[Bug 531462] [NEW] package linux-headers-2.6.31-19-generic 2.6.31-19.56 failed to install/upgrade: subprocess installed post-installation script returned error exit status 2
LaBlueGirl
rainey at imatix.com
Wed Mar 3 16:56:37 UTC 2010
Public bug reported:
Linux LBG 2.6.31-19-generic #56-Ubuntu SMP Thu Jan 28 01:26:53 UTC 2010
i686 GNU/Linux
Ubuntu 2.6.31-19.56-generic
[52870.284070] sd 2:0:1:0: [sda] Synchronizing SCSI cache
[52870.284314] sd 2:0:1:0: [sda] Stopping disk
[52870.607864] ACPI handle has no context!
[52870.624215] ath9k 0000:02:00.0: PCI INT A disabled
[52870.640229] sky2 0000:01:00.0: PME# disabled
[52870.656244] ata_piix 0000:00:1f.2: PCI INT B disabled
[52870.672223] ata_piix 0000:00:1f.1: PCI INT A disabled
[52870.672432] ata_piix 0000:00:1f.1: power state changed by ACPI to D3
[52870.672442] ehci_hcd 0000:00:1d.7: PCI INT A disabled
[52870.672449] uhci_hcd 0000:00:1d.3: PCI INT D disabled
[52870.672456] uhci_hcd 0000:00:1d.2: PCI INT C disabled
[52870.672463] uhci_hcd 0000:00:1d.1: PCI INT B disabled
[52870.672469] uhci_hcd 0000:00:1d.0: PCI INT A disabled
[52870.672486] HDA Intel 0000:00:1b.0: PCI INT A disabled
[52870.715600] i915 0000:00:02.0: PCI INT A disabled
[52870.728175] PM: suspend devices took 0.548 seconds
[52870.728440] ehci_hcd 0000:00:1d.7: PME# disabled
[52870.832045] ACPI: Preparing to enter system sleep state S3
[52870.880180] Disabling non-boot CPUs ...
[52870.984019] CPU 1 is now offline
[52870.984023] SMP alternatives: switching to UP code
[52870.989647] CPU0 attaching NULL sched-domain.
[52870.989650] CPU1 attaching NULL sched-domain.
[52870.989657] CPU0 attaching NULL sched-domain.
[52870.989845] CPU1 is down
[52870.989890] Extended CMOS year: 2000
[52870.989890] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[52870.989890] Back to C!
[52870.989890] CPU0: Thermal LVT vector (0xfa) already installed
[52870.989890] Extended CMOS year: 2000
[52870.989890] Enabling non-boot CPUs ...
[52870.989890] SMP alternatives: switching to SMP code
[52870.995429] Booting processor 1 APIC 0x1 ip 0x6000
[52870.989510] Initializing CPU#1
[52870.989510] Calibrating delay using timer specific routine.. 4322.65 BogoMIPS (lpj=8645303)
[52870.989510] CPU: L1 I cache: 32K, L1 D cache: 32K
[52870.989510] CPU: L2 cache: 4096K
[52870.989510] CPU: Physical Processor ID: 0
[52870.989510] CPU: Processor Core ID: 1
[52870.989510] mce: CPU supports 6 MCE banks
[52870.989510] CPU1: Thermal monitoring enabled (TM2)
[52870.989510] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
[52871.085762] CPU1: Intel(R) Core(TM)2 CPU T7400 @ 2.16GHz stepping 06
[52871.085841] CPU0 attaching NULL sched-domain.
[52871.089014] Switched to high resolution mode on CPU 1
[52871.100017] CPU0 attaching sched-domain:
[52871.100020] domain 0: span 0-1 level MC
[52871.100023] groups: 0 1
[52871.100027] CPU1 attaching sched-domain:
[52871.100028] domain 0: span 0-1 level MC
[52871.100030] groups: 1 0
[52871.101019] CPU1 is up
[52871.101022] ACPI: Waking up from system sleep state S3
[52871.524102] i915 0000:00:02.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
[52871.524111] i915 0000:00:02.0: restoring config space at offset 0x7 (was 0x0, writing 0x90400000)
[52871.524115] i915 0000:00:02.0: restoring config space at offset 0x6 (was 0x8, writing 0x80000008)
[52871.524118] i915 0000:00:02.0: restoring config space at offset 0x5 (was 0x1, writing 0x20e1)
[52871.524140] pci 0000:00:02.1: restoring config space at offset 0x4 (was 0x0, writing 0x90300000)
[52871.524145] pci 0000:00:02.1: restoring config space at offset 0x1 (was 0x900000, writing 0x900007)
[52871.524155] pci 0000:00:07.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
[52871.524165] pci 0000:00:07.0: restoring config space at offset 0x4 (was 0x0, writing 0x90444000)
[52871.524170] pci 0000:00:07.0: restoring config space at offset 0x1 (was 0xb00000, writing 0xb00002)
[52871.524193] HDA Intel 0000:00:1b.0: restoring config space at offset 0xf (was 0x100, writing 0x10a)
[52871.524213] HDA Intel 0000:00:1b.0: restoring config space at offset 0x4 (was 0x4, writing 0x90440004)
[52871.524219] HDA Intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x40)
[52871.524225] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100002)
[52871.524265] pcieport-driver 0000:00:1c.0: restoring config space at offset 0xa (was 0x0, writing 0xffffffff)
[52871.524270] pcieport-driver 0000:00:1c.0: restoring config space at offset 0x9 (was 0x10001, writing 0x90519051)
[52871.524276] pcieport-driver 0000:00:1c.0: restoring config space at offset 0x8 (was 0x0, writing 0x90209020)
[52871.524281] pcieport-driver 0000:00:1c.0: restoring config space at offset 0x7 (was 0x20000000, writing 0x1010)
[52871.524291] pcieport-driver 0000:00:1c.0: restoring config space at offset 0x3 (was 0x810000, writing 0x810040)
[52871.524298] pcieport-driver 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)
[52871.524354] pcieport-driver 0000:00:1c.1: restoring config space at offset 0xa (was 0x0, writing 0xffffffff)
[52871.524359] pcieport-driver 0000:00:1c.1: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1)
[52871.524365] pcieport-driver 0000:00:1c.1: restoring config space at offset 0x8 (was 0x0, writing 0x90109010)
