[Bug 565397] [NEW] [Lucid] pata_via: ATA interface resets and gets disabled: ata3.00: limited to UDMA/33 due to 40-wire cable, TEST_UNIT_READY failed (err_mask=0x5)

Sat Apr 17 14:42:35 UTC 2010

*** This bug is a duplicate of bug 544548 ***
    https://bugs.launchpad.net/bugs/544548

Public bug reported:

The problem appeared imediately after upgrade from Karmic to Lucid - I can't get ATA interface working on kernel 2.6.32 while it was working without problems on 2.6.31.
Kernel says that ATA interface is "limited to UDMA/33 due to 40-wire cable" but I have 80-wire cable which worked without problems on Kubuntu versions from Breezy/Dapper to Karmic...
After it's finding devices the ATA interface gets timeout and resets in consequence after few tries it gets disabled.

$ dmesg | grep ata
[    0.000000]  BIOS-e820: 00000000abfd0000 - 00000000abfde000 (ACPI data)
[    0.000000]  modified: 00000000abfd0000 - 00000000abfde000 (ACPI data)
[    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
[    0.000000] Memory: 2762944k/2817856k available (4673k kernel code, 53452k reserved, 2122k data, 656k init, 1908552k highmem)
[    0.000000]       .data : 0xc0590613 - 0xc07a2e48   (2122 kB)
[    0.248347] libata version 3.00 loaded.
[    0.357334] pata_acpi 0000:00:0f.0: PCI INT B -> GSI 20 (level, low) -> IRQ 20
[    0.357404] pata_acpi 0000:00:0f.0: PCI INT B disabled
[    0.357432] pata_acpi 0000:00:0f.1: can't derive routing for PCI INT A
[    0.357475] pata_acpi 0000:00:0f.1: can't derive routing for PCI INT A
[    0.714189] Write protecting the kernel read-only data: 1840k
[    1.021893] sata_via 0000:00:0f.0: version 2.4
[    1.021915] sata_via 0000:00:0f.0: PCI INT B -> GSI 20 (level, low) -> IRQ 20
[    1.021973] sata_via 0000:00:0f.0: routed to hard irq line 5
[    1.051184] scsi0 : sata_via
[    1.051518] scsi1 : sata_via
[    1.054428] ata1: SATA max UDMA/133 cmd 0xcc00 ctl 0xc480 bmdma 0xc000 irq 20
[    1.054435] ata2: SATA max UDMA/133 cmd 0xc400 ctl 0xc080 bmdma 0xc008 irq 20
[    1.269018] ata1: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
[    1.480018] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.652220] ata2.00: HPA unlocked: 488395055 -> 488397168, native 488397168
[    1.652228] ata2.00: ATA-7: ST3250823AS, 3.03, max UDMA/133
[    1.652232] ata2.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    1.668388] ata2.00: configured for UDMA/133
[   17.658132] EXT3-fs: mounted filesystem with ordered data mode.
[   56.566278] pata_via 0000:00:0f.1: version 0.3.4
[   56.566319] pata_via 0000:00:0f.1: can't derive routing for PCI INT A
[   56.607356] scsi2 : pata_via
[   56.658125] scsi3 : pata_via
[   56.662704] ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14
[   56.662712] ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15
[   57.029578] ata3.00: ATAPI: HL-DT-STDVDRRW GSA-4166B, 1.02, max UDMA/66
[   57.029646] ata3.01: ATAPI: LITE-ON DVDRW SOHW-1213S, TSD1, max UDMA/66
[   57.029694] ata3.00: limited to UDMA/33 due to 40-wire cable
[   57.029699] ata3.01: limited to UDMA/33 due to 40-wire cable
[   57.045476] ata3.00: configured for UDMA/33
[   57.061354] ata3.01: configured for UDMA/33
[   57.259484] EXT3-fs: mounted filesystem with ordered data mode.
[  138.805032] ata3: lost interrupt (Status 0x51)
[  143.804041] ata3.00: qc timeout (cmd 0xa0)
[  143.804057] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[  143.804082] ata3.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
[  143.804088] ata3.00: status: { DRDY ERR }
[  143.804117] ata3: soft resetting link
[  144.160399] ata3.00: configured for UDMA/33
[  144.176289] ata3.01: configured for UDMA/33
[  149.176040] ata3.00: qc timeout (cmd 0xa0)
[  149.176050] ata3.00: TEST_UNIT_READY failed (err_mask=0x5)
[  149.176080] ata3: soft resetting link
[  149.532393] ata3.00: configured for UDMA/33
[  149.548306] ata3.01: configured for UDMA/33
[  154.548043] ata3.00: qc timeout (cmd 0xa0)
[  154.548053] ata3.00: TEST_UNIT_READY failed (err_mask=0x5)
[  154.548060] ata3.00: limiting speed to UDMA/33:PIO3
[  154.548088] ata3: soft resetting link
[  154.904412] ata3.00: configured for UDMA/33
[  154.920293] ata3.01: configured for UDMA/33
[  159.920044] ata3.00: qc timeout (cmd 0xa0)
[  159.920053] ata3.00: TEST_UNIT_READY failed (err_mask=0x5)
[  159.920057] ata3.00: disabled
[  159.920075] ata3.01: TEST_UNIT_READY failed (err_mask=0x40)
[  159.920101] ata3: soft resetting link
[  160.268302] ata3.01: configured for UDMA/33
[  165.268037] ata3.01: qc timeout (cmd 0xa0)
[  165.268047] ata3.01: TEST_UNIT_READY failed (err_mask=0x5)
[  165.268053] ata3.01: limiting speed to UDMA/33:PIO3
[  165.268082] ata3: soft resetting link
[  165.616312] ata3.01: configured for UDMA/33
[  170.616040] ata3.01: qc timeout (cmd 0xa0)
[  170.616050] ata3.01: TEST_UNIT_READY failed (err_mask=0x5)
[  170.616055] ata3.01: disabled
[  170.616103] ata3: soft resetting link
[  170.940119] ata3: EH complete

