[GIT PULL] mvl-dove branch sync'ed to Marvell Dove LSP 5.3.3 - Lucid

[Tim Gardner]

On 09/07/2010 09:41 AM, Brad Figg wrote:
> On 08/31/2010 06:57 AM, Eric Miao wrote:
>> Only those fixing patches are cherry-picked. See
>>
>> https://bugs.launchpad.net/ubuntu/+source/linux-mvl-dove/+bug/625132
>>
>> Together with my two patches to make galcore.ko and bmm_drv.ko built-in
>> instead of being module. Reason justified at
>>
>> http://bugs.launchpad.net/bugs/625090
>>
>> Please review and pull. There is also a identical pull request for maverick
>> following this.
>>
>> The following changes since commit 2de7a162a887959f2538a0405e011b58168987d9:
>>     Stefan Bader (1):
>>           UBUNTU: Ubuntu-2.6.32-209.25
>>
>> are available in the git repository at:
>>
>>     git://kernel.ubuntu.com/ycmiao/ubuntu-lucid.git mvl-dove
>>
>> Eric Miao (3):
>>         dove: make galcore built-in
>>         dove: make BMM driver built-in
>>         dove: fix incorrect bus base of macro __io()
>>
>> Green Wan (1):
>>         fix VGA calibration initial value.
>>
>> Marcel Chang (2):
>>         fix jiggling issue for high resolution in dual display.
>>         fix HWC32 enable make system hang while use LCD external clock.
>>
>> Peter Liao (3):
>>         Enable L2WA only and remove L1WA
>>         Enable L2C way 4-7
>>         Disable Dual issue of VFP WMMX for stability
>>
>> Saeed Bishara (7):
>>         dove: use LCD external clock for videoplug board
>>         dove: fix crash issue when lcd1 enabled and the board setup
>> doesn't provide mach board info
>>         dove: fix bug when clearing the needed bit when handling PMU interrupt
>>         dove: fix bug when setting the pcie port control register
>>         orion eth: always call the phy_scan from the resume function
>>         dove: set the giga phy address for dove db board
>>         dove: use AC97 RT655 codec instead of ASoC version
>>
>>    arch/arm/mach-dove/Kconfig                         |    6 ++++
>>    arch/arm/mach-dove/Makefile                        |    2 +-
>>    arch/arm/mach-dove/clcd.c                          |    2 +-
>>    arch/arm/mach-dove/dove-db-setup.c                 |    5 +---
>>    arch/arm/mach-dove/dove-videoplug-setup.c          |   22 ++++++++++++++-
>>    arch/arm/mach-dove/dump_cp15_regs.c                |    2 +-
>>    arch/arm/mach-dove/gc600_driver_dove/Makefile      |    3 +-
>>    .../gc600_driver_dove/galcore_ko_src/Makefile      |    5 ++-
>>    .../galcore_ko_src/hal/os/linux/kernel/Driver.c    |    6 ++--
>>    arch/arm/mach-dove/include/mach/io.h               |    5 ++-
>>    arch/arm/mach-dove/irq.c                           |    2 +-
>>    arch/arm/mach-dove/pcie.c                          |    2 +-
>>    arch/arm/mm/Kconfig                                |   27 +++++++-----------
>>    arch/arm/mm/proc-macros.S                          |    6 +---
>>    arch/arm/mm/proc-v7.S                              |   10 +++----
>>    debian.mvl-dove/config/config.common.ubuntu        |    3 +-
>>    drivers/net/mv643xx_eth.c                          |   11 +++----
>>    drivers/video/marvell/dovefb_base.c                |    2 +-
>>    drivers/video/marvell/dovefb_gfx.c                 |   19 +++++++++++++
>>    include/video/dovefbreg.h                          |    3 ++
>>    sound/soc/orion/Kconfig                            |    1 +
>>    sound/soc/orion/dove_db_b.c                        |   29 +++++++++----------
>>    22 files changed, 104 insertions(+), 69 deletions(-)
>
> Eric,
>
> In the future, if you could make your subject line look like:
>
> [Lucid][Pull request] mvl-dove branch sync'ed to Marvell Dove LSP 5.3.3
>
> It makes it easier to identify which release you are targeting. I know
> this probably needs to go to both Lucid as well as Maverick.
>
> Brad

Brad - the Maverick branch is pulled directly from Lucid using 
debian.lucid-mvl-dove/etc/update-from-lucid-mvl-dove

-- 
Tim Gardner tim.gardner at canonical.com