[Bug 644452] Re: Atheros AR928X not connecting on wireless HP G60-468CA

Tue Oct 12 13:31:30 UTC 2010

INF category management usually provides pointers on driver modulation...
was just an idea.

On Tue, Oct 12, 2010 at 8:54 AM, Daniel Cardin
<644452 at bugs.launchpad.net>wrote:

> Why would I do that ? The driver works just fine. I have been using it
> all day with wicd.
>
> It's only the killswitch status that prevents network-manager from doing
> its job. If there were
> an option to diregard the status, it would work :)
>
>
> De: "Cypher2" <nathanel.titane at gmail.com>
> À: "Daniel Cardin" <Daniel.Cardin at gmail.com>
> Envoyé: Mardi 12 Octobre 2010 08:40:06
> Objet: Re: [Bug 644452] Re: Atheros AR928X not connecting on wireless HP
> G60-468CA
>
> Could you verify if ndisgtk/ndiswrapper INF bypass works? Use modprobe to
> list active driver module and blacklist it.
> On 11 Oct 2010 15:06, "Daniel Cardin" <644452 at bugs.launchpad.net> wrote:
> > I have a fresh install of 10.10 and I am experimenting the disabled
> wireless problem as well.
> > But, on my Dell Vostro 1720, I cannot change the state of the rfkill
> using
> unblock all. It remains blocked.
> >
> > On the other hand, the wireless IS working as using wicd works just
> > fine, where NM fails.
> >
> > sudo ifconfig eth1 up does not report any error works
> >
> > daniel at daniel-Vostro-1720:~$ rfkill list
> > 0: hci0: Bluetooth
> > Soft blocked: no
> > Hard blocked: no
> > 1: dell-wifi: Wireless LAN
> > Soft blocked: yes
> > Hard blocked: yes
> > 2: dell-bluetooth: Bluetooth
> > Soft blocked: no
> > Hard blocked: no
> >
> > No change after sudo rfkill unblock all
> >
> > The chip is a broadcom 4322, but this seems unrelated. Looks like an
> > interaction with the BIOS killswitch info. There was a similar bug which
> > affected Dell laptops that was raised against Lucid : bug #430809
> >
> > --
> > Atheros AR928X not connecting on wireless HP G60-468CA
> > https://bugs.launchpad.net/bugs/644452
> > You received this bug notification because you are a direct subscriber
> > of the bug.
> >
> > Status in “linux” package in Ubuntu: New
> >
> > Bug description:
> > Hello,
> >
> > this bug concerns my HP G60-468CA laptop. Since testing maverick amd64,
> the wireless button switch stays orange and refuses to turn blue to
> activate, and the wireless acess is greyed out on both gnome and KDE
> (Ubuntu
> and Kubuntu respectively) running on the latest 2.6.35 kernel. Installing
> the latest mainline kernal hangs on boot for all GRUB options (2.6.36-rc4)
> and renders sytem unusable.
> >
> > All terminal configs failed to make this work (lspci and modprobe say
> that
> ath9k is in use and hardware is running and present...
> >
> > Lucid lynx worked flawlessly.. I even popped the wireless hatch open to
> manually remove the wireless card and verify output again...
> >
> > Please help!
