[Bug 106634] Re: LG P1 Express Dual (0x1854005f)'s internal speakers don't work
poncije
106634 at bugs.launchpad.net
Wed Jul 14 16:51:41 UTC 2010
Well this matter is a simple one.
You just have to add a line somewhere... (Taking a minute to search the web)
just add to /etc/modprobe.d/alsa-base the following line:
options snd-hda-intel model=laptop enable=1 index=0
And now you have to RESTART the computer.
Have fun!
pivot
On Tue, Jul 13, 2010 at 9:47 PM, Brad Figg <brad.figg at canonical.com>
wrote:
> ** Tags added: kj-triage
>
> --
> LG P1 Express Dual (0x1854005f)'s internal speakers don't work
> https://bugs.launchpad.net/bugs/106634
> You received this bug notification because you are a direct subscriber
> of the bug.
>
> Status in “linux” package in Ubuntu: New
> Status in “linux-source-2.6.20” package in Ubuntu: Won't Fix
>
> Bug description:
> I am using an LG P1 Express Dual Laptop, with an 82801G (ICH7 Family) High
> Definition Audio Controller. It has 3 jacks, 5.1 channel sound and no
> digital output, so the correct model should be 3stack-6ch (although i've
> treid all others as well).
> The Problem is, that i do not have any sound coming from the laptop's
> internal speakers. Sound from the Headphones works fine.
> I have already tried the following:
> - Played with the sound settings in alsamixer. Depending on the model used
> in /etc/modprobe.d/alsa-base i get different sets of controls, but no sound
> on the speakers, in no possible setting
> - Tried every model-setting that the alsa documentation listed for the
> ALC883 model. There is no entry there for the 82801G model and ALC883 is the
> soundcard that shows up in dmesg if an unknown model is specified
> - Installed the latest alsa (1.0.14rc3 for base and drivers, 1.0.14rc2 for
> utils)
> My guess is that there is a software switch that turns on the internal
> speakers. It appears that this switch is ignored by alsa.
> Here are the required infos:
>
> tail -2 /proc/asound/oss/sndstat
> Mixers:
> 0: Realtek ALC883
>
> amixer
> Simple mixer control 'Headphone',0
> Capabilities: pswitch
> Playback channels: Front Left - Front Right
> Mono:
> Front Left: Playback [on]
> Front Right: Playback [on]
> Simple mixer control 'PCM',0
> Capabilities: pvolume
> Playback channels: Front Left - Front Right
> Limits: Playback 0 - 255
> Mono:
> Front Left: Playback 255 [100%] [0.00dB]
> Front Right: Playback 255 [100%] [0.00dB]
> Simple mixer control 'Front',0
> Capabilities: pvolume pswitch
> Playback channels: Front Left - Front Right
> Limits: Playback 0 - 31
> Mono:
> Front Left: Playback 31 [100%] [0.00dB] [on]
> Front Right: Playback 31 [100%] [0.00dB] [on]
> Simple mixer control 'Front Mic',0
> Capabilities: pvolume pswitch
> Playback channels: Front Left - Front Right
> Limits: Playback 0 - 31
> Mono:
> Front Left: Playback 31 [100%] [12.00dB] [on]
> Front Right: Playback 31 [100%] [12.00dB] [on]
> Simple mixer control 'Front Mic Boost',0
> Capabilities: volume
> Playback channels: Front Left - Front Right
> Capture channels: Front Left - Front Right
> Limits: 0 - 3
> Front Left: 3 [100%]
> Front Right: 3 [100%]
> Simple mixer control 'Surround',0
> Capabilities: pvolume pswitch
> Playback channels: Front Left - Front Right
> Limits: Playback 0 - 31
> Mono:
> Front Left: Playback 24 [77%] [-10.50dB] [on]
> Front Right: Playback 24 [77%] [-10.50dB] [on]
> Simple mixer control 'Center',0
> Capabilities: pvolume pvolume-joined pswitch pswitch-joined
> Playback channels: Mono
> Limits: Playback 0 - 31
> Mono: Playback 24 [77%] [-10.50dB] [on]
> Simple mixer control 'LFE',0
> Capabilities: pvolume pvolume-joined pswitch pswitch-joined
> Playback channels: Mono
> Limits: Playback 0 - 31
> Mono: Playback 19 [61%] [-18.00dB] [on]
> Simple mixer control 'Side',0
> Capabilities: pvolume pswitch
> Playback channels: Front Left - Front Right
> Limits: Playback 0 - 31
> Mono:
> Front Left: Playback 25 [81%] [-9.00dB] [on]
> Front Right: Playback 25 [81%] [-9.00dB] [on]
> Simple mixer control 'Line',0
> Capabilities: pvolume pswitch
> Playback channels: Front Left - Front Right
> Limits: Playback 0 - 31
> Mono:
> Front Left: Playback 21 [68%] [-3.00dB] [on]
> Front Right: Playback 21 [68%] [-3.00dB] [on]
> Simple mixer control 'CD',0
> Capabilities: pvolume pswitch
> Playback channels: Front Left - Front Right
> Limits: Playback 0 - 31
> Mono:
> Front Left: Playback 25 [81%] [3.00dB] [on]
> Front Right: Playback 25 [81%] [3.00dB] [on]
> Simple mixer control 'Mic',0
> Capabilities: pvolume pswitch
> Playback channels: Front Left - Front Right
> Limits: Playback 0 - 31
> Mono:
> Front Left: Playback 10 [32%] [-19.50dB] [on]
> Front Right: Playback 10 [32%] [-19.50dB] [on]
> Simple mixer control 'Mic Boost',0
> Capabilities: volume
> Playback channels: Front Left - Front Right
> Capture channels: Front Left - Front Right
> Limits: 0 - 3
> Front Left: 3 [100%]
> Front Right: 3 [100%]
> Simple mixer control 'PC Speaker',0
> Capabilities: pvolume pswitch
> Playback channels: Front Left - Front Right
> Limits: Playback 0 - 31
> Mono:
> Front Left: Playback 28 [90%] [7.50dB] [on]
> Front Right: Playback 28 [90%] [7.50dB] [on]
> Simple mixer control 'Capture',0
> Capabilities: cvolume cswitch
> Capture channels: Front Left - Front Right
> Limits: Capture 0 - 31
> Front Left: Capture 0 [0%] [-12.00dB] [off]
> Front Right: Capture 0 [0%] [-12.00dB] [off]
> Simple mixer control 'Capture',1
> Capabilities: cvolume cswitch
> Capture channels: Front Left - Front Right
> Limits: Capture 0 - 31
> Front Left: Capture 0 [0%] [-12.00dB] [off]
> Front Right: Capture 0 [0%] [-12.00dB] [off]
> Simple mixer control 'Caller ID',0
> Capabilities: pswitch pswitch-joined
