From torrance123 at gmail.com Fri Sep 1 00:34:37 2006 From: torrance123 at gmail.com (Torrance) Date: Fri, 01 Sep 2006 00:34:37 -0000 Subject: [Bug 23445] Re: iMac G5 will freeze after booting up References: <20060113142343.21012.90472.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060901003437.30936.78194.malone@gandwana.ubuntu.com> Yes, I got the sound working too. I have a fully functioning Dapper - sound and fans controlled (except for video that is a bit jerky) - simply by compiling the 2.6.16-rc5 kernel with the g5_defconfig configuration. I've posted instructions about how to get a working Dapper here: http://ubuntuforums.org/showthread.php?p=1447777#post1447777 It'd be good to get feedback on how well this works. Also, rather that using the kernel I've compiled, I'd really like people to try compiling their own kernel and see if we can also get smooth video. I tried compiling from the Ubuntu source (rather than from vanilla) but failed - but that source is probably the best to be experimenting with I think. -- iMac G5 will freeze after booting up https://launchpad.net/bugs/23445 From torrance123 at gmail.com Fri Sep 1 00:36:35 2006 From: torrance123 at gmail.com (Torrance) Date: Fri, 01 Sep 2006 00:36:35 -0000 Subject: [Bug 23445] Re: iMac G5 will freeze after booting up References: <20060113142343.21012.90472.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060901003635.30936.31483.malone@gandwana.ubuntu.com> Oops, that should have read 2.6.18-rc5 kernel - only this kernel has native sound support, although patches can be applied to earlier kernels, as has been done in the 2.6.17 Edgy kernel. -- iMac G5 will freeze after booting up https://launchpad.net/bugs/23445 From mau.fdez at gmail.com Fri Sep 1 06:21:47 2006 From: mau.fdez at gmail.com (Mauricio) Date: Fri, 01 Sep 2006 06:21:47 -0000 Subject: [Bug 43745] Re: Ubuntu corrupts real time clock on some dell laptops References: <20060509053346.20684.57755.malonedeb@gangotri.ubuntu.com> Message-ID: <20060901062147.30936.16530.malone@gandwana.ubuntu.com> Hello, I have a Dell Inspiron 6400, I am using Ubuntu 6.06.1 LTS. I am running my custom own kernel # uname -a Linux yack-yack 2.6.17.6 #1 SMP PREEMPT Wed Jul 26 20:26:02 CST 2006 i686 GNU/Linux $ sudo hwclock -D hwclock from util-linux-2.12r Using /dev/rtc interface to clock. Last drift adjustment done at 1157034115 seconds after 1969 Last calibration done at 1157034115 seconds after 1969 Hardware clock is on local time Assuming hardware clock is kept in local time. Waiting for clock tick... ...got clock tick Time read from Hardware Clock: 2006/09/01 00:03:20 Hw clock time : 2006/09/01 00:03:20 = 1157090600 seconds since 1969 Fri 01 Sep 2006 12:03:20 AM CST -0.210056 seconds $ sudo hwclock -D --directisa hwclock from util-linux-2.12r Using direct I/O instructions to ISA clock. Last drift adjustment done at 1157034115 seconds after 1969 Last calibration done at 1157034115 seconds after 1969 Hardware clock is on local time Assuming hardware clock is kept in local time. Waiting for clock tick... ...got clock tick Time read from Hardware Clock: 2006/09/01 00:04:23 Hw clock time : 2006/09/01 00:04:23 = 1157090663 seconds since 1969 Fri 01 Sep 2006 12:04:23 AM CST -0.856189 seconds --- Today I had to remove the coin battery because I receive "Time-of-day clock stopped", later read this page. I though to remove rtc module from kernel, but I don't think without rtc module solved this time problem. Anyways... Anybody have been tested this solution for this distribution and kernel. Well I added --directisa to /etc/init.d/hwclock.sh, I will tell you if this solved this situation. Regards -- Ubuntu corrupts real time clock on some dell laptops https://launchpad.net/bugs/43745 From mau.fdez at gmail.com Fri Sep 1 06:56:36 2006 From: mau.fdez at gmail.com (Mauricio) Date: Fri, 01 Sep 2006 06:56:36 -0000 Subject: [Bug 43745] Re: Ubuntu corrupts real time clock on some dell laptops References: <20060509053346.20684.57755.malonedeb@gangotri.ubuntu.com> Message-ID: <20060901065636.26465.47529.malone@gangotri.ubuntu.com> Hello again, I forgot, I'm upgraded to bios revision A08 last week. Now I'm running the following script to force the bug happen. while true; do sudo /etc/init.d/hwclock.sh start; sleep 2; sudo /etc/init.d/hwclock.sh stop; sleep 2; done ...And guess, I got it, because in other term ran the following script: ~$ while true; do sudo hwclock --show; sleep 2; done Password: Fri 01 Sep 2006 12:39:07 AM CST -0.475796 seconds select() to /dev/rtc to wait for clock tick timed out select() to /dev/rtc to wait for clock tick timed out Well, had to kill a lot of instances of hwclock that were running. I didn't know that script lauch a new instance each time. My conclusion is, Ubuntu 6.06.1 with Linunx 2.6.17 is affected too, even using --directisa. Anybody has a solution for this. Regards, -- Ubuntu corrupts real time clock on some dell laptops https://launchpad.net/bugs/43745 From torrance123 at gmail.com Fri Sep 1 07:44:40 2006 From: torrance123 at gmail.com (Torrance) Date: Fri, 01 Sep 2006 07:44:40 -0000 Subject: [Bug 34723] Re: iMac G5 Thermal Fan Support References: <20060313091457.30057.2443.malonedeb@gandwana.ubuntu.com> Message-ID: <20060901074440.30981.3934.malone@gandwana.ubuntu.com> I note that Edgy Knot 1 has still not resolved this. The kernel has been compiled with the "windfarm" parts as modules, rather than as part of the kernel. I currently have a kernel with the windfarm parts right inside the kernel and, as a result, I have thermal control. Be nice if this could be fixed since it is so easy to do! -- iMac G5 Thermal Fan Support https://launchpad.net/bugs/34723 From dev at ceglarek.org Fri Sep 1 09:31:19 2006 From: dev at ceglarek.org (Prinz Igor) Date: Fri, 01 Sep 2006 09:31:19 -0000 Subject: [Bug 53754] Re: ata_piix problem with Intel ICH7 chipset References: <20060722182526.11213.79901.malonedeb@gandwana.ubuntu.com> Message-ID: <20060901093119.26396.65774.malone@gangotri.ubuntu.com> Exactly the same here. I have a new laptop: Wortmann Terra MOBILE-BUSINESS M 8400 iC-T2500/15.4" GLARE Is there any hope that it will be fixed soon? -- ata_piix problem with Intel ICH7 chipset https://launchpad.net/bugs/53754 From tburmas at yahoo.com Fri Sep 1 11:55:27 2006 From: tburmas at yahoo.com (linuxted) Date: Fri, 01 Sep 2006 11:55:27 -0000 Subject: [Bug 58339] Re: no sound at all. Even unmuted References: <20060831122211.5486.89963.malonedeb@gandwana.ubuntu.com> Message-ID: <20060901115527.30981.37966.malone@gandwana.ubuntu.com> $ lspci -nv && amixer 0000:00:00.0 0600: 1039:0755 (rev 01) Subsystem: 1019:1891 Flags: bus master, medium devsel, latency 32 Memory at e4000000 (32-bit, non-prefetchable) [size=64M] Capabilities: 0000:00:01.0 0604: 1039:0002 Flags: bus master, 66MHz, medium devsel, latency 99 Bus: primary=00, secondary=01, subordinate=01, sec-latency=32 Memory behind bridge: ec000000-edffffff Prefetchable memory behind bridge: e8000000-ebffffff 0000:00:02.0 0601: 1039:0964 (rev 36) Flags: bus master, medium devsel, latency 0 0000:00:02.5 0101: 1039:5513 (rev 01) (prog-if 80 [Master]) Subsystem: 1019:1891 Flags: bus master, medium devsel, latency 128 I/O ports at I/O ports at I/O ports at I/O ports at I/O ports at 4000 [size=16] 0000:00:02.7 0401: 1039:7012 (rev a0) Subsystem: 1019:1891 Flags: bus master, medium devsel, latency 32, IRQ 217 I/O ports at e000 [size=256] I/O ports at e100 [size=128] Capabilities: 0000:00:03.0 0c03: 1039:7001 (rev 0f) (prog-if 10) Subsystem: 1019:1891 Flags: bus master, medium devsel, latency 32, IRQ 177 Memory at ee024000 (32-bit, non-prefetchable) [size=4K] 0000:00:03.1 0c03: 1039:7001 (rev 0f) (prog-if 10) Subsystem: 1019:1891 Flags: bus master, medium devsel, latency 32, IRQ 185 Memory at ee020000 (32-bit, non-prefetchable) [size=4K] 0000:00:03.2 0c03: 1039:7001 (rev 0f) (prog-if 10) Subsystem: 1019:1891 Flags: bus master, medium devsel, latency 32, IRQ 193 Memory at ee021000 (32-bit, non-prefetchable) [size=4K] 0000:00:03.3 0c03: 1039:7002 (prog-if 20) Subsystem: 1019:1891 Flags: bus master, medium devsel, latency 32, IRQ 201 Memory at ee022000 (32-bit, non-prefetchable) [size=4K] Capabilities: 0000:00:04.0 0200: 1039:0900 (rev 91) Subsystem: 1019:1891 Flags: bus master, medium devsel, latency 32, IRQ 225 I/O ports at e200 [size=256] Memory at ee023000 (32-bit, non-prefetchable) [size=4K] Expansion ROM at 30000000 [disabled] [size=128K] Capabilities: 0000:00:05.0 0101: 1039:0180 (rev 01) (prog-if 85 [Master SecO PriO]) Subsystem: 1019:1891 Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 169 I/O ports at e300 [size=8] I/O ports at e400 [size=4] I/O ports at e500 [size=8] I/O ports at e600 [size=4] I/O ports at e700 [size=16] I/O ports at e800 [size=128] Capabilities: 0000:00:18.0 0600: 1022:1100 Flags: fast devsel Capabilities: 0000:00:18.1 0600: 1022:1101 Flags: fast devsel 0000:00:18.2 0600: 1022:1102 Flags: fast devsel 0000:00:18.3 0600: 1022:1103 Flags: fast devsel 0000:01:00.0 0300: 10de:0181 (rev c1) Flags: bus master, 66MHz, medium devsel, latency 248, IRQ 209 Memory at ec000000 (32-bit, non-prefetchable) [size=16M] Memory at e8000000 (32-bit, prefetchable) [size=64M] Expansion ROM at ed000000 [disabled] [size=128K] Capabilities: Simple mixer control 'Master',0 Capabilities: pvolume pswitch pswitch-joined Playback channels: Front Left - Front Right Limits: Playback 0 - 31 Mono: Front Left: Playback 31 [100%] [on] Front Right: Playback 31 [100%] [on] Simple mixer control 'Master Mono',0 Capabilities: pvolume pvolume-joined pswitch pswitch-joined Playback channels: Mono Limits: Playback 0 - 31 Mono: Playback 30 [97%] [on] Simple mixer control 'PCM',0 Capabilities: pvolume pswitch pswitch-joined Playback channels: Front Left - Front Right Limits: Playback 0 - 31 Mono: Front Left: Playback 25 [81%] [on] Front Right: Playback 25 [81%] [on] Simple mixer control 'Surround',0 Capabilities: pvolume pswitch Playback channels: Front Left - Front Right Limits: Playback 0 - 31 Mono: Front Left: Playback 27 [87%] [on] Front Right: Playback 27 [87%] [on] Simple mixer control 'Surround Jack Mode',0 Capabilities: enum Items: 'Shared' 'Independent' Item0: 'Shared' Simple mixer control 'Center',0 Capabilities: pvolume pvolume-joined pswitch pswitch-joined Playback channels: Mono Limits: Playback 0 - 31 Mono: Playback 31 [100%] [on] Simple mixer control 'LFE',0 Capabilities: pvolume pvolume-joined pswitch pswitch-joined Playback channels: Mono Limits: Playback 0 - 31 Mono: Playback 0 [0%] [off] Simple mixer control 'Line',0 Capabilities: pvolume pswitch pswitch-joined cswitch cswitch-joined cswitch-exclusive Capture exclusive group: 0 Playback channels: Front Left - Front Right Capture channels: Front Left - Front Right Limits: Playback 0 - 31 Front Left: Playback 0 [0%] [off] Capture [off] Front Right: Playback 0 [0%] [off] Capture [off] Simple mixer control 'CD',0 Capabilities: pvolume pswitch pswitch-joined cswitch cswitch-joined cswitch-exclusive Capture exclusive group: 0 Playback channels: Front Left - Front Right Capture channels: Front Left - Front Right Limits: Playback 0 - 31 Front Left: Playback 25 [81%] [on] Capture [off] Front Right: Playback 25 [81%] [on] Capture [off] Simple mixer control 'Mic',0 Capabilities: pvolume pvolume-joined pswitch pswitch-joined cswitch cswitch-joined cswitch-exclusive Capture exclusive group: 0 Playback channels: Mono Capture channels: Front Left - Front Right Limits: Playback 0 - 31 Mono: Playback 0 [0%] [off] Front Left: Capture [on] Front Right: Capture [on] Simple mixer control 'Mic Boost (+20dB)',0 Capabilities: pswitch pswitch-joined Playback channels: Mono Mono: Playback [off] Simple mixer control 'Mic Select',0 Capabilities: enum Items: 'Mic1' 'Mic2' Item0: 'Mic1' Simple mixer control 'Video',0 Capabilities: cswitch cswitch-joined cswitch-exclusive Capture exclusive group: 0 Capture channels: Front Left - Front Right Front Left: Capture [off] Front Right: Capture [off] Simple mixer control 'Phone',0 Capabilities: pvolume pvolume-joined pswitch pswitch-joined cswitch cswitch-joined cswitch-exclusive Capture exclusive group: 0 Playback channels: Mono Capture channels: Front Left - Front Right Limits: Playback 0 - 31 Mono: Playback 0 [0%] [off] Front Left: Capture [off] Front Right: Capture [off] Simple mixer control 'IEC958',0 Capabilities: pswitch pswitch-joined cswitch cswitch-joined enum Items: 'PCM' 'Analog In' 'IEC958 In' Item0: 'PCM' Simple mixer control 'IEC958 Playback AC97-SPSA',0 Capabilities: volume volume-joined Playback channels: Mono Capture channels: Mono Limits: 0 - 3 Mono: 0 [0%] Simple mixer control 'PC Speaker',0 Capabilities: pvolume pvolume-joined pswitch pswitch-joined Playback channels: Mono Limits: Playback 0 - 15 Mono: Playback 0 [0%] [off] Simple mixer control 'Aux',0 Capabilities: pvolume pswitch pswitch-joined cswitch cswitch-joined cswitch-exclusive Capture exclusive group: 0 Playback channels: Front Left - Front Right Capture channels: Front Left - Front Right Limits: Playback 0 - 31 Front Left: Playback 0 [0%] [off] Capture [off] Front Right: Playback 0 [0%] [off] Capture [off] Simple mixer control 'Mono Output Select',0 Capabilities: enum Items: 'Mix' 'Mic' Item0: 'Mix' Simple mixer control 'Capture',0 Capabilities: cvolume cswitch cswitch-joined Capture channels: Front Left - Front Right Limits: Capture 0 - 15 Front Left: Capture 0 [0%] [on] Front Right: Capture 0 [0%] [on] Simple mixer control 'Mix',0 Capabilities: cswitch cswitch-joined cswitch-exclusive Capture exclusive group: 0 Capture channels: Front Left - Front Right Front Left: Capture [off] Front Right: Capture [off] Simple mixer control 'Mix Mono',0 Capabilities: cswitch cswitch-joined cswitch-exclusive Capture exclusive group: 0 Capture channels: Front Left - Front Right Front Left: Capture [off] Front Right: Capture [off] Simple mixer control 'Channel Mode',0 Capabilities: enum Items: '2ch' '4ch' '6ch' Item0: '2ch' Simple mixer control 'Duplicate Front',0 Capabilities: pswitch pswitch-joined Playback channels: Mono Mono: Playback [off] Simple mixer control 'External Amplifier',0 Capabilities: pswitch pswitch-joined Playback channels: Mono Mono: Playback [on] -- no sound at all. Even unmuted https://launchpad.net/bugs/58339 From neil at neilwoolford.co.uk Fri Sep 1 15:06:49 2006 From: neil at neilwoolford.co.uk (Neil Woolford) Date: Fri, 01 Sep 2006 15:06:49 -0000 Subject: [Bug 40850] Re: Mounting my USB drive take long References: <20060422230440.17643.26503.malonedeb@gandwana.ubuntu.com> Message-ID: <20060901150649.30936.17091.malone@gandwana.ubuntu.com> Very similar problem here, automounting a 1GB Kingston DataTraveller U3usb flash drive. (Other generic USB flash drives automount instantly.) Dmesg shows long loops of 'new device' before the device is finally correctly identified and added after a couple of minutes wait. I'll attach dmesg tail, the first 178 or so lines are just looping! Once found and mounted the drive appears to work OK. Ejecting works as normal. -- Mounting my USB drive take long https://launchpad.net/bugs/40850 From joachim.beckers at belgacom.net Fri Sep 1 15:21:00 2006 From: joachim.beckers at belgacom.net (Joachim Beckers) Date: Fri, 01 Sep 2006 15:21:00 -0000 Subject: [Bug 37163] Re: Ipods react badly to checks for EFI partition tables References: <20060329132453.6279.44854.malonedeb@gandwana.ubuntu.com> Message-ID: <20060901152100.30981.5325.malone@gandwana.ubuntu.com> I did a complete reset of my iPod today. First just an upgrade of the firmware (3.1 -> 3.1.1) to make sure all formatting bugs would be gone. Then a full format + fw-upgrade. It still passes all built-in tests, but the problems with the EFI /kernel-thning persist. So anyone who thinks of reformatting his/her iPod to make it work with dapper: think twice. ;-) PS: Waiting for a new linux-image release. I hope this will be fixed in the next one. -- Ipods react badly to checks for EFI partition tables https://launchpad.net/bugs/37163 From ondrej at sury.org Fri Sep 1 16:45:38 2006 From: ondrej at sury.org (=?utf-8?b?T25kxZllaiBTdXLDvQ==?=) Date: Fri, 01 Sep 2006 16:45:38 -0000 Subject: [Bug 26940] Re: Kernel 2.6.15-7-686 won't boot with root on SATA disk References: <20060113145204.21012.90778.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060901164539.30981.87841.malone@gandwana.ubuntu.com> Now it behaves just strange on lastest edgy kernel, sometimes it does boot fast, but more often there is long delay before SATA disks are brought up, see todays boot dmesg snippet: [17179572.852000] SCSI subsystem initialized [17179572.852000] libata version 1.20 loaded. [17179572.852000] ahci 0000:00:1f.2: version 1.2 [17179572.852000] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 18 (level, low) -> IRQ 201 [17179654.724000] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [17179654.724000] ahci 0000:00:1f.2: AHCI 0001.0000 32 slots 4 ports 1.5 Gbps 0x5 impl IDE mode [17179654.724000] ahci 0000:00:1f.2: flags: 64bit ncq pm led pmp slum part [17179654.724000] ata1: SATA max UDMA/133 cmd 0xF8864500 ctl 0x0 bmdma 0x0 irq 201 [17179654.724000] ata2: SATA max UDMA/133 cmd 0xF8864580 ctl 0x0 bmdma 0x0 irq 201 [17179654.724000] ata3: SATA max UDMA/133 cmd 0xF8864600 ctl 0x0 bmdma 0x0 irq 201 [17179654.724000] ata4: SATA max UDMA/133 cmd 0xF8864680 ctl 0x0 bmdma 0x0 irq 201 [17179655.980000] ata1: SATA link up 1.5 Gbps (SStatus 113) ** Changed in: linux-source-2.6.17 (Ubuntu) Status: Fix Released => Confirmed -- Kernel 2.6.15-7-686 won't boot with root on SATA disk https://launchpad.net/bugs/26940 From mjc at sci.utah.edu Fri Sep 1 16:54:33 2006 From: mjc at sci.utah.edu (Martin Cole) Date: Fri, 01 Sep 2006 16:54:33 -0000 Subject: [Bug 6627] Re: lexmark z53 blank pages References: <20060110202826.5372.9972.malonedeb@gangotri.ubuntu.com> Message-ID: <20060901165433.30981.3143.malone@gandwana.ubuntu.com> This is still broken for me. $ uname -a Linux jager 2.6.15-26-amd64-k8 #1 SMP PREEMPT Thu Aug 3 03:11:38 UTC 2006 x86_64 GNU/Linux It looks like the http://www.grad.hr/~ivoks/ubuntu/gutenprint repository doesnt have a version of ijsgutenprint which will install and thus nothing will. $ apt-get upgrade Reading package lists... Done Building dependency tree... Done The following packages have been kept back: foomatic-db-gutenprint 0 upgraded, 0 newly installed, 0 to remove and 1 not upgraded. root at jager ~ 10:51:21 jobs:0 $ apt-get install foomatic-db-gutenprint Reading package lists... Done Building dependency tree... Done Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. Since you only requested a single operation it is extremely likely that the package is simply not installable and a bug report against that package should be filed. The following information may help to resolve the situation: The following packages have unmet dependencies: foomatic-db-gutenprint: Depends: ijsgutenprint (>= 5.0.0~rc2-0ubuntu6.1) but 5.0.0~rc2-0ubuntu6 is to be installed E: Broken packages root at jager ~ 10:51:44 jobs:0 $ apt-get install ijsgutenprint Reading package lists... Done Building dependency tree... Done ijsgutenprint is already the newest version. 0 upgraded, 0 newly installed, 0 to remove and 1 not upgraded. root at jager ~ 10:51:53 jobs:0 -- lexmark z53 blank pages https://launchpad.net/bugs/6627 From mh at nadir.org Fri Sep 1 17:39:47 2006 From: mh at nadir.org (Marc Heckmann) Date: Fri, 01 Sep 2006 17:39:47 -0000 Subject: [Bug 58425] Re: consistent crash on logout, restart or shutdown from X References: <20060901054442.26465.39291.malonedeb@gangotri.ubuntu.com> Message-ID: <20060901173947.30936.576.malone@gandwana.ubuntu.com> I've narrowed the problem down to an oops when rebooting while X is running. This happens even when I reboot from the console by doing CTRL+ALT+F1 first. Unfortunatly, I cannot capture the oops as it zooms by too quickly and I can no longer scroll up once it has crashed (how can I capture the oops?) When booted into "recovery mode" I can reboot fine. I've narrowed the problem down to presence of either the i915.ko or drm.ko kernel modules. This happens both with the 2.6.15-26-amd64-generic and 2.6.15-26-amd64-xeon kernels (this is and EMT_64 system). ** Changed in: xserver-xorg-driver-i810 (Ubuntu) Sourcepackagename: xserver-xorg-driver-i810 => linux-source-2.6.15 -- consistent crash on logout, restart or shutdown from X https://launchpad.net/bugs/58425 From launchpad.net.tormod at xoxy.net Fri Sep 1 17:35:07 2006 From: launchpad.net.tormod at xoxy.net (Tormod Volden) Date: Fri, 01 Sep 2006 17:35:07 -0000 Subject: [Bug 34783] Re: usb-stick is mounted twice References: <20060313163109.17018.9087.malonedeb@gangotri.ubuntu.com> Message-ID: <20060901173507.30981.61455.malone@gandwana.ubuntu.com> *** This bug is a duplicate of bug 19390 *** Effectively, after repartitioning the usb stick the problem was gone. Must have been a strange partition table or something, due to the installation of the RIP-linux. Strange though, that the double partition only showed up if I plugged it in _after_ booting. -- usb-stick is mounted twice https://launchpad.net/bugs/34783 From mh at nadir.org Fri Sep 1 17:41:45 2006 From: mh at nadir.org (Marc Heckmann) Date: Fri, 01 Sep 2006 17:41:45 -0000 Subject: [Bug 58425] consistent crash on logout, restart or shutdown from X References: <20060901054442.26465.39291.malonedeb@gangotri.ubuntu.com> Message-ID: <20060901174145.30981.80824.launchpad@canonical@gandwana.ubuntu.com> Public bug reported: I have an Asus P5LD2-VM Motherboard (Intel 945G chiptset) with a built in Intel Graphics Media Accelerator 950 graphics card (i915 kernel module). It is a fresh install of 6.0.6.1 amd64 with all updates as of Aug. 31 2006. On logout, restart or shutdown, when in X, the system freezes with a black screen (with some video garbage on screen). The only way out is with a hard reset. This happened with the live CD as well. Apparently many others, some with different hardware, have the same problem: http://www.ubuntuforums.org/archive/index.php/t-185163.html Thanks for your help. ** Affects: linux-source-2.6.15 (Ubuntu) Importance: Untriaged Status: Unconfirmed -- consistent crash on logout, restart or shutdown from X https://launchpad.net/bugs/58425 From mh at nadir.org Fri Sep 1 17:54:53 2006 From: mh at nadir.org (Marc Heckmann) Date: Fri, 01 Sep 2006 17:54:53 -0000 Subject: [Bug 58425] Re: consistent OOPS on logout, restart or shutdown with X running References: <20060901054442.26465.39291.malonedeb@gangotri.ubuntu.com> Message-ID: <20060901175453.26396.82076.launchpad@gangotri.ubuntu.com> ** Summary changed: - consistent crash on logout, restart or shutdown from X + consistent OOPS on logout, restart or shutdown with X running -- consistent OOPS on logout, restart or shutdown with X running https://launchpad.net/bugs/58425 From mh at nadir.org Fri Sep 1 18:41:21 2006 From: mh at nadir.org (Marc Heckmann) Date: Fri, 01 Sep 2006 18:41:21 -0000 Subject: [Bug 58425] Re: consistent OOPS on logout, restart or shutdown with X running References: <20060901054442.26465.39291.malonedeb@gangotri.ubuntu.com> Message-ID: <20060901184121.30936.31705.malone@gandwana.ubuntu.com> If I comment out "Load dri" and the DRI section in xorg.conf, I can avoid loading the i915 and drm kernel modules but unfortunatly the system still crashes on shutdown or logout when X is running.. so it seems to be a more general kernel bug. -- consistent OOPS on logout, restart or shutdown with X running https://launchpad.net/bugs/58425 From ivoks at ubuntu.com Fri Sep 1 18:46:01 2006 From: ivoks at ubuntu.com (=?utf-8?q?Ante_Karamati=C4=87?=) Date: Fri, 01 Sep 2006 18:46:01 -0000 Subject: [Bug 6627] Re: [Bug 6627] Re: lexmark z53 blank pages References: <20060110202826.5372.9972.malonedeb@gangotri.ubuntu.com> <20060901165433.30981.3143.malone@gandwana.ubuntu.com> Message-ID: <1157136361.5325.8.camel@i8600.gfr.local> On Pet, 2006-09-01 at 16:54 +0000, Martin Cole wrote: > It looks like the http://www.grad.hr/~ivoks/ubuntu/gutenprint repository This is i386-only repo. You can add: deb-src http://www.grad.hr/~ivoks/ubuntu/gutenprint ./ to sources.list and run: sudo apt-get build-dep gutenprint sudo apt-get source -b gutenprint and install compiled packages. It's not on me to decide, but I think we will have newer gutenprint in Dapper very soon (during next week or two). -- Ante Karamatić PGP: 0xD3BDA225 -- lexmark z53 blank pages https://launchpad.net/bugs/6627 From florian.haas at gmail.com Fri Sep 1 19:11:00 2006 From: florian.haas at gmail.com (Alphager) Date: Fri, 01 Sep 2006 19:11:00 -0000 Subject: [Bug 35474] Re: Dapper - RT61 with wep key doesn't work References: <20060318161032.12254.27781.malonedeb@gandwana.ubuntu.com> Message-ID: <20060901191100.26396.7496.malone@gangotri.ubuntu.com> Installing with the image from http://cdimage.ubuntulinux.org/dvd/20060829/edgy-dvd-i386.iso results in a lockup after the Message "Now booting system". Using the single-user-mode, it freezes after the line [17179573.79600] CPU0: Intel(R) Pentium(R) 4 CPU 2.60GHz stepping 07 -- Dapper - RT61 with wep key doesn't work https://launchpad.net/bugs/35474 From game_ender67 at hotmail.com Fri Sep 1 19:32:19 2006 From: game_ender67 at hotmail.com (Game_Ender) Date: Fri, 01 Sep 2006 19:32:19 -0000 Subject: [Bug 53578] Same issue on Inspiron 600M References: <20060721021454.22448.68218.malonedeb@gangotri.ubuntu.com> Message-ID: <20060901193219.30936.36852.malone@gandwana.ubuntu.com> I have the consumer D600 the 600M and this issue has just started appearing for me to. It appears to be similar to bug #37773 in symptons and it appears to be correlated with wifi usage. Here is my log of the first lockup after a fresh startup: Sep 1 12:05:03 localhost kernel: [17179746.856000] BUG: soft lockup detected on CPU#0! Sep 1 12:05:03 localhost kernel: [17179746.856000] Sep 1 12:05:03 localhost kernel: [17179746.856000] Pid: 0, comm: swapper Sep 1 12:05:03 localhost kernel: [17179746.856000] EIP: 0060:[delay_pmtmr+20/32] CPU: 0 Sep 1 12:05:03 localhost kernel: [17179746.856000] EIP is at delay_pmtmr+0x14/0x20 Sep 1 12:05:03 localhost kernel: [17179746.856000] EFLAGS: 00000287 Tainted: P (2.6.15-26-386) Sep 1 12:05:03 localhost kernel: [17179746.856000] EAX: 198d14a1 EBX: 00001733 ECX: 198d0b4a EDX: 0000002e Sep 1 12:05:03 localhost kernel: [17179746.856000] ESI: f6171260 EDI: c0387f04 EBP: c0387ef8 DS: 007b ES: 007b Sep 1 12:05:03 localhost kernel: [17179746.856000] CR0: 8005003b CR2: 00591000 CR3: 35d59000 CR4: 00000690 Sep 1 12:05:03 localhost kernel: [17179746.856000] [pg0+945526589/1069368320] tg3_readphy+0x5d/0xf0 [tg3] Sep 1 12:05:03 localhost kernel: [17179746.856000] [pg0+945533188/1069368320] tg3_setup_copper_phy+0x184/0x820 [tg3] Sep 1 12:05:03 localhost kernel: [17179746.856000] [pg0+945558368/1069368320] tg3_timer+0x0/0x2e0 [tg3] Sep 1 12:05:03 localhost kernel: [17179746.856000] [pg0+945539751/1069368320] tg3_setup_phy+0x87/0xe0 [tg3] Sep 1 12:05:03 localhost kernel: [17179746.856000] [pg0+945558795/1069368320] tg3_timer+0x1ab/0x2e0 [tg3] Sep 1 12:05:03 localhost kernel: [17179746.856000] [run_timer_softirq+182/464] run_timer_softirq+0xb6/0x1d0 Sep 1 12:05:03 localhost kernel: [17179746.856000] [__do_softirq+79/176] __do_softirq+0x4f/0xb0 Sep 1 12:05:03 localhost kernel: [17179746.856000] [do_softirq+53/64] do_softirq+0x35/0x40 Sep 1 12:05:03 localhost kernel: [17179746.856000] [irq_exit+53/64] irq_exit+0x35/0x40 Sep 1 12:05:03 localhost kernel: [17179746.856000] [do_IRQ+31/48] do_IRQ+0x1f/0x30 Sep 1 12:05:03 localhost kernel: [17179746.856000] [common_interrupt+26/32] common_interrupt+0x1a/0x20 Sep 1 12:05:03 localhost kernel: [17179746.856000] [pg0+944012146/1069368320] acpi_processor_idle+0x155/0x2bc [processor] Sep 1 12:05:03 localhost kernel: [17179746.856000] [cpu_idle+28/96] cpu_idle+0x1c/0x60 Sep 1 12:05:03 localhost kernel: [17179746.856000] [start_kernel+374/464] start_kernel+0x176/0x1d0 Sep 1 12:05:03 localhost kernel: [17179748.232000] ipw2200: Firmware error detected. Restarting. Sep 1 12:05:15 localhost kernel: [17179758.236000] BUG: soft lockup detected on CPU#0! Sep 1 12:05:15 localhost kernel: [17179758.236000] Sep 1 12:05:15 localhost kernel: [17179758.236000] Pid: 0, comm: swapper Sep 1 12:05:15 localhost kernel: [17179758.236000] EIP: 0060:[delay_pmtmr+20/32] CPU: 0 Sep 1 12:05:15 localhost kernel: [17179758.236000] EIP is at delay_pmtmr+0x14/0x20 Sep 1 12:05:15 localhost kernel: [17179758.236000] EFLAGS: 00000297 Tainted: P (2.6.15-26-386) Sep 1 12:05:15 localhost kernel: [17179758.236000] EAX: f7a7c161 EBX: 00003ddc ECX: f7a79006 EDX: 00000031 Sep 1 12:05:15 localhost kernel: [17179758.236000] ESI: f6171260 EDI: c0387f04 EBP: c0387ef8 DS: 007b ES: 007b Sep 1 12:05:15 localhost kernel: [17179758.236000] CR0: 8005003b CR2: b7f34000 CR3: 34b8b000 CR4: 00000690 Sep 1 12:05:15 localhost kernel: [17179758.236000] [pg0+945526589/1069368320] tg3_readphy+0x5d/0xf0 [tg3] Sep 1 12:05:15 localhost kernel: [17179758.236000] [pg0+945533179/1069368320] tg3_setup_copper_phy+0x17b/0x820 [tg3] Sep 1 12:05:15 localhost kernel: [17179758.236000] [pg0+945558368/1069368320] tg3_timer+0x0/0x2e0 [tg3] Sep 1 12:05:15 localhost kernel: [17179758.236000] [pg0+945539751/1069368320] tg3_setup_phy+0x87/0xe0 [tg3] Sep 1 12:05:15 localhost kernel: [17179758.236000] [pg0+945558795/1069368320] tg3_timer+0x1ab/0x2e0 [tg3] Sep 1 12:05:15 localhost kernel: [17179758.236000] [run_timer_softirq+182/464] run_timer_softirq+0xb6/0x1d0 Sep 1 12:05:15 localhost kernel: [17179758.236000] [__do_softirq+79/176] __do_softirq+0x4f/0xb0 Sep 1 12:05:15 localhost kernel: [17179758.236000] [do_softirq+53/64] do_softirq+0x35/0x40 Sep 1 12:05:15 localhost kernel: [17179758.236000] [irq_exit+53/64] irq_exit+0x35/0x40 Sep 1 12:05:15 localhost kernel: [17179758.236000] [do_IRQ+31/48] do_IRQ+0x1f/0x30 Sep 1 12:05:15 localhost kernel: [17179758.236000] [common_interrupt+26/32] common_interrupt+0x1a/0x20 Sep 1 12:05:15 localhost kernel: [17179758.236000] [pg0+944012146/1069368320] acpi_processor_idle+0x155/0x2bc [processor] Sep 1 12:05:15 localhost kernel: [17179758.236000] [cpu_idle+28/96] cpu_idle+0x1c/0x60 Sep 1 12:05:15 localhost kernel: [17179758.236000] [start_kernel+374/464] start_kernel+0x176/0x1d0 Sep 1 12:05:15 localhost kernel: [17179760.396000] ipw2200: Firmware error detected. Restarting. Sep 1 12:05:16 localhost NetworkManager: ^Iwpa_supplicant(4938): 7 65 72 2f 77 70 61 5f 63 74 72 6c 5f 34 34 39 34 2d 31 00 00 00 Sep 1 12:05:16 localhost NetworkManager: ^Iwpa_supplicant(4938): Cancelling scan request Sep 1 12:05:16 localhost NetworkManager: ^Iwpa_supplicant(4938): WPA: clearing own WPA/RSN IE Sep 1 12:05:16 localhost NetworkManager: ^Iwpa_supplicant(4938): Automatic auth_alg selection: 0x1 Sep 1 12:05:16 localhost NetworkManager: ^Iwpa_supplicant(4938): WPA: clearing AP WPA IE Sep 1 12:05:16 localhost NetworkManager: ^Iwpa_supplicant(4938): WPA: clearing AP RSN IE Sep 1 12:05:16 localhost NetworkManager: ^Iwpa_supplicant(4938): WPA: clearing own WPA/RSN IE Sep 1 12:05:16 localhost NetworkManager: ^Iwpa_supplicant(4938): No keys have been configured - skip key clearing Sep 1 12:05:16 localhost NetworkManager: ^Iwpa_supplicant(4938): wpa_driver_wext_set_drop_unencrypted Sep 1 12:05:16 localhost NetworkManager: ^Iwpa_supplicant(4938): State: SCANNING -> ASSOCIATING Sep 1 12:05:16 localhost NetworkManager: ^Iwpa_supplicant(4938): wpa_driver_wext_associate Sep 1 12:05:16 localhost NetworkManager: ^Iwpa_supplicant(4938): Setting authentication timeout: 10 sec 0 usec Sep 1 12:05:16 localhost NetworkManager: ^Iwpa_supplicant(4938): EAPOL: External notification - portControl=ForceAuthorized Sep 1 12:05:16 localhost NetworkManager: ^Iwpa_supplicant(4938): Wireless event: cmd=0x8b06 len=8 Sep 1 12:05:16 localhost NetworkManager: ^Iwpa_supplicant(4938): Wireless event: cmd=0x8b1a len=12 Sep 1 12:05:16 localhost NetworkManager: ^Iwpa_supplicant(4938): Wireless event: cmd=0x8b15 len=20 Sep 1 12:05:16 localhost NetworkManager: ^Iwpa_supplicant(4938): Wireless event: new AP: 00:00:00:00:00:00 Sep 1 12:05:16 localhost NetworkManager: ^Iwpa_supplicant(4938): Added BSSID 00:00:00:00:00:00 into blacklist Sep 1 12:05:16 localhost NetworkManager: ^Iwpa_supplicant(4938): State: ASSOCIATING -> DISCONNECTED Sep 1 12:05:16 localhost NetworkManager: ^Iwpa_supplicant(4938): EAPOL: External notification - portEnabled=0 Sep 1 12:05:16 localhost NetworkManager: ^Iwpa_supplicant(4938): EAPOL: External notification - portValid=0 Sep 1 12:05:16 localhost NetworkManager: ^Iwpa_supplicant(4938): CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys Sep 1 12:05:16 localhost NetworkManager: ^Iwpa_supplicant(4938): CTRL_IFACE monitor send - hexdump(len=42): 2f 76 61 72 2f 72 75 6e 2f 4e 65 74 77 6f 72 6b 4d 61 6e 61 67 65 72 2f 77 70 61 5f 63 74 72 6c 5f 34 34 39 34 2d 31 00 00 00 Sep 1 12:05:16 localhost NetworkManager: ^Iwpa_supplicant(4938): NK, IFLA_IFNAME: Interface 'eth1' added Sep 1 12:05:16 localhost NetworkManager: ^Iwpa_supplicant(4938): Wireless event: cmd=0x8b15 len=20 Sep 1 12:05:16 localhost NetworkManager: ^Iwpa_supplicant(4938): Wireless event: new AP: 00:00:00:00:00:00 Sep 1 12:05:16 localhost NetworkManager: ^Iwpa_supplicant(4938): BSSID 00:00:00:00:00:00 blacklist count incremented to 2 Sep 1 12:05:16 localhost NetworkManager: ^Iwpa_supplicant(4938): State: DISCONNECTED -> DISCONNECTED Sep 1 12:05:16 localhost NetworkManager: ^Iwpa_supplicant(4938): EAPOL: External notification - portEnabled=0 Sep 1 12:05:16 localhost NetworkManager: ^Iwpa_supplicant(4938): EAPOL: External notification - portValid=0 Sep 1 12:05:16 localhost NetworkManager: ^Iwpa_supplicant(4938): CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys Sep 1 12:05:16 localhost NetworkManager: ^Iwpa_supplicant(4938): CTRL_IFACE monitor send - hexdump(len=42): 2f 76 61 72 2f 72 75 6e 2f 4e 65 74 77 6f 72 6b 4d 61 6e 61 67 65 72 2f 77 70 61 5f 63 74 72 6c 5f 34 34 39 34 2d 31 00 00 00 Sep 1 12:05:16 localhost NetworkManager: ^Iwpa_supplicant(4938): Wireless event: cmd=0x8b15 len=20 Sep 1 12:05:16 localhost NetworkManager: ^Iwpa_supplicant(4938): Wireless event: new AP: 00:12:44:b1:e8:b0 Sep 1 12:05:16 localhost NetworkManager: ^Iwpa_supplicant(4938): State: DISCONNECTED -> ASSOCIATED Sep 1 12:05:16 localhost NetworkManager: ^Iwpa_supplicant(4938): Associated to a new BSS: BSSID=00:12:44:b1:e8:b0 Sep 1 12:05:16 localhost NetworkManager: ^Iwpa_supplicant(4938): Associated with 00:12:44:b1:e8:b0 Sep 1 12:05:16 localhost NetworkManager: ^Iwpa_supplicant(4938): CTRL_IFACE monitor send - hexdump(len=42): 2f 76 61 72 2f 72 75 6e 2f 4e 65 74 77 6f 72 6b 4d 61 6e 61 67 65 72 2f 77 70 61 5f 63 74 72 6c 5f 34 34 39 34 2d 31 00 00 00 Sep 1 12:05:16 localhost NetworkManager: ^Iwpa_supplicant(4938): WPA: Association event - clear replay counter Sep 1 12:05:16 localhost NetworkManager: ^Iwpa_supplicant(4938): EAPOL: External notification - portEnabled=0 Sep 1 12:05:16 localhost NetworkManager: ^Iwpa_supplicant(4938): EAPOL: External notification - portValid=0 Sep 1 12:05:16 localhost NetworkManager: ^Iwpa_supplicant(4938): L: External notification - portEnabled=1 Sep 1 12:05:16 localhost NetworkManager: ^Iwpa_supplicant(4938): EAPOL: SUPP_PAE entering state S_FORCE_AUTH Sep 1 12:05:16 localhost NetworkManager: ^Iwpa_supplicant(4938): EAPOL: SUPP_BE entering state IDLE Sep 1 12:05:16 localhost NetworkManager: ^Iwpa_supplicant(4938): Cancelling authentication timeout Sep 1 12:05:16 localhost NetworkManager: ^Iwpa_supplicant(4938): State: ASSOCIATED -> COMPLETED Sep 1 12:05:16 localhost NetworkManager: ^Iwpa_supplicant(4938): CTRL-EVENT-CONNECTED - Connection to 00:12:44:b1:e8:b0 completed (auth) Sep 1 12:05:16 localhost NetworkManager: ^Iwpa_supplicant(4938): CTRL_IFACE monitor send - hexdump(len=42): 2f 76 61 72 2f 72 75 6e 2f 4e 65 74 77 6f 72 6b 4d 61 6e 61 67 65 72 2f 77 70 61 5f 63 74 72 6c 5f 34 34 39 34 2d 31 00 00 00 Sep 1 12:05:16 localhost NetworkManager: ^Iwpa_supplicant(4938): RTM_NEWLINK, IFLA_IFNAME: Interface 'eth1' added Sep 1 12:05:16 localhost NetworkManager: ^Iwpa_supplicant(4938): RTM_NEWLINK, IFLA_IFNAME: Interface 'eth1' added Sep 1 12:05:16 localhost NetworkManager: ^Iwpa_supplicant(4938): Wireless event: cmd=0x8b15 len=20 Sep 1 12:05:16 localhost NetworkManager: ^Iwpa_supplicant(4938): Wireless event: new AP: 00:12:44:b1:e8:b0 Sep 1 12:05:16 localhost NetworkManager: ^Iwpa_supplicant(4938): State: COMPLETED -> ASSOCIATED Sep 1 12:05:16 localhost NetworkManager: ^Iwpa_supplicant(4938): Associated with 00:12:44:b1:e8:b0 Sep 1 12:05:16 localhost NetworkManager: ^Iwpa_supplicant(4938): CTRL_IFACE monitor send - hexdump(len=42): 2f 76 61 72 2f 72 75 6e 2f 4e 65 74 77 6f 72 6b 4d 61 6e 61 67 65 72 2f 77 70 61 5f 63 74 72 6c 5f 34 34 39 34 2d 31 00 00 00 Sep 1 12:05:16 localhost NetworkManager: ^Iwpa_supplicant(4938): WPA: Association event - clear replay counter Sep 1 12:05:16 localhost NetworkManager: ^Iwpa_supplicant(4938): EAPOL: External notification - portEnabled=0 Sep 1 12:05:16 localhost NetworkManager: ^Iwpa_supplicant(4938): EAPOL: SUPP_PAE entering state DISCONNECTED Sep 1 12:05:16 localhost NetworkManager: ^Iwpa_supplicant(4938): EAPOL: SUPP_BE entering state INITIALIZE Sep 1 12:05:16 localhost NetworkManager: ^Iwpa_supplicant(4938): al notification - portValid=0 Sep 1 12:05:16 localhost NetworkManager: ^Iwpa_supplicant(4938): EAPOL: External notification - portEnabled=1 Sep 1 12:05:16 localhost NetworkManager: ^Iwpa_supplicant(4938): EAPOL: SUPP_PAE entering state S_FORCE_AUTH Sep 1 12:05:16 localhost NetworkManager: ^Iwpa_supplicant(4938): EAPOL: SUPP_BE entering state IDLE Sep 1 12:05:16 localhost NetworkManager: ^Iwpa_supplicant(4938): Cancelling authentication timeout Sep 1 12:05:16 localhost NetworkManager: ^Iwpa_supplicant(4938): State: ASSOCIATED -> COMPLETED Sep 1 12:05:16 localhost NetworkManager: ^Iwpa_supplicant(4938): CTRL-EVENT-CONNECTED - Connection to 00:12:44:b1:e8:b0 completed (reauth) Sep 1 12:05:16 localhost NetworkManager: ^Iwpa_supplicant(4938): CTRL_IFACE monitor send - hexdump(len=42): 2f 76 61 72 2f 72 75 6e 2f 4e 65 74 77 6f 72 6b 4d 61 6e 61 67 65 72 2f 77 70 61 5f 63 74 72 6c 5f 34 34 39 34 2d 31 00 00 00 Sep 1 12:05:16 localhost NetworkManager: ^Iwpa_supplicant(4938): RTM_NEWLINK, IFLA_IFNAME: Interface 'eth1' added Sep 1 12:05:16 localhost NetworkManager: ^Iwpa_supplicant(4938): Wireless event: cmd=0x8b15 len=20 Sep 1 12:05:16 localhost NetworkManager: ^Iwpa_supplicant(4938): Wireless event: new AP: 00:12:44:b1:e8:b0 Sep 1 12:05:16 localhost NetworkManager: ^Iwpa_supplicant(4938): State: COMPLETED -> ASSOCIATED Sep 1 12:05:16 localhost NetworkManager: ^Iwpa_supplicant(4938): Associated with 00:12:44:b1:e8:b0 Sep 1 12:05:16 localhost NetworkManager: ^Iwpa_supplicant(4938): CTRL_IFACE monitor send - hexdump(len=42): 2f 76 61 72 2f 72 75 6e 2f 4e 65 74 77 6f 72 6b 4d 61 6e 61 67 65 72 2f 77 70 61 5f 63 74 72 6c 5f 34 34 39 34 2d 31 00 00 00 Sep 1 12:05:16 localhost NetworkManager: ^Iwpa_supplicant(4938): WPA: Association event - clear replay counter Sep 1 12:05:16 localhost NetworkManager: ^Iwpa_supplicant(4938): EAPOL: External notification - portEnabled=0 Sep 1 12:05:16 localhost NetworkManager: ^Iwpa_supplicant(4938): EAPOL: SUPP_PAE entering state DISCONNECTED Sep 1 12:05:16 localhost NetworkManager: ^Iwpa_supplicant(4938): EAPOL: SUPP_BE entering state INITIALIZE Sep 1 12:05:28 localhost kernel: [17179770.400000] BUG: soft lockup detected on CPU#0! -- recent dapper kernels causing lockups on Dell Latitude D600 https://launchpad.net/bugs/53578 From burner at suppressingfire.org Fri Sep 1 20:21:55 2006 From: burner at suppressingfire.org (Michael R. Head) Date: Fri, 01 Sep 2006 20:21:55 -0000 Subject: [Bug 43961] Re: Power down after shutdown does not work... References: <20060510072310.21520.62027.malonedeb@gandwana.ubuntu.com> Message-ID: <20060901202155.30936.36557.malone@gandwana.ubuntu.com> I just tested with an edgy Knot-2 Live CD, and it was unable to power off after plugging and unplugging the power cable. ** Changed in: linux-source-2.6.17 (Ubuntu) Status: Needs Info => Confirmed -- Power down after shutdown does not work... https://launchpad.net/bugs/43961 From burner at suppressingfire.org Fri Sep 1 20:20:22 2006 From: burner at suppressingfire.org (Michael R. Head) Date: Fri, 01 Sep 2006 20:20:22 -0000 Subject: [Bug 43194] Re: [dapper regression] orinoco_cs PCMCIA wireless card no longer hotplugs with Thinkpad T22 References: <20060506081353.20638.82317.malonedeb@gangotri.ubuntu.com> Message-ID: <20060901202022.26465.7023.malone@gangotri.ubuntu.com> As far as I can tell, this is no longer a problem with edgy's kernel. ** Also affects: linux-source-2.6.17 (Ubuntu) Importance: Untriaged Status: Unconfirmed ** Changed in: linux-source-2.6.17 (Ubuntu) Status: Unconfirmed => Fix Released ** Tags added: dapper -- [dapper regression] orinoco_cs PCMCIA wireless card no longer hotplugs with Thinkpad T22 https://launchpad.net/bugs/43194 From thenewme91 at gmail.com Fri Sep 1 22:06:30 2006 From: thenewme91 at gmail.com (Mike C) Date: Fri, 01 Sep 2006 22:06:30 -0000 Subject: [Bug 37876] Re: Kernel does not read DVDs, no automount References: <20060403143410.25863.56627.malonedeb@gangotri.ubuntu.com> Message-ID: <20060901220630.26465.81071.malone@gangotri.ubuntu.com> I'm going to attempt to summarize the bug's info to date. Based on above comments in the thread: This bug is believed a REGRESSION between Ubuntu 6.06 and the previous release 5.10. The problem is that some written DVDs (but not all) can be read under other OSes, and in fact, Breezy (5.10), but not in Ubuntu Dapper (6.06). Some users have reported success with Kubuntu Dapper (6.06) as well. It is confirmed there is a problem that is preventing certain users from reading certain DVD discs on certain drives. What the problem is, and what is causing it, is unknown or unconfirmed. AFAIK, Reading DVDs isn't performed in user-space, it is done in the kernel. Therefore, a FIRST STEP to troubleshooting would to see if running under a *user-built kernel* built with kernel-package configured with the required DVD-reading options (notably, device support, either IDE, SCSI, or whatever your drive needs, as well as ISO9660 and UDF file system support) works. If it does, then the kernel-building system and the kernel-builders' policies need to be revised. Maybe the archives for the mailing list for the kernel team (if any) or the wiki or whatever need to be consulted to see if they knew and if there was reason. It might also help to see if this regression appeared in the upstream vanilla Linux kernel; although I assume if the config was done right, it should work, since I can burn from my custom 2.6.17 kernel on my Debian box (the other one). This would mainly be of note if upstream vanilla (or someone else) dropped drivers for certain disc drives. Additional info that may help: A user with access to similar (preferably identical) or dual/triple/quad-boot system with Windows (presumably/preferably XP; other versions' support are reported flaky, and Vista is in beta), Ubuntu Dapper (6.06), Breezy (5.10), Kubuntu Dapper (6.06), or a combination of the four, one of which is Ubuntu Dapper, to burn DVDs under Windows, Breezy, and Dapper, and see which ones are readable under which systems. Debian unstable or another system may also be a useful benchmark if available. (The above reports seem inconsistent, so a unified report on all the same hardware would show whether or not this is a software problem. Also, if it shows Dapper can read all DVDs except for those produced by Dapper (and maybe Debian Unstable), then it means there is a problem in the burning software -- my first hunch would to be to look for bugs/regressions or incompatabilities in growisofs/dvd+rw-tools, maybe in OPC or similar. The changelog for said program may help.) Further info that may help: A diff between the configs of the different kernel images for Dapper and Breezy. Assuming the report that the bug doesn't affect Kubuntu Dapper is true, a diff of the configs for the kernel image in Kubuntu versus Ubuntu would also help. (If, for example, by chance, the Dapper kernel has UDF file system support as modular (or omitted) where Breezy/Kubuntu didn't/doesn't, loading (via modprobe or similar) the module, if one was built, might help.) -- Kernel does not read DVDs, no automount https://launchpad.net/bugs/37876 From trumbitta at gmail.com Fri Sep 1 23:38:29 2006 From: trumbitta at gmail.com (Wiz of Id) Date: Fri, 01 Sep 2006 23:38:29 -0000 Subject: [Bug 58292] Re: SiS 900 networking broken References: <20060831024123.26465.98879.malonedeb@gangotri.ubuntu.com> Message-ID: <20060901233829.26465.76774.launchpad@gangotri.ubuntu.com> ** Description changed: Ubuntu 5.10, Kernel 2.6.10, SiS 900 NIC works fine. Ubuntu 6.06, Kernel 2.6.15, SiS 900 NIC can't get a single packet from the DHCP server. The wireless usb dongle can. Ubuntu 6.06, Kernel 2.6.15 recompiled leaving out of my system the unwanted integrated iptables, SiS 900 NIC works fine. But I have to recompile the kernel (and several third-party modules) every time I need to update it. Obviously, the settings of iptable are something similar to "please enter, you are all welcome". But I still need to recompile. + + ------------------------ + EDIT 2006/09/02 + + The problem seems to be somehow related to X. + Booting the system in recovery mode with the stock kernel, doesn't affect the networking. + However, if I then launch 'startx', the networking is broken again. + + That is: + + Stock kernel + X = BAD + Stock kernel - X = GOOD + Recompiled kernel removing integrated iptables = GOOD + + Hardware: + Asus A2D laptop, Ati Mobility Radeon 9600 (fglrx ubuntu 6.06 drivers), Sis 900 NIC -- SiS 900 networking broken https://launchpad.net/bugs/58292 From ryanakca at gmail.com Sat Sep 2 00:00:28 2006 From: ryanakca at gmail.com (Ryan Kavanagh) Date: Sat, 02 Sep 2006 00:00:28 -0000 Subject: [Bug 14887] Re: Kernel 2.6.10 APM and usb_his IRQ Conflicts Thinkpad 600 References: <20060113133913.21012.49992.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060902000028.26396.37699.malone@gangotri.ubuntu.com> Your bug lacks information we would need to investigate further. We are now going to close the bug - please reopen if you have more information at hand. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Needs Info => Rejected -- Kernel 2.6.10 APM and usb_his IRQ Conflicts Thinkpad 600 https://launchpad.net/bugs/14887 From cepe at gmbm.net Sat Sep 2 02:52:03 2006 From: cepe at gmbm.net (=?utf-8?q?Jos=C3=A9_M=2E_L=C3=B3pez-Cepero?=) Date: Sat, 02 Sep 2006 02:52:03 -0000 Subject: [Bug 53754] Re: ata_piix problem with Intel ICH7 chipset References: <20060722182526.11213.79901.malonedeb@gandwana.ubuntu.com> Message-ID: <20060902025203.30936.63555.malone@gandwana.ubuntu.com> Sorry for not answering earlier - I have been without internet connection. I have found what seems to be a workaround. Don't ask me how it is supposed to work, though :D Apparently, when I boot up using the Edgy CD I downloaded and choosing "Boot from first hard disk" from the menu, the CD gets put in the "mrw address space DMA" (whatever that is) and the system may go on happily for days (very rarely I get a hangup, but it would be like one in a week or so. I don't know why that happens (note that the only thing from the CD that gets executed is the bootloader), but it seems to be reliable... Cheers -- ata_piix problem with Intel ICH7 chipset https://launchpad.net/bugs/53754 From mh at nadir.org Sat Sep 2 04:22:06 2006 From: mh at nadir.org (Marc Heckmann) Date: Sat, 02 Sep 2006 04:22:06 -0000 Subject: [Bug 58425] Re: consistent OOPS on logout, restart or shutdown with X running References: <20060901054442.26465.39291.malonedeb@gangotri.ubuntu.com> Message-ID: <20060902042206.26396.6376.malone@gangotri.ubuntu.com> *** This bug is a duplicate of bug 34697 *** Looks like this is a duplicate of: https://launchpad.net/distros/ubuntu/+source/linux- source-2.6.15/+bug/34697 Sorry about the report. I thought I had searched the existing bugs thoroughly before posting... I'll try the workaround mentioned as soon as I get chance to. Even with the workaround this should not be happening. It's a real showstopper for newbies . ** This bug has been marked a duplicate of bug 34697 kernel panic when X server terminates -- consistent OOPS on logout, restart or shutdown with X running https://launchpad.net/bugs/58425 From mh at nadir.org Sat Sep 2 04:22:31 2006 From: mh at nadir.org (Marc Heckmann) Date: Sat, 02 Sep 2006 04:22:31 -0000 Subject: [Bug 34697] Re: kernel panic when X server terminates References: <20060313051958.30057.12158.malonedeb@gandwana.ubuntu.com> Message-ID: <20060902042231.26465.41119.launchpad@gangotri.ubuntu.com> ** Bug 58425 has been marked a duplicate of this bug -- kernel panic when X server terminates https://launchpad.net/bugs/34697 From gothink3 at gothink.biz Sat Sep 2 05:50:05 2006 From: gothink3 at gothink.biz (gothink3) Date: Sat, 02 Sep 2006 05:50:05 -0000 Subject: [Bug 23445] Re: iMac G5 will freeze after booting up References: <20060113142343.21012.90472.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060902055005.30981.16397.malone@gandwana.ubuntu.com> I'm sucking down the lastes edgy. I've been beating my head against the wall for hours with the red screen of death. Much thanks for all the work you guys did on this. Hopefully us g5imackers' will be up and running soon. Thanks again. -- iMac G5 will freeze after booting up https://launchpad.net/bugs/23445 From charlie.dillon at gmail.com Sat Sep 2 06:47:17 2006 From: charlie.dillon at gmail.com (cholly) Date: Sat, 02 Sep 2006 06:47:17 -0000 Subject: [Bug 6032] Re: sound doesn't work (via 8233/ac97) References: <20051222003637.24593.90397.malonedeb@gangotri.ubuntu.com> Message-ID: <20060902064717.30936.32038.malone@gandwana.ubuntu.com> I have had this problem with my Averatec 3715-EH1 Laptop. Using both Ubuntu 5.10 and only recently in 6.06 (LTS). I don't use hibernate or suspend (largely because if this bug) and seldom 'reboot.' It is usually just a shutdown/restart. My initial 5.10 install was dual-boot with windows, and a reboot into, and log out of Windows would fix it with an audible tick or pop. Installed 6.06(LTS) from the CD replacing the 5.10 install (due to a failed windows upgrade mucking up the MBR), and had it set up to dual- boot for a while too, but did not experience the problem so I wiped the Windows install and installed 6.06 (LTS) as the only OS and it worked well for near 2 weeks and recently the problem has resurfaced. I have checked the alsamixer settings and recently installed the latest kernel package for the k7 in an attempt to fix it. My next steps were going to be roll a custom kernel to see if perhaps there were some driver conflicts, OR reinstall via the same CD and do the upgrades/updates and see what might possibly be breaking it there. I think it is important to note that I had near a month of use without problem from the 6.06 (LTS) install. It only returned early this week (near 8/270/06). Also that again I don't use hbernate/suspend. Lastly I'm not convinced it might be the power management somehow. I really think it quits working while the machine is still 'on' sometimes. -- sound doesn't work (via 8233/ac97) https://launchpad.net/bugs/6032 From teomatto at tin.it Sat Sep 2 07:32:29 2006 From: teomatto at tin.it (teomatto) Date: Sat, 02 Sep 2006 07:32:29 -0000 Subject: [Bug 53754] Re: ata_piix problem with Intel ICH7 chipset References: <20060722182526.11213.79901.malonedeb@gandwana.ubuntu.com> Message-ID: <20060902073229.26465.20824.malone@gangotri.ubuntu.com> hi all, i HAD the same problem with kernel 2.6.15-26-386 and my maxdata centrino duo laptop (with ipw3945). I solved by upgrading kernel to 2.6.15-26-686 (apt-get install linux-i686) hope this help teo -- ata_piix problem with Intel ICH7 chipset https://launchpad.net/bugs/53754 From ballagas at gmail.com Sat Sep 2 09:40:09 2006 From: ballagas at gmail.com (Tico) Date: Sat, 02 Sep 2006 09:40:09 -0000 Subject: [Bug 58550] Installation hangs with not enough memory - need error message References: <20060902094009.26465.7849.malonedeb@gangotri.ubuntu.com> Message-ID: <20060902094009.26465.7849.malonedeb@gangotri.ubuntu.com> Public bug reported: Binary package hint: linux-source-2.6.15 I tried installing Ubuntu 6.06 on a PIII 850MHz, with 128 MB RAM. When I tried the installation, everything appeared to be working fine until the Live CD tried to load the Window Manager or Nautilus, and then it would just hang. It took me a while to realize that the system didn't meet the minimum requirement 192 MB of RAM. It would have saved me a lot of time if an error message popped up when the system ran out of memory, or even better, if the system checked the available memory at the beginning of the boot process to inform me when my system doesn't meet the minimum requirements. ** Affects: linux-source-2.6.15 (Ubuntu) Importance: Untriaged Status: Unconfirmed -- Installation hangs with not enough memory - need error message https://launchpad.net/bugs/58550 From dev at ceglarek.org Sat Sep 2 10:11:06 2006 From: dev at ceglarek.org (Prinz Igor) Date: Sat, 02 Sep 2006 10:11:06 -0000 Subject: [Bug 53754] Re: ata_piix problem with Intel ICH7 chipset References: <20060722182526.11213.79901.malonedeb@gandwana.ubuntu.com> Message-ID: <20060902101106.30981.8990.malone@gandwana.ubuntu.com> hi. i have just installed edgy knot2. my system does not freeze anymore but the message are all the same (appear just once(!) in dmesg): ata2 is slow to respond, please be patient ata2 failed to respond (30 secs) ata2: command 0xa0 timeout, stat 0xd0 host_stat 0x20 ata2: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00 sr0: CDROM (ioctl) error, command: <6>Read TOC/PMA/ATIP 43 00 00 00 00 00 00 00 0c 40 sr: Current [descriptor]: sense key: Aborted Command Additional sense: Scsi parity error What is the difference between Dapper and Edgy? What makes it work in Edgy? -- ata_piix problem with Intel ICH7 chipset https://launchpad.net/bugs/53754 From stephane.tranchemer at devinci.fr Sat Sep 2 10:46:01 2006 From: stephane.tranchemer at devinci.fr (Corsaire01) Date: Sat, 02 Sep 2006 10:46:01 -0000 Subject: [Bug 43961] Re: Power down after shutdown does not work... References: <20060510072310.21520.62027.malonedeb@gandwana.ubuntu.com> Message-ID: <20060902104601.30981.36800.malone@gandwana.ubuntu.com> >I just tested with an edgy Knot-2 Live CD, and it was unable to power off after plugging and unplugging the power cable. you mean "since it was not able to power-off I had to unplug the power cable" , right ? btw, I changed my motherboard recently from a Tyan Tiger K8W to a Tiger K8WE. Now the power-off works. For information this makes me go from an AMD chipset to a NVidia nForce4, see also Tyan's website to get more precise description of hardware present on the mobo, may be useful. -- Power down after shutdown does not work... https://launchpad.net/bugs/43961 From sebastian_kapfer at gmx.net Sat Sep 2 11:30:22 2006 From: sebastian_kapfer at gmx.net (Sebastian Kapfer) Date: Sat, 02 Sep 2006 11:30:22 -0000 Subject: [Bug 50275] Re: XFS corruption post-suspend-to-RAM in 2.6.15-25 References: <20060618230713.13137.72847.malonedeb@gandwana.ubuntu.com> Message-ID: <20060902113022.30936.22717.malone@gandwana.ubuntu.com> Just tried 10 suspend-resume cycles with Dapper, and it didn't break. Now I'm puzzled. The XFS still breaks sometimes, but it's not directly related to suspending. *scratches head* Maybe it's laptop-mode. I'll try that next, and a Edgy disc after that. -- XFS corruption post-suspend-to-RAM in 2.6.15-25 https://launchpad.net/bugs/50275 From chantry.xavier at gmail.com Sat Sep 2 12:14:37 2006 From: chantry.xavier at gmail.com (Xavier) Date: Sat, 02 Sep 2006 12:14:37 -0000 Subject: [Bug 58570] kernel_image target fails with kernel 2.6.18-rc References: <20060902121437.30936.48954.malonedeb@gandwana.ubuntu.com> Message-ID: <20060902121437.30936.48954.malonedeb@gandwana.ubuntu.com> Public bug reported: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=377267 should be fixed in 10.050 ** Affects: kernel-package (Ubuntu) Importance: Untriaged Status: Unconfirmed -- kernel_image target fails with kernel 2.6.18-rc https://launchpad.net/bugs/58570 From Tam at SiuLung.com Sat Sep 2 12:54:15 2006 From: Tam at SiuLung.com (Alan Tam) Date: Sat, 02 Sep 2006 12:54:15 -0000 Subject: [Bug 48214] Re: Please driver for Planex USB wireless References: <20060603134059.2141.9914.malonedeb@gangotri.ubuntu.com> Message-ID: <20060902125415.30981.64706.malone@gandwana.ubuntu.com> Hi, zd1211* is an open chipset that comes with official GPL'd driver and open spec from the manufacturer. It would be a shame if Ubuntu doesn't support it out of box. -- Please driver for Planex USB wireless https://launchpad.net/bugs/48214 From mairas at iki.fi Sat Sep 2 15:07:45 2006 From: mairas at iki.fi (Matti Airas) Date: Sat, 02 Sep 2006 15:07:45 -0000 Subject: [Bug 58143] Re: Kernel does not boot without noapic or maxcpus=1 References: <20060829200900.5486.70328.malonedeb@gandwana.ubuntu.com> Message-ID: <20060902150745.30981.37921.malone@gandwana.ubuntu.com> The problem was fixed by flashing the motherboard BIOS to the newest version. So basically, this bug can be closed now. Sorry for any inconvenience. ** Summary changed: - Kernel does not boot without noacpi or maxcpus=1 + Kernel does not boot without noapic or maxcpus=1 -- Kernel does not boot without noapic or maxcpus=1 https://launchpad.net/bugs/58143 From burner at suppressingfire.org Sat Sep 2 16:08:20 2006 From: burner at suppressingfire.org (Michael R. Head) Date: Sat, 02 Sep 2006 16:08:20 -0000 Subject: [Bug 43961] Re: Power down after shutdown does not work... References: <20060510072310.21520.62027.malonedeb@gandwana.ubuntu.com> Message-ID: <20060902160820.26396.99230.malone@gangotri.ubuntu.com> > you mean "since it was not able to power-off I had to unplug the power cable" , right ? Actually, I just hold the power button for 4-5 seconds. -- Power down after shutdown does not work... https://launchpad.net/bugs/43961 From james.pickering at virgin.net Sat Sep 2 17:10:05 2006 From: james.pickering at virgin.net (James_pic) Date: Sat, 02 Sep 2006 17:10:05 -0000 Subject: [Bug 35474] Re: Dapper - RT61 with wep key doesn't work References: <20060318161032.12254.27781.malonedeb@gandwana.ubuntu.com> Message-ID: <20060902171006.26465.85956.malone@gangotri.ubuntu.com> I may have found a solution for this problem in dapper. I was having the same problem, so I downloaded the newest ralink drivers (1.0.4.0). As well as the newest kernel module, they include a driver for wpa supplicant. Using the newer module, as well as the ralink wpa supplicant driver, I was able to use WPA. I've attached an archive with the compiled module, an updated wpasupplicant package with the new driver, as well as the modified wpa supplicant source, and instructions. I'm not a programmer, so it's kinda scrappy - most of you could probably do the same much more tidily - but it seems to work. -- Dapper - RT61 with wep key doesn't work https://launchpad.net/bugs/35474 From ivoks at ubuntu.com Sat Sep 2 17:27:45 2006 From: ivoks at ubuntu.com (=?utf-8?q?Ante_Karamati=C4=87?=) Date: Sat, 02 Sep 2006 17:27:45 -0000 Subject: [Bug 58189] Re: Kernel doesn't support HPT RocketRAID 1520 References: <20060830111551.17097.39726.malonedeb@gangotri.ubuntu.com> Message-ID: <20060902172745.30936.23547.malone@gandwana.ubuntu.com> Khm... "Source" contains: raid.o raid-x86_64.o so, I guess this is a no-go? -- Kernel doesn't support HPT RocketRAID 1520 https://launchpad.net/bugs/58189 From oozypal at gmail.com Sat Sep 2 19:13:11 2006 From: oozypal at gmail.com (OOzy) Date: Sat, 02 Sep 2006 19:13:11 -0000 Subject: [Bug 43961] Re: Power down after shutdown does not work... References: <20060510072310.21520.62027.malonedeb@gandwana.ubuntu.com> Message-ID: <20060902191312.30981.26316.malone@gandwana.ubuntu.com> Hello Hans Bostrom, The bug appear in my desktop computer in both 686 and 386 kernels. I posted my system output above long time ago. Thank you. -- Power down after shutdown does not work... https://launchpad.net/bugs/43961 From ghackmann at gmail.com Sat Sep 2 19:24:50 2006 From: ghackmann at gmail.com (Greg Hackmann) Date: Sat, 02 Sep 2006 19:24:50 -0000 Subject: [Bug 55967] Re: Crash while booting kernel when Legacy USB is enabled in BIOS References: <20060811031955.20172.8184.malonedeb@gandwana.ubuntu.com> Message-ID: <20060902192450.26465.93498.malone@gangotri.ubuntu.com> It turns out that adding usb-handoff to the boot options corrects the problem. SuSE apparently patches the kernel to make this option the default. -- Crash while booting kernel when Legacy USB is enabled in BIOS https://launchpad.net/bugs/55967 From neil at neilwoolford.co.uk Sat Sep 2 19:23:59 2006 From: neil at neilwoolford.co.uk (Neil Woolford) Date: Sat, 02 Sep 2006 19:23:59 -0000 Subject: [Bug 40850] Re: Mounting my USB drive take long References: <20060422230440.17643.26503.malonedeb@gandwana.ubuntu.com> Message-ID: <20060902192359.26465.530.malone@gangotri.ubuntu.com> I've now tried out the DataTraveler on two other machines running Ubuntu, one 5.10 and another 6.06. The problem occurs on both machines, though the one running 5.10 seems to be rather quicker to recognise the device as automountable. Typically it takes 45 seconds to a minute or two to get round to mounting it. 6.06 can take long enough to go to town, have three coffees while reading the paper, do some shopping.......... A further quirk is that on the system running 5.10, if I first insert the Kingston DataTraveler I normally get the 'looping' behaviour. If I insert another, generic, USB flash drive, not only does that mount normally but the Kingston device nearly always mounts *immediately* afterwards. This does not seem to work on the 6.06 system... However, the problem may be to do with the quirks of the Kingston DataTraveler with the U3 feature that shows up as an external CD drive. This is preloaded with applications (for Windows) to allow you to (for example) take your own copy of Firefox with you from machine to machine. Is there perhaps a problem with a single physical device that announces itself as two logical ones? Are we looking at hardware or bios quirks here? I do know that the device behaves fine with my Windows 2000 workstation. I'm considering removing the U3 feature from the drive and reformatting it as a standard VFAT device to see if this helps. (However, this is a onetime operation, once the U3 pseudo CD has been removed it is not user restorable.) Suggestions please! -- Mounting my USB drive take long https://launchpad.net/bugs/40850 From stefan-r-ubz at s5r6.in-berlin.de Sat Sep 2 20:18:24 2006 From: stefan-r-ubz at s5r6.in-berlin.de (Stefan Richter) Date: Sat, 02 Sep 2006 20:18:24 -0000 Subject: [Bug 28647] Re: sbp2 hot plug causes hard crashes References: <20060116010423.6087.7224.malonedeb@gangotri.ubuntu.com> Message-ID: <20060902201824.26396.94634.malone@gangotri.ubuntu.com> This may have been fixed upstream, e.g. in Linux 2.6.16.2. Could you try the newest kernel that you are confident you can get installed without trouble? -- sbp2 hot plug causes hard crashes https://launchpad.net/bugs/28647 From stefan-r-ubz at s5r6.in-berlin.de Sat Sep 2 20:28:07 2006 From: stefan-r-ubz at s5r6.in-berlin.de (Stefan Richter) Date: Sat, 02 Sep 2006 20:28:07 -0000 Subject: [Bug 28691] Re: amd64 kernel locks on firewire ipod unplugging References: <20060116152545.30333.48749.malonedeb@gangotri.ubuntu.com> Message-ID: <20060902202807.30981.78638.malone@gandwana.ubuntu.com> This was certainly fixed in a later kernel version. There were a number of related fixes getting in into almost each subsequent upstream release, so it's hard to tell which one you would need. -- amd64 kernel locks on firewire ipod unplugging https://launchpad.net/bugs/28691 From stefan-r-ubz at s5r6.in-berlin.de Sat Sep 2 20:49:11 2006 From: stefan-r-ubz at s5r6.in-berlin.de (Stefan Richter) Date: Sat, 02 Sep 2006 20:49:11 -0000 Subject: [Bug 36619] Re: usb-mass storage disk isn't recognized the right way References: <20060325183618.6253.2445.malonedeb@gandwana.ubuntu.com> Message-ID: <20060902204911.26396.55498.malone@gangotri.ubuntu.com> The PL3507 is widely known for a weak FireWire implementation and sometimes extremely bad firmware. USB is supposed to work better on this though. As far as sbp2 is concerned, failures to connect are perhaps fixed upstream. There was a regression in sbp2 concerning some PL3507 in Linux 2.6.16...2.6.16.19 inclusive. -- usb-mass storage disk isn't recognized the right way https://launchpad.net/bugs/36619 From stefan-r-ubz at s5r6.in-berlin.de Sat Sep 2 21:03:30 2006 From: stefan-r-ubz at s5r6.in-berlin.de (Stefan Richter) Date: Sat, 02 Sep 2006 21:03:30 -0000 Subject: [Bug 48317] Re: firewire not detected on resume from suspend References: <20060604045501.5009.86811.malonedeb@gandwana.ubuntu.com> Message-ID: <20060902210330.30981.93108.malone@gandwana.ubuntu.com> This is tracked as an upstream bug at http://bugzilla.kernel.org/show_bug.cgi?id=7072 . You could add your e-mail address there if you are interested in latest news. Don't expect a fix soon. As a workaround, mark ohci1394 (and perhaps the other IEEE 1394 drivers) to be unloaded before suspend. I don't know though how to do this in Ubuntu. -- firewire not detected on resume from suspend https://launchpad.net/bugs/48317 From stefan-r-ubz at s5r6.in-berlin.de Sat Sep 2 21:06:08 2006 From: stefan-r-ubz at s5r6.in-berlin.de (Stefan Richter) Date: Sat, 02 Sep 2006 21:06:08 -0000 Subject: [Bug 48317] Re: firewire not detected on resume from suspend References: <20060604045501.5009.86811.malonedeb@gandwana.ubuntu.com> Message-ID: <20060902210608.26396.44445.malone@gangotri.ubuntu.com> PS: Of course you should unmount any FireWire storage devices before unloading ohci1394. ** Bug 51052 has been marked a duplicate of this bug -- firewire not detected on resume from suspend https://launchpad.net/bugs/48317 From stefan-r-ubz at s5r6.in-berlin.de Sat Sep 2 21:09:51 2006 From: stefan-r-ubz at s5r6.in-berlin.de (Stefan Richter) Date: Sat, 02 Sep 2006 21:09:51 -0000 Subject: [Bug 51052] Re: ohci1394 module does not work after resume from suspend or hibernate References: <20060626200024.23311.84660.malonedeb@gangotri.ubuntu.com> Message-ID: <20060902210951.30936.32724.malone@gandwana.ubuntu.com> *** This bug is a duplicate of bug 48317 *** This is a duplicate of bug #48317. ** This bug has been marked a duplicate of bug 48317 firewire not detected on resume from suspend -- ohci1394 module does not work after resume from suspend or hibernate https://launchpad.net/bugs/51052 From stefan-r-ubz at s5r6.in-berlin.de Sat Sep 2 21:44:47 2006 From: stefan-r-ubz at s5r6.in-berlin.de (Stefan Richter) Date: Sat, 02 Sep 2006 21:44:47 -0000 Subject: [Bug 27659] Re: external hard disk disconnects (firewire ieee1394 over SCSI) during file copy 'Read-only file system' 'Device offlined' References: <20060113151840.29386.60242.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060902214447.26465.70289.malone@gangotri.ubuntu.com> In case anybody is still using Linux 2.6.12, there is a chance that sbp2's module parameter serialize_io=1 helps with this sort of problem. -- external hard disk disconnects (firewire ieee1394 over SCSI) during file copy 'Read-only file system' 'Device offlined' https://launchpad.net/bugs/27659 From desrt at desrt.ca Sat Sep 2 22:01:56 2006 From: desrt at desrt.ca (Ryan Lortie) Date: Sat, 02 Sep 2006 22:01:56 -0000 Subject: [Bug 28647] Re: sbp2 hot plug causes hard crashes References: <20060116010423.6087.7224.malonedeb@gangotri.ubuntu.com> Message-ID: <20060902220156.30981.81658.malone@gandwana.ubuntu.com> I'll be upgrading to edgy within a month or so and I'll try then. -- sbp2 hot plug causes hard crashes https://launchpad.net/bugs/28647 From stefan-r-ubz at s5r6.in-berlin.de Sat Sep 2 22:07:42 2006 From: stefan-r-ubz at s5r6.in-berlin.de (Stefan Richter) Date: Sat, 02 Sep 2006 22:07:42 -0000 Subject: [Bug 28691] Re: amd64 kernel locks on firewire ipod unplugging References: <20060116152545.30333.48749.malonedeb@gangotri.ubuntu.com> Message-ID: <20060902220742.30936.29698.malone@gandwana.ubuntu.com> Dapper may still be affected, or actually newly affected. See patch "sbp2: fix spinlock recursion" in upstream 2.6.16.2 and 2.6.17. http://www.kernel.org/git/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commitdiff_plain;h=24c7cd0630f76f0eb081d539c53893d9f15787e8 -- amd64 kernel locks on firewire ipod unplugging https://launchpad.net/bugs/28691 From stefan-r-ubz at s5r6.in-berlin.de Sat Sep 2 22:17:34 2006 From: stefan-r-ubz at s5r6.in-berlin.de (Stefan Richter) Date: Sat, 02 Sep 2006 22:17:34 -0000 Subject: [Bug 46991] Re: after upgrading default version of pmount, firewire drive will not automount anymore References: <20060527220131.9440.67889.malonedeb@gandwana.ubuntu.com> Message-ID: <20060902221734.30936.99049.malone@gandwana.ubuntu.com> I agree; it is a kernel driver problem or/and a firmware problem. Did you change anything else besides pmount? -- after upgrading default version of pmount, firewire drive will not automount anymore https://launchpad.net/bugs/46991 From crimsun at fungus.sh.nu Sun Sep 3 05:39:32 2006 From: crimsun at fungus.sh.nu (Daniel T Chen) Date: Sun, 03 Sep 2006 05:39:32 -0000 Subject: [Bug 44814] Re: No sound with Intel HDA/Realtek ALC861 References: <20060515111539.15848.19029.malonedeb@gangotri.ubuntu.com> Message-ID: <20060903053932.30936.93580.malone@gandwana.ubuntu.com> Mathias, is the symptom described in the original bug report still valid for 6.06.1? -- No sound with Intel HDA/Realtek ALC861 https://launchpad.net/bugs/44814 From crimsun at fungus.sh.nu Sun Sep 3 05:54:24 2006 From: crimsun at fungus.sh.nu (Daniel T Chen) Date: Sun, 03 Sep 2006 05:54:24 -0000 Subject: [Bug 25634] Re: Sound on ibook only works after (un)plugging headphones References: <20060113143446.21012.65385.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060903055424.30936.24665.malone@gandwana.ubuntu.com> https://lists.ubuntu.com/archives/kernel-team/2006-September/001048.html ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Confirmed => Fix Committed -- Sound on ibook only works after (un)plugging headphones https://launchpad.net/bugs/25634 From duncan at lithgow-schmidt.dk Sun Sep 3 10:47:54 2006 From: duncan at lithgow-schmidt.dk (Duncan Lithgow) Date: Sun, 03 Sep 2006 10:47:54 -0000 Subject: [Bug 54095] Re: monitor dim/brighten reversed (HP Pavilion dv8220ea) References: <20060726004246.22426.39308.malonedeb@gangotri.ubuntu.com> Message-ID: <20060903104754.30936.55726.malone@gandwana.ubuntu.com> I think I can confirm what William says. I've installed windows and see the same behavious. So this is not a an Ubuntu specific problem. I'll get in touch with HP and post a solution if I get one. -- monitor dim/brighten reversed (HP Pavilion dv8220ea) https://launchpad.net/bugs/54095 From briangeppert at gmail.com Sun Sep 3 11:38:13 2006 From: briangeppert at gmail.com (Brian Geppert) Date: Sun, 03 Sep 2006 11:38:13 -0000 Subject: [Bug 33368] Re: X freeze the computer (Dapper - glcore) References: <20060302082234.17525.50004.malonedeb@gangotri.ubuntu.com> Message-ID: <20060903113813.30981.87303.malone@gandwana.ubuntu.com> I have upgraded to Edgy Eft, and I am still experiencing the same issues with both -386 and -686 kernels. -- X freeze the computer (Dapper - glcore) https://launchpad.net/bugs/33368 From william.grant at ubuntu.com.au Sun Sep 3 11:42:17 2006 From: william.grant at ubuntu.com.au (William Grant) Date: Sun, 03 Sep 2006 11:42:17 -0000 Subject: [Bug 54095] Re: monitor dim/brighten reversed (HP Pavilion dv8220ea) References: <20060726004246.22426.39308.malonedeb@gangotri.ubuntu.com> Message-ID: <20060903114217.26396.3777.malone@gangotri.ubuntu.com> Rejecting, as it's not Ubuntu's problem. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Unconfirmed => Rejected -- monitor dim/brighten reversed (HP Pavilion dv8220ea) https://launchpad.net/bugs/54095 From xavier.verne at free.fr Sun Sep 3 16:27:07 2006 From: xavier.verne at free.fr (Xavier Verne) Date: Sun, 03 Sep 2006 16:27:07 -0000 Subject: [Bug 58726] Ejecting a USB hard tells you the wrong story References: <20060903162707.30936.65753.malonedeb@gandwana.ubuntu.com> Message-ID: <20060903162707.30936.65753.malonedeb@gandwana.ubuntu.com> Public bug reported: Dapper up to date, running Gnome Steps : 0. Plug a USB hard drive => Icons appear and Nautilus Launches 1. Edit a file located on the hard drive (don't save) 2. Right Click on the icon -> Eject 3. It tells he cannot find the partition (showing you the path) => It should say, "disk in use" or "file foo.txt is being edited" or something like that I've attached a screenshot of the popup preventing me for ejecting. After that, I saved the file I was editing, and it ejected perfectly the hard drive, removing icons for the two partitions of the disk !! ** Affects: linux-source-2.6.15 (Ubuntu) Importance: Untriaged Status: Unconfirmed -- Ejecting a USB hard tells you the wrong story https://launchpad.net/bugs/58726 From xavier.verne at free.fr Sun Sep 3 16:28:05 2006 From: xavier.verne at free.fr (Xavier Verne) Date: Sun, 03 Sep 2006 16:28:05 -0000 Subject: [Bug 58726] Re: Ejecting a USB hard tells you the wrong story References: <20060903162707.30936.65753.malonedeb@gandwana.ubuntu.com> Message-ID: <20060903162805.30981.20102.malone@gandwana.ubuntu.com> -- Ejecting a USB hard tells you the wrong story https://launchpad.net/bugs/58726 From thomas at karmann-paf.de Sun Sep 3 18:50:09 2006 From: thomas at karmann-paf.de (Thomas Karmann) Date: Sun, 03 Sep 2006 18:50:09 -0000 Subject: [Bug 58742] Important dvb-ttpci modules are missing in edgy! References: <20060903185009.30981.88325.malonedeb@gandwana.ubuntu.com> Message-ID: <20060903185009.30981.88325.malonedeb@gandwana.ubuntu.com> Public bug reported: Binary package hint: linux-image-2.6-amd64-generic I can't use my DVB-C TV-card in edgy because the whole branch of DVB-kernelmodules for PCIcards is missing (such as saa7146, ...). They were included in dapper. ** Affects: linux-meta (Ubuntu) Importance: Untriaged Status: Unconfirmed ** Description changed: Binary package hint: linux-image-2.6-amd64-generic - I can't use my DVB-C TV-card in edgy because the whole branch of DVB- - kernelmodules for PCIcards is missing (such as saa7146, ...). + I can't use my DVB-C TV-card in edgy because the whole branch of DVB-kernelmodules for PCIcards is missing (such as saa7146, ...). + They were included in dapper. -- [edgy] Important dvb-ttpci modules are missing in edgy! https://launchpad.net/bugs/58742 From thomas at karmann-paf.de Sun Sep 3 18:57:28 2006 From: thomas at karmann-paf.de (Thomas Karmann) Date: Sun, 03 Sep 2006 18:57:28 -0000 Subject: [Bug 58742] Re: [edgy] Important dvb-ttpci modules are missing in edgy! References: <20060903185009.30981.88325.malonedeb@gandwana.ubuntu.com> Message-ID: <20060903185728.26465.40728.launchpad@gangotri.ubuntu.com> ** Summary changed: - Important dvb-ttpci modules are missing in edgy! + [edgy] Important dvb-ttpci modules are missing in edgy! -- [edgy] Important dvb-ttpci modules are missing in edgy! https://launchpad.net/bugs/58742 From davidvonz at gmail.com Sun Sep 3 20:10:45 2006 From: davidvonz at gmail.com (David Bunch) Date: Sun, 03 Sep 2006 20:10:45 -0000 Subject: [Bug 46991] Re: [Bug 46991] Re: after upgrading default version of pmount, firewire drive will not automount anymore References: <20060527220131.9440.67889.malonedeb@gandwana.ubuntu.com> <20060902221734.30936.99049.malone@gandwana.ubuntu.com> Message-ID: <223e616a0609031310v1562f810m25ef057790bd3616@mail.gmail.com> Hi Stefan, Im pretty sure it was just pmount, because then i reinstalled from the cd and when I upgraded upgraded i unselected pmount and the drive mounted fine then. On 9/2/06, Stefan Richter wrote: > > I agree; it is a kernel driver problem or/and a firmware problem. Did > you change anything else besides pmount? > > -- > after upgrading default version of pmount, firewire drive will not > automount anymore > https://launchpad.net/bugs/46991 > -- Whoever fights monsters should see to it that in the process he does not become a monster. And when you look into an abyss, the abyss also looks into you. -- Friedrich Nietzsche -- after upgrading default version of pmount, firewire drive will not automount anymore https://launchpad.net/bugs/46991 From profox at ubuntu-nl.org Sun Sep 3 20:13:15 2006 From: profox at ubuntu-nl.org (profoX) Date: Sun, 03 Sep 2006 20:13:15 -0000 Subject: [Bug 36596] Re: system freeze after clicking task manager trash icon in "pan" newsreader References: <20060325145711.6279.38615.malonedeb@gandwana.ubuntu.com> Message-ID: <20060903201315.26396.83987.malone@gangotri.ubuntu.com> Update about the VT-switching bug: The VT-switching is another bug :) caused by AIGLX. The bug is posted on Freedesktop and there's already a temporary patch available there. https://bugs.freedesktop.org/show_bug.cgi?id=7916 -- system freeze after clicking task manager trash icon in "pan" newsreader https://launchpad.net/bugs/36596 From pw at byteshuffler.com Sun Sep 3 20:20:23 2006 From: pw at byteshuffler.com (Giblet5) Date: Sun, 03 Sep 2006 20:20:23 -0000 Subject: [Bug 58752] System hangs during boot in SMP mode References: <20060903202023.30936.5365.malonedeb@gandwana.ubuntu.com> Message-ID: <20060903202023.30936.5365.malonedeb@gandwana.ubuntu.com> Public bug reported: The symptom is that the boot process hangs and the keyboard is frozen. HW: MSI 945g NEO/Platinum M/B Intel Pentium D 920 (EMT64, dual core, C1E bios supported) 2 * 1024MB DDR533 On installing 6.0.6-1 (standard 386 kernel) everything works very well (for 386-UP). I then use synaptic to download/install the 2.6.15-26-686 SMP+UP kernel. It boots OK but hangs the instant the boot has completed. BUT if, in the BIOS, I turn OFF APIC, it boots fine. I have tried both APIC on with mps level 1.1 and 1.4, but both hang. This is very similar to the problem reported by 'Zoltan' in 9357. He never opened a bug report - he bought a new motherboard and CPU! Thanks in advance, Giblet5 ** Affects: linux-source-2.6.15 (Ubuntu) Importance: Untriaged Status: Unconfirmed -- System hangs during boot in SMP mode https://launchpad.net/bugs/58752 From stefan-r-ubz at s5r6.in-berlin.de Sun Sep 3 23:14:13 2006 From: stefan-r-ubz at s5r6.in-berlin.de (Stefan Richter) Date: Sun, 03 Sep 2006 23:14:13 -0000 Subject: [Bug 46991] Re: after upgrading default version of pmount, firewire drive will not automount anymore References: <20060527220131.9440.67889.malonedeb@gandwana.ubuntu.com> Message-ID: <20060903231413.30981.29082.malone@gandwana.ubuntu.com> Does the pmount package come with postinstall scripts that run some lowlevel reconfiguration? (I am not a Ubuntu user, just lurking here as an sbp2 kernel driver maintainer.) -- after upgrading default version of pmount, firewire drive will not automount anymore https://launchpad.net/bugs/46991 From thesicktwist at hotmail.com Mon Sep 4 01:55:54 2006 From: thesicktwist at hotmail.com (Jonathon Conte) Date: Mon, 04 Sep 2006 01:55:54 -0000 Subject: [Bug 32637] Re: no sound with on-board Analog Devices ADI AD1986A References: <20060223182024.16580.76061.malonedeb@gandwana.ubuntu.com> Message-ID: <20060904015554.30936.29815.malone@gandwana.ubuntu.com> I just tested with 6.06.1 and the onboard sound is working. Hooray! -- no sound with on-board Analog Devices ADI AD1986A https://launchpad.net/bugs/32637 From davidvonz at gmail.com Mon Sep 4 02:40:46 2006 From: davidvonz at gmail.com (David Bunch) Date: Mon, 04 Sep 2006 02:40:46 -0000 Subject: [Bug 46991] Re: [Bug 46991] Re: after upgrading default version of pmount, firewire drive will not automount anymore References: <20060527220131.9440.67889.malonedeb@gandwana.ubuntu.com> <20060903231413.30981.29082.malone@gandwana.ubuntu.com> Message-ID: <223e616a0609031940k7d51fe4cva8506d88048deadb@mail.gmail.com> hmm im not sure, but i can take a look at get back to you on that. On 9/3/06, Stefan Richter wrote: > > Does the pmount package come with postinstall scripts that run some > lowlevel reconfiguration? > > (I am not a Ubuntu user, just lurking here as an sbp2 kernel driver > maintainer.) > > -- > after upgrading default version of pmount, firewire drive will not > automount anymore > https://launchpad.net/bugs/46991 > -- Whoever fights monsters should see to it that in the process he does not become a monster. And when you look into an abyss, the abyss also looks into you. -- Friedrich Nietzsche -- after upgrading default version of pmount, firewire drive will not automount anymore https://launchpad.net/bugs/46991 From crimsun at fungus.sh.nu Mon Sep 4 04:17:56 2006 From: crimsun at fungus.sh.nu (Daniel T Chen) Date: Mon, 04 Sep 2006 04:17:56 -0000 Subject: [Bug 32637] Re: no sound with on-board Analog Devices ADI AD1986A References: <20060223182024.16580.76061.malonedeb@gandwana.ubuntu.com> Message-ID: <20060904041756.26396.36658.malone@gangotri.ubuntu.com> Closing per submitter feedback. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Needs Info => Fix Released -- no sound with on-board Analog Devices ADI AD1986A https://launchpad.net/bugs/32637 From jerome_nouvel at yahoo.fr Mon Sep 4 09:30:06 2006 From: jerome_nouvel at yahoo.fr (minority) Date: Mon, 04 Sep 2006 09:30:06 -0000 Subject: [Bug 58832] sound problem with realtek alc850 on nforce4 References: <20060904093006.26465.28838.malonedeb@gangotri.ubuntu.com> Message-ID: <20060904093006.26465.28838.malonedeb@gangotri.ubuntu.com> Public bug reported: I have a realtek alc 850 with my motherboard. I can't have 5.1 sound. A "speaker-test -c 6" give me sound on bad speaker : no prob on front speakers, no sound on rear speakers, LFE on rear right, and center on rear right!!! However option "duplicate front" works very well in stereo, I'have sound on rear speakers... I'don't understand.... ** Affects: linux-source-2.6.15 (Ubuntu) Importance: Untriaged Status: Unconfirmed -- sound problem with realtek alc850 on nforce4 https://launchpad.net/bugs/58832 From johan.walles at gmail.com Mon Sep 4 11:57:26 2006 From: johan.walles at gmail.com (Johan Walles) Date: Mon, 04 Sep 2006 11:57:26 -0000 Subject: [Bug 49450] Re: 2.6.15-26-686 hangs a couple of times per week References: <20060612112731.25801.13769.malonedeb@gangotri.ubuntu.com> Message-ID: <20060904115727.30936.24632.malone@gandwana.ubuntu.com> YAC :-(. Is there some documentation describing what to do about things like this? I can't be the only person who has ever been affected by something like this... -- 2.6.15-23-686 hangs a couple of times per week https://launchpad.net/bugs/49450 From danielpf at gmail.com Mon Sep 4 12:28:28 2006 From: danielpf at gmail.com (danielpf) Date: Mon, 04 Sep 2006 12:28:28 -0000 Subject: [Bug 32689] Re: Hibernate works once, but not twice (dapper) References: <20060224083000.16638.47377.malonedeb@gandwana.ubuntu.com> Message-ID: <20060904122828.30936.52393.malone@gandwana.ubuntu.com> Dapper 6.06: on a Dell Latitude D600 I can well hibernate once, but not twice. On the second attempt the system just doesn't start to hibernate. For a laptop I consider this as a major problem because a laptop is often used (e.g. on travel) for short moments between which one doesn't want to restart the whole system and apps. -- Hibernate sometimes dont work https://launchpad.net/bugs/32689 From enricoss at tiscali.it Mon Sep 4 12:33:22 2006 From: enricoss at tiscali.it (Enrico Sardi) Date: Mon, 04 Sep 2006 12:33:22 -0000 Subject: [Bug 34144] Re: sis 760 + radeon 9250 = no acceleration References: <20060308221458.29403.93806.malonedeb@gangotri.ubuntu.com> Message-ID: <20060904123322.30936.52638.launchpad@gandwana.ubuntu.com> ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Unconfirmed => Confirmed -- sis 760 + radeon 9250 = no acceleration https://launchpad.net/bugs/34144 From pw at byteshuffler.com Mon Sep 4 14:36:20 2006 From: pw at byteshuffler.com (Giblet5) Date: Mon, 04 Sep 2006 14:36:20 -0000 Subject: [Bug 58752] Re: System hangs during boot in SMP mode References: <20060903202023.30936.5365.malonedeb@gandwana.ubuntu.com> Message-ID: <20060904143620.30936.50808.launchpad@gandwana.ubuntu.com> ** Description changed: The symptom is that the boot process hangs and the keyboard is frozen. - HW: MSI 945g NEO/Platinum M/B + HW: MSI 945p NEO/Platinum M/B Intel Pentium D 920 (EMT64, dual core, C1E bios supported) - 2 * 1024MB DDR533 + 2 * 1024MB DDR667 On installing 6.0.6-1 (standard 386 kernel) everything works very well (for 386-UP). I then use synaptic to download/install the 2.6.15-26-686 SMP+UP kernel. It boots OK but hangs the instant the boot has completed. BUT if, in the BIOS, I turn OFF APIC, it boots fine. I have tried both APIC on with mps level 1.1 and 1.4, but both hang. This is very similar to the problem reported by 'Zoltan' in 9357. He never opened a bug report - he bought a new motherboard and CPU! Thanks in advance, Giblet5 -- System hangs during boot in SMP mode https://launchpad.net/bugs/58752 From akonstantinov at yahoo.com Mon Sep 4 14:40:50 2006 From: akonstantinov at yahoo.com (Aleksandr) Date: Mon, 04 Sep 2006 14:40:50 -0000 Subject: [Bug 9034] Re: [prism54 driver] Can't connect to AP on channel 13 References: <20060113130733.21012.34327.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060904144050.30981.97218.malone@gandwana.ubuntu.com> I confirm that this problem still exists in linux-2.6.17.11 . I'm having this problem right now with SM2835W card. I also tried all firmwares i could find up to 1.0.4.3 . -- [prism54 driver] Can't connect to AP on channel 13 https://launchpad.net/bugs/9034 From RoadTripDK at MyRealBox.com Mon Sep 4 15:08:24 2006 From: RoadTripDK at MyRealBox.com (RoadTripDK) Date: Mon, 04 Sep 2006 15:08:24 -0000 Subject: [Bug 23445] Re: iMac G5 will freeze after booting up References: <20060113142343.21012.90472.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060904150824.26465.54075.malone@gangotri.ubuntu.com> I just tried Dapper 6.061 (xubuntu) on my G5 single (PowerMac 9.1) and the same problems are there that go all of the way back to Breezy Badger (5.10): 1) Freezes at startup due to (among other things???) sound driver. 2) Lack of thermal fan control. This has been going on forever. Are there any developers out there listening, or has Ubuntu given up on the PPC platform? How can you release new "versions" of Ubuntu and derivatives, without addressing the issues on "newer" Macs (ie Macs that are only 2-3 years old)? Not everyone feels comfortable with compiling a new kernel or see the need, when Ubuntu "claims" that it supports the PPC architecture. Let's try to get these issues sorted guys. -- iMac G5 will freeze after booting up https://launchpad.net/bugs/23445 From ambrmi09 at gmail.com Mon Sep 4 15:14:14 2006 From: ambrmi09 at gmail.com (Michael Ambrus) Date: Mon, 04 Sep 2006 15:14:14 -0000 Subject: [Bug 35741] Re: Wrong module directory used when loading i915_dri.so ? References: <20060320165822.22884.84072.malonedeb@gangotri.ubuntu.com> Message-ID: <20060904151415.26396.95960.malone@gangotri.ubuntu.com> This bug (or a varint of it) is still around (I'm using Ubuntu 6.06 LTS). I wasn't able to enable DRI for i915 despite all the hints available until I stumbled across this thread and repeated some of the experimentation's that Ariel did. This solved my issue, and it possibly also provides a hint to this (or a related) bug. The symptoms I got was that /var/log/Xorg.0.log and dmsg both showed all the signs that DRI was enabled. But still, no matter how I tried, I couldn't get glxinfo show that "direct rendering" was enabled. Eventually my suspicions lead me to believe that there was something broken between glx and the lower layers and that the symptoms resembled the ones mentioned here. (I didn't however see any message about i915_dri.so not being found.) So I did the following: ------------------------------------- dpkg -L libgl1-mesa-dri : usr/lib/libGL.so.1.2 diverted by xorg-driver-fglrx to: /usr/lib/fglrx/libGL.so.1.2.xlibmesa : ------------------------------------- errm, wait-a-minute what's this...? fglrx? That's for ATI cards. Further investigation showed that this file belongs to xorg-driver-fglrx, which was installed, but so was also all other drivers (xorg-driver-all) as well. I simply removing xorg-driver-fglrx, restarted X and all worked peaches. Repeating the command above now showed that usr/lib/libGL.so.1.2 no longer was diverted either (whatever that is ;) ). Noticeable is that the system I'm using is almost brand new and I didn't recompile neither the kernel nor any of the kernel- or X- drivers/modules. Furthermore I think that the symlink patches above isn't needed any longer (at least not for my current version of the system). Hope this helps and thanx for a good job with Ubuntu. /Michael -- Wrong module directory used when loading i915_dri.so ? https://launchpad.net/bugs/35741 From cruiseoveride at gmail.com Mon Sep 4 15:45:21 2006 From: cruiseoveride at gmail.com (cruiseoveride) Date: Mon, 04 Sep 2006 15:45:21 -0000 Subject: [Bug 23445] Re: iMac G5 will freeze after booting up References: <20060113142343.21012.90472.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060904154522.30936.762.malone@gandwana.ubuntu.com> These problems are very specific to ubuntu, as a similar setup (linux kernel, gdm, gnome etc) forund on Fedora Core work perfectly on the new iMac. I suggest someone install Fedora Core and use it for deubugging to catch the symbols coming from gdm during the freeze point on ubuntu. -- iMac G5 will freeze after booting up https://launchpad.net/bugs/23445 From igor4u at gmail.com Mon Sep 4 18:13:01 2006 From: igor4u at gmail.com (Igor Zubarev) Date: Mon, 04 Sep 2006 18:13:01 -0000 Subject: [Bug 35319] Re: no Fn at all Vaio SZ1XP Dapper References: <20060317124552.11105.6446.malonedeb@gandwana.ubuntu.com> Message-ID: <20060904181301.30936.42577.malone@gandwana.ubuntu.com> Confirm for Sony VAIO VGN-FS115MR, Dapper. I don't get to work the Fn+something keys at all. No S1 nor S2 keys neither. Power button works. -- no Fn at all Vaio SZ1XP Dapper https://launchpad.net/bugs/35319 From federico.sassi1 at studenti.unipr.it Mon Sep 4 18:23:46 2006 From: federico.sassi1 at studenti.unipr.it (Federico Sassi) Date: Mon, 04 Sep 2006 18:23:46 -0000 Subject: [Bug 25673] Re: Keyboard and touchpad doesn't work after suspend-to-ram on a Fujitsu-Siemens Amilo M1420 References: <20060113143457.21012.29014.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060904182346.30981.75845.malone@gandwana.ubuntu.com> ops, sorry if I didn't answer you before but I have missed the mail containing your answer! I'm on a laptop and I don't have a ps2 port! Moreover my usb mouse doesn't have any problem! It's my (integrated) ps2-keyboard that freeze! So what can I do? Should I try edgy knot-2? Federico -- Keyboard and touchpad doesn't work after suspend-to-ram on a Fujitsu-Siemens Amilo M1420 https://launchpad.net/bugs/25673 From eruyome at gmail.com Mon Sep 4 18:44:22 2006 From: eruyome at gmail.com (Emmanuel Ch.) Date: Mon, 04 Sep 2006 18:44:22 -0000 Subject: [Bug 23445] Re: [Bug 23445] Re: iMac G5 will freeze after booting up References: <20060113142343.21012.90472.launchpad@macquarie.warthogs.hbd.com> <20060904154522.30936.762.malone@gandwana.ubuntu.com> Message-ID: <41f9af070609041144i5bf06001h18572a3ca240bfbe@mail.gmail.com> Guys you could read the replies. It is said that in edgy eft it is fixed. I've tried it on my "problematic" single g5 and it works, with sound and everything (except bluetooth i guess) Just wait for edgy to be released :) On 9/4/06, cruiseoveride wrote: > These problems are very specific to ubuntu, as a similar setup (linux kernel, gdm, gnome etc) forund on Fedora Core work perfectly on the new iMac. > I suggest someone install Fedora Core and use it for deubugging to catch the symbols coming from gdm during the freeze point on ubuntu. > > -- > iMac G5 will freeze after booting up > https://launchpad.net/bugs/23445 > -- - morthul surinen fenya quelli (R.I.P 0x7D4) -- iMac G5 will freeze after booting up https://launchpad.net/bugs/23445 From me at jonwatson.ca Mon Sep 4 23:58:09 2006 From: me at jonwatson.ca (Jon) Date: Mon, 04 Sep 2006 23:58:09 -0000 Subject: [Bug 52302] Re: Intel Pro Wireless 3945 is not detected with latest kernel update References: <20060708063621.27257.43382.malonedeb@gangotri.ubuntu.com> Message-ID: <20060904235809.30936.94118.malone@gandwana.ubuntu.com> Hello, I am experiencing the same issue. I have been running the intial release of Kubuntu 6.06 from June until recently. Two days ago I decided to try another distro, was unhappy, and have come back to Kubuntu. I downloaded the most recent ISO and installed it. I now have the same symptons as Vijay. When booted into the stock 386 kernel, my Intel 3945 works fine on my Dell Inspiron 9400 (Canadian version of the E1705). However, after upgrading to the 2.6.15.26-686 kernel, my wireless is no longer detected. I do have the linux-smp-686 (or perhaps linux-686-smp) package installed. -- Intel Pro Wireless 3945 is not detected with latest kernel update https://launchpad.net/bugs/52302 From me at jonwatson.ca Tue Sep 5 00:17:16 2006 From: me at jonwatson.ca (Jon) Date: Tue, 05 Sep 2006 00:17:16 -0000 Subject: [Bug 52302] Re: Intel Pro Wireless 3945 is not detected with latest kernel update References: <20060708063621.27257.43382.malonedeb@gangotri.ubuntu.com> Message-ID: <20060905001716.26465.47872.malone@gangotri.ubuntu.com> I should have noted that the 2.6.15.23 kernel works fine. -- Intel Pro Wireless 3945 is not detected with latest kernel update https://launchpad.net/bugs/52302 From 3eq9v5q02 at sneakemail.com Tue Sep 5 04:53:00 2006 From: 3eq9v5q02 at sneakemail.com (Mark) Date: Tue, 05 Sep 2006 04:53:00 -0000 Subject: [Bug 23445] Re: iMac G5 will freeze after booting up References: <20060113142343.21012.90472.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060905045300.24877.13267.malone@gandwana.ubuntu.com> We use a "rev B" model with bluetooth mouse/keyboard from Apple. This means until bluetooth is fixed we can't even test anything. -- iMac G5 will freeze after booting up https://launchpad.net/bugs/23445 From tburmas at yahoo.com Tue Sep 5 10:54:10 2006 From: tburmas at yahoo.com (linuxted) Date: Tue, 05 Sep 2006 10:54:10 -0000 Subject: [Bug 58339] Re: no sound at all. Even unmuted References: <20060831122211.5486.89963.malonedeb@gandwana.ubuntu.com> Message-ID: <20060905105411.23096.97044.launchpad@gangotri.ubuntu.com> ** Also affects: alsa-driver (upstream) Importance: Untriaged Status: Unconfirmed -- no sound at all. Even unmuted https://launchpad.net/bugs/58339 From eruyome at gmail.com Tue Sep 5 11:01:39 2006 From: eruyome at gmail.com (Emmanuel Ch.) Date: Tue, 05 Sep 2006 11:01:39 -0000 Subject: [Bug 23445] Re: [Bug 23445] Re: iMac G5 will freeze after booting up References: <20060113142343.21012.90472.launchpad@macquarie.warthogs.hbd.com> <20060905045300.24877.13267.malone@gandwana.ubuntu.com> Message-ID: <41f9af070609050401s16062383w3e9913862fecf817@mail.gmail.com> Well, revB comes with a bundled USB keyboard/mouse doesnt it? You can still connect it when running linux and work :) On 9/5/06, Mark <3eq9v5q02 at sneakemail.com> wrote: > We use a "rev B" model with bluetooth mouse/keyboard from Apple. This > means until bluetooth is fixed we can't even test anything. > > -- > iMac G5 will freeze after booting up > https://launchpad.net/bugs/23445 > -- - morthul surinen fenya quelli (R.I.P 0x7D4) -- iMac G5 will freeze after booting up https://launchpad.net/bugs/23445 From alfred.s at nexicom.net Tue Sep 5 12:47:22 2006 From: alfred.s at nexicom.net (Alfred) Date: Tue, 05 Sep 2006 12:47:22 -0000 Subject: [Bug 58339] Re: [Bug 58339] Re: no sound at all. Even unmuted References: <20060831122211.5486.89963.malonedeb@gandwana.ubuntu.com> <20060905105411.23096.97044.launchpad@gangotri.ubuntu.com> Message-ID: <1157460442.24932.2.camel@localhost> Hi: I had that problem after an upgrade, for Ubuntu 6.06.1. I opened Synaptic, and made a search for Alsa. Then I installed all the items that came up for the search. after rebooting, the sound worked again! Alfred! On Tue, 2006-05-09 at 10:54 +0000, linuxted wrote: > ** Also affects: alsa-driver (upstream) > Importance: Untriaged > Status: Unconfirmed > > -- > no sound at all. Even unmuted > https://launchpad.net/bugs/58339 > -- no sound at all. Even unmuted https://launchpad.net/bugs/58339 From 3eq9v5q02 at sneakemail.com Tue Sep 5 16:40:22 2006 From: 3eq9v5q02 at sneakemail.com (Mark) Date: Tue, 05 Sep 2006 16:40:22 -0000 Subject: [Bug 23445] Re: iMac G5 will freeze after booting up References: <20060113142343.21012.90472.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060905164022.3977.17475.malone@gandwana.ubuntu.com> > Well, revB comes with a bundled USB > keyboard/mouse doesnt it? You can > still connect it when running linux and work :) No it does not and no we cannot. Bluetooth-only input was a stock factory configuration from Apple, a popular one we hear. -- iMac G5 will freeze after booting up https://launchpad.net/bugs/23445 From bobby.weinmann at gmail.com Tue Sep 5 16:49:20 2006 From: bobby.weinmann at gmail.com (ybkosher) Date: Tue, 05 Sep 2006 16:49:20 -0000 Subject: [Bug 46879] Re: mencoder no longer records sound when using v4l2 and alsa References: <20060527110916.9357.99128.malonedeb@gangotri.ubuntu.com> Message-ID: <20060905164920.3977.46759.malone@gandwana.ubuntu.com> This does not seem to be a problem in the kernel. I recompiled MPlayer myself and recording sound works. I have kernel 2.6.15-26-k7. -- mencoder no longer records sound when using v4l2 and alsa https://launchpad.net/bugs/46879 From tburmas at yahoo.com Tue Sep 5 18:45:45 2006 From: tburmas at yahoo.com (linuxted) Date: Tue, 05 Sep 2006 18:45:45 -0000 Subject: [Bug 58339] Re: [Bug 58339] Re: [Bug 58339] Re: no sound at all. Even unmuted References: <20060831122211.5486.89963.malonedeb@gandwana.ubuntu.com> <20060905105411.23096.97044.launchpad@gangotri.ubuntu.com> <1157460442.24932.2.camel@localhost> Message-ID: <20060905184546.37798.qmail@web33101.mail.mud.yahoo.com> Alfred, Thanks for the information. I tried reinstalling everything that was *previously* installed using your method with no luck. Did you mean you installed *everything* that came up after a search for Alsa (there were about 40 items)?! Thanks Alfred wrote: Hi: I had that problem after an upgrade, for Ubuntu 6.06.1. I opened Synaptic, and made a search for Alsa. Then I installed all the items that came up for the search. after rebooting, the sound worked again! Alfred! On Tue, 2006-05-09 at 10:54 +0000, linuxted wrote: > ** Also affects: alsa-driver (upstream) > Importance: Untriaged > Status: Unconfirmed > > -- > no sound at all. Even unmuted > https://launchpad.net/bugs/58339 > -- no sound at all. Even unmuted https://launchpad.net/bugs/58339 --------------------------------- Get your own web address for just $1.99/1st yr. We'll help. Yahoo! Small Business. -- no sound at all. Even unmuted https://launchpad.net/bugs/58339 From lure.net at gmail.com Tue Sep 5 19:57:21 2006 From: lure.net at gmail.com (Luka Renko) Date: Tue, 05 Sep 2006 19:57:21 -0000 Subject: [Bug 55150] Re: The headphone jack in the docking station doesn't work References: <20060804071028.9299.89483.malonedeb@gandwana.ubuntu.com> Message-ID: <20060905195722.29144.18644.malone@gangotri.ubuntu.com> Ignore my report: KMix master volume was not active for headsets and headset channel was set to volume zero. -- The headphone jack in the docking station doesn't work https://launchpad.net/bugs/55150 From eruyome at gmail.com Tue Sep 5 20:52:54 2006 From: eruyome at gmail.com (Emmanuel Ch.) Date: Tue, 05 Sep 2006 20:52:54 -0000 Subject: [Bug 23445] Re: [Bug 23445] Re: iMac G5 will freeze after booting up References: <20060113142343.21012.90472.launchpad@macquarie.warthogs.hbd.com> <20060905164022.3977.17475.malone@gandwana.ubuntu.com> Message-ID: <41f9af070609051352o3b02e2adkb1964bf34d53de88@mail.gmail.com> Tested bluetooth today, exchanging files with my mobile phone and it works. On 9/5/06, Mark <3eq9v5q02 at sneakemail.com> wrote: > > > Well, revB comes with a bundled USB > > keyboard/mouse doesnt it? You can > > still connect it when running linux and work :) > > No it does not and no we cannot. Bluetooth-only input was a stock > factory configuration from Apple, a popular one we hear. > > -- > iMac G5 will freeze after booting up > https://launchpad.net/bugs/23445 > -- - morthul surinen fenya quelli (R.I.P 0x7D4) -- iMac G5 will freeze after booting up https://launchpad.net/bugs/23445 From aleixpol at gmail.com Tue Sep 5 21:54:32 2006 From: aleixpol at gmail.com (=?utf-8?q?Aleix_Pol_Gonz=C3=A0lez?=) Date: Tue, 05 Sep 2006 21:54:32 -0000 Subject: [Bug 57383] Re: fn key no longer works on kernel References: <20060823015246.13463.59145.malonedeb@gandwana.ubuntu.com> Message-ID: <20060905215432.29144.2718.malone@gangotri.ubuntu.com> Doesn't work for me as well. -- fn key no longer works on kernel https://launchpad.net/bugs/57383 From kaizoku.alucard at gmail.com Tue Sep 5 23:17:37 2006 From: kaizoku.alucard at gmail.com (coffee) Date: Tue, 05 Sep 2006 23:17:37 -0000 Subject: [Bug 59099] No boot with USB DVD drive References: <20060905231738.3933.6768.malonedeb@gandwana.ubuntu.com> Message-ID: <20060905231738.3933.6768.malonedeb@gandwana.ubuntu.com> Public bug reported: Binary package hint: linux-image-686 If I have my USB DVD drive on, then when linux boot, I have: Uncompressing Linux... Ok, booting the kernel. And nothing happens. When it is off, It works fine. When I put it on, dmesg give me: [17179680.664000] ISOFS: changing to secondary root [17180189.856000] usb 5-1.4: new high speed USB device using ehci_hcd and address 8 [17180190.060000] Initializing USB Mass Storage driver... [17180190.060000] scsi5 : SCSI emulation for USB Mass Storage devices [17180190.060000] usb-storage: device found at 8 [17180190.060000] usb-storage: waiting for device to settle before scanning [17180190.060000] usbcore: registered new driver usb-storage [17180190.060000] USB Mass Storage support registered. [17180195.060000] Vendor: PHILIPS Model: PBDV1640P Rev: B2.5 [17180195.060000] Type: CD-ROM ANSI SCSI revision: 00 [17180195.072000] sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray [17180195.072000] sr 5:0:0:0: Attached scsi CD-ROM sr0 [17180195.072000] sr 5:0:0:0: Attached scsi generic sg1 type 5 [17180195.080000] usb-storage: device scan complete My motherboard is a P4P800-E deluxe from ASUS. My DVD drive is IDE but I put it inside a USB<->IDE box from connectland. I have tested a lot of kernel image and it happens always. This problem is minor because I can boot by switching off my DVD drive. ** Affects: linux-meta (Ubuntu) Importance: Untriaged Status: Unconfirmed -- No boot with USB DVD drive https://launchpad.net/bugs/59099 From jbouzane at gmail.com Wed Sep 6 07:11:14 2006 From: jbouzane at gmail.com (Jason Bouzane) Date: Wed, 06 Sep 2006 07:11:14 -0000 Subject: [Bug 59136] Real time clock (RTC) runs 50% too fast when speedstep is enabled References: <20060906071114.3933.75618.malonedeb@gandwana.ubuntu.com> Message-ID: <20060906071114.3933.75618.malonedeb@gandwana.ubuntu.com> Public bug reported: Binary package hint: kernel-image-2.6.15-26-amd64-generic-di I have an Intel Core 2 Duo 2.4 GHz CPU. When Speedstep is enabled and the CPU is slowed, the clock runs at 150% the normal speed. The timer interrupts continue to occur at 250/second as they should, but the clock runs too fast, leading to various system problems (sound too fast, lockups, hardware not functioning, etc.). When the CPU is busy (CPU is at full speed), the clock runs normally. Disabling speedstep fixes the problem. Distribution: Kubuntu 6.06 amd64 ** Affects: linux-source-2.6.15 (Ubuntu) Importance: Untriaged Status: Unconfirmed -- Real time clock (RTC) runs 50% too fast when speedstep is enabled https://launchpad.net/bugs/59136 From martin.pitt at ubuntu.com Wed Sep 6 08:18:05 2006 From: martin.pitt at ubuntu.com (Martin Pitt) Date: Wed, 06 Sep 2006 08:18:05 -0000 Subject: [Bug 59109] Re: ath0 ERRORS on dapper drake References: <20060906005728.29144.41704.malonedeb@gangotri.ubuntu.com> Message-ID: <20060906081806.3977.64623.launchpad@gandwana.ubuntu.com> ** Visibility changed to: Public ** This bug is no longer flagged as a security issue ** Changed in: linux-meta (Ubuntu) Sourcepackagename: linux-meta => linux-source-2.6.15 -- ath0 ERRORS on dapper drake https://launchpad.net/bugs/59109 From johan.walles at gmail.com Wed Sep 6 09:39:49 2006 From: johan.walles at gmail.com (Johan Walles) Date: Wed, 06 Sep 2006 09:39:49 -0000 Subject: [Bug 49450] Alt-SysRq doesn't work either References: <20060612112731.25801.13769.malonedeb@gangotri.ubuntu.com> Message-ID: <20060906093949.3933.37452.malone@gandwana.ubuntu.com> At today's crash I tried Alt-SysRq S(ync) U(nmount) B(oot). Didn't work. By watching my syslog I have verified that it works while the system is up and running. So the hang is in some place that prevents Alt-SysRq from doing its thing. Help? -- 2.6.15-23-686 hangs a couple of times per week https://launchpad.net/bugs/49450 From giuseppe at eppesuigoccas.homedns.org Wed Sep 6 11:16:58 2006 From: giuseppe at eppesuigoccas.homedns.org (Giuseppe Sacco) Date: Wed, 06 Sep 2006 11:16:58 -0000 Subject: [Bug 59163] cannot load aic7xxx module References: <20060906111658.29298.79380.malonedeb@gangotri.ubuntu.com> Message-ID: <20060906111658.29298.79380.malonedeb@gangotri.ubuntu.com> Public bug reported: Binary package hint: linux-image-2.6.15-26-686 We have a new Ubuntu box with standard kernel and two different SCSI adapters. On the first adapter we have all disks, while on the second one we only have a tape. The first one is handled by the megaraid kernel module, the second one by aic7xxx. When, during boot up or manually invoking modprobe, the aic7xxx module is loaded, we get this error /var/log/kern.log: Aug 30 13:32:42 srv-lecco-a kernel: [17179572.864000] aic7xxx: Unknown symbol spi2_populate_width_msg Aug 30 13:32:42 srv-lecco-a kernel: [17179572.864000] aic7xxx: Unknown symbol spi2_populate_sync_msg Aug 30 13:32:42 srv-lecco-a kernel: [17179572.864000] aic7xxx: Unknown symbol spi2_dv_device Aug 30 13:32:42 srv-lecco-a kernel: [17179572.864000] aic7xxx: Unknown symbol spi2_display_xfer_agreement Aug 30 13:32:42 srv-lecco-a kernel: [17179572.864000] aic7xxx: Unknown symbol spi2_populate_ppr_msg Aug 30 13:32:42 srv-lecco-a kernel: [17179572.864000] aic7xxx: Unknown symbol spi2_attach_transport Aug 30 13:32:42 srv-lecco-a kernel: [17179572.864000] aic7xxx: Unknown symbol spi2_release_transport The machine is DELL poweredge 1800. lspci output is: 0000:00:00.0 Host bridge: Intel Corp. Server Memory Controller Hub (rev 09) 0000:00:02.0 PCI bridge: Intel Corp. Memory Controller Hub PCI Express Port A0 (rev 09) 0000:00:04.0 PCI bridge: Intel Corp. Memory Controller Hub PCI Express Port B0 (rev 09) 0000:00:06.0 PCI bridge: Intel Corp. Memory Controller Hub PCI Express Port C0 (rev 09) 0000:00:1d.0 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #1 (rev 02) 0000:00:1d.1 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #2 (rev 02) 0000:00:1d.2 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #3 (rev 02) 0000:00:1d.7 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller (rev 02) 0000:00:1e.0 PCI bridge: Intel Corp. 82801 PCI Bridge (rev c2) 0000:00:1f.0 ISA bridge: Intel Corp. 82801EB/ER (ICH5/ICH5R) LPC Bridge (rev 02) 0000:00:1f.1 IDE interface: Intel Corp. 82801EB/ER (ICH5/ICH5R) Ultra ATA 100 Storage Controller (rev 02) 0000:00:1f.2 IDE interface: Intel Corp. 82801EB (ICH5) Serial ATA 150 Storage Controller (rev 02) 0000:01:00.0 PCI bridge: Intel Corp. PCI Bridge Hub A (rev 09) 0000:01:00.2 PCI bridge: Intel Corp. PCI Bridge Hub B (rev 09) 0000:02:04.0 SCSI storage controller: LSI Logic / Symbios Logic 53c1030 PCI-X Fusion-MPT Dual Ultra320 SCSI (rev 08) 0000:02:05.0 Ethernet controller: Intel Corp. 82545GM Gigabit Ethernet Controller (rev 04) 0000:03:07.0 Ethernet controller: Intel Corp. 82541GI/PI Gigabit Ethernet Controller (rev 05) 0000:03:09.0 SCSI storage controller: Adaptec AHA-3960D / AIC-7899A U160/m (rev 01) 0000:03:09.1 SCSI storage controller: Adaptec AHA-3960D / AIC-7899A U160/m (rev 01) 0000:04:00.0 PCI bridge: Intel Corp. 80332 [Dobson] I/O processor (rev 07) 0000:04:00.2 PCI bridge: Intel Corp. 80332 [Dobson] I/O processor (rev 07) 0000:05:0e.0 RAID bus controller: LSI Logic / Symbios Logic MegaRAID (rev 07) 0000:08:05.0 VGA compatible controller: ATI Technologies Inc Radeon RV100 QY [Radeon 7000/VE] This is a more detailed syslog: Aug 30 13:32:42 srv-lecco-a kernel: [17179572.828000] libata version 1.20 loaded. Aug 30 13:32:42 srv-lecco-a kernel: [17179572.836000] ata_piix 0000:00:1f.2: version 1.05 Aug 30 13:32:42 srv-lecco-a kernel: [17179572.836000] ata_pci_init_one: pci_dev class+intf: 0x1018f Aug 30 13:32:42 srv-lecco-a kernel: [17179572.836000] ata_pci_init_one: NO_LEGACY == 0 Aug 30 13:32:42 srv-lecco-a kernel: [17179572.836000] ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 18 (level, low) -> IRQ 185 Aug 30 13:32:42 srv-lecco-a kernel: [17179572.836000] PCI: Setting latency timer of device 0000:00:1f.2 to 64 Aug 30 13:32:42 srv-lecco-a kernel: [17179572.836000] ata1: PATA max UDMA/133 cmd 0xBC98 ctl 0xBC92 bmdma 0xBC60 irq 185 Aug 30 13:32:42 srv-lecco-a kernel: [17179572.836000] ata2: PATA max UDMA/133 cmd 0xBC80 ctl 0xBC7A bmdma 0xBC68 irq 185 Aug 30 13:32:42 srv-lecco-a kernel: [17179572.836000] ata1: SATA port has no device. Aug 30 13:32:42 srv-lecco-a kernel: [17179572.836000] scsi0 : ata_piix Aug 30 13:32:42 srv-lecco-a kernel: [17179572.836000] ata2: SATA port has no device. Aug 30 13:32:42 srv-lecco-a kernel: [17179572.836000] scsi1 : ata_piix Aug 30 13:32:42 srv-lecco-a kernel: [17179572.864000] aic7xxx: Unknown symbol spi2_populate_width_msg Aug 30 13:32:42 srv-lecco-a kernel: [17179572.864000] aic7xxx: Unknown symbol spi2_populate_sync_msg Aug 30 13:32:42 srv-lecco-a kernel: [17179572.864000] aic7xxx: Unknown symbol spi2_dv_device Aug 30 13:32:42 srv-lecco-a kernel: [17179572.864000] aic7xxx: Unknown symbol spi2_display_xfer_agreement Aug 30 13:32:42 srv-lecco-a kernel: [17179572.864000] aic7xxx: Unknown symbol spi2_populate_ppr_msg Aug 30 13:32:42 srv-lecco-a kernel: [17179572.864000] aic7xxx: Unknown symbol spi2_attach_transport Aug 30 13:32:42 srv-lecco-a kernel: [17179572.864000] aic7xxx: Unknown symbol spi2_release_transport Aug 30 13:32:42 srv-lecco-a kernel: [17179572.868000] megaraid cmm: 2.20.2.6 (Release Date: Mon Mar 7 00:01:03 EST 2005) Aug 30 13:32:42 srv-lecco-a kernel: [17179572.872000] megaraid: 2.20.4.8 (Release Date: Mon Apr 11 12:27:22 EST 2006) Aug 30 13:32:42 srv-lecco-a kernel: [17179572.872000] megaraid: probe new device 0x1000:0x0408:0x1028:0x0002: bus 5:slot 14:func 0 Aug 30 13:32:42 srv-lecco-a kernel: [17179572.872000] ACPI: PCI Interrupt 0000:05:0e.0[A] -> GSI 18 (level, low) -> IRQ 185 Aug 30 13:32:42 srv-lecco-a kernel: [17179572.888000] megaraid: fw version:[521X] bios version:[H430] Aug 30 13:32:42 srv-lecco-a kernel: [17179572.888000] scsi2 : LSI Logic MegaRAID driver Aug 30 13:32:42 srv-lecco-a kernel: [17179572.888000] scsi[2]: scanning scsi channel 0 [Phy 0] for non-raid devices Aug 30 13:32:42 srv-lecco-a kernel: [17179573.888000] Vendor: SDR Model: GEM318P Rev: 1 Aug 30 13:32:42 srv-lecco-a kernel: [17179573.888000] Type: Processor ANSI SCSI revision: 02 Aug 30 13:32:42 srv-lecco-a kernel: [17179574.808000] hiddev96: USB HID v1.10 Device [American Power Conversion Smart-UPS 1500 FW:653.13.I USB FW:7.3] on usb-0000:00:1d.1-2 Aug 30 13:32:42 srv-lecco-a kernel: [17179575.892000] scsi[2]: scanning scsi channel 1 [Phy 1] for non-raid devices Aug 30 13:32:42 srv-lecco-a kernel: [17179579.644000] scsi[2]: scanning scsi channel 2 [virtual] for logical drives Aug 30 13:32:42 srv-lecco-a kernel: [17179579.644000] Vendor: MegaRAID Model: LD 0 RAID1 139G Rev: 521X Aug 30 13:32:42 srv-lecco-a kernel: [17179579.644000] Type: Direct-Access ANSI SCSI revision: 02 Aug 30 13:32:42 srv-lecco-a kernel: [17179579.652000] Driver 'sd' needs updating - please use bus_type methods Aug 30 13:32:42 srv-lecco-a kernel: [17179579.652000] SCSI device sda: 286515200 512-byte hdwr sectors (146696 MB) Aug 30 13:32:42 srv-lecco-a kernel: [17179579.652000] sda: asking for cache data failed Aug 30 13:32:42 srv-lecco-a kernel: [17179579.652000] sda: assuming drive cache: write through Aug 30 13:32:42 srv-lecco-a kernel: [17179579.652000] SCSI device sda: 286515200 512-byte hdwr sectors (146696 MB) Aug 30 13:32:42 srv-lecco-a kernel: [17179579.652000] sda: asking for cache data failed Aug 30 13:32:42 srv-lecco-a kernel: [17179579.652000] sda: assuming drive cache: write through Aug 30 13:32:42 srv-lecco-a kernel: [17179579.652000] sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 > Aug 30 13:32:42 srv-lecco-a kernel: [17179579.688000] sd 2:2:0:0: Attached scsi disk sda Aug 30 13:32:42 srv-lecco-a kernel: [17179579.692000] Fusion MPT base driver 3.03.04 Aug 30 13:32:42 srv-lecco-a kernel: [17179579.692000] Copyright (c) 1999-2005 LSI Logic Corporation Aug 30 13:32:42 srv-lecco-a kernel: [17179579.700000] Intel(R) PRO/1000 Network Driver - version 7.0.33-k2 ** Affects: linux-source-2.6.15 (Ubuntu) Importance: Untriaged Status: Unconfirmed -- cannot load aic7xxx module https://launchpad.net/bugs/59163 From thomas at karmann-paf.de Wed Sep 6 11:43:23 2006 From: thomas at karmann-paf.de (Thomas Karmann) Date: Wed, 06 Sep 2006 11:43:23 -0000 Subject: [Bug 58742] Re: [edgy] Important dvb-ttpci modules are missing in edgy! References: <20060903185009.30981.88325.malonedeb@gandwana.ubuntu.com> Message-ID: <20060906114323.29298.42420.malone@gangotri.ubuntu.com> Aha! I had a look at the 2.6.17 kernelsources and possibly found the reason why these modules are not included... It's necessary to enable the (deprecated) "Video for Linux 1" interface in the kernel configuration, then you are able to select the PCI cards. Please do so! -- [edgy] Important dvb-ttpci modules are missing in edgy! https://launchpad.net/bugs/58742 From malcolm.parsons at gmail.com Wed Sep 6 11:48:05 2006 From: malcolm.parsons at gmail.com (Malcolm Parsons) Date: Wed, 06 Sep 2006 11:48:05 -0000 Subject: [Bug 59163] Re: cannot load aic7xxx module References: <20060906111658.29298.79380.malonedeb@gangotri.ubuntu.com> Message-ID: <20060906114805.3977.64169.malone@gandwana.ubuntu.com> Does /lib/modules/2.6.15-26-686/kernel/drivers/scsi/scsi_transport_spi2.ko exist? Does modprobing scsi_transport_spi2 first help? Please attach /lib/modules/2.6.15-26-686/modules.dep Does running "sudo depmod" give any errors? ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Unconfirmed => Needs Info -- cannot load aic7xxx module https://launchpad.net/bugs/59163 From billg at straypackets.com Wed Sep 6 11:45:24 2006 From: billg at straypackets.com (billg) Date: Wed, 06 Sep 2006 11:45:24 -0000 Subject: [Bug 23445] Re: iMac G5 will freeze after booting up References: <20060113142343.21012.90472.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060906114525.3933.59270.malone@gandwana.ubuntu.com> I'm writing this on a 20-inch iMac iSight I bought the week before Apple made the Intel announcement. The stock keyboard and mouse are USB. -- iMac G5 will freeze after booting up https://launchpad.net/bugs/23445 From giuseppe at eppesuigoccas.homedns.org Wed Sep 6 12:13:29 2006 From: giuseppe at eppesuigoccas.homedns.org (Giuseppe Sacco) Date: Wed, 06 Sep 2006 12:13:29 -0000 Subject: [Bug 59163] Re: [Bug 59163] Re: cannot load aic7xxx module References: <20060906111658.29298.79380.malonedeb@gangotri.ubuntu.com> <20060906114805.3977.64169.malone@gandwana.ubuntu.com> Message-ID: <1157544809.11068.29.camel@scarafaggio> Il giorno mer, 06/09/2006 alle 11.48 +0000, Malcolm Parsons ha scritto: > Does > /lib/modules/2.6.15-26-686/kernel/drivers/scsi/scsi_transport_spi2.ko > exist? > > Does modprobing scsi_transport_spi2 first help? nope > Please attach /lib/modules/2.6.15-26-686/modules.dep attached. > Does running "sudo depmod" give any errors? from what user? If I do it from root then I get no message: root at srv-lecco-a:~# sudo depmod root at srv-lecco-a:~# Please note this an ubuntu 5.10 with only kernel and its dependancies from 6.06. depmod is from package module-init-tools 3.2.2-1ubuntu7 (from 6.06). Thanks, Giuseppe -- cannot load aic7xxx module https://launchpad.net/bugs/59163 From sebastian_kapfer at gmx.net Wed Sep 6 12:23:51 2006 From: sebastian_kapfer at gmx.net (Sebastian Kapfer) Date: Wed, 06 Sep 2006 12:23:51 -0000 Subject: [Bug 50275] Re: XFS corruption post-suspend-to-RAM in 2.6.15-25 References: <20060618230713.13137.72847.malonedeb@gandwana.ubuntu.com> Message-ID: <20060906122351.29144.26155.malone@gangotri.ubuntu.com> Sorry but neither Knot-1 nor Knot-2 start on my machine. The CD is fine, I verified MD5 from my hard disk installation. The CD however does not work. Probably something with the graphics (Radeon M7). -- XFS corruption post-suspend-to-RAM in 2.6.15-25 https://launchpad.net/bugs/50275 From malcolm.parsons at gmail.com Wed Sep 6 13:07:34 2006 From: malcolm.parsons at gmail.com (Malcolm Parsons) Date: Wed, 06 Sep 2006 13:07:34 -0000 Subject: [Bug 59163] Re: cannot load aic7xxx module References: <20060906111658.29298.79380.malonedeb@gangotri.ubuntu.com> Message-ID: <20060906130734.29144.5218.malone@gangotri.ubuntu.com> > > Please attach /lib/modules/2.6.15-26-686/modules.dep > > attached. That didn't work. Please use the "Add a comment/attachment" link on https://launchpad.net/bugs/59163 Thanks. -- cannot load aic7xxx module https://launchpad.net/bugs/59163 From giuseppe at eppesuigoccas.homedns.org Wed Sep 6 13:53:10 2006 From: giuseppe at eppesuigoccas.homedns.org (Giuseppe Sacco) Date: Wed, 06 Sep 2006 13:53:10 -0000 Subject: [Bug 59163] Re: cannot load aic7xxx module References: <20060906111658.29298.79380.malonedeb@gangotri.ubuntu.com> Message-ID: <20060906135310.29144.40450.malone@gangotri.ubuntu.com> modules.dep ** Attachment added: "modules.dep" http://librarian.launchpad.net/4154504/modules.dep.gz -- cannot load aic7xxx module https://launchpad.net/bugs/59163 From giuseppe at eppesuigoccas.homedns.org Wed Sep 6 13:54:06 2006 From: giuseppe at eppesuigoccas.homedns.org (Giuseppe Sacco) Date: Wed, 06 Sep 2006 13:54:06 -0000 Subject: [Bug 59163] Re: [Bug 59163] Re: cannot load aic7xxx module References: <20060906111658.29298.79380.malonedeb@gangotri.ubuntu.com> <20060906130734.29144.5218.malone@gangotri.ubuntu.com> Message-ID: <1157550846.11068.31.camel@scarafaggio> Il giorno mer, 06/09/2006 alle 13.07 +0000, Malcolm Parsons ha scritto: > > > Please attach /lib/modules/2.6.15-26-686/modules.dep > > > > attached. > > That didn't work. > > Please use the "Add a comment/attachment" link on > https://launchpad.net/bugs/59163 thanks. I just did it. -- cannot load aic7xxx module https://launchpad.net/bugs/59163 From malcolm.parsons at gmail.com Wed Sep 6 14:14:13 2006 From: malcolm.parsons at gmail.com (Malcolm Parsons) Date: Wed, 06 Sep 2006 14:14:13 -0000 Subject: [Bug 59163] Re: cannot load aic7xxx module References: <20060906111658.29298.79380.malonedeb@gangotri.ubuntu.com> Message-ID: <20060906141414.29298.7840.malone@gangotri.ubuntu.com> There seems to be nothing wrong with modules.dep The module loads ok in linux-image-2.6.15-26-k7. Leaving for someone else to confirm. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Needs Info => Unconfirmed -- cannot load aic7xxx module https://launchpad.net/bugs/59163 From giuseppe at eppesuigoccas.homedns.org Wed Sep 6 14:31:37 2006 From: giuseppe at eppesuigoccas.homedns.org (Giuseppe Sacco) Date: Wed, 06 Sep 2006 14:31:37 -0000 Subject: [Bug 59163] Re: cannot load aic7xxx module References: <20060906111658.29298.79380.malonedeb@gangotri.ubuntu.com> Message-ID: <20060906143137.3977.34284.malone@gandwana.ubuntu.com> I don't know if this is a problem related to the mix breezy/dapper. We found a problem in breezy (see bug #54351) and we decided to try un upgrade to dapper touching only these packages: busybox-initramfs_1.01-4ubuntu3_i386.deb initramfs-tools_0.40ubuntu32_all.deb klibc-utils_1.1.16-1ubuntu5_i386.deb libcairo2_1.0.4-0ubuntu1_i386.deb libfreetype6_2.1.10-1ubuntu2.2_i386.deb libglib2.0-0_2.10.3-0ubuntu1_i386.deb libklibc_1.1.16-1ubuntu5_i386.deb libpango1.0-0_1.12.3-0ubuntu3_i386.deb libpango1.0-common_1.12.3-0ubuntu3_i386.deb linux-image-2.6.15-26-686_2.6.15-26.46_i386.deb lsb-base_3.1-5ubuntu2_all.deb module-init-tools_3.2.2-1ubuntu7_i386.deb nbd-client_2.8.3-2_i386.deb nbd-server_2.8.3-2_i386.deb -- cannot load aic7xxx module https://launchpad.net/bugs/59163 From pekka.jaaskelainen at gmail.com Wed Sep 6 16:02:17 2006 From: pekka.jaaskelainen at gmail.com (=?utf-8?b?UGVra2EgSsOkw6Rza2Vsw6RpbmVu?=) Date: Wed, 06 Sep 2006 16:02:17 -0000 Subject: [Bug 58096] Re: No power down References: <20060829130131.17097.15755.malonedeb@gangotri.ubuntu.com> Message-ID: <20060906160217.29298.67848.launchpad@gangotri.ubuntu.com> *** This bug is a duplicate of bug 43961 *** ** This bug has been marked a duplicate of bug 43961 Power down after shutdown does not work... -- No power down https://launchpad.net/bugs/58096 From pekka.jaaskelainen at gmail.com Wed Sep 6 16:02:17 2006 From: pekka.jaaskelainen at gmail.com (=?utf-8?b?UGVra2EgSsOkw6Rza2Vsw6RpbmVu?=) Date: Wed, 06 Sep 2006 16:02:17 -0000 Subject: [Bug 43961] Re: Power down after shutdown does not work... References: <20060510072310.21520.62027.malonedeb@gandwana.ubuntu.com> Message-ID: <20060906160217.29298.42499.launchpad@gangotri.ubuntu.com> ** Bug 58096 has been marked a duplicate of this bug -- Power down after shutdown does not work... https://launchpad.net/bugs/43961 From m.j.thayer at googlemail.com Wed Sep 6 17:22:27 2006 From: m.j.thayer at googlemail.com (Michael) Date: Wed, 06 Sep 2006 17:22:27 -0000 Subject: [Bug 42398] Re: Dapper kernel 2.6.15-21 K7 and others hang probing CK804 IDE References: <20060501144232.16712.81967.malonedeb@gandwana.ubuntu.com> Message-ID: <20060906172228.29144.45589.malone@gangotri.ubuntu.com> OK, I upgraded my system. Not everything is working yet, but it definitely does not work unless I add pci=nommconf to the kernel command line. So yes, Edgy still has this problem. I suggest that you add this parameter by default for systems that might be affected. -- Dapper kernel 2.6.15-21 K7 and others hang probing CK804 IDE https://launchpad.net/bugs/42398 From dirk.ambrosy at gmx.de Wed Sep 6 19:10:16 2006 From: dirk.ambrosy at gmx.de (DirkAmbrosy) Date: Wed, 06 Sep 2006 19:10:16 -0000 Subject: [Bug 57127] Re: ehci_hcd won't work anymore References: <20060821172818.12543.74763.malonedeb@gangotri.ubuntu.com> Message-ID: <20060906191016.3933.63408.malone@gandwana.ubuntu.com> I did search for solutions for my problems but it seems like there are only persons with the same problem out there and noone with a solution :-( . Best regards, Dirk. -- ehci_hcd won't work anymore https://launchpad.net/bugs/57127 From martin.pitt at ubuntu.com Wed Sep 6 19:46:07 2006 From: martin.pitt at ubuntu.com (Martin Pitt) Date: Wed, 06 Sep 2006 19:46:07 -0000 Subject: [Bug 59233] Re: Kernel vulnerable to local /proc privilege escalation References: <20060906191548.29144.7077.malonedeb@gangotri.ubuntu.com> Message-ID: <20060906194607.3977.70191.malone@gandwana.ubuntu.com> This was fixed almost three months ago in USN-319-1. ** Visibility changed to: Public ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Unconfirmed => Fix Released -- Kernel vulnerable to local /proc privilege escalation https://launchpad.net/bugs/59233 From vodunvibe at yahoo.com Wed Sep 6 20:19:15 2006 From: vodunvibe at yahoo.com (vodunvibe) Date: Wed, 06 Sep 2006 20:19:15 -0000 Subject: [Bug 42132] Re: Logitech Quickcam IM (SPCA5xx) not working [breezy-dapper regression] References: <20060429212405.16712.58583.malonedeb@gandwana.ubuntu.com> Message-ID: <20060906201915.3933.90908.malone@gandwana.ubuntu.com> Subject: [PATCH] spca5xx patch for “No space left on device” error message Related bugs: https://launchpad.net/distros/ubuntu/+source/spca5xx/+bug/34543 https://launchpad.net/distros/ubuntu/+source/linux-source-2.6.15/+bug/42132 https://launchpad.net/distros/ubuntu/+source/linux-source-2.6.15/+bug/38906 Please take a look at the following for more details and fixes: http://ubuntuforums.org/showthread.php?t=247646 Subject: [PATCH] spca5xx patch for “No space left on device” error message This patch Fixes the bandwidth problem that occurs when other USB devices are on the same host controller bus as the camera by gradually lowering the bandwidth requirements of the driver. When the patch is applied, spca5xx drivers works even when other USB devices are present on the same host controller bus as the camera. This patch is currently against the spca5xx-20060501 source. To apply the patch from your current working directory, with a subdirectory called spca5xx-20060501 use: patch -p0 < spca5xx-20060501-vodunvibe-Nospaceleftondevice.patch To apply the patch, in the spca5xx-20060501 directory use: patch -p1 < spca5xx-20060501-vodunvibe-Nospaceleftondevice.patch Bandwidth Problem details: When other USB devices are present on the same host controller bus as the camera, the bandwidth requirements of the spca5xx driver are not being met. The spca5xx driver is asking for more bandwidth than is available which results in the following error messages: No space left on device can't open /dev/video0: No space left on device. usb_submit_urb(0) ret -28 Thanks, vodunvibe diff -urN spca5xx-20060501.orig/drivers/usb/spca5xx.c spca5xx-20060501/drivers/usb/spca5xx.c --- spca5xx-20060501.orig/drivers/usb/spca5xx.c 2006-04-29 11:38:07.000000000 -0400 +++ spca5xx-20060501/drivers/usb/spca5xx.c 2006-09-05 13:19:04.000000000 -0400 @@ -1574,6 +1574,66 @@ spca50x->funct.stopN(spca50x); } + +/********************************************************************** +* spcaReducePacketSize +* Function Fixes the bandwidth problem that occurs +* when other USB devices are on the same host controller bus as the +* camera by gradually lowering the bandwidth requirements of the driver. +* It works even when other USB devices are present on the same +* host controller bus as the camera. +* +* Problem +* When other USB devices are present on the same host controller +* bus as the camera, the bandwidth requirements of the spca5xx driver +* are not being met. The spca5xx driver is asking for more bandwidth +* than is available which results in the following error messages: +* +* No space left on device +* can't open /dev/video0: No space left on device. +* usb_submit_urb(0) ret -28 +* +* +* Many thanks to all the wonderful people contributing to this project. +* +* Great work! +* vodunvibe [AT] NO at SPAM.PLEASE yahoo DOT com +* 2006-08-27 +* +***********************************************************************/ +static int spcaReducePacketSize(struct usb_spca50x *spca50x, int n, int err) +{ + int size=896, fx, i; + err("spcaReducePacketSize: vodunvibe - The usb_submit_urb(%d) transfer request submission failed - You probably have another device sharing the same USB Host Controller Bus as your camera. Try using another USB port, on a different host controller bus.", n); + while (err == -ENOSPC && size >= 0) { + err("spcaReducePacketSize: vodunvibe - Lowering the bandwidth requirements - New packet size (%d) ", size); + spca50x_set_packet_size(spca50x, size); + spca50x->sbuf[n].urb->transfer_buffer_length = spca50x->packet_size * FRAMES_PER_DESC; + for (fx = 0; fx < FRAMES_PER_DESC; fx++) { + spca50x->sbuf[n].urb->iso_frame_desc[fx].offset = spca50x->packet_size * fx; + spca50x->sbuf[n].urb->iso_frame_desc[fx].length = spca50x->packet_size; + } + size-=128; +#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,41) + err = usb_submit_urb(spca50x->sbuf[n].urb, GFP_KERNEL); +#else + err = usb_submit_urb(spca50x->sbuf[n].urb); +#endif + } + + if (!err) { + for (i = 0; i < SPCA50X_NUMSBUF; i++) { + spca50x->sbuf[i].urb->transfer_buffer_length = spca50x->packet_size * FRAMES_PER_DESC; + for (fx = 0; fx < FRAMES_PER_DESC; fx++) { + spca50x->sbuf[i].urb->iso_frame_desc[fx].offset = spca50x->packet_size * fx; + spca50x->sbuf[i].urb->iso_frame_desc[fx].length = spca50x->packet_size; + } + } + } + return err; +} + + static int spca50x_init_isoc(struct usb_spca50x *spca50x) { @@ -1649,7 +1709,15 @@ #endif if (err) { err("init isoc: usb_submit_urb(%d) ret %d", n, err); - return err; + if (err == -ENOSPC) { + err = spcaReducePacketSize(spca50x, n, err); + if (err) { + err("init isoc: After spcaReducePacketSize - usb_submit_urb(%d) ret %d", n, err); + return err; + } + }else{ + return err; + } } } ** Attachment added: "[PATCH] spca5xx patch for “No space left on device” usb_submit_urb(0) ret -28" http://librarian.launchpad.net/4158987/spca5xx-20060501-vodunvibe-Nospaceleftondevice.patch -- Logitech Quickcam IM (SPCA5xx) not working [breezy-dapper regression] https://launchpad.net/bugs/42132 From vodunvibe at yahoo.com Wed Sep 6 20:20:22 2006 From: vodunvibe at yahoo.com (vodunvibe) Date: Wed, 06 Sep 2006 20:20:22 -0000 Subject: [Bug 38906] Re: Driver non-functional in Dapper - AMD K8 kernel, Logitech Communicate STX webcam References: <20060409165246.32313.10314.malonedeb@gandwana.ubuntu.com> Message-ID: <20060906202022.3933.14445.malone@gandwana.ubuntu.com> Subject: [PATCH] spca5xx patch for “No space left on device” error message Related bugs: https://launchpad.net/distros/ubuntu/+source/spca5xx/+bug/34543 https://launchpad.net/distros/ubuntu/+source/linux-source-2.6.15/+bug/42132 https://launchpad.net/distros/ubuntu/+source/linux-source-2.6.15/+bug/38906 Please take a look at the following for more details and fixes: http://ubuntuforums.org/showthread.php?t=247646 Subject: [PATCH] spca5xx patch for “No space left on device” error message This patch Fixes the bandwidth problem that occurs when other USB devices are on the same host controller bus as the camera by gradually lowering the bandwidth requirements of the driver. When the patch is applied, spca5xx drivers works even when other USB devices are present on the same host controller bus as the camera. This patch is currently against the spca5xx-20060501 source. To apply the patch from your current working directory, with a subdirectory called spca5xx-20060501 use: patch -p0 < spca5xx-20060501-vodunvibe-Nospaceleftondevice.patch To apply the patch, in the spca5xx-20060501 directory use: patch -p1 < spca5xx-20060501-vodunvibe-Nospaceleftondevice.patch Bandwidth Problem details: When other USB devices are present on the same host controller bus as the camera, the bandwidth requirements of the spca5xx driver are not being met. The spca5xx driver is asking for more bandwidth than is available which results in the following error messages: No space left on device can't open /dev/video0: No space left on device. usb_submit_urb(0) ret -28 Thanks, vodunvibe diff -urN spca5xx-20060501.orig/drivers/usb/spca5xx.c spca5xx-20060501/drivers/usb/spca5xx.c --- spca5xx-20060501.orig/drivers/usb/spca5xx.c 2006-04-29 11:38:07.000000000 -0400 +++ spca5xx-20060501/drivers/usb/spca5xx.c 2006-09-05 13:19:04.000000000 -0400 @@ -1574,6 +1574,66 @@ spca50x->funct.stopN(spca50x); } + +/********************************************************************** +* spcaReducePacketSize +* Function Fixes the bandwidth problem that occurs +* when other USB devices are on the same host controller bus as the +* camera by gradually lowering the bandwidth requirements of the driver. +* It works even when other USB devices are present on the same +* host controller bus as the camera. +* +* Problem +* When other USB devices are present on the same host controller +* bus as the camera, the bandwidth requirements of the spca5xx driver +* are not being met. The spca5xx driver is asking for more bandwidth +* than is available which results in the following error messages: +* +* No space left on device +* can't open /dev/video0: No space left on device. +* usb_submit_urb(0) ret -28 +* +* +* Many thanks to all the wonderful people contributing to this project. +* +* Great work! +* vodunvibe [AT] NO at SPAM.PLEASE yahoo DOT com +* 2006-08-27 +* +***********************************************************************/ +static int spcaReducePacketSize(struct usb_spca50x *spca50x, int n, int err) +{ + int size=896, fx, i; + err("spcaReducePacketSize: vodunvibe - The usb_submit_urb(%d) transfer request submission failed - You probably have another device sharing the same USB Host Controller Bus as your camera. Try using another USB port, on a different host controller bus.", n); + while (err == -ENOSPC && size >= 0) { + err("spcaReducePacketSize: vodunvibe - Lowering the bandwidth requirements - New packet size (%d) ", size); + spca50x_set_packet_size(spca50x, size); + spca50x->sbuf[n].urb->transfer_buffer_length = spca50x->packet_size * FRAMES_PER_DESC; + for (fx = 0; fx < FRAMES_PER_DESC; fx++) { + spca50x->sbuf[n].urb->iso_frame_desc[fx].offset = spca50x->packet_size * fx; + spca50x->sbuf[n].urb->iso_frame_desc[fx].length = spca50x->packet_size; + } + size-=128; +#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,41) + err = usb_submit_urb(spca50x->sbuf[n].urb, GFP_KERNEL); +#else + err = usb_submit_urb(spca50x->sbuf[n].urb); +#endif + } + + if (!err) { + for (i = 0; i < SPCA50X_NUMSBUF; i++) { + spca50x->sbuf[i].urb->transfer_buffer_length = spca50x->packet_size * FRAMES_PER_DESC; + for (fx = 0; fx < FRAMES_PER_DESC; fx++) { + spca50x->sbuf[i].urb->iso_frame_desc[fx].offset = spca50x->packet_size * fx; + spca50x->sbuf[i].urb->iso_frame_desc[fx].length = spca50x->packet_size; + } + } + } + return err; +} + + static int spca50x_init_isoc(struct usb_spca50x *spca50x) { @@ -1649,7 +1709,15 @@ #endif if (err) { err("init isoc: usb_submit_urb(%d) ret %d", n, err); - return err; + if (err == -ENOSPC) { + err = spcaReducePacketSize(spca50x, n, err); + if (err) { + err("init isoc: After spcaReducePacketSize - usb_submit_urb(%d) ret %d", n, err); + return err; + } + }else{ + return err; + } } } ** Attachment added: "[PATCH] spca5xx patch for “No space left on device” usb_submit_urb(0) ret -28" http://librarian.launchpad.net/4158989/spca5xx-20060501-vodunvibe-Nospaceleftondevice.patch -- Driver non-functional in Dapper - AMD K8 kernel, Logitech Communicate STX webcam https://launchpad.net/bugs/38906 From tas50 at humboldt.edu Wed Sep 6 22:01:58 2006 From: tas50 at humboldt.edu (tas50) Date: Wed, 06 Sep 2006 22:01:58 -0000 Subject: [Bug 58020] Re: [Bug 58020] Re: VIA audio on Sharp PC-AV18 incorrectly loads VIA DXS References: <20060828173021.17097.42638.malonedeb@gangotri.ubuntu.com> <20060830072647.17097.25112.malone@gangotri.ubuntu.com> Message-ID: <49228.137.150.100.54.1157580118.squirrel@137.150.100.54> What commands exactly should I run. I have no clue how to unload modules. -Tim > Please unload snd-via82xx, then reload it with the dxs_support=2 > parameter. If that works, try also the values of 3, 4, and 5. You will > need to unload snd-via82xx after each test. > > -- > VIA audio on Sharp PC-AV18 incorrectly loads VIA DXS > https://launchpad.net/bugs/58020 > -- VIA audio on Sharp PC-AV18 incorrectly loads VIA DXS https://launchpad.net/bugs/58020 From pete at asparagine.net Wed Sep 6 22:38:29 2006 From: pete at asparagine.net (Pete Setchell) Date: Wed, 06 Sep 2006 22:38:29 -0000 Subject: [Bug 59272] Boot locks at black screen with last few amd64 kernels. References: <20060906223830.3977.31760.malonedeb@gandwana.ubuntu.com> Message-ID: <20060906223830.3977.31760.malonedeb@gandwana.ubuntu.com> Public bug reported: Binary package hint: linux-source-2.6.15 Recent upgraded kernels on my system lock at boot time displaying a black screen. This is still happening in Dapper with Ubuntu kernel 2.6.15-26-amd64-generic. The black screen reboots with a ctl-alt-delete, but otherwise I can't get it to do anything with a recent kernel. My system has been upgraded in place since Warty amd64. The problem first happened between 2.6.15-23-amd64-generic and 2.6.15-24-amd64-generic, and my system still boots normally if I select that kernel2.6.15-23-amd64-generic in grub. I seem to remember some warnings about not finding the root device, but I can't duplicate those now. Let me know if there is anything helpful I can do to help diagnose the problem. Obviously my machine is still usable, but it's inconvenient to have to pick out the old kernel version whenever I reboot. Here is the output of sudo dmidecode: # dmidecode 2.7 SMBIOS 2.3 present. 33 structures occupying 969 bytes. Table at 0x000F0000. Handle 0x0000, DMI type 0, 20 bytes. BIOS Information Vendor: Phoenix Technologies, LTD Version: 6.00 PG Release Date: 06/16/2004 Address: 0xE0000 Runtime Size: 128 kB ROM Size: 512 kB Characteristics: PCI is supported PNP is supported APM is supported BIOS is upgradeable BIOS shadowing is allowed Boot from CD is supported Selectable boot is supported BIOS ROM is socketed EDD is supported 5.25"/360 KB floppy services are supported (int 13h) 5.25"/1.2 MB floppy services are supported (int 13h) 3.5"/720 KB floppy services are supported (int 13h) 3.5"/2.88 MB floppy services are supported (int 13h) Print screen service is supported (int 5h) 8042 keyboard services are supported (int 9h) Serial services are supported (int 14h) Printer services are supported (int 17h) CGA/mono video services are supported (int 10h) ACPI is supported USB legacy is supported AGP is supported LS-120 boot is supported ATAPI Zip drive boot is supported BIOS boot specification is supported Handle 0x0001, DMI type 1, 25 bytes. System Information Manufacturer: Product Name: Version: Serial Number: UUID: 00000000-0000-0000-0000-00508D5F1854 Wake-up Type: Power Switch Handle 0x0002, DMI type 2, 8 bytes. Base Board Information Manufacturer: http://www.abit.com.tw/ Product Name: KV8 Pro (VIA K8T800P-8237) Version: 1.x Serial Number: Handle 0x0003, DMI type 3, 17 bytes. Chassis Information Manufacturer: Type: Desktop Lock: Not Present Version: Serial Number: Asset Tag: Boot-up State: Unknown Power Supply State: Unknown Thermal State: Unknown Security Status: Unknown OEM Information: 0x00000000 Handle 0x0004, DMI type 4, 35 bytes. Processor Information Socket Designation: Socket 939 Type: Central Processor Family: Opteron Manufacturer: AMD ID: 48 0F 00 00 FF FB 8B 07 Signature: Extended Family 0, Model 4, Stepping 8 Flags: FPU (Floating-point unit on-chip) VME (Virtual mode extension) DE (Debugging extension) PSE (Page size extension) TSC (Time stamp counter) MSR (Model specific registers) PAE (Physical address extension) MCE (Machine check exception) CX8 (CMPXCHG8 instruction supported) APIC (On-chip APIC hardware supported) SEP (Fast system call) MTRR (Memory type range registers) PGE (Page global enable) MCA (Machine check architecture) CMOV (Conditional move instruction supported) PAT (Page attribute table) PSE-36 (36-bit page size extension) CLFSH (CLFLUSH instruction supported) MMX (MMX technology supported) FXSR (Fast floating-point save and restore) SSE (Streaming SIMD extensions) SSE2 (Streaming SIMD extensions 2) Version: AMD Athlon(tm) 64 Processor 3400+ Voltage: 3.3 V External Clock: 204 MHz Max Speed: 3000 MHz Current Speed: 2244 MHz Status: Populated, Enabled Upgrade: Socket 754 L1 Cache Handle: 0x0008 L2 Cache Handle: 0x0009 L3 Cache Handle: Not Provided Serial Number: Asset Tag: Part Number: Handle 0x0005, DMI type 5, 20 bytes. Memory Controller Information Error Detecting Method: 64-bit ECC Error Correcting Capabilities: Double-bit Error Correcting Supported Interleave: One-way Interleave Current Interleave: Four-way Interleave Maximum Memory Module Size: 2048 MB Maximum Total Memory Size: 4096 MB Supported Speeds: Other Supported Memory Types: DIMM Memory Module Voltage: 3.3 V Associated Memory Slots: 2 0x0006 0x0007 Enabled Error Correcting Capabilities: None Handle 0x0006, DMI type 6, 12 bytes. Memory Module Information Socket Designation: A0 Bank Connections: 0 1 Current Speed: 5 ns Type: DIMM Installed Size: 1024 MB (Double-bank Connection) Enabled Size: 1024 MB (Double-bank Connection) Error Status: OK Handle 0x0007, DMI type 6, 12 bytes. Memory Module Information Socket Designation: A1 Bank Connections: None Current Speed: 5 ns Type: DIMM Installed Size: Not Installed Enabled Size: Not Installed Error Status: OK Handle 0x0008, DMI type 7, 19 bytes. Cache Information Socket Designation: Internal Cache Configuration: Enabled, Not Socketed, Level 1 Operational Mode: Write Back Location: Internal Installed Size: 128 KB Maximum Size: 128 KB Supported SRAM Types: Synchronous Installed SRAM Type: Synchronous Speed: Unknown Error Correction Type: Unknown System Type: Unknown Associativity: Unknown Handle 0x0009, DMI type 7, 19 bytes. Cache Information Socket Designation: External Cache Configuration: Enabled, Not Socketed, Level 2 Operational Mode: Write Back Location: Internal Installed Size: 1024 KB Maximum Size: 1024 KB Supported SRAM Types: Synchronous Installed SRAM Type: Synchronous Speed: Unknown Error Correction Type: Unknown System Type: Unknown Associativity: Unknown Handle 0x000A, DMI type 8, 9 bytes. Port Connector Information Internal Reference Designator: PRIMARY IDE Internal Connector Type: On Board IDE External Reference Designator: Not Specified External Connector Type: None Port Type: Other Handle 0x000B, DMI type 8, 9 bytes. Port Connector Information Internal Reference Designator: SECONDARY IDE Internal Connector Type: On Board IDE External Reference Designator: Not Specified External Connector Type: None Port Type: Other Handle 0x000C, DMI type 8, 9 bytes. Port Connector Information Internal Reference Designator: FDD Internal Connector Type: On Board Floppy External Reference Designator: Not Specified External Connector Type: None Port Type: 8251 FIFO Compatible Handle 0x000D, DMI type 8, 9 bytes. Port Connector Information Internal Reference Designator: COM1 Internal Connector Type: 9 Pin Dual Inline (pin 10 cut) External Reference Designator: External Connector Type: DB-9 male Port Type: Serial Port 16450 Compatible Handle 0x000E, DMI type 8, 9 bytes. Port Connector Information Internal Reference Designator: LPT1 Internal Connector Type: DB-25 female External Reference Designator: External Connector Type: DB-25 female Port Type: Parallel Port ECP/EPP Handle 0x000F, DMI type 8, 9 bytes. Port Connector Information Internal Reference Designator: Keyboard Internal Connector Type: PS/2 External Reference Designator: External Connector Type: PS/2 Port Type: Keyboard Port Handle 0x0010, DMI type 8, 9 bytes. Port Connector Information Internal Reference Designator: PS/2 Mouse Internal Connector Type: PS/2 External Reference Designator: External Connector Type: PS/2 Port Type: Mouse Port Handle 0x0011, DMI type 8, 9 bytes. Port Connector Information Internal Reference Designator: Not Specified Internal Connector Type: None External Reference Designator: USB0 External Connector Type: Other Port Type: USB Handle 0x0012, DMI type 9, 13 bytes. System Slot Information Designation: PCI0 Type: 32-bit PCI Current Usage: Available Length: Long ID: 8 Characteristics: 5.0 V is provided PME signal is supported Handle 0x0013, DMI type 9, 13 bytes. System Slot Information Designation: PCI1 Type: 32-bit PCI Current Usage: Available Length: Long ID: 9 Characteristics: 5.0 V is provided PME signal is supported Handle 0x0014, DMI type 9, 13 bytes. System Slot Information Designation: PCI2 Type: 32-bit PCI Current Usage: Available Length: Long ID: 10 Characteristics: 5.0 V is provided PME signal is supported Handle 0x0015, DMI type 9, 13 bytes. System Slot Information Designation: PCI3 Type: 32-bit PCI Current Usage: In Use Length: Long ID: 11 Characteristics: 5.0 V is provided PME signal is supported Handle 0x0016, DMI type 9, 13 bytes. System Slot Information Designation: PCI4 Type: 32-bit PCI Current Usage: Available Length: Long ID: 12 Characteristics: 5.0 V is provided PME signal is supported Handle 0x0017, DMI type 9, 13 bytes. System Slot Information Designation: AGP Type: 32-bit AGP Current Usage: In Use Length: Long ID: 8 Characteristics: 5.0 V is provided Handle 0x0018, DMI type 13, 22 bytes. BIOS Language Information Installable Languages: 3 n|US|iso8859-1 n|US|iso8859-1 r|CA|iso8859-1 Currently Installed Language: n|US|iso8859-1 Handle 0x0019, DMI type 16, 15 bytes. Physical Memory Array Location: System Board Or Motherboard Use: System Memory Error Correction Type: None Maximum Capacity: 4 GB Error Information Handle: Not Provided Number Of Devices: 2 Handle 0x001A, DMI type 17, 27 bytes. Memory Device Array Handle: 0x0019 Error Information Handle: Not Provided Total Width: Unknown Data Width: Unknown Size: 1024 MB Form Factor: DIMM Set: None Locator: A0 Bank Locator: Bank0/1 Type: Unknown Type Detail: None Speed: Unknown Manufacturer: None Serial Number: None Asset Tag: None Part Number: None Handle 0x001B, DMI type 17, 27 bytes. Memory Device Array Handle: 0x0019 Error Information Handle: Not Provided Total Width: Unknown Data Width: Unknown Size: No Module Installed Form Factor: DIMM Set: None Locator: A1 Bank Locator: Bank2/3 Type: Unknown Type Detail: None Speed: Unknown Manufacturer: None Serial Number: None Asset Tag: None Part Number: None Handle 0x001C, DMI type 19, 15 bytes. Memory Array Mapped Address Starting Address: 0x00000000000 Ending Address: 0x0003FFFFFFF Range Size: 1 GB Physical Array Handle: 0x0019 Partition Width: 0 Handle 0x001D, DMI type 20, 19 bytes. Memory Device Mapped Address Starting Address: 0x00000000000 Ending Address: 0x0003FFFFFFF Range Size: 1 GB Physical Device Handle: 0x001A Memory Array Mapped Address Handle: 0x001C Partition Row Position: 1 Handle 0x001E, DMI type 20, 19 bytes. Memory Device Mapped Address Starting Address: 0x00000000000 Ending Address: 0x000000003FF Range Size: 1 kB Physical Device Handle: 0x001B Memory Array Mapped Address Handle: 0x001C Partition Row Position: 1 Handle 0x001F, DMI type 32, 11 bytes. System Boot Information Status: No errors detected Handle 0x0020, DMI type 127, 4 bytes. End Of Table ** Affects: linux-source-2.6.15 (Ubuntu) Importance: Untriaged Status: Unconfirmed -- Boot locks at black screen with last few amd64 kernels. https://launchpad.net/bugs/59272 From aleixpol at gmail.com Thu Sep 7 01:46:23 2006 From: aleixpol at gmail.com (=?utf-8?q?Aleix_Pol_Gonz=C3=A0lez?=) Date: Thu, 07 Sep 2006 01:46:23 -0000 Subject: [Bug 50342] Re: Fn key not activated on MacBook References: <20060619143130.9114.39650.malonedeb@gandwana.ubuntu.com> Message-ID: <20060907014623.29298.38396.malone@gangotri.ubuntu.com> Same on a spanish keyboard -- Fn key not activated on MacBook https://launchpad.net/bugs/50342 From burner at suppressingfire.org Thu Sep 7 04:13:31 2006 From: burner at suppressingfire.org (Michael R. Head) Date: Thu, 07 Sep 2006 04:13:31 -0000 Subject: [Bug 43961] Re: Power down after shutdown does not work... References: <20060510072310.21520.62027.malonedeb@gandwana.ubuntu.com> Message-ID: <20060907041332.29298.6244.malone@gangotri.ubuntu.com> Just confirming that the -386 kernel was of no help on my Thinkpad T22. It still fails to turn off, but only when the power cable is plugged and/or unplugged while booted. -- Power down after shutdown does not work... https://launchpad.net/bugs/43961 From ianni67 at yahoo.com Thu Sep 7 06:13:04 2006 From: ianni67 at yahoo.com (ianni67) Date: Thu, 07 Sep 2006 06:13:04 -0000 Subject: [Bug 42160] Re: [Dapper] Shut Down won't power off References: <20060430010556.16712.32800.malonedeb@gandwana.ubuntu.com> Message-ID: <20060907061304.29298.92259.malone@gangotri.ubuntu.com> I have the same problem. The point is, that with breezy everything was fine. The problem started with dapper. This means, I think, that it is not a problem of outdated bios. It is a problem with kernel/acpi... -- [Dapper] Shut Down won't power off https://launchpad.net/bugs/42160 From clemens at heesenet.de Thu Sep 7 07:14:34 2006 From: clemens at heesenet.de (Clemens Heese) Date: Thu, 07 Sep 2006 07:14:34 -0000 Subject: [Bug 23445] Re: iMac G5 will freeze after booting up References: <20060113142343.21012.90472.