[Bug 509854] Re: marvell network card not working (no eth0 device)

[meganis]

I've just updated to 10.4 RC, and now the card is being handled by sky2
driver, without any intervention from my side.

sudo lshw -c network
  *-network               
       description: Wireless interface
       product: AR9285 Wireless Network Adapter (PCI-Express)
       vendor: Atheros Communications Inc.
       physical id: 0
       bus info: pci at 0000:02:00.0
       logical name: wlan0
       version: 01
       serial: 90:4c:e5:38:d1:b8
       width: 64 bits
       clock: 33MHz
       capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless
       configuration: broadcast=yes driver=ath9k latency=0 multicast=yes wireless=IEEE 802.11bgn
       resources: irq:16 memory:f6800000-f680ffff
  *-network
       description: Ethernet interface
       product: Marvell Technology Group Ltd.
       vendor: Marvell Technology Group Ltd.
       physical id: 0
       bus info: pci at 0000:06:00.0
       logical name: eth0
       version: 11
       serial: 00:24:54:40:e1:23
       size: 10MB/s
       capacity: 1GB/s
       width: 64 bits
       clock: 33MHz
       capabilities: pm msi pciexpress bus_master cap_list rom ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation
       configuration: autonegotiation=on broadcast=yes driver=sky2 driverversion=1.25 duplex=half firmware=N/A ip=10.240.5.64 latency=0 link=yes multicast=yes port=twisted pair speed=10MB/s
       resources: irq:34 memory:f5420000-f5423fff ioport:b000(size=256) memory:f5400000-f541ffff(prefetchable)

-- 
marvell network card not working (no eth0 device)
https://bugs.launchpad.net/bugs/509854
You received this bug notification because you are a member of Kernel
Bugs, which is subscribed to linux in ubuntu.