> Playback channels: Mono
> Mono: Playback [on]
> Simple mixer control 'Channel Mode',0
> Capabilities: enum
> Items: '2ch'
> Item0: '2ch'
> Simple mixer control 'Input Source',0
> Capabilities: enum
> Items: 'Mic' 'Front Mic' 'Line' 'CD'
> Item0: 'Mic'
> Simple mixer control 'Input Source',1
> Capabilities: enum
> Items: 'Mic' 'Front Mic' 'Line' 'CD'
> Item0: 'Mic'
> Simple mixer control 'Off-hook',0
> Capabilities: pswitch pswitch-joined
> Playback channels: Mono
> Mono: Playback [on]
>
> lspci -nv
> 00:00.0 0600: 8086:27a0 (rev 03)
> Subsystem: 1854:005f
> Flags: bus master, fast devsel, latency 0
> Capabilities: [e0] Vendor Specific Information
>
> 00:01.0 0604: 8086:27a1 (rev 03) (prog-if 00 [Normal decode])
> Flags: bus master, fast devsel, latency 0
> Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
> I/O behind bridge: 00002000-00002fff
> Memory behind bridge: d8000000-d80fffff
> Prefetchable memory behind bridge: 00000000c8000000-00000000cfffffff
> Capabilities: [88] Subsystem: 8086:0000
> Capabilities: [80] Power Management version 2
> Capabilities: [90] Message Signalled Interrupts: Mask- 64bit-
> Queue=0/0 Enable-
> Capabilities: [a0] Express Root Port (Slot+) IRQ 0
>
> 00:1b.0 0403: 8086:27d8 (rev 02)
> Subsystem: 1854:005f
> Flags: bus master, fast devsel, latency 0, IRQ 22
> Memory at d8500000 (64-bit, non-prefetchable) [size=16K]
> Capabilities: [50] Power Management version 2
> Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+
> Queue=0/0 Enable-
> Capabilities: [70] Express Unknown type IRQ 0
>
> 00:1c.0 0604: 8086:27d0 (rev 02) (prog-if 00 [Normal decode])
> Flags: bus master, fast devsel, latency 0
> Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
> I/O behind bridge: 00003000-00003fff
> Memory behind bridge: d4000000-d5ffffff
> Prefetchable memory behind bridge: 00000000d0000000-00000000d1ffffff
> Capabilities: [40] Express Root Port (Slot+) IRQ 0
> Capabilities: [80] Message Signalled Interrupts: Mask- 64bit-
> Queue=0/0 Enable-
> Capabilities: [90] Subsystem: 1854:005f
> Capabilities: [a0] Power Management version 2
>
> 00:1c.2 0604: 8086:27d4 (rev 02) (prog-if 00 [Normal decode])
> Flags: bus master, fast devsel, latency 0
> Bus: primary=00, secondary=03, subordinate=04, sec-latency=0
> I/O behind bridge: 00004000-00004fff
> Memory behind bridge: d6000000-d7ffffff
> Prefetchable memory behind bridge: 00000000d2000000-00000000d3ffffff
> Capabilities: [40] Express Root Port (Slot+) IRQ 0
> Capabilities: [80] Message Signalled Interrupts: Mask- 64bit-
> Queue=0/0 Enable-
> Capabilities: [90] Subsystem: 1854:005f
> Capabilities: [a0] Power Management version 2
>
> 00:1c.3 0604: 8086:27d6 (rev 02) (prog-if 00 [Normal decode])
> Flags: bus master, fast devsel, latency 0
> Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
> Memory behind bridge: d8100000-d81fffff
> Capabilities: [40] Express Root Port (Slot+) IRQ 0
> Capabilities: [80] Message Signalled Interrupts: Mask- 64bit-
> Queue=0/0 Enable-
> Capabilities: [90] Subsystem: 1854:005f
> Capabilities: [a0] Power Management version 2
>
> 00:1d.0 0c03: 8086:27c8 (rev 02) (prog-if 00 [UHCI])
> Subsystem: 1854:005f
> Flags: bus master, medium devsel, latency 0, IRQ 20
> I/O ports at 1800 [size=32]
>
> 00:1d.1 0c03: 8086:27c9 (rev 02) (prog-if 00 [UHCI])
> Subsystem: 1854:005f
> Flags: bus master, medium devsel, latency 0, IRQ 19
> I/O ports at 1820 [size=32]
>
> 00:1d.2 0c03: 8086:27ca (rev 02) (prog-if 00 [UHCI])
> Subsystem: 1854:005f
> Flags: bus master, medium devsel, latency 0, IRQ 18
> I/O ports at 1840 [size=32]
>
> 00:1d.3 0c03: 8086:27cb (rev 02) (prog-if 00 [UHCI])
> Subsystem: 1854:005f
> Flags: bus master, medium devsel, latency 0, IRQ 21
> I/O ports at 1860 [size=32]
>
> 00:1d.7 0c03: 8086:27cc (rev 02) (prog-if 20 [EHCI])
> Subsystem: 1854:005f
> Flags: bus master, medium devsel, latency 0, IRQ 20
> Memory at d8504000 (32-bit, non-prefetchable) [size=1K]
> Capabilities: [50] Power Management version 2
> Capabilities: [58] Debug port
>
> 00:1e.0 0604: 8086:2448 (rev e2) (prog-if 01 [Subtractive decode])
> Flags: bus master, fast devsel, latency 0
> Bus: primary=00, secondary=06, subordinate=0a, sec-latency=56
> I/O behind bridge: 00005000-00005fff
> Memory behind bridge: d8200000-d82fffff
> Prefetchable memory behind bridge: 0000000050000000-0000000053ffffff
> Capabilities: [50] Subsystem: 1854:005f
>
> 00:1f.0 0601: 8086:27b9 (rev 02)
> Subsystem: 1854:005f
> Flags: bus master, medium devsel, latency 0
> Capabilities: [e0] Vendor Specific Information
>
> 00:1f.1 0101: 8086:27df (rev 02) (prog-if 8a [Master SecP PriP])
> Subsystem: 1854:005f
> Flags: bus master, medium devsel, latency 0, IRQ 19
> I/O ports at 01f0 [size=8]
> I/O ports at 03f4 [size=1]
> I/O ports at 0170 [size=8]
> I/O ports at 0374 [size=1]
> I/O ports at 1880 [size=16]
>
> 00:1f.2 0106: 8086:27c5 (rev 02) (prog-if 01 [AHCI 1.0])
> Subsystem: 1854:005f
> Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 19
> I/O ports at 18c8 [size=8]
> I/O ports at 18ac [size=4]
> I/O ports at 18c0 [size=8]
> I/O ports at 18a8 [size=4]
> I/O ports at 18b0 [size=16]
> Memory at d8504400 (32-bit, non-prefetchable) [size=1K]
> Capabilities: [80] Message Signalled Interrupts: Mask- 64bit-
> Queue=0/0 Enable-
> Capabilities: [70] Power Management version 2
>
> 00:1f.3 0c05: 8086:27da (rev 02)
> Subsystem: 1854:005f
> Flags: medium devsel, IRQ 11
> I/O ports at 18e0 [size=32]
>
> 01:00.0 0300: 1002:7145 (prog-if 00 [VGA])
> Subsystem: 1854:005f
> Flags: bus master, fast devsel, latency 0, IRQ 16
> Memory at c8000000 (32-bit, prefetchable) [size=128M]
> I/O ports at 2000 [size=256]
