0000, Martin Hosken wrote: > Dear Trent, > > Disabling IPv6 increaseing the throughput of your internet connection > > makes no sense and I think thats just circumstantial, sorry :) > > > > The place where it *does* make a difference is the speed of new > > connections, it seems that in some cases certain dns servers ignore > > requests for IPv6 records and so everytime you try to resolve an IPv6 > > address it waits for them to timeout. > > > > It is worse than that. In the time it takes for the IPv6 DNS request to > fail the application times out on making its connection. > > These broken DNS servers should really be fixed, but the last point > > could work, not to bother looking up, guess it would fix some of these > > cases. > > > > It's not a question of the DNS server being dumb it's usually some cheap > ADSL router/modem that is sitting between the computer and a good DNS > server. Often configuring the router to pass a real DNS server address > to the dhcp client is enough to solve the problem. But not all routers > allow you to configure the dhcp server in them sufficiently. > > So perhaps the real fix is to provide a way to turn off IPv6 DNS > requests. But I guess that is impossible without turning off IPv6 in > general. How much IPv6 takes off depends to a large extent on what MS do > with Vista, I would suspect. > > Could someone who experiences and is willing to let me login to their > > machine please contact me? I'd love to try this as its never really > > affected me. > > > I'll send you directly, offline, a couple of tcpdump traces to compare. > One is dns request to the D-Link 504T ADSL modem/router and the other is > directly to a DNS server with packets merely routed by the modem. > > -- > IPv6 should be disabled by default > https://launchpad.net/bugs/24828 -- Trent Lloyd Bur.st Networking Inc. -- IPv6 should be disabled by default https://launchpad.net/bugs/24828 From mnoiesen at bigpond.net.au Fri Jul 28 09:40:53 2006 From: mnoiesen at bigpond.net.au (Noiesmo) Date: Fri, 28 Jul 2006 09:40:53 -0000 Subject: [Bug 53602] Re: [Bug 53602] Re: [Bug 53602] Re: apt-get dist-upgrade References: <20060721062850.11213.71427.malonedeb@gandwana.ubuntu.com> <20060725134854.26715.95917.malone@gandwana.ubuntu.com> <44C6FD14.6080909@bigpond.net.au> Message-ID: <44C9DBA5.5070207@bigpond.net.au> Noiesmo wrote: > Onkar Shinde wrote: > >> Can you provide more details? What is the last message you see? >> >> >> > Onkar > > The last messages on screen are as follows. > > [ 382.323768] md: Stopping all md devices. > [ 383.316517] Shutdown : hda > [ 384.783062] Power down. > > > from here I need to push the power button on laptop and prior to > dist-upgrade this was not required. > > Michael > > Onkar My problem seems to have been corrected. The only thing that I did since the laptop stopped powering down and report the bug, was a some software gnome apps thru apt-get and now everything is working. Michael -- apt-get dist-upgrade https://launchpad.net/bugs/53602 From zulcss at gmail.com Fri Jul 28 12:05:21 2006 From: zulcss at gmail.com (ChuckShort) Date: Fri, 28 Jul 2006 12:05:21 -0000 Subject: [Bug 53602] Re: apt-get dist-upgrade References: <20060721062850.11213.71427.malonedeb@gandwana.ubuntu.com> Message-ID: <20060728120521.3952.5037.malone@gangotri.ubuntu.com> closing ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Unconfirmed => Rejected -- apt-get dist-upgrade https://launchpad.net/bugs/53602 From giuseppe at eppesuigoccas.homedns.org Fri Jul 28 12:15:02 2006 From: giuseppe at eppesuigoccas.homedns.org (Giuseppe Sacco) Date: Fri, 28 Jul 2006 12:15:02 -0000 Subject: [Bug 54351] kernel oops with nbd References: <20060728121502.29717.60565.malonedeb@gandwana.ubuntu.com> Message-ID: <20060728121502.29717.60565.malonedeb@gandwana.ubuntu.com> Public bug reported: Binary package hint: linux-image-2.6.12-10-686-smp We have many daily crashes on a machines that is part of a cluster of two DELL poweredge 1800. The cluster include sharing a disk using nbd. The distribution we used is Breezy 5.10. EIP: 0060:[] not tainted VLI EFFLAGS 00010246 (2.6.12-10-686-smp) EIP is at kunmap_high + 0x55/0x94 eax: 00000150 ebx: 00000000 ecx: 00000000 edx: 00000000 ebp: d891eb80 esp: f7c67eb0 edi: 00000000 esi: 00001000 ds:007b es:007b ss:0068 process kblockd/1 (pid: 96, threadinfo=f7c66000 task=c3211540) stack .... call trace nbd_send_req +0x1f0/0x294 [nbd] do_irq +0x1e/0x24 as_find_arq_rd +0x41/0x4d do_nbd_request +0x142/0x22c [nbd] as_work_handler +0x46/0x5e worker_thread +0x1dd/0x261 as_work_handler +0x0/0x5e default wake function +0x0/0x12 default wake function +0x0/0x12 worker_thread +0x0/0x261 kthread +0xba/0xf0 kthread +0x0/0xf0 kernel thread helper kthread +0x5/0xd c0101401 code 85 c0 48 3d c0 03 ea 01 85 d2 89 14 85 c0 48 3b c0 74 18 83 ea 01 ** Affects: linux-source-2.6.12 (Ubuntu) Importance: Untriaged Status: Unconfirmed -- kernel oops with nbd https://launchpad.net/bugs/54351 From ernstp at gmail.com Fri Jul 28 14:05:00 2006 From: ernstp at gmail.com (Ernst Persson) Date: Fri, 28 Jul 2006 14:05:00 -0000 Subject: [Bug 54366] Hard lock while ripping audio cds References: <20060728140500.29548.76580.malonedeb@gandwana.ubuntu.com> Message-ID: <20060728140500.29548.76580.malonedeb@gandwana.ubuntu.com> Public bug reported: Binary package hint: linux-source-2.6.15 I'm plauged by some kind of kernel panic when ripping audio cds in Dapper. The ripping is done with rhythmbox. The system log reports io timeouts a few times before the hang, however I haven't seen any errormessage from the hang/panic itself. The computer becomes completely unresponsive. The cdrom says this: (hdparm.conf has not been modified) sudo hdparm /dev/hda /dev/hda: IO_support = 1 (32-bit) unmaskirq = 1 (on) using_dma = 1 (on) keepsettings = 0 (off) readonly = 0 (off) readahead = 256 (on) HDIO_GETGEO failed: Invalid argument sudo hdparm -I /dev/hda /dev/hda: ATAPI CD-ROM, with removable media Model Number: _NEC DVD_RW ND-3550A Serial Number: Firmware Revision: 1.04 Standards: Likely used CD-ROM ATAPI-1 Configuration: DRQ response: 3ms. Packet size: 12 bytes Capabilities: LBA, IORDY(cannot be disabled) DMA: mdma0 mdma1 mdma2 udma0 udma1 *udma2 Cycle time: min=120ns recommended=120ns PIO: pio0 pio1 pio2 pio3 pio4 Cycle time: no flow control=120ns IORDY flow control=120ns ** Affects: linux-source-2.6.15 (Ubuntu) Importance: Untriaged Status: Unconfirmed ** Affects: linux-source-2.6.15 (Ubuntu Dapper) Importance: Untriaged Status: Unconfirmed -- Hard lock while ripping audio cds https://launchpad.net/bugs/54366 From ernstp at gmail.com Fri Jul 28 14:08:41 2006 From: ernstp at gmail.com (Ernst Persson) Date: Fri, 28 Jul 2006 14:08:41 -0000 Subject: [Bug 54366] Re: Hard lock while ripping audio cds References: <20060728140500.29548.76580.malonedeb@gandwana.ubuntu.com> Message-ID: <20060728140841.3952.49077.malone@gangotri.ubuntu.com> I'm using the -k7 image -- Hard lock while ripping audio cds https://launchpad.net/bugs/54366 From milo_casagrande at yahoo.it Fri Jul 28 14:19:10 2006 From: milo_casagrande at yahoo.it (MiloCasagrande) Date: Fri, 28 Jul 2006 14:19:10 -0000 Subject: [Bug 24153] Re: ACPI on ASUS L4500R doesn't work, the CPU frequency scaling works, battery and backlight switch don't References: <20060113142735.21012.49495.