> >
> > (It might be a duplicate since the report failed on timeout on my last
> attempt to submit)
> >
> >
> > Output:
> >
> > nathanel at Solace:~$ lspci -vnvn
> > 00:00.0 RAM memory [0500]: nVidia Corporation MCP78S [GeForce 8200]
> Memory
> Controller [10de:0754] (rev a2)
> > Subsystem: Hewlett-Packard Company Device [103c:360a]
> > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> > Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- >SERR- <PERR- INTx-
> > Latency: 0
> > Capabilities: <access denied>
> >
> > 00:01.0 ISA bridge [0601]: nVidia Corporation Device [10de:075e] (rev a2)
> > Subsystem: Hewlett-Packard Company Device [103c:360a]
> > Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> > Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- >SERR- <PERR- INTx-
> > Latency: 0
> > Region 0: I/O ports at 1a00 [size=256]
> >
> > 00:01.1 SMBus [0c05]: nVidia Corporation MCP78S [GeForce 8200] SMBus
> [10de:0752] (rev a1)
> > Subsystem: Hewlett-Packard Company Device [103c:360a]
> > Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> > Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- >SERR- <PERR- INTx-
> > Interrupt: pin A routed to IRQ 10
> > Region 0: I/O ports at 3080 [size=64]
> > Region 4: I/O ports at 3040 [size=64]
> > Region 5: I/O ports at 3000 [size=64]
> > Capabilities: <access denied>
> > Kernel driver in use: nForce2_smbus
> > Kernel modules: i2c-nforce2
> >
> > 00:01.3 Co-processor [0b40]: nVidia Corporation MCP78S [GeForce 8200]
> Co-Processor [10de:0753] (rev a2)
> > Subsystem: Hewlett-Packard Company Device [103c:360a]
> > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> > Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- >SERR- <PERR- INTx-
> > Latency: 0 (750ns min, 250ns max)
> > Interrupt: pin B routed to IRQ 11
> > Region 0: Memory at c0080000 (32-bit, non-prefetchable) [size=512K]
> >
> > 00:01.4 RAM memory [0500]: nVidia Corporation MCP78S [GeForce 8200]
> Memory
> Controller [10de:0568] (rev a1)
> > Subsystem: Hewlett-Packard Company Device [103c:360a]
> > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx+
> > Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- >SERR- <PERR- INTx-
> >
> > 00:02.0 USB Controller [0c03]: nVidia Corporation MCP78S [GeForce 8200]
> OHCI USB 1.1 Controller [10de:077b] (rev a1) (prog-if 10 [OHCI])
> > Subsystem: Hewlett-Packard Company Device [103c:360a]
> > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> > Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- >SERR- <PERR- INTx-
> > Latency: 0 (750ns min, 250ns max)
> > Interrupt: pin A routed to IRQ 17
> > Region 0: Memory at c0006000 (32-bit, non-prefetchable) [size=4K]
> > Capabilities: <access denied>
> > Kernel driver in use: ohci_hcd
> >
> > 00:02.1 USB Controller [0c03]: nVidia Corporation MCP78S [GeForce 8200]
> EHCI USB 2.0 Controller [10de:077c] (rev a1) (prog-if 20 [EHCI])
> > Subsystem: Hewlett-Packard Company Device [103c:360a]
> > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> > Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- >SERR- <PERR- INTx-
> > Latency: 0 (750ns min, 250ns max)
> > Interrupt: pin B routed to IRQ 17
> > Region 0: Memory at c0007000 (32-bit, non-prefetchable) [size=256]
> > Capabilities: <access denied>
> > Kernel driver in use: ehci_hcd
> >
> > 00:04.0 USB Controller [0c03]: nVidia Corporation MCP78S [GeForce 8200]
> OHCI USB 1.1 Controller [10de:077d] (rev a1) (prog-if 10 [OHCI])
> > Subsystem: Hewlett-Packard Company Device [103c:360a]
> > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> > Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- >SERR- <PERR- INTx-
> > Latency: 0 (750ns min, 250ns max)
> > Interrupt: pin A routed to IRQ 16
> > Region 0: Memory at c0008000 (32-bit, non-prefetchable) [size=4K]
> > Capabilities: <access denied>
> > Kernel driver in use: ohci_hcd
> >
> > 00:04.1 USB Controller [0c03]: nVidia Corporation MCP78S [GeForce 8200]
> EHCI USB 2.0 Controller [10de:077e] (rev a1) (prog-if 20 [EHCI])
> > Subsystem: Hewlett-Packard Company Device [103c:360a]
> > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> > Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- >SERR- <PERR- INTx-
> > Latency: 0 (750ns min, 250ns max)
> > Interrupt: pin B routed to IRQ 16
> > Region 0: Memory at c0007400 (32-bit, non-prefetchable) [size=256]
> > Capabilities: <access denied>
> > Kernel driver in use: ehci_hcd