> Memory at d8000000 (32-bit, non-prefetchable) [size=64K]
> [virtual] Expansion ROM at d8020000 [disabled] [size=128K]
> Capabilities: [50] Power Management version 2
> Capabilities: [58] Express Legacy Endpoint IRQ 0
> Capabilities: [80] Message Signalled Interrupts: Mask- 64bit+
> Queue=0/0 Enable-
>
> 02:00.0 0200: 11c1:ed00 (rev 02)
> Subsystem: 1854:005f
> Flags: bus master, fast devsel, latency 0, IRQ 10
> Memory at d4000000 (64-bit, non-prefetchable) [size=2M]
> [virtual] Expansion ROM at d0000000 [disabled] [size=128K]
> Capabilities: [40] Power Management version 2
> Capabilities: [48] Express Endpoint IRQ 0
> Capabilities: [5c] Message Signalled Interrupts: Mask- 64bit+
> Queue=0/0 Enable-
>
> 05:00.0 0280: 8086:4222 (rev 02)
> Subsystem: 8086:1001
> Flags: bus master, fast devsel, latency 0, IRQ 19
> Memory at d8100000 (32-bit, non-prefetchable) [size=4K]
> Capabilities: [c8] Power Management version 2
> Capabilities: [d0] Message Signalled Interrupts: Mask- 64bit+
> Queue=0/0 Enable-
> Capabilities: [e0] Express Legacy Endpoint IRQ 0
>
> 06:00.0 0607: 104c:8039
> Subsystem: 1854:005f
> Flags: bus master, medium devsel, latency 168, IRQ 16
> Memory at d8206000 (32-bit, non-prefetchable) [size=4K]
> Bus: primary=06, secondary=07, subordinate=0a, sec-latency=176
> Memory window 0: 50000000-53fff000 (prefetchable)
> Memory window 1: 54000000-57fff000
> I/O window 0: 00005000-000050ff
> I/O window 1: 00005400-000054ff
> 16-bit legacy interface ports at 0001
>
> 06:00.1 0c00: 104c:803a (prog-if 10 [OHCI])
> Subsystem: 1854:005f
> Flags: bus master, medium devsel, latency 32, IRQ 16
> Memory at d8205000 (32-bit, non-prefetchable) [size=2K]
> Memory at d8200000 (32-bit, non-prefetchable) [size=16K]
> Capabilities: [44] Power Management version 2
>
> 06:00.2 0180: 104c:803b
> Subsystem: 1854:005f
> Flags: bus master, medium devsel, latency 57, IRQ 16
> Memory at d8204000 (32-bit, non-prefetchable) [size=4K]
> Capabilities: [44] Power Management version 2
>
> 06:00.3 0805: 104c:803c
> Subsystem: 1854:005f
> Flags: bus master, medium devsel, latency 57, IRQ 16
> Memory at d8205800 (32-bit, non-prefetchable) [size=256]
> Capabilities: [80] Power Management version 2
>
> asoundconf list
> Names of available sound cards:
> Intel
>
> cat /etc/asound.conf ~/.asoundrc*
> <empty>
>
> dmesg
> [ 0.000000] Linux version 2.6.20-15-generic (root at vernadsky) (gcc
> version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 SMP Sat Apr 14 00:54:01 UTC 2007
> (Ubuntu 2.6.20-15.25-generic)
> [ 0.000000] BIOS-provided physical RAM map:
> [ 0.000000] sanitize start
> [ 0.000000] sanitize end
> [ 0.000000] copy_e820_map() start: 0000000000000000 size:
> 000000000009f800 end: 000000000009f800 type: 1
> [ 0.000000] copy_e820_map() type is E820_RAM
> [ 0.000000] copy_e820_map() start: 000000000009f800 size:
> 0000000000000800 end: 00000000000a0000 type: 2
> [ 0.000000] copy_e820_map() start: 00000000000dc000 size:
> 0000000000024000 end: 0000000000100000 type: 2
> [ 0.000000] copy_e820_map() start: 0000000000100000 size:
> 000000003fde0000 end: 000000003fee0000 type: 1
> [ 0.000000] copy_e820_map() type is E820_RAM
> [ 0.000000] copy_e820_map() start: 000000003fee0000 size:
> 0000000000020000 end: 000000003ff00000 type: 4
> [ 0.000000] copy_e820_map() start: 000000003ff00000 size:
> 0000000000100000 end: 0000000040000000 type: 2
> [ 0.000000] copy_e820_map() start: 00000000e0000000 size:
> 0000000010000000 end: 00000000f0000000 type: 2
> [ 0.000000] copy_e820_map() start: 00000000fec00000 size:
> 0000000000010000 end: 00000000fec10000 type: 2
> [ 0.000000] copy_e820_map() start: 00000000fed00000 size:
> 0000000000000400 end: 00000000fed00400 type: 2
> [ 0.000000] copy_e820_map() start: 00000000fed14000 size:
> 0000000000006000 end: 00000000fed1a000 type: 2
> [ 0.000000] copy_e820_map() start: 00000000fed1c000 size:
> 0000000000074000 end: 00000000fed90000 type: 2
> [ 0.000000] copy_e820_map() start: 00000000fee00000 size:
> 0000000000001000 end: 00000000fee01000 type: 2
> [ 0.000000] copy_e820_map() start: 00000000ff000000 size:
> 0000000001000000 end: 0000000100000000 type: 2
> [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
> [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
> [ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
> [ 0.000000] BIOS-e820: 0000000000100000 - 000000003fee0000 (usable)
> [ 0.000000] BIOS-e820: 000000003fee0000 - 000000003ff00000 (ACPI NVS)
> [ 0.000000] BIOS-e820: 000000003ff00000 - 0000000040000000 (reserved)
> [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
> [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
> [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
> [ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
> [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
> [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
> [ 0.000000] 126MB HIGHMEM available.
> [ 0.000000] 896MB LOWMEM available.
> [ 0.000000] found SMP MP-table at 000f6400
> [ 0.000000] Entering add_active_range(0, 0, 261856) 0 entries of 256
> used
> [ 0.000000] Zone PFN ranges:
> [ 0.000000] DMA 0 -> 4096
> [ 0.000000] Normal 4096 -> 229376
> [ 0.000000] HighMem 229376 -> 261856
> [ 0.000000] early_node_map[1] active PFN ranges
> [ 0.000000] 0: 0 -> 261856
> [ 0.000000] On node 0 totalpages: 261856
> [ 0.000000] DMA zone: 32 pages used for memmap
> [ 0.000000] DMA zone: 0 pages reserved
> [ 0.000000] DMA zone: 4064 pages, LIFO batch:0
> [ 0.000000] Normal zone: 1760 pages used for memmap
> [ 0.000000] Normal zone: 223520 pages, LIFO batch:31
> [ 0.000000] HighMem zone: 253 pages used for memmap
> [ 0.000000] HighMem zone: 32227 pages, LIFO batch:7
> [ 0.000000] DMI present.