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060728141910.29548.19243.malone@gandwana.ubuntu.com> I did compile 2.6.18-rc2 and with that version everything is working. Only thing not worikng is suspend. Bye! -- ACPI on ASUS L4500R doesn't work, the CPU frequency scaling works, battery and backlight switch don't https://launchpad.net/bugs/24153 From ernstp at gmail.com Fri Jul 28 16:16:32 2006 From: ernstp at gmail.com (Ernst Persson) Date: Fri, 28 Jul 2006 16:16:32 -0000 Subject: [Bug 54366] Re: Hard lock while ripping audio cds References: <20060728140500.29548.76580.malonedeb@gandwana.ubuntu.com> Message-ID: <20060728161632.3814.75256.malone@gangotri.ubuntu.com> Here's the output from kern.log just before the lockup! Jul 28 10:54:16 localhost kernel: [17194147.076000] hda: DMA timeout retry Jul 28 10:54:16 localhost kernel: [17194147.076000] hda: timeout waiting for DMA Jul 28 10:54:16 localhost kernel: [17194152.080000] hda: status timeout: status=0xd0 { Busy } Jul 28 10:54:16 localhost kernel: [17194152.080000] ide: failed opcode was: unknown Jul 28 10:54:16 localhost kernel: [17194152.080000] hda: drive not ready for command Jul 28 10:54:46 localhost kernel: [17194182.080000] hda: ATAPI reset timed-out, status=0xd0 Jul 28 10:55:21 localhost kernel: [17194212.084000] ide0: reset timed-out, status=0x80 Jul 28 10:55:21 localhost kernel: [17194217.088000] hda: status timeout: status=0x80 { Busy } Jul 28 10:55:21 localhost kernel: [17194217.088000] ide: failed opcode was: unknown Jul 28 10:55:21 localhost kernel: [17194217.088000] hda: drive not ready for command Jul 28 10:55:51 localhost kernel: [17194247.088000] hda: ATAPI reset timed-out, status=0x80 Jul 28 10:56:23 localhost kernel: [17194277.088000] ide0: reset timed-out, status=0x80 Jul 28 10:56:23 localhost kernel: [17194277.152000] cdrom: dropping to single frame dma Jul 28 11:45:34 localhost kernel: [17181360.304000] hda: DMA timeout retry Jul 28 11:45:34 localhost kernel: [17181360.304000] hda: timeout waiting for DMA Jul 28 11:45:34 localhost kernel: [17181365.308000] hda: status timeout: status=0xd0 { Busy } Jul 28 11:45:34 localhost kernel: [17181365.308000] ide: failed opcode was: unknown Jul 28 11:45:34 localhost kernel: [17181365.308000] hda: drive not ready for command Jul 28 11:46:04 localhost kernel: [17181395.308000] hda: ATAPI reset timed-out, status=0xd0 Jul 28 11:46:39 localhost kernel: [17181425.308000] ide0: reset timed-out, status=0x80 Jul 28 11:46:39 localhost kernel: [17181430.312000] hda: status timeout: status=0x80 { Busy } Jul 28 11:46:39 localhost kernel: [17181430.312000] ide: failed opcode was: unknown Jul 28 11:46:39 localhost kernel: [17181430.312000] hda: drive not ready for command Jul 28 11:47:09 localhost kernel: [17181460.312000] hda: ATAPI reset timed-out, status=0x80 Jul 28 11:47:39 localhost kernel: [17181490.312000] ide0: reset timed-out, status=0x80 Jul 28 11:47:39 localhost kernel: [17181490.312000] cdrom: dropping to single frame dma -- Hard lock while ripping audio cds https://launchpad.net/bugs/54366 From welterde at arcor.de Fri Jul 28 17:12:24 2006 From: welterde at arcor.de (welterde) Date: Fri, 28 Jul 2006 17:12:24 -0000 Subject: [Bug 43764] Re: Genius USB-keyboard doesn't work out of the box References: <20060509084834.21547.72386.malonedeb@gandwana.ubuntu.com> Message-ID: <20060728171224.29548.49647.malone@gandwana.ubuntu.com> I am also experiencing this problem. It seems to work after i login to Gnome. -- Genius USB-keyboard doesn't work out of the box https://launchpad.net/bugs/43764 From ilmari.vacklin at helsinki.fi Fri Jul 28 18:35:28 2006 From: ilmari.vacklin at helsinki.fi (Ilmari Vacklin) Date: Fri, 28 Jul 2006 18:35:28 -0000 Subject: [Bug 54382] Thinkpad R51 won't hibernate References: <20060728183528.29717.58342.malonedeb@gandwana.ubuntu.com> Message-ID: <20060728183528.29717.58342.malonedeb@gandwana.ubuntu.com> Public bug reported: Choosing the hibernate action will make the laptop blink the hibernate light for a while, the screen shuts down, and eventually, after some HD activity (about 30 seconds or so), the machine powers down. Starting it up again acts as if no hibernation took place. ** Affects: linux-source-2.6.15 (Ubuntu) Importance: Untriaged Status: Unconfirmed -- Thinkpad R51 won't hibernate https://launchpad.net/bugs/54382 From ilmari.vacklin at helsinki.fi Fri Jul 28 18:35:57 2006 From: ilmari.vacklin at helsinki.fi (Ilmari Vacklin) Date: Fri, 28 Jul 2006 18:35:57 -0000 Subject: [Bug 54382] Re: Thinkpad R51 won't hibernate References: <20060728183528.29717.58342.malonedeb@gandwana.ubuntu.com> Message-ID: <20060728183558.3814.89382.malone@gangotri.ubuntu.com> -- Thinkpad R51 won't hibernate https://launchpad.net/bugs/54382 From jlm81387 at gmail.com Fri Jul 28 19:11:13 2006 From: jlm81387 at gmail.com (Josh) Date: Fri, 28 Jul 2006 19:11:13 -0000 Subject: [Bug 35293] won't record References: <20060317090441.11079.79138.malonedeb@gandwana.ubuntu.com> Message-ID: <20060728191113.3814.86389.launchpad@canonical@gangotri.ubuntu.com> Public bug reported: i have a feeling the problem goes deeper than i know but for some reason i cant record at all. my sound card doesn't seem to work right because i get output but no input. maybe my soundcard isn't yet compatable with linux. i have an on board realtek alc655 6 channel sound card and no matter how i set it i cant record. ive gone to all sorts of forums and noone else could figure it out either. help please!!! ** Affects: linux-source-2.6.15 (Ubuntu) Importance: Low Status: Needs Info -- won't record https://launchpad.net/bugs/35293 From ernstp at gmail.com Fri Jul 28 19:08:14 2006 From: ernstp at gmail.com (Ernst Persson) Date: Fri, 28 Jul 2006 19:08:14 -0000 Subject: [Bug 54366] Re: Hard lock while ripping audio cds References: <20060728140500.29548.76580.malonedeb@gandwana.ubuntu.com> Message-ID: <20060728190814.29548.66277.malone@gandwana.ubuntu.com> Here's a call trace from the kernel when the system was frozen -- Hard lock while ripping audio cds https://launchpad.net/bugs/54366 From crimsun at fungus.sh.nu Fri Jul 28 19:10:34 2006 From: crimsun at fungus.sh.nu (Daniel T Chen) Date: Fri, 28 Jul 2006 19:10:34 -0000 Subject: [Bug 35293] Re: won't record References: <20060317090441.11079.79138.malonedeb@gandwana.ubuntu.com> Message-ID: <20060728191034.29548.78144.malone@gandwana.ubuntu.com> Are you still experiencing this issue in Dapper? If so, please pastebin your ``amixer'' output. ** Changed in: audacity (Ubuntu) Importance: Medium => Low Status: Unconfirmed => Needs Info ** Changed in: audacity (Ubuntu) Sourcepackagename: audacity => linux-source-2.6.15 -- won't record https://launchpad.net/bugs/35293 From william.grant at ubuntu.com.au Fri Jul 28 21:13:37 2006 From: william.grant at ubuntu.com.au (William Grant) Date: Fri, 28 Jul 2006 21:13:37 -0000 Subject: [Bug 54366] Re: Hard lock while ripping audio cds References: <20060728140500.29548.76580.malonedeb@gandwana.ubuntu.com> Message-ID: <20060728211337.3952.24115.malone@gangotri.ubuntu.com> Thanks for the bug report. Can you please describe your hardware configuration? ** Changed in: linux-source-2.6.15 (Ubuntu Dapper) Status: Unconfirmed => Rejected ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Unconfirmed => Needs Info -- Hard lock while ripping audio cds https://launchpad.net/bugs/54366 From william.grant at ubuntu.com.au Fri Jul 28 21:21:00 2006 From: william.grant at ubuntu.com.au (William Grant) Date: Fri, 28 Jul 2006 21:21:00 -0000 Subject: [Bug 54209] Re: Error: MP-BIOS 8254 timer can't connect to IO-APIC References: <20060727000941.3814.63134.malonedeb@gangotri.ubuntu.com> Message-ID: <20060728212100.29717.37812.launchpad@gandwana.ubuntu.com> ** Changed in: kernel-image-2.6.7-i386 (Ubuntu) Status: Unconfirmed => Rejected -- Error: MP-BIOS 8254 timer can't connect to IO-APIC https://launchpad.net/bugs/54209 From william.grant at ubuntu.com.au Fri Jul 28 21:37:51 2006 From: william.grant at ubuntu.com.au (William Grant) Date: Fri, 28 Jul 2006 21:37:51 -0000 Subject: [Bug 54095] Re: monitor dim/brighten reversed (HP Pavilion dv8220ea) References: <20060726004246.22426.39308.malonedeb@gangotri.ubuntu.com> Message-ID: <20060728213751.29548.78829.malone@gandwana.ubuntu.com> I get the same on my Dell Inspiron 630m. -- monitor dim/brighten reversed (HP Pavilion dv8220ea) https://launchpad.net/bugs/54095 From rwgould at gmail.com Fri Jul 28 23:24:57 2006 From: rwgould at gmail.com (Richard Gould) Date: Fri, 28 Jul 2006 23:24:57 -0000 Subject: [Bug 47617] Re: USB Hard drive is not always detected/mounted References: <20060531051629.2224.16862.malonedeb@gangotri.ubuntu.com> Message-ID: <20060728232457.29548.53095.malone@gandwana.ubuntu.com> Ok - the problem was my fault. The USB device has a connector that does not fasten very securely. If it is partially in, the device will receive power, but not transmit data to the machine. I haven't had any problems since noticing this. So this bug can be closed/removed. I would do it myself, but I can't seem to find the close button. -- USB Hard drive is not always detected/mounted https://launchpad.net/bugs/47617 From ernstp at gmail.com Sat Jul 29 05:30:45 2006 From: ernstp at gmail.com (Ernst Persson) Date: Sat, 29 Jul 2006 05:30:45 -0000 Subject: [Bug 54366] Re: Hard lock while ripping audio cds References: <20060728140500.29548.76580.malonedeb@gandwana.ubuntu.com> Message-ID: <20060729053045.3952.61890.malone@gangotri.ubuntu.com> This is an x86 installation on a Amd64 3200+. It has a KV8-MAX3 