> >
> > 00:06.0 IDE interface [0101]: nVidia Corporation MCP78S [GeForce 8200]
> IDE
> [10de:0759] (rev a1) (prog-if 8a [Master SecP PriP])
> > Subsystem: Hewlett-Packard Company Device [103c:360a]
> > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> > Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- >SERR- <PERR- INTx+
> > Latency: 0 (750ns min, 250ns max)
> > Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable)
> [size=8]
> > Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable)
> [size=1]
> > Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable)
> [size=8]
> > Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable)
> [size=1]
> > Region 4: I/O ports at 30c0 [size=16]
> > Capabilities: <access denied>
> > Kernel driver in use: pata_amd
> > Kernel modules: pata_amd
> >
> > 00:07.0 Audio device [0403]: nVidia Corporation
> MCP72XE/MCP72P/MCP78U/MCP78S High Definition Audio [10de:0774] (rev a1)
> > Subsystem: Hewlett-Packard Company Device [103c:360a]
> > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> > Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- >SERR- <PERR- INTx-
> > Latency: 0 (500ns min, 1250ns max)
> > Interrupt: pin A routed to IRQ 19
> > Region 0: Memory at c0000000 (32-bit, non-prefetchable) [size=16K]
> > Capabilities: <access denied>
> > Kernel driver in use: HDA Intel
> > Kernel modules: snd-hda-intel
> >
> > 00:08.0 PCI bridge [0604]: nVidia Corporation MCP78S [GeForce 8200] PCI
> Bridge [10de:075a] (rev a1) (prog-if 01 [Subtractive decode])
> > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR+ FastB2B- DisINTx-
> > Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- >SERR- <PERR- INTx-
> > Latency: 0
> > Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
> > Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
> <MAbort+ <SERR- <PERR-
> > BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
> > PriDiscTmr- SecDiscTmr+ DiscTmrStat- DiscTmrSERREn-
> > Capabilities: <access denied>
> >
> > 00:09.0 IDE interface [0101]: nVidia Corporation MCP78S [GeForce 8200]
> SATA Controller (non-AHCI mode) [10de:0ad0] (rev a2) (prog-if 85 [Master
> SecO PriO])
> > Subsystem: Hewlett-Packard Company Device [103c:360a]
> > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR+ FastB2B- DisINTx+
> > Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- >SERR- <PERR- INTx-
> > Latency: 0 (750ns min, 250ns max)
> > Interrupt: pin A routed to IRQ 41
> > Region 0: I/O ports at 30f0 [size=8]
> > Region 1: I/O ports at 30e4 [size=4]
> > Region 2: I/O ports at 30e8 [size=8]
> > Region 3: I/O ports at 30e0 [size=4]
> > Region 4: I/O ports at 30d0 [size=16]
> > Region 5: Memory at c0004000 (32-bit, non-prefetchable) [size=8K]
> > Capabilities: <access denied>
> > Kernel driver in use: ahci
> > Kernel modules: ahci
> >
> > 00:0a.0 Ethernet controller [0200]: nVidia Corporation MCP77 Ethernet
> [10de:0760] (rev a2)
> > Subsystem: Hewlett-Packard Company Device [103c:360a]
> > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx+
> > Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- >SERR- <PERR- INTx-
> > Latency: 0 (250ns min, 5000ns max)
> > Interrupt: pin A routed to IRQ 42
> > Region 0: Memory at c0009000 (32-bit, non-prefetchable) [size=4K]
> > Region 1: I/O ports at 30f8 [size=8]
> > Region 2: Memory at c0007c00 (32-bit, non-prefetchable) [size=256]
> > Region 3: Memory at c0007800 (32-bit, non-prefetchable) [size=16]
> > Capabilities: <access denied>
> > Kernel driver in use: forcedeth
> > Kernel modules: forcedeth
> >
> > 00:0b.0 PCI bridge [0604]: nVidia Corporation MCP78S [GeForce 8200] PCI
> Express Bridge [10de:0569] (rev a1) (prog-if 00 [Normal decode])
> > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR+ FastB2B- DisINTx-
> > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- >SERR- <PERR- INTx-
> > Latency: 0
> > Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
> > I/O behind bridge: 00004000-00004fff
> > Memory behind bridge: c1000000-c1ffffff
> > Prefetchable memory behind bridge: 00000000c4000000-00000000dfffffff
> > Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- <SERR- <PERR-
> > BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
> > PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> > Capabilities: <access denied>
> > Kernel modules: shpchp
> >
> > 00:14.0 PCI bridge [0604]: nVidia Corporation MCP78S [GeForce 8200] PCI
