[Bug 540974] [NEW] package linux-image-2.6.27-17-generic 2.6.27-17.46 failed to install/upgrade: le sous-processus post-installation script a retourné une erreur de sortie d'état 2
ccl
ccampagnac at orange.fr
Thu Mar 18 14:41:56 UTC 2010
Public bug reported:
Linux cc-desktop 2.6.27-17-generic #1 SMP Wed Jan 27 23:14:44 UTC 2010
i686 GNU/Linux
Ubuntu 2.6.27-17.45-generic
cc at cc-desktop:~/bug$ cat lspci-vnvn.log
00:00.0 Host bridge [0600]: VIA Technologies, Inc. VT8377 [KT400/KT600 AGP] Host Bridge [1106:3189] (rev 80)
Subsystem: VIA Technologies, Inc. Device [1106:0000]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 8
Region 0: Memory at e0000000 (32-bit, prefetchable) [size=32M]
Capabilities: [80] AGP version 3.5
Status: RQ=32 Iso- ArqSz=0 Cal=2 SBA+ ITACoh- GART64- HTrans- 64bit- FW+ AGP3- Rate=x1,x2,x4
Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=<none>
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: agpgart-via
Kernel modules: via-agp
00:01.0 PCI bridge [0604]: VIA Technologies, Inc. VT8237/VX700 PCI Bridge [1106:b198]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Memory behind bridge: d5e00000-d7efffff
Prefetchable memory behind bridge: d1d00000-d5cfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel modules: shpchp
00:0b.0 Multimedia video controller [0400]: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder [14f1:8800] (rev 05)
Subsystem: Hauppauge computer works Inc. Device [0070:9402]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (5000ns min, 13750ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at dc000000 (32-bit, non-prefetchable) [size=16M]
Capabilities: [44] Vital Product Data <?>
Capabilities: [4c] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: cx8800
Kernel modules: cx8800
00:0b.1 Multimedia controller [0480]: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder [Audio Port] [14f1:8811] (rev 05)
Subsystem: Hauppauge computer works Inc. Device [0070:9402]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (1000ns min, 63750ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at dd000000 (32-bit, non-prefetchable) [size=16M]
Capabilities: [4c] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: cx88_audio
Kernel modules: cx88-alsa
00:0b.2 Multimedia controller [0480]: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder [MPEG Port] [14f1:8802] (rev 05)
Subsystem: Hauppauge computer works Inc. Device [0070:9402]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (1500ns min, 22000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at de000000 (32-bit, non-prefetchable) [size=16M]
Capabilities: [4c] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: cx88-mpeg driver manager
Kernel modules: cx8802
00:0b.4 Multimedia controller [0480]: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder [IR Port] [14f1:8804] (rev 05)
Subsystem: Hauppauge computer works Inc. Device [0070:9402]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (1500ns min, 63750ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 10
Region 0: Memory at df000000 (32-bit, non-prefetchable) [size=16M]
Capabilities: [4c] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:10.0 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 80)
Subsystem: Micro-Star International Co., Ltd. Device [1462:7120]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 21
Region 4: I/O ports at e400 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:10.1 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 80)
Subsystem: Micro-Star International Co., Ltd. Device [1462:7120]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at e800 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:10.2 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 80)
Subsystem: Micro-Star International Co., Ltd. Device [1462:7120]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 32 bytes
Interrupt: pin C routed to IRQ 21
Region 4: I/O ports at ec00 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:10.3 USB Controller [0c03]: VIA Technologies, Inc. USB 2.0 [1106:3104] (rev 82) (prog-if 20)
Subsystem: Micro-Star International Co., Ltd. Device [1462:7120]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin D routed to IRQ 21
Region 0: Memory at dbffff00 (32-bit, non-prefetchable) [size=256]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:11.0 ISA bridge [0601]: VIA Technologies, Inc. VT8235 ISA Bridge [1106:3177]
Subsystem: VIA Technologies, Inc. Device [1106:0000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel modules: i2c-viapro, via-ircc
00:11.1 IDE interface [0101]: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE [1106:0571] (rev 06) (prog-if 8a [Master SecP PriP])
Subsystem: Micro-Star International Co., Ltd. Device [1462:7120]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32
Interrupt: pin A routed to IRQ 255