> [ 0.000000] ACPI: RSDP (v000 PTLTD ) @
> 0x000f63d0
> [ 0.000000] ACPI: RSDT (v001 LGE LGPC 0x06040000 LTP 0x00000000)
> @ 0x3fee25e6
> [ 0.000000] ACPI: FADT (v001 LGE ROCKY 0x06040000 LOHR 0x0000005a)
> @ 0x3feecc78
> [ 0.000000] ACPI: MADT (v001 INTEL CALISTGA 0x06040000 LOHR 0x0000005a)
> @ 0x3feeccec
> [ 0.000000] ACPI: HPET (v001 INTEL CALISTGA 0x06040000 LOHR 0x0000005a)
> @ 0x3feecd54
> [ 0.000000] ACPI: MCFG (v001 INTEL CALISTGA 0x06040000 LOHR 0x0000005a)
> @ 0x3feecd8c
> [ 0.000000] ACPI: BOOT (v001 PTLTD $SBFTBL$ 0x06040000 LTP 0x00000001)
> @ 0x3feecfd8
> [ 0.000000] ACPI: SLIC (v001 LGE LGPC 0x06040000 YSB 0x00000001)
> @ 0x3feecdfa
> [ 0.000000] ACPI: MADT (v001 PTLTD APIC 0x06040000 LTP 0x00000000)
> @ 0x3feecf70
> [ 0.000000] ACPI: SSDT (v001 SataRe SataAhci 0x00001000 INTL 0x20050624)
> @ 0x3fee3ec6
> [ 0.000000] ACPI: SSDT (v001 LGE RKY_EGFX 0x00001000 INTL 0x20050624)
> @ 0x3fee39db
> [ 0.000000] ACPI: SSDT (v001 PmRef Cpu0Tst 0x00003000 INTL 0x20050624)
> @ 0x3fee2bc6
> [ 0.000000] ACPI: SSDT (v001 PmRef Cpu1Tst 0x00003000 INTL 0x20050624)
> @ 0x3fee2b20
> [ 0.000000] ACPI: SSDT (v001 PmRef CpuPm 0x00003000 INTL 0x20050624)
> @ 0x3fee263a
> [ 0.000000] ACPI: DSDT (v001 LGE ROCKY 0x06040000 INTL 0x20050309)
> @ 0x00000000
> [ 0.000000] ACPI: PM-Timer IO Port: 0x1008
> [ 0.000000] ACPI: Local APIC address 0xfee00000
> [ 0.000000] ACPI: 2 duplicate APIC table ignored.
> [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
> [ 0.000000] Processor #0 6:14 APIC version 20
> [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
> [ 0.000000] Processor #1 6:14 APIC version 20
> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
> [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
> [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI
> 0-23
> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
> [ 0.000000] ACPI: IRQ0 used by override.
> [ 0.000000] ACPI: IRQ2 used by override.
> [ 0.000000] ACPI: IRQ9 used by override.
> [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
> [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
> [ 0.000000] Using ACPI (MADT) for SMP configuration information
> [ 0.000000] Allocating PCI resources starting at 50000000 (gap:
> 40000000:a0000000)
> [ 0.000000] Detected 1862.142 MHz processor.
> [ 11.840834] Built 1 zonelists. Total pages: 259811
> [ 11.840837] Kernel command line:
> root=UUID=0ab33c61-1fd9-409b-a7bc-0ef7a8215895 ro quiet splash
> [ 11.840982] mapped APIC to ffffd000 (fee00000)
> [ 11.840984] mapped IOAPIC to ffffc000 (fec00000)
> [ 11.840987] Enabling fast FPU save and restore... done.
> [ 11.840989] Enabling unmasked SIMD FPU exception support... done.
> [ 11.840996] Initializing CPU#0
> [ 11.841070] PID hash table entries: 4096 (order: 12, 16384 bytes)
> [ 11.843655] Console: colour VGA+ 80x25
> [ 11.843954] Dentry cache hash table entries: 131072 (order: 7, 524288
> bytes)
> [ 11.844311] Inode-cache hash table entries: 65536 (order: 6, 262144
> bytes)
> [ 11.871661] Memory: 1027252k/1047424k available (1992k kernel code,
> 19456k reserved, 893k data, 328k init, 129920k highmem)
> [ 11.871670] virtual kernel memory layout:
> [ 11.871671] fixmap : 0xfff4e000 - 0xfffff000 ( 708 kB)
> [ 11.871673] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
> [ 11.871674] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
> [ 11.871675] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
> [ 11.871676] .init : 0xc03d7000 - 0xc0429000 ( 328 kB)
> [ 11.871677] .data : 0xc02f2264 - 0xc03d16d4 ( 893 kB)
> [ 11.871679] .text : 0xc0100000 - 0xc02f2264 (1992 kB)
> [ 11.871682] Checking if this processor honours the WP bit even in
> supervisor mode... Ok.
> [ 11.871828] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
> [ 11.871833] hpet0: 3 64-bit timers, 14318180 Hz
> [ 11.872837] Using HPET for base-timer
> [ 11.951695] Calibrating delay using timer specific routine.. 3728.17
> BogoMIPS (lpj=7456352)
> [ 11.951730] Security Framework v1.0.0 initialized
> [ 11.951737] SELinux: Disabled at boot.
> [ 11.951750] Mount-cache hash table entries: 512
> [ 11.951884] CPU: After generic identify, caps: bfe9fbff 00000000
> 00000000 00000000 0000c189 00000000 00000000
> [ 11.951892] monitor/mwait feature present.
> [ 11.951894] using mwait in idle threads.
> [ 11.951898] CPU: L1 I cache: 32K, L1 D cache: 32K
> [ 11.951900] CPU: L2 cache: 2048K
> [ 11.951902] CPU: Physical Processor ID: 0
> [ 11.951904] CPU: Processor Core ID: 0
> [ 11.951906] CPU: After all inits, caps: bfe9fbff 00000000 00000000
> 00002940 0000c189 00000000 00000000
> [ 11.951914] Compat vDSO mapped to ffffe000.
> [ 11.951917] Remapping vsyscall page to ffffe000
> [ 11.951928] Checking 'hlt' instruction... OK.
> [ 11.967762] SMP alternatives: switching to UP code
> [ 11.968086] Early unpacking initramfs... done
> [ 12.266622] ACPI: Core revision 20060707
> [ 12.266838] ACPI: Looking for DSDT in initramfs... file /DSDT.aml not
> found, using machine DSDT.
> [ 12.274301] CPU0: Intel(R) Core(TM) Duo CPU T2350 @ 1.86GHz
> stepping 0c
> [ 12.274321] SMP alternatives: switching to SMP code
> [ 12.274446] Booting processor 1/1 eip 3000
> [ 12.284849] Initializing CPU#1
> [ 12.362986] Calibrating delay using timer specific routine.. 3724.11
> BogoMIPS (lpj=7448229)
> [ 12.362992] CPU: After generic identify, caps: bfe9fbff 00000000
> 00000000 00000000 0000c189 00000000 00000000
> [ 12.362997] monitor/mwait feature present.
> [ 12.363000] CPU: L1 I cache: 32K, L1 D cache: 32K
> [ 12.363002] CPU: L2 cache: 2048K
> [ 12.363004] CPU: Physical Processor ID: 0
> [ 12.363005] CPU: Processor Core ID: 1
> [ 12.363007] CPU: After all inits, caps: bfe9fbff 00000000 00000000
> 00002940 0000c189 00000000 00000000
> [ 12.363494] CPU1: Intel(R) Core(TM) Duo CPU T2350 @ 1.86GHz
> stepping 0c
> [ 12.363515] Total of 2 processors activated (7452.29 BogoMIPS).
> [ 12.363714] ENABLING IO-APIC IRQs
> [ 12.363915] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
> [ 12.510731] checking TSC synchronization across 2 CPUs: passed.