ProblemType: Bug
DistroRelease: Ubuntu 10.04
Package: linux-image-2.6.32-21-generic 2.6.32-21.32
Regression: Yes
Reproducible: Yes
ProcVersionSignature: Ubuntu 2.6.32-21.32-generic 2.6.32.11+drm33.2
Uname: Linux 2.6.32-21-generic i686
AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.21.
Architecture: i386
AudioDevicesInUse:
 USER        PID ACCESS COMMAND
 /dev/snd/controlC0:  xeros     28843 F.... pulseaudio
                      xeros     28867 F.... kmix
 /dev/snd/controlC1:  xeros     28843 F.... pulseaudio
                      xeros     28867 F.... kmix
CRDA: Error: command ['iw', 'reg', 'get'] failed with exit code 1: nl80211 not found.
Card0.Amixer.info:
 Card hw:0 'V8237'/'VIA 8237 with AD1888 at 0xa800, irq 22'
   Mixer name	: 'Analog Devices AD1888'
   Components	: 'AC97a:41445368'
   Controls      : 52
   Simple ctrls  : 34
Card1.Amixer.info:
 Card hw:1 'Bt878'/'Brooktree Bt878 at 0xafffe000, irq 17'
   Mixer name	: 'Bt87x'
   Components	: ''
   Controls      : 3
   Simple ctrls  : 5
Date: Sat Apr 17 16:27:40 2010
HibernationDevice: RESUME=UUID=4dc6e49e-e55e-4c9e-b35c-6c6db9dbd3d1
MachineType: System manufacturer System Product Name
ProcCmdLine: root=UUID=82e29357-9603-403e-86ed-b37dcc794d6b ro ipv6.disable=1 quiet splash
ProcEnviron:
 LANGUAGE=
 PATH=(custom, user)
 LANG=pl_PL.UTF-8
 SHELL=/bin/bash
RelatedPackageVersions: linux-firmware 1.34
RfKill:
 0: hci0: Bluetooth
 	Soft blocked: no
 	Hard blocked: no
SourcePackage: linux
WifiSyslog:
 Apr 17 15:52:29 Wiolusia NetworkManager:    SCPlugin-Ifupdown: devices added (path: /sys/devices/virtual/net/ppp0, iface: ppp0)
 Apr 17 15:52:29 Wiolusia NetworkManager:    SCPlugin-Ifupdown: device added (path: /sys/devices/virtual/net/ppp0, iface: ppp0): no ifupdown configuration found.
 Apr 17 16:11:39 Wiolusia kernel: [ 2093.440635] udev: starting version 151
WpaSupplicantLog:

dmi.bios.date: 08/17/2006
dmi.bios.vendor: American Megatrends Inc.
dmi.bios.version: 0704
dmi.board.asset.tag: To Be Filled By O.E.M.
dmi.board.name: P4V800D-X
dmi.board.vendor: ASUSTeK Computer INC.
dmi.board.version: Rev X.XX
dmi.chassis.asset.tag: Asset-1234567890
dmi.chassis.type: 3
dmi.chassis.vendor: Chassis Manufacture
dmi.chassis.version: Chassis Version
dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr0704:bd08/17/2006:svnSystemmanufacturer:pnSystemProductName:pvrSystemVersion:rvnASUSTeKComputerINC.:rnP4V800D-X:rvrRevX.XX:cvnChassisManufacture:ct3:cvrChassisVersion:
dmi.product.name: System Product Name
dmi.product.version: System Version
dmi.sys.vendor: System manufacturer

** Affects: linux (Ubuntu)
     Importance: Undecided
         Status: New

** Tags: apport-bug i386 lucid needs-upstream-testing regression-proposed

-- 
[Lucid] pata_via: ATA interface resets and gets disabled: ata3.00: limited to UDMA/33 due to 40-wire cable, TEST_UNIT_READY failed (err_mask=0x5) 
https://bugs.launchpad.net/bugs/565397
You received this bug notification because you are a member of Kernel
Bugs, which is subscribed to linux in ubuntu.