NACK: [SRU] [linux-firmware] [F] [PULL v2] ath11k: Add firmware files for WCN6856

[Aaron Ma]

On 12/23/21 20:10, Kai-Heng Feng wrote:
> BugLink: https://bugs.launchpad.net/bugs/1955613
> 
> [Impact]
> Qualcomm WCN6856 doens't work.
> 
> [Fix]
> Backport missing bits to make Wifi 5 work. Wifi 6 support is not in the
> scope of this SRU. The WCN6856 requires firmware blobs to work.
> 
> [Test]
> The system can connect to Wifi. Wifi still works after several rounds of
> suspend/resume cycles.
> 
> [Where problems could occur]
> Completely new fw blobs with new user. So there's not much room to go
> wrong.
> 
> [Pull]
> The following changes since commit b3a44adcba25271f0e9ac67d4ba2c42a6ff033e3:
> 
>    UBUNTU: Ubuntu-1.187.24 (2021-12-16 16:01:59 +0100)
> 
> are available in the Git repository at:
> 
>    git+ssh://kaihengfeng@git.launchpad.net/~kaihengfeng/+git/linux-firmware ath11k-wcn6856-focal
> 
> for you to fetch changes up to bb3a531c8f3ab200651ac5c76ece5cd0110687f4:
> 
>    UBUNTU: SAUCE: ath11k: Add firmware files for WCN6856 (2021-12-23 15:18:46 +0800)
> 
> ----------------------------------------------------------------
> Kai-Heng Feng (1):
>        UBUNTU: SAUCE: ath11k: Add firmware files for WCN6856
> 
>   WHENCE                                             |    7 +
>   .../Notice.txt                                     | 1504 ++++++++++++++++++++
>   .../amss.bin                                       |  Bin 0 -> 4984832 bytes
>   .../m3.bin                                         |  Bin 0 -> 266684 bytes
>   ath11k/WCN6855/hw2.0/board-2.bin                   |  Bin 0 -> 721328 bytes
>   5 files changed, 1511 insertions(+)
>   create mode 100644 ath11k/WCN6855/hw2.0/1.1/WLAN.HSP.1.1-03003-QCAHSPSWPL_V1_V2_SILICONZ_LITE-2/Notice.txt
>   create mode 100644 ath11k/WCN6855/hw2.0/1.1/WLAN.HSP.1.1-03003-QCAHSPSWPL_V1_V2_SILICONZ_LITE-2/amss.bin
>   create mode 100644 ath11k/WCN6855/hw2.0/1.1/WLAN.HSP.1.1-03003-QCAHSPSWPL_V1_V2_SILICONZ_LITE-2/m3.bin
>   create mode 100644 ath11k/WCN6855/hw2.0/board-2.bin
> 

The right file path is:
$ ls /lib/firmware/ath11k/WCN6855/hw2.0/
amss.bin  board-2.bin  m3.bin  Notice.txt

Otherwise the fw will be failed to be downloaded.

Aaron