> [ 0.003995] Brought up 2 CPUs
> [ 0.069295] migration_cost=42
> [ 0.069554] Booting paravirtualized kernel on bare hardware
> [ 0.069646] Time: 19:12:22 Date: 03/14/107
> [ 0.069677] NET: Registered protocol family 16
> [ 0.069767] EISA bus registered
> [ 0.069773] ACPI: bus type pci registered
> [ 0.069900] PCI: PCI BIOS revision 2.10 entry at 0xfd807, last bus=6
> [ 0.069902] PCI: Using configuration type 1
> [ 0.069904] Setting up standard PCI resources
> [ 0.078328] ACPI: Interpreter enabled
> [ 0.078330] ACPI: Using IOAPIC for interrupt routing
> [ 0.080391] ACPI: PCI Root Bridge [PCI0] (0000:00)
> [ 0.080397] PCI: Probing PCI hardware (bus 00)
> [ 0.081924] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
> [ 0.081929] PCI quirk: region 1180-11bf claimed by ICH6 GPIO
> [ 0.082252] Boot video device is 0000:01:00.0
> [ 0.083298] PCI: Transparent bridge - 0000:00:1e.0
> [ 0.083368] PCI: Bus #07 (-#0a) is hidden behind transparent bridge #06
> (-#06) (try 'pci=assign-busses')
> [ 0.083371] Please report the result to linux-kernel to fix this
> permanently
> [ 0.083447] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
> [ 0.086507] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
> [ 0.089276] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
> [ 0.089608] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
> [ 0.089863] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
> [ 0.090766] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
> [ 0.091314] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14
> 15)
> [ 0.091574] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14
> 15) *10
> [ 0.091826] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *7 10 12 14
> 15)
> [ 0.092086] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14
> 15)
> [ 0.092335] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14
> 15) *0, disabled.
> [ 0.092588] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14
> 15) *10
> [ 0.092840] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14
> 15) *11
> [ 0.093092] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14
> 15) *10
> [ 0.100105] ACPI: Power Resource [CTHT] (off)
> [ 0.100273] Linux Plug and Play Support v0.97 (c) Adam Belay
> [ 0.100287] pnp: PnP ACPI init
> [ 0.106321] pnp: PnP ACPI: found 13 devices
> [ 0.106326] PnPBIOS: Disabled by ACPI PNP
> [ 0.106368] PCI: Using ACPI for IRQ routing
> [ 0.106371] PCI: If a device doesn't work, try "pci=routeirq". If it
> helps, post a report
> [ 0.129306] NET: Registered protocol family 8
> [ 0.129308] NET: Registered protocol family 20
> [ 0.129622] pnp: 00:07: ioport range 0x6a0-0x6af has been reserved
> [ 0.129625] pnp: 00:07: ioport range 0x6b0-0x6ff has been reserved
> [ 0.129921] PCI: Bridge: 0000:00:01.0
> [ 0.129924] IO window: 2000-2fff
> [ 0.129928] MEM window: d8000000-d80fffff
> [ 0.129931] PREFETCH window: c8000000-cfffffff
> [ 0.129935] PCI: Bridge: 0000:00:1c.0
> [ 0.129938] IO window: 3000-3fff
> [ 0.129944] MEM window: d4000000-d5ffffff
> [ 0.129949] PREFETCH window: d0000000-d1ffffff
> [ 0.129955] PCI: Bridge: 0000:00:1c.2
> [ 0.129958] IO window: 4000-4fff
> [ 0.129964] MEM window: d6000000-d7ffffff
> [ 0.129969] PREFETCH window: d2000000-d3ffffff
> [ 0.129974] PCI: Bridge: 0000:00:1c.3
> [ 0.129976] IO window: disabled.
> [ 0.129982] MEM window: d8100000-d81fffff
> [ 0.129986] PREFETCH window: disabled.
> [ 0.129998] PCI: Bus 7, cardbus bridge: 0000:06:00.0
> [ 0.130000] IO window: 00005000-000050ff
> [ 0.130006] IO window: 00005400-000054ff
> [ 0.130011] PREFETCH window: 50000000-53ffffff
> [ 0.130017] MEM window: 54000000-57ffffff
> [ 0.130022] PCI: Bridge: 0000:00:1e.0
> [ 0.130025] IO window: 5000-5fff
> [ 0.130031] MEM window: d8200000-d82fffff
> [ 0.130036] PREFETCH window: 50000000-53ffffff
> [ 0.130053] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low)
> -> IRQ 16
> [ 0.130058] PCI: Setting latency timer of device 0000:00:01.0 to 64
> [ 0.130081] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low)
> -> IRQ 17
> [ 0.130087] PCI: Setting latency timer of device 0000:00:1c.0 to 64
> [ 0.130111] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low)
> -> IRQ 18
> [ 0.130117] PCI: Setting latency timer of device 0000:00:1c.2 to 64
> [ 0.130141] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low)
> -> IRQ 19
> [ 0.130147] PCI: Setting latency timer of device 0000:00:1c.3 to 64
> [ 0.130161] PCI: Setting latency timer of device 0000:00:1e.0 to 64
> [ 0.130177] ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 16 (level, low)
> -> IRQ 16
> [ 0.130210] NET: Registered protocol family 2
> [ 0.179728] IP route cache hash table entries: 32768 (order: 5, 131072
> bytes)
> [ 0.179830] TCP established hash table entries: 131072 (order: 8,
> 1048576 bytes)
> [ 0.180972] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
> [ 0.181529] TCP: Hash tables configured (established 131072 bind 65536)
> [ 0.181532] TCP reno registered
> [ 0.195778] checking if image is initramfs... it is
> [ 0.785205] Freeing initrd memory: 6742k freed
> [ 0.785387] Simple Boot Flag at 0x38 set to 0x1
> [ 0.785838] audit: initializing netlink socket (disabled)
> [ 0.785855] audit(1176577942.504:1): initialized
> [ 0.785949] highmem bounce pool size: 64 pages
> [ 0.786038] VFS: Disk quotas dquot_6.5.1
> [ 0.786058] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
> [ 0.786108] io scheduler noop registered
> [ 0.786111] io scheduler anticipatory registered
> [ 0.786113] io scheduler deadline registered
> [ 0.786124] io scheduler cfq registered (default)
> [ 0.786377] PCI: Setting latency timer of device 0000:00:01.0 to 64
> [ 0.786413] assign_interrupt_mode Found MSI capability
> [ 0.786416] Allocate Port Service[0000:00:01.0:pcie00]
> [ 0.786501] PCI: Setting latency timer of device 0000:00:1c.0 to 64
> [ 0.786558] assign_interrupt_mode Found MSI capability
> [ 0.786560] Allocate Port Service[0000:00:1c.0:pcie00]
> [ 0.786596] Allocate Port Service[0000:00:1c.0:pcie02]
> [ 0.786728] PCI: Setting latency timer of device 0000:00:1c.2 to 64
> [ 0.786785] assign_interrupt_mode Found MSI capability
> [ 0.786787] Allocate Port Service[0000:00:1c.2:pcie00]
> [ 0.786818] Allocate Port Service[0000:00:1c.2:pcie02]
> [ 0.786936] PCI: Setting latency timer of device 0000:00:1c.3 to 64
> [ 0.786993] assign_interrupt_mode Found MSI capability
> [ 0.786995] Allocate Port Service[0000:00:1c.3:pcie00]
> [ 0.787026] Allocate Port Service[0000:00:1c.3:pcie02]
> [ 0.787205] isapnp: Scanning for PnP cards...