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060907071434.3933.80541.malone@gandwana.ubuntu.com> i got still a black screen but the system boots into gnome corretly. has anyone an idea? wrong graphic output perhaps (the external one)? -- iMac G5 will freeze after booting up https://launchpad.net/bugs/23445 From launchpad at andrepio.com Thu Sep 7 08:32:16 2006 From: launchpad at andrepio.com (Andre) Date: Thu, 07 Sep 2006 08:32:16 -0000 Subject: [Bug 43961] Re: Power down after shutdown does not work... References: <20060510072310.21520.62027.malonedeb@gandwana.ubuntu.com> Message-ID: <20060907083216.3933.13716.malone@gandwana.ubuntu.com> Can someone from the Ubuntu team give some more clarity on the status of this bug? Ben Collins suggested in an earlier post of this bug that we try the Edgy sources to see if it was fixed there. The bug has also been assigned to Linux-kernel-bugs #6431 (But that bug report has had no feedback for 2 months) The problem is that it's not clear from the responses to this bug that someone's actively looking into it for dapper or if they are looking at it, where is it listed actively elsewhere? How can we help? Should we be submitting our log's to an edgy bug or this one? Should we be submitting feedback to Linux-kernel-bugs #6431? Is there any clear feedback to this bug even if it is being worked on elsewhere? This is an absolute show-stopper bug for Dapper servers. You just can't install dapper on a headless server if the server is not capable of rebooting flawlessly. I'd love to help and have posted what I can but I'm not sure if it's helping and I'm not sure what more I can do to help with this horrible bug. -- Power down after shutdown does not work... https://launchpad.net/bugs/43961 From giuseppe at eppesuigoccas.homedns.org Thu Sep 7 10:02:30 2006 From: giuseppe at eppesuigoccas.homedns.org (Giuseppe Sacco) Date: Thu, 07 Sep 2006 10:02:30 -0000 Subject: [Bug 59163] Re: cannot load aic7xxx module References: <20060906111658.29298.79380.malonedeb@gangotri.ubuntu.com> Message-ID: <20060907100230.3933.54113.malone@gandwana.ubuntu.com> It seems I found the problem. when the machine boot, it load the module scsi_transport_spi while aic7xxx require scsi_transport_spi2. If I do # rmmod scsi_transport_spi # modporbe aic7xxx then it woks. -- cannot load aic7xxx module https://launchpad.net/bugs/59163 From malcolm.parsons at gmail.com Thu Sep 7 10:26:29 2006 From: malcolm.parsons at gmail.com (Malcolm Parsons) Date: Thu, 07 Sep 2006 10:26:29 -0000 Subject: [Bug 59163] Re: cannot load aic7xxx module References: <20060906111658.29298.79380.malonedeb@gangotri.ubuntu.com> Message-ID: <20060907102629.3977.39408.malone@gandwana.ubuntu.com> Having scsi_transport_spi.ko loaded prevents scsi_transport_spi2.ko from being loaded. modprobe gives no error, but calling insmod directly says: insmod: error inserting '/lib/modules/2.6.15-26-686/kernel/drivers/scsi/scsi_transport_spi2.ko': -1 File exists Is the length of the filename an issue? ** Changed in: linux-source-2.6.15 (Ubuntu) Assignee: (unassigned) => Ben Collins Status: Unconfirmed => Confirmed -- cannot load aic7xxx module https://launchpad.net/bugs/59163 From fotzlapen at gmail.com Thu Sep 7 11:42:58 2006 From: fotzlapen at gmail.com (Damon) Date: Thu, 07 Sep 2006 11:42:58 -0000 Subject: [Bug 34902] Re: Ralink Wireless USB/PCMCIA/PCI hangs PC References: <20060314143545.30082.52680.malonedeb@gandwana.ubuntu.com> Message-ID: <20060907114258.29298.60493.malone@gangotri.ubuntu.com> Same problem here. I have the DLink DWL-G510 wireless card running on Dapper kernel 2.6.15-26-amd-64. I have tried compiling the rt61 driver from the website and adding the configuration files into /etc/Wireless/RT61STA but whenever I do anything to do with the adapter (ifconfig up or iwconfig ess) the program just churns and my machine becomes unusable. If anyone can find a solution to this it would be really awesome. -- Ralink Wireless USB/PCMCIA/PCI hangs PC https://launchpad.net/bugs/34902 From luis6674 at yahoo.com Thu Sep 7 12:48:29 2006 From: luis6674 at yahoo.com (gneman) Date: Thu, 07 Sep 2006 12:48:29 -0000 Subject: [Bug 59331] Network problem since kernel-2.6.17 References: <20060907122335.15067.63197.malonedeb@gangotri.ubuntu.com> Message-ID: <20060907124829.26353.49354.launchpad@canonical@gandwana.ubuntu.com> Public bug reported: Some changes made in kernel-2.6.17 makes it behave really strange for many users regarding their network connection. It's related to window_scaling and you can find more information here: http://kerneltrap.org/node/6723 The result is that MANY users won't be able to access most sites on the net, including the Ubuntu repositories, unless they disable tcp_window_scaling. This can be done with the command "echo 0 > /proc/sys/net/ipv4/tcp_window_scaling" as root, or by adding the line "net.ipv4.tcp_window_scaling = 0" to /etc/sysctl.conf Ok, here the problem: I'm one of those users (and in Spain there will be a whole lot of them) who can't access most sites. So when with Ubuntu Edgy (as live-cd) it happens that when I try to use that command with sudo I get permission denied. I can edit /etc/sysctl.conf though, but I'd need to reboot the computer which is useless as a live CD. So when I try to install it, it freezes while scanning the mirror to configure apt and stays there forever (because it can't access the repository). Conclusion: I can't use it as live-cd and I can't install it either to solve the problem. Suggestions: 1 - Disable tcp_window_scaling by default in /etc/sysctl.conf. This is the most user-friendly but most technically intrusive one. 2- Allow users to run the command "sudo echo 0 > /proc/sys/net/ipv4/tcp_window_scaling" without getting permission denied. This is not very user friendly, but it should work. 3 - Set some tipe of time-out so that if during install it can't access the repository it will continue with the installation. Then the user can solve the problem after installing the system by adding that line to /etc/sysctl.conf. Not really user-friendly, but it could be a good option. ** Affects: linux-meta (Ubuntu) Importance: Untriaged Status: Unconfirmed -- Network problem since kernel-2.6.17 https://launchpad.net/bugs/59331 From dean at deansas.org Thu Sep 7 12:48:29 2006 From: dean at deansas.org (Dean Sas) Date: Thu, 07 Sep 2006 12:48:29 -0000 Subject: [Bug 59331] Re: Network problem since kernel-2.6.17 References: <20060907122335.15067.63197.malonedeb@gangotri.ubuntu.com> Message-ID: <20060907124829.26353.77202.launchpad@gandwana.ubuntu.com> ** Changed in: Ubuntu Sourcepackagename: None => linux-meta -- Network problem since kernel-2.6.17 https://launchpad.net/bugs/59331 From paul at cravenfamily.com Thu Sep 7 14:14:53 2006 From: paul at cravenfamily.com (Paul Vincent Craven) Date: Thu, 07 Sep 2006 14:14:53 -0000 Subject: [Bug 38263] Re: freeze at startup References: <20060405194706.24486.46138.malonedeb@gangotri.ubuntu.com> Message-ID: <20060907141454.16587.42348.malone@gangotri.ubuntu.com> The Ubuntu 6.06 install CD does the 8254 timer error for me as well. I'm running on an Abit AT8 series motherboard with an AMD64 Athlon. -- freeze at startup https://launchpad.net/bugs/38263 From feenixx at hotmail.com Thu Sep 7 14:19:36 2006 From: feenixx at hotmail.com (mlind) Date: Thu, 07 Sep 2006 14:19:36 -0000 Subject: [Bug 59350] [Edgy] Please Sync ndiswrapper-source 1.23-1 from Debian unstable References: <20060907141936.12796.85334.malonedeb@gandwana.ubuntu.com> Message-ID: <20060907141936.12796.85334.malonedeb@gandwana.ubuntu.com> Public bug reported: (No Ubuntu changes to override.) ndiswrapper (1.23-1) unstable; urgency=low * New upstream release. -- Kel Modderman Sat, 12 Aug 2006 21:11:06 +1000 ndiswrapper (1.22-1) unstable; urgency=low * New upstream release. * Stop carrying trivial patch series, new upstream changes allow this. Details follow. * Disable simple-patchsys cdbs class. * DIST_DESTDIR can be used in place of INST_DIR in rules.modules, and also disables depmod from being run. * The 'version' file has been removed, utils and driver versions are now defined in driver/ndiswrapper.h. Drop path fixup patch and adjust rules sed line to suit. * Remove custom clean: function in rules, there are no upstream debian files now. * Replace $(cdbs_curpkg) with real package name in debian/rules ndiswrapper-utils target. * Make /usr/sbin/ndiswrapper dash friendly. (Closes: #381544) -- Kel Modderman Sun, 6 Aug 2006 01:47:51 +1000 ndiswrapper (1.21-1) unstable; urgency=low [Kel Modderman] * New upstream release. (Closes: #379685) * Add myself to Uploaders. * Bump Standards version to 3.7.2, debhelper compat level to 5. * Build depend on debhelper >=5.0.37 and use the dh_installmodules helper instead of the hand crafted postinst.modules.in (Closes: #377058) * Add NEWS file detailing the status of wpa_supplicant with recent ndiswrapper versions. (Closes: #372125) * Slightly modify the short descriptions for the binary packages. This probably does not go as far as the reporter would like, but its an improvement. (Closes: #364848) * Update the long description of the binary packages with the current blurb from the ndiswrapper homepage. * Add upstream URL to long descriptions of the binary packages. -- Kel Modderman Wed, 26 Jul 2006 21:43:07 +1000 Current Edgy's ndiswrapper-source fails to build kernel module for 2.6.17 series kernels, so sync would be very welcome. Package builds and installs cleanly on minimal Edgy chroot. ** Affects: ndiswrapper (Ubuntu) Importance: Untriaged Status: Unconfirmed -- [Edgy] Please Sync ndiswrapper-source 1.23-1 from Debian unstable https://launchpad.net/bugs/59350 From michael.kofler at gmx.com Thu Sep 7 15:27:39 2006 From: michael.kofler at gmx.com (Michael Kofler) Date: Thu, 07 Sep 2006 15:27:39 -0000 Subject: [Bug 43961] Re: Power down after shutdown does not work... References: <20060510072310.21520.62027.malonedeb@gandwana.ubuntu.com> Message-ID: <20060907152739.16647.18450.malone@gangotri.ubuntu.com> I had the same problem, i.e. after 'will now halt' the computer won't actually halt. The solution for me was acpi=off! Hardware is a PC with ADM Duron 1300, the BIOS from 2001 says it supports ACPI. dmesg says: > dmesg | grep -i acpi [17179569.184000] BIOS-e820: 000000004fff0000 - 000000004fff8000 (ACPI data) [17179569.184000] BIOS-e820: 000000004fff8000 - 0000000050000000 (ACPI NVS) [17179569.184000] ACPI: RSDP (v000 AMI ) @ 0x000fa340 [17179569.184000] ACPI: Unable to map RSDT [ 39.585043] ACPI: Subsystem revision 20051216 [ 39.585049] ACPI: Interpreter disabled. [ 39.585070] pnp: PnP ACPI: disabled I tried acpi=force, then switched to a i386 kernel. Both didn't help. Then I found out that for some reason, the apm kernel module gets always loaded, no matter whether I use ACPI or not. The apm module is even loaded when I start the kernel with the option apm=no and with an additional line 'blacklist apm' in /etc/modprobe.d/blacklist. (Why is this?) De-installing apmd is no option, because ubuntu-desktop depends on it ... (Why?) OK, as I couldn't get rid of APM, I tried to get rid of ACPI. Then I also tried acpi=off, because I thought, apm and acpi might somehow disturb each other. Bingo! For reference: > uname -a Linux mars 2.6.15-26-386 #1 PREEMPT Thu Aug 3 02:52:00 UTC 2006 i686 GNU/Linux It seems to me, that somehow apm and acpi disturb each other. PS: I also tried the apm options power_off=1 and realmode_power_off=1, but these options didn't change anything on my machine. With ACPI (partly) on, they don't help. With ACPI off, they are not needed. -- Power down after shutdown does not work... https://launchpad.net/bugs/43961 From johan at illwinter.com Thu Sep 7 15:45:15 2006 From: johan at illwinter.com (jk) Date: Thu, 07 Sep 2006 15:45:15 -0000 Subject: [Bug 23445] Re: iMac G5 will freeze after booting up References: <20060113142343.21012.90472.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060907154515.16647.89543.malone@gangotri.ubuntu.com> iMac G5 rev C. It boots up nicely but as soon as xwindows starts it is black only. It is possible to log into gnome, but still only black. Fan starts to sound like a vaccum cleaner after a minute or so. -- iMac G5 will freeze after booting up https://launchpad.net/bugs/23445 From johan at illwinter.com Thu Sep 7 15:49:41 2006 From: johan at illwinter.com (jk) Date: Thu, 07 Sep 2006 15:49:41 -0000 Subject: [Bug 23445] Re: iMac G5 will freeze after booting up References: <20060113142343.21012.90472.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060907154941.16587.71276.malone@gangotri.ubuntu.com> I should add that I tested with knot-2. -- iMac G5 will freeze after booting up https://launchpad.net/bugs/23445 From rlancefield at gmail.com Thu Sep 7 16:38:29 2006 From: rlancefield at gmail.com (rlancefield) Date: Thu, 07 Sep 2006 16:38:29 -0000 Subject: [Bug 34902] Re: Ralink Wireless USB/PCMCIA/PCI hangs PC References: <20060314143545.30082.52680.malonedeb@gandwana.ubuntu.com> Message-ID: <20060907163829.12752.58935.malone@gandwana.ubuntu.com> Hi all, Running Dapper 2.6.15-26-386 on an MSI 654 Ultra (MS-6547 v.1) with a Matrox G550. (The mobo BIOS has not been updated since purchase.) I installed an Asus WL-167G USB 2.0 wifi adapter (Ralink RT2500 chipset) which initially worked fine out of the box, using default Dapper drivers. I plugged it in, configured the network settings, and it connected to my router without problems. It ran flawlessly for several weeks until I decided to use the the System > Administration > Networking tool to change the configuration from static addressing to DHCP. I made the change, clicked OK and the system locked up, solidly. As others have reported above, all I could do was hard reboot. I disabled the interface and tried to re-enable it, but doing so froze the system (as did each subsequent attempt). The solution (for me) turned out to be very simple. In /etc/network/interfaces I added the statement "auto rausb0" immediately above the section for my wireless interface. So, the wlan section in my interfaces file now looks like: auto rausb0 iface rausb0 inet static (... etc.) After rebooting, the command did its job and auto-started the interface. So far so good. Seems to be working fine and is a simple and benign fix. Hope this proves to be helpful to someone. -- Ralink Wireless USB/PCMCIA/PCI hangs PC https://launchpad.net/bugs/34902 From fargher at gmail.com Thu Sep 7 17:04:51 2006 From: fargher at gmail.com (Rob Fargher) Date: Thu, 07 Sep 2006 17:04:51 -0000 Subject: [Bug 56823] Re: via82cxxx disables DMA on Asrock 775Dual-VSTA References: <20060818162201.12488.49756.malonedeb@gangotri.ubuntu.com> Message-ID: <20060907170451.16587.16320.malone@gangotri.ubuntu.com> DMA is still disabled in Edgy Knot 2. -- via82cxxx disables DMA on Asrock 775Dual-VSTA https://launchpad.net/bugs/56823 From rlancefield at gmail.com Thu Sep 7 17:55:19 2006 From: rlancefield at gmail.com (rlancefield) Date: Thu, 07 Sep 2006 17:55:19 -0000 Subject: [Bug 34902] Re: Ralink Wireless USB/PCMCIA/PCI hangs PC References: <20060314143545.30082.52680.malonedeb@gandwana.ubuntu.com> Message-ID: <20060907175519.16587.18680.malone@gangotri.ubuntu.com> Just re-read my post above and realised that I called my solution a 'fix'. That's incorrect, it's merely a workaround as the original problem with the system freezing after configuration changes using the Gnome Networking tool persists on the machine. However, manually editing 'interfaces' has enabled me to regain connectivity. -- Ralink Wireless USB/PCMCIA/PCI hangs PC https://launchpad.net/bugs/34902 From martin.pitt at ubuntu.com Thu Sep 7 18:17:39 2006 From: martin.pitt at ubuntu.com (Martin Pitt) Date: Thu, 07 Sep 2006 18:17:39 -0000 Subject: [Bug 19390] Re: sometimes mounts both raw device and partition References: <20060113140129.21012.38508.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060907181739.16647.28256.malone@gangotri.ubuntu.com> It's now fixed upstream, should be fixable for edgy. ** Changed in: hal (Ubuntu) Status: Confirmed => In Progress -- sometimes mounts both raw device and partition https://launchpad.net/bugs/19390 From brian_bannister at yahoo.com Thu Sep 7 19:14:28 2006 From: brian_bannister at yahoo.com (brian Bannister) Date: Thu, 07 Sep 2006 19:14:28 -0000 Subject: [Bug 34902] Re: Ralink Wireless USB/PCMCIA/PCI hangs PC References: <20060314143545.30082.52680.malonedeb@gandwana.ubuntu.com> Message-ID: <20060907191428.12752.99148.malone@gandwana.ubuntu.com> I have similar feedback to rlancefield. I'm using an up to date dapper install with kernel 2.6.15-26-686 and an asus wl-167g usb 80211b/g adapter which uses the ralink rt2570 chip I think. If I configure and activate my wl-167g manually using /etc/network/interfaces and calling 'ifup rausb0' or setting it to autostart everything now works. If I configure and activate the adaptor using the Gnome networking tool I get a complete system freeze as soon as I activate. This freeze always happens if I manually specify an IP address using the networking tool, and only sometimes happens (maybe never) if I set it up to use DHCP. Here's the lines that make it work in my /etc/network/interfaces script: auto rausb0 iface rausb0 inet static address 192.168.12.30 netmask 255.255.255.0 gateway 192.168.12.1 wireless-essid adf3fd wireless-key 11112222333344445555666677 -- Ralink Wireless USB/PCMCIA/PCI hangs PC https://launchpad.net/bugs/34902 From nicolas.ternisien at gmail.com Thu Sep 7 23:20:39 2006 From: nicolas.ternisien at gmail.com (Nicolas Ternisien) Date: Thu, 07 Sep 2006 23:20:39 -0000 Subject: [Bug 59432] Broadcom 4318 driver with ndiswrapper do not work anymore References: <20060907232039.12752.11781.malonedeb@gandwana.ubuntu.com> Message-ID: <20060907232039.12752.11781.malonedeb@gandwana.ubuntu.com> Public bug reported: I was using 2 weeks ago a Dapper Drake release of Ubuntu, and I've just switched to the Edgy Eft version. It seems that the ndiswrapper version has a problem, because it allows NetworkManager to display existing Wireless Access Points, but connecting to them is now impossible. It stay at the second step : Device Setup (or Configuration, I do not know the right term because I'm using a french version of it). The message output is : Sep 8 01:12:04 localhost NetworkManager: ^IUpdating allowed wireless network lists. Sep 8 01:12:04 localhost NetworkManager: ^I nm_dbus_get_network_data_cb (): nm_dbus_get_network_data_cb(): dbus returned an error. (org.freedesktop.NetworkManagerInfo.NoSecurity) org.freedesktop.NetworkManagerInfo.NoSecurity Sep 8 01:12:04 localhost last message repeated 3 times Sep 8 01:12:07 localhost NetworkManager: ^I[1157670727.739425] nm_device_802_11_wireless_get_activation_ap (): Forcing AP 'Lastnico' Sep 8 01:12:07 localhost NetworkManager: ^IUser Switch: /org/freedesktop/NetworkManager/Devices/eth0 / Lastnico Sep 8 01:12:07 localhost NetworkManager: ^IDeactivating device eth0. Sep 8 01:12:09 localhost gconfd (nicolas-5288): démarrage (version 2.14.0), pid 5288 utilisateur « nicolas » Sep 8 01:12:09 localhost gconfd (nicolas-5288): Adresse « xml:readonly:/etc/gconf/gconf.xml.mandatory » résolue vers une source de configuration en lecture seule à la position 0 Sep 8 01:12:09 localhost gconfd (nicolas-5288): Adresse « xml:readwrite:/home/nicolas/.gconf » résolue vers une source de configuration accessible en écriture à la position 1 Sep 8 01:12:09 localhost gconfd (nicolas-5288): Adresse « xml:readonly:/etc/gconf/gconf.xml.defaults » résolue vers une source de configuration en lecture seule à la position 2 Sep 8 01:12:09 localhost gconfd (nicolas-5288): Adresse « xml:readonly:/var/lib/gconf/debian.defaults » résolue vers une source de configuration en lecture seule à la position 3 Sep 8 01:12:09 localhost gconfd (nicolas-5288): Adresse « xml:readonly:/var/lib/gconf/defaults » résolue vers une source de configuration en lecture seule à la position 4 Sep 8 01:12:09 localhost dhcdbd: message_handler: message handler not found under /com/redhat/dhcp/eth0 for sub-path eth0.dbus.get.reason Sep 8 01:12:09 localhost NetworkManager: ^IDevice eth0 activation scheduled... Sep 8 01:12:09 localhost NetworkManager: ^IActivation (eth0) started... Sep 8 01:12:09 localhost NetworkManager: ^IActivation (eth0) Stage 1 of 5 (Device Prepare) scheduled... Sep 8 01:12:10 localhost NetworkManager: ^IOld device 'eth0' activating, won't change. Sep 8 01:12:10 localhost NetworkManager: ^IActivation (eth0) Stage 1 of 5 (Device Prepare) started... Sep 8 01:12:10 localhost NetworkManager: ^IActivation (eth0) Stage 2 of 5 (Device Configure) scheduled... Sep 8 01:12:10 localhost NetworkManager: ^IActivation (eth0) Stage 1 of 5 (Device Prepare) complete. Sep 8 01:12:10 localhost NetworkManager: ^IActivation (eth0) Stage 2 of 5 (Device Configure) starting... Sep 8 01:12:10 localhost NetworkManager: ^IActivation (eth0/wireless): access point 'Lastnico' is encrypted, but NO valid key exists. New key needed. Sep 8 01:12:10 localhost NetworkManager: ^IActivation (eth0) New wireless user key requested for network 'Lastnico'. Sep 8 01:12:10 localhost NetworkManager: ^IActivation (eth0) Stage 2 of 5 (Device Configure) complete. Sep 8 01:13:00 localhost NetworkManager: ^IActivation (eth0) New wireless user key for network 'Lastnico' received. Sep 8 01:13:00 localhost NetworkManager: ^IActivation (eth0) Stage 1 of 5 (Device Prepare) scheduled... Sep 8 01:13:00 localhost NetworkManager: ^IActivation (eth0) Stage 1 of 5 (Device Prepare) started... Sep 8 01:13:00 localhost NetworkManager: ^IActivation (eth0) Stage 2 of 5 (Device Configure) scheduled... Sep 8 01:13:00 localhost NetworkManager: ^IActivation (eth0) Stage 1 of 5 (Device Prepare) complete. Sep 8 01:13:00 localhost NetworkManager: ^IActivation (eth0) Stage 2 of 5 (Device Configure) starting... Sep 8 01:13:00 localhost NetworkManager: ^IActivation (eth0/wireless): access point 'Lastnico' is encrypted, and a key exists. No new key needed. Sep 8 01:13:01 localhost NetworkManager: ^ISUP: sending command 'INTERFACE_ADD eth0^I^Indiswrapper^I/var/run/wpa_supplicant^I' Sep 8 01:13:02 localhost NetworkManager: ^ISUP: response was 'OK' Sep 8 01:13:02 localhost NetworkManager: ^ISUP: sending command 'AP_SCAN 1' Sep 8 01:13:02 localhost NetworkManager: ^ISUP: response was 'OK' Sep 8 01:13:02 localhost NetworkManager: ^ISUP: sending command 'ADD_NETWORK' Sep 8 01:13:02 localhost NetworkManager: ^ISUP: response was '0' Sep 8 01:13:02 localhost NetworkManager: ^ISUP: sending command 'SET_NETWORK 0 ssid 4c6173746e69636f' Sep 8 01:13:02 localhost NetworkManager: ^ISUP: response was 'OK' Sep 8 01:13:02 localhost NetworkManager: ^ISUP: sending command 'SET_NETWORK 0 key_mgmt NONE' Sep 8 01:13:02 localhost NetworkManager: ^ISUP: response was 'OK' Sep 8 01:13:02 localhost NetworkManager: ^ISUP: sending command 'SET_NETWORK 0 wep_key0 ' Sep 8 01:13:02 localhost NetworkManager: ^ISUP: response was 'OK' Sep 8 01:13:02 localhost NetworkManager: ^ISUP: sending command 'SET_NETWORK 0 wep_tx_keyidx 0' Sep 8 01:13:02 localhost NetworkManager: ^ISUP: response was 'OK' Sep 8 01:13:02 localhost NetworkManager: ^ISUP: sending command 'ENABLE_NETWORK 0' Sep 8 01:13:02 localhost NetworkManager: ^ISUP: response was 'OK' Sep 8 01:13:02 localhost NetworkManager: ^IActivation (eth0) Stage 2 of 5 (Device Configure) complete. Sep 8 01:13:07 localhost NetworkManager: ^Iwpa_supplicant(5365): Global control interface '/var/run/wpa_supplicant-global' Sep 8 01:13:07 localhost NetworkManager: ^Iwpa_supplicant(5365): RX global ctrl_iface - hexdump_ascii(len=56): Sep 8 01:13:07 localhost NetworkManager: ^Iwpa_supplicant(5365): 49 4e 54 45 52 46 41 43 45 5f 41 44 44 20 65 74 INTERFACE_ADD et Sep 8 01:13:07 localhost NetworkManager: ^Iwpa_supplicant(5365): 68 30 09 09 6e 64 69 73 77 72 61 70 70 65 72 09 h0__ndiswrapper_ Sep 8 01:13:07 localhost NetworkManager: ^Iwpa_supplicant(5365): 2f 76 61 72 2f 72 75 6e 2f 77 70 61 5f 73 75 70 /var/run/wpa_sup Sep 8 01:13:07 localhost NetworkManager: ^Iwpa_supplicant(5365): 70 6c 69 63 61 6e 74 09 plicant_ Sep 8 01:13:07 localhost NetworkManager: ^Iwpa_supplicant(5365): CTRL_IFACE GLOBAL INTERFACE_ADD 'eth0^I^Indiswrapper^I/var/run/wpa_supplicant^I' Sep 8 01:13:07 localhost NetworkManager: ^Iwpa_supplicant(5365): Initializing interface 'eth0' conf 'N/A' driver 'ndiswrapper' ctrl_interface '/var/run/wpa_supplicant' bridge 'N/A' Sep 8 01:13:07 localhost NetworkManager: ^Iwpa_supplicant(5365): Initializing interface (2) 'eth0' Sep 8 01:13:07 localhost NetworkManager: ^Iwpa_supplicant(5365): EAPOL: SUPP_PAE entering state DISCONNECTED Sep 8 01:13:07 localhost NetworkManager: ^Iwpa_supplicant(5365): EAPOL: KEY_RX entering state NO_KEY_RECEIVE Sep 8 01:13:07 localhost NetworkManager: ^Iwpa_supplicant(5365): EAPOL: SUPP_BE entering state INITIALIZE Sep 8 01:13:07 localhost NetworkManager: ^Iwpa_supplicant(5365): EAP: EAP entering state DISABLED Sep 8 01:13:07 localhost NetworkManager: ^Iwpa_supplicant(5365): EAPOL: External notification - portEnabled=0 Sep 8 01:13:07 localhost NetworkManager: ^Iwpa_supplicant(5365): EAPOL: External notification - portValid=0 Sep 8 01:13:07 localhost NetworkManager: ^Iwpa_supplicant(5365): SIOCGIWRANGE: WE(compiled)=20 WE(source)=18 enc_capa=0xf Sep 8 01:13:07 localhost NetworkManager: ^Iwpa_supplicant(5365): capabilities: key_mgmt 0xf enc 0xf Sep 8 01:13:07 localhost NetworkManager: ^Iwpa_supplicant(5365): WEXT: Operstate: linkmode=1, operstate=5 Sep 8 01:13:07 localhost NetworkManager: ^Iwpa_supplicant(5365): :17:31:f5:8d:04 Sep 8 01:13:07 localhost NetworkManager: ^Iwpa_supplicant(5365): Driver does not support WPA. Sep 8 01:13:07 localhost NetworkManager: ^Iwpa_supplicant(5365): wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0 Sep 8 01:13:07 localhost NetworkManager: ^Iwpa_supplicant(5365): wpa_driver_wext_set_key: alg=0 key_idx=1 set_tx=0 seq_len=0 key_len=0 Sep 8 01:13:07 localhost NetworkManager: ^Iwpa_supplicant(5365): wpa_driver_wext_set_key: alg=0 key_idx=2 set_tx=0 seq_len=0 key_len=0 Sep 8 01:13:07 localhost NetworkManager: ^Iwpa_supplicant(5365): wpa_driver_wext_set_key: alg=0 key_idx=3 set_tx=0 seq_len=0 key_len=0 Sep 8 01:13:07 localhost NetworkManager: ^Iwpa_supplicant(5365): Setting scan request: 0 sec 100000 usec Sep 8 01:13:07 localhost NetworkManager: ^Iwpa_supplicant(5365): Added interface eth0 Sep 8 01:13:07 localhost NetworkManager: ^Iwpa_supplicant(5365): Wireless event: cmd=0x8b06 len=8 Sep 8 01:13:07 localhost NetworkManager: ^Iwpa_supplicant(5365): RX ctrl_iface - hexdump_ascii(len=9): Sep 8 01:13:07 localhost NetworkManager: ^Iwpa_supplicant(5365): 41 50 5f 53 43 41 4e 20 31 AP_SCAN 1 Sep 8 01:13:07 localhost NetworkManager: ^Iwpa_supplicant(5365): RX ctrl_iface - hexdump_ascii(len=11): Sep 8 01:13:07 localhost NetworkManager: ^Iwpa_supplicant(5365): 41 44 44 5f 4e 45 54 57 4f 52 4b ADD_NETWORK Sep 8 01:13:07 localhost NetworkManager: ^Iwpa_supplicant(5365): CTRL_IFACE: ADD_NETWORK Sep 8 01:13:07 localhost NetworkManager: ^Iwpa_supplicant(5365): RX ctrl_iface - hexdump_ascii(len=35): [REMOVED] Sep 8 01:13:07 localhost NetworkManager: ^Iwpa_supplicant(5365): CTRL_IFACE: SET_NETWORK id=0 name='ssid' Sep 8 01:13:07 localhost NetworkManager: ^Iwpa_supplicant(5365): CTRL_IFACE: value - hexdump_ascii(len=16): [REMOVED] Sep 8 01:13:07 localhost NetworkManager: ^Iwpa_supplicant(5365): ssid - hexdump_ascii(len=8): Sep 8 01:13:07 localhost NetworkManager: ^Iwpa_supplicant(5365): 4c 61 73 74 6e 69 63 6f Lastnico Sep 8 01:13:07 localhost NetworkManager: ^Iwpa_supplicant(5365): RX ctrl_iface - hexdump_ascii(len=27): [REMOVED] Sep 8 01:13:07 localhost NetworkManager: ^Iwpa_supplicant(5365): CTRL_IFACE: SET_NETWORK id=0 name='key_mgmt' Sep 8 01:13:07 localhost NetworkManager: ^Iwpa_supplicant(5365): exdump_ascii(len=4): [REMOVED] Sep 8 01:13:07 localhost NetworkManager: ^Iwpa_supplicant(5365): key_mgmt: 0x4 Sep 8 01:13:07 localhost NetworkManager: ^Iwpa_supplicant(5365): RX ctrl_iface - hexdump_ascii(len=49): [REMOVED] Sep 8 01:13:07 localhost NetworkManager: ^Iwpa_supplicant(5365): CTRL_IFACE: SET_NETWORK id=0 name='wep_key0' Sep 8 01:13:07 localhost NetworkManager: ^Iwpa_supplicant(5365): CTRL_IFACE: value - hexdump_ascii(len=26): [REMOVED] Sep 8 01:13:07 localhost NetworkManager: ^Iwpa_supplicant(5365): wep_key0 - hexdump(len=13): [REMOVED] Sep 8 01:13:07 localhost NetworkManager: ^Iwpa_supplicant(5365): RX ctrl_iface - hexdump_ascii(len=29): [REMOVED] Sep 8 01:13:07 localhost NetworkManager: ^Iwpa_supplicant(5365): CTRL_IFACE: SET_NETWORK id=0 name='wep_tx_keyidx' Sep 8 01:13:07 localhost NetworkManager: ^Iwpa_supplicant(5365): CTRL_IFACE: value - hexdump_ascii(len=1): [REMOVED] Sep 8 01:13:07 localhost NetworkManager: ^Iwpa_supplicant(5365): wep_tx_keyidx=0 (0x0) Sep 8 01:13:07 localhost NetworkManager: ^Iwpa_supplicant(5365): RX ctrl_iface - hexdump_ascii(len=16): Sep 8 01:13:07 localhost NetworkManager: ^Iwpa_supplicant(5365): 45 4e 41 42 4c 45 5f 4e 45 54 57 4f 52 4b 20 30 ENABLE_NETWORK 0 Sep 8 01:13:07 localhost NetworkManager: ^Iwpa_supplicant(5365): CTRL_IFACE: ENABLE_NETWORK id=0 Sep 8 01:13:07 localhost NetworkManager: ^Iwpa_supplicant(5365): Setting scan request: 0 sec 0 usec Sep 8 01:13:07 localhost NetworkManager: ^Iwpa_supplicant(5365): State: DISCONNECTED -> SCANNING Sep 8 01:13:07 localhost NetworkManager: ^Iwpa_supplicant(5365): Starting AP scan (broadcast SSID) Sep 8 01:13:07 localhost NetworkManager: ^Iwpa_supplicant(5365): Trying to get current scan results first without requesting a new scan to speed up initial association Sep 8 01:13:07 localhost NetworkManager: ^Iwpa_supplicant(5365): Received 492 bytes of scan results (2 BSSes) Sep 8 01:13:07 localhost NetworkManager: ^Iwpa_supplicant(5365): Scan results: 2 Sep 8 01:13:07 localhost NetworkManager: ^Iwpa_supplicant(5365): Selecting BSS from priority group 0 Sep 8 01:13:07 localhost NetworkManager: ^Iwpa_supplicant(5365): 0: ca:66:24:0d:8a:14 ssid='reseau_freebox' wpa_ie_len=28 rsn_ie_len=0 caps=0x11 Sep 8 01:13:07 localhost NetworkManager: ^Iwpa_supplicant(5365): skip - SSID mismatch Sep 8 01:13:07 localhost NetworkManager: ^Iwpa_supplicant(5365): Sep 8 01:13:07 localhost NetworkManager: ^Iwpa_supplicant(5365): skip - no WPA/RSN IE Sep 8 01:13:07 localhost NetworkManager: ^Iwpa_supplicant(5365): selected non-WPA AP 0e:af:fb:79:13:b8 ssid='Lastnico' Sep 8 01:13:07 localhost NetworkManager: ^Iwpa_supplicant(5365): Trying to associate with 0e:af:fb:79:13:b8 (SSID='Lastnico' freq=2462 MHz) Sep 8 01:13:07 localhost NetworkManager: ^Iwpa_supplicant(5365): Cancelling scan request Sep 8 01:13:07 localhost NetworkManager: ^Iwpa_supplicant(5365): WPA: clearing own WPA/RSN IE Sep 8 01:13:07 localhost NetworkManager: ^Iwpa_supplicant(5365): Automatic auth_alg selection: 0x1 Sep 8 01:13:07 localhost NetworkManager: ^Iwpa_supplicant(5365): WPA: clearing AP WPA IE Sep 8 01:13:07 localhost NetworkManager: ^Iwpa_supplicant(5365): WPA: clearing AP RSN IE Sep 8 01:13:07 localhost NetworkManager: ^Iwpa_supplicant(5365): WPA: clearing own WPA/RSN IE Sep 8 01:13:07 localhost NetworkManager: ^Iwpa_supplicant(5365): No keys have been configured - skip key clearing Sep 8 01:13:07 localhost NetworkManager: ^Iwpa_supplicant(5365): State: SCANNING -> ASSOCIATING Sep 8 01:13:07 localhost NetworkManager: ^Iwpa_supplicant(5365): WEXT: Operstate: linkmode=-1, operstate=5 Sep 8 01:13:07 localhost NetworkManager: ^Iwpa_supplicant(5365): Association request to the driver failed Sep 8 01:13:07 localhost NetworkManager: ^Iwpa_supplicant(5365): Setting authentication timeout: 5 sec 0 usec Sep 8 01:13:07 localhost NetworkManager: ^Iwpa_supplicant(5365): EAPOL: External notification - portControl=ForceAuthorized Sep 8 01:13:07 localhost NetworkManager: ^Iwpa_supplicant(5365): CTRL_IFACE monitor attached - hexdump(len=40): 2f 76 61 72 2f 72 75 6e 2f 4e 65 74 77 6f 72 6b 4d 61 6e 61 67 65 72 2f 77 70 61 5f 63 74 72 6c 5f 34 35 30 37 2d 31 00 Sep 8 01:13:07 localhost NetworkManager: ^Iwpa_supplicant(5365): Authentication with 00:00:00:00:00:00 timed out. Sep 8 01:13:07 localhost NetworkManager: ^Iwpa_supplicant(5365): CTRL_IFACE monitor send - hexdump(len=40): 2f 76 61 72 2f 72 75 6e 2f 4e 65 74 77 6f 72 6b 4d 61 6e 61 67 65 72 2f 77 70 61 5f 63 74 72 6c 5f 34 35 30 37 2d 31 00 Sep 8 01:13:07 localhost NetworkManager: ^Iwpa_supplicant(5365): Added BSSID 0e:af:fb:79:13:b8 into blacklist Sep 8 01:13:18 localhost NetworkManager: ^Iwpa_supplicant(5365): CIATING -> DISCONNECTED Sep 8 01:13:18 localhost NetworkManager: ^Iwpa_supplicant(5365): WEXT: Operstate: linkmode=-1, operstate=5 Sep 8 01:13:18 localhost NetworkManager: ^Iwpa_supplicant(5365): wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0 Sep 8 01:13:18 localhost NetworkManager: ^Iwpa_supplicant(5365): wpa_driver_wext_set_key: alg=0 key_idx=1 set_tx=0 seq_len=0 key_len=0 Sep 8 01:13:18 localhost NetworkManager: ^Iwpa_supplicant(5365): wpa_driver_wext_set_key: alg=0 key_idx=2 set_tx=0 seq_len=0 key_len=0 Sep 8 01:13:18 localhost NetworkManager: ^Iwpa_supplicant(5365): wpa_driver_wext_set_key: alg=0 key_idx=3 set_tx=0 seq_len=0 key_len=0 Sep 8 01:13:18 localhost NetworkManager: ^Iwpa_supplicant(5365): EAPOL: External notification - portEnabled=0 Sep 8 01:13:18 localhost NetworkManager: ^Iwpa_supplicant(5365): EAPOL: External notification - portValid=0 Sep 8 01:13:18 localhost NetworkManager: ^Iwpa_supplicant(5365): Setting scan request: 0 sec 0 usec Sep 8 01:13:18 localhost NetworkManager: ^Iwpa_supplicant(5365): State: DISCONNECTED -> SCANNING Sep 8 01:13:18 localhost NetworkManager: ^Iwpa_supplicant(5365): Starting AP scan (broadcast SSID) Sep 8 01:13:18 localhost NetworkManager: ^Iwpa_supplicant(5365): Scan timeout - try to get results Sep 8 01:13:18 localhost NetworkManager: ^Iwpa_supplicant(5365): Received 492 bytes of scan results (2 BSSes) Sep 8 01:13:18 localhost NetworkManager: ^Iwpa_supplicant(5365): Scan results: 2 Sep 8 01:13:18 localhost NetworkManager: ^Iwpa_supplicant(5365): Selecting BSS from priority group 0 Sep 8 01:13:18 localhost NetworkManager: ^Iwpa_supplicant(5365): 0: ca:66:24:0d:8a:14 ssid='reseau_freebox' wpa_ie_len=28 rsn_ie_len=0 caps=0x11 Sep 8 01:13:18 localhost NetworkManager: ^Iwpa_supplicant(5365): skip - SSID mismatch Sep 8 01:13:18 localhost NetworkManager: ^Iwpa_supplicant(5365): 1: 0e:af:fb:79:13:b8 ssid='Lastnico' wpa_ie_len=0 rsn_ie_len=0 caps=0x11 Sep 8 01:13:18 localhost NetworkManager: ^Iwpa_supplicant(5365): skip - no WPA/RSN IE Sep 8 01:13:18 localhost NetworkManager: ^Iwpa_supplicant(5365): selected non-WPA AP 0e:af:fb:79:13:b8 ssid='Lastnico' Sep 8 01:13:18 localhost NetworkManager: ^Iwpa_supplicant(5365): Trying to associate with 0e:af:fb:79:13:b8 (SSID='Lastnico' freq=2462 MHz) Sep 8 01:13:18 localhost NetworkManager: ^Iwpa_supplicant(5365): - hexdump(len=40): 2f 76 61 72 2f 72 75 6e 2f 4e 65 74 77 6f 72 6b 4d 61 6e 61 67 65 72 2f 77 70 61 5f 63 74 72 6c 5f 34 35 30 37 2d 31 00 Sep 8 01:13:18 localhost NetworkManager: ^Iwpa_supplicant(5365): Cancelling scan request Sep 8 01:13:18 localhost NetworkManager: ^Iwpa_supplicant(5365): WPA: clearing own WPA/RSN IE Sep 8 01:13:18 localhost NetworkManager: ^Iwpa_supplicant(5365): Automatic auth_alg selection: 0x1 Sep 8 01:13:18 localhost NetworkManager: ^Iwpa_supplicant(5365): WPA: clearing AP WPA IE Sep 8 01:13:18 localhost NetworkManager: ^Iwpa_supplicant(5365): WPA: clearing AP RSN IE Sep 8 01:13:18 localhost NetworkManager: ^Iwpa_supplicant(5365): WPA: clearing own WPA/RSN IE Sep 8 01:13:18 localhost NetworkManager: ^Iwpa_supplicant(5365): No keys have been configured - skip key clearing Sep 8 01:13:18 localhost NetworkManager: ^Iwpa_supplicant(5365): State: SCANNING -> ASSOCIATING Sep 8 01:13:18 localhost NetworkManager: ^Iwpa_supplicant(5365): WEXT: Operstate: linkmode=-1, operstate=5 Sep 8 01:13:18 localhost NetworkManager: ^Iwpa_supplicant(5365): Association request to the driver failed Sep 8 01:13:18 localhost NetworkManager: ^Iwpa_supplicant(5365): CTRL_IFACE monitor send - hexdump(len=40): 2f 76 61 72 2f 72 75 6e 2f 4e 65 74 77 6f 72 6b 4d 61 6e 61 67 65 72 2f 77 70 61 5f 63 74 72 6c 5f 34 35 30 37 2d 31 00 Sep 8 01:13:18 localhost NetworkManager: ^Iwpa_supplicant(5365): Setting authentication timeout: 5 sec 0 usec Sep 8 01:13:18 localhost NetworkManager: ^Iwpa_supplicant(5365): EAPOL: External notification - portControl=ForceAuthorized Sep 8 01:13:18 localhost NetworkManager: ^Iwpa_supplicant(5365): Authentication with 00:00:00:00:00:00 timed out. Sep 8 01:13:18 localhost NetworkManager: ^Iwpa_supplicant(5365): CTRL_IFACE monitor send - hexdump(len=40): 2f 76 61 72 2f 72 75 6e 2f 4e 65 74 77 6f 72 6b 4d 61 6e 61 67 65 72 2f 77 70 61 5f 63 74 72 6c 5f 34 35 30 37 2d 31 00 Sep 8 01:13:18 localhost NetworkManager: ^Iwpa_supplicant(5365): BSSID 0e:af:fb:79:13:b8 blacklist count incremented to 2 Sep 8 01:13:18 localhost NetworkManager: ^Iwpa_supplicant(5365): DISCONNECTED Sep 8 01:13:18 localhost NetworkManager: ^Iwpa_supplicant(5365): WEXT: Operstate: linkmode=-1, operstate=5 Sep 8 01:13:18 localhost NetworkManager: ^Iwpa_supplicant(5365): wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0 Sep 8 01:13:18 localhost NetworkManager: ^Iwpa_supplicant(5365): wpa_driver_wext_set_key: alg=0 key_idx=1 set_tx=0 seq_len=0 key_len=0 Sep 8 01:13:18 localhost NetworkManager: ^Iwpa_supplicant(5365): wpa_driver_wext_set_key: alg=0 key_idx=2 set_tx=0 seq_len=0 key_len=0 Sep 8 01:13:18 localhost NetworkManager: ^Iwpa_supplicant(5365): wpa_driver_wext_set_key: alg=0 key_idx=3 set_tx=0 seq_len=0 key_len=0 Sep 8 01:13:18 localhost NetworkManager: ^Iwpa_supplicant(5365): EAPOL: External notification - portEnabled=0 Sep 8 01:13:18 localhost NetworkManager: ^Iwpa_supplicant(5365): EAPOL: External notification - portValid=0 Sep 8 01:13:18 localhost NetworkManager: ^Iwpa_supplicant(5365): Setting scan request: 0 sec 0 usec Sep 8 01:13:18 localhost NetworkManager: ^Iwpa_supplicant(5365): State: DISCONNECTED -> SCANNING Sep 8 01:13:18 localhost NetworkManager: ^Iwpa_supplicant(5365): Starting AP scan (broadcast SSID) Sep 8 01:13:18 localhost NetworkManager: ^Iwpa_supplicant(5365): Scan timeout - try to get results Sep 8 01:13:18 localhost NetworkManager: ^Iwpa_supplicant(5365): Received 492 bytes of scan results (2 BSSes) Sep 8 01:13:18 localhost NetworkManager: ^Iwpa_supplicant(5365): Scan results: 2 Sep 8 01:13:18 localhost NetworkManager: ^Iwpa_supplicant(5365): Selecting BSS from priority group 0 Sep 8 01:13:18 localhost NetworkManager: ^Iwpa_supplicant(5365): 0: ca:66:24:0d:8a:14 ssid='reseau_freebox' wpa_ie_len=28 rsn_ie_len=0 caps=0x11 Sep 8 01:13:18 localhost NetworkManager: ^Iwpa_supplicant(5365): skip - SSID mismatch Sep 8 01:13:18 localhost NetworkManager: ^Iwpa_supplicant(5365): 1: 0e:af:fb:79:13:b8 ssid='Lastnico' wpa_ie_len=0 rsn_ie_len=0 caps=0x11 Sep 8 01:13:18 localhost NetworkManager: ^Iwpa_supplicant(5365): skip - blacklisted Sep 8 01:13:18 localhost NetworkManager: ^Iwpa_supplicant(5365): No APs found - clear blacklist and try again Sep 8 01:13:18 localhost NetworkManager: ^Iwpa_supplicant(5365): Removed BSSID 0e:af:fb:79:13:b8 from blacklist (clear) Sep 8 01:13:18 localhost NetworkManager: ^Iwpa_supplicant(5365): Selecting BSS from priority group 0 Sep 8 01:13:18 localhost NetworkManager: ^Iwpa_supplicant(5365): u_freebox' wpa_ie_len=28 rsn_ie_len=0 caps=0x11 Sep 8 01:13:18 localhost NetworkManager: ^Iwpa_supplicant(5365): skip - SSID mismatch Sep 8 01:13:18 localhost NetworkManager: ^Iwpa_supplicant(5365): 1: 0e:af:fb:79:13:b8 ssid='Lastnico' wpa_ie_len=0 rsn_ie_len=0 caps=0x11 Sep 8 01:13:18 localhost NetworkManager: ^Iwpa_supplicant(5365): skip - no WPA/RSN IE Sep 8 01:13:18 localhost NetworkManager: ^Iwpa_supplicant(5365): selected non-WPA AP 0e:af:fb:79:13:b8 ssid='Lastnico' Sep 8 01:13:18 localhost NetworkManager: ^Iwpa_supplicant(5365): Trying to associate with 0e:af:fb:79:13:b8 (SSID='Lastnico' freq=2462 MHz) Sep 8 01:13:18 localhost NetworkManager: ^Iwpa_supplicant(5365): CTRL_IFACE monitor send - hexdump(len=40): 2f 76 61 72 2f 72 75 6e 2f 4e 65 74 77 6f 72 6b 4d 61 6e 61 67 65 72 2f 77 70 61 5f 63 74 72 6c 5f 34 35 30 37 2d 31 00 Sep 8 01:13:18 localhost NetworkManager: ^Iwpa_supplicant(5365): Cancelling scan request Sep 8 01:13:18 localhost NetworkManager: ^Iwpa_supplicant(5365): WPA: clearing own WPA/RSN IE Sep 8 01:13:18 localhost NetworkManager: ^Iwpa_supplicant(5365): Automatic auth_alg selection: 0x1 Sep 8 01:13:18 localhost NetworkManager: ^Iwpa_supplicant(5365): WPA: clearing AP WPA IE Sep 8 01:13:18 localhost NetworkManager: ^Iwpa_supplicant(5365): WPA: clearing AP RSN IE Sep 8 01:13:18 localhost NetworkManager: ^Iwpa_supplicant(5365): WPA: clearing own WPA/RSN IE Sep 8 01:13:18 localhost NetworkManager: ^Iwpa_supplicant(5365): No keys have been configured - skip key clearing Sep 8 01:13:18 localhost NetworkManager: ^Iwpa_supplicant(5365): State: SCANNING -> ASSOCIATING Sep 8 01:13:18 localhost NetworkManager: ^Iwpa_supplicant(5365): WEXT: Operstate: linkmode=-1, operstate=5 Sep 8 01:13:18 localhost NetworkManager: ^Iwpa_supplicant(5365): Association request to the driver failed Sep 8 01:13:18 localhost NetworkManager: ^Iwpa_supplicant(5365): CTRL_IFACE monitor send - hexdump(len=40): 2f 76 61 72 2f 72 75 6e 2f 4e 65 74 77 6f 72 6b 4d 61 6e 61 67 65 72 2f 77 70 61 5f 63 74 72 6c 5f 34 35 30 37 2d 31 00 Sep 8 01:13:18 localhost NetworkManager: ^Iwpa_supplicant(5365): Setting authentication timeout: 5 sec 0 usec Sep 8 01:13:34 localhost NetworkManager: ^Iwpa_supplicant(5365): tion - portControl=ForceAuthorized Sep 8 01:13:34 localhost NetworkManager: ^Iwpa_supplicant(5365): Authentication with 00:00:00:00:00:00 timed out. Sep 8 01:13:34 localhost NetworkManager: ^Iwpa_supplicant(5365): CTRL_IFACE monitor send - hexdump(len=40): 2f 76 61 72 2f 72 75 6e 2f 4e 65 74 77 6f 72 6b 4d 61 6e 61 67 65 72 2f 77 70 61 5f 63 74 72 6c 5f 34 35 30 37 2d 31 00 Sep 8 01:13:34 localhost NetworkManager: ^Iwpa_supplicant(5365): Added BSSID 0e:af:fb:79:13:b8 into blacklist Sep 8 01:13:34 localhost NetworkManager: ^Iwpa_supplicant(5365): State: ASSOCIATING -> DISCONNECTED Sep 8 01:13:34 localhost NetworkManager: ^Iwpa_supplicant(5365): WEXT: Operstate: linkmode=-1, operstate=5 Sep 8 01:13:34 localhost NetworkManager: ^Iwpa_supplicant(5365): wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0 Sep 8 01:13:34 localhost NetworkManager: ^Iwpa_supplicant(5365): wpa_driver_wext_set_key: alg=0 key_idx=1 set_tx=0 seq_len=0 key_len=0 Sep 8 01:13:34 localhost NetworkManager: ^Iwpa_supplicant(5365): wpa_driver_wext_set_key: alg=0 key_idx=2 set_tx=0 seq_len=0 key_len=0 Sep 8 01:13:34 localhost NetworkManager: ^Iwpa_supplicant(5365): wpa_driver_wext_set_key: alg=0 key_idx=3 set_tx=0 seq_len=0 key_len=0 Sep 8 01:13:34 localhost NetworkManager: ^Iwpa_supplicant(5365): EAPOL: External notification - portEnabled=0 Sep 8 01:13:34 localhost NetworkManager: ^Iwpa_supplicant(5365): EAPOL: External notification - portValid=0 Sep 8 01:13:34 localhost NetworkManager: ^Iwpa_supplicant(5365): Setting scan request: 0 sec 0 usec Sep 8 01:13:34 localhost NetworkManager: ^Iwpa_supplicant(5365): State: DISCONNECTED -> SCANNING Sep 8 01:13:34 localhost NetworkManager: ^Iwpa_supplicant(5365): Starting AP scan (broadcast SSID) Sep 8 01:13:34 localhost NetworkManager: ^Iwpa_supplicant(5365): Scan timeout - try to get results Sep 8 01:13:34 localhost NetworkManager: ^Iwpa_supplicant(5365): Received 492 bytes of scan results (2 BSSes) Sep 8 01:13:34 localhost NetworkManager: ^Iwpa_supplicant(5365): Scan results: 2 Sep 8 01:13:34 localhost NetworkManager: ^Iwpa_supplicant(5365): Selecting BSS from priority group 0 Sep 8 01:13:34 localhost NetworkManager: ^Iwpa_supplicant(5365): 28 rsn_ie_len=0 caps=0x11 Sep 8 01:13:34 localhost NetworkManager: ^Iwpa_supplicant(5365): skip - SSID mismatch Sep 8 01:13:34 localhost NetworkManager: ^Iwpa_supplicant(5365): 1: 0e:af:fb:79:13:b8 ssid='Lastnico' wpa_ie_len=0 rsn_ie_len=0 caps=0x11 Sep 8 01:13:34 localhost NetworkManager: ^Iwpa_supplicant(5365): skip - no WPA/RSN IE Sep 8 01:13:34 localhost NetworkManager: ^Iwpa_supplicant(5365): selected non-WPA AP 0e:af:fb:79:13:b8 ssid='Lastnico' Sep 8 01:13:34 localhost NetworkManager: ^Iwpa_supplicant(5365): Trying to associate with 0e:af:fb:79:13:b8 (SSID='Lastnico' freq=2462 MHz) Sep 8 01:13:34 localhost NetworkManager: ^Iwpa_supplicant(5365): CTRL_IFACE monitor send - hexdump(len=40): 2f 76 61 72 2f 72 75 6e 2f 4e 65 74 77 6f 72 6b 4d 61 6e 61 67 65 72 2f 77 70 61 5f 63 74 72 6c 5f 34 35 30 37 2d 31 00 Sep 8 01:13:34 localhost NetworkManager: ^Iwpa_supplicant(5365): Cancelling scan request Sep 8 01:13:34 localhost NetworkManager: ^Iwpa_supplicant(5365): WPA: clearing own WPA/RSN IE Sep 8 01:13:34 localhost NetworkManager: ^Iwpa_supplicant(5365): Automatic auth_alg selection: 0x1 Sep 8 01:13:34 localhost NetworkManager: ^Iwpa_supplicant(5365): WPA: clearing AP WPA IE Sep 8 01:13:34 localhost NetworkManager: ^Iwpa_supplicant(5365): WPA: clearing AP RSN IE Sep 8 01:13:34 localhost NetworkManager: ^Iwpa_supplicant(5365): WPA: clearing own WPA/RSN IE Sep 8 01:13:34 localhost NetworkManager: ^Iwpa_supplicant(5365): No keys have been configured - skip key clearing Sep 8 01:13:34 localhost NetworkManager: ^Iwpa_supplicant(5365): State: SCANNING -> ASSOCIATING Sep 8 01:13:34 localhost NetworkManager: ^Iwpa_supplicant(5365): WEXT: Operstate: linkmode=-1, operstate=5 Sep 8 01:13:34 localhost NetworkManager: ^Iwpa_supplicant(5365): Association request to the driver failed Sep 8 01:13:34 localhost NetworkManager: ^Iwpa_supplicant(5365): CTRL_IFACE monitor send - hexdump(len=40): 2f 76 61 72 2f 72 75 6e 2f 4e 65 74 77 6f 72 6b 4d 61 6e 61 67 65 72 2f 77 70 61 5f 63 74 72 6c 5f 34 35 30 37 2d 31 00 Sep 8 01:13:34 localhost NetworkManager: ^Iwpa_supplicant(5365): Setting authentication timeout: 5 sec 0 usec Sep 8 01:13:34 localhost NetworkManager: ^Iwpa_supplicant(5365): ceAuthorized Sep 8 01:13:34 localhost NetworkManager: ^Iwpa_supplicant(5365): Authentication with 00:00:00:00:00:00 timed out. Sep 8 01:13:34 localhost NetworkManager: ^Iwpa_supplicant(5365): CTRL_IFACE monitor send - hexdump(len=40): 2f 76 61 72 2f 72 75 6e 2f 4e 65 74 77 6f 72 6b 4d 61 6e 61 67 65 72 2f 77 70 61 5f 63 74 72 6c 5f 34 35 30 37 2d 31 00 Sep 8 01:13:34 localhost NetworkManager: ^Iwpa_supplicant(5365): BSSID 0e:af:fb:79:13:b8 blacklist count incremented to 2 Sep 8 01:13:34 localhost NetworkManager: ^Iwpa_supplicant(5365): State: ASSOCIATING -> DISCONNECTED Sep 8 01:13:34 localhost NetworkManager: ^Iwpa_supplicant(5365): WEXT: Operstate: linkmode=-1, operstate=5 Sep 8 01:13:34 localhost NetworkManager: ^Iwpa_supplicant(5365): wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0 Sep 8 01:13:34 localhost NetworkManager: ^Iwpa_supplicant(5365): wpa_driver_wext_set_key: alg=0 key_idx=1 set_tx=0 seq_len=0 key_len=0 Sep 8 01:13:34 localhost NetworkManager: ^Iwpa_supplicant(5365): wpa_driver_wext_set_key: alg=0 key_idx=2 set_tx=0 seq_len=0 key_len=0 Sep 8 01:13:34 localhost NetworkManager: ^Iwpa_supplicant(5365): wpa_driver_wext_set_key: alg=0 key_idx=3 set_tx=0 seq_len=0 key_len=0 Sep 8 01:13:34 localhost NetworkManager: ^Iwpa_supplicant(5365): EAPOL: External notification - portEnabled=0 Sep 8 01:13:34 localhost NetworkManager: ^Iwpa_supplicant(5365): EAPOL: External notification - portValid=0 Sep 8 01:13:34 localhost NetworkManager: ^Iwpa_supplicant(5365): Setting scan request: 0 sec 0 usec Sep 8 01:13:34 localhost NetworkManager: ^Iwpa_supplicant(5365): State: DISCONNECTED -> SCANNING Sep 8 01:13:34 localhost NetworkManager: ^Iwpa_supplicant(5365): Starting AP scan (broadcast SSID) Sep 8 01:13:34 localhost NetworkManager: ^Iwpa_supplicant(5365): Scan timeout - try to get results Sep 8 01:13:34 localhost NetworkManager: ^Iwpa_supplicant(5365): Received 492 bytes of scan results (2 BSSes) Sep 8 01:13:34 localhost NetworkManager: ^Iwpa_supplicant(5365): Scan results: 2 Sep 8 01:13:34 localhost NetworkManager: ^Iwpa_supplicant(5365): Selecting BSS from priority group 0 Sep 8 01:13:34 localhost NetworkManager: ^Iwpa_supplicant(5365): len=0 caps=0x11 Sep 8 01:13:34 localhost NetworkManager: ^Iwpa_supplicant(5365): skip - SSID mismatch Sep 8 01:13:34 localhost NetworkManager: ^Iwpa_supplicant(5365): 1: 0e:af:fb:79:13:b8 ssid='Lastnico' wpa_ie_len=0 rsn_ie_len=0 caps=0x11 Sep 8 01:13:34 localhost NetworkManager: ^Iwpa_supplicant(5365): skip - blacklisted Sep 8 01:13:34 localhost NetworkManager: ^Iwpa_supplicant(5365): No APs found - clear blacklist and try again Sep 8 01:13:34 localhost NetworkManager: ^Iwpa_supplicant(5365): Removed BSSID 0e:af:fb:79:13:b8 from blacklist (clear) Sep 8 01:13:34 localhost NetworkManager: ^Iwpa_supplicant(5365): Selecting BSS from priority group 0 Sep 8 01:13:34 localhost NetworkManager: ^Iwpa_supplicant(5365): 0: ca:66:24:0d:8a:14 ssid='reseau_freebox' wpa_ie_len=28 rsn_ie_len=0 caps=0x11 Sep 8 01:13:34 localhost NetworkManager: ^Iwpa_supplicant(5365): skip - SSID mismatch Sep 8 01:13:34 localhost NetworkManager: ^Iwpa_supplicant(5365): 1: 0e:af:fb:79:13:b8 ssid='Lastnico' wpa_ie_len=0 rsn_ie_len=0 caps=0x11 Sep 8 01:13:34 localhost NetworkManager: ^Iwpa_supplicant(5365): skip - no WPA/RSN IE Sep 8 01:13:34 localhost NetworkManager: ^Iwpa_supplicant(5365): selected non-WPA AP 0e:af:fb:79:13:b8 ssid='Lastnico' Sep 8 01:13:34 localhost NetworkManager: ^Iwpa_supplicant(5365): Trying to associate with 0e:af:fb:79:13:b8 (SSID='Lastnico' freq=2462 MHz) Sep 8 01:13:34 localhost NetworkManager: ^Iwpa_supplicant(5365): CTRL_IFACE monitor send - hexdump(len=40): 2f 76 61 72 2f 72 75 6e 2f 4e 65 74 77 6f 72 6b 4d 61 6e 61 67 65 72 2f 77 70 61 5f 63 74 72 6c 5f 34 35 30 37 2d 31 00 Sep 8 01:13:34 localhost NetworkManager: ^Iwpa_supplicant(5365): Cancelling scan request Sep 8 01:13:34 localhost NetworkManager: ^Iwpa_supplicant(5365): WPA: clearing own WPA/RSN IE Sep 8 01:13:34 localhost NetworkManager: ^Iwpa_supplicant(5365): Automatic auth_alg selection: 0x1 Sep 8 01:13:34 localhost NetworkManager: ^Iwpa_supplicant(5365): WPA: clearing AP WPA IE Sep 8 01:13:34 localhost NetworkManager: ^Iwpa_supplicant(5365): WPA: clearing AP RSN IE Sep 8 01:13:34 localhost NetworkManager: ^Iwpa_supplicant(5365): WPA: clearing own WPA/RSN IE Sep 8 01:13:34 localhost NetworkManager: ^Iwpa_supplicant(5365): No keys have been configured - skip key clearing Sep 8 01:13:34 localhost NetworkManager: ^Iwpa_supplicant(5365): State: SCANNING -> ASSOCIATING Sep 8 01:13:50 localhost NetworkManager: ^Iwpa_supplicant(5365): ate: linkmode=-1, operstate=5 Sep 8 01:13:50 localhost NetworkManager: ^Iwpa_supplicant(5365): Association request to the driver failed Sep 8 01:13:50 localhost NetworkManager: ^Iwpa_supplicant(5365): CTRL_IFACE monitor send - hexdump(len=40): 2f 76 61 72 2f 72 75 6e 2f 4e 65 74 77 6f 72 6b 4d 61 6e 61 67 65 72 2f 77 70 61 5f 63 74 72 6c 5f 34 35 30 37 2d 31 00 Sep 8 01:13:50 localhost NetworkManager: ^Iwpa_supplicant(5365): Setting authentication timeout: 5 sec 0 usec Sep 8 01:13:50 localhost NetworkManager: ^Iwpa_supplicant(5365): EAPOL: External notification - portControl=ForceAuthorized Sep 8 01:13:50 localhost NetworkManager: ^Iwpa_supplicant(5365): Authentication with 00:00:00:00:00:00 timed out. Sep 8 01:13:50 localhost NetworkManager: ^Iwpa_supplicant(5365): CTRL_IFACE monitor send - hexdump(len=40): 2f 76 61 72 2f 72 75 6e 2f 4e 65 74 77 6f 72 6b 4d 61 6e 61 67 65 72 2f 77 70 61 5f 63 74 72 6c 5f 34 35 30 37 2d 31 00 Sep 8 01:13:50 localhost NetworkManager: ^Iwpa_supplicant(5365): Added BSSID 0e:af:fb:79:13:b8 into blacklist Sep 8 01:13:50 localhost NetworkManager: ^Iwpa_supplicant(5365): State: ASSOCIATING -> DISCONNECTED Sep 8 01:13:50 localhost NetworkManager: ^Iwpa_supplicant(5365): WEXT: Operstate: linkmode=-1, operstate=5 Sep 8 01:13:50 localhost NetworkManager: ^Iwpa_supplicant(5365): wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0 Sep 8 01:13:50 localhost NetworkManager: ^Iwpa_supplicant(5365): wpa_driver_wext_set_key: alg=0 key_idx=1 set_tx=0 seq_len=0 key_len=0 Sep 8 01:13:50 localhost NetworkManager: ^Iwpa_supplicant(5365): wpa_driver_wext_set_key: alg=0 key_idx=2 set_tx=0 seq_len=0 key_len=0 Sep 8 01:13:50 localhost NetworkManager: ^Iwpa_supplicant(5365): wpa_driver_wext_set_key: alg=0 key_idx=3 set_tx=0 seq_len=0 key_len=0 Sep 8 01:13:50 localhost NetworkManager: ^Iwpa_supplicant(5365): EAPOL: External notification - portEnabled=0 Sep 8 01:13:50 localhost NetworkManager: ^Iwpa_supplicant(5365): on - portValid=0 Sep 8 01:13:50 localhost NetworkManager: ^Iwpa_supplicant(5365): Setting scan request: 0 sec 0 usec Sep 8 01:13:50 localhost NetworkManager: ^Iwpa_supplicant(5365): State: DISCONNECTED -> SCANNING Sep 8 01:13:50 localhost NetworkManager: ^Iwpa_supplicant(5365): Starting AP scan (broadcast SSID) Sep 8 01:13:50 localhost NetworkManager: ^Iwpa_supplicant(5365): Scan timeout - try to get results Sep 8 01:13:50 localhost NetworkManager: ^Iwpa_supplicant(5365): Received 492 bytes of scan results (2 BSSes) Sep 8 01:13:50 localhost NetworkManager: ^Iwpa_supplicant(5365): Scan results: 2 Sep 8 01:13:50 localhost NetworkManager: ^Iwpa_supplicant(5365): Selecting BSS from priority group 0 Sep 8 01:13:50 localhost NetworkManager: ^Iwpa_supplicant(5365): 0: ca:66:24:0d:8a:14 ssid='reseau_freebox' wpa_ie_len=28 rsn_ie_len=0 caps=0x11 Sep 8 01:13:50 localhost NetworkManager: ^Iwpa_supplicant(5365): skip - SSID mismatch Sep 8 01:13:50 localhost NetworkManager: ^Iwpa_supplicant(5365): 1: 0e:af:fb:79:13:b8 ssid='Lastnico' wpa_ie_len=0 rsn_ie_len=0 caps=0x11 Sep 8 01:13:50 localhost NetworkManager: ^Iwpa_supplicant(5365): skip - no WPA/RSN IE Sep 8 01:13:50 localhost NetworkManager: ^Iwpa_supplicant(5365): selected non-WPA AP 0e:af:fb:79:13:b8 ssid='Lastnico' Sep 8 01:13:50 localhost NetworkManager: ^Iwpa_supplicant(5365): Trying to associate with 0e:af:fb:79:13:b8 (SSID='Lastnico' freq=2462 MHz) Sep 8 01:13:50 localhost NetworkManager: ^Iwpa_supplicant(5365): CTRL_IFACE monitor send - hexdump(len=40): 2f 76 61 72 2f 72 75 6e 2f 4e 65 74 77 6f 72 6b 4d 61 6e 61 67 65 72 2f 77 70 61 5f 63 74 72 6c 5f 34 35 30 37 2d 31 00 Sep 8 01:13:50 localhost NetworkManager: ^Iwpa_supplicant(5365): Cancelling scan request Sep 8 01:13:50 localhost NetworkManager: ^Iwpa_supplicant(5365): WPA: clearing own WPA/RSN IE Sep 8 01:13:50 localhost NetworkManager: ^Iwpa_supplicant(5365): Automatic auth_alg selection: 0x1 Sep 8 01:13:50 localhost NetworkManager: ^Iwpa_supplicant(5365): WPA: clearing AP WPA IE Sep 8 01:13:50 localhost NetworkManager: ^Iwpa_supplicant(5365): WPA: clearing AP RSN IE Sep 8 01:13:50 localhost NetworkManager: ^Iwpa_supplicant(5365): WPA: clearing own WPA/RSN IE Sep 8 01:13:50 localhost NetworkManager: ^Iwpa_supplicant(5365): No keys have been configured - skip key clearing Sep 8 01:13:50 localhost NetworkManager: ^Iwpa_supplicant(5365): State: SCANNING -> ASSOCIATING Sep 8 01:13:50 localhost NetworkManager: ^Iwpa_supplicant(5365): state=5 Sep 8 01:13:50 localhost NetworkManager: ^Iwpa_supplicant(5365): Association request to the driver failed Sep 8 01:13:50 localhost NetworkManager: ^Iwpa_supplicant(5365): CTRL_IFACE monitor send - hexdump(len=40): 2f 76 61 72 2f 72 75 6e 2f 4e 65 74 77 6f 72 6b 4d 61 6e 61 67 65 72 2f 77 70 61 5f 63 74 72 6c 5f 34 35 30 37 2d 31 00 Sep 8 01:13:50 localhost NetworkManager: ^Iwpa_supplicant(5365): Setting authentication timeout: 5 sec 0 usec Sep 8 01:13:50 localhost NetworkManager: ^Iwpa_supplicant(5365): EAPOL: External notification - portControl=ForceAuthorized Sep 8 01:13:50 localhost NetworkManager: ^Iwpa_supplicant(5365): Authentication with 00:00:00:00:00:00 timed out. Sep 8 01:13:50 localhost NetworkManager: ^Iwpa_supplicant(5365): CTRL_IFACE monitor send - hexdump(len=40): 2f 76 61 72 2f 72 75 6e 2f 4e 65 74 77 6f 72 6b 4d 61 6e 61 67 65 72 2f 77 70 61 5f 63 74 72 6c 5f 34 35 30 37 2d 31 00 Sep 8 01:13:50 localhost NetworkManager: ^Iwpa_supplicant(5365): BSSID 0e:af:fb:79:13:b8 blacklist count incremented to 2 Sep 8 01:13:50 localhost NetworkManager: ^Iwpa_supplicant(5365): State: ASSOCIATING -> DISCONNECTED Sep 8 01:13:50 localhost NetworkManager: ^Iwpa_supplicant(5365): WEXT: Operstate: linkmode=-1, operstate=5 Sep 8 01:13:50 localhost NetworkManager: ^Iwpa_supplicant(5365): wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0 Sep 8 01:13:50 localhost NetworkManager: ^Iwpa_supplicant(5365): wpa_driver_wext_set_key: alg=0 key_idx=1 set_tx=0 seq_len=0 key_len=0 Sep 8 01:13:50 localhost NetworkManager: ^Iwpa_supplicant(5365): wpa_driver_wext_set_key: alg=0 key_idx=2 set_tx=0 seq_len=0 key_len=0 Sep 8 01:13:50 localhost NetworkManager: ^Iwpa_supplicant(5365): wpa_driver_wext_set_key: alg=0 key_idx=3 set_tx=0 seq_len=0 key_len=0 Sep 8 01:13:50 localhost NetworkManager: ^Iwpa_supplicant(5365): EAPOL: External notification - portEnabled=0 Sep 8 01:13:50 localhost NetworkManager: ^Iwpa_supplicant(5365): alid=0 Sep 8 01:13:50 localhost NetworkManager: ^Iwpa_supplicant(5365): Setting scan request: 0 sec 0 usec Sep 8 01:13:50 localhost NetworkManager: ^Iwpa_supplicant(5365): State: DISCONNECTED -> SCANNING Sep 8 01:13:50 localhost NetworkManager: ^Iwpa_supplicant(5365): Starting AP scan (broadcast SSID) Sep 8 01:13:50 localhost NetworkManager: ^Iwpa_supplicant(5365): Scan timeout - try to get results Sep 8 01:13:50 localhost NetworkManager: ^Iwpa_supplicant(5365): Received 492 bytes of scan results (2 BSSes) Sep 8 01:13:50 localhost NetworkManager: ^Iwpa_supplicant(5365): Scan results: 2 Sep 8 01:13:50 localhost NetworkManager: ^Iwpa_supplicant(5365): Selecting BSS from priority group 0 Sep 8 01:13:50 localhost NetworkManager: ^Iwpa_supplicant(5365): 0: ca:66:24:0d:8a:14 ssid='reseau_freebox' wpa_ie_len=28 rsn_ie_len=0 caps=0x11 Sep 8 01:13:50 localhost NetworkManager: ^Iwpa_supplicant(5365): skip - SSID mismatch Sep 8 01:13:50 localhost NetworkManager: ^Iwpa_supplicant(5365): 1: 0e:af:fb:79:13:b8 ssid='Lastnico' wpa_ie_len=0 rsn_ie_len=0 caps=0x11 Sep 8 01:13:50 localhost NetworkManager: ^Iwpa_supplicant(5365): skip - blacklisted Sep 8 01:13:50 localhost NetworkManager: ^Iwpa_supplicant(5365): No APs found - clear blacklist and try again Sep 8 01:13:50 localhost NetworkManager: ^Iwpa_supplicant(5365): Removed BSSID 0e:af:fb:79:13:b8 from blacklist (clear) Sep 8 01:13:50 localhost NetworkManager: ^Iwpa_supplicant(5365): Selecting BSS from priority group 0 Sep 8 01:13:50 localhost NetworkManager: ^Iwpa_supplicant(5365): 0: ca:66:24:0d:8a:14 ssid='reseau_freebox' wpa_ie_len=28 rsn_ie_len=0 caps=0x11 Sep 8 01:13:50 localhost NetworkManager: ^Iwpa_supplicant(5365): skip - SSID mismatch Sep 8 01:13:50 localhost NetworkManager: ^Iwpa_supplicant(5365): 1: 0e:af:fb:79:13:b8 ssid='Lastnico' wpa_ie_len=0 rsn_ie_len=0 caps=0x11 Sep 8 01:13:50 localhost NetworkManager: ^Iwpa_supplicant(5365): skip - no WPA/RSN IE Sep 8 01:13:50 localhost NetworkManager: ^Iwpa_supplicant(5365): selected non-WPA AP 0e:af:fb:79:13:b8 ssid='Lastnico' Sep 8 01:13:50 localhost NetworkManager: ^Iwpa_supplicant(5365): Trying to associate with 0e:af:fb:79:13:b8 (SSID='Lastnico' freq=2462 MHz) Sep 8 01:14:02 localhost NetworkManager: ^IActivation (eth0/wireless): association took too long (>60s), failing activation. Sep 8 01:14:02 localhost NetworkManager: ^IActivation (eth0) failure scheduled... Sep 8 01:14:02 localhost NetworkManager: ^IActivation (eth0) failed for access point (Lastnico) Sep 8 01:14:02 localhost NetworkManager: ^IActivation (eth0) failed. Sep 8 01:14:02 localhost NetworkManager: ^IDeactivating device eth0. Sep 8 01:14:02 localhost dhclient: receive_packet failed on eth0: Network is down Sep 8 01:14:15 localhost kernel: [17179806.536000] ADDRCONF(NETDEV_UP): eth0: link is not ready ^[[5~ ** Affects: ndiswrapper (Ubuntu) Importance: Untriaged Status: Unconfirmed -- Broadcom 4318 driver with ndiswrapper do not work anymore https://launchpad.net/bugs/59432 From peteroyle at hitcity.com.au Fri Sep 8 01:10:10 2006 From: peteroyle at hitcity.com.au (Peter Royle) Date: Fri, 08 Sep 2006 01:10:10 -0000 Subject: [Bug 23445] Re: iMac G5 will freeze after booting up References: <20060113142343.21012.90472.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060908011010.12752.28903.malone@gandwana.ubuntu.com> Clemens, jk: Using 20" iMac G5 RevC with Edgy Knot 2 alternate install After installing in text mode I found the same problem as you on my iMac G5 RevC when I booted up. Updating the xorg.conf fixed the problem. I'm currently using a configuration based on the one available at http://bersace03.free.fr/pub/Linux/iMac%20G5/. I think that one's for a 17" (and also note the locale is french) but if you want you can download my modified version for 20" and US keyboard (attached). To be able to modify the xorg I had to boot off of the alternate-install disk in rescue mode and start up a shell in my edgy root partition. You can then wget the xorg.conf from my server. In time I'll probably try to determine the differences between the config that ships with edgy and the version I'm using now to see what needs to change in the shipped config to make it work. ** Attachment added: "Working xorg.conf for Imac G5 Rev C (20", US keyboard)" http://librarian.launchpad.net/4182626/xorg.conf -- iMac G5 will freeze after booting up https://launchpad.net/bugs/23445 From peteroyle at hitcity.com.au Fri Sep 8 01:12:02 2006 From: peteroyle at hitcity.com.au (Peter Royle) Date: Fri, 08 Sep 2006 01:12:02 -0000 Subject: [Bug 23445] Re: iMac G5 will freeze after booting up References: <20060113142343.21012.90472.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060908011202.12752.10608.malone@gandwana.ubuntu.com> "You can then wget the xorg.conf from my server." Sorry, I was going to host it but then I saw the attachment section. Download the attachment instead :) -- iMac G5 will freeze after booting up https://launchpad.net/bugs/23445 From fargher at gmail.com Fri Sep 8 05:17:36 2006 From: fargher at gmail.com (Rob Fargher) Date: Fri, 08 Sep 2006 05:17:36 -0000 Subject: [Bug 56823] Re: via82cxxx disables DMA on Asrock 775Dual-VSTA References: <20060818162201.12488.49756.malonedeb@gangotri.ubuntu.com> Message-ID: <20060908051736.16587.57347.malone@gangotri.ubuntu.com> Aha! DMA is working in kernel 2.6.17-7-generic. -- via82cxxx disables DMA on Asrock 775Dual-VSTA https://launchpad.net/bugs/56823 From catkiller at catkiller4u.de Fri Sep 8 08:24:59 2006 From: catkiller at catkiller4u.de (catkiller) Date: Fri, 08 Sep 2006 08:24:59 -0000 Subject: [Bug 42600] Re: Microphone does not work on Dell Inspiron 630m References: <20060502153431.16712.10593.malonedeb@gandwana.ubuntu.com> Message-ID: <20060908082500.12796.60954.malone@gandwana.ubuntu.com> just installed the new alsa-1.0.13rc1 which includes the patch (yes, ive checked that!) and it does not work on my dell latitude d620 having an intel hda ich7-card. playback works fine, mic input just results in silence.... i dont think this bug is solved so. -- Microphone does not work on Dell Inspiron 630m https://launchpad.net/bugs/42600 From lynoure at gmail.com Fri Sep 8 09:07:10 2006 From: lynoure at gmail.com (Lynoure Braakman) Date: Fri, 08 Sep 2006 09:07:10 -0000 Subject: [Bug 50098] Re: visor module error References: <20060617105915.13137.62458.malonedeb@gandwana.ubuntu.com> Message-ID: <20060908090710.12796.66153.malone@gandwana.ubuntu.com> I get this error whenever I try to synch. However, I can do multiple backups fine if I do not try synching first. ** Attachment added: "error message found in dmesg" http://librarian.launchpad.net/4183316/dmesg -- visor module error https://launchpad.net/bugs/50098 From mvandegiessen at gmail.com Fri Sep 8 09:26:37 2006 From: mvandegiessen at gmail.com (mvandeg) Date: Fri, 08 Sep 2006 09:26:37 -0000 Subject: [Bug 36014] Re: kernel can't scale cpu frequency References: <20060322140248.30471.37870.malonedeb@gangotri.ubuntu.com> Message-ID: <20060908092637.16647.25260.malone@gangotri.ubuntu.com> Contrary to the experience of Luka Renko, frequency scaling still doesn't work in the current Edgy kernel (2.6.17-7.20 generic). The odd thing however is that it does work in 2.6.17-7.20 386. I have a Pentium M 2.0 Ghz. -- kernel can't scale cpu frequency https://launchpad.net/bugs/36014 From mgpoolman at brookes.ac.uk Fri Sep 8 11:15:39 2006 From: mgpoolman at brookes.ac.uk (Mark Poolman) Date: Fri, 08 Sep 2006 11:15:39 -0000 Subject: [Bug 59505] rf_kill problem on thinkpad Z60m References: <20060908111540.16587.82249.malonedeb@gangotri.ubuntu.com> Message-ID: <20060908111540.16587.82249.malonedeb@gangotri.ubuntu.com> Public bug reported: Binary package hint: linux-image-2.6.15-26-386 Wireless internet worked "out of the box" (dapper pre-installed by vendor) but abruptly stopped working after a couple of hours, and nothing I can do will get it going again. It appears that the ipw2200 hardware rf_kill is stuck on. The following may be of use: Typical from /var/log/kern.log: Sep 8 12:06:34 localhost kernel: [17181802.404000] ipw2200: Radio Frequency Kill Switch is On: Sep 8 12:06:34 localhost kernel: [17181802.404000] Kill switch must be turned off for wireless networking to work. >From a freshly booted machine: root at zeitgeist:~# iwconfig eth1 eth1 radio off ESSID:off/any Mode:Managed Channel:0 Access Point: Not-Associated Bit Rate=0 kb/s Tx-Power=off Sensitivity=8/0 Retry limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:off Link Quality:0 Signal level:0 Noise level:0 Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 root at zeitgeist:~# cat /sys/bus/pci/drivers/ipw2200/0000\:14\:02.0/rf_kill 2 root at zeitgeist:~# echo -n 0 > /sys/bus/pci/drivers/ipw2200/0000\:14\:02.0/rf_kill root at zeitgeist:~# cat /sys/bus/pci/drivers/ipw2200/0000\:14\:02.0/rf_kill 2 /********* now press Fn/F5 *********/ root at zeitgeist:~# iwconfig eth1 eth1 no wireless extensions. root at zeitgeist:~# cat /sys/bus/pci/drivers/ipw2200/0000\:14\:02.0/rf_kill 0 What is strange is that according to http://ipw2200.sourceforge.net/README.ipw2200: rf_kill read - 0 = RF kill not enabled (radio on) 1 = SW based RF kill active (radio off) 2 = HW based RF kill active (radio off) Many thanks for reading, Mark ** Affects: linux-source-2.6.15 (Ubuntu) Importance: Untriaged Status: Unconfirmed -- rf_kill problem on thinkpad Z60m https://launchpad.net/bugs/59505 From mgpoolman at brookes.ac.uk Fri Sep 8 11:33:44 2006 From: mgpoolman at brookes.ac.uk (Mark Poolman) Date: Fri, 08 Sep 2006 11:33:44 -0000 Subject: [Bug 59505] Re: rf_kill problem on thinkpad Z60m References: <20060908111540.16587.82249.malonedeb@gangotri.ubuntu.com> Message-ID: <20060908113344.16587.58943.malone@gangotri.ubuntu.com> Also submitted to bugzilla http://bughost.org/bugzilla/show_bug.cgi?id=1126 Mark -- rf_kill problem on thinkpad Z60m https://launchpad.net/bugs/59505 From john.dong at gmail.com Fri Sep 8 12:58:04 2006 From: john.dong at gmail.com (John Dong) Date: Fri, 08 Sep 2006 12:58:04 -0000 Subject: [Bug 45167] Re: snd_hda: Default mixer channel is PCM instead of Front References: <20060517030521.15819.80093.malonedeb@gangotri.ubuntu.com> Message-ID: <20060908125804.12752.46931.malone@gandwana.ubuntu.com> I can confirm that the same problem occurs in Edgy. However, after updating my ALSA modules to the latest RC (1.1.13rc1, I believe?), I was pleasantly surprised to find that PCM is now capable of fully controlling the volume. Browsing through the changelog, it mentions a bugfix for my laptop (Acer with ALC883 codec). Over at the forums, there are 3 or 4 Acer laptop owners reporting a problem where they do not get any sound on Dapper or Edgy, but after upgrading to the latest Alsa RC, they get sound. So, if Edgy (at least), and hopefully Dapper can get this Alsa fix backported, that would close this problem. ** Also affects: linux-source-2.6.17 (Ubuntu) Importance: Untriaged Status: Unconfirmed ** Changed in: linux-source-2.6.17 (Ubuntu) Status: Unconfirmed => Confirmed -- snd_hda: Default mixer channel is PCM instead of Front https://launchpad.net/bugs/45167 From pascal at tipisoft.dk Fri Sep 8 14:17:50 2006 From: pascal at tipisoft.dk (Pascal) Date: Fri, 08 Sep 2006 14:17:50 -0000 Subject: [Bug 50031] Re: [regression] Suspend [to-RAM and to-disk] is broken in 2.6.15-25.43 References: <20060616182146.13137.51951.malonedeb@gandwana.ubuntu.com> Message-ID: <20060908141750.12752.9438.malone@gandwana.ubuntu.com> Doesn't work on my Toshiba Sattelite either. Tested on both edgy Knot 2 and dapper -- [regression] Suspend [to-RAM and to-disk] is broken in 2.6.15-25.43 https://launchpad.net/bugs/50031 From hobbsee at ubuntu.com Fri Sep 8 14:53:18 2006 From: hobbsee at ubuntu.com (Sarah Hobbs) Date: Fri, 08 Sep 2006 14:53:18 -0000 Subject: [Bug 59350] Re: [Edgy] Please Sync ndiswrapper-source 1.23-1 from Debian unstable References: <20060907141936.12796.85334.malonedeb@gandwana.ubuntu.com> Message-ID: <20060908145318.16587.14445.malone@gangotri.ubuntu.com> can all of the ubuntu changes be dropped? last time i looked, this wasnt the case. Please add in all the ubuntu changes, and list why they can be dropped. -- [Edgy] Please Sync ndiswrapper-source 1.23-1 from Debian unstable https://launchpad.net/bugs/59350 From joachim at kom.aau.dk Fri Sep 8 15:33:12 2006 From: joachim at kom.aau.dk (JDahl) Date: Fri, 08 Sep 2006 15:33:12 -0000 Subject: [Bug 38263] Re: freeze at startup References: <20060405194706.24486.46138.malonedeb@gangotri.ubuntu.com> Message-ID: <20060908153312.12752.8125.malone@gandwana.ubuntu.com> I have the exact same problem with lockups during installation of Edgy i386 on a HP Pavilion AMD64 PC. The computer has an Amethyst motherboard and Phoenix BIOS, so the problem is not restricted to ASUS motherboards. I previously had to install dapper with -nodma, to avoid lockups when mounting CD-ROMs. ** Attachment added: "output of dmidecode" http://librarian.launchpad.net/4197819/dmidecode.out -- freeze at startup https://launchpad.net/bugs/38263 From ml at lofl.de Fri Sep 8 15:45:50 2006 From: ml at lofl.de (Max Lindner) Date: Fri, 08 Sep 2006 15:45:50 -0000 Subject: [Bug 54513] Re: DHCP and DNS do not function on eth0 with kernel 2.6.15-26-k7 - works fine with 2.6.15-25-k7 References: <20060730023434.3814.5978.malonedeb@gangotri.ubuntu.com> Message-ID: <20060908154550.16647.91331.launchpad@gangotri.ubuntu.com> ** Bug 52900 has been marked a duplicate of this bug -- DHCP and DNS do not function on eth0 with kernel 2.6.15-26-k7 - works fine with 2.6.15-25-k7 https://launchpad.net/bugs/54513 From ml at lofl.de Fri Sep 8 15:42:17 2006 From: ml at lofl.de (Max Lindner) Date: Fri, 08 Sep 2006 15:42:17 -0000 Subject: [Bug 52900] Re: eth0 bad working to linux-headers-2.6.15-26-k7 References: <20060713184533.25598.92715.malonedeb@gangotri.ubuntu.com> Message-ID: <20060908154217.12752.30748.malone@gandwana.ubuntu.com> *** This bug is a duplicate of bug 54513 *** I must confirm this. Mainboard here is via epia sp8000e with onboard Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 78) With kernel 2.6.15-25 it works, with 2.6.15-26 not :( ** This bug has been marked a duplicate of bug 54513 DHCP and DNS do not function on eth0 with kernel 2.6.15-26-k7 - works fine with 2.6.15-25-k7 -- eth0 bad working to linux-headers-2.6.15-26-k7 https://launchpad.net/bugs/52900 From ben.collins at ubuntu.com Fri Sep 8 19:10:40 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Fri, 08 Sep 2006 19:10:40 -0000 Subject: [Bug 38865] Re: sky2 driver freezing system after ifdown and ifup References: <20060409125752.32313.97119.malonedeb@gandwana.ubuntu.com> Message-ID: <20060908191040.16647.73153.malone@gangotri.ubuntu.com> Well, no one tested my kernels. I could just back out the fix because of that, but instead I'll leave it in, and just hope it works. If it isn't fixed, then we'll have to wait for the next kernel update. -- sky2 driver freezing system after ifdown and ifup https://launchpad.net/bugs/38865 From fab at gnux.info Fri Sep 8 19:24:13 2006 From: fab at gnux.info (fab) Date: Fri, 08 Sep 2006 19:24:13 -0000 Subject: [Bug 38865] Re: [Bug 38865] Re: sky2 driver freezing system after ifdown and ifup References: <20060409125752.32313.97119.malonedeb@gandwana.ubuntu.com> <20060908191040.16647.73153.malone@gangotri.ubuntu.com> Message-ID: <20060908192412.GA26718@blackmilk.localzone.fr> On 08/09/06 19:10 -0000, Ben Collins wrote: > Well, no one tested my kernels. I could just back out the fix because of > that, but instead I'll leave it in, and just hope it works. > > If it isn't fixed, then we'll have to wait for the next kernel update. I think my problem is associated to a wrong bug, I use sky2 and it's ok after ifup/ifdown with latest ubuntu kernel... but when I transfert a file (high usage of the network card) it stops working, and I have to reload reload the module and reconfigure everything... I'm ready to test something if you want to. Best regards. fab. -- sky2 driver freezing system after ifdown and ifup https://launchpad.net/bugs/38865 From john.dong at gmail.com Fri Sep 8 19:31:37 2006 From: john.dong at gmail.com (John Dong) Date: Fri, 08 Sep 2006 19:31:37 -0000 Subject: [Bug 59562] Backport tifm drivers from Edgy kernel to Dapper kernel References: <20060908193137.16587.5701.malonedeb@gangotri.ubuntu.com> Message-ID: <20060908193137.16587.5701.malonedeb@gangotri.ubuntu.com> Public bug reported: the tifm21xx drivers (tifm_core, tifm_7xx1, and so on) provide some level of functionality to the ever-increasingly-popular TI FlashMedia 5-in-1 card readers found in many store-bought laptops. The support for it is now in Edgy's kernel, but the driver doesn't compile out-of-the- tarball in Dapper. It'd be nice to have it on Dapper's kernel, though. ** Affects: linux-source-2.6.15 (Ubuntu) Importance: Untriaged Status: Unconfirmed ** Tags added: dapper-backport -- Backport tifm drivers from Edgy kernel to Dapper kernel https://launchpad.net/bugs/59562 From martin at gamesplace.info Fri Sep 8 20:04:18 2006 From: martin at gamesplace.info (=?utf-8?q?Martin_J=C3=BCrgens?=) Date: Fri, 08 Sep 2006 20:04:18 -0000 Subject: [Bug 30255] Re: Broadcom wlan chip is detected and modprobed correctly but does not work References: <20060201200012.11050.58876.malonedeb@gandwana.ubuntu.com> Message-ID: <20060908200418.12752.57095.launchpad@gandwana.ubuntu.com> ** Changed in: linux-meta (Ubuntu) Status: Unconfirmed => Rejected -- Broadcom wlan chip is detected and modprobed correctly but does not work https://launchpad.net/bugs/30255 From lee at rockingtiger.com Fri Sep 8 20:32:43 2006 From: lee at rockingtiger.com (a3ulafia) Date: Fri, 08 Sep 2006 20:32:43 -0000 Subject: [Bug 59569] snd_hda_intel driver provides only playback on macbook References: <20060908203243.16587.39934.malonedeb@gangotri.ubuntu.com> Message-ID: <20060908203243.16587.39934.malonedeb@gangotri.ubuntu.com> Public bug reported: Binary package hint: linux-image-2.6.15-26-686 This bug has been confirmed on other brands of laptop with the same chipset but there's nothing in malone about the macbook. It seems the same driver can be used for a number of different codecs. The ALSA driver for this card loads and the mixer settings are displayed properly. Playback with volume control functions and there are options to select between the different capture sources. Unfortunately all the capture sources record silence via the built in microphone. I have not been able to test this with the mini plug microphone input. An IRC user named crimsun on #ubuntu-laptop said this will be fixed in the next kernel update for dapper but he didn't know if someone had alreaady posted a patch. I searched around and couldn't find a patch either. Here is the relevant information on the kernel and hardware lee at priceless:~/tmp$ uname -a Linux priceless 2.6.15-26-686 #1 SMP PREEMPT Thu Aug 3 03:13:28 UTC 2006 i686 GNU/Linux lee at priceless:~/tmp$ lspci | grep Audio 0000:00:1b.0 0403: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 02) lee at priceless:~/tmp$ cat /proc/asound/version Advanced Linux Sound Architecture Driver Version 1.0.10rc3 (Mon Nov 07 13:30:21 2005 UTC). lee at priceless:~/tmp$ cat /proc/asound/cards 0 [Intel ]: HDA-Intel - HDA Intel HDA Intel at 0x90440000 irq 209 lee at priceless:~/tmp$ cat /proc/asound/devices 17: [0- 1]: digital audio playback 16: [0- 0]: digital audio playback 24: [0- 0]: digital audio capture 0: [0- 0]: ctl 33: : timer lspci -nv 0000:00:1b.0 0403: 8086:27d8 (rev 02) Subsystem: 8384:7680 Flags: bus master, fast devsel, latency 0, IRQ 209 Memory at 90440000 (64-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 2 Capabilities: [60] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable- Capabilities: [70] #10 [0091] lee at priceless:~/tmp$ cat /proc/asound/card0/codec#0 Codec: SigmaTel STAC9221 A1 Address: 0 Vendor Id: 0x83847680 Subsystem Id: 0x100 Revision Id: 0x103401 Default PCM: rates 0x7e0, bits 0x0e, types 0x1 Default Amp-In caps: ofs=0x00, nsteps=0x0e, stepsize=0x05, mute=1 Default Amp-Out caps: ofs=0x7f, nsteps=0x7f, stepsize=0x02, mute=1 Node 0x02 [Audio Output] wcaps 0xd0c05: Stereo Amp-Out Amp-Out caps: N/A Amp-Out vals: [0x7b 0x7b] Power: 0x0 Node 0x03 [Audio Output] wcaps 0xd0c05: Stereo Amp-Out Amp-Out caps: N/A Amp-Out vals: [0x7f 0x7f] Power: 0x0 Node 0x04 [Audio Output] wcaps 0xd0c05: Stereo Amp-Out Amp-Out caps: N/A Amp-Out vals: [0x7f 0x7f] Power: 0x0 Node 0x05 [Audio Output] wcaps 0xd0c05: Stereo Amp-Out Amp-Out caps: N/A Amp-Out vals: [0x7f 0x7f] Power: 0x0 Node 0x06 [Audio Input] wcaps 0x1d0541: Stereo Power: 0x0 Connection: 1 0x17 Node 0x07 [Audio Input] wcaps 0x1d0541: Stereo Power: 0x0 Connection: 1 0x18 Node 0x08 [Audio Output] wcaps 0x40211: Stereo Digital PCM: rates 0x7e0, bits 0x0e, types 0x5 Node 0x09 [Audio Input] wcaps 0x140311: Stereo Digital PCM: rates 0x160, bits 0x0e, types 0x5 Connection: 1 0x11 Node 0x0a [Pin Complex] wcaps 0x400181: Stereo Pincap 0x08173f: IN OUT HP Pin Default 0x02214020: [Jack] HP Out at Ext Front Conn = 1/8, Color = Green Pin-ctls: 0x80: HP Connection: 1 0x02 Node 0x0b [Pin Complex] wcaps 0x400181: Stereo Pincap 0x081737: IN OUT Pin Default 0x01116011: [Jack] Speaker at Ext Rear Conn = 1/8, Color = Orange Pin-ctls: 0x60: IN OUT Connection: 1 0x04 Node 0x0c [Pin Complex] wcaps 0x400181: Stereo Pincap 0x081737: IN OUT Pin Default 0x01114010: [Jack] Speaker at Ext Rear Conn = 1/8, Color = Green Pin-ctls: 0x20: IN Connection: 1 0x03 Node 0x0d [Pin Complex] wcaps 0x400181: Stereo Pincap 0x08173f: IN OUT HP Pin Default 0x02a19050: [Jack] Mic at Ext Front Conn = 1/8, Color = Pink Pin-ctls: 0x40: OUT Connection: 1 0x02 Node 0x0e [Pin Complex] wcaps 0x400081: Stereo Pincap 0x0824: IN Pin Default 0x01813051: [Jack] Line In at Ext Rear Conn = 1/8, Color = Blue Pin-ctls: 0x20: IN Node 0x0f [Pin Complex] wcaps 0x400181: Stereo Pincap 0x0837: IN OUT Pin Default 0x01116012: [Jack] Speaker at Ext Rear Conn = 1/8, Color = Orange Pin-ctls: 0x40: OUT Connection: 1 0x05 Node 0x10 [Pin Complex] wcaps 0x400301: Stereo Digital Pincap 0x0810: OUT Pin Default 0x01451030: [Jack] SPDIF Out at Ext Rear Conn = Optical, Color = Black Pin-ctls: 0x40: OUT Connection: 3 0x08* 0x17 0x19 Node 0x11 [Pin Complex] wcaps 0x430681: Stereo Digital Pincap 0x0810024: IN Pin Default 0x01c51060: [Jack] SPDIF In at Ext Rear Conn = Optical, Color = Black Pin-ctls: 0x00: Power: 0x0 Node 0x12 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out Amp-Out caps: ofs=0x00, nsteps=0x04, stepsize=0x27, mute=0 Amp-Out vals: [0x04 0x04] Connection: 7 0x0e* 0x15 0x0f 0x0b 0x0c 0x0d 0x0a Node 0x13 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out Amp-Out caps: ofs=0x00, nsteps=0x04, stepsize=0x27, mute=0 Amp-Out vals: [0x00 0x00] Connection: 7 0x0e 0x15* 0x0f 0x0b 0x0c 0x0d 0x0a Node 0x14 [Beep Generator Widget] wcaps 0x70000c: Mono Amp-Out Amp-Out caps: ofs=0x03, nsteps=0x03, stepsize=0x17, mute=0 Amp-Out vals: [0x00] Node 0x15 [Pin Complex] wcaps 0x400001: Stereo Pincap 0x0820: IN Pin Default 0x90330052: [Fixed] CD at Int N/A Conn = ATAPI, Color = Unknown Pin-ctls: 0x20: IN Node 0x16 [Volume Knob Widget] wcaps 0x600000: Mono Node 0x17 [Audio Selector] wcaps 0x300903: Stereo Amp-In Amp-In caps: N/A Amp-In vals: [0x0e 0x0e] Connection: 1 0x12 Node 0x18 [Audio Selector] wcaps 0x300903: Stereo Amp-In Amp-In caps: N/A Amp-In vals: [0x80 0x80] Connection: 1 0x13 Node 0x19 [Vendor Defined Widget] wcaps 0xf30201: Stereo Digital Node 0x1a [Audio Output] wcaps 0x30201: Stereo Digital Node 0x1b [Pin Complex] wcaps 0x400301: Stereo Digital Pincap 0x0810: OUT Pin Default 0x90560040: [Fixed] Digital Out at Int N/A Conn = Digital, Color = Unknown Pin-ctls: 0x00: Connection: 1 0x1a ** Affects: linux-source-2.6.15 (Ubuntu) Importance: Untriaged Status: Unconfirmed -- snd_hda_intel driver provides only playback on macbook https://launchpad.net/bugs/59569 From mdz at ubuntu.com Fri Sep 8 23:55:54 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Fri, 08 Sep 2006 23:55:54 -0000 Subject: [Bug 59109] Re: ath0 ERRORS on dapper drake References: <20060906005728.29144.41704.malonedeb@gangotri.ubuntu.com> Message-ID: <20060908235554.12752.72436.malone@gandwana.ubuntu.com> It looks like you may have pasted the wrong information; you sent only "ifconfig" output and not any errors. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Unconfirmed => Needs Info -- ath0 ERRORS on dapper drake https://launchpad.net/bugs/59109 From ubuntu at quinnh.org Sat Sep 9 00:08:34 2006 From: ubuntu at quinnh.org (QuinnHarris) Date: Sat, 09 Sep 2006 00:08:34 -0000 Subject: [Bug 24925] Re: Unlink after no-IRQ References: <20060113143135.21012.9317.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060909000834.16587.27011.malone@gangotri.ubuntu.com> I can verify this problem isn't in 2.6.15-25-386 but is in 2.6.15-26-386 and edgy 2.6.17-7-386. "sudo rmmod ehci_hcd" allows the device to work but at USB 1.1 speeds. This is on an Averatec 3250 laptop. Via south bridge, USB 2.0 PCI ID 1106:3104 -- Unlink after no-IRQ https://launchpad.net/bugs/24925 From ubuntu at quinnh.org Sat Sep 9 00:19:20 2006 From: ubuntu at quinnh.org (QuinnHarris) Date: Sat, 09 Sep 2006 00:19:20 -0000 Subject: [Bug 54273] Re: USB device not accepting address: error -110 References: <20060727175359.29548.78878.malonedeb@gandwana.ubuntu.com> Message-ID: <20060909001920.12796.13048.malone@gandwana.ubuntu.com> USB worked fine in 2.6.15-25-386 but no longer int 2.6.15-26-386 and edgy 2.6.17-7-386. "rmmod ehci_hcd" does allow USB devices to work at 1.1 speeds. This appears to be a duplicate of bug #24925 -- USB device not accepting address: error -110 https://launchpad.net/bugs/54273 From kubuntu at drspirograph.com Sat Sep 9 02:38:13 2006 From: kubuntu at drspirograph.com (DrSpirograph) Date: Sat, 09 Sep 2006 02:38:13 -0000 Subject: [Bug 59596] /dev/rtc Device or resource busy References: <20060909023814.16647.95551.malonedeb@gangotri.ubuntu.com> Message-ID: <20060909023814.16647.95551.malonedeb@gangotri.ubuntu.com> Public bug reported: Binary package hint: linux-image-686 I am unable to use /dev/rtc at all. This is proving to be very problematic for running vmware. I've looked around on google and no one seems to have come up with a solution to this problem. If I try to read from /dev/rtc, even as root, I get opening `/dev/rtc': Device or resource busy I've checked if there are any other processes holding the resource with fuser, but nothing is shown: root at serenity:~# fuser -av /dev/rtc USER PID ACCESS COMMAND /dev/rtc: I'm seeing this occur straight after boot up, there seems to be no way to access the real time clock. I am using Dapper 6.06 My CPU is Intel(R) Celeron(R) M processor 1.60GHz uname -a : Linux serenity 2.6.15-26-686 #1 SMP PREEMPT Thu Aug 3 03:13:28 UTC 2006 i686 GNU/Linux ** Affects: linux-meta (Ubuntu) Importance: Untriaged Status: Unconfirmed -- /dev/rtc Device or resource busy https://launchpad.net/bugs/59596 From tas50 at humboldt.edu Sat Sep 9 03:21:42 2006 From: tas50 at humboldt.edu (tas50) Date: Sat, 09 Sep 2006 03:21:42 -0000 Subject: [Bug 55224] Re: iMac 1.9Ghz: X fails to load under Edgy References: <20060804190745.9299.76640.malonedeb@gandwana.ubuntu.com> Message-ID: <20060909032142.16587.38505.launchpad@gangotri.ubuntu.com> *** This bug is a duplicate of bug 23445 *** ** This bug has been marked a duplicate of bug 23445 iMac G5 will freeze after booting up -- iMac 1.9Ghz: X fails to load under Edgy https://launchpad.net/bugs/55224 From tas50 at humboldt.edu Sat Sep 9 03:21:42 2006 From: tas50 at humboldt.edu (tas50) Date: Sat, 09 Sep 2006 03:21:42 -0000 Subject: [Bug 23445] Re: iMac G5 will freeze after booting up References: <20060113142343.21012.90472.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060909032143.16587.28384.launchpad@gangotri.ubuntu.com> ** Bug 55224 has been marked a duplicate of this bug -- iMac G5 will freeze after booting up https://launchpad.net/bugs/23445 From ben.collins at ubuntu.com Fri Sep 8 15:41:03 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Fri, 08 Sep 2006 15:41:03 -0000 Subject: [Bug 38865] Re: [Bug 38865] Re: sky2 driver freezing system after ifdown and ifup References: <20060409125752.32313.97119.malonedeb@gandwana.ubuntu.com> <20060830122159.17263.98031.malone@gangotri.ubuntu.com> Message-ID: <1157730064.8556.54.camel@grayson.internal.net> On Wed, 2006-08-30 at 12:21 +0000, Albert Vilella wrote: > Hi all, > I've successfully compiled and installed sk98lin. > I added sky2 to the blacklist. > I've added sk98lin to /etc/modules. > After boot up, sk98lin is loaded and sky2 is not. > But no eth0 device appears: I don't know how to bring up the interface. This is pointless. I went to the effort of putting sk98lin into the dapper kernel, compiling it for testing, and posted that URL to this bug report. Matter of fact, it's in the comment right above yours. I did this so I could get some feedback before uploading it for dapper-updates. If no one tests it, I'll have to back it out, which means it may never get put back in. How about someone test it? -- sky2 driver freezing system after ifdown and ifup https://launchpad.net/bugs/38865 From nkbj at mail.tele.dk Sat Sep 9 05:08:37 2006 From: nkbj at mail.tele.dk (Niels Kristian Bech Jensen) Date: Sat, 09 Sep 2006 05:08:37 -0000 Subject: [Bug 58570] Re: kernel_image target fails with kernel 2.6.18-rc References: <20060902121437.30936.48954.malonedeb@gandwana.ubuntu.com> Message-ID: <20060909050837.12752.89174.malone@gandwana.ubuntu.com> I can confirm this getting the error messages described in the upstream bug report. Please consider updating to 10.050. ** Changed in: kernel-package (Ubuntu) Status: Unconfirmed => Confirmed -- kernel_image target fails with kernel 2.6.18-rc https://launchpad.net/bugs/58570 From launchpad at news.mh.hampelnet.de Sat Sep 9 06:35:40 2006 From: launchpad at news.mh.hampelnet.de (Matthias Hampel) Date: Sat, 09 Sep 2006 06:35:40 -0000 Subject: [Bug 38865] Re: sky2 driver freezing system after ifdown and ifup References: <20060409125752.32313.97119.malonedeb@gandwana.ubuntu.com> Message-ID: <20060909063541.12752.21086.malone@gandwana.ubuntu.com> I would like to test your kernel, but I need the -686 version. -- sky2 driver freezing system after ifdown and ifup https://launchpad.net/bugs/38865 From ben.collins at ubuntu.com Sat Sep 9 06:47:40 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Sat, 09 Sep 2006 06:47:40 -0000 Subject: [Bug 38865] Re: [Bug 38865] Re: sky2 driver freezing system after ifdown and ifup References: <20060409125752.32313.97119.malonedeb@gandwana.ubuntu.com> <20060909063541.12752.21086.malone@gandwana.ubuntu.com> Message-ID: On Sep 9, 2006, at 2:35 AM, Matthias Hampel wrote: > I would like to test your kernel, but I need the -686 version. Just use the -386 version for testing. You really don't need the -686 just to tell me if your network card works. -- sky2 driver freezing system after ifdown and ifup https://launchpad.net/bugs/38865 From avilella at gmail.com Sat Sep 9 06:48:06 2006 From: avilella at gmail.com (Albert Vilella) Date: Sat, 09 Sep 2006 06:48:06 -0000 Subject: [Bug 38865] Re: [Bug 38865] Re: sky2 driver freezing system after ifdown and ifup References: <20060409125752.32313.97119.malonedeb@gandwana.ubuntu.com> <20060909063541.12752.21086.malone@gandwana.ubuntu.com> Message-ID: <358f4d650609082348j7da6c52dmfb10394dcea1172e@mail.gmail.com> On 9/9/06, Matthias Hampel wrote: > I would like to test your kernel, but I need the -686 version. same here. > > -- > sky2 driver freezing system after ifdown and ifup > https://launchpad.net/bugs/38865 > -- sky2 driver freezing system after ifdown and ifup https://launchpad.net/bugs/38865 From avilella at gmail.com Sat Sep 9 07:38:01 2006 From: avilella at gmail.com (Albert Vilella) Date: Sat, 09 Sep 2006 07:38:01 -0000 Subject: [Bug 38865] Re: [Bug 38865] Re: [Bug 38865] Re: sky2 driver freezing system after ifdown and ifup References: <20060409125752.32313.97119.malonedeb@gandwana.ubuntu.com> <20060909063541.12752.21086.malone@gandwana.ubuntu.com> Message-ID: <358f4d650609090038j5ff2b1cep7b032744d9fefb33@mail.gmail.com> I have just retried it: 491 wget -b http://people.ubuntu.com/~bcollins/kernels/sk98lin-dapper/linux-image-2.6.15-26-k7_2.6.15-26.47_i386.deb 492 wget -b http://people.ubuntu.com/~bcollins/kernels/sk98lin-dapper/linux-headers-2.6.15-26-386_2.6.15-26.47_i386.deb 493 ll -rt 494 cat wget-log* 495 ll 496 sudo dpkg -i linux-headers-2.6.15-26-386_2.6.15-26.47_i386.deb linux-image-2.6.15-26-k7_2.6.15-26.47_i386.deb 497 grep 2.6.15 /boot/grub/menu.lst 498 sudo shutdown -r now Then it gets stuck and unresponsive at: Uncompressing linux kernel ... Ok, now running the kernel. (or something like that) This is on a Core Duo laptop (http://avilella.googlepages.com/vaiosz) Any ideas? On 9/9/06, Ben Collins wrote: > > On Sep 9, 2006, at 2:35 AM, Matthias Hampel wrote: > > > I would like to test your kernel, but I need the -686 version. > > Just use the -386 version for testing. You really don't need the -686 > just to tell me if your network card works. > > -- > sky2 driver freezing system after ifdown and ifup > https://launchpad.net/bugs/38865 > -- sky2 driver freezing system after ifdown and ifup https://launchpad.net/bugs/38865 From kaposi.ambrus at gmail.com Sat Sep 9 08:45:48 2006 From: kaposi.ambrus at gmail.com (akaposi) Date: Sat, 09 Sep 2006 08:45:48 -0000 Subject: [Bug 38865] Re: sky2 driver freezing system after ifdown and ifup References: <20060409125752.32313.97119.malonedeb@gandwana.ubuntu.com> Message-ID: <20060909084548.12796.61238.malone@gandwana.ubuntu.com> On 08/09/06 19:10 -0000, Ben Collins wrote: > Well, no one tested my kernels. I could just back out the fix because of > that, but instead I'll leave it in, and just hope it works. There is a 386 headers package and a k7 kernel image in the http://people.ubuntu.com/~bcollins/kernels/sk98lin-dapper/ directory but I need a 386 kernel image to test it. Am I wrong? I installed the header image and downloaded the sk98lin kernel module from www.marvell.com, and now my 88E8036 chip is working better (I'm able to copy large files etc), albeit sometimes it reports "Port A failed" in dmesg and I have to reboot to get it work again. Google doesn't find anybody who had the same problem before. -- sky2 driver freezing system after ifdown and ifup https://launchpad.net/bugs/38865 From launchpad.net at rolf.leggewie.biz Sat Sep 9 09:38:16 2006 From: launchpad.net at rolf.leggewie.biz (Rolf Leggewie) Date: Sat, 09 Sep 2006 09:38:16 -0000 Subject: [Bug 32237] Re: System hang when creating file system during install References: <20060221062621.1427.71825.malonedeb@gangotri.ubuntu.com> Message-ID: <20060909093816.12752.52609.malone@gandwana.ubuntu.com> Please forgive me for hijacking this bug, but clicking on the link to "Report a bug in debian-installer" which I was told in another page is where I should report my bug goes to a page telling me that d-i does not user Malone. https://launchpad.net/products/debian-installer/+filebug goes on that I should use the official bug tracker but does not mention where it is. So basically, this comes across as a "F*ck off and don't bother us" message. Please add d-i to Malone so ppl can report bugs. How did the three bugs that are in the tracker now ever get reported? Anyways, on to my problem. It is some failure in parted which I reported in bug 59620. D-i's part in it is that said bug should not be able to bring the installation process to a complete halt at least in my case where all partitions are already laid out. -- System hang when creating file system during install https://launchpad.net/bugs/32237 From tom at devcore.de Sat Sep 9 10:10:09 2006 From: tom at devcore.de (el3ktro) Date: Sat, 09 Sep 2006 10:10:09 -0000 Subject: [Bug 59627] Intel Core Duo 50% load with powernowd running References: <20060909101009.16647.86796.malonedeb@gangotri.ubuntu.com> Message-ID: <20060909101009.16647.86796.malonedeb@gangotri.ubuntu.com> Public bug reported: I have an Averatec 2460 with Intel Core Duo T2300, Intel 945GM chipset. When powernowd is running on an 2.6.15-26-686 kernel both CPUs have a constant load of around 50%, the fan is always on. The system sometimes lags a little. Top or gnome-system-monitor don't show any processes consuming so much CPU time. When I stop powernowd and powernowd.early then CPU load drops to around 5-8% on both CPUs which still is somewhat high but much better. ** Affects: linux-source-2.6.15 (Ubuntu) Importance: Untriaged Status: Unconfirmed -- Intel Core Duo 50% load with powernowd running https://launchpad.net/bugs/59627 From tom at devcore.de Sat Sep 9 10:06:01 2006 From: tom at devcore.de (el3ktro) Date: Sat, 09 Sep 2006 10:06:01 -0000 Subject: [Bug 59626] Ubuntu Dapper can't be installed References: <20060909100601.16587.85529.malonedeb@gangotri.ubuntu.com> Message-ID: <20060909100601.16587.85529.malonedeb@gangotri.ubuntu.com> Public bug reported: Binary package hint: kernel-image-2.6.15-26-386-di I have an Averatec 2460, Intel Core Duo, Intel 945GM chipset, Intel GMA 950 graphics, onboard Realtek 8139 NIC. Ubuntu and many other distros fail to install, it hangs at hardware detection. I managed to install Breezy and upgrade to Dapper. The Dapper kernel (2.6.15-26) won't boot. The reason is the 8139too module used for the NIC. If I re-compile the Dapper kernel and the 8139too module with "Use PIO instead of MMIO" set then it works. This is a serious bug because a single module prevents Dapper from installing at all! ** Affects: linux-source-2.6.15 (Ubuntu) Importance: Untriaged Status: Unconfirmed -- Ubuntu Dapper can't be installed https://launchpad.net/bugs/59626 From dragonroot at gmail.com Sat Sep 9 10:16:32 2006 From: dragonroot at gmail.com (Konstantin Isakov) Date: Sat, 09 Sep 2006 10:16:32 -0000 Subject: [Bug 43745] The solution to resume the clock References: <20060509053346.20684.57755.malonedeb@gangotri.ubuntu.com> Message-ID: <20060909101632.12796.62733.malone@gandwana.ubuntu.com> Stumbled upon the same problem. I have a Sony Vaio SZ250P notebook. Something ugly happened (sky2 ethernet fault?), got a kernel panic, and after reboot I started to have that 'select() to /dev/rtc to wait for clock tick timed out' messages, which were persistent across reboots. After a bit of investigating, I found out that my RTC clock had just stopped counting -- it had frozen on some particular time moment and just was not updating anymore. Removing the battery from the notebook wasn't helpful -- it seemed like these notebooks had a separate coin- cell battery inside. Since the device was on warranty and I was too lazy to get myself to service and had the device opened and battery removed there, I started to tinker with the RTC clock CMOS registers, and finally found a way to resume the clock from software, without any physical intervention. The RTC has a 'disable update' bit -- it is sufficient to set it first, and then to clear it again. I'm attaching a simple C program that does just that. Compile it with 'gcc rtc-resume.c -o rtc-resume', and then run './rtc-resume' as root. Hope this helps. Still no understanding on why that happened, but at least a simple way to fix it when it happens. ** Attachment added: "A program to resume RTC clock" http://librarian.launchpad.net/4207439/rtc-resume.c -- Ubuntu corrupts real time clock on some dell laptops https://launchpad.net/bugs/43745 From dean at deansas.org Sat Sep 9 11:36:03 2006 From: dean at deansas.org (Dean Sas) Date: Sat, 09 Sep 2006 11:36:03 -0000 Subject: [Bug 59596] Re: /dev/rtc Device or resource busy References: <20060909023814.16647.95551.malonedeb@gangotri.ubuntu.com> Message-ID: <20060909113603.12796.23547.launchpad@gandwana.ubuntu.com> ** Changed in: linux-meta (Ubuntu) Sourcepackagename: linux-meta => linux-source-2.6.15 -- /dev/rtc Device or resource busy https://launchpad.net/bugs/59596 From dean at deansas.org Sat Sep 9 11:35:09 2006 From: dean at deansas.org (Dean Sas) Date: Sat, 09 Sep 2006 11:35:09 -0000 Subject: [Bug 59099] Re: No boot with USB DVD drive References: <20060905231738.3933.6768.malonedeb@gandwana.ubuntu.com> Message-ID: <20060909113509.16587.7692.malone@gangotri.ubuntu.com> Coffee, what kernel do you use? You can get the results by giving the output of uname -a ** Changed in: linux-meta (Ubuntu) Status: Unconfirmed => Needs Info -- No boot with USB DVD drive https://launchpad.net/bugs/59099 From kaizoku.alucard at gmail.com Sat Sep 9 14:06:54 2006 From: kaizoku.alucard at gmail.com (coffee) Date: Sat, 09 Sep 2006 14:06:54 -0000 Subject: [Bug 59099] Re: No boot with USB DVD drive References: <20060905231738.3933.6768.malonedeb@gandwana.ubuntu.com> Message-ID: <20060909140654.12752.21233.malone@gandwana.ubuntu.com> I use the last 686 ubuntu kernel image (I have a celeron): Linux antre 2.6.15-26-686 #1 SMP PREEMPT Thu Aug 3 03:13:28 UTC 2006 i686 GNU/Linux But I got the same problem with the 386 image Linux antre 2.6.15-26-386 #1 PREEMPT Thu Aug 3 02:52:00 UTC 2006 i686 GNU/Linux -- No boot with USB DVD drive https://launchpad.net/bugs/59099 From dean at deansas.org Sat Sep 9 15:08:47 2006 From: dean at deansas.org (Dean Sas) Date: Sat, 09 Sep 2006 15:08:47 -0000 Subject: [Bug 59099] Re: No boot with USB DVD drive References: <20060905231738.3933.6768.malonedeb@gandwana.ubuntu.com> Message-ID: <20060909150847.12796.72248.launchpad@gandwana.ubuntu.com> ** Changed in: linux-meta (Ubuntu) Sourcepackagename: linux-meta => linux-source-2.6.15 -- No boot with USB DVD drive https://launchpad.net/bugs/59099 From adam.skogman at jayway.se Sat Sep 9 16:33:35 2006 From: adam.skogman at jayway.se (Adam Skogman) Date: Sat, 09 Sep 2006 16:33:35 -0000 Subject: [Bug 35788] Re: panic on boot with 2.6.15-18-amd64-generic References: <20060320224342.22884.40303.malonedeb@gangotri.ubuntu.com> Message-ID: <20060909163335.16587.55404.malone@gangotri.ubuntu.com> I had the very same problem on an IBM x326m 7969-67Y, which is a dual opteron 275. Removing the Remote Supervisor Adapter II fixed the boot problem. The card is what IBM calls a Baseboard Management Controller, an MS-9549 PCI card. However, then fan controll stopped working :-( I seem to be having some problems with iommu too, and when enabling earlyprintk=vga it stops right after having complained about not having an aperture. -- panic on boot with 2.6.15-18-amd64-generic https://launchpad.net/bugs/35788 From feenixx at hotmail.com Sat Sep 9 16:59:47 2006 From: feenixx at hotmail.com (mlind) Date: Sat, 09 Sep 2006 16:59:47 -0000 Subject: [Bug 59350] Re: [Edgy] Please Sync ndiswrapper-source 1.23-1 from Debian unstable References: <20060907141936.12796.85334.malonedeb@gandwana.ubuntu.com> Message-ID: <20060909165947.16587.18482.malone@gangotri.ubuntu.com> Sorry, I overlooked the Ubuntu specific changes. These should be included: ndiswrapper (1.8-0ubuntu2) dapper; urgency=low * Stop depending on ndiswrapper-modules - we ship the module in our kernel package. -- Matthew Garrett Thu, 2 Feb 2006 05:46:19 +0000 ndiswrapper (1.1-4ubuntu2) breezy; urgency=low * debian/control: Update description to point out that the kernel source package is not required with the standard Ubuntu kernel. -- Martin Pitt Fri, 30 Sep 2005 14:56:14 +0200 ndiswrapper (1.1-4ubuntu1) breezy; urgency=low * debian/ndiswrapper-utils.dirs - add /etc/ndiswrapper (ubuntu #13809) -- Charles Majola Mon, 22 Aug 2005 13:51:35 +0200 Merging other changes are trivial, except 1.8-0ubuntu2. Someone with proper knowledge should look if that change can be dropped or not. ** Attachment added: "debdiff.diff" http://librarian.launchpad.net/4208282/ndiswrapper.diff -- [Edgy] Please Sync ndiswrapper-source 1.23-1 from Debian unstable https://launchpad.net/bugs/59350 From samuel_chenal at yahoo.fr Sat Sep 9 17:05:09 2006 From: samuel_chenal at yahoo.fr (Sam) Date: Sat, 09 Sep 2006 17:05:09 -0000 Subject: [Bug 20062] Re: Keyboard non-responsive when using kernel 2.6.12 (breezy) References: <20060113140508.21012.73082.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060909170509.16647.39738.malone@gangotri.ubuntu.com> Hello, Sorry for my late reply. Here is the dmesg (see attached). # cat /proc/version Linux version 2.6.12-10-686-smp (buildd at terranova) (gcc version 3.4.5 20050809 (prerelease) (Ubuntu 3.4.4-6ubuntu8.1)) #1 SMP Tue Jul 18 23:03:01 UTC 2006 So I can use the 686-smp kernel, but I have to play with the numlock key during the kernel load (see above). I keep on searching on the web and I will post the solution if I find any. Regards, Sam ** Attachment added: "dmesg output" http://librarian.launchpad.net/4208293/dmesg.log -- Keyboard non-responsive when using kernel 2.6.12 (breezy) https://launchpad.net/bugs/20062 From jonesml at fastmail.to Sat Sep 9 20:51:11 2006 From: jonesml at fastmail.to (Michael-Luke Jones) Date: Sat, 09 Sep 2006 20:51:11 -0000 Subject: [Bug 59696] Asus Pundit-R SATA only supports 33MBps operation References: <20060909205111.12752.57194.malonedeb@gandwana.ubuntu.com> Message-ID: <20060909205111.12752.57194.malonedeb@gandwana.ubuntu.com> Public bug reported: I have been running Gentoo on an Asus Pundit-R with an SATA hard drive. The SATA support on this barebones' motherboard is from an onboard IDE to SATA converter, with the result that the SATA drive appears as /dev/hdc on the IDE bus. The problem seems to be caused by the incorrect detection of a 40 pin ATA cable, thus limiting the transfer speed to Ultra ATA 33. The following patch allows detection of when an SATA converter is being used, and is incorporated into the 2.6.18 source tree, but is not present in either the Edgy or Dapper kernel. http://www.kernel.org/git/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commitdiff;h=1a1276e7b6cba549553285f74e87f702bfff6fac Since kernel version 2.6.14, I have been using my own patch (which does essentially the same thing), but I would like to switch to Ubuntu on this machine and do not want to have to manually patch the kernel, each time an update is released :) I'm sure this can be committed to the Edgy kernel, and if it could be applied to the Dapper kernel I would really appreciate it - the structure of this part of the ide-iops.c file has not changed for many kernel versions. Thanks for your help, Michael-Luke Jones ** Affects: linux-source-2.6.15 (Ubuntu) Importance: Untriaged Status: Unconfirmed ** Affects: linux-source-2.6.17 (Ubuntu) Importance: Untriaged Status: Unconfirmed ** Also affects: linux-source-2.6.15 (Ubuntu) Importance: Untriaged Status: Unconfirmed -- Asus Pundit-R SATA only supports 33MBps operation https://launchpad.net/bugs/59696 From tanertopal at gmx.de Sat Sep 9 22:50:47 2006 From: tanertopal at gmx.de (Ramosis) Date: Sat, 09 Sep 2006 22:50:47 -0000 Subject: [Bug 38263] Re: freeze at startup References: <20060405194706.24486.46138.malonedeb@gangotri.ubuntu.com> Message-ID: <20060909225047.16587.1025.malone@gangotri.ubuntu.com> I have the same problem as some other peopel in this thread. If i am try to install dapper i get this message: Uncompressing Linux... Ok, bootin the Kernel. [17179571.480000].. MP-BIOS bug: 8254 timer not connected to IO-APIC [17179571.860000] PCI: Cannot allocate resource region 3 of device 0000:00:00.0 If i am start with "acpi=off" (or a similar bootoption) i get only the third message. I've tried lot of other bootoptions but nothing has an positiv effekt. My Motherboard: Asus P4RD1 with a *******Ati Xpress 200 onboard graphic -- freeze at startup https://launchpad.net/bugs/38263 From tanertopal at gmx.de Sat Sep 9 22:56:20 2006 From: tanertopal at gmx.de (Ramosis) Date: Sat, 09 Sep 2006 22:56:20 -0000 Subject: [Bug 38263] Re: freeze at startup References: <20060405194706.24486.46138.malonedeb@gangotri.ubuntu.com> Message-ID: <20060909225620.16647.85978.launchpad@gangotri.ubuntu.com> ** Changed in: linux-source-2.6.17 (Ubuntu) Assignee: (unassigned) => Ramosis ** Changed in: linux-source-2.6.17 (Ubuntu) Assignee: Ramosis => (unassigned) -- freeze at startup https://launchpad.net/bugs/38263 From launchpad at lbedford.org Sat Sep 9 23:53:37 2006 From: launchpad at lbedford.org (Liam Bedford) Date: Sat, 09 Sep 2006 23:53:37 -0000 Subject: [Bug 55138] Re: Dell 2950 w/ PERC 5i/Integrated, seeing RAID'd HDD's References: <20060804030427.9092.4602.malonedeb@gangotri.ubuntu.com> Message-ID: <20060909235337.16587.55806.malone@gangotri.ubuntu.com> any progress? this bug is causing installs on 2950s to be broken, and dell have EOL'd the 2850. L. -- Dell 2950 w/ PERC 5i/Integrated, seeing RAID'd HDD's https://launchpad.net/bugs/55138 From nmelay at ifrance.com Sun Sep 10 01:07:14 2006 From: nmelay at ifrance.com (Nicolas Melay) Date: Sun, 10 Sep 2006 01:07:14 -0000 Subject: [Bug 36322] Re: No firmware for mrv8k References: <20060323231357.18295.12928.malonedeb@gandwana.ubuntu.com> Message-ID: <20060910010714.16647.75031.malone@gangotri.ubuntu.com> This driver is a work in progress. It's still unfinished, it just does NOT work and should never have made it into Ubuntu's kernel. Even the author told me so, and now his web page says it's alpha work (and he means it). Please remove it. -- No firmware for mrv8k https://launchpad.net/bugs/36322 From stevenrwalter at gmail.com Sun Sep 10 02:24:34 2006 From: stevenrwalter at gmail.com (Steven Walter) Date: Sun, 10 Sep 2006 02:24:34 -0000 Subject: [Bug 57625] Re: at76c503 driver won't send in ad-hoc mode References: <20060824204255.5577.95194.malonedeb@gandwana.ubuntu.com> Message-ID: <20060910022434.16587.39261.malone@gangotri.ubuntu.com> I wanted to report that the problem also exists in the latest Edgy kernel. My fix resolves the bug there, too. -- at76c503 driver won't send in ad-hoc mode https://launchpad.net/bugs/57625 From djvasi at gmail.com Sun Sep 10 06:45:08 2006 From: djvasi at gmail.com (Dave Vasilevsky) Date: Sun, 10 Sep 2006 06:45:08 -0000 Subject: [Bug 59734] offb consoles are blank References: <20060910064508.16587.45253.malonedeb@gangotri.ubuntu.com> Message-ID: <20060910064508.16587.45253.malonedeb@gangotri.ubuntu.com> Public bug reported: Binary package hint: linux-image-2.6.15-26-powerpc When the Open Firmware framebuffer (offb) is used, the splash screen does not appear on my computer--instead there is only a white screen. In graphical runlevels Xorg eventually launches and displays fine, but the virtual consoles are blank and unworking. Using rivafb works perfectly, displaying the splash and VTs. Unfortunately I cannot convince the kernel to use it, without recompiling the kernel. The kernel parameters video=riva or video=rivafb should work, perhaps the module needs to be in the initrd for that? My computer is an Apple G4 Quicksilver, specs here: http://apple- history.com/?model=g4_quicksilver . All components are stock except for upgraded RAM. ** Affects: linux-source-2.6.15 (Ubuntu) Importance: Untriaged Status: Unconfirmed -- offb consoles are blank https://launchpad.net/bugs/59734 From djvasi at gmail.com Sun Sep 10 06:45:47 2006 From: djvasi at gmail.com (Dave Vasilevsky) Date: Sun, 10 Sep 2006 06:45:47 -0000 Subject: [Bug 59734] Re: offb consoles are blank References: <20060910064508.16587.45253.malonedeb@gangotri.ubuntu.com> Message-ID: <20060910064547.12796.96606.malone@gandwana.ubuntu.com> Bug applies to Dapper Drake. I'll test with Edgy. -- offb consoles are blank https://launchpad.net/bugs/59734 From djvasi at gmail.com Sun Sep 10 07:12:14 2006 From: djvasi at gmail.com (Dave Vasilevsky) Date: Sun, 10 Sep 2006 07:12:14 -0000 Subject: [Bug 59734] Re: offb consoles are blank References: <20060910064508.16587.45253.malonedeb@gangotri.ubuntu.com> Message-ID: <20060910071214.16587.96977.malone@gangotri.ubuntu.com> Tested with the daily Kubuntu Edgy, bug still occurs. -- offb consoles are blank https://launchpad.net/bugs/59734 From mascha at ma-scha.de Sun Sep 10 08:34:15 2006 From: mascha at ma-scha.de (Martin Schaaf) Date: Sun, 10 Sep 2006 08:34:15 -0000 Subject: [Bug 42023] Re: Erros on writing and reading a dvd-ram References: <20060429095912.30638.41865.malonedeb@gangotri.ubuntu.com> Message-ID: <20060910083415.12796.59217.malone@gandwana.ubuntu.com> With readcd I can read in a complete DVD-ROM where before dvdread says can't seek to block. If I mount this iso image then as a loop device I can play this dvd without problem. Is this a problem in libdvdread? -- Erros on writing and reading a dvd-ram https://launchpad.net/bugs/42023 From christian.mayrhuber at gmx.net Sun Sep 10 09:24:42 2006 From: christian.mayrhuber at gmx.net (Christian Mayrhuber) Date: Sun, 10 Sep 2006 09:24:42 -0000 Subject: [Bug 53754] Re: ata_piix problem with Intel ICH7 chipset References: <20060722182526.11213.79901.malonedeb@gandwana.ubuntu.com> Message-ID: <20060910092442.12752.98765.malone@gandwana.ubuntu.com> This bug seems to be a duplicate of [Bug 38760] Re: ata timeout with sony vgn-s580 laptop I don't know why but those SATA timeout messages occur less frequently for me if I add the ahci module to /etc/modules. Acer Aspire 9412WLMI Kubuntu Dapper with latest security updates. ii linux-image-2.6.15-26-686 2.6.15-26.46 ii linux-restricted-modules-686 2.6.15.24 ii nvidia-kernel-common 20051028+1 ii nvidia-glx 1.0.8762+2.6.15.11-3 I had to add the boot parameters "video=vga16fb:off video=vesafb:off" to prevent hard lockups due to bad interaction of nvidia and framebuffer drivers. Hibernation, neither suspend to disk, nor suspend to RAM, works for me at all. The laptop just freezes with a black screen. I tried KPowersafe and KLaptop with the same results. -- ata_piix problem with Intel ICH7 chipset https://launchpad.net/bugs/53754 From clemens at heesenet.de Sun Sep 10 11:51:12 2006 From: clemens at heesenet.de (Clemens Heese) Date: Sun, 10 Sep 2006 11:51:12 -0000 Subject: [Bug 23445] Re: iMac G5 will freeze after booting up References: <20060113142343.21012.90472.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060910115112.16647.72766.malone@gangotri.ubuntu.com> thanks a lot! i will try this in a few days an report here. -- iMac G5 will freeze after booting up https://launchpad.net/bugs/23445 From jonesml at fastmail.to Sun Sep 10 16:04:23 2006 From: jonesml at fastmail.to (Michael-Luke Jones) Date: Sun, 10 Sep 2006 16:04:23 -0000 Subject: [Bug 59696] Re: Asus Pundit-R SATA only supports 33MBps operation References: <20060909205111.12752.57194.malonedeb@gandwana.ubuntu.com> Message-ID: <20060910160424.12796.30225.malone@gandwana.ubuntu.com> The patch included below applies cleanly to both the Dapper and Edgy kernels present in the kernel.org git repository. It has also been submitted to the stable kernel team for inclusion in 2.6.17.14. ** Attachment added: "Patch for both Dapper and Edgy Git Kernels" http://librarian.launchpad.net/4213511/ide-iops-satafix.patch -- Asus Pundit-R SATA only supports 33MBps operation https://launchpad.net/bugs/59696 From mjg59 at codon.org.uk Sun Sep 10 16:58:22 2006 From: mjg59 at codon.org.uk (Matthew Garrett) Date: Sun, 10 Sep 2006 16:58:22 -0000 Subject: [Bug 38263] Re: freeze at startup References: <20060405194706.24486.46138.malonedeb@gangotri.ubuntu.com> Message-ID: <20060910165823.12796.5563.malone@gandwana.ubuntu.com> Could people who are hitting this on edgy please try the following two kernel parameters (one at a time and both together) acpi_skip_timer_override enable_8254_timer and let me know if they change anything? It would be especially helpful to know if enable_8254_timer makes your clock run twice as fast as it should. -- freeze at startup https://launchpad.net/bugs/38263 From joachim at kom.aau.dk Sun Sep 10 18:14:15 2006 From: joachim at kom.aau.dk (JDahl) Date: Sun, 10 Sep 2006 18:14:15 -0000 Subject: [Bug 38263] Re: freeze at startup References: <20060405194706.24486.46138.malonedeb@gangotri.ubuntu.com> Message-ID: <20060910181415.12796.36530.malone@gandwana.ubuntu.com> Both boot-options removes the freeze at first, and I get to the next installation stage with the graphical splash, where the installation hangs at "mounting live-user" or similar. The first boot-option produces the output at tty0: cannot allocate region 3 of device 0000:00:00.0 and the second boot-option produces: MP-BIOS bug: 8254 timer not connected to IO-APIC cannot allocate region 3 of device 0000:00:00.0 -- freeze at startup https://launchpad.net/bugs/38263 From mjg59 at codon.org.uk Sun Sep 10 18:28:29 2006 From: mjg59 at codon.org.uk (Matthew Garrett) Date: Sun, 10 Sep 2006 18:28:29 -0000 Subject: [Bug 38263] Re: freeze at startup References: <20060405194706.24486.46138.malonedeb@gangotri.ubuntu.com> Message-ID: <20060910182829.12752.35858.malone@gandwana.ubuntu.com> Ok. Can you boot with the acpi_skip_timer_override argument and without the splash argument, then see what happens? -- freeze at startup https://launchpad.net/bugs/38263 From burhan.khalid at gmail.com Sun Sep 10 21:02:13 2006 From: burhan.khalid at gmail.com (BurhanKhalid) Date: Sun, 10 Sep 2006 21:02:13 -0000 Subject: [Bug 37291] Re: NETDEV_TX_BUSY returned when (re)loading driver References: <20060330075920.6253.48234.malonedeb@gandwana.ubuntu.com> Message-ID: <20060910210213.16587.82536.malone@gangotri.ubuntu.com> This problem exists even with the latest updates to Dapper: 2.6.15-26-686 #1 SMP PREEMPT Thu Aug 3 03:13:28 UTC 2006 i686 GNU/Linux Error(s): ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.1.1 ipw2200: Copyright(c) 2003-2006 Intel Corporation Warning: PCI driver ipw2200 has a struct device_driver shutdow n method, please update! ipw2200: Detected Intel PRO/Wireless 2915ABG Network Connection eth1: NETDEV_TX_BUSY returned; driver should report queue full via ieee_device->is_queue_full. This is causing me some problems as network connections will drop. -- NETDEV_TX_BUSY returned when (re)loading driver https://launchpad.net/bugs/37291 From David.Whyte at Gmail.com Mon Sep 11 07:20:26 2006 From: David.Whyte at Gmail.com (DavidWhyte) Date: Mon, 11 Sep 2006 07:20:26 -0000 Subject: [Bug 52649] Re: VIA IRQ quirk changes in 2.6.15-26.44 have broken various VIA devices References: <20060711150321.27257.34756.malonedeb@gangotri.ubuntu.com> Message-ID: <20060911072026.12796.69860.malone@gandwana.ubuntu.com> Hi, It has been a while since there were any updates to this bug and also it is yet to be triaged. Given Ben suggested staying with the 386 kernel I am curious as to when a new version will be available without the sound issues. Are there any ideas? Cheers, Whytey -- VIA IRQ quirk changes in 2.6.15-26.44 have broken various VIA devices https://launchpad.net/bugs/52649 From crimsun at fungus.sh.nu Mon Sep 11 07:38:06 2006 From: crimsun at fungus.sh.nu (Daniel T Chen) Date: Mon, 11 Sep 2006 07:38:06 -0000 Subject: [Bug 59350] Re: [Edgy] Please Sync ndiswrapper-source 1.23-1 from Debian unstable References: <20060907141936.12796.85334.malonedeb@gandwana.ubuntu.com> Message-ID: <20060911073806.16647.49394.malone@gangotri.ubuntu.com> ndiswrapper | 1.18-1ubuntu1 | http://archive.ubuntu.com edgy/main Sources A sync request is invalid (not universe, past UVF). You will need to file a UVF exception request. ** Changed in: ndiswrapper (Ubuntu) Importance: Untriaged => Wishlist Status: Unconfirmed => Rejected -- [Edgy] Please Sync ndiswrapper-source 1.23-1 from Debian unstable https://launchpad.net/bugs/59350 From mgpoolman at brookes.ac.uk Mon Sep 11 08:54:04 2006 From: mgpoolman at brookes.ac.uk (Mark Poolman) Date: Mon, 11 Sep 2006 08:54:04 -0000 Subject: [Bug 59505] Re: rf_kill problem on thinkpad Z60m References: <20060908111540.16587.82249.malonedeb@gangotri.ubuntu.com> Message-ID: <20060911085404.12752.83241.malone@gandwana.ubuntu.com> OK, very sorry, it's not a driver bug, I'd accidently moved a small slider on the front of the case which duplicates Fn/F5. Although I feel a bit silly about it, it's a truly awful piece of ergonomics: a black switch on a background located in a position that you can't see, but can easily brush against, that duplicates and over-rides another more visible control with equivalent function, and is not mentioned anywhere in the paper documentation (at least that I received). Is there any possiblity of enhancing the driver to ignore or overide it (or at least put a message in the logs) ? I can't believe that I'm the only person whose going to get caught out by this - or maybe I am ... :-( Thanks for the attention, -- rf_kill problem on thinkpad Z60m https://launchpad.net/bugs/59505 From tristan.anderson at censeoit.com Mon Sep 11 10:08:10 2006 From: tristan.anderson at censeoit.com (Tristan) Date: Mon, 11 Sep 2006 10:08:10 -0000 Subject: [Bug 59795] Ubiquity crashes 6.06 on Installation References: <20060910161317.16587.88598.malonedeb@gangotri.ubuntu.com> Message-ID: <20060911100810.12796.22596.launchpad@canonical@gandwana.ubuntu.com> Public bug reported: When trying to install ubuntu the installation fails and is aborted. steps taken to verify that this is not a bug CD crc checked md5 checksum matches and is fine Mem test performed and is also fine hardware runs fine on windows xp the only reason Im fileing this bug report is because of the hardware that is being run is not "mainstream" and may not have been encountered before. system specs are as follows this is a via mini itx board SYSTEM System Manufacturer: VIA Technologies, Inc. System Model: VT8623-8235 BIOS: Phoenix - AwardBIOS v6.00PG Processor: VIA Nehemiah, MMX, ~1.0GHz Memory: 512MB RAM ONBOARD GRAPHICS Card name: VIA/S3G UniChrome IGP Manufacturer: VIA/S3G Chip type: VIA/S3G UniChrome IGP DAC type: Internal Device Key: Enum\PCI\VEN_1106&DEV_3122&SUBSYS_31221106&REV_03 Display Memory: 32.0 MB Current Mode: 640 x 480 (32 bit) (60Hz) Monitor: Generic Television Monitor Max Res: 640,480 SOUND ------------- Description: Vinyl AC'97 Audio (WAVE) Default Sound Playback: Yes Default Voice Playback: Yes Hardware ID: PCI\VEN_1106&DEV_3059&SUBSYS_AA011106&REV_50 the file info from the error is below Traceback (most recent call last): File "/usr/bin/ubiquity", line 130, in ? install(sys.argv[1]) File "/usr/bin/ubiquity", line 55, in install ret = wizard.run() File "/usr/lib/python2.4/site-packages/ubiquity/frontend/gtkui.py", line 264, in run self.progress_loop() File "/usr/lib/python2.4/site-packages/ubiquity/frontend/gtkui.py", line 550, in progress_loop raise RuntimeError, ("Install failed with exit code %s\n%s" % RuntimeError: Install failed with exit code 1 Traceback (most recent call last): File "/usr/share/ubiquity/install.py", line 1263, in ? if install.run(): File "/usr/share/ubiquity/install.py", line 284, in run if not self.copy_all(): File "/usr/share/ubiquity/install.py", line 504, in copy_all os.utime(directory, (atime, mtime)) OSError: [Errno 2] No such file or directory: '/target/usr/lib/libglade/2.0' any questions regarding this please feel free to contact me tristan.anderson@ N-O SPAM .censeoit.com ** Affects: linux-source-2.6.15 (Ubuntu) Importance: Untriaged Assignee: Colin Watson Status: Unconfirmed -- Ubiquity crashes 6.06 on Installation https://launchpad.net/bugs/59795 From cjwatson at canonical.com Mon Sep 11 10:08:09 2006 From: cjwatson at canonical.com (Colin Watson) Date: Mon, 11 Sep 2006 10:08:09 -0000 Subject: [Bug 59795] Re: Ubiquity crashes 6.06 on Installation References: <20060910161317.16587.88598.malonedeb@gangotri.ubuntu.com> Message-ID: <20060911100809.12796.3713.malone@gandwana.ubuntu.com> Well, that message indicates that a directory doesn't exist even though it's just been created on the hard disk, so if your hardware is working fine on Windows then I can only conclude that this is a kernel bug of some kind. Please attach /var/log/syslog so that we have a better chance of tracking this down. ** Changed in: ubiquity (Ubuntu) Sourcepackagename: ubiquity => linux-source-2.6.15 Assignee: (unassigned) => Colin Watson -- Ubiquity crashes 6.06 on Installation https://launchpad.net/bugs/59795 From hc.brugmans at hiddenwolf.org Mon Sep 11 10:54:07 2006 From: hc.brugmans at hiddenwolf.org (Hidde Brugmans) Date: Mon, 11 Sep 2006 10:54:07 -0000 Subject: [Bug 58969] Re: no sound bt878 References: <20060905061440.23028.62598.malonedeb@gangotri.ubuntu.com> Message-ID: <20060911105407.16647.11261.launchpad@gangotri.ubuntu.com> *** This bug is a duplicate of bug 29789 *** ** This bug has been marked a duplicate of bug 29789 tv card audio not working -- no sound bt878 https://launchpad.net/bugs/58969 From hc.brugmans at hiddenwolf.org Mon Sep 11 10:55:48 2006 From: hc.brugmans at hiddenwolf.org (Hidde Brugmans) Date: Mon, 11 Sep 2006 10:55:48 -0000 Subject: [Bug 29789] Re: tv card audio not working References: <20060126170552.26274.32755.malonedeb@gangotri.ubuntu.com> Message-ID: <20060911105548.16587.61727.malone@gangotri.ubuntu.com> Same bug, still present in current edgy ** Bug 58969 has been marked a duplicate of this bug ** Also affects: linux-source-2.6.17 (Ubuntu) Importance: Untriaged Status: Unconfirmed ** Changed in: linux-source-2.6.17 (Ubuntu) Status: Unconfirmed => Needs Info -- tv card audio not working https://launchpad.net/bugs/29789 From philipwyett at blueyonder.co.uk Mon Sep 11 11:21:59 2006 From: philipwyett at blueyonder.co.uk (Philip Wyett) Date: Mon, 11 Sep 2006 11:21:59 -0000 Subject: [Bug 50588] Re: Slow boot time since update to kernel 2.6.15-25-686 References: <20060621173616.23311.67847.malonedeb@gangotri.ubuntu.com> Message-ID: <20060911112159.16587.71588.malone@gangotri.ubuntu.com> I have this same issue on Sony Vaio VGN-FS415M when running: 2.6.15-26-686 #1 SMP PREEMPT Thu Aug 3 03:13:28 UTC 2006 i686 GNU/Linux As well as the long pause mounting the root file system, I also see the following issues. * Slow execution of 2d redraw when executing apps like Gnome terminal * Different scaling over 386 kernel that pushed temperature of lappy up on average by 5 degrees celcius. Using bittorrent pushed scaling up to 100% whereas it doesn't on 386 kernel. * Choppy video playback. None of the above issues exist when using the 386 variant of the kernel. -- Slow boot time since update to kernel 2.6.15-25-686 https://launchpad.net/bugs/50588 From wenzhuo at zhmail.com Mon Sep 11 12:36:03 2006 From: wenzhuo at zhmail.com (Wenzhuo Zhang) Date: Mon, 11 Sep 2006 12:36:03 -0000 Subject: [Bug 36596] Re: system freeze after clicking task manager trash icon in "pan" newsreader References: <20060325145711.6279.38615.malonedeb@gandwana.ubuntu.com> Message-ID: <20060911123603.16647.24582.malone@gangotri.ubuntu.com> ThinkPad X32 also has ATI Mobility Radeon M6 LY. I added "RenderAccel 0" to my xorg.conf on Sept. 5, and a lockup occurred this afternoon. I'll have to say this workaround does not work for me. I have reverted to vesa and will keep using it until a fix is available. -- system freeze after clicking task manager trash icon in "pan" newsreader https://launchpad.net/bugs/36596 From ben.collins at ubuntu.com Mon Sep 11 12:42:09 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Mon, 11 Sep 2006 12:42:09 -0000 Subject: [Bug 52649] Re: VIA IRQ quirk changes in 2.6.15-26.44 have broken various VIA devices References: <20060711150321.27257.34756.malonedeb@gangotri.ubuntu.com> Message-ID: <20060911124209.12796.94387.malone@gandwana.ubuntu.com> Reverting the patch that caused this. ** Changed in: linux-source-2.6.15 (Ubuntu) Importance: Untriaged => High Assignee: ChuckShort => Ben Collins Status: Confirmed => In Progress -- VIA IRQ quirk changes in 2.6.15-26.44 have broken various VIA devices https://launchpad.net/bugs/52649 From ben.collins at ubuntu.com Mon Sep 11 12:47:19 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Mon, 11 Sep 2006 12:47:19 -0000 Subject: [Bug 52649] Re: VIA IRQ quirk changes in 2.6.15-26.44 have broken various VIA devices References: <20060711150321.27257.34756.malonedeb@gangotri.ubuntu.com> Message-ID: <20060911124719.12752.59685.launchpad@gandwana.ubuntu.com> ** Changed in: linux-source-2.6.15 (Ubuntu) Status: In Progress => Fix Committed -- VIA IRQ quirk changes in 2.6.15-26.44 have broken various VIA devices https://launchpad.net/bugs/52649 From feenixx at hotmail.com Mon Sep 11 12:46:25 2006 From: feenixx at hotmail.com (mlind) Date: Mon, 11 Sep 2006 12:46:25 -0000 Subject: [Bug 59902] Re: [UVF Exception request] ndiswrapper-source 1.23-1 from Debian unstable References: <20060911124109.12796.86185.malonedeb@gandwana.ubuntu.com> Message-ID: <20060911124625.12796.17115.malone@gandwana.ubuntu.com> ** Attachment added: "ChangeLog.txt" http://librarian.launchpad.net/4217171/ChangeLog.diff -- [UVF Exception request] ndiswrapper-source 1.23-1 from Debian unstable https://launchpad.net/bugs/59902 From feenixx at hotmail.com Mon Sep 11 12:45:11 2006 From: feenixx at hotmail.com (mlind) Date: Mon, 11 Sep 2006 12:45:11 -0000 Subject: [Bug 59902] Re: [UVF Exception request] ndiswrapper-source 1.23-1 from Debian unstable References: <20060911124109.12796.86185.malonedeb@gandwana.ubuntu.com> Message-ID: <20060911124511.16587.44335.malone@gangotri.ubuntu.com> ** Attachment added: "diffstat.txt" http://librarian.launchpad.net/4217166/diffstat.txt -- [UVF Exception request] ndiswrapper-source 1.23-1 from Debian unstable https://launchpad.net/bugs/59902 From feenixx at hotmail.com Mon Sep 11 12:41:09 2006 From: feenixx at hotmail.com (mlind) Date: Mon, 11 Sep 2006 12:41:09 -0000 Subject: [Bug 59902] [UVF Exception request] ndiswrapper-source 1.23-1 from Debian unstable References: <20060911124109.12796.86185.malonedeb@gandwana.ubuntu.com> Message-ID: <20060911124109.12796.86185.malonedeb@gandwana.ubuntu.com> Public bug reported: Current Edgy's ndiswrapper-source fails to build kernel module for 2.6.17 series kernels. Using ndiswrapper-source 1.23 from Debian unstable builds the kernel module without problems. I requested merge on Bug #59350, but I was assisted to request a UVF exception instead. ** Affects: ndiswrapper (Ubuntu) Importance: Untriaged Assignee: MOTU UVF Team Status: Unconfirmed -- [UVF Exception request] ndiswrapper-source 1.23-1 from Debian unstable https://launchpad.net/bugs/59902 From feenixx at hotmail.com Mon Sep 11 12:47:55 2006 From: feenixx at hotmail.com (mlind) Date: Mon, 11 Sep 2006 12:47:55 -0000 Subject: [Bug 59902] Re: [UVF Exception request] ndiswrapper-source 1.23-1 from Debian unstable References: <20060911124109.12796.86185.malonedeb@gandwana.ubuntu.com> Message-ID: <20060911124755.12796.91159.malone@gandwana.ubuntu.com> pbuilder log ** Attachment added: "ndiswrapper_1.23-1ubuntu1_i386.build" http://librarian.launchpad.net/4217172/ndiswrapper_1.23-1ubuntu1_i386.build -- [UVF Exception request] ndiswrapper-source 1.23-1 from Debian unstable https://launchpad.net/bugs/59902 From feenixx at hotmail.com Mon Sep 11 12:49:46 2006 From: feenixx at hotmail.com (mlind) Date: Mon, 11 Sep 2006 12:49:46 -0000 Subject: [Bug 59902] Re: [UVF Exception request] ndiswrapper-source 1.23-1 from Debian unstable References: <20060911124109.12796.86185.malonedeb@gandwana.ubuntu.com> Message-ID: <20060911124946.12796.45740.malone@gandwana.ubuntu.com> Ubuntu changes from previous versions that package was built with. ** Attachment added: "merge.diff" http://librarian.launchpad.net/4217174/ndiswrapper.diff ** Changed in: ndiswrapper (Ubuntu) Assignee: (unassigned) => MOTU UVF Team -- [UVF Exception request] ndiswrapper-source 1.23-1 from Debian unstable https://launchpad.net/bugs/59902 From feenixx at hotmail.com Mon Sep 11 12:58:06 2006 From: feenixx at hotmail.com (mlind) Date: Mon, 11 Sep 2006 12:58:06 -0000 Subject: [Bug 59902] Re: [UVF Exception request] ndiswrapper-source 1.23-1 from Debian unstable References: <20060911124109.12796.86185.malonedeb@gandwana.ubuntu.com> Message-ID: <20060911125806.12796.33794.malone@gandwana.ubuntu.com> For some reason attached ChangeLog diffs didn't appear as message, but can be found from "Bug attachments" section. http://librarian.launchpad.net/4217171/ChangeLog.diff -- [UVF Exception request] ndiswrapper-source 1.23-1 from Debian unstable https://launchpad.net/bugs/59902 From christian.niemeyer at gmx.de Mon Sep 11 13:38:36 2006 From: christian.niemeyer at gmx.de (Christian Niemeyer) Date: Mon, 11 Sep 2006 13:38:36 -0000 Subject: [Bug 59909] Re: make-kpkg - fatal error: UTS Release does not match current version References: <20060911133747.16587.26214.malonedeb@gangotri.ubuntu.com> Message-ID: <20060911133836.16647.46807.malone@gangotri.ubuntu.com> sorry, I forgot: this happened under ubuntu edgy eft knot-2 ** Description changed: Binary package hint: kernel-package + + dist: ubuntu edgy eft knot-2 + kernel-source: 2.6.18-rc5 from kernel.org + ck patchset Hi! I tried to build a kernel-image on edgy with make xconfig and "make- kpkg". (around september 10th) This error occured: [code] #make-kpkg kernel_image kernel_modules kernel_headers (...) make[1]: Leaving directory `/usr/src/linux-2.6.15.6' ====== making target stamp-kernel-image [new prereqs: linux-image-2.6.15.6 linux -image-2.6.15.6]====== echo done > stamp-kernel-image ====== making target kernel_image [new prereqs: stamp-configure stamp-build-kern el stamp-kernel-image]====== The UTS Release version in include/linux/version.h "2.6.15.6" does not match current version: "2.6.15.6" Please correct this. [/code] (don't mind with the old kernel version, I got this error from a debian forum, because I can't copy&paste my own error message. But it was exactly the same.) However, this error occurs at the end of make-kpkg, very frustrating ;) Then I found out, that this bug is already registered at Debian: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=355147 I'm an advanced newbie (so to say) and maybe I did mess something up with the version string myself. But I tried it several times, to make sure the bug is in the package and not behind the keyboard ;) I also installed build-essentials libqt3-mt-dev etc. to build this kernel. Then I got an version auf "kernel-package" vom Debian unstable and installed it with dpkg -i. Same error. So don't know exactly, just want to report this. Regards, Chris -- make-kpkg - fatal error: UTS Release does not match current version https://launchpad.net/bugs/59909 From christian.niemeyer at gmx.de Mon Sep 11 13:37:47 2006 From: christian.niemeyer at gmx.de (Christian Niemeyer) Date: Mon, 11 Sep 2006 13:37:47 -0000 Subject: [Bug 59909] make-kpkg - fatal error: UTS Release does not match current version References: <20060911133747.16587.26214.malonedeb@gangotri.ubuntu.com> Message-ID: <20060911133747.16587.26214.malonedeb@gangotri.ubuntu.com> Public bug reported: Binary package hint: kernel-package dist: ubuntu edgy eft knot-2 kernel-source: 2.6.18-rc5 from kernel.org + ck patchset Hi! I tried to build a kernel-image on edgy with make xconfig and "make- kpkg". (around september 10th) This error occured: [code] #make-kpkg kernel_image kernel_modules kernel_headers (...) make[1]: Leaving directory `/usr/src/linux-2.6.15.6' ====== making target stamp-kernel-image [new prereqs: linux-image-2.6.15.6 linux -image-2.6.15.6]====== echo done > stamp-kernel-image ====== making target kernel_image [new prereqs: stamp-configure stamp-build-kern el stamp-kernel-image]====== The UTS Release version in include/linux/version.h "2.6.15.6" does not match current version: "2.6.15.6" Please correct this. [/code] (don't mind with the old kernel version, I got this error from a debian forum, because I can't copy&paste my own error message. But it was exactly the same.) However, this error occurs at the end of make-kpkg, very frustrating ;) Then I found out, that this bug is already registered at Debian: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=355147 I'm an advanced newbie (so to say) and maybe I did mess something up with the version string myself. But I tried it several times, to make sure the bug is in the package and not behind the keyboard ;) I also installed build-essentials libqt3-mt-dev etc. to build this kernel. Then I got an version auf "kernel-package" vom Debian unstable and installed it with dpkg -i. Same error. So don't know exactly, just want to report this. Regards, Chris ** Affects: kernel-package (Ubuntu) Importance: Untriaged Status: Unconfirmed -- make-kpkg - fatal error: UTS Release does not match current version https://launchpad.net/bugs/59909 From michael.chesterton at gmail.com Mon Sep 11 13:50:52 2006 From: michael.chesterton at gmail.com (michael chesterton) Date: Mon, 11 Sep 2006 13:50:52 -0000 Subject: [Bug 21412] Re: Default update-grub behaviour is not intuitive with respect to user modifications References: <20060113141241.21012.46008.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060911135052.16587.83169.launchpad@gangotri.ubuntu.com> ** Bug 59895 has been marked a duplicate of this bug -- Default update-grub behaviour is not intuitive with respect to user modifications https://launchpad.net/bugs/21412 From michael.chesterton at gmail.com Mon Sep 11 13:55:17 2006 From: michael.chesterton at gmail.com (michael chesterton) Date: Mon, 11 Sep 2006 13:55:17 -0000 Subject: [Bug 59895] Re: Updating Kernel modified Grub doesn't respect customised entries References: <20060911112630.12796.40877.malonedeb@gandwana.ubuntu.com> Message-ID: <20060911135517.16647.21790.malone@gangotri.ubuntu.com> *** This bug is a duplicate of bug 21412 *** I've marked it as a dup of bug 21412. You might want to add a comment to that bug? ** This bug has been marked a duplicate of bug 21412 Default update-grub behaviour is not intuitive with respect to user modifications -- Updating Kernel modified Grub doesn't respect customised entries https://launchpad.net/bugs/59895 From daniel.holbach at ubuntu.com Mon Sep 11 14:08:51 2006 From: daniel.holbach at ubuntu.com (Daniel Holbach) Date: Mon, 11 Sep 2006 14:08:51 -0000 Subject: [Bug 59902] Re: [UVF Exception request] ndiswrapper-source 1.23-1 from Debian unstable References: <20060911124109.12796.86185.malonedeb@gandwana.ubuntu.com> Message-ID: <20060911140851.16647.58921.malone@gangotri.ubuntu.com> Since it's in main, I subscribe the release-team instead. ** Changed in: ndiswrapper (Ubuntu) Assignee: MOTU UVF Team => (unassigned) -- [UVF Exception request] ndiswrapper-source 1.23-1 from Debian unstable https://launchpad.net/bugs/59902 From m.kreiner at levigo.de Mon Sep 11 14:08:21 2006 From: m.kreiner at levigo.de (Martin Kreiner) Date: Mon, 11 Sep 2006 14:08:21 -0000 Subject: [Bug 52649] Re: VIA IRQ quirk changes in 2.6.15-26.44 have broken various VIA devices References: <20060711150321.27257.34756.malonedeb@gangotri.ubuntu.com> Message-ID: <20060911140821.16587.82212.malone@gangotri.ubuntu.com> before this bug gets closed and falls into oblivion, i have a last request to people affected by this bug: would you please: - append the bootparameter "acpi=off" or - try to reserve any IRQ except "11" in BIOS and report if sound issues are gone and post the output of: - "dmesg" - "lspci -n" (if not already posted) - "cat /proc/interrupts" for the working and non working variant thanks, martin -- VIA IRQ quirk changes in 2.6.15-26.44 have broken various VIA devices https://launchpad.net/bugs/52649 From msandersen at tpg.com.au Mon Sep 11 14:35:59 2006 From: msandersen at tpg.com.au (Martin Andersen) Date: Mon, 11 Sep 2006 14:35:59 -0000 Subject: [Bug 21412] Re: Default update-grub behaviour is not intuitive with respect to user modifications References: <20060113141241.21012.46008.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060911143559.16647.44636.malone@gangotri.ubuntu.com> To get Windows (or any other OS) to appear first in the list, it is necessary to add it BEFORE the Automagic section, which is before all the Options and example comments, which is less than ideal. It would be OK to have an "Ubuntu" section with all its kernels, as long as you can add entries before and after as needed/desired, without having to go above the options and comments section. It is able to leave my Splashimage line alone in Dapper, which it didn't previously, so it should be able to do the same for non-Ubuntu entries. All this would be moot if there were a proper Graphical Grub editor, which is a separate issue. -- Default update-grub behaviour is not intuitive with respect to user modifications https://launchpad.net/bugs/21412 From burner at suppressingfire.org Mon Sep 11 14:49:17 2006 From: burner at suppressingfire.org (Michael R. Head) Date: Mon, 11 Sep 2006 14:49:17 -0000 Subject: [Bug 36596] Re: system freeze after clicking task manager trash icon in "pan" newsreader References: <20060325145711.6279.38615.malonedeb@gandwana.ubuntu.com> Message-ID: <20060911144917.12752.72883.malone@gandwana.ubuntu.com> Dang. Sorry to hear that. I recently upgraded to the development version of edgy and have reenabled the renderaccel option and haven't had a crash yet. Perhaps we'll all have better luck with the edgy drivers... -- system freeze after clicking task manager trash icon in "pan" newsreader https://launchpad.net/bugs/36596 From venom2001 at mail.ru Mon Sep 11 15:39:01 2006 From: venom2001 at mail.ru (Glebushka) Date: Mon, 11 Sep 2006 15:39:01 -0000 Subject: [Bug 45636] Re: dapper on toshiba sat. m70: gnome immediately freezes with new kernels (incl. 2.6.15-23-386/686) References: <20060519181444.18604.677.malonedeb@gandwana.ubuntu.com> Message-ID: <20060911153901.12752.27433.malone@gandwana.ubuntu.com> I am still unable to run kubuntu edgy knot 2 livecd with any of options on my TOSHIBA Satellite M70-192-RU. In usual mode i get a blank screen with a text cursor blinking, on safe video same but with white stripes all over the screen. Also Dapper 6.06.1 alternate cd wont insall - halts in different places, usually at 89% installing additional software, but never after formatting. Once it installed competely, but i got a kernel panic during boot. Looks like it affects most linux distribs with kernel newer than 2.6.15. I also tried openSuse 10.1 with 2.6.16.13 kernel - install hangs at the very beginning of copying files. The only thing I was able to run on this laptop was mepis 3.4.3 using kernel 2.6.15, but mepis 6.0 based on ubuntu with same kernel wont install. -- dapper on toshiba sat. m70: gnome immediately freezes with new kernels (incl. 2.6.15-23-386/686) https://launchpad.net/bugs/45636 From martin.pitt at ubuntu.com Mon Sep 11 16:02:25 2006 From: martin.pitt at ubuntu.com (Martin Pitt) Date: Mon, 11 Sep 2006 16:02:25 -0000 Subject: [Bug 46991] Re: after upgrading default version of pmount, firewire drive will not automount anymore References: <20060527220131.9440.67889.malonedeb@gandwana.ubuntu.com> Message-ID: <20060911160225.12752.16181.malone@gandwana.ubuntu.com> No, pmount does not do any configuration in the package maintainer scripts. -- after upgrading default version of pmount, firewire drive will not automount anymore https://launchpad.net/bugs/46991 From peterbe at sonic.net Mon Sep 11 17:32:51 2006 From: peterbe at sonic.net (Peter Belew) Date: Mon, 11 Sep 2006 17:32:51 -0000 Subject: [Bug 52649] Re: VIA IRQ quirk changes in 2.6.15-26.44 have broken various VIA devices References: <20060711150321.27257.34756.malonedeb@gangotri.ubuntu.com> Message-ID: <20060911173251.12752.5930.malone@gandwana.ubuntu.com> I just tried adding "acpi=off" to the grub stanza for the 2.6.15.26 kernel and that seems to be a successful workaround for the problem. I'll post dmesg etc. later in the day when I'm back on that system. -- VIA IRQ quirk changes in 2.6.15-26.44 have broken various VIA devices https://launchpad.net/bugs/52649 From peterbe at sonic.net Mon Sep 11 17:36:03 2006 From: peterbe at sonic.net (Peter Belew) Date: Mon, 11 Sep 2006 17:36:03 -0000 Subject: [Bug 53207] Re: Sound misfunctions with kernel 2.6.15-26-386 on Jetway MB References: <20060717050214.1931.83828.malonedeb@gangotri.ubuntu.com> Message-ID: <20060911173603.12752.27179.malone@gandwana.ubuntu.com> Adding "acpi=off" to the grub boot stanza for this kernel stops this from happening. See Bug #52649 . -- Sound misfunctions with kernel 2.6.15-26-386 on Jetway MB https://launchpad.net/bugs/53207 From cps1966 at yahoo.com Mon Sep 11 17:43:24 2006 From: cps1966 at yahoo.com (geneo93) Date: Mon, 11 Sep 2006 17:43:24 -0000 Subject: [Bug 29789] Re: tv card audio not working References: <20060126170552.26274.32755.malonedeb@gangotri.ubuntu.com> Message-ID: <20060911174324.12752.36958.malone@gandwana.ubuntu.com> http://bugzilla.kernel.org/show_bug.cgi?id=7109 seems its been kernel problem -- tv card audio not working https://launchpad.net/bugs/29789 From stefandanielschwarz at googlemail.com Mon Sep 11 18:54:34 2006 From: stefandanielschwarz at googlemail.com (Stefan Daniel Schwarz) Date: Mon, 11 Sep 2006 18:54:34 -0000 Subject: [Bug 52852] Re: MacBook gets extremely hot under Linux References: <20060713091229.13020.45049.malonedeb@gandwana.ubuntu.com> Message-ID: <20060911185434.16647.17387.malone@gangotri.ubuntu.com> I also noticed my MacBook (Black) getting very hot (much hotter than in OS X). I recently applied a firmware update which claimed to improve fan behavior, but so far I didn't notice any difference. The directories /proc/acpi/fan/ and /proc/acpi/thermal_zone/ are both empty - so Ubuntu's power management hasn't discovered the fan and cooling systems! I'm not sure if the MacBook firmware itself can and will prevent serious overheating. If it doesn't, couldn't that cause permanent damage to the device? In that case, this bug should be addressed with higher priority, it certainly is of highest priority to MacBook users who care for the safety of their pricy MacBooks! (About the "sleep not working" comments: Can't comment, but if it doesn't work, please file another bug since it's not directly related to the overheating issue.) -- MacBook gets extremely hot under Linux https://launchpad.net/bugs/52852 From stefandanielschwarz at googlemail.com Mon Sep 11 18:55:33 2006 From: stefandanielschwarz at googlemail.com (Stefan Daniel Schwarz) Date: Mon, 11 Sep 2006 18:55:33 -0000 Subject: [Bug 52852] Re: MacBook gets extremely hot under Linux References: <20060713091229.13020.45049.malonedeb@gandwana.ubuntu.com> Message-ID: <20060911185533.12796.41489.malone@gandwana.ubuntu.com> cat /proc/version Linux version 2.6.15-26-686 (buildd at terranova) (gcc version 4.0.3 (Ubuntu 4.0.3-1ubuntu5)) #1 SMP PREEMPT Thu Aug 3 03:13:28 UTC 2006 (Same as the other's version!) -- MacBook gets extremely hot under Linux https://launchpad.net/bugs/52852 From tristan.anderson at censeoit.com Mon Sep 11 19:18:34 2006 From: tristan.anderson at censeoit.com (Tristan) Date: Mon, 11 Sep 2006 19:18:34 -0000 Subject: [Bug 59795] Re: [Bug 59795] Re: Ubiquity crashes 6.06 on Installation References: <20060910161317.16587.88598.malonedeb@gangotri.ubuntu.com> <20060911100809.12796.3713.malone@gandwana.ubuntu.com> Message-ID: <4505B68A.5030001@censeoit.com> Colin Unfortunately I was unable to save the log files as requested, I tried installing it again in order to reproduce the bug for a third time.since I had forgotten to include them in my original report, I started up the ubuntu installer and despite the bug occurring twice before, much to my disgust/delight I am unable reproduce the error. I cant understand it on all the occasions I performed the same actions but I simply cannot reproduce it at all, I have run the installer 7 times now and the bug only ever occured the first two. I cant explain it and I feel terrible that I may have wasted your time on this. I have unbuntu running now (very wobbly with the gnome-mixer applet crashing every 30 seconds) but I still cannot reproduce the original bug. (bad disk sector maybe?? that's the only explanation I can think of.) I have your email address so as the ubiquity maintainer I will mail you and submit another bug report if I encounter it again. You chaps have my utmost respect in what you do, and your time would be better spent fire-fighting rather than chasing ghosts in the machine. I apologise for this, after I encountered it twice I thought I was on to a sure problem. Please close the report as unconfirmed until I can prove it exists with log files to the contrary. Kind Regards Tristan Anderson > Well, that message indicates that a directory doesn't exist even though > it's just been created on the hard disk, so if your hardware is working > fine on Windows then I can only conclude that this is a kernel bug of > some kind. Please attach /var/log/syslog so that we have a better chance > of tracking this down. > > ** Changed in: ubiquity (Ubuntu) > Sourcepackagename: ubiquity => linux-source-2.6.15 > Assignee: (unassigned) => Colin Watson > > -- Ubiquity crashes 6.06 on Installation https://launchpad.net/bugs/59795 From travis_buuck at umit.maine.edu Mon Sep 11 19:41:46 2006 From: travis_buuck at umit.maine.edu (sledhead45) Date: Mon, 11 Sep 2006 19:41:46 -0000 Subject: [Bug 6032] Re: sound doesn't work (via 8233/ac97) References: <20051222003637.24593.90397.malonedeb@gangotri.ubuntu.com> Message-ID: <20060911194146.16587.21546.malone@gangotri.ubuntu.com> I can confirm I have the same problem with my Averatec 3715-ED1 (using via 8233/ac97). I am dual booting XP pro and dapper. It seems as though as long as ubuntu is initially booted before xp (I generally hibernate rather than restarting) it works. but if for instance xp is hibernated and ubuntu is restarted i will get no sound at all. I haven't done alot of testing on this hypothesis, but that seems to be the case. -- sound doesn't work (via 8233/ac97) https://launchpad.net/bugs/6032 From chantry.xavier at gmail.com Mon Sep 11 21:17:11 2006 From: chantry.xavier at gmail.com (Xavier) Date: Mon, 11 Sep 2006 21:17:11 -0000 Subject: [Bug 59909] Re: make-kpkg - fatal error: UTS Release does not match current version References: <20060911133747.16587.26214.malonedeb@gangotri.ubuntu.com> Message-ID: <20060911211711.16587.14590.malone@gangotri.ubuntu.com> Hmm, I see 3 bugs against kernel-package, and 58570 is among them, I'm not sure how you missed it :) -- make-kpkg - fatal error: UTS Release does not match current version https://launchpad.net/bugs/59909 From chantry.xavier at gmail.com Mon Sep 11 21:28:40 2006 From: chantry.xavier at gmail.com (Xavier) Date: Mon, 11 Sep 2006 21:28:40 -0000 Subject: [Bug 59909] Re: make-kpkg - fatal error: UTS Release does not match current version References: <20060911133747.16587.26214.malonedeb@gangotri.ubuntu.com> Message-ID: <20060911212840.16587.35389.malone@gangotri.ubuntu.com> Besides, your report is wrong afaik, the issue you have only happens with 2.6.18-rc kernels, while the debian bug you gave a link to also affected older kernels and has been fixed. I admit it was a similar problem however, which concerns the same part of the script. See https://launchpad.net/distros/ubuntu/+source/kernel- package/+bug/58570 -- make-kpkg - fatal error: UTS Release does not match current version https://launchpad.net/bugs/59909 From joachim at kom.aau.dk Mon Sep 11 21:51:59 2006 From: joachim at kom.aau.dk (JDahl) Date: Mon, 11 Sep 2006 21:51:59 -0000 Subject: [Bug 38263] Re: freeze at startup References: <20060405194706.24486.46138.malonedeb@gangotri.ubuntu.com> Message-ID: <20060911215159.16587.16162.malone@gangotri.ubuntu.com> After booting with "acpi_skip_timer_override" there appears to be a problem with the CDROM driver at the second stage (probably caused by some IRQ problems - I also tried booting with "nodma", but that went even worse). The CDROM drive makes a sounds like the CDROM media might be damaged and the installation halts, so I burned a new imaged and checked the md5sum - and the install CD is fine. I attached a screendump, but I doubt it's helpful. Booting with the "enable_8254_timer" option seems to screw up the CDROM driver even worse, and the annoying sound starts already while loading the ramdisk image. ** Attachment added: "screendump from install" http://librarian.launchpad.net/4224992/screendump.jpg -- freeze at startup https://launchpad.net/bugs/38263 From djvasi at gmail.com Mon Sep 11 22:46:52 2006 From: djvasi at gmail.com (Dave Vasilevsky) Date: Mon, 11 Sep 2006 22:46:52 -0000 Subject: [Bug 59734] Re: offb consoles are blank References: <20060910064508.16587.45253.malonedeb@gangotri.ubuntu.com> Message-ID: <20060911224652.16647.36893.malone@gangotri.ubuntu.com> I've verified that I can successfully use the install CDs for Dapper and Edgy if I boot from a kernel that includes rivafb. -- offb consoles are blank https://launchpad.net/bugs/59734 From chantry.xavier at gmail.com Mon Sep 11 23:04:26 2006 From: chantry.xavier at gmail.com (Xavier) Date: Mon, 11 Sep 2006 23:04:26 -0000 Subject: [Bug 59909] Re: make-kpkg - fatal error: UTS Release does not match current version References: <20060911133747.16587.26214.malonedeb@gangotri.ubuntu.com> Message-ID: <20060911230426.12752.4541.launchpad@gandwana.ubuntu.com> *** This bug is a duplicate of bug 58570 *** ** This bug has been marked a duplicate of bug 58570 kernel_image target fails with kernel 2.6.18-rc -- make-kpkg - fatal error: UTS Release does not match current version https://launchpad.net/bugs/59909 From chantry.xavier at gmail.com Mon Sep 11 23:04:26 2006 From: chantry.xavier at gmail.com (Xavier) Date: Mon, 11 Sep 2006 23:04:26 -0000 Subject: [Bug 58570] Re: kernel_image target fails with kernel 2.6.18-rc References: <20060902121437.30936.48954.malonedeb@gandwana.ubuntu.com> Message-ID: <20060911230426.12752.8548.launchpad@gandwana.ubuntu.com> ** Bug 59909 has been marked a duplicate of this bug -- kernel_image target fails with kernel 2.6.18-rc https://launchpad.net/bugs/58570 From psientist at gmail.com Mon Sep 11 23:57:28 2006 From: psientist at gmail.com (discord) Date: Mon, 11 Sep 2006 23:57:28 -0000 Subject: [Bug 59983] ndiswrapper in edgy broken References: <20060911235728.16647.6163.malonedeb@gangotri.ubuntu.com> Message-ID: <20060911235728.16647.6163.malonedeb@gangotri.ubuntu.com> Public bug reported: colin at integral:~$ sudo ndiswrapper -i /home/colin/Desktop/bcmwl5.inf Error: no versions of ndiswrapper found! colin at integral:~$ sudo modprobe ndiswrapper FATAL: Error inserting ndiswrapper (/lib/modules/2.6.17-7-generic/kernel/drivers/net/ndiswrapper/ndiswrapper.ko): Invalid argument colin at integral:~$ i have the ndiswrapper-utils and ndiswrapper-common packages installed. Very frustrating... ** Affects: ndiswrapper (Ubuntu) Importance: Untriaged Status: Unconfirmed -- ndiswrapper in edgy broken https://launchpad.net/bugs/59983 From TrinitronX at gmail.com Tue Sep 12 00:13:52 2006 From: TrinitronX at gmail.com (TrinitronX) Date: Tue, 12 Sep 2006 00:13:52 -0000 Subject: [Bug 32938] Re: Usb keyboard dies when gdm starts References: <20060226131358.27067.7634.malonedeb@gangotri.ubuntu.com> Message-ID: <20060912001352.16587.40930.malone@gangotri.ubuntu.com> I have just managed to get my PS/2 keyboard working by unplugging it and plugging it into my PC's other PS/2 port (labelled for use with a mouse) Please see bug #48877 for my full post, PC specs (if needed), and current xorg.conf file. Here: https://launchpad.net/distros/ubuntu/+bug/48877 -- Usb keyboard dies when gdm starts https://launchpad.net/bugs/32938 From peterbe at sonic.net Tue Sep 12 00:44:42 2006 From: peterbe at sonic.net (Peter Belew) Date: Tue, 12 Sep 2006 00:44:42 -0000 Subject: [Bug 52649] Re: VIA IRQ quirk changes in 2.6.15-26.44 have broken various VIA devices References: <20060711150321.27257.34756.malonedeb@gangotri.ubuntu.com> Message-ID: <20060912004442.16587.83498.malone@gangotri.ubuntu.com> Here are the above-mentioned diagnostic outputs, in the files 52649-failed and 52649-working. ** Attachment added: "Sound bug occurs when acpi is enabled." http://librarian.launchpad.net/4226501/52649-failed -- VIA IRQ quirk changes in 2.6.15-26.44 have broken various VIA devices https://launchpad.net/bugs/52649 From peterbe at sonic.net Tue Sep 12 00:46:24 2006 From: peterbe at sonic.net (Peter Belew) Date: Tue, 12 Sep 2006 00:46:24 -0000 Subject: [Bug 52649] Re: VIA IRQ quirk changes in 2.6.15-26.44 have broken various VIA devices References: <20060711150321.27257.34756.malonedeb@gangotri.ubuntu.com> Message-ID: <20060912004624.16647.59861.malone@gangotri.ubuntu.com> - "dmesg" - "lspci -n" (if not already posted) - "cat /proc/interrupts" with acpi=off ** Attachment added: "Sound works when acpi is disabled." http://librarian.launchpad.net/4226503/52649-working -- VIA IRQ quirk changes in 2.6.15-26.44 have broken various VIA devices https://launchpad.net/bugs/52649 From mdz at ubuntu.com Tue Sep 12 00:54:50 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Tue, 12 Sep 2006 00:54:50 -0000 Subject: [Bug 43531] Re: Kernel isn't very useful without a boot loader, but doesn't depend on one References: <445F0F3C.9090709@canonical.com> Message-ID: <20060912005450.16587.66528.malone@gangotri.ubuntu.com> Reminder that this is targeted for Edgy -- Kernel isn't very useful without a boot loader, but doesn't depend on one https://launchpad.net/bugs/43531 From mumbly at s2ii.com Tue Sep 12 05:52:16 2006 From: mumbly at s2ii.com (Olivier Prieur) Date: Tue, 12 Sep 2006 05:52:16 -0000 Subject: [Bug 38263] Re: freeze at startup References: <20060405194706.24486.46138.malonedeb@gangotri.ubuntu.com> Message-ID: <20060912055217.12752.89588.malone@gandwana.ubuntu.com> I had the same probleme ! Computer : Acer Aspire 5024 WLMI (turion) ubuntu version : Edgy Eft knot 2 Can't boot with traditionnal options ... But the computer boots with these options : acpi=off irqpoll xforcevesa But : i've got a black screen. Gnome seems to open because i can hear the music ... but no image even in safe graphic mode ! So i had to switch for another console and make a dpkg-reconfigure xserver-xorg with vesa solution ... AND IT WORKED ! -- freeze at startup https://launchpad.net/bugs/38263 From ok1dtm at quick.cz Tue Sep 12 07:05:11 2006 From: ok1dtm at quick.cz (josef) Date: Tue, 12 Sep 2006 07:05:11 -0000 Subject: [Bug 59804] Unable install Ubuntu 6.06 to MB with ICH8 References: <20060910172412.16587.27235.malonedeb@gangotri.ubuntu.com> Message-ID: <20060912070511.17774.3363.launchpad@canonical@gandwana.ubuntu.com> Public bug reported: Hi, I have big trouble to install Dapper pro on my new PC. Motherboard is Gigabyte P965 DS4. I boot installation CD from CD-ROM as set on my bios and appear wellcome screen and installation menu. In all case after hardware recognizing, appear a message: "could not find Ubuntu installation CD" and then "activating manual setup program". So appear a menu and there are - start installation or system - verify installation CD-ROM and others Maybe is JMicron on board? Linux doesn't see CD-ROM, seems that doesn't recognize IDE channels ** Affects: linux-source-2.6.15 (Ubuntu) Importance: Untriaged Status: Confirmed -- Unable install Ubuntu 6.06 to MB with ICH8 https://launchpad.net/bugs/59804 From thomas.hotz at gmail.com Tue Sep 12 07:05:11 2006 From: thomas.hotz at gmail.com (Thomas Hotz) Date: Tue, 12 Sep 2006 07:05:11 -0000 Subject: [Bug 59804] Re: Unable install Ubuntu 6.06 to MB with ICH8 References: <20060910172412.16587.27235.malonedeb@gangotri.ubuntu.com> Message-ID: <20060912070511.17774.83370.launchpad@gandwana.ubuntu.com> *** This bug is a duplicate of bug 57502 *** ** Changed in: initramfs-tools (Ubuntu) Sourcepackagename: initramfs-tools => linux-source-2.6.15 Status: Unconfirmed => Confirmed -- Unable install Ubuntu 6.06 to MB with ICH8 https://launchpad.net/bugs/59804 From Joerg-Cyril.Hoehle at T-Systems.com Tue Sep 12 08:03:24 2006 From: Joerg-Cyril.Hoehle at T-Systems.com (=?utf-8?b?SsO2cmcgSMO2aGxl?