[52871.524370] pcieport-driver 0000:00:1c.1: restoring config space at offset 0x7 (was 0x20000000, writing 0x200000f0)
[52871.524380] pcieport-driver 0000:00:1c.1: restoring config space at offset 0x3 (was 0x810000, writing 0x810040)
[52871.524387] pcieport-driver 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)
[52871.524578] ehci_hcd 0000:00:1d.7: PME# disabled
[52871.524630] pci 0000:00:1e.0: power state changed by ACPI to D0
[52871.524647] pci 0000:00:1e.0: restoring config space at offset 0xa (was 0x0, writing 0xffffffff)
[52871.524652] pci 0000:00:1e.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1)
[52871.524658] pci 0000:00:1e.0: restoring config space at offset 0x8 (was 0x0, writing 0x90009000)
[52871.524663] pci 0000:00:1e.0: restoring config space at offset 0x7 (was 0x22800000, writing 0x228000f0)
[52871.524676] pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007)
[52871.524764] ata_piix 0000:00:1f.1: power state changed by ACPI to D0
[52871.524769] ata_piix 0000:00:1f.1: restoring config space at offset 0xf (was 0x100, writing 0x10b)
[52871.524793] ata_piix 0000:00:1f.1: restoring config space at offset 0x1 (was 0x2800001, writing 0x2800005)
[52871.524810] ata_piix 0000:00:1f.2: restoring config space at offset 0xf (was 0x200, writing 0x20b)
[52871.524834] ata_piix 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00003, writing 0x2b00007)
[52871.524911] sky2 0000:01:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
[52871.524922] sky2 0000:01:00.0: restoring config space at offset 0xc (was 0x0, writing 0xfffe0000)
[52871.524939] sky2 0000:01:00.0: restoring config space at offset 0x6 (was 0x1, writing 0x1001)
[52871.524948] sky2 0000:01:00.0: restoring config space at offset 0x4 (was 0x4, writing 0x90200004)
[52871.524955] sky2 0000:01:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x40)
[52871.524963] sky2 0000:01:00.0: restoring config space at offset 0x1 (was 0x40100000, writing 0x100407)
[52871.525038] ath9k 0000:02:00.0: restoring config space at offset 0xf (was 0x1ff, writing 0x10b)
[52871.525065] ath9k 0000:02:00.0: restoring config space at offset 0x4 (was 0x4, writing 0x90100004)
[52871.525072] ath9k 0000:02:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x40)
[52871.525081] ath9k 0000:02:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007)
[52871.525119] ohci1394 0000:03:03.0: restoring config space at offset 0xf (was 0x180c0100, writing 0x180c010b)
[52871.525141] ohci1394 0000:03:03.0: restoring config space at offset 0x4 (was 0x0, writing 0x90000000)
[52871.525147] ohci1394 0000:03:03.0: restoring config space at offset 0x3 (was 0x0, writing 0xf810)
[52871.525154] ohci1394 0000:03:03.0: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900216)
[52878.663475] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[52878.663480] i915 0000:00:02.0: setting latency timer to 64
[52878.736850] [drm] LVDS-8: set mode 1280x800 19
[52878.769488] pci 0000:00:02.1: PME# disabled
[52878.769492] pci 0000:00:07.0: PME# disabled
[52878.769498] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[52878.769505] HDA Intel 0000:00:1b.0: setting latency timer to 64
[52878.769536] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[52878.769542] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[52878.769568] usb usb2: root hub lost power or was reset
[52878.769588] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[52878.769600] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[52878.769628] usb usb3: root hub lost power or was reset
[52878.769646] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[52878.769652] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[52878.769676] usb usb4: root hub lost power or was reset
[52878.769695] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[52878.769708] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[52878.769735] usb usb5: root hub lost power or was reset
[52878.769757] ehci_hcd 0000:00:1d.7: PME# disabled
[52878.769761] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[52878.769770] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[52878.769785] pci 0000:00:1e.0: setting latency timer to 64
[52878.769794] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[52878.769799] ata_piix 0000:00:1f.1: setting latency timer to 64
[52878.769815] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[52878.769822] ata_piix 0000:00:1f.2: setting latency timer to 64
[52878.769842] sky2 0000:01:00.0: PME# disabled
[52878.769893] ath9k 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[52878.826144] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[19] MMIO=[90000000-900007ff] Max Packet=[2048] IR/IT contexts=[8/8]
[52878.935906] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out
[52878.935909] ata1.00: ACPI cmd ef/03:44:00:00:00:a0 filtered out
[52878.952739] ata1.00: configured for UDMA/66
[52879.016547] ata3.01: ACPI cmd ef/03:0c:00:00:00:b0 filtered out
[52879.016550] ata3.01: ACPI cmd ef/03:45:00:00:00:b0 filtered out
[52879.065205] ata3.01: configured for UDMA/133
[52879.636199] sd 2:0:1:0: [sda] Starting disk
[52879.832104] usb 2-2: reset full speed USB device using uhci_hcd and address 2
[52879.990171] appletouch: Geyser mode initialized.
