[Bug 31185] Re: PCI error messages when booting

[Killy]

In amilo 3438g laptop, pci=noacpi nolapic acpi=off gives additional error:
BIOS bug, local APIC #0 not detected!...
And frecuency scaling stops working.

None of the boot options pointed by Ben work, the devices that seem to
have problems are:

0000:00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev d4) (prog-if 01 [Subtractive decode])
	Flags: bus master, fast devsel, latency 0
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
	I/O behind bridge: 00001000-00001fff
	Memory behind bridge: fa900000-fa9fffff
	Prefetchable memory behind bridge: 0000000050000000-0000000050000000
	Capabilities: [50] #0d [0000]

0000:01:07.0 RAID bus controller: VIA Technologies, Inc. VT6421 IDE RAID Controller (rev 50)
	Subsystem: Fujitsu Siemens Computer GmbH: Unknown device 107c
	Flags: bus master, medium devsel, latency 64, IRQ 169
	I/O ports at 1420 [size=16]
	I/O ports at 1430 [size=16]
	I/O ports at 1440 [size=16]
	I/O ports at 1450 [size=16]
	I/O ports at 1400 [size=32]
	I/O ports at 1000 [size=256]
	Capabilities: [e0] Power Management version 2

Using kernel version 2.6.15-23-386 or 2.6.15-25-386. I believe this is
some kind of kernel bug with these devices on different notebooks, and
possibly there's no way to run RAID configurations on them.

-- 
PCI error messages when booting
https://launchpad.net/bugs/31185