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8]
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1]
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1]
Region 4: I/O ports at fc00 [size=16]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: pata_via
Kernel modules: pata_via
00:11.5 Multimedia audio controller [0401]: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller [1106:3059] (rev 50)
Subsystem: Micro-Star International Co., Ltd. Device [1462:7120]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 22
Region 0: I/O ports at e000 [size=256]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: VIA 82xx Audio
Kernel modules: snd-via82xx
00:12.0 Ethernet controller [0200]: VIA Technologies, Inc. VT6102 [Rhine-II] [1106:3065] (rev 74)
Subsystem: Micro-Star International Co., Ltd. Device [1462:7120]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (750ns min, 2000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 23
Region 0: I/O ports at dc00 [size=256]
Region 1: Memory at dbfffe00 (32-bit, non-prefetchable) [size=256]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: via-rhine
Kernel modules: via-rhine
01:00.0 VGA compatible controller [0300]: nVidia Corporation NV5M64 [RIVA TNT2 Model 64/Model 64 Pro] [10de:002d] (rev 15)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (1250ns min, 250ns max)
Interrupt: pin A routed to IRQ 11
Region 0: Memory at d6000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at d2000000 (32-bit, prefetchable) [size=32M]
Expansion ROM at d7ef0000 [disabled] [size=64K]
Capabilities: [60] Power Management version 1
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [44] AGP version 2.0
Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA- ITACoh- GART64- HTrans- 64bit- FW- AGP3- Rate=x1,x2,x4
Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=<none>
Kernel modules: rivafb, nvidiafb, nvidia
cc at cc-desktop:~/bug$
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.27-17-generic (buildd at palmer) (gcc version 4.3.2 (Ubuntu 4.3.2-1ubuntu11) ) #1 SMP Wed Jan 27 23:14:44 UTC 2010 (Ubuntu 2.6.27-17.45-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000002fff0000 (usable)
[ 0.000000] BIOS-e820: 000000002fff0000 - 000000002fff8000 (ACPI data)
[ 0.000000] BIOS-e820: 000000002fff8000 - 0000000030000000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.3 present.
[ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working it around.
[ 0.000000] last_pfn = 0x2fff0 max_arch_pfn = 0x100000
[ 0.000000] kernel direct mapping tables up to 2fff0000 @ 10000-16000
[ 0.000000] RAMDISK: 2f80b000 - 2ffdfff7
[ 0.000000] ACPI: RSDP 000FA940, 0014 (r0 AMI )
[ 0.000000] ACPI: RSDT 2FFF0000, 002C (r1 AMIINT VIA_K7 10 MSFT 97)
[ 0.000000] ACPI: FACP 2FFF0030, 0081 (r1 AMIINT VIA_K7 11 MSFT 97)
[ 0.000000] ACPI: DSDT 2FFF0120, 32BF (r1 VIA VIA_K7 1000 MSFT 100000D)
[ 0.000000] ACPI: FACS 2FFF8000, 0040
[ 0.000000] ACPI: APIC 2FFF00C0, 0054 (r1 AMIINT VIA_K7 9 MSFT 97)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 767MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 2fff0000
[ 0.000000] low ram: 00000000 - 2fff0000
[ 0.000000] bootmap 00012000 - 00018000
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 002fff0000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0000100000 - 00005c59e0] TEXT DATA BSS ==> [0000100000 - 00005c59e0]
[ 0.000000] #4 [002f80b000 - 002ffdfff7] RAMDISK ==> [002f80b000 - 002ffdfff7]
[ 0.000000] #5 [00005c6000 - 00005c9000] INIT_PG_TABLE ==> [00005c6000 - 00005c9000]
[ 0.000000] #6 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
[ 0.000000] #7 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000]
[ 0.000000] #8 [0000012000 - 0000018000] BOOTMAP ==> [0000012000 - 0000018000]
[ 0.000000] found SMP MP-table at [c00fb930] 000fb930
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x0002fff0
[ 0.000000] HighMem 0x0002fff0 -> 0x0002fff0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0002fff0
0.000000] HighMem 0x0002fff0 -> 0x0002fff0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0002fff0
[ 0.000000] On node 0 totalpages: 196479
[ 0.000000] free_area_init_node: node 0, pgdat c048d700, node_mem_map c1000240
[ 0.000000] DMA zone: 3947 pages, LIFO batch:0
[ 0.000000] Normal zone: 190804 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] mapped APIC to ffffb000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 40000000 (gap: 30000000:cec00000)
[ 0.000000] PERCPU: Allocating 41628 bytes of per cpu data
[ 0.000000] NR_CPUS: 64, nr_cpu_ids: 1, nr_node_ids 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 194751
[ 0.000000] Kernel command line: root=UUID=6d624b56-74e0-4f60-8f3d-613f5a151772 ro quiet splash
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] TSC: PIT calibration confirmed by PMTIMER.
[ 0.000000] TSC: using PIT calibration value
[ 0.000000] Detected 1533.369 MHz processor.
[ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] console [tty0] enabled
[ 0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.004000] Memory: 765052k/786368k available (2581k kernel code, 20708k reserved, 1164k data, 428k init, 0k highmem)
[ 0.004000] virtual kernel memory layout:
[ 0.004000] fixmap : 0xffc77000 - 0xfffff000 (3616 kB)
[ 0.004000] pkmap : 0xff400000 - 0xff800000 (4096 kB)
[ 0.004000] vmalloc : 0xf0800000 - 0xff3fe000 ( 235 MB)
[ 0.004000] lowmem : 0xc0000000 - 0xefff0000 ( 767 MB)
0.004000] .init : 0xc04af000 - 0xc051a000 ( 428 kB)
[ 0.004000] .data : 0xc038567c - 0xc04a8680 (1164 kB)
[ 0.004000] .text : 0xc0100000 - 0xc038567c (2581 kB)
[ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated
[ 0.004000] SLUB: Genslabs=12, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.004018] Calibrating delay loop (skipped), value calculated using timer frequency.. 3066.73 BogoMIPS (lpj=6133476)
[ 0.004050] Security Framework initialized
[ 0.004062] SELinux: Disabled at boot.
[ 0.004103] AppArmor: AppArmor initialized
[ 0.004116] Mount-cache hash table entries: 512
[ 0.004371] Initializing cgroup subsys ns
[ 0.004378] Initializing cgroup subsys cpuacct
[ 0.004381] Initializing cgroup subsys memory
[ 0.004402] CPU: CLK_CTL MSR was 6003d22f. Reprogramming to 2003d22f
[ 0.004408] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.004412] CPU: L2 Cache: 256K (64 bytes/line)
[ 0.004434] Checking 'hlt' instruction... OK.
[ 0.020418] SMP alternatives: switching to UP code
[ 0.027272] Freeing SMP alternatives: 11k freed
[ 0.027279] ACPI: Core revision 20080609
[ 0.029369] ACPI: Checking initramfs for custom DSDT
[ 0.464328] ENABLING IO-APIC IRQs
[ 0.464640] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.504339] CPU0: AMD Athlon(tm) XP 1800+ stepping 01
[ 0.508031] Brought up 1 CPUs
[ 0.508031] Total of 1 processors activated (3066.73 BogoMIPS).
[ 0.508031] CPU0 attaching NULL sched-domain.
[ 0.508031] net_namespace: 840 bytes
[ 0.508031] Booting paravirtualized kernel on bare hardware
[ 0.508031] Time: 14:05:48 Date: 03/18/10
[ 0.508031] NET: Registered protocol family 16
[ 0.508031] EISA bus registered
[ 0.508031] ACPI: bus type pci registered
[ 0.509810] PCI: PCI BIOS revision 2.10 entry at 0xfdaf1, last bus=1
[ 0.509815] PCI: Using configuration type 1 for base access
[ 0.512119] ACPI: EC: Look up EC in DSDT
[ 0.520725] ACPI: Interpreter enabled
[ 0.520732] ACPI: (supports S0 S1 S4 S5)
[ 0.520753] ACPI: Using IOAPIC for interrupt routing
[ 0.527669] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.527794] PCI: 0000:00:00.0 reg 10 32bit mmio: [e0000000, e1ffffff]
[ 0.527883] pci 0000:00:01.0: supports D1
[ 0.527924] PCI: 0000:00:0b.0 reg 10 32bit mmio: [dc000000, dcffffff]
[ 0.527993] PCI: 0000:00:0b.1 reg 10 32bit mmio: [dd000000, ddffffff]
[ 0.528151] PCI: 0000:00:0b.2 reg 10 32bit mmio: [de000000, deffffff]
[ 0.528218] PCI: 0000:00:0b.4 reg 10 32bit mmio: [df000000, dfffffff]
[ 0.528306] PCI: 0000:00:10.0 reg 20 io port: [e400, e41f]
[ 0.528334] pci 0000:00:10.0: supports D1
0.528337] pci 0000:00:10.0: supports D2
[ 0.528341] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.528347] pci 0000:00:10.0: PME# disabled
[ 0.528387] PCI: 0000:00:10.1 reg 20 io port: [e800, e81f]
[ 0.528416] pci 0000:00:10.1: supports D1
[ 0.528418] pci 0000:00:10.1: supports D2
[ 0.528421] pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.528426] pci 0000:00:10.1: PME# disabled
[ 0.528467] PCI: 0000:00:10.2 reg 20 io port: [ec00, ec1f]
[ 0.528495] pci 0000:00:10.2: supports D1
[ 0.528498] pci 0000:00:10.2: supports D2
[ 0.528500] pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.528506] pci 0000:00:10.2: PME# disabled
[ 0.528531] PCI: 0000:00:10.3 reg 10 32bit mmio: [dbffff00, dbffffff]
[ 0.528575] pci 0000:00:10.3: supports D1
[ 0.528577] pci 0000:00:10.3: supports D2
[ 0.528580] pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.528585] pci 0000:00:10.3: PME# disabled
[ 0.528646] HPET not enabled in BIOS. You might try hpet=force boot option
[ 0.528655] pci 0000:00:11.0: quirk: region 0800-087f claimed by vt8235 PM
[ 0.528660] pci 0000:00:11.0: quirk: region 0400-040f claimed by vt8235 SMB
[ 0.528716] PCI: 0000:00:11.1 reg 20 io port: [fc00, fc0f]