[52880.156110] usb 4-2: reset full speed USB device using uhci_hcd and address 2
[52880.306804] applesmc: device has already been initialized (0xe0, 0x00).
[52880.416109] usb 5-1: reset full speed USB device using uhci_hcd and address 15
[52880.480469] PM: resume devices took 8.956 seconds
[52880.480496] PM: Finishing wakeup.
[52880.480498] Restarting tasks ... done.
[52880.724119] usb 5-1: USB disconnect, address 15
[52880.724301] btusb_send_frame: hci0 urb e5e25000 submission failed
[52880.869489] sky2 eth0: enabling interface
[52880.869704] ADDRCONF(NETDEV_UP): eth0: link is not ready
[52880.904357] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[52881.216124] usb 5-1: new full speed USB device using uhci_hcd and address 16
[52881.397344] usb 5-1: configuration #1 chosen from 1 choice
[52881.417922] input: HID 05ac:1000 as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.0/input/input27
[52881.418068] generic-usb 0003:05AC:1000.0012: input,hidraw3: USB HID v1.11 Keyboard [HID 05ac:1000] on usb-0000:00:1d.3-1/input0
[52881.448896] input: HID 05ac:1000 as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.1/input/input28
[52881.449071] generic-usb 0003:05AC:1000.0013: input,hidraw4: USB HID v1.11 Mouse [HID 05ac:1000] on usb-0000:00:1d.3-1/input1
[52883.904204] usb 5-1: usbfs: USBDEVFS_CONTROL failed cmd hid2hci rqt 64 rq 0 len 0 ret -84
[52883.937211] usb 5-1: USB disconnect, address 16
[52884.673142] usb 5-1: new full speed USB device using uhci_hcd and address 17
[52884.866362] usb 5-1: configuration #1 chosen from 1 choice
[52895.041538] wlan0: authenticate with AP 00:24:b2:88:2f:50
[52895.045412] wlan0: authenticated
[52895.045415] wlan0: associate with AP 00:24:b2:88:2f:50
[52895.047821] wlan0: RX AssocResp from 00:24:b2:88:2f:50 (capab=0x431 status=0 aid=2)
[52895.047824] wlan0: associated
[52895.052239] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[52905.372021] wlan0: no IPv6 routers present
[53055.867196] [drm] TV-16: set mode NTSC 480i 0
[53056.033543] [drm] TV-16: set mode NTSC 480i 0
[53984.565303] [drm] TV-16: set mode NTSC 480i 0
[53984.730309] [drm] TV-16: set mode NTSC 480i 0
[55284.316141] sky2 eth0: disabling interface
[55284.536112] wlan0: deauthenticating by local choice (reason=3)
[55284.595624] wlan0: disassociating by local choice (reason=3)
[55285.264878] PM: Syncing filesystems ... done.
[55285.345854] PM: Preparing system for mem sleep
[55285.345861] Freezing user space processes ... (elapsed 0.00 seconds) done.
[55285.346851] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[55285.346891] PM: Entering mem sleep
[55285.346904] Suspending console(s) (use no_console_suspend to debug)
[55285.348483] btusb_bulk_complete: hci0 urb e5ded400 failed to resubmit (1)
[55285.349479] btusb_bulk_complete: hci0 urb e5deda80 failed to resubmit (1)
[55285.350470] btusb_intr_complete: hci0 urb e5ded200 failed to resubmit (1)
[55285.444126] sd 2:0:1:0: [sda] Synchronizing SCSI cache
[55285.444410] sd 2:0:1:0: [sda] Stopping disk
[55285.771157] ACPI handle has no context!
[55285.788215] ath9k 0000:02:00.0: PCI INT A disabled
[55285.804229] sky2 0000:01:00.0: PME# disabled
[55285.820244] ata_piix 0000:00:1f.2: PCI INT B disabled
[55285.836223] ata_piix 0000:00:1f.1: PCI INT A disabled
[55285.836432] ata_piix 0000:00:1f.1: power state changed by ACPI to D3
[55285.836442] ehci_hcd 0000:00:1d.7: PCI INT A disabled
[55285.836449] uhci_hcd 0000:00:1d.3: PCI INT D disabled
[55285.836456] uhci_hcd 0000:00:1d.2: PCI INT C disabled
[55285.836463] uhci_hcd 0000:00:1d.1: PCI INT B disabled
[55285.836470] uhci_hcd 0000:00:1d.0: PCI INT A disabled
[55285.836486] HDA Intel 0000:00:1b.0: PCI INT A disabled
[55285.873687] i915 0000:00:02.0: PCI INT A disabled
[55285.888173] PM: suspend devices took 0.544 seconds
[55285.888433] ehci_hcd 0000:00:1d.7: PME# disabled
[55285.992046] ACPI: Preparing to enter system sleep state S3
[55286.040175] Disabling non-boot CPUs ...
