[3.11.y.z extended stable] Patch "staging: comedi: 8255_pci: initialize MITE data window" has been added to staging queue

[Luis Henriques]

This is a note to let you know that I have just added a patch titled

    staging: comedi: 8255_pci: initialize MITE data window

to the linux-3.11.y-queue branch of the 3.11.y.z extended stable tree 
which can be found at:

 http://kernel.ubuntu.com/git?p=ubuntu/linux.git;a=shortlog;h=refs/heads/linux-3.11.y-queue

If you, or anyone else, feels it should not be added to this tree, please 
reply to this email.

For more information about the 3.11.y.z tree, see
https://wiki.ubuntu.com/Kernel/Dev/ExtendedStable

Thanks.
-Luis

------

>From d504dbe27f9f7b6d0fc78f29a0f9dba510362c11 Mon Sep 17 00:00:00 2001
From: Ian Abbott <abbotti at mev.co.uk>
Date: Thu, 13 Mar 2014 15:30:39 +0000
Subject: staging: comedi: 8255_pci: initialize MITE data window

commit 268d1e799663b795cba15c64f5d29407786a9dd4 upstream.

According to National Instruments' PCI-DIO-96/PXI-6508/PCI-6503 User
Manual, the physical address in PCI BAR1 needs to be OR'ed with 0x80 and
written to register offset 0xC0 in the "MITE" registers (BAR0).  Do so
during initialization of the National Instruments boards handled by the
"8255_pci" driver.  The boards were previously handled by the
"ni_pcidio" driver, where the initialization was done by `mite_setup()`
in the "mite" module.  The "mite" module comes with too much extra
baggage for the "8255_pci" driver to deal with so use a local, simpler
initialization function.

Signed-off-by: Ian Abbott <abbotti at mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh at linuxfoundation.org>
Signed-off-by: Luis Henriques <luis.henriques at canonical.com>
---
 drivers/staging/comedi/drivers/8255_pci.c | 34 +++++++++++++++++++++++++++++++
 1 file changed, 34 insertions(+)

diff --git a/drivers/staging/comedi/drivers/8255_pci.c b/drivers/staging/comedi/drivers/8255_pci.c
index 3d40a26..2c0e3c4 100644
--- a/drivers/staging/comedi/drivers/8255_pci.c
+++ b/drivers/staging/comedi/drivers/8255_pci.c
@@ -55,6 +55,7 @@ Configuration Options: not applicable, uses PCI auto config
 #include "../comedidev.h"

 #include "8255.h"
+#include "mite.h"

 enum pci_8255_boardid {
 	BOARD_ADLINK_PCI7224,
@@ -78,6 +79,7 @@ struct pci_8255_boardinfo {
 	const char *name;
 	int dio_badr;
 	int n_8255;
+	unsigned int has_mite:1;
 };

 static const struct pci_8255_boardinfo pci_8255_boards[] = {
@@ -125,36 +127,43 @@ static const struct pci_8255_boardinfo pci_8255_boards[] = {
 		.name		= "ni_pci-dio-96",
 		.dio_badr	= 1,
 		.n_8255		= 4,
+		.has_mite	= 1,
 	},
 	[BOARD_NI_PCIDIO96B] = {
 		.name		= "ni_pci-dio-96b",
 		.dio_badr	= 1,
 		.n_8255		= 4,
+		.has_mite	= 1,
 	},
 	[BOARD_NI_PXI6508] = {
 		.name		= "ni_pxi-6508",
 		.dio_badr	= 1,
 		.n_8255		= 4,
+		.has_mite	= 1,
 	},
 	[BOARD_NI_PCI6503] = {
 		.name		= "ni_pci-6503",
 		.dio_badr	= 1,
 		.n_8255		= 1,
+		.has_mite	= 1,
 	},
 	[BOARD_NI_PCI6503B] = {
 		.name		= "ni_pci-6503b",
 		.dio_badr	= 1,
 		.n_8255		= 1,
+		.has_mite	= 1,
 	},
 	[BOARD_NI_PCI6503X] = {
 		.name		= "ni_pci-6503x",
 		.dio_badr	= 1,
 		.n_8255		= 1,
+		.has_mite	= 1,
 	},
 	[BOARD_NI_PXI_6503] = {
 		.name		= "ni_pxi-6503",
 		.dio_badr	= 1,
 		.n_8255		= 1,
+		.has_mite	= 1,
 	},
 };

@@ -162,6 +171,25 @@ struct pci_8255_private {
 	void __iomem *mmio_base;
 };

+static int pci_8255_mite_init(struct pci_dev *pcidev)
+{
+	void __iomem *mite_base;
+	u32 main_phys_addr;
+
+	/* ioremap the MITE registers (BAR 0) temporarily */
+	mite_base = pci_ioremap_bar(pcidev, 0);
+	if (!mite_base)
+		return -ENOMEM;
+
+	/* set data window to main registers (BAR 1) */
+	main_phys_addr = pci_resource_start(pcidev, 1);
+	writel(main_phys_addr | WENAB, mite_base + MITE_IODWBSR);
+
+	/* finished with MITE registers */
+	iounmap(mite_base);
+	return 0;
+}
+
 static int pci_8255_mmio(int dir, int port, int data, unsigned long iobase)
 {
 	void __iomem *mmio_base = (void __iomem *)iobase;
@@ -201,6 +229,12 @@ static int pci_8255_auto_attach(struct comedi_device *dev,
 	if (ret)
 		return ret;

+	if (board->has_mite) {
+		ret = pci_8255_mite_init(pcidev);
+		if (ret)
+			return ret;
+	}
+
 	is_mmio = (pci_resource_flags(pcidev, board->dio_badr) &
 		   IORESOURCE_MEM) != 0;
 	if (is_mmio) {
--
1.9.1