[Bug 329277] Re: ieee1394 port not recognized
darkblue_b
maplabs at light42.com
Fri Feb 27 19:23:26 UTC 2009
jaunty a5 listings
have not tested the port yet.. tips welcome
===================================
ubuntu at ubuntu:~$ dmesg
[ 0.000000] BIOS EBDA/lowmem at: 0009f000/0009f000
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.28-8-generic (buildd at yellow) (gcc
version 4.3.3 (Ubuntu 4.3.3-3ubuntu5) ) #26-Ubuntu SMP Wed Feb 25
04:27:53 UTC 2009 (Ubuntu 2.6.28-8.26-generic)
[ 0.000000] Command line: BOOT_IMAGE=/casper/vmlinuz
file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.gz
quiet splash --
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
[ 0.000000] BIOS-e820: 000000000009f400 - 00000000000a0000
(reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000
(reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000cfff0000 (usable)
[ 0.000000] BIOS-e820: 00000000cfff0000 - 00000000cfff3000 (ACPI
NVS)
[ 0.000000] BIOS-e820: 00000000cfff3000 - 00000000d0000000 (ACPI
data)
[ 0.000000] BIOS-e820: 00000000d0000000 - 00000000e0000000
(reserved)
[ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000
(reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000
(reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000120000000 (usable)
[ 0.000000] DMI 2.3 present.
[ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working
it around.
[ 0.000000] last_pfn = 0x120000 max_arch_pfn = 0x3ffffffff
[ 0.000000] last_pfn = 0xcfff0 max_arch_pfn = 0x3ffffffff
[ 0.000000] Scanning 0 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved)
[ 0.000000] modified: 0000000000010000 - 000000000009f400 (usable)
[ 0.000000] modified: 000000000009f400 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 00000000cfff0000 (usable)
[ 0.000000] modified: 00000000cfff0000 - 00000000cfff3000 (ACPI NVS)
[ 0.000000] modified: 00000000cfff3000 - 00000000d0000000 (ACPI
data)
[ 0.000000] modified: 00000000d0000000 - 00000000e0000000 (reserved)
[ 0.000000] modified: 00000000f0000000 - 00000000f4000000 (reserved)
[ 0.000000] modified: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] modified: 0000000100000000 - 0000000120000000 (usable)
[ 0.000000] init_memory_mapping: 0000000000000000-00000000cfff0000
[ 0.000000] 0000000000 - 00cfe00000 page 2M
[ 0.000000] 00cfe00000 - 00cfff0000 page 4k
[ 0.000000] kernel direct mapping tables up to cfff0000 @ 10000-16000
[ 0.000000] last_map_addr: cfff0000 end: cfff0000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000120000000
[ 0.000000] 0100000000 - 0120000000 page 2M
[ 0.000000] kernel direct mapping tables up to 120000000 @
14000-1a000
[ 0.000000] last_map_addr: 120000000 end: 120000000
[ 0.000000] RAMDISK: 7f81c000 - 7ffff0c4
[ 0.000000] ACPI: RSDP 000F8370, 0014 (r0 ACRSYS)
[ 0.000000] ACPI: RSDT CFFF3040, 003C (r1 ACRSYS ACRPRDCT 42302E31
AWRD 0)
[ 0.000000] ACPI: FACP CFFF30C0, 0074 (r1 ACRSYS ACRPRDCT 42302E31
AWRD 0)
[ 0.000000] ACPI: DSDT CFFF3180, 631A (r1 ACRSYS AWRDACPI 1000
MSFT 100000E)
[ 0.000000] ACPI: FACS CFFF0000, 0040
[ 0.000000] ACPI: SSDT CFFF95C0, 0248 (r1 PTLTD POWERNOW 1
LTP 1)
[ 0.000000] ACPI: HPET CFFF9880, 0038 (r1 ACRSYS ACRPRDCT 42302E31
AWRD 98)
[ 0.000000] ACPI: SLIC CFFF9900, 0176 (r1 ACRSYS ACRPRDCT 42302E31
AWRD 1)
[ 0.000000] ACPI: MCFG CFFF9AC0, 003C (r1 ACRSYS ACRPRDCT 42302E31
AWRD 0)
[ 0.000000] ACPI: APIC CFFF9500, 007C (r1 ACRSYS ACRPRDCT 42302E31
AWRD 0)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] (7 early reservations) ==> bootmem [0000000000 -
0120000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==>
[0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==>
[0000006000 - 0000008000]
[ 0.000000] #2 [0000200000 - 0000b663b0] TEXT DATA BSS ==>
[0000200000 - 0000b663b0]
[ 0.000000] #3 [007f81c000 - 007ffff0c4] RAMDISK ==>
[007f81c000 - 007ffff0c4]
[ 0.000000] #4 [000009f000 - 0000100000] BIOS reserved ==>
[000009f000 - 0000100000]
[ 0.000000] #5 [0000010000 - 0000014000] PGTABLE ==>
[0000010000 - 0000014000]
[ 0.000000] #6 [0000014000 - 0000015000] PGTABLE ==>
[0000014000 - 0000015000]
[ 0.000000] found SMP MP-table at [ffff8800000f3c90] 000f3c90
[ 0.000000] [ffffe20000000000-ffffe20003ffffff] PMD ->
[ffff880028200000-ffff88002c1fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00120000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000cfff0
[ 0.000000] 0: 0x00100000 -> 0x00120000
[ 0.000000] On node 0 totalpages: 982911
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 2513 pages reserved
[ 0.000000] DMA zone: 1414 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 833576 pages, LIFO batch:31
[ 0.000000] Normal zone: 1792 pages used for memmap
[ 0.000000] Normal zone: 129280 pages, LIFO batch:31
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] Detected use of extended apic ids on hypertransport bus
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI
0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high
level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high
edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high
edge)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ14 used by override.
[ 0.000000] ACPI: IRQ15 used by override.
[ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfeff0000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: 000000000009f000 -
00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 -
00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 -
0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000cfff0000 -
00000000cfff3000
[ 0.000000] PM: Registered nosave memory: 00000000cfff3000 -
00000000d0000000
[ 0.000000] PM: Registered nosave memory: 00000000d0000000 -
00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 -
00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 -
00000000f4000000
[ 0.000000] PM: Registered nosave memory: 00000000f4000000 -
00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 -
0000000100000000
[ 0.000000] Allocating PCI resources starting at e1000000 (gap:
e0000000:10000000)
[ 0.000000] PERCPU: Allocating 69632 bytes of per cpu data
[ 0.000000] NR_CPUS: 64, nr_cpu_ids: 2, nr_node_ids 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on.
Total pages: 964270
[ 0.000000] Kernel command line: BOOT_IMAGE=/casper/vmlinuz
file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.gz
quiet splash --
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2310.624 MHz processor.
[ 0.004000] spurious 8259A interrupt: IRQ7.
[ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] console [tty0] enabled
[ 0.004000] Dentry cache hash table entries: 524288 (order: 10,
4194304 bytes)
[ 0.004000] Inode-cache hash table entries: 262144 (order: 9,
2097152 bytes)
[ 0.004000] allocated 47185920 bytes of page_cgroup
[ 0.004000] please try cgroup_disable=memory option if you don't want
[ 0.004000] Scanning for low memory corruption every 60 seconds
[ 0.004000] Checking aperture...