[55286.144018] CPU 1 is now offline
[55286.144021] SMP alternatives: switching to UP code
[55286.149598] CPU0 attaching NULL sched-domain.
[55286.149601] CPU1 attaching NULL sched-domain.
[55286.149608] CPU0 attaching NULL sched-domain.
[55286.149790] CPU1 is down
[55286.149834] Extended CMOS year: 2000
[55286.149834] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[55286.149834] Back to C!
[55286.149834] CPU0: Thermal LVT vector (0xfa) already installed
[55286.149834] Extended CMOS year: 2000
[55286.149834] Enabling non-boot CPUs ...
[55286.149834] SMP alternatives: switching to SMP code
[55286.155374] Booting processor 1 APIC 0x1 ip 0x6000
[55286.149468] Initializing CPU#1
[55286.149468] Calibrating delay using timer specific routine.. 4322.60 BogoMIPS (lpj=8645214)
[55286.149468] CPU: L1 I cache: 32K, L1 D cache: 32K
[55286.149468] CPU: L2 cache: 4096K
[55286.149468] CPU: Physical Processor ID: 0
[55286.149468] CPU: Processor Core ID: 1
[55286.149468] mce: CPU supports 6 MCE banks
[55286.149468] CPU1: Thermal monitoring enabled (TM2)
[55286.149468] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
[55286.245802] CPU1: Intel(R) Core(TM)2 CPU T7400 @ 2.16GHz stepping 06
[55286.245883] CPU0 attaching NULL sched-domain.
[55286.249014] Switched to high resolution mode on CPU 1
[55286.260017] CPU0 attaching sched-domain:
[55286.260020] domain 0: span 0-1 level MC
[55286.260023] groups: 0 1
[55286.260027] CPU1 attaching sched-domain:
[55286.260028] domain 0: span 0-1 level MC
[55286.260030] groups: 1 0
[55286.261019] CPU1 is up
[55286.261022] ACPI: Waking up from system sleep state S3
[55286.684101] i915 0000:00:02.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
[55286.684110] i915 0000:00:02.0: restoring config space at offset 0x7 (was 0x0, writing 0x90400000)
[55286.684114] i915 0000:00:02.0: restoring config space at offset 0x6 (was 0x8, writing 0x80000008)
[55286.684118] i915 0000:00:02.0: restoring config space at offset 0x5 (was 0x1, writing 0x20e1)
[55286.684139] pci 0000:00:02.1: restoring config space at offset 0x4 (was 0x0, writing 0x90300000)
[55286.684144] pci 0000:00:02.1: restoring config space at offset 0x1 (was 0x900000, writing 0x900007)
[55286.684154] pci 0000:00:07.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
[55286.684164] pci 0000:00:07.0: restoring config space at offset 0x4 (was 0x0, writing 0x90444000)
[55286.684169] pci 0000:00:07.0: restoring config space at offset 0x1 (was 0xb00000, writing 0xb00002)
[55286.684193] HDA Intel 0000:00:1b.0: restoring config space at offset 0xf (was 0x100, writing 0x10a)
[55286.684213] HDA Intel 0000:00:1b.0: restoring config space at offset 0x4 (was 0x4, writing 0x90440004)
[55286.684218] HDA Intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x40)
[55286.684224] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100002)
[55286.684264] pcieport-driver 0000:00:1c.0: restoring config space at offset 0xa (was 0x0, writing 0xffffffff)
[55286.684269] pcieport-driver 0000:00:1c.0: restoring config space at offset 0x9 (was 0x10001, writing 0x90519051)
[55286.684275] pcieport-driver 0000:00:1c.0: restoring config space at offset 0x8 (was 0x0, writing 0x90209020)
[55286.684280] pcieport-driver 0000:00:1c.0: restoring config space at offset 0x7 (was 0x20000000, writing 0x20001010)
[55286.684290] pcieport-driver 0000:00:1c.0: restoring config space at offset 0x3 (was 0x810000, writing 0x810040)
[55286.684297] pcieport-driver 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)
[55286.684353] pcieport-driver 0000:00:1c.1: restoring config space at offset 0xa (was 0x0, writing 0xffffffff)
[55286.684359] pcieport-driver 0000:00:1c.1: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1)
[55286.684364] pcieport-driver 0000:00:1c.1: restoring config space at offset 0x8 (was 0x0, writing 0x90109010)
[55286.684369] pcieport-driver 0000:00:1c.1: restoring config space at offset 0x7 (was 0x20000000, writing 0xf0)
[55286.684379] pcieport-driver 0000:00:1c.1: restoring config space at offset 0x3 (was 0x810000, writing 0x810040)
[55286.684386] pcieport-driver 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)
[55286.684578] ehci_hcd 0000:00:1d.7: PME# disabled
[55286.684630] pci 0000:00:1e.0: power state changed by ACPI to D0
[55286.684647] pci 0000:00:1e.0: restoring config space at offset 0xa (was 0x0, writing 0xffffffff)
[55286.684653] pci 0000:00:1e.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1)
[55286.684658] pci 0000:00:1e.0: restoring config space at offset 0x8 (was 0x0, writing 0x90009000)
[55286.684663] pci 0000:00:1e.0: restoring config space at offset 0x7 (was 0x22800000, writing 0x228000f0)
[55286.684676] pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007)
