[Bug 7577] New: 8139too doesn't resume properly

[bugzilla-daemon at bugzilla.ubuntu.com]

Please do not reply to this email.  You can add comments at
http://bugzilla.ubuntu.com/show_bug.cgi?id=7577
Ubuntu | linux

           Summary: 8139too doesn't resume properly
           Product: Ubuntu
           Version: unspecified
          Platform: Other
        OS/Version: other
            Status: NEW
          Severity: normal
          Priority: P2
         Component: linux
        AssignedTo: fabbione at ubuntu.com
        ReportedBy: iamniran at gmail.com
         QAContact: kernel-team at lists.ubuntu.com
                CC: mjg59 at codon.org.uk


With the stock /etc/acpi/prepare.sh script, the driver doesn't come back up at
all, and produces this in dmesg:

8139too Fast Ethernet driver 0.9.27
8139too: 0000:00:07.0: Chip not responding, ignoring board
8139too: probe of 0000:00:07.0 failed with error -5

After appending "modprobe 8139too" to the end of the script to keep the module
inserted during suspend, the driver comes back up and its eth0 interface is
present. However, the interface cannot get an IP address and produces no visible
activity in the system monitor Gnome applet. This is repeated several times in
the dmesg output:

NETDEV WATCHDOG: eth0: transmit timed out
eth0: Transmit timeout, status ff ffff ffff media ff.
eth0: Tx queue start entry 4  dirty entry 0.
eth0:  Tx descriptor 0 is ffffffff. (queue head)
eth0:  Tx descriptor 1 is ffffffff.
eth0:  Tx descriptor 2 is ffffffff.
eth0:  Tx descriptor 3 is ffffffff.
eth0: link up, 100Mbps, full-duplex, lpa 0xFFFF

-- 
Configure bugmail: http://bugzilla.ubuntu.com/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the QA contact for the bug, or are watching the QA contact.