=) Date: Tue, 12 Sep 2006 08:03:24 -0000 Subject: [Bug 25551] conflict between vga=0x317 and suspend mode References: <20060113143421.21012.76875.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060912080324.17774.74703.malone@gandwana.ubuntu.com> In hindsight, it's not breezy-updates that fixed the problem. I removed vga=0x317 from the grub kernel line, that's when suspend suddenly started working again! Not being able to use a high resolution console together with suspend/hibernate is another bug. I very much enjoy and miss the highres console from the Warty Live CD. -- since Breezy, suspend to disk fails in resume phase https://launchpad.net/bugs/25551 From elitepenguin at gmx.net Tue Sep 12 08:13:29 2006 From: elitepenguin at gmx.net (Nils) Date: Tue, 12 Sep 2006 08:13:29 -0000 Subject: [Bug 17599] not resolved References: <20060113135224.21012.50372.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060912081329.30564.28969.malone@gangotri.ubuntu.com> I have this issue on a T43p with Kubuntu Dapper. I'm not sure why this problem is, but it stopped after I switched WLAN on again. When I turned it back off cpu utilisation was very high again. I also just setup the laptop and noticed that it does not use linux-686, so i'm not sure if this has something to do with the problem. Btw: Why does ubuntu install kernels for such old systems by default?? ** Attachment added: "uname -a, lspci, lsmod" http://librarian.launchpad.net/4227778/MySys -- ksoftirqd/0 takes all the CPU power https://launchpad.net/bugs/17599 From martin.pitt at ubuntu.com Tue Sep 12 08:25:58 2006 From: martin.pitt at ubuntu.com (Martin Pitt) Date: Tue, 12 Sep 2006 08:25:58 -0000 Subject: [Bug 33072] Re: Pulling AC plug suspends computer References: <20060227195855.27067.69835.malonedeb@gangotri.ubuntu.com> Message-ID: <20060912082558.17774.69034.malone@gandwana.ubuntu.com> This does not affect the current edgy version. ** Changed in: hal (Ubuntu) Status: In Progress => Fix Released -- Pulling AC plug suspends computer https://launchpad.net/bugs/33072 From martin.pitt at ubuntu.com Tue Sep 12 08:34:11 2006 From: martin.pitt at ubuntu.com (Martin Pitt) Date: Tue, 12 Sep 2006 08:34:11 -0000 Subject: [Bug 19390] Re: sometimes mounts both raw device and partition References: <20060113140129.21012.38508.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060912083411.30482.76175.launchpad@gangotri.ubuntu.com> ** Changed in: hal (Ubuntu) Status: In Progress => Fix Committed -- sometimes mounts both raw device and partition https://launchpad.net/bugs/19390 From martin.pitt at ubuntu.com Tue Sep 12 08:53:42 2006 From: martin.pitt at ubuntu.com (Martin Pitt) Date: Tue, 12 Sep 2006 08:53:42 -0000 Subject: [Bug 19390] Re: sometimes mounts both raw device and partition References: <20060113140129.21012.38508.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060912085343.17818.38688.malone@gandwana.ubuntu.com> hal (0.5.7.1-0ubuntu10) edgy; urgency=low . * Add debian/patches/00upstream-01-music-players-fdi.patch: Update 10-usb-music-players.fdi from GIT head to support many more music players (this supersedes the current 17-mp3-player-fdi.patch). Closes: LP#59022 * debian/patches/17-mp3-player-fdi.patch: Add information for the Philips GoGear SA1330, thanks to Juri Pakaste! Closes: LP#58077 * debian/10-storage-policy.fdi: Remove enabling of hal-addon-storage, since 20-storage-methods.fdi already does that. We don't need two h-a-s processes for each drive. Closes: LP#58935 * debian/hald.8: Remove --retain-privileges documentation, this option does not exist any more. Closes: LP#44770 * Add debian/patches/00upstream-02-mWh-conversion.patch: - Properly convert mAh to mWh rather than uWh. - Taken from GIT head: http://gitweb.freedesktop.org/?p=hal.git;a=commit;h=b30d1320614564d226018b8a491ee4f70567db64 - Closes: LP#53719 * Add debian/patches/00upstream-03-fs-on-partitioned-devices.patch: - Do not probe for a file system on a device which already has partitions created. This fixes empty bogus mounts for somewhat unclean partition tables. - Taken from GIT head: http://gitweb.freedesktop.org/?p=hal.git;a=commit;h=2c98ffc8dac7ee161042355790256d836e4028f9 - Closes: LP#19390 * Add debian/patches/19_dont_overwrite_formfactor.patch: Do not overwrite the form factor as set by PMU/ACPI/DMI with an 'unknown' value from computer_probing_pcbios_helper_done(). Thanks to VETSEL Patrice for this patch! Closes: LP#59342 ** Changed in: hal (Ubuntu) Status: Fix Committed => Fix Released -- sometimes mounts both raw device and partition https://launchpad.net/bugs/19390 From martin.pitt at ubuntu.com Tue Sep 12 10:20:12 2006 From: martin.pitt at ubuntu.com (Martin Pitt) Date: Tue, 12 Sep 2006 10:20:12 -0000 Subject: [Bug 6627] Re: lexmark z53 blank pages References: <20060110202826.5372.9972.malonedeb@gangotri.ubuntu.com> Message-ID: <20060912102012.30564.42417.malone@gangotri.ubuntu.com> gutenprint 5.0 final is not yet in the archive, but Till is currently working on it. Thus 'fix released' was a little premature. ** Changed in: gutenprint (Ubuntu) Status: Fix Released => In Progress -- lexmark z53 blank pages https://launchpad.net/bugs/6627 From martin.pitt at ubuntu.com Tue Sep 12 10:26:56 2006 From: martin.pitt at ubuntu.com (Martin Pitt) Date: Tue, 12 Sep 2006 10:26:56 -0000 Subject: [Bug 57020] Re: Double mount of USB pendrive References: <20060820213631.23667.97836.malonedeb@gandwana.ubuntu.com> Message-ID: <20060912102656.30482.6470.malone@gangotri.ubuntu.com> *** This bug is a duplicate of bug 19390 *** This has just been fixed in edgy, see bug 19390. ** This bug has been marked a duplicate of bug 19390 sometimes mounts both raw device and partition ** Changed in: hal (Ubuntu) Status: Needs Info => Fix Released -- Double mount of USB pendrive https://launchpad.net/bugs/57020 From martin.pitt at ubuntu.com Tue Sep 12 10:26:42 2006 From: martin.pitt at ubuntu.com (Martin Pitt) Date: Tue, 12 Sep 2006 10:26:42 -0000 Subject: [Bug 19390] Re: sometimes mounts both raw device and partition References: <20060113140129.21012.38508.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060912102642.17774.5662.launchpad@gandwana.ubuntu.com> ** Bug 57020 has been marked a duplicate of this bug -- sometimes mounts both raw device and partition https://launchpad.net/bugs/19390 From 84yelo3 at gmail.com Tue Sep 12 13:19:01 2006 From: 84yelo3 at gmail.com (=?utf-8?q?Nicol=C3=B2_Chieffo?=) Date: Tue, 12 Sep 2006 13:19:01 -0000 Subject: [Bug 36885] Re: Asus laptop hangs on TFT/VGA video switch (Fn-F8) References: <20060327182219.6279.42415.malonedeb@gandwana.ubuntu.com> Message-ID: <20060912131901.30564.90408.malone@gangotri.ubuntu.com> this bug is in Edgy too! I can't get any debug messages even after redirecting syslog *.* to /var/log/messages ** Also affects: linux-source-2.6.17 (Ubuntu) Importance: Untriaged Status: Unconfirmed -- Asus laptop hangs on TFT/VGA video switch (Fn-F8) https://launchpad.net/bugs/36885 From mjg59 at codon.org.uk Tue Sep 12 15:24:49 2006 From: mjg59 at codon.org.uk (Matthew Garrett) Date: Tue, 12 Sep 2006 15:24:49 -0000 Subject: [Bug 59136] Re: Real time clock (RTC) runs 50% too fast when speedstep is enabled References: <20060906071114.3933.75618.malonedeb@gandwana.ubuntu.com> Message-ID: <20060912152449.30564.87856.malone@gangotri.ubuntu.com> Is it possible to test a beta version of 6.10 on this machine? A live CD should do, there's no need to do a full install. -- Real time clock (RTC) runs 50% too fast when speedstep is enabled https://launchpad.net/bugs/59136 From sfllaw at ubuntu.com Tue Sep 12 17:31:20 2006 From: sfllaw at ubuntu.com (Simon Law) Date: Tue, 12 Sep 2006 17:31:20 -0000 Subject: [Bug 25673] Re: Keyboard and touchpad doesn't work after suspend-to-ram on a Fujitsu-Siemens Amilo M1420 References: <20060113143457.21012.29014.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060912173120.30482.83226.malone@gangotri.ubuntu.com> Often the touchpad is controlled by the psmouse module. Could you please try the workaround documented in bug 22931? Thanks. ** Changed in: linux-source-2.6.15 (Ubuntu) Sourcepackagename: linux-source-2.6.15 => acpi-support Assignee: (unassigned) => Simon Law -- Keyboard and touchpad doesn't work after suspend-to-ram on a Fujitsu-Siemens Amilo M1420 https://launchpad.net/bugs/25673 From alex.vice.grab at gmail.com Tue Sep 12 20:23:33 2006 From: alex.vice.grab at gmail.com (victorovitch3) Date: Tue, 12 Sep 2006 20:23:33 -0000 Subject: [Bug 42600] Re: Microphone does not work on Dell Inspiron 630m References: <20060502153431.16712.10593.malonedeb@gandwana.ubuntu.com> Message-ID: <20060912202333.17818.92304.malone@gandwana.ubuntu.com> I have the same problem with the Dell Inspiron 630m. I have attempted to install the alsa mixer, but it does not work. I don't quite understand what the attachment by Daniel T Chen means, could someone clarify it to me, since I was not able to run it in the terminal... Thank you in advance -- Microphone does not work on Dell Inspiron 630m https://launchpad.net/bugs/42600 From nospam at rossfamily.co.uk Tue Sep 12 20:32:18 2006 From: nospam at rossfamily.co.uk (Andrew Ross) Date: Tue, 12 Sep 2006 20:32:18 -0000 Subject: [Bug 31857] Re: r818x driver freezes randomly References: <20060218061331.1387.68568.malonedeb@gangotri.ubuntu.com> Message-ID: <20060912203218.30482.49875.launchpad@gangotri.ubuntu.com> ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Unconfirmed => Confirmed -- r818x driver freezes randomly https://launchpad.net/bugs/31857 From tanertopal at gmx.de Tue Sep 12 22:18:09 2006 From: tanertopal at gmx.de (Ramosis) Date: Tue, 12 Sep 2006 22:18:09 -0000 Subject: [Bug 38263] Re: freeze at startup References: <20060405194706.24486.46138.malonedeb@gangotri.ubuntu.com> Message-ID: <20060912221809.30482.65633.malone@gangotri.ubuntu.com> @Matthew Garrett Nothing changed if i try the both bootoptions. btw: If i try to install Ubuntu 5.10 it skip the error... and everything is well. But i would like to install dapper drake... -- freeze at startup https://launchpad.net/bugs/38263 From did447 at gmail.com Wed Sep 13 01:24:49 2006 From: did447 at gmail.com (didier) Date: Wed, 13 Sep 2006 01:24:49 -0000 Subject: [Bug 60073] Re: Lexmark z52 Printer prints blank pages References: <20060912121230.17818.68258.malonedeb@gandwana.ubuntu.com> Message-ID: <20060913012449.30564.85382.launchpad@gangotri.ubuntu.com> *** This bug is a duplicate of bug 6627 *** ** This bug has been marked a duplicate of bug 6627 lexmark z53 blank pages -- Lexmark z52 Printer prints blank pages https://launchpad.net/bugs/60073 From did447 at gmail.com Wed Sep 13 01:24:49 2006 From: did447 at gmail.com (didier) Date: Wed, 13 Sep 2006 01:24:49 -0000 Subject: [Bug 6627] Re: lexmark z53 blank pages References: <20060110202826.5372.9972.malonedeb@gangotri.ubuntu.com> Message-ID: <20060913012449.30564.61622.launchpad@gangotri.ubuntu.com> ** Bug 60073 has been marked a duplicate of this bug -- lexmark z53 blank pages https://launchpad.net/bugs/6627 From venom2001 at mail.ru Wed Sep 13 01:42:51 2006 From: venom2001 at mail.ru (Glebushka) Date: Wed, 13 Sep 2006 01:42:51 -0000 Subject: [Bug 45636] Re: dapper on toshiba sat. m70: gnome immediately freezes with new kernels (incl. 2.6.15-23-386/686) References: <20060519181444.18604.677.malonedeb@gandwana.ubuntu.com> Message-ID: <20060913014251.17818.81747.malone@gandwana.ubuntu.com> I do confirm that i am unable to boot current (120906) ubuntu edgy livecd with this laptop. Maybe this page can help solve this http://eavr.u-strasbg.fr/~loic/toshiba_install.html it includes config for compiling kernel 2.6.15.2 to use on this laptop, and it seems to work fine, the only problem it's for Slackware. -- dapper on toshiba sat. m70: gnome immediately freezes with new kernels (incl. 2.6.15-23-386/686) https://launchpad.net/bugs/45636 From james.henstridge at canonical.com Wed Sep 13 01:49:35 2006 From: james.henstridge at canonical.com (James Henstridge) Date: Wed, 13 Sep 2006 01:49:35 -0000 Subject: [Bug 44246] Re: racoon-0.6.5-4ubuntu1 fails to configure References: <20060511180813.15848.37980.malonedeb@gangotri.ubuntu.com> Message-ID: <20060913014935.17774.75021.launchpad@gandwana.ubuntu.com> ** Changed in: Ubuntu Sourcepackagename: None => ipsec-tools -- racoon-0.6.5-4ubuntu1 fails to configure https://launchpad.net/bugs/44246 From catkiller at catkiller4u.de Wed Sep 13 05:28:18 2006 From: catkiller at catkiller4u.de (catkiller) Date: Wed, 13 Sep 2006 05:28:18 -0000 Subject: [Bug 42600] Re: Microphone does not work on Dell Inspiron 630m References: <20060502153431.16712.10593.malonedeb@gandwana.ubuntu.com> Message-ID: <20060913052818.30482.47002.malone@gangotri.ubuntu.com> i should have said that i use an dell latitude d620. still the problem remains the same. victor: daniel posted a patch for the alsa-drivers which got included in their lates version 1.0.13rc1. have your tried this version? it is not in the repositories but you can download it from http://www.alsa- project.org/. could you try this and see if it helps? thanx, catkiller -- Microphone does not work on Dell Inspiron 630m https://launchpad.net/bugs/42600 From bernardo at bandos.net Wed Sep 13 06:53:58 2006 From: bernardo at bandos.net (Jose Bernardo) Date: Wed, 13 Sep 2006 06:53:58 -0000 Subject: [Bug 28647] Re: sbp2 hot plug causes hard crashes References: <20060116010423.6087.7224.malonedeb@gangotri.ubuntu.com> Message-ID: <20060913065358.17774.9745.malone@gandwana.ubuntu.com> Here I get the hard crashes when the firewire drive offlines. I have a Hitachi 250GB HD inside a enclosure, and it works mostly well when connected by USB. I've seen the drive going offiline (when using usb) when it gets hot, which happened a lot lately with air temperature above 38 every day; I assume that this is the problem when connecting the enclosure using firewire, that it hangs the system solid when there is a unexpected disconnect. No problems at all if I umount then disconnect. My system is a MSI K8T NEO 2 motherboard and a AMD64 3200+ CPU. The onboard firewire adapter is a VIA controller (the chipset is the K8T800). I'm right now using kernel 2.6.15-26-amd64-k8, I'm thinking on upgrading to edgy in a month or so too. -- sbp2 hot plug causes hard crashes https://launchpad.net/bugs/28647 From alex.vice.grab at gmail.com Wed Sep 13 07:46:18 2006 From: alex.vice.grab at gmail.com (victorovitch3) Date: Wed, 13 Sep 2006 07:46:18 -0000 Subject: [Bug 42600] Re: Microphone does not work on Dell Inspiron 630m References: <20060502153431.16712.10593.malonedeb@gandwana.ubuntu.com> Message-ID: <20060913074618.30482.91596.malone@gangotri.ubuntu.com> Dear Catkiller, I'll try intstalling this alsa driver, though being so far a quite inexperienced linux user this might take some time :-) Just as a note aside: I have read in one of the support forum threads of someone installing this driver, with the result of the microphone working, however terribly (too much noise to run Skype, it appeared). Whether this is due to the hardware or due to the installation, I'll have to find out... Thank you for the advice! Victorovitch -- Microphone does not work on Dell Inspiron 630m https://launchpad.net/bugs/42600 From stefan-r-ubz at s5r6.in-berlin.de Wed Sep 13 08:10:02 2006 From: stefan-r-ubz at s5r6.in-berlin.de (Stefan Richter) Date: Wed, 13 Sep 2006 08:10:02 -0000 Subject: [Bug 28647] Re: sbp2 hot plug causes hard crashes References: <20060116010423.6087.7224.malonedeb@gangotri.ubuntu.com> Message-ID: <20060913081002.17818.67581.malone@gandwana.ubuntu.com> Re comment #7: If the enclosure overheats, I/O errors may happen but the PC should not hang. I believe these hard lockups were fixed in upstream Linux 2.6.17 + 2.6.16.2 by http://www.kernel.org/git/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=24c7cd0630f76f0eb081d539c53893d9f15787e8 -- sbp2 hot plug causes hard crashes https://launchpad.net/bugs/28647 From edpizzi at gmail.com Wed Sep 13 09:13:01 2006 From: edpizzi at gmail.com (ed_p) Date: Wed, 13 Sep 2006 09:13:01 -0000 Subject: [Bug 34902] Re: Ralink Wireless USB/PCMCIA/PCI hangs PC References: <20060314143545.30082.52680.malonedeb@gandwana.ubuntu.com> Message-ID: <20060913091301.17774.8892.malone@gandwana.ubuntu.com> Here is some additional information: Playing around in a text console, it appears that the "freeze" is caused by a kernel panic that occurs when we hit a BUG in a bh context at kernel/timer.c, line 411 (in cascade, an inline function that appears in __run_timers, which itself is an inline function that appears in run_timer_softirq, which is run in a bh context). Here's the trace I was working from. The code indicates that it's line 411 of some file: Code: ... <0f> 0b 9b 01 ee 03 30 c0 ... It panics, so I couldn't conclusively trace which file from the panic, but I think it's clearly kernel/timer.c, given the stack trace. [] run_timer_softirq+0x132/0x1d0 [] __do_softirq+0x4f/0xb0 [] do_softirq+0x35/0x40 [] irq_exit+0x35/0x40 [] do_IRQ+0x1f/0x30 [] common_interrupt+0x1a/0x20 I'm doing some testing now, as to how to fix this. Since this is a double-fault, I'm curious if we can't just disable BUG()'s in the kernel (by recompiling). I don't know if the system will recover or not - it realizes something's wrong, but we panic since it reports the BUG in BH context, not necessarily because the problem is un-recoverable. I just did a build with big-kernel-lock pre-emption (CONFIG_PREEMPT_BKL) turned off, and I didn't see any touble. So this may be a pre-emption issue. The kernel that had the problem and the one that didn't is a pretty big configuration delta, so I'm still trying to figure out what fixed it. Still looking... -- Ralink Wireless USB/PCMCIA/PCI hangs PC https://launchpad.net/bugs/34902 From till.kamppeter at gmail.com Wed Sep 13 09:22:43 2006 From: till.kamppeter at gmail.com (Till Kamppeter) Date: Wed, 13 Sep 2006 09:22:43 -0000 Subject: [Bug 6627] Re: lexmark z53 blank pages References: <20060110202826.5372.9972.malonedeb@gangotri.ubuntu.com> Message-ID: <20060913092243.17774.37329.malone@gandwana.ubuntu.com> Get the 5.0.0 final here http://www.freestandards.org/~till/tmp/ubuntu/edgy/gutenprint/binary/ and try out whether this fixes your problem. If do not have an i386-compatible platform, here are the source packages for rebuilding: http://www.freestandards.org/~till/tmp/ubuntu/edgy/gutenprint/ -- lexmark z53 blank pages https://launchpad.net/bugs/6627 From edpizzi at gmail.com Wed Sep 13 09:27:17 2006 From: edpizzi at gmail.com (ed_p) Date: Wed, 13 Sep 2006 09:27:17 -0000 Subject: [Bug 34902] Re: Ralink Wireless USB/PCMCIA/PCI hangs PC References: <20060314143545.30082.52680.malonedeb@gandwana.ubuntu.com> Message-ID: <20060913092718.30482.89815.malone@gangotri.ubuntu.com> Oh, more information, for those more interested in getting their card working than in fixing kernel bugs: I was able to get my card up by properly configuring /etc/network/interfaces manually, in the standard Ubuntu kernels, with DHCP. I can get exactly one "ifup" command through per reboot. You can also do one "ifdown" afterwards. However, on the second "ifup" the system panic's. I think the wizard does several ip-down steps, which triggers the panic. The end of my /etc/network/interfaces file, where I added wireless configs, looks like this: iface rausb0 inet dhcp wireless-essid wireless-key *Don't* declare your interface "auto" in /etc/network/interfaces, since that tells automatic processes that they can up/down that interface, which will panic your kernel. I have a simple script that checks if i've ever up'ed the card (by reading the ESSID from iwconfig), and only up's it once, and that is in my startup scripts: is_wlan_up=$(iwconfig 2>/dev/null | grep '^rausb0' | sed -e 's/^.*ESSID://' | cut -d\" -f2) [ "$is_wlan_up" ] || ifup rausb0 That was sufficient to get my D-Link DWL-g122 USB card (rt2500 based) working with Ubuntu. My network basically works at this point, but I'm curious to poke around a bit more to see what's wong. -- Ralink Wireless USB/PCMCIA/PCI hangs PC https://launchpad.net/bugs/34902 From stein.magnus at jodal.no Wed Sep 13 09:31:15 2006 From: stein.magnus at jodal.no (Stein Magnus Jodal) Date: Wed, 13 Sep 2006 09:31:15 -0000 Subject: [Bug 44959] Re: sdhci driver kills Suspend/Resume on Dell X1 References: <20060516054511.15848.15714.malonedeb@gangotri.ubuntu.com> Message-ID: <20060913093115.30564.99979.malone@gangotri.ubuntu.com> I experienced this very bug in Dapper, but cannot confirm if it is still present in Edgy (fresh install of Knot-2, regularly upgraded since) because the Dell X1 never succeeds in resuming from suspend when running Edgy. I've tried every day between Knot-2 and today after the daily upgrade. When opening the lid, the power and network lights are turned on, but the monitor remains black (no backlight) and there is no disk activity. This should probably be reported as a new bug, but I do not yet know what part of the system is causing this error. If anyone is interested in trying to fix this, I'm available for testing on my X1. -- sdhci driver kills Suspend/Resume on Dell X1 https://launchpad.net/bugs/44959 From lliyan at hotmail.com Wed Sep 13 12:55:49 2006 From: lliyan at hotmail.com (Jame) Date: Wed, 13 Sep 2006 12:55:49 -0000 Subject: [Bug 12637] Re: LCD Brightness on Laptop Always Set Very Low at Boot References: <20060113132646.21012.81619.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060913125549.30564.74587.malone@gangotri.ubuntu.com> It sounds the same problem I ever encountered. Method: Set up the brightness from the menu: System -> Preference -> Power manager ~ brightness (AC , battery) -jame -- LCD Brightness on Laptop Always Set Very Low at Boot https://launchpad.net/bugs/12637 From roy at verrips.org Wed Sep 13 13:26:02 2006 From: roy at verrips.org (Roy Verrips) Date: Wed, 13 Sep 2006 13:26:02 -0000 Subject: [Bug 56376] Re: Laptop - PCI cannot allocate resource for region 7 8 and 9 References: <20060814205122.20172.54370.malonedeb@gandwana.ubuntu.com> Message-ID: <20060913132602.30564.49746.malone@gangotri.ubuntu.com> I get this on an Acer Aspire 1642 WLMi as well ... Error Codes I get are exactly the same as on Acer Aspire 1652. The error actually pops up upon initial bootup of the kernel (before after savedefault, boot and *Reading files needed to boot) but I guess with usplash you only see it just before gdm starts - Hitting Alt-F1 during early stages of boot shows it rather clearly. I doubt it's an acpi issue as I have up to date DSDT for my model laptop, and pci=noacpi doesn't stop the error from appearing. I believe issue is related to PCI Express Port Recently updated to Edgy Knot 2 with Kernel 2.6.17-7-generic and error still present. As mentioned, no issues caused by this that I know of, but confidence drops when you see an error message everytime you startup your Laptop ... -- [Dapper 6.06] Laptop - PCI cannot allocate resource for region 7 8 and 9 https://launchpad.net/bugs/56376 From bernado_tornado at gmx.de Wed Sep 13 16:47:50 2006 From: bernado_tornado at gmx.de (=?utf-8?q?=22Kosmonaut=22_Bernd_M=C3=BCller?=) Date: Wed, 13 Sep 2006 16:47:50 -0000 Subject: =?utf-8?q?=5BBug_53813=5D_Re=3A_kernel_doesn=C2=B4t_support_Sony_d?= =?utf-8?q?sc-w5_anymore?= References: <20060723110756.11169.28683.malonedeb@gandwana.ubuntu.com> Message-ID: <20060913164750.30482.25142.malone@gangotri.ubuntu.com> The USB PTP methode was exactly the way I used to connect my Sony dsc-w5 to my computer -via digiKam. BTW both ways USB Storage and PTP worked fine. -- kernel doesn´t support Sony dsc-w5 anymore https://launchpad.net/bugs/53813 From msandersen at tpg.com.au Wed Sep 13 16:52:41 2006 From: msandersen at tpg.com.au (Martin Andersen) Date: Wed, 13 Sep 2006 16:52:41 -0000 Subject: [Bug 21412] Re: Default update-grub behaviour is not intuitive with respect to user modifications References: <20060113141241.21012.46008.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060913165241.30564.52867.malone@gangotri.ubuntu.com> Adding the Windows boot options before the Automagic lines results in the Splashimage not appearing, so the bootlist really has to come after all the options, so there is no proper way of reordering the bootlist with anything before Ubuntu. -- Default update-grub behaviour is not intuitive with respect to user modifications https://launchpad.net/bugs/21412 From gene_hoffler at yahoo.com Wed Sep 13 17:34:10 2006 From: gene_hoffler at yahoo.com (Gene Hoffler) Date: Wed, 13 Sep 2006 17:34:10 -0000 Subject: [Bug 12637] Re: [Bug 12637] Re: LCD Brightness on Laptop Always Set Very Low at Boot References: <20060113132646.21012.81619.launchpad@macquarie.warthogs.hbd.com> <20060913125549.30564.74587.malone@gangotri.ubuntu.com> Message-ID: <20060913173410.81726.qmail@web33402.mail.mud.yahoo.com> Thanks. I sold the Gateway 7405GX laptop with that issue. Overall, it was a low-quality piece of junk. No more Gateways for me. --- Jame wrote: > It sounds the same problem I ever encountered. > > Method: Set up the brightness from the menu: > System -> Preference -> Power manager ~ brightness > (AC , battery) > > -jame > > -- > LCD Brightness on Laptop Always Set Very Low at Boot > https://launchpad.net/bugs/12637 > -- LCD Brightness on Laptop Always Set Very Low at Boot https://launchpad.net/bugs/12637 From venom2001 at mail.ru Wed Sep 13 19:13:35 2006 From: venom2001 at mail.ru (Glebushka) Date: Wed, 13 Sep 2006 19:13:35 -0000 Subject: [Bug 45636] Re: dapper on toshiba sat. m70: gnome immediately freezes with new kernels (incl. 2.6.15-23-386/686) References: <20060519181444.18604.677.malonedeb@gandwana.ubuntu.com> Message-ID: <20060913191335.17774.37042.malone@gandwana.ubuntu.com> Sorry for repeating, but i have to write that current alternate edgy install downloaded yesterday worked just fine and allowed to load x-window after installing current fglrx driver as described here http://ubuntuforums.org/showthread.php?t=230565&highlight=toshiba+m70 -- dapper on toshiba sat. m70: gnome immediately freezes with new kernels (incl. 2.6.15-23-386/686) https://launchpad.net/bugs/45636 From dana at ubuntustudio.com Wed Sep 13 19:16:17 2006 From: dana at ubuntustudio.com (Dana Olson) Date: Wed, 13 Sep 2006 19:16:17 -0000 Subject: [Bug 59983] Re: ndiswrapper in edgy broken References: <20060911235728.16647.6163.malonedeb@gangotri.ubuntu.com> Message-ID: <20060913191617.30482.87741.malone@gangotri.ubuntu.com> I also have this issue. ** Changed in: ndiswrapper (Ubuntu) Status: Unconfirmed => Confirmed -- ndiswrapper in edgy broken https://launchpad.net/bugs/59983 From hidden at wolfstep.cc Wed Sep 13 20:40:43 2006 From: hidden at wolfstep.cc (Uriel) Date: Wed, 13 Sep 2006 20:40:43 -0000 Subject: [Bug 38865] Re: sky2 driver freezing system after ifdown and ifup References: <20060409125752.32313.97119.malonedeb@gandwana.ubuntu.com> Message-ID: <20060913204043.30564.63792.malone@gangotri.ubuntu.com> Hello all, i had the same problem in the past, then i tried to understand what's was going on the network ,and then i was able to solve the problem for me. Problem is this stupid module is going bad with autonegotiation with some switches (sure with mine!). I solved my problem (i'm using one Toshiba Tecra A3 to write, with such adapter:) )simply writing ethtool -s eth0 autoneg off then , the problem has ceased. So, i believe the problem when downloading large files happens with autonegotiation, but i can't be more precise. hope being useful, Uriel -- sky2 driver freezing system after ifdown and ifup https://launchpad.net/bugs/38865 From notigg at gmail.com Wed Sep 13 22:09:59 2006 From: notigg at gmail.com (JosephWoodbridge) Date: Wed, 13 Sep 2006 22:09:59 -0000 Subject: [Bug 60313] ndiswrapper in modprobe.d causes system to semi-hang during login References: <20060913220959.30482.70524.malonedeb@gangotri.ubuntu.com> Message-ID: <20060913220959.30482.70524.malonedeb@gangotri.ubuntu.com> Public bug reported: I use ndiswrapper for my broadcom wifi. It works fine.. except when i type: ndiswrapper -m to write it to /etc/modprobe.d ... because if i do the system will stall for about 5 minutes the next boot up while loading gnome (after the loginpassword screen) if i modprobe after gnome loads it works instantly and everything is fine. ** Affects: ndiswrapper (Ubuntu) Importance: Untriaged Status: Unconfirmed -- ndiswrapper in modprobe.d causes system to semi-hang during login https://launchpad.net/bugs/60313 From notigg at gmail.com Wed Sep 13 22:15:37 2006 From: notigg at gmail.com (JosephWoodbridge) Date: Wed, 13 Sep 2006 22:15:37 -0000 Subject: [Bug 60317] neither sudo gedit, nor gksudo gedit work References: <20060913221537.30564.69053.malonedeb@gangotri.ubuntu.com> Message-ID: <20060913221537.30564.69053.malonedeb@gangotri.ubuntu.com> Public bug reported: When i type : sudo gedit , nothing happens and i have to press control c to get back to prompt. when i type gksudo gedit, it says this: GnomeUI-WARNING **: While connecting to session manager: Authentication Rejected, reason : None of the authentication protocols specified are supported and host-based authentication failed. The application 'gedit' lost its connection to the display :0.0; most likely the X server was shut down or you killed/destroyed the application. " and it never finishes loading. basically im stuck using vim . Ubuntu dapper edit: Btw, sudo nano works fine. ** Affects: ndiswrapper (Ubuntu) Importance: Untriaged Status: Unconfirmed ** Affects: sudo (Ubuntu) Importance: Untriaged Status: Unconfirmed ** Description changed: When i type : sudo gedit , nothing happens and i have to press control c to get back to prompt. when i type gksudo gedit, it says this: GnomeUI-WARNING **: While connecting to session manager: Authentication Rejected, reason : None of the authentication protocols specified are supported and host-based authentication failed. The application 'gedit' lost its connection to the display :0.0; most likely the X server was shut down or you killed/destroyed the application. " and it never finishes loading. basically im stuck using vim . Ubuntu dapper + + edit: Btw, sudo nano works fine. ** Also affects: sudo (Ubuntu) Importance: Untriaged Status: Unconfirmed -- neither sudo gedit, nor gksudo gedit work https://launchpad.net/bugs/60317 From jos_dehaes at fastmail.fm Wed Sep 13 23:06:09 2006 From: jos_dehaes at fastmail.fm (Jos Dehaes) Date: Wed, 13 Sep 2006 23:06:09 -0000 Subject: [Bug 60323] kernel crash on resume from S3 suspend References: <20060913230609.17818.3007.malonedeb@gandwana.ubuntu.com> Message-ID: <20060913230609.17818.3007.malonedeb@gandwana.ubuntu.com> Public bug reported: Binary package hint: linux-image-2.6-686-smp Hi, I have a D820 latitude, which works fine under dapper. Suspend/resume is a bit hit or miss, a few times it works fine, then it fails, then again a few times ok. I have noticed a kernel crash at resume time. Here is the stacktrace (note this is a dual core machine, maybe that is a clue?): Sep 13 11:01:20 localhost kernel: [34105.144000] ------------[ cut here ]------------ Sep 13 11:01:20 localhost kernel: [34105.144000] kernel BUG at drivers/scsi/libata-core.c:1099! Sep 13 11:01:20 localhost kernel: [34105.144000] invalid operand: 0000 [#1] Sep 13 11:01:20 localhost kernel: [34105.144000] PREEMPT SMP Sep 13 11:01:20 localhost kernel: [34105.144000] Modules linked in: acpi_sbs i2c_acpi_ec battery ac thermal fan button michael_mic arc4 ieee80211_crypt_tkip af_packet binfmt_misc rfcomm l2cap bluetooth ipv6 irtty_sir sir_dev ppdev speedstep_centrino cpufreq_userspace cpufreq_stats freq_table cpufreq_powersave cpufreq_ondemand cpufreq_conservative video tc1100_wmi sony_acpi pcc_acpi hotkey dev_acpi container irda crc_ccitt dm_mod md_mod sbp2 parport_pc lp parport joydev pcmcia tsdev pcspkr ieee80211_crypt yenta_socket rsrc_nonstatic psmouse serio_raw pcmcia_core nvidia i2c_core snd_hda_intel snd_hda_codec intel_agp agpgart snd_pcm_oss snd_mixer_oss snd_pcm snd_timer hw_random snd soundcore snd_page_alloc shpchp pci_hotplug evdev sr_mod cdrom sg ext3 jbd ide_generic ohci1394 ieee1394 usbcore sd_mod generic ata_piix libata scsi_mod processor capability commoncap vesafb fbcon tileblit font bitblit softcursor Sep 13 11:01:20 localhost kernel: [34105.144000] CPU: 0 Sep 13 11:01:20 localhost kernel: [34105.144000] EIP: 0060:[pg0+947023345/1069167616] Tainted: P VLI Sep 13 11:01:20 localhost kernel: [34105.144000] EFLAGS: 00210046 (2.6.15-26-686) Sep 13 11:01:20 localhost kernel: [34105.144000] EIP is at ata_exec_internal+0x1a1/0x1b0 [libata] Sep 13 11:01:20 localhost kernel: [34105.144000] eax: 00000000 ebx: c235ff38 ecx: 00000000 edx: dfd5f2cc Sep 13 11:01:20 localhost kernel: [34105.144000] esi: 00000000 edi: 00000200 ebp: dfd5f2cc esp: c235feb4 Sep 13 11:01:20 localhost kernel: [34105.144000] ds: 007b es: 007b ss: 0068 Sep 13 11:01:20 localhost kernel: [34105.144000] Process kacpid-work-5 (pid: 8844, threadinfo=c235e000 task=f5d17560) Sep 13 11:01:20 localhost kernel: [34105.144000] Stack: dfd5f2cc dfd5f350 dfd5f2cc a101869f 00200202 00000000 00000001 00000000 Sep 13 11:01:20 localhost kernel: [34105.144000] c235fed4 c235fed4 00000001 c235ff38 dfd5f350 c235ff4c dfd5f364 f8b81fdb Sep 13 11:01:20 localhost kernel: [34105.144000] dfd5f2cc dfd5f350 c235ff38 00000002 dfd5f364 00000200 c235ff18 dfd5f57c Sep 13 11:01:20 localhost kernel: [34105.144000] Call Trace: Sep 13 11:01:20 localhost kernel: [34105.144000] [pg0+947023835/1069167616] ata_dev_identify+0x11b/0x580 [libata] Sep 13 11:01:20 localhost kernel: [34105.144000] [pg0+947022463/1069167616] ata_std_dev_select+0x4f/0x60 [libata] Sep 13 11:01:20 localhost kernel: [34105.144000] [pg0+947025197/1069167616] ata_bus_probe+0x3d/0xc0 [libata] Sep 13 11:01:20 localhost kernel: [34105.144000] [acpi_os_execute_worker+0/206] acpi_os_execute_worker+0x0/0xce Sep 13 11:01:20 localhost kernel: [34105.144000] [pg0+947063138/1069167616] libata_acpi_notify+0x52/0x80 [libata] Sep 13 11:01:20 localhost kernel: [34105.144000] [acpi_ev_notify_dispatch+78/91] acpi_ev_notify_dispatch+0x4e/0x5b Sep 13 11:01:20 localhost kernel: [34105.144000] [acpi_os_execute_worker+159/206] acpi_os_execute_worker+0x9f/0xce Sep 13 11:01:20 localhost kernel: [34105.144000] [default_wake_function+0/32] default_wake_function+0x0/0x20 Sep 13 11:01:20 localhost kernel: [34105.144000] [kthread+200/208] kthread+0xc8/0xd0 Sep 13 11:01:20 localhost kernel: [34105.144000] [kthread+0/208] kthread+0x0/0xd0 Sep 13 11:01:20 localhost kernel: [34105.144000] [kernel_thread_helper+5/16] kernel_thread_helper+0x5/0x10 Sep 13 11:01:20 localhost kernel: [34105.144000] Code: 86 8c 00 00 00 89 34 24 e8 bd 33 00 00 0f b6 44 24 0f 89 44 24 08 8b 45 0c c7 04 24 d8 be b8 f8 89 44 24 04 e8 81 30 5a c7 eb a5 <0f> 0b 4b 04 c2 cf b8 f8 e9 cb fe ff ff 89 f6 56 ba 4c 1d 00 00 Sep 13 11:01:20 localhost kernel: [34105.144000] <6>note: kacpid-work-5[8844] exited with preempt_count 1 This is a clean reinstall of dapper from yesterday. Here is the contents of /etc/default/acpi-support: jos at duet:~$ cat /etc/default/acpi-support # Uncomment the next line to enable ACPI suspend to RAM ACPI_SLEEP=true # Comment the next line to disable suspend to disk #ACPI_HIBERNATE=true # Change the following to "standby" to use ACPI S1 sleep, rather than S3. # This will save less power, but may work on more machines ACPI_SLEEP_MODE=mem # Add modules to this list to have them removed before suspend and reloaded # on resume. An example would be MODULES="em8300 yenta_socket" # # Note that network cards and USB controllers will automatically be unloaded # unless they're listed in MODULES_WHITELIST MODULES="uhci_hcd ehci_hcd" # Add modules to this list to leave them in the kernel over suspend/resume MODULES_WHITELIST="" # Should we save and restore state using the VESA BIOS Extensions? #SAVE_VBE_STATE=true # The file that we use to save the vbestate VBESTATE=/var/lib/acpi-support/vbestate # Should we attempt to warm-boot the video hardware on resume? POST_VIDEO=false # Save and restore video state? SAVE_VIDEO_PCI_STATE=true # Should we switch the screen off with DPMS on suspend? USE_DPMS=true # Use Radeontool to switch the screen off? Seems to be needed on some machines # RADEON_LIGHT=true # Uncomment the next line to switch away from X and back again after resume. # This is needed for some hardware, but should be unnecessary on most. DOUBLE_CONSOLE_SWITCH=true # Set the following to "platform" if you want to use ACPI to shut down # your machine on hibernation HIBERNATE_MODE=shutdown # Comment this out to disable screen locking on resume LOCK_SCREEN=true # Uncomment this line to have DMA disabled before suspend and reenabled # afterwards # DISABLE_DMA=true # Uncomment this line to attempt to reset the drive on resume. This seems # to be needed for some Sonys RESET_DRIVE=true # Add services to this list to stop them before suspend and restart them in # the resume process. STOP_SERVICES=" " # Restart Infra Red services on resume - off by default as it crashes some # machines RESTART_IRDA=false # Switch to laptop-mode on battery power - off by default as it causes odd # hangs on some machines ENABLE_LAPTOP_MODE=false jos at duet:~$ ** Affects: linux-meta (Ubuntu) Importance: Untriaged Status: Unconfirmed -- kernel crash on resume from S3 suspend https://launchpad.net/bugs/60323 From launchpad.listswill at recursor.net Thu Sep 14 02:04:01 2006 From: launchpad.listswill at recursor.net (willnapier) Date: Thu, 14 Sep 2006 02:04:01 -0000 Subject: [Bug 57502] Re: JMicron PATA/SATA Controller does not work References: <20060823192235.13463.13121.malonedeb@gandwana.ubuntu.com> Message-ID: <20060914020401.30482.54327.malone@gangotri.ubuntu.com> I also confirm the bug. I can't use linux! I would like to second the previous post.. will the fix be in Edgy and how will we know? -- JMicron PATA/SATA Controller does not work https://launchpad.net/bugs/57502 From psientist at gmail.com Thu Sep 14 06:16:06 2006 From: psientist at gmail.com (discord) Date: Thu, 14 Sep 2006 06:16:06 -0000 Subject: [Bug 59983] Re: ndiswrapper in edgy broken References: <20060911235728.16647.6163.malonedeb@gangotri.ubuntu.com> Message-ID: <20060914061607.30482.78645.malone@gangotri.ubuntu.com> I have a possible solution. try typing ndiswrapper-1.8 . If it works then delete /usr/sbin/ndiswrapper and make a link ln -s /usr/sbin/ndiwswrapper-1.8 /usr/sbin/ndiswrapper ... -- ndiswrapper in edgy broken https://launchpad.net/bugs/59983 From dennis at kaarsemaker.net Thu Sep 14 09:41:47 2006 From: dennis at kaarsemaker.net (Dennis Kaarsemaker) Date: Thu, 14 Sep 2006 09:41:47 -0000 Subject: [Bug 60317] Re: neither sudo gedit, nor gksudo gedit work References: <20060913221537.30564.69053.malonedeb@gangotri.ubuntu.com> Message-ID: <20060914094147.17774.55328.malone@gandwana.ubuntu.com> Nothing to do with ndiswrapper... ** Changed in: ndiswrapper (Ubuntu) Status: Unconfirmed => Rejected -- neither sudo gedit, nor gksudo gedit work https://launchpad.net/bugs/60317 From diegoeb at yahoo.com Thu Sep 14 09:57:56 2006 From: diegoeb at yahoo.com (diebuntu) Date: Thu, 14 Sep 2006 09:57:56 -0000 Subject: [Bug 43745] Re: Ubuntu corrupts real time clock on some dell laptops References: <20060509053346.20684.57755.malonedeb@gangotri.ubuntu.com> Message-ID: <20060914095756.30564.17434.malone@gangotri.ubuntu.com> Hi, first of all sorry for my bad english!! When I'was booting my Dapper 6.06 on my Dell Optiplex SX280 for the first time, i got the well known "select() to /dev/rtc to wait for clock tick timed out" problem. I decided to upgrade the SX280 BIOS from rev. A04 to A08 before trying anything else. ¡And it worked fine! Now my Dapper boots with no problem. -- Ubuntu corrupts real time clock on some dell laptops https://launchpad.net/bugs/43745 From benjamin at lebsanft.org Thu Sep 14 10:06:07 2006 From: benjamin at lebsanft.org (Benjamin_L) Date: Thu, 14 Sep 2006 10:06:07 -0000 Subject: [Bug 58742] Re: [edgy] Important dvb-ttpci modules are missing in edgy! References: <20060903185009.30981.88325.malonedeb@gandwana.ubuntu.com> Message-ID: <20060914100608.17774.51057.malone@gandwana.ubuntu.com> What replaces those "deprecated" interfaces? -- [edgy] Important dvb-ttpci modules are missing in edgy! https://launchpad.net/bugs/58742 From david at bridson.co.uk Thu Sep 14 11:04:18 2006 From: david at bridson.co.uk (David Bridson) Date: Thu, 14 Sep 2006 11:04:18 -0000 Subject: [Bug 58742] Re: [edgy] Important dvb-ttpci modules are missing in edgy! References: <20060903185009.30981.88325.malonedeb@gandwana.ubuntu.com> Message-ID: <20060914110418.28435.95763.malone@gandwana.ubuntu.com> Video4Linux 1 was replaced by Video4Linux 2. However, quite a number of drivers and applications still rely on the old Video4Linux 1 interface. -- [edgy] Important dvb-ttpci modules are missing in edgy! https://launchpad.net/bugs/58742 From benjamin at lebsanft.org Thu Sep 14 11:22:33 2006 From: benjamin at lebsanft.org (Benjamin_L) Date: Thu, 14 Sep 2006 11:22:33 -0000 Subject: [Bug 58742] Re: [edgy] Important dvb-ttpci modules are missing in edgy! References: <20060903185009.30981.88325.malonedeb@gandwana.ubuntu.com> Message-ID: <20060914112233.21257.38829.malone@gangotri.ubuntu.com> I see. But it would be nice if this bug could be fixed quickly as watching tv or using my tv card at all would be quite nice :) -- [edgy] Important dvb-ttpci modules are missing in edgy! https://launchpad.net/bugs/58742 From alfred.s at nexicom.net Thu Sep 14 12:29:22 2006 From: alfred.s at nexicom.net (Alfred) Date: Thu, 14 Sep 2006 12:29:22 -0000 Subject: [Bug 52649] Re: VIA IRQ quirk changes in 2.6.15-26.44 have broken various VIA devices References: <20060711150321.27257.34756.malonedeb@gangotri.ubuntu.com> Message-ID: <20060914122922.28479.3491.malone@gandwana.ubuntu.com> I have an Asrock K7S41GX/E/M/ASR mb and noticed this Problem too! I'm moving to Simply Mepis 6.1 DVD because Ubuntu 5.10 and 6.06.1 both became totally unusable after the upgrades! 5.10 will not even boot, because of a manual fix EXT-3 Partition Problem, and if that should ever get fixed, Open Office freezes, on 3 Characters input in Writer. 6.06.1 the sound does not work, the video is very slow. No printer I have works anymore, even after Upgrades, and a Bug List upgrade that was supposed to fix the problem (Ante K.) Open GL does not work anymore. Ubuntu was very nice, to start with, but the upgrades made it "Real Bad!" Perhaps in six months I'll come back and see if these problems got fixed! Alfred! -- VIA IRQ quirk changes in 2.6.15-26.44 have broken various VIA devices https://launchpad.net/bugs/52649 From lliyan at hotmail.com Thu Sep 14 12:29:20 2006 From: lliyan at hotmail.com (Jame) Date: Thu, 14 Sep 2006 12:29:20 -0000 Subject: [Bug 35319] Re: Can't awake from suspend or hibenation References: <20060317124552.11105.6446.malonedeb@gandwana.ubuntu.com> Message-ID: <20060914122920.28479.7825.launchpad@gandwana.ubuntu.com> ** Summary changed: - no Fn at all Vaio SZ1XP Dapper + Can't awake from suspend or hibenation ** Description changed: - This is a rather new Sony Vaio SZ1XP (very similar to SZ110 model). + System: + Ubuntu LTS 6.06 - I don't get to work the Fn+something keys at all. No S1 nor S2 keys - neither. Power button works. + Machine: + 1. Sony Vaio SZ1XP + 2. IBM Thinkpad T2x - No /var/log/acpid messages at all when pressing them... - - Ideas? + Problem: + I can properly lock the screen and reopen it. But I can't awake it from suspend and hibenation. Power on, no key useful, I have to reboot after cutting down AC and battery. -- Can't awake from suspend or hibenation https://launchpad.net/bugs/35319 From lliyan at hotmail.com Thu Sep 14 12:47:45 2006 From: lliyan at hotmail.com (Jame) Date: Thu, 14 Sep 2006 12:47:45 -0000 Subject: [Bug 35319] Re: Can't awake from suspend or hibernation References: <20060317124552.11105.6446.malonedeb@gandwana.ubuntu.com> Message-ID: <20060914124745.28479.84002.launchpad@gandwana.ubuntu.com> ** Summary changed: - Can't awake from suspend or hibenation + Can't awake from suspend or hibernation ** Description changed: System: Ubuntu LTS 6.06 Machine: 1. Sony Vaio SZ1XP 2. IBM Thinkpad T2x Problem: - I can properly lock the screen and reopen it. But I can't awake it from suspend and hibenation. Power on, no key useful, I have to reboot after cutting down AC and battery. + I can properly lock the screen and reopen it. But I can't awake it from suspend and hibernation. Power on, no key useful, I have to reboot after cutting down AC and battery. -- Can't awake from suspend or hibernation https://launchpad.net/bugs/35319 From ubuntu at paul.sladen.org Thu Sep 14 13:04:12 2006 From: ubuntu at paul.sladen.org (Paul Sladen) Date: Thu, 14 Sep 2006 13:04:12 -0000 Subject: [Bug 35319] Re: Can't awake from suspend or hibernation References: <20060317124552.11105.6446.malonedeb@gandwana.ubuntu.com> Message-ID: <20060914130413.28762.5066.malone@gandwana.ubuntu.com> This bug is getting quite hard to follow up: (a) It regards two completely unrelated laptops from separate manufacturers. (b) The bug has changed from being able resume failure to being about Fn keys not working. We may be better closing this bug and transferring the information to a pair (or more) of separate bugs for each of the types of laptop mentioned above. 'Fn' working and suspend/hibernation are also not the same bug even if they tend to be coupled together. -- Can't awake from suspend or hibernation https://launchpad.net/bugs/35319 From dennis at kaarsemaker.net Thu Sep 14 13:03:16 2006 From: dennis at kaarsemaker.net (Dennis Kaarsemaker) Date: Thu, 14 Sep 2006 13:03:16 -0000 Subject: [Bug 59795] Re: Ubiquity crashes 6.06 on Installation References: <20060910161317.16587.88598.malonedeb@gangotri.ubuntu.com> Message-ID: <20060914130317.30879.61509.launchpad@gangotri.ubuntu.com> ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Unconfirmed => Rejected -- Ubiquity crashes 6.06 on Installation https://launchpad.net/bugs/59795 From dennis at kaarsemaker.net Thu Sep 14 12:57:51 2006 From: dennis at kaarsemaker.net (Dennis Kaarsemaker) Date: Thu, 14 Sep 2006 12:57:51 -0000 Subject: [Bug 59795] Re: [Bug 59795] Re: [Bug 59795] Re: Ubiquity crashes 6.06 on Installation References: <20060910161317.16587.88598.malonedeb@gangotri.ubuntu.com> <20060911100809.12796.3713.malone@gandwana.ubuntu.com> <4505B68A.5030001@censeoit.com> Message-ID: <1158238671.30921.15.camel@mirage> status Rejected Thank you for following up. Please don't hesitate to file bug reports if this happens again or if you find other bugs. -- Ubiquity crashes 6.06 on Installation https://launchpad.net/bugs/59795 From scott at ubuntu.com Thu Sep 14 14:14:55 2006 From: scott at ubuntu.com (Scott James Remnant) Date: Thu, 14 Sep 2006 14:14:55 -0000 Subject: [Bug 51369] Re: Changes root device path without migrating fstab References: <20060630035353.17054.64557.malonedeb@gangotri.ubuntu.com> Message-ID: <20060914141455.28890.21764.malone@gangotri.ubuntu.com> fstab migration is in place ** Changed in: linux-source-2.6.17 (Ubuntu) Status: Confirmed => Fix Released -- Changes root device path without migrating fstab https://launchpad.net/bugs/51369 From ben.collins at ubuntu.com Thu Sep 14 15:18:22 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Thu, 14 Sep 2006 15:18:22 -0000 Subject: [Bug 60323] Re: kernel crash on resume from S3 suspend References: <20060913230609.17818.3007.malonedeb@gandwana.ubuntu.com> Message-ID: <20060914151822.28762.17945.malone@gandwana.ubuntu.com> Please provide entire dmesg output, and the output from the following commands: lcpci -vv lcpci -vvn lsmod ** Changed in: linux-meta (Ubuntu) Sourcepackagename: linux-meta => linux-source-2.6.15 ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Unconfirmed => Needs Info -- kernel crash on resume from S3 suspend https://launchpad.net/bugs/60323 From ben.collins at ubuntu.com Thu Sep 14 15:17:26 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Thu, 14 Sep 2006 15:17:26 -0000 Subject: [Bug 28647] Re: sbp2 hot plug causes hard crashes References: <20060116010423.6087.7224.malonedeb@gangotri.ubuntu.com> Message-ID: <20060914151726.28890.25968.launchpad@gangotri.ubuntu.com> ** Changed in: linux-source-2.6.15 (Ubuntu) Assignee: (unassigned) => Ben Collins Status: Confirmed => Fix Committed -- sbp2 hot plug causes hard crashes https://launchpad.net/bugs/28647 From jos_dehaes at fastmail.fm Thu Sep 14 15:36:28 2006 From: jos_dehaes at fastmail.fm (Jos Dehaes) Date: Thu, 14 Sep 2006 15:36:28 -0000 Subject: [Bug 60323] Re: kernel crash on resume from S3 suspend References: <20060913230609.17818.3007.malonedeb@gandwana.ubuntu.com> Message-ID: <20060914153628.28890.45478.malone@gangotri.ubuntu.com> ** Attachment added: "lspci -vvn output" http://librarian.launchpad.net/4272044/lspcivvn.log -- kernel crash on resume from S3 suspend https://launchpad.net/bugs/60323 From jos_dehaes at fastmail.fm Thu Sep 14 15:36:08 2006 From: jos_dehaes at fastmail.fm (Jos Dehaes) Date: Thu, 14 Sep 2006 15:36:08 -0000 Subject: [Bug 60323] Re: kernel crash on resume from S3 suspend References: <20060913230609.17818.3007.malonedeb@gandwana.ubuntu.com> Message-ID: <20060914153608.28762.9153.malone@gandwana.ubuntu.com> ** Attachment added: "lspci -vv output" http://librarian.launchpad.net/4272043/lspcivv.log -- kernel crash on resume from S3 suspend https://launchpad.net/bugs/60323 From jos_dehaes at fastmail.fm Thu Sep 14 15:35:44 2006 From: jos_dehaes at fastmail.fm (Jos Dehaes) Date: Thu, 14 Sep 2006 15:35:44 -0000 Subject: [Bug 60323] Re: kernel crash on resume from S3 suspend References: <20060913230609.17818.3007.malonedeb@gandwana.ubuntu.com> Message-ID: <20060914153544.28762.14517.malone@gandwana.ubuntu.com> ** Attachment added: "lsmod output" http://librarian.launchpad.net/4272041/lsmod.log -- kernel crash on resume from S3 suspend https://launchpad.net/bugs/60323 From jos_dehaes at fastmail.fm Thu Sep 14 15:47:36 2006 From: jos_dehaes at fastmail.fm (Jos Dehaes) Date: Thu, 14 Sep 2006 15:47:36 -0000 Subject: [Bug 60323] Re: kernel crash on resume from S3 suspend References: <20060913230609.17818.3007.malonedeb@gandwana.ubuntu.com> Message-ID: <20060914154736.28890.98886.malone@gangotri.ubuntu.com> ** Attachment added: "piece from /var/log/kern.log" http://librarian.launchpad.net/4272057/kern.log -- kernel crash on resume from S3 suspend https://launchpad.net/bugs/60323 From eduardo.alvarenga at gmail.com Thu Sep 14 16:55:43 2006 From: eduardo.alvarenga at gmail.com (Eduardo Alvarenga) Date: Thu, 14 Sep 2006 16:55:43 -0000 Subject: [Bug 60433] Binary Nvidia drivers not loaded after upgrade to linux-image-2.6.15-26-686 2.6.15-26.***47*** (USN-346-1) References: <20060914165543.28823.31997.malonedeb@gangotri.ubuntu.com> Message-ID: <20060914165543.28823.31997.malonedeb@gangotri.ubuntu.com> Public bug reported: Binary package hint: linux-image-2.6-686 After an upgrade to the latest 2.6.15 kernel (usn-346-1) the nvidia-glx 1.0.8762+2.6.15.11-3, nvidia-kernel-common 20051028+1 drivers are not loaded anymore giving and error, and consequently X is not started. Sep 14 13:23:02 eduardo kernel: [17179596.644000] nvidia: disagrees about version of symbol boot_cpu_data Sep 14 13:23:02 eduardo kernel: [17179596.644000] nvidia: Unknown symbol boot_cpu_data The only way to make the card work is to downgrade to the the 2.6.15-26.***46*** linux-image. ** Affects: linux-meta (Ubuntu) Importance: Untriaged Status: Unconfirmed ** Description changed: Binary package hint: linux-image-2.6-686 - After and upgrade to the latest 2.6.15 kernel (usn-346-1) the nvidia-glx + After an upgrade to the latest 2.6.15 kernel (usn-346-1) the nvidia-glx 1.0.8762+2.6.15.11-3, nvidia-kernel-common 20051028+1 drivers are not loaded anymore giving and error, and consequently X is not started. Sep 14 13:23:02 eduardo kernel: [17179596.644000] nvidia: disagrees about version of symbol boot_cpu_data Sep 14 13:23:02 eduardo kernel: [17179596.644000] nvidia: Unknown symbol boot_cpu_data The only way to make the card work is to downgrade to the the 2.6.15-26.***46*** linux-image. -- Binary Nvidia drivers not loaded after upgrade to linux-image-2.6.15-26-686 2.6.15-26.***47*** (USN-346-1) https://launchpad.net/bugs/60433 From pedromj at gmail.com Thu Sep 14 16:59:17 2006 From: pedromj at gmail.com (=?utf-8?q?Pedro_Mart=C3=ADnez_Juli=C3=A1?=) Date: Thu, 14 Sep 2006 16:59:17 -0000 Subject: [Bug 31293] Re: My laptop doesn't resume from S3 ACPI sleep state. References: <20060213101035.1233.41596.malonedeb@gandwana.ubuntu.com> Message-ID: <20060914165917.28941.5842.malone@gandwana.ubuntu.com> It's fixed for linux-source-2.6.15, for linux (upstream) too. ** Changed in: linux (upstream) Status: Unconfirmed => Fix Released -- My laptop doesn't resume from S3 ACPI sleep state. https://launchpad.net/bugs/31293 From pedromj at gmail.com Thu Sep 14 17:00:04 2006 From: pedromj at gmail.com (=?utf-8?q?Pedro_Mart=C3=ADnez_Juli=C3=A1?=) Date: Thu, 14 Sep 2006 17:00:04 -0000 Subject: [Bug 31293] Re: My laptop doesn't resume from S3 ACPI sleep state. References: <20060213101035.1233.41596.malonedeb@gandwana.ubuntu.com> Message-ID: <20060914170004.28890.28408.malone@gangotri.ubuntu.com> Fixed in dapper kerenl, fixed in linux-meta too. ** Changed in: linux-meta (Ubuntu) Status: Rejected => Fix Released -- My laptop doesn't resume from S3 ACPI sleep state. https://launchpad.net/bugs/31293 From pedromj at gmail.com Thu Sep 14 17:06:33 2006 From: pedromj at gmail.com (=?utf-8?q?Pedro_Mart=C3=ADnez_Juli=C3=A1?=) Date: Thu, 14 Sep 2006 17:06:33 -0000 Subject: [Bug 42387] Re: ipw2200 module can't be reloaded if its status was set to 2 References: <20060501135849.30638.69331.malonedeb@gangotri.ubuntu.com> Message-ID: <20060914170633.28941.34992.malone@gandwana.ubuntu.com> I still have this problem, after firmware/ucode error I watched power state and it was "0". I can't propperly reload the module, I have to reboot. I'ts very annoying. ¿Anyone happends this too? -- ipw2200 module can't be reloaded if its status was set to 2 https://launchpad.net/bugs/42387 From raizyr at gmail.com Thu Sep 14 17:19:31 2006 From: raizyr at gmail.com (raizyr) Date: Thu, 14 Sep 2006 17:19:31 -0000 Subject: [Bug 60433] Re: Binary Nvidia drivers not loaded after upgrade to linux-image-2.6.15-26-686 2.6.15-26.***47*** (USN-346-1) References: <20060914165543.28823.31997.malonedeb@gangotri.ubuntu.com> Message-ID: <20060914171931.28941.90723.malone@gandwana.ubuntu.com> I'm having the same problem, nvidia drivers in linux-restricted- modules-2.6.15-26-686 and linux-image-2.6.15-26-686 don't have the same version symbols -- Binary Nvidia drivers not loaded after upgrade to linux-image-2.6.15-26-686 2.6.15-26.***47*** (USN-346-1) https://launchpad.net/bugs/60433 From meff at pobox.com Thu Sep 14 17:32:47 2006 From: meff at pobox.com (Rodney Gordon II) Date: Thu, 14 Sep 2006 17:32:47 -0000 Subject: [Bug 60433] Re: Binary Nvidia drivers not loaded after upgrade to linux-image-2.6.15-26-686 2.6.15-26.***47*** (USN-346-1) References: <20060914165543.28823.31997.malonedeb@gangotri.ubuntu.com> Message-ID: <20060914173247.28762.5287.malone@gandwana.ubuntu.com> Same here.. This is a BIG problem. I had to hand compile a 8762 module :/ P-D 830 3.0GHz Dual-core, nV 6600 256mb, 1536mb RAM. -- Binary Nvidia drivers not loaded after upgrade to linux-image-2.6.15-26-686 2.6.15-26.***47*** (USN-346-1) https://launchpad.net/bugs/60433 From eduardo.alvarenga at gmail.com Thu Sep 14 17:30:37 2006 From: eduardo.alvarenga at gmail.com (Eduardo Alvarenga) Date: Thu, 14 Sep 2006 17:30:37 -0000 Subject: [Bug 60433] Re: [Bug 60433] Re: Binary Nvidia drivers not loaded after upgrade to linux-image-2.6.15-26-686 2.6.15-26.***47*** (USN-346-1) References: <20060914165543.28823.31997.malonedeb@gangotri.ubuntu.com> <20060914171931.28941.90723.malone@gandwana.ubuntu.com> Message-ID: <42caf4d40609141030oe0b52c2i61424913750fc128@mail.gmail.com> 2006/9/14, raizyr : > I'm having the same problem, nvidia drivers in linux-restricted- > modules-2.6.15-26-686 and linux-image-2.6.15-26-686 don't have the same > version symbols > > -- > Binary Nvidia drivers not loaded after upgrade to linux-image-2.6.15-26-686 2.6.15-26.***47*** (USN-346-1) > https://launchpad.net/bugs/60433 Yeah, what I've done to solve this is: dpkg -i /var/cache/apt/linux-image-2.6.15-26-686_2.6.15-26.46_i386.deb and downgraded the kernel. -- Eduardo Alvarenga -- Binary Nvidia drivers not loaded after upgrade to linux-image-2.6.15-26-686 2.6.15-26.***47*** (USN-346-1) https://launchpad.net/bugs/60433 From ben.collins at ubuntu.com Thu Sep 14 17:53:03 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Thu, 14 Sep 2006 17:53:03 -0000 Subject: [Bug 60433] Re: Binary Nvidia drivers not loaded after upgrade to linux-image-2.6.15-26-686 2.6.15-26.***47*** (USN-346-1) References: <20060914165543.28823.31997.malonedeb@gangotri.ubuntu.com> Message-ID: <20060914175304.28762.94343.malone@gandwana.ubuntu.com> Here's the quick and dirty: The last security update included on symbol change, boot_cpu_data, that should have caused an ABI bump. After inspection, it seemed that this symbol affected no modules. However, I failed to check the nvidia module. The bad part is that the ABI check was disabled, since this one symbol only seems to affect i386 and amd64, and didn't seem to affect any modules. This was a mistake, and I am rectifying this by uploading a new linux- restricted-modules-2.6.15 rebuild against the new kernel. Long term resolution will be in the next security update which will bump the ABI properly. Regrets to anyone affected by this issue. Expect a new l-r-m package within 24 hours. ** Changed in: linux-meta (Ubuntu) Sourcepackagename: linux-meta => linux-source-2.6.15 Importance: Untriaged => High Assignee: (unassigned) => Ben Collins Status: Unconfirmed => Fix Committed -- Binary Nvidia drivers not loaded after upgrade to linux-image-2.6.15-26-686 2.6.15-26.***47*** (USN-346-1) https://launchpad.net/bugs/60433 From mikeskla at hotmail.com Thu Sep 14 18:39:25 2006 From: mikeskla at hotmail.com (mikes) Date: Thu, 14 Sep 2006 18:39:25 -0000 Subject: [Bug 52649] Re: VIA IRQ quirk changes in 2.6.15-26.44 have broken various VIA devices References: <20060711150321.27257.34756.malonedeb@gangotri.ubuntu.com> Message-ID: <20060914183925.28890.72505.malone@gangotri.ubuntu.com> I just updated to the latest kernel 2.6.15-26.47 that came out today (09-14-2006) and I am still having the same problems. Any changes in the 2.6.15-26-386 kernel did not change this problem on my PC. (See the second post). -- VIA IRQ quirk changes in 2.6.15-26.44 have broken various VIA devices https://launchpad.net/bugs/52649 From joachim.beckers at belgacom.net Thu Sep 14 18:43:10 2006 From: joachim.beckers at belgacom.net (Joachim Beckers) Date: Thu, 14 Sep 2006 18:43:10 -0000 Subject: [Bug 37163] Re: Ipods react badly to checks for EFI partition tables References: <20060329132453.6279.44854.malonedeb@gandwana.ubuntu.com> Message-ID: <20060914184310.28823.9076.malone@gangotri.ubuntu.com> linux-image 2.6.15-26.47 fixes this for me. others please check. one small note: it only works the first time I plug in my iPod, the second time it doesn't get recognised. but it has always been like that before :-) -- Ipods react badly to checks for EFI partition tables https://launchpad.net/bugs/37163 From erik.karlsson at bonetmail.com Thu Sep 14 19:19:51 2006 From: erik.karlsson at bonetmail.com (Erik Karlsson) Date: Thu, 14 Sep 2006 19:19:51 -0000 Subject: [Bug 60454] version 2.6.15-26.47 incompatible with nvidia dirver - X server fails to start References: <20060914191951.28890.65735.malonedeb@gangotri.ubuntu.com> Message-ID: <20060914191951.28890.65735.malonedeb@gangotri.ubuntu.com> *** This bug is a duplicate of bug 60433 *** Public bug reported: Binary package hint: linux-image-2.6.15-26-amd64-generic When upgrading from version 2.6.15-26.46 to 2.6.15-26.47 of linux- image-2.6.15-26-amd64-generic the X server failed to start. The reason was that the proprietatry nvidia driver nvidia.ko found in linux-restricted-modules-2.6.15-26-amd64-generic version 2.6.15.11-3 failed to load with the following error messgaes in the kernel log: -------- nvidia: disagrees about version of symbol boot_cpu_data nvidia: Unknown symbol boot_cpu_data nvidia: disagrees about version of symbol boot_cpu_data nvidia: Unknown symbol boot_cpu_data -------- ** Affects: linux-source-2.6.15 (Ubuntu) Importance: Untriaged Status: Unconfirmed ** Summary changed: - version 2.6.15-26.47 incompatible with nvidia dirver - X server fails to start + kernel version 2.6.15-26.47 incompatible with nvidia dirver - X server fails to start -- kernel version 2.6.15-26.47 incompatible with nvidia dirver - X server fails to start https://launchpad.net/bugs/60454 From kai.kasurinen at uninea.fi Thu Sep 14 19:28:13 2006 From: kai.kasurinen at uninea.fi (Kai Kasurinen) Date: Thu, 14 Sep 2006 19:28:13 -0000 Subject: [Bug 60454] Re: kernel version 2.6.15-26.47 incompatible with nvidia dirver - X server fails to start References: <20060914191951.28890.65735.malonedeb@gangotri.ubuntu.com> Message-ID: <20060914192813.28890.21991.launchpad@gangotri.ubuntu.com> *** This bug is a duplicate of bug 60433 *** ** This bug has been marked a duplicate of bug 60433 Binary Nvidia drivers not loaded after upgrade to linux-image-2.6.15-26-686 2.6.15-26.***47*** (USN-346-1) -- kernel version 2.6.15-26.47 incompatible with nvidia dirver - X server fails to start https://launchpad.net/bugs/60454 From kai.kasurinen at uninea.fi Thu Sep 14 19:28:13 2006 From: kai.kasurinen at uninea.fi (Kai Kasurinen) Date: Thu, 14 Sep 2006 19:28:13 -0000 Subject: [Bug 60433] Re: Binary Nvidia drivers not loaded after upgrade to linux-image-2.6.15-26-686 2.6.15-26.***47*** (USN-346-1) References: <20060914165543.28823.31997.malonedeb@gangotri.ubuntu.com> Message-ID: <20060914192813.28890.50059.launchpad@gangotri.ubuntu.com> ** Bug 60454 has been marked a duplicate of this bug -- Binary Nvidia drivers not loaded after upgrade to linux-image-2.6.15-26-686 2.6.15-26.***47*** (USN-346-1) https://launchpad.net/bugs/60433 From ben.collins at ubuntu.com Thu Sep 14 19:26:45 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Thu, 14 Sep 2006 19:26:45 -0000 Subject: [Bug 52649] Re: VIA IRQ quirk changes in 2.6.15-26.44 have broken various VIA devices References: <20060711150321.27257.34756.malonedeb@gangotri.ubuntu.com> Message-ID: <20060914192645.28890.62967.malone@gangotri.ubuntu.com> It's in the next upload. Which should happen in a few days. -- VIA IRQ quirk changes in 2.6.15-26.44 have broken various VIA devices https://launchpad.net/bugs/52649 From hugoveis at gmail.com Thu Sep 14 19:43:27 2006 From: hugoveis at gmail.com (hugue) Date: Thu, 14 Sep 2006 19:43:27 -0000 Subject: [Bug 60454] Re: kernel version 2.6.15-26.47 incompatible with nvidia dirver - X server fails to start References: <20060914191951.28890.65735.malonedeb@gangotri.ubuntu.com> Message-ID: <20060914194327.28823.76077.malone@gangotri.ubuntu.com> *** This bug is a duplicate of bug 60433 *** This morning when I installed the Kernel Upgrade for version 2.6.15-26.47-k7, I started having exactly the same problem. There is no way the Nvidia driver will load, and you end up with a blank screen. After doing a "dmesg" appears the same as above: -------- nvidia: disagrees about version of symbol boot_cpu_data nvidia: Unknown symbol boot_cpu_data nvidia: disagrees about version of symbol boot_cpu_data nvidia: Unknown symbol boot_cpu_data -------- I had to manually change the "/etc/X11/xorg.conf" file, in the section of the driver, from "nvidia" to "nv", to be able to start the X Server. When I saw this bug i guessed i'm not the only one with this problem, so maybe it's not my fault for a misconfiguration. -- kernel version 2.6.15-26.47 incompatible with nvidia dirver - X server fails to start https://launchpad.net/bugs/60454 From ben.collins at ubuntu.com Thu Sep 14 19:39:52 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Thu, 14 Sep 2006 19:39:52 -0000 Subject: [Bug 60271] Re: wired network does not work since 2.6.17-7 References: <20060913184419.17774.81485.malonedeb@gandwana.ubuntu.com> Message-ID: <20060914193952.28823.49475.launchpad@gangotri.ubuntu.com> ** Also affects: linux-source-2.6.15 (Ubuntu) Importance: Untriaged Status: Unconfirmed ** Changed in: linux-source-2.6.15 (Ubuntu) Importance: Untriaged => Medium Status: Unconfirmed => Needs Info ** Changed in: linux-source-2.6.17 (Ubuntu) Importance: Untriaged => Medium -- wired network does not work since 2.6.17-7 https://launchpad.net/bugs/60271 From stardust.one at gmail.com Thu Sep 14 19:45:39 2006 From: stardust.one at gmail.com (stardust.one) Date: Thu, 14 Sep 2006 19:45:39 -0000 Subject: [Bug 60459] some troubles with a network References: <20060914194539.28823.45292.malonedeb@gangotri.ubuntu.com> Message-ID: <20060914194539.28823.45292.malonedeb@gangotri.ubuntu.com> Public bug reported: Hi After update the kernel, I have some troubles with my connexion(network) ** Affects: linux-source-2.6.15 (Ubuntu) Importance: Untriaged Status: Unconfirmed -- some troubles with a network https://launchpad.net/bugs/60459 From ben.collins at ubuntu.com Thu Sep 14 19:48:46 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Thu, 14 Sep 2006 19:48:46 -0000 Subject: [Bug 60271] Re: wired network does not work since 2.6.17-7 References: <20060913184419.17774.81485.malonedeb@gandwana.ubuntu.com> Message-ID: <20060914194846.28941.57684.malone@gandwana.ubuntu.com> Run this as root: modprobe sk98lin echo 11ad:4363 > /sys/bus/pci/drivers/sk98lin/new_id That should force recognition of the device. The device ID will be added in the next upload. ** Changed in: linux-source-2.6.17 (Ubuntu) Status: Needs Info => In Progress ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Needs Info => Fix Committed -- wired network does not work since 2.6.17-7 https://launchpad.net/bugs/60271 From federico.sassi1 at studenti.unipr.it Thu Sep 14 19:56:58 2006 From: federico.sassi1 at studenti.unipr.it (Federico Sassi) Date: Thu, 14 Sep 2006 19:56:58 -0000 Subject: [Bug 25673] Re: Keyboard and touchpad doesn't work after suspend-to-ram on a Fujitsu-Siemens Amilo M1420 References: <20060113143457.21012.29014.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060914195659.28941.59458.malone@gandwana.ubuntu.com> Hi I've tried, like said in bug 22931, to rmmod button and psmouse but it's not working neither the touchpad neither the keyboard. I've noticed that acpi doesn't come up right so I did (thanks to copy&paste&dasher) a sudo /etc/init.d/acpid restart and a sudo /etc/init.d/acpi-support restart but it didn't changed anything! Would you like output from dmesg? Thanks for caring! Federico -- Keyboard and touchpad doesn't work after suspend-to-ram on a Fujitsu-Siemens Amilo M1420 https://launchpad.net/bugs/25673 From federico.sassi1 at studenti.unipr.it Thu Sep 14 20:24:06 2006 From: federico.sassi1 at studenti.unipr.it (Federico Sassi) Date: Thu, 14 Sep 2006 20:24:06 -0000 Subject: [Bug 25673] Re: Keyboard and touchpad doesn't work after suspend-to-ram on a Fujitsu-Siemens Amilo M1420 References: <20060113143457.21012.29014.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060914202406.28823.445.malone@gangotri.ubuntu.com> Hi, here there's dmesg output after waking up from suspend. as you can see there are a lot of **** SET: Misaligned resource pointer: d72881c2 Type 07 Len 0 and atkbd.c: Use 'setkeycodes 00 ' to make it known. atkbd.c: Unknown key pressed (translated set 2, code 0x0 on isa0060/serio0). and ACPI: read EC, IB not empty ACPI-0412: *** Error: Handler for [EmbeddedControl] returned AE_TIME ACPI-0517: *** Error: Method parse/execution failed [\_SB_.AC__._PSR] (Node c1599560), AE_TIME Maybe the error is here... thanks Federico ** Attachment added: "dmesg after suspending to ram" http://librarian.launchpad.net/4272361/dmesg_after_suspend.txt -- Keyboard and touchpad doesn't work after suspend-to-ram on a Fujitsu-Siemens Amilo M1420 https://launchpad.net/bugs/25673 From launchpad at news.mh.hampelnet.de Thu Sep 14 20:57:37 2006 From: launchpad at news.mh.hampelnet.de (Matthias Hampel) Date: Thu, 14 Sep 2006 20:57:37 -0000 Subject: [Bug 38865] Re: sky2 driver freezing system after ifdown and ifup References: <20060409125752.32313.97119.malonedeb@gandwana.ubuntu.com> Message-ID: <20060914205737.28890.1191.malone@gangotri.ubuntu.com> Ben, your sk98lin-kernel is working. But now I try out the "autonegotiation = off" setting... Let's see if it works. -- sky2 driver freezing system after ifdown and ifup https://launchpad.net/bugs/38865 From federico.sassi1 at studenti.unipr.it Thu Sep 14 21:24:43 2006 From: federico.sassi1 at studenti.unipr.it (Federico Sassi) Date: Thu, 14 Sep 2006 21:24:43 -0000 Subject: [Bug 25673] Re: Keyboard and touchpad doesn't work after suspend-to-ram on a Fujitsu-Siemens Amilo M1420 References: <20060113143457.21012.29014.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060914212443.28890.87363.malone@gangotri.ubuntu.com> Hi, sorry for another entry but I forgot to mention my test about booting with different parameter of i8042 as suggested by Kashif Sheikh in a precedent entry in this bug. I've tried booting with: i8042.noaux i8042.reset i8042.noacpi It didn't worked in every case but there are little differences in dmesg outputs NOACPI it's exacly like without that booting option, in dmesg there is the same "i8042: failed to resume active multiplexor, mouse won't work." NOAUX there is no line in dmesg after resume telling anything about i8042 and there is only one "atkbd.c: Unknown key pressed (translated set 2, code 0x0 on isa0060/serio0). atkbd.c: Use 'setkeycodes 00 ' to make it known." RESET there is a different statement: "i8042.c: i8042 controller selftest failed. (0x0 != 0x55)" Do you know any explanation about this? Bye Federico -- Keyboard and touchpad doesn't work after suspend-to-ram on a Fujitsu-Siemens Amilo M1420 https://launchpad.net/bugs/25673 From jmgimeno at gmail.com Thu Sep 14 21:46:27 2006 From: jmgimeno at gmail.com (babui) Date: Thu, 14 Sep 2006 21:46:27 -0000 Subject: [Bug 47561] Re: ACPI-battery monitoring stops working after some time References: <20060530194416.5009.28356.malonedeb@gandwana.ubuntu.com> Message-ID: <20060914214628.28762.83746.malone@gandwana.ubuntu.com> I have the same poblem with HP Compaq nx6310 (Intel Centrino Duo) both with kernel 2.6.15-26-386 (no SMP) and 2.6.15-26-686 (with SMP). Juan Manuel Gimeno -- ACPI-battery monitoring stops working after some time https://launchpad.net/bugs/47561 From mdz at ubuntu.com Thu Sep 14 22:34:53 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Thu, 14 Sep 2006 22:34:53 -0000 Subject: [Bug 60433] Re: Binary Nvidia drivers not loaded after upgrade to linux-image-2.6.15-26-686 2.6.15-26.***47*** (USN-346-1) References: <20060914165543.28823.31997.malonedeb@gangotri.ubuntu.com> Message-ID: <20060914223453.28762.34091.malone@gandwana.ubuntu.com> This issue is corrected in linux-restricted-modules-2.6.15 version 2.6.15.11-4 ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Fix Committed => Fix Released -- Binary Nvidia drivers not loaded after upgrade to linux-image-2.6.15-26-686 2.6.15-26.***47*** (USN-346-1) https://launchpad.net/bugs/60433 From jmr at det.ua.pt Fri Sep 15 00:09:36 2006 From: jmr at det.ua.pt (=?utf-8?q?Jo=C3=A3o_Manuel_Rodrigues?=) Date: Fri, 15 Sep 2006 00:09:36 -0000 Subject: [Bug 30557] Re: cpu idle time in /proc/stat wrong References: <20060205141542.11709.55517.malonedeb@gandwana.ubuntu.com> Message-ID: <20060915000936.28762.68634.malone@gandwana.ubuntu.com> This probably does not belong here, but just to let you know: With latest update of the 686 kernel (2.6.15-26.47), restricted modules (2.6.15.11-4) and proprietary ATI fglrx driver (7.0.0-8.25.18+2.6.15.11-4), I now have hardware 3D with the 686 kernel. Problem seems to be gone. -- cpu idle time in /proc/stat wrong https://launchpad.net/bugs/30557 From ben.collins at ubuntu.com Fri Sep 15 00:15:12 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Fri, 15 Sep 2006 00:15:12 -0000 Subject: [Bug 60271] Re: wired network does not work since 2.6.17-7 References: <20060913184419.17774.81485.malonedeb@gandwana.ubuntu.com> Message-ID: <20060915001512.28890.73006.malone@gangotri.ubuntu.com> Well, it seems that the sky2 driver had support for 2 devices that the sk98lin driver doesn't support, and can't without extra patching. I'm uploading a new kernel for dapper tomorrow that re-enables sky2 just for these devices. -- wired network does not work since 2.6.17-7 https://launchpad.net/bugs/60271 From ben.collins at ubuntu.com Fri Sep 15 00:25:02 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Fri, 15 Sep 2006 00:25:02 -0000 Subject: [Bug 60459] Re: some troubles with a network References: <20060914194539.28823.45292.malonedeb@gangotri.ubuntu.com> Message-ID: <20060915002502.28762.59028.launchpad@gandwana.ubuntu.com> *** This bug is a duplicate of bug 60271 *** ** This bug has been marked a duplicate of bug 60271 wired network does not work since 2.6.17-7 -- some troubles with a network https://launchpad.net/bugs/60459 From ben.collins at ubuntu.com Fri Sep 15 00:25:02 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Fri, 15 Sep 2006 00:25:02 -0000 Subject: [Bug 60271] Re: wired network does not work since 2.6.17-7 References: <20060913184419.17774.81485.malonedeb@gandwana.ubuntu.com> Message-ID: <20060915002502.28762.62813.launchpad@gandwana.ubuntu.com> ** Bug 60459 has been marked a duplicate of this bug -- wired network does not work since 2.6.17-7 https://launchpad.net/bugs/60271 From xanni at glasswings.com.au Fri Sep 15 04:34:36 2006 From: xanni at glasswings.com.au (Andrew Pam) Date: Fri, 15 Sep 2006 04:34:36 -0000 Subject: [Bug 60504] regression: Unknown symbol cpu_data References: <20060915043436.28941.554.malonedeb@gandwana.ubuntu.com> Message-ID: <20060915043436.28941.554.malonedeb@gandwana.ubuntu.com> Public bug reported: Binary package hint: linux-image-2.6.15-26-amd64-generic Sep 15 13:19:05 fraggle kernel: [ 81.977245] speedstep_centrino: Unknown symbol cpu_data Sep 15 13:19:05 fraggle kernel: [ 81.988746] acpi_cpufreq: Unknown symbol cpu_data Sep 15 13:19:05 fraggle kernel: [ 83.416114] nvidia: disagrees about version of symbol boot_cpu_data Sep 15 13:19:05 fraggle kernel: [ 83.416142] nvidia: Unknown symbol boot_cpu_data This forces the cpu cores to run at full speed at all times and disables the nvidia graphics drivers. The regression occured after installing today's 2.6.15-26.47 kernel image. ** Affects: linux-source-2.6.15 (Ubuntu) Importance: Untriaged Status: Unconfirmed -- regression: Unknown symbol cpu_data https://launchpad.net/bugs/60504 From fabbione at ubuntu.com Fri Sep 15 05:05:06 2006 From: fabbione at ubuntu.com (Fabio Massimo Di Nitto) Date: Fri, 15 Sep 2006 05:05:06 -0000 Subject: [Bug 53208] Re: [EDGY] Regression from 2.6.17-2 to 2.6.17-5 References: <20060717050555.2126.12285.malonedeb@gandwana.ubuntu.com> Message-ID: <20060915050506.28941.18329.malone@gandwana.ubuntu.com> *** This bug is a duplicate of bug 51369 *** I guess this has been fixed along with the UUID and other updates. I can't reproduce it anylonger. Fabio ** Changed in: linux-source-2.6.17 (Ubuntu) Status: Confirmed => Fix Released -- [EDGY] Regression from 2.6.17-2 to 2.6.17-5 https://launchpad.net/bugs/53208 From fabbione at ubuntu.com Fri Sep 15 05:32:29 2006 From: fabbione at ubuntu.com (Fabio Massimo Di Nitto) Date: Fri, 15 Sep 2006 05:32:29 -0000 Subject: [Bug 26859] Re: general: 2.6.12-10 regressions from 2.6.12-9 References: <20060113145140.21012.69410.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060915053230.28890.40665.malone@gangotri.ubuntu.com> No info have been provided on the test packages. This makes impossible for me to track down the issue. If somebody is willing to test, please reopen the bug and add the info requested. Fabio ** Changed in: linux-source-2.6.12 (Ubuntu) Status: Needs Info => Rejected -- general: 2.6.12-10 regressions from 2.6.12-9 https://launchpad.net/bugs/26859 From dev at ceglarek.org Fri Sep 15 07:22:05 2006 From: dev at ceglarek.org (Prinz Igor) Date: Fri, 15 Sep 2006 07:22:05 -0000 Subject: [Bug 60271] Re: wired network does not work since 2.6.17-7 References: <20060913184419.17774.81485.malonedeb@gandwana.ubuntu.com> Message-ID: <20060915072205.28823.10091.malone@gangotri.ubuntu.com> Do you still need the output of "lspci -vv" and "lspci -vvn"? Should I still test "modprobe ... echo ..."? Thank you for uploading a new Kernel. But can you please upload a new one for Edgy, too? Or tell the responsible guy to do so, please? -- wired network does not work since 2.6.17-7 https://launchpad.net/bugs/60271 From dsilvers at digital-scurf.org Fri Sep 15 07:48:09 2006 From: dsilvers at digital-scurf.org (Daniel Silverstone) Date: Fri, 15 Sep 2006 07:48:09 -0000 Subject: [Bug 31517] dbus does not start References: <20060215151746.15843.63562.malonedeb@gangotri.ubuntu.com> Message-ID: <20060915074809.28823.54156.launchpad@canonical@gangotri.ubuntu.com> Public bug reported: In dapper (current as of about 14:00 UTC 2006-02-15) the hal-device- manager will not load properly. If I attempt to load it from a terminal then I get something about a gtk.Menu and that's it. ** Affects: dbus (upstream) Importance: Unknown Status: Fix Released ** Affects: linux-source-2.6.15 (Ubuntu) Importance: Medium Status: Confirmed -- dbus does not start https://launchpad.net/bugs/31517 From martin.pitt at ubuntu.com Fri Sep 15 07:48:09 2006 From: martin.pitt at ubuntu.com (Martin Pitt) Date: Fri, 15 Sep 2006 07:48:09 -0000 Subject: [Bug 31517] Re: dbus does not start References: <20060215151746.15843.63562.malonedeb@gangotri.ubuntu.com> Message-ID: <20060915074809.28823.67687.malone@gangotri.ubuntu.com> Hugh, ok, so nothing unusual in your logs. This bug became horribly complicated since all sorts of different bugs got amalgated into this one, so let's clear up a bit. This thread begun with hal-device-manager not starting, which was fixes ages ago. The hang due to having samba shares is already known as bug 44874. Folks who have this problem, please have a look at that bug. If anyone still has the problem of a non-existing 'haldaemon' user (check that 'id haldaemon' prints an error), please file a new bug. It works well when upgrading breezy to dapper, or installing dapper from scratch here. So let's devote this bug to the kernel oops produced by starting dbus, as shown in https://launchpad.net/distros/ubuntu/+source/dbus/+bug/31517/comments/33Hugh, ok, so nothing unusual in your logs. This bug became horribly complicated since all sorts of different bugs got amalgated into this one, so let's clear up a bit. This thread begun with hal-device-manager not starting, which was fixes ages ago. The hang due to having samba shares is already known as bug 44874. Folks who have this problem, please have a look at that bug. If anyone still has the problem of a non-existing 'haldaemon' user (check that 'id haldaemon' prints an error), please file a new bug. It works well when upgrading breezy to dapper, or installing dapper from scratch here. So let's devote this bug to the kernel oops produced by starting dbus, as shown in http://librarian.launchpad.net/3851218/dbus.log Kernel gurus, can you make some head and tail of the oops trace? ** Changed in: dbus (Ubuntu) Sourcepackagename: dbus => linux-source-2.6.15 Assignee: Martin Pitt => (unassigned) ** Changed in: dbus (upstream) Importance: Unknown => Untriaged Bugwatch: Freedesktop Bugzilla #6059 => None Status: Fix Released => Unconfirmed ** Changed in: dbus (upstream) Status: Unconfirmed => Rejected ** Summary changed: - dbus does not start + starting hal causes kernel oops in sysfs_get_target_path() ** Description changed: - In dapper (current as of about 14:00 UTC 2006-02-15) the hal-device- - manager will not load properly. + Starting hal produces a kernel oops as shown in - If I attempt to load it from a terminal then I get something about a - gtk.Menu and that's it. + http://librarian.launchpad.net/3851218/dbus.log + + and hal fails to start. -- starting hal causes kernel oops in sysfs_get_target_path() https://launchpad.net/bugs/31517 From martin.pitt at ubuntu.com Fri Sep 15 07:51:56 2006 From: martin.pitt at ubuntu.com (Martin Pitt) Date: Fri, 15 Sep 2006 07:51:56 -0000 Subject: [Bug 31517] Re: starting hal causes kernel oops in sysfs_get_target_path() References: <20060215151746.15843.63562.malonedeb@gangotri.ubuntu.com> Message-ID: <20060915075156.28823.2178.malone@gangotri.ubuntu.com> Whoops, sorry for the copy&paste problem in the previous comment. -- starting hal causes kernel oops in sysfs_get_target_path() https://launchpad.net/bugs/31517 From avilella at gmail.com Fri Sep 15 08:19:02 2006 From: avilella at gmail.com (Albert Vilella) Date: Fri, 15 Sep 2006 08:19:02 -0000 Subject: [Bug 39307] Re: Sonypi motioneye camera not recognized References: <20060412145624.15436.52451.malonedeb@gangotri.ubuntu.com> Message-ID: <20060915081902.28823.55908.malone@gangotri.ubuntu.com> Laurent Pinchard, of uvclinux fame, helped on investigate this device (see http://avilella.googlepages.com/camera_notes). It seems this is not a UVC compliant "U" device, but a "W" instead. Hence, Ricoh is using the "Ricoh Original Driver", which means that we should contact Ricoh about the Linux support. We could probably close this bug or rename it as "Ask Ricoh to disclose information regarding this device's drivers". -- Sonypi motioneye camera not recognized https://launchpad.net/bugs/39307 From xanni at glasswings.com.au Fri Sep 15 08:25:26 2006 From: xanni at glasswings.com.au (Andrew Pam) Date: Fri, 15 Sep 2006 08:25:26 -0000 Subject: [Bug 17589] Re: System clock runs far too fast References: <20060113135219.21012.1755.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060915082526.28823.98523.malone@gangotri.ubuntu.com> I have the same problem running Dapper Drake on an Intel Core 2 Duo desktop (Asus P5WDG2 WS Pro motherboard) with Nvidia graphics on the latest 2.6.15-26-amd64-xeon kernel package 2.6.15-26.47 -- System clock runs far too fast https://launchpad.net/bugs/17589 From xeros at irc.pl Fri Sep 15 08:26:53 2006 From: xeros at irc.pl (Tomasz Czapiewski) Date: Fri, 15 Sep 2006 08:26:53 -0000 Subject: [Bug 32968] Re: no support for VIA PT880ULTRA on amd64/xeon References: <20060226190725.16638.35762.malonedeb@gandwana.ubuntu.com> Message-ID: <20060915082654.28890.74995.malone@gangotri.ubuntu.com> I've got the same problem with AGPGART on my PT880Ultra chipset Asus P4V800D-X mainboard. It needs a small fix in via-agp.c It's fixed in 2.6.17 kernel: commit 7dd1d9b85cfb63eebf48fa13d3c5d25a3deb3a25 Author: Magnus Kessler Date: Mon May 22 10:53:10 2006 +0100 [AGPGART] VIA PT880 Ultra support. This patch enables agpgart on a Via "PT880 Ultra" based motherboard (Asus P4V800D-X). The PCI ID of the PT880 Ultra is 0x0308 instead of 0x0258 of the PT880. The patched via-agp passes testgart. Signed-off-by: Magnus Kessler Signed-off-by: Dave Jones Could you include this fix in Dapper Drake 2.6.15 kernel? -- no support for VIA PT880ULTRA on amd64/xeon https://launchpad.net/bugs/32968 From xeros at irc.pl Fri Sep 15 08:34:51 2006 From: xeros at irc.pl (Tomasz Czapiewski) Date: Fri, 15 Sep 2006 08:34:51 -0000 Subject: [Bug 32968] Re: no support for VIA PT880ULTRA on amd64/xeon (and i386) References: <20060226190725.16638.35762.malonedeb@gandwana.ubuntu.com> Message-ID: <20060915083451.28762.4813.malone@gandwana.ubuntu.com> I forgot to mention that I have this problem in 32-bit architecture - P4 with HyperThreading enabled. My system is Kubuntu Dapper Drake 6.06 (with all updates) - (2.6.15-26.46 and 2.6.15-26.47). All previous kernels had this problem, too. -- no support for VIA PT880ULTRA on amd64/xeon https://launchpad.net/bugs/32968 From kraptor at kraptor.com Fri Sep 15 08:37:08 2006 From: kraptor at kraptor.com (Kraptor) Date: Fri, 15 Sep 2006 08:37:08 -0000 Subject: [Bug 60532] Broadcom BCM4401 100Base-T driver module freezes ethernet connection, then reinitializes the device References: <20060915083708.28762.50588.malonedeb@gandwana.ubuntu.com> Message-ID: <20060915083708.28762.50588.malonedeb@gandwana.ubuntu.com> Public bug reported: Binary package hint: linux-image-2.6.15-26-k7 Current driver being used: Driver: b44.c:v0.97 (Nov 30, 2005) shipped with Ubuntu Dapper Drake. Using the Broadcom in-kernel shipped driver, the ethernet device reinitializes itself when operates at a sostained high transfer rate. At about 200-300KB max speed is reached without errors/reinitiazations, but a 100Mbit ethernet device can go up to 8MB transfer rates approximately. I do not know why this happens. Two years ago, a similar problem was happening with something called Watchdog: NETDEV WATCHDOG: eth0: transmit timed out eth0: Link is down. eth0: Link is up at 100 Mbps, full duplex. eth0: Flow control is off for TX and off for RX. I've tried the latest available driver from the Broadcom webpage, and still happens. This has started with recent drivers. 6 months before, this was not happening. I noticed this recently, I was thinking the errors where from the University switches where I work, but I've isolated the error to the Broadcom driver. MORE INFO: Kernel Info: ======================================================================= kraptor at krmobile:~$ uname -a Linux krmobile 2.6.15-26-k7 #1 SMP PREEMPT Fri Sep 8 20:38:34 UTC 2006 i686 GNU/Linux Loaded modules info ======================================================================= kraptor at krmobile:~$ sudo lsmod Module Size Used by vmnet 40740 13 vmmon 117708 0 binfmt_misc 13192 1 rfcomm 44244 0 l2cap 29184 5 rfcomm bluetooth 54372 4 rfcomm,l2cap ppdev 10052 0 radeon 119200 2 drm 78292 3 radeon cpufreq_stats 6912 0 tc1100_wmi 7172 0 video 16644 0 acpi_sbs 20556 0 battery 10308 1 acpi_sbs i2c_acpi_ec 5440 1 acpi_sbs container 4928 0 button 6992 0 pcc_acpi 12736 0 sony_acpi 5900 0 ac 5508 1 acpi_sbs dev_acpi 11652 0 hotkey 11812 0 ext3 148424 1 jbd 65684 1 ext3 dm_mod 63640 1 md_mod 76244 0 cpufreq_userspace 6816 1 cpufreq_powersave 2240 0 cpufreq_ondemand 8104 0 cpufreq_conservative 9256 0 powernow_k7 9192 0 freq_table 5152 2 cpufreq_stats,powernow_k7 sr_mod 18276 0 sbp2 25540 0 scsi_mod 145736 2 sr_mod,sbp2 lp 12612 0 af_packet 25224 4 snd_ali5451 27084 3 snd_ac97_codec 99296 1 snd_ali5451 snd_ac97_bus 2688 1 snd_ac97_codec joydev 10688 0 parport_pc 38340 1 parport 39560 3 ppdev,lp,parport_pc snd_pcm_oss 56352 0 snd_mixer_oss 20800 1 snd_pcm_oss snd_pcm 96772 5 snd_ali5451,snd_ac97_codec,snd_pcm_oss snd_timer 27204 1 snd_pcm snd 60068 10 snd_ali5451,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer pcmcia 42108 0 psmouse 40132 0 serio_raw 8132 0 b44 28108 0 ipw2200 113836 0 i2c_ali1535 7812 0 i2c_ali15x3 8388 0 i2c_core 23168 3 i2c_acpi_ec,i2c_ali1535,i2c_ali15x3 mii 6528 1 b44 soundcore 11040 1 snd snd_page_alloc 11592 1 snd_pcm pcspkr 2564 0 ieee80211 40072 1 ipw2200 ieee80211_crypt 6848 1 ieee80211 ieee80211_1_1_13 41096 0 ieee80211_1_1_13_crypt 7360 1 ieee80211_1_1_13 yenta_socket 30092 1 rsrc_nonstatic 14784 1 yenta_socket pcmcia_core 45528 3 pcmcia,yenta_socket,rsrc_nonstatic ati_agp 9932 1 agpgart 37072 2 drm,ati_agp shpchp 49312 0 pci_hotplug 30916 1 shpchp tsdev 8320 0 evdev 10432 2 usbhid 42912 0 reiserfs 284400 1 ide_generic 1792 0 ehci_hcd 36104 0 ohci_hcd 22788 0 usbcore 139012 4 usbhid,ehci_hcd,ohci_hcd ohci1394 37684 0 ieee1394 307160 2 sbp2,ohci1394 ide_cd 36228 0 cdrom 41504 2 sr_mod,ide_cd ide_disk 19520 4 alim15x3 13196 0 [permanent] generic 5444 0 thermal 14088 0 processor 27208 2 powernow_k7,thermal fan 5124 0 capability 5256 0 commoncap 7616 1 capability vga16fb 14344 1 vgastate 10304 1 vga16fb fbcon 44640 72 tileblit 3072 1 fbcon font 8640 1 fbcon bitblit 6592 1 fbcon softcursor 2752 1 bitblit PCI Data info ======================================================================= kraptor at krmobile:~$ sudo lspci -vvv 0000:00:00.0 Host bridge: ATI Technologies Inc AGP Bridge [IGP 320M] (rev 13) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- Reset- FastB2B- 0000:00:07.0 ISA bridge: ALi Corporation M1533 PCI to ISA Bridge [Aladdin IV] Subsystem: ALi Corporation ALI M1533 Aladdin IV ISA Bridge Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR+ TAbort- SERR- TAbort- SERR- Reset+ 16bInt+ PostWrite+ 16-bit legacy interface ports at 0001 0000:00:0a.1 FireWire (IEEE 1394): Texas Instruments PCI4410 FireWire Controller (rev 02) (prog-if 10 [OHCI]) Subsystem: Rioworks: Unknown device 2029 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort+ SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- Message-ID: <20060915084903.28762.9075.malone@gandwana.ubuntu.com> Using the "notsc" kernel parameter seems to fix the problem. -- System clock runs far too fast https://launchpad.net/bugs/17589 From bluszcz at jabberpl.org Fri Sep 15 08:53:53 2006 From: bluszcz at jabberpl.org (Rafal Zawadzki) Date: Fri, 15 Sep 2006 08:53:53 -0000 Subject: [Bug 32968] Re: no support for VIA PT880ULTRA on amd64/xeon References: <20060226190725.16638.35762.malonedeb@gandwana.ubuntu.com> Message-ID: <20060915085353.28941.48000.malone@gandwana.ubuntu.com> I decided to buy pci expressz card - everything works fine, including 64 architecture. Agpgart is completely broken on linux and cause many problems. -- no support for VIA PT880ULTRA on amd64/xeon https://launchpad.net/bugs/32968 From pc741tw at gmail.com Fri Sep 15 09:01:21 2006 From: pc741tw at gmail.com (MENG HSING.TUNG) Date: Fri, 15 Sep 2006 09:01:21 -0000 Subject: [Bug 57502] Re: JMicron PATA/SATA Controller does not work References: <20060823192235.13463.13121.malonedeb@gandwana.ubuntu.com> Message-ID: <20060915090121.28941.28569.malone@gandwana.ubuntu.com> I also confirm this bug. I want to use Ubuntu. -- JMicron PATA/SATA Controller does not work https://launchpad.net/bugs/57502 From stardust.one at gmail.com Fri Sep 15 09:18:22 2006 From: stardust.one at gmail.com (stardust.one) Date: Fri, 15 Sep 2006 09:18:22 -0000 Subject: [Bug 60271] Re: wired network does not work since 2.6.17-7 References: <20060913184419.17774.81485.malonedeb@gandwana.ubuntu.com> Message-ID: <20060915091822.28762.33018.malone@gandwana.ubuntu.com> Hi 0000:02:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8036 Fast Ethernet Controller (rev 10) 0000:06:04.0 Network controller: Intel Corporation PRO/Wireless 2200BG (rev 05) before update(last night), I had no soucy with my connection but after update, I have just my wifi card is work with networkmanager p.s: sorry for my english :-) Bonjour Comme mon anglais est approximatif, je me permets d'écrire mon message en français: Avant la mise à jour du noyau, mes connexions internet marchaient très bien avec networkmanager mais depuis la mise à jour d'hier, seule la connexion wifi marche -- wired network does not work since 2.6.17-7 https://launchpad.net/bugs/60271 From bj at aufderwacht.com Fri Sep 15 09:26:41 2006 From: bj at aufderwacht.com (BuJac) Date: Fri, 15 Sep 2006 09:26:41 -0000 Subject: [Bug 57502] Re: JMicron PATA/SATA Controller does not work References: <20060823192235.13463.13121.malonedeb@gandwana.ubuntu.com> Message-ID: <20060915092642.28762.58086.malone@gandwana.ubuntu.com> same: P5VD2-MX, CORE 2 DUO, E6400, SB: VIA VT8237A, JMB363 all-generic-ide in grub.conf (kernel-line) works fine with 2.6.18-RC8 no solution for xen-3.0 unstable !? someone? -- JMicron PATA/SATA Controller does not work https://launchpad.net/bugs/57502 From stardust.one at gmail.com Fri Sep 15 09:32:24 2006 From: stardust.one at gmail.com (stardust.one) Date: Fri, 15 Sep 2006 09:32:24 -0000 Subject: [Bug 60271] Re: wired network does not work since 2.6.17-7 References: <20060913184419.17774.81485.malonedeb@gandwana.ubuntu.com> Message-ID: <20060915093224.28762.53765.malone@gandwana.ubuntu.com> hi sorry, my kernel is not 2.6.17.7 but it's a 2.6.15-26-386 -- wired network does not work since 2.6.17-7 https://launchpad.net/bugs/60271 From dennis.schwan at leuchtturm-it.de Fri Sep 15 11:24:35 2006 From: dennis.schwan at leuchtturm-it.de (marduk) Date: Fri, 15 Sep 2006 11:24:35 -0000 Subject: [Bug 40561] Problem with USB Mass Storage References: <20060421135712.30538.73448.malonedeb@gangotri.ubuntu.com> Message-ID: <20060915112435.28823.22124.launchpad@canonical@gangotri.ubuntu.com> Public bug reported: I have this problem with 2 PC's running Dapper Drake Beta (Last Upgrade today). The USB-Device gets connected and is also mounted automatically. But syslog already writes down some errors: [4295161.475000] cdc_acm 2-2:1.1: ttyACM0: USB ACM device [4295161.478000] cdc_acm 2-2:1.3: ttyACM1: USB ACM device [4295161.480000] usbcore: registered new driver cdc_acm [4295161.480000] drivers/usb/class/cdc-acm.c: v0.23:USB Abstract Control Model driver for USB modems and ISDN adapters [4295174.463000] usb 2-2: USB disconnect, address 2 [4295177.919000] usb 2-2: new full speed USB device using uhci_hcd and address 3 [4295178.210000] SCSI subsystem initialized [4295178.223000] Initializing USB Mass Storage driver... [4295178.223000] scsi0 : SCSI emulation for USB Mass Storage devices [4295178.224000] usb-storage: device found at 3 [4295178.224000] usb-storage: waiting for device to settle before scanning [4295178.224000] scsi1 : SCSI emulation for USB Mass Storage devices [4295178.224000] usb-storage: device found at 3 [4295178.224000] usb-storage: waiting for device to settle before scanning [4295178.225000] usbcore: registered new driver usb-storage [4295178.225000] USB Mass Storage support registered. [4295183.228000] Vendor: SEMC Model: Int.Memory Rev: 0000 [4295183.228000] Type: Direct-Access ANSI SCSI revision: 00 [4295183.228000] Vendor: SEMC Model: Mem-Stick Rev: 0000 [4295183.228000] Type: Direct-Access ANSI SCSI revision: 00 [4295183.233000] usb-storage: device scan complete [4295183.233000] usb-storage: device scan complete [4295183.333000] SCSI device sda: 53996 512-byte hdwr sectors (28 MB) [4295183.339000] sda: Write Protect is off [4295183.339000] sda: Mode Sense: 00 6a 00 00 [4295183.339000] sda: assuming drive cache: write through [4295183.352000] SCSI device sda: 53996 512-byte hdwr sectors (28 MB) [4295183.357000] sda: Write Protect is off [4295183.357000] sda: Mode Sense: 00 6a 00 00 [4295183.357000] sda: assuming drive cache: write through [4295183.357000] sda: sda1 [4295183.371000] sd 0:0:0:0: Attached scsi removable disk sda [4295183.381000] SCSI device sdb: 960481 512-byte hdwr sectors (492 MB) [4295183.386000] sdb: Write Protect is off [4295183.386000] sdb: Mode Sense: 00 6a 00 00 [4295183.386000] sdb: assuming drive cache: write through [4295183.399000] SCSI device sdb: 960481 512-byte hdwr sectors (492 MB) [4295183.405000] sdb: Write Protect is off [4295183.405000] sdb: Mode Sense: 00 6a 00 00 [4295183.405000] sdb: assuming drive cache: write through [4295183.405000] sdb: sdb1 [4295183.426000] sd 1:0:0:0: Attached scsi removable disk sdb [4295183.459000] sd 0:0:0:0: Attached scsi generic sg0 type 0 [4295183.459000] sd 1:0:0:0: Attached scsi generic sg1 type 0 [4295183.727000] Buffer I/O error on device sdb1, logical block 960472 [4295183.727000] Buffer I/O error on device sdb1, logical block 960473 [4295183.727000] Buffer I/O error on device sdb1, logical block 960474 [4295183.727000] Buffer I/O error on device sdb1, logical block 960475 [4295183.727000] Buffer I/O error on device sdb1, logical block 960476 [4295183.728000] Buffer I/O error on device sdb1, logical block 960477 [4295183.728000] Buffer I/O error on device sdb1, logical block 960478 [4295183.728000] Buffer I/O error on device sdb1, logical block 960479 [4295183.728000] Buffer I/O error on device sdb1, logical block 960472 [4295183.728000] Buffer I/O error on device sdb1, logical block 960473 [4295185.052000] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! [4295185.462000] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! Then i write some files on the Device. Sometimes the copy job "hangs" for a few seconds. [4295245.559000] sd 1:0:0:0: SCSI error: return code = 0x70000 [4295245.559000] end_request: I/O error, dev sdb, sector 241504 [4295245.559000] printk: 94 messages suppressed. [4295245.559000] Buffer I/O error on device sdb1, logical block 241473 [4295245.559000] lost page write due to I/O error on sdb1 [4295245.569000] sd 1:0:0:0: SCSI error: return code = 0x70000 [4295245.569000] end_request: I/O error, dev sdb, sector 241505 [4295245.569000] Buffer I/O error on device sdb1, logical block 241474 [4295245.569000] lost page write due to I/O error on sdb1 [4295245.580000] sd 1:0:0:0: SCSI error: return code = 0x70000 [4295245.580000] end_request: I/O error, dev sdb, sector 241506 [4295245.580000] Buffer I/O error on device sdb1, logical block 241475 [4295245.580000] lost page write due to I/O error on sdb1 [4295245.590000] sd 1:0:0:0: SCSI error: return code = 0x70000 [4295245.590000] end_request: I/O error, dev sdb, sector 241507 [4295245.590000] Buffer I/O error on device sdb1, logical block 241476 [4295245.590000] lost page write due to I/O error on sdb1 [4295245.600000] sd 1:0:0:0: SCSI error: return code = 0x70000 [4295245.600000] end_request: I/O error, dev sdb, sector 241508 [4295245.600000] Buffer I/O error on device sdb1, logical block 241477 [4295245.600000] lost page write due to I/O error on sdb1 [4295245.610000] sd 1:0:0:0: SCSI error: return code = 0x70000 [4295245.610000] end_request: I/O error, dev sdb, sector 241509 [4295245.610000] Buffer I/O error on device sdb1, logical block 241478 [4295245.610000] lost page write due to I/O error on sdb1 [4295245.620000] sd 1:0:0:0: SCSI error: return code = 0x70000 [4295245.620000] end_request: I/O error, dev sdb, sector 241510 [4295245.620000] Buffer I/O error on device sdb1, logical block 241479 [4295245.620000] lost page write due to I/O error on sdb1 [4295245.629000] sd 1:0:0:0: SCSI error: return code = 0x70000 [4295245.629000] end_request: I/O error, dev sdb, sector 241511 [4295245.629000] Buffer I/O error on device sdb1, logical block 241480 [4295245.629000] lost page write due to I/O error on sdb1 [4295245.639000] sd 1:0:0:0: SCSI error: return code = 0x70000 [4295245.639000] end_request: I/O error, dev sdb, sector 241512 [4295245.639000] Buffer I/O error on device sdb1, logical block 241481 [4295245.639000] lost page write due to I/O error on sdb1 [4295245.649000] sd 1:0:0:0: SCSI error: return code = 0x70000 [4295245.649000] end_request: I/O error, dev sdb, sector 241513 [4295245.649000] Buffer I/O error on device sdb1, logical block 241482 [4295245.649000] lost page write due to I/O error on sdb1 [4295245.659000] sd 1:0:0:0: SCSI error: return code = 0x70000 [4295245.659000] end_request: I/O error, dev sdb, sector 241514 [4295245.669000] sd 1:0:0:0: SCSI error: return code = 0x70000 [4295245.669000] end_request: I/O error, dev sdb, sector 241515 [4295245.679000] sd 1:0:0:0: SCSI error: return code = 0x70000 [4295245.679000] end_request: I/O error, dev sdb, sector 241516 [4295245.689000] sd 1:0:0:0: SCSI error: return code = 0x70000 [4295245.689000] end_request: I/O error, dev sdb, sector 241517 [4295245.699000] sd 1:0:0:0: SCSI error: return code = 0x70000 [4295245.699000] end_request: I/O error, dev sdb, sector 241518 [4295245.709000] sd 1:0:0:0: SCSI error: return code = 0x70000 [4295245.709000] end_request: I/O error, dev sdb, sector 241519 [4295245.713000] usb 2-2: USB disconnect, address 3 [4295245.713000] sd 1:0:0:0: SCSI error: return code = 0x10000 [4295245.713000] end_request: I/O error, dev sdb, sector 241520 Then i want to eject the device but it doesn umount (manually umount also doesnt work). When i remove the cable from the PC i get this in my syslog: [4295245.713000] sd 1:0:0:0: rejecting I/O to device being removed [4295245.713000] sd 1:0:0:0: rejecting I/O to device being removed [4295245.713000] sd 1:0:0:0: rejecting I/O to device being removed [4295245.713000] sd 1:0:0:0: rejecting I/O to device being removed [4295245.713000] sd 1:0:0:0: rejecting I/O to device being removed [4295245.713000] sd 1:0:0:0: rejecting I/O to device being removed [4295245.713000] sd 1:0:0:0: rejecting I/O to device being removed [4295245.713000] sd 1:0:0:0: rejecting I/O to device being removed [4295245.713000] sd 1:0:0:0: rejecting I/O to device being removed [4295245.713000] sd 1:0:0:0: rejecting I/O to device being removed [4295245.713000] sd 1:0:0:0: rejecting I/O to device being removed [4295245.713000] sd 1:0:0:0: rejecting I/O to device being removed [4295245.713000] sd 1:0:0:0: rejecting I/O to device being removed [4295245.713000] sd 1:0:0:0: rejecting I/O to device being removed [4295245.713000] sd 1:0:0:0: rejecting I/O to device being removed [4295245.713000] sd 1:0:0:0: rejecting I/O to device being removed [4295245.713000] sd 1:0:0:0: rejecting I/O to device being removed [4295245.713000] sd 1:0:0:0: rejecting I/O to device being removed The files that i have transferred to the device are corrupted (0 bytes). I can write to it with Windows XP / Vista without any problems, tried with Knoppix and had the same. The USB-Device is brand new (arrived today). lsusb -v: Bus 002 Device 007: ID 0fce:e042 Sony Ericsson Mobile Communications AB Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x0fce Sony Ericsson Mobile Communications AB idProduct 0xe042 bcdDevice 0.00 iManufacturer 1 Sony Ericsson iProduct 2 Sony Ericsson W810 iSerial 3 359061003023867_0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 55 bNumInterfaces 2 bConfigurationValue 1 iConfiguration 0 bmAttributes 0x80 (Bus Powered) MaxPower 500mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 8 Mass Storage bInterfaceSubClass 2 SFF-8020i, MMC-2 (ATAPI) bInterfaceProtocol 80 iInterface 4 memory 1 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x07 EP 7 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x87 EP 7 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 8 Mass Storage bInterfaceSubClass 2 SFF-8020i, MMC-2 (ATAPI) bInterfaceProtocol 80 iInterface 5 Sony Ericsson USB WMC Modem Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x08 EP 8 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x88 EP 8 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Device Status: 0x0000 (Bus Powered) ** Affects: linux-source-2.6.15 (Ubuntu) Importance: Medium Status: Confirmed -- Problem with USB Mass Storage https://launchpad.net/bugs/40561 From joachim.beckers at belgacom.net Fri Sep 15 11:22:02 2006 From: joachim.beckers at belgacom.net (Joachim Beckers) Date: Fri, 15 Sep 2006 11:22:02 -0000 Subject: [Bug 40561] Re: Problem with USB Mass Storage References: <20060421135712.30538.73448.malonedeb@gangotri.ubuntu.com> Message-ID: <20060915112202.28762.46030.malone@gandwana.ubuntu.com> I have this problem too, with my 4th gen 40GB ipod though. It usually works for some time while copying data, dut then suddenly it seems to give up. That's when the "Buffer I/O error on device sda2, logical block blabla" errors begin. Also, /dev/sd* disappear, which causes umount to not function at all. Google told me to rmmod ehci_hcd, but that makes the kernel crash. A hard reset is needed. ** Changed in: Ubuntu Status: Unconfirmed => Confirmed ** Changed in: Ubuntu Sourcepackagename: None => linux-source-2.6.15 -- Problem with USB Mass Storage https://launchpad.net/bugs/40561 From l.bigonville at edpnet.be Fri Sep 15 13:01:22 2006 From: l.bigonville at edpnet.be (Laurent Bigonville) Date: Fri, 15 Sep 2006 13:01:22 -0000 Subject: [Bug 24828] Re: IPv6 should be disabled by default References: <20060113143101.21012.62702.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060915130122.28762.61054.launchpad@gandwana.ubuntu.com> ** Tags added: ipv6 -- IPv6 should be disabled by default https://launchpad.net/bugs/24828 From ben.collins at ubuntu.com Fri Sep 15 16:05:52 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Fri, 15 Sep 2006 16:05:52 -0000 Subject: [Bug 60504] Re: regression: Unknown symbol cpu_data References: <20060915043436.28941.554.malonedeb@gandwana.ubuntu.com> Message-ID: <20060915160552.28890.45448.launchpad@gangotri.ubuntu.com> ** Changed in: linux-source-2.6.15 (Ubuntu) Assignee: (unassigned) => Ben Collins Status: Unconfirmed => Fix Released -- regression: Unknown symbol cpu_data https://launchpad.net/bugs/60504 From ben.collins at ubuntu.com Fri Sep 15 16:08:46 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Fri, 15 Sep 2006 16:08:46 -0000 Subject: [Bug 60271] Re: sk98lin driver misses some PCI id's supported by removed sky2 References: <20060913184419.17774.81485.malonedeb@gandwana.ubuntu.com> Message-ID: <20060915160846.28762.33694.malone@gandwana.ubuntu.com> It will be fixed in dapper and edgy before the weekend is up. ** Summary changed: - wired network does not work since 2.6.17-7 + sk98lin driver misses some PCI id's supported by removed sky2 ** Changed in: linux-source-2.6.17 (Ubuntu) Assignee: (unassigned) => Ben Collins Status: In Progress => Fix Committed ** Changed in: linux-source-2.6.15 (Ubuntu) Assignee: (unassigned) => Ben Collins -- sk98lin driver misses some PCI id's supported by removed sky2 https://launchpad.net/bugs/60271 From ben.collins at ubuntu.com Fri Sep 15 16:14:31 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Fri, 15 Sep 2006 16:14:31 -0000 Subject: [Bug 40561] Re: Problem with USB Mass Storage References: <20060421135712.30538.73448.malonedeb@gangotri.ubuntu.com> Message-ID: <20060915161431.28941.38888.malone@gandwana.ubuntu.com> Did you rmmod it before or after the disk failed? Please try doing it from a clean boot before even plugging in the ipod. -- Problem with USB Mass Storage https://launchpad.net/bugs/40561 From ben.collins at ubuntu.com Fri Sep 15 16:17:18 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Fri, 15 Sep 2006 16:17:18 -0000 Subject: [Bug 31517] Re: starting hal causes kernel oops in sysfs_get_target_path() References: <20060215151746.15843.63562.malonedeb@gangotri.ubuntu.com> Message-ID: <20060915161718.28762.47012.malone@gandwana.ubuntu.com> Is it possible to find out which file in sysfs it is accessing when this occurs? -- starting hal causes kernel oops in sysfs_get_target_path() https://launchpad.net/bugs/31517 From mark.nurse at gmail.com Fri Sep 15 16:45:43 2006 From: mark.nurse at gmail.com (Mark F) Date: Fri, 15 Sep 2006 16:45:43 -0000 Subject: [Bug 60563] freezes on startup, worked before update on 14/09/2006 References: <20060915130815.28941.90440.malonedeb@gandwana.ubuntu.com> Message-ID: <20060915164543.28762.60522.launchpad@canonical@gandwana.ubuntu.com> Public bug reported: Binary package hint: rhythmbox Dapper 6.06. AMD 2400, Winfast motherboard, rhythmbox library is connected to Samba server over ethernet. It worked fine before updating 14/09/2006 ** Affects: linux-source-2.6.15 (Ubuntu) Importance: Untriaged Status: Needs Info -- freezes on startup, worked before update on 14/09/2006 https://launchpad.net/bugs/60563 From ben.collins at ubuntu.com Fri Sep 15 16:45:43 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Fri, 15 Sep 2006 16:45:43 -0000 Subject: [Bug 60563] Re: freezes on startup, worked before update on 14/09/2006 References: <20060915130815.28941.90440.malonedeb@gandwana.ubuntu.com> Message-ID: <20060915164543.28762.60514.malone@gandwana.ubuntu.com> Please attach the output of: lspci -vv lspci -vvn Also, does the entire system freeze, or just rythmbox? If just rythmbox, please provide dmesg output after the freeze occurs. ** Changed in: rhythmbox (Ubuntu) Sourcepackagename: rhythmbox => linux-source-2.6.15 Assignee: Ubuntu Desktop Bugs => (unassigned) -- freezes on startup, worked before update on 14/09/2006 https://launchpad.net/bugs/60563 From joachim.beckers at belgacom.net Fri Sep 15 17:08:12 2006 From: joachim.beckers at belgacom.net (Joachim Beckers) Date: Fri, 15 Sep 2006 17:08:12 -0000 Subject: [Bug 40561] Re: Problem with USB Mass Storage References: <20060421135712.30538.73448.malonedeb@gangotri.ubuntu.com> Message-ID: <20060915170812.28890.74388.malone@gangotri.ubuntu.com> I tried both. steps to reproduce: 1) before it failed: boot up, log in to gnome, rmmod ehci_hcd, plug in the ipod, system seems to work fine but freezes when I try to access the ipod (actually, it was enough to open nautilus with computer:/// as the location) 2) after it failed: boot up, log into gnome, plug in the ipod, access it (this works fine for some time), see it fail (after a certain amount of read/write operations), system still works fine now, rmmod ehci_hcd, system freezes immediately. ** Attachment added: "excerpt from /var/log/messages (scenario 1)" http://librarian.launchpad.net/4273471/rmmod%20before%20failure -- Problem with USB Mass Storage https://launchpad.net/bugs/40561 From dev at ceglarek.org Fri Sep 15 18:16:08 2006 From: dev at ceglarek.org (Prinz Igor) Date: Fri, 15 Sep 2006 18:16:08 -0000 Subject: [Bug 60271] Re: sk98lin driver misses some PCI id's supported by removed sky2 References: <20060913184419.17774.81485.malonedeb@gandwana.ubuntu.com> Message-ID: <20060915181608.28890.55437.malone@gangotri.ubuntu.com> @Ben: Thank you very much!!! -- sk98lin driver misses some PCI id's supported by removed sky2 https://launchpad.net/bugs/60271 From ubuntu-launchpad at theplayboymansion.net Fri Sep 15 19:13:58 2006 From: ubuntu-launchpad at theplayboymansion.net (ph8) Date: Fri, 15 Sep 2006 19:13:58 -0000 Subject: [Bug 57502] Re: JMicron PATA/SATA Controller does not work References: <20060823192235.13463.13121.malonedeb@gandwana.ubuntu.com> Message-ID: <20060915191358.28941.33347.malone@gandwana.ubuntu.com> This is NOT fixed in Edgy Knot 3, there also seems to be some sort of halt on the release of daily builds from before when Chuck submitted his fix - what a pain! I'm hoping daily builds resume soon and I can get a daily install CD which hopefully will have chuck's patch! -- JMicron PATA/SATA Controller does not work https://launchpad.net/bugs/57502 From pele2 at email.nu Fri Sep 15 21:40:53 2006 From: pele2 at email.nu (pelle.k) Date: Fri, 15 Sep 2006 21:40:53 -0000 Subject: [Bug 60630] ndiswrapper-common cant find ndiswrapper-1.1 etc... References: <20060915214053.28890.63065.malonedeb@gangotri.ubuntu.com> Message-ID: <20060915214053.28890.63065.malonedeb@gangotri.ubuntu.com> Public bug reported: Binary package hint: ndiswrapper-common edgy ndiswrapper and loadndiswrapper scripts can't find the binary (ndiswrapper-1.1 and loadndiswrapper-1.1), and when i replaced them with symlinks to the right binaries i couldn't load the kernel module anyway. It totally refused to load. ** Affects: ndiswrapper (Ubuntu) Importance: Untriaged Status: Unconfirmed ** Summary changed: - ndiswrapper-common cant find ndiswrapper-1.1 etc... + edgy ndiswrapper-common cant find ndiswrapper-1.1 etc... ** Description changed: Binary package hint: ndiswrapper-common - ndiswrapper and loadndiswrapper scripts can't find the binary + edgy ndiswrapper and loadndiswrapper scripts can't find the binary (ndiswrapper-1.1 and loadndiswrapper-1.1), and when i replaced them with symlinks to the right binaries i couldn't load the kernel module anyway. It totally refused to load. -- edgy ndiswrapper-common cant find ndiswrapper-1.1 etc... https://launchpad.net/bugs/60630 From ubuntu-launchpad at theplayboymansion.net Fri Sep 15 23:25:16 2006 From: ubuntu-launchpad at theplayboymansion.net (ph8) Date: Fri, 15 Sep 2006 23:25:16 -0000 Subject: [Bug 57502] Re: JMicron PATA/SATA Controller does not work References: <20060823192235.13463.13121.malonedeb@gandwana.ubuntu.com> Message-ID: <20060915232516.28890.20845.malone@gangotri.ubuntu.com> This change hasn't made it into the changelogs yet, there seem to be a *lot* of us waiting for this, I for one am sitting here with a completely useless system as once i've got past the CDROM problem (by booting from USB disk), my SATA 2s aren't then recognised! Do you know when this package will next be recompiled and hence, added to the daily build? -- JMicron PATA/SATA Controller does not work https://launchpad.net/bugs/57502 From mah at everybody.org Fri Sep 15 23:37:16 2006 From: mah at everybody.org (Mark A. Hershberger) Date: Fri, 15 Sep 2006 23:37:16 -0000 Subject: [Bug 59852] x60 sound doesn't work in ubuntu References: <20060911021229.12752.45748.malonedeb@gandwana.ubuntu.com> Message-ID: <20060915233716.28941.61602.launchpad@canonical@gandwana.ubuntu.com> Public bug reported: I just booted up in edgy and sound is no longer working. ** Affects: linux-source-2.6.15 (Ubuntu) Importance: Medium Status: Needs Info -- x60 sound doesn't work in ubuntu https://launchpad.net/bugs/59852 From mark.nurse at gmail.com Fri Sep 15 23:36:33 2006 From: mark.nurse at gmail.com (Mark F) Date: Fri, 15 Sep 2006 23:36:33 -0000 Subject: [Bug 60563] Re: freezes on startup, worked before update on 14/09/2006 References: <20060915130815.28941.90440.malonedeb@gandwana.ubuntu.com> Message-ID: <20060915233633.28941.74160.malone@gandwana.ubuntu.com> lspci --vv gives 0000:00:00.0 Host bridge: Silicon Integrated Systems [SiS] 760/M760 Host (rev 03) Subsystem: Foxconn International, Inc.: Unknown device 0c92 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- Capabilities: [d0] #08 [0120] Capabilities: [f0] #08 [8000] 0000:00:01.0 PCI bridge: Silicon Integrated Systems [SiS] SG86C202 (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- Reset- FastB2B- 0000:00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS964 [MuTIOL Media IO] (rev 36) Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- Region 1: I/O ports at Region 2: I/O ports at Region 3: I/O ports at Region 4: I/O ports at 4000 [size=16] 0000:00:02.7 Multimedia audio controller: Silicon Integrated Systems [SiS] Sound Controller (rev a0) Subsystem: Foxconn International, Inc.: Unknown device 0c92 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- Capabilities: [58] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 0000:00:08.0 Communication controller: Conexant HCF V90 56k Data/Fax/Voice/Spkp PCI Modem (rev 08) Subsystem: Conexant HCF V90 56k Data/Fax/Voice/Spkp PCI Modem Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- lspci-vvn gives 0000:00:00.0 0600: 1039:0760 (rev 03) Subsystem: 105b:0c92 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- 0000:00:01.0 0604: 1039:0002 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- Reset- FastB2B- 0000:00:02.0 0601: 1039:0964 (rev 36) Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- Region 1: I/O ports at Region 2: I/O ports at Region 3: I/O ports at Region 4: I/O ports at 4000 [size=16] 0000:00:02.7 0401: 1039:7012 (rev a0) Subsystem: 105b:0c92 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- 0000:00:03.0 0c03: 1039:7001 (rev 0f) (prog-if 10) Subsystem: 105b:0c92 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- 0000:00:04.0 0200: 1039:0900 (rev 91) Subsystem: 105b:0c92 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- 0000:00:05.0 0101: 1039:0180 (rev 01) (prog-if 85 [Master SecO PriO]) Subsystem: 105b:0c92 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- Capabilities: 0000:00:08.0 0780: 14f1:1085 (rev 08) Subsystem: 14f1:1085 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- 0000:00:18.0 0600: 1022:1100 Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- 0000:00:18.1 0600: 1022:1101 Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- Just Rhythmbox freezes. The frames come up but none of the outlines or text ionside, or any of the menubar text etc; just the outlines. Don't know if that helps. (Noob) -- freezes on startup, worked before update on 14/09/2006 https://launchpad.net/bugs/60563 From crimsun at fungus.sh.nu Fri Sep 15 23:37:16 2006 From: crimsun at fungus.sh.nu (Daniel T Chen) Date: Fri, 15 Sep 2006 23:37:16 -0000 Subject: [Bug 59852] Re: x60 sound doesn't work in ubuntu References: <20060911021229.12752.45748.malonedeb@gandwana.ubuntu.com> Message-ID: <20060915233716.28941.51552.malone@gandwana.ubuntu.com> Is snd-hda-intel loaded? Is the modem _enabled_ in bios? Are you using the latest bios? ** Changed in: Ubuntu Sourcepackagename: None => linux-source-2.6.15 Status: Unconfirmed => Needs Info -- x60 sound doesn't work in ubuntu https://launchpad.net/bugs/59852 From jdangler at atlantic.net Sat Sep 16 02:36:38 2006 From: jdangler at atlantic.net (gymsmoke) Date: Sat, 16 Sep 2006 02:36:38 -0000 Subject: [Bug 60660] regression References: <20060916023638.28941.60627.malonedeb@gandwana.ubuntu.com> Message-ID: <20060916023638.28941.60627.malonedeb@gandwana.ubuntu.com> Public bug reported: Just updated the kernel and headers to 2.6.15.26 and I have a silent machine. I checked alsamixer, and the channels aren't muted. I checked desktop sound, and it is enabled. Sound was working fine under the previous kernel (2.6.15.25) lspci 0000:00:00.0 Host bridge: Intel Corporation 82845 845 (Brookdale) Chipset Host Bridge (rev 11) 0000:00:01.0 PCI bridge: Intel Corporation 82845 845 (Brookdale) Chipset AGP Bridge (rev 11) 0000:00:1d.0 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 01) 0000:00:1d.1 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 01) 0000:00:1d.2 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 (rev 01) 0000:00:1d.7 USB Controller: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller (rev 01) 0000:00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 81) 0000:00:1f.0 ISA bridge: Intel Corporation 82801DB/DBL (ICH4/ICH4-L) LPC Interface Bridge (rev 01) 0000:00:1f.1 IDE interface: Intel Corporation 82801DB (ICH4) IDE Controller (rev 01) 0000:00:1f.3 SMBus: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller (rev 01) 0000:00:1f.5 Multimedia audio controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 01) 0000:01:00.0 VGA compatible controller: nVidia Corporation NV17 [GeForce4 MX 420] (rev a3) 0000:02:01.0 Communication controller: Conexant HSF 56k Data/Fax/Voice/Spkp Modem (rev 01) 0000:02:02.0 Ethernet controller: Davicom Semiconductor, Inc. 21x4x DEC-Tulip compatible 10/100 Ethernet (rev 31) ** Affects: linux-source-2.6.15 (Ubuntu) Importance: Untriaged Status: Unconfirmed -- regression https://launchpad.net/bugs/60660 From crimsun at fungus.sh.nu Sat Sep 16 03:00:39 2006 From: crimsun at fungus.sh.nu (Daniel T Chen) Date: Sat, 16 Sep 2006 03:00:39 -0000 Subject: [Bug 60660] Re: regression References: <20060916023638.28941.60627.malonedeb@gandwana.ubuntu.com> Message-ID: <20060916030039.28762.69445.malone@gandwana.ubuntu.com> Please attach the output from ``cat /proc/asound/cards && amixer''. ** Changed in: linux-source-2.6.15 (Ubuntu) Importance: Untriaged => Low Status: Unconfirmed => Needs Info -- regression https://launchpad.net/bugs/60660 From ben.collins at ubuntu.com Sat Sep 16 03:14:14 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Sat, 16 Sep 2006 03:14:14 -0000 Subject: [Bug 57502] Re: JMicron PATA/SATA Controller does not work References: <20060823192235.13463.13121.malonedeb@gandwana.ubuntu.com> Message-ID: <20060916031414.28941.86852.launchpad@gandwana.ubuntu.com> ** Changed in: linux-source-2.6.17 (Ubuntu) Importance: Untriaged => Medium Assignee: Victor Petrov => Ben Collins Status: Fix Committed => In Progress ** Also affects: linux-source-2.6.15 (Ubuntu) Importance: Untriaged Status: Unconfirmed ** Changed in: linux-source-2.6.15 (Ubuntu) Importance: Untriaged => Medium Assignee: (unassigned) => Ben Collins Status: Unconfirmed => In Progress Target: None => dapper-updates -- JMicron PATA/SATA Controller does not work https://launchpad.net/bugs/57502 From dehaeck at vki.ac.be Sat Sep 16 03:25:24 2006 From: dehaeck at vki.ac.be (samdehaeck) Date: Sat, 16 Sep 2006 03:25:24 -0000 Subject: [Bug 60038] Scrambled sound in edgy eft alpha2 References: <20060912080228.17818.92061.malonedeb@gandwana.ubuntu.com> Message-ID: <20060916032524.28941.59843.launchpad@canonical@gandwana.ubuntu.com> Public bug reported: Binary package hint: alsa-base Hello, I just downloaded and tried the new edgy eft alpha2 live cd. This did not boot into gnome. It halted before showing the desktop. Dropping to a console and killing all things esd unblocked this and I could work happily in gnome. However, the problem is not related to esd since I cannot get any sound out of my laptop. This was no problem whatsoever with Breezy. The problem started with Dapper and I filed a bug then as well (bug 40176). For more details on my laptop please visit that bug report. What happens when I run $aplay anysound.wav is that I hear approximately the first second of sound repeated twice and then nothing anymore. Thus, it is, in my opinion, not related to the mixer settings. Also, very importantly, this command does not exit normally. I have to kill it manually. This obviously explains the halt in the gnome booting process. (Note that with KDE and XFCE I also get no sound, but at least these desktops finish the boot process!). Additionally, both Knoppix 5 and the recent mandriva also provide me with no sound. Thanks in advance. Sam. ** Affects: linux-source-2.6.15 (Ubuntu) Importance: Low Status: Needs Info -- Scrambled sound in edgy eft alpha2 https://launchpad.net/bugs/60038 From crimsun at fungus.sh.nu Sat Sep 16 03:25:21 2006 From: crimsun at fungus.sh.nu (Daniel T Chen) Date: Sat, 16 Sep 2006 03:25:21 -0000 Subject: [Bug 60038] Re: Scrambled sound in edgy eft alpha2 References: <20060912080228.17818.92061.malonedeb@gandwana.ubuntu.com> Message-ID: <20060916032523.28941.60605.malone@gandwana.ubuntu.com> Please try Edgy Knot 3. ** Changed in: alsa-driver (Ubuntu) Sourcepackagename: alsa-driver => linux-source-2.6.15 Importance: Untriaged => Low Status: Unconfirmed => Needs Info ** Summary changed: - Scrambled sound in edgy eft alpha2 + Scrambled sound in Edgy Eft Knot 2 -- Scrambled sound in Edgy Eft Knot 2 https://launchpad.net/bugs/60038 From ben.collins at ubuntu.com Sat Sep 16 03:37:41 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Sat, 16 Sep 2006 03:37:41 -0000 Subject: [Bug 57502] Re: JMicron PATA/SATA Controller does not work References: <20060823192235.13463.13121.malonedeb@gandwana.ubuntu.com> Message-ID: <20060916033742.28890.32574.launchpad@gangotri.ubuntu.com> ** Changed in: linux-source-2.6.15 (Ubuntu) Status: In Progress => Fix Committed ** Changed in: linux-source-2.6.17 (Ubuntu) Status: In Progress => Fix Committed -- JMicron PATA/SATA Controller does not work https://launchpad.net/bugs/57502 From reubend at gmail.com Sat Sep 16 03:57:50 2006 From: reubend at gmail.com (Exclamation) Date: Sat, 16 Sep 2006 03:57:50 -0000 Subject: [Bug 59715] alsa snd-hda-intel hp laptops References: <20060910011502.16587.53684.malonedeb@gangotri.ubuntu.com> Message-ID: <20060916035750.28762.79430.launchpad@canonical@gandwana.ubuntu.com> Public bug reported: Binary package hint: alsa-base alsa bug report: https://bugtrack.alsa-project.org/alsa-bug/view.php?id=2412 patch must be applied for headphone support on newer hp/compaq laptops. ** Affects: linux-source-2.6.15 (Ubuntu) Importance: Medium Status: Fix Committed -- alsa snd-hda-intel hp laptops https://launchpad.net/bugs/59715 From pc741tw at gmail.com Sat Sep 16 03:50:09 2006 From: pc741tw at gmail.com (MENG HSING.TUNG) Date: Sat, 16 Sep 2006 03:50:09 -0000 Subject: [Bug 57502] Re: JMicron PATA/SATA Controller does not work References: <20060823192235.13463.13121.malonedeb@gandwana.ubuntu.com> Message-ID: <20060916035009.28762.33256.malone@gandwana.ubuntu.com> I want to know when this package will fix,and added to the daily build!! -- JMicron PATA/SATA Controller does not work https://launchpad.net/bugs/57502 From crimsun at fungus.sh.nu Sat Sep 16 03:57:50 2006 From: crimsun at fungus.sh.nu (Daniel T Chen) Date: Sat, 16 Sep 2006 03:57:50 -0000 Subject: [Bug 59715] Re: alsa snd-hda-intel hp laptops References: <20060910011502.16587.53684.malonedeb@gangotri.ubuntu.com> Message-ID: <20060916035750.28762.66791.malone@gandwana.ubuntu.com> https://lists.ubuntu.com/archives/kernel-team/2006-September/001063.html ** Changed in: alsa-driver (Ubuntu) Sourcepackagename: alsa-driver => linux-source-2.6.15 Importance: Untriaged => Medium Status: Unconfirmed => Fix Committed -- alsa snd-hda-intel hp laptops https://launchpad.net/bugs/59715 From crimsun at fungus.sh.nu Sat Sep 16 04:01:01 2006 From: crimsun at fungus.sh.nu (Daniel T Chen) Date: Sat, 16 Sep 2006 04:01:01 -0000 Subject: [Bug 58020] Re: VIA audio on Sharp PC-AV18 incorrectly loads VIA DXS References: <20060828173021.17097.42638.malonedeb@gangotri.ubuntu.com> Message-ID: <20060916040101.28941.89892.malone@gandwana.ubuntu.com> For instance, in a Terminal: kill $(lsof -t /dev/dsp* /dev/snd/*) ; sudo modprobe -r snd-via82xx && sudo modprobe snd-via82xx dxs_support=2 -- VIA audio on Sharp PC-AV18 incorrectly loads VIA DXS https://launchpad.net/bugs/58020 From igor4u at gmail.com Sat Sep 16 06:53:37 2006 From: igor4u at gmail.com (Igor Zubarev) Date: Sat, 16 Sep 2006 06:53:37 -0000 Subject: [Bug 38851] Re: Problems accessing Sony DRU-810A DVD drive References: <20060409104131.32313.6704.malonedeb@gandwana.ubuntu.com> Message-ID: <20060916065337.28762.56566.malone@gandwana.ubuntu.com> My DVD-drive on Sony VAIO VGN-FS115MR stops reading disc after some time. I tryed DVD+RW, CD-R Dapper, kernel 2.6.15-26 -- Problems accessing Sony DRU-810A DVD drive https://launchpad.net/bugs/38851 From juan.villa at gmail.com Sat Sep 16 06:51:58 2006 From: juan.villa at gmail.com (juanqui) Date: Sat, 16 Sep 2006 06:51:58 -0000 Subject: [Bug 36014] Re: kernel can't scale cpu frequency References: <20060322140248.30471.37870.malonedeb@gangotri.ubuntu.com> Message-ID: <20060916065158.28890.70326.malone@gangotri.ubuntu.com> I can confirm twhat mvandeg is saying. Frequency scaling does not work in Edgy Kernel 2.6.17-7.20 generic. When I try to manually scale the frequency /proc/cpu still reports the same CPU speed. I have a dv2000t with an Intel Core 2 Duo (2.0ghz). -- kernel can't scale cpu frequency https://launchpad.net/bugs/36014 From michael at masuran.org Sat Sep 16 07:12:31 2006 From: michael at masuran.org (Michael Anckaert) Date: Sat, 16 Sep 2006 07:12:31 -0000 Subject: [Bug 57502] Re: JMicron PATA/SATA Controller does not work References: <20060823192235.13463.13121.malonedeb@gandwana.ubuntu.com> Message-ID: <20060916071231.28823.66611.malone@gangotri.ubuntu.com> Bug confirmed. MSI P965 NEO-F motherboard. Really hope the fix gets in Edgy Eft, a lot of people (basically all people with a Core 2 Duo chipset + others) are affected by this problem. -- JMicron PATA/SATA Controller does not work https://launchpad.net/bugs/57502 From stefan-r-ubz at s5r6.in-berlin.de Sat Sep 16 07:23:37 2006 From: stefan-r-ubz at s5r6.in-berlin.de (Stefan Richter) Date: Sat, 16 Sep 2006 07:23:37 -0000 Subject: [Bug 28691] Re: amd64 kernel locks on firewire ipod unplugging References: <20060116152545.30333.48749.malonedeb@gangotri.ubuntu.com> Message-ID: <20060916072337.28941.31512.malone@gandwana.ubuntu.com> See bug #28647. -- amd64 kernel locks on firewire ipod unplugging https://launchpad.net/bugs/28691 From cjwatson at canonical.com Sat Sep 16 07:46:55 2006 From: cjwatson at canonical.com (Colin Watson) Date: Sat, 16 Sep 2006 07:46:55 -0000 Subject: [Bug 52679] Re: Linux upgrade doesn't update symlinks used by yaboot References: <20060711192201.27257.9057.malonedeb@gangotri.ubuntu.com> Message-ID: <20060916074655.28762.66464.launchpad@gandwana.ubuntu.com> ** Changed in: ubiquity (Ubuntu) Importance: Untriaged => High ** Summary changed: - Linux upgrade doesn't update symlinks used by yaboot + link_in_boot not set correctly ** Description changed: - Binary package hint: linux-image-2.6.15-26-powerpc - The Linux kernel upgrades for dapper quietly fail because they update the initrd.img and vmlinux symlinks in /, but not the ones in /boot which yaboot uses. The result is that after reboot I'm still using the old (vulnerable) kernel. This copy of dapper was a fresh install just after dapper came out, and /etc/yaboot.conf hasn't been altered by hand - it always referred to /boot/initrd.img and /boot/vmlinux (and .old symlinks, which don't exist). -- link_in_boot not set correctly https://launchpad.net/bugs/52679 From holindho at cs.helsinki.fi Sat Sep 16 08:13:29 2006 From: holindho at cs.helsinki.fi (Heikki Lindholm) Date: Sat, 16 Sep 2006 08:13:29 -0000 Subject: [Bug 60685] radeonfb fails to probe EDID on a PowerBook G4 (TiBook) References: <20060916081329.28941.18816.malonedeb@gandwana.ubuntu.com> Message-ID: <20060916081329.28941.18816.malonedeb@gandwana.ubuntu.com> Public bug reported: I have a 667 MHz PowerBook3,4, which has a "Radeon Mobility M7 LW [Radeon Mobility 7500]." The default boot-up on Dapper, where radeonfb is used, fails very often and it _seems_ even more so after the 2.6.15-26.47 (after more than 20 boots I finally got a working console.) The failure manifests itself as a non-synced display, eg. the display shows a grey bar or random flickering trash. Now, I compared the dmesg output of a failed boot attempt (ssh'ing into the machine) and a successful boot attempt, and there is a difference: Successfull boot: [ 28.799644] radeonfb: Monitor 1 type LCD found [ 28.799652] radeonfb: EDID probed [ 28.799657] radeonfb: Monitor 2 type no found [ 28.799674] radeonfb: Using Firmware dividers 0x0002008e from PPLL 0 [ 28.958642] radeonfb: Dynamic Clock Power Management enabled Failed boot: [ 27.818747] radeonfb: Monitor 1 type LCD found [ 27.818756] radeonfb: Monitor 2 type no found [ 27.818767] radeonfb: Using Firmware dividers 0x0002008e from PPLL 0 [ 27.818776] radeonfb: Assuming panel size 8x1 [ 27.977745] radeonfb: Dynamic Clock Power Management enabled Notice that the failed boot finds the LCD monitor, but does not, for whatever reason, probe the EDID and goes on to assume a grand 8x1 panel! Additionally, any similar issue has NEVER happened when booting to Mac OS X and this problem has been around from at least 2.6.9 kernel, which I remember using with Debian before switching to Dapper. Usually booting between OS X and Linux corrects the problem, whereas successive attempts to boot Linux just fail in a row. ** Affects: linux-source-2.6.15 (Ubuntu) Importance: Untriaged Status: Unconfirmed -- radeonfb fails to probe EDID on a PowerBook G4 (TiBook) https://launchpad.net/bugs/60685 From pug at nerd.dk Sat Sep 16 08:15:44 2006 From: pug at nerd.dk (pug) Date: Sat, 16 Sep 2006 08:15:44 -0000 Subject: [Bug 59852] Re: x60 sound doesn't work in ubuntu References: <20060911021229.12752.45748.malonedeb@gandwana.ubuntu.com> Message-ID: <20060916081544.28762.7876.malone@gandwana.ubuntu.com> After upgrading bios and turning on modem, sound now works (not sure if upgrading the bios helped). My thinkpad came shipped with the modem turned off. I will never ever use the modem. I still think its a bug that ubuntu can't startup sound if the modem is turned off (snd-hda-intel is loaded, it just for some odd reason fails to work). As far as I remember turning on the modem also drains the power faster when running on battery... -- x60 sound doesn't work in ubuntu https://launchpad.net/bugs/59852 From luca.ermidoro at mind.it Sat Sep 16 08:30:29 2006 From: luca.ermidoro at mind.it (luca) Date: Sat, 16 Sep 2006 08:30:29 -0000 Subject: [Bug 38865] Re: sky2 driver freezing system after ifdown and ifup References: <20060409125752.32313.97119.malonedeb@gandwana.ubuntu.com> Message-ID: <20060916083029.28823.43573.malone@gangotri.ubuntu.com> Hi Ben, the last update (.47) containing sk98lin driver definitely broke my network access. The sky2 driver on .46 was working correctly. Since I read that other people are exactly in the opposite situation (they have problems using sky2 driver), is there a way to let each user choose which driver to use? -- sky2 driver freezing system after ifdown and ifup https://launchpad.net/bugs/38865 From stefan-r-ubz at s5r6.in-berlin.de Sat Sep 16 09:28:08 2006 From: stefan-r-ubz at s5r6.in-berlin.de (Stefan Richter) Date: Sat, 16 Sep 2006 09:28:08 -0000 Subject: [Bug 36619] Re: usb-mass storage disk isn't recognized the right way References: <20060325183618.6253.2445.malonedeb@gandwana.ubuntu.com> Message-ID: <20060916092808.28762.62642.malone@gandwana.ubuntu.com> The regression I referred to in comment 4 went into Ubuntu Dapper too, as part of a bugfix for other devices. Ubuntu Edgy has the regression fixed: http://www.kernel.org/git/?p=linux/kernel/git/bcollins/ubuntu-2.6.git;a=commitdiff;h=a54c9d30dbb06391ec4422aaf0e1dc2c8c53bd3e -- usb-mass storage disk isn't recognized the right way https://launchpad.net/bugs/36619 From holindho at cs.helsinki.fi Sat Sep 16 13:43:30 2006 From: holindho at cs.helsinki.fi (Heikki Lindholm) Date: Sat, 16 Sep 2006 13:43:30 -0000 Subject: [Bug 60685] Re: radeonfb fails to probe EDID on a PowerBook G4 (TiBook) References: <20060916081329.28941.18816.malonedeb@gandwana.ubuntu.com> Message-ID: <20060916134331.28890.54662.malone@gangotri.ubuntu.com> Recompiled the kernel with Dapper default .config except enabled radeonfb debug. Here's a successful boot dmesg. ** Attachment added: "Successful boot dmesg." http://librarian.launchpad.net/4290135/dmesgok -- radeonfb fails to probe EDID on a PowerBook G4 (TiBook) https://launchpad.net/bugs/60685 From holindho at cs.helsinki.fi Sat Sep 16 13:44:11 2006 From: holindho at cs.helsinki.fi (Heikki Lindholm) Date: Sat, 16 Sep 2006 13:44:11 -0000 Subject: [Bug 60685] Re: radeonfb fails to probe EDID on a PowerBook G4 (TiBook) References: <20060916081329.28941.18816.malonedeb@gandwana.ubuntu.com> Message-ID: <20060916134411.28890.17139.malone@gangotri.ubuntu.com> Like the above, but for a failed boot. ** Attachment added: "Failed boot dmesg." http://librarian.launchpad.net/4290140/dmesgfailed -- radeonfb fails to probe EDID on a PowerBook G4 (TiBook) https://launchpad.net/bugs/60685 From jdangler at atlantic.net Sat Sep 16 14:38:11 2006 From: jdangler at atlantic.net (gymsmoke) Date: Sat, 16 Sep 2006 14:38:11 -0000 Subject: [Bug 60660] Re: regression References: <20060916023638.28941.60627.malonedeb@gandwana.ubuntu.com> Message-ID: <20060916143811.28762.5463.malone@gandwana.ubuntu.com> gymsmoke at croatus:~$ cat /proc/asound/cards &&amixer 0 [I82801DBICH4 ]: ICH4 - Intel 82801DB-ICH4 Intel 82801DB-ICH4 with AD1981A at 0xfebff800, irq 201 1 [U0x46d0x8b0 ]: USB-Audio - USB Device 0x46d:0x8b0 USB Device 0x46d:0x8b0 at usb-0000:00:1d.2-1, full speed Simple mixer control 'Master',0 Capabilities: pvolume pswitch Playback channels: Front Left - Front Right Limits: Playback 0 - 31 Mono: Front Left: Playback 16 [52%] [on] Front Right: Playback 16 [52%] [on] Simple mixer control 'Master Mono',0 Capabilities: pvolume pvolume-joined pswitch pswitch-joined Playback channels: Mono Limits: Playback 0 - 31 Mono: Playback 15 [48%] [off] Simple mixer control 'Headphone',0 Capabilities: pvolume pswitch Playback channels: Front Left - Front Right Limits: Playback 0 - 31 Mono: Front Left: Playback 13 [42%] [on] Front Right: Playback 13 [42%] [on] Simple mixer control 'Headphone Jack Sense',0 Capabilities: pswitch pswitch-joined Playback channels: Mono Mono: Playback [off] Simple mixer control 'PCM',0 Capabilities: pvolume pswitch Playback channels: Front Left - Front Right Limits: Playback 0 - 31 Mono: Front Left: Playback 14 [45%] [off] Front Right: Playback 14 [45%] [off] Simple mixer control 'Line',0 Capabilities: pvolume pswitch cswitch cswitch-joined cswitch-exclusive Capture exclusive group: 0 Playback channels: Front Left - Front Right Capture channels: Front Left - Front Right Limits: Playback 0 - 31 Front Left: Playback 22 [71%] [off] Capture [off] Front Right: Playback 22 [71%] [off] Capture [off] Simple mixer control 'Line Jack Sense',0 Capabilities: pswitch pswitch-joined Playback channels: Mono Mono: Playback [off] Simple mixer control 'CD',0 Capabilities: pvolume pswitch cswitch cswitch-joined cswitch-exclusive Capture exclusive group: 0 Playback channels: Front Left - Front Right Capture channels: Front Left - Front Right Limits: Playback 0 - 31 Front Left: Playback 17 [55%] [on] Capture [off] Front Right: Playback 17 [55%] [on] Capture [off] Simple mixer control 'Mic',0 Capabilities: pvolume pvolume-joined pswitch pswitch-joined cswitch cswitch-joined cswitch-exclusive Capture exclusive group: 0 Playback channels: Mono Capture channels: Front Left - Front Right Limits: Playback 0 - 31 Mono: Playback 17 [55%] [off] Front Left: Capture [on] Front Right: Capture [on] Simple mixer control 'Mic Boost (+20dB)',0 Capabilities: pswitch pswitch-joined Playback channels: Mono Mono: Playback [off] Simple mixer control 'Video',0 Capabilities: cswitch cswitch-joined cswitch-exclusive Capture exclusive group: 0 Capture channels: Front Left - Front Right Front Left: Capture [off] Front Right: Capture [off] Simple mixer control 'Phone',0 Capabilities: pvolume pvolume-joined pswitch pswitch-joined cswitch cswitch-joined cswitch-exclusive Capture exclusive group: 0 Playback channels: Mono Capture channels: Front Left - Front Right Limits: Playback 0 - 31 Mono: Playback 15 [48%] [off] Front Left: Capture [off] Front Right: Capture [off] Simple mixer control 'Aux',0 Capabilities: pvolume pswitch cswitch cswitch-joined cswitch-exclusive Capture exclusive group: 0 Playback channels: Front Left - Front Right Capture channels: Front Left - Front Right Limits: Playback 0 - 31 Front Left: Playback 14 [45%] [off] Capture [off] Front Right: Playback 14 [45%] [off] Capture [off] Simple mixer control 'Capture',0 Capabilities: cvolume cswitch Capture channels: Front Left - Front Right Limits: Capture 0 - 15 Front Left: Capture 0 [0%] [on] Front Right: Capture 0 [0%] [on] Simple mixer control 'Mix',0 Capabilities: cswitch cswitch-joined cswitch-exclusive Capture exclusive group: 0 Capture channels: Front Left - Front Right Front Left: Capture [off] Front Right: Capture [off] Simple mixer control 'Mix Mono',0 Capabilities: cswitch cswitch-joined cswitch-exclusive Capture exclusive group: 0 Capture channels: Front Left - Front Right Front Left: Capture [off] Front Right: Capture [off] Simple mixer control 'External Amplifier',0 Capabilities: pswitch pswitch-joined Playback channels: Mono Mono: Playback [on] gymsmoke at croatus:~$ -- regression https://launchpad.net/bugs/60660 From bernardo at bandos.net Sat Sep 16 15:50:00 2006 From: bernardo at bandos.net (Jose Bernardo) Date: Sat, 16 Sep 2006 15:50:00 -0000 Subject: [Bug 28647] Re: sbp2 hot plug causes hard crashes References: <20060116010423.6087.7224.malonedeb@gangotri.ubuntu.com> Message-ID: <20060916155000.28762.59763.malone@gandwana.ubuntu.com> Going to edgy seems to have solved it, the computer no longer hangs, even though the ieee1394 drive stops answering after a couple of minutes and doesn't recover. Working thru the usb interface I see no offlines or disconnects, so it isn't all solved yet - or maybe it is the pc ieee1394 adapter, or the enclosure, that are defective. -- sbp2 hot plug causes hard crashes https://launchpad.net/bugs/28647 From mah at everybody.org Sat Sep 16 17:34:54 2006 From: mah at everybody.org (Mark A. Hershberger) Date: Sat, 16 Sep 2006 17:34:54 -0000 Subject: [Bug 59852] Re: [Bug 59852] Re: x60 sound doesn't work in ubuntu References: <20060911021229.12752.45748.malonedeb@gandwana.ubuntu.com> <20060916081544.28762.7876.malone@gandwana.ubuntu.com> Message-ID: <87ac4ziukh.fsf@everybody.org> You don't have to rely on the alsa* utils, you could also use the gnome volume control applet. -- x60 sound doesn't work in ubuntu https://launchpad.net/bugs/59852 From ake.sandgren at hpc2n.umu.se Sat Sep 16 17:38:55 2006 From: ake.sandgren at hpc2n.umu.se (ake sandgren) Date: Sat, 16 Sep 2006 17:38:55 -0000 Subject: [Bug 60776] ibm_acpi in dapper kernel (2.6.15-26.47) doesn't recognize the bay on X60s ultrabay systems References: <20060916173855.28762.11927.malonedeb@gandwana.ubuntu.com> Message-ID: <20060916173855.28762.11927.malonedeb@gandwana.ubuntu.com> Public bug reported: The ibm_acpi driver in 2.6.15-26.47 and older doesn't find the bay drive on the X60s ultrabay system. Patch to recognize it is: --- drivers/acpi/ibm_acpi.c 2006-03-02 22:18:37.000000000 +0100 +++ drivers/acpi/ibm_acpi.c 2006-09-15 08:20:40.734250013 +0200 @@ -169,6 +169,7 @@ IBM_HANDLE(bay, root, "\\_SB.PCI.IDE.SECN.MAST", /* 570 */ "\\_SB.PCI0.IDE0.IDES.IDSM", /* 600e/x, 770e, 770x */ + "\\_SB.PCI0.IDE0.PRIM.MSTR", /* X60s */ "\\_SB.PCI0.IDE0.SCND.MSTR", /* all others */ ); /* A21e, R30, R31 */ ** Affects: linux-source-2.6.15 (Ubuntu) Importance: Untriaged Status: Unconfirmed -- ibm_acpi in dapper kernel (2.6.15-26.47) doesn't recognize the bay on X60s ultrabay systems https://launchpad.net/bugs/60776 From edhilone at gmail.Com Sat Sep 16 22:14:56 2006 From: edhilone at gmail.Com (Fred) Date: Sat, 16 Sep 2006 22:14:56 -0000 Subject: [Bug 60815] sky2 driver is not present References: <20060916221456.28762.75457.malonedeb@gandwana.ubuntu.com> Message-ID: <20060916221456.28762.75457.malonedeb@gandwana.ubuntu.com> Public bug reported: Binary package hint: linux-image-2.6.15-26-686 sky2 driver was present in linux-image-2.6.15-25-686, and is not in linux-image-2.6.15-26-686. sk98lin and skge does'nt recognize some Marvell on-board network interfaces, like this one : 0000:02:00.0 Ethernet controller: Marvell Technology Group Ltd.: Unknown device 4363 (rev 12) Subsystem: Fujitsu Limited.: Unknown device 139a Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Step ping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Message-ID: <20060916230242.28762.29132.malone@gandwana.ubuntu.com> I have also seen this kernel oops. For me it is repeatble if I try "iwlist scan" when then card is not yet enabled through the network manager. If the card has been enabled then everything works fine. -- system half-hangs after wifi scan https://launchpad.net/bugs/48642 From towsonu2003 at gmail.com Sat Sep 16 23:20:44 2006 From: towsonu2003 at gmail.com (towsonu2003) Date: Sat, 16 Sep 2006 23:20:44 -0000 Subject: [Bug 24828] Re: IPv6 should be disabled by default References: <20060113143101.21012.62702.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060916232044.28823.57432.malone@gangotri.ubuntu.com> > It is worse than that. In the time it takes for the IPv6 DNS request to > fail the application times out on making its connection. seems ipv6 causes connection issues as in: http://ubuntuforums.org/showthread.php?t=258686 though I'm not sure if that's a problem with the user's router or with the timeout issue as Martin Hosken puts it. -- IPv6 should be disabled by default https://launchpad.net/bugs/24828 From bruce at brmiller.ca Sun Sep 17 03:48:07 2006 From: bruce at brmiller.ca (Bruce Miller) Date: Sun, 17 Sep 2006 03:48:07 -0000 Subject: [Bug 48087] Re: RT61 driver hangs net, if interface accessed while down References: <20060602175004.5009.98804.malonedeb@gandwana.ubuntu.com> Message-ID: <20060917034807.28890.16594.malone@gangotri.ubuntu.com> I have the same experience with an AirLink 101 AWLC3026T PCMCIA card which uses the rt61 driver. -- RT61 driver hangs net, if interface accessed while down https://launchpad.net/bugs/48087 From stefan-r-ubz at s5r6.in-berlin.de Sun Sep 17 07:45:35 2006 From: stefan-r-ubz at s5r6.in-berlin.de (Stefan Richter) Date: Sun, 17 Sep 2006 07:45:35 -0000 Subject: [Bug 28647] Re: sbp2 hot plug causes hard crashes References: <20060116010423.6087.7224.malonedeb@gangotri.ubuntu.com> Message-ID: <20060917074535.28941.25436.malone@gandwana.ubuntu.com> Jose, check if sbp2 was loaded with serialize_io=1. This is loggeded in a file under /var/log/. It should be (and it is the default) as it is currently required for some devices and setups. Also, check if there are messages from sbp2 about reconnect attempts during normal I/O. This may be logged in the same or a different /var/log/ file. You can check in /etc/syslog.conf where "kern.debug"-level messages go, or just "grep -ir reconnect /var/log". There should be _no_ reconnect messages except when something was plugged in or out. Furthermore, try to find out the type of bridge chip on the FireWire enclosure's PCB. It may be possible to update the firmware of this chip. (Firmware uploaders typically run only under Windows, some also under Mac OS X; there are currently no firmware uploaders to run under Linux.) -- sbp2 hot plug causes hard crashes https://launchpad.net/bugs/28647 From peterdekraker at planet.nl Sun Sep 17 09:29:36 2006 From: peterdekraker at planet.nl (Peturrr) Date: Sun, 17 Sep 2006 09:29:36 -0000 Subject: [Bug 60893] Server Kernel update (47) prevents booting! References: <20060917092936.28941.75352.malonedeb@gandwana.ubuntu.com> Message-ID: <20060917092936.28941.75352.malonedeb@gandwana.ubuntu.com> Public bug reported: Binary package hint: linux-image-2.6.15-26-server I updated yesterday to the latest version of 2.6.15-26-server: 2.6.15-26.47 . When I rebooted today the system didn't boot, but gave a kernel panic: [quote] RAMDISK: Compressed image found at block 0 crc error VFS: cannot open root device "md0" or unknown-block(0,0) Please append a correct "root=" boot option kernel panic - not syncing: VFS: unable to mount root fs on unknown-block(0,0) [/quote] root=/dev/md0 With the other kernel on my system:2-6-15-23 and the same parameters for root etc. The system does boot. So it is not a problem with the syntax in the grub menu entry. It looks like the system can't find the raid md0 drive, possibly doesn't initialize raid properly? This is quite severe, since the only thing I did was sudo apt-get update && sudo apt-get dist-upgrade... Fortunately I am running a non-production server, but these things may NEVER occur on a server distro. ** Affects: linux-source-2.6.15 (Ubuntu) Importance: Untriaged Status: Unconfirmed -- Server Kernel update (47) prevents booting! https://launchpad.net/bugs/60893 From peterdekraker at planet.nl Sun Sep 17 09:33:22 2006 From: peterdekraker at planet.nl (Peturrr) Date: Sun, 17 Sep 2006 09:33:22 -0000 Subject: [Bug 56053] Re: Can't boot using linux-image-2.6.15-26-server References: <20060811173552.24639.13323.malonedeb@gangotri.ubuntu.com> Message-ID: <20060917093322.28890.9096.malone@gangotri.ubuntu.com> Can't you boot into recovery mode? If you press ESC during the few seconds that Grub allows you to, you can choose a kernel and if you choose recovery mode, it gives you more output. -- Can't boot using linux-image-2.6.15-26-server https://launchpad.net/bugs/56053 From karvinen+launchpad at iki.fi Sun Sep 17 10:04:40 2006 From: karvinen+launchpad at iki.fi (Tero Karvinen) Date: Sun, 17 Sep 2006 10:04:40 -0000 Subject: [Bug 24925] Re: Unlink after no-IRQ References: <20060113143135.21012.9317.