[ 0.004000] No AGP bridge found
[ 0.004000] Node 0: aperture @ dd6a000000 size 32 MB
[ 0.004000] Aperture beyond 4GB. Ignoring.
[ 0.004000] Your BIOS doesn't leave a aperture memory hole
[ 0.004000] Please enable the IOMMU option in the BIOS setup
[ 0.004000] This costs you 64 MB of RAM
[ 0.004000] Mapping aperture over 65536 KB of RAM @ 20000000
[ 0.004000] PM: Registered nosave memory: 0000000020000000 -
0000000024000000
[ 0.004000] Memory: 3729392k/4718592k available (4660k kernel code,
786948k absent, 201360k reserved, 2523k data, 532k init)
[ 0.004000] SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0,
CPUs=2, Nodes=1
[ 0.004000] hpet clockevent registered
[ 0.004000] HPET: 3 timers in total, 0 timers will be used for
per-cpu timer
[ 0.004000] Calibrating delay loop (skipped), value calculated using
timer frequency.. 4621.24 BogoMIPS (lpj=9242496)
[ 0.004000] Security Framework initialized
[ 0.004000] SELinux: Disabled at boot.
[ 0.004000] AppArmor: AppArmor initialized
[ 0.004000] Mount-cache hash table entries: 256
[ 0.004000] Initializing cgroup subsys ns
[ 0.004000] Initializing cgroup subsys cpuacct
[ 0.004000] Initializing cgroup subsys memory
[ 0.004000] Initializing cgroup subsys freezer
[ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64
bytes/line)
[ 0.004000] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.004000] tseg: 0000000000
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 0
[ 0.004000] using C1E aware idle routine
[ 0.004000] ACPI: Core revision 20080926
[ 0.004230] ACPI: Checking initramfs for custom DSDT
[ 0.279603] Setting APIC routing to flat
[ 0.280161] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.319855] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 4400+
stepping 01
[ 0.320001] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.004000] Initializing CPU#1
[ 0.004000] Calibrating delay using timer specific routine.. 4620.69
BogoMIPS (lpj=9241386)
[ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64
bytes/line)
[ 0.004000] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 1
[ 0.404151] CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 4400+
stepping 01
[ 0.404180] Brought up 2 CPUs
[ 0.404181] Total of 2 processors activated (9241.94 BogoMIPS).
[ 0.404266] CPU0 attaching sched-domain:
[ 0.404268] domain 0: span 0-1 level CPU
[ 0.404270] groups: 0 1
[ 0.404276] CPU1 attaching sched-domain:
[ 0.404277] domain 0: span 0-1 level CPU
[ 0.404278] groups: 1 0
[ 0.404337] net_namespace: 1400 bytes
[ 0.404337] Booting paravirtualized kernel on bare hardware
[ 0.404337] Time: 18:15:50 Date: 02/27/09
[ 0.404337] regulator: core version 0.5
[ 0.404337] NET: Registered protocol family 16
[ 0.404337] node 0 link 0: io port [8000, ffff]
[ 0.404337] TOM: 00000000e0000000 aka 3584M
[ 0.404337] node 0 link 0: mmio [a0000, bffff]
[ 0.404337] node 0 link 0: mmio [e0000000, efffffff]
[ 0.404337] node 0 link 0: mmio [f4000000, fe02ffff]
[ 0.404337] node 0 link 0: mmio [f0000000, f03fffff]
[ 0.404337] TOM2: 0000000120000000 aka 4608M
[ 0.404337] bus: [00,04] on node 0 link 0
[ 0.404337] bus: 00 index 0 io port: [0, ffff]
[ 0.404337] bus: 00 index 1 mmio: [a0000, bffff]
[ 0.404337] bus: 00 index 2 mmio: [e0000000, f3ffffff]
[ 0.404337] bus: 00 index 3 mmio: [f4000000, ffffffff]
[ 0.404337] bus: 00 index 4 mmio: [120000000, fcffffffff]
[ 0.404337] ACPI: bus type pci registered
[ 0.404337] PCI: MCFG configuration 0: base f0000000 segment 0 buses
0 - 63
[ 0.404337] PCI: MCFG area at f0000000 reserved in E820
[ 0.408554] PCI: Using MMCONFIG at f0000000 - f3ffffff
[ 0.408556] PCI: Using configuration type 1 for base access
[ 0.412545] ACPI: EC: Look up EC in DSDT
[ 0.420602] ACPI: Interpreter enabled
[ 0.420605] ACPI: (supports S0 S3 S4 S5)
[ 0.420623] ACPI: Using IOAPIC for interrupt routing
[ 0.428689] ACPI: No dock devices found.
[ 0.428689] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.428689] pci 0000:00:01.1: reg 10 io port: [0xfc00-0xfc3f]
[ 0.428689] pci 0000:00:01.1: reg 20 io port: [0x1c00-0x1c3f]
[ 0.428689] pci 0000:00:01.1: reg 24 io port: [0xf400-0xf43f]
[ 0.428689] pci 0000:00:01.1: PME# supported from D3hot D3cold
[ 0.428689] pci 0000:00:01.1: PME# disabled
[ 0.428689] pci 0000:00:02.0: reg 10 32bit mmio:
[0xfe02f000-0xfe02ffff]
[ 0.428689] pci 0000:00:02.0: supports D1 D2
[ 0.428689] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot
D3cold
[ 0.428689] pci 0000:00:02.0: PME# disabled
[ 0.428689] pci 0000:00:02.1: reg 10 32bit mmio:
[0xfe02e000-0xfe02e0ff]
[ 0.428689] pci 0000:00:02.1: supports D1 D2
[ 0.428689] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot
D3cold
[ 0.428689] pci 0000:00:02.1: PME# disabled
[ 0.432039] pci 0000:00:05.0: reg 10 32bit mmio:
[0xfe028000-0xfe02bfff]
[ 0.432055] pci 0000:00:05.0: PME# supported from D3hot D3cold
[ 0.432057] pci 0000:00:05.0: PME# disabled
[ 0.432090] pci 0000:00:06.0: reg 20 io port: [0xf000-0xf00f]
[ 0.432114] pci 0000:00:08.0: reg 10 io port: [0x9f0-0x9f7]
[ 0.432117] pci 0000:00:08.0: reg 14 io port: [0xbf0-0xbf3]
[ 0.432120] pci 0000:00:08.0: reg 18 io port: [0x970-0x977]
[ 0.432123] pci 0000:00:08.0: reg 1c io port: [0xb70-0xb73]
[ 0.432126] pci 0000:00:08.0: reg 20 io port: [0xdc00-0xdc0f]
[ 0.432129] pci 0000:00:08.0: reg 24 32bit mmio:
[0xfe02d000-0xfe02dfff]
[ 0.432151] pci 0000:00:08.1: reg 10 io port: [0x9e0-0x9e7]
[ 0.432154] pci 0000:00:08.1: reg 14 io port: [0xbe0-0xbe3]
[ 0.432157] pci 0000:00:08.1: reg 18 io port: [0x960-0x967]
[ 0.432160] pci 0000:00:08.1: reg 1c io port: [0xb60-0xb63]
[ 0.432162] pci 0000:00:08.1: reg 20 io port: [0xc800-0xc80f]
[ 0.432165] pci 0000:00:08.1: reg 24 32bit mmio:
[0xfe02c000-0xfe02cfff]
[ 0.432195] pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot
D3cold
[ 0.432197] pci 0000:00:09.0: PME# disabled
[ 0.432218] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot
D3cold
[ 0.432220] pci 0000:00:0b.0: PME# disabled