[ 0.528776] PCI: 0000:00:11.5 reg 10 io port: [e000, e0ff]
[ 0.528822] pci 0000:00:11.5: supports D1
[ 0.528825] pci 0000:00:11.5: supports D2
[ 0.528853] PCI: 0000:00:12.0 reg 10 io port: [dc00, dcff]
[ 0.528860] PCI: 0000:00:12.0 reg 14 32bit mmio: [dbfffe00, dbfffeff]
[ 0.528901] pci 0000:00:12.0: supports D1
[ 0.528904] pci 0000:00:12.0: supports D2
[ 0.528907] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.528912] pci 0000:00:12.0: PME# disabled
[ 0.528958] PCI: 0000:01:00.0 reg 10 32bit mmio: [d6000000, d6ffffff]
[ 0.528965] PCI: 0000:01:00.0 reg 14 32bit mmio: [d2000000, d3ffffff]
[ 0.528985] PCI: 0000:01:00.0 reg 30 32bit mmio: [d7ef0000, d7efffff]
[ 0.529039] PCI: bridge 0000:00:01.0 32bit mmio: [d5e00000, d7efffff]
[ 0.529044] PCI: bridge 0000:00:01.0 32bit mmio pref: [d1d00000, d5cfffff]
[ 0.529053] bus 00 -> node 0
[ 0.529065] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.533157] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.533346] ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.533529] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.533711] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.533906] ACPI: Power Resource [URP1] (off)
[ 0.533964] ACPI: Power Resource [URP2] (off)
[ 0.534020] ACPI: Power Resource [FDDP] (off)
[ 0.534076] ACPI: Power Resource [LPTP] (off)
[ 0.534201] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 0.534275] pnp: PnP ACPI init
[ 0.534290] ACPI: bus type pnp registered
[ 0.538974] pnp: PnP ACPI: found 11 devices
[ 0.538980] ACPI: ACPI bus type pnp unregistered
[ 0.538987] PnPBIOS: Disabled by ACPI PNP
[ 0.539657] PCI: Using ACPI for IRQ routing
[ 0.539839] NET: Registered protocol family 8
[ 0.539839] NET: Registered protocol family 20
[ 0.540070] NetLabel: Initializing
[ 0.540074] NetLabel: domain hash size = 128
[ 0.540077] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.540101] NetLabel: unlabeled traffic allowed by default
[ 0.540516] tracer: 772 pages allocated for 65536 entries of 48 bytes
[ 0.540520] actual entries 65620
[ 0.540824] AppArmor: AppArmor Filesystem Enabled
[ 0.540849] ACPI: RTC can wake from S4
[ 0.540867] system 00:01: ioport range 0x290-0x297 has been reserved
[ 0.540867] system 00:01: ioport range 0x3f0-0x3f1 has been reserved
[ 0.540867] system 00:01: ioport range 0x4d0-0x4d1 has been reserved
[ 0.540867] system 00:01: ioport range 0x400-0x40f has been reserved
[ 0.540867] system 00:01: ioport range 0x800-0x87f has been reserved
[ 0.540867] system 00:01: iomem range 0xfee00000-0xfee00fff could not be reserved
[ 0.576423] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.576428] pci 0000:00:01.0: IO window: disabled
[ 0.576436] pci 0000:00:01.0: MEM window: 0xd5e00000-0xd7efffff
[ 0.576441] pci 0000:00:01.0: PREFETCH window: 0x000000d1d00000-0x000000d5cfffff
[ 0.576460] pci 0000:00:01.0: setting latency timer to 64
[ 0.576465] bus: 00 index 0 io port: [0, ffff]
[ 0.576469] bus: 00 index 1 mmio: [0, ffffffff]
[ 0.576472] bus: 01 index 0 mmio: [0, 0]
[ 0.576475] bus: 01 index 1 mmio: [d5e00000, d7efffff]
[ 0.576478] bus: 01 index 2 mmio: [d1d00000, d5cfffff]
[ 0.576481] bus: 01 index 3 mmio: [0, 0]
[ 0.576501] NET: Registered protocol family 2
[ 0.576698] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.577238] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.579316] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.580483] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.580489] TCP reno registered
[ 0.580670] NET: Registered protocol family 1
[ 0.580870] checking if image is initramfs... it is
[ 1.080094] Switched to high resolution mode on CPU 0
[ 1.528140] Freeing initrd memory: 8019k freed
[ 1.529409] audit: initializing netlink socket (disabled)
[ 1.529437] type=2000 audit(1268921148.528:1): initialized
[ 1.536816] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 1.540669] VFS: Disk quotas dquot_6.5.1
[ 1.540820] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.541008] msgmni has been set to 1510
[ 1.541223] io scheduler noop registered
[ 1.541228] io scheduler anticipatory registered
[ 1.541231] io scheduler deadline registered
[ 1.541249] io scheduler cfq registered (default)
[ 1.541269] PCI: VIA PCI bridge detected.Disabling DAC.