> Bridge [10de:077a] (rev a1) (prog-if 00 [Normal decode])
> > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR+ FastB2B- DisINTx+
> > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- >SERR- <PERR- INTx-
> > Latency: 0
> > Bus: primary=00, secondary=07, subordinate=07, sec-latency=0
> > Memory behind bridge: c2000000-c20fffff
> > Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort+ <SERR- <PERR-
> > BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
> > PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> > Capabilities: <access denied>
> > Kernel driver in use: pcieport
> > Kernel modules: shpchp
> >
> > 00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] Family 11h
> Processor HyperTransport Configuration [1022:1300] (rev 40)
> > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- >SERR- <PERR- INTx-
> > Capabilities: <access denied>
> >
> > 00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] Family 11h
> Processor Address Map [1022:1301]
> > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> > Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- >SERR- <PERR- INTx-
> >
> > 00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] Family 11h
> Processor DRAM Controller [1022:1302]
> > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> > Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- >SERR- <PERR- INTx-
> > Kernel modules: amd64_edac_mod
> >
> > 00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] Family 11h
> Processor Miscellaneous Control [1022:1303]
> > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- >SERR- <PERR- INTx-
> > Capabilities: <access denied>
> > Kernel driver in use: k10temp
> > Kernel modules: k10temp
> >
> > 00:18.4 Host bridge [0600]: Advanced Micro Devices [AMD] Family 11h
> Processor Link Control [1022:1304]
> > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> > Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- >SERR- <PERR- INTx-
> >
> > 02:00.0 VGA compatible controller [0300]: nVidia Corporation C77 [GeForce
> 8200M G] [10de:0845] (rev a2) (prog-if 00 [VGA controller])
> > Subsystem: Hewlett-Packard Company Device [103c:360a]
> > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR+ FastB2B- DisINTx-
> > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- >SERR- <PERR- INTx-
> > Latency: 0
> > Interrupt: pin A routed to IRQ 20
> > Region 0: Memory at c1000000 (32-bit, non-prefetchable) [size=16M]
> > Region 1: Memory at d0000000 (64-bit, prefetchable) [size=256M]
> > Region 3: Memory at c4000000 (64-bit, prefetchable) [size=32M]
> > Region 5: I/O ports at 4000 [size=128]
> > [virtual] Expansion ROM at c6000000 [disabled] [size=128K]
> > Capabilities: <access denied>
> > Kernel driver in use: nouveau
> > Kernel modules: nouveau, nvidiafb
> >
> > 07:00.0 Network controller [0280]: Atheros Communications Inc. AR928X
> Wireless Network Adapter (PCI-Express) [168c:002a] (rev 01)
> > Subsystem: Hewlett-Packard Company Device [103c:1381]
> > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR+ FastB2B- DisINTx-
> > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- >SERR- <PERR- INTx-
> > Latency: 0, Cache Line Size: 64 bytes
> > Interrupt: pin A routed to IRQ 23
> > Region 0: Memory at c2000000 (64-bit, non-prefetchable) [size=64K]
> > Capabilities: <access denied>
> > Kernel driver in use: ath9k
> > Kernel modules: ath9k
> >
> > ProblemType: Bug
> > DistroRelease: Ubuntu 10.10
> > Package: linux-image-2.6.35-22-generic 2.6.35-22.33
> > Regression: Yes
> > Reproducible: No
> > ProcVersionSignature: Ubuntu 2.6.35-22.33-generic 2.6.35.4
> > Uname: Linux 2.6.35-22-generic x86_64
> > AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.23.
> > Architecture: amd64
> > ArecordDevices:
> > **** List of CAPTURE Hardware Devices ****
> > card 0: NVidia [HDA NVidia], device 0: CONEXANT Analog [CONEXANT Analog]
> > Subdevices: 1/1
> > Subdevice #0: subdevice #0
> > AudioDevicesInUse:
> > USER PID ACCESS COMMAND
> > /dev/snd/controlC0: ubuntu 4436 F.... pulseaudio
> > CRDA: Error: [Errno 2] No such file or directory
> > Card0.Amixer.info:
> > Card hw:0 'NVidia'/'HDA NVidia at 0xc0000000 irq 19'
> > Mixer name : 'Nvidia MCP77/78 HDMI'
> > Components : 'HDA:14f15051,103c360a,00100000
> HDA:10de0002,10de0101,00100000'
> > Controls : 18
> > Simple ctrls : 8
> > Date: Tue Sep 21 15:08:44 2010
> > Frequency: Once a day.