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060917100440.28941.29910.malone@gandwana.ubuntu.com> I have the same problem. With default settings, USB key lights are not lit when connected, and nothing is printed on syslog. With some changes, I have succeeded to get lights lit and lines on syslog, but mounting is not possible. "sudo rmmod ehci_hcd" does not help on this system. USB key works on another Dapper installation with older updates. I see no unanswered questions in this bug report, so I change "Needs Info" to "Unconfirmed". It is very uncomfortable to see updates breaking basic things in production version. I feel that importance of this bug should be raised. Tested on $ grep DESC /etc/lsb-release DISTRIB_DESCRIPTION="Ubuntu 6.06.1 LTS" $ uname -srvm Linux 2.6.15-26-k7 #1 SMP PREEMPT Fri Sep 8 20:38:34 UTC 2006 i686 $ sudo apt-get update && sudo apt-get upgrade # 2006-09-17 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Needs Info => Unconfirmed -- Unlink after no-IRQ https://launchpad.net/bugs/24925 From bernat.tallaferro at gmail.com Sun Sep 17 12:40:51 2006 From: bernat.tallaferro at gmail.com (Bernat Tallaferro) Date: Sun, 17 Sep 2006 12:40:51 -0000 Subject: [Bug 30766] Re: [acx111] default firmware not working for acx d-link dwl-g650+ References: <20060207221213.32736.87495.malonedeb@gandwana.ubuntu.com> Message-ID: <20060917124051.28941.96283.malone@gandwana.ubuntu.com> The bug reappeared in edgy knot3. I submitted another bug about it. In case anyone else can confirm this: https://launchpad.net/distros/ubuntu/+source/linux- source-2.6.17/+bug/60905 -- [acx111] default firmware not working for acx d-link dwl-g650+ https://launchpad.net/bugs/30766 From bruce at brmiller.ca Sun Sep 17 12:54:18 2006 From: bruce at brmiller.ca (Bruce Miller) Date: Sun, 17 Sep 2006 12:54:18 -0000 Subject: [Bug 35474] Re: Dapper - RT61 with wep key doesn't work References: <20060318161032.12254.27781.malonedeb@gandwana.ubuntu.com> Message-ID: <20060917125418.28941.95442.malone@gandwana.ubuntu.com> I tested with the Edgy Eft knot 2 LiveCD using an IBM ThinkPad A21m (from about 2000) and an AirLink 101 AWLC2036T PCMCIA adapter which uses the RaLink RT61 driver. Although the adapter is PCMCIA / CardBus, lsmod reports that the driver is rt61pci. Commands which touched the interface while it was down (e.g. iwlist wlan0 scan) did not hang the terminal as has been confirmed in Dapper. They brought up the interface instead. I was, however, unable to test for WEP functionality. I was unable to get the adapter to associate to the access point barely a metre away. Both a more modern laptop and this system running off the installed Dapper associate instantly. The error was "NO DHCPOFFERS RECEIVED". This particular card does not require installing and editing a firmware file, a process described by reharpernc on ubuntforums.org in order to run under Dapper. -- Dapper - RT61 with wep key doesn't work https://launchpad.net/bugs/35474 From markus.berndt at gmail.com Sun Sep 17 16:33:26 2006 From: markus.berndt at gmail.com (Markus Berndt) Date: Sun, 17 Sep 2006 16:33:26 -0000 Subject: [Bug 41301] Re: Mouse clicks stop working sporadically References: <20060425133728.28941.55233.malonedeb@gangotri.ubuntu.com> Message-ID: <20060917163326.28890.3189.malone@gangotri.ubuntu.com> After the latest kernel update (to version 2.6.15-26.47) this issue seems to have disappeared. Is anybody else still having this problem? -- Mouse clicks stop working sporadically https://launchpad.net/bugs/41301 From jrcmuniz at gmail.com Sun Sep 17 17:50:33 2006 From: jrcmuniz at gmail.com (Joao Muniz) Date: Sun, 17 Sep 2006 17:50:33 -0000 Subject: [Bug 57502] Re: JMicron PATA/SATA Controller does not work References: <20060823192235.13463.13121.malonedeb@gandwana.ubuntu.com> Message-ID: <20060917175033.28941.10460.malone@gandwana.ubuntu.com> Dear all I found this link on www.ubuntuforums.org https://wiki.ubuntu.com/EdgyReleaseSchedule OMG, it seems that we have to wait until October 19th-26th... Cheers Joao. -- JMicron PATA/SATA Controller does not work https://launchpad.net/bugs/57502 From sean at seanmiller.net Sun Sep 17 18:01:26 2006 From: sean at seanmiller.net (Sean Miller) Date: Sun, 17 Sep 2006 18:01:26 -0000 Subject: [Bug 56425] Compaq Presario M2000 sound problem References: <20060815092348.20172.4983.malonedeb@gandwana.ubuntu.com> Message-ID: <20060917180126.28823.84925.launchpad@canonical@gangotri.ubuntu.com> Public bug reported: Since last week sometime I have been unable to get any sound out of Dapper - I assume it must be the result of one of the auto updates, but cannot be sure. Trying to bring up the Gnome Volume Applet I get "No volume control GStreamer plugins and/or devices found." It seems to have lost contact with the soundcard. I have tried re- installing various bits and pieces (Gstreamer, Gnome Media etc.) but this hasn't made any difference. Any ideas? Hardware is Compaq Presario M2000 laptop. Device manager lists IXP SB400 AC'97 Audio Controller. ** Affects: linux-source-2.6.15 (Ubuntu) Importance: Untriaged Status: Needs Info -- Compaq Presario M2000 sound problem https://launchpad.net/bugs/56425 From ubuntu at paul.sladen.org Sun Sep 17 18:04:53 2006 From: ubuntu at paul.sladen.org (Paul Sladen) Date: Sun, 17 Sep 2006 18:04:53 -0000 Subject: [Bug 56425] Re: Compaq Presario M2000 sound problem References: <20060815092348.20172.4983.malonedeb@gandwana.ubuntu.com> Message-ID: <20060917180453.28823.86947.malone@gangotri.ubuntu.com> Can you please provide the output of: /usr/bin/amixer info and /sbin/lsmod | grep snd ** Summary changed: - Dapper issues with sound + Compaq Presario M2000 sound problem ** Changed in: Ubuntu Sourcepackagename: None => linux-source-2.6.15 Status: Unconfirmed => Needs Info -- Compaq Presario M2000 sound problem https://launchpad.net/bugs/56425 From jslaker at bellsouth.net Sun Sep 17 18:18:40 2006 From: jslaker at bellsouth.net (Joseph Slaker) Date: Sun, 17 Sep 2006 18:18:40 -0000 Subject: [Bug 59867] Synaptics touchpad ceases functioning after suspend and resume. References: <20060911081849.12752.17262.malonedeb@gandwana.ubuntu.com> Message-ID: <20060917181840.28941.26770.launchpad@canonical@gandwana.ubuntu.com> Public bug reported: After suspending the notebook, resume works fine except that the Synaptics touchpad no longer responds to any input. Restarting the X server does not help. Attempting to cat /dev/input/mice at the console and then moving the touchpad does not show any input being received. The touchpad which had been /dev/input/mouse0 is no longer listed after the resume. This bug was present in Dapper and still exists in the current (2006-09-11) build of Edgy as well. Gateway MX6625 Notebook Centrino Chipset Synaptics Touchpad ** Affects: kernel-package (Ubuntu) Importance: Untriaged Status: Unconfirmed -- Synaptics touchpad ceases functioning after suspend and resume. https://launchpad.net/bugs/59867 From jslaker at bellsouth.net Sun Sep 17 18:18:39 2006 From: jslaker at bellsouth.net (Joseph Slaker) Date: Sun, 17 Sep 2006 18:18:39 -0000 Subject: [Bug 59867] Re: Synaptics touchpad ceases functioning after suspend and resume. References: <20060911081849.12752.17262.malonedeb@gandwana.ubuntu.com> Message-ID: <20060917181840.28941.24128.malone@gandwana.ubuntu.com> I believe this affects the kernel given the symptoms found, not X.org. Package listing changed appropriately. ** Changed in: xserver-xorg-input-synaptics (Ubuntu) Sourcepackagename: xserver-xorg-input-synaptics => kernel-package -- Synaptics touchpad ceases functioning after suspend and resume. https://launchpad.net/bugs/59867 From ubuntu at quinnh.org Sun Sep 17 19:47:48 2006 From: ubuntu at quinnh.org (QuinnHarris) Date: Sun, 17 Sep 2006 19:47:48 -0000 Subject: [Bug 24925] Re: Unlink after no-IRQ References: <20060113143135.21012.9317.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060917194748.28823.68259.malone@gangotri.ubuntu.com> I agree with Tero. This really should be a higher priority. This is a major regression that would effectively completely break USB for a typical user with this hardware. I think this problem suggests it could be prudent to either be more conservative with kernel updates or provide a mechanism to get these changes tested by a wider audience before they make it to an "average user". If a typical Windows user installed Ubuntu then USB just broke, they would consider Ubuntu a flaky piece of shit. Every time I google this I find more people and more Ubuntu bugs that all look like the same problem. Check Bug 53972 Bug 54273 Is this a fix? http://archives.free.net.ph/message/20060829.011900.bece9a96.en.html -- Unlink after no-IRQ https://launchpad.net/bugs/24925 From ubuntu at quinnh.org Sun Sep 17 19:53:44 2006 From: ubuntu at quinnh.org (QuinnHarris) Date: Sun, 17 Sep 2006 19:53:44 -0000 Subject: [Bug 54273] Re: USB device not accepting address: error -110 References: <20060727175359.29548.78878.malonedeb@gandwana.ubuntu.com> Message-ID: <20060917195344.28823.86170.launchpad@gangotri.ubuntu.com> ** Bug 53972 has been marked a duplicate of this bug -- USB device not accepting address: error -110 https://launchpad.net/bugs/54273 From ubuntu at quinnh.org Sun Sep 17 19:50:52 2006 From: ubuntu at quinnh.org (QuinnHarris) Date: Sun, 17 Sep 2006 19:50:52 -0000 Subject: [Bug 53972] Re: Via USB and ehci_hcd bug: USB not recognized - IRQ issue References: <20060725012915.2461.95839.malonedeb@gangotri.ubuntu.com> Message-ID: <20060917195052.28823.22083.malone@gangotri.ubuntu.com> *** This bug is a duplicate of bug 54273 *** Same problem same 2.6.15-26-686 on an Averatec 3250 laptop. It worked fine on 2.6.15-25-686 Also check: Bug 54273 Bug 24925 ** This bug has been marked a duplicate of bug 54273 USB device not accepting address: error -110 -- Via USB and ehci_hcd bug: USB not recognized - IRQ issue https://launchpad.net/bugs/53972 From ghewson at cix.compulink.co.uk Sun Sep 17 19:58:31 2006 From: ghewson at cix.compulink.co.uk (Graeme Hewson) Date: Sun, 17 Sep 2006 19:58:31 -0000 Subject: [Bug 39862] Re: [sky2] Marvell ethernet interface doesn' t work after reboot References: <20060417131032.16492.98385.malonedeb@gandwana.ubuntu.com> Message-ID: <20060917195831.28890.18107.malone@gangotri.ubuntu.com> *** This bug is a duplicate of bug 38865 *** 2.6.15-26.47 has fixed the problem. After booting from Linux to Windows and from Linux to Linux, the interface works fine. Thanks! -- [sky2] Marvell ethernet interface doesn' t work after reboot https://launchpad.net/bugs/39862 From mmeija at tripleblack.net Sun Sep 17 20:52:07 2006 From: mmeija at tripleblack.net (MMeija) Date: Sun, 17 Sep 2006 20:52:07 -0000 Subject: [Bug 60963] SGS Thomson 5in1 card reader not mounting sd References: <20060917205207.28762.71590.malonedeb@gandwana.ubuntu.com> Message-ID: <20060917205207.28762.71590.malonedeb@gandwana.ubuntu.com> Public bug reported: Binary package hint: linux-source-2.6.15 i'm not able to use my sd-flash reader in ubuntu; other operating systems handle it well hasn't worked in dapper.. i can't recall if i tried breezy i put an sd card in, the card reader light will light up for a bit and then turn off; i suppose this is an obscure device.. laptop is an acer ferrari 3400 thanks for your time Linux ferrari 2.6.15-26-686 #1 SMP PREEMPT Fri Sep 8 20:16:40 UTC 2006 i686 GNU/Linux root at ferrari:~# lsusb Bus 004 Device 002: ID 04b4:6560 Cypress Semiconductor Corp. CY7C65640 USB-2.0 "TetraHub" Bus 004 Device 001: ID 0000:0000 Bus 001 Device 001: ID 0000:0000 Bus 003 Device 002: ID 0483:0321 SGS Thomson Microelectronics Bus 003 Device 001: ID 0000:0000 Bus 002 Device 001: ID 0000:0000 dmesg: [17179569.184000] Linux version 2.6.15-26-686 (buildd at terranova) (gcc version 4.0.3 (Ubuntu 4.0.3-1ubuntu5)) #1 SMP PREEMPT Fri Sep 8 20:16:40 UTC 2006 [17179569.184000] BIOS-provided physical RAM map: [17179569.184000] BIOS-e820: 0000000000000000 - 000000000009b800 (usable) [17179569.184000] BIOS-e820: 000000000009b800 - 00000000000a0000 (reserved) [17179569.184000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) [17179569.184000] BIOS-e820: 0000000000100000 - 000000001fef0000 (usable) [17179569.184000] BIOS-e820: 000000001fef0000 - 000000001fefa000 (ACPI data) [17179569.184000] BIOS-e820: 000000001fefa000 - 000000001ff00000 (ACPI NVS) [17179569.184000] BIOS-e820: 000000001ff00000 - 0000000020000000 (reserved) [17179569.184000] BIOS-e820: 00000000fffe0000 - 0000000100000000 (reserved) [17179569.184000] 0MB HIGHMEM available. [17179569.184000] 510MB LOWMEM available. [17179569.184000] found SMP MP-table at 000f68f0 [17179569.184000] On node 0 totalpages: 130800 [17179569.184000] DMA zone: 4096 pages, LIFO batch:0 [17179569.184000] DMA32 zone: 0 pages, LIFO batch:0 [17179569.184000] Normal zone: 126704 pages, LIFO batch:31 [17179569.184000] HighMem zone: 0 pages, LIFO batch:0 [17179569.184000] DMI 2.3 present. [17179569.184000] ACPI: RSDP (v000 PTLTD ) @ 0x000f6950 [17179569.184000] ACPI: RSDT (v001 PTLTD RSDT 0x06040000 LTP 0x00000000) @ 0x1fef43e3 [17179569.184000] ACPI: FADT (v001 AMDK8 PTLTW 0x06040000 PTL_ 0x000f4240) @ 0x1fef9e1d [17179569.184000] ACPI: SSDT (v001 PTLTD POWERNOW 0x06040000 LTP 0x00000001) @ 0x1fef9e91 [17179569.184000] ACPI: MADT (v001 PTLTD APIC 0x06040000 LTP 0x00000000) @ 0x1fef9f88 [17179569.184000] ACPI: BOOT (v001 PTLTD $SBFTBL$ 0x06040000 LTP 0x00000001) @ 0x1fef9fd8 [17179569.184000] ACPI: DSDT (v001 VIA PTL_ACPI 0x06040000 MSFT 0x0100000e) @ 0x00000000 [17179569.184000] ACPI: PM-Timer IO Port: 0x4008 [17179569.184000] ACPI: Local APIC address 0xfee00000 [17179569.184000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [17179569.184000] Processor #0 15:12 APIC version 16 [17179569.184000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [17179569.184000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [17179569.184000] IOAPIC[0]: apic_id 1, version 3, address 0xfec00000, GSI 0-23 [17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) [17179569.184000] ACPI: IRQ0 used by override. [17179569.184000] ACPI: IRQ2 used by override. [17179569.184000] ACPI: IRQ10 used by override. [17179569.184000] Enabling APIC mode: Flat. Using 1 I/O APICs [17179569.184000] Using ACPI (MADT) for SMP configuration information [17179569.184000] Allocating PCI resources starting at 30000000 (gap: 20000000:dffe0000) [17179569.184000] Built 1 zonelists [17179569.184000] Kernel command line: root=/dev/hda1 ro quiet splash [17179569.184000] mapped APIC to ffffd000 (fee00000) [17179569.184000] mapped IOAPIC to ffffc000 (fec00000) [17179569.184000] Initializing CPU#0 [17179569.184000] PID hash table entries: 2048 (order: 11, 32768 bytes) [17179569.184000] Detected 2004.831 MHz processor. [17179569.184000] Using pmtmr for high-res timesource [17179569.184000] Console: colour VGA+ 80x25 [17179569.524000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [17179569.524000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [17179569.532000] Memory: 506968k/523200k available (2115k kernel code, 15576k reserved, 595k data, 332k init, 0k highmem) [17179569.532000] Checking if this processor honours the WP bit even in supervisor mode... Ok. [17179569.612000] Calibrating delay using timer specific routine.. 4014.07 BogoMIPS (lpj=8028149) [17179569.612000] Security Framework v1.0.0 initialized [17179569.612000] SELinux: Disabled at boot. [17179569.612000] Mount-cache hash table entries: 512 [17179569.612000] CPU: After generic identify, caps: 078bfbff e3d3fbff 00000000 00000000 00000000 00000000 00000000 [17179569.612000] CPU: After vendor identify, caps: 078bfbff e3d3fbff 00000000 00000000 00000000 00000000 00000000 [17179569.612000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [17179569.612000] CPU: L2 Cache: 512K (64 bytes/line) [17179569.612000] CPU: After all inits, caps: 078bfbff e3d3fbff 00000000 00000410 00000000 00000000 00000000 [17179569.612000] mtrr: v2.0 (20020519) [17179569.612000] Enabling fast FPU save and restore... done. [17179569.612000] Enabling unmasked SIMD FPU exception support... done. [17179569.612000] Checking 'hlt' instruction... OK. [17179569.628000] SMP alternatives: switching to UP code [17179569.628000] checking if image is initramfs... it is [17179570.136000] Freeing initrd memory: 6809k freed [17179570.144000] ACPI: Looking for DSDT ... not found! [17179570.148000] CPU0: AMD Mobile AMD Athlon 64 Processor 3000+ stepping 00 [17179570.148000] Total of 1 processors activated (4014.07 BogoMIPS). [17179570.148000] ENABLING IO-APIC IRQs [17179570.148000] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [17179570.292000] Brought up 1 CPUs [17179570.292000] NET: Registered protocol family 16 [17179570.292000] EISA bus registered [17179570.292000] ACPI: bus type pci registered [17179570.292000] PCI: PCI BIOS revision 2.10 entry at 0xfd64c, last bus=1 [17179570.292000] PCI: Using configuration type 1 [17179570.292000] ACPI: Subsystem revision 20051216 [17179570.292000] ACPI: Interpreter enabled [17179570.292000] ACPI: Using IOAPIC for interrupt routing [17179570.292000] ACPI: PCI Root Bridge [PCI0] (0000:00) [17179570.292000] PCI: Probing PCI hardware (bus 00) [17179570.296000] PCI quirk: region 4000-407f claimed by vt8235 PM [17179570.296000] PCI quirk: region 8100-810f claimed by vt8235 SMB [17179570.296000] Boot video device is 0000:01:00.0 [17179570.296000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [17179570.300000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] [17179570.300000] ACPI: PCI Interrupt Link [ALKA] (IRQs 16 17 18 19 20 21 22 23) *5, disabled. [17179570.300000] ACPI: PCI Interrupt Link [ALKB] (IRQs 16 17 18 19 20 21 22 23) *9, disabled. [17179570.300000] ACPI: PCI Interrupt Link [ALKC] (IRQs 22) *11, disabled. [17179570.300000] ACPI: PCI Interrupt Link [ALKD] (IRQs 21) *5, disabled. [17179570.300000] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 7 9 12 14 15) [17179570.300000] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 12 14 15) *9 [17179570.300000] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 *11 12 14 15) [17179570.300000] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 7 9 10 11 12 14 15) [17179570.300000] ACPI: Embedded Controller [EC0] (gpe 1) interrupt mode. [17179570.312000] Linux Plug and Play Support v0.97 (c) Adam Belay [17179570.312000] pnp: PnP ACPI init [17179570.312000] pnp: PnP ACPI: found 9 devices [17179570.312000] PnPBIOS: Disabled by ACPI PNP [17179570.312000] PCI: Using ACPI for IRQ routing [17179570.312000] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [17179570.316000] pnp: 00:05: ioport range 0x600-0x60f has been reserved [17179570.316000] pnp: 00:05: ioport range 0x4d0-0x4d1 has been reserved [17179570.316000] pnp: 00:05: ioport range 0xfe10-0xfe11 could not be reserved [17179570.316000] pnp: 00:05: ioport range 0xfe00-0xfe00 has been reserved [17179570.316000] PCI: Bridge: 0000:00:01.0 [17179570.316000] IO window: 2000-2fff [17179570.316000] MEM window: d0100000-d01fffff [17179570.316000] PREFETCH window: d8000000-dfffffff [17179570.316000] PCI: Bus 2, cardbus bridge: 0000:00:07.0 [17179570.316000] IO window: 00001c00-00001cff [17179570.316000] IO window: 00003000-000030ff [17179570.316000] PREFETCH window: 30000000-31ffffff [17179570.316000] MEM window: 32000000-33ffffff [17179570.316000] PCI: Setting latency timer of device 0000:00:01.0 to 64 [17179570.316000] ACPI: PCI Interrupt 0000:00:07.0[A] -> GSI 17 (level, low) -> IRQ 169 [17179570.316000] PCI: Setting latency timer of device 0000:00:07.0 to 64 [17179570.316000] Simple Boot Flag at 0x37 set to 0x1 [17179570.316000] audit: initializing netlink socket (disabled) [17179570.316000] audit(1158491693.312:1): initialized [17179570.316000] VFS: Disk quotas dquot_6.5.1 [17179570.316000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [17179570.316000] Initializing Cryptographic API [17179570.316000] io scheduler noop registered [17179570.316000] io scheduler anticipatory registered [17179570.316000] io scheduler deadline registered [17179570.316000] io scheduler cfq registered [17179570.316000] isapnp: Scanning for PnP cards... [17179570.672000] isapnp: No Plug & Play device found [17179570.684000] Real Time Clock Driver v1.12 [17179570.684000] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [17179570.684000] serio: i8042 AUX port at 0x60,0x64 irq 12 [17179570.684000] serio: i8042 KBD port at 0x60,0x64 irq 1 [17179570.684000] Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled [17179570.688000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [17179570.688000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [17179570.688000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [17179570.688000] mice: PS/2 mouse device common for all mice [17179570.688000] EISA: Probing bus 0 at eisa.0 [17179570.688000] Cannot allocate resource for EISA slot 1 [17179570.688000] Cannot allocate resource for EISA slot 2 [17179570.688000] Cannot allocate resource for EISA slot 3 [17179570.688000] Cannot allocate resource for EISA slot 4 [17179570.688000] EISA: Detected 0 cards. [17179570.688000] NET: Registered protocol family 2 [17179570.724000] IP route cache hash table entries: 4096 (order: 2, 16384 bytes) [17179570.724000] TCP established hash table entries: 16384 (order: 5, 196608 bytes) [17179570.724000] TCP bind hash table entries: 16384 (order: 5, 196608 bytes) [17179570.724000] TCP: Hash tables configured (established 16384 bind 16384) [17179570.724000] TCP reno registered [17179570.724000] TCP bic registered [17179570.724000] NET: Registered protocol family 1 [17179570.724000] NET: Registered protocol family 8 [17179570.724000] NET: Registered protocol family 20 [17179570.724000] Using IPI No-Shortcut mode [17179570.724000] ACPI wakeup devices: [17179570.724000] PCI0 USB1 USB2 USB3 GIGA Z000 [17179570.724000] ACPI: (supports S0 S3 S4 S5) [17179570.724000] Freeing unused kernel memory: 332k freed [17179570.728000] input: AT Translated Set 2 keyboard as /class/input/input0 [17179570.760000] vga16fb: initializing [17179570.760000] vga16fb: mapped to 0xc00a0000 [17179570.864000] Console: switching to colour frame buffer device 80x25 [17179570.864000] fb0: VGA16 VGA frame buffer device [17179571.932000] Capability LSM initialized [17179572.060000] ACPI: CPU0 (power states: C1[C1] C2[C2]) [17179572.064000] ACPI: Thermal Zone [THRM] (47 C) [17179572.480000] VP_IDE: IDE controller at PCI slot 0000:00:11.1 [17179572.480000] ACPI: PCI Interrupt 0000:00:11.1[A]: no GSI [17179572.480000] VP_IDE: chipset revision 6 [17179572.480000] VP_IDE: not 100% native mode: will probe irqs later [17179572.480000] VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci0000:00:11.1 [17179572.480000] ide0: BM-DMA at 0x1860-0x1867, BIOS settings: hda:DMA, hdb:pio [17179572.480000] ide1: BM-DMA at 0x1868-0x186f, BIOS settings: hdc:DMA, hdd:pio [17179572.480000] Probing IDE interface ide0... [17179572.900000] hda: IC25N080ATMR04-0, ATA DISK drive [17179573.572000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [17179573.596000] Probing IDE interface ide1... [17179574.460000] hdc: MATSHITADVD-RAM UJ-835S, ATAPI CD/DVD-ROM drive [17179574.796000] ide1 at 0x170-0x177,0x376 on irq 15 [17179574.800000] hda: max request size: 1024KiB [17179574.808000] hda: 156301488 sectors (80026 MB) w/7884KiB Cache, CHS=16383/255/63, UDMA(100) [17179574.808000] hda: cache flushes supported [17179574.808000] hda: hda1 hda2 hda3 [17179574.844000] hdc: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33) [17179574.844000] Uniform CD-ROM driver Revision: 3.20 [17179575.236000] ieee1394: Initialized config rom entry `ip1394' [17179575.244000] usbcore: registered new driver usbfs [17179575.244000] usbcore: registered new driver hub [17179575.248000] USB Universal Host Controller Interface driver v2.3 [17179575.248000] ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 177 [17179575.248000] PCI: VIA IRQ fixup for 0000:00:10.0, from 0 to 1 [17179575.248000] uhci_hcd 0000:00:10.0: UHCI Host Controller [17179575.248000] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1 [17179575.248000] uhci_hcd 0000:00:10.0: irq 177, io base 0x00001800 [17179575.248000] hub 1-0:1.0: USB hub found [17179575.248000] hub 1-0:1.0: 2 ports detected [17179575.312000] ohci1394: $Rev: 1313 $ Ben Collins [17179575.312000] ACPI: PCI Interrupt 0000:00:07.1[B] -> GSI 18 (level, low) -> IRQ 185 [17179575.352000] ACPI: PCI Interrupt 0000:00:10.1[B] -> GSI 21 (level, low) -> IRQ 177 [17179575.352000] PCI: VIA IRQ fixup for 0000:00:10.1, from 0 to 1 [17179575.352000] uhci_hcd 0000:00:10.1: UHCI Host Controller [17179575.352000] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2 [17179575.352000] uhci_hcd 0000:00:10.1: irq 177, io base 0x00001820 [17179575.352000] hub 2-0:1.0: USB hub found [17179575.352000] hub 2-0:1.0: 2 ports detected [17179575.360000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[185] MMIO=[d0015000-d00157ff] Max Packet=[2048] [17179575.456000] ACPI: PCI Interrupt 0000:00:10.2[C] -> GSI 21 (level, low) -> IRQ 177 [17179575.456000] PCI: VIA IRQ fixup for 0000:00:10.2, from 0 to 1 [17179575.456000] uhci_hcd 0000:00:10.2: UHCI Host Controller [17179575.456000] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3 [17179575.456000] uhci_hcd 0000:00:10.2: irq 177, io base 0x00001840 [17179575.456000] hub 3-0:1.0: USB hub found [17179575.456000] hub 3-0:1.0: 2 ports detected [17179575.560000] ACPI: PCI Interrupt 0000:00:10.3[D] -> GSI 21 (level, low) -> IRQ 177 [17179575.560000] ehci_hcd 0000:00:10.3: EHCI Host Controller [17179575.560000] ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4 [17179575.560000] ehci_hcd 0000:00:10.3: irq 177, io mem 0xd0015800 [17179575.560000] ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [17179575.560000] hub 4-0:1.0: USB hub found [17179575.560000] hub 4-0:1.0: 6 ports detected [17179575.592000] usb 1-1: new full speed USB device using uhci_hcd and address 2 [17179575.848000] Attempting manual resume [17179575.904000] EXT3-fs: INFO: recovery required on readonly filesystem. [17179575.904000] EXT3-fs: write access will be enabled during recovery. [17179576.536000] usb 4-1: new high speed USB device using ehci_hcd and address 2 [17179576.632000] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00c09f00004fe9cf] [17179576.668000] hub 4-1:1.0: USB hub found [17179576.668000] hub 4-1:1.0: 4 ports detected [17179577.312000] usb 3-1: new full speed USB device using uhci_hcd and address 2 [17179577.464000] SCSI subsystem initialized [17179577.464000] Initializing USB Mass Storage driver... [17179577.464000] scsi0 : SCSI emulation for USB Mass Storage devices [17179577.464000] usb-storage: device found at 2 [17179577.464000] usb-storage: waiting for device to settle before scanning [17179577.464000] usbcore: registered new driver usb-storage [17179577.464000] USB Mass Storage support registered. [17179577.508000] EXT3-fs: hda1: orphan cleanup on readonly fs [17179577.508000] kjournald starting. Commit interval 5 seconds [17179577.556000] ext3_orphan_cleanup: deleting unreferenced inode 2879291 [17179577.556000] ext3_orphan_cleanup: deleting unreferenced inode 1897467 [17179577.556000] ext3_orphan_cleanup: deleting unreferenced inode 2878966 [17179577.588000] ext3_orphan_cleanup: deleting unreferenced inode 2878927 [17179577.588000] EXT3-fs: hda1: 4 orphan inodes deleted [17179577.588000] EXT3-fs: recovery complete. [17179577.948000] EXT3-fs: mounted filesystem with ordered data mode. [17179582.468000] Vendor: Generic Model: Flash R/W Rev: 2002 [17179582.468000] Type: Direct-Access ANSI SCSI revision: 02 [17179582.468000] usb-storage: device scan complete [17179590.740000] Driver 'sd' needs updating - please use bus_type methods [17179590.756000] sd 0:0:0:0: Attached scsi removable disk sda [17179590.764000] sd 0:0:0:0: Attached scsi generic sg0 type 0 [17179591.980000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [17179592.016000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [17179592.032000] Linux agpgart interface v0.101 (c) Dave Jones [17179592.064000] agpgart: Detected AGP bridge 0 [17179592.076000] agpgart: AGP aperture is 256M @ 0xe0000000 [17179592.112000] ACPI: PCI Interrupt 0000:00:07.0[A] -> GSI 17 (level, low) -> IRQ 169 [17179592.112000] Yenta: CardBus bridge found at 0000:00:07.0 [1025:0057] [17179592.112000] Yenta: Using CSCINT to route CSC interrupts to PCI [17179592.112000] Yenta: Routing CardBus interrupts to PCI [17179592.112000] Yenta TI: socket 0000:00:07.0, mfunc 0x007c1b22, devctl 0x44 [17179592.148000] ieee80211_1_1_13_crypt: registered algorithm 'NULL' [17179592.168000] ieee80211_1_1_13: 802.11 data/management/control stack, 1.1.13 [17179592.168000] ieee80211_1_1_13: Copyright (C) 2004-2005 Intel Corporation [17179592.176000] ieee80211_crypt: registered algorithm 'NULL' [17179592.176000] ieee80211: 802.11 data/management/control stack, git-1.1.7 [17179592.176000] ieee80211: Copyright (C) 2004-2005 Intel Corporation [17179592.344000] Yenta: ISA IRQ mask 0x0af8, PCI irq 169 [17179592.344000] Socket status: 30000086 [17179592.572000] tg3.c:v3.47 (Dec 28, 2005) [17179592.572000] ACPI: PCI Interrupt 0000:00:0b.0[A] -> GSI 17 (level, low) -> IRQ 169 [17179592.596000] eth0: Tigon3 [partno(BCM95788A50) rev 3003 PHY(5705)] (PCI:33MHz:32-bit) 10/100/1000BaseT Ethernet 00:c0:9f:93:5d:0b [17179592.596000] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[0] TSOcap[1] [17179592.596000] eth0: dma_rwctrl[763f0000] [17179592.648000] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.1.1 [17179592.648000] ipw2200: Copyright(c) 2003-2006 Intel Corporation [17179592.648000] Warning: PCI driver ipw2200 has a struct device_driver shutdown method, please update! [17179592.648000] ACPI: PCI Interrupt 0000:00:09.0[A] -> GSI 19 (level, low) -> IRQ 193 [17179592.648000] ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection [17179592.724000] input: PC Speaker as /class/input/input1 [17179592.860000] Synaptics Touchpad, model: 1, fw: 5.8, id: 0x9d48b1, caps: 0x904713/0x4006 [17179592.896000] input: SynPS/2 Synaptics TouchPad as /class/input/input2 [17179593.096000] irda_init() [17179593.096000] NET: Registered protocol family 23 [17179593.108000] ipw2200: Detected geography ZZM (11 802.11bg channels, 0 802.11a channels) [17179593.188000] ts: Compaq touchscreen protocol output [17179593.416000] cs: IO port probe 0x100-0x3af: clean. [17179593.416000] cs: IO port probe 0x3e0-0x4ff: clean. [17179593.420000] cs: IO port probe 0x820-0x8ff: clean. [17179593.420000] cs: IO port probe 0xc00-0xcf7: clean. [17179593.420000] cs: IO port probe 0xa00-0xaff: clean. [17179593.708000] ACPI: PCI Interrupt 0000:00:11.6[C] -> GSI 22 (level, low) -> IRQ 201 [17179593.716000] PCI: Setting latency timer of device 0000:00:11.6 to 64 [17179593.740000] ACPI: PCI Interrupt 0000:00:11.5[C] -> GSI 22 (level, low) -> IRQ 201 [17179593.740000] PCI: Setting latency timer of device 0000:00:11.5 to 64 [17179594.896000] lp: driver loaded but no devices found [17179594.924000] sbp2: $Rev: 1306 $ Ben Collins [17179594.924000] ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1) [17179594.924000] ieee1394: sbp2: Try serialize_io=0 for better performance [17179595.308000] EXT3 FS on hda1, internal journal [17179595.544000] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 [17179595.544000] md: bitmap version 4.39 [17179596.140000] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel at redhat.com [17179597.392000] HFS+-fs: write access to a jounaled filesystem is not supported, use the force option at your own risk, mounting read-only. [17179598.924000] Adding 524280k swap on /mnt/512Mb.swap. Priority:-1 extents:150 across:536004k [17179600.292000] ACPI: AC Adapter [ACAD] (on-line) [17179600.296000] ACPI: Battery Slot [BAT1] (battery present) [17179600.360000] ACPI: Power Button (FF) [PWRF] [17179600.360000] ACPI: Power Button (CM) [PWRB] [17179600.360000] ACPI: Lid Switch [LID] [17179600.360000] ACPI: Sleep Button (CM) [SLPB] [17179600.436000] ibm_acpi: ec object not found [17179600.464000] pcc_acpi: loading... [17179600.540000] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) [17179601.044000] powernow-k8: Found 1 AMD Athlon 64 / Opteron processors (version 1.50.4) [17179601.044000] powernow-k8: 0 : fid 0xc (2000 MHz), vid 0x8 (1350 mV) [17179601.044000] powernow-k8: 1 : fid 0xa (1800 MHz), vid 0xc (1250 mV) [17179601.044000] powernow-k8: 2 : fid 0x8 (1600 MHz), vid 0xe (1200 mV) [17179601.044000] powernow-k8: 3 : fid 0x0 (800 MHz), vid 0x17 (975 mV) [17179601.044000] cpu_init done, current fid 0xc, vid 0x8 [17179606.280000] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel. [17179606.284000] [fglrx] Maximum main memory to use for locked dma buffers: 430 MBytes. [17179606.284000] [fglrx] module loaded - fglrx 8.25.18 [May 18 2006] on minor 0 [17179606.412000] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 209 [17179608.368000] [fglrx:drm_parse_option] *ERROR* "agplock" is not a valid option [17179608.368000] [fglrx] Maximum main memory to use for locked dma buffers: 430 MBytes. [17179608.368000] [fglrx] AGP detected, AgpState = 0x1f000a0b (hardware caps of chipset) [17179608.368000] agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0. [17179608.368000] agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode [17179608.368000] agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode [17179608.368000] [fglrx] AGP enabled, AgpCommand = 0x1f000302 (selected caps) [17179608.376000] [fglrx] total GART = 268435456 [17179608.376000] [fglrx] free GART = 252440576 [17179608.376000] [fglrx] max single GART = 252440576 [17179608.376000] [fglrx] total LFB = 126169088 [17179608.376000] [fglrx] free LFB = 114274304 [17179608.376000] [fglrx] max single LFB = 114274304 [17179608.376000] [fglrx] total Inv = 0 [17179608.376000] [fglrx] free Inv = 0 [17179608.376000] [fglrx] max single Inv = 0 [17179608.376000] [fglrx] total TIM = 0 [17179608.492000] ppdev: user-space parallel port driver [17179608.684000] [fglrx] total GART = 268435456 [17179608.684000] [fglrx] free GART = 252440576 [17179608.684000] [fglrx] max single GART = 252440576 [17179608.684000] [fglrx] total LFB = 126169088 [17179608.684000] [fglrx] free LFB = 102719488 [17179608.684000] [fglrx] max single LFB = 102719488 [17179608.684000] [fglrx] total Inv = 0 [17179608.684000] [fglrx] free Inv = 0 [17179608.684000] [fglrx] max single Inv = 0 [17179608.684000] [fglrx] total TIM = 0 [17179609.436000] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) [17179609.436000] apm: overridden by ACPI. [17179615.364000] tg3: eth0: Link is up at 100 Mbps, full duplex. [17179615.364000] tg3: eth0: Flow control is off for TX and off for RX. [17179618.328000] NET: Registered protocol family 17 [17179619.092000] NET: Registered protocol family 10 [17179619.092000] lo: Disabled Privacy Extensions [17179619.092000] IPv6 over IPv4 tunneling driver [17179619.872000] Bluetooth: Core ver 2.8 [17179619.872000] NET: Registered protocol family 31 [17179619.872000] Bluetooth: HCI device and connection manager initialized [17179619.872000] Bluetooth: HCI socket layer initialized [17179619.928000] Bluetooth: L2CAP ver 2.8 [17179619.928000] Bluetooth: L2CAP socket layer initialized [17179620.108000] Bluetooth: RFCOMM socket layer initialized [17179620.108000] Bluetooth: RFCOMM TTY layer initialized [17179620.108000] Bluetooth: RFCOMM ver 1.7 [17179620.876000] /dev/vmmon[5113]: Module vmmon: registered with major=10 minor=165 [17179620.876000] /dev/vmmon[5113]: Module vmmon: initialized [17179621.148000] /dev/vmnet: open called by PID 5139 (vmnet-bridge) [17179621.148000] /dev/vmnet: hub 0 does not exist, allocating memory. [17179621.148000] /dev/vmnet: port on hub 0 successfully opened [17179621.148000] bridge-eth0: enabling the bridge [17179621.148000] bridge-eth0: up [17179621.148000] bridge-eth0: already up [17179621.148000] bridge-eth0: attached [17179621.172000] /dev/vmnet: open called by PID 5154 (vmnet-netifup) [17179621.172000] /dev/vmnet: hub 1 does not exist, allocating memory. [17179621.176000] /dev/vmnet: port on hub 1 successfully opened [17179621.180000] /dev/vmnet: open called by PID 5155 (vmnet-netifup) [17179621.180000] /dev/vmnet: hub 8 does not exist, allocating memory. [17179621.180000] /dev/vmnet: port on hub 8 successfully opened [17179621.312000] /dev/vmnet: open called by PID 5153 (vmnet-natd) [17179621.312000] /dev/vmnet: port on hub 8 successfully opened [17179621.684000] /dev/vmnet: open called by PID 5172 (vmnet-dhcpd) [17179621.684000] /dev/vmnet: port on hub 8 successfully opened [17179621.688000] /dev/vmnet: open called by PID 5177 (vmnet-dhcpd) [17179621.688000] /dev/vmnet: port on hub 1 successfully opened [17179629.332000] eth1: no IPv6 routers present [17179631.460000] vmnet8: no IPv6 routers present [17179631.848000] vmnet1: no IPv6 routers present [17179632.132000] eth0: no IPv6 routers present [17211134.608000] SCSI device sda: 1953792 512-byte hdwr sectors (1000 MB) [17211134.612000] sda: Write Protect is off [17211134.612000] sda: Mode Sense: 03 00 00 00 [17211134.612000] sda: assuming drive cache: write through [17211134.624000] SCSI device sda: 1953792 512-byte hdwr sectors (1000 MB) [17211134.628000] sda: Write Protect is off [17211134.628000] sda: Mode Sense: 03 00 00 00 [17211134.628000] sda: assuming drive cache: write through [17211134.628000] sda: sda1 [17211165.216000] usb 3-1: reset full speed USB device using uhci_hcd and address 2 [17211165.464000] usb 3-1: reset full speed USB device using uhci_hcd and address 2 [17211165.712000] usb 3-1: reset full speed USB device using uhci_hcd and address 2 [17211165.960000] usb 3-1: reset full speed USB device using uhci_hcd and address 2 [17211166.092000] sd 0:0:0:0: scsi: Device offlined - not ready after error recovery [17211166.092000] sd 0:0:0:0: SCSI error: return code = 0x50000 [17211166.092000] end_request: I/O error, dev sda, sector 1953785 [17211166.092000] Buffer I/O error on device sda1, logical block 1953656 [17211166.092000] sd 0:0:0:0: rejecting I/O to offline device [17211166.092000] Buffer I/O error on device sda1, logical block 1953657 [17211166.092000] Buffer I/O error on device sda1, logical block 1953658 [17211166.092000] Buffer I/O error on device sda1, logical block 1953659 [17211166.092000] Buffer I/O error on device sda1, logical block 1953660 [17211166.092000] Buffer I/O error on device sda1, logical block 1953661 [17211166.092000] Buffer I/O error on device sda1, logical block 1953662 [17211166.092000] sd 0:0:0:0: rejecting I/O to offline device [17211166.096000] sd 0:0:0:0: rejecting I/O to offline device [17211166.096000] Buffer I/O error on device sda1, logical block 1953656 [17211166.096000] Buffer I/O error on device sda1, logical block 1953657 [17211166.096000] Buffer I/O error on device sda1, logical block 1953658 [17211166.096000] sd 0:0:0:0: rejecting I/O to offline device [17211166.100000] sd 0:0:0:0: rejecting I/O to offline device [17211166.100000] sd 0:0:0:0: rejecting I/O to offline device [17211166.100000] sd 0:0:0:0: rejecting I/O to offline device [17211166.100000] sd 0:0:0:0: rejecting I/O to offline device [17211166.100000] sd 0:0:0:0: rejecting I/O to offline device [17211166.100000] sd 0:0:0:0: rejecting I/O to offline device [17211166.100000] sd 0:0:0:0: rejecting I/O to offline device [17211166.100000] sd 0:0:0:0: rejecting I/O to offline device [17211166.100000] sd 0:0:0:0: rejecting I/O to offline device [17211166.100000] sd 0:0:0:0: rejecting I/O to offline device [17211166.100000] sd 0:0:0:0: rejecting I/O to offline device [17211166.100000] sd 0:0:0:0: rejecting I/O to offline device [17211166.100000] sd 0:0:0:0: rejecting I/O to offline device [17211166.100000] sd 0:0:0:0: rejecting I/O to offline device [17211166.100000] sd 0:0:0:0: rejecting I/O to offline device [17211166.100000] sd 0:0:0:0: rejecting I/O to offline device [17211166.100000] sd 0:0:0:0: rejecting I/O to offline device [17211166.100000] sd 0:0:0:0: rejecting I/O to offline device [17211166.100000] sd 0:0:0:0: rejecting I/O to offline device [17211166.100000] sd 0:0:0:0: rejecting I/O to offline device [17211166.100000] sd 0:0:0:0: rejecting I/O to offline device [17211166.100000] sd 0:0:0:0: rejecting I/O to offline device [17211166.100000] sd 0:0:0:0: rejecting I/O to offline device [17211166.100000] sd 0:0:0:0: rejecting I/O to offline device [17211166.100000] sd 0:0:0:0: rejecting I/O to offline device [17211166.100000] sd 0:0:0:0: rejecting I/O to offline device [17211166.100000] sd 0:0:0:0: rejecting I/O to offline device [17211166.100000] sd 0:0:0:0: rejecting I/O to offline device [17211166.100000] sd 0:0:0:0: rejecting I/O to offline device [17211166.100000] sd 0:0:0:0: rejecting I/O to offline device [17211166.100000] sd 0:0:0:0: rejecting I/O to offline device [17211166.100000] sd 0:0:0:0: rejecting I/O to offline device [17211166.100000] sd 0:0:0:0: rejecting I/O to offline device [17211166.100000] sd 0:0:0:0: rejecting I/O to offline device [17211166.100000] sd 0:0:0:0: rejecting I/O to offline device lsusb -vv Bus 004 Device 002: ID 04b4:6560 Cypress Semiconductor Corp. CY7C65640 USB-2.0 "TetraHub" Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 2 TT per port bMaxPacketSize0 64 idVendor 0x04b4 Cypress Semiconductor Corp. idProduct 0x6560 CY7C65640 USB-2.0 "TetraHub" bcdDevice 0.09 iManufacturer 0 iProduct 0 iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 41 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 100mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused bInterfaceProtocol 1 Single TT iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0001 1x 1 bytes bInterval 12 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 1 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused bInterfaceProtocol 2 TT per port iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0001 1x 1 bytes bInterval 12 Hub Descriptor: bLength 9 bDescriptorType 41 nNbrPorts 4 wHubCharacteristic 0x0089 Per-port power switching Per-port overcurrent protection TT think time 8 FS bits Port indicators bPwrOn2PwrGood 50 * 2 milli seconds bHubContrCurrent 100 milli Ampere DeviceRemovable 0x58 PortPwrCtrlMask 0xc0 Hub Port Status: Port 1: 0000.0100 power Port 2: 0000.0100 power Port 3: 0000.0100 power Port 4: 0000.0100 power Device Qualifier (for other device speed): bLength 10 bDescriptorType 6 bcdUSB 2.00 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 0 bMaxPacketSize0 64 bNumConfigurations 1 Device Status: 0x0001 Self Powered Bus 004 Device 001: ID 0000:0000 Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 1 Single TT bMaxPacketSize0 64 idVendor 0x0000 idProduct 0x0000 bcdDevice 2.06 iManufacturer 3 Linux 2.6.15-26-686 ehci_hcd iProduct 2 EHCI Host Controller iSerial 1 0000:00:10.3 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xc0 Self Powered MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0002 1x 2 bytes bInterval 12 Hub Descriptor: bLength 9 bDescriptorType 41 nNbrPorts 6 wHubCharacteristic 0x000a No power switching (usb 1.0) Per-port overcurrent protection TT think time 8 FS bits bPwrOn2PwrGood 10 * 2 milli seconds bHubContrCurrent 0 milli Ampere DeviceRemovable 0x48 PortPwrCtrlMask 0xc0 Hub Port Status: Port 1: 0000.0503 highspeed power enable connect Port 2: 0000.0100 power Port 3: 0000.0100 power Port 4: 0000.0100 power Port 5: 0000.0000 Port 6: 0000.0100 power Device Status: 0x0001 Self Powered Bus 001 Device 001: ID 0000:0000 Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x0000 idProduct 0x0000 bcdDevice 2.06 iManufacturer 3 Linux 2.6.15-26-686 uhci_hcd iProduct 2 UHCI Host Controller iSerial 1 0000:00:10.0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0002 1x 2 bytes bInterval 255 Hub Descriptor: bLength 9 bDescriptorType 41 nNbrPorts 2 wHubCharacteristic 0x000a No power switching (usb 1.0) Per-port overcurrent protection bPwrOn2PwrGood 1 * 2 milli seconds bHubContrCurrent 0 milli Ampere DeviceRemovable 0x08 PortPwrCtrlMask 0x82 Hub Port Status: Port 1: 0000.0100 power Port 2: 0000.0100 power Device Status: 0x0003 Self Powered Remote Wakeup Enabled Bus 003 Device 002: ID 0483:0321 SGS Thomson Microelectronics Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 16 idVendor 0x0483 SGS Thomson Microelectronics idProduct 0x0321 bcdDevice 1.92 iManufacturer 1 Generic iProduct 2 USB Mass Storage Device iSerial 3 7777777777777777 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 32 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0x80 (Bus Powered) MaxPower 100mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 8 Mass Storage bInterfaceSubClass 6 SCSI bInterfaceProtocol 80 Bulk (Zip) iInterface 4 4in1 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Device Status: 0x0000 (Bus Powered) Bus 003 Device 001: ID 0000:0000 Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x0000 idProduct 0x0000 bcdDevice 2.06 iManufacturer 3 Linux 2.6.15-26-686 uhci_hcd iProduct 2 UHCI Host Controller iSerial 1 0000:00:10.2 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0002 1x 2 bytes bInterval 255 Hub Descriptor: bLength 9 bDescriptorType 41 nNbrPorts 2 wHubCharacteristic 0x000a No power switching (usb 1.0) Per-port overcurrent protection bPwrOn2PwrGood 1 * 2 milli seconds bHubContrCurrent 0 milli Ampere DeviceRemovable 0x78 PortPwrCtrlMask 0x01 Hub Port Status: Port 1: 0000.0103 power enable connect Port 2: 0000.0300 lowspeed power Device Status: 0x0003 Self Powered Remote Wakeup Enabled Bus 002 Device 001: ID 0000:0000 Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x0000 idProduct 0x0000 bcdDevice 2.06 iManufacturer 3 Linux 2.6.15-26-686 uhci_hcd iProduct 2 UHCI Host Controller iSerial 1 0000:00:10.1 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0002 1x 2 bytes bInterval 255 Hub Descriptor: bLength 9 bDescriptorType 41 nNbrPorts 2 wHubCharacteristic 0x000a No power switching (usb 1.0) Per-port overcurrent protection bPwrOn2PwrGood 1 * 2 milli seconds bHubContrCurrent 0 milli Ampere DeviceRemovable 0xf0 PortPwrCtrlMask 0x01 Hub Port Status: Port 1: 0000.0300 lowspeed power Port 2: 0000.0300 lowspeed power Device Status: 0x0003 Self Powered Remote Wakeup Enabled lspci -vv 0000:00:00.0 Host bridge: VIA Technologies, Inc. VT8385 [K8T800 AGP] Host Bridge (rev 01) Subsystem: VIA Technologies, Inc. VT8385 [K8T800 AGP] Host Bridge Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- Reset- FastB2B- Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 0000:00:07.0 CardBus bridge: Texas Instruments PCI4510 PC card Cardbus Controller (rev 02) Subsystem: Acer Incorporated [ALI]: Unknown device 0057 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- Reset+ 16bInt+ PostWrite+ 16-bit legacy interface ports at 0001 0000:00:07.1 FireWire (IEEE 1394): Texas Instruments PCI4510 IEEE-1394 Controller (prog-if 10 [OHCI]) Subsystem: Acer Incorporated [ALI]: Unknown device 0057 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- Message-ID: <20060917211057.28890.22428.malone@gangotri.ubuntu.com> "sudo modprobe ndiswrapper" also gives me "FATAL: Error inserting ndiswrapper (/lib/modules/2.6.17-7-generic/kernel/drivers/net/ndiswrapper/ndiswrapper.ko): Invalid argument" -- ndiswrapper in edgy broken https://launchpad.net/bugs/59983 From zzking at free.fr Sun Sep 17 21:36:43 2006 From: zzking at free.fr (gerard) Date: Sun, 17 Sep 2006 21:36:43 -0000 Subject: [Bug 47489] Re: today's update (May 30) blocked my laptop References: <20060530130738.2224.52062.malonedeb@gangotri.ubuntu.com> Message-ID: <20060917213644.28941.31519.malone@gandwana.ubuntu.com> Hi, I'm really desperate that nobody takes care of this bug that many people w/ a laptop are coping with. I've tried again w/ the latest update, 2 or 3 days ago, (today is sept. 17th) of 2.6.15-26-386, but still the same: after the splash, when I switch to identification, the screen is frozen and the mouse inactive, so I came back one more time to 2.6.15-20-386. I'm surprised nobody from Ubuntu seems interested (apart from people like me who also raised the bug). No reply!! If you want to penetrate large companies, you'd better solve this first because no IT manager will accept to deploy an OS w/ such a big bug on Sata laptops. It's up to you. Thx for your help -- today's update (May 30) blocked my laptop https://launchpad.net/bugs/47489 From burner at suppressingfire.org Sun Sep 17 22:22:55 2006 From: burner at suppressingfire.org (Michael R. Head) Date: Sun, 17 Sep 2006 22:22:55 -0000 Subject: [Bug 43194] Re: [dapper regression] orinoco_cs PCMCIA wireless card no longer hotplugs with Thinkpad T22 References: <20060506081353.20638.82317.malonedeb@gangotri.ubuntu.com> Message-ID: <20060917222255.28823.49867.malone@gangotri.ubuntu.com> I can no longer reproduce this with either the latest or any earlier kernels anymore. Perhaps an update to another package resolved this? Anyway, it means I can now bring my sister's T22 up to Dapper, too. w00t! ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Unconfirmed => Fix Released -- [dapper regression] orinoco_cs PCMCIA wireless card no longer hotplugs with Thinkpad T22 https://launchpad.net/bugs/43194 From derrygeuther at wanadoo.nl Sun Sep 17 23:15:03 2006 From: derrygeuther at wanadoo.nl (Derry Geuther) Date: Sun, 17 Sep 2006 23:15:03 -0000 Subject: [Bug 38219] Re: Gnome freezes after log in References: <20060405162101.24486.32586.malonedeb@gangotri.ubuntu.com> Message-ID: <20060917231503.28823.87718.malone@gangotri.ubuntu.com> My apologies for not responding before. Being new to Linux, I am kinda afraid I might be just saying something stupid and wasting your time. Anyway, I found out the problem is related to my MSI-K8TM mobo (Via- based chipset). As I understand there will be a Quirk-MSI-K8T kernelpatch for Dapper to solve the problem. However, I still wonder: if it is a mere sound problem, how come the problem only occurs when trying to run #init 2 (the default Ubuntu- runlevel)? Whereas running runlevels 3-5 (which all use the same initscripts, but other than runlevel_2's) give no (sound)problem. Comparing /etc/rc*.d, I notice rc2.d contains powernowd.early and stop- readahead scripts, while the other rc's lack them. And as I wrote before, #init 2 makes my machine totally irresponsive after login while the sound hangs (no keys-combinations work), so i have to push the reboot-button. The same actually happened when I tried to install Ubuntu with the Live-CD. With Knoppix on the other hand I've never had any problem to start. Is it correct that powernowd.early is a specifical Ubuntu initscript? I'm only wildguessing here, but could my machine have issue with powernowd.early? At the moment I'm trying Edgy Eft Knot3_amd64 on an other partition. I've no problem starting runlevel 2. Is it due to the Quirk-MSI kernelpatch? Or is it something else that fixes the problem (e.g. Upstart...)? I don't know. The following is what I get from #dmesg ...snip [ 18.799654] PCI: Probing PCI hardware (bus 00) [ 18.801904] PCI: Ignoring BAR0-3 of IDE controller 0000:00:0f.1 [ 18.802176] PCI: Quirk-MSI-K8T Soundcard On [ 18.802178] PCI: Unexpected Value in PCI-Register: no Change! snip... I do have problem though with Edgy ;-). It wont reboot or halt my machine!! But that's ofcourse a different bug. -- Gnome freezes after log in https://launchpad.net/bugs/38219 From tyche at cox.net Mon Sep 18 01:33:44 2006 From: tyche at cox.net (Craig A. Eddy) Date: Mon, 18 Sep 2006 01:33:44 -0000 Subject: [Bug 60987] Loss of sound devices (/dev/dsp /dev/mixer /dev/sequencer /dev/midi) References: <20060918013344.28762.54191.malonedeb@gandwana.ubuntu.com> Message-ID: <20060918013344.28762.54191.malonedeb@gandwana.ubuntu.com> Public bug reported: Binary package hint: linux-image-2.6.15-23-386 HARDWARE - Tyan mother board Pentium PIII, 750 CPU Creative Labs SoundBlaster Live! (driver - emu10k1) PROBLEM - (Symptoms positive and negative) Sound not operating. Alsa mixer and Gnome mixer both reporting that there is no sound device installed. No modules apparently installed. SOLUTION - Went to the Alsa web site, found my particular sound card, downloaded 3 packages and followed the directions on the page INCLUDING running ./snddevices. ReBoot. Sound now operating. CONCLUSION - The Ubuntu alsa packages, when installed, are not completing the operation of installing the sound devices (/dev/dsp /dev/mixer /dev/sequencer /dev/midi). This is fatal to the operation of sound on a GNU/Linux system. This is a particularly obnoxious problem considering that the sound was operating prior to the upgrade to this particular kernel (this also occurred on a clean install on a separate partition). Which particular package was responsible for the lack of sound devices I have no way of determining. However, since ./snddevices would not operate/could not be found until AFTER I had done ./compile ./make ./make install on the three packages, I have to conclude that something in the packages that Synaptic offered was lacking the appropriate programs/functions. TO REPRODUCE - On the above hardware, update to linux-image-2.6.15-23-386. Sound that had been working satisfactorily PRIOR TO update suddenly no longer exists. COMMENT - This is the second time that an updated image has destroyed the sound on my computer. I would have thought that, after the first time, it would have been fixed. ** Affects: linux-source-2.6.15 (Ubuntu) Importance: Untriaged Status: Unconfirmed -- Loss of sound devices (/dev/dsp /dev/mixer /dev/sequencer /dev/midi) https://launchpad.net/bugs/60987 From psientist at gmail.com Mon Sep 18 01:32:12 2006 From: psientist at gmail.com (discord) Date: Mon, 18 Sep 2006 01:32:12 -0000 Subject: [Bug 59983] Re: [Bug 59983] Re: ndiswrapper in edgy broken References: <20060911235728.16647.6163.malonedeb@gangotri.ubuntu.com> <20060917211057.28890.22428.malone@gangotri.ubuntu.com> Message-ID: did you try the possible solutioin. I have it working on my laptop. On 9/17/06, Brynjar Harðarson wrote: > > "sudo modprobe ndiswrapper" also gives me > "FATAL: Error inserting ndiswrapper > (/lib/modules/2.6.17-7-generic/kernel/drivers/net/ndiswrapper/ndiswrapper.ko): > Invalid argument" > > -- > ndiswrapper in edgy broken > https://launchpad.net/bugs/59983 > -- ndiswrapper in edgy broken https://launchpad.net/bugs/59983 From pd at cipherfunk.org Mon Sep 18 01:51:10 2006 From: pd at cipherfunk.org (Paul Drain) Date: Mon, 18 Sep 2006 01:51:10 -0000 Subject: [Bug 36596] Re: system freeze after clicking task manager trash icon in "pan" newsreader References: <20060325145711.6279.38615.malonedeb@gandwana.ubuntu.com> Message-ID: <20060918015110.28941.66586.malone@gandwana.ubuntu.com> Incase anyone didn't get it from the website before it went down, i'm attaching the original, mostly-working .diff.gz files for the kernel and xorg. Hopefully these can be upstreamed shortly. ** Attachment added: "The xorg ATI driver changes" http://librarian.launchpad.net/4292278/xserver-xorg-driver-ati_6.5.7.3-0unofficialubuntu2.diff.gz -- system freeze after clicking task manager trash icon in "pan" newsreader https://launchpad.net/bugs/36596 From pd at cipherfunk.org Mon Sep 18 02:18:03 2006 From: pd at cipherfunk.org (Paul Drain) Date: Mon, 18 Sep 2006 02:18:03 -0000 Subject: [Bug 36596] Re: system freeze after clicking task manager trash icon in "pan" newsreader References: <20060325145711.6279.38615.malonedeb@gandwana.ubuntu.com> Message-ID: <20060918021804.28941.49495.malone@gandwana.ubuntu.com> This was built against the last dapper-security kernel, but the changes are fairly obvious. ** Attachment added: "and the kernel changes" http://librarian.launchpad.net/4292284/linux-source-2.6.15_2.6.15-26.46.1.diff.gz -- system freeze after clicking task manager trash icon in "pan" newsreader https://launchpad.net/bugs/36596 From burner at suppressingfire.org Mon Sep 18 02:37:38 2006 From: burner at suppressingfire.org (Michael R. Head) Date: Mon, 18 Sep 2006 02:37:38 -0000 Subject: [Bug 36596] Re: system freeze after clicking task manager trash icon in "pan" newsreader References: <20060325145711.6279.38615.malonedeb@gandwana.ubuntu.com> Message-ID: <20060918023739.28941.94589.malone@gandwana.ubuntu.com> Hey Paul, thanks a bunch! mike -- system freeze after clicking task manager trash icon in "pan" newsreader https://launchpad.net/bugs/36596 From owenstickley at internode.on.net Mon Sep 18 02:45:04 2006 From: owenstickley at internode.on.net (Owen Stickley) Date: Mon, 18 Sep 2006 02:45:04 -0000 Subject: [Bug 30766] Re: [acx111] default firmware not working for acx d-link dwl-g650+ References: <20060207221213.32736.87495.malonedeb@gandwana.ubuntu.com> Message-ID: <20060918024504.28762.31863.malone@gandwana.ubuntu.com> Would just like to confirm this bug. It's "easily enough" fixed by performing the instructions here: http://acx100.sourceforge.net/wiki/Distribution_list/Ubuntu I wonder why it hasn't been fixed yet? :( -- [acx111] default firmware not working for acx d-link dwl-g650+ https://launchpad.net/bugs/30766 From alpeterson at gmail.com Mon Sep 18 05:13:55 2006 From: alpeterson at gmail.com (AaronPeterson) Date: Mon, 18 Sep 2006 05:13:55 -0000 Subject: [Bug 60999] /lib/firmware/acx/2.6.15-26-386/acx/default wrong References: <20060918051356.28890.41849.malonedeb@gangotri.ubuntu.com> Message-ID: <20060918051356.28890.41849.malonedeb@gangotri.ubuntu.com> Public bug reported: Binary package hint: linux-image-2.6.15-26-386 a symlink in /lib/firmware/acx/2.6.15-26-386/acx/default is wrong. tiacx111c16 -> ../1.2.1.34/tiacx111c16 instead of tiacx111c16 -> ../2.3.1.31/tiacx111c16 This makes a specific version of the Dlink DWL-G630 wireless card work --- some dmesg of it working --- [17181824.816000] acx: found ACX111-based wireless network card at 0000:06:00.0, irq:11, phymem1:0x36020000, phymem2:0x36000000, mem1:0xe0bb4000, mem1_size:8192, mem2:0xe0c80000, mem2_size:131072 [17181825.688000] acx: form factor 0x01 ((mini-)PCI / CardBus), radio type 0x16 (Radia), EEPROM version 0x05, uploaded firmware 'Rev 1.2.1.34' (0x03010101) [17181825.688000] acx v0.3.21: net device wlan0, driver compiled against wireless extensions 19 and Linux 2.6.15-26-386 [17181825.688000] usbcore: registered new driver acx_usb [17181825.716000] wlan0 (WE) : Driver using old /proc/net/wireless support, please fix driver ! [17181826.128000] ADDRCONF(NETDEV_UP): wlan0: link is not ready [17181828.808000] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [17181829.112000] wlan0: duplicate address detected! ** Affects: linux-source-2.6.15 (Ubuntu) Importance: Untriaged Status: Unconfirmed -- /lib/firmware/acx/2.6.15-26-386/acx/default wrong https://launchpad.net/bugs/60999 From mmeija at tripleblack.net Mon Sep 18 06:43:02 2006 From: mmeija at tripleblack.net (MMeija) Date: Mon, 18 Sep 2006 06:43:02 -0000 Subject: [Bug 60963] Re: SGS Thomson 5in1 card reader not mounting sd References: <20060917205207.28762.71590.malonedeb@gandwana.ubuntu.com> Message-ID: <20060918064302.28762.82822.malone@gandwana.ubuntu.com> ** Description changed: Binary package hint: linux-source-2.6.15 i'm not able to use my sd-flash reader in ubuntu; other operating systems handle it well hasn't worked in dapper.. i can't recall if i tried breezy i put an sd card in, the card reader light will light up for a bit and then turn off; i suppose this is an obscure device.. laptop is an acer ferrari 3400 thanks for your time Linux ferrari 2.6.15-26-686 #1 SMP PREEMPT Fri Sep 8 20:16:40 UTC 2006 i686 GNU/Linux - - root at ferrari:~# lsusb - Bus 004 Device 002: ID 04b4:6560 Cypress Semiconductor Corp. CY7C65640 USB-2.0 "TetraHub" - Bus 004 Device 001: ID 0000:0000 - Bus 001 Device 001: ID 0000:0000 - Bus 003 Device 002: ID 0483:0321 SGS Thomson Microelectronics - Bus 003 Device 001: ID 0000:0000 - Bus 002 Device 001: ID 0000:0000 - - dmesg: - [17179569.184000] Linux version 2.6.15-26-686 (buildd at terranova) (gcc version 4.0.3 (Ubuntu 4.0.3-1ubuntu5)) #1 SMP PREEMPT Fri Sep 8 20:16:40 UTC 2006 - [17179569.184000] BIOS-provided physical RAM map: - [17179569.184000] BIOS-e820: 0000000000000000 - 000000000009b800 (usable) - [17179569.184000] BIOS-e820: 000000000009b800 - 00000000000a0000 (reserved) - [17179569.184000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) - [17179569.184000] BIOS-e820: 0000000000100000 - 000000001fef0000 (usable) - [17179569.184000] BIOS-e820: 000000001fef0000 - 000000001fefa000 (ACPI data) - [17179569.184000] BIOS-e820: 000000001fefa000 - 000000001ff00000 (ACPI NVS) - [17179569.184000] BIOS-e820: 000000001ff00000 - 0000000020000000 (reserved) - [17179569.184000] BIOS-e820: 00000000fffe0000 - 0000000100000000 (reserved) - [17179569.184000] 0MB HIGHMEM available. - [17179569.184000] 510MB LOWMEM available. - [17179569.184000] found SMP MP-table at 000f68f0 - [17179569.184000] On node 0 totalpages: 130800 - [17179569.184000] DMA zone: 4096 pages, LIFO batch:0 - [17179569.184000] DMA32 zone: 0 pages, LIFO batch:0 - [17179569.184000] Normal zone: 126704 pages, LIFO batch:31 - [17179569.184000] HighMem zone: 0 pages, LIFO batch:0 - [17179569.184000] DMI 2.3 present. - [17179569.184000] ACPI: RSDP (v000 PTLTD ) @ 0x000f6950 - [17179569.184000] ACPI: RSDT (v001 PTLTD RSDT 0x06040000 LTP 0x00000000) @ 0x1fef43e3 - [17179569.184000] ACPI: FADT (v001 AMDK8 PTLTW 0x06040000 PTL_ 0x000f4240) @ 0x1fef9e1d - [17179569.184000] ACPI: SSDT (v001 PTLTD POWERNOW 0x06040000 LTP 0x00000001) @ 0x1fef9e91 - [17179569.184000] ACPI: MADT (v001 PTLTD APIC 0x06040000 LTP 0x00000000) @ 0x1fef9f88 - [17179569.184000] ACPI: BOOT (v001 PTLTD $SBFTBL$ 0x06040000 LTP 0x00000001) @ 0x1fef9fd8 - [17179569.184000] ACPI: DSDT (v001 VIA PTL_ACPI 0x06040000 MSFT 0x0100000e) @ 0x00000000 - [17179569.184000] ACPI: PM-Timer IO Port: 0x4008 - [17179569.184000] ACPI: Local APIC address 0xfee00000 - [17179569.184000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) - [17179569.184000] Processor #0 15:12 APIC version 16 - [17179569.184000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) - [17179569.184000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) - [17179569.184000] IOAPIC[0]: apic_id 1, version 3, address 0xfec00000, GSI 0-23 - [17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) - [17179569.184000] ACPI: IRQ0 used by override. - [17179569.184000] ACPI: IRQ2 used by override. - [17179569.184000] ACPI: IRQ10 used by override. - [17179569.184000] Enabling APIC mode: Flat. Using 1 I/O APICs - [17179569.184000] Using ACPI (MADT) for SMP configuration information - [17179569.184000] Allocating PCI resources starting at 30000000 (gap: 20000000:dffe0000) - [17179569.184000] Built 1 zonelists - [17179569.184000] Kernel command line: root=/dev/hda1 ro quiet splash - [17179569.184000] mapped APIC to ffffd000 (fee00000) - [17179569.184000] mapped IOAPIC to ffffc000 (fec00000) - [17179569.184000] Initializing CPU#0 - [17179569.184000] PID hash table entries: 2048 (order: 11, 32768 bytes) - [17179569.184000] Detected 2004.831 MHz processor. - [17179569.184000] Using pmtmr for high-res timesource - [17179569.184000] Console: colour VGA+ 80x25 - [17179569.524000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) - [17179569.524000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) - [17179569.532000] Memory: 506968k/523200k available (2115k kernel code, 15576k reserved, 595k data, 332k init, 0k highmem) - [17179569.532000] Checking if this processor honours the WP bit even in supervisor mode... Ok. - [17179569.612000] Calibrating delay using timer specific routine.. 4014.07 BogoMIPS (lpj=8028149) - [17179569.612000] Security Framework v1.0.0 initialized - [17179569.612000] SELinux: Disabled at boot. - [17179569.612000] Mount-cache hash table entries: 512 - [17179569.612000] CPU: After generic identify, caps: 078bfbff e3d3fbff 00000000 00000000 00000000 00000000 00000000 - [17179569.612000] CPU: After vendor identify, caps: 078bfbff e3d3fbff 00000000 00000000 00000000 00000000 00000000 - [17179569.612000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) - [17179569.612000] CPU: L2 Cache: 512K (64 bytes/line) - [17179569.612000] CPU: After all inits, caps: 078bfbff e3d3fbff 00000000 00000410 00000000 00000000 00000000 - [17179569.612000] mtrr: v2.0 (20020519) - [17179569.612000] Enabling fast FPU save and restore... done. - [17179569.612000] Enabling unmasked SIMD FPU exception support... done. - [17179569.612000] Checking 'hlt' instruction... OK. - [17179569.628000] SMP alternatives: switching to UP code - [17179569.628000] checking if image is initramfs... it is - [17179570.136000] Freeing initrd memory: 6809k freed - [17179570.144000] ACPI: Looking for DSDT ... not found! - [17179570.148000] CPU0: AMD Mobile AMD Athlon 64 Processor 3000+ stepping 00 - [17179570.148000] Total of 1 processors activated (4014.07 BogoMIPS). - [17179570.148000] ENABLING IO-APIC IRQs - [17179570.148000] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 - [17179570.292000] Brought up 1 CPUs - [17179570.292000] NET: Registered protocol family 16 - [17179570.292000] EISA bus registered - [17179570.292000] ACPI: bus type pci registered - [17179570.292000] PCI: PCI BIOS revision 2.10 entry at 0xfd64c, last bus=1 - [17179570.292000] PCI: Using configuration type 1 - [17179570.292000] ACPI: Subsystem revision 20051216 - [17179570.292000] ACPI: Interpreter enabled - [17179570.292000] ACPI: Using IOAPIC for interrupt routing - [17179570.292000] ACPI: PCI Root Bridge [PCI0] (0000:00) - [17179570.292000] PCI: Probing PCI hardware (bus 00) - [17179570.296000] PCI quirk: region 4000-407f claimed by vt8235 PM - [17179570.296000] PCI quirk: region 8100-810f claimed by vt8235 SMB - [17179570.296000] Boot video device is 0000:01:00.0 - [17179570.296000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] - [17179570.300000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] - [17179570.300000] ACPI: PCI Interrupt Link [ALKA] (IRQs 16 17 18 19 20 21 22 23) *5, disabled. - [17179570.300000] ACPI: PCI Interrupt Link [ALKB] (IRQs 16 17 18 19 20 21 22 23) *9, disabled. - [17179570.300000] ACPI: PCI Interrupt Link [ALKC] (IRQs 22) *11, disabled. - [17179570.300000] ACPI: PCI Interrupt Link [ALKD] (IRQs 21) *5, disabled. - [17179570.300000] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 7 9 12 14 15) - [17179570.300000] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 12 14 15) *9 - [17179570.300000] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 *11 12 14 15) - [17179570.300000] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 7 9 10 11 12 14 15) - [17179570.300000] ACPI: Embedded Controller [EC0] (gpe 1) interrupt mode. - [17179570.312000] Linux Plug and Play Support v0.97 (c) Adam Belay - [17179570.312000] pnp: PnP ACPI init - [17179570.312000] pnp: PnP ACPI: found 9 devices - [17179570.312000] PnPBIOS: Disabled by ACPI PNP - [17179570.312000] PCI: Using ACPI for IRQ routing - [17179570.312000] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report - [17179570.316000] pnp: 00:05: ioport range 0x600-0x60f has been reserved - [17179570.316000] pnp: 00:05: ioport range 0x4d0-0x4d1 has been reserved - [17179570.316000] pnp: 00:05: ioport range 0xfe10-0xfe11 could not be reserved - [17179570.316000] pnp: 00:05: ioport range 0xfe00-0xfe00 has been reserved - [17179570.316000] PCI: Bridge: 0000:00:01.0 - [17179570.316000] IO window: 2000-2fff - [17179570.316000] MEM window: d0100000-d01fffff - [17179570.316000] PREFETCH window: d8000000-dfffffff - [17179570.316000] PCI: Bus 2, cardbus bridge: 0000:00:07.0 - [17179570.316000] IO window: 00001c00-00001cff - [17179570.316000] IO window: 00003000-000030ff - [17179570.316000] PREFETCH window: 30000000-31ffffff - [17179570.316000] MEM window: 32000000-33ffffff - [17179570.316000] PCI: Setting latency timer of device 0000:00:01.0 to 64 - [17179570.316000] ACPI: PCI Interrupt 0000:00:07.0[A] -> GSI 17 (level, low) -> IRQ 169 - [17179570.316000] PCI: Setting latency timer of device 0000:00:07.0 to 64 - [17179570.316000] Simple Boot Flag at 0x37 set to 0x1 - [17179570.316000] audit: initializing netlink socket (disabled) - [17179570.316000] audit(1158491693.312:1): initialized - [17179570.316000] VFS: Disk quotas dquot_6.5.1 - [17179570.316000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) - [17179570.316000] Initializing Cryptographic API - [17179570.316000] io scheduler noop registered - [17179570.316000] io scheduler anticipatory registered - [17179570.316000] io scheduler deadline registered - [17179570.316000] io scheduler cfq registered - [17179570.316000] isapnp: Scanning for PnP cards... - [17179570.672000] isapnp: No Plug & Play device found - [17179570.684000] Real Time Clock Driver v1.12 - [17179570.684000] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 - [17179570.684000] serio: i8042 AUX port at 0x60,0x64 irq 12 - [17179570.684000] serio: i8042 KBD port at 0x60,0x64 irq 1 - [17179570.684000] Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled - [17179570.688000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize - [17179570.688000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 - [17179570.688000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx - [17179570.688000] mice: PS/2 mouse device common for all mice - [17179570.688000] EISA: Probing bus 0 at eisa.0 - [17179570.688000] Cannot allocate resource for EISA slot 1 - [17179570.688000] Cannot allocate resource for EISA slot 2 - [17179570.688000] Cannot allocate resource for EISA slot 3 - [17179570.688000] Cannot allocate resource for EISA slot 4 - [17179570.688000] EISA: Detected 0 cards. - [17179570.688000] NET: Registered protocol family 2 - [17179570.724000] IP route cache hash table entries: 4096 (order: 2, 16384 bytes) - [17179570.724000] TCP established hash table entries: 16384 (order: 5, 196608 bytes) - [17179570.724000] TCP bind hash table entries: 16384 (order: 5, 196608 bytes) - [17179570.724000] TCP: Hash tables configured (established 16384 bind 16384) - [17179570.724000] TCP reno registered - [17179570.724000] TCP bic registered - [17179570.724000] NET: Registered protocol family 1 - [17179570.724000] NET: Registered protocol family 8 - [17179570.724000] NET: Registered protocol family 20 - [17179570.724000] Using IPI No-Shortcut mode - [17179570.724000] ACPI wakeup devices: - [17179570.724000] PCI0 USB1 USB2 USB3 GIGA Z000 - [17179570.724000] ACPI: (supports S0 S3 S4 S5) - [17179570.724000] Freeing unused kernel memory: 332k freed - [17179570.728000] input: AT Translated Set 2 keyboard as /class/input/input0 - [17179570.760000] vga16fb: initializing - [17179570.760000] vga16fb: mapped to 0xc00a0000 - [17179570.864000] Console: switching to colour frame buffer device 80x25 - [17179570.864000] fb0: VGA16 VGA frame buffer device - [17179571.932000] Capability LSM initialized - [17179572.060000] ACPI: CPU0 (power states: C1[C1] C2[C2]) - [17179572.064000] ACPI: Thermal Zone [THRM] (47 C) - [17179572.480000] VP_IDE: IDE controller at PCI slot 0000:00:11.1 - [17179572.480000] ACPI: PCI Interrupt 0000:00:11.1[A]: no GSI - [17179572.480000] VP_IDE: chipset revision 6 - [17179572.480000] VP_IDE: not 100% native mode: will probe irqs later - [17179572.480000] VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci0000:00:11.1 - [17179572.480000] ide0: BM-DMA at 0x1860-0x1867, BIOS settings: hda:DMA, hdb:pio - [17179572.480000] ide1: BM-DMA at 0x1868-0x186f, BIOS settings: hdc:DMA, hdd:pio - [17179572.480000] Probing IDE interface ide0... - [17179572.900000] hda: IC25N080ATMR04-0, ATA DISK drive - [17179573.572000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 - [17179573.596000] Probing IDE interface ide1... - [17179574.460000] hdc: MATSHITADVD-RAM UJ-835S, ATAPI CD/DVD-ROM drive - [17179574.796000] ide1 at 0x170-0x177,0x376 on irq 15 - [17179574.800000] hda: max request size: 1024KiB - [17179574.808000] hda: 156301488 sectors (80026 MB) w/7884KiB Cache, CHS=16383/255/63, UDMA(100) - [17179574.808000] hda: cache flushes supported - [17179574.808000] hda: hda1 hda2 hda3 - [17179574.844000] hdc: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33) - [17179574.844000] Uniform CD-ROM driver Revision: 3.20 - [17179575.236000] ieee1394: Initialized config rom entry `ip1394' - [17179575.244000] usbcore: registered new driver usbfs - [17179575.244000] usbcore: registered new driver hub - [17179575.248000] USB Universal Host Controller Interface driver v2.3 - [17179575.248000] ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 177 - [17179575.248000] PCI: VIA IRQ fixup for 0000:00:10.0, from 0 to 1 - [17179575.248000] uhci_hcd 0000:00:10.0: UHCI Host Controller - [17179575.248000] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1 - [17179575.248000] uhci_hcd 0000:00:10.0: irq 177, io base 0x00001800 - [17179575.248000] hub 1-0:1.0: USB hub found - [17179575.248000] hub 1-0:1.0: 2 ports detected - [17179575.312000] ohci1394: $Rev: 1313 $ Ben Collins - [17179575.312000] ACPI: PCI Interrupt 0000:00:07.1[B] -> GSI 18 (level, low) -> IRQ 185 - [17179575.352000] ACPI: PCI Interrupt 0000:00:10.1[B] -> GSI 21 (level, low) -> IRQ 177 - [17179575.352000] PCI: VIA IRQ fixup for 0000:00:10.1, from 0 to 1 - [17179575.352000] uhci_hcd 0000:00:10.1: UHCI Host Controller - [17179575.352000] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2 - [17179575.352000] uhci_hcd 0000:00:10.1: irq 177, io base 0x00001820 - [17179575.352000] hub 2-0:1.0: USB hub found - [17179575.352000] hub 2-0:1.0: 2 ports detected - [17179575.360000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[185] MMIO=[d0015000-d00157ff] Max Packet=[2048] - [17179575.456000] ACPI: PCI Interrupt 0000:00:10.2[C] -> GSI 21 (level, low) -> IRQ 177 - [17179575.456000] PCI: VIA IRQ fixup for 0000:00:10.2, from 0 to 1 - [17179575.456000] uhci_hcd 0000:00:10.2: UHCI Host Controller - [17179575.456000] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3 - [17179575.456000] uhci_hcd 0000:00:10.2: irq 177, io base 0x00001840 - [17179575.456000] hub 3-0:1.0: USB hub found - [17179575.456000] hub 3-0:1.0: 2 ports detected - [17179575.560000] ACPI: PCI Interrupt 0000:00:10.3[D] -> GSI 21 (level, low) -> IRQ 177 - [17179575.560000] ehci_hcd 0000:00:10.3: EHCI Host Controller - [17179575.560000] ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4 - [17179575.560000] ehci_hcd 0000:00:10.3: irq 177, io mem 0xd0015800 - [17179575.560000] ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 - [17179575.560000] hub 4-0:1.0: USB hub found - [17179575.560000] hub 4-0:1.0: 6 ports detected - [17179575.592000] usb 1-1: new full speed USB device using uhci_hcd and address 2 - [17179575.848000] Attempting manual resume - [17179575.904000] EXT3-fs: INFO: recovery required on readonly filesystem. - [17179575.904000] EXT3-fs: write access will be enabled during recovery. - [17179576.536000] usb 4-1: new high speed USB device using ehci_hcd and address 2 - [17179576.632000] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00c09f00004fe9cf] - [17179576.668000] hub 4-1:1.0: USB hub found - [17179576.668000] hub 4-1:1.0: 4 ports detected - [17179577.312000] usb 3-1: new full speed USB device using uhci_hcd and address 2 - [17179577.464000] SCSI subsystem initialized - [17179577.464000] Initializing USB Mass Storage driver... - [17179577.464000] scsi0 : SCSI emulation for USB Mass Storage devices - [17179577.464000] usb-storage: device found at 2 - [17179577.464000] usb-storage: waiting for device to settle before scanning - [17179577.464000] usbcore: registered new driver usb-storage - [17179577.464000] USB Mass Storage support registered. - [17179577.508000] EXT3-fs: hda1: orphan cleanup on readonly fs - [17179577.508000] kjournald starting. Commit interval 5 seconds - [17179577.556000] ext3_orphan_cleanup: deleting unreferenced inode 2879291 - [17179577.556000] ext3_orphan_cleanup: deleting unreferenced inode 1897467 - [17179577.556000] ext3_orphan_cleanup: deleting unreferenced inode 2878966 - [17179577.588000] ext3_orphan_cleanup: deleting unreferenced inode 2878927 - [17179577.588000] EXT3-fs: hda1: 4 orphan inodes deleted - [17179577.588000] EXT3-fs: recovery complete. - [17179577.948000] EXT3-fs: mounted filesystem with ordered data mode. - [17179582.468000] Vendor: Generic Model: Flash R/W Rev: 2002 - [17179582.468000] Type: Direct-Access ANSI SCSI revision: 02 - [17179582.468000] usb-storage: device scan complete - [17179590.740000] Driver 'sd' needs updating - please use bus_type methods - [17179590.756000] sd 0:0:0:0: Attached scsi removable disk sda - [17179590.764000] sd 0:0:0:0: Attached scsi generic sg0 type 0 - [17179591.980000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 - [17179592.016000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 - [17179592.032000] Linux agpgart interface v0.101 (c) Dave Jones - [17179592.064000] agpgart: Detected AGP bridge 0 - [17179592.076000] agpgart: AGP aperture is 256M @ 0xe0000000 - [17179592.112000] ACPI: PCI Interrupt 0000:00:07.0[A] -> GSI 17 (level, low) -> IRQ 169 - [17179592.112000] Yenta: CardBus bridge found at 0000:00:07.0 [1025:0057] - [17179592.112000] Yenta: Using CSCINT to route CSC interrupts to PCI - [17179592.112000] Yenta: Routing CardBus interrupts to PCI - [17179592.112000] Yenta TI: socket 0000:00:07.0, mfunc 0x007c1b22, devctl 0x44 - [17179592.148000] ieee80211_1_1_13_crypt: registered algorithm 'NULL' - [17179592.168000] ieee80211_1_1_13: 802.11 data/management/control stack, 1.1.13 - [17179592.168000] ieee80211_1_1_13: Copyright (C) 2004-2005 Intel Corporation - [17179592.176000] ieee80211_crypt: registered algorithm 'NULL' - [17179592.176000] ieee80211: 802.11 data/management/control stack, git-1.1.7 - [17179592.176000] ieee80211: Copyright (C) 2004-2005 Intel Corporation - [17179592.344000] Yenta: ISA IRQ mask 0x0af8, PCI irq 169 - [17179592.344000] Socket status: 30000086 - [17179592.572000] tg3.c:v3.47 (Dec 28, 2005) - [17179592.572000] ACPI: PCI Interrupt 0000:00:0b.0[A] -> GSI 17 (level, low) -> IRQ 169 - [17179592.596000] eth0: Tigon3 [partno(BCM95788A50) rev 3003 PHY(5705)] (PCI:33MHz:32-bit) 10/100/1000BaseT Ethernet 00:c0:9f:93:5d:0b - [17179592.596000] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[0] TSOcap[1] - [17179592.596000] eth0: dma_rwctrl[763f0000] - [17179592.648000] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.1.1 - [17179592.648000] ipw2200: Copyright(c) 2003-2006 Intel Corporation - [17179592.648000] Warning: PCI driver ipw2200 has a struct device_driver shutdown method, please update! - [17179592.648000] ACPI: PCI Interrupt 0000:00:09.0[A] -> GSI 19 (level, low) -> IRQ 193 - [17179592.648000] ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection - [17179592.724000] input: PC Speaker as /class/input/input1 - [17179592.860000] Synaptics Touchpad, model: 1, fw: 5.8, id: 0x9d48b1, caps: 0x904713/0x4006 - [17179592.896000] input: SynPS/2 Synaptics TouchPad as /class/input/input2 - [17179593.096000] irda_init() - [17179593.096000] NET: Registered protocol family 23 - [17179593.108000] ipw2200: Detected geography ZZM (11 802.11bg channels, 0 802.11a channels) - [17179593.188000] ts: Compaq touchscreen protocol output - [17179593.416000] cs: IO port probe 0x100-0x3af: clean. - [17179593.416000] cs: IO port probe 0x3e0-0x4ff: clean. - [17179593.420000] cs: IO port probe 0x820-0x8ff: clean. - [17179593.420000] cs: IO port probe 0xc00-0xcf7: clean. - [17179593.420000] cs: IO port probe 0xa00-0xaff: clean. - [17179593.708000] ACPI: PCI Interrupt 0000:00:11.6[C] -> GSI 22 (level, low) -> IRQ 201 - [17179593.716000] PCI: Setting latency timer of device 0000:00:11.6 to 64 - [17179593.740000] ACPI: PCI Interrupt 0000:00:11.5[C] -> GSI 22 (level, low) -> IRQ 201 - [17179593.740000] PCI: Setting latency timer of device 0000:00:11.5 to 64 - [17179594.896000] lp: driver loaded but no devices found - [17179594.924000] sbp2: $Rev: 1306 $ Ben Collins - [17179594.924000] ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1) - [17179594.924000] ieee1394: sbp2: Try serialize_io=0 for better performance - [17179595.308000] EXT3 FS on hda1, internal journal - [17179595.544000] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 - [17179595.544000] md: bitmap version 4.39 - [17179596.140000] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel at redhat.com - [17179597.392000] HFS+-fs: write access to a jounaled filesystem is not supported, use the force option at your own risk, mounting read-only. - [17179598.924000] Adding 524280k swap on /mnt/512Mb.swap. Priority:-1 extents:150 across:536004k - [17179600.292000] ACPI: AC Adapter [ACAD] (on-line) - [17179600.296000] ACPI: Battery Slot [BAT1] (battery present) - [17179600.360000] ACPI: Power Button (FF) [PWRF] - [17179600.360000] ACPI: Power Button (CM) [PWRB] - [17179600.360000] ACPI: Lid Switch [LID] - [17179600.360000] ACPI: Sleep Button (CM) [SLPB] - [17179600.436000] ibm_acpi: ec object not found - [17179600.464000] pcc_acpi: loading... - [17179600.540000] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) - [17179601.044000] powernow-k8: Found 1 AMD Athlon 64 / Opteron processors (version 1.50.4) - [17179601.044000] powernow-k8: 0 : fid 0xc (2000 MHz), vid 0x8 (1350 mV) - [17179601.044000] powernow-k8: 1 : fid 0xa (1800 MHz), vid 0xc (1250 mV) - [17179601.044000] powernow-k8: 2 : fid 0x8 (1600 MHz), vid 0xe (1200 mV) - [17179601.044000] powernow-k8: 3 : fid 0x0 (800 MHz), vid 0x17 (975 mV) - [17179601.044000] cpu_init done, current fid 0xc, vid 0x8 - [17179606.280000] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel. - [17179606.284000] [fglrx] Maximum main memory to use for locked dma buffers: 430 MBytes. - [17179606.284000] [fglrx] module loaded - fglrx 8.25.18 [May 18 2006] on minor 0 - [17179606.412000] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 209 - [17179608.368000] [fglrx:drm_parse_option] *ERROR* "agplock" is not a valid option - [17179608.368000] [fglrx] Maximum main memory to use for locked dma buffers: 430 MBytes. - [17179608.368000] [fglrx] AGP detected, AgpState = 0x1f000a0b (hardware caps of chipset) - [17179608.368000] agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0. - [17179608.368000] agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode - [17179608.368000] agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode - [17179608.368000] [fglrx] AGP enabled, AgpCommand = 0x1f000302 (selected caps) - [17179608.376000] [fglrx] total GART = 268435456 - [17179608.376000] [fglrx] free GART = 252440576 - [17179608.376000] [fglrx] max single GART = 252440576 - [17179608.376000] [fglrx] total LFB = 126169088 - [17179608.376000] [fglrx] free LFB = 114274304 - [17179608.376000] [fglrx] max single LFB = 114274304 - [17179608.376000] [fglrx] total Inv = 0 - [17179608.376000] [fglrx] free Inv = 0 - [17179608.376000] [fglrx] max single Inv = 0 - [17179608.376000] [fglrx] total TIM = 0 - [17179608.492000] ppdev: user-space parallel port driver - [17179608.684000] [fglrx] total GART = 268435456 - [17179608.684000] [fglrx] free GART = 252440576 - [17179608.684000] [fglrx] max single GART = 252440576 - [17179608.684000] [fglrx] total LFB = 126169088 - [17179608.684000] [fglrx] free LFB = 102719488 - [17179608.684000] [fglrx] max single LFB = 102719488 - [17179608.684000] [fglrx] total Inv = 0 - [17179608.684000] [fglrx] free Inv = 0 - [17179608.684000] [fglrx] max single Inv = 0 - [17179608.684000] [fglrx] total TIM = 0 - [17179609.436000] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) - [17179609.436000] apm: overridden by ACPI. - [17179615.364000] tg3: eth0: Link is up at 100 Mbps, full duplex. - [17179615.364000] tg3: eth0: Flow control is off for TX and off for RX. - [17179618.328000] NET: Registered protocol family 17 - [17179619.092000] NET: Registered protocol family 10 - [17179619.092000] lo: Disabled Privacy Extensions - [17179619.092000] IPv6 over IPv4 tunneling driver - [17179619.872000] Bluetooth: Core ver 2.8 - [17179619.872000] NET: Registered protocol family 31 - [17179619.872000] Bluetooth: HCI device and connection manager initialized - [17179619.872000] Bluetooth: HCI socket layer initialized - [17179619.928000] Bluetooth: L2CAP ver 2.8 - [17179619.928000] Bluetooth: L2CAP socket layer initialized - [17179620.108000] Bluetooth: RFCOMM socket layer initialized - [17179620.108000] Bluetooth: RFCOMM TTY layer initialized - [17179620.108000] Bluetooth: RFCOMM ver 1.7 - [17179620.876000] /dev/vmmon[5113]: Module vmmon: registered with major=10 minor=165 - [17179620.876000] /dev/vmmon[5113]: Module vmmon: initialized - [17179621.148000] /dev/vmnet: open called by PID 5139 (vmnet-bridge) - [17179621.148000] /dev/vmnet: hub 0 does not exist, allocating memory. - [17179621.148000] /dev/vmnet: port on hub 0 successfully opened - [17179621.148000] bridge-eth0: enabling the bridge - [17179621.148000] bridge-eth0: up - [17179621.148000] bridge-eth0: already up - [17179621.148000] bridge-eth0: attached - [17179621.172000] /dev/vmnet: open called by PID 5154 (vmnet-netifup) - [17179621.172000] /dev/vmnet: hub 1 does not exist, allocating memory. - [17179621.176000] /dev/vmnet: port on hub 1 successfully opened - [17179621.180000] /dev/vmnet: open called by PID 5155 (vmnet-netifup) - [17179621.180000] /dev/vmnet: hub 8 does not exist, allocating memory. - [17179621.180000] /dev/vmnet: port on hub 8 successfully opened - [17179621.312000] /dev/vmnet: open called by PID 5153 (vmnet-natd) - [17179621.312000] /dev/vmnet: port on hub 8 successfully opened - [17179621.684000] /dev/vmnet: open called by PID 5172 (vmnet-dhcpd) - [17179621.684000] /dev/vmnet: port on hub 8 successfully opened - [17179621.688000] /dev/vmnet: open called by PID 5177 (vmnet-dhcpd) - [17179621.688000] /dev/vmnet: port on hub 1 successfully opened - [17179629.332000] eth1: no IPv6 routers present - [17179631.460000] vmnet8: no IPv6 routers present - [17179631.848000] vmnet1: no IPv6 routers present - [17179632.132000] eth0: no IPv6 routers present - [17211134.608000] SCSI device sda: 1953792 512-byte hdwr sectors (1000 MB) - [17211134.612000] sda: Write Protect is off - [17211134.612000] sda: Mode Sense: 03 00 00 00 - [17211134.612000] sda: assuming drive cache: write through - [17211134.624000] SCSI device sda: 1953792 512-byte hdwr sectors (1000 MB) - [17211134.628000] sda: Write Protect is off - [17211134.628000] sda: Mode Sense: 03 00 00 00 - [17211134.628000] sda: assuming drive cache: write through - [17211134.628000] sda: sda1 - [17211165.216000] usb 3-1: reset full speed USB device using uhci_hcd and address 2 - [17211165.464000] usb 3-1: reset full speed USB device using uhci_hcd and address 2 - [17211165.712000] usb 3-1: reset full speed USB device using uhci_hcd and address 2 - [17211165.960000] usb 3-1: reset full speed USB device using uhci_hcd and address 2 - [17211166.092000] sd 0:0:0:0: scsi: Device offlined - not ready after error recovery - [17211166.092000] sd 0:0:0:0: SCSI error: return code = 0x50000 - [17211166.092000] end_request: I/O error, dev sda, sector 1953785 - [17211166.092000] Buffer I/O error on device sda1, logical block 1953656 - [17211166.092000] sd 0:0:0:0: rejecting I/O to offline device - [17211166.092000] Buffer I/O error on device sda1, logical block 1953657 - [17211166.092000] Buffer I/O error on device sda1, logical block 1953658 - [17211166.092000] Buffer I/O error on device sda1, logical block 1953659 - [17211166.092000] Buffer I/O error on device sda1, logical block 1953660 - [17211166.092000] Buffer I/O error on device sda1, logical block 1953661 - [17211166.092000] Buffer I/O error on device sda1, logical block 1953662 - [17211166.092000] sd 0:0:0:0: rejecting I/O to offline device - [17211166.096000] sd 0:0:0:0: rejecting I/O to offline device - [17211166.096000] Buffer I/O error on device sda1, logical block 1953656 - [17211166.096000] Buffer I/O error on device sda1, logical block 1953657 - [17211166.096000] Buffer I/O error on device sda1, logical block 1953658 - [17211166.096000] sd 0:0:0:0: rejecting I/O to offline device - [17211166.100000] sd 0:0:0:0: rejecting I/O to offline device - [17211166.100000] sd 0:0:0:0: rejecting I/O to offline device - [17211166.100000] sd 0:0:0:0: rejecting I/O to offline device - [17211166.100000] sd 0:0:0:0: rejecting I/O to offline device - [17211166.100000] sd 0:0:0:0: rejecting I/O to offline device - [17211166.100000] sd 0:0:0:0: rejecting I/O to offline device - [17211166.100000] sd 0:0:0:0: rejecting I/O to offline device - [17211166.100000] sd 0:0:0:0: rejecting I/O to offline device - [17211166.100000] sd 0:0:0:0: rejecting I/O to offline device - [17211166.100000] sd 0:0:0:0: rejecting I/O to offline device - [17211166.100000] sd 0:0:0:0: rejecting I/O to offline device - [17211166.100000] sd 0:0:0:0: rejecting I/O to offline device - [17211166.100000] sd 0:0:0:0: rejecting I/O to offline device - [17211166.100000] sd 0:0:0:0: rejecting I/O to offline device - [17211166.100000] sd 0:0:0:0: rejecting I/O to offline device - [17211166.100000] sd 0:0:0:0: rejecting I/O to offline device - [17211166.100000] sd 0:0:0:0: rejecting I/O to offline device - [17211166.100000] sd 0:0:0:0: rejecting I/O to offline device - [17211166.100000] sd 0:0:0:0: rejecting I/O to offline device - [17211166.100000] sd 0:0:0:0: rejecting I/O to offline device - [17211166.100000] sd 0:0:0:0: rejecting I/O to offline device - [17211166.100000] sd 0:0:0:0: rejecting I/O to offline device - [17211166.100000] sd 0:0:0:0: rejecting I/O to offline device - [17211166.100000] sd 0:0:0:0: rejecting I/O to offline device - [17211166.100000] sd 0:0:0:0: rejecting I/O to offline device - [17211166.100000] sd 0:0:0:0: rejecting I/O to offline device - [17211166.100000] sd 0:0:0:0: rejecting I/O to offline device - [17211166.100000] sd 0:0:0:0: rejecting I/O to offline device - [17211166.100000] sd 0:0:0:0: rejecting I/O to offline device - [17211166.100000] sd 0:0:0:0: rejecting I/O to offline device - [17211166.100000] sd 0:0:0:0: rejecting I/O to offline device - [17211166.100000] sd 0:0:0:0: rejecting I/O to offline device - [17211166.100000] sd 0:0:0:0: rejecting I/O to offline device - [17211166.100000] sd 0:0:0:0: rejecting I/O to offline device - [17211166.100000] sd 0:0:0:0: rejecting I/O to offline device - - - lsusb -vv - - Bus 004 Device 002: ID 04b4:6560 Cypress Semiconductor Corp. CY7C65640 USB-2.0 "TetraHub" - Device Descriptor: - bLength 18 - bDescriptorType 1 - bcdUSB 2.00 - bDeviceClass 9 Hub - bDeviceSubClass 0 Unused - bDeviceProtocol 2 TT per port - bMaxPacketSize0 64 - idVendor 0x04b4 Cypress Semiconductor Corp. - idProduct 0x6560 CY7C65640 USB-2.0 "TetraHub" - bcdDevice 0.09 - iManufacturer 0 - iProduct 0 - iSerial 0 - bNumConfigurations 1 - Configuration Descriptor: - bLength 9 - bDescriptorType 2 - wTotalLength 41 - bNumInterfaces 1 - bConfigurationValue 1 - iConfiguration 0 - bmAttributes 0xe0 - Self Powered - Remote Wakeup - MaxPower 100mA - Interface Descriptor: - bLength 9 - bDescriptorType 4 - bInterfaceNumber 0 - bAlternateSetting 0 - bNumEndpoints 1 - bInterfaceClass 9 Hub - bInterfaceSubClass 0 Unused - bInterfaceProtocol 1 Single TT - iInterface 0 - Endpoint Descriptor: - bLength 7 - bDescriptorType 5 - bEndpointAddress 0x81 EP 1 IN - bmAttributes 3 - Transfer Type Interrupt - Synch Type None - Usage Type Data - wMaxPacketSize 0x0001 1x 1 bytes - bInterval 12 - Interface Descriptor: - bLength 9 - bDescriptorType 4 - bInterfaceNumber 0 - bAlternateSetting 1 - bNumEndpoints 1 - bInterfaceClass 9 Hub - bInterfaceSubClass 0 Unused - bInterfaceProtocol 2 TT per port - iInterface 0 - Endpoint Descriptor: - bLength 7 - bDescriptorType 5 - bEndpointAddress 0x81 EP 1 IN - bmAttributes 3 - Transfer Type Interrupt - Synch Type None - Usage Type Data - wMaxPacketSize 0x0001 1x 1 bytes - bInterval 12 - Hub Descriptor: - bLength 9 - bDescriptorType 41 - nNbrPorts 4 - wHubCharacteristic 0x0089 - Per-port power switching - Per-port overcurrent protection - TT think time 8 FS bits - Port indicators - bPwrOn2PwrGood 50 * 2 milli seconds - bHubContrCurrent 100 milli Ampere - DeviceRemovable 0x58 - PortPwrCtrlMask 0xc0 - Hub Port Status: - Port 1: 0000.0100 power - Port 2: 0000.0100 power - Port 3: 0000.0100 power - Port 4: 0000.0100 power - Device Qualifier (for other device speed): - bLength 10 - bDescriptorType 6 - bcdUSB 2.00 - bDeviceClass 9 Hub - bDeviceSubClass 0 Unused - bDeviceProtocol 0 - bMaxPacketSize0 64 - bNumConfigurations 1 - Device Status: 0x0001 - Self Powered - - Bus 004 Device 001: ID 0000:0000 - Device Descriptor: - bLength 18 - bDescriptorType 1 - bcdUSB 2.00 - bDeviceClass 9 Hub - bDeviceSubClass 0 Unused - bDeviceProtocol 1 Single TT - bMaxPacketSize0 64 - idVendor 0x0000 - idProduct 0x0000 - bcdDevice 2.06 - iManufacturer 3 Linux 2.6.15-26-686 ehci_hcd - iProduct 2 EHCI Host Controller - iSerial 1 0000:00:10.3 - bNumConfigurations 1 - Configuration Descriptor: - bLength 9 - bDescriptorType 2 - wTotalLength 25 - bNumInterfaces 1 - bConfigurationValue 1 - iConfiguration 0 - bmAttributes 0xc0 - Self Powered - MaxPower 0mA - Interface Descriptor: - bLength 9 - bDescriptorType 4 - bInterfaceNumber 0 - bAlternateSetting 0 - bNumEndpoints 1 - bInterfaceClass 9 Hub - bInterfaceSubClass 0 Unused - bInterfaceProtocol 0 - iInterface 0 - Endpoint Descriptor: - bLength 7 - bDescriptorType 5 - bEndpointAddress 0x81 EP 1 IN - bmAttributes 3 - Transfer Type Interrupt - Synch Type None - Usage Type Data - wMaxPacketSize 0x0002 1x 2 bytes - bInterval 12 - Hub Descriptor: - bLength 9 - bDescriptorType 41 - nNbrPorts 6 - wHubCharacteristic 0x000a - No power switching (usb 1.0) - Per-port overcurrent protection - TT think time 8 FS bits - bPwrOn2PwrGood 10 * 2 milli seconds - bHubContrCurrent 0 milli Ampere - DeviceRemovable 0x48 - PortPwrCtrlMask 0xc0 - Hub Port Status: - Port 1: 0000.0503 highspeed power enable connect - Port 2: 0000.0100 power - Port 3: 0000.0100 power - Port 4: 0000.0100 power - Port 5: 0000.0000 - Port 6: 0000.0100 power - Device Status: 0x0001 - Self Powered - - Bus 001 Device 001: ID 0000:0000 - Device Descriptor: - bLength 18 - bDescriptorType 1 - bcdUSB 1.10 - bDeviceClass 9 Hub - bDeviceSubClass 0 Unused - bDeviceProtocol 0 - bMaxPacketSize0 64 - idVendor 0x0000 - idProduct 0x0000 - bcdDevice 2.06 - iManufacturer 3 Linux 2.6.15-26-686 uhci_hcd - iProduct 2 UHCI Host Controller - iSerial 1 0000:00:10.0 - bNumConfigurations 1 - Configuration Descriptor: - bLength 9 - bDescriptorType 2 - wTotalLength 25 - bNumInterfaces 1 - bConfigurationValue 1 - iConfiguration 0 - bmAttributes 0xe0 - Self Powered - Remote Wakeup - MaxPower 0mA - Interface Descriptor: - bLength 9 - bDescriptorType 4 - bInterfaceNumber 0 - bAlternateSetting 0 - bNumEndpoints 1 - bInterfaceClass 9 Hub - bInterfaceSubClass 0 Unused - bInterfaceProtocol 0 - iInterface 0 - Endpoint Descriptor: - bLength 7 - bDescriptorType 5 - bEndpointAddress 0x81 EP 1 IN - bmAttributes 3 - Transfer Type Interrupt - Synch Type None - Usage Type Data - wMaxPacketSize 0x0002 1x 2 bytes - bInterval 255 - Hub Descriptor: - bLength 9 - bDescriptorType 41 - nNbrPorts 2 - wHubCharacteristic 0x000a - No power switching (usb 1.0) - Per-port overcurrent protection - bPwrOn2PwrGood 1 * 2 milli seconds - bHubContrCurrent 0 milli Ampere - DeviceRemovable 0x08 - PortPwrCtrlMask 0x82 - Hub Port Status: - Port 1: 0000.0100 power - Port 2: 0000.0100 power - Device Status: 0x0003 - Self Powered - Remote Wakeup Enabled - - Bus 003 Device 002: ID 0483:0321 SGS Thomson Microelectronics - Device Descriptor: - bLength 18 - bDescriptorType 1 - bcdUSB 1.10 - bDeviceClass 0 (Defined at Interface level) - bDeviceSubClass 0 - bDeviceProtocol 0 - bMaxPacketSize0 16 - idVendor 0x0483 SGS Thomson Microelectronics - idProduct 0x0321 - bcdDevice 1.92 - iManufacturer 1 Generic - iProduct 2 USB Mass Storage Device - iSerial 3 7777777777777777 - bNumConfigurations 1 - Configuration Descriptor: - bLength 9 - bDescriptorType 2 - wTotalLength 32 - bNumInterfaces 1 - bConfigurationValue 1 - iConfiguration 0 - bmAttributes 0x80 - (Bus Powered) - MaxPower 100mA - Interface Descriptor: - bLength 9 - bDescriptorType 4 - bInterfaceNumber 0 - bAlternateSetting 0 - bNumEndpoints 2 - bInterfaceClass 8 Mass Storage - bInterfaceSubClass 6 SCSI - bInterfaceProtocol 80 Bulk (Zip) - iInterface 4 4in1 - Endpoint Descriptor: - bLength 7 - bDescriptorType 5 - bEndpointAddress 0x82 EP 2 IN - bmAttributes 2 - Transfer Type Bulk - Synch Type None - Usage Type Data - wMaxPacketSize 0x0040 1x 64 bytes - bInterval 0 - Endpoint Descriptor: - bLength 7 - bDescriptorType 5 - bEndpointAddress 0x02 EP 2 OUT - bmAttributes 2 - Transfer Type Bulk - Synch Type None - Usage Type Data - wMaxPacketSize 0x0040 1x 64 bytes - bInterval 0 - Device Status: 0x0000 - (Bus Powered) - - Bus 003 Device 001: ID 0000:0000 - Device Descriptor: - bLength 18 - bDescriptorType 1 - bcdUSB 1.10 - bDeviceClass 9 Hub - bDeviceSubClass 0 Unused - bDeviceProtocol 0 - bMaxPacketSize0 64 - idVendor 0x0000 - idProduct 0x0000 - bcdDevice 2.06 - iManufacturer 3 Linux 2.6.15-26-686 uhci_hcd - iProduct 2 UHCI Host Controller - iSerial 1 0000:00:10.2 - bNumConfigurations 1 - Configuration Descriptor: - bLength 9 - bDescriptorType 2 - wTotalLength 25 - bNumInterfaces 1 - bConfigurationValue 1 - iConfiguration 0 - bmAttributes 0xe0 - Self Powered - Remote Wakeup - MaxPower 0mA - Interface Descriptor: - bLength 9 - bDescriptorType 4 - bInterfaceNumber 0 - bAlternateSetting 0 - bNumEndpoints 1 - bInterfaceClass 9 Hub - bInterfaceSubClass 0 Unused - bInterfaceProtocol 0 - iInterface 0 - Endpoint Descriptor: - bLength 7 - bDescriptorType 5 - bEndpointAddress 0x81 EP 1 IN - bmAttributes 3 - Transfer Type Interrupt - Synch Type None - Usage Type Data - wMaxPacketSize 0x0002 1x 2 bytes - bInterval 255 - Hub Descriptor: - bLength 9 - bDescriptorType 41 - nNbrPorts 2 - wHubCharacteristic 0x000a - No power switching (usb 1.0) - Per-port overcurrent protection - bPwrOn2PwrGood 1 * 2 milli seconds - bHubContrCurrent 0 milli Ampere - DeviceRemovable 0x78 - PortPwrCtrlMask 0x01 - Hub Port Status: - Port 1: 0000.0103 power enable connect - Port 2: 0000.0300 lowspeed power - Device Status: 0x0003 - Self Powered - Remote Wakeup Enabled - - Bus 002 Device 001: ID 0000:0000 - Device Descriptor: - bLength 18 - bDescriptorType 1 - bcdUSB 1.10 - bDeviceClass 9 Hub - bDeviceSubClass 0 Unused - bDeviceProtocol 0 - bMaxPacketSize0 64 - idVendor 0x0000 - idProduct 0x0000 - bcdDevice 2.06 - iManufacturer 3 Linux 2.6.15-26-686 uhci_hcd - iProduct 2 UHCI Host Controller - iSerial 1 0000:00:10.1 - bNumConfigurations 1 - Configuration Descriptor: - bLength 9 - bDescriptorType 2 - wTotalLength 25 - bNumInterfaces 1 - bConfigurationValue 1 - iConfiguration 0 - bmAttributes 0xe0 - Self Powered - Remote Wakeup - MaxPower 0mA - Interface Descriptor: - bLength 9 - bDescriptorType 4 - bInterfaceNumber 0 - bAlternateSetting 0 - bNumEndpoints 1 - bInterfaceClass 9 Hub - bInterfaceSubClass 0 Unused - bInterfaceProtocol 0 - iInterface 0 - Endpoint Descriptor: - bLength 7 - bDescriptorType 5 - bEndpointAddress 0x81 EP 1 IN - bmAttributes 3 - Transfer Type Interrupt - Synch Type None - Usage Type Data - wMaxPacketSize 0x0002 1x 2 bytes - bInterval 255 - Hub Descriptor: - bLength 9 - bDescriptorType 41 - nNbrPorts 2 - wHubCharacteristic 0x000a - No power switching (usb 1.0) - Per-port overcurrent protection - bPwrOn2PwrGood 1 * 2 milli seconds - bHubContrCurrent 0 milli Ampere - DeviceRemovable 0xf0 - PortPwrCtrlMask 0x01 - Hub Port Status: - Port 1: 0000.0300 lowspeed power - Port 2: 0000.0300 lowspeed power - Device Status: 0x0003 - Self Powered - Remote Wakeup Enabled - - lspci -vv - - 0000:00:00.0 Host bridge: VIA Technologies, Inc. VT8385 [K8T800 AGP] Host Bridge (rev 01) - Subsystem: VIA Technologies, Inc. VT8385 [K8T800 AGP] Host Bridge - Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- - Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- Reset- FastB2B- - Capabilities: [80] Power Management version 2 - Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) - Status: D0 PME-Enable- DSel=0 DScale=0 PME- - - 0000:00:07.0 CardBus bridge: Texas Instruments PCI4510 PC card Cardbus Controller (rev 02) - Subsystem: Acer Incorporated [ALI]: Unknown device 0057 - Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- - Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- Reset+ 16bInt+ PostWrite+ - 16-bit legacy interface ports at 0001 - - 0000:00:07.1 FireWire (IEEE 1394): Texas Instruments PCI4510 IEEE-1394 Controller (prog-if 10 [OHCI]) - Subsystem: Acer Incorporated [ALI]: Unknown device 0057 - Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- - Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- Message-ID: <20060918064343.28890.52961.malone@gangotri.ubuntu.com> ** Attachment added: "lspci" http://librarian.launchpad.net/4292740/lspci.txt -- SGS Thomson 5in1 card reader not mounting sd https://launchpad.net/bugs/60963 From mmeija at tripleblack.net Mon Sep 18 06:43:45 2006 From: mmeija at tripleblack.net (MMeija) Date: Mon, 18 Sep 2006 06:43:45 -0000 Subject: [Bug 60963] Re: SGS Thomson 5in1 card reader not mounting sd References: <20060917205207.28762.71590.malonedeb@gandwana.ubuntu.com> Message-ID: <20060918064345.28823.16223.malone@gangotri.ubuntu.com> ** Attachment added: "lspci" http://librarian.launchpad.net/4292741/lspci.txt -- SGS Thomson 5in1 card reader not mounting sd https://launchpad.net/bugs/60963 From mmeija at tripleblack.net Mon Sep 18 06:44:28 2006 From: mmeija at tripleblack.net (MMeija) Date: Mon, 18 Sep 2006 06:44:28 -0000 Subject: [Bug 60963] Re: SGS Thomson 5in1 card reader not mounting sd References: <20060917205207.28762.71590.malonedeb@gandwana.ubuntu.com> Message-ID: <20060918064428.28823.75330.malone@gangotri.ubuntu.com> ** Attachment added: "dmesg" http://librarian.launchpad.net/4292745/dmesg.txt -- SGS Thomson 5in1 card reader not mounting sd https://launchpad.net/bugs/60963 From bugwatch at bugs.launchpad.net Mon Sep 18 07:41:30 2006 From: bugwatch at bugs.launchpad.net (Bug Watch Updater) Date: Mon, 18 Sep 2006 07:41:30 -0000 Subject: [Bug 22707] Re: do_initrd message fails in noninteractive install References: <20060113141946.21012.1426.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060918074208.21195.30542.launchpad@gangotri.ubuntu.com> *** This bug is a duplicate of bug 22711 *** ** Changed in: kernel-package (Debian) Status: Confirmed => Fix Released -- do_initrd message fails in noninteractive install https://launchpad.net/bugs/22707 From profox at ubuntu-nl.org Mon Sep 18 07:59:51 2006 From: profox at ubuntu-nl.org (profoX) Date: Mon, 18 Sep 2006 07:59:51 -0000 Subject: [Bug 36596] Re: system freeze after clicking task manager trash icon in "pan" newsreader References: <20060325145711.6279.38615.malonedeb@gandwana.ubuntu.com> Message-ID: <20060918075951.28890.29443.malone@gangotri.ubuntu.com> Great !!! Maybe we can get this working like it should now :) Tired of running 16bit ;) Thanks Paul. You saved me from finding/purchasing a new "geforce go" card. :) -- system freeze after clicking task manager trash icon in "pan" newsreader https://launchpad.net/bugs/36596 From utnubu at sievertsen.de Mon Sep 18 09:47:27 2006 From: utnubu at sievertsen.de (fx5) Date: Mon, 18 Sep 2006 09:47:27 -0000 Subject: [Bug 47561] Re: ACPI-battery monitoring stops working after some time References: <20060530194416.5009.28356.malonedeb@gandwana.ubuntu.com> Message-ID: <20060918094727.28890.27792.malone@gangotri.ubuntu.com> The bug is gone for me since linux-source-2.6.15 (2.6.15-26.46) * Cherry pick fix for HP laptop batteries. - Malone: #47561 - GIT SHA: 49fee981fa98f3c0a21f3d6c8193eddcc15e84e9 This is also the reason, why i don't provide the kernel-image anymore. -- ACPI-battery monitoring stops working after some time https://launchpad.net/bugs/47561 From pontus.schonberg at elisanet.fi Mon Sep 18 11:03:40 2006 From: pontus.schonberg at elisanet.fi (=?utf-8?q?Pontus_Sch=C3=B6nberg?=) Date: Mon, 18 Sep 2006 11:03:40 -0000 Subject: [Bug 37163] Re: Ipods react badly to checks for EFI partition tables References: <20060329132453.6279.44854.malonedeb@gandwana.ubuntu.com> Message-ID: <20060918110340.28941.58553.malone@gandwana.ubuntu.com> Ok, the last kernel version solved this problem for me too (and it even works if I unplug the iPod and plug nit back in again). So big thanks for everybody involved. :) -- Ipods react badly to checks for EFI partition tables https://launchpad.net/bugs/37163 From till.kamppeter at gmail.com Mon Sep 18 13:03:55 2006 From: till.kamppeter at gmail.com (Till Kamppeter) Date: Mon, 18 Sep 2006 13:03:55 -0000 Subject: [Bug 6627] Re: lexmark z53 blank pages References: <20060110202826.5372.9972.malonedeb@gangotri.ubuntu.com> Message-ID: <20060918130355.28762.40142.malone@gandwana.ubuntu.com> Gutenprint 5.0.0 final is officially released for Edgy now, please test it. ** Changed in: gutenprint (Ubuntu) Status: In Progress => Fix Released -- lexmark z53 blank pages https://launchpad.net/bugs/6627 From herve at lucidia.net Mon Sep 18 13:40:53 2006 From: herve at lucidia.net (=?utf-8?q?Herv=C3=A9_Fache?=) Date: Mon, 18 Sep 2006 13:40:53 -0000 Subject: [Bug 53216] Re: BUG() report in getnstimeofday: soft lockup References: <20060717081940.2082.7456.malonedeb@gandwana.ubuntu.com> Message-ID: <20060918134053.28941.84304.malone@gandwana.ubuntu.com> Same here: Dapper + Skype v1.30 (beta), the one with ALSA support. The machine is a Dell Dimension 1100. Almost every time someone contacts me (chat), the machine hangs for 2 minutes, or sometimes for ever. Still answers a ping though! I reported the problem to Skype themselves, but it's obviously a kernel problem. The problem is: the kernel says it's tainted (VMWare modules), so not much hope from LKML. -- BUG() report in getnstimeofday: soft lockup https://launchpad.net/bugs/53216 From zanglang at gmail.com Mon Sep 18 13:44:33 2006 From: zanglang at gmail.com (Jerry Chong) Date: Mon, 18 Sep 2006 13:44:33 -0000 Subject: [Bug 30766] Re: [acx111] default firmware not working for acx d-link dwl-g650+ References: <20060207221213.32736.87495.malonedeb@gandwana.ubuntu.com> Message-ID: <20060918134433.28823.9739.malone@gangotri.ubuntu.com> Updated so hopefully this will gain exposure? ** Changed in: linux-restricted-modules-2.6.15 (Ubuntu) Sourcepackagename: linux-restricted-modules-2.6.15 => linux-source-2.6.17 Status: Rejected => Unconfirmed -- [acx111] default firmware not working for acx d-link dwl-g650+ https://launchpad.net/bugs/30766 From brynjar at gmail.com Mon Sep 18 13:48:12 2006 From: brynjar at gmail.com (=?utf-8?q?Brynjar_Har=C3=B0arson?=) Date: Mon, 18 Sep 2006 13:48:12 -0000 Subject: [Bug 59983] Re: ndiswrapper in edgy broken References: <20060911235728.16647.6163.malonedeb@gangotri.ubuntu.com> Message-ID: <20060918134812.28823.68500.malone@gangotri.ubuntu.com> I did that and installed the new ndiswrapper package (ndiswrapper- utils-1.8) and it worked, so I don't know which change fixed it. -- ndiswrapper in edgy broken https://launchpad.net/bugs/59983 From mbizon at freebox.fr Mon Sep 18 13:49:31 2006 From: mbizon at freebox.fr (Maxime Bizon) Date: Mon, 18 Sep 2006 13:49:31 -0000 Subject: [Bug 60815] Re: sky2 driver is not present References: <20060916221456.28762.75457.malonedeb@gandwana.ubuntu.com> Message-ID: <20060918134931.28941.37892.malone@gandwana.ubuntu.com> ** Attachment added: "lspci" http://librarian.launchpad.net/4297359/lspci.txt -- sky2 driver is not present https://launchpad.net/bugs/60815 From mbizon at freebox.fr Mon Sep 18 13:49:58 2006 From: mbizon at freebox.fr (Maxime Bizon) Date: Mon, 18 Sep 2006 13:49:58 -0000 Subject: [Bug 60815] Re: sky2 driver is not present References: <20060916221456.28762.75457.malonedeb@gandwana.ubuntu.com> Message-ID: <20060918134958.28941.92568.malone@gandwana.ubuntu.com> ** Attachment added: "lspci -vvn" http://librarian.launchpad.net/4297361/lspci_numeric.txt -- sky2 driver is not present https://launchpad.net/bugs/60815 From mbizon at freebox.fr Mon Sep 18 13:49:13 2006 From: mbizon at freebox.fr (Maxime Bizon) Date: Mon, 18 Sep 2006 13:49:13 -0000 Subject: [Bug 60815] Re: sky2 driver is not present References: <20060916221456.28762.75457.malonedeb@gandwana.ubuntu.com> Message-ID: <20060918134913.28941.80148.malone@gandwana.ubuntu.com> Same problem, I tried to force usage of sk98lin for this device via sysfs (echo 1148:9e00 > .../new_id) and got an oops. Attached dmesg, lspci output and dmesg after oops. ** Attachment added: "dmesg output" http://librarian.launchpad.net/4297357/dmesg.txt -- sky2 driver is not present https://launchpad.net/bugs/60815 From mbizon at freebox.fr Mon Sep 18 13:50:18 2006 From: mbizon at freebox.fr (Maxime Bizon) Date: Mon, 18 Sep 2006 13:50:18 -0000 Subject: [Bug 60815] Re: sky2 driver is not present References: <20060916221456.28762.75457.malonedeb@gandwana.ubuntu.com> Message-ID: <20060918135018.28762.93850.malone@gandwana.ubuntu.com> ** Attachment added: "dmesg after oops" http://librarian.launchpad.net/4297363/oops.txt -- sky2 driver is not present https://launchpad.net/bugs/60815 From jerome.lacoste at gmail.com Mon Sep 18 13:58:12 2006 From: jerome.lacoste at gmail.com (Jerome Lacoste) Date: Mon, 18 Sep 2006 13:58:12 -0000 Subject: [Bug 53216] Re: [Bug 53216] Re: BUG() report in getnstimeofday: soft lockup References: <20060717081940.2082.7456.malonedeb@gandwana.ubuntu.com> <20060918134053.28941.84304.malone@gandwana.ubuntu.com> Message-ID: <5a2cf1f60609180658i3a0b7b95t50b996f6aa14cebc@mail.gmail.com> On 9/18/06, Hervé Fache wrote: > Same here: Dapper + Skype v1.30 (beta), the one with ALSA support. > The machine is a Dell Dimension 1100. I also have a Dell. Optiplex GX270 > Almost every time someone contacts me (chat), the machine hangs for 2 minutes, or sometimes for ever. Still answers a ping though! > > I reported the problem to Skype themselves, but it's obviously a kernel > problem. Ditto > The problem is: the kernel says it's tainted (VMWare modules), > so not much hope from LKML. mmm. I don't need VMWARE, so I can remove them before reproducing the issue. Have you tried ? In the mean time, I've stopped using skype. Jerome -- BUG() report in getnstimeofday: soft lockup https://launchpad.net/bugs/53216 From dehaeck at vki.ac.be Mon Sep 18 14:12:12 2006 From: dehaeck at vki.ac.be (samdehaeck) Date: Mon, 18 Sep 2006 14:12:12 -0000 Subject: [Bug 60038] Re: Scrambled sound in Edgy Eft Knot 2 References: <20060912080228.17818.92061.malonedeb@gandwana.ubuntu.com> Message-ID: <20060918141212.28823.31090.malone@gangotri.ubuntu.com> Hello, thanks for helping. I just tried with Edgy Knot 3 and it is still identically the same problem. I am also not quite sure if the importance should be at low; this bug prevents me from booting the install cd, and prevents me from having any sound on my linux desktop. Since I believe that the Intel ICH5 sound card is quite common, this bug is a showstopper for me. thanks again, Sam. -- Scrambled sound in Edgy Eft Knot 2 https://launchpad.net/bugs/60038 From herve at lucidia.net Mon Sep 18 14:49:48 2006 From: herve at lucidia.net (=?utf-8?q?Herv=C3=A9_Fache?=) Date: Mon, 18 Sep 2006 14:49:48 -0000 Subject: [Bug 53216] Re: [Bug 53216] Re: [Bug 53216] Re: BUG() report in getnstimeofday: soft lockup References: <20060717081940.2082.7456.malonedeb@gandwana.ubuntu.com> <20060918134053.28941.84304.malone@gandwana.ubuntu.com> <5a2cf1f60609180658i3a0b7b95t50b996f6aa14cebc@mail.gmail.com> Message-ID: <4413284c0609180749l3cc67232gcf1e0698b78d5488@mail.gmail.com> On 9/18/06, Jerome Lacoste wrote: > I also have a Dell. Optiplex GX270 Hmmm! > > The problem is: the kernel says it's tainted (VMWare modules), > > so not much hope from LKML. > > mmm. I don't need VMWARE, so I can remove them before reproducing the > issue. Have you tried ? Nop, but could (not needing it for my new project). > In the mean time, I've stopped using skype. I can't: company requirement! Seems we have a number of common factors here: Dell + VMWare Have you got a reliable way of triggering the problem? It seems erratic here... -- BUG() report in getnstimeofday: soft lockup https://launchpad.net/bugs/53216 From vachun at spintec.com Mon Sep 18 16:28:02 2006 From: vachun at spintec.com (vachun) Date: Mon, 18 Sep 2006 16:28:02 -0000 Subject: [Bug 61108] GRUB's menu.lst modified in wrong way -> Error 15 File not found on next reboot References: <20060918162802.28941.99880.malonedeb@gandwana.ubuntu.com> Message-ID: <20060918162802.28941.99880.malonedeb@gandwana.ubuntu.com> Public bug reported: Binary package hint: linux-image-2.6.15-26-amd64-generic When linux is not on first partition on first hd, it doesn't boot after this kernel update ( linux- image-2.6.15-26-amd64-generic_2.6.15-26.47_amd64.deb ) because all grub entries are 'patched' to point to (hd0,0) and /dev/hda1 It was verified on 2 machines: 1) original menu lst entry title Ubuntu, kernel 2.6.15-26-amd64-generic root (hd0,1) kernel /boot/vmlinuz-2.6.15-26-amd64-generic root=/dev/sda2 ro quiet splash initrd /boot/initrd.img-2.6.15-26-amd64-generic savedefault boot after upgrade: title Ubuntu, kernel 2.6.15-26-amd64-generic root (hd0,0) kernel /boot/vmlinuz-2.6.15-26-amd64-generic root=/dev/hda1 ro quiet splash initrd /boot/initrd.img-2.6.15-26-amd64-generic savedefault boot the second machine has (hd0,5) replaced with (hd0,0) and /dev/hda6 with /dev/hda1 It was nightmare, because it lock out one of our customer's server Friday evening and we should make 300km trip in order to fix things up :-( ** Affects: linux-source-2.6.15 (Ubuntu) Importance: Untriaged Status: Unconfirmed -- GRUB's menu.lst modified in wrong way -> Error 15 File not found on next reboot https://launchpad.net/bugs/61108 From jerome.lacoste at gmail.com Mon Sep 18 16:33:30 2006 From: jerome.lacoste at gmail.com (Jerome Lacoste) Date: Mon, 18 Sep 2006 16:33:30 -0000 Subject: [Bug 53216] Re: [Bug 53216] Re: [Bug 53216] Re: [Bug 53216] Re: BUG() report in getnstimeofday: soft lockup References: <20060717081940.2082.7456.malonedeb@gandwana.ubuntu.com> <20060918134053.28941.84304.malone@gandwana.ubuntu.com> <5a2cf1f60609180658i3a0b7b95t50b996f6aa14cebc@mail.gmail.com> <4413284c0609180749l3cc67232gcf1e0698b78d5488@mail.gmail.com> Message-ID: <5a2cf1f60609180933m6204da7j18a89bf872350134@mail.gmail.com> > > In the mean time, I've stopped using skype. > I can't: company requirement! Company relies on skype ! Ouch scary... > Seems we have a number of common factors here: Dell + VMWare > Have you got a reliable way of triggering the problem? It seems erratic here... It happens 99% of the time someones sends me a message. Here goes your reproducibility factor. Jerome -- BUG() report in getnstimeofday: soft lockup https://launchpad.net/bugs/53216 From bobby.weinmann at gmail.com Mon Sep 18 16:44:00 2006 From: bobby.weinmann at gmail.com (ybkosher) Date: Mon, 18 Sep 2006 16:44:00 -0000 Subject: [Bug 56878] Re: No more sound (VIA 8233) in Dapper after upgrade from Breezy References: <20060819061811.12543.25978.malonedeb@gangotri.ubuntu.com> Message-ID: <20060918164401.28890.54405.malone@gangotri.ubuntu.com> I upgraded from kernel 2.6.15-26.46 to 2.6.15-26.47 (both were dapper). Sound was working fine, now it is broken. I also use the snd_via82xx driver. dmesg (after modprobe snd_via82xx): [17179790.944000] snd_pcm: disagrees about version of symbol boot_cpu_data [17179790.944000] snd_pcm: Unknown symbol boot_cpu_data [17179790.956000] snd_ac97_codec: Unknown symbol snd_interval_refine [17179790.956000] snd_ac97_codec: Unknown symbol snd_pcm_hw_rule_add [17179790.980000] snd_pcm: disagrees about version of symbol boot_cpu_data [17179790.980000] snd_pcm: Unknown symbol boot_cpu_data [17179790.984000] snd_ac97_codec: Unknown symbol snd_interval_refine [17179790.984000] snd_ac97_codec: Unknown symbol snd_pcm_hw_rule_add [17179790.984000] snd_via82xx: Unknown symbol snd_ac97_resume [17179790.984000] snd_via82xx: Unknown symbol snd_pcm_new [17179790.984000] snd_via82xx: Unknown symbol snd_pcm_limit_hw_rates [17179790.984000] snd_via82xx: Unknown symbol snd_pcm_lib_preallocate_pages_for_all [17179790.984000] snd_via82xx: Unknown symbol snd_ac97_set_rate [17179790.984000] snd_via82xx: Unknown symbol snd_pcm_format_physical_width [17179790.984000] snd_via82xx: Unknown symbol snd_ac97_update_bits [17179790.984000] snd_via82xx: Unknown symbol snd_ac97_mixer [17179790.984000] snd_via82xx: Unknown symbol snd_ac97_bus [17179790.984000] snd_via82xx: Unknown symbol snd_ac97_suspend [17179790.984000] snd_via82xx: Unknown symbol snd_pcm_lib_malloc_pages [17179790.984000] snd_via82xx: Unknown symbol snd_pcm_lib_ioctl [17179790.984000] snd_via82xx: Unknown symbol snd_pcm_lib_free_pages [17179790.984000] snd_via82xx: Unknown symbol snd_pcm_set_ops [17179790.984000] snd_via82xx: Unknown symbol snd_pcm_hw_constraint_list [17179790.988000] snd_via82xx: Unknown symbol snd_pcm_sgbuf_ops_page [17179790.988000] snd_via82xx: Unknown symbol snd_ac97_get_short_name [17179790.988000] snd_via82xx: Unknown symbol snd_pcm_suspend_all [17179790.988000] snd_via82xx: Unknown symbol snd_pcm_hw_constraint_integer [17179790.988000] snd_via82xx: Unknown symbol snd_pcm_period_elapsed [17179790.988000] snd_via82xx: Unknown symbol snd_ac97_tune_hardware There is a bug related to Nvidia (#60433) that says the boot_cpu_data symbol was changed in kernel 47. This seems to be the problem. -- No more sound (VIA 8233) in Dapper after upgrade from Breezy https://launchpad.net/bugs/56878 From schroeder at stw-bonn.de Mon Sep 18 17:23:13 2006 From: schroeder at stw-bonn.de (Kai Schroeder) Date: Mon, 18 Sep 2006 17:23:13 -0000 Subject: [Bug 60815] Re: sky2 driver is not present References: <20060916221456.28762.75457.malonedeb@gandwana.ubuntu.com> Message-ID: <20060918172313.28941.63075.malone@gandwana.ubuntu.com> i can confirm this problem too -- sky2 driver is not present https://launchpad.net/bugs/60815 From schroeder at stw-bonn.de Mon Sep 18 17:56:13 2006 From: schroeder at stw-bonn.de (Kai Schroeder) Date: Mon, 18 Sep 2006 17:56:13 -0000 Subject: [Bug 60815] Re: sky2 driver is not present References: <20060916221456.28762.75457.malonedeb@gandwana.ubuntu.com> Message-ID: <20060918175614.28890.54371.malone@gangotri.ubuntu.com> ok, fixed for me in linux-image-2.6.15-27-686 -- sky2 driver is not present https://launchpad.net/bugs/60815 From tommy.trussell at gmail.com Mon Sep 18 18:37:08 2006 From: tommy.trussell at gmail.com (Tommy Trussell) Date: Mon, 18 Sep 2006 18:37:08 -0000 Subject: [Bug 39499] Re: System doesn't power down under Dapper 686 References: <20060413211152.16443.87018.malonedeb@gandwana.ubuntu.com> Message-ID: <20060918183709.28762.98215.malone@gandwana.ubuntu.com> Update: I'm not sure at what version this changed, but now the system requires acpi=force to shut down as expected even on the 386 kernels. I Just installed the latest kernel update (it says Sept. 8 in dmesg)... On this old 500 MHz machine I wondered if I was seeing any benefit from the 686 kernel anyway. (It's not dramatically faster.) So now I'm back to the 386 kernel and still having to tweak grub with every kernel update. -- System doesn't power down under Dapper 686 https://launchpad.net/bugs/39499 From wodz at soliton.ch.pw.edu.pl Mon Sep 18 20:37:58 2006 From: wodz at soliton.ch.pw.edu.pl (wodz) Date: Mon, 18 Sep 2006 20:37:58 -0000 Subject: [Bug 38865] Re: sky2 driver freezing system after ifdown and ifup References: <20060409125752.32313.97119.malonedeb@gandwana.ubuntu.com> Message-ID: <20060918203758.28941.14369.malone@gandwana.ubuntu.com> For me last update (.47) also broke network access. The sky2 worked correctly. So I was forced to downgrade. Hardware is Marvell 88E8053 (rev19) in Gericom Supersonic PCIE notebook. -- sky2 driver freezing system after ifdown and ifup https://launchpad.net/bugs/38865 From gtapp at videotron.ca Mon Sep 18 21:28:14 2006 From: gtapp at videotron.ca (noume) Date: Mon, 18 Sep 2006 21:28:14 -0000 Subject: [Bug 55063] Installer crashed References: <20060803152543.5063.66495.malonedeb@gandwana.ubuntu.com> Message-ID: <20060918212814.28890.90241.launchpad@canonical@gangotri.ubuntu.com> Public bug reported: Traceback (most recent call last): File "/usr/lib/python2.4/site-packages/ubiquity/frontend/gtkui.py", line 330, in poke_screensaver child_setup=drop_privileges) GError: Impossible de lire suffisamment de données depuis le tube du processus de pid (Succès) [(english follows) Sur la page de rapport de bogue (1), pas de lien pour attacher les fichier /var/log/installer/syslog, /var/log/syslog et /var/log/partman. On the bug report page (1), no link to attach the files /var/log/installer/syslog, /var/log/syslog, and /var/log/partman 1. https://launchpad.net/distros/ubuntu/+source/ubiquity/+filebug?redirection_url= ** Affects: linux-source-2.6.15 (Ubuntu) Importance: Untriaged Status: Confirmed -- Installer crashed https://launchpad.net/bugs/55063 From cjwatson at canonical.com Mon Sep 18 21:28:14 2006 From: cjwatson at canonical.com (Colin Watson) Date: Mon, 18 Sep 2006 21:28:14 -0000 Subject: [Bug 55063] Re: Installer crashed References: <20060803152543.5063.66495.malonedeb@gandwana.ubuntu.com> Message-ID: <20060918212814.28890.24854.malone@gangotri.ubuntu.com> There's a kernel oops in that /var/log/syslog attachment, which probably has something to do with it. I don't think there's a ubiquity bug here. I'd agree with Vassilis that checking the CD and the CD drive lens would be a good idea. ** Changed in: ubiquity (Ubuntu) Sourcepackagename: ubiquity => linux-source-2.6.15 -- Installer crashed https://launchpad.net/bugs/55063 From game_ender67 at hotmail.com Mon Sep 18 22:38:20 2006 From: game_ender67 at hotmail.com (Game_Ender) Date: Mon, 18 Sep 2006 22:38:20 -0000 Subject: [Bug 57502] Re: JMicron PATA/SATA Controller does not work References: <20060823192235.13463.13121.malonedeb@gandwana.ubuntu.com> Message-ID: <20060918223820.28762.36683.malone@gandwana.ubuntu.com> That is only the next official release, I would hope that there would be a nightly as stated above that includes the fix. Until then I am holding off on building my Core 2 Duo system. -- JMicron PATA/SATA Controller does not work https://launchpad.net/bugs/57502 From boettiger3 at comcast.net Mon Sep 18 23:02:18 2006 From: boettiger3 at comcast.net (Carl Boettiger) Date: Mon, 18 Sep 2006 23:02:18 -0000 Subject: [Bug 22148] Re: MSI Neo4 FI hangs without acpi=off References: <20060113141642.21012.13502.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060918230218.28762.81636.malone@gandwana.ubuntu.com> I am running Edgy knot 3 amd64 on a Turion 64X2 processor. I have this exact problem, I can only boot with acpi=off. I tried SuSE in frustration, same problem when using kernel 2.6.16 with smp, (supports the dual core), but can boot with acpi using the default kernel (without smp dual core support). Perhaps an older kernel would work better? I also had this difficulty in booting dapper-drake amd64, but never tried installing that and stepping down to the non smp kernel... -- MSI Neo4 FI hangs without acpi=off https://launchpad.net/bugs/22148 From kungfoobar at gmail.com Mon Sep 18 23:26:57 2006 From: kungfoobar at gmail.com (Alberto Torres) Date: Mon, 18 Sep 2006 23:26:57 -0000 Subject: [Bug 34831] Re: Hardlock of entire system (Dapper Flight 5) References: <20060314003317.30057.9117.malonedeb@gandwana.ubuntu.com> Message-ID: <20060918232657.28941.6269.malone@gandwana.ubuntu.com> The previous workaround I told doesn't work, but... I've found a WORKING workaround: unloading the snd_emu10k1_synth I don't need it since it's just for loading soundfonts into soundcard RAM, AFAIK. Instead I use qsynth with soundfonts of any size. I've just deleted the file /lib/modules/2.6.15-26-k7/kernel/sound/pci/emu10k1/snd-emu10k1.ko (where 2.6.15-26-k7 is your kernel version). My system no longer freezes. The problem is probably located in that module. -- Hardlock of entire system (Dapper Flight 5) https://launchpad.net/bugs/34831 From gtapp at videotron.ca Tue Sep 19 00:18:44 2006 From: gtapp at videotron.ca (noume) Date: Tue, 19 Sep 2006 00:18:44 -0000 Subject: [Bug 55063] Re: [Bug 55063] Re: Installer crashed References: <20060803152543.5063.66495.malonedeb@gandwana.ubuntu.com> <20060918212814.28890.24854.malone@gangotri.ubuntu.com> Message-ID: <450F3764.1070600@videotron.ca> [English follows] Je me suis enfin décidé à reprendre l'installation (avec le même CD) et tout s'est bien déroulé. Merci Colin et Vassilis pour vos suggestions. I finaly decided to re-install Ubuntu (with the same CD) and all the process develops fine. Thanks Colin and Vassilis for your suggestions. Gérald Tapp (Noume) Colin Watson a écrit : > There's a kernel oops in that /var/log/syslog attachment, which probably > has something to do with it. I don't think there's a ubiquity bug here. > I'd agree with Vassilis that checking the CD and the CD drive lens would > be a good idea. > > ** Changed in: ubiquity (Ubuntu) > Sourcepackagename: ubiquity => linux-source-2.6.15 > > -- Installer crashed https://launchpad.net/bugs/55063 From towsonu2003 at gmail.com Tue Sep 19 01:50:38 2006 From: towsonu2003 at gmail.com (towsonu2003) Date: Tue, 19 Sep 2006 01:50:38 -0000 Subject: [Bug 38589] Re: Dapper flight6: availble kernels selection References: <20060407115633.24516.55871.malonedeb@gangotri.ubuntu.com> Message-ID: <20060919015039.28941.75863.malone@gandwana.ubuntu.com> is this fixed now? -- Dapper flight6: availble kernels selection https://launchpad.net/bugs/38589 From mcg at braintube.com Tue Sep 19 02:39:40 2006 From: mcg at braintube.com (Matthew) Date: Tue, 19 Sep 2006 02:39:40 -0000 Subject: [Bug 57265] Re: Return value of slave_configure in scsi_scan.c is ignored References: <20060822122546.13507.11556.malonedeb@gandwana.ubuntu.com> Message-ID: <20060919023940.28823.76251.malone@gangotri.ubuntu.com> Any chance this is going to be fixed? One of the reasons I switched from Debian to Ubuntu was to not have to run a custom kernel and here I am, back to custom. -- Return value of slave_configure in scsi_scan.c is ignored https://launchpad.net/bugs/57265 From rtg at aapsc.com Tue Sep 19 02:52:13 2006 From: rtg at aapsc.com (Richard Green) Date: Tue, 19 Sep 2006 02:52:13 -0000 Subject: [Bug 24533] Re: Fail to boot smp kernel References: <20060113142932.21012.10689.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060919025213.28941.44833.malone@gandwana.ubuntu.com> I found an old Matrox Millenium PCI video card, and swapped it into this machine. lspci reports it as: VGA compatible controller: Matrox Graphics, Inc. MGA 2064W [Millennium] (rev 01) With it, I've been able to boot the 686SMP kernel, and startx with KDE. It's been running all of ten minutes now, but that's ten minutes more than I ever got with the ATI card(AGP). ...so it's looking more and more like this is really a manifestation of the 686/ATI 'random lockup' problem that the fellow at cipherfunk claims to have fixed. I posted his kernel patch here earlier. Here is his patch for the xorg driver. ** Attachment added: "Patch for xorg ati driver" http://librarian.launchpad.net/4309527/xserver-xorg-driver-ati_6.5.7.3-0ubuntu7.diff.gz -- Fail to boot smp kernel https://launchpad.net/bugs/24533 From ben.collins at ubuntu.com Tue Sep 19 03:56:19 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Tue, 19 Sep 2006 03:56:19 -0000 Subject: [Bug 60815] Re: sky2 driver is not present References: <20060916221456.28762.75457.malonedeb@gandwana.ubuntu.com> Message-ID: <20060919035619.28941.45028.launchpad@gandwana.ubuntu.com> *** This bug is a duplicate of bug 38865 *** ** This bug has been marked a duplicate of bug 38865 sky2 driver freezing system after ifdown and ifup -- sky2 driver is not present https://launchpad.net/bugs/60815 From ben.collins at ubuntu.com Tue Sep 19 03:56:03 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Tue, 19 Sep 2006 03:56:03 -0000 Subject: [Bug 38865] Re: sky2 driver freezing system after ifdown and ifup References: <20060409125752.32313.97119.malonedeb@gandwana.ubuntu.com> Message-ID: <20060919035604.28941.32368.launchpad@gandwana.ubuntu.com> ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Fix Committed => Fix Released ** Bug 60815 has been marked a duplicate of this bug ** Changed in: linux-source-2.6.17 (Ubuntu) Status: Fix Committed => Fix Released -- sky2 driver freezing system after ifdown and ifup https://launchpad.net/bugs/38865 From ben.collins at ubuntu.com Tue Sep 19 04:06:30 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Tue, 19 Sep 2006 04:06:30 -0000 Subject: [Bug 28647] Re: sbp2 hot plug causes hard crashes References: <20060116010423.6087.7224.malonedeb@gangotri.ubuntu.com> Message-ID: <20060919040630.28762.77645.launchpad@gandwana.ubuntu.com> ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Fix Committed => Fix Released -- sbp2 hot plug causes hard crashes https://launchpad.net/bugs/28647 From rtg at aapsc.com Tue Sep 19 04:26:22 2006 From: rtg at aapsc.com (Richard Green) Date: Tue, 19 Sep 2006 04:26:22 -0000 Subject: [Bug 24533] Re: Fail to boot smp kernel References: <20060113142932.21012.10689.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060919042622.28941.23091.malone@gandwana.ubuntu.com> Another data point: The system seems to be stable with the 686SMP kernel with an ATI rage pro PCI video card installed: VGA compatible controller: ATI Technologies Inc 3D Rage Pro 215GP (rev 5c) Now, the question seems to be whether the bug is specific to the Radeon 7000 chipset, or possibly something with the AGP implementation? I'll see if I can dig up some other AGP video cards... -- Fail to boot smp kernel https://launchpad.net/bugs/24533 From rtg at aapsc.com Tue Sep 19 05:14:55 2006 From: rtg at aapsc.com (Richard Green) Date: Tue, 19 Sep 2006 05:14:55 -0000 Subject: [Bug 24533] Re: Fail to boot smp kernel References: <20060113142932.21012.10689.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060919051455.28762.32459.malone@gandwana.ubuntu.com> System booted and appears stable with X and KDE running. Current video card is: VGA compatible controller: nVidia Corporation NV5M64 [RIVA TNT2 Model 64/Model 64 Pro] (rev 15) So it isn't the AGP bus per se. Unfortunatly, I don't have a PCI version of the Radeon 7000 card available, to see if the bug is in the chipset code, or the bus logic... -- Fail to boot smp kernel https://launchpad.net/bugs/24533 From thegeeker at gra.midco.net Tue Sep 19 05:27:56 2006 From: thegeeker at gra.midco.net (Vaxius) Date: Tue, 19 Sep 2006 05:27:56 -0000 Subject: [Bug 27604] Re: [madwifi] Thinkpad z60t wifi does not work References: <20060113151824.29386.11733.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060919052756.28823.16901.malone@gangotri.ubuntu.com> Same problem on Thinkpad R60, although it was working a few days ago (no, restarts/reloading module doesn't help). $sudo modprobe ath_pci $dmesg ... [17234327.760000] ath_hal: 0.9.14.9 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413) [17234327.764000] wlan: 0.8.6.0 (EXPERIMENTAL) [17234327.764000] ath_rate_sample: 1.2 [17234327.768000] ath_pci: 0.9.6.0 (EXPERIMENTAL) [17234327.768000] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 74 [17234327.768000] PCI: Setting latency timer of device 0000:03:00.0 to 64 [17234327.768000] ath_attach: unable to attach hardware: 'Hardware didn't respond as expected' (HAL status 3) [17234327.768000] ACPI: PCI interrupt for device 0000:03:00.0 disabled $lspci ... 0000:03:00.0 Ethernet controller: Atheros Communications, Inc. AR5212 802.11abg NIC (rev 01) ... I'm aware that there is a switch on the front edge of the laptop used for turning wireless on/off, and have tried loading the driver while in both positions just for the hell of it. I'd really like to have my wireless back. -- [madwifi] Thinkpad z60t wifi does not work https://launchpad.net/bugs/27604 From rtg at aapsc.com Tue Sep 19 05:35:16 2006 From: rtg at aapsc.com (Richard Green) Date: Tue, 19 Sep 2006 05:35:16 -0000 Subject: [Bug 24533] Re: Fail to boot smp kernel References: <20060113142932.21012.10689.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060919053516.28823.6793.malone@gangotri.ubuntu.com> OK, here's the last video card in my drawer: VGA compatible controller: nVidia Corporation NV11 [GeForce2 MX/MX 400] (rev b2) It's an AGP card, and the system appears stable running X and KDE. So here's the bottom line: kernel 2.6.15-26-686, and at least four earlier 686 kernels, lock up solid during KDE initialization on my dual- pIII system, Only when equipped with a Radeon 7000/VE AGP video card. Next, I may try running this combination on a single-processor system, but I'll leave that for another day. -- Fail to boot smp kernel https://launchpad.net/bugs/24533 From johan.walles at gmail.com Tue Sep 19 07:08:58 2006 From: johan.walles at gmail.com (Johan Walles) Date: Tue, 19 Sep 2006 07:08:58 -0000 Subject: [Bug 49450] Re: 2.6.15-23-686 hangs a couple of times per week References: <20060612112731.25801.13769.malonedeb@gangotri.ubuntu.com> Message-ID: <20060919070858.28890.37394.malone@gangotri.ubuntu.com> I've run memtest86+ over night (14h?) and it didn't find any problems, so AFAICT this is more likely to be a kernel issue than a hardware issue. Help! -- 2.6.15-23-686 hangs a couple of times per week https://launchpad.net/bugs/49450 From ogomez at hispafuentes.com Tue Sep 19 08:33:20 2006 From: ogomez at hispafuentes.com (=?utf-8?q?Oscar_Manuel_G=C3=B3mez_Senovilla?=) Date: Tue, 19 Sep 2006 08:33:20 -0000 Subject: [Bug 35474] Re: Dapper - RT61 with wep key doesn't work References: <20060318161032.12254.27781.malonedeb@gandwana.ubuntu.com> Message-ID: <20060919083320.28890.66931.malone@gangotri.ubuntu.com> I'd just like to add a comment here. I've experienced the same, and recompiling the source provided above and replacing the rt61.ko with the generated one has solved the problem, but there's one thing I'm unable to understand: Booting Dapper in "Live CD mode" (without installing) WORKS PERFECTLY, no problem at all, but when installing and after rebooting, the problem raises as described. I've tested the kernel version and the module file (rt61.ko) at setup time and I find they're exactly the same. This fact has led me that the driver provided by the kernel was good, and try to find a solution somewhere in the installation. Just for learning and my mind's health, can anybody explain this? -- Dapper - RT61 with wep key doesn't work https://launchpad.net/bugs/35474 From pc741tw at gmail.com Tue Sep 19 08:45:17 2006 From: pc741tw at gmail.com (MENG HSING.TUNG) Date: Tue, 19 Sep 2006 08:45:17 -0000 Subject: [Bug 57502] Re: JMicron PATA/SATA Controller does not work References: <20060823192235.13463.13121.malonedeb@gandwana.ubuntu.com> Message-ID: <20060919084517.28890.30690.malone@gangotri.ubuntu.com> I want daily build include fix. I need to use Ubuntu. -- JMicron PATA/SATA Controller does not work https://launchpad.net/bugs/57502 From michael at thedarkwinter.com Tue Sep 19 09:23:06 2006 From: michael at thedarkwinter.com (thedarkwinter) Date: Tue, 19 Sep 2006 09:23:06 -0000 Subject: [Bug 61231] Kernel reverted to 386 version References: <20060919092306.28941.7471.malonedeb@gandwana.ubuntu.com> Message-ID: <20060919092306.28941.7471.malonedeb@gandwana.ubuntu.com> Public bug reported: Binary package hint: linux-image-2.6-amd64-generic Hi Firstly Im running AMD64 (6.06) installed from the AMD64 Desktop CD. Im not entirely sure how this happened, i just noticed this morning when the automatic updates came up, there was an update kernel to ....386, so i did the uname -r thing, and i am currently running 386 version(!?!), and doing a search in synaptic for linux image it doesn't even give me the amd64-generic package to select. Yesterday it came up with a kernel update but i didn't really look at what it was, i just let it install. Dont know if thats helpful at all to you... Michael ** Affects: linux-meta (Ubuntu) Importance: Untriaged Status: Unconfirmed -- Kernel reverted to 386 version https://launchpad.net/bugs/61231 From johan.walles at gmail.com Tue Sep 19 11:02:43 2006 From: johan.walles at gmail.com (Johan Walles) Date: Tue, 19 Sep 2006 11:02:43 -0000 Subject: [Bug 49450] 2.6.15-27-686 has the same problem. References: <20060612112731.25801.13769.malonedeb@gangotri.ubuntu.com> Message-ID: <20060919110243.28941.98803.malone@gandwana.ubuntu.com> 2.6.15-27-686 also hangs intermittently for me. -- 2.6.15-23-686 hangs a couple of times per week https://launchpad.net/bugs/49450 From frlinux at gmail.com Tue Sep 19 11:10:53 2006 From: frlinux at gmail.com (FRLinux) Date: Tue, 19 Sep 2006 11:10:53 -0000 Subject: [Bug 37862] Re: kernel panic on IRQ allocation References: <20060403125606.25836.84932.malonedeb@gangotri.ubuntu.com> Message-ID: <20060919111053.28941.37889.malone@gandwana.ubuntu.com> Hello, I just tried on knot2 and have the same issue again, this is definitly related to the way the kernel is handling the SATA drive since i get a kernel panic with plenty of symbols linked to : scsci_error_handler. It is a laptop I've been trying to install since April for a user in my workplace and Linux is quite looking bad since i always get that marvellous sentence : "Under Windows, everything works!". Any suggestions ? Cheers, Steph -- kernel panic on IRQ allocation https://launchpad.net/bugs/37862 From mumbly_58 at yahoo.fr Tue Sep 19 11:23:42 2006 From: mumbly_58 at yahoo.fr (Olivier Prieur) Date: Tue, 19 Sep 2006 11:23:42 -0000 Subject: [Bug 38263] Re: freeze at startup References: <20060405194706.24486.46138.malonedeb@gangotri.ubuntu.com> Message-ID: <20060919112342.28941.3912.malone@gandwana.ubuntu.com> Edgy Knot3 : same probleme ... and the computer boots with these options : acpi=off irqpoll xforcevesa ... but it seems xforcevesa does not "work" ... with a dpkg-reconfigure xserver-xorg, choosing vesa graphic driver, it works... -- freeze at startup https://launchpad.net/bugs/38263 From tenshu at gmail.com Tue Sep 19 11:47:09 2006 From: tenshu at gmail.com (tenshu) Date: Tue, 19 Sep 2006 11:47:09 -0000 Subject: [Bug 35474] Re: Dapper - RT61 with wep key doesn't work References: <20060318161032.12254.27781.malonedeb@gandwana.ubuntu.com> Message-ID: <20060919114709.28941.72882.malone@gandwana.ubuntu.com> According to Oscar RT61 still don't work untill you go and compile the drivers from ralink site. I didn't try dapper in "Live cd mode" but i just try edgy Knot3 and this time it get worse my RT61 wifi card isn't recognized properly. I get an wlan0 & wlanmaster interface and nothing comes out when i do "iwlist scan" like Bruce Mille described. I will attach a dmesg and oops ASAP for you Ben Collins Tenshu -- Dapper - RT61 with wep key doesn't work https://launchpad.net/bugs/35474 From silla at netvalley.it Tue Sep 19 13:07:56 2006 From: silla at netvalley.it (Biker) Date: Tue, 19 Sep 2006 13:07:56 -0000 Subject: [Bug 60073] Re: Lexmark z52 Printer prints blank pages References: <20060912121230.17818.68258.malonedeb@gandwana.ubuntu.com> Message-ID: <20060919130756.3440.58071.malone@gangotri.ubuntu.com> *** This bug is a duplicate of bug 6627 *** I have the same exact problem on 32 bit kubuntu dapper. Is there a workaround? -- Lexmark z52 Printer prints blank pages https://launchpad.net/bugs/60073 From jonathan_sieber at yahoo.de Tue Sep 19 14:31:24 2006 From: jonathan_sieber at yahoo.de (Jonathan Sieber) Date: Tue, 19 Sep 2006 14:31:24 -0000 Subject: [Bug 34831] Re: Hardlock of entire system (Dapper Flight 5) References: <20060314003317.30057.9117.malonedeb@gandwana.ubuntu.com> Message-ID: <20060919143124.17606.32379.malone@gandwana.ubuntu.com> I don't think this is the problem, since i don't have an emu10k1-soundcard at all. But my problem doesn't occure to when i ensure that no other program is using my soundcard (/dev/dsp is available). My system only freezes if i forget a program. -- Hardlock of entire system (Dapper Flight 5) https://launchpad.net/bugs/34831 From michael.aye at gmx.net Tue Sep 19 15:12:59 2006 From: michael.aye at gmx.net (Maye) Date: Tue, 19 Sep 2006 15:12:59 -0000 Subject: [Bug 39315] Re: Keyboard random repeat and dropped key presses References: <20060412160910.15436.50293.malonedeb@gangotri.ubuntu.com> Message-ID: <20060919151300.17606.2022.malone@gandwana.ubuntu.com> I report, that on an up-to-date dapper installation (Kubuntu) with 2.6.15-27 kernel (as of yesterday), NO plptools installed, having none of the above mentioned 3 packages installed and having tried out all tricks with removal of seemingly relevant acpi modules, this bug does NOT go away. This page says, that a fix has been released? What would that be? Thanks, Michael PS: Thinkpad R51, Breezy was ok. -- Keyboard random repeat and dropped key presses https://launchpad.net/bugs/39315 From kungfoobar at gmail.com Tue Sep 19 15:20:36 2006 From: kungfoobar at gmail.com (Alberto Torres) Date: Tue, 19 Sep 2006 15:20:36 -0000 Subject: [Bug 34831] Re: Hardlock of entire system (Dapper Flight 5) References: <20060314003317.30057.9117.malonedeb@gandwana.ubuntu.com> Message-ID: <20060919152037.17562.64224.malone@gandwana.ubuntu.com> Yeah, you're right. It happens also for me in a hda-intel soundcard in a laptop. The owner of that laptop has bought a sound blaster 24-bit usb, and I made a script which unloads all snd_ modules and loads snd-usb- audio and snd-seq, so he can use MIDI programs (although there is no MIDI support for that soundcard in linux, I think). What I wanted to say is that the problem may be tracked down starting in emu10k1_synth.c which is 120 lines long. By the way, it should be noted that I had a similar problem in breezy (or hoary, not sure): The entire sistem freezes because snd-seq wasn't loaded. So I would load that module, and it worked. -- Hardlock of entire system (Dapper Flight 5) https://launchpad.net/bugs/34831 From ben.collins at ubuntu.com Tue Sep 19 15:58:27 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Tue, 19 Sep 2006 15:58:27 -0000 Subject: [Bug 22148] Re: MSI Neo4 FI hangs without acpi=off References: <20060113141642.21012.13502.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060919155827.23105.60479.malone@gangotri.ubuntu.com> Please try the latest edgy kernel (available some time today): 2.6.17-8.22 -- MSI Neo4 FI hangs without acpi=off https://launchpad.net/bugs/22148 From ben.collins at ubuntu.com Tue Sep 19 16:02:04 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Tue, 19 Sep 2006 16:02:04 -0000 Subject: [Bug 24925] Re: Unlink after no-IRQ References: <20060113143135.21012.9317.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060919160204.17606.30291.launchpad@gandwana.ubuntu.com> ** Also affects: linux-source-2.6.17 (Ubuntu) Importance: Untriaged Status: Unconfirmed ** Changed in: linux-source-2.6.17 (Ubuntu) Importance: Untriaged => High Assignee: (unassigned) => Ben Collins Status: Unconfirmed => Confirmed Target: None => ubuntu-6.10 -- Unlink after no-IRQ https://launchpad.net/bugs/24925 From ben.collins at ubuntu.com Tue Sep 19 16:11:32 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Tue, 19 Sep 2006 16:11:32 -0000 Subject: [Bug 29789] Re: tv card audio not working References: <20060126170552.26274.32755.malonedeb@gangotri.ubuntu.com> Message-ID: <20060919161132.17562.74318.launchpad@gandwana.ubuntu.com> ** Changed in: linux-source-2.6.15 (Ubuntu) Importance: Wishlist => Medium Assignee: Ubuntu Kernel Team => (unassigned) Status: Needs Info => Confirmed ** Changed in: linux-source-2.6.17 (Ubuntu) Importance: Untriaged => Medium Status: Needs Info => Confirmed ** Bug watch added: Linux Kernel Bug Tracker #7109 http://bugzilla.kernel.org/show_bug.cgi?id=7109 ** Also affects: linux (upstream) via http://bugzilla.kernel.org/show_bug.cgi?id=7109 Importance: Unknown Status: Unknown -- tv card audio not working https://launchpad.net/bugs/29789 From ben.collins at ubuntu.com Tue Sep 19 16:20:25 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Tue, 19 Sep 2006 16:20:25 -0000 Subject: [Bug 30766] Re: [acx111] default firmware not working for acx d-link dwl-g650+ References: <20060207221213.32736.87495.malonedeb@gandwana.ubuntu.com> Message-ID: <20060919162025.17606.959.malone@gandwana.ubuntu.com> Default for acx111 r16 and r17 will be 1.2.1.34 in next upload. May retroactively do this for dapper too. ** Changed in: linux-source-2.6.17 (Ubuntu) Sourcepackagename: linux-source-2.6.17 => linux-restricted-modules-2.6.17 Assignee: (unassigned) => Ben Collins Status: Unconfirmed => Fix Committed ** Changed in: linux-source-2.6.15 (Ubuntu) Sourcepackagename: linux-source-2.6.15 => linux-restricted-modules-2.6.15 Assignee: Ben Collins => (unassigned) Status: Fix Released => Confirmed -- [acx111] default firmware not working for acx d-link dwl-g650+ https://launchpad.net/bugs/30766 From cass at skynet.be Tue Sep 19 16:27:34 2006 From: cass at skynet.be (Guillaume Desmottes) Date: Tue, 19 Sep 2006 16:27:34 -0000 Subject: [Bug 31857] Re: r818x driver freezes randomly References: <20060218061331.1387.68568.malonedeb@gangotri.ubuntu.com> Message-ID: <20060919162734.23036.48508.malone@gangotri.ubuntu.com> I can confirm this very critic bug with a Edgy. Linux Haruhi 2.6.17-7-server #2 SMP Wed Sep 6 17:58:27 UTC 2006 i686 GNU/Linux -- r818x driver freezes randomly https://launchpad.net/bugs/31857 From bernat.tallaferro at gmail.com Tue Sep 19 16:40:04 2006 From: bernat.tallaferro at gmail.com (Bernat Tallaferro) Date: Tue, 19 Sep 2006 16:40:04 -0000 Subject: [Bug 60905] Re: [acx111] default firmware not working for acx d-link dwl-g650+ References: <20060917123837.28762.22746.malonedeb@gandwana.ubuntu.com> Message-ID: <20060919164005.23036.8554.launchpad@gangotri.ubuntu.com> *** This bug is a duplicate of bug 30766 *** ** This bug has been marked a duplicate of bug 30766 [acx111] default firmware not working for acx d-link dwl-g650+ -- [acx111] default firmware not working for acx d-link dwl-g650+ https://launchpad.net/bugs/60905 From bernat.tallaferro at gmail.com Tue Sep 19 16:40:04 2006 From: bernat.tallaferro at gmail.com (Bernat Tallaferro) Date: Tue, 19 Sep 2006 16:40:04 -0000 Subject: [Bug 30766] Re: [acx111] default firmware not working for acx d-link dwl-g650+ References: <20060207221213.32736.87495.malonedeb@gandwana.ubuntu.com> Message-ID: <20060919164005.23036.61867.launchpad@gangotri.ubuntu.com> ** Bug 60905 has been marked a duplicate of this bug -- [acx111] default firmware not working for acx d-link dwl-g650+ https://launchpad.net/bugs/30766 From michael.aye at gmx.net Tue Sep 19 16:53:35 2006 From: michael.aye at gmx.net (Maye) Date: Tue, 19 Sep 2006 16:53:35 -0000 Subject: [Bug 39315] Re: Keyboard random repeat and dropped key presses References: <20060412160910.15436.50293.malonedeb@gangotri.ubuntu.com> Message-ID: <20060919165335.17562.10925.malone@gandwana.ubuntu.com> some more info (before i unfortunately have to deleted this OS, b/c i need to stay productive... :S ) I tried the above mentioned kernel boot option, making sure it is used (editing the kopt line in grub interestingly does not put the option in the boot command line!!!). To no avail, no change in behaviour. (And why the heck does a change of /etc/inittab default boot level to 1 leave me with a freezing system at boot???) Maybe important: In the RESCUE boot (which I had to use to change back the inittab) the problem does NOT occur! If somebody wants anymore feedback, (s)he better be quick, as I said, I have to kick this off soon. I will wait til tomorrow though, considering different timezones... :) Regards, Michael -- Keyboard random repeat and dropped key presses https://launchpad.net/bugs/39315 From eric_quist at hotmail.com Tue Sep 19 16:47:30 2006 From: eric_quist at hotmail.com (qrusty) Date: Tue, 19 Sep 2006 16:47:30 -0000 Subject: [Bug 48395] Re: ipw3945 produces 99% cpu, making my laptop unusable References: <20060604183717.4978.25428.malonedeb@gandwana.ubuntu.com> Message-ID: <20060919164730.17606.2048.malone@gandwana.ubuntu.com> It turns out it didn't work with my work's sisco router. It started working, but promptly started freaking out. -- ipw3945 produces 99% cpu, making my laptop unusable https://launchpad.net/bugs/48395 From scott at ubuntu.com Tue Sep 19 16:56:59 2006 From: scott at ubuntu.com (Scott James Remnant) Date: Tue, 19 Sep 2006 16:56:59 -0000 Subject: [Bug 55539] Re: SD photo card no longer automounts References: <20060807192851.9092.18131.malonedeb@gangotri.ubuntu.com> Message-ID: <20060919165700.23036.23653.launchpad@gangotri.ubuntu.com> *** This bug is a duplicate of bug 30335 *** ** This bug has been marked a duplicate of bug 30335 mmc subsystem needs MODALIAS love -- SD photo card no longer automounts https://launchpad.net/bugs/55539 From bernat.tallaferro at gmail.com Tue Sep 19 16:47:36 2006 From: bernat.tallaferro at gmail.com (Bernat Tallaferro) Date: Tue, 19 Sep 2006 16:47:36 -0000 Subject: [Bug 60905] Re: [acx111] default firmware not working for acx d-link dwl-g650+ References: <20060917123837.28762.22746.malonedeb@gandwana.ubuntu.com> Message-ID: <20060919164736.23105.25457.malone@gangotri.ubuntu.com> *** This bug is a duplicate of bug 30766 *** Marked as a duplicate ** Changed in: linux-source-2.6.17 (Ubuntu) Status: Unconfirmed => Rejected -- [acx111] default firmware not working for acx d-link dwl-g650+ https://launchpad.net/bugs/60905 From scott at ubuntu.com Tue Sep 19 16:57:39 2006 From: scott at ubuntu.com (Scott James Remnant) Date: Tue, 19 Sep 2006 16:57:39 -0000 Subject: [Bug 30335] Re: mmc subsystem needs MODALIAS love References: <20060202181700.29619.56964.malonedeb@gangotri.ubuntu.com> Message-ID: <20060919165739.23036.280.malone@gangotri.ubuntu.com> We now have another example of why this is needed, bug #55539 is an SD card that is exposed through the MMC subsystem but needs a different set of drivers (tifm_*) Without MODALIAS, we can't do this ** Also affects: linux-source-2.6.17 (Ubuntu) Importance: Untriaged Status: Unconfirmed ** Bug 55539 has been marked a duplicate of this bug -- mmc subsystem needs MODALIAS love https://launchpad.net/bugs/30335 From bernat.tallaferro at gmail.com Tue Sep 19 17:23:00 2006 From: bernat.tallaferro at gmail.com (Bernat Tallaferro) Date: Tue, 19 Sep 2006 17:23:00 -0000 Subject: [Bug 30766] Re: [acx111] default firmware not working for acx d-link dwl-g650+ References: <20060207221213.32736.87495.malonedeb@gandwana.ubuntu.com> Message-ID: <20060919172300.17562.98950.malone@gandwana.ubuntu.com> It would be nice to have this bug fixed on the next dapper point release too, since now wireless does not work at all using the live cd on systems with cards with the TI acx chipset, and the bugfix seems relatively trivial. -- [acx111] default firmware not working for acx d-link dwl-g650+ https://launchpad.net/bugs/30766 From zulcss at gmail.com Tue Sep 19 17:38:23 2006 From: zulcss at gmail.com (ChuckShort) Date: Tue, 19 Sep 2006 17:38:23 -0000 Subject: [Bug 30335] Re: mmc subsystem needs MODALIAS love References: <20060202181700.29619.56964.malonedeb@gangotri.ubuntu.com> Message-ID: <20060919173823.17562.38571.malone@gandwana.ubuntu.com> I wouldn't mind taking a crack at this. chuck -- mmc subsystem needs MODALIAS love https://launchpad.net/bugs/30335 From ben.collins at ubuntu.com Tue Sep 19 17:40:56 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Tue, 19 Sep 2006 17:40:56 -0000 Subject: [Bug 35474] Re: Dapper - RT61 with wep key doesn't work References: <20060318161032.12254.27781.malonedeb@gandwana.ubuntu.com> Message-ID: <20060919174056.23105.17071.malone@gangotri.ubuntu.com> Newer rt2x00 is going into dapper. Hopefully this will improve rt61. ** Changed in: linux-source-2.6.17 (Ubuntu) Assignee: (unassigned) => Ben Collins Status: Needs Info => Fix Committed -- Dapper - RT61 with wep key doesn't work https://launchpad.net/bugs/35474 From mail at carthik.net Tue Sep 19 17:42:20 2006 From: mail at carthik.net (Carthik Sharma) Date: Tue, 19 Sep 2006 17:42:20 -0000 Subject: [Bug 36462] Re: optical mouse problem References: <20060324175400.6279.66012.malonedeb@gandwana.ubuntu.com> Message-ID: <20060919174220.23105.83296.malone@gangotri.ubuntu.com> tioantonio, Did you try this with the new kernel as Ben suggested above? Also, could you please provide the requested debug information (Which I repeat below): Could you please provide the output from lspci by going to Applications->Accessories->Terminal could you also run sudo gedit /etc/X11/xorg.conf and try to change the Section "InputDevice" Identifier "Mouse1" Driver "mouse" ... Option "Protocol" "Auto" to Section "InputDevice" Identifier "Mouse1" Driver "mouse" ... Option "Protocol" "PS/2" and then doing ctrl alt and backspace but be carfull to have no unsaved documents open because this will restart your graphic system. You can attach logs and files when you add a new comment. Thanks in advance. -- optical mouse problem https://launchpad.net/bugs/36462 From launchpad.listswill at recursor.net Tue Sep 19 18:04:12 2006 From: launchpad.listswill at recursor.net (willnapier) Date: Tue, 19 Sep 2006 18:04:12 -0000 Subject: [Bug 57502] Re: JMicron PATA/SATA Controller does not work References: <20060823192235.13463.13121.malonedeb@gandwana.ubuntu.com> Message-ID: <20060919180412.23105.58201.malone@gangotri.ubuntu.com> I bought a SATA DVD Writer to by-pass the problem. Samsung, 'Writemaster' SH-W163A DVD writer, which you can pick up online for GBP 25-30 in the UK. Be sure to buy a SATA cable and a molex to SATA converter so you can use the power. Not an elegant solution but good for the desperate. Except now I can't watch films because hdparm doesn't work with sata. -- JMicron PATA/SATA Controller does not work https://launchpad.net/bugs/57502 From ant.amarilli at free.fr Tue Sep 19 18:09:03 2006 From: ant.amarilli at free.fr (Antoine Amarilli) Date: Tue, 19 Sep 2006 18:09:03 -0000 Subject: [Bug 39315] Re: Keyboard random repeat and dropped key presses References: <20060412160910.15436.50293.malonedeb@gangotri.ubuntu.com> Message-ID: <20060919180903.17562.6493.malone@gandwana.ubuntu.com> Hello, I confirm that under an up-to-date Dapper, the problem is still present. I currently disable the acpi module at each boot (I did not took the time to automatise it), and wrote a little script that enables the module, outputs the battery status, and disables the module. This problem is not critical but it is still annoying. Could anybody help ? @+ Antoine. -- Keyboard random repeat and dropped key presses https://launchpad.net/bugs/39315 From gdh at acentral.co.uk Tue Sep 19 18:39:47 2006 From: gdh at acentral.co.uk (Gavin Hamill) Date: Tue, 19 Sep 2006 18:39:47 -0000 Subject: [Bug 61285] No image during bootup with DVI panel References: <20060919183947.17606.39530.malonedeb@gandwana.ubuntu.com> Message-ID: <20060919183947.17606.39530.malonedeb@gandwana.ubuntu.com> Public bug reported: Binary package hint: linux-image-2.6.15-27-686 I have a 19" Dell 1907FP 'UltraSharp' panel with both VGA+DVI inputs, and a Radeon X300 graphics card featuring one DVI and one VGA output. I have cables from each output running to the monitor. Very simply, if I have the panel in DVI mode, I see no Linux output on screen during boot between 'Uncompressing Linux...' and the gdm login screen. The panel only complains 'Unable to display this mode'. I cannot use any text console on ALT-Fx If I switch to analogue input, all is well and I can see the boot progress, and use text console on ALT-Fx if necessary. If I add vga=0x314 to the 'kernel' line in /boot/grub/menu.lst then all is well with both analogue + digital inputs, as well as a 'standard' [1] 800x600x16 bit display which scrolls quickly. Ref: http://ubuntuforums.org/showthread.php?p=1505142 What worries me is that having no output will confuse new users who think the system is broken. Worse still, if there IS a startup problem (xorg PCIe breakage, anybody?) , a new user connecting only through DVI will see no error messages, and have no facility to use a text console on ALT-Fx :( This is not a new behaviour introduced with the new kernel - only the new kernel having reset my grub menu.lst to defaults has reminded me to log this as a bug :) Cheers, Gavin. [1] By standard, I mean the minimum resolution that Windows XP will use for a desktop size. ** Affects: linux-source-2.6.15 (Ubuntu) Importance: Untriaged Status: Unconfirmed -- No image during bootup with DVI panel https://launchpad.net/bugs/61285 From edpizzi at gmail.com Tue Sep 19 18:49:54 2006 From: edpizzi at gmail.com (ed_p) Date: Tue, 19 Sep 2006 18:49:54 -0000 Subject: [Bug 34902] Re: Ralink Wireless USB/PCMCIA/PCI hangs PC References: <20060314143545.30082.52680.malonedeb@gandwana.ubuntu.com> Message-ID: <20060919184954.17562.30912.malone@gandwana.ubuntu.com> This seems to be a bug in the rt2570 module. Since you can also use ndiswrapper to drive these cards (at least those of us on intel boxes), there is a simple workaround: disable the rt2570 module. You can compile it out, or just add these two lines to your /etc/modprobe.d/blacklist: # use ndiswrapper instead for rt2x00 devices: rt2570 panics kernel blacklist rt2570 With rt2570 disabled, my device works as expected, appearing as the wlan0 interface (ndiswrapper), rather than rausb0 (rt2570). -- Ralink Wireless USB/PCMCIA/PCI hangs PC https://launchpad.net/bugs/34902 From ben.collins at ubuntu.com Tue Sep 19 19:10:17 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Tue, 19 Sep 2006 19:10:17 -0000 Subject: [Bug 36014] Re: kernel can't scale cpu frequency References: <20060322140248.30471.37870.malonedeb@gangotri.ubuntu.com> Message-ID: <20060919191017.23036.82700.malone@gangotri.ubuntu.com> No such thing as 2.6.17 in dapper. ** Changed in: linux-source-2.6.17 (Ubuntu Dapper) Status: Unconfirmed => Rejected -- kernel can't scale cpu frequency https://launchpad.net/bugs/36014 From ben.collins at ubuntu.com Tue Sep 19 19:24:07 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Tue, 19 Sep 2006 19:24:07 -0000 Subject: [Bug 37862] Re: kernel panic on IRQ allocation References: <20060403125606.25836.84932.malonedeb@gangotri.ubuntu.com> Message-ID: <20060919192407.17606.89.malone@gandwana.ubuntu.com> Please try one of the edgy dailys, from tomorrow or later. -- kernel panic on IRQ allocation https://launchpad.net/bugs/37862 From ben.collins at ubuntu.com Tue Sep 19 19:22:05 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Tue, 19 Sep 2006 19:22:05 -0000 Subject: [Bug 36619] Re: usb-mass storage disk isn't recognized the right way References: <20060325183618.6253.2445.malonedeb@gandwana.ubuntu.com> Message-ID: <20060919192206.17606.87077.malone@gandwana.ubuntu.com> Fixes related to this went into dapper-security. Please test it. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Unconfirmed => Fix Released -- usb-mass storage disk isn't recognized the right way https://launchpad.net/bugs/36619 From ben.collins at ubuntu.com Tue Sep 19 19:22:51 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Tue, 19 Sep 2006 19:22:51 -0000 Subject: [Bug 36014] Re: kernel can't scale cpu frequency References: <20060322140248.30471.37870.malonedeb@gangotri.ubuntu.com> Message-ID: <20060919192251.23105.24576.malone@gangotri.ubuntu.com> Please test 2.6.17-8.22, which should be in the archive now. -- kernel can't scale cpu frequency https://launchpad.net/bugs/36014 From ben.collins at ubuntu.com Tue Sep 19 19:26:50 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Tue, 19 Sep 2006 19:26:50 -0000 Subject: [Bug 38589] Re: Dapper flight6: availble kernels selection References: <20060407115633.24516.55871.malonedeb@gangotri.ubuntu.com> Message-ID: <20060919192650.17562.95582.launchpad@gandwana.ubuntu.com> ** Changed in: debian-installer (Ubuntu) Status: Unconfirmed => Fix Released -- Dapper flight6: availble kernels selection https://launchpad.net/bugs/38589 From francis.lacoste at contre.com Tue Sep 19 19:44:40 2006 From: francis.lacoste at contre.com (Francis J. Lacoste) Date: Tue, 19 Sep 2006 19:44:40 -0000 Subject: [Bug 56894] Re: WLAN disconnects repeatedly from AP when using WPA on a SMP machine References: <20060819114944.23623.69369.malonedeb@gandwana.ubuntu.com> Message-ID: <20060919194441.17606.80953.malone@gandwana.ubuntu.com> I'm running Dapper on a Dell Inspiron 640m with the same ipw3945 driver. My Access point is a LinkSys configured with an hidden SSID and WEP. After installing the latest updates, I'm having a similar issue. With linux-image-2.6.15-26-686 (2.6.15-26.47) and linux-restricted- modules-2.6.15-26-686 (2.6.15.11-4), I'm unable to stay connected to the AP. It connects and then deconnects after 10-30s. I have to do a ifup/ifdown to reconnect. With linux-image.2.6.15-27-686 (2.6.15-27.48) and linux-restricted- modules-2.6.15-27-686 (2.5.15.11-5), I am not able to connect at all to the AP. Downgrading back to linux-image-2.6.15-26-686 (2.6.15-26.46) and linux- restricted-modules-2.6.15-26-686 (2.6.15.11-3) makes everything works as before. (This may be a different issue.) I read from the 2.6.15-26.47 changelog that it included a fix for a WEP race, that's why I'm reporting this here, since it seems to be the most logical culprit. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Fix Committed => Confirmed -- WLAN disconnects repeatedly from AP when using WPA on a SMP machine https://launchpad.net/bugs/56894 From ben.collins at ubuntu.com Tue Sep 19 19:44:26 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Tue, 19 Sep 2006 19:44:26 -0000 Subject: [Bug 47489] Re: today's update (May 30) blocked my laptop References: <20060530130738.2224.52062.malonedeb@gangotri.ubuntu.com> Message-ID: <20060919194426.17562.23244.malone@gandwana.ubuntu.com> Is your bug exactly like one of the two you listed? If so, please mark this one a duplicate of that one. That will subscribe you to that one. The other bug reports seem to have a lot more information than this one. -- today's update (May 30) blocked my laptop https://launchpad.net/bugs/47489 From francis.lacoste at contre.com Tue Sep 19 19:55:10 2006 From: francis.lacoste at contre.com (Francis J. Lacoste) Date: Tue, 19 Sep 2006 19:55:10 -0000 Subject: [Bug 56894] Re: WLAN disconnects repeatedly from AP when using WPA on a SMP machine References: <20060819114944.23623.69369.malonedeb@gandwana.ubuntu.com> Message-ID: <20060919195510.23036.44907.malone@gangotri.ubuntu.com> In the previous message, the "This may be a different issue." comment applies to the paragraph about 2.6.15-27.48. So it should read: With linux-image.2.6.15-27-686 (2.6.15-27.48) and linux-restricted- modules-2.6.15-27-686 (2.5.15.11-5), I am not able to connect at all to the AP. (This may be a different issue.) Downgrading back to linux-image-2.6.15-26-686 (2.6.15-26.46) and linux- restricted-modules-2.6.15-26-686 (2.6.15.11-3) makes everything works as before. -- WLAN disconnects repeatedly from AP when using WPA on a SMP machine https://launchpad.net/bugs/56894 From launchpad at aexl.de Tue Sep 19 20:11:35 2006 From: launchpad at aexl.de (aexl) Date: Tue, 19 Sep 2006 20:11:35 -0000 Subject: [Bug 51363] Re: Desparately looking for a fix References: <20060630005047.17054.66852.malonedeb@gangotri.ubuntu.com> Message-ID: <20060919201135.23105.89577.malone@gangotri.ubuntu.com> On this thread: http://forums.fedoraforum.org/forum/showthread.php?t=105185&highlight=nvnet it seems like some guy solved a similar problem with some kind of kernel module parameter magic that i am not capable of... How can we use this for a fix? -- VMWare networking extremely slow https://launchpad.net/bugs/51363 From launchpad at aexl.de Tue Sep 19 20:08:57 2006 From: launchpad at aexl.de (aexl) Date: Tue, 19 Sep 2006 20:08:57 -0000 Subject: [Bug 51363] Desparately looking for a fix References: <20060630005047.17054.66852.malonedeb@gangotri.ubuntu.com> Message-ID: <20060919200857.23036.31556.malone@gangotri.ubuntu.com> I have the same problem, but the fix from donald does not work for me: $ ethtool -K eth0 tso off Cannot set device tcp segmentation offload settings: Operation not permitted What can i do? -- VMWare networking extremely slow https://launchpad.net/bugs/51363 From tenshu at gmail.com Tue Sep 19 20:20:18 2006 From: tenshu at gmail.com (tenshu) Date: Tue, 19 Sep 2006 20:20:18 -0000 Subject: [Bug 35474] Re: Dapper - RT61 with wep key doesn't work References: <20060318161032.12254.27781.malonedeb@gandwana.ubuntu.com> Message-ID: <20060919202018.17562.40664.malone@gandwana.ubuntu.com> great news i'll test it ASAP Thanks again Ben -- Dapper - RT61 with wep key doesn't work https://launchpad.net/bugs/35474 From ben.collins at ubuntu.com Tue Sep 19 20:34:39 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Tue, 19 Sep 2006 20:34:39 -0000 Subject: [Bug 55063] Re: reiserfs crash during install References: <20060803152543.5063.66495.malonedeb@gandwana.ubuntu.com> Message-ID: <20060919203439.17606.74860.launchpad@gandwana.ubuntu.com> ** Summary changed: - Installer crashed + reiserfs crash during install ** Tags added: reiserfs -- reiserfs crash during install https://launchpad.net/bugs/55063 From ben.collins at ubuntu.com Tue Sep 19 20:39:36 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Tue, 19 Sep 2006 20:39:36 -0000 Subject: [Bug 56878] Re: No more sound (VIA 8233) in Dapper after upgrade from Breezy References: <20060819061811.12543.25978.malonedeb@gangotri.ubuntu.com> Message-ID: <20060919203936.23105.80883.malone@gangotri.ubuntu.com> That's been fixed. Also, the problem with the symbol changes. If you are compiling your own drivers, chances are you will have to recompile it periodically as new versions of the kernel come out. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Needs Info => Rejected -- No more sound (VIA 8233) in Dapper after upgrade from Breezy https://launchpad.net/bugs/56878 From ben.collins at ubuntu.com Tue Sep 19 20:42:04 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Tue, 19 Sep 2006 20:42:04 -0000 Subject: [Bug 57502] Re: JMicron PATA/SATA Controller does not work References: <20060823192235.13463.13121.malonedeb@gandwana.ubuntu.com> Message-ID: <20060919204204.17606.96418.malone@gandwana.ubuntu.com> Fixed kernel is in two places: 1) dapper-proposed 2) edgy main Choose your desired route. Tomorrow, we should have edgy daily ISO's with this new kernel. -- JMicron PATA/SATA Controller does not work https://launchpad.net/bugs/57502 From ben.collins at ubuntu.com Tue Sep 19 20:44:30 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Tue, 19 Sep 2006 20:44:30 -0000 Subject: [Bug 57265] Re: Return value of slave_configure in scsi_scan.c is ignored References: <20060822122546.13507.11556.malonedeb@gandwana.ubuntu.com> Message-ID: <20060919204430.23036.12319.malone@gangotri.ubuntu.com> Will get added to dapper (via the dapper-proposed branch) soon. Thanks. ** Changed in: linux-source-2.6.15 (Ubuntu) Assignee: (unassigned) => Ben Collins Status: Unconfirmed => Fix Committed Target: None => dapper-updates -- Return value of slave_configure in scsi_scan.c is ignored https://launchpad.net/bugs/57265 From gtaylor at clemson.edu Tue Sep 19 20:51:46 2006 From: gtaylor at clemson.edu (Greg Taylor) Date: Tue, 19 Sep 2006 20:51:46 -0000 Subject: [Bug 55532] Re: ipw2200 not working: "Failed to send TX_POWER" References: <20060807184658.9299.6302.malonedeb@gandwana.ubuntu.com> Message-ID: <20060919205146.17606.98626.malone@gandwana.ubuntu.com> Is there anything else I can provide to assist in troubleshooting? The problem remains in the latest Edgy. -- ipw2200 not working: "Failed to send TX_POWER" https://launchpad.net/bugs/55532 From ben.collins at ubuntu.com Tue Sep 19 20:59:37 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Tue, 19 Sep 2006 20:59:37 -0000 Subject: [Bug 56878] Re: No more sound (VIA 8233) in Dapper after upgrade from Breezy References: <20060819061811.12543.25978.malonedeb@gangotri.ubuntu.com> Message-ID: <20060919205937.17562.83156.launchpad@gandwana.ubuntu.com> ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Rejected => Needs Info -- No more sound (VIA 8233) in Dapper after upgrade from Breezy https://launchpad.net/bugs/56878 From d.tournier at brain.org.au Tue Sep 19 23:24:32 2006 From: d.tournier at brain.org.au (donald) Date: Tue, 19 Sep 2006 23:24:32 -0000 Subject: [Bug 51363] Re: VMWare networking extremely slow References: <20060630005047.17054.66852.malonedeb@gangotri.ubuntu.com> Message-ID: <20060919232433.23105.64684.malone@gangotri.ubuntu.com> Hi aexl, In order for the ethtool command to work, you need root privileges. Try using sudo: $ sudo ethtool -K eth0 tso off That should work. BUT: the more recent patched kernels from Ubuntu do not have that problem anymore (at least for me). If you make sure your system is up to date with the latest fixes, the problem should go away without needing to use the ethtool fix. Try a full update first. If it still doesn't work, then try the ethtool fix. Beyond that, I'm not sure what you could do... -- VMWare networking extremely slow https://launchpad.net/bugs/51363 From ben.collins at ubuntu.com Tue Sep 19 23:29:03 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Tue, 19 Sep 2006 23:29:03 -0000 Subject: [Bug 60893] Re: Server Kernel update (47) prevents booting! References: <20060917092936.28941.75352.malonedeb@gandwana.ubuntu.com> Message-ID: <20060919232904.23036.38329.malone@gangotri.ubuntu.com> Looks to me like the initramfs wasn't created correctly. Please boot from an older kernel, and run: sudo update-initramfs -u -k 2.6.15-26-server Make sure this runs without error. Note the message you see in dmesg confirms that the initramfs is not valid. If this appears to be a bug in the creation of this (e.g. not just a failure on the system like running out of disk space), open a target for this bug against initramfs-tools. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Unconfirmed => Rejected -- Server Kernel update (47) prevents booting! https://launchpad.net/bugs/60893 From frlinux at gmail.com Tue Sep 19 23:34:55 2006 From: frlinux at gmail.com (FRLinux) Date: Tue, 19 Sep 2006 23:34:55 -0000 Subject: [Bug 37862] Re: kernel panic on IRQ allocation References: <20060403125606.25836.84932.malonedeb@gangotri.ubuntu.com> Message-ID: <20060919233455.17606.2613.malone@gandwana.ubuntu.com> Thanks a lot, the laptop is going away on friday, so i'll give it a shot before then. -- kernel panic on IRQ allocation https://launchpad.net/bugs/37862 From launchpad at aexl.de Tue Sep 19 23:49:33 2006 From: launchpad at aexl.de (aexl) Date: Tue, 19 Sep 2006 23:49:33 -0000 Subject: [Bug 51363] Re: VMWare networking extremely slow References: <20060630005047.17054.66852.malonedeb@gangotri.ubuntu.com> Message-ID: <20060919234933.17562.53456.malone@gandwana.ubuntu.com> Hi donald, thank you for your comments. Unfortunately this does not help me: - i use the latest kernel $ uname -r 2.6.15-26-386 - in fact i did use sudo (my wrong citation) $ sudo ethtool -K eth0 tso off Cannot set device tcp segmentation offload settings: Operation not supported my network module is $ sudo ethtool -i eth0 driver: ipw2200 version: 1.1.1 firmware-version: ABG:9.0.2.6 (Mar 22 2005) bus-info: 0000:06:05.0 -- VMWare networking extremely slow https://launchpad.net/bugs/51363 From michael.aye at gmx.net Wed Sep 20 00:09:45 2006 From: michael.aye at gmx.net (Maye) Date: Wed, 20 Sep 2006 00:09:45 -0000 Subject: [Bug 39315] Re: Keyboard random repeat and dropped key presses References: <20060412160910.15436.50293.malonedeb@gangotri.ubuntu.com> Message-ID: <20060920000945.17606.35141.malone@gandwana.ubuntu.com> Oh bummer, bugger, blimey... :( I found my culprit: It's the tleds package! How did I found out: At home I go online via WLAN, no keystrokes missing. That made me think. I remembered darkly from yesterdays installation of Dapper and browsing through software, that the tleds packages mentions a VERY RARE occurence of unusable keyboards while using tleds, but only for older laptops e.g Thinkpad 600 and some HP laptop or laptops with overly long cables. So I thought, come on, a Thinkpad like my R51 will be properly designed, shouldn't be a prob. Well, turns out, that this is not true. tleds by default only monitors only eth0. That's why I did not see any missing keystrokes now using the WLAN via eth1. To confirm I connected to my router via cable and switched off eth1. First there was no problem, but when I increased the netload by using a NASA TV stream like I had it at work this afternoon, I reproduced the bug very clearly. So, everybody, check if you also like me, couldn't resist the geekiness of tleds and installed this semi-useful program. ;) I'm glad now, that I can stay with Kubuntu for now. Yeah! So, please cancel my confirmation of this bug and sorry for the noise. Regards, Michael -- Keyboard random repeat and dropped key presses https://launchpad.net/bugs/39315 From ben.collins at ubuntu.com Wed Sep 20 00:20:37 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Wed, 20 Sep 2006 00:20:37 -0000 Subject: [Bug 60999] Re: /lib/firmware/acx/2.6.15-26-386/acx/default wrong References: <20060918051356.28890.41849.malonedeb@gangotri.ubuntu.com> Message-ID: <20060920002037.23105.59346.launchpad@gangotri.ubuntu.com> *** This bug is a duplicate of bug 30766 *** ** This bug has been marked a duplicate of bug 30766 [acx111] default firmware not working for acx d-link dwl-g650+ -- /lib/firmware/acx/2.6.15-26-386/acx/default wrong https://launchpad.net/bugs/60999 From ben.collins at ubuntu.com Wed Sep 20 00:20:19 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Wed, 20 Sep 2006 00:20:19 -0000 Subject: [Bug 57682] Re: ASUS A3L and wireless D-Link DWL-G650+ Airplus References: <20060825100244.5577.90740.malonedeb@gandwana.ubuntu.com> Message-ID: <20060920002019.23105.98898.launchpad@gangotri.ubuntu.com> *** This bug is a duplicate of bug 30766 *** ** This bug is no longer a duplicate of bug 17497 Does not support rev.B1 of DLink DWL-G650+ (missing firmware) ** This bug has been marked a duplicate of bug 30766 [acx111] default firmware not working for acx d-link dwl-g650+ -- ASUS A3L and wireless D-Link DWL-G650+ Airplus https://launchpad.net/bugs/57682 From ben.collins at ubuntu.com Wed Sep 20 00:21:20 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Wed, 20 Sep 2006 00:21:20 -0000 Subject: [Bug 48376] Re: Linksys WPC54G v2 Incorrect Firmware References: <20060604153800.5009.72387.malonedeb@gandwana.ubuntu.com> Message-ID: <20060920002120.23036.10445.launchpad@gangotri.ubuntu.com> *** This bug is a duplicate of bug 30766 *** ** This bug has been marked a duplicate of bug 30766 [acx111] default firmware not working for acx d-link dwl-g650+ -- Linksys WPC54G v2 Incorrect Firmware https://launchpad.net/bugs/48376 From ben.collins at ubuntu.com Wed Sep 20 00:21:30 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Wed, 20 Sep 2006 00:21:30 -0000 Subject: [Bug 45983] Re: [acx111] D-link G650+ References: <20060522121632.23797.33858.malonedeb@gandwana.ubuntu.com> Message-ID: <20060920002130.17562.29871.launchpad@gandwana.ubuntu.com> *** This bug is a duplicate of bug 30766 *** ** This bug has been marked a duplicate of bug 30766 [acx111] default firmware not working for acx d-link dwl-g650+ -- [acx111] D-link G650+ https://launchpad.net/bugs/45983 From ben.collins at ubuntu.com Wed Sep 20 00:21:47 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Wed, 20 Sep 2006 00:21:47 -0000 Subject: [Bug 44588] Re: [acx111] wrong firmware image for d-link dwl g650+ References: <20060513191720.15819.32832.malonedeb@gangotri.ubuntu.com> Message-ID: <20060920002147.17562.38900.launchpad@gandwana.ubuntu.com> *** This bug is a duplicate of bug 30766 *** ** This bug has been marked a duplicate of bug 30766 [acx111] default firmware not working for acx d-link dwl-g650+ -- [acx111] wrong firmware image for d-link dwl g650+ https://launchpad.net/bugs/44588 From ben.collins at ubuntu.com Wed Sep 20 00:22:50 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Wed, 20 Sep 2006 00:22:50 -0000 Subject: [Bug 41968] Re: Wrong firmware loaded for acx driver References: <20060428210819.29040.89210.malonedeb@gandwana.ubuntu.com> Message-ID: <20060920002250.17562.70701.launchpad@gandwana.ubuntu.com> *** This bug is a duplicate of bug 30766 *** ** This bug has been marked a duplicate of bug 30766 [acx111] default firmware not working for acx d-link dwl-g650+ -- Wrong firmware loaded for acx driver https://launchpad.net/bugs/41968 From ben.collins at ubuntu.com Wed Sep 20 00:22:38 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Wed, 20 Sep 2006 00:22:38 -0000 Subject: [Bug 42896] Re: Dapper asks for non existing firmware tiacx100c11 and reports I/O timing issues References: <20060504081258.24599.69270.malonedeb@gandwana.ubuntu.com> Message-ID: <20060920002239.17606.57790.launchpad@gandwana.ubuntu.com> ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Unconfirmed => Fix Released -- Dapper asks for non existing firmware tiacx100c11 and reports I/O timing issues https://launchpad.net/bugs/42896 From ben.collins at ubuntu.com Wed Sep 20 00:23:21 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Wed, 20 Sep 2006 00:23:21 -0000 Subject: [Bug 35249] Re: acx firmware are not available for the driver References: <20060316214346.6537.84979.malonedeb@gangotri.ubuntu.com> Message-ID: <20060920002321.17606.52836.launchpad@gandwana.ubuntu.com> *** This bug is a duplicate of bug 30766 *** ** This bug has been marked a duplicate of bug 30766 [acx111] default firmware not working for acx d-link dwl-g650+ -- acx firmware are not available for the driver https://launchpad.net/bugs/35249 From ben.collins at ubuntu.com Wed Sep 20 00:24:14 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Wed, 20 Sep 2006 00:24:14 -0000 Subject: [Bug 32602] Re: Wrong firmware selected for a acx111 card References: <20060223131001.14968.23308.malonedeb@gangotri.ubuntu.com> Message-ID: <20060920002414.17606.72790.launchpad@gandwana.ubuntu.com> *** This bug is a duplicate of bug 30766 *** ** This bug has been marked a duplicate of bug 30766 [acx111] default firmware not working for acx d-link dwl-g650+ -- Wrong firmware selected for a acx111 card https://launchpad.net/bugs/32602 From ben.collins at ubuntu.com Wed Sep 20 00:20:19 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Wed, 20 Sep 2006 00:20:19 -0000 Subject: [Bug 30766] Re: [acx111] default firmware not working for acx d-link dwl-g650+ References: <20060207221213.32736.87495.malonedeb@gandwana.ubuntu.com> Message-ID: <20060920002019.23105.11496.launchpad@gangotri.ubuntu.com> ** Bug 57682 has been marked a duplicate of this bug ** Bug 60999 has been marked a duplicate of this bug ** Bug 48376 has been marked a duplicate of this bug ** Bug 45983 has been marked a duplicate of this bug ** Bug 44588 has been marked a duplicate of this bug ** Bug 41968 has been marked a duplicate of this bug ** Bug 35249 has been marked a duplicate of this bug ** Bug 32602 has been marked a duplicate of this bug ** Bug 17497 has been marked a duplicate of this bug ** Bug 22195 has been marked a duplicate of this bug ** Bug 23787 has been marked a duplicate of this bug -- [acx111] default firmware not working for acx d-link dwl-g650+ https://launchpad.net/bugs/30766 From ben.collins at ubuntu.com Wed Sep 20 00:24:40 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Wed, 20 Sep 2006 00:24:40 -0000 Subject: [Bug 22195] Re: acx_111 pcmcia not working References: <20060113141656.21012.31766.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060920002440.17606.7564.launchpad@gandwana.ubuntu.com> *** This bug is a duplicate of bug 30766 *** ** This bug has been marked a duplicate of bug 30766 [acx111] default firmware not working for acx d-link dwl-g650+ -- acx_111 pcmcia not working https://launchpad.net/bugs/22195 From ben.collins at ubuntu.com Wed Sep 20 00:24:55 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Wed, 20 Sep 2006 00:24:55 -0000 Subject: [Bug 23787] Re: Wrong firmware loaded for acx_pci References: <20060113142541.21012.73152.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060920002455.23036.16508.launchpad@gangotri.ubuntu.com> *** This bug is a duplicate of bug 30766 *** ** This bug has been marked a duplicate of bug 30766 [acx111] default firmware not working for acx d-link dwl-g650+ -- Wrong firmware loaded for acx_pci https://launchpad.net/bugs/23787 From ben.collins at ubuntu.com Wed Sep 20 00:24:25 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Wed, 20 Sep 2006 00:24:25 -0000 Subject: [Bug 17497] Re: Does not support rev.B1 of DLink DWL-G650+ (missing firmware) References: <20060113135153.21012.79669.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060920002425.17606.65961.launchpad@gandwana.ubuntu.com> *** This bug is a duplicate of bug 30766 *** ** This bug has been marked a duplicate of bug 30766 [acx111] default firmware not working for acx d-link dwl-g650+ -- Does not support rev.B1 of DLink DWL-G650+ (missing firmware) https://launchpad.net/bugs/17497 From d.tournier at brain.org.au Wed Sep 20 00:29:22 2006 From: d.tournier at brain.org.au (donald) Date: Wed, 20 Sep 2006 00:29:22 -0000 Subject: [Bug 51363] Re: VMWare networking extremely slow References: <20060630005047.17054.66852.malonedeb@gangotri.ubuntu.com> Message-ID: <20060920002922.17562.31050.malone@gandwana.ubuntu.com> Hi aexl, Sounds like your Intel Pro/Wireless card driver is to blame, and doesn't support turning off TSO on the fly. You'll probably need to set the module parameters as in the Fedora forum, but I have no idea what the parameters should be, or where they should go. Unfortunately, the Fedora guy's NIC is an NVidia nForce NIC, so the settings will probably be different. Only thing I can recommend is getting in touch with the developers of the ipw2200 driver - look on their website for details: http://ipw2200.sourceforge.net/ That's about as much help as I can offer. Sorry... -- VMWare networking extremely slow https://launchpad.net/bugs/51363 From luke.hoersten at gmail.com Wed Sep 20 01:05:09 2006 From: luke.hoersten at gmail.com (Luke Hoersten) Date: Wed, 20 Sep 2006 01:05:09 -0000 Subject: [Bug 52553] Re: Kernel panic - not syncing: IO-APIC + timer doesn't work! References: <20060710155757.27312.91477.malonedeb@gangotri.ubuntu.com> Message-ID: <20060920010509.23105.39618.malone@gangotri.ubuntu.com> "Hi, This seems to be te cause of the “APIC kernel panics”: http://llistes.bulma.net/pipermail/bulmailing/Week-of- Mon-20060703/077657.html (it’s in spanish) According to the above link, recompiling the kernel to use a timing frequency of 1000 Hz instead of the 250 Hz solves the “panic” problem. You can install the “linux-source-2.6.15″ package and follow the instructions here to build the kernel: http://ubuntuforums.org/archive/index.php/t-24853.html (Note that you have to add a “–initrd” switch in the “make-kpkg” command to make it generate an “initd.img” and make the kernel boot properly) The problem is that the restricted modules won`t be installed with this new kernel, and this includes the “madwifi” driver for the wifi… So you have to add it. Greetings, Marco. " This is a comment on the site: http://bin-false.org/?p=17 If you search the page for "APIC," many many people are having this problem? Is there any way we can get the status of this bug updated? -- Kernel panic - not syncing: IO-APIC + timer doesn't work! https://launchpad.net/bugs/52553 From pedro at pedrocr.net Wed Sep 20 01:30:14 2006 From: pedro at pedrocr.net (=?utf-8?q?Pedro_C=C3=B4rte-Real?=) Date: Wed, 20 Sep 2006 01:30:14 -0000 Subject: [Bug 59569] Re: snd_hda_intel driver provides only playback on macbook References: <20060908203243.16587.39934.malonedeb@gangotri.ubuntu.com> Message-ID: <20060920013014.17562.78532.malone@gandwana.ubuntu.com> I confirm this bug on my white 2.0 ghz macbook. -- snd_hda_intel driver provides only playback on macbook https://launchpad.net/bugs/59569 From ben.collins at ubuntu.com Wed Sep 20 01:40:27 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Wed, 20 Sep 2006 01:40:27 -0000 Subject: [Bug 31926] Re: Nidiswrapper / acx_pci conflict. References: <20060218233809.833.64474.malonedeb@gandwana.ubuntu.com> Message-ID: <20060920014027.23036.11469.malone@gangotri.ubuntu.com> The "conflict" is not a valid bug. If you still have problems with the card using the acx driver, open another bug report. Thanks ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Needs Info => Rejected -- Nidiswrapper / acx_pci conflict. https://launchpad.net/bugs/31926 From john.dong at gmail.com Wed Sep 20 01:48:22 2006 From: john.dong at gmail.com (John Dong) Date: Wed, 20 Sep 2006 01:48:22 -0000 Subject: [Bug 61342] Backport Intel 965 Express chipset support from 2.6.18 References: <20060920014823.23036.85753.malonedeb@gangotri.ubuntu.com> Message-ID: <20060920014823.23036.85753.malonedeb@gangotri.ubuntu.com> Public bug reported: http://kerneltrap.org/node/7020 This thread on Kerneltrap seems kind of concerning to me. The second reply lists a set of changesets required for the 965Express chipset to work with Linux, all of which come from Linus's 2.6 git repository. I've searched our Ubuntu git repositories, and it doesn't seem like we have all of thse patches. We seem to have some of them, like the e1000 (I think) and ALSA but not the others. Given that the Core 2 Duos are rising in popularity and this is one of the hottest mobo chipsets to use with these CPU's, I think it's important for both Edgy and Dapper to gain support for this chipset, if feasible. ** Affects: linux-source-2.6.15 (Ubuntu) Importance: Untriaged Status: Unconfirmed ** Affects: linux-source-2.6.17 (Ubuntu) Importance: Untriaged Status: Unconfirmed ** Also affects: linux-source-2.6.15 (Ubuntu) Importance: Untriaged Status: Unconfirmed -- Backport Intel 965 Express chipset support from 2.6.18 https://launchpad.net/bugs/61342 From ben.collins at ubuntu.com Wed Sep 20 02:08:20 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Wed, 20 Sep 2006 02:08:20 -0000 Subject: [Bug 61231] Re: Kernel reverted to 386 version References: <20060919092306.28941.7471.malonedeb@gandwana.ubuntu.com> Message-ID: <20060920020820.17606.11841.malone@gandwana.ubuntu.com> This really makes no sense to me. Technically this should not even be possible unless you did something strange with your system. First off, the -386 package is not available from the amd64 repository. There's no way synaptic should have even seen it. Secondly, even if you did install the -386 kernel on an 64-bit system, it would not boot, simply because the 32-bit -386 kernel would not be able to run the x86_64 binaries. So my guess is that you somehow manually installed the 64-bit kernel at some point and are now getting hosed by an upgrade that is setting your system back correctly. What I need from you is the output of the following commands: dpkg --print-architecture uname -a ls -l /boot/. file -L /lib/libc.so.6 dpkg -l | grep linux Send this in a follow up comment. Thanks. ** Changed in: linux-meta (Ubuntu) Status: Unconfirmed => Needs Info -- Kernel reverted to 386 version https://launchpad.net/bugs/61231 From ben.collins at ubuntu.com Wed Sep 20 02:29:55 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Wed, 20 Sep 2006 02:29:55 -0000 Subject: [Bug 61342] Re: Backport Intel 965 Express chipset support from 2.6.18 References: <20060920014823.23036.85753.malonedeb@gangotri.ubuntu.com> Message-ID: <20060920022955.23036.28670.malone@gangotri.ubuntu.com> We are targeting Core 2 Duo's at Edgy. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Unconfirmed => Rejected -- Backport Intel 965 Express chipset support from 2.6.18 https://launchpad.net/bugs/61342 From ben.collins at ubuntu.com Wed Sep 20 02:30:30 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Wed, 20 Sep 2006 02:30:30 -0000 Subject: [Bug 61342] Re: Backport Intel 965 Express chipset support from 2.6.18 References: <20060920014823.23036.85753.malonedeb@gangotri.ubuntu.com> Message-ID: <20060920023030.23105.54247.malone@gangotri.ubuntu.com> Merged the ata_piix changeset (the only one not merged in that list). ** Changed in: linux-source-2.6.17 (Ubuntu) Importance: Untriaged => Medium Assignee: (unassigned) => Ben Collins Status: Unconfirmed => Fix Committed -- Backport Intel 965 Express chipset support from 2.6.18 https://launchpad.net/bugs/61342 From jason at xio.com Wed Sep 20 02:45:28 2006 From: jason at xio.com (xiojason) Date: Wed, 20 Sep 2006 02:45:28 -0000 Subject: [Bug 44599] Re: IDE crash on inserting PCMCIA IDE device References: <20060513200340.15819.65877.malonedeb@gangotri.ubuntu.com> Message-ID: <20060920024528.17606.9473.malone@gandwana.ubuntu.com> I'm seeing the same basic problem on my IBM Thinkpad T40 running 2.6.15-27-686 #1 SMP PREEMPT Sat Sep 16 02:13:27 UTC 2006 i686 GNU/Linux. If the IDE device (CF card) is inserted at boot, the device works ok. If ejected and reinserted, this Oops occurs: pccard: card ejected from slot 0 enabled 0001 pccard: PCMCIA card inserted into slot 0 pcmcia: registering new device pcmcia0.0 Probing IDE interface ide2... hde: Flash Card, CFA DISK drive ide2 at 0x4100-0x4107,0x410e on irq 3 hde: max request size: 128KiB hde: 4062240 sectors (2079 MB) w/0KiB Cache, CHS=4030/16/63 hde: cache flushes not supported hde: hde1 Unable to handle kernel NULL pointer dereference at virtual address 00000078 printing eip: c01bcb83 *pde = 00000000 Oops: 0002 [#1] PREEMPT SMP Modules linked in: rfcomm l2cap nvram uinput ppdev speedstep_centrino cpufreq_userspace cpufreq_stats freq_table cpufreq_powersave cpufreq_ondemand cpufreq_conservative video tc1100_wmi sony_acpi pcc_acpi ibm_acpi hotkey dev_acpi container button acpi_sbs battery ac i2c_acpi_ec i2c_core nls_iso8859_1 nls_cp437 vfat ipv6 fat dm_mod md_mod fglrx lp af_packet arc4 ieee80211_crypt_wep ide_cs pcmcia joydev tsdev ipw2100 ieee80211 ieee80211_crypt e1000 irtty_sir snd_intel8x0 yenta_socket rsrc_nonstatic pcmcia_core sir_dev nsc_ircc hci_usb snd_ac97_codec snd_ac97_bus irda bluetooth snd_pcm_oss snd_mixer_oss crc_ccitt pcspkr parport_pc parport psmouse floppy serio_raw snd_pcm snd_timer snd soundcore snd_page_alloc intel_agp agpgart shpchp pci_hotplug evdev ext3 jbd ide_generic ehci_hcd uhci_hcd usbcore ide_disk piix generic thermal processor fan capability commoncap vga16fb vgastate fbcon tileblit font bitblit softcursor CPU: 0 EIP: 0060:[create_dir+35/464] Tainted: P VLI EFLAGS: 00210286 (2.6.15-27-686) EIP is at create_dir+0x23/0x1d0 eax: f79a3a18 ebx: f6e311d4 ecx: c0326677 edx: 00000000 esi: f6e311d0 edi: f79c5450 ebp: f7a7f93c esp: f7a7f900 ds: 007b es: 007b ss: 0068 Process pccardd (pid: 3155, threadinfo=f7a7e000 task=f7a9ba90) Stack: c01b571b f75c10c0 00000001 00000001 ffffffff f6e311d7 f6e311d0 f6e311d0 f79c5450 f79c53c0 c01bcd96 f6e311d0 f79a3a18 f6e311d4 f7a7f93c 00000000 00000000 c01f92ef f6e311d0 f6e311d0 fffffffe c01f95ad f6e311d0 f6e311d0 Call Trace: [read_dev_sector+155/208] read_dev_sector+0x9b/0xd0 [sysfs_create_dir+54/128] sysfs_create_dir+0x36/0x80 [create_dir+31/96] create_dir+0x1f/0x60 [kobject_add+125/224] kobject_add+0x7d/0xe0 [kobject_register+40/128] kobject_register+0x28/0x80 [add_partition+207/288] add_partition+0xcf/0x120 [rescan_partitions+282/368] rescan_partitions+0x11a/0x170 [do_open+861/960] do_open+0x35d/0x3c0 [acpi_os_acquire_object+29/74] acpi_os_acquire_object+0x1d/0x4a [blkdev_get+148/192] blkdev_get+0x94/0xc0 [register_disk+193/224] register_disk+0xc1/0xe0 [add_disk+73/96] add_disk+0x49/0x60 [exact_match+0/16] exact_match+0x0/0x10 [exact_lock+0/32] exact_lock+0x0/0x20 [pg0+943933151/1069167616] ide_disk_probe+0x14f/0x18b [ide_disk] [driver_probe_device+84/240] driver_probe_device+0x54/0xf0 [__device_attach+0/16] __device_attach+0x0/0x10 [bus_for_each_drv+93/128] bus_for_each_drv+0x5d/0x80 [device_attach+99/112] device_attach+0x63/0x70 [__device_attach+0/16] __device_attach+0x0/0x10 [bus_add_device+53/208] bus_add_device+0x35/0xd0 [device_pm_add+81/144] device_pm_add+0x51/0x90 [device_add+295/416] device_add+0x127/0x1a0 [probe_hwif_init_with_fixup+109/144] probe_hwif_init_with_fixup+0x6d/0x90 [ide_register_hw_with_fixup+424/448] ide_register_hw_with_fixup+0x1a8/0x1c0 [ide_undecoded_slave+0/192] ide_undecoded_slave+0x0/0xc0 [pg0+946311689/1069167616] idecs_register+0x89/0x90 [ide_cs] [ide_undecoded_slave+0/192] ide_undecoded_slave+0x0/0xc0 [pg0+946312715/1069167616] ide_config+0x3fb/0x650 [ide_cs] [pg0+946159313/1069167616] pccard_read_tuple+0x71/0xc0 [pcmcia_core] [pg0+946313644/1069167616] ide_event+0xdc/0xf0 [ide_cs] [pg0+946485222/1069167616] pcmcia_register_client+0x1d6/0x2a0 [pcmcia] [kzalloc+31/80] kzalloc+0x1f/0x50 [pg0+946311315/1069167616] ide_attach+0x93/0xd0 [ide_cs] [kobject_get+23/32] kobject_get+0x17/0x20 [pg0+946480299/1069167616] pcmcia_device_probe+0x8b/0x160 [pcmcia] [driver_probe_device+84/240] driver_probe_device+0x54/0xf0 [__device_attach+0/16] __device_attach+0x0/0x10 [bus_for_each_drv+93/128] bus_for_each_drv+0x5d/0x80 [device_attach+99/112] device_attach+0x63/0x70 [__device_attach+0/16] __device_attach+0x0/0x10 [bus_add_device+53/208] bus_add_device+0x35/0xd0 [device_pm_add+81/144] device_pm_add+0x51/0x90 [device_add+295/416] device_add+0x127/0x1a0 [pg0+946481513/1069167616] pcmcia_device_add+0x159/0x1e0 [pcmcia] [pg0+946481807/1069167616] pcmcia_card_add+0x9f/0xc0 [pcmcia] [vprintk+654/784] vprintk+0x28e/0x310 [kobject_get+23/32] kobject_get+0x17/0x20 [class_device_get+24/32] class_device_get+0x18/0x20 [pg0+946484693/1069167616] ds_event+0x115/0x150 [pcmcia] [pg0+946145438/1069167616] send_event+0x8e/0xf0 [pcmcia_core] [pg0+946146595/1069167616] socket_insert+0xf3/0x1d0 [pcmcia_core] [pg0+946147500/1069167616] socket_detect_change+0x3c/0x90 [pcmcia_core] [pg0+946148033/1069167616] pccardd+0x1c1/0x210 [pcmcia_core] [ret_from_fork+6/20] ret_from_fork+0x6/0x14 [default_wake_function+0/32] default_wake_function+0x0/0x20 [pg0+946147584/1069167616] pccardd+0x0/0x210 [pcmcia_core] [kernel_thread_helper+5/16] kernel_thread_helper+0x5/0x10 Code: 00 8d bc 27 00 00 00 00 83 ec 28 8b 44 24 30 89 5c 24 18 8b 5c 24 34 89 6c 24 24 8b 6c 24 38 89 74 24 1c 89 7c 24 20 8b 50 10 90 4a 78 0f 88 28 0e 00 00 31 c0 b9 ff ff ff ff 89 df f2 ae f7 Re-ejecting and inserting locks the system hard as Paul Sladen mentions above. -- IDE crash on inserting PCMCIA IDE device https://launchpad.net/bugs/44599 From bobby.weinmann at gmail.com Wed Sep 20 03:30:58 2006 From: bobby.weinmann at gmail.com (ybkosher) Date: Wed, 20 Sep 2006 03:30:58 -0000 Subject: [Bug 56878] Re: [Bug 56878] Re: No more sound (VIA 8233) in Dapper after upgrade from Breezy References: <20060819061811.12543.25978.malonedeb@gangotri.ubuntu.com> <20060919205937.17562.83156.launchpad@gandwana.ubuntu.com> Message-ID: <46caaada0609192030l755a7112v2a3c88cf79b42d3d@mail.gmail.com> I just got the new 2.6.15-27 kernel. It works fine, so thanks. I was not compiling my own audio modules, BTW. Thanks for the quick response. Bobby On 9/19/06, Ben Collins wrote: > > ** Changed in: linux-source-2.6.15 (Ubuntu) > Status: Rejected => Needs Info > > -- > No more sound (VIA 8233) in Dapper after upgrade from Breezy > https://launchpad.net/bugs/56878 > -- No more sound (VIA 8233) in Dapper after upgrade from Breezy https://launchpad.net/bugs/56878 From ben.collins at ubuntu.com Wed Sep 20 03:31:37 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Wed, 20 Sep 2006 03:31:37 -0000 Subject: [Bug 44599] Re: IDE crash on inserting PCMCIA IDE device References: <20060513200340.15819.65877.malonedeb@gangotri.ubuntu.com> Message-ID: <20060920033138.17562.43875.malone@gandwana.ubuntu.com> This is a known problem. It's fixed in edgy by using the pata_pcmcia module. It likely wont get fixed in dapper. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Unconfirmed => Confirmed -- IDE crash on inserting PCMCIA IDE device https://launchpad.net/bugs/44599 From crimsun at fungus.sh.nu Wed Sep 20 03:50:45 2006 From: crimsun at fungus.sh.nu (Daniel T Chen) Date: Wed, 20 Sep 2006 03:50:45 -0000 Subject: [Bug 56878] Re: No more sound (VIA 8233) in Dapper after upgrade from Breezy References: <20060819061811.12543.25978.malonedeb@gangotri.ubuntu.com> Message-ID: <20060920035045.17606.26585.launchpad@gandwana.ubuntu.com> ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Needs Info => Fix Released -- No more sound (VIA 8233) in Dapper after upgrade from Breezy https://launchpad.net/bugs/56878 From ant.amarilli at free.fr Wed Sep 20 05:22:48 2006 From: ant.amarilli at free.fr (Antoine Amarilli) Date: Wed, 20 Sep 2006 05:22:48 -0000 Subject: [Bug 39315] Re: Keyboard random repeat and dropped key presses References: <20060412160910.15436.50293.malonedeb@gangotri.ubuntu.com> Message-ID: <20060920052248.17606.2032.malone@gandwana.ubuntu.com> Hello, The problem is still occuring on my installation, but the tleds package is *not* installed. Any ideas ? Antoine. -- Keyboard random repeat and dropped key presses https://launchpad.net/bugs/39315 From karvinen+launchpad at iki.fi Wed Sep 20 06:19:37 2006 From: karvinen+launchpad at iki.fi (Tero Karvinen) Date: Wed, 20 Sep 2006 06:19:37 -0000 Subject: [Bug 36619] Re: usb-mass storage disk isn't recognized the right way References: <20060325183618.6253.2445.malonedeb@gandwana.ubuntu.com> Message-ID: <20060920061937.17606.94534.malone@gandwana.ubuntu.com> Thanks for releasing a fix for this serious problem. Unfortunately, the fix does not seem to work for me. I made a standard system upgrade. After that, I have 'uname -srv' "Linux 2.6.15-27-k7 #1 SMP PREEMPT Sat Sep 16 02:35:20 UTC 2006", 'grep DESC /etc/lsb-release' 'DISTRIB_DESCRIPTION="Ubuntu 6.06.1 LTS"'. No lines are printed on /var/log/dmesg or /var/log/syslog when plugging and unplugging usb. 'sudo rmmod ehci_hcd' does not help. Devices are not created either: 'ls /dev/sd*' "ls: /dev/sd*: No such file or directory". USB key lights are not lit when it is connected. The same USB key works on another Dapper machine with older set of updates. My USB mouse works normally. 'lsusb' shows exactly the same printout with and without USB key plugged in. $ lsusb # id hidden by me "[..]" Bus 001 Device 004: ID [..] Logitech, Inc. Bus 001 Device 001: ID 0000:0000 Bus 002 Device 001: ID 0000:0000 -- usb-mass storage disk isn't recognized the right way https://launchpad.net/bugs/36619 From bugwatch at bugs.launchpad.net Wed Sep 20 07:47:29 2006 From: bugwatch at bugs.launchpad.net (Bug Watch Updater) Date: Wed, 20 Sep 2006 07:47:29 -0000 Subject: [Bug 29789] Re: tv card audio not working References: <20060126170552.26274.32755.malonedeb@gangotri.ubuntu.com> Message-ID: <20060920074734.4279.79843.launchpad@gangotri.ubuntu.com> ** Changed in: linux (upstream) Status: Unknown => Confirmed -- tv card audio not working https://launchpad.net/bugs/29789 From phopfgartner at gmail.com Wed Sep 20 07:54:14 2006 From: phopfgartner at gmail.com (Peter Hopfgartner) Date: Wed, 20 Sep 2006 07:54:14 -0000 Subject: [Bug 49682] Re: Kernel can not find /dev/st0 after some time References: <20060614082320.25801.10622.malonedeb@gangotri.ubuntu.com> Message-ID: <20060920075414.23105.9578.malone@gangotri.ubuntu.com> May there be a connection to bug 54897? -- Kernel can not find /dev/st0 after some time https://launchpad.net/bugs/49682 From launchpad at aexl.de Wed Sep 20 08:23:19 2006 From: launchpad at aexl.de (aexl) Date: Wed, 20 Sep 2006 08:23:19 -0000 Subject: [Bug 51363] Re: VMWare networking extremely slow References: <20060630005047.17054.66852.malonedeb@gangotri.ubuntu.com> Message-ID: <20060920082320.17562.12562.malone@gandwana.ubuntu.com> thanks donald, i'll keep trying! -- VMWare networking extremely slow https://launchpad.net/bugs/51363 From antonioricardo.correia at gmail.com Wed Sep 20 08:58:20 2006 From: antonioricardo.correia at gmail.com (Antonio Ricardo Soares da Silva Correia) Date: Wed, 20 Sep 2006 08:58:20 -0000 Subject: [Bug 24533] Re: Fail to boot smp kernel References: <20060113142932.21012.10689.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060920085820.17606.34601.malone@gandwana.ubuntu.com> Richard, perhaps you are right in what concerns the ATI 7000 but that doesn't explain why my system works flawlessly with the other distributions and only fails with (K)Ubuntu. Oddly enough, now, even the plain 686 kernels don´t work in my machine. I´ve tried all since I installed Dapper and they freeze in X like the SMP ones. I wonder if they have merged 686 and 686_SMP kernels because I had one running for about 2 minutes before freezing and gkrellm indicated 2 processors what it only does with the SMP version of the kernel. So as you might guess, since Dapper was released I'm forced to use the 386 kernels and keep wondering why this just happens with (K)Ubuntu and not with the other dists. What are they doing wrong? -- Fail to boot smp kernel https://launchpad.net/bugs/24533 From michael.haselton at gmail.com Wed Sep 20 09:22:41 2006 From: michael.haselton at gmail.com (Icereval) Date: Wed, 20 Sep 2006 09:22:41 -0000 Subject: [Bug 60893] Re: Server Kernel update (47) prevents booting! References: <20060917092936.28941.75352.malonedeb@gandwana.ubuntu.com> Message-ID: <20060920092241.23105.84433.malone@gangotri.ubuntu.com> How do I recover since I have no previous kernel to goto? -- Server Kernel update (47) prevents booting! https://launchpad.net/bugs/60893 From pc741tw at gmail.com Wed Sep 20 10:12:22 2006 From: pc741tw at gmail.com (MENG HSING.TUNG) Date: Wed, 20 Sep 2006 10:12:22 -0000 Subject: [Bug 57502] Re: JMicron PATA/SATA Controller does not work References: <20060823192235.13463.13121.malonedeb@gandwana.ubuntu.com> Message-ID: <20060920101222.17606.91001.malone@gandwana.ubuntu.com> I am glad to hear that. Thanks. -- JMicron PATA/SATA Controller does not work https://launchpad.net/bugs/57502 From hvr at gnu.org Wed Sep 20 10:21:42 2006 From: hvr at gnu.org (Herbert V. Riedel) Date: Wed, 20 Sep 2006 10:21:42 -0000 Subject: [Bug 56885] Re: e1000 driver not working properly on x86_64? References: <20060819091800.12543.64715.malonedeb@gangotri.ubuntu.com> Message-ID: <20060920102142.23036.94259.malone@gangotri.ubuntu.com> the following thread seems to be related: http://ubuntuforums.org/showthread.php?t=242159 -- e1000 driver not working properly on x86_64? https://launchpad.net/bugs/56885 From golfbuf at gmail.com Wed Sep 20 10:50:07 2006 From: golfbuf at gmail.com (golfbuf) Date: Wed, 20 Sep 2006 10:50:07 -0000 Subject: [Bug 50323] Re: system freezes after last kernel update References: <20060619110659.20041.85554.malonedeb@gangotri.ubuntu.com> Message-ID: <20060920105007.23105.56111.malone@gangotri.ubuntu.com> I have tested the latest update to the kernel, linux-image-2.6.15-27-386 version 2.6.15-27.48 and still have this freeze up. -- system freezes after last kernel update https://launchpad.net/bugs/50323 From jrcmuniz at gmail.com Wed Sep 20 10:51:53 2006 From: jrcmuniz at gmail.com (Joao Muniz) Date: Wed, 20 Sep 2006 10:51:53 -0000 Subject: [Bug 57502] Re: JMicron PATA/SATA Controller does not work References: <20060823192235.13463.13121.malonedeb@gandwana.ubuntu.com> Message-ID: <20060920105153.23105.97336.malone@gangotri.ubuntu.com> Bad news... :( take a look at: http://www.ubuntuforums.org/showthread.php?t=258010&page=3&highlight=JMicron last two posts: doesn't work (gigabyte 965P DQ6 with core 2 duo) by "nuggien" and still doesn't work with Asus P5B Deluxe by "amorangi" -- JMicron PATA/SATA Controller does not work https://launchpad.net/bugs/57502 From hvr at gnu.org Wed Sep 20 11:00:26 2006 From: hvr at gnu.org (Herbert V. Riedel) Date: Wed, 20 Sep 2006 11:00:26 -0000 Subject: [Bug 56885] Re: e1000 driver not working properly on x86_64? References: <20060819091800.12543.64715.malonedeb@gangotri.ubuntu.com> Message-ID: <20060920110026.23036.69325.malone@gangotri.ubuntu.com> I've tried with intel's 7.2.7 e1000 version, but still no luck: packets exit the ethernet adapter on the wire, and also show up in tcpdump, but no ethernet frame seems to get received from the wire (although still getting increased frame-rx counters...) -- e1000 driver not working properly on x86_64? https://launchpad.net/bugs/56885 From hvr at gnu.org Wed Sep 20 11:30:17 2006 From: hvr at gnu.org (Herbert V. Riedel) Date: Wed, 20 Sep 2006 11:30:17 -0000 Subject: [Bug 56885] Re: e1000 driver not working properly on x86_64? References: <20060819091800.12543.64715.malonedeb@gangotri.ubuntu.com> Message-ID: <20060920113017.23105.72266.malone@gangotri.ubuntu.com> mystery solved: MSI-PCI Interrupts weren't triggered... (/proc/interrupts showed always zero interrupts), and the frame statistics are updated through a kernel- timer-invoked update-function by reading NIC internal registers holding the required statistics data... by compililing the driver with "make CFLAGS_EXTRA=-DDISABLE_PCI_MSI" and therefore falling back to 'IO-APIC' interrupts, frames started to show up in the network stack :-) so now it seems to me, that it's just a matter of incomplete/broken MSI support with the involved chipsets... :-/ -- e1000 driver not working properly on x86_64? https://launchpad.net/bugs/56885 From lists at whitehouse.org.nz Wed Sep 20 11:52:51 2006 From: lists at whitehouse.org.nz (Aaron Whitehouse) Date: Wed, 20 Sep 2006 11:52:51 -0000 Subject: [Bug 36664] Re: Installer should configure /etc/hdparm.conf References: <20060326015154.6279.34415.malonedeb@gandwana.ubuntu.com> Message-ID: <20060920115251.17606.26183.malone@gandwana.ubuntu.com> In Edgy Knot 3: $ hdparm /dev/cdrom /dev/cdrom: IO_support = 0 (default 16-bit) unmaskirq = 0 (off) using_dma = 1 (on) keepsettings = 0 (off) readonly = 0 (off) readahead = 256 (on) HDIO_GETGEO failed: Inappropriate ioctl for device $ sudo hdparm /dev/hda /dev/hda: multcount = 0 (off) IO_support = 0 (default 16-bit) unmaskirq = 0 (off) using_dma = 1 (on) keepsettings = 0 (off) readonly = 0 (off) readahead = 256 (on) geometry = 16383/255/63, sectors = 117210240, start = 0 So it still doesn't seem optimised. ** Attachment added: "lspci -n output" http://librarian.launchpad.net/4323895/lspci.txt -- Installer should configure /etc/hdparm.conf https://launchpad.net/bugs/36664 From anthony_guichard at hotmail.fr Wed Sep 20 12:15:57 2006 From: anthony_guichard at hotmail.fr (Louis XVI with a gun) Date: Wed, 20 Sep 2006 12:15:57 -0000 Subject: [Bug 39315] RE: [Bug 39315] Re: Keyboard random repeat and dropped key presses References: <20060412160910.15436.50293.malonedeb@gangotri.ubuntu.com> <20060919180903.17562.6493.malone@gandwana.ubuntu.com> Message-ID: I confirm that the problem still occurs on a dapper up to date for me ... :-( I 've disabled the "acpi_sbs" module to have a fonctionnal keyboard _________________________________________________________________ Retrouvez tout en un clin d'œil avec Windows Desktop Search ! http://desktop.msn.fr/ -- Keyboard random repeat and dropped key presses https://launchpad.net/bugs/39315 From pc741tw at gmail.com Wed Sep 20 12:56:11 2006 From: pc741tw at gmail.com (MENG HSING.TUNG) Date: Wed, 20 Sep 2006 12:56:11 -0000 Subject: [Bug 57502] Re: JMicron PATA/SATA Controller does not work References: <20060823192235.13463.13121.malonedeb@gandwana.ubuntu.com> Message-ID: <20060920125611.23036.83159.malone@gangotri.ubuntu.com> I try today daily build. Still wrong. Maybe not include fix yet. Harry up! -- JMicron PATA/SATA Controller does not work https://launchpad.net/bugs/57502 From pc741tw at gmail.com Wed Sep 20 12:57:25 2006 From: pc741tw at gmail.com (MENG HSING.TUNG) Date: Wed, 20 Sep 2006 12:57:25 -0000 Subject: [Bug 57502] Re: JMicron PATA/SATA Controller does not work References: <20060823192235.13463.13121.malonedeb@gandwana.ubuntu.com> Message-ID: <20060920125726.17562.66679.malone@gandwana.ubuntu.com> Sorry. I don't see "Tomorrow,we should have edgy daily ISO's with this new kernel." I will try tomorrow. -- JMicron PATA/SATA Controller does not work https://launchpad.net/bugs/57502 From dn at alphalog.de Wed Sep 20 13:02:29 2006 From: dn at alphalog.de (monocult) Date: Wed, 20 Sep 2006 13:02:29 -0000 Subject: [Bug 34723] Re: iMac G5 Thermal Fan Support References: <20060313091457.30057.2443.malonedeb@gandwana.ubuntu.com> Message-ID: <20060920130229.23105.23650.malone@gangotri.ubuntu.com> Edgy Knot 3 there is no thermal control on an PPC g5 Dual 2GHz -- iMac G5 Thermal Fan Support https://launchpad.net/bugs/34723 From rtg at aapsc.com Wed Sep 20 13:00:58 2006 From: rtg at aapsc.com (Richard Green) Date: Wed, 20 Sep 2006 13:00:58 -0000 Subject: [Bug 24533] Re: [Bug 24533] Re: Fail to boot smp kernel References: <20060113142932.21012.10689.launchpad@macquarie.warthogs.hbd.com> <20060920085820.17606.34601.malone@gandwana.ubuntu.com> Message-ID: On Wed, 20 Sep 2006, Antonio Ricardo Soares da Silva Correia wrote: > Richard, perhaps you are right in what concerns the ATI 7000 but that > doesn't explain why my system works flawlessly with the other > distributions and only fails with (K)Ubuntu. Oddly enough, now, even the > plain 686 kernels don´t work in my machine. I´ve tried all since I > installed Dapper and they freeze in X like the SMP ones. I wonder if > they have merged 686 and 686_SMP kernels because I had one running for > about 2 minutes before freezing and gkrellm indicated 2 processors what > it only does with the SMP version of the kernel. So as you might guess, > since Dapper was released I'm forced to use the 386 kernels and keep > wondering why this just happens with (K)Ubuntu and not with the other > dists. What are they doing wrong? > > Yes, I, too, am able to run the SMP kernels from other distros. But as I demonstrated, it's clearly an interaction between the X server, specifically the ATI driver, and the kernel. Possibly those other distros are still using XFree86, and haven't made the switch to xorg? Would you do a little testing? Perform the checks that I described earlier: 1) run `lspci`, and post the result line that describes your video card. 2) Reboot the system with the 686 kernel, to a console prompt, as I described earlier: a) go to 'system settings/system services', and turn off kdm in runlevel 3. b) edit /etc/inittab and change the initital default runlevel from 5 to 3 c) reboot, selecting the 686 kernel from the grub menu d) Login, and play around enough to satisfy yourself that the kernel alone is stable. e) Issue the command `startx` and report the results. It might also be informative if a Gnome user with a 686SMP/Radeon7000 system would chime in with their experiences... -- Fail to boot smp kernel https://launchpad.net/bugs/24533 From ben.collins at ubuntu.com Wed Sep 20 14:05:20 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Wed, 20 Sep 2006 14:05:20 -0000 Subject: [Bug 36619] Re: usb-mass storage disk isn't recognized the right way References: <20060325183618.6253.2445.malonedeb@gandwana.ubuntu.com> Message-ID: <20060920140520.23105.30588.malone@gangotri.ubuntu.com> This bug refers to two problems. One in firewire and the other in usb. Can you test that it does or doesn't work with firewire? -- usb-mass storage disk isn't recognized the right way https://launchpad.net/bugs/36619 From oyvinst at ifi.uio.no Wed Sep 20 14:37:03 2006 From: oyvinst at ifi.uio.no (=?utf-8?q?=C3=98yvind_Stegard?=) Date: Wed, 20 Sep 2006 14:37:03 -0000 Subject: [Bug 61449] Kernel panic when changing cpufreq governor References: <20060920143703.17606.17980.malonedeb@gandwana.ubuntu.com> Message-ID: <20060920143703.17606.17980.malonedeb@gandwana.ubuntu.com> Public bug reported: Binary package hint: linux-image-2.6.15-27-686 I got a kernel panic when i changed cpufreq governor from "conservative" to "ondemand". echo ondemand > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governar I don't use powernowd, only kernel-governors (they suit my needs just fine, don't need userspace). The governor was set to "conservative" before it happened. My system is a dual-core T2500 Intel Centrino laptop (Lenovo Thinkpad Z61m). Details about system should be in the dmesg output pasted further down below. There are two CPU entries in sysfs: /sys/devices/system/cpu/cpu0/cpufreq/ /sys/devices/system/cpu/cpu1/cpufreq/ I usually change governor for both CPUs at the same time (but only for cpu0 in this case). ---- Kernel panic output: ---- [17249509.052000] Unable to handle kernel NULL pointer dereference at virtual address 0000001c [17249509.052000] printing eip: [17249509.052000] f8c2f8be [17249509.052000] *pde = 00000000 [17249509.052000] Oops: 0000 [#1] [17249509.052000] PREEMPT SMP [17249509.052000] Modules linked in: ext2 aes cryptoloop loop acpi_sbs i2c_acpi_ec i2c_core battery ac ibm_acpi thermal fan button ipw3945 ieee80211 ieee80211_1_1_13 ieee80211_1_1_13_crypt tg3 autofs4 michael_mic arc4 ieee80211_crypt_tkip fglrx rfcomm l2cap bluetooth ipv6 nvram uinput ppdev parport_pc lp parport cpufreq_stats video tc1100_wmi sony_acpi pcc_acpi hotkey dev_acpi container nls_utf8 ntfs dm_mod cpufreq_userspace cpufreq_powersave cpufreq_conservative cpufreq_ondemand speedstep_centrino freq_table sr_mod sbp2 af_packet irtty_sir sir_dev joydev pcmcia irda crc_ccitt tsdev yenta_socket rsrc_nonstatic pcspkr pcmcia_core psmouse usbhid serio_raw sdhci mmc_core ieee80211_crypt snd_hda_intel snd_hda_codec snd_pcm_oss snd_mixer_oss snd_pcm snd_timer snd soundcore snd_page_alloc intel_agp agpgart shpchp pci_hotplug evdev sg ext3 jbd ide_generic ohci1394 ieee1394 ehci_hcd uhci_hcd usbcore sd_mod ahci libata scsi_mod ide_cd cdrom piix generic processor fbcon tileblit font bitblit softcursor capability commoncap [17249509.052000] CPU: 1 [17249509.052000] EIP: 0060:[] Tainted: P VLI [17249509.052000] EFLAGS: 00010297 (2.6.15-27-686) [17249509.052000] EIP is at dbs_check_cpu+0x3ae/0x4e0 [cpufreq_conservative] [17249509.052000] eax: 00000000 ebx: c03fe5b8 ecx: 01e10f01 edx: 00000001 [17249509.052000] esi: f8c30f44 edi: c2328a40 ebp: 00000008 esp: e299df24 [17249509.052000] ds: 007b es: 007b ss: 0068 [17249509.052000] Process events/1 (pid: 14375, threadinfo=e299c000 task=f5c2fa90) [17249509.052000] Stack: c03a5350 00000008 00000001 f7568bc0 00000000 f8c30f44 c2328a40 00000000 [17249509.052000] f8c2fa6d 00000000 00000202 00000202 00000202 c0138703 00000000 e299df80 [17249509.052000] 00000000 c2328a50 c2328a58 c2328a68 e299c000 f8c30f40 f8c2f9f0 00000001 [17249509.052000] Call Trace: [17249509.052000] [] do_dbs_timer+0x7d/0xb0 [cpufreq_conservative] [17249509.052000] [] worker_thread+0x1b3/0x270 [17249509.052000] [] do_dbs_timer+0x0/0xb0 [cpufreq_conservative] [17249509.052000] [] default_wake_function+0x0/0x20 [17249509.052000] [] worker_thread+0x0/0x270 [17249509.052000] [] kthread+0xc8/0xd0 [17249509.052000] [] kthread+0x0/0xd0 [17249509.052000] [] kernel_thread_helper+0x5/0x10 [17249509.052000] Code: 0f bc d0 b8 08 00 00 00 83 fa 09 0f 4d d0 83 fa 07 0f 87 b5 fc ff ff bb b8 e5 3f c0 8b 04 95 20 10 40 c0 bd 08 00 00 00 8b 04 03 <8b> 40 1c 89 6c 24 04 c7 04 24 50 53 3a c0 89 04 95 e0 12 c3 f8 [17249509.052000] ---- dmesg ---- [17179569.184000] Linux version 2.6.15-27-686 (buildd at terranova) (gcc version 4.0.3 (Ubuntu 4.0.3-1ubuntu5)) #1 SMP PREEMPT Sat Sep 16 02:13:27 UTC 2006 [17179569.184000] BIOS-provided physical RAM map: [17179569.184000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable) [17179569.184000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) [17179569.184000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) [17179569.184000] BIOS-e820: 0000000000100000 - 000000007fee0000 (usable) [17179569.184000] BIOS-e820: 000000007fee0000 - 000000007fef0000 (ACPI data) [17179569.184000] BIOS-e820: 000000007fef0000 - 000000007ff00000 (ACPI NVS) [17179569.184000] BIOS-e820: 000000007ff00000 - 0000000080000000 (reserved) [17179569.184000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved) [17179569.184000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [17179569.184000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) [17179569.184000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) [17179569.184000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) [17179569.184000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [17179569.184000] BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved) [17179569.184000] 1150MB HIGHMEM available. [17179569.184000] 896MB LOWMEM available. [17179569.184000] found SMP MP-table at 000f68a0 [17179569.184000] On node 0 totalpages: 524000 [17179569.184000] DMA zone: 4096 pages, LIFO batch:0 [17179569.184000] DMA32 zone: 0 pages, LIFO batch:0 [17179569.184000] Normal zone: 225280 pages, LIFO batch:31 [17179569.184000] HighMem zone: 294624 pages, LIFO batch:31 [17179569.184000] DMI present. [17179569.184000] ACPI: RSDP (v002 LENOVO ) @ 0x000f6860 [17179569.184000] ACPI: XSDT (v001 LENOVO TP-7F 0x00001100 LTP 0x00000000) @ 0x7fee32d1 [17179569.184000] ACPI: FADT (v003 LENOVO TP-7F 0x00001100 LNVO 0x00000001) @ 0x7fee3400 [17179569.184000] ACPI: SSDT (v001 LENOVO TP-7F 0x00001100 MSFT 0x0100000e) @ 0x7fee35b4 [17179569.184000] ACPI: ECDT (v001 LENOVO TP-7F 0x00001100 LNVO 0x00000001) @ 0x7feefd9a [17179569.184000] ACPI: TCPA (v002 LENOVO TP-7F 0x00001100 LNVO 0x00000001) @ 0x7feefdec [17179569.184000] ACPI: MADT (v001 LENOVO TP-7F 0x00001100 LNVO 0x00000001) @ 0x7feefe1e [17179569.184000] ACPI: MCFG (v001 LENOVO TP-7F 0x00001100 LNVO 0x00000001) @ 0x7feefe86 [17179569.184000] ACPI: HPET (v001 LENOVO TP-7F 0x00001100 LNVO 0x00000001) @ 0x7feefec4 [17179569.184000] ACPI: BOOT (v001 LENOVO TP-7F 0x00001100 LTP 0x00000001) @ 0x7feeffd8 [17179569.184000] ACPI: SSDT (v001 LENOVO TP-7F 0x00001100 INTL 0x20050513) @ 0x7fef297b [17179569.184000] ACPI: SSDT (v001 LENOVO TP-7F 0x00001100 INTL 0x20050513) @ 0x7fef2e82 [17179569.184000] ACPI: DSDT (v001 LENOVO TP-7F 0x00001100 MSFT 0x0100000e) @ 0x00000000 [17179569.184000] ACPI: PM-Timer IO Port: 0x1008 [17179569.184000] ACPI: Local APIC address 0xfee00000 [17179569.184000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [17179569.184000] Processor #0 6:14 APIC version 20 [17179569.184000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [17179569.184000] Processor #1 6:14 APIC version 20 [17179569.184000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [17179569.184000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [17179569.184000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [17179569.184000] IOAPIC[0]: apic_id 1 already used, trying 2 [17179569.184000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [17179569.184000] ACPI: IRQ0 used by override. [17179569.184000] ACPI: IRQ2 used by override. [17179569.184000] ACPI: IRQ9 used by override. [17179569.184000] Enabling APIC mode: Flat. Using 1 I/O APICs [17179569.184000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [17179569.184000] Using ACPI (MADT) for SMP configuration information [17179569.184000] Allocating PCI resources starting at 88000000 (gap: 80000000:70000000) [17179569.184000] Built 1 zonelists [17179569.184000] Kernel command line: root=/dev/sda5 ro quiet nofb [17179569.184000] mapped APIC to ffffd000 (fee00000) [17179569.184000] mapped IOAPIC to ffffc000 (fec00000) [17179569.184000] Initializing CPU#0 [17179569.184000] PID hash table entries: 4096 (order: 12, 65536 bytes) [17179569.184000] Console: colour VGA+ 80x25 [17179569.184000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [17179569.184000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [17179569.184000] Memory: 2065020k/2096000k available (2115k kernel code, 29852k reserved, 595k data, 332k init, 1178496k highmem) [17179569.184000] Checking if this processor honours the WP bit even in supervisor mode... Ok. [17179569.184000] Detected 1995.519 MHz processor. [17179569.184000] Using pmtmr for high-res timesource [17179570.684000] Calibrating delay using timer specific routine.. 3996.78 BogoMIPS (lpj=7993567) [17179570.684000] Security Framework v1.0.0 initialized [17179570.684000] SELinux: Disabled at boot. [17179570.684000] Mount-cache hash table entries: 512 [17179570.684000] CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000 [17179570.684000] CPU: After vendor identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000 [17179570.684000] monitor/mwait feature present. [17179570.684000] using mwait in idle threads. [17179570.684000] CPU: L1 I cache: 32K, L1 D cache: 32K [17179570.684000] CPU: L2 cache: 2048K [17179570.684000] CPU: Hyper-Threading is disabled [17179570.684000] CPU: After all inits, caps: bfe9fbff 00100000 00000000 00000040 0000c1a9 00000000 00000000 [17179570.684000] mtrr: v2.0 (20020519) [17179570.684000] Enabling fast FPU save and restore... done. [17179570.684000] Enabling unmasked SIMD FPU exception support... done. [17179570.684000] Checking 'hlt' instruction... OK. [17179570.700000] SMP alternatives: switching to UP code [17179570.700000] checking if image is initramfs... it is [17179571.200000] Freeing initrd memory: 6807k freed [17179571.204000] ACPI: Looking for DSDT ... not found! [17179571.224000] CPU0: Intel Genuine Intel(R) CPU T2500 @ 2.00GHz stepping 08 [17179571.224000] SMP alternatives: switching to SMP code [17179571.224000] Booting processor 1/1 eip 3000 [17179571.232000] Initializing CPU#1 [17179571.312000] Calibrating delay using timer specific routine.. 3990.40 BogoMIPS (lpj=7980806) [17179571.312000] CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000 [17179571.312000] CPU: After vendor identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000 [17179571.312000] monitor/mwait feature present. [17179571.312000] CPU: L1 I cache: 32K, L1 D cache: 32K [17179571.312000] CPU: L2 cache: 2048K [17179571.312000] CPU: Hyper-Threading is disabled [17179571.312000] CPU: After all inits, caps: bfe9fbff 00100000 00000000 00000040 0000c1a9 00000000 00000000 [17179571.312000] CPU1: Intel Genuine Intel(R) CPU T2500 @ 2.00GHz stepping 08 [17179571.312000] Total of 2 processors activated (7987.18 BogoMIPS). [17179571.312000] ENABLING IO-APIC IRQs [17179571.312000] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [17179571.456000] checking TSC synchronization across 2 CPUs: [17179571.456000] CPU#0 had 0 usecs TSC skew, fixed it up. [17179571.456000] CPU#1 had 0 usecs TSC skew, fixed it up. [17179571.460000] Brought up 2 CPUs [17179571.460000] NET: Registered protocol family 16 [17179571.460000] EISA bus registered [17179571.460000] ACPI: bus type pci registered [17179571.460000] PCI: PCI BIOS revision 2.10 entry at 0xfd84b, last bus=24 [17179571.460000] PCI: Using MMCONFIG [17179571.460000] ACPI: Subsystem revision 20051216 [17179571.460000] ACPI: Found ECDT [17179571.568000] ACPI: Interpreter enabled [17179571.568000] ACPI: Using IOAPIC for interrupt routing [17179571.568000] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11) [17179571.568000] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11) [17179571.568000] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11) [17179571.568000] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11) [17179571.568000] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11) [17179571.572000] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11) [17179571.572000] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11) [17179571.572000] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11) [17179571.572000] ACPI: PCI Root Bridge [PCI0] (0000:00) [17179571.572000] PCI: Probing PCI hardware (bus 00) [17179571.576000] PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 [17179571.576000] Boot video device is 0000:01:00.0 [17179571.576000] PCI: Transparent bridge - 0000:00:1e.0 [17179571.576000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [17179571.580000] ACPI: Embedded Controller [EC] (gpe 28) interrupt mode. [17179571.580000] ACPI: Power Resource [PUBS] (on) [17179571.584000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] [17179571.584000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT] [17179571.584000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT] [17179571.584000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT] [17179571.584000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT] [17179571.584000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] [17179571.588000] Linux Plug and Play Support v0.97 (c) Adam Belay [17179571.588000] pnp: PnP ACPI init [17179571.592000] pnp: PnP ACPI: found 12 devices [17179571.592000] PnPBIOS: Disabled by ACPI PNP [17179571.592000] PCI: Using ACPI for IRQ routing [17179571.592000] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [17179571.656000] PCI: Bridge: 0000:00:01.0 [17179571.656000] IO window: 2000-2fff [17179571.656000] MEM window: ee000000-ee0fffff [17179571.656000] PREFETCH window: d8000000-dfffffff [17179571.656000] PCI: Bridge: 0000:00:1c.0 [17179571.656000] IO window: disabled. [17179571.656000] MEM window: ee100000-ee1fffff [17179571.656000] PREFETCH window: disabled. [17179571.656000] PCI: Bridge: 0000:00:1c.1 [17179571.656000] IO window: 3000-4fff [17179571.656000] MEM window: ec000000-edffffff [17179571.656000] PREFETCH window: e4000000-e40fffff [17179571.656000] PCI: Bridge: 0000:00:1c.2 [17179571.656000] IO window: 5000-6fff [17179571.656000] MEM window: e8000000-e9ffffff [17179571.656000] PREFETCH window: e4100000-e41fffff [17179571.656000] PCI: Bridge: 0000:00:1c.3 [17179571.656000] IO window: 7000-8fff [17179571.656000] MEM window: ea000000-ebffffff [17179571.656000] PREFETCH window: e4200000-e42fffff [17179571.656000] PCI: Bus 22, cardbus bridge: 0000:15:00.0 [17179571.656000] IO window: 00009000-000090ff [17179571.656000] IO window: 00009400-000094ff [17179571.656000] PREFETCH window: e0000000-e1ffffff [17179571.656000] MEM window: e6000000-e7ffffff [17179571.656000] PCI: Bridge: 0000:00:1e.0 [17179571.656000] IO window: 9000-cfff [17179571.656000] MEM window: e4300000-e7ffffff [17179571.656000] PREFETCH window: e0000000-e3ffffff [17179571.656000] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 169 [17179571.656000] PCI: Setting latency timer of device 0000:00:01.0 to 64 [17179571.656000] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 20 (level, low) -> IRQ 177 [17179571.656000] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [17179571.656000] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 21 (level, low) -> IRQ 185 [17179571.656000] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [17179571.656000] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 22 (level, low) -> IRQ 193 [17179571.656000] PCI: Setting latency timer of device 0000:00:1c.2 to 64 [17179571.656000] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 23 (level, low) -> IRQ 201 [17179571.656000] PCI: Setting latency timer of device 0000:00:1c.3 to 64 [17179571.656000] PCI: Enabling device 0000:00:1e.0 (0005 -> 0007) [17179571.656000] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [17179571.656000] ACPI: PCI Interrupt 0000:15:00.0[A] -> GSI 16 (level, low) -> IRQ 169 [17179571.660000] Simple Boot Flag at 0x35 set to 0x1 [17179571.660000] audit: initializing netlink socket (disabled) [17179571.660000] audit(1158769402.656:1): initialized [17179571.660000] highmem bounce pool size: 64 pages [17179571.660000] VFS: Disk quotas dquot_6.5.1 [17179571.660000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [17179571.660000] Initializing Cryptographic API [17179571.660000] io scheduler noop registered [17179571.660000] io scheduler anticipatory registered [17179571.660000] io scheduler deadline registered [17179571.660000] io scheduler cfq registered [17179571.660000] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 169 [17179571.660000] PCI: Setting latency timer of device 0000:00:01.0 to 64 [17179571.660000] assign_interrupt_mode Found MSI capability [17179571.660000] Allocate Port Service[pcie00] [17179571.660000] Allocate Port Service[pcie03] [17179571.660000] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 20 (level, low) -> IRQ 177 [17179571.660000] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [17179571.660000] assign_interrupt_mode Found MSI capability [17179571.660000] Allocate Port Service[pcie00] [17179571.660000] Allocate Port Service[pcie02] [17179571.660000] Allocate Port Service[pcie03] [17179571.660000] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 21 (level, low) -> IRQ 185 [17179571.660000] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [17179571.660000] assign_interrupt_mode Found MSI capability [17179571.660000] Allocate Port Service[pcie00] [17179571.660000] Allocate Port Service[pcie02] [17179571.660000] Allocate Port Service[pcie03] [17179571.660000] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 22 (level, low) -> IRQ 193 [17179571.660000] PCI: Setting latency timer of device 0000:00:1c.2 to 64 [17179571.660000] assign_interrupt_mode Found MSI capability [17179571.660000] Allocate Port Service[pcie00] [17179571.660000] Allocate Port Service[pcie02] [17179571.660000] Allocate Port Service[pcie03] [17179571.660000] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 23 (level, low) -> IRQ 201 [17179571.660000] PCI: Setting latency timer of device 0000:00:1c.3 to 64 [17179571.660000] assign_interrupt_mode Found MSI capability [17179571.660000] Allocate Port Service[pcie00] [17179571.660000] Allocate Port Service[pcie02] [17179571.660000] Allocate Port Service[pcie03] [17179571.660000] isapnp: Scanning for PnP cards... [17179572.016000] isapnp: No Plug & Play device found [17179572.032000] Real Time Clock Driver v1.12 [17179572.032000] hpet_acpi_add: no address or irqs in _CRS [17179572.032000] PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [17179572.036000] serio: i8042 AUX port at 0x60,0x64 irq 12 [17179572.036000] serio: i8042 KBD port at 0x60,0x64 irq 1 [17179572.036000] Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled [17179572.036000] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a NS16550A [17179572.040000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [17179572.040000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [17179572.040000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [17179572.040000] mice: PS/2 mouse device common for all mice [17179572.040000] EISA: Probing bus 0 at eisa.0 [17179572.040000] Cannot allocate resource for EISA slot 1 [17179572.040000] Cannot allocate resource for EISA slot 2 [17179572.040000] Cannot allocate resource for EISA slot 3 [17179572.040000] Cannot allocate resource for EISA slot 4 [17179572.040000] Cannot allocate resource for EISA slot 5 [17179572.040000] Cannot allocate resource for EISA slot 6 [17179572.040000] Cannot allocate resource for EISA slot 7 [17179572.040000] Cannot allocate resource for EISA slot 8 [17179572.040000] EISA: Detected 0 cards. [17179572.040000] NET: Registered protocol family 2 [17179572.056000] input: AT Translated Set 2 keyboard as /class/input/input0 [17179572.080000] IP route cache hash table entries: 65536 (order: 6, 262144 bytes) [17179572.080000] TCP established hash table entries: 262144 (order: 9, 3145728 bytes) [17179572.080000] TCP bind hash table entries: 65536 (order: 7, 786432 bytes) [17179572.080000] TCP: Hash tables configured (established 262144 bind 65536) [17179572.080000] TCP reno registered [17179572.080000] TCP bic registered [17179572.080000] NET: Registered protocol family 1 [17179572.080000] NET: Registered protocol family 8 [17179572.080000] NET: Registered protocol family 20 [17179572.080000] Starting balanced_irq [17179572.080000] Using IPI No-Shortcut mode [17179572.080000] ACPI wakeup devices: [17179572.080000] LID SLPB EXP0 EXP1 EXP2 EXP3 PCI1 USB0 USB1 USB3 USB7 HDEF [17179572.080000] ACPI: (supports S0 S3 S4 S5) [17179572.080000] Freeing unused kernel memory: 332k freed [17179572.120000] Capability LSM initialized [17179572.152000] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [17179572.152000] ACPI: Processor [CPU0] (supports 8 throttling states) [17179572.152000] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) [17179572.152000] ACPI: Processor [CPU1] (supports 8 throttling states) [17179572.152000] ACPI: Thermal Zone [THM0] (52 C) [17179572.156000] ACPI: Thermal Zone [THM1] (53 C) [17179572.532000] ICH7: IDE controller at PCI slot 0000:00:1f.1 [17179572.532000] ACPI: PCI Interrupt 0000:00:1f.1[C] -> GSI 16 (level, low) -> IRQ 169 [17179572.532000] ICH7: chipset revision 2 [17179572.532000] ICH7: not 100% native mode: will probe irqs later [17179572.532000] ide0: BM-DMA at 0x1880-0x1887, BIOS settings: hda:DMA, hdb:pio [17179572.532000] Probing IDE interface ide0... [17179573.268000] hda: MATSHITADVD-RAM UJ-850, ATAPI CD/DVD-ROM drive [17179573.604000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [17179573.612000] hda: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33) [17179573.612000] Uniform CD-ROM driver Revision: 3.20 [17179573.652000] SCSI subsystem initialized [17179573.652000] ACPI: bus type scsi registered [17179573.652000] libata version 1.20 loaded. [17179573.652000] ahci 0000:00:1f.2: version 1.2 [17179573.652000] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 16 (level, low) -> IRQ 169 [17179579.472000] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [17179579.472000] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x1 impl SATA mode [17179579.472000] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part [17179579.472000] ata1: SATA max UDMA/133 cmd 0xF8876500 ctl 0x0 bmdma 0x0 irq 66 [17179579.472000] ata2: SATA max UDMA/133 cmd 0xF8876580 ctl 0x0 bmdma 0x0 irq 66 [17179579.472000] ata3: SATA max UDMA/133 cmd 0xF8876600 ctl 0x0 bmdma 0x0 irq 66 [17179579.472000] ata4: SATA max UDMA/133 cmd 0xF8876680 ctl 0x0 bmdma 0x0 irq 66 [17179579.676000] ata1: dev 0 cfg 00:045a 49:2f00 82:346b 83:7f09 84:6063 85:3469 86:be09 87:6063 88:043f 93:0000 [17179579.676000] ata1: dev 0 ATA-7, max UDMA/100, 195371568 sectors: LBA48 [17179579.676000] sata_get_dev_handle: SATA dev addr=0x1f0002, handle=0xdffdf980 [17179579.684000] ata1: dev 0 configured for UDMA/100 [17179579.684000] sata_get_dev_handle: SATA dev addr=0x1f0002, handle=0xdffdf980 [17179579.688000] scsi0 : ahci [17179579.892000] ata2: no device found (phy stat 00000000) [17179579.892000] scsi1 : ahci [17179580.096000] ata3: no device found (phy stat 00000000) [17179580.096000] scsi2 : ahci [17179580.300000] ata4: no device found (phy stat 00000000) [17179580.300000] scsi3 : ahci [17179580.300000] Vendor: ATA Model: FUJITSU MHV2100B Rev: 0084 [17179580.300000] Type: Direct-Access ANSI SCSI revision: 05 [17179580.304000] Driver 'sd' needs updating - please use bus_type methods [17179580.304000] SCSI device sda: 195371568 512-byte hdwr sectors (100030 MB) [17179580.304000] SCSI device sda: drive cache: write back [17179580.304000] SCSI device sda: 195371568 512-byte hdwr sectors (100030 MB) [17179580.304000] SCSI device sda: drive cache: write back [17179580.304000] sda: sda1 sda2 sda3 < sda5 sda6 sda7 > [17179580.420000] sd 0:0:0:0: Attached scsi disk sda [17179580.812000] usbcore: registered new driver usbfs [17179580.812000] usbcore: registered new driver hub [17179580.812000] USB Universal Host Controller Interface driver v2.3 [17179580.812000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 169 [17179580.812000] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [17179580.812000] uhci_hcd 0000:00:1d.0: UHCI Host Controller [17179580.812000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [17179580.812000] uhci_hcd 0000:00:1d.0: irq 169, io base 0x00001800 [17179580.812000] hub 1-0:1.0: USB hub found [17179580.812000] hub 1-0:1.0: 2 ports detected [17179580.856000] ieee1394: Initialized config rom entry `ip1394' [17179580.916000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 74 [17179580.916000] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [17179580.916000] uhci_hcd 0000:00:1d.1: UHCI Host Controller [17179580.916000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 [17179580.916000] uhci_hcd 0000:00:1d.1: irq 74, io base 0x00001820 [17179580.916000] hub 2-0:1.0: USB hub found [17179580.916000] hub 2-0:1.0: 2 ports detected [17179581.020000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 82 [17179581.020000] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [17179581.020000] uhci_hcd 0000:00:1d.2: UHCI Host Controller [17179581.020000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 [17179581.020000] uhci_hcd 0000:00:1d.2: irq 82, io base 0x00001840 [17179581.020000] hub 3-0:1.0: USB hub found [17179581.020000] hub 3-0:1.0: 2 ports detected [17179581.124000] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 90 [17179581.124000] PCI: Setting latency timer of device 0000:00:1d.3 to 64 [17179581.124000] uhci_hcd 0000:00:1d.3: UHCI Host Controller [17179581.124000] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 [17179581.124000] uhci_hcd 0000:00:1d.3: irq 90, io base 0x00001860 [17179581.124000] hub 4-0:1.0: USB hub found [17179581.124000] hub 4-0:1.0: 2 ports detected [17179581.156000] usb 1-1: new low speed USB device using uhci_hcd and address 2 [17179581.228000] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 19 (level, low) -> IRQ 90 [17179581.228000] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [17179581.228000] ehci_hcd 0000:00:1d.7: EHCI Host Controller [17179581.228000] ehci_hcd 0000:00:1d.7: debug port 1 [17179581.228000] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [17179581.228000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 [17179581.228000] ehci_hcd 0000:00:1d.7: irq 90, io mem 0xee404000 [17179581.232000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [17179581.232000] hub 5-0:1.0: USB hub found [17179581.232000] hub 5-0:1.0: 8 ports detected [17179581.336000] ohci1394: $Rev: 1313 $ Ben Collins [17179581.336000] PCI: Enabling device 0000:15:00.1 (0000 -> 0002) [17179581.336000] ACPI: PCI Interrupt 0000:15:00.1[B] -> GSI 17 (level, low) -> IRQ 74 [17179581.336000] PCI: Setting latency timer of device 0000:15:00.1 to 64 [17179581.384000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[74] MMIO=[e4302000-e43027ff] Max Packet=[2048] [17179581.404000] Probing IDE interface ide1... [17179581.680000] usb 1-1: device not accepting address 2, error -71 [17179581.992000] Attempting manual resume [17179582.000000] EXT3-fs: INFO: recovery required on readonly filesystem. [17179582.000000] EXT3-fs: write access will be enabled during recovery. [17179582.416000] usb 5-5: new high speed USB device using ehci_hcd and address 3 [17179582.548000] hub 5-5:1.0: USB hub found [17179582.548000] hub 5-5:1.0: 2 ports detected [17179582.608000] EXT3-fs: recovery complete. [17179582.608000] kjournald starting. Commit interval 5 seconds [17179582.608000] EXT3-fs: mounted filesystem with ordered data mode. [17179582.656000] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00061b002023f993] [17179583.076000] usb 1-1: new low speed USB device using uhci_hcd and address 4 [17179583.448000] usb 5-5.2: new high speed USB device using ehci_hcd and address 5 [17179583.780000] usb 3-2: new full speed USB device using uhci_hcd and address 2 [17179588.784000] sd 0:0:0:0: Attached scsi generic sg0 type 0 [17179589.348000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [17179589.372000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [17179589.396000] Linux agpgart interface v0.101 (c) Dave Jones [17179589.408000] agpgart: Detected an Intel 945GM Chipset. [17179589.424000] agpgart: AGP aperture is 256M @ 0x0 [17179589.476000] hw_random: RNG not detected [17179589.628000] tg3.c:v3.47 (Dec 28, 2005) [17179589.628000] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 169 [17179589.628000] PCI: Setting latency timer of device 0000:02:00.0 to 64 [17179589.632000] eth0: Tigon3 [partno(BCM95752m) rev 6002 PHY(5752)] (PCI Express) 10/100/1000BaseT Ethernet 00:16:36:79:4d:2d [17179589.632000] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[1] [17179589.632000] eth0: dma_rwctrl[76180000] [17179589.680000] ieee80211_1_1_13_crypt: registered algorithm 'NULL' [17179589.684000] ieee80211_1_1_13: 802.11 data/management/control stack, 1.1.13 [17179589.684000] ieee80211_1_1_13: Copyright (C) 2004-2005 Intel Corporation [17179589.788000] ACPI: PCI Interrupt 0000:00:1b.0[B] -> GSI 17 (level, low) -> IRQ 74 [17179589.788000] PCI: Setting latency timer of device 0000:00:1b.0 to 64 [17179589.792000] ieee80211_crypt: registered algorithm 'NULL' [17179589.792000] ieee80211: 802.11 data/management/control stack, git-1.1.7 [17179589.792000] ieee80211: Copyright (C) 2004-2005 Intel Corporation [17179589.824000] ipw3945: Intel(R) PRO/Wireless 3945 Network Connection driver for Linux, 1.0.5m [17179589.824000] ipw3945: Copyright(c) 2003-2006 Intel Corporation [17179589.844000] usbcore: registered new driver hiddev [17179589.860000] sdhci: Secure Digital Host Controller Interface driver, 0.10 [17179589.860000] sdhci: Copyright(c) Pierre Ossman [17179589.860000] input: Logitech Optical USB Mouse as /class/input/input1 [17179589.860000] input: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:1d.0-1 [17179589.860000] usbcore: registered new driver usbhid [17179589.860000] drivers/usb/input/hid-core.c: v2.6:USB HID core driver [17179589.868000] input: PC Speaker as /class/input/input2 [17179589.940000] ts: Compaq touchscreen protocol output [17179590.112000] irda_init() [17179590.112000] NET: Registered protocol family 23 [17179590.136000] nsc_ircc_pnp_probe() : From PnP, found firbase 0x2F8 ; irq 3 ; dma 3. [17179590.136000] nsc-ircc, chip->init [17179590.136000] nsc-ircc, Found chip at base=0x164e [17179590.136000] nsc-ircc, driver loaded (Dag Brattli) [17179590.136000] nsc_ircc_open(), can't get iobase of 0x2f8 [17179590.136000] nsc-ircc, Found chip at base=0x164e [17179590.136000] nsc-ircc, driver loaded (Dag Brattli) [17179590.136000] nsc_ircc_open(), can't get iobase of 0x2f8 [17179590.140000] pnp: Device 00:09 disabled. [17179590.212000] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x81a0b1, caps: 0xa04793/0x300000 [17179590.212000] serio: Synaptics pass-through port at isa0060/serio1/input0 [17179590.256000] input: SynPS/2 Synaptics TouchPad as /class/input/input3 [17179590.324000] ACPI: PCI Interrupt 0000:15:00.0[A] -> GSI 16 (level, low) -> IRQ 169 [17179590.324000] Yenta: CardBus bridge found at 0000:15:00.0 [17aa:2028] [17179590.324000] ACPI: PCI Interrupt 0000:03:00.0[A] -> <6>Yenta: Using INTVAL to route CSC interrupts to PCI [17179590.324000] Yenta: Routing CardBus interrupts to ISA [17179590.324000] GSI 17 (level, low) -> IRQ 74 [17179590.324000] Yenta TI: socket 0000:15:00.0, mfunc 0x01db1b22, devctl 0x64 [17179590.324000] PCI: Setting latency timer of device 0000:03:00.0 to 64 [17179590.324000] ipw3945: Detected Intel PRO/Wireless 3945ABG Network Connection [17179590.560000] Yenta: ISA IRQ mask 0x0cf8, PCI irq 169 [17179590.560000] Socket status: 30000086 [17179590.560000] Yenta: Raising subordinate bus# of parent bus (#15) from #18 to #19 [17179590.560000] pcmcia: parent PCI bridge I/O window: 0x9000 - 0xcfff [17179590.560000] cs: IO port probe 0x9000-0xcfff: clean. [17179590.560000] pcmcia: parent PCI bridge Memory window: 0xe4300000 - 0xe7ffffff [17179590.560000] pcmcia: parent PCI bridge Memory window: 0xe0000000 - 0xe3ffffff [17179590.580000] ACPI: PCI Interrupt 0000:15:00.3[A] -> GSI 16 (level, low) -> IRQ 169 [17179590.580000] PCI: Setting latency timer of device 0000:15:00.3 to 64 [17179590.632000] sdhci: ============== REGISTER DUMP ============== [17179590.632000] sdhci: Sys addr: 0x00000000 | Version: 0x00008900 [17179590.632000] sdhci: Blk size: 0x00000000 | Blk cnt: 0x00000000 [17179590.632000] sdhci: Argument: 0x00000000 | Trn mode: 0x00000000 [17179590.632000] sdhci: Present: 0x000a0000 | Host ctl: 0x00000000 [17179590.632000] sdhci: Power: 0x00000000 | Blk gap: 0x00000000 [17179590.632000] sdhci: Walk up: 0x00000000 | Clock: 0x00000000 [17179590.632000] sdhci: Timeout: 0x0000000e | Int stat: 0x00000000 [17179590.632000] sdhci: Int enab: 0x11ff00cf | Sig enab: 0x11ff00cf [17179590.632000] sdhci: AC12 err: 0x00000000 | Slot int: 0x00000000 [17179590.632000] sdhci: Caps: 0x01e030b0 | Max curr: 0x0000007d [17179590.632000] sdhci: =========================================== [17179590.684000] mmc0: SDHCI at 0xe4302800 irq 169 DMA [17179591.064000] cs: IO port probe 0x100-0x3af: clean. [17179591.064000] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7 [17179591.068000] cs: IO port probe 0x820-0x8ff: clean. [17179591.068000] cs: IO port probe 0xc00-0xcf7: clean. [17179591.068000] cs: IO port probe 0xa00-0xaff: clean. [17179591.212000] hda_intel: azx_get_response timeout, switching to single_cmd mode... [17179591.500000] ipw3945: Detected geography ABG (13 802.11bg channels, 23 802.11a channels) [17179591.640000] NET: Registered protocol family 17 [17179592.160000] tg3: eth0: Link is up at 100 Mbps, full duplex. [17179592.160000] tg3: eth0: Flow control is on for TX and on for RX. [17179594.120000] **** SET: Misaligned resource pointer: f71f3242 Type 00 Len 42 [17179594.120000] **** SET: Misaligned resource pointer: f71f32c6 Type 07 Len 0 [17179594.120000] pnp: Device 00:09 activated. [17179594.120000] nsc_ircc_pnp_probe() : From PnP, found firbase 0x2F8 ; irq 3 ; dma 3. [17179594.120000] nsc-ircc, chip->init [17179594.120000] nsc-ircc, Found chip at base=0x164e [17179594.120000] nsc-ircc, driver loaded (Dag Brattli) [17179594.120000] nsc_ircc_open(), can't get iobase of 0x2f8 [17179594.120000] nsc-ircc, Found chip at base=0x164e [17179594.120000] nsc-ircc, driver loaded (Dag Brattli) [17179594.120000] nsc_ircc_open(), can't get iobase of 0x2f8 [17179594.120000] pnp: Device 00:09 disabled. [17179594.180000] sbp2: $Rev: 1306 $ Ben Collins [17179594.180000] ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1) [17179594.180000] ieee1394: sbp2: Try serialize_io=0 for better performance [17179594.352000] loop: loaded (max 8 devices) [17179594.388000] Adding 2096440k swap on /dev/sda6. Priority:-1 extents:1 across:2096440k [17179594.416000] EXT3 FS on sda5, internal journal [17179594.592000] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel at redhat.com [17179594.860000] cdrom: open failed. [17179595.964000] IBM TrackPoint firmware: 0x0e, buttons: 3/3 [17179596.248000] input: TPPS/2 IBM TrackPoint as /class/input/input4 [17179598.384000] NET: Registered protocol family 10 [17179598.384000] lo: Disabled Privacy Extensions [17179598.384000] IPv6 over IPv4 tunneling driver [17179604.284000] kjournald starting. Commit interval 5 seconds [17179604.284000] EXT3 FS on sda7, internal journal [17179604.284000] EXT3-fs: mounted filesystem with ordered data mode. [17179604.328000] NTFS driver 2.1.25 [Flags: R/O MODULE]. [17179604.412000] NTFS volume version 3.1. [17179604.680000] ttyS1: LSR safety check engaged! [17179604.684000] ttyS1: LSR safety check engaged! [17179605.296000] ACPI: AC Adapter [AC] (on-line) [17179605.304000] ACPI: Battery Slot [BAT0] (battery present) [17179605.384000] ACPI: Power Button (FF) [PWRF] [17179605.384000] ACPI: Lid Switch [LID] [17179605.384000] ACPI: Sleep Button (CM) [SLPB] [17179605.460000] ibm_acpi: IBM ThinkPad ACPI Extras v0.12a [17179605.460000] ibm_acpi: http://ibm-acpi.sf.net/ [17179605.464000] ibm_acpi: dock device not present [17179605.480000] pcc_acpi: loading... [17179605.580000] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) [17179605.580000] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) [17179606.008000] lp: driver loaded but no devices found [17179606.044000] ppdev: user-space parallel port driver [17179606.272000] apm: BIOS not found. [17179607.352000] ttyS1: LSR safety check engaged! [17179608.040000] Non-volatile memory driver v1.2 [17179608.060000] input: /usr/sbin/thinkpad-keys as /class/input/input5 [17179608.380000] Bluetooth: Core ver 2.8 [17179608.380000] NET: Registered protocol family 31 [17179608.380000] Bluetooth: HCI device and connection manager initialized [17179608.380000] Bluetooth: HCI socket layer initialized [17179608.404000] Bluetooth: L2CAP ver 2.8 [17179608.404000] Bluetooth: L2CAP socket layer initialized [17179608.408000] Bluetooth: RFCOMM socket layer initialized [17179608.408000] Bluetooth: RFCOMM TTY layer initialized [17179608.408000] Bluetooth: RFCOMM ver 1.7 [17179609.016000] eth0: no IPv6 routers present [17179610.964000] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel. [17179610.968000] [fglrx] Maximum main memory to use for locked dma buffers: 1897 MBytes. [17179610.968000] [fglrx] module loaded - fglrx 8.28.8 [Aug 17 2006] on minor 0 [17179610.992000] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 169 [17179612.660000] [fglrx] total GART = 134217728 [17179612.660000] [fglrx] free GART = 118226944 [17179612.660000] [fglrx] max single GART = 118226944 [17179612.660000] [fglrx] total LFB = 124686336 [17179612.660000] [fglrx] free LFB = 110088192 [17179612.660000] [fglrx] max single LFB = 110088192 [17179612.660000] [fglrx] total Inv = 0 [17179612.660000] [fglrx] free Inv = 0 [17179612.664000] [fglrx] max single Inv = 0 [17179612.664000] [fglrx] total TIM = 0 ** Affects: linux-source-2.6.15 (Ubuntu) Importance: Untriaged Status: Unconfirmed -- Kernel panic when changing cpufreq governor https://launchpad.net/bugs/61449 From oyvinst at ifi.uio.no Wed Sep 20 14:50:53 2006 From: oyvinst at ifi.uio.no (=?utf-8?q?=C3=98yvind_Stegard?=) Date: Wed, 20 Sep 2006 14:50:53 -0000 Subject: [Bug 61449] Re: Kernel panic when changing cpufreq governor References: <20060920143703.17606.17980.malonedeb@gandwana.ubuntu.com> Message-ID: <20060920145053.17606.25489.malone@gandwana.ubuntu.com> I can reproduce this bug. If governor is switched from "conservative" to "ondemand", the kernel panics (reproduced 2 times now). ** Description changed: Binary package hint: linux-image-2.6.15-27-686 - I got a kernel panic when i changed cpufreq governor from "conservative" + I got a kernel panic when I changed cpufreq governor from "conservative" to "ondemand". echo ondemand > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governar I don't use powernowd, only kernel-governors (they suit my needs just fine, don't need userspace). The governor was set to "conservative" before it happened. My system is a dual-core T2500 Intel Centrino laptop (Lenovo Thinkpad Z61m). Details about system should be in the dmesg output pasted further down below. There are two CPU entries in sysfs: /sys/devices/system/cpu/cpu0/cpufreq/ /sys/devices/system/cpu/cpu1/cpufreq/ I usually change governor for both CPUs at the same time (but only for cpu0 in this case). ---- Kernel panic output: ---- [17249509.052000] Unable to handle kernel NULL pointer dereference at virtual address 0000001c [17249509.052000] printing eip: [17249509.052000] f8c2f8be [17249509.052000] *pde = 00000000 [17249509.052000] Oops: 0000 [#1] [17249509.052000] PREEMPT SMP [17249509.052000] Modules linked in: ext2 aes cryptoloop loop acpi_sbs i2c_acpi_ec i2c_core battery ac ibm_acpi thermal fan button ipw3945 ieee80211 ieee80211_1_1_13 ieee80211_1_1_13_crypt tg3 autofs4 michael_mic arc4 ieee80211_crypt_tkip fglrx rfcomm l2cap bluetooth ipv6 nvram uinput ppdev parport_pc lp parport cpufreq_stats video tc1100_wmi sony_acpi pcc_acpi hotkey dev_acpi container nls_utf8 ntfs dm_mod cpufreq_userspace cpufreq_powersave cpufreq_conservative cpufreq_ondemand speedstep_centrino freq_table sr_mod sbp2 af_packet irtty_sir sir_dev joydev pcmcia irda crc_ccitt tsdev yenta_socket rsrc_nonstatic pcspkr pcmcia_core psmouse usbhid serio_raw sdhci mmc_core ieee80211_crypt snd_hda_intel snd_hda_codec snd_pcm_oss snd_mixer_oss snd_pcm snd_timer snd soundcore snd_page_alloc intel_agp agpgart shpchp pci_hotplug evdev sg ext3 jbd ide_generic ohci1394 ieee1394 ehci_hcd uhci_hcd usbcore sd_mod ahci libata scsi_mod ide_cd cdrom piix generic processor fbcon tileblit font bitblit softcursor capability commoncap [17249509.052000] CPU: 1 [17249509.052000] EIP: 0060:[] Tainted: P VLI [17249509.052000] EFLAGS: 00010297 (2.6.15-27-686) [17249509.052000] EIP is at dbs_check_cpu+0x3ae/0x4e0 [cpufreq_conservative] [17249509.052000] eax: 00000000 ebx: c03fe5b8 ecx: 01e10f01 edx: 00000001 [17249509.052000] esi: f8c30f44 edi: c2328a40 ebp: 00000008 esp: e299df24 [17249509.052000] ds: 007b es: 007b ss: 0068 [17249509.052000] Process events/1 (pid: 14375, threadinfo=e299c000 task=f5c2fa90) [17249509.052000] Stack: c03a5350 00000008 00000001 f7568bc0 00000000 f8c30f44 c2328a40 00000000 [17249509.052000] f8c2fa6d 00000000 00000202 00000202 00000202 c0138703 00000000 e299df80 [17249509.052000] 00000000 c2328a50 c2328a58 c2328a68 e299c000 f8c30f40 f8c2f9f0 00000001 [17249509.052000] Call Trace: [17249509.052000] [] do_dbs_timer+0x7d/0xb0 [cpufreq_conservative] [17249509.052000] [] worker_thread+0x1b3/0x270 [17249509.052000] [] do_dbs_timer+0x0/0xb0 [cpufreq_conservative] [17249509.052000] [] default_wake_function+0x0/0x20 [17249509.052000] [] worker_thread+0x0/0x270 [17249509.052000] [] kthread+0xc8/0xd0 [17249509.052000] [] kthread+0x0/0xd0 [17249509.052000] [] kernel_thread_helper+0x5/0x10 [17249509.052000] Code: 0f bc d0 b8 08 00 00 00 83 fa 09 0f 4d d0 83 fa 07 0f 87 b5 fc ff ff bb b8 e5 3f c0 8b 04 95 20 10 40 c0 bd 08 00 00 00 8b 04 03 <8b> 40 1c 89 6c 24 04 c7 04 24 50 53 3a c0 89 04 95 e0 12 c3 f8 [17249509.052000] ---- dmesg ---- [17179569.184000] Linux version 2.6.15-27-686 (buildd at terranova) (gcc version 4.0.3 (Ubuntu 4.0.3-1ubuntu5)) #1 SMP PREEMPT Sat Sep 16 02:13:27 UTC 2006 [17179569.184000] BIOS-provided physical RAM map: [17179569.184000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable) [17179569.184000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) [17179569.184000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) [17179569.184000] BIOS-e820: 0000000000100000 - 000000007fee0000 (usable) [17179569.184000] BIOS-e820: 000000007fee0000 - 000000007fef0000 (ACPI data) [17179569.184000] BIOS-e820: 000000007fef0000 - 000000007ff00000 (ACPI NVS) [17179569.184000] BIOS-e820: 000000007ff00000 - 0000000080000000 (reserved) [17179569.184000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved) [17179569.184000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [17179569.184000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) [17179569.184000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) [17179569.184000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) [17179569.184000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [17179569.184000] BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved) [17179569.184000] 1150MB HIGHMEM available. [17179569.184000] 896MB LOWMEM available. [17179569.184000] found SMP MP-table at 000f68a0 [17179569.184000] On node 0 totalpages: 524000 [17179569.184000] DMA zone: 4096 pages, LIFO batch:0 [17179569.184000] DMA32 zone: 0 pages, LIFO batch:0 [17179569.184000] Normal zone: 225280 pages, LIFO batch:31 [17179569.184000] HighMem zone: 294624 pages, LIFO batch:31 [17179569.184000] DMI present. [17179569.184000] ACPI: RSDP (v002 LENOVO ) @ 0x000f6860 [17179569.184000] ACPI: XSDT (v001 LENOVO TP-7F 0x00001100 LTP 0x00000000) @ 0x7fee32d1 [17179569.184000] ACPI: FADT (v003 LENOVO TP-7F 0x00001100 LNVO 0x00000001) @ 0x7fee3400 [17179569.184000] ACPI: SSDT (v001 LENOVO TP-7F 0x00001100 MSFT 0x0100000e) @ 0x7fee35b4 [17179569.184000] ACPI: ECDT (v001 LENOVO TP-7F 0x00001100 LNVO 0x00000001) @ 0x7feefd9a [17179569.184000] ACPI: TCPA (v002 LENOVO TP-7F 0x00001100 LNVO 0x00000001) @ 0x7feefdec [17179569.184000] ACPI: MADT (v001 LENOVO TP-7F 0x00001100 LNVO 0x00000001) @ 0x7feefe1e [17179569.184000] ACPI: MCFG (v001 LENOVO TP-7F 0x00001100 LNVO 0x00000001) @ 0x7feefe86 [17179569.184000] ACPI: HPET (v001 LENOVO TP-7F 0x00001100 LNVO 0x00000001) @ 0x7feefec4 [17179569.184000] ACPI: BOOT (v001 LENOVO TP-7F 0x00001100 LTP 0x00000001) @ 0x7feeffd8 [17179569.184000] ACPI: SSDT (v001 LENOVO TP-7F 0x00001100 INTL 0x20050513) @ 0x7fef297b [17179569.184000] ACPI: SSDT (v001 LENOVO TP-7F 0x00001100 INTL 0x20050513) @ 0x7fef2e82 [17179569.184000] ACPI: DSDT (v001 LENOVO TP-7F 0x00001100 MSFT 0x0100000e) @ 0x00000000 [17179569.184000] ACPI: PM-Timer IO Port: 0x1008 [17179569.184000] ACPI: Local APIC address 0xfee00000 [17179569.184000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [17179569.184000] Processor #0 6:14 APIC version 20 [17179569.184000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [17179569.184000] Processor #1 6:14 APIC version 20 [17179569.184000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [17179569.184000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [17179569.184000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [17179569.184000] IOAPIC[0]: apic_id 1 already used, trying 2 [17179569.184000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [17179569.184000] ACPI: IRQ0 used by override. [17179569.184000] ACPI: IRQ2 used by override. [17179569.184000] ACPI: IRQ9 used by override. [17179569.184000] Enabling APIC mode: Flat. Using 1 I/O APICs [17179569.184000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [17179569.184000] Using ACPI (MADT) for SMP configuration information [17179569.184000] Allocating PCI resources starting at 88000000 (gap: 80000000:70000000) [17179569.184000] Built 1 zonelists [17179569.184000] Kernel command line: root=/dev/sda5 ro quiet nofb [17179569.184000] mapped APIC to ffffd000 (fee00000) [17179569.184000] mapped IOAPIC to ffffc000 (fec00000) [17179569.184000] Initializing CPU#0 [17179569.184000] PID hash table entries: 4096 (order: 12, 65536 bytes) [17179569.184000] Console: colour VGA+ 80x25 [17179569.184000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [17179569.184000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [17179569.184000] Memory: 2065020k/2096000k available (2115k kernel code, 29852k reserved, 595k data, 332k init, 1178496k highmem) [17179569.184000] Checking if this processor honours the WP bit even in supervisor mode... Ok. [17179569.184000] Detected 1995.519 MHz processor. [17179569.184000] Using pmtmr for high-res timesource [17179570.684000] Calibrating delay using timer specific routine.. 3996.78 BogoMIPS (lpj=7993567) [17179570.684000] Security Framework v1.0.0 initialized [17179570.684000] SELinux: Disabled at boot. [17179570.684000] Mount-cache hash table entries: 512 [17179570.684000] CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000 [17179570.684000] CPU: After vendor identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000 [17179570.684000] monitor/mwait feature present. [17179570.684000] using mwait in idle threads. [17179570.684000] CPU: L1 I cache: 32K, L1 D cache: 32K [17179570.684000] CPU: L2 cache: 2048K [17179570.684000] CPU: Hyper-Threading is disabled [17179570.684000] CPU: After all inits, caps: bfe9fbff 00100000 00000000 00000040 0000c1a9 00000000 00000000 [17179570.684000] mtrr: v2.0 (20020519) [17179570.684000] Enabling fast FPU save and restore... done. [17179570.684000] Enabling unmasked SIMD FPU exception support... done. [17179570.684000] Checking 'hlt' instruction... OK. [17179570.700000] SMP alternatives: switching to UP code [17179570.700000] checking if image is initramfs... it is [17179571.200000] Freeing initrd memory: 6807k freed [17179571.204000] ACPI: Looking for DSDT ... not found! [17179571.224000] CPU0: Intel Genuine Intel(R) CPU T2500 @ 2.00GHz stepping 08 [17179571.224000] SMP alternatives: switching to SMP code [17179571.224000] Booting processor 1/1 eip 3000 [17179571.232000] Initializing CPU#1 [17179571.312000] Calibrating delay using timer specific routine.. 3990.40 BogoMIPS (lpj=7980806) [17179571.312000] CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000 [17179571.312000] CPU: After vendor identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000 [17179571.312000] monitor/mwait feature present. [17179571.312000] CPU: L1 I cache: 32K, L1 D cache: 32K [17179571.312000] CPU: L2 cache: 2048K [17179571.312000] CPU: Hyper-Threading is disabled [17179571.312000] CPU: After all inits, caps: bfe9fbff 00100000 00000000 00000040 0000c1a9 00000000 00000000 [17179571.312000] CPU1: Intel Genuine Intel(R) CPU T2500 @ 2.00GHz stepping 08 [17179571.312000] Total of 2 processors activated (7987.18 BogoMIPS). [17179571.312000] ENABLING IO-APIC IRQs [17179571.312000] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [17179571.456000] checking TSC synchronization across 2 CPUs: [17179571.456000] CPU#0 had 0 usecs TSC skew, fixed it up. [17179571.456000] CPU#1 had 0 usecs TSC skew, fixed it up. [17179571.460000] Brought up 2 CPUs [17179571.460000] NET: Registered protocol family 16 [17179571.460000] EISA bus registered [17179571.460000] ACPI: bus type pci registered [17179571.460000] PCI: PCI BIOS revision 2.10 entry at 0xfd84b, last bus=24 [17179571.460000] PCI: Using MMCONFIG [17179571.460000] ACPI: Subsystem revision 20051216 [17179571.460000] ACPI: Found ECDT [17179571.568000] ACPI: Interpreter enabled [17179571.568000] ACPI: Using IOAPIC for interrupt routing [17179571.568000] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11) [17179571.568000] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11) [17179571.568000] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11) [17179571.568000] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11) [17179571.568000] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11) [17179571.572000] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11) [17179571.572000] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11) [17179571.572000] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11) [17179571.572000] ACPI: PCI Root Bridge [PCI0] (0000:00) [17179571.572000] PCI: Probing PCI hardware (bus 00) [17179571.576000] PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 [17179571.576000] Boot video device is 0000:01:00.0 [17179571.576000] PCI: Transparent bridge - 0000:00:1e.0 [17179571.576000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [17179571.580000] ACPI: Embedded Controller [EC] (gpe 28) interrupt mode. [17179571.580000] ACPI: Power Resource [PUBS] (on) [17179571.584000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] [17179571.584000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT] [17179571.584000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT] [17179571.584000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT] [17179571.584000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT] [17179571.584000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] [17179571.588000] Linux Plug and Play Support v0.97 (c) Adam Belay [17179571.588000] pnp: PnP ACPI init [17179571.592000] pnp: PnP ACPI: found 12 devices [17179571.592000] PnPBIOS: Disabled by ACPI PNP [17179571.592000] PCI: Using ACPI for IRQ routing [17179571.592000] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [17179571.656000] PCI: Bridge: 0000:00:01.0 [17179571.656000] IO window: 2000-2fff [17179571.656000] MEM window: ee000000-ee0fffff [17179571.656000] PREFETCH window: d8000000-dfffffff [17179571.656000] PCI: Bridge: 0000:00:1c.0 [17179571.656000] IO window: disabled. [17179571.656000] MEM window: ee100000-ee1fffff [17179571.656000] PREFETCH window: disabled. [17179571.656000] PCI: Bridge: 0000:00:1c.1 [17179571.656000] IO window: 3000-4fff [17179571.656000] MEM window: ec000000-edffffff [17179571.656000] PREFETCH window: e4000000-e40fffff [17179571.656000] PCI: Bridge: 0000:00:1c.2 [17179571.656000] IO window: 5000-6fff [17179571.656000] MEM window: e8000000-e9ffffff [17179571.656000] PREFETCH window: e4100000-e41fffff [17179571.656000] PCI: Bridge: 0000:00:1c.3 [17179571.656000] IO window: 7000-8fff [17179571.656000] MEM window: ea000000-ebffffff [17179571.656000] PREFETCH window: e4200000-e42fffff [17179571.656000] PCI: Bus 22, cardbus bridge: 0000:15:00.0 [17179571.656000] IO window: 00009000-000090ff [17179571.656000] IO window: 00009400-000094ff [17179571.656000] PREFETCH window: e0000000-e1ffffff [17179571.656000] MEM window: e6000000-e7ffffff [17179571.656000] PCI: Bridge: 0000:00:1e.0 [17179571.656000] IO window: 9000-cfff [17179571.656000] MEM window: e4300000-e7ffffff [17179571.656000] PREFETCH window: e0000000-e3ffffff [17179571.656000] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 169 [17179571.656000] PCI: Setting latency timer of device 0000:00:01.0 to 64 [17179571.656000] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 20 (level, low) -> IRQ 177 [17179571.656000] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [17179571.656000] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 21 (level, low) -> IRQ 185 [17179571.656000] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [17179571.656000] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 22 (level, low) -> IRQ 193 [17179571.656000] PCI: Setting latency timer of device 0000:00:1c.2 to 64 [17179571.656000] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 23 (level, low) -> IRQ 201 [17179571.656000] PCI: Setting latency timer of device 0000:00:1c.3 to 64 [17179571.656000] PCI: Enabling device 0000:00:1e.0 (0005 -> 0007) [17179571.656000] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [17179571.656000] ACPI: PCI Interrupt 0000:15:00.0[A] -> GSI 16 (level, low) -> IRQ 169 [17179571.660000] Simple Boot Flag at 0x35 set to 0x1 [17179571.660000] audit: initializing netlink socket (disabled) [17179571.660000] audit(1158769402.656:1): initialized [17179571.660000] highmem bounce pool size: 64 pages [17179571.660000] VFS: Disk quotas dquot_6.5.1 [17179571.660000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [17179571.660000] Initializing Cryptographic API [17179571.660000] io scheduler noop registered [17179571.660000] io scheduler anticipatory registered [17179571.660000] io scheduler deadline registered [17179571.660000] io scheduler cfq registered [17179571.660000] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 169 [17179571.660000] PCI: Setting latency timer of device 0000:00:01.0 to 64 [17179571.660000] assign_interrupt_mode Found MSI capability [17179571.660000] Allocate Port Service[pcie00] [17179571.660000] Allocate Port Service[pcie03] [17179571.660000] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 20 (level, low) -> IRQ 177 [17179571.660000] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [17179571.660000] assign_interrupt_mode Found MSI capability [17179571.660000] Allocate Port Service[pcie00] [17179571.660000] Allocate Port Service[pcie02] [17179571.660000] Allocate Port Service[pcie03] [17179571.660000] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 21 (level, low) -> IRQ 185 [17179571.660000] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [17179571.660000] assign_interrupt_mode Found MSI capability [17179571.660000] Allocate Port Service[pcie00] [17179571.660000] Allocate Port Service[pcie02] [17179571.660000] Allocate Port Service[pcie03] [17179571.660000] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 22 (level, low) -> IRQ 193 [17179571.660000] PCI: Setting latency timer of device 0000:00:1c.2 to 64 [17179571.660000] assign_interrupt_mode Found MSI capability [17179571.660000] Allocate Port Service[pcie00] [17179571.660000] Allocate Port Service[pcie02] [17179571.660000] Allocate Port Service[pcie03] [17179571.660000] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 23 (level, low) -> IRQ 201 [17179571.660000] PCI: Setting latency timer of device 0000:00:1c.3 to 64 [17179571.660000] assign_interrupt_mode Found MSI capability [17179571.660000] Allocate Port Service[pcie00] [17179571.660000] Allocate Port Service[pcie02] [17179571.660000] Allocate Port Service[pcie03] [17179571.660000] isapnp: Scanning for PnP cards... [17179572.016000] isapnp: No Plug & Play device found [17179572.032000] Real Time Clock Driver v1.12 [17179572.032000] hpet_acpi_add: no address or irqs in _CRS [17179572.032000] PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [17179572.036000] serio: i8042 AUX port at 0x60,0x64 irq 12 [17179572.036000] serio: i8042 KBD port at 0x60,0x64 irq 1 [17179572.036000] Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled [17179572.036000] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a NS16550A [17179572.040000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [17179572.040000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [17179572.040000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [17179572.040000] mice: PS/2 mouse device common for all mice [17179572.040000] EISA: Probing bus 0 at eisa.0 [17179572.040000] Cannot allocate resource for EISA slot 1 [17179572.040000] Cannot allocate resource for EISA slot 2 [17179572.040000] Cannot allocate resource for EISA slot 3 [17179572.040000] Cannot allocate resource for EISA slot 4 [17179572.040000] Cannot allocate resource for EISA slot 5 [17179572.040000] Cannot allocate resource for EISA slot 6 [17179572.040000] Cannot allocate resource for EISA slot 7 [17179572.040000] Cannot allocate resource for EISA slot 8 [17179572.040000] EISA: Detected 0 cards. [17179572.040000] NET: Registered protocol family 2 [17179572.056000] input: AT Translated Set 2 keyboard as /class/input/input0 [17179572.080000] IP route cache hash table entries: 65536 (order: 6, 262144 bytes) [17179572.080000] TCP established hash table entries: 262144 (order: 9, 3145728 bytes) [17179572.080000] TCP bind hash table entries: 65536 (order: 7, 786432 bytes) [17179572.080000] TCP: Hash tables configured (established 262144 bind 65536) [17179572.080000] TCP reno registered [17179572.080000] TCP bic registered [17179572.080000] NET: Registered protocol family 1 [17179572.080000] NET: Registered protocol family 8 [17179572.080000] NET: Registered protocol family 20 [17179572.080000] Starting balanced_irq [17179572.080000] Using IPI No-Shortcut mode [17179572.080000] ACPI wakeup devices: [17179572.080000] LID SLPB EXP0 EXP1 EXP2 EXP3 PCI1 USB0 USB1 USB3 USB7 HDEF [17179572.080000] ACPI: (supports S0 S3 S4 S5) [17179572.080000] Freeing unused kernel memory: 332k freed [17179572.120000] Capability LSM initialized [17179572.152000] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [17179572.152000] ACPI: Processor [CPU0] (supports 8 throttling states) [17179572.152000] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) [17179572.152000] ACPI: Processor [CPU1] (supports 8 throttling states) [17179572.152000] ACPI: Thermal Zone [THM0] (52 C) [17179572.156000] ACPI: Thermal Zone [THM1] (53 C) [17179572.532000] ICH7: IDE controller at PCI slot 0000:00:1f.1 [17179572.532000] ACPI: PCI Interrupt 0000:00:1f.1[C] -> GSI 16 (level, low) -> IRQ 169 [17179572.532000] ICH7: chipset revision 2 [17179572.532000] ICH7: not 100% native mode: will probe irqs later [17179572.532000] ide0: BM-DMA at 0x1880-0x1887, BIOS settings: hda:DMA, hdb:pio [17179572.532000] Probing IDE interface ide0... [17179573.268000] hda: MATSHITADVD-RAM UJ-850, ATAPI CD/DVD-ROM drive [17179573.604000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [17179573.612000] hda: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33) [17179573.612000] Uniform CD-ROM driver Revision: 3.20 [17179573.652000] SCSI subsystem initialized [17179573.652000] ACPI: bus type scsi registered [17179573.652000] libata version 1.20 loaded. [17179573.652000] ahci 0000:00:1f.2: version 1.2 [17179573.652000] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 16 (level, low) -> IRQ 169 [17179579.472000] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [17179579.472000] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x1 impl SATA mode [17179579.472000] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part [17179579.472000] ata1: SATA max UDMA/133 cmd 0xF8876500 ctl 0x0 bmdma 0x0 irq 66 [17179579.472000] ata2: SATA max UDMA/133 cmd 0xF8876580 ctl 0x0 bmdma 0x0 irq 66 [17179579.472000] ata3: SATA max UDMA/133 cmd 0xF8876600 ctl 0x0 bmdma 0x0 irq 66 [17179579.472000] ata4: SATA max UDMA/133 cmd 0xF8876680 ctl 0x0 bmdma 0x0 irq 66 [17179579.676000] ata1: dev 0 cfg 00:045a 49:2f00 82:346b 83:7f09 84:6063 85:3469 86:be09 87:6063 88:043f 93:0000 [17179579.676000] ata1: dev 0 ATA-7, max UDMA/100, 195371568 sectors: LBA48 [17179579.676000] sata_get_dev_handle: SATA dev addr=0x1f0002, handle=0xdffdf980 [17179579.684000] ata1: dev 0 configured for UDMA/100 [17179579.684000] sata_get_dev_handle: SATA dev addr=0x1f0002, handle=0xdffdf980 [17179579.688000] scsi0 : ahci [17179579.892000] ata2: no device found (phy stat 00000000) [17179579.892000] scsi1 : ahci [17179580.096000] ata3: no device found (phy stat 00000000) [17179580.096000] scsi2 : ahci [17179580.300000] ata4: no device found (phy stat 00000000) [17179580.300000] scsi3 : ahci [17179580.300000] Vendor: ATA Model: FUJITSU MHV2100B Rev: 0084 [17179580.300000] Type: Direct-Access ANSI SCSI revision: 05 [17179580.304000] Driver 'sd' needs updating - please use bus_type methods [17179580.304000] SCSI device sda: 195371568 512-byte hdwr sectors (100030 MB) [17179580.304000] SCSI device sda: drive cache: write back [17179580.304000] SCSI device sda: 195371568 512-byte hdwr sectors (100030 MB) [17179580.304000] SCSI device sda: drive cache: write back [17179580.304000] sda: sda1 sda2 sda3 < sda5 sda6 sda7 > [17179580.420000] sd 0:0:0:0: Attached scsi disk sda [17179580.812000] usbcore: registered new driver usbfs [17179580.812000] usbcore: registered new driver hub [17179580.812000] USB Universal Host Controller Interface driver v2.3 [17179580.812000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 169 [17179580.812000] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [17179580.812000] uhci_hcd 0000:00:1d.0: UHCI Host Controller [17179580.812000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [17179580.812000] uhci_hcd 0000:00:1d.0: irq 169, io base 0x00001800 [17179580.812000] hub 1-0:1.0: USB hub found [17179580.812000] hub 1-0:1.0: 2 ports detected [17179580.856000] ieee1394: Initialized config rom entry `ip1394' [17179580.916000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 74 [17179580.916000] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [17179580.916000] uhci_hcd 0000:00:1d.1: UHCI Host Controller [17179580.916000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 [17179580.916000] uhci_hcd 0000:00:1d.1: irq 74, io base 0x00001820 [17179580.916000] hub 2-0:1.0: USB hub found [17179580.916000] hub 2-0:1.0: 2 ports detected [17179581.020000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 82 [17179581.020000] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [17179581.020000] uhci_hcd 0000:00:1d.2: UHCI Host Controller [17179581.020000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 [17179581.020000] uhci_hcd 0000:00:1d.2: irq 82, io base 0x00001840 [17179581.020000] hub 3-0:1.0: USB hub found [17179581.020000] hub 3-0:1.0: 2 ports detected [17179581.124000] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 90 [17179581.124000] PCI: Setting latency timer of device 0000:00:1d.3 to 64 [17179581.124000] uhci_hcd 0000:00:1d.3: UHCI Host Controller [17179581.124000] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 [17179581.124000] uhci_hcd 0000:00:1d.3: irq 90, io base 0x00001860 [17179581.124000] hub 4-0:1.0: USB hub found [17179581.124000] hub 4-0:1.0: 2 ports detected [17179581.156000] usb 1-1: new low speed USB device using uhci_hcd and address 2 [17179581.228000] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 19 (level, low) -> IRQ 90 [17179581.228000] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [17179581.228000] ehci_hcd 0000:00:1d.7: EHCI Host Controller [17179581.228000] ehci_hcd 0000:00:1d.7: debug port 1 [17179581.228000] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [17179581.228000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 [17179581.228000] ehci_hcd 0000:00:1d.7: irq 90, io mem 0xee404000 [17179581.232000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [17179581.232000] hub 5-0:1.0: USB hub found [17179581.232000] hub 5-0:1.0: 8 ports detected [17179581.336000] ohci1394: $Rev: 1313 $ Ben Collins [17179581.336000] PCI: Enabling device 0000:15:00.1 (0000 -> 0002) [17179581.336000] ACPI: PCI Interrupt 0000:15:00.1[B] -> GSI 17 (level, low) -> IRQ 74 [17179581.336000] PCI: Setting latency timer of device 0000:15:00.1 to 64 [17179581.384000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[74] MMIO=[e4302000-e43027ff] Max Packet=[2048] [17179581.404000] Probing IDE interface ide1... [17179581.680000] usb 1-1: device not accepting address 2, error -71 [17179581.992000] Attempting manual resume [17179582.000000] EXT3-fs: INFO: recovery required on readonly filesystem. [17179582.000000] EXT3-fs: write access will be enabled during recovery. [17179582.416000] usb 5-5: new high speed USB device using ehci_hcd and address 3 [17179582.548000] hub 5-5:1.0: USB hub found [17179582.548000] hub 5-5:1.0: 2 ports detected [17179582.608000] EXT3-fs: recovery complete. [17179582.608000] kjournald starting. Commit interval 5 seconds [17179582.608000] EXT3-fs: mounted filesystem with ordered data mode. [17179582.656000] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00061b002023f993] [17179583.076000] usb 1-1: new low speed USB device using uhci_hcd and address 4 [17179583.448000] usb 5-5.2: new high speed USB device using ehci_hcd and address 5 [17179583.780000] usb 3-2: new full speed USB device using uhci_hcd and address 2 [17179588.784000] sd 0:0:0:0: Attached scsi generic sg0 type 0 [17179589.348000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [17179589.372000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [17179589.396000] Linux agpgart interface v0.101 (c) Dave Jones [17179589.408000] agpgart: Detected an Intel 945GM Chipset. [17179589.424000] agpgart: AGP aperture is 256M @ 0x0 [17179589.476000] hw_random: RNG not detected [17179589.628000] tg3.c:v3.47 (Dec 28, 2005) [17179589.628000] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 169 [17179589.628000] PCI: Setting latency timer of device 0000:02:00.0 to 64 [17179589.632000] eth0: Tigon3 [partno(BCM95752m) rev 6002 PHY(5752)] (PCI Express) 10/100/1000BaseT Ethernet 00:16:36:79:4d:2d [17179589.632000] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[1] [17179589.632000] eth0: dma_rwctrl[76180000] [17179589.680000] ieee80211_1_1_13_crypt: registered algorithm 'NULL' [17179589.684000] ieee80211_1_1_13: 802.11 data/management/control stack, 1.1.13 [17179589.684000] ieee80211_1_1_13: Copyright (C) 2004-2005 Intel Corporation [17179589.788000] ACPI: PCI Interrupt 0000:00:1b.0[B] -> GSI 17 (level, low) -> IRQ 74 [17179589.788000] PCI: Setting latency timer of device 0000:00:1b.0 to 64 [17179589.792000] ieee80211_crypt: registered algorithm 'NULL' [17179589.792000] ieee80211: 802.11 data/management/control stack, git-1.1.7 [17179589.792000] ieee80211: Copyright (C) 2004-2005 Intel Corporation [17179589.824000] ipw3945: Intel(R) PRO/Wireless 3945 Network Connection driver for Linux, 1.0.5m [17179589.824000] ipw3945: Copyright(c) 2003-2006 Intel Corporation [17179589.844000] usbcore: registered new driver hiddev [17179589.860000] sdhci: Secure Digital Host Controller Interface driver, 0.10 [17179589.860000] sdhci: Copyright(c) Pierre Ossman [17179589.860000] input: Logitech Optical USB Mouse as /class/input/input1 [17179589.860000] input: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:1d.0-1 [17179589.860000] usbcore: registered new driver usbhid [17179589.860000] drivers/usb/input/hid-core.c: v2.6:USB HID core driver [17179589.868000] input: PC Speaker as /class/input/input2 [17179589.940000] ts: Compaq touchscreen protocol output [17179590.112000] irda_init() [17179590.112000] NET: Registered protocol family 23 [17179590.136000] nsc_ircc_pnp_probe() : From PnP, found firbase 0x2F8 ; irq 3 ; dma 3. [17179590.136000] nsc-ircc, chip->init [17179590.136000] nsc-ircc, Found chip at base=0x164e [17179590.136000] nsc-ircc, driver loaded (Dag Brattli) [17179590.136000] nsc_ircc_open(), can't get iobase of 0x2f8 [17179590.136000] nsc-ircc, Found chip at base=0x164e [17179590.136000] nsc-ircc, driver loaded (Dag Brattli) [17179590.136000] nsc_ircc_open(), can't get iobase of 0x2f8 [17179590.140000] pnp: Device 00:09 disabled. [17179590.212000] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x81a0b1, caps: 0xa04793/0x300000 [17179590.212000] serio: Synaptics pass-through port at isa0060/serio1/input0 [17179590.256000] input: SynPS/2 Synaptics TouchPad as /class/input/input3 [17179590.324000] ACPI: PCI Interrupt 0000:15:00.0[A] -> GSI 16 (level, low) -> IRQ 169 [17179590.324000] Yenta: CardBus bridge found at 0000:15:00.0 [17aa:2028] [17179590.324000] ACPI: PCI Interrupt 0000:03:00.0[A] -> <6>Yenta: Using INTVAL to route CSC interrupts to PCI [17179590.324000] Yenta: Routing CardBus interrupts to ISA [17179590.324000] GSI 17 (level, low) -> IRQ 74 [17179590.324000] Yenta TI: socket 0000:15:00.0, mfunc 0x01db1b22, devctl 0x64 [17179590.324000] PCI: Setting latency timer of device 0000:03:00.0 to 64 [17179590.324000] ipw3945: Detected Intel PRO/Wireless 3945ABG Network Connection [17179590.560000] Yenta: ISA IRQ mask 0x0cf8, PCI irq 169 [17179590.560000] Socket status: 30000086 [17179590.560000] Yenta: Raising subordinate bus# of parent bus (#15) from #18 to #19 [17179590.560000] pcmcia: parent PCI bridge I/O window: 0x9000 - 0xcfff [17179590.560000] cs: IO port probe 0x9000-0xcfff: clean. [17179590.560000] pcmcia: parent PCI bridge Memory window: 0xe4300000 - 0xe7ffffff [17179590.560000] pcmcia: parent PCI bridge Memory window: 0xe0000000 - 0xe3ffffff [17179590.580000] ACPI: PCI Interrupt 0000:15:00.3[A] -> GSI 16 (level, low) -> IRQ 169 [17179590.580000] PCI: Setting latency timer of device 0000:15:00.3 to 64 [17179590.632000] sdhci: ============== REGISTER DUMP ============== [17179590.632000] sdhci: Sys addr: 0x00000000 | Version: 0x00008900 [17179590.632000] sdhci: Blk size: 0x00000000 | Blk cnt: 0x00000000 [17179590.632000] sdhci: Argument: 0x00000000 | Trn mode: 0x00000000 [17179590.632000] sdhci: Present: 0x000a0000 | Host ctl: 0x00000000 [17179590.632000] sdhci: Power: 0x00000000 | Blk gap: 0x00000000 [17179590.632000] sdhci: Walk up: 0x00000000 | Clock: 0x00000000 [17179590.632000] sdhci: Timeout: 0x0000000e | Int stat: 0x00000000 [17179590.632000] sdhci: Int enab: 0x11ff00cf | Sig enab: 0x11ff00cf [17179590.632000] sdhci: AC12 err: 0x00000000 | Slot int: 0x00000000 [17179590.632000] sdhci: Caps: 0x01e030b0 | Max curr: 0x0000007d [17179590.632000] sdhci: =========================================== [17179590.684000] mmc0: SDHCI at 0xe4302800 irq 169 DMA [17179591.064000] cs: IO port probe 0x100-0x3af: clean. [17179591.064000] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7 [17179591.068000] cs: IO port probe 0x820-0x8ff: clean. [17179591.068000] cs: IO port probe 0xc00-0xcf7: clean. [17179591.068000] cs: IO port probe 0xa00-0xaff: clean. [17179591.212000] hda_intel: azx_get_response timeout, switching to single_cmd mode... [17179591.500000] ipw3945: Detected geography ABG (13 802.11bg channels, 23 802.11a channels) [17179591.640000] NET: Registered protocol family 17 [17179592.160000] tg3: eth0: Link is up at 100 Mbps, full duplex. [17179592.160000] tg3: eth0: Flow control is on for TX and on for RX. [17179594.120000] **** SET: Misaligned resource pointer: f71f3242 Type 00 Len 42 [17179594.120000] **** SET: Misaligned resource pointer: f71f32c6 Type 07 Len 0 [17179594.120000] pnp: Device 00:09 activated. [17179594.120000] nsc_ircc_pnp_probe() : From PnP, found firbase 0x2F8 ; irq 3 ; dma 3. [17179594.120000] nsc-ircc, chip->init [17179594.120000] nsc-ircc, Found chip at base=0x164e [17179594.120000] nsc-ircc, driver loaded (Dag Brattli) [17179594.120000] nsc_ircc_open(), can't get iobase of 0x2f8 [17179594.120000] nsc-ircc, Found chip at base=0x164e [17179594.120000] nsc-ircc, driver loaded (Dag Brattli) [17179594.120000] nsc_ircc_open(), can't get iobase of 0x2f8 [17179594.120000] pnp: Device 00:09 disabled. [17179594.180000] sbp2: $Rev: 1306 $ Ben Collins [17179594.180000] ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1) [17179594.180000] ieee1394: sbp2: Try serialize_io=0 for better performance [17179594.352000] loop: loaded (max 8 devices) [17179594.388000] Adding 2096440k swap on /dev/sda6. Priority:-1 extents:1 across:2096440k [17179594.416000] EXT3 FS on sda5, internal journal [17179594.592000] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel at redhat.com [17179594.860000] cdrom: open failed. [17179595.964000] IBM TrackPoint firmware: 0x0e, buttons: 3/3 [17179596.248000] input: TPPS/2 IBM TrackPoint as /class/input/input4 [17179598.384000] NET: Registered protocol family 10 [17179598.384000] lo: Disabled Privacy Extensions [17179598.384000] IPv6 over IPv4 tunneling driver [17179604.284000] kjournald starting. Commit interval 5 seconds [17179604.284000] EXT3 FS on sda7, internal journal [17179604.284000] EXT3-fs: mounted filesystem with ordered data mode. [17179604.328000] NTFS driver 2.1.25 [Flags: R/O MODULE]. [17179604.412000] NTFS volume version 3.1. [17179604.680000] ttyS1: LSR safety check engaged! [17179604.684000] ttyS1: LSR safety check engaged! [17179605.296000] ACPI: AC Adapter [AC] (on-line) [17179605.304000] ACPI: Battery Slot [BAT0] (battery present) [17179605.384000] ACPI: Power Button (FF) [PWRF] [17179605.384000] ACPI: Lid Switch [LID] [17179605.384000] ACPI: Sleep Button (CM) [SLPB] [17179605.460000] ibm_acpi: IBM ThinkPad ACPI Extras v0.12a [17179605.460000] ibm_acpi: http://ibm-acpi.sf.net/ [17179605.464000] ibm_acpi: dock device not present [17179605.480000] pcc_acpi: loading... [17179605.580000] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) [17179605.580000] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) [17179606.008000] lp: driver loaded but no devices found [17179606.044000] ppdev: user-space parallel port driver [17179606.272000] apm: BIOS not found. [17179607.352000] ttyS1: LSR safety check engaged! [17179608.040000] Non-volatile memory driver v1.2 [17179608.060000] input: /usr/sbin/thinkpad-keys as /class/input/input5 [17179608.380000] Bluetooth: Core ver 2.8 [17179608.380000] NET: Registered protocol family 31 [17179608.380000] Bluetooth: HCI device and connection manager initialized [17179608.380000] Bluetooth: HCI socket layer initialized [17179608.404000] Bluetooth: L2CAP ver 2.8 [17179608.404000] Bluetooth: L2CAP socket layer initialized [17179608.408000] Bluetooth: RFCOMM socket layer initialized [17179608.408000] Bluetooth: RFCOMM TTY layer initialized [17179608.408000] Bluetooth: RFCOMM ver 1.7 [17179609.016000] eth0: no IPv6 routers present [17179610.964000] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel. [17179610.968000] [fglrx] Maximum main memory to use for locked dma buffers: 1897 MBytes. [17179610.968000] [fglrx] module loaded - fglrx 8.28.8 [Aug 17 2006] on minor 0 [17179610.992000] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 169 [17179612.660000] [fglrx] total GART = 134217728 [17179612.660000] [fglrx] free GART = 118226944 [17179612.660000] [fglrx] max single GART = 118226944 [17179612.660000] [fglrx] total LFB = 124686336 [17179612.660000] [fglrx] free LFB = 110088192 [17179612.660000] [fglrx] max single LFB = 110088192 [17179612.660000] [fglrx] total Inv = 0 [17179612.660000] [fglrx] free Inv = 0 [17179612.664000] [fglrx] max single Inv = 0 [17179612.664000] [fglrx] total TIM = 0 ** Tags added: cpufreq kernel smp ** Description changed: Binary package hint: linux-image-2.6.15-27-686 I got a kernel panic when I changed cpufreq governor from "conservative" to "ondemand". - echo ondemand > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governar + echo ondemand > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor I don't use powernowd, only kernel-governors (they suit my needs just fine, don't need userspace). The governor was set to "conservative" before it happened. My system is a dual-core T2500 Intel Centrino laptop (Lenovo Thinkpad Z61m). Details about system should be in the dmesg output pasted further down below. There are two CPU entries in sysfs: /sys/devices/system/cpu/cpu0/cpufreq/ /sys/devices/system/cpu/cpu1/cpufreq/ I usually change governor for both CPUs at the same time (but only for cpu0 in this case). ---- Kernel panic output: ---- [17249509.052000] Unable to handle kernel NULL pointer dereference at virtual address 0000001c [17249509.052000] printing eip: [17249509.052000] f8c2f8be [17249509.052000] *pde = 00000000 [17249509.052000] Oops: 0000 [#1] [17249509.052000] PREEMPT SMP [17249509.052000] Modules linked in: ext2 aes cryptoloop loop acpi_sbs i2c_acpi_ec i2c_core battery ac ibm_acpi thermal fan button ipw3945 ieee80211 ieee80211_1_1_13 ieee80211_1_1_13_crypt tg3 autofs4 michael_mic arc4 ieee80211_crypt_tkip fglrx rfcomm l2cap bluetooth ipv6 nvram uinput ppdev parport_pc lp parport cpufreq_stats video tc1100_wmi sony_acpi pcc_acpi hotkey dev_acpi container nls_utf8 ntfs dm_mod cpufreq_userspace cpufreq_powersave cpufreq_conservative cpufreq_ondemand speedstep_centrino freq_table sr_mod sbp2 af_packet irtty_sir sir_dev joydev pcmcia irda crc_ccitt tsdev yenta_socket rsrc_nonstatic pcspkr pcmcia_core psmouse usbhid serio_raw sdhci mmc_core ieee80211_crypt snd_hda_intel snd_hda_codec snd_pcm_oss snd_mixer_oss snd_pcm snd_timer snd soundcore snd_page_alloc intel_agp agpgart shpchp pci_hotplug evdev sg ext3 jbd ide_generic ohci1394 ieee1394 ehci_hcd uhci_hcd usbcore sd_mod ahci libata scsi_mod ide_cd cdrom piix generic processor fbcon tileblit font bitblit softcursor capability commoncap [17249509.052000] CPU: 1 [17249509.052000] EIP: 0060:[] Tainted: P VLI [17249509.052000] EFLAGS: 00010297 (2.6.15-27-686) [17249509.052000] EIP is at dbs_check_cpu+0x3ae/0x4e0 [cpufreq_conservative] [17249509.052000] eax: 00000000 ebx: c03fe5b8 ecx: 01e10f01 edx: 00000001 [17249509.052000] esi: f8c30f44 edi: c2328a40 ebp: 00000008 esp: e299df24 [17249509.052000] ds: 007b es: 007b ss: 0068 [17249509.052000] Process events/1 (pid: 14375, threadinfo=e299c000 task=f5c2fa90) [17249509.052000] Stack: c03a5350 00000008 00000001 f7568bc0 00000000 f8c30f44 c2328a40 00000000 [17249509.052000] f8c2fa6d 00000000 00000202 00000202 00000202 c0138703 00000000 e299df80 [17249509.052000] 00000000 c2328a50 c2328a58 c2328a68 e299c000 f8c30f40 f8c2f9f0 00000001 [17249509.052000] Call Trace: [17249509.052000] [] do_dbs_timer+0x7d/0xb0 [cpufreq_conservative] [17249509.052000] [] worker_thread+0x1b3/0x270 [17249509.052000] [] do_dbs_timer+0x0/0xb0 [cpufreq_conservative] [17249509.052000] [] default_wake_function+0x0/0x20 [17249509.052000] [] worker_thread+0x0/0x270 [17249509.052000] [] kthread+0xc8/0xd0 [17249509.052000] [] kthread+0x0/0xd0 [17249509.052000] [] kernel_thread_helper+0x5/0x10 [17249509.052000] Code: 0f bc d0 b8 08 00 00 00 83 fa 09 0f 4d d0 83 fa 07 0f 87 b5 fc ff ff bb b8 e5 3f c0 8b 04 95 20 10 40 c0 bd 08 00 00 00 8b 04 03 <8b> 40 1c 89 6c 24 04 c7 04 24 50 53 3a c0 89 04 95 e0 12 c3 f8 [17249509.052000] ---- dmesg ---- [17179569.184000] Linux version 2.6.15-27-686 (buildd at terranova) (gcc version 4.0.3 (Ubuntu 4.0.3-1ubuntu5)) #1 SMP PREEMPT Sat Sep 16 02:13:27 UTC 2006 [17179569.184000] BIOS-provided physical RAM map: [17179569.184000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable) [17179569.184000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) [17179569.184000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) [17179569.184000] BIOS-e820: 0000000000100000 - 000000007fee0000 (usable) [17179569.184000] BIOS-e820: 000000007fee0000 - 000000007fef0000 (ACPI data) [17179569.184000] BIOS-e820: 000000007fef0000 - 000000007ff00000 (ACPI NVS) [17179569.184000] BIOS-e820: 000000007ff00000 - 0000000080000000 (reserved) [17179569.184000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved) [17179569.184000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [17179569.184000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) [17179569.184000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) [17179569.184000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) [17179569.184000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [17179569.184000] BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved) [17179569.184000] 1150MB HIGHMEM available. [17179569.184000] 896MB LOWMEM available. [17179569.184000] found SMP MP-table at 000f68a0 [17179569.184000] On node 0 totalpages: 524000 [17179569.184000] DMA zone: 4096 pages, LIFO batch:0 [17179569.184000] DMA32 zone: 0 pages, LIFO batch:0 [17179569.184000] Normal zone: 225280 pages, LIFO batch:31 [17179569.184000] HighMem zone: 294624 pages, LIFO batch:31 [17179569.184000] DMI present. [17179569.184000] ACPI: RSDP (v002 LENOVO ) @ 0x000f6860 [17179569.184000] ACPI: XSDT (v001 LENOVO TP-7F 0x00001100 LTP 0x00000000) @ 0x7fee32d1 [17179569.184000] ACPI: FADT (v003 LENOVO TP-7F 0x00001100 LNVO 0x00000001) @ 0x7fee3400 [17179569.184000] ACPI: SSDT (v001 LENOVO TP-7F 0x00001100 MSFT 0x0100000e) @ 0x7fee35b4 [17179569.184000] ACPI: ECDT (v001 LENOVO TP-7F 0x00001100 LNVO 0x00000001) @ 0x7feefd9a [17179569.184000] ACPI: TCPA (v002 LENOVO TP-7F 0x00001100 LNVO 0x00000001) @ 0x7feefdec [17179569.184000] ACPI: MADT (v001 LENOVO TP-7F 0x00001100 LNVO 0x00000001) @ 0x7feefe1e [17179569.184000] ACPI: MCFG (v001 LENOVO TP-7F 0x00001100 LNVO 0x00000001) @ 0x7feefe86 [17179569.184000] ACPI: HPET (v001 LENOVO TP-7F 0x00001100 LNVO 0x00000001) @ 0x7feefec4 [17179569.184000] ACPI: BOOT (v001 LENOVO TP-7F 0x00001100 LTP 0x00000001) @ 0x7feeffd8 [17179569.184000] ACPI: SSDT (v001 LENOVO TP-7F 0x00001100 INTL 0x20050513) @ 0x7fef297b [17179569.184000] ACPI: SSDT (v001 LENOVO TP-7F 0x00001100 INTL 0x20050513) @ 0x7fef2e82 [17179569.184000] ACPI: DSDT (v001 LENOVO TP-7F 0x00001100 MSFT 0x0100000e) @ 0x00000000 [17179569.184000] ACPI: PM-Timer IO Port: 0x1008 [17179569.184000] ACPI: Local APIC address 0xfee00000 [17179569.184000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [17179569.184000] Processor #0 6:14 APIC version 20 [17179569.184000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [17179569.184000] Processor #1 6:14 APIC version 20 [17179569.184000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [17179569.184000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [17179569.184000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [17179569.184000] IOAPIC[0]: apic_id 1 already used, trying 2 [17179569.184000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [17179569.184000] ACPI: IRQ0 used by override. [17179569.184000] ACPI: IRQ2 used by override. [17179569.184000] ACPI: IRQ9 used by override. [17179569.184000] Enabling APIC mode: Flat. Using 1 I/O APICs [17179569.184000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [17179569.184000] Using ACPI (MADT) for SMP configuration information [17179569.184000] Allocating PCI resources starting at 88000000 (gap: 80000000:70000000) [17179569.184000] Built 1 zonelists [17179569.184000] Kernel command line: root=/dev/sda5 ro quiet nofb [17179569.184000] mapped APIC to ffffd000 (fee00000) [17179569.184000] mapped IOAPIC to ffffc000 (fec00000) [17179569.184000] Initializing CPU#0 [17179569.184000] PID hash table entries: 4096 (order: 12, 65536 bytes) [17179569.184000] Console: colour VGA+ 80x25 [17179569.184000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [17179569.184000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [17179569.184000] Memory: 2065020k/2096000k available (2115k kernel code, 29852k reserved, 595k data, 332k init, 1178496k highmem) [17179569.184000] Checking if this processor honours the WP bit even in supervisor mode... Ok. [17179569.184000] Detected 1995.519 MHz processor. [17179569.184000] Using pmtmr for high-res timesource [17179570.684000] Calibrating delay using timer specific routine.. 3996.78 BogoMIPS (lpj=7993567) [17179570.684000] Security Framework v1.0.0 initialized [17179570.684000] SELinux: Disabled at boot. [17179570.684000] Mount-cache hash table entries: 512 [17179570.684000] CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000 [17179570.684000] CPU: After vendor identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000 [17179570.684000] monitor/mwait feature present. [17179570.684000] using mwait in idle threads. [17179570.684000] CPU: L1 I cache: 32K, L1 D cache: 32K [17179570.684000] CPU: L2 cache: 2048K [17179570.684000] CPU: Hyper-Threading is disabled [17179570.684000] CPU: After all inits, caps: bfe9fbff 00100000 00000000 00000040 0000c1a9 00000000 00000000 [17179570.684000] mtrr: v2.0 (20020519) [17179570.684000] Enabling fast FPU save and restore... done. [17179570.684000] Enabling unmasked SIMD FPU exception support... done. [17179570.684000] Checking 'hlt' instruction... OK. [17179570.700000] SMP alternatives: switching to UP code [17179570.700000] checking if image is initramfs... it is [17179571.200000] Freeing initrd memory: 6807k freed [17179571.204000] ACPI: Looking for DSDT ... not found! [17179571.224000] CPU0: Intel Genuine Intel(R) CPU T2500 @ 2.00GHz stepping 08 [17179571.224000] SMP alternatives: switching to SMP code [17179571.224000] Booting processor 1/1 eip 3000 [17179571.232000] Initializing CPU#1 [17179571.312000] Calibrating delay using timer specific routine.. 