[ 1.541365] pci 0000:01:00.0: Boot video device
[ 1.541926] isapnp: Scanning for PnP cards...
[ 1.895588] isapnp: No Plug & Play device found
[ 1.963716] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[ 1.963882] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.965472] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.968389] brd: module loaded
[ 1.968519] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 1.968726] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.969172] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.969181] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.969986] mice: PS/2 mouse device common for all mice
[ 1.970233] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 1.970272] rtc0: alarms up to one year, y3k
[ 1.970471] EISA: Probing bus 0 at eisa.0
[ 1.970514] EISA: Detected 0 cards.
[ 1.970520] cpuidle: using governor ladder
[ 1.970524] cpuidle: using governor menu
[ 1.971305] TCP cubic registered
[ 1.971360] Using IPI No-Shortcut mode
[ 1.971784] registered taskstats version 1
[ 1.971950] Magic number: 2:331:81
[ 1.972282] rtc_cmos 00:03: setting system clock to 2010-03-18 14:05:49 UTC (1268921149)
[ 1.972288] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.972291] EDD information not available.
[ 1.973034] Freeing unused kernel memory: 428k freed
[ 1.973113] Write protecting the kernel text: 2584k
[ 1.973162] Write protecting the kernel read-only data: 940k
[ 1.993551] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 2.320086] fuse init (API version 7.9)
[ 2.391111] processor ACPI0007:00: registered as cooling_device0
[ 3.084253] Floppy drive(s): fd0 is 1.44M
[ 3.104255] FDC 0 is a post-1991 82077
[ 3.372202] usbcore: registered new interface driver usbfs
[ 3.372247] usbcore: registered new interface driver hub
[ 3.386934] No dock devices found.
[ 3.426767] usbcore: registered new device driver usb
[ 3.497230] SCSI subsystem initialized
[ 3.497443] ehci_hcd 0000:00:10.3: PCI INT D -> GSI 21 (level, low) -> IRQ 21
[ 3.497464] ehci_hcd 0000:00:10.3: EHCI Host Controller
[ 3.497546] ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 1
[ 3.497626] ehci_hcd 0000:00:10.3: irq 21, io mem 0xdbffff00
[ 3.501336] USB Universal Host Controller Interface driver v3.0
[ 3.507542] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
[ 3.508054] ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 3.508350] usb usb1: configuration #1 chosen from 1 choice
[ 3.508396] hub 1-0:1.0: USB hub found
[ 3.508418] hub 1-0:1.0: 6 ports detected
[ 3.545502] libata version 3.00 loaded.
[ 3.716606] uhci_hcd 0000:00:10.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 3.716626] uhci_hcd 0000:00:10.0: UHCI Host Controller
[ 3.716682] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
[ 3.716715] uhci_hcd 0000:00:10.0: irq 21, io base 0x0000e400
[ 3.716888] usb usb2: configuration #1 chosen from 1 choice
[ 3.716930] hub 2-0:1.0: USB hub found
[ 3.716948] hub 2-0:1.0: 2 ports detected
[ 3.828118] usb 1-6: new high speed USB device using ehci_hcd and address 2
[ 3.924544] uhci_hcd 0000:00:10.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 3.924565] uhci_hcd 0000:00:10.1: UHCI Host Controller
[ 3.924606] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
[ 3.924640] uhci_hcd 0000:00:10.1: irq 21, io base 0x0000e800
[ 3.924820] usb usb3: configuration #1 chosen from 1 choice
[ 3.924864] hub 3-0:1.0: USB hub found
[ 3.924881] hub 3-0:1.0: 2 ports detected
[ 3.973944] usb 1-6: configuration #1 chosen from 1 choice
[ 4.132527] uhci_hcd 0000:00:10.2: PCI INT C -> GSI 21 (level, low) -> IRQ 21
[ 4.132548] uhci_hcd 0000:00:10.2: UHCI Host Controller
[ 4.132593] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
[ 4.132626] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000ec00
[ 4.132795] usb usb4: configuration #1 chosen from 1 choice
[ 4.132839] hub 4-0:1.0: USB hub found
[ 4.132857] hub 4-0:1.0: 2 ports detected
[ 4.340569] pata_acpi 0000:00:11.1: can't derive routing for PCI INT A
[ 4.340671] pata_acpi 0000:00:11.1: can't derive routing for PCI INT A
[ 4.340728] via-rhine 0000:00:12.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 4.345076] eth0: VIA Rhine II at 0xdbfffe00, 00:0c:76:1f:87:5f, IRQ 23.