[ 0.432240] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot
D3cold
[ 0.432242] pci 0000:00:0c.0: PME# disabled
[ 0.432257] pci 0000:00:0d.0: reg 10 32bit mmio:
[0xfb000000-0xfbffffff]
[ 0.432261] pci 0000:00:0d.0: reg 14 64bit mmio:
[0xe0000000-0xefffffff]
[ 0.432265] pci 0000:00:0d.0: reg 1c 64bit mmio:
[0xfc000000-0xfcffffff]
[ 0.432269] pci 0000:00:0d.0: reg 30 32bit mmio: [0x000000-0x01ffff]
[ 0.432376] pci 0000:01:09.0: reg 10 32bit mmio:
[0xfdfff000-0xfdfff7ff]
[ 0.432381] pci 0000:01:09.0: reg 14 32bit mmio:
[0xfdff8000-0xfdffbfff]
[ 0.432404] pci 0000:01:09.0: supports D1 D2
[ 0.432405] pci 0000:01:09.0: PME# supported from D0 D1 D2 D3hot
[ 0.432408] pci 0000:01:09.0: PME# disabled
[ 0.432431] pci 0000:00:04.0: transparent bridge
[ 0.432434] pci 0000:00:04.0: bridge io port: [0xb000-0xbfff]
[ 0.432436] pci 0000:00:04.0: bridge 32bit mmio:
[0xfdf00000-0xfdffffff]
[ 0.432439] pci 0000:00:04.0: bridge 32bit mmio pref:
[0xfd800000-0xfd8fffff]
[ 0.432471] pci 0000:00:09.0: bridge io port: [0xa000-0xafff]
[ 0.432473] pci 0000:00:09.0: bridge 32bit mmio:
[0xfde00000-0xfdefffff]
[ 0.432476] pci 0000:00:09.0: bridge 64bit mmio pref:
[0xfdd00000-0xfddfffff]
[ 0.432511] pci 0000:03:00.0: reg 10 64bit mmio:
[0xfdcfc000-0xfdcfffff]
[ 0.432517] pci 0000:03:00.0: reg 18 io port: [0x9c00-0x9cff]
[ 0.432532] pci 0000:03:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]
[ 0.432539] pci 0000:03:00.0: supports D1 D2
[ 0.432541] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot
D3cold
[ 0.432544] pci 0000:03:00.0: PME# disabled
[ 0.432578] pci 0000:00:0b.0: bridge io port: [0x9000-0x9fff]
[ 0.432580] pci 0000:00:0b.0: bridge 32bit mmio:
[0xfdc00000-0xfdcfffff]
[ 0.432583] pci 0000:00:0b.0: bridge 64bit mmio pref:
[0xfdb00000-0xfdbfffff]
[ 0.432614] pci 0000:00:0c.0: bridge io port: [0x8000-0x8fff]
[ 0.432616] pci 0000:00:0c.0: bridge 32bit mmio:
[0xfda00000-0xfdafffff]
[ 0.432619] pci 0000:00:0c.0: bridge 64bit mmio pref:
[0xfd900000-0xfd9fffff]
[ 0.432626] bus 00 -> node 0
[ 0.432634] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.432929] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[ 0.505574] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15)
*0, disabled.
[ 0.505574] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15)
*0, disabled.
[ 0.505574] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15)
*0, disabled.
[ 0.505574] ACPI: PCI Interrupt Link [LNK4] (IRQs *5 7 9 10 11 14 15)
[ 0.505574] ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15)
*0, disabled.
[ 0.505574] ACPI: PCI Interrupt Link [LNK6] (IRQs *5 7 9 10 11 14 15)
[ 0.505574] ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15)
*0, disabled.
[ 0.505574] ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15)
*0, disabled.
[ 0.505575] ACPI: PCI Interrupt Link [LIGP] (IRQs 5 7 9 10 *11 14 15)
[ 0.505750] ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15)
*0, disabled.
[ 0.505927] ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 *10 11 14 15)
[ 0.506102] ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 10 11 14 15)
*0, disabled.
[ 0.508129] ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 *10 11 14 15)
[ 0.508305] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15)
*0, disabled.
[ 0.508482] ACPI: PCI Interrupt Link [LSMB] (IRQs *5 7 9 10 11 14 15)
[ 0.508659] ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 10 *11 14 15)
[ 0.508835] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15)
*0, disabled.
[ 0.509012] ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 *10 11 14 15)
[ 0.509189] ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 10 *11 14 15)
[ 0.509412] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
[ 0.509626] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
[ 0.509839] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
[ 0.510052] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0
[ 0.510265] ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled.
[ 0.510477] ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0
[ 0.510690] ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled.
[ 0.510902] ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled.
[ 0.511115] ACPI: PCI Interrupt Link [AIGP] (IRQs 20 21 22 23) *0
[ 0.511329] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0
[ 0.511542] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0,
disabled.
[ 0.511757] ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0,
disabled.
[ 0.511972] ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0
[ 0.512193] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0
[ 0.512412] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0
[ 0.512626] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0,
disabled.
[ 0.512840] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0,
disabled.
[ 0.513054] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
[ 0.513268] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0
[ 0.513328] ACPI: WMI: Mapper loaded
[ 0.513328] SCSI subsystem initialized
[ 0.513328] libata version 3.00 loaded.
[ 0.513328] usbcore: registered new interface driver usbfs
[ 0.513328] usbcore: registered new interface driver hub
[ 0.513328] usbcore: registered new device driver usb
[ 0.513328] PCI: Using ACPI for IRQ routing
[ 0.528009] Bluetooth: Core ver 2.13
[ 0.528049] NET: Registered protocol family 31
[ 0.528050] Bluetooth: HCI device and connection manager initialized
[ 0.528053] Bluetooth: HCI socket layer initialized
[ 0.528055] NET: Registered protocol family 8
[ 0.528056] NET: Registered protocol family 20
[ 0.528070] NetLabel: Initializing
[ 0.528070] NetLabel: domain hash size = 128
[ 0.528070] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.528070] NetLabel: unlabeled traffic allowed by default
[ 0.528093] PCI-DMA: Disabling AGP.
[ 0.528180] PCI-DMA: aperture base @ 20000000 size 65536 KB
[ 0.528180] PCI-DMA: using GART IOMMU.