motherbord whith 1 IDE harddrive, 2 SATA harddrives and 1 IDE DVDRW which is used for ripping cd's. -- Hard lock while ripping audio cds https://launchpad.net/bugs/54366 From robert at penz.name Sat Jul 29 07:35:07 2006 From: robert at penz.name (Robert Penz) Date: Sat, 29 Jul 2006 07:35:07 -0000 Subject: [Bug 49367] Re: EHCI Configuration Errors Cause USB Errors (Mouse, etc) References: <20060611143825.25765.40900.malonedeb@gangotri.ubuntu.com> Message-ID: <20060729073507.3952.19081.malone@gangotri.ubuntu.com> I've a similar problem but on my computer its just the other way round. With 2.6.15-23-386 its working on my VIA EPIA board and with 2.6.15-26-386 it stopped. So I decided to reopen this bug. Here are some log entries with the 2.6.15-26-386 kernel: Jul 28 00:06:53 jumpgate kernel: [17179878.780000] usb 1-2: new high speed USB device using ehci_hcd and address 2 Jul 28 00:06:54 jumpgate kernel: [17179879.780000] ehci_hcd 0000:00:10.3: Unlink after no-IRQ? Controller is probably using the wrong IRQ. Jul 28 00:07:05 jumpgate kernel: [17179890.324000] usb 1-2: device not accepting address 2, error -110 Jul 28 00:07:05 jumpgate kernel: [17179890.448000] usb 1-2: new high speed USB device using ehci_hcd and address 3 Jul 28 00:07:16 jumpgate kernel: [17179901.992000] usb 1-2: device not accepting address 3, error -110 Jul 28 00:07:17 jumpgate kernel: [17179902.108000] usb 1-2: new high speed USB device using ehci_hcd and address 4 Jul 28 00:07:27 jumpgate kernel: [17179912.532000] usb 1-2: device not accepting address 4, error -110 Jul 28 00:07:27 jumpgate kernel: [17179912.648000] usb 1-2: new high speed USB device using ehci_hcd and address 5 Jul 28 00:07:38 jumpgate kernel: [17179923.072000] usb 1-2: device not accepting address 5, error -110 If I unload the ehci_hcd modul the dvd writer is accessable at once Jul 28 16:08:22 jumpgate kernel: [17237138.096000] ehci_hcd 0000:00:10.3: remove, state 1 Jul 28 16:08:22 jumpgate kernel: [17237138.096000] usb usb1: USB disconnect, address 1 Jul 28 16:08:22 jumpgate kernel: [17237138.100000] ehci_hcd 0000:00:10.3: USB bus 1 deregistered Jul 28 16:08:22 jumpgate kernel: [17237138.100000] ACPI: PCI interrupt for device 0000:00:10.3 disabled Jul 28 16:08:22 jumpgate kernel: [17237138.340000] usb 2-2: new full speed USB device using uhci_hcd and address 2 Jul 28 16:08:23 jumpgate kernel: [17237138.664000] SCSI subsystem initialized Jul 28 16:08:23 jumpgate kernel: [17237138.692000] Initializing USB Mass Storage driver... Jul 28 16:08:23 jumpgate kernel: [17237138.696000] scsi0 : SCSI emulation for USB Mass Storage devices Jul 28 16:08:23 jumpgate kernel: [17237138.696000] usb-storage: device found at 2 Jul 28 16:08:23 jumpgate kernel: [17237138.696000] usb-storage: waiting for device to settle before scanning Jul 28 16:08:23 jumpgate kernel: [17237138.696000] usbcore: registered new driver usb-storage Jul 28 16:08:23 jumpgate kernel: [17237138.696000] USB Mass Storage support registered. Jul 28 16:08:28 jumpgate kernel: [17237143.732000] Vendor: HL-DT-ST Model: DVDRRW GSA-2164D Rev: 1.01 Jul 28 16:08:28 jumpgate kernel: [17237143.732000] Type: CD-ROM ANSI SCSI revision: 00 Jul 28 16:08:28 jumpgate kernel: [17237143.744000] usb-storage: device scan complete Jul 28 16:08:28 jumpgate kernel: [17237143.832000] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray Jul 28 16:08:28 jumpgate kernel: [17237143.836000] Uniform CD-ROM driver Revision: 3.20 Jul 28 16:08:28 jumpgate kernel: [17237143.836000] sr 0:0:0:0: Attached scsi CD-ROM sr0 Jul 28 16:08:28 jumpgate kernel: [17237143.872000] sr 0:0:0:0: Attached scsi generic sg0 type 5 on 2.6.15-23-386 it looks like that: Jul 28 17:13:45 jumpgate kernel: [4294678.112000] usb 4-2: new high speed USB device using ehci_hcd and address 2 Jul 28 17:13:45 jumpgate kernel: [4294678.202000] Attempting manual resume Jul 28 17:13:45 jumpgate kernel: [4294678.288000] SCSI subsystem initialized Jul 28 17:13:45 jumpgate kernel: [4294678.295000] Initializing USB Mass Storage driver... Jul 28 17:13:45 jumpgate kernel: [4294678.296000] scsi0 : SCSI emulation for USB Mass Storage devices Jul 28 17:13:45 jumpgate kernel: [4294678.297000] usb-storage: device found at 2 Jul 28 17:13:45 jumpgate kernel: [4294678.297000] usb-storage: waiting for device to settle before scanning Jul 28 17:13:45 jumpgate kernel: [4294678.297000] usbcore: registered new driver usb-storage Jul 28 17:13:45 jumpgate kernel: [4294678.297000] USB Mass Storage support registered. Jul 28 17:13:45 jumpgate kernel: [4294678.307000] EXT3-fs: mounted filesystem with ordered data mode. Jul 28 17:13:45 jumpgate kernel: [4294678.340000] kjournald starting. Commit interval 5 seconds Jul 28 17:13:45 jumpgate kernel: [4294683.333000] Vendor: HL-DT-ST Model: DVDRRW GSA-2164D Rev: 1.01 Jul 28 17:13:45 jumpgate kernel: [4294683.333000] Type: CD-ROM ANSI SCSI revision: 00 Jul 28 17:13:45 jumpgate kernel: [4294683.333000] usb-storage: device scan complete Jul 28 17:13:45 jumpgate kernel: [4294684.685000] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray Jul 28 17:13:45 jumpgate kernel: [4294684.685000] Uniform CD-ROM driver Revision: 3.20 Jul 28 17:13:45 jumpgate kernel: [4294684.685000] sr 0:0:0:0: Attached scsi CD-ROM sr0 Jul 28 17:13:45 jumpgate kernel: [4294684.728000] sr 0:0:0:0: Attached scsi generic sg0 type 5 -- EHCI Configuration Errors Cause USB Errors (Mouse, etc) https://launchpad.net/bugs/49367 From robert at penz.name Sat Jul 29 07:42:52 2006 From: robert at penz.name (Robert Penz) Date: Sat, 29 Jul 2006 07:42:52 -0000 Subject: [Bug 54419] usb change between 2.6.15-23 and 2.6.15-26 breaks working setup References: <20060729074252.3952.45596.malonedeb@gangotri.ubuntu.com> Message-ID: <20060729074252.3952.45596.malonedeb@gangotri.ubuntu.com> Public bug reported: This link points to an bug report which got fixed in 2.6.15-26 : https://launchpad.net/distros/ubuntu/+source/linux- source-2.6.15/+bug/49367 But it creates also a problem on my computer. With 2.6.15-23-386 its working on my VIA EPIA board and with 2.6.15-26-386 it stopped. I added an comment to the above bug, but I was not able to reopen it so I openning a new one. Sorry. Here are some log entries with the 2.6.15-26-386 kernel: Jul 28 00:06:53 jumpgate kernel: [17179878.780000] usb 1-2: new high speed USB device using ehci_hcd and address 2 Jul 28 00:06:54 jumpgate kernel: [17179879.780000] ehci_hcd 0000:00:10.3: Unlink after no-IRQ? Controller is probably using the wrong IRQ. Jul 28 00:07:05 jumpgate kernel: [17179890.324000] usb 1-2: device not accepting address 2, error -110 Jul 28 00:07:05 jumpgate kernel: [17179890.448000] usb 1-2: new high speed USB device using ehci_hcd and address 3 Jul 28 00:07:16 jumpgate kernel: [17179901.992000] usb 1-2: device not accepting address 3, error -110 Jul 28 00:07:17 jumpgate kernel: [17179902.108000] usb 1-2: new high speed USB device using ehci_hcd and address 4 Jul 28 00:07:27 jumpgate kernel: [17179912.532000] usb 1-2: device not accepting address 4, error -110 Jul 28 00:07:27 jumpgate kernel: [17179912.648000] usb 1-2: new high speed USB device using ehci_hcd and address 5 Jul 28 00:07:38 jumpgate kernel: [17179923.072000] usb 1-2: device not accepting address 5, error -110 If I unload the ehci_hcd modul the dvd writer is accessable at once Jul 28 16:08:22 jumpgate kernel: [17237138.096000] ehci_hcd 0000:00:10.3: remove, state 1 Jul 28 16:08:22 jumpgate kernel: [17237138.096000] usb usb1: USB disconnect, address 1 Jul 28 16:08:22 jumpgate kernel: [17237138.100000] ehci_hcd 0000:00:10.3: USB bus 1 deregistered Jul 28 16:08:22 jumpgate kernel: [17237138.100000] ACPI: PCI interrupt for device 0000:00:10.3 disabled Jul 28 16:08:22 jumpgate kernel: [17237138.340000] usb 2-2: new full speed USB device using uhci_hcd and address 2 Jul 28 16:08:23 jumpgate kernel: [17237138.664000] SCSI subsystem initialized Jul 28 16:08:23 jumpgate kernel: [17237138.692000] Initializing USB Mass Storage driver... Jul 28 16:08:23 jumpgate kernel: [17237138.696000] scsi0 : SCSI emulation for USB Mass Storage devices Jul 28 16:08:23 jumpgate kernel: [17237138.696000] usb-storage: device found at 2 Jul 28 16:08:23 jumpgate kernel: [17237138.696000] usb-storage: waiting for device to settle before scanning Jul 28 16:08:23 jumpgate kernel: [17237138.696000] usbcore: registered new driver usb-storage Jul 28 16:08:23 jumpgate kernel: [17237138.696000] USB Mass Storage support