[ 4.345789] eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 45e1.
[ 4.353412] pata_via 0000:00:11.1: version 0.3.3
[ 4.353437] pata_via 0000:00:11.1: can't derive routing for PCI INT A
[ 4.355321] scsi0 : pata_via
[ 4.355600] scsi1 : pata_via
[ 4.358853] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14
[ 4.358859] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15
[ 4.528642] ata1.00: ATA-7: Maxtor 6E030L0, NAR61590, max UDMA/133
[ 4.528650] ata1.00: 60058656 sectors, multi 16: LBA
[ 4.528852] ata1.01: ATA-7: Maxtor 6Y060L0, YAR41VW0, max UDMA/133
[ 4.528857] ata1.01: 120103200 sectors, multi 16: LBA
[ 4.544436] ata1.00: configured for UDMA/133
[ 4.560548] ata1.01: configured for UDMA/133
[ 4.678171] usbcore: registered new interface driver libusual
[ 4.690537] Initializing USB Mass Storage driver...
[ 4.691793] scsi2 : SCSI emulation for USB Mass Storage devices
[ 4.691970] usbcore: registered new interface driver usb-storage
[ 4.691977] USB Mass Storage support registered.
[ 4.692200] usb-storage: device found at 2
[ 4.692204] usb-storage: waiting for device to settle before scanning
[ 4.732538] ata2.00: ATAPI: GoldStar CD-RW CED-8120B, 1.01, max MWDMA2
[ 4.732574] ata2.01: ATAPI: Memorex DVD-ROM DVD-632, 1M10, max UDMA/33
[ 4.748406] ata2.00: configured for MWDMA2
[ 4.764324] ata2.01: configured for UDMA/33
[ 4.764523] scsi 0:0:0:0: Direct-Access ATA Maxtor 6E030L0 NAR6 PQ: 0 ANSI: 5
[ 4.764860] scsi 0:0:0:0: Attached scsi generic sg0 type 0
[ 4.765845] scsi 0:0:1:0: Direct-Access ATA Maxtor 6Y060L0 YAR4 PQ: 0 ANSI: 5
[ 4.766128] scsi 0:0:1:0: Attached scsi generic sg1 type 0
[ 4.767340] scsi 1:0:0:0: CD-ROM GoldStar CD-RW CED-8120B 1.01 PQ: 0 ANSI: 5
[ 4.767619] scsi 1:0:0:0: Attached scsi generic sg2 type 5
[ 4.769451] scsi 1:0:1:0: CD-ROM Memorex DVD-ROM DVD-632 1M10 PQ: 0 ANSI: 5
[ 4.769760] scsi 1:0:1:0: Attached scsi generic sg3 type 5
[ 4.834328] Driver 'sd' needs updating - please use bus_type methods
[ 4.837852] sd 0:0:0:0: [sda] 60058656 512-byte hardware sectors (30750 MB)
[ 4.837885] sd 0:0:0:0: [sda] Write Protect is off
[ 4.837890] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.837931] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.838068] sd 0:0:0:0: [sda] 60058656 512-byte hardware sectors (30750 MB)
[ 4.838091] sd 0:0:0:0: [sda] Write Protect is off
[ 4.838095] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.838134] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.838141] sda:<4>Driver 'sr' needs updating - please use bus_type methods
[ 4.858387] sda1 sda2 < sda5 sda6 sda7 sda8 >
[ 4.909741] sd 0:0:0:0: [sda] Attached SCSI disk
[ 4.911860] sd 0:0:1:0: [sdb] 120103200 512-byte hardware sectors (61493 MB)
[ 4.911892] sd 0:0:1:0: [sdb] Write Protect is off
[ 4.911897] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[ 4.911938] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.912092] sd 0:0:1:0: [sdb] 120103200 512-byte hardware sectors (61493 MB)
[ 4.912116] sd 0:0:1:0: [sdb] Write Protect is off
[ 4.912120] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[ 4.912159] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.912167] sdb: sdb1
[ 4.916242] sd 0:0:1:0: [sdb] Attached SCSI disk
[ 4.935834] sr0: scsi3-mmc drive: 24x/32x writer cd/rw xa/form2 cdda tray
[ 4.935843] Uniform CD-ROM driver Revision: 3.20
[ 4.936117] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 4.943366] sr1: scsi3-mmc drive: 32x/32x cd/rw xa/form2 cdda tray
[ 4.943565] sr 1:0:1:0: Attached scsi CD-ROM sr1
[ 5.490140] PM: Starting manual resume from disk
[ 5.490149] PM: Resume from partition 8:5
[ 5.490152] PM: Checking hibernation image.
[ 5.490443] PM: Resume from disk failed.