> [ 1.141181] isapnp: No Plug & Play device found
> [ 1.162753] Real Time Clock Driver v1.12ac
> [ 1.162813] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ
> sharing enabled
> [ 1.162959] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
> [ 1.163555] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
> [ 1.163759] mice: PS/2 mouse device common for all mice
> [ 1.164309] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024
> blocksize
> [ 1.164526] input: Macintosh mouse button emulation as
> /class/input/input0
> [ 1.164557] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
> [ 1.164561] ide: Assuming 33MHz system bus speed for PIO modes; override
> with idebus=xx
> [ 1.164798] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at
> 0x60,0x64 irq 1,12
> [ 1.167648] i8042.c: Detected active multiplexing controller, rev 1.1.
> [ 1.170493] serio: i8042 KBD port at 0x60,0x64 irq 1
> [ 1.170497] serio: i8042 AUX0 port at 0x60,0x64 irq 12
> [ 1.170499] serio: i8042 AUX1 port at 0x60,0x64 irq 12
> [ 1.170502] serio: i8042 AUX2 port at 0x60,0x64 irq 12
> [ 1.170504] serio: i8042 AUX3 port at 0x60,0x64 irq 12
> [ 1.170612] EISA: Probing bus 0 at eisa.0
> [ 1.170621] Cannot allocate resource for EISA slot 1
> [ 1.170624] Cannot allocate resource for EISA slot 2
> [ 1.170627] Cannot allocate resource for EISA slot 3
> [ 1.170629] Cannot allocate resource for EISA slot 4
> [ 1.170631] Cannot allocate resource for EISA slot 5
> [ 1.170646] EISA: Detected 0 cards.
> [ 1.197924] input: AT Translated Set 2 keyboard as /class/input/input1
> [ 1.200778] TCP cubic registered
> [ 1.200788] NET: Registered protocol family 1
> [ 1.200809] Starting balanced_irq
> [ 1.200816] Using IPI No-Shortcut mode
> [ 1.201201] ACPI: (supports S0 S3 S4 S5)
> [ 1.201247] Magic number: 3:223:243
> [ 1.201538] Freeing unused kernel memory: 328k freed
> [ 1.201932] Time: tsc clocksource has been installed.
> [ 2.390477] Capability LSM initialized
> [ 2.422225] ACPI: Transitioning device [FAN0] to D3
> [ 2.422228] ACPI: Transitioning device [FAN0] to D3
> [ 2.422231] ACPI: Fan [FAN0] (off)
> [ 2.426615] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef]
> OemTableId [ Cpu0Ist] [20060707]
> [ 2.426924] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef]
> OemTableId [ Cpu0Cst] [20060707]
> [ 2.427412] ACPI: CPU0 (power states: C1[C1] C2[C2])
> [ 2.427416] ACPI: Processor [CPU0] (supports 8 throttling states)
> [ 2.427923] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef]
> OemTableId [ Cpu1Ist] [20060707]
> [ 2.428133] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef]
> OemTableId [ Cpu1Cst] [20060707]
> [ 2.428669] ACPI: CPU1 (power states: C1[C1] C2[C2])
> [ 2.428673] ACPI: Processor [CPU1] (supports 8 throttling states)
> [ 2.968000] ACPI: Thermal Zone [TZ0] (52 C)
> [ 2.968000] ACPI: Thermal Zone [TZ1] (50 C)
> [ 2.972000] ACPI: Thermal Zone [TZ2] (40 C)
> [ 2.976000] Time: hpet clocksource has been installed.
> [ 3.284000] usbcore: registered new interface driver usbfs
> [ 3.284000] usbcore: registered new interface driver hub
> [ 3.284000] usbcore: registered new device driver usb
> [ 3.288000] USB Universal Host Controller Interface driver v3.0
> [ 3.288000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low)
> -> IRQ 20
> [ 3.288000] PCI: Setting latency timer of device 0000:00:1d.0 to 64
> [ 3.288000] uhci_hcd 0000:00:1d.0: UHCI Host Controller
> [ 3.288000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus
> number 1
> [ 3.288000] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00001800
> [ 3.288000] usb usb1: configuration #1 chosen from 1 choice
> [ 3.288000] hub 1-0:1.0: USB hub found
> [ 3.288000] hub 1-0:1.0: 2 ports detected
> [ 3.336000] ieee1394: Initialized config rom entry `ip1394'
> [ 3.364000] SCSI subsystem initialized
> [ 3.396000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low)
> -> IRQ 19
> [ 3.396000] PCI: Setting latency timer of device 0000:00:1d.1 to 64
> [ 3.396000] uhci_hcd 0000:00:1d.1: UHCI Host Controller
> [ 3.396000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus
> number 2
> [ 3.396000] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001820
> [ 3.396000] usb usb2: configuration #1 chosen from 1 choice
> [ 3.396000] hub 2-0:1.0: USB hub found
> [ 3.396000] hub 2-0:1.0: 2 ports detected
> [ 3.424000] libata version 2.20 loaded.
> [ 3.500000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low)
> -> IRQ 18
> [ 3.500000] PCI: Setting latency timer of device 0000:00:1d.2 to 64
> [ 3.500000] uhci_hcd 0000:00:1d.2: UHCI Host Controller
> [ 3.500000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus
> number 3
> [ 3.500000] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001840
> [ 3.500000] usb usb3: configuration #1 chosen from 1 choice
> [ 3.500000] hub 3-0:1.0: USB hub found
> [ 3.500000] hub 3-0:1.0: 2 ports detected
> [ 3.604000] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 21 (level, low)
> -> IRQ 21
> [ 3.604000] PCI: Setting latency timer of device 0000:00:1d.3 to 64
> [ 3.604000] uhci_hcd 0000:00:1d.3: UHCI Host Controller
> [ 3.604000] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus
> number 4
> [ 3.604000] uhci_hcd 0000:00:1d.3: irq 21, io base 0x00001860
> [ 3.604000] usb usb4: configuration #1 chosen from 1 choice
> [ 3.604000] hub 4-0:1.0: USB hub found
> [ 3.604000] hub 4-0:1.0: 2 ports detected
> [ 3.708000] ACPI: PCI Interrupt 0000:06:00.1[A] -> GSI 16 (level, low)
> -> IRQ 16
> [ 3.756000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[16]
> MMIO=[d8205000-d82057ff] Max Packet=[2048] IR/IT contexts=[4/8]
> [ 3.760000] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low)
> -> IRQ 20
> [ 3.760000] PCI: Setting latency timer of device 0000:00:1d.7 to 64
> [ 3.760000] ehci_hcd 0000:00:1d.7: EHCI Host Controller
> [ 3.760000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus
> number 5
> [ 3.760000] ehci_hcd 0000:00:1d.7: debug port 1
> [ 3.760000] PCI: cache line size of 32 is not supported by device
