[Bug 531696] Re: mc13892 LED driver oopses on trigger action
Bryan Wu
bryan.wu at canonical.com
Thu Mar 4 07:25:48 UTC 2010
Thanks Jeremy,
I tested this patch on my board, it fixed the oops.
--
root at babbage:/home/roc# echo mmc0 > /sys/class/leds/pmic_ledsb/trigger
root at babbage:/home/roc# df
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/sda1 152459812 3217744 141497536 3% /
none 234164 196 233968 1% /dev
none 238992 1068 237924 1% /dev/shm
none 238992 104 238888 1% /var/run
none 238992 0 238992 0% /var/lock
none 238992 0 238992 0% /lib/init/rw
/dev/mmcblk0p2 645280 625424 19856 97% /media/4B46-D221_
root at babbage:/home/roc# dmesg
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.31-605-imx51 (root at roc-desktop) (gcc version 4.4.1 (Sourcery G++ Lite 2009q3-67) ) #8 Thu Mar 4 14:13:15 CST 2010 (Ubuntu 2.6.31-605.8-imx51)
CPU: ARMv7 Processor [412fc081] revision 1 (ARMv7), cr=10c53c7f
CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
Machine: Freescale MX51 Babbage Board
Memory policy: ECC disabled, Data cache writeback
On node 0 totalpages: 122880
free_area_init_node: node 0, pgdat c06692dc, node_mem_map c06eb000
DMA zone: 128 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 16256 pages, LIFO batch:3
Normal zone: 832 pages used for memmap
Normal zone: 105664 pages, LIFO batch:31
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 121920
Kernel command line: root=UUID=e35b9b48-cd90-45ce-9dd5-3a186f4f9a7b ro console=tty0 console=ttymxc0,115200'
PID hash table entries: 2048 (order: 11, 8192 bytes)
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
allocated 2457600 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Memory: 480MB = 480MB total
Memory: 468132KB available (6104K code, 744K data, 184K init, 0K highmem)
SLUB: Genslabs=11, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
NR_IRQS:272
MXC IRQ initialized
Console: colour dummy device 80x30
console [tty0] enabled
Calibrating delay loop... 799.53 BogoMIPS (lpj=3997696)
Security Framework initialized
AppArmor: AppArmor initialized
Mount-cache hash table entries: 512
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
CPU: Testing write buffer coherency: ok
tmpfs: No value for mount option 'mode'
devtmpfs: initialized
regulator: core version 0.5
NET: Registered protocol family 16
CPU is i.MX51 Revision 2.0
MXC GPIO hardware
iomux_config_mux: Warning: iomux pin config changed, reg=fb0a8134, prev=0x1 new=0x3
IRAM READY
mxc_init_dvfs_per initialised
Using SDMA I.API
MXC DMA API initialized
bio: create slab <bio-0> at 0
SCSI subsystem initialized
libata version 3.00 loaded.
CSPI: mxc_spi-0 probed
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
MXC I2C driver
MXC I2C driver
MXC HS I2C driver
IPU DMFC NORMAL mode: 1(0~1), 5B(4,5), 5F(6,7)
PMIC Light driver loading...
Bluetooth: Core ver 2.15
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
NET: Registered protocol family 8
NET: Registered protocol family 20
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
mc13892 Rev 2.0 FinVer 0 detected
Initializing regulators for Babbage.
regulator: SW1: 600 <--> 1375 mV
regulator: SW2: 900 <--> 1850 mV
regulator: SW3: 1100 <--> 1850 mV
regulator: SW4: 1100 <--> 1850 mV
regulator: SWBST: 0 mV
regulator: VIOHI: 0 mV
regulator: VPLL: 1050 <--> 1800 mV
regulator: VDIG: 1650 mV
regulator: VSD: 1800 <--> 3150 mV
regulator: VUSB2: 2400 <--> 2775 mV
regulator: VVIDEO: 2775 mV
regulator: VAUDIO: 2300 <--> 3000 mV
regulator: VCAM: 2500 <--> 3000 mV fast normal
regulator: VGEN1: 1200 mV
regulator: VGEN2: 1200 <--> 3150 mV
regulator: VGEN3: 1800 <--> 2900 mV
regulator: VUSB: 0 mV
regulator: GPO1: 0 mV
regulator: GPO2: 0 mV
regulator: GPO3: 0 mV
regulator: GPO4: 0 mV
PMIC ADC start probe
PMIC Light successfully loaded
Device spi1.0 probed
AppArmor: AppArmor Filesystem Enabled
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
Switched to high resolution mode on CPU 0
NET: Registered protocol family 1
LPMode driver module loaded
Static Power Management for Freescale i.MX51
PM driver module loaded
sdram autogating driver module loaded
Bus freq driver module loaded
DVI monitor is primary
usb: Host 1 host (isp1504) registered
usb: DR host (utmi) registered
usb: DR gadget (utmi) registered
mxc_dvfs_core_probe
DVFS driver module loaded
i.MXC CPU frequency driver
DVFS PER driver module loaded
audit: initializing netlink socket (disabled)
type=2000 audit(0.720:1): initialized
Trying to unpack rootfs image as initramfs...