[ 0.528180] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 0.528620] hpet0: at MMIO 0xfeff0000, IRQs 2, 8, 31
[ 0.528627] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
[ 0.532088] AppArmor: AppArmor Filesystem Enabled
[ 0.536013] Switched to high resolution mode on CPU 0
[ 0.536194] Switched to high resolution mode on CPU 1
[ 0.548018] pnp: PnP ACPI init
[ 0.548038] ACPI: bus type pnp registered
[ 0.555060] pnp: PnP ACPI: found 13 devices
[ 0.555062] ACPI: ACPI bus type pnp unregistered
[ 0.555073] system 00:01: ioport range 0x1000-0x107f has been
reserved
[ 0.555076] system 00:01: ioport range 0x1080-0x10ff has been
reserved
[ 0.555078] system 00:01: ioport range 0x1400-0x147f has been
reserved
[ 0.555080] system 00:01: ioport range 0x1480-0x14ff has been
reserved
[ 0.555082] system 00:01: ioport range 0x1800-0x187f has been
reserved
[ 0.555084] system 00:01: ioport range 0x1880-0x18ff has been
reserved
[ 0.555087] system 00:01: iomem range 0xfefe0000-0xfefe01ff has been
reserved
[ 0.555090] system 00:01: iomem range 0xfefe1000-0xfefe10ff has been
reserved
[ 0.555092] system 00:01: iomem range 0xd0000000-0xdfffffff has been
reserved
[ 0.555097] system 00:02: ioport range 0x4d0-0x4d1 has been reserved
[ 0.555099] system 00:02: ioport range 0x800-0x87f has been reserved
[ 0.555101] system 00:02: ioport range 0x290-0x297 has been reserved
[ 0.555107] system 00:0b: iomem range 0xf0000000-0xf3ffffff has been
reserved
[ 0.555111] system 00:0c: iomem range 0xd0000-0xd3fff has been
reserved
[ 0.555114] system 00:0c: iomem range 0xf0000-0xf7fff could not be
reserved
[ 0.555116] system 00:0c: iomem range 0xf8000-0xfbfff could not be
reserved
[ 0.555118] system 00:0c: iomem range 0xfc000-0xfffff could not be
reserved
[ 0.555120] system 00:0c: iomem range 0xfeff0000-0xfeff00ff has been
reserved
[ 0.555123] system 00:0c: iomem range 0xcfff0000-0xcfffffff could
not be reserved
[ 0.555125] system 00:0c: iomem range 0xffff0000-0xffffffff has been
reserved
[ 0.555127] system 00:0c: iomem range 0x0-0x9ffff could not be
reserved
[ 0.555129] system 00:0c: iomem range 0x100000-0xcffeffff could not
be reserved
[ 0.555131] system 00:0c: iomem range 0xd0000000-0xdfffffff has been
reserved
[ 0.555134] system 00:0c: iomem range 0xfec00000-0xfec00fff has been
reserved
[ 0.555136] system 00:0c: iomem range 0xfee00000-0xfeefffff has been
reserved
[ 0.555138] system 00:0c: iomem range 0xfefff000-0xfeffffff has been
reserved
[ 0.555141] system 00:0c: iomem range 0xfff80000-0xfff80fff has been
reserved
[ 0.555143] system 00:0c: iomem range 0xfff90000-0xfffbffff has been
reserved
[ 0.555145] system 00:0c: iomem range 0xfffed000-0xfffeffff has been
reserved
[ 0.560324] pci 0000:00:04.0: PCI bridge, secondary bus 0000:01
[ 0.560326] pci 0000:00:04.0: IO window: 0xb000-0xbfff
[ 0.560330] pci 0000:00:04.0: MEM window: 0xfdf00000-0xfdffffff
[ 0.560333] pci 0000:00:04.0: PREFETCH window:
0x000000fd800000-0x000000fd8fffff
[ 0.560336] pci 0000:00:09.0: PCI bridge, secondary bus 0000:02
[ 0.560338] pci 0000:00:09.0: IO window: 0xa000-0xafff
[ 0.560341] pci 0000:00:09.0: MEM window: 0xfde00000-0xfdefffff
[ 0.560343] pci 0000:00:09.0: PREFETCH window:
0x000000fdd00000-0x000000fddfffff
[ 0.560346] pci 0000:00:0b.0: PCI bridge, secondary bus 0000:03
[ 0.560348] pci 0000:00:0b.0: IO window: 0x9000-0x9fff
[ 0.560350] pci 0000:00:0b.0: MEM window: 0xfdc00000-0xfdcfffff
[ 0.560353] pci 0000:00:0b.0: PREFETCH window:
0x000000fdb00000-0x000000fdbfffff
[ 0.560355] pci 0000:00:0c.0: PCI bridge, secondary bus 0000:04
[ 0.560357] pci 0000:00:0c.0: IO window: 0x8000-0x8fff
[ 0.560360] pci 0000:00:0c.0: MEM window: 0xfda00000-0xfdafffff
[ 0.560362] pci 0000:00:0c.0: PREFETCH window:
0x000000fd900000-0x000000fd9fffff
[ 0.560370] pci 0000:00:04.0: setting latency timer to 64
[ 0.560374] pci 0000:00:09.0: setting latency timer to 64
[ 0.560377] pci 0000:00:0b.0: setting latency timer to 64
[ 0.560381] pci 0000:00:0c.0: setting latency timer to 64
[ 0.560384] bus: 00 index 0 io port: [0x00-0xffff]
[ 0.560385] bus: 00 index 1 mmio: [0x000000-0xffffffffffffffff]
[ 0.560387] bus: 01 index 0 io port: [0xb000-0xbfff]
[ 0.560389] bus: 01 index 1 mmio: [0xfdf00000-0xfdffffff]
[ 0.560390] bus: 01 index 2 mmio: [0xfd800000-0xfd8fffff]
[ 0.560392] bus: 01 index 3 io port: [0x00-0xffff]
[ 0.560393] bus: 01 index 4 mmio: [0x000000-0xffffffffffffffff]
[ 0.560395] bus: 02 index 0 io port: [0xa000-0xafff]
[ 0.560397] bus: 02 index 1 mmio: [0xfde00000-0xfdefffff]
[ 0.560398] bus: 02 index 2 mmio: [0xfdd00000-0xfddfffff]
[ 0.560400] bus: 02 index 3 mmio: [0x0-0x0]
[ 0.560401] bus: 03 index 0 io port: [0x9000-0x9fff]
[ 0.560402] bus: 03 index 1 mmio: [0xfdc00000-0xfdcfffff]
[ 0.560404] bus: 03 index 2 mmio: [0xfdb00000-0xfdbfffff]
[ 0.560405] bus: 03 index 3 mmio: [0x0-0x0]
[ 0.560407] bus: 04 index 0 io port: [0x8000-0x8fff]
[ 0.560408] bus: 04 index 1 mmio: [0xfda00000-0xfdafffff]
[ 0.560410] bus: 04 index 2 mmio: [0xfd900000-0xfd9fffff]
[ 0.560411] bus: 04 index 3 mmio: [0x0-0x0]
[ 0.560425] NET: Registered protocol family 2
[ 0.600064] IP route cache hash table entries: 131072 (order: 8,
1048576 bytes)
[ 0.600809] TCP established hash table entries: 262144 (order: 10,
4194304 bytes)
[ 0.602885] TCP bind hash table entries: 65536 (order: 8, 1048576
bytes)
[ 0.603447] TCP: Hash tables configured (established 262144 bind
65536)
[ 0.603450] TCP reno registered
[ 0.612102] NET: Registered protocol family 1
[ 0.612222] checking if image is initramfs... it is
[ 1.172216] Freeing initrd memory: 8076k freed
[ 1.178030] audit: initializing netlink socket (disabled)
[ 1.178052] type=2000 audit(1235758551.176:1): initialized
[ 1.185215] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.187880] VFS: Disk quotas dquot_6.5.1
[ 1.187973] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.189044] msgmni has been set to 7301
[ 1.189268] alg: No test for stdrng (krng)
[ 1.189281] io scheduler noop registered
[ 1.189283] io scheduler anticipatory registered
[ 1.189285] io scheduler deadline registered
[ 1.189359] io scheduler cfq registered (default)
[ 1.189391] pci 0000:00:00.0: Enabling HT MSI Mapping
[ 1.205056] pci 0000:00:04.0: Enabling HT MSI Mapping
[ 1.205071] pci 0000:00:05.0: Enabling HT MSI Mapping
[ 1.205095] pci 0000:00:08.0: Enabling HT MSI Mapping
[ 1.205108] pci 0000:00:08.1: Enabling HT MSI Mapping
[ 1.205122] pci 0000:00:09.0: Enabling HT MSI Mapping
[ 1.205136] pci 0000:00:0b.0: Enabling HT MSI Mapping
[ 1.205150] pci 0000:00:0c.0: Enabling HT MSI Mapping
[ 1.205163] pci 0000:00:0d.0: Boot video device
[ 1.212526] pcieport-driver 0000:00:09.0: setting latency timer to 64