registered. Jul 28 16:08:28 jumpgate kernel: [17237143.732000] Vendor: HL-DT-ST Model: DVDRRW GSA-2164D Rev: 1.01 Jul 28 16:08:28 jumpgate kernel: [17237143.732000] Type: CD-ROM ANSI SCSI revision: 00 Jul 28 16:08:28 jumpgate kernel: [17237143.744000] usb-storage: device scan complete Jul 28 16:08:28 jumpgate kernel: [17237143.832000] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray Jul 28 16:08:28 jumpgate kernel: [17237143.836000] Uniform CD-ROM driver Revision: 3.20 Jul 28 16:08:28 jumpgate kernel: [17237143.836000] sr 0:0:0:0: Attached scsi CD-ROM sr0 Jul 28 16:08:28 jumpgate kernel: [17237143.872000] sr 0:0:0:0: Attached scsi generic sg0 type 5 on 2.6.15-23-386 it looks like that: Jul 28 17:13:45 jumpgate kernel: [4294678.112000] usb 4-2: new high speed USB device using ehci_hcd and address 2 Jul 28 17:13:45 jumpgate kernel: [4294678.202000] Attempting manual resume Jul 28 17:13:45 jumpgate kernel: [4294678.288000] SCSI subsystem initialized Jul 28 17:13:45 jumpgate kernel: [4294678.295000] Initializing USB Mass Storage driver... Jul 28 17:13:45 jumpgate kernel: [4294678.296000] scsi0 : SCSI emulation for USB Mass Storage devices Jul 28 17:13:45 jumpgate kernel: [4294678.297000] usb-storage: device found at 2 Jul 28 17:13:45 jumpgate kernel: [4294678.297000] usb-storage: waiting for device to settle before scanning Jul 28 17:13:45 jumpgate kernel: [4294678.297000] usbcore: registered new driver usb-storage Jul 28 17:13:45 jumpgate kernel: [4294678.297000] USB Mass Storage support registered. Jul 28 17:13:45 jumpgate kernel: [4294678.307000] EXT3-fs: mounted filesystem with ordered data mode. Jul 28 17:13:45 jumpgate kernel: [4294678.340000] kjournald starting. Commit interval 5 seconds Jul 28 17:13:45 jumpgate kernel: [4294683.333000] Vendor: HL-DT-ST Model: DVDRRW GSA-2164D Rev: 1.01 Jul 28 17:13:45 jumpgate kernel: [4294683.333000] Type: CD-ROM ANSI SCSI revision: 00 Jul 28 17:13:45 jumpgate kernel: [4294683.333000] usb-storage: device scan complete Jul 28 17:13:45 jumpgate kernel: [4294684.685000] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray Jul 28 17:13:45 jumpgate kernel: [4294684.685000] Uniform CD-ROM driver Revision: 3.20 Jul 28 17:13:45 jumpgate kernel: [4294684.685000] sr 0:0:0:0: Attached scsi CD-ROM sr0 Jul 28 17:13:45 jumpgate kernel: [4294684.728000] sr 0:0:0:0: Attached scsi generic sg0 type 5 ** Affects: linux-source-2.6.15 (Ubuntu) Importance: Untriaged Status: Unconfirmed -- usb change between 2.6.15-23 and 2.6.15-26 breaks working setup https://launchpad.net/bugs/54419 From dennis at kaarsemaker.net Sat Jul 29 09:31:25 2006 From: dennis at kaarsemaker.net (Dennis Kaarsemaker) Date: Sat, 29 Jul 2006 09:31:25 -0000 Subject: [Bug 47617] Re: [Bug 47617] Re: USB Hard drive is not always detected/mounted References: <20060531051629.2224.16862.malonedeb@gangotri.ubuntu.com> <20060728232457.29548.53095.malone@gandwana.ubuntu.com> Message-ID: <1154165485.30777.48.camel@mirage> status Rejected ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Unconfirmed => Rejected -- USB Hard drive is not always detected/mounted https://launchpad.net/bugs/47617 From kamping_kaiser at internode.on.net Sat Jul 29 10:17:45 2006 From: kamping_kaiser at internode.on.net (KarlGoetz) Date: Sat, 29 Jul 2006 10:17:45 -0000 Subject: [Bug 21913] Re: Restricted modules not available during installation References: <20060113141524.21012.64569.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060729101746.29717.77127.malone@gandwana.ubuntu.com> I'm under the impression that dapper now loads these modules during boot. If this is the case can this bug be closed? -- Restricted modules not available during installation https://launchpad.net/bugs/21913 From golfbuf at gmail.com Sat Jul 29 11:24:25 2006 From: golfbuf at gmail.com (golfbuf) Date: Sat, 29 Jul 2006 11:24:25 -0000 Subject: [Bug 50323] Re: system freezes after last kernel update References: <20060619110659.20041.85554.malonedeb@gangotri.ubuntu.com> Message-ID: <20060729112425.29717.96282.malone@gandwana.ubuntu.com> I have tested the latest update to the kernel, linux-image-2.6.15-26-686 version 2.6.15-26.45 and still have this freeze up. -- system freezes after last kernel update https://launchpad.net/bugs/50323 From ev00rg at excite.com Sat Jul 29 13:43:11 2006 From: ev00rg at excite.com (gr00ve) Date: Sat, 29 Jul 2006 13:43:11 -0000 Subject: [Bug 54444] Only front left right speaker work Audigy 4 OEM References: <20060729134311.3814.13088.malonedeb@gangotri.ubuntu.com> Message-ID: <20060729134311.3814.13088.malonedeb@gangotri.ubuntu.com> Public bug reported: Binary package hint: linux-source-2.6.15 just like here https://launchpad.net/distros/ubuntu/+source/linux-source-2.6.15/+bug/46233 on sound blaster audigy 4 there is no sound except front left/right channels. moreover the card itself is not properly recognized, below is output of lspci | grep Audigy 0000:00:07.0 Multimedia audio controller: Creative Labs SB0400 Audigy2 Value same as dmesg | grep Audigy [17179590.104000] Audigy2 value: Special config. ** Affects: linux-source-2.6.15 (Ubuntu) Importance: Untriaged Status: Unconfirmed -- Only front left right speaker work Audigy 4 OEM https://launchpad.net/bugs/54444 From kamping_kaiser at internode.on.net Sat Jul 29 15:18:47 2006 From: kamping_kaiser at internode.on.net (KarlGoetz) Date: Sat, 29 Jul 2006 15:18:47 -0000 Subject: [Bug 44332] Re: device nodes not being created for external usb harddrive References: <20060512054017.15115.67672.malonedeb@gandwana.ubuntu.com> Message-ID: <20060729151847.29548.62287.malone@gandwana.ubuntu.com> I no longer have access to this device, so this bug can be rejected if you want. -- device nodes not being created for external usb harddrive https://launchpad.net/bugs/44332 From ev00rg at excite.com Sat Jul 29 23:16:11 2006 From: ev00rg at excite.com (gr00ve) Date: Sat, 29 Jul 2006 23:16:11 -0000 Subject: [Bug 54444] Re: Only front left right speaker work Audigy 4 OEM (post upgrade from Audigy 2) References: <20060729134311.3814.13088.malonedeb@gangotri.ubuntu.com> Message-ID: <20060729231611.3814.85496.launchpad@gangotri.ubuntu.com> ** Summary changed: - Only front left right speaker work Audigy 4 OEM + Only front left right speaker work Audigy 4 OEM (post upgrade from Audigy 2) ** Description changed: Binary package hint: linux-source-2.6.15 just like here https://launchpad.net/distros/ubuntu/+source/linux-source-2.6.15/+bug/46233 on sound blaster audigy 4 there is no sound except front left/right channels. moreover the card itself is not properly recognized, below is output of lspci | grep Audigy 0000:00:07.0 Multimedia audio controller: Creative Labs SB0400 Audigy2 Value same as dmesg | grep Audigy [17179590.104000] Audigy2 value: Special config. + + /i just reinstalled from scratch - all channels work now/ + + seems to be that when cards were replaced new card was not "picked up" -- Only front left right speaker work Audigy 4 OEM (post upgrade from Audigy 2) https://launchpad.net/bugs/54444 From dean.s.wood at gmail.com Sun Jul 30 00:14:48 2006 From: dean.s.wood at gmail.com (Dean) Date: Sun, 30 Jul 2006 00:14:48 -0000 Subject: [Bug 54273] Re: USB device not accepting address: error -110 References: <20060727175359.29548.78878.malonedeb@gandwana.ubuntu.com> Message-ID: <20060730001448.3814.64181.malone@gangotri.ubuntu.com> I have exactly the same problem. Printouts are identical. Error messages stop when ehci_hcd is removed but am still unable to mount usb. I have looked around to find a solution and it seems this is a reasonably common problem. -- USB device not accepting address: error -110 https://launchpad.net/bugs/54273 From flo_54321 at web.de Sun Jul 30 08:21:25 2006 From: flo_54321 at web.de (infu) Date: Sun, 30 Jul 2006 08:21:25 -0000 Subject: [Bug 48395] Re: ipw3945 produces 99% cpu, making my laptop unusable References: <20060604183717.4978.25428.malonedeb@gandwana.ubuntu.com> Message-ID: <20060730082125.3814.80324.malone@gangotri.ubuntu.com> As far as I observed now the ipw3945/0 does NOT run everytime I boot my laptop. It happens from time to time, but I can't say when it happens and when not. -- ipw3945 produces 99% cpu, making my laptop unusable https://launchpad.net/bugs/48395 From ubuntu at rjconnell.com Sun Jul 30 08:40:47 2006 From: ubuntu at rjconnell.com (Connell) Date: Sun, 30 Jul 2006 08:40:47 -0000 Subject: [Bug 54513] DHCP and DNS do not function