[Bug 341952] Re: ath5k locks up system in jaunty - "ath5k phy0: noise floor calibration timeout"

[Giovanni Bajo]

I have the same problem with ath5k. This is an excrept of my dmesg:

[   66.178325] ath5k phy0: noise floor calibration timeout (2442MHz)
[   66.285455] ath5k phy0: noise floor calibration failed (2447MHz)
[   66.393691] ath5k phy0: noise floor calibration failed (2452MHz)
[   66.532438] ath5k phy0: noise floor calibration failed (2457MHz)

This is the ping to my router:

PING 192.168.1.1 (192.168.1.1) 56(84) bytes of data.
64 bytes from 192.168.1.1: icmp_seq=1 ttl=64 time=26.3 ms
64 bytes from 192.168.1.1: icmp_seq=2 ttl=64 time=30.2 ms
64 bytes from 192.168.1.1: icmp_seq=3 ttl=64 time=28.5 ms
64 bytes from 192.168.1.1: icmp_seq=4 ttl=64 time=24.9 ms
64 bytes from 192.168.1.1: icmp_seq=5 ttl=64 time=21.7 ms
64 bytes from 192.168.1.1: icmp_seq=6 ttl=64 time=73.1 ms
64 bytes from 192.168.1.1: icmp_seq=7 ttl=64 time=67.9 ms

(should be < 1ms).

I have installed linux-backports-modules-jaunty (2.6.28.11.15) but
nothing changed.

Linux ozzu 2.6.28-11-generic #42-Ubuntu SMP Fri Apr 17 01:58:03 UTC 2009
x86_64 GNU/Linux

Just upgraded to Jaunty... :(

-- 
ath5k locks up system  in jaunty - "ath5k phy0: noise floor calibration timeout"  
https://bugs.launchpad.net/bugs/341952
You received this bug notification because you are a member of Kernel
Bugs, which is a direct subscriber.