[ 1.212546] pcieport-driver 0000:00:09.0: found MSI capability
[ 1.212562] pcieport-driver 0000:00:09.0: irq 2303 for MSI/MSI-X
[ 1.212568] pci_express 0000:00:09.0:pcie00: allocate port service
[ 1.212616] pci_express 0000:00:09.0:pcie03: allocate port service
[ 1.212683] pcieport-driver 0000:00:0b.0: setting latency timer to 64
[ 1.212701] pcieport-driver 0000:00:0b.0: found MSI capability
[ 1.212712] pcieport-driver 0000:00:0b.0: irq 2302 for MSI/MSI-X
[ 1.212717] pci_express 0000:00:0b.0:pcie00: allocate port service
[ 1.212760] pci_express 0000:00:0b.0:pcie03: allocate port service
[ 1.212822] pcieport-driver 0000:00:0c.0: setting latency timer to 64
[ 1.212840] pcieport-driver 0000:00:0c.0: found MSI capability
[ 1.212850] pcieport-driver 0000:00:0c.0: irq 2301 for MSI/MSI-X
[ 1.212856] pci_express 0000:00:0c.0:pcie00: allocate port service
[ 1.212901] pci_express 0000:00:0c.0:pcie03: allocate port service
[ 1.213051] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.213092] pciehp: PCI Express Hot Plug Controller Driver version:
0.4
[ 1.213392] input: Power Button (FF) as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 1.213394] ACPI: Power Button (FF) [PWRF]
[ 1.213466] input: Power Button (CM) as
/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 1.213468] ACPI: Power Button (CM) [PWRB]
[ 1.213587] fan PNP0C0B:00: registered as cooling_device0
[ 1.213592] ACPI: Fan [FAN] (on)
[ 1.214064] processor ACPI_CPU:00: registered as cooling_device1
[ 1.214126] processor ACPI_CPU:01: registered as cooling_device2
[ 1.218968] thermal LNXTHERM:01: registered as thermal_zone0
[ 1.219407] ACPI: Thermal Zone [THRM] (40 C)
[ 1.249441] Linux agpgart interface v0.103
[ 1.249446] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[ 1.249569] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.249687] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 1.250098] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.250274] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 1.252090] brd: module loaded
[ 1.252917] loop: module loaded
[ 1.253195] Fixed MDIO Bus: probed
[ 1.253201] PPP generic driver version 2.4.2
[ 1.253359] input: Macintosh mouse button emulation as
/devices/virtual/input/input2
[ 1.253439] Driver 'sd' needs updating - please use bus_type methods
[ 1.253480] Driver 'sr' needs updating - please use bus_type methods
[ 1.254100] sata_nv 0000:00:08.0: version 3.5
[ 1.254500] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23
[ 1.254512] sata_nv 0000:00:08.0: PCI INT A -> Link[APSI] -> GSI 23
(level, low) -> IRQ 23
[ 1.254577] sata_nv 0000:00:08.0: setting latency timer to 64
[ 1.254658] scsi0 : sata_nv
[ 1.254836] scsi1 : sata_nv
[ 1.255044] ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xdc00
irq 23
[ 1.255046] ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xdc08
irq 23
[ 1.720036] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.744286] ata1.00: ATA-7: Hitachi HDT725032VLA380, V54OA52A, max
UDMA/133
[ 1.744288] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth
0/32)
[ 1.760280] ata1.00: configured for UDMA/133
[ 2.228037] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.244914] ata2.00: ATA-8: WDC WD5000AAJS-22A8B0, 01.03B01, max
UDMA/133
[ 2.244916] ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth
0/32)
[ 2.260827] ata2.00: configured for UDMA/133
[ 2.260930] scsi 0:0:0:0: Direct-Access ATA Hitachi
HDT72503 V54O PQ: 0 ANSI: 5
[ 2.261127] sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors:
(320 GB/298 GiB)
[ 2.261142] sd 0:0:0:0: [sda] Write Protect is off
[ 2.261144] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.261164] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 2.261233] sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors:
(320 GB/298 GiB)
[ 2.261244] sd 0:0:0:0: [sda] Write Protect is off
[ 2.261246] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.261265] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 2.261268] sda: sda1 sda2
[ 2.298291] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.298415] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.298475] scsi 1:0:0:0: Direct-Access ATA WDC
WD5000AAJS-2 01.0 PQ: 0 ANSI: 5
[ 2.298651] sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors:
(500 GB/465 GiB)
[ 2.298664] sd 1:0:0:0: [sdb] Write Protect is off
[ 2.298666] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.298684] sd 1:0:0:0: [sdb] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 2.298726] sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors:
(500 GB/465 GiB)
[ 2.298736] sd 1:0:0:0: [sdb] Write Protect is off
[ 2.298738] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.298757] sd 1:0:0:0: [sdb] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 2.298760] sdb: sdb1
[ 2.307476] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 2.307576] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 2.307977] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 22
[ 2.307989] sata_nv 0000:00:08.1: PCI INT B -> Link[APSJ] -> GSI 22
(level, low) -> IRQ 22
[ 2.308042] sata_nv 0000:00:08.1: setting latency timer to 64
[ 2.308122] scsi2 : sata_nv
[ 2.308263] scsi3 : sata_nv
[ 2.308471] ata3: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xc800
irq 22
[ 2.308473] ata4: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xc808
irq 22
[ 2.932256] pata_amd 0000:00:06.0: version 0.3.10
[ 2.932292] pata_amd 0000:00:06.0: setting latency timer to 64
[ 2.932372] scsi4 : pata_amd
[ 2.932506] scsi5 : pata_amd
[ 2.933189] ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000
irq 14
[ 2.933191] ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008
irq 15
[ 3.096285] ata5.00: ATAPI: HL-DT-ST DVD-RW_GSA-H41N, RA00, max
UDMA/66
[ 3.096304] ata5: nv_mode_filter: 0x1f39f&0x1f01f->0x1f01f,
BIOS=0x1f000 (0xc5000000) ACPI=0x1f01f (30:600:0x13)
[ 3.112226] ata5.00: configured for UDMA/66
[ 3.114923] ata6: port disabled. ignoring.
[ 3.118619] scsi 4:0:0:0: CD-ROM HL-DT-ST DVD-RW_GSA-H41N
RA00 PQ: 0 ANSI: 5
[ 3.123415] sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda
tray
[ 3.123417] Uniform CD-ROM driver Revision: 3.20
[ 3.123595] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 3.123708] sr 4:0:0:0: Attached scsi generic sg2 type 5
[ 3.124999] usbcore: registered new interface driver libusual
[ 3.125095] usbcore: registered new interface driver usbserial
[ 3.125131] USB Serial support registered for generic
[ 3.125163] usbcore: registered new interface driver
usbserial_generic
[ 3.125165] usbserial: USB Serial Driver core
[ 3.125297] PNP: No PS/2 controller found. Probing ports directly.
