[3.11.y.z extended stable] Patch "ARM: mvebu: second PCIe unit of Armada XP mv78230 is only x1 capable" has been added to staging queue

[Luis Henriques]

This is a note to let you know that I have just added a patch titled

    ARM: mvebu: second PCIe unit of Armada XP mv78230 is only x1 capable

to the linux-3.11.y-queue branch of the 3.11.y.z extended stable tree 
which can be found at:

 http://kernel.ubuntu.com/git?p=ubuntu/linux.git;a=shortlog;h=refs/heads/linux-3.11.y-queue

If you, or anyone else, feels it should not be added to this tree, please 
reply to this email.

For more information about the 3.11.y.z tree, see
https://wiki.ubuntu.com/Kernel/Dev/ExtendedStable

Thanks.
-Luis

------

>From b0291258d7330eec2ed81e3342e57edc15f5898f Mon Sep 17 00:00:00 2001
From: Arnaud Ebalard <arno at natisbad.org>
Date: Tue, 5 Nov 2013 21:45:48 +0100
Subject: ARM: mvebu: second PCIe unit of Armada XP mv78230 is only x1 capable

commit 12b69a599745fc9e203f61fbb7160b2cc5f479dd upstream.

Various Marvell datasheets advertise second PCIe unit of mv78230
flavour of Armada XP as x4/quad x1 capable. This second unit is in
fact only x1 capable. This patch fixes current mv78230 .dtsi to
reflect that, i.e. makes 1.0 the second interface (instead of 2.0
at the moment). This was successfully tested on a mv78230-based
ReadyNAS 2120 platform with a x1 device (FL1009 XHCI controller)
connected to this second interface.

Signed-off-by: Arnaud Ebalard <arno at natisbad.org>
Acked-by: Thomas Petazzoni <thomas.petazzoni at free-electrons.com>
Signed-off-by: Jason Cooper <jason at lakedaemon.net>
Signed-off-by: Luis Henriques <luis.henriques at canonical.com>
---
 arch/arm/boot/dts/armada-xp-mv78230.dtsi | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/arch/arm/boot/dts/armada-xp-mv78230.dtsi b/arch/arm/boot/dts/armada-xp-mv78230.dtsi
index f8eaa38..f94cdbc 100644
--- a/arch/arm/boot/dts/armada-xp-mv78230.dtsi
+++ b/arch/arm/boot/dts/armada-xp-mv78230.dtsi
@@ -81,7 +81,7 @@
 			/*
 			 * MV78230 has 2 PCIe units Gen2.0: One unit can be
 			 * configured as x4 or quad x1 lanes. One unit is
-			 * x4/x1.
+			 * x1 only.
 			 */
 			pcie-controller {
 				compatible = "marvell,armada-xp-pcie";
@@ -94,10 +94,10 @@
 				bus-range = <0x00 0xff>;

 				ranges = <0x82000000 0 0x40000 0x40000 0 0x00002000   /* Port 0.0 registers */
-					0x82000000 0 0x42000 0x42000 0 0x00002000   /* Port 2.0 registers */
 					0x82000000 0 0x44000 0x44000 0 0x00002000   /* Port 0.1 registers */
 					0x82000000 0 0x48000 0x48000 0 0x00002000   /* Port 0.2 registers */
 					0x82000000 0 0x4c000 0x4c000 0 0x00002000   /* Port 0.3 registers */
+					0x82000000 0 0x80000 0x80000 0 0x00002000   /* Port 1.0 registers */
 					0x82000000 0 0xe0000000 0xe0000000 0 0x08000000   /* non-prefetchable memory */
 					0x81000000 0 0	  0xe8000000 0 0x00100000>; /* downstream I/O */

@@ -165,19 +165,19 @@
 					status = "disabled";
 				};

-				pcie at 9,0 {
+				pcie at 5,0 {
 					device_type = "pci";
-					assigned-addresses = <0x82000800 0 0x42000 0 0x2000>;
-					reg = <0x4800 0 0 0 0>;
+					assigned-addresses = <0x82000800 0 0x80000 0 0x2000>;
+					reg = <0x2800 0 0 0 0>;
 					#address-cells = <3>;
 					#size-cells = <2>;
 					#interrupt-cells = <1>;
 					ranges;
 					interrupt-map-mask = <0 0 0 0>;
-					interrupt-map = <0 0 0 0 &mpic 99>;
-					marvell,pcie-port = <2>;
+					interrupt-map = <0 0 0 0 &mpic 62>;
+					marvell,pcie-port = <1>;
 					marvell,pcie-lane = <0>;
-					clocks = <&gateclk 26>;
+					clocks = <&gateclk 9>;
 					status = "disabled";
 				};
 			};
--
1.8.3.2