[55286.684764] ata_piix 0000:00:1f.1: power state changed by ACPI to D0
[55286.684769] ata_piix 0000:00:1f.1: restoring config space at offset 0xf (was 0x100, writing 0x10b)
[55286.684794] ata_piix 0000:00:1f.1: restoring config space at offset 0x1 (was 0x2800001, writing 0x2800005)
[55286.684810] ata_piix 0000:00:1f.2: restoring config space at offset 0xf (was 0x200, writing 0x20b)
[55286.684835] ata_piix 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00003, writing 0x2b00007)
[55286.684912] sky2 0000:01:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
[55286.684922] sky2 0000:01:00.0: restoring config space at offset 0xc (was 0x0, writing 0xfffe0000)
[55286.684939] sky2 0000:01:00.0: restoring config space at offset 0x6 (was 0x1, writing 0x1001)
[55286.684948] sky2 0000:01:00.0: restoring config space at offset 0x4 (was 0x4, writing 0x90200004)
[55286.684954] sky2 0000:01:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x40)
[55286.684963] sky2 0000:01:00.0: restoring config space at offset 0x1 (was 0x40100000, writing 0x100407)
[55286.685038] ath9k 0000:02:00.0: restoring config space at offset 0xf (was 0x1ff, writing 0x10b)
[55286.685065] ath9k 0000:02:00.0: restoring config space at offset 0x4 (was 0x4, writing 0x90100004)
[55286.685072] ath9k 0000:02:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x40)
[55286.685080] ath9k 0000:02:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007)
[55286.685119] ohci1394 0000:03:03.0: restoring config space at offset 0xf (was 0x180c0100, writing 0x180c010b)
[55286.685141] ohci1394 0000:03:03.0: restoring config space at offset 0x4 (was 0x0, writing 0x90000000)
[55286.685146] ohci1394 0000:03:03.0: restoring config space at offset 0x3 (was 0x0, writing 0xf810)
[55286.685153] ohci1394 0000:03:03.0: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900216)
[55294.183456] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[55294.183461] i915 0000:00:02.0: setting latency timer to 64
[55294.256830] [drm] LVDS-8: set mode 1280x800 19
[55294.289387] pci 0000:00:02.1: PME# disabled
[55294.289391] pci 0000:00:07.0: PME# disabled
[55294.289398] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[55294.289404] HDA Intel 0000:00:1b.0: setting latency timer to 64
[55294.289435] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[55294.289442] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[55294.289468] usb usb2: root hub lost power or was reset
[55294.289488] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[55294.289498] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[55294.289526] usb usb3: root hub lost power or was reset
[55294.289545] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[55294.289551] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[55294.289576] usb usb4: root hub lost power or was reset
[55294.289595] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[55294.289607] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[55294.289633] usb usb5: root hub lost power or was reset
[55294.289655] ehci_hcd 0000:00:1d.7: PME# disabled
[55294.289659] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[55294.289667] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[55294.289682] pci 0000:00:1e.0: setting latency timer to 64
[55294.289692] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[55294.289697] ata_piix 0000:00:1f.1: setting latency timer to 64
[55294.289712] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[55294.289719] ata_piix 0000:00:1f.2: setting latency timer to 64
[55294.289738] sky2 0000:01:00.0: PME# disabled
[55294.289788] ath9k 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[55294.346147] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[19] MMIO=[90000000-900007ff] Max Packet=[2048] IR/IT contexts=[8/8]
[55294.455917] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out
[55294.455920] ata1.00: ACPI cmd ef/03:44:00:00:00:a0 filtered out
[55294.472546] ata1.00: configured for UDMA/66
[55294.536466] ata3.01: ACPI cmd ef/03:0c:00:00:00:b0 filtered out
[55294.536469] ata3.01: ACPI cmd ef/03:45:00:00:00:b0 filtered out
[55294.586547] ata3.01: configured for UDMA/133
[55295.156201] sd 2:0:1:0: [sda] Starting disk
[55295.452111] usb 2-2: reset full speed USB device using uhci_hcd and address 2
[55295.666169] appletouch: Geyser mode initialized.
[55295.776109] usb 4-2: reset full speed USB device using uhci_hcd and address 2
[55295.926804] applesmc: device has already been initialized (0xe0, 0x00).
[55296.036109] usb 5-1: reset full speed USB device using uhci_hcd and address 17
[55296.100470] PM: resume devices took 9.416 seconds
[55296.100497] PM: Finishing wakeup.
[55296.100499] Restarting tasks ... done.