on eth0 with kernel 2.6.15-26-k7 - works fine with 2.6.15-25-k7 References: <20060730023434.3814.5978.malonedeb@gangotri.ubuntu.com> Message-ID: <20060730084047.29548.89977.launchpad@canonical@gandwana.ubuntu.com> Public bug reported: System tested on: AMD Athlon XP 2100+, 1GB DDS eth0: NForce2 Ethernet Controler eth1: 3com 3C902B-EMB Integrated Fast Ethernet Controler [Tornado] Related Posts: http://ubuntuforums.org/showthread.php?t=214111 When I run 2.6.15-26-k7 on 6.06, my eth0 connection does not function corectly. I am able to ping specific IP Addresses if set up with a Static IP Address, but DNS does not resolve any addresses. Additionally if set up with DHCP I am unable to obtain any IP Address. (eth1 works without problem). When I run 2.6.15-25-k7 with the same exact settings eth0 works flawlessly with both DHCP and Static IP. ** Affects: linux-source-2.6.15 (Ubuntu) Importance: Untriaged Status: Unconfirmed -- DHCP and DNS do not function on eth0 with kernel 2.6.15-26-k7 - works fine with 2.6.15-25-k7 https://launchpad.net/bugs/54513 From dennis at kaarsemaker.net Sun Jul 30 08:40:47 2006 From: dennis at kaarsemaker.net (Dennis Kaarsemaker) Date: Sun, 30 Jul 2006 08:40:47 -0000 Subject: [Bug 54513] Re: DHCP and DNS do not function on eth0 with kernel 2.6.15-26-k7 - works fine with 2.6.15-25-k7 References: <20060730023434.3814.5978.malonedeb@gangotri.ubuntu.com> Message-ID: <20060730084047.29548.96719.launchpad@gandwana.ubuntu.com> ** Changed in: Ubuntu Sourcepackagename: None => linux-source-2.6.15 -- DHCP and DNS do not function on eth0 with kernel 2.6.15-26-k7 - works fine with 2.6.15-25-k7 https://launchpad.net/bugs/54513 From David.Whyte at Gmail.com Sun Jul 30 12:06:30 2006 From: David.Whyte at Gmail.com (DavidWhyte) Date: Sun, 30 Jul 2006 12:06:30 -0000 Subject: [Bug 53207] Re: Sound misfunctions with kernel 2.6.15-26-386 on Jetway MB References: <20060717050214.1931.83828.malonedeb@gangotri.ubuntu.com> Message-ID: <20060730120630.3952.77878.malone@gangotri.ubuntu.com> This looks like duplicate of bug#52649, which I just added to. -- Sound misfunctions with kernel 2.6.15-26-386 on Jetway MB https://launchpad.net/bugs/53207 From David.Whyte at Gmail.com Sun Jul 30 12:04:58 2006 From: David.Whyte at Gmail.com (DavidWhyte) Date: Sun, 30 Jul 2006 12:04:58 -0000 Subject: [Bug 52649] Re: After installing the latest Linux kernel with Update Manager, Gnome start not normal. References: <20060711150321.27257.34756.malonedeb@gangotri.ubuntu.com> Message-ID: <20060730120458.3814.19587.malone@gangotri.ubuntu.com> I just updated from Breezy to Dapper and have come across this issue. The Dapper upgrade has installed the 2.6.15.26-386 kernel image and since then, the computer is almost unusable at initial bootup and the Ubuntu drums continually repeat. Once the repeating stops, the PC returns to normal performance (AFAIK), however, sound is now unusable. I have a VIA KM266Pro chipset with a VIA VT8235 South Bridge. Audio is all onboard. The motherboard user manual states the audio specifications as: - AC'97 Digital Audio Controller integrated, - AC'97 Audio CODEC on board. Since this is my first Dapper kernel, I am unable to revert to the most recent kernel as for me this is 2.6.12.10 and is likely incompatible with Dapper. -- After installing the latest Linux kernel with Update Manager, Gnome start not normal. https://launchpad.net/bugs/52649 From David.Whyte at Gmail.com Sun Jul 30 12:08:47 2006 From: David.Whyte at Gmail.com (DavidWhyte) Date: Sun, 30 Jul 2006 12:08:47 -0000 Subject: [Bug 52649] Re: After installing the latest Linux kernel with Update Manager, Gnome start not normal. References: <20060711150321.27257.34756.malonedeb@gangotri.ubuntu.com> Message-ID: <20060730120847.29548.68280.malone@gandwana.ubuntu.com> And for the record, I am using a Jetway V2DP motherboard. Also, I notice that there is what appears to be a duplicate - bug#53207. -- After installing the latest Linux kernel with Update Manager, Gnome start not normal. https://launchpad.net/bugs/52649 From DanZachry at yahoo.com Sun Jul 30 15:14:31 2006 From: DanZachry at yahoo.com (DanZachry) Date: Sun, 30 Jul 2006 15:14:31 -0000 Subject: [Bug 54554] CPU Overheating References: <20060730150444.3814.37640.malonedeb@gangotri.ubuntu.com> Message-ID: <20060730151431.3952.30052.launchpad@canonical@gangotri.ubuntu.com> Public bug reported: Binary package hint: acpi The CPU overheats. The CPU fan will not turn on. To reproduce problem: 1) Install kubuntu 6.06 2) run gzip -9 ( dd if=/dev/hda1 | gzip -9 >/media/sda1/backup.gz ) 3) cat /proc/acpi/thermal_zone/THZN/temperature Problem: 1) Temperature reached 92C 2) The fan never turned on. The thermal module (lsmod | grep therm) is loaded on my installtion. This was on a HP Pavilion dv1000 laptop ** Affects: linux-source-2.6.15 (Ubuntu) Importance: Untriaged Status: Unconfirmed -- CPU Overheating https://launchpad.net/bugs/54554 From mjg59 at codon.org.uk Sun Jul 30 15:14:31 2006 From: mjg59 at codon.org.uk (Matthew Garrett) Date: Sun, 30 Jul 2006 15:14:31 -0000 Subject: [Bug 54554] Re: CPU Overheating References: <20060730150444.3814.37640.malonedeb@gangotri.ubuntu.com> Message-ID: <20060730151431.3952.73921.launchpad@gangotri.ubuntu.com> ** Changed in: acpi (Ubuntu) Sourcepackagename: acpi => linux-source-2.6.15 -- CPU Overheating https://launchpad.net/bugs/54554 From shahamit at gmail.com Sun Jul 30 15:13:13 2006 From: shahamit at gmail.com (Amit Shah) Date: Sun, 30 Jul 2006 15:13:13 -0000 Subject: [Bug 38851] Re: Problems accessing Sony DRU-810A DVD drive References: <20060409104131.32313.6704.malonedeb@gandwana.ubuntu.com> Message-ID: <20060730151313.3952.97384.malone@gangotri.ubuntu.com> I could write to a DVD+RW using K3b 0.12.14 on a default Kubuntu 6.06 LTS release with KDE 3.5.3 packages downloaded from kubuntu.org. Kernel is 2.6.15-26-386 -- Problems accessing Sony DRU-810A DVD drive https://launchpad.net/bugs/38851 From ubuntu at rjconnell.com Sun Jul 30 15:55:13 2006 From: ubuntu at rjconnell.com (Connell) Date: Sun, 30 Jul 2006 15:55:13 -0000 Subject: [Bug 54513] Re: DHCP and DNS do not function on eth0 with kernel 2.6.15-26-k7 - works fine with 2.6.15-25-k7 References: <20060730023434.3814.5978.malonedeb@gangotri.ubuntu.com> Message-ID: <20060730155513.3952.80594.malone@gangotri.ubuntu.com> Disabling IPv6 does help (I was able to boot with the 2.6.15-26-k7 kernel and use the internet with DNS working), but when I did an 'ifconfig eth0 down' followed by an 'ifconfig eth0 up' (or /etc/init.d/networking stop followed by /etc/init.d/networking start) again I can access the internet via IP Addresses, but have no DNS, and am unable to obtain an IP via DHCP. -- DHCP and DNS do not function on eth0 with kernel 2.6.15-26-k7 - works fine with 2.6.15-25-k7 https://launchpad.net/bugs/54513 From ubuntu at treblig.org Sun Jul 30 17:18:00 2006 From: ubuntu at treblig.org (Dave Gilbert) Date: Sun, 30 Jul 2006 17:18:00 -0000 Subject: [Bug 46510] Re: At boot doesn't recognize aic9405 controller sas/sata References: <20060525073352.24699.17372.malonedeb@gangotri.ubuntu.com> Message-ID: <20060730171800.3952.29589.malone@gangotri.ubuntu.com> Can someone merge 53138 that I filed into this one; it just looks like the driver doesn't get put into the initrd; the driver in the kernel works fine for me. (38421 could probably also merge?) -- At boot doesn't recognize aic9405 controller sas/sata https://launchpad.net/bugs/46510 From robitaille at fastmail.fm Sun Jul 30 17:29:43 2006 From: robitaille at fastmail.fm (Daniel Robitaille) Date: Sun, 30 Jul 2006 17:29:43 -0000 Subject: [Bug 46510] Re: At boot doesn't recognize aic9405 controller sas/sata References: <20060525073352.24699.17372.malonedeb@gangotri.ubuntu.com> Message-ID: <20060730172944.3952.75050.launchpad@gangotri.ubuntu.com> ** Bug 53138 has been marked a duplicate of this bug -- At boot doesn't recognize aic9405 controller sas/sata https://launchpad.net/bugs/46510 From robitaille at fastmail.fm Sun Jul 30 17:29:43 2006 From: robitaille at fastmail.fm (Daniel Robitaille) Date: Sun, 30 Jul 2006 17:29:43 -0000 Subject: [Bug 53138] Re: initrd missing modules on install, IBM x206m (Adaptec aic94xx) References: <20060716124851.2126.60500.malonedeb@gandwana.ubuntu.com> Message-ID: <20060730172943.3952.57711.launchpad@gangotri.ubuntu.com> *** This bug is a duplicate of bug 46510 *** ** This bug has been marked a duplicate of bug 46510 