> > LiveMediaBuild: Kubuntu 10.10 "Maverick Meerkat" - Alpha amd64 (20100920)
> > MachineType: Hewlett-Packard HP G60 Notebook PC
> > ProcCmdLine: noprompt cdrom-detect/try-usb=true
> file=/cdrom/preseed/khostname.seed boot=casper maybe-ubiquity
> initrd=/casper/initrd.lz quiet splash -- BOOT_IMAGE=/casper/vmlinuz
> > ProcEnviron:
> > LANGUAGE=
> > LANG=en_US.UTF-8
> > SHELL=/bin/bash
> > RelatedPackageVersions: linux-firmware 1.38
> > SourcePackage: linux
> > dmi.bios.date: 08/18/2009
> > dmi.bios.vendor: Hewlett-Packard
> > dmi.bios.version: F.54
> > dmi.board.name: 303C
> > dmi.board.vendor: Wistron
> > dmi.board.version: 08.60
> > dmi.chassis.type: 10
> > dmi.chassis.vendor: Wistron
> > dmi.chassis.version: N/A
> > dmi.modalias:
>
> dmi:bvnHewlett-Packard:bvrF.54:bd08/18/2009:svnHewlett-Packard:pnHPG60NotebookPC:pvrF.54:rvnWistron:rn303C:rvr08.60:cvnWistron:ct10:cvrN/A:
> > dmi.product.name: HP G60 Notebook PC
> > dmi.product.version: F.54
> > dmi.sys.vendor: Hewlett-Packard
> >
> > To unsubscribe from this bug, go to:
> > https://bugs.launchpad.net/ubuntu/+source/linux/+bug/644452/+subscribe
>
> --
> Atheros AR928X not connecting on wireless HP G60-468CA
> https://bugs.launchpad.net/bugs/644452
> You received this bug notification because you are a direct subscriber
> of the bug.
>
> --
> Atheros AR928X not connecting on wireless HP G60-468CA
> https://bugs.launchpad.net/bugs/644452
> You received this bug notification because you are a direct subscriber
> of the bug.
>
> Status in “linux” package in Ubuntu: New
>
> Bug description:
> Hello,
>
> this bug concerns my HP G60-468CA laptop. Since testing maverick amd64, the
> wireless button switch stays orange and refuses to turn blue to activate,
> and the wireless acess is greyed out on both gnome and KDE (Ubuntu and
> Kubuntu respectively) running on the latest 2.6.35 kernel. Installing the
> latest mainline kernal hangs on boot for all GRUB options (2.6.36-rc4) and
> renders sytem unusable.
>
> All terminal configs failed to make this work (lspci and modprobe say that
> ath9k is in use and hardware is running and present...
>
> Lucid lynx worked flawlessly..  I even popped the wireless hatch open to
> manually remove the wireless card and verify output again...
>
> Please help!
>
> (It might be a duplicate since the report failed on timeout on my last
> attempt to submit)
>
>
> Output:
>
> nathanel at Solace:~$ lspci -vnvn
> 00:00.0 RAM memory [0500]: nVidia Corporation MCP78S [GeForce 8200] Memory
> Controller [10de:0754] (rev a2)
>        Subsystem: Hewlett-Packard Company Device [103c:360a]
>        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
>        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
>        Latency: 0
>        Capabilities: <access denied>
>
> 00:01.0 ISA bridge [0601]: nVidia Corporation Device [10de:075e] (rev a2)
>        Subsystem: Hewlett-Packard Company Device [103c:360a]
>        Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
>        Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
>        Latency: 0
>        Region 0: I/O ports at 1a00 [size=256]
>
> 00:01.1 SMBus [0c05]: nVidia Corporation MCP78S [GeForce 8200] SMBus
> [10de:0752] (rev a1)
>        Subsystem: Hewlett-Packard Company Device [103c:360a]
>        Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
>        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
>        Interrupt: pin A routed to IRQ 10
>        Region 0: I/O ports at 3080 [size=64]
>        Region 4: I/O ports at 3040 [size=64]
>        Region 5: I/O ports at 3000 [size=64]
>        Capabilities: <access denied>
>        Kernel driver in use: nForce2_smbus
>        Kernel modules: i2c-nforce2
>
> 00:01.3 Co-processor [0b40]: nVidia Corporation MCP78S [GeForce 8200]
> Co-Processor [10de:0753] (rev a2)
>        Subsystem: Hewlett-Packard Company Device [103c:360a]
>        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
>        Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
>        Latency: 0 (750ns min, 250ns max)
>        Interrupt: pin B routed to IRQ 11
>        Region 0: Memory at c0080000 (32-bit, non-prefetchable) [size=512K]
>
> 00:01.4 RAM memory [0500]: nVidia Corporation MCP78S [GeForce 8200] Memory
> Controller [10de:0568] (rev a1)