[ 3.125695] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 3.125700] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 3.141123] mice: PS/2 mouse device common for all mice
[ 3.177135] rtc_cmos 00:05: RTC can wake from S4
[ 3.177224] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 3.177261] rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet
irqs
[ 3.177401] device-mapper: uevent: version 1.0.3
[ 3.177560] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23)
initialised: dm-devel at redhat.com
[ 3.177693] device-mapper: multipath: version 1.0.5 loaded
[ 3.177696] device-mapper: multipath round-robin: version 1.0.0
loaded
[ 3.177762] cpuidle: using governor ladder
[ 3.177764] cpuidle: using governor menu
[ 3.178200] TCP cubic registered
[ 3.178296] NET: Registered protocol family 10
[ 3.178629] lo: Disabled Privacy Extensions
[ 3.178864] NET: Registered protocol family 17
[ 3.178921] Bluetooth: L2CAP ver 2.11
[ 3.178923] Bluetooth: L2CAP socket layer initialized
[ 3.178925] Bluetooth: SCO (Voice Link) ver 0.6
[ 3.178927] Bluetooth: SCO socket layer initialized
[ 3.178966] Bluetooth: RFCOMM socket layer initialized
[ 3.178972] Bluetooth: RFCOMM TTY layer initialized
[ 3.178973] Bluetooth: RFCOMM ver 1.10
[ 3.179025] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core
Processor 4400+ processors (2 cpu cores) (version 2.20.00)
[ 3.179090] powernow-k8: 0 : fid 0xf (2300 MHz), vid 0xa
[ 3.179092] powernow-k8: 1 : fid 0xe (2200 MHz), vid 0xb
[ 3.179094] powernow-k8: 2 : fid 0xc (2000 MHz), vid 0xd
[ 3.179095] powernow-k8: 3 : fid 0xa (1800 MHz), vid 0xf
[ 3.179097] powernow-k8: 4 : fid 0x2 (1000 MHz), vid 0x12
[ 3.179432] registered taskstats version 1
[ 3.179567] Magic number: 13:632:292
[ 3.179596] tty tty25: hash matches
[ 3.179676] rtc_cmos 00:05: setting system clock to 2009-02-27
18:15:53 UTC (1235758553)
[ 3.179679] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 3.179680] EDD information not available.
[ 3.179718] Freeing unused kernel memory: 532k freed
[ 3.180044] Write protecting the kernel read-only data: 6592k
[ 3.332146] fuse init (API version 7.10)
[ 3.412187] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 3.412693] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 21
[ 3.412707] ohci_hcd 0000:00:02.0: PCI INT A -> Link[APCF] -> GSI 21
(level, low) -> IRQ 21
[ 3.412741] ohci_hcd 0000:00:02.0: setting latency timer to 64
[ 3.412744] ohci_hcd 0000:00:02.0: OHCI Host Controller
[ 3.412851] ohci_hcd 0000:00:02.0: new USB bus registered, assigned
bus number 1
[ 3.412894] ohci_hcd 0000:00:02.0: irq 21, io mem 0xfe02f000
[ 3.422131] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI)
Driver
[ 3.422135] Warning! ehci_hcd should always be loaded before
uhci_hcd and ohci_hcd, not after
[ 3.455900] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
[ 3.455915] ohci1394 0000:01:09.0: PCI INT A -> Link[APC4] -> GSI 19
(level, low) -> IRQ 19
[ 3.455921] ohci1394 0000:01:09.0: setting latency timer to 64
[ 3.508004] ohci1394: fw-host0: Get PHY Reg timeout
[0x00000000/0x00000000/100]
[ 3.605006] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19]
MMIO=[fdfff000-fdfff7ff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 3.608983] ohci1394: fw-host0: Get PHY Reg timeout
[0x00000000/0x00000000/100]
[ 3.706395] usb usb1: configuration #1 chosen from 1 choice
[ 3.706426] hub 1-0:1.0: USB hub found
[ 3.706444] hub 1-0:1.0: 10 ports detected
[ 3.707181] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 20
[ 3.707198] ehci_hcd 0000:00:02.1: PCI INT B -> Link[APCL] -> GSI 20
(level, low) -> IRQ 20
[ 3.707241] ehci_hcd 0000:00:02.1: setting latency timer to 64
[ 3.707244] ehci_hcd 0000:00:02.1: EHCI Host Controller
[ 3.707356] ehci_hcd 0000:00:02.1: new USB bus registered, assigned
bus number 2
[ 3.707414] ehci_hcd 0000:00:02.1: debug port 1
[ 3.707418] ehci_hcd 0000:00:02.1: cache line size of 64 is not
supported
[ 3.707446] ehci_hcd 0000:00:02.1: irq 20, io mem 0xfe02e000
[ 3.717132] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
[ 3.717350] usb usb2: configuration #1 chosen from 1 choice
[ 3.717458] hub 2-0:1.0: USB hub found
[ 3.717471] hub 2-0:1.0: 10 ports detected
[ 3.815515] sky2 driver version 1.22
[ 3.816068] ACPI: PCI Interrupt Link [APC6] enabled at IRQ 16
[ 3.816084] sky2 0000:03:00.0: PCI INT A -> Link[APC6] -> GSI 16
(level, low) -> IRQ 16
[ 3.816098] sky2 0000:03:00.0: setting latency timer to 64
[ 3.816152] sky2 0000:03:00.0: Yukon-2 EC Ultra chip revision 2
[ 3.847987] sky2 0000:03:00.0: Marvell Yukon 88E8056 Gigabit
Ethernet Controller
[ 3.847990] Part Number: Yukon 88E8056
[ 3.847991] Engineering Level: Rev. 1.2
[ 3.847993] Manufacturer: Marvell
[ 3.848034] sky2 0000:03:00.0: irq 2300 for MSI/MSI-X
[ 3.849686] sky2 eth0: addr 00:19:21:e5:cf:0e
[ 4.001025] Clocksource tsc unstable (delta = -109265990 ns)
[ 4.222176] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 4.229041] usb 2-10: new high speed USB device using ehci_hcd and
address 5
[ 4.277266] ISO 9660 Extensions: RRIP_1991A
[ 4.379165] usb 2-10: configuration #1 chosen from 1 choice
[ 4.386293] Initializing USB Mass Storage driver...
[ 4.386437] scsi6 : SCSI emulation for USB Mass Storage devices
[ 4.386542] usbcore: registered new interface driver usb-storage
[ 4.386545] USB Mass Storage support registered.