At boot doesn't recognize aic9405 controller sas/sata -- initrd missing modules on install, IBM x206m (Adaptec aic94xx) https://launchpad.net/bugs/53138 From mdz at ubuntu.com Sun Jul 30 18:19:50 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Sun, 30 Jul 2006 18:19:50 -0000 Subject: [Bug 6367] Re: udev enumeration should use /sys/bus not /sys/devices References: <20060102180911.29335.17628.malonedeb@gangotri.ubuntu.com> Message-ID: <20060730181950.29548.50099.malone@gandwana.ubuntu.com> Scott, now that the uuid mounting changes are in, can we go ahead and throw this switch? -- udev enumeration should use /sys/bus not /sys/devices https://launchpad.net/bugs/6367 From max at nusquama.org Sun Jul 30 19:15:59 2006 From: max at nusquama.org (Max Vozeler) Date: Sun, 30 Jul 2006 19:15:59 -0000 Subject: [Bug 39315] Re: Keyboard random repeat References: <20060412160910.15436.50293.malonedeb@gangotri.ubuntu.com> Message-ID: <20060730191559.3952.10567.malone@gangotri.ubuntu.com> We are also seeing this problem on an Acer Travelmate 4000 with kernel 2.6.15-26-686 (2.6.15-26.45). Repeatedly querying the battery status like below causes most key presses to be lost (about 1 in 10 works) and makes the mouse move in a jerky way: $ while :; do cat /proc/acpi/battery/BAT0/state; done Adding "i8042.nomux=1" to kernel cmdline made no noticable difference. -- Keyboard random repeat https://launchpad.net/bugs/39315 From nico at rdo.homelinux.org Sun Jul 30 19:26:48 2006 From: nico at rdo.homelinux.org (Nico) Date: Sun, 30 Jul 2006 19:26:48 -0000 Subject: [Bug 43961] Re: Power down after shutdown does not work... References: <20060510072310.21520.62027.malonedeb@gandwana.ubuntu.com> Message-ID: <20060730192648.29548.5886.malone@gandwana.ubuntu.com> I'll put another coin in the jukebox, for consistency's sake. Same poweroff problem on a Desktop Shuttle SB81P with latest BIOS, Dapper, 686 kernel and Dapper. I think I have read that the problem is known but that we should not expect any fix, just maybe in a kernel security update. We've gone through quite a few kernel updates since the Dapper release, and still no fix. LTS, LTS... Stable... I fear that the stability pact is either not very well respected, or just used as an excuse. I know about reports of graphics Intel chipset issues that are a hit or miss depending on the kernel release revision... Could we at least have a clear explanation of the problem? This may help those of us not scare of building a kernel package ourselves. Thanks, Nico -- Power down after shutdown does not work... https://launchpad.net/bugs/43961 From alex at blarf.homeip.net Sun Jul 30 23:49:17 2006 From: alex at blarf.homeip.net (Alex Zepeda) Date: Sun, 30 Jul 2006 23:49:17 -0000 Subject: [Bug 43961] Re: Power down after shutdown does not work... References: <20060510072310.21520.62027.malonedeb@gandwana.ubuntu.com> Message-ID: <20060730234917.29717.59175.malone@gandwana.ubuntu.com> I ran into the same problem when I upgraded from the stock Ubuntu 2.6.15-xxx kernel to a 'custom' 2.6.17.7 kernel. My goal was to get Suspend2 working. Actually, I ran into this problem while trying to get usplash to work. Turns out that the ATI framebuffer drivers were causing problems. With these removed: CONFIG_FB_AT CONFIG_FB_ATY_CT CONFIG_FB_ATY_GENERIC_LCD The system reboots just fine now. Now, it would be nice to get the higher resolution console that the ATI drivers provide, but for now I'll enjoy being able to suspend and reboot. My system is a Compaq Armada M700 with a Mach64 based video setup. This ATI hardware has been nothing but trouble and disappointment. -- Power down after shutdown does not work... https://launchpad.net/bugs/43961 From luke.hoersten at gmail.com Mon Jul 31 00:36:56 2006 From: luke.hoersten at gmail.com (Luke Hoersten) Date: Mon, 31 Jul 2006 00:36:56 -0000 Subject: [Bug 54273] Re: USB device not accepting address: error -110 References: <20060727175359.29548.78878.malonedeb@gandwana.ubuntu.com> Message-ID: <20060731003656.3814.45812.malone@gangotri.ubuntu.com> Dean, do you have any more resources of information about this problem? Can you list what devices you were trying to mount? I find it very strange that my printer still works but mouse, camera, ipod, and usb key do not. -- USB device not accepting address: error -110 https://launchpad.net/bugs/54273 From desrt at desrt.ca Mon Jul 31 01:28:39 2006 From: desrt at desrt.ca (Ryan Lortie) Date: Mon, 31 Jul 2006 01:28:39 -0000 Subject: [Bug 54601] disabling a CPU increases laptop power consumption References: <20060731012839.29548.56451.malonedeb@gandwana.ubuntu.com> Message-ID: <20060731012839.29548.56451.malonedeb@gandwana.ubuntu.com> Public bug reported: Binary package hint: linux-source-2.6.15 This is a bit weird. On my quest to improve battery performance on my laptop I learned about CPU hotplugging and how to take CPUs offline. When I echo '0' to the online file for my CPU1 power use actually _increases_. I assume this to be caused by CPU1 running an (effective) busy loop once it goes offline but I am unable to confirm. It would be nice if the CPU halted when taken offline. Disabling the second core of dualcore laptops would be a nice powersavings feature if it worked. ** Affects: linux-source-2.6.15 (Ubuntu) Importance: Untriaged Status: Unconfirmed -- disabling a CPU increases laptop power consumption https://launchpad.net/bugs/54601 From gluebeck at fhcrc.org Mon Jul 31 02:26:14 2006 From: gluebeck at fhcrc.org (Georg Luebeck) Date: Mon, 31 Jul 2006 02:26:14 -0000 Subject: [Bug 39227] Re: Attempts to connect to rausb0 using network tool results in a crash. References: <20060411232244.32313.85795.malonedeb@gandwana.ubuntu.com> Message-ID: <20060731022614.29717.57813.malone@gandwana.ubuntu.com> *** This bug is a duplicate of bug 34902 *** Thanks for the posting. I've experienced the same problem with a WUSB54G. Fortunately, the device activates using iwconfig ... via command line. EGL -- Attempts to connect to rausb0 using network tool results in a crash. https://launchpad.net/bugs/39227 From peterbe at sonic.net Mon Jul 31 06:06:02 2006 From: peterbe at sonic.net (Peter Belew) Date: Mon, 31 Jul 2006 06:06:02 -0000 Subject: [Bug 52649] Re: After installing the latest Linux kernel with Update Manager, Gnome start not normal. References: <20060711150321.27257.34756.malonedeb@gangotri.ubuntu.com> Message-ID: <20060731060603.3952.91782.malone@gangotri.ubuntu.com> This indeed looks like a duplicate to bug#53207. I'm using a Jetway 625EMP800 motherboard on the system I have the problem with. Disabling sound for a particular user by taking that user out of the audio group keeps the repeated sound (and any sound!) from happening, but the drumming or repeated sound still happens when the login screen is up. (Also the default screensaver hangs the system - that may be related - I'll have to investigate that later on.) -- After installing the latest Linux kernel with Update Manager, Gnome start not normal. https://launchpad.net/bugs/52649 From desrt at desrt.ca Mon Jul 31 06:38:13 2006 From: desrt at desrt.ca (Ryan Lortie) Date: Mon, 31 Jul 2006 06:38:13 -0000 Subject: [Bug 54601] Re: disabling a CPU increases laptop power consumption References: <20060731012839.29548.56451.malonedeb@gandwana.ubuntu.com> Message-ID: <20060731063813.3952.97642.malone@gangotri.ubuntu.com> Bug is in edgy kernel too. -- disabling a CPU increases laptop power consumption https://launchpad.net/bugs/54601 From clayton at cjrogers.net Mon Jul 31 08:21:32 2006 From: clayton at cjrogers.net (Clayton Rogers) Date: Mon, 31 Jul 2006 08:21:32 -0000 Subject: [Bug 48556] Re: ACPI-0517: ****Error Method parse/execudion failed References: <20060605175228.5989.15658.malonedeb@gangotri.ubuntu.com> Message-ID: <20060731082132.3952.55889.malone@gangotri.ubuntu.com> Has anyone got a solution to this yet? I too am experiencing a similar error on a Toshiba Tecra A4 with the nvidia driver. Unable to use the X environment because it is slow and dmesg keeps displaying the error: ACPI-0240: *** Error: Cannot release Mutex [MUT1], not acquired -- ACPI-0517: ****Error Method parse/execudion failed https://launchpad.net/bugs/48556 From Sergio.Gelato at astro.su.se Mon Jul 31 09:01:04 2006 From: Sergio.Gelato at astro.su.se (Sergio Gelato) Date: Mon, 31 Jul 2006 09:01:04 -0000 Subject: [Bug 54632] missing curly braces in fix for CVE-2005-3805 References: <20060731090104.3814.58267.malonedeb@gangotri.ubuntu.com> Message-ID: <20060731090104.3814.58267.malonedeb@gangotri.ubuntu.com> Public bug reported: Binary package hint: linux-source-2.6.12 The patch kernel-exit_CVE-2005-3805.dpatch reads in part: if (group_dead) + exit_itimers(tsk->signal); acct_process(code); exit_mm(tsk); Either the acct_process(code); line is incorrectly indented or (more likely) someone forgot to add curly braces: if (group_dead) { exit_itimers(tsk->signal); acct_process(code); } exit_mm(tsk); ** Affects: linux-source-2.6.12 (Ubuntu) Importance: Untriaged Status: Unconfirmed -- missing curly braces in fix for CVE-2005-3805 https://launchpad.net/bugs/54632 From rak at rkerbitz.de Mon Jul 31 09:51:21 2006 From: rak at rkerbitz.de (rak) Date: Mon, 31 Jul 2006 09:51:21 -0000 Subject: [Bug 24925] Re: Unlink after no-IRQ References: <20060113143135.21012.9317.