>        Subsystem: Hewlett-Packard Company Device [103c:360a]
>        Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx+
>        Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
>
> 00:02.0 USB Controller [0c03]: nVidia Corporation MCP78S [GeForce 8200]
> OHCI USB 1.1 Controller [10de:077b] (rev a1) (prog-if 10 [OHCI])
>        Subsystem: Hewlett-Packard Company Device [103c:360a]
>        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
>        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
>        Latency: 0 (750ns min, 250ns max)
>        Interrupt: pin A routed to IRQ 17
>        Region 0: Memory at c0006000 (32-bit, non-prefetchable) [size=4K]
>        Capabilities: <access denied>
>        Kernel driver in use: ohci_hcd
>
> 00:02.1 USB Controller [0c03]: nVidia Corporation MCP78S [GeForce 8200]
> EHCI USB 2.0 Controller [10de:077c] (rev a1) (prog-if 20 [EHCI])
>        Subsystem: Hewlett-Packard Company Device [103c:360a]
>        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
>        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
>        Latency: 0 (750ns min, 250ns max)
>        Interrupt: pin B routed to IRQ 17
>        Region 0: Memory at c0007000 (32-bit, non-prefetchable) [size=256]
>        Capabilities: <access denied>
>        Kernel driver in use: ehci_hcd
>
> 00:04.0 USB Controller [0c03]: nVidia Corporation MCP78S [GeForce 8200]
> OHCI USB 1.1 Controller [10de:077d] (rev a1) (prog-if 10 [OHCI])
>        Subsystem: Hewlett-Packard Company Device [103c:360a]
>        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
>        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
>        Latency: 0 (750ns min, 250ns max)
>        Interrupt: pin A routed to IRQ 16
>        Region 0: Memory at c0008000 (32-bit, non-prefetchable) [size=4K]
>        Capabilities: <access denied>
>        Kernel driver in use: ohci_hcd
>
> 00:04.1 USB Controller [0c03]: nVidia Corporation MCP78S [GeForce 8200]
> EHCI USB 2.0 Controller [10de:077e] (rev a1) (prog-if 20 [EHCI])
>        Subsystem: Hewlett-Packard Company Device [103c:360a]
>        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
>        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
>        Latency: 0 (750ns min, 250ns max)
>        Interrupt: pin B routed to IRQ 16
>        Region 0: Memory at c0007400 (32-bit, non-prefetchable) [size=256]
>        Capabilities: <access denied>
>        Kernel driver in use: ehci_hcd
>
> 00:06.0 IDE interface [0101]: nVidia Corporation MCP78S [GeForce 8200] IDE
> [10de:0759] (rev a1) (prog-if 8a [Master SecP PriP])
>        Subsystem: Hewlett-Packard Company Device [103c:360a]
>        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
>        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx+
>        Latency: 0 (750ns min, 250ns max)
>        Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable)
> [size=8]
>        Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable)
> [size=1]
>        Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable)
> [size=8]
>        Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable)
> [size=1]
>        Region 4: I/O ports at 30c0 [size=16]
>        Capabilities: <access denied>
>        Kernel driver in use: pata_amd
>        Kernel modules: pata_amd
>
> 00:07.0 Audio device [0403]: nVidia Corporation
> MCP72XE/MCP72P/MCP78U/MCP78S High Definition Audio [10de:0774] (rev a1)
>        Subsystem: Hewlett-Packard Company Device [103c:360a]
>        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
>        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
>        Latency: 0 (500ns min, 1250ns max)
>        Interrupt: pin A routed to IRQ 19
>        Region 0: Memory at c0000000 (32-bit, non-prefetchable) [size=16K]
>        Capabilities: <access denied>
>        Kernel driver in use: HDA Intel
>        Kernel modules: snd-hda-intel
>
> 00:08.0 PCI bridge [0604]: nVidia Corporation MCP78S [GeForce 8200] PCI
> Bridge [10de:075a] (rev a1) (prog-if 01 [Subtractive decode])
>        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR+ FastB2B- DisINTx-
>        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
>        Latency: 0
>        Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