> 0000:00:1d.7
> [ 3.760000] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xd8504000
> [ 3.764000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10
> Dec 2004
> [ 3.764000] usb usb5: configuration #1 chosen from 1 choice
> [ 3.764000] hub 5-0:1.0: USB hub found
> [ 3.764000] hub 5-0:1.0: 8 ports detected
> [ 3.868000] ahci 0000:00:1f.2: version 2.1
> [ 3.868000] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low)
> -> IRQ 19
> [ 4.524000] usb 3-1: new full speed USB device using uhci_hcd and
> address 3
> [ 4.768000] usb 3-1: configuration #1 chosen from 1 choice
> [ 4.872000] PCI: Setting latency timer of device 0000:00:1f.2 to 64
> [ 4.872000] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps
> 0x5 impl SATA mode
> [ 4.872000] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part
> [ 4.872000] ata1: SATA max UDMA/133 cmd 0xf88da500 ctl 0x00000000 bmdma
> 0x00000000 irq 19
> [ 4.872000] ata2: SATA max UDMA/133 cmd 0xf88da580 ctl 0x00000000 bmdma
> 0x00000000 irq 19
> [ 4.872000] ata3: SATA max UDMA/133 cmd 0xf88da600 ctl 0x00000000 bmdma
> 0x00000000 irq 19
> [ 4.872000] ata4: SATA max UDMA/133 cmd 0xf88da680 ctl 0x00000000 bmdma
> 0x00000000 irq 19
> [ 4.872000] scsi0 : ahci
> [ 5.012000] usb 4-1: new full speed USB device using uhci_hcd and
> address 2
> [ 5.184000] usb 4-1: configuration #1 chosen from 1 choice
> [ 5.356000] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> [ 5.356000] ata1.00: ata_hpa_resize 1: sectors = 234441648, hpa_sectors
> = 234441648
> [ 5.356000] ata1.00: ATA-7: FUJITSU MHV2120BH PL, 00000029, max UDMA/100
> [ 5.356000] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth
> 31/32)
> [ 5.360000] ata1.00: ata_hpa_resize 1: sectors = 234441648, hpa_sectors
> = 234441648
> [ 5.360000] ata1.00: configured for UDMA/100
> [ 5.360000] scsi1 : ahci
> [ 5.672000] ata2: SATA link down (SStatus 0 SControl 0)
> [ 5.672000] scsi2 : ahci
> [ 5.984000] ata3: SATA link down (SStatus 0 SControl 300)
> [ 5.984000] scsi3 : ahci
> [ 6.296000] ata4: SATA link down (SStatus 0 SControl 0)
> [ 6.296000] scsi 0:0:0:0: Direct-Access ATA FUJITSU MHV2120B
> 0000 PQ: 0 ANSI: 5
> [ 6.296000] ata_piix 0000:00:1f.1: version 2.10ac1
> [ 6.296000] ACPI: PCI Interrupt 0000:00:1f.1[B] -> GSI 19 (level, low)
> -> IRQ 19
> [ 6.296000] PCI: Setting latency timer of device 0000:00:1f.1 to 64
> [ 6.296000] ata5: PATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma
> 0x00011880 irq 14
> [ 6.296000] ata6: PATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma
> 0x00011888 irq 15
> [ 6.296000] scsi4 : ata_piix
> [ 6.300000] SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB)
> [ 6.300000] sda: Write Protect is off
> [ 6.300000] sda: Mode Sense: 00 3a 00 00
> [ 6.300000] SCSI device sda: write cache: enabled, read cache: enabled,
> doesn't support DPO or FUA
> [ 6.300000] SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB)
> [ 6.300000] sda: Write Protect is off
> [ 6.300000] sda: Mode Sense: 00 3a 00 00
> [ 6.300000] SCSI device sda: write cache: enabled, read cache: enabled,
> doesn't support DPO or FUA
> [ 6.300000] sda: sda1 sda2 < sda5 >
> [ 6.408000] sd 0:0:0:0: Attached scsi disk sda
> [ 6.412000] sd 0:0:0:0: Attached scsi generic sg0 type 0
> [ 6.600000] Attempting manual resume
> [ 6.600000] swsusp: Resume From Partition 8:5
> [ 6.600000] PM: Checking swsusp image.
> [ 6.600000] PM: Resume from disk failed.
> [ 6.616000] ata5.00: ATAPI, max UDMA/33
> [ 6.640000] kjournald starting. Commit interval 5 seconds
> [ 6.640000] EXT3-fs: mounted filesystem with ordered data mode.
> [ 6.784000] ata5.00: configured for UDMA/33
> [ 6.784000] scsi5 : ata_piix
> [ 6.784000] ata6: port disabled. ignoring.
> [ 6.788000] scsi 4:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-T10N
> PH03 PQ: 0 ANSI: 5
> [ 6.788000] scsi 4:0:0:0: Attached scsi generic sg1 type 5
> [ 18.316000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
> [ 18.400000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
> [ 18.772000] iTCO_vendor_support: vendor-support=0
> [ 18.776000] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01
> (11-Nov-2006)
> [ 18.784000] parport: PnPBIOS parport detected.
> [ 18.784000] parport0: PC-style at 0x378 (0x778), irq 5, dma 1
> [PCSPP,TRISTATE,COMPAT,ECP,DMA]
> [ 18.792000] Linux agpgart interface v0.102 (c) Dave Jones
> [ 18.796000] agpgart: Detected an Intel 945GM Chipset.
> [ 18.812000] agpgart: AGP aperture is 256M @ 0x0
> [ 18.872000] ACPI: PCI Interrupt 0000:06:00.2[A] -> GSI 16 (level, low)
> -> IRQ 16
> [ 18.904000] tifm_7xx1: sd card detected in socket 1
> [ 18.956000] Yenta: CardBus bridge found at 0000:06:00.0 [1854:005f]
> [ 18.956000] Yenta: Using INTVAL to route CSC interrupts to PCI
> [ 18.956000] Yenta: Routing CardBus interrupts to PCI
> [ 18.956000] Yenta TI: socket 0000:06:00.0, mfunc 0x01001002, devctl 0x64
> [ 19.084000] sdhci: Secure Digital Host Controller Interface driver
> [ 19.084000] sdhci: Copyright(c) Pierre Ossman
> [ 19.120000] ieee80211_crypt: registered algorithm 'NULL'
> [ 19.124000] Bluetooth: Core ver 2.11
> [ 19.124000] NET: Registered protocol family 31
> [ 19.124000] Bluetooth: HCI device and connection manager initialized
> [ 19.124000] Bluetooth: HCI socket layer initialized
> [ 19.124000] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2
> cdda tray
> [ 19.124000] Uniform CD-ROM driver Revision: 3.20
> [ 19.124000] sr 4:0:0:0: Attached scsi CD-ROM sr0
> [ 19.148000] Bluetooth: HCI USB driver ver 2.9
> [ 19.164000] ieee80211: 802.11 data/management/control stack, git-1.1.13
> [ 19.164000] ieee80211: Copyright (C) 2004-2005 Intel Corporation <
> jketreno at linux.intel.com>
> [ 19.188000] Yenta: ISA IRQ mask 0x0cd8, PCI irq 16
> [ 19.188000] Socket status: 30000006
> [ 19.188000] Yenta: Raising subordinate bus# of parent bus (#06) from #06
> to #0a
> [ 19.188000] pcmcia: parent PCI bridge I/O window: 0x5000 - 0x5fff
> [ 19.188000] cs: IO port probe 0x5000-0x5fff: clean.
