[SRU][Eoan][raspi2][pull-request] enable v3d driver for raspi2 eoan kernel
Hui Wang
hui.wang at canonical.com
Thu Jun 18 10:25:03 UTC 2020
BugLink: https://bugs.launchpad.net/bugs/1850876
The v3d driver is not stable in the rpi-5.3.y, so we didn't enable it
in the eoan kernel, but recently uers reproted that the rpi-5.4.y has
stable v3d driver. I first cherry-picked all patches from rpi-5.3.y,
then cherry-picked 5 patches on v3d driver from rpi-5.4.y.
With this driver enabled, the glxgears and glxinfo are accelerated
and could run stable on the rpi4 board.
[Impact]
the v3d driver is not enabled in the eoan kernel, so the opengl
apps can't be accelerated.
[Fix]
cherry-pick all patches from rpi-5.3.y and cherry-pick 5 patches
from rpi-5.4.y.
[Test Case]
On the rpi4 board:
eanbled vc4-fkms-v3d, and boot the arm64 or armhf kernel, run
glxinfo -B, it indicates the v3d driver is used, run glxgears,
it runs stable.
On the rpi3B board,
boot test for arm64 kernel and armhf kernel
On the rpi2B board,
boot test for armhf kernel
[Regression Risk]
Low, just cherry-picked patches from rpi-5.3.y and rpi-5.4.y
The following changes since commit 73b7f26eb229d98353bbf8bc89979c9a3041cd63:
UBUNTU: [Config] raspi2: Set NLS_ASCII=y (2020-06-05 01:59:31 -0400)
are available in the Git repository at:
https://github.com/jason77-wang/eoan-rpi4.git:enable_v3d
for you to fetch changes up to 105e0d6dd103075be98ff17834dd2262bf3c3bff:
UBUNTU: [Config]: CONFIG_VIDEO_IRS1125=n (2020-06-18 16:06:38 +0800)
----------------------------------------------------------------
Dave Stevenson (13):
media: bcm2835-unicam: Add support for raw14 formats
media: bcm2835-unicam: Rework to not cache the list of active fmts
media: bcm2835-unicam: Support unpacking CSI format to 16bpp
media: bcm2835-unicam: Add support for luma/greyscale formats
drm/vc4: Add support for YUV color encodings and ranges
drm/vc4: Add support for H & V flips
drm/vc4: Correct handling of rotation parameter in fkms
media: bcm2835-unicam: Replace hard coded loop limit with a define
media: bcm2835-unicam: Fix one-to-many mapping for YUYV formats
staging:bcm2835-codec: Add support for ENUM_FRAMESIZES
staging: bcm2835-codec: Correct buffer type check on G_PARM
staging: bcm2835-codec: Set default and error check timeperframe
staging: bcm2835-codec: Fix imbalance in dma_buf_get/dma_buf_put
Hui Wang (4):
Revert "UBUNTU: [config] raspi2: Revert "UBUNTU: [config] raspi2: CONFIG_DRM_V3D=m""
UBUNTU: [Config]: CLK_RASPBERRYPI=y
UBUNTU: [Config]: CONFIG_ARM_RASPBERRYPI_CPUFREQ=m
UBUNTU: [Config]: CONFIG_VIDEO_IRS1125=n
James Hughes (1):
drm:vc4 Added calls for firmware display blank/unblank
Markus Proeller (4):
dt-bindings: Add binding for the Infineon IRS1125 sensor
media: i2c: Add a driver for the Infineon IRS1125 depth sensor
configs: Add CONFIG_VIDEO_IRS1125 to the defconfigs
dtoverlays: Add an overlay for the Infineon IRS1125
Phil Elwell (10):
configs: Add CONFIG_WIZNET_W5100=m and _SPI=m
overlays: Add w5500 overlay