[ 5.539005] kjournald starting. Commit interval 5 seconds
[ 5.539039] EXT3-fs: mounted filesystem with ordered data mode.
[ 9.692482] usb-storage: device scan complete
[ 9.693315] scsi 2:0:0:0: Direct-Access Generic STORAGE DEVICE 9321 PQ: 0 ANSI: 0
[ 9.694542] sd 2:0:0:0: [sdc] Attached SCSI removable disk
[ 9.694769] sd 2:0:0:0: Attached scsi generic sg4 type 0
[ 12.308666] udevd version 124 started
[ 13.308848] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 13.386968] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 13.709079] Linux agpgart interface v0.103
[ 14.000529] agpgart: Detected VIA KT400/KT400A/KT600 chipset
[ 14.004941] agpgart-via 0000:00:00.0: AGP aperture is 32M @ 0xe0000000
[ 14.185528] Linux video capture interface: v2.00
[ 14.288673] irda_init()
[ 14.288705] NET: Registered protocol family 23
[ 14.384428] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 14.396061] ACPI: Power Button (FF) [PWRF]
[ 14.396311] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
[ 14.412041] ACPI: Power Button (CM) [PWRB]
[ 14.412313] input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4
[ 14.424038] ACPI: Sleep Button (CM) [SLPB]
[ 14.720302] cx88/0: cx2388x v4l2 driver version 0.0.6 loaded
[ 14.721442] cx8800 0000:00:0b.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 14.726104] cx88[0]: subsystem: 0070:9402, board: Hauppauge WinTV-HVR1100 DVB-T/Hybrid [card=40,autodetected]
[ 14.726111] cx88[0]: TV tuner type 63, Radio tuner type -1
[ 14.726364] cx88/2: cx2388x MPEG-TS Driver Manager version 0.0.6 loaded
[ 15.226091] nvidia: module license 'NVIDIA' taints kernel.
[ 15.386818] NVRM: The NVIDIA RIVA TNT2 Model 64/Model 64 Pro GPU installed in this system is
[ 15.386821] NVRM: supported through the NVIDIA Legacy drivers. Please
[ 15.386824] NVRM: visit http://www.nvidia.com/object/unix.html for more
[ 15.386826] NVRM: information. The 1.0--231769640 NVIDIA driver will ignore
[ 15.386828] NVRM: this GPU. Continuing probe...
[ 15.386838] NVRM: No NVIDIA graphics adapter found!
[ 15.524877] tuner' 0-0061: chip found @ 0xc2 (cx88[0])
[ 15.525815] tuner' 0-0063: chip found @ 0xc6 (cx88[0])
[ 15.700850] tveeprom 0-0050: Hauppauge model 94009, rev C2A0, serial# 279656
[ 15.700858] tveeprom 0-0050: MAC address is 00-0D-FE-04-44-68
[ 15.700863] tveeprom 0-0050: tuner model is Philips FMD1216ME (idx 100, type 63)
[ 15.700868] tveeprom 0-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) ATSC/DVB Digital (eeprom 0xf4)
[ 15.700873] tveeprom 0-0050: audio processor is CX882 (idx 33)
[ 15.700877] tveeprom 0-0050: decoder processor is CX882 (idx 25)
[ 15.700881] tveeprom 0-0050: has radio, has IR receiver, has no IR transmitter
[ 15.700885] cx88[0]: hauppauge eeprom: model=94009
[ 15.914838] parport_pc 00:0a: reported by Plug and Play ACPI
[ 15.914942] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[ 16.257020] tuner-simple 0-0061: creating new instance
[ 16.257029] tuner-simple 0-0061: type set to 63 (Philips FMD1216ME MK3 Hybrid Tuner)
[ 16.258669] input: cx88 IR (Hauppauge WinTV-HVR110 as /devices/pci0000:00/0000:00:0b.0/input/input5
[ 16.276082] cx88[0]/0: found at 0000:00:0b.0, rev: 5, irq: 18, latency: 32, mmio: 0xdc000000
[ 16.276404] cx88[0]/0: registered device video0 [v4l2]
[ 16.276457] cx88[0]/0: registered device vbi0
[ 16.276510] cx88[0]/0: registered device radio0
[ 16.281122] cx88[0]/2: cx2388x 8802 Driver Manager
[ 16.281153] cx88-mpeg driver manager 0000:00:0b.2: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 16.281165] cx88[0]/2: found at 0000:00:0b.2, rev: 5, irq: 18, latency: 32, mmio: 0xde000000
[ 16.281271] ACPI: I/O resource vt596_smbus [0x400-0x407] conflicts with ACPI region SMOV [0x400-0x406]
[ 16.281275] ACPI: Device needs an ACPI driver
[ 16.626873] cx88/2: cx2388x dvb driver version 0.0.6 loaded
[ 16.626881] cx88/2: registering cx8802 driver, type: dvb access: shared
[ 16.626888] cx88[0]/2: subsystem: 0070:9402, board: Hauppauge WinTV-HVR1100 DVB-T/Hybrid [card=40]
[ 16.626894] cx88[0]/2: cx2388x based DVB/ATSC card
[ 16.848393] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 16.916298] cx2388x alsa driver version 0.0.6 loaded
[ 16.916376] cx88_audio 0000:00:0b.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 16.916430] cx88[0]/1: CX88x/0: ALSA support for cx2388x boards
[ 16.946954] tuner-simple 0-0061: attaching existing instance
[ 16.946962] tuner-simple 0-0061: type set to 63 (Philips FMD1216ME MK3 Hybrid Tuner)
[ 16.949963] DVB: registering new adapter (cx88[0])
[ 16.949970] DVB: registering frontend 0 (Conexant CX22702 DVB-T)...