>        Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort+ <SERR- <PERR-
>        BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
>                PriDiscTmr- SecDiscTmr+ DiscTmrStat- DiscTmrSERREn-
>        Capabilities: <access denied>
>
> 00:09.0 IDE interface [0101]: nVidia Corporation MCP78S [GeForce 8200] SATA
> Controller (non-AHCI mode) [10de:0ad0] (rev a2) (prog-if 85 [Master SecO
> PriO])
>        Subsystem: Hewlett-Packard Company Device [103c:360a]
>        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR+ FastB2B- DisINTx+
>        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
>        Latency: 0 (750ns min, 250ns max)
>        Interrupt: pin A routed to IRQ 41
>        Region 0: I/O ports at 30f0 [size=8]
>        Region 1: I/O ports at 30e4 [size=4]
>        Region 2: I/O ports at 30e8 [size=8]
>        Region 3: I/O ports at 30e0 [size=4]
>        Region 4: I/O ports at 30d0 [size=16]
>        Region 5: Memory at c0004000 (32-bit, non-prefetchable) [size=8K]
>        Capabilities: <access denied>
>        Kernel driver in use: ahci
>        Kernel modules: ahci
>
> 00:0a.0 Ethernet controller [0200]: nVidia Corporation MCP77 Ethernet
> [10de:0760] (rev a2)
>        Subsystem: Hewlett-Packard Company Device [103c:360a]
>        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx+
>        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
>        Latency: 0 (250ns min, 5000ns max)
>        Interrupt: pin A routed to IRQ 42
>        Region 0: Memory at c0009000 (32-bit, non-prefetchable) [size=4K]
>        Region 1: I/O ports at 30f8 [size=8]
>        Region 2: Memory at c0007c00 (32-bit, non-prefetchable) [size=256]
>        Region 3: Memory at c0007800 (32-bit, non-prefetchable) [size=16]
>        Capabilities: <access denied>
>        Kernel driver in use: forcedeth
>        Kernel modules: forcedeth
>
> 00:0b.0 PCI bridge [0604]: nVidia Corporation MCP78S [GeForce 8200] PCI
> Express Bridge [10de:0569] (rev a1) (prog-if 00 [Normal decode])
>        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR+ FastB2B- DisINTx-
>        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
>        Latency: 0
>        Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
>        I/O behind bridge: 00004000-00004fff
>        Memory behind bridge: c1000000-c1ffffff
>        Prefetchable memory behind bridge: 00000000c4000000-00000000dfffffff
>        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- <SERR- <PERR-
>        BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
>                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>        Capabilities: <access denied>
>        Kernel modules: shpchp
>
> 00:14.0 PCI bridge [0604]: nVidia Corporation MCP78S [GeForce 8200] PCI
> Bridge [10de:077a] (rev a1) (prog-if 00 [Normal decode])
>        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR+ FastB2B- DisINTx+
>        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
>        Latency: 0
>        Bus: primary=00, secondary=07, subordinate=07, sec-latency=0
>        Memory behind bridge: c2000000-c20fffff
>        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort+ <SERR- <PERR-
>        BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
>                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>        Capabilities: <access denied>
>        Kernel driver in use: pcieport
>        Kernel modules: shpchp
>
> 00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] Family 11h
> Processor HyperTransport Configuration [1022:1300] (rev 40)
>        Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
>        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
>        Capabilities: <access denied>
>
> 00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] Family 11h
> Processor Address Map [1022:1301]
>        Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
>        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
>
> 00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] Family 11h
> Processor DRAM Controller [1022:1302]
>        Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
>        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
>        Kernel modules: amd64_edac_mod
>
> 00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] Family 11h