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
fuse init (API version 7.12)
msgmni has been set to 914
alg: No test for stdrng (krng)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
fbcvt: 1024x768 at 60: CVT Name - .786M3
mxc_ipu mxc_ipu: Channel already disabled 9
mxc_ipu mxc_ipu: Channel already uninitialized 9
IPU DMFC DP HIGH RESOLUTION: 1(0,1), 5B(2~5), 5F(6,7)
Console: switching to colour frame buffer device 128x48
fbcvt: 1024x768 at 60: CVT Name - .786M3
regulator: get() with no identifier
regulator: get() with no identifier
regulator: get() with no identifier
Freeing initrd memory: 9472K
mxci2c_wait_writefifo:wait error
Serial: MXC Internal UART driver
mxcintuart.0: ttymxc0 at MMIO 0x73fbc000 (irq = 31) is a Freescale i.MX
console [ttymxc0] enabled
mxcintuart.1: ttymxc1 at MMIO 0x73fc0000 (irq = 32) is a Freescale i.MX
mxcintuart.2: ttymxc2 at MMIO 0x7000c000 (irq = 33) is a Freescale i.MX
brd: module loaded
loop: module loaded
Fixed MDIO Bus: probed
FEC Ethernet Driver
fec: PHY @ 0x0, ID 0x0007c0c4 -- LAN8700
PPP generic driver version 2.4.2
MXC MTD nor Driver 2.0
MXC MTD nand Driver 3.0
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
fsl-ehci fsl-ehci.0: Freescale On-Chip EHCI Host Controller
fsl-ehci fsl-ehci.0: new USB bus registered, assigned bus number 1
fsl-ehci fsl-ehci.0: irq 14, io base 0x73f80200
fsl-ehci fsl-ehci.0: USB 2.0 started, EHCI 1.00
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
fsl-ehci fsl-ehci.1: Freescale On-Chip EHCI Host Controller
fsl-ehci fsl-ehci.1: new USB bus registered, assigned bus number 2
fsl-ehci fsl-ehci.1: irq 18, io base 0x73f80000
fsl-ehci fsl-ehci.1: USB 2.0 started, EHCI 1.00
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 1 port detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
ARC USBOTG Device Controller driver (1 August 2005)
udc: request mem region for fsl-usb2-udc failed
fsl-usb2-udc: probe of fsl-usb2-udc failed with error -16
mice: PS/2 mouse device common for all mice
MXC keypad loaded
clk: Unable to get requested clock: kpp_clk
input: mxckpd as /devices/virtual/input/input0
mc13892 rtc probe start
pmic_rtc pmic_rtc.1: rtc core: registered pmic_rtc as rtc0
mc13892 rtc probe succeed
i2c /dev entries driver
APM Battery Driver
MXC WatchDog Driver 2.0
clk: Unable to get requested clock: wdog_clk
MXC Watchdog # 0 Timer: initial timeout 60 sec
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel at redhat.com
device-mapper: multipath: version 1.1.0 loaded
device-mapper: multipath round-robin: version 1.0.0 loaded
cpuidle: using governor ladder
cpuidle: using governor menu
usb 1-1: new high speed USB device using fsl-ehci and address 2
usb 1-1: configuration #1 chosen from 1 choice
hub 1-1:1.0: USB hub found
pmic_battery: probe of pmic_battery.1 failed with error -1
SCC2: Driver Status is OK
Sahara HW Version is 0x27000410
ioctl pointer: c038dc40. mmap pointer: c038e114
In fsh_shw_smalloc (km): partition_base:de91c000 partition_base_phys: 1fffc000
writing UMID and MAP to secure the partition
VPU initialized
hub 1-1:1.0: 7 ports detected
mxsdhci: MXC Secure Digital Host Controller Interface driver
mxsdhci: MXC SDHCI Controller Driver.
mmc0: SDHCI detect irq 128 irq 1 INTERNAL DMA
mxsdhci: MXC SDHCI Controller Driver.
mmc1: SDHCI detect irq 134 irq 2 INTERNAL DMA
Registered led device: pmic_ledsr
Registered led device: pmic_ledsg
Registered led device: pmic_ledsb
Advanced Linux Sound Architecture Driver Version 1.0.20.
sgtl5000-i2c 1-000a: SGTL5000 revision 17
No device for DAI imx-ssi-1-0
No device for DAI imx-ssi-1-1
No device for DAI imx-ssi-2-0
No device for DAI imx-ssi-2-1
DMA Sound Buffers Allocated:UseIram=1 buf->addr=1ffe5000 buf->area=de8a8000 size=24576
DMA Sound Buffers Allocated:UseIram=1 buf->addr=acad8000 buf->area=fc16d000 size=24576
asoc: SGTL5000 <-> imx-ssi-2-0 mapping ok
mmc0: new SD card at address 81fe
mmcblk0: mmc0:81fe SD02G 1.84 GiB
mmcblk0: p1 p2
ALSA device list:
#0: imx-3stack (SGTL5000)
TCP cubic registered
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
NET: Registered protocol family 17
Bluetooth: L2CAP ver 2.13
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO (Voice Link) ver 0.6
Bluetooth: SCO socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
ThumbEE CPU extension supported.
VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 2
registered taskstats version 1
regulator_init_complete: incomplete constraints, leaving GPO4 on
regulator_init_complete: incomplete constraints, leaving GPO3 on
regulator_init_complete: incomplete constraints, leaving GPO2 on
regulator_init_complete: incomplete constraints, leaving GPO1 on
regulator_init_complete: incomplete constraints, leaving VUSB on
regulator_init_complete: incomplete constraints, leaving VGEN3 on
regulator_init_complete: incomplete constraints, leaving VGEN2 on
regulator_init_complete: incomplete constraints, leaving VGEN1 on
regulator_init_complete: incomplete constraints, leaving VCAM on
regulator_init_complete: incomplete constraints, leaving VAUDIO on
regulator_init_complete: incomplete constraints, leaving VUSB2 on
regulator_init_complete: incomplete constraints, leaving VSD on
regulator_init_complete: incomplete constraints, leaving VPLL on
regulator_init_complete: incomplete constraints, leaving VIOHI on
regulator_init_complete: incomplete constraints, leaving SWBST on
input: mxc_ts as /devices/virtual/input/input1
mxc input touchscreen loaded
usb 1-1.6: new high speed USB device using fsl-ehci and address 3
pmic_rtc pmic_rtc.1: setting system clock to 2010-03-04 06:44:04 UTC (1267685044)
Freeing init memory: 184K
usb 1-1.6: configuration #1 chosen from 1 choice
scsi0 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 3
usb-storage: waiting for device to settle before scanning
udev: starting version 151
usb-storage: device scan complete
scsi 0:0:0:0: Direct-Access TOSHIBA MK1655GSX 0009 PQ: 0 ANSI: 0
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 312581804 512-byte logical blocks: (160 GB/149 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 03 00 00 00
sd 0:0:0:0: [sda] Assuming drive cache: write through
sd 0:0:0:0: [sda] Assuming drive cache: write through
sda: sda1 sda2 < sda5 >
sd 0:0:0:0: [sda] Assuming drive cache: write through
sd 0:0:0:0: [sda] Attached SCSI disk
EXT4-fs (sda1): barriers enabled
kjournald2 starting: pid 196, dev sda1:8, commit interval 5 seconds
EXT4-fs (sda1): delayed allocation enabled
EXT4-fs: file extents enabled
EXT4-fs: mballoc enabled
EXT4-fs (sda1): mounted filesystem with ordered data mode
Adding 1397612k swap on /dev/sda5. Priority:-1 extents:1 across:1397612k
udev: starting version 151
type=1505 audit(1267685066.119:2): operation="profile_load" pid=264 name=/sbin/dhclient3
type=1505 audit(1267685066.209:3): operation="profile_load" pid=264 name=/usr/lib/NetworkManager/nm-dhcp-client.action
type=1505 audit(1267685066.209:4): operation="profile_load" pid=264 name=/usr/lib/connman/scripts/dhclient-script
EXT4-fs (sda1): warning: maximal mount count reached, running e2fsck is recommended
EXT4-fs (sda1): internal journal on sda1:8
type=1505 audit(1267685068.889:5): operation="profile_load" pid=506 name=/usr/share/gdm/guest-session/Xsession
type=1505 audit(1267685068.889:6): operation="profile_replace" pid=507 name=/sbin/dhclient3
type=1505 audit(1267685068.919:7): operation="profile_replace" pid=507 name=/usr/lib/NetworkManager/nm-dhcp-client.action
type=1505 audit(1267685068.919:8): operation="profile_replace" pid=507 name=/usr/lib/connman/scripts/dhclient-script
type=1505 audit(1267685068.999:9): operation="profile_load" pid=510 name=/usr/bin/evince
type=1505 audit(1267685069.079:10): operation="profile_load" pid=510 name=/usr/bin/evince-previewer
type=1505 audit(1267685069.119:11): operation="profile_load" pid=510 name=/usr/bin/evince-thumbnailer
eth0: config: auto-negotiation on, 100FDX, 100HDX, 10FDX, 10HDX.
DMFC high resolution has set, will not change
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
mxc_ipu mxc_ipu: Channel already disabled 9
mxc_ipu mxc_ipu: Channel already uninitialized 9
DMFC high resolution has set, will not change
eth0: no IPv6 routers present
root at babbage:/home/roc#
--
-Bryan
** Changed in: linux-fsl-imx51 (Ubuntu)
Importance: Undecided => High
** Changed in: linux-fsl-imx51 (Ubuntu)
Status: New => In Progress
--
mc13892 LED driver oopses on trigger action
https://bugs.launchpad.net/bugs/531696
You received this bug notification because you are a member of Kernel
Bugs, which is subscribed to linux-fsl-imx51 in ubuntu.
More information about the kernel-bugs
mailing list