[Bug 336837] Re: USB-Hub from the LG L246WH monitor doesn't work

[Bernd Schlapsi]

I don't really know why you mark this bug as incomplete? I provided all
requested information. I would provide more information if someone ask
for it.

I tested the latest Ubuntu 10.10 on my test notebook and the problem
still exists.

After I connected the usb cable with my notebook I get the following messages in /var/log/messages:
Sep 23 20:56:39 meerkat kernel: [  543.484197] usb 2-1: new high speed USB device using ehci_hcd and address 9
Sep 23 20:56:39 meerkat kernel: [  544.052231] usb 2-1: new high speed USB device using ehci_hcd and address 10
Sep 23 20:56:40 meerkat kernel: [  544.556196] usb 2-1: new high speed USB device using ehci_hcd and address 11
Sep 23 20:56:40 meerkat kernel: [  545.084094] usb 2-1: new high speed USB device using ehci_hcd and address 12
Sep 23 20:56:41 meerkat kernel: [  545.832175] usb 5-1: new full speed USB device using uhci_hcd and address 43
Sep 23 20:56:41 meerkat kernel: [  545.972341] usb 5-1: not running at top speed; connect to a high speed hub
Sep 23 20:56:41 meerkat kernel: [  545.982357] hub 5-1:1.0: USB hub found
Sep 23 20:56:41 meerkat kernel: [  545.984368] hub 5-1:1.0: 2 ports detected

If I connect a wlan stick to the usb port on the monitor I get the following output:
Sep 23 20:57:55 meerkat kernel: [  619.602350] usb 5-1.2: new full speed USB device using uhci_hcd and address 44
Sep 23 20:57:55 meerkat kernel: [  620.082351] usb 5-1.2: new full speed USB device using uhci_hcd and address 45
Sep 23 20:57:56 meerkat kernel: [  620.566352] usb 5-1.2: new full speed USB device using uhci_hcd and address 46
Sep 23 20:57:56 meerkat kernel: [  621.066350] usb 5-1.2: new full speed USB device using uhci_hcd and address 47

but the device isn't working. If I connect the wlan stick directly to my computer there is the following output:
Sep 23 20:59:02 meerkat kernel: [  686.940186] usb 2-2: new high speed USB device using ehci_hcd and address 13
Sep 23 20:59:03 meerkat kernel: [  687.188208] usb 2-2: reset high speed USB device using ehci_hcd and address 13
Sep 23 20:59:03 meerkat kernel: [  687.323647] zd1211rw 2-2:1.0: phy2
Sep 23 20:59:03 meerkat kernel: [  687.396228] zd1211rw 2-2:1.0: firmware version 4725
Sep 23 20:59:03 meerkat kernel: [  687.436244] zd1211rw 2-2:1.0: zd1211b chip 0ace:1215 v4810 high 00-02-72 AL2230_RF pa0 g--NS
Sep 23 20:59:03 meerkat kernel: [  687.465950] ADDRCONF(NETDEV_UP): wlan1: link is not ready
Sep 23 20:59:05 meerkat kernel: [  689.732927] ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready



** Attachment added: "again the output from "sudo lsusb -v > usb.txt""
   https://bugs.edge.launchpad.net/ubuntu/+source/linux/+bug/336837/+attachment/1628108/+files/usb.txt

** Changed in: linux (Ubuntu)
       Status: Expired => New

-- 
USB-Hub from the LG L246WH monitor doesn't work
https://bugs.launchpad.net/bugs/336837
You received this bug notification because you are a member of Kernel
Bugs, which is subscribed to linux in ubuntu.