> Processor Miscellaneous Control [1022:1303]
>        Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
>        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
>        Capabilities: <access denied>
>        Kernel driver in use: k10temp
>        Kernel modules: k10temp
>
> 00:18.4 Host bridge [0600]: Advanced Micro Devices [AMD] Family 11h
> Processor Link Control [1022:1304]
>        Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
>        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
>
> 02:00.0 VGA compatible controller [0300]: nVidia Corporation C77 [GeForce
> 8200M G] [10de:0845] (rev a2) (prog-if 00 [VGA controller])
>        Subsystem: Hewlett-Packard Company Device [103c:360a]
>        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR+ FastB2B- DisINTx-
>        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
>        Latency: 0
>        Interrupt: pin A routed to IRQ 20
>        Region 0: Memory at c1000000 (32-bit, non-prefetchable) [size=16M]
>        Region 1: Memory at d0000000 (64-bit, prefetchable) [size=256M]
>        Region 3: Memory at c4000000 (64-bit, prefetchable) [size=32M]
>        Region 5: I/O ports at 4000 [size=128]
>        [virtual] Expansion ROM at c6000000 [disabled] [size=128K]
>        Capabilities: <access denied>
>        Kernel driver in use: nouveau
>        Kernel modules: nouveau, nvidiafb
>
> 07:00.0 Network controller [0280]: Atheros Communications Inc. AR928X
> Wireless Network Adapter (PCI-Express) [168c:002a] (rev 01)
>        Subsystem: Hewlett-Packard Company Device [103c:1381]
>        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR+ FastB2B- DisINTx-
>        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
>        Latency: 0, Cache Line Size: 64 bytes
>        Interrupt: pin A routed to IRQ 23
>        Region 0: Memory at c2000000 (64-bit, non-prefetchable) [size=64K]
>        Capabilities: <access denied>
>        Kernel driver in use: ath9k
>        Kernel modules: ath9k
>
> ProblemType: Bug
> DistroRelease: Ubuntu 10.10
> Package: linux-image-2.6.35-22-generic 2.6.35-22.33
> Regression: Yes
> Reproducible: No
> ProcVersionSignature: Ubuntu 2.6.35-22.33-generic 2.6.35.4
> Uname: Linux 2.6.35-22-generic x86_64
> AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.23.
> Architecture: amd64
> ArecordDevices:
>  **** List of CAPTURE Hardware Devices ****
>  card 0: NVidia [HDA NVidia], device 0: CONEXANT Analog [CONEXANT Analog]
>   Subdevices: 1/1
>   Subdevice #0: subdevice #0
> AudioDevicesInUse:
>  USER        PID ACCESS COMMAND
>  /dev/snd/controlC0:  ubuntu     4436 F.... pulseaudio
> CRDA: Error: [Errno 2] No such file or directory
> Card0.Amixer.info:
>  Card hw:0 'NVidia'/'HDA NVidia at 0xc0000000 irq 19'
>   Mixer name   : 'Nvidia MCP77/78 HDMI'
>   Components   : 'HDA:14f15051,103c360a,00100000
> HDA:10de0002,10de0101,00100000'
>   Controls      : 18
>   Simple ctrls  : 8
> Date: Tue Sep 21 15:08:44 2010
> Frequency: Once a day.
> LiveMediaBuild: Kubuntu 10.10 "Maverick Meerkat" - Alpha amd64 (20100920)
> MachineType: Hewlett-Packard HP G60 Notebook PC
> ProcCmdLine: noprompt cdrom-detect/try-usb=true
> file=/cdrom/preseed/khostname.seed boot=casper maybe-ubiquity
> initrd=/casper/initrd.lz quiet splash -- BOOT_IMAGE=/casper/vmlinuz
> ProcEnviron:
>  LANGUAGE=
>  LANG=en_US.UTF-8
>  SHELL=/bin/bash
> RelatedPackageVersions: linux-firmware 1.38
> SourcePackage: linux
> dmi.bios.date: 08/18/2009
> dmi.bios.vendor: Hewlett-Packard
> dmi.bios.version: F.54
> dmi.board.name: 303C
> dmi.board.vendor: Wistron
> dmi.board.version: 08.60
> dmi.chassis.type: 10
> dmi.chassis.vendor: Wistron
> dmi.chassis.version: N/A
> dmi.modalias:
> dmi:bvnHewlett-Packard:bvrF.54:bd08/18/2009:svnHewlett-Packard:pnHPG60NotebookPC:pvrF.54:rvnWistron:rn303C:rvr08.60:cvnWistron:ct10:cvrN/A:
> dmi.product.name: HP G60 Notebook PC
> dmi.product.version: F.54
> dmi.sys.vendor: Hewlett-Packard
>
> To unsubscribe from this bug, go to:
> https://bugs.launchpad.net/ubuntu/+source/linux/+bug/644452/+subscribe
>

-- 
Atheros AR928X not connecting on wireless HP G60-468CA
https://bugs.launchpad.net/bugs/644452
You received this bug notification because you are a member of Kernel
Bugs, which is subscribed to linux in ubuntu.