[Bug 48347] bcm43xx not working on HPzv5404us with

[Tom Haddon]

Public bug reported:

Binary package hint: linux-source-2.6.15

lspci | grep -i wireless

0000:02:02.0 Network controller: Broadcom Corporation BCM4306 802.11b/g
Wireless LAN Controller (rev 03)

iwconfig eth1

eth1      IEEE 802.11b/g  ESSID:off/any  Nickname:"Broadcom 4306"
          Mode:Managed  Frequency=2.484 GHz  Access Point: Invalid
          Bit Rate=11 Mb/s   Tx-Power=19 dBm
          RTS thr:off   Fragment thr:off
          Link Quality:0  Signal level:0  Noise level:0
          Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
          Tx excessive retries:0  Invalid misc:0   Missed beacon:0

Per the wiki I have tried:

sudo iwconfig eth1 rate 11M
sudo iwconfig eth1 ap any

But sudo iwlist eth1 scan always gives me:

eth1      No scan results

I know there are at least 5 wireless networks in range (one of which is
2 feet away and is my own. My wireless card was working fine in Breezy
(with the ndiswrapper module, which I have tried, have filed a bug on,
and is still not resolved).

Thanks, Tom

** Affects: linux-source-2.6.15 (Ubuntu)
       Severity: Normal
       Priority: (none set)
         Status: Unconfirmed

** Summary changed:

- bcm43xx not working on HPzv5404us with 
+ bcm43xx not working on HPzv5404us with BCM4306 (rev 03)

-- 
bcm43xx not working on HPzv5404us with BCM4306 (rev 03)
https://launchpad.net/bugs/48347