[55296.251884] sky2 eth0: enabling interface
[55296.252139] ADDRCONF(NETDEV_UP): eth0: link is not ready
[55296.288041] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[55296.344095] usb 5-1: USB disconnect, address 17
[55296.344214] btusb_send_frame: hci0 urb e5c83380 submission failed
[55296.892119] usb 5-1: new full speed USB device using uhci_hcd and address 18
[55297.073366] usb 5-1: configuration #1 chosen from 1 choice
[55297.093905] input: HID 05ac:1000 as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.0/input/input29
[55297.094048] generic-usb 0003:05AC:1000.0014: input,hidraw3: USB HID v1.11 Keyboard [HID 05ac:1000] on usb-0000:00:1d.3-1/input0
[55297.124972] input: HID 05ac:1000 as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.1/input/input30
[55297.125167] generic-usb 0003:05AC:1000.0015: input,hidraw4: USB HID v1.11 Mouse [HID 05ac:1000] on usb-0000:00:1d.3-1/input1
[55297.776202] usb 5-1: usbfs: USBDEVFS_CONTROL failed cmd hid2hci rqt 64 rq 0 len 0 ret -84
[55298.056158] usb 5-1: USB disconnect, address 18
[55298.360074] usb 5-1: new full speed USB device using uhci_hcd and address 19
[55298.558358] usb 5-1: configuration #1 chosen from 1 choice
[55310.309101] wlan0: authenticate with AP 00:24:b2:88:2f:50
[55310.310993] wlan0: authenticated
[55310.310998] wlan0: associate with AP 00:24:b2:88:2f:50
[55310.313778] wlan0: RX AssocResp from 00:24:b2:88:2f:50 (capab=0x431 status=0 aid=2)
[55310.313785] wlan0: associated
[55310.314355] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[55320.448061] wlan0: no IPv6 routers present
[72457.568123] ath9k: timeout (100000 us) on reg 0x806c: 0xdeadbeef & 0x01f00000 != 0x00000000
[72457.568161] ath9k: RX failed to go idle in 10 ms RXSM=0xdeadbeef
[92145.080150] wlan0: no probe response from AP 00:24:b2:88:2f:50 - disassociating
[92149.163891] wlan0: authenticate with AP 00:24:b2:88:2f:50
[92149.165974] wlan0: authenticated
[92149.165977] wlan0: associate with AP 00:24:b2:88:2f:50
[92149.168471] wlan0: RX ReassocResp from 00:24:b2:88:2f:50 (capab=0x431 status=0 aid=2)
[92149.168474] wlan0: associated
[129957.271866] ath9k: timeout (100000 us) on reg 0x806c: 0xdeadbeef & 0x01f00000 != 0x00000000
[129957.271904] ath9k: RX failed to go idle in 10 ms RXSM=0xdeadbeef
[134459.733571] CE: hpet increasing min_delta_ns to 22500 nsec
[142646.935735] ath9k: timeout (100000 us) on reg 0x806c: 0xdeadbeef & 0x01f00000 != 0x00000000
[142646.935775] ath9k: RX failed to go idle in 10 ms RXSM=0xdeadbeef
[146393.223761] ath9k: timeout (100000 us) on reg 0x806c: 0xdeadbeef & 0x01f00000 != 0x00000000
[146393.223800] ath9k: RX failed to go idle in 10 ms RXSM=0xdeadbeef
[146784.172423] ath9k: timeout (100000 us) on reg 0x806c: 0xdeadbeef & 0x01f00000 != 0x00000000
[146784.172462] ath9k: RX failed to go idle in 10 ms RXSM=0xdeadbeef
[146884.808233] ath9k: timeout (100000 us) on reg 0x806c: 0xdeadbeef & 0x01f00000 != 0x00000000
[146884.808271] ath9k: RX failed to go idle in 10 ms RXSM=0xdeadbeef
[146888.804920] ath9k: timeout (100000 us) on reg 0x806c: 0xdeadbeef & 0x01f00000 != 0x00000000
[146888.804958] ath9k: RX failed to go idle in 10 ms RXSM=0xdeadbeef
[147037.118366] ath9k: timeout (100000 us) on reg 0x806c: 0xdeadbeef & 0x01f00000 != 0x00000000
[147037.118405] ath9k: RX failed to go idle in 10 ms RXSM=0xdeadbeef
[147057.409783] ath9k: timeout (100000 us) on reg 0x806c: 0xdeadbeef & 0x01f00000 != 0x00000000
[147057.409822] ath9k: RX failed to go idle in 10 ms RXSM=0xdeadbeef
00:00.0 Host bridge [0600]: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub [8086:27a0] (rev 03)
Subsystem: Intel Corporation Device [8086:7270]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: [e0] Vendor Specific Information <?>
Kernel driver in use: agpgart-intel
Kernel modules: intel-agp
00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller [8086:27a2] (rev 03)
Subsystem: Intel Corporation Device [8086:7270]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at 90380000 (32-bit, non-prefetchable) [size=512K]
Region 1: I/O ports at 20e0 [size=8]
Region 2: Memory at 80000000 (32-bit, prefetchable) [size=256M]
Region 3: Memory at 90400000 (32-bit, non-prefetchable) [size=256K]
Capabilities: [90] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-
Address: 00000000 Data: 0000
Capabilities: [d0] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: i915
Kernel modules: i915
00:02.1 Display controller [0380]: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller [8086:27a6] (rev 03)
Subsystem: Intel Corporation Device [8086:7270]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at 90300000 (32-bit, non-prefetchable) [size=512K]
Capabilities: [d0] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:07.0 Performance counters [1101]: Intel Corporation Device [8086:27a3] (rev 03)
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 11
Region 0: Memory at 90444000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:1b.0 Audio device [0403]: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller [8086:27d8] (rev 02)
Subsystem: SigmaTel Device [8384:7680]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Interrupt: pin A routed to IRQ 22
