[Bug 371434] Re: PCI ExpressCard hotplug requires pciehp.pciehp_force=1

[ceg]

For me also only the combination of pciehp.pciehp_force=1 and loading
the acpiphp seems to work for me, too (most of the times). Thanks for
the hint!

(Even though we were originally supposed to set pciehp.pciehp_force=0
with acpiphp, right?)


Concerning my lspci output from above:
02:00.0 SATA controller: JMicron Technology Corp. JMB362/JMB363 AHCI Controller (rev 03)
02:00.1 IDE interface: JMicron Technology Corp. JMB362/JMB363 AHCI Controller (rev 03)

The IDE interface seems to stay listed even if the card is removed,
while the SATA controler appears only after a disk is attached after the
card is inserted.

And actually both of those may be related to the same express card, because I think the internal sata controller really is this one:
00:12.0 IDE interface: ATI Technologies Inc IXP SB400 Serial ATA Controller (rev 80)

-- 
PCI ExpressCard hotplug requires pciehp.pciehp_force=1
https://bugs.launchpad.net/bugs/371434
You received this bug notification because you are a member of Kernel
Bugs, which is subscribed to linux in ubuntu.