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060731095121.3814.32231.malone@gangotri.ubuntu.com> I have the same Problem with a USB attached IDE harddisk and I am using a fresh installed and up to date Dapper 6.06 LTS with k7-kernel. It seems to me that the problem came with one of the newer kernel updates, because before I reinstalled my computer I could switch back to an older kernel and the drive worked fine. But I don't know which the newest kernel image it was, that worked with the drive. -- Unlink after no-IRQ https://launchpad.net/bugs/24925 From lsmaneuf at wanadoo.fr Mon Jul 31 11:46:51 2006 From: lsmaneuf at wanadoo.fr (Serge Maneuf) Date: Mon, 31 Jul 2006 11:46:51 -0000 Subject: [Bug 41779] Re: webcam error - ov511.c: No decompressor available References: <20060427175830.30606.4544.malonedeb@gangotri.ubuntu.com> Message-ID: <20060731114651.3814.56438.malone@gangotri.ubuntu.com> Ubuntu 6.06 LTS Webcam Philips PCVC820K To Ucam II : chip OV6630AF bridge OV518. KERNEL 2.6.15-26-386 and OV511 V1.64 ( delivered with the kernel ) : ERROR : No decompressor available KERNEL 2.6.15-23-386 and OV511 V2.32 : OK KERNEL 2.6.15-26-386 and OV511 V2.32 : ERROR : ov511: Unknown symbol v4l2_ioctl_names Detailed and dmesg in attachement. -- webcam error - ov511.c: No decompressor available https://launchpad.net/bugs/41779 From scott at ubuntu.com Mon Jul 31 12:08:21 2006 From: scott at ubuntu.com (Scott James Remnant) Date: Mon, 31 Jul 2006 12:08:21 -0000 Subject: [Bug 6367] Re: udev enumeration should use /sys/bus not /sys/devices References: <20060102180911.29335.17628.malonedeb@gangotri.ubuntu.com> Message-ID: <20060731120821.3814.89356.malone@gangotri.ubuntu.com> This has been in edgy since the new udev was uploaded ages ago -- udev enumeration should use /sys/bus not /sys/devices https://launchpad.net/bugs/6367 From scott at ubuntu.com Mon Jul 31 12:11:47 2006 From: scott at ubuntu.com (Scott James Remnant) Date: Mon, 31 Jul 2006 12:11:47 -0000 Subject: [Bug 44332] Re: device nodes not being created for external usb harddrive References: <20060512054017.15115.67672.malonedeb@gandwana.ubuntu.com> Message-ID: <20060731121147.3952.20572.launchpad@gangotri.ubuntu.com> ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Unconfirmed => Rejected -- device nodes not being created for external usb harddrive https://launchpad.net/bugs/44332 From scott at ubuntu.com Mon Jul 31 12:08:36 2006 From: scott at ubuntu.com (Scott James Remnant) Date: Mon, 31 Jul 2006 12:08:36 -0000 Subject: [Bug 6367] Re: udev enumeration should use /sys/bus not /sys/devices References: <20060102180911.29335.17628.malonedeb@gangotri.ubuntu.com> Message-ID: <20060731120836.3952.72594.malone@gangotri.ubuntu.com> Marking as fixed (for edgy) ** Changed in: udev (Ubuntu) Status: Confirmed => Fix Released -- udev enumeration should use /sys/bus not /sys/devices https://launchpad.net/bugs/6367 From scott at ubuntu.com Mon Jul 31 12:10:47 2006 From: scott at ubuntu.com (Scott James Remnant) Date: Mon, 31 Jul 2006 12:10:47 -0000 Subject: [Bug 6367] Re: udev enumeration should use /sys/bus not /sys/devices References: <20060102180911.29335.17628.malonedeb@gangotri.ubuntu.com> Message-ID: <20060731121047.3952.17650.malone@gangotri.ubuntu.com> Marking as open in dapper -- in case we decide to backport the fix to -updates My current opinion is "NO", this broke several things in edgy (soundcard ordering, SATA vs. IDE ordering, network card ordering,etc.) Fortunately we had other things in place in edgy to fix those before they broke ** Changed in: udev (Ubuntu Dapper) Assignee: (unassigned) => Scott James Remnant Status: Unconfirmed => Confirmed -- udev enumeration should use /sys/bus not /sys/devices https://launchpad.net/bugs/6367 From johan.walles at gmail.com Mon Jul 31 14:12:46 2006 From: johan.walles at gmail.com (Johan Walles) Date: Mon, 31 Jul 2006 14:12:46 -0000 Subject: [Bug 49450] Re: 2.6.15-23-686 hangs a couple of times per week References: <20060612112731.25801.13769.malonedeb@gangotri.ubuntu.com> Message-ID: <20060731141246.29717.95562.malone@gandwana.ubuntu.com> Yet another crash. Help! -- 2.6.15-23-686 hangs a couple of times per week https://launchpad.net/bugs/49450 From kha-launchpad at hemma.treskal.com Mon Jul 31 15:16:06 2006 From: kha-launchpad at hemma.treskal.com (=?utf-8?q?Karl_Hasselstr=C3=B6m?=) Date: Mon, 31 Jul 2006 15:16:06 -0000 Subject: [Bug 52553] Re: Kernel panic - not syncing: IO-APIC + timer doesn't work! References: <20060710155757.27312.91477.malonedeb@gangotri.ubuntu.com> Message-ID: <20060731151606.29548.18550.malone@gandwana.ubuntu.com> With the -26 kernel image, I've only seen the panic once -- the very first time I booted it. Every time since then (over a dozen boots by now) it boots OK even without noapic. -- Kernel panic - not syncing: IO-APIC + timer doesn't work! https://launchpad.net/bugs/52553 From tuxmym at gmail.com Mon Jul 31 15:15:29 2006 From: tuxmym at gmail.com (mym) Date: Mon, 31 Jul 2006 15:15:29 -0000 Subject: [Bug 32893] Re: Acer Aspire 1694WLMi IRQ #10 Problems! References: <20060225225919.16580.94584.malonedeb@gandwana.ubuntu.com> Message-ID: <20060731151529.29717.27828.malone@gandwana.ubuntu.com> I have the same laptop, I use Ubuntu Dapper, and I do not have any such problems. I could do some tests for you if you want. Here is my test (with a uppercase 'I'): https://wiki.ubuntu.com/LaptopTestingTeam/AcerAspire1694WLMI -- Acer Aspire 1694WLMi IRQ #10 Problems! https://launchpad.net/bugs/32893 From peterbe at sonic.net Mon Jul 31 15:46:29 2006 From: peterbe at sonic.net (Peter Belew) Date: Mon, 31 Jul 2006 15:46:29 -0000 Subject: [Bug 53207] Re: Sound misfunctions with kernel 2.6.15-26-386 on Jetway MB References: <20060717050214.1931.83828.malonedeb@gangotri.ubuntu.com> Message-ID: <20060731154629.3952.39676.malone@gangotri.ubuntu.com> Also Bug #53163 appears to be similar. - Peter -- Sound misfunctions with kernel 2.6.15-26-386 on Jetway MB https://launchpad.net/bugs/53207 From foxsynergy at gmail.com Mon Jul 31 15:55:36 2006 From: foxsynergy at gmail.com (K. Alex Rosen) Date: Mon, 31 Jul 2006 15:55:36 -0000 Subject: [Bug 34902] Averatec 3715-EH1 definitely fixed with above :) References: <20060314143545.30082.52680.malonedeb@gandwana.ubuntu.com> Message-ID: <20060731155536.3952.54652.malone@gangotri.ubuntu.com> Just to go on record and give a big thumbs-up to you guys, I'm posting this via my wireless now. Running kernel 2.6.15-26-386. I added the "irqpoll" to my boot menu and the "DisableIRQ" to my xorg.conf. These were the only two steps necessary in order to get everything up and running like a clockwork dream. -- Ralink Wireless USB/PCMCIA/PCI hangs PC https://launchpad.net/bugs/34902 From luke.hoersten at gmail.com Mon Jul 31 17:13:20 2006 From: luke.hoersten at gmail.com (Luke Hoersten) Date: Mon, 31 Jul 2006 17:13:20 -0000 Subject: [Bug 52553] Re: Kernel panic - not syncing: IO-APIC + timer doesn't work! References: <20060710155757.27312.91477.malonedeb@gangotri.ubuntu.com> Message-ID: <20060731171321.29717.93952.malone@gandwana.ubuntu.com> Every time I try to boot (even with -26), I get the error message at least 5 reboots before it finally boots normally. It seems that if I've been running a while and then reboot, I never get the message. Like the message only occurs if my MacBook is not warmed up. -- Kernel panic - not syncing: IO-APIC + timer doesn't work! https://launchpad.net/bugs/52553 From zrchrn at gmail.com Mon Jul 31 18:32:43 2006 From: zrchrn at gmail.com (ihavenoname) Date: Mon, 31 