Region 0: Memory at 90440000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #0, Speed unknown, Width x0, ASPM unknown, Latency L0 <64ns, L1 <1us
ClockPM- Suprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
Capabilities: [100] Virtual Channel <?>
Capabilities: [130] Root Complex Link <?>
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
00:1c.0 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 [8086:27d0] (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00001000-00001fff
Memory behind bridge: 90200000-902fffff
Prefetchable memory behind bridge: ffffffff90500000-00000000905fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
ExtTag- RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <256ns, L1 <4us
ClockPM- Suprise- LLActRep+ BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surpise+
Slot # 0, PowerLimit 6.500000; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet+ LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+
Address: fee0100c Data: 4159
Capabilities: [90] Subsystem: Gammagraphx, Inc. (or missing ID) Device [0000:0000]
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [100] Virtual Channel <?>
Capabilities: [180] Root Complex Link <?>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1c.1 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 [8086:27d2] (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
Memory behind bridge: 90100000-901fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
ExtTag- RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #2, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <256ns, L1 <4us
ClockPM- Suprise- LLActRep+ BwNot-
LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surpise+
Slot # 1, PowerLimit 6.500000; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet+ LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+
Address: fee0100c Data: 4161
Capabilities: [90] Subsystem: Gammagraphx, Inc. (or missing ID) Device [0000:0000]
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [100] Virtual Channel <?>
Capabilities: [180] Root Complex Link <?>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1d.0 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 [8086:27c8] (rev 02)
Subsystem: Intel Corporation Device [8086:7270]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 21
Region 4: I/O ports at 2080 [size=32]
Kernel driver in use: uhci_hcd
00:1d.1 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 [8086:27c9] (rev 02)
Subsystem: Intel Corporation Device [8086:7270]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at 2060 [size=32]
Kernel driver in use: uhci_hcd
00:1d.2 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 [8086:27ca] (rev 02)
Subsystem: Intel Corporation Device [8086:7270]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at 2040 [size=32]
Kernel driver in use: uhci_hcd
00:1d.3 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 [8086:27cb] (rev 02)
Subsystem: Intel Corporation Device [8086:7270]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 16
Region 4: I/O ports at 2020 [size=32]
Kernel driver in use: uhci_hcd
00:1d.7 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller [8086:27cc] (rev 02) (prog-if 20)
Subsystem: Intel Corporation Device [8086:7270]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 21
Region 0: Memory at 90445400 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Debug port: BAR=1 offset=00a0
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev e2) (prog-if 01)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=03, subordinate=03, sec-latency=32
Memory behind bridge: 90000000-900fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] Subsystem: Gammagraphx, Inc. (or missing ID) Device [0000:0000]
00:1f.0 ISA bridge [0601]: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge [8086:27b9] (rev 02)
Subsystem: Intel Corporation Device [8086:7270]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: [e0] Vendor Specific Information <?>
Kernel modules: iTCO_wdt, intel-rng
00:1f.1 IDE interface [0101]: Intel Corporation 82801G (ICH7 Family) IDE Controller [8086:27df] (rev 02) (prog-if 8a [Master SecP PriP])
Subsystem: Intel Corporation Device [8086:7270]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at 20b0 [size=16]
Kernel driver in use: ata_piix
00:1f.2 IDE interface [0101]: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA IDE Controller [8086:27c4] (rev 02) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: Intel Corporation Device [8086:7270]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at 20c8 [size=8]
Region 1: I/O ports at 20ec [size=4]
Region 2: I/O ports at 20c0 [size=8]
Region 3: I/O ports at 20e8 [size=4]
Region 4: I/O ports at 20a0 [size=16]
Region 5: Memory at 90445000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [70] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: ata_piix
00:1f.3 SMBus [0c05]: Intel Corporation 82801G (ICH7 Family) SMBus Controller [8086:27da] (rev 02)
Subsystem: Intel Corporation Device [8086:7270]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 11
Region 4: I/O ports at efa0 [size=32]
Kernel modules: i2c-i801
