[Bug 182716] Re: bcm4306 doesn't work with b43 / ssb
Zack Cornelius
zcorneli at iit.edu
Sun Mar 23 05:28:57 UTC 2008
Ok, so, another confirm, this time with a 4311 rev 2 (Worked fine under
bcm43xx, worked fine under older (2.6.24-5 and 2.6.24-8) kernels.
Card seems to drop connection every 20 minutes or so (actually
deassociates from Access point (despite being less than 15 feet away,
open air)). This reults in NetworkManager showing the card disconnected
(and really annoying me).
I installed the card with b43-fwcutter autoinstalling the firmware
ifconfig:
me at me-laptop:~$ ifconfig
eth0 Link encap:Ethernet HWaddr 00:1b:38:8b:80:be
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
Interrupt:21 Base address:0x1000
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:35617 errors:0 dropped:0 overruns:0 frame:0
TX packets:35617 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:1781596 (1.6 MB) TX bytes:1781596 (1.6 MB)
wlan0 Link encap:Ethernet HWaddr 00:1a:73:b0:8b:1b
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:128413 errors:0 dropped:0 overruns:0 frame:0
TX packets:65880 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:142615884 (136.0 MB) TX bytes:6819396 (6.5 MB)
wmaster0 Link encap:UNSPEC HWaddr 00-1A-73-B0-8B-1B-00-00-00-00-00-00-00-00-00-00
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
iwconfig:
me at me-laptop:~$ iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
wmaster0 no wireless extensions.
wlan0 IEEE 802.11g ESSID:"home"
Mode:Managed Frequency:2.437 GHz Access Point: 00:0C:E5:51:90:1A
Bit Rate=1 Mb/s Tx-Power=27 dBm
Retry min limit:7 RTS thr:off Fragment thr=2346 B
Link Quality=71/100 Signal level=-61 dBm Noise level=-73 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
I'll get a dmesg up soon, but includes quite a few lines (1800), many
including reassociate and deassociate(reason 3).
--
bcm4306 doesn't work with b43 / ssb
https://bugs.launchpad.net/bugs/182716
You received this bug notification because you are a member of Kernel
Bugs, which is subscribed to Linux.
More information about the kernel-bugs
mailing list