Jul 2006 18:32:43 -0000 Subject: [Bug 34902] Re: Ralink Wireless USB/PCMCIA/PCI hangs PC References: <20060314143545.30082.52680.malonedeb@gandwana.ubuntu.com> Message-ID: <20060731183243.3952.41722.malone@gangotri.ubuntu.com> Maybe I missed this but where do I add DisableIRQ in xorg.conf?? I reccomend that the driver be spearated from the kernel. Perhaps put the extra .deb on the cd so that it can be installed via synaptic (like the ndiswrapper driver) (for the next ubuntu release that is). This would stop the problems for those who have freezes etc. And would allow those for whom the driver works well to still have easy access to it (w/o having to be connected to the internet. -- Ralink Wireless USB/PCMCIA/PCI hangs PC https://launchpad.net/bugs/34902 From ben.collins at ubuntu.com Mon Jul 31 18:53:10 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Mon, 31 Jul 2006 18:53:10 -0000 Subject: [Bug 54691] Remove source+binaries from edgy References: <20060731185310.3814.50559.malonedeb@gangotri.ubuntu.com> Message-ID: <20060731185310.3814.50559.malonedeb@gangotri.ubuntu.com> Public bug reported: Binary package hint: linux-source-2.6.15 These are no longer needed in edgy, superceded by linux-source-2.6.17. ** Affects: linux-source-2.6.15 (Ubuntu) Importance: Untriaged Status: Unconfirmed -- Remove source+binaries from edgy https://launchpad.net/bugs/54691 From foxsynergy at gmail.com Mon Jul 31 20:31:06 2006 From: foxsynergy at gmail.com (K. Alex Rosen) Date: Mon, 31 Jul 2006 20:31:06 -0000 Subject: [Bug 34902] Re: Ralink Wireless USB/PCMCIA/PCI hangs PC References: <20060314143545.30082.52680.malonedeb@gandwana.ubuntu.com> Message-ID: <20060731203106.3952.22749.malone@gangotri.ubuntu.com> > Maybe I missed this but where do I add DisableIRQ in xorg.conf?? I used muadib's suggestion and added Option "DisableIRQ" as the very last thing before EndSection . For example, my entire entry is as follows: Section "Device" Identifier "VIA Technologies, Inc. S3 Unichrome Pro VGA Adapter" Driver "via" BusID "PCI:1:0:0" Option "DisableIRQ" EndSection -- Ralink Wireless USB/PCMCIA/PCI hangs PC https://launchpad.net/bugs/34902 From ar018 at yahoo.com Mon Jul 31 20:33:30 2006 From: ar018 at yahoo.com (Abdullah Ramazanoglu) Date: Mon, 31 Jul 2006 20:33:30 -0000 Subject: [Bug 16961] Re: System freezes whilst powernowd stepping up AMD64 freq (intermittent/hoary) References: <20060113134909.21012.75586.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060731203330.3814.85052.malone@gangotri.ubuntu.com> The original problem, with the same symptoms, still exists in Kubuntu Dapper 6.06 with both default (generic) and k8 kernels. I don't include /proc/cpuinfo as this is the same CPU as the original problem report. Package version info follows: Generic kernel: linux-image-2.6.15-23-amd64-generic / 2.6.15-23.39 linux-restricted-modules-2.6.15-23-amd64-generic / 2.6.15.11-1 K8 kernel: linux-image-2.6.15-26-amd64-k8 / 2.6.15-26.44 linux-restricted-modules-2.6.15-26-amd64-k8 / 2.6.15.11-3 Other: powernowd / 0.97-1ubuntu1 For the record: Workaround is disabling /etc/init.d/powernowd with: chmod -x /etc/init.d/powernowd -- System freezes whilst powernowd stepping up AMD64 freq (intermittent/hoary) https://launchpad.net/bugs/16961 From djoker at mail.com Mon Jul 31 20:40:27 2006 From: djoker at mail.com (djoker) Date: Mon, 31 Jul 2006 20:40:27 -0000 Subject: [Bug 54561] Re: acx111 dont run with 'default' firmware References: <20060730164318.29548.58093.malonedeb@gandwana.ubuntu.com> Message-ID: <20060731204027.3814.44719.launchpad@gangotri.ubuntu.com> *** This bug is a duplicate of bug 45162 *** ** This bug has been marked a duplicate of bug 45162 Wrong acx111 PCI default firmware for DWL-G520+ -- acx111 dont run with 'default' firmware https://launchpad.net/bugs/54561 From djoker at mail.com Mon Jul 31 20:40:27 2006 From: djoker at mail.com (djoker) Date: Mon, 31 Jul 2006 20:40:27 -0000 Subject: [Bug 45162] Re: Wrong acx111 PCI default firmware for DWL-G520+ References: <20060517020232.15142.83410.malonedeb@gandwana.ubuntu.com> Message-ID: <20060731204027.3814.29738.launchpad@gangotri.ubuntu.com> ** Bug 54561 has been marked a duplicate of this bug -- Wrong acx111 PCI default firmware for DWL-G520+ https://launchpad.net/bugs/45162 From danielmewes at onlinehome.de Mon Jul 31 21:42:08 2006 From: danielmewes at onlinehome.de (danielmewes) Date: Mon, 31 Jul 2006 21:42:08 -0000 Subject: [Bug 35455] Re: After hibernate, cooling on nc6220 does not restart References: <20060318120346.12254.9646.malonedeb@gandwana.ubuntu.com> Message-ID: <20060731214208.3952.96333.malone@gangotri.ubuntu.com> The given fix did not work for me, but I found that the newest HP BIOS ROM finally fixed all fan problems for my nx8220. Just as a tipp for all the people who still burn their fingers and mainboards because of not correctly working fans... -- After hibernate, cooling on nc6220 does not restart https://launchpad.net/bugs/35455 From danielmewes at onlinehome.de Mon Jul 31 22:26:53 2006 From: danielmewes at onlinehome.de (danielmewes) Date: Mon, 31 Jul 2006 22:26:53 -0000 Subject: [Bug 35455] Re: After hibernate, cooling on nc6220 does not restart References: <20060318120346.12254.9646.malonedeb@gandwana.ubuntu.com> Message-ID: <20060731222653.29717.80701.malone@gandwana.ubuntu.com> Ok, well it seems that I was actually wrong. The update changes the fan's behaviour a lot, so I thought the fans would come up again, but actually they still do not as they should. However, I found out that only those fans do not response after suspend to RAM or disk (I experienced the same problem with both methods), which had been switched on when the system suspends. Thus, the following fix now eventually really seems to work: I added the following script to /etc/acpi/suspend.d: File 85-fan-stop.sh <--> #!/bin/sh modprobe -r thermal for x in /proc/acpi/fan/*; do if [ "`grep on $x/state`" ]; then echo -n 3 > $x/state; fi done <--> This simply stops all fans before the system is suspended. This may make the system run a little bit hot when using suspend to disk, since writing all the pages to disk may take some time and the fans are turned off then. However it works very well for suspend to RAM. I also modified /etc/acpi/resume.d/72-acpi-pain.sh, but did not test yet, if this modification is really necessary. I just commented out the "modprobe -r thermal", "modprobe -r fan" and "modprobe fan" lines as well the "NNGH FAN HATE" part. -- After hibernate, cooling on nc6220 does not restart https://launchpad.net/bugs/35455 From thom at ubuntu.com Mon Jul 31 17:38:17 2006 From: thom at ubuntu.com (Thom May) Date: Mon, 31 Jul 2006 17:38:17 -0000 Subject: [Bug 37452] Re: fusion mpt sas driver does not find a RAID1 disk during installation(Sun Galaxy X4200 and X4100) References: <20060331083135.5415.666.malonedeb@gangotri.ubuntu.com> Message-ID: <20060731173817.3814.88272.malone@gangotri.ubuntu.com> actually, it's probably enough to get c7c82987b4844f555d309ccbd42abe95d46822ff and 816aa907b909177bdf6e6e6b0d00c5e5a6e2be8c from linus' tree. However, the former of those requires an ABI bump. I'm testing a modified tree with these two patches cherry-picked and backported; will post results ASAP. -- fusion mpt sas driver does not find a RAID1 disk during installation(Sun Galaxy X4200 and X4100) https://launchpad.net/bugs/37452 From cruiseoveride at gmail.com Tue Jul 25 13:45:11 2006 From: cruiseoveride at gmail.com (cruiseoveride) Date: Tue, 25 Jul 2006 13:45:11 -0000 Subject: [Bug 29368] Re: gdm locks up system in few seconds after load References: <20060122165604.15826.90432.malonedeb@gandwana.ubuntu.com> Message-ID: <20060725134511.22426.53071.malone@gangotri.ubuntu.com> *** This bug is a duplicate of bug 23445 *** The machine works fine with Fedora Core (tested with version 4). Everything works except sound and Direct Hardware rendering. -- gdm locks up system in few seconds after load https://launchpad.net/bugs/29368 From onkarshinde at rediffmail.com Tue Jul 25 13:48:54 2006 From: onkarshinde at rediffmail.com (Onkar Shinde) Date: Tue, 25 Jul 2006 13:48:54 -0000 Subject: [Bug 53602] Re: apt-get dist-upgrade References: <20060721062850.11213.71427.malonedeb@gandwana.ubuntu.com> Message-ID: <20060725134854.26715.95917.malone@gandwana.ubuntu.com> Can you provide more details? What is the last message you see? -- apt-get dist-upgrade https://launchpad.net/bugs/53602