[Bug 44191] Re: Pinnacle PCTV Stereo (saa7134) Cards don't work in Dapper (only one channel can be reached).

[Stan Behrens]

Same problem ... 2.6.24 did the Job just fine.

# uname -a
Linux desktop 2.6.27.3 #1 Sat Oct 25 23:22:03 CEST 2008 i686 AMD Athlon(tm) XP 2000+ AuthenticAMD GNU/Linux
# dmesg
 ...
[    0.199442] Linux video capture interface: v2.00
[    0.199660] saa7130/34: v4l2 driver version 0.2.14 loaded
[    0.199773] saa7134 0000:00:0b.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[    0.199850] saa7134[0]: found at 0000:00:0b.0, rev: 1, irq: 19, latency: 32, mmio: 0xdffffc00
[    0.199935] saa7134[0]: subsystem: 1131:fe01, board: KNC One TV-Station RDS / Typhoon TV Tuner RDS [card=7,autodetected]
[    0.200108] saa7134[0]: board init: gpio is 10220
[    0.310349] TUNER: Unable to find symbol tda829x_probe()
[    0.310419] tuner' 0-0043: chip found @ 0x86 (saa7134[0])
[    0.310650] DVB: Unable to find symbol tda9887_attach()
[    0.316811] TUNER: Unable to find symbol tea5767_autodetection()
[    0.316882] tuner' 0-0060: chip found @ 0xc0 (saa7134[0])
[    0.366649] saa7134[0]: i2c eeprom 00: 31 11 01 fe 00 00 00 00 00 00 00 00 00 00 00 01
[    0.367582] saa7134[0]: i2c eeprom 10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[    0.368514] saa7134[0]: i2c eeprom 20: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[    0.369446] saa7134[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[    0.370382] saa7134[0]: i2c eeprom 40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[    0.371313] saa7134[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[    0.372245] saa7134[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[    0.373176] saa7134[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[    0.374112] saa7134[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[    0.375043] saa7134[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[    0.375975] saa7134[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[    0.376910] saa7134[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[    0.377841] saa7134[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[    0.378773] saa7134[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[    0.379704] saa7134[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[    0.380639] saa7134[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[    0.381769] DVB: Unable to find symbol simple_tuner_attach()
[    0.381847] tuner' 0-0060: Tuner has no way to set tv freq
[    0.381918] tuner' 0-0060: Tuner has no way to set tv freq
[    0.382319] saa7134[0]: registered device video0 [v4l2]
[    0.382453] saa7134[0]: registered device vbi0
[    0.382584] saa7134[0]: registered device radio0
 ...

-- 
Pinnacle PCTV Stereo (saa7134) Cards don't work in Dapper (only one channel can be reached).
https://bugs.launchpad.net/bugs/44191
You received this bug notification because you are a member of Kernel
Bugs, which is a direct subscriber.