[ 17.787248] input: ImExPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input7
[ 18.137524] VIA 82xx Audio 0000:00:11.5: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 18.137691] VIA 82xx Audio 0000:00:11.5: setting latency timer to 64
[ 22.277452] lp0: using parport0 (interrupt-driven).
[ 22.505854] Adding 1461872k swap on /dev/sda5. Priority:-1 extents:1 across:1461872k
[ 23.113458] EXT3 FS on sda6, internal journal
[ 24.199734] kjournald starting. Commit interval 5 seconds
[ 24.199999] EXT3 FS on sda8, internal journal
[ 24.200025] EXT3-fs: mounted filesystem with ordered data mode.
[ 24.236151] kjournald starting. Commit interval 5 seconds
[ 24.236350] EXT3 FS on sda7, internal journal
[ 24.236359] EXT3-fs: mounted filesystem with ordered data mode.
[ 25.140352] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 26.850182] warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use)
[ 26.964132] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[ 26.964143] apm: overridden by ACPI.
[ 27.145844] ppdev: user-space parallel port driver
[ 34.209456] Bluetooth: Core ver 2.13
[ 34.212447] NET: Registered protocol family 31
[ 34.212456] Bluetooth: HCI device and connection manager initialized
[ 34.212463] Bluetooth: HCI socket layer initialized
[ 34.234385] Bluetooth: L2CAP ver 2.11
[ 34.234394] Bluetooth: L2CAP socket layer initialized
[ 34.249461] Bluetooth: SCO (Voice Link) ver 0.6
[ 34.249470] Bluetooth: SCO socket layer initialized
[ 34.278923] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 34.278933] Bluetooth: BNEP filters: protocol multicast
[ 34.303519] Bridge firewalling registered
[ 34.328951] Bluetooth: RFCOMM socket layer initialized
[ 34.329913] Bluetooth: RFCOMM TTY layer initialized
[ 34.329920] Bluetooth: RFCOMM ver 1.10
[ 38.461365] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 38.735441] NET: Registered protocol family 17
[ 44.793551] NET: Registered protocol family 10
[ 44.796821] lo: Disabled Privacy Extensions
[ 54.924012] eth0: no IPv6 routers present
[ 138.564689] ppdev0: registered pardevice
[ 138.612300] ppdev0: unregistered pardevice
[ 141.252562] ppdev0: registered pardevice
[ 141.300635] ppdev0: unregistered pardevice
[ 141.400225] ppdev0: registered pardevice
[ 141.440814] ppdev0: unregistered pardevice
[ 922.605610] kjournald starting. Commit interval 5 seconds
[ 922.606666] EXT3 FS on sdb1, internal journal
[ 922.607566] EXT3-fs: mounted filesystem with ordered data mode.
ProblemType: Package
Architecture: i386
DistroRelease: Ubuntu 8.10
ErrorMessage: le sous-processus post-installation script a retourné une erreur de sortie d'état 2
LsUsb:
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 0781:9219 SanDisk Corp. Card Reader
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Package: linux-image-2.6.27-17-generic 2.6.27-17.46
ProcCmdLine: User Name=UUID=6d624b56-74e0-4f60-8f3d-613f5a151772 ro quiet splash
ProcVersionSignature: Ubuntu 2.6.27-17.45-generic
SourcePackage: linux
Title: package linux-image-2.6.27-17-generic 2.6.27-17.46 failed to install/upgrade: le sous-processus post-installation script a retourné une erreur de sortie d'état 2
** Affects: linux (Ubuntu)
Importance: Undecided
Status: New
** Tags: apport-package
--
package linux-image-2.6.27-17-generic 2.6.27-17.46 failed to install/upgrade: le sous-processus post-installation script a retourné une erreur de sortie d'état 2
https://bugs.launchpad.net/bugs/540974
You received this bug notification because you are a member of Kernel
Bugs, which is subscribed to linux in ubuntu.
More information about the kernel-bugs
mailing list