> [ 19.188000] pcmcia: parent PCI bridge Memory window: 0xd8200000 -
> 0xd82fffff
> [ 19.188000] pcmcia: parent PCI bridge Memory window: 0x50000000 -
> 0x53ffffff
> [ 19.192000] sdhci: SDHCI controller found at 0000:06:00.3 [104c:803c]
> (rev 0)
> [ 19.192000] ACPI: PCI Interrupt 0000:06:00.3[A] -> GSI 16 (level, low)
> -> IRQ 16
> [ 19.192000] mmc1: SDHCI at 0xd8205800 irq 16 PIO
> [ 19.292000] usbcore: registered new interface driver hci_usb
> [ 19.320000] ipw3945: Intel(R) PRO/Wireless 3945 Network Connection
> driver for Linux, 1.2.0mp
> [ 19.320000] ipw3945: Copyright(c) 2003-2006 Intel Corporation
> [ 19.320000] ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 19 (level, low)
> -> IRQ 19
> [ 19.320000] PCI: Setting latency timer of device 0000:05:00.0 to 64
> [ 19.324000] ipw3945: Detected Intel PRO/Wireless 3945ABG Network
> Connection
> [ 19.420000] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x25a0b1, caps:
> 0xa04713/0x200000
> [ 19.464000] input: SynPS/2 Synaptics TouchPad as /class/input/input2
> [ 19.468000] iTCO_wdt: Found a ICH7-M TCO device (Version=2,
> TCOBASE=0x1060)
> [ 19.468000] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
> [ 19.536000] intel_rng: FWH not detected
> [ 19.588000] cs: IO port probe 0x100-0x3af: clean.
> [ 19.588000] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
> [ 19.592000] cs: IO port probe 0x820-0x8ff: clean.
> [ 19.592000] cs: IO port probe 0xc00-0xcf7: clean.
> [ 19.592000] cs: IO port probe 0xa00-0xaff: clean.
> [ 19.652000] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low)
> -> IRQ 22
> [ 19.652000] PCI: Setting latency timer of device 0000:00:1b.0 to 64
> [ 20.276000] lp0: using parport0 (interrupt-driven).
> [ 20.320000] Adding 3028212k swap on
> /dev/disk/by-uuid/d76d6749-0bf8-415a-ad77-ef234bd892ce. Priority:-1
> extents:1 across:3028212k
> [ 20.380000] EXT3 FS on sda1, internal journal
> [ 21.228000] ipw3945: Detected geography ABG (13 802.11bg channels, 23
> 802.11a channels)
> [ 21.236000] ACPI: AC Adapter [AC] (on-line)
> [ 21.300000] ACPI: Battery Slot [CMB0] (battery present)
> [ 21.312000] input: Power Button (FF) as /class/input/input3
> [ 21.312000] ACPI: Power Button (FF) [PWRF]
> [ 21.312000] input: Lid Switch as /class/input/input4
> [ 21.312000] ACPI: Lid Switch [LID0]
> [ 21.312000] input: Power Button (CM) as /class/input/input5
> [ 21.312000] ACPI: Power Button (CM) [PWRB]
> [ 21.312000] input: Sleep Button (CM) as /class/input/input6
> [ 21.312000] ACPI: Sleep Button (CM) [SLPB]
> [ 21.396000] Using specific hotkey driver
> [ 21.436000] No dock devices found.
> [ 21.492000] ibm_acpi: ec object not found
> [ 21.584000] ACPI: Video Device [EGFX] (multi-head: yes rom: no post:
> no)
> [ 21.604000] pcc_acpi: loading...
> [ 21.612000] wmi_add device=df8c2c00
> [ 21.612000] calling WQBA
> [ 21.612000] wmi_add device=df8c2800
> [ 21.612000] calling WQBA
> [ 26.588000] ppdev: user-space parallel port driver
> [ 27.948000] apm: BIOS not found.
> [ 28.608000] Bluetooth: L2CAP ver 2.8
> [ 28.608000] Bluetooth: L2CAP socket layer initialized
> [ 28.752000] fglrx: module license 'Proprietary. (C) 2002 - ATI
> Technologies, Starnberg, GERMANY' taints kernel.
> [ 28.756000] [fglrx] Maximum main memory to use for locked dma buffers:
> 928 MBytes.
> [ 28.756000] [fglrx] module loaded - fglrx 8.34.8 [Feb 20 2007] on minor
> 0
> [ 28.792000] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low)
> -> IRQ 16
> [ 28.880000] Bluetooth: RFCOMM socket layer initialized
> [ 28.880000] Bluetooth: RFCOMM TTY layer initialized
> [ 28.880000] Bluetooth: RFCOMM ver 1.8
> [ 30.764000] [fglrx] total GART = 130023424
> [ 30.764000] [fglrx] free GART = 114032640
> [ 30.764000] [fglrx] max single GART = 114032640
> [ 30.764000] [fglrx] total LFB = 134086656
> [ 30.764000] [fglrx] free LFB = 119697408
> [ 30.764000] [fglrx] max single LFB = 119697408
> [ 30.764000] [fglrx] total Inv = 0
> [ 30.764000] [fglrx] free Inv = 0
> [ 30.764000] [fglrx] max single Inv = 0
> [ 30.764000] [fglrx] total TIM = 0
> [ 61.828000] NET: Registered protocol family 10
> [ 61.828000] lo: Disabled Privacy Extensions
> [ 61.832000] ADDRCONF(NETDEV_UP): eth0: link is not ready
> [ 73.264000] NET: Registered protocol family 17
> [ 87.144000] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
> [ 87.208000] ieee80211_crypt: registered algorithm 'TKIP'
> [ 103.824000] eth0: no IPv6 routers present
> [ 5437.080000] ADDRCONF(NETDEV_UP): eth0: link is not ready
> [ 5487.664000] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
> [ 5506.064000] eth0: no IPv6 routers present
>
> (the system is running with the "acer" model here - it was the last thing i
> tried)
>
> cat /proc/interrupts
> CPU0 CPU1
> 0: 1640382 0 IO-APIC-edge timer
> 1: 19183 0 IO-APIC-edge i8042
> 5: 0 0 IO-APIC-edge parport0
> 8: 50 0 IO-APIC-edge rtc
> 9: 26620 0 IO-APIC-fasteoi acpi
> 12: 1253832 0 IO-APIC-edge i8042
> 14: 71297 0 IO-APIC-edge libata
> 15: 0 0 IO-APIC-edge libata
> 16: 396245 0 IO-APIC-fasteoi ohci1394, tifm_7xx1, yenta,
> sdhci:slot0, fglrx
> 18: 653469 0 IO-APIC-fasteoi uhci_hcd:usb3
> 19: 5552 290469 IO-APIC-fasteoi uhci_hcd:usb2, libata,
> ipw3945
> 20: 3 0 IO-APIC-fasteoi uhci_hcd:usb1, ehci_hcd:usb5
> 21: 31 0 IO-APIC-fasteoi uhci_hcd:usb4
> 22: 10936 0 IO-APIC-fasteoi HDA Intel
> NMI: 0 0
> LOC: 1623098 1623093
> ERR: 0
> MIS: 0
>
> Thanks in advance for any help you can give me. I have heard that people
> are discussing to use ndiswrapper for soundcards. Sound was running fine on
> Windows Vista. Any thoughts on using ndiswrapper?
>
> To unsubscribe from this bug, go to:
> https://bugs.launchpad.net/ubuntu/+source/linux/+bug/106634/+subscribe
>
--
Iskreno,
Filip Horvat
www.krinet.org
+385 91 54 88 101
--
LG P1 Express Dual (0x1854005f)'s internal speakers don't work
https://bugs.launchpad.net/bugs/106634
You received this bug notification because you are a member of Kernel
Bugs, which is subscribed to linux in ubuntu.
More information about the kernel-bugs
mailing list