bcm2711: Retain support for old dtbs
rpi-wm8804-soundcard: Fixed MCLKDIV for Allo Digione
dts: bcm2838: Disable DWC OTG block by default
configs: Add CGROUP_BPF and BPF_SYSCALL
drm/v3d: Don't clear MMU control bits on exception
drm/v3d: Suppress all but the first MMU error
drm/v3d: Plug dma_fence leak
drm/v3d: Set dma_mask as well as coherent_dma_mask
Sam Ravnborg (1):
drm/v3d: drop use of drmP.h
Yukimasa Sugizaki (1):
drm/v3d: Replace wait_for macros to remove use of msleep (#3510)
popcornmix (8):
v3d_drv: Handle missing clock more gracefully
v3d_drv: Allow clock retrieval by name
v3d_gem: Kick the clock so firmware knows we are using firmware clock interface
clk-raspberrypi: Allow cpufreq driver to also adjust gpu clocks
clk-raspberrypi: Also support v3d clock
clk-bcm2835: Disable v3d clock
config: Switch to upstream cpufreq driver
raspberrypi-cpufreq: Only report integer pll divisor frequencies
Documentation/devicetree/bindings/media/i2c/irs1125.txt | 48 ++++++
arch/arm/boot/dts/bcm2838.dtsi | 1 +
arch/arm/boot/dts/overlays/Makefile | 2 +
arch/arm/boot/dts/overlays/README | 22 +++
arch/arm/boot/dts/overlays/irs1125-overlay.dts | 97 ++++++++++++
arch/arm/boot/dts/overlays/w5500-overlay.dts | 63 ++++++++
arch/arm/configs/bcm2709_defconfig | 5 +
arch/arm/configs/bcm2711_defconfig | 9 ++
arch/arm/configs/bcmrpi_defconfig | 5 +
arch/arm/mach-bcm/board_bcm2835.c | 2 +
arch/arm64/configs/bcm2711_defconfig | 5 +
arch/arm64/configs/bcmrpi3_defconfig | 5 +
debian.raspi2/config/annotations | 6 +-
debian.raspi2/config/config.common.ubuntu | 6 +-
drivers/clk/bcm/clk-bcm2835.c | 32 ++--
drivers/clk/bcm/clk-raspberrypi.c | 503 ++++++++++++++++++++++++++++++++++++++++++++++++-----------
drivers/cpufreq/raspberrypi-cpufreq.c | 7 +-
drivers/gpu/drm/v3d/v3d_debugfs.c | 3 +-
drivers/gpu/drm/v3d/v3d_drv.c | 19 ++-
drivers/gpu/drm/v3d/v3d_drv.h | 54 +++++--
drivers/gpu/drm/v3d/v3d_gem.c | 19 ++-
drivers/gpu/drm/v3d/v3d_irq.c | 10 +-
drivers/gpu/drm/vc4/vc4_firmware_kms.c | 63 +++++---
drivers/gpu/drm/vc4/vc4_plane.c | 121 +++++++++++++--
drivers/gpu/drm/vc4/vc4_regs.h | 3 +
drivers/media/i2c/Kconfig | 12 ++
drivers/media/i2c/Makefile | 1 +
drivers/media/i2c/irs1125.c | 1112 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
drivers/media/i2c/irs1125.h | 61 ++++++++
drivers/media/platform/bcm2835/bcm2835-unicam.c | 400 +++++++++++++++++++++++++++++------------------
drivers/pinctrl/bcm/pinctrl-bcm2835.c | 5 +
drivers/staging/vc04_services/bcm2835-codec/bcm2835-v4l2-codec.c | 62 +++++++-
include/soc/bcm2835/raspberrypi-firmware.h | 2 +-
sound/soc/bcm/rpi-wm8804-soundcard.c | 10 +-
34 files changed, 2435 insertions(+), 340 deletions(-)
create mode 100644 Documentation/devicetree/bindings/media/i2c/irs1125.txt
create mode 100644 arch/arm/boot/dts/overlays/irs1125-overlay.dts
create mode 100644 arch/arm/boot/dts/overlays/w5500-overlay.dts
create mode 100644 drivers/media/i2c/irs1125.c
create mode 100644 drivers/media/i2c/irs1125.h
--
2.17.1
More information about the kernel-team
mailing list