[ 4.386753] usb-storage: device found at 5
[ 4.386755] usb-storage: waiting for device to settle before scanning
[ 4.551632] aufs 20080922
[ 4.684025] usb 1-2: new low speed USB device using ohci_hcd and
address 2
[ 4.753548] ohci1394: fw-host0: Get PHY Reg timeout
[0x00000000/0x00000000/100]
[ 4.809107] squashfs: version 3.3 (2007/10/31) Phillip Lougher
[ 4.950402] usb 1-2: configuration #1 chosen from 1 choice
[ 4.964185] usbcore: registered new interface driver hiddev
[ 4.970780] input: Logitech USB-PS/2 Mouse M-BA47 as
/devices/pci0000:00/0000:00:02.0/usb1/1-2/1-2:1.0/input/input3
[ 4.997075] generic-usb 0003:046D:C002.0001: input,hidraw0: USB HID
v1.00 Mouse [Logitech USB-PS/2 Mouse M-BA47] on
usb-0000:00:02.0-2/input0
[ 4.997099] usbcore: registered new interface driver usbhid
[ 4.997103] usbhid: v2.6:USB HID core driver
[ 5.257026] usb 1-3: new low speed USB device using ohci_hcd and
address 3
[ 5.474136] usb 1-3: configuration #1 chosen from 1 choice
[ 5.485725] input: CHICONY HP Basic USB Keyboard as
/devices/pci0000:00/0000:00:02.0/usb1/1-3/1-3:1.0/input/input4
[ 5.517103] generic-usb 0003:03F0:0024.0002: input,hidraw1: USB HID
v1.10 Keyboard [CHICONY HP Basic USB Keyboard] on
usb-0000:00:02.0-3/input0
[ 5.820023] usb 1-9: new low speed USB device using ohci_hcd and
address 4
[ 6.034456] usb 1-9: configuration #1 chosen from 1 choice
[ 6.053544] input: Acer IR Receiver as
/devices/pci0000:00/0000:00:02.0/usb1/1-9/1-9:1.0/input/input5
[ 6.085222] generic-usb 0003:147A:E00D.0003: input,hiddev96,hidraw2:
USB HID v1.10 Keyboard [Acer IR Receiver] on usb-0000:00:02.0-9/input0
[ 9.384182] usb-storage: device scan complete
[ 9.390775] scsi 6:0:0:0: Direct-Access Generic- Compact Flash
1.00 PQ: 0 ANSI: 0 CCS
[ 9.397277] scsi 6:0:0:1: Direct-Access Generic- SM/xD-Picture
1.00 PQ: 0 ANSI: 0 CCS
[ 9.403887] scsi 6:0:0:2: Direct-Access Generic- SD/MMC
1.00 PQ: 0 ANSI: 0 CCS
[ 9.410511] scsi 6:0:0:3: Direct-Access Generic- MS/MS-Pro
1.00 PQ: 0 ANSI: 0 CCS
[ 9.413004] sd 6:0:0:0: [sdc] Attached SCSI removable disk
[ 9.413108] sd 6:0:0:0: Attached scsi generic sg3 type 0
[ 9.415389] sd 6:0:0:1: [sdd] Attached SCSI removable disk
[ 9.415500] sd 6:0:0:1: Attached scsi generic sg4 type 0
[ 9.417911] sd 6:0:0:2: [sde] Attached SCSI removable disk
[ 9.418022] sd 6:0:0:2: Attached scsi generic sg5 type 0
[ 9.419181] sd 6:0:0:3: [sdf] Attached SCSI removable disk
[ 9.419306] sd 6:0:0:3: Attached scsi generic sg6 type 0
[ 81.410405] udev: starting version 138
[ 82.691650] parport_pc 00:0a: reported by Plug and Play ACPI
[ 82.691705] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 83.874765] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x1c00
[ 83.874782] i2c-adapter i2c-1: nForce2 SMBus adapter at 0xf400
[ 84.240784] input: PC Speaker as
/devices/platform/pcspkr/input/input6
[ 84.564195] ppdev: user-space parallel port driver
[ 84.876434] acer-wmi: Acer Laptop ACPI-WMI Extras
[ 84.876453] acer-wmi: No or unsupported WMI interface, unable to load
[ 85.413983] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 23
[ 85.413993] HDA Intel 0000:00:05.0: PCI INT B -> Link[AAZA] -> GSI
23 (level, low) -> IRQ 23
[ 85.414137] HDA Intel 0000:00:05.0: setting latency timer to 64
[ 85.804022] hda_codec: Unknown model for ALC883, trying auto-probe
from BIOS...
[ 90.024637] Adding 10626988k swap on /dev/sda2. Priority:-1
extents:1 across:10626988k
[ 96.035224] lp0: using parport0 (interrupt-driven).
[ 104.734448] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 104.734453] Bluetooth: BNEP filters: protocol multicast
[ 104.894118] Bridge firewalling registered
[ 117.682699] sky2 eth0: enabling interface
[ 117.684413] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 121.529638] sky2 eth0: Link is up at 1000 Mbps, full duplex, flow
control both
[ 121.531302] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 124.593625] warning: `pulseaudio' uses 32-bit capabilities (legacy
support in use)
[ 132.308020] eth0: no IPv6 routers present
ubuntu at ubuntu:~$ lspci -v
00:00.0 RAM memory: nVidia Corporation MCP61 Memory Controller (rev a1)
Subsystem: Elitegroup Computer Systems Device 2601
Flags: bus master, 66MHz, fast devsel, latency 0
Capabilities: <access denied>
00:01.0 ISA bridge: nVidia Corporation MCP61 LPC Bridge (rev a2)
Subsystem: Elitegroup Computer Systems Device 2601
Flags: bus master, 66MHz, fast devsel, latency 0
00:01.1 SMBus: nVidia Corporation MCP61 SMBus (rev a2)
Subsystem: Elitegroup Computer Systems Device 2601
Flags: 66MHz, fast devsel, IRQ 5
I/O ports at fc00 [size=64]
I/O ports at 1c00 [size=64]
I/O ports at f400 [size=64]
Capabilities: <access denied>
Kernel driver in use: nForce2_smbus
Kernel modules: i2c-nforce2
00:01.2 RAM memory: nVidia Corporation MCP61 Memory Controller (rev a2)
Subsystem: Elitegroup Computer Systems Device 2601
Flags: 66MHz, fast devsel
00:02.0 USB Controller: nVidia Corporation MCP61 USB Controller (rev
a3) (prog-if 10)
Subsystem: Elitegroup Computer Systems Device 2601
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 21
Memory at fe02f000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ohci_hcd
Kernel modules: ohci-hcd
00:02.1 USB Controller: nVidia Corporation MCP61 USB Controller (rev
a3) (prog-if 20)
Subsystem: Elitegroup Computer Systems Device 2601
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 20
Memory at fe02e000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:04.0 PCI bridge: nVidia Corporation MCP61 PCI bridge (rev a1)
(prog-if 01)
Flags: bus master, 66MHz, fast devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: fdf00000-fdffffff
Prefetchable memory behind bridge: fd800000-fd8fffff
Capabilities: <access denied>
00:05.0 Audio device: nVidia Corporation MCP61 High Definition Audio
(rev a2)
Subsystem: Elitegroup Computer Systems Device a88d
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 23
Memory at fe028000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
00:06.0 IDE interface: nVidia Corporation MCP61 IDE (rev a2) (prog-if
8a [Master SecP PriP])
Subsystem: Device f019:2601
Flags: bus master, 66MHz, fast devsel, latency 0
[virtual] Memory at 000001f0 (32-bit, non-prefetchable)
[disabled] [size=8]
[virtual] Memory at 000003f0 (type 3, non-prefetchable)
[disabled] [size=1]
[virtual] Memory at 00000170 (32-bit, non-prefetchable)
[disabled] [size=8]
[virtual] Memory at 00000370 (type 3, non-prefetchable)
[disabled] [size=1]
I/O ports at f000 [size=16]
Capabilities: <access denied>
Kernel driver in use: pata_amd
00:08.0 IDE interface: nVidia Corporation MCP61 SATA Controller (rev
a2) (prog-if 85 [Master SecO PriO])