3990.40 BogoMIPS (lpj=7980806) [17179571.312000] CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000 [17179571.312000] CPU: After vendor identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000 [17179571.312000] monitor/mwait feature present. [17179571.312000] CPU: L1 I cache: 32K, L1 D cache: 32K [17179571.312000] CPU: L2 cache: 2048K [17179571.312000] CPU: Hyper-Threading is disabled [17179571.312000] CPU: After all inits, caps: bfe9fbff 00100000 00000000 00000040 0000c1a9 00000000 00000000 [17179571.312000] CPU1: Intel Genuine Intel(R) CPU T2500 @ 2.00GHz stepping 08 [17179571.312000] Total of 2 processors activated (7987.18 BogoMIPS). [17179571.312000] ENABLING IO-APIC IRQs [17179571.312000] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [17179571.456000] checking TSC synchronization across 2 CPUs: [17179571.456000] CPU#0 had 0 usecs TSC skew, fixed it up. [17179571.456000] CPU#1 had 0 usecs TSC skew, fixed it up. [17179571.460000] Brought up 2 CPUs [17179571.460000] NET: Registered protocol family 16 [17179571.460000] EISA bus registered [17179571.460000] ACPI: bus type pci registered [17179571.460000] PCI: PCI BIOS revision 2.10 entry at 0xfd84b, last bus=24 [17179571.460000] PCI: Using MMCONFIG [17179571.460000] ACPI: Subsystem revision 20051216 [17179571.460000] ACPI: Found ECDT [17179571.568000] ACPI: Interpreter enabled [17179571.568000] ACPI: Using IOAPIC for interrupt routing [17179571.568000] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11) [17179571.568000] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11) [17179571.568000] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11) [17179571.568000] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11) [17179571.568000] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11) [17179571.572000] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11) [17179571.572000] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11) [17179571.572000] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11) [17179571.572000] ACPI: PCI Root Bridge [PCI0] (0000:00) [17179571.572000] PCI: Probing PCI hardware (bus 00) [17179571.576000] PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 [17179571.576000] Boot video device is 0000:01:00.0 [17179571.576000] PCI: Transparent bridge - 0000:00:1e.0 [17179571.576000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [17179571.580000] ACPI: Embedded Controller [EC] (gpe 28) interrupt mode. [17179571.580000] ACPI: Power Resource [PUBS] (on) [17179571.584000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] [17179571.584000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT] [17179571.584000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT] [17179571.584000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT] [17179571.584000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT] [17179571.584000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] [17179571.588000] Linux Plug and Play Support v0.97 (c) Adam Belay [17179571.588000] pnp: PnP ACPI init [17179571.592000] pnp: PnP ACPI: found 12 devices [17179571.592000] PnPBIOS: Disabled by ACPI PNP [17179571.592000] PCI: Using ACPI for IRQ routing [17179571.592000] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [17179571.656000] PCI: Bridge: 0000:00:01.0 [17179571.656000] IO window: 2000-2fff [17179571.656000] MEM window: ee000000-ee0fffff [17179571.656000] PREFETCH window: d8000000-dfffffff [17179571.656000] PCI: Bridge: 0000:00:1c.0 [17179571.656000] IO window: disabled. [17179571.656000] MEM window: ee100000-ee1fffff [17179571.656000] PREFETCH window: disabled. [17179571.656000] PCI: Bridge: 0000:00:1c.1 [17179571.656000] IO window: 3000-4fff [17179571.656000] MEM window: ec000000-edffffff [17179571.656000] PREFETCH window: e4000000-e40fffff [17179571.656000] PCI: Bridge: 0000:00:1c.2 [17179571.656000] IO window: 5000-6fff [17179571.656000] MEM window: e8000000-e9ffffff [17179571.656000] PREFETCH window: e4100000-e41fffff [17179571.656000] PCI: Bridge: 0000:00:1c.3 [17179571.656000] IO window: 7000-8fff [17179571.656000] MEM window: ea000000-ebffffff [17179571.656000] PREFETCH window: e4200000-e42fffff [17179571.656000] PCI: Bus 22, cardbus bridge: 0000:15:00.0 [17179571.656000] IO window: 00009000-000090ff [17179571.656000] IO window: 00009400-000094ff [17179571.656000] PREFETCH window: e0000000-e1ffffff [17179571.656000] MEM window: e6000000-e7ffffff [17179571.656000] PCI: Bridge: 0000:00:1e.0 [17179571.656000] IO window: 9000-cfff [17179571.656000] MEM window: e4300000-e7ffffff [17179571.656000] PREFETCH window: e0000000-e3ffffff [17179571.656000] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 169 [17179571.656000] PCI: Setting latency timer of device 0000:00:01.0 to 64 [17179571.656000] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 20 (level, low) -> IRQ 177 [17179571.656000] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [17179571.656000] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 21 (level, low) -> IRQ 185 [17179571.656000] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [17179571.656000] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 22 (level, low) -> IRQ 193 [17179571.656000] PCI: Setting latency timer of device 0000:00:1c.2 to 64 [17179571.656000] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 23 (level, low) -> IRQ 201 [17179571.656000] PCI: Setting latency timer of device 0000:00:1c.3 to 64 [17179571.656000] PCI: Enabling device 0000:00:1e.0 (0005 -> 0007) [17179571.656000] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [17179571.656000] ACPI: PCI Interrupt 0000:15:00.0[A] -> GSI 16 (level, low) -> IRQ 169 [17179571.660000] Simple Boot Flag at 0x35 set to 0x1 [17179571.660000] audit: initializing netlink socket (disabled) [17179571.660000] audit(1158769402.656:1): initialized [17179571.660000] highmem bounce pool size: 64 pages [17179571.660000] VFS: Disk quotas dquot_6.5.1 [17179571.660000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [17179571.660000] Initializing Cryptographic API [17179571.660000] io scheduler noop registered [17179571.660000] io scheduler anticipatory registered [17179571.660000] io scheduler deadline registered [17179571.660000] io scheduler cfq registered [17179571.660000] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 169 [17179571.660000] PCI: Setting latency timer of device 0000:00:01.0 to 64 [17179571.660000] assign_interrupt_mode Found MSI capability [17179571.660000] Allocate Port Service[pcie00] [17179571.660000] Allocate Port Service[pcie03] [17179571.660000] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 20 (level, low) -> IRQ 177 [17179571.660000] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [17179571.660000] assign_interrupt_mode Found MSI capability [17179571.660000] Allocate Port Service[pcie00] [17179571.660000] Allocate Port Service[pcie02] [17179571.660000] Allocate Port Service[pcie03] [17179571.660000] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 21 (level, low) -> IRQ 185 [17179571.660000] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [17179571.660000] assign_interrupt_mode Found MSI capability [17179571.660000] Allocate Port Service[pcie00] [17179571.660000] Allocate Port Service[pcie02] [17179571.660000] Allocate Port Service[pcie03] [17179571.660000] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 22 (level, low) -> IRQ 193 [17179571.660000] PCI: Setting latency timer of device 0000:00:1c.2 to 64 [17179571.660000] assign_interrupt_mode Found MSI capability [17179571.660000] Allocate Port Service[pcie00] [17179571.660000] Allocate Port Service[pcie02] [17179571.660000] Allocate Port Service[pcie03] [17179571.660000] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 23 (level, low) -> IRQ 201 [17179571.660000] PCI: Setting latency timer of device 0000:00:1c.3 to 64 [17179571.660000] assign_interrupt_mode Found MSI capability [17179571.660000] Allocate Port Service[pcie00] [17179571.660000] Allocate Port Service[pcie02] [17179571.660000] Allocate Port Service[pcie03] [17179571.660000] isapnp: Scanning for PnP cards... [17179572.016000] isapnp: No Plug & Play device found [17179572.032000] Real Time Clock Driver v1.12 [17179572.032000] hpet_acpi_add: no address or irqs in _CRS [17179572.032000] PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [17179572.036000] serio: i8042 AUX port at 0x60,0x64 irq 12 [17179572.036000] serio: i8042 KBD port at 0x60,0x64 irq 1 [17179572.036000] Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled [17179572.036000] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a NS16550A [17179572.040000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [17179572.040000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [17179572.040000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [17179572.040000] mice: PS/2 mouse device common for all mice [17179572.040000] EISA: Probing bus 0 at eisa.0 [17179572.040000] Cannot allocate resource for EISA slot 1 [17179572.040000] Cannot allocate resource for EISA slot 2 [17179572.040000] Cannot allocate resource for EISA slot 3 [17179572.040000] Cannot allocate resource for EISA slot 4 [17179572.040000] Cannot allocate resource for EISA slot 5 [17179572.040000] Cannot allocate resource for EISA slot 6 [17179572.040000] Cannot allocate resource for EISA slot 7 [17179572.040000] Cannot allocate resource for EISA slot 8 [17179572.040000] EISA: Detected 0 cards. [17179572.040000] NET: Registered protocol family 2 [17179572.056000] input: AT Translated Set 2 keyboard as /class/input/input0 [17179572.080000] IP route cache hash table entries: 65536 (order: 6, 262144 bytes) [17179572.080000] TCP established hash table entries: 262144 (order: 9, 3145728 bytes) [17179572.080000] TCP bind hash table entries: 65536 (order: 7, 786432 bytes) [17179572.080000] TCP: Hash tables configured (established 262144 bind 65536) [17179572.080000] TCP reno registered [17179572.080000] TCP bic registered [17179572.080000] NET: Registered protocol family 1 [17179572.080000] NET: Registered protocol family 8 [17179572.080000] NET: Registered protocol family 20 [17179572.080000] Starting balanced_irq [17179572.080000] Using IPI No-Shortcut mode [17179572.080000] ACPI wakeup devices: [17179572.080000] LID SLPB EXP0 EXP1 EXP2 EXP3 PCI1 USB0 USB1 USB3 USB7 HDEF [17179572.080000] ACPI: (supports S0 S3 S4 S5) [17179572.080000] Freeing unused kernel memory: 332k freed [17179572.120000] Capability LSM initialized [17179572.152000] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [17179572.152000] ACPI: Processor [CPU0] (supports 8 throttling states) [17179572.152000] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) [17179572.152000] ACPI: Processor [CPU1] (supports 8 throttling states) [17179572.152000] ACPI: Thermal Zone [THM0] (52 C) [17179572.156000] ACPI: Thermal Zone [THM1] (53 C) [17179572.532000] ICH7: IDE controller at PCI slot 0000:00:1f.1 [17179572.532000] ACPI: PCI Interrupt 0000:00:1f.1[C] -> GSI 16 (level, low) -> IRQ 169 [17179572.532000] ICH7: chipset revision 2 [17179572.532000] ICH7: not 100% native mode: will probe irqs later [17179572.532000] ide0: BM-DMA at 0x1880-0x1887, BIOS settings: hda:DMA, hdb:pio [17179572.532000] Probing IDE interface ide0... [17179573.268000] hda: MATSHITADVD-RAM UJ-850, ATAPI CD/DVD-ROM drive [17179573.604000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [17179573.612000] hda: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33) [17179573.612000] Uniform CD-ROM driver Revision: 3.20 [17179573.652000] SCSI subsystem initialized [17179573.652000] ACPI: bus type scsi registered [17179573.652000] libata version 1.20 loaded. [17179573.652000] ahci 0000:00:1f.2: version 1.2 [17179573.652000] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 16 (level, low) -> IRQ 169 [17179579.472000] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [17179579.472000] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x1 impl SATA mode [17179579.472000] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part [17179579.472000] ata1: SATA max UDMA/133 cmd 0xF8876500 ctl 0x0 bmdma 0x0 irq 66 [17179579.472000] ata2: SATA max UDMA/133 cmd 0xF8876580 ctl 0x0 bmdma 0x0 irq 66 [17179579.472000] ata3: SATA max UDMA/133 cmd 0xF8876600 ctl 0x0 bmdma 0x0 irq 66 [17179579.472000] ata4: SATA max UDMA/133 cmd 0xF8876680 ctl 0x0 bmdma 0x0 irq 66 [17179579.676000] ata1: dev 0 cfg 00:045a 49:2f00 82:346b 83:7f09 84:6063 85:3469 86:be09 87:6063 88:043f 93:0000 [17179579.676000] ata1: dev 0 ATA-7, max UDMA/100, 195371568 sectors: LBA48 [17179579.676000] sata_get_dev_handle: SATA dev addr=0x1f0002, handle=0xdffdf980 [17179579.684000] ata1: dev 0 configured for UDMA/100 [17179579.684000] sata_get_dev_handle: SATA dev addr=0x1f0002, handle=0xdffdf980 [17179579.688000] scsi0 : ahci [17179579.892000] ata2: no device found (phy stat 00000000) [17179579.892000] scsi1 : ahci [17179580.096000] ata3: no device found (phy stat 00000000) [17179580.096000] scsi2 : ahci [17179580.300000] ata4: no device found (phy stat 00000000) [17179580.300000] scsi3 : ahci [17179580.300000] Vendor: ATA Model: FUJITSU MHV2100B Rev: 0084 [17179580.300000] Type: Direct-Access ANSI SCSI revision: 05 [17179580.304000] Driver 'sd' needs updating - please use bus_type methods [17179580.304000] SCSI device sda: 195371568 512-byte hdwr sectors (100030 MB) [17179580.304000] SCSI device sda: drive cache: write back [17179580.304000] SCSI device sda: 195371568 512-byte hdwr sectors (100030 MB) [17179580.304000] SCSI device sda: drive cache: write back [17179580.304000] sda: sda1 sda2 sda3 < sda5 sda6 sda7 > [17179580.420000] sd 0:0:0:0: Attached scsi disk sda [17179580.812000] usbcore: registered new driver usbfs [17179580.812000] usbcore: registered new driver hub [17179580.812000] USB Universal Host Controller Interface driver v2.3 [17179580.812000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 169 [17179580.812000] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [17179580.812000] uhci_hcd 0000:00:1d.0: UHCI Host Controller [17179580.812000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [17179580.812000] uhci_hcd 0000:00:1d.0: irq 169, io base 0x00001800 [17179580.812000] hub 1-0:1.0: USB hub found [17179580.812000] hub 1-0:1.0: 2 ports detected [17179580.856000] ieee1394: Initialized config rom entry `ip1394' [17179580.916000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 74 [17179580.916000] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [17179580.916000] uhci_hcd 0000:00:1d.1: UHCI Host Controller [17179580.916000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 [17179580.916000] uhci_hcd 0000:00:1d.1: irq 74, io base 0x00001820 [17179580.916000] hub 2-0:1.0: USB hub found [17179580.916000] hub 2-0:1.0: 2 ports detected [17179581.020000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 82 [17179581.020000] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [17179581.020000] uhci_hcd 0000:00:1d.2: UHCI Host Controller [17179581.020000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 [17179581.020000] uhci_hcd 0000:00:1d.2: irq 82, io base 0x00001840 [17179581.020000] hub 3-0:1.0: USB hub found [17179581.020000] hub 3-0:1.0: 2 ports detected [17179581.124000] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 90 [17179581.124000] PCI: Setting latency timer of device 0000:00:1d.3 to 64 [17179581.124000] uhci_hcd 0000:00:1d.3: UHCI Host Controller [17179581.124000] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 [17179581.124000] uhci_hcd 0000:00:1d.3: irq 90, io base 0x00001860 [17179581.124000] hub 4-0:1.0: USB hub found [17179581.124000] hub 4-0:1.0: 2 ports detected [17179581.156000] usb 1-1: new low speed USB device using uhci_hcd and address 2 [17179581.228000] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 19 (level, low) -> IRQ 90 [17179581.228000] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [17179581.228000] ehci_hcd 0000:00:1d.7: EHCI Host Controller [17179581.228000] ehci_hcd 0000:00:1d.7: debug port 1 [17179581.228000] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [17179581.228000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 [17179581.228000] ehci_hcd 0000:00:1d.7: irq 90, io mem 0xee404000 [17179581.232000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [17179581.232000] hub 5-0:1.0: USB hub found [17179581.232000] hub 5-0:1.0: 8 ports detected [17179581.336000] ohci1394: $Rev: 1313 $ Ben Collins [17179581.336000] PCI: Enabling device 0000:15:00.1 (0000 -> 0002) [17179581.336000] ACPI: PCI Interrupt 0000:15:00.1[B] -> GSI 17 (level, low) -> IRQ 74 [17179581.336000] PCI: Setting latency timer of device 0000:15:00.1 to 64 [17179581.384000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[74] MMIO=[e4302000-e43027ff] Max Packet=[2048] [17179581.404000] Probing IDE interface ide1... [17179581.680000] usb 1-1: device not accepting address 2, error -71 [17179581.992000] Attempting manual resume [17179582.000000] EXT3-fs: INFO: recovery required on readonly filesystem. [17179582.000000] EXT3-fs: write access will be enabled during recovery. [17179582.416000] usb 5-5: new high speed USB device using ehci_hcd and address 3 [17179582.548000] hub 5-5:1.0: USB hub found [17179582.548000] hub 5-5:1.0: 2 ports detected [17179582.608000] EXT3-fs: recovery complete. [17179582.608000] kjournald starting. Commit interval 5 seconds [17179582.608000] EXT3-fs: mounted filesystem with ordered data mode. [17179582.656000] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00061b002023f993] [17179583.076000] usb 1-1: new low speed USB device using uhci_hcd and address 4 [17179583.448000] usb 5-5.2: new high speed USB device using ehci_hcd and address 5 [17179583.780000] usb 3-2: new full speed USB device using uhci_hcd and address 2 [17179588.784000] sd 0:0:0:0: Attached scsi generic sg0 type 0 [17179589.348000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [17179589.372000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [17179589.396000] Linux agpgart interface v0.101 (c) Dave Jones [17179589.408000] agpgart: Detected an Intel 945GM Chipset. [17179589.424000] agpgart: AGP aperture is 256M @ 0x0 [17179589.476000] hw_random: RNG not detected [17179589.628000] tg3.c:v3.47 (Dec 28, 2005) [17179589.628000] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 169 [17179589.628000] PCI: Setting latency timer of device 0000:02:00.0 to 64 [17179589.632000] eth0: Tigon3 [partno(BCM95752m) rev 6002 PHY(5752)] (PCI Express) 10/100/1000BaseT Ethernet 00:16:36:79:4d:2d [17179589.632000] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[1] [17179589.632000] eth0: dma_rwctrl[76180000] [17179589.680000] ieee80211_1_1_13_crypt: registered algorithm 'NULL' [17179589.684000] ieee80211_1_1_13: 802.11 data/management/control stack, 1.1.13 [17179589.684000] ieee80211_1_1_13: Copyright (C) 2004-2005 Intel Corporation [17179589.788000] ACPI: PCI Interrupt 0000:00:1b.0[B] -> GSI 17 (level, low) -> IRQ 74 [17179589.788000] PCI: Setting latency timer of device 0000:00:1b.0 to 64 [17179589.792000] ieee80211_crypt: registered algorithm 'NULL' [17179589.792000] ieee80211: 802.11 data/management/control stack, git-1.1.7 [17179589.792000] ieee80211: Copyright (C) 2004-2005 Intel Corporation [17179589.824000] ipw3945: Intel(R) PRO/Wireless 3945 Network Connection driver for Linux, 1.0.5m [17179589.824000] ipw3945: Copyright(c) 2003-2006 Intel Corporation [17179589.844000] usbcore: registered new driver hiddev [17179589.860000] sdhci: Secure Digital Host Controller Interface driver, 0.10 [17179589.860000] sdhci: Copyright(c) Pierre Ossman [17179589.860000] input: Logitech Optical USB Mouse as /class/input/input1 [17179589.860000] input: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:1d.0-1 [17179589.860000] usbcore: registered new driver usbhid [17179589.860000] drivers/usb/input/hid-core.c: v2.6:USB HID core driver [17179589.868000] input: PC Speaker as /class/input/input2 [17179589.940000] ts: Compaq touchscreen protocol output [17179590.112000] irda_init() [17179590.112000] NET: Registered protocol family 23 [17179590.136000] nsc_ircc_pnp_probe() : From PnP, found firbase 0x2F8 ; irq 3 ; dma 3. [17179590.136000] nsc-ircc, chip->init [17179590.136000] nsc-ircc, Found chip at base=0x164e [17179590.136000] nsc-ircc, driver loaded (Dag Brattli) [17179590.136000] nsc_ircc_open(), can't get iobase of 0x2f8 [17179590.136000] nsc-ircc, Found chip at base=0x164e [17179590.136000] nsc-ircc, driver loaded (Dag Brattli) [17179590.136000] nsc_ircc_open(), can't get iobase of 0x2f8 [17179590.140000] pnp: Device 00:09 disabled. [17179590.212000] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x81a0b1, caps: 0xa04793/0x300000 [17179590.212000] serio: Synaptics pass-through port at isa0060/serio1/input0 [17179590.256000] input: SynPS/2 Synaptics TouchPad as /class/input/input3 [17179590.324000] ACPI: PCI Interrupt 0000:15:00.0[A] -> GSI 16 (level, low) -> IRQ 169 [17179590.324000] Yenta: CardBus bridge found at 0000:15:00.0 [17aa:2028] [17179590.324000] ACPI: PCI Interrupt 0000:03:00.0[A] -> <6>Yenta: Using INTVAL to route CSC interrupts to PCI [17179590.324000] Yenta: Routing CardBus interrupts to ISA [17179590.324000] GSI 17 (level, low) -> IRQ 74 [17179590.324000] Yenta TI: socket 0000:15:00.0, mfunc 0x01db1b22, devctl 0x64 [17179590.324000] PCI: Setting latency timer of device 0000:03:00.0 to 64 [17179590.324000] ipw3945: Detected Intel PRO/Wireless 3945ABG Network Connection [17179590.560000] Yenta: ISA IRQ mask 0x0cf8, PCI irq 169 [17179590.560000] Socket status: 30000086 [17179590.560000] Yenta: Raising subordinate bus# of parent bus (#15) from #18 to #19 [17179590.560000] pcmcia: parent PCI bridge I/O window: 0x9000 - 0xcfff [17179590.560000] cs: IO port probe 0x9000-0xcfff: clean. [17179590.560000] pcmcia: parent PCI bridge Memory window: 0xe4300000 - 0xe7ffffff [17179590.560000] pcmcia: parent PCI bridge Memory window: 0xe0000000 - 0xe3ffffff [17179590.580000] ACPI: PCI Interrupt 0000:15:00.3[A] -> GSI 16 (level, low) -> IRQ 169 [17179590.580000] PCI: Setting latency timer of device 0000:15:00.3 to 64 [17179590.632000] sdhci: ============== REGISTER DUMP ============== [17179590.632000] sdhci: Sys addr: 0x00000000 | Version: 0x00008900 [17179590.632000] sdhci: Blk size: 0x00000000 | Blk cnt: 0x00000000 [17179590.632000] sdhci: Argument: 0x00000000 | Trn mode: 0x00000000 [17179590.632000] sdhci: Present: 0x000a0000 | Host ctl: 0x00000000 [17179590.632000] sdhci: Power: 0x00000000 | Blk gap: 0x00000000 [17179590.632000] sdhci: Walk up: 0x00000000 | Clock: 0x00000000 [17179590.632000] sdhci: Timeout: 0x0000000e | Int stat: 0x00000000 [17179590.632000] sdhci: Int enab: 0x11ff00cf | Sig enab: 0x11ff00cf [17179590.632000] sdhci: AC12 err: 0x00000000 | Slot int: 0x00000000 [17179590.632000] sdhci: Caps: 0x01e030b0 | Max curr: 0x0000007d [17179590.632000] sdhci: =========================================== [17179590.684000] mmc0: SDHCI at 0xe4302800 irq 169 DMA [17179591.064000] cs: IO port probe 0x100-0x3af: clean. [17179591.064000] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7 [17179591.068000] cs: IO port probe 0x820-0x8ff: clean. [17179591.068000] cs: IO port probe 0xc00-0xcf7: clean. [17179591.068000] cs: IO port probe 0xa00-0xaff: clean. [17179591.212000] hda_intel: azx_get_response timeout, switching to single_cmd mode... [17179591.500000] ipw3945: Detected geography ABG (13 802.11bg channels, 23 802.11a channels) [17179591.640000] NET: Registered protocol family 17 [17179592.160000] tg3: eth0: Link is up at 100 Mbps, full duplex. [17179592.160000] tg3: eth0: Flow control is on for TX and on for RX. [17179594.120000] **** SET: Misaligned resource pointer: f71f3242 Type 00 Len 42 [17179594.120000] **** SET: Misaligned resource pointer: f71f32c6 Type 07 Len 0 [17179594.120000] pnp: Device 00:09 activated. [17179594.120000] nsc_ircc_pnp_probe() : From PnP, found firbase 0x2F8 ; irq 3 ; dma 3. [17179594.120000] nsc-ircc, chip->init [17179594.120000] nsc-ircc, Found chip at base=0x164e [17179594.120000] nsc-ircc, driver loaded (Dag Brattli) [17179594.120000] nsc_ircc_open(), can't get iobase of 0x2f8 [17179594.120000] nsc-ircc, Found chip at base=0x164e [17179594.120000] nsc-ircc, driver loaded (Dag Brattli) [17179594.120000] nsc_ircc_open(), can't get iobase of 0x2f8 [17179594.120000] pnp: Device 00:09 disabled. [17179594.180000] sbp2: $Rev: 1306 $ Ben Collins [17179594.180000] ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1) [17179594.180000] ieee1394: sbp2: Try serialize_io=0 for better performance [17179594.352000] loop: loaded (max 8 devices) [17179594.388000] Adding 2096440k swap on /dev/sda6. Priority:-1 extents:1 across:2096440k [17179594.416000] EXT3 FS on sda5, internal journal [17179594.592000] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel at redhat.com [17179594.860000] cdrom: open failed. [17179595.964000] IBM TrackPoint firmware: 0x0e, buttons: 3/3 [17179596.248000] input: TPPS/2 IBM TrackPoint as /class/input/input4 [17179598.384000] NET: Registered protocol family 10 [17179598.384000] lo: Disabled Privacy Extensions [17179598.384000] IPv6 over IPv4 tunneling driver [17179604.284000] kjournald starting. Commit interval 5 seconds [17179604.284000] EXT3 FS on sda7, internal journal [17179604.284000] EXT3-fs: mounted filesystem with ordered data mode. [17179604.328000] NTFS driver 2.1.25 [Flags: R/O MODULE]. [17179604.412000] NTFS volume version 3.1. [17179604.680000] ttyS1: LSR safety check engaged! [17179604.684000] ttyS1: LSR safety check engaged! [17179605.296000] ACPI: AC Adapter [AC] (on-line) [17179605.304000] ACPI: Battery Slot [BAT0] (battery present) [17179605.384000] ACPI: Power Button (FF) [PWRF] [17179605.384000] ACPI: Lid Switch [LID] [17179605.384000] ACPI: Sleep Button (CM) [SLPB] [17179605.460000] ibm_acpi: IBM ThinkPad ACPI Extras v0.12a [17179605.460000] ibm_acpi: http://ibm-acpi.sf.net/ [17179605.464000] ibm_acpi: dock device not present [17179605.480000] pcc_acpi: loading... [17179605.580000] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) [17179605.580000] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) [17179606.008000] lp: driver loaded but no devices found [17179606.044000] ppdev: user-space parallel port driver [17179606.272000] apm: BIOS not found. [17179607.352000] ttyS1: LSR safety check engaged! [17179608.040000] Non-volatile memory driver v1.2 [17179608.060000] input: /usr/sbin/thinkpad-keys as /class/input/input5 [17179608.380000] Bluetooth: Core ver 2.8 [17179608.380000] NET: Registered protocol family 31 [17179608.380000] Bluetooth: HCI device and connection manager initialized [17179608.380000] Bluetooth: HCI socket layer initialized [17179608.404000] Bluetooth: L2CAP ver 2.8 [17179608.404000] Bluetooth: L2CAP socket layer initialized [17179608.408000] Bluetooth: RFCOMM socket layer initialized [17179608.408000] Bluetooth: RFCOMM TTY layer initialized [17179608.408000] Bluetooth: RFCOMM ver 1.7 [17179609.016000] eth0: no IPv6 routers present [17179610.964000] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel. [17179610.968000] [fglrx] Maximum main memory to use for locked dma buffers: 1897 MBytes. [17179610.968000] [fglrx] module loaded - fglrx 8.28.8 [Aug 17 2006] on minor 0 [17179610.992000] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 169 [17179612.660000] [fglrx] total GART = 134217728 [17179612.660000] [fglrx] free GART = 118226944 [17179612.660000] [fglrx] max single GART = 118226944 [17179612.660000] [fglrx] total LFB = 124686336 [17179612.660000] [fglrx] free LFB = 110088192 [17179612.660000] [fglrx] max single LFB = 110088192 [17179612.660000] [fglrx] total Inv = 0 [17179612.660000] [fglrx] free Inv = 0 [17179612.664000] [fglrx] max single Inv = 0 [17179612.664000] [fglrx] total TIM = 0 -- Kernel panic when changing cpufreq governor https://launchpad.net/bugs/61449 From matthewpoer at gmail.com Wed Sep 20 14:51:52 2006 From: matthewpoer at gmail.com (Matthew Poer) Date: Wed, 20 Sep 2006 14:51:52 -0000 Subject: [Bug 55444] Re: Freeze live CD in dell dimension 2400 References: <20060806222055.9163.97656.malonedeb@gangotri.ubuntu.com> Message-ID: <20060920145152.17606.63153.malone@gandwana.ubuntu.com> I can verify that the system hangs terribly in this situation. I do not know the cause, nor did I attempt to change to a differant tty. I can tell you, however, that Kubuntu does not have this problem in the least. I am operaing a Dell Dimension 2400 right now running Kubuntu Live, and everything is running excitingly smoothly. I have a full resolution and will be clicking the 'Install' icon in a few minutes. -- Freeze live CD in dell dimension 2400 https://launchpad.net/bugs/55444 From oyvinst at ifi.uio.no Wed Sep 20 15:57:31 2006 From: oyvinst at ifi.uio.no (=?utf-8?q?=C3=98yvind_Stegard?=) Date: Wed, 20 Sep 2006 15:57:31 -0000 Subject: [Bug 61449] Re: Kernel panic when changing cpufreq governor References: <20060920143703.17606.17980.malonedeb@gandwana.ubuntu.com> Message-ID: <20060920155731.17606.90497.malone@gandwana.ubuntu.com> I've switched to userspace governor+powernowd to "work around" the problem. Please let me know if more information is needed, I'll by happy to test other combinations and reproduce the error, etc. -- Kernel panic when changing cpufreq governor https://launchpad.net/bugs/61449 From sascha-ubuntu-launchpad at silbe.org Wed Sep 20 16:21:04 2006 From: sascha-ubuntu-launchpad at silbe.org (Sascha Silbe) Date: Wed, 20 Sep 2006 16:21:04 -0000 Subject: [Bug 31126] Re: Doesn't check for failure due to full filesystem References: <20060211062813.25235.10693.malonedeb@gangotri.ubuntu.com> Message-ID: <20060920162104.23105.9353.malone@gangotri.ubuntu.com> Just happened for me again, too: [...] Setting up linux-image-2.6.15-27-386 (2.6.15-27.48) ... gzip: stdout: No space left on device Searching for GRUB installation directory ... found: /boot/grub [...] root at caravan:~# gzip -t /boot/initrd.img-2.6.15-27-386 gzip: /boot/initrd.img-2.6.15-27-386: unexpected end of file So now the default grub entry points to an unbootable kernel. :( If it's hard to fix initramfs-tools, please at least use "gzip -t" to check if the initrd has been successfully created. -- Doesn't check for failure due to full filesystem https://launchpad.net/bugs/31126 From milo_casagrande at yahoo.it Wed Sep 20 16:40:43 2006 From: milo_casagrande at yahoo.it (MiloCasagrande) Date: Wed, 20 Sep 2006 16:40:43 -0000 Subject: [Bug 24153] Re: ACPI on ASUS L4500R doesn't work, the CPU frequency scaling works, battery and backlight switch don't References: <20060113142735.21012.49495.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060920164043.23036.33608.malone@gangotri.ubuntu.com> Hello! I've update to the latest kernel in Edgy (2.6.17-8) and everything now is working. I've not tested Suspend and Hibernate yet... I'll do it! Thanks! -- ACPI on ASUS L4500R doesn't work, the CPU frequency scaling works, battery and backlight switch don't https://launchpad.net/bugs/24153 From mjg59 at codon.org.uk Wed Sep 20 16:53:08 2006 From: mjg59 at codon.org.uk (Matthew Garrett) Date: Wed, 20 Sep 2006 16:53:08 -0000 Subject: [Bug 24153] Re: ACPI on ASUS L4500R doesn't work, the CPU frequency scaling works, battery and backlight switch don't References: <20060113142735.21012.49495.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060920165308.23036.81415.launchpad@gangotri.ubuntu.com> ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Confirmed => Fix Released -- ACPI on ASUS L4500R doesn't work, the CPU frequency scaling works, battery and backlight switch don't https://launchpad.net/bugs/24153 From antonioricardo.correia at gmail.com Wed Sep 20 18:16:24 2006 From: antonioricardo.correia at gmail.com (Antonio Ricardo Soares da Silva Correia) Date: Wed, 20 Sep 2006 18:16:24 -0000 Subject: [Bug 24533] Re: Fail to boot smp kernel References: <20060113142932.21012.10689.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060920181624.23105.78915.malone@gangotri.ubuntu.com> Hi Richard, I did the tests you asked and here are the results: correia at kubox:~$ lspci 0000:01:00.0 VGA compatible controller: ATI Technologies Inc Radeon RV100 QY [Radeon 7000/VE] I did the modifications you suggested and the 686 kernel runs ok in console mode (it already did before without modifying anything). Starting X it went ok through the login screen to my normal kdm session, gkrellm displayed 2 processors confirming my suspiction that under the label 686 kernel it´s the SMP one that´s being installed and then the system froze as usual... I can confirm that the system also freezes with GDM (I have both installed and can choose at login time what kind of session I want, Gnome or KDE). I wish they would put back the 686 kernel without SMP extensions until they solve the problem because at least I would be able to run a 686 kernel as I did before with Breezy. In what regards the other distros I´m pretty sure both Debian and Mandrake (or Mandriva) are using Xorg, I´m not sure about Knopix. -- Fail to boot smp kernel https://launchpad.net/bugs/24533 From ivoks at grad.hr Wed Sep 20 18:22:46 2006 From: ivoks at grad.hr (=?utf-8?q?Ante_Karamati=C4=87?=) Date: Wed, 20 Sep 2006 18:22:46 -0000 Subject: [Bug 6627] Re: lexmark z53 blank pages References: <20060110202826.5372.9972.malonedeb@gangotri.ubuntu.com> Message-ID: <20060920182246.23105.39557.malone@gangotri.ubuntu.com> Maybe we should backport 5.0 to dapper? After all, it was a regression from Breezy :(. -- lexmark z53 blank pages https://launchpad.net/bugs/6627 From ivoks at grad.hr Wed Sep 20 18:26:48 2006 From: ivoks at grad.hr (=?utf-8?q?Ante_Karamati=C4=87?=) Date: Wed, 20 Sep 2006 18:26:48 -0000 Subject: [Bug 57502] Re: JMicron PATA/SATA Controller does not work References: <20060823192235.13463.13121.malonedeb@gandwana.ubuntu.com> Message-ID: <20060920182648.17562.73818.malone@gandwana.ubuntu.com> One note: all this boards are shipped with Realtek gigabit ethernet card, which is supported by r1000 module. It would be great if that module would be implemented in installer's /lib/modules/`uname -r`/kernel/drivers/net. -- JMicron PATA/SATA Controller does not work https://launchpad.net/bugs/57502 From ayolinux at gmail.com Wed Sep 20 20:34:37 2006 From: ayolinux at gmail.com (ayoli) Date: Wed, 20 Sep 2006 20:34:37 -0000 Subject: [Bug 59983] Re: ndiswrapper in edgy broken References: <20060911235728.16647.6163.malonedeb@gangotri.ubuntu.com> Message-ID: <20060920203437.17606.55091.malone@gandwana.ubuntu.com> add the issue too, and the "possible solution" works too. so have linked /usr/sbin/ndiwswrapper-1.8 to /usr/sbin/ndiwswrapper. btw if ndiwswrapper-1.1 doesn't work and there is a newer version, why we keep the old as default install ? -- ndiswrapper in edgy broken https://launchpad.net/bugs/59983 From nilusk at gmail.com Wed Sep 20 20:32:18 2006 From: nilusk at gmail.com (nilux) Date: Wed, 20 Sep 2006 20:32:18 -0000 Subject: [Bug 46806] Re: Atheros based WLAN card stops responding References: <20060526181456.23022.77794.malonedeb@gangotri.ubuntu.com> Message-ID: <20060920203218.23105.10626.malone@gangotri.ubuntu.com> I have the same card and quite the same problem! Actually, my DWL-G520 works when it wants on Dapper 32 bits : - sometimes it's connected to my network at startup and it works well - sometimes i have to active my 'ath0' interface through network-admin and in this case, sometimes it just works, sometimes it takes time and then it works slowly or not at all - when it works [slowly or not at all], using an msn application [gaim, amsn, and even the webmessenger applet] 'weakens' my connection [webpages are marked as 'loading' but they don't] On dapper 64, edgy 32 and edgy 64, it just doesn't work! No 'ath0' interface is detected! That's all I can say for now, if you need some more info, let me know! -- Atheros based WLAN card stops responding https://launchpad.net/bugs/46806 From ubuntu-launchpad at theplayboymansion.net Wed Sep 20 20:47:59 2006 From: ubuntu-launchpad at theplayboymansion.net (ph8) Date: Wed, 20 Sep 2006 20:47:59 -0000 Subject: [Bug 57502] Re: JMicron PATA/SATA Controller does not work References: <20060823192235.13463.13121.malonedeb@gandwana.ubuntu.com> Message-ID: <20060920204759.23036.66878.malone@gangotri.ubuntu.com> According to the changelists the fix IS included in the daily build of the 20th.. unfortunately it doesn't appear to work (confirmed with three other people) If anyone has success with this please post here - otherwise it looks like it's back to the drawing board Chuck! :s -- JMicron PATA/SATA Controller does not work https://launchpad.net/bugs/57502 From ben.collins at ubuntu.com Wed Sep 20 20:52:33 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Wed, 20 Sep 2006 20:52:33 -0000 Subject: [Bug 24533] Re: Fail to boot smp kernel References: <20060113142932.21012.10689.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060920205233.17606.78237.malone@gandwana.ubuntu.com> If you just want to run a non-SMP kernel, "sudo apt-get install linux-386" will do the trick for you. -- Fail to boot smp kernel https://launchpad.net/bugs/24533 From marcin.antczak at gmail.com Wed Sep 20 21:26:20 2006 From: marcin.antczak at gmail.com (Marcin Antczak) Date: Wed, 20 Sep 2006 21:26:20 -0000 Subject: [Bug 57502] Re: JMicron PATA/SATA Controller does not work References: <20060823192235.13463.13121.malonedeb@gandwana.ubuntu.com> Message-ID: <20060920212620.17562.96136.malone@gandwana.ubuntu.com> What can I say? I bought machine with Core 2 Duo at monday and until then I have to use windows... because - yes you are right - I can confirm that daily build from 20.09.2006 still doesn't work with Asus p5b deluxe. Please, fix it. I really want to switch back to linux as quick as possible. -- JMicron PATA/SATA Controller does not work https://launchpad.net/bugs/57502 From igor4u at gmail.com Wed Sep 20 21:38:48 2006 From: igor4u at gmail.com (Igor Zubarev) Date: Wed, 20 Sep 2006 21:38:48 -0000 Subject: [Bug 29720] Gnome hangs DVD reading DVD+RW disc References: <20060126060810.9306.91029.malonedeb@gandwana.ubuntu.com> Message-ID: <20060920213848.17606.1215.launchpad@canonical@gandwana.ubuntu.com> Public bug reported: Gnome doesn't understand recorded DVD+RW disc. It sees it as DVD-RW on desktop. ------------ Ubuntu 5.10. Notebook Sony VAIO VGN-FS115MR ** Affects: gnome-media (upstream) Importance: Unknown Status: Unknown ** Affects: linux-source-2.6.15 (Ubuntu) Importance: Medium Assignee: Ubuntu Desktop Bugs Status: Unconfirmed -- Gnome hangs DVD reading DVD+RW disc https://launchpad.net/bugs/29720 From seb128 at ubuntu.com Wed Sep 20 21:38:47 2006 From: seb128 at ubuntu.com (Sebastien Bacher) Date: Wed, 20 Sep 2006 21:38:47 -0000 Subject: [Bug 29720] Re: Gnome hangs DVD reading DVD+RW disc References: <20060126060810.9306.91029.malonedeb@gandwana.ubuntu.com> Message-ID: <20060920213848.17606.16690.malone@gandwana.ubuntu.com> reassigning to linux, either a linux or hardware issue ** Changed in: gnome-media (Ubuntu) Sourcepackagename: gnome-media => linux-source-2.6.15 Status: Needs Info => Unconfirmed -- Gnome hangs DVD reading DVD+RW disc https://launchpad.net/bugs/29720 From jennings at avalanchefan.com Wed Sep 20 18:57:56 2006 From: jennings at avalanchefan.com (jdjennings) Date: Wed, 20 Sep 2006 18:57:56 -0000 Subject: [Bug 43961] Re: Power down after shutdown does not work... References: <20060510072310.21520.62027.malonedeb@gandwana.ubuntu.com> Message-ID: <20060920185757.17562.99588.malone@gandwana.ubuntu.com> My machine is an old Compaq Deskpro with a Pentium II 333MHz (ouch!). I have this same problem running Ubuntu 6.06.1, and also with Debian Etch. I loaded up a Knoppix 5.01 CD, and it has the same problem. Now it gets strange. I had FreeBSD 6.1 loaded on the machine, and it had the same problem, it wouldn't power off after a shutdown (none of these will do a shutdown/restart either). I also have Solaris 11 b46 on this machine (I'm a masochist) and it powers down and restarts just fine. I've tried all the apm/acpi settings mentioned above, and none had any effect. I'm going to try downgrading to Ubuntu 6.06 (or even 5.10) and verify that it worked then. I tried loading Edgy knot-3, but it hangs at 59% through the installation (3 times consistently). Debian Etch and FreeBSD 6.1 work fine on my Dell Optiplex and a white box P4 machine. -- Power down after shutdown does not work... https://launchpad.net/bugs/43961 From andrewpmk at gmail.com Wed Sep 20 21:51:40 2006 From: andrewpmk at gmail.com (andrewpmk) Date: Wed, 20 Sep 2006 21:51:40 -0000 Subject: [Bug 57502] Re: JMicron PATA/SATA Controller does not work References: <20060823192235.13463.13121.malonedeb@gandwana.ubuntu.com> Message-ID: <20060920215140.23105.68838.malone@gangotri.ubuntu.com> Too bad, it doesn't work for me either. I just wasted a blank CD :( -- JMicron PATA/SATA Controller does not work https://launchpad.net/bugs/57502 From ok1dtm at quick.cz Wed Sep 20 22:04:58 2006 From: ok1dtm at quick.cz (josef) Date: Wed, 20 Sep 2006 22:04:58 -0000 Subject: [Bug 57502] Re: JMicron PATA/SATA Controller does not work References: <20060823192235.13463.13121.malonedeb@gandwana.ubuntu.com> Message-ID: <20060920220458.17606.50327.malone@gandwana.ubuntu.com> GA P965 DS4 confirm also cd with daily build from 20.9 no work with pata devices -- JMicron PATA/SATA Controller does not work https://launchpad.net/bugs/57502 From ben.collins at ubuntu.com Wed Sep 20 22:27:48 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Wed, 20 Sep 2006 22:27:48 -0000 Subject: [Bug 57502] Re: [Bug 57502] Re: JMicron PATA/SATA Controller does not work References: <20060823192235.13463.13121.malonedeb@gandwana.ubuntu.com> <20060920220458.17606.50327.malone@gandwana.ubuntu.com> Message-ID: <1158791269.4594.328.camel@grayson.internal.net> Pretty much what this tells me is that the patch that I was provided just doesn't fix the problem. For those of you that can, please provide this information (from livecd boot). lspci -vv lspci -vvn dmesg I'll work on getting this resolved as quickly as possible. The sooner I can get this info, the sooner I can come up with a patch, and the sooner I can create some daily images to test. Probably easiest way for folks to test the daily kernels is to install on the disk from another computer, update the kernel, and then boot this disk in the machine with the JMicron controller. Thanks -- JMicron PATA/SATA Controller does not work https://launchpad.net/bugs/57502 From thunder.m at czela.net Wed Sep 20 22:44:02 2006 From: thunder.m at czela.net (Thunder.m) Date: Wed, 20 Sep 2006 22:44:02 -0000 Subject: [Bug 57502] Re: JMicron PATA/SATA Controller does not work References: <20060823192235.13463.13121.malonedeb@gandwana.ubuntu.com> Message-ID: <20060920224402.23036.23550.malone@gangotri.ubuntu.com> Hi I am using debian sid with vanilla kernel 2.6.18, evrything works. lspci -vv: 00:00.0 Host bridge: Intel Corporation P965/G965 Memory Controller Hub (rev 02) Subsystem: Giga-byte Technology Unknown device 5000 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- TAbort- SERR- TAbort- Reset- FastB2B- Capabilities: [88] Subsystem: Giga-byte Technology Unknown device 5000 Capabilities: [80] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [90] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable- Address: 00000000 Data: 0000 Capabilities: [a0] Express Root Port (Slot+) IRQ 0 Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag- Device: Latency L0s <64ns, L1 <1us Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported- Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- Device: MaxPayload 128 bytes, MaxReadReq 128 bytes Link: Supported Speed 2.5Gb/s, Width x16, ASPM L0s, Port 2 Link: Latency L0s <256ns, L1 <4us Link: ASPM Disabled RCB 64 bytes CommClk+ ExtSynch- Link: Speed 2.5Gb/s, Width x16 Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug- Surpise- Slot: Number 32, PowerLimit 75.000000 Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- Slot: AttnInd Off, PwrInd On, Power- Root: Correctable- Non-Fatal- Fatal- PME- Capabilities: [100] Virtual Channel Capabilities: [140] Unknown (5) 00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI #4 (rev 02) (prog-if 00 [UHCI]) Subsystem: Giga-byte Technology Unknown device 5004 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- Reset- FastB2B- Capabilities: [40] Express Root Port (Slot+) IRQ 0 Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag- Device: Latency L0s unlimited, L1 unlimited Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported- Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- Device: MaxPayload 128 bytes, MaxReadReq 128 bytes Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 1 Link: Latency L0s <1us, L1 <4us Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch- Link: Speed 2.5Gb/s, Width x0 Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug+ Surpise+ Slot: Number 16, PowerLimit 10.000000 Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- Slot: AttnInd Unknown, PwrInd Unknown, Power- Root: Correctable- Non-Fatal- Fatal- PME- Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable- Address: 00000000 Data: 0000 Capabilities: [90] Subsystem: Gammagraphx, Inc. Unknown device 0000 Capabilities: [a0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [100] Virtual Channel Capabilities: [180] Unknown (5) 00:1c.3 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 4 (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- TAbort- Reset- FastB2B- Capabilities: [40] Express Root Port (Slot+) IRQ 0 Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag- Device: Latency L0s unlimited, L1 unlimited Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported- Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- Device: MaxPayload 128 bytes, MaxReadReq 128 bytes Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 4 Link: Latency L0s <256ns, L1 <4us Link: ASPM Disabled RCB 64 bytes CommClk+ ExtSynch- Link: Speed 2.5Gb/s, Width x1 Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug+ Surpise+ Slot: Number 19, PowerLimit 10.000000 Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- Slot: AttnInd Unknown, PwrInd Unknown, Power- Root: Correctable- Non-Fatal- Fatal- PME- Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable- Address: 00000000 Data: 0000 Capabilities: [90] Subsystem: Gammagraphx, Inc. Unknown device 0000 Capabilities: [a0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [100] Virtual Channel Capabilities: [180] Unknown (5) 00:1c.4 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 5 (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- TAbort- Reset- FastB2B- Capabilities: [40] Express Root Port (Slot+) IRQ 0 Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag- Device: Latency L0s unlimited, L1 unlimited Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported- Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- Device: MaxPayload 128 bytes, MaxReadReq 128 bytes Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 5 Link: Latency L0s <256ns, L1 <4us Link: ASPM Disabled RCB 64 bytes CommClk+ ExtSynch- Link: Speed 2.5Gb/s, Width x1 Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug+ Surpise+ Slot: Number 20, PowerLimit 10.000000 Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- Slot: AttnInd Unknown, PwrInd Unknown, Power- Root: Correctable- Non-Fatal- Fatal- PME- Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable- Address: 00000000 Data: 0000 Capabilities: [90] Subsystem: Gammagraphx, Inc. Unknown device 0000 Capabilities: [a0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [100] Virtual Channel Capabilities: [180] Unknown (5) 00:1d.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI #1 (rev 02) (prog-if 00 [UHCI]) Subsystem: Giga-byte Technology Unknown device 5004 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- Reset- FastB2B- Capabilities: [50] Subsystem: Gammagraphx, Inc. Unknown device 0000 00:1f.0 ISA bridge: Intel Corporation 82801HB/HR (ICH8/R) LPC Interface Controller (rev 02) Subsystem: Giga-byte Technology Unknown device 5001 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- Reset- FastB2B- Capabilities: [88] Subsystem: 1458:5000 Capabilities: [80] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [90] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable- Address: 00000000 Data: 0000 Capabilities: [a0] Express Root Port (Slot+) IRQ 0 Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag- Device: Latency L0s <64ns, L1 <1us Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported- Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- Device: MaxPayload 128 bytes, MaxReadReq 128 bytes Link: Supported Speed 2.5Gb/s, Width x16, ASPM L0s, Port 2 Link: Latency L0s <256ns, L1 <4us Link: ASPM Disabled RCB 64 bytes CommClk+ ExtSynch- Link: Speed 2.5Gb/s, Width x16 Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug- Surpise- Slot: Number 32, PowerLimit 75.000000 Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- Slot: AttnInd Off, PwrInd On, Power- Root: Correctable- Non-Fatal- Fatal- PME- Capabilities: [100] Virtual Channel Capabilities: [140] Unknown (5) 00:1a.0 0c03: 8086:2834 (rev 02) (prog-if 00 [UHCI]) Subsystem: 1458:5004 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- Reset- FastB2B- Capabilities: [40] Express Root Port (Slot+) IRQ 0 Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag- Device: Latency L0s unlimited, L1 unlimited Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported- Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- Device: MaxPayload 128 bytes, MaxReadReq 128 bytes Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 1 Link: Latency L0s <1us, L1 <4us Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch- Link: Speed 2.5Gb/s, Width x0 Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug+ Surpise+ Slot: Number 16, PowerLimit 10.000000 Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- Slot: AttnInd Unknown, PwrInd Unknown, Power- Root: Correctable- Non-Fatal- Fatal- PME- Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable- Address: 00000000 Data: 0000 Capabilities: [90] Subsystem: 0000:0000 Capabilities: [a0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [100] Virtual Channel Capabilities: [180] Unknown (5) 00:1c.3 0604: 8086:2845 (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- TAbort- Reset- FastB2B- Capabilities: [40] Express Root Port (Slot+) IRQ 0 Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag- Device: Latency L0s unlimited, L1 unlimited Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported- Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- Device: MaxPayload 128 bytes, MaxReadReq 128 bytes Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 4 Link: Latency L0s <256ns, L1 <4us Link: ASPM Disabled RCB 64 bytes CommClk+ ExtSynch- Link: Speed 2.5Gb/s, Width x1 Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug+ Surpise+ Slot: Number 19, PowerLimit 10.000000 Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- Slot: AttnInd Unknown, PwrInd Unknown, Power- Root: Correctable- Non-Fatal- Fatal- PME- Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable- Address: 00000000 Data: 0000 Capabilities: [90] Subsystem: 0000:0000 Capabilities: [a0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [100] Virtual Channel Capabilities: [180] Unknown (5) 00:1c.4 0604: 8086:2847 (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- TAbort- Reset- FastB2B- Capabilities: [40] Express Root Port (Slot+) IRQ 0 Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag- Device: Latency L0s unlimited, L1 unlimited Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported- Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- Device: MaxPayload 128 bytes, MaxReadReq 128 bytes Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 5 Link: Latency L0s <256ns, L1 <4us Link: ASPM Disabled RCB 64 bytes CommClk+ ExtSynch- Link: Speed 2.5Gb/s, Width x1 Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug+ Surpise+ Slot: Number 20, PowerLimit 10.000000 Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- Slot: AttnInd Unknown, PwrInd Unknown, Power- Root: Correctable- Non-Fatal- Fatal- PME- Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable- Address: 00000000 Data: 0000 Capabilities: [90] Subsystem: 0000:0000 Capabilities: [a0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [100] Virtual Channel Capabilities: [180] Unknown (5) 00:1d.0 0c03: 8086:2830 (rev 02) (prog-if 00 [UHCI]) Subsystem: 1458:5004 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- Reset- FastB2B- Capabilities: [50] Subsystem: 0000:0000 00:1f.0 0601: 8086:2810 (rev 02) Subsystem: 1458:5001 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:01.0 to 64 ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1c.0 to 64 ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1c.3 to 64 ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1c.4 to 64 PCI: Setting latency timer of device 0000:00:1e.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1572864 bytes) TCP bind hash table entries: 65536 (order: 7, 786432 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered Machine check exception polling timer started. IA-32 Microcode Update Driver: v1.14a audit: initializing netlink socket (disabled) audit(1158789442.608:1): initialized highmem bounce pool size: 64 pages Installing knfsd (copyright (C) 1996 okir at monad.swb.de). NTFS driver 2.1.27 [Flags: R/W]. SGI XFS with ACLs, security attributes, realtime, large block numbers, no debug enabled SGI XFS Quota Management subsystem Initializing Cryptographic API io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) PCI: Setting latency timer of device 0000:00:01.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:01.0:pcie00] Allocate Port Service[0000:00:01.0:pcie03] PCI: Setting latency timer of device 0000:00:1c.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.0:pcie00] Allocate Port Service[0000:00:1c.0:pcie02] Allocate Port Service[0000:00:1c.0:pcie03] PCI: Setting latency timer of device 0000:00:1c.3 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.3:pcie00] Allocate Port Service[0000:00:1c.3:pcie02] Allocate Port Service[0000:00:1c.3:pcie03] PCI: Setting latency timer of device 0000:00:1c.4 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.4:pcie00] Allocate Port Service[0000:00:1c.4:pcie02] Allocate Port Service[0000:00:1c.4:pcie03] vesafb: framebuffer at 0xd0000000, mapped to 0xf8880000, using 3072k, total 262144k vesafb: mode is 1024x768x16, linelength=2048, pages=1 vesafb: protected mode interface info at c000:d5e0 vesafb: pmi: set display start = c00cd616, set palette = c00cd680 vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da vesafb: scrolling: redraw vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 Console: switching to colour frame buffer device 128x48 fb0: VESA VGA frame buffer device ACPI: Power Button (FF) [PWRF] ACPI: Power Button (CM) [PWRB] Using specific hotkey driver ACPI: Processor [CPU0] (supports 2 throttling states) ACPI: Processor [CPU1] (supports 2 throttling states) ACPI: Getting cpuindex for acpiid 0x2 ACPI: Getting cpuindex for acpiid 0x3 lp: driver loaded but no devices found Real Time Clock Driver v1.12ac ppdev: user-space parallel port driver parport: PnPBIOS parport detected. parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] lp0: using parport0 (interrupt-driven). RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize loop: loaded (max 8 devices) nbd: registered device at major 43 usbcore: registered new driver ub Intel(R) PRO/1000 Network Driver - version 7.1.9-k4 Copyright (c) 1999-2006 Intel Corporation. Intel(R) PRO/10GbE Network Driver - version 1.0.109-k2 Copyright (c) 1999-2006 Intel Corporation. ns83820.c: National Semiconductor DP83820 10/100/1000 driver. ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 16 (level, low) -> IRQ 16 sk98lin: Network Device Driver v8.35.2.3 (C)Copyright 1999-2006 Marvell(R). PCI: Setting latency timer of device 0000:04:00.0 to 64 eth0: Marvell Yukon 88E8056 Gigabit Ethernet Controller PrefPort:A RlmtMode:Check Link State netconsole: not configured, aborting Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx JMB363: IDE controller at PCI slot 0000:03:00.1 ACPI: PCI Interrupt 0000:03:00.1[B] -> GSI 16 (level, low) -> IRQ 16 JMB363: chipset revision 2 JMB363: 100% native mode on irq 16 ide2: BM-DMA at 0x7000-0x7007, BIOS settings: hde:pio, hdf:pio ide3: BM-DMA at 0x7008-0x700f, BIOS settings: hdg:pio, hdh:pio Probing IDE interface ide2... hde: HL-DT-ST DVDRAM GSA-H10N, ATAPI CD/DVD-ROM drive hdf: HL-DT-ST DVDRAM GSA-4081B, ATAPI CD/DVD-ROM drive ide2 at 0x6000-0x6007,0x6402 on irq 16 Probing IDE interface ide3... Probing IDE interface ide0... Probing IDE interface ide1... Probing IDE interface ide3... hde: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 hdf: ATAPI 32X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33) libata version 2.00 loaded. ahci 0000:03:00.0: version 2.0 ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 19 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:03:00.0 to 64 ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part ata1: SATA max UDMA/133 cmd 0xF8804100 ctl 0x0 bmdma 0x0 irq 17 ata2: SATA max UDMA/133 cmd 0xF8804180 ctl 0x0 bmdma 0x0 irq 17 scsi0 : ahci ata1: SATA link down (SStatus 0 SControl 300) scsi1 : ahci ata2: SATA link down (SStatus 0 SControl 300) ata_piix 0000:00:1f.2: version 2.00 ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1f.2 to 64 ata3: SATA max UDMA/133 cmd 0xB400 ctl 0xB802 bmdma 0xC400 irq 17 ata4: SATA max UDMA/133 cmd 0xBC00 ctl 0xC002 bmdma 0xC408 irq 17 scsi2 : ata_piix ata3.00: ATA-7, max UDMA/133, 625140335 sectors: LBA48 NCQ (depth 0/32) ata3.00: ata3: dev 0 multi count 16 ata3.00: configured for UDMA/133 scsi3 : ata_piix ata4.00: ATA-7, max UDMA/133, 625140335 sectors: LBA48 NCQ (depth 0/32) ata4.00: ata4: dev 0 multi count 16 ata4.00: configured for UDMA/133 Vendor: ATA Model: ST3320620AS Rev: 3.AA Type: Direct-Access ANSI SCSI revision: 05 Vendor: ATA Model: ST3320620AS Rev: 3.AA Type: Direct-Access ANSI SCSI revision: 05 ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ] ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 19 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1f.5 to 64 ata5: SATA max UDMA/133 cmd 0xD000 ctl 0xD402 bmdma 0xE000 irq 17 ata6: SATA max UDMA/133 cmd 0xD800 ctl 0xDC02 bmdma 0xE008 irq 17 scsi4 : ata_piix ATA: abnormal status 0x7F on port 0xD007 scsi5 : ata_piix ATA: abnormal status 0x7F on port 0xD807 RocketRAID 3xxx SATA Controller driver v1.0 (060426) SCSI device sda: 625140335 512-byte hdwr sectors (320072 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back SCSI device sda: 625140335 512-byte hdwr sectors (320072 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back sda: sda1 sda2 sda3 sda4 < sda5 sda6 > sd 2:0:0:0: Attached scsi disk sda SCSI device sdb: 625140335 512-byte hdwr sectors (320072 MB) sdb: Write Protect is off sdb: Mode Sense: 00 3a 00 00 SCSI device sdb: drive cache: write back SCSI device sdb: 625140335 512-byte hdwr sectors (320072 MB) sdb: Write Protect is off sdb: Mode Sense: 00 3a 00 00 SCSI device sdb: drive cache: write back sdb: sdb1 sdb2 sdb3 sd 3:0:0:0: Attached scsi disk sdb sd 2:0:0:0: Attached scsi generic sg0 type 0 sd 3:0:0:0: Attached scsi generic sg1 type 0 video1394: Installed video1394 module ieee1394: raw1394: /dev/raw1394 device initialized ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1) ieee1394: sbp2: Try serialize_io=0 for better performance ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1a.7 to 64 ehci_hcd 0000:00:1a.7: EHCI Host Controller ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 PCI: cache line size of 32 is not supported by device 0000:00:1a.7 ehci_hcd 0000:00:1a.7: irq 18, io mem 0xe9201000 ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 4 ports detected ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 PCI: cache line size of 32 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: irq 19, io mem 0xe9200000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 6 ports detected USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1a.0 to 64 uhci_hcd 0000:00:1a.0: UHCI Host Controller uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000b000 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 20 PCI: Setting latency timer of device 0000:00:1a.1 to 64 uhci_hcd 0000:00:1a.1: UHCI Host Controller uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1a.1: irq 20, io base 0x0000a000 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.0: irq 19, io base 0x0000a400 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected usb 2-5: new high speed USB device using ehci_hcd and address 2 ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000a800 usb usb6: configuration #1 chosen from 1 choice hub 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports detected usb 2-5: configuration #1 chosen from 1 choice ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ac00 usb usb7: configuration #1 chosen from 1 choice hub 7-0:1.0: USB hub found hub 7-0:1.0: 2 ports detected usb 2-6: new high speed USB device using ehci_hcd and address 3 usb 2-6: configuration #1 chosen from 1 choice hub 2-6:1.0: USB hub found hub 2-6:1.0: 2 ports detected usb 3-1: new full speed USB device using uhci_hcd and address 2 usb 3-1: configuration #1 chosen from 1 choice drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 usb 2-6.1: new high speed USB device using ehci_hcd and address 4 usb 2-6.1: configuration #1 chosen from 1 choice hub 2-6.1:1.0: USB hub found hub 2-6.1:1.0: 4 ports detected usb 2-6.2: new high speed USB device using ehci_hcd and address 5 usb 2-6.2: configuration #1 chosen from 1 choice usb 2-6.1.1: new low speed USB device using ehci_hcd and address 6 usb 2-6.1.1: configuration #1 chosen from 1 choice usb 2-6.1.2: new low speed USB device using ehci_hcd and address 7 usb 2-6.1.2: configuration #1 chosen from 1 choice usbcore: registered new driver usblp drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver Initializing USB Mass Storage driver... usbcore: registered new driver usb-storage USB Mass Storage support registered. input: Logitech USB-PS/2 Optical Mouse as /class/input/input0 input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.7-6.1.1 input: Chicony Saitek Eclipse Keyboard as /class/input/input1 input: USB HID v1.11 Keyboard [Chicony Saitek Eclipse Keyboard] on usb-0000:00:1d.7-6.1.2 input: Chicony Saitek Eclipse Keyboard as /class/input/input2 input: USB HID v1.11 Device [Chicony Saitek Eclipse Keyboard] on usb-0000:00:1d.7-6.1.2 usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver PNP: No PS/2 controller found. Probing ports directly. serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice Advanced Linux Sound Architecture Driver Version 1.0.12rc1 (Thu Jun 22 13:55:50 2006 UTC). ALSA device list: No soundcards found. oprofile: using NMI interrupt. IPv4 over IPv4 tunneling driver GRE over IPv4 tunneling driver ip_conntrack version 2.4 (8191 buckets, 65528 max) - 192 bytes per conntrack TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 17 Bridge firewalling registered Starting balanced_irq Using IPI Shortcut mode RAMDISK: Couldn't find valid RAM disk image starting at 0. Time: tsc clocksource has been installed. EXT3-fs: INFO: recovery required on readonly filesystem. EXT3-fs: write access will be enabled during recovery. kjournald starting. Commit interval 5 seconds EXT3-fs: sda1: orphan cleanup on readonly fs ext3_orphan_cleanup: deleting unreferenced inode 1157127 EXT3-fs: sda1: 1 orphan inode deleted EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 220k freed Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 input: PC Speaker as /class/input/input3 Bluetooth: HCI USB driver ver 2.9 usbcore: registered new driver hci_usb ACPI: PCI Interrupt 0000:05:02.0[A] -> GSI 18 (level, low) -> IRQ 18 Linux video capture interface: v2.00 ACPI: PCI Interrupt 0000:00:1f.3[C] -> GSI 18 (level, low) -> IRQ 18 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A bttv: driver version 0.9.16 loaded bttv: using 8 buffers with 2080k (520 pages) each for capture bttv: Bt8xx card found (0). ACPI: PCI Interrupt 0000:05:01.0[A] -> GSI 19 (level, low) -> IRQ 17 bttv0: Bt878 (rev 17) at 0000:05:01.0, irq: 17, latency: 32, mmio: 0xe9100000 bttv0: using: ProVideo PV951 [card=42,insmod option] bttv0: gpio: en=00000000, out=00000000 in=00ffffff [init] bttv0: using tuner=23 bttv0: i2c: checking for TDA9875 @ 0xb0... not found bttv0: i2c: checking for TDA7432 @ 0x8a... not found tvaudio 1-004b: pic16c54 (PV951) found @ 0x96 (bt878 #0 [sw]) bttv0: i2c: checking for TDA9887 @ 0x86... not found tuner 1-0060: All bytes are equal. It is not a TEA5767 tuner 1-0060: chip found @ 0xc0 (bt878 #0 [sw]) tuner 1-0060: type set to 23 (Philips PAL_DK (FI1256 and compatibles)) bttv0: registered device video0 bttv0: registered device vbi0 bttv0: registered device radio0 bttv0: PLL: 28636363 => 35468950 .. ok bt878: AUDIO driver version 0.0.0 loaded bt878: Bt878 AUDIO function found (0). ACPI: PCI Interrupt 0000:05:01.1[A] -> GSI 19 (level, low) -> IRQ 17 bt878_probe: card id=[0x0],[ ] has DVB functions. bt878(0): Bt878 (rev 17) at 05:01.1, irq: 17, latency: 32, memory: 0xe9101000 Adding 995988k swap on /dev/sda5. Priority:-1 extents:1 across:995988k EXT3-fs warning: maximal mount count reached, running e2fsck is recommended EXT3 FS on sda1, internal journal i2c /dev entries driver kjournald starting. Commit interval 5 seconds EXT3-fs warning: maximal mount count reached, running e2fsck is recommended EXT3 FS on sda2, internal journal EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3-fs warning: mounting fs with errors, running e2fsck is recommended EXT3 FS on sda3, internal journal EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3-fs warning: mounting fs with errors, running e2fsck is recommended EXT3 FS on sda6, internal journal EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with ordered data mode. NTFS volume version 3.1. kjournald starting. Commit interval 5 seconds EXT3-fs warning: maximal mount count reached, running e2fsck is recommended EXT3 FS on sdb2, internal journal EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with ordered data mode. VFS: Can't find ext3 filesystem on dev sdb3. eth0: network connection up using port A speed: 100 autonegotiation: yes duplex mode: full flowctrl: symmetric irq moderation: disabled tcp offload: disabled scatter-gather: enabled tx-checksum: enabled rx-checksum: enabled rx-polling: enabled Bluetooth: L2CAP ver 2.8 Bluetooth: L2CAP socket layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM ver 1.8 vmmon: module license 'unspecified' taints kernel. /dev/vmmon[3634]: Module vmmon: registered with major=10 minor=165 /dev/vmmon[3634]: Module vmmon: initialized /dev/vmnet: open called by PID 3662 (vmnet-bridge) /dev/vmnet: hub 0 does not exist, allocating memory. /dev/vmnet: port on hub 0 successfully opened bridge-eth0: enabling the bridge bridge-eth0: up bridge-eth0: already up bridge-eth0: attached /dev/vmnet: open called by PID 3676 (vmnet-natd) /dev/vmnet: hub 8 does not exist, allocating memory. /dev/vmnet: port on hub 8 successfully opened /dev/vmnet: open called by PID 3677 (vmnet-netifup) /dev/vmnet: port on hub 8 successfully opened /dev/vmnet: open called by PID 3678 (vmnet-netifup) /dev/vmnet: hub 1 does not exist, allocating memory. /dev/vmnet: port on hub 1 successfully opened /dev/vmnet: open called by PID 3697 (vmnet-dhcpd) /dev/vmnet: port on hub 8 successfully opened /dev/vmnet: open called by PID 3718 (vmnet-dhcpd) /dev/vmnet: port on hub 1 successfully opened Linux agpgart interface v0.101 (c) Dave Jones ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:01:00.0 to 64 NVRM: loading NVIDIA Linux x86 Kernel Module 1.0-8774 Tue Aug 1 20:54:08 PDT 2006 i2c_adapter i2c-2: SMBus Quick command not supported, can't probe for chips i2c_adapter i2c-3: SMBus Quick command not supported, can't probe for chips i2c_adapter i2c-4: SMBus Quick command not supported, can't probe for chips hde: cdrom_pc_intr: The drive appears confused (ireason = 0x01). Trying to recover by ending request. hdf: cdrom_pc_intr: The drive appears confused (ireason = 0x01). Trying to recover by ending request. hdf: cdrom_pc_intr: The drive appears confused (ireason = 0x01). Trying to recover by ending request. hde: cdrom_pc_intr: The drive appears confused (ireason = 0x01). Trying to recover by ending request. hde: cdrom_pc_intr: The drive appears confused (ireason = 0x01). Trying to recover by ending request. hde: cdrom_pc_intr: The drive appears confused (ireason = 0x01). Trying to recover by ending request. hdf: cdrom_pc_intr: The drive appears confused (ireason = 0x01). Trying to recover by ending request. hdf: cdrom_pc_intr: The drive appears confused (ireason = 0x01). Trying to recover by ending request. can't create port hde: cdrom_pc_intr: The drive appears confused (ireason = 0x01). Trying to recover by ending request. can't create port hdf: cdrom_pc_intr: The drive appears confused (ireason = 0x01). Trying to recover by ending request. can't create port hde: cdrom_pc_intr: The drive appears confused (ireason = 0x01). Trying to recover by ending request. hde: cdrom_pc_intr: The drive appears confused (ireason = 0x01). Trying to recover by ending request. hdf: cdrom_pc_intr: The drive appears confused (ireason = 0x01). Trying to recover by ending request. hdf: status error: status=0x58 { DriveReady SeekComplete DataRequest } ide: failed opcode was: unknown hdf: drive not ready for command hde: cdrom_pc_intr: The drive appears confused (ireason = 0x01). Trying to recover by ending request. hdf: cdrom_pc_intr: The drive appears confused (ireason = 0x01). Trying to recover by ending request. hdf: cdrom_pc_intr: The drive appears confused (ireason = 0x01). Trying to recover by ending request. -- JMicron PATA/SATA Controller does not work https://launchpad.net/bugs/57502 From rtg at aapsc.com Wed Sep 20 23:13:50 2006 From: rtg at aapsc.com (Richard Green) Date: Wed, 20 Sep 2006 23:13:50 -0000 Subject: [Bug 24533] Re: [Bug 24533] Re: Fail to boot smp kernel References: <20060113142932.21012.10689.launchpad@macquarie.warthogs.hbd.com> <20060920205233.17606.78237.malone@gandwana.ubuntu.com> Message-ID: That's not the issue. the 386 kernel is the default, and is what I've been running. The desire for a 686 non-SMP kernel is to determine if the problem is with the 686 optimizations or the SMP code. WHat I really want is for someone with knowledge of the kernel internals to look at Paul's patches and see if they're appropriate to apply to the current 686smp kernel source. I'm not a C programmer, and I haven't even configured and compiled a kernel since it went modular, so I don't trust my own opinion on the subject... -- Rick Green "Those who would give up essential Liberty, to purchase a little temporary Safety, deserve neither Liberty nor Safety." -Benjamin Franklin -- Fail to boot smp kernel https://launchpad.net/bugs/24533 From ben.collins at ubuntu.com Wed Sep 20 23:14:29 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Wed, 20 Sep 2006 23:14:29 -0000 Subject: [Bug 56885] Re: e1000 driver not working properly on x86_64? References: <20060819091800.12543.64715.malonedeb@gangotri.ubuntu.com> Message-ID: <20060920231429.17562.83146.malone@gandwana.ubuntu.com> This change will show up soon in dapper-proposed. I didn't remove the capability for MSI to work, but it's disabled by default now. Re-enable by doing enable_msi=1 when loading the module (for anyone that knows it works, or wants to find out). ** Changed in: linux-source-2.6.15 (Ubuntu) Assignee: (unassigned) => Ben Collins Status: Unconfirmed => Fix Committed Target: None => dapper-updates ** Also affects: linux-source-2.6.17 (Ubuntu) Importance: Untriaged Status: Unconfirmed ** Changed in: linux-source-2.6.17 (Ubuntu) Assignee: (unassigned) => Ben Collins Status: Unconfirmed => Fix Committed -- e1000 driver not working properly on x86_64? https://launchpad.net/bugs/56885 From mcanedo at grupogcm.com Wed Sep 20 23:16:54 2006 From: mcanedo at grupogcm.com (mexlinux) Date: Wed, 20 Sep 2006 23:16:54 -0000 Subject: [Bug 42600] Re: Microphone does not work on Dell Inspiron 630m References: <20060502153431.16712.10593.malonedeb@gandwana.ubuntu.com> Message-ID: <20060920231654.17562.96826.malone@gandwana.ubuntu.com> Did it worked?? I can try, if some one gives me a how to compile it.... Or provied a deb for dapper -- Microphone does not work on Dell Inspiron 630m https://launchpad.net/bugs/42600 From ubuntu at quinnh.org Wed Sep 20 23:56:59 2006 From: ubuntu at quinnh.org (QuinnHarris) Date: Wed, 20 Sep 2006 23:56:59 -0000 Subject: [Bug 24925] Re: Unlink after no-IRQ References: <20060113143135.21012.9317.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060920235659.17606.31480.malone@gandwana.ubuntu.com> This has been fixed in Edgy 2.6.17-8-generic. Not sure about Dapper. Thanks. -- Unlink after no-IRQ https://launchpad.net/bugs/24925 From Masterevilace at gmail.com Thu Sep 21 00:07:02 2006 From: Masterevilace at gmail.com (John Benchina) Date: Thu, 21 Sep 2006 00:07:02 -0000 Subject: [Bug 42600] Re: Microphone does not work on Dell Inspiron 630m References: <20060502153431.16712.10593.malonedeb@gandwana.ubuntu.com> Message-ID: <20060921000702.23036.67519.malone@gangotri.ubuntu.com> I have a Dell Inspiron 8000, and my mic does not work. If I set my mic as the input, and turn it on in output as well, I can tap the mic and I hear it. However, Audacity (anyone have any other recommended programs i can test as well?) picks up nothing at all. I'm using Edgy, but it didn't work in Dapper either. -- Microphone does not work on Dell Inspiron 630m https://launchpad.net/bugs/42600 From susancragin at earthlink.net Thu Sep 21 00:18:12 2006 From: susancragin at earthlink.net (susancragin) Date: Thu, 21 Sep 2006 00:18:12 -0000 Subject: [Bug 38263] Re: freeze at startup References: <20060405194706.24486.46138.malonedeb@gangotri.ubuntu.com> Message-ID: <20060921001813.17562.13919.malone@gandwana.ubuntu.com> Acer Ferrari 4005 AMD Turion 64 with ATI mobility radeon X700 Knot 3 & all updates. Last tried 7:30 p.m. EST. Error message 12.105122 MP-BIOS bug: 8254 timer not connected to IO-APIC kernel direct mapping tables up to fee 01000 @ 8000-8000 Now, having said that, I did modify the /etc/X11/xorg.conf file to include the line: Option "MonitorLayout" "LVDS,AUTO" I always do this. Laptop monitor doesn't work otherwise. -- freeze at startup https://launchpad.net/bugs/38263 From chrisboulet at gmail.com Thu Sep 21 00:59:06 2006 From: chrisboulet at gmail.com (ChrisBoulet) Date: Thu, 21 Sep 2006 00:59:06 -0000 Subject: [Bug 61557] Installer crashed References: <20060921002619.17606.74342.malonedeb@gandwana.ubuntu.com> Message-ID: <20060921005906.23105.65388.launchpad@canonical@gangotri.ubuntu.com> Public bug reported: raceback (most recent call last): File "/usr/bin/ubiquity", line 130, in ? install(sys.argv[1]) File "/usr/bin/ubiquity", line 55, in install ret = wizard.run() File "/usr/lib/python2.4/site-packages/ubiquity/frontend/gtkui.py", line 266, in run self.process_step() File "/usr/lib/python2.4/site-packages/ubiquity/frontend/gtkui.py", line 741, in process_step self.mountpoints_to_summary() File "/usr/lib/python2.4/site-packages/ubiquity/frontend/gtkui.py", line 1029, in mountpoints_to_summary self.progress_loop() File "/usr/lib/python2.4/site-packages/ubiquity/frontend/gtkui.py", line 538, in progress_loop raise RuntimeError, ("Install failed with exit code %s; see " RuntimeError: Install failed with exit code -11; see /var/log/installer/syslog and /var/log/syslog ** Affects: linux-source-2.6.15 (Ubuntu) Importance: Untriaged Status: Unconfirmed -- Installer crashed https://launchpad.net/bugs/61557 From cjwatson at canonical.com Thu Sep 21 00:59:06 2006 From: cjwatson at canonical.com (Colin Watson) Date: Thu, 21 Sep 2006 00:59:06 -0000 Subject: [Bug 61557] Re: Installer crashed References: <20060921002619.17606.74342.malonedeb@gandwana.ubuntu.com> Message-ID: <20060921005906.23105.96240.malone@gangotri.ubuntu.com> There's a kernel oops in there. This is probably a bad CD (so do an integrity check, try cleaning your drive lens, etc.), but I'll reassign to the kernel just in case. ** Changed in: ubiquity (Ubuntu) Sourcepackagename: ubiquity => linux-source-2.6.15 -- Installer crashed https://launchpad.net/bugs/61557 From ben.collins at ubuntu.com Thu Sep 21 01:32:22 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Thu, 21 Sep 2006 01:32:22 -0000 Subject: [Bug 24533] Re: [Bug 24533] Re: [Bug 24533] Re: Fail to boot smp kernel References: <20060113142932.21012.10689.launchpad@macquarie.warthogs.hbd.com> <20060920205233.17606.78237.malone@gandwana.ubuntu.com> Message-ID: <1158802344.4594.347.camel@grayson.internal.net> On Wed, 2006-09-20 at 23:13 +0000, Richard Green wrote: > That's not the issue. the 386 kernel is the default, and is what I've been > running. The desire for a 686 non-SMP kernel is to determine if the > problem is with the 686 optimizations or the SMP code. > WHat I really want is for someone with knowledge of the kernel internals > to look at Paul's patches and see if they're appropriate to apply to the > current 686smp kernel source. I'm not a C programmer, and I haven't even > configured and compiled a kernel since it went modular, so I don't trust > my own opinion on the subject... How about booting the 686 kernel with the nosmp on the boot command line? As for the patch, it's _way_ too invasive to even consider for dapper. If you want, you can try the Edgy Knot-3 LiveCD to see if it fixes your problem. -- Fail to boot smp kernel https://launchpad.net/bugs/24533 From psientist at gmail.com Thu Sep 21 01:44:18 2006 From: psientist at gmail.com (discord) Date: Thu, 21 Sep 2006 01:44:18 -0000 Subject: [Bug 59983] Re: [Bug 59983] Re: ndiswrapper in edgy broken References: <20060911235728.16647.6163.malonedeb@gangotri.ubuntu.com> <20060920203437.17606.55091.malone@gandwana.ubuntu.com> Message-ID: I didn't keep that ndiswrapper-1.1 maybe i forgot to mention to remove it. On 9/20/06, ayoli wrote: > > add the issue too, and the "possible solution" works too. so have linked > /usr/sbin/ndiwswrapper-1.8 to /usr/sbin/ndiwswrapper. > btw if ndiwswrapper-1.1 doesn't work and there is a newer version, why we > keep the old as default install ? > > -- > ndiswrapper in edgy broken > https://launchpad.net/bugs/59983 > -- ndiswrapper in edgy broken https://launchpad.net/bugs/59983 From rtg at aapsc.com Thu Sep 21 02:03:51 2006 From: rtg at aapsc.com (Richard Green) Date: Thu, 21 Sep 2006 02:03:51 -0000 Subject: [Bug 24533] Re: [Bug 24533] Re: [Bug 24533] Re: [Bug 24533] Re: Fail to boot smp kernel References: <20060113142932.21012.10689.launchpad@macquarie.warthogs.hbd.com> <20060920205233.17606.78237.malone@gandwana.ubuntu.com> <1158802344.4594.347.camel@grayson.internal.net> Message-ID: On Thu, 21 Sep 2006, Ben Collins wrote: > How about booting the 686 kernel with the nosmp on the boot command > line? That was suggested earlier, and I reported that it threw all kind of wierd missing interrupt errors, finally giving up on mounting the disk, and dropped me into busybox. > > As for the patch, it's _way_ too invasive to even consider for dapper. What do you mean by 'invasive'? Affects too many areas of the kernel? Too much of a bear to test? > > If you want, you can try the Edgy Knot-3 LiveCD to see if it fixes your > problem. DOes that include an SMP kernel? All the *buntu distros I've used before do no CPU hardware detection, and just install the default 386 kernel. How would a 'live' CD anyway detect the PIII and switch to the 686SMP kernel mid-boot? -- Rick Green "Those who would give up essential Liberty, to purchase a little temporary Safety, deserve neither Liberty nor Safety." -Benjamin Franklin -- Fail to boot smp kernel https://launchpad.net/bugs/24533 From ben.collins at ubuntu.com Thu Sep 21 02:09:24 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Thu, 21 Sep 2006 02:09:24 -0000 Subject: [Bug 57502] Re: [Bug 57502] Re: JMicron PATA/SATA Controller does not work References: <20060823192235.13463.13121.malonedeb@gandwana.ubuntu.com> <20060920224402.23036.23550.malone@gangotri.ubuntu.com> Message-ID: <1158804564.4594.358.camel@grayson.internal.net> On Wed, 2006-09-20 at 22:44 +0000, Thunder.m wrote: > Hi I am using debian sid with vanilla kernel 2.6.18, evrything works. 1) Please do not paste large output into comments. You can attach files. It helps preserve formatting and saves me from scrolling through the bug report. 2) When asked for dmesg output to debug a problem, provide the dmesg for the kernel in question, not another kernel. 3) Your problem is not related to JMicron. According to your dmesg, you have no drives attached to the JMicron controller. The 300GB drives you have are connected to the ICH8 controller. Everyone here needs to confirm that they have in fact connected drives to the JMicron controller and not a similar ICH8 controller to the person who just sent this last dmesg output. I just did patches for ata_piix/ich8. The build of this kernel will be here in a few hours: http://people.ubuntu.com/~bcollins/kernels-daily/2006-09-21/ -- JMicron PATA/SATA Controller does not work https://launchpad.net/bugs/57502 From oscar at pearceenterprises.com Thu Sep 21 02:58:51 2006 From: oscar at pearceenterprises.com (Oscar Pearce) Date: Thu, 21 Sep 2006 02:58:51 -0000 Subject: [Bug 51847] Re: p4-clockmod and "N60 errata" patch References: <20060704144130.23781.62390.malonedeb@gangotri.ubuntu.com> Message-ID: <20060921025851.17606.24704.malone@gandwana.ubuntu.com> Please revert this change - my laptop crashes (hard) with the lower limit. I confess that I didn't entirely understand what the erratum meant (and I still don't) when I wrote the N60 errata patch last year, as I'm nowhere near an expert on the Pentium 4 architecture. There may very well be some other change that would enable more efficient use of power on affected systems. The way the kernel's power management code uses the processor now, however, requires the 2 GHz limit. The erratum is available at the bottom of page 49 of the pdf at http://download.intel.com/design/Pentium4/specupdt/24919965.pdf if someone better at Pentium 4 internals wants to take a crack at a more efficient patch. -- p4-clockmod and "N60 errata" patch https://launchpad.net/bugs/51847 From swaaye at yahoo.com Thu Sep 21 03:22:08 2006 From: swaaye at yahoo.com (swaaye) Date: Thu, 21 Sep 2006 03:22:08 -0000 Subject: [Bug 61580] Winbook XLi - PS2 Mouse/Touchpad very, very choppy References: <20060921032208.17562.79298.malonedeb@gandwana.ubuntu.com> Message-ID: <20060921032208.17562.79298.malonedeb@gandwana.ubuntu.com> Public bug reported: This machine is a Pentium II 233 notebook with 192 MB RAM and a new HDD. Ubuntu or Xubuntu boot up fine off the CD, but once into the GUI mouse movement is horribly slow with the pointer jumping across the screen. Mouse clicks very delayed. Did search on Google for this machine vs. Linux and found: http://www.ncsa.uiuc.edu/~pointer/xli/linux-xli-howto-1.html My machine is as described on that page and results sound similar except I don't see a lock up, just very very slow and delayed mouse behavior. ** Affects: linux-source-2.6.15 (Ubuntu) Importance: Untriaged Status: Unconfirmed -- Winbook XLi - PS2 Mouse/Touchpad very, very choppy https://launchpad.net/bugs/61580 From rtg at aapsc.com Thu Sep 21 03:39:20 2006 From: rtg at aapsc.com (Richard Green) Date: Thu, 21 Sep 2006 03:39:20 -0000 Subject: [Bug 24533] Re: Fail to boot smp kernel References: <20060113142932.21012.10689.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060921033920.17562.17907.malone@gandwana.ubuntu.com> I was also looking at the discussion on bug # 16873, which appears to be the same problem, but they are looking at the radeon driver side rather than the kernel, and they appear to have a patch that's looking promising, but it's edgy only at this point. But a 'stable release' (does that mean dapper?) will probably be made soon. Now this brings up a more basic question: Does the Radeon driver run as a kernel module, so when it crashes, it takes the kernel with it, or does it run in userspace? I ask the question because if it is the latter, then fixing the driver would only be a circumvention, not a fix for the kernel lockups, right? In that case, we should keep the broken radeon driver around, and make sure the appropriate hardware gets to a kernel developer who can use it to discover the underlying kernel bug. -- Fail to boot smp kernel https://launchpad.net/bugs/24533 From d_rosky at nccn.net Thu Sep 21 04:29:55 2006 From: d_rosky at nccn.net (Dave Rosky) Date: Thu, 21 Sep 2006 04:29:55 -0000 Subject: [Bug 61586] suspend-to-ram high power upon resume + ehci_hcd References: <20060921042955.17562.108.malonedeb@gandwana.ubuntu.com> Message-ID: <20060921042955.17562.108.malonedeb@gandwana.ubuntu.com> Public bug reported: Binary package hint: linux-image-2.6.15-27-686 This bug applies to dapper, I haven't tested edgy. On this laptop (Dell Inspiron 9400), suspend to ram and resume appears to work, but I noticed that the idle power is much higher upon resume than before suspending (around 25% higher). Note, the cpu usage is normal upon resume (~100% idle), and the C states look normal. I tried many things, but finally traced the problem down to the USB system, in particular ehci_hcd. I tried removing all USB modules before suspending, and when I resumed, the power was normal. I then started re-inserting the USB modules. I first re-inserted uhci_hcd and the power stayed normal (and the USB mouse got detected). I then re- inserted ehci_hcd and the abnormally high power returned. I don't know if this is a problem with hardware or with the driver. Is there a way of resetting the USB controller hardware after a resume? If there is, I can try that. Dave ** Affects: linux-source-2.6.15 (Ubuntu) Importance: Untriaged Status: Unconfirmed -- suspend-to-ram high power upon resume + ehci_hcd https://launchpad.net/bugs/61586 From d_rosky at nccn.net Thu Sep 21 04:34:25 2006 From: d_rosky at nccn.net (Dave Rosky) Date: Thu, 21 Sep 2006 04:34:25 -0000 Subject: [Bug 61586] Re: suspend-to-ram high power upon resume + ehci_hcd References: <20060921042955.17562.108.malonedeb@gandwana.ubuntu.com> Message-ID: <20060921043425.17606.33906.malone@gandwana.ubuntu.com> An additional observation: On the same laptop (Inspiron 9400), SuSE 10.1 can suspend-to-ram and resume without the abnormally high power upon resume. Dave -- suspend-to-ram high power upon resume + ehci_hcd https://launchpad.net/bugs/61586 From ben.collins at ubuntu.com Thu Sep 21 05:14:16 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Thu, 21 Sep 2006 05:14:16 -0000 Subject: [Bug 24533] Re: [Bug 24533] Re: [Bug 24533] Re: [Bug 24533] Re: [Bug 24533] Re: Fail to boot smp kernel References: <20060113142932.21012.10689.launchpad@macquarie.warthogs.hbd.com> <20060920205233.17606.78237.malone@gandwana.ubuntu.com> <1158802344.4594.347.camel@grayson.internal.net> Message-ID: <1158815657.4594.376.camel@grayson.internal.net> > > If you want, you can try the Edgy Knot-3 LiveCD to see if it fixes your > > problem. > DOes that include an SMP kernel? All the *buntu distros I've used before > do no CPU hardware detection, and just install the default 386 kernel. > How would a 'live' CD anyway detect the PIII and switch to the 686SMP > kernel mid-boot? I think you are misunderstanding what our "SMP" kernel is. It's an SMP-alt kernel, meaning when you boot it on a non-SMP system, it switches it's internal code (at boot) to more UP like functions). That's the reason we did away with the 686-smp/686 setup. It wasn't needed anymore. That said, we now have a -generic kernel in edgy which is SMP enabled, and can be used on k7/686. This kernel is on our livecd for edgy, so yes, it will be SMP from this CD. -- Fail to boot smp kernel https://launchpad.net/bugs/24533 From ben.collins at ubuntu.com Thu Sep 21 05:23:23 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Thu, 21 Sep 2006 05:23:23 -0000 Subject: [Bug 60893] Re: Server Kernel update (47) prevents booting! References: <20060917092936.28941.75352.malonedeb@gandwana.ubuntu.com> Message-ID: <20060921052323.17606.92541.malone@gandwana.ubuntu.com> Boot the rescue cd. -- Server Kernel update (47) prevents booting! https://launchpad.net/bugs/60893 From ben.collins at ubuntu.com Thu Sep 21 05:41:36 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Thu, 21 Sep 2006 05:41:36 -0000 Subject: [Bug 61557] Re: Installer crashed References: <20060921002619.17606.74342.malonedeb@gandwana.ubuntu.com> Message-ID: <20060921054136.23036.49385.malone@gangotri.ubuntu.com> Yeah, the bad cd route seems possible. Please test this with a 6.06.1 CD. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Unconfirmed => Needs Info -- Installer crashed https://launchpad.net/bugs/61557 From ubuntu-launchpad at theplayboymansion.net Thu Sep 21 06:04:22 2006 From: ubuntu-launchpad at theplayboymansion.net (ph8) Date: Thu, 21 Sep 2006 06:04:22 -0000 Subject: [Bug 57502] Re: JMicron PATA/SATA Controller does not work References: <20060823192235.13463.13121.malonedeb@gandwana.ubuntu.com> Message-ID: <20060921060422.23036.83199.malone@gangotri.ubuntu.com> Hi Ben, Thanks for getting back, unfortunately I don't have another machine with SATA II support available so I'm stuck waiting for the daily CD/DVD images assuming there's no guide on how to build my own install cd with your kernels? Attached is lspci -v on a machine with the ASUS P5B (not the deluxe one) with one DVD drive (IDE) and two SATA IIs - I can get around the cdrom not there issue by booting to USB disk, but then my SATA's don't get detected which *might* be the ata_piix issue you've just fixed, i'll try the first daily your kernel's in and let you know here. ** Attachment added: "lspci -v" http://librarian.launchpad.net/4373419/one.v -- JMicron PATA/SATA Controller does not work https://launchpad.net/bugs/57502 From ubuntu-launchpad at theplayboymansion.net Thu Sep 21 06:05:10 2006 From: ubuntu-launchpad at theplayboymansion.net (ph8) Date: Thu, 21 Sep 2006 06:05:10 -0000 Subject: [Bug 57502] Re: JMicron PATA/SATA Controller does not work References: <20060823192235.13463.13121.malonedeb@gandwana.ubuntu.com> Message-ID: <20060921060510.23105.33916.malone@gangotri.ubuntu.com> And lspci-vv ** Attachment added: "lspci -vv" http://librarian.launchpad.net/4373420/two.v -- JMicron PATA/SATA Controller does not work https://launchpad.net/bugs/57502 From tristandegroof at evonet.be Thu Sep 21 06:56:43 2006 From: tristandegroof at evonet.be (TRiSS) Date: Thu, 21 Sep 2006 06:56:43 -0000 Subject: [Bug 24925] Re: Unlink after no-IRQ References: <20060113143135.21012.9317.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060921065643.23105.61336.malone@gangotri.ubuntu.com> It seems fixed with the latest kernel update for dapper, i believe it was 2.6.17-27-k7 (can't check version right now) -- Unlink after no-IRQ https://launchpad.net/bugs/24925 From ayolinux at gmail.com Thu Sep 21 08:14:53 2006 From: ayolinux at gmail.com (ayoli) Date: Thu, 21 Sep 2006 08:14:53 -0000 Subject: [Bug 59983] Re: ndiswrapper in edgy broken References: <20060911235728.16647.6163.malonedeb@gangotri.ubuntu.com> Message-ID: <20060921081453.17562.90273.malone@gandwana.ubuntu.com> @discord: i meant why edgy keep version 1.1 in the repos as default version installed when apt-get install ndiswrapper-utils. -- ndiswrapper in edgy broken https://launchpad.net/bugs/59983 From paolog.71 at libero.it Thu Sep 21 08:11:54 2006 From: paolog.71 at libero.it (Paolo Grifa) Date: Thu, 21 Sep 2006 08:11:54 -0000 Subject: [Bug 51847] Re:[Bug 51847] Re: p4-clockmod and "N60 errata" patch References: <20060704144130.23781.62390.malonedeb@gangotri.ubuntu.com> Message-ID: Hi, I am sorry but I can't reverse this change (i don't know how to do it). I just submitted a bug and a possible solution. In June I had a discussion with an engineer from University who is an expert about cpus. I told him about my problem that is my cpu not going under 2Ghz even if it has not bug "n60", and he told me that only little production of PIV had this bug and that anyway it was possible to lower way under 2 Ghz, safely. So I just found the lines of code in p4-clockmod where it sets the lower frequency and recompiled some kernels with lower frequencies and I tested on an old notebook (Acer Aspire) that had cpu with bug. I found that it was only crashing (hung and reboot) at lowest frequency, that was 400 or 500, I don't remember... but it was not 2Ghz... I don't know about this 2Ghz limit that you say. Maybe behaviour differs with different power management. So I just proposed to resolve the bug putting 700Mhz instead of 2Ghz. It is my first bug reporting and I didn't know that they would have put in the kernel my code without any more testing. I do not have any lab or similar to do proper testing.... So... what shall we do? I am not an expert... I believe that perhaps they should change kernel power management instead of limiting frequencies.... > Please revert this change - my laptop crashes (hard) with the lower > limit. > > I confess that I didn't entirely understand what the erratum meant (and > I still don't) when I wrote the N60 errata patch last year, as I'm > nowhere near an expert on the Pentium 4 architecture. There may very > well be some other change that would enable more efficient use of power > on affected systems. The way the kernel's power management code uses > the processor now, however, requires the 2 GHz limit. > > The erratum is available at the bottom of page 49 of the pdf at > http://download.intel.com/design/Pentium4/specupdt/24919965.pdf if > someone better at Pentium 4 internals wants to take a crack at a more > efficient patch. > > -- > p4-clockmod and "N60 errata" patch > https://launchpad.net/bugs/51847 > -- p4-clockmod and "N60 errata" patch https://launchpad.net/bugs/51847 From psientist at gmail.com Thu Sep 21 09:12:53 2006 From: psientist at gmail.com (discord) Date: Thu, 21 Sep 2006 09:12:53 -0000 Subject: [Bug 59983] Re: [Bug 59983] Re: ndiswrapper in edgy broken References: <20060911235728.16647.6163.malonedeb@gangotri.ubuntu.com> <20060921081453.17562.90273.malone@gandwana.ubuntu.com> Message-ID: good question. I guess maybe compatibility? Anyways maybe ask the package maintainer. Would be nice to see the wireless working better under linux. On 9/21/06, ayoli wrote: > > @discord: i meant why edgy keep version 1.1 in the repos as default > version installed when apt-get install ndiswrapper-utils. > > -- > ndiswrapper in edgy broken > https://launchpad.net/bugs/59983 > -- ndiswrapper in edgy broken https://launchpad.net/bugs/59983 From jbouzane at gmail.com Thu Sep 21 09:19:29 2006 From: jbouzane at gmail.com (Jason Bouzane) Date: Thu, 21 Sep 2006 09:19:29 -0000 Subject: [Bug 59136] Re: Real time clock (RTC) runs 50% too fast when speedstep is enabled References: <20060906071114.3933.75618.malonedeb@gandwana.ubuntu.com> Message-ID: <20060921091929.17562.47284.malone@gandwana.ubuntu.com> It doesn't boot. I suspect that change # 79e453d49bd49ba1b576f89310cc565c9e4ca379 will fix the problem (it's a 965 board). See: http://www.kernel.org/git/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=79e453d49bd49ba1b576f89310cc565c9e4ca379 Perhaps this revert should be applied to the base Kubuntu image before release? -- Real time clock (RTC) runs 50% too fast when speedstep is enabled https://launchpad.net/bugs/59136 From kungfoobar at gmail.com Thu Sep 21 09:53:28 2006 From: kungfoobar at gmail.com (Alberto Torres) Date: Thu, 21 Sep 2006 09:53:28 -0000 Subject: [Bug 34831] Re: Hardlock of entire system (Dapper Flight 5) References: <20060314003317.30057.9117.malonedeb@gandwana.ubuntu.com> Message-ID: <20060921095328.23036.44433.malone@gangotri.ubuntu.com> I think I've found the problematic module! Please confirm this works: sudo modprobe -r snd_seq_virmidi sudo modprobe snd-rtctimer I think snd_seq_virmidi is the problematic module because it's used by snd_emux_synth and snd_emu10k1_synth which I don't use at all. In my last post I said that snd_emu10k1_synth was the problem, but after removing that module my system crashed as well 10 minutes after using MIDI. After removing snd_seq_virmidi, it always works for me so far. Also, I think snd-rtctimer has something to do with it: Whithout loading/unloading it manually, it seems to be loaded each time it works, and not loaded each time it doesn't. -- Hardlock of entire system (Dapper Flight 5) https://launchpad.net/bugs/34831 From launchpad.20.wackelzahn at spamgourmet.com Thu Sep 21 10:58:10 2006 From: launchpad.20.wackelzahn at spamgourmet.com (arne steffens) Date: Thu, 21 Sep 2006 10:58:10 -0000 Subject: [Bug 57502] Output from lspci -vv lspci -vvn dmesg References: <20060823192235.13463.13121.malonedeb@gandwana.ubuntu.com> Message-ID: <20060921105810.17606.84432.malone@gandwana.ubuntu.com> Hi, I am using a MSI P965 Neo-F Motherboard which uses the JMicron JMB361 controller (according to msi.com.tw). The DVD drive (IDE) is connected to the JMicron controller, the SataII-HD is NOT connected to the controller. The Attachement includes the output from lspci -vv, lspci -vvn and dmesg using the daily build of 2006-09-21. I hope I could be of assistance. ** Attachment added: "Output from lspci and dmesg" http://librarian.launchpad.net/4377338/lspci_dmesg.zip -- JMicron PATA/SATA Controller does not work https://launchpad.net/bugs/57502 From d_rosky at nccn.net Thu Sep 21 11:22:42 2006 From: d_rosky at nccn.net (Dave Rosky) Date: Thu, 21 Sep 2006 11:22:42 -0000 Subject: [Bug 61586] suspend-to-ram high power upon resume + ehci_hcd References: <20060921042955.17562.108.malonedeb@gandwana.ubuntu.com> Message-ID: <20060921112242.17606.28481.launchpad@canonical@gandwana.ubuntu.com> Public bug reported: Binary package hint: linux-image-2.6.15-27-686 This bug applies to dapper, I haven't tested edgy. On this laptop (Dell Inspiron 9400), suspend to ram and resume appears to work, but I noticed that the idle power is much higher upon resume than before suspending (around 25% higher). Note, the cpu usage is normal upon resume (~100% idle), and the C states look normal. I tried many things, but finally traced the problem down to the USB system, in particular ehci_hcd. I tried removing all USB modules before suspending, and when I resumed, the power was normal. I then started re-inserting the USB modules. I first re-inserted uhci_hcd and the power stayed normal (and the USB mouse got detected). I then re- inserted ehci_hcd and the abnormally high power returned. I don't know if this is a problem with hardware or with the driver. Is there a way of resetting the USB controller hardware after a resume? If there is, I can try that. Dave ** Affects: linux-source-2.6.15 (Ubuntu) Importance: Untriaged Status: Unconfirmed -- suspend-to-ram high power upon resume + ehci_hcd https://launchpad.net/bugs/61586 From sargosis at gmail.com Thu Sep 21 11:17:53 2006 From: sargosis at gmail.com (sargosis) Date: Thu, 21 Sep 2006 11:17:53 -0000 Subject: [Bug 57502] Re: JMicron PATA/SATA Controller does not work References: <20060823192235.13463.13121.malonedeb@gandwana.ubuntu.com> Message-ID: <20060921111753.17562.65924.malone@gandwana.ubuntu.com> I can confirm that my DVD-RW and my CD-RW are connected to the JMicron Controller. Only my HDDs are connected to the ICH8. I just bought an ASUS P5B mobo (and CPU, hard drives, and video card) that until this all gets cleared up is acting as a $900 paperweight. I just wanted to say thanks to Bill for working on this. I realize that it must be hard to fix a problem that's hardware related when most of the people are complaining instead of offerring info. As for myself, I'd offer anything i could, but i've never even used linux yet. I was hoping to make the switch this week, but encountered this problem. -- JMicron PATA/SATA Controller does not work https://launchpad.net/bugs/57502 From mjg59 at codon.org.uk Thu Sep 21 11:22:41 2006 From: mjg59 at codon.org.uk (Matthew Garrett) Date: Thu, 21 Sep 2006 11:22:41 -0000 Subject: [Bug 61586] Re: suspend-to-ram high power upon resume + ehci_hcd References: <20060921042955.17562.108.malonedeb@gandwana.ubuntu.com> Message-ID: <20060921112241.17606.55670.malone@gandwana.ubuntu.com> No, kernel bugs should be assigned to the kernel. ** Changed in: acpi-support (Ubuntu) Sourcepackagename: acpi-support => linux-source-2.6.15 -- suspend-to-ram high power upon resume + ehci_hcd https://launchpad.net/bugs/61586 From antonioricardo.correia at gmail.com Thu Sep 21 11:25:32 2006 From: antonioricardo.correia at gmail.com (Antonio Ricardo Soares da Silva Correia) Date: Thu, 21 Sep 2006 11:25:32 -0000 Subject: [Bug 24533] Re: Fail to boot smp kernel References: <20060113142932.21012.10689.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060921112533.23105.98006.malone@gangotri.ubuntu.com> Ben, what I want is to be able to run the 686 SMP kernel like I manage to do in other dists and, while this issue is not solved, to be at least able to run the 686 non SMP kernel as I used to with Hoary and Breezy. Not only this hasn´t been solved since Hoary but now I even don´t have the possibility to run a 686 kernel because it was widrawn from the repositories and replaced with the SMP version (though not described as so) and that one never worked with my computer. I´m using the 386 kernel because I have no other choice but I feel like having a Ferrari with a Fiat 500 engine... -- Fail to boot smp kernel https://launchpad.net/bugs/24533 From antonioricardo.correia at gmail.com Thu Sep 21 11:48:05 2006 From: antonioricardo.correia at gmail.com (Antonio Ricardo Soares da Silva Correia) Date: Thu, 21 Sep 2006 11:48:05 -0000 Subject: [Bug 24533] Re: Fail to boot smp kernel References: <20060113142932.21012.10689.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060921114805.23105.21148.malone@gangotri.ubuntu.com> Ben, I will try the nosmp option on boot to see if at least I can run the 686 kernel. I´ll let you know if it works. -- Fail to boot smp kernel https://launchpad.net/bugs/24533 From antonioricardo.correia at gmail.com Thu Sep 21 11:45:27 2006 From: antonioricardo.correia at gmail.com (Antonio Ricardo Soares da Silva Correia) Date: Thu, 21 Sep 2006 11:45:27 -0000 Subject: [Bug 24533] Re: Fail to boot smp kernel References: <20060113142932.21012.10689.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060921114527.23105.42248.malone@gangotri.ubuntu.com> Richard, Though I have some knowledge of C it´s not that deep so I can´t comment on Paul´s patches. I know 386 is the default kernel in many distributions but I´ve got used to using the 686 because my first dist, years ago, was Mandrake and on install it detected the kind of processor and installed by default 686/SMP as the default kernel for my machine. Both the 686 and 686/SMP kernels provide better performance for a Pentium 4 (or better machine) otherwise it would make no sense having them. The 386 kernel should work also with an Atlon 64 that is backwards compatible with Intel x86 code but it won´t take full profit of the processor and that´s why there is a kernel version for it (and other AMD processors as a matter of fact). So my point is I want to be able to use my machine to the full extent of the speed and other possibilities of it´s hardware and not be limited to the bare bones 386 kernel that ignores the most of the microcode in my processor. Appart from 3rd world countries I don´t suppose there are many of us around still using a 386 or even a 486 and that would need the that version of the kernel. -- Fail to boot smp kernel https://launchpad.net/bugs/24533 From xcover at gmail.com Thu Sep 21 11:58:31 2006 From: xcover at gmail.com (C0VER) Date: Thu, 21 Sep 2006 11:58:31 -0000 Subject: [Bug 57502] Re: JMicron PATA/SATA Controller does not work References: <20060823192235.13463.13121.malonedeb@gandwana.ubuntu.com> Message-ID: <20060921115831.23036.57080.malone@gangotri.ubuntu.com> it doesn't work here too, the cd just dont load... -- JMicron PATA/SATA Controller does not work https://launchpad.net/bugs/57502 From karvinen+launchpad at iki.fi Thu Sep 21 12:08:41 2006 From: karvinen+launchpad at iki.fi (Tero Karvinen) Date: Thu, 21 Sep 2006 12:08:41 -0000 Subject: [Bug 36619] Re: usb-mass storage disk isn't recognized the right way References: <20060325183618.6253.2445.malonedeb@gandwana.ubuntu.com> Message-ID: <20060921120841.23105.98113.malone@gangotri.ubuntu.com> I don't have test machines with Firewire, so unfortunately I can't test it. Can someone else try this with Firewire? I tested that it is not working with USB mass storage. I think USB problem is more serious, as it is much more common. -- usb-mass storage disk isn't recognized the right way https://launchpad.net/bugs/36619 From karvinen+launchpad at iki.fi Thu Sep 21 12:10:38 2006 From: karvinen+launchpad at iki.fi (Tero Karvinen) Date: Thu, 21 Sep 2006 12:10:38 -0000 Subject: [Bug 24925] Re: Unlink after no-IRQ References: <20060113143135.21012.9317.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060921121038.23105.83915.malone@gangotri.ubuntu.com> > It seems fixed with the latest kernel update > for dapper, i believe it was 2.6.17-27-k7 There is no 2.6.17 in Dapper. Do you mean 2.6.15-27? I am running Dapper and still have no usb working - my problem might be different than this bug (Bug #36619). -- Unlink after no-IRQ https://launchpad.net/bugs/24925 From ben.collins at ubuntu.com Thu Sep 21 12:14:49 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Thu, 21 Sep 2006 12:14:49 -0000 Subject: [Bug 24533] Re: [Bug 24533] Re: Fail to boot smp kernel References: <20060113142932.21012.10689.launchpad@macquarie.warthogs.hbd.com> <20060921112533.23105.98006.malone@gangotri.ubuntu.com> Message-ID: <1158840890.4594.414.camel@grayson.internal.net> On Thu, 2006-09-21 at 11:25 +0000, Antonio Ricardo Soares da Silva Correia wrote: > Ben, > > what I want is to be able to run the 686 SMP kernel like I manage to do in other dists and, while this issue is not solved, to be at least able to run the 686 non SMP kernel as I used to with Hoary and Breezy. Not only this hasn´t been solved since Hoary but now I even don´t have the possibility to run a 686 kernel because it was widrawn from the repositories and replaced with the SMP version (though not described as so) and that one never worked with my computer. > I´m using the 386 kernel because I have no other choice but I feel like having a Ferrari with a Fiat 500 engine... Believe me when I tell you that the performance gain of using a -686 kernel (non-SMP) over the -386 kernel is less than 1%. There is not enough to even worry about the benefit. So continue use the -386 kernel, with the comfort that it isn't degrading your performance as much as you think :) The whole reason we went with -generic, -386 kernels in Edgy is because the -686 and -k7 Alt-SMP kernels there didn't improve performance enough over the -generic version to warrant them either. -- Fail to boot smp kernel https://launchpad.net/bugs/24533 From ben.collins at ubuntu.com Thu Sep 21 13:01:22 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Thu, 21 Sep 2006 13:01:22 -0000 Subject: [Bug 57502] Re: JMicron PATA/SATA Controller does not work References: <20060823192235.13463.13121.malonedeb@gandwana.ubuntu.com> Message-ID: <20060921130122.23036.12660.malone@gangotri.ubuntu.com> I think I've found the commit that actually fixes this. The patches and bug reports were leading me to believe this was a bug entirely in the ahci driver, but in fact, it's a combination of that and the IDE layer. I've cherry-picked some patches out of 2.6.18 that should resolve the problem. I'm upload kernel source today, which should build by the end of the day, and there should be new daily ISO's tomorrow with this kernel on it. -- JMicron PATA/SATA Controller does not work https://launchpad.net/bugs/57502 From antonioricardo.correia at gmail.com Thu Sep 21 13:03:44 2006 From: antonioricardo.correia at gmail.com (Antonio Ricardo Soares da Silva Correia) Date: Thu, 21 Sep 2006 13:03:44 -0000 Subject: [Bug 24533] Re: Fail to boot smp kernel References: <20060113142932.21012.10689.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060921130344.23105.30167.malone@gangotri.ubuntu.com> Ben, Thanks for your info on kernel performance. Still, it just behaves as a 386 running at 3Ghz. What about other issues like special instructions and the larger quantities of memory handling available in modern processors. My old 386 system had a 80 Mb hard drive, my current system has a lot more than that as RAM... Futhermore, I have seen several "experts" say that even with a single processor like the Pentium 4 with hyperthreading, enabling SMP can bring benefits at the performance level and optimization of process handling. I can remember at least one application (I suppose it was something regarding SETI) that detected 2 processors under SMP and that gave me the option of using 1 or both and if I´m not wrong K3B can also take profit of that. Don´t you think that, performance issues apart, the 686 kernel, SMP or not, should work fine like in other distributions? After all, it´s not necessary to re-invent the wheel. If they manage to make it work why can´t we in our favorite distribution? In what regards your suggestion I´ve tried to boot the 686 kernel with the nosmp option. It doesn´t work, the system freezes right at the begining. Mounting essential modules ok Mounting root file system and nothing... The hard drive blinks for a few seconds and everything comes to a halt. -- Fail to boot smp kernel https://launchpad.net/bugs/24533 From pc741tw at gmail.com Thu Sep 21 13:08:57 2006 From: pc741tw at gmail.com (MENG HSING.TUNG) Date: Thu, 21 Sep 2006 13:08:57 -0000 Subject: [Bug 57502] Re: JMicron PATA/SATA Controller does not work References: <20060823192235.13463.13121.malonedeb@gandwana.ubuntu.com> Message-ID: <20060921130857.17606.4295.malone@gandwana.ubuntu.com> I have the same problem. Do you really fix it? -- JMicron PATA/SATA Controller does not work https://launchpad.net/bugs/57502 From tristandegroof at evonet.be Thu Sep 21 13:11:18 2006 From: tristandegroof at evonet.be (TRiSS) Date: Thu, 21 Sep 2006 13:11:18 -0000 Subject: [Bug 24925] Re: Unlink after no-IRQ References: <20060113143135.21012.9317.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060921131118.23105.5674.malone@gangotri.ubuntu.com> >> It seems fixed with the latest kernel update >> for dapper, i believe it was 2.6.17-27-k7 > >There is no 2.6.17 in Dapper. Do you mean 2.6.15-27? > >I am running Dapper and still have no usb working - my problem might be >different than this bug (Bug #36619). sorry, my bad, my current kernel, with working usb2.0 is indeed 2.6.15-27-k7! -- Unlink after no-IRQ https://launchpad.net/bugs/24925 From ilcorsaronero at gmail.com Thu Sep 21 14:05:06 2006 From: ilcorsaronero at gmail.com ('ntoni) Date: Thu, 21 Sep 2006 14:05:06 -0000 Subject: [Bug 34831] Re: Hardlock of entire system (Dapper Flight 5) References: <20060314003317.30057.9117.malonedeb@gandwana.ubuntu.com> Message-ID: <20060921140506.17606.79552.malone@gandwana.ubuntu.com> I tried all the tricks you suggested, Alberto, but none of them did the magic for me. I tried to remove snd_emu10k1_synth, to unload snd_seq_virmidi and to load snd-rtctimer. But the situation is the same: rosegarden crashes the whole system while loading. B.T.W. I use a Creative Live! soundcard. -- Hardlock of entire system (Dapper Flight 5) https://launchpad.net/bugs/34831 From victor.petrov at gmail.com Thu Sep 21 14:26:06 2006 From: victor.petrov at gmail.com (Victor Petrov) Date: Thu, 21 Sep 2006 14:26:06 -0000 Subject: [Bug 57502] Re: [Bug 57502] Re: JMicron PATA/SATA Controller does not work References: <20060823192235.13463.13121.malonedeb@gandwana.ubuntu.com> <20060921130857.17606.4295.malone@gandwana.ubuntu.com> Message-ID: Thanks Ben for helping us, the mortal users of Ubuntu. I am sure this will get fixed soon, so guys, be patient please. Do a network installation of Ubuntu (like I did) and you'll have a working OS, unless your HDDs are connected to the Jmicron controller. If you can get it to install on SATA hdds, then compile your own 2.6.18kernel and you'll have your cd/dvd roms. If you don't want or don't know how to compile a kernel, then sit without your CD-Roms until Edgy gets released and please don't make useless comments like : "do you really fix it". Thanks and sorry for being the harsh comment, but I think it's time some of you guys be more quiet. -- JMicron PATA/SATA Controller does not work https://launchpad.net/bugs/57502 From fungus at mbnet.fi Thu Sep 21 15:32:54 2006 From: fungus at mbnet.fi (mouhmouh) Date: Thu, 21 Sep 2006 15:32:54 -0000 Subject: [Bug 48962] cd writing fails from flight-7 installation References: <20060608090834.3580.55389.malonedeb@gangotri.ubuntu.com> Message-ID: <20060921153254.23036.91034.launchpad@canonical@gangotri.ubuntu.com> Public bug reported: I have a Plextor cd/dvd writer and I'm having problems writing cd's with it. DVD writing seems to work fine. The following is the output from k3b, but cd-writing also fails e.g. when trying to write an .iso file using "right-click->Write to disk"... System ----------------------- K3b Version: 0.12.14 KDE Version: 3.5.2 QT Version: 3.3.6 Kernel: 2.6.15-23-386 Devices ----------------------- PLEXTOR DVDR PX-712A 1.06 (/dev/hda, ) at /media/cdrom0 [CD-R; CD-RW; CD-ROM; DVD-ROM; DVD-R; DVD-RW; DVD+R; DVD+RW] [DVD-ROM; DVD-R Sequential; DVD-RW Restricted Overwrite; DVD-RW Sequential; DVD+RW; DVD+R; CD-ROM; CD-R; CD-RW] [SAO; TAO; RAW; SAO/R96P; SAO/R96R; RAW/R16; RAW/R96P; RAW/R96R; Restricted Overwrite] K3b ----------------------- Size of filesystem calculated: 14727 Used versions ----------------------- cdrecord: 2.1.1a01 cdrecord ----------------------- /usr/bin/X11/cdrecord: Warning: Running on Linux-2.6.15-23-386 /usr/bin/X11/cdrecord: There are unsettled issues with Linux-2.5 and newer. /usr/bin/X11/cdrecord: If you have unexpected problems, please try Linux-2.4 or Solaris. scsidev: '/dev/hda' devname: '/dev/hda' scsibus: -2 target: -2 lun: -2 Warning: Open by 'devname' is unintentional and not supported. Linux sg driver version: 3.5.27 Error: Cannot gain SYS_RAWIO capability.Is cdrecord installed SUID root? : Operation not permitted /usr/bin/X11/cdrecord: Warning: using inofficial version of libscg (debian-0.8debian2 '@(#)scsitransp.c 1.91 04/06/17 Copyright 1988,1995,2000-2004 J. Schilling'). SCSI buffer size: 64512 cdrecord command: ----------------------- /usr/bin/X11/cdrecord.mmap -v gracetime=2 dev=/dev/hda speed=48 -tao driveropts=burnfree -eject -multi -xa -tsize=14727s - mkisofs ----------------------- 14727 INFO: UTF-8 character encoding detected by locale settings. Assuming UTF-8 encoded filenames on source filesystem, use -input-charset to override. mkisofs command: ----------------------- /usr/bin/X11/mkisofs -gui -graft-points -volid K3b data project -volset -appid K3B THE CD KREATOR (C) 1998-2005 SEBASTIAN TRUEG AND THE K3B TEAM -publisher -preparer -sysid LINUX -volset-size 1 -volset-seqno 1 -sort /tmp/kde-mina/k3bkliT3a.tmp -rational-rock -hide-list /tmp/kde-mina/k3bfqQAxb.tmp -joliet -hide-joliet-list /tmp/kde-mina/k3ba6xQxa.tmp -full-iso9660-filenames -iso-level 2 -path-list /tmp/kde-mina/k3bHOPhra.tmp ** Affects: linux-source-2.6.15 (Ubuntu) Importance: Untriaged Status: Needs Info -- cd writing fails from flight-7 installation https://launchpad.net/bugs/48962 From ben.collins at ubuntu.com Thu Sep 21 15:28:07 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Thu, 21 Sep 2006 15:28:07 -0000 Subject: [Bug 26940] Re: Kernel 2.6.15-7-686 won't boot with root on SATA disk References: <20060113145204.21012.90778.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060921152807.17562.12469.malone@gandwana.ubuntu.com> But it does boot on edgy, correct? I believe the latest changes I put in edgy (today, upload later) will fix the delay. ** Changed in: linux-source-2.6.17 (Ubuntu) Status: Confirmed => Fix Released -- Kernel 2.6.15-7-686 won't boot with root on SATA disk https://launchpad.net/bugs/26940 From ben.collins at ubuntu.com Thu Sep 21 15:34:33 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Thu, 21 Sep 2006 15:34:33 -0000 Subject: [Bug 61342] Re: Backport Intel 965 Express chipset support from 2.6.18 References: <20060920014823.23036.85753.malonedeb@gangotri.ubuntu.com> Message-ID: <20060921153433.23036.22290.malone@gangotri.ubuntu.com> Also did the DRM/AGP update. -- Backport Intel 965 Express chipset support from 2.6.18 https://launchpad.net/bugs/61342 From ben.collins at ubuntu.com Thu Sep 21 15:29:34 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Thu, 21 Sep 2006 15:29:34 -0000 Subject: [Bug 44805] Re: "critical temperature reached" with kernel 2.6.15-22-386 References: <20060515103402.15848.98592.malonedeb@gangotri.ubuntu.com> Message-ID: <20060921152934.17562.4498.malone@gandwana.ubuntu.com> Can you test against latest edgy (specifically 2.6.17-8.22 kernel)? Thanks ** Changed in: linux-source-2.6.17 (Ubuntu) Status: Confirmed => Needs Info -- "critical temperature reached" with kernel 2.6.15-22-386 https://launchpad.net/bugs/44805 From martin.bergner at online.de Thu Sep 21 15:32:54 2006 From: martin.bergner at online.de (Martin Bergner) Date: Thu, 21 Sep 2006 15:32:54 -0000 Subject: [Bug 48962] Re: cd writing fails from flight-7 installation References: <20060608090834.3580.55389.malonedeb@gangotri.ubuntu.com> Message-ID: <20060921153254.23036.89202.malone@gangotri.ubuntu.com> Hi, thanks for your bug report. Now, that the current version of the linux kernel is 2.6.15-27, do you still have this problem with the latest linux kernel? ** Changed in: Ubuntu Sourcepackagename: None => linux-source-2.6.15 Status: Unconfirmed => Needs Info -- cd writing fails from flight-7 installation https://launchpad.net/bugs/48962 From paniq at paniq.org Thu Sep 21 15:45:02 2006 From: paniq at paniq.org (paniq) Date: Thu, 21 Sep 2006 15:45:02 -0000 Subject: [Bug 49281] machine freezes when playing 3d demos References: <20060610165632.25765.79552.malonedeb@gangotri.ubuntu.com> Message-ID: <20060921154502.23036.56570.launchpad@canonical@gangotri.ubuntu.com> Public bug reported: steps to reproduce: get the source from http://www.linuxdemos.org/demo/indigo or http://exhouse.untergrund.net/warez/demos/portse/traction/indigo/indigo_by_traction_src.zip unpack, make clean, make and run ./indigo after about 5 to 30 seconds, the machine freezes. this happens with all sdl based demos i tried so far, and i have no clue how to debug this, so somebody else might take this on. it seems to be kernel related. ** Affects: linux-source-2.6.15 (Ubuntu) Importance: Untriaged Status: Needs Info -- machine freezes when playing 3d demos https://launchpad.net/bugs/49281 From ubuntu-launchpad at theplayboymansion.net Thu Sep 21 15:43:54 2006 From: ubuntu-launchpad at theplayboymansion.net (ph8) Date: Thu, 21 Sep 2006 15:43:54 -0000 Subject: [Bug 57502] Re: JMicron PATA/SATA Controller does not work References: <20060823192235.13463.13121.malonedeb@gandwana.ubuntu.com> Message-ID: <20060921154354.23036.26881.malone@gangotri.ubuntu.com> It's worth noting that the majority of these Asus P5B Motherboards ship with an unsupported ethernet card, so even a network install is out of the question! If anyone has drives that are not SATA, which is one of the things i've seemed to encounter problems with, you can use the instructions for a "Boot from USB Stick" on the Ubuntu Wiki which gets around the 'CD Not Found' bug. As i said personally once I was past this stage the only available destination for my install was my usb stick alledgedly, not very helpful! :p I'd like to echo Victor's thanks to you and the team Ben, Ubuntu's a quality operating system and I believe one of the first (if not -the- first) server build of linux to port this fix, so if it begins working in the next build you might even get some more users out of it! And we all know how lovely the users are :o) -- JMicron PATA/SATA Controller does not work https://launchpad.net/bugs/57502 From martin.bergner at online.de Thu Sep 21 15:45:02 2006 From: martin.bergner at online.de (Martin Bergner) Date: Thu, 21 Sep 2006 15:45:02 -0000 Subject: [Bug 49281] Re: machine freezes when playing 3d demos References: <20060610165632.25765.79552.malonedeb@gangotri.ubuntu.com> Message-ID: <20060921154502.23036.62358.malone@gangotri.ubuntu.com> Hi, thank you for your bug report. Do you still have these issues with the latest packages? If yes, please post the version of Ubuntu you are running as well as some information about your hardware and which drivers you are using. It may also help if you attach /var/log/kern.log to this bug. ** Changed in: Ubuntu Sourcepackagename: None => linux-source-2.6.15 Status: Unconfirmed => Needs Info -- machine freezes when playing 3d demos https://launchpad.net/bugs/49281 From bradley.benninger at gmail.com Thu Sep 21 16:01:49 2006 From: bradley.benninger at gmail.com (bradley) Date: Thu, 21 Sep 2006 16:01:49 -0000 Subject: [Bug 49311] unable to burn dvd References: <20060610234221.25765.70153.malonedeb@gangotri.ubuntu.com> Message-ID: <20060921160149.17606.11241.launchpad@canonical@gandwana.ubuntu.com> Public bug reported: i have tried to burn a data dvd (.avi files) using both graveman and by just inserting a dvd and using the 'CD/DVD creator'. in graveman it goes through the process of burning the dvd (it took a couple of hours which seemed a bit long). then at the end of the process it says that the dvd has been created sucessfully (or whatever the positive message is) but when i tried to read the dvd it was unreadable (my partner has a Mac with OSX which could not read it either). so then i decided to try dapper's creator but it won't begin the process. it says i should insert a valid disc (i'm using DVD-r, but on the list is only DVD-rw) but i know my burner is capable of DVD-r's because i have used them before. i am using dapper drake, and have the (most-all) restricted formats installed and turned the DMA on so that DVD playback wouldn't be choppy. that is all i can think of that would could have affected the drive. cheers, bradley. ** Affects: linux-source-2.6.15 (Ubuntu) Importance: Untriaged Status: Needs Info -- unable to burn dvd https://launchpad.net/bugs/49311 From martin.bergner at online.de Thu Sep 21 16:01:49 2006 From: martin.bergner at online.de (Martin Bergner) Date: Thu, 21 Sep 2006 16:01:49 -0000 Subject: [Bug 49311] Re: unable to burn dvd References: <20060610234221.25765.70153.malonedeb@gangotri.ubuntu.com> Message-ID: <20060921160149.17606.42365.malone@gandwana.ubuntu.com> Hi, thanks for your bug report. Do you still have this issue with the latest updates? If yes, please try to burn a dvd and attach /var/log/syslog to this bugeport. Also, can you try to run either graveman and/or the CD Creator (nautilus --no-desktop) from a terminal and see if it reports any errors? I think it can be a kernel issue, but it is hard to tell where the problem is. ** Changed in: Ubuntu Sourcepackagename: None => linux-source-2.6.15 Status: Unconfirmed => Needs Info -- unable to burn dvd https://launchpad.net/bugs/49311 From rlrevell at joe-job.com Thu Sep 21 16:30:26 2006 From: rlrevell at joe-job.com (Lee Revell) Date: Thu, 21 Sep 2006 16:30:26 -0000 Subject: [Bug 59909] Re: make-kpkg - fatal error: UTS Release does not match current version References: <20060911133747.16587.26214.malonedeb@gangotri.ubuntu.com> Message-ID: <20060921163026.17562.95982.malone@gandwana.ubuntu.com> *** This bug is a duplicate of bug 58570 *** I am still hitting this bug. ====== making target install/linux-image-2.6.18-rt3-smp-noipv6 [new prereqs: ]====== This is kernel package version 10.049ubuntu4. echo "The UTS Release version in include/linux/version.h"; echo " \"\" "; echo "does not match current version:"; echo " \"2.6.18-rt3-smp-noipv6\" "; echo "Please correct this."; exit 2 The UTS Release version in include/linux/version.h "" does not match current version: "2.6.18-rt3-smp-noipv6" Please correct this. make: *** [install/linux-image-2.6.18-rt3-smp-noipv6] Error 2 -- make-kpkg - fatal error: UTS Release does not match current version https://launchpad.net/bugs/59909 From d_rosky at nccn.net Thu Sep 21 16:39:02 2006 From: d_rosky at nccn.net (Dave Rosky) Date: Thu, 21 Sep 2006 16:39:02 -0000 Subject: [Bug 61586] Re: suspend-to-ram high power upon resume + ehci_hcd References: <20060921042955.17562.108.malonedeb@gandwana.ubuntu.com> Message-ID: <20060921163902.17562.57761.malone@gandwana.ubuntu.com> OK, thanks, I wasn't sure. -- suspend-to-ram high power upon resume + ehci_hcd https://launchpad.net/bugs/61586 From maree at montefiore.ulg.ac.be Thu Sep 21 17:04:28 2006 From: maree at montefiore.ulg.ac.be (RaphaelM) Date: Thu, 21 Sep 2006 17:04:28 -0000 Subject: [Bug 57502] Re: JMicron PATA/SATA Controller does not work References: <20060823192235.13463.13121.malonedeb@gandwana.ubuntu.com> Message-ID: <20060921170428.17606.8347.malone@gandwana.ubuntu.com> Hello, I have the same problem with ASUS P5B and CoreDuo, the hard-drive being connected to ICH8 SATA1 port, the DVD drive being connected to P5B PRI_IDE Connector. I also tried to boot from another external DVD drive connected to USB ports, it also hangs after "Uncompressing Linux ... Ok, booting the kernel", but with error messages like: "usb 7-5: device not accepting address 4, error -110". I don't know if this is related, but maybe it can help. Let me know if I can provide more information. Thanks to people trying to solve this. :) -- JMicron PATA/SATA Controller does not work https://launchpad.net/bugs/57502 From kungfoobar at gmail.com Thu Sep 21 17:04:41 2006 From: kungfoobar at gmail.com (Alberto Torres) Date: Thu, 21 Sep 2006 17:04:41 -0000 Subject: [Bug 34831] Re: Hardlock of entire system (Dapper Flight 5) References: <20060314003317.30057.9117.malonedeb@gandwana.ubuntu.com> Message-ID: <20060921170441.17562.16845.malone@gandwana.ubuntu.com> Try this: sudo rmmod `lsmod|cut -d' ' -f1|grep snd_` sudo modprobe snd-seq sudo modprobe snd-emu10k1 sudo modprobe -r snd_seq_virmidi By the way, which SB Live! do you have? I have a 5.1, I've read that 'Value' ones are buggy. http://ubuntustudio.com/wiki/index.php/Audio_Hardware -- Hardlock of entire system (Dapper Flight 5) https://launchpad.net/bugs/34831 From ben.collins at ubuntu.com Thu Sep 21 17:09:02 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Thu, 21 Sep 2006 17:09:02 -0000 Subject: [Bug 38263] Re: freeze at startup References: <20060405194706.24486.46138.malonedeb@gangotri.ubuntu.com> Message-ID: <20060921170903.23036.11742.malone@gangotri.ubuntu.com> Guessing this is the same as the MP-BIOS bug, in which case it should be fixed in edgy, and in dapper-proposed. ** Changed in: linux-source-2.6.17 (Ubuntu) Assignee: (unassigned) => Ben Collins Status: Unconfirmed => Fix Released ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Confirmed => Fix Released ** Changed in: linux-source-2.6.15 (Ubuntu) Target: None => dapper-updates -- freeze at startup https://launchpad.net/bugs/38263 From robzon at kapati.net Thu Sep 21 17:16:03 2006 From: robzon at kapati.net (Robert Nasiadek) Date: Thu, 21 Sep 2006 17:16:03 -0000 Subject: [Bug 58035] Driver for ralink rt73 chipset missing References: <20060828203816.5486.88256.malonedeb@gandwana.ubuntu.com> Message-ID: <20060921171603.17606.58723.launchpad@canonical@gandwana.ubuntu.com> Public bug reported: Binary package hint: ubuntu-desktop There is no driver for rt73 chipset-based cards in Dapper. This makes it very difficult and inconvenient to install such cards. There are many new cards that use this chipset, and as Dapper is a long-term version, it would be good to support them. Driver is available from ralink website and is GPLed. ** Affects: linux-source-2.6.15 (Ubuntu) Importance: Untriaged Status: Unconfirmed -- Driver for ralink rt73 chipset missing https://launchpad.net/bugs/58035 From ben.collins at ubuntu.com Thu Sep 21 17:16:03 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Thu, 21 Sep 2006 17:16:03 -0000 Subject: [Bug 58035] Re: Driver for ralink rt73 chipset missing References: <20060828203816.5486.88256.malonedeb@gandwana.ubuntu.com> Message-ID: <20060921171603.17606.63989.launchpad@gandwana.ubuntu.com> ** Changed in: linux-source-2.6.17 (Ubuntu) Sourcepackagename: linux-source-2.6.17 => linux-source-2.6.15 -- Driver for ralink rt73 chipset missing https://launchpad.net/bugs/58035 From sargosis at gmail.com Thu Sep 21 17:34:24 2006 From: sargosis at gmail.com (sargosis) Date: Thu, 21 Sep 2006 17:34:24 -0000 Subject: [Bug 57502] Re: JMicron PATA/SATA Controller does not work References: <20060823192235.13463.13121.malonedeb@gandwana.ubuntu.com> Message-ID: <20060921173424.17606.96644.malone@gandwana.ubuntu.com> Reply to RaphaelM above: I don't pretend to be an expert, but i've got a very similar system to yours (P5B, Core 2 Duo, SATA HDD, and DVD player in the IDE) and i also had the installation stop on the "Uncompressing Linux...OK Booting the Kernel" screen. I did find some interesting things while i was first booting up my system... first off, it's probably freezing there because you're not using the 64-bit version of the install CD. I completely spaced on the fact that the C2D is 64-bit, so using a 32-bit OS on the CD was making things weird. Seccondly, the mobo itself doesn't like extra USB connections. I tried hooking up my case and the damn thing wouldn't start unless i unplugged those usb ports. It's possible that if you are using an extended port that it doesn't want to recognize it. Hopefully this helps a bit. -- JMicron PATA/SATA Controller does not work https://launchpad.net/bugs/57502 From fungus at mbnet.fi Thu Sep 21 17:41:23 2006 From: fungus at mbnet.fi (mouhmouh) Date: Thu, 21 Sep 2006 17:41:23 -0000 Subject: [Bug 54828] Re: cdrecord fails to burn cd's References: <20060801183755.13364.24610.malonedeb@gangotri.ubuntu.com> Message-ID: <20060921174123.17562.71099.launchpad@gandwana.ubuntu.com> ** Bug 48962 has been marked a duplicate of this bug -- cdrecord fails to burn cd's https://launchpad.net/bugs/54828 From fungus at mbnet.fi Thu Sep 21 17:43:06 2006 From: fungus at mbnet.fi (mouhmouh) Date: Thu, 21 Sep 2006 17:43:06 -0000 Subject: [Bug 48962] Re: cd writing fails from flight-7 installation References: <20060608090834.3580.55389.malonedeb@gangotri.ubuntu.com> Message-ID: <20060921174306.17606.28904.malone@gandwana.ubuntu.com> *** This bug is a duplicate of bug 54828 *** Hi, I reported a new bug after installing from Ubuntu dapper final. Refer to bug 54828 which has been fixed. I got the cd-burning working at some point. I cannot confirm any changes to cd burning due to the latest kernel update since I had to swich back to windows due to some hardware issues. Sorry for the inconvenience... should have marked it as a duplicate. I'll know better next time. ** This bug has been marked a duplicate of bug 54828 cdrecord fails to burn cd's -- cd writing fails from flight-7 installation https://launchpad.net/bugs/48962 From alex_mayorga at yahoo.com Thu Sep 21 18:08:40 2006 From: alex_mayorga at yahoo.com (alex_mayorga) Date: Thu, 21 Sep 2006 18:08:40 -0000 Subject: [Bug 34068] Linksys WPC54Gv2 also affected References: <20060308120049.10830.52259.malonedeb@gandwana.ubuntu.com> Message-ID: <20060921180841.17606.59618.malone@gandwana.ubuntu.com> Just confirming that as of September 21, 2006 the problem still exist on Dapper Drake and this work around got me through: cd /lib/firmware/`uname -r`/acx/default sudo mv tiacx111c16 tiacx111c16.old sudo ln -s ../1.2.1.34/tiacx111c16 tiacx111c16 sudo rmmod acx sudo modprobe acx Reference: http://diego.bloog.cl/blog/2006/06/10/configurando-una- linksys-wpc54g-v2-en-ubuntu-dapper/ -- [acx111] USR5410 not working https://launchpad.net/bugs/34068 From paniq at paniq.org Thu Sep 21 18:41:47 2006 From: paniq at paniq.org (paniq) Date: Thu, 21 Sep 2006 18:41:47 -0000 Subject: [Bug 49281] Re: machine freezes when playing 3d demos References: <20060610165632.25765.79552.malonedeb@gangotri.ubuntu.com> Message-ID: <20060921184147.23036.70146.malone@gangotri.ubuntu.com> it seems the problems are gone. i have others relating to stuttering sound but i believe this is not a problem of the distro. -- machine freezes when playing 3d demos https://launchpad.net/bugs/49281 From ben.collins at ubuntu.com Thu Sep 21 19:03:00 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Thu, 21 Sep 2006 19:03:00 -0000 Subject: [Bug 44959] Re: sdhci driver kills Suspend/Resume on Dell X1 References: <20060516054511.15848.15714.malonedeb@gangotri.ubuntu.com> Message-ID: <20060921190300.23036.92535.malone@gangotri.ubuntu.com> Please try latest Edgy kernel 2.6.17-8.22. -- sdhci driver kills Suspend/Resume on Dell X1 https://launchpad.net/bugs/44959 From stein.magnus at jodal.no Thu Sep 21 19:25:08 2006 From: stein.magnus at jodal.no (Stein Magnus Jodal) Date: Thu, 21 Sep 2006 19:25:08 -0000 Subject: [Bug 44959] Re: sdhci driver kills Suspend/Resume on Dell X1 References: <20060516054511.15848.15714.malonedeb@gangotri.ubuntu.com> Message-ID: <20060921192508.17606.68856.malone@gandwana.ubuntu.com> Using kernel 2.6.17-8.22 (and with the sdhci module loaded), suspend now works perfectly on the Dell Latitude X1. I regard this bug as solved for Edgy. Thanks :-) -- sdhci driver kills Suspend/Resume on Dell X1 https://launchpad.net/bugs/44959 From frius64 at hotmail.com Thu Sep 21 19:32:04 2006 From: frius64 at hotmail.com (FerranRius) Date: Thu, 21 Sep 2006 19:32:04 -0000 Subject: [Bug 50588] Re: Slow boot time since update to kernel 2.6.15-25-686 References: <20060621173616.23311.67847.malonedeb@gangotri.ubuntu.com> Message-ID: <20060921193204.17606.93979.malone@gandwana.ubuntu.com> My first impressions with the last update (2.6.15-27-686) is that the issue has been fixed, or at list it has improved. The delay on "Mounting Root File System" is not an issue for me any more. I'm not yet sure about the system performance, though. -- Slow boot time since update to kernel 2.6.15-25-686 https://launchpad.net/bugs/50588 From ben.collins at ubuntu.com Thu Sep 21 19:43:57 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Thu, 21 Sep 2006 19:43:57 -0000 Subject: [Bug 50588] Re: Slow boot time since update to kernel 2.6.15-25-686 References: <20060621173616.23311.67847.malonedeb@gangotri.ubuntu.com> Message-ID: <20060921194357.17606.66379.launchpad@gandwana.ubuntu.com> ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Needs Info => Fix Released -- Slow boot time since update to kernel 2.6.15-25-686 https://launchpad.net/bugs/50588 From ben.collins at ubuntu.com Thu Sep 21 19:41:28 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Thu, 21 Sep 2006 19:41:28 -0000 Subject: [Bug 49281] Re: machine freezes when playing 3d demos References: <20060610165632.25765.79552.malonedeb@gangotri.ubuntu.com> Message-ID: <20060921194128.23036.57279.malone@gangotri.ubuntu.com> Thanks for the feedback. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Needs Info => Rejected -- machine freezes when playing 3d demos https://launchpad.net/bugs/49281 From ben.collins at ubuntu.com Thu Sep 21 19:43:22 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Thu, 21 Sep 2006 19:43:22 -0000 Subject: [Bug 44959] Re: sdhci driver kills Suspend/Resume on Dell X1 References: <20060516054511.15848.15714.malonedeb@gangotri.ubuntu.com> Message-ID: <20060921194322.17606.78828.launchpad@gandwana.ubuntu.com> ** Changed in: linux-source-2.6.17 (Ubuntu) Status: Needs Info => Fix Released -- sdhci driver kills Suspend/Resume on Dell X1 https://launchpad.net/bugs/44959 From ben.collins at ubuntu.com Thu Sep 21 19:41:06 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Thu, 21 Sep 2006 19:41:06 -0000 Subject: [Bug 34068] Re: [acx111] USR5410 not working References: <20060308120049.10830.52259.malonedeb@gandwana.ubuntu.com> Message-ID: <20060921194106.17562.51068.launchpad@gandwana.ubuntu.com> *** This bug is a duplicate of bug 30766 *** ** This bug has been marked a duplicate of bug 30766 [acx111] default firmware not working for acx d-link dwl-g650+ -- [acx111] USR5410 not working https://launchpad.net/bugs/34068 From ben.collins at ubuntu.com Thu Sep 21 19:41:06 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Thu, 21 Sep 2006 19:41:06 -0000 Subject: [Bug 30766] Re: [acx111] default firmware not working for acx d-link dwl-g650+ References: <20060207221213.32736.87495.malonedeb@gandwana.ubuntu.com> Message-ID: <20060921194106.17562.1725.launchpad@gandwana.ubuntu.com> ** Bug 34068 has been marked a duplicate of this bug -- [acx111] default firmware not working for acx d-link dwl-g650+ https://launchpad.net/bugs/30766 From philipwyett at blueyonder.co.uk Thu Sep 21 19:49:12 2006 From: philipwyett at blueyonder.co.uk (Philip Wyett) Date: Thu, 21 Sep 2006 19:49:12 -0000 Subject: [Bug 50588] Re: Slow boot time since update to kernel 2.6.15-25-686 References: <20060621173616.23311.67847.malonedeb@gangotri.ubuntu.com> Message-ID: <20060921194912.17562.2502.malone@gandwana.ubuntu.com> For me all the issues I previously listed remain in 2.6.15-27-686. -- Slow boot time since update to kernel 2.6.15-25-686 https://launchpad.net/bugs/50588 From tsurc at tsurc.force9.co.uk Thu Sep 21 19:58:10 2006 From: tsurc at tsurc.force9.co.uk (Alistair Crust) Date: Thu, 21 Sep 2006 19:58:10 -0000 Subject: [Bug 59983] Re: ndiswrapper in edgy broken References: <20060911235728.16647.6163.malonedeb@gangotri.ubuntu.com> Message-ID: <20060921195810.17562.45019.malone@gandwana.ubuntu.com> I found a something in the /usr/sbin/ndiswrapper script. for x in /usr/sbin/ndiswrapper-[^b]* I'm a newbie really but if I take the [^b] out it works. What is this reg' exp' meant to do exactly? I think this bug may also be linked to #45909 and #60630 ? -- ndiswrapper in edgy broken https://launchpad.net/bugs/59983 From marceloshima at gmail.com Thu Sep 21 20:17:02 2006 From: marceloshima at gmail.com (Marcelo Shima) Date: Thu, 21 Sep 2006 20:17:02 -0000 Subject: [Bug 46314] Re: after recent update 3d acceleration with savage does not work References: <20060524110645.23797.61934.malonedeb@gandwana.ubuntu.com> Message-ID: <20060921201702.17562.95484.malone@gandwana.ubuntu.com> This bug probably is fixed on git now. Take a look at https://bugs.freedesktop.org/show_bug.cgi?id=6357. I'll be able to test this git snapshot next week only. -- after recent update 3d acceleration with savage does not work https://launchpad.net/bugs/46314 From jackdachef at gmail.com Thu Sep 21 22:46:38 2006 From: jackdachef at gmail.com (dalinuxlova) Date: Thu, 21 Sep 2006 22:46:38 -0000 Subject: [Bug 57502] Re: JMicron PATA/SATA Controller does not work References: <20060823192235.13463.13121.malonedeb@gandwana.ubuntu.com> Message-ID: <20060921224638.23036.10330.malone@gangotri.ubuntu.com> sargosis, that's not completely true: C2D is capable of doing 64bits but unlike Itanium it also supports 32bit, Core 2 Duo is an "extended" Core Duo with EM64T + pni + SSE4 ideally the 32bit or 64bit versions should do equally fine on these systems ... btw: Ben Collins, keep up the good work! I've tried a ton of new kernels with this controller JMicron PATA (I have 2 ide-harddrives connected to it) on my Asus P5W DH so far the only working kernels for me were: 2.6.18-rc4-mm1 2.6.18-rc4-mm2 2.6.17-emission8 works for me, too http://forums.gentoo.org/viewtopic-p-3555200.html#3555200 => thank to this patch: http://distfiles.evolution-mission.org/sources/2.6.17/emission8/broken-out/031-jmicron-ide-2.6.17.patch the controller also works with 2.6.17 all kernels below them don't work for me the same applies for the newer kernels (don't "really" work): the kernels takes approx. 9 minutes to bring the controller / hdds up or just gives a message: qc timeout (cmd 0xec) failed to IDENTIFY (I/O) error, err_mask = 0x4) (2.6.18-rc6-mm1 / 2.6.18-rc6), this unfortunately also depends on Bios settings I both tried libata (only libata) and ide but both show the same behavior ... <== I hope this helps you a little & that you can find out the changes (& bad code ;-) ) which were made between those kernels to get a patched & working kernel if you have a system with that chipset you can try it out: http://forums.gentoo.org/viewtopic-p-3548439.html#3548439 a livecd which is based on 2.6.18-rc4-mm1 -- JMicron PATA/SATA Controller does not work https://launchpad.net/bugs/57502 From gpothier at gmail.com Fri Sep 22 02:22:46 2006 From: gpothier at gmail.com (gpothier) Date: Fri, 22 Sep 2006 02:22:46 -0000 Subject: [Bug 41015] Re: [ALSA] Master volume control doesn't control Headphone control References: <20060424004108.4110.947.malonedeb@gangotri.ubuntu.com> Message-ID: <20060922022246.23105.53004.malone@gangotri.ubuntu.com> I had a similar problem on a Dell Latitude D810 and the hp_mute_led option fixed it. This is with Edgy using 2.6.17-8-generic. Output of lspci -nv attached. ** Attachment added: "Output of lspci -nv" http://librarian.launchpad.net/4392008/41015.lspci -- [ALSA] Master volume control doesn't control Headphone control https://launchpad.net/bugs/41015 From frohro at wwc.edu Fri Sep 22 04:36:48 2006 From: frohro at wwc.edu (Rob Frohne) Date: Fri, 22 Sep 2006 04:36:48 -0000 Subject: [Bug 37291] Re: NETDEV_TX_BUSY returned when (re)loading driver References: <20060330075920.6253.48234.malonedeb@gandwana.ubuntu.com> Message-ID: <20060922043648.23105.1325.malone@gangotri.ubuntu.com> I get the same thing here. It also happens when I try to suspend my Dell D600 laptop the second time, or when I try to hibernate it as well the second time. It seems to keep the tasks from quitting, so the suspend doesn't happen. I am using kernel vmlinuz-2.6.15-27-686. Thanks for working on this! Rob -- NETDEV_TX_BUSY returned when (re)loading driver https://launchpad.net/bugs/37291 From h.wenner at online.de Fri Sep 22 07:14:14 2006 From: h.wenner at online.de (Holger H. Wenner) Date: Fri, 22 Sep 2006 07:14:14 -0000 Subject: [Bug 39414] Re: syslog is flooded with messages after connecting bluetooth usb dongle References: <20060413092856.13165.25179.malonedeb@gandwana.ubuntu.com> Message-ID: <20060922071414.17606.17171.malone@gandwana.ubuntu.com> I´m having the same problem. My system: 2.6.15-27-386 lsusb: Bus 001 Device 002: ID 0846:4240 NetGear, Inc. WG111 WiFi (v2) Bus 001 Device 001: ID 0000:0000 Bus 002 Device 005: ID 0400:080a National Semiconductor Corp. Bus 002 Device 004: ID 03f0:7204 Hewlett-Packard DeskJet 36xx Bus 002 Device 003: ID 0c45:2060 Microdia Bus 002 Device 002: ID 04b4:6560 Cypress Semiconductor Corp. CY7C65640 USB-2.0 "TetraHub"Bus 002 Device 001: ID 0000:0000 -- syslog is flooded with messages after connecting bluetooth usb dongle https://launchpad.net/bugs/39414 From bernado_tornado at gmx.de Fri Sep 22 07:24:23 2006 From: bernado_tornado at gmx.de (=?utf-8?q?=22Kosmonaut=22_Bernd_M=C3=BCller?=) Date: Fri, 22 Sep 2006 07:24:23 -0000 Subject: =?utf-8?q?=5BBug_53813=5D_Re=3A_kernel_doesn=C2=B4t_support_Sony_d?= =?utf-8?q?sc-w5_anymore?= References: <20060723110756.11169.28683.malonedeb@gandwana.ubuntu.com> Message-ID: <20060922072423.23105.4940.malone@gangotri.ubuntu.com> Hi there! Just wanted to report, that kernel 2.6.15.27 has solved my problems with my Sony dsc. Everything workes fine again. :-D ** Summary changed: - kernel doesn´t support Sony dsc-w5 anymore + (Solved)kernel doesn´t support Sony dsc-w5 anymore -- (Solved)kernel doesn´t support Sony dsc-w5 anymore https://launchpad.net/bugs/53813 From iacobcatalin at gmail.com Fri Sep 22 08:56:59 2006 From: iacobcatalin at gmail.com (Catalin Iacob) Date: Fri, 22 Sep 2006 08:56:59 -0000 Subject: [Bug 43745] Re: Ubuntu corrupts real time clock on some dell laptops References: <20060509053346.20684.57755.malonedeb@gangotri.ubuntu.com> Message-ID: <20060922085659.17562.72727.malone@gandwana.ubuntu.com> Hello I've searched the web for this problem and here is an idea I found. It makes sense so I'm thinking it might be the answer to what causes the bug. This is why I post it here so that Ben Collins can check it out: "Just on of those late night thoughts as I reread some of this. What if the problem is that Linux somehow uses access to the CMOS in a way that tends to draw down the battery? That would make having a new, fresh battery (well connected) a critical item, and would explain why some posters (your name) have problems that come back "after a few days" (battery more used or in a colder enviornment??) and why there are so many 6400s out there with no such problem and why those with the problem seem to be unable to predict when it will happen or not." Also, has anyone tried the rtc-resume.c? Good luck solving the bug. As soon as it's fixed I might reconsider and buy a Dell laptop. Otherwise not since I can't live without Ubuntu :-) -- Ubuntu corrupts real time clock on some dell laptops https://launchpad.net/bugs/43745 From k at ailis.de Fri Sep 22 09:20:56 2006 From: k at ailis.de (Klaus Reimer) Date: Fri, 22 Sep 2006 09:20:56 -0000 Subject: [Bug 43745] Re: Ubuntu corrupts real time clock on some dell laptops References: <20060509053346.20684.57755.malonedeb@gangotri.ubuntu.com> Message-ID: <20060922092056.17562.93577.malone@gandwana.ubuntu.com> > access to the CMOS in a way that tends to draw down the battery? This sounds wrong. Whenever I had this problem with the CMOS clock I just removed the CMOS battery for about 30 seconds and reinserted the same battery and everything was working again. So the battery was not empty and I never replaced it with a new battery. I'm still pretty sure the kernel just sometimes corrupts somehow something in the BIOS (A very exact explanation, isn't it? ;-). Removing and re-inserting the battery just causes the BIOS to reset properly so everything works again. And it must be the kernel which corrupts the BIOS and no other appliations because I can reproduce the problem by just starting the kernel again and again with the option init=/sbin/reboot. So in my opinion fiddling around with the /etc/init.d/hwclock stuff is not a solution. -- Ubuntu corrupts real time clock on some dell laptops https://launchpad.net/bugs/43745 From k at ailis.de Fri Sep 22 09:22:59 2006 From: k at ailis.de (Klaus Reimer) Date: Fri, 22 Sep 2006 09:22:59 -0000 Subject: [Bug 43745] Re: Ubuntu corrupts real time clock on some dell laptops References: <20060509053346.20684.57755.malonedeb@gangotri.ubuntu.com> Message-ID: <20060922092300.23036.92205.malone@gangotri.ubuntu.com> Sorry, I have to correct me: It's not "can reproduce the problem". It must be "could reproduce the problem". I no longer use the Latitude D820 because of this bug so I'm not able to try out if it's still reproducable with current kernels. -- Ubuntu corrupts real time clock on some dell laptops https://launchpad.net/bugs/43745 From launchpad.20.wackelzahn at spamgourmet.com Fri Sep 22 10:26:27 2006 From: launchpad.20.wackelzahn at spamgourmet.com (arne steffens) Date: Fri, 22 Sep 2006 10:26:27 -0000 Subject: [Bug 57502] Re: JMicron PATA/SATA Controller does not work References: <20060823192235.13463.13121.malonedeb@gandwana.ubuntu.com> Message-ID: <20060922102629.23036.19881.malone@gangotri.ubuntu.com> the build of 22nd does not work for me How can I be of further assistance in finding the bug? -- JMicron PATA/SATA Controller does not work https://launchpad.net/bugs/57502 From cimmo at libero.it Fri Sep 22 10:26:02 2006 From: cimmo at libero.it (Cimmo) Date: Fri, 22 Sep 2006 10:26:02 -0000 Subject: [Bug 50665] Re: after dapper upgrade to 2.6.15-25 usb mass storage aren't mounted well References: <20060622111741.29464.53113.malonedeb@gandwana.ubuntu.com> Message-ID: <20060922102602.17562.63310.malone@gandwana.ubuntu.com> seems fixed in kernel 2.6.15-26 and -27 ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Unconfirmed => Fix Released -- after dapper upgrade to 2.6.15-25 usb mass storage aren't mounted well https://launchpad.net/bugs/50665 From fisakov at gmail.com Fri Sep 22 10:54:27 2006 From: fisakov at gmail.com (Fedor Isakov) Date: Fri, 22 Sep 2006 10:54:27 -0000 Subject: [Bug 52649] Re: VIA IRQ quirk changes in 2.6.15-26.44 have broken various VIA devices References: <20060711150321.27257.34756.malonedeb@gangotri.ubuntu.com> Message-ID: <20060922105427.23036.23661.malone@gangotri.ubuntu.com> Sorry, mistakenly added unrelated package as affected by this bug, trying to get rid of it... doesn't work. ** Changed in: flashplugin-nonfree (Ubuntu) Sourcepackagename: flashplugin-nonfree => None ** Changed in: Ubuntu Status: Unconfirmed => Rejected -- VIA IRQ quirk changes in 2.6.15-26.44 have broken various VIA devices https://launchpad.net/bugs/52649 From ubuntu-launchpad at theplayboymansion.net Fri Sep 22 11:21:42 2006 From: ubuntu-launchpad at theplayboymansion.net (ph8) Date: Fri, 22 Sep 2006 11:21:42 -0000 Subject: [Bug 57502] Re: JMicron PATA/SATA Controller does not work References: <20060823192235.13463.13121.malonedeb@gandwana.ubuntu.com> Message-ID: <20060922112142.17606.63307.malone@gandwana.ubuntu.com> According to the package list for the install CD the kernel of the 22nd is the same as the one of the 21st! I don't know what's gone on there, grrrrrrrrrrrr... -- JMicron PATA/SATA Controller does not work https://launchpad.net/bugs/57502 From nosefish at gmx.net Fri Sep 22 11:29:14 2006 From: nosefish at gmx.net (Stefan Steinheimer) Date: Fri, 22 Sep 2006 11:29:14 -0000 Subject: [Bug 57502] Re: JMicron PATA/SATA Controller does not work References: <20060823192235.13463.13121.malonedeb@gandwana.ubuntu.com> Message-ID: <20060922112914.17562.59275.malone@gandwana.ubuntu.com> The kernel on today's (2006-9-22) daily iso is version 2.6.17-7.20 from Sept. 18, not the fixed 2.6.17-9.23, so it's not to be expected to work. -- JMicron PATA/SATA Controller does not work https://launchpad.net/bugs/57502 From torsten.hilbrich at gmx.net Fri Sep 22 11:46:53 2006 From: torsten.hilbrich at gmx.net (Torsten Hilbrich) Date: Fri, 22 Sep 2006 11:46:53 -0000 Subject: [Bug 48442] Re: REVERSION: previously working USB sync fails. References: <20060605011645.4978.15253.malonedeb@gandwana.ubuntu.com> Message-ID: <20060922114653.17562.74262.malone@gandwana.ubuntu.com> I can confirm this problem, within pilot-xfer the problems occurs in the isatty function and is reported to the user-space as segmentation fault. It happens with all 2.6.15-kernels for the 686 architecture and is solved with the 2.6.17 kernel available in unstable release. -- REVERSION: previously working USB sync fails. https://launchpad.net/bugs/48442 From ilcorsaronero at gmail.com Fri Sep 22 12:33:15 2006 From: ilcorsaronero at gmail.com ('ntoni) Date: Fri, 22 Sep 2006 12:33:15 -0000 Subject: [Bug 34831] Re: Hardlock of entire system (Dapper Flight 5) References: <20060314003317.30057.9117.malonedeb@gandwana.ubuntu.com> Message-ID: <20060922123316.23036.86417.malone@gangotri.ubuntu.com> Tried out, but didn't work. Something unexpected happened, but this shouldn't be a problem: the rmmod command gave me a memory leak error. Then the various modprobe commands worked as expected, rosegarden keeps on crashing everything. I have a SB Live! 5.1. Player soundcard, I don't think it's the value one since it has a (useful) gamepad port and 6 channels output. Could you please tell me which kernel are you using, and what's your alsa's version? Mine is: scrapthesurface at ubuntu:~$ uname -r 2.6.15-27-k7 scrapthesurface at ubuntu:~$ cat /proc/asound/version Advanced Linux Sound Architecture Driver Version 1.0.10rc3 (Mon Nov 07 13:30:21 2005 UTC). Thanks -- Hardlock of entire system (Dapper Flight 5) https://launchpad.net/bugs/34831 From manuellopezibanez at yahoo.es Fri Sep 22 13:12:42 2006 From: manuellopezibanez at yahoo.es (manu) Date: Fri, 22 Sep 2006 13:12:42 -0000 Subject: [Bug 23445] Re: iMac G5 will freeze after booting up References: <20060113142343.21012.90472.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060922131242.23036.63681.launchpad@gangotri.ubuntu.com> ** Bug 58066 has been marked a duplicate of this bug -- iMac G5 will freeze after booting up https://launchpad.net/bugs/23445 From manuellopezibanez at yahoo.es Fri Sep 22 13:12:42 2006 From: manuellopezibanez at yahoo.es (manu) Date: Fri, 22 Sep 2006 13:12:42 -0000 Subject: [Bug 58066] Re: On the iMac G5 (PPC64) dapper freezes before being able to fully boot References: <20060829031455.17097.64499.malonedeb@gangotri.ubuntu.com> Message-ID: <20060922131242.23036.44342.launchpad@gangotri.ubuntu.com> *** This bug is a duplicate of bug 23445 *** ** This bug has been marked a duplicate of bug 23445 iMac G5 will freeze after booting up ** Tags removed: 2 ** Tags removed: g5 macintosh ** Tags removed: imac rev -- On the iMac G5 (PPC64) dapper freezes before being able to fully boot https://launchpad.net/bugs/58066 From kungfoobar at gmail.com Fri Sep 22 13:25:58 2006 From: kungfoobar at gmail.com (Alberto Torres) Date: Fri, 22 Sep 2006 13:25:58 -0000 Subject: [Bug 34831] Re: Hardlock of entire system (Dapper Flight 5) References: <20060314003317.30057.9117.malonedeb@gandwana.ubuntu.com> Message-ID: <20060922132558.23105.96142.malone@gangotri.ubuntu.com> Hey, I've just noted that my workarounds DOESN'T work when I open Rosegarden FIRST. Use my workarounds, start jack (qjackctl), open qsynth or zynaddsubfx, and THEN open rosegarden. Tell me if it works. My kernel is 2.6.15-26-k7 and alsa is same as yours. -- Hardlock of entire system (Dapper Flight 5) https://launchpad.net/bugs/34831 From susancragin at earthlink.net Fri Sep 22 14:11:48 2006 From: susancragin at earthlink.net (susancragin) Date: Fri, 22 Sep 2006 14:11:48 -0000 Subject: [Bug 38263] Re: [Bug 38263] Re: freeze at startup References: <20060405194706.24486.46138.malonedeb@gangotri.ubuntu.com> <20060921170903.23036.11742.malone@gangotri.ubuntu.com> Message-ID: <4513EF24.9070602@earthlink.net> Guessed wrong. I have the latest edgy, and it was NOT fixed until yesterday. Now it is patch-fixed somehow, but Edgy gets stuck and loads VERY VERY slowly. I am in a library computer far from home as I read this, but will send bug reports this evening. Susan Cragin -- freeze at startup https://launchpad.net/bugs/38263 From philipwyett at blueyonder.co.uk Fri Sep 22 14:15:51 2006 From: philipwyett at blueyonder.co.uk (Philip Wyett) Date: Fri, 22 Sep 2006 14:15:51 -0000 Subject: [Bug 50588] Re: Slow boot time since update to kernel 2.6.15-25-686 References: <20060621173616.23311.67847.malonedeb@gangotri.ubuntu.com> Message-ID: <20060922141551.23036.17848.malone@gangotri.ubuntu.com> Running of the latest 686 kernel has resolved all issue, all except the slow root mount at boot. On the 386 kernel it is a couple of seconds and on the 686 kernel it is 15 - 20 seconds. -- Slow boot time since update to kernel 2.6.15-25-686 https://launchpad.net/bugs/50588 From rcryderman at gmail.com Fri Sep 22 17:18:14 2006 From: rcryderman at gmail.com (moonbeam) Date: Fri, 22 Sep 2006 17:18:14 -0000 Subject: [Bug 61911] Kernel upgrades in edgy trash kernel boot options for system with root partition running on top of LVM References: <20060922171815.23036.47622.malonedeb@gangotri.ubuntu.com> Message-ID: <20060922171815.23036.47622.malonedeb@gangotri.ubuntu.com> Public bug reported: Binary package hint: linux-generic Edgy LVM with a root partition running on a volume group. The only partition not on top of LVM is the boot partition which is ext3. Root partition is reiserfs. This has been occurring for a while and I have just been fixing it each time it appears but is seemingly not getting corrected at the source so... -------------------------- Any kernel upgrades trash menu.lst file. Existing and new kernel entries are configured/reconfigured by the package install in the following manner. kernel /vmlinuz-2.6.17-6-686 root=UUID=48764611-93ca-4588-98cf- 30de9507ad30 ro quiet splash This causes the boot process to stall. It's either necessary to catch the kernel upgrades when they occur and correct before a reboot or edit the boot options in grub and fix afterwards. The kernel option lines needs to be of the following form in my configuration to successfully boot. kernel /vmlinuz-2.6.17-8-generic root=/dev/mapper/Ubuntu-root ro quiet splash And I wish the kernel package would leave it that way :-) I am not sure if this is related to this system having been upgraded from dapper (and possible breezy before that) but kernel upgrades are rather impolite on this system. I suspect it might be possible to configure this behaviour using the automagic options in menu.lst but it might still be a nasty surprise for someone the first time this occurs. ** Affects: linux-meta (Ubuntu) Importance: Untriaged Status: Unconfirmed -- Kernel upgrades in edgy trash kernel boot options for system with root partition running on top of LVM https://launchpad.net/bugs/61911 From cinchurge at gmail.com Fri Sep 22 17:15:09 2006 From: cinchurge at gmail.com (cinchurge) Date: Fri, 22 Sep 2006 17:15:09 -0000 Subject: [Bug 12483] Re: laptop-mode/IDE-APM hang on various laptops References: <20060113132548.21012.74332.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060922171509.17606.89759.malone@gandwana.ubuntu.com> I seem to have a similar problem on my ThinkPad X31. I installed Dapper (kernel 2.6.15-26) about 2 weeks ago and everything worked well except after suspending to ram, I/O error would occur with one of the mounted HD partitions, and rebooting would cause the system to hang completely with the HD light illuminated - all I could do at that point was turn off the power. Disabling laptop-mode by setting ENABLE_LAPTOP_MODE="no" in /etc/default/laptop-mode hasn't solved the problem. -- laptop-mode/IDE-APM hang on various laptops https://launchpad.net/bugs/12483 From nafallo at magicalforest.se Fri Sep 22 17:34:21 2006 From: nafallo at magicalforest.se (=?utf-8?q?Christian_Bj=C3=A4levik?=) Date: Fri, 22 Sep 2006 17:34:21 -0000 Subject: [Bug 61911] Re: Kernel upgrades in edgy trash kernel boot options for system with root partition running on top of LVM References: <20060922171815.23036.47622.malonedeb@gangotri.ubuntu.com> Message-ID: <20060922173421.23036.13725.malone@gangotri.ubuntu.com> Could you try upgrading to current lvm-common please? -- Kernel upgrades in edgy trash kernel boot options for system with root partition running on top of LVM https://launchpad.net/bugs/61911 From rcryderman at gmail.com Fri Sep 22 17:44:30 2006 From: rcryderman at gmail.com (moonbeam) Date: Fri, 22 Sep 2006 17:44:30 -0000 Subject: [Bug 61911] Re: [Bug 61911] Re: Kernel upgrades in edgy trash kernel boot options for system with root partition running on top of LVM References: <20060922171815.23036.47622.malonedeb@gangotri.ubuntu.com> <20060922173421.23036.13725.malone@gangotri.ubuntu.com> Message-ID: apt-get indicates I have the newest version. root at MrPiddles:/home/moonbeam# lvm version LVM version: 2.02.06 (2006-05-12) Library version: 1.02.07 (2006-05-11) Driver version: 4.6.0 On 9/22/06, Christian Bjälevik wrote: > > Could you try upgrading to current lvm-common please? > > -- > Kernel upgrades in edgy trash kernel boot options for system with root > partition running on top of LVM > https://launchpad.net/bugs/61911 > -- Kernel upgrades in edgy trash kernel boot options for system with root partition running on top of LVM https://launchpad.net/bugs/61911 From michael at hammill.name Fri Sep 22 18:13:09 2006 From: michael at hammill.name (Mike) Date: Fri, 22 Sep 2006 18:13:09 -0000 Subject: [Bug 50813] Re: 2.6.15-xx ppc kernel fails to boot on G4 References: <20060623192715.23397.36478.malonedeb@gangotri.ubuntu.com> Message-ID: <20060922181309.17606.46131.malone@gandwana.ubuntu.com> Well, it took some time to get those Ubuntu official CDs. I get the exact same error (non-booting Kernel) on both a G4 (which is running Ubuntu 6.06 with an old 2.6.12-10-powerpc Ubuntu Kernel) and a G3 (B&W) which is running Ubuntu server (2.6.12-10-powerpc Ubuntu Kernel) when I boot up with the official CDs and the default Kernel. While waiting for those official CDs, I have tried the interim Kernels provided by 6.06, namely: vmlinux-2.6.15-26-powerpc vmlinux-2.6.15-27-powerpc (possibly others, but those are the only ones still around under /boot), but it's the same story. It's a pain to try these then have to boot off an old Ubuntu CD to point vmlinux.old and initrd.img.old to my old 2.6.12-10-powerpc kernel. I find it totally remarkable that no one else has encountered this. I have a similar B&W G3 running FC5 Kernel 2.6.17-1.2157_FC5, and a similar G4 running Gentoo Kernel 2.6.17-gentoo-r4 so I know the kernel is not "beyond" the hardware. I tried using "Linux debug" with the Ubuntu Official CDs when letting it take the default didn't work, but that didn't make any difference. Is there some way to get more information to figure out what is going on? Hope you can shead some light. I really like Ubuntu, and would like to keep using it. Best regards, Mike Hammill -- 2.6.15-xx ppc kernel fails to boot on G4 https://launchpad.net/bugs/50813 From nafallo at magicalforest.se Fri Sep 22 18:56:25 2006 From: nafallo at magicalforest.se (=?utf-8?q?Christian_Bj=C3=A4levik?