01:00.0 Ethernet controller [0200]: Marvell Technology Group Ltd. 88E8053 PCI-E Gigabit Ethernet Controller [11ab:4362] (rev 22)
Subsystem: Technical Corp. Device [1234:5678]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Interrupt: pin A routed to IRQ 26
Region 0: Memory at 90200000 (64-bit, non-prefetchable) [size=16K]
Region 2: I/O ports at 1000 [size=256]
Expansion ROM at 90500000 [disabled] [size=128K]
Capabilities: [48] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [50] Vital Product Data <?>
Capabilities: [5c] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable+
Address: 00000000fee0100c Data: 4181
Capabilities: [e0] Express (v1) Legacy Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 2048 bytes
DevSta: CorrErr+ UncorrErr+ FatalErr- UnsuppReq+ AuxPwr+ TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s, Latency L0 <256ns, L1 unlimited
ClockPM- Suprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 128 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
Capabilities: [100] Advanced Error Reporting <?>
Kernel driver in use: sky2
Kernel modules: sky2
02:00.0 Network controller [0280]: Atheros Communications Inc. AR5008 Wireless Network Adapter [168c:0024] (rev 01)
Subsystem: Apple Computer Inc. Device [106b:0087]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at 90100000 (64-bit, non-prefetchable) [size=64K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2- AuxCurrent=375mA PME(D0+,D1+,D2-,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-
Address: 00000000 Data: 0000
Capabilities: [60] Express (v1) Legacy Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr+ UncorrErr+ FatalErr- UnsuppReq+ AuxPwr- TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <64us
ClockPM- Suprise- LLActRep- BwNot-
LnkCtl: ASPM L1 Enabled; RCB 128 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
Capabilities: [90] MSI-X: Enable- Mask- TabSize=1
Vector table: BAR=0 offset=00000000
PBA: BAR=0 offset=00000000
Capabilities: [100] Advanced Error Reporting <?>
Capabilities: [140] Virtual Channel <?>
Kernel driver in use: ath9k
Kernel modules: ath9k
03:03.0 FireWire (IEEE 1394) [0c00]: Agere Systems FW322/323 [11c1:5811] (rev 61) (prog-if 10)
Subsystem: Agere Systems FW322/323 [11c1:5811]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B+ DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 248 (3000ns min, 6000ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at 90000000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME+
Kernel driver in use: ohci1394
Kernel modules: firewire-ohci, ohci1394
ProblemType: Package
AptOrdering:
sudo: Install
linux-headers-2.6.31-19-generic: Configure
linux-headers-generic: Configure
sudo: Configure
Architecture: i386
AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/dsp', '/dev/snd/pcmC0D0c', '/dev/snd/pcmC0D0p', '/dev/snd/by-path', '/dev/snd/controlC0', '/dev/snd/hwC0D0', '/dev/snd/pcmC0D1c', '/dev/snd/pcmC0D1p', '/dev/snd/seq', '/dev/snd/timer', '/dev/sequencer', '/dev/sequencer2'] failed with exit code 1:
CRDA: Error: [Errno 2] No such file or directory
Card0.Amixer.info:
Card hw:0 'Intel'/'HDA Intel at 0x90440000 irq 22'
Mixer name : 'SigmaTel STAC9221 A1'
Components : 'HDA:83847680,106b2200,00103401'
Controls : 21
Simple ctrls : 13
Date: Wed Mar 3 10:38:36 2010
DistroRelease: Ubuntu 9.10
ErrorMessage: subprocess installed post-installation script returned error exit status 2
HibernationDevice: RESUME=UUID=a0dc5896-ab5b-4948-a160-275cde7d5705
InstallationMedia: Ubuntu 9.10 "Karmic Koala" - Release i386 (20091028.5)
MachineType: Apple Inc. MacBook2,1
Package: linux-headers-2.6.31-19-generic 2.6.31-19.56
ProcCmdLine: BOOT_IMAGE=/boot/vmlinuz-2.6.31-19-generic root=UUID=7f4b5aee-d11a-4910-a816-291135e85819 ro quiet splash
ProcVersionSignature: Ubuntu 2.6.31-19.56-generic
RelatedPackageVersions:
linux-backports-modules-2.6.31-19-generic N/A
linux-firmware 1.26
SourcePackage: linux
Title: package linux-headers-2.6.31-19-generic 2.6.31-19.56 failed to install/upgrade: subprocess installed post-installation script returned error exit status 2
Uname: Linux 2.6.31-19-generic i686
dmi.bios.date: 06/27/07
dmi.bios.vendor: Apple Inc.
dmi.bios.version: MB21.88Z.00A5.B07.0706270922
dmi.board.asset.tag: Base Board Asset Tag
dmi.board.name: Mac-F4208CAA
dmi.board.vendor: Apple Inc.
dmi.board.version: PVT
dmi.chassis.asset.tag: Asset Tag
dmi.chassis.type: 10
dmi.chassis.vendor: Apple Inc.
dmi.chassis.version: Mac-F4208CAA
dmi.modalias: dmi:bvnAppleInc.:bvrMB21.88Z.00A5.B07.0706270922:bd06/27/07:svnAppleInc.:pnMacBook2,1:pvr1.0:rvnAppleInc.:rnMac-F4208CAA:rvrPVT:cvnAppleInc.:ct10:cvrMac-F4208CAA:
dmi.product.name: MacBook2,1
dmi.product.version: 1.0
dmi.sys.vendor: Apple Inc.
** Affects: linux (Ubuntu)
Importance: Undecided
Status: New
** Tags: apport-package i386
--
package linux-headers-2.6.31-19-generic 2.6.31-19.56 failed to install/upgrade: subprocess installed post-installation script returned error exit status 2
https://bugs.launchpad.net/bugs/531462
You received this bug notification because you are a member of Kernel
Bugs, which is subscribed to linux in ubuntu.
More information about the kernel-bugs
mailing list