Subsystem: Elitegroup Computer Systems Device 2601
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 23
I/O ports at 09f0 [size=8]
I/O ports at 0bf0 [size=4]
I/O ports at 0970 [size=8]
I/O ports at 0b70 [size=4]
I/O ports at dc00 [size=16]
Memory at fe02d000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: sata_nv
00:08.1 IDE interface: nVidia Corporation MCP61 SATA Controller (rev
a2) (prog-if 85 [Master SecO PriO])
Subsystem: Elitegroup Computer Systems Device 2601
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 22
I/O ports at 09e0 [size=8]
I/O ports at 0be0 [size=4]
I/O ports at 0960 [size=8]
I/O ports at 0b60 [size=4]
I/O ports at c800 [size=16]
Memory at fe02c000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: sata_nv
00:09.0 PCI bridge: nVidia Corporation MCP61 PCI Express bridge (rev a2)
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000a000-0000afff
Memory behind bridge: fde00000-fdefffff
Prefetchable memory behind bridge:
00000000fdd00000-00000000fddfffff
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:0b.0 PCI bridge: nVidia Corporation MCP61 PCI Express bridge (rev a2)
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 00009000-00009fff
Memory behind bridge: fdc00000-fdcfffff
Prefetchable memory behind bridge:
00000000fdb00000-00000000fdbfffff
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:0c.0 PCI bridge: nVidia Corporation MCP61 PCI Express bridge (rev a2)
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 00008000-00008fff
Memory behind bridge: fda00000-fdafffff
Prefetchable memory behind bridge:
00000000fd900000-00000000fd9fffff
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:0d.0 VGA compatible controller: nVidia Corporation GeForce 6150SE
nForce 430 (rev a2)
Subsystem: Elitegroup Computer Systems Device 2601
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 11
Memory at fb000000 (32-bit, non-prefetchable) [size=16M]
Memory at e0000000 (64-bit, prefetchable) [size=256M]
Memory at fc000000 (64-bit, non-prefetchable) [size=16M]
[virtual] Expansion ROM at f4000000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel modules: nvidiafb
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
HyperTransport Technology Configuration
Flags: fast devsel
Capabilities: <access denied>
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
Address Map
Flags: fast devsel
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
DRAM Controller
Flags: fast devsel
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
Miscellaneous Control
Flags: fast devsel
Capabilities: <access denied>
Kernel driver in use: k8temp
Kernel modules: k8temp
01:09.0 FireWire (IEEE 1394): Texas Instruments TSB43AB23
IEEE-1394a-2000 Controller (PHY/Link) (prog-if 10)
Subsystem: Elitegroup Computer Systems Device 8056
Flags: bus master, medium devsel, latency 64, IRQ 19
Memory at fdfff000 (32-bit, non-prefetchable) [size=2K]
Memory at fdff8000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: ohci1394
Kernel modules: firewire-ohci, ohci1394
03:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8056
PCI-E Gigabit Ethernet Controller (rev 12)
Subsystem: Elitegroup Computer Systems Device 8056
Flags: bus master, fast devsel, latency 0, IRQ 2300
Memory at fdcfc000 (64-bit, non-prefetchable) [size=16K]
I/O ports at 9c00 [size=256]
[virtual] Expansion ROM at fdb00000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: sky2
Kernel modules: sky2
ubuntu at ubuntu:~$ lspci
00:00.0 RAM memory: nVidia Corporation MCP61 Memory Controller (rev a1)
00:01.0 ISA bridge: nVidia Corporation MCP61 LPC Bridge (rev a2)
00:01.1 SMBus: nVidia Corporation MCP61 SMBus (rev a2)
00:01.2 RAM memory: nVidia Corporation MCP61 Memory Controller (rev a2)
00:02.0 USB Controller: nVidia Corporation MCP61 USB Controller (rev a3)
00:02.1 USB Controller: nVidia Corporation MCP61 USB Controller (rev a3)
00:04.0 PCI bridge: nVidia Corporation MCP61 PCI bridge (rev a1)
00:05.0 Audio device: nVidia Corporation MCP61 High Definition Audio
(rev a2)
00:06.0 IDE interface: nVidia Corporation MCP61 IDE (rev a2)
00:08.0 IDE interface: nVidia Corporation MCP61 SATA Controller (rev a2)
00:08.1 IDE interface: nVidia Corporation MCP61 SATA Controller (rev a2)
00:09.0 PCI bridge: nVidia Corporation MCP61 PCI Express bridge (rev a2)
00:0b.0 PCI bridge: nVidia Corporation MCP61 PCI Express bridge (rev a2)
00:0c.0 PCI bridge: nVidia Corporation MCP61 PCI Express bridge (rev a2)
00:0d.0 VGA compatible controller: nVidia Corporation GeForce 6150SE
nForce 430 (rev a2)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
Miscellaneous Control
01:09.0 FireWire (IEEE 1394): Texas Instruments TSB43AB23
IEEE-1394a-2000 Controller (PHY/Link)
03:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8056
PCI-E Gigabit Ethernet Controller (rev 12)
ubuntu at ubuntu:~$
ubuntu at ubuntu:~$
des at acer:/tornadodata$
On Feb 19, 2009, at 1:37 PM, Stefan Richter wrote:
> How does "lspci -v" show the controller? The PCI IDs look like from
> the
> Texas Instruments TSB43AB** family.
>
> The messages
> ohci1394: fw-host0: Get PHY Reg timeout
> [0x00000000/0x00000000/100]
> indicate that the drivers were unable to perform the last steps of
> initialization. For now I don't know why.
>
> What if you load the new alternative drivers instead of the old ones?
> According to your lspci, the new ones are installed in parallel
> already. The new drivers were quite buggy in kernel 2.6.24 though.
> # modprobe -r ohci1394
> # modprobe firewire-ohci
>
> --
> ieee1394 port not recognized
> https://bugs.launchpad.net/bugs/329277
> You received this bug notification because you are a direct subscriber
> of the bug.
>
> Status in “linux-meta” source package in Ubuntu: New
>
> Bug description:
> Jaunty a4 on an Acer ASE 380-UD440A
> 64bit AMD 4400+ Brisbane CPU
>
> also, all the hardware ports are listed in Gnome Desktop
> (I dont know if that is expected or not)
>
> see attachments
>
> ProblemType: Bug
> Architecture: amd64
> Date: Fri Feb 13 17:54:20 2009
> Dependencies:
>
> DistroRelease: Ubuntu 8.04
> NonfreeKernelModules: nvidia
> Package: linux None [modified: /var/lib/dpkg/info/linux.list]
> PackageArchitecture: amd64
> ProcEnviron:
>
> PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/
> usr/games
> LANG=en_US.UTF-8
> SHELL=/bin/bash
> SourcePackage: linux-meta
> Uname: Linux 2.6.24-23-generic x86_64
--
ieee1394 port not recognized
https://bugs.launchpad.net/bugs/329277
You received this bug notification because you are a member of Kernel
Bugs, which is subscribed to linux-meta in ubuntu.
More information about the kernel-bugs
mailing list