=) Date: Fri, 22 Sep 2006 18:56:25 -0000 Subject: [Bug 61911] Re: Kernel upgrades in edgy trash kernel boot options for system with root partition running on top of LVM References: <20060922171815.23036.47622.malonedeb@gangotri.ubuntu.com> Message-ID: <20060922185625.23036.11878.malone@gangotri.ubuntu.com> "apt-cache policy lvm-common" should say that 1.5.20ubuntu6 is installed. Can you confirm this? :-) -- Kernel upgrades in edgy trash kernel boot options for system with root partition running on top of LVM https://launchpad.net/bugs/61911 From rcryderman at gmail.com Fri Sep 22 19:23:27 2006 From: rcryderman at gmail.com (moonbeam) Date: Fri, 22 Sep 2006 19:23:27 -0000 Subject: [Bug 61911] Re: [Bug 61911] Re: Kernel upgrades in edgy trash kernel boot options for system with root partition running on top of LVM References: <20060922171815.23036.47622.malonedeb@gangotri.ubuntu.com> <20060922185625.23036.11878.malone@gangotri.ubuntu.com> Message-ID: No. It's showing 1.5.20ubuntu5. root at MrPiddles:/home/moonbeam# apt-cache policy lvm-common lvm-common: Installed: 1.5.20ubuntu5 Candidate: 1.5.20ubuntu5 Version table: *** 1.5.20ubuntu5 0 500 http://ca.archive.ubuntu.com edgy/main Packages 100 /var/lib/dpkg/status AFTER doing a apt-get update. I'm seeing... root at MrPiddles:/home/moonbeam# apt-cache policy lvm-common lvm-common: Installed: 1.5.20ubuntu5 Candidate: 1.5.20ubuntu6 Version table: 1.5.20ubuntu6 0 500 http://ca.archive.ubuntu.com edgy/main Packages *** 1.5.20ubuntu5 0 100 /var/lib/dpkg/status I'm going to go ahead and install the new lvm-common and then remove/reinstall the newest kernel and see if it still behaves the same or not. I might get a chance before I head out - got to go pick up a few things. -- Kernel upgrades in edgy trash kernel boot options for system with root partition running on top of LVM https://launchpad.net/bugs/61911 From sargosis at gmail.com Fri Sep 22 19:39:26 2006 From: sargosis at gmail.com (sargosis) Date: Fri, 22 Sep 2006 19:39:26 -0000 Subject: [Bug 57502] Re: JMicron PATA/SATA Controller does not work References: <20060823192235.13463.13121.malonedeb@gandwana.ubuntu.com> Message-ID: <20060922193927.17606.43390.malone@gandwana.ubuntu.com> So has the problem been fixed and we're all waiting for it to be released, or is it still being fixed? -- JMicron PATA/SATA Controller does not work https://launchpad.net/bugs/57502 From ivoks at grad.hr Fri Sep 22 19:56:02 2006 From: ivoks at grad.hr (=?utf-8?q?Ante_Karamati=C4=87?=) Date: Fri, 22 Sep 2006 19:56:02 -0000 Subject: [Bug 57502] Re: [Bug 57502] Re: JMicron PATA/SATA Controller does not work References: <20060823192235.13463.13121.malonedeb@gandwana.ubuntu.com> <20060922193927.17606.43390.malone@gandwana.ubuntu.com> Message-ID: <1158954962.27451.8.camel@i8600.gfr.local> Na Pet, 2006-09-22 u 19:39 +0000, sargosis je napisao: > So has the problem been fixed and we're all waiting for it to be > released, or is it still being fixed? It's fixed in Edgy, but there is still no install CD that includes that fix. It will be, tomorrow around 8AM CET. -- Ante Karamatić PGP: 0xD3BDA225 -- JMicron PATA/SATA Controller does not work https://launchpad.net/bugs/57502 From bart at samwel.tk Fri Sep 22 20:04:40 2006 From: bart at samwel.tk (Bart Samwel) Date: Fri, 22 Sep 2006 20:04:40 -0000 Subject: [Bug 12483] Re: [Bug 12483] Re: laptop-mode/IDE-APM hang on various laptops References: <20060113132548.21012.74332.launchpad@macquarie.warthogs.hbd.com> <20060922171509.17606.89759.malone@gandwana.ubuntu.com> Message-ID: <451441D8.9050401@samwel.tk> cinchurge wrote: > I seem to have a similar problem on my ThinkPad X31. I installed Dapper > (kernel 2.6.15-26) about 2 weeks ago and everything worked well except > after suspending to ram, I/O error would occur with one of the mounted > HD partitions, and rebooting would cause the system to hang completely > with the HD light illuminated - all I could do at that point was turn > off the power. Disabling laptop-mode by setting ENABLE_LAPTOP_MODE="no" > in /etc/default/laptop-mode hasn't solved the problem. Hmmm, this may be unrelated if disabling laptop mode doesn't make it go away. Especially since there's suspending involved, which there isn't in the other reports. -- laptop-mode/IDE-APM hang on various laptops https://launchpad.net/bugs/12483 From rcryderman at gmail.com Fri Sep 22 20:30:51 2006 From: rcryderman at gmail.com (moonbeam) Date: Fri, 22 Sep 2006 20:30:51 -0000 Subject: [Bug 61911] Re: [Bug 61911] Re: Kernel upgrades in edgy trash kernel boot options for system with root partition running on top of LVM References: <20060922171815.23036.47622.malonedeb@gangotri.ubuntu.com> <20060922185625.23036.11878.malone@gangotri.ubuntu.com> Message-ID: Removed 2.6.17* kernels Fixed up menu.lst to use /dev/mapper/Ubuntu-root Installed 2.6.17-8-generic menu.lst still being modified in the same manner. Left it that way and rebooted. Stalled during boot again. So the same thing appears to still be happening. -- Kernel upgrades in edgy trash kernel boot options for system with root partition running on top of LVM https://launchpad.net/bugs/61911 From ben.collins at ubuntu.com Fri Sep 22 20:31:24 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Fri, 22 Sep 2006 20:31:24 -0000 Subject: [Bug 36014] Re: kernel can't scale cpu frequency References: <20060322140248.30471.37870.malonedeb@gangotri.ubuntu.com> Message-ID: <20060922203124.23105.34501.launchpad@gangotri.ubuntu.com> ** Changed in: linux-source-2.6.17 (Ubuntu) Status: Fix Committed => Confirmed -- kernel can't scale cpu frequency https://launchpad.net/bugs/36014 From sargosis at gmail.com Fri Sep 22 22:41:53 2006 From: sargosis at gmail.com (sargosis) Date: Fri, 22 Sep 2006 22:41:53 -0000 Subject: [Bug 57502] Re: JMicron PATA/SATA Controller does not work References: <20060823192235.13463.13121.malonedeb@gandwana.ubuntu.com> Message-ID: <20060922224153.17562.74737.malone@gandwana.ubuntu.com> Thank you, Ante. And for those of us who are new to the linux community, where will we be able to pick up that install CD? If you could, please provide a link. Thank you. -- JMicron PATA/SATA Controller does not work https://launchpad.net/bugs/57502 From odd.haugland at hjemme.no Fri Sep 22 22:59:15 2006 From: odd.haugland at hjemme.no (odd haugland) Date: Fri, 22 Sep 2006 22:59:15 -0000 Subject: [Bug 61557] Re: Installer crashed References: <20060921002619.17606.74342.malonedeb@gandwana.ubuntu.com> Message-ID: <20060922225915.17606.47312.launchpad@gandwana.ubuntu.com> ** Description changed: raceback (most recent call last): File "/usr/bin/ubiquity", line 130, in ? install(sys.argv[1]) File "/usr/bin/ubiquity", line 55, in install ret = wizard.run() - File "/usr/lib/python2.4/site-packages/ubiquity/frontend/gtkui.py", line 266, in run - self.process_step() - File "/usr/lib/python2.4/site-packages/ubiquity/frontend/gtkui.py", line 741, in process_step - self.mountpoints_to_summary() - File "/usr/lib/python2.4/site-packages/ubiquity/frontend/gtkui.py", line 1029, in mountpoints_to_summary + File "/usr/lib/python2.4/site-packages/ubiquity/frontend/gtkui.py", line 264, in run self.progress_loop() - File "/usr/lib/python2.4/site-packages/ubiquity/frontend/gtkui.py", line 538, in progress_loop + File "/usr/lib/python2.4/site-packages/ubiquity/frontend/gtkui.py", line 538, in process_loop raise RuntimeError, ("Install failed with exit code %s; see " - RuntimeError: Install failed with exit code -11; see /var/log/installer/syslog and /var/log/syslog + RuntimeError: Install failed with exit code1; see /var/log/installer/syslog and /var/log/syslog + + i will try once more + + odd -- Installer crashed https://launchpad.net/bugs/61557 From martin.sam at gmail.com Fri Sep 22 23:18:36 2006 From: martin.sam at gmail.com (MARTIN Samuel) Date: Fri, 22 Sep 2006 23:18:36 -0000 Subject: [Bug 42600] Re: Microphone does not work on Dell Inspiron 630m References: <20060502153431.16712.10593.malonedeb@gandwana.ubuntu.com> Message-ID: <20060922231836.17562.19591.malone@gandwana.ubuntu.com> I have a Dell inspiron 630m + Ubuntu Dapper, and I have the same problem. I don't have sound with mic imput. There isn't the 20db amplification in sound configuration. Mic input is completely mute. It is a small lie, If I shout very extremely in mic at the same time as the reading music, I can hear 0,5% of my voice. I wish a fix bug in ubuntu edgy Sam [french] -- Microphone does not work on Dell Inspiron 630m https://launchpad.net/bugs/42600 From sune at molgaard.org Fri Sep 22 23:25:11 2006 From: sune at molgaard.org (Fjodor) Date: Fri, 22 Sep 2006 23:25:11 -0000 Subject: [Bug 36014] Re: kernel can't scale cpu frequency References: <20060322140248.30471.37870.malonedeb@gangotri.ubuntu.com> Message-ID: <20060922232511.17606.3195.malone@gandwana.ubuntu.com> I understand that you are fishing for resolution by acpi updates, but I would like to point out that my /proc/acpi/processor/CPU0/throttling lists state count: 8 active state: T0 states: *T0: 00% T1: 12% T2: 25% T3: 37% T4: 50% T5: 62% T6: 75% T7: 87% But still: sune at tommelise:~$ sudo /etc/init.d/powernowd restart Password: * Stopping powernowd: [ ok ] * Starting powernowd... /etc/init.d/powernowd: line 83: /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor: No such file or directory * CPU frequency scaling not supported [ ok ] sune at tommelise:~$ And sune at tommelise:~$ sudo modprobe speedstep-centrino FATAL: Error inserting speedstep_centrino (/lib/modules/2.6.17.11-ubuntu1-pentium4m-7/kernel/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.ko): No such devicesune at tommelise:~$ /Fjodor -- kernel can't scale cpu frequency https://launchpad.net/bugs/36014 From sune at molgaard.org Fri Sep 22 23:26:23 2006 From: sune at molgaard.org (Fjodor) Date: Fri, 22 Sep 2006 23:26:23 -0000 Subject: [Bug 36014] Re: kernel can't scale cpu frequency References: <20060322140248.30471.37870.malonedeb@gangotri.ubuntu.com> Message-ID: <20060922232623.23036.2179.malone@gangotri.ubuntu.com> Sorry, didn't see the "Don't paste into comments". -5 karma points to me :-( -- kernel can't scale cpu frequency https://launchpad.net/bugs/36014 From constantine at evanslabs.org Fri Sep 22 19:38:32 2006 From: constantine at evanslabs.org (Constantine Evans) Date: Fri, 22 Sep 2006 19:38:32 -0000 Subject: [Bug 36014] Re: [Bug 36014] Re: kernel can't scale cpu frequency References: <20060322140248.30471.37870.malonedeb@gangotri.ubuntu.com> <20060922232511.17606.3195.malone@gandwana.ubuntu.com> Message-ID: <45143BB8.4050805@evanslabs.org> -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Fjodor, the issue that you are having is not related to this bug. Please file a new bug report about it if you can't find a relevant one. That said, I think you need to ask on the forums or the mailing list, since it doesn't appear you are experiencing a bug. Throttling is not the same as scaling. Your computer most likely does not support Intel's Speedstep, and needs some other module to be loaded. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.3 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFFFDu4aejd/sU2TVARAnhvAJoDHbdMmYa2TQb5AyuwMps+iq5e5wCfTjtj RT+0kyhbUfDbuCtLzjd1PvY= =3+D9 -----END PGP SIGNATURE----- -- kernel can't scale cpu frequency https://launchpad.net/bugs/36014 From mzilhao at sapo.pt Sat Sep 23 00:36:14 2006 From: mzilhao at sapo.pt (Miguel) Date: Sat, 23 Sep 2006 00:36:14 -0000 Subject: [Bug 44805] Re: "critical temperature reached" with kernel 2.6.15-22-386 References: <20060515103402.15848.98592.malonedeb@gangotri.ubuntu.com> Message-ID: <20060923003614.23036.66908.malone@gangotri.ubuntu.com> using edgy knot 3 desktop cd: - i was able to boot the first time i tried, i even played a few games, but the fans would sometimes start working at full speed during a few seconds for no apparent reason. the computer eventually froze... - the second time the keyboard didn't work, i tried shutting down and i got a black screen with the messages: Critical temperature reached (-46009 C), shutting down Critical temperature reached (--5561 C), shutting down Critical temperature reached (57 C), shutting down Critical temperature reached (57 C), shutting down and it just froze there... - i tried a few more times, in some of them the computer froze in the middle of the booting process - it worked just fine with the boot option pci=noacpi -- "critical temperature reached" with kernel 2.6.15-22-386 https://launchpad.net/bugs/44805 From launchpad.20.wackelzahn at spamgourmet.com Sat Sep 23 01:45:46 2006 From: launchpad.20.wackelzahn at spamgourmet.com (arne steffens) Date: Sat, 23 Sep 2006 01:45:46 -0000 Subject: [Bug 57502] Re: JMicron PATA/SATA Controller does not work References: <20060823192235.13463.13121.malonedeb@gandwana.ubuntu.com> Message-ID: <20060923014546.23036.73207.malone@gangotri.ubuntu.com> daily builds can be found here: http://cdimage.ubuntu.com/daily/current/ please note that they're not final releases but experimental builds sorry for off-topic *shrugs* -- JMicron PATA/SATA Controller does not work https://launchpad.net/bugs/57502 From ivoks at grad.hr Sat Sep 23 08:05:45 2006 From: ivoks at grad.hr (=?utf-8?q?Ante_Karamati=C4=87?=) Date: Sat, 23 Sep 2006 08:05:45 -0000 Subject: [Bug 57502] Re: JMicron PATA/SATA Controller does not work References: <20060823192235.13463.13121.malonedeb@gandwana.ubuntu.com> Message-ID: <20060923080545.23105.59537.malone@gangotri.ubuntu.com> Don't download latest iso. It still contains old kernel. OTOH, new kernel didn't do the trick for me. Kernel that works for me is 2.6.18-rc7-mm, I hope other will have better luck. -- JMicron PATA/SATA Controller does not work https://launchpad.net/bugs/57502 From ubuntu-launchpad at theplayboymansion.net Sat Sep 23 09:55:16 2006 From: ubuntu-launchpad at theplayboymansion.net (ph8) Date: Sat, 23 Sep 2006 09:55:16 -0000 Subject: [Bug 57502] Re: JMicron PATA/SATA Controller does not work References: <20060823192235.13463.13121.malonedeb@gandwana.ubuntu.com> Message-ID: <20060923095516.23105.42632.malone@gangotri.ubuntu.com> According to http://cdimage.ubuntu.com/daily/20060923/edgy-alternate- amd64.list (the package include list for the AMD64 image) the kernel included is: /pool/main/l/linux-source-2.6.17/linux- image-2.6.17-9-generic_2.6.17-9.23_amd64.deb which to my inexperienced eye, looks like the latest one... i'll be trying this in about 6 hours and will post back if it worked with my P5B/CoreDuo then -- JMicron PATA/SATA Controller does not work https://launchpad.net/bugs/57502 From wwuster at yahoo.com Sat Sep 23 12:22:39 2006 From: wwuster at yahoo.com (wwuster) Date: Sat, 23 Sep 2006 12:22:39 -0000 Subject: [Bug 57502] Re: JMicron PATA/SATA Controller does not work References: <20060823192235.13463.13121.malonedeb@gandwana.ubuntu.com> Message-ID: <20060923122239.17562.34094.malone@gandwana.ubuntu.com> 8:00 am usa eastern time, sept 23. I downloaded the current daily build: 23-Sep-2006 07:34 702M Alternate install CD for PC (Intel x86) computers (standard download) I tried to install in text mode, but I still get the problem: "No common CD-ROM drive was detected". I have a new intel motherboard and a core 2 duo. Is this really going to be fixed soon? William -- JMicron PATA/SATA Controller does not work https://launchpad.net/bugs/57502 From ivoks at grad.hr Sat Sep 23 13:04:45 2006 From: ivoks at grad.hr (=?utf-8?q?Ante_Karamati=C4=87?=) Date: Sat, 23 Sep 2006 13:04:45 -0000 Subject: [Bug 57502] Re: [Bug 57502] Re: JMicron PATA/SATA Controller does not work References: <20060823192235.13463.13121.malonedeb@gandwana.ubuntu.com> <20060923122239.17562.34094.malone@gandwana.ubuntu.com> Message-ID: <1159016685.15632.2.camel@i8600.gfr.local> Na Sub, 2006-09-23 u 12:22 +0000, wwuster je napisao: > Is this really going to be fixed soon? This will be fixed for Edgy, but there are no guarantees it will be fixed tomorrow, today or for three days. Edgy has a roadmap, it's still under development and it's quite normal for system to be non-functional while under development. @ph8 Right, but installer still uses -8-386, so fix isn't in it. -- Ante Karamatić PGP: 0xD3BDA225 -- JMicron PATA/SATA Controller does not work https://launchpad.net/bugs/57502 From wwuster at yahoo.com Sat Sep 23 13:46:40 2006 From: wwuster at yahoo.com (wwuster) Date: Sat, 23 Sep 2006 13:46:40 -0000 Subject: [Bug 57502] Re: JMicron PATA/SATA Controller does not work References: <20060823192235.13463.13121.malonedeb@gandwana.ubuntu.com> Message-ID: <20060923134640.17606.613.malone@gandwana.ubuntu.com> > This will be fixed for Edgy, but there are no guarantees it will be > fixed tomorrow, today or for three days. Edgy has a roadmap, it's still > under development and it's quite normal for system to be non-functional > while under development. But you said yesterday: > It's fixed in Edgy, but there is still no install CD that includes that > fix. It will be, tomorrow around 8AM CET. Do you mean that there will be an install cd today? William -- JMicron PATA/SATA Controller does not work https://launchpad.net/bugs/57502 From ivoks at grad.hr Sat Sep 23 14:00:41 2006 From: ivoks at grad.hr (=?utf-8?q?Ante_Karamati=C4=87?=) Date: Sat, 23 Sep 2006 14:00:41 -0000 Subject: [Bug 57502] Re: [Bug 57502] Re: JMicron PATA/SATA Controller does not work References: <20060823192235.13463.13121.malonedeb@gandwana.ubuntu.com> <20060923134640.17606.613.malone@gandwana.ubuntu.com> Message-ID: <1159020041.25299.0.camel@i8600.gfr.local> Na Sub, 2006-09-23 u 13:46 +0000, wwuster je napisao: > But you said yesterday: I did, but build machines weren't that fast as I've expected :) -- Ante Karamatić PGP: 0xD3BDA225 -- JMicron PATA/SATA Controller does not work https://launchpad.net/bugs/57502 From launch at mailinator.com Sat Sep 23 14:07:46 2006 From: launch at mailinator.com (anonym) Date: Sat, 23 Sep 2006 14:07:46 -0000 Subject: [Bug 21175] Re: Grub removes Windows boot option when NTFS partition needs recovery References: <20060113141121.21012.57814.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060923140746.17606.22518.malone@gandwana.ubuntu.com> Hey I got the same problem but, I added this which I found above but changed the hd0,0 to hd0,1 because of the dell recovery partition which is under hd0,0. When Windows booted it checked for consistency and did whatever it thought it had to do and worked fine after wards So editing the menu.lst file does work title Microsoft Windows root (hd0,1) savedefault makeactive chainloader +1 Thanks -- Grub removes Windows boot option when NTFS partition needs recovery https://launchpad.net/bugs/21175 From mzilhao at sapo.pt Sat Sep 23 16:21:06 2006 From: mzilhao at sapo.pt (Miguel) Date: Sat, 23 Sep 2006 16:21:06 -0000 Subject: [Bug 44805] Re: "critical temperature reached" with kernel 2.6.15-22-386 References: <20060515103402.15848.98592.malonedeb@gangotri.ubuntu.com> Message-ID: <20060923162106.23105.36614.malone@gangotri.ubuntu.com> i installed edgy to another partition. with kernel 2.6.17-9-generic the computer always freezes during booting. even with the boot option pci=noacpi. it works only with acpi=off... -- "critical temperature reached" with kernel 2.6.15-22-386 https://launchpad.net/bugs/44805 From marcin.antczak at gmail.com Sat Sep 23 17:54:27 2006 From: marcin.antczak at gmail.com (Marcin Antczak) Date: Sat, 23 Sep 2006 17:54:27 -0000 Subject: [Bug 57502] Re: JMicron PATA/SATA Controller does not work References: <20060823192235.13463.13121.malonedeb@gandwana.ubuntu.com> Message-ID: <20060923175429.23036.3617.malone@gangotri.ubuntu.com> I installed edgy from daily build 21.09.2006 on some machine with via chipset and Pentium IV 3GHz and it installed without problems. I "apt upgraded" and moved hdd to machine with Asus P5B mobo and Core 2 Duo CPU. Then I just couldn't boot. It stopped on some ACPI messages and info about error when assigning "ACPI something" to CPU. I don't remember this message so I cannot write it here. But I just would like to report this behaviour to developers. Then I gave up and installed dapper using instlux. Another issue is that currently on Asus p5b mobo there are two gigabyte NIC's controlled by two Marvell chips while only one NIC's is functional in 10/100 mode. -- JMicron PATA/SATA Controller does not work https://launchpad.net/bugs/57502 From mazargman at gmail.com Sat Sep 23 21:22:21 2006 From: mazargman at gmail.com (Vincent Jestin) Date: Sat, 23 Sep 2006 21:22:21 -0000 Subject: [Bug 16247] Re: Dell Inspiron 600m - ndiswrapper hangs on boot if running on battery References: <20060113134532.21012.77031.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060923212221.23036.80830.malone@gangotri.ubuntu.com> I confirm this bug exists in edgy: I installed it today from knot3 liveCD, then I upgraded to get the latest changes. I disagree with Seth: I tried both ndiswrapper and bcm43xx "drivers" and I get the same result (see first description). What can I do to help developers solving this bug? -- Dell Inspiron 600m - ndiswrapper hangs on boot if running on battery https://launchpad.net/bugs/16247 From cinchurge at gmail.com Sun Sep 24 05:25:04 2006 From: cinchurge at gmail.com (cinchurge) Date: Sun, 24 Sep 2006 05:25:04 -0000 Subject: [Bug 12483] Re: laptop-mode/IDE-APM hang on various laptops References: <20060113132548.21012.74332.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060924052504.17606.21984.malone@gandwana.ubuntu.com> >Hmmm, this may be unrelated if disabling laptop mode doesn't make it go >away. Especially since there's suspending involved, which there isn't in >the other reports. thanks for the help, but does this look like any other known bug of Ubuntu? it's driving me crazy... a laptop is almost no good to me if it can't suspend right :( -- laptop-mode/IDE-APM hang on various laptops https://launchpad.net/bugs/12483 From sieni at kolumbus.fi Sun Sep 24 06:16:41 2006 From: sieni at kolumbus.fi (Jouni Nieminen) Date: Sun, 24 Sep 2006 06:16:41 -0000 Subject: [Bug 62126] System freezes (responsive only to alt-sysrq) References: <20060924061641.17606.39946.malonedeb@gandwana.ubuntu.com> Message-ID: <20060924061641.17606.39946.malonedeb@gandwana.ubuntu.com> Public bug reported: Binary package hint: linux System freezes for unknown reason. System was not actively used at the time of freeze (1 user was logged in X though). uname -a: Linux shroom 2.6.15-27-386 #1 PREEMPT Sat Sep 16 01:51:59 UTC 2006 i686 GNU/Linux messages: Sep 23 23:36:43 localhost -- MARK -- Sep 23 23:53:34 localhost kernel: [17364530.568000] c0148f0a Sep 23 23:53:34 localhost kernel: [17364530.568000] PREEMPT Sep 23 23:53:34 localhost kernel: [17364530.568000] Modules linked in: nls_cp437 isofs udf rfcomm l2cap bluetooth ipt_limit iptable_mangle ipt_LOG ipt_MASQUERADE ip_nat ipt_TOS ipt_REJECT ip_conntrack_irc ip_conntrack_ftp ipt_state ip_conntrack nfnetlink iptable_filter ip_tables ppdev speedstep_lib cpufreq_userspace cpufreq_stats freq_table cpufreq_powersave cpufreq_ondemand cpufreq_conservative video tc1100_wmi sony_acpi pcc_acpi hotkey dev_acpi container button acpi_sbs battery ac i2c_acpi_ec i2c_core ipv6 dm_mod af_packet md_mod lp pcspkr floppy snd_emu10k1_synth snd_emux_synth snd_seq_virmidi snd_seq_midi_emul snd_seq_dummy snd_seq_oss parport_pc parport snd_seq_midi snd_seq_midi_event snd_seq snd_emu10k1 snd_rawmidi snd_ac97_codec snd_ac97_bus snd_pcm_oss snd_mixer_oss snd_pcm snd_seq_device snd_timer snd_page_alloc snd_util_mem snd_hwdep psmouse matrox_w1 wire snd soundcore 3c59x mii emu10k1_gp gameport rtc serio_raw intel_agp agpgart shpchp pci_hotplug evdev tsdev usbhid ext3 jbd ide_generic uhci_hcd usbcor Sep 23 23:53:34 localhost kernel: ide_cd cdrom ide_disk piix generic thermal processor fan capability commoncap vga16fb vgastate fbcon tileblit font bitblit softcursor Sep 23 23:53:34 localhost kernel: [17364530.568000] CPU: 0 Sep 23 23:53:34 localhost kernel: [17364530.568000] EIP: 0060:[free_block+106/240] Not tainted VLI Sep 23 23:53:34 localhost kernel: [17364530.568000] EFLAGS: 00010002 (2.6.15-27-386) Sep 23 23:53:34 localhost kernel: [17364530.568000] EIP is at free_block+0x6a/0xf0 Sep 23 23:53:34 localhost kernel: [17364530.568000] eax: 00000000 ebx: 0692f71b ecx: 76ef2e6d edx: c1000000 Sep 23 23:53:34 localhost kernel: [17364530.568000] esi: dffe8260 edi: 00000000 ebp: dffea360 esp: dff25ef8 Sep 23 23:53:34 localhost kernel: [17364530.568000] ds: 007b es: 007b ss: 0068 Sep 23 23:53:34 localhost kernel: [17364530.568000] Process events/0 (pid: 4, threadinfo=dff24000 task=dffcda90) Sep 23 23:53:34 localhost kernel: [17364530.568000] Stack: dffe5e10 13cccce1 dffe5e00 dffea360 c01495e8 dffea360 dffe5e10 13cccce1 Sep 23 23:53:34 localhost kernel: [17364530.568000] 00000000 dffea360 dffe82b0 dffea360 dffea3ac dffe8260 c01496cb dffea360 Sep 23 23:53:34 localhost kernel: [17364530.568000] dffe5e00 00000000 00000000 dff24000 dffe82b0 00000002 dff24000 c04055e0 Sep 23 23:53:34 localhost kernel: [17364530.568000] Call Trace: Sep 23 23:53:34 localhost kernel: [17364530.568000] [drain_array_locked+72/160] drain_array_locked+0x48/0xa0 Sep 23 23:53:34 localhost kernel: [17364530.568000] [cache_reap+139/448] cache_reap+0x8b/0x1c0 Sep 23 23:53:34 localhost kernel: [17364530.568000] [worker_thread+442/656] worker_thread+0x1ba/0x290 Sep 23 23:53:34 localhost kernel: [17364530.568000] [cache_reap+0/448] cache_reap+0x0/0x1c0 Sep 23 23:53:34 localhost kernel: [17364530.568000] [default_wake_function+0/32] default_wake_function+0x0/0x20 Sep 23 23:53:34 localhost kernel: [17364530.568000] [worker_thread+0/656] worker_thread+0x0/0x290 Sep 23 23:53:34 localhost kernel: [17364530.568000] [kthread+147/160] kthread+0x93/0xa0 Sep 23 23:53:34 localhost kernel: [17364530.568000] [kthread+0/160] kthread+0x0/0xa0 Sep 23 23:53:34 localhost kernel: [17364530.568000] [kernel_thread_helper+5/16] kernel_thread_helper+0x5/0x10 Sep 23 23:53:34 localhost kernel: [17364530.568000] Code: 0f 84 7b 00 00 00 8b 44 24 18 8b 0c b8 8d 81 00 00 00 40 c1 e8 0c c1 e0 05 8b 15 30 ab 40 c0 8b 5c 10 1c 8b 44 24 20 8b 74 85 14 <8b> 13 8b 43 04 89 42 04 89 10 c7 03 00 01 10 00 c7 43 04 00 02 Sep 23 23:53:34 localhost kernel: [17364530.568000] <6>note: events/0[4] exited with preempt_count 1 Sep 24 00:16:43 localhost -- MARK -- Sep 24 00:36:43 localhost -- MARK -- Sep 24 00:56:43 localhost -- MARK -- Sep 24 01:16:43 localhost -- MARK -- Sep 24 01:36:44 localhost -- MARK -- ** Affects: linux-meta (Ubuntu) Importance: Untriaged Status: Unconfirmed -- System freezes (responsive only to alt-sysrq) https://launchpad.net/bugs/62126 From caroline.ford.work at googlemail.com Sun Sep 24 06:33:11 2006 From: caroline.ford.work at googlemail.com (Caroline Ford) Date: Sun, 24 Sep 2006 06:33:11 -0000 Subject: [Bug 40762] Re: zd1201 usb wireless stick driver firmware missing in dapper drake flight 5 References: <20060422133216.30501.64821.malonedeb@gangotri.ubuntu.com> Message-ID: <20060924063311.17562.92877.malone@gandwana.ubuntu.com> ->Fix Released. Closing this ancient bug, it all works now in Dapper. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Unconfirmed => Fix Released -- zd1201 usb wireless stick driver firmware missing in dapper drake flight 5 https://launchpad.net/bugs/40762 From caroline.ford.work at googlemail.com Sun Sep 24 06:35:53 2006 From: caroline.ford.work at googlemail.com (Caroline Ford) Date: Sun, 24 Sep 2006 06:35:53 -0000 Subject: [Bug 38767] Re: [zd1211] 3com 3crusb10075 usb wifi dongle fails to work References: <20060408175749.32233.21634.malonedeb@gandwana.ubuntu.com> Message-ID: <20060924063553.17562.15474.malone@gandwana.ubuntu.com> ->Fix Released. Closing old bug. The driver has been updated since then (see bug #37795) and the driver is fine in Dapper. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Unconfirmed => Fix Released -- [zd1211] 3com 3crusb10075 usb wifi dongle fails to work https://launchpad.net/bugs/38767 From caroline.ford.work at googlemail.com Sun Sep 24 06:36:21 2006 From: caroline.ford.work at googlemail.com (Caroline Ford) Date: Sun, 24 Sep 2006 06:36:21 -0000 Subject: [Bug 37795] Re: zd1211 wireless driver broken, too old (20050315) References: <20060403011323.23733.67873.malonedeb@gandwana.ubuntu.com> Message-ID: <20060924063621.23036.14830.launchpad@gangotri.ubuntu.com> ** Bug 36558 has been marked a duplicate of this bug -- zd1211 wireless driver broken, too old (20050315) https://launchpad.net/bugs/37795 From caroline.ford.work at googlemail.com Sun Sep 24 06:36:21 2006 From: caroline.ford.work at googlemail.com (Caroline Ford) Date: Sun, 24 Sep 2006 06:36:21 -0000 Subject: [Bug 36558] Re: Encryption troubles References: <20060325102222.6253.33148.malonedeb@gandwana.ubuntu.com> Message-ID: <20060924063621.23036.8327.launchpad@gangotri.ubuntu.com> *** This bug is a duplicate of bug 37795 *** ** This bug has been marked a duplicate of bug 37795 zd1211 wireless driver broken, too old (20050315) -- Encryption troubles https://launchpad.net/bugs/36558 From ubuntu at glatzor.de Sun Sep 24 08:22:49 2006 From: ubuntu at glatzor.de (Sebastian Heinlein) Date: Sun, 24 Sep 2006 08:22:49 -0000 Subject: [Bug 61342] Re: Backport Intel 965 Express chipset support from 2.6.18 References: <20060920014823.23036.85753.malonedeb@gangotri.ubuntu.com> Message-ID: <20060924082249.23036.50452.malone@gangotri.ubuntu.com> I own an Intel DG965WH mainboard with onboard graphics Intel GMA X3000. The xserver still complains about a missing /dev/agpgart and too low videoram. See https://launchpad.net/distros/ubuntu/+source/xserver-xorg- driver-i810/+bug/62135 -- Backport Intel 965 Express chipset support from 2.6.18 https://launchpad.net/bugs/61342 From giuseppe at iuculano.it Sun Sep 24 09:42:28 2006 From: giuseppe at iuculano.it (Giuseppe Iuculano) Date: Sun, 24 Sep 2006 09:42:28 -0000 Subject: [Bug 58570] Re: kernel_image target fails with kernel 2.6.18-rc References: <20060902121437.30936.48954.malonedeb@gandwana.ubuntu.com> Message-ID: <20060924094228.17562.92066.malone@gandwana.ubuntu.com> I can confirm this bug with the last 2.6.18 stable kernel. -- kernel_image target fails with kernel 2.6.18-rc https://launchpad.net/bugs/58570 From ubuntu-launchpad at theplayboymansion.net Sun Sep 24 10:10:38 2006 From: ubuntu-launchpad at theplayboymansion.net (ph8) Date: Sun, 24 Sep 2006 10:10:38 -0000 Subject: [Bug 57502] Re: JMicron PATA/SATA Controller does not work References: <20060823192235.13463.13121.malonedeb@gandwana.ubuntu.com> Message-ID: <20060924101038.17562.75841.malone@gandwana.ubuntu.com> Confirmed as broken in today's daily build - gah! Installer kernel is -8 which i believe is the one that should contain the fix, what other information can I offer? That's CD-ROM drive detection failing AND detection of my SATAs failing (even after trying various bios compatibility settings, AHCI seems to say they're up and freeze for 30 seconds, then the link is lost due to qc timeout or similar...) -- JMicron PATA/SATA Controller does not work https://launchpad.net/bugs/57502 From pandisv at yahoo.co.uk Sun Sep 24 10:07:57 2006 From: pandisv at yahoo.co.uk (Vassilis Pandis) Date: Sun, 24 Sep 2006 10:07:57 -0000 Subject: [Bug 62126] Re: System freezes (responsive only to alt-sysrq) References: <20060924061641.17606.39946.malonedeb@gandwana.ubuntu.com> Message-ID: <20060924100757.17562.15588.launchpad@gandwana.ubuntu.com> ** Changed in: linux-meta (Ubuntu) Sourcepackagename: linux-meta => linux-source-2.6.15 -- System freezes (responsive only to alt-sysrq) https://launchpad.net/bugs/62126 From bart at samwel.tk Sun Sep 24 10:37:39 2006 From: bart at samwel.tk (Bart Samwel) Date: Sun, 24 Sep 2006 10:37:39 -0000 Subject: [Bug 12483] Re: [Bug 12483] Re: laptop-mode/IDE-APM hang on various laptops References: <20060113132548.21012.74332.launchpad@macquarie.warthogs.hbd.com> <20060924052504.17606.21984.malone@gandwana.ubuntu.com> Message-ID: <45165FF3.6090206@samwel.tk> cinchurge wrote: >> Hmmm, this may be unrelated if disabling laptop mode doesn't make it go >> away. Especially since there's suspending involved, which there isn't in >> the other reports. > > thanks for the help, but does this look like any other known bug of > Ubuntu? it's driving me crazy... a laptop is almost no good to me if it > can't suspend right :( I get that. Eh... perhaps bug 40929. Otherwise, I don't know. Anything related should show up by searching for "freeze" or "hang", but I don't see anything that looks like it. Anybody else remember any similar bugs? -- laptop-mode/IDE-APM hang on various laptops https://launchpad.net/bugs/12483 From giuseppe at iuculano.it Sun Sep 24 11:18:43 2006 From: giuseppe at iuculano.it (Giuseppe Iuculano) Date: Sun, 24 Sep 2006 11:18:43 -0000 Subject: [Bug 58570] Re: kernel_image target fails with kernel 2.6.18-rc References: <20060902121437.30936.48954.malonedeb@gandwana.ubuntu.com> Message-ID: <20060924111843.23036.31639.malone@gangotri.ubuntu.com> kernel-package_10.057_all.deb fix this issue, please upgrade it. -- kernel_image target fails with kernel 2.6.18-rc https://launchpad.net/bugs/58570 From Corneliussen at gmail.com Sun Sep 24 12:32:32 2006 From: Corneliussen at gmail.com (Andcor) Date: Sun, 24 Sep 2006 12:32:32 -0000 Subject: [Bug 57502] Re: JMicron PATA/SATA Controller does not work References: <20060823192235.13463.13121.malonedeb@gandwana.ubuntu.com> Message-ID: <20060924123232.23036.52321.malone@gangotri.ubuntu.com> Wasn't it the kernel -9 that contained the patch ? I guess we just have to wait a little longer. Just wanted to say that I am surprised that the error correction goes this fast, as I found out my computer wasn't able to boot on the dapper or the edgy cd-roms, I made myself ready to wait for months. Thank you everybody!! -- JMicron PATA/SATA Controller does not work https://launchpad.net/bugs/57502 From debiant at insightbb.com Sun Sep 24 14:39:43 2006 From: debiant at insightbb.com (ravenwritingdesk) Date: Sun, 24 Sep 2006 14:39:43 -0000 Subject: [Bug 62172] conflicts with bittorrent (or java) for complete lock up (no response) References: <20060924143943.17606.79550.malonedeb@gandwana.ubuntu.com> Message-ID: <20060924143943.17606.79550.malonedeb@gandwana.ubuntu.com> Public bug reported: Binary package hint: linux-image-2.6.15-27-amd64-generic 1. Upgrade kernel from linux-amd64-generic-2.6.15-24 to linux- amd64-generic-2.6.15-27 2. Download with bittorrent 3. Reel in horror as your system stops responding after several minutes. ** Affects: linux-source-2.6.15 (Ubuntu) Importance: Untriaged Status: Unconfirmed -- conflicts with bittorrent (or java) for complete lock up (no response) https://launchpad.net/bugs/62172 From wannesss+launchpad at gmail.com Sun Sep 24 15:59:56 2006 From: wannesss+launchpad at gmail.com (wannes) Date: Sun, 24 Sep 2006 15:59:56 -0000 Subject: [Bug 54419] Re: usb change between 2.6.15-23 and 2.6.15-26 breaks working setup References: <20060729074252.3952.45596.malonedeb@gangotri.ubuntu.com> Message-ID: <20060924155956.23036.81521.malone@gangotri.ubuntu.com> I experience the same when inserting an USB-memory stick or CF-card in my card-reader. The modprobe -ehci_hcd thing works so I blacklisted the module ... -- usb change between 2.6.15-23 and 2.6.15-26 breaks working setup https://launchpad.net/bugs/54419 From pele2 at email.nu Sun Sep 24 16:39:12 2006 From: pele2 at email.nu (pelle.k) Date: Sun, 24 Sep 2006 16:39:12 -0000 Subject: [Bug 60630] Re: edgy ndiswrapper-utils, cant find binaries etc... References: <20060915214053.28890.63065.malonedeb@gangotri.ubuntu.com> Message-ID: <20060924163912.17606.36251.launchpad@gandwana.ubuntu.com> ** Summary changed: - edgy ndiswrapper-common cant find ndiswrapper-1.1 etc... + edgy ndiswrapper-utils, cant find binaries etc... ** Description changed: Binary package hint: ndiswrapper-common edgy ndiswrapper and loadndiswrapper scripts can't find the binary (ndiswrapper-1.1 and loadndiswrapper-1.1), and when i replaced them with symlinks to the right binaries i couldn't load the kernel module anyway. - It totally refused to load. + It totally refused to load. [edit]I know recognize the same behaviour as + in Bug #59983[/edit] -- edgy ndiswrapper-utils, cant find binaries etc... https://launchpad.net/bugs/60630 From pele2 at email.nu Sun Sep 24 16:42:10 2006 From: pele2 at email.nu (pelle.k) Date: Sun, 24 Sep 2006 16:42:10 -0000 Subject: [Bug 59983] Re: ndiswrapper in edgy broken References: <20060911235728.16647.6163.malonedeb@gangotri.ubuntu.com> Message-ID: <20060924164210.23036.73776.malone@gangotri.ubuntu.com> I'm the author of #60630, and it seems it's the same bug were talking about. I've updated it and pointed it here... -- ndiswrapper in edgy broken https://launchpad.net/bugs/59983 From hoeflerb at gmail.com Sun Sep 24 17:26:10 2006 From: hoeflerb at gmail.com (Hoeflerb) Date: Sun, 24 Sep 2006 17:26:10 -0000 Subject: [Bug 57502] Re: JMicron PATA/SATA Controller does not work References: <20060823192235.13463.13121.malonedeb@gandwana.ubuntu.com> Message-ID: <20060924172610.23105.15563.malone@gangotri.ubuntu.com> Using the 2.6.17-9.23-386 kernel in edgy with an ECS-P965T-A motherboard, the IDE controller doesn't appear to be working yet (with or without all-generic-ide). I've attached some hardware info. I haven't tried to compile this kernel myself yet, so I don't know if compiling in ide-generic (instead of as a module) still works as it did before. ** Attachment added: "lspci -vv, lspci -vvn, dmesg" http://librarian.launchpad.net/4417478/lspci -- JMicron PATA/SATA Controller does not work https://launchpad.net/bugs/57502 From jizhongf at 126.com Sun Sep 24 17:26:13 2006 From: jizhongf at 126.com (jizhongf) Date: Sun, 24 Sep 2006 17:26:13 -0000 Subject: [Bug 38421] Re: no aic94xx support in dapper kernel References: <20060406142318.24516.55253.malonedeb@gangotri.ubuntu.com> Message-ID: <20060924172613.17562.4749.malone@gandwana.ubuntu.com> hello, who can help me to compile a driver for aic94xx based on ubuntu6.06.1 server? I've try to compile a driver 1.0.8, but it didn't work. the dmesg log is : [42950025.500000] Loading AIC-94xx Linux SAS/SATA Family Driver, Rev: 1.0.8-6 [42950025.500000] [42950025.500000] Setting User Option (cmd_per_lun) : 12 [42950025.500000] [42950025.500000] Probing Adaptec AIC-94xx Controller(s)... [42950025.500000] ACPI: PCI Interrupt 0000:02:06.0[A] -> GSI 18 (level, low) -> IRQ 185 [42950025.570000] scsi4 : Adaptec AIC-9410 SAS/SATA Host Adapter [42950025.600000] Vendor: Model: Rev: [42950025.600000] Type: Direct-Access ANSI SCSI revision: 00 [42950025.600000] sdd: Unit Not Ready, sense: [42950025.600000] : Current: sense key: Illegal Request [42950025.600000] Additional sense: Invalid command operation code [42950025.600000] sdd : sector size 0 reported, assuming 512. [42950025.600000] SCSI device sdd: 1 512-byte hdwr sectors (0 MB) [42950025.600000] sdd: asking for cache data failed [42950025.610000] sdd: assuming drive cache: write through [42950025.620000] sdd: Unit Not Ready, sense: [42950025.620000] : Current: sense key: Illegal Request [42950025.620000] Additional sense: Invalid command operation code [42950025.620000] sdd : sector size 0 reported, assuming 512. [42950025.620000] SCSI device sdd: 1 512-byte hdwr sectors (0 MB) [42950025.620000] sdd: asking for cache data failed [42950025.630000] sdd: assuming drive cache: write through [42950025.640000] sdd: sdd1 [42950025.650000] sd 4:0:128:0: Attached scsi disk sdd [42950025.650000] sd 4:0:128:0: Attached scsi generic sg3 type 0 [42950025.690000] Buffer I/O error on device sdd1, logical block 312568576 [42950025.700000] Buffer I/O error on device sdd1, logical block 312568577 [42950025.700000] AIC-94xx controller(s) attached = 1. [42950025.700000] [42950025.710000] Buffer I/O error on device sdd1, logical block 312568578 [42950025.720000] Buffer I/O error on device sdd1, logical block 312568579 [42950025.730000] Buffer I/O error on device sdd1, logical block 312568576 [42950025.730000] Buffer I/O error on device sdd1, logical block 312568577 [42950025.740000] Buffer I/O error on device sdd1, logical block 312568578 [42950025.750000] Buffer I/O error on device sdd1, logical block 312568579 [42950025.760000] Buffer I/O error on device sdd1, logical block 312568640 [42950025.760000] Buffer I/O error on device sdd1, logical block 312568640 -- no aic94xx support in dapper kernel https://launchpad.net/bugs/38421 From bf5 at btinternet.com Sun Sep 24 18:50:03 2006 From: bf5 at btinternet.com (JaFFa) Date: Sun, 24 Sep 2006 18:50:03 -0000 Subject: [Bug 57502] Re: JMicron PATA/SATA Controller does not work References: <20060823192235.13463.13121.malonedeb@gandwana.ubuntu.com> Message-ID: <20060924185003.17606.30818.malone@gandwana.ubuntu.com> On my DS3 I am having no joy trying to make it work. I just thought id register my interest in getting this osrted out as soon as possible. -- JMicron PATA/SATA Controller does not work https://launchpad.net/bugs/57502 From mb at gem.win.co.nz Sun Sep 24 18:47:45 2006 From: mb at gem.win.co.nz (Mario Becroft) Date: Sun, 24 Sep 2006 18:47:45 -0000 Subject: [Bug 21574] Re: sound gone after resuming from sleep on hp nx8220 References: <20060113141334.21012.43238.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060924184745.17562.18410.malone@gandwana.ubuntu.com> I have this exact problem with HP nw8240. After suspend-to-RAM, the internal speakers do not work, but headphones are ok. A suspend-to-disc (power off) cycle fixes the problem. I tried comparing all the AC97 registers and other info in /proc/asound but they are identical in the working and not-working cases. I have not done any ALSA development so I am not sure if there is an easy way of playing with the AC97 registers with a userspace program. Otherwise I am not sure how to easily debug this problem. Obviously something subtle has to be initialised after resume. Is anyone else working on this? -- sound gone after resuming from sleep on hp nx8220 https://launchpad.net/bugs/21574 From debiant at insightbb.com Sun Sep 24 18:52:54 2006 From: debiant at insightbb.com (ravenwritingdesk) Date: Sun, 24 Sep 2006 18:52:54 -0000 Subject: [Bug 62126] Re: System freezes (responsive only to alt-sysrq) References: <20060924061641.17606.39946.malonedeb@gandwana.ubuntu.com> Message-ID: <20060924185254.17606.93210.malone@gandwana.ubuntu.com> also experienced system freeze with 2.6.15-27 (not -25), but only when running Java program bittorrent. I did not keep the kernel long enough to find out if it would replicate without java. You didn't have a Java client running did you? -- System freezes (responsive only to alt-sysrq) https://launchpad.net/bugs/62126 From stuhood at gmail.com Sun Sep 24 18:59:00 2006 From: stuhood at gmail.com (Stu Hood) Date: Sun, 24 Sep 2006 18:59:00 -0000 Subject: [Bug 21609] Re: Resume failure on ThinkPad T41 References: <20060113141348.21012.53114.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060924185900.17562.62631.malone@gandwana.ubuntu.com> Dapper Suspends/Resumes just fine on my T41. -- Resume failure on ThinkPad T41 https://launchpad.net/bugs/21609 From pvincent00 at yahoo.fr Sun Sep 24 19:18:45 2006 From: pvincent00 at yahoo.fr (Pascal Vincent) Date: Sun, 24 Sep 2006 19:18:45 -0000 Subject: [Bug 49719] Re: #define PRISM2_NON_VOLATILE_DOWNLOAD commented out in hostap_config.h References: <20060614142057.4888.57540.malonedeb@gangotri.ubuntu.com> Message-ID: <20060924191845.23105.51462.malone@gangotri.ubuntu.com> I confirm the request. I can't flash my prism2 card on dapper for the same reason, so i decided to do it under windows, with success. -- #define PRISM2_NON_VOLATILE_DOWNLOAD commented out in hostap_config.h https://launchpad.net/bugs/49719 From marcin.antczak at gmail.com Sun Sep 24 19:31:19 2006 From: marcin.antczak at gmail.com (Marcin Antczak) Date: Sun, 24 Sep 2006 19:31:19 -0000 Subject: [Bug 62206] Marvell 88E8056 gigabyte LAN interface on asus p5b doesn't work References: <20060924193119.17562.63865.malonedeb@gandwana.ubuntu.com> Message-ID: <20060924193119.17562.63865.malonedeb@gandwana.ubuntu.com> Public bug reported: Binary package hint: linux-image-2.6-686 Asus P5B Deluxe mobo has two onboard network interfaces. First is MArvell 88E8001 Gigabit Ethernet Controller and second is Marvell 88E8056. And while 88E8001 is supported (although reports that is 10/100 interface - not 1000 - second doesn't work and isn't recognized by kernel. lspci -v says that: 0000:02:00.0 Ethernet controller: Marvell Technology Group Ltd.: Unknown device 4364 (rev 12) Subsystem: ASUSTeK Computer Inc.: Unknown device 81f8 Flags: bus master, fast devsel, latency 0, IRQ 10 Memory at fe7fc000 (64-bit, non-prefetchable) [size=16K] I/O ports at 9800 [size=256] Expansion ROM at fe7c0000 [disabled] [size=128K] ** Affects: linux-meta (Ubuntu) Importance: Untriaged Status: Unconfirmed -- Marvell 88E8056 gigabyte LAN interface on asus p5b doesn't work https://launchpad.net/bugs/62206 From pandisv at yahoo.co.uk Sun Sep 24 20:44:50 2006 From: pandisv at yahoo.co.uk (Vassilis Pandis) Date: Sun, 24 Sep 2006 20:44:50 -0000 Subject: [Bug 62206] Re: Marvell 88E8056 gigabyte LAN interface on asus p5b doesn't work References: <20060924193119.17562.63865.malonedeb@gandwana.ubuntu.com> Message-ID: <20060924204450.23105.38686.launchpad@gangotri.ubuntu.com> ** Changed in: linux-meta (Ubuntu) Sourcepackagename: linux-meta => linux-source-2.6.15 -- Marvell 88E8056 gigabyte LAN interface on asus p5b doesn't work https://launchpad.net/bugs/62206 From siepo at cybercomm.nl Sun Sep 24 21:05:32 2006 From: siepo at cybercomm.nl (Siep Kroonenberg) Date: Sun, 24 Sep 2006 21:05:32 -0000 Subject: [Bug 57383] Re: fn key no longer works on kernel References: <20060823015246.13463.59145.malonedeb@gandwana.ubuntu.com> Message-ID: <20060924210532.23105.99310.malone@gangotri.ubuntu.com> I don't know the fn key is supposed to work, but xev does return different keycodes for e.g. function keys and arrow keys when the fn key is pressed, even though xev doesn't respond to fn by itself. -- fn key no longer works on kernel https://launchpad.net/bugs/57383 From cornelis at p-c-software.de Sun Sep 24 21:05:09 2006 From: cornelis at p-c-software.de (Patrick Cornelissen) Date: Sun, 24 Sep 2006 21:05:09 -0000 Subject: [Bug 47241] Re: freezes on boot References: <20060529075557.21895.60622.malonedeb@gandwana.ubuntu.com> Message-ID: <20060924210509.17562.7422.malone@gandwana.ubuntu.com> I just tried to install edgy knot 3 on the system above and it still freezey, when I try to boot from CD. The boot menu appears, I can select a boot mode (tested normal and safe mode) and then the kernel gets unpacked and the boot progressbar appears (+ubuntu logo) and the system freezes. Does someone know the difference between debian installer (sarge+testing) and the ubuntu installer? The debian installer works fine on the system (as well as some other OSses. -- freezes on boot https://launchpad.net/bugs/47241 From pvanhoof at gnome.org Sun Sep 24 21:50:22 2006 From: pvanhoof at gnome.org (Philip Van Hoof) Date: Sun, 24 Sep 2006 21:50:22 -0000 Subject: [Bug 62222] 2.6.15-27 (-686) has problems with my keyboard References: <20060924215022.23036.66848.malonedeb@gangotri.ubuntu.com> Message-ID: <20060924215022.23036.66848.malonedeb@gangotri.ubuntu.com> Public bug reported: Binary package hint: kernel-image-2.6.15-27-386-di I own a Acer travelmate 8000. Using the latest kernel, I sometimes experience that keys (on my keyboard) don't always work. Each time it happens, a kernel error appears in the dmesg log. Reverting to 2.6.15-26 seems to fix the problem. Sep 24 19:36:39 localhost -- MARK -- Sep 24 19:55:40 localhost kernel: [17195158.228000] ACPI-0412: *** Error: Handler for [EmbeddedControl] returned AE_TIME Sep 24 19:55:40 localhost kernel: [17195158.228000] ACPI-0517: *** Error: Method parse/execution failed [\_SB_.ACAD._PSR] (Node dffe2340), AE_TIME Sep 24 19:55:40 localhost kernel: [17195158.280000] ACPI-0412: *** Error: Handler for [EmbeddedControl] returned AE_TIME Sep 24 19:55:40 localhost kernel: [17195158.280000] ACPI-0517: *** Error: Method parse/execution failed [\_SB_.BAT1._BST] (Node dffe2ee0), AE_TIME Sep 24 19:59:40 localhost kernel: [17195398.388000] ACPI-0412: *** Error: Handler for [EmbeddedControl] returned AE_TIME Sep 24 19:59:40 localhost kernel: [17195398.388000] ACPI-0517: *** Error: Method parse/execution failed [\_SB_.ACAD._PSR] (Node dffe2340), AE_TIME Sep 24 20:03:40 localhost kernel: [17195638.476000] ACPI-0412: *** Error: Handler for [EmbeddedControl] returned AE_TIME Sep 24 20:03:40 localhost kernel: [17195638.476000] ACPI-0517: *** Error: Method parse/execution failed [\_SB_.ACAD._PSR] (Node dffe2340), AE_TIME Sep 24 20:08:10 localhost kernel: [17195908.464000] ACPI-0412: *** Error: Handler for [EmbeddedControl] returned AE_TIME Sep 24 20:08:10 localhost kernel: [17195908.464000] ACPI-0517: *** Error: Method parse/execution failed [\_SB_.ACAD._PSR] (Node dffe2340), AE_TIME Sep 24 20:12:40 localhost kernel: [17196178.476000] ACPI-0412: *** Error: Handler for [EmbeddedControl] returned AE_TIME Sep 24 20:12:40 localhost kernel: [17196178.476000] ACPI-0517: *** Error: Method parse/execution failed [\_SB_.ACAD._PSR] (Node dffe2340), AE_TIME Sep 24 20:16:40 localhost kernel: [17196418.476000] ACPI-0412: *** Error: Handler for [EmbeddedControl] returned AE_TIME Sep 24 20:16:40 localhost kernel: [17196418.476000] ACPI-0517: *** Error: Method parse/execution failed [\_SB_.ACAD._PSR] (Node dffe2340), AE_TIME Sep 24 20:16:40 localhost kernel: [17196418.528000] ACPI-0412: *** Error: Handler for [EmbeddedControl] returned AE_TIME Sep 24 20:16:40 localhost kernel: [17196418.528000] ACPI-0517: *** Error: Method parse/execution failed [\_SB_.BAT1._BST] (Node dffe2ee0), AE_TIME Sep 24 20:17:10 localhost kernel: [17196448.476000] ACPI-0412: *** Error: Handler for [EmbeddedControl] returned AE_TIME Sep 24 20:17:10 localhost kernel: [17196448.476000] ACPI-0517: *** Error: Method parse/execution failed [\_SB_.ACAD._PSR] (Node dffe2340), AE_TIME Sep 24 20:21:10 localhost kernel: [17196688.476000] ACPI-0412: *** Error: Handler for [EmbeddedControl] returned AE_TIME Sep 24 20:21:10 localhost kernel: [17196688.476000] ACPI-0517: *** Error: Method parse/execution failed [\_SB_.ACAD._PSR] (Node dffe2340), AE_TIME Sep 24 20:21:10 localhost kernel: [17196688.528000] ACPI-0412: *** Error: Handler for [EmbeddedControl] returned AE_TIME Sep 24 20:21:10 localhost kernel: [17196688.528000] ACPI-0517: *** Error: Method parse/execution failed [\_SB_.BAT1._BST] (Node dffe2ee0), AE_TIME Sep 24 20:25:40 localhost kernel: [17196958.484000] ACPI-0412: *** Error: Handler for [EmbeddedControl] returned AE_TIME Sep 24 20:25:40 localhost kernel: [17196958.484000] ACPI-0517: *** Error: Method parse/execution failed [\_SB_.ACAD._PSR] (Node dffe2340), AE_TIME Sep 24 20:30:10 localhost kernel: [17197228.492000] ACPI-0412: *** Error: Handler for [EmbeddedControl] returned AE_TIME Sep 24 20:30:10 localhost kernel: [17197228.492000] ACPI-0517: *** Error: Method parse/execution failed [\_SB_.ACAD._PSR] (Node dffe2340), AE_TIME Sep 24 20:34:40 localhost kernel: [17197498.500000] ACPI-0412: *** Error: Handler for [EmbeddedControl] returned AE_TIME Sep 24 20:34:40 localhost kernel: [17197498.500000] ACPI-0517: *** Error: Method parse/execution failed [\_SB_.ACAD._PSR] (Node dffe2340), AE_TIME Sep 24 20:39:40 localhost kernel: [17197798.500000] ACPI-0412: *** Error: Handler for [EmbeddedControl] returned AE_TIME Sep 24 20:39:40 localhost kernel: [17197798.500000] ACPI-0517: *** Error: Method parse/execution failed [\_SB_.ACAD._PSR] (Node dffe2340), AE_TIME Sep 24 20:44:10 localhost kernel: [17198068.500000] ACPI-0412: *** Error: Handler for [EmbeddedControl] returned AE_TIME Sep 24 20:44:10 localhost kernel: [17198068.500000] ACPI-0517: *** Error: Method parse/execution failed [\_SB_.ACAD._PSR] (Node dffe2340), AE_TIME Sep 24 20:48:10 localhost kernel: [17198308.504000] ACPI-0412: *** Error: Handler for [EmbeddedControl] returned AE_TIME Sep 24 20:48:10 localhost kernel: [17198308.504000] ACPI-0517: *** Error: Method parse/execution failed [\_SB_.ACAD._PSR] (Node dffe2340), AE_TIME Sep 24 20:48:10 localhost kernel: [17198308.556000] ACPI-0412: *** Error: Handler for [EmbeddedControl] returned AE_TIME Sep 24 20:48:10 localhost kernel: [17198308.556000] ACPI-0517: *** Error: Method parse/execution failed [\_SB_.BAT1._BST] (Node dffe2ee0), AE_TIME Sep 24 20:52:40 localhost kernel: [17198578.508000] ACPI-0412: *** Error: Handler for [EmbeddedControl] returned AE_TIME Sep 24 20:52:40 localhost kernel: [17198578.508000] ACPI-0517: *** Error: Method parse/execution failed [\_SB_.ACAD._PSR] (Node dffe2340), AE_TIME Sep 24 20:52:40 localhost kernel: [17198578.560000] ACPI-0412: *** Error: Handler for [EmbeddedControl] returned AE_TIME Sep 24 20:52:40 localhost kernel: [17198578.560000] ACPI-0517: *** Error: Method parse/execution failed [\_SB_.BAT1._BST] (Node dffe2ee0), AE_TIME Sep 24 20:57:10 localhost kernel: [17198848.508000] ACPI-0412: *** Error: Handler for [EmbeddedControl] returned AE_TIME Sep 24 20:57:10 localhost kernel: [17198848.508000] ACPI-0517: *** Error: Method parse/execution failed [\_SB_.ACAD._PSR] (Node dffe2340), AE_TIME Sep 24 21:01:40 localhost kernel: [17199118.516000] ACPI-0412: *** Error: Handler for [EmbeddedControl] returned AE_TIME Sep 24 21:01:40 localhost kernel: [17199118.516000] ACPI-0517: *** Error: Method parse/execution failed [\_SB_.ACAD._PSR] (Node dffe2340), AE_TIME Sep 24 21:06:10 localhost kernel: [17199388.520000] ACPI-0412: *** Error: Handler for [EmbeddedControl] returned AE_TIME Sep 24 21:06:10 localhost kernel: [17199388.520000] ACPI-0517: *** Error: Method parse/execution failed [\_SB_.ACAD._PSR] (Node dffe2340), AE_TIME Sep 24 21:09:40 localhost kernel: [17199598.668000] ACPI-0412: *** Error: Handler for [EmbeddedControl] returned AE_TIME Sep 24 21:09:40 localhost kernel: [17199598.668000] ACPI-0517: *** Error: Method parse/execution failed [\_SB_.BAT1.UPBS] (Node dffe2ea0), AE_TIME Sep 24 21:09:40 localhost kernel: [17199598.668000] ACPI-0517: *** Error: Method parse/execution failed [\_SB_.BAT1._BST] (Node dffe2ee0), AE_TIME Sep 24 21:10:10 localhost kernel: [17199628.540000] ACPI-0412: *** Error: Handler for [EmbeddedControl] returned AE_TIME Sep 24 21:10:10 localhost kernel: [17199628.540000] ACPI-0517: *** Error: Method parse/execution failed [\_SB_.ACAD._PSR] (Node dffe2340), AE_TIME Sep 24 21:10:10 localhost kernel: [17199628.592000] ACPI-0412: *** Error: Handler for [EmbeddedControl] returned AE_TIME Sep 24 21:10:10 localhost kernel: [17199628.592000] ACPI-0517: *** Error: Method parse/execution failed [\_SB_.BAT1._BST] (Node dffe2ee0), AE_TIME Sep 24 21:14:40 localhost kernel: [17199898.548000] ACPI-0412: *** Error: Handler for [EmbeddedControl] returned AE_TIME Sep 24 21:14:40 localhost kernel: [17199898.548000] ACPI-0517: *** Error: Method parse/execution failed [\_SB_.ACAD._PSR] (Node dffe2340), AE_TIME Sep 24 21:19:10 localhost kernel: [17200168.556000] ACPI-0412: *** Error: Handler for [EmbeddedControl] returned AE_TIME Sep 24 21:19:10 localhost kernel: [17200168.556000] ACPI-0517: *** Error: Method parse/execution failed [\_SB_.ACAD._PSR] (Node dffe2340), AE_TIME Sep 24 21:23:10 localhost kernel: [17200408.604000] ACPI-0412: *** Error: Handler for [EmbeddedControl] returned AE_TIME Sep 24 21:23:10 localhost kernel: [17200408.604000] ACPI-0517: *** Error: Method parse/execution failed [\_SB_.ACAD._PSR] (Node dffe2340), AE_TIME Sep 24 21:27:40 localhost kernel: [17200678.608000] ACPI-0412: *** Error: Handler for [EmbeddedControl] returned AE_TIME Sep 24 21:27:40 localhost kernel: [17200678.608000] ACPI-0517: *** Error: Method parse/execution failed [\_SB_.ACAD._PSR] (Node dffe2340), AE_TIME Sep 24 21:32:10 localhost kernel: [17200948.612000] ACPI-0412: *** Error: Handler for [EmbeddedControl] returned AE_TIME Sep 24 21:32:10 localhost kernel: [17200948.612000] ACPI-0517: *** Error: Method parse/execution failed [\_SB_.ACAD._PSR] (Node dffe2340), AE_TIME Sep 24 21:36:10 localhost kernel: [17201188.624000] ACPI-0412: *** Error: Handler for [EmbeddedControl] returned AE_TIME Sep 24 21:36:10 localhost kernel: [17201188.624000] ACPI-0517: *** Error: Method parse/execution failed [\_SB_.ACAD._PSR] (Node dffe2340), AE_TIME Sep 24 21:36:10 localhost kernel: [17201188.676000] ACPI-0412: *** Error: Handler for [EmbeddedControl] returned AE_TIME Sep 24 21:36:10 localhost kernel: [17201188.676000] ACPI-0517: *** Error: Method parse/execution failed [\_SB_.BAT1._BST] (Node dffe2ee0), AE_TIME Sep 24 21:36:40 localhost kernel: [17201218.628000] ACPI-0412: *** Error: Handler for [EmbeddedControl] returned AE_TIME Sep 24 21:36:40 localhost kernel: [17201218.628000] ACPI-0517: *** Error: Method parse/execution failed [\_SB_.ACAD._PSR] (Node dffe2340), AE_TIME Sep 24 21:36:40 localhost kernel: [17201218.680000] ACPI-0412: *** Error: Handler for [EmbeddedControl] returned AE_TIME Sep 24 21:36:40 localhost kernel: [17201218.680000] ACPI-0517: *** Error: Method parse/execution failed [\_SB_.BAT1._BST] (Node dffe2ee0), AE_TIME Sep 24 21:41:10 localhost kernel: [17201488.640000] ACPI-0412: *** Error: Handler for [EmbeddedControl] returned AE_TIME Sep 24 21:41:10 localhost kernel: [17201488.640000] ACPI-0517: *** Error: Method parse/execution failed [\_SB_.ACAD._PSR] (Node dffe2340), AE_TIME Sep 24 21:45:40 localhost kernel: [17201758.672000] ACPI-0412: *** Error: Handler for [EmbeddedControl] returned AE_TIME Sep 24 21:45:41 localhost kernel: [17201758.672000] ACPI-0517: *** Error: Method parse/execution failed [\_SB_.ACAD._PSR] (Node dffe2340), AE_TIME Sep 24 21:49:41 localhost kernel: [17201998.744000] ACPI-0412: *** Error: Handler for [EmbeddedControl] returned AE_TIME Sep 24 21:49:41 localhost kernel: [17201998.744000] ACPI-0517: *** Error: Method parse/execution failed [\_SB_.ACAD._PSR] (Node dffe2340), AE_TIME Sep 24 21:53:41 localhost kernel: [17202238.776000] ACPI-0412: *** Error: Handler for [EmbeddedControl] returned AE_TIME Sep 24 21:53:41 localhost kernel: [17202238.776000] ACPI-0517: *** Error: Method parse/execution failed [\_SB_.ACAD._PSR] (Node dffe2340), AE_TIME Sep 24 21:53:41 localhost kernel: [17202238.828000] ACPI-0412: *** Error: Handler for [EmbeddedControl] returned AE_TIME Sep 24 21:53:41 localhost kernel: [17202238.828000] ACPI-0517: *** Error: Method parse/execution failed [\_SB_.BAT1._BST] (Node dffe2ee0), AE_TIME Sep 24 21:58:11 localhost kernel: [17202508.812000] ACPI-0412: *** Error: Handler for [EmbeddedControl] returned AE_TIME Sep 24 21:58:11 localhost kernel: [17202508.812000] ACPI-0517: *** Error: Method parse/execution failed [\_SB_.ACAD._PSR] (Node dffe2340), AE_TIME Sep 24 22:02:11 localhost kernel: [17202748.844000] ACPI-0412: *** Error: Handler for [EmbeddedControl] returned AE_TIME Sep 24 22:02:11 localhost kernel: [17202748.844000] ACPI-0517: *** Error: Method parse/execution failed [\_SB_.ACAD._PSR] (Node dffe2340), AE_TIME Sep 24 22:02:11 localhost kernel: [17202748.896000] ACPI-0412: *** Error: Handler for [EmbeddedControl] returned AE_TIME Sep 24 22:02:11 localhost kernel: [17202748.896000] ACPI-0517: *** Error: Method parse/execution failed [\_SB_.BAT1._BST] (Node dffe2ee0), AE_TIME Sep 24 22:06:41 localhost kernel: [17203018.880000] ACPI-0412: *** Error: Handler for [EmbeddedControl] returned AE_TIME Sep 24 22:06:41 localhost kernel: [17203018.880000] ACPI-0517: *** Error: Method parse/execution failed [\_SB_.ACAD._PSR] (Node dffe2340), AE_TIME Sep 24 22:11:11 localhost kernel: [17203288.912000] ACPI-0412: *** Error: Handler for [EmbeddedControl] returned AE_TIME Sep 24 22:11:11 localhost kernel: [17203288.912000] ACPI-0517: *** Error: Method parse/execution failed [\_SB_.ACAD._PSR] (Node dffe2340), AE_TIME Sep 24 22:15:11 localhost kernel: [17203528.944000] ACPI-0412: *** Error: Handler for [EmbeddedControl] returned AE_TIME Sep 24 22:15:11 localhost kernel: [17203528.944000] ACPI-0517: *** Error: Method parse/execution failed [\_SB_.ACAD._PSR] (Node dffe2340), AE_TIME Sep 24 22:19:41 localhost kernel: [17203798.980000] ACPI-0412: *** Error: Handler for [EmbeddedControl] returned AE_TIME Sep 24 22:19:41 localhost kernel: [17203798.980000] ACPI-0517: *** Error: Method parse/execution failed [\_SB_.ACAD._PSR] (Node dffe2340), AE_TIME Sep 24 22:23:41 localhost kernel: [17204039.008000] ACPI-0412: *** Error: Handler for [EmbeddedControl] returned AE_TIME Sep 24 22:23:41 localhost kernel: [17204039.008000] ACPI-0517: *** Error: Method parse/execution failed [\_SB_.ACAD._PSR] (Node dffe2340), AE_TIME Sep 24 22:23:41 localhost kernel: [17204039.060000] ACPI-0412: *** Error: Handler for [EmbeddedControl] returned AE_TIME Sep 24 22:23:41 localhost kernel: [17204039.060000] ACPI-0517: *** Error: Method parse/execution failed [\_SB_.BAT1._BST] (Node dffe2ee0), AE_TIME Sep 24 22:28:11 localhost kernel: [17204309.044000] ACPI-0412: *** Error: Handler for [EmbeddedControl] returned AE_TIME Sep 24 22:28:11 localhost kernel: [17204309.044000] ACPI-0517: *** Error: Method parse/execution failed [\_SB_.ACAD._PSR] (Node dffe2340), AE_TIME Sep 24 22:32:41 localhost kernel: [17204579.080000] ACPI-0412: *** Error: Handler for [EmbeddedControl] returned AE_TIME Sep 24 22:32:41 localhost kernel: [17204579.080000] ACPI-0517: *** Error: Method parse/execution failed [\_SB_.ACAD._PSR] (Node dffe2340), AE_TIME Sep 24 22:36:36 localhost kernel: [17204814.308000] ACPI-0412: *** Error: Handler for [EmbeddedControl] returned AE_TIME Sep 24 22:36:36 localhost kernel: [17204814.308000] ACPI-0517: *** Error: Method parse/execution failed [\_SB_.BAT1._BIF] (Node dffe2f00), AE_TIME Sep 24 22:36:41 localhost kernel: [17204819.112000] ACPI-0412: *** Error: Handler for [EmbeddedControl] returned AE_TIME Sep 24 22:36:41 localhost kernel: [17204819.112000] ACPI-0517: *** Error: Method parse/execution failed [\_SB_.ACAD._PSR] (Node dffe2340), AE_TIME Sep 24 22:36:41 localhost kernel: [17204819.164000] ACPI-0412: *** Error: Handler for [EmbeddedControl] returned AE_TIME Sep 24 22:36:41 localhost kernel: [17204819.164000] ACPI-0517: *** Error: Method parse/execution failed [\_SB_.BAT1._BST] (Node dffe2ee0), AE_TIME Sep 24 22:41:11 localhost kernel: [17205089.144000] ACPI-0412: *** Error: Handler for [EmbeddedControl] returned AE_TIME Sep 24 22:41:11 localhost kernel: [17205089.144000] ACPI-0517: *** Error: Method parse/execution failed [\_SB_.ACAD._PSR] (Node dffe2340), AE_TIME Sep 24 22:45:41 localhost kernel: [17205359.176000] ACPI-0412: *** Error: Handler for [EmbeddedControl] returned AE_TIME Sep 24 22:45:41 localhost kernel: [17205359.176000] ACPI-0517: *** Error: Method parse/execution failed [\_SB_.ACAD._PSR] (Node dffe2340), AE_TIME Sep 24 22:49:41 localhost kernel: [17205599.208000] ACPI-0412: *** Error: Handler for [EmbeddedControl] returned AE_TIME Sep 24 22:49:41 localhost kernel: [17205599.208000] ACPI-0517: *** Error: Method parse/execution failed [\_SB_.ACAD._PSR] (Node dffe2340), AE_TIME Sep 24 22:54:11 localhost kernel: [17205869.240000] ACPI-0412: *** Error: Handler for [EmbeddedControl] returned AE_TIME Sep 24 22:54:11 localhost kernel: [17205869.240000] ACPI-0517: *** Error: Method parse/execution failed [\_SB_.ACAD._PSR] (Node dffe2340), AE_TIME Sep 24 22:58:11 localhost kernel: [17206109.260000] ACPI-0412: *** Error: Handler for [EmbeddedControl] returned AE_TIME Sep 24 22:58:11 localhost kernel: [17206109.260000] ACPI-0517: *** Error: Method parse/execution failed [\_SB_.ACAD._PSR] (Node dffe2340), AE_TIME Sep 24 22:58:11 localhost kernel: [17206109.312000] ACPI-0412: *** Error: Handler for [EmbeddedControl] returned AE_TIME Sep 24 22:58:11 localhost kernel: [17206109.312000] ACPI-0517: *** Error: Method parse/execution failed [\_SB_.BAT1._BST] (Node dffe2ee0), AE_TIME Sep 24 23:02:41 localhost kernel: [17206379.292000] ACPI-0412: *** Error: Handler for [EmbeddedControl] returned AE_TIME Sep 24 23:02:41 localhost kernel: [17206379.292000] ACPI-0517: *** Error: Method parse/execution failed [\_SB_.ACAD._PSR] (Node dffe2340), AE_TIME Sep 24 23:06:42 localhost kernel: [17206619.384000] ACPI-0412: *** Error: Handler for [EmbeddedControl] returned AE_TIME Sep 24 23:06:42 localhost kernel: [17206619.384000] ACPI-0517: *** Error: Method parse/execution failed [\_SB_.BAT1.UPBS] (Node dffe2ea0), AE_TIME Sep 24 23:06:42 localhost kernel: [17206619.384000] ACPI-0517: *** Error: Method parse/execution failed [\_SB_.BAT1._BST] (Node dffe2ee0), AE_TIME Sep 24 23:07:12 localhost kernel: [17206649.328000] ACPI-0412: *** Error: Handler for [EmbeddedControl] returned AE_TIME Sep 24 23:07:12 localhost kernel: [17206649.328000] ACPI-0517: *** Error: Method parse/execution failed [\_SB_.ACAD._PSR] (Node dffe2340), AE_TIME Sep 24 23:11:12 localhost kernel: [17206889.360000] ACPI-0412: *** Error: Handler for [EmbeddedControl] returned AE_TIME Sep 24 23:11:12 localhost kernel: [17206889.360000] ACPI-0517: *** Error: Method parse/execution failed [\_SB_.ACAD._PSR] (Node dffe2340), AE_TIME Sep 24 23:11:12 localhost kernel: [17206889.412000] ACPI-0412: *** Error: Handler for [EmbeddedControl] returned AE_TIME Sep 24 23:11:12 localhost kernel: [17206889.412000] ACPI-0517: *** Error: Method parse/execution failed [\_SB_.BAT1._BST] (Node dffe2ee0), AE_TIME Sep 24 23:15:42 localhost kernel: [17207159.388000] ACPI-0412: *** Error: Handler for [EmbeddedControl] returned AE_TIME Sep 24 23:15:42 localhost kernel: [17207159.388000] ACPI-0517: *** Error: Method parse/execution failed [\_SB_.ACAD._PSR] (Node dffe2340), AE_TIME Sep 24 23:19:42 localhost kernel: [17207399.420000] ACPI-0412: *** Error: Handler for [EmbeddedControl] returned AE_TIME Sep 24 23:19:42 localhost kernel: [17207399.420000] ACPI-0517: *** Error: Method parse/execution failed [\_SB_.ACAD._PSR] (Node dffe2340), AE_TIME Sep 24 23:19:42 localhost kernel: [17207399.472000] ACPI-0412: *** Error: Handler for [EmbeddedControl] returned AE_TIME Sep 24 23:19:42 localhost kernel: [17207399.472000] ACPI-0517: *** Error: Method parse/execution failed [\_SB_.BAT1._BST] (Node dffe2ee0), AE_TIME Sep 24 23:20:12 localhost kernel: [17207429.424000] ACPI-0412: *** Error: Handler for [EmbeddedControl] returned AE_TIME Sep 24 23:20:12 localhost kernel: [17207429.424000] ACPI-0517: *** Error: Method parse/execution failed [\_SB_.ACAD._PSR] (Node dffe2340), AE_TIME Sep 24 23:24:12 localhost kernel: [17207669.456000] ACPI-0412: *** Error: Handler for [EmbeddedControl] returned AE_TIME Sep 24 23:24:12 localhost kernel: [17207669.456000] ACPI-0517: *** Error: Method parse/execution failed [\_SB_.ACAD._PSR] (Node dffe2340), AE_TIME Sep 24 23:24:12 localhost kernel: [17207669.508000] ACPI-0412: *** Error: Handler for [EmbeddedControl] returned AE_TIME Sep 24 23:24:12 localhost kernel: [17207669.508000] ACPI-0517: *** Error: Method parse/execution failed [\_SB_.BAT1._BST] (Node dffe2ee0), AE_TIME Sep 24 23:25:12 localhost kernel: [17207729.464000] ACPI-0412: *** Error: Handler for [EmbeddedControl] returned AE_TIME Sep 24 23:25:12 localhost kernel: [17207729.464000] ACPI-0517: *** Error: Method parse/execution failed [\_SB_.ACAD._PSR] (Node dffe2340), AE_TIME Sep 24 23:25:42 localhost kernel: [17207759.468000] ACPI-0412: *** Error: Handler for [EmbeddedControl] returned AE_TIME Sep 24 23:25:42 localhost kernel: [17207759.468000] ACPI-0517: *** Error: Method parse/execution failed [\_SB_.ACAD._PSR] (Node dffe2340), AE_TIME Sep 24 23:29:07 localhost kernel: [17207964.332000] usb 1-2: new low speed USB device using uhci_hcd and address 4 Sep 24 23:29:07 localhost kernel: [17207964.504000] input: HID 046a:0004 as /class/input/input4 Sep 24 23:29:07 localhost kernel: [17207964.504000] input: USB HID v1.10 Keyboard [HID 046a:0004] on usb-0000:00:1d.0-2 Sep 24 23:29:07 localhost kernel: [17207964.528000] input: HID 046a:0004 as /class/input/input5 Sep 24 23:29:07 localhost kernel: [17207964.528000] input: USB HID v1.10 Device [HID 046a:0004] on usb-0000:00:1d.0-2 Sep 24 23:30:12 localhost kernel: [17208029.500000] ACPI-0412: *** Error: Handler for [EmbeddedControl] returned AE_TIME Sep 24 23:30:12 localhost kernel: [17208029.500000] ACPI-0517: *** Error: Method parse/execution failed [\_SB_.ACAD._PSR] (Node dffe2340), AE_TIME Sep 24 23:35:12 localhost kernel: [17208329.604000] ACPI-0412: *** Error: Handler for [EmbeddedControl] returned AE_TIME Sep 24 23:35:12 localhost kernel: [17208329.604000] ACPI-0517: *** Error: Method parse/execution failed [\_SB_.BAT1.UPBS] (Node dffe2ea0), AE_TIME Sep 24 23:35:12 localhost kernel: [17208329.604000] ACPI-0517: *** Error: Method parse/execution failed [\_SB_.BAT1._BST] (Node dffe2ee0), AE_TIME Sep 24 23:35:42 localhost kernel: [17208359.548000] ACPI-0412: *** Error: Handler for [EmbeddedControl] returned AE_TIME Sep 24 23:35:42 localhost kernel: [17208359.548000] ACPI-0517: *** Error: Method parse/execution failed [\_SB_.ACAD._PSR] (Node dffe2340), AE_TIME Sep 24 23:37:55 localhost shutdown[13129]: shutting down for system reboot ** Affects: linux-source-2.6.15 (Ubuntu) Importance: Untriaged Status: Unconfirmed -- 2.6.15-27 (-686) has problems with my keyboard https://launchpad.net/bugs/62222 From axl000 at gmail.com Mon Sep 25 00:17:39 2006 From: axl000 at gmail.com (Rodrigo Olivares) Date: Mon, 25 Sep 2006 00:17:39 -0000 Subject: [Bug 37975] Re: Unknown "Conexant id 31" mixer fails to produce audible volume References: <20060404060657.23082.46696.malonedeb@gandwana.ubuntu.com> Message-ID: <20060925001739.17562.70292.malone@gandwana.ubuntu.com> any advance? -- Unknown "Conexant id 31" mixer fails to produce audible volume https://launchpad.net/bugs/37975 From stephenemslie at gmail.com Mon Sep 25 00:30:46 2006 From: stephenemslie at gmail.com (Stephen Emslie) Date: Mon, 25 Sep 2006 00:30:46 -0000 Subject: [Bug 37975] Re: [Bug 37975] Re: Unknown "Conexant id 31" mixer fails to produce audible volume References: <20060404060657.23082.46696.malonedeb@gandwana.ubuntu.com> <20060925001739.17562.70292.malone@gandwana.ubuntu.com> Message-ID: <51f97e530609241730r155de4c7s9b5286b31df16182@mail.gmail.com> wow... are you psychic? I am literally working on this RIGHT now! Thats both amazing and kind of creepy. Anyway, the short answer is yes and no. I've bought a cheapo usb sound card (the kind with the sound jacks in the back) and I've found that the latest dapper upgrades detect that nicely. Then if I use the alsa packages from edgy I sort of get sound. I say sort of because I broke my system so badly installing edgy that I had to reinstall before I really experimented yet. I'll probably get just the alsa packages from edgy next and see how that works. I hope that helps at least a little bit :) Stephen On 9/25/06, Rodrigo Olivares wrote: > > any advance? > > -- > Unknown "Conexant id 31" mixer fails to produce audible volume > https://launchpad.net/bugs/37975 > -- Unknown "Conexant id 31" mixer fails to produce audible volume https://launchpad.net/bugs/37975 From tareqak at hotmail.com Mon Sep 25 01:27:49 2006 From: tareqak at hotmail.com (Tareq A. Khandaker) Date: Mon, 25 Sep 2006 01:27:49 -0000 Subject: [Bug 62236] warning: UTS_RELEASE has moved to utsrelease.h References: <20060925012749.17562.64853.malonedeb@gandwana.ubuntu.com> Message-ID: <20060925012749.17562.64853.malonedeb@gandwana.ubuntu.com> Public bug reported: Binary package hint: kernel-package Basically, compiling kernel 2.6.18 results in an error: "UTS Release version does not match current version". This happens because UTS_RELEASE has moved to utsrelease.h.. This is not a bug at the moment; however, it affects the upstream (Debian) maintainers as well. As such, they may or may not know about it already. Right now, a solution is given here: http://threebit.net/mail-archive /linux-kernel/msg01326.html. It will probably be easy to fix, but a heads-up seems necessary since the current Edgy kernel is not too far away from hitting 2.6.18. ** Affects: kernel-package (Ubuntu) Importance: Untriaged Status: Unconfirmed -- warning: UTS_RELEASE has moved to utsrelease.h https://launchpad.net/bugs/62236 From nkbj at mail.tele.dk Mon Sep 25 05:45:53 2006 From: nkbj at mail.tele.dk (Niels Kristian Bech Jensen) Date: Mon, 25 Sep 2006 05:45:53 -0000 Subject: [Bug 62236] Re: warning: UTS_RELEASE has moved to utsrelease.h References: <20060925012749.17562.64853.malonedeb@gandwana.ubuntu.com> Message-ID: <20060925054554.17562.466.launchpad@gandwana.ubuntu.com> *** This bug is a duplicate of bug 58570 *** ** This bug has been marked a duplicate of bug 58570 kernel_image target fails with kernel 2.6.18-rc -- warning: UTS_RELEASE has moved to utsrelease.h https://launchpad.net/bugs/62236 From nkbj at mail.tele.dk Mon Sep 25 05:45:53 2006 From: nkbj at mail.tele.dk (Niels Kristian Bech Jensen) Date: Mon, 25 Sep 2006 05:45:53 -0000 Subject: [Bug 58570] Re: kernel_image target fails with kernel 2.6.18-rc References: <20060902121437.30936.48954.malonedeb@gandwana.ubuntu.com> Message-ID: <20060925054554.17562.90035.launchpad@gandwana.ubuntu.com> ** Bug 62236 has been marked a duplicate of this bug -- kernel_image target fails with kernel 2.6.18-rc https://launchpad.net/bugs/58570 From caroline.ford.work at googlemail.com Mon Sep 25 13:24:44 2006 From: caroline.ford.work at googlemail.com (Caroline Ford) Date: Mon, 25 Sep 2006 13:24:44 -0000 Subject: [Bug 62248] Re: kernel-image-2.6.17-9-amd64-generic panics on boot References: <20060925054120.23105.73999.malonedeb@gangotri.ubuntu.com> Message-ID: <20060925132444.17606.27000.launchpad@gandwana.ubuntu.com> *** This bug is a duplicate of bug 42909 *** ** This bug has been marked a duplicate of bug 42909 kernel panic at boot -- kernel-image-2.6.17-9-amd64-generic panics on boot https://launchpad.net/bugs/62248 From caroline.ford.work at googlemail.com Mon Sep 25 13:24:44 2006 From: caroline.ford.work at googlemail.com (Caroline Ford) Date: Mon, 25 Sep 2006 13:24:44 -0000 Subject: [Bug 42909] Re: kernel panic at boot References: <20060504095810.7739.24400.malonedeb@gangotri.ubuntu.com> Message-ID: <20060925132444.17606.75917.launchpad@gandwana.ubuntu.com> ** Bug 62248 has been marked a duplicate of this bug -- kernel panic at boot https://launchpad.net/bugs/42909 From seb128 at ubuntu.com Mon Sep 25 14:25:04 2006 From: seb128 at ubuntu.com (Sebastien Bacher) Date: Mon, 25 Sep 2006 14:25:04 -0000 Subject: [Bug 16454] Re: sound still comes out of speakers when PCM volume is set to 0 References: <20060113134639.21012.49160.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060925142504.17606.40378.launchpad@gandwana.ubuntu.com> ** Bug 62226 has been marked a duplicate of this bug -- sound still comes out of speakers when PCM volume is set to 0 https://launchpad.net/bugs/16454 From sfllaw at ubuntu.com Mon Sep 25 14:20:55 2006 From: sfllaw at ubuntu.com (Simon Law) Date: Mon, 25 Sep 2006 14:20:55 -0000 Subject: [Bug 48395] Re: ipw3945 produces 99% cpu, making my laptop unusable References: <20060604183717.4978.25428.malonedeb@gandwana.ubuntu.com> Message-ID: <20060925142055.17562.85949.malone@gandwana.ubuntu.com> It looks like your Cisco wireless access point is tripping a firmware bug. -- ipw3945 produces 99% cpu, making my laptop unusable https://launchpad.net/bugs/48395 From sieni at kolumbus.fi Mon Sep 25 14:28:34 2006 From: sieni at kolumbus.fi (Jouni Nieminen) Date: Mon, 25 Sep 2006 14:28:34 -0000 Subject: [Bug 62126] Re: System freezes (responsive only to alt-sysrq) References: <20060924061641.17606.39946.malonedeb@gandwana.ubuntu.com> Message-ID: <20060925142834.23105.67558.malone@gangotri.ubuntu.com> Oh yes, in fact, I did have JRE running self-made IRC-bot. My java -version: java version "1.5.0_06" Java(TM) 2 Runtime Environment, Standard Edition (build 1.5.0_06-b05) Java HotSpot(TM) Client VM (build 1.5.0_06-b05, mixed mode, sharing) -- System freezes (responsive only to alt-sysrq) https://launchpad.net/bugs/62126 From seb128 at ubuntu.com Mon Sep 25 14:28:42 2006 From: seb128 at ubuntu.com (Sebastien Bacher) Date: Mon, 25 Sep 2006 14:28:42 -0000 Subject: [Bug 30038] Re: SmartBattery load level not shown References: <20060130060628.26274.39548.malonedeb@gangotri.ubuntu.com> Message-ID: <20060925142842.17562.25114.malone@gandwana.ubuntu.com> was not a gnome-applets issue apparently ** Changed in: gnome-applets (Ubuntu) Status: Unconfirmed => Rejected -- SmartBattery load level not shown https://launchpad.net/bugs/30038 From seb128 at ubuntu.com Mon Sep 25 14:24:56 2006 From: seb128 at ubuntu.com (Sebastien Bacher) Date: Mon, 25 Sep 2006 14:24:56 -0000 Subject: [Bug 62226] Re: Mixer claims "muted" and I still receive sound References: <20060924225306.17562.13594.malonedeb@gandwana.ubuntu.com> Message-ID: <20060925142456.23036.22933.malone@gangotri.ubuntu.com> *** This bug is a duplicate of bug 16454 *** Thanks for your bug. That looks like the same issue than bug #16454, marking as duplicate. Feel free to reopen if you think that's wrong ** Changed in: gnome-applets (Ubuntu) Assignee: (unassigned) => Ubuntu Desktop Bugs Status: Unconfirmed => Rejected ** This bug has been marked a duplicate of bug 16454 sound still comes out of speakers when PCM volume is set to 0 ** Changed in: gnome-applets (Ubuntu) Importance: Untriaged => Low -- Mixer claims "muted" and I still receive sound https://launchpad.net/bugs/62226 From seb128 at ubuntu.com Mon Sep 25 14:28:53 2006 From: seb128 at ubuntu.com (Sebastien Bacher) Date: Mon, 25 Sep 2006 14:28:53 -0000 Subject: [Bug 30038] Re: SmartBattery load level not shown References: <20060130060628.26274.39548.malonedeb@gangotri.ubuntu.com> Message-ID: <20060925142853.23105.78837.malone@gangotri.ubuntu.com> nor hal upstream bug ** Changed in: hal (upstream) Status: Unconfirmed => Rejected -- SmartBattery load level not shown https://launchpad.net/bugs/30038 From manuellopezibanez at yahoo.es Mon Sep 25 14:40:30 2006 From: manuellopezibanez at yahoo.es (manu) Date: Mon, 25 Sep 2006 14:40:30 -0000 Subject: [Bug 16454] Re: sound still comes out of speakers when PCM volume is set to 0 References: <20060113134639.21012.49160.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060925144030.23105.8350.malone@gangotri.ubuntu.com> This is still valid in Dapper. I am using Kubuntu now and by setting either Master or PCM to zero and the other to a high value, I still hear sound coming throught PCM. If Master is zero I shouldn't hear anything, no matter what level PCM is. If PCM is zero I shouldn't hear any PCM sound, no matter what level Master is. -- sound still comes out of speakers when PCM volume is set to 0 https://launchpad.net/bugs/16454 From pgoetz at mail.utexas.edu Mon Sep 25 16:29:15 2006 From: pgoetz at mail.utexas.edu (Patrick Goetz) Date: Mon, 25 Sep 2006 16:29:15 -0000 Subject: [Bug 34515] Re: Dapper Flight 5 kernel panic on boot References: <20060311223807.17044.41100.malonedeb@gangotri.ubuntu.com> Message-ID: <20060925162915.17606.2176.malone@gandwana.ubuntu.com> I was having similar problems (kernel panic when trying to install) with a dual Opteron system, and actually tried every AMD/i386 version of Dapper. The 21-Sep-2006 build of Edgy appears to install fine, though. -- Dapper Flight 5 kernel panic on boot https://launchpad.net/bugs/34515 From roshan.shariff at gmail.com Mon Sep 25 16:41:37 2006 From: roshan.shariff at gmail.com (Roshan Shariff) Date: Mon, 25 Sep 2006 16:41:37 -0000 Subject: [Bug 45636] Re: dapper on toshiba sat. m70: gnome immediately freezes with new kernels (incl. 2.6.15-23-386/686) References: <20060519181444.18604.677.malonedeb@gandwana.ubuntu.com> Message-ID: <20060925164137.23105.59606.launchpad@gangotri.ubuntu.com> ** Bug 62248 has been marked a duplicate of this bug ** Bug 42909 has been marked a duplicate of this bug -- dapper on toshiba sat. m70: gnome immediately freezes with new kernels (incl. 2.6.15-23-386/686) https://launchpad.net/bugs/45636 From roshan.shariff at gmail.com Mon Sep 25 16:44:57 2006 From: roshan.shariff at gmail.com (Roshan Shariff) Date: Mon, 25 Sep 2006 16:44:57 -0000 Subject: [Bug 42909] Re: kernel panic at boot References: <20060504095810.7739.24400.malonedeb@gangotri.ubuntu.com> Message-ID: <20060925164457.23036.38508.malone@gangotri.ubuntu.com> *** This bug is a duplicate of bug 45636 *** I'm marking this as a duplicate of bug #45636 rather than vice versa because that bug contains more info and a workaround (https://launchpad.net/distros/ubuntu/+source/linux- source-2.6.15/+bug/45636/comments/10) ** This bug has been marked a duplicate of bug 45636 dapper on toshiba sat. m70: gnome immediately freezes with new kernels (incl. 2.6.15-23-386/686) -- kernel panic at boot https://launchpad.net/bugs/42909 From roshan.shariff at gmail.com Mon Sep 25 16:41:37 2006 From: roshan.shariff at gmail.com (Roshan Shariff) Date: Mon, 25 Sep 2006 16:41:37 -0000 Subject: [Bug 62248] Re: kernel-image-2.6.17-9-amd64-generic panics on boot References: <20060925054120.23105.73999.malonedeb@gangotri.ubuntu.com> Message-ID: <20060925164137.23105.81170.launchpad@gangotri.ubuntu.com> *** This bug is a duplicate of bug 45636 *** ** This bug is no longer a duplicate of bug 42909 kernel panic at boot ** This bug has been marked a duplicate of bug 45636 dapper on toshiba sat. m70: gnome immediately freezes with new kernels (incl. 2.6.15-23-386/686) -- kernel-image-2.6.17-9-amd64-generic panics on boot https://launchpad.net/bugs/62248 From susancragin at earthlink.net Mon Sep 25 17:03:27 2006 From: susancragin at earthlink.net (susancragin) Date: Mon, 25 Sep 2006 17:03:27 -0000 Subject: [Bug 38263] Re: freeze at startup References: <20060405194706.24486.46138.malonedeb@gangotri.ubuntu.com> Message-ID: <20060925170327.17562.98446.malone@gandwana.ubuntu.com> As of Edgy kernel 2.6.17.9.23 on AMD64, the bootup error message flashes the following message: 8254 timer not connected and then goes very slowly and grinds to a halt with the following message: [22.xxxxxx] irq 233: nobody cared (try booting with the "irqpoll" option [22.xxxxxx] handlers: [22.xxxxxx] [] (ohchi_irq_handler*0x0/0x7ff [ochi 1394] [22.xxxxxx] Disabling IRQ #233 and then starts again. I was told on a MEPIS web site that my problem MIGHT be PARTLY that my BIOS should be upgraded from S3A19 to 3A23, but I have not tried this yet. -- freeze at startup https://launchpad.net/bugs/38263 From Maxamillion at gmail.com Mon Sep 25 18:21:08 2006 From: Maxamillion at gmail.com (Adam Miller) Date: Mon, 25 Sep 2006 18:21:08 -0000 Subject: [Bug 62248] Re: [Bug 62248] Re: kernel-image-2.6.17-9-amd64-generic panics on boot References: <20060925054120.23105.73999.malonedeb@gangotri.ubuntu.com> <20060925164137.23105.81170.launchpad@gangotri.ubuntu.com> Message-ID: *** This bug is a duplicate of bug 45636 *** sorry for the duplicate, i searched around LP looking for it first, but i apparently over looked it. my apologies. -Adam On 9/25/06, Roshan Shariff wrote: > > *** This bug is a duplicate of bug 45636 *** > > ** This bug is no longer a duplicate of bug 42909 > kernel panic at boot > > ** This bug has been marked a duplicate of bug 45636 > dapper on toshiba sat. m70: gnome immediately freezes with new kernels > (incl. 2.6.15-23-386/686) > > -- > kernel-image-2.6.17-9-amd64-generic panics on boot > https://launchpad.net/bugs/62248 > -- -=:Max:=- -- kernel-image-2.6.17-9-amd64-generic panics on boot https://launchpad.net/bugs/62248 From roshan.shariff at gmail.com Mon Sep 25 18:38:55 2006 From: roshan.shariff at gmail.com (Roshan Shariff) Date: Mon, 25 Sep 2006 18:38:55 -0000 Subject: [Bug 62248] Re: [Bug 62248] Re: [Bug 62248] Re: kernel-image-2.6.17-9-amd64-generic panics on boot References: <20060925054120.23105.73999.malonedeb@gangotri.ubuntu.com> <20060925164137.23105.81170.launchpad@gangotri.ubuntu.com> Message-ID: *** This bug is a duplicate of bug 45636 *** It's only a duplicate if your circumstances match those in bug #45636 (laptop with SATA hard drive, probably Toshiba Satellite M20). If your problem is different, please unmark the "duplicate" flag and give more details. In any case, you might want to test Edgy and see if the kernel panic is resolved. -- kernel-image-2.6.17-9-amd64-generic panics on boot https://launchpad.net/bugs/62248 From sfllaw at ubuntu.com Mon Sep 25 18:46:26 2006 From: sfllaw at ubuntu.com (Simon Law) Date: Mon, 25 Sep 2006 18:46:26 -0000 Subject: [Bug 34752] Re: [atmel] breezy->dapper wifi lost: signal power to 0 References: <20060313122743.17044.67675.malonedeb@gangotri.ubuntu.com> Message-ID: <20060925184626.23105.24372.malone@gangotri.ubuntu.com> I'm just removing a redundant bug task. ** Changed in: Ubuntu Importance: Medium => Untriaged Status: Unconfirmed => Rejected -- [atmel] breezy->dapper wifi lost: signal power to 0 https://launchpad.net/bugs/34752 From bernat.tallaferro at gmail.com Mon Sep 25 19:18:04 2006 From: bernat.tallaferro at gmail.com (Bernat Tallaferro) Date: Mon, 25 Sep 2006 19:18:04 -0000 Subject: [Bug 46314] Re: after recent update 3d acceleration with savage does not work References: <20060524110645.23797.61934.malonedeb@gandwana.ubuntu.com> Message-ID: <20060925191804.17606.94496.malone@gandwana.ubuntu.com> I can confirm this on my system, using an S3 Inc. 86C380 [ProSavageDDR K4M266] (rev 02), which according to Xorg.0.log is a "Twister PN133", Chip: id 8d01. After asking at the xorg mailing list, they directed me to the bug Marcelo Shima was pointing out on his last comment. I can also run glxinfo, but executing glxgears results in a black window and 100% CPU usage. So basically, it seems that the DRI locking was broken in the driver, and that that has now been fixed upstream using the following patch: https://bugs.freedesktop.org/attachment.cgi?id=7041 (see the bug report for more information) ** Also affects: linux-source-2.6.17 (Ubuntu) Importance: Untriaged Status: Unconfirmed -- after recent update 3d acceleration with savage does not work https://launchpad.net/bugs/46314 From Maxamillion at gmail.com Mon Sep 25 19:57:45 2006 From: Maxamillion at gmail.com (Adam Miller) Date: Mon, 25 Sep 2006 19:57:45 -0000 Subject: [Bug 62248] Re: [Bug 62248] Re: [Bug 62248] Re: [Bug 62248] Re: kernel-image-2.6.17-9-amd64-generic panics on boot References: <20060925054120.23105.73999.malonedeb@gangotri.ubuntu.com> <20060925164137.23105.81170.launchpad@gangotri.ubuntu.com> Message-ID: *** This bug is a duplicate of bug 45636 *** I am running edgy, its a desktop AMD64 3200+ ... should I be posting else where for edgy testing? -Adam On 9/25/06, Roshan Shariff wrote: > > *** This bug is a duplicate of bug 45636 *** > > It's only a duplicate if your circumstances match those in bug #45636 > (laptop with SATA hard drive, probably Toshiba Satellite M20). If your > problem is different, please unmark the "duplicate" flag and give more > details. In any case, you might want to test Edgy and see if the > kernel panic is resolved. > > -- > kernel-image-2.6.17-9-amd64-generic panics on boot > https://launchpad.net/bugs/62248 > -- -=:Max:=- -- kernel-image-2.6.17-9-amd64-generic panics on boot https://launchpad.net/bugs/62248 From karvinen+launchpad at iki.fi Mon Sep 25 20:10:22 2006 From: karvinen+launchpad at iki.fi (Tero Karvinen) Date: Mon, 25 Sep 2006 20:10:22 -0000 Subject: [Bug 30038] Re: SmartBattery load level not shown References: <20060130060628.26274.39548.malonedeb@gangotri.ubuntu.com> Message-ID: <20060925201022.17606.85830.malone@gandwana.ubuntu.com> Battery load level is shown now, thanks for the bugfix (where ever it was). There are still sometimes delays in seeing power connect/disconnect and problems with Gnome critical power level detection, but they are a different issue. As the original reporter of the bug, I confirm that this is now fixed. Thanks! -- SmartBattery load level not shown https://launchpad.net/bugs/30038 From ubuntu at laurenssimonis.com Mon Sep 25 20:48:51 2006 From: ubuntu at laurenssimonis.com (Laurens Simonis) Date: Mon, 25 Sep 2006 20:48:51 -0000 Subject: [Bug 36596] Re: system freeze after clicking task manager trash icon in "pan" newsreader References: <20060325145711.6279.38615.malonedeb@gandwana.ubuntu.com> Message-ID: <20060925204851.17606.55560.malone@gandwana.ubuntu.com> I just installed the 2 patches which I had downloaded before your (Paul's) site went down, the kernel (I hadn't updated yet to the -27 kernel which is currently availible), and the xserver ati-package, but it crashed the same way it did without them, unfortunately. FYI, I'm running 24 bit. I've updated to the currenlty available kernel & drivers, see if that's any better. I also intend to try the Edgy beta cd soon. -- system freeze after clicking task manager trash icon in "pan" newsreader https://launchpad.net/bugs/36596 From fab at gnux.info Mon Sep 25 21:28:42 2006 From: fab at gnux.info (fab) Date: Mon, 25 Sep 2006 21:28:42 -0000 Subject: [Bug 38865] Re: [Bug 38865] Re: sky2 driver freezing system after ifdown and ifup References: <20060409125752.32313.97119.malonedeb@gandwana.ubuntu.com> <20060918203758.28941.14369.malone@gandwana.ubuntu.com> Message-ID: <20060925212841.GA20809@blackmilk.localzone.fr> I just want to advertise with actual kernel sky2 driver is still not working (stops transfering data under high load, even if I disable autonegociation). But, sk98lin driver loads and works like a charm (unlike before). BTW, Thanks for your work. Fabien Devaux. -- sky2 driver freezing system after ifdown and ifup https://launchpad.net/bugs/38865 From seb128 at ubuntu.com Mon Sep 25 21:34:18 2006 From: seb128 at ubuntu.com (Sebastien Bacher) Date: Mon, 25 Sep 2006 21:34:18 -0000 Subject: [Bug 30038] Re: SmartBattery load level not shown References: <20060130060628.26274.39548.malonedeb@gangotri.ubuntu.com> Message-ID: <20060925213418.17606.80352.malone@gandwana.ubuntu.com> thank you for the comment update -- SmartBattery load level not shown https://launchpad.net/bugs/30038 From mjg59 at codon.org.uk Mon Sep 25 22:27:55 2006 From: mjg59 at codon.org.uk (Matthew Garrett) Date: Mon, 25 Sep 2006 22:27:55 -0000 Subject: [Bug 38263] Re: [Bug 38263] Re: freeze at startup References: <20060405194706.24486.46138.malonedeb@gangotri.ubuntu.com> <20060925170327.17562.98446.malone@gandwana.ubuntu.com> Message-ID: <20060925222755.GA10090@srcf.ucam.org> That message on its own isn't necessarily a problem. Can you boot in rescue mode and see if there's any other relevant looking output? -- Matthew Garrett | mjg59 at srcf.ucam.org -- freeze at startup https://launchpad.net/bugs/38263 From ben.collins at ubuntu.com Tue Sep 26 00:17:01 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Tue, 26 Sep 2006 00:17:01 -0000 Subject: [Bug 57502] Re: JMicron PATA/SATA Controller does not work References: <20060823192235.13463.13121.malonedeb@gandwana.ubuntu.com> Message-ID: <20060926001701.17562.63886.launchpad@gandwana.ubuntu.com> ** Changed in: linux-source-2.6.17 (Ubuntu) Target: None => ubuntu-6.10-beta ** Changed in: linux-source-2.6.17 (Ubuntu) Importance: Medium => High -- JMicron PATA/SATA Controller does not work https://launchpad.net/bugs/57502 From matt at astronomydaily.com Tue Sep 26 02:27:55 2006 From: matt at astronomydaily.com (Matt Marulla) Date: Tue, 26 Sep 2006 02:27:55 -0000 Subject: [Bug 49450] Re: 2.6.15-23-686 hangs a couple of times per week References: <20060612112731.25801.13769.malonedeb@gangotri.ubuntu.com> Message-ID: <20060926022755.23036.66259.malone@gangotri.ubuntu.com> Same problem. Machine is a PII x 2, Intel 440BX chipset, ATI Radeon 7000. Boots fine and is stable on 386 kernel, and on 2.6.15-23-686, 2.6.15-25-686, and 2.6.15-27-686 but only with the MAXCPUS=1 directive. If allowed to boot without that directive; i.e., if allowed to go SMP, it crashes hard (complete lock-up requiring a power cycle) within 5 minutes. Memory tests good and machine ran fine with both processor for several years under WinXP. No obvious clues in the log files, but I have not exhaustively searched them all yet. -- 2.6.15-23-686 hangs a couple of times per week https://launchpad.net/bugs/49450 From andrew.conkling at gmail.com Tue Sep 26 03:02:56 2006 From: andrew.conkling at gmail.com (Andrew Conkling) Date: Tue, 26 Sep 2006 03:02:56 -0000 Subject: [Bug 23982] Re: No sound with headphone connected at boot with ES1988 Allegro-1 References: <20060113142645.21012.92923.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060926030256.23036.94237.malone@gangotri.ubuntu.com> Closing: no comments. Feel free to reopen. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Needs Info => Fix Released -- No sound with headphone connected at boot with ES1988 Allegro-1 https://launchpad.net/bugs/23982 From andrew.conkling at gmail.com Tue Sep 26 03:09:53 2006 From: andrew.conkling at gmail.com (Andrew Conkling) Date: Tue, 26 Sep 2006 03:09:53 -0000 Subject: [Bug 42381] Re: Build-in speakers don't get muted when headphones are plugged References: <20060501133429.30606.41151.malonedeb@gangotri.ubuntu.com> Message-ID: <20060926030953.17606.88836.malone@gandwana.ubuntu.com> Is this related to and/or a duplicate of either bug #37055 or bug #37409? -- Build-in speakers don't get muted when headphones are plugged https://launchpad.net/bugs/42381 From andrew.conkling at gmail.com Tue Sep 26 03:17:22 2006 From: andrew.conkling at gmail.com (Andrew Conkling) Date: Tue, 26 Sep 2006 03:17:22 -0000 Subject: [Bug 42194] Re: Volume hotkeys do not control correct mixer element References: <20060430072115.16739.56302.malonedeb@gandwana.ubuntu.com> Message-ID: <20060926031722.17562.5983.malone@gandwana.ubuntu.com> Is this related to bug #26150? It seems to be the same issue; one can hope it's also the same fix. :) -- Volume hotkeys do not control correct mixer element https://launchpad.net/bugs/42194 From andrew.conkling at gmail.com Tue Sep 26 03:20:37 2006 From: andrew.conkling at gmail.com (Andrew Conkling) Date: Tue, 26 Sep 2006 03:20:37 -0000 Subject: [Bug 45167] Re: snd_hda: Default mixer channel is PCM instead of Front References: <20060517030521.15819.80093.malonedeb@gangotri.ubuntu.com> Message-ID: <20060926032037.23036.36039.malone@gangotri.ubuntu.com> Is this a duplicate of bug #45167? -- snd_hda: Default mixer channel is PCM instead of Front https://launchpad.net/bugs/45167 From spam at twelve17.com Tue Sep 26 03:48:59 2006 From: spam at twelve17.com (twelve17) Date: Tue, 26 Sep 2006 03:48:59 -0000 Subject: [Bug 62399] irq 7: nobody cared (try booting with the "irqpoll" option) References: <20060926034859.23105.93679.malonedeb@gangotri.ubuntu.com> Message-ID: <20060926034859.23105.93679.malonedeb@gangotri.ubuntu.com> Public bug reported: Binary package hint: linux-headers-2.6.15-27-686 OS: Ubuntu 6.06.1 LTS Hardware: Shuttle SB75G2 motherboard (Intel 875 based) Audio Hardware: Intel ICH5 - snd_intel8x0 Some time after booting up, my sound stops working. I see the following message in the kernel log: Sep 22 10:33:50 localhost kernel: [17214565.236000] irq 7: nobody cared (try booting with the "irqpoll" option) Sep 22 10:33:50 localhost kernel: [17214565.236000] [__report_bad_irq+42/160] __report_bad_irq+0x2a/0xa0 Sep 22 10:33:50 localhost kernel: [17214565.236000] [handle_IRQ_event+61/112] handle_IRQ_event+0x3d/0x70 Sep 22 10:33:50 localhost kernel: [17214565.236000] [note_interrupt+135/240] note_interrupt+0x87/0xf0 Sep 22 10:33:50 localhost kernel: [17214565.236000] [__do_IRQ+253/272] __do_IRQ+0xfd/0x110 Sep 22 10:33:50 localhost kernel: [17214565.236000] [do_IRQ+25/48] do_IRQ+0x19/0x30 Sep 22 10:33:50 localhost kernel: [17214565.236000] [common_interrupt+26/32] common_interrupt+0x1a/0x20 Sep 22 10:33:50 localhost kernel: [17214565.236000] [mwait_idle+42/64] mwait_idle+0x2a/0x40 Sep 22 10:33:50 localhost kernel: [17214565.236000] [cpu_idle+111/192] cpu_idle+0x6f/0xc0 Sep 22 10:33:50 localhost kernel: [17214565.236000] [start_kernel+415/512] start_kernel+0x19f/0x200 Sep 22 10:33:50 localhost kernel: [17214565.236000] [unknown_bootoption+0/496] unknown_bootoption+0x0/0x1f0 Sep 22 10:33:50 localhost kernel: [17214565.236000] handlers: Sep 22 10:33:50 localhost kernel: [17214565.236000] [pg0+543238400/1069167616] (snd_intel8x0_interrupt+0x0/0x2a0 [snd_intel8x0]) Sep 22 10:33:50 localhost kernel: [17214565.236000] Disabling IRQ #7 I tried booting with the "irqpoll" option, but that causes other strange behavior (The drive appears confused (ireason = 0x01)). I then booted with these options: "acpi=debug pci=routeirq apic=debug". dmesg shows: Bad page state at free_hot_cold_page (in process 'aplay', page c13cff24) flags:0x80000414 mapping:00000000 mapcount:0 count:0 Backtrace: [] bad_page+0x87/0xc0 [] free_hot_cold_page+0x4c/0x140 [] zap_pte_range+0x258/0x310 [] unmap_page_range+0xf6/0x130 [] unmap_vmas+0xd0/0x250 [] unmap_region+0xb2/0x160 [] do_munmap+0x109/0x150 [] sys_munmap+0x51/0x80 [] sysenter_past_esp+0x54/0x75 Trying to fix it up, but a reboot is needed During a search, I found a message referencing a patch (http://lkml.org/lkml/2005/11/20/28). I installed the linux-source-2.6.15 package. I tried apply the patch from the email, but it appears that these sources already have that patch: root at foo:/usr/src# patch --dry-run -p0 -i patches-2.6.15/audio-mem.patch missing header for unified diff at line 3 of patch patching file linux/sound/core/memalloc.c Reversed (or previously applied) patch detected! Assume -R? [n] Apply anyway? [n] Skipping patch. 2 out of 2 hunks ignored -- saving rejects to file linux/sound/core/memalloc.c.rej I'm not sure if this matters, or if I'm looking in the right place, but /proc/interrupts seems to say that irq7 is not being shared: root at foo:/usr/src# cat /proc/interrupts | grep 7 7: 5355 XT-PIC Intel ICH5 Any help would be appreciated. Thanks, --Alex ** Affects: linux-source-2.6.15 (Ubuntu) Importance: Untriaged Status: Unconfirmed -- irq 7: nobody cared (try booting with the "irqpoll" option) https://launchpad.net/bugs/62399 From ben.collins at ubuntu.com Tue Sep 26 04:14:33 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Tue, 26 Sep 2006 04:14:33 -0000 Subject: [Bug 46314] Re: after recent update 3d acceleration with savage does not work References: <20060524110645.23797.61934.malonedeb@gandwana.ubuntu.com> Message-ID: <20060926041434.23036.29285.malone@gangotri.ubuntu.com> Sounds like a xorg problem then. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Unconfirmed => Rejected ** Changed in: linux-source-2.6.17 (Ubuntu) Status: Unconfirmed => Rejected -- after recent update 3d acceleration with savage does not work https://launchpad.net/bugs/46314 From ben.collins at ubuntu.com Tue Sep 26 04:16:19 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Tue, 26 Sep 2006 04:16:19 -0000 Subject: [Bug 38263] Re: freeze at startup References: <20060405194706.24486.46138.malonedeb@gangotri.ubuntu.com> Message-ID: <20060926041619.23105.12290.malone@gangotri.ubuntu.com> Also output from "lspci -vv" and "lspci -vvn" (attached, not pasted in comments) would be helpful to see what devices are on that IRQ (besides the firewire controller). -- freeze at startup https://launchpad.net/bugs/38263 From ben.collins at ubuntu.com Tue Sep 26 04:54:02 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Tue, 26 Sep 2006 04:54:02 -0000 Subject: =?utf-8?q?=5BBug_53813=5D_Re=3A_=28Solved=29kernel_doesn=C2=B4t_su?= =?utf-8?q?pport_Sony_dsc-w5_anymore?= References: <20060723110756.11169.28683.malonedeb@gandwana.ubuntu.com> Message-ID: <20060926045402.17606.25482.launchpad@gandwana.ubuntu.com> ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Unconfirmed => Fix Released -- (Solved)kernel doesn´t support Sony dsc-w5 anymore https://launchpad.net/bugs/53813 From john.dong at gmail.com Tue Sep 26 05:11:30 2006 From: john.dong at gmail.com (John Dong) Date: Tue, 26 Sep 2006 05:11:30 -0000 Subject: [Bug 45167] Re: snd_hda: Default mixer channel is PCM instead of Front References: <20060517030521.15819.80093.malonedeb@gangotri.ubuntu.com> Message-ID: <20060926051130.17562.43465.malone@gandwana.ubuntu.com> This is bug 45167.... :) -- snd_hda: Default mixer channel is PCM instead of Front https://launchpad.net/bugs/45167 From mb at gem.win.co.nz Tue Sep 26 06:04:27 2006 From: mb at gem.win.co.nz (Mario Becroft) Date: Tue, 26 Sep 2006 06:04:27 -0000 Subject: [Bug 21574] Re: sound gone after resuming from sleep on hp nx8220 References: <20060113141334.21012.43238.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060926060427.17606.81554.malone@gandwana.ubuntu.com> I checked the hardware on my HP nw8240 laptop and the problem occurs because after suspend to RAM, the 5V power supply to the audio power amp IC is turned off. This is *not* controlled by the amplifier power down pin of the AC97 codec as would usually be the case, so nothing you can do with the AC97 will fix the problem. Indeed, all the AC97 registers are the same before and after suspend. The audio controller PCI configuration space registers are also the same. Clearly, the nw8240 (and maybe other HP laptops) control the audio power amp power supply from somewhere else. I couldn't figure out physically where the signal comes from on the motherboard. I guess it has to do with the ACPI subsystem and the embedded controller-- but as I don't know much about this I am not able to debug it. I am not even sure whether the embedded controller is part of the Intel chipset, or a separate chip. I did play around with an adapted version of the kernel ibm_acpi module's ecdump utility to read and modify the embedded controller registers--but the best I could do by randomly tweaking the registers was crash my machine. Maybe someone who knows a bit about ACPI could suggest some productive ways of mapping out the hardware? Presumably other special features of the laptop, like the shock sensor, could also be accessed through ACPI if this could be figured out. It is important to note that this issue is almost certainly HP-specific and not related to the numerous other "no sound after resume" issues that people have, which are fixable by simply setting the AC97 codec registers correctly. It would be great if someone who is interested in this issue and knows something about ACPI and/or HP laptops could contact me so we could diagnose it. You can contact me on mb at gem.win.co.nz -- sound gone after resuming from sleep on hp nx8220 https://launchpad.net/bugs/21574 From joosep-georg.jarvemaa at eesti.ee Tue Sep 26 06:59:50 2006 From: joosep-georg.jarvemaa at eesti.ee (georg) Date: Tue, 26 Sep 2006 06:59:50 -0000 Subject: [Bug 62410] Use of uninitialized value in print References: <20060926065950.17562.73733.malonedeb@gandwana.ubuntu.com> Message-ID: <20060926065950.17562.73733.malonedeb@gandwana.ubuntu.com> Public bug reported: Installation of sun-java5-fonts gives the following output: Setting up sun-java5-fonts (1.5.0-06-1) ... Use of uninitialized value in print at /var/lib/defoma/scripts/gs.defoma line 108. Use of uninitialized value in print at /var/lib/defoma/scripts/gs.defoma line 108. Use of uninitialized value in print at /var/lib/defoma/scripts/gs.defoma line 108. Use of uninitialized value in print at /var/lib/defoma/scripts/gs.defoma line 108. Use of uninitialized value in print at /var/lib/defoma/scripts/gs.defoma line 108. Use of uninitialized value in print at /var/lib/defoma/scripts/gs.defoma line 108. Use of uninitialized value in print at /var/lib/defoma/scripts/gs.defoma line 108. Use of uninitialized value in print at /var/lib/defoma/scripts/gs.defoma line 108. ** Affects: linux-source-2.6.15 (Ubuntu) Importance: Untriaged Status: Unconfirmed -- Use of uninitialized value in print https://launchpad.net/bugs/62410 From joosep-georg.jarvemaa at eesti.ee Tue Sep 26 06:57:01 2006 From: joosep-georg.jarvemaa at eesti.ee (georg) Date: Tue, 26 Sep 2006 06:57:01 -0000 Subject: [Bug 62409] User hook script /sbin/update-grub failed References: <20060926065701.17562.37862.malonedeb@gandwana.ubuntu.com> Message-ID: <20060926065701.17562.37862.malonedeb@gandwana.ubuntu.com> Public bug reported: Binary package hint: linux-image-2.6.15-26-386 Upgrading from linux-image-2.6.15-26-386 2.6.15-26.46 to linux- image-2.6.15-26-386 (2.6.15-26.47) gives the following output: Preparing to replace linux-image-2.6.15-26-386 2.6.15-26.46 (using .../linux-image-2.6.15-26-386_2.6.15-26.47_i386.deb) ... The directory /lib/modules/2.6.15-26-386 still exists. Continuing as directed. Unpacking replacement linux-image-2.6.15-26-386 ... Searching for GRUB installation directory ... found: /boot/grub Testing for an existing GRUB menu.list file ... found: /boot/grub/menu.lst sed: -e avaldis #1, sümbol 45: Invalid range end sed: -e avaldis #1, sümbol 186: Invalid range end sed: -e avaldis #1, sümbol 186: Invalid range end User hook script /sbin/update-grub failed at /var/lib/dpkg/info/linux-image-2.6.15-26-386.postrm line 269. Setting up linux-image-2.6.15-26-386 (2.6.15-26.47) ... Not touching initrd symlinks since we are being reinstalled (2.6.15-26.46) Not updating image symbolic links since we are being updated (2.6.15-26.46) Searching for GRUB installation directory ... found: /boot/grub Testing for an existing GRUB menu.list file ... found: /boot/grub/menu.lst sed: -e avaldis #1, sümbol 45: Invalid range end sed: -e avaldis #1, sümbol 186: Invalid range end sed: -e avaldis #1, sümbol 186: Invalid range end User hook script /sbin/update-grub failed at /var/lib/dpkg/info/linux-image-2.6.15-26-386.postinst line 991. ** Affects: linux-source-2.6.15 (Ubuntu) Importance: Untriaged Status: Unconfirmed -- User hook script /sbin/update-grub failed https://launchpad.net/bugs/62409 From evil at g-house.de Tue Sep 26 06:56:05 2006 From: evil at g-house.de (Christian) Date: Tue, 26 Sep 2006 06:56:05 -0000 Subject: [Bug 32597] Re: Hang while booting References: <20060223120455.14968.80193.malonedeb@gangotri.ubuntu.com> Message-ID: <20060926065605.17562.79486.malone@gandwana.ubuntu.com> somehow "Dapper" (LTS) has been put on the machine (x86-64) and the issue has been resolved _here_. No apt-pinning involved, stock-ubuntu packages with ubuntu-kernel and/or latest vanilla (-git and -mm) are booting without any delays. Thanks, Christian. -- Hang while booting https://launchpad.net/bugs/32597 From lynoure at gmail.com Tue Sep 26 08:28:53 2006 From: lynoure at gmail.com (Lynoure Braakman) Date: Tue, 26 Sep 2006 08:28:53 -0000 Subject: [Bug 42381] Re: Build-in speakers don't get muted when headphones are plugged References: <20060501133429.30606.41151.malonedeb@gangotri.ubuntu.com> Message-ID: <20060926082853.5117.87582.malone@gangotri.ubuntu.com> Hard to tell, there is so little info on those other bugs, but yes, possibly -- Build-in speakers don't get muted when headphones are plugged https://launchpad.net/bugs/42381 From mumbly_58 at yahoo.fr Tue Sep 26 08:45:40 2006 From: mumbly_58 at yahoo.fr (Olivier Prieur) Date: Tue, 26 Sep 2006 08:45:40 -0000 Subject: [Bug 38263] Re: freeze at startup References: <20060405194706.24486.46138.malonedeb@gangotri.ubuntu.com> Message-ID: <20060926084540.5066.11639.malone@gangotri.ubuntu.com> Ubuntu edgy knot 3 - daily build (september 26th, 2006) FIXED !!! ...but still have the graphic problem (black screen event hough i have selected xforcevesa ... You can find in attachment a lspci-vv.txt file for my Acer Aspire 5024WLMI ** Attachment added: "lspci -vv" http://librarian.launchpad.net/4441427/lspci-vv.txt -- freeze at startup https://launchpad.net/bugs/38263 From mechko at gmx.de Tue Sep 26 09:30:29 2006 From: mechko at gmx.de (mechko) Date: Tue, 26 Sep 2006 09:30:29 -0000 Subject: [Bug 40561] Re: Problem with USB Mass Storage References: <20060421135712.30538.73448.malonedeb@gangotri.ubuntu.com> Message-ID: <20060926093029.10311.42008.malone@gandwana.ubuntu.com> I have the same problem with the w810i as marduk above. I also tried to make a new vfat-filesystem on /dev/sda1 or to remove module ehci_hcd, both with no success. Sometimes it helps to do a umount /dev/sda1 and using the eject-dialog of gnome only when this is done (takes a while, depends on the size of the copied files). Thanks and best regards, mechko -- Problem with USB Mass Storage https://launchpad.net/bugs/40561 From launchpad.20.wackelzahn at spamgourmet.com Tue Sep 26 09:50:23 2006 From: launchpad.20.wackelzahn at spamgourmet.com (arne steffens) Date: Tue, 26 Sep 2006 09:50:23 -0000 Subject: [Bug 57502] Re: JMicron PATA/SATA Controller does not work References: <20060823192235.13463.13121.malonedeb@gandwana.ubuntu.com> Message-ID: <20060926095023.5066.52340.malone@gangotri.ubuntu.com> the daily build of 9/26 with the -9-386 kernel doesn't work for me. (MSI P965 Neo-F) I tried the bootoptions irqpoll and all-generic-ide but they make no difference. -- JMicron PATA/SATA Controller does not work https://launchpad.net/bugs/57502 From ubuntu-launchpad at theplayboymansion.net Tue Sep 26 10:01:56 2006 From: ubuntu-launchpad at theplayboymansion.net (ph8) Date: Tue, 26 Sep 2006 10:01:56 -0000 Subject: [Bug 57502] Re: JMicron PATA/SATA Controller does not work References: <20060823192235.13463.13121.malonedeb@gandwana.ubuntu.com> Message-ID: <20060926100156.10311.14474.malone@gandwana.ubuntu.com> This is properly fixed (i'm told) in the -10 kernel which will take a few days (at least) to make its way into the debian-installer package and, from there, to a daily image. Would appreciate it if someone posted back here once tested as i'll be out of the country -- JMicron PATA/SATA Controller does not work https://launchpad.net/bugs/57502 From susancragin at earthlink.net Tue Sep 26 12:11:11 2006 From: susancragin at earthlink.net (susancragin) Date: Tue, 26 Sep 2006 12:11:11 -0000 Subject: [Bug 38263] Re: freeze at startup References: <20060405194706.24486.46138.malonedeb@gangotri.ubuntu.com> Message-ID: <20060926121111.10311.34894.malone@gandwana.ubuntu.com> Here is the lspci -vv ** Attachment added: "lspci -vv" http://librarian.launchpad.net/4441614/lspci%20-vv -- freeze at startup https://launchpad.net/bugs/38263 From susancragin at earthlink.net Tue Sep 26 12:14:36 2006 From: susancragin at earthlink.net (susancragin) Date: Tue, 26 Sep 2006 12:14:36 -0000 Subject: [Bug 38263] Re: freeze at startup References: <20060405194706.24486.46138.malonedeb@gangotri.ubuntu.com> Message-ID: <20060926121436.5066.14612.malone@gangotri.ubuntu.com> here is the lspci -vvn These files are from my Acer Ferrari. All Edgy updates current as of this moment. No other problems except that the kernel doesn't load the bcmw.... to run the wireless. But I'll report that elsewhere. ** Attachment added: "lspci -vvn" http://librarian.launchpad.net/4441617/lspci%20-vvn -- freeze at startup https://launchpad.net/bugs/38263 From badpenguin79 at hotmail.com Tue Sep 26 12:31:43 2006 From: badpenguin79 at hotmail.com (giovanni) Date: Tue, 26 Sep 2006 12:31:43 -0000 Subject: [Bug 62435] Audio runs slow and distorted when resume from suspension References: <20060926121517.5117.38629.malonedeb@gangotri.ubuntu.com> Message-ID: <20060926123143.10355.43144.launchpad@canonical@gandwana.ubuntu.com> Public bug reported: Binary package hint: acpi Hi at all, i'm using kubuntu 6.06 with 2.6.15-23-686 #SMP kernel. I have a problem with suspension. When i suspend my laptop, on resume audio seems to run very slowly and with distorsion. Instead with hibernation is all ok. I dont know if this is a problem related to acpi or with alsa driver or other. Any idea? ** Affects: linux-source-2.6.15 (Ubuntu) Importance: Undecided Status: Unconfirmed -- Audio runs slow and distorted when resume from suspension https://launchpad.net/bugs/62435 From mjg59 at codon.org.uk Tue Sep 26 12:31:43 2006 From: mjg59 at codon.org.uk (Matthew Garrett) Date: Tue, 26 Sep 2006 12:31:43 -0000 Subject: [Bug 62435] Re: Audio runs slow and distorted when resume from suspension References: <20060926121517.5117.38629.malonedeb@gangotri.ubuntu.com> Message-ID: <20060926123143.10355.44202.launchpad@gandwana.ubuntu.com> ** Changed in: acpi (Ubuntu) Sourcepackagename: acpi => linux-source-2.6.15 -- Audio runs slow and distorted when resume from suspension https://launchpad.net/bugs/62435 From susancragin at earthlink.net Tue Sep 26 12:38:00 2006 From: susancragin at earthlink.net (susancragin) Date: Tue, 26 Sep 2006 12:38:00 -0000 Subject: [Bug 36998] Re: Kernel Won't Boot on an IBM Thinkpad R30 References: <20060328130330.20514.53400.malonedeb@gangotri.ubuntu.com> Message-ID: <20060926123800.5117.62673.malone@gangotri.ubuntu.com> I have an Acer Ferrari 4005 AMD 64. Boot hangs for a very long time but eventually (about 1-2 minutes later) boots after messages about the timer clock. Edgy Knot 3. See Bug 38263 Have the feeling these two bugs are not identical but inter-related. I have attached my lspci-vv and will attach lspci-vvn -- Kernel Won't Boot on an IBM Thinkpad R30 https://launchpad.net/bugs/36998 From susancragin at earthlink.net Tue Sep 26 12:38:53 2006 From: susancragin at earthlink.net (susancragin) Date: Tue, 26 Sep 2006 12:38:53 -0000 Subject: [Bug 36998] Re: Kernel Won't Boot on an IBM Thinkpad R30 References: <20060328130330.20514.53400.malonedeb@gangotri.ubuntu.com> Message-ID: <20060926123853.5117.15622.malone@gangotri.ubuntu.com> as promised lspci -vvn ** Attachment added: "lspci -vvn" http://librarian.launchpad.net/4441630/lspci%20-vvn -- Kernel Won't Boot on an IBM Thinkpad R30 https://launchpad.net/bugs/36998 From badpenguin79 at hotmail.com Tue Sep 26 12:53:03 2006 From: badpenguin79 at hotmail.com (giovanni) Date: Tue, 26 Sep 2006 12:53:03 -0000 Subject: [Bug 62435] Re: Audio runs slow and distorted when resume from suspension References: <20060926121517.5117.38629.malonedeb@gangotri.ubuntu.com> Message-ID: <20060926125303.10311.59341.launchpad@gandwana.ubuntu.com> ** Description changed: Binary package hint: acpi Hi at all, i'm using kubuntu 6.06 with 2.6.15-23-686 #SMP kernel. I have a problem with suspension. When i suspend my laptop, on resume audio seems to run very slowly and with distorsion. Instead with hibernation - is all ok. I dont know if this is a problem related to acpi or with alsa - driver or other. Any idea? + (aka suspend-to-disk) is all ok. I dont know if this is a problem + related to acpi or with alsa driver or other. Any idea? -- Audio runs slow and distorted when resume from suspension https://launchpad.net/bugs/62435 From ubuntu at kagou.fr Tue Sep 26 13:51:25 2006 From: ubuntu at kagou.fr (Patrice Vetsel) Date: Tue, 26 Sep 2006 13:51:25 -0000 Subject: [Bug 38278] Re: wifi card don't work. isl3886 is required but not installed References: <20060405203926.24486.7083.malonedeb@gangotri.ubuntu.com> Message-ID: <20060926135125.10355.22679.launchpad@gandwana.ubuntu.com> ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Fix Committed => Fix Released -- wifi card don't work. isl3886 is required but not installed https://launchpad.net/bugs/38278 From jakob at grimstveit.no Tue Sep 26 15:35:52 2006 From: jakob at grimstveit.no (Jakob Breivik Grimstveit) Date: Tue, 26 Sep 2006 15:35:52 -0000 Subject: [Bug 21344] Re: Hang when loading ipw2100 References: <20060113141220.21012.9495.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060926153552.5117.34916.malone@gangotri.ubuntu.com> Just added irqpoll to the boot options, and it booted promptly and gave me the login screen. During the failing boot it also claimed to fail during device driver loading in the "gui-like" console output, and then dropped entirely into normal text-mode for the rest of the boot text (before going into the error message loop described in message above) -- Hang when loading ipw2100 https://launchpad.net/bugs/21344 From jakob at grimstveit.no Tue Sep 26 15:31:14 2006 From: jakob at grimstveit.no (Jakob Breivik Grimstveit) Date: Tue, 26 Sep 2006 15:31:14 -0000 Subject: [Bug 21344] Re: Hang when loading ipw2100 References: <20060113141220.21012.9495.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060926153114.10311.12260.malone@gandwana.ubuntu.com> This still happens on my Toshiba Portege R100 w/Intel wlan chipset. [17180461.116000] ipw2100: eth1: Failed to start the card. This is repeated all the time. Just installed Ubuntu 6.06 on it and updated to latest kernel as of today. How can I circumvent this for the time being? -- Hang when loading ipw2100 https://launchpad.net/bugs/21344 From jackdachef at gmail.com Tue Sep 26 17:46:09 2006 From: jackdachef at gmail.com (dalinuxlova) Date: Tue, 26 Sep 2006 17:46:09 -0000 Subject: [Bug 57502] Re: JMicron PATA/SATA Controller does not work References: <20060823192235.13463.13121.malonedeb@gandwana.ubuntu.com> Message-ID: <20060926174609.10311.24288.malone@gandwana.ubuntu.com> is it possible to download it in a .tar.bz2 -package? so I could patch it against 2.6.17 and test it on my system ... (just want to help ;-) ) Thanks in advance ... -- JMicron PATA/SATA Controller does not work https://launchpad.net/bugs/57502 From tutey at o2.pl Tue Sep 26 18:09:46 2006 From: tutey at o2.pl (shiechka) Date: Tue, 26 Sep 2006 18:09:46 -0000 Subject: [Bug 27416] Re: built-in 4in1 card reader doesn't work References: <20060113145424.21012.36434.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060926180946.10311.96067.malone@gandwana.ubuntu.com> Still doesn't work in Dapper, daily updated. The 1 GB SD card has a nice partition table, Windoze XP on the same laptop and iPAQ HX4700 palmtop read the card fine. Only Dapper fails. dmesg snippet: [17179915.728000] usb 5-3: new high speed USB device using ehci_hcd and address 9 [17179915.876000] scsi5 : SCSI emulation for USB Mass Storage devices [17179915.876000] usb-storage: device found at 9 [17179915.876000] usb-storage: waiting for device to settle before scanning [17179920.876000] Vendor: Generic Model: STORAGE DEVICE Rev: 9144 [17179920.876000] Type: Direct-Access ANSI SCSI revision: 00 [17179921.012000] usb 5-3: reset high speed USB device using ehci_hcd and address 9 [17179921.068000] ehci_hcd 0000:00:1d.7: port 3 reset error -110 [17179921.068000] hub 5-0:1.0: hub_port_status failed (err = -32) [17179922.052000] usb 5-3: USB disconnect, address 9 [17179922.052000] sdb : READ CAPACITY failed. [17179922.052000] sdb : status=0, message=00, host=1, driver=00 [17179922.052000] sdb : sense not available. [17179922.052000] sdb: Write Protect is off [17179922.052000] sdb: Mode Sense: 00 00 00 00 [17179922.052000] sdb: assuming drive cache: write through [17179922.056000] sdb : READ CAPACITY failed. [17179922.056000] sdb : status=0, message=00, host=1, driver=00 [17179922.056000] sdb : sense not available. [17179922.056000] sdb: Write Protect is off [17179922.056000] sdb: Mode Sense: 00 00 00 00 [17179922.056000] sdb: assuming drive cache: write through [17179922.056000] sdb : READ CAPACITY failed. [17179922.056000] sdb : status=0, message=00, host=1, driver=00 [17179922.056000] sdb : sense not available. [17179922.056000] sdb: Write Protect is off [17179922.056000] sdb: Mode Sense: 00 00 00 00 [17179922.056000] sdb: assuming drive cache: write through [17179922.056000] sdb:<3>Buffer I/O error on device sdb, logical block 0 [17179922.056000] Buffer I/O error on device sdb, logical block 0 [17179922.056000] unable to read partition table [17179922.060000] sd 5:0:0:0: Attached scsi removable disk sdb [17179922.060000] sd 5:0:0:0: Attached scsi generic sg1 type 0 [17179922.060000] usb-storage: device scan complete And the /dev/sdb doesn't even appear. But sometimes the dmesg is different and the /dev/sdb does appear - but still no partitions available: [17180107.876000] usb-storage: device found at 3 [17180107.876000] usb-storage: waiting for device to settle before scanning [17180112.992000] usb 2-1: reset full speed USB device using uhci_hcd and address 3 [17180113.132000] Vendor: Generic Model: STORAGE DEVICE Rev: 9144 [17180113.132000] Type: Direct-Access ANSI SCSI revision: 00 [17180113.260000] SCSI device sdb: 1999872 512-byte hdwr sectors (1024 MB) [17180113.380000] usb 2-1: reset full speed USB device using uhci_hcd and address 3 [17180113.760000] usb 2-1: reset full speed USB device using uhci_hcd and address 3 [17180114.140000] usb 2-1: reset full speed USB device using uhci_hcd and address 3 [17180114.276000] sdb: Write Protect is off [17180114.276000] sdb: Mode Sense: 02 00 00 00 [17180114.276000] sdb: assuming drive cache: write through [17180114.420000] SCSI device sdb: 1999872 512-byte hdwr sectors (1024 MB) [17180114.536000] usb 2-1: reset full speed USB device using uhci_hcd and address 3 [17180114.916000] usb 2-1: reset full speed USB device using uhci_hcd and address 3 [17180115.296000] usb 2-1: reset full speed USB device using uhci_hcd and address 3 [17180115.432000] sdb: Write Protect is off [17180115.432000] sdb: Mode Sense: 02 00 00 00 [17180115.432000] sdb: assuming drive cache: write through [17180115.432000] sdb:<6>usb 2-1: reset full speed USB device using uhci_hcd and address 3 [17180116.056000] usb 2-1: reset full speed USB device using uhci_hcd and address 3 [17180116.436000] usb 2-1: reset full speed USB device using uhci_hcd and address 3 [17180116.816000] usb 2-1: reset full speed USB device using uhci_hcd and address 3 [17180117.196000] usb 2-1: reset full speed USB device using uhci_hcd and address 3 [17180117.332000] sd 7:0:0:0: SCSI error: return code = 0x70000 [17180117.332000] end_request: I/O error, dev sdb, sector 0 [17180117.332000] Buffer I/O error on device sdb, logical block 0 [17180117.576000] usb 2-1: reset full speed USB device using uhci_hcd and address 3 [17180117.956000] usb 2-1: reset full speed USB device using uhci_hcd and address 3 [17180118.336000] usb 2-1: reset full speed USB device using uhci_hcd and address 3 [17180118.716000] usb 2-1: reset full speed USB device using uhci_hcd and address 3 [17180119.096000] usb 2-1: reset full speed USB device using uhci_hcd and address 3 [17180119.232000] sd 7:0:0:0: SCSI error: return code = 0x70000 [17180119.232000] end_request: I/O error, dev sdb, sector 0 [17180119.232000] Buffer I/O error on device sdb, logical block 0 [17180119.232000] unable to read partition table [17180119.232000] sd 7:0:0:0: Attached scsi removable disk sdb [17180119.232000] sd 7:0:0:0: Attached scsi generic sg1 type 0 [17180119.240000] usb-storage: device scan complete I can then check the partition table with cfdisk: cfdisk 2.12r Disk Drive: /dev/sdb Size: 1023934464 bytes, 1023 MB Heads: 32 Sectors per Track: 62 Cylinders: 1008 Name Flags Part Type FS Type [Label] Size (MB) ------------------------------------------------------------------------------ sdb1 Boot Primary W95 FAT32 1023,94 Partition Table for /dev/sdb ---Starting--- ----Ending---- Start Number of # Flags Head Sect Cyl ID Head Sect Cyl Sector Sectors -- ----- ---- ---- ---- ---- ---- ---- ---- ----------- ----------- 1 0x80 1 1 0 0x0B 31 62 1007 62 1999810 2 0x00 0 0 0 0x00 0 0 0 0 0 3 0x00 0 0 0 0x00 0 0 0 0 0 4 0x00 0 0 0 0x00 0 0 0 0 0 Setting up partitions with cfdisk doesn't help. Maciek -- built-in 4in1 card reader doesn't work https://launchpad.net/bugs/27416 From sascha-ubuntu-launchpad at silbe.org Tue Sep 26 18:33:30 2006 From: sascha-ubuntu-launchpad at silbe.org (Sascha Silbe) Date: Tue, 26 Sep 2006 18:33:30 -0000 Subject: [Bug 49719] Re: #define PRISM2_NON_VOLATILE_DOWNLOAD commented out in hostap_config.h References: <20060614142057.4888.57540.malonedeb@gangotri.ubuntu.com> Message-ID: <20060926183331.5117.62961.malone@gangotri.ubuntu.com> Same issue here, except that I don't have Windows, so I cannot use it to flash the card. -- #define PRISM2_NON_VOLATILE_DOWNLOAD commented out in hostap_config.h https://launchpad.net/bugs/49719 From havardda-dev at orakel.ntnu.no Tue Sep 26 19:47:58 2006 From: havardda-dev at orakel.ntnu.no (havarddahle) Date: Tue, 26 Sep 2006 19:47:58 -0000 Subject: [Bug 62501] kernel ships with borked rt2400 wireless driver References: <20060926194758.10355.85078.malonedeb@gandwana.ubuntu.com> Message-ID: <20060926194758.10355.85078.malonedeb@gandwana.ubuntu.com> Public bug reported: Binary package hint: linux-image-2.6.15-27-k7 Background: I have an MSI Mega 180 form factor pc, which sports an nForce2 MB and has a RaLink 2400 wireless chip embedded. The default rt2400.ko driver supplied with the kernel ('BETA3') loads fine, but consequent iwconfig commands run at 99% cpu and renders the machine useless, forcing a power cycle. Steps to reproduce: 1. Install stock ubuntu kernel. 2. Load the rt2400 module: sudo modprobe -v rt2400 3. Try to run iwconfig: iwconfig ra0 essid any At this point the iwconfig command will never return, just end up using 99% cpu. Ctrl-C, kill -9 etc will also hang. Subsequently, normal shutdowns will also hang. Workaround: Get the rt2400 module from cvs at http://rt2x00.serialmonkey.com/. I'm using the 2006061700 version (although its version line says 2005/07/11. I don't really know why). Compile and install with the usual make; make install. Solution: Ubuntu kernels should not ship with the BETA3 cvs driver. Details: The borked driver: $ modinfo /lib/modules/2.6.15-27-k7/kernel/drivers/net/wireless/rt2400/rt2400.ko filename: /lib/modules/2.6.15-27-k7/kernel/drivers/net/wireless/rt2400/rt2400.ko author: http://rt2400.sourceforge.net description: Ralink RT2400 802.11b WLAN driver 1.2.2 BETA3 2005/07/31 license: GPL vermagic: 2.6.15-27-k7 SMP preempt K7 gcc-4.0 depends: alias: pci:v00001814d00000101sv*sd*bc*sc*i* srcversion: 65E0877C052644F3DBFB8F9 parm: ifname:Network device name (default ra%d) (s) parm: debug:Enable level: accepted values: 1 to switch debug on, 0 to switch debug off. (i) The working driver: $ modinfo rt2400 filename: /lib/modules/2.6.15-27-k7/extra/rt2400.ko author: http://rt2400.sourceforge.net description: Ralink RT2400 802.11b WLAN driver 1.2.2 - CVS 2005/07/11 license: GPL vermagic: 2.6.15-27-k7 SMP preempt K7 gcc-4.0 depends: alias: pci:v00001814d00000101sv*sd*bc*sc*i* srcversion: 5D9C3B65B23C1688535CC24 parm: ifname:Network device name (default ra%d) (charp) parm: debug:Enable level: accepted values: 1 to switch debug on, 0 to switch debug off. (int) lspci -v: 0000:01:07.0 Network controller: RaLink Wireless PCI Adpator RT2400 / RT2460 Subsystem: Micro-Star International Co., Ltd.: Unknown device 6827 Flags: bus master, slow devsel, latency 32, IRQ 201 Memory at df000000 (32-bit, non-prefetchable) [size=8K] Capabilities: [40] Power Management version 2 ** Affects: linux-source-2.6.15 (Ubuntu) Importance: Undecided Status: Unconfirmed -- kernel ships with borked rt2400 wireless driver https://launchpad.net/bugs/62501 From havardda-dev at orakel.ntnu.no Tue Sep 26 19:50:22 2006 From: havardda-dev at orakel.ntnu.no (havarddahle) Date: Tue, 26 Sep 2006 19:50:22 -0000 Subject: [Bug 62501] Re: kernel ships with borked rt2400 wireless driver References: <20060926194758.10355.85078.malonedeb@gandwana.ubuntu.com> Message-ID: <20060926195022.5117.92056.malone@gangotri.ubuntu.com> Let me add that this is not a regression: I've had this problem with previous kernels also. I'm running dapper. What's the easiest way to try the efty kernel? knot3? -- kernel ships with borked rt2400 wireless driver https://launchpad.net/bugs/62501 From sfllaw at ubuntu.com Tue Sep 26 20:10:28 2006 From: sfllaw at ubuntu.com (Simon Law) Date: Tue, 26 Sep 2006 20:10:28 -0000 Subject: [Bug 62501] Re: kernel ships with borked rt2400 wireless driver References: <20060926194758.10355.85078.malonedeb@gandwana.ubuntu.com> Message-ID: <20060926201029.10311.79269.malone@gandwana.ubuntu.com> Yes, the Edgy knot 3 kernel is your best bet. Would you try to reproduce the problem there, please? Thanks. ** Changed in: linux-source-2.6.15 (Ubuntu) Assignee: (unassigned) => Simon Law Status: Unconfirmed => Needs Info -- kernel ships with borked rt2400 wireless driver https://launchpad.net/bugs/62501 From eddie.hung at gmail.com Tue Sep 26 20:35:11 2006 From: eddie.hung at gmail.com (Eddie) Date: Tue, 26 Sep 2006 20:35:11 -0000 Subject: [Bug 34752] Re: [atmel] breezy->dapper wifi lost: signal power to 0 References: <20060313122743.17044.67675.malonedeb@gangotri.ubuntu.com> Message-ID: <20060926203511.10355.10076.malone@gandwana.ubuntu.com> I am now using the latest dapper kernel: 2.6.15-27-686, and wifi works fine. Can anyone confirm? Also, one thing that has also changed since I last used the dapper kernel (recall that I upgraded to the edgy 2.6.17 kernel, which worked) was that I was previously using just the 386 image, and not the 686 one I am using now... -- [atmel] breezy->dapper wifi lost: signal power to 0 https://launchpad.net/bugs/34752 From pandisv at yahoo.co.uk Tue Sep 26 23:21:47 2006 From: pandisv at yahoo.co.uk (Vassilis Pandis) Date: Tue, 26 Sep 2006 23:21:47 -0000 Subject: [Bug 62206] Re: Marvell 88E8056 gigabyte LAN interface on asus p5b doesn't work References: <20060924193119.17562.63865.malonedeb@gandwana.ubuntu.com> Message-ID: <20060926232148.5066.81360.malone@gangotri.ubuntu.com> I'm going to reject one of the bug tasks. Don't take this wrong - your report is not being ignored/rejected. It simply applies only to linux- source-2.6.15 . Thanks for reporting this. ** Changed in: linux-meta (Ubuntu) Status: Unconfirmed => Rejected -- Marvell 88E8056 gigabyte LAN interface on asus p5b doesn't work https://launchpad.net/bugs/62206 From rlrevell at joe-job.com Wed Sep 27 01:39:22 2006 From: rlrevell at joe-job.com (Lee Revell) Date: Wed, 27 Sep 2006 01:39:22 -0000 Subject: [Bug 58570] Re: kernel_image target fails with kernel 2.6.18-rc References: <20060902121437.30936.48954.malonedeb@gandwana.ubuntu.com> Message-ID: <20060927013922.5117.30591.malone@gangotri.ubuntu.com> What's the status of this? It's fixed upstream but still broken in Edgy. -- kernel_image target fails with kernel 2.6.18-rc https://launchpad.net/bugs/58570 From ben.collins at ubuntu.com Tue Sep 26 15:59:18 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Tue, 26 Sep 2006 15:59:18 -0000 Subject: [Bug 57502] Re: JMicron PATA/SATA Controller does not work References: <20060823192235.13463.13121.malonedeb@gandwana.ubuntu.com> Message-ID: <20060926155918.10311.17842.malone@gandwana.ubuntu.com> Kernel will be available in a few days. ** Changed in: linux-source-2.6.17 (Ubuntu) Status: Fix Committed => Fix Released ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Fix Committed => In Progress -- JMicron PATA/SATA Controller does not work https://launchpad.net/bugs/57502 From towsonu2003 at gmail.com Wed Sep 27 03:34:00 2006 From: towsonu2003 at gmail.com (towsonu2003) Date: Wed, 27 Sep 2006 03:34:00 -0000 Subject: [Bug 17881] Re: usb flash memory hangs after copying few MB References: <20060113135344.21012.12609.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060927033401.10355.51842.malone@gandwana.ubuntu.com> ** Changed in: linux-source-2.6.12 (Ubuntu) Status: Needs Info => Confirmed -- usb flash memory hangs after copying few MB https://launchpad.net/bugs/17881 From eric at extremeboredom.net Wed Sep 27 03:38:32 2006 From: eric at extremeboredom.net (Eric Butler) Date: Wed, 27 Sep 2006 03:38:32 -0000 Subject: [Bug 57858] Re: com2.6.15.7-ubuntu1 source compilation error at drivers/usb/net/zd1211/zd1205.o References: <20060827035747.17263.81509.malonedeb@gangotri.ubuntu.com> Message-ID: <20060927033833.10311.6115.malone@gandwana.ubuntu.com> Unconfirmed ->Rejected. As per https://wiki.ubuntu.com/KernelCustomBuild "Building and using a custom kernel will make it very difficult to get support for your system. You will not be allowed to file bugs on the custom-built kernel (if you do, they will be Rejected without explanation)." ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Unconfirmed => Rejected -- com2.6.15.7-ubuntu1 source compilation error at drivers/usb/net/zd1211/zd1205.o https://launchpad.net/bugs/57858 From fabbione at ubuntu.com Wed Sep 27 03:39:48 2006 From: fabbione at ubuntu.com (Fabio Massimo Di Nitto) Date: Wed, 27 Sep 2006 03:39:48 -0000 Subject: [Bug 61861] Re: ruby1.8: fails to build on ppc under 2.6.15 kernel References: <20060922110904.23105.31521.malonedeb@gangotri.ubuntu.com> Message-ID: <20060927033948.10311.99392.launchpad@gandwana.ubuntu.com> ** Also affects: linux-source-2.6.15 (Ubuntu) Importance: Undecided Status: Unconfirmed ** Changed in: linux-source-2.6.15 (Ubuntu) Importance: Undecided => Low Status: Unconfirmed => Confirmed -- ruby1.8: fails to build on ppc under 2.6.15 kernel https://launchpad.net/bugs/61861 From benh at kernel.crashing.org Wed Sep 27 03:40:35 2006 From: benh at kernel.crashing.org (Benjamin Herrenschmidt) Date: Wed, 27 Sep 2006 03:40:35 -0000 Subject: [Bug 61861] Re: ruby1.8: fails to build on ppc under 2.6.15 kernel References: <20060922110904.23105.31521.malonedeb@gangotri.ubuntu.com> <20060927032541.10311.11629.malone@gandwana.ubuntu.com> Message-ID: <1159328435.18293.18.camel@localhost.localdomain> On Wed, 2006-09-27 at 03:25 +0000, Fabio Massimo Di Nitto wrote: > confirmed that it does build with .17. > > Ben do you have the patch to fix these signal & get/setcontext issues > somewhere? is it worth to backport it to .15 (if possible at all?) No patch at hand. From memory, there have been a load of signal related fixes around 2.6.16 or so, backporting might not be simple. You can try to diff signal_32.c but it might have dependencies on changes in the asm code... I'll try to have a look maybe next week or later this week. Ben -- ruby1.8: fails to build on ppc under 2.6.15 kernel https://launchpad.net/bugs/61861 From fabbione at ubuntu.com Wed Sep 27 03:42:53 2006 From: fabbione at ubuntu.com (Fabio Massimo Di Nitto) Date: Wed, 27 Sep 2006 03:42:53 -0000 Subject: [Bug 61861] Re: ruby1.8: fails to build on ppc under 2.6.15 kernel References: <20060922110904.23105.31521.malonedeb@gangotri.ubuntu.com> Message-ID: <20060927034253.10355.51930.malone@gandwana.ubuntu.com> this is no more a blocker for beta release ** Changed in: ruby1.8 (Ubuntu) Target: ubuntu-6.10-beta => None -- ruby1.8: fails to build on ppc under 2.6.15 kernel https://launchpad.net/bugs/61861 From eric at extremeboredom.net Wed Sep 27 03:44:11 2006 From: eric at extremeboredom.net (Eric Butler) Date: Wed, 27 Sep 2006 03:44:11 -0000 Subject: [Bug 39276] Re: Fails to compile using config from dapper References: <20060412095035.24516.46392.malonedeb@gangotri.ubuntu.com> Message-ID: <20060927034411.5066.80401.malone@gangotri.ubuntu.com> Unconfirmed ->Rejected. As per https://wiki.ubuntu.com/KernelCustomBuild "Building and using a custom kernel will make it very difficult to get support for your system. You will not be allowed to file bugs on the custom-built kernel (if you do, they will be Rejected without explanation)." ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Unconfirmed => Rejected -- Fails to compile using config from dapper https://launchpad.net/bugs/39276 From eric at extremeboredom.net Wed Sep 27 03:53:20 2006 From: eric at extremeboredom.net (Eric Butler) Date: Wed, 27 Sep 2006 03:53:20 -0000 Subject: [Bug 42675] Re: Airport Extreme not identified as wireless interface References: <20060503000520.16739.93003.malonedeb@gandwana.ubuntu.com> Message-ID: <20060927035320.5117.78522.malone@gangotri.ubuntu.com> Can you please clarify... your airport extreme card works properly if you configure it manually (using iwconfig, etc.), but the network monitor applet doesn't think it's a wireless interface? ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Unconfirmed => Needs Info -- Airport Extreme not identified as wireless interface https://launchpad.net/bugs/42675 From eric at extremeboredom.net Wed Sep 27 04:03:39 2006 From: eric at extremeboredom.net (Eric Butler) Date: Wed, 27 Sep 2006 04:03:39 -0000 Subject: [Bug 47906] Re: XMMS crazy actions References: <20060601191608.2224.46940.malonedeb@gangotri.ubuntu.com> Message-ID: <20060927040339.5066.55195.malone@gangotri.ubuntu.com> Alright this doesn't sound like a kernel bug. Could you please provide a very specific list of steps needed to reproduce this problem? ** Changed in: linux-source-2.6.15 (Ubuntu) Sourcepackagename: linux-source-2.6.15 => xmms Status: Unconfirmed => Needs Info -- XMMS crazy actions https://launchpad.net/bugs/47906 From nekohayo at gmail.com Wed Sep 27 04:29:31 2006 From: nekohayo at gmail.com (Jeff Fortin) Date: Wed, 27 Sep 2006 04:29:31 -0000 Subject: [Bug 19241] laptop sudden poweroff / failure References: <20060113140036.21012.34577.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060927042931.10311.29762.launchpad@canonical@gandwana.ubuntu.com> Public bug reported: For some reason, my laptop randomly fails. Symptoms: exactly as if I had a power shortage. The screen/harddrive/fans/leds all poweroff in a fraction of second. I need to press the power button and the laptop comes back up booting as if everything was normal. I have not found any patterns to justify this. I have checked for: * heat * uptime * load * USB load * sound usage * peripherals such as removable CDRW drive (it's actually almost never plugged in) * network devices (with a wired card, a wireless card, or none of the two) Since this is sudden, I think the kernel does not log anything to provide information on this problem. It seems I am not the only one with this issue, but I cannot provide more examples yet. This is on a Dell Inspiron 5000 running Hoary. ** Affects: linux-source-2.6.12 (Ubuntu) Importance: Medium Assignee: Ubuntu Laptop Team Status: Confirmed -- laptop sudden poweroff / failure https://launchpad.net/bugs/19241 From towsonu2003 at gmail.com Wed Sep 27 04:29:30 2006 From: towsonu2003 at gmail.com (towsonu2003) Date: Wed, 27 Sep 2006 04:29:30 -0000 Subject: [Bug 19241] Re: laptop sudden poweroff / failure References: <20060113140036.21012.34577.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060927042931.10311.27246.launchpad@gandwana.ubuntu.com> ** Changed in: Ubuntu Sourcepackagename: None => linux-source-2.6.12 Status: Needs Info => Confirmed -- laptop sudden poweroff / failure https://launchpad.net/bugs/19241 From towsonu2003 at gmail.com Wed Sep 27 04:36:37 2006 From: towsonu2003 at gmail.com (towsonu2003) Date: Wed, 27 Sep 2006 04:36:37 -0000 Subject: [Bug 20781] Re: pcmcia detection locks up my laptop [also dapper flight 5] References: <20060113140912.21012.22149.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060927043638.5117.6573.launchpad@gangotri.ubuntu.com> ** Changed in: linux-source-2.6.15 (Ubuntu) Assignee: (unassigned) => Ubuntu Laptop Team -- pcmcia detection locks up my laptop [also dapper flight 5] https://launchpad.net/bugs/20781 From stan at saticed.me.uk Wed Sep 27 05:33:08 2006 From: stan at saticed.me.uk (Tristan Hill) Date: Wed, 27 Sep 2006 05:33:08 -0000 Subject: [Bug 62206] Re: Marvell 88E8056 gigabyte LAN interface on asus p5b doesn't work References: <20060924193119.17562.63865.malonedeb@gandwana.ubuntu.com> Message-ID: <20060927053308.10355.26228.launchpad@gandwana.ubuntu.com> ** Also affects: linux-source-2.6.17 (Ubuntu) Importance: Undecided Status: Unconfirmed -- Marvell 88E8056 gigabyte LAN interface on asus p5b doesn't work https://launchpad.net/bugs/62206 From andrew.conkling at gmail.com Wed Sep 27 05:50:37 2006 From: andrew.conkling at gmail.com (Andrew Conkling) Date: Wed, 27 Sep 2006 05:50:37 -0000 Subject: [Bug 45167] Re: snd_hda: Default mixer channel is PCM instead of Front References: <20060517030521.15819.80093.malonedeb@gangotri.ubuntu.com> Message-ID: <20060927055037.10355.27850.malone@gandwana.ubuntu.com> On 9/26/06, John Dong wrote: > This is bug 45167.... :) Is that a yes? /me ducks and hides under a rock until Edgy is released. -- snd_hda: Default mixer channel is PCM instead of Front https://launchpad.net/bugs/45167 From micah at cowan.name Wed Sep 27 06:22:43 2006 From: micah at cowan.name (Micah Cowan) Date: Wed, 27 Sep 2006 06:22:43 -0000 Subject: [Bug 47906] Re: XMMS crazy actions References: <20060601191608.2224.46940.malonedeb@gangotri.ubuntu.com> Message-ID: <20060927062243.10355.52306.malone@gandwana.ubuntu.com> Your bug lacks information we would need to investigate further. We are now going to close the bug - please reopen if you have more information at hand. ** Changed in: xmms (Ubuntu) Status: Needs Info => Rejected -- XMMS crazy actions https://launchpad.net/bugs/47906 From bugwatch at bugs.launchpad.net Wed Sep 27 07:31:43 2006 From: bugwatch at bugs.launchpad.net (Bug Watch Updater) Date: Wed, 27 Sep 2006 07:31:43 -0000 Subject: [Bug 15194] Re: initrd-tools: use qla1280 on 2.6 instead qlogicisp References: <20060113134056.21012.13746.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060927073536.16251.84206.launchpad@gangotri.ubuntu.com> ** Changed in: initramfs-tools (Debian) Status: Unknown => Fix Released -- initrd-tools: use qla1280 on 2.6 instead qlogicisp https://launchpad.net/bugs/15194 From bugwatch at bugs.launchpad.net Wed Sep 27 07:31:43 2006 From: bugwatch at bugs.launchpad.net (Bug Watch Updater) Date: Wed, 27 Sep 2006 07:31:43 -0000 Subject: [Bug 14983] Re: [warty] CAN-2005-0937: DoS in futex handling References: <20060113133945.21012.23168.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060927073413.16251.19452.launchpad@gangotri.ubuntu.com> ** Changed in: linux-source-2.6.15 (Debian) Status: Unknown => Fix Released -- [warty] CAN-2005-0937: DoS in futex handling https://launchpad.net/bugs/14983 From bugwatch at bugs.launchpad.net Wed Sep 27 07:31:43 2006 From: bugwatch at bugs.launchpad.net (Bug Watch Updater) Date: Wed, 27 Sep 2006 07:31:43 -0000 Subject: [Bug 14105] Re: ppp: out-of-memory 30min after "LCP terminated by peer" References: <20060113133453.21012.68103.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060927073540.16251.88075.launchpad@gangotri.ubuntu.com> ** Changed in: linux-source-2.6.15 (Debian) Status: Unknown => Fix Released -- ppp: out-of-memory 30min after "LCP terminated by peer" https://launchpad.net/bugs/14105 From bugwatch at bugs.launchpad.net Wed Sep 27 07:31:43 2006 From: bugwatch at bugs.launchpad.net (Bug Watch Updater) Date: Wed, 27 Sep 2006 07:31:43 -0000 Subject: [Bug 13235] Re: ndiswrapper should go to contrib References: <20060113132956.21012.40614.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060927073520.16251.841.launchpad@gangotri.ubuntu.com> ** Changed in: ndiswrapper (Debian) Status: Unknown => Fix Released -- ndiswrapper should go to contrib https://launchpad.net/bugs/13235 From bugwatch at bugs.launchpad.net Wed Sep 27 07:31:43 2006 From: bugwatch at bugs.launchpad.net (Bug Watch Updater) Date: Wed, 27 Sep 2006 07:31:43 -0000 Subject: [Bug 12853] Re: kernel-package: Fails to build x86 2.6 kernels, missing rule for conf.vars References: <20060113132754.21012.40852.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060927073629.16251.54588.launchpad@gangotri.ubuntu.com> ** Changed in: kernel-package (Debian) Status: Unknown => Fix Released -- kernel-package: Fails to build x86 2.6 kernels, missing rule for conf.vars https://launchpad.net/bugs/12853 From bugwatch at bugs.launchpad.net Wed Sep 27 07:31:43 2006 From: bugwatch at bugs.launchpad.net (Bug Watch Updater) Date: Wed, 27 Sep 2006 07:31:43 -0000 Subject: [Bug 12837] Re: kernel-package locks up when building References: <20060113132749.21012.40272.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060927073419.16251.63185.launchpad@gangotri.ubuntu.com> ** Changed in: kernel-package (Debian) Status: Unknown => Fix Released -- kernel-package locks up when building https://launchpad.net/bugs/12837 From bugwatch at bugs.launchpad.net Wed Sep 27 07:31:43 2006 From: bugwatch at bugs.launchpad.net (Bug Watch Updater) Date: Wed, 27 Sep 2006 07:31:43 -0000 Subject: [Bug 12810] Re: FTBFS: cannot build powerpc 2.6 kernels, missing rule for conf.vars References: <20060113132740.21012.88801.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060927073511.16251.99524.launchpad@gangotri.ubuntu.com> ** Changed in: kernel-package (Debian) Status: Unknown => Fix Released -- FTBFS: cannot build powerpc 2.6 kernels, missing rule for conf.vars https://launchpad.net/bugs/12810 From bugwatch at bugs.launchpad.net Wed Sep 27 07:31:43 2006 From: bugwatch at bugs.launchpad.net (Bug Watch Updater) Date: Wed, 27 Sep 2006 07:31:43 -0000 Subject: [Bug 12895] Re: kernel-package: it fails to build my kernel with strange error message References: <20060113132808.21012.46077.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060927073154.16251.3529.launchpad@gangotri.ubuntu.com> ** Changed in: kernel-package (Debian) Status: Unknown => Fix Released -- kernel-package: it fails to build my kernel with strange error message https://launchpad.net/bugs/12895 From bugwatch at bugs.launchpad.net Wed Sep 27 07:31:43 2006 From: bugwatch at bugs.launchpad.net (Bug Watch Updater) Date: Wed, 27 Sep 2006 07:31:43 -0000 Subject: [Bug 11967] Re: kernel-package: grub configuration wrong when root partion is on a SATA/libata disk References: <20060113132257.21012.14499.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060927073606.16251.5613.launchpad@gangotri.ubuntu.com> ** Changed in: kernel-package (Debian) Status: Unknown => Fix Released -- kernel-package: grub configuration wrong when root partion is on a SATA/libata disk https://launchpad.net/bugs/11967 From bugwatch at bugs.launchpad.net Wed Sep 27 07:31:43 2006 From: bugwatch at bugs.launchpad.net (Bug Watch Updater) Date: Wed, 27 Sep 2006 07:31:43 -0000 Subject: [Bug 11562] Re: kernel: NFS fh_verify causes lost output (2.4 kernel) References: <20060113132044.21012.25394.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060927073202.16251.67490.launchpad@gangotri.ubuntu.com> ** Changed in: linux-source-2.6.15 (Debian) Status: Unknown => Fix Released -- kernel: NFS fh_verify causes lost output (2.4 kernel) https://launchpad.net/bugs/11562 From bugwatch at bugs.launchpad.net Wed Sep 27 07:31:43 2006 From: bugwatch at bugs.launchpad.net (Bug Watch Updater) Date: Wed, 27 Sep 2006 07:31:43 -0000 Subject: [Bug 11311] Re: kernel-source-2.4.27: Version symbols mismatch with kernel-image-2.4.27-1-686-smp References: <20060113131922.21012.91016.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060927073216.16251.80309.launchpad@gangotri.ubuntu.com> *** This bug is a duplicate of bug 11368 *** ** Changed in: linux-source-2.6.15 (Debian) Status: Unknown => Fix Released -- kernel-source-2.4.27: Version symbols mismatch with kernel-image-2.4.27-1-686-smp https://launchpad.net/bugs/11311 From bugwatch at bugs.launchpad.net Wed Sep 27 07:31:43 2006 From: bugwatch at bugs.launchpad.net (Bug Watch Updater) Date: Wed, 27 Sep 2006 07:31:43 -0000 Subject: [Bug 11368] Re: alsa-modules-2.4.27-1-686: plenty of unresolved symbols References: <20060113131939.21012.97391.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060927073312.16251.13801.launchpad@gangotri.ubuntu.com> ** Changed in: linux-source-2.6.15 (Debian) Status: Unknown => Fix Released -- alsa-modules-2.4.27-1-686: plenty of unresolved symbols https://launchpad.net/bugs/11368 From bugwatch at bugs.launchpad.net Wed Sep 27 07:31:43 2006 From: bugwatch at bugs.launchpad.net (Bug Watch Updater) Date: Wed, 27 Sep 2006 07:31:43 -0000 Subject: [Bug 7695] Re: kernel-image-2.6.8-1-386: oops in u32_classify > htb_classify References: <20060113125842.21012.51542.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060927073615.16251.57130.launchpad@gangotri.ubuntu.com> ** Changed in: linux-source-2.6.15 (Debian) Status: Unknown => Fix Released -- kernel-image-2.6.8-1-386: oops in u32_classify > htb_classify https://launchpad.net/bugs/7695 From bugwatch at bugs.launchpad.net Wed Sep 27 07:31:43 2006 From: bugwatch at bugs.launchpad.net (Bug Watch Updater) Date: Wed, 27 Sep 2006 07:31:43 -0000 Subject: [Bug 7672] Re: kernel-image-2.4.27-1-686: Disk on Promise PDC20268 unusable References: <20060113125834.21012.90625.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060927073356.16251.38.launchpad@gangotri.ubuntu.com> ** Changed in: linux-source-2.6.15 (Debian) Status: Unknown => Fix Released -- kernel-image-2.4.27-1-686: Disk on Promise PDC20268 unusable https://launchpad.net/bugs/7672 From bugwatch at bugs.launchpad.net Wed Sep 27 07:31:43 2006 From: bugwatch at bugs.launchpad.net (Bug Watch Updater) Date: Wed, 27 Sep 2006 07:31:43 -0000 Subject: [Bug 7663] Re: kernel-image-2.4.27-1-k7: no dma References: <20060113125830.21012.32854.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060927073524.16251.20255.launchpad@gangotri.ubuntu.com> *** This bug is a duplicate of bug 7672 *** ** Changed in: linux-source-2.6.15 (Debian) Status: Unknown => Fix Released -- kernel-image-2.4.27-1-k7: no dma https://launchpad.net/bugs/7663 From bugwatch at bugs.launchpad.net Wed Sep 27 07:31:43 2006 From: bugwatch at bugs.launchpad.net (Bug Watch Updater) Date: Wed, 27 Sep 2006 07:31:43 -0000 Subject: [Bug 7615] Re: kernel-image-2.6.8-1-k7: limits ethernet connections to 100 Kbit/s References: <20060113125813.21012.85319.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060927073617.16251.78490.launchpad@gangotri.ubuntu.com> ** Changed in: linux-source-2.6.15 (Debian) Status: Unknown => Fix Released -- kernel-image-2.6.8-1-k7: limits ethernet connections to 100 Kbit/s https://launchpad.net/bugs/7615 From bugwatch at bugs.launchpad.net Wed Sep 27 07:31:43 2006 From: bugwatch at bugs.launchpad.net (Bug Watch Updater) Date: Wed, 27 Sep 2006 07:31:43 -0000 Subject: [Bug 7612] Re: kernel-source-2.6.8: compile error in drivers/block/scsi_ioctl.c References: <20060113125811.21012.1910.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060927073454.16251.36429.launchpad@gangotri.ubuntu.com> ** Changed in: linux-source-2.6.15 (Debian) Status: Unknown => Fix Released -- kernel-source-2.6.8: compile error in drivers/block/scsi_ioctl.c https://launchpad.net/bugs/7612 From bugwatch at bugs.launchpad.net Wed Sep 27 07:31:43 2006 From: bugwatch at bugs.launchpad.net (Bug Watch Updater) Date: Wed, 27 Sep 2006 07:31:43 -0000 Subject: [Bug 7172] Re: kernel-image-2.4.26-1-386: unable to create `./lib/modules/2.4.26-1-386/kernel/drivers/i2c/i2c-algo-bit.o' References: <20060113125519.21012.59335.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060927073437.16251.5405.launchpad@gangotri.ubuntu.com> ** Changed in: linux-source-2.6.15 (Debian) Status: Unknown => Fix Released -- kernel-image-2.4.26-1-386: unable to create `./lib/modules/2.4.26-1-386/kernel/drivers/i2c/i2c-algo-bit.o' https://launchpad.net/bugs/7172 From bugwatch at bugs.launchpad.net Wed Sep 27 07:31:43 2006 From: bugwatch at bugs.launchpad.net (Bug Watch Updater) Date: Wed, 27 Sep 2006 07:31:43 -0000 Subject: [Bug 7168] Re: kernel-image-2.4.26-1-686: oops under unknown circumstances (cron task?) References: <20060113125517.21012.71509.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060927073427.16251.51658.launchpad@gangotri.ubuntu.com> ** Changed in: linux-source-2.6.15 (Debian) Status: Unknown => Fix Released -- kernel-image-2.4.26-1-686: oops under unknown circumstances (cron task?) https://launchpad.net/bugs/7168 From bugwatch at bugs.launchpad.net Wed Sep 27 07:31:43 2006 From: bugwatch at bugs.launchpad.net (Bug Watch Updater) Date: Wed, 27 Sep 2006 07:31:43 -0000 Subject: [Bug 6912] Re: kernel-source-2.4.26: Kernel panic with NFS traffic over IPsec References: <20060113125328.21012.54435.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060927073416.16251.20243.launchpad@gangotri.ubuntu.com> ** Changed in: linux-source-2.6.15 (Debian) Status: Unknown => Fix Released -- kernel-source-2.4.26: Kernel panic with NFS traffic over IPsec https://launchpad.net/bugs/6912 From bugwatch at bugs.launchpad.net Wed Sep 27 07:31:43 2006 From: bugwatch at bugs.launchpad.net (Bug Watch Updater) Date: Wed, 27 Sep 2006 07:31:43 -0000 Subject: [Bug 6891] Re: kernel-image-2.6.6-i386: not ready for sarge just yet References: <20060113125318.21012.5832.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060927073601.16251.79067.launchpad@gangotri.ubuntu.com> ** Changed in: linux-source-2.6.15 (Debian) Status: Unknown => Fix Released -- kernel-image-2.6.6-i386: not ready for sarge just yet https://launchpad.net/bugs/6891 From bugwatch at bugs.launchpad.net Wed Sep 27 07:31:43 2006 From: bugwatch at bugs.launchpad.net (Bug Watch Updater) Date: Wed, 27 Sep 2006 07:31:43 -0000 Subject: [Bug 6817] Re: kernel-image: user application can hang the kernel References: <20060113125228.21012.29593.