[Bug 327499] Re: kernel 2.6.28 doesn't boot on a dell inspiron 2650

[Stefan Bader]

My PPA (https://launchpad.net/~stefan-bader-
canonical/+archive/karmic/+packages) is currently building
2.6.31-16.51~pre2, which should contain the upstream patch that should
fix the problem.

** Changed in: linux (Ubuntu Karmic)
   Importance: Undecided => Medium

** Changed in: linux (Ubuntu Karmic)
       Status: New => Fix Committed

** Description changed:

+ SRU Justification:
+ 
+ Impact: The following upstream change
+ "ACPI: Attach the ACPI device to the ACPI handle as early as possible"
+ caused the Dell Inspiron 2650 not to boot anymore.
+ 
+ Fix: Upstream revert, which comes in with 2.6.31.6 is supposed to fix
+ this.
+ 
+ ---
+ 
  Binary package hint: linux-image-2.6.28-7-generic
  
- 
- The boot process stops at the point on the image attached below.  I tried with kernels 2.6.28-4 through 2.6.28-7, as well as custom compiled 2.6.29-rc3.  None of those boots properly. The 2.6.27 series works fine.
+ The boot process stops at the point on the image attached below.  I
+ tried with kernels 2.6.28-4 through 2.6.28-7, as well as custom compiled
+ 2.6.29-rc3.  None of those boots properly. The 2.6.27 series works fine.
  
  The output of lspci is:
  
  00:00.0 Host bridge: Intel Corporation 82845 845 [Brookdale] Chipset Host Bridge (rev 05)
  00:01.0 PCI bridge: Intel Corporation 82845 845 [Brookdale] Chipset AGP Bridge (rev 05)
  00:1d.0 USB Controller: Intel Corporation 82801CA/CAM USB Controller #1 (rev 02)
  00:1d.1 USB Controller: Intel Corporation 82801CA/CAM USB Controller #2 (rev 02)
  00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 42)
  00:1f.0 ISA bridge: Intel Corporation 82801CAM ISA Bridge (LPC) (rev 02)
  00:1f.1 IDE interface: Intel Corporation 82801CAM IDE U100 Controller (rev 02)
  00:1f.3 SMBus: Intel Corporation 82801CA/CAM SMBus Controller (rev 02)
  00:1f.5 Multimedia audio controller: Intel Corporation 82801CA/CAM AC'97 Audio Controller (rev 02)
  00:1f.6 Modem: Intel Corporation 82801CA/CAM AC'97 Modem Controller (rev 02)
  01:00.0 VGA compatible controller: nVidia Corporation NV11 [GeForce2 Go] (rev b2)
  02:01.0 Ethernet controller: 3Com Corporation 3c905C-TX/TX-M [Tornado] (rev 78)
  02:04.0 CardBus bridge: O2 Micro, Inc. OZ601/6912/711E0 CardBus/SmartCardBus Controller

-- 
kernel 2.6.28 doesn't boot on a dell inspiron 2650
https://bugs.launchpad.net/bugs/327499
You received this bug notification because you are a member of Kernel
Bugs, which is subscribed to Linux.