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060927073504.16251.6223.launchpad@gangotri.ubuntu.com> ** Changed in: linux-source-2.6.15 (Debian) Status: Unknown => Fix Released -- kernel-image: user application can hang the kernel https://launchpad.net/bugs/6817 From bugwatch at bugs.launchpad.net Wed Sep 27 07:31:43 2006 From: bugwatch at bugs.launchpad.net (Bug Watch Updater) Date: Wed, 27 Sep 2006 07:31:43 -0000 Subject: [Bug 6813] Re: installation-reports: 2nd stage problem with Linux 2.6.6 References: <20060113125226.21012.60515.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060927073553.16251.10466.launchpad@gangotri.ubuntu.com> *** This bug is a duplicate of bug 6812 *** ** Changed in: linux-source-2.6.15 (Debian) Status: Unknown => Fix Released -- installation-reports: 2nd stage problem with Linux 2.6.6 https://launchpad.net/bugs/6813 From bugwatch at bugs.launchpad.net Wed Sep 27 07:31:43 2006 From: bugwatch at bugs.launchpad.net (Bug Watch Updater) Date: Wed, 27 Sep 2006 07:31:43 -0000 Subject: [Bug 6816] Re: Debian patch to PCI initialization code on alpha has caused longstanding, widespread brokenness References: <20060113125227.21012.67167.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060927073502.16251.32272.launchpad@gangotri.ubuntu.com> ** Changed in: linux-source-2.6.15 (Debian) Status: Unknown => Fix Released -- Debian patch to PCI initialization code on alpha has caused longstanding, widespread brokenness https://launchpad.net/bugs/6816 From bugwatch at bugs.launchpad.net Wed Sep 27 07:31:43 2006 From: bugwatch at bugs.launchpad.net (Bug Watch Updater) Date: Wed, 27 Sep 2006 07:31:43 -0000 Subject: [Bug 6812] Re: kernel: vga16fb is broken (at least on vmware) References: <20060113125225.21012.63571.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060927073327.16251.12246.launchpad@gangotri.ubuntu.com> ** Changed in: linux-source-2.6.15 (Debian) Status: Unknown => Fix Released -- kernel: vga16fb is broken (at least on vmware) https://launchpad.net/bugs/6812 From ondrej at sury.org Wed Sep 27 07:59:32 2006 From: ondrej at sury.org (=?utf-8?b?T25kxZllaiBTdXLDvQ==?=) Date: Wed, 27 Sep 2006 07:59:32 -0000 Subject: [Bug 26940] Re: Kernel 2.6.15-7-686 won't boot with root on SATA disk References: <20060113145204.21012.90778.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060927075932.5066.52862.malone@gangotri.ubuntu.com> Yes, it's fixed in edgy. Thanks -- Kernel 2.6.15-7-686 won't boot with root on SATA disk https://launchpad.net/bugs/26940 From bugwatch at bugs.launchpad.net Wed Sep 27 07:31:43 2006 From: bugwatch at bugs.launchpad.net (Bug Watch Updater) Date: Wed, 27 Sep 2006 07:31:43 -0000 Subject: [Bug 7825] Re: growisofs broken with 2.6.8.1 References: <20060113125934.21012.55085.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060927073214.16251.54761.launchpad@gangotri.ubuntu.com> ** Changed in: linux-source-2.6.15 (Debian) Status: Unknown => Fix Released -- growisofs broken with 2.6.8.1 https://launchpad.net/bugs/7825 From bugwatch at bugs.launchpad.net Wed Sep 27 07:31:43 2006 From: bugwatch at bugs.launchpad.net (Bug Watch Updater) Date: Wed, 27 Sep 2006 07:31:43 -0000 Subject: [Bug 7673] Re: kernel-headers-2.4.27-1-k7: cannot 'hdparm -d1 /dev/hda' with 2.4.27-1-k7 kernel which worked with 2.4.26-1-k7 References: <20060113125835.21012.16452.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060927073243.16251.60065.launchpad@gangotri.ubuntu.com> *** This bug is a duplicate of bug 7672 *** ** Changed in: linux-source-2.6.15 (Debian) Status: Unknown => Fix Released -- kernel-headers-2.4.27-1-k7: cannot 'hdparm -d1 /dev/hda' with 2.4.27-1-k7 kernel which worked with 2.4.26-1-k7 https://launchpad.net/bugs/7673 From bugwatch at bugs.launchpad.net Wed Sep 27 07:31:43 2006 From: bugwatch at bugs.launchpad.net (Bug Watch Updater) Date: Wed, 27 Sep 2006 07:31:43 -0000 Subject: [Bug 7304] Re: kernel-image-2.6.7-1-686-smp: oppses while starting, during ACPI? References: <20060113125613.21012.8823.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060927073535.16251.43073.launchpad@gangotri.ubuntu.com> ** Changed in: linux-source-2.6.15 (Debian) Status: Unknown => Fix Released -- kernel-image-2.6.7-1-686-smp: oppses while starting, during ACPI? https://launchpad.net/bugs/7304 From mathias.hasselmann at gmx.de Wed Sep 27 08:25:51 2006 From: mathias.hasselmann at gmx.de (Mathias Hasselmann) Date: Wed, 27 Sep 2006 08:25:51 -0000 Subject: [Bug 44814] Re: No sound with Intel HDA/Realtek ALC861 References: <20060515111539.15848.19029.malonedeb@gangotri.ubuntu.com> Message-ID: <20060927082551.10355.80155.malone@gandwana.ubuntu.com> Daniel, sorry for responding that late, but today I've tested with linux-image-2.6.15-27-686 and sound happens. So this issue appears to be resolved for the Uniwill M31 barebone. -- No sound with Intel HDA/Realtek ALC861 https://launchpad.net/bugs/44814 From Corneliussen at gmail.com Wed Sep 27 08:38:03 2006 From: Corneliussen at gmail.com (Andcor) Date: Wed, 27 Sep 2006 08:38:03 -0000 Subject: [Bug 57502] Re: JMicron PATA/SATA Controller does not work References: <20060823192235.13463.13121.malonedeb@gandwana.ubuntu.com> Message-ID: <20060927083803.10311.5160.malone@gandwana.ubuntu.com> Available in a ubuntu edgy daily build cd or just plain available? -- JMicron PATA/SATA Controller does not work https://launchpad.net/bugs/57502 From crimsun at fungus.sh.nu Wed Sep 27 08:45:48 2006 From: crimsun at fungus.sh.nu (Daniel T Chen) Date: Wed, 27 Sep 2006 08:45:48 -0000 Subject: [Bug 44814] Re: No sound with Intel HDA/Realtek ALC861 References: <20060515111539.15848.19029.malonedeb@gangotri.ubuntu.com> Message-ID: <20060927084549.10355.97927.malone@gandwana.ubuntu.com> Marking fixed per submitter's update. ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Needs Info => Fix Released -- No sound with Intel HDA/Realtek ALC861 https://launchpad.net/bugs/44814 From markc.lists at gmail.com Wed Sep 27 09:21:46 2006 From: markc.lists at gmail.com (mc44) Date: Wed, 27 Sep 2006 09:21:46 -0000 Subject: [Bug 60630] Re: edgy ndiswrapper-utils, cant find binaries etc... References: <20060915214053.28890.63065.malonedeb@gangotri.ubuntu.com> Message-ID: <20060927092146.5117.96708.launchpad@gangotri.ubuntu.com> *** This bug is a duplicate of bug 59983 *** ** This bug has been marked a duplicate of bug 59983 ndiswrapper in edgy broken -- edgy ndiswrapper-utils, cant find binaries etc... https://launchpad.net/bugs/60630 From markc.lists at gmail.com Wed Sep 27 09:21:46 2006 From: markc.lists at gmail.com (mc44) Date: Wed, 27 Sep 2006 09:21:46 -0000 Subject: [Bug 59983] Re: ndiswrapper in edgy broken References: <20060911235728.16647.6163.malonedeb@gangotri.ubuntu.com> Message-ID: <20060927092146.5117.37808.launchpad@gangotri.ubuntu.com> ** Bug 60630 has been marked a duplicate of this bug -- ndiswrapper in edgy broken https://launchpad.net/bugs/59983 From ubuntu-launchpad at theplayboymansion.net Wed Sep 27 09:23:07 2006 From: ubuntu-launchpad at theplayboymansion.net (ph8) Date: Wed, 27 Sep 2006 09:23:07 -0000 Subject: [Bug 57502] Re: JMicron PATA/SATA Controller does not work References: <20060823192235.13463.13121.malonedeb@gandwana.ubuntu.com> Message-ID: <20060927092307.5117.95116.malone@gangotri.ubuntu.com> >From what i've seen the kernel is uploaded, which means it will be available from the edgy repositories very shortly, if not already. After that it will take a few days to make it into a daily CD - i would estimate Monday at the latest without pretending to know a lot about the process. -- JMicron PATA/SATA Controller does not work https://launchpad.net/bugs/57502 From bugwatch at bugs.launchpad.net Wed Sep 27 07:31:43 2006 From: bugwatch at bugs.launchpad.net (Bug Watch Updater) Date: Wed, 27 Sep 2006 07:31:43 -0000 Subject: [Bug 7713] Re: does not apply to vanila kernel References: <20060113125849.21012.37250.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060927073445.16251.87387.launchpad@gangotri.ubuntu.com> ** Changed in: linux-source-2.6.15 (Debian) Status: Unknown => Fix Released -- does not apply to vanila kernel https://launchpad.net/bugs/7713 From chantry.xavier at gmail.com Wed Sep 27 10:19:02 2006 From: chantry.xavier at gmail.com (Xavier) Date: Wed, 27 Sep 2006 10:19:02 -0000 Subject: [Bug 58570] Re: kernel_image target fails with kernel 2.6.18-rc References: <20060902121437.30936.48954.malonedeb@gandwana.ubuntu.com> Message-ID: <20060927101902.5066.60634.malone@gangotri.ubuntu.com> If the maintainer is the only one who can upgrade this package, and he doesn't have the time to do it, then it could last a while I guess. -- kernel_image target fails with kernel 2.6.18-rc https://launchpad.net/bugs/58570 From jerome.lacoste at gmail.com Wed Sep 27 12:33:04 2006 From: jerome.lacoste at gmail.com (Jerome Lacoste) Date: Wed, 27 Sep 2006 12:33:04 -0000 Subject: [Bug 53216] update References: <20060717081940.2082.7456.malonedeb@gandwana.ubuntu.com> Message-ID: <5a2cf1f60609270533r458f80ccv35b147c1c40c4259@mail.gmail.com> I've made a quick test today: - upgraded kernel to Linux dolcevita 2.6.15-27-686 #1 SMP PREEMPT Sat Sep 16 02:13:27 UTC 2006 i686 GNU/Linux - upgraded skype to 1.3.0_37 beta - rebooted machine (without vmware modules) Started skype. Chatted. Didn't hang. Started vmware. Chattet didn't hang. So either the problem is gone for me, or most probably, the problem needs for the kernel to have some uptime to be triggered. I will thus restart and avoid loading the vmware module for a week or 2 as to test if skype ends up hanging the machine or not. Then I will load the tainting module. -- BUG() report in getnstimeofday: soft lockup https://launchpad.net/bugs/53216 From humberto.ortiz at gmail.com Wed Sep 27 13:10:20 2006 From: humberto.ortiz at gmail.com (Humberto Ortiz-Zuazaga) Date: Wed, 27 Sep 2006 13:10:20 -0000 Subject: [Bug 62614] Kernel panic when hotsyncing palm. References: <20060927131020.5066.2204.malonedeb@gangotri.ubuntu.com> Message-ID: <20060927131020.5066.2204.malonedeb@gangotri.ubuntu.com> Public bug reported: When I try to hotsync my Samsung SPH-i500 to my Fujitsu P2120 laptop using a USB connection I usually get a kernel panic. This setup worked under Hoary, broke in Dapper (see Bug #39518), and still seems to be a problem in Edgy. The frequency of crashes seems to have gone down in Edgy, but I still see them, here's a portion of the kern.log after the most recent crash: Sep 27 08:38:19 localhost kernel: [17182064.124000] visor ttyUSB0: Handspring Visor / Palm OS converter now disconnected from ttyUSB0 Sep 27 08:38:19 localhost kernel: [17182064.128000] BUG: unable to handle kernel paging request at virtual address 723d4ecb Sep 27 08:38:19 localhost kernel: [17182064.128000] printing eip: Sep 27 08:38:19 localhost kernel: [17182064.128000] c020b3a6 Sep 27 08:38:19 localhost kernel: [17182064.128000] *pde = 00000000 Sep 27 08:38:19 localhost kernel: [17182064.128000] Oops: 0000 [#1] Sep 27 08:38:19 localhost kernel: [17182064.128000] Modules linked in: cdc_acm visor usbserial binfmt_misc rfcomm l2cap bluetooth radeon drm longrun cpufreq_userspace cpufreq_stats freq_table cpufreq_powersave cpufreq_ondemand cpufreq_conservative video tc1100_wmi sbs sony_acpi pcc_acpi i2c_ec hotkey dev_acpi button battery container ac asus_acpi ipv6 xfrm_user xfrm4_tunnel tunnel4 ipcomp esp4 ah4 deflate zlib_deflate twofish serpent aes blowfish des sha256 sha1 crypto_null af_key dm_mod md_mod sr_mod sbp2 scsi_mod af_packet parport_pc lp parport wlan_scan_sta ath_pci ath_rate_sample wlan ath_hal pcmcia 8139cp tsdev serio_raw evdev psmouse pcspkr yenta_socket rsrc_nonstatic pcmcia_core rtc 8139too mii snd_ali5451 snd_ac97_codec snd_ac97_bus snd_pcm_oss snd_mixer_oss snd_pcm snd_timer snd i2c_ali1535 i2c_ali15x3 i2c_core efficeon_agp agpgart soundcore snd_page_alloc ext3 jbd ohci1394 ieee1394 ehci_hcd ohci_hcd usbcore ide_generic ide_cd cdrom ide_disk generic alim15x3 thermal processor fan fbcon tileblit font bitbl Sep 27 08:38:19 localhost kernel: t softcursor vesafb capability commoncap Sep 27 08:38:19 localhost kernel: [17182064.128000] CPU: 0 Sep 27 08:38:19 localhost kernel: [17182064.128000] EIP: 0060:[check_tty_count+54/160] Tainted: P VLI Sep 27 08:38:19 localhost kernel: [17182064.128000] EFLAGS: 00210246 (2.6.17-9-386 #2) Sep 27 08:38:19 localhost kernel: [17182064.128000] EIP is at check_tty_count+0x36/0xa0 Sep 27 08:38:19 localhost kernel: [17182064.128000] eax: 723d4e4f ebx: 00000000 ecx: ce08c170 edx: ce08c170 Sep 27 08:38:19 localhost kernel: [17182064.128000] esi: ce08c000 edi: c02e9fd1 ebp: 00000000 esp: cd061f18 Sep 27 08:38:19 localhost kernel: [17182064.128000] ds: 007b es: 007b ss: 0068 Sep 27 08:38:19 localhost kernel: [17182064.128000] Process events/0 (pid: 4, threadinfo=cd060000 task=cefc0a70) Sep 27 08:38:19 localhost kernel: [17182064.128000] Stack: cefc0a70 c96605e0 cefc0a70 cef9e19c ced45e0c ce08c13c ce08c000 00200296 Sep 27 08:38:19 localhost kernel: [17182064.128000] c020cf12 cd061f54 00200086 00000000 ce08c13c ce7a96c0 00200296 ce08c000 Sep 27 08:38:19 localhost kernel: [17182064.128000] c0127771 003d0afe 00000000 00000000 ce7a96c8 ce7a96d8 c020cee0 cd060000 Sep 27 08:38:19 localhost kernel: [17182064.128000] Call Trace: Sep 27 08:38:19 localhost kernel: [17182064.128000] do_tty_hangup+0x32/0x330 run_workqueue+0x61/0xd0 Sep 27 08:38:19 localhost kernel: [17182064.128000] do_tty_hangup+0x0/0x330 worker_thread+0x117/0x140 Sep 27 08:38:19 localhost kernel: [17182064.128000] default_wake_function+0x0/0x10 kthread+0xa7/0xe0 Sep 27 08:38:19 localhost kernel: [17182064.128000] worker_thread+0x0/0x140 kthread+0x0/0xe0 Sep 27 08:38:19 localhost kernel: [17182064.128000] kernel_thread_helper+0x5/0x10 Sep 27 08:38:20 localhost kernel: [17182064.128000] Code: 80 70 01 00 00 8b 08 8d 74 26 00 8d 96 70 01 00 00 31 db 39 d0 75 04 eb 0f 89 c1 83 c3 01 8b 01 8d 74 26 00 39 ca 75 f1 8b 46 04 <81> 78 7c 04 00 02 00 74 3d 8b 86 b8 00 00 00 39 c3 74 28 89 44 Sep 27 08:38:20 localhost kernel: [17182064.128000] EIP: [check_tty_count+54/160] check_tty_count+0x36/0xa0 SS:ESP 0068:cd061f18 ** Affects: linux-source-2.6.15 (Ubuntu) Importance: Undecided Status: Unconfirmed -- Kernel panic when hotsyncing palm. https://launchpad.net/bugs/62614 From rlrevell at joe-job.com Wed Sep 27 14:35:12 2006 From: rlrevell at joe-job.com (Lee Revell) Date: Wed, 27 Sep 2006 14:35:12 -0000 Subject: [Bug 58570] Re: kernel_image target fails with kernel 2.6.18-rc References: <20060902121437.30936.48954.malonedeb@gandwana.ubuntu.com> Message-ID: <20060927143512.5117.50375.malone@gangotri.ubuntu.com> Is there any workaround? I am dead in the water here - cannot upgrade to 2.6.18. This should be given "blocker" priority. -- kernel_image target fails with kernel 2.6.18-rc https://launchpad.net/bugs/58570 From giuseppe at iuculano.it Wed Sep 27 15:00:49 2006 From: giuseppe at iuculano.it (Giuseppe Iuculano) Date: Wed, 27 Sep 2006 15:00:49 -0000 Subject: [Bug 58570] Re: kernel_image target fails with kernel 2.6.18-rc References: <20060902121437.30936.48954.malonedeb@gandwana.ubuntu.com> Message-ID: <20060927150049.10355.17470.malone@gandwana.ubuntu.com> If you have this urgency, you can install the debian unstable package, I used it for 2.6.18, it works. wget http://ftp.debian.org/debian/pool/main/k/kernel-package/kernel- package_10.057_all.deb -- kernel_image target fails with kernel 2.6.18-rc https://launchpad.net/bugs/58570 From jsmidt at byu.edu Wed Sep 27 15:28:52 2006 From: jsmidt at byu.edu (Joseph Smidt) Date: Wed, 27 Sep 2006 15:28:52 -0000 Subject: [Bug 62553] Suspend doesn't resume on Toshiba A105-S4004 Notebook References: <20060927033207.5066.28332.malonedeb@gangotri.ubuntu.com> Message-ID: <20060927152852.5117.78482.launchpad@canonical@gangotri.ubuntu.com> Public bug reported: I I own a Toshiba Satellite A105-S4004 Notebook and am running Dapper. The Laptop always falls asleep, an sometimes wakes up, but the majority of times it either the screen does not come back on or the screen comes back on but the keyboard doesn't work. Here are specs: http://www.csd.toshiba.com/cgi- bin/tais/su/su_sc_outFrm.jsp?moid=1310946&ct=DS&soid=1337661&BV_SessionID=@@@@2007317194.1159327509@@@@&BV_EngineID=ccccaddillmdjhlcgfkceghdgngdgnn.0 Here is some info: This machine can be identified by: sys_vendor = "TOSHIBA" sys_product = "Satellite A105" sys_version = "PSAA8U-02000U" bios_version = " 1.30 " Here is (lspci ; lspci -n) |sort: 00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 02) 00:1c.2 0604: 8086:27d4 (rev 02) 00:1c.2 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 3 (rev 02) 00:1d.0 0c03: 8086:27c8 (rev 02) 00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #1 (rev 02) 00:1d.1 0c03: 8086:27c9 (rev 02) 00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #2 (rev 02) 00:1d.2 0c03: 8086:27ca (rev 02) 00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #3 (rev 02) 00:1d.3 0c03: 8086:27cb (rev 02) 00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #4 (rev 02) 00:1d.7 0c03: 8086:27cc (rev 02) 00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 02) 00:1e.0 0604: 8086:2448 (rev e2) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2) 00:1f.0 0601: 8086:27b9 (rev 02) 00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02) 00:1f.2 0101: 8086:27c4 (rev 02) 00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7 Family) Serial ATA Storage Controller IDE (rev 02) 00:1f.3 0c05: 8086:27da (rev 02) 00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 02) 05:00.0 0280: 8086:4222 (rev 02) 05:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG Network Connection (rev 02) 07:06.0 0607: 104c:8039 07:06.0 CardBus bridge: Texas Instruments Unknown device 8039 07:06.1 0c00: 104c:803a 07:06.1 FireWire (IEEE 1394): Texas Instruments Unknown device 803a 07:06.2 0180: 104c:803b 07:06.2 Mass storage controller: Texas Instruments Unknown device 803b 07:06.3 0805: 104c:803c 07:06.3 Class 0805: Texas Instruments Unknown device 803c 07:08.0 0200: 8086:1092 (rev 02) 07:08.0 Ethernet controller: Intel Corporation Intel(R) PRO/100 VE Network Connection (rev 02) Here is lspci -vv 0000:00:00.0 Host bridge: Intel Corporation Mobile Memory Controller Hub (rev 03) Subsystem: Toshiba America Info Systems: Unknown device ff10 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- 0000:00:02.0 VGA compatible controller: Intel Corporation Mobile Integrated Graphics Controller (rev 03) (prog-if 00 [VGA]) Subsystem: Toshiba America Info Systems: Unknown device ff10 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- 0000:00:02.1 Display controller: Intel Corporation Mobile Integrated Graphics Controller (rev 03) Subsystem: Toshiba America Info Systems: Unknown device ff10 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- 0000:00:1b.0 0403: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 02) Subsystem: Toshiba America Info Systems: Unknown device ff10 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- 0000:00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Reset- FastB2B- Capabilities: 0000:00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Reset- FastB2B- Capabilities: 0000:00:1c.2 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 3 (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Reset- FastB2B- Capabilities: 0000:00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #1 (rev 02) (prog-if 00 [UHCI]) Subsystem: Toshiba America Info Systems: Unknown device ff10 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- 0000:00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Reset- FastB2B- Capabilities: 0000:00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02) Subsystem: Toshiba America Info Systems: Unknown device ff10 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- 0000:00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7 Family) Serial ATA Storage Controllers cc=IDE (rev 02) (prog-if 80 [Master]) Subsystem: Toshiba America Info Systems: Unknown device ff10 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Region 1: I/O ports at Region 2: I/O ports at Region 3: I/O ports at Region 4: I/O ports at 18b0 [size=16] Capabilities: 0000:00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 02) Subsystem: Toshiba America Info Systems: Unknown device ff10 Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- 0000:07:06.0 CardBus bridge: Texas Instruments: Unknown device 8039 Subsystem: Toshiba America Info Systems: Unknown device ff10 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- Reset+ 16bInt+ PostWrite+ 16-bit legacy interface ports at 0001 0000:07:06.1 FireWire (IEEE 1394): Texas Instruments: Unknown device 803a (prog-if 10 [OHCI]) Subsystem: Toshiba America Info Systems: Unknown device ff10 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- 0000:07:06.2 Mass storage controller: Texas Instruments: Unknown device 803b Subsystem: Toshiba America Info Systems: Unknown device ff10 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- 0000:07:06.3 0805: Texas Instruments: Unknown device 803c (prog-if 01) Subsystem: Toshiba America Info Systems: Unknown device ff10 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- 0000:07:08.0 Ethernet controller: Intel Corporation: Unknown device 1092 (rev 02) Subsystem: Toshiba America Info Systems: Unknown device ff10 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- ** Affects: linux-source-2.6.15 (Ubuntu) Importance: Undecided Status: Unconfirmed -- Suspend doesn't resume on Toshiba A105-S4004 Notebook https://launchpad.net/bugs/62553 From pandisv at yahoo.co.uk Wed Sep 27 15:28:52 2006 From: pandisv at yahoo.co.uk (Vassilis Pandis) Date: Wed, 27 Sep 2006 15:28:52 -0000 Subject: [Bug 62553] Re: Suspend doesn't resume on Toshiba A105-S4004 Notebook References: <20060927033207.5066.28332.malonedeb@gangotri.ubuntu.com> Message-ID: <20060927152852.5117.70755.launchpad@gangotri.ubuntu.com> ** Changed in: Ubuntu Sourcepackagename: None => linux-source-2.6.15 -- Suspend doesn't resume on Toshiba A105-S4004 Notebook https://launchpad.net/bugs/62553 From ryan.m.lists at gmail.com Wed Sep 27 15:55:28 2006 From: ryan.m.lists at gmail.com (rmmst49) Date: Wed, 27 Sep 2006 15:55:28 -0000 Subject: [Bug 57858] Re: com2.6.15.7-ubuntu1 source compilation error at drivers/usb/net/zd1211/zd1205.o References: <20060827035747.17263.81509.malonedeb@gangotri.ubuntu.com> <20060927033833.10311.6115.malone@gandwana.ubuntu.com> Message-ID: it wasn't a custom kernel. it wsa th ubuntu src's with the stock ubuntu config unchanged, with kernel dev programs from the ubuntu repositories. I only changed the config afterward to get rid of this driver, then it compiled just fine. Nice job taking a month to get to it though, On 9/26/06, Eric Butler wrote: > Unconfirmed ->Rejected. > > As per https://wiki.ubuntu.com/KernelCustomBuild > > "Building and using a custom kernel will make it very difficult to get > support for your system. You will not be allowed to file bugs on the > custom-built kernel (if you do, they will be Rejected without > explanation)." > > > ** Changed in: linux-source-2.6.15 (Ubuntu) > Status: Unconfirmed => Rejected > > -- > com2.6.15.7-ubuntu1 source compilation error at drivers/usb/net/zd1211/zd1205.o > https://launchpad.net/bugs/57858 > -- com2.6.15.7-ubuntu1 source compilation error at drivers/usb/net/zd1211/zd1205.o https://launchpad.net/bugs/57858 From mortenera at gmail.com Wed Sep 27 16:12:50 2006 From: mortenera at gmail.com (asbesto) Date: Wed, 27 Sep 2006 16:12:50 -0000 Subject: [Bug 34651] Re: ACPI does not work on Asus motherboard with nForce chipset References: <20060312213644.17044.65036.malonedeb@gangotri.ubuntu.com> Message-ID: <20060927161250.10355.25330.malone@gandwana.ubuntu.com> Me too: ASUS K5N8-E nVIDIA chipset xubuntu freshly installed it was a real HORROR: xubuntu slow down at boot with hard disk led always ON, and system really slow with acpi and APIC support enabled on bios my ethernet card was seen as ... a FIREWIRE card!!! 8( acpi=off was only a workaround but NO PS/2 MOUSE can be configured, because is not seen in /proc/bus/input/devices!!! Also I had strange system locks about 5 minutes after the boot up, with no message in log files. HORROR!!! pci=nommconf worked well for me, now i'm happy. :) p.s. i HATE LINUX for these things :( -- ACPI does not work on Asus motherboard with nForce chipset https://launchpad.net/bugs/34651 From boricua at despiertapr.com Wed Sep 27 17:08:53 2006 From: boricua at despiertapr.com (boricua) Date: Wed, 27 Sep 2006 17:08:53 -0000 Subject: [Bug 52648] locks system configring linksys card References: <20060711145303.19629.87936.malonedeb@gandwana.ubuntu.com> Message-ID: <20060927170853.10311.72621.launchpad@canonical@gandwana.ubuntu.com> Public bug reported: Binary package hint: gnome-network not sure about packahge name the application is network-admin configuring linksys wusb54g wireless usb card locks the system prlibre at mobile:~$ cat /etc/network/interfaces auto lo iface lo inet loopback auto eth0 iface eth0 inet dhcp auto eth1 iface eth1 inet dhcp auto eth2 iface eth2 inet dhcp auto ath0 iface ath0 inet dhcp auto wlan0 iface wlan0 inet dhcp iface rausb0 inet dhcp wireless-essid PONCE auto rausb0 prlibre at mobile:~$ cat /etc/hosts 127.0.0.1 localhost mobile 127.0.1.1 mobile 192.168.1.104 lares.despiertapr.com lares # The following lines are desirable for IPv6 capable hosts ::1 ip6-localhost ip6-loopback fe00::0 ip6-localnet ff00::0 ip6-mcastprefix ff02::1 ip6-allnodes ff02::2 ip6-allrouters ff02::3 ip6-allhosts chipset is ralinktech RT2570 Jul 11 10:46:33 localhost kernel: [17221001.612000] usb 3-3: new high speed USB device using ehci_hcd and address 2 Jul 11 10:46:35 localhost kernel: [17221003.564000] RT25usb Driver version 1.1.0 usbcore 130692 4 rt2570,ehci_hcd,uhci_hcd lock occurs both from network-admin and from commnd line using iwconfig and dhclient this is a resubmision of bug 52559 as requeted by rejector ** Affects: linux-source-2.6.15 (Ubuntu) Importance: Undecided Status: Needs Info -- locks system configring linksys card https://launchpad.net/bugs/52648 From pandisv at yahoo.co.uk Wed Sep 27 17:08:53 2006 From: pandisv at yahoo.co.uk (Vassilis Pandis) Date: Wed, 27 Sep 2006 17:08:53 -0000 Subject: [Bug 52648] Re: locks system configring linksys card References: <20060711145303.19629.87936.malonedeb@gandwana.ubuntu.com> Message-ID: <20060927170853.10311.46109.launchpad@gandwana.ubuntu.com> ** Changed in: gnome-network (Ubuntu) Sourcepackagename: gnome-network => linux-source-2.6.15 -- locks system configring linksys card https://launchpad.net/bugs/52648 From boricua at despiertapr.com Wed Sep 27 17:26:25 2006 From: boricua at despiertapr.com (boricua) Date: Wed, 27 Sep 2006 17:26:25 -0000 Subject: [Bug 52648] Re: locks system configring linksys card References: <20060711145303.19629.87936.malonedeb@gandwana.ubuntu.com> Message-ID: <20060927172625.10355.84855.malone@gandwana.ubuntu.com> here is /var/log/messages when plugin usb card Sep 27 13:08:28 localhost kernel: [17179797.676000] unregister_netdev( ) Sep 27 13:08:31 localhost kernel: [17179801.948000] usb 3-2: new high speed USB device using ehci_hcd and address 4 Sep 27 13:08:31 localhost kernel: [17179802.264000] idVendor = 0x13b1, idProduct = 0xd Sep 27 13:08:31 localhost kernel: [17179802.264000] INIT bRadio=1 Sep 27 13:08:32 localhost kernel: [17179802.944000] RT25usb Driver version 1.1.0 Sep 27 13:08:43 localhost kernel: [17179814.484000] rausb0: no IPv6 routers present Sep 27 13:10:49 localhost kernel: [17179939.788000] rausb0: unable to signal thread Sep 27 13:10:49 localhost kernel: [17179939.944000] RT25usb Driver version 1.1.0 ** Attachment added: "lspci-vv.log" http://librarian.launchpad.net/4521966/lspci-vv.log -- locks system configring linksys card https://launchpad.net/bugs/52648 From boricua at despiertapr.com Wed Sep 27 17:27:09 2006 From: boricua at despiertapr.com (boricua) Date: Wed, 27 Sep 2006 17:27:09 -0000 Subject: [Bug 52648] Re: locks system configring linksys card References: <20060711145303.19629.87936.malonedeb@gandwana.ubuntu.com> Message-ID: <20060927172709.5117.4740.malone@gangotri.ubuntu.com> lspci-vvn.log ** Attachment added: "lspci-vvn.log" http://librarian.launchpad.net/4521970/lspci-vvn.log -- locks system configring linksys card https://launchpad.net/bugs/52648 From boricua at despiertapr.com Wed Sep 27 17:27:35 2006 From: boricua at despiertapr.com (boricua) Date: Wed, 27 Sep 2006 17:27:35 -0000 Subject: [Bug 52648] Re: locks system configring linksys card References: <20060711145303.19629.87936.malonedeb@gandwana.ubuntu.com> Message-ID: <20060927172735.5117.40616.malone@gangotri.ubuntu.com> dmseg ** Attachment added: "dmesg" http://librarian.launchpad.net/4521971/dmesg.log -- locks system configring linksys card https://launchpad.net/bugs/52648 From pandisv at yahoo.co.uk Wed Sep 27 17:29:04 2006 From: pandisv at yahoo.co.uk (Vassilis Pandis) Date: Wed, 27 Sep 2006 17:29:04 -0000 Subject: [Bug 52648] Re: locks system configring linksys card References: <20060711145303.19629.87936.malonedeb@gandwana.ubuntu.com> Message-ID: <20060927172904.5066.79507.launchpad@gangotri.ubuntu.com> ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Needs Info => Confirmed -- locks system configring linksys card https://launchpad.net/bugs/52648 From poget at medusa.bioc.aecom.yu.edu Wed Sep 27 17:51:27 2006 From: poget at medusa.bioc.aecom.yu.edu (pogets) Date: Wed, 27 Sep 2006 17:51:27 -0000 Subject: [Bug 38865] Re: sky2 driver freezing system after ifdown and ifup References: <20060409125752.32313.97119.malonedeb@gandwana.ubuntu.com> Message-ID: <20060927175127.10355.49164.malone@gandwana.ubuntu.com> I also wanted to mention that kernel 26 fixed the networking issue for me, and 27 broke it again (Marvell 88E8036 Fast Ethernet Controlleron Toshiba Satellite M55-S325 laptop). I assume that 27 uses sky2 again due to other people's problems. I just keep using 26 for now. Thanks, Sebastien -- sky2 driver freezing system after ifdown and ifup https://launchpad.net/bugs/38865 From ok1dtm at quick.cz Wed Sep 27 19:13:49 2006 From: ok1dtm at quick.cz (josef) Date: Wed, 27 Sep 2006 19:13:49 -0000 Subject: [Bug 57502] Re: JMicron PATA/SATA Controller does not work References: <20060823192235.13463.13121.malonedeb@gandwana.ubuntu.com> Message-ID: <20060927191349.5066.73702.malone@gangotri.ubuntu.com> Ubuntu 6.10 (Edgy Eft) Daily Build from 27 Sept. no worked! -- JMicron PATA/SATA Controller does not work https://launchpad.net/bugs/57502 From Corneliussen at gmail.com Wed Sep 27 20:04:19 2006 From: Corneliussen at gmail.com (Andcor) Date: Wed, 27 Sep 2006 20:04:19 -0000 Subject: [Bug 57502] Re: JMicron PATA/SATA Controller does not work References: <20060823192235.13463.13121.malonedeb@gandwana.ubuntu.com> Message-ID: <20060927200419.10311.99099.malone@gandwana.ubuntu.com> Why don't we stop talking about what did not work, so that we only talk about what does. We know the fix is on its way, so the only valuable information we can get is when someone tells that he/she has got it to work with an daily build. -- JMicron PATA/SATA Controller does not work https://launchpad.net/bugs/57502 From dave at minusvince.com Wed Sep 27 20:21:01 2006 From: dave at minusvince.com (Dave Perdue) Date: Wed, 27 Sep 2006 20:21:01 -0000 Subject: [Bug 56376] Re: [Dapper 6.06] Laptop - PCI cannot allocate resource for region 7 8 and 9 References: <20060814205122.20172.54370.malonedeb@gandwana.ubuntu.com> Message-ID: <20060927202101.5066.34711.malone@gangotri.ubuntu.com> I've got an HP nx6125 with the same errors as above. The errors occur on Ubuntu/Kubuntu/Ubuntu Server. Let me know if you'd like any information from me. -- [Dapper 6.06] Laptop - PCI cannot allocate resource for region 7 8 and 9 https://launchpad.net/bugs/56376 From dave at minusvince.com Wed Sep 27 20:29:55 2006 From: dave at minusvince.com (Dave Perdue) Date: Wed, 27 Sep 2006 20:29:55 -0000 Subject: [Bug 56376] Re: [Dapper 6.06] Laptop - PCI cannot allocate resource for region 7 8 and 9 References: <20060814205122.20172.54370.malonedeb@gandwana.ubuntu.com> Message-ID: <20060927202955.10355.59088.malone@gandwana.ubuntu.com> Oh yeah, my laptop has an AMD Turion 64 (ML-37), I'm running with noapic option (doesn't make a difference if it's passed or not). I saw using dmesg that the error is complaining about these guys: $lspci [...] 0000:00:04.0 PCI Bridge: ATI Technologies Inc: Unknown device 5a36 0000:00:05.0 PCI Bridge: ATI Technologies Inc: Unknown device 5a37 I believe that's my PCI Express54 slot...maybe. -- [Dapper 6.06] Laptop - PCI cannot allocate resource for region 7 8 and 9 https://launchpad.net/bugs/56376 From victor.petrov at gmail.com Wed Sep 27 20:40:58 2006 From: victor.petrov at gmail.com (Victor Petrov) Date: Wed, 27 Sep 2006 20:40:58 -0000 Subject: [Bug 57502] Re: JMicron PATA/SATA Controller does not work References: <20060823192235.13463.13121.malonedeb@gandwana.ubuntu.com> <20060927200419.10311.99099.malone@gandwana.ubuntu.com> Message-ID: Finally somebody said something worth reading. -- JMicron PATA/SATA Controller does not work https://launchpad.net/bugs/57502 From towsonu2003 at gmail.com Thu Sep 28 00:41:19 2006 From: towsonu2003 at gmail.com (towsonu2003) Date: Thu, 28 Sep 2006 00:41:19 -0000 Subject: [Bug 62576] Re: Dapper instalation freezes at 15% on sony vaio vgn-s5hp References: <20060927082321.10355.88370.malonedeb@gandwana.ubuntu.com> Message-ID: <20060928004119.5117.45604.malone@gangotri.ubuntu.com> request in linux-source 2.6.15 as: [quote] I tried alternate build. Installation worked fine, but i obtained an "Kernel panic - not syncing..." [/quote] ** Changed in: Ubuntu Sourcepackagename: None => ubiquity Assignee: (unassigned) => Ubuntu Laptop Team ** Also affects: linux-source-2.6.15 (Ubuntu) Importance: Undecided Status: Unconfirmed -- Dapper instalation freezes at 15% on sony vaio vgn-s5hp https://launchpad.net/bugs/62576 From j.reinaldo.rocha at gmail.com Thu Sep 28 00:51:38 2006 From: j.reinaldo.rocha at gmail.com (jreinaldo) Date: Thu, 28 Sep 2006 00:51:38 -0000 Subject: [Bug 62164] "Sundance" network card driver References: <20060924133111.17562.26295.malonedeb@gandwana.ubuntu.com> Message-ID: <20060928005138.10311.18070.launchpad@canonical@gandwana.ubuntu.com> Public bug reported: I imagine this is a bug! I have a net card that uses the "sundance" driver. Every time I update the kernel I have to replace the module "sundance.ko" in the "lib" folder with a version compiled in an old kernel version (or to recompile and replace it) I would like you to correct the module for the next updates? Could it be? Thanks in advance. ** Affects: soyuz (upstream) Importance: Undecided Status: Rejected ** Affects: linux-source-2.6.15 (Ubuntu) Importance: Undecided Status: Confirmed ** Affects: Mandriva Importance: Undecided Status: Rejected -- "Sundance" network card driver https://launchpad.net/bugs/62164 From towsonu2003 at gmail.com Thu Sep 28 00:51:37 2006 From: towsonu2003 at gmail.com (towsonu2003) Date: Thu, 28 Sep 2006 00:51:37 -0000 Subject: [Bug 62164] Re: "Sundance" network card driver References: <20060924133111.17562.26295.malonedeb@gandwana.ubuntu.com> Message-ID: <20060928005138.10311.82831.malone@gandwana.ubuntu.com> note to the devels: is bug # 49772 related? ** Changed in: Ubuntu Sourcepackagename: None => linux-source-2.6.15 Status: Needs Info => Confirmed -- "Sundance" network card driver https://launchpad.net/bugs/62164 From towsonu2003 at gmail.com Thu Sep 28 00:52:41 2006 From: towsonu2003 at gmail.com (towsonu2003) Date: Thu, 28 Sep 2006 00:52:41 -0000 Subject: [Bug 62164] Re: "Sundance" network card driver References: <20060924133111.17562.26295.malonedeb@gandwana.ubuntu.com> Message-ID: <20060928005242.10355.1732.malone@gandwana.ubuntu.com> > Is this enough? thanks for the fast reply. I think for now it is. the developers might want more info though later on. -- "Sundance" network card driver https://launchpad.net/bugs/62164 From ivoks at grad.hr Thu Sep 28 01:49:55 2006 From: ivoks at grad.hr (=?utf-8?q?Ante_Karamati=C4=87?=) Date: Thu, 28 Sep 2006 01:49:55 -0000 Subject: [Bug 57502] Re: JMicron PATA/SATA Controller does not work References: <20060823192235.13463.13121.malonedeb@gandwana.ubuntu.com> <20060926001701.17562.63886.launchpad@gandwana.ubuntu.com> Message-ID: <1159408195.10293.9.camel@i8600.gfr.local> Na Uto, 2006-09-26 u 00:17 +0000, Ben Collins je napisao: > ** Changed in: linux-source-2.6.17 (Ubuntu) > Target: None => ubuntu-6.10-beta Please, notice Target release; ubuntu 6.10 beta. There is no need for panic. It is fixed and tested on different jmicron ide/sata controllers and it does work. Wait for 6.10 beta release, which should be in a day or two. https://wiki.ubuntu.com/EdgyReleaseSchedule -- Ante Karamatić PGP: 0xD3BDA225 -- JMicron PATA/SATA Controller does not work https://launchpad.net/bugs/57502 From mjg59 at codon.org.uk Thu Sep 28 02:10:15 2006 From: mjg59 at codon.org.uk (Matthew Garrett) Date: Thu, 28 Sep 2006 02:10:15 -0000 Subject: [Bug 57502] Re: JMicron PATA/SATA Controller does not work References: <20060823192235.13463.13121.malonedeb@gandwana.ubuntu.com> Message-ID: <20060928021015.5117.29177.malone@gangotri.ubuntu.com> Just to make that clearer - we have added code that we believe fixes the problem in the cases we've been able to test. It's possible that there are other systems that will still not work, since there's a wide range of systems based on this hardware and we don't have a great deal available for local testing. If it doesn't work in the beta release, please let us know. -- JMicron PATA/SATA Controller does not work https://launchpad.net/bugs/57502 From sean.sweng at gmail.com Thu Sep 28 03:18:02 2006 From: sean.sweng at gmail.com (Sean Kelley) Date: Thu, 28 Sep 2006 03:18:02 -0000 Subject: [Bug 62391] kernel-2.6.15-27-686 breaks Ibm Thinkpad T60 Suspend mode References: <20060926013524.17606.51652.malonedeb@gandwana.ubuntu.com> Message-ID: <20060928031802.10355.67931.launchpad@canonical@gandwana.ubuntu.com> Public bug reported: Since installing kernel-2.6.15-27-686, my Thinkpad T60 has been unable to suspend to sleep mode. I merely locks the display and blanks the screen. I have since reverted back to the previous kernel and sleep is working once again. Sean ** Affects: linux-source-2.6.15 (Ubuntu) Importance: Undecided Status: Unconfirmed -- kernel-2.6.15-27-686 breaks Ibm Thinkpad T60 Suspend mode https://launchpad.net/bugs/62391 From towsonu2003 at gmail.com Thu Sep 28 03:18:02 2006 From: towsonu2003 at gmail.com (towsonu2003) Date: Thu, 28 Sep 2006 03:18:02 -0000 Subject: [Bug 62391] Re: kernel-2.6.15-27-686 breaks Ibm Thinkpad T60 Suspend mode References: <20060926013524.17606.51652.malonedeb@gandwana.ubuntu.com> Message-ID: <20060928031802.10355.46760.launchpad@gandwana.ubuntu.com> ** Changed in: Ubuntu Sourcepackagename: None => linux-source-2.6.15 -- kernel-2.6.15-27-686 breaks Ibm Thinkpad T60 Suspend mode https://launchpad.net/bugs/62391 From launchpad.20.zed2323 at xoxy.net Thu Sep 28 03:33:17 2006 From: launchpad.20.zed2323 at xoxy.net (Zed Lopez) Date: Thu, 28 Sep 2006 03:33:17 -0000 Subject: [Bug 61485] Edgy Knot 3 i386 alternative install CD: did server install, got generic kernel References: <20060920183129.17562.16299.malonedeb@gandwana.ubuntu.com> Message-ID: <20060928033317.10355.88855.launchpad@canonical@gandwana.ubuntu.com> Public bug reported: After selecting a server install from the alternative installation CD, the generic kernel was installed instead of the server kernel. ** Affects: linux-meta (Ubuntu) Importance: Undecided Status: Unconfirmed -- Edgy Knot 3 i386 alternative install CD: did server install, got generic kernel https://launchpad.net/bugs/61485 From matt at genesi-usa.com Thu Sep 28 03:39:03 2006 From: matt at genesi-usa.com (Matt Sealey) Date: Thu, 28 Sep 2006 03:39:03 -0000 Subject: [Bug 61258] Not all ethernet ports listed on Pegasos, also names not "user-friendly" References: <20060919143436.23036.73784.malonedeb@gangotri.ubuntu.com> Message-ID: <20060928033903.10355.63808.launchpad@canonical@gandwana.ubuntu.com> Public bug reported: I downloaded the last updated Edgy netboot kernel from http://archive.ubuntu.com/ubuntu/dists/edgy/main/installer- powerpc/current/images/powerpc/netboot/ First thing I noticed wrong on Pegasos was that the Marvell Gigabit Ethernet is not listed for the network interfaces. This requires a kernel module and/or a hotplug patch. Secondly the names are not listed in a user-friendly manner; on Edgy we have eth0: Ethernet or Fast Ethernet eth1: VIA Technologies, Inc. VT6102 [Rhine II] Debian 3.1r3 PowerPC lists eth0: Galileo Technology Ltd. MV64360/MV64361/MV64362 builtin Gigabit eth1: VIA Technologies, Inc. VT6102 [Rhine II] eth2: FireWire Ethernet This is much easier to work out which is which. Even if Edgy had the module for Marvell Gigabit, it would still list it as Ethernet or Fast Ethernet leaving the user confused as to which was FireWire an which was Marvell. ** Affects: linux-meta (Ubuntu) Importance: Undecided Status: Unconfirmed -- Not all ethernet ports listed on Pegasos, also names not "user-friendly" https://launchpad.net/bugs/61258 From towsonu2003 at gmail.com Thu Sep 28 03:33:17 2006 From: towsonu2003 at gmail.com (towsonu2003) Date: Thu, 28 Sep 2006 03:33:17 -0000 Subject: [Bug 61485] Re: Edgy Knot 3 i386 alternative install CD: did server install, got generic kernel References: <20060920183129.17562.16299.malonedeb@gandwana.ubuntu.com> Message-ID: <20060928033317.10355.77657.launchpad@gandwana.ubuntu.com> ** Changed in: Ubuntu Sourcepackagename: None => linux-meta -- Edgy Knot 3 i386 alternative install CD: did server install, got generic kernel https://launchpad.net/bugs/61485 From towsonu2003 at gmail.com Thu Sep 28 03:39:03 2006 From: towsonu2003 at gmail.com (towsonu2003) Date: Thu, 28 Sep 2006 03:39:03 -0000 Subject: [Bug 61258] Re: Not all ethernet ports listed on Pegasos, also names not "user-friendly" References: <20060919143436.23036.73784.malonedeb@gangotri.ubuntu.com> Message-ID: <20060928033903.10355.70053.launchpad@gandwana.ubuntu.com> ** Changed in: Ubuntu Sourcepackagename: None => linux-meta -- Not all ethernet ports listed on Pegasos, also names not "user-friendly" https://launchpad.net/bugs/61258 From crimsun at fungus.sh.nu Thu Sep 28 03:42:44 2006 From: crimsun at fungus.sh.nu (Daniel T Chen) Date: Thu, 28 Sep 2006 03:42:44 -0000 Subject: [Bug 62716] Re: USB MIDI Keyboard mistaken for a sound output References: <20060928033047.5066.15043.malonedeb@gangotri.ubuntu.com> Message-ID: <20060928034244.5066.26394.malone@gangotri.ubuntu.com> *** This bug is a duplicate of bug 46996 *** Fixed in Edgy already. ** Changed in: Ubuntu Sourcepackagename: None => alsa-driver Status: Unconfirmed => Fix Released ** This bug has been marked a duplicate of bug 46996 Hotplugged sound devices get sound card index of 0 instead of PCI card -- USB MIDI Keyboard mistaken for a sound output https://launchpad.net/bugs/62716 From crimsun at fungus.sh.nu Thu Sep 28 03:44:02 2006 From: crimsun at fungus.sh.nu (Daniel T Chen) Date: Thu, 28 Sep 2006 03:44:02 -0000 Subject: [Bug 46996] Re: Hotplugged sound devices get sound card index of 0 instead of PCI card References: <20060527221609.6729.24522.malonedeb@gangotri.ubuntu.com> Message-ID: <20060928034402.5066.2769.launchpad@gangotri.ubuntu.com> ** Bug 62716 has been marked a duplicate of this bug -- Hotplugged sound devices get sound card index of 0 instead of PCI card https://launchpad.net/bugs/46996 From launchpad.net at max.e4ward.com Thu Sep 28 04:39:01 2006 From: launchpad.net at max.e4ward.com (Marcus) Date: Thu, 28 Sep 2006 04:39:01 -0000 Subject: [Bug 62182] Ubuntu can only hibernate once References: <20060924155546.17606.39657.malonedeb@gandwana.ubuntu.com> Message-ID: <20060928043901.5117.483.launchpad@canonical@gangotri.ubuntu.com> Public bug reported: In Ubundu Dapper 6.06, the hibernate button only works once (the first time after booting). When I attempt to hibernate a second time, the system simply goes to screen lock. ** Affects: linux-source-2.6.15 (Ubuntu) Importance: Undecided Status: Confirmed -- Ubuntu can only hibernate once https://launchpad.net/bugs/62182 From towsonu2003 at gmail.com Thu Sep 28 04:33:14 2006 From: towsonu2003 at gmail.com (towsonu2003) Date: Thu, 28 Sep 2006 04:33:14 -0000 Subject: [Bug 48174] Re: Resume from hibernate produces an oops References: <20060603080642.2224.78617.malonedeb@gangotri.ubuntu.com> Message-ID: <20060928043314.10311.24050.launchpad@gandwana.ubuntu.com> ** Summary changed: - linux-image-2.6.15-23-k7 + Resume from hibernate produces an oops ** Description changed: Resume from hibernate produces an oops. I have to reinsert my network device module sis900 and restart dhclient as the hibernate script is a casualty of the oops. It doesn't seem to happen every time. I'm going to attach my last log and then make sure I can get it with an untainted (by nvidia) kernel. + + [summary was: linux-image-2.6.15-23-k7] -- Resume from hibernate produces an oops https://launchpad.net/bugs/48174 From towsonu2003 at gmail.com Thu Sep 28 04:39:01 2006 From: towsonu2003 at gmail.com (towsonu2003) Date: Thu, 28 Sep 2006 04:39:01 -0000 Subject: [Bug 62182] Re: Ubuntu can only hibernate once References: <20060924155546.17606.39657.malonedeb@gandwana.ubuntu.com> Message-ID: <20060928043901.5117.51807.malone@gangotri.ubuntu.com> [previous comment confirms I believe, no dupes found] thanks for your bug report :) ** Changed in: Ubuntu Sourcepackagename: None => linux-source-2.6.15 Status: Unconfirmed => Confirmed -- Ubuntu can only hibernate once https://launchpad.net/bugs/62182 From towsonu2003 at gmail.com Thu Sep 28 04:40:04 2006 From: towsonu2003 at gmail.com (towsonu2003) Date: Thu, 28 Sep 2006 04:40:04 -0000 Subject: [Bug 32689] Re: Hibernate sometimes dont work References: <20060224083000.16638.47377.malonedeb@gandwana.ubuntu.com> Message-ID: <20060928044005.5117.71586.malone@gangotri.ubuntu.com> quoting previous comment needing response: Kernel team, do you consider this to be a feature or a bug? ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Unconfirmed => Needs Info -- Hibernate sometimes dont work https://launchpad.net/bugs/32689 From myriamg at gmail.com Thu Sep 28 06:27:21 2006 From: myriamg at gmail.com (Myrgen) Date: Thu, 28 Sep 2006 06:27:21 -0000 Subject: [Bug 59078] VIA 8235 embedded card not working: freezing desktop in Dapper References: <20060905194936.3977.27669.malonedeb@gandwana.ubuntu.com> Message-ID: <20060928062721.5117.66495.launchpad@canonical@gangotri.ubuntu.com> Public bug reported: I am new to Linux, and installed Ubuntu 5. I was very happy with it, no problems at all. Then I upgraded to Dapper Drake 6.06, and problems started popping up. 1) Video started 'hiccuping' 2) Audio was hiccuping too 3) Mouse pointer is sluggish, making it a nightmare to do anything 4) Eventhough the system recognizes a blank disk inserted, when trying to burn it, it asks me to insert a new blank disk, eventhough I tried even with a very little file. --- After doing a full reinstall, I added updates and apps one by one, changing some settings, one by one, rebooting each time. I finally found out that the source of the problem was the sound card: The system set the 'camera' as the default sound card, (Logitech webcam), shows only the microphone properties in the toolbar, and when I changed it to the VIA 82XX sound card I have, then rebooted, the sluggishness of the mouse came back. I reset the default to 'camera', rebooted, and everything was fine again. Everything except that I have no sound, hence no video either -- mesg | grep snd doesn't give any output at all. output of aplay -l: **** List of PLAYBACK Hardware Devices **** card 1: V8235 [VIA 8235], device 0: VIA 8235 [VIA 8235] Subdevices: 4/4 Subdevice #0: subdevice #0 Subdevice #1: subdevice #1 Subdevice #2: subdevice #2 Subdevice #3: subdevice #3 card 1: V8235 [VIA 8235], device 1: VIA 8235 [VIA 8235] Subdevices: 1/1 Subdevice #0: subdevice #0 -- I posted on:http://www.ubuntuforums.org/showthread.php?p=1368672#post1368672 Followed the advices received, but no joy. System unmanageable as soon as I attempt to open an audio or video file. I asked on IRC, and was told to post here. I reinstalled Breezy to be able to work, waiting for a possible solution. Thank you. ** Affects: linux-source-2.6.15 (Ubuntu) Importance: Undecided Status: Confirmed -- VIA 8235 embedded card not working: freezing desktop in Dapper https://launchpad.net/bugs/59078 From towsonu2003 at gmail.com Thu Sep 28 06:27:21 2006 From: towsonu2003 at gmail.com (towsonu2003) Date: Thu, 28 Sep 2006 06:27:21 -0000 Subject: [Bug 59078] Re: VIA 8235 embedded card not working: freezing desktop in Dapper References: <20060905194936.3977.27669.malonedeb@gandwana.ubuntu.com> Message-ID: <20060928062721.5117.78470.malone@gangotri.ubuntu.com> thanks for your bug report. does the same issue occur with edgy? did you have an opportunity to try that out? ** Changed in: Ubuntu Sourcepackagename: None => linux-source-2.6.15 Status: Unconfirmed => Confirmed -- VIA 8235 embedded card not working: freezing desktop in Dapper https://launchpad.net/bugs/59078 From svk+launchpad.net at iki.fi Thu Sep 28 07:01:40 2006 From: svk+launchpad.net at iki.fi (Sebastian von Knorring) Date: Thu, 28 Sep 2006 07:01:40 -0000 Subject: [Bug 62731] kernel BUG at arch/i386/lib/usercopy.c:608! References: <20060928070140.10355.14424.malonedeb@gandwana.ubuntu.com> Message-ID: <20060928070140.10355.14424.malonedeb@gandwana.ubuntu.com> Public bug reported: Binary package hint: linux-image-2.6.15-27-386 Used xine to watch DVB-T broadcast with a UMT-010 USB DVB-T receiver. Xine hung for some reason, tried to close the window but it would not close. The UI (Gnome/X) was unresponsive. Unplugged the reveicer from the USB port. Used Alt-Ctrl-F1 to get a text console, killed the xine process from the command line. -> kernel BUG: Sep 28 08:54:19 laptop kernel: [17179673.204000] usb 4-3: new high speed USB device using ehci_hcd and address 5 Sep 28 08:54:19 laptop kernel: [17179673.528000] dvb-usb: found a 'Hanftek UMT-010 DVB-T USB2.0' in cold state, will try to load a firmware Sep 28 08:54:19 laptop kernel: [17179673.616000] dvb-usb: downloading firmware from file 'dvb-usb-umt-010-02.fw' to the 'Cypress FX2' Sep 28 08:54:19 laptop kernel: [17179673.648000] dvb-usb: Hanftek UMT-010 DVB-T USB2.0 successfully initialized and connected. Sep 28 08:54:19 laptop kernel: [17179673.648000] usbcore: registered new driver dvb_usb_umt_010 Sep 28 08:54:20 laptop kernel: [17179673.852000] usb 4-3: USB disconnect, address 5 Sep 28 08:54:20 laptop kernel: [17179673.852000] dvb-usb: generic DVB-USB module successfully deinitialized and disconnected. Sep 28 08:54:21 laptop kernel: [17179675.604000] usb 4-3: new high speed USB device using ehci_hcd and address 6 Sep 28 08:54:21 laptop kernel: [17179675.736000] dvb-usb: found a 'Hanftek UMT-010 DVB-T USB2.0' in warm state. Sep 28 08:54:21 laptop kernel: [17179675.736000] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. Sep 28 08:54:22 laptop kernel: [17179675.752000] DVB: registering new adapter (Hanftek UMT-010 DVB-T USB2.0). Sep 28 08:54:22 laptop kernel: [17179675.752000] DVB: registering frontend 0 (Zarlink MT352 DVB-T)... Sep 28 08:54:22 laptop kernel: [17179675.768000] dvb-usb: Hanftek UMT-010 DVB-T USB2.0 successfully initialized and connected. Sep 28 09:39:34 laptop kernel: [17182388.144000] usb 4-3: USB disconnect, address 6 Sep 28 09:39:34 laptop kernel: [17182388.148000] dvb-usb: bulk message failed: -22 (4/-457990512) Sep 28 09:39:34 laptop kernel: [17182388.148000] mt352_write() to reg 89 failed (err = 0)! Sep 28 09:39:34 laptop kernel: [17182388.148000] dvb-usb: bulk message failed: -22 (4/-1072577056) Sep 28 09:39:34 laptop kernel: [17182388.148000] mt352_write() to reg 8a failed (err = 0)! Sep 28 09:39:34 laptop kernel: [17182388.148000] dvb-usb: bulk message failed: -22 (3/0) Sep 28 09:39:34 laptop kernel: [17182388.164000] dvb-usb: Hanftek UMT-010 DVB-T USB2.0 successfully deinitialized and disconnected. Sep 28 09:39:36 laptop kernel: [17182390.164000] ------------[ cut here ]------------ Sep 28 09:39:36 laptop kernel: [17182390.164000] kernel BUG at arch/i386/lib/usercopy.c:608! Sep 28 09:39:36 laptop kernel: [17182390.164000] invalid operand: 0000 [#1] Sep 28 09:39:36 laptop kernel: [17182390.164000] PREEMPT Sep 28 09:39:36 laptop kernel: [17182390.164000] Modules linked in: dvb_usb_umt_010 mt352 dvb_usb_dibusb_common dib3000mc dib3000_common dvb_usb dvb_core dvb_pll rfcomm l2cap bluetooth ppdev i915 drm acpi_cpufreq cpufreq_userspace cpufreq_stats freq_table cpufreq_powersave cpufreq_ondemand cpufreq_conservative video tc1100_wmi sony_acpi pcc_acpi hotkey dev_acpi container button acpi_sbs battery ac i2c_acpi_ec i2c_core ipv6 nls_iso8859_1 nls_cp437 vfat fat nls_utf8 ntfs dm_mod af_packet md_mod sr_mod sbp2 scsi_mod parport_pc lp parport pcmcia yenta_socket rsrc_nonstatic irda joydev crc_ccitt b44 mii pcmcia_core snd_intel8x0 snd_ac97_codec snd_ac97_bus snd_pcm_oss snd_mixer_oss snd_pcm snd_timer psmouse serio_raw snd soundcore snd_page_alloc rtc shpchp pci_hotplug intel_agp agpgart tsdev evdev usbhid ext3 jbd ide_generic ohci1394 ieee1394 ehci_hcd uhci_hcd usbcore ide_cd cdrom ide_disk piix generic thermal processor fan capability commoncap vga16fb vgastate fbcon tileblit font bitblit softcursor Sep 28 09:39:36 laptop kernel: [17182390.164000] CPU: 0 Sep 28 09:39:36 laptop kernel: [17182390.164000] EIP: 0060:[copy_to_user+62/80] Not tainted VLI Sep 28 09:39:36 laptop kernel: [17182390.164000] EFLAGS: 00010282 (2.6.15-27-386) Sep 28 09:39:36 laptop kernel: [17182390.164000] EIP is at copy_to_user+0x3e/0x50 Sep 28 09:39:36 laptop kernel: [17182390.164000] eax: 00000000 ebx: 095100f0 ecx: f0a8128c edx: c01f7705 Sep 28 09:39:36 laptop kernel: [17182390.164000] esi: 00000001 edi: f0a812c8 ebp: 00004970 esp: e818bf08 Sep 28 09:39:36 laptop kernel: [17182390.164000] ds: 007b es: 007b ss: 0068 Sep 28 09:39:36 laptop kernel: [17182390.164000] Process gxine (pid: 7840, threadinfo=e818a000 task=da56e550) Sep 28 09:39:36 laptop kernel: [17182390.164000] Stack: 00004970 f0a8128c f0a812c8 f8e9aa78 095100f0 00000001 f0a8128c e818a000 Sep 28 09:39:36 laptop kernel: [17182390.164000] f0a812d8 e818a000 c0174267 da488b00 c017427d df2fb820 e818bf60 00000000 Sep 28 09:39:36 laptop kernel: [17182390.164000] da488b00 00004970 e818bfa4 f8e9ae1b f0a812c8 00000800 095100f0 00004970 Sep 28 09:39:36 laptop kernel: [17182390.164000] Call Trace: Sep 28 09:39:36 laptop kernel: [17182390.164000] [pg0+950471288/1069368320] dvb_dmxdev_buffer_read+0x1c8/0x260 [dvb_core] Sep 28 09:39:36 laptop kernel: [17182390.164000] [do_pollfd+71/208] do_pollfd+0x47/0xd0 Sep 28 09:39:36 laptop kernel: [17182390.164000] [do_pollfd+93/208] do_pollfd+0x5d/0xd0 Sep 28 09:39:36 laptop kernel: [17182390.164000] [pg0+950472219/1069368320] dvb_dvr_read+0x2b/0x30 [dvb_core] Sep 28 09:39:36 laptop kernel: [17182390.164000] [vfs_read+150/336] vfs_read+0x96/0x150 Sep 28 09:39:36 laptop kernel: [17182390.164000] [sys_read+56/128] sys_read+0x38/0x80 Sep 28 09:39:36 laptop kernel: [17182390.164000] [sysenter_past_esp+84/121] sysenter_past_esp+0x54/0x79 Sep 28 09:39:36 laptop kernel: [17182390.164000] Code: b8 00 e0 ff ff 21 e0 89 da 01 ca 19 ff 39 50 18 83 df 00 85 ff 75 1e 89 4c 24 18 89 74 24 14 89 5c 24 10 5b 5e 5f e9 e2 fe ff ff <0f> 0b 60 02 b4 8f 30 c0 eb cb 89 c8 5b 5e 5f c3 89 f6 57 56 53 Sep 28 09:39:36 laptop kernel: [17182390.164000] <1>Unable to handle kernel paging request at virtual address 20eb7865 Sep 28 09:39:36 laptop kernel: [17182390.164000] printing eip: Sep 28 09:39:36 laptop kernel: [17182390.164000] 20eb7865 Sep 28 09:39:36 laptop kernel: [17182390.164000] *pde = 00000000 Sep 28 09:39:36 laptop kernel: [17182390.164000] Oops: 0000 [#2] Sep 28 09:39:36 laptop kernel: [17182390.164000] PREEMPT Sep 28 09:39:36 laptop kernel: [17182390.164000] Modules linked in: dvb_usb_umt_010 mt352 dvb_usb_dibusb_common dib3000mc dib3000_common dvb_usb dvb_core dvb_pll rfcomm l2cap bluetooth ppdev i915 drm acpi_cpufreq cpufreq_userspace cpufreq_stats freq_table cpufreq_powersave cpufreq_ondemand cpufreq_conservative video tc1100_wmi sony_acpi pcc_acpi hotkey dev_acpi container button acpi_sbs battery ac i2c_acpi_ec i2c_core ipv6 nls_iso8859_1 nls_cp437 vfat fat nls_utf8 ntfs dm_mod af_packet md_mod sr_mod sbp2 scsi_mod parport_pc lp parport pcmcia yenta_socket rsrc_nonstatic irda joydev crc_ccitt b44 mii pcmcia_core snd_intel8x0 snd_ac97_codec snd_ac97_bus snd_pcm_oss snd_mixer_oss snd_pcm snd_timer psmouse serio_raw snd soundcore snd_page_alloc rtc shpchp pci_hotplug intel_agp agpgart tsdev evdev usbhid ext3 jbd ide_generic ohci1394 ieee1394 ehci_hcd uhci_hcd usbcore ide_cd cdrom ide_disk piix generic thermal processor fan capability commoncap vga16fb vgastate fbcon tileblit font bitblit softcursor Sep 28 09:39:36 laptop kernel: [17182390.164000] CPU: 0 Sep 28 09:39:36 laptop kernel: [17182390.164000] EIP: 0060:[phys_startup_32+551254117/-1073741824] Not tainted VLI Sep 28 09:39:36 laptop kernel: [17182390.164000] EFLAGS: 00010246 (2.6.15-27-386) Sep 28 09:39:36 laptop kernel: [17182390.164000] EIP is at 0x20eb7865 Sep 28 09:39:36 laptop kernel: [17182390.164000] eax: 00000000 ebx: f0a812ff ecx: 00000001 edx: 00000000 Sep 28 09:39:36 laptop kernel: [17182390.164000] esi: f0a8130c edi: 00000282 ebp: f0a812ff esp: dfe33f58 Sep 28 09:39:36 laptop kernel: [17182390.164000] ds: 007b es: 007b ss: 0068 Sep 28 09:39:36 laptop kernel: [17182390.164000] Process kacpid (pid: 9, threadinfo=dfe32000 task=dffca550) Sep 28 09:39:36 laptop kernel: [17182390.164000] Stack: c01f7748 fede40c0 f0a81308 c012cb0a f0a812ff dfe32000 dffd14d8 dffd14c8 Sep 28 09:39:36 laptop kernel: [17182390.164000] dffd14d0 dfe32000 c01f7705 dfe32000 00000001 00000000 fcb4da00 00010000 Sep 28 09:39:36 laptop kernel: [17182390.164000] 00000000 00000000 dffca550 c0118940 00100100 00200200 ffffffff ffffffff Sep 28 09:39:36 laptop kernel: [17182390.164000] Call Trace: Sep 28 09:39:36 laptop kernel: [17182390.164000] [acpi_os_execute_deferred+67/80] acpi_os_execute_deferred+0x43/0x50 Sep 28 09:39:36 laptop kernel: [17182390.164000] [worker_thread+442/656] worker_thread+0x1ba/0x290 Sep 28 09:39:36 laptop kernel: [17182390.164000] [acpi_os_execute_deferred+0/80] acpi_os_execute_deferred+0x0/0x50 Sep 28 09:39:36 laptop kernel: [17182390.164000] [default_wake_function+0/32] default_wake_function+0x0/0x20 Sep 28 09:39:36 laptop kernel: [17182390.164000] [worker_thread+0/656] worker_thread+0x0/0x290 Sep 28 09:39:36 laptop kernel: [17182390.164000] [kthread+147/160] kthread+0x93/0xa0 Sep 28 09:39:36 laptop kernel: [17182390.164000] [kthread+0/160] kthread+0x0/0xa0 Sep 28 09:39:36 laptop kernel: [17182390.164000] [kernel_thread_helper+5/16] kernel_thread_helper+0x5/0x10 Sep 28 09:39:36 laptop kernel: [17182390.164000] Code: Bad EIP value. Sep 28 09:41:19 laptop kernel: [17182390.164000] <1>Unable to handle kernel paging request at virtual address f8e8c050 Sep 28 09:41:19 laptop kernel: [17182492.440000] printing eip: Sep 28 09:41:19 laptop kernel: [17182492.444000] f8e9c32b Sep 28 09:41:19 laptop kernel: [17182492.452000] *pde = 36dd3067 Sep 28 09:41:19 laptop kernel: [17182492.456000] Oops: 0000 [#3] Sep 28 09:41:19 laptop kernel: [17182492.456000] PREEMPT Sep 28 09:41:19 laptop kernel: [17182492.456000] Modules linked in: dvb_usb_umt_010 mt352 dvb_usb_dibusb_common dib3000mc dib3000_common dvb_usb dvb_core dvb_pll rfcomm l2cap bluetooth ppdev i915 drm acpi_cpufreq cpufreq_userspace cpufreq_stats freq_table cpufreq_powersave cpufreq_ondemand cpufreq_conservative video tc1100_wmi sony_acpi pcc_acpi hotkey dev_acpi container button acpi_sbs battery ac i2c_acpi_ec i2c_core ipv6 nls_iso8859_1 nls_cp437 vfat fat nls_utf8 ntfs dm_mod af_packet md_mod sr_mod sbp2 scsi_mod parport_pc lp parport pcmcia yenta_socket rsrc_nonstatic irda joydev crc_ccitt b44 mii pcmcia_core snd_intel8x0 snd_ac97_codec snd_ac97_bus snd_pcm_oss snd_mixer_oss snd_pcm snd_timer psmouse serio_raw snd soundcore snd_page_alloc rtc shpchp pci_hotplug intel_agp agpgart tsdev evdev usbhid ext3 jbd ide_generic ohci1394 ieee1394 ehci_hcd uhci_hcd usbcore ide_cd cdrom ide_disk piix generic thermal processor fan capability commoncap vga16fb vgastate fbcon tileblit font bitblit softcursor Sep 28 09:41:19 laptop kernel: [17182492.456000] CPU: 0 Sep 28 09:41:19 laptop kernel: [17182492.456000] EIP: 0060:[pg0+950477611/1069368320] Not tainted VLI Sep 28 09:41:19 laptop kernel: [17182492.456000] EFLAGS: 00010282 (2.6.15-27-386) Sep 28 09:41:19 laptop kernel: [17182492.456000] EIP is at dvb_demux_release+0xb/0x20 [dvb_core] Sep 28 09:41:19 laptop kernel: [17182492.456000] eax: f8e8c000 ebx: 00000008 ecx: ee7b8998 edx: ee72d900 Sep 28 09:41:19 laptop kernel: [17182492.456000] esi: ee72d900 edi: f0a638fc ebp: ee7b8998 esp: dc9b3e4c Sep 28 09:41:19 laptop kernel: [17182492.456000] ds: 007b es: 007b ss: 0068 Sep 28 09:41:19 laptop kernel: [17182492.456000] Process gxine (pid: 7831, threadinfo=dc9b2000 task=e4b2ea70) Sep 28 09:41:19 laptop kernel: [17182492.456000] Stack: c0160c97 f0a638fc f8e8c000 dfff4140 ee72d900 00000000 dfeb3040 00000000 Sep 28 09:41:19 laptop kernel: [17182492.456000] c015f34b ee72d900 dfeb3040 ee72d900 dfeb3040 00007fff 00000028 d9e3a240 Sep 28 09:41:19 laptop kernel: [17182492.456000] c011df82 ee72d900 dfeb3040 dfeb3040 00000001 dfeb3040 e4b2ea70 00000001 Sep 28 09:41:19 laptop kernel: [17182492.456000] Call Trace: Sep 28 09:41:19 laptop kernel: [17182492.456000] [__fput+119/352] __fput+0x77/0x160 Sep 28 09:41:19 laptop kernel: [17182492.456000] [filp_close+59/128] filp_close+0x3b/0x80 Sep 28 09:41:19 laptop kernel: [17182492.456000] [put_files_struct+114/192] put_files_struct+0x72/0xc0 Sep 28 09:41:19 laptop kernel: [17182492.456000] [do_exit+268/1008] do_exit+0x10c/0x3f0 Sep 28 09:41:19 laptop kernel: [17182492.456000] [do_group_exit+47/176] do_group_exit+0x2f/0xb0 Sep 28 09:41:19 laptop kernel: [17182492.456000] [get_signal_to_deliver+517/816] get_signal_to_deliver+0x205/0x330 Sep 28 09:41:19 laptop kernel: [17182492.456000] [do_signal+68/272] do_signal+0x44/0x110 Sep 28 09:41:19 laptop kernel: [17182492.456000] [do_anonymous_page+364/400] do_anonymous_page+0x16c/0x190 Sep 28 09:41:19 laptop kernel: [17182492.456000] [do_anonymous_page+127/400] do_anonymous_page+0x7f/0x190 Sep 28 09:41:19 laptop kernel: [17182492.456000] [__handle_mm_fault+407/528] __handle_mm_fault+0x197/0x210 Sep 28 09:41:19 laptop kernel: [17182492.456000] [sockfd_lookup+15/128] sockfd_lookup+0xf/0x80 Sep 28 09:41:19 laptop kernel: [17182492.456000] [sys_socketcall+192/480] sys_socketcall+0xc0/0x1e0 Sep 28 09:41:19 laptop kernel: [17182492.456000] [do_notify_resume+39/64] do_notify_resume+0x27/0x40 Sep 28 09:41:19 laptop kernel: [17182492.456000] [work_notifysig+19/37] work_notifysig+0x13/0x25 Sep 28 09:41:19 laptop kernel: [17182492.456000] Code: 31 d2 89 d0 5b c3 8d 76 00 8d bc 27 00 00 00 00 ba ea ff ff ff 89 d0 5b c3 8d b4 26 00 00 00 00 8b 44 24 08 8b 40 74 89 44 24 08 <8b> 40 50 89 44 24 04 e9 b9 f8 ff ff 89 f6 8d bc 27 00 00 00 00 Sep 28 09:41:19 laptop kernel: [17182492.456000] <1>Fixing recursive fault but reboot is needed! ** Affects: linux-source-2.6.15 (Ubuntu) Importance: Undecided Status: Unconfirmed -- kernel BUG at arch/i386/lib/usercopy.c:608! https://launchpad.net/bugs/62731 From c.mench at free.fr Thu Sep 28 07:31:42 2006 From: c.mench at free.fr (sgifan67) Date: Thu, 28 Sep 2006 07:31:42 -0000 Subject: [Bug 57502] Re: JMicron PATA/SATA Controller does not work References: <20060823192235.13463.13121.malonedeb@gandwana.ubuntu.com> Message-ID: <20060928073142.3619.21321.malone@gandwana.ubuntu.com> I tested the 27/09 daily build. I have a P5B and the CD and Harddrive are both on the IDE channel drived by the JMicron The CD is now correctly detected, the harddrive also, the files are copied on the harddrive, all is OK until the installation finishes and the PC reboot. but then GRUB starts and display an Error 21... So i think grub has problem booting my HD connected to JMicron IDE connection. GRUB should be also on the list of trouble maker... all i now is that with MANDRIVA 2007.0 RC2, the LILO bootloader boots with the exact same configuration. -- JMicron PATA/SATA Controller does not work https://launchpad.net/bugs/57502 From neuromancer at tgwifi.org Thu Sep 28 09:06:06 2006 From: neuromancer at tgwifi.org (neuromancer) Date: Thu, 28 Sep 2006 09:06:06 -0000 Subject: [Bug 62746] Raid 5 problem with 2.6.15-27 References: <20060928090606.3619.83161.malonedeb@gandwana.ubuntu.com> Message-ID: <20060928090606.3619.83161.malonedeb@gandwana.ubuntu.com> Public bug reported: Binary package hint: linux-image-2.6-k7 After upgrade to 2.6.15-27 I'ving a problem with Raid 5. This is continuosly, and the error is: "[17593006.932000] scheduling while atomic: md2_raid5/0xffffffff/2423 [17593006.932000] [] schedule+0x99d/0xd20 [17593006.932000] [] __wake_up+0x40/0x60 [17593006.932000] [] release_stripe+0xc0/0x190 [raid5] [17593006.932000] [] schedule_timeout+0x75/0xc0 [17593006.932000] [] raid5d+0x242/0x2f0 [raid5] [17593006.932000] [] prepare_to_wait+0x20/0x70 [17593006.932000] [] md_thread+0xf9/0x150 [md_mod] [17593006.932000] [] autoremove_wake_function+0x0/0x60 [17593006.932000] [] md_thread+0x0/0x150 [md_mod] [17593006.932000] [] kthread+0xc7/0xd0 [17593006.932000] [] kthread+0x0/0xd0 [17593006.932000] [] kernel_thread_helper+0x5/0xc" Every I/O access to the raid outputs and error like this (in 12 hours the /var/log/kern.log is 2GB in size) and I've to stop syslod and klogd. Not data corruption (at the moment) but I'm scared about. Interesting data: AMD Athlon Xp 2400+ 1.5GB DDR 3 HD 200GB (1 IDE 2 SATA) 3 Raid 5 - /dev/md0 40GB Raid 5 xfs / - /dev/md1 140GB Raid 5 xfs /home - /dev/md2 205GB Raid 5 xfs Ubuntu 6.06 LTS (with the lastest updates) Kernel 2.6.15-27 (the lastest) The only Raid that output this error is /dev/md2 (curious at lest). Best regards, neuromancer ** Affects: linux-meta (Ubuntu) Importance: Undecided Status: Unconfirmed -- Raid 5 problem with 2.6.15-27 https://launchpad.net/bugs/62746 From Corneliussen at gmail.com Thu Sep 28 09:57:10 2006 From: Corneliussen at gmail.com (Andcor) Date: Thu, 28 Sep 2006 09:57:10 -0000 Subject: [Bug 57502] Re: JMicron PATA/SATA Controller does not work References: <20060823192235.13463.13121.malonedeb@gandwana.ubuntu.com> Message-ID: <20060928095710.3619.47724.malone@gandwana.ubuntu.com> Can't you get it to boot if you connect your harddrive to one of the ICH8 sata controllers ? -- JMicron PATA/SATA Controller does not work https://launchpad.net/bugs/57502 From slazz at arcor.de Thu Sep 28 10:54:53 2006 From: slazz at arcor.de (slazZ) Date: Thu, 28 Sep 2006 10:54:53 -0000 Subject: [Bug 36014] Re: kernel can't scale cpu frequency References: <20060322140248.30471.37870.malonedeb@gangotri.ubuntu.com> Message-ID: <20060928105453.2244.34202.malone@gangotri.ubuntu.com> Can confirm this bug for my Thinkpad R60 dual core. None of the workarrounds here can fix this annoying problem :( Even with an edgy daily build both core doesnt scale. -- kernel can't scale cpu frequency https://launchpad.net/bugs/36014 From tusi at mora.u-szeged.hu Thu Sep 28 12:09:16 2006 From: tusi at mora.u-szeged.hu (mirage) Date: Thu, 28 Sep 2006 12:09:16 -0000 Subject: [Bug 39315] Re: Keyboard random repeat and dropped key presses References: <20060412160910.15436.50293.malonedeb@gangotri.ubuntu.com> Message-ID: <20060928120916.2244.519.malone@gangotri.ubuntu.com> On the IBM Bios Update site i've found the changelog regarding this issue: Version 1YET62WW (1.27) Note: This BIOS version will only work with Embedded Controller Program Version 1.06 (or higher). * Previously released BIOS version 1YET60WW, 1YET61WW and Embedded Controller 1.05 combination may cause a spontaneous wrong key input when you key input with an external PS/2 type keyboard. * Numeric characters (2, 4, 6 and 8) will be inserted internittently during cursor move with cursor keys. * A keyboard behaves as if shift key depressed until a shift key is pressed. * You can only type only Uppercase characters. (Some keys seem to keystrokes, because the shift cases are not defined) * Multiple selection with cursor keys * Numeric keypad will turn to cursor keys If you encounter these cases, please update the Embedded Controller to 1.06 (1YHT29WW). So I suggest to all a BIOS-update, where it's possible. It seems that the problem is solved by me now... -- Keyboard random repeat and dropped key presses https://launchpad.net/bugs/39315 From fx at gnu.org Thu Sep 28 12:29:49 2006 From: fx at gnu.org (Dave Love) Date: Thu, 28 Sep 2006 12:29:49 -0000 Subject: [Bug 40119] Re: SPARC boot failed: Illegal Instruction References: <20060419084429.8468.45532.malonedeb@gandwana.ubuntu.com> Message-ID: <20060928122949.2315.94238.malone@gangotri.ubuntu.com> For info: I see the illegal instruction error at the initrd load from an attempt to install from cdrom on an Ultra5 270MHz with OBP 3.11 and 128MB in 4 slots. I'll upgrade OBP and report results. (This is the 6.06.1 iso.) -- SPARC boot failed: Illegal Instruction https://launchpad.net/bugs/40119 From cornelis at p-c-software.de Thu Sep 28 13:42:40 2006 From: cornelis at p-c-software.de (Patrick Cornelissen) Date: Thu, 28 Sep 2006 13:42:40 -0000 Subject: [Bug 47241] Re: freezes on boot References: <20060529075557.21895.60622.malonedeb@gandwana.ubuntu.com> Message-ID: <20060928134240.2244.58644.malone@gangotri.ubuntu.com> I finally found the reason the the freeze! The kernel stops after he initialized the USB devices. I have disabled USB in the bios and the edgy Installer is finally working. Are there any USB patches in the installer kernel that may cause this behaviour? I never had problems with other kernels before. -- freezes on boot https://launchpad.net/bugs/47241 From gmolleda at us.es Thu Sep 28 12:10:36 2006 From: gmolleda at us.es (Guillermo Molleda) Date: Thu, 28 Sep 2006 12:10:36 -0000 Subject: [Bug 48556] Re: ACPI-0517: ****Error Method parse/execudion failed References: <20060605175228.5989.15658.malonedeb@gangotri.ubuntu.com> Message-ID: <20060928121036.2315.66143.malone@gangotri.ubuntu.com> Perfect, I'm writing 10 minutes later without acpi=off in the grub. But I have the steps: * change to edgy repositories * sudo nano /etc/apt/sources.list * change dapper to edgy in the file * sudo apt-get update Ok, is the same. use Synaptic to upgrade or install the next: linux-386 (is version 2.6.17-9) linux-image-2.6.17-10-386 (yes, is -10 and for 386, my synaptic say that the 686 is obsolete and only upgrade no install) linux-restricted-modules-2.6.17-10-386, this install too the linux-restricted-modules-common I install all, and now edit the /boot/grub/menu.lst: sudo nano /boot/grub/menu.lst and view that the kernel 2.6.17 have NOT the acpi=off option, and the kernel old YES have acpi=off (you can run the old kernel if all fail) Now reboot and: * Change sources.list back to Dapper * sudo apt-get update Perfect, I have installed GkrellM and I view the battery state perfectly (before without acpi was impossible detect the battery level, in a laptop that is very important) Thanks you. -- ACPI-0517: ****Error Method parse/execudion failed https://launchpad.net/bugs/48556 From joe at estara.com Thu Sep 28 14:55:32 2006 From: joe at estara.com (Joe eStara) Date: Thu, 28 Sep 2006 14:55:32 -0000 Subject: [Bug 55138] Re: Dell 2950 w/ PERC 5i/Integrated, seeing RAID'd HDD's References: <20060804030427.9092.4602.malonedeb@gangotri.ubuntu.com> Message-ID: <20060928145532.2315.58274.malone@gangotri.ubuntu.com> This is far worse than simply not seeing the devices: When all the devices are seen, writes are only sent to one hard drive effectively making your raid worthless. This is fixed in FC5 by using the latest megaraid drivers 2.0.4 (?) This is keeping me using ubuntu on 35 severs, and will keep every buyer of dell 1950's and 2950's from using ubuntu so it's very harmful and critical. Joe -- Dell 2950 w/ PERC 5i/Integrated, seeing RAID'd HDD's https://launchpad.net/bugs/55138 From myriamg at gmail.com Thu Sep 28 15:22:08 2006 From: myriamg at gmail.com (Myrgen) Date: Thu, 28 Sep 2006 15:22:08 -0000 Subject: [Bug 59078] Re: VIA 8235 embedded card not working: freezing desktop in Dapper References: <20060905194936.3977.27669.malonedeb@gandwana.ubuntu.com> Message-ID: <20060928152209.3663.27508.malone@gandwana.ubuntu.com> I haven't tried Edgy yet, and frankly, as I need to work, hence to have a computer in working order, I am not too keen to try and install it. However, if it would help resolve this issue, I could try and download Edgy, install it over the week end, try, report here, then go back to Breezy (which is working great for me!). -- VIA 8235 embedded card not working: freezing desktop in Dapper https://launchpad.net/bugs/59078 From zoolonly at gmail.com Thu Sep 28 15:48:44 2006 From: zoolonly at gmail.com (zoolonly) Date: Thu, 28 Sep 2006 15:48:44 -0000 Subject: [Bug 57502] Re: JMicron PATA/SATA Controller does not work References: <20060823192235.13463.13121.malonedeb@gandwana.ubuntu.com> Message-ID: <20060928154845.3619.23929.malone@gandwana.ubuntu.com> I just tryed today's daily build and the JMicron Controller is Working with HDD and DVD drives !! But the installer could not detect SATA drive that are detected with Ubuntu 6.06 .... -- JMicron PATA/SATA Controller does not work https://launchpad.net/bugs/57502 From baziliz at gmail.com Thu Sep 28 16:03:22 2006 From: baziliz at gmail.com (HetaUma) Date: Thu, 28 Sep 2006 16:03:22 -0000 Subject: [Bug 57502] Re: JMicron PATA/SATA Controller does not work References: <20060823192235.13463.13121.malonedeb@gandwana.ubuntu.com> Message-ID: <20060928160322.3619.78207.malone@gandwana.ubuntu.com> >From what I've noticed, installer can detect both IDE and SATA drives only if they are connected to the same controller (JMicorn) and not IDE to Jmincron andd SATA to intel one. For those who have the gigabyte ga-965p-ds3 the sata ports on the JMicron controller are the purple ones. -- JMicron PATA/SATA Controller does not work https://launchpad.net/bugs/57502 From zoolonly at gmail.com Thu Sep 28 16:19:20 2006 From: zoolonly at gmail.com (zoolonly) Date: Thu, 28 Sep 2006 16:19:20 -0000 Subject: [Bug 57502] Re: JMicron PATA/SATA Controller does not work References: <20060823192235.13463.13121.malonedeb@gandwana.ubuntu.com> Message-ID: <20060928161920.3663.12874.malone@gandwana.ubuntu.com> Ok sata drives are detected on JMicron only ! It's a shame i've got only one SATA plug (JMicron) and 4 Intel !!! But i m not anymore on WINDOWS !!!! ;-)) -- JMicron PATA/SATA Controller does not work https://launchpad.net/bugs/57502 From hostmaster at grawert.net Thu Sep 28 16:22:16 2006 From: hostmaster at grawert.net (Oliver Grawert) Date: Thu, 28 Sep 2006 16:22:16 -0000 Subject: [Bug 62817] linux-image-amd64-generic transitional package not on the CDs References: <20060928162217.2315.43130.malonedeb@gangotri.ubuntu.com> Message-ID: <20060928162217.2315.43130.malonedeb@gangotri.ubuntu.com> Public bug reported: the linux image package for amd64 was renamed to linux-image-generic, in dapper it was called linux-image-amd64-generic, a transitional package exists but is not included on the CDs, we should include this package to make sure upgrades for CD-only users work properly. ** Affects: linux-meta (Ubuntu) Importance: High Status: Unconfirmed ** Changed in: linux-meta (Ubuntu) Importance: Undecided => High Target: None => ubuntu-6.10 -- linux-image-amd64-generic transitional package not on the CDs https://launchpad.net/bugs/62817 From victor.petrov at gmail.com Thu Sep 28 16:28:38 2006 From: victor.petrov at gmail.com (Victor Petrov) Date: Thu, 28 Sep 2006 16:28:38 -0000 Subject: [Bug 57502] Re: JMicron PATA/SATA Controller does not work References: <20060823192235.13463.13121.malonedeb@gandwana.ubuntu.com> <20060928161920.3663.12874.malone@gandwana.ubuntu.com> Message-ID: Aren't the SATA ports on JMicron controller supposed to handle external SATA drives? Why mix things up if the ICH8R has 6 SATA ports.. (on my ASUS P5B board). I have 2 DVD ROMs connected to the JMicron, the rest of my drives are connected to the ICH8R controller. I'll download the image today and see if it works correctly. Victor -- JMicron PATA/SATA Controller does not work https://launchpad.net/bugs/57502 From mjg59 at codon.org.uk Thu Sep 28 16:39:53 2006 From: mjg59 at codon.org.uk (Matthew Garrett) Date: Thu, 28 Sep 2006 16:39:53 -0000 Subject: [Bug 57502] Re: JMicron PATA/SATA Controller does not work References: <20060823192235.13463.13121.malonedeb@gandwana.ubuntu.com> <20060928161920.3663.12874.malone@gandwana.ubuntu.com> Message-ID: <20060928163953.GB16994@srcf.ucam.org> Because we appear to have a regression in ICH8 support that hasn't been fixed in time for beta. -- JMicron PATA/SATA Controller does not work https://launchpad.net/bugs/57502 From mdz at ubuntu.com Thu Sep 28 17:34:11 2006 From: mdz at ubuntu.com (Matt Zimmerman) Date: Thu, 28 Sep 2006 17:34:11 -0000 Subject: [Bug 62817] Re: linux-image-amd64-generic transitional package not on the CDs References: <20060928162217.2315.43130.malonedeb@gangotri.ubuntu.com> Message-ID: <20060928173411.2244.50390.malone@gangotri.ubuntu.com> The solution is as simple as adding this package to the ship seed. I've done so. ** Changed in: linux-meta (Ubuntu) Status: Unconfirmed => Fix Released -- linux-image-amd64-generic transitional package not on the CDs https://launchpad.net/bugs/62817 From johannes.schmidt at physik.uni-muenchen.de Thu Sep 28 17:42:41 2006 From: johannes.schmidt at physik.uni-muenchen.de (Johannes Schmidt) Date: Thu, 28 Sep 2006 17:42:41 -0000 Subject: [Bug 22148] Re: MSI Neo4 FI hangs without acpi=off References: <20060113141642.21012.13502.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060928174241.2315.93295.malone@gangotri.ubuntu.com> Same problem here. Ubuntu boots only with acpi=off. I have a Samsung X60 T2300 Chane. http://www.samsungpc.com/products/x60/x60.htm I've been trying to use ACPI since Dapper Flight ?, using every kernel since then. Currently, I am using edgy knot 3, kernel 2.6.17-7 / -10. I have recompiled the DSDT: no warnings, no errors. -- MSI Neo4 FI hangs without acpi=off https://launchpad.net/bugs/22148 From havardda-dev at orakel.ntnu.no Thu Sep 28 19:45:51 2006 From: havardda-dev at orakel.ntnu.no (havarddahle) Date: Thu, 28 Sep 2006 19:45:51 -0000 Subject: [Bug 62501] Re: kernel ships with borked rt2400 wireless driver References: <20060926194758.10355.85078.malonedeb@gandwana.ubuntu.com> Message-ID: <20060928194551.3663.27795.malone@gandwana.ubuntu.com> Good news. I booted Orgy knot 3 and to my surprise the shipped rt2400.ko version worked. It's in fact not BETA3, but an earlier checkout, I guess. Great stuff. You may close this bug. (I did not think to try the -k7 kernel, but I expect the drivers to be the same version on all kernel flavors.) modinfo: filename: /lib/modules/2.6.17-7-generic/kernel/drivers/net/wireless/rt2x00-legacy/rt2400/rt2400.ko author: http://rt2400.sourceforge.net description: Ralink RT2400 802.11b WLAN driver 1.2.2 - CVS 2005/07/11 license: GPL vermagic: 2.6.17-7-generic SMP mod_unload 586 REGPARM gcc-4.1 depends: alias: pci:v00001814d00000101sv*sd*bc*sc*i* srcversion: 5D9C3B65B23C1688535CC24 parm: ifname:Network device name (default ra%d) (charp) parm: debug:Enable level: accepted values: 1 to switch debug on, 0 to switch debug off. (int) -- kernel ships with borked rt2400 wireless driver https://launchpad.net/bugs/62501 From anders.ostling at neurope.ikea.com Thu Sep 28 20:34:23 2006 From: anders.ostling at neurope.ikea.com (=?utf-8?q?Anders_=C3=96stling?=) Date: Thu, 28 Sep 2006 20:34:23 -0000 Subject: [Bug 22267] ACPI suspend resume problem References: <20060113141720.21012.77351.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060928203423.2315.73599.launchpad@canonical@gangotri.ubuntu.com> Public bug reported: Compaq Presario X1000 laptop Kubuntu 5.10 Hibernate/Resume works just fine, network and usb. Mousepad is ok, but bluetooth does not resume. Suspend by closing the lid works fine. Machine resumes ok, network and X works. Mousepad behaves very erratic after resuming. More or less unusable. Restarting X (c-a-b) does not help. A full reboot is the only thing that restores prober mouse behaviour. Suspend by choosing Suspend from the power applet works. Pressing power button to resume machine works also, BUT approx 3 seconds after resume seems to be complete, the machine does a full shutdown! Keep up the good work, and let me know if there is anything you want me to try/verify/experment with. Anders ** Affects: linux-source-2.6.12 (Ubuntu) Importance: Medium Assignee: Jonathan Riddell Status: Unconfirmed -- ACPI suspend resume problem https://launchpad.net/bugs/22267 From gorkang at gmail.com Thu Sep 28 20:35:05 2006 From: gorkang at gmail.com (emrys) Date: Thu, 28 Sep 2006 20:35:05 -0000 Subject: [Bug 22292] Resume from suspend-to-RAM failing on ACER 1502 References: <20060113141731.21012.56801.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060928203505.3663.73028.launchpad@canonical@gandwana.ubuntu.com> Public bug reported: With the new kernel 2.6.12-9, hibernation works but suspension is not working properly. It suspends, and while restarting the only thing I can see is a grey screen. I'm using an ACER 1502 (AMD 3200) with 1Gig RAM ** Affects: linux-source-2.6.12 (Ubuntu) Importance: Medium Status: Unconfirmed -- Resume from suspend-to-RAM failing on ACER 1502 https://launchpad.net/bugs/22292 From pandisv at yahoo.co.uk Thu Sep 28 20:35:04 2006 From: pandisv at yahoo.co.uk (Vassilis Pandis) Date: Thu, 28 Sep 2006 20:35:04 -0000 Subject: [Bug 22292] Re: Resume from suspend-to-RAM failing on ACER 1502 References: <20060113141731.21012.56801.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060928203505.3663.67448.launchpad@gandwana.ubuntu.com> ** Changed in: Ubuntu Sourcepackagename: None => linux-source-2.6.12 -- Resume from suspend-to-RAM failing on ACER 1502 https://launchpad.net/bugs/22292 From tas50 at humboldt.edu Thu Sep 28 21:39:03 2006 From: tas50 at humboldt.edu (Timothy Smith) Date: Thu, 28 Sep 2006 21:39:03 -0000 Subject: [Bug 58020] Re: VIA audio on Sharp PC-AV18 incorrectly loads VIA DXS References: <20060828173021.17097.42638.malonedeb@gangotri.ubuntu.com> Message-ID: <20060928213903.2244.30240.malone@gangotri.ubuntu.com> Problem has been fixed in latest releases ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Needs Info => Fix Committed -- VIA audio on Sharp PC-AV18 incorrectly loads VIA DXS https://launchpad.net/bugs/58020 From neuromancer at tgwifi.org Thu Sep 28 22:49:16 2006 From: neuromancer at tgwifi.org (neuromancer) Date: Thu, 28 Sep 2006 22:49:16 -0000 Subject: [Bug 62746] Re: Kernel problem 2.6.15-2? References: <20060928090606.3619.83161.malonedeb@gandwana.ubuntu.com> Message-ID: <20060928224916.3663.59410.launchpad@gandwana.ubuntu.com> ** Summary changed: - Raid 5 problem with 2.6.15-27 + Kernel problem 2.6.15-2? ** Description changed: Binary package hint: linux-image-2.6-k7 After upgrade to 2.6.15-27 I'ving a problem with Raid 5. This is continuosly, and the error is: "[17593006.932000] scheduling while atomic: md2_raid5/0xffffffff/2423 [17593006.932000] [] schedule+0x99d/0xd20 [17593006.932000] [] __wake_up+0x40/0x60 [17593006.932000] [] release_stripe+0xc0/0x190 [raid5] [17593006.932000] [] schedule_timeout+0x75/0xc0 [17593006.932000] [] raid5d+0x242/0x2f0 [raid5] [17593006.932000] [] prepare_to_wait+0x20/0x70 [17593006.932000] [] md_thread+0xf9/0x150 [md_mod] [17593006.932000] [] autoremove_wake_function+0x0/0x60 [17593006.932000] [] md_thread+0x0/0x150 [md_mod] [17593006.932000] [] kthread+0xc7/0xd0 [17593006.932000] [] kthread+0x0/0xd0 [17593006.932000] [] kernel_thread_helper+0x5/0xc" Every I/O access to the raid outputs and error like this (in 12 hours the /var/log/kern.log is 2GB in size) and I've to stop syslod and klogd. Not data corruption (at the moment) but I'm scared about. - Interesting data: - AMD Athlon Xp 2400+ - 1.5GB DDR - 3 HD 200GB (1 IDE 2 SATA) - 3 Raid 5 - - /dev/md0 40GB Raid 5 xfs / - - /dev/md1 140GB Raid 5 xfs /home - - /dev/md2 205GB Raid 5 xfs - Ubuntu 6.06 LTS (with the lastest updates) - Kernel 2.6.15-27 (the lastest) - The only Raid that output this error is /dev/md2 (curious at lest). + After reboot the machine the raid is ok, but now a java process outputs + and similar error, related with scheduling and futexes: + + [17203784.544000] scheduling while atomic: java/0xffffffff/6795 + [17203784.544000] [] schedule+0x99d/0xd20 + [17203784.544000] [] ip_local_deliver_finish+0x0/0x280 + [17203784.544000] [] lock_timer_base+0x24/0x50 + [17203784.544000] [] __mod_timer+0x97/0xc0 + [17203784.544000] [] schedule_timeout+0x4c/0xc0 + [17203784.544000] [] process_timeout+0x0/0x10 + [17203784.544000] [] futex_wait+0x1ea/0x220 + [17203784.544000] [] default_wake_function+0x0/0x20 + [17203784.544000] [] do_futex+0x74/0xc0 + [17203784.544000] [] sys_futex+0x66/0x130 + [17203784.544000] [] sysenter_past_esp+0x54/0x75 + + Not related with one process in particular, otherwise the sheduling algorithm that schedules to other process when executin a function or code that needs to be atomic (executed at once). + The problem is also with kernel version 2.6.15-26. + + Could be hardware related? (mem, i/o controllers...) Best regards, neuromancer -- Kernel problem 2.6.15-2? https://launchpad.net/bugs/62746 From Corneliussen at gmail.com Thu Sep 28 11:55:58 2006 From: Corneliussen at gmail.com (Andcor) Date: Thu, 28 Sep 2006 11:55:58 -0000 Subject: [Bug 57502] Re: JMicron PATA/SATA Controller does not work References: <20060823192235.13463.13121.malonedeb@gandwana.ubuntu.com> <20060928101803.2244.2847.malone@gangotri.ubuntu.com> Message-ID: <84b3be350609280455g27dd8d0ft4a210f3e4f32df32@mail.gmail.com> Aah sorry, did not see that -- JMicron PATA/SATA Controller does not work https://launchpad.net/bugs/57502 From c.mench at free.fr Thu Sep 28 10:18:03 2006 From: c.mench at free.fr (sgifan67) Date: Thu, 28 Sep 2006 10:18:03 -0000 Subject: [Bug 57502] Re: JMicron PATA/SATA Controller does not work References: <20060823192235.13463.13121.malonedeb@gandwana.ubuntu.com> Message-ID: <20060928101803.2244.2847.malone@gangotri.ubuntu.com> as I said i have an IDE harddrive not a SATA one -- JMicron PATA/SATA Controller does not work https://launchpad.net/bugs/57502 From bugwatch at bugs.launchpad.net Wed Sep 27 07:31:43 2006 From: bugwatch at bugs.launchpad.net (Bug Watch Updater) Date: Wed, 27 Sep 2006 07:31:43 -0000 Subject: [Bug 11370] Re: incompatability with modules from -2 version of same package References: <20060113131940.21012.71152.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060927073202.16251.55696.launchpad@gangotri.ubuntu.com> *** This bug is a duplicate of bug 11368 *** ** Changed in: linux-source-2.6.15 (Debian) Status: Unknown => Fix Released -- incompatability with modules from -2 version of same package https://launchpad.net/bugs/11370 From bugwatch at bugs.launchpad.net Wed Sep 27 07:31:43 2006 From: bugwatch at bugs.launchpad.net (Bug Watch Updater) Date: Wed, 27 Sep 2006 07:31:43 -0000 Subject: [Bug 11372] Re: Alsa modules no longer load after minor kernel update References: <20060113131942.21012.55111.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060927073453.16251.59875.launchpad@gangotri.ubuntu.com> *** This bug is a duplicate of bug 11368 *** ** Changed in: linux-source-2.6.15 (Debian) Status: Unknown => Fix Released -- Alsa modules no longer load after minor kernel update https://launchpad.net/bugs/11372 From bugwatch at bugs.launchpad.net Wed Sep 27 07:31:43 2006 From: bugwatch at bugs.launchpad.net (Bug Watch Updater) Date: Wed, 27 Sep 2006 07:31:43 -0000 Subject: [Bug 11371] Re: kernel-image-2.4.27-1-k7: broken i2c modules References: <20060113131941.21012.51860.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060927073249.16251.4104.launchpad@gangotri.ubuntu.com> *** This bug is a duplicate of bug 11368 *** ** Changed in: linux-source-2.6.15 (Debian) Status: Unknown => Fix Released -- kernel-image-2.4.27-1-k7: broken i2c modules https://launchpad.net/bugs/11371 From bugwatch at bugs.launchpad.net Wed Sep 27 07:31:43 2006 From: bugwatch at bugs.launchpad.net (Bug Watch Updater) Date: Wed, 27 Sep 2006 07:31:43 -0000 Subject: [Bug 10783] Re: Kernel-image-2.6.9 update removes /initrd.img References: <20060113131642.21012.79992.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060927073506.16251.568.launchpad@gangotri.ubuntu.com> *** This bug is a duplicate of bug 10641 *** ** Changed in: Debian Status: Unknown => Fix Released -- Kernel-image-2.6.9 update removes /initrd.img https://launchpad.net/bugs/10783 From bugwatch at bugs.launchpad.net Wed Sep 27 07:31:43 2006 From: bugwatch at bugs.launchpad.net (Bug Watch Updater) Date: Wed, 27 Sep 2006 07:31:43 -0000 Subject: [Bug 11457] Re: depmod: *** Unresolved symbols References: <20060113132009.21012.21631.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060927073207.16251.31120.launchpad@gangotri.ubuntu.com> *** This bug is a duplicate of bug 11368 *** ** Changed in: linux-source-2.6.15 (Debian) Status: Unknown => Fix Released -- depmod: *** Unresolved symbols https://launchpad.net/bugs/11457 From bugwatch at bugs.launchpad.net Wed Sep 27 07:31:43 2006 From: bugwatch at bugs.launchpad.net (Bug Watch Updater) Date: Wed, 27 Sep 2006 07:31:43 -0000 Subject: [Bug 11369] Re: debian-installer: [netboot-x86] there is a module versioning issue in 2.6 and 2.4 netboot images. References: <20060113131940.21012.45652.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060927073433.16251.33509.launchpad@gangotri.ubuntu.com> *** This bug is a duplicate of bug 11368 *** ** Changed in: linux-source-2.6.15 (Debian) Status: Unknown => Fix Released -- debian-installer: [netboot-x86] there is a module versioning issue in 2.6 and 2.4 netboot images. https://launchpad.net/bugs/11369 From bugwatch at bugs.launchpad.net Wed Sep 27 07:31:43 2006 From: bugwatch at bugs.launchpad.net (Bug Watch Updater) Date: Wed, 27 Sep 2006 07:31:43 -0000 Subject: [Bug 11373] Re: failed loading alsa driver References: <20060113131943.21012.28885.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060927073359.16251.60473.launchpad@gangotri.ubuntu.com> *** This bug is a duplicate of bug 11368 *** ** Changed in: linux-source-2.6.15 (Debian) Status: Unknown => Fix Released -- failed loading alsa driver https://launchpad.net/bugs/11373 From bugwatch at bugs.launchpad.net Wed Sep 27 07:31:43 2006 From: bugwatch at bugs.launchpad.net (Bug Watch Updater) Date: Wed, 27 Sep 2006 07:31:43 -0000 Subject: [Bug 11692] Re: ndiswrapper should be in contrib References: <20060113132131.21012.13715.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060927073612.16251.21863.launchpad@gangotri.ubuntu.com> ** Changed in: ndiswrapper (Debian) Status: Unknown => Fix Released -- ndiswrapper should be in contrib https://launchpad.net/bugs/11692 From jwbaker at acm.org Fri Sep 29 00:57:30 2006 From: jwbaker at acm.org (jwb) Date: Fri, 29 Sep 2006 00:57:30 -0000 Subject: [Bug 35004] Re: USB devices are not shown in /procu/bus/usb/ causing VMWare to fail to see them References: <20060315085103.30082.81158.malonedeb@gandwana.ubuntu.com> Message-ID: <20060929005730.3619.73107.malone@gandwana.ubuntu.com> This problem still exists in VMWare Workstation 5.5.2. VMWare expects usbfs to be mounted somewhere, although the mountpoint is configurable. And really, why shouldn't they expect it to be mounted? I spent a good hour trying to figure this one out and when I found that usbfs wasn't mounted I was pretty surprised. It's like not having /proc. -- USB devices are not shown in /procu/bus/usb/ causing VMWare to fail to see them https://launchpad.net/bugs/35004 From bugwatch at bugs.launchpad.net Wed Sep 27 07:31:43 2006 From: bugwatch at bugs.launchpad.net (Bug Watch Updater) Date: Wed, 27 Sep 2006 07:31:43 -0000 Subject: [Bug 11374] Re: alsa-modules-2.4.27-1-k7: Unresolved symbols References: <20060113131943.21012.79605.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060927073249.16251.95757.launchpad@gangotri.ubuntu.com> *** This bug is a duplicate of bug 11368 *** ** Changed in: linux-source-2.6.15 (Debian) Status: Unknown => Fix Released -- alsa-modules-2.4.27-1-k7: Unresolved symbols https://launchpad.net/bugs/11374 From bugwatch at bugs.launchpad.net Wed Sep 27 07:31:43 2006 From: bugwatch at bugs.launchpad.net (Bug Watch Updater) Date: Wed, 27 Sep 2006 07:31:43 -0000 Subject: [Bug 8352] Re: powerpc kernel throws SIGILL sometimes References: <20060113130315.21012.34771.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060927073410.16251.69933.launchpad@gangotri.ubuntu.com> ** Changed in: linux-source-2.6.15 (Debian) Status: Unknown => Fix Released -- powerpc kernel throws SIGILL sometimes https://launchpad.net/bugs/8352 From david at ngowiki.net Fri Sep 29 03:18:00 2006 From: david at ngowiki.net (David Tremblay) Date: Fri, 29 Sep 2006 03:18:00 -0000 Subject: [Bug 56376] Re: [Dapper 6.06] Laptop - PCI cannot allocate resource for region 7 8 and 9 References: <20060814205122.20172.54370.malonedeb@gandwana.ubuntu.com> Message-ID: <20060929031800.3619.41458.malone@gandwana.ubuntu.com> I also do have the same issue with the same error message in dmesg. I have an Acer Aspire 5572 with the 2.6.15-27-686 kernel So far the only problem I have with this laptop is the sound where I cannot control volume through gnome but through each application (annoying but not a problem) and speakers volume will not cut if plug my headphone (more annoying) included here my lspci ** Attachment added: "lspci output" http://librarian.launchpad.net/4540921/lspci_vvn.txt -- [Dapper 6.06] Laptop - PCI cannot allocate resource for region 7 8 and 9 https://launchpad.net/bugs/56376 From karvinen+launchpad at iki.fi Fri Sep 29 04:02:03 2006 From: karvinen+launchpad at iki.fi (Tero Karvinen) Date: Fri, 29 Sep 2006 04:02:03 -0000 Subject: [Bug 33372] Re: Cannot wake up from suspend and hibernate References: <20060302085058.17498.86100.malonedeb@gangotri.ubuntu.com> Message-ID: <20060929040203.2315.5269.malone@gangotri.ubuntu.com> Jan_k: does my fix work on your Acer Travelmate 3020? I think it should work, as the hardware is very similar. The fix: http://myy.helia.fi/~karte/acer_travelmate_3004wtmi_with_linux.html -- Cannot wake up from suspend and hibernate https://launchpad.net/bugs/33372 From ubuntu at thecadets.com Fri Sep 29 05:25:50 2006 From: ubuntu at thecadets.com (CadetD) Date: Fri, 29 Sep 2006 05:25:50 -0000 Subject: [Bug 62819] make-kpkg package changes SATA partitions in menu.lst References: <20060928170247.3663.80276.malonedeb@gandwana.ubuntu.com> Message-ID: <20060929052550.2244.10517.launchpad@canonical@gangotri.ubuntu.com> Public bug reported: After builidng a custom kernel from source using make-kpkg, my menu.lst entries were all changed to point to a non-existing partition. I corrected them and booted, but none of the SATA drives are recognized. AMD64 VIA Dapper 6.06 ** Affects: kernel-package (Ubuntu) Importance: Undecided Status: Unconfirmed -- make-kpkg package changes SATA partitions in menu.lst https://launchpad.net/bugs/62819 From towsonu2003 at gmail.com Fri Sep 29 05:25:50 2006 From: towsonu2003 at gmail.com (towsonu2003) Date: Fri, 29 Sep 2006 05:25:50 -0000 Subject: [Bug 62819] Re: make-kpkg package changes SATA partitions in menu.lst References: <20060928170247.3663.80276.malonedeb@gandwana.ubuntu.com> Message-ID: <20060929052550.2244.72915.launchpad@gangotri.ubuntu.com> ** Changed in: Ubuntu Sourcepackagename: None => kernel-package -- make-kpkg package changes SATA partitions in menu.lst https://launchpad.net/bugs/62819 From ubuntu at laurenssimonis.com Fri Sep 29 05:59:30 2006 From: ubuntu at laurenssimonis.com (Laurens Simonis) Date: Fri, 29 Sep 2006 05:59:30 -0000 Subject: [Bug 36596] Re: system freeze after clicking task manager trash icon in "pan" newsreader References: <20060325145711.6279.38615.malonedeb@gandwana.ubuntu.com> Message-ID: <20060929055930.2244.41116.malone@gangotri.ubuntu.com> This bug might be related to #30447, which also deals with crashing ati's on ubuntu. After some investigation primarily done by Paul, my crashes (and possilby others, too) might be due to the fact that I load the 'fglrx' driver. I include here some files which might be of interest. ** Attachment added: "Logs of laurens S" http://librarian.launchpad.net/4541112/failure.tgz -- system freeze after clicking task manager trash icon in "pan" newsreader https://launchpad.net/bugs/36596 From launchpad at ebel.mybox.org Fri Sep 29 08:49:55 2006 From: launchpad at ebel.mybox.org (Joel Ebel) Date: Fri, 29 Sep 2006 08:49:55 -0000 Subject: [Bug 57502] Re: JMicron PATA/SATA Controller does not work References: <20060823192235.13463.13121.malonedeb@gandwana.ubuntu.com> Message-ID: <20060929084955.3663.28427.malone@gandwana.ubuntu.com> Hmm. I just tried to install the 6.10 beta on my Asus P5B-VM, and I still have errors with the Jmicron. PCI: JMB36x: Enabling dual function on 0000:03:00.0 And then 4 of: Cannot allocate resource region {0..4} of device 0000:03:00.0 then an Error while updating region 0000:03:00.0/0 and lots of 0's If the beta was supposed to work, then I think this needs another look. -- JMicron PATA/SATA Controller does not work https://launchpad.net/bugs/57502 From burner at suppressingfire.org Fri Sep 29 09:38:08 2006 From: burner at suppressingfire.org (Michael R. Head) Date: Fri, 29 Sep 2006 09:38:08 -0000 Subject: [Bug 36596] Re: system freeze after clicking task manager trash icon in "pan" newsreader References: <20060325145711.6279.38615.malonedeb@gandwana.ubuntu.com> Message-ID: <20060929093808.2244.21165.malone@gangotri.ubuntu.com> While I don't doubt that the fglrx drivers are crashy (I have one machine with an radeon x300 that loves to lock up with opengl), This bug is all about the opensource ATI/radeon driver. -- system freeze after clicking task manager trash icon in "pan" newsreader https://launchpad.net/bugs/36596 From michele at befree.it Fri Sep 29 09:59:54 2006 From: michele at befree.it (michelem) Date: Fri, 29 Sep 2006 09:59:54 -0000 Subject: [Bug 37291] Re: NETDEV_TX_BUSY returned when (re)loading driver References: <20060330075920.6253.48234.malonedeb@gandwana.ubuntu.com> Message-ID: <20060929095954.2315.48679.malone@gangotri.ubuntu.com> I get same error on Edgy Eft (kernel 2.6.17-10): ipw2200: Failed to send SCAN_ABORT: Command timed out -- NETDEV_TX_BUSY returned when (re)loading driver https://launchpad.net/bugs/37291 From launchpad at prometoys.net Fri Sep 29 10:07:29 2006 From: launchpad at prometoys.net (Keywan Najafi Tonekaboni) Date: Fri, 29 Sep 2006 10:07:29 -0000 Subject: [Bug 41626] Re: deactivate touchpad while sleep References: <20060426173129.28914.80016.malonedeb@gangotri.ubuntu.com> Message-ID: <20060929100730.2244.92701.launchpad@gangotri.ubuntu.com> ** Changed in: linux-source-2.6.15 (Ubuntu) Status: Unconfirmed => Fix Released -- deactivate touchpad while sleep https://launchpad.net/bugs/41626 From gary_breavington at yahoo.co.uk Fri Sep 29 10:34:41 2006 From: gary_breavington at yahoo.co.uk (SFAOK) Date: Fri, 29 Sep 2006 10:34:41 -0000 Subject: [Bug 57502] Re: JMicron PATA/SATA Controller does not work References: <20060823192235.13463.13121.malonedeb@gandwana.ubuntu.com> Message-ID: <20060929103441.3619.49105.malone@gandwana.ubuntu.com> More confusing behaviour that I think is related to this bug (apologies if not). I have a P5B and I've tried the beta (the desktop install CD) with an IDE DVD writer and a SATA hard drive. I've put the hard drive on both the JMicron controller and the ICH8 controller, tried both AHCI and IDE options on both and tried no extra boot command line options, as well as all-generic-ide and all-generic-ide irqpoll. In all of those combinations, the boot splash screen comes up, the DVD drive does nothing and after a while a screen with "Busy Box" comes up, complaining that it can't access tty because job control is turned off. Once again, apologie if this is the wrong place to be putting this... -- JMicron PATA/SATA Controller does not work https://launchpad.net/bugs/57502 From u219 at m1.holmlund.se Fri Sep 29 11:26:56 2006 From: u219 at m1.holmlund.se (Mattias Holmlund) Date: Fri, 29 Sep 2006 11:26:56 -0000 Subject: [Bug 42572] Re: e1000 driver on thinkpad X60/T60 produces latency References: <20060502130316.30638.54331.malonedeb@gangotri.ubuntu.com> Message-ID: <20060929112656.2244.36632.launchpad@gangotri.ubuntu.com> ** Summary changed: - e1000 driver on thinkpad X60 doesn't auto-load, produces latency + e1000 driver on thinkpad X60/T60 produces latency -- e1000 driver on thinkpad X60/T60 produces latency https://launchpad.net/bugs/42572 From u219 at m1.holmlund.se Fri Sep 29 11:34:34 2006 From: u219 at m1.holmlund.se (Mattias Holmlund) Date: Fri, 29 Sep 2006 11:34:34 -0000 Subject: [Bug 42572] Re: e1000 driver on thinkpad X60/T60 produces latency References: <20060502130316.30638.54331.malonedeb@gangotri.ubuntu.com> Message-ID: <20060929113434.2315.20809.malone@gangotri.ubuntu.com> I have the same alternating latency problem on my Thinkpad T60. It uses the e1000 driver as well. When I ping the Thinkpad from another host on my local network, the ping-times alternate between one second and a few milliseconds, almost always in the sequence long, short, long, short etc. I have tested this with both 6.06.1 and Edgy Eft Knot 3 with the same result. The long latency makes remote X and ssh very painful to use, since the network seems to freeze one second at a time. This problem has been reported in the Kernel bugzilla: http://bugme.osdl.org/show_bug.cgi?id=6929 ** Bug watch added: Linux Kernel Bug Tracker #6929 http://bugzilla.kernel.org/show_bug.cgi?id=6929 ** Also affects: linux (upstream) via http://bugzilla.kernel.org/show_bug.cgi?id=6929 Importance: Unknown Status: Unknown -- e1000 driver on thinkpad X60/T60 produces latency https://launchpad.net/bugs/42572 From zzking at free.fr Fri Sep 29 12:03:36 2006 From: zzking at free.fr (gerard) Date: Fri, 29 Sep 2006 12:03:36 -0000 Subject: [Bug 47489] Re: today's update (May 30) blocked my laptop References: <20060530130738.2224.52062.malonedeb@gangotri.ubuntu.com> Message-ID: <20060929120337.2244.69764.malone@gangotri.ubuntu.com> Hi Ben, my bug is close to #45636 except I cannot even switch to a console Today's update (29-09-2006): I just upgraded to 2.6.15.27.386 and ... stil the same mess I start splash and then kernel panic (which I did not have anymore on 2.6.15.25, it was "only" everything frozen at ID session). In order to help you, I attached a photo of the last page displayed. Thx for your help [IMG]http://i9.tinypic.com/2u5rib4.jpg[/IMG] ** Attachment added: "last page displayed of Kernel panic" http://librarian.launchpad.net/4542005/IMG_1097.JPG -- today's update (May 30) blocked my laptop https://launchpad.net/bugs/47489 From lupine at yorkshire-pagans.org.uk Fri Sep 29 12:08:48 2006 From: lupine at yorkshire-pagans.org.uk (Nick) Date: Fri, 29 Sep 2006 12:08:48 -0000 Subject: [Bug 62960] Problems with booting from the 2.6.17-10 kernel References: <20060929120848.2244.71354.malonedeb@gangotri.ubuntu.com> Message-ID: <20060929120848.2244.71354.malonedeb@gangotri.ubuntu.com> Public bug reported: Binary package hint: linux-source On boot with the default options set in boot line, I get the following while it runs:- /scripts/local-premount hda3: rw=16, want=8, limit=2 I/O error reading swsusp image This is interspersed between lines registering and unregistering USB devices. The kernel doesn't freeze - everything is still responsive - but the boot doesn't proceed from this point. # fdisk -l Disk /dev/hda: 123.5 GB, 123522416640 bytes 255 heads, 63 sectors/track, 15017 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/hda1 1 7295 58597056 83 Linux /dev/hda2 * 7296 10334 24410767+ 83 Linux /dev/hda3 14032 15017 7920045 5 Extended /dev/hda4 10335 14031 29696152+ 83 Linux /dev/hda5 14032 14887 6875788+ 83 Linux /dev/hda6 14888 15017 1044193+ 82 Linux swap / Solaris I've no idea what it's trying to do to the Extended partition - possibly something to do with the swap? - but I think the script in question is in the initrd, and the problem is that / never gets mounted. This happens in both the -generic (amd64) and -386 (i386) kernels, whether I use the UUID= symlinks or /dev/hd?? in GRUB and fstab. for i386, I can't get it to boot at all - luckily I had an old 2.6.17.9 vanilla kernel that boots fine. For amd64, if I use the 'recovery' mode boot, that works - I can then 'telinit 2' to get a normal desktop. ** Affects: linux-meta (Ubuntu) Importance: Undecided Status: Unconfirmed -- Problems with booting from the 2.6.17-10 kernel https://launchpad.net/bugs/62960 From thomas.hotz at gmail.com Fri Sep 29 13:14:20 2006 From: thomas.hotz at gmail.com (Thomas Hotz) Date: Fri, 29 Sep 2006 13:14:20 -0000 Subject: [Bug 62963] Re: p5b and edgy beta References: <20060929121609.3663.61145.malonedeb@gandwana.ubuntu.com> Message-ID: <20060929131420.2315.2352.launchpad@gangotri.ubuntu.com> *** This bug is a duplicate of bug 57502 *** ** This bug has been marked a duplicate of bug 57502 JMicron PATA/SATA Controller does not work ** Summary changed: - p5b and edgy beta + Asus P5b and Edgy Beta -- Asus P5b and Edgy Beta https://launchpad.net/bugs/62963 From thomas.hotz at gmail.com Fri Sep 29 13:14:20 2006 From: thomas.hotz at gmail.com (Thomas Hotz) Date: Fri, 29 Sep 2006 13:14:20 -0000 Subject: [Bug 57502] Re: JMicron PATA/SATA Controller does not work References: <20060823192235.13463.13121.malonedeb@gandwana.ubuntu.com> Message-ID: <20060929131420.2315.46341.launchpad@gangotri.ubuntu.com> ** Bug 62963 has been marked a duplicate of this bug -- JMicron PATA/SATA Controller does not work https://launchpad.net/bugs/57502 From xadas at highline.cz Fri Sep 29 13:31:17 2006 From: xadas at highline.cz (xadas) Date: Fri, 29 Sep 2006 13:31:17 -0000 Subject: [Bug 62978] Cpu scaling does not work on 686 kernels References: <20060929133117.2315.77656.malonedeb@gangotri.ubuntu.com> Message-ID: <20060929133117.2315.77656.malonedeb@gangotri.ubuntu.com> Public bug reported: Binary package hint: linux-generic HW: Sony Vaio VGN-FS550 Intel(R) Pentium(R) M processor 1.60GHz Description: CPU _does not_ scale down on 686 kernel and _does_ scale down on 386 kernel. Ubuntu Dapper (updated) Ubuntu Edgy Beta ** Affects: linux-meta (Ubuntu) Importance: Undecided Status: Unconfirmed -- Cpu scaling does not work on 686 kernels https://launchpad.net/bugs/62978 From xadas at highline.cz Fri Sep 29 13:32:33 2006 From: xadas at highline.cz (xadas) Date: Fri, 29 Sep 2006 13:32:33 -0000 Subject: [Bug 62978] Re: Cpu scaling does not work on 686 kernels References: <20060929133117.2315.77656.malonedeb@gangotri.ubuntu.com> Message-ID: <20060929133233.2315.74960.malone@gangotri.ubuntu.com> ** Attachment added: "dmesg output" http://librarian.launchpad.net/4542164/dmesg.txt -- Cpu scaling does not work on 686 kernels https://launchpad.net/bugs/62978 From xadas at highline.cz Fri Sep 29 13:33:01 2006 From: xadas at highline.cz (xadas) Date: Fri, 29 Sep 2006 13:33:01 -0000 Subject: [Bug 62978] Re: Cpu scaling does not work on 686 kernels References: <20060929133117.2315.77656.malonedeb@gangotri.ubuntu.com> Message-ID: <20060929133301.2315.84421.malone@gangotri.ubuntu.com> ** Attachment added: "lsmod output" http://librarian.launchpad.net/4542165/lsmod.txt -- Cpu scaling does not work on 686 kernels https://launchpad.net/bugs/62978 From Corneliussen at gmail.com Fri Sep 29 13:33:10 2006 From: Corneliussen at gmail.com (Andcor) Date: Fri, 29 Sep 2006 13:33:10 -0000 Subject: [Bug 57502] Re: JMicron PATA/SATA Controller does not work References: <20060823192235.13463.13121.malonedeb@gandwana.ubuntu.com> Message-ID: <20060929133310.2315.15220.malone@gangotri.ubuntu.com> I get the exact same failure as Joel Ebel while trying to boot the beta disc. -- JMicron PATA/SATA Controller does not work https://launchpad.net/bugs/57502 From sen at dizzie.be Fri Sep 29 13:31:04 2006 From: sen at dizzie.be (sen) Date: Fri, 29 Sep 2006 13:31:04 -0000 Subject: [Bug 43745] Re: Ubuntu corrupts real time clock on some dell laptops References: <20060509053346.20684.57755.malonedeb@gangotri.ubuntu.com> Message-ID: <20060929133104.3619.34950.malone@gandwana.ubuntu.com> Tis occurs alson on edgy with an dell inspiron 640m . To fix remove de cell battery : instructions found here http://support.euro.dell.com/support/edocs/systems/ins640m/en/SM/coinbatt.htm#wp1123661 and run the bios setup to set new values . but is there a fix for under edgy ? -- Ubuntu corrupts real time clock on some dell laptops https://launchpad.net/bugs/43745 From xadas at highline.cz Fri Sep 29 13:41:36 2006 From: xadas at highline.cz (xadas) Date: Fri, 29 Sep 2006 13:41:36 -0000 Subject: [Bug 62978] Re: Cpu scaling does not work on 686 kernels References: <20060929133117.2315.77656.malonedeb@gangotri.ubuntu.com> Message-ID: <20060929134136.3663.48680.launchpad@gandwana.ubuntu.com> ** Description changed: Binary package hint: linux-generic HW: Sony Vaio VGN-FS550 Intel(R) Pentium(R) M processor 1.60GHz Description: CPU _does not_ scale down on 686 kernel and _does_ scale - down on 386 kernel. + down on 386 kernel. Desktop with 686 kernel behaves slower even thought + CPU is running full speed... Ubuntu Dapper (updated) Ubuntu Edgy Beta -- Cpu scaling does not work on 686 kernels https://launchpad.net/bugs/62978 From xadas at highline.cz Fri Sep 29 13:51:32 2006 From: xadas at highline.cz (xadas) Date: Fri, 29 Sep 2006 13:51:32 -0000 Subject: [Bug 62978] Re: Cpu scaling does not work on 686 kernels References: <20060929133117.2315.77656.malonedeb@gangotri.ubuntu.com> Message-ID: <20060929135132.2244.97130.malone@gangotri.ubuntu.com> ** Attachment added: "lsmod on linux-generic" http://librarian.launchpad.net/4542182/lsmod-686.txt -- Cpu scaling does not work on 686 kernels https://launchpad.net/bugs/62978 From xadas at highline.cz Fri Sep 29 13:52:01 2006 From: xadas at highline.cz (xadas) Date: Fri, 29 Sep 2006 13:52:01 -0000 Subject: [Bug 62978] Re: Cpu scaling does not work on 686 kernels References: <20060929133117.2315.77656.malonedeb@gangotri.ubuntu.com> Message-ID: <20060929135201.3619.33023.malone@gandwana.ubuntu.com> ** Attachment added: "dmesg on linux-generic" http://librarian.launchpad.net/4542184/dmesg-686.txt -- Cpu scaling does not work on 686 kernels https://launchpad.net/bugs/62978 From rsjtaylor at gmail.com Fri Sep 29 13:54:38 2006 From: rsjtaylor at gmail.com (mimp) Date: Fri, 29 Sep 2006 13:54:38 -0000 Subject: [Bug 43745] Re: Ubuntu corrupts real time clock on some dell laptops References: <20060509053346.20684.57755.malonedeb@gangotri.ubuntu.com> <20060929133104.3619.34950.malone@gandwana.ubuntu.com> Message-ID: <4a29da9d0609290654v764663e3w1d4c5356d1f99925@mail.gmail.com> doing # chmod -x /etc/init.d/hwclock* as suggested in the forum topic linked to in my original bug report seems to have worked for me (i've not had the problem since) but I may just have got lucky - I've not gone looking for trouble as i don't really fancy taking my laptop to bits again. On 29/09/06, sen wrote: > Tis occurs alson on edgy with an dell inspiron 640m . > To fix remove de cell battery : instructions found here http://support.euro.dell.com/support/edocs/systems/ins640m/en/SM/coinbatt.htm#wp1123661 > > and run the bios setup to set new values . > > but is there a fix for under edgy ? > > -- > Ubuntu corrupts real time clock on some dell laptops > https://launchpad.net/bugs/43745 > -- Ubuntu corrupts real time clock on some dell laptops https://launchpad.net/bugs/43745 From sen at dizzie.be Fri Sep 29 14:05:10 2006 From: sen at dizzie.be (sen) Date: Fri, 29 Sep 2006 14:05:10 -0000 Subject: [Bug 43745] Re: Ubuntu corrupts real time clock on some dell laptops References: <20060509053346.20684.57755.malonedeb@gangotri.ubuntu.com> Message-ID: <20060929140510.3663.32924.malone@gandwana.ubuntu.com> Owke will do that , if anything occurs again i will make a post here again tnx for the help tough :) -- Ubuntu corrupts real time clock on some dell laptops https://launchpad.net/bugs/43745 From simon at iki.fi Fri Sep 29 14:13:01 2006 From: simon at iki.fi (=?utf-8?q?Simon_R=C3=B6nnqvist?=) Date: Fri, 29 Sep 2006 14:13:01 -0000 Subject: [Bug 50031] Solution: [regression] Suspend [to-RAM and to-disk] is broken in 2.6.15-25.43 References: <20060616182146.13137.51951.malonedeb@gandwana.ubuntu.com> Message-ID: <20060929141301.3619.9610.malone@gandwana.ubuntu.com> Adding ec_intr=0 to the bootparameters in GRUB seems to solve the problem for ThinkPads. I've tested under Dapper on a R60 and Edgy Beta on R51 today. Short HOWTO: $ sudo nano -w /boot/grub/menu.lst Ctrl-W (Find), look for "kopt" append the line(s) that specify your boot parameters with ec_intr=0 ie. # kopt=root=/dev/sda1 ro ec_intr=0 Ctrl-X (Exit) and choose to save the file $ sudo update-grub Reboot and you're all done! :-) You'll need to repeat this after each kernel update. I found the solution (between the lines) from here: http://www.thinkwiki.org/wiki/How_to_make_ACPI_work http://www.thinkwiki.org/wiki/Problems_with_ACPI_suspend-to-ram While this is easy to solve this isn't the way it's supposed to be, why can't this bug get out of the kernel? It's been hanging out there for quite some time, and affects otherwise very Ubuntu-compatible laptops such as the ThinkPads. I'd like to be able to tell my friends to get a ThinkPad and Ubuntu/Kubuntu and everything will work out of the box. :-) Sadly some get turned off by having to edit kernel parameters, many people don't even know what a kernel or GRUB is. So for these folks it'd be very important to get rid of this rather annoying bug. BTW. Here are some other more complex howtos which seem to get suspend to work (among many other things) on T60:s, haven't tried 'em though: http://vizzzion.org/?id=t60 http://ceallaigh.net/log/2006/06/16/ubuntu-dapper-drake-604-on-a-lenovo-t60-thinkpad/ -- [regression] Suspend [to-RAM and to-disk] is broken in 2.6.15-25.43 https://launchpad.net/bugs/50031 From atouret.nospam at free.fr Fri Sep 29 15:01:23 2006 From: atouret.nospam at free.fr (Alexandre Touret) Date: Fri, 29 Sep 2006 15:01:23 -0000 Subject: [Bug 62995] Linux doesnt support ENE CB-712 SD card reader References: <20060929150123.2244.82060.malonedeb@gangotri.ubuntu.com> Message-ID: <20060929150123.2244.82060.malonedeb@gangotri.ubuntu.com> Public bug reported: Binary package hint: linux-image-2.6-amd64-k8-smp Hello I bought an acer aspire 5102 WLMI cx108 with a pcmcia sd card reader . I installed Ubuntu Dapper (kernel 2.6.15). Unfortunately my sd card reader seems to be not supported. I also tested with later kernels (2.6.17 and 2.6.18) and some distributions (mandrake, fedora,... and I have the same behaviour. $lspci -s 06:04 0000:06:04.0 CardBus bridge: ENE Technology Inc CB-712/4 Cardbus Controller (rev 10) 0000:06:04.1 FLASH memory: ENE Technology Inc ENE PCI Memory Stick Card Reader Controller (rev 01) 0000:06:04.2 0805: ENE Technology Inc ENE PCI Secure Digital Card Reader Controller (rev 01) 0000:06:04.3 FLASH memory: ENE Technology Inc: Unknown device 0520 (rev 01) 0000:06:04.4 FLASH memory: ENE Technology Inc: Unknown device 0551 (rev 01) $lspci -v -s 06:04 0000:06:04.0 CardBus bridge: ENE Technology Inc CB-712/4 Cardbus Controller (rev 10) Subsystem: Acer Incorporated [ALI]: Unknown device 009f Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- Reset+ 16bInt+ PostWrite+ 16-bit legacy interface ports at 0001 0000:06:04.1 FLASH memory: ENE Technology Inc ENE PCI Memory Stick Card Reader Controller (rev 01) Subsystem: Acer Incorporated [ALI]: Unknown device 009f Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- Message-ID: <20060929154247.3663.78300.launchpad@gandwana.ubuntu.com> ** Changed in: acpi-support (Ubuntu) Assignee: Simon Law => (unassigned) Status: Needs Info => Confirmed -- Keyboard and touchpad doesn't work after suspend-to-ram on a Fujitsu-Siemens Amilo M1420 https://launchpad.net/bugs/25673 From mjg59 at codon.org.uk Fri Sep 29 15:53:35 2006 From: mjg59 at codon.org.uk (Matthew Garrett) Date: Fri, 29 Sep 2006 15:53:35 -0000 Subject: [Bug 25673] Re: Keyboard and touchpad doesn't work after suspend-to-ram on a Fujitsu-Siemens Amilo M1420 References: <20060113143457.21012.29014.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060929155335.2244.41680.launchpad@gangotri.ubuntu.com> ** Changed in: acpi-support (Ubuntu) Sourcepackagename: acpi-support => linux-source-2.6.17 -- Keyboard and touchpad doesn't work after suspend-to-ram on a Fujitsu-Siemens Amilo M1420 https://launchpad.net/bugs/25673 From caroline.ford.work at googlemail.com Fri Sep 29 16:47:10 2006 From: caroline.ford.work at googlemail.com (Caroline Ford) Date: Fri, 29 Sep 2006 16:47:10 -0000 Subject: [Bug 62806] Re: kernel freezes on boot when USB-legacy is turned on References: <20060928143124.3619.2357.malonedeb@gandwana.ubuntu.com> Message-ID: <20060929164710.3619.90294.launchpad@gandwana.ubuntu.com> *** This bug is a duplicate of bug 47241 *** ** This bug has been marked a duplicate of bug 47241 freezes on boot -- kernel freezes on boot when USB-legacy is turned on https://launchpad.net/bugs/62806 From caroline.ford.work at googlemail.com Fri Sep 29 16:47:10 2006 From: caroline.ford.work at googlemail.com (Caroline Ford) Date: Fri, 29 Sep 2006 16:47:10 -0000 Subject: [Bug 47241] Re: freezes on boot References: <20060529075557.21895.60622.malonedeb@gandwana.ubuntu.com> Message-ID: <20060929164710.3619.93216.launchpad@gandwana.ubuntu.com> ** Bug 62806 has been marked a duplicate of this bug -- freezes on boot https://launchpad.net/bugs/47241 From mzilhao at sapo.pt Fri Sep 29 17:14:47 2006 From: mzilhao at sapo.pt (Miguel) Date: Fri, 29 Sep 2006 17:14:47 -0000 Subject: [Bug 44805] Re: "critical temperature reached" with kernel 2.6.15-22-386 References: <20060515103402.15848.98592.malonedeb@gangotri.ubuntu.com> Message-ID: <20060929171447.3663.8837.malone@gandwana.ubuntu.com> the same thing happens with kernel 2.6.17-10-generic -- "critical temperature reached" with kernel 2.6.15-22-386 https://launchpad.net/bugs/44805 From godotcg-launchpad at yahoo.fr Fri Sep 29 17:50:42 2006 From: godotcg-launchpad at yahoo.fr (godot) Date: Fri, 29 Sep 2006 17:50:42 -0000 Subject: [Bug 57502] Re: JMicron PATA/SATA Controller does not work References: <20060823192235.13463.13121.malonedeb@gandwana.ubuntu.com> Message-ID: <20060929175042.2244.26974.malone@gangotri.ubuntu.com> I confirm too, I have same failure than Joel Ebel when booting the beta desktop disc. With the alternate cd, it doesn't find the cd drive or the driver for the drive (I don't remember) and I tried a few drivers in the list it prompts, but no success. Core 2 duo, MSI Neo-F In the same time, I don't know if it's the same bug but : I can install Dapper, and then upgrade to Edgy, but Edgy won't finish booting with 2.6.17-10 kernels. It stops to "booting: Waiting for root filesystem", and then after approx. 4 minutes it says it doesn't find my partition (with UUID or by directly suppling /dev/sdaX). And indeed if I type `ls /dev/sd*` under BusyBox, there's nothing. But with the kernel Dapper I still have, it boots fine (with UUID or with root=/dev/sdaX) -- JMicron PATA/SATA Controller does not work https://launchpad.net/bugs/57502 From kiko at async.com.br Fri Sep 29 18:02:57 2006 From: kiko at async.com.br (Christian Reis) Date: Fri, 29 Sep 2006 18:02:57 -0000 Subject: [Bug 29720] Re: Gnome hangs DVD reading DVD+RW disc References: <20060126060810.9306.91029.malonedeb@gandwana.ubuntu.com> Message-ID: <20060929180258.3663.31127.launchpad@gandwana.ubuntu.com> ** Bug watch removed: GNOME Bug Tracker # 333108 http://bugzilla.gnome.org/show_bug.cgi?id= 333108 ** Bug watch added: GNOME Bug Tracker #333108 http://bugzilla.gnome.org/show_bug.cgi?id=333108 -- Gnome hangs DVD reading DVD+RW disc https://launchpad.net/bugs/29720 From kiko at async.com.br Fri Sep 29 18:07:10 2006 From: kiko at async.com.br (Christian Reis) Date: Fri, 29 Sep 2006 18:07:10 -0000 Subject: [Bug 31073] Re: Network not work with this kernel on my laptop HP NX7010 References: <20060210180357.11382.69470.malonedeb@gandwana.ubuntu.com> Message-ID: <20060929180710.3663.74881.launchpad@gandwana.ubuntu.com> ** Bug watch removed: Linux Kernel Bug Tracker #31073 http://bugzilla.kernel.org/show_bug.cgi?id=31073 ** Bug watch added: Linux Kernel Bug Tracker #0 http://bugzilla.kernel.org/show_bug.cgi?id=0 -- Network not work with this kernel on my laptop HP NX7010 https://launchpad.net/bugs/31073 From kiko at async.com.br Fri Sep 29 18:06:04 2006 From: kiko at async.com.br (Christian Reis) Date: Fri, 29 Sep 2006 18:06:04 -0000 Subject: [Bug 31025] Re: New headers/image of 2.6.15-15 kills network on reboot References: <20060210034600.11382.58707.malonedeb@gandwana.ubuntu.com> Message-ID: <20060929180604.3619.85922.launchpad@gandwana.ubuntu.com> ** Bug watch removed: Linux Kernel Bug Tracker #31025 http://bugzilla.kernel.org/show_bug.cgi?id=31025 ** Bug watch added: Linux Kernel Bug Tracker #0 http://bugzilla.kernel.org/show_bug.cgi?id=0 -- New headers/image of 2.6.15-15 kills network on reboot https://launchpad.net/bugs/31025 From ubuntu at whurley.com Fri Sep 29 18:46:01 2006 From: ubuntu at whurley.com (whurley) Date: Fri, 29 Sep 2006 18:46:01 -0000 Subject: [Bug 63028] Ubuntu-server Installation freezes on AMD Dual Proc server References: <20060929184601.2244.44306.malonedeb@gangotri.ubuntu.com> Message-ID: <20060929184601.2244.44306.malonedeb@gangotri.ubuntu.com> Public bug reported: Ubuntu-server Installation freezes on AMD Dual Proc server I've been seeing a freeze at the exact same point in the installation when trying to install on a Penguin Computing box containing dual AMD Opteron 248s with 4GB ram and the Northbridge chipset. The freeze occurs right after "io scheduler cfg registered" and right before what I believe should be the ramdisk/kernel load. I have tried almost every bios setting and boot option that can be imagined (apic, nolapic, apci, so on and so on). Several people have suggested solutions, however none have worked. So far people have blamed the bios, kernel, and memory manager with consistency but nothing that has been suggested has any effect. I did also use the debug options in the boot line however the output was useless and ended at the exact same point (io scheduler cfg registered). NOTE: there is no CD drive in this box so we are using the on board USB connection to connect a drive to. I have no idea if that effects anything but I do know that every other distro we try (Gentoo, Knoppix, etc.) all boot from that drive and the liveCDs work as well. Please let me know if there is any other information I can provide (send mail to ubuntu @ whurley.com) ** Affects: linux-source-2.6.15 (Ubuntu) Importance: Undecided Status: Unconfirmed -- Ubuntu-server Installation freezes on AMD Dual Proc server https://launchpad.net/bugs/63028 From thrain2 at gmail.com Fri Sep 29 19:17:01 2006 From: thrain2 at gmail.com (Lucas.Tarr) Date: Fri, 29 Sep 2006 19:17:01 -0000 Subject: [Bug 50031] Re: [regression] Suspend [to-RAM and to-disk] is broken in 2.6.15-25.43 References: <20060616182146.13137.51951.malonedeb@gandwana.ubuntu.com> Message-ID: <20060929191701.3619.76553.malone@gandwana.ubuntu.com> After trying all of the above proposed fixes/workarounds, I've found that none of them work on my T41p 2374-GGU for Suspend to Ram. It's still the same thing as before: it suspends, resumes, but as soon as I try to access the harddrive it freezes. Suspend to Disk works fine, though I do have to remember to have wireless on with fn-f5 before i suspend to disk; otherwise it can no longer figure out that the wireless adapter exists. -- [regression] Suspend [to-RAM and to-disk] is broken in 2.6.15-25.43 https://launchpad.net/bugs/50031 From eddie.hung at gmail.com Fri Sep 29 21:15:26 2006 From: eddie.hung at gmail.com (Eddie) Date: Fri, 29 Sep 2006 21:15:26 -0000 Subject: [Bug 34752] Re: [atmel] breezy->dapper wifi lost: signal power to 0 References: <20060313122743.17044.67675.malonedeb@gangotri.ubuntu.com> Message-ID: <20060929211526.3619.52819.malone@gandwana.ubuntu.com> Oops, seems I spoke too soon - I've tried my 3com card on another accesspoint (D-Link one) and it no longer works, with or without WEP encryption, I can't seem to associate properly. However, previously, it worked on a 3com AP. I have a suspicion that it's something to do with the authentication mode (sudo iwconfig key open|restricted xxxxxxx). I seem to recall that on my 3com router, I didn't need to specify open (unfortunately I don't have access to the 3com router anymore) and it still worked, whereas that is not the case for my D-Link (which I now have access to, and I have tested under edgy that "open" is required) Can someone please confirm? Thanks! -- [atmel] breezy->dapper wifi lost: signal power to 0 https://launchpad.net/bugs/34752 From eddie.hung at gmail.com Fri Sep 29 22:24:17 2006 From: eddie.hung at gmail.com (Eddie) Date: Fri, 29 Sep 2006 22:24:17 -0000 Subject: [Bug 34752] Re: [atmel] breezy->dapper wifi lost: signal power to 0 References: <20060313122743.17044.67675.malonedeb@gangotri.ubuntu.com> Message-ID: <20060929222417.2244.73090.malone@gangotri.ubuntu.com> Sorry for all these comments, but I think I've got to the bottom of this issue! The problem here is that the driver does not work for "open" authentication, but does for "shared" (i.e. iwconfig key restricted) - I've just changed my D-Link router over to shared, and it worked fine! -- [atmel] breezy->dapper wifi lost: signal power to 0 https://launchpad.net/bugs/34752 From sargosis at gmail.com Fri Sep 29 23:14:28 2006 From: sargosis at gmail.com (sargosis) Date: Fri, 29 Sep 2006 23:14:28 -0000 Subject: [Bug 57502] Re: JMicron PATA/SATA Controller does not work References: <20060823192235.13463.13121.malonedeb@gandwana.ubuntu.com> Message-ID: <20060929231428.2315.26705.malone@gangotri.ubuntu.com> I can also confirm an error. The CD rom detection goes smoothly (although it did have a hard time with my keyboard for some reason), but now, it can't detect my hard drives. I've got an IDE-connected DVD-RW on a P5b mobo and two SATA hard drives connected to channels 1 and 2 internally. -- JMicron PATA/SATA Controller does not work https://launchpad.net/bugs/57502 From pc741tw at gmail.com Sat Sep 30 01:55:57 2006 From: pc741tw at gmail.com (Someone) Date: Sat, 30 Sep 2006 01:55:57 -0000 Subject: [Bug 57502] Re: JMicron PATA/SATA Controller does not work References: <20060823192235.13463.13121.malonedeb@gandwana.ubuntu.com> Message-ID: <20060930015557.3663.83193.malone@gandwana.ubuntu.com> I try it. Using AHCI can detect hard drives. But setup will not succeed. (Base system) -- JMicron PATA/SATA Controller does not work https://launchpad.net/bugs/57502 From rekahsoft at gmail.com Sat Sep 30 02:07:59 2006 From: rekahsoft at gmail.com (Collin) Date: Sat, 30 Sep 2006 02:07:59 -0000 Subject: [Bug 59983] Re: ndiswrapper in edgy broken References: <20060911235728.16647.6163.malonedeb@gangotri.ubuntu.com> Message-ID: <20060930020759.2244.48187.malone@gangotri.ubuntu.com> I have the same problem as the rest of you...my fix was to unistall the ndiswrapper-1.1 stuff and install the new 1.8 ndiswrapper...then i have to use the command ndiswrapper-1.8 in my terminal to configure it. -- ndiswrapper in edgy broken https://launchpad.net/bugs/59983 From ireneshusband at yahoo.co.uk Sat Sep 30 07:26:07 2006 From: ireneshusband at yahoo.co.uk (Robert Persson) Date: Sat, 30 Sep 2006 07:26:07 -0000 Subject: [Bug 31291] Re: Ondemand governor for cpufreq put the CPU at maximum frequency always References: <20060213095854.1459.26283.malonedeb@gangotri.ubuntu.com> Message-ID: <20060930072607.2315.59886.malone@gangotri.ubuntu.com> I have found frequency scaling not to be working on my pentium 4 box when it did work on the previous Gentoo installation (which unfortunately I have trashed so I won't be able to tell you which kernel I was using beyond that it was a 2.6.15 variant). What I would expect to happen would be for me to drop the gnome frequency scaling applet on the top bar and be able to choose my governor or frequency. Instead I get a message saying frequency scaling is not supported. Perhaps there are some kernel modules I need to modprobe, but this is the kind of thing that should work out of the box. The processor is a hyperthreading P4 and the motherboard is an Asus p4p- 800se (intel 865 chipset). -- Ondemand governor for cpufreq put the CPU at maximum frequency always https://launchpad.net/bugs/31291 From gigaday at googlemail.com Sat Sep 30 07:37:24 2006 From: gigaday at googlemail.com (Tony Austin) Date: Sat, 30 Sep 2006 07:37:24 -0000 Subject: [Bug 63115] no sound from speakers after suspend References: <20060930073724.2315.44421.malonedeb@gangotri.ubuntu.com> Message-ID: <20060930073724.2315.44421.malonedeb@gangotri.ubuntu.com> Public bug reported: There is no sound from the speakers after I suspend my HP nx8220 laptop. There _is_ sound from the headphones if I plug them in. I have tried fiddling with settings in the Volume Control and the "killall esd" workaround, loggin off and on but none of these actions help. ** Affects: linux-source-2.6.15 (Ubuntu) Importance: Undecided Status: Unconfirmed ** Tags added: sound -- no sound from speakers after suspend https://launchpad.net/bugs/63115 From james.w.dumay at gmail.com Sat Sep 30 07:39:27 2006 From: james.w.dumay at gmail.com (James W. Dumay) Date: Sat, 30 Sep 2006 07:39:27 -0000 Subject: [Bug 59983] Re: ndiswrapper in edgy broken References: <20060911235728.16647.6163.malonedeb@gangotri.ubuntu.com> Message-ID: <20060930073927.2315.82376.malone@gangotri.ubuntu.com> I also get the module loading error. Im running off of the first Beta release. -- ndiswrapper in edgy broken https://launchpad.net/bugs/59983 From bugwatch at bugs.launchpad.net Sat Sep 30 07:35:27 2006 From: bugwatch at bugs.launchpad.net (Bug Watch Updater) Date: Sat, 30 Sep 2006 07:35:27 -0000 Subject: [Bug 29720] Re: Gnome hangs DVD reading DVD+RW disc References: <20060126060810.9306.91029.malonedeb@gandwana.ubuntu.com> Message-ID: <20060930073542.2863.96539.launchpad@gangotri.ubuntu.com> ** Changed in: gnome-media (upstream) Status: Unknown => Rejected -- Gnome hangs DVD reading DVD+RW disc https://launchpad.net/bugs/29720 From bugwatch at bugs.launchpad.net Sat Sep 30 07:38:20 2006 From: bugwatch at bugs.launchpad.net (Bug Watch Updater) Date: Sat, 30 Sep 2006 07:38:20 -0000 Subject: [Bug 42572] Re: e1000 driver on thinkpad X60/T60 produces latency References: <20060502130316.30638.54331.malonedeb@gangotri.ubuntu.com> Message-ID: <20060930073824.2863.74924.launchpad@gangotri.ubuntu.com> ** Changed in: linux (upstream) Status: Unknown => Confirmed -- e1000 driver on thinkpad X60/T60 produces latency https://launchpad.net/bugs/42572 From dgamble1 at shaw.ca Sat Sep 30 07:39:27 2006 From: dgamble1 at shaw.ca (dgamble) Date: Sat, 30 Sep 2006 07:39:27 -0000 Subject: [Bug 57502] Re: JMicron PATA/SATA Controller does not work References: <20060823192235.13463.13121.malonedeb@gandwana.ubuntu.com> Message-ID: <20060930073927.2244.55394.malone@gangotri.ubuntu.com> I also tried the 20060928 daily (alternate, 64-bit) image, and I too have the same result that Joel Ebel had. The Dapper install fails in the way described in the first post. I also tried uplugging the SATA drive and just booted with the pair of PATA optical drives; no change. MSI P965 Neo, Core 2 Duo E6400. Anything I could provide or do to help get this issue finally resolved? I am really hoping I am not stuck with Windows. -- JMicron PATA/SATA Controller does not work https://launchpad.net/bugs/57502 From ivoks at grad.hr Sat Sep 30 07:47:50 2006 From: ivoks at grad.hr (=?utf-8?q?Ante_Karamati=C4=87?=) Date: Sat, 30 Sep 2006 07:47:50 -0000 Subject: [Bug 57502] Re: JMicron PATA/SATA Controller does not work References: <20060823192235.13463.13121.malonedeb@gandwana.ubuntu.com> <20060930015557.3663.83193.malone@gandwana.ubuntu.com> Message-ID: <1159602470.27672.14.camel@i8600.gfr.local> IDE devices, connected to IDE part of Jmicron controller now work. SATA disks connected to SATA part of Jmicron controller also work, but it's not possible to boot from it (grub error 15, iirc). ICH8 SATA controller doesn't work. This is a known situation. This is another bug and is totally unrelated to this bug. In Dapper is other way arround. ICH8 works, but Jmicron doesn't. So, you can easily install Dapper using PXE boot/install. So, there's no need for anymore confirmation. ICH8 bug is real and known. -- Ante Karamatić PGP: 0xD3BDA225 -- JMicron PATA/SATA Controller does not work https://launchpad.net/bugs/57502 From james.w.dumay at gmail.com Sat Sep 30 07:50:36 2006 From: james.w.dumay at gmail.com (James W. Dumay) Date: Sat, 30 Sep 2006 07:50:36 -0000 Subject: [Bug 59983] Re: ndiswrapper in edgy broken References: <20060911235728.16647.6163.malonedeb@gangotri.ubuntu.com> Message-ID: <20060930075036.3619.96643.malone@gandwana.ubuntu.com> I can confirm that version 1.8 works correctly -- ndiswrapper in edgy broken https://launchpad.net/bugs/59983 From sidney440 at arcor.de Sat Sep 30 08:30:07 2006 From: sidney440 at arcor.de (Sidney) Date: Sat, 30 Sep 2006 08:30:07 -0000 Subject: [Bug 39315] Re: Keyboard random repeat and dropped key presses References: <20060412160910.15436.50293.malonedeb@gangotri.ubuntu.com> Message-ID: <20060930083007.2244.85986.malone@gangotri.ubuntu.com> Running both Dapper and up-to-date Edgy on a Toshiba M30 here. BOTH produce this error, though Edgy seems to work better. I tried all the tricks mentioned here except turning off ACPI, because I still need that. -- Keyboard random repeat and dropped key presses https://launchpad.net/bugs/39315 From bastian.doetsch at gmx.de Sat Sep 30 08:46:14 2006 From: bastian.doetsch at gmx.de (Bastian Doetsch) Date: Sat, 30 Sep 2006 08:46:14 -0000 Subject: [Bug 63125] [edgy] X crashes when logging in running linux-generic-2.6.17-10 References: <20060930084614.3663.74477.malonedeb@gandwana.ubuntu.com> Message-ID: <20060930084614.3663.74477.malonedeb@gandwana.ubuntu.com> Public bug reported: Binary package hint: linux-generic X crashes when logging in. Might be that the crash occurs when the window manager (in my case compiz) is started. This only happens with the kernel 2.6.17-10, under 2.6.17-9 it works flawlessly. ** Affects: linux-meta (Ubuntu) Importance: Undecided Status: Unconfirmed -- [edgy] X crashes when logging in running linux-generic-2.6.17-10 https://launchpad.net/bugs/63125 From bastian.doetsch at gmx.de Sat Sep 30 09:35:49 2006 From: bastian.doetsch at gmx.de (Bastian Doetsch) Date: Sat, 30 Sep 2006 09:35:49 -0000 Subject: [Bug 63125] Re: [edgy] X crashes when logging in running linux-generic-2.6.17-10 References: <20060930084614.3663.74477.malonedeb@gandwana.ubuntu.com> Message-ID: <20060930093549.3619.13264.malone@gandwana.ubuntu.com> found a core file that might help... ** Attachment added: "core file" http://librarian.launchpad.net/4557398/core.6093.bz2 -- [edgy] X crashes when logging in running linux-generic-2.6.17-10 https://launchpad.net/bugs/63125 From ubuntu at laurenssimonis.com Sat Sep 30 10:17:02 2006 From: ubuntu at laurenssimonis.com (Laurens Simonis) Date: Sat, 30 Sep 2006 10:17:02 -0000 Subject: [Bug 36596] Re: system freeze after clicking task manager trash icon in "pan" newsreader References: <20060325145711.6279.38615.malonedeb@gandwana.ubuntu.com> Message-ID: <20060930101702.2315.25179.malone@gangotri.ubuntu.com> With the fglrx driver not loaded, and with Paul's patches applied, I have had no crash whatsover: I'm unable to crash my machine. So, to me, it looks as if (at least in 16 bit mode), paul's patches do the trick just fine! -- system freeze after clicking task manager trash icon in "pan" newsreader https://launchpad.net/bugs/36596 From Stevan_White at hotmail.com Sat Sep 30 10:59:07 2006 From: Stevan_White at hotmail.com (Steve White) Date: Sat, 30 Sep 2006 10:59:07 -0000 Subject: [Bug 49141] Re: ksoftirqd eats all cpu References: <20060609125942.22534.27401.malonedeb@gangotri.ubuntu.com> Message-ID: <20060930105907.2315.61775.malone@gangotri.ubuntu.com> I see this effect when I turn my wireless radio off. -- ksoftirqd eats all cpu https://launchpad.net/bugs/49141 From Stevan_White at hotmail.com Sat Sep 30 11:00:06 2006 From: Stevan_White at hotmail.com (Steve White) Date: Sat, 30 Sep 2006 11:00:06 -0000 Subject: [Bug 49141] Re: ksoftirqd eats all cpu References: <20060609125942.22534.27401.malonedeb@gangotri.ubuntu.com> Message-ID: <20060930110006.2315.30773.malone@gangotri.ubuntu.com> Note there are lots of complaints about ksoftirqd getting into such states: http://lists.debian.org/debian-user/2003/04/msg00087.html http://lists.xensource.com/archives/html/xen-devel/2006-04/msg00489.html http://www.linuxquestions.org/questions/showthread.php?t=388745 -- ksoftirqd eats all cpu https://launchpad.net/bugs/49141 From StempUbuntu at gmail.com Sat Sep 30 11:50:41 2006 From: StempUbuntu at gmail.com (Stemp) Date: Sat, 30 Sep 2006 11:50:41 -0000 Subject: [Bug 34351] Re: Sound related issues with saa7134 References: <20060310194801.17018.83828.malonedeb@gangotri.ubuntu.com> Message-ID: <20060930115041.3619.25876.malone@gandwana.ubuntu.com> Fixed in Edgy Beta -- Sound related issues with saa7134 https://launchpad.net/bugs/34351 From profox at ubuntu-nl.org Sat Sep 30 12:25:20 2006 From: profox at ubuntu-nl.org (profoX) Date: Sat, 30 Sep 2006 12:25:20 -0000 Subject: [Bug 36596] Re: system freeze after clicking task manager trash icon in "pan" newsreader References: <20060325145711.6279.38615.malonedeb@gandwana.ubuntu.com> Message-ID: <20060930122520.2244.20206.malone@gangotri.ubuntu.com> For me, 16 bit mode works without the patch fine too... -- system freeze after clicking task manager trash icon in "pan" newsreader https://launchpad.net/bugs/36596 From johannes.schmidt at physik.uni-muenchen.de Sat Sep 30 12:49:52 2006 From: johannes.schmidt at physik.uni-muenchen.de (Johannes Schmidt) Date: Sat, 30 Sep 2006 12:49:52 -0000 Subject: [Bug 22148] Re: MSI Neo4 FI hangs without acpi=off References: <20060113141642.21012.13502.launchpad@macquarie.warthogs.hbd.com> Message-ID: <20060930124952.3663.63235.malone@gandwana.ubuntu.com> A few annotations: With no additional boot parameters, ubuntu freezes at * Loading ACPI modules... (only pressing the power button works). Using the quiet option, there is a further error message: PCI: Cannot allocate resource region 8 of bridge ???:?? [a few numbers] But none of the options above (i.e. pci=noacpi etc.) work except acpi=off. According to http://www.linux-on-laptops.com/samsung.html, it seems to work with Debian and OpenSuSE 10.1: http://oogametogamie.dyndns.org/x60/laptop-samsung-x60.html http://www.schusdziarra.de/Linux/X60.html I have tried Bios versions 05xa, 07xa and 08xa (the newest Bios), but no changes. I have attached the output of dmesg (the error messages of sdhci, introduced in 2.6.17-10 are already reported). Thanks for any help! Johannes ** Attachment added: "dmesg output" http://librarian.launchpad.net/4558228/dmesg.acpioff2.txt -- MSI Neo4 FI hangs without acpi=off https://launchpad.net/bugs/22148 From pgehan at wanadoo.fr Sat Sep 30 12:54:08 2006 From: pgehan at wanadoo.fr (Eros) Date: Sat, 30 Sep 2006 12:54:08 -0000 Subject: [Bug 62716] Re: USB MIDI Keyboard mistaken for a sound output References: <20060928033047.5066.15043.malonedeb@gangotri.ubuntu.com> Message-ID: <20060930125408.3663.54795.malone@gandwana.ubuntu.com> *** This bug is a duplicate of bug 46996 *** Thanks. -- USB MIDI Keyboard mistaken for a sound output https://launchpad.net/bugs/62716 From ben.collins at ubuntu.com Sat Sep 30 13:48:01 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Sat, 30 Sep 2006 13:48:01 -0000 Subject: [Bug 35004] Re: USB devices are not shown in /procu/bus/usb/ causing VMWare to fail to see them References: <20060315085103.30082.81158.malonedeb@gandwana.ubuntu.com> Message-ID: <20060930134802.3663.64255.launchpad@gandwana.ubuntu.com> ** Changed in: usbutils (Ubuntu) Target: None => ubuntu-6.10 -- USB devices are not shown in /procu/bus/usb/ causing VMWare to fail to see them https://launchpad.net/bugs/35004 From ben.collins at ubuntu.com Sat Sep 30 14:10:38 2006 From: ben.collins at ubuntu.com (Ben Collins) Date: Sat, 30 Sep 2006 14:10:38 -0000 Subject: [Bug 35004] Re: USB devices are not shown in /procu/bus/usb/ causing VMWare to fail to see them References: <20060315085103.30082.81158.malonedeb@gandwana.ubuntu.com> Message-ID: <20060930141039.2244.24804.malone@gangotri.ubuntu.com> initscripts already mounts some other psuedo filesystems, so I'll add this there. ** Changed in: usbutils (Ubuntu) Sourcepackagename: usbutils => sysvinit Status: Confirmed => In Progress -- USB devices are not shown in /procu/bus/usb/ causing VMWare to fail to see them https://launchpad.net/bugs/35004 From sergey.udaltsov at gmail.com Sat Sep 30 15:40:36 2006 From: sergey.udaltsov at gmail.com (Sergey V. Udaltsov) Date: Sat, 30 Sep 2006 15:40:36 -0000 Subject: [Bug 63197] There is no linux-restricted-modules-2.6.17-10-powerpc64-smp References: <20060930154037.3663.12900.malonedeb@gandwana.ubuntu.com> Message-ID: <20060930154037.3663.12900.malonedeb@gandwana.ubuntu.com> Public bug reported: Binary package hint: linux-restricted-modules-2.6-power4-smp Actually the module I report this bug against is wrong - there is simply NO restricted modules built for powerpc64-smp. Would it be possible to have it? Thanks. ** Affects: linux-meta (Ubuntu) Importance: Undecided Status: Unconfirmed -- There is no linux-restricted-modules-2.6.17-10-powerpc64-smp https://launchpad.net/bugs/63197 From baptisteguerre at gmail.com Sat Sep 30 15:54:41 2006 From: baptisteguerre at gmail.com (Baptiste) Date: Sat, 30 Sep 2006 15:54:41 -0000 Subject: [Bug 37055] Speakers not muted when headphones are plugged in References: <20060328193332.7313.68283.malonedeb@gangotri.ubuntu.com> Message-ID: <20060930155441.2315.94732.launchpad@canonical@gangotri.ubuntu.com> Public bug reported: Plugging headphone on my laptop zv5421ea doesn't desactivate the sound of the baffles. It is a very annoying problem when you want to hear music in public places (train, etc). ** Affects: linux-source-2.6.15 (Ubuntu) Importance: Medium Status: Needs Info -- Speakers not muted when headphones are plugged in https://launchpad.net/bugs/37055 From ash211 at gmail.com Sat Sep 30 15:46:29 2006 From: ash211 at gmail.com (Andrew Ash) Date: Sat, 30 Sep 2006 15:46:29 -0000 Subject: [Bug 37055] Re: Speakers not muted when headphones are plugged in References: <20060328193332.7313.68283.malonedeb@gangotri.ubuntu.com> Message-ID: <20060930154629.2315.94736.malone@gangotri.ubuntu.com> Could you please test this on the Edgy Beta to see if the defaults are still incorrect? If they are, then they should be changed. If not, then the problem has been fixed already! Thanks -- Speakers not muted when headphones are plugged in https://launchpad.net/bugs/37055 From ash211 at gmail.com Sat Sep 30 15:54:41 2006 From: ash211 at gmail.com (Andrew Ash) Date: Sat, 30 Sep 2006 15:54:41 -0000 Subject: [Bug 37055] Re: Speakers not muted when headphones are plugged in References: <20060328193332.7313.68283.malonedeb@gangotri.ubuntu.com> Message-ID: <20060930155441.2315.20307.launchpad@gangotri.ubuntu.com> ** Changed in: Ubuntu Sourcepackagename: None => linux-source-2.6.15 -- Speakers not muted when headphones are plugged in https://launchpad.net/bugs/37055 From dgamble1 at shaw.ca Sat Sep 30 16:09:22 2006 From: dgamble1 at shaw.ca (dgamble) Date: Sat, 30 Sep 2006 16:09:22 -0000 Subject: [Bug 57502] Re: JMicron PATA/SATA Controller does not work References: <20060823192235.13463.13121.malonedeb@gandwana.ubuntu.com> Message-ID: <20060930160922.2315.66085.malone@gangotri.ubuntu.com> Just to quickly respond to Ante here, IDE devices, connected to the IDE part of Jmicron controller, definitely still don't work- at least for me and many other people here. But, it does now seem to work for some people, at least. -- JMicron PATA/SATA Controller does not work https://launchpad.net/bugs/57502 From scott at ubuntu.com Sat Sep 30 16:05:53 2006 From: scott at ubuntu.com (Scott James Remnant) Date: Sat, 30 Sep 2006 16:05:53 -0000 Subject: [Bug 35004] Re: USB devices are not shown in /procu/bus/usb/ causing VMWare to fail to see them References: <20060315085103.30082.81158.malonedeb@gandwana.ubuntu.com> Message-ID: <20060930160553.2244.31680.malone@gangotri.ubuntu.com> Ben, please don't do this just yet Note that it's very deliberately commented out -- we'll reenable it for the release candidate. I've reassigned this to me. And could someone please fix vmware? ** Changed in: sysvinit (Ubuntu) Assignee: Ben Collins => Scott James Remnant -- USB devices are not shown in /procu/bus/usb/ causing VMWare to fail to see them https://launchpad.net/bugs/35004 From scott at ubuntu.com Sat Sep 30 16:12:38 2006 From: scott at ubuntu.com (Scott James Remnant) Date: Sat, 30 Sep 2006 16:12:38 -0000 Subject: [Bug 35004] Re: USB devices are not shown in /procu/bus/usb/ causing VMWare to fail to see them References: <20060315085103.30082.81158.malonedeb@gandwana.ubuntu.com> Message-ID: <20060930161238.2315.41090.malone@gangotri.ubuntu.com> Further details: /proc/bus/usb is a pseudo-filesystem that contains special files that magically map to individual usb devices It's been deprecated and unsupported for a while now, and is on gregkh's hit list of things to be removed from the kernel entirely. It's been replaced by /dev/bus/usb, a udev-maintained directory in the same format (but using character devices instead of files). Applications can use this without knowing the difference, with just a path change. Note that there's no /dev/bus/usb/devices (equivalent to the old /proc/bus/usb/devices file). An application that wants to know that kind of detail would need to iterate /sys/bus/usb/devices or use HAL). We disable /proc/bus/usb in development releases to prevent any software from using it, and generally encourage people away from it. We re- enable it in the release candidate, but only for the root user. -- USB devices are not shown in /procu/bus/usb/ causing VMWare to fail to see them https://launchpad.net/bugs/35004 From ubuntu at tjworld.net Sat Sep 30 21:45:46 2006 From: ubuntu at tjworld.net (TJ) Date: Sat, 30 Sep 2006 21:45:46 -0000 Subject: [Bug 63165] <3>BUG: soft lockup detected on CPU#1! References: <20060930124119.3663.69076.malonedeb@gandwana.ubuntu.com> Message-ID: <20060930214546.3619.71529.launchpad@canonical@gandwana.ubuntu.com> Public bug reported: I've just installed Server 6.06 on a dual-CPU Asus A7M266-D. I also installed the LAMP packages, webmin and sshd. I left the server ticking over for a soak test with no customisations or web applications installed. After about 18 hours it crashed with the following report in kern.log. I'm not sure from the report where to being looking to debug this. Since rebooting uptime is 38 1/2 hours, again just ticking over. kernel: [43061450.240000] SMP kernel: [43061450.240000] Modules linked in: nls_utf8 ntfs ipv6 dm_mod af_packet md_mod lp snd_cmipci gameport snd_pcm_oss snd_mixer_oss snd_pcm snd_page_alloc snd_opl3_lib snd_timer snd_hwdep snd_mpu401_uart snd_rawmidi snd_seq_device snd jedec_probe cfi_probe i2c_amd756 gen_probe i2c_core soundcore parport_pc mtdcore chipreg map_funcs natsemi hw_random pcspkr psmouse parport floppy serio_raw amd_k7_agp shpchp pci_hotplug agpgart evdev reiserfs ide_generic ehci_hcd ohci_hcd usbcore ide_cd cdrom ide_disk generic amd74xx thermal processor fan fbcon tileblit font bitblit softcursor capability commoncap kernel: [43061450.240000] CPU: 1 kernel: [43061450.240000] EIP: 0060:[pg0+2512941/1069167616] Not tainted VLI kernel: [43061450.240000] EFLAGS: 00010286 (2.6.15-26-server) kernel: [43061450.240000] EIP is at 0xc06c082d kernel: [43061450.240000] eax: 00000000 ebx: c11a537c ecx: df893040 edx: c1a10060 kernel: [43061450.240000] esi: 00aa8f00 edi: 00228c01 ebp: c014d140 esp: c1b4bf70 kernel: [43061450.240000] ds: 007b es: 007b ss: 0068 kernel: [43061450.240000] Process watchdog/1 (pid: 7, threadinfo=c1b4a000 task=dffdb560) kernel: [43061450.240000] Stack: c1b4bf7c 008d4800 c1b21f34 00000000 00200200 00aa8f00 c012f360 dffdb560 kernel: [43061450.240000] c1a10ee0 c1b4a000 c1b21f34 c012f9b4 00000065 c1b4a000 c014d18f 000003e8 kernel: [43061450.240000] 00000001 c1b4bfb8 00000063 fffffffc c013b9d8 00000001 000000ff 00000000 kernel: [43061450.240000] Call Trace: kernel: [43061450.240000] [process_timeout+0/16] process_timeout+0x0/0x10 kernel: [43061450.240000] [msleep_interruptible+84/112] msleep_interruptible+0x54/0x70 kernel: [43061450.240000] [watchdog+79/128] watchdog+0x4f/0x80 kernel: [43061450.240000] [kthread+200/208] kthread+0xc8/0xd0 kernel: [43061450.240000] [kthread+0/208] kthread+0x0/0xd0 kernel: [43061450.240000] [kernel_thread_helper+5/16] kernel_thread_helper+0x5/0x10 kernel: [43061450.240000] Code: d5 48 fe 45 fd ed 7f f0 05 47 f4 ca 96 37 c9 76 2a 73 dc 97 0b 86 14 9e fb 96 a7 29 5f 2b 5f 59 8f a9 f6 af f5 4b 20 f6 0f 78 ee fe fc 14 bc 49 f7 bd ac d6 3a ec c4 35 19 38 8f a3 ec 2e c1 kernel: [43061450.250000] <3>BUG: soft lockup detected on CPU#1! kernel: [43061468.310000] kernel: [43061468.310000] Pid: 0, comm: swapper kernel: [43061468.310000] EIP: 0060:[default_idle+44/96] CPU: 1 kernel: [43061468.310000] EIP is at default_idle+0x2c/0x60 kernel: [43061468.310000] EFLAGS: 00000246 Not tainted (2.6.15-26-server) kernel: [43061468.310000] EAX: 00000000 EBX: 01612f60 ECX: c0101030 EDX: df902000 kernel: [43061468.310000] ESI: 00000001 EDI: 00000000 EBP: 00000000 DS: 007b ES: 007b kernel: [43061468.310000] CR0: 8005003b CR2: b7fa1000 CR3: 3558f360 CR4: 000006b0 kernel: [43061468.310000] [cpu_idle+111/192] cpu_idle+0x6f/0xc0 ** Affects: linux-source-2.6.15 (Ubuntu) Importance: Undecided Status: Needs Info -- <3>BUG: soft lockup detected on CPU#1! https://launchpad.net/bugs/63165 From feenixx at hotmail.com Sat Sep 30 21:45:26 2006 From: feenixx at hotmail.com (mlind) Date: Sat, 30 Sep 2006 21:45:26 -0000 Subject: [Bug 63165] Re: <3>BUG: soft lockup detected on CPU#1! References: <20060930124119.3663.69076.malonedeb@gandwana.ubuntu.com> Message-ID: <20060930214526.3619.75491.malone@gandwana.ubuntu.com> Could you provide the output of $ uname -r Thanks. ** Changed in: Ubuntu Status: Unconfirmed => Needs Info ** Changed in: Ubuntu Sourcepackagename: None => linux-source-2.6.15 -- <3>BUG: soft lockup detected on CPU#1! https://launchpad.net/bugs/63165 From larkin8 at hotmail.com Sat Sep 30 21:51:11 2006 From: larkin8 at hotmail.com (lark) Date: Sat, 30 Sep 2006 21:51:11 -0000 Subject: [Bug 57502] Re: JMicron PATA/SATA Controller does not work References: <20060823192235.13463.13121.malonedeb@gandwana.ubuntu.com> Message-ID: <20060930215111.2244.89149.malone@gangotri.ubuntu.com> the 20060928 daily alternate image works with GIGABYTE GA-965P-DS3 with cdrom attached to ide and sata drive attached to jmicron (purple connector). drives attached to ich8 are not recognized. also jmicron sata must be set to ahci in the bios. -- JMicron PATA/SATA Controller does not work https://launchpad.net/bugs/57502